diff options
author | Seokmann Ju <seokmann.ju@qlogic.com> | 2007-07-05 13:16:51 -0700 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.localdomain> | 2007-07-14 19:08:05 -0500 |
commit | 2c3dfe3f6ad8daff5acdb01713e4f2b116e78136 (patch) | |
tree | 8d95e2356c0f5121ceab48ab564d2796b6530d29 /drivers/scsi/qla2xxx/qla_fw.h | |
parent | 968a5763fb7247feb0e69573a2975a7a0c094267 (diff) | |
download | kernel_goldelico_gta04-2c3dfe3f6ad8daff5acdb01713e4f2b116e78136.zip kernel_goldelico_gta04-2c3dfe3f6ad8daff5acdb01713e4f2b116e78136.tar.gz kernel_goldelico_gta04-2c3dfe3f6ad8daff5acdb01713e4f2b116e78136.tar.bz2 |
[SCSI] qla2xxx: add support for NPIV
Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.
- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 91 |
1 files changed, 79 insertions, 12 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index a0a722c..63a11fe 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -69,6 +69,16 @@ struct port_database_24xx { uint8_t reserved_3[24]; }; +struct vp_database_24xx { + uint16_t vp_status; + uint8_t options; + uint8_t id; + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + uint16_t port_id_low; + uint16_t port_id_high; +}; + struct nvram_24xx { /* NVRAM header. */ uint8_t id[4]; @@ -962,6 +972,25 @@ struct mid_db_24xx { struct mid_db_entry_24xx entries[MAX_MID_VPS]; }; + /* + * Virtual Fabric ID type definition. + */ +typedef struct vf_id { + uint16_t id : 12; + uint16_t priority : 4; +} vf_id_t; + +/* + * Virtual Fabric HopCt type definition. + */ +typedef struct vf_hopct { + uint16_t reserved : 8; + uint16_t hopct : 8; +} vf_hopct_t; + +/* + * Virtual Port Control IOCB + */ #define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */ struct vp_ctrl_entry_24xx { uint8_t entry_type; /* Entry type. */ @@ -974,6 +1003,7 @@ struct vp_ctrl_entry_24xx { uint16_t vp_idx_failed; uint16_t comp_status; /* Completion status. */ +#define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ @@ -982,24 +1012,34 @@ struct vp_ctrl_entry_24xx { #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ +#define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ uint16_t vp_count; uint8_t vp_idx_map[16]; - - uint8_t reserved_4[32]; + uint16_t flags; + struct vf_id id; + uint16_t reserved_4; + struct vf_hopct hopct; + uint8_t reserved_5[8]; }; +/* + * Modify Virtual Port Configuration IOCB + */ #define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */ struct vp_config_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ - uint8_t sys_define; /* System defined. */ + uint8_t handle_count; uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ - uint16_t reserved_1; + uint16_t flags; +#define CS_VF_BIND_VPORTS_TO_VF BIT_0 +#define CS_VF_SET_QOS_OF_VPORTS BIT_1 +#define CS_VF_SET_HOPS_OF_VPORTS BIT_2 uint16_t comp_status; /* Completion status. */ #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ @@ -1009,27 +1049,29 @@ struct vp_config_entry_24xx { #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ uint8_t command; -#define VCT_COMMAND_MOD_VPS 0x00 /* Enable VPs. */ -#define VCT_COMMAND_MOD_ENABLE_VPS 0x08 /* Disable VPs. */ +#define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ +#define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ uint8_t vp_count; - uint8_t vp_idx1; - uint8_t vp_idx2; + uint8_t vp_index1; + uint8_t vp_index2; uint8_t options_idx1; uint8_t hard_address_idx1; - uint16_t reserved_2; + uint16_t reserved_vp1; uint8_t port_name_idx1[WWN_SIZE]; uint8_t node_name_idx1[WWN_SIZE]; uint8_t options_idx2; uint8_t hard_address_idx2; - uint16_t reserved_3; + uint16_t reserved_vp2; uint8_t port_name_idx2[WWN_SIZE]; uint8_t node_name_idx2[WWN_SIZE]; - - uint8_t reserved_4[8]; + struct vf_id id; + uint16_t reserved_4; + struct vf_hopct hopct; + uint8_t reserved_5; }; #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ @@ -1054,5 +1096,30 @@ struct vp_rpt_id_entry_24xx { uint8_t reserved_4[32]; }; +#define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ +struct vf_evfp_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + uint16_t comp_status; /* Completion status. */ + uint16_t timeout; /* timeout */ + uint16_t adim_tagging_mode; + + uint16_t vfport_id; + uint32_t exch_addr; + + uint16_t nport_handle; /* N_PORT handle. */ + uint16_t control_flags; + uint32_t io_parameter_0; + uint32_t io_parameter_1; + uint32_t tx_address[2]; /* Data segment 0 address. */ + uint32_t tx_len; /* Data segment 0 length. */ + uint32_t rx_address[2]; /* Data segment 1 address. */ + uint32_t rx_len; /* Data segment 1 length. */ +}; + /* END MID Support ***********************************************************/ #endif |