diff options
author | Matthew Wilcox <matthew@wil.cx> | 2005-05-20 19:15:43 +0100 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-05-26 08:41:14 -0500 |
commit | 53222b906903fd861dc24ebccfa07ee125941313 (patch) | |
tree | a39e9a20718d01b67e89c14baa0e11411643c993 /drivers/scsi/sym53c8xx_2/sym_hipd.c | |
parent | 7c00ffa314bf0fb0e23858bbebad33b48b6abbb9 (diff) | |
download | kernel_goldelico_gta04-53222b906903fd861dc24ebccfa07ee125941313.zip kernel_goldelico_gta04-53222b906903fd861dc24ebccfa07ee125941313.tar.gz kernel_goldelico_gta04-53222b906903fd861dc24ebccfa07ee125941313.tar.bz2 |
[SCSI] sym2 version 2.2.1
sym2 version 2.2.1:
- Fix MMIO BAR detection (Thanks to Bob Picco)
- Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens)
- Write posting fixes (Thanks to Thibaut Varene)
- Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC
- Make CCB_BA() return a script-endian address
- Move range checks and disabling of devices from the queuecommand path
to slave_alloc()
- Remove a warning in sym_setup_cdb()
- Keep a pointer to the scsi_target instead of the scsi_dev in the tcb
- Remove a check for the upper layers passing an oversized cmd
- Replace CAM_REQ_ constants with the Linux DID_ constants
- Replace CAM_DIR_ constants with the Linux DMA_ constants
- Inline sym_read_parisc_pdc() on non-parisc systems
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym_hipd.c')
-rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_hipd.c | 65 |
1 files changed, 36 insertions, 29 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 50a176b..e753ba2 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -97,7 +97,7 @@ static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg) static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg) { struct sym_tcb *tp = &np->target[target]; - dev_info(&tp->sdev->sdev_target->dev, "%s: ", label); + dev_info(&tp->starget->dev, "%s: ", label); sym_show_msg(msg); printf(".\n"); @@ -149,8 +149,10 @@ static char *sym_scsi_bus_mode(int mode) static void sym_chip_reset (struct sym_hcb *np) { OUTB(np, nc_istat, SRST); + INB(np, nc_mbox1); udelay(10); OUTB(np, nc_istat, 0); + INB(np, nc_mbox1); udelay(2000); /* For BUS MODE to settle */ } @@ -216,6 +218,7 @@ int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int) OUTB(np, nc_stest3, TE); OUTB(np, nc_dcntl, (np->rv_dcntl & IRQM)); OUTB(np, nc_scntl1, CRST); + INB(np, nc_mbox1); udelay(200); if (!SYM_SETUP_SCSI_BUS_CHECK) @@ -280,8 +283,10 @@ static void sym_selectclock(struct sym_hcb *np, u_char scntl3) if (!i) printf("%s: the chip cannot lock the frequency\n", sym_name(np)); - } else - udelay((50+10)); + } else { + INB(np, nc_mbox1); + udelay(50+10); + } OUTB(np, nc_stest3, HSC); /* Halt the scsi clock */ OUTB(np, nc_scntl3, scntl3); OUTB(np, nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ @@ -1445,7 +1450,7 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget, static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgptr) { struct sym_tcb *tp = &np->target[cp->target]; - struct scsi_target *starget = tp->sdev->sdev_target; + struct scsi_target *starget = tp->starget; struct sym_trans *goal = &tp->tgoal; int msglen = 0; int nego; @@ -1690,7 +1695,7 @@ static void sym_flush_comp_queue(struct sym_hcb *np, int cam_status) if (cam_status) sym_set_cam_status(cmd, cam_status); #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING - if (sym_get_cam_status(cmd) == CAM_REQUEUE_REQ) { + if (sym_get_cam_status(cmd) == DID_SOFT_ERROR) { struct sym_tcb *tp = &np->target[cp->target]; struct sym_lcb *lp = sym_lp(tp, cp->lun); if (lp) { @@ -1791,12 +1796,13 @@ void sym_start_up (struct sym_hcb *np, int reason) /* * Wakeup all pending jobs. */ - sym_flush_busy_queue(np, CAM_SCSI_BUS_RESET); + sym_flush_busy_queue(np, DID_RESET); /* * Init chip. */ OUTB(np, nc_istat, 0x00); /* Remove Reset, abort */ + INB(np, nc_mbox1); udelay(2000); /* The 895 needs time for the bus mode to settle */ OUTB(np, nc_scntl0, np->rv_scntl0 | 0xc0); @@ -1905,6 +1911,7 @@ void sym_start_up (struct sym_hcb *np, int reason) if (np->features & (FE_ULTRA2|FE_ULTRA3)) { OUTONW(np, nc_sien, SBMC); if (reason == 0) { + INB(np, nc_mbox1); mdelay(100); INW(np, nc_sist); } @@ -2074,7 +2081,7 @@ static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs static void sym_setwide(struct sym_hcb *np, int target, u_char wide) { struct sym_tcb *tp = &np->target[target]; - struct scsi_target *starget = tp->sdev->sdev_target; + struct scsi_target *starget = tp->starget; if (spi_width(starget) == wide) return; @@ -2102,7 +2109,7 @@ sym_setsync(struct sym_hcb *np, int target, u_char ofs, u_char per, u_char div, u_char fak) { struct sym_tcb *tp = &np->target[target]; - struct scsi_target *starget = tp->sdev->sdev_target; + struct scsi_target *starget = tp->starget; u_char wide = (tp->head.wval & EWS) ? BUS_16_BIT : BUS_8_BIT; sym_settrans(np, target, 0, ofs, per, wide, div, fak); @@ -2129,7 +2136,7 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs, u_char per, u_char wide, u_char div, u_char fak) { struct sym_tcb *tp = &np->target[target]; - struct scsi_target *starget = tp->sdev->sdev_target; + struct scsi_target *starget = tp->starget; sym_settrans(np, target, opts, ofs, per, wide, div, fak); @@ -2944,7 +2951,7 @@ unknown_int: * Dequeue from the START queue all CCBs that match * a given target/lun/task condition (-1 means all), * and move them from the BUSY queue to the COMP queue - * with CAM_REQUEUE_REQ status condition. + * with DID_SOFT_ERROR status condition. * This function is used during error handling/recovery. * It is called with SCRIPTS not running. */ @@ -2974,7 +2981,7 @@ sym_dequeue_from_squeue(struct sym_hcb *np, int i, int target, int lun, int task if ((target == -1 || cp->target == target) && (lun == -1 || cp->lun == lun) && (task == -1 || cp->tag == task)) { - sym_set_cam_status(cp->cmd, CAM_REQUEUE_REQ); + sym_set_cam_status(cp->cmd, DID_SOFT_ERROR); sym_remque(&cp->link_ccbq); sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); } @@ -3093,13 +3100,13 @@ static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb /* * Message table indirect structure. */ - cp->phys.smsg.addr = cpu_to_scr(CCB_BA(cp, scsi_smsg2)); + cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg2); cp->phys.smsg.size = cpu_to_scr(msglen); /* * sense command */ - cp->phys.cmd.addr = cpu_to_scr(CCB_BA(cp, sensecmd)); + cp->phys.cmd.addr = CCB_BA(cp, sensecmd); cp->phys.cmd.size = cpu_to_scr(6); /* @@ -3116,7 +3123,7 @@ static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb * sense data */ memset(cp->sns_bbuf, 0, SYM_SNS_BBUF_LEN); - cp->phys.sense.addr = cpu_to_scr(CCB_BA(cp, sns_bbuf)); + cp->phys.sense.addr = CCB_BA(cp, sns_bbuf); cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN); /* @@ -3198,7 +3205,7 @@ int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); /* Preserve the software timeout condition */ - if (sym_get_cam_status(cmd) != CAM_CMD_TIMEOUT) + if (sym_get_cam_status(cmd) != DID_TIME_OUT) sym_set_cam_status(cmd, cam_status); ++i; #if 0 @@ -3366,7 +3373,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * Make sure at least our IO to abort has been dequeued. */ #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING - assert(i && sym_get_cam_status(cp->cmd) == CAM_REQUEUE_REQ); + assert(i && sym_get_cam_status(cp->cmd) == DID_SOFT_ERROR); #else sym_remque(&cp->link_ccbq); sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq); @@ -3375,9 +3382,9 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * Keep track in cam status of the reason of the abort. */ if (cp->to_abort == 2) - sym_set_cam_status(cp->cmd, CAM_CMD_TIMEOUT); + sym_set_cam_status(cp->cmd, DID_TIME_OUT); else - sym_set_cam_status(cp->cmd, CAM_REQ_ABORTED); + sym_set_cam_status(cp->cmd, DID_ABORT); /* * Complete with error everything that we have dequeued. @@ -3491,7 +3498,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * conditions not due to timeout. */ if (cp->to_abort == 2) - sym_set_cam_status(cp->cmd, CAM_CMD_TIMEOUT); + sym_set_cam_status(cp->cmd, DID_TIME_OUT); cp->to_abort = 0; /* We donnot expect to fail here */ break; @@ -3502,7 +3509,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) case SIR_ABORT_SENT: target = INB(np, nc_sdid) & 0xf; tp = &np->target[target]; - starget = tp->sdev->sdev_target; + starget = tp->starget; /* ** If we didn't abort anything, leave here. @@ -3551,7 +3558,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) */ i = (INL(np, nc_scratcha) - np->squeue_ba) / 4; sym_dequeue_from_squeue(np, i, target, lun, -1); - sym_clear_tasks(np, CAM_REQ_ABORTED, target, lun, task); + sym_clear_tasks(np, DID_ABORT, target, lun, task); sym_flush_comp_queue(np, 0); /* @@ -3566,7 +3573,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * Print to the log the message we intend to send. */ if (num == SIR_TARGET_SELECTED) { - dev_info(&tp->sdev->sdev_target->dev, "control msgout:"); + dev_info(&tp->starget->dev, "control msgout:"); sym_printl_hex(np->abrt_msg, np->abrt_tbl.size); np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size); } @@ -3877,6 +3884,8 @@ int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp) resid += (tmp & 0xffffff); } + resid -= cp->odd_byte_adjustment; + /* * Hopefully, the result is not too wrong. */ @@ -4758,10 +4767,8 @@ struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char t } #endif - /* - * Remember all informations needed to free this CCB. - */ cp->to_abort = 0; + cp->odd_byte_adjustment = 0; cp->tag = tag; cp->order = tag_order; cp->target = tn; @@ -5104,7 +5111,7 @@ static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln) lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); if (!lp->itlq_tbl) goto fail; - lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_KERNEL); + lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_ATOMIC); if (!lp->cb_tags) { sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL"); lp->itlq_tbl = NULL; @@ -5243,7 +5250,7 @@ int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb * /* * message */ - cp->phys.smsg.addr = cpu_to_scr(CCB_BA(cp, scsi_smsg)); + cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg); cp->phys.smsg.size = cpu_to_scr(msglen); /* @@ -5343,7 +5350,7 @@ int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, int timed_out) } /* - * Complete execution of a SCSI command with extented + * Complete execution of a SCSI command with extended * error, SCSI status error, or having been auto-sensed. * * The SCRIPTS processor is not running there, so we @@ -5441,7 +5448,7 @@ if (resid) /* * Let's requeue it to device. */ - sym_set_cam_status(cmd, CAM_REQUEUE_REQ); + sym_set_cam_status(cmd, DID_SOFT_ERROR); goto finish; } weirdness: |