Merge branch 'linux-2.6'

6 files changed, 59 insertions, 29 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index facb678..6a48dfa 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -277,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
 
+	tty_encode_baud_rate(tty,  baud, baud);
+
 	/*
 	 * Which character status flags should we ignore?
 	 */
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 6f475b6..ac2a3ef 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -442,7 +442,8 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 		set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
 			INTR_ON_BUF,
 			DIMENSION_LINEAR,
-			DATA_SIZE_8));
+			DATA_SIZE_8,
+			DMA_SYNC_RESTART));
 	set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
 	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
 	set_dma_x_modify(uart->tx_dma_channel, 1);
@@ -689,7 +690,8 @@ static int bfin_serial_startup(struct uart_port *port)
 	set_dma_config(uart->rx_dma_channel,
 		set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
 				INTR_ON_ROW, DIMENSION_2D,
-				DATA_SIZE_8));
+				DATA_SIZE_8,
+				DMA_SYNC_RESTART));
 	set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
 	set_dma_x_modify(uart->rx_dma_channel, 1);
 	set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9d3105b..9c2df5c 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -48,7 +48,7 @@
 #include <linux/vmalloc.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
-#include <linux/kobject.h>
+#include <linux/kref.h>
 #include <linux/firmware.h>
 #include <linux/bitops.h>
 
@@ -65,7 +65,7 @@
 #define ICOM_VERSION_STR "1.3.1"
 #define NR_PORTS	       128
 #define ICOM_PORT ((struct icom_port *)port)
-#define to_icom_adapter(d) container_of(d, struct icom_adapter, kobj)
+#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref)
 
 static const struct pci_device_id icom_pci_table[] = {
 	{
@@ -141,6 +141,7 @@ static inline void trace(struct icom_port *, char *, unsigned long) {};
 #else
 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
 #endif
+static void icom_kref_release(struct kref *kref);
 
 static void free_port_memory(struct icom_port *icom_port)
 {
@@ -1063,11 +1064,11 @@ static int icom_open(struct uart_port *port)
 {
 	int retval;
 
-	kobject_get(&ICOM_PORT->adapter->kobj);
+	kref_get(&ICOM_PORT->adapter->kref);
 	retval = startup(ICOM_PORT);
 
 	if (retval) {
-		kobject_put(&ICOM_PORT->adapter->kobj);
+		kref_put(&ICOM_PORT->adapter->kref, icom_kref_release);
 		trace(ICOM_PORT, "STARTUP_ERROR", 0);
 		return retval;
 	}
@@ -1088,7 +1089,7 @@ static void icom_close(struct uart_port *port)
 
 	shutdown(ICOM_PORT);
 
-	kobject_put(&ICOM_PORT->adapter->kobj);
+	kref_put(&ICOM_PORT->adapter->kref, icom_kref_release);
 }
 
 static void icom_set_termios(struct uart_port *port,
@@ -1485,18 +1486,14 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
 	pci_release_regions(icom_adapter->pci_dev);
 }
 
-static void icom_kobj_release(struct kobject *kobj)
+static void icom_kref_release(struct kref *kref)
 {
 	struct icom_adapter *icom_adapter;
 
-	icom_adapter = to_icom_adapter(kobj);
+	icom_adapter = to_icom_adapter(kref);
 	icom_remove_adapter(icom_adapter);
 }
 
-static struct kobj_type icom_kobj_type = {
-	.release = icom_kobj_release,
-};
-
 static int __devinit icom_probe(struct pci_dev *dev,
 				const struct pci_device_id *ent)
 {
@@ -1592,8 +1589,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		}
 	}
 
-	kobject_init(&icom_adapter->kobj);
-	icom_adapter->kobj.ktype = &icom_kobj_type;
+	kref_init(&icom_adapter->kref);
 	return 0;
 
 probe_exit2:
@@ -1619,7 +1615,7 @@ static void __devexit icom_remove(struct pci_dev *dev)
 		icom_adapter = list_entry(tmp, struct icom_adapter,
 					  icom_adapter_entry);
 		if (icom_adapter->pci_dev == dev) {
-			kobject_put(&icom_adapter->kobj);
+			kref_put(&icom_adapter->kref, icom_kref_release);
 			return;
 		}
 	}
diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h
index e8578d8..0274554 100644
--- a/drivers/serial/icom.h
+++ b/drivers/serial/icom.h
@@ -270,7 +270,7 @@ struct icom_adapter {
 #define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM	0x0251
 	int numb_ports;
 	struct list_head icom_adapter_entry;
-	struct kobject kobj;
+	struct kref kref;
 };
 
 /* prototype */
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 73440e2..ddf6391 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -302,7 +302,7 @@ static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
 	}
 	sci_out(port, SCFCR, fcr_val);
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
 	unsigned int fcr_val = 0;
@@ -395,7 +395,8 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 	} else {
 #ifdef CONFIG_CPU_SUBTYPE_SH7343
 		/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SHX3)
 		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
@@ -408,6 +409,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 static inline int scif_txroom(struct uart_port *port)
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d24621c..f5764eb 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -46,7 +46,8 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
 #define SCIF_ORER    0x0200   /* overrun error bit */
@@ -119,6 +120,12 @@
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
+# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
@@ -142,7 +149,9 @@
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7206) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7263)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
@@ -214,7 +223,8 @@
 #define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720)
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCIF_ORER    0x0200
 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 #define SCIF_RFDC_MASK 0x007f
@@ -252,7 +262,8 @@
 # define SCxSR_PER(port)		SCIF_PER
 # define SCxSR_BRK(port)		SCIF_BRK
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720)
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
 # define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
 # define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
@@ -361,7 +372,8 @@
 #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7720)
+      defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -388,7 +400,8 @@
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720)
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -412,6 +425,7 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
@@ -510,7 +524,8 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port)
 		return;
 	}
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7721)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xa4430000)
@@ -580,6 +595,15 @@ static inline int sci_rxd_in(struct uart_port *port)
 	int ch = (port->mapbase - SMR0) >> 3;
 	return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffe08000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 static inline int sci_rxd_in(struct uart_port *port)
 {
@@ -617,7 +641,9 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7206) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7263)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfffe8000)
@@ -688,11 +714,13 @@ static inline int sci_rxd_in(struct uart_port *port)
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7720)
+      defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)