diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-14 10:22:11 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-14 10:22:11 -0800 |
commit | 478e4e9d7a618379676b17e64583ff3622f2fec5 (patch) | |
tree | 1f25c96499abbb0d0b47f75aa92134209fcc4ee8 /drivers/spi/mpc52xx_spi.c | |
parent | 2205afa7d13ec716935dfd4b8ff71059ee7aeb0c (diff) | |
parent | 965346e3b99e2c5f51bd1325ddd0257227000355 (diff) | |
download | kernel_goldelico_gta04-478e4e9d7a618379676b17e64583ff3622f2fec5.zip kernel_goldelico_gta04-478e4e9d7a618379676b17e64583ff3622f2fec5.tar.gz kernel_goldelico_gta04-478e4e9d7a618379676b17e64583ff3622f2fec5.tar.bz2 |
Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
spi: fix probe/remove section markings
Add OMAP spi100k driver
spi-imx: don't access struct device directly but use dev_get_platdata
spi-imx: Add mx25 support
spi-imx: use positive logic to distinguish cpu variants
spi-imx: correct check for platform_get_irq failing
ARM: NUC900: Add spi driver support for nuc900
spi: SuperH MSIOF SPI Master driver V2
spi: fix spidev compilation failure when VERBOSE is defined
spi/au1550_spi: fix setupxfer not to override cfg with zeros
spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
spi/i.MX: fix broken error handling for gpio_request
spi/i.mx: drain MXC SPI transfer buffer when probing device
MAINTAINERS: add SPI co-maintainer.
spi/xilinx_spi: fix incorrect casting
spi/mpc52xx-spi: minor cleanups
xilinx_spi: add a platform driver using the xilinx_spi common module.
xilinx_spi: add support for the DS570 IP.
xilinx_spi: Switch to iomem functions and support little endian.
xilinx_spi: Split into of driver and generic part.
...
Diffstat (limited to 'drivers/spi/mpc52xx_spi.c')
-rw-r--r-- | drivers/spi/mpc52xx_spi.c | 86 |
1 files changed, 72 insertions, 14 deletions
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c index ef8379b..45bfe64 100644 --- a/drivers/spi/mpc52xx_spi.c +++ b/drivers/spi/mpc52xx_spi.c @@ -18,9 +18,9 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/spi/spi.h> -#include <linux/spi/mpc52xx_spi.h> #include <linux/of_spi.h> #include <linux/io.h> +#include <linux/of_gpio.h> #include <asm/time.h> #include <asm/mpc52xx.h> @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL"); /* FSM state return values */ #define FSM_STOP 0 /* Nothing more for the state machine to */ /* do. If something interesting happens */ - /* then and IRQ will be received */ + /* then an IRQ will be received */ #define FSM_POLL 1 /* need to poll for completion, an IRQ is */ /* not expected */ #define FSM_CONTINUE 2 /* Keep iterating the state machine */ @@ -61,13 +61,12 @@ MODULE_LICENSE("GPL"); /* Driver internal data */ struct mpc52xx_spi { struct spi_master *master; - u32 sysclk; void __iomem *regs; int irq0; /* MODF irq */ int irq1; /* SPIF irq */ - int ipb_freq; + unsigned int ipb_freq; - /* Statistics */ + /* Statistics; not used now, but will be reintroduced for debugfs */ int msg_count; int wcol_count; int wcol_ticks; @@ -79,7 +78,6 @@ struct mpc52xx_spi { spinlock_t lock; struct work_struct work; - /* Details of current transfer (length, and buffer pointers) */ struct spi_message *message; /* current message */ struct spi_transfer *transfer; /* current transfer */ @@ -89,6 +87,8 @@ struct mpc52xx_spi { u8 *rx_buf; const u8 *tx_buf; int cs_change; + int gpio_cs_count; + unsigned int *gpio_cs; }; /* @@ -96,7 +96,13 @@ struct mpc52xx_spi { */ static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) { - out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); + int cs; + + if (ms->gpio_cs_count > 0) { + cs = ms->message->spi->chip_select; + gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); + } else + out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); } /* @@ -221,7 +227,7 @@ static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, ms->wcol_tx_timestamp = get_tbl(); data = 0; if (ms->tx_buf) - data = *(ms->tx_buf-1); + data = *(ms->tx_buf - 1); out_8(ms->regs + SPI_DATA, data); /* try again */ return FSM_CONTINUE; } else if (status & SPI_STATUS_MODF) { @@ -390,7 +396,9 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, struct spi_master *master; struct mpc52xx_spi *ms; void __iomem *regs; - int rc; + u8 ctrl1; + int rc, i = 0; + int gpio_cs; /* MMIO registers */ dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); @@ -399,7 +407,8 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, return -ENODEV; /* initialize the device */ - out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR); + ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; + out_8(regs + SPI_CTRL1, ctrl1); out_8(regs + SPI_CTRL2, 0x0); out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ @@ -409,6 +418,8 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, * on the SPI bus. This fault will also occur if the SPI signals * are not connected to any pins (port_config setting) */ in_8(regs + SPI_STATUS); + out_8(regs + SPI_CTRL1, ctrl1); + in_8(regs + SPI_DATA); if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { dev_err(&op->dev, "mode fault; is port_config correct?\n"); @@ -422,10 +433,12 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, rc = -ENOMEM; goto err_alloc; } + master->bus_num = -1; - master->num_chipselect = 1; master->setup = mpc52xx_spi_setup; master->transfer = mpc52xx_spi_transfer; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + dev_set_drvdata(&op->dev, master); ms = spi_master_get_devdata(master); @@ -435,16 +448,51 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, ms->irq1 = irq_of_parse_and_map(op->node, 1); ms->state = mpc52xx_spi_fsmstate_idle; ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node); + ms->gpio_cs_count = of_gpio_count(op->node); + if (ms->gpio_cs_count > 0) { + master->num_chipselect = ms->gpio_cs_count; + ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), + GFP_KERNEL); + if (!ms->gpio_cs) { + rc = -ENOMEM; + goto err_alloc; + } + + for (i = 0; i < ms->gpio_cs_count; i++) { + gpio_cs = of_get_gpio(op->node, i); + if (gpio_cs < 0) { + dev_err(&op->dev, + "could not parse the gpio field " + "in oftree\n"); + rc = -ENODEV; + goto err_gpio; + } + + rc = gpio_request(gpio_cs, dev_name(&op->dev)); + if (rc) { + dev_err(&op->dev, + "can't request spi cs gpio #%d " + "on gpio line %d\n", i, gpio_cs); + goto err_gpio; + } + + gpio_direction_output(gpio_cs, 1); + ms->gpio_cs[i] = gpio_cs; + } + } else { + master->num_chipselect = 1; + } + spin_lock_init(&ms->lock); INIT_LIST_HEAD(&ms->queue); INIT_WORK(&ms->work, mpc52xx_spi_wq); /* Decide if interrupts can be used */ if (ms->irq0 && ms->irq1) { - rc = request_irq(ms->irq0, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM, + rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, "mpc5200-spi-modf", ms); - rc |= request_irq(ms->irq1, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM, - "mpc5200-spi-spiF", ms); + rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, + "mpc5200-spi-spif", ms); if (rc) { free_irq(ms->irq0, ms); free_irq(ms->irq1, ms); @@ -471,6 +519,11 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op, err_register: dev_err(&ms->master->dev, "initialization failed\n"); spi_master_put(master); + err_gpio: + while (i-- > 0) + gpio_free(ms->gpio_cs[i]); + + kfree(ms->gpio_cs); err_alloc: err_init: iounmap(regs); @@ -481,10 +534,15 @@ static int __devexit mpc52xx_spi_remove(struct of_device *op) { struct spi_master *master = dev_get_drvdata(&op->dev); struct mpc52xx_spi *ms = spi_master_get_devdata(master); + int i; free_irq(ms->irq0, ms); free_irq(ms->irq1, ms); + for (i = 0; i < ms->gpio_cs_count; i++) + gpio_free(ms->gpio_cs[i]); + + kfree(ms->gpio_cs); spi_unregister_master(master); spi_master_put(master); iounmap(ms->regs); |