diff options
author | corentin.labbe <corentin.labbe@geomatys.fr> | 2007-06-13 20:27:36 +0200 |
---|---|---|
committer | Mark M. Hoffman <mhoffman@lightlink.com> | 2007-07-19 14:22:14 -0400 |
commit | b74f3fdd98c7186930b8ee841dc542dfdba95473 (patch) | |
tree | a154e178724a40cd7b82634ad9d0cb4b538786e3 /drivers | |
parent | 04a6217df28e3004ba4e76eb0a356a30f72c564f (diff) | |
download | kernel_goldelico_gta04-b74f3fdd98c7186930b8ee841dc542dfdba95473.zip kernel_goldelico_gta04-b74f3fdd98c7186930b8ee841dc542dfdba95473.tar.gz kernel_goldelico_gta04-b74f3fdd98c7186930b8ee841dc542dfdba95473.tar.bz2 |
hwmon: convert it87 to platform driver
This is the patch for converting it87 to a platform driver (and remove i2c-isa).
Signed-off-by: Corentin LABBE <corentin.labbe@geomatys.fr>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 2 | ||||
-rw-r--r-- | drivers/hwmon/it87.c | 496 |
2 files changed, 277 insertions, 221 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index aea2d57..9f01ede 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -250,8 +250,6 @@ config SENSORS_CORETEMP config SENSORS_IT87 tristate "ITE IT87xx and compatibles" - depends on I2C - select I2C_ISA select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 1dd7654..eff6036 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -31,8 +31,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-isa.h> +#include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/hwmon-vid.h> @@ -41,10 +40,12 @@ #include <linux/sysfs.h> #include <asm/io.h> +#define DRVNAME "it87" -static unsigned short isa_address; enum chips { it87, it8712, it8716, it8718 }; +static struct platform_device *pdev; + #define REG 0x2e /* The register to read/write */ #define DEV 0x07 /* Register: Logical device select */ #define VAL 0x2f /* The value to read/write */ @@ -112,10 +113,6 @@ static int update_vbat; /* Not all BIOSes properly configure the PWM registers */ static int fix_pwm_polarity; -/* Values read from Super-I/O config space */ -static u16 chip_type; -static u8 vid_value; - /* Many IT87 constants specified below */ /* Length of ISA address segment */ @@ -216,13 +213,20 @@ static const unsigned int pwm_freq[8] = { }; +struct it87_sio_data { + enum chips type; + /* Values read from Super-I/O config space */ + u8 vid_value; +}; + /* For each registered chip, we need to keep some data in memory. The structure is dynamically allocated. */ struct it87_data { - struct i2c_client client; struct class_device *class_dev; enum chips type; + unsigned short addr; + const char *name; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -247,26 +251,25 @@ struct it87_data { }; -static int it87_detect(struct i2c_adapter *adapter); -static int it87_detach_client(struct i2c_client *client); +static int it87_probe(struct platform_device *pdev); +static int it87_remove(struct platform_device *pdev); -static int it87_read_value(struct i2c_client *client, u8 reg); -static void it87_write_value(struct i2c_client *client, u8 reg, u8 value); +static int it87_read_value(struct it87_data *data, u8 reg); +static void it87_write_value(struct it87_data *data, u8 reg, u8 value); static struct it87_data *it87_update_device(struct device *dev); -static int it87_check_pwm(struct i2c_client *client); -static void it87_init_client(struct i2c_client *client, struct it87_data *data); +static int it87_check_pwm(struct device *dev); +static void it87_init_device(struct platform_device *pdev); -static struct i2c_driver it87_isa_driver = { +static struct platform_driver it87_driver = { .driver = { .owner = THIS_MODULE, - .name = "it87-isa", + .name = DRVNAME, }, - .attach_adapter = it87_detect, - .detach_client = it87_detach_client, + .probe = it87_probe, + .remove = __devexit_p(it87_remove), }; - static ssize_t show_in(struct device *dev, struct device_attribute *attr, char *buf) { @@ -303,13 +306,12 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->in_min[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MIN(nr), + it87_write_value(data, IT87_REG_VIN_MIN(nr), data->in_min[nr]); mutex_unlock(&data->update_lock); return count; @@ -320,13 +322,12 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->in_max[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MAX(nr), + it87_write_value(data, IT87_REG_VIN_MAX(nr), data->in_max[nr]); mutex_unlock(&data->update_lock); return count; @@ -394,13 +395,12 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp_high[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); + it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); mutex_unlock(&data->update_lock); return count; } @@ -410,13 +410,12 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp_low[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); + it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); mutex_unlock(&data->update_lock); return count; } @@ -453,8 +452,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); @@ -470,7 +468,7 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return -EINVAL; } - it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); + it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor); mutex_unlock(&data->update_lock); return count; } @@ -544,13 +542,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); u8 reg; mutex_lock(&data->update_lock); - reg = it87_read_value(client, IT87_REG_FAN_DIV); + reg = it87_read_value(data, IT87_REG_FAN_DIV); switch (nr) { case 0: data->fan_div[nr] = reg & 0x07; break; case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break; @@ -558,7 +555,7 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, } data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); + it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } @@ -568,14 +565,13 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); unsigned long val = simple_strtoul(buf, NULL, 10); int min; u8 old; mutex_lock(&data->update_lock); - old = it87_read_value(client, IT87_REG_FAN_DIV); + old = it87_read_value(data, IT87_REG_FAN_DIV); /* Save fan min limit */ min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); @@ -596,11 +592,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, val |= (data->fan_div[1] & 0x07) << 3; if (data->fan_div[2] == 3) val |= 0x1 << 6; - it87_write_value(client, IT87_REG_FAN_DIV, val); + it87_write_value(data, IT87_REG_FAN_DIV, val); /* Restore fan min limit */ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); + it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; @@ -611,8 +607,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); @@ -620,17 +615,17 @@ static ssize_t set_pwm_enable(struct device *dev, if (val == 0) { int tmp; /* make sure the fan is on when in on/off mode */ - tmp = it87_read_value(client, IT87_REG_FAN_CTL); - it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr)); + tmp = it87_read_value(data, IT87_REG_FAN_CTL); + it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr)); /* set on/off mode */ data->fan_main_ctrl &= ~(1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } else if (val == 1) { /* set SmartGuardian mode */ data->fan_main_ctrl |= (1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); /* set saved pwm value, clear FAN_CTLX PWM mode bit */ - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); } else { mutex_unlock(&data->update_lock); return -EINVAL; @@ -645,8 +640,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); if (val < 0 || val > 255) @@ -655,15 +649,14 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->manual_pwm_ctl[nr] = val; if (data->fan_main_ctrl & (1 << nr)) - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); mutex_unlock(&data->update_lock); return count; } static ssize_t set_pwm_freq(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); unsigned long val = simple_strtoul(buf, NULL, 10); int i; @@ -674,9 +667,9 @@ static ssize_t set_pwm_freq(struct device *dev, } mutex_lock(&data->update_lock); - data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL) & 0x8f; + data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f; data->fan_ctl |= i << 4; - it87_write_value(client, IT87_REG_FAN_CTL, data->fan_ctl); + it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl); mutex_unlock(&data->update_lock); return count; @@ -731,15 +724,14 @@ static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr, { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->fan_min[nr] = FAN16_TO_REG(val); - it87_write_value(client, IT87_REG_FAN_MIN(nr), + it87_write_value(data, IT87_REG_FAN_MIN(nr), data->fan_min[nr] & 0xff); - it87_write_value(client, IT87_REG_FANX_MIN(nr), + it87_write_value(data, IT87_REG_FANX_MIN(nr), data->fan_min[nr] >> 8); mutex_unlock(&data->update_lock); return count; @@ -777,8 +769,7 @@ show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); u32 val; val = simple_strtoul(buf, NULL, 10); @@ -796,6 +787,14 @@ show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct it87_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", data->name); +} +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + static struct attribute *it87_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -837,6 +836,7 @@ static struct attribute *it87_attributes[] = { &sensor_dev_attr_temp3_type.dev_attr.attr, &dev_attr_alarms.attr, + &dev_attr_name.attr, NULL }; @@ -879,18 +879,36 @@ static const struct attribute_group it87_group_opt = { }; /* SuperIO detection - will change isa_address if a chip is found */ -static int __init it87_find(unsigned short *address) +static int __init it87_find(unsigned short *address, + struct it87_sio_data *sio_data) { int err = -ENODEV; + u16 chip_type; superio_enter(); chip_type = superio_inw(DEVID); - if (chip_type != IT8712F_DEVID - && chip_type != IT8716F_DEVID - && chip_type != IT8726F_DEVID - && chip_type != IT8718F_DEVID - && chip_type != IT8705F_DEVID) - goto exit; + + switch (chip_type) { + case IT8705F_DEVID: + sio_data->type = it87; + break; + case IT8712F_DEVID: + sio_data->type = it8712; + break; + case IT8716F_DEVID: + case IT8726F_DEVID: + sio_data->type = it8716; + break; + case IT8718F_DEVID: + sio_data->type = it8718; + break; + case 0xffff: /* No device at all */ + goto exit; + default: + pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n", + chip_type); + goto exit; + } superio_select(PME); if (!(superio_inb(IT87_ACT_REG) & 0x01)) { @@ -914,7 +932,7 @@ static int __init it87_find(unsigned short *address) superio_select(GPIO); if (chip_type == it8718) - vid_value = superio_inb(IT87_SIO_VID_REG); + sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); if (reg & (1 << 0)) @@ -928,18 +946,26 @@ exit: return err; } -/* This function is called by i2c_probe */ -static int it87_detect(struct i2c_adapter *adapter) +static int __devinit it87_probe(struct platform_device *pdev) { - struct i2c_client *new_client; struct it87_data *data; + struct resource *res; + struct device *dev = &pdev->dev; + struct it87_sio_data *sio_data = dev->platform_data; int err = 0; - const char *name; int enable_pwm_interface; - - /* Reserve the ISA region */ - if (!request_region(isa_address, IT87_EXTENT, - it87_isa_driver.driver.name)){ + static const char *names[] = { + "it87", + "it8712", + "it8716", + "it8718", + }; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!request_region(res->start, IT87_EXTENT, DRVNAME)) { + dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", + (unsigned long)res->start, + (unsigned long)(res->start + IT87_EXTENT - 1)); err = -EBUSY; goto ERROR0; } @@ -949,131 +975,104 @@ static int it87_detect(struct i2c_adapter *adapter) goto ERROR1; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = isa_address; - new_client->adapter = adapter; - new_client->driver = &it87_isa_driver; + data->addr = res->start; + data->type = sio_data->type; + data->name = names[sio_data->type]; /* Now, we do the remaining detection. */ - if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) - || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) { + if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) + || it87_read_value(data, IT87_REG_CHIPID) != 0x90) { err = -ENODEV; goto ERROR2; } - /* Determine the chip type. */ - switch (chip_type) { - case IT8712F_DEVID: - data->type = it8712; - name = "it8712"; - break; - case IT8726F_DEVID: - /* fall through */ - case IT8716F_DEVID: - data->type = it8716; - name = "it8716"; - break; - case IT8718F_DEVID: - data->type = it8718; - name = "it8718"; - break; - default: - data->type = it87; - name = "it87"; - } + platform_set_drvdata(pdev, data); - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - /* Check PWM configuration */ - enable_pwm_interface = it87_check_pwm(new_client); + enable_pwm_interface = it87_check_pwm(dev); /* Initialize the IT87 chip */ - it87_init_client(new_client, data); + it87_init_device(pdev); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group))) - goto ERROR3; + if ((err = sysfs_create_group(&dev->kobj, &it87_group))) + goto ERROR2; /* Do not create fan files for disabled fans */ if (data->type == it8716 || data->type == it8718) { /* 16-bit tachometers */ if (data->has_fan & (1 << 0)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan1_input16.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan1_min16.dev_attr))) goto ERROR4; } if (data->has_fan & (1 << 1)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan2_input16.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan2_min16.dev_attr))) goto ERROR4; } if (data->has_fan & (1 << 2)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan3_input16.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan3_min16.dev_attr))) goto ERROR4; } } else { /* 8-bit tachometers with clock divider */ if (data->has_fan & (1 << 0)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan1_input.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan1_min.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan1_div.dev_attr))) goto ERROR4; } if (data->has_fan & (1 << 1)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan2_input.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan2_min.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan2_div.dev_attr))) goto ERROR4; } if (data->has_fan & (1 << 2)) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_fan3_input.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan3_min.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_fan3_div.dev_attr))) goto ERROR4; } } if (enable_pwm_interface) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(dev, &sensor_dev_attr_pwm1_enable.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_pwm2_enable.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_pwm3_enable.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_pwm1.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_pwm2.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &dev_attr_pwm1_freq)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &dev_attr_pwm2_freq)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &dev_attr_pwm3_freq))) goto ERROR4; } @@ -1082,15 +1081,15 @@ static int it87_detect(struct i2c_adapter *adapter) || data->type == it8718) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ - data->vid = vid_value; - if ((err = device_create_file(&new_client->dev, + data->vid = sio_data->vid_value; + if ((err = device_create_file(dev, &dev_attr_vrm)) - || (err = device_create_file(&new_client->dev, + || (err = device_create_file(dev, &dev_attr_cpu0_vid))) goto ERROR4; } - data->class_dev = hwmon_device_register(&new_client->dev); + data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto ERROR4; @@ -1099,31 +1098,27 @@ static int it87_detect(struct i2c_adapter *adapter) return 0; ERROR4: - sysfs_remove_group(&new_client->dev.kobj, &it87_group); - sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt); -ERROR3: - i2c_detach_client(new_client); + sysfs_remove_group(&dev->kobj, &it87_group); + sysfs_remove_group(&dev->kobj, &it87_group_opt); ERROR2: + platform_set_drvdata(pdev, NULL); kfree(data); ERROR1: - release_region(isa_address, IT87_EXTENT); + release_region(res->start, IT87_EXTENT); ERROR0: return err; } -static int it87_detach_client(struct i2c_client *client) +static int __devexit it87_remove(struct platform_device *pdev) { - struct it87_data *data = i2c_get_clientdata(client); - int err; + struct it87_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->class_dev); - sysfs_remove_group(&client->dev.kobj, &it87_group); - sysfs_remove_group(&client->dev.kobj, &it87_group_opt); + sysfs_remove_group(&pdev->dev.kobj, &it87_group); + sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt); - if ((err = i2c_detach_client(client))) - return err; - - release_region(client->addr, IT87_EXTENT); + release_region(data->addr, IT87_EXTENT); + platform_set_drvdata(pdev, NULL); kfree(data); return 0; @@ -1132,28 +1127,29 @@ static int it87_detach_client(struct i2c_client *client) /* Must be called with data->update_lock held, except during initialization. We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, would slow down the IT87 access and should not be necessary. */ -static int it87_read_value(struct i2c_client *client, u8 reg) +static int it87_read_value(struct it87_data *data, u8 reg) { - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - return inb_p(client->addr + IT87_DATA_REG_OFFSET); + outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); + return inb_p(data->addr + IT87_DATA_REG_OFFSET); } /* Must be called with data->update_lock held, except during initialization. We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, would slow down the IT87 access and should not be necessary. */ -static void it87_write_value(struct i2c_client *client, u8 reg, u8 value) +static void it87_write_value(struct it87_data *data, u8 reg, u8 value) { - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - outb_p(value, client->addr + IT87_DATA_REG_OFFSET); + outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); + outb_p(value, data->addr + IT87_DATA_REG_OFFSET); } /* Return 1 if and only if the PWM interface is safe to use */ -static int it87_check_pwm(struct i2c_client *client) +static int __devinit it87_check_pwm(struct device *dev) { + struct it87_data *data = dev_get_drvdata(dev); /* Some BIOSes fail to correctly configure the IT87 fans. All fans off * and polarity set to active low is sign that this is the case so we * disable pwm control to protect the user. */ - int tmp = it87_read_value(client, IT87_REG_FAN_CTL); + int tmp = it87_read_value(data, IT87_REG_FAN_CTL); if ((tmp & 0x87) == 0) { if (fix_pwm_polarity) { /* The user asks us to attempt a chip reconfiguration. @@ -1163,7 +1159,7 @@ static int it87_check_pwm(struct i2c_client *client) u8 pwm[3]; for (i = 0; i < 3; i++) - pwm[i] = it87_read_value(client, + pwm[i] = it87_read_value(data, IT87_REG_PWM(i)); /* If any fan is in automatic pwm mode, the polarity @@ -1171,26 +1167,26 @@ static int it87_check_pwm(struct i2c_client *client) * better don't change anything (but still disable the * PWM interface). */ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { - dev_info(&client->dev, "Reconfiguring PWM to " + dev_info(dev, "Reconfiguring PWM to " "active high polarity\n"); - it87_write_value(client, IT87_REG_FAN_CTL, + it87_write_value(data, IT87_REG_FAN_CTL, tmp | 0x87); for (i = 0; i < 3; i++) - it87_write_value(client, + it87_write_value(data, IT87_REG_PWM(i), 0x7f & ~pwm[i]); return 1; } - dev_info(&client->dev, "PWM configuration is " + dev_info(dev, "PWM configuration is " "too broken to be fixed\n"); } - dev_info(&client->dev, "Detected broken BIOS " + dev_info(dev, "Detected broken BIOS " "defaults, disabling PWM interface\n"); return 0; } else if (fix_pwm_polarity) { - dev_info(&client->dev, "PWM configuration looks " + dev_info(dev, "PWM configuration looks " "sane, won't touch\n"); } @@ -1198,8 +1194,9 @@ static int it87_check_pwm(struct i2c_client *client) } /* Called when we have found a new IT87. */ -static void it87_init_client(struct i2c_client *client, struct it87_data *data) +static void __devinit it87_init_device(struct platform_device *pdev) { + struct it87_data *data = platform_get_drvdata(pdev); int tmp, i; /* initialize to sane defaults: @@ -1219,48 +1216,48 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data) * means -1 degree C, which surprisingly doesn't trigger an alarm, * but is still confusing, so change to 127 degrees C. */ for (i = 0; i < 8; i++) { - tmp = it87_read_value(client, IT87_REG_VIN_MIN(i)); + tmp = it87_read_value(data, IT87_REG_VIN_MIN(i)); if (tmp == 0xff) - it87_write_value(client, IT87_REG_VIN_MIN(i), 0); + it87_write_value(data, IT87_REG_VIN_MIN(i), 0); } for (i = 0; i < 3; i++) { - tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i)); + tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i)); if (tmp == 0xff) - it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127); + it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); } /* Check if temperature channnels are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); + tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { /* Temp1,Temp3=thermistor; Temp2=thermal diode */ tmp = (tmp & 0xc0) | 0x2a; - it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); + it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp); } data->sensor = tmp; /* Check if voltage monitors are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); + tmp = it87_read_value(data, IT87_REG_VIN_ENABLE); if ((tmp & 0xff) == 0) { /* Enable all voltage monitors */ - it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); + it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff); } /* Check if tachometers are reset manually or by some reason */ - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); + data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); if ((data->fan_main_ctrl & 0x70) == 0) { /* Enable all fan tachometers */ data->fan_main_ctrl |= 0x70; - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; /* Set tachometers to 16-bit mode if needed */ if (data->type == it8716 || data->type == it8718) { - tmp = it87_read_value(client, IT87_REG_FAN_16BIT); + tmp = it87_read_value(data, IT87_REG_FAN_16BIT); if (~tmp & 0x07 & data->has_fan) { - dev_dbg(&client->dev, + dev_dbg(&pdev->dev, "Setting fan1-3 to 16-bit mode\n"); - it87_write_value(client, IT87_REG_FAN_16BIT, + it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } } @@ -1270,7 +1267,7 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data) for (i = 0; i < 3; i++) { if (data->fan_main_ctrl & (1 << i)) { /* pwm mode */ - tmp = it87_read_value(client, IT87_REG_PWM(i)); + tmp = it87_read_value(data, IT87_REG_PWM(i)); if (tmp & 0x80) { /* automatic pwm - not yet implemented, but * leave the settings made by the BIOS alone @@ -1284,15 +1281,14 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data) } /* Start monitoring */ - it87_write_value(client, IT87_REG_CONFIG, - (it87_read_value(client, IT87_REG_CONFIG) & 0x36) + it87_write_value(data, IT87_REG_CONFIG, + (it87_read_value(data, IT87_REG_CONFIG) & 0x36) | (update_vbat ? 0x41 : 0x01)); } static struct it87_data *it87_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); + struct it87_data *data = dev_get_drvdata(dev); int i; mutex_lock(&data->update_lock); @@ -1303,20 +1299,20 @@ static struct it87_data *it87_update_device(struct device *dev) if (update_vbat) { /* Cleared after each update, so reenable. Value returned by this read will be previous value */ - it87_write_value(client, IT87_REG_CONFIG, - it87_read_value(client, IT87_REG_CONFIG) | 0x40); + it87_write_value(data, IT87_REG_CONFIG, + it87_read_value(data, IT87_REG_CONFIG) | 0x40); } for (i = 0; i <= 7; i++) { data->in[i] = - it87_read_value(client, IT87_REG_VIN(i)); + it87_read_value(data, IT87_REG_VIN(i)); data->in_min[i] = - it87_read_value(client, IT87_REG_VIN_MIN(i)); + it87_read_value(data, IT87_REG_VIN_MIN(i)); data->in_max[i] = - it87_read_value(client, IT87_REG_VIN_MAX(i)); + it87_read_value(data, IT87_REG_VIN_MAX(i)); } /* in8 (battery) has no limit registers */ data->in[8] = - it87_read_value(client, IT87_REG_VIN(8)); + it87_read_value(data, IT87_REG_VIN(8)); for (i = 0; i < 3; i++) { /* Skip disabled fans */ @@ -1324,46 +1320,47 @@ static struct it87_data *it87_update_device(struct device *dev) continue; data->fan_min[i] = - it87_read_value(client, IT87_REG_FAN_MIN(i)); - data->fan[i] = it87_read_value(client, + it87_read_value(data, IT87_REG_FAN_MIN(i)); + data->fan[i] = it87_read_value(data, IT87_REG_FAN(i)); /* Add high byte if in 16-bit mode */ if (data->type == it8716 || data->type == it8718) { - data->fan[i] |= it87_read_value(client, + data->fan[i] |= it87_read_value(data, IT87_REG_FANX(i)) << 8; - data->fan_min[i] |= it87_read_value(client, + data->fan_min[i] |= it87_read_value(data, IT87_REG_FANX_MIN(i)) << 8; } } for (i = 0; i < 3; i++) { data->temp[i] = - it87_read_value(client, IT87_REG_TEMP(i)); + it87_read_value(data, IT87_REG_TEMP(i)); data->temp_high[i] = - it87_read_value(client, IT87_REG_TEMP_HIGH(i)); + it87_read_value(data, IT87_REG_TEMP_HIGH(i)); data->temp_low[i] = - it87_read_value(client, IT87_REG_TEMP_LOW(i)); + it87_read_value(data, IT87_REG_TEMP_LOW(i)); } /* Newer chips don't have clock dividers */ if ((data->has_fan & 0x07) && data->type != it8716 && data->type != it8718) { - i = it87_read_value(client, IT87_REG_FAN_DIV); + i = it87_read_value(data, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; data->fan_div[2] = (i & 0x40) ? 3 : 1; } data->alarms = - it87_read_value(client, IT87_REG_ALARM1) | - (it87_read_value(client, IT87_REG_ALARM2) << 8) | - (it87_read_value(client, IT87_REG_ALARM3) << 16); - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL); - - data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); + it87_read_value(data, IT87_REG_ALARM1) | + (it87_read_value(data, IT87_REG_ALARM2) << 8) | + (it87_read_value(data, IT87_REG_ALARM3) << 16); + data->fan_main_ctrl = it87_read_value(data, + IT87_REG_FAN_MAIN_CTRL); + data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); + + data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability */ if (data->type == it8712 || data->type == it8716) { - data->vid = it87_read_value(client, IT87_REG_VID); + data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, but we assume it is always safe to read 6 bits. */ data->vid &= 0x3f; @@ -1377,18 +1374,79 @@ static struct it87_data *it87_update_device(struct device *dev) return data; } +static int __init it87_device_add(unsigned short address, + const struct it87_sio_data *sio_data) +{ + struct resource res = { + .start = address , + .end = address + IT87_EXTENT - 1, + .name = DRVNAME, + .flags = IORESOURCE_IO, + }; + int err; + + pdev = platform_device_alloc(DRVNAME, address); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit; + } + + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + printk(KERN_ERR DRVNAME ": Device resource addition failed " + "(%d)\n", err); + goto exit_device_put; + } + + err = platform_device_add_data(pdev, sio_data, + sizeof(struct it87_sio_data)); + if (err) { + printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + static int __init sm_it87_init(void) { - int res; + int err; + unsigned short isa_address=0; + struct it87_sio_data sio_data; + + err = it87_find(&isa_address, &sio_data); + if (err) + return err; + err = platform_driver_register(&it87_driver); + if (err) + return err; - if ((res = it87_find(&isa_address))) - return res; - return i2c_isa_add_driver(&it87_isa_driver); + err = it87_device_add(isa_address, &sio_data); + if (err){ + platform_driver_unregister(&it87_driver); + return err; + } + + return 0; } static void __exit sm_it87_exit(void) { - i2c_isa_del_driver(&it87_isa_driver); + platform_device_unregister(pdev); + platform_driver_unregister(&it87_driver); } |