starfire: use request_firmware()

Firmware blob is big endian

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 48 insertions, 383 deletions

diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index f54ac23..57fb1f7 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -42,11 +42,11 @@
 #include <linux/mii.h>
 #include <linux/if_vlan.h>
 #include <linux/mm.h>
+#include <linux/firmware.h>
 #include <asm/processor.h>		/* Processor type for cache alignment. */
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#include "starfire_firmware.h"
 /*
  * The current frame processor firmware fails to checksum a fragment
  * of length 1. If and when this is fixed, the #define below can be removed.
@@ -173,6 +173,10 @@ static int full_duplex[MAX_UNITS] = {0, };
 #define skb_first_frag_len(skb)	skb_headlen(skb)
 #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1)
 
+/* Firmware names */
+#define FIRMWARE_RX	"adaptec/starfire_rx.bin"
+#define FIRMWARE_TX	"adaptec/starfire_tx.bin"
+
 /* These identify the driver base version and may not be removed. */
 static char version[] =
 KERN_INFO "starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>\n"
@@ -182,6 +186,8 @@ MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_RX);
+MODULE_FIRMWARE(FIRMWARE_TX);
 
 module_param(max_interrupt_work, int, 0);
 module_param(mtu, int, 0);
@@ -902,9 +908,12 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
 
 static int netdev_open(struct net_device *dev)
 {
+	const struct firmware *fw_rx, *fw_tx;
+	const __be32 *fw_rx_data, *fw_tx_data;
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->base;
 	int i, retval;
+	size_t tx_size, rx_size;
 	size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size;
 
 	/* Do we ever need to reset the chip??? */
@@ -1040,11 +1049,40 @@ static int netdev_open(struct net_device *dev)
 	writel(ETH_P_8021Q, ioaddr + VlanType);
 #endif /* VLAN_SUPPORT */
 
+	retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev);
+	if (retval) {
+		printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
+		       FIRMWARE_RX);
+		return retval;
+	}
+	if (fw_rx->size % 4) {
+		printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
+		       fw_rx->size, FIRMWARE_RX);
+		retval = -EINVAL;
+		goto out_rx;
+	}
+	retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev);
+	if (retval) {
+		printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
+		       FIRMWARE_TX);
+		goto out_rx;
+	}
+	if (fw_tx->size % 4) {
+		printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
+		       fw_tx->size, FIRMWARE_TX);
+		retval = -EINVAL;
+		goto out_tx;
+	}
+	fw_rx_data = (const __be32 *)&fw_rx->data[0];
+	fw_tx_data = (const __be32 *)&fw_tx->data[0];
+	rx_size = fw_rx->size / 4;
+	tx_size = fw_tx->size / 4;
+
 	/* Load Rx/Tx firmware into the frame processors */
-	for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++)
-		writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4);
-	for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++)
-		writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4);
+	for (i = 0; i < rx_size; i++)
+		writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4);
+	for (i = 0; i < tx_size; i++)
+		writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4);
 	if (enable_hw_cksum)
 		/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */
 		writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl);
@@ -1056,7 +1094,11 @@ static int netdev_open(struct net_device *dev)
 		printk(KERN_DEBUG "%s: Done netdev_open().\n",
 		       dev->name);
 
-	return 0;
+out_tx:
+	release_firmware(fw_tx);
+out_rx:
+	release_firmware(fw_rx);
+	return retval;
 }
 
 
diff --git a/drivers/net/starfire_firmware.h b/drivers/net/starfire_firmware.h
deleted file mode 100644
index 0a66852..0000000
--- a/drivers/net/starfire_firmware.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Copyright 2003 Adaptec, Inc.
- *
- * Please read the following license before using the Adaptec Software
- * ("Program"). If you do not agree to the license terms, do not use the
- * Program:
- *
- * You agree to be bound by version 2 of the General Public License ("GPL")
- * dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html.
- * If the link is broken, write to Free Software Foundation, 59 Temple Place,
- * Boston, Massachusetts 02111-1307.
- *
- * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND
- * THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE
- * IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE
- * (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR
- * OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR
- * DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
- *
- */
-
-static const u32 firmware_rx[] = {
-  0x010003dc, 0x00000000,
-  0x04000421, 0x00000086,
-  0x80000015, 0x0000180e,
-  0x81000015, 0x00006664,
-  0x1a0040ab, 0x00000b06,
-  0x14200011, 0x00000000,
-  0x14204022, 0x0000aaaa,
-  0x14204022, 0x00000300,
-  0x14204022, 0x00000000,
-  0x1a0040ab, 0x00000b14,
-  0x14200011, 0x00000000,
-  0x83000015, 0x00000002,
-  0x04000021, 0x00000000,
-  0x00000010, 0x00000000,
-  0x04000421, 0x00000087,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00008015, 0x00000000,
-  0x0000003e, 0x00000000,
-  0x00000010, 0x00000000,
-  0x82000015, 0x00004000,
-  0x009e8050, 0x00000000,
-  0x03008015, 0x00000000,
-  0x86008015, 0x00000000,
-  0x82000015, 0x00008000,
-  0x0100001c, 0x00000000,
-  0x000050a0, 0x0000010c,
-  0x4e20d011, 0x00006008,
-  0x1420d012, 0x00004008,
-  0x0000f090, 0x00007000,
-  0x0000c8b0, 0x00003000,
-  0x00004040, 0x00000000,
-  0x00108015, 0x00000000,
-  0x00a2c150, 0x00004000,
-  0x00a400b0, 0x00000014,
-  0x00000020, 0x00000000,
-  0x2500400d, 0x00002525,
-  0x00047220, 0x00003100,
-  0x00934070, 0x00000000,
-  0x00000020, 0x00000000,
-  0x00924460, 0x00000184,
-  0x2b20c011, 0x00000000,
-  0x0000c420, 0x00000540,
-  0x36014018, 0x0000422d,
-  0x14200011, 0x00000000,
-  0x00924460, 0x00000183,
-  0x3200001f, 0x00000034,
-  0x02ac0015, 0x00000002,
-  0x00a60110, 0x00000008,
-  0x42200011, 0x00000000,
-  0x00924060, 0x00000103,
-  0x0000001e, 0x00000000,
-  0x00000020, 0x00000100,
-  0x0000001e, 0x00000000,
-  0x00924460, 0x00000086,
-  0x00004080, 0x00000000,
-  0x0092c070, 0x00000000,
-  0x00924060, 0x00000100,
-  0x0000c890, 0x00005000,
-  0x00a6c110, 0x00000000,
-  0x00b0c090, 0x00000012,
-  0x021c0015, 0x00000000,
-  0x3200001f, 0x00000034,
-  0x00924460, 0x00000510,
-  0x44210011, 0x00000000,
-  0x42000011, 0x00000000,
-  0x83000015, 0x00000040,
-  0x00924460, 0x00000508,
-  0x45014018, 0x00004545,
-  0x00808050, 0x00000000,
-  0x62208012, 0x00000000,
-  0x82000015, 0x00000800,
-  0x15200011, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x80000015, 0x0000eea4,
-  0x81000015, 0x0000005f,
-  0x00000060, 0x00000000,
-  0x00004120, 0x00000000,
-  0x00004a00, 0x00004000,
-  0x00924460, 0x00000190,
-  0x5601401a, 0x00005956,
-  0x14000011, 0x00000000,
-  0x00934050, 0x00000018,
-  0x00930050, 0x00000018,
-  0x3601403a, 0x0000002d,
-  0x000643a9, 0x00000000,
-  0x0000c420, 0x00000140,
-  0x5601401a, 0x00005956,
-  0x14000011, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x000642a9, 0x00000000,
-  0x00024420, 0x00000183,
-  0x5601401a, 0x00005956,
-  0x82000015, 0x00002000,
-  0x15200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x15200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x15200011, 0x00000000,
-};	/* 104 Rx instructions */
-#define FIRMWARE_RX_SIZE 104
-
-static const u32 firmware_tx[] = {
-  0x010003dc, 0x00000000,
-  0x04000421, 0x00000086,
-  0x80000015, 0x0000180e,
-  0x81000015, 0x00006664,
-  0x1a0040ab, 0x00000b06,
-  0x14200011, 0x00000000,
-  0x14204022, 0x0000aaaa,
-  0x14204022, 0x00000300,
-  0x14204022, 0x00000000,
-  0x1a0040ab, 0x00000b14,
-  0x14200011, 0x00000000,
-  0x83000015, 0x00000002,
-  0x04000021, 0x00000000,
-  0x00000010, 0x00000000,
-  0x04000421, 0x00000087,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00008015, 0x00000000,
-  0x0000003e, 0x00000000,
-  0x00000010, 0x00000000,
-  0x82000015, 0x00004000,
-  0x009e8050, 0x00000000,
-  0x03008015, 0x00000000,
-  0x86008015, 0x00000000,
-  0x82000015, 0x00008000,
-  0x0100001c, 0x00000000,
-  0x000050a0, 0x0000010c,
-  0x4e20d011, 0x00006008,
-  0x1420d012, 0x00004008,
-  0x0000f090, 0x00007000,
-  0x0000c8b0, 0x00003000,
-  0x00004040, 0x00000000,
-  0x00108015, 0x00000000,
-  0x00a2c150, 0x00004000,
-  0x00a400b0, 0x00000014,
-  0x00000020, 0x00000000,
-  0x2500400d, 0x00002525,
-  0x00047220, 0x00003100,
-  0x00934070, 0x00000000,
-  0x00000020, 0x00000000,
-  0x00924460, 0x00000184,
-  0x2b20c011, 0x00000000,
-  0x0000c420, 0x00000540,
-  0x36014018, 0x0000422d,
-  0x14200011, 0x00000000,
-  0x00924460, 0x00000183,
-  0x3200001f, 0x00000034,
-  0x02ac0015, 0x00000002,
-  0x00a60110, 0x00000008,
-  0x42200011, 0x00000000,
-  0x00924060, 0x00000103,
-  0x0000001e, 0x00000000,
-  0x00000020, 0x00000100,
-  0x0000001e, 0x00000000,
-  0x00924460, 0x00000086,
-  0x00004080, 0x00000000,
-  0x0092c070, 0x00000000,
-  0x00924060, 0x00000100,
-  0x0000c890, 0x00005000,
-  0x00a6c110, 0x00000000,
-  0x00b0c090, 0x00000012,
-  0x021c0015, 0x00000000,
-  0x3200001f, 0x00000034,
-  0x00924460, 0x00000510,
-  0x44210011, 0x00000000,
-  0x42000011, 0x00000000,
-  0x83000015, 0x00000040,
-  0x00924460, 0x00000508,
-  0x45014018, 0x00004545,
-  0x00808050, 0x00000000,
-  0x62208012, 0x00000000,
-  0x82000015, 0x00000800,
-  0x15200011, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x80000015, 0x0000eea4,
-  0x81000015, 0x0000005f,
-  0x00000060, 0x00000000,
-  0x00004120, 0x00000000,
-  0x00004a00, 0x00004000,
-  0x00924460, 0x00000190,
-  0x5601401a, 0x00005956,
-  0x14000011, 0x00000000,
-  0x00934050, 0x00000018,
-  0x00930050, 0x00000018,
-  0x3601403a, 0x0000002d,
-  0x000643a9, 0x00000000,
-  0x0000c420, 0x00000140,
-  0x5601401a, 0x00005956,
-  0x14000011, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x000642a9, 0x00000000,
-  0x00024420, 0x00000183,
-  0x5601401a, 0x00005956,
-  0x82000015, 0x00002000,
-  0x15200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x15200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x15200011, 0x00000000,
-};	/* 104 Tx instructions */
-#define FIRMWARE_TX_SIZE 104
-#if 0
-static const u32 firmware_wol[] = {
-  0x010003dc, 0x00000000,
-  0x19000421, 0x00000087,
-  0x80000015, 0x00001a1a,
-  0x81000015, 0x00001a1a,
-  0x1a0040ab, 0x00000b06,
-  0x15200011, 0x00000000,
-  0x15204022, 0x0000aaaa,
-  0x15204022, 0x00000300,
-  0x15204022, 0x00000000,
-  0x1a0040ab, 0x00000b15,
-  0x15200011, 0x00000000,
-  0x83000015, 0x00000002,
-  0x04000021, 0x00000000,
-  0x00000010, 0x00000000,
-  0x04000421, 0x00000087,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00008015, 0x00000000,
-  0x0000003e, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x82000015, 0x00004000,
-  0x82000015, 0x00008000,
-  0x0000000c, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00004080, 0x00000100,
-  0x1f20c011, 0x00001122,
-  0x2720f011, 0x00003011,
-  0x19200071, 0x00000000,
-  0x1a200051, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x1d2040a4, 0x00003344,
-  0x1d2040a2, 0x00005566,
-  0x000040a0, 0x00000100,
-  0x00108050, 0x00000001,
-  0x1a208012, 0x00000006,
-  0x82000015, 0x00008080,
-  0x010003dc, 0x00000000,
-  0x1d2040a4, 0x00002233,
-  0x1d2040a4, 0x00004455,
-  0x2d208011, 0x00000005,
-  0x1d2040a4, 0x00006611,
-  0x00108050, 0x00000001,
-  0x27200011, 0x00000000,
-  0x1d2050a4, 0x00006600,
-  0x82000015, 0x00008080,
-  0x010003dc, 0x00000000,
-  0x00000050, 0x00000000,
-  0x1b200031, 0x00000000,
-  0x0000001e, 0x00000000,
-  0x0000001e, 0x00000000,
-  0x0000001e, 0x00000000,
-  0x0000001e, 0x00000000,
-  0x00924460, 0x00000086,
-  0x00004080, 0x00000000,
-  0x0092c070, 0x00000000,
-  0x00924060, 0x00000100,
-  0x0000c890, 0x00005000,
-  0x00a6c110, 0x00000000,
-  0x00b0c090, 0x00000012,
-  0x021c0015, 0x00000000,
-  0x3200001f, 0x00000034,
-  0x00924460, 0x00000510,
-  0x44210011, 0x00000000,
-  0x42000011, 0x00000000,
-  0x83000015, 0x00000040,
-  0x00924460, 0x00000508,
-  0x476a0012, 0x00000100,
-  0x83000015, 0x00000008,
-  0x16200011, 0x00000000,
-  0x001e8050, 0x00000000,
-  0x001e8050, 0x00000000,
-  0x00808050, 0x00000000,
-  0x03008015, 0x00000000,
-  0x62208012, 0x00000000,
-  0x82000015, 0x00000800,
-  0x16200011, 0x00000000,
-  0x80000015, 0x0000eea4,
-  0x81000015, 0x0000005f,
-  0x00000020, 0x00000000,
-  0x00004120, 0x00000000,
-  0x00004a00, 0x00004000,
-  0x00924460, 0x00000190,
-  0x5c01401a, 0x0000595c,
-  0x15000011, 0x00000000,
-  0x00934050, 0x00000018,
-  0x00930050, 0x00000018,
-  0x3601403a, 0x0000002d,
-  0x00064029, 0x00000000,
-  0x0000c420, 0x00000140,
-  0x5c01401a, 0x0000595c,
-  0x15000011, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00000010, 0x00000000,
-  0x00064029, 0x00000000,
-  0x00024420, 0x00000183,
-  0x5c01401a, 0x0000595c,
-  0x82000015, 0x00002000,
-  0x16200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x16200011, 0x00000000,
-  0x82000015, 0x00000010,
-  0x16200011, 0x00000000,
-};	/* 104 WoL instructions */
-#define FIRMWARE_WOL_SIZE 104
-#endif
diff --git a/drivers/net/starfire_firmware.pl b/drivers/net/starfire_firmware.pl
deleted file mode 100644
index 0c82b80..0000000
--- a/drivers/net/starfire_firmware.pl
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/usr/bin/perl
-
-# This script can be used to generate a new starfire_firmware.h
-# from GFP_RX.DAT and GFP_TX.DAT, files included with the DDK
-# and also with the Novell drivers.
-
-open FW, "GFP_RX.DAT" || die;
-open FWH, ">starfire_firmware.h" || die;
-
-printf(FWH "static u32 firmware_rx[] = {\n");
-$counter = 0;
-while ($foo = <FW>) {
-  chomp;
-  printf(FWH "  0x%s, 0x0000%s,\n", substr($foo, 4, 8), substr($foo, 0, 4));
-  $counter++;
-}
-
-close FW;
-open FW, "GFP_TX.DAT" || die;
-
-printf(FWH "};\t/* %d Rx instructions */\n#define FIRMWARE_RX_SIZE %d\n\nstatic u32 firmware_tx[] = {\n", $counter, $counter);
-$counter = 0;
-while ($foo = <FW>) {
-  chomp;
-  printf(FWH "  0x%s, 0x0000%s,\n", substr($foo, 4, 8), substr($foo, 0, 4));
-  $counter++;
-}
-
-close FW;
-printf(FWH "};\t/* %d Tx instructions */\n#define FIRMWARE_TX_SIZE %d\n", $counter, $counter);
-close(FWH);