sh: Kill off dead bigsur and ec3104 boards.

Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 0 insertions, 139 deletions

diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h
deleted file mode 100644
index 427245f..0000000
--- a/include/asm-sh/bigsur/bigsur.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *
- * Hitachi Big Sur Eval Board support
- *
- * Dustin McIntire (dustin@sensoria.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Derived from Hitachi SH7751 reference manual
- * 
- */
-
-#ifndef _ASM_BIGSUR_H_
-#define _ASM_BIGSUR_H_
-
-#include <asm/irq.h>
-#include <asm/hd64465/hd64465.h>
-
-/* 7751 Internal IRQ's used by external CPLD controller */
-#define BIGSUR_IRQ_LOW	0
-#define BIGSUR_IRQ_NUM  14         /* External CPLD level 1 IRQs */
-#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
-#define BIGSUR_2NDLVL_IRQ_LOW   (HD64465_IRQ_BASE+HD64465_IRQ_NUM)  
-#define BIGSUR_2NDLVL_IRQ_NUM   32 /* Level 2 IRQs = 4 regs * 8 bits */
-#define BIGSUR_2NDLVL_IRQ_HIGH  (BIGSUR_2NDLVL_IRQ_LOW + \
-                                 BIGSUR_2NDLVL_IRQ_NUM)
-
-/* PCI interrupt base number (A_INTA-A_INTD) */
-#define BIGSUR_SH7751_PCI_IRQ_BASE  (BIGSUR_2NDLVL_IRQ_LOW+10)  
-
-/* CPLD registers and external chip addresses */
-#define BIGSUR_HD64464_ADDR	0xB2000000
-#define BIGSUR_DGDR	0xB1FFFE00
-#define BIGSUR_BIDR	0xB1FFFD00
-#define BIGSUR_CSLR	0xB1FFFC00
-#define BIGSUR_SW1R	0xB1FFFB00
-#define BIGSUR_DBGR	0xB1FFFA00
-#define BIGSUR_BDTR	0xB1FFF900
-#define BIGSUR_BDRR	0xB1FFF800
-#define BIGSUR_PPR1	0xB1FFF700
-#define BIGSUR_PPR2	0xB1FFF600
-#define BIGSUR_IDE2	0xB1FFF500
-#define BIGSUR_IDE3	0xB1FFF400
-#define BIGSUR_SPCR	0xB1FFF300
-#define BIGSUR_ETHR	0xB1FE0000
-#define BIGSUR_PPDR	0xB1FDFF00
-#define BIGSUR_ICTL	0xB1FDFE00
-#define BIGSUR_ICMD	0xB1FDFD00
-#define BIGSUR_DMA0	0xB1FDFC00
-#define BIGSUR_DMA1	0xB1FDFB00
-#define BIGSUR_IRQ0	0xB1FDFA00
-#define BIGSUR_IRQ1	0xB1FDF900
-#define BIGSUR_IRQ2	0xB1FDF800
-#define BIGSUR_IRQ3	0xB1FDF700
-#define BIGSUR_IMR0	0xB1FDF600
-#define BIGSUR_IMR1	0xB1FDF500
-#define BIGSUR_IMR2	0xB1FDF400
-#define BIGSUR_IMR3	0xB1FDF300
-#define BIGSUR_IRLMR0	0xB1FDF200
-#define BIGSUR_IRLMR1	0xB1FDF100
-#define BIGSUR_V320USC_ADDR  0xB1000000
-#define BIGSUR_HD64465_ADDR  0xB0000000
-#define BIGSUR_INTERNAL_BASE 0xB0000000
-
-/* SMC ethernet card parameters */
-#define BIGSUR_ETHER_IOPORT		0x220
-
-/* IDE register paramters */
-#define BIGSUR_IDECMD_IOPORT	0x1f0
-#define BIGSUR_IDECTL_IOPORT	0x1f8
-
-/* LED bit position in BIGSUR_CSLR */
-#define BIGSUR_LED  (1<<4)
-
-/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
-#define BIGSUR_LSR0_SIZE    (64*(1<<20)) //64MB
-#define BIGSUR_LSR1_SIZE    (64*(1<<20)) //64MB
-
-#endif /* _ASM_BIGSUR_H_ */
diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h
deleted file mode 100644
index 1470ac8..0000000
--- a/include/asm-sh/bigsur/io.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-sh/bigsur/io.h
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from io_hd64465.h, which bore the message:
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc. 
- * and from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for a Hitachi Big Sur Evaluation Board.
- */
-
-#ifndef _ASM_SH_IO_BIGSUR_H
-#define _ASM_SH_IO_BIGSUR_H
-
-#include <linux/types.h>
-
-extern unsigned long bigsur_isa_port2addr(unsigned long offset);
-extern int bigsur_irq_demux(int irq);
-/* Provision for generic secondary demux step -- used by PCMCIA code */
-extern void bigsur_register_irq_demux(int irq,
-		int (*demux)(int irq, void *dev), void *dev);
-extern void bigsur_unregister_irq_demux(int irq);
-/* Set this variable to 1 to see port traffic */
-extern int bigsur_io_debug;
-/* Map a range of ports to a range of kernel virtual memory. */
-extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift);
-extern void bigsur_port_unmap(u32 baseport, u32 nports);
-
-#endif /* _ASM_SH_IO_BIGSUR_H */
-
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
deleted file mode 100644
index a08fa82..0000000
--- a/include/asm-sh/bigsur/serial.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-sh/bigsur/serial.h
- *
- * Configuration details for Big Sur 16550 based serial ports 
- * i.e. HD64465, PCMCIA, etc.
- */
-
-#ifndef _ASM_SERIAL_BIGSUR_H
-#define _ASM_SERIAL_BIGSUR_H
-#include <asm/hd64465.h>
-
-#define BASE_BAUD (3379200 / 16)
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-
-#define SERIAL_PORT_DFNS                   \
-        /* UART CLK   PORT IRQ     FLAGS        */                      \
-        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ 
-
-/* XXX: This should be moved ino irq.h */
-#define irq_cannonicalize(x) (x)
-
-#endif /* _ASM_SERIAL_BIGSUR_H */