UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 1 insertions, 153 deletions

diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a..47492c9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
  *
  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  */
-
 #ifndef __LINUX_MII_H__
 #define __LINUX_MII_H__
 
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
-#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
-#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/if.h>
+#include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
 
@@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 	return cap;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MII_H__ */