Merge branches 'drivers/macb-gem' and 'drivers/pxa-gpio' into next/drivers

29 files changed, 431 insertions, 235 deletions

diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index e49c36d..bb145e4 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -144,7 +144,7 @@ static inline void unregister_dock_notifier(struct notifier_block *nb)
 {
 }
 static inline int register_hotplug_dock_device(acpi_handle handle,
-					       struct acpi_dock_ops *ops,
+					       const struct acpi_dock_ops *ops,
 					       void *context)
 {
 	return -ENODEV;
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index b67231b..ed73f67 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -470,7 +470,6 @@ typedef u64 acpi_integer;
  */
 #define ACPI_FULL_INITIALIZATION        0x00
 #define ACPI_NO_ADDRESS_SPACE_INIT      0x01
-#define ACPI_NO_HARDWARE_INIT           0x02
 #define ACPI_NO_EVENT_INIT              0x04
 #define ACPI_NO_HANDLER_INIT            0x08
 #define ACPI_NO_ACPI_ENABLE             0x10
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 67055f1..610f6fb 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -329,6 +329,7 @@ extern void acpi_processor_throttling_init(void);
 int acpi_processor_power_init(struct acpi_processor *pr,
 			      struct acpi_device *device);
 int acpi_processor_cst_has_changed(struct acpi_processor *pr);
+int acpi_processor_hotplug(struct acpi_processor *pr);
 int acpi_processor_power_exit(struct acpi_processor *pr,
 			      struct acpi_device *device);
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index cf39949..1f9e951 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -990,7 +990,9 @@ struct drm_minor {
 	struct proc_dir_entry *proc_root;  /**< proc directory entry */
 	struct drm_info_node proc_nodes;
 	struct dentry *debugfs_root;
-	struct drm_info_node debugfs_nodes;
+
+	struct list_head debugfs_list;
+	struct mutex debugfs_lock; /* Protects debugfs_list. */
 
 	struct drm_master *master; /* currently active master for this node */
 	struct list_head master_list;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 0d2f727..93df2d7 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -72,6 +72,7 @@
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
+#define DP_EDP_CONFIGURATION_CAP            0x00d
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e
 
 #define DP_PSR_SUPPORT                      0x070
@@ -159,6 +160,8 @@
 # define DP_CP_IRQ			    (1 << 2)
 # define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
 
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index c4961ea..d30bedf 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -120,11 +120,12 @@ struct drm_mode_crtc {
 	struct drm_mode_modeinfo mode;
 };
 
-#define DRM_MODE_ENCODER_NONE	0
-#define DRM_MODE_ENCODER_DAC	1
-#define DRM_MODE_ENCODER_TMDS	2
-#define DRM_MODE_ENCODER_LVDS	3
-#define DRM_MODE_ENCODER_TVDAC	4
+#define DRM_MODE_ENCODER_NONE	 0
+#define DRM_MODE_ENCODER_DAC	 1
+#define DRM_MODE_ENCODER_TMDS	 2
+#define DRM_MODE_ENCODER_LVDS	 3
+#define DRM_MODE_ENCODER_TVDAC	 4
+#define DRM_MODE_ENCODER_VIRTUAL 5
 
 struct drm_mode_get_encoder {
 	__u32 encoder_id;
@@ -162,6 +163,7 @@ struct drm_mode_get_encoder {
 #define DRM_MODE_CONNECTOR_HDMIB	12
 #define DRM_MODE_CONNECTOR_TV		13
 #define DRM_MODE_CONNECTOR_eDP		14
+#define DRM_MODE_CONNECTOR_VIRTUAL      15
 
 struct drm_mode_get_connector {
 
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
index 874c4d2..1d161cb 100644
--- a/include/drm/exynos_drm.h
+++ b/include/drm/exynos_drm.h
@@ -36,11 +36,13 @@
  *	- this size value would be page-aligned internally.
  * @flags: user request for setting memory type or cache attributes.
  * @handle: returned handle for the object.
+ * @pad: just padding to be 64-bit aligned.
  */
 struct drm_exynos_gem_create {
 	unsigned int size;
 	unsigned int flags;
 	unsigned int handle;
+	unsigned int pad;
 };
 
 /**
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index cd7cd81..bcb0912 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -54,7 +54,7 @@
 #define DRM_VMW_FENCE_EVENT          17
 #define DRM_VMW_PRESENT              18
 #define DRM_VMW_PRESENT_READBACK     19
-
+#define DRM_VMW_UPDATE_LAYOUT        20
 
 /*************************************************************************/
 /**
@@ -552,31 +552,6 @@ struct drm_vmw_get_3d_cap_arg {
 
 /*************************************************************************/
 /**
- * DRM_VMW_UPDATE_LAYOUT - Update layout
- *
- * Updates the preferred modes and connection status for connectors. The
- * command conisits of one drm_vmw_update_layout_arg pointing out a array
- * of num_outputs drm_vmw_rect's.
- */
-
-/**
- * struct drm_vmw_update_layout_arg
- *
- * @num_outputs: number of active
- * @rects: pointer to array of drm_vmw_rect
- *
- * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
- */
-
-struct drm_vmw_update_layout_arg {
-	uint32_t num_outputs;
-	uint32_t pad64;
-	uint64_t rects;
-};
-
-
-/*************************************************************************/
-/**
  * DRM_VMW_FENCE_WAIT
  *
  * Waits for a fence object to signal. The wait is interruptible, so that
@@ -788,4 +763,28 @@ struct drm_vmw_present_readback_arg {
 	 uint64_t clips_ptr;
 	 uint64_t fence_rep;
 };
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the preferred modes and connection status for connectors. The
+ * command consists of one drm_vmw_update_layout_arg pointing to an array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active connectors
+ * @rects: pointer to array of drm_vmw_rect cast to an uint64_t
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+struct drm_vmw_update_layout_arg {
+	uint32_t num_outputs;
+	uint32_t pad64;
+	uint64_t rects;
+};
+
 #endif
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 583baf2..7408af8 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -23,57 +23,62 @@
 struct module;
 
 struct cpuidle_device;
+struct cpuidle_driver;
 
 
 /****************************
  * CPUIDLE DEVICE INTERFACE *
  ****************************/
 
+struct cpuidle_state_usage {
+	void		*driver_data;
+
+	unsigned long long	usage;
+	unsigned long long	time; /* in US */
+};
+
 struct cpuidle_state {
 	char		name[CPUIDLE_NAME_LEN];
 	char		desc[CPUIDLE_DESC_LEN];
-	void		*driver_data;
 
 	unsigned int	flags;
 	unsigned int	exit_latency; /* in US */
 	unsigned int	power_usage; /* in mW */
 	unsigned int	target_residency; /* in US */
 
-	unsigned long long	usage;
-	unsigned long long	time; /* in US */
-
 	int (*enter)	(struct cpuidle_device *dev,
-			 struct cpuidle_state *state);
+			struct cpuidle_driver *drv,
+			int index);
 };
 
 /* Idle State Flags */
 #define CPUIDLE_FLAG_TIME_VALID	(0x01) /* is residency time measurable? */
-#define CPUIDLE_FLAG_IGNORE	(0x100) /* ignore during this idle period */
 
 #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
 
 /**
  * cpuidle_get_statedata - retrieves private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
  */
-static inline void * cpuidle_get_statedata(struct cpuidle_state *state)
+static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
 {
-	return state->driver_data;
+	return st_usage->driver_data;
 }
 
 /**
  * cpuidle_set_statedata - stores private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
  * @data: the private data
  */
 static inline void
-cpuidle_set_statedata(struct cpuidle_state *state, void *data)
+cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
 {
-	state->driver_data = data;
+	st_usage->driver_data = data;
 }
 
 struct cpuidle_state_kobj {
 	struct cpuidle_state *state;
+	struct cpuidle_state_usage *state_usage;
 	struct completion kobj_unregister;
 	struct kobject kobj;
 };
@@ -81,22 +86,17 @@ struct cpuidle_state_kobj {
 struct cpuidle_device {
 	unsigned int		registered:1;
 	unsigned int		enabled:1;
-	unsigned int		power_specified:1;
 	unsigned int		cpu;
 
 	int			last_residency;
 	int			state_count;
-	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
+	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
 	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-	struct cpuidle_state	*last_state;
 
 	struct list_head 	device_list;
 	struct kobject		kobj;
 	struct completion	kobj_unregister;
 	void			*governor_data;
-	struct cpuidle_state	*safe_state;
-
-	int (*prepare)		(struct cpuidle_device *dev);
 };
 
 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
@@ -120,6 +120,11 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev)
 struct cpuidle_driver {
 	char			name[CPUIDLE_NAME_LEN];
 	struct module 		*owner;
+
+	unsigned int		power_specified:1;
+	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
+	int			state_count;
+	int			safe_state_index;
 };
 
 #ifdef CONFIG_CPU_IDLE
@@ -166,11 +171,14 @@ struct cpuidle_governor {
 	struct list_head 	governor_list;
 	unsigned int		rating;
 
-	int  (*enable)		(struct cpuidle_device *dev);
-	void (*disable)		(struct cpuidle_device *dev);
+	int  (*enable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*disable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
 
-	int  (*select)		(struct cpuidle_device *dev);
-	void (*reflect)		(struct cpuidle_device *dev);
+	int  (*select)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*reflect)		(struct cpuidle_device *dev, int index);
 
 	struct module 		*owner;
 };
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb9458..98ce812 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@ struct devfreq_dev_status {
 	unsigned long total_time;
 	unsigned long busy_time;
 	unsigned long current_frequency;
-	void *private_date;
+	void *private_data;
 };
 
 /**
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 45f00b6..de33de1 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1097,10 +1097,12 @@ struct ethtool_ops {
 #define SPEED_1000		1000
 #define SPEED_2500		2500
 #define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
 
 /* Duplex, half or full. */
 #define DUPLEX_HALF		0x00
 #define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
 
 /* Which connector port. */
 #define PORT_TP			0x00
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 08a2fee..aad6bd4 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 static inline
 void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 {
-	return 0;
 }
 
 static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index fae2950..83a9cae 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -1963,6 +1963,21 @@
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
 /*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
  * R76 (0x4C) - Charge Pump (1)
  */
 #define WM8994_CP_ENA                           0x8000  /* CP_ENA */
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 57cc0e6..c4eec22 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -86,24 +86,39 @@ struct nand_bbt_descr {
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none exists */
 #define NAND_BBT_CREATE		0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY	0x00000400
 /* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
+#define NAND_BBT_SCANALLPAGES	0x00000800
 /* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
+#define NAND_BBT_SCANEMPTY	0x00001000
 /* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00001000
+#define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00002000
+#define NAND_BBT_SAVECONTENT	0x00004000
 /* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00004000
+#define NAND_BBT_SCAN2NDPAGE	0x00008000
 /* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE	0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB		0x00400000
+#define NAND_BBT_SCANLASTPAGE	0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH	0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB		0x00040000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT	0x80000000
 
 /* The maximum number of blocks to scan for a bbt */
 #define NAND_BBT_SCAN_MAXBLOCKS	4
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 37be05b..9f5b312 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -32,17 +32,19 @@
 #define MTD_CHAR_MAJOR 90
 #define MTD_BLOCK_MAJOR 31
 
-#define MTD_ERASE_PENDING      	0x01
+#define MTD_ERASE_PENDING	0x01
 #define MTD_ERASING		0x02
 #define MTD_ERASE_SUSPEND	0x04
-#define MTD_ERASE_DONE          0x08
-#define MTD_ERASE_FAILED        0x10
+#define MTD_ERASE_DONE		0x08
+#define MTD_ERASE_FAILED	0x10
 
 #define MTD_FAIL_ADDR_UNKNOWN -1LL
 
-/* If the erase fails, fail_addr might indicate exactly which block failed.  If
-   fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
-   specific to any particular block. */
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
 struct erase_info {
 	struct mtd_info *mtd;
 	uint64_t addr;
@@ -59,26 +61,12 @@ struct erase_info {
 };
 
 struct mtd_erase_region_info {
-	uint64_t offset;			/* At which this region starts, from the beginning of the MTD */
+	uint64_t offset;		/* At which this region starts, from the beginning of the MTD */
 	uint32_t erasesize;		/* For this region */
 	uint32_t numblocks;		/* Number of blocks of erasesize in this region */
 	unsigned long *lockmap;		/* If keeping bitmap of locks */
 };
 
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE:	oob data are placed at the given offset
- * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
- *			which are defined by the ecclayout
- * MTD_OOB_RAW:		mode to read oob and data without doing ECC checking
- */
-typedef enum {
-	MTD_OOB_PLACE,
-	MTD_OOB_AUTO,
-	MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
 /**
  * struct mtd_oob_ops - oob operation operands
  * @mode:	operation mode
@@ -90,7 +78,7 @@ typedef enum {
  * @ooblen:	number of oob bytes to write/read
  * @oobretlen:	number of oob bytes written/read
  * @ooboffs:	offset of oob data in the oob area (only relevant when
- *		mode = MTD_OOB_PLACE)
+ *		mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
  *
@@ -99,7 +87,7 @@ typedef enum {
  * OOB area.
  */
 struct mtd_oob_ops {
-	mtd_oob_mode_t	mode;
+	unsigned int	mode;
 	size_t		len;
 	size_t		retlen;
 	size_t		ooblen;
@@ -173,7 +161,7 @@ struct mtd_info {
 	const char *name;
 	int index;
 
-	/* ecc layout structure pointer - read only ! */
+	/* ECC layout structure pointer - read only! */
 	struct nand_ecclayout *ecclayout;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
@@ -324,10 +312,15 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
 	/* Kernel-side ioctl definitions */
 
 struct mtd_partition;
-
-extern int mtd_device_register(struct mtd_info *master,
-			       const struct mtd_partition *parts,
-			       int nr_parts);
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+			      const char **part_probe_types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *defparts,
+			      int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts)	\
+	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
 extern int mtd_device_unregister(struct mtd_info *master);
 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
 extern int __get_mtd_device(struct mtd_info *mtd);
@@ -356,27 +349,16 @@ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
 
 void mtd_erase_callback(struct erase_info *instr);
 
-/*
- * Debugging macro and defines
- */
-#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */
-#define MTD_DEBUG_LEVEL1	(1)	/* Audible */
-#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */
-#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
-
-#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...)				\
-	do {						\
-		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
-			printk(KERN_INFO args);		\
-	} while(0)
-#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...)				\
-	do {						\
-		if (0)					\
-			printk(KERN_INFO args);		\
-	} while(0)
-
-#endif /* CONFIG_MTD_DEBUG */
+static inline int mtd_is_bitflip(int err) {
+	return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+	return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
 
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c2b9ac4..904131b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -42,10 +42,10 @@ extern void nand_release(struct mtd_info *mtd);
 /* Internal helper for board drivers which need to override command function */
 extern void nand_wait_ready(struct mtd_info *mtd);
 
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
 extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
 extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
 /* The maximum number of NAND chips in an array */
@@ -150,7 +150,7 @@ typedef enum {
 #define NAND_ECC_READ		0
 /* Reset Hardware ECC for write */
 #define NAND_ECC_WRITE		1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
 /* Bit mask for flags passed to do_nand_read_ecc */
@@ -163,7 +163,7 @@ typedef enum {
  */
 /* Chip can not auto increment pages */
 #define NAND_NO_AUTOINCR	0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */
 #define NAND_NO_PADDING		0x00000004
@@ -219,27 +219,15 @@ typedef enum {
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
 
 /* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT	0x00010000
 /* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN	0x00020000
+#define NAND_SKIP_BBTSCAN	0x00010000
 /*
  * This option is defined if the board driver allocates its own buffers
  * (e.g. because it needs them DMA-coherent).
  */
-#define NAND_OWN_BUFFERS	0x00040000
+#define NAND_OWN_BUFFERS	0x00020000
 /* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV	0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB	0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT		0x01000000
+#define NAND_SCAN_SILENT_NODEV	0x00040000
 
 /* Options set by nand scan */
 /* Nand scan has allocated controller struct */
@@ -331,27 +319,29 @@ struct nand_hw_control {
 };
 
 /**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode:	ecc mode
- * @steps:	number of ecc steps per page
- * @size:	data bytes per ecc step
- * @bytes:	ecc bytes per step
- * @total:	total number of ecc bytes per page
- * @prepad:	padding information for syndrome based ecc generators
- * @postpad:	padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode:	ECC mode
+ * @steps:	number of ECC steps per page
+ * @size:	data bytes per ECC step
+ * @bytes:	ECC bytes per step
+ * @total:	total number of ECC bytes per page
+ * @prepad:	padding information for syndrome based ECC generators
+ * @postpad:	padding information for syndrome based ECC generators
  * @layout:	ECC layout control struct pointer
- * @priv:	pointer to private ecc control data
- * @hwctl:	function to control hardware ecc generator. Must only
+ * @priv:	pointer to private ECC control data
+ * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
- * @calculate:	function for ecc calculation or readback from ecc hardware
- * @correct:	function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate:	function for ECC calculation or readback from ECC hardware
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
  * @read_page_raw:	function to read a raw page without ECC
  * @write_page_raw:	function to write a raw page without ECC
- * @read_page:	function to read a page according to the ecc generator
+ * @read_page:	function to read a page according to the ECC generator
  *		requirements.
  * @read_subpage:	function to read parts of the page covered by ECC.
- * @write_page:	function to write a page according to the ecc generator
+ * @write_page:	function to write a page according to the ECC generator
  *		requirements.
+ * @write_oob_raw:	function to write chip OOB data without ECC
+ * @read_oob_raw:	function to read chip OOB data without ECC
  * @read_oob:	function to read chip OOB data
  * @write_oob:	function to write chip OOB data
  */
@@ -380,6 +370,10 @@ struct nand_ecc_ctrl {
 			uint32_t offs, uint32_t len, uint8_t *buf);
 	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf);
+	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page, int sndcmd);
 	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
 			int sndcmd);
 	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -388,8 +382,8 @@ struct nand_ecc_ctrl {
 
 /**
  * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ecc
- * @ecccode:	buffer for ecc read from flash
+ * @ecccalc:	buffer for calculated ECC
+ * @ecccode:	buffer for ECC read from flash
  * @databuf:	buffer for data - dynamically sized
  *
  * Do not change the order of buffers. databuf and oobrbuf must be in
@@ -422,7 +416,7 @@ struct nand_buffers {
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
  *			device ready/busy line. If set to NULL no access to
  *			ready/busy is available and the ready/busy information
  *			is read from the chip status register.
@@ -430,17 +424,17 @@ struct nand_buffers {
  *			commands to the chip.
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
  *			ready.
- * @ecc:		[BOARDSPECIFIC] ecc control ctructure
+ * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
- * @ops:		oob operation operands
  * @erase_cmd:		[INTERN] erase command write function, selectable due
  *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
- * @oob_poi:		poison value buffer
+ * @oob_poi:		"poison value buffer," used for laying out OOB data
+ *			before writing
  * @page_shift:		[INTERN] number of address bits in a page (column
  *			address bits).
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
@@ -449,6 +443,9 @@ struct nand_buffers {
  * @options:		[BOARDSPECIFIC] various chip options. They can partly
  *			be set to inform nand_scan about special functionality.
  *			See the defines for further explanation.
+ * @bbt_options:	[INTERN] bad block specific options. All options used
+ *			here must come from bbm.h. By default, these options
+ *			will be copied to the appropriate nand_bbt_descr's.
  * @badblockpos:	[INTERN] position of the bad block marker in the oob
  *			area.
  * @badblockbits:	[INTERN] number of bits to left-shift the bad block
@@ -464,7 +461,7 @@ struct nand_buffers {
  *			non 0 if ONFI supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
- * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
+ * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -472,9 +469,9 @@ struct nand_buffers {
  * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
  *			bad block scan.
  * @controller:		[REPLACEABLE] a pointer to a hardware controller
- *			structure which is shared among multiple independend
+ *			structure which is shared among multiple independent
  *			devices.
- * @priv:		[OPTIONAL] pointer to private chip date
+ * @priv:		[OPTIONAL] pointer to private chip data
  * @errstat:		[OPTIONAL] hardware specific function to perform
  *			additional error status checks (determine if errors are
  *			correctable).
@@ -509,6 +506,7 @@ struct nand_chip {
 
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 
 	int page_shift;
 	int phys_erase_shift;
@@ -536,8 +534,6 @@ struct nand_chip {
 	struct nand_buffers *buffers;
 	struct nand_hw_control hwcontrol;
 
-	struct mtd_oob_ops ops;
-
 	uint8_t *bbt;
 	struct nand_bbt_descr *bbt_td;
 	struct nand_bbt_descr *bbt_md;
@@ -611,10 +607,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @partitions:		mtd partition list
  * @chip_delay:		R/B delay value in us
  * @options:		Option flags, e.g. 16bit buswidth
- * @ecclayout:		ecc layout info structure
+ * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout:		ECC layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
- * @set_parts:		platform specific function to set partitions
- * @priv:		hardware controller specific settings
  */
 struct platform_nand_chip {
 	int nr_chips;
@@ -624,9 +619,8 @@ struct platform_nand_chip {
 	struct nand_ecclayout *ecclayout;
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 	const char **part_probe_types;
-	void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
-	void *priv;
 };
 
 /* Keep gcc happy */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 52b6f18..4596503 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -184,6 +184,9 @@ struct onenand_chip {
 #define ONENAND_IS_CACHE_PROGRAM(this)					\
 	(this->options & ONENAND_HAS_CACHE_PROGRAM)
 
+#define ONENAND_IS_NOP_1(this)						\
+	(this->options & ONENAND_HAS_NOP_1)
+
 /* Check byte access in OneNAND */
 #define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
 
@@ -195,6 +198,7 @@ struct onenand_chip {
 #define ONENAND_HAS_2PLANE		(0x0004)
 #define ONENAND_HAS_4KB_PAGE		(0x0008)
 #define ONENAND_HAS_CACHE_PROGRAM	(0x0010)
+#define ONENAND_HAS_NOP_1		(0x0020)
 #define ONENAND_SKIP_UNLOCK_CHECK	(0x0100)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
 #define ONENAND_OOBBUF_ALLOC		(0x2000)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3a6f037..2475228 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -24,7 +24,9 @@
  * 	will extend to the end of the master MTD device.
  * offset: absolute starting position within the master MTD device; if
  * 	defined as MTDPART_OFS_APPEND, the partition will start where the
- * 	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ *	after the end of partition.
  * mask_flags: contains flags that have to be masked (removed) from the
  * 	master MTD flag set for the corresponding MTD partition.
  * 	For example, to force a read-only partition, simply adding
@@ -42,12 +44,25 @@ struct mtd_partition {
 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
 };
 
+#define MTDPART_OFS_RETAIN	(-3)
 #define MTDPART_OFS_NXTBLK	(-2)
 #define MTDPART_OFS_APPEND	(-1)
 #define MTDPART_SIZ_FULL	(0)
 
 
 struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+	unsigned long origin;
+	struct device_node *of_node;
+};
+
 
 /*
  * Functions dealing with the various ways of partitioning the space
@@ -57,37 +72,12 @@ struct mtd_part_parser {
 	struct list_head list;
 	struct module *owner;
 	const char *name;
-	int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+			struct mtd_part_parser_data *);
 };
 
 extern int register_mtd_parser(struct mtd_part_parser *parser);
 extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
-				struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-int __devinit of_mtd_parse_partitions(struct device *dev,
-                                      struct device_node *node,
-                                      struct mtd_partition **pparts);
-#else
-static inline int of_mtd_parse_partitions(struct device *dev,
-					  struct device_node *node,
-					  struct mtd_partition **pparts)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static inline int mtd_has_cmdlinepart(void) { return 1; }
-#else
-static inline int mtd_has_cmdlinepart(void) { return 0; }
-#endif
 
 int mtd_is_partition(struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, char *name,
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index e5f21d2..04e0181 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -32,21 +32,4 @@ struct physmap_flash_data {
 	struct mtd_partition	*parts;
 };
 
-/*
- * Board needs to specify the exact mapping during their setup time.
- */
-void physmap_configure(unsigned long addr, unsigned long size,
-		int bankwidth, void (*set_vpp)(struct map_info *, int) );
-
-/*
- * Machines that wish to do flash partition may want to call this function in
- * their setup routine.
- *
- *	physmap_set_partitions(mypartitions, num_parts);
- *
- * Note that one can always override this hard-coded partition with
- * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
- */
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
-
 #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3fdf251..172ba70 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2405,6 +2405,8 @@
 
 #define PCI_VENDOR_ID_AZWAVE		0x1a3b
 
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 3605e94..04c0110 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else
 
+struct pinctrl_dev;
 
 /* Sufficiently stupid default function when pinctrl is not in use */
 static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 0000000..e7c748f
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0efa1f1..369273a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -67,6 +67,7 @@ enum {
 	SCIx_IRDA_REGTYPE,
 	SCIx_SCIFA_REGTYPE,
 	SCIx_SCIFB_REGTYPE,
+	SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH3_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf186..a20831c 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,7 +52,6 @@ struct clk {
 
 	unsigned long		arch_flags;
 	void			*priv;
-	struct dentry		*dentry;
 	struct clk_mapping	*mapping;
 	struct cpufreq_frequency_table *freq_table;
 	unsigned int		nr_freqs;
@@ -94,6 +93,9 @@ int clk_rate_table_find(struct clk *clk,
 long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
 			      unsigned int div_max, unsigned long rate);
 
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate);
+
 long clk_round_parent(struct clk *clk, unsigned long target,
 		      unsigned long *best_freq, unsigned long *parent_freq,
 		      unsigned int div_min, unsigned int div_max);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index bc8c920..8446789 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,4 +104,80 @@ struct pinmux_info {
 int register_pinmux(struct pinmux_info *pip);
 int unregister_pinmux(struct pinmux_info *pip);
 
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
+	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
+	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
+	PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+	PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx),	\
+	PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx),	\
+	PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx),	\
+	PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx),	\
+	PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str)	CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL()	CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,			\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)		\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,		\
+	0, 0, 0, 0,			\
+	0, 0, (in_pd), 0,		\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)							\
+	{								\
+		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,		\
+				PORT##nr##_FN2, PORT##nr##_FN3,		\
+				PORT##nr##_FN4, PORT##nr##_FN5,		\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
 #endif /* __SH_PFC_H */
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 2f7d45b..1a7e1d2 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -45,6 +45,51 @@ struct mtd_oob_buf64 {
 	__u64 usr_ptr;
 };
 
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB:	OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB:	OOB data are automatically placed at the free areas
+ *			which are defined by the internal ecclayout
+ * @MTD_OPS_RAW:	data are transferred as-is, with no error correction;
+ *			this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+	MTD_OPS_PLACE_OOB = 0,
+	MTD_OPS_AUTO_OOB = 1,
+	MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start:	start address
+ * @len:	length of data buffer
+ * @ooblen:	length of OOB buffer
+ * @usr_data:	user-provided data buffer
+ * @usr_oob:	user-provided OOB buffer
+ * @mode:	MTD mode (see "MTD operation modes")
+ * @padding:	reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+	__u64 start;
+	__u64 len;
+	__u64 ooblen;
+	__u64 usr_data;
+	__u64 usr_oob;
+	__u8 mode;
+	__u8 padding[7];
+};
+
 #define MTD_ABSENT		0
 #define MTD_RAM			1
 #define MTD_ROM			2
@@ -59,13 +104,13 @@ struct mtd_oob_buf64 {
 #define MTD_NO_ERASE		0x1000	/* No erase necessary */
 #define MTD_POWERUP_LOCK	0x2000	/* Always locked after reset */
 
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
 #define MTD_CAP_ROM		0
 #define MTD_CAP_RAM		(MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
 #define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
 #define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
 
-/* ECC byte placement */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
 #define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
 #define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
 #define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
@@ -80,21 +125,18 @@ struct mtd_oob_buf64 {
 struct mtd_info_user {
 	__u8 type;
 	__u32 flags;
-	__u32 size;	 // Total size of the MTD
+	__u32 size;	/* Total size of the MTD */
 	__u32 erasesize;
 	__u32 writesize;
-	__u32 oobsize;   // Amount of OOB data per block (e.g. 16)
-	/* The below two fields are obsolete and broken, do not use them
-	 * (TODO: remove at some point) */
-	__u32 ecctype;
-	__u32 eccsize;
+	__u32 oobsize;	/* Amount of OOB data per block (e.g. 16) */
+	__u64 padding;	/* Old obsolete field; do not use */
 };
 
 struct region_info_user {
 	__u32 offset;		/* At which this region starts,
-					 * from the beginning of the MTD */
-	__u32 erasesize;		/* For this region */
-	__u32 numblocks;		/* Number of blocks in this region */
+				 * from the beginning of the MTD */
+	__u32 erasesize;	/* For this region */
+	__u32 numblocks;	/* Number of blocks in this region */
 	__u32 regionindex;
 };
 
@@ -104,29 +146,61 @@ struct otp_info {
 	__u32 locked;
 };
 
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL           _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
 #define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
 #define MEMERASE		_IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
 #define MEMWRITEOOB		_IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
 #define MEMREADOOB		_IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
 #define MEMLOCK			_IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
 #define MEMUNLOCK		_IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
 #define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
 #define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
-#define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
 #define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
 #define MEMGETBADBLOCK		_IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
 #define MEMSETBADBLOCK		_IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
 #define OTPSELECT		_IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
 #define OTPGETREGIONCOUNT	_IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
 #define OTPGETREGIONINFO	_IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
 #define OTPLOCK			_IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
 #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
 #define MTDFILEMODE		_IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
 #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
 #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
 #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
 #define MEMISLOCKED		_IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req")
+ */
+#define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
 
 /*
  * Obsolete legacy interface. Keep it in order not to break userspace
@@ -177,13 +251,27 @@ struct mtd_ecc_stats {
 };
 
 /*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL:	OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY:	OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER:	OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW:		OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
  */
 enum mtd_file_modes {
-	MTD_MODE_NORMAL = MTD_OTP_OFF,
-	MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
-	MTD_MODE_OTP_USER = MTD_OTP_USER,
-	MTD_MODE_RAW,
+	MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+	MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+	MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+	MTD_FILE_MODE_RAW,
 };
 
 #endif /* __MTD_ABI_H__ */
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index d5eee20..e2e3eca 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -211,6 +211,7 @@ struct rfcomm_dlc {
 #define RFCOMM_AUTH_ACCEPT  6
 #define RFCOMM_AUTH_REJECT  7
 #define RFCOMM_DEFER_SETUP  8
+#define RFCOMM_ENC_DROP     9
 
 /* Scheduling flags and events */
 #define RFCOMM_SCHED_WAKEUP 31
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index dc1123a..72eddd1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3567,8 +3567,9 @@ rate_lowest_index(struct ieee80211_supported_band *sband,
 			return i;
 
 	/* warn when we cannot find a rate. */
-	WARN_ON(1);
+	WARN_ON_ONCE(1);
 
+	/* and return 0 (the lowest index) */
 	return 0;
 }
 
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 98c1854..cb1f350 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -192,8 +192,15 @@ enum {
  *    NLA_NUL_STRING       Maximum length of string (excluding NUL)
  *    NLA_FLAG             Unused
  *    NLA_BINARY           Maximum length of attribute payload
- *    NLA_NESTED_COMPAT    Exact length of structure payload
- *    All other            Exact length of attribute payload
+ *    NLA_NESTED           Don't use `len' field -- length verification is
+ *                         done by checking len of nested header (or empty)
+ *    NLA_NESTED_COMPAT    Minimum length of structure payload
+ *    NLA_U8, NLA_U16,
+ *    NLA_U32, NLA_U64,
+ *    NLA_MSECS            Leaving the length field zero will verify the
+ *                         given type fits, using it verifies minimum length
+ *                         just like "All other"
+ *    All other            Minimum length of attribute payload
  *
  * Example:
  * static const struct nla_policy my_policy[ATTR_MAX+1] = {