Merge branch 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
  kdb,debug_core: Allow the debug core to receive a panic notification
  MAINTAINERS: update kgdb, kdb, and debug_core info
  debug_core,kdb: Allow the debug core to process a recursive debug entry
  printk,kdb: capture printk() when in kdb shell
  kgdboc,kdb: Allow kdb to work on a non open console port
  kgdb: Add the ability to schedule a breakpoint via a tasklet
  mips,kgdb: kdb low level trap catch and stack trace
  powerpc,kgdb: Introduce low level trap catching
  x86,kgdb: Add low level debug hook
  kgdb: remove post_primary_code references
  kgdb,docs: Update the kgdb docs to include kdb
  kgdboc,keyboard: Keyboard driver for kdb with kgdb
  kgdb: gdb "monitor" -> kdb passthrough
  sparc,sunzilog: Add console polling support for sunzilog serial driver
  sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
  kgdb,8250,pl011: Return immediately from console poll
  kgdb: core changes to support kdb
  kdb: core for kgdb back end (2 of 2)
  kdb: core for kgdb back end (1 of 2)
  kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
  ...

22 files changed, 8285 insertions, 1767 deletions

diff --git a/kernel/Makefile b/kernel/Makefile
index 149e18e..057472f 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -75,7 +75,7 @@ obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
 obj-$(CONFIG_GCOV_KERNEL) += gcov/
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_KGDB) += debug/
 obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
diff --git a/kernel/debug/Makefile b/kernel/debug/Makefile
new file mode 100644
index 0000000..a85edc3
--- /dev/null
+++ b/kernel/debug/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel debugger
+#
+
+obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o
+obj-$(CONFIG_KGDB_KDB) += kdb/
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
new file mode 100644
index 0000000..64b5588
--- /dev/null
+++ b/kernel/debug/debug_core.c
@@ -0,0 +1,967 @@
+/*
+ * Kernel Debug Core
+ *
+ * Maintainer: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002-2004 Timesys Corporation
+ * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
+ * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2005-2009 Wind River Systems, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * Contributors at various stages not listed above:
+ *  Jason Wessel ( jason.wessel@windriver.com )
+ *  George Anzinger <george@mvista.com>
+ *  Anurekh Saxena (anurekh.saxena@timesys.com)
+ *  Lake Stevens Instrument Division (Glenn Engel)
+ *  Jim Kingdon, Cygnus Support.
+ *
+ * Original KGDB stub: David Grothe <dave@gcom.com>,
+ * Tigran Aivazian <tigran@sco.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#include <linux/pid_namespace.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/console.h>
+#include <linux/threads.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/sysrq.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/pid.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+#include "debug_core.h"
+
+static int kgdb_break_asap;
+
+struct debuggerinfo_struct kgdb_info[NR_CPUS];
+
+/**
+ * kgdb_connected - Is a host GDB connected to us?
+ */
+int				kgdb_connected;
+EXPORT_SYMBOL_GPL(kgdb_connected);
+
+/* All the KGDB handlers are installed */
+int			kgdb_io_module_registered;
+
+/* Guard for recursive entry */
+static int			exception_level;
+
+struct kgdb_io		*dbg_io_ops;
+static DEFINE_SPINLOCK(kgdb_registration_lock);
+
+/* kgdb console driver is loaded */
+static int kgdb_con_registered;
+/* determine if kgdb console output should be used */
+static int kgdb_use_con;
+/* Next cpu to become the master debug core */
+int dbg_switch_cpu;
+
+/* Use kdb or gdbserver mode */
+int dbg_kdb_mode = 1;
+
+static int __init opt_kgdb_con(char *str)
+{
+	kgdb_use_con = 1;
+	return 0;
+}
+
+early_param("kgdbcon", opt_kgdb_con);
+
+module_param(kgdb_use_con, int, 0644);
+
+/*
+ * Holds information about breakpoints in a kernel. These breakpoints are
+ * added and removed by gdb.
+ */
+static struct kgdb_bkpt		kgdb_break[KGDB_MAX_BREAKPOINTS] = {
+	[0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED }
+};
+
+/*
+ * The CPU# of the active CPU, or -1 if none:
+ */
+atomic_t			kgdb_active = ATOMIC_INIT(-1);
+EXPORT_SYMBOL_GPL(kgdb_active);
+
+/*
+ * We use NR_CPUs not PERCPU, in case kgdb is used to debug early
+ * bootup code (which might not have percpu set up yet):
+ */
+static atomic_t			passive_cpu_wait[NR_CPUS];
+static atomic_t			cpu_in_kgdb[NR_CPUS];
+static atomic_t			kgdb_break_tasklet_var;
+atomic_t			kgdb_setting_breakpoint;
+
+struct task_struct		*kgdb_usethread;
+struct task_struct		*kgdb_contthread;
+
+int				kgdb_single_step;
+static pid_t			kgdb_sstep_pid;
+
+/* to keep track of the CPU which is doing the single stepping*/
+atomic_t			kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
+
+/*
+ * If you are debugging a problem where roundup (the collection of
+ * all other CPUs) is a problem [this should be extremely rare],
+ * then use the nokgdbroundup option to avoid roundup. In that case
+ * the other CPUs might interfere with your debugging context, so
+ * use this with care:
+ */
+static int kgdb_do_roundup = 1;
+
+static int __init opt_nokgdbroundup(char *str)
+{
+	kgdb_do_roundup = 0;
+
+	return 0;
+}
+
+early_param("nokgdbroundup", opt_nokgdbroundup);
+
+/*
+ * Finally, some KGDB code :-)
+ */
+
+/*
+ * Weak aliases for breakpoint management,
+ * can be overriden by architectures when needed:
+ */
+int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
+{
+	int err;
+
+	err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE);
+	if (err)
+		return err;
+
+	return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
+				  BREAK_INSTR_SIZE);
+}
+
+int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
+{
+	return probe_kernel_write((char *)addr,
+				  (char *)bundle, BREAK_INSTR_SIZE);
+}
+
+int __weak kgdb_validate_break_address(unsigned long addr)
+{
+	char tmp_variable[BREAK_INSTR_SIZE];
+	int err;
+	/* Validate setting the breakpoint and then removing it.  In the
+	 * remove fails, the kernel needs to emit a bad message because we
+	 * are deep trouble not being able to put things back the way we
+	 * found them.
+	 */
+	err = kgdb_arch_set_breakpoint(addr, tmp_variable);
+	if (err)
+		return err;
+	err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
+	if (err)
+		printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
+		   "memory destroyed at: %lx", addr);
+	return err;
+}
+
+unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+int __weak kgdb_arch_init(void)
+{
+	return 0;
+}
+
+int __weak kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+	return 0;
+}
+
+/**
+ *	kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
+ *	@regs: Current &struct pt_regs.
+ *
+ *	This function will be called if the particular architecture must
+ *	disable hardware debugging while it is processing gdb packets or
+ *	handling exception.
+ */
+void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+}
+
+/*
+ * Some architectures need cache flushes when we set/clear a
+ * breakpoint:
+ */
+static void kgdb_flush_swbreak_addr(unsigned long addr)
+{
+	if (!CACHE_FLUSH_IS_SAFE)
+		return;
+
+	if (current->mm && current->mm->mmap_cache) {
+		flush_cache_range(current->mm->mmap_cache,
+				  addr, addr + BREAK_INSTR_SIZE);
+	}
+	/* Force flush instruction cache if it was outside the mm */
+	flush_icache_range(addr, addr + BREAK_INSTR_SIZE);
+}
+
+/*
+ * SW breakpoint management:
+ */
+int dbg_activate_sw_breakpoints(void)
+{
+	unsigned long addr;
+	int error;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state != BP_SET)
+			continue;
+
+		addr = kgdb_break[i].bpt_addr;
+		error = kgdb_arch_set_breakpoint(addr,
+				kgdb_break[i].saved_instr);
+		if (error) {
+			ret = error;
+			printk(KERN_INFO "KGDB: BP install failed: %lx", addr);
+			continue;
+		}
+
+		kgdb_flush_swbreak_addr(addr);
+		kgdb_break[i].state = BP_ACTIVE;
+	}
+	return ret;
+}
+
+int dbg_set_sw_break(unsigned long addr)
+{
+	int err = kgdb_validate_break_address(addr);
+	int breakno = -1;
+	int i;
+
+	if (err)
+		return err;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if ((kgdb_break[i].state == BP_SET) &&
+					(kgdb_break[i].bpt_addr == addr))
+			return -EEXIST;
+	}
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state == BP_REMOVED &&
+					kgdb_break[i].bpt_addr == addr) {
+			breakno = i;
+			break;
+		}
+	}
+
+	if (breakno == -1) {
+		for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+			if (kgdb_break[i].state == BP_UNDEFINED) {
+				breakno = i;
+				break;
+			}
+		}
+	}
+
+	if (breakno == -1)
+		return -E2BIG;
+
+	kgdb_break[breakno].state = BP_SET;
+	kgdb_break[breakno].type = BP_BREAKPOINT;
+	kgdb_break[breakno].bpt_addr = addr;
+
+	return 0;
+}
+
+int dbg_deactivate_sw_breakpoints(void)
+{
+	unsigned long addr;
+	int error;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state != BP_ACTIVE)
+			continue;
+		addr = kgdb_break[i].bpt_addr;
+		error = kgdb_arch_remove_breakpoint(addr,
+					kgdb_break[i].saved_instr);
+		if (error) {
+			printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr);
+			ret = error;
+		}
+
+		kgdb_flush_swbreak_addr(addr);
+		kgdb_break[i].state = BP_SET;
+	}
+	return ret;
+}
+
+int dbg_remove_sw_break(unsigned long addr)
+{
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if ((kgdb_break[i].state == BP_SET) &&
+				(kgdb_break[i].bpt_addr == addr)) {
+			kgdb_break[i].state = BP_REMOVED;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+int kgdb_isremovedbreak(unsigned long addr)
+{
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if ((kgdb_break[i].state == BP_REMOVED) &&
+					(kgdb_break[i].bpt_addr == addr))
+			return 1;
+	}
+	return 0;
+}
+
+int dbg_remove_all_break(void)
+{
+	unsigned long addr;
+	int error;
+	int i;
+
+	/* Clear memory breakpoints. */
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state != BP_ACTIVE)
+			goto setundefined;
+		addr = kgdb_break[i].bpt_addr;
+		error = kgdb_arch_remove_breakpoint(addr,
+				kgdb_break[i].saved_instr);
+		if (error)
+			printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
+			   addr);
+setundefined:
+		kgdb_break[i].state = BP_UNDEFINED;
+	}
+
+	/* Clear hardware breakpoints. */
+	if (arch_kgdb_ops.remove_all_hw_break)
+		arch_kgdb_ops.remove_all_hw_break();
+
+	return 0;
+}
+
+/*
+ * Return true if there is a valid kgdb I/O module.  Also if no
+ * debugger is attached a message can be printed to the console about
+ * waiting for the debugger to attach.
+ *
+ * The print_wait argument is only to be true when called from inside
+ * the core kgdb_handle_exception, because it will wait for the
+ * debugger to attach.
+ */
+static int kgdb_io_ready(int print_wait)
+{
+	if (!dbg_io_ops)
+		return 0;
+	if (kgdb_connected)
+		return 1;
+	if (atomic_read(&kgdb_setting_breakpoint))
+		return 1;
+	if (print_wait) {
+#ifdef CONFIG_KGDB_KDB
+		if (!dbg_kdb_mode)
+			printk(KERN_CRIT "KGDB: waiting... or $3#33 for KDB\n");
+#else
+		printk(KERN_CRIT "KGDB: Waiting for remote debugger\n");
+#endif
+	}
+	return 1;
+}
+
+static int kgdb_reenter_check(struct kgdb_state *ks)
+{
+	unsigned long addr;
+
+	if (atomic_read(&kgdb_active) != raw_smp_processor_id())
+		return 0;
+
+	/* Panic on recursive debugger calls: */
+	exception_level++;
+	addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs);
+	dbg_deactivate_sw_breakpoints();
+
+	/*
+	 * If the break point removed ok at the place exception
+	 * occurred, try to recover and print a warning to the end
+	 * user because the user planted a breakpoint in a place that
+	 * KGDB needs in order to function.
+	 */
+	if (dbg_remove_sw_break(addr) == 0) {
+		exception_level = 0;
+		kgdb_skipexception(ks->ex_vector, ks->linux_regs);
+		dbg_activate_sw_breakpoints();
+		printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
+			addr);
+		WARN_ON_ONCE(1);
+
+		return 1;
+	}
+	dbg_remove_all_break();
+	kgdb_skipexception(ks->ex_vector, ks->linux_regs);
+
+	if (exception_level > 1) {
+		dump_stack();
+		panic("Recursive entry to debugger");
+	}
+
+	printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n");
+#ifdef CONFIG_KGDB_KDB
+	/* Allow kdb to debug itself one level */
+	return 0;
+#endif
+	dump_stack();
+	panic("Recursive entry to debugger");
+
+	return 1;
+}
+
+static void dbg_cpu_switch(int cpu, int next_cpu)
+{
+	/* Mark the cpu we are switching away from as a slave when it
+	 * holds the kgdb_active token.  This must be done so that the
+	 * that all the cpus wait in for the debug core will not enter
+	 * again as the master. */
+	if (cpu == atomic_read(&kgdb_active)) {
+		kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE;
+		kgdb_info[cpu].exception_state &= ~DCPU_WANT_MASTER;
+	}
+	kgdb_info[next_cpu].exception_state |= DCPU_NEXT_MASTER;
+}
+
+static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs)
+{
+	unsigned long flags;
+	int sstep_tries = 100;
+	int error;
+	int i, cpu;
+	int trace_on = 0;
+acquirelock:
+	/*
+	 * Interrupts will be restored by the 'trap return' code, except when
+	 * single stepping.
+	 */
+	local_irq_save(flags);
+
+	cpu = ks->cpu;
+	kgdb_info[cpu].debuggerinfo = regs;
+	kgdb_info[cpu].task = current;
+	kgdb_info[cpu].ret_state = 0;
+	kgdb_info[cpu].irq_depth = hardirq_count() >> HARDIRQ_SHIFT;
+	/*
+	 * Make sure the above info reaches the primary CPU before
+	 * our cpu_in_kgdb[] flag setting does:
+	 */
+	atomic_inc(&cpu_in_kgdb[cpu]);
+
+	if (exception_level == 1)
+		goto cpu_master_loop;
+
+	/*
+	 * CPU will loop if it is a slave or request to become a kgdb
+	 * master cpu and acquire the kgdb_active lock:
+	 */
+	while (1) {
+cpu_loop:
+		if (kgdb_info[cpu].exception_state & DCPU_NEXT_MASTER) {
+			kgdb_info[cpu].exception_state &= ~DCPU_NEXT_MASTER;
+			goto cpu_master_loop;
+		} else if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) {
+			if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu)
+				break;
+		} else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) {
+			if (!atomic_read(&passive_cpu_wait[cpu]))
+				goto return_normal;
+		} else {
+return_normal:
+			/* Return to normal operation by executing any
+			 * hw breakpoint fixup.
+			 */
+			if (arch_kgdb_ops.correct_hw_break)
+				arch_kgdb_ops.correct_hw_break();
+			if (trace_on)
+				tracing_on();
+			atomic_dec(&cpu_in_kgdb[cpu]);
+			touch_softlockup_watchdog_sync();
+			clocksource_touch_watchdog();
+			local_irq_restore(flags);
+			return 0;
+		}
+		cpu_relax();
+	}
+
+	/*
+	 * For single stepping, try to only enter on the processor
+	 * that was single stepping.  To gaurd against a deadlock, the
+	 * kernel will only try for the value of sstep_tries before
+	 * giving up and continuing on.
+	 */
+	if (atomic_read(&kgdb_cpu_doing_single_step) != -1 &&
+	    (kgdb_info[cpu].task &&
+	     kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) {
+		atomic_set(&kgdb_active, -1);
+		touch_softlockup_watchdog_sync();
+		clocksource_touch_watchdog();
+		local_irq_restore(flags);
+
+		goto acquirelock;
+	}
+
+	if (!kgdb_io_ready(1)) {
+		kgdb_info[cpu].ret_state = 1;
+		goto kgdb_restore; /* No I/O connection, resume the system */
+	}
+
+	/*
+	 * Don't enter if we have hit a removed breakpoint.
+	 */
+	if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
+		goto kgdb_restore;
+
+	/* Call the I/O driver's pre_exception routine */
+	if (dbg_io_ops->pre_exception)
+		dbg_io_ops->pre_exception();
+
+	kgdb_disable_hw_debug(ks->linux_regs);
+
+	/*
+	 * Get the passive CPU lock which will hold all the non-primary
+	 * CPU in a spin state while the debugger is active
+	 */
+	if (!kgdb_single_step) {
+		for (i = 0; i < NR_CPUS; i++)
+			atomic_inc(&passive_cpu_wait[i]);
+	}
+
+#ifdef CONFIG_SMP
+	/* Signal the other CPUs to enter kgdb_wait() */
+	if ((!kgdb_single_step) && kgdb_do_roundup)
+		kgdb_roundup_cpus(flags);
+#endif
+
+	/*
+	 * Wait for the other CPUs to be notified and be waiting for us:
+	 */
+	for_each_online_cpu(i) {
+		while (kgdb_do_roundup && !atomic_read(&cpu_in_kgdb[i]))
+			cpu_relax();
+	}
+
+	/*
+	 * At this point the primary processor is completely
+	 * in the debugger and all secondary CPUs are quiescent
+	 */
+	dbg_deactivate_sw_breakpoints();
+	kgdb_single_step = 0;
+	kgdb_contthread = current;
+	exception_level = 0;
+	trace_on = tracing_is_on();
+	if (trace_on)
+		tracing_off();
+
+	while (1) {
+cpu_master_loop:
+		if (dbg_kdb_mode) {
+			kgdb_connected = 1;
+			error = kdb_stub(ks);
+		} else {
+			error = gdb_serial_stub(ks);
+		}
+
+		if (error == DBG_PASS_EVENT) {
+			dbg_kdb_mode = !dbg_kdb_mode;
+			kgdb_connected = 0;
+		} else if (error == DBG_SWITCH_CPU_EVENT) {
+			dbg_cpu_switch(cpu, dbg_switch_cpu);
+			goto cpu_loop;
+		} else {
+			kgdb_info[cpu].ret_state = error;
+			break;
+		}
+	}
+
+	/* Call the I/O driver's post_exception routine */
+	if (dbg_io_ops->post_exception)
+		dbg_io_ops->post_exception();
+
+	atomic_dec(&cpu_in_kgdb[ks->cpu]);
+
+	if (!kgdb_single_step) {
+		for (i = NR_CPUS-1; i >= 0; i--)
+			atomic_dec(&passive_cpu_wait[i]);
+		/*
+		 * Wait till all the CPUs have quit from the debugger,
+		 * but allow a CPU that hit an exception and is
+		 * waiting to become the master to remain in the debug
+		 * core.
+		 */
+		for_each_online_cpu(i) {
+			while (kgdb_do_roundup &&
+			       atomic_read(&cpu_in_kgdb[i]) &&
+			       !(kgdb_info[i].exception_state &
+				 DCPU_WANT_MASTER))
+				cpu_relax();
+		}
+	}
+
+kgdb_restore:
+	if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
+		int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step);
+		if (kgdb_info[sstep_cpu].task)
+			kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid;
+		else
+			kgdb_sstep_pid = 0;
+	}
+	if (trace_on)
+		tracing_on();
+	/* Free kgdb_active */
+	atomic_set(&kgdb_active, -1);
+	touch_softlockup_watchdog_sync();
+	clocksource_touch_watchdog();
+	local_irq_restore(flags);
+
+	return kgdb_info[cpu].ret_state;
+}
+
+/*
+ * kgdb_handle_exception() - main entry point from a kernel exception
+ *
+ * Locking hierarchy:
+ *	interface locks, if any (begin_session)
+ *	kgdb lock (kgdb_active)
+ */
+int
+kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+{
+	struct kgdb_state kgdb_var;
+	struct kgdb_state *ks = &kgdb_var;
+	int ret;
+
+	ks->cpu			= raw_smp_processor_id();
+	ks->ex_vector		= evector;
+	ks->signo		= signo;
+	ks->err_code		= ecode;
+	ks->kgdb_usethreadid	= 0;
+	ks->linux_regs		= regs;
+
+	if (kgdb_reenter_check(ks))
+		return 0; /* Ouch, double exception ! */
+	kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER;
+	ret = kgdb_cpu_enter(ks, regs);
+	kgdb_info[ks->cpu].exception_state &= ~(DCPU_WANT_MASTER |
+						DCPU_IS_SLAVE);
+	return ret;
+}
+
+int kgdb_nmicallback(int cpu, void *regs)
+{
+#ifdef CONFIG_SMP
+	struct kgdb_state kgdb_var;
+	struct kgdb_state *ks = &kgdb_var;
+
+	memset(ks, 0, sizeof(struct kgdb_state));
+	ks->cpu			= cpu;
+	ks->linux_regs		= regs;
+
+	if (!atomic_read(&cpu_in_kgdb[cpu]) &&
+	    atomic_read(&kgdb_active) != -1 &&
+	    atomic_read(&kgdb_active) != cpu) {
+		kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE;
+		kgdb_cpu_enter(ks, regs);
+		kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE;
+		return 0;
+	}
+#endif
+	return 1;
+}
+
+static void kgdb_console_write(struct console *co, const char *s,
+   unsigned count)
+{
+	unsigned long flags;
+
+	/* If we're debugging, or KGDB has not connected, don't try
+	 * and print. */
+	if (!kgdb_connected || atomic_read(&kgdb_active) != -1 || dbg_kdb_mode)
+		return;
+
+	local_irq_save(flags);
+	gdbstub_msg_write(s, count);
+	local_irq_restore(flags);
+}
+
+static struct console kgdbcons = {
+	.name		= "kgdb",
+	.write		= kgdb_console_write,
+	.flags		= CON_PRINTBUFFER | CON_ENABLED,
+	.index		= -1,
+};
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_handle_dbg(int key, struct tty_struct *tty)
+{
+	if (!dbg_io_ops) {
+		printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
+		return;
+	}
+	if (!kgdb_connected) {
+#ifdef CONFIG_KGDB_KDB
+		if (!dbg_kdb_mode)
+			printk(KERN_CRIT "KGDB or $3#33 for KDB\n");
+#else
+		printk(KERN_CRIT "Entering KGDB\n");
+#endif
+	}
+
+	kgdb_breakpoint();
+}
+
+static struct sysrq_key_op sysrq_dbg_op = {
+	.handler	= sysrq_handle_dbg,
+	.help_msg	= "debug(G)",
+	.action_msg	= "DEBUG",
+};
+#endif
+
+static int kgdb_panic_event(struct notifier_block *self,
+			    unsigned long val,
+			    void *data)
+{
+	if (dbg_kdb_mode)
+		kdb_printf("PANIC: %s\n", (char *)data);
+	kgdb_breakpoint();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block kgdb_panic_event_nb = {
+       .notifier_call	= kgdb_panic_event,
+       .priority	= INT_MAX,
+};
+
+static void kgdb_register_callbacks(void)
+{
+	if (!kgdb_io_module_registered) {
+		kgdb_io_module_registered = 1;
+		kgdb_arch_init();
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &kgdb_panic_event_nb);
+#ifdef CONFIG_MAGIC_SYSRQ
+		register_sysrq_key('g', &sysrq_dbg_op);
+#endif
+		if (kgdb_use_con && !kgdb_con_registered) {
+			register_console(&kgdbcons);
+			kgdb_con_registered = 1;
+		}
+	}
+}
+
+static void kgdb_unregister_callbacks(void)
+{
+	/*
+	 * When this routine is called KGDB should unregister from the
+	 * panic handler and clean up, making sure it is not handling any
+	 * break exceptions at the time.
+	 */
+	if (kgdb_io_module_registered) {
+		kgdb_io_module_registered = 0;
+		atomic_notifier_chain_unregister(&panic_notifier_list,
+					       &kgdb_panic_event_nb);
+		kgdb_arch_exit();
+#ifdef CONFIG_MAGIC_SYSRQ
+		unregister_sysrq_key('g', &sysrq_dbg_op);
+#endif
+		if (kgdb_con_registered) {
+			unregister_console(&kgdbcons);
+			kgdb_con_registered = 0;
+		}
+	}
+}
+
+/*
+ * There are times a tasklet needs to be used vs a compiled in
+ * break point so as to cause an exception outside a kgdb I/O module,
+ * such as is the case with kgdboe, where calling a breakpoint in the
+ * I/O driver itself would be fatal.
+ */
+static void kgdb_tasklet_bpt(unsigned long ing)
+{
+	kgdb_breakpoint();
+	atomic_set(&kgdb_break_tasklet_var, 0);
+}
+
+static DECLARE_TASKLET(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt, 0);
+
+void kgdb_schedule_breakpoint(void)
+{
+	if (atomic_read(&kgdb_break_tasklet_var) ||
+		atomic_read(&kgdb_active) != -1 ||
+		atomic_read(&kgdb_setting_breakpoint))
+		return;
+	atomic_inc(&kgdb_break_tasklet_var);
+	tasklet_schedule(&kgdb_tasklet_breakpoint);
+}
+EXPORT_SYMBOL_GPL(kgdb_schedule_breakpoint);
+
+static void kgdb_initial_breakpoint(void)
+{
+	kgdb_break_asap = 0;
+
+	printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n");
+	kgdb_breakpoint();
+}
+
+/**
+ *	kgdb_register_io_module - register KGDB IO module
+ *	@new_dbg_io_ops: the io ops vector
+ *
+ *	Register it with the KGDB core.
+ */
+int kgdb_register_io_module(struct kgdb_io *new_dbg_io_ops)
+{
+	int err;
+
+	spin_lock(&kgdb_registration_lock);
+
+	if (dbg_io_ops) {
+		spin_unlock(&kgdb_registration_lock);
+
+		printk(KERN_ERR "kgdb: Another I/O driver is already "
+				"registered with KGDB.\n");
+		return -EBUSY;
+	}
+
+	if (new_dbg_io_ops->init) {
+		err = new_dbg_io_ops->init();
+		if (err) {
+			spin_unlock(&kgdb_registration_lock);
+			return err;
+		}
+	}
+
+	dbg_io_ops = new_dbg_io_ops;
+
+	spin_unlock(&kgdb_registration_lock);
+
+	printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
+	       new_dbg_io_ops->name);
+
+	/* Arm KGDB now. */
+	kgdb_register_callbacks();
+
+	if (kgdb_break_asap)
+		kgdb_initial_breakpoint();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kgdb_register_io_module);
+
+/**
+ *	kkgdb_unregister_io_module - unregister KGDB IO module
+ *	@old_dbg_io_ops: the io ops vector
+ *
+ *	Unregister it with the KGDB core.
+ */
+void kgdb_unregister_io_module(struct kgdb_io *old_dbg_io_ops)
+{
+	BUG_ON(kgdb_connected);
+
+	/*
+	 * KGDB is no longer able to communicate out, so
+	 * unregister our callbacks and reset state.
+	 */
+	kgdb_unregister_callbacks();
+
+	spin_lock(&kgdb_registration_lock);
+
+	WARN_ON_ONCE(dbg_io_ops != old_dbg_io_ops);
+	dbg_io_ops = NULL;
+
+	spin_unlock(&kgdb_registration_lock);
+
+	printk(KERN_INFO
+		"kgdb: Unregistered I/O driver %s, debugger disabled.\n",
+		old_dbg_io_ops->name);
+}
+EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
+
+int dbg_io_get_char(void)
+{
+	int ret = dbg_io_ops->read_char();
+	if (ret == NO_POLL_CHAR)
+		return -1;
+	if (!dbg_kdb_mode)
+		return ret;
+	if (ret == 127)
+		return 8;
+	return ret;
+}
+
+/**
+ * kgdb_breakpoint - generate breakpoint exception
+ *
+ * This function will generate a breakpoint exception.  It is used at the
+ * beginning of a program to sync up with a debugger and can be used
+ * otherwise as a quick means to stop program execution and "break" into
+ * the debugger.
+ */
+void kgdb_breakpoint(void)
+{
+	atomic_inc(&kgdb_setting_breakpoint);
+	wmb(); /* Sync point before breakpoint */
+	arch_kgdb_breakpoint();
+	wmb(); /* Sync point after breakpoint */
+	atomic_dec(&kgdb_setting_breakpoint);
+}
+EXPORT_SYMBOL_GPL(kgdb_breakpoint);
+
+static int __init opt_kgdb_wait(char *str)
+{
+	kgdb_break_asap = 1;
+
+	kdb_init(KDB_INIT_EARLY);
+	if (kgdb_io_module_registered)
+		kgdb_initial_breakpoint();
+
+	return 0;
+}
+
+early_param("kgdbwait", opt_kgdb_wait);
diff --git a/kernel/debug/debug_core.h b/kernel/debug/debug_core.h
new file mode 100644
index 0000000..c5d753d
--- /dev/null
+++ b/kernel/debug/debug_core.h
@@ -0,0 +1,81 @@
+/*
+ * Created by: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DEBUG_CORE_H_
+#define _DEBUG_CORE_H_
+/*
+ * These are the private implementation headers between the kernel
+ * debugger core and the debugger front end code.
+ */
+
+/* kernel debug core data structures */
+struct kgdb_state {
+	int			ex_vector;
+	int			signo;
+	int			err_code;
+	int			cpu;
+	int			pass_exception;
+	unsigned long		thr_query;
+	unsigned long		threadid;
+	long			kgdb_usethreadid;
+	struct pt_regs		*linux_regs;
+};
+
+/* Exception state values */
+#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
+#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
+#define DCPU_IS_SLAVE    0x4 /* Slave cpu enter exception */
+#define DCPU_SSTEP       0x8 /* CPU is single stepping */
+
+struct debuggerinfo_struct {
+	void			*debuggerinfo;
+	struct task_struct	*task;
+	int			exception_state;
+	int			ret_state;
+	int			irq_depth;
+};
+
+extern struct debuggerinfo_struct kgdb_info[];
+
+/* kernel debug core break point routines */
+extern int dbg_remove_all_break(void);
+extern int dbg_set_sw_break(unsigned long addr);
+extern int dbg_remove_sw_break(unsigned long addr);
+extern int dbg_activate_sw_breakpoints(void);
+extern int dbg_deactivate_sw_breakpoints(void);
+
+/* polled character access to i/o module */
+extern int dbg_io_get_char(void);
+
+/* stub return value for switching between the gdbstub and kdb */
+#define DBG_PASS_EVENT -12345
+/* Switch from one cpu to another */
+#define DBG_SWITCH_CPU_EVENT -123456
+extern int dbg_switch_cpu;
+
+/* gdbstub interface functions */
+extern int gdb_serial_stub(struct kgdb_state *ks);
+extern void gdbstub_msg_write(const char *s, int len);
+
+/* gdbstub functions used for kdb <-> gdbstub transition */
+extern int gdbstub_state(struct kgdb_state *ks, char *cmd);
+extern int dbg_kdb_mode;
+
+#ifdef CONFIG_KGDB_KDB
+extern int kdb_stub(struct kgdb_state *ks);
+extern int kdb_parse(const char *cmdstr);
+#else /* ! CONFIG_KGDB_KDB */
+static inline int kdb_stub(struct kgdb_state *ks)
+{
+	return DBG_PASS_EVENT;
+}
+#endif /* CONFIG_KGDB_KDB */
+
+#endif /* _DEBUG_CORE_H_ */
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
new file mode 100644
index 0000000..4b17b32
--- /dev/null
+++ b/kernel/debug/gdbstub.c
@@ -0,0 +1,1017 @@
+/*
+ * Kernel Debug Core
+ *
+ * Maintainer: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002-2004 Timesys Corporation
+ * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
+ * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2005-2009 Wind River Systems, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * Contributors at various stages not listed above:
+ *  Jason Wessel ( jason.wessel@windriver.com )
+ *  George Anzinger <george@mvista.com>
+ *  Anurekh Saxena (anurekh.saxena@timesys.com)
+ *  Lake Stevens Instrument Division (Glenn Engel)
+ *  Jim Kingdon, Cygnus Support.
+ *
+ * Original KGDB stub: David Grothe <dave@gcom.com>,
+ * Tigran Aivazian <tigran@sco.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/unaligned.h>
+#include "debug_core.h"
+
+#define KGDB_MAX_THREAD_QUERY 17
+
+/* Our I/O buffers. */
+static char			remcom_in_buffer[BUFMAX];
+static char			remcom_out_buffer[BUFMAX];
+
+/* Storage for the registers, in GDB format. */
+static unsigned long		gdb_regs[(NUMREGBYTES +
+					sizeof(unsigned long) - 1) /
+					sizeof(unsigned long)];
+
+/*
+ * GDB remote protocol parser:
+ */
+
+static int hex(char ch)
+{
+	if ((ch >= 'a') && (ch <= 'f'))
+		return ch - 'a' + 10;
+	if ((ch >= '0') && (ch <= '9'))
+		return ch - '0';
+	if ((ch >= 'A') && (ch <= 'F'))
+		return ch - 'A' + 10;
+	return -1;
+}
+
+#ifdef CONFIG_KGDB_KDB
+static int gdbstub_read_wait(void)
+{
+	int ret = -1;
+	int i;
+
+	/* poll any additional I/O interfaces that are defined */
+	while (ret < 0)
+		for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
+			ret = kdb_poll_funcs[i]();
+			if (ret > 0)
+				break;
+		}
+	return ret;
+}
+#else
+static int gdbstub_read_wait(void)
+{
+	int ret = dbg_io_ops->read_char();
+	while (ret == NO_POLL_CHAR)
+		ret = dbg_io_ops->read_char();
+	return ret;
+}
+#endif
+/* scan for the sequence $<data>#<checksum> */
+static void get_packet(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int count;
+	char ch;
+
+	do {
+		/*
+		 * Spin and wait around for the start character, ignore all
+		 * other characters:
+		 */
+		while ((ch = (gdbstub_read_wait())) != '$')
+			/* nothing */;
+
+		kgdb_connected = 1;
+		checksum = 0;
+		xmitcsum = -1;
+
+		count = 0;
+
+		/*
+		 * now, read until a # or end of buffer is found:
+		 */
+		while (count < (BUFMAX - 1)) {
+			ch = gdbstub_read_wait();
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+		buffer[count] = 0;
+
+		if (ch == '#') {
+			xmitcsum = hex(gdbstub_read_wait()) << 4;
+			xmitcsum += hex(gdbstub_read_wait());
+
+			if (checksum != xmitcsum)
+				/* failed checksum */
+				dbg_io_ops->write_char('-');
+			else
+				/* successful transfer */
+				dbg_io_ops->write_char('+');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+		}
+	} while (checksum != xmitcsum);
+}
+
+/*
+ * Send the packet in buffer.
+ * Check for gdb connection if asked for.
+ */
+static void put_packet(char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	char ch;
+
+	/*
+	 * $<packet info>#<checksum>.
+	 */
+	while (1) {
+		dbg_io_ops->write_char('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count])) {
+			dbg_io_ops->write_char(ch);
+			checksum += ch;
+			count++;
+		}
+
+		dbg_io_ops->write_char('#');
+		dbg_io_ops->write_char(hex_asc_hi(checksum));
+		dbg_io_ops->write_char(hex_asc_lo(checksum));
+		if (dbg_io_ops->flush)
+			dbg_io_ops->flush();
+
+		/* Now see what we get in reply. */
+		ch = gdbstub_read_wait();
+
+		if (ch == 3)
+			ch = gdbstub_read_wait();
+
+		/* If we get an ACK, we are done. */
+		if (ch == '+')
+			return;
+
+		/*
+		 * If we get the start of another packet, this means
+		 * that GDB is attempting to reconnect.  We will NAK
+		 * the packet being sent, and stop trying to send this
+		 * packet.
+		 */
+		if (ch == '$') {
+			dbg_io_ops->write_char('-');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+			return;
+		}
+	}
+}
+
+static char gdbmsgbuf[BUFMAX + 1];
+
+void gdbstub_msg_write(const char *s, int len)
+{
+	char *bufptr;
+	int wcount;
+	int i;
+
+	if (len == 0)
+		len = strlen(s);
+
+	/* 'O'utput */
+	gdbmsgbuf[0] = 'O';
+
+	/* Fill and send buffers... */
+	while (len > 0) {
+		bufptr = gdbmsgbuf + 1;
+
+		/* Calculate how many this time */
+		if ((len << 1) > (BUFMAX - 2))
+			wcount = (BUFMAX - 2) >> 1;
+		else
+			wcount = len;
+
+		/* Pack in hex chars */
+		for (i = 0; i < wcount; i++)
+			bufptr = pack_hex_byte(bufptr, s[i]);
+		*bufptr = '\0';
+
+		/* Move up */
+		s += wcount;
+		len -= wcount;
+
+		/* Write packet */
+		put_packet(gdbmsgbuf);
+	}
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in
+ * buf.  Return a pointer to the last char put in buf (null). May
+ * return an error.
+ */
+int kgdb_mem2hex(char *mem, char *buf, int count)
+{
+	char *tmp;
+	int err;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory copy.  Hex conversion will work against this one.
+	 */
+	tmp = buf + count;
+
+	err = probe_kernel_read(tmp, mem, count);
+	if (!err) {
+		while (count > 0) {
+			buf = pack_hex_byte(buf, *tmp);
+			tmp++;
+			count--;
+		}
+
+		*buf = 0;
+	}
+
+	return err;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in
+ * mem.  Return a pointer to the character AFTER the last byte
+ * written.  May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+	char *tmp_raw;
+	char *tmp_hex;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory that is converted from hex.
+	 */
+	tmp_raw = buf + count * 2;
+
+	tmp_hex = tmp_raw - 1;
+	while (tmp_hex >= buf) {
+		tmp_raw--;
+		*tmp_raw = hex(*tmp_hex--);
+		*tmp_raw |= hex(*tmp_hex--) << 4;
+	}
+
+	return probe_kernel_write(mem, tmp_raw, count);
+}
+
+/*
+ * While we find nice hex chars, build a long_val.
+ * Return number of chars processed.
+ */
+int kgdb_hex2long(char **ptr, unsigned long *long_val)
+{
+	int hex_val;
+	int num = 0;
+	int negate = 0;
+
+	*long_val = 0;
+
+	if (**ptr == '-') {
+		negate = 1;
+		(*ptr)++;
+	}
+	while (**ptr) {
+		hex_val = hex(**ptr);
+		if (hex_val < 0)
+			break;
+
+		*long_val = (*long_val << 4) | hex_val;
+		num++;
+		(*ptr)++;
+	}
+
+	if (negate)
+		*long_val = -*long_val;
+
+	return num;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem.  Fix $, #, and
+ * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
+ * The input buf is overwitten with the result to write to mem.
+ */
+static int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+	int size = 0;
+	char *c = buf;
+
+	while (count-- > 0) {
+		c[size] = *buf++;
+		if (c[size] == 0x7d)
+			c[size] = *buf++ ^ 0x20;
+		size++;
+	}
+
+	return probe_kernel_write(mem, c, size);
+}
+
+/* Write memory due to an 'M' or 'X' packet. */
+static int write_mem_msg(int binary)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+	unsigned long length;
+	int err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
+	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
+		if (binary)
+			err = kgdb_ebin2mem(ptr, (char *)addr, length);
+		else
+			err = kgdb_hex2mem(ptr, (char *)addr, length);
+		if (err)
+			return err;
+		if (CACHE_FLUSH_IS_SAFE)
+			flush_icache_range(addr, addr + length);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void error_packet(char *pkt, int error)
+{
+	error = -error;
+	pkt[0] = 'E';
+	pkt[1] = hex_asc[(error / 10)];
+	pkt[2] = hex_asc[(error % 10)];
+	pkt[3] = '\0';
+}
+
+/*
+ * Thread ID accessors. We represent a flat TID space to GDB, where
+ * the per CPU idle threads (which under Linux all have PID 0) are
+ * remapped to negative TIDs.
+ */
+
+#define BUF_THREAD_ID_SIZE	16
+
+static char *pack_threadid(char *pkt, unsigned char *id)
+{
+	char *limit;
+
+	limit = pkt + BUF_THREAD_ID_SIZE;
+	while (pkt < limit)
+		pkt = pack_hex_byte(pkt, *id++);
+
+	return pkt;
+}
+
+static void int_to_threadref(unsigned char *id, int value)
+{
+	unsigned char *scan;
+	int i = 4;
+
+	scan = (unsigned char *)id;
+	while (i--)
+		*scan++ = 0;
+	put_unaligned_be32(value, scan);
+}
+
+static struct task_struct *getthread(struct pt_regs *regs, int tid)
+{
+	/*
+	 * Non-positive TIDs are remapped to the cpu shadow information
+	 */
+	if (tid == 0 || tid == -1)
+		tid = -atomic_read(&kgdb_active) - 2;
+	if (tid < -1 && tid > -NR_CPUS - 2) {
+		if (kgdb_info[-tid - 2].task)
+			return kgdb_info[-tid - 2].task;
+		else
+			return idle_task(-tid - 2);
+	}
+	if (tid <= 0) {
+		printk(KERN_ERR "KGDB: Internal thread select error\n");
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * find_task_by_pid_ns() does not take the tasklist lock anymore
+	 * but is nicely RCU locked - hence is a pretty resilient
+	 * thing to use:
+	 */
+	return find_task_by_pid_ns(tid, &init_pid_ns);
+}
+
+
+/*
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
+ */
+static inline int shadow_pid(int realpid)
+{
+	if (realpid)
+		return realpid;
+
+	return -raw_smp_processor_id() - 2;
+}
+
+/*
+ * All the functions that start with gdb_cmd are the various
+ * operations to implement the handlers for the gdbserial protocol
+ * where KGDB is communicating with an external debugger
+ */
+
+/* Handle the '?' status packets */
+static void gdb_cmd_status(struct kgdb_state *ks)
+{
+	/*
+	 * We know that this packet is only sent
+	 * during initial connect.  So to be safe,
+	 * we clear out our breakpoints now in case
+	 * GDB is reconnecting.
+	 */
+	dbg_remove_all_break();
+
+	remcom_out_buffer[0] = 'S';
+	pack_hex_byte(&remcom_out_buffer[1], ks->signo);
+}
+
+/* Handle the 'g' get registers request */
+static void gdb_cmd_getregs(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	void *local_debuggerinfo;
+	int i;
+
+	thread = kgdb_usethread;
+	if (!thread) {
+		thread = kgdb_info[ks->cpu].task;
+		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
+	} else {
+		local_debuggerinfo = NULL;
+		for_each_online_cpu(i) {
+			/*
+			 * Try to find the task on some other
+			 * or possibly this node if we do not
+			 * find the matching task then we try
+			 * to approximate the results.
+			 */
+			if (thread == kgdb_info[i].task)
+				local_debuggerinfo = kgdb_info[i].debuggerinfo;
+		}
+	}
+
+	/*
+	 * All threads that don't have debuggerinfo should be
+	 * in schedule() sleeping, since all other CPUs
+	 * are in kgdb_wait, and thus have debuggerinfo.
+	 */
+	if (local_debuggerinfo) {
+		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
+	} else {
+		/*
+		 * Pull stuff saved during switch_to; nothing
+		 * else is accessible (or even particularly
+		 * relevant).
+		 *
+		 * This should be enough for a stack trace.
+		 */
+		sleeping_thread_to_gdb_regs(gdb_regs, thread);
+	}
+	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
+}
+
+/* Handle the 'G' set registers request */
+static void gdb_cmd_setregs(struct kgdb_state *ks)
+{
+	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
+
+	if (kgdb_usethread && kgdb_usethread != current) {
+		error_packet(remcom_out_buffer, -EINVAL);
+	} else {
+		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
+		strcpy(remcom_out_buffer, "OK");
+	}
+}
+
+/* Handle the 'm' memory read bytes */
+static void gdb_cmd_memread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long length;
+	unsigned long addr;
+	int err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
+					kgdb_hex2long(&ptr, &length) > 0) {
+		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
+		if (err)
+			error_packet(remcom_out_buffer, err);
+	} else {
+		error_packet(remcom_out_buffer, -EINVAL);
+	}
+}
+
+/* Handle the 'M' memory write bytes */
+static void gdb_cmd_memwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(0);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'X' memory binary write bytes */
+static void gdb_cmd_binwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(1);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'D' or 'k', detach or kill packets */
+static void gdb_cmd_detachkill(struct kgdb_state *ks)
+{
+	int error;
+
+	/* The detach case */
+	if (remcom_in_buffer[0] == 'D') {
+		error = dbg_remove_all_break();
+		if (error < 0) {
+			error_packet(remcom_out_buffer, error);
+		} else {
+			strcpy(remcom_out_buffer, "OK");
+			kgdb_connected = 0;
+		}
+		put_packet(remcom_out_buffer);
+	} else {
+		/*
+		 * Assume the kill case, with no exit code checking,
+		 * trying to force detach the debugger:
+		 */
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+	}
+}
+
+/* Handle the 'R' reboot packets */
+static int gdb_cmd_reboot(struct kgdb_state *ks)
+{
+	/* For now, only honor R0 */
+	if (strcmp(remcom_in_buffer, "R0") == 0) {
+		printk(KERN_CRIT "Executing emergency reboot\n");
+		strcpy(remcom_out_buffer, "OK");
+		put_packet(remcom_out_buffer);
+
+		/*
+		 * Execution should not return from
+		 * machine_emergency_restart()
+		 */
+		machine_emergency_restart();
+		kgdb_connected = 0;
+
+		return 1;
+	}
+	return 0;
+}
+
+/* Handle the 'q' query packets */
+static void gdb_cmd_query(struct kgdb_state *ks)
+{
+	struct task_struct *g;
+	struct task_struct *p;
+	unsigned char thref[8];
+	char *ptr;
+	int i;
+	int cpu;
+	int finished = 0;
+
+	switch (remcom_in_buffer[1]) {
+	case 's':
+	case 'f':
+		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+
+		i = 0;
+		remcom_out_buffer[0] = 'm';
+		ptr = remcom_out_buffer + 1;
+		if (remcom_in_buffer[1] == 'f') {
+			/* Each cpu is a shadow thread */
+			for_each_online_cpu(cpu) {
+				ks->thr_query = 0;
+				int_to_threadref(thref, -cpu - 2);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				i++;
+			}
+		}
+
+		do_each_thread(g, p) {
+			if (i >= ks->thr_query && !finished) {
+				int_to_threadref(thref, p->pid);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				ks->thr_query++;
+				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+					finished = 1;
+			}
+			i++;
+		} while_each_thread(g, p);
+
+		*(--ptr) = '\0';
+		break;
+
+	case 'C':
+		/* Current thread id */
+		strcpy(remcom_out_buffer, "QC");
+		ks->threadid = shadow_pid(current->pid);
+		int_to_threadref(thref, ks->threadid);
+		pack_threadid(remcom_out_buffer + 2, thref);
+		break;
+	case 'T':
+		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		ks->threadid = 0;
+		ptr = remcom_in_buffer + 17;
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!getthread(ks->linux_regs, ks->threadid)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		if ((int)ks->threadid > 0) {
+			kgdb_mem2hex(getthread(ks->linux_regs,
+					ks->threadid)->comm,
+					remcom_out_buffer, 16);
+		} else {
+			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
+
+			sprintf(tmpstr, "shadowCPU%d",
+					(int)(-ks->threadid - 2));
+			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
+		}
+		break;
+#ifdef CONFIG_KGDB_KDB
+	case 'R':
+		if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
+			int len = strlen(remcom_in_buffer + 6);
+
+			if ((len % 2) != 0) {
+				strcpy(remcom_out_buffer, "E01");
+				break;
+			}
+			kgdb_hex2mem(remcom_in_buffer + 6,
+				     remcom_out_buffer, len);
+			len = len / 2;
+			remcom_out_buffer[len++] = 0;
+
+			kdb_parse(remcom_out_buffer);
+			strcpy(remcom_out_buffer, "OK");
+		}
+		break;
+#endif
+	}
+}
+
+/* Handle the 'H' task query packets */
+static void gdb_cmd_task(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	char *ptr;
+
+	switch (remcom_in_buffer[1]) {
+	case 'g':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		thread = getthread(ks->linux_regs, ks->threadid);
+		if (!thread && ks->threadid > 0) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		kgdb_usethread = thread;
+		ks->kgdb_usethreadid = ks->threadid;
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	case 'c':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!ks->threadid) {
+			kgdb_contthread = NULL;
+		} else {
+			thread = getthread(ks->linux_regs, ks->threadid);
+			if (!thread && ks->threadid > 0) {
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			kgdb_contthread = thread;
+		}
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	}
+}
+
+/* Handle the 'T' thread query packets */
+static void gdb_cmd_thread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	struct task_struct *thread;
+
+	kgdb_hex2long(&ptr, &ks->threadid);
+	thread = getthread(ks->linux_regs, ks->threadid);
+	if (thread)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, -EINVAL);
+}
+
+/* Handle the 'z' or 'Z' breakpoint remove or set packets */
+static void gdb_cmd_break(struct kgdb_state *ks)
+{
+	/*
+	 * Since GDB-5.3, it's been drafted that '0' is a software
+	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
+	 */
+	char *bpt_type = &remcom_in_buffer[1];
+	char *ptr = &remcom_in_buffer[2];
+	unsigned long addr;
+	unsigned long length;
+	int error = 0;
+
+	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
+		/* Unsupported */
+		if (*bpt_type > '4')
+			return;
+	} else {
+		if (*bpt_type != '0' && *bpt_type != '1')
+			/* Unsupported. */
+			return;
+	}
+
+	/*
+	 * Test if this is a hardware breakpoint, and
+	 * if we support it:
+	 */
+	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
+		/* Unsupported. */
+		return;
+
+	if (*(ptr++) != ',') {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (!kgdb_hex2long(&ptr, &addr)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (*(ptr++) != ',' ||
+		!kgdb_hex2long(&ptr, &length)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+
+	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
+		error = dbg_set_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
+		error = dbg_remove_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'Z')
+		error = arch_kgdb_ops.set_hw_breakpoint(addr,
+			(int)length, *bpt_type - '0');
+	else if (remcom_in_buffer[0] == 'z')
+		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
+			(int) length, *bpt_type - '0');
+
+	if (error == 0)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, error);
+}
+
+/* Handle the 'C' signal / exception passing packets */
+static int gdb_cmd_exception_pass(struct kgdb_state *ks)
+{
+	/* C09 == pass exception
+	 * C15 == detach kgdb, pass exception
+	 */
+	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'c';
+
+	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'D';
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+		return 1;
+
+	} else {
+		gdbstub_msg_write("KGDB only knows signal 9 (pass)"
+			" and 15 (pass and disconnect)\n"
+			"Executing a continue without signal passing\n", 0);
+		remcom_in_buffer[0] = 'c';
+	}
+
+	/* Indicate fall through */
+	return -1;
+}
+
+/*
+ * This function performs all gdbserial command procesing
+ */
+int gdb_serial_stub(struct kgdb_state *ks)
+{
+	int error = 0;
+	int tmp;
+
+	/* Clear the out buffer. */
+	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+	if (kgdb_connected) {
+		unsigned char thref[8];
+		char *ptr;
+
+		/* Reply to host that an exception has occurred */
+		ptr = remcom_out_buffer;
+		*ptr++ = 'T';
+		ptr = pack_hex_byte(ptr, ks->signo);
+		ptr += strlen(strcpy(ptr, "thread:"));
+		int_to_threadref(thref, shadow_pid(current->pid));
+		ptr = pack_threadid(ptr, thref);
+		*ptr++ = ';';
+		put_packet(remcom_out_buffer);
+	}
+
+	kgdb_usethread = kgdb_info[ks->cpu].task;
+	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
+	ks->pass_exception = 0;
+
+	while (1) {
+		error = 0;
+
+		/* Clear the out buffer. */
+		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+		get_packet(remcom_in_buffer);
+
+		switch (remcom_in_buffer[0]) {
+		case '?': /* gdbserial status */
+			gdb_cmd_status(ks);
+			break;
+		case 'g': /* return the value of the CPU registers */
+			gdb_cmd_getregs(ks);
+			break;
+		case 'G': /* set the value of the CPU registers - return OK */
+			gdb_cmd_setregs(ks);
+			break;
+		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+			gdb_cmd_memread(ks);
+			break;
+		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_memwrite(ks);
+			break;
+		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_binwrite(ks);
+			break;
+			/* kill or detach. KGDB should treat this like a
+			 * continue.
+			 */
+		case 'D': /* Debugger detach */
+		case 'k': /* Debugger detach via kill */
+			gdb_cmd_detachkill(ks);
+			goto default_handle;
+		case 'R': /* Reboot */
+			if (gdb_cmd_reboot(ks))
+				goto default_handle;
+			break;
+		case 'q': /* query command */
+			gdb_cmd_query(ks);
+			break;
+		case 'H': /* task related */
+			gdb_cmd_task(ks);
+			break;
+		case 'T': /* Query thread status */
+			gdb_cmd_thread(ks);
+			break;
+		case 'z': /* Break point remove */
+		case 'Z': /* Break point set */
+			gdb_cmd_break(ks);
+			break;
+#ifdef CONFIG_KGDB_KDB
+		case '3': /* Escape into back into kdb */
+			if (remcom_in_buffer[1] == '\0') {
+				gdb_cmd_detachkill(ks);
+				return DBG_PASS_EVENT;
+			}
+#endif
+		case 'C': /* Exception passing */
+			tmp = gdb_cmd_exception_pass(ks);
+			if (tmp > 0)
+				goto default_handle;
+			if (tmp == 0)
+				break;
+			/* Fall through on tmp < 0 */
+		case 'c': /* Continue packet */
+		case 's': /* Single step packet */
+			if (kgdb_contthread && kgdb_contthread != current) {
+				/* Can't switch threads in kgdb */
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			dbg_activate_sw_breakpoints();
+			/* Fall through to default processing */
+		default:
+default_handle:
+			error = kgdb_arch_handle_exception(ks->ex_vector,
+						ks->signo,
+						ks->err_code,
+						remcom_in_buffer,
+						remcom_out_buffer,
+						ks->linux_regs);
+			/*
+			 * Leave cmd processing on error, detach,
+			 * kill, continue, or single step.
+			 */
+			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
+			    remcom_in_buffer[0] == 'k') {
+				error = 0;
+				goto kgdb_exit;
+			}
+
+		}
+
+		/* reply to the request */
+		put_packet(remcom_out_buffer);
+	}
+
+kgdb_exit:
+	if (ks->pass_exception)
+		error = 1;
+	return error;
+}
+
+int gdbstub_state(struct kgdb_state *ks, char *cmd)
+{
+	int error;
+
+	switch (cmd[0]) {
+	case 'e':
+		error = kgdb_arch_handle_exception(ks->ex_vector,
+						   ks->signo,
+						   ks->err_code,
+						   remcom_in_buffer,
+						   remcom_out_buffer,
+						   ks->linux_regs);
+		return error;
+	case 's':
+	case 'c':
+		strcpy(remcom_in_buffer, cmd);
+		return 0;
+	case '?':
+		gdb_cmd_status(ks);
+		break;
+	case '\0':
+		strcpy(remcom_out_buffer, "");
+		break;
+	}
+	dbg_io_ops->write_char('+');
+	put_packet(remcom_out_buffer);
+	return 0;
+}
diff --git a/kernel/debug/kdb/.gitignore b/kernel/debug/kdb/.gitignore
new file mode 100644
index 0000000..396d12e
--- /dev/null
+++ b/kernel/debug/kdb/.gitignore
@@ -0,0 +1 @@
+gen-kdb_cmds.c
diff --git a/kernel/debug/kdb/Makefile b/kernel/debug/kdb/Makefile
new file mode 100644
index 0000000..d4fc58f
--- /dev/null
+++ b/kernel/debug/kdb/Makefile
@@ -0,0 +1,25 @@
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+# Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved.
+#
+
+CCVERSION	:= $(shell $(CC) -v 2>&1 | sed -ne '$$p')
+obj-y := kdb_io.o kdb_main.o kdb_support.o kdb_bt.o gen-kdb_cmds.o kdb_bp.o kdb_debugger.o
+obj-$(CONFIG_KDB_KEYBOARD)    += kdb_keyboard.o
+
+clean-files := gen-kdb_cmds.c
+
+quiet_cmd_gen-kdb = GENKDB  $@
+      cmd_gen-kdb = $(AWK) 'BEGIN {print "\#include <linux/stddef.h>"; print "\#include <linux/init.h>"} \
+		/^\#/{next} \
+		/^[ \t]*$$/{next} \
+		{gsub(/"/, "\\\"", $$0); \
+		  print "static __initdata char kdb_cmd" cmds++ "[] = \"" $$0 "\\n\";"} \
+		END {print "extern char *kdb_cmds[]; char __initdata *kdb_cmds[] = {"; for (i = 0; i < cmds; ++i) {print "  kdb_cmd" i ","}; print("  NULL\n};");}' \
+		$(filter-out %/Makefile,$^) > $@#
+
+$(obj)/gen-kdb_cmds.c:	$(src)/kdb_cmds $(src)/Makefile
+	$(call cmd,gen-kdb)
diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c
new file mode 100644
index 0000000..75bd9b3
--- /dev/null
+++ b/kernel/debug/kdb/kdb_bp.c
@@ -0,0 +1,564 @@
+/*
+ * Kernel Debugger Architecture Independent Breakpoint Handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kdb.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include "kdb_private.h"
+
+/*
+ * Table of kdb_breakpoints
+ */
+kdb_bp_t kdb_breakpoints[KDB_MAXBPT];
+
+static void kdb_setsinglestep(struct pt_regs *regs)
+{
+	KDB_STATE_SET(DOING_SS);
+}
+
+static char *kdb_rwtypes[] = {
+	"Instruction(i)",
+	"Instruction(Register)",
+	"Data Write",
+	"I/O",
+	"Data Access"
+};
+
+static char *kdb_bptype(kdb_bp_t *bp)
+{
+	if (bp->bp_type < 0 || bp->bp_type > 4)
+		return "";
+
+	return kdb_rwtypes[bp->bp_type];
+}
+
+static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp)
+{
+	int nextarg = *nextargp;
+	int diag;
+
+	bp->bph_length = 1;
+	if ((argc + 1) != nextarg) {
+		if (strnicmp(argv[nextarg], "datar", sizeof("datar")) == 0)
+			bp->bp_type = BP_ACCESS_WATCHPOINT;
+		else if (strnicmp(argv[nextarg], "dataw", sizeof("dataw")) == 0)
+			bp->bp_type = BP_WRITE_WATCHPOINT;
+		else if (strnicmp(argv[nextarg], "inst", sizeof("inst")) == 0)
+			bp->bp_type = BP_HARDWARE_BREAKPOINT;
+		else
+			return KDB_ARGCOUNT;
+
+		bp->bph_length = 1;
+
+		nextarg++;
+
+		if ((argc + 1) != nextarg) {
+			unsigned long len;
+
+			diag = kdbgetularg((char *)argv[nextarg],
+					   &len);
+			if (diag)
+				return diag;
+
+
+			if (len > 8)
+				return KDB_BADLENGTH;
+
+			bp->bph_length = len;
+			nextarg++;
+		}
+
+		if ((argc + 1) != nextarg)
+			return KDB_ARGCOUNT;
+	}
+
+	*nextargp = nextarg;
+	return 0;
+}
+
+static int _kdb_bp_remove(kdb_bp_t *bp)
+{
+	int ret = 1;
+	if (!bp->bp_installed)
+		return ret;
+	if (!bp->bp_type)
+		ret = dbg_remove_sw_break(bp->bp_addr);
+	else
+		ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr,
+			 bp->bph_length,
+			 bp->bp_type);
+	if (ret == 0)
+		bp->bp_installed = 0;
+	return ret;
+}
+
+static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp)
+{
+	if (KDB_DEBUG(BP))
+		kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs));
+
+	/*
+	 * Setup single step
+	 */
+	kdb_setsinglestep(regs);
+
+	/*
+	 * Reset delay attribute
+	 */
+	bp->bp_delay = 0;
+	bp->bp_delayed = 1;
+}
+
+static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp)
+{
+	int ret;
+	/*
+	 * Install the breakpoint, if it is not already installed.
+	 */
+
+	if (KDB_DEBUG(BP))
+		kdb_printf("%s: bp_installed %d\n",
+			   __func__, bp->bp_installed);
+	if (!KDB_STATE(SSBPT))
+		bp->bp_delay = 0;
+	if (bp->bp_installed)
+		return 1;
+	if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) {
+		if (KDB_DEBUG(BP))
+			kdb_printf("%s: delayed bp\n", __func__);
+		kdb_handle_bp(regs, bp);
+		return 0;
+	}
+	if (!bp->bp_type)
+		ret = dbg_set_sw_break(bp->bp_addr);
+	else
+		ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr,
+			 bp->bph_length,
+			 bp->bp_type);
+	if (ret == 0) {
+		bp->bp_installed = 1;
+	} else {
+		kdb_printf("%s: failed to set breakpoint at 0x%lx\n",
+			   __func__, bp->bp_addr);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * kdb_bp_install
+ *
+ *	Install kdb_breakpoints prior to returning from the
+ *	kernel debugger.  This allows the kdb_breakpoints to be set
+ *	upon functions that are used internally by kdb, such as
+ *	printk().  This function is only called once per kdb session.
+ */
+void kdb_bp_install(struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < KDB_MAXBPT; i++) {
+		kdb_bp_t *bp = &kdb_breakpoints[i];
+
+		if (KDB_DEBUG(BP)) {
+			kdb_printf("%s: bp %d bp_enabled %d\n",
+				   __func__, i, bp->bp_enabled);
+		}
+		if (bp->bp_enabled)
+			_kdb_bp_install(regs, bp);
+	}
+}
+
+/*
+ * kdb_bp_remove
+ *
+ *	Remove kdb_breakpoints upon entry to the kernel debugger.
+ *
+ * Parameters:
+ *	None.
+ * Outputs:
+ *	None.
+ * Returns:
+ *	None.
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+void kdb_bp_remove(void)
+{
+	int i;
+
+	for (i = KDB_MAXBPT - 1; i >= 0; i--) {
+		kdb_bp_t *bp = &kdb_breakpoints[i];
+
+		if (KDB_DEBUG(BP)) {
+			kdb_printf("%s: bp %d bp_enabled %d\n",
+				   __func__, i, bp->bp_enabled);
+		}
+		if (bp->bp_enabled)
+			_kdb_bp_remove(bp);
+	}
+}
+
+
+/*
+ * kdb_printbp
+ *
+ *	Internal function to format and print a breakpoint entry.
+ *
+ * Parameters:
+ *	None.
+ * Outputs:
+ *	None.
+ * Returns:
+ *	None.
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+
+static void kdb_printbp(kdb_bp_t *bp, int i)
+{
+	kdb_printf("%s ", kdb_bptype(bp));
+	kdb_printf("BP #%d at ", i);
+	kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT);
+
+	if (bp->bp_enabled)
+		kdb_printf("\n    is enabled");
+	else
+		kdb_printf("\n    is disabled");
+
+	kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n",
+		   bp->bp_addr, bp->bp_type, bp->bp_installed);
+
+	kdb_printf("\n");
+}
+
+/*
+ * kdb_bp
+ *
+ *	Handle the bp commands.
+ *
+ *	[bp|bph] <addr-expression> [DATAR|DATAW]
+ *
+ * Parameters:
+ *	argc	Count of arguments in argv
+ *	argv	Space delimited command line arguments
+ * Outputs:
+ *	None.
+ * Returns:
+ *	Zero for success, a kdb diagnostic if failure.
+ * Locking:
+ *	None.
+ * Remarks:
+ *
+ *	bp	Set breakpoint on all cpus.  Only use hardware assist if need.
+ *	bph	Set breakpoint on all cpus.  Force hardware register
+ */
+
+static int kdb_bp(int argc, const char **argv)
+{
+	int i, bpno;
+	kdb_bp_t *bp, *bp_check;
+	int diag;
+	int free;
+	char *symname = NULL;
+	long offset = 0ul;
+	int nextarg;
+	kdb_bp_t template = {0};
+
+	if (argc == 0) {
+		/*
+		 * Display breakpoint table
+		 */
+		for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT;
+		     bpno++, bp++) {
+			if (bp->bp_free)
+				continue;
+			kdb_printbp(bp, bpno);
+		}
+
+		return 0;
+	}
+
+	nextarg = 1;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr,
+			     &offset, &symname);
+	if (diag)
+		return diag;
+	if (!template.bp_addr)
+		return KDB_BADINT;
+
+	/*
+	 * Find an empty bp structure to allocate
+	 */
+	free = KDB_MAXBPT;
+	for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) {
+		if (bp->bp_free)
+			break;
+	}
+
+	if (bpno == KDB_MAXBPT)
+		return KDB_TOOMANYBPT;
+
+	if (strcmp(argv[0], "bph") == 0) {
+		template.bp_type = BP_HARDWARE_BREAKPOINT;
+		diag = kdb_parsebp(argc, argv, &nextarg, &template);
+		if (diag)
+			return diag;
+	} else {
+		template.bp_type = BP_BREAKPOINT;
+	}
+
+	/*
+	 * Check for clashing breakpoints.
+	 *
+	 * Note, in this design we can't have hardware breakpoints
+	 * enabled for both read and write on the same address.
+	 */
+	for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT;
+	     i++, bp_check++) {
+		if (!bp_check->bp_free &&
+		    bp_check->bp_addr == template.bp_addr) {
+			kdb_printf("You already have a breakpoint at "
+				   kdb_bfd_vma_fmt0 "\n", template.bp_addr);
+			return KDB_DUPBPT;
+		}
+	}
+
+	template.bp_enabled = 1;
+
+	/*
+	 * Actually allocate the breakpoint found earlier
+	 */
+	*bp = template;
+	bp->bp_free = 0;
+
+	kdb_printbp(bp, bpno);
+
+	return 0;
+}
+
+/*
+ * kdb_bc
+ *
+ *	Handles the 'bc', 'be', and 'bd' commands
+ *
+ *	[bd|bc|be] <breakpoint-number>
+ *	[bd|bc|be] *
+ *
+ * Parameters:
+ *	argc	Count of arguments in argv
+ *	argv	Space delimited command line arguments
+ * Outputs:
+ *	None.
+ * Returns:
+ *	Zero for success, a kdb diagnostic for failure
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+static int kdb_bc(int argc, const char **argv)
+{
+	unsigned long addr;
+	kdb_bp_t *bp = NULL;
+	int lowbp = KDB_MAXBPT;
+	int highbp = 0;
+	int done = 0;
+	int i;
+	int diag = 0;
+
+	int cmd;			/* KDBCMD_B? */
+#define KDBCMD_BC	0
+#define KDBCMD_BE	1
+#define KDBCMD_BD	2
+
+	if (strcmp(argv[0], "be") == 0)
+		cmd = KDBCMD_BE;
+	else if (strcmp(argv[0], "bd") == 0)
+		cmd = KDBCMD_BD;
+	else
+		cmd = KDBCMD_BC;
+
+	if (argc != 1)
+		return KDB_ARGCOUNT;
+
+	if (strcmp(argv[1], "*") == 0) {
+		lowbp = 0;
+		highbp = KDB_MAXBPT;
+	} else {
+		diag = kdbgetularg(argv[1], &addr);
+		if (diag)
+			return diag;
+
+		/*
+		 * For addresses less than the maximum breakpoint number,
+		 * assume that the breakpoint number is desired.
+		 */
+		if (addr < KDB_MAXBPT) {
+			bp = &kdb_breakpoints[addr];
+			lowbp = highbp = addr;
+			highbp++;
+		} else {
+			for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT;
+			    i++, bp++) {
+				if (bp->bp_addr == addr) {
+					lowbp = highbp = i;
+					highbp++;
+					break;
+				}
+			}
+		}
+	}
+
+	/*
+	 * Now operate on the set of breakpoints matching the input
+	 * criteria (either '*' for all, or an individual breakpoint).
+	 */
+	for (bp = &kdb_breakpoints[lowbp], i = lowbp;
+	    i < highbp;
+	    i++, bp++) {
+		if (bp->bp_free)
+			continue;
+
+		done++;
+
+		switch (cmd) {
+		case KDBCMD_BC:
+			bp->bp_enabled = 0;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " cleared\n",
+				   i, bp->bp_addr);
+
+			bp->bp_addr = 0;
+			bp->bp_free = 1;
+
+			break;
+		case KDBCMD_BE:
+			bp->bp_enabled = 1;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " enabled",
+				   i, bp->bp_addr);
+
+			kdb_printf("\n");
+			break;
+		case KDBCMD_BD:
+			if (!bp->bp_enabled)
+				break;
+
+			bp->bp_enabled = 0;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " disabled\n",
+				   i, bp->bp_addr);
+
+			break;
+		}
+		if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) {
+			bp->bp_delay = 0;
+			KDB_STATE_CLEAR(SSBPT);
+		}
+	}
+
+	return (!done) ? KDB_BPTNOTFOUND : 0;
+}
+
+/*
+ * kdb_ss
+ *
+ *	Process the 'ss' (Single Step) and 'ssb' (Single Step to Branch)
+ *	commands.
+ *
+ *	ss
+ *	ssb
+ *
+ * Parameters:
+ *	argc	Argument count
+ *	argv	Argument vector
+ * Outputs:
+ *	None.
+ * Returns:
+ *	KDB_CMD_SS[B] for success, a kdb error if failure.
+ * Locking:
+ *	None.
+ * Remarks:
+ *
+ *	Set the arch specific option to trigger a debug trap after the next
+ *	instruction.
+ *
+ *	For 'ssb', set the trace flag in the debug trap handler
+ *	after printing the current insn and return directly without
+ *	invoking the kdb command processor, until a branch instruction
+ *	is encountered.
+ */
+
+static int kdb_ss(int argc, const char **argv)
+{
+	int ssb = 0;
+
+	ssb = (strcmp(argv[0], "ssb") == 0);
+	if (argc != 0)
+		return KDB_ARGCOUNT;
+	/*
+	 * Set trace flag and go.
+	 */
+	KDB_STATE_SET(DOING_SS);
+	if (ssb) {
+		KDB_STATE_SET(DOING_SSB);
+		return KDB_CMD_SSB;
+	}
+	return KDB_CMD_SS;
+}
+
+/* Initialize the breakpoint table and register	breakpoint commands. */
+
+void __init kdb_initbptab(void)
+{
+	int i;
+	kdb_bp_t *bp;
+
+	/*
+	 * First time initialization.
+	 */
+	memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints));
+
+	for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++)
+		bp->bp_free = 1;
+
+	kdb_register_repeat("bp", kdb_bp, "[<vaddr>]",
+		"Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("bl", kdb_bp, "[<vaddr>]",
+		"Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
+	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)
+		kdb_register_repeat("bph", kdb_bp, "[<vaddr>]",
+		"[datar [length]|dataw [length]]   Set hw brk", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("bc", kdb_bc, "<bpnum>",
+		"Clear Breakpoint", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("be", kdb_bc, "<bpnum>",
+		"Enable Breakpoint", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("bd", kdb_bc, "<bpnum>",
+		"Disable Breakpoint", 0, KDB_REPEAT_NONE);
+
+	kdb_register_repeat("ss", kdb_ss, "",
+		"Single Step", 1, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("ssb", kdb_ss, "",
+		"Single step to branch/call", 0, KDB_REPEAT_NO_ARGS);
+	/*
+	 * Architecture dependent initialization.
+	 */
+}
diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
new file mode 100644
index 0000000..2f62fe8
--- /dev/null
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -0,0 +1,210 @@
+/*
+ * Kernel Debugger Architecture Independent Stack Traceback
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kdb.h>
+#include <linux/nmi.h>
+#include <asm/system.h>
+#include "kdb_private.h"
+
+
+static void kdb_show_stack(struct task_struct *p, void *addr)
+{
+	int old_lvl = console_loglevel;
+	console_loglevel = 15;
+	kdb_trap_printk++;
+	kdb_set_current_task(p);
+	if (addr) {
+		show_stack((struct task_struct *)p, addr);
+	} else if (kdb_current_regs) {
+#ifdef CONFIG_X86
+		show_stack(p, &kdb_current_regs->sp);
+#else
+		show_stack(p, NULL);
+#endif
+	} else {
+		show_stack(p, NULL);
+	}
+	console_loglevel = old_lvl;
+	kdb_trap_printk--;
+}
+
+/*
+ * kdb_bt
+ *
+ *	This function implements the 'bt' command.  Print a stack
+ *	traceback.
+ *
+ *	bt [<address-expression>]	(addr-exp is for alternate stacks)
+ *	btp <pid>			Kernel stack for <pid>
+ *	btt <address-expression>	Kernel stack for task structure at
+ *					<address-expression>
+ *	bta [DRSTCZEUIMA]		All useful processes, optionally
+ *					filtered by state
+ *	btc [<cpu>]			The current process on one cpu,
+ *					default is all cpus
+ *
+ *	bt <address-expression> refers to a address on the stack, that location
+ *	is assumed to contain a return address.
+ *
+ *	btt <address-expression> refers to the address of a struct task.
+ *
+ * Inputs:
+ *	argc	argument count
+ *	argv	argument vector
+ * Outputs:
+ *	None.
+ * Returns:
+ *	zero for success, a kdb diagnostic if error
+ * Locking:
+ *	none.
+ * Remarks:
+ *	Backtrack works best when the code uses frame pointers.  But even
+ *	without frame pointers we should get a reasonable trace.
+ *
+ *	mds comes in handy when examining the stack to do a manual traceback or
+ *	to get a starting point for bt <address-expression>.
+ */
+
+static int
+kdb_bt1(struct task_struct *p, unsigned long mask,
+	int argcount, int btaprompt)
+{
+	char buffer[2];
+	if (kdb_getarea(buffer[0], (unsigned long)p) ||
+	    kdb_getarea(buffer[0], (unsigned long)(p+1)-1))
+		return KDB_BADADDR;
+	if (!kdb_task_state(p, mask))
+		return 0;
+	kdb_printf("Stack traceback for pid %d\n", p->pid);
+	kdb_ps1(p);
+	kdb_show_stack(p, NULL);
+	if (btaprompt) {
+		kdb_getstr(buffer, sizeof(buffer),
+			   "Enter <q> to end, <cr> to continue:");
+		if (buffer[0] == 'q') {
+			kdb_printf("\n");
+			return 1;
+		}
+	}
+	touch_nmi_watchdog();
+	return 0;
+}
+
+int
+kdb_bt(int argc, const char **argv)
+{
+	int diag;
+	int argcount = 5;
+	int btaprompt = 1;
+	int nextarg;
+	unsigned long addr;
+	long offset;
+
+	kdbgetintenv("BTARGS", &argcount);	/* Arguments to print */
+	kdbgetintenv("BTAPROMPT", &btaprompt);	/* Prompt after each
+						 * proc in bta */
+
+	if (strcmp(argv[0], "bta") == 0) {
+		struct task_struct *g, *p;
+		unsigned long cpu;
+		unsigned long mask = kdb_task_state_string(argc ? argv[1] :
+							   NULL);
+		if (argc == 0)
+			kdb_ps_suppressed();
+		/* Run the active tasks first */
+		for_each_online_cpu(cpu) {
+			p = kdb_curr_task(cpu);
+			if (kdb_bt1(p, mask, argcount, btaprompt))
+				return 0;
+		}
+		/* Now the inactive tasks */
+		kdb_do_each_thread(g, p) {
+			if (task_curr(p))
+				continue;
+			if (kdb_bt1(p, mask, argcount, btaprompt))
+				return 0;
+		} kdb_while_each_thread(g, p);
+	} else if (strcmp(argv[0], "btp") == 0) {
+		struct task_struct *p;
+		unsigned long pid;
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &pid);
+		if (diag)
+			return diag;
+		p = find_task_by_pid_ns(pid, &init_pid_ns);
+		if (p) {
+			kdb_set_current_task(p);
+			return kdb_bt1(p, ~0UL, argcount, 0);
+		}
+		kdb_printf("No process with pid == %ld found\n", pid);
+		return 0;
+	} else if (strcmp(argv[0], "btt") == 0) {
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &addr);
+		if (diag)
+			return diag;
+		kdb_set_current_task((struct task_struct *)addr);
+		return kdb_bt1((struct task_struct *)addr, ~0UL, argcount, 0);
+	} else if (strcmp(argv[0], "btc") == 0) {
+		unsigned long cpu = ~0;
+		struct task_struct *save_current_task = kdb_current_task;
+		char buf[80];
+		if (argc > 1)
+			return KDB_ARGCOUNT;
+		if (argc == 1) {
+			diag = kdbgetularg((char *)argv[1], &cpu);
+			if (diag)
+				return diag;
+		}
+		/* Recursive use of kdb_parse, do not use argv after
+		 * this point */
+		argv = NULL;
+		if (cpu != ~0) {
+			if (cpu >= num_possible_cpus() || !cpu_online(cpu)) {
+				kdb_printf("no process for cpu %ld\n", cpu);
+				return 0;
+			}
+			sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+			kdb_parse(buf);
+			return 0;
+		}
+		kdb_printf("btc: cpu status: ");
+		kdb_parse("cpu\n");
+		for_each_online_cpu(cpu) {
+			sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+			kdb_parse(buf);
+			touch_nmi_watchdog();
+		}
+		kdb_set_current_task(save_current_task);
+		return 0;
+	} else {
+		if (argc) {
+			nextarg = 1;
+			diag = kdbgetaddrarg(argc, argv, &nextarg, &addr,
+					     &offset, NULL);
+			if (diag)
+				return diag;
+			kdb_show_stack(kdb_current_task, (void *)addr);
+			return 0;
+		} else {
+			return kdb_bt1(kdb_current_task, ~0UL, argcount, 0);
+		}
+	}
+
+	/* NOTREACHED */
+	return 0;
+}
diff --git a/kernel/debug/kdb/kdb_cmds b/kernel/debug/kdb/kdb_cmds
new file mode 100644
index 0000000..56c88e4
--- /dev/null
+++ b/kernel/debug/kdb/kdb_cmds
@@ -0,0 +1,35 @@
+# Initial commands for kdb, alter to suit your needs.
+# These commands are executed in kdb_init() context, no SMP, no
+# processes.  Commands that require process data (including stack or
+# registers) are not reliable this early.  set and bp commands should
+# be safe.  Global breakpoint commands affect each cpu as it is booted.
+
+# Standard debugging information for first level support, just type archkdb
+# or archkdbcpu or archkdbshort at the kdb prompt.
+
+defcmd dumpcommon "" "Common kdb debugging"
+  set BTAPROMPT 0
+  set LINES 10000
+  -summary
+  -cpu
+  -ps
+  -dmesg 600
+  -bt
+endefcmd
+
+defcmd dumpall "" "First line debugging"
+  set BTSYMARG 1
+  set BTARGS 9
+  pid R
+  -dumpcommon
+  -bta
+endefcmd
+
+defcmd dumpcpu "" "Same as dumpall but only tasks on cpus"
+  set BTSYMARG 1
+  set BTARGS 9
+  pid R
+  -dumpcommon
+  -btc
+endefcmd
+
diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c
new file mode 100644
index 0000000..bf6e827
--- /dev/null
+++ b/kernel/debug/kdb/kdb_debugger.c
@@ -0,0 +1,169 @@
+/*
+ * Created by: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/kdebug.h>
+#include "kdb_private.h"
+#include "../debug_core.h"
+
+/*
+ * KDB interface to KGDB internals
+ */
+get_char_func kdb_poll_funcs[] = {
+	dbg_io_get_char,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(kdb_poll_funcs);
+
+int kdb_poll_idx = 1;
+EXPORT_SYMBOL_GPL(kdb_poll_idx);
+
+int kdb_stub(struct kgdb_state *ks)
+{
+	int error = 0;
+	kdb_bp_t *bp;
+	unsigned long addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs);
+	kdb_reason_t reason = KDB_REASON_OOPS;
+	kdb_dbtrap_t db_result = KDB_DB_NOBPT;
+	int i;
+
+	if (KDB_STATE(REENTRY)) {
+		reason = KDB_REASON_SWITCH;
+		KDB_STATE_CLEAR(REENTRY);
+		addr = instruction_pointer(ks->linux_regs);
+	}
+	ks->pass_exception = 0;
+	if (atomic_read(&kgdb_setting_breakpoint))
+		reason = KDB_REASON_KEYBOARD;
+
+	for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) {
+		if ((bp->bp_enabled) && (bp->bp_addr == addr)) {
+			reason = KDB_REASON_BREAK;
+			db_result = KDB_DB_BPT;
+			if (addr != instruction_pointer(ks->linux_regs))
+				kgdb_arch_set_pc(ks->linux_regs, addr);
+			break;
+		}
+	}
+	if (reason == KDB_REASON_BREAK || reason == KDB_REASON_SWITCH) {
+		for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) {
+			if (bp->bp_free)
+				continue;
+			if (bp->bp_addr == addr) {
+				bp->bp_delay = 1;
+				bp->bp_delayed = 1;
+	/*
+	 * SSBPT is set when the kernel debugger must single step a
+	 * task in order to re-establish an instruction breakpoint
+	 * which uses the instruction replacement mechanism.  It is
+	 * cleared by any action that removes the need to single-step
+	 * the breakpoint.
+	 */
+				reason = KDB_REASON_BREAK;
+				db_result = KDB_DB_BPT;
+				KDB_STATE_SET(SSBPT);
+				break;
+			}
+		}
+	}
+
+	if (reason != KDB_REASON_BREAK && ks->ex_vector == 0 &&
+		ks->signo == SIGTRAP) {
+		reason = KDB_REASON_SSTEP;
+		db_result = KDB_DB_BPT;
+	}
+	/* Set initial kdb state variables */
+	KDB_STATE_CLEAR(KGDB_TRANS);
+	kdb_initial_cpu = ks->cpu;
+	kdb_current_task = kgdb_info[ks->cpu].task;
+	kdb_current_regs = kgdb_info[ks->cpu].debuggerinfo;
+	/* Remove any breakpoints as needed by kdb and clear single step */
+	kdb_bp_remove();
+	KDB_STATE_CLEAR(DOING_SS);
+	KDB_STATE_CLEAR(DOING_SSB);
+	KDB_STATE_SET(PAGER);
+	/* zero out any offline cpu data */
+	for_each_present_cpu(i) {
+		if (!cpu_online(i)) {
+			kgdb_info[i].debuggerinfo = NULL;
+			kgdb_info[i].task = NULL;
+		}
+	}
+	if (ks->err_code == DIE_OOPS || reason == KDB_REASON_OOPS) {
+		ks->pass_exception = 1;
+		KDB_FLAG_SET(CATASTROPHIC);
+	}
+	kdb_initial_cpu = ks->cpu;
+	if (KDB_STATE(SSBPT) && reason == KDB_REASON_SSTEP) {
+		KDB_STATE_CLEAR(SSBPT);
+		KDB_STATE_CLEAR(DOING_SS);
+	} else {
+		/* Start kdb main loop */
+		error = kdb_main_loop(KDB_REASON_ENTER, reason,
+				      ks->err_code, db_result, ks->linux_regs);
+	}
+	/*
+	 * Upon exit from the kdb main loop setup break points and restart
+	 * the system based on the requested continue state
+	 */
+	kdb_initial_cpu = -1;
+	kdb_current_task = NULL;
+	kdb_current_regs = NULL;
+	KDB_STATE_CLEAR(PAGER);
+	kdbnearsym_cleanup();
+	if (error == KDB_CMD_KGDB) {
+		if (KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2)) {
+	/*
+	 * This inteface glue which allows kdb to transition in into
+	 * the gdb stub.  In order to do this the '?' or '' gdb serial
+	 * packet response is processed here.  And then control is
+	 * passed to the gdbstub.
+	 */
+			if (KDB_STATE(DOING_KGDB))
+				gdbstub_state(ks, "?");
+			else
+				gdbstub_state(ks, "");
+			KDB_STATE_CLEAR(DOING_KGDB);
+			KDB_STATE_CLEAR(DOING_KGDB2);
+		}
+		return DBG_PASS_EVENT;
+	}
+	kdb_bp_install(ks->linux_regs);
+	dbg_activate_sw_breakpoints();
+	/* Set the exit state to a single step or a continue */
+	if (KDB_STATE(DOING_SS))
+		gdbstub_state(ks, "s");
+	else
+		gdbstub_state(ks, "c");
+
+	KDB_FLAG_CLEAR(CATASTROPHIC);
+
+	/* Invoke arch specific exception handling prior to system resume */
+	kgdb_info[ks->cpu].ret_state = gdbstub_state(ks, "e");
+	if (ks->pass_exception)
+		kgdb_info[ks->cpu].ret_state = 1;
+	if (error == KDB_CMD_CPU) {
+		KDB_STATE_SET(REENTRY);
+		/*
+		 * Force clear the single step bit because kdb emulates this
+		 * differently vs the gdbstub
+		 */
+		kgdb_single_step = 0;
+		dbg_deactivate_sw_breakpoints();
+		return DBG_SWITCH_CPU_EVENT;
+	}
+	return kgdb_info[ks->cpu].ret_state;
+}
+
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
new file mode 100644
index 0000000..c9b7f4f9
--- /dev/null
+++ b/kernel/debug/kdb/kdb_io.c
@@ -0,0 +1,826 @@
+/*
+ * Kernel Debugger Architecture Independent Console I/O handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/nmi.h>
+#include <linux/delay.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/kallsyms.h>
+#include "kdb_private.h"
+
+#define CMD_BUFLEN 256
+char kdb_prompt_str[CMD_BUFLEN];
+
+int kdb_trap_printk;
+
+static void kgdb_transition_check(char *buffer)
+{
+	int slen = strlen(buffer);
+	if (strncmp(buffer, "$?#3f", slen) != 0 &&
+	    strncmp(buffer, "$qSupported#37", slen) != 0 &&
+	    strncmp(buffer, "+$qSupported#37", slen) != 0) {
+		KDB_STATE_SET(KGDB_TRANS);
+		kdb_printf("%s", buffer);
+	}
+}
+
+static int kdb_read_get_key(char *buffer, size_t bufsize)
+{
+#define ESCAPE_UDELAY 1000
+#define ESCAPE_DELAY (2*1000000/ESCAPE_UDELAY) /* 2 seconds worth of udelays */
+	char escape_data[5];	/* longest vt100 escape sequence is 4 bytes */
+	char *ped = escape_data;
+	int escape_delay = 0;
+	get_char_func *f, *f_escape = NULL;
+	int key;
+
+	for (f = &kdb_poll_funcs[0]; ; ++f) {
+		if (*f == NULL) {
+			/* Reset NMI watchdog once per poll loop */
+			touch_nmi_watchdog();
+			f = &kdb_poll_funcs[0];
+		}
+		if (escape_delay == 2) {
+			*ped = '\0';
+			ped = escape_data;
+			--escape_delay;
+		}
+		if (escape_delay == 1) {
+			key = *ped++;
+			if (!*ped)
+				--escape_delay;
+			break;
+		}
+		key = (*f)();
+		if (key == -1) {
+			if (escape_delay) {
+				udelay(ESCAPE_UDELAY);
+				--escape_delay;
+			}
+			continue;
+		}
+		if (bufsize <= 2) {
+			if (key == '\r')
+				key = '\n';
+			*buffer++ = key;
+			*buffer = '\0';
+			return -1;
+		}
+		if (escape_delay == 0 && key == '\e') {
+			escape_delay = ESCAPE_DELAY;
+			ped = escape_data;
+			f_escape = f;
+		}
+		if (escape_delay) {
+			*ped++ = key;
+			if (f_escape != f) {
+				escape_delay = 2;
+				continue;
+			}
+			if (ped - escape_data == 1) {
+				/* \e */
+				continue;
+			} else if (ped - escape_data == 2) {
+				/* \e<something> */
+				if (key != '[')
+					escape_delay = 2;
+				continue;
+			} else if (ped - escape_data == 3) {
+				/* \e[<something> */
+				int mapkey = 0;
+				switch (key) {
+				case 'A': /* \e[A, up arrow */
+					mapkey = 16;
+					break;
+				case 'B': /* \e[B, down arrow */
+					mapkey = 14;
+					break;
+				case 'C': /* \e[C, right arrow */
+					mapkey = 6;
+					break;
+				case 'D': /* \e[D, left arrow */
+					mapkey = 2;
+					break;
+				case '1': /* dropthrough */
+				case '3': /* dropthrough */
+				/* \e[<1,3,4>], may be home, del, end */
+				case '4':
+					mapkey = -1;
+					break;
+				}
+				if (mapkey != -1) {
+					if (mapkey > 0) {
+						escape_data[0] = mapkey;
+						escape_data[1] = '\0';
+					}
+					escape_delay = 2;
+				}
+				continue;
+			} else if (ped - escape_data == 4) {
+				/* \e[<1,3,4><something> */
+				int mapkey = 0;
+				if (key == '~') {
+					switch (escape_data[2]) {
+					case '1': /* \e[1~, home */
+						mapkey = 1;
+						break;
+					case '3': /* \e[3~, del */
+						mapkey = 4;
+						break;
+					case '4': /* \e[4~, end */
+						mapkey = 5;
+						break;
+					}
+				}
+				if (mapkey > 0) {
+					escape_data[0] = mapkey;
+					escape_data[1] = '\0';
+				}
+				escape_delay = 2;
+				continue;
+			}
+		}
+		break;	/* A key to process */
+	}
+	return key;
+}
+
+/*
+ * kdb_read
+ *
+ *	This function reads a string of characters, terminated by
+ *	a newline, or by reaching the end of the supplied buffer,
+ *	from the current kernel debugger console device.
+ * Parameters:
+ *	buffer	- Address of character buffer to receive input characters.
+ *	bufsize - size, in bytes, of the character buffer
+ * Returns:
+ *	Returns a pointer to the buffer containing the received
+ *	character string.  This string will be terminated by a
+ *	newline character.
+ * Locking:
+ *	No locks are required to be held upon entry to this
+ *	function.  It is not reentrant - it relies on the fact
+ *	that while kdb is running on only one "master debug" cpu.
+ * Remarks:
+ *
+ * The buffer size must be >= 2.  A buffer size of 2 means that the caller only
+ * wants a single key.
+ *
+ * An escape key could be the start of a vt100 control sequence such as \e[D
+ * (left arrow) or it could be a character in its own right.  The standard
+ * method for detecting the difference is to wait for 2 seconds to see if there
+ * are any other characters.  kdb is complicated by the lack of a timer service
+ * (interrupts are off), by multiple input sources and by the need to sometimes
+ * return after just one key.  Escape sequence processing has to be done as
+ * states in the polling loop.
+ */
+
+static char *kdb_read(char *buffer, size_t bufsize)
+{
+	char *cp = buffer;
+	char *bufend = buffer+bufsize-2;	/* Reserve space for newline
+						 * and null byte */
+	char *lastchar;
+	char *p_tmp;
+	char tmp;
+	static char tmpbuffer[CMD_BUFLEN];
+	int len = strlen(buffer);
+	int len_tmp;
+	int tab = 0;
+	int count;
+	int i;
+	int diag, dtab_count;
+	int key;
+
+
+	diag = kdbgetintenv("DTABCOUNT", &dtab_count);
+	if (diag)
+		dtab_count = 30;
+
+	if (len > 0) {
+		cp += len;
+		if (*(buffer+len-1) == '\n')
+			cp--;
+	}
+
+	lastchar = cp;
+	*cp = '\0';
+	kdb_printf("%s", buffer);
+poll_again:
+	key = kdb_read_get_key(buffer, bufsize);
+	if (key == -1)
+		return buffer;
+	if (key != 9)
+		tab = 0;
+	switch (key) {
+	case 8: /* backspace */
+		if (cp > buffer) {
+			if (cp < lastchar) {
+				memcpy(tmpbuffer, cp, lastchar - cp);
+				memcpy(cp-1, tmpbuffer, lastchar - cp);
+			}
+			*(--lastchar) = '\0';
+			--cp;
+			kdb_printf("\b%s \r", cp);
+			tmp = *cp;
+			*cp = '\0';
+			kdb_printf(kdb_prompt_str);
+			kdb_printf("%s", buffer);
+			*cp = tmp;
+		}
+		break;
+	case 13: /* enter */
+		*lastchar++ = '\n';
+		*lastchar++ = '\0';
+		kdb_printf("\n");
+		return buffer;
+	case 4: /* Del */
+		if (cp < lastchar) {
+			memcpy(tmpbuffer, cp+1, lastchar - cp - 1);
+			memcpy(cp, tmpbuffer, lastchar - cp - 1);
+			*(--lastchar) = '\0';
+			kdb_printf("%s \r", cp);
+			tmp = *cp;
+			*cp = '\0';
+			kdb_printf(kdb_prompt_str);
+			kdb_printf("%s", buffer);
+			*cp = tmp;
+		}
+		break;
+	case 1: /* Home */
+		if (cp > buffer) {
+			kdb_printf("\r");
+			kdb_printf(kdb_prompt_str);
+			cp = buffer;
+		}
+		break;
+	case 5: /* End */
+		if (cp < lastchar) {
+			kdb_printf("%s", cp);
+			cp = lastchar;
+		}
+		break;
+	case 2: /* Left */
+		if (cp > buffer) {
+			kdb_printf("\b");
+			--cp;
+		}
+		break;
+	case 14: /* Down */
+		memset(tmpbuffer, ' ',
+		       strlen(kdb_prompt_str) + (lastchar-buffer));
+		*(tmpbuffer+strlen(kdb_prompt_str) +
+		  (lastchar-buffer)) = '\0';
+		kdb_printf("\r%s\r", tmpbuffer);
+		*lastchar = (char)key;
+		*(lastchar+1) = '\0';
+		return lastchar;
+	case 6: /* Right */
+		if (cp < lastchar) {
+			kdb_printf("%c", *cp);
+			++cp;
+		}
+		break;
+	case 16: /* Up */
+		memset(tmpbuffer, ' ',
+		       strlen(kdb_prompt_str) + (lastchar-buffer));
+		*(tmpbuffer+strlen(kdb_prompt_str) +
+		  (lastchar-buffer)) = '\0';
+		kdb_printf("\r%s\r", tmpbuffer);
+		*lastchar = (char)key;
+		*(lastchar+1) = '\0';
+		return lastchar;
+	case 9: /* Tab */
+		if (tab < 2)
+			++tab;
+		p_tmp = buffer;
+		while (*p_tmp == ' ')
+			p_tmp++;
+		if (p_tmp > cp)
+			break;
+		memcpy(tmpbuffer, p_tmp, cp-p_tmp);
+		*(tmpbuffer + (cp-p_tmp)) = '\0';
+		p_tmp = strrchr(tmpbuffer, ' ');
+		if (p_tmp)
+			++p_tmp;
+		else
+			p_tmp = tmpbuffer;
+		len = strlen(p_tmp);
+		count = kallsyms_symbol_complete(p_tmp,
+						 sizeof(tmpbuffer) -
+						 (p_tmp - tmpbuffer));
+		if (tab == 2 && count > 0) {
+			kdb_printf("\n%d symbols are found.", count);
+			if (count > dtab_count) {
+				count = dtab_count;
+				kdb_printf(" But only first %d symbols will"
+					   " be printed.\nYou can change the"
+					   " environment variable DTABCOUNT.",
+					   count);
+			}
+			kdb_printf("\n");
+			for (i = 0; i < count; i++) {
+				if (kallsyms_symbol_next(p_tmp, i) < 0)
+					break;
+				kdb_printf("%s ", p_tmp);
+				*(p_tmp + len) = '\0';
+			}
+			if (i >= dtab_count)
+				kdb_printf("...");
+			kdb_printf("\n");
+			kdb_printf(kdb_prompt_str);
+			kdb_printf("%s", buffer);
+		} else if (tab != 2 && count > 0) {
+			len_tmp = strlen(p_tmp);
+			strncpy(p_tmp+len_tmp, cp, lastchar-cp+1);
+			len_tmp = strlen(p_tmp);
+			strncpy(cp, p_tmp+len, len_tmp-len + 1);
+			len = len_tmp - len;
+			kdb_printf("%s", cp);
+			cp += len;
+			lastchar += len;
+		}
+		kdb_nextline = 1; /* reset output line number */
+		break;
+	default:
+		if (key >= 32 && lastchar < bufend) {
+			if (cp < lastchar) {
+				memcpy(tmpbuffer, cp, lastchar - cp);
+				memcpy(cp+1, tmpbuffer, lastchar - cp);
+				*++lastchar = '\0';
+				*cp = key;
+				kdb_printf("%s\r", cp);
+				++cp;
+				tmp = *cp;
+				*cp = '\0';
+				kdb_printf(kdb_prompt_str);
+				kdb_printf("%s", buffer);
+				*cp = tmp;
+			} else {
+				*++lastchar = '\0';
+				*cp++ = key;
+				/* The kgdb transition check will hide
+				 * printed characters if we think that
+				 * kgdb is connecting, until the check
+				 * fails */
+				if (!KDB_STATE(KGDB_TRANS))
+					kgdb_transition_check(buffer);
+				else
+					kdb_printf("%c", key);
+			}
+			/* Special escape to kgdb */
+			if (lastchar - buffer >= 5 &&
+			    strcmp(lastchar - 5, "$?#3f") == 0) {
+				strcpy(buffer, "kgdb");
+				KDB_STATE_SET(DOING_KGDB);
+				return buffer;
+			}
+			if (lastchar - buffer >= 14 &&
+			    strcmp(lastchar - 14, "$qSupported#37") == 0) {
+				strcpy(buffer, "kgdb");
+				KDB_STATE_SET(DOING_KGDB2);
+				return buffer;
+			}
+		}
+		break;
+	}
+	goto poll_again;
+}
+
+/*
+ * kdb_getstr
+ *
+ *	Print the prompt string and read a command from the
+ *	input device.
+ *
+ * Parameters:
+ *	buffer	Address of buffer to receive command
+ *	bufsize Size of buffer in bytes
+ *	prompt	Pointer to string to use as prompt string
+ * Returns:
+ *	Pointer to command buffer.
+ * Locking:
+ *	None.
+ * Remarks:
+ *	For SMP kernels, the processor number will be
+ *	substituted for %d, %x or %o in the prompt.
+ */
+
+char *kdb_getstr(char *buffer, size_t bufsize, char *prompt)
+{
+	if (prompt && kdb_prompt_str != prompt)
+		strncpy(kdb_prompt_str, prompt, CMD_BUFLEN);
+	kdb_printf(kdb_prompt_str);
+	kdb_nextline = 1;	/* Prompt and input resets line number */
+	return kdb_read(buffer, bufsize);
+}
+
+/*
+ * kdb_input_flush
+ *
+ *	Get rid of any buffered console input.
+ *
+ * Parameters:
+ *	none
+ * Returns:
+ *	nothing
+ * Locking:
+ *	none
+ * Remarks:
+ *	Call this function whenever you want to flush input.  If there is any
+ *	outstanding input, it ignores all characters until there has been no
+ *	data for approximately 1ms.
+ */
+
+static void kdb_input_flush(void)
+{
+	get_char_func *f;
+	int res;
+	int flush_delay = 1;
+	while (flush_delay) {
+		flush_delay--;
+empty:
+		touch_nmi_watchdog();
+		for (f = &kdb_poll_funcs[0]; *f; ++f) {
+			res = (*f)();
+			if (res != -1) {
+				flush_delay = 1;
+				goto empty;
+			}
+		}
+		if (flush_delay)
+			mdelay(1);
+	}
+}
+
+/*
+ * kdb_printf
+ *
+ *	Print a string to the output device(s).
+ *
+ * Parameters:
+ *	printf-like format and optional args.
+ * Returns:
+ *	0
+ * Locking:
+ *	None.
+ * Remarks:
+ *	use 'kdbcons->write()' to avoid polluting 'log_buf' with
+ *	kdb output.
+ *
+ *  If the user is doing a cmd args | grep srch
+ *  then kdb_grepping_flag is set.
+ *  In that case we need to accumulate full lines (ending in \n) before
+ *  searching for the pattern.
+ */
+
+static char kdb_buffer[256];	/* A bit too big to go on stack */
+static char *next_avail = kdb_buffer;
+static int  size_avail;
+static int  suspend_grep;
+
+/*
+ * search arg1 to see if it contains arg2
+ * (kdmain.c provides flags for ^pat and pat$)
+ *
+ * return 1 for found, 0 for not found
+ */
+static int kdb_search_string(char *searched, char *searchfor)
+{
+	char firstchar, *cp;
+	int len1, len2;
+
+	/* not counting the newline at the end of "searched" */
+	len1 = strlen(searched)-1;
+	len2 = strlen(searchfor);
+	if (len1 < len2)
+		return 0;
+	if (kdb_grep_leading && kdb_grep_trailing && len1 != len2)
+		return 0;
+	if (kdb_grep_leading) {
+		if (!strncmp(searched, searchfor, len2))
+			return 1;
+	} else if (kdb_grep_trailing) {
+		if (!strncmp(searched+len1-len2, searchfor, len2))
+			return 1;
+	} else {
+		firstchar = *searchfor;
+		cp = searched;
+		while ((cp = strchr(cp, firstchar))) {
+			if (!strncmp(cp, searchfor, len2))
+				return 1;
+			cp++;
+		}
+	}
+	return 0;
+}
+
+int vkdb_printf(const char *fmt, va_list ap)
+{
+	int diag;
+	int linecount;
+	int logging, saved_loglevel = 0;
+	int saved_trap_printk;
+	int got_printf_lock = 0;
+	int retlen = 0;
+	int fnd, len;
+	char *cp, *cp2, *cphold = NULL, replaced_byte = ' ';
+	char *moreprompt = "more> ";
+	struct console *c = console_drivers;
+	static DEFINE_SPINLOCK(kdb_printf_lock);
+	unsigned long uninitialized_var(flags);
+
+	preempt_disable();
+	saved_trap_printk = kdb_trap_printk;
+	kdb_trap_printk = 0;
+
+	/* Serialize kdb_printf if multiple cpus try to write at once.
+	 * But if any cpu goes recursive in kdb, just print the output,
+	 * even if it is interleaved with any other text.
+	 */
+	if (!KDB_STATE(PRINTF_LOCK)) {
+		KDB_STATE_SET(PRINTF_LOCK);
+		spin_lock_irqsave(&kdb_printf_lock, flags);
+		got_printf_lock = 1;
+		atomic_inc(&kdb_event);
+	} else {
+		__acquire(kdb_printf_lock);
+	}
+
+	diag = kdbgetintenv("LINES", &linecount);
+	if (diag || linecount <= 1)
+		linecount = 24;
+
+	diag = kdbgetintenv("LOGGING", &logging);
+	if (diag)
+		logging = 0;
+
+	if (!kdb_grepping_flag || suspend_grep) {
+		/* normally, every vsnprintf starts a new buffer */
+		next_avail = kdb_buffer;
+		size_avail = sizeof(kdb_buffer);
+	}
+	vsnprintf(next_avail, size_avail, fmt, ap);
+
+	/*
+	 * If kdb_parse() found that the command was cmd xxx | grep yyy
+	 * then kdb_grepping_flag is set, and kdb_grep_string contains yyy
+	 *
+	 * Accumulate the print data up to a newline before searching it.
+	 * (vsnprintf does null-terminate the string that it generates)
+	 */
+
+	/* skip the search if prints are temporarily unconditional */
+	if (!suspend_grep && kdb_grepping_flag) {
+		cp = strchr(kdb_buffer, '\n');
+		if (!cp) {
+			/*
+			 * Special cases that don't end with newlines
+			 * but should be written without one:
+			 *   The "[nn]kdb> " prompt should
+			 *   appear at the front of the buffer.
+			 *
+			 *   The "[nn]more " prompt should also be
+			 *     (MOREPROMPT -> moreprompt)
+			 *   written *   but we print that ourselves,
+			 *   we set the suspend_grep flag to make
+			 *   it unconditional.
+			 *
+			 */
+			if (next_avail == kdb_buffer) {
+				/*
+				 * these should occur after a newline,
+				 * so they will be at the front of the
+				 * buffer
+				 */
+				cp2 = kdb_buffer;
+				len = strlen(kdb_prompt_str);
+				if (!strncmp(cp2, kdb_prompt_str, len)) {
+					/*
+					 * We're about to start a new
+					 * command, so we can go back
+					 * to normal mode.
+					 */
+					kdb_grepping_flag = 0;
+					goto kdb_printit;
+				}
+			}
+			/* no newline; don't search/write the buffer
+			   until one is there */
+			len = strlen(kdb_buffer);
+			next_avail = kdb_buffer + len;
+			size_avail = sizeof(kdb_buffer) - len;
+			goto kdb_print_out;
+		}
+
+		/*
+		 * The newline is present; print through it or discard
+		 * it, depending on the results of the search.
+		 */
+		cp++;	 	     /* to byte after the newline */
+		replaced_byte = *cp; /* remember what/where it was */
+		cphold = cp;
+		*cp = '\0';	     /* end the string for our search */
+
+		/*
+		 * We now have a newline at the end of the string
+		 * Only continue with this output if it contains the
+		 * search string.
+		 */
+		fnd = kdb_search_string(kdb_buffer, kdb_grep_string);
+		if (!fnd) {
+			/*
+			 * At this point the complete line at the start
+			 * of kdb_buffer can be discarded, as it does
+			 * not contain what the user is looking for.
+			 * Shift the buffer left.
+			 */
+			*cphold = replaced_byte;
+			strcpy(kdb_buffer, cphold);
+			len = strlen(kdb_buffer);
+			next_avail = kdb_buffer + len;
+			size_avail = sizeof(kdb_buffer) - len;
+			goto kdb_print_out;
+		}
+		/*
+		 * at this point the string is a full line and
+		 * should be printed, up to the null.
+		 */
+	}
+kdb_printit:
+
+	/*
+	 * Write to all consoles.
+	 */
+	retlen = strlen(kdb_buffer);
+	if (!dbg_kdb_mode && kgdb_connected) {
+		gdbstub_msg_write(kdb_buffer, retlen);
+	} else {
+		if (!dbg_io_ops->is_console) {
+			len = strlen(kdb_buffer);
+			cp = kdb_buffer;
+			while (len--) {
+				dbg_io_ops->write_char(*cp);
+				cp++;
+			}
+		}
+		while (c) {
+			c->write(c, kdb_buffer, retlen);
+			touch_nmi_watchdog();
+			c = c->next;
+		}
+	}
+	if (logging) {
+		saved_loglevel = console_loglevel;
+		console_loglevel = 0;
+		printk(KERN_INFO "%s", kdb_buffer);
+	}
+
+	if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n'))
+		kdb_nextline++;
+
+	/* check for having reached the LINES number of printed lines */
+	if (kdb_nextline == linecount) {
+		char buf1[16] = "";
+#if defined(CONFIG_SMP)
+		char buf2[32];
+#endif
+
+		/* Watch out for recursion here.  Any routine that calls
+		 * kdb_printf will come back through here.  And kdb_read
+		 * uses kdb_printf to echo on serial consoles ...
+		 */
+		kdb_nextline = 1;	/* In case of recursion */
+
+		/*
+		 * Pause until cr.
+		 */
+		moreprompt = kdbgetenv("MOREPROMPT");
+		if (moreprompt == NULL)
+			moreprompt = "more> ";
+
+#if defined(CONFIG_SMP)
+		if (strchr(moreprompt, '%')) {
+			sprintf(buf2, moreprompt, get_cpu());
+			put_cpu();
+			moreprompt = buf2;
+		}
+#endif
+
+		kdb_input_flush();
+		c = console_drivers;
+
+		if (!dbg_io_ops->is_console) {
+			len = strlen(moreprompt);
+			cp = moreprompt;
+			while (len--) {
+				dbg_io_ops->write_char(*cp);
+				cp++;
+			}
+		}
+		while (c) {
+			c->write(c, moreprompt, strlen(moreprompt));
+			touch_nmi_watchdog();
+			c = c->next;
+		}
+
+		if (logging)
+			printk("%s", moreprompt);
+
+		kdb_read(buf1, 2); /* '2' indicates to return
+				    * immediately after getting one key. */
+		kdb_nextline = 1;	/* Really set output line 1 */
+
+		/* empty and reset the buffer: */
+		kdb_buffer[0] = '\0';
+		next_avail = kdb_buffer;
+		size_avail = sizeof(kdb_buffer);
+		if ((buf1[0] == 'q') || (buf1[0] == 'Q')) {
+			/* user hit q or Q */
+			KDB_FLAG_SET(CMD_INTERRUPT); /* command interrupted */
+			KDB_STATE_CLEAR(PAGER);
+			/* end of command output; back to normal mode */
+			kdb_grepping_flag = 0;
+			kdb_printf("\n");
+		} else if (buf1[0] == ' ') {
+			kdb_printf("\n");
+			suspend_grep = 1; /* for this recursion */
+		} else if (buf1[0] == '\n') {
+			kdb_nextline = linecount - 1;
+			kdb_printf("\r");
+			suspend_grep = 1; /* for this recursion */
+		} else if (buf1[0] && buf1[0] != '\n') {
+			/* user hit something other than enter */
+			suspend_grep = 1; /* for this recursion */
+			kdb_printf("\nOnly 'q' or 'Q' are processed at more "
+				   "prompt, input ignored\n");
+		} else if (kdb_grepping_flag) {
+			/* user hit enter */
+			suspend_grep = 1; /* for this recursion */
+			kdb_printf("\n");
+		}
+		kdb_input_flush();
+	}
+
+	/*
+	 * For grep searches, shift the printed string left.
+	 *  replaced_byte contains the character that was overwritten with
+	 *  the terminating null, and cphold points to the null.
+	 * Then adjust the notion of available space in the buffer.
+	 */
+	if (kdb_grepping_flag && !suspend_grep) {
+		*cphold = replaced_byte;
+		strcpy(kdb_buffer, cphold);
+		len = strlen(kdb_buffer);
+		next_avail = kdb_buffer + len;
+		size_avail = sizeof(kdb_buffer) - len;
+	}
+
+kdb_print_out:
+	suspend_grep = 0; /* end of what may have been a recursive call */
+	if (logging)
+		console_loglevel = saved_loglevel;
+	if (KDB_STATE(PRINTF_LOCK) && got_printf_lock) {
+		got_printf_lock = 0;
+		spin_unlock_irqrestore(&kdb_printf_lock, flags);
+		KDB_STATE_CLEAR(PRINTF_LOCK);
+		atomic_dec(&kdb_event);
+	} else {
+		__release(kdb_printf_lock);
+	}
+	kdb_trap_printk = saved_trap_printk;
+	preempt_enable();
+	return retlen;
+}
+
+int kdb_printf(const char *fmt, ...)
+{
+	va_list ap;
+	int r;
+
+	va_start(ap, fmt);
+	r = vkdb_printf(fmt, ap);
+	va_end(ap);
+
+	return r;
+}
+
diff --git a/kernel/debug/kdb/kdb_keyboard.c b/kernel/debug/kdb/kdb_keyboard.c
new file mode 100644
index 0000000..4bca634
--- /dev/null
+++ b/kernel/debug/kdb/kdb_keyboard.c
@@ -0,0 +1,212 @@
+/*
+ * Kernel Debugger Architecture Dependent Console I/O handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ *
+ * Copyright (c) 1999-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kdb.h>
+#include <linux/keyboard.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+/* Keyboard Controller Registers on normal PCs. */
+
+#define KBD_STATUS_REG		0x64	/* Status register (R) */
+#define KBD_DATA_REG		0x60	/* Keyboard data register (R/W) */
+
+/* Status Register Bits */
+
+#define KBD_STAT_OBF 		0x01	/* Keyboard output buffer full */
+#define KBD_STAT_MOUSE_OBF	0x20	/* Mouse output buffer full */
+
+static int kbd_exists;
+
+/*
+ * Check if the keyboard controller has a keypress for us.
+ * Some parts (Enter Release, LED change) are still blocking polled here,
+ * but hopefully they are all short.
+ */
+int kdb_get_kbd_char(void)
+{
+	int scancode, scanstatus;
+	static int shift_lock;	/* CAPS LOCK state (0-off, 1-on) */
+	static int shift_key;	/* Shift next keypress */
+	static int ctrl_key;
+	u_short keychar;
+
+	if (KDB_FLAG(NO_I8042) || KDB_FLAG(NO_VT_CONSOLE) ||
+	    (inb(KBD_STATUS_REG) == 0xff && inb(KBD_DATA_REG) == 0xff)) {
+		kbd_exists = 0;
+		return -1;
+	}
+	kbd_exists = 1;
+
+	if ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0)
+		return -1;
+
+	/*
+	 * Fetch the scancode
+	 */
+	scancode = inb(KBD_DATA_REG);
+	scanstatus = inb(KBD_STATUS_REG);
+
+	/*
+	 * Ignore mouse events.
+	 */
+	if (scanstatus & KBD_STAT_MOUSE_OBF)
+		return -1;
+
+	/*
+	 * Ignore release, trigger on make
+	 * (except for shift keys, where we want to
+	 *  keep the shift state so long as the key is
+	 *  held down).
+	 */
+
+	if (((scancode&0x7f) == 0x2a) || ((scancode&0x7f) == 0x36)) {
+		/*
+		 * Next key may use shift table
+		 */
+		if ((scancode & 0x80) == 0)
+			shift_key = 1;
+		else
+			shift_key = 0;
+		return -1;
+	}
+
+	if ((scancode&0x7f) == 0x1d) {
+		/*
+		 * Left ctrl key
+		 */
+		if ((scancode & 0x80) == 0)
+			ctrl_key = 1;
+		else
+			ctrl_key = 0;
+		return -1;
+	}
+
+	if ((scancode & 0x80) != 0)
+		return -1;
+
+	scancode &= 0x7f;
+
+	/*
+	 * Translate scancode
+	 */
+
+	if (scancode == 0x3a) {
+		/*
+		 * Toggle caps lock
+		 */
+		shift_lock ^= 1;
+
+#ifdef	KDB_BLINK_LED
+		kdb_toggleled(0x4);
+#endif
+		return -1;
+	}
+
+	if (scancode == 0x0e) {
+		/*
+		 * Backspace
+		 */
+		return 8;
+	}
+
+	/* Special Key */
+	switch (scancode) {
+	case 0xF: /* Tab */
+		return 9;
+	case 0x53: /* Del */
+		return 4;
+	case 0x47: /* Home */
+		return 1;
+	case 0x4F: /* End */
+		return 5;
+	case 0x4B: /* Left */
+		return 2;
+	case 0x48: /* Up */
+		return 16;
+	case 0x50: /* Down */
+		return 14;
+	case 0x4D: /* Right */
+		return 6;
+	}
+
+	if (scancode == 0xe0)
+		return -1;
+
+	/*
+	 * For Japanese 86/106 keyboards
+	 * 	See comment in drivers/char/pc_keyb.c.
+	 * 	- Masahiro Adegawa
+	 */
+	if (scancode == 0x73)
+		scancode = 0x59;
+	else if (scancode == 0x7d)
+		scancode = 0x7c;
+
+	if (!shift_lock && !shift_key && !ctrl_key) {
+		keychar = plain_map[scancode];
+	} else if ((shift_lock || shift_key) && key_maps[1]) {
+		keychar = key_maps[1][scancode];
+	} else if (ctrl_key && key_maps[4]) {
+		keychar = key_maps[4][scancode];
+	} else {
+		keychar = 0x0020;
+		kdb_printf("Unknown state/scancode (%d)\n", scancode);
+	}
+	keychar &= 0x0fff;
+	if (keychar == '\t')
+		keychar = ' ';
+	switch (KTYP(keychar)) {
+	case KT_LETTER:
+	case KT_LATIN:
+		if (isprint(keychar))
+			break;		/* printable characters */
+		/* drop through */
+	case KT_SPEC:
+		if (keychar == K_ENTER)
+			break;
+		/* drop through */
+	default:
+		return -1;	/* ignore unprintables */
+	}
+
+	if ((scancode & 0x7f) == 0x1c) {
+		/*
+		 * enter key.  All done.  Absorb the release scancode.
+		 */
+		while ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0)
+			;
+
+		/*
+		 * Fetch the scancode
+		 */
+		scancode = inb(KBD_DATA_REG);
+		scanstatus = inb(KBD_STATUS_REG);
+
+		while (scanstatus & KBD_STAT_MOUSE_OBF) {
+			scancode = inb(KBD_DATA_REG);
+			scanstatus = inb(KBD_STATUS_REG);
+		}
+
+		if (scancode != 0x9c) {
+			/*
+			 * Wasn't an enter-release,  why not?
+			 */
+			kdb_printf("kdb: expected enter got 0x%x status 0x%x\n",
+			       scancode, scanstatus);
+		}
+
+		return 13;
+	}
+
+	return keychar & 0xff;
+}
+EXPORT_SYMBOL_GPL(kdb_get_kbd_char);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
new file mode 100644
index 0000000..b724c79
--- /dev/null
+++ b/kernel/debug/kdb/kdb_main.c
@@ -0,0 +1,2849 @@
+/*
+ * Kernel Debugger Architecture Independent Main Code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com>
+ * Xscale (R) modifications copyright (C) 2003 Intel Corporation.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/utsname.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kallsyms.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nmi.h>
+#include <linux/time.h>
+#include <linux/ptrace.h>
+#include <linux/sysctl.h>
+#include <linux/cpu.h>
+#include <linux/kdebug.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include "kdb_private.h"
+
+#define GREP_LEN 256
+char kdb_grep_string[GREP_LEN];
+int kdb_grepping_flag;
+EXPORT_SYMBOL(kdb_grepping_flag);
+int kdb_grep_leading;
+int kdb_grep_trailing;
+
+/*
+ * Kernel debugger state flags
+ */
+int kdb_flags;
+atomic_t kdb_event;
+
+/*
+ * kdb_lock protects updates to kdb_initial_cpu.  Used to
+ * single thread processors through the kernel debugger.
+ */
+int kdb_initial_cpu = -1;	/* cpu number that owns kdb */
+int kdb_nextline = 1;
+int kdb_state;			/* General KDB state */
+
+struct task_struct *kdb_current_task;
+EXPORT_SYMBOL(kdb_current_task);
+struct pt_regs *kdb_current_regs;
+
+const char *kdb_diemsg;
+static int kdb_go_count;
+#ifdef CONFIG_KDB_CONTINUE_CATASTROPHIC
+static unsigned int kdb_continue_catastrophic =
+	CONFIG_KDB_CONTINUE_CATASTROPHIC;
+#else
+static unsigned int kdb_continue_catastrophic;
+#endif
+
+/* kdb_commands describes the available commands. */
+static kdbtab_t *kdb_commands;
+#define KDB_BASE_CMD_MAX 50
+static int kdb_max_commands = KDB_BASE_CMD_MAX;
+static kdbtab_t kdb_base_commands[50];
+#define for_each_kdbcmd(cmd, num)					\
+	for ((cmd) = kdb_base_commands, (num) = 0;			\
+	     num < kdb_max_commands;					\
+	     num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++)
+
+typedef struct _kdbmsg {
+	int	km_diag;	/* kdb diagnostic */
+	char	*km_msg;	/* Corresponding message text */
+} kdbmsg_t;
+
+#define KDBMSG(msgnum, text) \
+	{ KDB_##msgnum, text }
+
+static kdbmsg_t kdbmsgs[] = {
+	KDBMSG(NOTFOUND, "Command Not Found"),
+	KDBMSG(ARGCOUNT, "Improper argument count, see usage."),
+	KDBMSG(BADWIDTH, "Illegal value for BYTESPERWORD use 1, 2, 4 or 8, "
+	       "8 is only allowed on 64 bit systems"),
+	KDBMSG(BADRADIX, "Illegal value for RADIX use 8, 10 or 16"),
+	KDBMSG(NOTENV, "Cannot find environment variable"),
+	KDBMSG(NOENVVALUE, "Environment variable should have value"),
+	KDBMSG(NOTIMP, "Command not implemented"),
+	KDBMSG(ENVFULL, "Environment full"),
+	KDBMSG(ENVBUFFULL, "Environment buffer full"),
+	KDBMSG(TOOMANYBPT, "Too many breakpoints defined"),
+#ifdef CONFIG_CPU_XSCALE
+	KDBMSG(TOOMANYDBREGS, "More breakpoints than ibcr registers defined"),
+#else
+	KDBMSG(TOOMANYDBREGS, "More breakpoints than db registers defined"),
+#endif
+	KDBMSG(DUPBPT, "Duplicate breakpoint address"),
+	KDBMSG(BPTNOTFOUND, "Breakpoint not found"),
+	KDBMSG(BADMODE, "Invalid IDMODE"),
+	KDBMSG(BADINT, "Illegal numeric value"),
+	KDBMSG(INVADDRFMT, "Invalid symbolic address format"),
+	KDBMSG(BADREG, "Invalid register name"),
+	KDBMSG(BADCPUNUM, "Invalid cpu number"),
+	KDBMSG(BADLENGTH, "Invalid length field"),
+	KDBMSG(NOBP, "No Breakpoint exists"),
+	KDBMSG(BADADDR, "Invalid address"),
+};
+#undef KDBMSG
+
+static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t);
+
+
+/*
+ * Initial environment.   This is all kept static and local to
+ * this file.   We don't want to rely on the memory allocation
+ * mechanisms in the kernel, so we use a very limited allocate-only
+ * heap for new and altered environment variables.  The entire
+ * environment is limited to a fixed number of entries (add more
+ * to __env[] if required) and a fixed amount of heap (add more to
+ * KDB_ENVBUFSIZE if required).
+ */
+
+static char *__env[] = {
+#if defined(CONFIG_SMP)
+ "PROMPT=[%d]kdb> ",
+ "MOREPROMPT=[%d]more> ",
+#else
+ "PROMPT=kdb> ",
+ "MOREPROMPT=more> ",
+#endif
+ "RADIX=16",
+ "MDCOUNT=8",			/* lines of md output */
+ "BTARGS=9",			/* 9 possible args in bt */
+ KDB_PLATFORM_ENV,
+ "DTABCOUNT=30",
+ "NOSECT=1",
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+ (char *)0,
+};
+
+static const int __nenv = (sizeof(__env) / sizeof(char *));
+
+struct task_struct *kdb_curr_task(int cpu)
+{
+	struct task_struct *p = curr_task(cpu);
+#ifdef	_TIF_MCA_INIT
+	if ((task_thread_info(p)->flags & _TIF_MCA_INIT) && KDB_TSK(cpu))
+		p = krp->p;
+#endif
+	return p;
+}
+
+/*
+ * kdbgetenv - This function will return the character string value of
+ *	an environment variable.
+ * Parameters:
+ *	match	A character string representing an environment variable.
+ * Returns:
+ *	NULL	No environment variable matches 'match'
+ *	char*	Pointer to string value of environment variable.
+ */
+char *kdbgetenv(const char *match)
+{
+	char **ep = __env;
+	int matchlen = strlen(match);
+	int i;
+
+	for (i = 0; i < __nenv; i++) {
+		char *e = *ep++;
+
+		if (!e)
+			continue;
+
+		if ((strncmp(match, e, matchlen) == 0)
+		 && ((e[matchlen] == '\0')
+		   || (e[matchlen] == '='))) {
+			char *cp = strchr(e, '=');
+			return cp ? ++cp : "";
+		}
+	}
+	return NULL;
+}
+
+/*
+ * kdballocenv - This function is used to allocate bytes for
+ *	environment entries.
+ * Parameters:
+ *	match	A character string representing a numeric value
+ * Outputs:
+ *	*value  the unsigned long representation of the env variable 'match'
+ * Returns:
+ *	Zero on success, a kdb diagnostic on failure.
+ * Remarks:
+ *	We use a static environment buffer (envbuffer) to hold the values
+ *	of dynamically generated environment variables (see kdb_set).  Buffer
+ *	space once allocated is never free'd, so over time, the amount of space
+ *	(currently 512 bytes) will be exhausted if env variables are changed
+ *	frequently.
+ */
+static char *kdballocenv(size_t bytes)
+{
+#define	KDB_ENVBUFSIZE	512
+	static char envbuffer[KDB_ENVBUFSIZE];
+	static int envbufsize;
+	char *ep = NULL;
+
+	if ((KDB_ENVBUFSIZE - envbufsize) >= bytes) {
+		ep = &envbuffer[envbufsize];
+		envbufsize += bytes;
+	}
+	return ep;
+}
+
+/*
+ * kdbgetulenv - This function will return the value of an unsigned
+ *	long-valued environment variable.
+ * Parameters:
+ *	match	A character string representing a numeric value
+ * Outputs:
+ *	*value  the unsigned long represntation of the env variable 'match'
+ * Returns:
+ *	Zero on success, a kdb diagnostic on failure.
+ */
+static int kdbgetulenv(const char *match, unsigned long *value)
+{
+	char *ep;
+
+	ep = kdbgetenv(match);
+	if (!ep)
+		return KDB_NOTENV;
+	if (strlen(ep) == 0)
+		return KDB_NOENVVALUE;
+
+	*value = simple_strtoul(ep, NULL, 0);
+
+	return 0;
+}
+
+/*
+ * kdbgetintenv - This function will return the value of an
+ *	integer-valued environment variable.
+ * Parameters:
+ *	match	A character string representing an integer-valued env variable
+ * Outputs:
+ *	*value  the integer representation of the environment variable 'match'
+ * Returns:
+ *	Zero on success, a kdb diagnostic on failure.
+ */
+int kdbgetintenv(const char *match, int *value)
+{
+	unsigned long val;
+	int diag;
+
+	diag = kdbgetulenv(match, &val);
+	if (!diag)
+		*value = (int) val;
+	return diag;
+}
+
+/*
+ * kdbgetularg - This function will convert a numeric string into an
+ *	unsigned long value.
+ * Parameters:
+ *	arg	A character string representing a numeric value
+ * Outputs:
+ *	*value  the unsigned long represntation of arg.
+ * Returns:
+ *	Zero on success, a kdb diagnostic on failure.
+ */
+int kdbgetularg(const char *arg, unsigned long *value)
+{
+	char *endp;
+	unsigned long val;
+
+	val = simple_strtoul(arg, &endp, 0);
+
+	if (endp == arg) {
+		/*
+		 * Try base 16, for us folks too lazy to type the
+		 * leading 0x...
+		 */
+		val = simple_strtoul(arg, &endp, 16);
+		if (endp == arg)
+			return KDB_BADINT;
+	}
+
+	*value = val;
+
+	return 0;
+}
+
+/*
+ * kdb_set - This function implements the 'set' command.  Alter an
+ *	existing environment variable or create a new one.
+ */
+int kdb_set(int argc, const char **argv)
+{
+	int i;
+	char *ep;
+	size_t varlen, vallen;
+
+	/*
+	 * we can be invoked two ways:
+	 *   set var=value    argv[1]="var", argv[2]="value"
+	 *   set var = value  argv[1]="var", argv[2]="=", argv[3]="value"
+	 * - if the latter, shift 'em down.
+	 */
+	if (argc == 3) {
+		argv[2] = argv[3];
+		argc--;
+	}
+
+	if (argc != 2)
+		return KDB_ARGCOUNT;
+
+	/*
+	 * Check for internal variables
+	 */
+	if (strcmp(argv[1], "KDBDEBUG") == 0) {
+		unsigned int debugflags;
+		char *cp;
+
+		debugflags = simple_strtoul(argv[2], &cp, 0);
+		if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) {
+			kdb_printf("kdb: illegal debug flags '%s'\n",
+				    argv[2]);
+			return 0;
+		}
+		kdb_flags = (kdb_flags &
+			     ~(KDB_DEBUG_FLAG_MASK << KDB_DEBUG_FLAG_SHIFT))
+			| (debugflags << KDB_DEBUG_FLAG_SHIFT);
+
+		return 0;
+	}
+
+	/*
+	 * Tokenizer squashed the '=' sign.  argv[1] is variable
+	 * name, argv[2] = value.
+	 */
+	varlen = strlen(argv[1]);
+	vallen = strlen(argv[2]);
+	ep = kdballocenv(varlen + vallen + 2);
+	if (ep == (char *)0)
+		return KDB_ENVBUFFULL;
+
+	sprintf(ep, "%s=%s", argv[1], argv[2]);
+
+	ep[varlen+vallen+1] = '\0';
+
+	for (i = 0; i < __nenv; i++) {
+		if (__env[i]
+		 && ((strncmp(__env[i], argv[1], varlen) == 0)
+		   && ((__env[i][varlen] == '\0')
+		    || (__env[i][varlen] == '=')))) {
+			__env[i] = ep;
+			return 0;
+		}
+	}
+
+	/*
+	 * Wasn't existing variable.  Fit into slot.
+	 */
+	for (i = 0; i < __nenv-1; i++) {
+		if (__env[i] == (char *)0) {
+			__env[i] = ep;
+			return 0;
+		}
+	}
+
+	return KDB_ENVFULL;
+}
+
+static int kdb_check_regs(void)
+{
+	if (!kdb_current_regs) {
+		kdb_printf("No current kdb registers."
+			   "  You may need to select another task\n");
+		return KDB_BADREG;
+	}
+	return 0;
+}
+
+/*
+ * kdbgetaddrarg - This function is responsible for parsing an
+ *	address-expression and returning the value of the expression,
+ *	symbol name, and offset to the caller.
+ *
+ *	The argument may consist of a numeric value (decimal or
+ *	hexidecimal), a symbol name, a register name (preceeded by the
+ *	percent sign), an environment variable with a numeric value
+ *	(preceeded by a dollar sign) or a simple arithmetic expression
+ *	consisting of a symbol name, +/-, and a numeric constant value
+ *	(offset).
+ * Parameters:
+ *	argc	- count of arguments in argv
+ *	argv	- argument vector
+ *	*nextarg - index to next unparsed argument in argv[]
+ *	regs	- Register state at time of KDB entry
+ * Outputs:
+ *	*value	- receives the value of the address-expression
+ *	*offset - receives the offset specified, if any
+ *	*name   - receives the symbol name, if any
+ *	*nextarg - index to next unparsed argument in argv[]
+ * Returns:
+ *	zero is returned on success, a kdb diagnostic code is
+ *      returned on error.
+ */
+int kdbgetaddrarg(int argc, const char **argv, int *nextarg,
+		  unsigned long *value,  long *offset,
+		  char **name)
+{
+	unsigned long addr;
+	unsigned long off = 0;
+	int positive;
+	int diag;
+	int found = 0;
+	char *symname;
+	char symbol = '\0';
+	char *cp;
+	kdb_symtab_t symtab;
+
+	/*
+	 * Process arguments which follow the following syntax:
+	 *
+	 *  symbol | numeric-address [+/- numeric-offset]
+	 *  %register
+	 *  $environment-variable
+	 */
+
+	if (*nextarg > argc)
+		return KDB_ARGCOUNT;
+
+	symname = (char *)argv[*nextarg];
+
+	/*
+	 * If there is no whitespace between the symbol
+	 * or address and the '+' or '-' symbols, we
+	 * remember the character and replace it with a
+	 * null so the symbol/value can be properly parsed
+	 */
+	cp = strpbrk(symname, "+-");
+	if (cp != NULL) {
+		symbol = *cp;
+		*cp++ = '\0';
+	}
+
+	if (symname[0] == '$') {
+		diag = kdbgetulenv(&symname[1], &addr);
+		if (diag)
+			return diag;
+	} else if (symname[0] == '%') {
+		diag = kdb_check_regs();
+		if (diag)
+			return diag;
+		/* Implement register values with % at a later time as it is
+		 * arch optional.
+		 */
+		return KDB_NOTIMP;
+	} else {
+		found = kdbgetsymval(symname, &symtab);
+		if (found) {
+			addr = symtab.sym_start;
+		} else {
+			diag = kdbgetularg(argv[*nextarg], &addr);
+			if (diag)
+				return diag;
+		}
+	}
+
+	if (!found)
+		found = kdbnearsym(addr, &symtab);
+
+	(*nextarg)++;
+
+	if (name)
+		*name = symname;
+	if (value)
+		*value = addr;
+	if (offset && name && *name)
+		*offset = addr - symtab.sym_start;
+
+	if ((*nextarg > argc)
+	 && (symbol == '\0'))
+		return 0;
+
+	/*
+	 * check for +/- and offset
+	 */
+
+	if (symbol == '\0') {
+		if ((argv[*nextarg][0] != '+')
+		 && (argv[*nextarg][0] != '-')) {
+			/*
+			 * Not our argument.  Return.
+			 */
+			return 0;
+		} else {
+			positive = (argv[*nextarg][0] == '+');
+			(*nextarg)++;
+		}
+	} else
+		positive = (symbol == '+');
+
+	/*
+	 * Now there must be an offset!
+	 */
+	if ((*nextarg > argc)
+	 && (symbol == '\0')) {
+		return KDB_INVADDRFMT;
+	}
+
+	if (!symbol) {
+		cp = (char *)argv[*nextarg];
+		(*nextarg)++;
+	}
+
+	diag = kdbgetularg(cp, &off);
+	if (diag)
+		return diag;
+
+	if (!positive)
+		off = -off;
+
+	if (offset)
+		*offset += off;
+
+	if (value)
+		*value += off;
+
+	return 0;
+}
+
+static void kdb_cmderror(int diag)
+{
+	int i;
+
+	if (diag >= 0) {
+		kdb_printf("no error detected (diagnostic is %d)\n", diag);
+		return;
+	}
+
+	for (i = 0; i < __nkdb_err; i++) {
+		if (kdbmsgs[i].km_diag == diag) {
+			kdb_printf("diag: %d: %s\n", diag, kdbmsgs[i].km_msg);
+			return;
+		}
+	}
+
+	kdb_printf("Unknown diag %d\n", -diag);
+}
+
+/*
+ * kdb_defcmd, kdb_defcmd2 - This function implements the 'defcmd'
+ *	command which defines one command as a set of other commands,
+ *	terminated by endefcmd.  kdb_defcmd processes the initial
+ *	'defcmd' command, kdb_defcmd2 is invoked from kdb_parse for
+ *	the following commands until 'endefcmd'.
+ * Inputs:
+ *	argc	argument count
+ *	argv	argument vector
+ * Returns:
+ *	zero for success, a kdb diagnostic if error
+ */
+struct defcmd_set {
+	int count;
+	int usable;
+	char *name;
+	char *usage;
+	char *help;
+	char **command;
+};
+static struct defcmd_set *defcmd_set;
+static int defcmd_set_count;
+static int defcmd_in_progress;
+
+/* Forward references */
+static int kdb_exec_defcmd(int argc, const char **argv);
+
+static int kdb_defcmd2(const char *cmdstr, const char *argv0)
+{
+	struct defcmd_set *s = defcmd_set + defcmd_set_count - 1;
+	char **save_command = s->command;
+	if (strcmp(argv0, "endefcmd") == 0) {
+		defcmd_in_progress = 0;
+		if (!s->count)
+			s->usable = 0;
+		if (s->usable)
+			kdb_register(s->name, kdb_exec_defcmd,
+				     s->usage, s->help, 0);
+		return 0;
+	}
+	if (!s->usable)
+		return KDB_NOTIMP;
+	s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
+	if (!s->command) {
+		kdb_printf("Could not allocate new kdb_defcmd table for %s\n",
+			   cmdstr);
+		s->usable = 0;
+		return KDB_NOTIMP;
+	}
+	memcpy(s->command, save_command, s->count * sizeof(*(s->command)));
+	s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB);
+	kfree(save_command);
+	return 0;
+}
+
+static int kdb_defcmd(int argc, const char **argv)
+{
+	struct defcmd_set *save_defcmd_set = defcmd_set, *s;
+	if (defcmd_in_progress) {
+		kdb_printf("kdb: nested defcmd detected, assuming missing "
+			   "endefcmd\n");
+		kdb_defcmd2("endefcmd", "endefcmd");
+	}
+	if (argc == 0) {
+		int i;
+		for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) {
+			kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name,
+				   s->usage, s->help);
+			for (i = 0; i < s->count; ++i)
+				kdb_printf("%s", s->command[i]);
+			kdb_printf("endefcmd\n");
+		}
+		return 0;
+	}
+	if (argc != 3)
+		return KDB_ARGCOUNT;
+	defcmd_set = kmalloc((defcmd_set_count + 1) * sizeof(*defcmd_set),
+			     GFP_KDB);
+	if (!defcmd_set) {
+		kdb_printf("Could not allocate new defcmd_set entry for %s\n",
+			   argv[1]);
+		defcmd_set = save_defcmd_set;
+		return KDB_NOTIMP;
+	}
+	memcpy(defcmd_set, save_defcmd_set,
+	       defcmd_set_count * sizeof(*defcmd_set));
+	kfree(save_defcmd_set);
+	s = defcmd_set + defcmd_set_count;
+	memset(s, 0, sizeof(*s));
+	s->usable = 1;
+	s->name = kdb_strdup(argv[1], GFP_KDB);
+	s->usage = kdb_strdup(argv[2], GFP_KDB);
+	s->help = kdb_strdup(argv[3], GFP_KDB);
+	if (s->usage[0] == '"') {
+		strcpy(s->usage, s->usage+1);
+		s->usage[strlen(s->usage)-1] = '\0';
+	}
+	if (s->help[0] == '"') {
+		strcpy(s->help, s->help+1);
+		s->help[strlen(s->help)-1] = '\0';
+	}
+	++defcmd_set_count;
+	defcmd_in_progress = 1;
+	return 0;
+}
+
+/*
+ * kdb_exec_defcmd - Execute the set of commands associated with this
+ *	defcmd name.
+ * Inputs:
+ *	argc	argument count
+ *	argv	argument vector
+ * Returns:
+ *	zero for success, a kdb diagnostic if error
+ */
+static int kdb_exec_defcmd(int argc, const char **argv)
+{
+	int i, ret;
+	struct defcmd_set *s;
+	if (argc != 0)
+		return KDB_ARGCOUNT;
+	for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) {
+		if (strcmp(s->name, argv[0]) == 0)
+			break;
+	}
+	if (i == defcmd_set_count) {
+		kdb_printf("kdb_exec_defcmd: could not find commands for %s\n",
+			   argv[0]);
+		return KDB_NOTIMP;
+	}
+	for (i = 0; i < s->count; ++i) {
+		/* Recursive use of kdb_parse, do not use argv after
+		 * this point */
+		argv = NULL;
+		kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]);
+		ret = kdb_parse(s->command[i]);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+/* Command history */
+#define KDB_CMD_HISTORY_COUNT	32
+#define CMD_BUFLEN		200	/* kdb_printf: max printline
+					 * size == 256 */
+static unsigned int cmd_head, cmd_tail;
+static unsigned int cmdptr;
+static char cmd_hist[KDB_CMD_HISTORY_COUNT][CMD_BUFLEN];
+static char cmd_cur[CMD_BUFLEN];
+
+/*
+ * The "str" argument may point to something like  | grep xyz
+ */
+static void parse_grep(const char *str)
+{
+	int	len;
+	char	*cp = (char *)str, *cp2;
+
+	/* sanity check: we should have been called with the \ first */
+	if (*cp != '|')
+		return;
+	cp++;
+	while (isspace(*cp))
+		cp++;
+	if (strncmp(cp, "grep ", 5)) {
+		kdb_printf("invalid 'pipe', see grephelp\n");
+		return;
+	}
+	cp += 5;
+	while (isspace(*cp))
+		cp++;
+	cp2 = strchr(cp, '\n');
+	if (cp2)
+		*cp2 = '\0'; /* remove the trailing newline */
+	len = strlen(cp);
+	if (len == 0) {
+		kdb_printf("invalid 'pipe', see grephelp\n");
+		return;
+	}
+	/* now cp points to a nonzero length search string */
+	if (*cp == '"') {
+		/* allow it be "x y z" by removing the "'s - there must
+		   be two of them */
+		cp++;
+		cp2 = strchr(cp, '"');
+		if (!cp2) {
+			kdb_printf("invalid quoted string, see grephelp\n");
+			return;
+		}
+		*cp2 = '\0'; /* end the string where the 2nd " was */
+	}
+	kdb_grep_leading = 0;
+	if (*cp == '^') {
+		kdb_grep_leading = 1;
+		cp++;
+	}
+	len = strlen(cp);
+	kdb_grep_trailing = 0;
+	if (*(cp+len-1) == '$') {
+		kdb_grep_trailing = 1;
+		*(cp+len-1) = '\0';
+	}
+	len = strlen(cp);
+	if (!len)
+		return;
+	if (len >= GREP_LEN) {
+		kdb_printf("search string too long\n");
+		return;
+	}
+	strcpy(kdb_grep_string, cp);
+	kdb_grepping_flag++;
+	return;
+}
+
+/*
+ * kdb_parse - Parse the command line, search the command table for a
+ *	matching command and invoke the command function.  This
+ *	function may be called recursively, if it is, the second call
+ *	will overwrite argv and cbuf.  It is the caller's
+ *	responsibility to save their argv if they recursively call
+ *	kdb_parse().
+ * Parameters:
+ *      cmdstr	The input command line to be parsed.
+ *	regs	The registers at the time kdb was entered.
+ * Returns:
+ *	Zero for success, a kdb diagnostic if failure.
+ * Remarks:
+ *	Limited to 20 tokens.
+ *
+ *	Real rudimentary tokenization. Basically only whitespace
+ *	is considered a token delimeter (but special consideration
+ *	is taken of the '=' sign as used by the 'set' command).
+ *
+ *	The algorithm used to tokenize the input string relies on
+ *	there being at least one whitespace (or otherwise useless)
+ *	character between tokens as the character immediately following
+ *	the token is altered in-place to a null-byte to terminate the
+ *	token string.
+ */
+
+#define MAXARGC	20
+
+int kdb_parse(const char *cmdstr)
+{
+	static char *argv[MAXARGC];
+	static int argc;
+	static char cbuf[CMD_BUFLEN+2];
+	char *cp;
+	char *cpp, quoted;
+	kdbtab_t *tp;
+	int i, escaped, ignore_errors = 0, check_grep;
+
+	/*
+	 * First tokenize the command string.
+	 */
+	cp = (char *)cmdstr;
+	kdb_grepping_flag = check_grep = 0;
+
+	if (KDB_FLAG(CMD_INTERRUPT)) {
+		/* Previous command was interrupted, newline must not
+		 * repeat the command */
+		KDB_FLAG_CLEAR(CMD_INTERRUPT);
+		KDB_STATE_SET(PAGER);
+		argc = 0;	/* no repeat */
+	}
+
+	if (*cp != '\n' && *cp != '\0') {
+		argc = 0;
+		cpp = cbuf;
+		while (*cp) {
+			/* skip whitespace */
+			while (isspace(*cp))
+				cp++;
+			if ((*cp == '\0') || (*cp == '\n') ||
+			    (*cp == '#' && !defcmd_in_progress))
+				break;
+			/* special case: check for | grep pattern */
+			if (*cp == '|') {
+				check_grep++;
+				break;
+			}
+			if (cpp >= cbuf + CMD_BUFLEN) {
+				kdb_printf("kdb_parse: command buffer "
+					   "overflow, command ignored\n%s\n",
+					   cmdstr);
+				return KDB_NOTFOUND;
+			}
+			if (argc >= MAXARGC - 1) {
+				kdb_printf("kdb_parse: too many arguments, "
+					   "command ignored\n%s\n", cmdstr);
+				return KDB_NOTFOUND;
+			}
+			argv[argc++] = cpp;
+			escaped = 0;
+			quoted = '\0';
+			/* Copy to next unquoted and unescaped
+			 * whitespace or '=' */
+			while (*cp && *cp != '\n' &&
+			       (escaped || quoted || !isspace(*cp))) {
+				if (cpp >= cbuf + CMD_BUFLEN)
+					break;
+				if (escaped) {
+					escaped = 0;
+					*cpp++ = *cp++;
+					continue;
+				}
+				if (*cp == '\\') {
+					escaped = 1;
+					++cp;
+					continue;
+				}
+				if (*cp == quoted)
+					quoted = '\0';
+				else if (*cp == '\'' || *cp == '"')
+					quoted = *cp;
+				*cpp = *cp++;
+				if (*cpp == '=' && !quoted)
+					break;
+				++cpp;
+			}
+			*cpp++ = '\0';	/* Squash a ws or '=' character */
+		}
+	}
+	if (!argc)
+		return 0;
+	if (check_grep)
+		parse_grep(cp);
+	if (defcmd_in_progress) {
+		int result = kdb_defcmd2(cmdstr, argv[0]);
+		if (!defcmd_in_progress) {
+			argc = 0;	/* avoid repeat on endefcmd */
+			*(argv[0]) = '\0';
+		}
+		return result;
+	}
+	if (argv[0][0] == '-' && argv[0][1] &&
+	    (argv[0][1] < '0' || argv[0][1] > '9')) {
+		ignore_errors = 1;
+		++argv[0];
+	}
+
+	for_each_kdbcmd(tp, i) {
+		if (tp->cmd_name) {
+			/*
+			 * If this command is allowed to be abbreviated,
+			 * check to see if this is it.
+			 */
+
+			if (tp->cmd_minlen
+			 && (strlen(argv[0]) <= tp->cmd_minlen)) {
+				if (strncmp(argv[0],
+					    tp->cmd_name,
+					    tp->cmd_minlen) == 0) {
+					break;
+				}
+			}
+
+			if (strcmp(argv[0], tp->cmd_name) == 0)
+				break;
+		}
+	}
+
+	/*
+	 * If we don't find a command by this name, see if the first
+	 * few characters of this match any of the known commands.
+	 * e.g., md1c20 should match md.
+	 */
+	if (i == kdb_max_commands) {
+		for_each_kdbcmd(tp, i) {
+			if (tp->cmd_name) {
+				if (strncmp(argv[0],
+					    tp->cmd_name,
+					    strlen(tp->cmd_name)) == 0) {
+					break;
+				}
+			}
+		}
+	}
+
+	if (i < kdb_max_commands) {
+		int result;
+		KDB_STATE_SET(CMD);
+		result = (*tp->cmd_func)(argc-1, (const char **)argv);
+		if (result && ignore_errors && result > KDB_CMD_GO)
+			result = 0;
+		KDB_STATE_CLEAR(CMD);
+		switch (tp->cmd_repeat) {
+		case KDB_REPEAT_NONE:
+			argc = 0;
+			if (argv[0])
+				*(argv[0]) = '\0';
+			break;
+		case KDB_REPEAT_NO_ARGS:
+			argc = 1;
+			if (argv[1])
+				*(argv[1]) = '\0';
+			break;
+		case KDB_REPEAT_WITH_ARGS:
+			break;
+		}
+		return result;
+	}
+
+	/*
+	 * If the input with which we were presented does not
+	 * map to an existing command, attempt to parse it as an
+	 * address argument and display the result.   Useful for
+	 * obtaining the address of a variable, or the nearest symbol
+	 * to an address contained in a register.
+	 */
+	{
+		unsigned long value;
+		char *name = NULL;
+		long offset;
+		int nextarg = 0;
+
+		if (kdbgetaddrarg(0, (const char **)argv, &nextarg,
+				  &value, &offset, &name)) {
+			return KDB_NOTFOUND;
+		}
+
+		kdb_printf("%s = ", argv[0]);
+		kdb_symbol_print(value, NULL, KDB_SP_DEFAULT);
+		kdb_printf("\n");
+		return 0;
+	}
+}
+
+
+static int handle_ctrl_cmd(char *cmd)
+{
+#define CTRL_P	16
+#define CTRL_N	14
+
+	/* initial situation */
+	if (cmd_head == cmd_tail)
+		return 0;
+	switch (*cmd) {
+	case CTRL_P:
+		if (cmdptr != cmd_tail)
+			cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT;
+		strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
+		return 1;
+	case CTRL_N:
+		if (cmdptr != cmd_head)
+			cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT;
+		strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * kdb_reboot - This function implements the 'reboot' command.  Reboot
+ *	the system immediately, or loop for ever on failure.
+ */
+static int kdb_reboot(int argc, const char **argv)
+{
+	emergency_restart();
+	kdb_printf("Hmm, kdb_reboot did not reboot, spinning here\n");
+	while (1)
+		cpu_relax();
+	/* NOTREACHED */
+	return 0;
+}
+
+static void kdb_dumpregs(struct pt_regs *regs)
+{
+	int old_lvl = console_loglevel;
+	console_loglevel = 15;
+	kdb_trap_printk++;
+	show_regs(regs);
+	kdb_trap_printk--;
+	kdb_printf("\n");
+	console_loglevel = old_lvl;
+}
+
+void kdb_set_current_task(struct task_struct *p)
+{
+	kdb_current_task = p;
+
+	if (kdb_task_has_cpu(p)) {
+		kdb_current_regs = KDB_TSKREGS(kdb_process_cpu(p));
+		return;
+	}
+	kdb_current_regs = NULL;
+}
+
+/*
+ * kdb_local - The main code for kdb.  This routine is invoked on a
+ *	specific processor, it is not global.  The main kdb() routine
+ *	ensures that only one processor at a time is in this routine.
+ *	This code is called with the real reason code on the first
+ *	entry to a kdb session, thereafter it is called with reason
+ *	SWITCH, even if the user goes back to the original cpu.
+ * Inputs:
+ *	reason		The reason KDB was invoked
+ *	error		The hardware-defined error code
+ *	regs		The exception frame at time of fault/breakpoint.
+ *	db_result	Result code from the break or debug point.
+ * Returns:
+ *	0	KDB was invoked for an event which it wasn't responsible
+ *	1	KDB handled the event for which it was invoked.
+ *	KDB_CMD_GO	User typed 'go'.
+ *	KDB_CMD_CPU	User switched to another cpu.
+ *	KDB_CMD_SS	Single step.
+ *	KDB_CMD_SSB	Single step until branch.
+ */
+static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs,
+		     kdb_dbtrap_t db_result)
+{
+	char *cmdbuf;
+	int diag;
+	struct task_struct *kdb_current =
+		kdb_curr_task(raw_smp_processor_id());
+
+	KDB_DEBUG_STATE("kdb_local 1", reason);
+	kdb_go_count = 0;
+	if (reason == KDB_REASON_DEBUG) {
+		/* special case below */
+	} else {
+		kdb_printf("\nEntering kdb (current=0x%p, pid %d) ",
+			   kdb_current, kdb_current->pid);
+#if defined(CONFIG_SMP)
+		kdb_printf("on processor %d ", raw_smp_processor_id());
+#endif
+	}
+
+	switch (reason) {
+	case KDB_REASON_DEBUG:
+	{
+		/*
+		 * If re-entering kdb after a single step
+		 * command, don't print the message.
+		 */
+		switch (db_result) {
+		case KDB_DB_BPT:
+			kdb_printf("\nEntering kdb (0x%p, pid %d) ",
+				   kdb_current, kdb_current->pid);
+#if defined(CONFIG_SMP)
+			kdb_printf("on processor %d ", raw_smp_processor_id());
+#endif
+			kdb_printf("due to Debug @ " kdb_machreg_fmt "\n",
+				   instruction_pointer(regs));
+			break;
+		case KDB_DB_SSB:
+			/*
+			 * In the midst of ssb command. Just return.
+			 */
+			KDB_DEBUG_STATE("kdb_local 3", reason);
+			return KDB_CMD_SSB;	/* Continue with SSB command */
+
+			break;
+		case KDB_DB_SS:
+			break;
+		case KDB_DB_SSBPT:
+			KDB_DEBUG_STATE("kdb_local 4", reason);
+			return 1;	/* kdba_db_trap did the work */
+		default:
+			kdb_printf("kdb: Bad result from kdba_db_trap: %d\n",
+				   db_result);
+			break;
+		}
+
+	}
+		break;
+	case KDB_REASON_ENTER:
+		if (KDB_STATE(KEYBOARD))
+			kdb_printf("due to Keyboard Entry\n");
+		else
+			kdb_printf("due to KDB_ENTER()\n");
+		break;
+	case KDB_REASON_KEYBOARD:
+		KDB_STATE_SET(KEYBOARD);
+		kdb_printf("due to Keyboard Entry\n");
+		break;
+	case KDB_REASON_ENTER_SLAVE:
+		/* drop through, slaves only get released via cpu switch */
+	case KDB_REASON_SWITCH:
+		kdb_printf("due to cpu switch\n");
+		break;
+	case KDB_REASON_OOPS:
+		kdb_printf("Oops: %s\n", kdb_diemsg);
+		kdb_printf("due to oops @ " kdb_machreg_fmt "\n",
+			   instruction_pointer(regs));
+		kdb_dumpregs(regs);
+		break;
+	case KDB_REASON_NMI:
+		kdb_printf("due to NonMaskable Interrupt @ "
+			   kdb_machreg_fmt "\n",
+			   instruction_pointer(regs));
+		kdb_dumpregs(regs);
+		break;
+	case KDB_REASON_SSTEP:
+	case KDB_REASON_BREAK:
+		kdb_printf("due to %s @ " kdb_machreg_fmt "\n",
+			   reason == KDB_REASON_BREAK ?
+			   "Breakpoint" : "SS trap", instruction_pointer(regs));
+		/*
+		 * Determine if this breakpoint is one that we
+		 * are interested in.
+		 */
+		if (db_result != KDB_DB_BPT) {
+			kdb_printf("kdb: error return from kdba_bp_trap: %d\n",
+				   db_result);
+			KDB_DEBUG_STATE("kdb_local 6", reason);
+			return 0;	/* Not for us, dismiss it */
+		}
+		break;
+	case KDB_REASON_RECURSE:
+		kdb_printf("due to Recursion @ " kdb_machreg_fmt "\n",
+			   instruction_pointer(regs));
+		break;
+	default:
+		kdb_printf("kdb: unexpected reason code: %d\n", reason);
+		KDB_DEBUG_STATE("kdb_local 8", reason);
+		return 0;	/* Not for us, dismiss it */
+	}
+
+	while (1) {
+		/*
+		 * Initialize pager context.
+		 */
+		kdb_nextline = 1;
+		KDB_STATE_CLEAR(SUPPRESS);
+
+		cmdbuf = cmd_cur;
+		*cmdbuf = '\0';
+		*(cmd_hist[cmd_head]) = '\0';
+
+		if (KDB_FLAG(ONLY_DO_DUMP)) {
+			/* kdb is off but a catastrophic error requires a dump.
+			 * Take the dump and reboot.
+			 * Turn on logging so the kdb output appears in the log
+			 * buffer in the dump.
+			 */
+			const char *setargs[] = { "set", "LOGGING", "1" };
+			kdb_set(2, setargs);
+			kdb_reboot(0, NULL);
+			/*NOTREACHED*/
+		}
+
+do_full_getstr:
+#if defined(CONFIG_SMP)
+		snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"),
+			 raw_smp_processor_id());
+#else
+		snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"));
+#endif
+		if (defcmd_in_progress)
+			strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN);
+
+		/*
+		 * Fetch command from keyboard
+		 */
+		cmdbuf = kdb_getstr(cmdbuf, CMD_BUFLEN, kdb_prompt_str);
+		if (*cmdbuf != '\n') {
+			if (*cmdbuf < 32) {
+				if (cmdptr == cmd_head) {
+					strncpy(cmd_hist[cmd_head], cmd_cur,
+						CMD_BUFLEN);
+					*(cmd_hist[cmd_head] +
+					  strlen(cmd_hist[cmd_head])-1) = '\0';
+				}
+				if (!handle_ctrl_cmd(cmdbuf))
+					*(cmd_cur+strlen(cmd_cur)-1) = '\0';
+				cmdbuf = cmd_cur;
+				goto do_full_getstr;
+			} else {
+				strncpy(cmd_hist[cmd_head], cmd_cur,
+					CMD_BUFLEN);
+			}
+
+			cmd_head = (cmd_head+1) % KDB_CMD_HISTORY_COUNT;
+			if (cmd_head == cmd_tail)
+				cmd_tail = (cmd_tail+1) % KDB_CMD_HISTORY_COUNT;
+		}
+
+		cmdptr = cmd_head;
+		diag = kdb_parse(cmdbuf);
+		if (diag == KDB_NOTFOUND) {
+			kdb_printf("Unknown kdb command: '%s'\n", cmdbuf);
+			diag = 0;
+		}
+		if (diag == KDB_CMD_GO
+		 || diag == KDB_CMD_CPU
+		 || diag == KDB_CMD_SS
+		 || diag == KDB_CMD_SSB
+		 || diag == KDB_CMD_KGDB)
+			break;
+
+		if (diag)
+			kdb_cmderror(diag);
+	}
+	KDB_DEBUG_STATE("kdb_local 9", diag);
+	return diag;
+}
+
+
+/*
+ * kdb_print_state - Print the state data for the current processor
+ *	for debugging.
+ * Inputs:
+ *	text		Identifies the debug point
+ *	value		Any integer value to be printed, e.g. reason code.
+ */
+void kdb_print_state(const char *text, int value)
+{
+	kdb_printf("state: %s cpu %d value %d initial %d state %x\n",
+		   text, raw_smp_processor_id(), value, kdb_initial_cpu,
+		   kdb_state);
+}
+
+/*
+ * kdb_main_loop - After initial setup and assignment of the
+ *	controlling cpu, all cpus are in this loop.  One cpu is in
+ *	control and will issue the kdb prompt, the others will spin
+ *	until 'go' or cpu switch.
+ *
+ *	To get a consistent view of the kernel stacks for all
+ *	processes, this routine is invoked from the main kdb code via
+ *	an architecture specific routine.  kdba_main_loop is
+ *	responsible for making the kernel stacks consistent for all
+ *	processes, there should be no difference between a blocked
+ *	process and a running process as far as kdb is concerned.
+ * Inputs:
+ *	reason		The reason KDB was invoked
+ *	error		The hardware-defined error code
+ *	reason2		kdb's current reason code.
+ *			Initially error but can change
+ *			acording to kdb state.
+ *	db_result	Result code from break or debug point.
+ *	regs		The exception frame at time of fault/breakpoint.
+ *			should always be valid.
+ * Returns:
+ *	0	KDB was invoked for an event which it wasn't responsible
+ *	1	KDB handled the event for which it was invoked.
+ */
+int kdb_main_loop(kdb_reason_t reason, kdb_reason_t reason2, int error,
+	      kdb_dbtrap_t db_result, struct pt_regs *regs)
+{
+	int result = 1;
+	/* Stay in kdb() until 'go', 'ss[b]' or an error */
+	while (1) {
+		/*
+		 * All processors except the one that is in control
+		 * will spin here.
+		 */
+		KDB_DEBUG_STATE("kdb_main_loop 1", reason);
+		while (KDB_STATE(HOLD_CPU)) {
+			/* state KDB is turned off by kdb_cpu to see if the
+			 * other cpus are still live, each cpu in this loop
+			 * turns it back on.
+			 */
+			if (!KDB_STATE(KDB))
+				KDB_STATE_SET(KDB);
+		}
+
+		KDB_STATE_CLEAR(SUPPRESS);
+		KDB_DEBUG_STATE("kdb_main_loop 2", reason);
+		if (KDB_STATE(LEAVING))
+			break;	/* Another cpu said 'go' */
+		/* Still using kdb, this processor is in control */
+		result = kdb_local(reason2, error, regs, db_result);
+		KDB_DEBUG_STATE("kdb_main_loop 3", result);
+
+		if (result == KDB_CMD_CPU)
+			break;
+
+		if (result == KDB_CMD_SS) {
+			KDB_STATE_SET(DOING_SS);
+			break;
+		}
+
+		if (result == KDB_CMD_SSB) {
+			KDB_STATE_SET(DOING_SS);
+			KDB_STATE_SET(DOING_SSB);
+			break;
+		}
+
+		if (result == KDB_CMD_KGDB) {
+			if (!(KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2)))
+				kdb_printf("Entering please attach debugger "
+					   "or use $D#44+ or $3#33\n");
+			break;
+		}
+		if (result && result != 1 && result != KDB_CMD_GO)
+			kdb_printf("\nUnexpected kdb_local return code %d\n",
+				   result);
+		KDB_DEBUG_STATE("kdb_main_loop 4", reason);
+		break;
+	}
+	if (KDB_STATE(DOING_SS))
+		KDB_STATE_CLEAR(SSBPT);
+
+	return result;
+}
+
+/*
+ * kdb_mdr - This function implements the guts of the 'mdr', memory
+ * read command.
+ *	mdr  <addr arg>,<byte count>
+ * Inputs:
+ *	addr	Start address
+ *	count	Number of bytes
+ * Returns:
+ *	Always 0.  Any errors are detected and printed by kdb_getarea.
+ */
+static int kdb_mdr(unsigned long addr, unsigned int count)
+{
+	unsigned char c;
+	while (count--) {
+		if (kdb_getarea(c, addr))
+			return 0;
+		kdb_printf("%02x", c);
+		addr++;
+	}
+	kdb_printf("\n");
+	return 0;
+}
+
+/*
+ * kdb_md - This function implements the 'md', 'md1', 'md2', 'md4',
+ *	'md8' 'mdr' and 'mds' commands.
+ *
+ *	md|mds  [<addr arg> [<line count> [<radix>]]]
+ *	mdWcN	[<addr arg> [<line count> [<radix>]]]
+ *		where W = is the width (1, 2, 4 or 8) and N is the count.
+ *		for eg., md1c20 reads 20 bytes, 1 at a time.
+ *	mdr  <addr arg>,<byte count>
+ */
+static void kdb_md_line(const char *fmtstr, unsigned long addr,
+			int symbolic, int nosect, int bytesperword,
+			int num, int repeat, int phys)
+{
+	/* print just one line of data */
+	kdb_symtab_t symtab;
+	char cbuf[32];
+	char *c = cbuf;
+	int i;
+	unsigned long word;
+
+	memset(cbuf, '\0', sizeof(cbuf));
+	if (phys)
+		kdb_printf("phys " kdb_machreg_fmt0 " ", addr);
+	else
+		kdb_printf(kdb_machreg_fmt0 " ", addr);
+
+	for (i = 0; i < num && repeat--; i++) {
+		if (phys) {
+			if (kdb_getphysword(&word, addr, bytesperword))
+				break;
+		} else if (kdb_getword(&word, addr, bytesperword))
+			break;
+		kdb_printf(fmtstr, word);
+		if (symbolic)
+			kdbnearsym(word, &symtab);
+		else
+			memset(&symtab, 0, sizeof(symtab));
+		if (symtab.sym_name) {
+			kdb_symbol_print(word, &symtab, 0);
+			if (!nosect) {
+				kdb_printf("\n");
+				kdb_printf("                       %s %s "
+					   kdb_machreg_fmt " "
+					   kdb_machreg_fmt " "
+					   kdb_machreg_fmt, symtab.mod_name,
+					   symtab.sec_name, symtab.sec_start,
+					   symtab.sym_start, symtab.sym_end);
+			}
+			addr += bytesperword;
+		} else {
+			union {
+				u64 word;
+				unsigned char c[8];
+			} wc;
+			unsigned char *cp;
+#ifdef	__BIG_ENDIAN
+			cp = wc.c + 8 - bytesperword;
+#else
+			cp = wc.c;
+#endif
+			wc.word = word;
+#define printable_char(c) \
+	({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; })
+			switch (bytesperword) {
+			case 8:
+				*c++ = printable_char(*cp++);
+				*c++ = printable_char(*cp++);
+				*c++ = printable_char(*cp++);
+				*c++ = printable_char(*cp++);
+				addr += 4;
+			case 4:
+				*c++ = printable_char(*cp++);
+				*c++ = printable_char(*cp++);
+				addr += 2;
+			case 2:
+				*c++ = printable_char(*cp++);
+				addr++;
+			case 1:
+				*c++ = printable_char(*cp++);
+				addr++;
+				break;
+			}
+#undef printable_char
+		}
+	}
+	kdb_printf("%*s %s\n", (int)((num-i)*(2*bytesperword + 1)+1),
+		   " ", cbuf);
+}
+
+static int kdb_md(int argc, const char **argv)
+{
+	static unsigned long last_addr;
+	static int last_radix, last_bytesperword, last_repeat;
+	int radix = 16, mdcount = 8, bytesperword = KDB_WORD_SIZE, repeat;
+	int nosect = 0;
+	char fmtchar, fmtstr[64];
+	unsigned long addr;
+	unsigned long word;
+	long offset = 0;
+	int symbolic = 0;
+	int valid = 0;
+	int phys = 0;
+
+	kdbgetintenv("MDCOUNT", &mdcount);
+	kdbgetintenv("RADIX", &radix);
+	kdbgetintenv("BYTESPERWORD", &bytesperword);
+
+	/* Assume 'md <addr>' and start with environment values */
+	repeat = mdcount * 16 / bytesperword;
+
+	if (strcmp(argv[0], "mdr") == 0) {
+		if (argc != 2)
+			return KDB_ARGCOUNT;
+		valid = 1;
+	} else if (isdigit(argv[0][2])) {
+		bytesperword = (int)(argv[0][2] - '0');
+		if (bytesperword == 0) {
+			bytesperword = last_bytesperword;
+			if (bytesperword == 0)
+				bytesperword = 4;
+		}
+		last_bytesperword = bytesperword;
+		repeat = mdcount * 16 / bytesperword;
+		if (!argv[0][3])
+			valid = 1;
+		else if (argv[0][3] == 'c' && argv[0][4]) {
+			char *p;
+			repeat = simple_strtoul(argv[0] + 4, &p, 10);
+			mdcount = ((repeat * bytesperword) + 15) / 16;
+			valid = !*p;
+		}
+		last_repeat = repeat;
+	} else if (strcmp(argv[0], "md") == 0)
+		valid = 1;
+	else if (strcmp(argv[0], "mds") == 0)
+		valid = 1;
+	else if (strcmp(argv[0], "mdp") == 0) {
+		phys = valid = 1;
+	}
+	if (!valid)
+		return KDB_NOTFOUND;
+
+	if (argc == 0) {
+		if (last_addr == 0)
+			return KDB_ARGCOUNT;
+		addr = last_addr;
+		radix = last_radix;
+		bytesperword = last_bytesperword;
+		repeat = last_repeat;
+		mdcount = ((repeat * bytesperword) + 15) / 16;
+	}
+
+	if (argc) {
+		unsigned long val;
+		int diag, nextarg = 1;
+		diag = kdbgetaddrarg(argc, argv, &nextarg, &addr,
+				     &offset, NULL);
+		if (diag)
+			return diag;
+		if (argc > nextarg+2)
+			return KDB_ARGCOUNT;
+
+		if (argc >= nextarg) {
+			diag = kdbgetularg(argv[nextarg], &val);
+			if (!diag) {
+				mdcount = (int) val;
+				repeat = mdcount * 16 / bytesperword;
+			}
+		}
+		if (argc >= nextarg+1) {
+			diag = kdbgetularg(argv[nextarg+1], &val);
+			if (!diag)
+				radix = (int) val;
+		}
+	}
+
+	if (strcmp(argv[0], "mdr") == 0)
+		return kdb_mdr(addr, mdcount);
+
+	switch (radix) {
+	case 10:
+		fmtchar = 'd';
+		break;
+	case 16:
+		fmtchar = 'x';
+		break;
+	case 8:
+		fmtchar = 'o';
+		break;
+	default:
+		return KDB_BADRADIX;
+	}
+
+	last_radix = radix;
+
+	if (bytesperword > KDB_WORD_SIZE)
+		return KDB_BADWIDTH;
+
+	switch (bytesperword) {
+	case 8:
+		sprintf(fmtstr, "%%16.16l%c ", fmtchar);
+		break;
+	case 4:
+		sprintf(fmtstr, "%%8.8l%c ", fmtchar);
+		break;
+	case 2:
+		sprintf(fmtstr, "%%4.4l%c ", fmtchar);
+		break;
+	case 1:
+		sprintf(fmtstr, "%%2.2l%c ", fmtchar);
+		break;
+	default:
+		return KDB_BADWIDTH;
+	}
+
+	last_repeat = repeat;
+	last_bytesperword = bytesperword;
+
+	if (strcmp(argv[0], "mds") == 0) {
+		symbolic = 1;
+		/* Do not save these changes as last_*, they are temporary mds
+		 * overrides.
+		 */
+		bytesperword = KDB_WORD_SIZE;
+		repeat = mdcount;
+		kdbgetintenv("NOSECT", &nosect);
+	}
+
+	/* Round address down modulo BYTESPERWORD */
+
+	addr &= ~(bytesperword-1);
+
+	while (repeat > 0) {
+		unsigned long a;
+		int n, z, num = (symbolic ? 1 : (16 / bytesperword));
+
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+		for (a = addr, z = 0; z < repeat; a += bytesperword, ++z) {
+			if (phys) {
+				if (kdb_getphysword(&word, a, bytesperword)
+						|| word)
+					break;
+			} else if (kdb_getword(&word, a, bytesperword) || word)
+				break;
+		}
+		n = min(num, repeat);
+		kdb_md_line(fmtstr, addr, symbolic, nosect, bytesperword,
+			    num, repeat, phys);
+		addr += bytesperword * n;
+		repeat -= n;
+		z = (z + num - 1) / num;
+		if (z > 2) {
+			int s = num * (z-2);
+			kdb_printf(kdb_machreg_fmt0 "-" kdb_machreg_fmt0
+				   " zero suppressed\n",
+				addr, addr + bytesperword * s - 1);
+			addr += bytesperword * s;
+			repeat -= s;
+		}
+	}
+	last_addr = addr;
+
+	return 0;
+}
+
+/*
+ * kdb_mm - This function implements the 'mm' command.
+ *	mm address-expression new-value
+ * Remarks:
+ *	mm works on machine words, mmW works on bytes.
+ */
+static int kdb_mm(int argc, const char **argv)
+{
+	int diag;
+	unsigned long addr;
+	long offset = 0;
+	unsigned long contents;
+	int nextarg;
+	int width;
+
+	if (argv[0][2] && !isdigit(argv[0][2]))
+		return KDB_NOTFOUND;
+
+	if (argc < 2)
+		return KDB_ARGCOUNT;
+
+	nextarg = 1;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL);
+	if (diag)
+		return diag;
+
+	if (nextarg > argc)
+		return KDB_ARGCOUNT;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &contents, NULL, NULL);
+	if (diag)
+		return diag;
+
+	if (nextarg != argc + 1)
+		return KDB_ARGCOUNT;
+
+	width = argv[0][2] ? (argv[0][2] - '0') : (KDB_WORD_SIZE);
+	diag = kdb_putword(addr, contents, width);
+	if (diag)
+		return diag;
+
+	kdb_printf(kdb_machreg_fmt " = " kdb_machreg_fmt "\n", addr, contents);
+
+	return 0;
+}
+
+/*
+ * kdb_go - This function implements the 'go' command.
+ *	go [address-expression]
+ */
+static int kdb_go(int argc, const char **argv)
+{
+	unsigned long addr;
+	int diag;
+	int nextarg;
+	long offset;
+
+	if (argc == 1) {
+		if (raw_smp_processor_id() != kdb_initial_cpu) {
+			kdb_printf("go <address> must be issued from the "
+				   "initial cpu, do cpu %d first\n",
+				   kdb_initial_cpu);
+			return KDB_ARGCOUNT;
+		}
+		nextarg = 1;
+		diag = kdbgetaddrarg(argc, argv, &nextarg,
+				     &addr, &offset, NULL);
+		if (diag)
+			return diag;
+	} else if (argc) {
+		return KDB_ARGCOUNT;
+	}
+
+	diag = KDB_CMD_GO;
+	if (KDB_FLAG(CATASTROPHIC)) {
+		kdb_printf("Catastrophic error detected\n");
+		kdb_printf("kdb_continue_catastrophic=%d, ",
+			kdb_continue_catastrophic);
+		if (kdb_continue_catastrophic == 0 && kdb_go_count++ == 0) {
+			kdb_printf("type go a second time if you really want "
+				   "to continue\n");
+			return 0;
+		}
+		if (kdb_continue_catastrophic == 2) {
+			kdb_printf("forcing reboot\n");
+			kdb_reboot(0, NULL);
+		}
+		kdb_printf("attempting to continue\n");
+	}
+	return diag;
+}
+
+/*
+ * kdb_rd - This function implements the 'rd' command.
+ */
+static int kdb_rd(int argc, const char **argv)
+{
+	int diag = kdb_check_regs();
+	if (diag)
+		return diag;
+
+	kdb_dumpregs(kdb_current_regs);
+	return 0;
+}
+
+/*
+ * kdb_rm - This function implements the 'rm' (register modify)  command.
+ *	rm register-name new-contents
+ * Remarks:
+ *	Currently doesn't allow modification of control or
+ *	debug registers.
+ */
+static int kdb_rm(int argc, const char **argv)
+{
+	int diag;
+	int ind = 0;
+	unsigned long contents;
+
+	if (argc != 2)
+		return KDB_ARGCOUNT;
+	/*
+	 * Allow presence or absence of leading '%' symbol.
+	 */
+	if (argv[1][0] == '%')
+		ind = 1;
+
+	diag = kdbgetularg(argv[2], &contents);
+	if (diag)
+		return diag;
+
+	diag = kdb_check_regs();
+	if (diag)
+		return diag;
+	kdb_printf("ERROR: Register set currently not implemented\n");
+	return 0;
+}
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+/*
+ * kdb_sr - This function implements the 'sr' (SYSRQ key) command
+ *	which interfaces to the soi-disant MAGIC SYSRQ functionality.
+ *		sr <magic-sysrq-code>
+ */
+static int kdb_sr(int argc, const char **argv)
+{
+	if (argc != 1)
+		return KDB_ARGCOUNT;
+	sysrq_toggle_support(1);
+	kdb_trap_printk++;
+	handle_sysrq(*argv[1], NULL);
+	kdb_trap_printk--;
+
+	return 0;
+}
+#endif	/* CONFIG_MAGIC_SYSRQ */
+
+/*
+ * kdb_ef - This function implements the 'regs' (display exception
+ *	frame) command.  This command takes an address and expects to
+ *	find an exception frame at that address, formats and prints
+ *	it.
+ *		regs address-expression
+ * Remarks:
+ *	Not done yet.
+ */
+static int kdb_ef(int argc, const char **argv)
+{
+	int diag;
+	unsigned long addr;
+	long offset;
+	int nextarg;
+
+	if (argc != 1)
+		return KDB_ARGCOUNT;
+
+	nextarg = 1;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL);
+	if (diag)
+		return diag;
+	show_regs((struct pt_regs *)addr);
+	return 0;
+}
+
+#if defined(CONFIG_MODULES)
+/* modules using other modules */
+struct module_use {
+	struct list_head list;
+	struct module *module_which_uses;
+};
+
+/*
+ * kdb_lsmod - This function implements the 'lsmod' command.  Lists
+ *	currently loaded kernel modules.
+ *	Mostly taken from userland lsmod.
+ */
+static int kdb_lsmod(int argc, const char **argv)
+{
+	struct module *mod;
+
+	if (argc != 0)
+		return KDB_ARGCOUNT;
+
+	kdb_printf("Module                  Size  modstruct     Used by\n");
+	list_for_each_entry(mod, kdb_modules, list) {
+
+		kdb_printf("%-20s%8u  0x%p ", mod->name,
+			   mod->core_size, (void *)mod);
+#ifdef CONFIG_MODULE_UNLOAD
+		kdb_printf("%4d ", module_refcount(mod));
+#endif
+		if (mod->state == MODULE_STATE_GOING)
+			kdb_printf(" (Unloading)");
+		else if (mod->state == MODULE_STATE_COMING)
+			kdb_printf(" (Loading)");
+		else
+			kdb_printf(" (Live)");
+
+#ifdef CONFIG_MODULE_UNLOAD
+		{
+			struct module_use *use;
+			kdb_printf(" [ ");
+			list_for_each_entry(use, &mod->modules_which_use_me,
+					    list)
+				kdb_printf("%s ", use->module_which_uses->name);
+			kdb_printf("]\n");
+		}
+#endif
+	}
+
+	return 0;
+}
+
+#endif	/* CONFIG_MODULES */
+
+/*
+ * kdb_env - This function implements the 'env' command.  Display the
+ *	current environment variables.
+ */
+
+static int kdb_env(int argc, const char **argv)
+{
+	int i;
+
+	for (i = 0; i < __nenv; i++) {
+		if (__env[i])
+			kdb_printf("%s\n", __env[i]);
+	}
+
+	if (KDB_DEBUG(MASK))
+		kdb_printf("KDBFLAGS=0x%x\n", kdb_flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_PRINTK
+/*
+ * kdb_dmesg - This function implements the 'dmesg' command to display
+ *	the contents of the syslog buffer.
+ *		dmesg [lines] [adjust]
+ */
+static int kdb_dmesg(int argc, const char **argv)
+{
+	char *syslog_data[4], *start, *end, c = '\0', *p;
+	int diag, logging, logsize, lines = 0, adjust = 0, n;
+
+	if (argc > 2)
+		return KDB_ARGCOUNT;
+	if (argc) {
+		char *cp;
+		lines = simple_strtol(argv[1], &cp, 0);
+		if (*cp)
+			lines = 0;
+		if (argc > 1) {
+			adjust = simple_strtoul(argv[2], &cp, 0);
+			if (*cp || adjust < 0)
+				adjust = 0;
+		}
+	}
+
+	/* disable LOGGING if set */
+	diag = kdbgetintenv("LOGGING", &logging);
+	if (!diag && logging) {
+		const char *setargs[] = { "set", "LOGGING", "0" };
+		kdb_set(2, setargs);
+	}
+
+	/* syslog_data[0,1] physical start, end+1.  syslog_data[2,3]
+	 * logical start, end+1. */
+	kdb_syslog_data(syslog_data);
+	if (syslog_data[2] == syslog_data[3])
+		return 0;
+	logsize = syslog_data[1] - syslog_data[0];
+	start = syslog_data[2];
+	end = syslog_data[3];
+#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0])
+	for (n = 0, p = start; p < end; ++p) {
+		c = *KDB_WRAP(p);
+		if (c == '\n')
+			++n;
+	}
+	if (c != '\n')
+		++n;
+	if (lines < 0) {
+		if (adjust >= n)
+			kdb_printf("buffer only contains %d lines, nothing "
+				   "printed\n", n);
+		else if (adjust - lines >= n)
+			kdb_printf("buffer only contains %d lines, last %d "
+				   "lines printed\n", n, n - adjust);
+		if (adjust) {
+			for (; start < end && adjust; ++start) {
+				if (*KDB_WRAP(start) == '\n')
+					--adjust;
+			}
+			if (start < end)
+				++start;
+		}
+		for (p = start; p < end && lines; ++p) {
+			if (*KDB_WRAP(p) == '\n')
+				++lines;
+		}
+		end = p;
+	} else if (lines > 0) {
+		int skip = n - (adjust + lines);
+		if (adjust >= n) {
+			kdb_printf("buffer only contains %d lines, "
+				   "nothing printed\n", n);
+			skip = n;
+		} else if (skip < 0) {
+			lines += skip;
+			skip = 0;
+			kdb_printf("buffer only contains %d lines, first "
+				   "%d lines printed\n", n, lines);
+		}
+		for (; start < end && skip; ++start) {
+			if (*KDB_WRAP(start) == '\n')
+				--skip;
+		}
+		for (p = start; p < end && lines; ++p) {
+			if (*KDB_WRAP(p) == '\n')
+				--lines;
+		}
+		end = p;
+	}
+	/* Do a line at a time (max 200 chars) to reduce protocol overhead */
+	c = '\n';
+	while (start != end) {
+		char buf[201];
+		p = buf;
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+		while (start < end && (c = *KDB_WRAP(start)) &&
+		       (p - buf) < sizeof(buf)-1) {
+			++start;
+			*p++ = c;
+			if (c == '\n')
+				break;
+		}
+		*p = '\0';
+		kdb_printf("%s", buf);
+	}
+	if (c != '\n')
+		kdb_printf("\n");
+
+	return 0;
+}
+#endif /* CONFIG_PRINTK */
+/*
+ * kdb_cpu - This function implements the 'cpu' command.
+ *	cpu	[<cpunum>]
+ * Returns:
+ *	KDB_CMD_CPU for success, a kdb diagnostic if error
+ */
+static void kdb_cpu_status(void)
+{
+	int i, start_cpu, first_print = 1;
+	char state, prev_state = '?';
+
+	kdb_printf("Currently on cpu %d\n", raw_smp_processor_id());
+	kdb_printf("Available cpus: ");
+	for (start_cpu = -1, i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i)) {
+			state = 'F';	/* cpu is offline */
+		} else {
+			state = ' ';	/* cpu is responding to kdb */
+			if (kdb_task_state_char(KDB_TSK(i)) == 'I')
+				state = 'I';	/* idle task */
+		}
+		if (state != prev_state) {
+			if (prev_state != '?') {
+				if (!first_print)
+					kdb_printf(", ");
+				first_print = 0;
+				kdb_printf("%d", start_cpu);
+				if (start_cpu < i-1)
+					kdb_printf("-%d", i-1);
+				if (prev_state != ' ')
+					kdb_printf("(%c)", prev_state);
+			}
+			prev_state = state;
+			start_cpu = i;
+		}
+	}
+	/* print the trailing cpus, ignoring them if they are all offline */
+	if (prev_state != 'F') {
+		if (!first_print)
+			kdb_printf(", ");
+		kdb_printf("%d", start_cpu);
+		if (start_cpu < i-1)
+			kdb_printf("-%d", i-1);
+		if (prev_state != ' ')
+			kdb_printf("(%c)", prev_state);
+	}
+	kdb_printf("\n");
+}
+
+static int kdb_cpu(int argc, const char **argv)
+{
+	unsigned long cpunum;
+	int diag;
+
+	if (argc == 0) {
+		kdb_cpu_status();
+		return 0;
+	}
+
+	if (argc != 1)
+		return KDB_ARGCOUNT;
+
+	diag = kdbgetularg(argv[1], &cpunum);
+	if (diag)
+		return diag;
+
+	/*
+	 * Validate cpunum
+	 */
+	if ((cpunum > NR_CPUS) || !cpu_online(cpunum))
+		return KDB_BADCPUNUM;
+
+	dbg_switch_cpu = cpunum;
+
+	/*
+	 * Switch to other cpu
+	 */
+	return KDB_CMD_CPU;
+}
+
+/* The user may not realize that ps/bta with no parameters does not print idle
+ * or sleeping system daemon processes, so tell them how many were suppressed.
+ */
+void kdb_ps_suppressed(void)
+{
+	int idle = 0, daemon = 0;
+	unsigned long mask_I = kdb_task_state_string("I"),
+		      mask_M = kdb_task_state_string("M");
+	unsigned long cpu;
+	const struct task_struct *p, *g;
+	for_each_online_cpu(cpu) {
+		p = kdb_curr_task(cpu);
+		if (kdb_task_state(p, mask_I))
+			++idle;
+	}
+	kdb_do_each_thread(g, p) {
+		if (kdb_task_state(p, mask_M))
+			++daemon;
+	} kdb_while_each_thread(g, p);
+	if (idle || daemon) {
+		if (idle)
+			kdb_printf("%d idle process%s (state I)%s\n",
+				   idle, idle == 1 ? "" : "es",
+				   daemon ? " and " : "");
+		if (daemon)
+			kdb_printf("%d sleeping system daemon (state M) "
+				   "process%s", daemon,
+				   daemon == 1 ? "" : "es");
+		kdb_printf(" suppressed,\nuse 'ps A' to see all.\n");
+	}
+}
+
+/*
+ * kdb_ps - This function implements the 'ps' command which shows a
+ *	list of the active processes.
+ *		ps [DRSTCZEUIMA]   All processes, optionally filtered by state
+ */
+void kdb_ps1(const struct task_struct *p)
+{
+	int cpu;
+	unsigned long tmp;
+
+	if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long)))
+		return;
+
+	cpu = kdb_process_cpu(p);
+	kdb_printf("0x%p %8d %8d  %d %4d   %c  0x%p %c%s\n",
+		   (void *)p, p->pid, p->parent->pid,
+		   kdb_task_has_cpu(p), kdb_process_cpu(p),
+		   kdb_task_state_char(p),
+		   (void *)(&p->thread),
+		   p == kdb_curr_task(raw_smp_processor_id()) ? '*' : ' ',
+		   p->comm);
+	if (kdb_task_has_cpu(p)) {
+		if (!KDB_TSK(cpu)) {
+			kdb_printf("  Error: no saved data for this cpu\n");
+		} else {
+			if (KDB_TSK(cpu) != p)
+				kdb_printf("  Error: does not match running "
+				   "process table (0x%p)\n", KDB_TSK(cpu));
+		}
+	}
+}
+
+static int kdb_ps(int argc, const char **argv)
+{
+	struct task_struct *g, *p;
+	unsigned long mask, cpu;
+
+	if (argc == 0)
+		kdb_ps_suppressed();
+	kdb_printf("%-*s      Pid   Parent [*] cpu State %-*s Command\n",
+		(int)(2*sizeof(void *))+2, "Task Addr",
+		(int)(2*sizeof(void *))+2, "Thread");
+	mask = kdb_task_state_string(argc ? argv[1] : NULL);
+	/* Run the active tasks first */
+	for_each_online_cpu(cpu) {
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+		p = kdb_curr_task(cpu);
+		if (kdb_task_state(p, mask))
+			kdb_ps1(p);
+	}
+	kdb_printf("\n");
+	/* Now the real tasks */
+	kdb_do_each_thread(g, p) {
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+		if (kdb_task_state(p, mask))
+			kdb_ps1(p);
+	} kdb_while_each_thread(g, p);
+
+	return 0;
+}
+
+/*
+ * kdb_pid - This function implements the 'pid' command which switches
+ *	the currently active process.
+ *		pid [<pid> | R]
+ */
+static int kdb_pid(int argc, const char **argv)
+{
+	struct task_struct *p;
+	unsigned long val;
+	int diag;
+
+	if (argc > 1)
+		return KDB_ARGCOUNT;
+
+	if (argc) {
+		if (strcmp(argv[1], "R") == 0) {
+			p = KDB_TSK(kdb_initial_cpu);
+		} else {
+			diag = kdbgetularg(argv[1], &val);
+			if (diag)
+				return KDB_BADINT;
+
+			p = find_task_by_pid_ns((pid_t)val,	&init_pid_ns);
+			if (!p) {
+				kdb_printf("No task with pid=%d\n", (pid_t)val);
+				return 0;
+			}
+		}
+		kdb_set_current_task(p);
+	}
+	kdb_printf("KDB current process is %s(pid=%d)\n",
+		   kdb_current_task->comm,
+		   kdb_current_task->pid);
+
+	return 0;
+}
+
+/*
+ * kdb_ll - This function implements the 'll' command which follows a
+ *	linked list and executes an arbitrary command for each
+ *	element.
+ */
+static int kdb_ll(int argc, const char **argv)
+{
+	int diag;
+	unsigned long addr;
+	long offset = 0;
+	unsigned long va;
+	unsigned long linkoffset;
+	int nextarg;
+	const char *command;
+
+	if (argc != 3)
+		return KDB_ARGCOUNT;
+
+	nextarg = 1;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL);
+	if (diag)
+		return diag;
+
+	diag = kdbgetularg(argv[2], &linkoffset);
+	if (diag)
+		return diag;
+
+	/*
+	 * Using the starting address as
+	 * the first element in the list, and assuming that
+	 * the list ends with a null pointer.
+	 */
+
+	va = addr;
+	command = kdb_strdup(argv[3], GFP_KDB);
+	if (!command) {
+		kdb_printf("%s: cannot duplicate command\n", __func__);
+		return 0;
+	}
+	/* Recursive use of kdb_parse, do not use argv after this point */
+	argv = NULL;
+
+	while (va) {
+		char buf[80];
+
+		sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
+		diag = kdb_parse(buf);
+		if (diag)
+			return diag;
+
+		addr = va + linkoffset;
+		if (kdb_getword(&va, addr, sizeof(va)))
+			return 0;
+	}
+	kfree(command);
+
+	return 0;
+}
+
+static int kdb_kgdb(int argc, const char **argv)
+{
+	return KDB_CMD_KGDB;
+}
+
+/*
+ * kdb_help - This function implements the 'help' and '?' commands.
+ */
+static int kdb_help(int argc, const char **argv)
+{
+	kdbtab_t *kt;
+	int i;
+
+	kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description");
+	kdb_printf("-----------------------------"
+		   "-----------------------------\n");
+	for_each_kdbcmd(kt, i) {
+		if (kt->cmd_name)
+			kdb_printf("%-15.15s %-20.20s %s\n", kt->cmd_name,
+				   kt->cmd_usage, kt->cmd_help);
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+	}
+	return 0;
+}
+
+/*
+ * kdb_kill - This function implements the 'kill' commands.
+ */
+static int kdb_kill(int argc, const char **argv)
+{
+	long sig, pid;
+	char *endp;
+	struct task_struct *p;
+	struct siginfo info;
+
+	if (argc != 2)
+		return KDB_ARGCOUNT;
+
+	sig = simple_strtol(argv[1], &endp, 0);
+	if (*endp)
+		return KDB_BADINT;
+	if (sig >= 0) {
+		kdb_printf("Invalid signal parameter.<-signal>\n");
+		return 0;
+	}
+	sig = -sig;
+
+	pid = simple_strtol(argv[2], &endp, 0);
+	if (*endp)
+		return KDB_BADINT;
+	if (pid <= 0) {
+		kdb_printf("Process ID must be large than 0.\n");
+		return 0;
+	}
+
+	/* Find the process. */
+	p = find_task_by_pid_ns(pid, &init_pid_ns);
+	if (!p) {
+		kdb_printf("The specified process isn't found.\n");
+		return 0;
+	}
+	p = p->group_leader;
+	info.si_signo = sig;
+	info.si_errno = 0;
+	info.si_code = SI_USER;
+	info.si_pid = pid;  /* same capabilities as process being signalled */
+	info.si_uid = 0;    /* kdb has root authority */
+	kdb_send_sig_info(p, &info);
+	return 0;
+}
+
+struct kdb_tm {
+	int tm_sec;	/* seconds */
+	int tm_min;	/* minutes */
+	int tm_hour;	/* hours */
+	int tm_mday;	/* day of the month */
+	int tm_mon;	/* month */
+	int tm_year;	/* year */
+};
+
+static void kdb_gmtime(struct timespec *tv, struct kdb_tm *tm)
+{
+	/* This will work from 1970-2099, 2100 is not a leap year */
+	static int mon_day[] = { 31, 29, 31, 30, 31, 30, 31,
+				 31, 30, 31, 30, 31 };
+	memset(tm, 0, sizeof(*tm));
+	tm->tm_sec  = tv->tv_sec % (24 * 60 * 60);
+	tm->tm_mday = tv->tv_sec / (24 * 60 * 60) +
+		(2 * 365 + 1); /* shift base from 1970 to 1968 */
+	tm->tm_min =  tm->tm_sec / 60 % 60;
+	tm->tm_hour = tm->tm_sec / 60 / 60;
+	tm->tm_sec =  tm->tm_sec % 60;
+	tm->tm_year = 68 + 4*(tm->tm_mday / (4*365+1));
+	tm->tm_mday %= (4*365+1);
+	mon_day[1] = 29;
+	while (tm->tm_mday >= mon_day[tm->tm_mon]) {
+		tm->tm_mday -= mon_day[tm->tm_mon];
+		if (++tm->tm_mon == 12) {
+			tm->tm_mon = 0;
+			++tm->tm_year;
+			mon_day[1] = 28;
+		}
+	}
+	++tm->tm_mday;
+}
+
+/*
+ * Most of this code has been lifted from kernel/timer.c::sys_sysinfo().
+ * I cannot call that code directly from kdb, it has an unconditional
+ * cli()/sti() and calls routines that take locks which can stop the debugger.
+ */
+static void kdb_sysinfo(struct sysinfo *val)
+{
+	struct timespec uptime;
+	do_posix_clock_monotonic_gettime(&uptime);
+	memset(val, 0, sizeof(*val));
+	val->uptime = uptime.tv_sec;
+	val->loads[0] = avenrun[0];
+	val->loads[1] = avenrun[1];
+	val->loads[2] = avenrun[2];
+	val->procs = nr_threads-1;
+	si_meminfo(val);
+
+	return;
+}
+
+/*
+ * kdb_summary - This function implements the 'summary' command.
+ */
+static int kdb_summary(int argc, const char **argv)
+{
+	struct kdb_tm tm;
+	struct sysinfo val;
+
+	if (argc)
+		return KDB_ARGCOUNT;
+
+	kdb_printf("sysname    %s\n", init_uts_ns.name.sysname);
+	kdb_printf("release    %s\n", init_uts_ns.name.release);
+	kdb_printf("version    %s\n", init_uts_ns.name.version);
+	kdb_printf("machine    %s\n", init_uts_ns.name.machine);
+	kdb_printf("nodename   %s\n", init_uts_ns.name.nodename);
+	kdb_printf("domainname %s\n", init_uts_ns.name.domainname);
+	kdb_printf("ccversion  %s\n", __stringify(CCVERSION));
+
+	kdb_gmtime(&xtime, &tm);
+	kdb_printf("date       %04d-%02d-%02d %02d:%02d:%02d "
+		   "tz_minuteswest %d\n",
+		1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec,
+		sys_tz.tz_minuteswest);
+
+	kdb_sysinfo(&val);
+	kdb_printf("uptime     ");
+	if (val.uptime > (24*60*60)) {
+		int days = val.uptime / (24*60*60);
+		val.uptime %= (24*60*60);
+		kdb_printf("%d day%s ", days, days == 1 ? "" : "s");
+	}
+	kdb_printf("%02ld:%02ld\n", val.uptime/(60*60), (val.uptime/60)%60);
+
+	/* lifted from fs/proc/proc_misc.c::loadavg_read_proc() */
+
+#define LOAD_INT(x) ((x) >> FSHIFT)
+#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
+	kdb_printf("load avg   %ld.%02ld %ld.%02ld %ld.%02ld\n",
+		LOAD_INT(val.loads[0]), LOAD_FRAC(val.loads[0]),
+		LOAD_INT(val.loads[1]), LOAD_FRAC(val.loads[1]),
+		LOAD_INT(val.loads[2]), LOAD_FRAC(val.loads[2]));
+#undef LOAD_INT
+#undef LOAD_FRAC
+	/* Display in kilobytes */
+#define K(x) ((x) << (PAGE_SHIFT - 10))
+	kdb_printf("\nMemTotal:       %8lu kB\nMemFree:        %8lu kB\n"
+		   "Buffers:        %8lu kB\n",
+		   val.totalram, val.freeram, val.bufferram);
+	return 0;
+}
+
+/*
+ * kdb_per_cpu - This function implements the 'per_cpu' command.
+ */
+static int kdb_per_cpu(int argc, const char **argv)
+{
+	char buf[256], fmtstr[64];
+	kdb_symtab_t symtab;
+	cpumask_t suppress = CPU_MASK_NONE;
+	int cpu, diag;
+	unsigned long addr, val, bytesperword = 0, whichcpu = ~0UL;
+
+	if (argc < 1 || argc > 3)
+		return KDB_ARGCOUNT;
+
+	snprintf(buf, sizeof(buf), "per_cpu__%s", argv[1]);
+	if (!kdbgetsymval(buf, &symtab)) {
+		kdb_printf("%s is not a per_cpu variable\n", argv[1]);
+		return KDB_BADADDR;
+	}
+	if (argc >= 2) {
+		diag = kdbgetularg(argv[2], &bytesperword);
+		if (diag)
+			return diag;
+	}
+	if (!bytesperword)
+		bytesperword = KDB_WORD_SIZE;
+	else if (bytesperword > KDB_WORD_SIZE)
+		return KDB_BADWIDTH;
+	sprintf(fmtstr, "%%0%dlx ", (int)(2*bytesperword));
+	if (argc >= 3) {
+		diag = kdbgetularg(argv[3], &whichcpu);
+		if (diag)
+			return diag;
+		if (!cpu_online(whichcpu)) {
+			kdb_printf("cpu %ld is not online\n", whichcpu);
+			return KDB_BADCPUNUM;
+		}
+	}
+
+	/* Most architectures use __per_cpu_offset[cpu], some use
+	 * __per_cpu_offset(cpu), smp has no __per_cpu_offset.
+	 */
+#ifdef	__per_cpu_offset
+#define KDB_PCU(cpu) __per_cpu_offset(cpu)
+#else
+#ifdef	CONFIG_SMP
+#define KDB_PCU(cpu) __per_cpu_offset[cpu]
+#else
+#define KDB_PCU(cpu) 0
+#endif
+#endif
+
+	for_each_online_cpu(cpu) {
+		if (whichcpu != ~0UL && whichcpu != cpu)
+			continue;
+		addr = symtab.sym_start + KDB_PCU(cpu);
+		diag = kdb_getword(&val, addr, bytesperword);
+		if (diag) {
+			kdb_printf("%5d " kdb_bfd_vma_fmt0 " - unable to "
+				   "read, diag=%d\n", cpu, addr, diag);
+			continue;
+		}
+#ifdef	CONFIG_SMP
+		if (!val) {
+			cpu_set(cpu, suppress);
+			continue;
+		}
+#endif	/* CONFIG_SMP */
+		kdb_printf("%5d ", cpu);
+		kdb_md_line(fmtstr, addr,
+			bytesperword == KDB_WORD_SIZE,
+			1, bytesperword, 1, 1, 0);
+	}
+	if (cpus_weight(suppress) == 0)
+		return 0;
+	kdb_printf("Zero suppressed cpu(s):");
+	for (cpu = first_cpu(suppress); cpu < num_possible_cpus();
+	     cpu = next_cpu(cpu, suppress)) {
+		kdb_printf(" %d", cpu);
+		if (cpu == num_possible_cpus() - 1 ||
+		    next_cpu(cpu, suppress) != cpu + 1)
+			continue;
+		while (cpu < num_possible_cpus() &&
+		       next_cpu(cpu, suppress) == cpu + 1)
+			++cpu;
+		kdb_printf("-%d", cpu);
+	}
+	kdb_printf("\n");
+
+#undef KDB_PCU
+
+	return 0;
+}
+
+/*
+ * display help for the use of cmd | grep pattern
+ */
+static int kdb_grep_help(int argc, const char **argv)
+{
+	kdb_printf("Usage of  cmd args | grep pattern:\n");
+	kdb_printf("  Any command's output may be filtered through an ");
+	kdb_printf("emulated 'pipe'.\n");
+	kdb_printf("  'grep' is just a key word.\n");
+	kdb_printf("  The pattern may include a very limited set of "
+		   "metacharacters:\n");
+	kdb_printf("   pattern or ^pattern or pattern$ or ^pattern$\n");
+	kdb_printf("  And if there are spaces in the pattern, you may "
+		   "quote it:\n");
+	kdb_printf("   \"pat tern\" or \"^pat tern\" or \"pat tern$\""
+		   " or \"^pat tern$\"\n");
+	return 0;
+}
+
+/*
+ * kdb_register_repeat - This function is used to register a kernel
+ * 	debugger command.
+ * Inputs:
+ *	cmd	Command name
+ *	func	Function to execute the command
+ *	usage	A simple usage string showing arguments
+ *	help	A simple help string describing command
+ *	repeat	Does the command auto repeat on enter?
+ * Returns:
+ *	zero for success, one if a duplicate command.
+ */
+#define kdb_command_extend 50	/* arbitrary */
+int kdb_register_repeat(char *cmd,
+			kdb_func_t func,
+			char *usage,
+			char *help,
+			short minlen,
+			kdb_repeat_t repeat)
+{
+	int i;
+	kdbtab_t *kp;
+
+	/*
+	 *  Brute force method to determine duplicates
+	 */
+	for_each_kdbcmd(kp, i) {
+		if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) {
+			kdb_printf("Duplicate kdb command registered: "
+				"%s, func %p help %s\n", cmd, func, help);
+			return 1;
+		}
+	}
+
+	/*
+	 * Insert command into first available location in table
+	 */
+	for_each_kdbcmd(kp, i) {
+		if (kp->cmd_name == NULL)
+			break;
+	}
+
+	if (i >= kdb_max_commands) {
+		kdbtab_t *new = kmalloc((kdb_max_commands - KDB_BASE_CMD_MAX +
+			 kdb_command_extend) * sizeof(*new), GFP_KDB);
+		if (!new) {
+			kdb_printf("Could not allocate new kdb_command "
+				   "table\n");
+			return 1;
+		}
+		if (kdb_commands) {
+			memcpy(new, kdb_commands,
+			       kdb_max_commands * sizeof(*new));
+			kfree(kdb_commands);
+		}
+		memset(new + kdb_max_commands, 0,
+		       kdb_command_extend * sizeof(*new));
+		kdb_commands = new;
+		kp = kdb_commands + kdb_max_commands;
+		kdb_max_commands += kdb_command_extend;
+	}
+
+	kp->cmd_name   = cmd;
+	kp->cmd_func   = func;
+	kp->cmd_usage  = usage;
+	kp->cmd_help   = help;
+	kp->cmd_flags  = 0;
+	kp->cmd_minlen = minlen;
+	kp->cmd_repeat = repeat;
+
+	return 0;
+}
+
+/*
+ * kdb_register - Compatibility register function for commands that do
+ *	not need to specify a repeat state.  Equivalent to
+ *	kdb_register_repeat with KDB_REPEAT_NONE.
+ * Inputs:
+ *	cmd	Command name
+ *	func	Function to execute the command
+ *	usage	A simple usage string showing arguments
+ *	help	A simple help string describing command
+ * Returns:
+ *	zero for success, one if a duplicate command.
+ */
+int kdb_register(char *cmd,
+	     kdb_func_t func,
+	     char *usage,
+	     char *help,
+	     short minlen)
+{
+	return kdb_register_repeat(cmd, func, usage, help, minlen,
+				   KDB_REPEAT_NONE);
+}
+
+/*
+ * kdb_unregister - This function is used to unregister a kernel
+ *	debugger command.  It is generally called when a module which
+ *	implements kdb commands is unloaded.
+ * Inputs:
+ *	cmd	Command name
+ * Returns:
+ *	zero for success, one command not registered.
+ */
+int kdb_unregister(char *cmd)
+{
+	int i;
+	kdbtab_t *kp;
+
+	/*
+	 *  find the command.
+	 */
+	for (i = 0, kp = kdb_commands; i < kdb_max_commands; i++, kp++) {
+		if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) {
+			kp->cmd_name = NULL;
+			return 0;
+		}
+	}
+
+	/* Couldn't find it.  */
+	return 1;
+}
+
+/* Initialize the kdb command table. */
+static void __init kdb_inittab(void)
+{
+	int i;
+	kdbtab_t *kp;
+
+	for_each_kdbcmd(kp, i)
+		kp->cmd_name = NULL;
+
+	kdb_register_repeat("md", kdb_md, "<vaddr>",
+	  "Display Memory Contents, also mdWcN, e.g. md8c1", 1,
+			    KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("mdr", kdb_md, "<vaddr> <bytes>",
+	  "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("mdp", kdb_md, "<paddr> <bytes>",
+	  "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("mds", kdb_md, "<vaddr>",
+	  "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("mm", kdb_mm, "<vaddr> <contents>",
+	  "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("go", kdb_go, "[<vaddr>]",
+	  "Continue Execution", 1, KDB_REPEAT_NONE);
+	kdb_register_repeat("rd", kdb_rd, "",
+	  "Display Registers", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("rm", kdb_rm, "<reg> <contents>",
+	  "Modify Registers", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("ef", kdb_ef, "<vaddr>",
+	  "Display exception frame", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("bt", kdb_bt, "[<vaddr>]",
+	  "Stack traceback", 1, KDB_REPEAT_NONE);
+	kdb_register_repeat("btp", kdb_bt, "<pid>",
+	  "Display stack for process <pid>", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("bta", kdb_bt, "[DRSTCZEUIMA]",
+	  "Display stack all processes", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("btc", kdb_bt, "",
+	  "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("btt", kdb_bt, "<vaddr>",
+	  "Backtrace process given its struct task address", 0,
+			    KDB_REPEAT_NONE);
+	kdb_register_repeat("ll", kdb_ll, "<first-element> <linkoffset> <cmd>",
+	  "Execute cmd for each element in linked list", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("env", kdb_env, "",
+	  "Show environment variables", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("set", kdb_set, "",
+	  "Set environment variables", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("help", kdb_help, "",
+	  "Display Help Message", 1, KDB_REPEAT_NONE);
+	kdb_register_repeat("?", kdb_help, "",
+	  "Display Help Message", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("cpu", kdb_cpu, "<cpunum>",
+	  "Switch to new cpu", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("kgdb", kdb_kgdb, "",
+	  "Enter kgdb mode", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("ps", kdb_ps, "[<flags>|A]",
+	  "Display active task list", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("pid", kdb_pid, "<pidnum>",
+	  "Switch to another task", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("reboot", kdb_reboot, "",
+	  "Reboot the machine immediately", 0, KDB_REPEAT_NONE);
+#if defined(CONFIG_MODULES)
+	kdb_register_repeat("lsmod", kdb_lsmod, "",
+	  "List loaded kernel modules", 0, KDB_REPEAT_NONE);
+#endif
+#if defined(CONFIG_MAGIC_SYSRQ)
+	kdb_register_repeat("sr", kdb_sr, "<key>",
+	  "Magic SysRq key", 0, KDB_REPEAT_NONE);
+#endif
+#if defined(CONFIG_PRINTK)
+	kdb_register_repeat("dmesg", kdb_dmesg, "[lines]",
+	  "Display syslog buffer", 0, KDB_REPEAT_NONE);
+#endif
+	kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"",
+	  "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("kill", kdb_kill, "<-signal> <pid>",
+	  "Send a signal to a process", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("summary", kdb_summary, "",
+	  "Summarize the system", 4, KDB_REPEAT_NONE);
+	kdb_register_repeat("per_cpu", kdb_per_cpu, "",
+	  "Display per_cpu variables", 3, KDB_REPEAT_NONE);
+	kdb_register_repeat("grephelp", kdb_grep_help, "",
+	  "Display help on | grep", 0, KDB_REPEAT_NONE);
+}
+
+/* Execute any commands defined in kdb_cmds.  */
+static void __init kdb_cmd_init(void)
+{
+	int i, diag;
+	for (i = 0; kdb_cmds[i]; ++i) {
+		diag = kdb_parse(kdb_cmds[i]);
+		if (diag)
+			kdb_printf("kdb command %s failed, kdb diag %d\n",
+				kdb_cmds[i], diag);
+	}
+	if (defcmd_in_progress) {
+		kdb_printf("Incomplete 'defcmd' set, forcing endefcmd\n");
+		kdb_parse("endefcmd");
+	}
+}
+
+/* Intialize kdb_printf, breakpoint tables and kdb state */
+void __init kdb_init(int lvl)
+{
+	static int kdb_init_lvl = KDB_NOT_INITIALIZED;
+	int i;
+
+	if (kdb_init_lvl == KDB_INIT_FULL || lvl <= kdb_init_lvl)
+		return;
+	for (i = kdb_init_lvl; i < lvl; i++) {
+		switch (i) {
+		case KDB_NOT_INITIALIZED:
+			kdb_inittab();		/* Initialize Command Table */
+			kdb_initbptab();	/* Initialize Breakpoints */
+			break;
+		case KDB_INIT_EARLY:
+			kdb_cmd_init();		/* Build kdb_cmds tables */
+			break;
+		}
+	}
+	kdb_init_lvl = lvl;
+}
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
new file mode 100644
index 0000000..97d3ba6
--- /dev/null
+++ b/kernel/debug/kdb/kdb_private.h
@@ -0,0 +1,300 @@
+#ifndef _KDBPRIVATE_H
+#define _KDBPRIVATE_H
+
+/*
+ * Kernel Debugger Architecture Independent Private Headers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kgdb.h>
+#include "../debug_core.h"
+
+/* Kernel Debugger Error codes.  Must not overlap with command codes. */
+#define KDB_NOTFOUND	(-1)
+#define KDB_ARGCOUNT	(-2)
+#define KDB_BADWIDTH	(-3)
+#define KDB_BADRADIX	(-4)
+#define KDB_NOTENV	(-5)
+#define KDB_NOENVVALUE	(-6)
+#define KDB_NOTIMP	(-7)
+#define KDB_ENVFULL	(-8)
+#define KDB_ENVBUFFULL	(-9)
+#define KDB_TOOMANYBPT	(-10)
+#define KDB_TOOMANYDBREGS (-11)
+#define KDB_DUPBPT	(-12)
+#define KDB_BPTNOTFOUND	(-13)
+#define KDB_BADMODE	(-14)
+#define KDB_BADINT	(-15)
+#define KDB_INVADDRFMT  (-16)
+#define KDB_BADREG      (-17)
+#define KDB_BADCPUNUM   (-18)
+#define KDB_BADLENGTH	(-19)
+#define KDB_NOBP	(-20)
+#define KDB_BADADDR	(-21)
+
+/* Kernel Debugger Command codes.  Must not overlap with error codes. */
+#define KDB_CMD_GO	(-1001)
+#define KDB_CMD_CPU	(-1002)
+#define KDB_CMD_SS	(-1003)
+#define KDB_CMD_SSB	(-1004)
+#define KDB_CMD_KGDB (-1005)
+#define KDB_CMD_KGDB2 (-1006)
+
+/* Internal debug flags */
+#define KDB_DEBUG_FLAG_BP	0x0002	/* Breakpoint subsystem debug */
+#define KDB_DEBUG_FLAG_BB_SUMM	0x0004	/* Basic block analysis, summary only */
+#define KDB_DEBUG_FLAG_AR	0x0008	/* Activation record, generic */
+#define KDB_DEBUG_FLAG_ARA	0x0010	/* Activation record, arch specific */
+#define KDB_DEBUG_FLAG_BB	0x0020	/* All basic block analysis */
+#define KDB_DEBUG_FLAG_STATE	0x0040	/* State flags */
+#define KDB_DEBUG_FLAG_MASK	0xffff	/* All debug flags */
+#define KDB_DEBUG_FLAG_SHIFT	16	/* Shift factor for dbflags */
+
+#define KDB_DEBUG(flag)	(kdb_flags & \
+	(KDB_DEBUG_FLAG_##flag << KDB_DEBUG_FLAG_SHIFT))
+#define KDB_DEBUG_STATE(text, value) if (KDB_DEBUG(STATE)) \
+		kdb_print_state(text, value)
+
+#if BITS_PER_LONG == 32
+
+#define KDB_PLATFORM_ENV	"BYTESPERWORD=4"
+
+#define kdb_machreg_fmt		"0x%lx"
+#define kdb_machreg_fmt0	"0x%08lx"
+#define kdb_bfd_vma_fmt		"0x%lx"
+#define kdb_bfd_vma_fmt0	"0x%08lx"
+#define kdb_elfw_addr_fmt	"0x%x"
+#define kdb_elfw_addr_fmt0	"0x%08x"
+#define kdb_f_count_fmt		"%d"
+
+#elif BITS_PER_LONG == 64
+
+#define KDB_PLATFORM_ENV	"BYTESPERWORD=8"
+
+#define kdb_machreg_fmt		"0x%lx"
+#define kdb_machreg_fmt0	"0x%016lx"
+#define kdb_bfd_vma_fmt		"0x%lx"
+#define kdb_bfd_vma_fmt0	"0x%016lx"
+#define kdb_elfw_addr_fmt	"0x%x"
+#define kdb_elfw_addr_fmt0	"0x%016x"
+#define kdb_f_count_fmt		"%ld"
+
+#endif
+
+/*
+ * KDB_MAXBPT describes the total number of breakpoints
+ * supported by this architecure.
+ */
+#define KDB_MAXBPT	16
+
+/* Maximum number of arguments to a function  */
+#define KDB_MAXARGS    16
+
+typedef enum {
+	KDB_REPEAT_NONE = 0,	/* Do not repeat this command */
+	KDB_REPEAT_NO_ARGS,	/* Repeat the command without arguments */
+	KDB_REPEAT_WITH_ARGS,	/* Repeat the command including its arguments */
+} kdb_repeat_t;
+
+typedef int (*kdb_func_t)(int, const char **);
+
+/* Symbol table format returned by kallsyms. */
+typedef struct __ksymtab {
+		unsigned long value;	/* Address of symbol */
+		const char *mod_name;	/* Module containing symbol or
+					 * "kernel" */
+		unsigned long mod_start;
+		unsigned long mod_end;
+		const char *sec_name;	/* Section containing symbol */
+		unsigned long sec_start;
+		unsigned long sec_end;
+		const char *sym_name;	/* Full symbol name, including
+					 * any version */
+		unsigned long sym_start;
+		unsigned long sym_end;
+		} kdb_symtab_t;
+extern int kallsyms_symbol_next(char *prefix_name, int flag);
+extern int kallsyms_symbol_complete(char *prefix_name, int max_len);
+
+/* Exported Symbols for kernel loadable modules to use. */
+extern int kdb_register(char *, kdb_func_t, char *, char *, short);
+extern int kdb_register_repeat(char *, kdb_func_t, char *, char *,
+			       short, kdb_repeat_t);
+extern int kdb_unregister(char *);
+
+extern int kdb_getarea_size(void *, unsigned long, size_t);
+extern int kdb_putarea_size(unsigned long, void *, size_t);
+
+/*
+ * Like get_user and put_user, kdb_getarea and kdb_putarea take variable
+ * names, not pointers.  The underlying *_size functions take pointers.
+ */
+#define kdb_getarea(x, addr) kdb_getarea_size(&(x), addr, sizeof((x)))
+#define kdb_putarea(addr, x) kdb_putarea_size(addr, &(x), sizeof((x)))
+
+extern int kdb_getphysword(unsigned long *word,
+			unsigned long addr, size_t size);
+extern int kdb_getword(unsigned long *, unsigned long, size_t);
+extern int kdb_putword(unsigned long, unsigned long, size_t);
+
+extern int kdbgetularg(const char *, unsigned long *);
+extern int kdb_set(int, const char **);
+extern char *kdbgetenv(const char *);
+extern int kdbgetintenv(const char *, int *);
+extern int kdbgetaddrarg(int, const char **, int*, unsigned long *,
+			 long *, char **);
+extern int kdbgetsymval(const char *, kdb_symtab_t *);
+extern int kdbnearsym(unsigned long, kdb_symtab_t *);
+extern void kdbnearsym_cleanup(void);
+extern char *kdb_strdup(const char *str, gfp_t type);
+extern void kdb_symbol_print(unsigned long, const kdb_symtab_t *, unsigned int);
+
+/* Routine for debugging the debugger state. */
+extern void kdb_print_state(const char *, int);
+
+extern int kdb_state;
+#define KDB_STATE_KDB		0x00000001	/* Cpu is inside kdb */
+#define KDB_STATE_LEAVING	0x00000002	/* Cpu is leaving kdb */
+#define KDB_STATE_CMD		0x00000004	/* Running a kdb command */
+#define KDB_STATE_KDB_CONTROL	0x00000008	/* This cpu is under
+						 * kdb control */
+#define KDB_STATE_HOLD_CPU	0x00000010	/* Hold this cpu inside kdb */
+#define KDB_STATE_DOING_SS	0x00000020	/* Doing ss command */
+#define KDB_STATE_DOING_SSB	0x00000040	/* Doing ssb command,
+						 * DOING_SS is also set */
+#define KDB_STATE_SSBPT		0x00000080	/* Install breakpoint
+						 * after one ss, independent of
+						 * DOING_SS */
+#define KDB_STATE_REENTRY	0x00000100	/* Valid re-entry into kdb */
+#define KDB_STATE_SUPPRESS	0x00000200	/* Suppress error messages */
+#define KDB_STATE_PAGER		0x00000400	/* pager is available */
+#define KDB_STATE_GO_SWITCH	0x00000800	/* go is switching
+						 * back to initial cpu */
+#define KDB_STATE_PRINTF_LOCK	0x00001000	/* Holds kdb_printf lock */
+#define KDB_STATE_WAIT_IPI	0x00002000	/* Waiting for kdb_ipi() NMI */
+#define KDB_STATE_RECURSE	0x00004000	/* Recursive entry to kdb */
+#define KDB_STATE_IP_ADJUSTED	0x00008000	/* Restart IP has been
+						 * adjusted */
+#define KDB_STATE_GO1		0x00010000	/* go only releases one cpu */
+#define KDB_STATE_KEYBOARD	0x00020000	/* kdb entered via
+						 * keyboard on this cpu */
+#define KDB_STATE_KEXEC		0x00040000	/* kexec issued */
+#define KDB_STATE_DOING_KGDB	0x00080000	/* kgdb enter now issued */
+#define KDB_STATE_DOING_KGDB2	0x00100000	/* kgdb enter now issued */
+#define KDB_STATE_KGDB_TRANS	0x00200000	/* Transition to kgdb */
+#define KDB_STATE_ARCH		0xff000000	/* Reserved for arch
+						 * specific use */
+
+#define KDB_STATE(flag) (kdb_state & KDB_STATE_##flag)
+#define KDB_STATE_SET(flag) ((void)(kdb_state |= KDB_STATE_##flag))
+#define KDB_STATE_CLEAR(flag) ((void)(kdb_state &= ~KDB_STATE_##flag))
+
+extern int kdb_nextline; /* Current number of lines displayed */
+
+typedef struct _kdb_bp {
+	unsigned long	bp_addr;	/* Address breakpoint is present at */
+	unsigned int	bp_free:1;	/* This entry is available */
+	unsigned int	bp_enabled:1;	/* Breakpoint is active in register */
+	unsigned int	bp_type:4;	/* Uses hardware register */
+	unsigned int	bp_installed:1;	/* Breakpoint is installed */
+	unsigned int	bp_delay:1;	/* Do delayed bp handling */
+	unsigned int	bp_delayed:1;	/* Delayed breakpoint */
+	unsigned int	bph_length;	/* HW break length */
+} kdb_bp_t;
+
+#ifdef CONFIG_KGDB_KDB
+extern kdb_bp_t kdb_breakpoints[/* KDB_MAXBPT */];
+
+/* The KDB shell command table */
+typedef struct _kdbtab {
+	char    *cmd_name;		/* Command name */
+	kdb_func_t cmd_func;		/* Function to execute command */
+	char    *cmd_usage;		/* Usage String for this command */
+	char    *cmd_help;		/* Help message for this command */
+	short    cmd_flags;		/* Parsing flags */
+	short    cmd_minlen;		/* Minimum legal # command
+					 * chars required */
+	kdb_repeat_t cmd_repeat;	/* Does command auto repeat on enter? */
+} kdbtab_t;
+
+extern int kdb_bt(int, const char **);	/* KDB display back trace */
+
+/* KDB breakpoint management functions */
+extern void kdb_initbptab(void);
+extern void kdb_bp_install(struct pt_regs *);
+extern void kdb_bp_remove(void);
+
+typedef enum {
+	KDB_DB_BPT,	/* Breakpoint */
+	KDB_DB_SS,	/* Single-step trap */
+	KDB_DB_SSB,	/* Single step to branch */
+	KDB_DB_SSBPT,	/* Single step over breakpoint */
+	KDB_DB_NOBPT	/* Spurious breakpoint */
+} kdb_dbtrap_t;
+
+extern int kdb_main_loop(kdb_reason_t, kdb_reason_t,
+			 int, kdb_dbtrap_t, struct pt_regs *);
+
+/* Miscellaneous functions and data areas */
+extern int kdb_grepping_flag;
+extern char kdb_grep_string[];
+extern int kdb_grep_leading;
+extern int kdb_grep_trailing;
+extern char *kdb_cmds[];
+extern void kdb_syslog_data(char *syslog_data[]);
+extern unsigned long kdb_task_state_string(const char *);
+extern char kdb_task_state_char (const struct task_struct *);
+extern unsigned long kdb_task_state(const struct task_struct *p,
+				    unsigned long mask);
+extern void kdb_ps_suppressed(void);
+extern void kdb_ps1(const struct task_struct *p);
+extern void kdb_print_nameval(const char *name, unsigned long val);
+extern void kdb_send_sig_info(struct task_struct *p, struct siginfo *info);
+extern void kdb_meminfo_proc_show(void);
+extern const char *kdb_walk_kallsyms(loff_t *pos);
+extern char *kdb_getstr(char *, size_t, char *);
+
+/* Defines for kdb_symbol_print */
+#define KDB_SP_SPACEB	0x0001		/* Space before string */
+#define KDB_SP_SPACEA	0x0002		/* Space after string */
+#define KDB_SP_PAREN	0x0004		/* Parenthesis around string */
+#define KDB_SP_VALUE	0x0008		/* Print the value of the address */
+#define KDB_SP_SYMSIZE	0x0010		/* Print the size of the symbol */
+#define KDB_SP_NEWLINE	0x0020		/* Newline after string */
+#define KDB_SP_DEFAULT (KDB_SP_VALUE|KDB_SP_PAREN)
+
+#define KDB_TSK(cpu) kgdb_info[cpu].task
+#define KDB_TSKREGS(cpu) kgdb_info[cpu].debuggerinfo
+
+extern struct task_struct *kdb_curr_task(int);
+
+#define kdb_task_has_cpu(p) (task_curr(p))
+
+/* Simplify coexistence with NPTL */
+#define	kdb_do_each_thread(g, p) do_each_thread(g, p)
+#define	kdb_while_each_thread(g, p) while_each_thread(g, p)
+
+#define GFP_KDB (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
+
+extern void *debug_kmalloc(size_t size, gfp_t flags);
+extern void debug_kfree(void *);
+extern void debug_kusage(void);
+
+extern void kdb_set_current_task(struct task_struct *);
+extern struct task_struct *kdb_current_task;
+#ifdef CONFIG_MODULES
+extern struct list_head *kdb_modules;
+#endif /* CONFIG_MODULES */
+
+extern char kdb_prompt_str[];
+
+#define	KDB_WORD_SIZE	((int)sizeof(unsigned long))
+
+#endif /* CONFIG_KGDB_KDB */
+#endif	/* !_KDBPRIVATE_H */
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
new file mode 100644
index 0000000..45344d5
--- /dev/null
+++ b/kernel/debug/kdb/kdb_support.c
@@ -0,0 +1,927 @@
+/*
+ * Kernel Debugger Architecture Independent Support Functions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ * 03/02/13    added new 2.5 kallsyms <xavier.bru@bull.net>
+ */
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kallsyms.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/ptrace.h>
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/hardirq.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/kdb.h>
+#include <linux/slab.h>
+#include "kdb_private.h"
+
+/*
+ * kdbgetsymval - Return the address of the given symbol.
+ *
+ * Parameters:
+ *	symname	Character string containing symbol name
+ *      symtab  Structure to receive results
+ * Returns:
+ *	0	Symbol not found, symtab zero filled
+ *	1	Symbol mapped to module/symbol/section, data in symtab
+ */
+int kdbgetsymval(const char *symname, kdb_symtab_t *symtab)
+{
+	if (KDB_DEBUG(AR))
+		kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname,
+			   symtab);
+	memset(symtab, 0, sizeof(*symtab));
+	symtab->sym_start = kallsyms_lookup_name(symname);
+	if (symtab->sym_start) {
+		if (KDB_DEBUG(AR))
+			kdb_printf("kdbgetsymval: returns 1, "
+				   "symtab->sym_start=0x%lx\n",
+				   symtab->sym_start);
+		return 1;
+	}
+	if (KDB_DEBUG(AR))
+		kdb_printf("kdbgetsymval: returns 0\n");
+	return 0;
+}
+EXPORT_SYMBOL(kdbgetsymval);
+
+static char *kdb_name_table[100];	/* arbitrary size */
+
+/*
+ * kdbnearsym -	Return the name of the symbol with the nearest address
+ *	less than 'addr'.
+ *
+ * Parameters:
+ *	addr	Address to check for symbol near
+ *	symtab  Structure to receive results
+ * Returns:
+ *	0	No sections contain this address, symtab zero filled
+ *	1	Address mapped to module/symbol/section, data in symtab
+ * Remarks:
+ *	2.6 kallsyms has a "feature" where it unpacks the name into a
+ *	string.  If that string is reused before the caller expects it
+ *	then the caller sees its string change without warning.  To
+ *	avoid cluttering up the main kdb code with lots of kdb_strdup,
+ *	tests and kfree calls, kdbnearsym maintains an LRU list of the
+ *	last few unique strings.  The list is sized large enough to
+ *	hold active strings, no kdb caller of kdbnearsym makes more
+ *	than ~20 later calls before using a saved value.
+ */
+int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab)
+{
+	int ret = 0;
+	unsigned long symbolsize;
+	unsigned long offset;
+#define knt1_size 128		/* must be >= kallsyms table size */
+	char *knt1 = NULL;
+
+	if (KDB_DEBUG(AR))
+		kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab);
+	memset(symtab, 0, sizeof(*symtab));
+
+	if (addr < 4096)
+		goto out;
+	knt1 = debug_kmalloc(knt1_size, GFP_ATOMIC);
+	if (!knt1) {
+		kdb_printf("kdbnearsym: addr=0x%lx cannot kmalloc knt1\n",
+			   addr);
+		goto out;
+	}
+	symtab->sym_name = kallsyms_lookup(addr, &symbolsize , &offset,
+				(char **)(&symtab->mod_name), knt1);
+	if (offset > 8*1024*1024) {
+		symtab->sym_name = NULL;
+		addr = offset = symbolsize = 0;
+	}
+	symtab->sym_start = addr - offset;
+	symtab->sym_end = symtab->sym_start + symbolsize;
+	ret = symtab->sym_name != NULL && *(symtab->sym_name) != '\0';
+
+	if (ret) {
+		int i;
+		/* Another 2.6 kallsyms "feature".  Sometimes the sym_name is
+		 * set but the buffer passed into kallsyms_lookup is not used,
+		 * so it contains garbage.  The caller has to work out which
+		 * buffer needs to be saved.
+		 *
+		 * What was Rusty smoking when he wrote that code?
+		 */
+		if (symtab->sym_name != knt1) {
+			strncpy(knt1, symtab->sym_name, knt1_size);
+			knt1[knt1_size-1] = '\0';
+		}
+		for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) {
+			if (kdb_name_table[i] &&
+			    strcmp(kdb_name_table[i], knt1) == 0)
+				break;
+		}
+		if (i >= ARRAY_SIZE(kdb_name_table)) {
+			debug_kfree(kdb_name_table[0]);
+			memcpy(kdb_name_table, kdb_name_table+1,
+			       sizeof(kdb_name_table[0]) *
+			       (ARRAY_SIZE(kdb_name_table)-1));
+		} else {
+			debug_kfree(knt1);
+			knt1 = kdb_name_table[i];
+			memcpy(kdb_name_table+i, kdb_name_table+i+1,
+			       sizeof(kdb_name_table[0]) *
+			       (ARRAY_SIZE(kdb_name_table)-i-1));
+		}
+		i = ARRAY_SIZE(kdb_name_table) - 1;
+		kdb_name_table[i] = knt1;
+		symtab->sym_name = kdb_name_table[i];
+		knt1 = NULL;
+	}
+
+	if (symtab->mod_name == NULL)
+		symtab->mod_name = "kernel";
+	if (KDB_DEBUG(AR))
+		kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, "
+		   "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret,
+		   symtab->sym_start, symtab->mod_name, symtab->sym_name,
+		   symtab->sym_name);
+
+out:
+	debug_kfree(knt1);
+	return ret;
+}
+
+void kdbnearsym_cleanup(void)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) {
+		if (kdb_name_table[i]) {
+			debug_kfree(kdb_name_table[i]);
+			kdb_name_table[i] = NULL;
+		}
+	}
+}
+
+static char ks_namebuf[KSYM_NAME_LEN+1], ks_namebuf_prev[KSYM_NAME_LEN+1];
+
+/*
+ * kallsyms_symbol_complete
+ *
+ * Parameters:
+ *	prefix_name	prefix of a symbol name to lookup
+ *	max_len		maximum length that can be returned
+ * Returns:
+ *	Number of symbols which match the given prefix.
+ * Notes:
+ *	prefix_name is changed to contain the longest unique prefix that
+ *	starts with this prefix (tab completion).
+ */
+int kallsyms_symbol_complete(char *prefix_name, int max_len)
+{
+	loff_t pos = 0;
+	int prefix_len = strlen(prefix_name), prev_len = 0;
+	int i, number = 0;
+	const char *name;
+
+	while ((name = kdb_walk_kallsyms(&pos))) {
+		if (strncmp(name, prefix_name, prefix_len) == 0) {
+			strcpy(ks_namebuf, name);
+			/* Work out the longest name that matches the prefix */
+			if (++number == 1) {
+				prev_len = min_t(int, max_len-1,
+						 strlen(ks_namebuf));
+				memcpy(ks_namebuf_prev, ks_namebuf, prev_len);
+				ks_namebuf_prev[prev_len] = '\0';
+				continue;
+			}
+			for (i = 0; i < prev_len; i++) {
+				if (ks_namebuf[i] != ks_namebuf_prev[i]) {
+					prev_len = i;
+					ks_namebuf_prev[i] = '\0';
+					break;
+				}
+			}
+		}
+	}
+	if (prev_len > prefix_len)
+		memcpy(prefix_name, ks_namebuf_prev, prev_len+1);
+	return number;
+}
+
+/*
+ * kallsyms_symbol_next
+ *
+ * Parameters:
+ *	prefix_name	prefix of a symbol name to lookup
+ *	flag	0 means search from the head, 1 means continue search.
+ * Returns:
+ *	1 if a symbol matches the given prefix.
+ *	0 if no string found
+ */
+int kallsyms_symbol_next(char *prefix_name, int flag)
+{
+	int prefix_len = strlen(prefix_name);
+	static loff_t pos;
+	const char *name;
+
+	if (!flag)
+		pos = 0;
+
+	while ((name = kdb_walk_kallsyms(&pos))) {
+		if (strncmp(name, prefix_name, prefix_len) == 0) {
+			strncpy(prefix_name, name, strlen(name)+1);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * kdb_symbol_print - Standard method for printing a symbol name and offset.
+ * Inputs:
+ *	addr	Address to be printed.
+ *	symtab	Address of symbol data, if NULL this routine does its
+ *		own lookup.
+ *	punc	Punctuation for string, bit field.
+ * Remarks:
+ *	The string and its punctuation is only printed if the address
+ *	is inside the kernel, except that the value is always printed
+ *	when requested.
+ */
+void kdb_symbol_print(unsigned long addr, const kdb_symtab_t *symtab_p,
+		      unsigned int punc)
+{
+	kdb_symtab_t symtab, *symtab_p2;
+	if (symtab_p) {
+		symtab_p2 = (kdb_symtab_t *)symtab_p;
+	} else {
+		symtab_p2 = &symtab;
+		kdbnearsym(addr, symtab_p2);
+	}
+	if (!(symtab_p2->sym_name || (punc & KDB_SP_VALUE)))
+		return;
+	if (punc & KDB_SP_SPACEB)
+		kdb_printf(" ");
+	if (punc & KDB_SP_VALUE)
+		kdb_printf(kdb_machreg_fmt0, addr);
+	if (symtab_p2->sym_name) {
+		if (punc & KDB_SP_VALUE)
+			kdb_printf(" ");
+		if (punc & KDB_SP_PAREN)
+			kdb_printf("(");
+		if (strcmp(symtab_p2->mod_name, "kernel"))
+			kdb_printf("[%s]", symtab_p2->mod_name);
+		kdb_printf("%s", symtab_p2->sym_name);
+		if (addr != symtab_p2->sym_start)
+			kdb_printf("+0x%lx", addr - symtab_p2->sym_start);
+		if (punc & KDB_SP_SYMSIZE)
+			kdb_printf("/0x%lx",
+				   symtab_p2->sym_end - symtab_p2->sym_start);
+		if (punc & KDB_SP_PAREN)
+			kdb_printf(")");
+	}
+	if (punc & KDB_SP_SPACEA)
+		kdb_printf(" ");
+	if (punc & KDB_SP_NEWLINE)
+		kdb_printf("\n");
+}
+
+/*
+ * kdb_strdup - kdb equivalent of strdup, for disasm code.
+ * Inputs:
+ *	str	The string to duplicate.
+ *	type	Flags to kmalloc for the new string.
+ * Returns:
+ *	Address of the new string, NULL if storage could not be allocated.
+ * Remarks:
+ *	This is not in lib/string.c because it uses kmalloc which is not
+ *	available when string.o is used in boot loaders.
+ */
+char *kdb_strdup(const char *str, gfp_t type)
+{
+	int n = strlen(str)+1;
+	char *s = kmalloc(n, type);
+	if (!s)
+		return NULL;
+	return strcpy(s, str);
+}
+
+/*
+ * kdb_getarea_size - Read an area of data.  The kdb equivalent of
+ *	copy_from_user, with kdb messages for invalid addresses.
+ * Inputs:
+ *	res	Pointer to the area to receive the result.
+ *	addr	Address of the area to copy.
+ *	size	Size of the area.
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+int kdb_getarea_size(void *res, unsigned long addr, size_t size)
+{
+	int ret = probe_kernel_read((char *)res, (char *)addr, size);
+	if (ret) {
+		if (!KDB_STATE(SUPPRESS)) {
+			kdb_printf("kdb_getarea: Bad address 0x%lx\n", addr);
+			KDB_STATE_SET(SUPPRESS);
+		}
+		ret = KDB_BADADDR;
+	} else {
+		KDB_STATE_CLEAR(SUPPRESS);
+	}
+	return ret;
+}
+
+/*
+ * kdb_putarea_size - Write an area of data.  The kdb equivalent of
+ *	copy_to_user, with kdb messages for invalid addresses.
+ * Inputs:
+ *	addr	Address of the area to write to.
+ *	res	Pointer to the area holding the data.
+ *	size	Size of the area.
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+int kdb_putarea_size(unsigned long addr, void *res, size_t size)
+{
+	int ret = probe_kernel_read((char *)addr, (char *)res, size);
+	if (ret) {
+		if (!KDB_STATE(SUPPRESS)) {
+			kdb_printf("kdb_putarea: Bad address 0x%lx\n", addr);
+			KDB_STATE_SET(SUPPRESS);
+		}
+		ret = KDB_BADADDR;
+	} else {
+		KDB_STATE_CLEAR(SUPPRESS);
+	}
+	return ret;
+}
+
+/*
+ * kdb_getphys - Read data from a physical address. Validate the
+ * 	address is in range, use kmap_atomic() to get data
+ * 	similar to kdb_getarea() - but for phys addresses
+ * Inputs:
+ * 	res	Pointer to the word to receive the result
+ * 	addr	Physical address of the area to copy
+ * 	size	Size of the area
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+static int kdb_getphys(void *res, unsigned long addr, size_t size)
+{
+	unsigned long pfn;
+	void *vaddr;
+	struct page *page;
+
+	pfn = (addr >> PAGE_SHIFT);
+	if (!pfn_valid(pfn))
+		return 1;
+	page = pfn_to_page(pfn);
+	vaddr = kmap_atomic(page, KM_KDB);
+	memcpy(res, vaddr + (addr & (PAGE_SIZE - 1)), size);
+	kunmap_atomic(vaddr, KM_KDB);
+
+	return 0;
+}
+
+/*
+ * kdb_getphysword
+ * Inputs:
+ *	word	Pointer to the word to receive the result.
+ *	addr	Address of the area to copy.
+ *	size	Size of the area.
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+int kdb_getphysword(unsigned long *word, unsigned long addr, size_t size)
+{
+	int diag;
+	__u8  w1;
+	__u16 w2;
+	__u32 w4;
+	__u64 w8;
+	*word = 0;	/* Default value if addr or size is invalid */
+
+	switch (size) {
+	case 1:
+		diag = kdb_getphys(&w1, addr, sizeof(w1));
+		if (!diag)
+			*word = w1;
+		break;
+	case 2:
+		diag = kdb_getphys(&w2, addr, sizeof(w2));
+		if (!diag)
+			*word = w2;
+		break;
+	case 4:
+		diag = kdb_getphys(&w4, addr, sizeof(w4));
+		if (!diag)
+			*word = w4;
+		break;
+	case 8:
+		if (size <= sizeof(*word)) {
+			diag = kdb_getphys(&w8, addr, sizeof(w8));
+			if (!diag)
+				*word = w8;
+			break;
+		}
+		/* drop through */
+	default:
+		diag = KDB_BADWIDTH;
+		kdb_printf("kdb_getphysword: bad width %ld\n", (long) size);
+	}
+	return diag;
+}
+
+/*
+ * kdb_getword - Read a binary value.  Unlike kdb_getarea, this treats
+ *	data as numbers.
+ * Inputs:
+ *	word	Pointer to the word to receive the result.
+ *	addr	Address of the area to copy.
+ *	size	Size of the area.
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+int kdb_getword(unsigned long *word, unsigned long addr, size_t size)
+{
+	int diag;
+	__u8  w1;
+	__u16 w2;
+	__u32 w4;
+	__u64 w8;
+	*word = 0;	/* Default value if addr or size is invalid */
+	switch (size) {
+	case 1:
+		diag = kdb_getarea(w1, addr);
+		if (!diag)
+			*word = w1;
+		break;
+	case 2:
+		diag = kdb_getarea(w2, addr);
+		if (!diag)
+			*word = w2;
+		break;
+	case 4:
+		diag = kdb_getarea(w4, addr);
+		if (!diag)
+			*word = w4;
+		break;
+	case 8:
+		if (size <= sizeof(*word)) {
+			diag = kdb_getarea(w8, addr);
+			if (!diag)
+				*word = w8;
+			break;
+		}
+		/* drop through */
+	default:
+		diag = KDB_BADWIDTH;
+		kdb_printf("kdb_getword: bad width %ld\n", (long) size);
+	}
+	return diag;
+}
+
+/*
+ * kdb_putword - Write a binary value.  Unlike kdb_putarea, this
+ *	treats data as numbers.
+ * Inputs:
+ *	addr	Address of the area to write to..
+ *	word	The value to set.
+ *	size	Size of the area.
+ * Returns:
+ *	0 for success, < 0 for error.
+ */
+int kdb_putword(unsigned long addr, unsigned long word, size_t size)
+{
+	int diag;
+	__u8  w1;
+	__u16 w2;
+	__u32 w4;
+	__u64 w8;
+	switch (size) {
+	case 1:
+		w1 = word;
+		diag = kdb_putarea(addr, w1);
+		break;
+	case 2:
+		w2 = word;
+		diag = kdb_putarea(addr, w2);
+		break;
+	case 4:
+		w4 = word;
+		diag = kdb_putarea(addr, w4);
+		break;
+	case 8:
+		if (size <= sizeof(word)) {
+			w8 = word;
+			diag = kdb_putarea(addr, w8);
+			break;
+		}
+		/* drop through */
+	default:
+		diag = KDB_BADWIDTH;
+		kdb_printf("kdb_putword: bad width %ld\n", (long) size);
+	}
+	return diag;
+}
+
+/*
+ * kdb_task_state_string - Convert a string containing any of the
+ *	letters DRSTCZEUIMA to a mask for the process state field and
+ *	return the value.  If no argument is supplied, return the mask
+ *	that corresponds to environment variable PS, DRSTCZEU by
+ *	default.
+ * Inputs:
+ *	s	String to convert
+ * Returns:
+ *	Mask for process state.
+ * Notes:
+ *	The mask folds data from several sources into a single long value, so
+ *	be carefull not to overlap the bits.  TASK_* bits are in the LSB,
+ *	special cases like UNRUNNABLE are in the MSB.  As of 2.6.10-rc1 there
+ *	is no overlap between TASK_* and EXIT_* but that may not always be
+ *	true, so EXIT_* bits are shifted left 16 bits before being stored in
+ *	the mask.
+ */
+
+/* unrunnable is < 0 */
+#define UNRUNNABLE	(1UL << (8*sizeof(unsigned long) - 1))
+#define RUNNING		(1UL << (8*sizeof(unsigned long) - 2))
+#define IDLE		(1UL << (8*sizeof(unsigned long) - 3))
+#define DAEMON		(1UL << (8*sizeof(unsigned long) - 4))
+
+unsigned long kdb_task_state_string(const char *s)
+{
+	long res = 0;
+	if (!s) {
+		s = kdbgetenv("PS");
+		if (!s)
+			s = "DRSTCZEU";	/* default value for ps */
+	}
+	while (*s) {
+		switch (*s) {
+		case 'D':
+			res |= TASK_UNINTERRUPTIBLE;
+			break;
+		case 'R':
+			res |= RUNNING;
+			break;
+		case 'S':
+			res |= TASK_INTERRUPTIBLE;
+			break;
+		case 'T':
+			res |= TASK_STOPPED;
+			break;
+		case 'C':
+			res |= TASK_TRACED;
+			break;
+		case 'Z':
+			res |= EXIT_ZOMBIE << 16;
+			break;
+		case 'E':
+			res |= EXIT_DEAD << 16;
+			break;
+		case 'U':
+			res |= UNRUNNABLE;
+			break;
+		case 'I':
+			res |= IDLE;
+			break;
+		case 'M':
+			res |= DAEMON;
+			break;
+		case 'A':
+			res = ~0UL;
+			break;
+		default:
+			  kdb_printf("%s: unknown flag '%c' ignored\n",
+				     __func__, *s);
+			  break;
+		}
+		++s;
+	}
+	return res;
+}
+
+/*
+ * kdb_task_state_char - Return the character that represents the task state.
+ * Inputs:
+ *	p	struct task for the process
+ * Returns:
+ *	One character to represent the task state.
+ */
+char kdb_task_state_char (const struct task_struct *p)
+{
+	int cpu;
+	char state;
+	unsigned long tmp;
+
+	if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long)))
+		return 'E';
+
+	cpu = kdb_process_cpu(p);
+	state = (p->state == 0) ? 'R' :
+		(p->state < 0) ? 'U' :
+		(p->state & TASK_UNINTERRUPTIBLE) ? 'D' :
+		(p->state & TASK_STOPPED) ? 'T' :
+		(p->state & TASK_TRACED) ? 'C' :
+		(p->exit_state & EXIT_ZOMBIE) ? 'Z' :
+		(p->exit_state & EXIT_DEAD) ? 'E' :
+		(p->state & TASK_INTERRUPTIBLE) ? 'S' : '?';
+	if (p->pid == 0) {
+		/* Idle task.  Is it really idle, apart from the kdb
+		 * interrupt? */
+		if (!kdb_task_has_cpu(p) || kgdb_info[cpu].irq_depth == 1) {
+			if (cpu != kdb_initial_cpu)
+				state = 'I';	/* idle task */
+		}
+	} else if (!p->mm && state == 'S') {
+		state = 'M';	/* sleeping system daemon */
+	}
+	return state;
+}
+
+/*
+ * kdb_task_state - Return true if a process has the desired state
+ *	given by the mask.
+ * Inputs:
+ *	p	struct task for the process
+ *	mask	mask from kdb_task_state_string to select processes
+ * Returns:
+ *	True if the process matches at least one criteria defined by the mask.
+ */
+unsigned long kdb_task_state(const struct task_struct *p, unsigned long mask)
+{
+	char state[] = { kdb_task_state_char(p), '\0' };
+	return (mask & kdb_task_state_string(state)) != 0;
+}
+
+/*
+ * kdb_print_nameval - Print a name and its value, converting the
+ *	value to a symbol lookup if possible.
+ * Inputs:
+ *	name	field name to print
+ *	val	value of field
+ */
+void kdb_print_nameval(const char *name, unsigned long val)
+{
+	kdb_symtab_t symtab;
+	kdb_printf("  %-11.11s ", name);
+	if (kdbnearsym(val, &symtab))
+		kdb_symbol_print(val, &symtab,
+				 KDB_SP_VALUE|KDB_SP_SYMSIZE|KDB_SP_NEWLINE);
+	else
+		kdb_printf("0x%lx\n", val);
+}
+
+/* Last ditch allocator for debugging, so we can still debug even when
+ * the GFP_ATOMIC pool has been exhausted.  The algorithms are tuned
+ * for space usage, not for speed.  One smallish memory pool, the free
+ * chain is always in ascending address order to allow coalescing,
+ * allocations are done in brute force best fit.
+ */
+
+struct debug_alloc_header {
+	u32 next;	/* offset of next header from start of pool */
+	u32 size;
+	void *caller;
+};
+
+/* The memory returned by this allocator must be aligned, which means
+ * so must the header size.  Do not assume that sizeof(struct
+ * debug_alloc_header) is a multiple of the alignment, explicitly
+ * calculate the overhead of this header, including the alignment.
+ * The rest of this code must not use sizeof() on any header or
+ * pointer to a header.
+ */
+#define dah_align 8
+#define dah_overhead ALIGN(sizeof(struct debug_alloc_header), dah_align)
+
+static u64 debug_alloc_pool_aligned[256*1024/dah_align];	/* 256K pool */
+static char *debug_alloc_pool = (char *)debug_alloc_pool_aligned;
+static u32 dah_first, dah_first_call = 1, dah_used, dah_used_max;
+
+/* Locking is awkward.  The debug code is called from all contexts,
+ * including non maskable interrupts.  A normal spinlock is not safe
+ * in NMI context.  Try to get the debug allocator lock, if it cannot
+ * be obtained after a second then give up.  If the lock could not be
+ * previously obtained on this cpu then only try once.
+ *
+ * sparse has no annotation for "this function _sometimes_ acquires a
+ * lock", so fudge the acquire/release notation.
+ */
+static DEFINE_SPINLOCK(dap_lock);
+static int get_dap_lock(void)
+	__acquires(dap_lock)
+{
+	static int dap_locked = -1;
+	int count;
+	if (dap_locked == smp_processor_id())
+		count = 1;
+	else
+		count = 1000;
+	while (1) {
+		if (spin_trylock(&dap_lock)) {
+			dap_locked = -1;
+			return 1;
+		}
+		if (!count--)
+			break;
+		udelay(1000);
+	}
+	dap_locked = smp_processor_id();
+	__acquire(dap_lock);
+	return 0;
+}
+
+void *debug_kmalloc(size_t size, gfp_t flags)
+{
+	unsigned int rem, h_offset;
+	struct debug_alloc_header *best, *bestprev, *prev, *h;
+	void *p = NULL;
+	if (!get_dap_lock()) {
+		__release(dap_lock);	/* we never actually got it */
+		return NULL;
+	}
+	h = (struct debug_alloc_header *)(debug_alloc_pool + dah_first);
+	if (dah_first_call) {
+		h->size = sizeof(debug_alloc_pool_aligned) - dah_overhead;
+		dah_first_call = 0;
+	}
+	size = ALIGN(size, dah_align);
+	prev = best = bestprev = NULL;
+	while (1) {
+		if (h->size >= size && (!best || h->size < best->size)) {
+			best = h;
+			bestprev = prev;
+			if (h->size == size)
+				break;
+		}
+		if (!h->next)
+			break;
+		prev = h;
+		h = (struct debug_alloc_header *)(debug_alloc_pool + h->next);
+	}
+	if (!best)
+		goto out;
+	rem = best->size - size;
+	/* The pool must always contain at least one header */
+	if (best->next == 0 && bestprev == NULL && rem < dah_overhead)
+		goto out;
+	if (rem >= dah_overhead) {
+		best->size = size;
+		h_offset = ((char *)best - debug_alloc_pool) +
+			   dah_overhead + best->size;
+		h = (struct debug_alloc_header *)(debug_alloc_pool + h_offset);
+		h->size = rem - dah_overhead;
+		h->next = best->next;
+	} else
+		h_offset = best->next;
+	best->caller = __builtin_return_address(0);
+	dah_used += best->size;
+	dah_used_max = max(dah_used, dah_used_max);
+	if (bestprev)
+		bestprev->next = h_offset;
+	else
+		dah_first = h_offset;
+	p = (char *)best + dah_overhead;
+	memset(p, POISON_INUSE, best->size - 1);
+	*((char *)p + best->size - 1) = POISON_END;
+out:
+	spin_unlock(&dap_lock);
+	return p;
+}
+
+void debug_kfree(void *p)
+{
+	struct debug_alloc_header *h;
+	unsigned int h_offset;
+	if (!p)
+		return;
+	if ((char *)p < debug_alloc_pool ||
+	    (char *)p >= debug_alloc_pool + sizeof(debug_alloc_pool_aligned)) {
+		kfree(p);
+		return;
+	}
+	if (!get_dap_lock()) {
+		__release(dap_lock);	/* we never actually got it */
+		return;		/* memory leak, cannot be helped */
+	}
+	h = (struct debug_alloc_header *)((char *)p - dah_overhead);
+	memset(p, POISON_FREE, h->size - 1);
+	*((char *)p + h->size - 1) = POISON_END;
+	h->caller = NULL;
+	dah_used -= h->size;
+	h_offset = (char *)h - debug_alloc_pool;
+	if (h_offset < dah_first) {
+		h->next = dah_first;
+		dah_first = h_offset;
+	} else {
+		struct debug_alloc_header *prev;
+		unsigned int prev_offset;
+		prev = (struct debug_alloc_header *)(debug_alloc_pool +
+						     dah_first);
+		while (1) {
+			if (!prev->next || prev->next > h_offset)
+				break;
+			prev = (struct debug_alloc_header *)
+				(debug_alloc_pool + prev->next);
+		}
+		prev_offset = (char *)prev - debug_alloc_pool;
+		if (prev_offset + dah_overhead + prev->size == h_offset) {
+			prev->size += dah_overhead + h->size;
+			memset(h, POISON_FREE, dah_overhead - 1);
+			*((char *)h + dah_overhead - 1) = POISON_END;
+			h = prev;
+			h_offset = prev_offset;
+		} else {
+			h->next = prev->next;
+			prev->next = h_offset;
+		}
+	}
+	if (h_offset + dah_overhead + h->size == h->next) {
+		struct debug_alloc_header *next;
+		next = (struct debug_alloc_header *)
+			(debug_alloc_pool + h->next);
+		h->size += dah_overhead + next->size;
+		h->next = next->next;
+		memset(next, POISON_FREE, dah_overhead - 1);
+		*((char *)next + dah_overhead - 1) = POISON_END;
+	}
+	spin_unlock(&dap_lock);
+}
+
+void debug_kusage(void)
+{
+	struct debug_alloc_header *h_free, *h_used;
+#ifdef	CONFIG_IA64
+	/* FIXME: using dah for ia64 unwind always results in a memory leak.
+	 * Fix that memory leak first, then set debug_kusage_one_time = 1 for
+	 * all architectures.
+	 */
+	static int debug_kusage_one_time;
+#else
+	static int debug_kusage_one_time = 1;
+#endif
+	if (!get_dap_lock()) {
+		__release(dap_lock);	/* we never actually got it */
+		return;
+	}
+	h_free = (struct debug_alloc_header *)(debug_alloc_pool + dah_first);
+	if (dah_first == 0 &&
+	    (h_free->size == sizeof(debug_alloc_pool_aligned) - dah_overhead ||
+	     dah_first_call))
+		goto out;
+	if (!debug_kusage_one_time)
+		goto out;
+	debug_kusage_one_time = 0;
+	kdb_printf("%s: debug_kmalloc memory leak dah_first %d\n",
+		   __func__, dah_first);
+	if (dah_first) {
+		h_used = (struct debug_alloc_header *)debug_alloc_pool;
+		kdb_printf("%s: h_used %p size %d\n", __func__, h_used,
+			   h_used->size);
+	}
+	do {
+		h_used = (struct debug_alloc_header *)
+			  ((char *)h_free + dah_overhead + h_free->size);
+		kdb_printf("%s: h_used %p size %d caller %p\n",
+			   __func__, h_used, h_used->size, h_used->caller);
+		h_free = (struct debug_alloc_header *)
+			  (debug_alloc_pool + h_free->next);
+	} while (h_free->next);
+	h_used = (struct debug_alloc_header *)
+		  ((char *)h_free + dah_overhead + h_free->size);
+	if ((char *)h_used - debug_alloc_pool !=
+	    sizeof(debug_alloc_pool_aligned))
+		kdb_printf("%s: h_used %p size %d caller %p\n",
+			   __func__, h_used, h_used->size, h_used->caller);
+out:
+	spin_unlock(&dap_lock);
+}
+
+/* Maintain a small stack of kdb_flags to allow recursion without disturbing
+ * the global kdb state.
+ */
+
+static int kdb_flags_stack[4], kdb_flags_index;
+
+void kdb_save_flags(void)
+{
+	BUG_ON(kdb_flags_index >= ARRAY_SIZE(kdb_flags_stack));
+	kdb_flags_stack[kdb_flags_index++] = kdb_flags;
+}
+
+void kdb_restore_flags(void)
+{
+	BUG_ON(kdb_flags_index <= 0);
+	kdb_flags = kdb_flags_stack[--kdb_flags_index];
+}
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 13aff29..6f6d091 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/fs.h>
+#include <linux/kdb.h>
 #include <linux/err.h>
 #include <linux/proc_fs.h>
 #include <linux/sched.h>	/* for cond_resched */
@@ -516,6 +517,26 @@ static int kallsyms_open(struct inode *inode, struct file *file)
 	return ret;
 }
 
+#ifdef	CONFIG_KGDB_KDB
+const char *kdb_walk_kallsyms(loff_t *pos)
+{
+	static struct kallsym_iter kdb_walk_kallsyms_iter;
+	if (*pos == 0) {
+		memset(&kdb_walk_kallsyms_iter, 0,
+		       sizeof(kdb_walk_kallsyms_iter));
+		reset_iter(&kdb_walk_kallsyms_iter, 0);
+	}
+	while (1) {
+		if (!update_iter(&kdb_walk_kallsyms_iter, *pos))
+			return NULL;
+		++*pos;
+		/* Some debugging symbols have no name.  Ignore them. */
+		if (kdb_walk_kallsyms_iter.name[0])
+			return kdb_walk_kallsyms_iter.name;
+	}
+}
+#endif	/* CONFIG_KGDB_KDB */
+
 static const struct file_operations kallsyms_operations = {
 	.open = kallsyms_open,
 	.read = seq_read,
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
deleted file mode 100644
index 11f3515..0000000
--- a/kernel/kgdb.c
+++ /dev/null
@@ -1,1764 +0,0 @@
-/*
- * KGDB stub.
- *
- * Maintainer: Jason Wessel <jason.wessel@windriver.com>
- *
- * Copyright (C) 2000-2001 VERITAS Software Corporation.
- * Copyright (C) 2002-2004 Timesys Corporation
- * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
- * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
- * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
- * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
- * Copyright (C) 2005-2008 Wind River Systems, Inc.
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- *
- * Contributors at various stages not listed above:
- *  Jason Wessel ( jason.wessel@windriver.com )
- *  George Anzinger <george@mvista.com>
- *  Anurekh Saxena (anurekh.saxena@timesys.com)
- *  Lake Stevens Instrument Division (Glenn Engel)
- *  Jim Kingdon, Cygnus Support.
- *
- * Original KGDB stub: David Grothe <dave@gcom.com>,
- * Tigran Aivazian <tigran@sco.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#include <linux/pid_namespace.h>
-#include <linux/clocksource.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/console.h>
-#include <linux/threads.h>
-#include <linux/uaccess.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/reboot.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/sysrq.h>
-#include <linux/init.h>
-#include <linux/kgdb.h>
-#include <linux/pid.h>
-#include <linux/smp.h>
-#include <linux/mm.h>
-
-#include <asm/cacheflush.h>
-#include <asm/byteorder.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-
-static int kgdb_break_asap;
-
-#define KGDB_MAX_THREAD_QUERY 17
-struct kgdb_state {
-	int			ex_vector;
-	int			signo;
-	int			err_code;
-	int			cpu;
-	int			pass_exception;
-	unsigned long		thr_query;
-	unsigned long		threadid;
-	long			kgdb_usethreadid;
-	struct pt_regs		*linux_regs;
-};
-
-/* Exception state values */
-#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
-#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
-#define DCPU_IS_SLAVE    0x4 /* Slave cpu enter exception */
-#define DCPU_SSTEP       0x8 /* CPU is single stepping */
-
-static struct debuggerinfo_struct {
-	void			*debuggerinfo;
-	struct task_struct	*task;
-	int 			exception_state;
-} kgdb_info[NR_CPUS];
-
-/**
- * kgdb_connected - Is a host GDB connected to us?
- */
-int				kgdb_connected;
-EXPORT_SYMBOL_GPL(kgdb_connected);
-
-/* All the KGDB handlers are installed */
-static int			kgdb_io_module_registered;
-
-/* Guard for recursive entry */
-static int			exception_level;
-
-static struct kgdb_io		*kgdb_io_ops;
-static DEFINE_SPINLOCK(kgdb_registration_lock);
-
-/* kgdb console driver is loaded */
-static int kgdb_con_registered;
-/* determine if kgdb console output should be used */
-static int kgdb_use_con;
-
-static int __init opt_kgdb_con(char *str)
-{
-	kgdb_use_con = 1;
-	return 0;
-}
-
-early_param("kgdbcon", opt_kgdb_con);
-
-module_param(kgdb_use_con, int, 0644);
-
-/*
- * Holds information about breakpoints in a kernel. These breakpoints are
- * added and removed by gdb.
- */
-static struct kgdb_bkpt		kgdb_break[KGDB_MAX_BREAKPOINTS] = {
-	[0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED }
-};
-
-/*
- * The CPU# of the active CPU, or -1 if none:
- */
-atomic_t			kgdb_active = ATOMIC_INIT(-1);
-
-/*
- * We use NR_CPUs not PERCPU, in case kgdb is used to debug early
- * bootup code (which might not have percpu set up yet):
- */
-static atomic_t			passive_cpu_wait[NR_CPUS];
-static atomic_t			cpu_in_kgdb[NR_CPUS];
-atomic_t			kgdb_setting_breakpoint;
-
-struct task_struct		*kgdb_usethread;
-struct task_struct		*kgdb_contthread;
-
-int				kgdb_single_step;
-pid_t				kgdb_sstep_pid;
-
-/* Our I/O buffers. */
-static char			remcom_in_buffer[BUFMAX];
-static char			remcom_out_buffer[BUFMAX];
-
-/* Storage for the registers, in GDB format. */
-static unsigned long		gdb_regs[(NUMREGBYTES +
-					sizeof(unsigned long) - 1) /
-					sizeof(unsigned long)];
-
-/* to keep track of the CPU which is doing the single stepping*/
-atomic_t			kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
-
-/*
- * If you are debugging a problem where roundup (the collection of
- * all other CPUs) is a problem [this should be extremely rare],
- * then use the nokgdbroundup option to avoid roundup. In that case
- * the other CPUs might interfere with your debugging context, so
- * use this with care:
- */
-static int kgdb_do_roundup = 1;
-
-static int __init opt_nokgdbroundup(char *str)
-{
-	kgdb_do_roundup = 0;
-
-	return 0;
-}
-
-early_param("nokgdbroundup", opt_nokgdbroundup);
-
-/*
- * Finally, some KGDB code :-)
- */
-
-/*
- * Weak aliases for breakpoint management,
- * can be overriden by architectures when needed:
- */
-int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
-{
-	int err;
-
-	err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE);
-	if (err)
-		return err;
-
-	return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
-				  BREAK_INSTR_SIZE);
-}
-
-int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
-{
-	return probe_kernel_write((char *)addr,
-				  (char *)bundle, BREAK_INSTR_SIZE);
-}
-
-int __weak kgdb_validate_break_address(unsigned long addr)
-{
-	char tmp_variable[BREAK_INSTR_SIZE];
-	int err;
-	/* Validate setting the breakpoint and then removing it.  In the
-	 * remove fails, the kernel needs to emit a bad message because we
-	 * are deep trouble not being able to put things back the way we
-	 * found them.
-	 */
-	err = kgdb_arch_set_breakpoint(addr, tmp_variable);
-	if (err)
-		return err;
-	err = kgdb_arch_remove_breakpoint(addr, tmp_variable);
-	if (err)
-		printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
-		   "memory destroyed at: %lx", addr);
-	return err;
-}
-
-unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
-{
-	return instruction_pointer(regs);
-}
-
-int __weak kgdb_arch_init(void)
-{
-	return 0;
-}
-
-int __weak kgdb_skipexception(int exception, struct pt_regs *regs)
-{
-	return 0;
-}
-
-void __weak
-kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
-{
-	return;
-}
-
-/**
- *	kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
- *	@regs: Current &struct pt_regs.
- *
- *	This function will be called if the particular architecture must
- *	disable hardware debugging while it is processing gdb packets or
- *	handling exception.
- */
-void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
-{
-}
-
-/*
- * GDB remote protocol parser:
- */
-
-static int hex(char ch)
-{
-	if ((ch >= 'a') && (ch <= 'f'))
-		return ch - 'a' + 10;
-	if ((ch >= '0') && (ch <= '9'))
-		return ch - '0';
-	if ((ch >= 'A') && (ch <= 'F'))
-		return ch - 'A' + 10;
-	return -1;
-}
-
-/* scan for the sequence $<data>#<checksum> */
-static void get_packet(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int count;
-	char ch;
-
-	do {
-		/*
-		 * Spin and wait around for the start character, ignore all
-		 * other characters:
-		 */
-		while ((ch = (kgdb_io_ops->read_char())) != '$')
-			/* nothing */;
-
-		kgdb_connected = 1;
-		checksum = 0;
-		xmitcsum = -1;
-
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found:
-		 */
-		while (count < (BUFMAX - 1)) {
-			ch = kgdb_io_ops->read_char();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(kgdb_io_ops->read_char()) << 4;
-			xmitcsum += hex(kgdb_io_ops->read_char());
-
-			if (checksum != xmitcsum)
-				/* failed checksum */
-				kgdb_io_ops->write_char('-');
-			else
-				/* successful transfer */
-				kgdb_io_ops->write_char('+');
-			if (kgdb_io_ops->flush)
-				kgdb_io_ops->flush();
-		}
-	} while (checksum != xmitcsum);
-}
-
-/*
- * Send the packet in buffer.
- * Check for gdb connection if asked for.
- */
-static void put_packet(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-	while (1) {
-		kgdb_io_ops->write_char('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count])) {
-			kgdb_io_ops->write_char(ch);
-			checksum += ch;
-			count++;
-		}
-
-		kgdb_io_ops->write_char('#');
-		kgdb_io_ops->write_char(hex_asc_hi(checksum));
-		kgdb_io_ops->write_char(hex_asc_lo(checksum));
-		if (kgdb_io_ops->flush)
-			kgdb_io_ops->flush();
-
-		/* Now see what we get in reply. */
-		ch = kgdb_io_ops->read_char();
-
-		if (ch == 3)
-			ch = kgdb_io_ops->read_char();
-
-		/* If we get an ACK, we are done. */
-		if (ch == '+')
-			return;
-
-		/*
-		 * If we get the start of another packet, this means
-		 * that GDB is attempting to reconnect.  We will NAK
-		 * the packet being sent, and stop trying to send this
-		 * packet.
-		 */
-		if (ch == '$') {
-			kgdb_io_ops->write_char('-');
-			if (kgdb_io_ops->flush)
-				kgdb_io_ops->flush();
-			return;
-		}
-	}
-}
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null). May return an error.
- */
-int kgdb_mem2hex(char *mem, char *buf, int count)
-{
-	char *tmp;
-	int err;
-
-	/*
-	 * We use the upper half of buf as an intermediate buffer for the
-	 * raw memory copy.  Hex conversion will work against this one.
-	 */
-	tmp = buf + count;
-
-	err = probe_kernel_read(tmp, mem, count);
-	if (!err) {
-		while (count > 0) {
-			buf = pack_hex_byte(buf, *tmp);
-			tmp++;
-			count--;
-		}
-
-		*buf = 0;
-	}
-
-	return err;
-}
-
-/*
- * Copy the binary array pointed to by buf into mem.  Fix $, #, and
- * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
- * The input buf is overwitten with the result to write to mem.
- */
-static int kgdb_ebin2mem(char *buf, char *mem, int count)
-{
-	int size = 0;
-	char *c = buf;
-
-	while (count-- > 0) {
-		c[size] = *buf++;
-		if (c[size] == 0x7d)
-			c[size] = *buf++ ^ 0x20;
-		size++;
-	}
-
-	return probe_kernel_write(mem, c, size);
-}
-
-/*
- * Convert the hex array pointed to by buf into binary to be placed in mem.
- * Return a pointer to the character AFTER the last byte written.
- * May return an error.
- */
-int kgdb_hex2mem(char *buf, char *mem, int count)
-{
-	char *tmp_raw;
-	char *tmp_hex;
-
-	/*
-	 * We use the upper half of buf as an intermediate buffer for the
-	 * raw memory that is converted from hex.
-	 */
-	tmp_raw = buf + count * 2;
-
-	tmp_hex = tmp_raw - 1;
-	while (tmp_hex >= buf) {
-		tmp_raw--;
-		*tmp_raw = hex(*tmp_hex--);
-		*tmp_raw |= hex(*tmp_hex--) << 4;
-	}
-
-	return probe_kernel_write(mem, tmp_raw, count);
-}
-
-/*
- * While we find nice hex chars, build a long_val.
- * Return number of chars processed.
- */
-int kgdb_hex2long(char **ptr, unsigned long *long_val)
-{
-	int hex_val;
-	int num = 0;
-	int negate = 0;
-
-	*long_val = 0;
-
-	if (**ptr == '-') {
-		negate = 1;
-		(*ptr)++;
-	}
-	while (**ptr) {
-		hex_val = hex(**ptr);
-		if (hex_val < 0)
-			break;
-
-		*long_val = (*long_val << 4) | hex_val;
-		num++;
-		(*ptr)++;
-	}
-
-	if (negate)
-		*long_val = -*long_val;
-
-	return num;
-}
-
-/* Write memory due to an 'M' or 'X' packet. */
-static int write_mem_msg(int binary)
-{
-	char *ptr = &remcom_in_buffer[1];
-	unsigned long addr;
-	unsigned long length;
-	int err;
-
-	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
-	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
-		if (binary)
-			err = kgdb_ebin2mem(ptr, (char *)addr, length);
-		else
-			err = kgdb_hex2mem(ptr, (char *)addr, length);
-		if (err)
-			return err;
-		if (CACHE_FLUSH_IS_SAFE)
-			flush_icache_range(addr, addr + length);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static void error_packet(char *pkt, int error)
-{
-	error = -error;
-	pkt[0] = 'E';
-	pkt[1] = hex_asc[(error / 10)];
-	pkt[2] = hex_asc[(error % 10)];
-	pkt[3] = '\0';
-}
-
-/*
- * Thread ID accessors. We represent a flat TID space to GDB, where
- * the per CPU idle threads (which under Linux all have PID 0) are
- * remapped to negative TIDs.
- */
-
-#define BUF_THREAD_ID_SIZE	16
-
-static char *pack_threadid(char *pkt, unsigned char *id)
-{
-	char *limit;
-
-	limit = pkt + BUF_THREAD_ID_SIZE;
-	while (pkt < limit)
-		pkt = pack_hex_byte(pkt, *id++);
-
-	return pkt;
-}
-
-static void int_to_threadref(unsigned char *id, int value)
-{
-	unsigned char *scan;
-	int i = 4;
-
-	scan = (unsigned char *)id;
-	while (i--)
-		*scan++ = 0;
-	put_unaligned_be32(value, scan);
-}
-
-static struct task_struct *getthread(struct pt_regs *regs, int tid)
-{
-	/*
-	 * Non-positive TIDs are remapped to the cpu shadow information
-	 */
-	if (tid == 0 || tid == -1)
-		tid = -atomic_read(&kgdb_active) - 2;
-	if (tid < -1 && tid > -NR_CPUS - 2) {
-		if (kgdb_info[-tid - 2].task)
-			return kgdb_info[-tid - 2].task;
-		else
-			return idle_task(-tid - 2);
-	}
-	if (tid <= 0) {
-		printk(KERN_ERR "KGDB: Internal thread select error\n");
-		dump_stack();
-		return NULL;
-	}
-
-	/*
-	 * find_task_by_pid_ns() does not take the tasklist lock anymore
-	 * but is nicely RCU locked - hence is a pretty resilient
-	 * thing to use:
-	 */
-	return find_task_by_pid_ns(tid, &init_pid_ns);
-}
-
-/*
- * Some architectures need cache flushes when we set/clear a
- * breakpoint:
- */
-static void kgdb_flush_swbreak_addr(unsigned long addr)
-{
-	if (!CACHE_FLUSH_IS_SAFE)
-		return;
-
-	if (current->mm && current->mm->mmap_cache) {
-		flush_cache_range(current->mm->mmap_cache,
-				  addr, addr + BREAK_INSTR_SIZE);
-	}
-	/* Force flush instruction cache if it was outside the mm */
-	flush_icache_range(addr, addr + BREAK_INSTR_SIZE);
-}
-
-/*
- * SW breakpoint management:
- */
-static int kgdb_activate_sw_breakpoints(void)
-{
-	unsigned long addr;
-	int error;
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if (kgdb_break[i].state != BP_SET)
-			continue;
-
-		addr = kgdb_break[i].bpt_addr;
-		error = kgdb_arch_set_breakpoint(addr,
-				kgdb_break[i].saved_instr);
-		if (error) {
-			ret = error;
-			printk(KERN_INFO "KGDB: BP install failed: %lx", addr);
-			continue;
-		}
-
-		kgdb_flush_swbreak_addr(addr);
-		kgdb_break[i].state = BP_ACTIVE;
-	}
-	return ret;
-}
-
-static int kgdb_set_sw_break(unsigned long addr)
-{
-	int err = kgdb_validate_break_address(addr);
-	int breakno = -1;
-	int i;
-
-	if (err)
-		return err;
-
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if ((kgdb_break[i].state == BP_SET) &&
-					(kgdb_break[i].bpt_addr == addr))
-			return -EEXIST;
-	}
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if (kgdb_break[i].state == BP_REMOVED &&
-					kgdb_break[i].bpt_addr == addr) {
-			breakno = i;
-			break;
-		}
-	}
-
-	if (breakno == -1) {
-		for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-			if (kgdb_break[i].state == BP_UNDEFINED) {
-				breakno = i;
-				break;
-			}
-		}
-	}
-
-	if (breakno == -1)
-		return -E2BIG;
-
-	kgdb_break[breakno].state = BP_SET;
-	kgdb_break[breakno].type = BP_BREAKPOINT;
-	kgdb_break[breakno].bpt_addr = addr;
-
-	return 0;
-}
-
-static int kgdb_deactivate_sw_breakpoints(void)
-{
-	unsigned long addr;
-	int error;
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if (kgdb_break[i].state != BP_ACTIVE)
-			continue;
-		addr = kgdb_break[i].bpt_addr;
-		error = kgdb_arch_remove_breakpoint(addr,
-					kgdb_break[i].saved_instr);
-		if (error) {
-			printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr);
-			ret = error;
-		}
-
-		kgdb_flush_swbreak_addr(addr);
-		kgdb_break[i].state = BP_SET;
-	}
-	return ret;
-}
-
-static int kgdb_remove_sw_break(unsigned long addr)
-{
-	int i;
-
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if ((kgdb_break[i].state == BP_SET) &&
-				(kgdb_break[i].bpt_addr == addr)) {
-			kgdb_break[i].state = BP_REMOVED;
-			return 0;
-		}
-	}
-	return -ENOENT;
-}
-
-int kgdb_isremovedbreak(unsigned long addr)
-{
-	int i;
-
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if ((kgdb_break[i].state == BP_REMOVED) &&
-					(kgdb_break[i].bpt_addr == addr))
-			return 1;
-	}
-	return 0;
-}
-
-static int remove_all_break(void)
-{
-	unsigned long addr;
-	int error;
-	int i;
-
-	/* Clear memory breakpoints. */
-	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
-		if (kgdb_break[i].state != BP_ACTIVE)
-			goto setundefined;
-		addr = kgdb_break[i].bpt_addr;
-		error = kgdb_arch_remove_breakpoint(addr,
-				kgdb_break[i].saved_instr);
-		if (error)
-			printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
-			   addr);
-setundefined:
-		kgdb_break[i].state = BP_UNDEFINED;
-	}
-
-	/* Clear hardware breakpoints. */
-	if (arch_kgdb_ops.remove_all_hw_break)
-		arch_kgdb_ops.remove_all_hw_break();
-
-	return 0;
-}
-
-/*
- * Remap normal tasks to their real PID,
- * CPU shadow threads are mapped to -CPU - 2
- */
-static inline int shadow_pid(int realpid)
-{
-	if (realpid)
-		return realpid;
-
-	return -raw_smp_processor_id() - 2;
-}
-
-static char gdbmsgbuf[BUFMAX + 1];
-
-static void kgdb_msg_write(const char *s, int len)
-{
-	char *bufptr;
-	int wcount;
-	int i;
-
-	/* 'O'utput */
-	gdbmsgbuf[0] = 'O';
-
-	/* Fill and send buffers... */
-	while (len > 0) {
-		bufptr = gdbmsgbuf + 1;
-
-		/* Calculate how many this time */
-		if ((len << 1) > (BUFMAX - 2))
-			wcount = (BUFMAX - 2) >> 1;
-		else
-			wcount = len;
-
-		/* Pack in hex chars */
-		for (i = 0; i < wcount; i++)
-			bufptr = pack_hex_byte(bufptr, s[i]);
-		*bufptr = '\0';
-
-		/* Move up */
-		s += wcount;
-		len -= wcount;
-
-		/* Write packet */
-		put_packet(gdbmsgbuf);
-	}
-}
-
-/*
- * Return true if there is a valid kgdb I/O module.  Also if no
- * debugger is attached a message can be printed to the console about
- * waiting for the debugger to attach.
- *
- * The print_wait argument is only to be true when called from inside
- * the core kgdb_handle_exception, because it will wait for the
- * debugger to attach.
- */
-static int kgdb_io_ready(int print_wait)
-{
-	if (!kgdb_io_ops)
-		return 0;
-	if (kgdb_connected)
-		return 1;
-	if (atomic_read(&kgdb_setting_breakpoint))
-		return 1;
-	if (print_wait)
-		printk(KERN_CRIT "KGDB: Waiting for remote debugger\n");
-	return 1;
-}
-
-/*
- * All the functions that start with gdb_cmd are the various
- * operations to implement the handlers for the gdbserial protocol
- * where KGDB is communicating with an external debugger
- */
-
-/* Handle the '?' status packets */
-static void gdb_cmd_status(struct kgdb_state *ks)
-{
-	/*
-	 * We know that this packet is only sent
-	 * during initial connect.  So to be safe,
-	 * we clear out our breakpoints now in case
-	 * GDB is reconnecting.
-	 */
-	remove_all_break();
-
-	remcom_out_buffer[0] = 'S';
-	pack_hex_byte(&remcom_out_buffer[1], ks->signo);
-}
-
-/* Handle the 'g' get registers request */
-static void gdb_cmd_getregs(struct kgdb_state *ks)
-{
-	struct task_struct *thread;
-	void *local_debuggerinfo;
-	int i;
-
-	thread = kgdb_usethread;
-	if (!thread) {
-		thread = kgdb_info[ks->cpu].task;
-		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
-	} else {
-		local_debuggerinfo = NULL;
-		for_each_online_cpu(i) {
-			/*
-			 * Try to find the task on some other
-			 * or possibly this node if we do not
-			 * find the matching task then we try
-			 * to approximate the results.
-			 */
-			if (thread == kgdb_info[i].task)
-				local_debuggerinfo = kgdb_info[i].debuggerinfo;
-		}
-	}
-
-	/*
-	 * All threads that don't have debuggerinfo should be
-	 * in schedule() sleeping, since all other CPUs
-	 * are in kgdb_wait, and thus have debuggerinfo.
-	 */
-	if (local_debuggerinfo) {
-		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
-	} else {
-		/*
-		 * Pull stuff saved during switch_to; nothing
-		 * else is accessible (or even particularly
-		 * relevant).
-		 *
-		 * This should be enough for a stack trace.
-		 */
-		sleeping_thread_to_gdb_regs(gdb_regs, thread);
-	}
-	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
-}
-
-/* Handle the 'G' set registers request */
-static void gdb_cmd_setregs(struct kgdb_state *ks)
-{
-	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
-
-	if (kgdb_usethread && kgdb_usethread != current) {
-		error_packet(remcom_out_buffer, -EINVAL);
-	} else {
-		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
-		strcpy(remcom_out_buffer, "OK");
-	}
-}
-
-/* Handle the 'm' memory read bytes */
-static void gdb_cmd_memread(struct kgdb_state *ks)
-{
-	char *ptr = &remcom_in_buffer[1];
-	unsigned long length;
-	unsigned long addr;
-	int err;
-
-	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
-					kgdb_hex2long(&ptr, &length) > 0) {
-		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
-		if (err)
-			error_packet(remcom_out_buffer, err);
-	} else {
-		error_packet(remcom_out_buffer, -EINVAL);
-	}
-}
-
-/* Handle the 'M' memory write bytes */
-static void gdb_cmd_memwrite(struct kgdb_state *ks)
-{
-	int err = write_mem_msg(0);
-
-	if (err)
-		error_packet(remcom_out_buffer, err);
-	else
-		strcpy(remcom_out_buffer, "OK");
-}
-
-/* Handle the 'X' memory binary write bytes */
-static void gdb_cmd_binwrite(struct kgdb_state *ks)
-{
-	int err = write_mem_msg(1);
-
-	if (err)
-		error_packet(remcom_out_buffer, err);
-	else
-		strcpy(remcom_out_buffer, "OK");
-}
-
-/* Handle the 'D' or 'k', detach or kill packets */
-static void gdb_cmd_detachkill(struct kgdb_state *ks)
-{
-	int error;
-
-	/* The detach case */
-	if (remcom_in_buffer[0] == 'D') {
-		error = remove_all_break();
-		if (error < 0) {
-			error_packet(remcom_out_buffer, error);
-		} else {
-			strcpy(remcom_out_buffer, "OK");
-			kgdb_connected = 0;
-		}
-		put_packet(remcom_out_buffer);
-	} else {
-		/*
-		 * Assume the kill case, with no exit code checking,
-		 * trying to force detach the debugger:
-		 */
-		remove_all_break();
-		kgdb_connected = 0;
-	}
-}
-
-/* Handle the 'R' reboot packets */
-static int gdb_cmd_reboot(struct kgdb_state *ks)
-{
-	/* For now, only honor R0 */
-	if (strcmp(remcom_in_buffer, "R0") == 0) {
-		printk(KERN_CRIT "Executing emergency reboot\n");
-		strcpy(remcom_out_buffer, "OK");
-		put_packet(remcom_out_buffer);
-
-		/*
-		 * Execution should not return from
-		 * machine_emergency_restart()
-		 */
-		machine_emergency_restart();
-		kgdb_connected = 0;
-
-		return 1;
-	}
-	return 0;
-}
-
-/* Handle the 'q' query packets */
-static void gdb_cmd_query(struct kgdb_state *ks)
-{
-	struct task_struct *g;
-	struct task_struct *p;
-	unsigned char thref[8];
-	char *ptr;
-	int i;
-	int cpu;
-	int finished = 0;
-
-	switch (remcom_in_buffer[1]) {
-	case 's':
-	case 'f':
-		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-
-		i = 0;
-		remcom_out_buffer[0] = 'm';
-		ptr = remcom_out_buffer + 1;
-		if (remcom_in_buffer[1] == 'f') {
-			/* Each cpu is a shadow thread */
-			for_each_online_cpu(cpu) {
-				ks->thr_query = 0;
-				int_to_threadref(thref, -cpu - 2);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
-				*(ptr++) = ',';
-				i++;
-			}
-		}
-
-		do_each_thread(g, p) {
-			if (i >= ks->thr_query && !finished) {
-				int_to_threadref(thref, p->pid);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
-				*(ptr++) = ',';
-				ks->thr_query++;
-				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
-					finished = 1;
-			}
-			i++;
-		} while_each_thread(g, p);
-
-		*(--ptr) = '\0';
-		break;
-
-	case 'C':
-		/* Current thread id */
-		strcpy(remcom_out_buffer, "QC");
-		ks->threadid = shadow_pid(current->pid);
-		int_to_threadref(thref, ks->threadid);
-		pack_threadid(remcom_out_buffer + 2, thref);
-		break;
-	case 'T':
-		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		ks->threadid = 0;
-		ptr = remcom_in_buffer + 17;
-		kgdb_hex2long(&ptr, &ks->threadid);
-		if (!getthread(ks->linux_regs, ks->threadid)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		if ((int)ks->threadid > 0) {
-			kgdb_mem2hex(getthread(ks->linux_regs,
-					ks->threadid)->comm,
-					remcom_out_buffer, 16);
-		} else {
-			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
-
-			sprintf(tmpstr, "shadowCPU%d",
-					(int)(-ks->threadid - 2));
-			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
-		}
-		break;
-	}
-}
-
-/* Handle the 'H' task query packets */
-static void gdb_cmd_task(struct kgdb_state *ks)
-{
-	struct task_struct *thread;
-	char *ptr;
-
-	switch (remcom_in_buffer[1]) {
-	case 'g':
-		ptr = &remcom_in_buffer[2];
-		kgdb_hex2long(&ptr, &ks->threadid);
-		thread = getthread(ks->linux_regs, ks->threadid);
-		if (!thread && ks->threadid > 0) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		kgdb_usethread = thread;
-		ks->kgdb_usethreadid = ks->threadid;
-		strcpy(remcom_out_buffer, "OK");
-		break;
-	case 'c':
-		ptr = &remcom_in_buffer[2];
-		kgdb_hex2long(&ptr, &ks->threadid);
-		if (!ks->threadid) {
-			kgdb_contthread = NULL;
-		} else {
-			thread = getthread(ks->linux_regs, ks->threadid);
-			if (!thread && ks->threadid > 0) {
-				error_packet(remcom_out_buffer, -EINVAL);
-				break;
-			}
-			kgdb_contthread = thread;
-		}
-		strcpy(remcom_out_buffer, "OK");
-		break;
-	}
-}
-
-/* Handle the 'T' thread query packets */
-static void gdb_cmd_thread(struct kgdb_state *ks)
-{
-	char *ptr = &remcom_in_buffer[1];
-	struct task_struct *thread;
-
-	kgdb_hex2long(&ptr, &ks->threadid);
-	thread = getthread(ks->linux_regs, ks->threadid);
-	if (thread)
-		strcpy(remcom_out_buffer, "OK");
-	else
-		error_packet(remcom_out_buffer, -EINVAL);
-}
-
-/* Handle the 'z' or 'Z' breakpoint remove or set packets */
-static void gdb_cmd_break(struct kgdb_state *ks)
-{
-	/*
-	 * Since GDB-5.3, it's been drafted that '0' is a software
-	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
-	 */
-	char *bpt_type = &remcom_in_buffer[1];
-	char *ptr = &remcom_in_buffer[2];
-	unsigned long addr;
-	unsigned long length;
-	int error = 0;
-
-	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
-		/* Unsupported */
-		if (*bpt_type > '4')
-			return;
-	} else {
-		if (*bpt_type != '0' && *bpt_type != '1')
-			/* Unsupported. */
-			return;
-	}
-
-	/*
-	 * Test if this is a hardware breakpoint, and
-	 * if we support it:
-	 */
-	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
-		/* Unsupported. */
-		return;
-
-	if (*(ptr++) != ',') {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-	if (!kgdb_hex2long(&ptr, &addr)) {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-	if (*(ptr++) != ',' ||
-		!kgdb_hex2long(&ptr, &length)) {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-
-	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
-		error = kgdb_set_sw_break(addr);
-	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
-		error = kgdb_remove_sw_break(addr);
-	else if (remcom_in_buffer[0] == 'Z')
-		error = arch_kgdb_ops.set_hw_breakpoint(addr,
-			(int)length, *bpt_type - '0');
-	else if (remcom_in_buffer[0] == 'z')
-		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
-			(int) length, *bpt_type - '0');
-
-	if (error == 0)
-		strcpy(remcom_out_buffer, "OK");
-	else
-		error_packet(remcom_out_buffer, error);
-}
-
-/* Handle the 'C' signal / exception passing packets */
-static int gdb_cmd_exception_pass(struct kgdb_state *ks)
-{
-	/* C09 == pass exception
-	 * C15 == detach kgdb, pass exception
-	 */
-	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
-
-		ks->pass_exception = 1;
-		remcom_in_buffer[0] = 'c';
-
-	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
-
-		ks->pass_exception = 1;
-		remcom_in_buffer[0] = 'D';
-		remove_all_break();
-		kgdb_connected = 0;
-		return 1;
-
-	} else {
-		kgdb_msg_write("KGDB only knows signal 9 (pass)"
-			" and 15 (pass and disconnect)\n"
-			"Executing a continue without signal passing\n", 0);
-		remcom_in_buffer[0] = 'c';
-	}
-
-	/* Indicate fall through */
-	return -1;
-}
-
-/*
- * This function performs all gdbserial command procesing
- */
-static int gdb_serial_stub(struct kgdb_state *ks)
-{
-	int error = 0;
-	int tmp;
-
-	/* Clear the out buffer. */
-	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
-
-	if (kgdb_connected) {
-		unsigned char thref[8];
-		char *ptr;
-
-		/* Reply to host that an exception has occurred */
-		ptr = remcom_out_buffer;
-		*ptr++ = 'T';
-		ptr = pack_hex_byte(ptr, ks->signo);
-		ptr += strlen(strcpy(ptr, "thread:"));
-		int_to_threadref(thref, shadow_pid(current->pid));
-		ptr = pack_threadid(ptr, thref);
-		*ptr++ = ';';
-		put_packet(remcom_out_buffer);
-	}
-
-	kgdb_usethread = kgdb_info[ks->cpu].task;
-	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
-	ks->pass_exception = 0;
-
-	while (1) {
-		error = 0;
-
-		/* Clear the out buffer. */
-		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
-
-		get_packet(remcom_in_buffer);
-
-		switch (remcom_in_buffer[0]) {
-		case '?': /* gdbserial status */
-			gdb_cmd_status(ks);
-			break;
-		case 'g': /* return the value of the CPU registers */
-			gdb_cmd_getregs(ks);
-			break;
-		case 'G': /* set the value of the CPU registers - return OK */
-			gdb_cmd_setregs(ks);
-			break;
-		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-			gdb_cmd_memread(ks);
-			break;
-		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
-			gdb_cmd_memwrite(ks);
-			break;
-		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
-			gdb_cmd_binwrite(ks);
-			break;
-			/* kill or detach. KGDB should treat this like a
-			 * continue.
-			 */
-		case 'D': /* Debugger detach */
-		case 'k': /* Debugger detach via kill */
-			gdb_cmd_detachkill(ks);
-			goto default_handle;
-		case 'R': /* Reboot */
-			if (gdb_cmd_reboot(ks))
-				goto default_handle;
-			break;
-		case 'q': /* query command */
-			gdb_cmd_query(ks);
-			break;
-		case 'H': /* task related */
-			gdb_cmd_task(ks);
-			break;
-		case 'T': /* Query thread status */
-			gdb_cmd_thread(ks);
-			break;
-		case 'z': /* Break point remove */
-		case 'Z': /* Break point set */
-			gdb_cmd_break(ks);
-			break;
-		case 'C': /* Exception passing */
-			tmp = gdb_cmd_exception_pass(ks);
-			if (tmp > 0)
-				goto default_handle;
-			if (tmp == 0)
-				break;
-			/* Fall through on tmp < 0 */
-		case 'c': /* Continue packet */
-		case 's': /* Single step packet */
-			if (kgdb_contthread && kgdb_contthread != current) {
-				/* Can't switch threads in kgdb */
-				error_packet(remcom_out_buffer, -EINVAL);
-				break;
-			}
-			kgdb_activate_sw_breakpoints();
-			/* Fall through to default processing */
-		default:
-default_handle:
-			error = kgdb_arch_handle_exception(ks->ex_vector,
-						ks->signo,
-						ks->err_code,
-						remcom_in_buffer,
-						remcom_out_buffer,
-						ks->linux_regs);
-			/*
-			 * Leave cmd processing on error, detach,
-			 * kill, continue, or single step.
-			 */
-			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
-			    remcom_in_buffer[0] == 'k') {
-				error = 0;
-				goto kgdb_exit;
-			}
-
-		}
-
-		/* reply to the request */
-		put_packet(remcom_out_buffer);
-	}
-
-kgdb_exit:
-	if (ks->pass_exception)
-		error = 1;
-	return error;
-}
-
-static int kgdb_reenter_check(struct kgdb_state *ks)
-{
-	unsigned long addr;
-
-	if (atomic_read(&kgdb_active) != raw_smp_processor_id())
-		return 0;
-
-	/* Panic on recursive debugger calls: */
-	exception_level++;
-	addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs);
-	kgdb_deactivate_sw_breakpoints();
-
-	/*
-	 * If the break point removed ok at the place exception
-	 * occurred, try to recover and print a warning to the end
-	 * user because the user planted a breakpoint in a place that
-	 * KGDB needs in order to function.
-	 */
-	if (kgdb_remove_sw_break(addr) == 0) {
-		exception_level = 0;
-		kgdb_skipexception(ks->ex_vector, ks->linux_regs);
-		kgdb_activate_sw_breakpoints();
-		printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
-			addr);
-		WARN_ON_ONCE(1);
-
-		return 1;
-	}
-	remove_all_break();
-	kgdb_skipexception(ks->ex_vector, ks->linux_regs);
-
-	if (exception_level > 1) {
-		dump_stack();
-		panic("Recursive entry to debugger");
-	}
-
-	printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n");
-	dump_stack();
-	panic("Recursive entry to debugger");
-
-	return 1;
-}
-
-static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs)
-{
-	unsigned long flags;
-	int sstep_tries = 100;
-	int error = 0;
-	int i, cpu;
-	int trace_on = 0;
-acquirelock:
-	/*
-	 * Interrupts will be restored by the 'trap return' code, except when
-	 * single stepping.
-	 */
-	local_irq_save(flags);
-
-	cpu = ks->cpu;
-	kgdb_info[cpu].debuggerinfo = regs;
-	kgdb_info[cpu].task = current;
-	/*
-	 * Make sure the above info reaches the primary CPU before
-	 * our cpu_in_kgdb[] flag setting does:
-	 */
-	atomic_inc(&cpu_in_kgdb[cpu]);
-
-	/*
-	 * CPU will loop if it is a slave or request to become a kgdb
-	 * master cpu and acquire the kgdb_active lock:
-	 */
-	while (1) {
-		if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) {
-			if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu)
-				break;
-		} else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) {
-			if (!atomic_read(&passive_cpu_wait[cpu]))
-				goto return_normal;
-		} else {
-return_normal:
-			/* Return to normal operation by executing any
-			 * hw breakpoint fixup.
-			 */
-			if (arch_kgdb_ops.correct_hw_break)
-				arch_kgdb_ops.correct_hw_break();
-			if (trace_on)
-				tracing_on();
-			atomic_dec(&cpu_in_kgdb[cpu]);
-			touch_softlockup_watchdog_sync();
-			clocksource_touch_watchdog();
-			local_irq_restore(flags);
-			return 0;
-		}
-		cpu_relax();
-	}
-
-	/*
-	 * For single stepping, try to only enter on the processor
-	 * that was single stepping.  To gaurd against a deadlock, the
-	 * kernel will only try for the value of sstep_tries before
-	 * giving up and continuing on.
-	 */
-	if (atomic_read(&kgdb_cpu_doing_single_step) != -1 &&
-	    (kgdb_info[cpu].task &&
-	     kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) {
-		atomic_set(&kgdb_active, -1);
-		touch_softlockup_watchdog_sync();
-		clocksource_touch_watchdog();
-		local_irq_restore(flags);
-
-		goto acquirelock;
-	}
-
-	if (!kgdb_io_ready(1)) {
-		error = 1;
-		goto kgdb_restore; /* No I/O connection, so resume the system */
-	}
-
-	/*
-	 * Don't enter if we have hit a removed breakpoint.
-	 */
-	if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
-		goto kgdb_restore;
-
-	/* Call the I/O driver's pre_exception routine */
-	if (kgdb_io_ops->pre_exception)
-		kgdb_io_ops->pre_exception();
-
-	kgdb_disable_hw_debug(ks->linux_regs);
-
-	/*
-	 * Get the passive CPU lock which will hold all the non-primary
-	 * CPU in a spin state while the debugger is active
-	 */
-	if (!kgdb_single_step) {
-		for (i = 0; i < NR_CPUS; i++)
-			atomic_inc(&passive_cpu_wait[i]);
-	}
-
-#ifdef CONFIG_SMP
-	/* Signal the other CPUs to enter kgdb_wait() */
-	if ((!kgdb_single_step) && kgdb_do_roundup)
-		kgdb_roundup_cpus(flags);
-#endif
-
-	/*
-	 * Wait for the other CPUs to be notified and be waiting for us:
-	 */
-	for_each_online_cpu(i) {
-		while (!atomic_read(&cpu_in_kgdb[i]))
-			cpu_relax();
-	}
-
-	/*
-	 * At this point the primary processor is completely
-	 * in the debugger and all secondary CPUs are quiescent
-	 */
-	kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
-	kgdb_deactivate_sw_breakpoints();
-	kgdb_single_step = 0;
-	kgdb_contthread = current;
-	exception_level = 0;
-	trace_on = tracing_is_on();
-	if (trace_on)
-		tracing_off();
-
-	/* Talk to debugger with gdbserial protocol */
-	error = gdb_serial_stub(ks);
-
-	/* Call the I/O driver's post_exception routine */
-	if (kgdb_io_ops->post_exception)
-		kgdb_io_ops->post_exception();
-
-	atomic_dec(&cpu_in_kgdb[ks->cpu]);
-
-	if (!kgdb_single_step) {
-		for (i = NR_CPUS-1; i >= 0; i--)
-			atomic_dec(&passive_cpu_wait[i]);
-		/*
-		 * Wait till all the CPUs have quit
-		 * from the debugger.
-		 */
-		for_each_online_cpu(i) {
-			while (atomic_read(&cpu_in_kgdb[i]))
-				cpu_relax();
-		}
-	}
-
-kgdb_restore:
-	if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
-		int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step);
-		if (kgdb_info[sstep_cpu].task)
-			kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid;
-		else
-			kgdb_sstep_pid = 0;
-	}
-	if (trace_on)
-		tracing_on();
-	/* Free kgdb_active */
-	atomic_set(&kgdb_active, -1);
-	touch_softlockup_watchdog_sync();
-	clocksource_touch_watchdog();
-	local_irq_restore(flags);
-
-	return error;
-}
-
-/*
- * kgdb_handle_exception() - main entry point from a kernel exception
- *
- * Locking hierarchy:
- *	interface locks, if any (begin_session)
- *	kgdb lock (kgdb_active)
- */
-int
-kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
-{
-	struct kgdb_state kgdb_var;
-	struct kgdb_state *ks = &kgdb_var;
-	int ret;
-
-	ks->cpu			= raw_smp_processor_id();
-	ks->ex_vector		= evector;
-	ks->signo		= signo;
-	ks->ex_vector		= evector;
-	ks->err_code		= ecode;
-	ks->kgdb_usethreadid	= 0;
-	ks->linux_regs		= regs;
-
-	if (kgdb_reenter_check(ks))
-		return 0; /* Ouch, double exception ! */
-	kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER;
-	ret = kgdb_cpu_enter(ks, regs);
-	kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER;
-	return ret;
-}
-
-int kgdb_nmicallback(int cpu, void *regs)
-{
-#ifdef CONFIG_SMP
-	struct kgdb_state kgdb_var;
-	struct kgdb_state *ks = &kgdb_var;
-
-	memset(ks, 0, sizeof(struct kgdb_state));
-	ks->cpu			= cpu;
-	ks->linux_regs		= regs;
-
-	if (!atomic_read(&cpu_in_kgdb[cpu]) &&
-	    atomic_read(&kgdb_active) != -1 &&
-	    atomic_read(&kgdb_active) != cpu) {
-		kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE;
-		kgdb_cpu_enter(ks, regs);
-		kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE;
-		return 0;
-	}
-#endif
-	return 1;
-}
-
-static void kgdb_console_write(struct console *co, const char *s,
-   unsigned count)
-{
-	unsigned long flags;
-
-	/* If we're debugging, or KGDB has not connected, don't try
-	 * and print. */
-	if (!kgdb_connected || atomic_read(&kgdb_active) != -1)
-		return;
-
-	local_irq_save(flags);
-	kgdb_msg_write(s, count);
-	local_irq_restore(flags);
-}
-
-static struct console kgdbcons = {
-	.name		= "kgdb",
-	.write		= kgdb_console_write,
-	.flags		= CON_PRINTBUFFER | CON_ENABLED,
-	.index		= -1,
-};
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_gdb(int key, struct tty_struct *tty)
-{
-	if (!kgdb_io_ops) {
-		printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
-		return;
-	}
-	if (!kgdb_connected)
-		printk(KERN_CRIT "Entering KGDB\n");
-
-	kgdb_breakpoint();
-}
-
-static struct sysrq_key_op sysrq_gdb_op = {
-	.handler	= sysrq_handle_gdb,
-	.help_msg	= "debug(G)",
-	.action_msg	= "DEBUG",
-};
-#endif
-
-static void kgdb_register_callbacks(void)
-{
-	if (!kgdb_io_module_registered) {
-		kgdb_io_module_registered = 1;
-		kgdb_arch_init();
-#ifdef CONFIG_MAGIC_SYSRQ
-		register_sysrq_key('g', &sysrq_gdb_op);
-#endif
-		if (kgdb_use_con && !kgdb_con_registered) {
-			register_console(&kgdbcons);
-			kgdb_con_registered = 1;
-		}
-	}
-}
-
-static void kgdb_unregister_callbacks(void)
-{
-	/*
-	 * When this routine is called KGDB should unregister from the
-	 * panic handler and clean up, making sure it is not handling any
-	 * break exceptions at the time.
-	 */
-	if (kgdb_io_module_registered) {
-		kgdb_io_module_registered = 0;
-		kgdb_arch_exit();
-#ifdef CONFIG_MAGIC_SYSRQ
-		unregister_sysrq_key('g', &sysrq_gdb_op);
-#endif
-		if (kgdb_con_registered) {
-			unregister_console(&kgdbcons);
-			kgdb_con_registered = 0;
-		}
-	}
-}
-
-static void kgdb_initial_breakpoint(void)
-{
-	kgdb_break_asap = 0;
-
-	printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n");
-	kgdb_breakpoint();
-}
-
-/**
- *	kgdb_register_io_module - register KGDB IO module
- *	@new_kgdb_io_ops: the io ops vector
- *
- *	Register it with the KGDB core.
- */
-int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops)
-{
-	int err;
-
-	spin_lock(&kgdb_registration_lock);
-
-	if (kgdb_io_ops) {
-		spin_unlock(&kgdb_registration_lock);
-
-		printk(KERN_ERR "kgdb: Another I/O driver is already "
-				"registered with KGDB.\n");
-		return -EBUSY;
-	}
-
-	if (new_kgdb_io_ops->init) {
-		err = new_kgdb_io_ops->init();
-		if (err) {
-			spin_unlock(&kgdb_registration_lock);
-			return err;
-		}
-	}
-
-	kgdb_io_ops = new_kgdb_io_ops;
-
-	spin_unlock(&kgdb_registration_lock);
-
-	printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
-	       new_kgdb_io_ops->name);
-
-	/* Arm KGDB now. */
-	kgdb_register_callbacks();
-
-	if (kgdb_break_asap)
-		kgdb_initial_breakpoint();
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(kgdb_register_io_module);
-
-/**
- *	kkgdb_unregister_io_module - unregister KGDB IO module
- *	@old_kgdb_io_ops: the io ops vector
- *
- *	Unregister it with the KGDB core.
- */
-void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops)
-{
-	BUG_ON(kgdb_connected);
-
-	/*
-	 * KGDB is no longer able to communicate out, so
-	 * unregister our callbacks and reset state.
-	 */
-	kgdb_unregister_callbacks();
-
-	spin_lock(&kgdb_registration_lock);
-
-	WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops);
-	kgdb_io_ops = NULL;
-
-	spin_unlock(&kgdb_registration_lock);
-
-	printk(KERN_INFO
-		"kgdb: Unregistered I/O driver %s, debugger disabled.\n",
-		old_kgdb_io_ops->name);
-}
-EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
-
-/**
- * kgdb_breakpoint - generate breakpoint exception
- *
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void kgdb_breakpoint(void)
-{
-	atomic_inc(&kgdb_setting_breakpoint);
-	wmb(); /* Sync point before breakpoint */
-	arch_kgdb_breakpoint();
-	wmb(); /* Sync point after breakpoint */
-	atomic_dec(&kgdb_setting_breakpoint);
-}
-EXPORT_SYMBOL_GPL(kgdb_breakpoint);
-
-static int __init opt_kgdb_wait(char *str)
-{
-	kgdb_break_asap = 1;
-
-	if (kgdb_io_module_registered)
-		kgdb_initial_breakpoint();
-
-	return 0;
-}
-
-early_param("kgdbwait", opt_kgdb_wait);
diff --git a/kernel/module.c b/kernel/module.c
index 5e14483..3c4fc4b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -77,6 +77,10 @@
 DEFINE_MUTEX(module_mutex);
 EXPORT_SYMBOL_GPL(module_mutex);
 static LIST_HEAD(modules);
+#ifdef CONFIG_KGDB_KDB
+struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+#endif /* CONFIG_KGDB_KDB */
+
 
 /* Block module loading/unloading? */
 int modules_disabled = 0;
diff --git a/kernel/printk.c b/kernel/printk.c
index 75077ad..444b770 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -33,6 +33,7 @@
 #include <linux/bootmem.h>
 #include <linux/syscalls.h>
 #include <linux/kexec.h>
+#include <linux/kdb.h>
 #include <linux/ratelimit.h>
 #include <linux/kmsg_dump.h>
 #include <linux/syslog.h>
@@ -413,6 +414,22 @@ SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 	return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
 }
 
+#ifdef	CONFIG_KGDB_KDB
+/* kdb dmesg command needs access to the syslog buffer.  do_syslog()
+ * uses locks so it cannot be used during debugging.  Just tell kdb
+ * where the start and end of the physical and logical logs are.  This
+ * is equivalent to do_syslog(3).
+ */
+void kdb_syslog_data(char *syslog_data[4])
+{
+	syslog_data[0] = log_buf;
+	syslog_data[1] = log_buf + log_buf_len;
+	syslog_data[2] = log_buf + log_end -
+		(logged_chars < log_buf_len ? logged_chars : log_buf_len);
+	syslog_data[3] = log_buf + log_end;
+}
+#endif	/* CONFIG_KGDB_KDB */
+
 /*
  * Call the console drivers on a range of log_buf
  */
@@ -586,6 +603,14 @@ asmlinkage int printk(const char *fmt, ...)
 	va_list args;
 	int r;
 
+#ifdef CONFIG_KGDB_KDB
+	if (unlikely(kdb_trap_printk)) {
+		va_start(args, fmt);
+		r = vkdb_printf(fmt, args);
+		va_end(args);
+		return r;
+	}
+#endif
 	va_start(args, fmt);
 	r = vprintk(fmt, args);
 	va_end(args);
diff --git a/kernel/sched.c b/kernel/sched.c
index d9c0368..054a601 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7759,9 +7759,9 @@ void normalize_rt_tasks(void)
 
 #endif /* CONFIG_MAGIC_SYSRQ */
 
-#ifdef CONFIG_IA64
+#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB)
 /*
- * These functions are only useful for the IA64 MCA handling.
+ * These functions are only useful for the IA64 MCA handling, or kdb.
  *
  * They can only be called when the whole system has been
  * stopped - every CPU needs to be quiescent, and no scheduling
@@ -7781,6 +7781,9 @@ struct task_struct *curr_task(int cpu)
 	return cpu_curr(cpu);
 }
 
+#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */
+
+#ifdef CONFIG_IA64
 /**
  * set_curr_task - set the current task for a given cpu.
  * @cpu: the processor in question.
diff --git a/kernel/signal.c b/kernel/signal.c
index dbd7fe0..825a3f2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2735,3 +2735,43 @@ void __init signals_init(void)
 {
 	sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC);
 }
+
+#ifdef CONFIG_KGDB_KDB
+#include <linux/kdb.h>
+/*
+ * kdb_send_sig_info - Allows kdb to send signals without exposing
+ * signal internals.  This function checks if the required locks are
+ * available before calling the main signal code, to avoid kdb
+ * deadlocks.
+ */
+void
+kdb_send_sig_info(struct task_struct *t, struct siginfo *info)
+{
+	static struct task_struct *kdb_prev_t;
+	int sig, new_t;
+	if (!spin_trylock(&t->sighand->siglock)) {
+		kdb_printf("Can't do kill command now.\n"
+			   "The sigmask lock is held somewhere else in "
+			   "kernel, try again later\n");
+		return;
+	}
+	spin_unlock(&t->sighand->siglock);
+	new_t = kdb_prev_t != t;
+	kdb_prev_t = t;
+	if (t->state != TASK_RUNNING && new_t) {
+		kdb_printf("Process is not RUNNING, sending a signal from "
+			   "kdb risks deadlock\n"
+			   "on the run queue locks. "
+			   "The signal has _not_ been sent.\n"
+			   "Reissue the kill command if you want to risk "
+			   "the deadlock.\n");
+		return;
+	}
+	sig = info->si_signo;
+	if (send_sig_info(sig, info, t))
+		kdb_printf("Fail to deliver Signal %d to process %d.\n",
+			   sig, t->pid);
+	else
+		kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid);
+}
+#endif	/* CONFIG_KGDB_KDB */