diff options
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx3fb.h | 38 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/mx3fb.c | 1555 |
4 files changed, 0 insertions, 1606 deletions
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h deleted file mode 100644 index e391a76..0000000 --- a/arch/arm/plat-mxc/include/mach/mx3fb.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MX3FB_H__ -#define __ASM_ARCH_MX3FB_H__ - -#include <linux/device.h> -#include <linux/fb.h> - -/* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 - -/** - * struct mx3fb_platform_data - mx3fb platform data - * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode - */ -struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; -}; - -#endif diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index bf0af66..6f3f3bf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2125,18 +2125,6 @@ config FB_PRE_INIT_FB Select this option if display contents should be inherited as set by the bootloader. -config FB_MX3 - tristate "MX3 Framebuffer support" - depends on FB && MX3_IPU - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - default y - help - This is a framebuffer device for the i.MX31 LCD Controller. So - far only synchronous displays are supported. If you plan to use - an LCD display with your i.MX31 system, say Y here. - source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2a998ca..be2b657 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -132,7 +132,6 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o -obj-$(CONFIG_FB_MX3) += mx3fb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c deleted file mode 100644 index 8a75d05..0000000 --- a/drivers/video/mx3fb.c +++ /dev/null @@ -1,1555 +0,0 @@ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/fb.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/dma-mapping.h> -#include <linux/dmaengine.h> -#include <linux/console.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <mach/hardware.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> - -#include <asm/io.h> -#include <asm/uaccess.h> - -#define MX3FB_NAME "mx3_sdc_fb" - -#define MX3FB_REG_OFFSET 0xB4 - -/* SDC Registers */ -#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) -#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) -#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) -#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) -#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) -#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) -#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) -#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) -#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) -#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) -#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) - -/* Register bits */ -#define SDC_COM_TFT_COLOR 0x00000001UL -#define SDC_COM_FG_EN 0x00000010UL -#define SDC_COM_GWSEL 0x00000020UL -#define SDC_COM_GLB_A 0x00000040UL -#define SDC_COM_KEY_COLOR_G 0x00000080UL -#define SDC_COM_BG_EN 0x00000200UL -#define SDC_COM_SHARP 0x00001000UL - -#define SDC_V_SYNC_WIDTH_L 0x00000001UL - -/* Display Interface registers */ -#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) -#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) -#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) -#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) -#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) -#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) -#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) -#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) -#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) -#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) -#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) -#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) -#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) -#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) -#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) -#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) -#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) -#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) -#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) -#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) -#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) -#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) -#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) -#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) -#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) -#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) -#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) -#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) -#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) -#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) -#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) -#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) -#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) -#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) -#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) -#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) -#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) -#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) -#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) - -/* DI_DISP_SIG_POL bits */ -#define DI_D3_VSYNC_POL_SHIFT 28 -#define DI_D3_HSYNC_POL_SHIFT 27 -#define DI_D3_DRDY_SHARP_POL_SHIFT 26 -#define DI_D3_CLK_POL_SHIFT 25 -#define DI_D3_DATA_POL_SHIFT 24 - -/* DI_DISP_IF_CONF bits */ -#define DI_D3_CLK_IDLE_SHIFT 26 -#define DI_D3_CLK_SEL_SHIFT 25 -#define DI_D3_DATAMSK_SHIFT 24 - -enum ipu_panel { - IPU_PANEL_SHARP_TFT, - IPU_PANEL_TFT, -}; - -struct ipu_di_signal_cfg { - unsigned datamask_en:1; - unsigned clksel_en:1; - unsigned clkidle_en:1; - unsigned data_pol:1; /* true = inverted */ - unsigned clk_pol:1; /* true = rising edge */ - unsigned enable_pol:1; - unsigned Hsync_pol:1; /* true = active high */ - unsigned Vsync_pol:1; -}; - -static const struct fb_videomode mx3fb_modedb[] = { - { - /* 240x320 @ 60 Hz */ - .name = "Sharp-QVGA", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | - FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | - FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x33 @ 60 Hz */ - .name = "Sharp-CLI", - .refresh = 60, - .xres = 240, - .yres = 33, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9 + 287, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | - FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | - FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 640x480 @ 60 Hz */ - .name = "NEC-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 34, - .lower_margin = 40, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* NTSC TV output */ - .name = "TV-NTSC", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 37538, - .left_margin = 38, - .right_margin = 858 - 640 - 38 - 3, - .upper_margin = 36, - .lower_margin = 518 - 480 - 36 - 1, - .hsync_len = 3, - .vsync_len = 1, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* PAL TV output */ - .name = "TV-PAL", - .refresh = 50, - .xres = 640, - .yres = 480, - .pixclock = 37538, - .left_margin = 38, - .right_margin = 960 - 640 - 38 - 32, - .upper_margin = 32, - .lower_margin = 555 - 480 - 32 - 3, - .hsync_len = 32, - .vsync_len = 3, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* TV output VGA mode, 640x480 @ 65 Hz */ - .name = "TV-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 40574, - .left_margin = 35, - .right_margin = 45, - .upper_margin = 9, - .lower_margin = 1, - .hsync_len = 46, - .vsync_len = 5, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -struct mx3fb_data { - struct fb_info *fbi; - int backlight_level; - void __iomem *reg_base; - spinlock_t lock; - struct device *dev; - - uint32_t h_start_width; - uint32_t v_start_width; -}; - -struct dma_chan_request { - struct mx3fb_data *mx3fb; - enum ipu_channel id; -}; - -/* MX3 specific framebuffer information. */ -struct mx3fb_info { - int blank; - enum ipu_channel ipu_ch; - uint32_t cur_ipu_buf; - - u32 pseudo_palette[16]; - - struct completion flip_cmpl; - struct mutex mutex; /* Protects fb-ops */ - struct mx3fb_data *mx3fb; - struct idmac_channel *idmac_channel; - struct dma_async_tx_descriptor *txd; - dma_cookie_t cookie; - struct scatterlist sg[2]; - - u32 sync; /* preserve var->sync flags */ -}; - -static void mx3fb_dma_done(void *); - -/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ -static const char *fb_mode; -static unsigned long default_bpp = 16; - -static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) -{ - return __raw_readl(mx3fb->reg_base + reg); -} - -static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) -{ - __raw_writel(value, mx3fb->reg_base + reg); -} - -static const uint32_t di_mappings[] = { - 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ - 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ - 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ - 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ -}; - -static void sdc_fb_init(struct mx3fb_info *fbi) -{ - struct mx3fb_data *mx3fb = fbi->mx3fb; - uint32_t reg; - - reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); - - mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); -} - -/* Returns enabled flag before uninit */ -static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) -{ - struct mx3fb_data *mx3fb = fbi->mx3fb; - uint32_t reg; - - reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); - - mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); - - return reg & SDC_COM_BG_EN; -} - -static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) -{ - struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; - struct idmac_channel *ichan = mx3_fbi->idmac_channel; - struct dma_chan *dma_chan = &ichan->dma_chan; - unsigned long flags; - dma_cookie_t cookie; - - dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, - to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); - - /* This enables the channel */ - if (mx3_fbi->cookie < 0) { - mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, - &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); - if (!mx3_fbi->txd) { - dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", - dma_chan->chan_id); - return; - } - - mx3_fbi->txd->callback_param = mx3_fbi->txd; - mx3_fbi->txd->callback = mx3fb_dma_done; - - cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); - dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, - mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); - } else { - if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { - dev_err(mx3fb->dev, "Cannot enable channel %d\n", - dma_chan->chan_id); - return; - } - - /* Just re-activate the same buffer */ - dma_async_issue_pending(dma_chan); - cookie = mx3_fbi->cookie; - dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, - mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); - } - - if (cookie >= 0) { - spin_lock_irqsave(&mx3fb->lock, flags); - sdc_fb_init(mx3_fbi); - mx3_fbi->cookie = cookie; - spin_unlock_irqrestore(&mx3fb->lock, flags); - } - - /* - * Attention! Without this msleep the channel keeps generating - * interrupts. Next sdc_set_brightness() is going to be called - * from mx3fb_blank(). - */ - msleep(2); -} - -static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) -{ - struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; - uint32_t enabled; - unsigned long flags; - - spin_lock_irqsave(&mx3fb->lock, flags); - - enabled = sdc_fb_uninit(mx3_fbi); - - spin_unlock_irqrestore(&mx3fb->lock, flags); - - mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); - mx3_fbi->txd = NULL; - mx3_fbi->cookie = -EINVAL; -} - -/** - * sdc_set_window_pos() - set window position of the respective plane. - * @mx3fb: mx3fb context. - * @channel: IPU DMAC channel ID. - * @x_pos: X coordinate relative to the top left corner to place window at. - * @y_pos: Y coordinate relative to the top left corner to place window at. - * @return: 0 on success or negative error code on failure. - */ -static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, - int16_t x_pos, int16_t y_pos) -{ - x_pos += mx3fb->h_start_width; - y_pos += mx3fb->v_start_width; - - if (channel != IDMAC_SDC_0) - return -EINVAL; - - mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); - return 0; -} - -/** - * sdc_init_panel() - initialize a synchronous LCD panel. - * @mx3fb: mx3fb context. - * @panel: panel type. - * @pixel_clk: desired pixel clock frequency in Hz. - * @width: width of panel in pixels. - * @height: height of panel in pixels. - * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. - * @h_start_width: number of pixel clocks between the HSYNC signal pulse - * and the start of valid data. - * @h_sync_width: width of the HSYNC signal in units of pixel clocks. - * @h_end_width: number of pixel clocks between the end of valid data - * and the HSYNC signal for next line. - * @v_start_width: number of lines between the VSYNC signal pulse and the - * start of valid data. - * @v_sync_width: width of the VSYNC signal in units of lines - * @v_end_width: number of lines between the end of valid data and the - * VSYNC signal for next frame. - * @sig: bitfield of signal polarities for LCD interface. - * @return: 0 on success or negative error code on failure. - */ -static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, - uint32_t pixel_clk, - uint16_t width, uint16_t height, - enum pixel_fmt pixel_fmt, - uint16_t h_start_width, uint16_t h_sync_width, - uint16_t h_end_width, uint16_t v_start_width, - uint16_t v_sync_width, uint16_t v_end_width, - struct ipu_di_signal_cfg sig) -{ - unsigned long lock_flags; - uint32_t reg; - uint32_t old_conf; - uint32_t div; - struct clk *ipu_clk; - - dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); - - if (v_sync_width == 0 || h_sync_width == 0) - return -EINVAL; - - /* Init panel size and blanking periods */ - reg = ((uint32_t) (h_sync_width - 1) << 26) | - ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); - mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); - -#ifdef DEBUG - printk(KERN_CONT " hor_conf %x,", reg); -#endif - - reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | - ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); - mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); - -#ifdef DEBUG - printk(KERN_CONT " ver_conf %x\n", reg); -#endif - - mx3fb->h_start_width = h_start_width; - mx3fb->v_start_width = v_start_width; - - switch (panel) { - case IPU_PANEL_SHARP_TFT: - mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); - mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); - mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); - break; - case IPU_PANEL_TFT: - mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); - break; - default: - return -EINVAL; - } - - /* Init clocking */ - - /* - * Calculate divider: fractional part is 4 bits so simply multiple by - * 24 to get fractional part, as long as we stay under ~250MHz and on - * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz - */ - dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); - - ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); - div = clk_get_rate(ipu_clk) * 16 / pixel_clk; - clk_put(ipu_clk); - - if (div < 0x40) { /* Divider less than 4 */ - dev_dbg(mx3fb->dev, - "InitPanel() - Pixel clock divider less than 4\n"); - div = 0x40; - } - - spin_lock_irqsave(&mx3fb->lock, lock_flags); - - /* - * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits - * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing - * debug. DISP3_IF_CLK_UP_WR is 0 - */ - mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); - - /* DI settings */ - old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; - old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | - sig.clksel_en << DI_D3_CLK_SEL_SHIFT | - sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; - mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); - - old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; - old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | - sig.clk_pol << DI_D3_CLK_POL_SHIFT | - sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | - sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | - sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; - mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); - - switch (pixel_fmt) { - case IPU_PIX_FMT_RGB24: - mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); - mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); - mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); - mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | - ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); - break; - case IPU_PIX_FMT_RGB666: - mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); - mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); - mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); - mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | - ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); - break; - case IPU_PIX_FMT_BGR666: - mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); - mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); - mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); - mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | - ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); - break; - default: - mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); - mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); - mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); - mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | - ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); - break; - } - - spin_unlock_irqrestore(&mx3fb->lock, lock_flags); - - dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", - mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); - dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", - mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); - dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", - mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); - - return 0; -} - -/** - * sdc_set_color_key() - set the transparent color key for SDC graphic plane. - * @mx3fb: mx3fb context. - * @channel: IPU DMAC channel ID. - * @enable: boolean to enable or disable color keyl. - * @color_key: 24-bit RGB color to use as transparent color key. - * @return: 0 on success or negative error code on failure. - */ -static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, - bool enable, uint32_t color_key) -{ - uint32_t reg, sdc_conf; - unsigned long lock_flags; - - spin_lock_irqsave(&mx3fb->lock, lock_flags); - - sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); - if (channel == IDMAC_SDC_0) - sdc_conf &= ~SDC_COM_GWSEL; - else - sdc_conf |= SDC_COM_GWSEL; - - if (enable) { - reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; - mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), - SDC_GW_CTRL); - - sdc_conf |= SDC_COM_KEY_COLOR_G; - } else { - sdc_conf &= ~SDC_COM_KEY_COLOR_G; - } - mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); - - spin_unlock_irqrestore(&mx3fb->lock, lock_flags); - - return 0; -} - -/** - * sdc_set_global_alpha() - set global alpha blending modes. - * @mx3fb: mx3fb context. - * @enable: boolean to enable or disable global alpha blending. If disabled, - * per pixel blending is used. - * @alpha: global alpha value. - * @return: 0 on success or negative error code on failure. - */ -static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) -{ - uint32_t reg; - unsigned long lock_flags; - - spin_lock_irqsave(&mx3fb->lock, lock_flags); - - if (enable) { - reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; - mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); - - reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); - mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); - } else { - reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); - mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); - } - - spin_unlock_irqrestore(&mx3fb->lock, lock_flags); - - return 0; -} - -static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) -{ - /* This might be board-specific */ - mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); - return; -} - -static uint32_t bpp_to_pixfmt(int bpp) -{ - uint32_t pixfmt = 0; - switch (bpp) { - case 24: - pixfmt = IPU_PIX_FMT_BGR24; - break; - case 32: - pixfmt = IPU_PIX_FMT_BGR32; - break; - case 16: - pixfmt = IPU_PIX_FMT_RGB565; - break; - } - return pixfmt; -} - -static int mx3fb_blank(int blank, struct fb_info *fbi); -static int mx3fb_map_video_memory(struct fb_info *fbi); -static int mx3fb_unmap_video_memory(struct fb_info *fbi); - -/** - * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. - * @info: framebuffer information pointer - * @return: 0 on success or negative error code on failure. - */ -static int mx3fb_set_fix(struct fb_info *fbi) -{ - struct fb_fix_screeninfo *fix = &fbi->fix; - struct fb_var_screeninfo *var = &fbi->var; - - strncpy(fix->id, "DISP3 BG", 8); - - fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; - - fix->type = FB_TYPE_PACKED_PIXELS; - fix->accel = FB_ACCEL_NONE; - fix->visual = FB_VISUAL_TRUECOLOR; - fix->xpanstep = 1; - fix->ypanstep = 1; - - return 0; -} - -static void mx3fb_dma_done(void *arg) -{ - struct idmac_tx_desc *tx_desc = to_tx_desc(arg); - struct dma_chan *chan = tx_desc->txd.chan; - struct idmac_channel *ichannel = to_idmac_chan(chan); - struct mx3fb_data *mx3fb = ichannel->client; - struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; - - dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); - - /* We only need one interrupt, it will be re-enabled as needed */ - disable_irq(ichannel->eof_irq); - - complete(&mx3_fbi->flip_cmpl); -} - -/** - * mx3fb_set_par() - set framebuffer parameters and change the operating mode. - * @fbi: framebuffer information pointer. - * @return: 0 on success or negative error code on failure. - */ -static int mx3fb_set_par(struct fb_info *fbi) -{ - u32 mem_len; - struct ipu_di_signal_cfg sig_cfg; - enum ipu_panel mode = IPU_PANEL_TFT; - struct mx3fb_info *mx3_fbi = fbi->par; - struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; - struct idmac_channel *ichan = mx3_fbi->idmac_channel; - struct idmac_video_param *video = &ichan->params.video; - struct scatterlist *sg = mx3_fbi->sg; - size_t screen_size; - - dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); - - mutex_lock(&mx3_fbi->mutex); - - /* Total cleanup */ - if (mx3_fbi->txd) - sdc_disable_channel(mx3_fbi); - - mx3fb_set_fix(fbi); - - mem_len = fbi->var.yres_virtual * fbi->fix.line_length; - if (mem_len > fbi->fix.smem_len) { - if (fbi->fix.smem_start) - mx3fb_unmap_video_memory(fbi); - - fbi->fix.smem_len = mem_len; - if (mx3fb_map_video_memory(fbi) < 0) { - mutex_unlock(&mx3_fbi->mutex); - return -ENOMEM; - } - } - - screen_size = fbi->fix.line_length * fbi->var.yres; - - sg_init_table(&sg[0], 1); - sg_init_table(&sg[1], 1); - - sg_dma_address(&sg[0]) = fbi->fix.smem_start; - sg_set_page(&sg[0], virt_to_page(fbi->screen_base), - fbi->fix.smem_len, - offset_in_page(fbi->screen_base)); - - if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { - memset(&sig_cfg, 0, sizeof(sig_cfg)); - if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) - sig_cfg.Hsync_pol = true; - if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) - sig_cfg.Vsync_pol = true; - if (fbi->var.sync & FB_SYNC_CLK_INVERT) - sig_cfg.clk_pol = true; - if (fbi->var.sync & FB_SYNC_DATA_INVERT) - sig_cfg.data_pol = true; - if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) - sig_cfg.enable_pol = true; - if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) - sig_cfg.clkidle_en = true; - if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) - sig_cfg.clksel_en = true; - if (fbi->var.sync & FB_SYNC_SHARP_MODE) - mode = IPU_PANEL_SHARP_TFT; - - dev_dbg(fbi->device, "pixclock = %ul Hz\n", - (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); - - if (sdc_init_panel(mx3fb, mode, - (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, - fbi->var.xres, fbi->var.yres, - (fbi->var.sync & FB_SYNC_SWAP_RGB) ? - IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, - fbi->var.left_margin, - fbi->var.hsync_len, - fbi->var.right_margin + - fbi->var.hsync_len, - fbi->var.upper_margin, - fbi->var.vsync_len, - fbi->var.lower_margin + - fbi->var.vsync_len, sig_cfg) != 0) { - mutex_unlock(&mx3_fbi->mutex); - dev_err(fbi->device, - "mx3fb: Error initializing panel.\n"); - return -EINVAL; - } - } - - sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); - - mx3_fbi->cur_ipu_buf = 0; - - video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); - video->out_width = fbi->var.xres; - video->out_height = fbi->var.yres; - video->out_stride = fbi->var.xres_virtual; - - if (mx3_fbi->blank == FB_BLANK_UNBLANK) - sdc_enable_channel(mx3_fbi); - - mutex_unlock(&mx3_fbi->mutex); - - return 0; -} - -/** - * mx3fb_check_var() - check and adjust framebuffer variable parameters. - * @var: framebuffer variable parameters - * @fbi: framebuffer information pointer - */ -static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) -{ - struct mx3fb_info *mx3_fbi = fbi->par; - u32 vtotal; - u32 htotal; - - dev_dbg(fbi->device, "%s\n", __func__); - - if (var->xres_virtual < var->xres) - var->xres_virtual = var->xres; - if (var->yres_virtual < var->yres) - var->yres_virtual = var->yres; - - if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && - (var->bits_per_pixel != 16)) - var->bits_per_pixel = default_bpp; - - switch (var->bits_per_pixel) { - case 16: - var->red.length = 5; - var->red.offset = 11; - var->red.msb_right = 0; - - var->green.length = 6; - var->green.offset = 5; - var->green.msb_right = 0; - - var->blue.length = 5; - var->blue.offset = 0; - var->blue.msb_right = 0; - - var->transp.length = 0; - var->transp.offset = 0; - var->transp.msb_right = 0; - break; - case 24: - var->red.length = 8; - var->red.offset = 16; - var->red.msb_right = 0; - - var->green.length = 8; - var->green.offset = 8; - var->green.msb_right = 0; - - var->blue.length = 8; - var->blue.offset = 0; - var->blue.msb_right = 0; - - var->transp.length = 0; - var->transp.offset = 0; - var->transp.msb_right = 0; - break; - case 32: - var->red.length = 8; - var->red.offset = 16; - var->red.msb_right = 0; - - var->green.length = 8; - var->green.offset = 8; - var->green.msb_right = 0; - - var->blue.length = 8; - var->blue.offset = 0; - var->blue.msb_right = 0; - - var->transp.length = 8; - var->transp.offset = 24; - var->transp.msb_right = 0; - break; - } - - if (var->pixclock < 1000) { - htotal = var->xres + var->right_margin + var->hsync_len + - var->left_margin; - vtotal = var->yres + var->lower_margin + var->vsync_len + - var->upper_margin; - var->pixclock = (vtotal * htotal * 6UL) / 100UL; - var->pixclock = KHZ2PICOS(var->pixclock); - dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", - var->pixclock); - } - - var->height = -1; - var->width = -1; - var->grayscale = 0; - - /* Preserve sync flags */ - var->sync |= mx3_fbi->sync; - mx3_fbi->sync |= var->sync; - - return 0; -} - -static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) -{ - chan &= 0xffff; - chan >>= 16 - bf->length; - return chan << bf->offset; -} - -static int mx3fb_setcolreg(unsigned int regno, unsigned int red, - unsigned int green, unsigned int blue, - unsigned int trans, struct fb_info *fbi) -{ - struct mx3fb_info *mx3_fbi = fbi->par; - u32 val; - int ret = 1; - - dev_dbg(fbi->device, "%s\n", __func__); - - mutex_lock(&mx3_fbi->mutex); - /* - * If greyscale is true, then we convert the RGB value - * to greyscale no matter what visual we are using. - */ - if (fbi->var.grayscale) - red = green = blue = (19595 * red + 38470 * green + - 7471 * blue) >> 16; - switch (fbi->fix.visual) { - case FB_VISUAL_TRUECOLOR: - /* - * 16-bit True Colour. We encode the RGB value - * according to the RGB bitfield information. - */ - if (regno < 16) { - u32 *pal = fbi->pseudo_palette; - - val = chan_to_field(red, &fbi->var.red); - val |= chan_to_field(green, &fbi->var.green); - val |= chan_to_field(blue, &fbi->var.blue); - - pal[regno] = val; - - ret = 0; - } - break; - - case FB_VISUAL_STATIC_PSEUDOCOLOR: - case FB_VISUAL_PSEUDOCOLOR: - break; - } - mutex_unlock(&mx3_fbi->mutex); - - return ret; -} - -/** - * mx3fb_blank() - blank the display. - */ -static int mx3fb_blank(int blank, struct fb_info *fbi) -{ - struct mx3fb_info *mx3_fbi = fbi->par; - struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; - - dev_dbg(fbi->device, "%s\n", __func__); - - dev_dbg(fbi->device, "blank = %d\n", blank); - - if (mx3_fbi->blank == blank) - return 0; - - mutex_lock(&mx3_fbi->mutex); - mx3_fbi->blank = blank; - - switch (blank) { - case FB_BLANK_POWERDOWN: - case FB_BLANK_VSYNC_SUSPEND: - case FB_BLANK_HSYNC_SUSPEND: - case FB_BLANK_NORMAL: - sdc_disable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, 0); - break; - case FB_BLANK_UNBLANK: - sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, mx3fb->backlight_level); - break; - } - mutex_unlock(&mx3_fbi->mutex); - - return 0; -} - -/** - * mx3fb_pan_display() - pan or wrap the display - * @var: variable screen buffer information. - * @info: framebuffer information pointer. - * - * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag - */ -static int mx3fb_pan_display(struct fb_var_screeninfo *var, - struct fb_info *fbi) -{ - struct mx3fb_info *mx3_fbi = fbi->par; - u32 y_bottom; - unsigned long base; - off_t offset; - dma_cookie_t cookie; - struct scatterlist *sg = mx3_fbi->sg; - struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; - struct dma_async_tx_descriptor *txd; - int ret; - - dev_dbg(fbi->device, "%s [%c]\n", __func__, - list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); - - if (var->xoffset > 0) { - dev_dbg(fbi->device, "x panning not supported\n"); - return -EINVAL; - } - - if (fbi->var.xoffset == var->xoffset && - fbi->var.yoffset == var->yoffset) - return 0; /* No change, do nothing */ - - y_bottom = var->yoffset; - - if (!(var->vmode & FB_VMODE_YWRAP)) - y_bottom += var->yres; - - if (y_bottom > fbi->var.yres_virtual) - return -EINVAL; - - mutex_lock(&mx3_fbi->mutex); - - offset = (var->yoffset * var->xres_virtual + var->xoffset) * - (var->bits_per_pixel / 8); - base = fbi->fix.smem_start + offset; - - dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", - mx3_fbi->cur_ipu_buf, base); - - /* - * We enable the End of Frame interrupt, which will free a tx-descriptor, - * which we will need for the next device_prep_slave_sg(). The - * IRQ-handler will disable the IRQ again. - */ - init_completion(&mx3_fbi->flip_cmpl); - enable_irq(mx3_fbi->idmac_channel->eof_irq); - - ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); - if (ret <= 0) { - mutex_unlock(&mx3_fbi->mutex); - dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? - "user interrupt" : "timeout"); - return ret ? : -ETIMEDOUT; - } - - mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; - - sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; - sg_set_page(&sg[mx3_fbi->cur_ipu_buf], - virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, - offset_in_page(fbi->screen_base + offset)); - - txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + - mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); - if (!txd) { - dev_err(fbi->device, - "Error preparing a DMA transaction descriptor.\n"); - mutex_unlock(&mx3_fbi->mutex); - return -EIO; - } - - txd->callback_param = txd; - txd->callback = mx3fb_dma_done; - - /* - * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() - * should switch to another buffer - */ - cookie = txd->tx_submit(txd); - dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); - if (cookie < 0) { - dev_err(fbi->device, - "Error updating SDC buf %d to address=0x%08lX\n", - mx3_fbi->cur_ipu_buf, base); - mutex_unlock(&mx3_fbi->mutex); - return -EIO; - } - - if (mx3_fbi->txd) - async_tx_ack(mx3_fbi->txd); - mx3_fbi->txd = txd; - - fbi->var.xoffset = var->xoffset; - fbi->var.yoffset = var->yoffset; - - if (var->vmode & FB_VMODE_YWRAP) - fbi->var.vmode |= FB_VMODE_YWRAP; - else - fbi->var.vmode &= ~FB_VMODE_YWRAP; - - mutex_unlock(&mx3_fbi->mutex); - - dev_dbg(fbi->device, "Update complete\n"); - - return 0; -} - -/* - * This structure contains the pointers to the control functions that are - * invoked by the core framebuffer driver to perform operations like - * blitting, rectangle filling, copy regions and cursor definition. - */ -static struct fb_ops mx3fb_ops = { - .owner = THIS_MODULE, - .fb_set_par = mx3fb_set_par, - .fb_check_var = mx3fb_check_var, - .fb_setcolreg = mx3fb_setcolreg, - .fb_pan_display = mx3fb_pan_display, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_blank = mx3fb_blank, -}; - -#ifdef CONFIG_PM -/* - * Power management hooks. Note that we won't be called from IRQ context, - * unlike the blank functions above, so we may sleep. - */ - -/* - * Suspends the framebuffer and blanks the screen. Power management support - */ -static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; - - acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 1); - release_console_sem(); - - if (mx3_fbi->blank == FB_BLANK_UNBLANK) { - sdc_disable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, 0); - - } - return 0; -} - -/* - * Resumes the framebuffer and unblanks the screen. Power management support - */ -static int mx3fb_resume(struct platform_device *pdev) -{ - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; - - if (mx3_fbi->blank == FB_BLANK_UNBLANK) { - sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, drv_data->backlight_level); - } - - acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 0); - release_console_sem(); - - return 0; -} -#else -#define mx3fb_suspend NULL -#define mx3fb_resume NULL -#endif - -/* - * Main framebuffer functions - */ - -/** - * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. - * @fbi: framebuffer information pointer - * @return: Error code indicating success or failure - * - * This buffer is remapped into a non-cached, non-buffered, memory region to - * allow palette and pixel writes to occur without flushing the cache. Once this - * area is remapped, all virtual memory access to the video memory should occur - * at the new region. - */ -static int mx3fb_map_video_memory(struct fb_info *fbi) -{ - int retval = 0; - dma_addr_t addr; - - fbi->screen_base = dma_alloc_writecombine(fbi->device, - fbi->fix.smem_len, - &addr, GFP_DMA); - - if (!fbi->screen_base) { - dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", - fbi->fix.smem_len); - retval = -EBUSY; - goto err0; - } - - fbi->fix.smem_start = addr; - - dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", - (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); - - fbi->screen_size = fbi->fix.smem_len; - - /* Clear the screen */ - memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); - - return 0; - -err0: - fbi->fix.smem_len = 0; - fbi->fix.smem_start = 0; - fbi->screen_base = NULL; - return retval; -} - -/** - * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. - * @fbi: framebuffer information pointer - * @return: error code indicating success or failure - */ -static int mx3fb_unmap_video_memory(struct fb_info *fbi) -{ - dma_free_writecombine(fbi->device, fbi->fix.smem_len, - fbi->screen_base, fbi->fix.smem_start); - - fbi->screen_base = 0; - fbi->fix.smem_start = 0; - fbi->fix.smem_len = 0; - return 0; -} - -/** - * mx3fb_init_fbinfo() - initialize framebuffer information object. - * @return: initialized framebuffer structure. - */ -static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) -{ - struct fb_info *fbi; - struct mx3fb_info *mx3fbi; - int ret; - - /* Allocate sufficient memory for the fb structure */ - fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); - if (!fbi) - return NULL; - - mx3fbi = fbi->par; - mx3fbi->cookie = -EINVAL; - mx3fbi->cur_ipu_buf = 0; - - fbi->var.activate = FB_ACTIVATE_NOW; - - fbi->fbops = ops; - fbi->flags = FBINFO_FLAG_DEFAULT; - fbi->pseudo_palette = mx3fbi->pseudo_palette; - - mutex_init(&mx3fbi->mutex); - - /* Allocate colormap */ - ret = fb_alloc_cmap(&fbi->cmap, 16, 0); - if (ret < 0) { - framebuffer_release(fbi); - return NULL; - } - - return fbi; -} - -static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) -{ - struct device *dev = mx3fb->dev; - struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; - const char *name = mx3fb_pdata->name; - unsigned int irq; - struct fb_info *fbi; - struct mx3fb_info *mx3fbi; - const struct fb_videomode *mode; - int ret, num_modes; - - ichan->client = mx3fb; - irq = ichan->eof_irq; - - if (ichan->dma_chan.chan_id != IDMAC_SDC_0) - return -EINVAL; - - fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); - if (!fbi) - return -ENOMEM; - - if (!fb_mode) - fb_mode = name; - - if (!fb_mode) { - ret = -EINVAL; - goto emode; - } - - if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { - mode = mx3fb_pdata->mode; - num_modes = mx3fb_pdata->num_modes; - } else { - mode = mx3fb_modedb; - num_modes = ARRAY_SIZE(mx3fb_modedb); - } - - if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, - num_modes, NULL, default_bpp)) { - ret = -EBUSY; - goto emode; - } - - fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); - - /* Default Y virtual size is 2x panel size */ - fbi->var.yres_virtual = fbi->var.yres * 2; - - mx3fb->fbi = fbi; - - /* set Display Interface clock period */ - mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); - /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ - - sdc_set_brightness(mx3fb, 255); - sdc_set_global_alpha(mx3fb, true, 0xFF); - sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); - - mx3fbi = fbi->par; - mx3fbi->idmac_channel = ichan; - mx3fbi->ipu_ch = ichan->dma_chan.chan_id; - mx3fbi->mx3fb = mx3fb; - mx3fbi->blank = FB_BLANK_NORMAL; - - init_completion(&mx3fbi->flip_cmpl); - disable_irq(ichan->eof_irq); - dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); - ret = mx3fb_set_par(fbi); - if (ret < 0) - goto esetpar; - - mx3fb_blank(FB_BLANK_UNBLANK, fbi); - - dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); - - ret = register_framebuffer(fbi); - if (ret < 0) - goto erfb; - - return 0; - -erfb: -esetpar: -emode: - fb_dealloc_cmap(&fbi->cmap); - framebuffer_release(fbi); - - return ret; -} - -static bool chan_filter(struct dma_chan *chan, void *arg) -{ - struct dma_chan_request *rq = arg; - struct device *dev; - struct mx3fb_platform_data *mx3fb_pdata; - - if (!rq) - return false; - - dev = rq->mx3fb->dev; - mx3fb_pdata = dev->platform_data; - - return rq->id == chan->chan_id && - mx3fb_pdata->dma_dev == chan->device->dev; -} - -static void release_fbi(struct fb_info *fbi) -{ - mx3fb_unmap_video_memory(fbi); - - fb_dealloc_cmap(&fbi->cmap); - - unregister_framebuffer(fbi); - framebuffer_release(fbi); -} - -static int mx3fb_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - int ret; - struct resource *sdc_reg; - struct mx3fb_data *mx3fb; - dma_cap_mask_t mask; - struct dma_chan *chan; - struct dma_chan_request rq; - - /* - * Display Interface (DI) and Synchronous Display Controller (SDC) - * registers - */ - sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!sdc_reg) - return -EINVAL; - - mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); - if (!mx3fb) - return -ENOMEM; - - spin_lock_init(&mx3fb->lock); - - mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); - if (!mx3fb->reg_base) { - ret = -ENOMEM; - goto eremap; - } - - pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, - mx3fb->reg_base); - - /* IDMAC interface */ - dmaengine_get(); - - mx3fb->dev = dev; - platform_set_drvdata(pdev, mx3fb); - - rq.mx3fb = mx3fb; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - dma_cap_set(DMA_PRIVATE, mask); - rq.id = IDMAC_SDC_0; - chan = dma_request_channel(mask, chan_filter, &rq); - if (!chan) { - ret = -EBUSY; - goto ersdc0; - } - - ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); - if (ret < 0) - goto eisdc0; - - mx3fb->backlight_level = 255; - - return 0; - -eisdc0: - dma_release_channel(chan); -ersdc0: - dmaengine_put(); - iounmap(mx3fb->reg_base); -eremap: - kfree(mx3fb); - dev_err(dev, "mx3fb: failed to register fb\n"); - return ret; -} - -static int mx3fb_remove(struct platform_device *dev) -{ - struct mx3fb_data *mx3fb = platform_get_drvdata(dev); - struct fb_info *fbi = mx3fb->fbi; - struct mx3fb_info *mx3_fbi = fbi->par; - struct dma_chan *chan; - - chan = &mx3_fbi->idmac_channel->dma_chan; - release_fbi(fbi); - - dma_release_channel(chan); - dmaengine_put(); - - iounmap(mx3fb->reg_base); - kfree(mx3fb); - return 0; -} - -static struct platform_driver mx3fb_driver = { - .driver = { - .name = MX3FB_NAME, - }, - .probe = mx3fb_probe, - .remove = mx3fb_remove, - .suspend = mx3fb_suspend, - .resume = mx3fb_resume, -}; - -/* - * Parse user specified options (`video=mx3fb:') - * example: - * video=mx3fb:bpp=16 - */ -static int mx3fb_setup(void) -{ -#ifndef MODULE - char *opt, *options = NULL; - - if (fb_get_options("mx3fb", &options)) - return -ENODEV; - - if (!options || !*options) - return 0; - - while ((opt = strsep(&options, ",")) != NULL) { - if (!*opt) - continue; - if (!strncmp(opt, "bpp=", 4)) - default_bpp = simple_strtoul(opt + 4, NULL, 0); - else - fb_mode = opt; - } -#endif - - return 0; -} - -static int __init mx3fb_init(void) -{ - int ret = mx3fb_setup(); - - if (ret < 0) - return ret; - - ret = platform_driver_register(&mx3fb_driver); - return ret; -} - -static void __exit mx3fb_exit(void) -{ - platform_driver_unregister(&mx3fb_driver); -} - -module_init(mx3fb_init); -module_exit(mx3fb_exit); - -MODULE_AUTHOR("Freescale Semiconductor, Inc."); -MODULE_DESCRIPTION("MX3 framebuffer driver"); -MODULE_ALIAS("platform:" MX3FB_NAME); -MODULE_LICENSE("GPL v2"); |