diff options
320 files changed, 16182 insertions, 5749 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt new file mode 100644 index 0000000..37f4edc --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/DMA.txt @@ -0,0 +1,46 @@ + S3C2410 DMA + =========== + +Introduction +------------ + + The kernel provides an interface to manage DMA transfers + using the DMA channels in the cpu, so that the central + duty of managing channel mappings, and programming the + channel generators is in one place. + + +DMA Channel Ordering +-------------------- + + Many of the range do not have connections for the DMA + channels to all sources, which means that some devices + have a restricted number of channels that can be used. + + To allow flexibilty for each cpu type and board, the + dma code can be given an dma ordering structure which + allows the order of channel search to be specified, as + well as allowing the prohibition of certain claims. + + struct s3c24xx_dma_order has a list of channels, and + each channel within has a slot for a list of dma + channel numbers. The slots are searched in order, for + the presence of a dma channel number with DMA_CH_VALID + orred in. + + If the order has the flag DMA_CH_NEVER set, then after + checking the channel list, the system will return no + found channel, thus denying the request. + + A board support file can call s3c24xx_dma_order_set() + to register an complete ordering set. The routine will + copy the data, so the original can be discared with + __initdata. + + +Authour +------- + +Ben Dooks, +Copyright (c) 2007 Ben Dooks, Simtec Electronics +Licensed under the GPL v2 diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 28d0147..c31b76f 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -8,13 +8,10 @@ Introduction The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, - S3C2440 and S3C2442 devices are supported. + S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported. Support for the S3C2400 series is in progress. - Support for the S3C2412 and S3C2413 CPUs is being merged. - - Configuration ------------- @@ -26,6 +23,22 @@ Configuration please check the machine specific documentation. +Layout +------ + + The core support files are located in the platform code contained in + arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx. + This directory should be kept to items shared between the platform + code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code. + + Each cpu has a directory with the support files for it, and the + machines that carry the device. For example S3C2410 is contained + in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440 + + Register, kernel and platform data definitions are held in the + include/asm-arm/arch-s3c2410 directory. + + Machines -------- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c79519..8bf97e0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -245,6 +245,8 @@ config ARCH_IOP33X config ARCH_IOP13XX bool "IOP13xx-based" + depends on MMU + select PLAT_IOP select PCI help Support for Intel's IOP13XX (XScale) family of processors. @@ -283,6 +285,14 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to <sjhill@cotw.com>. +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + <http://www.digi.com/products/microprocessors/index.jsp> + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" help @@ -292,6 +302,7 @@ config ARCH_PXA bool "PXA2xx-based" depends on MMU select ARCH_MTD_XIP + select GENERIC_TIME help Support for Intel's PXA2XX processor line. @@ -316,7 +327,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -376,7 +387,16 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" +source "arch/arm/plat-s3c24xx/Kconfig" + +if ARCH_S3C2410 +source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" +source "arch/arm/mach-s3c2412/Kconfig" +source "arch/arm/mach-s3c2440/Kconfig" +source "arch/arm/mach-s3c2442/Kconfig" +source "arch/arm/mach-s3c2443/Kconfig" +endif source "arch/arm/mach-lh7a40x/Kconfig" @@ -390,10 +410,12 @@ source "arch/arm/mach-aaec2000/Kconfig" source "arch/arm/mach-realview/Kconfig" -source "arch/arm/mach-at91rm9200/Kconfig" +source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-netx/Kconfig" +source "arch/arm/mach-ns9xxx/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -751,6 +773,20 @@ config XIP_PHYS_ADDR be linked for and stored to. This address is dependent on your own flash usage. +config KEXEC + bool "Kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. + endmenu if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 000f110..1320418 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -124,10 +124,12 @@ endif machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91rm9200 - machine-$(CONFIG_ARCH_EP93XX) := ep93xx - machine-$(CONFIG_ARCH_PNX4008) := pnx4008 - machine-$(CONFIG_ARCH_NETX) := netx + machine-$(CONFIG_ARCH_AT91) := at91rm9200 + machine-$(CONFIG_ARCH_EP93XX) := ep93xx + machine-$(CONFIG_ARCH_PNX4008) := pnx4008 + machine-$(CONFIG_ARCH_NETX) := netx + machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx + textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -149,7 +151,7 @@ MACHINE := arch/arm/mach-$(machine-y)/ else MACHINE := endif - + export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? @@ -161,6 +163,11 @@ endif # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += $(MACHINE) +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/ +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/ +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/ +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/ +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ @@ -168,6 +175,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a common platform directory, then include it in the build. core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ +core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore new file mode 100644 index 0000000..171a085 --- /dev/null +++ b/arch/arm/boot/.gitignore @@ -0,0 +1,2 @@ +Image +zImage diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore new file mode 100644 index 0000000..aefee20 --- /dev/null +++ b/arch/arm/boot/compressed/.gitignore @@ -0,0 +1 @@ +piggy.gz diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 2e635b8..6fbe772 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -32,7 +32,6 @@ #include <asm/cacheflush.h> -#undef DEBUG #undef STATS #ifdef STATS @@ -66,14 +65,13 @@ struct dmabounce_pool { }; struct dmabounce_device_info { - struct list_head node; - struct device *dev; struct list_head safe_buffers; #ifdef STATS unsigned long total_allocs; unsigned long map_op_count; unsigned long bounce_count; + int attr_res; #endif struct dmabounce_pool small; struct dmabounce_pool large; @@ -81,33 +79,23 @@ struct dmabounce_device_info { rwlock_t lock; }; -static LIST_HEAD(dmabounce_devs); - #ifdef STATS -static void print_alloc_stats(struct dmabounce_device_info *device_info) +static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr, + char *buf) { - printk(KERN_INFO - "%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n", - device_info->dev->bus_id, - device_info->small.allocs, device_info->large.allocs, + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; + return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n", + device_info->small.allocs, + device_info->large.allocs, device_info->total_allocs - device_info->small.allocs - device_info->large.allocs, - device_info->total_allocs); + device_info->total_allocs, + device_info->map_op_count, + device_info->bounce_count); } -#endif - -/* find the given device in the dmabounce device list */ -static inline struct dmabounce_device_info * -find_dmabounce_dev(struct device *dev) -{ - struct dmabounce_device_info *d; - list_for_each_entry(d, &dmabounce_devs, node) - if (d->dev == dev) - return d; - - return NULL; -} +static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL); +#endif /* allocate a 'safe' buffer and keep track of it */ @@ -162,8 +150,6 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, if (pool) pool->allocs++; device_info->total_allocs++; - if (device_info->total_allocs % 1000 == 0) - print_alloc_stats(device_info); #endif write_lock_irqsave(&device_info->lock, flags); @@ -218,20 +204,11 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer * /* ************************************************** */ -#ifdef STATS -static void print_map_stats(struct dmabounce_device_info *device_info) -{ - dev_info(device_info->dev, - "dmabounce: map_op_count=%lu, bounce_count=%lu\n", - device_info->map_op_count, device_info->bounce_count); -} -#endif - static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction dir) { - struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; dma_addr_t dma_addr; int needs_bounce = 0; @@ -281,10 +258,14 @@ map_single(struct device *dev, void *ptr, size_t size, ptr = buf->safe; dma_addr = buf->safe_dma_addr; + } else { + /* + * We don't need to sync the DMA buffer since + * it was allocated via the coherent allocators. + */ + consistent_sync(ptr, size, dir); } - consistent_sync(ptr, size, dir); - return dma_addr; } @@ -292,7 +273,7 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; struct safe_buffer *buf = NULL; /* @@ -317,12 +298,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, DO_STATS ( device_info->bounce_count++ ); if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { - unsigned long ptr; + void *ptr = buf->ptr; dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", - __func__, buf->safe, buf->ptr, size); - memcpy(buf->ptr, buf->safe, size); + __func__, buf->safe, ptr, size); + memcpy(ptr, buf->safe, size); /* * DMA buffers must have the same cache properties @@ -332,8 +313,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, * bidirectional case because we know the cache * lines will be coherent with the data written. */ - ptr = (unsigned long)buf->ptr; dmac_clean_range(ptr, ptr + size); + outer_clean_range(__pa(ptr), __pa(ptr) + size); } free_safe_buffer(device_info, buf); } @@ -343,7 +324,7 @@ static inline void sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; struct safe_buffer *buf = NULL; if (device_info) @@ -397,7 +378,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, default: BUG(); } - consistent_sync(buf->safe, size, dir); + /* + * No need to sync the safe buffer - it was allocated + * via the coherent allocators. + */ } else { consistent_sync(dma_to_virt(dev, dma_addr), size, dir); } @@ -604,9 +588,10 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, device_info->total_allocs = 0; device_info->map_op_count = 0; device_info->bounce_count = 0; + device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats); #endif - list_add(&device_info->node, &dmabounce_devs); + dev->archdata.dmabounce = device_info; printk(KERN_INFO "dmabounce: registered device %s on %s bus\n", dev->bus_id, dev->bus->name); @@ -623,7 +608,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, void dmabounce_unregister_dev(struct device *dev) { - struct dmabounce_device_info *device_info = find_dmabounce_dev(dev); + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; + + dev->archdata.dmabounce = NULL; if (!device_info) { printk(KERN_WARNING @@ -645,12 +632,10 @@ dmabounce_unregister_dev(struct device *dev) dma_pool_destroy(device_info->large.pool); #ifdef STATS - print_alloc_stats(device_info); - print_map_stats(device_info); + if (device_info->attr_res == 0) + device_remove_file(dev, &dev_attr_dmabounce_stats); #endif - list_del(&device_info->node); - kfree(device_info); printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n", diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 09b9d1b..4deece5 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -14,7 +14,9 @@ * * o There is one CPU Interface per CPU, which sends interrupts sent * by the Distributor, and interrupts generated locally, to the - * associated CPU. + * associated CPU. The base address of the CPU interface is usually + * aliased so that the same address points to different chips depending + * on the CPU it is accessed from. * * Note that IRQs 0-31 are special - they are local to each CPU. * As such, the enable set/clear, pending set/clear and active bit @@ -31,10 +33,38 @@ #include <asm/mach/irq.h> #include <asm/hardware/gic.h> -static void __iomem *gic_dist_base; -static void __iomem *gic_cpu_base; static DEFINE_SPINLOCK(irq_controller_lock); +struct gic_chip_data { + unsigned int irq_offset; + void __iomem *dist_base; + void __iomem *cpu_base; +}; + +#ifndef MAX_GIC_NR +#define MAX_GIC_NR 1 +#endif + +static struct gic_chip_data gic_data[MAX_GIC_NR]; + +static inline void __iomem *gic_dist_base(unsigned int irq) +{ + struct gic_chip_data *gic_data = get_irq_chip_data(irq); + return gic_data->dist_base; +} + +static inline void __iomem *gic_cpu_base(unsigned int irq) +{ + struct gic_chip_data *gic_data = get_irq_chip_data(irq); + return gic_data->cpu_base; +} + +static inline unsigned int gic_irq(unsigned int irq) +{ + struct gic_chip_data *gic_data = get_irq_chip_data(irq); + return irq - gic_data->irq_offset; +} + /* * Routines to acknowledge, disable and enable interrupts * @@ -55,8 +85,8 @@ static void gic_ack_irq(unsigned int irq) u32 mask = 1 << (irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4); - writel(irq, gic_cpu_base + GIC_CPU_EOI); + writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4); + writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI); spin_unlock(&irq_controller_lock); } @@ -65,7 +95,7 @@ static void gic_mask_irq(unsigned int irq) u32 mask = 1 << (irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4); + writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4); spin_unlock(&irq_controller_lock); } @@ -74,14 +104,14 @@ static void gic_unmask_irq(unsigned int irq) u32 mask = 1 << (irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4); + writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4); spin_unlock(&irq_controller_lock); } #ifdef CONFIG_SMP static void gic_set_cpu(unsigned int irq, cpumask_t mask_val) { - void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3); + void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3); unsigned int shift = (irq % 4) * 8; unsigned int cpu = first_cpu(mask_val); u32 val; @@ -95,6 +125,37 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val) } #endif +static void fastcall gic_handle_cascade_irq(unsigned int irq, + struct irq_desc *desc) +{ + struct gic_chip_data *chip_data = get_irq_data(irq); + struct irq_chip *chip = get_irq_chip(irq); + unsigned int cascade_irq; + unsigned long status; + + /* primary controller ack'ing */ + chip->ack(irq); + + spin_lock(&irq_controller_lock); + status = readl(chip_data->cpu_base + GIC_CPU_INTACK); + spin_unlock(&irq_controller_lock); + + cascade_irq = (status & 0x3ff); + if (cascade_irq > 1020) + goto out; + if (cascade_irq < 32 || cascade_irq >= NR_IRQS) { + do_bad_IRQ(cascade_irq, desc); + goto out; + } + + cascade_irq += chip_data->irq_offset; + generic_handle_irq(cascade_irq); + + out: + /* primary controller unmasking */ + chip->unmask(irq); +} + static struct irq_chip gic_chip = { .name = "GIC", .ack = gic_ack_irq, @@ -105,15 +166,29 @@ static struct irq_chip gic_chip = { #endif }; -void __init gic_dist_init(void __iomem *base) +void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) +{ + if (gic_nr >= MAX_GIC_NR) + BUG(); + if (set_irq_data(irq, &gic_data[gic_nr]) != 0) + BUG(); + set_irq_chained_handler(irq, gic_handle_cascade_irq); +} + +void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, + unsigned int irq_start) { unsigned int max_irq, i; u32 cpumask = 1 << smp_processor_id(); + if (gic_nr >= MAX_GIC_NR) + BUG(); + cpumask |= cpumask << 8; cpumask |= cpumask << 16; - gic_dist_base = base; + gic_data[gic_nr].dist_base = base; + gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31; writel(0, base + GIC_DIST_CTRL); @@ -158,8 +233,9 @@ void __init gic_dist_init(void __iomem *base) /* * Setup the Linux IRQ subsystem. */ - for (i = 29; i < max_irq; i++) { + for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { set_irq_chip(i, &gic_chip); + set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } @@ -167,9 +243,13 @@ void __init gic_dist_init(void __iomem *base) writel(1, base + GIC_DIST_CTRL); } -void __cpuinit gic_cpu_init(void __iomem *base) +void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) { - gic_cpu_base = base; + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_data[gic_nr].cpu_base = base; + writel(0xf0, base + GIC_CPU_PRIMASK); writel(1, base + GIC_CPU_CTRL); } @@ -179,6 +259,7 @@ void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) { unsigned long map = *cpus_addr(cpumask); - writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT); + /* this always happens on GIC0 */ + writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); } #endif diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig new file mode 100644 index 0000000..c72ab82 --- /dev/null +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -0,0 +1,1184 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc1 +# Mon Jan 8 16:06:54 2007 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +CONFIG_ARCH_AT91SAM9263=y + +# +# AT91SAM9263 Board Type +# +CONFIG_MACH_AT91SAM9263EK=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MULTITHREAD_PROBE is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_AT91=m +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index 3de5c64..baa9769 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -1066,7 +1066,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_AT91=y +CONFIG_RTC_DRV_AT91RM9200=y # CONFIG_RTC_DRV_TEST is not set # diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 2cadd51..88e5d28 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set -CONFIG_MTD_CSB337=y # # Self-contained MTD device drivers @@ -986,7 +988,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_AT91=y +CONFIG_RTC_DRV_AT91RM9200=y # CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 94908c1..669f035 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set -CONFIG_MTD_CSB637=y # # Self-contained MTD device drivers diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index a4cdafc..a0f48d5 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -718,7 +718,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_AT91=y +CONFIG_RTC_DRV_AT91RM9200=y # CONFIG_RTC_DRV_TEST is not set # diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig new file mode 100644 index 0000000..0e5794c --- /dev/null +++ b/arch/arm/configs/ns9xxx_defconfig @@ -0,0 +1,621 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Thu Feb 15 20:51:47 2007 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_UTS_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_NS9XXX=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# NS9xxx Implementations +# +CONFIG_MACH_CC9P9360DEV=y +CONFIG_PROCESSOR_NS9360=y +CONFIG_BOARD_A9M9750DEV=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# ISDN subsystem +# + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_ICEDCC=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 3b31a33..df19e36 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc4 -# Fri Nov 3 17:41:31 2006 +# Linux kernel version: 2.6.20 +# Thu Feb 15 11:26:24 2007 # CONFIG_ARM=y # CONFIG_GENERIC_TIME is not set @@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 @@ -37,13 +39,14 @@ CONFIG_SYSVIPC=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -76,7 +79,9 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -110,6 +115,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set @@ -122,54 +128,73 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set +CONFIG_PLAT_S3C24XX=y +CONFIG_CPU_S3C244X=y +CONFIG_PM_SIMTEC=y +# CONFIG_S3C2410_BOOT_WATCHDOG is not set +# CONFIG_S3C2410_BOOT_ERROR_RESET is not set +# CONFIG_S3C2410_PM_DEBUG is not set +# CONFIG_S3C2410_PM_CHECK is not set +CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_MACH_SMDK=y # -# S3C24XX Implementations +# S3C2400 Machines # -# CONFIG_MACH_AML_M5900 is not set -CONFIG_MACH_ANUBIS=y -CONFIG_MACH_OSIRIS=y -CONFIG_ARCH_BAST=y -CONFIG_BAST_PC104_IRQ=y +CONFIG_CPU_S3C2410=y +CONFIG_CPU_S3C2410_DMA=y +CONFIG_S3C2410_PM=y +CONFIG_S3C2410_GPIO=y +CONFIG_S3C2410_CLOCK=y + +# +# S3C2410 Machines +# +CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_H1940=y +CONFIG_PM_H1940=y CONFIG_MACH_N30=y -CONFIG_MACH_SMDK=y -CONFIG_ARCH_SMDK2410=y -CONFIG_ARCH_S3C2440=y -CONFIG_SMDK2440_CPU2440=y -CONFIG_SMDK2440_CPU2442=y -CONFIG_MACH_S3C2413=y -CONFIG_MACH_SMDK2413=y -CONFIG_MACH_VR1000=y -CONFIG_MACH_RX3715=y +CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y -CONFIG_MACH_NEXCODER_2440=y -CONFIG_MACH_VSTMS=y -CONFIG_S3C2410_CLOCK=y -CONFIG_S3C2410_PM=y -CONFIG_CPU_S3C2410_DMA=y -CONFIG_CPU_S3C2410=y -CONFIG_S3C2412_PM=y +CONFIG_MACH_AML_M5900=y +CONFIG_BAST_PC104_IRQ=y +CONFIG_MACH_VR1000=y CONFIG_CPU_S3C2412=y -CONFIG_CPU_S3C244X=y +CONFIG_S3C2412_DMA=y +CONFIG_S3C2412_PM=y + +# +# S3C2412 Machines +# +CONFIG_MACH_SMDK2413=y +CONFIG_MACH_S3C2413=y +CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y +CONFIG_S3C2440_DMA=y + +# +# S3C2440 Machines +# +CONFIG_MACH_ANUBIS=y +CONFIG_MACH_OSIRIS=y +CONFIG_MACH_RX3715=y +CONFIG_ARCH_S3C2440=y +CONFIG_MACH_NEXCODER_2440=y +CONFIG_SMDK2440_CPU2440=y CONFIG_CPU_S3C2442=y # -# S3C2410 Boot +# S3C2442 Machines # -# CONFIG_S3C2410_BOOT_WATCHDOG is not set -# CONFIG_S3C2410_BOOT_ERROR_RESET is not set +CONFIG_SMDK2440_CPU2442=y +CONFIG_CPU_S3C2443=y # -# S3C2410 Setup +# S3C2443 Machines # -CONFIG_S3C2410_DMA=y -# CONFIG_S3C2410_DMA_DEBUG is not set -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set -CONFIG_PM_SIMTEC=y -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 +CONFIG_MACH_SMDK2443=y # # Processor Type @@ -196,6 +221,7 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support @@ -303,6 +329,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -385,6 +412,7 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -531,6 +559,11 @@ CONFIG_BLK_DEV_IDE_BAST=y # CONFIG_SCSI_NETLINK is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -682,7 +715,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set +# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set @@ -700,13 +733,14 @@ CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set # CONFIG_SERIAL_8250_FOURPORT is not set # CONFIG_SERIAL_8250_ACCENT is not set # CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set # CONFIG_SERIAL_8250_HUB6 is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support @@ -755,10 +789,6 @@ CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -863,6 +893,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -870,6 +901,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -952,6 +984,11 @@ CONFIG_FONT_8x16=y # CONFIG_SOUND is not set # +# HID Devices +# +CONFIG_HID=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1028,6 +1065,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1179,9 +1217,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS_PROC_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1191,7 +1226,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -1285,6 +1320,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -1296,6 +1336,8 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y @@ -1311,12 +1353,10 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set @@ -1339,6 +1379,7 @@ CONFIG_DEBUG_S3C2410_UART=0 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1346,3 +1387,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 1b935fb..bb28087 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index f7598cb..ae89cdd 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -356,6 +356,7 @@ CALL(sys_move_pages) /* 345 */ CALL(sys_getcpu) CALL(sys_ni_syscall) /* eventually epoll_pwait */ + CALL(sys_kexec_load) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index cec8378..627d794 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -75,6 +75,7 @@ static struct notifier_block crunch_notifier_block = { static int __init crunch_init(void) { thread_register_notifier(&crunch_notifier_block); + elf_hwcap |= HWCAP_CRUNCH; return 0; } diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 71257e3..f1c0fb9 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -1009,7 +1009,7 @@ ecard_probe(int slot, card_type_t type) ec->fiqmask = 4; } - for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++) + for (i = 0; i < ARRAY_SIZE(blacklist); i++) if (blacklist[i].manufacturer == ec->cid.manufacturer && blacklist[i].product == ec->cid.product) { ec->card_desc = blacklist[i].type; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 8517c3c..cc10a09 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -99,7 +99,6 @@ common_invalid: @ cpsr_<exception>, "old_r0" mov r0, sp - and r2, r6, #0x1f b bad_mode /* diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c new file mode 100644 index 0000000..863c664 --- /dev/null +++ b/arch/arm/kernel/machine_kexec.c @@ -0,0 +1,78 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/cacheflush.h> +#include <asm/mach-types.h> + +const extern unsigned char relocate_new_kernel[]; +const extern unsigned int relocate_new_kernel_size; + +extern void setup_mm_for_reboot(char mode); + +extern unsigned long kexec_start_address; +extern unsigned long kexec_indirection_page; +extern unsigned long kexec_mach_type; + +/* + * Provide a dummy crash_notes definition while crash dump arrives to arm. + * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. + */ + +int machine_kexec_prepare(struct kimage *image) +{ + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ +} + +void machine_shutdown(void) +{ +} + +void machine_crash_shutdown(struct pt_regs *regs) +{ +} + +void machine_kexec(struct kimage *image) +{ + unsigned long page_list; + unsigned long reboot_code_buffer_phys; + void *reboot_code_buffer; + + + page_list = image->head & PAGE_MASK; + + /* we need both effective and real address here */ + reboot_code_buffer_phys = + page_to_pfn(image->control_code_page) << PAGE_SHIFT; + reboot_code_buffer = page_address(image->control_code_page); + + /* Prepare parameters for reboot_code_buffer*/ + kexec_start_address = image->start; + kexec_indirection_page = page_list; + kexec_mach_type = machine_arch_type; + + /* copy our kernel relocation code to the control code page */ + memcpy(reboot_code_buffer, + relocate_new_kernel, relocate_new_kernel_size); + + + flush_icache_range((unsigned long) reboot_code_buffer, + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + printk(KERN_INFO "Bye!\n"); + + cpu_proc_fin(); + setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ + cpu_reset(reboot_code_buffer_phys); +} diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index a9e8f7e..782af3c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -36,7 +36,13 @@ #include <asm/uaccess.h> #include <asm/mach/time.h> -extern const char *processor_modes[]; +static const char *processor_modes[] = { + "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" , + "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26", + "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" , + "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32" +}; + extern void setup_mm_for_reboot(char mode); static volatile int hlt_counter; diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S new file mode 100644 index 0000000..7baadae --- /dev/null +++ b/arch/arm/kernel/relocate_kernel.S @@ -0,0 +1,74 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + */ + +#include <asm/kexec.h> + + .globl relocate_new_kernel +relocate_new_kernel: + + ldr r0,kexec_indirection_page + ldr r1,kexec_start_address + + +0: /* top, read another word for the indirection page */ + ldr r3, [r0],#4 + + /* Is it a destination page. Put destination address to r4 */ + tst r3,#1,0 + beq 1f + bic r4,r3,#1 + b 0b +1: + /* Is it an indirection page */ + tst r3,#2,0 + beq 1f + bic r0,r3,#2 + b 0b +1: + + /* are we done ? */ + tst r3,#4,0 + beq 1f + b 2f + +1: + /* is it source ? */ + tst r3,#8,0 + beq 0b + bic r3,r3,#8 + mov r6,#1024 +9: + ldr r5,[r3],#4 + str r5,[r4],#4 + subs r6,r6,#1 + bne 9b + b 0b + +2: + /* Jump to relocated kernel */ + mov lr,r1 + mov r0,#0 + ldr r1,kexec_mach_type + mov r2,#0 + mov pc,lr + + .globl kexec_start_address +kexec_start_address: + .long 0x0 + + .globl kexec_indirection_page +kexec_indirection_page: + .long 0x0 + + .globl kexec_mach_type +kexec_mach_type: + .long 0x0 + +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel + + diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed52215..03e37af 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user; #ifdef MULTI_CACHE struct cpu_cache_fns cpu_cache; #endif +#ifdef CONFIG_OUTER_CACHE +struct outer_cache_fns outer_cache; +#endif struct stack { u32 irq[3]; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index ee47c53..f61decb 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -40,12 +40,14 @@ */ struct sys_timer *system_timer; +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); -#ifdef CONFIG_SA1100_RTC_MODULE +#ifdef CONFIG_RTC_DRV_CMOS_MODULE EXPORT_SYMBOL(rtc_lock); #endif +#endif /* pc-style 'CMOS' RTC support */ /* change this if you have some constant time drift */ #define USECS_PER_JIFFY (1000000/HZ) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 9089156..2409560 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -32,13 +32,6 @@ #include "ptrace.h" #include "signal.h" -const char *processor_modes[]= -{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" , - "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26", - "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" , - "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32" -}; - static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; #ifdef CONFIG_DEBUG_USER @@ -289,7 +282,10 @@ asmlinkage void do_undefinstr(struct pt_regs *regs) regs->ARM_pc -= correction; pc = (void __user *)instruction_pointer(regs); - if (thumb_mode(regs)) { + + if (processor_mode(regs) == SVC_MODE) { + instr = *(u32 *) pc; + } else if (thumb_mode(regs)) { get_user(instr, (u16 __user *)pc); } else { get_user(instr, (u32 __user *)pc); @@ -337,12 +333,11 @@ asmlinkage void do_unexp_fiq (struct pt_regs *regs) * It never returns, and never tries to sync. We hope that we can at least * dump out some state information... */ -asmlinkage void bad_mode(struct pt_regs *regs, int reason, int proc_mode) +asmlinkage void bad_mode(struct pt_regs *regs, int reason) { console_verbose(); - printk(KERN_CRIT "Bad mode in %s handler detected: mode %s\n", - handler[reason], processor_modes[proc_mode]); + printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]); die("Oops - bad mode", regs, 0); local_irq_disable(); diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91/Kconfig index 9f11db8..bf0d962 100644 --- a/arch/arm/mach-at91rm9200/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -9,11 +9,14 @@ config ARCH_AT91RM9200 bool "AT91RM9200" config ARCH_AT91SAM9260 - bool "AT91SAM9260" + bool "AT91SAM9260 or AT91SAM9XE" config ARCH_AT91SAM9261 bool "AT91SAM9261" +config ARCH_AT91SAM9263 + bool "AT91SAM9263" + endchoice # ---------------------------------------------------------- @@ -90,13 +93,22 @@ endif if ARCH_AT91SAM9260 -comment "AT91SAM9260 Board Type" +comment "AT91SAM9260 Variants" + +config ARCH_AT91SAM9260_SAM9XE + bool "AT91SAM9XE" + depends on ARCH_AT91SAM9260 + help + Select this if you are using Atmel's AT91SAM9XE System-on-Chip. + They are basicaly AT91SAM9260s with various sizes of embedded Flash. + +comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK Evaluation Kit" + bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" depends on ARCH_AT91SAM9260 help - Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit. + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> endif @@ -118,17 +130,32 @@ endif # ---------------------------------------------------------- +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + depends on ARCH_AT91SAM9263 + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +endif + +# ---------------------------------------------------------- + comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) help Enable support for the DataFlash card. config MTD_NAND_AT91_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91/Makefile index cf77700..05de6cd 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o @@ -31,6 +32,9 @@ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o +# AT91SAM9263 board-specific support +obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o + # LEDs support led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o led-$(CONFIG_MACH_AT91RM9200EK) += leds.o diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index e667dcc..e667dcc 100644 --- a/arch/arm/mach-at91rm9200/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index a92e9a4..2ddcdd6 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91rm9200.c + * arch/arm/mach-at91/at91rm9200.c * * Copyright (C) 2005 SAN People * @@ -117,6 +117,36 @@ static struct clk pioD_clk = { .pmc_mask = 1 << AT91RM9200_ID_PIOD, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc1_clk = { + .name = "tc1_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc2_clk = { + .name = "tc2_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc3_clk = { + .name = "tc3_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc4_clk = { + .name = "tc4_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc5_clk = { + .name = "tc5_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC5, + .type = CLK_TYPE_PERIPHERAL, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -132,7 +162,12 @@ static struct clk *periph_clocks[] __initdata = { &twi_clk, &spi_clk, // ssc 0 .. ssc2 - // tc0 .. tc5 + &tc0_clk, + &tc1_clk, + &tc2_clk, + &tc3_clk, + &tc4_clk, + &tc5_clk, &ohci_clk, ðer_clk, // irq0 .. irq6 diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 57fac72..2624a4f 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91rm9200_devices.c + * arch/arm/mach-at91/at91rm9200_devices.c * * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * Copyright (C) 2005 David Brownell @@ -315,7 +315,7 @@ static struct platform_device at91rm9200_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(struct at91_mmc_data *data) +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) { if (!data) return; @@ -361,7 +361,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) platform_device_register(&at91rm9200_mmc_device); } #else -void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif @@ -594,6 +594,10 @@ u8 at91_leds_timer; void __init at91_init_leds(u8 cpu_led, u8 timer_led) { + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + at91_leds_cpu = cpu_led; at91_leds_timer = timer_led; } diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index b999e19..949199a 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c + * linux/arch/arm/mach-at91/at91rm9200_time.c * * Copyright (C) 2003 SAN People * Copyright (C) 2003 ATMEL diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b14871a..6ea41d8 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91sam9260.c + * arch/arm/mach-at91/at91sam9260.c * * Copyright (C) 2006 SAN People * @@ -14,6 +14,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/arch/cpu.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> @@ -27,7 +28,11 @@ static struct map_desc at91sam9260_io_desc[] __initdata = { .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, .type = MT_DEVICE, - }, { + } +}; + +static struct map_desc at91sam9260_sram_desc[] __initdata = { + { .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), .length = AT91SAM9260_SRAM0_SIZE, @@ -37,7 +42,14 @@ static struct map_desc at91sam9260_io_desc[] __initdata = { .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), .length = AT91SAM9260_SRAM1_SIZE, .type = MT_DEVICE, - }, + } +}; + +static struct map_desc at91sam9xe_sram_desc[] __initdata = { + { + .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE), + .type = MT_DEVICE, + } }; /* -------------------------------------------------------------------- @@ -107,13 +119,28 @@ static struct clk spi1_clk = { .pmc_mask = 1 << AT91SAM9260_ID_SPI1, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc1_clk = { + .name = "tc1_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc2_clk = { + .name = "tc2_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC2, + .type = CLK_TYPE_PERIPHERAL, +}; static struct clk ohci_clk = { .name = "ohci_clk", .pmc_mask = 1 << AT91SAM9260_ID_UHP, .type = CLK_TYPE_PERIPHERAL, }; -static struct clk ether_clk = { - .name = "ether_clk", +static struct clk macb_clk = { + .name = "macb_clk", .pmc_mask = 1 << AT91SAM9260_ID_EMAC, .type = CLK_TYPE_PERIPHERAL, }; @@ -137,6 +164,21 @@ static struct clk usart5_clk = { .pmc_mask = 1 << AT91SAM9260_ID_US5, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk tc3_clk = { + .name = "tc3_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc4_clk = { + .name = "tc4_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc5_clk = { + .name = "tc5_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC5, + .type = CLK_TYPE_PERIPHERAL, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -152,14 +194,18 @@ static struct clk *periph_clocks[] __initdata = { &spi0_clk, &spi1_clk, // ssc - // tc0 .. tc2 + &tc0_clk, + &tc1_clk, + &tc2_clk, &ohci_clk, - ðer_clk, + &macb_clk, &isi_clk, &usart3_clk, &usart4_clk, &usart5_clk, - // tc3 .. tc5 + &tc3_clk, + &tc4_clk, + &tc5_clk, // irq0 .. irq2 }; @@ -213,7 +259,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = { static void at91sam9260_reset(void) { - at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -221,11 +267,37 @@ static void at91sam9260_reset(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ +static void __init at91sam9xe_initialize(void) +{ + unsigned long cidr, sram_size; + + cidr = at91_sys_read(AT91_DBGU_CIDR); + + switch (cidr & AT91_CIDR_SRAMSIZ) { + case AT91_CIDR_SRAMSIZ_32K: + sram_size = 2 * SZ_16K; + break; + case AT91_CIDR_SRAMSIZ_16K: + default: + sram_size = SZ_16K; + } + + at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; + at91sam9xe_sram_desc->length = sram_size; + + iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); +} + void __init at91sam9260_initialize(unsigned long main_clock) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); + if (cpu_is_at91sam9xe()) + at91sam9xe_initialize(); + else + iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); + at91_arch_reset = at91sam9260_reset; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index f42d3a4..f7d342c 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91sam9260_devices.c + * arch/arm/mach-at91/at91sam9260_devices.c * * Copyright (C) 2006 Atmel * @@ -128,7 +128,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) static u64 eth_dmamask = 0xffffffffUL; -static struct eth_platform_data eth_data; +static struct at91_eth_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -155,7 +155,7 @@ static struct platform_device at91sam9260_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct eth_platform_data *data) +void __init at91_add_device_eth(struct at91_eth_data *data) { if (!data) return; @@ -192,7 +192,7 @@ void __init at91_add_device_eth(struct eth_platform_data *data) platform_device_register(&at91sam9260_eth_device); } #else -void __init at91_add_device_eth(struct eth_platform_data *data) {} +void __init at91_add_device_eth(struct at91_eth_data *data) {} #endif @@ -229,7 +229,7 @@ static struct platform_device at91sam9260_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(struct at91_mmc_data *data) +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) { if (!data) return; @@ -275,7 +275,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) platform_device_register(&at91sam9260_mmc_device); } #else -void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif @@ -515,6 +515,10 @@ u8 at91_leds_timer; void __init at91_init_leds(u8 cpu_led, u8 timer_led) { + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + at91_leds_cpu = cpu_led; at91_leds_timer = timer_led; } diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index d242bb8..784d1e6 100644 --- a/arch/arm/mach-at91rm9200/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91sam9261.c + * arch/arm/mach-at91/at91sam9261.c * * Copyright (C) 2005 SAN People * @@ -97,6 +97,21 @@ static struct clk spi1_clk = { .pmc_mask = 1 << AT91SAM9261_ID_SPI1, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc1_clk = { + .name = "tc1_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tc2_clk = { + .name = "tc2_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TC2, + .type = CLK_TYPE_PERIPHERAL, +}; static struct clk ohci_clk = { .name = "ohci_clk", .pmc_mask = 1 << AT91SAM9261_ID_UHP, @@ -121,7 +136,9 @@ static struct clk *periph_clocks[] __initdata = { &spi0_clk, &spi1_clk, // ssc 0 .. ssc2 - // tc0 .. tc2 + &tc0_clk, + &tc1_clk, + &tc2_clk, &ohci_clk, &lcdc_clk, // irq0 .. irq2 @@ -208,7 +225,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = { static void at91sam9261_reset(void) { - at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ed1d790..e150476 100644 --- a/arch/arm/mach-at91rm9200/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/at91sam9261_devices.c + * arch/arm/mach-at91/at91sam9261_devices.c * * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * Copyright (C) 2005 David Brownell @@ -159,7 +159,7 @@ static struct platform_device at91sam9261_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(struct at91_mmc_data *data) +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) { if (!data) return; @@ -192,7 +192,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) platform_device_register(&at91sam9261_mmc_device); } #else -void __init at91_add_device_mmc(struct at91_mmc_data *data) {} +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif @@ -513,6 +513,10 @@ u8 at91_leds_timer; void __init at91_init_leds(u8 cpu_led, u8 timer_led) { + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + at91_leds_cpu = cpu_led; at91_leds_timer = timer_led; } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c new file mode 100644 index 0000000..6aa342e --- /dev/null +++ b/arch/arm/mach-at91/at91sam9263.c @@ -0,0 +1,313 @@ +/* + * arch/arm/mach-at91/at91sam9263.c + * + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91sam9263_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE, + .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE), + .length = AT91SAM9263_SRAM0_SIZE, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE, + .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE), + .length = AT91SAM9263_SRAM1_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioA_clk = { + .name = "pioA_clk", + .pmc_mask = 1 << AT91SAM9263_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pmc_mask = 1 << AT91SAM9263_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioCDE_clk = { + .name = "pioCDE_clk", + .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9263_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9263_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9263_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91SAM9263_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91SAM9263_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91SAM9263_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9263_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9263_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91SAM9263_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91SAM9263_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91SAM9263_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9263_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9263_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91SAM9263_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioCDE_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc0_clk, + &mmc1_clk, + // can + &twi_clk, + &spi0_clk, + &spi1_clk, + // ssc0 .. ssc1 + // ac97 + &tcb_clk, + // pwmc + &macb_clk, + // 2dge + &udc_clk, + &isi_clk, + &lcdc_clk, + // dma + &ohci_clk, + // irq0 .. irq1 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91sam9263_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91sam9263_gpio[] = { + { + .id = AT91SAM9263_ID_PIOA, + .offset = AT91_PIOA, + .clock = &pioA_clk, + }, { + .id = AT91SAM9263_ID_PIOB, + .offset = AT91_PIOB, + .clock = &pioB_clk, + }, { + .id = AT91SAM9263_ID_PIOCDE, + .offset = AT91_PIOC, + .clock = &pioCDE_clk, + }, { + .id = AT91SAM9263_ID_PIOCDE, + .offset = AT91_PIOD, + .clock = &pioCDE_clk, + }, { + .id = AT91SAM9263_ID_PIOCDE, + .offset = AT91_PIOE, + .clock = &pioCDE_clk, + } +}; + +static void at91sam9263_reset(void) +{ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); +} + + +/* -------------------------------------------------------------------- + * AT91SAM9263 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91sam9263_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); + + at91_arch_reset = at91sam9263_reset; + at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91sam9263_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9263_gpio, 5); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C, D and E */ + 0, + 0, + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ + 4, /* CAN */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface 0 */ + 6, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller 0 */ + 5, /* Serial Synchronous Controller 1 */ + 6, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, + 0, /* 2D Graphic Engine */ + 3, /* USB Device Port */ + 0, /* Image Sensor Interface */ + 3, /* LDC Controller */ + 0, /* DMA Controller */ + 0, + 3, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +}; + +void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91sam9263_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c new file mode 100644 index 0000000..d9af7ca --- /dev/null +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -0,0 +1,818 @@ +/* + * arch/arm/mach-at91/at91sam9263_devices.c + * + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/platform_device.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9263_matrix.h> + +#include "generic.h" + +#define SZ_512 0x00000200 +#define SZ_256 0x00000100 +#define SZ_16 0x00000010 + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = 0xffffffffUL; +static struct at91_usbh_data usbh_data; + +static struct resource usbh_resources[] = { + [0] = { + .start = AT91SAM9263_UHP_BASE, + .end = AT91SAM9263_UHP_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_UHP, + .end = AT91SAM9263_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbh_data, + }, + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_data = *data; + platform_device_register(&at91_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * USB Device (Gadget) + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_GADGET_AT91 +static struct at91_udc_data udc_data; + +static struct resource udc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_UDP, + .end = AT91SAM9263_BASE_UDP + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_UDP, + .end = AT91SAM9263_ID_UDP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_udc_device = { + .name = "at91_udc", + .id = -1, + .dev = { + .platform_data = &udc_data, + }, + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), +}; + +void __init at91_add_device_udc(struct at91_udc_data *data) +{ + if (!data) + return; + + if (data->vbus_pin) { + at91_set_gpio_input(data->vbus_pin, 0); + at91_set_deglitch(data->vbus_pin, 1); + } + + /* Pullup pin is handled internally by USB device peripheral */ + + udc_data = *data; + platform_device_register(&at91_udc_device); +} +#else +void __init at91_add_device_udc(struct at91_udc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) +static u64 eth_dmamask = 0xffffffffUL; +static struct at91_eth_data eth_data; + +static struct resource eth_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_EMAC, + .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_EMAC, + .end = AT91SAM9263_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_eth_device = { + .name = "macb", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = ð_data, + }, + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ + at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ + + if (!data->is_rmii) { + at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ + } + + eth_data = *data; + platform_device_register(&at91sam9263_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +static u64 mmc_dmamask = 0xffffffffUL; +static struct at91_mmc_data mmc0_data, mmc1_data; + +static struct resource mmc0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_MCI0, + .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_MCI0, + .end = AT91SAM9263_ID_MCI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_mmc0_device = { + .name = "at91_mci", + .id = 0, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc0_data, + }, + .resource = mmc0_resources, + .num_resources = ARRAY_SIZE(mmc0_resources), +}; + +static struct resource mmc1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_MCI1, + .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_MCI1, + .end = AT91SAM9263_ID_MCI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_mmc1_device = { + .name = "at91_mci", + .id = 1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &mmc1_data, + }, + .resource = mmc1_resources, + .num_resources = ARRAY_SIZE(mmc1_resources), +}; + +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + + if (mmc_id == 0) { /* MCI0 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA12, 0); + + if (data->slot_b) { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA16, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA17, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA18, 1); + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + } + } else { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + } + + mmc0_data = *data; + at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91sam9263_mmc0_device); + } else { /* MCI1 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA6, 0); + + if (data->slot_b) { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA21, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA22, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA23, 1); + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + } + } else { + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA8, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + } + + mmc1_data = *data; + at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91sam9263_mmc1_device); + } +} +#else +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + { + .start = NAND_BASE, + .end = NAND_BASE + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + unsigned long csa, mode; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) + | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + + at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) + | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + + at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + + if (data->bus_width_16) + mode = AT91_SMC_DBW_16; + else + mode = AT91_SMC_DBW_8; + at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2)); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + nand_data = *data; + platform_device_register(&at91sam9263_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_TWI, + .end = AT91SAM9263_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_TWI, + .end = AT91SAM9263_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_twi_device = { + .name = "at91_i2c", + .id = -1, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), +}; + +void __init at91_add_device_i2c(void) +{ + /* pins used for TWI interface */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + platform_device_register(&at91sam9263_twi_device); +} +#else +void __init at91_add_device_i2c(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = 0xffffffffUL; + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SPI0, + .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SPI0, + .end = AT91SAM9263_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SPI1, + .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SPI1, + .end = AT91SAM9263_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); + platform_device_register(&at91sam9263_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); + platform_device_register(&at91sam9263_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +u8 at91_leds_cpu; +u8 at91_leds_timer; + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_ATMEL) + +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static struct platform_device at91sam9263_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .platform_data = &dbgu_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_US0, + .end = AT91SAM9263_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_US0, + .end = AT91SAM9263_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9263_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .platform_data = &uart0_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(void) +{ + at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ + at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ + at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_US1, + .end = AT91SAM9263_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_US1, + .end = AT91SAM9263_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9263_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .platform_data = &uart1_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(void) +{ + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_US2, + .end = AT91SAM9263_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_US2, + .end = AT91SAM9263_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91sam9263_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .platform_data = &uart2_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(void) +{ + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ +} + +struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_init_serial(struct at91_uart_config *config) +{ + int i; + + /* Fill in list of supported UARTs */ + for (i = 0; i < config->nr_tty; i++) { + switch (config->tty_map[i]) { + case 0: + configure_usart0_pins(); + at91_uarts[i] = &at91sam9263_uart0_device; + at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); + break; + case 1: + configure_usart1_pins(); + at91_uarts[i] = &at91sam9263_uart1_device; + at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); + break; + case 2: + configure_usart2_pins(); + at91_uarts[i] = &at91sam9263_uart2_device; + at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); + break; + case 3: + configure_dbgu_pins(); + at91_uarts[i] = &at91sam9263_dbgu_device; + at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart"); + break; + default: + continue; + } + at91_uarts[i]->id = i; /* update ID number to mapped ID */ + } + + /* Set serial console device */ + if (config->console_tty < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 99df5f6..a4dded2 100644 --- a/arch/arm/mach-at91rm9200/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c + * linux/arch/arm/mach-at91/at91sam926x_time.c * * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France @@ -30,7 +30,6 @@ * Returns number of microseconds since last timer interrupt. Note that interrupts * will have been disabled by do_gettimeofday() * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy (linux/timex.h). */ static unsigned long at91sam926x_gettimeoffset(void) { @@ -39,7 +38,7 @@ static unsigned long at91sam926x_gettimeoffset(void) elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ - return (unsigned long)(elapsed * 1000000) / LATCH; + return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH; } /* diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 971c3e2..2d3d4b6 100644 --- a/arch/arm/mach-at91rm9200/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-1arm.c + * linux/arch/arm/mach-at91/board-1arm.c * * Copyright (C) 2005 SAN People * diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 654f037..b451861 100644 --- a/arch/arm/mach-at91rm9200/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-carmeva.c + * linux/arch/arm/mach-at91/board-carmeva.c * * Copyright (c) 2005 Peer Georgi * Conitec Datasystems @@ -134,7 +134,7 @@ static void __init carmeva_board_init(void) /* Compact Flash */ // at91_add_device_cf(&carmeva_cf_data); /* MMC */ - at91_add_device_mmc(&carmeva_mmc_data); + at91_add_device_mmc(0, &carmeva_mmc_data); } MACHINE_START(CARMEVA, "Carmeva") diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index b8bb805..e18a41e 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-csb337.c + * linux/arch/arm/mach-at91/board-csb337.c * * Copyright (C) 2005 SAN People * @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -112,6 +113,42 @@ static struct spi_board_info csb337_spi_devices[] = { }, }; +#define CSB_FLASH_BASE AT91_CHIPSELECT_0 +#define CSB_FLASH_SIZE 0x800000 + +static struct mtd_partition csb_flash_partitions[] = { + { + .name = "uMON flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, /* read only */ + } +}; + +static struct physmap_flash_data csb_flash_data = { + .width = 2, + .parts = csb_flash_partitions, + .nr_parts = ARRAY_SIZE(csb_flash_partitions), +}; + +static struct resource csb_flash_resources[] = { + { + .start = CSB_FLASH_BASE, + .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device csb_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &csb_flash_data, + }, + .resource = csb_flash_resources, + .num_resources = ARRAY_SIZE(csb_flash_resources), +}; + static void __init csb337_board_init(void) { /* Serial */ @@ -130,7 +167,9 @@ static void __init csb337_board_init(void) /* SPI */ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ - at91_add_device_mmc(&csb337_mmc_data); + at91_add_device_mmc(0, &csb337_mmc_data); + /* NOR flash */ + platform_device_register(&csb_flash); } MACHINE_START(CSB337, "Cogent CSB337") diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index a29fa0e8..77f04b9 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-csb637.c + * linux/arch/arm/mach-at91/board-csb637.c * * Copyright (C) 2005 SAN People * @@ -23,6 +23,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/mtd/physmap.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -81,6 +82,42 @@ static struct at91_udc_data __initdata csb637_udc_data = { .pullup_pin = AT91_PIN_PB1, }; +#define CSB_FLASH_BASE AT91_CHIPSELECT_0 +#define CSB_FLASH_SIZE 0x1000000 + +static struct mtd_partition csb_flash_partitions[] = { + { + .name = "uMON flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, /* read only */ + } +}; + +static struct physmap_flash_data csb_flash_data = { + .width = 2, + .parts = csb_flash_partitions, + .nr_parts = ARRAY_SIZE(csb_flash_partitions), +}; + +static struct resource csb_flash_resources[] = { + { + .start = CSB_FLASH_BASE, + .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device csb_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &csb_flash_data, + }, + .resource = csb_flash_resources, + .num_resources = ARRAY_SIZE(csb_flash_resources), +}; + static void __init csb637_board_init(void) { /* Serial */ @@ -95,6 +132,8 @@ static void __init csb637_board_init(void) at91_add_device_i2c(); /* SPI */ at91_add_device_spi(NULL, 0); + /* NOR flash */ + platform_device_register(&csb_flash); } MACHINE_START(CSB637, "Cogent CSB637") diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91/board-dk.c index 7522bf9..6043c38 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-dk.c + * linux/arch/arm/mach-at91/board-dk.c * * Copyright (C) 2005 SAN People * @@ -194,7 +194,7 @@ static void __init dk_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(&dk_mmc_data); + at91_add_device_mmc(0, &dk_mmc_data); #endif /* NAND */ at91_add_device_nand(&dk_nand_data); diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 80b72cf..20458b5 100644 --- a/arch/arm/mach-at91rm9200/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-eb9200.c + * linux/arch/arm/mach-at91/board-eb9200.c * * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest * by Andrew Patrikalakis @@ -109,7 +109,7 @@ static void __init eb9200_board_init(void) at91_add_device_spi(NULL, 0); /* MMC */ /* only supports 1 or 4 bit interface, not wired through to SPI */ - at91_add_device_mmc(&eb9200_mmc_data); + at91_add_device_mmc(0, &eb9200_mmc_data); } MACHINE_START(ATEB9200, "Embest ATEB9200") diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91/board-ek.c index c4fdb41..322fdd7 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-ek.c + * linux/arch/arm/mach-at91/board-ek.c * * Copyright (C) 2005 SAN People * @@ -154,7 +154,7 @@ static void __init ek_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(&ek_mmc_data); + at91_add_device_mmc(0, &ek_mmc_data); #endif /* NOR Flash */ platform_device_register(&ek_flash); diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 6ef3c48..c77d84c 100644 --- a/arch/arm/mach-at91rm9200/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-kafa.c + * linux/arch/arm/mach-at91/board-kafa.c * * Copyright (C) 2006 Sperry-Sun * diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 759d819..76f6e1e 100644 --- a/arch/arm/mach-at91rm9200/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-kb9202.c + * linux/arch/arm/mach-at91/board-kb9202.c * * Copyright (c) 2005 kb_admin * KwikByte, Inc. @@ -122,7 +122,7 @@ static void __init kb9202_board_init(void) /* USB Device */ at91_add_device_udc(&kb9202_udc_data); /* MMC */ - at91_add_device_mmc(&kb9202_mmc_data); + at91_add_device_mmc(0, &kb9202_mmc_data); /* I2C */ at91_add_device_i2c(); /* SPI */ diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index da5d58a..57fb449 100644 --- a/arch/arm/mach-at91rm9200/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-ek.c + * linux/arch/arm/mach-at91/board-sam9260ek.c * * Copyright (C) 2005 SAN People * Copyright (C) 2006 Atmel @@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = { /* * MACB Ethernet device */ -static struct __initdata eth_platform_data ek_macb_data = { +static struct __initdata at91_eth_data ek_macb_data = { .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; @@ -187,7 +187,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(&ek_mmc_data); + at91_add_device_mmc(0, &ek_mmc_data); } MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 30b490d..b7e7724 100644 --- a/arch/arm/mach-at91rm9200/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/board-ek.c + * linux/arch/arm/mach-at91/board-sam9261ek.c * * Copyright (C) 2005 SAN People * Copyright (C) 2006 Atmel @@ -243,7 +243,7 @@ static void __init ek_board_init(void) at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); #else /* MMC */ - at91_add_device_mmc(&ek_mmc_data); + at91_add_device_mmc(0, &ek_mmc_data); #endif } diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c new file mode 100644 index 0000000..8fdce11 --- /dev/null +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -0,0 +1,176 @@ +/* + * linux/arch/arm/mach-at91/board-sam9263ek.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + + +/* + * Serial port configuration. + * 0 .. 2 = USART0 .. USART2 + * 3 = DBGU + */ +static struct at91_uart_config __initdata ek_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */ +}; + +static void __init ek_map_io(void) +{ + /* Initialize processor: 16.367 MHz crystal */ + at91sam9263_initialize(16367660); + + /* Setup the serial ports and console */ + at91_init_serial(&ek_uart_config); +} + +static void __init ek_init_irq(void) +{ + at91sam9263_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, + .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PA25, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * SPI devices. + */ +static struct spi_board_info ek_spi_devices[] = { +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .wire4 = 1, + .det_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, +// .vcc_pin = ... not connected +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Partition 1", + .offset = 0, + .size = 64 * 1024 * 1024, + }, + { + .name = "Partition 2", + .offset = 64 * 1024 * 1024, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +static struct at91_nand_data __initdata ek_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected + .rdy_pin = AT91_PIN_PA22, + .enable_pin = AT91_PIN_PD15, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* MMC */ + at91_add_device_mmc(1, &ek_mmc_data); + /* NAND */ + at91_add_device_nand(&ek_nand_data); +} + +MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") + /* Maintainer: Atmel */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91/clock.c index 36a8e4d..06c9a05 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/clock.c + * linux/arch/arm/mach-at91/clock.c * * Copyright (C) 2005 David Brownell * Copyright (C) 2005 Ivan Kokshaysky @@ -525,27 +525,6 @@ fail: return 0; } -/* - * Several unused clocks may be active. Turn them off. - */ -static void __init at91_periphclk_reset(void) -{ - unsigned long reg; - struct clk *clk; - - reg = at91_sys_read(AT91_PMC_PCSR); - - list_for_each_entry(clk, &clocks, node) { - if (clk->mode != pmc_periph_mode) - continue; - - if (clk->users > 0) - reg &= ~clk->pmc_mask; - } - - at91_sys_write(AT91_PMC_PCDR, reg); -} - static struct clk *const standard_pmc_clocks[] __initdata = { /* four primary clocks */ &clk32k, @@ -586,7 +565,7 @@ int __init at91_clock_init(unsigned long main_clock) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); /* - * USB clock init: choose 48 MHz PLLB value, turn all clocks off, + * USB clock init: choose 48 MHz PLLB value, * disable 48MHz clock during usb peripheral suspend. * * REVISIT: assumes MCK doesn't derive from PLLB! @@ -596,16 +575,10 @@ int __init at91_clock_init(unsigned long main_clock) if (cpu_is_at91rm9200()) { uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP); at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260()) { + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; - at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP); - } else if (cpu_is_at91sam9261()) { - uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0); - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP); } at91_sys_write(AT91_CKGR_PLLBR, 0); @@ -634,11 +607,34 @@ int __init at91_clock_init(unsigned long main_clock) (unsigned) main_clock / 1000000, ((unsigned) main_clock % 1000000) / 1000); - /* disable all programmable clocks */ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); + return 0; +} + +/* + * Several unused clocks may be active. Turn them off. + */ +static int __init at91_clock_reset(void) +{ + unsigned long pcdr = 0; + unsigned long scdr = 0; + struct clk *clk; + + list_for_each_entry(clk, &clocks, node) { + if (clk->users > 0) + continue; + + if (clk->mode == pmc_periph_mode) + pcdr |= clk->pmc_mask; + + if (clk->mode == pmc_sys_mode) + scdr |= clk->pmc_mask; + + pr_debug("Clocks: disable unused %s\n", clk->name); + } - /* disable all other unused peripheral clocks */ - at91_periphclk_reset(); + at91_sys_write(AT91_PMC_PCDR, pcdr); + at91_sys_write(AT91_PMC_SCDR, scdr); return 0; } +late_initcall(at91_clock_reset); diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91/clock.h index b5c7a2e..1ba3b95 100644 --- a/arch/arm/mach-at91rm9200/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/clock.h + * linux/arch/arm/mach-at91/clock.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91/generic.h index 8c4d5a7..bda2622 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/generic.h + * linux/arch/arm/mach-at91/generic.h * * Copyright (C) 2005 David Brownell * @@ -12,11 +12,13 @@ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); +extern void __init at91sam9263_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); extern void __init at91sam9260_init_interrupts(unsigned int priority[]); extern void __init at91sam9261_init_interrupts(unsigned int priority[]); +extern void __init at91sam9263_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91/gpio.c index 15eb5b6..7b87f3f 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/gpio.c + * linux/arch/arm/mach-at91/gpio.c * * Copyright (C) 2005 HP Labs * diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91/irq.c index 2148daaf..78a5cdb 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91rm9200/irq.c + * linux/arch/arm/mach-at91/irq.c * * Copyright (C) 2004 SAN People * Copyright (C) 2004 ATMEL diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91/leds.c index 1a33373..0d51449 100644 --- a/arch/arm/mach-at91rm9200/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -86,10 +86,6 @@ static int __init leds_init(void) if (!at91_leds_timer || !at91_leds_cpu) return -ENODEV; - /* Enable PIO to access the LEDs */ - at91_set_gpio_output(at91_leds_timer, 1); - at91_set_gpio_output(at91_leds_cpu, 1); - leds_event = at91_leds_event; leds_event(led_start); diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91/pm.c index 67aa557..b49bfda 100644 --- a/arch/arm/mach-at91rm9200/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-at91rm9200/pm.c + * arch/arm/mach-at91/pm.c * AT91 Power Management * * Copyright (C) 2005 David Brownell @@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void) #warning "Check SAM9260 USB clocks" } else if (cpu_is_at91sam9261()) { #warning "Check SAM9261 USB clocks" + } else if (cpu_is_at91sam9263()) { +#warning "Check SAM9263 USB clocks" } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index af7904b..575a21d 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -51,6 +51,31 @@ config MACH_GESBC9312 Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. +config MACH_MICRO9 + bool + default n + +config MACH_MICRO9H + bool "Support Contec Hypercontrol Micro9-H" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-H board. + +config MACH_MICRO9M + bool "Support Contec Hypercontrol Micro9-M" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-M board. + +config MACH_MICRO9L + bool "Support Contec Hypercontrol Micro9-L" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-L board. + config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" help diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index b06641d..0d3bf93 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -13,4 +13,5 @@ obj-$(CONFIG_MACH_EDB9312) += edb9312.o obj-$(CONFIG_MACH_EDB9315) += edb9315.o obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o +obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 08ad782..f174d1a 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/module.h> #include <linux/string.h> #include <asm/div64.h> #include <asm/hardware.h> @@ -124,7 +125,7 @@ static unsigned long calc_pll_rate(u32 config_word) return (unsigned long)rate; } -void ep93xx_clock_init(void) +static int __init ep93xx_clock_init(void) { u32 value; @@ -153,4 +154,7 @@ void ep93xx_clock_init(void) printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", clk_f.rate / 1000000, clk_h.rate / 1000000, clk_p.rate / 1000000); + + return 0; } +arch_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6b26346..829aed6 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -152,22 +152,30 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * GPIO handling for EP93xx *************************************************************************/ -static unsigned char gpio_int_enable[2]; -static unsigned char gpio_int_type1[2]; -static unsigned char gpio_int_type2[2]; +static unsigned char gpio_int_unmasked[3]; +static unsigned char gpio_int_enabled[3]; +static unsigned char gpio_int_type1[3]; +static unsigned char gpio_int_type2[3]; -static void update_gpio_ab_int_params(int port) +static void update_gpio_int_params(int abf) { - if (port == 0) { + if (abf == 0) { __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); - __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE); - } else if (port == 1) { + __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE); + } else if (abf == 1) { __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); - __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE); + __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE); + } else if (abf == 2) { + __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE); + __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2); + __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1); + __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE); + } else { + BUG(); } } @@ -192,8 +200,13 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { if (line >= 0 && line < 16) { - gpio_int_enable[line >> 3] &= ~(1 << (line & 7)); - update_gpio_ab_int_params(line >> 3); + /* Port A/B. */ + gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); + update_gpio_int_params(line >> 3); + } else if (line >= 40 && line < 48) { + /* Port F. */ + gpio_int_unmasked[2] &= ~(1 << (line & 7)); + update_gpio_int_params(2); } v = __raw_readb(data_direction_register); @@ -244,8 +257,7 @@ EXPORT_SYMBOL(gpio_line_set); /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, - struct irq_desc *desc) +static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned char status; int i; @@ -267,37 +279,46 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, } } -static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq) +static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4); + + desc_handle_irq(gpio_irq, irq_desc + gpio_irq); +} + +static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { int line = irq - IRQ_EP93XX_GPIO(0); int port = line >> 3; - gpio_int_enable[port] &= ~(1 << (line & 7)); - update_gpio_ab_int_params(port); + gpio_int_unmasked[port] &= ~(1 << (line & 7)); + update_gpio_int_params(port); - if (line >> 3) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); - } else { + if (port == 0) { __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); + } else if (port == 1) { + __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); + } else if (port == 2) { + __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK); } } -static void ep93xx_gpio_ab_irq_mask(unsigned int irq) +static void ep93xx_gpio_irq_mask(unsigned int irq) { int line = irq - IRQ_EP93XX_GPIO(0); int port = line >> 3; - gpio_int_enable[port] &= ~(1 << (line & 7)); - update_gpio_ab_int_params(port); + gpio_int_unmasked[port] &= ~(1 << (line & 7)); + update_gpio_int_params(port); } -static void ep93xx_gpio_ab_irq_unmask(unsigned int irq) +static void ep93xx_gpio_irq_unmask(unsigned int irq) { int line = irq - IRQ_EP93XX_GPIO(0); int port = line >> 3; - gpio_int_enable[port] |= 1 << (line & 7); - update_gpio_ab_int_params(port); + gpio_int_unmasked[port] |= 1 << (line & 7); + update_gpio_int_params(port); } @@ -306,40 +327,51 @@ static void ep93xx_gpio_ab_irq_unmask(unsigned int irq) * edge (1) triggered, while gpio_int_type2 controls whether it * triggers on low/falling (0) or high/rising (1). */ -static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type) +static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { int port; int line; line = irq - IRQ_EP93XX_GPIO(0); - gpio_line_config(line, GPIO_IN); + if (line >= 0 && line < 16) { + gpio_line_config(line, GPIO_IN); + } else { + gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN); + } port = line >> 3; line &= 7; if (type & IRQT_RISING) { + gpio_int_enabled[port] |= 1 << line; gpio_int_type1[port] |= 1 << line; gpio_int_type2[port] |= 1 << line; } else if (type & IRQT_FALLING) { + gpio_int_enabled[port] |= 1 << line; gpio_int_type1[port] |= 1 << line; gpio_int_type2[port] &= ~(1 << line); } else if (type & IRQT_HIGH) { + gpio_int_enabled[port] |= 1 << line; gpio_int_type1[port] &= ~(1 << line); gpio_int_type2[port] |= 1 << line; } else if (type & IRQT_LOW) { + gpio_int_enabled[port] |= 1 << line; gpio_int_type1[port] &= ~(1 << line); gpio_int_type2[port] &= ~(1 << line); + } else { + gpio_int_enabled[port] &= ~(1 << line); } - update_gpio_ab_int_params(port); + update_gpio_int_params(port); return 0; } -static struct irq_chip ep93xx_gpio_ab_irq_chip = { - .ack = ep93xx_gpio_ab_irq_mask_ack, - .mask = ep93xx_gpio_ab_irq_mask, - .unmask = ep93xx_gpio_ab_irq_unmask, - .set_type = ep93xx_gpio_ab_irq_type, +static struct irq_chip ep93xx_gpio_irq_chip = { + .name = "GPIO", + .ack = ep93xx_gpio_irq_mask_ack, + .mask = ep93xx_gpio_irq_mask, + .unmask = ep93xx_gpio_irq_unmask, + .set_type = ep93xx_gpio_irq_type, }; @@ -350,12 +382,21 @@ void __init ep93xx_init_irq(void) vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); - for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) { - set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip); + for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) { + set_irq_chip(irq, &ep93xx_gpio_irq_chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } + set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler); + set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler); } @@ -461,8 +502,6 @@ void __init ep93xx_init_devices(void) { unsigned int v; - ep93xx_clock_init(); - /* * Disallow access to MaverickCrunch initially. */ @@ -477,8 +516,4 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); - -#ifdef CONFIG_CRUNCH - elf_hwcap |= HWCAP_CRUNCH; -#endif } diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c new file mode 100644 index 0000000..f28c129 --- /dev/null +++ b/arch/arm/mach-ep93xx/micro9.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-ep93xx/micro9.c + * + * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH + * Manfred Gruber <manfred.gruber@contec.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/sched.h> + +#include <linux/mtd/physmap.h> + +#include <asm/io.h> +#include <asm/hardware.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + +static struct resource micro9_eth_resource[] = { + { + .start = EP93XX_ETHERNET_PHYS_BASE, + .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_ETHERNET, + .end = IRQ_EP93XX_ETHERNET, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device micro9_eth_device = { + .name = "ep93xx-eth", + .id = -1, + .dev = { + .platform_data = µ9_eth_data, + }, + .num_resources = ARRAY_SIZE(micro9_eth_resource), + .resource = micro9_eth_resource, +}; + +static void __init micro9_eth_init(void) +{ + memcpy(micro9_eth_data.dev_addr, + (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); + platform_device_register(µ9_eth_device); +} + +static void __init micro9_init(void) +{ + micro9_eth_init(); +} + +/* + * Micro9-H + */ +#ifdef CONFIG_MACH_MICRO9H +static struct physmap_flash_data micro9h_flash_data = { + .width = 4, +}; + +static struct resource micro9h_flash_resource = { + .start = 0x10000000, + .end = 0x13ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device micro9h_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = µ9h_flash_data, + }, + .num_resources = 1, + .resource = µ9h_flash_resource, +}; + +static void __init micro9h_init(void) +{ + platform_device_register(µ9h_flash); +} + +static void __init micro9h_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); + micro9h_init(); +} + +MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") + /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9h_init_machine, +MACHINE_END +#endif + +/* + * Micro9-M + */ +#ifdef CONFIG_MACH_MICRO9M +static void __init micro9m_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); +} + +MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") + /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9m_init_machine, +MACHINE_END +#endif + +/* + * Micro9-L + */ +#ifdef CONFIG_MACH_MICRO9L +static void __init micro9l_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); +} + +MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") + /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9l_init_machine, +MACHINE_END +#endif + diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index dbbc07c..162b932 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -250,11 +250,14 @@ static struct irq_chip iop13xx_irqchip4 = { .unmask = iop13xx_irq_unmask3, }; +extern void iop_init_cp6_handler(void); + void __init iop13xx_init_irq(void) { unsigned int i; u32 cp_flags = iop13xx_cp6_save(); + iop_init_cp6_handler(); /* disable all interrupts */ write_intctl_0(0); diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index 3ec1cd5..8b0ac55 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -60,6 +60,8 @@ void __init iop32x_init_irq(void) { int i; + iop_init_cp6_handler(); + intctl_write(0); intstr_write(0); if (machine_is_glantank() || diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2499a77..966aa51 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -120,6 +120,20 @@ static struct hw_pci n2100_pci __initdata = { .map_irq = n2100_pci_map_irq, }; +/* + * Both r8169 chips on the n2100 exhibit PCI parity problems. Set + * the ->broken_parity_status flag for both ports so that the r8169 + * driver knows it should ignore error interrupts. + */ +static void n2100_fixup_r8169(struct pci_dev *dev) +{ + if (dev->bus->number == 0 && + (dev->devfn == PCI_DEVFN(1, 0) || + dev->devfn == PCI_DEVFN(2, 0))) + dev->broken_parity_status = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169); + static int __init n2100_pci_init(void) { if (machine_is_n2100()) diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index 00b37f3..effbe6b 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -110,6 +110,8 @@ void __init iop33x_init_irq(void) { int i; + iop_init_cp6_handler(); + intctl0_write(0); intctl1_write(0); intstr0_write(0); diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index e316bd9..8a339cd 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -17,7 +17,7 @@ config MACH_NSLU2 NSLU2 NAS device. For more information on this platform, see http://www.nslu2-linux.org -config ARCH_AVILA +config MACH_AVILA bool "Avila" select PCI help @@ -25,6 +25,14 @@ config ARCH_AVILA Avila Network Platform. For more information on this platform, see <file:Documentation/arm/IXP4xx>. +config MACH_LOFT + bool "Loft" + depends on MACH_AVILA + help + Say 'Y' here if you want your kernel to support the Giant + Shoulder Inc Loft board (a minor variation on the standard + Gateworks Avila Network Platform). + config ARCH_ADI_COYOTE bool "Coyote" select PCI @@ -86,7 +94,7 @@ config MACH_NAS100D # config ARCH_IXDP4XX bool - depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465 + depends on ARCH_IXDP425 || MACH_IXDP465 default y # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 640315d..746e297 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -6,6 +6,7 @@ obj-pci-y := obj-pci-n := obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o +obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o @@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-y += common.o obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o +obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c new file mode 100644 index 0000000..3f86769 --- /dev/null +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-ixp4xx/avila-pci.c + * + * Gateworks Avila board-level PCI initialization + * + * Author: Michael-Luke Jones <mlj28@cam.ac.uk> + * + * Based on ixdp-pci.c + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/delay.h> + +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +void __init avila_pci_preinit(void) +{ + set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[AVILA_PCI_IRQ_LINES] = { + IRQ_AVILA_PCI_INTA, + IRQ_AVILA_PCI_INTB, + IRQ_AVILA_PCI_INTC, + IRQ_AVILA_PCI_INTD + }; + + int irq = -1; + + if (slot >= 1 && + slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) && + pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) { + irq = pci_irq_table[(slot + pin - 2) % 4]; + } + + return irq; +} + +struct hw_pci avila_pci __initdata = { + .nr_controllers = 1, + .preinit = avila_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = avila_map_irq, +}; + +int __init avila_pci_init(void) +{ + if (machine_is_avila() || machine_is_loft()) + pci_common_init(&avila_pci); + return 0; +} + +subsys_initcall(avila_pci_init); + diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c new file mode 100644 index 0000000..d59b8dc --- /dev/null +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -0,0 +1,192 @@ +/* + * arch/arm/mach-ixp4xx/avila-setup.c + * + * Gateworks Avila board-setup + * + * Author: Michael-Luke Jones <mlj28@cam.ac.uk> + * + * Based on ixdp-setup.c + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_8250.h> +#include <linux/slab.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data avila_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource avila_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device avila_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &avila_flash_data, + }, + .num_resources = 1, + .resource = &avila_flash_resource, +}; + +static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = { + .sda_pin = AVILA_SDA_PIN, + .scl_pin = AVILA_SCL_PIN, +}; + +static struct platform_device avila_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev = { + .platform_data = &avila_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct resource avila_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port avila_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device avila_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = avila_uart_data, + .num_resources = 2, + .resource = avila_uart_resources +}; + +static struct resource avila_pata_resources[] = { + { + .flags = IORESOURCE_MEM + }, + { + .flags = IORESOURCE_MEM, + }, + { + .name = "intrq", + .start = IRQ_IXP4XX_GPIO12, + .end = IRQ_IXP4XX_GPIO12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ixp4xx_pata_data avila_pata_data = { + .cs0_bits = 0xbfff0043, + .cs1_bits = 0xbfff0043, +}; + +static struct platform_device avila_pata = { + .name = "pata_ixp4xx_cf", + .id = 0, + .dev.platform_data = &avila_pata_data, + .num_resources = ARRAY_SIZE(avila_pata_resources), + .resource = avila_pata_resources, +}; + +static struct platform_device *avila_devices[] __initdata = { + &avila_i2c_controller, + &avila_flash, + &avila_uart +}; + +static void __init avila_init(void) +{ + ixp4xx_sys_init(); + + avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + avila_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices)); + + avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); + avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1); + + avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2); + + avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1; + avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2; + + platform_device_register(&avila_pata); + +} + +MACHINE_START(AVILA, "Gateworks Avila Network Platform") + /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = avila_init, +MACHINE_END + + /* + * Loft is functionally equivalent to Avila except that it has a + * different number for the maximum PCI devices. The MACHINE + * structure below is identical to Avila except for the comment. + */ +#ifdef CONFIG_MACH_LOFT +MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") + /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = avila_init, +MACHINE_END +#endif + diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index d5156c0..99c1dc8 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = { int __init ixdp425_pci_init(void) { if (machine_is_ixdp425() || machine_is_ixcdp1100() || - machine_is_avila() || machine_is_ixdp465()) + machine_is_ixdp465()) pci_common_init(&ixdp425_pci); return 0; } diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index da72383..04b1d56 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -156,23 +156,3 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .init_machine = ixdp425_init, MACHINE_END #endif - -/* - * Avila is functionally equivalent to IXDP425 except that it adds - * a CF IDE slot hanging off the expansion bus. When we have a - * driver for IXP4xx CF IDE with driver model support we'll move - * Avila to it's own setup file. - */ -#ifdef CONFIG_ARCH_AVILA -MACHINE_START(AVILA, "Gateworks Avila Network Platform") - /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .boot_params = 0x0100, - .init_machine = ixdp425_init, -MACHINE_END -#endif - diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig new file mode 100644 index 0000000..8175ba9 --- /dev/null +++ b/arch/arm/mach-ns9xxx/Kconfig @@ -0,0 +1,21 @@ +if ARCH_NS9XXX + +menu "NS9xxx Implementations" + +config MACH_CC9P9360DEV + bool "Connect Core 9P 9360 on an A9M9750 Devboard" + select PROCESSOR_NS9360 + select BOARD_A9M9750DEV + help + Say Y here if you are using the Digi Connect Core 9P 9360 + on an A9M9750 Development Board. + +config PROCESSOR_NS9360 + bool + +config BOARD_A9M9750DEV + bool + +endmenu + +endif diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile new file mode 100644 index 0000000..91e945f --- /dev/null +++ b/arch/arm/mach-ns9xxx/Makefile @@ -0,0 +1,5 @@ +obj-y := irq.o time.o generic.o + +obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o + +obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot new file mode 100644 index 0000000..75ed64e --- /dev/null +++ b/arch/arm/mach-ns9xxx/Makefile.boot @@ -0,0 +1,2 @@ +zreladdr-y := 0x108000 +params_phys-y := 0x100 diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c new file mode 100644 index 0000000..2528988 --- /dev/null +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -0,0 +1,199 @@ +/* + * arch/arm/mach-ns9xxx/board-a9m9750dev.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/irq.h> + +#include <asm/mach/map.h> + +#include <asm/arch-ns9xxx/board.h> +#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-mem.h> +#include <asm/arch-ns9xxx/regs-bbu.h> +#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> + +#include "board-a9m9750dev.h" + +static struct map_desc board_a9m9750dev_io_desc[] __initdata = { + { /* FPGA on CS0 */ + .virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)), + .pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)), + .length = NS9XXX_CS0STAT_LENGTH, + .type = MT_DEVICE, + }, +}; + +void __init board_a9m9750dev_map_io(void) +{ + iotable_init(board_a9m9750dev_io_desc, + ARRAY_SIZE(board_a9m9750dev_io_desc)); +} + +static void a9m9750dev_fpga_ack_irq(unsigned int irq) +{ + /* nothing */ +} + +static void a9m9750dev_fpga_mask_irq(unsigned int irq) +{ + FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0))); +} + +static void a9m9750dev_fpga_maskack_irq(unsigned int irq) +{ + a9m9750dev_fpga_mask_irq(irq); + a9m9750dev_fpga_ack_irq(irq); +} + +static void a9m9750dev_fpga_unmask_irq(unsigned int irq) +{ + FPGA_IER |= 1 << (irq - FPGA_IRQ(0)); +} + +static struct irq_chip a9m9750dev_fpga_chip = { + .ack = a9m9750dev_fpga_ack_irq, + .mask = a9m9750dev_fpga_mask_irq, + .mask_ack = a9m9750dev_fpga_maskack_irq, + .unmask = a9m9750dev_fpga_unmask_irq, +}; + +static void a9m9750dev_fpga_demux_handler(unsigned int irq, + struct irq_desc *desc) +{ + int stat = FPGA_ISR; + + while (stat != 0) { + int irqno = fls(stat) - 1; + + stat &= ~(1 << irqno); + + desc = irq_desc + FPGA_IRQ(irqno); + + desc_handle_irq(irqno, desc); + } +} + +void __init board_a9m9750dev_init_irq(void) +{ + u32 reg; + int i; + + /* + * configure gpio for IRQ_EXT2 + * use GPIO 11, because GPIO 32 is used for the LCD + */ + /* XXX: proper GPIO handling */ + BBU_GC(2) &= ~0x2000; + + for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { + set_irq_chip(i, &a9m9750dev_fpga_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + /* IRQ_EXT2: level sensitive + active low */ + reg = SYS_EIC(2); + REGSET(reg, SYS_EIC, PLTY, AL); + REGSET(reg, SYS_EIC, LVEDG, LEVEL); + SYS_EIC(2) = reg; + + set_irq_chained_handler(IRQ_EXT2, + a9m9750dev_fpga_demux_handler); +} + +static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = { + { + .iobase = FPGA_UARTA_BASE, + .membase = (unsigned char*)FPGA_UARTA_BASE, + .mapbase = FPGA_UARTA_BASE, + .irq = IRQ_FPGA_UARTA, + .iotype = UPIO_MEM, + .uartclk = 18432000, + .regshift = 0, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, + }, { + .iobase = FPGA_UARTB_BASE, + .membase = (unsigned char*)FPGA_UARTB_BASE, + .mapbase = FPGA_UARTB_BASE, + .irq = IRQ_FPGA_UARTB, + .iotype = UPIO_MEM, + .uartclk = 18432000, + .regshift = 0, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, + }, { + .iobase = FPGA_UARTC_BASE, + .membase = (unsigned char*)FPGA_UARTC_BASE, + .mapbase = FPGA_UARTC_BASE, + .irq = IRQ_FPGA_UARTC, + .iotype = UPIO_MEM, + .uartclk = 18432000, + .regshift = 0, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, + }, { + .iobase = FPGA_UARTD_BASE, + .membase = (unsigned char*)FPGA_UARTD_BASE, + .mapbase = FPGA_UARTD_BASE, + .irq = IRQ_FPGA_UARTD, + .iotype = UPIO_MEM, + .uartclk = 18432000, + .regshift = 0, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, + }, { + /* end marker */ + }, +}; + +static struct platform_device board_a9m9750dev_serial_device = { + .name = "serial8250", + .dev = { + .platform_data = board_a9m9750dev_serial8250_port, + }, +}; + +static struct platform_device *board_a9m9750dev_devices[] __initdata = { + &board_a9m9750dev_serial_device, +}; + +void __init board_a9m9750dev_init_machine(void) +{ + u32 reg; + + /* setup static CS0: memory base ... */ + REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB, + NS9XXX_CSxSTAT_PHYS(0) >> 12); + + /* ... and mask */ + reg = SYS_SMCSSMM(0); + REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff); + REGSET(reg, SYS_SMCSSMM, CSEx, EN); + SYS_SMCSSMM(0) = reg; + + /* setup static CS0: memory configuration */ + reg = MEM_SMC(0); + REGSET(reg, MEM_SMC, WSMC, OFF); + REGSET(reg, MEM_SMC, BSMC, OFF); + REGSET(reg, MEM_SMC, EW, OFF); + REGSET(reg, MEM_SMC, PB, 1); + REGSET(reg, MEM_SMC, PC, AL); + REGSET(reg, MEM_SMC, PM, DIS); + REGSET(reg, MEM_SMC, MW, 8); + MEM_SMC(0) = reg; + + /* setup static CS0: timing */ + MEM_SMWED(0) = 0x2; + MEM_SMOED(0) = 0x2; + MEM_SMRD(0) = 0x6; + MEM_SMWD(0) = 0x6; + + platform_add_devices(board_a9m9750dev_devices, + ARRAY_SIZE(board_a9m9750dev_devices)); +} + diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.h b/arch/arm/mach-ns9xxx/board-a9m9750dev.h new file mode 100644 index 0000000..edc75ab --- /dev/null +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-ns9xxx/board-a9m9750dev.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/init.h> + +void __init board_a9m9750dev_map_io(void); +void __init board_a9m9750dev_init_machine(void); +void __init board_a9m9750dev_init_irq(void); diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c new file mode 100644 index 0000000..83e2b65 --- /dev/null +++ b/arch/arm/mach-ns9xxx/generic.c @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-ns9xxx/generic.c + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/memory.h> +#include <asm/page.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-mem.h> +#include <asm/arch-ns9xxx/board.h> + +static struct map_desc standard_io_desc[] __initdata = { + { /* BBus */ + .virtual = io_p2v(0x90000000), + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00700000, + .type = MT_DEVICE, + }, { /* AHB */ + .virtual = io_p2v(0xa0100000), + .pfn = __phys_to_pfn(0xa0100000), + .length = 0x00900000, + .type = MT_DEVICE, + }, +}; + +void __init ns9xxx_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} + +void __init ns9xxx_init_machine(void) +{ +} diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h new file mode 100644 index 0000000..687e2917 --- /dev/null +++ b/arch/arm/mach-ns9xxx/generic.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-ns9xxx/generic.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/time.h> +#include <asm/mach/time.h> +#include <linux/init.h> + +void __init ns9xxx_init_irq(void); +void __init ns9xxx_map_io(void); +void __init ns9xxx_init_machine(void); + +extern struct sys_timer ns9xxx_timer; diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c new file mode 100644 index 0000000..83d9272 --- /dev/null +++ b/arch/arm/mach-ns9xxx/irq.c @@ -0,0 +1,94 @@ +/* + * arch/arm/mach-ns9xxx/irq.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/interrupt.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> +#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/irqs.h> +#include <asm/arch-ns9xxx/board.h> + +#include "generic.h" + +static void ns9xxx_ack_irq_timer(unsigned int irq) +{ + u32 tc = SYS_TC(irq - IRQ_TIMER0); + + REGSET(tc, SYS_TCx, INTC, SET); + SYS_TC(irq - IRQ_TIMER0) = tc; + + REGSET(tc, SYS_TCx, INTC, UNSET); + SYS_TC(irq - IRQ_TIMER0) = tc; +} + +void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = { + [IRQ_TIMER0] = ns9xxx_ack_irq_timer, + [IRQ_TIMER1] = ns9xxx_ack_irq_timer, + [IRQ_TIMER2] = ns9xxx_ack_irq_timer, + [IRQ_TIMER3] = ns9xxx_ack_irq_timer, +}; + +static void ns9xxx_mask_irq(unsigned int irq) +{ + /* XXX: better use cpp symbols */ + SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3)))); +} + +static void ns9xxx_ack_irq(unsigned int irq) +{ + if (!ns9xxx_ack_irq_functions[irq]) { + printk(KERN_ERR "no ack function for irq %u\n", irq); + BUG(); + } + + ns9xxx_ack_irq_functions[irq](irq); + SYS_ISRADDR = 0; +} + +static void ns9xxx_maskack_irq(unsigned int irq) +{ + ns9xxx_mask_irq(irq); + ns9xxx_ack_irq(irq); +} + +static void ns9xxx_unmask_irq(unsigned int irq) +{ + /* XXX: better use cpp symbols */ + SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3))); +} + +static struct irq_chip ns9xxx_chip = { + .ack = ns9xxx_ack_irq, + .mask = ns9xxx_mask_irq, + .mask_ack = ns9xxx_maskack_irq, + .unmask = ns9xxx_unmask_irq, +}; + +void __init ns9xxx_init_irq(void) +{ + int i; + + /* disable all IRQs */ + for (i = 0; i < 8; ++i) + SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 | + (4 * i + 2) << 8 | (4 * i + 3); + + /* simple interrupt prio table: + * prio(x) < prio(y) <=> x < y + */ + for (i = 0; i < 32; ++i) + SYS_IVA(i) = i; + + for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) { + set_irq_chip(i, &ns9xxx_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } +} diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c new file mode 100644 index 0000000..a193dd9 --- /dev/null +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include "board-a9m9750dev.h" +#include "generic.h" + +static void __init mach_cc9p9360dev_map_io(void) +{ + ns9xxx_map_io(); + board_a9m9750dev_map_io(); +} + +static void __init mach_cc9p9360dev_init_irq(void) +{ + ns9xxx_init_irq(); + board_a9m9750dev_init_irq(); +} + +static void __init mach_cc9p9360dev_init_machine(void) +{ + ns9xxx_init_machine(); + board_a9m9750dev_init_machine(); +} + +MACHINE_START(CC9P9360DEV, "Connect Core 9P 9360 on an A9M9750 Devboard") + .map_io = mach_cc9p9360dev_map_io, + .init_irq = mach_cc9p9360dev_init_irq, + .init_machine = mach_cc9p9360dev_init_machine, + .timer = &ns9xxx_timer, + .boot_params = 0x100, +MACHINE_END diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c new file mode 100644 index 0000000..eec05f1 --- /dev/null +++ b/arch/arm/mach-ns9xxx/time.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-ns9xxx/time.c + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/clock.h> +#include <asm/arch-ns9xxx/irqs.h> +#include <asm/arch/system.h> +#include "generic.h" + +#define TIMERCLOCKSELECT 64 + +static u32 usecs_per_tick; + +static irqreturn_t +ns9xxx_timer_interrupt(int irq, void *dev_id) +{ + write_seqlock(&xtime_lock); + timer_tick(); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static unsigned long ns9xxx_timer_gettimeoffset(void) +{ + /* return the microseconds which have passed since the last interrupt + * was _serviced_. That is, if an interrupt is pending or the counter + * reloads, return one periode more. */ + + u32 counter1 = SYS_TR(0); + int pending = SYS_ISR & (1 << IRQ_TIMER0); + u32 counter2 = SYS_TR(0); + u32 elapsed; + + if (pending || counter2 > counter1) + elapsed = 2 * SYS_TRC(0) - counter2; + else + elapsed = SYS_TRC(0) - counter1; + + return (elapsed * usecs_per_tick) >> 16; + +} + +static struct irqaction ns9xxx_timer_irq = { + .name = "NS9xxx Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = ns9xxx_timer_interrupt, +}; + +static void __init ns9xxx_timer_init(void) +{ + int tc; + + usecs_per_tick = + SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16); + + /* disable timer */ + if ((tc = SYS_TC(0)) & SYS_TCx_TEN) + SYS_TC(0) = tc & ~SYS_TCx_TEN; + + SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0); + + REGSET(tc, SYS_TCx, TEN, EN); + REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */ + REGSET(tc, SYS_TCx, INTS, EN); + REGSET(tc, SYS_TCx, UDS, DOWN); + REGSET(tc, SYS_TCx, TDBG, STOP); + REGSET(tc, SYS_TCx, TSZ, 32); + REGSET(tc, SYS_TCx, REN, EN); + SYS_TC(0) = tc; + + setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq); +} + +struct sys_timer ns9xxx_timer = { + .init = ns9xxx_timer_init, + .offset = ns9xxx_timer_gettimeoffset, +}; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 9de1278..390524c 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -338,6 +338,27 @@ static struct platform_device i2c_device = { .num_resources = ARRAY_SIZE(i2c_resources), }; +#ifdef CONFIG_PXA27x +static struct resource i2c_power_resources[] = { + { + .start = 0x40f00180, + .end = 0x40f001a3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PWRI2C, + .end = IRQ_PWRI2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_power_device = { + .name = "pxa2xx-i2c", + .id = 1, + .resource = i2c_power_resources, + .num_resources = ARRAY_SIZE(i2c_resources), +}; +#endif + void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) { i2c_device.dev.platform_data = info; @@ -392,6 +413,9 @@ static struct platform_device *devices[] __initdata = { &stuart_device, &pxaficp_device, &i2c_device, +#ifdef CONFIG_PXA27x + &i2c_power_device, +#endif &i2s_device, &pxartc_device, }; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 17f5f44..35156ca 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -10,10 +10,21 @@ config MACH_REALVIEW_EB config REALVIEW_MPCORE bool "Support MPcore tile" depends on MACH_REALVIEW_EB + select CACHE_L2X0 help Enable support for the MPCore tile on the Realview platform. Since there are device address and interrupt differences, a kernel built with this option enabled is not compatible with other tiles. +config REALVIEW_MPCORE_REVB + bool "Support MPcore RevB tile" + depends on REALVIEW_MPCORE + default n + help + Enable support for the MPCore RevB tile on the Realview platform. + Since there are device address differences, a + kernel built with this option enabled is not compatible with + other tiles. + endmenu diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index b8484e1..fce3596 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -52,13 +52,14 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); + gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE)); /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ pen_release = -1; + smp_wmb(); /* * Synchronise with the boot thread. @@ -102,6 +103,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { + smp_rmb(); if (pen_release == -1) break; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 9741b4d..3dba666 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -31,6 +31,7 @@ #include <asm/mach-types.h> #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -57,7 +58,26 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, + }, +#ifdef CONFIG_REALVIEW_MPCORE + { + .virtual = IO_ADDRESS(REALVIEW_GIC1_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC1_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_GIC1_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC1_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, }, { + .virtual = IO_ADDRESS(REALVIEW_MPCORE_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_MPCORE_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + }, +#endif + { .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), .length = SZ_4K, @@ -138,19 +158,29 @@ static void __init gic_init_irq(void) #ifdef CONFIG_REALVIEW_MPCORE unsigned int pldctrl; writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); - pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + 0xd8); + pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1); pldctrl |= 0x00800000; /* New irq mode */ - writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8); + writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1); writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); #endif - gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); - gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); + gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE)); +#ifdef CONFIG_REALVIEW_MPCORE + gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64); + gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE)); + gic_cascade_irq(1, IRQ_EB_IRQ1); +#endif } static void __init realview_eb_init(void) { int i; +#ifdef CONFIG_REALVIEW_MPCORE + /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled + * Bits: .... ...0 0111 1001 0000 .... .... .... */ + l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff); +#endif clk_register(&realview_clcd_clk); platform_device_register(&realview_flash_device); diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig new file mode 100644 index 0000000..deab072 --- /dev/null +++ b/arch/arm/mach-s3c2400/Kconfig @@ -0,0 +1,13 @@ +# arch/arm/mach-s3c2400/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + + + +menu "S3C2400 Machines" + + +endmenu + diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile new file mode 100644 index 0000000..7e23f4e --- /dev/null +++ b/arch/arm/mach-s3c2400/Makefile @@ -0,0 +1,15 @@ +# arch/arm/mach-s3c2400/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2400) += gpio.o + +# Machine support + diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2400/gpio.c index 1576d01..758e160 100644 --- a/arch/arm/mach-s3c2410/s3c2400-gpio.c +++ b/arch/arm/mach-s3c2400/gpio.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c +/* linux/arch/arm/mach-s3c2400/gpio.c * * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> * diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index eb4ec41..d4b013b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -1,54 +1,51 @@ -if ARCH_S3C2410 +# arch/arm/mach-s3c2410/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 -menu "S3C24XX Implementations" +config CPU_S3C2410 + bool + depends on ARCH_S3C2410 + select S3C2410_CLOCK + select S3C2410_GPIO + select S3C2410_PM if PM + help + Support for S3C2410 and S3C2410A family from the S3C24XX line + of Samsung Mobile CPUs. -config MACH_AML_M5900 - bool "AML M5900 Series" - select CPU_S3C2410 - select PM_SIMTEC if PM +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 help - Say Y here if you are using the American Microsystems M5900 Series - <http://www.amltd.com> + DMA device selection for S3C2410 and compatible CPUs -config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 - select PM_SIMTEC if PM +config S3C2410_PM + bool help - Say Y here if you are using the Simtec Electronics ANUBIS - development system + Power Management code common to S3C2410 and better -config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 - select PM_SIMTEC if PM +config S3C2410_GPIO + bool help - Say Y here if you are using the Simtec IM2440D20 module, also - known as the Osiris. + GPIO code for S3C2410 and similar processors -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select CPU_S3C2410 - select PM_SIMTEC if PM - select ISA +config S3C2410_CLOCK + bool help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) + Clock code for the S3C2410, and similar processors - Product page: <http://www.simtec.co.uk/products/EB2410ITX/>. -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) +menu "S3C2410 Machines" -config PM_H1940 - bool +config ARCH_SMDK2410 + bool "SMDK2410/A9M2410" + select CPU_S3C2410 + select MACH_SMDK help - Internal node for H1940 and related PM + Say Y here if you are using the SMDK2410 or the derived module A9M2410 + <http://www.fsforth.de> config ARCH_H1940 bool "IPAQ H1940" @@ -57,7 +54,10 @@ config ARCH_H1940 help Say Y here if you are using the HP IPAQ H1940 - <http://www.handhelds.org/projects/h1940.html>. +config PM_H1940 + bool + help + Internal node for H1940 and related PM config MACH_N30 bool "Acer N30" @@ -65,53 +65,36 @@ config MACH_N30 help Say Y here if you are using the Acer N30 - <http://zoo.weinigel.se/n30>. - -config MACH_SMDK - bool - help - Common machine code for SMDK2410 and SMDK2440 - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" +config ARCH_BAST + bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 - select MACH_SMDK + select PM_SIMTEC if PM + select ISA help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - <http://www.fsforth.de> + Say Y here if you are using the Simtec Electronics EB2410ITX + development board (also known as BAST) -config ARCH_S3C2440 - bool "SMDK2440" - select CPU_S3C2440 - select MACH_SMDK +config MACH_OTOM + bool "NexVision OTOM Board" + select CPU_S3C2410 help - Say Y here if you are using the SMDK2440. - -config SMDK2440_CPU2440 - bool "SMDK2440 with S3C2440 CPU module" - depends on ARCH_S3C2440 - default y if ARCH_S3C2440 - select CPU_S3C2440 - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - depends on ARCH_S3C2440 - select CPU_S3C2442 + Say Y here if you are using the Nex Vision OTOM board -config MACH_S3C2413 - bool +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + select PM_SIMTEC if PM help - Internal node for S3C2413 version of SMDK2413, so that - machine_is_s3c2413() will work when MACH_SMDK2413 is - selected + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> -config MACH_SMDK2413 - bool "SMDK2413" - select CPU_S3C2412 - select MACH_S3C2413 - select MACH_SMDK +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y help - Say Y here if you are using an SMDK2413 + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) config MACH_VR1000 bool "Thorcom VR1000" @@ -120,202 +103,11 @@ config MACH_VR1000 help Say Y here if you are using the Thorcom VR1000 board. - This linux port is currently being maintained by Simtec, on behalf - of Thorcom. Any queries, please contact Thorcom first. - -config MACH_RX3715 - bool "HP iPAQ rx3715" - select CPU_S3C2440 - select PM_H1940 if PM - help - Say Y here if you are using the HP iPAQ rx3715. - - See <http://www.handhelds.org/projects/rx3715.html> for more - information on this project - -config MACH_OTOM - bool "NexVision OTOM Board" - select CPU_S3C2410 - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_NEXCODER_2440 - bool "NexVision NEXCODER 2440 Light Board" - select CPU_S3C2440 - help - Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board - -config MACH_VSTMS - bool "VMSTMS" - select CPU_S3C2412 +config MACH_QT2410 + bool "QT2410" + select CPU_S3C2410 help - Say Y here if you are using an VSTMS board + Say Y here if you are using the Armzone QT2410 endmenu -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config CPU_S3C2410_DMA - bool - depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 - help - DMA device selection for S3C2410 and compatible CPUs - -config CPU_S3C2410 - bool - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_PM if PM - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -# internal node to signify if we are only dealing with an S3C2412 - -config CPU_S3C2412_ONLY - bool - depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 - default y if CPU_S3C2412 - -config S3C2412_PM - bool - help - Internal config node to apply S3C2412 power management - -config CPU_S3C2412 - bool - depends on ARCH_S3C2410 - select S3C2412_PM if PM - help - Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line - -config CPU_S3C244X - bool - depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - -config CPU_S3C2440 - bool - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - help - Support for S3C2440 Samsung Mobile CPU based systems. - -config CPU_S3C2442 - bool - depends on ARCH_S3C2420 - select S3C2410_CLOCK - select S3C2410_PM if PM - select CPU_S3C244X - help - Support for S3C2442 Samsung Mobile CPU based systems. - -comment "S3C2410 Boot" - -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" - depends on ARCH_S3C2410 && S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - - Although this uses the same hardware unit as the kernel watchdog - driver, it is not a replacement for it. If you use this option, - you will have to use the watchdg driver to either stop the timeout - or restart it. If you do not, then your kernel will reboot after - startup. - - The driver uses a fixed timeout value, so the exact time till the - system resets depends on the value of PCLK. The timeout on an - 200MHz s3c2410 should be about 30 seconds. - -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" - depends on ARCH_S3C2410 - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - - -comment "S3C2410 Setup" - -config S3C2410_DMA - bool "S3C2410 DMA support" - depends on ARCH_S3C2410 - help - S3C2410 DMA support. This is needed for drivers like sound which - use the S3C2410's DMA system to move data to and from the - peripheral blocks. - -config S3C2410_DMA_DEBUG - bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA - help - Enable debugging output for the DMA code. This option sends info - to the kernel log, at priority KERN_DEBUG. - - Note, it is easy to create and fill the log buffer in a small - amount of time, as well as using an significant percentage of - the CPU time doing so. - - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on ARCH_S3C2410 && PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - for more information. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on ARCH_S3C2410 && PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - -config PM_SIMTEC - bool - help - Common power management code for systems that are - compatible with the Simtec style of power management - -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - - Note, this does not affect the port used by the debug messages, - which is a separate configuration. - -endif diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 27663e2..9a3d3d2 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -1,92 +1,31 @@ - +# arch/arm/mach-s3c2410/Makefile # -# Makefile for the linux kernel. +# Copyright 2007 Simtec Electronics # +# Licensed under GPLv2 -# Object file lists. - -obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o -obj-m := -obj-n := -obj- := -obj-dma-y := -obj-dma-n := - -# DMA -obj-$(CONFIG_S3C2410_DMA) += dma.o - -# S3C2400 support files -obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o - -# S3C2410 support files +obj-y := +obj-m := +obj-n := +obj- := obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o - -obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o -obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o - -# Power Management support - -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o - -# S3C2412 support -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o -obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o - -obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o - -# -# S3C244X support - -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o - -# Clock control - -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o - -# S3C2440 support - -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o -obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o -obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o +obj-$(CONFIG_CPU_S3C2410) += irq.o +obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o +obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o +obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2410_GPIO) += gpio.o +obj-$(CONFIG_S3C2410_CLOCK) += clock.o -# S3C2442 support +# Machine support -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o - -# bast extras - -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o - -# merge in dma objects - -obj-y += $(obj-dma-y) - -# machine specific support - -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o -obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o +obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_PM_H1940) += pm-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o -obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o -obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o - -obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o +obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 379efe7..daeba42 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -39,7 +39,7 @@ #include <asm/arch/bast-map.h> #include <asm/arch/bast-irq.h> -#include "irq.h" +#include <asm/plat-s3c24xx/irq.h> #if 0 #include <asm/debug-ll.h> diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h index e5d0331..e985437 100644 --- a/arch/arm/mach-s3c2410/bast.h +++ b/arch/arm/mach-s3c2410/bast.h @@ -1,2 +1,2 @@ - +/* linux/arch/arm/mach-s3c2410/bast.h extern void bast_init_irq(void); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index e13fb67..5b4831c 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -1,15 +1,9 @@ /* linux/arch/arm/mach-s3c2410/clock.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX Core clock control support - * - * Based on, and code from linux/arch/arm/mach-versatile/clock.c - ** - ** Copyright (C) 2004 ARM Limited. - ** Written by Deep Blue Solutions Limited. - * + * S3C2410,S3C2440,S3C2442 Clock control support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,418 +26,251 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/platform_device.h> #include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/mach/map.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/io.h> +#include <asm/arch/regs-serial.h> #include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> -#include "clock.h" -#include "cpu.h" - -/* clock information */ +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> -static LIST_HEAD(clocks); - -DEFINE_MUTEX(clocks_mutex); - -/* enable and disable calls for use with the clk struct */ - -static int clk_null_enable(struct clk *clk, int enable) +int s3c2410_clkcon_enable(struct clk *clk, int enable) { - return 0; -} - -/* Clock API calls */ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p; - struct clk *clk = ERR_PTR(-ENOENT); - int idno; + clkcon = __raw_readl(S3C2410_CLKCON); - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; + if (enable) + clkcon |= clocks; else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, list) { - if (p->id == idno && - strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - - /* check for the case where a device was supplied, but the - * clock that was being searched for is not device specific */ - - if (IS_ERR(clk)) { - list_for_each_entry(p, &clocks, list) { - if (p->id == -1 && strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - } + clkcon &= ~clocks; - mutex_unlock(&clocks_mutex); - return clk; -} + /* ensure none of the special function bits set */ + clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); -void clk_put(struct clk *clk) -{ - module_put(clk->owner); -} + __raw_writel(clkcon, S3C2410_CLKCON); -int clk_enable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return -EINVAL; - - clk_enable(clk->parent); - - mutex_lock(&clocks_mutex); - - if ((clk->usage++) == 0) - (clk->enable)(clk, 1); - - mutex_unlock(&clocks_mutex); return 0; } -void clk_disable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return; - - mutex_lock(&clocks_mutex); - - if ((--clk->usage) == 0) - (clk->enable)(clk, 0); - - mutex_unlock(&clocks_mutex); - clk_disable(clk->parent); -} - - -unsigned long clk_get_rate(struct clk *clk) -{ - if (IS_ERR(clk)) - return 0; - - if (clk->rate != 0) - return clk->rate; - - if (clk->get_rate != NULL) - return (clk->get_rate)(clk); - - if (clk->parent != NULL) - return clk_get_rate(clk->parent); - - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (!IS_ERR(clk) && clk->round_rate) - return (clk->round_rate)(clk, rate); - - return rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret; - - if (IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = (clk->set_rate)(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} - -struct clk *clk_get_parent(struct clk *clk) +static int s3c2410_upll_enable(struct clk *clk, int enable) { - return clk->parent; -} - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = 0; - - if (IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - - if (clk->set_parent) - ret = (clk->set_parent)(clk, parent); - - mutex_unlock(&clocks_mutex); - - return ret; -} - -EXPORT_SYMBOL(clk_get); -EXPORT_SYMBOL(clk_put); -EXPORT_SYMBOL(clk_enable); -EXPORT_SYMBOL(clk_disable); -EXPORT_SYMBOL(clk_get_rate); -EXPORT_SYMBOL(clk_round_rate); -EXPORT_SYMBOL(clk_set_rate); -EXPORT_SYMBOL(clk_get_parent); -EXPORT_SYMBOL(clk_set_parent); - -/* base clocks */ - -struct clk clk_xtal = { - .name = "xtal", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_mpll = { - .name = "mpll", - .id = -1, -}; - -struct clk clk_upll = { - .name = "upll", - .id = -1, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_f = { - .name = "fclk", - .id = -1, - .rate = 0, - .parent = &clk_mpll, - .ctrlbit = 0, -}; - -struct clk clk_h = { - .name = "hclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_p = { - .name = "pclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_usb_bus = { - .name = "usb-bus", - .id = -1, - .rate = 0, - .parent = &clk_upll, -}; - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long orig = clkslow; if (enable) - dclkcon |= clk->ctrlbit; + clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; else - dclkcon &= ~clk->ctrlbit; + clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - __raw_writel(dclkcon, S3C24XX_DCLKCON); + __raw_writel(clkslow, S3C2410_CLKSLOW); - return 0; -} + /* if we started the UPLL, then allow to settle */ -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); + if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) + udelay(200); return 0; } - -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_xtal) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_dclk0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_NAND, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SPI, } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, }; -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, +static struct clk init_clocks[] = { + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus, + }, { + .name = "usb-bus-gadget", + .id = -1, + .parent = &clk_usb_bus, + }, }; -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_uclk = { - .name = "uclk", - .id = -1, -}; - -/* initialise the clock system */ - -int s3c24xx_register_clock(struct clk *clk) -{ - clk->owner = THIS_MODULE; - - if (clk->enable == NULL) - clk->enable = clk_null_enable; - - /* add to the list of available clocks */ - - mutex_lock(&clocks_mutex); - list_add(&clk->list, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - -/* initalise all the clocks */ +/* s3c2410_baseclk_add() + * + * Add all the clocks used by the s3c2410 or compatible CPUs + * such as the S3C2440 and S3C2442. + * + * We cannot use a system device as we are needed before any + * of the init-calls that initialise the devices are actually + * done. +*/ -int __init s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk) +int __init s3c2410_baseclk_add(void) { - printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + struct clk *clkp; + struct clk *xtal; + int ret; + int ptr; - /* initialise the main system clocks */ + clk_upll.enable = s3c2410_upll_enable; - clk_xtal.rate = xtal; - clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); + if (s3c24xx_register_clock(&clk_usb_bus) < 0) + printk(KERN_ERR "failed to register usb bus clock\n"); - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; + /* register clocks from clock array */ - /* assume uart clocks are correctly setup */ + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + /* ensure that we note the clock state */ - /* register our clocks */ + clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - if (s3c24xx_register_clock(&clk_xtal) < 0) - printk(KERN_ERR "failed to register master xtal\n"); + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } - if (s3c24xx_register_clock(&clk_mpll) < 0) - printk(KERN_ERR "failed to register mpll clock\n"); + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } - if (s3c24xx_register_clock(&clk_upll) < 0) - printk(KERN_ERR "failed to register upll clock\n"); + s3c2410_clkcon_enable(clkp, 0); + } - if (s3c24xx_register_clock(&clk_f) < 0) - printk(KERN_ERR "failed to register cpu fclk\n"); + /* show the clock-slow value */ - if (s3c24xx_register_clock(&clk_h) < 0) - printk(KERN_ERR "failed to register cpu hclk\n"); + xtal = clk_get(NULL, "xtal"); - if (s3c24xx_register_clock(&clk_p) < 0) - printk(KERN_ERR "failed to register cpu pclk\n"); + printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", + print_mhz(clk_get_rate(xtal) / + ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), + (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", + (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", + (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); return 0; } diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index fa860e7..67d1ad3 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/dma.c * - * Copyright (c) 2003-2005,2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 DMA core + * S3C2410 DMA selection * * http://armlinux.simtec.co.uk/ * @@ -12,1430 +12,170 @@ * published by the Free Software Foundation. */ - -#ifdef CONFIG_S3C2410_DMA_DEBUG -#define DEBUG -#endif - -#include <linux/module.h> +#include <linux/kernel.h> #include <linux/init.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/sysdev.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/delay.h> +#include <linux/serial_core.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/io.h> #include <asm/dma.h> - -#include <asm/mach/dma.h> -#include <asm/arch/map.h> - -#include "dma.h" - -/* io map for dma */ -static void __iomem *dma_base; -static struct kmem_cache *dma_kmem; - -struct s3c24xx_dma_selection dma_sel; - -/* dma channel state information */ -struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; - -/* debugging functions */ - -#define BUF_MAGIC (0xcafebabe) - -#define dmawarn(fmt...) printk(KERN_DEBUG fmt) - -#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) - -#if 1 -#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) -#else -static inline void -dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) -{ - pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); - writel(val, dma_regaddr(chan, reg)); -} -#endif - -#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) - -/* captured register state for debug */ - -struct s3c2410_dma_regstate { - unsigned long dcsrc; - unsigned long disrc; - unsigned long dstat; - unsigned long dcon; - unsigned long dmsktrig; +#include <asm/arch/dma.h> + +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/dma.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, }; -#ifdef CONFIG_S3C2410_DMA_DEBUG - -/* dmadbg_showregs - * - * simple debug routine to print the current state of the dma registers -*/ - -static void -dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) -{ - regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); - regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); - regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); - regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); - regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); -} - -static void -dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, - struct s3c2410_dma_regstate *regs) -{ - printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", - chan->number, fname, line, - regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, - regs->dcon); -} - -static void -dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - - printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", - chan->number, fname, line, chan->load_state, - chan->curr, chan->next, chan->end); - - dmadbg_dumpregs(fname, line, chan, &state); -} - -static void -dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - dmadbg_dumpregs(fname, line, chan, &state); -} - -#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) -#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan)) -#else -#define dbg_showregs(chan) do { } while(0) -#define dbg_showchan(chan) do { } while(0) -#endif /* CONFIG_S3C2410_DMA_DEBUG */ - -static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; - -/* lookup_dma_channel - * - * change the dma channel number given into a real dma channel id -*/ - -static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) -{ - if (channel & DMACH_LOW_LEVEL) - return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; - else - return dma_chan_map[channel]; -} - -/* s3c2410_dma_stats_timeout - * - * Update DMA stats from timeout info -*/ - -static void -s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) { - if (stats == NULL) - return; - - if (val > stats->timeout_longest) - stats->timeout_longest = val; - if (val < stats->timeout_shortest) - stats->timeout_shortest = val; - - stats->timeout_avg += val; + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; } -/* s3c2410_dma_waitforload - * - * wait for the DMA engine to load a buffer, and update the state accordingly -*/ - -static int -s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) -{ - int timeout = chan->load_timeout; - int took; - - if (chan->load_state != S3C2410_DMALOAD_1LOADED) { - printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); - return 0; - } - - if (chan->stats != NULL) - chan->stats->loads++; - - while (--timeout > 0) { - if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { - took = chan->load_timeout - timeout; - - s3c2410_dma_stats_timeout(chan->stats, took); - - switch (chan->load_state) { - case S3C2410_DMALOAD_1LOADED: - chan->load_state = S3C2410_DMALOAD_1RUNNING; - break; - - default: - printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); - } - - return 1; - } - } - - if (chan->stats != NULL) { - chan->stats->timeout_failed++; - } - - return 0; -} - - - -/* s3c2410_dma_loadbuffer - * - * load a buffer, and update the channel state -*/ - -static inline int -s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, - struct s3c2410_dma_buf *buf) -{ - unsigned long reload; - - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - - if (buf == NULL) { - dmawarn("buffer is NULL\n"); - return -EINVAL; - } - - /* check the state of the channel before we do anything */ - - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); - } - - if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { - dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); - } - - /* it would seem sensible if we are the last buffer to not bother - * with the auto-reload bit, so that the DMA engine will not try - * and load another transfer after this one has finished... - */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("load_state is none, checking for noreload (next=%p)\n", - buf->next); - reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; - } else { - //pr_debug("load_state is %d => autoreload\n", chan->load_state); - reload = S3C2410_DCON_AUTORELOAD; - } - - if ((buf->data & 0xf0000000) != 0x30000000) { - dmawarn("dmaload: buffer is %p\n", (void *)buf->data); - } - - writel(buf->data, chan->addr_reg); - - dma_wrreg(chan, S3C2410_DMA_DCON, - chan->dcon | reload | (buf->size/chan->xfer_unit)); - - chan->next = buf->next; - - /* update the state of the channel */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_1RUNNING: - chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; - break; - - default: - dmawarn("dmaload: unknown state %d in loadbuffer\n", - chan->load_state); - break; - } - - return 0; -} - -/* s3c2410_dma_call_op - * - * small routine to call the op routine with the given op if it has been - * registered -*/ - -static void -s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) -{ - if (chan->op_fn != NULL) { - (chan->op_fn)(chan, op); - } -} - -/* s3c2410_dma_buffdone - * - * small wrapper to check if callback routine needs to be called, and - * if so, call it -*/ - -static inline void -s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, - enum s3c2410_dma_buffresult result) -{ -#if 0 - pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", - chan->callback_fn, buf, buf->id, buf->size, result); -#endif - - if (chan->callback_fn != NULL) { - (chan->callback_fn)(chan, buf->id, buf->size, result); - } -} - -/* s3c2410_dma_start - * - * start a dma channel going -*/ - -static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) -{ - unsigned long tmp; - unsigned long flags; - - pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); - - local_irq_save(flags); - - if (chan->state == S3C2410_DMA_RUNNING) { - pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); - local_irq_restore(flags); - return 0; - } - - chan->state = S3C2410_DMA_RUNNING; - - /* check wether there is anything to load, and if not, see - * if we can find anything to load - */ - - if (chan->load_state == S3C2410_DMALOAD_NONE) { - if (chan->next == NULL) { - printk(KERN_ERR "dma%d: channel has nothing loaded\n", - chan->number); - chan->state = S3C2410_DMA_IDLE; - local_irq_restore(flags); - return -EINVAL; - } - - s3c2410_dma_loadbuffer(chan, chan->next); - } - - dbg_showchan(chan); - - /* enable the channel */ - - if (!chan->irq_enabled) { - enable_irq(chan->irq); - chan->irq_enabled = 1; - } - - /* start the channel going */ - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp &= ~S3C2410_DMASKTRIG_STOP; - tmp |= S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - - pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); - -#if 0 - /* the dma buffer loads should take care of clearing the AUTO - * reloading feature */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp &= ~S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; -} - -/* s3c2410_dma_canload - * - * work out if we can queue another buffer into the DMA engine -*/ - -static int -s3c2410_dma_canload(struct s3c2410_dma_chan *chan) -{ - if (chan->load_state == S3C2410_DMALOAD_NONE || - chan->load_state == S3C2410_DMALOAD_1RUNNING) - return 1; - - return 0; -} - -/* s3c2410_dma_enqueue - * - * queue an given buffer for dma transfer. - * - * id the device driver's id information for this buffer - * data the physical address of the buffer data - * size the size of the buffer in bytes - * - * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART - * is checked, and if set, the channel is started. If this flag isn't set, - * then an error will be returned. - * - * It is possible to queue more than one DMA buffer onto a channel at - * once, and the code will deal with the re-loading of the next buffer - * when necessary. -*/ - -int s3c2410_dma_enqueue(unsigned int channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - struct s3c2410_dma_buf *buf; - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: id=%p, data=%08x, size=%d\n", - __FUNCTION__, id, (unsigned int)data, size); - - buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); - if (buf == NULL) { - pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, (long)sizeof(*buf)); - return -ENOMEM; - } - - //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); - //dbg_showchan(chan); - - buf->next = NULL; - buf->data = buf->ptr = data; - buf->size = size; - buf->id = id; - buf->magic = BUF_MAGIC; - - local_irq_save(flags); - - if (chan->curr == NULL) { - /* we've got nothing loaded... */ - pr_debug("%s: buffer %p queued onto empty channel\n", - __FUNCTION__, buf); - - chan->curr = buf; - chan->end = buf; - chan->next = NULL; - } else { - pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", - chan->number, __FUNCTION__, buf); - - if (chan->end == NULL) - pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", - chan->number, __FUNCTION__, chan); - - chan->end->next = buf; - chan->end = buf; - } - - /* if necessary, update the next buffer field */ - if (chan->next == NULL) - chan->next = buf; - - /* check to see if we can load a buffer */ - if (chan->state == S3C2410_DMA_RUNNING) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - printk(KERN_ERR "dma%d: loadbuffer:" - "timeout loading buffer\n", - chan->number); - dbg_showchan(chan); - local_irq_restore(flags); - return -EINVAL; - } - } - - while (s3c2410_dma_canload(chan) && chan->next != NULL) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } else if (chan->state == S3C2410_DMA_IDLE) { - if (chan->flags & S3C2410_DMAF_AUTOSTART) { - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START); - } - } - - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - -static inline void -s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) -{ - int magicok = (buf->magic == BUF_MAGIC); - - buf->magic = -1; - - if (magicok) { - kmem_cache_free(dma_kmem, buf); - } else { - printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); - } -} - -/* s3c2410_dma_lastxfer - * - * called when the system is out of buffers, to ensure that the channel - * is prepared for shutdown. -*/ - -static inline void -s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) -{ -#if 0 - pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", - chan->number, chan->load_state); -#endif - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); - return; - } - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do - * until the next buffer comes along, and we turn off the - * reload */ - return; - - default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", - chan->number, chan->load_state); - return; - - } - - /* hopefully this'll shut the damned thing up after the transfer... */ - dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); -} - - -#define dmadbg2(x...) - -static irqreturn_t -s3c2410_dma_irq(int irq, void *devpw) -{ - struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; - struct s3c2410_dma_buf *buf; - - buf = chan->curr; - - dbg_showchan(chan); - - /* modify the channel state */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* TODO - if we are running only one buffer, we probably - * want to reload here, and then worry about the buffer - * callback */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED: - /* iirc, we should go back to NONE loaded here, we - * had a buffer, and it was never verified as being - * loaded. - */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* we'll worry about checking to see if another buffer is - * ready after we've called back the owner. This should - * ensure we do not wait around too long for the DMA - * engine to start the next transfer - */ - - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_NONE: - printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", - chan->number); - break; - - default: - printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", - chan->number, chan->load_state); - break; - } - - if (buf != NULL) { - /* update the chain to make sure that if we load any more - * buffers when we call the callback function, things should - * work properly */ - - chan->curr = buf->next; - buf->next = NULL; - - if (buf->magic != BUF_MAGIC) { - printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", - chan->number, __FUNCTION__, buf); - return IRQ_HANDLED; - } - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); - - /* free resouces */ - s3c2410_dma_freebuf(buf); - } else { - } - - /* only reload if the channel is still running... our buffer done - * routine may have altered the state by requesting the dma channel - * to stop or shutdown... */ - - /* todo: check that when the channel is shut-down from inside this - * function, we cope with unsetting reload, etc */ - - if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { - unsigned long flags; - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* don't need to do anything for this state */ - break; - - case S3C2410_DMALOAD_NONE: - /* can load buffer immediately */ - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); - return IRQ_HANDLED; - } - - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - goto no_load; - - default: - printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", - chan->number, chan->load_state); - return IRQ_HANDLED; - } - - local_irq_save(flags); - s3c2410_dma_loadbuffer(chan, chan->next); - local_irq_restore(flags); - } else { - s3c2410_dma_lastxfer(chan); - - /* see if we can stop this channel.. */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", - chan->number, jiffies); - s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, - S3C2410_DMAOP_STOP); - } - } - - no_load: - return IRQ_HANDLED; -} - -static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(unsigned int channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - int err; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c2410_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - - if (!chan->irq_claimed) { - pr_debug("dma%d: %s : requesting irq %d\n", - channel, __FUNCTION__, chan->irq); - - chan->irq_claimed = 1; - local_irq_restore(flags); - - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, - client->name, (void *)chan); - - local_irq_save(flags); - - if (err) { - chan->in_use = 0; - chan->irq_claimed = 0; - local_irq_restore(flags); - - printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", - client->name, chan->irq, chan->number); - return err; - } - - chan->irq_enabled = 1; - } - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_request); +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ +static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { + .channels = { + [DMACH_SDI] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + [2] = 0 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_IN] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + }, +}; -int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) +static int s3c2410_dma_add(struct sys_device *sysdev) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: need to stop dma channel %p\n", - __FUNCTION__, chan); - - /* possibly flush the channel */ - s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); - } - - chan->client = NULL; - chan->in_use = 0; - - if (chan->irq_claimed) - free_irq(chan->irq, (void *)chan); - - chan->irq_claimed = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; + s3c2410_dma_init(); + s3c24xx_dma_order_set(&s3c2410_dma_order); + return s3c24xx_dma_init_map(&s3c2410_dma_sel); } -EXPORT_SYMBOL(s3c2410_dma_free); - -static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - unsigned long tmp; - - pr_debug("%s:\n", __FUNCTION__); - - dbg_showchan(chan); - - local_irq_save(flags); - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp |= S3C2410_DMASKTRIG_STOP; - //tmp &= ~S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - /* should stop do this, or should we wait for flush? */ - chan->state = S3C2410_DMA_IDLE; - chan->load_state = S3C2410_DMALOAD_NONE; - - local_irq_restore(flags); - - return 0; -} +#if defined(CONFIG_CPU_S3C2410) +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; -void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) +static int __init s3c2410_dma_drvinit(void) { - unsigned long tmp; - unsigned int timeout = 0x10000; - - while (timeout-- > 0) { - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - - if (!(tmp & S3C2410_DMASKTRIG_ON)) - return; - } - - pr_debug("dma%d: failed to stop?\n", chan->number); + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); } - -/* s3c2410_dma_flush - * - * stop the channel, and remove all current and pending transfers -*/ - -static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_buf *buf, *next; - unsigned long flags; - - pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); - - dbg_showchan(chan); - - local_irq_save(flags); - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: stopping channel...\n", __FUNCTION__ ); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); - } - - buf = chan->curr; - if (buf == NULL) - buf = chan->next; - - chan->curr = chan->next = chan->end = NULL; - - if (buf != NULL) { - for ( ; buf != NULL; buf = next) { - next = buf->next; - - pr_debug("%s: free buffer %p, next %p\n", - __FUNCTION__, buf, buf->next); - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); - s3c2410_dma_freebuf(buf); - } - } - - dbg_showregs(chan); - - s3c2410_dma_waitforstop(chan); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - { - unsigned long tmp; - - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); - } +arch_initcall(s3c2410_dma_drvinit); #endif - dbg_showregs(chan); - - local_irq_restore(flags); - - return 0; -} - -int -s3c2410_dma_started(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - - local_irq_save(flags); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; - -} - -int -s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c2410_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c2410_dma_dostop(chan); - - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - return -ENOENT; - - case S3C2410_DMAOP_FLUSH: - return s3c2410_dma_flush(chan); - - case S3C2410_DMAOP_STARTED: - return s3c2410_dma_started(chan); - - case S3C2410_DMAOP_TIMEOUT: - return 0; - - } - - return -ENOENT; /* unknown, don't bother */ -} - -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* DMA configuration for each channel - * - * DISRCC -> source of the DMA (AHB,APB) - * DISRC -> source address of the DMA - * DIDSTC -> destination of the DMA (AHB,APD) - * DIDST -> destination address of the DMA -*/ - -/* s3c2410_dma_config - * - * xfersize: size of unit in bytes (1,2,4) - * dcon: base value of the DCONx register -*/ - -int s3c2410_dma_config(dmach_t channel, - int xferunit, - int dcon) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __FUNCTION__, channel, xferunit, dcon); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); - - dcon |= chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); - - switch (xferunit) { - case 1: - dcon |= S3C2410_DCON_BYTE; - break; - - case 2: - dcon |= S3C2410_DCON_HALFWORD; - break; - - case 4: - dcon |= S3C2410_DCON_WORD; - break; - - default: - pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit); - return -EINVAL; - } - - dcon |= S3C2410_DCON_HWTRIG; - dcon |= S3C2410_DCON_INTREQ; - - pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); - - chan->dcon = dcon; - chan->xfer_unit = xferunit; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_config); - -int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); - - chan->flags = flags; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_setflags); - - -/* do we need to protect the settings of the fields from - * irq? -*/ - -int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); - - chan->op_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_opfn); - -int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); - - chan->callback_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); - -/* s3c2410_dma_devconfig - * - * configure the dma source/destination hardware type and address - * - * source: S3C2410_DMASRC_HW: source is hardware - * S3C2410_DMASRC_MEM: source is memory - * - * hwcfg: the value for xxxSTCn register, - * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=soucre is AHB, 1=soucre is APB - * - * devaddr: physical address of the source -*/ - -int s3c2410_dma_devconfig(int channel, - enum s3c2410_dmasrc source, - int hwcfg, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __FUNCTION__, (int)source, hwcfg, devaddr); - - chan->source = source; - chan->dev_addr = devaddr; - - switch (source) { - case S3C2410_DMASRC_HW: - /* source is hardware */ - pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); - dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); - return 0; - - case S3C2410_DMASRC_MEM: - /* source is memory */ - pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); - dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); - return 0; - } - - printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); - return -EINVAL; -} - -EXPORT_SYMBOL(s3c2410_dma_devconfig); - -/* s3c2410_dma_getposition - * - * returns the current transfer points for the dma source and destination -*/ - -int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - if (src != NULL) - *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); - - if (dst != NULL) - *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_getposition); - - -/* system device class */ - -#ifdef CONFIG_PM - -static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) -{ - struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); - - printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); - - if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { - /* the dma channel is still working, which is probably - * a bad thing to do over suspend/resume. We stop the - * channel and assume that the client is either going to - * retry after resume, or that it is broken. - */ - - printk(KERN_INFO "dma: stopping channel %d due to suspend\n", - cp->number); - - s3c2410_dma_dostop(cp); - } - - return 0; -} - -static int s3c2410_dma_resume(struct sys_device *dev) -{ - return 0; -} - -#else -#define s3c2410_dma_suspend NULL -#define s3c2410_dma_resume NULL -#endif /* CONFIG_PM */ - -struct sysdev_class dma_sysclass = { - set_kset_name("s3c24xx-dma"), - .suspend = s3c2410_dma_suspend, - .resume = s3c2410_dma_resume, +#if defined(CONFIG_CPU_S3C2442) +/* S3C2442 DMA contains the same selection table as the S3C2410 */ +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, }; -/* kmem cache implementation */ - -static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f) -{ - memset(p, 0, sizeof(struct s3c2410_dma_buf)); -} - -/* initialisation code */ - -static int __init s3c2410_init_dma(void) -{ - struct s3c2410_dma_chan *cp; - int channel; - int ret; - - printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); - - dma_base = ioremap(S3C24XX_PA_DMA, 0x200); - if (dma_base == NULL) { - printk(KERN_ERR "dma failed to remap register block\n"); - return -ENOMEM; - } - - printk("Registering sysclass\n"); - - ret = sysdev_class_register(&dma_sysclass); - if (ret != 0) { - printk(KERN_ERR "dma sysclass registration failed\n"); - goto err; - } - - dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0, - SLAB_HWCACHE_ALIGN, - s3c2410_dma_cache_ctor, NULL); - - if (dma_kmem == NULL) { - printk(KERN_ERR "dma failed to make kmem cache\n"); - ret = -ENOMEM; - goto err; - } - - for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) { - cp = &s3c2410_chans[channel]; - - memset(cp, 0, sizeof(struct s3c2410_dma_chan)); - - /* dma channel irqs are in order.. */ - cp->number = channel; - cp->irq = channel + IRQ_DMA0; - cp->regs = dma_base + (channel*0x40); - - /* point current stats somewhere */ - cp->stats = &cp->stats_store; - cp->stats_store.timeout_shortest = LONG_MAX; - - /* basic channel configuration */ - - cp->load_timeout = 1<<18; - - /* register system device */ - - cp->dev.cls = &dma_sysclass; - cp->dev.id = channel; - ret = sysdev_register(&cp->dev); - - printk("DMA channel %d at %p, irq %d\n", - cp->number, cp->regs, cp->irq); - } - - return 0; - - err: - kmem_cache_destroy(dma_kmem); - iounmap(dma_base); - dma_base = NULL; - return ret; -} - -core_initcall(s3c2410_init_dma); - -static inline int is_channel_valid(unsigned int channel) +static int __init s3c2442_dma_drvinit(void) { - return (channel & DMA_CH_VALID); + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); } -/* s3c2410_dma_map_channel() - * - * turn the virtual channel number into a real, and un-used hardware - * channel. - * - * currently this code uses first-free channel from the specified harware - * map, not taking into account anything that the board setup code may - * have to say about the likely peripheral set to be in use. -*/ - -struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) -{ - struct s3c24xx_dma_map *ch_map; - struct s3c2410_dma_chan *dmach; - int ch; - - if (dma_sel.map == NULL || channel > dma_sel.map_size) - return NULL; - - ch_map = dma_sel.map + channel; - - for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { - if (!is_channel_valid(ch_map->channels[ch])) - continue; - - if (s3c2410_chans[ch].in_use == 0) { - printk("mapped channel %d to %d\n", channel, ch); - break; - } - } - - if (ch >= S3C2410_DMA_CHANNELS) - return NULL; - - /* update our channel mapping */ - - dmach = &s3c2410_chans[ch]; - dma_chan_map[channel] = dmach; - - /* select the channel */ - - (dma_sel.select)(dmach, ch_map); - - return dmach; -} - -static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) -{ - /* show the channel configuration */ - - printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, - (is_channel_valid(map->channels[0]) ? '0' : '-'), - (is_channel_valid(map->channels[1]) ? '1' : '-'), - (is_channel_valid(map->channels[2]) ? '2' : '-'), - (is_channel_valid(map->channels[3]) ? '3' : '-')); -} - -static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) -{ - if (1) - s3c24xx_dma_show_ch(map, ch); - - return 0; -} - -int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) -{ - struct s3c24xx_dma_map *nmap; - size_t map_sz = sizeof(*nmap) * sel->map_size; - int ptr; - - nmap = kmalloc(map_sz, GFP_KERNEL); - if (nmap == NULL) - return -ENOMEM; - - memcpy(nmap, sel->map, map_sz); - memcpy(&dma_sel, sel, sizeof(*sel)); - - dma_sel.map = nmap; - - for (ptr = 0; ptr < sel->map_size; ptr++) - s3c24xx_dma_check_entry(nmap+ptr, ptr); +arch_initcall(s3c2442_dma_drvinit); +#endif - return 0; -} diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index f6fb215..01e795d 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/gpio.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX GPIO support + * S3C2410 GPIO support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,8 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - + */ #include <linux/kernel.h> #include <linux/init.h> @@ -33,156 +32,40 @@ #include <asm/arch/regs-gpio.h> -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; - - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + void __iomem *reg = S3C24XX_EINFLT0; unsigned long flags; - unsigned long up; - - if (pin < S3C2410_GPIO_BANKB) - return; - - local_irq_save(flags); - - up = __raw_readl(base + 0x08); - up &= ~(1L << offs); - up |= to << offs; - __raw_writel(up, base + 0x08); + unsigned long val; - local_irq_restore(flags); -} + if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) + return -1; -EXPORT_SYMBOL(s3c2410_gpio_pullup); + config &= 0xff; -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long dat; + pin -= S3C2410_GPG8; + reg += pin & ~3; local_irq_save(flags); - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offs); - dat |= to << offs; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + /* update filter width and clock source */ - return __raw_readl(base + 0x04) & (1<< offs); -} + val = __raw_readl(reg); + val &= ~(0xff << ((pin & 3) * 8)); + val |= config << ((pin & 3) * 8); + __raw_writel(val, reg); -EXPORT_SYMBOL(s3c2410_gpio_getpin); + /* update filter enable */ -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; + val = __raw_readl(S3C24XX_EXTINT2); + val &= ~(1 << ((pin * 4) + 3)); + val |= on << ((pin * 4) + 3); + __raw_writel(val, S3C24XX_EXTINT2); - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); local_irq_restore(flags); - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) - return -1; /* not valid interrupts */ - - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ - - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; - - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; - - return (pin - S3C2410_GPG0) + IRQ_EINT8; + return 0; } -EXPORT_SYMBOL(s3c2410_gpio_getirq); +EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 3c0ed78..53cbdaa 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -17,37 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * Changelog: - * - * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> - * Fixed compile warnings - * - * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> - * Fixed s3c_extirq_type - * - * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> - * Addition of ADC/TC demux - * - * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> - * Fix for set_irq_type() on low EINT numbers - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Tidy up KF's patch and sort out new release - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Add support for power management controls - * - * 04-Nov-2004 Ben Dooks - * Fix standard IRQ wake for EINT0..4 and RTC - * - * 22-Feb-2005 Ben Dooks - * Fixed edge-triggering on ADC IRQ - * - * 28-Jun-2005 Ben Dooks - * Mark IRQ_LCD valid - * - * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to seperate file */ #include <linux/init.h> @@ -57,745 +26,23 @@ #include <linux/ptrace.h> #include <linux/sysdev.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/mach/irq.h> - -#include <asm/arch/regs-irq.h> -#include <asm/arch/regs-gpio.h> - -#include "cpu.h" -#include "pm.h" -#include "irq.h" - -/* wakeup irq control */ - -#ifdef CONFIG_PM - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; - -int -s3c_irq_wake(unsigned int irqno, unsigned int state) -{ - unsigned long irqbit = 1 << (irqno - IRQ_EINT0); - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static int -s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - -#else -#define s3c_irqext_wake NULL -#define s3c_irq_wake NULL -#endif - - -static void -s3c_irq_mask(unsigned int irqno) -{ - unsigned long mask; - - irqno -= IRQ_EINT0; - - mask = __raw_readl(S3C2410_INTMSK); - mask |= 1UL << irqno; - __raw_writel(mask, S3C2410_INTMSK); -} - -static inline void -s3c_irq_ack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c_irq_maskack(unsigned int irqno) -{ - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - - -static void -s3c_irq_unmask(unsigned int irqno) -{ - unsigned long mask; - - if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) - irqdbf2("s3c_irq_unmask %d\n", irqno); - - irqno -= IRQ_EINT0; - - mask = __raw_readl(S3C2410_INTMSK); - mask &= ~(1UL << irqno); - __raw_writel(mask, S3C2410_INTMSK); -} - -struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake -}; - -static struct irq_chip s3c_irq_chip = { - .name = "s3c", - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake -}; - -static void -s3c_irqext_mask(unsigned int irqno) -{ - unsigned long mask; - - irqno -= EXTINT_OFF; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask |= ( 1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -static void -s3c_irqext_ack(unsigned int irqno) -{ - unsigned long req; - unsigned long bit; - unsigned long mask; +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> - bit = 1UL << (irqno - EXTINT_OFF); - - mask = __raw_readl(S3C24XX_EINTMASK); - - __raw_writel(bit, S3C24XX_EINTPEND); - - req = __raw_readl(S3C24XX_EINTPEND); - req &= ~mask; - - /* not sure if we should be acking the parent irq... */ - - if (irqno <= IRQ_EINT7 ) { - if ((req & 0xf0) == 0) - s3c_irq_ack(IRQ_EINT4t7); - } else { - if ((req >> 8) == 0) - s3c_irq_ack(IRQ_EINT8t23); - } -} - -static void -s3c_irqext_unmask(unsigned int irqno) +static int s3c2410_irq_add(struct sys_device *sysdev) { - unsigned long mask; - - irqno -= EXTINT_OFF; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask &= ~( 1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -int -s3c_irqext_type(unsigned int irq, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - unsigned long newvalue = 0, value; - - if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3)) - { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (irq - IRQ_EINT0) * 2; - extint_offset = (irq - IRQ_EINT0) * 4; - } - else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7)) - { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (irq - (EXTINT_OFF)) * 2; - extint_offset = (irq - (EXTINT_OFF)) * 4; - } - else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15)) - { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (irq - IRQ_EINT8) * 2; - extint_offset = (irq - IRQ_EINT8) * 4; - } - else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23)) - { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (irq - IRQ_EINT8) * 2; - extint_offset = (irq - IRQ_EINT16) * 4; - } else - return -1; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQT_NOEDGE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQT_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQT_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQT_BOTHEDGE: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQT_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQT_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -1; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - return 0; } -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, -}; - -/* mask values for the parent registers for each of the interrupt types */ - -#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0)) -#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) -#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) -#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) - - -/* UART0 */ - -static void -s3c_irq_uart0_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART0, 7); -} - -static void -s3c_irq_uart0_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART0); -} - -static void -s3c_irq_uart0_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART0, 7); -} - -static struct irq_chip s3c_irq_uart0 = { - .name = "s3c-uart0", - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, -}; - -/* UART1 */ - -static void -s3c_irq_uart1_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3); -} - -static void -s3c_irq_uart1_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART1); -} - -static void -s3c_irq_uart1_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3); -} - -static struct irq_chip s3c_irq_uart1 = { - .name = "s3c-uart1", - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, -}; - -/* UART2 */ - -static void -s3c_irq_uart2_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6); -} - -static void -s3c_irq_uart2_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_UART2); -} - -static void -s3c_irq_uart2_ack(unsigned int irqno) -{ - s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6); -} - -static struct irq_chip s3c_irq_uart2 = { - .name = "s3c-uart2", - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, -}; - -/* ADC and Touchscreen */ - -static void -s3c_irq_adc_mask(unsigned int irqno) -{ - s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9); -} - -static void -s3c_irq_adc_unmask(unsigned int irqno) -{ - s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT); -} - -static void -s3c_irq_adc_ack(unsigned int irqno) -{ - s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9); -} - -static struct irq_chip s3c_irq_adc = { - .name = "s3c-adc", - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, -}; - -/* irq demux for adc */ -static void s3c_irq_demux_adc(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - unsigned int offset = 9; - struct irq_desc *mydesc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - mydesc = irq_desc + IRQ_TC; - desc_handle_irq(IRQ_TC, mydesc); - } - if (subsrc & 2) { - mydesc = irq_desc + IRQ_ADC; - desc_handle_irq(IRQ_ADC, mydesc); - } - } -} - -static void s3c_irq_demux_uart(unsigned int start) -{ - unsigned int subsrc, submsk; - unsigned int offset = start - IRQ_S3CUART_RX0; - struct irq_desc *desc; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n", - start, offset, subsrc, submsk); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 7; - - if (subsrc != 0) { - desc = irq_desc + start; - - if (subsrc & 1) - desc_handle_irq(start, desc); - - desc++; - - if (subsrc & 2) - desc_handle_irq(start+1, desc); - - desc++; - - if (subsrc & 4) - desc_handle_irq(start+2, desc); - } -} - -/* uart demux entry points */ - -static void -s3c_irq_demux_uart0(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX0); -} - -static void -s3c_irq_demux_uart1(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX1); -} - -static void -s3c_irq_demux_uart2(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX2); -} - -static void -s3c_irq_demux_extint8(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= ~0xff; /* ignore lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - desc_handle_irq(irq, irq_desc + irq); - } - -} - -static void -s3c_irq_demux_extint4t7(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= 0xff; /* only lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - - desc_handle_irq(irq, irq_desc + irq); - } -} - -#ifdef CONFIG_PM - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), +static struct sysdev_driver s3c2410_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +static int s3c2410_irq_init(void) { - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); } -int s3c24xx_irq_resume(struct sys_device *dev) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; -} - -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -void __init s3c24xx_init_irq(void) -{ - unsigned long pend; - unsigned long last; - int irqno; - int i; - - irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); - - /* first, clear all interrupts pending... */ - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C24XX_EINTPEND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C24XX_EINTPEND); - printk("irq: clearing pending ext status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_INTPND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C2410_SRCPND); - __raw_writel(pend, S3C2410_INTPND); - printk("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_SUBSRCPND); - - if (pend == 0 || pend == last) - break; - - printk("irq: clearing subpending status %08x\n", (int)pend); - __raw_writel(pend, S3C2410_SUBSRCPND); - last = pend; - } - - /* register the main interrupts */ - - irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); - - for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { - /* set all the s3c2410 internal irqs */ - - switch (irqno) { - /* deal with the special IRQs (cascaded) */ - - case IRQ_EINT4t7: - case IRQ_EINT8t23: - case IRQ_UART0: - case IRQ_UART1: - case IRQ_UART2: - case IRQ_ADCPARENT: - set_irq_chip(irqno, &s3c_irq_level_chip); - set_irq_handler(irqno, handle_level_irq); - break; - - case IRQ_RESERVED6: - case IRQ_RESERVED24: - /* no IRQ here */ - break; - - default: - //irqdbf("registering irq %d (s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_chip); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } - - /* setup the cascade irq handlers */ - - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); - - set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); - set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); - set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); - set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); - - /* external interrupts */ - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irqdbf("registering irq %d (ext int)\n", irqno); - set_irq_chip(irqno, &s3c_irq_eint0t4); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { - irqdbf("registering irq %d (extended s3c irq)\n", irqno); - set_irq_chip(irqno, &s3c_irqext_chip); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* register the uart interrupts */ - - irqdbf("s3c2410: registering external interrupts\n"); - - for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { - irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart0); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { - irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart1); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { - irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_uart2); - set_irq_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { - irqdbf("registering irq %d (s3c adc irq)\n", irqno); - set_irq_chip(irqno, &s3c_irq_adc); - set_irq_handler(irqno, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - irqdbf("s3c2410: registered interrupt handlers\n"); -} +arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 817e2c6..72f2cc4 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -1,4 +1,4 @@ -/*********************************************************************** +/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c * * linux/arch/arm/mach-s3c2410/mach-amlm5900.c * @@ -35,7 +35,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/proc_fs.h> - +#include <linux/serial_core.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -52,8 +52,8 @@ #include <asm/arch/regs-lcd.h> #include <asm/arch/regs-gpio.h> -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #ifdef CONFIG_MTD_PARTITIONS @@ -113,12 +113,6 @@ static struct platform_device amlm5900_device_nor = { #endif static struct map_desc amlm5900_iodesc[] __initdata = { - { - .virtual = (u32)S3C24XX_VA_SPI, - .pfn = __phys_to_pfn(S3C2410_PA_SPI), - .length = SZ_1M, - .type = MT_DEVICE - } }; #define UCON S3C2410_UCON_DEFAULT diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index b8b7675..7b81296 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -50,9 +50,9 @@ #include <linux/serial_8250.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #include "usb-simtec.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 15b625e..01c60d0 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -25,23 +25,24 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> - #include <asm/arch/regs-serial.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> #include <asm/arch/h1940.h> #include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> +#include <asm/arch/udc.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> static struct map_desc h1940_iodesc[] __initdata = { [0] = { @@ -102,6 +103,32 @@ void h1940_latch_control(unsigned int clear, unsigned int set) EXPORT_SYMBOL_GPL(h1940_latch_control); +static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); + + switch (cmd) + { + case S3C2410_UDC_P_ENABLE : + h1940_latch_control(0, H1940_LATCH_USB_DP); + break; + case S3C2410_UDC_P_DISABLE : + h1940_latch_control(H1940_LATCH_USB_DP, 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; + } +} + +static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { + .udc_command = h1940_udc_pullup, + .vbus_pin = S3C2410_GPG5, + .vbus_pin_inverted = 1, +}; + + /** * Set lcd on or off @@ -146,12 +173,19 @@ static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = { .bpp= {16,16,16}, }; +static struct platform_device s3c_device_leds = { + .name = "h1940-leds", + .id = -1, +}; + static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_usbgadget, + &s3c_device_leds, }; static struct s3c24xx_board h1940_board __initdata = { @@ -179,7 +213,23 @@ static void __init h1940_init_irq(void) static void __init h1940_init(void) { + u32 tmp; + s3c24xx_fb_set_platdata(&h1940_lcdcfg); + s3c24xx_udc_set_platdata(&h1940_udc_cfg); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + tmp = ( + 0x78 << S3C2410_PLLCON_MDIVSHIFT) + | (0x02 << S3C2410_PLLCON_PDIVSHIFT) + | (0x03 << S3C2410_PLLCON_SDIVSHIFT); + writel(tmp, S3C2410_UPLLCON); } MACHINE_START(H1940, "IPAQ-H1940") @@ -189,6 +239,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, .init_irq = h1940_init_irq, - .init_machine = h1940_init, + .init_machine = h1940_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0411e9a..261aa4c 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -29,7 +29,6 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -38,10 +37,10 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/iic.h> -#include "s3c2410.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 2c738b3..c78ab75 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -32,10 +32,10 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> -#include "s3c2410.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c new file mode 100644 index 0000000..c6a4159 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -0,0 +1,448 @@ +/* linux/arch/arm/mach-s3c2410/mach-qt2410.c + * + * Copyright (C) 2006 by OpenMoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/mmc/protocol.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/leds-gpio.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/fb.h> +#include <asm/arch/nand.h> +#include <asm/arch/udc.h> +#include <asm/arch/spi.h> +#include <asm/arch/spi-gpio.h> + +#include <asm/plat-s3c24xx/common-smdk.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> + +static struct map_desc qt2410_iodesc[] __initdata = { + { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk2410_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +/* LCD driver info */ + +/* Configuration for 640x480 SHARP LQ080V3DG01 */ +static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */ + + .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */ + S3C2410_LCDCON2_LINEVAL(479) | + S3C2410_LCDCON2_VFPD(10) | /* 11 */ + S3C2410_LCDCON2_VSPW(14), /* 15 */ + + .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */ + S3C2410_LCDCON3_HOZVAL(639) | /* 640 */ + S3C2410_LCDCON3_HFPD(115), /* 116 */ + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(95), /* 96 */ + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 640, + .height = 480, + + .xres = { + .min = 640, + .max = 640, + .defval = 640, + }, + + .yres = { + .min = 480, + .max = 480, + .defval = 480, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* Configuration for 480x640 toppoly TD028TTEC1 */ +static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */ + + .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */ + S3C2410_LCDCON2_LINEVAL(639) |/* 640 */ + S3C2410_LCDCON2_VFPD(3) | /* 4 */ + S3C2410_LCDCON2_VSPW(1), /* 2 */ + + .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */ + S3C2410_LCDCON3_HOZVAL(479) | /* 479 */ + S3C2410_LCDCON3_HFPD(23), /* 24 */ + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(7), /* 8 */ + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 480, + .height = 640, + + .xres = { + .min = 480, + .max = 480, + .defval = 480, + }, + + .yres = { + .min = 640, + .max = 640, + .defval = 640, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* Config for 240x320 LCD */ +static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x04), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | + S3C2410_LCDCON2_LINEVAL(319) | + S3C2410_LCDCON2_VFPD(6) | + S3C2410_LCDCON2_VSPW(3), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(12) | + S3C2410_LCDCON3_HOZVAL(239) | + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .min = 320, + .max = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + +/* CS8900 */ + +static struct resource qt2410_cs89x0_resources[] = { + [0] = { + .start = 0x19000000, + .end = 0x19000000 + 16, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT9, + .end = IRQ_EINT9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device qt2410_cs89x0 = { + .name = "cirrus-cs89x0", + .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources), + .resource = qt2410_cs89x0_resources, +}; + +/* LED */ + +static struct s3c24xx_led_platdata qt2410_pdata_led = { + .gpio = S3C2410_GPB0, + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .name = "led", + .def_trigger = "timer", +}; + +static struct platform_device qt2410_led = { + .name = "s3c24xx_led", + .id = 0, + .dev = { + .platform_data = &qt2410_pdata_led, + }, +}; + +/* SPI */ + +static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) +{ + switch (cs) { + case BITBANG_CS_ACTIVE: + s3c2410_gpio_setpin(S3C2410_GPB5, 0); + break; + case BITBANG_CS_INACTIVE: + s3c2410_gpio_setpin(S3C2410_GPB5, 1); + break; + } +} + +static struct s3c2410_spigpio_info spi_gpio_cfg = { + .pin_clk = S3C2410_GPG7, + .pin_mosi = S3C2410_GPG6, + .pin_miso = S3C2410_GPG5, + .chip_select = &spi_gpio_cs, +}; + + +static struct platform_device qt2410_spi = { + .name = "s3c24xx-spi-gpio", + .id = 1, + .dev = { + .platform_data = &spi_gpio_cfg, + }, +}; + +/* Board devices */ + +static struct platform_device *qt2410_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_sdi, + &s3c_device_usbgadget, + &qt2410_spi, + &qt2410_cs89x0, + &qt2410_led, +}; + +static struct s3c24xx_board qt2410_board __initdata = { + .devices = qt2410_devices, + .devices_count = ARRAY_SIZE(qt2410_devices) +}; + +static struct mtd_partition qt2410_nand_part[] = { + [0] = { + .name = "U-Boot", + .size = 0x30000, + .offset = 0, + }, + [1] = { + .name = "U-Boot environment", + .offset = 0x30000, + .size = 0x4000, + }, + [2] = { + .name = "kernel", + .offset = 0x34000, + .size = SZ_2M, + }, + [3] = { + .name = "initrd", + .offset = 0x234000, + .size = SZ_4M, + }, + [4] = { + .name = "jffs2", + .offset = 0x634000, + .size = 0x39cc000, + }, +}; + +static struct s3c2410_nand_set qt2410_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(qt2410_nand_part), + .partitions = qt2410_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. + */ + +static struct s3c2410_platform_nand qt2410_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(qt2410_nand_sets), + .sets = qt2410_nand_sets, +}; + +/* UDC */ + +static struct s3c2410_udc_mach_info qt2410_udc_cfg = { +}; + +static char tft_type = 's'; + +static int __init qt2410_tft_setup(char *str) +{ + tft_type = str[0]; + return 1; +} + +__setup("tft=", qt2410_tft_setup); + +static void __init qt2410_map_io(void) +{ + s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); + s3c24xx_init_clocks(12*1000*1000); + s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + s3c24xx_set_board(&qt2410_board); +} + +static void __init qt2410_machine_init(void) +{ + s3c_device_nand.dev.platform_data = &qt2410_nand_info; + + switch (tft_type) { + case 'p': /* production */ + s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg); + break; + case 'b': /* big */ + s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg); + break; + case 's': /* small */ + default: + s3c24xx_fb_set_platdata(&qt2410_lcd_cfg); + break; + } + + s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB0, 1); + + s3c24xx_udc_set_platdata(&qt2410_udc_cfg); + + s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); + + s3c2410_pm_init(); +} + +MACHINE_START(QT2410, "QT2410") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = qt2410_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = qt2410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END + + diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 01c0c98..57b8a80 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -1,4 +1,4 @@ -/*********************************************************************** +/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c * * linux/arch/arm/mach-s3c2410/mach-smdk2410.c * @@ -49,10 +49,10 @@ #include <asm/arch/regs-serial.h> -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> -#include "common-smdk.h" +#include <asm/plat-s3c24xx/common-smdk.h> static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index a382fc0..c947c75 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -43,9 +43,9 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/leds-gpio.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #include "usb-simtec.h" /* macros for virtual address mods for the io space entries */ diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index ebf294d..3b3a7db 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,11 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004,2006 Simtec Electronics + * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX Power Manager (Suspend-To-RAM) support - * - * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,640 +18,139 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Parts based on arch/arm/mach-pxa/pm.c - * - * Thanks to Dimitry Andric for debugging */ #include <linux/init.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial_core.h> +#include <linux/sysdev.h> -#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-irq.h> - -#include <asm/mach/time.h> - -#include "pm.h" - -/* for external use */ - -unsigned long s3c_pm_flags; - -#define PFX "s3c24xx-pm: " - -static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - - /* we restore the timings here, with the proviso that the board - * brings the system up in an slower, or equal frequency setting - * to the original system. - * - * if we cannot guarantee this, then things are going to go very - * wrong here, as we modify the refresh and both pll settings. - */ - - SAVE_ITEM(S3C2410_BWSCON), - SAVE_ITEM(S3C2410_BANKCON0), - SAVE_ITEM(S3C2410_BANKCON1), - SAVE_ITEM(S3C2410_BANKCON2), - SAVE_ITEM(S3C2410_BANKCON3), - SAVE_ITEM(S3C2410_BANKCON4), - SAVE_ITEM(S3C2410_BANKCON5), - - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), - SAVE_ITEM(S3C2410_REFRESH), -}; - -static struct sleep_save gpio_save[] = { - SAVE_ITEM(S3C2410_GPACON), - SAVE_ITEM(S3C2410_GPADAT), - - SAVE_ITEM(S3C2410_GPBCON), - SAVE_ITEM(S3C2410_GPBDAT), - SAVE_ITEM(S3C2410_GPBUP), - - SAVE_ITEM(S3C2410_GPCCON), - SAVE_ITEM(S3C2410_GPCDAT), - SAVE_ITEM(S3C2410_GPCUP), - - SAVE_ITEM(S3C2410_GPDCON), - SAVE_ITEM(S3C2410_GPDDAT), - SAVE_ITEM(S3C2410_GPDUP), - - SAVE_ITEM(S3C2410_GPECON), - SAVE_ITEM(S3C2410_GPEDAT), - SAVE_ITEM(S3C2410_GPEUP), - - SAVE_ITEM(S3C2410_GPFCON), - SAVE_ITEM(S3C2410_GPFDAT), - SAVE_ITEM(S3C2410_GPFUP), +#include <asm/mach-types.h> - SAVE_ITEM(S3C2410_GPGCON), - SAVE_ITEM(S3C2410_GPGDAT), - SAVE_ITEM(S3C2410_GPGUP), - - SAVE_ITEM(S3C2410_GPHCON), - SAVE_ITEM(S3C2410_GPHDAT), - SAVE_ITEM(S3C2410_GPHUP), +#include <asm/arch/regs-gpio.h> +#include <asm/arch/h1940.h> - SAVE_ITEM(S3C2410_DCLKCON), -}; +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> #ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - +extern void pm_dbg(const char *fmt, ...); #define DBG(fmt...) pm_dbg(fmt) #else #define DBG(fmt...) printk(KERN_DEBUG fmt) - -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; #endif -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) +static void s3c2410_pm_prepare(void) { - crc_size = 0; + /* ensure at least GSTATUS3 has the resume address */ - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} + if (machine_is_h1940()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; + /* generate check for the bootloader to check on resume */ - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + for (ptr = 0; ptr < 0x40000; ptr += 0x400) + calc += __raw_readl(base+ptr); - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; + /* the RX3715 uses similar code and the same H1940 and the + * same offsets for resume and checksum pointers */ - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; + if (machine_is_rx3715()) { + void *base = phys_to_virt(H1940_SUSPEND_CHECK); + unsigned long ptr; + unsigned long calc = 0; - ptr = phys_to_virt(addr); + /* generate check for the bootloader to check on resume */ - if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } + for (ptr = 0; ptr < 0x40000; ptr += 0x4) + calc += __raw_readl(base+ptr); - if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; + __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - return val; -} + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } } -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) +static int s3c2410_pm_resume(struct sys_device *dev) { - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} + unsigned long tmp; -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ + /* unset the return-from-sleep flag, to ensure reset */ -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } + return 0; } -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static int s3c2410_pm_add(struct sys_device *dev) { - int i; + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L<<i)) { - DBG("IRQ %d asserted at resume\n", start+i); - } - } + return 0; } -/* s3c2410_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - unsigned long irqstate; - unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); - - if (irqoffs < 4) - irqstate = s3c_irqwake_intmask & (1L<<irqoffs); - else - irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - - pinstate = s3c2410_gpio_getcfg(pin); - - if (!irqstate) { - if (pinstate == S3C2410_GPIO_IRQ) - DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); - } else { - if (pinstate == S3C2410_GPIO_IRQ) { - DBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); - } - } -} +#if defined(CONFIG_CPU_S3C2410) +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* s3c2410_pm_configure_extint - * - * configure all external interrupt pins -*/ +/* register ourselves */ -static void s3c2410_pm_configure_extint(void) +static int __init s3c2410_pm_drvinit(void) { - int pin; - - /* for each of the external interrupts (EINT0..EINT15) we - * need to check wether it is an external interrupt source, - * and then configure it as an input if it is not - */ - - for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); - } - - for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); - } + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); } -void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); - -#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) - -/* s3c2410_pm_enter - * - * central control for sleep/resume process -*/ - -static int s3c2410_pm_enter(suspend_state_t state) -{ - unsigned long regs_save[16]; - - /* ensure the debug is initialised (if enabled) */ - - s3c2410_pm_debug_init(); - - DBG("s3c2410_pm_enter(%d)\n", state); - - if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { - printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); - return -EINVAL; - } - - if (state != PM_SUSPEND_MEM) { - printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); - return -EINVAL; - } - - /* check if we have anything to wake-up with... bad things seem - * to happen if you suspend with no wakeup (system will often - * require a full power-cycle) - */ - - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && - !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { - printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); - printk(KERN_ERR PFX "Aborting sleep\n"); - return -EINVAL; - } - - /* prepare check area if configured */ - - s3c2410_pm_check_prepare(); - - /* store the physical address of the register recovery block */ - - s3c2410_sleep_save_phys = virt_to_phys(regs_save); - - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - - /* save all necessary core registers not covered by the drivers */ - - s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); - - /* set the irq configuration for wake */ - - s3c2410_pm_configure_extint(); - - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", - s3c_irqwake_intmask, s3c_irqwake_eintmask); - - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - - /* call cpu specific preperation */ - - pm_cpu_prep(); - - /* flush cache back to ram */ - - flush_cache_all(); - - s3c2410_pm_check_store(); - - /* send the cpu to sleep... */ - - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ - - if (s3c2410_cpu_save(regs_save) == 0) { - flush_cache_all(); - pm_cpu_sleep(); - } - - /* restore the cpu state */ - - cpu_init(); - - /* restore the system state */ - - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); - - s3c2410_pm_debug_init(); - - /* check what irq (if any) restored the system */ - - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); - - DBG("post sleep, preparing to return\n"); - - s3c2410_pm_check_restore(); - - /* ok, let's return from sleep */ +arch_initcall(s3c2410_pm_drvinit); +#endif - DBG("S3C2410 PM Resume (post-restore)\n"); - return 0; -} +#if defined(CONFIG_CPU_S3C2440) +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; -/* - * Called after processes are frozen, but before we shut down devices. - */ -static int s3c2410_pm_prepare(suspend_state_t state) +static int __init s3c2440_pm_drvinit(void) { - return 0; + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); } -/* - * Called after devices are re-setup, but before processes are thawed. - */ -static int s3c2410_pm_finish(suspend_state_t state) -{ - return 0; -} +arch_initcall(s3c2440_pm_drvinit); +#endif -/* - * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. - */ -static struct pm_ops s3c2410_pm_ops = { - .pm_disk_mode = PM_DISK_FIRMWARE, - .prepare = s3c2410_pm_prepare, - .enter = s3c2410_pm_enter, - .finish = s3c2410_pm_finish, +#if defined(CONFIG_CPU_S3C2442) +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, }; -/* s3c2410_pm_init - * - * Attach the power management functions. This should be called - * from the board specific initialisation if the board supports - * it. -*/ - -int __init s3c2410_pm_init(void) +static int __init s3c2442_pm_drvinit(void) { - printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); - - pm_set_ops(&s3c2410_pm_ops); - return 0; + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); } + +arch_initcall(s3c2442_pm_drvinit); +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c deleted file mode 100644 index 992cc6a..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-clock.c +++ /dev/null @@ -1,276 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sysdev.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> - -#include <asm/mach/map.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-gpio.h> - -#include "s3c2410.h" -#include "clock.h" -#include "cpu.h" - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus, - }, { - .name = "usb-bus-gadget", - .id = -1, - .parent = &clk_usb_bus, - }, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *clkp; - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c deleted file mode 100644 index e67ba39..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-dma.c +++ /dev/null @@ -1,161 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> - -#include <asm/dma.h> -#include <asm/arch/dma.h> -#include "dma.h" - -#include "cpu.h" - -#include <asm/arch/regs-serial.h> -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-ac97.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-lcd.h> -#include <asm/arch/regs-sdi.h> -#include <asm/arch/regs-iis.h> -#include <asm/arch/regs-spi.h> - -static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { - .select = s3c2410_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2410_dma_mappings, - .map_size = ARRAY_SIZE(s3c2410_dma_mappings), -}; - -static int s3c2410_dma_add(struct sys_device *sysdev) -{ - return s3c24xx_dma_init_map(&s3c2410_dma_sel); -} - -#if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_dma_driver = { - .add = s3c2410_dma_add, -}; - -static int __init s3c2410_dma_init(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); -} - -arch_initcall(s3c2410_dma_init); -#endif - -#if defined(CONFIG_CPU_S3C2442) -/* S3C2442 DMA contains the same selection table as the S3C2410 */ -static struct sysdev_driver s3c2442_dma_driver = { - .add = s3c2410_dma_add, -}; - -static int __init s3c2442_dma_init(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); -} - -arch_initcall(s3c2442_dma_init); -#endif - diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c deleted file mode 100644 index ec3a276..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-gpio.c +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <asm/arch/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) - return -1; - - config &= 0xff; - - pin -= S3C2410_GPG8; - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c deleted file mode 100644 index c796c9c..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-irq.c +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/ptrace.h> -#include <linux/sysdev.h> - -#include "cpu.h" -#include "pm.h" - -static int s3c2410_irq_add(struct sys_device *sysdev) -{ - return 0; -} - -static struct sysdev_driver s3c2410_irq_driver = { - .add = s3c2410_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int s3c2410_irq_init(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); -} - -arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c deleted file mode 100644 index 8bb6e5e..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-pm.c +++ /dev/null @@ -1,156 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/time.h> -#include <linux/sysdev.h> - -#include <asm/hardware.h> -#include <asm/io.h> - -#include <asm/mach-types.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/h1940.h> - -#include "cpu.h" -#include "pm.h" - -#ifdef CONFIG_S3C2410_PM_DEBUG -extern void pm_dbg(const char *fmt, ...); -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#endif - -static void s3c2410_pm_prepare(void) -{ - /* ensure at least GSTATUS3 has the resume address */ - - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - - if (machine_is_h1940()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x400) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - /* the RX3715 uses similar code and the same H1940 and the - * same offsets for resume and checksum pointers */ - - if (machine_is_rx3715()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); - unsigned long ptr; - unsigned long calc = 0; - - /* generate check for the bootloader to check on resume */ - - for (ptr = 0; ptr < 0x40000; ptr += 0x4) - calc += __raw_readl(base+ptr); - - __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); - } - - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 1); - -} - -static int s3c2410_pm_resume(struct sys_device *dev) -{ - unsigned long tmp; - - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - - return 0; -} - -static int s3c2410_pm_add(struct sys_device *dev) -{ - pm_cpu_prep = s3c2410_pm_prepare; - pm_cpu_sleep = s3c2410_cpu_suspend; - - return 0; -} - -#if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -/* register ourselves */ - -static int __init s3c2410_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); -} - -arch_initcall(s3c2410_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2440) -static struct sysdev_driver s3c2440_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -static int __init s3c2440_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); -} - -arch_initcall(s3c2440_pm_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2442) -static struct sysdev_driver s3c2442_pm_driver = { - .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, -}; - -static int __init s3c2442_pm_drvinit(void) -{ - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); -} - -arch_initcall(s3c2442_pm_drvinit); -#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S deleted file mode 100644 index 9179a10..0000000 --- a/arch/arm/mach-s3c2410/s3c2410-sleep.S +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 Power Manager (Suspend-To-RAM) support - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/hardware.h> -#include <asm/arch/map.h> - -#include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-clock.h> -#include <asm/arch/regs-mem.h> -#include <asm/arch/regs-serial.h> - - /* s3c2410_cpu_suspend - * - * put the cpu into sleep mode - */ - -ENTRY(s3c2410_cpu_suspend) - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 8 -s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep -1: beq 1b - mov pc, r14 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 4cdc0d7..1a86a98 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -31,10 +31,10 @@ #include <asm/arch/regs-clock.h> #include <asm/arch/regs-serial.h> -#include "s3c2410.h" -#include "cpu.h" -#include "devs.h" -#include "clock.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/clock.h> /* Initial IO mappings */ @@ -110,7 +110,7 @@ static struct sys_device s3c2410_sysdev = { /* need to register class before we actually register the device, and * we also need to ensure that it has been initialised before any of the - * drivers even try to use it (even if not on an s3c2440 based system) + * drivers even try to use it (even if not on an s3c2410 based system) * as a driver which may support both 2410 and 2440 may try and use it. */ diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 2018c2e..637aaba 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/sleep.S +/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -34,126 +34,35 @@ #include <asm/arch/regs-mem.h> #include <asm/arch/regs-serial.h> -/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not - * reset the UART configuration, only enable if you really need this! -*/ -//#define CONFIG_DEBUG_RESUME - - .text - - /* s3c2410_cpu_save - * - * save enough of the CPU state to allow us to re-start - * pm.c code. as we store items like the sp/lr, we will - * end up returning from this function when the cpu resumes - * so the return value is set to mark this. - * - * This arangement means we avoid having to flush the cache - * from this code. - * - * entry: - * r0 = pointer to save block - * - * exit: - * r0 = 0 => we stored everything - * 1 => resumed from sleep - */ - -ENTRY(s3c2410_cpu_save) - stmfd sp!, { r4 - r12, lr } - - @@ store co-processor registers - - mrc p15, 0, r4, c15, c1, 0 @ CP access register - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base address - mrc p15, 0, r8, c1, c0, 0 @ control register - - stmia r0, { r4 - r13 } - - mov r0, #0 - ldmfd sp, { r4 - r12, pc } - - @@ return to the caller, after having the MMU - @@ turned on, this restores the last bits from the - @@ stack -resume_with_mmu: - mov r0, #1 - ldmfd sp!, { r4 - r12, pc } - - .ltorg - - @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c2410_sleep_save_phys needs to be - @@ accessed by the resume code before it can restore the MMU. - @@ This means that the variable has to be close enough for the - @@ code to read it... since the .text segment needs to be RO, - @@ the data segment can be the only place to put this code. - - .data - - .global s3c2410_sleep_save_phys -s3c2410_sleep_save_phys: - .word 0 - - /* s3c2410_cpu_resume + /* s3c2410_cpu_suspend * - * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) + * put the cpu into sleep mode */ -ENTRY(s3c2410_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE - msr cpsr_c, r0 - - @@ load UART to allow us to print the two characters for - @@ resume debug - - mov r2, #S3C24XX_PA_UART & 0xff000000 - orr r2, r2, #S3C24XX_PA_UART & 0xff000 - -#if 0 - /* SMDK2440 LED set */ - mov r14, #S3C24XX_PA_GPIO - ldr r12, [ r14, #0x54 ] - bic r12, r12, #3<<4 - orr r12, r12, #1<<7 - str r12, [ r14, #0x54 ] -#endif - -#ifdef CONFIG_DEBUG_RESUME - mov r3, #'L' - strb r3, [ r2, #S3C2410_UTXH ] -1001: - ldrb r14, [ r3, #S3C2410_UTRSTAT ] - tst r14, #S3C2410_UTRSTAT_TXE - beq 1001b -#endif /* CONFIG_DEBUG_RESUME */ - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs - mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - - ldr r0, s3c2410_sleep_save_phys @ address of restore block - ldmia r0, { r4 - r13 } - - mcr p15, 0, r4, c15, c1, 0 @ CP access register - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base - -#ifdef CONFIG_DEBUG_RESUME - mov r3, #'R' - strb r3, [ r2, #S3C2410_UTXH ] -#endif - - ldr r2, =resume_with_mmu - mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc - nop @ second-to-last before mmu - mov pc, r2 @ go back to virtual address - - .ltorg +ENTRY(s3c2410_cpu_suspend) + @@ prepare cpu to sleep + + ldr r4, =S3C2410_REFRESH + ldr r5, =S3C24XX_MISCCR + ldr r6, =S3C2410_CLKCON + ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) + ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) + ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache + bl s3c2410_do_sleep + teq r0, r0 @ now do it for real + b s3c2410_do_sleep @ + + @@ align next bit of code to cache line + .align 5 +s3c2410_do_sleep: + streq r7, [ r4 ] @ SDRAM sleep command + streq r8, [ r5 ] @ SDRAM power-down config + streq r9, [ r6 ] @ CPU sleep +1: beq 1b + mov pc, r14 diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 22b0e1c..bcd562a 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -35,7 +35,7 @@ #include <asm/io.h> #include <asm/irq.h> -#include "devs.h" +#include <asm/plat-s3c24xx/devs.h> #include "usb-simtec.h" /* control power and monitor over-current events on various Simtec diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig new file mode 100644 index 0000000..befc5fd --- /dev/null +++ b/arch/arm/mach-s3c2412/Kconfig @@ -0,0 +1,58 @@ +# arch/arm/mach-s3c2412/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2412 + bool + depends on ARCH_S3C2410 + select S3C2412_PM if PM + select S3C2412_DMA if S3C2410_DMA + help + Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line + +config CPU_S3C2412_ONLY + bool + depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ + !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 + default y if CPU_S3C2412 + +config S3C2412_DMA + bool + depends on CPU_S3C2412 + help + Internal config node for S3C2412 DMA support + +config S3C2412_PM + bool + help + Internal config node to apply S3C2412 power management + + +menu "S3C2412 Machines" + +config MACH_SMDK2413 + bool "SMDK2413" + select CPU_S3C2412 + select MACH_S3C2413 + select MACH_SMDK + help + Say Y here if you are using an SMDK2413 + +config MACH_S3C2413 + bool + help + Internal node for S3C2413 version of SMDK2413, so that + machine_is_s3c2413() will work when MACH_SMDK2413 is + selected + +config MACH_VSTMS + bool "VMSTMS" + select CPU_S3C2412 + help + Say Y here if you are using an VSTMS board + + +endmenu + diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile new file mode 100644 index 0000000..f8e0116 --- /dev/null +++ b/arch/arm/mach-s3c2412/Makefile @@ -0,0 +1,21 @@ +# arch/arm/mach-s3c2412/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += irq.o +obj-$(CONFIG_CPU_S3C2412) += clock.o +obj-$(CONFIG_S3C2412_DMA) += dma.o +obj-$(CONFIG_S3C2412_PM) += pm.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2412/clock.c index 8f94ad8..6a8e444 100644 --- a/arch/arm/mach-s3c2410/s3c2412-clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c +/* linux/arch/arm/mach-s3c2412/clock.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -41,9 +41,9 @@ #include <asm/arch/regs-clock.h> #include <asm/arch/regs-gpio.h> -#include "s3c2412.h" -#include "clock.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2412.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> /* We currently have to assume that the system is running * from the XTPll input, and that all ***REFCLKs are being diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2412/dma.c index 138f726..d0f4695 100644 --- a/arch/arm/mach-s3c2410/s3c2412-dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c +/* linux/arch/arm/mach-s3c2412/dma.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -21,8 +21,8 @@ #include <asm/arch/dma.h> #include <asm/io.h> -#include "dma.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/dma.h> +#include <asm/plat-s3c24xx/cpu.h> #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> @@ -146,6 +146,7 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { static int s3c2412_dma_add(struct sys_device *sysdev) { + s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); } diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2412/irq.c index ffcc30b..e89dbdc 100644 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c +/* linux/arch/arm/mach-s3c2412/irq.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -35,9 +35,9 @@ #include <asm/arch/regs-irq.h> #include <asm/arch/regs-gpio.h> -#include "cpu.h" -#include "irq.h" -#include "pm.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/irq.h> +#include <asm/plat-s3c24xx/pm.h> /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by * having them turn up in both the INT* and the EINT* registers. Whilst diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 4f89abd..b5befce 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c +/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -37,15 +37,16 @@ #include <asm/arch/regs-lcd.h> #include <asm/arch/idle.h> +#include <asm/arch/udc.h> #include <asm/arch/fb.h> -#include "s3c2410.h" -#include "s3c2412.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2412.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> -#include "common-smdk.h" +#include <asm/plat-s3c24xx/common-smdk.h> static struct map_desc smdk2413_iodesc[] __initdata = { }; @@ -75,12 +76,38 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { } }; +static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); + + switch (cmd) + { + case S3C2410_UDC_P_ENABLE : + s3c2410_gpio_setpin(S3C2410_GPF2, 1); + break; + case S3C2410_UDC_P_DISABLE : + s3c2410_gpio_setpin(S3C2410_GPF2, 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; + } +} + + +static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { + .udc_command = smdk2413_udc_pullup, +}; + + static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_usb, //&s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_usbgadget, }; static struct s3c24xx_board smdk2413_board __initdata = { @@ -109,7 +136,19 @@ static void __init smdk2413_map_io(void) } static void __init smdk2413_machine_init(void) -{ +{ /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_gpio_setpin(S3C2410_GPF2, 0); + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + + s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); + smdk_machine_init(); } @@ -126,6 +165,19 @@ MACHINE_START(S3C2413, "S3C2413") .timer = &s3c24xx_timer, MACHINE_END +MACHINE_START(SMDK2412, "SMDK2412") + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = smdk2413_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = smdk2413_map_io, + .init_machine = smdk2413_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END + MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben@fluff.org> */ .phys_io = S3C2410_PA_UART, diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 0360e10..4231b54 100644 --- a/arch/arm/mach-s3c2410/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-vstms.c +/* linux/arch/arm/mach-s3c2412/mach-vstms.c * * (C) 2006 Thomas Gleixner <tglx@linutronix.de> * @@ -28,7 +28,6 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/setup.h> #include <asm/io.h> #include <asm/irq.h> @@ -43,11 +42,11 @@ #include <asm/arch/nand.h> -#include "s3c2410.h" -#include "s3c2412.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2412.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc vstms_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2412/pm.c index 19b6332..8988dac 100644 --- a/arch/arm/mach-s3c2410/s3c2412-pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c +/* linux/arch/arm/mach-s3c2412/pm.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -28,10 +28,10 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-dsc.h> -#include "cpu.h" -#include "pm.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> -#include "s3c2412.h" +#include <asm/plat-s3c24xx/s3c2412.h> static void s3c2412_cpu_suspend(void) { diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 2f651a8..aafe0bc 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2412.c +/* linux/arch/arm/mach-s3c2412/s3c2412.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -38,11 +38,11 @@ #include <asm/arch/regs-gpioj.h> #include <asm/arch/regs-dsc.h> -#include "s3c2412.h" -#include "cpu.h" -#include "devs.h" -#include "clock.h" -#include "pm.h" +#include <asm/plat-s3c24xx/s3c2412.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/pm.h> #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig new file mode 100644 index 0000000..e3bfda0 --- /dev/null +++ b/arch/arm/mach-s3c2440/Kconfig @@ -0,0 +1,71 @@ +# arch/arm/mach-s3c2440/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2440 + bool + depends on ARCH_S3C2410 + select S3C2410_CLOCK + select S3C2410_PM if PM + select S3C2410_GPIO + select S3C2440_DMA if S3C2410_DMA + select CPU_S3C244X + help + Support for S3C2440 Samsung Mobile CPU based systems. + +config S3C2440_DMA + bool + depends on ARCH_S3C2410 && CPU_S3C24405B + help + Support for S3C2440 specific DMA code5A + + +menu "S3C2440 Machines" + +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select CPU_S3C2440 + select PM_SIMTEC if PM + help + Say Y here if you are using the Simtec Electronics ANUBIS + development system + +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select CPU_S3C2440 + select PM_SIMTEC if PM + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + +config MACH_RX3715 + bool "HP iPAQ rx3715" + select CPU_S3C2440 + select PM_H1940 if PM + help + Say Y here if you are using the HP iPAQ rx3715. + +config ARCH_S3C2440 + bool "SMDK2440" + select CPU_S3C2440 + select MACH_SMDK + help + Say Y here if you are using the SMDK2440. + +config MACH_NEXCODER_2440 + bool "NexVision NEXCODER 2440 Light Board" + select CPU_S3C2440 + help + Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board + +config SMDK2440_CPU2440 + bool "SMDK2440 with S3C2440 CPU module" + depends on ARCH_S3C2440 + default y if ARCH_S3C2440 + select CPU_S3C2440 + + +endmenu + diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile new file mode 100644 index 0000000..c81ed62 --- /dev/null +++ b/arch/arm/mach-s3c2440/Makefile @@ -0,0 +1,23 @@ +# arch/arm/mach-s3c2440/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o +obj-$(CONFIG_CPU_S3C2440) += irq.o +obj-$(CONFIG_CPU_S3C2440) += clock.o +obj-$(CONFIG_S3C2440_DMA) += dma.o + +# Machine support + +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o +obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o +obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o +obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2440/clock.c index ba13c1d..79e2ea4 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c +/* linux/arch/arm/mach-s3c2440/clock.c * * Copyright (c) 2004-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -41,8 +41,8 @@ #include <asm/arch/regs-clock.h> -#include "clock.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2440/dma.c index 47b861b..cd035a3 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c +/* linux/arch/arm/mach-s3c2440/dma.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -19,9 +19,9 @@ #include <asm/dma.h> #include <asm/arch/dma.h> -#include "dma.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/dma.h> +#include <asm/plat-s3c24xx/cpu.h> #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> @@ -147,8 +147,53 @@ static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { .map_size = ARRAY_SIZE(s3c2440_dma_mappings), }; +static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { + .channels = { + [DMACH_SDI] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + [2] = 1 | DMA_CH_VALID, + [3] = 0 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_IN] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + [DMACH_I2S_OUT] = { + .list = { + [0] = 2 | DMA_CH_VALID, + [1] = 1 | DMA_CH_VALID, + }, + }, + [DMACH_PCM_IN] = { + .list = { + [0] = 2 | DMA_CH_VALID, + [1] = 1 | DMA_CH_VALID, + }, + }, + [DMACH_PCM_OUT] = { + .list = { + [0] = 1 | DMA_CH_VALID, + [1] = 3 | DMA_CH_VALID, + }, + }, + [DMACH_MIC_IN] = { + .list = { + [0] = 3 | DMA_CH_VALID, + [1] = 2 | DMA_CH_VALID, + }, + }, + }, +}; + static int s3c2440_dma_add(struct sys_device *sysdev) { + s3c2410_dma_init(); + s3c24xx_dma_order_set(&s3c2440_dma_order); return s3c24xx_dma_init_map(&s3c2440_dma_sel); } diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2440/dsc.c index c92ea66..2995ff5 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dsc.c +++ b/arch/arm/mach-s3c2440/dsc.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c +/* linux/arch/arm/mach-s3c2440/dsc.c * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -27,8 +27,8 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-dsc.h> -#include "cpu.h" -#include "s3c2440.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/s3c2440.h> int s3c2440_set_dsc(unsigned int pin, unsigned int value) { diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2440/irq.c index 1ba19b2..1069d13 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c +/* linux/arch/arm/mach-s3c2440/irq.c * * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -35,9 +35,9 @@ #include <asm/arch/regs-irq.h> #include <asm/arch/regs-gpio.h> -#include "cpu.h" -#include "pm.h" -#include "irq.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> +#include <asm/plat-s3c24xx/irq.h> /* WDT/AC97 */ diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 0fad0c2..3f0288e 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-anubis.c +/* linux/arch/arm/mach-s3c2440/mach-anubis.c * * Copyright (c) 2003-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -42,9 +42,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index d6dfdad..6d551d8 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c +/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c * * Copyright (c) 2004 Nex Vision * Guillaume GOURAT <guillaume.gourat@nexvision.tv> @@ -38,11 +38,11 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-serial.h> -#include "s3c2410.h" -#include "s3c2440.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2440.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct map_desc nexcoder_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 37b4085..2ed8e51 100644 --- a/arch/arm/mach-s3c2410/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-osiris.c +/* linux/arch/arm/mach-s3c2440/mach-osiris.c * * Copyright (c) 2005 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -41,9 +41,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> /* onboard perihpheral map */ diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index ecbcdf7..480ccde 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-rx3715.c +/* linux/arch/arm/mach-s3c2440/mach-rx3715.c * * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -33,7 +33,6 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -46,10 +45,10 @@ #include <asm/arch/nand.h> #include <asm/arch/fb.h> -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 2b61f4e..c17eb5b 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c +/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c * * Copyright (c) 2004,2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -27,12 +27,10 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> -#include <asm/hardware/iomd.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach-types.h> -//#include <asm/debug-ll.h> #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-lcd.h> @@ -40,13 +38,13 @@ #include <asm/arch/idle.h> #include <asm/arch/fb.h> -#include "s3c2410.h" -#include "s3c2440.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2440.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> -#include "common-smdk.h" +#include <asm/plat-s3c24xx/common-smdk.h> static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -144,6 +142,7 @@ static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = { #endif .lpcsel = ((0xCE6) & ~7) | 1<<4, + .type = S3C2410_LCDCON1_TFT16BPP, .width = 240, .height = 320, diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 344eb27..90e1da6 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2440.c +/* linux/arch/arm/mach-s3c2440/s3c2440.c * * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -29,9 +29,9 @@ #include <asm/io.h> #include <asm/irq.h> -#include "s3c2440.h" -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2440.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig new file mode 100644 index 0000000..bf8d87a --- /dev/null +++ b/arch/arm/mach-s3c2442/Kconfig @@ -0,0 +1,27 @@ +# arch/arm/mach-s3c2442/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2442 + bool + depends on ARCH_S3C2420 + select S3C2410_CLOCK + select S3C2410_GPIO + select S3C2410_PM if PM + select CPU_S3C244X + help + Support for S3C2442 Samsung Mobile CPU based systems. + + +menu "S3C2442 Machines" + +config SMDK2440_CPU2442 + bool "SMDM2440 with S3C2442 CPU module" + depends on ARCH_S3C2440 + select CPU_S3C2442 + + +endmenu + diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile new file mode 100644 index 0000000..2a909c6 --- /dev/null +++ b/arch/arm/mach-s3c2442/Makefile @@ -0,0 +1,16 @@ +# arch/arm/mach-s3c2442/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2442) += clock.o + +# Machine support + diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2442/clock.c index 4e292ca..5b9e830 100644 --- a/arch/arm/mach-s3c2410/s3c2442-clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c +/* linux/arch/arm/mach-s3c2442/clock.c * * Copyright (c) 2004-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -41,8 +41,8 @@ #include <asm/arch/regs-clock.h> -#include "clock.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> /* S3C2442 extended clock support */ diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c index 428732e..fbf8264 100644 --- a/arch/arm/mach-s3c2410/s3c2442.c +++ b/arch/arm/mach-s3c2442/s3c2442.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2442.c +/* linux/arch/arm/mach-s3c2442/s3c2442.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -19,8 +19,8 @@ #include <linux/serial_core.h> #include <linux/sysdev.h> -#include "s3c2442.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/s3c2442.h> +#include <asm/plat-s3c24xx/cpu.h> static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig new file mode 100644 index 0000000..c649bb2 --- /dev/null +++ b/arch/arm/mach-s3c2443/Kconfig @@ -0,0 +1,29 @@ +# arch/arm/mach-s3c2443/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2443 + bool + depends on ARCH_S3C2410 + select S3C2443_DMA if S3C2410_DMA + help + Support for the S3C2443 SoC from the S3C24XX line + +config S3C2443_DMA + bool + depends on CPU_S3C2443 + help + Internal config node for S3C2443 DMA support + +menu "S3C2443 Machines" + +config MACH_SMDK2443 + bool "SMDK2443" + select CPU_S3C2443 + select MACH_SMDK + help + Say Y here if you are using an SMDK2443 + +endmenu diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile new file mode 100644 index 0000000..d1843c9 --- /dev/null +++ b/arch/arm/mach-s3c2443/Makefile @@ -0,0 +1,20 @@ +# arch/arm/mach-s3c2443/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += irq.o +obj-$(CONFIG_CPU_S3C2443) += clock.o + +obj-$(CONFIG_S3C2443_DMA) += dma.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c new file mode 100644 index 0000000..dd2272f --- /dev/null +++ b/arch/arm/mach-s3c2443/clock.c @@ -0,0 +1,1007 @@ +/* linux/arch/arm/mach-s3c2443/clock.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/regs-s3c2443-clock.h> + +#include <asm/plat-s3c24xx/s3c2443.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> + +/* We currently have to assume that the system is running + * from the XTPll input, and that all ***REFCLKs are being + * fed from it, as we cannot read the state of OM[4] from + * software. + * + * It would be possible for each board initialisation to + * set the correct muxing at initialisation +*/ + +static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_HCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_HCLKCON); + + return 0; +} + +static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_PCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_HCLKCON); + + return 0; +} + +static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_SCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_SCLKCON); + + return 0; +} + +static unsigned long s3c2443_roundrate_clksrc(struct clk *clk, + unsigned long rate, + unsigned int max) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations as they cancel out */ + + div = (rate / parent_rate); + + if (div < 1) + div = 1; + else if (div > max) + div = max; + + return parent_rate / div; +} + +static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 4); +} + +static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 16); +} + +static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 256); +} + +/* clock selections */ + +/* CPU EXTCLK input */ +static struct clk clk_ext = { + .name = "ext", + .id = -1, +}; + +static struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, + .id = -1, +}; + +#if 0 +static struct clk clk_mpll = { + .name = "mpll", + .parent = &clk_mpllref, + .id = -1, +}; +#endif + +static struct clk clk_epllref; + +static struct clk clk_epll = { + .name = "epll", + .parent = &clk_epllref, + .id = -1, +}; + +static struct clk clk_i2s_ext = { + .name = "i2s-ext", + .id = -1, +}; + +static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK; + + if (parent == &clk_xtal) + clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL; + else if (parent == &clk_ext) + clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK; + else if (parent != &clk_mpllref) + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_epllref = { + .name = "epllref", + .id = -1, + .set_parent = s3c2443_setparent_epllref, +}; + +static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV0); + + div &= S3C2443_CLKDIV0_EXTDIV_MASK; + div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ + + return parent_rate / (div + 1); +} + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_mpllref, + .id = -1, + .get_rate = s3c2443_getrate_mdivclk, +}; + + +static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL | + S3C2443_CLKSRC_EXTCLK_DIV); + + if (parent == &clk_mpll) + clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL; + else if (parent == &clk_mdivclk) + clksrc |= S3C2443_CLKSRC_EXTCLK_DIV; + else if (parent != &clk_mpllref) + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_msysclk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + .set_parent = s3c2443_setparent_msysclk, +}; + + +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ + +static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + if (parent == &clk_epll) + clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL; + else if (parent == &clk_epllref) + clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL; + else + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_esysclk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + .set_parent = s3c2443_setparent_esysclk, +}; + +/* uartclk + * + * UART baud-rate clock sourced from esysclk via a divisor +*/ + +static unsigned long s3c2443_getrate_uart(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_UARTDIV_MASK; + div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT; + + return parent_rate / (div + 1); +} + + +static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_uart = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_uart, + .set_rate = s3c2443_setrate_uart, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* hsspi + * + * high-speed spi clock, sourced from esysclk +*/ + +static unsigned long s3c2443_getrate_hsspi(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_HSSPIDIV_MASK; + div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT; + + return parent_rate / (div + 1); +} + + +static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_hsspi = { + .name = "hsspi", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_HSSPICLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_hsspi, + .set_rate = s3c2443_setrate_hsspi, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +/* usbhost + * + * usb host bus-clock, usually 48MHz to provide USB bus clock timing +*/ + +static unsigned long s3c2443_getrate_usbhost(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK; + div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +struct clk clk_usb_bus_host = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_usbhost, + .set_rate = s3c2443_setrate_usbhost, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +/* clk_hsmcc_div + * + * this clock is sourced from epll, and is fed through a divider, + * to a mux controlled by sclkcon where either it or a extclk can + * be fed to the hsmmc block +*/ + +static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_HSMMCDIV_MASK; + div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_hsmmc_div = { + .name = "hsmmc-div", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_hsmmc_div, + .set_rate = s3c2443_setrate_hsmmc_div, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); + + clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | + S3C2443_SCLKCON_HSMMCCLK_EPLL); + + if (parent == &clk_epll) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; + else if (parent == &clk_ext) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; + else + return -EINVAL; + + if (clk->usage > 0) { + __raw_writel(clksrc, S3C2443_SCLKCON); + } + + clk->parent = parent; + return 0; +} + +static int s3c2443_enable_hsmmc(struct clk *clk, int enable) +{ + return s3c2443_setparent_hsmmc(clk, clk->parent); +} + +static struct clk clk_hsmmc = { + .name = "hsmmc-if", + .id = -1, + .parent = &clk_hsmmc_div, + .enable = s3c2443_enable_hsmmc, + .set_parent = s3c2443_setparent_hsmmc, +}; + +/* i2s_eplldiv + * + * this clock is the output from the i2s divisor of esysclk +*/ + +static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_I2SDIV_MASK; + div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_i2s_eplldiv = { + .name = "i2s-eplldiv", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_i2s_eplldiv, + .set_rate = s3c2443_setrate_i2s_eplldiv, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref +*/ + +static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~S3C2443_CLKSRC_I2S_MASK; + + if (parent == &clk_epllref) + clksrc |= S3C2443_CLKSRC_I2S_EPLLREF; + else if (parent == &clk_i2s_ext) + clksrc |= S3C2443_CLKSRC_I2S_EXT; + else if (parent != &clk_i2s_eplldiv) + return -EINVAL; + + clk->parent = parent; + __raw_writel(clksrc, S3C2443_CLKSRC); + + return 0; +} + +static struct clk clk_i2s = { + .name = "i2s-if", + .id = -1, + .parent = &clk_i2s_eplldiv, + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + .set_parent = s3c2443_setparent_i2s, +}; + +/* cam-if + * + * camera interface bus-clock, divided down from esysclk +*/ + +static unsigned long s3c2443_getrate_cam(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_CAMDIV_MASK; + div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK; + clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT; + + __raw_writel(clkdiv1, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_cam = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_cam, + .set_rate = s3c2443_setrate_cam, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* display-if + * + * display interface clock, divided from esysclk +*/ + +static unsigned long s3c2443_getrate_display(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_DISPDIV_MASK; + div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_display(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc256(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_display = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_display, + .set_rate = s3c2443_setrate_display, + .round_rate = s3c2443_roundrate_clksrc256, +}; + +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI1, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA3, + }, { + .name = "dma", + .id = 4, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA4, + }, { + .name = "dma", + .id = 5, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA5, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_WDT, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus_host, + } +}; + +/* clocks to add where we need to check their parentage */ + +/* s3c2443_clk_initparents + * + * Initialise the parents for the clocks that we get at start-time +*/ + +static int __init clk_init_set_parent(struct clk *clk, struct clk *parent) +{ + printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name); + return clk_set_parent(clk, parent); +} + +static void __init s3c2443_clk_initparents(void) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + struct clk *parent; + + switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) { + case S3C2443_CLKSRC_EPLLREF_EXTCLK: + parent = &clk_ext; + break; + + case S3C2443_CLKSRC_EPLLREF_XTAL: + default: + parent = &clk_xtal; + break; + + case S3C2443_CLKSRC_EPLLREF_MPLLREF: + case S3C2443_CLKSRC_EPLLREF_MPLLREF2: + parent = &clk_mpllref; + break; + } + + clk_init_set_parent(&clk_epllref, parent); + + switch (clksrc & S3C2443_CLKSRC_I2S_MASK) { + case S3C2443_CLKSRC_I2S_EXT: + parent = &clk_i2s_ext; + break; + + case S3C2443_CLKSRC_I2S_EPLLDIV: + default: + parent = &clk_i2s_eplldiv; + break; + + case S3C2443_CLKSRC_I2S_EPLLREF: + case S3C2443_CLKSRC_I2S_EPLLREF3: + parent = &clk_epllref; + } + + clk_init_set_parent(&clk_i2s, &clk_epllref); + + /* esysclk source */ + + parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ? + &clk_epll : &clk_epllref; + + clk_init_set_parent(&clk_esysclk, parent); + + /* msysclk source */ + + if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) { + parent = &clk_mpll; + } else { + parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ? + &clk_mdivclk : &clk_mpllref; + } + + clk_init_set_parent(&clk_msysclk, parent); +} + +/* armdiv divisor table */ + +static unsigned int armdiv[16] = { + [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, + [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, + [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, + [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, + [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, + [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, + [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, + [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, +}; + +static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return clkcon0 + 1; +} + +/* clocks to add straight away */ + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_usb_bus_host, + &clk_usb_bus, + &clk_esysclk, + &clk_epllref, + &clk_mpllref, + &clk_msysclk, + &clk_uart, + &clk_display, + &clk_cam, + &clk_i2s_eplldiv, + &clk_i2s, + &clk_hsspi, + &clk_hsmmc_div, + &clk_hsmmc, +}; + +void __init s3c2443_init_clocks(int xtal) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + struct clk *clkp; + int ret; + int ptr; + + pll = s3c2443_get_mpll(mpllcon, xtal); + + fclk = pll / s3c2443_fclk_div(clkdiv0); + hclk = fclk / s3c2443_get_prediv(clkdiv0); + hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + + s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + + printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + + s3c2443_clk_initparents(); + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { + clkp = clks[ptr]; + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + + clk_usb_bus.parent = &clk_usb_bus_host; + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); + clk_set_rate(&clk_usb_bus_host, 48*1000*1000); + } + + printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_epll)), + print_mhz(clk_get_rate(&clk_usb_bus))); + + /* register clocks from clock array */ + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } +} diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c new file mode 100644 index 0000000..f70e8cc --- /dev/null +++ b/arch/arm/mach-s3c2443/dma.c @@ -0,0 +1,180 @@ +/* linux/arch/arm/mach-s3c2443/dma.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include <asm/io.h> + +#include <asm/plat-s3c24xx/dma.h> +#include <asm/plat-s3c24xx/cpu.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +#define MAP(x) { \ + [0] = (x) | DMA_CH_VALID, \ + [1] = (x) | DMA_CH_VALID, \ + [2] = (x) | DMA_CH_VALID, \ + [3] = (x) | DMA_CH_VALID, \ + [4] = (x) | DMA_CH_VALID, \ + [5] = (x) | DMA_CH_VALID, \ + } + +static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels = MAP(S3C2443_DMAREQSEL_XDREQ0), + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels = MAP(S3C2443_DMAREQSEL_XDREQ1), + }, + [DMACH_SDI] = { + .name = "sdi", + .channels = MAP(S3C2443_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels = MAP(S3C2443_DMAREQSEL_UART0_0), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels = MAP(S3C2443_DMAREQSEL_UART1_0), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels = MAP(S3C2443_DMAREQSEL_UART2_0), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART3] = { + .name = "uart3", + .channels = MAP(S3C2443_DMAREQSEL_UART3_0), + .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, + .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, + }, + [DMACH_UART0_SRC2] = { + .name = "uart0", + .channels = MAP(S3C2443_DMAREQSEL_UART0_1), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1_SRC2] = { + .name = "uart1", + .channels = MAP(S3C2443_DMAREQSEL_UART1_1), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2_SRC2] = { + .name = "uart2", + .channels = MAP(S3C2443_DMAREQSEL_UART2_1), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART3_SRC2] = { + .name = "uart3", + .channels = MAP(S3C2443_DMAREQSEL_UART3_1), + .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, + .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels = MAP(S3C2443_DMAREQSEL_TIMER), + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels = MAP(S3C2443_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels = MAP(S3C2443_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels = MAP(S3C2443_DMAREQSEL_PCMIN), + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels = MAP(S3C2443_DMAREQSEL_MICIN), + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, +}; + +static void s3c2443_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + writel(map->channels[0] | S3C2443_DMAREQSEL_HW, + chan->regs + S3C2443_DMA_DMAREQSEL); +} + +static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { + .select = s3c2443_dma_select, + .dcon_mask = 0, + .map = s3c2443_dma_mappings, + .map_size = ARRAY_SIZE(s3c2443_dma_mappings), +}; + +static int s3c2443_dma_add(struct sys_device *sysdev) +{ + s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); + return s3c24xx_dma_init_map(&s3c2443_dma_sel); +} + +static struct sysdev_driver s3c2443_dma_driver = { + .add = s3c2443_dma_add, +}; + +static int __init s3c2443_dma_init(void) +{ + return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver); +} + +arch_initcall(s3c2443_dma_init); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c new file mode 100644 index 0000000..7a45b6d --- /dev/null +++ b/arch/arm/mach-s3c2443/irq.c @@ -0,0 +1,290 @@ +/* linux/arch/arm/mach-s3c2443/irq.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/regs-gpio.h> + +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> +#include <asm/plat-s3c24xx/irq.h> + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + struct irq_desc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + mydesc = irq_desc + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + desc_handle_irq(irq, mydesc); + + mydesc++; + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2443_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2443_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDTAC97); +} + +static void s3c2443_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2443_irq_wdtac97 = { + .mask = s3c2443_irq_wdtac97_mask, + .unmask = s3c2443_irq_wdtac97_unmask, + .ack = s3c2443_irq_wdtac97_ack, +}; + + +/* LCD sub interrupts */ + +static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2443_irq_lcd_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2443_irq_lcd_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_LCD); +} + +static void s3c2443_irq_lcd_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2443_irq_lcd = { + .mask = s3c2443_irq_lcd_mask, + .unmask = s3c2443_irq_lcd_unmask, + .ack = s3c2443_irq_lcd_ack, +}; + + +/* DMA sub interrupts */ + +static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + + +static void s3c2443_irq_dma_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2443_irq_dma_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_DMA); +} + +static void s3c2443_irq_dma_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2443_irq_dma = { + .mask = s3c2443_irq_dma_mask, + .unmask = s3c2443_irq_dma_unmask, + .ack = s3c2443_irq_dma_ack, +}; + + +/* UART3 sub interrupts */ + +static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_UART3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + + +static void s3c2443_irq_uart3_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2443_irq_uart3_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART3); +} + +static void s3c2443_irq_uart3_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2443_irq_uart3 = { + .mask = s3c2443_irq_uart3_mask, + .unmask = s3c2443_irq_uart3_unmask, + .ack = s3c2443_irq_uart3_ack, +}; + + +/* CAM sub interrupts */ + +static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4); +} + +#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) +#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P) + +static void s3c2443_irq_cam_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM); +} + +static void s3c2443_irq_cam_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_CAM); +} + +static void s3c2443_irq_cam_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM); +} + +static struct irq_chip s3c2443_irq_cam = { + .mask = s3c2443_irq_cam_mask, + .unmask = s3c2443_irq_cam_unmask, + .ack = s3c2443_irq_cam_ack, +}; + +/* IRQ initialisation code */ + +static int __init s3c2443_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + set_irq_chip(base, &s3c_irq_level_chip); + set_irq_handler(base, handle_level_irq); + set_irq_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + set_irq_chip(irqno, chip); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int s3c2443_irq_add(struct sys_device *sysdev) +{ + printk("S3C2443: IRQ Support\n"); + + s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam, + IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P); + + s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd, + IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4); + + s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma, + &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3, + &s3c2443_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97, + &s3c2443_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2443_irq_driver = { + .add = s3c2443_irq_add, +}; + +static int s3c2443_irq_init(void) +{ + return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver); +} + +arch_initcall(s3c2443_irq_init); + diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c new file mode 100644 index 0000000..e82aaff --- /dev/null +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -0,0 +1,137 @@ +/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://www.fluff.org/ben/smdk2443/ + * + * Thanks to Samsung for the loan of an SMDK2443 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/idle.h> +#include <asm/arch/fb.h> + +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2440.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> + +#include <asm/plat-s3c24xx/common-smdk.h> + +static struct map_desc smdk2443_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0x51, + } +}; + +static struct platform_device *smdk2443_devices[] __initdata = { + &s3c_device_wdt, + &s3c_device_i2c, +}; + +static struct s3c24xx_board smdk2443_board __initdata = { + .devices = smdk2443_devices, + .devices_count = ARRAY_SIZE(smdk2443_devices) +}; + +static void __init smdk2443_map_io(void) +{ + s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + s3c24xx_set_board(&smdk2443_board); +} + +static void __init smdk2443_machine_init(void) +{ + smdk_machine_init(); +} + +MACHINE_START(SMDK2443, "SMDK2443") + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2443_map_io, + .init_machine = smdk2443_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c new file mode 100644 index 0000000..11b1d0b --- /dev/null +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -0,0 +1,97 @@ +/* linux/arch/arm/mach-s3c2443/s3c2443.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C2443 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/sysdev.h> +#include <linux/clk.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/regs-s3c2443-clock.h> +#include <asm/arch/reset.h> + +#include <asm/plat-s3c24xx/s3c2443.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> + +static struct map_desc s3c2443_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2443_sysclass = { + set_kset_name("s3c2443-core"), +}; + +static struct sys_device s3c2443_sysdev = { + .cls = &s3c2443_sysclass, +}; + +static void s3c2443_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2443_init(void) +{ + printk("S3C2443: Initialising architecture\n"); + + s3c24xx_reset_hook = s3c2443_hard_reset; + + s3c_device_nand.name = "s3c2412-nand"; + + return sysdev_register(&s3c2443_sysdev); +} + +void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); +} + +/* s3c2443_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size) +{ + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); + iotable_init(mach_desc, mach_size); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2443 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2443_core_init(void) +{ + return sysdev_class_register(&s3c2443_sysclass); +} + +core_initcall(s3c2443_core_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index aade2f7..4b27719 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -171,8 +171,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT @@ -609,3 +609,10 @@ config NEEDS_SYSCALL_FOR_CMPXCHG Forget about fast user space cmpxchg support. It is just not possible. +config OUTER_CACHE + bool + default n + +config CACHE_L2X0 + bool + select OUTER_CACHE diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index d2f5672..2f8b959 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -66,3 +66,5 @@ obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_V6) += proc-v6.o + +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c new file mode 100644 index 0000000..08a36f1 --- /dev/null +++ b/arch/arm/mm/cache-l2x0.c @@ -0,0 +1,104 @@ +/* + * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> + +#include <asm/cacheflush.h> +#include <asm/io.h> +#include <asm/hardware/cache-l2x0.h> + +#define CACHE_LINE_SIZE 32 + +static void __iomem *l2x0_base; + +static inline void sync_writel(unsigned long val, unsigned long reg, + unsigned long complete_mask) +{ + writel(val, l2x0_base + reg); + /* wait for the operation to complete */ + while (readl(l2x0_base + reg) & complete_mask) + ; +} + +static inline void cache_sync(void) +{ + sync_writel(0, L2X0_CACHE_SYNC, 1); +} + +static inline void l2x0_inv_all(void) +{ + /* invalidate all ways */ + sync_writel(0xff, L2X0_INV_WAY, 0xff); + cache_sync(); +} + +static void l2x0_inv_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_INV_LINE_PA, 1); + cache_sync(); +} + +static void l2x0_clean_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_CLEAN_LINE_PA, 1); + cache_sync(); +} + +static void l2x0_flush_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + + start &= ~(CACHE_LINE_SIZE - 1); + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) + sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1); + cache_sync(); +} + +void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) +{ + __u32 aux; + + l2x0_base = base; + + /* disable L2X0 */ + writel(0, l2x0_base + L2X0_CTRL); + + aux = readl(l2x0_base + L2X0_AUX_CTRL); + aux &= aux_mask; + aux |= aux_val; + writel(aux, l2x0_base + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + /* enable L2X0 */ + writel(1, l2x0_base + L2X0_CTRL); + + outer_cache.inv_range = l2x0_inv_range; + outer_cache.clean_range = l2x0_clean_range; + outer_cache.flush_range = l2x0_flush_range; + + printk(KERN_INFO "L2X0 cache controller enabled\n"); +} diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 6a9c362..1f9f94f 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -205,9 +205,10 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, * kernel direct-mapped region for device DMA. */ { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - dmac_flush_range(kaddr, kaddr + size); + void *ptr = page_address(page); + memset(ptr, 0, size); + dmac_flush_range(ptr, ptr + size); + outer_flush_range(__pa(ptr), __pa(ptr) + size); } /* @@ -480,20 +481,24 @@ core_initcall(consistent_init); * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ -void consistent_sync(void *vaddr, size_t size, int direction) +void consistent_sync(const void *start, size_t size, int direction) { - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; + const void *end = start + size; + + BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1)); switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ dmac_inv_range(start, end); + outer_inv_range(__pa(start), __pa(end)); break; case DMA_TO_DEVICE: /* writeback only */ dmac_clean_range(start, end); + outer_clean_range(__pa(start), __pa(end)); break; case DMA_BIDIRECTIONAL: /* writeback and invalidate */ dmac_flush_range(start, end); + outer_flush_range(__pa(start), __pa(end)); break; default: BUG(); diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 79e8002..9da43a0 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -19,7 +19,8 @@ unsigned int cpu_last_asid = { 1 << ASID_BITS }; /* * We fork()ed a process, and we need a new context for the child * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. + * always allocate an ASID. The ASID 0 is reserved for the TTBR + * register changing sequence. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -38,8 +39,15 @@ void __new_context(struct mm_struct *mm) * If we've used up all our ASIDs, we need * to start a new version and flush the TLB. */ - if ((asid & ~ASID_MASK) == 0) + if ((asid & ~ASID_MASK) == 0) { + asid = ++cpu_last_asid; + /* set the reserved ASID before flushing the TLB */ + asm("mcr p15, 0, %0, c13, c0, 1 @ set reserved context ID\n" + : + : "r" (0)); + isb(); flush_tlb_all(); + } mm->context.id = asid; } diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index cf95c5d..44558d5 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -119,8 +119,6 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigne flush_cache_page(vma, addr, pfn); } -void __flush_dcache_page(struct address_space *mapping, struct page *page); - /* * Take care of architecture specific things when placing a new PTE into * a page table, or changing an existing PTE. Basically, there are two diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 655c837..94fd4bf 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -49,8 +49,10 @@ pmd_t *top_pmd; static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; static unsigned int ecc_mask __initdata = 0; +pgprot_t pgprot_user; pgprot_t pgprot_kernel; +EXPORT_SYMBOL(pgprot_user); EXPORT_SYMBOL(pgprot_kernel); struct cachepolicy { @@ -345,6 +347,7 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); } + pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | L_PTE_EXEC | kern_pgprot); diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 7b1843b..eb42e5b 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -14,10 +14,13 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/elf.h> -#include <asm/hardware/arm_scu.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> +#ifdef CONFIG_SMP +#include <asm/hardware/arm_scu.h> +#endif + #include "proc-macros.S" #define D_CACHE_LINE_SIZE 32 @@ -30,6 +33,12 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) +#ifndef CONFIG_SMP +#define TTB_FLAGS TTB_RGN_WBWA +#else +#define TTB_FLAGS TTB_RGN_WBWA|TTB_S +#endif + ENTRY(cpu_v6_proc_init) mov pc, lr @@ -92,9 +101,7 @@ ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id -#ifdef CONFIG_SMP - orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable -#endif + orr r0, r0, #TTB_FLAGS mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -183,8 +190,7 @@ __v6_setup: /* Set up the SCU on core 0 only */ mrc p15, 0, r0, c0, c0, 5 @ CPU core number ands r0, r0, #15 - moveq r0, #0x10000000 @ SCU_BASE - orreq r0, r0, #0x00100000 + ldreq r0, =SCU_BASE ldreq r5, [r0, #SCU_CTRL] orreq r5, r5, #1 streq r5, [r0, #SCU_CTRL] @@ -204,9 +210,7 @@ __v6_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register -#ifdef CONFIG_SMP - orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable -#endif + orr r4, r4, #TTB_FLAGS mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 94a5845..d95921a 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -5,23 +5,23 @@ * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> * * Copyright 2004 (C) Intel Corp. - * Copyright 2005 (c) MontaVista Software, Inc. + * Copyright 2005 (C) MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an - * extension to Intel's original XScale core that adds the following + * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is + * an extension to Intel's original XScale core that adds the following * features: * * - ARMv6 Supersections * - Low Locality Reference pages (replaces mini-cache) * - 36-bit addressing * - L2 cache - * - Cache-coherency if chipset supports it + * - Cache coherency if chipset supports it * - * Based on orignal XScale code by Nicolas Pitre + * Based on original XScale code by Nicolas Pitre. */ #include <linux/linkage.h> @@ -42,12 +42,12 @@ #define MAX_AREA_SIZE 32768 /* - * The cache line size of the I and D cache. + * The cache line size of the L1 I, L1 D and unified L2 cache. */ #define CACHELINESIZE 32 /* - * The size of the data cache. + * The size of the L1 D cache. */ #define CACHESIZE 32768 @@ -57,9 +57,9 @@ #define L2_CACHE_ENABLE 1 /* - * This macro is used to wait for a CP15 write and is needed - * when we have to ensure that the last operation to the co-pro - * was completed before continuing with operation. + * This macro is used to wait for a CP15 write and is needed when we + * have to ensure that the last operation to the coprocessor was + * completed before continuing with operation. */ .macro cpwait_ret, lr, rd mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 @@ -68,13 +68,13 @@ .endm /* - * This macro cleans & invalidates the entire xsc3 dcache by set & way. + * This macro cleans and invalidates the entire L1 D cache. */ .macro clean_d_cache rd, rs mov \rd, #0x1f00 orr \rd, \rd, #0x00e0 -1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way +1: mcr p15, 0, \rd, c7, c14, 2 @ clean/invalidate L1 D line adds \rd, \rd, #0x40000000 bcc 1b subs \rd, \rd, #0x20 @@ -119,15 +119,15 @@ ENTRY(cpu_xsc3_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR mrc p15, 0, r1, c1, c0, 0 @ ctrl register - bic r1, r1, #0x0086 @ ........B....CA. bic r1, r1, #0x3900 @ ..VIZ..S........ + bic r1, r1, #0x0086 @ ........B....CA. mcr p15, 0, r1, c1, c0, 0 @ ctrl register - mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB + mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB bic r1, r1, #0x0001 @ ...............M mcr p15, 0, r1, c1, c0, 0 @ ctrl register @ CAUTION: MMU turned off from this point. We count on the pipeline @ already containing those two last instructions to survive. - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs mov pc, r0 /* @@ -139,14 +139,12 @@ ENTRY(cpu_xsc3_reset) * * XScale supports clock switching, but using idle mode support * allows external hardware to react to system state changes. - - MMG: Come back to this one. */ .align 5 ENTRY(cpu_xsc3_do_idle) mov r0, #1 - mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE + mcr p14, 0, r0, c7, c0, 0 @ go to idle mov pc, lr /* ================================= CACHE ================================ */ @@ -171,9 +169,9 @@ ENTRY(xsc3_flush_kern_cache_all) __flush_whole_cache: clean_d_cache r0, r1 tst r2, #VM_EXEC - mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB - mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer - mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcrne p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB + mcrne p15, 0, ip, c7, c10, 4 @ data write barrier + mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush mov pc, lr /* @@ -194,21 +192,21 @@ ENTRY(xsc3_flush_user_cache_range) bhs __flush_whole_cache 1: tst r2, #VM_EXEC - mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line - mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line + mcrne p15, 0, r0, c7, c5, 1 @ invalidate L1 I line + mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b tst r2, #VM_EXEC - mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB - mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer - mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ data write barrier + mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush mov pc, lr /* * coherent_kern_range(start, end) * - * Ensure coherency between the Icache and the Dcache in the + * Ensure coherency between the I cache and the D cache in the * region described by start. If you have non-snooping * Harvard caches, you need to implement this function. * @@ -222,34 +220,34 @@ ENTRY(xsc3_coherent_kern_range) /* FALLTHROUGH */ ENTRY(xsc3_coherent_user_range) bic r0, r0, #CACHELINESIZE - 1 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB - mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer - mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c5, 4 @ prefetch flush mov pc, lr /* * flush_kern_dcache_page(void *page) * * Ensure no D cache aliasing occurs, either with itself or - * the I cache + * the I cache. * * - addr - page aligned address */ ENTRY(xsc3_flush_kern_dcache_page) add r1, r0, #PAGE_SZ -1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line +1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB - mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer - mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c5, 4 @ prefetch flush mov pc, lr /* @@ -266,17 +264,17 @@ ENTRY(xsc3_flush_kern_dcache_page) ENTRY(xsc3_dma_inv_range) tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 - mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry - mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry + mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line + mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line tst r1, #CACHELINESIZE - 1 - mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry - mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry -1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry - mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line + mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line + mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b - mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c10, 4 @ data write barrier mov pc, lr /* @@ -289,12 +287,12 @@ ENTRY(xsc3_dma_inv_range) */ ENTRY(xsc3_dma_clean_range) bic r0, r0, #CACHELINESIZE - 1 -1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry - mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line + mcr p15, 1, r0, c7, c11, 1 @ clean L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b - mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c10, 4 @ data write barrier mov pc, lr /* @@ -307,13 +305,13 @@ ENTRY(xsc3_dma_clean_range) */ ENTRY(xsc3_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 -1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line - mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line - mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line +1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line + mcr p15, 1, r0, c7, c11, 1 @ clean L2 line + mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b - mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c10, 4 @ data write barrier mov pc, lr ENTRY(xsc3_cache_fns) @@ -328,7 +326,7 @@ ENTRY(xsc3_cache_fns) .long xsc3_dma_flush_range ENTRY(cpu_xsc3_dcache_clean_area) -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b @@ -346,14 +344,14 @@ ENTRY(cpu_xsc3_dcache_clean_area) .align 5 ENTRY(cpu_xsc3_switch_mm) clean_d_cache r1, r2 - mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB - mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer - mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB + mcr p15, 0, ip, c7, c10, 4 @ data write barrier + mcr p15, 0, ip, c7, c5, 4 @ prefetch flush #ifdef L2_CACHE_ENABLE orr r0, r0, #0x18 @ cache the page table in L2 #endif mcr p15, 0, r0, c2, c0, 0 @ load page table pointer - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs cpwait_ret lr, ip /* @@ -366,34 +364,34 @@ ENTRY(cpu_xsc3_switch_mm) ENTRY(cpu_xsc3_set_pte_ext) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0xff0 @ Keep C, B bits + bic r2, r1, #0xff0 @ keep C, B bits orr r2, r2, #PTE_TYPE_EXT @ extended page - tst r1, #L_PTE_SHARED @ Shared? + tst r1, #L_PTE_SHARED @ shared? orrne r2, r2, #0x200 eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY - tst r3, #L_PTE_USER @ User? + tst r3, #L_PTE_USER @ user? orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w - tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty? orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w #if L2_CACHE_ENABLE - @ If its cacheable it needs to be in L2 also. + @ If it's cacheable, it needs to be in L2 also. eor ip, r1, #L_PTE_CACHEABLE tst ip, #L_PTE_CACHEABLE orreq r2, r2, #PTE_EXT_TEX(0x5) #endif - tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault str r2, [r0] @ hardware version mov ip, #0 - mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr - mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line + mcr p15, 0, ip, c7, c10, 4 @ data write barrier mov pc, lr .ltorg @@ -406,17 +404,18 @@ ENTRY(cpu_xsc3_set_pte_ext) __xsc3_setup: mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r0 - mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB - mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer - mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush - mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs + mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB + mcr p15, 0, ip, c7, c10, 4 @ data write barrier + mcr p15, 0, ip, c7, c5, 4 @ prefetch flush + mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs #if L2_CACHE_ENABLE orr r4, r4, #0x18 @ cache the page table in L2 #endif mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - mov r0, #1 @ Allow access to CP0 and CP13 - orr r0, r0, #1 << 13 @ Its undefined whether this - mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + + mov r0, #0 @ don't allow CP access + mcr p15, 0, r0, c15, c1, 0 @ write CP access register + mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg and r0, r0, #2 @ preserve bit P bit setting #if L2_CACHE_ENABLE @@ -427,9 +426,9 @@ __xsc3_setup: adr r5, xsc3_crval ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ get control register - bic r0, r0, r5 @ .... .... .... ..A. - orr r0, r0, r6 @ .... .... .... .C.M - orr r0, r0, #0x00000800 @ ..VI Z..S .... .... + bic r0, r0, r5 @ ..V. ..R. .... ..A. + orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) + @ ...I Z..S .... .... (uc) #if L2_CACHE_ENABLE orr r0, r0, #0x04000000 @ L2 enable #endif @@ -439,7 +438,7 @@ __xsc3_setup: .type xsc3_crval, #object xsc3_crval: - crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100 + crval clear=0x04002202, mmuset=0x00003905, ucset=0x00001900 __INITDATA @@ -474,7 +473,7 @@ cpu_elf_name: .type cpu_xsc3_name, #object cpu_xsc3_name: - .asciz "XScale-Core3" + .asciz "XScale-V3 based processor" .size cpu_xsc3_name, . - cpu_xsc3_name .align @@ -490,7 +489,7 @@ __xsc3_proc_info: PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ + .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ b __xsc3_setup diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index fd6adde..20f84bb 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -53,6 +53,8 @@ ENTRY(v6wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB + mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier mov pc, lr /* @@ -80,7 +82,9 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier + mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr .section ".text.init", #alloc, #execinstr diff --git a/arch/arm/oprofile/Kconfig b/arch/arm/oprofile/Kconfig index 19d3773..afd93ad 100644 --- a/arch/arm/oprofile/Kconfig +++ b/arch/arm/oprofile/Kconfig @@ -19,5 +19,24 @@ config OPROFILE If unsure, say N. +if OPROFILE + +config OPROFILE_ARMV6 + bool + depends on CPU_V6 && !SMP + default y + select OPROFILE_ARM11_CORE + +config OPROFILE_MPCORE + bool + depends on CPU_V6 && SMP + default y + select OPROFILE_ARM11_CORE + +config OPROFILE_ARM11_CORE + bool + +endif + endmenu diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index 6a94e54..e61d0cc 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -8,4 +8,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o - +oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o +oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o +oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 6f83335..0a007b9 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -135,6 +135,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) spec = &op_xscale_spec; #endif +#ifdef CONFIG_OPROFILE_ARMV6 + spec = &op_armv6_spec; +#endif + +#ifdef CONFIG_OPROFILE_MPCORE + spec = &op_mpcore_spec; +#endif + if (spec) { ret = spec->init(); if (ret < 0) diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 38c6ad1..4899c62 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -24,6 +24,9 @@ struct op_arm_model_spec { extern struct op_arm_model_spec op_xscale_spec; #endif +extern struct op_arm_model_spec op_armv6_spec; +extern struct op_arm_model_spec op_mpcore_spec; + extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c new file mode 100644 index 0000000..ad80752 --- /dev/null +++ b/arch/arm/oprofile/op_model_arm11_core.c @@ -0,0 +1,162 @@ +/** + * @file op_model_arm11_core.c + * ARM11 Event Monitor Driver + * @remark Copyright 2004 ARM SMP Development Team + */ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/oprofile.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/smp.h> + +#include "op_counter.h" +#include "op_arm_model.h" +#include "op_model_arm11_core.h" + +/* + * ARM11 PMU support + */ +static inline void arm11_write_pmnc(u32 val) +{ + /* upper 4bits and 7, 11 are write-as-0 */ + val &= 0x0ffff77f; + asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val)); +} + +static inline u32 arm11_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val)); + return val; +} + +static void arm11_reset_counter(unsigned int cnt) +{ + u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count; + switch (cnt) { + case CCNT: + asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val)); + break; + + case PMN0: + asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val)); + break; + + case PMN1: + asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val)); + break; + } +} + +int arm11_setup_pmu(void) +{ + unsigned int cnt; + u32 pmnc; + + if (arm11_read_pmnc() & PMCR_E) { + printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id()); + return -EBUSY; + } + + /* initialize PMNC, reset overflow, D bit, C bit and P bit. */ + arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT | + PMCR_C | PMCR_P); + + for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) { + unsigned long event; + + if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled) + continue; + + event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255; + + /* + * Set event (if destined for PMNx counters) + */ + if (cnt == PMN0) { + pmnc |= event << 20; + } else if (cnt == PMN1) { + pmnc |= event << 12; + } + + /* + * We don't need to set the event if it's a cycle count + * Enable interrupt for this counter + */ + pmnc |= PMCR_IEN_PMN0 << cnt; + arm11_reset_counter(cnt); + } + arm11_write_pmnc(pmnc); + + return 0; +} + +int arm11_start_pmu(void) +{ + arm11_write_pmnc(arm11_read_pmnc() | PMCR_E); + return 0; +} + +int arm11_stop_pmu(void) +{ + unsigned int cnt; + + arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E); + + for (cnt = PMN0; cnt <= CCNT; cnt++) + arm11_reset_counter(cnt); + + return 0; +} + +/* + * CPU counters' IRQ handler (one IRQ per CPU) + */ +static irqreturn_t arm11_pmu_interrupt(int irq, void *arg) +{ + struct pt_regs *regs = get_irq_regs(); + unsigned int cnt; + u32 pmnc; + + pmnc = arm11_read_pmnc(); + + for (cnt = PMN0; cnt <= CCNT; cnt++) { + if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) { + arm11_reset_counter(cnt); + oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt)); + } + } + /* Clear counter flag(s) */ + arm11_write_pmnc(pmnc); + return IRQ_HANDLED; +} + +int arm11_request_interrupts(int *irqs, int nr) +{ + unsigned int i; + int ret = 0; + + for(i = 0; i < nr; i++) { + ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL); + if (ret != 0) { + printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n", + irqs[i]); + break; + } + } + + if (i != nr) + while (i-- != 0) + free_irq(irqs[i], NULL); + + return ret; +} + +void arm11_release_interrupts(int *irqs, int nr) +{ + unsigned int i; + + for (i = 0; i < nr; i++) + free_irq(irqs[i], NULL); +} diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h new file mode 100644 index 0000000..6f8538e --- /dev/null +++ b/arch/arm/oprofile/op_model_arm11_core.h @@ -0,0 +1,45 @@ +/** + * @file op_model_arm11_core.h + * ARM11 Event Monitor Driver + * @remark Copyright 2004 ARM SMP Development Team + * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> + * @remark Copyright 2000-2004 MontaVista Software Inc + * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> + * @remark Copyright 2004 Intel Corporation + * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> + * @remark Copyright 2004 Oprofile Authors + * + * @remark Read the file COPYING + * + * @author Zwane Mwaikambo + */ +#ifndef OP_MODEL_ARM11_CORE_H +#define OP_MODEL_ARM11_CORE_H + +/* + * Per-CPU PMCR + */ +#define PMCR_E (1 << 0) /* Enable */ +#define PMCR_P (1 << 1) /* Count reset */ +#define PMCR_C (1 << 2) /* Cycle counter reset */ +#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */ +#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */ +#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */ +#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */ +#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */ +#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */ +#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */ + +#define PMN0 0 +#define PMN1 1 +#define CCNT 2 + +#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter)) + +int arm11_setup_pmu(void); +int arm11_start_pmu(void); +int arm11_stop_pmu(void); +int arm11_request_interrupts(int *, int); +void arm11_release_interrupts(int *, int); + +#endif diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c new file mode 100644 index 0000000..8985007 --- /dev/null +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -0,0 +1,296 @@ +/** + * @file op_model_mpcore.c + * MPCORE Event Monitor Driver + * @remark Copyright 2004 ARM SMP Development Team + * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> + * @remark Copyright 2000-2004 MontaVista Software Inc + * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> + * @remark Copyright 2004 Intel Corporation + * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> + * @remark Copyright 2004 Oprofile Authors + * + * @remark Read the file COPYING + * + * @author Zwane Mwaikambo + * + * Counters: + * 0: PMN0 on CPU0, per-cpu configurable event counter + * 1: PMN1 on CPU0, per-cpu configurable event counter + * 2: CCNT on CPU0 + * 3: PMN0 on CPU1 + * 4: PMN1 on CPU1 + * 5: CCNT on CPU1 + * 6: PMN0 on CPU1 + * 7: PMN1 on CPU1 + * 8: CCNT on CPU1 + * 9: PMN0 on CPU1 + * 10: PMN1 on CPU1 + * 11: CCNT on CPU1 + * 12-19: configurable SCU event counters + */ + +/* #define DEBUG */ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/oprofile.h> +#include <linux/interrupt.h> +#include <linux/smp.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> +#include <asm/hardware.h> +#include <asm/system.h> + +#include "op_counter.h" +#include "op_arm_model.h" +#include "op_model_arm11_core.h" +#include "op_model_mpcore.h" + +/* + * MPCore SCU event monitor support + */ +#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10) + +/* + * Bitmask of used SCU counters + */ +static unsigned int scu_em_used; + +/* + * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number) + */ +static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n) +{ + writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]); +} + +static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event) +{ + event &= 0xff; + writeb(event, &emc->MCEB[n]); +} + +/* + * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU) + */ +static irqreturn_t scu_em_interrupt(int irq, void *arg) +{ + struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; + unsigned int cnt; + + cnt = irq - IRQ_PMU_SCU0; + oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt)); + scu_reset_counter(emc, cnt); + + /* Clear overflow flag for this counter */ + writel(1 << (cnt + 16), &emc->PMCR); + + return IRQ_HANDLED; +} + +/* Configure just the SCU counters that the user has requested */ +static void scu_setup(void) +{ + struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; + unsigned int i; + + scu_em_used = 0; + + for (i = 0; i < NUM_SCU_COUNTERS; i++) { + if (counter_config[SCU_COUNTER(i)].enabled && + counter_config[SCU_COUNTER(i)].event) { + scu_set_event(emc, i, 0); /* disable counter for now */ + scu_em_used |= 1 << i; + } + } +} + +static int scu_start(void) +{ + struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; + unsigned int temp, i; + unsigned long event; + int ret = 0; + + /* + * request the SCU counter interrupts that we need + */ + for (i = 0; i < NUM_SCU_COUNTERS; i++) { + if (scu_em_used & (1 << i)) { + ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL); + if (ret) { + printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n", + IRQ_PMU_SCU0 + i); + goto err_free_scu; + } + } + } + + /* + * clear overflow and enable interrupt for all used counters + */ + temp = readl(&emc->PMCR); + for (i = 0; i < NUM_SCU_COUNTERS; i++) { + if (scu_em_used & (1 << i)) { + scu_reset_counter(emc, i); + event = counter_config[SCU_COUNTER(i)].event; + scu_set_event(emc, i, event); + + /* clear overflow/interrupt */ + temp |= 1 << (i + 16); + /* enable interrupt*/ + temp |= 1 << (i + 8); + } + } + + /* Enable all 8 counters */ + temp |= PMCR_E; + writel(temp, &emc->PMCR); + + return 0; + + err_free_scu: + while (i--) + free_irq(IRQ_PMU_SCU0 + i, NULL); + return ret; +} + +static void scu_stop(void) +{ + struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; + unsigned int temp, i; + + /* Disable counter interrupts */ + /* Don't disable all 8 counters (with the E bit) as they may be in use */ + temp = readl(&emc->PMCR); + for (i = 0; i < NUM_SCU_COUNTERS; i++) { + if (scu_em_used & (1 << i)) + temp &= ~(1 << (i + 8)); + } + writel(temp, &emc->PMCR); + + /* Free counter interrupts and reset counters */ + for (i = 0; i < NUM_SCU_COUNTERS; i++) { + if (scu_em_used & (1 << i)) { + scu_reset_counter(emc, i); + free_irq(IRQ_PMU_SCU0 + i, NULL); + } + } +} + +struct em_function_data { + int (*fn)(void); + int ret; +}; + +static void em_func(void *data) +{ + struct em_function_data *d = data; + int ret = d->fn(); + if (ret) + d->ret = ret; +} + +static int em_call_function(int (*fn)(void)) +{ + struct em_function_data data; + + data.fn = fn; + data.ret = 0; + + smp_call_function(em_func, &data, 1, 1); + em_func(&data); + + return data.ret; +} + +/* + * Glue to stick the individual ARM11 PMUs and the SCU + * into the oprofile framework. + */ +static int em_setup_ctrs(void) +{ + int ret; + + /* Configure CPU counters by cross-calling to the other CPUs */ + ret = em_call_function(arm11_setup_pmu); + if (ret == 0) + scu_setup(); + + return 0; +} + +static int arm11_irqs[] = { + [0] = IRQ_PMU_CPU0, + [1] = IRQ_PMU_CPU1, + [2] = IRQ_PMU_CPU2, + [3] = IRQ_PMU_CPU3 +}; + +static int em_start(void) +{ + int ret; + + ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs)); + if (ret == 0) { + em_call_function(arm11_start_pmu); + + ret = scu_start(); + if (ret) + arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs)); + } + return ret; +} + +static void em_stop(void) +{ + em_call_function(arm11_stop_pmu); + arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs)); + scu_stop(); +} + +/* + * Why isn't there a function to route an IRQ to a specific CPU in + * genirq? + */ +static void em_route_irq(int irq, unsigned int cpu) +{ + irq_desc[irq].affinity = cpumask_of_cpu(cpu); + irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu)); +} + +static int em_setup(void) +{ + /* + * Send SCU PMU interrupts to the "owner" CPU. + */ + em_route_irq(IRQ_PMU_SCU0, 0); + em_route_irq(IRQ_PMU_SCU1, 0); + em_route_irq(IRQ_PMU_SCU2, 1); + em_route_irq(IRQ_PMU_SCU3, 1); + em_route_irq(IRQ_PMU_SCU4, 2); + em_route_irq(IRQ_PMU_SCU5, 2); + em_route_irq(IRQ_PMU_SCU6, 3); + em_route_irq(IRQ_PMU_SCU7, 3); + + /* + * Send CP15 PMU interrupts to the owner CPU. + */ + em_route_irq(IRQ_PMU_CPU0, 0); + em_route_irq(IRQ_PMU_CPU1, 1); + em_route_irq(IRQ_PMU_CPU2, 2); + em_route_irq(IRQ_PMU_CPU3, 3); + + return 0; +} + +struct op_arm_model_spec op_mpcore_spec = { + .init = em_setup, + .num_counters = MPCORE_NUM_COUNTERS, + .setup_ctrs = em_setup_ctrs, + .start = em_start, + .stop = em_stop, + .name = "arm/mpcore", +}; diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h new file mode 100644 index 0000000..73d8110 --- /dev/null +++ b/arch/arm/oprofile/op_model_mpcore.h @@ -0,0 +1,61 @@ +/** + * @file op_model_mpcore.c + * MPCORE Event Monitor Driver + * @remark Copyright 2004 ARM SMP Development Team + * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> + * @remark Copyright 2000-2004 MontaVista Software Inc + * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> + * @remark Copyright 2004 Intel Corporation + * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> + * @remark Copyright 2004 Oprofile Authors + * + * @remark Read the file COPYING + * + * @author Zwane Mwaikambo + */ +#ifndef OP_MODEL_MPCORE_H +#define OP_MODEL_MPCORE_H + +struct eventmonitor { + unsigned long PMCR; + unsigned char MCEB[8]; + unsigned long MC[8]; +}; + +/* + * List of userspace counter numbers: note that the structure is important. + * The code relies on CPUn's counters being CPU0's counters + 3n + * and on CPU0's counters starting at 0 + */ + +#define COUNTER_CPU0_PMN0 0 +#define COUNTER_CPU0_PMN1 1 +#define COUNTER_CPU0_CCNT 2 + +#define COUNTER_CPU1_PMN0 3 +#define COUNTER_CPU1_PMN1 4 +#define COUNTER_CPU1_CCNT 5 + +#define COUNTER_CPU2_PMN0 6 +#define COUNTER_CPU2_PMN1 7 +#define COUNTER_CPU2_CCNT 8 + +#define COUNTER_CPU3_PMN0 9 +#define COUNTER_CPU3_PMN1 10 +#define COUNTER_CPU3_CCNT 11 + +#define COUNTER_SCU_MN0 12 +#define COUNTER_SCU_MN1 13 +#define COUNTER_SCU_MN2 14 +#define COUNTER_SCU_MN3 15 +#define COUNTER_SCU_MN4 16 +#define COUNTER_SCU_MN5 17 +#define COUNTER_SCU_MN6 18 +#define COUNTER_SCU_MN7 19 +#define NUM_SCU_COUNTERS 8 + +#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0) + +#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS) + +#endif diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c new file mode 100644 index 0000000..fe58138 --- /dev/null +++ b/arch/arm/oprofile/op_model_v6.c @@ -0,0 +1,67 @@ +/** + * @file op_model_v6.c + * ARM11 Performance Monitor Driver + * + * Based on op_model_xscale.c + * + * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> + * @remark Copyright 2000-2004 MontaVista Software Inc + * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> + * @remark Copyright 2004 Intel Corporation + * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> + * @remark Copyright 2004 OProfile Authors + * + * @remark Read the file COPYING + * + * @author Tony Lindgren <tony@atomide.com> + */ + +/* #define DEBUG */ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/oprofile.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include "op_counter.h" +#include "op_arm_model.h" +#include "op_model_arm11_core.h" + +static int irqs[] = { +#ifdef CONFIG_ARCH_OMAP2 + 3, +#endif +}; + +static void armv6_pmu_stop(void) +{ + arm11_stop_pmu(); + arm11_release_interrupts(irqs, ARRAY_SIZE(irqs)); +} + +static int armv6_pmu_start(void) +{ + int ret; + + ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs)); + if (ret >= 0) + ret = arm11_start_pmu(); + + return ret; +} + +static int armv6_detect_pmu(void) +{ + return 0; +} + +struct op_arm_model_spec op_armv6_spec = { + .init = armv6_detect_pmu, + .num_counters = 3, + .setup_ctrs = arm11_setup_pmu, + .start = armv6_pmu_start, + .stop = armv6_pmu_stop, + .name = "arm/armv6", +}; diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 23da00b..3250d73 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -2,7 +2,29 @@ # Makefile for the linux kernel. # -obj-y := gpio.o i2c.o pci.o setup.o time.o -obj-m := -obj-n := -obj- := +obj-y := + +# IOP32X +obj-$(CONFIG_ARCH_IOP32X) += gpio.o +obj-$(CONFIG_ARCH_IOP32X) += i2c.o +obj-$(CONFIG_ARCH_IOP32X) += pci.o +obj-$(CONFIG_ARCH_IOP32X) += setup.o +obj-$(CONFIG_ARCH_IOP32X) += time.o +obj-$(CONFIG_ARCH_IOP32X) += io.o +obj-$(CONFIG_ARCH_IOP32X) += cp6.o + +# IOP33X +obj-$(CONFIG_ARCH_IOP33X) += gpio.o +obj-$(CONFIG_ARCH_IOP33X) += i2c.o +obj-$(CONFIG_ARCH_IOP33X) += pci.o +obj-$(CONFIG_ARCH_IOP33X) += setup.o +obj-$(CONFIG_ARCH_IOP33X) += time.o +obj-$(CONFIG_ARCH_IOP33X) += io.o +obj-$(CONFIG_ARCH_IOP33X) += cp6.o + +# IOP13XX +obj-$(CONFIG_ARCH_IOP13XX) += cp6.o + +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c new file mode 100644 index 0000000..9612a87 --- /dev/null +++ b/arch/arm/plat-iop/cp6.c @@ -0,0 +1,50 @@ +/* + * IOP Coprocessor-6 access handler + * Copyright (c) 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ +#include <linux/init.h> +#include <asm/traps.h> + +static int cp6_trap(struct pt_regs *regs, unsigned int instr) +{ + u32 temp; + + /* enable cp6 access */ + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "orr %0, %0, #(1 << 6)\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + : "=r"(temp)); + + return 0; +} + +/* permit kernel space cp6 access + * deny user space cp6 access + */ +static struct undef_hook cp6_hook = { + .instr_mask = 0x0f000ff0, + .instr_val = 0x0e000610, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = cp6_trap, +}; + +void __init iop_init_cp6_handler(void) +{ + register_undef_hook(&cp6_hook); +} diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c new file mode 100644 index 0000000..f7eccec --- /dev/null +++ b/arch/arm/plat-iop/io.c @@ -0,0 +1,58 @@ +/* + * iop3xx custom ioremap implementation + * Copyright (c) 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/hardware.h> +#include <asm/io.h> + +void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size, + unsigned long flags) +{ + void __iomem * retval; + + switch (cookie) { + case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA: + retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie); + break; + case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA: + retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie); + break; + default: + retval = __ioremap(cookie, size, flags); + } + + return retval; +} +EXPORT_SYMBOL(__iop3xx_ioremap); + +void __iop3xx_iounmap(void __iomem *addr) +{ + extern void __iounmap(volatile void __iomem *addr); + + switch ((u32) addr) { + case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA: + case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA: + goto skip; + } + __iounmap(addr); + +skip: + return; +} +EXPORT_SYMBOL(__iop3xx_iounmap); diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index e647812..b5f6ec3 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -196,8 +196,8 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) if (!res) panic("PCI: unable to alloc resources"); - res[0].start = IOP3XX_PCI_LOWER_IO_VA; - res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; + res[0].start = IOP3XX_PCI_LOWER_IO_PA; + res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; res[0].name = "IOP3XX PCI I/O Space"; res[0].flags = IORESOURCE_IO; request_resource(&ioport_resource, &res[0]); @@ -209,7 +209,7 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&iomem_resource, &res[1]); sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; - sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA; + sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA; sys->resource[0] = &res[0]; sys->resource[1] = &res[1]; diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig new file mode 100644 index 0000000..e223431 --- /dev/null +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -0,0 +1,99 @@ +# arch/arm/plat-s3c24xx/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_S3C24XX + bool + depends on ARCH_S3C2410 + default y if ARCH_S3C2410 + help + Base platform code for any Samsung S3C device + +if PLAT_S3C24XX + +config CPU_S3C244X + bool + depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) + help + Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. + +config PM_SIMTEC + bool + help + Common power management code for systems that are + compatible with the Simtec style of power management + +config S3C2410_BOOT_WATCHDOG + bool "S3C2410 Initialisation watchdog" + depends on ARCH_S3C2410 && S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +config S3C2410_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on ARCH_S3C2410 && PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + for more information. + +config S3C2410_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on ARCH_S3C2410 && PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + +config S3C2410_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + +config S3C2410_LOWLEVEL_UART_PORT + int "S3C2410 UART to use for low-level messages" + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. + +config S3C2410_DMA + bool "S3C2410 DMA support" + depends on ARCH_S3C2410 + help + S3C2410 DMA support. This is needed for drivers like sound which + use the S3C2410's DMA system to move data to and from the + peripheral blocks. + +config S3C2410_DMA_DEBUG + bool "S3C2410 DMA support debug" + depends on ARCH_S3C2410 && S3C2410_DMA + help + Enable debugging output for the DMA code. This option sends info + to the kernel log, at priority KERN_DEBUG. + +config MACH_SMDK + bool + help + Common machine code for SMDK2410 and SMDK2440 + +endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile new file mode 100644 index 0000000..8e5ccaa --- /dev/null +++ b/arch/arm/plat-s3c24xx/Makefile @@ -0,0 +1,30 @@ +# arch/arm/plat-s3c24xx/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + + +# Core files + +obj-y += cpu.o +obj-y += irq.o +obj-y += devs.o +obj-y += gpio.o +obj-y += time.o +obj-y += clock.o + +# Architecture dependant builds + +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_MACH_SMDK) += common-smdk.o diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c new file mode 100644 index 0000000..d3dc03a --- /dev/null +++ b/arch/arm/plat-s3c24xx/clock.c @@ -0,0 +1,449 @@ +/* linux/arch/arm/plat-s3c24xx/clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Core clock control support + * + * Based on, and code from linux/arch/arm/mach-versatile/clock.c + ** + ** Copyright (C) 2004 ARM Limited. + ** Written by Deep Blue Solutions Limited. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-gpio.h> + +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> + +/* clock information */ + +static LIST_HEAD(clocks); + +DEFINE_MUTEX(clocks_mutex); + +/* enable and disable calls for use with the clk struct */ + +static int clk_null_enable(struct clk *clk, int enable) +{ + return 0; +} + +/* Clock API calls */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p; + struct clk *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(p, &clocks, list) { + if (p->id == idno && + strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + + /* check for the case where a device was supplied, but the + * clock that was being searched for is not device specific */ + + if (IS_ERR(clk)) { + list_for_each_entry(p, &clocks, list) { + if (p->id == -1 && strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + } + + mutex_unlock(&clocks_mutex); + return clk; +} + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} + +int clk_enable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return -EINVAL; + + clk_enable(clk->parent); + + mutex_lock(&clocks_mutex); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + mutex_unlock(&clocks_mutex); + return 0; +} + +void clk_disable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return; + + mutex_lock(&clocks_mutex); + + if ((--clk->usage) == 0) + (clk->enable)(clk, 0); + + mutex_unlock(&clocks_mutex); + clk_disable(clk->parent); +} + + +unsigned long clk_get_rate(struct clk *clk) +{ + if (IS_ERR(clk)) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->get_rate != NULL) + return (clk->get_rate)(clk); + + if (clk->parent != NULL) + return clk_get_rate(clk->parent); + + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!IS_ERR(clk) && clk->round_rate) + return (clk->round_rate)(clk, rate); + + return rate; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = (clk->set_rate)(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + + if (clk->set_parent) + ret = (clk->set_parent)(clk, parent); + + mutex_unlock(&clocks_mutex); + + return ret; +} + +EXPORT_SYMBOL(clk_get); +EXPORT_SYMBOL(clk_put); +EXPORT_SYMBOL(clk_enable); +EXPORT_SYMBOL(clk_disable); +EXPORT_SYMBOL(clk_get_rate); +EXPORT_SYMBOL(clk_round_rate); +EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); + +/* base clocks */ + +struct clk clk_xtal = { + .name = "xtal", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_mpll = { + .name = "mpll", + .id = -1, +}; + +struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_f = { + .name = "fclk", + .id = -1, + .rate = 0, + .parent = &clk_mpll, + .ctrlbit = 0, +}; + +struct clk clk_h = { + .name = "hclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_p = { + .name = "pclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + +/* clocks that could be registered by external code */ + +static int s3c24xx_dclk_enable(struct clk *clk, int enable) +{ + unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); + + if (enable) + dclkcon |= clk->ctrlbit; + else + dclkcon &= ~clk->ctrlbit; + + __raw_writel(dclkcon, S3C24XX_DCLKCON); + + return 0; +} + +static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long dclkcon; + unsigned int uclk; + + if (parent == &clk_upll) + uclk = 1; + else if (parent == &clk_p) + uclk = 0; + else + return -EINVAL; + + clk->parent = parent; + + dclkcon = __raw_readl(S3C24XX_DCLKCON); + + if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; + } else { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; + } + + __raw_writel(dclkcon, S3C24XX_DCLKCON); + + return 0; +} + + +static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long mask; + unsigned long source; + + /* calculate the MISCCR setting for the clock */ + + if (parent == &clk_xtal) + source = S3C2410_MISCCR_CLK0_MPLL; + else if (parent == &clk_upll) + source = S3C2410_MISCCR_CLK0_UPLL; + else if (parent == &clk_f) + source = S3C2410_MISCCR_CLK0_FCLK; + else if (parent == &clk_h) + source = S3C2410_MISCCR_CLK0_HCLK; + else if (parent == &clk_p) + source = S3C2410_MISCCR_CLK0_PCLK; + else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) + source = S3C2410_MISCCR_CLK0_DCLK0; + else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) + source = S3C2410_MISCCR_CLK0_DCLK0; + else + return -EINVAL; + + clk->parent = parent; + + if (clk == &s3c24xx_dclk0) + mask = S3C2410_MISCCR_CLK0_MASK; + else { + source <<= 4; + mask = S3C2410_MISCCR_CLK1_MASK; + } + + s3c2410_modify_misccr(mask, source); + return 0; +} + +/* external clock definitions */ + +struct clk s3c24xx_dclk0 = { + .name = "dclk0", + .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, +}; + +struct clk s3c24xx_dclk1 = { + .name = "dclk1", + .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, +}; + +struct clk s3c24xx_clkout0 = { + .name = "clkout0", + .id = -1, + .set_parent = s3c24xx_clkout_setparent, +}; + +struct clk s3c24xx_clkout1 = { + .name = "clkout1", + .id = -1, + .set_parent = s3c24xx_clkout_setparent, +}; + +struct clk s3c24xx_uclk = { + .name = "uclk", + .id = -1, +}; + +/* initialise the clock system */ + +int s3c24xx_register_clock(struct clk *clk) +{ + clk->owner = THIS_MODULE; + + if (clk->enable == NULL) + clk->enable = clk_null_enable; + + /* add to the list of available clocks */ + + mutex_lock(&clocks_mutex); + list_add(&clk->list, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} + +/* initalise all the clocks */ + +int __init s3c24xx_setup_clocks(unsigned long xtal, + unsigned long fclk, + unsigned long hclk, + unsigned long pclk) +{ + printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + + /* initialise the main system clocks */ + + clk_xtal.rate = xtal; + clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); + + clk_mpll.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_f.rate = fclk; + + /* assume uart clocks are correctly setup */ + + /* register our clocks */ + + if (s3c24xx_register_clock(&clk_xtal) < 0) + printk(KERN_ERR "failed to register master xtal\n"); + + if (s3c24xx_register_clock(&clk_mpll) < 0) + printk(KERN_ERR "failed to register mpll clock\n"); + + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + + if (s3c24xx_register_clock(&clk_f) < 0) + printk(KERN_ERR "failed to register cpu fclk\n"); + + if (s3c24xx_register_clock(&clk_h) < 0) + printk(KERN_ERR "failed to register cpu hclk\n"); + + if (s3c24xx_register_clock(&clk_p) < 0) + printk(KERN_ERR "failed to register cpu pclk\n"); + + return 0; +} diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index a40eaa6..908efa7 100644 --- a/arch/arm/mach-s3c2410/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/common-smdk.c +/* linux/arch/arm/plat-s3c24xx/common-smdk.c * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -38,9 +38,9 @@ #include <asm/arch/nand.h> -#include "common-smdk.h" -#include "devs.h" -#include "pm.h" +#include <asm/plat-s3c24xx/common-smdk.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/pm.h> /* LED devices */ diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index ae1f5bb..6a2d107 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/cpu.c +/* linux/arch/arm/plat-s3c24xx/cpu.c * * Copyright (c) 2004-2005 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ @@ -40,15 +40,16 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-serial.h> -#include "cpu.h" -#include "devs.h" -#include "clock.h" -#include "s3c2400.h" -#include "s3c2410.h" -#include "s3c2412.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/s3c2400.h> +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2412.h> #include "s3c244x.h" -#include "s3c2440.h" -#include "s3c2442.h" +#include <asm/plat-s3c24xx/s3c2440.h> +#include <asm/plat-s3c24xx/s3c2442.h> +#include <asm/plat-s3c24xx/s3c2443.h> struct cpu_table { unsigned long idcode; @@ -67,6 +68,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -135,6 +137,15 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s3c2412, }, { + .idcode = 0x32443001, + .idmask = 0xffffffff, + .map_io = s3c2443_map_io, + .init_clocks = s3c2443_init_clocks, + .init_uarts = s3c2443_init_uarts, + .init = s3c2443_init, + .name = name_s3c2443, + }, + { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, .map_io = s3c2400_map_io, diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/plat-s3c24xx/devs.c index faccde2..0fe53b3 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/devs.c +/* linux/arch/arm/plat-s3c24xx/devs.c * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -29,9 +29,10 @@ #include <asm/irq.h> #include <asm/arch/regs-serial.h> +#include <asm/arch/udc.h> -#include "devs.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> /* Serial port registrations */ @@ -230,6 +231,20 @@ struct platform_device s3c_device_usbgadget = { EXPORT_SYMBOL(s3c_device_usbgadget); +void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) +{ + struct s3c2410_udc_mach_info *npd; + + npd = kmalloc(sizeof(*npd), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(*npd)); + s3c_device_usbgadget.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for udc platform data\n"); + } +} + + /* Watchdog */ static struct resource s3c_wdt_resource[] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c new file mode 100644 index 0000000..4540a80 --- /dev/null +++ b/arch/arm/plat-s3c24xx/dma.c @@ -0,0 +1,1499 @@ +/* linux/arch/arm/plat-s3c24xx/dma.c + * + * Copyright (c) 2003-2005,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 DMA core + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifdef CONFIG_S3C2410_DMA_DEBUG +#define DEBUG +#endif + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/dma.h> + +#include <asm/mach/dma.h> +#include <asm/arch/map.h> + +#include <asm/plat-s3c24xx/dma.h> + +/* io map for dma */ +static void __iomem *dma_base; +static struct kmem_cache *dma_kmem; + +static int dma_channels; + +struct s3c24xx_dma_selection dma_sel; + +/* dma channel state information */ +struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +/* debugging functions */ + +#define BUF_MAGIC (0xcafebabe) + +#define dmawarn(fmt...) printk(KERN_DEBUG fmt) + +#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) + +#if 1 +#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) +#else +static inline void +dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) +{ + pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); + writel(val, dma_regaddr(chan, reg)); +} +#endif + +#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) + +/* captured register state for debug */ + +struct s3c2410_dma_regstate { + unsigned long dcsrc; + unsigned long disrc; + unsigned long dstat; + unsigned long dcon; + unsigned long dmsktrig; +}; + +#ifdef CONFIG_S3C2410_DMA_DEBUG + +/* dmadbg_showregs + * + * simple debug routine to print the current state of the dma registers +*/ + +static void +dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) +{ + regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); + regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); + regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); + regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); + regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); +} + +static void +dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, + struct s3c2410_dma_regstate *regs) +{ + printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", + chan->number, fname, line, + regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, + regs->dcon); +} + +static void +dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + + printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", + chan->number, fname, line, chan->load_state, + chan->curr, chan->next, chan->end); + + dmadbg_dumpregs(fname, line, chan, &state); +} + +static void +dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); +} + +#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) +#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan)) +#else +#define dbg_showregs(chan) do { } while(0) +#define dbg_showchan(chan) do { } while(0) +#endif /* CONFIG_S3C2410_DMA_DEBUG */ + +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; + +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ + +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} + +/* s3c2410_dma_stats_timeout + * + * Update DMA stats from timeout info +*/ + +static void +s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) +{ + if (stats == NULL) + return; + + if (val > stats->timeout_longest) + stats->timeout_longest = val; + if (val < stats->timeout_shortest) + stats->timeout_shortest = val; + + stats->timeout_avg += val; +} + +/* s3c2410_dma_waitforload + * + * wait for the DMA engine to load a buffer, and update the state accordingly +*/ + +static int +s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) +{ + int timeout = chan->load_timeout; + int took; + + if (chan->load_state != S3C2410_DMALOAD_1LOADED) { + printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); + return 0; + } + + if (chan->stats != NULL) + chan->stats->loads++; + + while (--timeout > 0) { + if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { + took = chan->load_timeout - timeout; + + s3c2410_dma_stats_timeout(chan->stats, took); + + switch (chan->load_state) { + case S3C2410_DMALOAD_1LOADED: + chan->load_state = S3C2410_DMALOAD_1RUNNING; + break; + + default: + printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); + } + + return 1; + } + } + + if (chan->stats != NULL) { + chan->stats->timeout_failed++; + } + + return 0; +} + + + +/* s3c2410_dma_loadbuffer + * + * load a buffer, and update the channel state +*/ + +static inline int +s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, + struct s3c2410_dma_buf *buf) +{ + unsigned long reload; + + pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", + buf, (unsigned long)buf->data, buf->size); + + if (buf == NULL) { + dmawarn("buffer is NULL\n"); + return -EINVAL; + } + + /* check the state of the channel before we do anything */ + + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); + } + + if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { + dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); + } + + /* it would seem sensible if we are the last buffer to not bother + * with the auto-reload bit, so that the DMA engine will not try + * and load another transfer after this one has finished... + */ + if (chan->load_state == S3C2410_DMALOAD_NONE) { + pr_debug("load_state is none, checking for noreload (next=%p)\n", + buf->next); + reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; + } else { + //pr_debug("load_state is %d => autoreload\n", chan->load_state); + reload = S3C2410_DCON_AUTORELOAD; + } + + if ((buf->data & 0xf0000000) != 0x30000000) { + dmawarn("dmaload: buffer is %p\n", (void *)buf->data); + } + + writel(buf->data, chan->addr_reg); + + dma_wrreg(chan, S3C2410_DMA_DCON, + chan->dcon | reload | (buf->size/chan->xfer_unit)); + + chan->next = buf->next; + + /* update the state of the channel */ + + switch (chan->load_state) { + case S3C2410_DMALOAD_NONE: + chan->load_state = S3C2410_DMALOAD_1LOADED; + break; + + case S3C2410_DMALOAD_1RUNNING: + chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; + break; + + default: + dmawarn("dmaload: unknown state %d in loadbuffer\n", + chan->load_state); + break; + } + + return 0; +} + +/* s3c2410_dma_call_op + * + * small routine to call the op routine with the given op if it has been + * registered +*/ + +static void +s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) +{ + if (chan->op_fn != NULL) { + (chan->op_fn)(chan, op); + } +} + +/* s3c2410_dma_buffdone + * + * small wrapper to check if callback routine needs to be called, and + * if so, call it +*/ + +static inline void +s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, + enum s3c2410_dma_buffresult result) +{ +#if 0 + pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", + chan->callback_fn, buf, buf->id, buf->size, result); +#endif + + if (chan->callback_fn != NULL) { + (chan->callback_fn)(chan, buf->id, buf->size, result); + } +} + +/* s3c2410_dma_start + * + * start a dma channel going +*/ + +static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) +{ + unsigned long tmp; + unsigned long flags; + + pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); + + local_irq_save(flags); + + if (chan->state == S3C2410_DMA_RUNNING) { + pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); + local_irq_restore(flags); + return 0; + } + + chan->state = S3C2410_DMA_RUNNING; + + /* check wether there is anything to load, and if not, see + * if we can find anything to load + */ + + if (chan->load_state == S3C2410_DMALOAD_NONE) { + if (chan->next == NULL) { + printk(KERN_ERR "dma%d: channel has nothing loaded\n", + chan->number); + chan->state = S3C2410_DMA_IDLE; + local_irq_restore(flags); + return -EINVAL; + } + + s3c2410_dma_loadbuffer(chan, chan->next); + } + + dbg_showchan(chan); + + /* enable the channel */ + + if (!chan->irq_enabled) { + enable_irq(chan->irq); + chan->irq_enabled = 1; + } + + /* start the channel going */ + + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + tmp &= ~S3C2410_DMASKTRIG_STOP; + tmp |= S3C2410_DMASKTRIG_ON; + dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); + + pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); + +#if 0 + /* the dma buffer loads should take care of clearing the AUTO + * reloading feature */ + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp &= ~S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); +#endif + + s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; +} + +/* s3c2410_dma_canload + * + * work out if we can queue another buffer into the DMA engine +*/ + +static int +s3c2410_dma_canload(struct s3c2410_dma_chan *chan) +{ + if (chan->load_state == S3C2410_DMALOAD_NONE || + chan->load_state == S3C2410_DMALOAD_1RUNNING) + return 1; + + return 0; +} + +/* s3c2410_dma_enqueue + * + * queue an given buffer for dma transfer. + * + * id the device driver's id information for this buffer + * data the physical address of the buffer data + * size the size of the buffer in bytes + * + * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART + * is checked, and if set, the channel is started. If this flag isn't set, + * then an error will be returned. + * + * It is possible to queue more than one DMA buffer onto a channel at + * once, and the code will deal with the re-loading of the next buffer + * when necessary. +*/ + +int s3c2410_dma_enqueue(unsigned int channel, void *id, + dma_addr_t data, int size) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_buf *buf; + unsigned long flags; + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: id=%p, data=%08x, size=%d\n", + __FUNCTION__, id, (unsigned int)data, size); + + buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); + if (buf == NULL) { + pr_debug("%s: out of memory (%ld alloc)\n", + __FUNCTION__, (long)sizeof(*buf)); + return -ENOMEM; + } + + //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); + //dbg_showchan(chan); + + buf->next = NULL; + buf->data = buf->ptr = data; + buf->size = size; + buf->id = id; + buf->magic = BUF_MAGIC; + + local_irq_save(flags); + + if (chan->curr == NULL) { + /* we've got nothing loaded... */ + pr_debug("%s: buffer %p queued onto empty channel\n", + __FUNCTION__, buf); + + chan->curr = buf; + chan->end = buf; + chan->next = NULL; + } else { + pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", + chan->number, __FUNCTION__, buf); + + if (chan->end == NULL) + pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", + chan->number, __FUNCTION__, chan); + + chan->end->next = buf; + chan->end = buf; + } + + /* if necessary, update the next buffer field */ + if (chan->next == NULL) + chan->next = buf; + + /* check to see if we can load a buffer */ + if (chan->state == S3C2410_DMA_RUNNING) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + printk(KERN_ERR "dma%d: loadbuffer:" + "timeout loading buffer\n", + chan->number); + dbg_showchan(chan); + local_irq_restore(flags); + return -EINVAL; + } + } + + while (s3c2410_dma_canload(chan) && chan->next != NULL) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } else if (chan->state == S3C2410_DMA_IDLE) { + if (chan->flags & S3C2410_DMAF_AUTOSTART) { + s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START); + } + } + + local_irq_restore(flags); + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_enqueue); + +static inline void +s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) +{ + int magicok = (buf->magic == BUF_MAGIC); + + buf->magic = -1; + + if (magicok) { + kmem_cache_free(dma_kmem, buf); + } else { + printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); + } +} + +/* s3c2410_dma_lastxfer + * + * called when the system is out of buffers, to ensure that the channel + * is prepared for shutdown. +*/ + +static inline void +s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) +{ +#if 0 + pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", + chan->number, chan->load_state); +#endif + + switch (chan->load_state) { + case S3C2410_DMALOAD_NONE: + break; + + case S3C2410_DMALOAD_1LOADED: + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + /* flag error? */ + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); + return; + } + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* I belive in this case we do not have anything to do + * until the next buffer comes along, and we turn off the + * reload */ + return; + + default: + pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", + chan->number, chan->load_state); + return; + + } + + /* hopefully this'll shut the damned thing up after the transfer... */ + dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); +} + + +#define dmadbg2(x...) + +static irqreturn_t +s3c2410_dma_irq(int irq, void *devpw) +{ + struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; + struct s3c2410_dma_buf *buf; + + buf = chan->curr; + + dbg_showchan(chan); + + /* modify the channel state */ + + switch (chan->load_state) { + case S3C2410_DMALOAD_1RUNNING: + /* TODO - if we are running only one buffer, we probably + * want to reload here, and then worry about the buffer + * callback */ + + chan->load_state = S3C2410_DMALOAD_NONE; + break; + + case S3C2410_DMALOAD_1LOADED: + /* iirc, we should go back to NONE loaded here, we + * had a buffer, and it was never verified as being + * loaded. + */ + + chan->load_state = S3C2410_DMALOAD_NONE; + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* we'll worry about checking to see if another buffer is + * ready after we've called back the owner. This should + * ensure we do not wait around too long for the DMA + * engine to start the next transfer + */ + + chan->load_state = S3C2410_DMALOAD_1LOADED; + break; + + case S3C2410_DMALOAD_NONE: + printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", + chan->number); + break; + + default: + printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", + chan->number, chan->load_state); + break; + } + + if (buf != NULL) { + /* update the chain to make sure that if we load any more + * buffers when we call the callback function, things should + * work properly */ + + chan->curr = buf->next; + buf->next = NULL; + + if (buf->magic != BUF_MAGIC) { + printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", + chan->number, __FUNCTION__, buf); + return IRQ_HANDLED; + } + + s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); + + /* free resouces */ + s3c2410_dma_freebuf(buf); + } else { + } + + /* only reload if the channel is still running... our buffer done + * routine may have altered the state by requesting the dma channel + * to stop or shutdown... */ + + /* todo: check that when the channel is shut-down from inside this + * function, we cope with unsetting reload, etc */ + + if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { + unsigned long flags; + + switch (chan->load_state) { + case S3C2410_DMALOAD_1RUNNING: + /* don't need to do anything for this state */ + break; + + case S3C2410_DMALOAD_NONE: + /* can load buffer immediately */ + break; + + case S3C2410_DMALOAD_1LOADED: + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + /* flag error? */ + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); + return IRQ_HANDLED; + } + + break; + + case S3C2410_DMALOAD_1LOADED_1RUNNING: + goto no_load; + + default: + printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", + chan->number, chan->load_state); + return IRQ_HANDLED; + } + + local_irq_save(flags); + s3c2410_dma_loadbuffer(chan, chan->next); + local_irq_restore(flags); + } else { + s3c2410_dma_lastxfer(chan); + + /* see if we can stop this channel.. */ + if (chan->load_state == S3C2410_DMALOAD_NONE) { + pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", + chan->number, jiffies); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); + } + } + + no_load: + return IRQ_HANDLED; +} + +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + +/* s3c2410_request_dma + * + * get control of an dma channel +*/ + +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, + void *dev) +{ + struct s3c2410_dma_chan *chan; + unsigned long flags; + int err; + + pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", + channel, client->name, dev); + + local_irq_save(flags); + + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; + } + + dbg_showchan(chan); + + chan->client = client; + chan->in_use = 1; + + if (!chan->irq_claimed) { + pr_debug("dma%d: %s : requesting irq %d\n", + channel, __FUNCTION__, chan->irq); + + chan->irq_claimed = 1; + local_irq_restore(flags); + + err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, + client->name, (void *)chan); + + local_irq_save(flags); + + if (err) { + chan->in_use = 0; + chan->irq_claimed = 0; + local_irq_restore(flags); + + printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", + client->name, chan->irq, chan->number); + return err; + } + + chan->irq_enabled = 1; + } + + local_irq_restore(flags); + + /* need to setup */ + + pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_request); + +/* s3c2410_dma_free + * + * release the given channel back to the system, will stop and flush + * any outstanding transfers, and ensure the channel is ready for the + * next claimant. + * + * Note, although a warning is currently printed if the freeing client + * info is not the same as the registrant's client info, the free is still + * allowed to go through. +*/ + +int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + unsigned long flags; + + if (chan == NULL) + return -EINVAL; + + local_irq_save(flags); + + if (chan->client != client) { + printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", + channel, chan->client, client); + } + + /* sort out stopping and freeing the channel */ + + if (chan->state != S3C2410_DMA_IDLE) { + pr_debug("%s: need to stop dma channel %p\n", + __FUNCTION__, chan); + + /* possibly flush the channel */ + s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); + } + + chan->client = NULL; + chan->in_use = 0; + + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + + chan->irq_claimed = 0; + + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_free); + +static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) +{ + unsigned long flags; + unsigned long tmp; + + pr_debug("%s:\n", __FUNCTION__); + + dbg_showchan(chan); + + local_irq_save(flags); + + s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); + + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + tmp |= S3C2410_DMASKTRIG_STOP; + //tmp &= ~S3C2410_DMASKTRIG_ON; + dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); +#endif + + /* should stop do this, or should we wait for flush? */ + chan->state = S3C2410_DMA_IDLE; + chan->load_state = S3C2410_DMALOAD_NONE; + + local_irq_restore(flags); + + return 0; +} + +void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) +{ + unsigned long tmp; + unsigned int timeout = 0x10000; + + while (timeout-- > 0) { + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + + if (!(tmp & S3C2410_DMASKTRIG_ON)) + return; + } + + pr_debug("dma%d: failed to stop?\n", chan->number); +} + + +/* s3c2410_dma_flush + * + * stop the channel, and remove all current and pending transfers +*/ + +static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_buf *buf, *next; + unsigned long flags; + + pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + + dbg_showchan(chan); + + local_irq_save(flags); + + if (chan->state != S3C2410_DMA_IDLE) { + pr_debug("%s: stopping channel...\n", __FUNCTION__ ); + s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + } + + buf = chan->curr; + if (buf == NULL) + buf = chan->next; + + chan->curr = chan->next = chan->end = NULL; + + if (buf != NULL) { + for ( ; buf != NULL; buf = next) { + next = buf->next; + + pr_debug("%s: free buffer %p, next %p\n", + __FUNCTION__, buf, buf->next); + + s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); + s3c2410_dma_freebuf(buf); + } + } + + dbg_showregs(chan); + + s3c2410_dma_waitforstop(chan); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + { + unsigned long tmp; + + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); + } +#endif + + dbg_showregs(chan); + + local_irq_restore(flags); + + return 0; +} + +int +s3c2410_dma_started(struct s3c2410_dma_chan *chan) +{ + unsigned long flags; + + local_irq_save(flags); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; + +} + +int +s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + switch (op) { + case S3C2410_DMAOP_START: + return s3c2410_dma_start(chan); + + case S3C2410_DMAOP_STOP: + return s3c2410_dma_dostop(chan); + + case S3C2410_DMAOP_PAUSE: + case S3C2410_DMAOP_RESUME: + return -ENOENT; + + case S3C2410_DMAOP_FLUSH: + return s3c2410_dma_flush(chan); + + case S3C2410_DMAOP_STARTED: + return s3c2410_dma_started(chan); + + case S3C2410_DMAOP_TIMEOUT: + return 0; + + } + + return -ENOENT; /* unknown, don't bother */ +} + +EXPORT_SYMBOL(s3c2410_dma_ctrl); + +/* DMA configuration for each channel + * + * DISRCC -> source of the DMA (AHB,APB) + * DISRC -> source address of the DMA + * DIDSTC -> destination of the DMA (AHB,APD) + * DIDST -> destination address of the DMA +*/ + +/* s3c2410_dma_config + * + * xfersize: size of unit in bytes (1,2,4) + * dcon: base value of the DCONx register +*/ + +int s3c2410_dma_config(dmach_t channel, + int xferunit, + int dcon) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", + __FUNCTION__, channel, xferunit, dcon); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); + + switch (xferunit) { + case 1: + dcon |= S3C2410_DCON_BYTE; + break; + + case 2: + dcon |= S3C2410_DCON_HALFWORD; + break; + + case 4: + dcon |= S3C2410_DCON_WORD; + break; + + default: + pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit); + return -EINVAL; + } + + dcon |= S3C2410_DCON_HWTRIG; + dcon |= S3C2410_DCON_INTREQ; + + pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); + + chan->dcon = dcon; + chan->xfer_unit = xferunit; + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_config); + +int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); + + chan->flags = flags; + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_setflags); + + +/* do we need to protect the settings of the fields from + * irq? +*/ + +int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); + + chan->op_fn = rtn; + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_set_opfn); + +int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); + + chan->callback_fn = rtn; + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); + +/* s3c2410_dma_devconfig + * + * configure the dma source/destination hardware type and address + * + * source: S3C2410_DMASRC_HW: source is hardware + * S3C2410_DMASRC_MEM: source is memory + * + * hwcfg: the value for xxxSTCn register, + * bit 0: 0=increment pointer, 1=leave pointer + * bit 1: 0=soucre is AHB, 1=soucre is APB + * + * devaddr: physical address of the source +*/ + +int s3c2410_dma_devconfig(int channel, + enum s3c2410_dmasrc source, + int hwcfg, + unsigned long devaddr) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", + __FUNCTION__, (int)source, hwcfg, devaddr); + + chan->source = source; + chan->dev_addr = devaddr; + + switch (source) { + case S3C2410_DMASRC_HW: + /* source is hardware */ + pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", + __FUNCTION__, devaddr, hwcfg); + dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); + dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); + dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); + + chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); + return 0; + + case S3C2410_DMASRC_MEM: + /* source is memory */ + pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n", + __FUNCTION__, devaddr, hwcfg); + dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); + dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); + dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); + + chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); + return 0; + } + + printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); + return -EINVAL; +} + +EXPORT_SYMBOL(s3c2410_dma_devconfig); + +/* s3c2410_dma_getposition + * + * returns the current transfer points for the dma source and destination +*/ + +int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) +{ + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + + if (chan == NULL) + return -EINVAL; + + if (src != NULL) + *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); + + if (dst != NULL) + *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_getposition); + + +/* system device class */ + +#ifdef CONFIG_PM + +static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) +{ + struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); + + printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); + + if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { + /* the dma channel is still working, which is probably + * a bad thing to do over suspend/resume. We stop the + * channel and assume that the client is either going to + * retry after resume, or that it is broken. + */ + + printk(KERN_INFO "dma: stopping channel %d due to suspend\n", + cp->number); + + s3c2410_dma_dostop(cp); + } + + return 0; +} + +static int s3c2410_dma_resume(struct sys_device *dev) +{ + return 0; +} + +#else +#define s3c2410_dma_suspend NULL +#define s3c2410_dma_resume NULL +#endif /* CONFIG_PM */ + +struct sysdev_class dma_sysclass = { + set_kset_name("s3c24xx-dma"), + .suspend = s3c2410_dma_suspend, + .resume = s3c2410_dma_resume, +}; + +/* kmem cache implementation */ + +static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f) +{ + memset(p, 0, sizeof(struct s3c2410_dma_buf)); +} + +/* initialisation code */ + +int __init s3c24xx_dma_sysclass_init(void) +{ + int ret = sysdev_class_register(&dma_sysclass); + + if (ret != 0) + printk(KERN_ERR "dma sysclass registration failed\n"); + + return ret; +} + +core_initcall(s3c24xx_dma_sysclass_init); + +int __init s3c24xx_dma_sysdev_register(void) +{ + struct s3c2410_dma_chan *cp = s3c2410_chans; + int channel, ret; + + for (channel = 0; channel < dma_channels; cp++, channel++) { + cp->dev.cls = &dma_sysclass; + cp->dev.id = channel; + ret = sysdev_register(&cp->dev); + + if (ret) { + printk(KERN_ERR "error registering dev for dma %d\n", + channel); + return ret; + } + } + + return 0; +} + +late_initcall(s3c24xx_dma_sysdev_register); + +int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride) +{ + struct s3c2410_dma_chan *cp; + int channel; + int ret; + + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); + + dma_channels = channels; + + dma_base = ioremap(S3C24XX_PA_DMA, stride * channels); + if (dma_base == NULL) { + printk(KERN_ERR "dma failed to remap register block\n"); + return -ENOMEM; + } + + dma_kmem = kmem_cache_create("dma_desc", + sizeof(struct s3c2410_dma_buf), 0, + SLAB_HWCACHE_ALIGN, + s3c2410_dma_cache_ctor, NULL); + + if (dma_kmem == NULL) { + printk(KERN_ERR "dma failed to make kmem cache\n"); + ret = -ENOMEM; + goto err; + } + + for (channel = 0; channel < channels; channel++) { + cp = &s3c2410_chans[channel]; + + memset(cp, 0, sizeof(struct s3c2410_dma_chan)); + + /* dma channel irqs are in order.. */ + cp->number = channel; + cp->irq = channel + irq; + cp->regs = dma_base + (channel * stride); + + /* point current stats somewhere */ + cp->stats = &cp->stats_store; + cp->stats_store.timeout_shortest = LONG_MAX; + + /* basic channel configuration */ + + cp->load_timeout = 1<<18; + + printk("DMA channel %d at %p, irq %d\n", + cp->number, cp->regs, cp->irq); + } + + return 0; + + err: + kmem_cache_destroy(dma_kmem); + iounmap(dma_base); + dma_base = NULL; + return ret; +} + +int s3c2410_dma_init(void) +{ + return s3c24xx_dma_init(4, IRQ_DMA0, 0x40); +} + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +static struct s3c24xx_dma_order *dma_order; + + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * first, try the dma ordering given to us by either the relevant + * dma code, or the board. Then just find the first usable free + * channel +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_order_ch *ord = NULL; + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + /* first, try the board mapping */ + + if (dma_order) { + ord = &dma_order->channels[channel]; + + for (ch = 0; ch < dma_channels; ch++) { + if (!is_channel_valid(ord->list[ch])) + continue; + + if (s3c2410_chans[ord->list[ch]].in_use == 0) { + ch = ord->list[ch] & ~DMA_CH_VALID; + goto found; + } + } + + if (ord->flags & DMA_CH_NEVER) + return NULL; + } + + /* second, search the channel map for first free */ + + for (ch = 0; ch < dma_channels; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= dma_channels) + return NULL; + + /* update our channel mapping */ + + found: + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} + +int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord) +{ + struct s3c24xx_dma_order *nord = dma_order; + + if (nord == NULL) + nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL); + + if (nord == NULL) { + printk(KERN_ERR "no memory to store dma channel order\n"); + return -ENOMEM; + } + + dma_order = nord; + memcpy(nord, ord, sizeof(struct s3c24xx_dma_order)); + return 0; +} diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c new file mode 100644 index 0000000..ec3a09c --- /dev/null +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -0,0 +1,188 @@ +/* linux/arch/arm/plat-s3c24xx/gpio.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-gpio.h> + +void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long mask; + unsigned long con; + unsigned long flags; + + if (pin < S3C2410_GPIO_BANKB) { + mask = 1 << S3C2410_GPIO_OFFSET(pin); + } else { + mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; + } + + switch (function) { + case S3C2410_GPIO_LEAVE: + mask = 0; + function = 0; + break; + + case S3C2410_GPIO_INPUT: + case S3C2410_GPIO_OUTPUT: + case S3C2410_GPIO_SFN2: + case S3C2410_GPIO_SFN3: + if (pin < S3C2410_GPIO_BANKB) { + function -= 1; + function &= 1; + function <<= S3C2410_GPIO_OFFSET(pin); + } else { + function &= 3; + function <<= S3C2410_GPIO_OFFSET(pin)*2; + } + } + + /* modify the specified register wwith IRQs off */ + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + con &= ~mask; + con |= function; + + __raw_writel(con, base + 0x00); + + local_irq_restore(flags); +} + +EXPORT_SYMBOL(s3c2410_gpio_cfgpin); + +unsigned int s3c2410_gpio_getcfg(unsigned int pin) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long val = __raw_readl(base); + + if (pin < S3C2410_GPIO_BANKB) { + val >>= S3C2410_GPIO_OFFSET(pin); + val &= 1; + val += 1; + } else { + val >>= S3C2410_GPIO_OFFSET(pin)*2; + val &= 3; + } + + return val | S3C2410_GPIO_INPUT; +} + +EXPORT_SYMBOL(s3c2410_gpio_getcfg); + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + unsigned long flags; + unsigned long up; + + if (pin < S3C2410_GPIO_BANKB) + return; + + local_irq_save(flags); + + up = __raw_readl(base + 0x08); + up &= ~(1L << offs); + up |= to << offs; + __raw_writel(up, base + 0x08); + + local_irq_restore(flags); +} + +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + unsigned long flags; + unsigned long dat; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offs); + dat |= to << offs; + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); +} + +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + + return __raw_readl(base + 0x04) & (1<< offs); +} + +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} + +EXPORT_SYMBOL(s3c2410_modify_misccr); + +int s3c2410_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) + return -1; /* not valid interrupts */ + + if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) + return -1; /* not valid pin */ + + if (pin < S3C2410_GPF4) + return (pin - S3C2410_GPF0) + IRQ_EINT0; + + if (pin < S3C2410_GPG0) + return (pin - S3C2410_GPF4) + IRQ_EINT4; + + return (pin - S3C2410_GPG0) + IRQ_EINT8; +} + +EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c new file mode 100644 index 0000000..ce18639 --- /dev/null +++ b/arch/arm/plat-s3c24xx/irq.c @@ -0,0 +1,801 @@ +/* linux/arch/arm/plat-s3c24xx/irq.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog: + * + * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> + * Fixed compile warnings + * + * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> + * Fixed s3c_extirq_type + * + * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> + * Addition of ADC/TC demux + * + * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> + * Fix for set_irq_type() on low EINT numbers + * + * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> + * Tidy up KF's patch and sort out new release + * + * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> + * Add support for power management controls + * + * 04-Nov-2004 Ben Dooks + * Fix standard IRQ wake for EINT0..4 and RTC + * + * 22-Feb-2005 Ben Dooks + * Fixed edge-triggering on ADC IRQ + * + * 28-Jun-2005 Ben Dooks + * Mark IRQ_LCD valid + * + * 25-Jul-2005 Ben Dooks + * Split the S3C2440 IRQ code to seperate file +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/regs-gpio.h> + +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> +#include <asm/plat-s3c24xx/irq.h> + +/* wakeup irq control */ + +#ifdef CONFIG_PM + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintallow = 0x0000fff0L; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int +s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit = 1 << (irqno - IRQ_EINT0); + + if (!(s3c_irqwake_intallow & irqbit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + + return 0; +} + +static int +s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << (irqno - EXTINT_OFF); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} + +#else +#define s3c_irqext_wake NULL +#define s3c_irq_wake NULL +#endif + + +static void +s3c_irq_mask(unsigned int irqno) +{ + unsigned long mask; + + irqno -= IRQ_EINT0; + + mask = __raw_readl(S3C2410_INTMSK); + mask |= 1UL << irqno; + __raw_writel(mask, S3C2410_INTMSK); +} + +static inline void +s3c_irq_ack(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + + __raw_writel(bitval, S3C2410_SRCPND); + __raw_writel(bitval, S3C2410_INTPND); +} + +static inline void +s3c_irq_maskack(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + unsigned long mask; + + mask = __raw_readl(S3C2410_INTMSK); + __raw_writel(mask|bitval, S3C2410_INTMSK); + + __raw_writel(bitval, S3C2410_SRCPND); + __raw_writel(bitval, S3C2410_INTPND); +} + + +static void +s3c_irq_unmask(unsigned int irqno) +{ + unsigned long mask; + + if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) + irqdbf2("s3c_irq_unmask %d\n", irqno); + + irqno -= IRQ_EINT0; + + mask = __raw_readl(S3C2410_INTMSK); + mask &= ~(1UL << irqno); + __raw_writel(mask, S3C2410_INTMSK); +} + +struct irq_chip s3c_irq_level_chip = { + .name = "s3c-level", + .ack = s3c_irq_maskack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake +}; + +static struct irq_chip s3c_irq_chip = { + .name = "s3c", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake +}; + +static void +s3c_irqext_mask(unsigned int irqno) +{ + unsigned long mask; + + irqno -= EXTINT_OFF; + + mask = __raw_readl(S3C24XX_EINTMASK); + mask |= ( 1UL << irqno); + __raw_writel(mask, S3C24XX_EINTMASK); +} + +static void +s3c_irqext_ack(unsigned int irqno) +{ + unsigned long req; + unsigned long bit; + unsigned long mask; + + bit = 1UL << (irqno - EXTINT_OFF); + + mask = __raw_readl(S3C24XX_EINTMASK); + + __raw_writel(bit, S3C24XX_EINTPEND); + + req = __raw_readl(S3C24XX_EINTPEND); + req &= ~mask; + + /* not sure if we should be acking the parent irq... */ + + if (irqno <= IRQ_EINT7 ) { + if ((req & 0xf0) == 0) + s3c_irq_ack(IRQ_EINT4t7); + } else { + if ((req >> 8) == 0) + s3c_irq_ack(IRQ_EINT8t23); + } +} + +static void +s3c_irqext_unmask(unsigned int irqno) +{ + unsigned long mask; + + irqno -= EXTINT_OFF; + + mask = __raw_readl(S3C24XX_EINTMASK); + mask &= ~( 1UL << irqno); + __raw_writel(mask, S3C24XX_EINTMASK); +} + +int +s3c_irqext_type(unsigned int irq, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + unsigned long newvalue = 0, value; + + if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3)) + { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (irq - IRQ_EINT0) * 2; + extint_offset = (irq - IRQ_EINT0) * 4; + } + else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7)) + { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (irq - (EXTINT_OFF)) * 2; + extint_offset = (irq - (EXTINT_OFF)) * 4; + } + else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15)) + { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT1; + gpcon_offset = (irq - IRQ_EINT8) * 2; + extint_offset = (irq - IRQ_EINT8) * 4; + } + else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23)) + { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT2; + gpcon_offset = (irq - IRQ_EINT8) * 2; + extint_offset = (irq - IRQ_EINT16) * 4; + } else + return -1; + + /* Set the GPIO to external interrupt mode */ + value = __raw_readl(gpcon_reg); + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); + __raw_writel(value, gpcon_reg); + + /* Set the external interrupt to pointed trigger type */ + switch (type) + { + case IRQT_NOEDGE: + printk(KERN_WARNING "No edge setting!\n"); + break; + + case IRQT_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQT_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQT_BOTHEDGE: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQT_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQT_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -1; + } + + value = __raw_readl(extint_reg); + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); + __raw_writel(value, extint_reg); + + return 0; +} + +static struct irq_chip s3c_irqext_chip = { + .name = "s3c-ext", + .mask = s3c_irqext_mask, + .unmask = s3c_irqext_unmask, + .ack = s3c_irqext_ack, + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake +}; + +static struct irq_chip s3c_irq_eint0t4 = { + .name = "s3c-ext0", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, +}; + +/* mask values for the parent registers for each of the interrupt types */ + +#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0)) +#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) +#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) +#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) + + +/* UART0 */ + +static void +s3c_irq_uart0_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART0, 7); +} + +static void +s3c_irq_uart0_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART0); +} + +static void +s3c_irq_uart0_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART0, 7); +} + +static struct irq_chip s3c_irq_uart0 = { + .name = "s3c-uart0", + .mask = s3c_irq_uart0_mask, + .unmask = s3c_irq_uart0_unmask, + .ack = s3c_irq_uart0_ack, +}; + +/* UART1 */ + +static void +s3c_irq_uart1_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3); +} + +static void +s3c_irq_uart1_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART1); +} + +static void +s3c_irq_uart1_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3); +} + +static struct irq_chip s3c_irq_uart1 = { + .name = "s3c-uart1", + .mask = s3c_irq_uart1_mask, + .unmask = s3c_irq_uart1_unmask, + .ack = s3c_irq_uart1_ack, +}; + +/* UART2 */ + +static void +s3c_irq_uart2_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6); +} + +static void +s3c_irq_uart2_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART2); +} + +static void +s3c_irq_uart2_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6); +} + +static struct irq_chip s3c_irq_uart2 = { + .name = "s3c-uart2", + .mask = s3c_irq_uart2_mask, + .unmask = s3c_irq_uart2_unmask, + .ack = s3c_irq_uart2_ack, +}; + +/* ADC and Touchscreen */ + +static void +s3c_irq_adc_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9); +} + +static void +s3c_irq_adc_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT); +} + +static void +s3c_irq_adc_ack(unsigned int irqno) +{ + s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9); +} + +static struct irq_chip s3c_irq_adc = { + .name = "s3c-adc", + .mask = s3c_irq_adc_mask, + .unmask = s3c_irq_adc_unmask, + .ack = s3c_irq_adc_ack, +}; + +/* irq demux for adc */ +static void s3c_irq_demux_adc(unsigned int irq, + struct irq_desc *desc) +{ + unsigned int subsrc, submsk; + unsigned int offset = 9; + struct irq_desc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= offset; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_TC; + desc_handle_irq(IRQ_TC, mydesc); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_ADC; + desc_handle_irq(IRQ_ADC, mydesc); + } + } +} + +static void s3c_irq_demux_uart(unsigned int start) +{ + unsigned int subsrc, submsk; + unsigned int offset = start - IRQ_S3CUART_RX0; + struct irq_desc *desc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n", + start, offset, subsrc, submsk); + + subsrc &= ~submsk; + subsrc >>= offset; + subsrc &= 7; + + if (subsrc != 0) { + desc = irq_desc + start; + + if (subsrc & 1) + desc_handle_irq(start, desc); + + desc++; + + if (subsrc & 2) + desc_handle_irq(start+1, desc); + + desc++; + + if (subsrc & 4) + desc_handle_irq(start+2, desc); + } +} + +/* uart demux entry points */ + +static void +s3c_irq_demux_uart0(unsigned int irq, + struct irq_desc *desc) +{ + irq = irq; + s3c_irq_demux_uart(IRQ_S3CUART_RX0); +} + +static void +s3c_irq_demux_uart1(unsigned int irq, + struct irq_desc *desc) +{ + irq = irq; + s3c_irq_demux_uart(IRQ_S3CUART_RX1); +} + +static void +s3c_irq_demux_uart2(unsigned int irq, + struct irq_desc *desc) +{ + irq = irq; + s3c_irq_demux_uart(IRQ_S3CUART_RX2); +} + +static void +s3c_irq_demux_extint8(unsigned int irq, + struct irq_desc *desc) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + eintpnd &= ~0xff; /* ignore lower irqs */ + + /* we may as well handle all the pending IRQs here */ + + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); + desc_handle_irq(irq, irq_desc + irq); + } + +} + +static void +s3c_irq_demux_extint4t7(unsigned int irq, + struct irq_desc *desc) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + eintpnd &= 0xff; /* only lower irqs */ + + /* we may as well handle all the pending IRQs here */ + + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); + + desc_handle_irq(irq, irq_desc + irq); + } +} + +#ifdef CONFIG_PM + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} + +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + +/* s3c24xx_init_irq + * + * Initialise S3C2410 IRQ system +*/ + +void __init s3c24xx_init_irq(void) +{ + unsigned long pend; + unsigned long last; + int irqno; + int i; + + irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); + + /* first, clear all interrupts pending... */ + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(S3C24XX_EINTPEND); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, S3C24XX_EINTPEND); + printk("irq: clearing pending ext status %08x\n", (int)pend); + last = pend; + } + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(S3C2410_INTPND); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, S3C2410_SRCPND); + __raw_writel(pend, S3C2410_INTPND); + printk("irq: clearing pending status %08x\n", (int)pend); + last = pend; + } + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(S3C2410_SUBSRCPND); + + if (pend == 0 || pend == last) + break; + + printk("irq: clearing subpending status %08x\n", (int)pend); + __raw_writel(pend, S3C2410_SUBSRCPND); + last = pend; + } + + /* register the main interrupts */ + + irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); + + for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { + /* set all the s3c2410 internal irqs */ + + switch (irqno) { + /* deal with the special IRQs (cascaded) */ + + case IRQ_EINT4t7: + case IRQ_EINT8t23: + case IRQ_UART0: + case IRQ_UART1: + case IRQ_UART2: + case IRQ_ADCPARENT: + set_irq_chip(irqno, &s3c_irq_level_chip); + set_irq_handler(irqno, handle_level_irq); + break; + + case IRQ_RESERVED6: + case IRQ_RESERVED24: + /* no IRQ here */ + break; + + default: + //irqdbf("registering irq %d (s3c irq)\n", irqno); + set_irq_chip(irqno, &s3c_irq_chip); + set_irq_handler(irqno, handle_edge_irq); + set_irq_flags(irqno, IRQF_VALID); + } + } + + /* setup the cascade irq handlers */ + + set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); + set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); + + set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); + set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); + set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); + set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); + + /* external interrupts */ + + for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { + irqdbf("registering irq %d (ext int)\n", irqno); + set_irq_chip(irqno, &s3c_irq_eint0t4); + set_irq_handler(irqno, handle_edge_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { + irqdbf("registering irq %d (extended s3c irq)\n", irqno); + set_irq_chip(irqno, &s3c_irqext_chip); + set_irq_handler(irqno, handle_edge_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + /* register the uart interrupts */ + + irqdbf("s3c2410: registering external interrupts\n"); + + for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { + irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); + set_irq_chip(irqno, &s3c_irq_uart0); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { + irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); + set_irq_chip(irqno, &s3c_irq_uart1); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { + irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); + set_irq_chip(irqno, &s3c_irq_uart2); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { + irqdbf("registering irq %d (s3c adc irq)\n", irqno); + set_irq_chip(irqno, &s3c_irq_adc); + set_irq_handler(irqno, handle_edge_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + irqdbf("s3c2410: registered interrupt handlers\n"); +} diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 619133e..bd965f2 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/pm-simtec.c +/* linux/arch/arm/plat-s3c24xx/pm-simtec.c * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -32,7 +32,7 @@ #include <asm/mach-types.h> -#include "pm.h" +#include <asm/plat-s3c24xx/pm.h> #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c new file mode 100644 index 0000000..ecf68d6 --- /dev/null +++ b/arch/arm/plat-s3c24xx/pm.c @@ -0,0 +1,659 @@ +/* linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Power Manager (Suspend-To-RAM) support + * + * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Parts based on arch/arm/mach-pxa/pm.c + * + * Thanks to Dimitry Andric for debugging +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/crc32.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/cacheflush.h> +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-irq.h> + +#include <asm/mach/time.h> + +#include <asm/plat-s3c24xx/pm.h> + +/* for external use */ + +unsigned long s3c_pm_flags; + +#define PFX "s3c24xx-pm: " + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C2410_LOCKTIME), + SAVE_ITEM(S3C2410_CLKCON), + + /* we restore the timings here, with the proviso that the board + * brings the system up in an slower, or equal frequency setting + * to the original system. + * + * if we cannot guarantee this, then things are going to go very + * wrong here, as we modify the refresh and both pll settings. + */ + + SAVE_ITEM(S3C2410_BWSCON), + SAVE_ITEM(S3C2410_BANKCON0), + SAVE_ITEM(S3C2410_BANKCON1), + SAVE_ITEM(S3C2410_BANKCON2), + SAVE_ITEM(S3C2410_BANKCON3), + SAVE_ITEM(S3C2410_BANKCON4), + SAVE_ITEM(S3C2410_BANKCON5), + + SAVE_ITEM(S3C2410_CLKDIVN), + SAVE_ITEM(S3C2410_MPLLCON), + SAVE_ITEM(S3C2410_UPLLCON), + SAVE_ITEM(S3C2410_CLKSLOW), + SAVE_ITEM(S3C2410_REFRESH), +}; + +static struct sleep_save gpio_save[] = { + SAVE_ITEM(S3C2410_GPACON), + SAVE_ITEM(S3C2410_GPADAT), + + SAVE_ITEM(S3C2410_GPBCON), + SAVE_ITEM(S3C2410_GPBDAT), + SAVE_ITEM(S3C2410_GPBUP), + + SAVE_ITEM(S3C2410_GPCCON), + SAVE_ITEM(S3C2410_GPCDAT), + SAVE_ITEM(S3C2410_GPCUP), + + SAVE_ITEM(S3C2410_GPDCON), + SAVE_ITEM(S3C2410_GPDDAT), + SAVE_ITEM(S3C2410_GPDUP), + + SAVE_ITEM(S3C2410_GPECON), + SAVE_ITEM(S3C2410_GPEDAT), + SAVE_ITEM(S3C2410_GPEUP), + + SAVE_ITEM(S3C2410_GPFCON), + SAVE_ITEM(S3C2410_GPFDAT), + SAVE_ITEM(S3C2410_GPFUP), + + SAVE_ITEM(S3C2410_GPGCON), + SAVE_ITEM(S3C2410_GPGDAT), + SAVE_ITEM(S3C2410_GPGUP), + + SAVE_ITEM(S3C2410_GPHCON), + SAVE_ITEM(S3C2410_GPHDAT), + SAVE_ITEM(S3C2410_GPHUP), + + SAVE_ITEM(S3C2410_DCLKCON), +}; + +#ifdef CONFIG_S3C2410_PM_DEBUG + +#define SAVE_UART(va) \ + SAVE_ITEM((va) + S3C2410_ULCON), \ + SAVE_ITEM((va) + S3C2410_UCON), \ + SAVE_ITEM((va) + S3C2410_UFCON), \ + SAVE_ITEM((va) + S3C2410_UMCON), \ + SAVE_ITEM((va) + S3C2410_UBRDIV) + +static struct sleep_save uart_save[] = { + SAVE_UART(S3C24XX_VA_UART0), + SAVE_UART(S3C24XX_VA_UART1), +#ifndef CONFIG_CPU_S3C2400 + SAVE_UART(S3C24XX_VA_UART2), +#endif +}; + +/* debug + * + * we send the debug to printascii() to allow it to be seen if the + * system never wakes up from the sleep +*/ + +extern void printascii(const char *); + +void pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +static void s3c2410_pm_debug_init(void) +{ + unsigned long tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); +} + +#define DBG(fmt...) pm_dbg(fmt) +#else +#define DBG(fmt...) printk(KERN_DEBUG fmt) + +#define s3c2410_pm_debug_init() do { } while(0) + +static struct sleep_save uart_save[] = {}; +#endif + +#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c2410_pm_run_res + * + * go thorugh the given resource list, and look for system ram +*/ + +static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c2410_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + DBG("Found system RAM at %08lx..%08lx\n", + ptr->start, ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c2410_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c2410_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +static void s3c2410_pm_check_prepare(void) +{ + crc_size = 0; + + s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); + + DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c2410_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +static void s3c2410_pm_check_store(void) +{ + if (crcs != NULL) + s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contatins the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c2410_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *ptr; + u32 calc; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, crcs, crc_size)) { + DBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + DBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR PFX "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + DBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/* s3c2410_pm_check_restore + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ + +static void s3c2410_pm_check_restore(void) +{ + if (crcs != NULL) { + s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); + kfree(crcs); + crcs = NULL; + } +} + +#else + +#define s3c2410_pm_check_prepare() do { } while(0) +#define s3c2410_pm_check_restore() do { } while(0) +#define s3c2410_pm_check_store() do { } while(0) +#endif + +/* helper functions to save and restore register state */ + +void s3c2410_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + DBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/* s3c2410_pm_do_restore + * + * restore the system from the given list of saved registers + * + * Note, we do not use DBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/* s3c2410_pm_do_restore_core + * + * similar to s3c2410_pm_do_restore_core + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + __raw_writel(ptr->val, ptr->reg); + } +} + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ + +static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if ((which) & (1L<<i)) { + DBG("IRQ %d asserted at resume\n", start+i); + } + } +} + +/* s3c2410_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + unsigned long irqstate; + unsigned long pinstate; + int irq = s3c2410_gpio_getirq(pin); + + if (irqoffs < 4) + irqstate = s3c_irqwake_intmask & (1L<<irqoffs); + else + irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); + + pinstate = s3c2410_gpio_getcfg(pin); + + if (!irqstate) { + if (pinstate == S3C2410_GPIO_IRQ) + DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + } else { + if (pinstate == S3C2410_GPIO_IRQ) { + DBG("Disabling IRQ %d (pin %d)\n", irq, pin); + s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + } + } +} + +/* s3c2410_pm_configure_extint + * + * configure all external interrupt pins +*/ + +static void s3c2410_pm_configure_extint(void) +{ + int pin; + + /* for each of the external interrupts (EINT0..EINT15) we + * need to check wether it is an external interrupt source, + * and then configure it as an input if it is not + */ + + for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { + s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + } + + for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { + s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + } +} + +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + +#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) + +/* s3c2410_pm_enter + * + * central control for sleep/resume process +*/ + +static int s3c2410_pm_enter(suspend_state_t state) +{ + unsigned long regs_save[16]; + + /* ensure the debug is initialised (if enabled) */ + + s3c2410_pm_debug_init(); + + DBG("s3c2410_pm_enter(%d)\n", state); + + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); + return -EINVAL; + } + + if (state != PM_SUSPEND_MEM) { + printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); + return -EINVAL; + } + + /* check if we have anything to wake-up with... bad things seem + * to happen if you suspend with no wakeup (system will often + * require a full power-cycle) + */ + + if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { + printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); + printk(KERN_ERR PFX "Aborting sleep\n"); + return -EINVAL; + } + + /* prepare check area if configured */ + + s3c2410_pm_check_prepare(); + + /* store the physical address of the register recovery block */ + + s3c2410_sleep_save_phys = virt_to_phys(regs_save); + + DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); + + /* save all necessary core registers not covered by the drivers */ + + s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); + s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + + /* set the irq configuration for wake */ + + s3c2410_pm_configure_extint(); + + DBG("sleep: irq wakeup masks: %08lx,%08lx\n", + s3c_irqwake_intmask, s3c_irqwake_eintmask); + + __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); + __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); + + /* ack any outstanding external interrupts before we go to sleep */ + + __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + + /* call cpu specific preperation */ + + pm_cpu_prep(); + + /* flush cache back to ram */ + + flush_cache_all(); + + s3c2410_pm_check_store(); + + /* send the cpu to sleep... */ + + __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ + + /* s3c2410_cpu_save will also act as our return point from when + * we resume as it saves its own register state, so use the return + * code to differentiate return from save and return from sleep */ + + if (s3c2410_cpu_save(regs_save) == 0) { + flush_cache_all(); + pm_cpu_sleep(); + } + + /* restore the cpu state */ + + cpu_init(); + + /* restore the system state */ + + s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + + s3c2410_pm_debug_init(); + + /* check what irq (if any) restored the system */ + + DBG("post sleep: IRQs 0x%08x, 0x%08x\n", + __raw_readl(S3C2410_SRCPND), + __raw_readl(S3C2410_EINTPEND)); + + s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), + s3c_irqwake_intmask); + + s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), + s3c_irqwake_eintmask); + + DBG("post sleep, preparing to return\n"); + + s3c2410_pm_check_restore(); + + /* ok, let's return from sleep */ + + DBG("S3C2410 PM Resume (post-restore)\n"); + return 0; +} + +/* + * Called after processes are frozen, but before we shut down devices. + */ +static int s3c2410_pm_prepare(suspend_state_t state) +{ + return 0; +} + +/* + * Called after devices are re-setup, but before processes are thawed. + */ +static int s3c2410_pm_finish(suspend_state_t state) +{ + return 0; +} + +/* + * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. + */ +static struct pm_ops s3c2410_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = s3c2410_pm_prepare, + .enter = s3c2410_pm_enter, + .finish = s3c2410_pm_finish, +}; + +/* s3c2410_pm_init + * + * Attach the power management functions. This should be called + * from the board specific initialisation if the board supports + * it. +*/ + +int __init s3c2410_pm_init(void) +{ + printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); + + pm_set_ops(&s3c2410_pm_ops); + return 0; +} diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c index ede9463..a0e39d8 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c +/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c * * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -35,9 +35,9 @@ #include <asm/arch/regs-irq.h> #include <asm/arch/regs-gpio.h> -#include "cpu.h" -#include "pm.h" -#include "irq.h" +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> +#include <asm/plat-s3c24xx/irq.h> /* camera irq */ diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 23c7494..767f2e9 100644 --- a/arch/arm/mach-s3c2410/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/s3c244x.c +/* linux/arch/arm/plat-s3c24xx/s3c244x.c * * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Samsung S3C2440 and S3C2442 Mobile CPU support + * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -35,13 +35,13 @@ #include <asm/arch/regs-gpioj.h> #include <asm/arch/regs-dsc.h> -#include "s3c2410.h" -#include "s3c2440.h" +#include <asm/plat-s3c24xx/s3c2410.h> +#include <asm/plat-s3c24xx/s3c2440.h> #include "s3c244x.h" -#include "clock.h" -#include "devs.h" -#include "cpu.h" -#include "pm.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> +#include <asm/plat-s3c24xx/pm.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h index 1488c1e..f8ed176 100644 --- a/arch/arm/mach-s3c2410/s3c244x.h +++ b/arch/arm/plat-s3c24xx/s3c244x.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c244x.h +/* linux/arch/arm/plat-s3c24xx/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S new file mode 100644 index 0000000..435349d --- /dev/null +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -0,0 +1,157 @@ +/* linux/arch/arm/mach-s3c2410/sleep.S + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 Power Manager (Suspend-To-RAM) support + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-serial.h> + +/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not + * reset the UART configuration, only enable if you really need this! +*/ +//#define CONFIG_DEBUG_RESUME + + .text + + /* s3c2410_cpu_save + * + * save enough of the CPU state to allow us to re-start + * pm.c code. as we store items like the sp/lr, we will + * end up returning from this function when the cpu resumes + * so the return value is set to mark this. + * + * This arangement means we avoid having to flush the cache + * from this code. + * + * entry: + * r0 = pointer to save block + * + * exit: + * r0 = 0 => we stored everything + * 1 => resumed from sleep + */ + +ENTRY(s3c2410_cpu_save) + stmfd sp!, { r4 - r12, lr } + + @@ store co-processor registers + + mrc p15, 0, r4, c13, c0, 0 @ PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ translation table base address + mrc p15, 0, r7, c1, c0, 0 @ control register + + stmia r0, { r4 - r13 } + + mov r0, #0 + ldmfd sp, { r4 - r12, pc } + + @@ return to the caller, after having the MMU + @@ turned on, this restores the last bits from the + @@ stack +resume_with_mmu: + mov r0, #1 + ldmfd sp!, { r4 - r12, pc } + + .ltorg + + @@ the next bits sit in the .data segment, even though they + @@ happen to be code... the s3c2410_sleep_save_phys needs to be + @@ accessed by the resume code before it can restore the MMU. + @@ This means that the variable has to be close enough for the + @@ code to read it... since the .text segment needs to be RO, + @@ the data segment can be the only place to put this code. + + .data + + .global s3c2410_sleep_save_phys +s3c2410_sleep_save_phys: + .word 0 + + /* s3c2410_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c2410_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + @@ load UART to allow us to print the two characters for + @@ resume debug + + mov r2, #S3C24XX_PA_UART & 0xff000000 + orr r2, r2, #S3C24XX_PA_UART & 0xff000 + +#if 0 + /* SMDK2440 LED set */ + mov r14, #S3C24XX_PA_GPIO + ldr r12, [ r14, #0x54 ] + bic r12, r12, #3<<4 + orr r12, r12, #1<<7 + str r12, [ r14, #0x54 ] +#endif + +#ifdef CONFIG_DEBUG_RESUME + mov r3, #'L' + strb r3, [ r2, #S3C2410_UTXH ] +1001: + ldrb r14, [ r3, #S3C2410_UTRSTAT ] + tst r14, #S3C2410_UTRSTAT_TXE + beq 1001b +#endif /* CONFIG_DEBUG_RESUME */ + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs + mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches + + ldr r0, s3c2410_sleep_save_phys @ address of restore block + ldmia r0, { r4 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + mcr p15, 0, r6, c2, c0, 0 @ translation table base + +#ifdef CONFIG_DEBUG_RESUME + mov r3, #'R' + strb r3, [ r2, #S3C2410_UTXH ] +#endif + + ldr r2, =resume_with_mmu + mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc + nop @ second-to-last before mmu + mov pc, r2 @ go back to virtual address + + .ltorg diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/plat-s3c24xx/time.c index 9910bf0..c523d1c 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/time.c +/* linux/arch/arm/plat-s3c24xx/time.c * * Copyright (C) 2003-2005 Simtec Electronics * Ben Dooks, <ben@simtec.co.uk> @@ -37,8 +37,8 @@ #include <asm/arch/regs-irq.h> #include <asm/mach/time.h> -#include "clock.h" -#include "cpu.h" +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> static unsigned long timer_startval; static unsigned long timer_usec_ticks; diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 49e7b12..00c4354 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -3,7 +3,7 @@ * * Copyright (C) 2006 Atmel Corporation * - * Based on arch/arm/mach-at91rm9200/clock.c + * Based on arch/arm/mach-at91/clock.c * Copyright (C) 2005 David Brownell * Copyright (C) 2005 Ivan Kokshaysky * diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h index f953f04..bb8e1f2 100644 --- a/arch/avr32/mach-at32ap/clock.h +++ b/arch/avr32/mach-at32ap/clock.h @@ -3,7 +3,7 @@ * * Copyright (C) 2006 Atmel Corporation * - * Based on arch/arm/mach-at91rm9200/clock.c + * Based on arch/arm/mach-at91/clock.c * Copyright (C) 2005 David Brownell * Copyright (C) 2005 Ivan Kokshaysky * diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 20ee4f7..90e2d93 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -83,7 +83,7 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) * Every time unit enable is asserted, GPOD needs to be cleared * on IOP3XX to avoid data corruption on the bus. */ -#ifdef CONFIG_PLAT_IOP +#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X) if (iop3xx_adap->id == 0) { gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW); gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c3b1567..14e83d0 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -34,6 +34,7 @@ #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/io.h> #include <asm/arch/i2c.h> #include <asm/arch/pxa-regs.h> @@ -54,8 +55,21 @@ struct pxa_i2c { unsigned int irqlogidx; u32 isrlog[32]; u32 icrlog[32]; + + void __iomem *reg_base; + + unsigned long iobase; + unsigned long iosize; + + int irq; }; +#define _IBMR(i2c) ((i2c)->reg_base + 0) +#define _IDBR(i2c) ((i2c)->reg_base + 8) +#define _ICR(i2c) ((i2c)->reg_base + 0x10) +#define _ISR(i2c) ((i2c)->reg_base + 0x18) +#define _ISAR(i2c) ((i2c)->reg_base + 0x20) + /* * I2C Slave mode address */ @@ -130,7 +144,8 @@ static unsigned int i2c_debug = DEBUG; static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) { - dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR); + dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, + readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); } #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__) @@ -153,7 +168,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); printk("i2c: ICR: %08x ISR: %08x\n" - "i2c: log: ", ICR, ISR); + "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c))); for (i = 0; i < i2c->irqlogidx; i++) printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); printk("\n"); @@ -161,7 +176,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) { - return !(ICR & ICR_SCLE); + return !(readl(_ICR(i2c)) & ICR_SCLE); } static void i2c_pxa_abort(struct pxa_i2c *i2c) @@ -173,28 +188,29 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) return; } - while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) { - unsigned long icr = ICR; + while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) { + unsigned long icr = readl(_ICR(i2c)); icr &= ~ICR_START; icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; - ICR = icr; + writel(icr, _ICR(i2c)); show_state(i2c); msleep(1); } - ICR &= ~(ICR_MA | ICR_START | ICR_STOP); + writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), + _ICR(i2c)); } static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) { int timeout = DEF_TIMEOUT; - while (timeout-- && ISR & (ISR_IBB | ISR_UB)) { - if ((ISR & ISR_SAD) != 0) + while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { + if ((readl(_ISR(i2c)) & ISR_SAD) != 0) timeout += 4; msleep(2); @@ -214,9 +230,9 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c) while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, (long)jiffies, ISR, ICR, IBMR); + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); - if (ISR & ISR_SAD) { + if (readl(_ISR(i2c)) & ISR_SAD) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); goto out; @@ -226,7 +242,7 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c) * quick check of the i2c lines themselves to ensure they've * gone high... */ - if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) { + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; @@ -246,7 +262,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c) if (i2c_debug) dev_dbg(&i2c->adap.dev, "setting to bus master\n"); - if ((ISR & (ISR_UB | ISR_IBB)) != 0) { + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); if (!i2c_pxa_wait_master(i2c)) { dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); @@ -254,7 +270,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c) } } - ICR |= ICR_SCLE; + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); return 0; } @@ -270,11 +286,11 @@ static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, (long)jiffies, ISR, ICR, IBMR); + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); - if ((ISR & (ISR_UB|ISR_IBB)) == 0 || - (ISR & ISR_SAD) != 0 || - (ICR & ICR_SCLE) == 0) { + if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || + (readl(_ISR(i2c)) & ISR_SAD) != 0 || + (readl(_ICR(i2c)) & ICR_SCLE) == 0) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; @@ -302,9 +318,9 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) /* we need to wait for the stop condition to end */ /* if we where in stop, then clear... */ - if (ICR & ICR_STOP) { + if (readl(_ICR(i2c)) & ICR_STOP) { udelay(100); - ICR &= ~ICR_STOP; + writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); } if (!i2c_pxa_wait_slave(i2c)) { @@ -314,12 +330,12 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) } } - ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA); - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); if (i2c_debug) { - dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", ICR, ISR); - decode_ICR(ICR); + dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); + decode_ICR(readl(_ICR(i2c))); } } #else @@ -334,24 +350,24 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) i2c_pxa_abort(i2c); /* reset according to 9.8 */ - ICR = ICR_UR; - ISR = I2C_ISR_INIT; - ICR &= ~ICR_UR; + writel(ICR_UR, _ICR(i2c)); + writel(I2C_ISR_INIT, _ISR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); - ISAR = i2c->slave_addr; + writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ - ICR = I2C_ICR_INIT; + writel(I2C_ICR_INIT, _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); - ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE; + writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); #endif i2c_pxa_set_slave(i2c, 0); /* enable unit */ - ICR |= ICR_IUE; + writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); udelay(100); } @@ -371,19 +387,19 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (i2c->slave != NULL) ret = i2c->slave->read(i2c->slave->data); - IDBR = ret; - ICR |= ICR_TB; /* allow next byte */ + writel(ret, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { - unsigned int byte = IDBR; + unsigned int byte = readl(_IDBR(i2c)); if (i2c->slave != NULL) i2c->slave->write(i2c->slave->data, byte); - ICR |= ICR_TB; + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) @@ -403,13 +419,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ - ICR &= ~(ICR_START|ICR_STOP); - ICR |= ICR_TB; + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); timeout = 0x10000; while (1) { - if ((IBMR & 2) == 2) + if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; @@ -420,7 +436,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) } } - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) @@ -447,14 +463,14 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (isr & ISR_BED) { /* what should we do here? */ } else { - IDBR = 0; - ICR |= ICR_TB; + writel(0, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { - ICR |= ICR_TB | ICR_ACKNAK; + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) @@ -466,13 +482,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ - ICR &= ~(ICR_START|ICR_STOP); - ICR |= ICR_TB | ICR_ACKNAK; + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); timeout = 0x10000; while (1) { - if ((IBMR & 2) == 2) + if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; @@ -483,7 +499,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) } } - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) @@ -514,13 +530,13 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) /* * Step 1: target slave address into IDBR */ - IDBR = i2c_pxa_addr_byte(i2c->msg); + writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * Step 2: initiate the write. */ - icr = ICR & ~(ICR_STOP | ICR_ALDIE); - ICR = icr | ICR_START | ICR_TB; + icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); + writel(icr | ICR_START | ICR_TB, _ICR(i2c)); } /* @@ -594,7 +610,7 @@ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) { - u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); again: /* @@ -645,7 +661,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) /* * Write mode. Write the next data byte. */ - IDBR = i2c->msg->buf[i2c->msg_ptr++]; + writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); icr |= ICR_ALDIE | ICR_TB; @@ -675,7 +691,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) /* * Write the next address. */ - IDBR = i2c_pxa_addr_byte(i2c->msg); + writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * And trigger a repeated start, and send the byte. @@ -696,18 +712,18 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) i2c->icrlog[i2c->irqlogidx-1] = icr; - ICR = icr; + writel(icr, _ICR(i2c)); show_state(i2c); } static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) { - u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); /* * Read the byte. */ - i2c->msg->buf[i2c->msg_ptr++] = IDBR; + i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); if (i2c->msg_ptr < i2c->msg->len) { /* @@ -724,17 +740,17 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) i2c->icrlog[i2c->irqlogidx-1] = icr; - ICR = icr; + writel(icr, _ICR(i2c)); } static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) { struct pxa_i2c *i2c = dev_id; - u32 isr = ISR; + u32 isr = readl(_ISR(i2c)); if (i2c_debug > 2 && 0) { dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, isr, ICR, IBMR); + __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); decode_ISR(isr); } @@ -746,7 +762,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) /* * Always clear all pending IRQs. */ - ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED); + writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c)); if (isr & ISR_SAD) i2c_pxa_slave_start(i2c, isr); @@ -779,7 +795,7 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num /* If the I2C controller is disabled we need to reset it (probably due to a suspend/resume destroying state). We do this here as we can then avoid worrying about resuming the controller before its users. */ - if (!(ICR & ICR_IUE)) + if (!(readl(_ICR(i2c)) & ICR_IUE)) i2c_pxa_reset(i2c); for (i = adap->retries; i >= 0; i--) { @@ -810,28 +826,53 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { static struct pxa_i2c i2c_pxa = { .lock = SPIN_LOCK_UNLOCKED, - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait), .adap = { .owner = THIS_MODULE, .algo = &i2c_pxa_algorithm, - .name = "pxa2xx-i2c", + .name = "pxa2xx-i2c.0", .retries = 5, }, }; +#define res_len(r) ((r)->end - (r)->start + 1) static int i2c_pxa_probe(struct platform_device *dev) { struct pxa_i2c *i2c = &i2c_pxa; + struct resource *res; #ifdef CONFIG_I2C_PXA_SLAVE struct i2c_pxa_platform_data *plat = dev->dev.platform_data; #endif int ret; + int irq; -#ifdef CONFIG_PXA27x - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); - udelay(100); -#endif + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + irq = platform_get_irq(dev, 0); + if (res == NULL || irq < 0) + return -ENODEV; + + if (!request_mem_region(res->start, res_len(res), res->name)) + return -ENOMEM; + + i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL); + if (!i2c) { + ret = -ENOMEM; + goto emalloc; + } + + memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c)); + init_waitqueue_head(&i2c->wait); + i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10; + + i2c->reg_base = ioremap(res->start, res_len(res)); + if (!i2c->reg_base) { + ret = -EIO; + goto eremap; + } + + i2c->iobase = res->start; + i2c->iosize = res_len(res); + + i2c->irq = irq; i2c->slave_addr = I2C_PXA_SLAVE_ADDR; @@ -842,11 +883,28 @@ static int i2c_pxa_probe(struct platform_device *dev) } #endif - pxa_set_cken(CKEN14_I2C, 1); - ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED, - "pxa2xx-i2c", i2c); + switch (dev->id) { + case 0: +#ifdef CONFIG_PXA27x + pxa_gpio_mode(GPIO117_I2CSCL_MD); + pxa_gpio_mode(GPIO118_I2CSDA_MD); +#endif + pxa_set_cken(CKEN14_I2C, 1); + break; +#ifdef CONFIG_PXA27x + case 1: + local_irq_disable(); + PCFR |= PCFR_PI2CEN; + local_irq_enable(); + pxa_set_cken(CKEN15_PWRI2C, 1); +#endif + } + + ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, + i2c->adap.name, i2c); if (ret) - goto out; + goto ereqirq; + i2c_pxa_reset(i2c); @@ -856,7 +914,7 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); - goto err_irq; + goto eadapt; } platform_set_drvdata(dev, i2c); @@ -870,9 +928,25 @@ static int i2c_pxa_probe(struct platform_device *dev) #endif return 0; - err_irq: - free_irq(IRQ_I2C, i2c); - out: +eadapt: + free_irq(irq, i2c); +ereqirq: + switch (dev->id) { + case 0: + pxa_set_cken(CKEN14_I2C, 0); + break; +#ifdef CONFIG_PXA27x + case 1: + pxa_set_cken(CKEN15_PWRI2C, 0); + local_irq_disable(); + PCFR &= ~PCFR_PI2CEN; + local_irq_enable(); +#endif + } +eremap: + kfree(i2c); +emalloc: + release_mem_region(res->start, res_len(res)); return ret; } @@ -883,8 +957,21 @@ static int i2c_pxa_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); i2c_del_adapter(&i2c->adap); - free_irq(IRQ_I2C, i2c); - pxa_set_cken(CKEN14_I2C, 0); + free_irq(i2c->irq, i2c); + switch (dev->id) { + case 0: + pxa_set_cken(CKEN14_I2C, 0); + break; +#ifdef CONFIG_PXA27x + case 1: + pxa_set_cken(CKEN15_PWRI2C, 0); + local_irq_disable(); + PCFR &= ~PCFR_PI2CEN; + local_irq_enable(); +#endif + } + release_mem_region(i2c->iobase, i2c->iosize); + kfree(i2c); return 0; } diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 2ce50f3..459f4b4 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -64,6 +64,7 @@ #include <linux/err.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/atmel_pdc.h> #include <linux/mmc/host.h> #include <linux/mmc/protocol.h> @@ -75,7 +76,6 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/at91_mci.h> -#include <asm/arch/at91_pdc.h> #define DRIVER_NAME "at91_mci" @@ -211,13 +211,13 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) /* Check to see if this needs filling */ if (i == 0) { - if (at91_mci_read(host, AT91_PDC_RCR) != 0) { + if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) { pr_debug("Transfer active in current\n"); continue; } } else { - if (at91_mci_read(host, AT91_PDC_RNCR) != 0) { + if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) { pr_debug("Transfer active in next\n"); continue; } @@ -234,12 +234,12 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length); if (i == 0) { - at91_mci_write(host, AT91_PDC_RPR, sg->dma_address); - at91_mci_write(host, AT91_PDC_RCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address); + at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4); } else { - at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address); - at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address); + at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4); } } @@ -303,7 +303,7 @@ static void at91mci_post_dma_read(struct at91mci_host *host) at91mci_pre_dma_read(host); else { at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF); - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); } pr_debug("post dma read done\n"); @@ -320,7 +320,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) pr_debug("Handling the transmit\n"); /* Disable the transfer */ - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); /* Now wait for cmd ready */ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); @@ -431,15 +431,15 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR)); if (!data) { - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS); - at91_mci_write(host, AT91_PDC_RPR, 0); - at91_mci_write(host, AT91_PDC_RCR, 0); - at91_mci_write(host, AT91_PDC_RNPR, 0); - at91_mci_write(host, AT91_PDC_RNCR, 0); - at91_mci_write(host, AT91_PDC_TPR, 0); - at91_mci_write(host, AT91_PDC_TCR, 0); - at91_mci_write(host, AT91_PDC_TNPR, 0); - at91_mci_write(host, AT91_PDC_TNCR, 0); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS); + at91_mci_write(host, ATMEL_PDC_RPR, 0); + at91_mci_write(host, ATMEL_PDC_RCR, 0); + at91_mci_write(host, ATMEL_PDC_RNPR, 0); + at91_mci_write(host, ATMEL_PDC_RNCR, 0); + at91_mci_write(host, ATMEL_PDC_TPR, 0); + at91_mci_write(host, ATMEL_PDC_TCR, 0); + at91_mci_write(host, ATMEL_PDC_TNPR, 0); + at91_mci_write(host, ATMEL_PDC_TNCR, 0); at91_mci_write(host, AT91_MCI_ARGR, cmd->arg); at91_mci_write(host, AT91_MCI_CMDR, cmdr); @@ -452,7 +452,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ /* * Disable the PDC controller */ - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); if (cmdr & AT91_MCI_TRCMD_START) { data->bytes_xfered = 0; @@ -481,8 +481,8 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ pr_debug("Transmitting %d bytes\n", host->total_length); - at91_mci_write(host, AT91_PDC_TPR, host->physical_address); - at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4); + at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); + at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); ier = AT91_MCI_TXBUFE; } } @@ -497,9 +497,9 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ if (cmdr & AT91_MCI_TRCMD_START) { if (cmdr & AT91_MCI_TRDIR) - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); else - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); } return ier; } diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e8dd71d..ad9f321 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -262,7 +262,8 @@ config SERIAL_AMBA_PL010 select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, say Y or M here. + an Integrator/AP or Integrator/PP2 platform, or if you have a + Cirrus Logic EP93xx CPU, say Y or M here. If unsure, say N. diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index df45a7a..935f48f 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -33,12 +33,13 @@ #include <linux/sysrq.h> #include <linux/tty_flip.h> #include <linux/platform_device.h> +#include <linux/atmel_pdc.h> #include <asm/io.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> -#include <asm/arch/at91_pdc.h> + #ifdef CONFIG_ARM #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e216dcf..04cc88c 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -154,7 +154,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) { struct circ_buf *xmit = &sport->port.info->xmit; - do { + while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail]; @@ -163,7 +163,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) sport->port.icount.tx++; if (uart_circ_empty(xmit)) break; - } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)); + } if (uart_circ_empty(xmit)) imx_stop_tx(&sport->port); @@ -178,8 +178,7 @@ static void imx_start_tx(struct uart_port *port) UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN; - if(UTS((u32)sport->port.membase) & UTS_TXEMPTY) - imx_transmit_buffer(sport); + imx_transmit_buffer(sport); } static irqreturn_t imx_rtsint(int irq, void *dev_id) @@ -404,7 +403,8 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; retval = request_irq(sport->rtsirq, imx_rtsint, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + (sport->rtsirq < IMX_IRQS) ? 0 : + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, DRIVER_NAME, sport); if (retval) goto error_out3; @@ -678,7 +678,7 @@ static struct imx_port imx_ports[] = { .mapbase = IMX_UART1_BASE, /* FIXME */ .irq = UART1_MINT_RX, .uartclk = 16000000, - .fifosize = 8, + .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 0, @@ -694,7 +694,7 @@ static struct imx_port imx_ports[] = { .mapbase = IMX_UART2_BASE, /* FIXME */ .irq = UART2_MINT_RX, .uartclk = 16000000, - .fifosize = 8, + .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 1, diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 82369c4..a467780 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -912,7 +912,7 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(udc, AT91_UDP_TXVC, 0); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 1); - else if (cpu_is_at91sam9260()) { + else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); txvc |= AT91_UDP_TXVC_PUON; @@ -929,7 +929,7 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 0); - else if (cpu_is_at91sam9260()) { + else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); txvc &= ~AT91_UDP_TXVC_PUON; diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 27904a5..f01890d 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -155,7 +155,7 @@ static int is_vbus_present(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_vbus) - return pxa_gpio_get(mach->gpio_vbus); + return udc_gpio_get(mach->gpio_vbus); if (mach->udc_is_connected) return mach->udc_is_connected(); return 1; @@ -167,7 +167,7 @@ static void pullup_off(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_pullup) - pxa_gpio_set(mach->gpio_pullup, 0); + udc_gpio_set(mach->gpio_pullup, 0); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); } @@ -177,7 +177,7 @@ static void pullup_on(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_pullup) - pxa_gpio_set(mach->gpio_pullup, 1); + udc_gpio_set(mach->gpio_pullup, 1); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_CONNECT); } @@ -1755,7 +1755,7 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa2xx_udc *dev = _dev; - int vbus = pxa_gpio_get(dev->mach->gpio_vbus); + int vbus = udc_gpio_get(dev->mach->gpio_vbus); pxa2xx_udc_vbus_session(&dev->gadget, vbus); return IRQ_HANDLED; @@ -2545,15 +2545,13 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; if (dev->mach->gpio_vbus) { - vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR); - pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR) - | GPIO_IN); + udc_gpio_init_vbus(dev->mach->gpio_vbus); + vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus); set_irq_type(vbus_irq, IRQT_BOTHEDGE); } else vbus_irq = 0; if (dev->mach->gpio_pullup) - pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR) - | GPIO_OUT | GPIO_DFLT_LOW); + udc_gpio_init_pullup(dev->mach->gpio_pullup); init_timer(&dev->timer); dev->timer.function = udc_watchdog; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index 8e598c8..773e549 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -177,21 +177,6 @@ struct pxa2xx_udc { static struct pxa2xx_udc *the_controller; -static inline int pxa_gpio_get(unsigned gpio) -{ - return (GPLR(gpio) & GPIO_bit(gpio)) != 0; -} - -static inline void pxa_gpio_set(unsigned gpio, int is_on) -{ - int mask = GPIO_bit(gpio); - - if (is_on) - GPSR(gpio) = mask; - else - GPCR(gpio) = mask; -} - /*-------------------------------------------------------------------------*/ /* diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore new file mode 100644 index 0000000..e02c15d --- /dev/null +++ b/include/asm-arm/.gitignore @@ -0,0 +1,2 @@ +arch +mach-types.h diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h index 267e698..df44c12 100644 --- a/include/asm-arm/arch-at91rm9200/at91_aic.h +++ b/include/asm-arm/arch-at91/at91_aic.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_aic.h + * include/asm-arm/arch-at91/at91_aic.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h index e4b8b27..b0369e1 100644 --- a/include/asm-arm/arch-at91rm9200/at91_dbgu.h +++ b/include/asm-arm/arch-at91/at91_dbgu.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_dbgu.h + * include/asm-arm/arch-at91/at91_dbgu.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People @@ -35,6 +35,20 @@ #define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ #define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ #define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ +#define AT91_CIDR_SRAMSIZ_1K (1 << 16) +#define AT91_CIDR_SRAMSIZ_2K (2 << 16) +#define AT91_CIDR_SRAMSIZ_112K (4 << 16) +#define AT91_CIDR_SRAMSIZ_4K (5 << 16) +#define AT91_CIDR_SRAMSIZ_80K (6 << 16) +#define AT91_CIDR_SRAMSIZ_160K (7 << 16) +#define AT91_CIDR_SRAMSIZ_8K (8 << 16) +#define AT91_CIDR_SRAMSIZ_16K (9 << 16) +#define AT91_CIDR_SRAMSIZ_32K (10 << 16) +#define AT91_CIDR_SRAMSIZ_64K (11 << 16) +#define AT91_CIDR_SRAMSIZ_128K (12 << 16) +#define AT91_CIDR_SRAMSIZ_256K (13 << 16) +#define AT91_CIDR_SRAMSIZ_96K (14 << 16) +#define AT91_CIDR_SRAMSIZ_512K (15 << 16) #define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ #define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ #define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h index 5c564ed..ff93df5 100644 --- a/include/asm-arm/arch-at91rm9200/at91_ecc.h +++ b/include/asm-arm/arch-at91/at91_ecc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_ecc.h + * include/asm-arm/arch-at91/at91_ecc.h * * Error Corrected Code Controller (ECC) - System peripherals regsters. * Based on AT91SAM9260 datasheet revision B. diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h index 9cbfcdd..ab040a4 100644 --- a/include/asm-arm/arch-at91rm9200/at91_lcdc.h +++ b/include/asm-arm/arch-at91/at91_lcdc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_lcdc.h + * include/asm-arm/arch-at91/at91_lcdc.h * * LCD Controller (LCDC). * Based on AT91SAM9261 datasheet revision E. diff --git a/include/asm-arm/arch-at91rm9200/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index 9a552cb..40a9876 100644 --- a/include/asm-arm/arch-at91rm9200/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_mci.h + * include/asm-arm/arch-at91/at91_mci.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h index 680eaa1..84c3866 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pio.h +++ b/include/asm-arm/arch-at91/at91_pio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_pio.h + * include/asm-arm/arch-at91/at91_pio.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h index 4a30d009..5026325 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pit.h +++ b/include/asm-arm/arch-at91/at91_pit.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_pit.h + * include/asm-arm/arch-at91/at91_pit.h * * Periodic Interval Timer (PIT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index c3b489d..33ff5b6 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_pmc.h + * include/asm-arm/arch-at91/at91_pmc.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h index 237d3c4..fb8d161 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rstc.h +++ b/include/asm-arm/arch-at91/at91_rstc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_rstc.h + * include/asm-arm/arch-at91/at91_rstc.h * * Reset Controller (RSTC) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. @@ -17,7 +17,7 @@ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */ +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ #define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ @@ -34,6 +34,5 @@ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ -#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */ #endif diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h index 095fe08..af9bd28 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rtc.h +++ b/include/asm-arm/arch-at91/at91_rtc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_rtc.h + * include/asm-arm/arch-at91/at91_rtc.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h index c6751ba..bae1103 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rtt.h +++ b/include/asm-arm/arch-at91/at91_rtt.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_rtt.h + * include/asm-arm/arch-at91/at91_rtt.h * * Real-time Timer (RTT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h index 0439250..795fcc2 100644 --- a/include/asm-arm/arch-at91rm9200/at91_shdwc.h +++ b/include/asm-arm/arch-at91/at91_shdwc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_shdwc.h + * include/asm-arm/arch-at91/at91_shdwc.h * * Shutdown Controller (SHDWC) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. diff --git a/include/asm-arm/arch-at91rm9200/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h index bec48ca..f9b9a84 100644 --- a/include/asm-arm/arch-at91rm9200/at91_spi.h +++ b/include/asm-arm/arch-at91/at91_spi.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_spi.h + * include/asm-arm/arch-at91/at91_spi.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h index 694bcaa..0ecc734 100644 --- a/include/asm-arm/arch-at91rm9200/at91_ssc.h +++ b/include/asm-arm/arch-at91/at91_ssc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_ssc.h + * include/asm-arm/arch-at91/at91_ssc.h * * Copyright (C) SAN People * diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91/at91_st.h index 2432ddf..30446e2 100644 --- a/include/asm-arm/arch-at91rm9200/at91_st.h +++ b/include/asm-arm/arch-at91/at91_st.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_st.h + * include/asm-arm/arch-at91/at91_st.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h index 8d06eb0..b85d3fa 100644 --- a/include/asm-arm/arch-at91rm9200/at91_tc.h +++ b/include/asm-arm/arch-at91/at91_tc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_tc.h + * include/asm-arm/arch-at91/at91_tc.h * * Copyright (C) SAN People * diff --git a/include/asm-arm/arch-at91rm9200/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h index cda914f..ca9a907 100644 --- a/include/asm-arm/arch-at91rm9200/at91_twi.h +++ b/include/asm-arm/arch-at91/at91_twi.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_twi.h + * include/asm-arm/arch-at91/at91_twi.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h index ac63e77..7251a34 100644 --- a/include/asm-arm/arch-at91rm9200/at91_wdt.h +++ b/include/asm-arm/arch-at91/at91_wdt.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91_wdt.h + * include/asm-arm/arch-at91/at91_wdt.h * * Watchdog Timer (WDT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h index c569b6a..a12ac8a 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91/at91rm9200.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200.h + * include/asm-arm/arch-at91/at91rm9200.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h index fbc091e..0c417af 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h +++ b/include/asm-arm/arch-at91/at91rm9200_emac.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h + * include/asm-arm/arch-at91/at91rm9200_emac.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h index 0c0d814..24d0129 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h +++ b/include/asm-arm/arch-at91/at91rm9200_mc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h + * include/asm-arm/arch-at91/at91rm9200_mc.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h index 46f4dd6..2cadebc 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9260.h +++ b/include/asm-arm/arch-at91/at91sam9260.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91sam9260.h + * include/asm-arm/arch-at91/at91sam9260.h * * (C) 2006 Andrew Victor * @@ -113,6 +113,10 @@ #define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ +#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ +#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ + + #if 0 /* * PIO pin definitions (peripheral A/B multiplexing). diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h index 78f6b49..aacb1e9 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h + * include/asm-arm/arch-at91/at91sam9260_matrix.h * * Memory Controllers (MATRIX, EBI) - System peripherals registers. * Based on AT91SAM9260 datasheet revision B. @@ -18,7 +18,7 @@ #define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ #define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ #define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h index 8d39672..01b58ff 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261.h +++ b/include/asm-arm/arch-at91/at91sam9261.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91sam9261.h + * include/asm-arm/arch-at91/at91sam9261.h * * Copyright (C) SAN People * diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h index ec88efa..6f07242 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h + * include/asm-arm/arch-at91/at91sam9261_matrix.h * * Memory Controllers (MATRIX, EBI) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h new file mode 100644 index 0000000..f4af68a --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9263.h @@ -0,0 +1,131 @@ +/* + * include/asm-arm/arch-at91/at91sam9263.h + * + * (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_H +#define AT91SAM9263_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ +#define AT91SAM9263_ID_US0 7 /* USART 0 */ +#define AT91SAM9263_ID_US1 8 /* USART 1 */ +#define AT91SAM9263_ID_US2 9 /* USART 2 */ +#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ +#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ +#define AT91SAM9263_ID_CAN 12 /* CAN */ +#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ +#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ +#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ +#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ +#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ +#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ +#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ +#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ +#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ +#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ +#define AT91SAM9263_ID_UHP 29 /* USB Host port */ +#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9263_BASE_UDP 0xfff78000 +#define AT91SAM9263_BASE_TCB0 0xfff7c000 +#define AT91SAM9263_BASE_TC0 0xfff7c000 +#define AT91SAM9263_BASE_TC1 0xfff7c040 +#define AT91SAM9263_BASE_TC2 0xfff7c080 +#define AT91SAM9263_BASE_MCI0 0xfff80000 +#define AT91SAM9263_BASE_MCI1 0xfff84000 +#define AT91SAM9263_BASE_TWI 0xfff88000 +#define AT91SAM9263_BASE_US0 0xfff8c000 +#define AT91SAM9263_BASE_US1 0xfff90000 +#define AT91SAM9263_BASE_US2 0xfff94000 +#define AT91SAM9263_BASE_SSC0 0xfff98000 +#define AT91SAM9263_BASE_SSC1 0xfff9c000 +#define AT91SAM9263_BASE_AC97C 0xfffa0000 +#define AT91SAM9263_BASE_SPI0 0xfffa4000 +#define AT91SAM9263_BASE_SPI1 0xfffa8000 +#define AT91SAM9263_BASE_CAN 0xfffac000 +#define AT91SAM9263_BASE_PWMC 0xfffb8000 +#define AT91SAM9263_BASE_EMAC 0xfffbc000 +#define AT91SAM9263_BASE_ISI 0xfffc4000 +#define AT91SAM9263_BASE_2DGE 0xfffc8000 +#define AT91_BASE_SYS 0xffffe000 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) +#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) +#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) +#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) + +#define AT91_SMC AT91_SMC0 + +/* + * Internal Memory. + */ +#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ +#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ + +#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ +#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ + +#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ +#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ +#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ + +#if 0 +/* + * PIO pin definitions (peripheral A/B multiplexing). + */ + +// TODO: Add + +#endif + +#endif diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h new file mode 100644 index 0000000..6fc6e4b --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h @@ -0,0 +1,129 @@ +/* + * include/asm-arm/arch-at91/at91sam9263_matrix.h + * + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9263 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9263_MATRIX_H +#define AT91SAM9263_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) + +#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) +#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h index 972e753..d82631c 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91/at91sam926x_mc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h + * include/asm-arm/arch-at91/at91sam926x_mc.h * * Memory Controllers (SMC, SDRAMC) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. @@ -131,4 +131,11 @@ #define AT91_SMC_PS_16 (2 << 28) #define AT91_SMC_PS_32 (3 << 28) +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + #endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91/board.h index 768e0fc..7b9903c 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/board.h + * include/asm-arm/arch-at91/board.h * * Copyright (C) 2005 HP Labs * @@ -60,7 +60,7 @@ struct at91_mmc_data { u8 wp_pin; /* (SD) writeprotect detect */ u8 vcc_pin; /* power switching (high == on) */ }; -extern void __init at91_add_device_mmc(struct at91_mmc_data *data); +extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); /* Ethernet */ struct at91_eth_data { @@ -69,9 +69,14 @@ struct at91_eth_data { }; extern void __init at91_add_device_eth(struct at91_eth_data *data); +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) +#define eth_platform_data at91_eth_data +#endif + /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ + u8 vbus_pin[]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91/cpu.h index 6f8d09b..d464ca5 100644 --- a/include/asm-arm/arch-at91rm9200/cpu.h +++ b/include/asm-arm/arch-at91/cpu.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/cpu.h + * include/asm-arm/arch-at91/cpu.h * * Copyright (C) 2006 SAN People * @@ -20,7 +20,11 @@ #define ARCH_ID_AT91RM9200 0x09290780 #define ARCH_ID_AT91SAM9260 0x019803a0 #define ARCH_ID_AT91SAM9261 0x019703a0 +#define ARCH_ID_AT91SAM9263 0x019607a0 +#define ARCH_ID_AT91SAM9XE128 0x329973a0 +#define ARCH_ID_AT91SAM9XE256 0x329a93a0 +#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 static inline unsigned long at91_cpu_identify(void) { @@ -28,6 +32,16 @@ static inline unsigned long at91_cpu_identify(void) } +#define ARCH_FAMILY_AT91X92 0x09200000 +#define ARCH_FAMILY_AT91SAM9 0x01900000 +#define ARCH_FAMILY_AT91SAM9XE 0x02900000 + +static inline unsigned long at91_arch_identify(void) +{ + return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); +} + + #ifdef CONFIG_ARCH_AT91RM9200 #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) #else @@ -35,8 +49,10 @@ static inline unsigned long at91_cpu_identify(void) #endif #ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260) +#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) +#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) #else +#define cpu_is_at91sam9xe() (0) #define cpu_is_at91sam9260() (0) #endif @@ -46,4 +62,10 @@ static inline unsigned long at91_cpu_identify(void) #define cpu_is_at91sam9261() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9263 +#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) +#else +#define cpu_is_at91sam9263() (0) +#endif + #endif diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S new file mode 100644 index 0000000..13e9f5e --- /dev/null +++ b/include/asm-arm/arch-at91/debug-macro.S @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-at91/debug-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <asm/hardware.h> +#include <asm/arch/at91_dbgu.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete + beq 1001b + .endm + diff --git a/include/asm-arm/arch-at91rm9200/dma.h b/include/asm-arm/arch-at91/dma.h index 22c1dfd..7745654 100644 --- a/include/asm-arm/arch-at91rm9200/dma.h +++ b/include/asm-arm/arch-at91/dma.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/dma.h + * include/asm-arm/arch-at91/dma.h * * Copyright (C) 2003 SAN People * diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S new file mode 100644 index 0000000..76c8ccc --- /dev/null +++ b/include/asm-arm/arch-at91/entry-macro.S @@ -0,0 +1,26 @@ +/* + * include/asm-arm/arch-at91/entry-macro.S + * + * Copyright (C) 2003-2005 SAN People + * + * Low-level IRQ helper macros for AT91RM9200 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/hardware.h> +#include <asm/arch/at91_aic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral + ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) + ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number + teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt + streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now. + .endm + diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91/gpio.h index e09d652..98ad211 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/gpio.h + * include/asm-arm/arch-at91/gpio.h * * Copyright (C) 2005 HP Labs * @@ -17,7 +17,7 @@ #define PIN_BASE NR_AIC_IRQS -#define MAX_GPIO_BANKS 4 +#define MAX_GPIO_BANKS 5 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ @@ -26,37 +26,31 @@ #define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) #define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) #define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) - #define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) #define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) #define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) #define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) #define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) - #define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) #define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) #define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) #define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) #define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) - #define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) #define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) #define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) #define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) #define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) - #define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) #define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) #define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) #define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) #define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) - #define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) #define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) #define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) #define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) #define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) - #define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) #define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) @@ -65,37 +59,31 @@ #define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) #define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) #define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) - #define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) #define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) #define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) #define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) #define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) - #define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) #define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) #define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) #define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) #define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) - #define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) #define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) #define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) #define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) #define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) - #define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) #define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) #define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) #define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) #define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) - #define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) #define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) #define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) #define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) #define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) - #define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) #define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) @@ -104,37 +92,31 @@ #define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) #define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) #define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) - #define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) #define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) #define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) #define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) #define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) - #define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) #define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) #define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) #define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) #define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) - #define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) #define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) #define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) #define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) #define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) - #define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) #define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) #define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) #define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) #define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) - #define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) #define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) #define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) #define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) #define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) - #define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) #define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) @@ -143,40 +125,67 @@ #define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) #define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) #define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) - #define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) #define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) #define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) #define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) #define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) - #define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) #define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) #define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) #define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) #define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) - #define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) #define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) #define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) #define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) #define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) - #define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) #define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) #define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) #define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) #define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) - #define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) #define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) #define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) #define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) #define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) - #define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) #define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) +#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) +#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) +#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) +#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) +#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) +#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) +#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) +#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) +#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) +#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) +#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) +#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) +#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) +#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) +#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) +#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) +#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) +#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) +#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) +#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) +#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) +#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) +#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) +#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) +#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) +#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) +#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) +#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) +#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) +#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) +#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) +#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) + #ifndef __ASSEMBLY__ /* setup setup routines, called from board init or driver probe() */ extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91/hardware.h index 9ea5bfe..eaaf1c1 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/hardware.h + * include/asm-arm/arch-at91/hardware.h * * Copyright (C) 2003 SAN People * Copyright (C) 2003 ATMEL @@ -22,21 +22,23 @@ #include <asm/arch/at91sam9260.h> #elif defined(CONFIG_ARCH_AT91SAM9261) #include <asm/arch/at91sam9261.h> +#elif defined(CONFIG_ARCH_AT91SAM9263) +#include <asm/arch/at91sam9263.h> #else #error "Unsupported AT91 processor" #endif /* - * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF - * to 0xFEFA0000 .. 0xFF000000. (384Kb) + * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF + * to 0xFEF78000 .. 0xFF000000. (5444Kb) */ -#define AT91_IO_PHYS_BASE 0xFFFA0000 +#define AT91_IO_PHYS_BASE 0xFFF78000 #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) #define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) /* Convert a physical IO address to virtual IO address */ -#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) +#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) /* * Virtual to Physical Address mapping for IO devices. diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91/io.h index 88fd1be..401f327 100644 --- a/include/asm-arm/arch-at91rm9200/io.h +++ b/include/asm-arm/arch-at91/io.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/io.h + * include/asm-arm/arch-at91/io.h * * Copyright (C) 2003 SAN People * diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91/irqs.h index c0679ea..1ffa3bb 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91/irqs.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/irqs.h + * include/asm-arm/arch-at91/irqs.h * * Copyright (C) 2004 SAN People * @@ -37,8 +37,8 @@ * IRQ interrupt symbols are the AT91xxx_ID_* symbols * for IRQs handled directly through the AIC, or else the AT91_PIN_* * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 4 banks of GPIO. + * We make provision for 5 banks of GPIO. */ -#define NR_IRQS (NR_AIC_IRQS + (4 * 32)) +#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) #endif diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91/memory.h index f985069..4835d67 100644 --- a/include/asm-arm/arch-at91rm9200/memory.h +++ b/include/asm-arm/arch-at91/memory.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/memory.h + * include/asm-arm/arch-at91/memory.h * * Copyright (C) 2004 SAN People * diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91/system.h index 9c67130..6bf8460 100644 --- a/include/asm-arm/arch-at91rm9200/system.h +++ b/include/asm-arm/arch-at91/system.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/system.h + * include/asm-arm/arch-at91/system.h * * Copyright (C) 2003 SAN People * diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91/timex.h index faeca45..f41636d 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91/timex.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/timex.h + * include/asm-arm/arch-at91/timex.h * * Copyright (C) 2003 SAN People * @@ -32,6 +32,11 @@ #define AT91SAM9_MASTER_CLOCK 99300000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) +#elif defined(CONFIG_ARCH_AT91SAM9263) + +#define AT91SAM9_MASTER_CLOCK 99959500 +#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + #endif #endif diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91/uncompress.h index 34b4b93..a193d28 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91/uncompress.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/uncompress.h + * include/asm-arm/arch-at91/uncompress.h * * Copyright (C) 2003 SAN People * diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h index 0a23b8c..bb05e70 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91/vmalloc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/vmalloc.h + * include/asm-arm/arch-at91/vmalloc.h * * Copyright (C) 2003 SAN People * diff --git a/include/asm-arm/arch-at91rm9200/at91_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h deleted file mode 100644 index 79d6e02..0000000 --- a/include/asm-arm/arch-at91rm9200/at91_pdc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91_pdc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Peripheral Data Controller (PDC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PDC_H -#define AT91_PDC_H - -#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */ -#define AT91_PDC_RCR 0x104 /* Receive Counter Register */ -#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */ -#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */ -#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */ -#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */ -#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */ -#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */ - -#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */ -#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */ -#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */ -#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */ -#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */ - -#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */ - -#endif diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S deleted file mode 100644 index 85cdadf..0000000 --- a/include/asm-arm/arch-at91rm9200/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/debug-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <asm/hardware.h> -#include <asm/arch/at91_dbgu.h> - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address) - ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address) - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete - beq 1001b - .endm - diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S deleted file mode 100644 index 57248a7..0000000 --- a/include/asm-arm/arch-at91rm9200/entry-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware.h> -#include <asm/arch/at91_aic.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals - ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. - .endm - diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h index 593f562..625c6f0 100644 --- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h +++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h @@ -73,6 +73,11 @@ #define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) +#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) +#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) +#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) +#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) +#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) #define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) #define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) #define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h index ae532e304..2a8c636 100644 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ b/include/asm-arm/arch-ep93xx/irqs.h @@ -67,9 +67,13 @@ #define IRQ_EP93XX_SAI 60 #define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff -#define IRQ_EP93XX_GPIO(x) (64 + (x)) +/* + * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and + * F0..F7 to 80..87. + */ +#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f)) -#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16) +#define NR_EP93XX_IRQS (64 + 24) #define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) #define EP93XX_BOARD_IRQS 32 diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h index b4a8deb..44eccec 100644 --- a/include/asm-arm/arch-ep93xx/platform.h +++ b/include/asm-arm/arch-ep93xx/platform.h @@ -8,7 +8,6 @@ void ep93xx_map_io(void); void ep93xx_init_irq(void); void ep93xx_init_time(unsigned long); void ep93xx_init_devices(void); -void ep93xx_clock_init(void); extern struct sys_timer ep93xx_timer; struct ep93xx_eth_data diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S index 3b9ef69..61bb0bd 100644 --- a/include/asm-arm/arch-imx/entry-macro.S +++ b/include/asm-arm/arch-imx/entry-macro.S @@ -13,19 +13,13 @@ .endm #define AITC_NIVECSR 0x40 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, =IO_ADDRESS(IMX_AITC_BASE) + ldr \base, =IO_ADDRESS(IMX_AITC_BASE) @ Load offset & priority of the highest priority @ interrupt pending. - ldr \irqnr, [\irqstat, #AITC_NIVECSR] + ldr \irqstat, [\base, #AITC_NIVECSR] @ Shift off the priority leaving the offset or - @ "interrupt number" - mov \irqnr, \irqnr, lsr #16 - ldr \irqstat, =1 @ dummy compare - ldr \base, =0xFFFF // invalid interrupt - cmp \irqnr, \base - bne 1001f - ldr \irqstat, =0 -1001: - tst \irqstat, #1 @ to make the condition code = TRUE + @ "interrupt number", use arithmetic shift to + @ transform illegal source (0xffff) as -1 + mov \irqnr, \irqstat, asr #16 + adds \tmp, \irqnr, #1 .endm - diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h index 12d9ee0..5f570a5 100644 --- a/include/asm-arm/arch-iop32x/io.h +++ b/include/asm-arm/arch-iop32x/io.h @@ -13,10 +13,16 @@ #include <asm/hardware.h> -#define IO_SPACE_LIMIT 0xffffffff +extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); +extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, + unsigned long flags); +extern void __iop3xx_iounmap(void __iomem *addr); -#define __io(p) ((void __iomem *)(p)) +#define IO_SPACE_LIMIT 0xffffffff +#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) +#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) +#define __arch_iounmap(a) __iop3xx_iounmap(a) #endif diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h index c017402..1bb5071 100644 --- a/include/asm-arm/arch-iop33x/io.h +++ b/include/asm-arm/arch-iop33x/io.h @@ -13,9 +13,16 @@ #include <asm/hardware.h> +extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); +extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, + unsigned long flags); +extern void __iop3xx_iounmap(void __iomem *addr); + #define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)(p)) +#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) +#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) +#define __arch_iounmap(a) __iop3xx_iounmap(a) #endif diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h new file mode 100644 index 0000000..0dfea0c --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/avila.h @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-ixp4xx/avila.h + * + * Gateworks Avila platform specific definitions + * + * Author: Michael-Luke Jones <mlj28@cam.ac.uk> + * + * Based on ixdp425.h + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include <asm/hardware.h>" +#endif + +#define AVILA_SDA_PIN 7 +#define AVILA_SCL_PIN 6 + +/* + * AVILA PCI IRQs + */ +#define AVILA_PCI_MAX_DEV 4 +#define LOFT_PCI_MAX_DEV 6 +#define AVILA_PCI_IRQ_LINES 4 + + +/* PCI controller GPIO to IRQ pin mappings */ +#define AVILA_PCI_INTA_PIN 11 +#define AVILA_PCI_INTB_PIN 10 +#define AVILA_PCI_INTC_PIN 9 +#define AVILA_PCI_INTD_PIN 8 + + diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index 6acb69c..88fd087 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -42,6 +42,7 @@ extern unsigned int processor_id; /* Platform specific details */ #include "ixdp425.h" +#include "avila.h" #include "coyote.h" #include "prpmc1100.h" #include "nslu2.h" diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h index f24b763..e44a563 100644 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ b/include/asm-arm/arch-ixp4xx/irqs.h @@ -79,6 +79,15 @@ #define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8 /* + * Gateworks Avila board IRQs + */ +#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11 +#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10 +#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9 +#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8 + + +/* * PrPMC1100 Board IRQs */ #define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11 diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h index dbdec36..79b850a 100644 --- a/include/asm-arm/arch-ixp4xx/udc.h +++ b/include/asm-arm/arch-ixp4xx/udc.h @@ -6,3 +6,25 @@ extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); +static inline int udc_gpio_to_irq(unsigned gpio) +{ + return 0; +} + +static inline void udc_gpio_init_vbus(unsigned gpio) +{ +} + +static inline void udc_gpio_init_pullup(unsigned gpio) +{ +} + +static inline int udc_gpio_get(unsigned gpio) +{ + return 0; +} + +static inline void udc_gpio_set(unsigned gpio, int is_on) +{ +} + diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h new file mode 100644 index 0000000..91dc8fb --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/board.h @@ -0,0 +1,18 @@ +/* + * include/asm-arm/arch-ns9xxx/board.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include <asm/mach-types.h> + +#define board_is_a9m9750dev() (machine_is_cc9p9360dev()) + +#endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h new file mode 100644 index 0000000..4371a48 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/clock.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-ns9xxx/clock.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +static inline u32 ns9xxx_systemclock(void) +{ + /* + * This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c) + */ + return 353894400; +} + +static inline const u32 ns9xxx_cpuclock(void) +{ + return ns9xxx_systemclock() / 2; +} + +static inline const u32 ns9xxx_ahbclock(void) +{ + return ns9xxx_systemclock() / 4; +} + +static inline const u32 ns9xxx_bbusclock(void) +{ + return ns9xxx_systemclock() / 8; +} + +#endif /* ifndef __ASM_ARCH_CLOCK_H */ diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S new file mode 100644 index 0000000..b21b93e --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/debug-macro.S @@ -0,0 +1,22 @@ +/* + * include/asm-arm/arch-ns9xxx/debug-macro.S + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <asm/hardware.h> + +#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) + ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h new file mode 100644 index 0000000..a67cbbe --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/dma.h @@ -0,0 +1,14 @@ +/* + * include/asm-arm/arch-ns9xxx/dma.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#endif /* ifndef __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S new file mode 100644 index 0000000..467a198 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -0,0 +1,22 @@ +/* + * include/asm-arm/arch-ns9xxx/entry-macro.S + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <asm/hardware.h> +#include <asm/arch-ns9xxx/regs-sys.h> + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =SYS_ISRADDR + ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] + cmp \irqstat, #0 + ldrne \irqnr, [\base] + .endm + + .macro disable_fiq + .endm diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h new file mode 100644 index 0000000..6819da7 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/hardware.h @@ -0,0 +1,67 @@ +/* + * include/asm-arm/arch-ns9xxx/hardware.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/memory.h> + +/* + * NetSilicon NS9xxx internal mapping: + * + * physical <--> virtual + * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff + * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff + */ +#define io_p2v(x) (0xf0000000 \ + + (((x) & 0xf0000000) >> 4) \ + + ((x) & 0x00ffffff)) + +#define io_v2p(x) ((((x) & 0x0f000000) << 4) \ + + ((x) & 0x00ffffff)) + +#define __REGBIT(bit) ((u32)1 << (bit)) +#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit)) +#define __REGVAL(mask, value) (((value) * ((mask) & (-(mask))) & (mask))) + +#ifndef __ASSEMBLY__ + +# define __REG(x) (*((volatile u32 *)io_p2v((x)))) +# define __REG2(x, y) (*((volatile u32 *)io_p2v((x)) + (y))) + +# define __REGB(x) (*((volatile u8 *)io_p2v((x)))) +# define __REGB2(x) (*((volatile u8 *)io_p2v((x)) + (y))) + +# define REGSET(var, reg, field, value) \ + ((var) = (((var) \ + & ~(reg ## _ ## field & \ + ~ reg ## _ ## field ## _ ## value)) \ + | (reg ## _ ## field ## _ ## value))) + +# define REGSETIM(var, reg, field, value) \ + ((var) = (((var) \ + & ~(reg ## _ ## field & \ + ~(__REGVAL(reg ## _ ## field, value)))) \ + | (__REGVAL(reg ## _ ## field, value)))) + +# define REGGET(reg, field) \ + ((reg & (reg ## _ ## field)) / (field & (-field))) + +#else + +# define __REG(x) io_p2v(x) +# define __REG2(x, y) io_p2v((x) + (y)) + +# define __REGB(x) __REG((x)) +# define __REGB2(x, y) __REG2((x), (y)) + +#endif + +#endif /* ifndef __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h new file mode 100644 index 0000000..6f82d28 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/io.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-ns9xxx/io.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff /* XXX */ + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) +#define __mem_isa(a) (IO_BASE + (a)) + +#endif /* ifndef __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h new file mode 100644 index 0000000..25d8d28 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/irqs.h @@ -0,0 +1,85 @@ +/* + * include/asm-arm/arch-ns9xxx/irqs.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define IRQ_WATCHDOG 0 +#define IRQ_AHBBUSERR 1 +#define IRQ_BBUSAGG 2 +/* irq 3 is reserved for NS9360 */ +#define IRQ_ETHRX 4 +#define IRQ_ETHTX 5 +#define IRQ_ETHPHY 6 +#define IRQ_LCD 7 +#define IRQ_SERBRX 8 +#define IRQ_SERBTX 9 +#define IRQ_SERARX 10 +#define IRQ_SERATX 11 +#define IRQ_SERCRX 12 +#define IRQ_SERCTX 13 +#define IRQ_I2C 14 +#define IRQ_BBUSDMA 15 +#define IRQ_TIMER0 16 +#define IRQ_TIMER1 17 +#define IRQ_TIMER2 18 +#define IRQ_TIMER3 19 +#define IRQ_TIMER4 20 +#define IRQ_TIMER5 21 +#define IRQ_TIMER6 22 +#define IRQ_TIMER7 23 +#define IRQ_RTC 24 +#define IRQ_USBHOST 25 +#define IRQ_USBDEVICE 26 +#define IRQ_IEEE1284 27 +#define IRQ_EXT0 28 +#define IRQ_EXT1 29 +#define IRQ_EXT2 30 +#define IRQ_EXT3 31 + +#define BBUS_IRQ(irq) (32 + irq) + +#define IRQ_BBUS_DMA BBUS_IRQ(0) +#define IRQ_BBUS_SERBRX BBUS_IRQ(2) +#define IRQ_BBUS_SERBTX BBUS_IRQ(3) +#define IRQ_BBUS_SERARX BBUS_IRQ(4) +#define IRQ_BBUS_SERATX BBUS_IRQ(5) +#define IRQ_BBUS_SERCRX BBUS_IRQ(6) +#define IRQ_BBUS_SERCTX BBUS_IRQ(7) +#define IRQ_BBUS_SERDRX BBUS_IRQ(8) +#define IRQ_BBUS_SERDTX BBUS_IRQ(9) +#define IRQ_BBUS_I2C BBUS_IRQ(10) +#define IRQ_BBUS_1284 BBUS_IRQ(11) +#define IRQ_BBUS_UTIL BBUS_IRQ(12) +#define IRQ_BBUS_RTC BBUS_IRQ(13) +#define IRQ_BBUS_USBHST BBUS_IRQ(14) +#define IRQ_BBUS_USBDEV BBUS_IRQ(15) +#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24) +#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25) + +/* + * these Interrupts are specific for the a9m9750dev board. + * They are generated by an FPGA that interrupts the CPU on + * IRQ_EXT2 + */ +#define FPGA_IRQ(irq) (64 + irq) + +#define IRQ_FPGA_UARTA FPGA_IRQ(0) +#define IRQ_FPGA_UARTB FPGA_IRQ(1) +#define IRQ_FPGA_UARTC FPGA_IRQ(2) +#define IRQ_FPGA_UARTD FPGA_IRQ(3) +#define IRQ_FPGA_TOUCH FPGA_IRQ(4) +#define IRQ_FPGA_CF FPGA_IRQ(5) +#define IRQ_FPGA_CAN0 FPGA_IRQ(6) +#define IRQ_FPGA_CAN1 FPGA_IRQ(7) + +#define NR_IRQS 72 + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h new file mode 100644 index 0000000..ce1343e --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/memory.h @@ -0,0 +1,27 @@ +/* + * include/asm-arm/arch-ns9xxx/memory.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. +*/ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* x in [0..3] */ +#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28) + +#define NS9XXX_CS0STAT_LENGTH UL(0x1000) +#define NS9XXX_CS1STAT_LENGTH UL(0x1000) +#define NS9XXX_CS2STAT_LENGTH UL(0x1000) +#define NS9XXX_CS3STAT_LENGTH UL(0x1000) + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h new file mode 100644 index 0000000..716c106 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -0,0 +1,18 @@ +/* + * include/asm-arm/arch-ns9xxx/processor.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PROCESSOR_H +#define __ASM_ARCH_PROCESSOR_H + +#include <asm/mach-types.h> + +#define processor_is_ns9360() (machine_is_cc9p9360dev()) + +#endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h new file mode 100644 index 0000000..e262695 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-bbu.h @@ -0,0 +1,21 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-bbu.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_REGSBBU_H +#define __ASM_ARCH_REGSBBU_H + +#include <asm/hardware.h> + +/* BBus Utility */ + +/* GPIO Configuration Register */ +#define BBU_GC(x) __REG2(0x9060000c, (x)) + +#endif /* ifndef __ASM_ARCH_REGSBBU_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h new file mode 100644 index 0000000..c3dc532 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h @@ -0,0 +1,24 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_REGSBOARDA9M9750_H +#define __ASM_ARCH_REGSBOARDA9M9750_H + +#include <asm/hardware.h> + +#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0)) +#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08) +#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10) +#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18) + +#define FPGA_IER __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x50) +#define FPGA_ISR __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x60) + +#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h new file mode 100644 index 0000000..8ed8448 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-mem.h @@ -0,0 +1,135 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-mem.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_REGSMEM_H +#define __ASM_ARCH_REGSMEM_H + +#include <asm/hardware.h> + +/* Memory Module */ + +/* Control register */ +#define MEM_CTRL __REG(0xa0700000) + +/* Status register */ +#define MEM_STAT __REG(0xa0700004) + +/* Configuration register */ +#define MEM_CONF __REG(0xa0700008) + +/* Dynamic Memory Control register */ +#define MEM_DMCTRL __REG(0xa0700020) + +/* Dynamic Memory Refresh Timer */ +#define MEM_DMRT __REG(0xa0700024) + +/* Dynamic Memory Read Configuration register */ +#define MEM_DMRC __REG(0xa0700028) + +/* Dynamic Memory Precharge Command Period (tRP) */ +#define MEM_DMPCP __REG(0xa0700030) + +/* Dynamic Memory Active to Precharge Command Period (tRAS) */ +#define MEM_DMAPCP __REG(0xa0700034) + +/* Dynamic Memory Self-Refresh Exit Time (tSREX) */ +#define MEM_DMSRET __REG(0xa0700038) + +/* Dynamic Memory Last Data Out to Active Time (tAPR) */ +#define MEM_DMLDOAT __REG(0xa070003c) + +/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */ +#define MEM_DMDIACT __REG(0xa0700040) + +/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */ +#define MEM_DMWRT __REG(0xa0700044) + +/* Dynamic Memory Active to Active Command Period (tRC) */ +#define MEM_DMAACP __REG(0xa0700048) + +/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */ +#define MEM_DMARP __REG(0xa070004c) + +/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */ +#define MEM_DMESRAC __REG(0xa0700050) + +/* Dynamic Memory Active Bank A to Active B Time (tRRD) */ +#define MEM_DMABAABT __REG(0xa0700054) + +/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */ +#define MEM_DMLMACT __REG(0xa0700058) + +/* Static Memory Extended Wait */ +#define MEM_SMEW __REG(0xa0700080) + +/* Dynamic Memory Configuration Register x */ +#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3) + +/* Dynamic Memory RAS and CAS Delay x */ +#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3) + +/* Static Memory Configuration Register x */ +#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3) + +/* Static Memory Configuration Register x: Write protect */ +#define MEM_SMC_WSMC __REGBIT(20) +#define MEM_SMC_WSMC_OFF __REGVAL(MEM_SMC_WSMC, 0) +#define MEM_SMC_WSMC_ON __REGVAL(MEM_SMC_WSMC, 1) + +/* Static Memory Configuration Register x: Buffer enable */ +#define MEM_SMC_BSMC __REGBIT(19) +#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0) +#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1) + +/* Static Memory Configuration Register x: Extended Wait */ +#define MEM_SMC_EW __REGBIT(8) +#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0) +#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1) + +/* Static Memory Configuration Register x: Byte lane state */ +#define MEM_SMC_PB __REGBIT(7) +#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0) +#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1) + +/* Static Memory Configuration Register x: Chip select polarity */ +#define MEM_SMC_PC __REGBIT(6) +#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0) +#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1) + +/* static memory configuration register x: page mode*/ +#define MEM_SMC_PM __REGBIT(3) +#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0) +#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1) + +/* static memory configuration register x: Memory width */ +#define MEM_SMC_MW __REGBITS(1, 0) +#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0) +#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1) +#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2) + +/* Static Memory Write Enable Delay x */ +#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3) + +/* Static Memory Output Enable Delay x */ +#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3) + +/* Static Memory Read Delay x */ +#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3) + +/* Static Memory Page Mode Read Delay 0 */ +#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3) + +/* Static Memory Write Delay */ +#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3) + +/* Static Memory Turn Round Delay x */ +#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3) + +#endif /* ifndef __ASM_ARCH_REGSMEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h new file mode 100644 index 0000000..8162a50 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-sys.h @@ -0,0 +1,157 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-sys.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_REGSSYS_H +#define __ASM_ARCH_REGSSYS_H + +#include <asm/hardware.h> + +/* System Control Module */ + +/* AHB Arbiter Gen Configuration */ +#define SYS_AHBAGENCONF __REG(0xa0900000) + +/* BRC */ +#define SYS_BRC(x) __REG2(0xa0900004, (x)) + +/* Timer x Reload Count register */ +#define SYS_TRC(x) __REG2(0xa0900044, (x)) + +/* Timer x Read register */ +#define SYS_TR(x) __REG2(0xa0900084, (x)) + +/* Interrupt Vector Address Register Level x */ +#define SYS_IVA(x) __REG2(0xa09000c4, (x)) + +/* Interrupt Configuration registers */ +#define SYS_IC(x) __REG2(0xa0900144, (x)) + +/* ISRADDR */ +#define SYS_ISRADDR __REG(0xa0900164) + +/* Interrupt Status Active */ +#define SYS_ISA __REG(0xa0900168) + +/* Interrupt Status Raw */ +#define SYS_ISR __REG(0xa090016c) + +/* Timer Interrupt Status register */ +#define SYS_TIS __REG(0xa0900170) + +/* PLL Configuration register */ +#define SYS_PLL __REG(0xa0900188) + +/* PLL Configuration register: PLL SW change */ +#define SYS_PLL_SWC __REGBIT(15) +#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) +#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) + +/* Timer x Control register */ +#define SYS_TC(x) __REG2(0xa0900190, (x)) + +/* Timer x Control register: Timer enable */ +#define SYS_TCx_TEN __REGBIT(15) +#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 1) +#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) + +/* Timer x Control register: CPU debug mode */ +#define SYS_TCx_TDBG __REGBIT(10) +#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) +#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) + +/* Timer x Control register: Interrupt clear */ +#define SYS_TCx_INTC __REGBIT(9) +#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) +#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) + +/* Timer x Control register: Timer clock select */ +#define SYS_TCx_TLCS __REGBITS(8, 6) +#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ +#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ +#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ +#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ +#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ +#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ +#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ +#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) + +/* Timer x Control register: Timer mode */ +#define SYS_TCx_TM __REGBITS(5, 4) +#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ +#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ +#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ +#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ + +/* Timer x Control register: Interrupt select */ +#define SYS_TCx_INTS __REGBIT(3) +#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) +#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) + +/* Timer x Control register: Up/down select */ +#define SYS_TCx_UDS __REGBIT(2) +#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) +#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) + +/* Timer x Control register: 32- or 16-bit timer */ +#define SYS_TCx_TSZ __REGBIT(1) +#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) +#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) + +/* Timer x Control register: Reload enable */ +#define SYS_TCx_REN __REGBIT(0) +#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) +#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) + +/* System Memory Chip Select x Dynamic Memory Base */ +#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) + +/* System Memory Chip Select x Dynamic Memory Mask */ +#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) + +/* System Memory Chip Select x Static Memory Base */ +#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) + +/* System Memory Chip Select x Static Memory Base: Chip select x base */ +#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) + +/* System Memory Chip Select x Static Memory Mask */ +#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) + +/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ +#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) + +/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ +#define SYS_SMCSSMM_CSEx __REGBIT(0) +#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) +#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) + +/* General purpose, user-defined ID register */ +#define SYS_GENID __REG(0xa0900210) + +/* External Interrupt x Control register */ +#define SYS_EIC(x) __REG2(0xa0900214, (x)) + +/* External Interrupt x Control register: Status */ +#define SYS_EIC_STS __REGBIT(3) + +/* External Interrupt x Control register: Clear */ +#define SYS_EIC_CLR __REGBIT(2) + +/* External Interrupt x Control register: Polarity */ +#define SYS_EIC_PLTY __REGBIT(1) +#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) +#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) + +/* External Interrupt x Control register: Level edge */ +#define SYS_EIC_LVEDG __REGBIT(0) +#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) +#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) + +#endif /* ifndef __ASM_ARCH_REGSSYS_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h new file mode 100644 index 0000000..e3cd4d3 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -0,0 +1,34 @@ +/* + * include/asm-arm/arch-ns9xxx/system.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/proc-fns.h> +#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/mach-types.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + u32 reg; + + reg = SYS_PLL >> 16; + REGSET(reg, SYS_PLL, SWC, YES); + SYS_PLL = reg; + + BUG(); +} + +#endif /* ifndef __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h new file mode 100644 index 0000000..f776cbd --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/timex.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-ns9xxx/timex.h + * + * Copyright (C) 2005-2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* + * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h. + * See there for an explanation. + */ +#define CLOCK_TICK_RATE 12000000 + +#endif /* ifndef __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h new file mode 100644 index 0000000..961ca7d --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/uncompress.h @@ -0,0 +1,35 @@ +/* + * include/asm-arm/arch-ns9xxx/uncompress.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +static void putc(char c) +{ + volatile u8 *base = (volatile u8 *)0x40000000; + int t = 0x10000; + + do { + if (base[5] & 0x20) { + base[0] = c; + break; + } + } while (--t); +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + +static void flush(void) +{ + /* nothing */ +} + +#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h new file mode 100644 index 0000000..2f3cb6f --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/vmalloc.h @@ -0,0 +1,16 @@ +/* + * include/asm-arm/arch-ns9xxx/vmalloc.h + * + * Copyright (C) 2006 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xf0000000) + +#endif /* ifndef __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e24f6b6..aec835b 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -463,9 +463,6 @@ * Serial Audio Controller */ -/* FIXME: This clash with SA1111 defines */ -#ifndef _ASM_ARCH_SA1111 - #define SACR0 __REG(0x40400000) /* Global Control Register */ #define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ #define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ @@ -474,8 +471,8 @@ #define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ #define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ -#define SACR0_RFTH(x) (x << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) (x << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ #define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ #define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ #define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ @@ -503,8 +500,6 @@ #define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ #define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ -#endif - /* * AC97 Controller registers */ @@ -1682,15 +1677,18 @@ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) (x << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) (x << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) (x << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) (x << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) (x << 4) /* Start Delay */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ #define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ #define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) (x << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ #define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */ #define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */ diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h index 646480d..8bc6f9c 100644 --- a/include/asm-arm/arch-pxa/udc.h +++ b/include/asm-arm/arch-pxa/udc.h @@ -9,3 +9,33 @@ extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); +static inline int udc_gpio_to_irq(unsigned gpio) +{ + return IRQ_GPIO(gpio & GPIO_MD_MASK_NR); +} + +static inline void udc_gpio_init_vbus(unsigned gpio) +{ + pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_IN); +} + +static inline void udc_gpio_init_pullup(unsigned gpio) +{ + pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_OUT | GPIO_DFLT_LOW); +} + +static inline int udc_gpio_get(unsigned gpio) +{ + return (GPLR(gpio) & GPIO_bit(gpio)) != 0; +} + +static inline void udc_gpio_set(unsigned gpio, int is_on) +{ + int mask = GPIO_bit(gpio); + + if (is_on) + GPSR(gpio) = mask; + else + GPCR(gpio) = mask; +} + diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index 9ca76dc..aa78fe0 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -26,7 +26,7 @@ #include <asm/arch/platform.h> /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000) #define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h index c16223c..5a5db56 100644 --- a/include/asm-arm/arch-realview/irqs.h +++ b/include/asm-arm/arch-realview/irqs.h @@ -65,6 +65,21 @@ #define IRQ_AACI (IRQ_GIC_START + INT_AACI) #define IRQ_ETH (IRQ_GIC_START + INT_ETH) #define IRQ_USB (IRQ_GIC_START + INT_USB) +#define IRQ_PMU_CPU0 (IRQ_GIC_START + INT_PMU_CPU0) +#define IRQ_PMU_CPU1 (IRQ_GIC_START + INT_PMU_CPU1) +#define IRQ_PMU_CPU2 (IRQ_GIC_START + INT_PMU_CPU2) +#define IRQ_PMU_CPU3 (IRQ_GIC_START + INT_PMU_CPU3) +#define IRQ_PMU_SCU0 (IRQ_GIC_START + INT_PMU_SCU0) +#define IRQ_PMU_SCU1 (IRQ_GIC_START + INT_PMU_SCU1) +#define IRQ_PMU_SCU2 (IRQ_GIC_START + INT_PMU_SCU2) +#define IRQ_PMU_SCU3 (IRQ_GIC_START + INT_PMU_SCU3) +#define IRQ_PMU_SCU4 (IRQ_GIC_START + INT_PMU_SCU4) +#define IRQ_PMU_SCU5 (IRQ_GIC_START + INT_PMU_SCU5) +#define IRQ_PMU_SCU6 (IRQ_GIC_START + INT_PMU_SCU6) +#define IRQ_PMU_SCU7 (IRQ_GIC_START + INT_PMU_SCU7) + +#define IRQ_EB_IRQ1 (IRQ_GIC_START + INT_EB_IRQ1) +#define IRQ_EB_IRQ2 (IRQ_GIC_START + INT_EB_IRQ2) #define IRQMASK_WDOGINT INTMASK_WDOGINT #define IRQMASK_SOFTINT INTMASK_SOFTINT @@ -103,4 +118,4 @@ #define IRQMASK_ETH INTMASK_ETH #define IRQMASK_USB INTMASK_USB -#define NR_IRQS (IRQ_GIC_START + 64) +#define NR_IRQS (IRQ_GIC_START + 96) diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h index 18d7c18..6e0eab9 100644 --- a/include/asm-arm/arch-realview/platform.h +++ b/include/asm-arm/arch-realview/platform.h @@ -207,11 +207,25 @@ #define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ #define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ #else +#ifdef CONFIG_REALVIEW_MPCORE_REVB #define REALVIEW_MPCORE_SCU_BASE 0x10100000 /* SCU registers */ #define REALVIEW_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ #define REALVIEW_TWD_BASE 0x10100700 #define REALVIEW_TWD_SIZE 0x00000100 #define REALVIEW_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_MPCORE_L220_BASE 0x10102000 /* L220 registers */ +#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ +#else +#define REALVIEW_MPCORE_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ +#define REALVIEW_TWD_BASE 0x1F000700 +#define REALVIEW_TWD_SIZE 0x00000100 +#define REALVIEW_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_MPCORE_L220_BASE 0x1F002000 /* L220 registers */ +#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ +#endif +#define REALVIEW_GIC1_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_GIC1_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ #endif #define REALVIEW_SMC_BASE 0x10080000 /* SMC */ /* Reserved 0x10090000 - 0x100EFFFF */ @@ -306,7 +320,11 @@ #define INT_USB 29 /* USB controller */ #define INT_TSPENINT 30 /* Touchscreen pen */ #define INT_TSKPADINT 31 /* Touchscreen keypad */ + #else + +#define MAX_GIC_NR 2 + #define INT_AACI 0 #define INT_TIMERINT0_1 1 #define INT_TIMERINT2_3 2 diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h new file mode 100644 index 0000000..cc29364 --- /dev/null +++ b/include/asm-arm/arch-realview/scu.h @@ -0,0 +1,8 @@ +#ifndef __ASMARM_ARCH_SCU_H +#define __ASMARM_ARCH_SCU_H + +#include <asm/arch/platform.h> + +#define SCU_BASE REALVIEW_MPCORE_SCU_BASE + +#endif diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index 58ffa7b..c6e8d8f 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -51,13 +51,19 @@ enum dma_ch { DMACH_UART0_SRC2, /* s3c2412 second uart sources */ DMACH_UART1_SRC2, DMACH_UART2_SRC2, + DMACH_UART3, /* s3c2443 has extra uart */ + DMACH_UART3_SRC2, DMACH_MAX, /* the end entry */ }; #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ -#define S3C2410_DMA_CHANNELS (4) +#ifndef CONFIG_CPU_S3C2443 +#define S3C2410_DMA_CHANNELS (4) +#else +#define S3C2410_DMA_CHANNELS (6) +#endif /* types */ @@ -321,6 +327,7 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); #define S3C2410_DMA_DCDST (0x1C) #define S3C2410_DMA_DMASKTRIG (0x20) #define S3C2412_DMA_DMAREQSEL (0x24) +#define S3C2443_DMA_DMAREQSEL (0x24) #define S3C2410_DISRCC_INC (1<<0) #define S3C2410_DISRCC_APB (1<<1) @@ -415,4 +422,31 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) #endif + +#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2443_DMAREQSEL_HW (1) + +#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) +#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) +#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) +#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) +#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) +#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) +#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) +#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) +#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) +#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) +#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) +#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) +#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) +#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) +#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) +#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) +#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) +#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) +#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) + #endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h index 4b7cff4..c79cb18 100644 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -34,10 +34,10 @@ #define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ #define IRQ_EINT8t23 S3C2410_IRQ(5) #define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ -#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440 */ +#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ #define IRQ_BATT_FLT S3C2410_IRQ(7) #define IRQ_TICK S3C2410_IRQ(8) /* 24 */ -#define IRQ_WDT S3C2410_IRQ(9) +#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ #define IRQ_TIMER0 S3C2410_IRQ(10) #define IRQ_TIMER1 S3C2410_IRQ(11) #define IRQ_TIMER2 S3C2410_IRQ(12) @@ -45,7 +45,7 @@ #define IRQ_TIMER4 S3C2410_IRQ(14) #define IRQ_UART2 S3C2410_IRQ(15) #define IRQ_LCD S3C2410_IRQ(16) /* 32 */ -#define IRQ_DMA0 S3C2410_IRQ(17) +#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ #define IRQ_DMA1 S3C2410_IRQ(18) #define IRQ_DMA2 S3C2410_IRQ(19) #define IRQ_DMA3 S3C2410_IRQ(20) @@ -94,29 +94,63 @@ * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define IRQ_S3CUART_RX0 S3C2410_IRQ(54) /* 70 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQ(55) /* 71 */ -#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56) -#define IRQ_S3CUART_RX1 S3C2410_IRQ(57) -#define IRQ_S3CUART_TX1 S3C2410_IRQ(58) -#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) -#define IRQ_S3CUART_RX2 S3C2410_IRQ(60) -#define IRQ_S3CUART_TX2 S3C2410_IRQ(61) -#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62) +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) +#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_TC S3C2410_IRQ(63) -#define IRQ_ADC S3C2410_IRQ(64) +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) +#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -/* extra irqs for s3c2440 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) +#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) -#define IRQ_S3C2440_CAM_C S3C2410_IRQ(65) -#define IRQ_S3C2440_CAM_P S3C2410_IRQ(66) -#define IRQ_S3C2440_WDT S3C2410_IRQ(67) -#define IRQ_S3C2440_AC97 S3C2410_IRQ(68) +#define IRQ_TC S3C2410_IRQSUB(9) +#define IRQ_ADC S3C2410_IRQSUB(10) -#define NR_IRQS (IRQ_S3C2440_AC97+1) +/* extra irqs for s3c2440 */ +#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ +#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ +#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) +#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) + +/* irqs for s3c2443 */ + +#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ +#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ +#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ +#define IRQ_S3C2443_SDI1 S3C2410_IRQ(20) /* IRQ_SDI */ +#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ + +#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) +#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) +#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) +#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) + +#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) +#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) +#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) +#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) +#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) +#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) + +/* UART3 */ +#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) +#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) +#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) + +#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) +#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) + +#ifdef CONFIG_CPU_S3C2443 +#define NR_IRQS (IRQ_S3C2443_AC97+1) +#else +#define NR_IRQS (IRQ_S3C2440_AC97+1) +#endif #endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h index 3196a28..c7f2319 100644 --- a/include/asm-arm/arch-s3c2410/regs-adc.h +++ b/include/asm-arm/arch-s3c2410/regs-adc.h @@ -41,7 +41,7 @@ #define S3C2410_ADCTSC_XP_SEN (1<<4) #define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) #define S3C2410_ADCTSC_AUTO_PST (1<<2) -#define S3C2410_ADCTSC_XY_PST (0x3<<0) +#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) /* ADCDAT0 Bits */ #define S3C2410_ADCDAT0_UPDOWN (1<<15) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index eae9169..dea578b 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -201,7 +201,7 @@ #define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) #define S3C2400_GPBUP S3C2410_GPIOREG(0x10) -/* no i/o pin in port b can have value 3! */ +/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ #define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) #define S3C2410_GPB0_INP (0x00 << 0) @@ -242,6 +242,7 @@ #define S3C2410_GPB5_INP (0x00 << 10) #define S3C2410_GPB5_OUTP (0x01 << 10) #define S3C2410_GPB5_nXBACK (0x02 << 10) +#define S3C2443_GPB5_XBACK (0x03 << 10) #define S3C2400_GPB5_DATA21 (0x02 << 10) #define S3C2400_GPB5_nCTS1 (0x03 << 10) @@ -249,6 +250,7 @@ #define S3C2410_GPB6_INP (0x00 << 12) #define S3C2410_GPB6_OUTP (0x01 << 12) #define S3C2410_GPB6_nXBREQ (0x02 << 12) +#define S3C2443_GPB6_XBREQ (0x03 << 12) #define S3C2400_GPB6_DATA22 (0x02 << 12) #define S3C2400_GPB6_nRTS1 (0x03 << 12) @@ -256,6 +258,7 @@ #define S3C2410_GPB7_INP (0x00 << 14) #define S3C2410_GPB7_OUTP (0x01 << 14) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) +#define S3C2443_GPB7_XDACK1 (0x03 << 14) #define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) @@ -268,6 +271,7 @@ #define S3C2410_GPB9_INP (0x00 << 18) #define S3C2410_GPB9_OUTP (0x01 << 18) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) +#define S3C2443_GPB9_XDACK0 (0x03 << 18) #define S3C2400_GPB9_DATA25 (0x02 << 18) #define S3C2400_GPB9_I2SSDI (0x03 << 18) @@ -275,6 +279,7 @@ #define S3C2410_GPB10_INP (0x00 << 20) #define S3C2410_GPB10_OUTP (0x01 << 20) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) +#define S3C2443_GPB10_XDREQ0 (0x03 << 20) #define S3C2400_GPB10_DATA26 (0x02 << 20) #define S3C2400_GPB10_nSS (0x03 << 20) @@ -556,6 +561,7 @@ #define S3C2410_GPE0_INP (0x00 << 0) #define S3C2410_GPE0_OUTP (0x01 << 0) #define S3C2410_GPE0_I2SLRCK (0x02 << 0) +#define S3C2443_GPE0_AC_nRESET (0x03 << 0) #define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) @@ -563,6 +569,7 @@ #define S3C2410_GPE1_INP (0x00 << 2) #define S3C2410_GPE1_OUTP (0x01 << 2) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) +#define S3C2443_GPE1_AC_SYNC (0x03 << 2) #define S3C2400_GPE1_EINT1 (0x02 << 2) #define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) @@ -571,6 +578,7 @@ #define S3C2410_GPE2_INP (0x00 << 4) #define S3C2410_GPE2_OUTP (0x01 << 4) #define S3C2410_GPE2_CDCLK (0x02 << 4) +#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) #define S3C2400_GPE2_EINT2 (0x02 << 4) #define S3C2400_GPE2_I2SSDI (0x03 << 4) @@ -578,6 +586,7 @@ #define S3C2410_GPE3_INP (0x00 << 6) #define S3C2410_GPE3_OUTP (0x01 << 6) #define S3C2410_GPE3_I2SSDI (0x02 << 6) +#define S3C2443_GPE3_AC_SDI (0x03 << 6) #define S3C2400_GPE3_EINT3 (0x02 << 6) #define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) @@ -587,6 +596,7 @@ #define S3C2410_GPE4_INP (0x00 << 8) #define S3C2410_GPE4_OUTP (0x01 << 8) #define S3C2410_GPE4_I2SSDO (0x02 << 8) +#define S3C2443_GPE4_AC_SDO (0x03 << 8) #define S3C2400_GPE4_EINT4 (0x02 << 8) #define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) @@ -596,6 +606,7 @@ #define S3C2410_GPE5_INP (0x00 << 10) #define S3C2410_GPE5_OUTP (0x01 << 10) #define S3C2410_GPE5_SDCLK (0x02 << 10) +#define S3C2443_GPE5_SD1_CLK (0x02 << 10) #define S3C2400_GPE5_EINT5 (0x02 << 10) #define S3C2400_GPE5_TCLK1 (0x03 << 10) @@ -603,24 +614,32 @@ #define S3C2410_GPE6_INP (0x00 << 12) #define S3C2410_GPE6_OUTP (0x01 << 12) #define S3C2410_GPE6_SDCMD (0x02 << 12) +#define S3C2443_GPE6_SD1_CMD (0x02 << 12) +#define S3C2443_GPE6_AC_BITCLK (0x03 << 12) #define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) #define S3C2410_GPE7_INP (0x00 << 14) #define S3C2410_GPE7_OUTP (0x01 << 14) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) +#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) +#define S3C2443_GPE7_AC_SDI (0x03 << 14) #define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) #define S3C2410_GPE8_INP (0x00 << 16) #define S3C2410_GPE8_OUTP (0x01 << 16) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) +#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) +#define S3C2443_GPE8_AC_SDO (0x03 << 16) #define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) #define S3C2410_GPE9_INP (0x00 << 18) #define S3C2410_GPE9_OUTP (0x01 << 18) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) +#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) +#define S3C2443_GPE9_AC_SYNC (0x03 << 18) #define S3C2400_GPE9_nXDACK1 (0x02 << 18) #define S3C2400_GPE9_nXBACK (0x03 << 18) @@ -628,6 +647,8 @@ #define S3C2410_GPE10_INP (0x00 << 20) #define S3C2410_GPE10_OUTP (0x01 << 20) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) +#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) +#define S3C2443_GPE10_AC_nRESET (0x03 << 20) #define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) @@ -796,6 +817,7 @@ #define S3C2400_GPG4_MMCCLK (0x02 << 8) #define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) +#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) #define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) #define S3C2410_GPG5_INP (0x00 << 10) @@ -803,7 +825,7 @@ #define S3C2410_GPG5_EINT13 (0x02 << 10) #define S3C2400_GPG5_MMCCMD (0x02 << 10) #define S3C2400_GPG5_IICSDA (0x03 << 10) -#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) +#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ #define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) #define S3C2410_GPG6_INP (0x00 << 12) @@ -845,6 +867,7 @@ #define S3C2410_GPG11_OUTP (0x01 << 22) #define S3C2410_GPG11_EINT19 (0x02 << 22) #define S3C2410_GPG11_TCLK1 (0x03 << 22) +#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) #define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) #define S3C2410_GPG12_INP (0x00 << 24) @@ -852,25 +875,28 @@ #define S3C2410_GPG12_EINT20 (0x02 << 24) #define S3C2410_GPG12_XMON (0x03 << 24) #define S3C2442_GPG12_nSPICS0 (0x03 << 24) +#define S3C2443_GPG12_nINPACK (0x03 << 24) #define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) #define S3C2410_GPG13_INP (0x00 << 26) #define S3C2410_GPG13_OUTP (0x01 << 26) #define S3C2410_GPG13_EINT21 (0x02 << 26) #define S3C2410_GPG13_nXPON (0x03 << 26) +#define S3C2443_GPG13_CF_nREG (0x03 << 26) #define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) #define S3C2410_GPG14_INP (0x00 << 28) #define S3C2410_GPG14_OUTP (0x01 << 28) #define S3C2410_GPG14_EINT22 (0x02 << 28) #define S3C2410_GPG14_YMON (0x03 << 28) +#define S3C2443_GPG14_CF_RESET (0x03 << 28) #define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) #define S3C2410_GPG15_INP (0x00 << 30) #define S3C2410_GPG15_OUTP (0x01 << 30) #define S3C2410_GPG15_EINT23 (0x02 << 30) #define S3C2410_GPG15_nYPON (0x03 << 30) - +#define S3C2443_GPG15_CF_PWR (0x03 << 30) #define S3C2410_GPG_PUPDIS(x) (1<<(x)) diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h new file mode 100644 index 0000000..ff0536d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h @@ -0,0 +1,194 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-clock.h + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2443 clock register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2443_CLOCK +#define __ASM_ARM_REGS_S3C2443_CLOCK + +#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2443_PLLCON_MDIVSHIFT 16 +#define S3C2443_PLLCON_PDIVSHIFT 8 +#define S3C2443_PLLCON_SDIVSHIFT 0 +#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) +#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) +#define S3C2443_PLLCON_SDIVMASK (3) + +#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) +#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) +#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) +#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) +#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) +#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) +#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) +#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) +#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) +#define S3C2443_SWRST S3C2443_CLKREG(0x44) +#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) +#define S3C2443_SYSID S3C2443_CLKREG(0x5C) +#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) +#define S3C2443_RSTCON S3C2443_CLKREG(0x64) + +#define S3C2443_SWRST_RESET (0x533c2443) + +#define S3C2443_PLLCON_OFF (1<<24) + +#define S3C2443_CLKSRC_I2S_EXT (1<<14) +#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14) +#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14) +#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) +#define S3C2443_CLKSRC_I2S_MASK (3<<14) + +#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) +#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) +#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) + +#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) +#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) +#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) + +#define S3C2443_CLKDIV0_DVS (1<<13) +#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) +#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) + +#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) + +#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) +#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) + +#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) +#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) + +#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) +#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) +#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) +#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) +#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) +#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) +#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) +#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) +#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) +#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) + +/* S3C2443_CLKDIV1 */ + +#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26) +#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26) + +#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24) +#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24) + +#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16) +#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16) + +#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12) +#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12) + +#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8) +#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8) + +#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6) +#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6) + +#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4) +#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4) + +#define S3C2443_CLKCON_NAND + +#define S3C2443_HCLKCON_DMA0 (1<<0) +#define S3C2443_HCLKCON_DMA1 (1<<1) +#define S3C2443_HCLKCON_DMA2 (1<<2) +#define S3C2443_HCLKCON_DMA3 (1<<3) +#define S3C2443_HCLKCON_DMA4 (1<<4) +#define S3C2443_HCLKCON_DMA5 (1<<5) +#define S3C2443_HCLKCON_CAMIF (1<<8) +#define S3C2443_HCLKCON_DISP (1<<9) +#define S3C2443_HCLKCON_LCDC (1<<10) +#define S3C2443_HCLKCON_USBH (1<<11) +#define S3C2443_HCLKCON_USBD (1<<12) +#define S3C2443_HCLKCON_HSMMC (1<<16) +#define S3C2443_HCLKCON_CFC (1<<17) +#define S3C2443_HCLKCON_SSMC (1<<18) +#define S3C2443_HCLKCON_DRAMC (1<<19) + +#define S3C2443_PCLKCON_UART0 (1<<0) +#define S3C2443_PCLKCON_UART1 (1<<1) +#define S3C2443_PCLKCON_UART2 (1<<2) +#define S3C2443_PCLKCON_UART3 (1<<3) +#define S3C2443_PCLKCON_IIC (1<<4) +#define S3C2443_PCLKCON_SDI (1<<5) +#define S3C2443_PCLKCON_ADC (1<<7) +#define S3C2443_PCLKCON_IIS (1<<9) +#define S3C2443_PCLKCON_PWMT (1<<10) +#define S3C2443_PCLKCON_WDT (1<<11) +#define S3C2443_PCLKCON_RTC (1<<12) +#define S3C2443_PCLKCON_GPIO (1<<13) +#define S3C2443_PCLKCON_SPI0 (1<<14) +#define S3C2443_PCLKCON_SPI1 (1<<15) + +#define S3C2443_SCLKCON_DDRCLK (1<<16) +#define S3C2443_SCLKCON_SSMCCLK (1<<15) +#define S3C2443_SCLKCON_HSSPICLK (1<<14) +#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) +#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) +#define S3C2443_SCLKCON_CAMCLK (1<<11) +#define S3C2443_SCLKCON_DISPCLK (1<<10) +#define S3C2443_SCLKCON_I2SCLK (1<<9) +#define S3C2443_SCLKCON_UARTCLK (1<<8) +#define S3C2443_SCLKCON_USBHOST (1<<1) + +#include <asm/div64.h> + +static inline unsigned int +s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; + + mdiv &= S3C2443_PLLCON_MDIVMASK; + pdiv &= S3C2443_PLLCON_PDIVMASK; + sdiv &= S3C2443_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned int)fvco; +} + +static inline unsigned int +s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; + + mdiv &= S3C2443_PLLCON_MDIVMASK; + pdiv &= S3C2443_PLLCON_PDIVMASK; + sdiv &= S3C2443_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ + diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index 46f5240..8946702 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -35,10 +35,12 @@ #define S3C24XX_VA_UART0 (S3C24XX_VA_UART) #define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 ) #define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C24XX_VA_UART + 0xC000 ) #define S3C2410_PA_UART0 (S3C24XX_PA_UART) #define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) #define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) #define S3C2410_URXH (0x24) #define S3C2410_UTXH (0x20) @@ -73,6 +75,8 @@ #define S3C2440_UCON_UCLK (1<<10) #define S3C2440_UCON_PCLK2 (2<<10) #define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + #define S3C2440_UCON2_FCLK_EN (1<<15) #define S3C2440_UCON0_DIVMASK (15 << 12) #define S3C2440_UCON1_DIVMASK (15 << 12) @@ -93,6 +97,8 @@ #define S3C2410_UCON_TXIRQMODE (1<<2) #define S3C2410_UCON_RXIRQMODE (1<<0) #define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) #define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -127,7 +133,7 @@ #define S3C2410_UMCOM_AFC (1<<4) #define S3C2410_UMCOM_RTS_LOW (1<<0) -#define S3C2412_UMCON_AFC_63 (0<<5) +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ #define S3C2412_UMCON_AFC_56 (1<<5) #define S3C2412_UMCON_AFC_48 (2<<5) #define S3C2412_UMCON_AFC_40 (3<<5) @@ -143,6 +149,7 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) +/* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) #define S3C2440_UFSTAT_TXSHIFT (8) @@ -157,6 +164,8 @@ #define S3C2410_UERSTAT_OVERRUN (1<<0) #define S3C2410_UERSTAT_FRAME (1<<2) #define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + #define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ S3C2410_UERSTAT_FRAME | \ S3C2410_UERSTAT_BREAK) @@ -164,6 +173,8 @@ #define S3C2410_UMSTAT_CTS (1<<0) #define S3C2410_UMSTAT_DeltaCTS (1<<2) +#define S3C2443_DIVSLOT (0x2C) + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h new file mode 100644 index 0000000..4f866cd --- /dev/null +++ b/include/asm-arm/arch-s3c2410/reset.h @@ -0,0 +1,22 @@ +/* linux/include/asm-arm/arch-s3c2410/reset.h + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 CPU reset controls +*/ + +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H __FILE__ + +/* This allows the over-ride of the default reset code +*/ + +extern void (*s3c24xx_reset_hook)(void); + +#endif /* __ASM_ARCH_RESET_H */ diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index ecf250d..1c74ef1 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -15,15 +15,16 @@ #include <asm/arch/map.h> #include <asm/arch/idle.h> +#include <asm/arch/reset.h> #include <asm/arch/regs-watchdog.h> #include <asm/arch/regs-clock.h> void (*s3c24xx_idle)(void); +void (*s3c24xx_reset_hook)(void); void s3c24xx_default_idle(void) { - void __iomem *reg = S3C2410_CLKCON; unsigned long tmp; int i; @@ -33,16 +34,18 @@ void s3c24xx_default_idle(void) /* Warning: going into idle state upsets jtag scanning */ - __raw_writel(__raw_readl(reg) | (1<<2), reg); + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); /* the samsung port seems to do a loop and then unset idle.. */ for (i = 0; i < 50; i++) { - tmp += __raw_readl(reg); /* ensure loop not optimised out */ + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ } /* this bit is not cleared on re-start... */ - __raw_writel(__raw_readl(reg) & ~(1<<2), reg); + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); } static void arch_idle(void) @@ -53,7 +56,6 @@ static void arch_idle(void) s3c24xx_default_idle(); } - static void arch_reset(char mode) { @@ -61,6 +63,9 @@ arch_reset(char mode) cpu_reset(0); } + if (s3c24xx_reset_hook) + s3c24xx_reset_hook(); + printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h new file mode 100644 index 0000000..e59ec33 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/udc.h @@ -0,0 +1,36 @@ +/* linux/include/asm/arch-s3c2410/udc.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 14-Mar-2005 RTP Created file + * 02-Aug-2005 RTP File rename + * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum + * 18-Jan-2007 HMW Add per-platform vbus_draw function +*/ + +#ifndef __ASM_ARM_ARCH_UDC_H +#define __ASM_ARM_ARCH_UDC_H + +enum s3c2410_udc_cmd_e { + S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ + S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ + S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ +}; + +struct s3c2410_udc_mach_info { + void (*udc_command)(enum s3c2410_udc_cmd_e); + void (*vbus_draw)(unsigned int ma); + unsigned int vbus_pin; + unsigned char vbus_pin_inverted; +}; + +extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); + +#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 5f531ea..afad32c 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -185,9 +185,15 @@ struct cpu_cache_fns { void (*coherent_user_range)(unsigned long, unsigned long); void (*flush_kern_dcache_page)(void *); - void (*dma_inv_range)(unsigned long, unsigned long); - void (*dma_clean_range)(unsigned long, unsigned long); - void (*dma_flush_range)(unsigned long, unsigned long); + void (*dma_inv_range)(const void *, const void *); + void (*dma_clean_range)(const void *, const void *); + void (*dma_flush_range)(const void *, const void *); +}; + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); }; /* @@ -240,9 +246,40 @@ extern void __cpuc_flush_dcache_page(void *); #define dmac_clean_range __glue(_CACHE,_dma_clean_range) #define dmac_flush_range __glue(_CACHE,_dma_flush_range) -extern void dmac_inv_range(unsigned long, unsigned long); -extern void dmac_clean_range(unsigned long, unsigned long); -extern void dmac_flush_range(unsigned long, unsigned long); +extern void dmac_inv_range(const void *, const void *); +extern void dmac_clean_range(const void *, const void *); +extern void dmac_flush_range(const void *, const void *); + +#endif + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } #endif diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h index 8c0bb5b..eaa0efd 100644 --- a/include/asm-arm/checksum.h +++ b/include/asm-arm/checksum.h @@ -40,13 +40,27 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); /* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__( + "add %0, %1, %1, ror #16 @ csum_fold" + : "=r" (sum) + : "r" (sum) + : "cc"); + return (__force __sum16)(~(__force u32)sum >> 16); +} + +/* * This is a version of ip_compute_csum() optimized for IP headers, * which always checksum on 4 octet boundaries. */ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { - unsigned int sum, tmp1; + unsigned int tmp1; + __wsum sum; __asm__ __volatile__( "ldr %0, [%1], #4 @ ip_fast_csum \n\ @@ -62,29 +76,11 @@ ip_fast_csum(const void *iph, unsigned int ihl) subne %2, %2, #1 @ without destroying \n\ bne 1b @ the carry flag \n\ adcs %0, %0, %3 \n\ - adc %0, %0, #0 \n\ - adds %0, %0, %0, lsl #16 \n\ - addcs %0, %0, #0x10000 \n\ - mvn %0, %0 \n\ - mov %0, %0, lsr #16" + adc %0, %0, #0" : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) : "1" (iph), "2" (ihl) : "cc", "memory"); - return (__force __sum16)sum; -} - -/* - * Fold a partial checksum without adding pseudo headers - */ -static inline __sum16 csum_fold(__wsum sum) -{ - __asm__( - "adds %0, %1, %1, lsl #16 @ csum_fold \n\ - addcs %0, %0, #0x10000" - : "=r" (sum) - : "r" (sum) - : "cc"); - return (__force __sum16)(~(__force u32)sum >> 16); + return csum_fold(sum); } static inline __wsum @@ -114,23 +110,7 @@ static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { - __asm__( - "adds %0, %1, %2 @ csum_tcpudp_magic \n\ - adcs %0, %0, %3 \n" -#ifdef __ARMEB__ - "adcs %0, %0, %4 \n" -#else - "adcs %0, %0, %4, lsl #8 \n" -#endif - "adcs %0, %0, %5 \n\ - adc %0, %0, #0 \n\ - adds %0, %0, %0, lsl #16 \n\ - addcs %0, %0, #0x10000 \n\ - mvn %0, %0" - : "=&r"(sum) - : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) - : "cc"); - return (__force __sum16)((__force u32)sum >> 16); + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } diff --git a/include/asm-arm/device.h b/include/asm-arm/device.h index d8f9872..c61642b 100644 --- a/include/asm-arm/device.h +++ b/include/asm-arm/device.h @@ -3,5 +3,13 @@ * * This file is released under the GPLv2 */ -#include <asm-generic/device.h> +#ifndef ASMARM_DEVICE_H +#define ASMARM_DEVICE_H +struct dev_archdata { +#ifdef CONFIG_DMABOUNCE + struct dmabounce_device_info *dmabounce; +#endif +}; + +#endif diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index 9bc46b4..abfb75b 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -17,7 +17,7 @@ * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ -extern void consistent_sync(void *kaddr, size_t size, int rw); +extern void consistent_sync(const void *kaddr, size_t size, int rw); /* * Return whether the given device DMA address mask can be supported @@ -61,6 +61,22 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) return dma_addr == ~0; } +/* + * Dummy noncoherent implementation. We don't provide a dma_cache_sync + * function so drivers using this API are highlighted with build warnings. + */ +static inline void * +dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) +{ + return NULL; +} + +static inline void +dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle) +{ +} + /** * dma_alloc_coherent - allocate consistent memory for DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h index 4c2885a..3c12a76 100644 --- a/include/asm-arm/domain.h +++ b/include/asm-arm/domain.h @@ -57,6 +57,7 @@ __asm__ __volatile__( \ "mcr p15, 0, %0, c3, c0 @ set domain" \ : : "r" (x)); \ + isb(); \ } while (0) #define modify_domain(dom,type) \ diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h index 9903f60..7d28eb5 100644 --- a/include/asm-arm/hardware/arm_scu.h +++ b/include/asm-arm/hardware/arm_scu.h @@ -1,6 +1,8 @@ #ifndef ASMARM_HARDWARE_ARM_SCU_H #define ASMARM_HARDWARE_ARM_SCU_H +#include <asm/arch/scu.h> + /* * SCU registers */ diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h new file mode 100644 index 0000000..54029a7 --- /dev/null +++ b/include/asm-arm/hardware/cache-l2x0.h @@ -0,0 +1,56 @@ +/* + * include/asm-arm/hardware/cache-l2x0.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_HARDWARE_L2X0_H +#define __ASM_ARM_HARDWARE_L2X0_H + +#define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_TYPE 0x004 +#define L2X0_CTRL 0x100 +#define L2X0_AUX_CTRL 0x104 +#define L2X0_EVENT_CNT_CTRL 0x200 +#define L2X0_EVENT_CNT1_CFG 0x204 +#define L2X0_EVENT_CNT0_CFG 0x208 +#define L2X0_EVENT_CNT1_VAL 0x20C +#define L2X0_EVENT_CNT0_VAL 0x210 +#define L2X0_INTR_MASK 0x214 +#define L2X0_MASKED_INTR_STAT 0x218 +#define L2X0_RAW_INTR_STAT 0x21C +#define L2X0_INTR_CLEAR 0x220 +#define L2X0_CACHE_SYNC 0x730 +#define L2X0_INV_LINE_PA 0x770 +#define L2X0_INV_WAY 0x77C +#define L2X0_CLEAN_LINE_PA 0x7B0 +#define L2X0_CLEAN_LINE_IDX 0x7B8 +#define L2X0_CLEAN_WAY 0x7BC +#define L2X0_CLEAN_INV_LINE_PA 0x7F0 +#define L2X0_CLEAN_INV_LINE_IDX 0x7F8 +#define L2X0_CLEAN_INV_WAY 0x7FC +#define L2X0_LOCKDOWN_WAY_D 0x900 +#define L2X0_LOCKDOWN_WAY_I 0x904 +#define L2X0_TEST_OPERATION 0xF00 +#define L2X0_LINE_DATA 0xF10 +#define L2X0_LINE_TAG 0xF30 +#define L2X0_DEBUG_CTRL 0xF40 + +#ifndef __ASSEMBLY__ +extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +#endif + +#endif diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h index 3fa5eb7..966e428 100644 --- a/include/asm-arm/hardware/gic.h +++ b/include/asm-arm/hardware/gic.h @@ -33,8 +33,9 @@ #define GIC_DIST_SOFTINT 0xf00 #ifndef __ASSEMBLY__ -void gic_dist_init(void __iomem *base); -void gic_cpu_init(void __iomem *base); +void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); +void gic_cpu_init(unsigned int gic_nr, void __iomem *base); +void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); #endif diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index 13ac8a4..c91b546 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -37,6 +37,13 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 #define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 #define IOP3XX_PERIPHERAL_SIZE 0x00002000 +#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ + (IOP3XX_PERIPHERAL_PHYS_BASE\ + - IOP3XX_PERIPHERAL_VIRT_BASE)) #define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) /* Address Translation Unit */ @@ -258,12 +265,20 @@ extern void gpio_line_set(int line, int value); #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 #define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 #define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR) +#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) addr -\ + IOP3XX_PCI_LOWER_IO_PA) +\ + IOP3XX_PCI_LOWER_IO_VA) #ifndef __ASSEMBLY__ void iop3xx_map_io(void); void iop3xx_init_time(unsigned long); unsigned long iop3xx_gettimeoffset(void); +void iop_init_cp6_handler(void); extern struct platform_device iop3xx_i2c0_device; extern struct platform_device iop3xx_i2c1_device; diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h index 6aa0a5b..61b1d05 100644 --- a/include/asm-arm/hardware/sa1111.h +++ b/include/asm-arm/hardware/sa1111.h @@ -29,6 +29,9 @@ #define _SA1111(x) ((x) + sa1111->resource.start) #endif +#define sa1111_writel(val,addr) __raw_writel(val, addr) +#define sa1111_readl(addr) __raw_readl(addr) + /* * 26 bits of the SA-1110 address bus are available to the SA-1111. * Use these when feeding target addresses to the DMA engines. @@ -45,14 +48,6 @@ #define SA1111_SAC_DMA_MIN_XFER (0x800) /* - * SA1111 register definitions. - */ -#define __CCREG(x) __REGP(SA1111_VBASE + (x)) - -#define sa1111_writel(val,addr) __raw_writel(val, addr) -#define sa1111_readl(addr) __raw_readl(addr) - -/* * System Bus Interface (SBI) * * Registers @@ -194,55 +189,37 @@ * SADR Serial Audio Data Register (16 x 32-bit) */ -#define _SACR0 _SA1111( 0x0600 ) -#define _SACR1 _SA1111( 0x0604 ) -#define _SACR2 _SA1111( 0x0608 ) -#define _SASR0 _SA1111( 0x060c ) -#define _SASR1 _SA1111( 0x0610 ) -#define _SASCR _SA1111( 0x0618 ) -#define _L3_CAR _SA1111( 0x061c ) -#define _L3_CDR _SA1111( 0x0620 ) -#define _ACCAR _SA1111( 0x0624 ) -#define _ACCDR _SA1111( 0x0628 ) -#define _ACSAR _SA1111( 0x062c ) -#define _ACSDR _SA1111( 0x0630 ) -#define _SADTCS _SA1111( 0x0634 ) -#define _SADTSA _SA1111( 0x0638 ) -#define _SADTCA _SA1111( 0x063c ) -#define _SADTSB _SA1111( 0x0640 ) -#define _SADTCB _SA1111( 0x0644 ) -#define _SADRCS _SA1111( 0x0648 ) -#define _SADRSA _SA1111( 0x064c ) -#define _SADRCA _SA1111( 0x0650 ) -#define _SADRSB _SA1111( 0x0654 ) -#define _SADRCB _SA1111( 0x0658 ) -#define _SAITR _SA1111( 0x065c ) -#define _SADR _SA1111( 0x0680 ) - -#define SACR0 __CCREG(0x0600) -#define SACR1 __CCREG(0x0604) -#define SACR2 __CCREG(0x0608) -#define SASR0 __CCREG(0x060c) -#define SASR1 __CCREG(0x0610) -#define SASCR __CCREG(0x0618) -#define L3_CAR __CCREG(0x061c) -#define L3_CDR __CCREG(0x0620) -#define ACCAR __CCREG(0x0624) -#define ACCDR __CCREG(0x0628) -#define ACSAR __CCREG(0x062c) -#define ACSDR __CCREG(0x0630) -#define SADTCS __CCREG(0x0634) -#define SADTSA __CCREG(0x0638) -#define SADTCA __CCREG(0x063c) -#define SADTSB __CCREG(0x0640) -#define SADTCB __CCREG(0x0644) -#define SADRCS __CCREG(0x0648) -#define SADRSA __CCREG(0x064c) -#define SADRCA __CCREG(0x0650) -#define SADRSB __CCREG(0x0654) -#define SADRCB __CCREG(0x0658) -#define SAITR __CCREG(0x065c) -#define SADR __CCREG(0x0680) +#define SA1111_SERAUDIO 0x0600 + +/* + * These are offsets from the above base. + */ +#define SA1111_SACR0 0x00 +#define SA1111_SACR1 0x04 +#define SA1111_SACR2 0x08 +#define SA1111_SASR0 0x0c +#define SA1111_SASR1 0x10 +#define SA1111_SASCR 0x18 +#define SA1111_L3_CAR 0x1c +#define SA1111_L3_CDR 0x20 +#define SA1111_ACCAR 0x24 +#define SA1111_ACCDR 0x28 +#define SA1111_ACSAR 0x2c +#define SA1111_ACSDR 0x30 +#define SA1111_SADTCS 0x34 +#define SA1111_SADTSA 0x38 +#define SA1111_SADTCA 0x3c +#define SA1111_SADTSB 0x40 +#define SA1111_SADTCB 0x44 +#define SA1111_SADRCS 0x48 +#define SA1111_SADRSA 0x4c +#define SA1111_SADRCA 0x50 +#define SA1111_SADRSB 0x54 +#define SA1111_SADRCB 0x58 +#define SA1111_SAITR 0x5c +#define SA1111_SADR 0x80 + +#ifndef CONFIG_ARCH_PXA #define SACR0_ENB (1<<0) #define SACR0_BCKD (1<<2) @@ -330,6 +307,8 @@ #define SAITR_RDBDA (1<<10) #define SAITR_RDBDB (1<<11) +#endif /* !CONFIG_ARCH_PXA */ + /* * General-Purpose I/O Interface * diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h new file mode 100644 index 0000000..8c1c616 --- /dev/null +++ b/include/asm-arm/kexec.h @@ -0,0 +1,30 @@ +#ifndef _ARM_KEXEC_H +#define _ARM_KEXEC_H + +#ifdef CONFIG_KEXEC + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +#define KEXEC_ARCH KEXEC_ARCH_ARM + +#ifndef __ASSEMBLY__ + +#define MAX_NOTE_BYTES 1024 + +struct kimage; +/* Provide a dummy definition to avoid build failures. */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } + +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_KEXEC */ + +#endif /* _ARM_KEXEC_H */ diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index b8cf2d5..7b2bafc 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -175,19 +175,29 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #ifndef __ASSEMBLY__ /* - * The following macros handle the cache and bufferable bits... + * The pgprot_* and protection_map entries will be fixed up in runtime + * to include the cachable and bufferable bits based on memory policy, + * as well as any architecture dependent bits like global/ASID and SMP + * shared mapping bits. */ #define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE #define _L_PTE_READ L_PTE_USER | L_PTE_EXEC +extern pgprot_t pgprot_user; extern pgprot_t pgprot_kernel; -#define PAGE_NONE __pgprot(_L_PTE_DEFAULT) -#define PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) -#define PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) -#define PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) +#define PAGE_NONE pgprot_user +#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) +#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \ + L_PTE_WRITE) +#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) #define PAGE_KERNEL pgprot_kernel +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT) +#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) +#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) +#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) + #endif /* __ASSEMBLY__ */ /* @@ -198,23 +208,23 @@ extern pgprot_t pgprot_kernel; * 2) If we could do execute protection, then read is implied * 3) write implies read permissions */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED +#define __P000 __PAGE_NONE +#define __P001 __PAGE_READONLY +#define __P010 __PAGE_COPY +#define __P011 __PAGE_COPY +#define __P100 __PAGE_READONLY +#define __P101 __PAGE_READONLY +#define __P110 __PAGE_COPY +#define __P111 __PAGE_COPY + +#define __S000 __PAGE_NONE +#define __S001 __PAGE_READONLY +#define __S010 __PAGE_SHARED +#define __S011 __PAGE_SHARED +#define __S100 __PAGE_READONLY +#define __S101 __PAGE_READONLY +#define __S110 __PAGE_SHARED +#define __S111 __PAGE_SHARED #ifndef __ASSEMBLY__ /* diff --git a/arch/arm/mach-s3c2410/clock.h b/include/asm-arm/plat-s3c24xx/clock.h index 7f0ea03..f6135db 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/include/asm-arm/plat-s3c24xx/clock.h @@ -1,4 +1,4 @@ -/* +/* linux/include/asm-arm/plat-s3c24xx/clock.h * linux/arch/arm/mach-s3c2410/clock.h * * Copyright (c) 2004-2005 Simtec Electronics diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h index 0e3a3be..58d9094 100644 --- a/arch/arm/mach-s3c2410/common-smdk.h +++ b/include/asm-arm/plat-s3c24xx/common-smdk.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/common-smdk.h +/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h index be42e40..15dd188 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/include/asm-arm/plat-s3c24xx/cpu.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/cpu.h +/* linux/include/asm-arm/plat-s3c24xx/cpu.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -67,3 +67,4 @@ extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2412_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/mach-s3c2410/devs.h b/include/asm-arm/plat-s3c24xx/devs.h index 14fb0ba..dddf485 100644 --- a/arch/arm/mach-s3c2410/devs.h +++ b/include/asm-arm/plat-s3c24xx/devs.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/devs.h +/* linux/include/asm-arm/plat-s3c24xx/devs.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/dma.h b/include/asm-arm/plat-s3c24xx/dma.h index 0ebfe0a..2c59406 100644 --- a/arch/arm/mach-s3c2410/dma.h +++ b/include/asm-arm/plat-s3c24xx/dma.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/dma.h +/* linux/include/asm-arm/plat-s3c24xx/dma.h * * Copyright (C) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -14,6 +14,7 @@ extern struct sysdev_class dma_sysclass; extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) +#define DMA_CH_NEVER (1<<30) struct s3c24xx_dma_addr { unsigned long from; @@ -43,3 +44,34 @@ struct s3c24xx_dma_selection { }; extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); + +/* struct s3c24xx_dma_order_ch + * + * channel map for one of the `enum dma_ch` dma channels. the list + * entry contains a set of low-level channel numbers, orred with + * DMA_CH_VALID, which are checked in the order in the array. +*/ + +struct s3c24xx_dma_order_ch { + unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ + unsigned int flags; /* flags */ +}; + +/* struct s3c24xx_dma_order + * + * information provided by either the core or the board to give the + * dma system a hint on how to allocate channels +*/ + +struct s3c24xx_dma_order { + struct s3c24xx_dma_order_ch channels[DMACH_MAX]; +}; + +extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); + +/* DMA init code, called from the cpu support code */ + +extern int s3c2410_dma_init(void); + +extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride); diff --git a/arch/arm/mach-s3c2410/irq.h b/include/asm-arm/plat-s3c24xx/irq.h index e5913da..8af6d95 100644 --- a/arch/arm/mach-s3c2410/irq.h +++ b/include/asm-arm/plat-s3c24xx/irq.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/irq.h +/* linux/include/asm-arm/plat-s3c24xx/irq.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/pm.h b/include/asm-arm/plat-s3c24xx/pm.h index ffe197a..cc62366 100644 --- a/arch/arm/mach-s3c2410/pm.h +++ b/include/asm-arm/plat-s3c24xx/pm.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/pm.h +/* linux/include/asm-arm/plat-s3c24xx/pm.h * * Copyright (c) 2004 Simtec Electronics * Written by Ben Dooks, <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h index 8b2394e..3a5a168 100644 --- a/arch/arm/mach-s3c2410/s3c2400.h +++ b/include/asm-arm/plat-s3c24xx/s3c2400.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c2400.h +/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h index fbed084..36de0b8 100644 --- a/arch/arm/mach-s3c2410/s3c2410.h +++ b/include/asm-arm/plat-s3c24xx/s3c2410.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c2410.h +/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h index c6e5603..3ec9768 100644 --- a/arch/arm/mach-s3c2410/s3c2412.h +++ b/include/asm-arm/plat-s3c24xx/s3c2412.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c2412.h +/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h index dcd3160..107853b 100644 --- a/arch/arm/mach-s3c2410/s3c2440.h +++ b/include/asm-arm/plat-s3c24xx/s3c2440.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c2440.h +/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h index 0ae37d2..451a23a 100644 --- a/arch/arm/mach-s3c2410/s3c2442.h +++ b/include/asm-arm/plat-s3c24xx/s3c2442.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/s3c2442.h +/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h new file mode 100644 index 0000000..11d83b5 --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/s3c2443.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2443 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2443 + +struct s3c2410_uartcfg; + +extern int s3c2443_init(void); + +extern void s3c2443_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2443_init_clocks(int xtal); + +extern int s3c2443_baseclk_add(void); + +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index aa223fc..f438690 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -140,6 +140,40 @@ static inline int cpu_is_xsc3(void) #define cpu_is_xscale() 1 #endif +#define UDBG_UNDEFINED (1 << 0) +#define UDBG_SYSCALL (1 << 1) +#define UDBG_BADABORT (1 << 2) +#define UDBG_SEGV (1 << 3) +#define UDBG_BUS (1 << 4) + +extern unsigned int user_debug; + +#if __LINUX_ARM_ARCH__ >= 4 +#define vectors_high() (cr_alignment & CR_V) +#else +#define vectors_high() (0) +#endif + +#if __LINUX_ARM_ARCH__ >= 6 +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ + : : "r" (0) : "memory") +#else +#define isb() __asm__ __volatile__ ("" : : : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#endif +#define mb() dmb() +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ @@ -154,6 +188,7 @@ static inline void set_cr(unsigned int val) { asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" : : "r" (val) : "cc"); + isb(); } #ifndef CONFIG_SMP @@ -176,34 +211,9 @@ static inline void set_copro_access(unsigned int val) { asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" : : "r" (val) : "cc"); + isb(); } -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - -extern unsigned int user_debug; - -#if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) -#else -#define vectors_high() (0) -#endif - -#if __LINUX_ARM_ARCH__ >= 6 -#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ - : : "r" (0) : "memory") -#else -#define mb() __asm__ __volatile__ ("" : : : "memory") -#endif -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); - /* * switch_mm() may do a full cache flush over the context switch, * so enable interrupts over the context switch to avoid high diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index cd10a0b..08c6991 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -247,7 +247,7 @@ static inline void local_flush_tlb_all(void) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_WB)) - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); + dsb(); if (tlb_flag(TLB_V3_FULL)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); @@ -257,6 +257,15 @@ static inline void local_flush_tlb_all(void) asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } static inline void local_flush_tlb_mm(struct mm_struct *mm) @@ -266,7 +275,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_WB)) - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); + dsb(); if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { if (tlb_flag(TLB_V3_FULL)) @@ -285,6 +294,14 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_V6_I_ASID)) asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } } static inline void @@ -296,7 +313,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); if (tlb_flag(TLB_WB)) - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero)); + dsb(); if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { if (tlb_flag(TLB_V3_PAGE)) @@ -317,6 +334,14 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } } static inline void local_flush_tlb_kernel_page(unsigned long kaddr) @@ -327,7 +352,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) kaddr &= PAGE_MASK; if (tlb_flag(TLB_WB)) - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); + dsb(); if (tlb_flag(TLB_V3_PAGE)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); @@ -347,11 +372,14 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - /* The ARM ARM states that the completion of a TLB maintenance - * operation is only guaranteed by a DSB instruction - */ - if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } /* @@ -369,15 +397,13 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) */ static inline void flush_pmd_entry(pmd_t *pmd) { - const unsigned int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_DCLEAN)) asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" : : "r" (pmd) : "cc"); if (tlb_flag(TLB_WB)) - asm("mcr p15, 0, %0, c7, c10, 4 @ flush_pmd" - : : "r" (zero) : "cc"); + dsb(); } static inline void clean_pmd_entry(pmd_t *pmd) diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 97e7060..0991b7b 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -372,6 +372,7 @@ #define __NR_move_pages (__NR_SYSCALL_BASE+344) #define __NR_getcpu (__NR_SYSCALL_BASE+345) /* 346 for epoll_pwait */ +#define __NR_sys_kexec_load (__NR_SYSCALL_BASE+347) /* * The following SWIs are ARM private. diff --git a/include/asm-avr32/arch-at32ap/at91_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h deleted file mode 100644 index 79d6e02..0000000 --- a/include/asm-avr32/arch-at32ap/at91_pdc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91_pdc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Peripheral Data Controller (PDC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PDC_H -#define AT91_PDC_H - -#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */ -#define AT91_PDC_RCR 0x104 /* Receive Counter Register */ -#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */ -#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */ -#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */ -#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */ -#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */ -#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */ - -#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */ -#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */ -#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */ -#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */ -#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */ - -#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */ - -#endif diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h new file mode 100644 index 0000000..5058a31 --- /dev/null +++ b/include/linux/atmel_pdc.h @@ -0,0 +1,36 @@ +/* + * include/linux/atmel_pdc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Peripheral Data Controller (PDC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ATMEL_PDC_H +#define ATMEL_PDC_H + +#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */ +#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */ +#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */ +#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */ +#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */ +#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */ +#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */ +#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */ + +#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */ +#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */ +#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */ +#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */ +#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */ + +#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */ + +#endif diff --git a/include/linux/kexec.h b/include/linux/kexec.h index d02425c..696e5ec 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -125,6 +125,7 @@ extern struct kimage *kexec_crash_image; #define KEXEC_ARCH_PPC (20 << 16) #define KEXEC_ARCH_PPC64 (21 << 16) #define KEXEC_ARCH_IA_64 (50 << 16) +#define KEXEC_ARCH_ARM (40 << 16) #define KEXEC_ARCH_S390 (22 << 16) #define KEXEC_ARCH_SH (42 << 16) #define KEXEC_ARCH_MIPS_LE (10 << 16) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 53675cf..5190d7a 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -65,10 +65,12 @@ static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97) * SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR * register. */ -static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) +static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) { struct aaci *aaci = ac97->private_data; u32 v; + int timeout = 5000; if (ac97->num >= 4) return; @@ -89,7 +91,11 @@ static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned */ do { v = readl(aaci->base + AACI_SLFR); - } while (v & (SLFR_1TXB|SLFR_2TXB)); + } while ((v & (SLFR_1TXB|SLFR_2TXB)) && timeout--); + + if (!timeout) + dev_err(&aaci->dev->dev, + "timeout waiting for write to complete\n"); mutex_unlock(&aaci->ac97_sem); } @@ -101,6 +107,8 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) { struct aaci *aaci = ac97->private_data; u32 v; + int timeout = 5000; + int retries = 10; if (ac97->num >= 4) return ~0; @@ -119,7 +127,13 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) */ do { v = readl(aaci->base + AACI_SLFR); - } while (v & SLFR_1TXB); + } while ((v & SLFR_1TXB) && timeout--); + + if (!timeout) { + dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n"); + v = ~0; + goto out; + } /* * Give the AC'97 codec more than enough time @@ -130,21 +144,35 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) /* * Wait for slot 2 to indicate data. */ + timeout = 5000; do { cond_resched(); v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV); - } while (v != (SLFR_1RXV|SLFR_2RXV)); + } while ((v != (SLFR_1RXV|SLFR_2RXV)) && timeout--); - v = readl(aaci->base + AACI_SL1RX) >> 12; - if (v == reg) { - v = readl(aaci->base + AACI_SL2RX) >> 4; - } else { - dev_err(&aaci->dev->dev, - "wrong ac97 register read back (%x != %x)\n", - v, reg); + if (!timeout) { + dev_err(&aaci->dev->dev, "timeout on RX valid\n"); v = ~0; + goto out; } + do { + v = readl(aaci->base + AACI_SL1RX) >> 12; + if (v == reg) { + v = readl(aaci->base + AACI_SL2RX) >> 4; + break; + } else if (--retries) { + dev_warn(&aaci->dev->dev, + "ac97 read back fail. retry\n"); + continue; + } else { + dev_warn(&aaci->dev->dev, + "wrong ac97 register read back (%x != %x)\n", + v, reg); + v = ~0; + } + } while (retries); + out: mutex_unlock(&aaci->ac97_sem); return v; } @@ -164,10 +192,70 @@ static inline void aaci_chan_wait_ready(struct aaci_runtime *aacirun) /* * Interrupt support. */ -static void aaci_fifo_irq(struct aaci *aaci, u32 mask) +static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) { + if (mask & ISR_ORINTR) { + dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel); + writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR); + } + + if (mask & ISR_RXTOINTR) { + dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel); + writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR); + } + + if (mask & ISR_RXINTR) { + struct aaci_runtime *aacirun = &aaci->capture; + void *ptr; + + if (!aacirun->substream || !aacirun->start) { + dev_warn(&aaci->dev->dev, "RX interrupt???"); + writel(0, aacirun->base + AACI_IE); + return; + } + ptr = aacirun->ptr; + + do { + unsigned int len = aacirun->fifosz; + u32 val; + + if (aacirun->bytes <= 0) { + aacirun->bytes += aacirun->period; + aacirun->ptr = ptr; + spin_unlock(&aaci->lock); + snd_pcm_period_elapsed(aacirun->substream); + spin_lock(&aaci->lock); + } + if (!(aacirun->cr & CR_EN)) + break; + + val = readl(aacirun->base + AACI_SR); + if (!(val & SR_RXHF)) + break; + if (!(val & SR_RXFF)) + len >>= 1; + + aacirun->bytes -= len; + + /* reading 16 bytes at a time */ + for( ; len > 0; len -= 16) { + asm( + "ldmia %1, {r0, r1, r2, r3}\n\t" + "stmia %0!, {r0, r1, r2, r3}" + : "+r" (ptr) + : "r" (aacirun->fifo) + : "r0", "r1", "r2", "r3", "cc"); + + if (ptr >= aacirun->end) + ptr = aacirun->start; + } + } while(1); + aacirun->ptr = ptr; + } + if (mask & ISR_URINTR) { - writel(ICLR_TXUEC1, aaci->base + AACI_INTCLR); + dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel); + writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR); } if (mask & ISR_TXINTR) { @@ -192,7 +280,7 @@ static void aaci_fifo_irq(struct aaci *aaci, u32 mask) snd_pcm_period_elapsed(aacirun->substream); spin_lock(&aaci->lock); } - if (!(aacirun->cr & TXCR_TXEN)) + if (!(aacirun->cr & CR_EN)) break; val = readl(aacirun->base + AACI_SR); @@ -233,7 +321,7 @@ static irqreturn_t aaci_irq(int irq, void *devid) u32 m = mask; for (i = 0; i < 4; i++, m >>= 7) { if (m & 0x7f) { - aaci_fifo_irq(aaci, m); + aaci_fifo_irq(aaci, i, m); } } } @@ -330,8 +418,9 @@ static struct snd_pcm_hardware aaci_hw_info = { .periods_max = PAGE_SIZE / 16, }; -static int aaci_pcm_open(struct aaci *aaci, struct snd_pcm_substream *substream, - struct aaci_runtime *aacirun) +static int __aaci_pcm_open(struct aaci *aaci, + struct snd_pcm_substream *substream, + struct aaci_runtime *aacirun) { struct snd_pcm_runtime *runtime = substream->runtime; int ret; @@ -380,7 +469,7 @@ static int aaci_pcm_close(struct snd_pcm_substream *substream) struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; - WARN_ON(aacirun->cr & TXCR_TXEN); + WARN_ON(aacirun->cr & CR_EN); aacirun->substream = NULL; free_irq(aaci->dev->irq[0], aaci); @@ -395,7 +484,7 @@ static int aaci_pcm_hw_free(struct snd_pcm_substream *substream) /* * This must not be called with the device enabled. */ - WARN_ON(aacirun->cr & TXCR_TXEN); + WARN_ON(aacirun->cr & CR_EN); if (aacirun->pcm_open) snd_ac97_pcm_close(aacirun->pcm); @@ -422,9 +511,15 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, if (err < 0) goto out; - err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), - params_channels(params), - aacirun->pcm->r[0].slots); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + params_channels(params), + aacirun->pcm->r[0].slots); + else + err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + params_channels(params), + aacirun->pcm->r[1].slots); + if (err) goto out; @@ -467,9 +562,9 @@ static int aaci_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_str * Playback specific ALSA stuff */ static const u32 channels_to_txmask[] = { - [2] = TXCR_TX3 | TXCR_TX4, - [4] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8, - [6] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8 | TXCR_TX6 | TXCR_TX9, + [2] = CR_SL3 | CR_SL4, + [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8, + [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9, }; /* @@ -504,7 +599,7 @@ aaci_rule_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) chan_mask); } -static int aaci_pcm_playback_open(struct snd_pcm_substream *substream) +static int aaci_pcm_open(struct snd_pcm_substream *substream) { struct aaci *aaci = substream->private_data; int ret; @@ -519,7 +614,12 @@ static int aaci_pcm_playback_open(struct snd_pcm_substream *substream) if (ret) return ret; - return aaci_pcm_open(aaci, substream, &aaci->playback); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = __aaci_pcm_open(aaci, substream, &aaci->playback); + } else { + ret = __aaci_pcm_open(aaci, substream, &aaci->capture); + } + return ret; } static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, @@ -540,11 +640,11 @@ static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, * FIXME: double rate slots? */ if (ret >= 0) { - aacirun->cr = TXCR_FEN | TXCR_COMPACT | TXCR_TSZ16; + aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; aacirun->cr |= channels_to_txmask[channels]; aacirun->fifosz = aaci->fifosize * 4; - if (aacirun->cr & TXCR_COMPACT) + if (aacirun->cr & CR_COMPACT) aacirun->fifosz >>= 1; } return ret; @@ -557,7 +657,7 @@ static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) ie = readl(aacirun->base + AACI_IE); ie &= ~(IE_URIE|IE_TXIE); writel(ie, aacirun->base + AACI_IE); - aacirun->cr &= ~TXCR_TXEN; + aacirun->cr &= ~CR_EN; aaci_chan_wait_ready(aacirun); writel(aacirun->cr, aacirun->base + AACI_TXCR); } @@ -567,7 +667,7 @@ static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) u32 ie; aaci_chan_wait_ready(aacirun); - aacirun->cr |= TXCR_TXEN; + aacirun->cr |= CR_EN; ie = readl(aacirun->base + AACI_IE); ie |= IE_URIE | IE_TXIE; @@ -615,7 +715,7 @@ static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cm } static struct snd_pcm_ops aaci_playback_ops = { - .open = aaci_pcm_playback_open, + .open = aaci_pcm_open, .close = aaci_pcm_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = aaci_pcm_playback_hw_params, @@ -626,7 +726,133 @@ static struct snd_pcm_ops aaci_playback_ops = { .mmap = aaci_pcm_mmap, }; +static int aaci_pcm_capture_hw_params(snd_pcm_substream_t *substream, + snd_pcm_hw_params_t *params) +{ + struct aaci *aaci = substream->private_data; + struct aaci_runtime *aacirun = substream->runtime->private_data; + int ret; + + ret = aaci_pcm_hw_params(substream, aacirun, params); + + if (ret >= 0) { + aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; + + /* Line in record: slot 3 and 4 */ + aacirun->cr |= CR_SL3 | CR_SL4; + + aacirun->fifosz = aaci->fifosize * 4; + + if (aacirun->cr & CR_COMPACT) + aacirun->fifosz >>= 1; + } + return ret; +} + +static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) +{ + u32 ie; + + aaci_chan_wait_ready(aacirun); + + ie = readl(aacirun->base + AACI_IE); + ie &= ~(IE_ORIE | IE_RXIE); + writel(ie, aacirun->base+AACI_IE); + + aacirun->cr &= ~CR_EN; + + writel(aacirun->cr, aacirun->base + AACI_RXCR); +} + +static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) +{ + u32 ie; + + aaci_chan_wait_ready(aacirun); + +#ifdef DEBUG + /* RX Timeout value: bits 28:17 in RXCR */ + aacirun->cr |= 0xf << 17; +#endif + + aacirun->cr |= CR_EN; + writel(aacirun->cr, aacirun->base + AACI_RXCR); + + ie = readl(aacirun->base + AACI_IE); + ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full + writel(ie, aacirun->base + AACI_IE); +} + +static int aaci_pcm_capture_trigger(snd_pcm_substream_t *substream, int cmd){ + + struct aaci *aaci = substream->private_data; + struct aaci_runtime *aacirun = substream->runtime->private_data; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&aaci->lock, flags); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + aaci_pcm_capture_start(aacirun); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + aaci_pcm_capture_start(aacirun); + break; + + case SNDRV_PCM_TRIGGER_STOP: + aaci_pcm_capture_stop(aacirun); + break; + + case SNDRV_PCM_TRIGGER_SUSPEND: + aaci_pcm_capture_stop(aacirun); + break; + + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + break; + + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + break; + + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&aaci->lock, flags); + + return ret; +} +static int aaci_pcm_capture_prepare(snd_pcm_substream_t *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct aaci *aaci = substream->private_data; + + aaci_pcm_prepare(substream); + + /* allow changing of sample rate */ + aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */ + aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); + aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate); + + /* Record select: Mic: 0, Aux: 3, Line: 4 */ + aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404); + + return 0; +} + +static snd_pcm_ops_t aaci_capture_ops = { + .open = aaci_pcm_open, + .close = aaci_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = aaci_pcm_capture_hw_params, + .hw_free = aaci_pcm_hw_free, + .prepare = aaci_pcm_capture_prepare, + .trigger = aaci_pcm_capture_trigger, + .pointer = aaci_pcm_pointer, + .mmap = aaci_pcm_mmap, +}; /* * Power Management. @@ -666,7 +892,7 @@ static int aaci_resume(struct amba_device *dev) static struct ac97_pcm ac97_defs[] __devinitdata = { - [0] = { /* Front PCM */ + [0] = { /* Front PCM */ .exclusive = 1, .r = { [0] = { @@ -740,6 +966,7 @@ static int __devinit aaci_probe_ac97(struct aaci *aaci) ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97); if (ret) goto out; + aaci->ac97 = ac97; /* * Disable AC97 PC Beep input on audio codecs. @@ -752,6 +979,7 @@ static int __devinit aaci_probe_ac97(struct aaci *aaci) goto out; aaci->playback.pcm = &ac97_bus->pcms[0]; + aaci->capture.pcm = &ac97_bus->pcms[1]; out: return ret; @@ -801,7 +1029,7 @@ static int __devinit aaci_init_pcm(struct aaci *aaci) struct snd_pcm *pcm; int ret; - ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 0, &pcm); + ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm); if (ret == 0) { aaci->pcm = pcm; pcm->private_data = aaci; @@ -810,6 +1038,7 @@ static int __devinit aaci_init_pcm(struct aaci *aaci) strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name)); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops); } return ret; @@ -817,15 +1046,15 @@ static int __devinit aaci_init_pcm(struct aaci *aaci) static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) { - void __iomem *base = aaci->base + AACI_CSCH1; + struct aaci_runtime *aacirun = &aaci->playback; int i; - writel(TXCR_FEN | TXCR_TSZ16 | TXCR_TXEN, base + AACI_TXCR); + writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR); - for (i = 0; !(readl(base + AACI_SR) & SR_TXFF) && i < 4096; i++) - writel(0, aaci->base + AACI_DR1); + for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++) + writel(0, aacirun->fifo); - writel(0, base + AACI_TXCR); + writel(0, aacirun->base + AACI_TXCR); /* * Re-initialise the AACI after the FIFO depth test, to @@ -872,6 +1101,12 @@ static int __devinit aaci_probe(struct amba_device *dev, void *id) aaci->playback.base = aaci->base + AACI_CSCH1; aaci->playback.fifo = aaci->base + AACI_DR1; + /* + * Capture uses AACI channel 0 + */ + aaci->capture.base = aaci->base + AACI_CSCH1; + aaci->capture.fifo = aaci->base + AACI_DR1; + for (i = 0; i < 4; i++) { void __iomem *base = aaci->base + i * 0x14; @@ -907,7 +1142,7 @@ static int __devinit aaci_probe(struct amba_device *dev, void *id) ret = snd_card_register(aaci->card); if (ret == 0) { dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname, - aaci->fifosize); + aaci->fifosize); amba_set_drvdata(dev, aaci->card); return ret; } diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h index 9175ff9..924f69c 100644 --- a/sound/arm/aaci.h +++ b/sound/arm/aaci.h @@ -49,27 +49,27 @@ #define AACI_DR4 0x0f0 /* data read/written fifo 4 */ /* - * transmit fifo control register. P48 + * TX/RX fifo control register (CR). P48 */ -#define TXCR_FEN (1 << 16) /* fifo enable */ -#define TXCR_COMPACT (1 << 15) /* compact mode */ -#define TXCR_TSZ16 (0 << 13) /* 16 bits */ -#define TXCR_TSZ18 (1 << 13) /* 18 bits */ -#define TXCR_TSZ20 (2 << 13) /* 20 bits */ -#define TXCR_TSZ12 (3 << 13) /* 12 bits */ -#define TXCR_TX12 (1 << 12) /* transmits slot 12 */ -#define TXCR_TX11 (1 << 11) /* transmits slot 12 */ -#define TXCR_TX10 (1 << 10) /* transmits slot 12 */ -#define TXCR_TX9 (1 << 9) /* transmits slot 12 */ -#define TXCR_TX8 (1 << 8) /* transmits slot 12 */ -#define TXCR_TX7 (1 << 7) /* transmits slot 12 */ -#define TXCR_TX6 (1 << 6) /* transmits slot 12 */ -#define TXCR_TX5 (1 << 5) /* transmits slot 12 */ -#define TXCR_TX4 (1 << 4) /* transmits slot 12 */ -#define TXCR_TX3 (1 << 3) /* transmits slot 12 */ -#define TXCR_TX2 (1 << 2) /* transmits slot 12 */ -#define TXCR_TX1 (1 << 1) /* transmits slot 12 */ -#define TXCR_TXEN (1 << 0) /* transmit enable */ +#define CR_FEN (1 << 16) /* fifo enable */ +#define CR_COMPACT (1 << 15) /* compact mode */ +#define CR_SZ16 (0 << 13) /* 16 bits */ +#define CR_SZ18 (1 << 13) /* 18 bits */ +#define CR_SZ20 (2 << 13) /* 20 bits */ +#define CR_SZ12 (3 << 13) /* 12 bits */ +#define CR_SL12 (1 << 12) +#define CR_SL11 (1 << 11) +#define CR_SL10 (1 << 10) +#define CR_SL9 (1 << 9) +#define CR_SL8 (1 << 8) +#define CR_SL7 (1 << 7) +#define CR_SL6 (1 << 6) +#define CR_SL5 (1 << 5) +#define CR_SL4 (1 << 4) +#define CR_SL3 (1 << 3) +#define CR_SL2 (1 << 2) +#define CR_SL1 (1 << 1) +#define CR_EN (1 << 0) /* transmit enable */ /* * status register bits. P49 @@ -229,6 +229,7 @@ struct aaci { /* AC'97 */ struct mutex ac97_sem; struct snd_ac97_bus *ac97_bus; + struct snd_ac97 *ac97; u32 maincr; spinlock_t lock; |