aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb12
-rw-r--r--drivers/usb/core/hub.c100
-rw-r--r--drivers/usb/core/message.c11
-rw-r--r--drivers/usb/core/sysfs.c10
-rw-r--r--drivers/usb/core/usb.c1
-rw-r--r--drivers/usb/host/xhci-hub.c6
-rw-r--r--include/linux/usb.h12
7 files changed, 131 insertions, 21 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 6df4e6f..5f75f8f 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -208,3 +208,15 @@ Description:
such as ACPI. This file will read either "removable" or
"fixed" if the information is available, and "unknown"
otherwise.
+
+What: /sys/bus/usb/devices/.../ltm_capable
+Date: July 2012
+Contact: Sarah Sharp <sarah.a.sharp@linux.intel.com>
+Description:
+ USB 3.0 devices may optionally support Latency Tolerance
+ Messaging (LTM). They indicate their support by setting a bit
+ in the bmAttributes field of their SuperSpeed BOS descriptors.
+ If that bit is set for the device, ltm_capable will read "yes".
+ If the device doesn't support LTM, the file will read "no".
+ The file will be present for all speeds of USB devices, and will
+ always read "no" for USB 1.1 and USB 2.0 devices.
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9e900f9..3febe54 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2614,6 +2614,50 @@ static int check_port_resume_type(struct usb_device *udev,
return status;
}
+int usb_disable_ltm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ /* Check if the roothub and device supports LTM. */
+ if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+ !usb_device_supports_ltm(udev))
+ return 0;
+
+ /* Clear Feature LTM Enable can only be sent if the device is
+ * configured.
+ */
+ if (!udev->actconfig)
+ return 0;
+
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ /* Check if the roothub and device supports LTM. */
+ if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+ !usb_device_supports_ltm(udev))
+ return;
+
+ /* Set Feature LTM Enable can only be sent if the device is
+ * configured.
+ */
+ if (!udev->actconfig)
+ return;
+
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
#ifdef CONFIG_USB_SUSPEND
/*
@@ -2709,6 +2753,11 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_enabled == 1)
usb_set_usb2_hardware_lpm(udev, 0);
+ if (usb_disable_ltm(udev)) {
+ dev_err(&udev->dev, "%s Failed to disable LTM before suspend\n.",
+ __func__);
+ return -ENOMEM;
+ }
if (usb_unlocked_disable_lpm(udev)) {
dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.",
__func__);
@@ -2738,7 +2787,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_capable == 1)
usb_set_usb2_hardware_lpm(udev, 1);
- /* Try to enable USB3 LPM again */
+ /* Try to enable USB3 LTM and LPM again */
+ usb_enable_ltm(udev);
usb_unlocked_enable_lpm(udev);
/* System sleep transitions should never fail */
@@ -2939,7 +2989,8 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_capable == 1)
usb_set_usb2_hardware_lpm(udev, 1);
- /* Try to enable USB3 LPM */
+ /* Try to enable USB3 LTM and LPM */
+ usb_enable_ltm(udev);
usb_unlocked_enable_lpm(udev);
}
@@ -3492,6 +3543,15 @@ EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
void usb_unlocked_enable_lpm(struct usb_device *udev) { }
EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
#endif
@@ -4675,6 +4735,23 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
parent_hub = hdev_to_hub(parent_hdev);
+ /* Disable LPM and LTM while we reset the device and reinstall the alt
+ * settings. Device-initiated LPM settings, and system exit latency
+ * settings are cleared when the device is reset, so we have to set
+ * them up again.
+ */
+ ret = usb_unlocked_disable_lpm(udev);
+ if (ret) {
+ dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
+ goto re_enumerate;
+ }
+ ret = usb_disable_ltm(udev);
+ if (ret) {
+ dev_err(&udev->dev, "%s Failed to disable LTM\n.",
+ __func__);
+ goto re_enumerate;
+ }
+
set_bit(port1, parent_hub->busy_bits);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -4702,22 +4779,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
goto done;
mutex_lock(hcd->bandwidth_mutex);
- /* Disable LPM while we reset the device and reinstall the alt settings.
- * Device-initiated LPM settings, and system exit latency settings are
- * cleared when the device is reset, so we have to set them up again.
- */
- ret = usb_disable_lpm(udev);
- if (ret) {
- dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
- mutex_unlock(hcd->bandwidth_mutex);
- goto done;
- }
ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
if (ret < 0) {
dev_warn(&udev->dev,
"Busted HC? Not enough HCD resources for "
"old configuration.\n");
- usb_enable_lpm(udev);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
@@ -4729,7 +4795,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
udev->actconfig->desc.bConfigurationValue, ret);
- usb_enable_lpm(udev);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
@@ -4768,17 +4833,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
desc->bInterfaceNumber,
desc->bAlternateSetting,
ret);
- usb_unlocked_enable_lpm(udev);
goto re_enumerate;
}
}
- /* Now that the alt settings are re-installed, enable LPM. */
- usb_unlocked_enable_lpm(udev);
done:
+ /* Now that the alt settings are re-installed, enable LTM and LPM. */
+ usb_unlocked_enable_lpm(udev);
+ usb_enable_ltm(udev);
return 0;
re_enumerate:
+ /* LPM state doesn't matter when we're about to destroy the device. */
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 8b9d669..0ab7da2 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1174,6 +1174,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
put_device(&dev->actconfig->interface[i]->dev);
dev->actconfig->interface[i] = NULL;
}
+ usb_unlocked_disable_lpm(dev);
+ usb_disable_ltm(dev);
dev->actconfig = NULL;
if (dev->state == USB_STATE_CONFIGURED)
usb_set_device_state(dev, USB_STATE_ADDRESS);
@@ -1792,14 +1794,15 @@ free_interfaces:
* installed, so that the xHCI driver can recalculate the U1/U2
* timeouts.
*/
- if (usb_disable_lpm(dev)) {
+ if (dev->actconfig && usb_disable_lpm(dev)) {
dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
mutex_unlock(hcd->bandwidth_mutex);
return -ENOMEM;
}
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
- usb_enable_lpm(dev);
+ if (dev->actconfig)
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
usb_autosuspend_device(dev);
goto free_interfaces;
@@ -1819,7 +1822,7 @@ free_interfaces:
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
- usb_enable_lpm(dev);
+ /* Leave LPM disabled while the device is unconfigured. */
mutex_unlock(hcd->bandwidth_mutex);
usb_autosuspend_device(dev);
goto free_interfaces;
@@ -1877,6 +1880,8 @@ free_interfaces:
/* Now that the interfaces are installed, re-enable LPM. */
usb_unlocked_enable_lpm(dev);
+ /* Enable LTM if it was turned off by usb_disable_device. */
+ usb_enable_ltm(dev);
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 777f03c..682e825 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -253,6 +253,15 @@ show_removable(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(removable, S_IRUGO, show_removable, NULL);
+static ssize_t
+show_ltm_capable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ if (usb_device_supports_ltm(to_usb_device(dev)))
+ return sprintf(buf, "%s\n", "yes");
+ return sprintf(buf, "%s\n", "no");
+}
+static DEVICE_ATTR(ltm_capable, S_IRUGO, show_ltm_capable, NULL);
+
#ifdef CONFIG_PM
static ssize_t
@@ -649,6 +658,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_authorized.attr,
&dev_attr_remove.attr,
&dev_attr_removable.attr,
+ &dev_attr_ltm_capable.attr,
NULL,
};
static struct attribute_group dev_attr_grp = {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 25d0c61..cd8fb44 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -396,6 +396,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
+ dev->lpm_disable_count = 1;
atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7b01094..74bfc86 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -544,12 +544,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if (hcd->speed != HCD_USB3)
goto error;
+ /* Set the U1 and U2 exit latencies. */
memcpy(buf, &usb_bos_descriptor,
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
buf[12] = HCS_U1_LATENCY(temp);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+ /* Indicate whether the host has LTM support. */
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ if (HCC_LTC(temp))
+ buf[8] |= USB_LTM_SUPPORT;
+
spin_unlock_irqrestore(&xhci->lock, flags);
return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
case GetPortStatus:
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d4f9de1..f8506ed 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -561,7 +561,6 @@ struct usb_device {
struct usb3_lpm_parameters u1_params;
struct usb3_lpm_parameters u2_params;
unsigned lpm_disable_count;
- unsigned hub_initiated_lpm_disable_count;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -634,6 +633,17 @@ extern void usb_enable_lpm(struct usb_device *udev);
extern int usb_unlocked_disable_lpm(struct usb_device *udev);
extern void usb_unlocked_enable_lpm(struct usb_device *udev);
+extern int usb_disable_ltm(struct usb_device *udev);
+extern void usb_enable_ltm(struct usb_device *udev);
+
+static inline bool usb_device_supports_ltm(struct usb_device *udev)
+{
+ if (udev->speed != USB_SPEED_SUPER || !udev->bos || !udev->bos->ss_cap)
+ return false;
+ return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT;
+}
+
+
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
generated by cgit v1.1 at 2024-12-27 18:19:59 +0000