diff options
47 files changed, 2261 insertions, 415 deletions
diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt new file mode 100644 index 0000000..7c3bc8b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt @@ -0,0 +1,24 @@ +TI-NSPIRE Clocks + +Required properties: +- compatible: Valid compatible properties include: + "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model + "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model + "lsi,nspire-cx-clock" for the base clock in the CX model + "lsi,nspire-classic-clock" for the base clock in the older model + +- reg: Physical base address of the controller and length of memory mapped + region. + +Optional: +- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent + clock where it divides the rate from. + +Example: + +ahb_clk { + #clock-cells = <0>; + compatible = "lsi,nspire-cx-clock"; + reg = <0x900B0000 0x4>; + clocks = <&base_clk>; +}; diff --git a/Documentation/devicetree/bindings/clock/rockchip.txt b/Documentation/devicetree/bindings/clock/rockchip.txt new file mode 100644 index 0000000..a891c82 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip.txt @@ -0,0 +1,74 @@ +Device Tree Clock bindings for arch-rockchip + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +== Gate clocks == + +The gate registers form a continuos block which makes the dt node +structure a matter of taste, as either all gates can be put into +one gate clock spanning all registers or they can be divided into +the 10 individual gates containing 16 clocks each. +The code supports both approaches. + +Required properties: +- compatible : "rockchip,rk2928-gate-clk" +- reg : shall be the control register address(es) for the clock. +- #clock-cells : from common clock binding; shall be set to 1 +- clock-output-names : the corresponding gate names that the clock controls +- clocks : should contain the parent clock for each individual gate, + therefore the number of clocks elements should match the number of + clock-output-names + +Example using multiple gate clocks: + + clk_gates0: gate-clk@200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_i2s0", + "gate_i2s0_frac", "gate_i2s1", + "gate_i2s1_frac", "gate_i2s2", + "gate_i2s2_frac", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk@200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer2", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index cc37465..66c75b2 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -44,6 +44,11 @@ Optional child node properties: - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth divider. - silabs,pll-master: boolean, multisynth can change pll frequency. +- silabs,disable-state : clock output disable state, shall be + 0 = clock output is driven LOW when disabled + 1 = clock output is driven HIGH when disabled + 2 = clock output is FLOATING (HIGH-Z) when disabled + 3 = clock output is NEVER disabled ==Example== diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 729f524..d495521 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -12,22 +12,30 @@ Required properties: "allwinner,sun4i-axi-clk" - for the AXI clock "allwinner,sun4i-axi-gates-clk" - for the AXI gates "allwinner,sun4i-ahb-clk" - for the AHB clock - "allwinner,sun4i-ahb-gates-clk" - for the AHB gates + "allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10 + "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 "allwinner,sun4i-apb0-clk" - for the APB0 clock - "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates + "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10 + "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 "allwinner,sun4i-apb1-clk" - for the APB1 clock "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing - "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates + "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10 + "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13 Required properties for all clocks: - reg : shall be the control register address for the clock. - clocks : shall be the input parent clock(s) phandle for the clock - #clock-cells : from common clock binding; shall be set to 0 except for - "allwinner,sun4i-*-gates-clk" where it shall be set to 1 + "allwinner,*-gates-clk" where it shall be set to 1 -Additionally, "allwinner,sun4i-*-gates-clk" clocks require: +Additionally, "allwinner,*-gates-clk" clocks require: - clock-output-names : the corresponding gate names that the clock controls +Clock consumers should specify the desired clocks they use with a +"clocks" phandle cell. Consumers that are using a gated clock should +provide an additional ID in their clock property. The values of this +ID are documented in sunxi/<soc>-gates.txt. + For example: osc24M: osc24M@01c20050 { @@ -50,102 +58,3 @@ cpu: cpu@01c20054 { reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll1>; }; - - - -Gate clock outputs - -The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs; -their corresponding offsets as present on sun4i are listed below. Note that -some of these gates are not present on sun5i. - - * AXI gates ("allwinner,sun4i-axi-gates-clk") - - DRAM 0 - - * AHB gates ("allwinner,sun4i-ahb-gates-clk") - - USB0 0 - EHCI0 1 - OHCI0 2* - EHCI1 3 - OHCI1 4* - SS 5 - DMA 6 - BIST 7 - MMC0 8 - MMC1 9 - MMC2 10 - MMC3 11 - MS 12** - NAND 13 - SDRAM 14 - - ACE 16 - EMAC 17 - TS 18 - - SPI0 20 - SPI1 21 - SPI2 22 - SPI3 23 - PATA 24 - SATA 25** - GPS 26* - - VE 32 - TVD 33 - TVE0 34 - TVE1 35 - LCD0 36 - LCD1 37 - - CSI0 40 - CSI1 41 - - HDMI 43 - DE_BE0 44 - DE_BE1 45 - DE_FE0 46 - DE_FE1 47 - - MP 50 - - MALI400 52 - - * APB0 gates ("allwinner,sun4i-apb0-gates-clk") - - CODEC 0 - SPDIF 1* - AC97 2 - IIS 3 - - PIO 5 - IR0 6 - IR1 7 - - KEYPAD 10 - - * APB1 gates ("allwinner,sun4i-apb1-gates-clk") - - I2C0 0 - I2C1 1 - I2C2 2 - - CAN 4 - SCR 5 - PS20 6 - PS21 7 - - UART0 16 - UART1 17 - UART2 18 - UART3 19 - UART4 20 - UART5 21 - UART6 22 - UART7 23 - -Notation: - [*]: The datasheet didn't mention these, but they are present on AW code - [**]: The datasheet had this marked as "NC" but they are used on AW code diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt new file mode 100644 index 0000000..6a03475 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt @@ -0,0 +1,93 @@ +Gate clock outputs +------------------ + + * AXI gates ("allwinner,sun4i-axi-gates-clk") + + DRAM 0 + + * AHB gates ("allwinner,sun4i-ahb-gates-clk") + + USB0 0 + EHCI0 1 + OHCI0 2* + EHCI1 3 + OHCI1 4* + SS 5 + DMA 6 + BIST 7 + MMC0 8 + MMC1 9 + MMC2 10 + MMC3 11 + MS 12** + NAND 13 + SDRAM 14 + + ACE 16 + EMAC 17 + TS 18 + + SPI0 20 + SPI1 21 + SPI2 22 + SPI3 23 + PATA 24 + SATA 25** + GPS 26* + + VE 32 + TVD 33 + TVE0 34 + TVE1 35 + LCD0 36 + LCD1 37 + + CSI0 40 + CSI1 41 + + HDMI 43 + DE_BE0 44 + DE_BE1 45 + DE_FE1 46 + DE_FE1 47 + + MP 50 + + MALI400 52 + + * APB0 gates ("allwinner,sun4i-apb0-gates-clk") + + CODEC 0 + SPDIF 1* + AC97 2 + IIS 3 + + PIO 5 + IR0 6 + IR1 7 + + KEYPAD 10 + + * APB1 gates ("allwinner,sun4i-apb1-gates-clk") + + I2C0 0 + I2C1 1 + I2C2 2 + + CAN 4 + SCR 5 + PS20 6 + PS21 7 + + UART0 16 + UART1 17 + UART2 18 + UART3 19 + UART4 20 + UART5 21 + UART6 22 + UART7 23 + +Notation: + [*]: The datasheet didn't mention these, but they are present on AW code + [**]: The datasheet had this marked as "NC" but they are used on AW code diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt new file mode 100644 index 0000000..006b6df --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt @@ -0,0 +1,58 @@ +Gate clock outputs +------------------ + + * AXI gates ("allwinner,sun4i-axi-gates-clk") + + DRAM 0 + + * AHB gates ("allwinner,sun5i-a13-ahb-gates-clk") + + USBOTG 0 + EHCI 1 + OHCI 2 + + SS 5 + DMA 6 + BIST 7 + MMC0 8 + MMC1 9 + MMC2 10 + + NAND 13 + SDRAM 14 + + SPI0 20 + SPI1 21 + SPI2 22 + + STIMER 28 + + VE 32 + + LCD 36 + + CSI 40 + + DE_BE 44 + + DE_FE 46 + + IEP 51 + MALI400 52 + + * APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk") + + CODEC 0 + + PIO 5 + IR 6 + + * APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk") + + I2C0 0 + I2C1 1 + I2C2 2 + + UART1 17 + + UART3 19 diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt index a880c70..91d71cc 100644 --- a/Documentation/devicetree/bindings/clock/vt8500.txt +++ b/Documentation/devicetree/bindings/clock/vt8500.txt @@ -8,6 +8,8 @@ Required properties: - compatible : shall be one of the following: "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock "wm,wm8650-pll-clock" - for a WM8650 PLL clock + "wm,wm8750-pll-clock" - for a WM8750 PLL clock + "wm,wm8850-pll-clock" - for a WM8850 PLL clock "via,vt8500-device-clock" - for a VT/WM device clock Required properties for PLL clocks: diff --git a/MAINTAINERS b/MAINTAINERS index ff10583..c85bf69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2131,9 +2131,10 @@ M: Mike Turquette <mturquette@linaro.org> L: linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV) T: git git://git.linaro.org/people/mturquette/linux.git S: Maintained -F: drivers/clk/clk.c -F: drivers/clk/clk-* +F: drivers/clk/ +X: drivers/clk/clkdev.c F: include/linux/clk-pr* +F: include/linux/clk/ COMMON INTERNET FILE SYSTEM (CIFS) M: Steve French <sfrench@samba.org> diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index ec5836b..b25153e 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -23,7 +23,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/irqchip.h> -#include <linux/clk/tegra.h> +#include <linux/clk-provider.h> #include <asm/hardware/cache-l2x0.h> @@ -60,7 +60,7 @@ u32 tegra_uart_config[4] = { #ifdef CONFIG_OF void __init tegra_dt_init_irq(void) { - tegra_clocks_init(); + of_clk_init(NULL); tegra_pmc_init(); tegra_init_irq(); irqchip_init(); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index b6145ea..e6fb023 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -76,13 +76,15 @@ void __init ux500_init_irq(void) } else if (cpu_is_u9540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, U8500_CLKRST6_BASE); } else if (cpu_is_u8540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); - u8540_clk_init(); + u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); } } diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 54f3936..7819c40 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -158,6 +158,7 @@ config E500 config PPC_E500MC bool "e500mc Support" select PPC_FPU + select COMMON_CLK depends on E500 help This must be enabled for running on e500mc (and derivatives diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 0357ac4..51380d6 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,7 +42,7 @@ config COMMON_CLK_WM831X config COMMON_CLK_VERSATILE bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 ---help--- Supports clocking on ARM Reference designs: - Integrator/AP and Integrator/CP @@ -58,7 +58,6 @@ config COMMON_CLK_MAX77686 config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C - depends on OF select REGMAP_I2C select RATIONAL ---help--- @@ -81,6 +80,13 @@ config COMMON_CLK_AXI_CLKGEN Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx FPGAs. It is commonly used in Analog Devices' reference designs. +config CLK_PPC_CORENET + bool "Clock driver for PowerPC corenet platforms" + depends on PPC_E500MC && OF + ---help--- + This adds the clock driver support for Freescale PowerPC corenet + platforms using common clock framework. + endmenu source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f9cf708..4038c2b 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o +obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ @@ -24,6 +25,7 @@ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o @@ -39,3 +41,4 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o +obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 6d96741..6d55eb2 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -150,6 +150,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, struct clk_divider *divider = to_clk_divider(hw); int i, bestdiv = 0; unsigned long parent_rate, best = 0, now, maxdiv; + unsigned long parent_rate_saved = *best_parent_rate; if (!rate) rate = 1; @@ -173,6 +174,15 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, for (i = 1; i <= maxdiv; i++) { if (!_is_valid_div(divider, i)) continue; + if (rate * i == parent_rate_saved) { + /* + * It's the most ideal case if the requested rate can be + * divided from parent clock without needing to change + * parent rate, so return the divider immediately. + */ + *best_parent_rate = parent_rate_saved; + return i; + } parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), MULT_ROUND_UP(rate, i)); now = parent_rate / i; @@ -217,8 +227,12 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, if (divider->lock) spin_lock_irqsave(divider->lock, flags); - val = readl(divider->reg); - val &= ~(div_mask(divider) << divider->shift); + if (divider->flags & CLK_DIVIDER_HIWORD_MASK) { + val = div_mask(divider) << (divider->shift + 16); + } else { + val = readl(divider->reg); + val &= ~(div_mask(divider) << divider->shift); + } val |= value << divider->shift; writel(val, divider->reg); @@ -245,6 +259,13 @@ static struct clk *_register_divider(struct device *dev, const char *name, struct clk *clk; struct clk_init_data init; + if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) { + if (width + shift > 16) { + pr_warn("divider value exceeds LOWORD field\n"); + return ERR_PTR(-EINVAL); + } + } + /* allocate the divider */ div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL); if (!div) { diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 15114fe..790306e 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -53,12 +53,18 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable) if (gate->lock) spin_lock_irqsave(gate->lock, flags); - reg = readl(gate->reg); - - if (set) - reg |= BIT(gate->bit_idx); - else - reg &= ~BIT(gate->bit_idx); + if (gate->flags & CLK_GATE_HIWORD_MASK) { + reg = BIT(gate->bit_idx + 16); + if (set) + reg |= BIT(gate->bit_idx); + } else { + reg = readl(gate->reg); + + if (set) + reg |= BIT(gate->bit_idx); + else + reg &= ~BIT(gate->bit_idx); + } writel(reg, gate->reg); @@ -121,6 +127,13 @@ struct clk *clk_register_gate(struct device *dev, const char *name, struct clk *clk; struct clk_init_data init; + if (clk_gate_flags & CLK_GATE_HIWORD_MASK) { + if (bit_idx > 16) { + pr_err("gate bit exceeds LOWORD field\n"); + return ERR_PTR(-EINVAL); + } + } + /* allocate the gate */ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); if (!gate) { diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 25b1734..614444c 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -86,8 +86,12 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) if (mux->lock) spin_lock_irqsave(mux->lock, flags); - val = readl(mux->reg); - val &= ~(mux->mask << mux->shift); + if (mux->flags & CLK_MUX_HIWORD_MASK) { + val = mux->mask << (mux->shift + 16); + } else { + val = readl(mux->reg); + val &= ~(mux->mask << mux->shift); + } val |= index << mux->shift; writel(val, mux->reg); @@ -111,6 +115,15 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name, struct clk_mux *mux; struct clk *clk; struct clk_init_data init; + u8 width = 0; + + if (clk_mux_flags & CLK_MUX_HIWORD_MASK) { + width = fls(mask) - ffs(mask) + 1; + if (width + shift > 16) { + pr_err("mux value exceeds LOWORD field\n"); + return ERR_PTR(-EINVAL); + } + } /* allocate the mux */ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); diff --git a/drivers/clk/clk-nspire.c b/drivers/clk/clk-nspire.c new file mode 100644 index 0000000..a378db7 --- /dev/null +++ b/drivers/clk/clk-nspire.c @@ -0,0 +1,153 @@ +/* + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define MHZ (1000 * 1000) + +#define BASE_CPU_SHIFT 1 +#define BASE_CPU_MASK 0x7F + +#define CPU_AHB_SHIFT 12 +#define CPU_AHB_MASK 0x07 + +#define FIXED_BASE_SHIFT 8 +#define FIXED_BASE_MASK 0x01 + +#define CLASSIC_BASE_SHIFT 16 +#define CLASSIC_BASE_MASK 0x1F + +#define CX_BASE_SHIFT 15 +#define CX_BASE_MASK 0x3F + +#define CX_UNKNOWN_SHIFT 21 +#define CX_UNKNOWN_MASK 0x03 + +struct nspire_clk_info { + u32 base_clock; + u16 base_cpu_ratio; + u16 base_ahb_ratio; +}; + + +#define EXTRACT(var, prop) (((var)>>prop##_SHIFT) & prop##_MASK) +static void nspire_clkinfo_cx(u32 val, struct nspire_clk_info *clk) +{ + if (EXTRACT(val, FIXED_BASE)) + clk->base_clock = 48 * MHZ; + else + clk->base_clock = 6 * EXTRACT(val, CX_BASE) * MHZ; + + clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * EXTRACT(val, CX_UNKNOWN); + clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1); +} + +static void nspire_clkinfo_classic(u32 val, struct nspire_clk_info *clk) +{ + if (EXTRACT(val, FIXED_BASE)) + clk->base_clock = 27 * MHZ; + else + clk->base_clock = (300 - 6 * EXTRACT(val, CLASSIC_BASE)) * MHZ; + + clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * 2; + clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1); +} + +static void __init nspire_ahbdiv_setup(struct device_node *node, + void (*get_clkinfo)(u32, struct nspire_clk_info *)) +{ + u32 val; + void __iomem *io; + struct clk *clk; + const char *clk_name = node->name; + const char *parent_name; + struct nspire_clk_info info; + + io = of_iomap(node, 0); + if (!io) + return; + val = readl(io); + iounmap(io); + + get_clkinfo(val, &info); + + of_property_read_string(node, "clock-output-names", &clk_name); + parent_name = of_clk_get_parent_name(node, 0); + + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0, + 1, info.base_ahb_ratio); + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} + +static void __init nspire_ahbdiv_setup_cx(struct device_node *node) +{ + nspire_ahbdiv_setup(node, nspire_clkinfo_cx); +} + +static void __init nspire_ahbdiv_setup_classic(struct device_node *node) +{ + nspire_ahbdiv_setup(node, nspire_clkinfo_classic); +} + +CLK_OF_DECLARE(nspire_ahbdiv_cx, "lsi,nspire-cx-ahb-divider", + nspire_ahbdiv_setup_cx); +CLK_OF_DECLARE(nspire_ahbdiv_classic, "lsi,nspire-classic-ahb-divider", + nspire_ahbdiv_setup_classic); + +static void __init nspire_clk_setup(struct device_node *node, + void (*get_clkinfo)(u32, struct nspire_clk_info *)) +{ + u32 val; + void __iomem *io; + struct clk *clk; + const char *clk_name = node->name; + struct nspire_clk_info info; + + io = of_iomap(node, 0); + if (!io) + return; + val = readl(io); + iounmap(io); + + get_clkinfo(val, &info); + + of_property_read_string(node, "clock-output-names", &clk_name); + + clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, + info.base_clock); + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + return; + + pr_info("TI-NSPIRE Base: %uMHz CPU: %uMHz AHB: %uMHz\n", + info.base_clock / MHZ, + info.base_clock / info.base_cpu_ratio / MHZ, + info.base_clock / info.base_ahb_ratio / MHZ); +} + +static void __init nspire_clk_setup_cx(struct device_node *node) +{ + nspire_clk_setup(node, nspire_clkinfo_cx); +} + +static void __init nspire_clk_setup_classic(struct device_node *node) +{ + nspire_clk_setup(node, nspire_clkinfo_classic); +} + +CLK_OF_DECLARE(nspire_clk_cx, "lsi,nspire-cx-clock", nspire_clk_setup_cx); +CLK_OF_DECLARE(nspire_clk_classic, "lsi,nspire-classic-clock", + nspire_clk_setup_classic); diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-ppc-corenet.c new file mode 100644 index 0000000..e958707 --- /dev/null +++ b/drivers/clk/clk-ppc-corenet.c @@ -0,0 +1,280 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * clock driver for Freescale PowerPC corenet SoCs. + */ +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/slab.h> + +struct cmux_clk { + struct clk_hw hw; + void __iomem *reg; + u32 flags; +}; + +#define PLL_KILL BIT(31) +#define CLKSEL_SHIFT 27 +#define CLKSEL_ADJUST BIT(0) +#define to_cmux_clk(p) container_of(p, struct cmux_clk, hw) + +static void __iomem *base; +static unsigned int clocks_per_pll; + +static int cmux_set_parent(struct clk_hw *hw, u8 idx) +{ + struct cmux_clk *clk = to_cmux_clk(hw); + u32 clksel; + + clksel = ((idx / clocks_per_pll) << 2) + idx % clocks_per_pll; + if (clk->flags & CLKSEL_ADJUST) + clksel += 8; + clksel = (clksel & 0xf) << CLKSEL_SHIFT; + iowrite32be(clksel, clk->reg); + + return 0; +} + +static u8 cmux_get_parent(struct clk_hw *hw) +{ + struct cmux_clk *clk = to_cmux_clk(hw); + u32 clksel; + + clksel = ioread32be(clk->reg); + clksel = (clksel >> CLKSEL_SHIFT) & 0xf; + if (clk->flags & CLKSEL_ADJUST) + clksel -= 8; + clksel = (clksel >> 2) * clocks_per_pll + clksel % 4; + + return clksel; +} + +const struct clk_ops cmux_ops = { + .get_parent = cmux_get_parent, + .set_parent = cmux_set_parent, +}; + +static void __init core_mux_init(struct device_node *np) +{ + struct clk *clk; + struct clk_init_data init; + struct cmux_clk *cmux_clk; + struct device_node *node; + int rc, count, i; + u32 offset; + const char *clk_name; + const char **parent_names; + + rc = of_property_read_u32(np, "reg", &offset); + if (rc) { + pr_err("%s: could not get reg property\n", np->name); + return; + } + + /* get the input clock source count */ + count = of_property_count_strings(np, "clock-names"); + if (count < 0) { + pr_err("%s: get clock count error\n", np->name); + return; + } + parent_names = kzalloc((sizeof(char *) * count), GFP_KERNEL); + if (!parent_names) { + pr_err("%s: could not allocate parent_names\n", __func__); + return; + } + + for (i = 0; i < count; i++) + parent_names[i] = of_clk_get_parent_name(np, i); + + cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL); + if (!cmux_clk) { + pr_err("%s: could not allocate cmux_clk\n", __func__); + goto err_name; + } + cmux_clk->reg = base + offset; + + node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen"); + if (node && (offset >= 0x80)) + cmux_clk->flags = CLKSEL_ADJUST; + + rc = of_property_read_string_index(np, "clock-output-names", + 0, &clk_name); + if (rc) { + pr_err("%s: read clock names error\n", np->name); + goto err_clk; + } + + init.name = clk_name; + init.ops = &cmux_ops; + init.parent_names = parent_names; + init.num_parents = count; + init.flags = 0; + cmux_clk->hw.init = &init; + + clk = clk_register(NULL, &cmux_clk->hw); + if (IS_ERR(clk)) { + pr_err("%s: could not register clock\n", clk_name); + goto err_clk; + } + + rc = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (rc) { + pr_err("Could not register clock provider for node:%s\n", + np->name); + goto err_clk; + } + goto err_name; + +err_clk: + kfree(cmux_clk); +err_name: + /* free *_names because they are reallocated when registered */ + kfree(parent_names); +} + +static void __init core_pll_init(struct device_node *np) +{ + u32 offset, mult; + int i, rc, count; + const char *clk_name, *parent_name; + struct clk_onecell_data *onecell_data; + struct clk **subclks; + + rc = of_property_read_u32(np, "reg", &offset); + if (rc) { + pr_err("%s: could not get reg property\n", np->name); + return; + } + + /* get the multiple of PLL */ + mult = ioread32be(base + offset); + + /* check if this PLL is disabled */ + if (mult & PLL_KILL) { + pr_debug("PLL:%s is disabled\n", np->name); + return; + } + mult = (mult >> 1) & 0x3f; + + parent_name = of_clk_get_parent_name(np, 0); + if (!parent_name) { + pr_err("PLL: %s must have a parent\n", np->name); + return; + } + + count = of_property_count_strings(np, "clock-output-names"); + if (count < 0 || count > 4) { + pr_err("%s: clock is not supported\n", np->name); + return; + } + + /* output clock number per PLL */ + clocks_per_pll = count; + + subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL); + if (!subclks) { + pr_err("%s: could not allocate subclks\n", __func__); + return; + } + + onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!onecell_data) { + pr_err("%s: could not allocate onecell_data\n", __func__); + goto err_clks; + } + + for (i = 0; i < count; i++) { + rc = of_property_read_string_index(np, "clock-output-names", + i, &clk_name); + if (rc) { + pr_err("%s: could not get clock names\n", np->name); + goto err_cell; + } + + /* + * when count == 4, there are 4 output clocks: + * /1, /2, /3, /4 respectively + * when count < 4, there are at least 2 output clocks: + * /1, /2, (/4, if count == 3) respectively. + */ + if (count == 4) + subclks[i] = clk_register_fixed_factor(NULL, clk_name, + parent_name, 0, mult, 1 + i); + else + + subclks[i] = clk_register_fixed_factor(NULL, clk_name, + parent_name, 0, mult, 1 << i); + + if (IS_ERR(subclks[i])) { + pr_err("%s: could not register clock\n", clk_name); + goto err_cell; + } + } + + onecell_data->clks = subclks; + onecell_data->clk_num = count; + + rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data); + if (rc) { + pr_err("Could not register clk provider for node:%s\n", + np->name); + goto err_cell; + } + + return; +err_cell: + kfree(onecell_data); +err_clks: + kfree(subclks); +} + +static const struct of_device_id clk_match[] __initconst = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "fsl,core-pll-clock", .data = core_pll_init, }, + { .compatible = "fsl,core-mux-clock", .data = core_mux_init, }, + {} +}; + +static int __init ppc_corenet_clk_probe(struct platform_device *pdev) +{ + struct device_node *np; + + np = pdev->dev.of_node; + base = of_iomap(np, 0); + if (!base) { + dev_err(&pdev->dev, "iomap error\n"); + return -ENOMEM; + } + of_clk_init(clk_match); + + return 0; +} + +static const struct of_device_id ppc_clk_ids[] __initconst = { + { .compatible = "fsl,qoriq-clockgen-1.0", }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, + {} +}; + +static struct platform_driver ppc_corenet_clk_driver = { + .driver = { + .name = "ppc_corenet_clock", + .owner = THIS_MODULE, + .of_match_table = ppc_clk_ids, + }, + .probe = ppc_corenet_clk_probe, +}; + +static int __init ppc_corenet_clk_init(void) +{ + return platform_driver_register(&ppc_corenet_clk_driver); +} +subsys_initcall(ppc_corenet_clk_init); diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 24f5536..c50e837 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -851,6 +851,41 @@ static int _si5351_clkout_set_drive_strength( return 0; } +static int _si5351_clkout_set_disable_state( + struct si5351_driver_data *drvdata, int num, + enum si5351_disable_state state) +{ + u8 reg = (num < 4) ? SI5351_CLK3_0_DISABLE_STATE : + SI5351_CLK7_4_DISABLE_STATE; + u8 shift = (num < 4) ? (2 * num) : (2 * (num-4)); + u8 mask = SI5351_CLK_DISABLE_STATE_MASK << shift; + u8 val; + + if (num > 8) + return -EINVAL; + + switch (state) { + case SI5351_DISABLE_LOW: + val = SI5351_CLK_DISABLE_STATE_LOW; + break; + case SI5351_DISABLE_HIGH: + val = SI5351_CLK_DISABLE_STATE_HIGH; + break; + case SI5351_DISABLE_FLOATING: + val = SI5351_CLK_DISABLE_STATE_FLOAT; + break; + case SI5351_DISABLE_NEVER: + val = SI5351_CLK_DISABLE_STATE_NEVER; + break; + default: + return 0; + } + + si5351_set_bits(drvdata, reg, mask, val << shift); + + return 0; +} + static int si5351_clkout_prepare(struct clk_hw *hw) { struct si5351_hw_data *hwdata = @@ -1225,6 +1260,33 @@ static int si5351_dt_parse(struct i2c_client *client) } } + if (!of_property_read_u32(child, "silabs,disable-state", + &val)) { + switch (val) { + case 0: + pdata->clkout[num].disable_state = + SI5351_DISABLE_LOW; + break; + case 1: + pdata->clkout[num].disable_state = + SI5351_DISABLE_HIGH; + break; + case 2: + pdata->clkout[num].disable_state = + SI5351_DISABLE_FLOATING; + break; + case 3: + pdata->clkout[num].disable_state = + SI5351_DISABLE_NEVER; + break; + default: + dev_err(&client->dev, + "invalid disable state %d for clkout %d\n", + val, num); + return -EINVAL; + } + } + if (!of_property_read_u32(child, "clock-frequency", &val)) pdata->clkout[num].rate = val; @@ -1281,9 +1343,6 @@ static int si5351_i2c_probe(struct i2c_client *client, /* Disable interrupts */ si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0); - /* Set disabled output drivers to drive low */ - si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00); - si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00); /* Ensure pll select is on XTAL for Si5351A/B */ if (drvdata->variant != SI5351_VARIANT_C) si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, @@ -1327,6 +1386,15 @@ static int si5351_i2c_probe(struct i2c_client *client, n, pdata->clkout[n].drive); return ret; } + + ret = _si5351_clkout_set_disable_state(drvdata, n, + pdata->clkout[n].disable_state); + if (ret) { + dev_err(&client->dev, + "failed set disable state of clkout%d to %d\n", + n, pdata->clkout[n].disable_state); + return ret; + } } /* register xtal input clock gate */ @@ -1500,7 +1568,10 @@ static int si5351_i2c_probe(struct i2c_client *client, } static const struct i2c_device_id si5351_i2c_ids[] = { - { "silabs,si5351", 0 }, + { "si5351a", 0 }, + { "si5351a-msop", 0 }, + { "si5351b", 0 }, + { "si5351c", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids); diff --git a/drivers/clk/clk-si5351.h b/drivers/clk/clk-si5351.h index af41b50..c0dbf26 100644 --- a/drivers/clk/clk-si5351.h +++ b/drivers/clk/clk-si5351.h @@ -81,6 +81,7 @@ #define SI5351_CLK3_0_DISABLE_STATE 24 #define SI5351_CLK7_4_DISABLE_STATE 25 +#define SI5351_CLK_DISABLE_STATE_MASK 3 #define SI5351_CLK_DISABLE_STATE_LOW 0 #define SI5351_CLK_DISABLE_STATE_HIGH 1 #define SI5351_CLK_DISABLE_STATE_FLOAT 2 diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index 3af729b..1ada79a 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -95,14 +95,14 @@ static int twl6040_clk_probe(struct platform_device *pdev) if (IS_ERR(clkdata->clk)) return PTR_ERR(clkdata->clk); - dev_set_drvdata(&pdev->dev, clkdata); + platform_set_drvdata(pdev, clkdata); return 0; } static int twl6040_clk_remove(struct platform_device *pdev) { - struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); + struct twl6040_clk *clkdata = platform_get_drvdata(pdev); clk_unregister(clkdata->clk); diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index 553ac35..82306f5 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -42,6 +42,7 @@ struct clk_device { #define PLL_TYPE_VT8500 0 #define PLL_TYPE_WM8650 1 #define PLL_TYPE_WM8750 2 +#define PLL_TYPE_WM8850 3 struct clk_pll { struct clk_hw hw; @@ -156,10 +157,6 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, divisor = parent_rate / rate; - /* If prate / rate would be decimal, incr the divisor */ - if (rate * divisor < parent_rate) - divisor++; - if (divisor == cdev->div_mask + 1) divisor = 0; @@ -327,6 +324,15 @@ CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init); #define WM8750_BITS_TO_VAL(f, m, d1, d2) \ ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2) +/* Helper macros for PLL_WM8850 */ +#define WM8850_PLL_MUL(x) ((((x >> 16) & 0x7F) + 1) * 2) +#define WM8850_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 3))) + +#define WM8850_BITS_TO_FREQ(r, m, d1, d2) \ + (r * ((m + 1) * 2) / ((d1+1) * (1 << d2))) + +#define WM8850_BITS_TO_VAL(m, d1, d2) \ + ((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2) static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate, u32 *multiplier, u32 *prediv) @@ -466,6 +472,49 @@ static void wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate, *divisor2 = best_div2; } +static void wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate, + u32 *multiplier, u32 *divisor1, u32 *divisor2) +{ + u32 mul, div1, div2; + u32 best_mul, best_div1, best_div2; + unsigned long tclk, rate_err, best_err; + + best_err = (unsigned long)-1; + + /* Find the closest match (lower or equal to requested) */ + for (div1 = 1; div1 >= 0; div1--) + for (div2 = 3; div2 >= 0; div2--) + for (mul = 0; mul <= 127; mul++) { + tclk = parent_rate * ((mul + 1) * 2) / + ((div1 + 1) * (1 << div2)); + if (tclk > rate) + continue; + /* error will always be +ve */ + rate_err = rate - tclk; + if (rate_err == 0) { + *multiplier = mul; + *divisor1 = div1; + *divisor2 = div2; + return; + } + + if (rate_err < best_err) { + best_err = rate_err; + best_mul = mul; + best_div1 = div1; + best_div2 = div2; + } + } + + /* if we got here, it wasn't an exact match */ + pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, + rate - best_err); + + *multiplier = best_mul; + *divisor1 = best_div1; + *divisor2 = best_div2; +} + static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -489,6 +538,10 @@ static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate, wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2); pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2); break; + case PLL_TYPE_WM8850: + wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2); + pll_val = WM8850_BITS_TO_VAL(mul, div1, div2); + break; default: pr_err("%s: invalid pll type\n", __func__); return 0; @@ -525,6 +578,10 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate, wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2); round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2); break; + case PLL_TYPE_WM8850: + wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2); + round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2); + break; default: round_rate = 0; } @@ -552,6 +609,10 @@ static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw, pll_freq = parent_rate * WM8750_PLL_MUL(pll_val); pll_freq /= WM8750_PLL_DIV(pll_val); break; + case PLL_TYPE_WM8850: + pll_freq = parent_rate * WM8850_PLL_MUL(pll_val); + pll_freq /= WM8850_PLL_DIV(pll_val); + break; default: pll_freq = 0; } @@ -628,6 +689,12 @@ static void __init wm8750_pll_init(struct device_node *node) } CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init); +static void __init wm8850_pll_init(struct device_node *node) +{ + vtwm_pll_clk_init(node, PLL_TYPE_WM8850); +} +CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init); + void __init vtwm_clk_init(void __iomem *base) { if (!base) diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index 16ed068..1b3f8c9 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -97,7 +97,7 @@ static int wm831x_fll_prepare(struct clk_hw *hw) struct wm831x *wm831x = clkdata->wm831x; int ret; - ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, + ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, WM831X_FLL_ENA, WM831X_FLL_ENA); if (ret != 0) dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret); @@ -114,9 +114,9 @@ static void wm831x_fll_unprepare(struct clk_hw *hw) struct wm831x *wm831x = clkdata->wm831x; int ret; - ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0); + ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, WM831X_FLL_ENA, 0); if (ret != 0) - dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret); + dev_crit(wm831x->dev, "Failed to disable FLL: %d\n", ret); } static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw, @@ -299,8 +299,8 @@ static void wm831x_clkout_unprepare(struct clk_hw *hw) } static const char *wm831x_clkout_parents[] = { - "xtal", "fll", + "xtal", }; static u8 wm831x_clkout_get_parent(struct clk_hw *hw) @@ -318,9 +318,9 @@ static u8 wm831x_clkout_get_parent(struct clk_hw *hw) } if (ret & WM831X_CLKOUT_SRC) - return 0; - else return 1; + else + return 0; } static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent) @@ -384,7 +384,7 @@ static int wm831x_clk_probe(struct platform_device *pdev) if (IS_ERR(clkdata->clkout)) return PTR_ERR(clkdata->clkout); - dev_set_drvdata(&pdev->dev, clkdata); + platform_set_drvdata(pdev, clkdata); return 0; } diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 1144e8c..54a191c 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -107,7 +107,7 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level) seq_printf(s, "%*s%-*s %-11d %-12d %-10lu", level * 3 + 1, "", 30 - level * 3, c->name, - c->enable_count, c->prepare_count, c->rate); + c->enable_count, c->prepare_count, clk_get_rate(c)); seq_printf(s, "\n"); } @@ -166,7 +166,7 @@ static void clk_dump_one(struct seq_file *s, struct clk *c, int level) seq_printf(s, "\"%s\": { ", c->name); seq_printf(s, "\"enable_count\": %d,", c->enable_count); seq_printf(s, "\"prepare_count\": %d,", c->prepare_count); - seq_printf(s, "\"rate\": %lu", c->rate); + seq_printf(s, "\"rate\": %lu", clk_get_rate(c)); } static void clk_dump_subtree(struct seq_file *s, struct clk *c, int level) @@ -534,7 +534,7 @@ static int clk_disable_unused(void) return 0; } -late_initcall(clk_disable_unused); +late_initcall_sync(clk_disable_unused); /*** helper functions ***/ @@ -1216,7 +1216,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk_prepare_lock(); /* bail early if nothing to do */ - if (rate == clk->rate) + if (rate == clk_get_rate(clk)) goto out; if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) { @@ -1377,23 +1377,33 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index) unsigned long flags; int ret = 0; struct clk *old_parent = clk->parent; - bool migrated_enable = false; - /* migrate prepare */ - if (clk->prepare_count) + /* + * Migrate prepare state between parents and prevent race with + * clk_enable(). + * + * If the clock is not prepared, then a race with + * clk_enable/disable() is impossible since we already have the + * prepare lock (future calls to clk_enable() need to be preceded by + * a clk_prepare()). + * + * If the clock is prepared, migrate the prepared state to the new + * parent and also protect against a race with clk_enable() by + * forcing the clock and the new parent on. This ensures that all + * future calls to clk_enable() are practically NOPs with respect to + * hardware and software states. + * + * See also: Comment for clk_set_parent() below. + */ + if (clk->prepare_count) { __clk_prepare(parent); - - flags = clk_enable_lock(); - - /* migrate enable */ - if (clk->enable_count) { - __clk_enable(parent); - migrated_enable = true; + clk_enable(parent); + clk_enable(clk); } /* update the clk tree topology */ + flags = clk_enable_lock(); clk_reparent(clk, parent); - clk_enable_unlock(flags); /* change clock input source */ @@ -1401,43 +1411,27 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index) ret = clk->ops->set_parent(clk->hw, p_index); if (ret) { - /* - * The error handling is tricky due to that we need to release - * the spinlock while issuing the .set_parent callback. This - * means the new parent might have been enabled/disabled in - * between, which must be considered when doing rollback. - */ flags = clk_enable_lock(); - clk_reparent(clk, old_parent); - - if (migrated_enable && clk->enable_count) { - __clk_disable(parent); - } else if (migrated_enable && (clk->enable_count == 0)) { - __clk_disable(old_parent); - } else if (!migrated_enable && clk->enable_count) { - __clk_disable(parent); - __clk_enable(old_parent); - } - clk_enable_unlock(flags); - if (clk->prepare_count) + if (clk->prepare_count) { + clk_disable(clk); + clk_disable(parent); __clk_unprepare(parent); - + } return ret; } - /* clean up enable for old parent if migration was done */ - if (migrated_enable) { - flags = clk_enable_lock(); - __clk_disable(old_parent); - clk_enable_unlock(flags); - } - - /* clean up prepare for old parent if migration was done */ - if (clk->prepare_count) + /* + * Finish the migration of prepare state and undo the changes done + * for preventing a race with clk_enable(). + */ + if (clk->prepare_count) { + clk_disable(clk); + clk_disable(old_parent); __clk_unprepare(old_parent); + } /* update debugfs with new clk tree topology */ clk_debug_reparent(clk, parent); @@ -1449,12 +1443,17 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index) * @clk: the mux clk whose input we are switching * @parent: the new input to clk * - * Re-parent clk to use parent as it's new input source. If clk has the - * CLK_SET_PARENT_GATE flag set then clk must be gated for this - * operation to succeed. After successfully changing clk's parent - * clk_set_parent will update the clk topology, sysfs topology and - * propagate rate recalculation via __clk_recalc_rates. Returns 0 on - * success, -EERROR otherwise. + * Re-parent clk to use parent as its new input source. If clk is in + * prepared state, the clk will get enabled for the duration of this call. If + * that's not acceptable for a specific clk (Eg: the consumer can't handle + * that, the reparenting is glitchy in hardware, etc), use the + * CLK_SET_PARENT_GATE flag to allow reparenting only when clk is unprepared. + * + * After successfully changing clk's parent clk_set_parent will update the + * clk topology, sysfs topology and propagate rate recalculation via + * __clk_recalc_rates. + * + * Returns 0 on success, -EERROR otherwise. */ int clk_set_parent(struct clk *clk, struct clk *parent) { @@ -1494,8 +1493,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } /* propagate PRE_RATE_CHANGE notifications */ - if (clk->notifier_count) - ret = __clk_speculate_rates(clk, p_rate); + ret = __clk_speculate_rates(clk, p_rate); /* abort if a driver objects */ if (ret & NOTIFY_STOP_MASK) diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile new file mode 100644 index 0000000..8d3aefa --- /dev/null +++ b/drivers/clk/rockchip/Makefile @@ -0,0 +1,5 @@ +# +# Rockchip Clock specific Makefile +# + +obj-y += clk-rockchip.o diff --git a/drivers/clk/rockchip/clk-rockchip.c b/drivers/clk/rockchip/clk-rockchip.c new file mode 100644 index 0000000..967c141 --- /dev/null +++ b/drivers/clk/rockchip/clk-rockchip.c @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> + +static DEFINE_SPINLOCK(clk_lock); + +/* + * Gate clocks + */ + +static void __init rk2928_gate_clk_init(struct device_node *node, + void *data) +{ + struct clk_onecell_data *clk_data; + const char *clk_parent; + const char *clk_name; + void __iomem *reg; + void __iomem *reg_idx; + int flags; + int qty; + int reg_bit; + int clkflags = CLK_SET_RATE_PARENT; + int i; + + qty = of_property_count_strings(node, "clock-output-names"); + if (qty < 0) { + pr_err("%s: error in clock-output-names %d\n", __func__, qty); + return; + } + + if (qty == 0) { + pr_info("%s: nothing to do\n", __func__); + return; + } + + reg = of_iomap(node, 0); + + clk_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_data) + return; + + clk_data->clks = kzalloc(qty * sizeof(struct clk *), GFP_KERNEL); + if (!clk_data->clks) { + kfree(clk_data); + return; + } + + flags = CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE; + + for (i = 0; i < qty; i++) { + of_property_read_string_index(node, "clock-output-names", + i, &clk_name); + + /* ignore empty slots */ + if (!strcmp("reserved", clk_name)) + continue; + + clk_parent = of_clk_get_parent_name(node, i); + + /* keep all gates untouched for now */ + clkflags |= CLK_IGNORE_UNUSED; + + reg_idx = reg + (4 * (i / 16)); + reg_bit = (i % 16); + + clk_data->clks[i] = clk_register_gate(NULL, clk_name, + clk_parent, clkflags, + reg_idx, reg_bit, + flags, + &clk_lock); + WARN_ON(IS_ERR(clk_data->clks[i])); + } + + clk_data->clk_num = qty; + + of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); +} +CLK_OF_DECLARE(rk2928_gate, "rockchip,rk2928-gate-clk", rk2928_gate_clk_init); diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index addc738..1bdb882 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -356,8 +356,8 @@ struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = { /* list of mux clocks supported in all exynos4 soc's */ struct samsung_mux_clock exynos4_mux_clks[] __initdata = { - MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, - CLK_SET_RATE_PARENT, 0), + MUX_FA(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, + CLK_SET_RATE_PARENT, 0, "mout_apll"), MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1), MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), @@ -385,9 +385,9 @@ struct samsung_mux_clock exynos4210_mux_clks[] __initdata = { MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1), MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4), MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4), - MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"), + MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "mout_mpll"), MUX_A(mout_core, "mout_core", mout_core_p4210, - SRC_CPU, 16, 1, "mout_core"), + SRC_CPU, 16, 1, "moutcore"), MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210, SRC_TOP0, 8, 1, "sclk_vpll"), MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4), @@ -424,8 +424,8 @@ struct samsung_mux_clock exynos4210_mux_clks[] __initdata = { /* list of mux clocks supported in exynos4x12 soc */ struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = { - MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12, - SRC_CPU, 24, 1), + MUX_A(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12, + SRC_CPU, 24, 1, "mout_mpll"), MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1), MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1), MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12, @@ -449,7 +449,8 @@ struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = { SRC_DMC, 12, 1, "sclk_mpll"), MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p, SRC_TOP0, 8, 1, "sclk_vpll"), - MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1), + MUX_A(mout_core, "mout_core", mout_core_p4x12, + SRC_CPU, 16, 1, "moutcore"), MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4), MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4), MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4), @@ -537,7 +538,7 @@ struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), - DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"), + DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "armclk"), DIV_A(sclk_apll, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3, "sclk_apll"), DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, @@ -1070,9 +1071,9 @@ void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc exynos4_so pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n" "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n", exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12", - _get_rate("sclk_apll"), _get_rate("sclk_mpll"), + _get_rate("sclk_apll"), _get_rate("mout_mpll"), _get_rate("sclk_epll"), _get_rate("sclk_vpll"), - _get_rate("arm_clk")); + _get_rate("armclk")); } diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h index e4ad6ea..2f7dba2 100644 --- a/drivers/clk/samsung/clk.h +++ b/drivers/clk/samsung/clk.h @@ -144,6 +144,9 @@ struct samsung_mux_clock { #define MUX_F(_id, cname, pnames, o, s, w, f, mf) \ __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL) +#define MUX_FA(_id, cname, pnames, o, s, w, f, mf, a) \ + __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, a) + /** * @id: platform specific id of the clock. * struct samsung_div_clock: information about div clock diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 8492ad1..412912b 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -239,7 +239,7 @@ struct mux_data { u8 shift; }; -static const __initconst struct mux_data cpu_data = { +static const __initconst struct mux_data cpu_mux_data = { .shift = 16, }; @@ -333,22 +333,34 @@ struct gates_data { DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); }; -static const __initconst struct gates_data axi_gates_data = { +static const __initconst struct gates_data sun4i_axi_gates_data = { .mask = {1}, }; -static const __initconst struct gates_data ahb_gates_data = { +static const __initconst struct gates_data sun4i_ahb_gates_data = { .mask = {0x7F77FFF, 0x14FB3F}, }; -static const __initconst struct gates_data apb0_gates_data = { +static const __initconst struct gates_data sun5i_a13_ahb_gates_data = { + .mask = {0x107067e7, 0x185111}, +}; + +static const __initconst struct gates_data sun4i_apb0_gates_data = { .mask = {0x4EF}, }; -static const __initconst struct gates_data apb1_gates_data = { +static const __initconst struct gates_data sun5i_a13_apb0_gates_data = { + .mask = {0x61}, +}; + +static const __initconst struct gates_data sun4i_apb1_gates_data = { .mask = {0xFF00F7}, }; +static const __initconst struct gates_data sun5i_a13_apb1_gates_data = { + .mask = {0xa0007}, +}; + static void __init sunxi_gates_clk_setup(struct device_node *node, struct gates_data *data) { @@ -421,17 +433,20 @@ static const __initconst struct of_device_id clk_div_match[] = { /* Matches for mux clocks */ static const __initconst struct of_device_id clk_mux_match[] = { - {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,}, + {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_mux_data,}, {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,}, {} }; /* Matches for gate clocks */ static const __initconst struct of_device_id clk_gates_match[] = { - {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,}, - {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,}, - {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,}, - {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,}, + {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,}, + {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,}, + {.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,}, + {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,}, + {.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,}, + {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,}, + {.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,}, {} }; diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 17c2cc0..197074a 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -117,10 +117,6 @@ #define PLLCX_MISC2_DEFAULT 0x30211200 #define PLLCX_MISC3_DEFAULT 0x200 -#define PMC_PLLM_WB0_OVERRIDE 0x1dc -#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 -#define PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK BIT(27) - #define PMC_SATA_PWRGT 0x1ac #define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5) #define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4) @@ -128,38 +124,31 @@ #define pll_readl(offset, p) readl_relaxed(p->clk_base + offset) #define pll_readl_base(p) pll_readl(p->params->base_reg, p) #define pll_readl_misc(p) pll_readl(p->params->misc_reg, p) +#define pll_override_readl(offset, p) readl_relaxed(p->pmc + offset) #define pll_writel(val, offset, p) writel_relaxed(val, p->clk_base + offset) #define pll_writel_base(val, p) pll_writel(val, p->params->base_reg, p) #define pll_writel_misc(val, p) pll_writel(val, p->params->misc_reg, p) +#define pll_override_writel(val, offset, p) writel(val, p->pmc + offset) #define mask(w) ((1 << (w)) - 1) -#define divm_mask(p) mask(p->divm_width) -#define divn_mask(p) mask(p->divn_width) +#define divm_mask(p) mask(p->params->div_nmp->divm_width) +#define divn_mask(p) mask(p->params->div_nmp->divn_width) #define divp_mask(p) (p->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK : \ - mask(p->divp_width)) + mask(p->params->div_nmp->divp_width)) #define divm_max(p) (divm_mask(p)) #define divn_max(p) (divn_mask(p)) #define divp_max(p) (1 << (divp_mask(p))) - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -/* PLLXC has 4-bit PDIV, but entry 15 is not allowed in h/w */ -#define PLLXC_PDIV_MAX 14 - -/* non-monotonic mapping below is not a typo */ -static u8 pllxc_p[PLLXC_PDIV_MAX + 1] = { - /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ - /* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32 -}; - -#define PLLCX_PDIV_MAX 7 -static u8 pllcx_p[PLLCX_PDIV_MAX + 1] = { - /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7 */ - /* p: */ 1, 2, 3, 4, 6, 8, 12, 16 +static struct div_nmp default_nmp = { + .divn_shift = PLL_BASE_DIVN_SHIFT, + .divn_width = PLL_BASE_DIVN_WIDTH, + .divm_shift = PLL_BASE_DIVM_SHIFT, + .divm_width = PLL_BASE_DIVM_WIDTH, + .divp_shift = PLL_BASE_DIVP_SHIFT, + .divp_width = PLL_BASE_DIVP_WIDTH, }; -#endif static void clk_pll_enable_lock(struct tegra_clk_pll *pll) { @@ -297,6 +286,39 @@ static void clk_pll_disable(struct clk_hw *hw) spin_unlock_irqrestore(pll->lock, flags); } +static int _p_div_to_hw(struct clk_hw *hw, u8 p_div) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; + + if (p_tohw) { + while (p_tohw->pdiv) { + if (p_div <= p_tohw->pdiv) + return p_tohw->hw_val; + p_tohw++; + } + return -EINVAL; + } + return -EINVAL; +} + +static int _hw_to_p_div(struct clk_hw *hw, u8 p_div_hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; + + if (p_tohw) { + while (p_tohw->pdiv) { + if (p_div_hw == p_tohw->hw_val) + return p_tohw->pdiv; + p_tohw++; + } + return -EINVAL; + } + + return 1 << p_div_hw; +} + static int _get_table_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, unsigned long rate, unsigned long parent_rate) @@ -326,9 +348,9 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - struct pdiv_map *p_tohw = pll->params->pdiv_tohw; unsigned long cfreq; u32 p_div = 0; + int ret; switch (parent_rate) { case 12000000: @@ -369,20 +391,16 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, || cfg->output_rate > pll->params->vco_max) { pr_err("%s: Failed to set %s rate %lu\n", __func__, __clk_get_name(hw->clk), rate); + WARN_ON(1); return -EINVAL; } - if (p_tohw) { - p_div = 1 << p_div; - while (p_tohw->pdiv) { - if (p_div <= p_tohw->pdiv) { - cfg->p = p_tohw->hw_val; - break; - } - p_tohw++; - } - if (!p_tohw->pdiv) - return -EINVAL; + if (pll->params->pdiv_tohw) { + ret = _p_div_to_hw(hw, 1 << p_div); + if (ret < 0) + return ret; + else + cfg->p = ret; } else cfg->p = p_div; @@ -393,29 +411,61 @@ static void _update_pll_mnp(struct tegra_clk_pll *pll, struct tegra_clk_pll_freq_table *cfg) { u32 val; + struct tegra_clk_pll_params *params = pll->params; + struct div_nmp *div_nmp = params->div_nmp; + + if ((pll->flags & TEGRA_PLLM) && + (pll_override_readl(PMC_PLLP_WB0_OVERRIDE, pll) & + PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)) { + val = pll_override_readl(params->pmc_divp_reg, pll); + val &= ~(divp_mask(pll) << div_nmp->override_divp_shift); + val |= cfg->p << div_nmp->override_divp_shift; + pll_override_writel(val, params->pmc_divp_reg, pll); + + val = pll_override_readl(params->pmc_divnm_reg, pll); + val &= ~(divm_mask(pll) << div_nmp->override_divm_shift) | + ~(divn_mask(pll) << div_nmp->override_divn_shift); + val |= (cfg->m << div_nmp->override_divm_shift) | + (cfg->n << div_nmp->override_divn_shift); + pll_override_writel(val, params->pmc_divnm_reg, pll); + } else { + val = pll_readl_base(pll); - val = pll_readl_base(pll); + val &= ~((divm_mask(pll) << div_nmp->divm_shift) | + (divn_mask(pll) << div_nmp->divn_shift) | + (divp_mask(pll) << div_nmp->divp_shift)); - val &= ~((divm_mask(pll) << pll->divm_shift) | - (divn_mask(pll) << pll->divn_shift) | - (divp_mask(pll) << pll->divp_shift)); - val |= ((cfg->m << pll->divm_shift) | - (cfg->n << pll->divn_shift) | - (cfg->p << pll->divp_shift)); + val |= ((cfg->m << div_nmp->divm_shift) | + (cfg->n << div_nmp->divn_shift) | + (cfg->p << div_nmp->divp_shift)); - pll_writel_base(val, pll); + pll_writel_base(val, pll); + } } static void _get_pll_mnp(struct tegra_clk_pll *pll, struct tegra_clk_pll_freq_table *cfg) { u32 val; + struct tegra_clk_pll_params *params = pll->params; + struct div_nmp *div_nmp = params->div_nmp; + + if ((pll->flags & TEGRA_PLLM) && + (pll_override_readl(PMC_PLLP_WB0_OVERRIDE, pll) & + PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)) { + val = pll_override_readl(params->pmc_divp_reg, pll); + cfg->p = (val >> div_nmp->override_divp_shift) & divp_mask(pll); + + val = pll_override_readl(params->pmc_divnm_reg, pll); + cfg->m = (val >> div_nmp->override_divm_shift) & divm_mask(pll); + cfg->n = (val >> div_nmp->override_divn_shift) & divn_mask(pll); + } else { + val = pll_readl_base(pll); - val = pll_readl_base(pll); - - cfg->m = (val >> pll->divm_shift) & (divm_mask(pll)); - cfg->n = (val >> pll->divn_shift) & (divn_mask(pll)); - cfg->p = (val >> pll->divp_shift) & (divp_mask(pll)); + cfg->m = (val >> div_nmp->divm_shift) & divm_mask(pll); + cfg->n = (val >> div_nmp->divn_shift) & divn_mask(pll); + cfg->p = (val >> div_nmp->divp_shift) & divp_mask(pll); + } } static void _update_pll_cpcon(struct tegra_clk_pll *pll, @@ -485,9 +535,10 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, } if (_get_table_rate(hw, &cfg, rate, parent_rate) && - _calc_rate(hw, &cfg, rate, parent_rate)) + _calc_rate(hw, &cfg, rate, parent_rate)) { + WARN_ON(1); return -EINVAL; - + } if (pll->lock) spin_lock_irqsave(pll->lock, flags); @@ -507,7 +558,6 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, { struct tegra_clk_pll *pll = to_clk_pll(hw); struct tegra_clk_pll_freq_table cfg; - u64 output_rate = *prate; if (pll->flags & TEGRA_PLL_FIXED) return pll->fixed_rate; @@ -517,13 +567,12 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, return __clk_get_rate(hw->clk); if (_get_table_rate(hw, &cfg, rate, *prate) && - _calc_rate(hw, &cfg, rate, *prate)) + _calc_rate(hw, &cfg, rate, *prate)) { + WARN_ON(1); return -EINVAL; + } - output_rate *= cfg.n; - do_div(output_rate, cfg.m * (1 << cfg.p)); - - return output_rate; + return cfg.output_rate; } static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, @@ -531,7 +580,6 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, { struct tegra_clk_pll *pll = to_clk_pll(hw); struct tegra_clk_pll_freq_table cfg; - struct pdiv_map *p_tohw = pll->params->pdiv_tohw; u32 val; u64 rate = parent_rate; int pdiv; @@ -553,21 +601,11 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, _get_pll_mnp(pll, &cfg); - if (p_tohw) { - while (p_tohw->pdiv) { - if (cfg.p == p_tohw->hw_val) { - pdiv = p_tohw->pdiv; - break; - } - p_tohw++; - } - - if (!p_tohw->pdiv) { - WARN_ON(1); - pdiv = 1; - } - } else - pdiv = 1 << cfg.p; + pdiv = _hw_to_p_div(hw, cfg.p); + if (pdiv < 0) { + WARN_ON(1); + pdiv = 1; + } cfg.m *= pdiv; @@ -647,9 +685,9 @@ static int clk_plle_enable(struct clk_hw *hw) val = pll_readl_base(pll); val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll)); val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT); - val |= sel.m << pll->divm_shift; - val |= sel.n << pll->divn_shift; - val |= sel.p << pll->divp_shift; + val |= sel.m << pll->params->div_nmp->divm_shift; + val |= sel.n << pll->params->div_nmp->divn_shift; + val |= sel.p << pll->params->div_nmp->divp_shift; val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT; pll_writel_base(val, pll); } @@ -680,9 +718,9 @@ static unsigned long clk_plle_recalc_rate(struct clk_hw *hw, u32 divn = 0, divm = 0, divp = 0; u64 rate = parent_rate; - divp = (val >> pll->divp_shift) & (divp_mask(pll)); - divn = (val >> pll->divn_shift) & (divn_mask(pll)); - divm = (val >> pll->divm_shift) & (divm_mask(pll)); + divp = (val >> pll->params->div_nmp->divp_shift) & (divp_mask(pll)); + divn = (val >> pll->params->div_nmp->divn_shift) & (divn_mask(pll)); + divm = (val >> pll->params->div_nmp->divm_shift) & (divm_mask(pll)); divm *= divp; rate *= divn; @@ -769,16 +807,22 @@ static int _calc_dynamic_ramp_rate(struct clk_hw *hw, { struct tegra_clk_pll *pll = to_clk_pll(hw); unsigned int p; + int p_div; if (!rate) return -EINVAL; p = DIV_ROUND_UP(pll->params->vco_min, rate); cfg->m = _pll_fixed_mdiv(pll->params, parent_rate); - cfg->p = p; - cfg->output_rate = rate * cfg->p; + cfg->output_rate = rate * p; cfg->n = cfg->output_rate * cfg->m / parent_rate; + p_div = _p_div_to_hw(hw, p); + if (p_div < 0) + return p_div; + else + cfg->p = p_div; + if (cfg->n > divn_max(pll) || cfg->output_rate > pll->params->vco_max) return -EINVAL; @@ -790,18 +834,25 @@ static int _pll_ramp_calc_pll(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - int err = 0; + int err = 0, p_div; err = _get_table_rate(hw, cfg, rate, parent_rate); if (err < 0) err = _calc_dynamic_ramp_rate(hw, cfg, rate, parent_rate); - else if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) { + else { + if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) { WARN_ON(1); err = -EINVAL; goto out; + } + p_div = _p_div_to_hw(hw, cfg->p); + if (p_div < 0) + return p_div; + else + cfg->p = p_div; } - if (!cfg->p || (cfg->p > pll->params->max_p)) + if (cfg->p > pll->params->max_p) err = -EINVAL; out: @@ -815,7 +866,6 @@ static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate, struct tegra_clk_pll_freq_table cfg, old_cfg; unsigned long flags = 0; int ret = 0; - u8 old_p; ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); if (ret < 0) @@ -826,11 +876,8 @@ static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate, _get_pll_mnp(pll, &old_cfg); - old_p = pllxc_p[old_cfg.p]; - if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_p != cfg.p) { - cfg.p -= 1; + if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p) ret = _program_pll(hw, &cfg, rate); - } if (pll->lock) spin_unlock_irqrestore(pll->lock, flags); @@ -842,15 +889,19 @@ static long clk_pll_ramp_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { struct tegra_clk_pll_freq_table cfg; - int ret = 0; + int ret = 0, p_div; u64 output_rate = *prate; ret = _pll_ramp_calc_pll(hw, &cfg, rate, *prate); if (ret < 0) return ret; + p_div = _hw_to_p_div(hw, cfg.p); + if (p_div < 0) + return p_div; + output_rate *= cfg.n; - do_div(output_rate, cfg.m * cfg.p); + do_div(output_rate, cfg.m * p_div); return output_rate; } @@ -862,7 +913,6 @@ static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate, struct tegra_clk_pll *pll = to_clk_pll(hw); unsigned long flags = 0; int state, ret = 0; - u32 val; if (pll->lock) spin_lock_irqsave(pll->lock, flags); @@ -881,22 +931,7 @@ static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate, if (ret < 0) goto out; - cfg.p -= 1; - - val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); - if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) { - val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); - val = cfg.p ? (val | PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK) : - (val & ~PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK); - writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); - - val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); - val &= ~(divn_mask(pll) | divm_mask(pll)); - val |= (cfg.m << pll->divm_shift) | (cfg.n << pll->divn_shift); - writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE); - } else - _update_pll_mnp(pll, &cfg); - + _update_pll_mnp(pll, &cfg); out: if (pll->lock) @@ -1010,13 +1045,10 @@ static int _pllcx_update_dynamic_coef(struct tegra_clk_pll *pll, static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { - struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll_freq_table cfg, old_cfg; struct tegra_clk_pll *pll = to_clk_pll(hw); unsigned long flags = 0; int state, ret = 0; - u32 val; - u16 old_m, old_n; - u8 old_p; if (pll->lock) spin_lock_irqsave(pll->lock, flags); @@ -1025,21 +1057,16 @@ static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate, if (ret < 0) goto out; - val = pll_readl_base(pll); - old_m = (val >> pll->divm_shift) & (divm_mask(pll)); - old_n = (val >> pll->divn_shift) & (divn_mask(pll)); - old_p = pllcx_p[(val >> pll->divp_shift) & (divp_mask(pll))]; + _get_pll_mnp(pll, &old_cfg); - if (cfg.m != old_m) { + if (cfg.m != old_cfg.m) { WARN_ON(1); goto out; } - if (old_n == cfg.n && old_p == cfg.p) + if (old_cfg.n == cfg.n && old_cfg.p == cfg.p) goto out; - cfg.p -= 1; - state = clk_pll_is_enabled(hw); if (state) _clk_pllc_disable(hw); @@ -1178,8 +1205,8 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) val = pll_readl_base(pll); val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll)); val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT); - val |= sel.m << pll->divm_shift; - val |= sel.n << pll->divn_shift; + val |= sel.m << pll->params->div_nmp->divm_shift; + val |= sel.n << pll->params->div_nmp->divn_shift; val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT; pll_writel_base(val, pll); udelay(1); @@ -1240,12 +1267,8 @@ static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base, pll->flags = pll_flags; pll->lock = lock; - pll->divp_shift = PLL_BASE_DIVP_SHIFT; - pll->divp_width = PLL_BASE_DIVP_WIDTH; - pll->divn_shift = PLL_BASE_DIVN_SHIFT; - pll->divn_width = PLL_BASE_DIVN_WIDTH; - pll->divm_shift = PLL_BASE_DIVM_SHIFT; - pll->divm_width = PLL_BASE_DIVM_WIDTH; + if (!pll_params->div_nmp) + pll_params->div_nmp = &default_nmp; return pll; } @@ -1401,7 +1424,7 @@ struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, struct tegra_clk_pll *pll; struct clk *clk; - pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_LOCK_MISC; pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, freq_table, lock); if (IS_ERR(pll)) @@ -1428,7 +1451,6 @@ struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, val &= ~BIT(29); pll_writel_misc(val, pll); - pll_flags |= TEGRA_PLL_LOCK_MISC; clk = _tegra_clk_register_pll(pll, name, parent_name, flags, &tegra_clk_pllre_ops); if (IS_ERR(clk)) @@ -1453,6 +1475,7 @@ struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, pll_flags |= TEGRA_PLL_BYPASS; pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll_flags |= TEGRA_PLLM; pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, freq_table, lock); if (IS_ERR(pll)) diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 40d939d..b6015cb 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -21,6 +21,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/delay.h> +#include <linux/export.h> #include <linux/clk/tegra.h> #include "clk.h" @@ -28,6 +29,7 @@ #define RST_DEVICES_L 0x004 #define RST_DEVICES_H 0x008 #define RST_DEVICES_U 0x00C +#define RST_DFLL_DVCO 0x2F4 #define RST_DEVICES_V 0x358 #define RST_DEVICES_W 0x35C #define RST_DEVICES_X 0x28C @@ -41,8 +43,36 @@ #define RST_DEVICES_CLR_V 0x434 #define RST_DEVICES_SET_W 0x438 #define RST_DEVICES_CLR_W 0x43c +#define CPU_FINETRIM_SELECT 0x4d4 /* override default prop dlys */ +#define CPU_FINETRIM_DR 0x4d8 /* rise->rise prop dly A */ +#define CPU_FINETRIM_R 0x4e4 /* rise->rise prop dly inc A */ #define RST_DEVICES_NUM 5 +/* RST_DFLL_DVCO bitfields */ +#define DVFS_DFLL_RESET_SHIFT 0 + +/* CPU_FINETRIM_SELECT and CPU_FINETRIM_DR bitfields */ +#define CPU_FINETRIM_1_FCPU_1 BIT(0) /* fcpu0 */ +#define CPU_FINETRIM_1_FCPU_2 BIT(1) /* fcpu1 */ +#define CPU_FINETRIM_1_FCPU_3 BIT(2) /* fcpu2 */ +#define CPU_FINETRIM_1_FCPU_4 BIT(3) /* fcpu3 */ +#define CPU_FINETRIM_1_FCPU_5 BIT(4) /* fl2 */ +#define CPU_FINETRIM_1_FCPU_6 BIT(5) /* ftop */ + +/* CPU_FINETRIM_R bitfields */ +#define CPU_FINETRIM_R_FCPU_1_SHIFT 0 /* fcpu0 */ +#define CPU_FINETRIM_R_FCPU_1_MASK (0x3 << CPU_FINETRIM_R_FCPU_1_SHIFT) +#define CPU_FINETRIM_R_FCPU_2_SHIFT 2 /* fcpu1 */ +#define CPU_FINETRIM_R_FCPU_2_MASK (0x3 << CPU_FINETRIM_R_FCPU_2_SHIFT) +#define CPU_FINETRIM_R_FCPU_3_SHIFT 4 /* fcpu2 */ +#define CPU_FINETRIM_R_FCPU_3_MASK (0x3 << CPU_FINETRIM_R_FCPU_3_SHIFT) +#define CPU_FINETRIM_R_FCPU_4_SHIFT 6 /* fcpu3 */ +#define CPU_FINETRIM_R_FCPU_4_MASK (0x3 << CPU_FINETRIM_R_FCPU_4_SHIFT) +#define CPU_FINETRIM_R_FCPU_5_SHIFT 8 /* fl2 */ +#define CPU_FINETRIM_R_FCPU_5_MASK (0x3 << CPU_FINETRIM_R_FCPU_5_SHIFT) +#define CPU_FINETRIM_R_FCPU_6_SHIFT 10 /* ftop */ +#define CPU_FINETRIM_R_FCPU_6_MASK (0x3 << CPU_FINETRIM_R_FCPU_6_SHIFT) + #define CLK_OUT_ENB_L 0x010 #define CLK_OUT_ENB_H 0x014 #define CLK_OUT_ENB_U 0x018 @@ -127,6 +157,7 @@ #define PMC_DPD_PADS_ORIDE_BLINK_ENB 20 #define PMC_CTRL 0 #define PMC_CTRL_BLINK_ENB 7 +#define PMC_BLINK_TIMER 0x40 #define OSC_CTRL 0x50 #define OSC_CTRL_OSC_FREQ_SHIFT 28 @@ -242,6 +273,8 @@ #define CLK_SOURCE_I2CSLOW 0x3fc #define CLK_SOURCE_SE 0x42c #define CLK_SOURCE_MSELECT 0x3b4 +#define CLK_SOURCE_DFLL_REF 0x62c +#define CLK_SOURCE_DFLL_SOC 0x630 #define CLK_SOURCE_SOC_THERM 0x644 #define CLK_SOURCE_XUSB_HOST_SRC 0x600 #define CLK_SOURCE_XUSB_FALCON_SRC 0x604 @@ -250,6 +283,10 @@ #define CLK_SOURCE_XUSB_DEV_SRC 0x60c #define CLK_SOURCE_EMC 0x19c +/* PLLM override registers */ +#define PMC_PLLM_WB0_OVERRIDE 0x1dc +#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 + /* Tegra CPU clock and reset control regs */ #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 @@ -267,6 +304,15 @@ static DEFINE_SPINLOCK(clk_doubler_lock); static DEFINE_SPINLOCK(clk_out_lock); static DEFINE_SPINLOCK(sysrate_lock); +static struct div_nmp pllxc_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 20, + .divp_width = 4, +}; + static struct pdiv_map pllxc_p[] = { { .pdiv = 1, .hw_val = 0 }, { .pdiv = 2, .hw_val = 1 }, @@ -315,6 +361,16 @@ static struct tegra_clk_pll_params pll_c_params = { .stepa_shift = 17, .stepb_shift = 9, .pdiv_tohw = pllxc_p, + .div_nmp = &pllxc_nmp, +}; + +static struct div_nmp pllcx_nmp = { + .divm_shift = 0, + .divm_width = 2, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 20, + .divp_width = 3, }; static struct pdiv_map pllc_p[] = { @@ -348,6 +404,8 @@ static struct tegra_clk_pll_params pll_c2_params = { .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, .pdiv_tohw = pllc_p, + .div_nmp = &pllcx_nmp, + .max_p = 7, .ext_misc_reg[0] = 0x4f0, .ext_misc_reg[1] = 0x4f4, .ext_misc_reg[2] = 0x4f8, @@ -366,11 +424,25 @@ static struct tegra_clk_pll_params pll_c3_params = { .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, .pdiv_tohw = pllc_p, + .div_nmp = &pllcx_nmp, + .max_p = 7, .ext_misc_reg[0] = 0x504, .ext_misc_reg[1] = 0x508, .ext_misc_reg[2] = 0x50c, }; +static struct div_nmp pllm_nmp = { + .divm_shift = 0, + .divm_width = 8, + .override_divm_shift = 0, + .divn_shift = 8, + .divn_width = 8, + .override_divn_shift = 8, + .divp_shift = 20, + .divp_width = 1, + .override_divp_shift = 27, +}; + static struct pdiv_map pllm_p[] = { { .pdiv = 1, .hw_val = 0 }, { .pdiv = 2, .hw_val = 1 }, @@ -400,6 +472,18 @@ static struct tegra_clk_pll_params pll_m_params = { .lock_delay = 300, .max_p = 2, .pdiv_tohw = pllm_p, + .div_nmp = &pllm_nmp, + .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE, + .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2, +}; + +static struct div_nmp pllp_nmp = { + .divm_shift = 0, + .divm_width = 5, + .divn_shift = 8, + .divn_width = 10, + .divp_shift = 20, + .divp_width = 3, }; static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { @@ -423,6 +507,7 @@ static struct tegra_clk_pll_params pll_p_params = { .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, + .div_nmp = &pllp_nmp, }; static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { @@ -449,6 +534,7 @@ static struct tegra_clk_pll_params pll_a_params = { .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, + .div_nmp = &pllp_nmp, }; static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { @@ -484,6 +570,7 @@ static struct tegra_clk_pll_params pll_d_params = { .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .div_nmp = &pllp_nmp, }; static struct tegra_clk_pll_params pll_d2_params = { @@ -498,6 +585,7 @@ static struct tegra_clk_pll_params pll_d2_params = { .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .div_nmp = &pllp_nmp, }; static struct pdiv_map pllu_p[] = { @@ -506,6 +594,15 @@ static struct pdiv_map pllu_p[] = { { .pdiv = 0, .hw_val = 0 }, }; +static struct div_nmp pllu_nmp = { + .divm_shift = 0, + .divm_width = 5, + .divn_shift = 8, + .divn_width = 10, + .divp_shift = 20, + .divp_width = 1, +}; + static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { {12000000, 480000000, 960, 12, 0, 12}, {13000000, 480000000, 960, 13, 0, 12}, @@ -528,6 +625,7 @@ static struct tegra_clk_pll_params pll_u_params = { .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, .pdiv_tohw = pllu_p, + .div_nmp = &pllu_nmp, }; static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { @@ -560,6 +658,7 @@ static struct tegra_clk_pll_params pll_x_params = { .stepa_shift = 16, .stepb_shift = 24, .pdiv_tohw = pllxc_p, + .div_nmp = &pllxc_nmp, }; static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { @@ -569,6 +668,15 @@ static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { {0, 0, 0, 0, 0, 0}, }; +static struct div_nmp plle_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 24, + .divp_width = 4, +}; + static struct tegra_clk_pll_params pll_e_params = { .input_min = 12000000, .input_max = 1000000000, @@ -582,6 +690,16 @@ static struct tegra_clk_pll_params pll_e_params = { .lock_mask = PLLE_MISC_LOCK, .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, .lock_delay = 300, + .div_nmp = &plle_nmp, +}; + +static struct div_nmp pllre_nmp = { + .divm_shift = 0, + .divm_width = 8, + .divn_shift = 8, + .divn_width = 8, + .divp_shift = 16, + .divp_width = 4, }; static struct tegra_clk_pll_params pll_re_vco_params = { @@ -598,6 +716,7 @@ static struct tegra_clk_pll_params pll_re_vco_params = { .lock_delay = 300, .iddq_reg = PLLRE_MISC, .iddq_bit_idx = PLLRE_IDDQ_BIT, + .div_nmp = &pllre_nmp, }; /* Peripheral clock registers */ @@ -765,6 +884,7 @@ enum tegra114_clk { audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3, blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src, xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp, + dfll_ref = 264, dfll_soc, /* Mux clocks */ @@ -1202,8 +1322,8 @@ static void __init tegra114_pll_init(void __iomem *clk_base, /* PLLP_OUT2 */ clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p", clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED | - TEGRA_DIVIDER_ROUND_UP, 24, 8, 1, - &pll_div_lock); + TEGRA_DIVIDER_ROUND_UP | TEGRA_DIVIDER_INT, 24, + 8, 1, &pll_div_lock); clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div", clk_base + PLLP_OUTA, 17, 16, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, @@ -1605,7 +1725,7 @@ static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) /* clk_out_2 */ clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents, - ARRAY_SIZE(clk_out1_parents), 0, + ARRAY_SIZE(clk_out2_parents), 0, pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0, &clk_out_lock); clks[clk_out_2_mux] = clk; @@ -1617,7 +1737,7 @@ static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) /* clk_out_3 */ clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents, - ARRAY_SIZE(clk_out1_parents), 0, + ARRAY_SIZE(clk_out3_parents), 0, pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0, &clk_out_lock); clks[clk_out_3_mux] = clk; @@ -1628,6 +1748,8 @@ static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) clks[clk_out_3] = clk; /* blink */ + /* clear the blink timer register to directly output clk_32k */ + writel_relaxed(0, pmc_base + PMC_BLINK_TIMER); clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0, pmc_base + PMC_DPD_PADS_ORIDE, PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL); @@ -1640,7 +1762,7 @@ static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) } static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", - "pll_p_out3", "pll_p_out2", "unused", + "pll_p", "pll_p_out2", "unused", "clk_32k", "pll_m_out1" }; static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", @@ -1750,7 +1872,7 @@ static struct tegra_periph_init_data tegra_periph_clk_list[] = { TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor), TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi), TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp), - TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_h_regs, TEGRA_PERIPH_WAR_1005168, msenc), + TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_u_regs, TEGRA_PERIPH_WAR_1005168, msenc), TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec), TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x), TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi), @@ -1767,6 +1889,8 @@ static struct tegra_periph_init_data tegra_periph_clk_list[] = { TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow), TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se), TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED), + TEGRA_INIT_DATA_MUX("dfll_ref", "ref", "t114_dfll", mux_pllp_clkm, CLK_SOURCE_DFLL_REF, 155, &periph_w_regs, TEGRA_PERIPH_ON_APB, dfll_ref), + TEGRA_INIT_DATA_MUX("dfll_soc", "soc", "t114_dfll", mux_pllp_clkm, CLK_SOURCE_DFLL_SOC, 155, &periph_w_regs, TEGRA_PERIPH_ON_APB, dfll_soc), TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm), TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src), TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src), @@ -2028,6 +2152,10 @@ static const struct of_device_id pmc_match[] __initconst = { {}, }; +/* + * dfll_soc/dfll_ref apparently must be kept enabled, otherwise I2C5 + * breaks + */ static __initdata struct tegra_clk_init_table init_table[] = { {uarta, pll_p, 408000000, 0}, {uartb, pll_p, 408000000, 0}, @@ -2043,6 +2171,8 @@ static __initdata struct tegra_clk_init_table init_table[] = { {i2s2, pll_a_out0, 11289600, 0}, {i2s3, pll_a_out0, 11289600, 0}, {i2s4, pll_a_out0, 11289600, 0}, + {dfll_soc, pll_p, 51000000, 1}, + {dfll_ref, pll_p, 51000000, 1}, {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */ }; @@ -2051,7 +2181,132 @@ static void __init tegra114_clock_apply_init_table(void) tegra_init_from_table(init_table, clks, clk_max); } -void __init tegra114_clock_init(struct device_node *np) + +/** + * tegra114_car_barrier - wait for pending writes to the CAR to complete + * + * Wait for any outstanding writes to the CAR MMIO space from this CPU + * to complete before continuing execution. No return value. + */ +static void tegra114_car_barrier(void) +{ + wmb(); /* probably unnecessary */ + readl_relaxed(clk_base + CPU_FINETRIM_SELECT); +} + +/** + * tegra114_clock_tune_cpu_trimmers_high - use high-voltage propagation delays + * + * When the CPU rail voltage is in the high-voltage range, use the + * built-in hardwired clock propagation delays in the CPU clock + * shaper. No return value. + */ +void tegra114_clock_tune_cpu_trimmers_high(void) +{ + u32 select = 0; + + /* Use hardwired rise->rise & fall->fall clock propagation delays */ + select |= ~(CPU_FINETRIM_1_FCPU_1 | CPU_FINETRIM_1_FCPU_2 | + CPU_FINETRIM_1_FCPU_3 | CPU_FINETRIM_1_FCPU_4 | + CPU_FINETRIM_1_FCPU_5 | CPU_FINETRIM_1_FCPU_6); + writel_relaxed(select, clk_base + CPU_FINETRIM_SELECT); + + tegra114_car_barrier(); +} +EXPORT_SYMBOL(tegra114_clock_tune_cpu_trimmers_high); + +/** + * tegra114_clock_tune_cpu_trimmers_low - use low-voltage propagation delays + * + * When the CPU rail voltage is in the low-voltage range, use the + * extended clock propagation delays set by + * tegra114_clock_tune_cpu_trimmers_init(). The intention is to + * maintain the input clock duty cycle that the FCPU subsystem + * expects. No return value. + */ +void tegra114_clock_tune_cpu_trimmers_low(void) +{ + u32 select = 0; + + /* + * Use software-specified rise->rise & fall->fall clock + * propagation delays (from + * tegra114_clock_tune_cpu_trimmers_init() + */ + select |= (CPU_FINETRIM_1_FCPU_1 | CPU_FINETRIM_1_FCPU_2 | + CPU_FINETRIM_1_FCPU_3 | CPU_FINETRIM_1_FCPU_4 | + CPU_FINETRIM_1_FCPU_5 | CPU_FINETRIM_1_FCPU_6); + writel_relaxed(select, clk_base + CPU_FINETRIM_SELECT); + + tegra114_car_barrier(); +} +EXPORT_SYMBOL(tegra114_clock_tune_cpu_trimmers_low); + +/** + * tegra114_clock_tune_cpu_trimmers_init - set up and enable clk prop delays + * + * Program extended clock propagation delays into the FCPU clock + * shaper and enable them. XXX Define the purpose - peak current + * reduction? No return value. + */ +/* XXX Initial voltage rail state assumption issues? */ +void tegra114_clock_tune_cpu_trimmers_init(void) +{ + u32 dr = 0, r = 0; + + /* Increment the rise->rise clock delay by four steps */ + r |= (CPU_FINETRIM_R_FCPU_1_MASK | CPU_FINETRIM_R_FCPU_2_MASK | + CPU_FINETRIM_R_FCPU_3_MASK | CPU_FINETRIM_R_FCPU_4_MASK | + CPU_FINETRIM_R_FCPU_5_MASK | CPU_FINETRIM_R_FCPU_6_MASK); + writel_relaxed(r, clk_base + CPU_FINETRIM_R); + + /* + * Use the rise->rise clock propagation delay specified in the + * r field + */ + dr |= (CPU_FINETRIM_1_FCPU_1 | CPU_FINETRIM_1_FCPU_2 | + CPU_FINETRIM_1_FCPU_3 | CPU_FINETRIM_1_FCPU_4 | + CPU_FINETRIM_1_FCPU_5 | CPU_FINETRIM_1_FCPU_6); + writel_relaxed(dr, clk_base + CPU_FINETRIM_DR); + + tegra114_clock_tune_cpu_trimmers_low(); +} +EXPORT_SYMBOL(tegra114_clock_tune_cpu_trimmers_init); + +/** + * tegra114_clock_assert_dfll_dvco_reset - assert the DFLL's DVCO reset + * + * Assert the reset line of the DFLL's DVCO. No return value. + */ +void tegra114_clock_assert_dfll_dvco_reset(void) +{ + u32 v; + + v = readl_relaxed(clk_base + RST_DFLL_DVCO); + v |= (1 << DVFS_DFLL_RESET_SHIFT); + writel_relaxed(v, clk_base + RST_DFLL_DVCO); + tegra114_car_barrier(); +} +EXPORT_SYMBOL(tegra114_clock_assert_dfll_dvco_reset); + +/** + * tegra114_clock_deassert_dfll_dvco_reset - deassert the DFLL's DVCO reset + * + * Deassert the reset line of the DFLL's DVCO, allowing the DVCO to + * operate. No return value. + */ +void tegra114_clock_deassert_dfll_dvco_reset(void) +{ + u32 v; + + v = readl_relaxed(clk_base + RST_DFLL_DVCO); + v &= ~(1 << DVFS_DFLL_RESET_SHIFT); + writel_relaxed(v, clk_base + RST_DFLL_DVCO); + tegra114_car_barrier(); +} +EXPORT_SYMBOL(tegra114_clock_deassert_dfll_dvco_reset); + +static void __init tegra114_clock_init(struct device_node *np) { struct device_node *node; int i; @@ -2104,3 +2359,4 @@ void __init tegra114_clock_init(struct device_node *np) tegra_cpu_car_ops = &tegra114_cpu_car_ops; } +CLK_OF_DECLARE(tegra114, "nvidia,tegra114-car", tegra114_clock_init); diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 075db0c..759ca47 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -1287,7 +1287,7 @@ static const struct of_device_id pmc_match[] __initconst = { {}, }; -void __init tegra20_clock_init(struct device_node *np) +static void __init tegra20_clock_init(struct device_node *np) { int i; struct device_node *node; @@ -1339,3 +1339,4 @@ void __init tegra20_clock_init(struct device_node *np) tegra_cpu_car_ops = &tegra20_cpu_car_ops; } +CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index ba99e38..e2c6ca0 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -252,6 +252,9 @@ #define CLK_RESET_CCLK_RUN_POLICY 2 #define CLK_RESET_CCLK_BURST_POLICY_PLLX 8 +/* PLLM override registers */ +#define PMC_PLLM_WB0_OVERRIDE 0x1dc + #ifdef CONFIG_PM_SLEEP static struct cpu_clk_suspend_context { u32 pllx_misc; @@ -563,6 +566,18 @@ static struct tegra_clk_pll_params pll_c_params = { .lock_delay = 300, }; +static struct div_nmp pllm_nmp = { + .divn_shift = 8, + .divn_width = 10, + .override_divn_shift = 5, + .divm_shift = 0, + .divm_width = 5, + .override_divm_shift = 0, + .divp_shift = 20, + .divp_width = 3, + .override_divp_shift = 15, +}; + static struct tegra_clk_pll_params pll_m_params = { .input_min = 2000000, .input_max = 31000000, @@ -575,6 +590,9 @@ static struct tegra_clk_pll_params pll_m_params = { .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, + .div_nmp = &pllm_nmp, + .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE, + .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE, }; static struct tegra_clk_pll_params pll_p_params = { @@ -1223,7 +1241,7 @@ static void __init tegra30_pmc_clk_init(void) /* clk_out_2 */ clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents, - ARRAY_SIZE(clk_out1_parents), 0, + ARRAY_SIZE(clk_out2_parents), 0, pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0, &clk_out_lock); clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0, @@ -1234,7 +1252,7 @@ static void __init tegra30_pmc_clk_init(void) /* clk_out_3 */ clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents, - ARRAY_SIZE(clk_out1_parents), 0, + ARRAY_SIZE(clk_out3_parents), 0, pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0, &clk_out_lock); clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0, @@ -1954,7 +1972,7 @@ static const struct of_device_id pmc_match[] __initconst = { {}, }; -void __init tegra30_clock_init(struct device_node *np) +static void __init tegra30_clock_init(struct device_node *np) { struct device_node *node; int i; @@ -2005,3 +2023,4 @@ void __init tegra30_clock_init(struct device_node *np) tegra_cpu_car_ops = &tegra30_cpu_car_ops; } +CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init); diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index 923ca7e..86581ac 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -74,18 +74,6 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, } } -static const struct of_device_id tegra_dt_clk_match[] = { - { .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init }, - { .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init }, - { .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init }, - { } -}; - -void __init tegra_clocks_init(void) -{ - of_clk_init(tegra_dt_clk_match); -} - tegra_clk_apply_init_table_func tegra_clk_apply_init_table; void __init tegra_clocks_apply_init_table(void) diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index e056562..07cfacd 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -128,6 +128,31 @@ struct pdiv_map { }; /** + * struct div_nmp - offset and width of m,n and p fields + * + * @divn_shift: shift to the feedback divider bit field + * @divn_width: width of the feedback divider bit field + * @divm_shift: shift to the input divider bit field + * @divm_width: width of the input divider bit field + * @divp_shift: shift to the post divider bit field + * @divp_width: width of the post divider bit field + * @override_divn_shift: shift to the feedback divider bitfield in override reg + * @override_divm_shift: shift to the input divider bitfield in override reg + * @override_divp_shift: shift to the post divider bitfield in override reg + */ +struct div_nmp { + u8 divn_shift; + u8 divn_width; + u8 divm_shift; + u8 divm_width; + u8 divp_shift; + u8 divp_width; + u8 override_divn_shift; + u8 override_divm_shift; + u8 override_divp_shift; +}; + +/** * struct clk_pll_params - PLL parameters * * @input_min: Minimum input frequency @@ -161,11 +186,14 @@ struct tegra_clk_pll_params { u32 aux_reg; u32 dyn_ramp_reg; u32 ext_misc_reg[3]; + u32 pmc_divnm_reg; + u32 pmc_divp_reg; int stepa_shift; int stepb_shift; int lock_delay; int max_p; struct pdiv_map *pdiv_tohw; + struct div_nmp *div_nmp; }; /** @@ -179,12 +207,6 @@ struct tegra_clk_pll_params { * @flags: PLL flags * @fixed_rate: PLL rate if it is fixed * @lock: register lock - * @divn_shift: shift to the feedback divider bit field - * @divn_width: width of the feedback divider bit field - * @divm_shift: shift to the input divider bit field - * @divm_width: width of the input divider bit field - * @divp_shift: shift to the post divider bit field - * @divp_width: width of the post divider bit field * * Flags: * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for @@ -214,12 +236,6 @@ struct tegra_clk_pll { u32 flags; unsigned long fixed_rate; spinlock_t *lock; - u8 divn_shift; - u8 divn_width; - u8 divm_shift; - u8 divm_width; - u8 divp_shift; - u8 divp_width; struct tegra_clk_pll_freq_table *freq_table; struct tegra_clk_pll_params *params; }; @@ -571,23 +587,11 @@ void tegra_init_from_table(struct tegra_clk_init_table *tbl, void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, struct clk *clks[], int clk_max); -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void tegra20_clock_init(struct device_node *np); -#else -static inline void tegra20_clock_init(struct device_node *np) {} -#endif /* CONFIG_ARCH_TEGRA_2x_SOC */ - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -void tegra30_clock_init(struct device_node *np); -#else -static inline void tegra30_clock_init(struct device_node *np) {} -#endif /* CONFIG_ARCH_TEGRA_3x_SOC */ - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -void tegra114_clock_init(struct device_node *np); -#else -static inline void tegra114_clock_init(struct device_node *np) {} -#endif /* CONFIG_ARCH_TEGRA114_SOC */ +void tegra114_clock_tune_cpu_trimmers_high(void); +void tegra114_clock_tune_cpu_trimmers_low(void); +void tegra114_clock_tune_cpu_trimmers_init(void); +void tegra114_clock_assert_dfll_dvco_reset(void); +void tegra114_clock_deassert_dfll_dvco_reset(void); typedef void (*tegra_clk_apply_init_table_func)(void); extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table; diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c index a0fca00..e7bd62c 100644 --- a/drivers/clk/ux500/abx500-clk.c +++ b/drivers/clk/ux500/abx500-clk.c @@ -45,7 +45,7 @@ static int ab8500_reg_clks(struct device *dev) CLK_IS_ROOT); clk_register_clkdev(clk, "sysclk", "ab8500-usb.0"); clk_register_clkdev(clk, "sysclk", "ab-iddet.0"); - clk_register_clkdev(clk, "sysclk", "ab85xx-codec.0"); + clk_register_clkdev(clk, "sysclk", "snd-soc-mop500.0"); clk_register_clkdev(clk, "sysclk", "shrm_bus"); /* ab8500_sysclk2 */ @@ -70,19 +70,19 @@ static int ab8500_reg_clks(struct device *dev) AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_ULPCLKREQ, AB8500_SYSULPCLKCTRL1_ULPCLKREQ, 38400000, 9000, CLK_IS_ROOT); - clk_register_clkdev(clk, "ulpclk", "ab85xx-codec.0"); + clk_register_clkdev(clk, "ulpclk", "snd-soc-mop500.0"); /* ab8500_intclk */ clk = clk_reg_sysctrl_set_parent(dev , "intclk", intclk_parents, 2, intclk_reg_sel, intclk_reg_mask, intclk_reg_bits, 0); - clk_register_clkdev(clk, "intclk", "ab85xx-codec.0"); + clk_register_clkdev(clk, "intclk", "snd-soc-mop500.0"); clk_register_clkdev(clk, NULL, "ab8500-pwm.1"); /* ab8500_audioclk */ clk = clk_reg_sysctrl_gate(dev , "audioclk", "intclk", AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_AUDIOCLKENA, AB8500_SYSULPCLKCTRL1_AUDIOCLKENA, 0, 0); - clk_register_clkdev(clk, "audioclk", "ab85xx-codec.0"); + clk_register_clkdev(clk, "audioclk", "ab8500-codec.0"); return 0; } diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c index 10adfd2..f262588 100644 --- a/drivers/clk/ux500/u8540_clk.c +++ b/drivers/clk/ux500/u8540_clk.c @@ -12,10 +12,568 @@ #include <linux/clk-provider.h> #include <linux/mfd/dbx500-prcmu.h> #include <linux/platform_data/clk-ux500.h> - #include "clk.h" -void u8540_clk_init(void) +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base) { - /* register clocks here */ + struct clk *clk; + + /* Clock sources. */ + /* Fixed ClockGen */ + clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "soc0_pll", NULL); + + clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "soc1_pll", NULL); + + clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "ddr_pll", NULL); + + clk = clk_register_fixed_rate(NULL, "rtc32k", NULL, + CLK_IS_ROOT|CLK_IGNORE_UNUSED, + 32768); + clk_register_clkdev(clk, "clk32k", NULL); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); + + clk = clk_register_fixed_rate(NULL, "ulp38m4", NULL, + CLK_IS_ROOT|CLK_IGNORE_UNUSED, + 38400000); + + clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "UART"); + + /* msp02clk needs a abx500 clk as parent. Handle by abx500 clk driver */ + clk = clk_reg_prcmu_gate("msp02clk", "ab9540_sysclk12_b1", + PRCMU_MSP02CLK, 0); + clk_register_clkdev(clk, NULL, "MSP02"); + + clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "MSP1"); + + clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "I2C"); + + clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "slim"); + + clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH1"); + + clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH2"); + + clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH3"); + + clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH5"); + + clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH6"); + + clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH7"); + + clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "lcd"); + clk_register_clkdev(clk, "lcd", "mcde"); + + clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BML8580CLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "bml"); + + clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + + clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + + clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "hdmi"); + clk_register_clkdev(clk, "hdmi", "mcde"); + + clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "apeat"); + + clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "apetrace"); + + clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "mcde"); + clk_register_clkdev(clk, "mcde", "mcde"); + clk_register_clkdev(clk, NULL, "dsilink.0"); + clk_register_clkdev(clk, NULL, "dsilink.1"); + clk_register_clkdev(clk, NULL, "dsilink.2"); + + clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "ipi2"); + + clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "dsialt"); + + clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "dma40.0"); + + clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "b2r2"); + clk_register_clkdev(clk, NULL, "b2r2_core"); + clk_register_clkdev(clk, NULL, "U8500-B2R2.0"); + clk_register_clkdev(clk, NULL, "b2r2_1_core"); + + clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "tv"); + clk_register_clkdev(clk, "tv", "mcde"); + + clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "SSP"); + + clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "rngclk"); + + clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "uicc"); + + clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "mtu0"); + clk_register_clkdev(clk, NULL, "mtu1"); + + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, + PRCMU_SDMMCCLK, 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdmmc"); + + clk = clk_reg_prcmu_opp_volt_scalable("sdmmchclk", NULL, + PRCMU_SDMMCHCLK, 400000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdmmchclk"); + + clk = clk_reg_prcmu_gate("hvaclk", NULL, PRCMU_HVACLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "hva"); + + clk = clk_reg_prcmu_gate("g1clk", NULL, PRCMU_G1CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "g1"); + + clk = clk_reg_prcmu_scalable("spare1clk", NULL, PRCMU_SPARE1CLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsilcd", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", + PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs2", "mcde"); + clk_register_clkdev(clk, "hs_clk", "dsilink.2"); + + clk = clk_reg_prcmu_scalable("dsilcd_pll", "spare1clk", + PRCMU_PLLDSI_LCD, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsilcd_pll", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll", + PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs0", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi0lcdclk", "dsilcd_pll", + PRCMU_DSI0CLK_LCD, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs0", "mcde"); + clk_register_clkdev(clk, "hs_clk", "dsilink.0"); + + clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll", + PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs1", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi1lcdclk", "dsilcd_pll", + PRCMU_DSI1CLK_LCD, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs1", "mcde"); + clk_register_clkdev(clk, "hs_clk", "dsilink.1"); + + clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk", + PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "lp_clk", "dsilink.0"); + clk_register_clkdev(clk, "dsilp0", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk", + PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "lp_clk", "dsilink.1"); + clk_register_clkdev(clk, "dsilp1", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk", + PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "lp_clk", "dsilink.2"); + clk_register_clkdev(clk, "dsilp2", "mcde"); + + clk = clk_reg_prcmu_scalable_rate("armss", NULL, + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "armss", NULL); + + clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", + CLK_IGNORE_UNUSED, 1, 2); + clk_register_clkdev(clk, NULL, "smp_twd"); + + /* PRCC P-clocks */ + /* Peripheral 1 : PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base, + BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "uart0"); + + clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base, + BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "uart1"); + + clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base, + BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base, + BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.0"); + + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base, + BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.1"); + + clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base, + BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi0"); + + clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); + + clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base, + BIT(7), 0); + clk_register_clkdev(clk, NULL, "spi3"); + + clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base, + BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); + + clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base, + BIT(9), 0); + clk_register_clkdev(clk, NULL, "gpio.0"); + clk_register_clkdev(clk, NULL, "gpio.1"); + clk_register_clkdev(clk, NULL, "gpioblock0"); + clk_register_clkdev(clk, "apb_pclk", "ab85xx-codec.0"); + + clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base, + BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base, + BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.3"); + + /* Peripheral 2 : PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base, + BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); + + clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "spi2"); + + clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base, + BIT(2), 0); + clk_register_clkdev(clk, NULL, "spi1"); + + clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base, + BIT(3), 0); + clk_register_clkdev(clk, NULL, "pwl"); + + clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base, + BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi4"); + + clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base, + BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.2"); + + clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi1"); + + clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base, + BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi3"); + + clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base, + BIT(8), 0); + clk_register_clkdev(clk, NULL, "spi0"); + + clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base, + BIT(9), 0); + clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0"); + + clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base, + BIT(10), 0); + clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0"); + + clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base, + BIT(11), 0); + clk_register_clkdev(clk, NULL, "gpio.6"); + clk_register_clkdev(clk, NULL, "gpio.7"); + clk_register_clkdev(clk, NULL, "gpioblock1"); + + clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base, + BIT(12), 0); + clk_register_clkdev(clk, "msp4-pclk", "ab85xx-codec.0"); + + /* Peripheral 3 : PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, + BIT(0), 0); + clk_register_clkdev(clk, NULL, "fsmc"); + + clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, + BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base, + BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); + + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base, + BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); + + clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base, + BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi2"); + + clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base, + BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "ske"); + clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad"); + + clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "uart2"); + + clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base, + BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi5"); + + clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base, + BIT(8), 0); + clk_register_clkdev(clk, NULL, "gpio.2"); + clk_register_clkdev(clk, NULL, "gpio.3"); + clk_register_clkdev(clk, NULL, "gpio.4"); + clk_register_clkdev(clk, NULL, "gpio.5"); + clk_register_clkdev(clk, NULL, "gpioblock2"); + + clk = clk_reg_prcc_pclk("p3_pclk9", "per3clk", clkrst3_base, + BIT(9), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.5"); + + clk = clk_reg_prcc_pclk("p3_pclk10", "per3clk", clkrst3_base, + BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.6"); + + clk = clk_reg_prcc_pclk("p3_pclk11", "per3clk", clkrst3_base, + BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "uart3"); + + clk = clk_reg_prcc_pclk("p3_pclk12", "per3clk", clkrst3_base, + BIT(12), 0); + clk_register_clkdev(clk, "apb_pclk", "uart4"); + + /* Peripheral 5 : PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base, + BIT(0), 0); + clk_register_clkdev(clk, "usb", "musb-ux500.0"); + clk_register_clkdev(clk, "usbclk", "ab-iddet.0"); + + clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "gpio.8"); + clk_register_clkdev(clk, NULL, "gpioblock3"); + + /* Peripheral 6 : PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base, + BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "rng"); + + clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "cryp0"); + clk_register_clkdev(clk, NULL, "cryp1"); + + clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base, + BIT(2), 0); + clk_register_clkdev(clk, NULL, "hash0"); + + clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base, + BIT(3), 0); + clk_register_clkdev(clk, NULL, "pka"); + + clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base, + BIT(4), 0); + clk_register_clkdev(clk, NULL, "db8540-hash1"); + + clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base, + BIT(5), 0); + clk_register_clkdev(clk, NULL, "cfgreg"); + + clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "mtu0"); + + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base, + BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "mtu1"); + + /* + * PRCC K-clocks ==> see table PRCC_PCKEN/PRCC_KCKEN + * This differs from the internal implementation: + * We don't use the PERPIH[n| clock as parent, since those _should_ + * only be used as parents for the P-clocks. + * TODO: "parentjoin" with corresponding P-clocks for all K-clocks. + */ + + /* Peripheral 1 : PRCC K-clocks */ + clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk", + clkrst1_base, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart0"); + + clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk", + clkrst1_base, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart1"); + + clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", + clkrst1_base, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", + clkrst1_base, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.0"); + + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", + clkrst1_base, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.1"); + + clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmchclk", + clkrst1_base, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi0"); + + clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", + clkrst1_base, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", + clkrst1_base, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); + + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", + clkrst1_base, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", + clkrst1_base, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.3"); + + /* Peripheral 2 : PRCC K-clocks */ + clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", + clkrst2_base, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); + + clk = clk_reg_prcc_kclk("p2_pwl_kclk", "rtc32k", + clkrst2_base, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "pwl"); + + clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmchclk", + clkrst2_base, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi4"); + + clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", + clkrst2_base, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.2"); + + clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmchclk", + clkrst2_base, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi1"); + + clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk", + clkrst2_base, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi3"); + + clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk", + clkrst2_base, BIT(6), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + clk_register_clkdev(clk, "hsir_hsirxclk", "ste_hsi.0"); + + clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk", + clkrst2_base, BIT(7), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + clk_register_clkdev(clk, "hsit_hsitxclk", "ste_hsi.0"); + + /* Should only be 9540, but might be added for 85xx as well */ + clk = clk_reg_prcc_kclk("p2_msp4_kclk", "msp02clk", + clkrst2_base, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp4"); + clk_register_clkdev(clk, "msp4", "ab85xx-codec.0"); + + /* Peripheral 3 : PRCC K-clocks */ + clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", + clkrst3_base, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", + clkrst3_base, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); + + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", + clkrst3_base, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); + + clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmchclk", + clkrst3_base, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi2"); + + clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", + clkrst3_base, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ske"); + clk_register_clkdev(clk, NULL, "nmk-ske-keypad"); + + clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", + clkrst3_base, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart2"); + + clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk", + clkrst3_base, BIT(7), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi5"); + + clk = clk_reg_prcc_kclk("p3_i2c5_kclk", "i2cclk", + clkrst3_base, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.5"); + + clk = clk_reg_prcc_kclk("p3_i2c6_kclk", "i2cclk", + clkrst3_base, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.6"); + + clk = clk_reg_prcc_kclk("p3_uart3_kclk", "uartclk", + clkrst3_base, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart3"); + + clk = clk_reg_prcc_kclk("p3_uart4_kclk", "uartclk", + clkrst3_base, BIT(11), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart4"); + + /* Peripheral 6 : PRCC K-clocks */ + clk = clk_reg_prcc_kclk("p6_rng_kclk", "rngclk", + clkrst6_base, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "rng"); } diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c index dbc0191..4479478 100644 --- a/drivers/clk/ux500/u9540_clk.c +++ b/drivers/clk/ux500/u9540_clk.c @@ -12,10 +12,10 @@ #include <linux/clk-provider.h> #include <linux/mfd/dbx500-prcmu.h> #include <linux/platform_data/clk-ux500.h> - #include "clk.h" -void u9540_clk_init(void) +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base) { /* register clocks here */ } diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 256c8be..2dc8b41 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -107,7 +107,7 @@ void __init vexpress_osc_of_setup(struct device_node *node) osc->func = vexpress_config_func_get_by_node(node); if (!osc->func) { pr_err("Failed to obtain config func for node '%s'!\n", - node->name); + node->full_name); goto error; } @@ -119,7 +119,7 @@ void __init vexpress_osc_of_setup(struct device_node *node) of_property_read_string(node, "clock-output-names", &init.name); if (!init.name) - init.name = node->name; + init.name = node->full_name; init.ops = &vexpress_osc_ops; init.flags = CLK_IS_ROOT; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 66f8097..a292a1d 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -480,6 +480,7 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true), CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true), CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true), + CLK_MGT_ENTRY(BML8580CLK, PLL_DIV, true), CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true), CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true), CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true), diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index d14836e..ca355dd 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -32,6 +32,7 @@ #define PRCM_PER7CLK_MGT (0x040) #define PRCM_LCDCLK_MGT (0x044) #define PRCM_BMLCLK_MGT (0x04C) +#define PRCM_BML8580CLK_MGT (0x108) #define PRCM_HSITXCLK_MGT (0x050) #define PRCM_HSIRXCLK_MGT (0x054) #define PRCM_HDMICLK_MGT (0x058) diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 1186098..1ec14a7 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -210,6 +210,10 @@ void of_fixed_clk_setup(struct device_node *np); * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to * enable the clock. Setting this flag does the opposite: setting the bit * disable the clock and clearing it enables the clock + * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -220,6 +224,7 @@ struct clk_gate { }; #define CLK_GATE_SET_TO_DISABLE BIT(0) +#define CLK_GATE_HIWORD_MASK BIT(1) extern const struct clk_ops clk_gate_ops; struct clk *clk_register_gate(struct device *dev, const char *name, @@ -257,6 +262,10 @@ struct clk_div_table { * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). + * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. */ struct clk_divider { struct clk_hw hw; @@ -271,6 +280,7 @@ struct clk_divider { #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) #define CLK_DIVIDER_ALLOW_ZERO BIT(2) +#define CLK_DIVIDER_HIWORD_MASK BIT(3) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, @@ -299,6 +309,10 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * Flags: * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) + * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw; @@ -312,6 +326,7 @@ struct clk_mux { #define CLK_MUX_INDEX_ONE BIT(0) #define CLK_MUX_INDEX_BIT BIT(1) +#define CLK_MUX_HIWORD_MASK BIT(2) extern const struct clk_ops clk_mux_ops; @@ -423,6 +438,17 @@ struct of_device_id; typedef void (*of_clk_init_cb_t)(struct device_node *); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; + +#define CLK_OF_DECLARE(name, compat, fn) \ + static const struct of_device_id __clk_of_table_##name \ + __used __section(__clk_of_table) \ + = { .compatible = compat, .data = fn }; + +#ifdef CONFIG_OF int of_clk_add_provider(struct device_node *np, struct clk *(*clk_src_get)(struct of_phandle_args *args, void *data), @@ -430,19 +456,39 @@ int of_clk_add_provider(struct device_node *np, void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); -struct clk_onecell_data { - struct clk **clks; - unsigned int clk_num; -}; struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); -#define CLK_OF_DECLARE(name, compat, fn) \ - static const struct of_device_id __clk_of_table_##name \ - __used __section(__clk_of_table) \ - = { .compatible = compat, .data = fn }; +#else /* !CONFIG_OF */ +static inline int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data) +{ + return 0; +} +#define of_clk_del_provider(np) \ + { while (0); } +static inline struct clk *of_clk_src_simple_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline struct clk *of_clk_src_onecell_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline const char *of_clk_get_parent_name(struct device_node *np, + int index) +{ + return NULL; +} +#define of_clk_init(matches) \ + { while (0); } +#endif /* CONFIG_OF */ #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 642789b..23a0cee 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -120,9 +120,13 @@ static inline void tegra_cpu_clock_resume(void) } #endif +#ifdef CONFIG_ARCH_TEGRA void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); -void tegra_clocks_init(void); +#else +static inline void tegra_periph_reset_deassert(struct clk *c) {} +static inline void tegra_periph_reset_assert(struct clk *c) {} +#endif void tegra_clocks_apply_init_table(void); #endif /* __LINUX_CLK_TEGRA_H_ */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 990bc93..adba89d 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -278,8 +278,8 @@ struct ab8500_sysctrl_platform_data { #define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0) #define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1) -#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C -#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2 +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL0 BIT(2) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL1 BIT(3) #define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4) #define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5) #define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6) diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 689e6a0..ca0790f 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -134,6 +134,11 @@ enum prcmu_clock { PRCMU_SIACLK, PRCMU_SVACLK, PRCMU_ACLK, + PRCMU_HVACLK, /* Ux540 only */ + PRCMU_G1CLK, /* Ux540 only */ + PRCMU_SDMMCHCLK, + PRCMU_CAMCLK, + PRCMU_BML8580CLK, PRCMU_NUM_REG_CLOCKS, PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, PRCMU_CDCLK, @@ -148,6 +153,13 @@ enum prcmu_clock { PRCMU_DSI0ESCCLK, PRCMU_DSI1ESCCLK, PRCMU_DSI2ESCCLK, + /* LCD DSI PLL - Ux540 only */ + PRCMU_PLLDSI_LCD, + PRCMU_DSI0CLK_LCD, + PRCMU_DSI1CLK_LCD, + PRCMU_DSI0ESCCLK_LCD, + PRCMU_DSI1ESCCLK_LCD, + PRCMU_DSI2ESCCLK_LCD, }; /** diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 320d9c3..9d98f3a 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -12,7 +12,9 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, u32 clkrst5_base, u32 clkrst6_base); -void u9540_clk_init(void); -void u8540_clk_init(void); +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); #endif /* __CLK_UX500_H */ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index 92dabca..5433439 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -79,6 +79,23 @@ enum si5351_drive_strength { }; /** + * enum si5351_disable_state - Si5351 clock output disable state + * @SI5351_DISABLE_DEFAULT: default, do not change eeprom config + * @SI5351_DISABLE_LOW: CLKx is set to a LOW state when disabled + * @SI5351_DISABLE_HIGH: CLKx is set to a HIGH state when disabled + * @SI5351_DISABLE_FLOATING: CLKx is set to a FLOATING state when + * disabled + * @SI5351_DISABLE_NEVER: CLKx is NEVER disabled + */ +enum si5351_disable_state { + SI5351_DISABLE_DEFAULT = 0, + SI5351_DISABLE_LOW, + SI5351_DISABLE_HIGH, + SI5351_DISABLE_FLOATING, + SI5351_DISABLE_NEVER, +}; + +/** * struct si5351_clkout_config - Si5351 clock output configuration * @clkout: clkout number * @multisynth_src: multisynth source clock @@ -91,6 +108,7 @@ struct si5351_clkout_config { enum si5351_multisynth_src multisynth_src; enum si5351_clkout_src clkout_src; enum si5351_drive_strength drive; + enum si5351_disable_state disable_state; bool pll_master; unsigned long rate; }; |