diff options
| -rw-r--r-- | drivers/hwmon/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/hwmon/lm75.c | 206 |
2 files changed, 165 insertions, 48 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 86289c2..c882fd0 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -406,7 +406,12 @@ config SENSORS_LM75 - TelCom (now Microchip) TCN75 - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 - Most of these chips will require a "force" module parameter. + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 25ed265..7880c27 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -32,10 +32,28 @@ /* * This driver handles the LM75 and compatible digital temperature sensors. - * Compatibles include at least the DS75, DS1775, MCP980x, STDS75, TCN75, - * TMP100, TMP101, TMP75, TMP175, and TMP275. + * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be + * listed here. We start at 9 since I2C_CLIENT_INSMOD_*() currently allow + * definition of up to 8 chip types (plus zero). */ +enum lm75_type { /* keep sorted in alphabetical order */ + ds1775 = 9, + ds75, + /* lm75 -- in I2C_CLIENT_INSMOD_1() */ + lm75a, + max6625, + max6626, + mcp980x, + stds75, + tcn75, + tmp100, + tmp101, + tmp175, + tmp275, + tmp75, +}; + /* Addresses scanned by legacy style driver binding */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; @@ -54,9 +72,10 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { - struct i2c_client client; + struct i2c_client *client; struct device *hwmon_dev; struct mutex update_lock; + u8 orig_conf; char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ u16 temp[3]; /* Register values, @@ -65,7 +84,6 @@ struct lm75_data { 2 = hyst */ }; -static void lm75_init_client(struct i2c_client *client); static int lm75_read_value(struct i2c_client *client, u8 reg); static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm75_data *lm75_update_device(struct device *dev); @@ -120,16 +138,124 @@ static const struct attribute_group lm75_group = { /*-----------------------------------------------------------------------*/ +/* "New style" I2C driver binding -- following the driver model */ + +static int +lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct lm75_data *data; + int status; + u8 set_mask, clr_mask; + int new; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + + data->client = client; + mutex_init(&data->update_lock); + + /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. + * Then tweak to be more precise when appropriate. + */ + set_mask = 0; + clr_mask = (1 << 0) /* continuous conversions */ + | (1 << 6) | (1 << 5); /* 9-bit mode */ + + /* configure as specified */ + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + goto exit_free; + } + data->orig_conf = status; + new = status & ~clr_mask; + new |= set_mask; + if (status != new) + lm75_write_value(client, LM75_REG_CONF, new); + dev_dbg(&client->dev, "Config %02x\n", new); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &lm75_group); + if (status) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + data->hwmon_dev->bus_id, client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &lm75_group); +exit_free: + i2c_set_clientdata(client, NULL); + kfree(data); + return status; +} + +static int lm75_remove(struct i2c_client *client) +{ + struct lm75_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_write_value(client, LM75_REG_CONF, data->orig_conf); + i2c_set_clientdata(client, NULL); + kfree(data); + return 0; +} + +static const struct i2c_device_id lm75_ids[] = { + { "ds1775", ds1775, }, + { "ds75", ds75, }, + { "lm75", lm75, }, + { "lm75a", lm75a, }, + { "max6625", max6625, }, + { "max6626", max6626, }, + { "mcp980x", mcp980x, }, + { "stds75", stds75, }, + { "tcn75", tcn75, }, + { "tmp100", tmp100, }, + { "tmp101", tmp101, }, + { "tmp175", tmp175, }, + { "tmp275", tmp275, }, + { "tmp75", tmp75, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm75_ids); + +static struct i2c_driver lm75_driver = { + .driver = { + .name = "lm75", + }, + .probe = lm75_probe, + .remove = lm75_remove, + .id_table = lm75_ids, +}; + +/*-----------------------------------------------------------------------*/ + /* "Legacy" I2C driver binding */ -static struct i2c_driver lm75_driver; +static struct i2c_driver lm75_legacy_driver; /* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; - struct lm75_data *data; int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | @@ -139,16 +265,15 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid address. We create the client structure, even though there may be no sensor present. But it allows us to use i2c_smbus_read_*_data() calls. */ - if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + new_client = kzalloc(sizeof *new_client, GFP_KERNEL); + if (!new_client) { err = -ENOMEM; goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; - new_client->driver = &lm75_driver; + new_client->driver = &lm75_legacy_driver; new_client->flags = 0; /* Now, we do the remaining detection. There is no identification- @@ -189,38 +314,26 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } - /* NOTE: we treat "force=..." and "force_lm75=..." the same. */ + /* NOTE: we treat "force=..." and "force_lm75=..." the same. + * Only new-style driver binding distinguishes chip types. + */ strlcpy(new_client->name, "lm75", I2C_NAME_SIZE); - /* Fill in the remaining client fields and put it into the global list */ - data->valid = 0; - mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(new_client); + if (err) goto exit_free; - /* Initialize the LM75 chip */ - lm75_init_client(new_client); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group))) + err = lm75_probe(new_client, NULL); + if (err < 0) goto exit_detach; - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - return 0; -exit_remove: - sysfs_remove_group(&new_client->dev.kobj, &lm75_group); exit_detach: i2c_detach_client(new_client); exit_free: - kfree(data); + kfree(new_client); exit: return err; } @@ -234,17 +347,15 @@ static int lm75_attach_adapter(struct i2c_adapter *adapter) static int lm75_detach_client(struct i2c_client *client) { - struct lm75_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_remove(client); i2c_detach_client(client); - kfree(data); + kfree(client); return 0; } -static struct i2c_driver lm75_driver = { +static struct i2c_driver lm75_legacy_driver = { .driver = { - .name = "lm75", + .name = "lm75_legacy", }, .attach_adapter = lm75_attach_adapter, .detach_client = lm75_detach_client, @@ -276,16 +387,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) return i2c_smbus_write_word_data(client, reg, swab16(value)); } -static void lm75_init_client(struct i2c_client *client) -{ - int reg; - - /* Enable if in shutdown mode */ - reg = lm75_read_value(client, LM75_REG_CONF); - if (reg >= 0 && (reg & 0x01)) - lm75_write_value(client, LM75_REG_CONF, reg & 0xfe); -} - static struct lm75_data *lm75_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -323,11 +424,22 @@ static struct lm75_data *lm75_update_device(struct device *dev) static int __init sensors_lm75_init(void) { - return i2c_add_driver(&lm75_driver); + int status; + + status = i2c_add_driver(&lm75_driver); + if (status < 0) + return status; + + status = i2c_add_driver(&lm75_legacy_driver); + if (status < 0) + i2c_del_driver(&lm75_driver); + + return status; } static void __exit sensors_lm75_exit(void) { + i2c_del_driver(&lm75_legacy_driver); i2c_del_driver(&lm75_driver); } |