diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc | 13 | ||||
| -rw-r--r-- | drivers/usb/host/whci/qset.c | 24 | ||||
| -rw-r--r-- | drivers/usb/host/whci/whci-hc.h | 9 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wusbhc.c | 32 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wusbhc.h | 1 |
5 files changed, 68 insertions, 11 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc index 4e8106f..25b1e75 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc @@ -23,3 +23,16 @@ Description: Since this relates to security (specifically, the lifetime of PTKs and GTKs) it should not be changed from the default. + +What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate +Date: August 2009 +KernelVersion: 2.6.32 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The maximum PHY rate to use for all connected devices. + This is only of limited use for testing and + development as the hardware's automatic rate + adaptation is better then this simple control. + + Refer to [ECMA-368] section 10.3.1.1 for the value to + use. diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 0828086..39e855a 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -49,11 +49,13 @@ struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) * state * @urb: an urb for a transfer to this endpoint */ -static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) +static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb) { struct usb_device *usb_dev = urb->dev; + struct wusb_dev *wusb_dev = usb_dev->wusb_dev; struct usb_wireless_ep_comp_descriptor *epcd; bool is_out; + uint8_t phy_rate; is_out = usb_pipeout(urb->pipe); @@ -68,6 +70,22 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) qset->max_burst = 1; } + /* + * Initial PHY rate is 53.3 Mbit/s for control endpoints or + * the maximum supported by the device for other endpoints + * (unless limited by the user). + */ + if (usb_pipecontrol(urb->pipe)) + phy_rate = UWB_PHY_RATE_53; + else { + uint16_t phy_rates; + + phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates); + phy_rate = fls(phy_rates) - 1; + if (phy_rate > whc->wusbhc.phy_rate) + phy_rate = whc->wusbhc.phy_rate; + } + qset->qh.info1 = cpu_to_le32( QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) @@ -87,7 +105,7 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) * strength and can presumably guess the Tx power required * from that? */ qset->qh.info3 = cpu_to_le32( - QH_INFO3_TX_RATE_53_3 + QH_INFO3_TX_RATE(phy_rate) | QH_INFO3_TX_PWR(0) /* 0 == max power */ ); @@ -149,7 +167,7 @@ struct whc_qset *get_qset(struct whc *whc, struct urb *urb, qset->ep = urb->ep; urb->ep->hcpriv = qset; - qset_fill_qh(qset, urb); + qset_fill_qh(whc, qset, urb); } return qset; } diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index d5e5c3a..4d4cbc0 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -172,14 +172,7 @@ struct whc_qhead { #define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ #define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ -#define QH_INFO3_TX_RATE_53_3 (0 << 24) -#define QH_INFO3_TX_RATE_80 (1 << 24) -#define QH_INFO3_TX_RATE_106_7 (2 << 24) -#define QH_INFO3_TX_RATE_160 (3 << 24) -#define QH_INFO3_TX_RATE_200 (4 << 24) -#define QH_INFO3_TX_RATE_320 (5 << 24) -#define QH_INFO3_TX_RATE_400 (6 << 24) -#define QH_INFO3_TX_RATE_480 (7 << 24) +#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ #define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ #define QH_STATUS_FLOW_CTRL (1 << 15) diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index ee6256f..eab86e4 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -147,10 +147,40 @@ static ssize_t wusb_chid_store(struct device *dev, } static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store); + +static ssize_t wusb_phy_rate_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + + return sprintf(buf, "%d\n", wusbhc->phy_rate); +} + +static ssize_t wusb_phy_rate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + uint8_t phy_rate; + ssize_t result; + + result = sscanf(buf, "%hhu", &phy_rate); + if (result != 1) + return -EINVAL; + if (phy_rate >= UWB_PHY_RATE_INVALID) + return -EINVAL; + + wusbhc->phy_rate = phy_rate; + return size; +} +static DEVICE_ATTR(wusb_phy_rate, 0644, wusb_phy_rate_show, wusb_phy_rate_store); + /* Group all the WUSBHC attributes */ static struct attribute *wusbhc_attrs[] = { &dev_attr_wusb_trust_timeout.attr, &dev_attr_wusb_chid.attr, + &dev_attr_wusb_phy_rate.attr, NULL, }; @@ -177,6 +207,8 @@ int wusbhc_create(struct wusbhc *wusbhc) int result = 0; wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; + wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1; + mutex_init(&wusbhc->mutex); result = wusbhc_mmcie_create(wusbhc); if (result < 0) diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index 797c245..fd2fd4e 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -253,6 +253,7 @@ struct wusbhc { unsigned trust_timeout; /* in jiffies */ struct wusb_ckhdid chid; + uint8_t phy_rate; struct wuie_host_info *wuie_host_info; struct mutex mutex; /* locks everything else */ |