diff options
105 files changed, 52357 insertions, 1009 deletions
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index 9605179..4a4f47e 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -37,7 +37,7 @@ For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: 0x40 Inbound Queue Port 0x44 Outbound Queue Port -For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: +For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: BAR0 offset Register 0x20400 Inbound Doorbell Register @@ -55,9 +55,31 @@ For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: 0x40-0x1040 Inbound Queue 0x1040-0x2040 Outbound Queue +For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: -I/O Request Workflow ----------------------- + BAR0 offset Register + 0x0 IOP configuration information. + + BAR1 offset Register + 0x4000 Inbound List Base Address Low + 0x4004 Inbound List Base Address High + 0x4018 Inbound List Write Pointer + 0x402C Inbound List Configuration and Control + 0x4050 Outbound List Base Address Low + 0x4054 Outbound List Base Address High + 0x4058 Outbound List Copy Pointer Shadow Base Address Low + 0x405C Outbound List Copy Pointer Shadow Base Address High + 0x4088 Outbound List Interrupt Cause + 0x408C Outbound List Interrupt Enable + 0x1020C PCIe Function 0 Interrupt Enable + 0x10400 PCIe Function 0 to CPU Message A + 0x10420 CPU to PCIe Function 0 Message A + 0x10480 CPU to PCIe Function 0 Doorbell + 0x10484 CPU to PCIe Function 0 Doorbell Enable + + +I/O Request Workflow of Not Marvell Frey +------------------------------------------ All queued requests are handled via inbound/outbound queue port. A request packet can be allocated in either IOP or host memory. @@ -101,6 +123,45 @@ register 0. An outbound message with the same value indicates the completion of an inbound message. +I/O Request Workflow of Marvell Frey +-------------------------------------- + +All queued requests are handled via inbound/outbound list. + +To send a request to the controller: + + - Allocate a free request in host DMA coherent memory. + + Requests allocated in host memory must be aligned on 32-bytes boundary. + + - Fill the request with index of the request in the flag. + + Fill a free inbound list unit with the physical address and the size of + the request. + + Set up the inbound list write pointer with the index of previous unit, + round to 0 if the index reaches the supported count of requests. + + - Post the inbound list writer pointer to IOP. + + - The IOP process the request. When the request is completed, the flag of + the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a + free outbound list unit and the index of the outbound list unit will be + put into the copy pointer shadow register. An outbound interrupt will be + generated. + + - The host read the outbound list copy pointer shadow register and compare + with previous saved read ponter N. If they are different, the host will + read the (N+1)th outbound list unit. + + The host get the index of the request from the (N+1)th outbound list + unit and complete the request. + +Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe +Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register +with the same value indicates the completion of message. + + User-level Interface --------------------- @@ -112,7 +173,7 @@ The driver exposes following sysfs attributes: ----------------------------------------------------------------------------- -Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved. +Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/MAINTAINERS b/MAINTAINERS index 42f07ea..63b1405 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4655,13 +4655,16 @@ S: Maintained F: fs/logfs/ LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) -M: Eric Moore <Eric.Moore@lsi.com> +M: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> +M: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> M: support@lsi.com L: DL-MPTFusionLinux@lsi.com L: linux-scsi@vger.kernel.org W: http://www.lsilogic.com/support S: Supported F: drivers/message/fusion/ +F: drivers/scsi/mpt2sas/ +F: drivers/scsi/mpt3sas/ LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers M: Matthew Wilcox <matthew@wil.cx> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 130dd9d..a27b4ae 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3203,7 +3203,7 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) memset(c, 0, sizeof(*c)); c->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); - c->retval_len16 = htonl(FW_LEN16(*c)); + c->cfvalid_to_len16 = htonl(FW_LEN16(*c)); ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), c); if (ret < 0) return ret; @@ -3397,7 +3397,7 @@ static int adap_init0_config(struct adapter *adapter, int reset) htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); - caps_cmd.retval_len16 = + caps_cmd.cfvalid_to_len16 = htonl(FW_CAPS_CONFIG_CMD_CFVALID | FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | @@ -3422,7 +3422,7 @@ static int adap_init0_config(struct adapter *adapter, int reset) htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_WRITE); - caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), NULL); if (ret < 0) @@ -3497,7 +3497,7 @@ static int adap_init0_no_config(struct adapter *adapter, int reset) memset(&caps_cmd, 0, sizeof(caps_cmd)); caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); - caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd); if (ret < 0) @@ -3929,7 +3929,7 @@ static int adap_init0(struct adapter *adap) memset(&caps_cmd, 0, sizeof(caps_cmd)); caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); - caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd); if (ret < 0) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 3ecc087..fe9a2ea 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -508,7 +508,7 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q) { if (q->pend_cred >= 8) { wmb(); - t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), DBPRIO | + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), DBPRIO(1) | QID(q->cntxt_id) | PIDX(q->pend_cred / 8)); q->pend_cred &= 7; } @@ -2082,10 +2082,10 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, goto fl_nomem; flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc); - c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN | + c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN(1) | FW_IQ_CMD_FL0FETCHRO(1) | FW_IQ_CMD_FL0DATARO(1) | - FW_IQ_CMD_FL0PADEN); + FW_IQ_CMD_FL0PADEN(1)); c.fl0dcaen_to_fl0cidxfthresh = htons(FW_IQ_CMD_FL0FBMIN(2) | FW_IQ_CMD_FL0FBMAX(3)); c.fl0size = htons(flsz); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 45f2bea..8d9c754 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -648,12 +648,12 @@ static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, if (!byte_cnt || byte_cnt > 4) return -EINVAL; - if (t4_read_reg(adapter, SF_OP) & BUSY) + if (t4_read_reg(adapter, SF_OP) & SF_BUSY) return -EBUSY; cont = cont ? SF_CONT : 0; lock = lock ? SF_LOCK : 0; t4_write_reg(adapter, SF_OP, lock | cont | BYTECNT(byte_cnt - 1)); - ret = t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5); + ret = t4_wait_op_done(adapter, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, 5); if (!ret) *valp = t4_read_reg(adapter, SF_DATA); return ret; @@ -676,14 +676,14 @@ static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, { if (!byte_cnt || byte_cnt > 4) return -EINVAL; - if (t4_read_reg(adapter, SF_OP) & BUSY) + if (t4_read_reg(adapter, SF_OP) & SF_BUSY) return -EBUSY; cont = cont ? SF_CONT : 0; lock = lock ? SF_LOCK : 0; t4_write_reg(adapter, SF_DATA, val); t4_write_reg(adapter, SF_OP, lock | cont | BYTECNT(byte_cnt - 1) | OP_WR); - return t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5); + return t4_wait_op_done(adapter, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, 5); } /** @@ -2252,14 +2252,14 @@ int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, t4_write_reg(adap, EPIO_REG(DATA0), mask0); t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i) | EPIOWR); t4_read_reg(adap, EPIO_REG(OP)); /* flush */ - if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY) + if (t4_read_reg(adap, EPIO_REG(OP)) & SF_BUSY) return -ETIMEDOUT; /* write CRC */ t4_write_reg(adap, EPIO_REG(DATA0), crc); t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i + 32) | EPIOWR); t4_read_reg(adap, EPIO_REG(OP)); /* flush */ - if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY) + if (t4_read_reg(adap, EPIO_REG(OP)) & SF_BUSY) return -ETIMEDOUT; } #undef EPIO_REG @@ -2405,7 +2405,7 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, retry: memset(&c, 0, sizeof(c)); INIT_CMD(c, HELLO, WRITE); - c.err_to_mbasyncnot = htonl( + c.err_to_clearinit = htonl( FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : @@ -2426,7 +2426,7 @@ retry: return ret; } - v = ntohl(c.err_to_mbasyncnot); + v = ntohl(c.err_to_clearinit); master_mbox = FW_HELLO_CMD_MBMASTER_GET(v); if (state) { if (v & FW_HELLO_CMD_ERR) @@ -2774,7 +2774,7 @@ int t4_fw_config_file(struct adapter *adap, unsigned int mbox, htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); - caps_cmd.retval_len16 = + caps_cmd.cfvalid_to_len16 = htonl(FW_CAPS_CONFIG_CMD_CFVALID | FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | @@ -2797,7 +2797,7 @@ int t4_fw_config_file(struct adapter *adap, unsigned int mbox, htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_WRITE); - caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL); } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h index eb71b82..b760808 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h @@ -658,6 +658,7 @@ struct ulptx_sgl { __be32 cmd_nsge; #define ULPTX_CMD(x) ((x) << 24) #define ULPTX_NSGE(x) ((x) << 0) +#define ULPTX_MORE (1U << 23) __be32 len0; __be64 addr0; struct ulptx_sge_pair sge[0]; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index a1a8b57..75393f5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -67,7 +67,7 @@ #define QID_MASK 0xffff8000U #define QID_SHIFT 15 #define QID(x) ((x) << QID_SHIFT) -#define DBPRIO 0x00004000U +#define DBPRIO(x) ((x) << 14) #define PIDX_MASK 0x00003fffU #define PIDX_SHIFT 0 #define PIDX(x) ((x) << PIDX_SHIFT) @@ -193,6 +193,12 @@ #define SGE_FL_BUFFER_SIZE1 0x1048 #define SGE_FL_BUFFER_SIZE2 0x104c #define SGE_FL_BUFFER_SIZE3 0x1050 +#define SGE_FL_BUFFER_SIZE4 0x1054 +#define SGE_FL_BUFFER_SIZE5 0x1058 +#define SGE_FL_BUFFER_SIZE6 0x105c +#define SGE_FL_BUFFER_SIZE7 0x1060 +#define SGE_FL_BUFFER_SIZE8 0x1064 + #define SGE_INGRESS_RX_THRESHOLD 0x10a0 #define THRESHOLD_0_MASK 0x3f000000U #define THRESHOLD_0_SHIFT 24 @@ -217,6 +223,17 @@ #define EGRTHRESHOLD(x) ((x) << EGRTHRESHOLDshift) #define EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift) +#define SGE_DBFIFO_STATUS 0x10a4 +#define HP_INT_THRESH_SHIFT 28 +#define HP_INT_THRESH_MASK 0xfU +#define HP_INT_THRESH(x) ((x) << HP_INT_THRESH_SHIFT) +#define LP_INT_THRESH_SHIFT 12 +#define LP_INT_THRESH_MASK 0xfU +#define LP_INT_THRESH(x) ((x) << LP_INT_THRESH_SHIFT) + +#define SGE_DOORBELL_CONTROL 0x10a8 +#define ENABLE_DROP (1 << 13) + #define SGE_TIMER_VALUE_0_AND_1 0x10b8 #define TIMERVALUE0_MASK 0xffff0000U #define TIMERVALUE0_SHIFT 16 @@ -277,6 +294,10 @@ #define A_SGE_CTXT_CMD 0x11fc #define A_SGE_DBQ_CTXT_BADDR 0x1084 +#define PCIE_PF_CFG 0x40 +#define AIVEC(x) ((x) << 4) +#define AIVEC_MASK 0x3ffU + #define PCIE_PF_CLI 0x44 #define PCIE_INT_CAUSE 0x3004 #define UNXSPLCPLERR 0x20000000U @@ -322,6 +343,13 @@ #define PCIE_MEM_ACCESS_OFFSET 0x306c #define PCIE_FW 0x30b8 +#define PCIE_FW_ERR 0x80000000U +#define PCIE_FW_INIT 0x40000000U +#define PCIE_FW_HALT 0x20000000U +#define PCIE_FW_MASTER_VLD 0x00008000U +#define PCIE_FW_MASTER(x) ((x) << 12) +#define PCIE_FW_MASTER_MASK 0x7 +#define PCIE_FW_MASTER_GET(x) (((x) >> 12) & PCIE_FW_MASTER_MASK) #define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS 0x5908 #define RNPP 0x80000000U @@ -432,6 +460,9 @@ #define MBOWNER(x) ((x) << MBOWNER_SHIFT) #define MBOWNER_GET(x) (((x) & MBOWNER_MASK) >> MBOWNER_SHIFT) +#define CIM_PF_HOST_INT_ENABLE 0x288 +#define MBMSGRDYINTEN(x) ((x) << 19) + #define CIM_PF_HOST_INT_CAUSE 0x28c #define MBMSGRDYINT 0x00080000U @@ -922,7 +953,7 @@ #define SF_DATA 0x193f8 #define SF_OP 0x193fc -#define BUSY 0x80000000U +#define SF_BUSY 0x80000000U #define SF_LOCK 0x00000010U #define SF_CONT 0x00000008U #define BYTECNT_MASK 0x00000006U @@ -981,6 +1012,7 @@ #define I2CM 0x00000002U #define CIM 0x00000001U +#define PL_INT_ENABLE 0x19410 #define PL_INT_MAP0 0x19414 #define PL_RST 0x19428 #define PIORST 0x00000002U diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index a636463..0abc864 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -68,6 +68,7 @@ struct fw_wr_hdr { }; #define FW_WR_OP(x) ((x) << 24) +#define FW_WR_OP_GET(x) (((x) >> 24) & 0xff) #define FW_WR_ATOMIC(x) ((x) << 23) #define FW_WR_FLUSH(x) ((x) << 22) #define FW_WR_COMPL(x) ((x) << 21) @@ -222,6 +223,7 @@ struct fw_cmd_hdr { #define FW_CMD_OP(x) ((x) << 24) #define FW_CMD_OP_GET(x) (((x) >> 24) & 0xff) #define FW_CMD_REQUEST (1U << 23) +#define FW_CMD_REQUEST_GET(x) (((x) >> 23) & 0x1) #define FW_CMD_READ (1U << 22) #define FW_CMD_WRITE (1U << 21) #define FW_CMD_EXEC (1U << 20) @@ -229,6 +231,7 @@ struct fw_cmd_hdr { #define FW_CMD_RETVAL(x) ((x) << 8) #define FW_CMD_RETVAL_GET(x) (((x) >> 8) & 0xff) #define FW_CMD_LEN16(x) ((x) << 0) +#define FW_LEN16(fw_struct) FW_CMD_LEN16(sizeof(fw_struct) / 16) enum fw_ldst_addrspc { FW_LDST_ADDRSPC_FIRMWARE = 0x0001, @@ -241,7 +244,8 @@ enum fw_ldst_addrspc { FW_LDST_ADDRSPC_TP_MIB = 0x0012, FW_LDST_ADDRSPC_MDIO = 0x0018, FW_LDST_ADDRSPC_MPS = 0x0020, - FW_LDST_ADDRSPC_FUNC = 0x0028 + FW_LDST_ADDRSPC_FUNC = 0x0028, + FW_LDST_ADDRSPC_FUNC_PCIE = 0x0029, }; enum fw_ldst_mps_fid { @@ -303,6 +307,16 @@ struct fw_ldst_cmd { __be64 data0; __be64 data1; } func; + struct fw_ldst_pcie { + u8 ctrl_to_fn; + u8 bnum; + u8 r; + u8 ext_r; + u8 select_naccess; + u8 pcie_fn; + __be16 nset_pkd; + __be32 data[12]; + } pcie; } u; }; @@ -312,6 +326,9 @@ struct fw_ldst_cmd { #define FW_LDST_CMD_FID(x) ((x) << 15) #define FW_LDST_CMD_CTL(x) ((x) << 0) #define FW_LDST_CMD_RPLCPF(x) ((x) << 0) +#define FW_LDST_CMD_LC (1U << 4) +#define FW_LDST_CMD_NACCESS(x) ((x) << 0) +#define FW_LDST_CMD_FN(x) ((x) << 0) struct fw_reset_cmd { __be32 op_to_write; @@ -333,7 +350,7 @@ enum fw_hellow_cmd { struct fw_hello_cmd { __be32 op_to_write; __be32 retval_len16; - __be32 err_to_mbasyncnot; + __be32 err_to_clearinit; #define FW_HELLO_CMD_ERR (1U << 31) #define FW_HELLO_CMD_INIT (1U << 30) #define FW_HELLO_CMD_MASTERDIS(x) ((x) << 29) @@ -343,6 +360,7 @@ struct fw_hello_cmd { #define FW_HELLO_CMD_MBMASTER(x) ((x) << FW_HELLO_CMD_MBMASTER_SHIFT) #define FW_HELLO_CMD_MBMASTER_GET(x) \ (((x) >> FW_HELLO_CMD_MBMASTER_SHIFT) & FW_HELLO_CMD_MBMASTER_MASK) +#define FW_HELLO_CMD_MBASYNCNOTINT(x) ((x) << 23) #define FW_HELLO_CMD_MBASYNCNOT(x) ((x) << 20) #define FW_HELLO_CMD_STAGE(x) ((x) << 17) #define FW_HELLO_CMD_CLEARINIT (1U << 16) @@ -428,6 +446,7 @@ enum fw_caps_config_iscsi { enum fw_caps_config_fcoe { FW_CAPS_CONFIG_FCOE_INITIATOR = 0x00000001, FW_CAPS_CONFIG_FCOE_TARGET = 0x00000002, + FW_CAPS_CONFIG_FCOE_CTRL_OFLD = 0x00000004, }; enum fw_memtype_cf { @@ -440,7 +459,7 @@ enum fw_memtype_cf { struct fw_caps_config_cmd { __be32 op_to_write; - __be32 retval_len16; + __be32 cfvalid_to_len16; __be32 r2; __be32 hwmbitmap; __be16 nbmcaps; @@ -701,8 +720,8 @@ struct fw_iq_cmd { #define FW_IQ_CMD_FL0FETCHRO(x) ((x) << 6) #define FW_IQ_CMD_FL0HOSTFCMODE(x) ((x) << 4) #define FW_IQ_CMD_FL0CPRIO(x) ((x) << 3) -#define FW_IQ_CMD_FL0PADEN (1U << 2) -#define FW_IQ_CMD_FL0PACKEN (1U << 1) +#define FW_IQ_CMD_FL0PADEN(x) ((x) << 2) +#define FW_IQ_CMD_FL0PACKEN(x) ((x) << 1) #define FW_IQ_CMD_FL0CONGEN (1U << 0) #define FW_IQ_CMD_FL0DCAEN(x) ((x) << 15) @@ -1190,6 +1209,14 @@ enum fw_port_dcb_cfg_rc { FW_PORT_DCB_CFG_ERROR = 0x1 }; +enum fw_port_dcb_type { + FW_PORT_DCB_TYPE_PGID = 0x00, + FW_PORT_DCB_TYPE_PGRATE = 0x01, + FW_PORT_DCB_TYPE_PRIORATE = 0x02, + FW_PORT_DCB_TYPE_PFC = 0x03, + FW_PORT_DCB_TYPE_APP_ID = 0x04, +}; + struct fw_port_cmd { __be32 op_to_portid; __be32 action_to_len16; @@ -1257,6 +1284,7 @@ struct fw_port_cmd { #define FW_PORT_CMD_TXIPG(x) ((x) << 19) #define FW_PORT_CMD_LSTATUS (1U << 31) +#define FW_PORT_CMD_LSTATUS_GET(x) (((x) >> 31) & 0x1) #define FW_PORT_CMD_LSPEED(x) ((x) << 24) #define FW_PORT_CMD_LSPEED_GET(x) (((x) >> 24) & 0x3f) #define FW_PORT_CMD_TXPAUSE (1U << 23) @@ -1305,6 +1333,9 @@ enum fw_port_module_type { FW_PORT_MOD_TYPE_TWINAX_PASSIVE, FW_PORT_MOD_TYPE_TWINAX_ACTIVE, FW_PORT_MOD_TYPE_LRM, + FW_PORT_MOD_TYPE_ERROR = FW_PORT_CMD_MODTYPE_MASK - 3, + FW_PORT_MOD_TYPE_UNKNOWN = FW_PORT_CMD_MODTYPE_MASK - 2, + FW_PORT_MOD_TYPE_NOTSUPPORTED = FW_PORT_CMD_MODTYPE_MASK - 1, FW_PORT_MOD_TYPE_NONE = FW_PORT_CMD_MODTYPE_MASK }; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index f16745f..92170d5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -536,7 +536,7 @@ static inline void ring_fl_db(struct adapter *adapter, struct sge_fl *fl) if (fl->pend_cred >= FL_PER_EQ_UNIT) { wmb(); t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL, - DBPRIO | + DBPRIO(1) | QID(fl->cntxt_id) | PIDX(fl->pend_cred / FL_PER_EQ_UNIT)); fl->pend_cred %= FL_PER_EQ_UNIT; @@ -952,7 +952,7 @@ static inline void ring_tx_db(struct adapter *adapter, struct sge_txq *tq, * Warn if we write doorbells with the wrong priority and write * descriptors before telling HW. */ - WARN_ON((QID(tq->cntxt_id) | PIDX(n)) & DBPRIO); + WARN_ON((QID(tq->cntxt_id) | PIDX(n)) & DBPRIO(1)); wmb(); t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL, QID(tq->cntxt_id) | PIDX(n)); @@ -2126,8 +2126,8 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, cmd.iqns_to_fl0congen = cpu_to_be32( FW_IQ_CMD_FL0HOSTFCMODE(SGE_HOSTFCMODE_NONE) | - FW_IQ_CMD_FL0PACKEN | - FW_IQ_CMD_FL0PADEN); + FW_IQ_CMD_FL0PACKEN(1) | + FW_IQ_CMD_FL0PADEN(1)); cmd.fl0dcaen_to_fl0cidxfthresh = cpu_to_be16( FW_IQ_CMD_FL0FBMIN(SGE_FETCHBURSTMIN_64B) | diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 74bf1aa..142f632 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -603,6 +603,7 @@ config SCSI_ARCMSR source "drivers/scsi/megaraid/Kconfig.megaraid" source "drivers/scsi/mpt2sas/Kconfig" +source "drivers/scsi/mpt3sas/Kconfig" source "drivers/scsi/ufs/Kconfig" config SCSI_HPTIOP @@ -1812,6 +1813,7 @@ config SCSI_VIRTIO This is the virtual HBA driver for virtio. If the kernel will be used in a virtual machine, say Y or M. +source "drivers/scsi/csiostor/Kconfig" endif # SCSI_LOWLEVEL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 888f73a..b607ba4 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/ obj-$(CONFIG_SCSI_LPFC) += lpfc/ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ +obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/ obj-$(CONFIG_SCSI_PAS16) += pas16.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o @@ -106,6 +107,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/ +obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/ obj-$(CONFIG_SCSI_UFSHCD) += ufs/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index d79457a..681434e 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -132,11 +132,13 @@ struct inquiry_data { * M O D U L E G L O B A L S */ -static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap); -static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg); -static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg); -static unsigned long aac_build_sgraw2(struct scsi_cmnd *scsicmd, struct aac_raw_io2 *rio2, int sg_max); -static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, int pages, int nseg, int nseg_new); +static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *sgmap); +static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg); +static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg); +static long aac_build_sgraw2(struct scsi_cmnd *scsicmd, + struct aac_raw_io2 *rio2, int sg_max); +static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, + int pages, int nseg, int nseg_new); static int aac_send_srb_fib(struct scsi_cmnd* scsicmd); #ifdef AAC_DETAILED_STATUS_INFO static char *aac_get_status_string(u32 status); @@ -971,6 +973,7 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 { struct aac_dev *dev = fib->dev; u16 fibsize, command; + long ret; aac_fib_init(fib); if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) { @@ -982,7 +985,10 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 readcmd2->byteCount = cpu_to_le32(count<<9); readcmd2->cid = cpu_to_le16(scmd_id(cmd)); readcmd2->flags = cpu_to_le16(RIO2_IO_TYPE_READ); - aac_build_sgraw2(cmd, readcmd2, dev->scsi_host_ptr->sg_tablesize); + ret = aac_build_sgraw2(cmd, readcmd2, + dev->scsi_host_ptr->sg_tablesize); + if (ret < 0) + return ret; command = ContainerRawIo2; fibsize = sizeof(struct aac_raw_io2) + ((le32_to_cpu(readcmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212)); @@ -996,7 +1002,9 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 readcmd->flags = cpu_to_le16(RIO_TYPE_READ); readcmd->bpTotal = 0; readcmd->bpComplete = 0; - aac_build_sgraw(cmd, &readcmd->sg); + ret = aac_build_sgraw(cmd, &readcmd->sg); + if (ret < 0) + return ret; command = ContainerRawIo; fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count)-1) * sizeof(struct sgentryraw)); @@ -1019,6 +1027,8 @@ static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u { u16 fibsize; struct aac_read64 *readcmd; + long ret; + aac_fib_init(fib); readcmd = (struct aac_read64 *) fib_data(fib); readcmd->command = cpu_to_le32(VM_CtHostRead64); @@ -1028,7 +1038,9 @@ static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u readcmd->pad = 0; readcmd->flags = 0; - aac_build_sg64(cmd, &readcmd->sg); + ret = aac_build_sg64(cmd, &readcmd->sg); + if (ret < 0) + return ret; fibsize = sizeof(struct aac_read64) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentry64)); @@ -1050,6 +1062,8 @@ static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 { u16 fibsize; struct aac_read *readcmd; + long ret; + aac_fib_init(fib); readcmd = (struct aac_read *) fib_data(fib); readcmd->command = cpu_to_le32(VM_CtBlockRead); @@ -1057,7 +1071,9 @@ static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); readcmd->count = cpu_to_le32(count * 512); - aac_build_sg(cmd, &readcmd->sg); + ret = aac_build_sg(cmd, &readcmd->sg); + if (ret < 0) + return ret; fibsize = sizeof(struct aac_read) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentry)); @@ -1079,6 +1095,7 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u { struct aac_dev *dev = fib->dev; u16 fibsize, command; + long ret; aac_fib_init(fib); if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) { @@ -1093,7 +1110,10 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ? cpu_to_le16(RIO2_IO_TYPE_WRITE|RIO2_IO_SUREWRITE) : cpu_to_le16(RIO2_IO_TYPE_WRITE); - aac_build_sgraw2(cmd, writecmd2, dev->scsi_host_ptr->sg_tablesize); + ret = aac_build_sgraw2(cmd, writecmd2, + dev->scsi_host_ptr->sg_tablesize); + if (ret < 0) + return ret; command = ContainerRawIo2; fibsize = sizeof(struct aac_raw_io2) + ((le32_to_cpu(writecmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212)); @@ -1110,7 +1130,9 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u cpu_to_le16(RIO_TYPE_WRITE); writecmd->bpTotal = 0; writecmd->bpComplete = 0; - aac_build_sgraw(cmd, &writecmd->sg); + ret = aac_build_sgraw(cmd, &writecmd->sg); + if (ret < 0) + return ret; command = ContainerRawIo; fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count)-1) * sizeof (struct sgentryraw)); @@ -1133,6 +1155,8 @@ static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, { u16 fibsize; struct aac_write64 *writecmd; + long ret; + aac_fib_init(fib); writecmd = (struct aac_write64 *) fib_data(fib); writecmd->command = cpu_to_le32(VM_CtHostWrite64); @@ -1142,7 +1166,9 @@ static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, writecmd->pad = 0; writecmd->flags = 0; - aac_build_sg64(cmd, &writecmd->sg); + ret = aac_build_sg64(cmd, &writecmd->sg); + if (ret < 0) + return ret; fibsize = sizeof(struct aac_write64) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentry64)); @@ -1164,6 +1190,8 @@ static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 { u16 fibsize; struct aac_write *writecmd; + long ret; + aac_fib_init(fib); writecmd = (struct aac_write *) fib_data(fib); writecmd->command = cpu_to_le32(VM_CtBlockWrite); @@ -1173,7 +1201,9 @@ static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 writecmd->sg.count = cpu_to_le32(1); /* ->stable is not used - it did mean which type of write */ - aac_build_sg(cmd, &writecmd->sg); + ret = aac_build_sg(cmd, &writecmd->sg); + if (ret < 0) + return ret; fibsize = sizeof(struct aac_write) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentry)); @@ -1235,8 +1265,11 @@ static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd) { u16 fibsize; struct aac_srb * srbcmd = aac_scsi_common(fib, cmd); + long ret; - aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg); + ret = aac_build_sg64(cmd, (struct sgmap64 *) &srbcmd->sg); + if (ret < 0) + return ret; srbcmd->count = cpu_to_le32(scsi_bufflen(cmd)); memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); @@ -1263,8 +1296,11 @@ static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd) { u16 fibsize; struct aac_srb * srbcmd = aac_scsi_common(fib, cmd); + long ret; - aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg); + ret = aac_build_sg(cmd, (struct sgmap *)&srbcmd->sg); + if (ret < 0) + return ret; srbcmd->count = cpu_to_le32(scsi_bufflen(cmd)); memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); @@ -2870,7 +2906,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) return -1; } -static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) +static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg) { struct aac_dev *dev; unsigned long byte_count = 0; @@ -2883,7 +2919,8 @@ static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) psg->sg[0].count = 0; nseg = scsi_dma_map(scsicmd); - BUG_ON(nseg < 0); + if (nseg < 0) + return nseg; if (nseg) { struct scatterlist *sg; int i; @@ -2912,7 +2949,7 @@ static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) } -static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg) +static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg) { struct aac_dev *dev; unsigned long byte_count = 0; @@ -2927,7 +2964,8 @@ static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* p psg->sg[0].count = 0; nseg = scsi_dma_map(scsicmd); - BUG_ON(nseg < 0); + if (nseg < 0) + return nseg; if (nseg) { struct scatterlist *sg; int i; @@ -2957,7 +2995,7 @@ static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* p return byte_count; } -static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg) +static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg) { unsigned long byte_count = 0; int nseg; @@ -2972,7 +3010,8 @@ static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg->sg[0].flags = 0; nseg = scsi_dma_map(scsicmd); - BUG_ON(nseg < 0); + if (nseg < 0) + return nseg; if (nseg) { struct scatterlist *sg; int i; @@ -3005,13 +3044,15 @@ static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* return byte_count; } -static unsigned long aac_build_sgraw2(struct scsi_cmnd *scsicmd, struct aac_raw_io2 *rio2, int sg_max) +static long aac_build_sgraw2(struct scsi_cmnd *scsicmd, + struct aac_raw_io2 *rio2, int sg_max) { unsigned long byte_count = 0; int nseg; nseg = scsi_dma_map(scsicmd); - BUG_ON(nseg < 0); + if (nseg < 0) + return nseg; if (nseg) { struct scatterlist *sg; int i, conformable = 0; diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 9e933a8..742f5d7 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 29800 +# define AAC_DRIVER_BUILD 29801 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h index a50b6a9..f1733df 100644 --- a/drivers/scsi/be2iscsi/be.h +++ b/drivers/scsi/be2iscsi/be.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -28,7 +28,7 @@ /* BladeEngine Generation numbers */ #define BE_GEN2 2 #define BE_GEN3 3 - +#define BE_GEN4 4 struct be_dma_mem { void *va; dma_addr_t dma; @@ -84,9 +84,12 @@ static inline void queue_tail_inc(struct be_queue_info *q) /*ISCSI */ struct be_eq_obj { + bool todo_mcc_cq; + bool todo_cq; struct be_queue_info q; struct beiscsi_hba *phba; struct be_queue_info *cq; + struct work_struct work_cqs; /* Work Item */ struct blk_iopoll iopoll; }; diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c index 07d2cb1..5c87768 100644 --- a/drivers/scsi/be2iscsi/be_cmds.c +++ b/drivers/scsi/be2iscsi/be_cmds.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -56,7 +56,7 @@ int beiscsi_pci_soft_reset(struct beiscsi_hba *phba) writel(pconline0, (void *)pci_online0_offset); writel(pconline1, (void *)pci_online1_offset); - sreset = BE2_SET_RESET; + sreset |= BE2_SET_RESET; writel(sreset, (void *)pci_reset_offset); i = 0; @@ -133,6 +133,87 @@ unsigned int alloc_mcc_tag(struct beiscsi_hba *phba) return tag; } +/* + * beiscsi_mccq_compl()- Wait for completion of MBX + * @phba: Driver private structure + * @tag: Tag for the MBX Command + * @wrb: the WRB used for the MBX Command + * @cmd_hdr: IOCTL Hdr for the MBX Cmd + * + * Waits for MBX completion with the passed TAG. + * + * return + * Success: 0 + * Failure: Non-Zero + **/ +int beiscsi_mccq_compl(struct beiscsi_hba *phba, + uint32_t tag, struct be_mcc_wrb **wrb, + void *cmd_hdr) +{ + int rc = 0; + uint32_t mcc_tag_response; + uint16_t status = 0, addl_status = 0, wrb_num = 0; + struct be_mcc_wrb *temp_wrb; + struct be_cmd_req_hdr *ioctl_hdr; + struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; + + if (beiscsi_error(phba)) + return -EIO; + + /* wait for the mccq completion */ + rc = wait_event_interruptible_timeout( + phba->ctrl.mcc_wait[tag], + phba->ctrl.mcc_numtag[tag], + msecs_to_jiffies( + BEISCSI_HOST_MBX_TIMEOUT)); + + if (rc <= 0) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_INIT | BEISCSI_LOG_EH | + BEISCSI_LOG_CONFIG, + "BC_%d : MBX Cmd Completion timed out\n"); + rc = -EAGAIN; + goto release_mcc_tag; + } else + rc = 0; + + mcc_tag_response = phba->ctrl.mcc_numtag[tag]; + status = (mcc_tag_response & CQE_STATUS_MASK); + addl_status = ((mcc_tag_response & CQE_STATUS_ADDL_MASK) >> + CQE_STATUS_ADDL_SHIFT); + + if (cmd_hdr) { + ioctl_hdr = (struct be_cmd_req_hdr *)cmd_hdr; + } else { + wrb_num = (mcc_tag_response & CQE_STATUS_WRB_MASK) >> + CQE_STATUS_WRB_SHIFT; + temp_wrb = (struct be_mcc_wrb *)queue_get_wrb(mccq, wrb_num); + ioctl_hdr = embedded_payload(temp_wrb); + + if (wrb) + *wrb = temp_wrb; + } + + if (status || addl_status) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_INIT | BEISCSI_LOG_EH | + BEISCSI_LOG_CONFIG, + "BC_%d : MBX Cmd Failed for " + "Subsys : %d Opcode : %d with " + "Status : %d and Extd_Status : %d\n", + ioctl_hdr->subsystem, + ioctl_hdr->opcode, + status, addl_status); + rc = -EAGAIN; + } + +release_mcc_tag: + /* Release the MCC entry */ + free_mcc_tag(&phba->ctrl, tag); + + return rc; +} + void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag) { spin_lock(&ctrl->mbox_lock); @@ -168,11 +249,24 @@ static inline void be_mcc_compl_use(struct be_mcc_compl *compl) compl->flags = 0; } +/* + * be_mcc_compl_process()- Check the MBX comapletion status + * @ctrl: Function specific MBX data structure + * @compl: Completion status of MBX Command + * + * Check for the MBX completion status when BMBX method used + * + * return + * Success: Zero + * Failure: Non-Zero + **/ static int be_mcc_compl_process(struct be_ctrl_info *ctrl, struct be_mcc_compl *compl) { u16 compl_status, extd_status; + struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); + struct be_cmd_req_hdr *hdr = embedded_payload(wrb); be_dws_le_to_cpu(compl, 4); @@ -184,7 +278,10 @@ static int be_mcc_compl_process(struct be_ctrl_info *ctrl, beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BC_%d : error in cmd completion: status(compl/extd)=%d/%d\n", + "BC_%d : error in cmd completion: " + "Subsystem : %d Opcode : %d " + "status(compl/extd)=%d/%d\n", + hdr->subsystem, hdr->opcode, compl_status, extd_status); return -EBUSY; @@ -314,11 +411,24 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba) return status; } -/* Wait till no more pending mcc requests are present */ +/* + * be_mcc_wait_compl()- Wait for MBX completion + * @phba: driver private structure + * + * Wait till no more pending mcc requests are present + * + * return + * Success: 0 + * Failure: Non-Zero + * + **/ static int be_mcc_wait_compl(struct beiscsi_hba *phba) { int i, status; for (i = 0; i < mcc_timeout; i++) { + if (beiscsi_error(phba)) + return -EIO; + status = beiscsi_process_mcc(phba); if (status) return status; @@ -330,51 +440,83 @@ static int be_mcc_wait_compl(struct beiscsi_hba *phba) if (i == mcc_timeout) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BC_%d : mccq poll timed out\n"); - + "BC_%d : FW Timed Out\n"); + phba->fw_timeout = true; + beiscsi_ue_detect(phba); return -EBUSY; } return 0; } -/* Notify MCC requests and wait for completion */ +/* + * be_mcc_notify_wait()- Notify and wait for Compl + * @phba: driver private structure + * + * Notify MCC requests and wait for completion + * + * return + * Success: 0 + * Failure: Non-Zero + **/ int be_mcc_notify_wait(struct beiscsi_hba *phba) { be_mcc_notify(phba); return be_mcc_wait_compl(phba); } +/* + * be_mbox_db_ready_wait()- Check ready status + * @ctrl: Function specific MBX data structure + * + * Check for the ready status of FW to send BMBX + * commands to adapter. + * + * return + * Success: 0 + * Failure: Non-Zero + **/ static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl) { -#define long_delay 2000 void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET; - int cnt = 0, wait = 5; /* in usecs */ + struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); + int wait = 0; u32 ready; do { + + if (beiscsi_error(phba)) + return -EIO; + ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK; if (ready) break; - if (cnt > 12000000) { - struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); + if (wait > BEISCSI_HOST_MBX_TIMEOUT) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BC_%d : mbox_db poll timed out\n"); - + "BC_%d : FW Timed Out\n"); + phba->fw_timeout = true; + beiscsi_ue_detect(phba); return -EBUSY; } - if (cnt > 50) { - wait = long_delay; - mdelay(long_delay / 1000); - } else - udelay(wait); - cnt += wait; + mdelay(1); + wait++; } while (true); return 0; } +/* + * be_mbox_notify: Notify adapter of new BMBX command + * @ctrl: Function specific MBX data structure + * + * Ring doorbell to inform adapter of a BMBX command + * to process + * + * return + * Success: 0 + * Failure: Non-Zero + **/ int be_mbox_notify(struct be_ctrl_info *ctrl) { int status; @@ -391,13 +533,9 @@ int be_mbox_notify(struct be_ctrl_info *ctrl) iowrite32(val, db); status = be_mbox_db_ready_wait(ctrl); - if (status != 0) { - beiscsi_log(phba, KERN_ERR, - BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BC_%d : be_mbox_db_ready_wait failed\n"); - + if (status) return status; - } + val = 0; val &= ~MPU_MAILBOX_DB_RDY_MASK; val &= ~MPU_MAILBOX_DB_HI_MASK; @@ -405,13 +543,9 @@ int be_mbox_notify(struct be_ctrl_info *ctrl) iowrite32(val, db); status = be_mbox_db_ready_wait(ctrl); - if (status != 0) { - beiscsi_log(phba, KERN_ERR, - BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BC_%d : be_mbox_db_ready_wait failed\n"); - + if (status) return status; - } + if (be_mcc_compl_is_new(compl)) { status = be_mcc_compl_process(ctrl, &mbox->compl); be_mcc_compl_use(compl); @@ -499,7 +633,7 @@ void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, req_hdr->opcode = opcode; req_hdr->subsystem = subsystem; req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr)); - req_hdr->timeout = 120; + req_hdr->timeout = BEISCSI_FW_MBX_TIMEOUT; } static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages, @@ -649,18 +783,34 @@ int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl, OPCODE_COMMON_CQ_CREATE, sizeof(*req)); req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size)); + if (chip_skh_r(ctrl->pdev)) { + req->hdr.version = MBX_CMD_VER2; + req->page_size = 1; + AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, + ctxt, coalesce_wm); + AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, + ctxt, no_delay); + AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, + __ilog2_u32(cq->len / 256)); + AMAP_SET_BITS(struct amap_cq_context_v2, valid, ctxt, 1); + AMAP_SET_BITS(struct amap_cq_context_v2, eventable, ctxt, 1); + AMAP_SET_BITS(struct amap_cq_context_v2, eqid, ctxt, eq->id); + AMAP_SET_BITS(struct amap_cq_context_v2, armed, ctxt, 1); + } else { + AMAP_SET_BITS(struct amap_cq_context, coalescwm, + ctxt, coalesce_wm); + AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay); + AMAP_SET_BITS(struct amap_cq_context, count, ctxt, + __ilog2_u32(cq->len / 256)); + AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1); + AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts); + AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1); + AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id); + AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1); + AMAP_SET_BITS(struct amap_cq_context, func, ctxt, + PCI_FUNC(ctrl->pdev->devfn)); + } - AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm); - AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay); - AMAP_SET_BITS(struct amap_cq_context, count, ctxt, - __ilog2_u32(cq->len / 256)); - AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1); - AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts); - AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1); - AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id); - AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1); - AMAP_SET_BITS(struct amap_cq_context, func, ctxt, - PCI_FUNC(ctrl->pdev->devfn)); be_dws_cpu_to_le(ctxt, sizeof(req->context)); be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h index 2c8f98d..23397d5 100644 --- a/drivers/scsi/be2iscsi/be_cmds.h +++ b/drivers/scsi/be2iscsi/be_cmds.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -57,6 +57,16 @@ struct be_mcc_wrb { #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF #define CQE_STATUS_EXTD_SHIFT 16 /* bits 0 - 15 */ +#define CQE_STATUS_ADDL_MASK 0xFF00 +#define CQE_STATUS_MASK 0xFF +#define CQE_STATUS_ADDL_SHIFT 0x08 +#define CQE_STATUS_WRB_MASK 0xFF0000 +#define CQE_STATUS_WRB_SHIFT 16 +#define BEISCSI_HOST_MBX_TIMEOUT (110 * 1000) +#define BEISCSI_FW_MBX_TIMEOUT 100 + +/* MBOX Command VER */ +#define MBX_CMD_VER2 0x02 struct be_mcc_compl { u32 status; /* dword 0 */ @@ -183,7 +193,8 @@ struct be_cmd_req_hdr { u8 domain; /* dword 0 */ u32 timeout; /* dword 1 */ u32 request_length; /* dword 2 */ - u32 rsvd0; /* dword 3 */ + u8 version; /* dword 3 */ + u8 rsvd0[3]; /* dword 3 */ }; struct be_cmd_resp_hdr { @@ -483,10 +494,28 @@ struct amap_cq_context { u8 rsvd5[32]; /* dword 3 */ } __packed; +struct amap_cq_context_v2 { + u8 rsvd0[12]; /* dword 0 */ + u8 coalescwm[2]; /* dword 0 */ + u8 nodelay; /* dword 0 */ + u8 rsvd1[12]; /* dword 0 */ + u8 count[2]; /* dword 0 */ + u8 valid; /* dword 0 */ + u8 rsvd2; /* dword 0 */ + u8 eventable; /* dword 0 */ + u8 eqid[16]; /* dword 1 */ + u8 rsvd3[15]; /* dword 1 */ + u8 armed; /* dword 1 */ + u8 cqecount[16];/* dword 2 */ + u8 rsvd4[16]; /* dword 2 */ + u8 rsvd5[32]; /* dword 3 */ +}; + struct be_cmd_req_cq_create { struct be_cmd_req_hdr hdr; u16 num_pages; - u16 rsvd0; + u8 page_size; + u8 rsvd0; u8 context[sizeof(struct amap_cq_context) / 8]; struct phys_addr pages[4]; } __packed; @@ -663,6 +692,9 @@ unsigned int be_cmd_get_initname(struct beiscsi_hba *phba); unsigned int be_cmd_get_port_speed(struct beiscsi_hba *phba); void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag); + +int beiscsi_mccq_compl(struct beiscsi_hba *phba, + uint32_t tag, struct be_mcc_wrb **wrb, void *cmd_va); /*ISCSI Functuions */ int be_cmd_fw_initialize(struct be_ctrl_info *ctrl); @@ -804,6 +836,59 @@ struct amap_sol_cqe_ring { u8 valid; /* dword 3 */ } __packed; +struct amap_sol_cqe_v2 { + u8 hw_sts[8]; /* dword 0 */ + u8 i_sts[8]; /* dword 0 */ + u8 wrb_index[16]; /* dword 0 */ + u8 i_exp_cmd_sn[32]; /* dword 1 */ + u8 code[6]; /* dword 2 */ + u8 cmd_cmpl; /* dword 2 */ + u8 rsvd0; /* dword 2 */ + u8 i_cmd_wnd[8]; /* dword 2 */ + u8 cid[13]; /* dword 2 */ + u8 u; /* dword 2 */ + u8 o; /* dword 2 */ + u8 s; /* dword 2 */ + u8 i_res_cnt[31]; /* dword 3 */ + u8 valid; /* dword 3 */ +} __packed; + +struct common_sol_cqe { + u32 exp_cmdsn; + u32 res_cnt; + u16 wrb_index; + u16 cid; + u8 hw_sts; + u8 cmd_wnd; + u8 res_flag; /* the s feild of structure */ + u8 i_resp; /* for skh if cmd_complete is set then i_sts is response */ + u8 i_flags; /* for skh or the u and o feilds */ + u8 i_sts; /* for skh if cmd_complete is not-set then i_sts is status */ +}; + +/*** iSCSI ack/driver message completions ***/ +struct amap_it_dmsg_cqe { + u8 ack_num[32]; /* DWORD 0 */ + u8 pdu_bytes_rcvd[32]; /* DWORD 1 */ + u8 code[6]; /* DWORD 2 */ + u8 cid[10]; /* DWORD 2 */ + u8 wrb_idx[8]; /* DWORD 2 */ + u8 rsvd0[8]; /* DWORD 2*/ + u8 rsvd1[31]; /* DWORD 3*/ + u8 valid; /* DWORD 3 */ +} __packed; + +struct amap_it_dmsg_cqe_v2 { + u8 ack_num[32]; /* DWORD 0 */ + u8 pdu_bytes_rcvd[32]; /* DWORD 1 */ + u8 code[6]; /* DWORD 2 */ + u8 rsvd0[10]; /* DWORD 2 */ + u8 wrb_idx[16]; /* DWORD 2 */ + u8 rsvd1[16]; /* DWORD 3 */ + u8 cid[13]; /* DWORD 3 */ + u8 rsvd2[2]; /* DWORD 3 */ + u8 valid; /* DWORD 3 */ +} __packed; /** @@ -992,8 +1077,6 @@ struct be_cmd_get_all_if_id_req { #define CONNECTION_UPLOAD_ABORT_WITH_SEQ 4 /* Abortive upload with reset, * sequence number by driver */ -/* Returns byte size of given field with a structure. */ - /* Returns the number of items in the field array. */ #define BE_NUMBER_OF_FIELD(_type_, _field_) \ (FIELD_SIZEOF(_type_, _field_)/sizeof((((_type_ *)0)->_field_[0])))\ diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c index aedb0d9..214d691 100644 --- a/drivers/scsi/be2iscsi/be_iscsi.c +++ b/drivers/scsi/be2iscsi/be_iscsi.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -531,9 +531,9 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba, break; case ISCSI_NET_PARAM_IPV4_BOOTPROTO: if (!if_info.dhcp_state) - len = sprintf(buf, "static"); + len = sprintf(buf, "static\n"); else - len = sprintf(buf, "dhcp"); + len = sprintf(buf, "dhcp\n"); break; case ISCSI_NET_PARAM_IPV4_SUBNET: len = sprintf(buf, "%pI4\n", &if_info.ip_addr.subnet_mask); @@ -541,7 +541,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba, case ISCSI_NET_PARAM_VLAN_ENABLED: len = sprintf(buf, "%s\n", (if_info.vlan_priority == BEISCSI_VLAN_DISABLE) - ? "Disabled" : "Enabled"); + ? "Disabled\n" : "Enabled\n"); break; case ISCSI_NET_PARAM_VLAN_ID: if (if_info.vlan_priority == BEISCSI_VLAN_DISABLE) @@ -586,7 +586,7 @@ int be2iscsi_iface_get_param(struct iscsi_iface *iface, len = be2iscsi_get_if_param(phba, iface, param, buf); break; case ISCSI_NET_PARAM_IFACE_ENABLE: - len = sprintf(buf, "enabled"); + len = sprintf(buf, "enabled\n"); break; case ISCSI_NET_PARAM_IPV4_GW: memset(&gateway, 0, sizeof(gateway)); @@ -690,11 +690,9 @@ int beiscsi_set_param(struct iscsi_cls_conn *cls_conn, static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba) { int rc; - unsigned int tag, wrb_num; - unsigned short status, extd_status; + unsigned int tag; struct be_mcc_wrb *wrb; struct be_cmd_hba_name *resp; - struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; tag = be_cmd_get_initname(phba); if (!tag) { @@ -702,26 +700,16 @@ static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba) "BS_%d : Getting Initiator Name Failed\n"); return -EBUSY; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; + } - if (status || extd_status) { + rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); + if (rc) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BS_%d : MailBox Command Failed with " - "status = %d extd_status = %d\n", - status, extd_status); - - free_mcc_tag(&phba->ctrl, tag); - return -EAGAIN; + "BS_%d : Initiator Name MBX Failed\n"); + return rc; } - wrb = queue_get_wrb(mccq, wrb_num); - free_mcc_tag(&phba->ctrl, tag); + resp = embedded_payload(wrb); rc = sprintf(buf, "%s\n", resp->initiator_name); return rc; @@ -731,7 +719,6 @@ static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba) * beiscsi_get_port_state - Get the Port State * @shost : pointer to scsi_host structure * - * returns number of bytes */ static void beiscsi_get_port_state(struct Scsi_Host *shost) { @@ -750,13 +737,12 @@ static void beiscsi_get_port_state(struct Scsi_Host *shost) */ static int beiscsi_get_port_speed(struct Scsi_Host *shost) { - unsigned int tag, wrb_num; - unsigned short status, extd_status; + int rc; + unsigned int tag; struct be_mcc_wrb *wrb; struct be_cmd_ntwk_link_status_resp *resp; struct beiscsi_hba *phba = iscsi_host_priv(shost); struct iscsi_cls_host *ihost = shost->shost_data; - struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; tag = be_cmd_get_port_speed(phba); if (!tag) { @@ -764,26 +750,14 @@ static int beiscsi_get_port_speed(struct Scsi_Host *shost) "BS_%d : Getting Port Speed Failed\n"); return -EBUSY; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - - if (status || extd_status) { + } + rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); + if (rc) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BS_%d : MailBox Command Failed with " - "status = %d extd_status = %d\n", - status, extd_status); - - free_mcc_tag(&phba->ctrl, tag); - return -EAGAIN; + "BS_%d : Port Speed MBX Failed\n"); + return rc; } - wrb = queue_get_wrb(mccq, wrb_num); - free_mcc_tag(&phba->ctrl, tag); resp = embedded_payload(wrb); switch (resp->mac_speed) { @@ -937,6 +911,14 @@ static void beiscsi_set_params_for_offld(struct beiscsi_conn *beiscsi_conn, session->initial_r2t_en); AMAP_SET_BITS(struct amap_beiscsi_offload_params, imd, params, session->imm_data_en); + AMAP_SET_BITS(struct amap_beiscsi_offload_params, + data_seq_inorder, params, + session->dataseq_inorder_en); + AMAP_SET_BITS(struct amap_beiscsi_offload_params, + pdu_seq_inorder, params, + session->pdu_inorder_en); + AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_r2t, params, + session->max_r2t); AMAP_SET_BITS(struct amap_beiscsi_offload_params, exp_statsn, params, (conn->exp_statsn - 1)); } @@ -1027,12 +1009,10 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep, { struct beiscsi_endpoint *beiscsi_ep = ep->dd_data; struct beiscsi_hba *phba = beiscsi_ep->phba; - struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; struct be_mcc_wrb *wrb; struct tcp_connect_and_offload_out *ptcpcnct_out; - unsigned short status, extd_status; struct be_dma_mem nonemb_cmd; - unsigned int tag, wrb_num; + unsigned int tag; int ret = -ENOMEM; beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, @@ -1084,35 +1064,26 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep, pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return -EAGAIN; - } else { - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); } - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - if (status || extd_status) { + + ret = beiscsi_mccq_compl(phba, tag, &wrb, NULL); + if (ret) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BS_%d : mgmt_open_connection Failed" - " status = %d extd_status = %d\n", - status, extd_status); + "BS_%d : mgmt_open_connection Failed"); - free_mcc_tag(&phba->ctrl, tag); pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); goto free_ep; - } else { - wrb = queue_get_wrb(mccq, wrb_num); - free_mcc_tag(&phba->ctrl, tag); - - ptcpcnct_out = embedded_payload(wrb); - beiscsi_ep = ep->dd_data; - beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle; - beiscsi_ep->cid_vld = 1; - beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, - "BS_%d : mgmt_open_connection Success\n"); } + + ptcpcnct_out = embedded_payload(wrb); + beiscsi_ep = ep->dd_data; + beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle; + beiscsi_ep->cid_vld = 1; + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, + "BS_%d : mgmt_open_connection Success\n"); + pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return 0; @@ -1150,8 +1121,8 @@ beiscsi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, if (phba->state != BE_ADAPTER_UP) { ret = -EBUSY; - beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, - "BS_%d : The Adapter state is Not UP\n"); + beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG, + "BS_%d : The Adapter Port state is Down!!!\n"); return ERR_PTR(ret); } @@ -1216,11 +1187,9 @@ static int beiscsi_close_conn(struct beiscsi_endpoint *beiscsi_ep, int flag) beiscsi_ep->ep_cid); ret = -EAGAIN; - } else { - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - free_mcc_tag(&phba->ctrl, tag); } + + ret = beiscsi_mccq_compl(phba, tag, NULL, NULL); return ret; } @@ -1281,12 +1250,9 @@ void beiscsi_ep_disconnect(struct iscsi_endpoint *ep) beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, "BS_%d : mgmt_invalidate_connection Failed for cid=%d\n", beiscsi_ep->ep_cid); - } else { - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - free_mcc_tag(&phba->ctrl, tag); } + beiscsi_mccq_compl(phba, tag, NULL, NULL); beiscsi_close_conn(beiscsi_ep, tcp_upload_flag); beiscsi_free_ep(beiscsi_ep); beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid); diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h index 8b826fc..38eab72 100644 --- a/drivers/scsi/be2iscsi/be_iscsi.h +++ b/drivers/scsi/be2iscsi/be_iscsi.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index ff73f95..48d37dd 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -47,8 +47,6 @@ static unsigned int be_iopoll_budget = 10; static unsigned int be_max_phys_size = 64; static unsigned int enable_msix = 1; -static unsigned int gcrashmode = 0; -static unsigned int num_hba = 0; MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table); MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR); @@ -153,11 +151,54 @@ BEISCSI_RW_ATTR(log_enable, 0x00, "\t\t\t\tIO Path Events : 0x10\n" "\t\t\t\tConfiguration Path : 0x20\n"); +DEVICE_ATTR(beiscsi_drvr_ver, S_IRUGO, beiscsi_drvr_ver_disp, NULL); +DEVICE_ATTR(beiscsi_adapter_family, S_IRUGO, beiscsi_adap_family_disp, NULL); struct device_attribute *beiscsi_attrs[] = { &dev_attr_beiscsi_log_enable, + &dev_attr_beiscsi_drvr_ver, + &dev_attr_beiscsi_adapter_family, NULL, }; +static char const *cqe_desc[] = { + "RESERVED_DESC", + "SOL_CMD_COMPLETE", + "SOL_CMD_KILLED_DATA_DIGEST_ERR", + "CXN_KILLED_PDU_SIZE_EXCEEDS_DSL", + "CXN_KILLED_BURST_LEN_MISMATCH", + "CXN_KILLED_AHS_RCVD", + "CXN_KILLED_HDR_DIGEST_ERR", + "CXN_KILLED_UNKNOWN_HDR", + "CXN_KILLED_STALE_ITT_TTT_RCVD", + "CXN_KILLED_INVALID_ITT_TTT_RCVD", + "CXN_KILLED_RST_RCVD", + "CXN_KILLED_TIMED_OUT", + "CXN_KILLED_RST_SENT", + "CXN_KILLED_FIN_RCVD", + "CXN_KILLED_BAD_UNSOL_PDU_RCVD", + "CXN_KILLED_BAD_WRB_INDEX_ERROR", + "CXN_KILLED_OVER_RUN_RESIDUAL", + "CXN_KILLED_UNDER_RUN_RESIDUAL", + "CMD_KILLED_INVALID_STATSN_RCVD", + "CMD_KILLED_INVALID_R2T_RCVD", + "CMD_CXN_KILLED_LUN_INVALID", + "CMD_CXN_KILLED_ICD_INVALID", + "CMD_CXN_KILLED_ITT_INVALID", + "CMD_CXN_KILLED_SEQ_OUTOFORDER", + "CMD_CXN_KILLED_INVALID_DATASN_RCVD", + "CXN_INVALIDATE_NOTIFY", + "CXN_INVALIDATE_INDEX_NOTIFY", + "CMD_INVALIDATED_NOTIFY", + "UNSOL_HDR_NOTIFY", + "UNSOL_DATA_NOTIFY", + "UNSOL_DATA_DIGEST_ERROR_NOTIFY", + "DRIVERMSG_NOTIFY", + "CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN", + "SOL_CMD_KILLED_DIF_ERR", + "CXN_KILLED_SYN_RCVD", + "CXN_KILLED_IMM_DATA_RCVD" +}; + static int beiscsi_slave_configure(struct scsi_device *sdev) { blk_queue_max_segment_size(sdev->request_queue, 65536); @@ -226,11 +267,9 @@ static int beiscsi_eh_abort(struct scsi_cmnd *sc) nonemb_cmd.va, nonemb_cmd.dma); return FAILED; - } else { - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - free_mcc_tag(&phba->ctrl, tag); } + + beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va); pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return iscsi_eh_abort(sc); @@ -301,11 +340,9 @@ static int beiscsi_eh_device_reset(struct scsi_cmnd *sc) pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return FAILED; - } else { - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - free_mcc_tag(&phba->ctrl, tag); } + + beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va); pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return iscsi_eh_device_reset(sc); @@ -482,6 +519,7 @@ static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = { { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) }, + { PCI_DEVICE(ELX_VENDOR_ID, OC_SKH_ID1) }, { 0 } }; MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table); @@ -730,7 +768,7 @@ static irqreturn_t be_isr_mcc(int irq, void *dev_id) resource_id) / 32] & EQE_RESID_MASK) >> 16) == mcc->id) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_mcc_cq = 1; + pbe_eq->todo_mcc_cq = true; spin_unlock_irqrestore(&phba->isr_lock, flags); } AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0); @@ -738,8 +776,8 @@ static irqreturn_t be_isr_mcc(int irq, void *dev_id) eqe = queue_tail_node(eq); num_eq_processed++; } - if (phba->todo_mcc_cq) - queue_work(phba->wq, &phba->work_cqs); + if (pbe_eq->todo_mcc_cq) + queue_work(phba->wq, &pbe_eq->work_cqs); if (num_eq_processed) hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 1, 1); @@ -779,29 +817,26 @@ static irqreturn_t be_isr_msix(int irq, void *dev_id) eqe = queue_tail_node(eq); num_eq_processed++; } - if (num_eq_processed) - hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 0, 1); - - return IRQ_HANDLED; } else { while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32] & EQE_VALID_MASK) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_cq = 1; + pbe_eq->todo_cq = true; spin_unlock_irqrestore(&phba->isr_lock, flags); AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0); queue_tail_inc(eq); eqe = queue_tail_node(eq); num_eq_processed++; } - if (phba->todo_cq) - queue_work(phba->wq, &phba->work_cqs); - if (num_eq_processed) - hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 1, 1); - - return IRQ_HANDLED; + if (pbe_eq->todo_cq) + queue_work(phba->wq, &pbe_eq->work_cqs); } + + if (num_eq_processed) + hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 0, 1); + + return IRQ_HANDLED; } /** @@ -849,7 +884,7 @@ static irqreturn_t be_isr(int irq, void *dev_id) resource_id) / 32] & EQE_RESID_MASK) >> 16) == mcc->id) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_mcc_cq = 1; + pbe_eq->todo_mcc_cq = true; spin_unlock_irqrestore(&phba->isr_lock, flags); num_mcceq_processed++; } else { @@ -862,8 +897,8 @@ static irqreturn_t be_isr(int irq, void *dev_id) eqe = queue_tail_node(eq); } if (num_ioeq_processed || num_mcceq_processed) { - if (phba->todo_mcc_cq) - queue_work(phba->wq, &phba->work_cqs); + if (pbe_eq->todo_mcc_cq) + queue_work(phba->wq, &pbe_eq->work_cqs); if ((num_mcceq_processed) && (!num_ioeq_processed)) hwi_ring_eq_db(phba, eq->id, 0, @@ -886,11 +921,11 @@ static irqreturn_t be_isr(int irq, void *dev_id) resource_id) / 32] & EQE_RESID_MASK) >> 16) != cq->id) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_mcc_cq = 1; + pbe_eq->todo_mcc_cq = true; spin_unlock_irqrestore(&phba->isr_lock, flags); } else { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_cq = 1; + pbe_eq->todo_cq = true; spin_unlock_irqrestore(&phba->isr_lock, flags); } AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0); @@ -898,8 +933,8 @@ static irqreturn_t be_isr(int irq, void *dev_id) eqe = queue_tail_node(eq); num_ioeq_processed++; } - if (phba->todo_cq || phba->todo_mcc_cq) - queue_work(phba->wq, &phba->work_cqs); + if (pbe_eq->todo_cq || pbe_eq->todo_mcc_cq) + queue_work(phba->wq, &pbe_eq->work_cqs); if (num_ioeq_processed) { hwi_ring_eq_db(phba, eq->id, 0, @@ -1211,7 +1246,8 @@ free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle) static void be_complete_io(struct beiscsi_conn *beiscsi_conn, - struct iscsi_task *task, struct sol_cqe *psol) + struct iscsi_task *task, + struct common_sol_cqe *csol_cqe) { struct beiscsi_io_task *io_task = task->dd_data; struct be_status_bhs *sts_bhs = @@ -1221,20 +1257,14 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn, u32 resid = 0, exp_cmdsn, max_cmdsn; u8 rsp, status, flags; - exp_cmdsn = (psol-> - dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32] - & SOL_EXP_CMD_SN_MASK); - max_cmdsn = ((psol-> - dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32] - & SOL_EXP_CMD_SN_MASK) + - ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd) - / 32] & SOL_CMD_WND_MASK) >> 24) - 1); - rsp = ((psol->dw[offsetof(struct amap_sol_cqe, i_resp) / 32] - & SOL_RESP_MASK) >> 16); - status = ((psol->dw[offsetof(struct amap_sol_cqe, i_sts) / 32] - & SOL_STS_MASK) >> 8); - flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32] - & SOL_FLAGS_MASK) >> 24) | 0x80; + exp_cmdsn = csol_cqe->exp_cmdsn; + max_cmdsn = (csol_cqe->exp_cmdsn + + csol_cqe->cmd_wnd - 1); + rsp = csol_cqe->i_resp; + status = csol_cqe->i_sts; + flags = csol_cqe->i_flags; + resid = csol_cqe->res_cnt; + if (!task->sc) { if (io_task->scsi_cmnd) scsi_dma_unmap(io_task->scsi_cmnd); @@ -1249,9 +1279,6 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn, /* bidi not initially supported */ if (flags & (ISCSI_FLAG_CMD_UNDERFLOW | ISCSI_FLAG_CMD_OVERFLOW)) { - resid = (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / - 32] & SOL_RES_CNT_MASK); - if (!status && (flags & ISCSI_FLAG_CMD_OVERFLOW)) task->sc->result = DID_ERROR << 16; @@ -1273,13 +1300,8 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn, min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE)); } - if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) { - if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32] - & SOL_RES_CNT_MASK) - conn->rxdata_octets += (psol-> - dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32] - & SOL_RES_CNT_MASK); - } + if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) + conn->rxdata_octets += resid; unmap: scsi_dma_unmap(io_task->scsi_cmnd); iscsi_complete_scsi_task(task, exp_cmdsn, max_cmdsn); @@ -1287,7 +1309,8 @@ unmap: static void be_complete_logout(struct beiscsi_conn *beiscsi_conn, - struct iscsi_task *task, struct sol_cqe *psol) + struct iscsi_task *task, + struct common_sol_cqe *csol_cqe) { struct iscsi_logout_rsp *hdr; struct beiscsi_io_task *io_task = task->dd_data; @@ -1297,18 +1320,11 @@ be_complete_logout(struct beiscsi_conn *beiscsi_conn, hdr->opcode = ISCSI_OP_LOGOUT_RSP; hdr->t2wait = 5; hdr->t2retain = 0; - hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32] - & SOL_FLAGS_MASK) >> 24) | 0x80; - hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) / - 32] & SOL_RESP_MASK); - hdr->exp_cmdsn = cpu_to_be32(psol-> - dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32] - & SOL_EXP_CMD_SN_MASK); - hdr->max_cmdsn = be32_to_cpu((psol-> - dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32] - & SOL_EXP_CMD_SN_MASK) + - ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd) - / 32] & SOL_CMD_WND_MASK) >> 24) - 1); + hdr->flags = csol_cqe->i_flags; + hdr->response = csol_cqe->i_resp; + hdr->exp_cmdsn = csol_cqe->exp_cmdsn; + hdr->max_cmdsn = (csol_cqe->exp_cmdsn + csol_cqe->cmd_wnd - 1); + hdr->dlength[0] = 0; hdr->dlength[1] = 0; hdr->dlength[2] = 0; @@ -1319,7 +1335,8 @@ be_complete_logout(struct beiscsi_conn *beiscsi_conn, static void be_complete_tmf(struct beiscsi_conn *beiscsi_conn, - struct iscsi_task *task, struct sol_cqe *psol) + struct iscsi_task *task, + struct common_sol_cqe *csol_cqe) { struct iscsi_tm_rsp *hdr; struct iscsi_conn *conn = beiscsi_conn->conn; @@ -1327,16 +1344,12 @@ be_complete_tmf(struct beiscsi_conn *beiscsi_conn, hdr = (struct iscsi_tm_rsp *)task->hdr; hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP; - hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32] - & SOL_FLAGS_MASK) >> 24) | 0x80; - hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) / - 32] & SOL_RESP_MASK); - hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe, - i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK); - hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe, - i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) + - ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd) - / 32] & SOL_CMD_WND_MASK) >> 24) - 1); + hdr->flags = csol_cqe->i_flags; + hdr->response = csol_cqe->i_resp; + hdr->exp_cmdsn = csol_cqe->exp_cmdsn; + hdr->max_cmdsn = (csol_cqe->exp_cmdsn + + csol_cqe->cmd_wnd - 1); + hdr->itt = io_task->libiscsi_itt; __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0); } @@ -1352,15 +1365,24 @@ hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn, struct beiscsi_io_task *io_task; struct iscsi_conn *conn = beiscsi_conn->conn; struct iscsi_session *session = conn->session; + uint16_t wrb_index, cid; phwi_ctrlr = phba->phwi_ctrlr; - pwrb_context = &phwi_ctrlr->wrb_context[((psol-> - dw[offsetof(struct amap_sol_cqe, cid) / 32] & - SOL_CID_MASK) >> 6) - - phba->fw_config.iscsi_cid_start]; - pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol-> - dw[offsetof(struct amap_sol_cqe, wrb_index) / - 32] & SOL_WRB_INDEX_MASK) >> 16)]; + if (chip_skh_r(phba->pcidev)) { + wrb_index = AMAP_GET_BITS(struct amap_it_dmsg_cqe_v2, + wrb_idx, psol); + cid = AMAP_GET_BITS(struct amap_it_dmsg_cqe_v2, + cid, psol); + } else { + wrb_index = AMAP_GET_BITS(struct amap_it_dmsg_cqe, + wrb_idx, psol); + cid = AMAP_GET_BITS(struct amap_it_dmsg_cqe, + cid, psol); + } + + pwrb_context = &phwi_ctrlr->wrb_context[ + cid - phba->fw_config.iscsi_cid_start]; + pwrb_handle = pwrb_context->pwrb_handle_basestd[wrb_index]; task = pwrb_handle->pio_handle; io_task = task->dd_data; @@ -1374,26 +1396,78 @@ hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn, static void be_complete_nopin_resp(struct beiscsi_conn *beiscsi_conn, - struct iscsi_task *task, struct sol_cqe *psol) + struct iscsi_task *task, + struct common_sol_cqe *csol_cqe) { struct iscsi_nopin *hdr; struct iscsi_conn *conn = beiscsi_conn->conn; struct beiscsi_io_task *io_task = task->dd_data; hdr = (struct iscsi_nopin *)task->hdr; - hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32] - & SOL_FLAGS_MASK) >> 24) | 0x80; - hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe, - i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK); - hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe, - i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) + - ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd) - / 32] & SOL_CMD_WND_MASK) >> 24) - 1); + hdr->flags = csol_cqe->i_flags; + hdr->exp_cmdsn = cpu_to_be32(csol_cqe->exp_cmdsn); + hdr->max_cmdsn = be32_to_cpu(hdr->exp_cmdsn + + csol_cqe->cmd_wnd - 1); + hdr->opcode = ISCSI_OP_NOOP_IN; hdr->itt = io_task->libiscsi_itt; __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0); } +static void adapter_get_sol_cqe(struct beiscsi_hba *phba, + struct sol_cqe *psol, + struct common_sol_cqe *csol_cqe) +{ + if (chip_skh_r(phba->pcidev)) { + csol_cqe->exp_cmdsn = AMAP_GET_BITS(struct amap_sol_cqe_v2, + i_exp_cmd_sn, psol); + csol_cqe->res_cnt = AMAP_GET_BITS(struct amap_sol_cqe_v2, + i_res_cnt, psol); + csol_cqe->wrb_index = AMAP_GET_BITS(struct amap_sol_cqe_v2, + wrb_index, psol); + csol_cqe->cid = AMAP_GET_BITS(struct amap_sol_cqe_v2, + cid, psol); + csol_cqe->hw_sts = AMAP_GET_BITS(struct amap_sol_cqe_v2, + hw_sts, psol); + csol_cqe->cmd_wnd = AMAP_GET_BITS(struct amap_sol_cqe, + i_cmd_wnd, psol); + if (AMAP_GET_BITS(struct amap_sol_cqe_v2, + cmd_cmpl, psol)) + csol_cqe->i_sts = AMAP_GET_BITS(struct amap_sol_cqe_v2, + i_sts, psol); + else + csol_cqe->i_resp = AMAP_GET_BITS(struct amap_sol_cqe_v2, + i_sts, psol); + if (AMAP_GET_BITS(struct amap_sol_cqe_v2, + u, psol)) + csol_cqe->i_flags = ISCSI_FLAG_CMD_UNDERFLOW; + + if (AMAP_GET_BITS(struct amap_sol_cqe_v2, + o, psol)) + csol_cqe->i_flags |= ISCSI_FLAG_CMD_OVERFLOW; + } else { + csol_cqe->exp_cmdsn = AMAP_GET_BITS(struct amap_sol_cqe, + i_exp_cmd_sn, psol); + csol_cqe->res_cnt = AMAP_GET_BITS(struct amap_sol_cqe, + i_res_cnt, psol); + csol_cqe->cmd_wnd = AMAP_GET_BITS(struct amap_sol_cqe, + i_cmd_wnd, psol); + csol_cqe->wrb_index = AMAP_GET_BITS(struct amap_sol_cqe, + wrb_index, psol); + csol_cqe->cid = AMAP_GET_BITS(struct amap_sol_cqe, + cid, psol); + csol_cqe->hw_sts = AMAP_GET_BITS(struct amap_sol_cqe, + hw_sts, psol); + csol_cqe->i_resp = AMAP_GET_BITS(struct amap_sol_cqe, + i_resp, psol); + csol_cqe->i_sts = AMAP_GET_BITS(struct amap_sol_cqe, + i_sts, psol); + csol_cqe->i_flags = AMAP_GET_BITS(struct amap_sol_cqe, + i_flags, psol); + } +} + + static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn, struct beiscsi_hba *phba, struct sol_cqe *psol) { @@ -1405,19 +1479,22 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn, unsigned int type; struct iscsi_conn *conn = beiscsi_conn->conn; struct iscsi_session *session = conn->session; + struct common_sol_cqe csol_cqe = {0}; phwi_ctrlr = phba->phwi_ctrlr; - pwrb_context = &phwi_ctrlr->wrb_context[((psol->dw[offsetof - (struct amap_sol_cqe, cid) / 32] - & SOL_CID_MASK) >> 6) - - phba->fw_config.iscsi_cid_start]; - pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol-> - dw[offsetof(struct amap_sol_cqe, wrb_index) / - 32] & SOL_WRB_INDEX_MASK) >> 16)]; + + /* Copy the elements to a common structure */ + adapter_get_sol_cqe(phba, psol, &csol_cqe); + + pwrb_context = &phwi_ctrlr->wrb_context[ + csol_cqe.cid - phba->fw_config.iscsi_cid_start]; + + pwrb_handle = pwrb_context->pwrb_handle_basestd[ + csol_cqe.wrb_index]; + task = pwrb_handle->pio_handle; pwrb = pwrb_handle->pwrb; - type = (pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] & - WRB_TYPE_MASK) >> 28; + type = ((struct beiscsi_io_task *)task->dd_data)->wrb_type; spin_lock_bh(&session->lock); switch (type) { @@ -1425,17 +1502,16 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn, case HWH_TYPE_IO_RD: if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_NOOP_OUT) - be_complete_nopin_resp(beiscsi_conn, task, psol); + be_complete_nopin_resp(beiscsi_conn, task, &csol_cqe); else - be_complete_io(beiscsi_conn, task, psol); + be_complete_io(beiscsi_conn, task, &csol_cqe); break; case HWH_TYPE_LOGOUT: if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT) - be_complete_logout(beiscsi_conn, task, psol); + be_complete_logout(beiscsi_conn, task, &csol_cqe); else - be_complete_tmf(beiscsi_conn, task, psol); - + be_complete_tmf(beiscsi_conn, task, &csol_cqe); break; case HWH_TYPE_LOGIN: @@ -1446,7 +1522,7 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn, break; case HWH_TYPE_NOP: - be_complete_nopin_resp(beiscsi_conn, task, psol); + be_complete_nopin_resp(beiscsi_conn, task, &csol_cqe); break; default: @@ -1454,10 +1530,8 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn, BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO, "BM_%d : In hwi_complete_cmd, unknown type = %d" "wrb_index 0x%x CID 0x%x\n", type, - ((psol->dw[offsetof(struct amap_iscsi_wrb, - type) / 32] & SOL_WRB_INDEX_MASK) >> 16), - ((psol->dw[offsetof(struct amap_sol_cqe, - cid) / 32] & SOL_CID_MASK) >> 6)); + csol_cqe.wrb_index, + csol_cqe.cid); break; } @@ -1485,13 +1559,26 @@ hwi_get_async_handle(struct beiscsi_hba *phba, struct list_head *pbusy_list; struct async_pdu_handle *pasync_handle = NULL; unsigned char is_header = 0; + unsigned int index, dpl; + + if (chip_skh_r(phba->pcidev)) { + dpl = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe_v2, + dpl, pdpdu_cqe); + index = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe_v2, + index, pdpdu_cqe); + } else { + dpl = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe, + dpl, pdpdu_cqe); + index = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe, + index, pdpdu_cqe); + } phys_addr.u.a32.address_lo = - pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_lo) / 32] - - ((pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32] - & PDUCQE_DPL_MASK) >> 16); + (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, + db_addr_lo) / 32] - dpl); phys_addr.u.a32.address_hi = - pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_hi) / 32]; + pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, + db_addr_hi) / 32]; phys_addr.u.a64.address = *((unsigned long long *)(&phys_addr.u.a64.address)); @@ -1501,14 +1588,12 @@ hwi_get_async_handle(struct beiscsi_hba *phba, case UNSOL_HDR_NOTIFY: is_header = 1; - pbusy_list = hwi_get_async_busy_list(pasync_ctx, 1, - (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, - index) / 32] & PDUCQE_INDEX_MASK)); + pbusy_list = hwi_get_async_busy_list(pasync_ctx, + is_header, index); break; case UNSOL_DATA_NOTIFY: - pbusy_list = hwi_get_async_busy_list(pasync_ctx, 0, (pdpdu_cqe-> - dw[offsetof(struct amap_i_t_dpdu_cqe, - index) / 32] & PDUCQE_INDEX_MASK)); + pbusy_list = hwi_get_async_busy_list(pasync_ctx, + is_header, index); break; default: pbusy_list = NULL; @@ -1531,12 +1616,9 @@ hwi_get_async_handle(struct beiscsi_hba *phba, pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid - phba->fw_config.iscsi_cid_start; pasync_handle->is_header = is_header; - pasync_handle->buffer_len = ((pdpdu_cqe-> - dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32] - & PDUCQE_DPL_MASK) >> 16); + pasync_handle->buffer_len = dpl; + *pcq_index = index; - *pcq_index = (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, - index) / 32] & PDUCQE_INDEX_MASK); return pasync_handle; } @@ -1914,6 +1996,13 @@ static void beiscsi_process_mcc_isr(struct beiscsi_hba *phba) } +/** + * beiscsi_process_cq()- Process the Completion Queue + * @pbe_eq: Event Q on which the Completion has come + * + * return + * Number of Completion Entries processed. + **/ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) { struct be_queue_info *cq; @@ -1935,12 +2024,24 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) CQE_VALID_MASK) { be_dws_le_to_cpu(sol, sizeof(struct sol_cqe)); - cid = ((sol->dw[offsetof(struct amap_sol_cqe, cid)/32] & - CQE_CID_MASK) >> 6); - code = (sol->dw[offsetof(struct amap_sol_cqe, code)/32] & - CQE_CODE_MASK); - ep = phba->ep_array[cid - phba->fw_config.iscsi_cid_start]; + code = (sol->dw[offsetof(struct amap_sol_cqe, code) / + 32] & CQE_CODE_MASK); + + /* Get the CID */ + if (chip_skh_r(phba->pcidev)) { + if ((code == DRIVERMSG_NOTIFY) || + (code == UNSOL_HDR_NOTIFY) || + (code == UNSOL_DATA_NOTIFY)) + cid = AMAP_GET_BITS( + struct amap_i_t_dpdu_cqe_v2, + cid, sol); + else + cid = AMAP_GET_BITS(struct amap_sol_cqe_v2, + cid, sol); + } else + cid = AMAP_GET_BITS(struct amap_sol_cqe, cid, sol); + ep = phba->ep_array[cid - phba->fw_config.iscsi_cid_start]; beiscsi_ep = ep->dd_data; beiscsi_conn = beiscsi_ep->conn; @@ -1958,7 +2059,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case DRIVERMSG_NOTIFY: beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : Received DRIVERMSG_NOTIFY\n"); + "BM_%d : Received %s[%d] on CID : %d\n", + cqe_desc[code], code, cid); dmsg = (struct dmsg_cqe *)sol; hwi_complete_drvr_msgs(beiscsi_conn, phba, sol); @@ -1966,7 +2068,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case UNSOL_HDR_NOTIFY: beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : Received UNSOL_HDR_ NOTIFY\n"); + "BM_%d : Received %s[%d] on CID : %d\n", + cqe_desc[code], code, cid); hwi_process_default_pdu_ring(beiscsi_conn, phba, (struct i_t_dpdu_cqe *)sol); @@ -1974,7 +2077,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case UNSOL_DATA_NOTIFY: beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO, - "BM_%d : Received UNSOL_DATA_NOTIFY\n"); + "BM_%d : Received %s[%d] on CID : %d\n", + cqe_desc[code], code, cid); hwi_process_default_pdu_ring(beiscsi_conn, phba, (struct i_t_dpdu_cqe *)sol); @@ -1984,8 +2088,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case CXN_INVALIDATE_NOTIFY: beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : Ignoring CQ Error notification for" - " cmd/cxn invalidate\n"); + "BM_%d : Ignoring %s[%d] on CID : %d\n", + cqe_desc[code], code, cid); break; case SOL_CMD_KILLED_DATA_DIGEST_ERR: case CMD_KILLED_INVALID_STATSN_RCVD: @@ -1997,14 +2101,14 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case CMD_CXN_KILLED_INVALID_DATASN_RCVD: beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO, - "BM_%d : CQ Error notification for cmd.. " - "code %d cid 0x%x\n", code, cid); + "BM_%d : Cmd Notification %s[%d] on CID : %d\n", + cqe_desc[code], code, cid); break; case UNSOL_DATA_DIGEST_ERROR_NOTIFY: beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : Digest error on def pdu ring," - " dropping..\n"); + "BM_%d : Dropping %s[%d] on DPDU ring on CID : %d\n", + cqe_desc[code], code, cid); hwi_flush_default_pdu_buffer(phba, beiscsi_conn, (struct i_t_dpdu_cqe *) sol); break; @@ -2017,6 +2121,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case CXN_KILLED_INVALID_ITT_TTT_RCVD: case CXN_KILLED_TIMED_OUT: case CXN_KILLED_FIN_RCVD: + case CXN_KILLED_RST_SENT: + case CXN_KILLED_RST_RCVD: case CXN_KILLED_BAD_UNSOL_PDU_RCVD: case CXN_KILLED_BAD_WRB_INDEX_ERROR: case CXN_KILLED_OVER_RUN_RESIDUAL: @@ -2024,19 +2130,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN: beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : CQ Error %d, reset CID 0x%x...\n", - code, cid); - if (beiscsi_conn) - iscsi_conn_failure(beiscsi_conn->conn, - ISCSI_ERR_CONN_FAILED); - break; - case CXN_KILLED_RST_SENT: - case CXN_KILLED_RST_RCVD: - beiscsi_log(phba, KERN_ERR, - BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : CQ Error %d, reset" - "received/sent on CID 0x%x...\n", - code, cid); + "BM_%d : Event %s[%d] received on CID : %d\n", + cqe_desc[code], code, cid); if (beiscsi_conn) iscsi_conn_failure(beiscsi_conn->conn, ISCSI_ERR_CONN_FAILED); @@ -2044,8 +2139,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq) default: beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : CQ Error Invalid code= %d " - "received on CID 0x%x...\n", + "BM_%d : Invalid CQE Event Received Code : %d" + "CID 0x%x...\n", code, cid); break; } @@ -2068,30 +2163,30 @@ void beiscsi_process_all_cqs(struct work_struct *work) unsigned long flags; struct hwi_controller *phwi_ctrlr; struct hwi_context_memory *phwi_context; - struct be_eq_obj *pbe_eq; - struct beiscsi_hba *phba = - container_of(work, struct beiscsi_hba, work_cqs); + struct beiscsi_hba *phba; + struct be_eq_obj *pbe_eq = + container_of(work, struct be_eq_obj, work_cqs); + phba = pbe_eq->phba; phwi_ctrlr = phba->phwi_ctrlr; phwi_context = phwi_ctrlr->phwi_ctxt; - if (phba->msix_enabled) - pbe_eq = &phwi_context->be_eq[phba->num_cpus]; - else - pbe_eq = &phwi_context->be_eq[0]; - if (phba->todo_mcc_cq) { + if (pbe_eq->todo_mcc_cq) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_mcc_cq = 0; + pbe_eq->todo_mcc_cq = false; spin_unlock_irqrestore(&phba->isr_lock, flags); beiscsi_process_mcc_isr(phba); } - if (phba->todo_cq) { + if (pbe_eq->todo_cq) { spin_lock_irqsave(&phba->isr_lock, flags); - phba->todo_cq = 0; + pbe_eq->todo_cq = false; spin_unlock_irqrestore(&phba->isr_lock, flags); beiscsi_process_cq(pbe_eq); } + + /* rearm EQ for further interrupts */ + hwi_ring_eq_db(phba, pbe_eq->q.id, 0, 0, 1, 1); } static int be_iopoll(struct blk_iopoll *iop, int budget) @@ -2115,6 +2210,101 @@ static int be_iopoll(struct blk_iopoll *iop, int budget) } static void +hwi_write_sgl_v2(struct iscsi_wrb *pwrb, struct scatterlist *sg, + unsigned int num_sg, struct beiscsi_io_task *io_task) +{ + struct iscsi_sge *psgl; + unsigned int sg_len, index; + unsigned int sge_len = 0; + unsigned long long addr; + struct scatterlist *l_sg; + unsigned int offset; + + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, iscsi_bhs_addr_lo, pwrb, + io_task->bhs_pa.u.a32.address_lo); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, iscsi_bhs_addr_hi, pwrb, + io_task->bhs_pa.u.a32.address_hi); + + l_sg = sg; + for (index = 0; (index < num_sg) && (index < 2); index++, + sg = sg_next(sg)) { + if (index == 0) { + sg_len = sg_dma_len(sg); + addr = (u64) sg_dma_address(sg); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge0_addr_lo, pwrb, + lower_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge0_addr_hi, pwrb, + upper_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge0_len, pwrb, + sg_len); + sge_len = sg_len; + } else { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_r2t_offset, + pwrb, sge_len); + sg_len = sg_dma_len(sg); + addr = (u64) sg_dma_address(sg); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge1_addr_lo, pwrb, + lower_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge1_addr_hi, pwrb, + upper_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + sge1_len, pwrb, + sg_len); + } + } + psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag; + memset(psgl, 0, sizeof(*psgl) * BE2_SGE); + + AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len - 2); + + AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl, + io_task->bhs_pa.u.a32.address_hi); + AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl, + io_task->bhs_pa.u.a32.address_lo); + + if (num_sg == 1) { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb, + 1); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb, + 0); + } else if (num_sg == 2) { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb, + 0); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb, + 1); + } else { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb, + 0); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb, + 0); + } + + sg = l_sg; + psgl++; + psgl++; + offset = 0; + for (index = 0; index < num_sg; index++, sg = sg_next(sg), psgl++) { + sg_len = sg_dma_len(sg); + addr = (u64) sg_dma_address(sg); + AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl, + lower_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl, + upper_32_bits(addr)); + AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, sg_len); + AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, offset); + AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0); + offset += sg_len; + } + psgl--; + AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1); +} + +static void hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg, unsigned int num_sg, struct beiscsi_io_task *io_task) { @@ -2202,13 +2392,18 @@ hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg, AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1); } +/** + * hwi_write_buffer()- Populate the WRB with task info + * @pwrb: ptr to the WRB entry + * @task: iscsi task which is to be executed + **/ static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task) { struct iscsi_sge *psgl; - unsigned long long addr; struct beiscsi_io_task *io_task = task->dd_data; struct beiscsi_conn *beiscsi_conn = io_task->conn; struct beiscsi_hba *phba = beiscsi_conn->phba; + uint8_t dsp_value = 0; io_task->bhs_len = sizeof(struct be_nonio_bhs) - 2; AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb, @@ -2217,26 +2412,38 @@ static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task) io_task->bhs_pa.u.a32.address_hi); if (task->data) { - if (task->data_count) { - AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1); - addr = (u64) pci_map_single(phba->pcidev, - task->data, - task->data_count, 1); - } else { - AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0); - addr = 0; - } + + /* Check for the data_count */ + dsp_value = (task->data_count) ? 1 : 0; + + if (chip_skh_r(phba->pcidev)) + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp, + pwrb, dsp_value); + else + AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, + pwrb, dsp_value); + + /* Map addr only if there is data_count */ + if (dsp_value) { + io_task->mtask_addr = pci_map_single(phba->pcidev, + task->data, + task->data_count, + PCI_DMA_TODEVICE); + io_task->mtask_data_count = task->data_count; + } else + io_task->mtask_addr = 0; + AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb, - ((u32)(addr & 0xFFFFFFFF))); + lower_32_bits(io_task->mtask_addr)); AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb, - ((u32)(addr >> 32))); + upper_32_bits(io_task->mtask_addr)); AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb, task->data_count); AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb, 1); } else { AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0); - addr = 0; + io_task->mtask_addr = 0; } psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag; @@ -2259,9 +2466,9 @@ static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task) psgl++; if (task->data) { AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl, - ((u32)(addr & 0xFFFFFFFF))); + lower_32_bits(io_task->mtask_addr)); AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl, - ((u32)(addr >> 32))); + upper_32_bits(io_task->mtask_addr)); } AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0x106); } @@ -2843,7 +3050,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba, } return 0; create_eq_error: - for (i = 0; i < (phba->num_cpus + 1); i++) { + for (i = 0; i < (phba->num_cpus + eq_for_mcc); i++) { eq = &phwi_context->be_eq[i].q; mem = &eq->dma_mem; if (mem->va) @@ -3268,15 +3475,31 @@ err: return -ENOMEM; } -static int find_num_cpus(void) +/** + * find_num_cpus()- Get the CPU online count + * @phba: ptr to priv structure + * + * CPU count is used for creating EQ. + **/ +static void find_num_cpus(struct beiscsi_hba *phba) { int num_cpus = 0; num_cpus = num_online_cpus(); - if (num_cpus >= MAX_CPUS) - num_cpus = MAX_CPUS - 1; - return num_cpus; + switch (phba->generation) { + case BE_GEN2: + case BE_GEN3: + phba->num_cpus = (num_cpus > BEISCSI_MAX_NUM_CPUS) ? + BEISCSI_MAX_NUM_CPUS : num_cpus; + break; + case BE_GEN4: + phba->num_cpus = (num_cpus > OC_SKH_MAX_NUM_CPUS) ? + OC_SKH_MAX_NUM_CPUS : num_cpus; + break; + default: + phba->num_cpus = 1; + } } static int hwi_init_port(struct beiscsi_hba *phba) @@ -3644,12 +3867,9 @@ static void hwi_disable_intr(struct beiscsi_hba *phba) static int beiscsi_get_boot_info(struct beiscsi_hba *phba) { struct be_cmd_get_session_resp *session_resp; - struct be_mcc_wrb *wrb; struct be_dma_mem nonemb_cmd; - unsigned int tag, wrb_num; - unsigned short status, extd_status; + unsigned int tag; unsigned int s_handle; - struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; int ret = -ENOMEM; /* Get the session handle of the boot target */ @@ -3682,25 +3902,16 @@ static int beiscsi_get_boot_info(struct beiscsi_hba *phba) " Failed\n"); goto boot_freemem; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); + } - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - if (status || extd_status) { + ret = beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va); + if (ret) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, - "BM_%d : beiscsi_get_session_info Failed" - " status = %d extd_status = %d\n", - status, extd_status); - - free_mcc_tag(&phba->ctrl, tag); + "BM_%d : beiscsi_get_session_info Failed"); goto boot_freemem; } - wrb = queue_get_wrb(mccq, wrb_num); - free_mcc_tag(&phba->ctrl, tag); + session_resp = nonemb_cmd.va ; memcpy(&phba->boot_sess, &session_resp->session_info, @@ -3853,6 +4064,11 @@ static void beiscsi_clean_port(struct beiscsi_hba *phba) kfree(phba->ep_array); } +/** + * beiscsi_cleanup_task()- Free driver resources of the task + * @task: ptr to the iscsi task + * + **/ static void beiscsi_cleanup_task(struct iscsi_task *task) { struct beiscsi_io_task *io_task = task->dd_data; @@ -3900,6 +4116,13 @@ static void beiscsi_cleanup_task(struct iscsi_task *task) spin_unlock(&phba->mgmt_sgl_lock); io_task->psgl_handle = NULL; } + if (io_task->mtask_addr) { + pci_unmap_single(phba->pcidev, + io_task->mtask_addr, + io_task->mtask_data_count, + PCI_DMA_TODEVICE); + io_task->mtask_addr = 0; + } } } } @@ -3909,8 +4132,6 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn, struct beiscsi_offload_params *params) { struct wrb_handle *pwrb_handle; - struct iscsi_target_context_update_wrb *pwrb = NULL; - struct be_mem_descriptor *mem_descr; struct beiscsi_hba *phba = beiscsi_conn->phba; struct iscsi_task *task = beiscsi_conn->task; struct iscsi_session *session = task->conn->session; @@ -3927,67 +4148,16 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn, pwrb_handle = alloc_wrb_handle(phba, (beiscsi_conn->beiscsi_conn_cid - phba->fw_config.iscsi_cid_start)); - pwrb = (struct iscsi_target_context_update_wrb *)pwrb_handle->pwrb; - memset(pwrb, 0, sizeof(*pwrb)); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - max_burst_length, pwrb, params->dw[offsetof - (struct amap_beiscsi_offload_params, - max_burst_length) / 32]); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - max_send_data_segment_length, pwrb, - params->dw[offsetof(struct amap_beiscsi_offload_params, - max_send_data_segment_length) / 32]); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - first_burst_length, - pwrb, - params->dw[offsetof(struct amap_beiscsi_offload_params, - first_burst_length) / 32]); - - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - erl) / 32] & OFFLD_PARAMS_ERL)); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - dde) / 32] & OFFLD_PARAMS_DDE) >> 2); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - hde) / 32] & OFFLD_PARAMS_HDE) >> 3); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - imd) / 32] & OFFLD_PARAMS_IMD) >> 5); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn, - pwrb, - (params->dw[offsetof(struct amap_beiscsi_offload_params, - exp_statsn) / 32] + 1)); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb, - 0x7); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx, - pwrb, pwrb_handle->wrb_index); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb, - pwrb, pwrb_handle->nxt_wrb_index); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - session_state, pwrb, 0); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack, - pwrb, 1); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq, - pwrb, 0); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb, - 0); - mem_descr = phba->init_mem; - mem_descr += ISCSI_MEM_GLOBAL_HEADER; - - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - pad_buffer_addr_hi, pwrb, - mem_descr->mem_array[0].bus_address.u.a32.address_hi); - AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, - pad_buffer_addr_lo, pwrb, - mem_descr->mem_array[0].bus_address.u.a32.address_lo); + /* Check for the adapter family */ + if (chip_skh_r(phba->pcidev)) + beiscsi_offload_cxn_v2(params, pwrb_handle); + else + beiscsi_offload_cxn_v0(params, pwrb_handle, + phba->init_mem); - be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb)); + be_dws_le_to_cpu(pwrb_handle->pwrb, + sizeof(struct iscsi_target_context_update_wrb)); doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK; doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK) @@ -4044,13 +4214,25 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode) spin_lock(&phba->io_sgl_lock); io_task->psgl_handle = alloc_io_sgl_handle(phba); spin_unlock(&phba->io_sgl_lock); - if (!io_task->psgl_handle) + if (!io_task->psgl_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of IO_SGL_ICD Failed" + "for the CID : %d\n", + beiscsi_conn->beiscsi_conn_cid); goto free_hndls; + } io_task->pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid - phba->fw_config.iscsi_cid_start); - if (!io_task->pwrb_handle) + if (!io_task->pwrb_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of WRB_HANDLE Failed" + "for the CID : %d\n", + beiscsi_conn->beiscsi_conn_cid); goto free_io_hndls; + } } else { io_task->scsi_cmnd = NULL; if ((opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) { @@ -4059,8 +4241,16 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode) io_task->psgl_handle = (struct sgl_handle *) alloc_mgmt_sgl_handle(phba); spin_unlock(&phba->mgmt_sgl_lock); - if (!io_task->psgl_handle) + if (!io_task->psgl_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | + BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of MGMT_SGL_ICD Failed" + "for the CID : %d\n", + beiscsi_conn-> + beiscsi_conn_cid); goto free_hndls; + } beiscsi_conn->login_in_progress = 1; beiscsi_conn->plogin_sgl_handle = @@ -4069,8 +4259,16 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode) alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid - phba->fw_config.iscsi_cid_start); - if (!io_task->pwrb_handle) - goto free_io_hndls; + if (!io_task->pwrb_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | + BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of WRB_HANDLE Failed" + "for the CID : %d\n", + beiscsi_conn-> + beiscsi_conn_cid); + goto free_mgmt_hndls; + } beiscsi_conn->plogin_wrb_handle = io_task->pwrb_handle; @@ -4085,14 +4283,28 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode) spin_lock(&phba->mgmt_sgl_lock); io_task->psgl_handle = alloc_mgmt_sgl_handle(phba); spin_unlock(&phba->mgmt_sgl_lock); - if (!io_task->psgl_handle) + if (!io_task->psgl_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | + BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of MGMT_SGL_ICD Failed" + "for the CID : %d\n", + beiscsi_conn-> + beiscsi_conn_cid); goto free_hndls; + } io_task->pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid - phba->fw_config.iscsi_cid_start); - if (!io_task->pwrb_handle) + if (!io_task->pwrb_handle) { + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, + "BM_%d : Alloc of WRB_HANDLE Failed" + "for the CID : %d\n", + beiscsi_conn->beiscsi_conn_cid); goto free_mgmt_hndls; + } } } @@ -4124,11 +4336,64 @@ free_hndls: pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs, io_task->bhs_pa.u.a64.address); io_task->cmd_bhs = NULL; - beiscsi_log(phba, KERN_ERR, - BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG, - "BM_%d : Alloc of SGL_ICD Failed\n"); return -ENOMEM; } +int beiscsi_iotask_v2(struct iscsi_task *task, struct scatterlist *sg, + unsigned int num_sg, unsigned int xferlen, + unsigned int writedir) +{ + + struct beiscsi_io_task *io_task = task->dd_data; + struct iscsi_conn *conn = task->conn; + struct beiscsi_conn *beiscsi_conn = conn->dd_data; + struct beiscsi_hba *phba = beiscsi_conn->phba; + struct iscsi_wrb *pwrb = NULL; + unsigned int doorbell = 0; + + pwrb = io_task->pwrb_handle->pwrb; + memset(pwrb, 0, sizeof(*pwrb)); + + io_task->cmd_bhs->iscsi_hdr.exp_statsn = 0; + io_task->bhs_len = sizeof(struct be_cmd_bhs); + + if (writedir) { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, type, pwrb, + INI_WR_CMD); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp, pwrb, 1); + } else { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, type, pwrb, + INI_RD_CMD); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp, pwrb, 0); + } + + io_task->wrb_type = AMAP_GET_BITS(struct amap_iscsi_wrb_v2, + type, pwrb); + + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, lun, pwrb, + cpu_to_be16(*(unsigned short *) + &io_task->cmd_bhs->iscsi_hdr.lun)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb, xferlen); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, wrb_idx, pwrb, + io_task->pwrb_handle->wrb_index); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb, + be32_to_cpu(task->cmdsn)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sgl_idx, pwrb, + io_task->psgl_handle->sgl_index); + + hwi_write_sgl_v2(pwrb, sg, num_sg, io_task); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb, + io_task->pwrb_handle->nxt_wrb_index); + + be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb)); + + doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK; + doorbell |= (io_task->pwrb_handle->wrb_index & + DB_DEF_PDU_WRB_INDEX_MASK) << + DB_DEF_PDU_WRB_INDEX_SHIFT; + doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT; + iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET); + return 0; +} static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg, unsigned int num_sg, unsigned int xferlen, @@ -4156,6 +4421,9 @@ static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg, AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0); } + io_task->wrb_type = AMAP_GET_BITS(struct amap_iscsi_wrb, + type, pwrb); + AMAP_SET_BITS(struct amap_iscsi_wrb, lun, pwrb, cpu_to_be16(*(unsigned short *) &io_task->cmd_bhs->iscsi_hdr.lun)); @@ -4191,55 +4459,75 @@ static int beiscsi_mtask(struct iscsi_task *task) struct iscsi_wrb *pwrb = NULL; unsigned int doorbell = 0; unsigned int cid; + unsigned int pwrb_typeoffset = 0; cid = beiscsi_conn->beiscsi_conn_cid; pwrb = io_task->pwrb_handle->pwrb; memset(pwrb, 0, sizeof(*pwrb)); - AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, - be32_to_cpu(task->cmdsn)); - AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb, - io_task->pwrb_handle->wrb_index); - AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb, - io_task->psgl_handle->sgl_index); + + if (chip_skh_r(phba->pcidev)) { + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb, + be32_to_cpu(task->cmdsn)); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, wrb_idx, pwrb, + io_task->pwrb_handle->wrb_index); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sgl_idx, pwrb, + io_task->psgl_handle->sgl_index); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb, + task->data_count); + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb, + io_task->pwrb_handle->nxt_wrb_index); + pwrb_typeoffset = SKH_WRB_TYPE_OFFSET; + } else { + AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, + be32_to_cpu(task->cmdsn)); + AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb, + io_task->pwrb_handle->wrb_index); + AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb, + io_task->psgl_handle->sgl_index); + AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb, + task->data_count); + AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb, + io_task->pwrb_handle->nxt_wrb_index); + pwrb_typeoffset = BE_WRB_TYPE_OFFSET; + } + switch (task->hdr->opcode & ISCSI_OPCODE_MASK) { case ISCSI_OP_LOGIN: - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - TGT_DM_CMD); - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0); AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1); + ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset); hwi_write_buffer(pwrb, task); break; case ISCSI_OP_NOOP_OUT: if (task->hdr->ttt != ISCSI_RESERVED_TAG) { - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - TGT_DM_CMD); - AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, - pwrb, 0); - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1); + ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset); + if (chip_skh_r(phba->pcidev)) + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + dmsg, pwrb, 1); + else + AMAP_SET_BITS(struct amap_iscsi_wrb, + dmsg, pwrb, 1); } else { - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - INI_RD_CMD); - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0); + ADAPTER_SET_WRB_TYPE(pwrb, INI_RD_CMD, pwrb_typeoffset); + if (chip_skh_r(phba->pcidev)) + AMAP_SET_BITS(struct amap_iscsi_wrb_v2, + dmsg, pwrb, 0); + else + AMAP_SET_BITS(struct amap_iscsi_wrb, + dmsg, pwrb, 0); } hwi_write_buffer(pwrb, task); break; case ISCSI_OP_TEXT: - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - TGT_DM_CMD); - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0); + ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset); hwi_write_buffer(pwrb, task); break; case ISCSI_OP_SCSI_TMFUNC: - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - INI_TMF_CMD); - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0); + ADAPTER_SET_WRB_TYPE(pwrb, INI_TMF_CMD, pwrb_typeoffset); hwi_write_buffer(pwrb, task); break; case ISCSI_OP_LOGOUT: - AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0); - AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, - HWH_TYPE_LOGOUT); + ADAPTER_SET_WRB_TYPE(pwrb, HWH_TYPE_LOGOUT, pwrb_typeoffset); hwi_write_buffer(pwrb, task); break; @@ -4251,11 +4539,10 @@ static int beiscsi_mtask(struct iscsi_task *task) return -EINVAL; } - AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb, - task->data_count); - AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb, - io_task->pwrb_handle->nxt_wrb_index); - be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb)); + /* Set the task type */ + io_task->wrb_type = (chip_skh_r(phba->pcidev)) ? + AMAP_GET_BITS(struct amap_iscsi_wrb_v2, type, pwrb) : + AMAP_GET_BITS(struct amap_iscsi_wrb, type, pwrb); doorbell |= cid & DB_WRB_POST_CID_MASK; doorbell |= (io_task->pwrb_handle->wrb_index & @@ -4269,10 +4556,13 @@ static int beiscsi_task_xmit(struct iscsi_task *task) { struct beiscsi_io_task *io_task = task->dd_data; struct scsi_cmnd *sc = task->sc; + struct beiscsi_hba *phba = NULL; struct scatterlist *sg; int num_sg; unsigned int writedir = 0, xferlen = 0; + phba = ((struct beiscsi_conn *)task->conn->dd_data)->phba; + if (!sc) return beiscsi_mtask(task); @@ -4295,7 +4585,7 @@ static int beiscsi_task_xmit(struct iscsi_task *task) else writedir = 0; - return beiscsi_iotask(task, sg, num_sg, xferlen, writedir); + return phba->iotask_fn(task, sg, num_sg, xferlen, writedir); } /** @@ -4326,20 +4616,24 @@ static int beiscsi_bsg_request(struct bsg_job *job) beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, "BM_%d : Failed to allocate memory for " "beiscsi_bsg_request\n"); - return -EIO; + return -ENOMEM; } tag = mgmt_vendor_specific_fw_cmd(&phba->ctrl, phba, job, &nonemb_cmd); if (!tag) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, - "BM_%d : be_cmd_get_mac_addr Failed\n"); + "BM_%d : MBX Tag Allocation Failed\n"); pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, nonemb_cmd.va, nonemb_cmd.dma); return -EAGAIN; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); + } + + rc = wait_event_interruptible_timeout( + phba->ctrl.mcc_wait[tag], + phba->ctrl.mcc_numtag[tag], + msecs_to_jiffies( + BEISCSI_HOST_MBX_TIMEOUT)); extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; free_mcc_tag(&phba->ctrl, tag); @@ -4356,11 +4650,13 @@ static int beiscsi_bsg_request(struct bsg_job *job) nonemb_cmd.va, nonemb_cmd.dma); if (status || extd_status) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, - "BM_%d : be_cmd_get_mac_addr Failed" + "BM_%d : MBX Cmd Failed" " status = %d extd_status = %d\n", status, extd_status); return -EIO; + } else { + rc = 0; } break; @@ -4380,14 +4676,18 @@ void beiscsi_hba_attrs_init(struct beiscsi_hba *phba) beiscsi_log_enable_init(phba, beiscsi_log_enable); } +/* + * beiscsi_quiesce()- Cleanup Driver resources + * @phba: Instance Priv structure + * + * Free the OS and HW resources held by the driver + **/ static void beiscsi_quiesce(struct beiscsi_hba *phba) { struct hwi_controller *phwi_ctrlr; struct hwi_context_memory *phwi_context; struct be_eq_obj *pbe_eq; unsigned int i, msix_vec; - u8 *real_offset = 0; - u32 value = 0; phwi_ctrlr = phba->phwi_ctrlr; phwi_context = phwi_ctrlr->phwi_ctxt; @@ -4411,19 +4711,14 @@ static void beiscsi_quiesce(struct beiscsi_hba *phba) beiscsi_clean_port(phba); beiscsi_free_mem(phba); - real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE; - value = readl((void *)real_offset); - - if (value & 0x00010000) { - value &= 0xfffeffff; - writel(value, (void *)real_offset); - } beiscsi_unmap_pci_function(phba); pci_free_consistent(phba->pcidev, phba->ctrl.mbox_mem_alloced.size, phba->ctrl.mbox_mem_alloced.va, phba->ctrl.mbox_mem_alloced.dma); + + cancel_delayed_work_sync(&phba->beiscsi_hw_check_task); } static void beiscsi_remove(struct pci_dev *pcidev) @@ -4476,6 +4771,25 @@ static void beiscsi_msix_enable(struct beiscsi_hba *phba) return; } +/* + * beiscsi_hw_health_check()- Check adapter health + * @work: work item to check HW health + * + * Check if adapter in an unrecoverable state or not. + **/ +static void +beiscsi_hw_health_check(struct work_struct *work) +{ + struct beiscsi_hba *phba = + container_of(work, struct beiscsi_hba, + beiscsi_hw_check_task.work); + + beiscsi_ue_detect(phba); + + schedule_delayed_work(&phba->beiscsi_hw_check_task, + msecs_to_jiffies(1000)); +} + static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, const struct pci_device_id *id) { @@ -4483,9 +4797,7 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, struct hwi_controller *phwi_ctrlr; struct hwi_context_memory *phwi_context; struct be_eq_obj *pbe_eq; - int ret, num_cpus, i; - u8 *real_offset = 0; - u32 value = 0; + int ret, i; ret = beiscsi_enable_pci(pcidev); if (ret < 0) { @@ -4504,25 +4816,33 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, /* Initialize Driver configuration Paramters */ beiscsi_hba_attrs_init(phba); + phba->fw_timeout = false; + + switch (pcidev->device) { case BE_DEVICE_ID1: case OC_DEVICE_ID1: case OC_DEVICE_ID2: phba->generation = BE_GEN2; + phba->iotask_fn = beiscsi_iotask; break; case BE_DEVICE_ID2: case OC_DEVICE_ID3: phba->generation = BE_GEN3; + phba->iotask_fn = beiscsi_iotask; break; + case OC_SKH_ID1: + phba->generation = BE_GEN4; + phba->iotask_fn = beiscsi_iotask_v2; default: phba->generation = 0; } if (enable_msix) - num_cpus = find_num_cpus(); + find_num_cpus(phba); else - num_cpus = 1; - phba->num_cpus = num_cpus; + phba->num_cpus = 1; + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, "BM_%d : num_cpus = %d\n", phba->num_cpus); @@ -4540,31 +4860,18 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, goto hba_free; } - if (!num_hba) { - real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE; - value = readl((void *)real_offset); - if (value & 0x00010000) { - gcrashmode++; - beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, - "BM_%d : Loading Driver in crashdump mode\n"); - ret = beiscsi_cmd_reset_function(phba); - if (ret) { - beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, - "BM_%d : Reset Failed. Aborting Crashdump\n"); - goto hba_free; - } - ret = be_chk_reset_complete(phba); - if (ret) { - beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, - "BM_%d : Failed to get out of reset." - "Aborting Crashdump\n"); - goto hba_free; - } - } else { - value |= 0x00010000; - writel(value, (void *)real_offset); - num_hba++; - } + ret = beiscsi_cmd_reset_function(phba); + if (ret) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BM_%d : Reset Failed. Aborting Crashdump\n"); + goto hba_free; + } + ret = be_chk_reset_complete(phba); + if (ret) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BM_%d : Failed to get out of reset." + "Aborting Crashdump\n"); + goto hba_free; } spin_lock_init(&phba->io_sgl_lock); @@ -4596,7 +4903,7 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, phba->ctrl.mcc_alloc_index = phba->ctrl.mcc_free_index = 0; - snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u", + snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_%02x_wq", phba->shost->host_no); phba->wq = alloc_workqueue(phba->wq_name, WQ_MEM_RECLAIM, 1); if (!phba->wq) { @@ -4606,10 +4913,12 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, goto free_twq; } - INIT_WORK(&phba->work_cqs, beiscsi_process_all_cqs); + INIT_DELAYED_WORK(&phba->beiscsi_hw_check_task, + beiscsi_hw_health_check); phwi_ctrlr = phba->phwi_ctrlr; phwi_context = phwi_ctrlr->phwi_ctxt; + if (blk_iopoll_enabled) { for (i = 0; i < phba->num_cpus; i++) { pbe_eq = &phwi_context->be_eq[i]; @@ -4617,7 +4926,25 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, be_iopoll); blk_iopoll_enable(&pbe_eq->iopoll); } + + i = (phba->msix_enabled) ? i : 0; + /* Work item for MCC handling */ + pbe_eq = &phwi_context->be_eq[i]; + INIT_WORK(&pbe_eq->work_cqs, beiscsi_process_all_cqs); + } else { + if (phba->msix_enabled) { + for (i = 0; i <= phba->num_cpus; i++) { + pbe_eq = &phwi_context->be_eq[i]; + INIT_WORK(&pbe_eq->work_cqs, + beiscsi_process_all_cqs); + } + } else { + pbe_eq = &phwi_context->be_eq[0]; + INIT_WORK(&pbe_eq->work_cqs, + beiscsi_process_all_cqs); + } } + ret = beiscsi_init_irqs(phba); if (ret < 0) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, @@ -4637,6 +4964,9 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev, "iSCSI boot info.\n"); beiscsi_create_def_ifaces(phba); + schedule_delayed_work(&phba->beiscsi_hw_check_task, + msecs_to_jiffies(1000)); + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, "\n\n\n BM_%d : SUCCESS - DRIVER LOADED\n\n\n"); return 0; @@ -4652,15 +4982,6 @@ free_twq: beiscsi_clean_port(phba); beiscsi_free_mem(phba); free_port: - real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE; - - value = readl((void *)real_offset); - - if (value & 0x00010000) { - value &= 0xfffeffff; - writel(value, (void *)real_offset); - } - pci_free_consistent(phba->pcidev, phba->ctrl.mbox_mem_alloced.size, phba->ctrl.mbox_mem_alloced.va, diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h index b891226..5946577 100644 --- a/drivers/scsi/be2iscsi/be_main.h +++ b/drivers/scsi/be2iscsi/be_main.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -36,12 +36,13 @@ #include "be.h" #define DRV_NAME "be2iscsi" -#define BUILD_STR "4.4.58.0" +#define BUILD_STR "10.0.272.0" #define BE_NAME "Emulex OneConnect" \ "Open-iSCSI Driver version" BUILD_STR #define DRV_DESC BE_NAME " " "Driver" #define BE_VENDOR_ID 0x19A2 +#define ELX_VENDOR_ID 0x10DF /* DEVICE ID's for BE2 */ #define BE_DEVICE_ID1 0x212 #define OC_DEVICE_ID1 0x702 @@ -51,6 +52,9 @@ #define BE_DEVICE_ID2 0x222 #define OC_DEVICE_ID3 0x712 +/* DEVICE ID for SKH */ +#define OC_SKH_ID1 0x722 + #define BE2_IO_DEPTH 1024 #define BE2_MAX_SESSIONS 256 #define BE2_CMDS_PER_CXN 128 @@ -60,7 +64,11 @@ #define BE2_DEFPDU_HDR_SZ 64 #define BE2_DEFPDU_DATA_SZ 8192 -#define MAX_CPUS 31 +#define MAX_CPUS 64 +#define BEISCSI_MAX_NUM_CPUS 7 +#define OC_SKH_MAX_NUM_CPUS 63 + + #define BEISCSI_SGLIST_ELEMENTS 30 #define BEISCSI_CMD_PER_LUN 128 /* scsi_host->cmd_per_lun */ @@ -257,6 +265,7 @@ struct invalidate_command_table { unsigned short cid; } __packed; +#define chip_skh_r(pdev) (pdev->device == OC_SKH_ID1) struct beiscsi_hba { struct hba_parameters params; struct hwi_controller *phwi_ctrlr; @@ -270,12 +279,11 @@ struct beiscsi_hba { struct be_bus_address pci_pa; /* CSR */ /* PCI representation of our HBA */ struct pci_dev *pcidev; - unsigned int state; unsigned short asic_revision; unsigned int num_cpus; unsigned int nxt_cqid; - struct msix_entry msix_entries[MAX_CPUS + 1]; - char *msi_name[MAX_CPUS + 1]; + struct msix_entry msix_entries[MAX_CPUS]; + char *msi_name[MAX_CPUS]; bool msix_enabled; struct be_mem_descriptor *init_mem; @@ -325,12 +333,14 @@ struct beiscsi_hba { spinlock_t cid_lock; } fw_config; + unsigned int state; + bool fw_timeout; + bool ue_detected; + struct delayed_work beiscsi_hw_check_task; + u8 mac_address[ETH_ALEN]; - unsigned short todo_cq; - unsigned short todo_mcc_cq; char wq_name[20]; struct workqueue_struct *wq; /* The actuak work queue */ - struct work_struct work_cqs; /* The work being queued */ struct be_ctrl_info ctrl; unsigned int generation; unsigned int interface_handle; @@ -338,7 +348,10 @@ struct beiscsi_hba { struct invalidate_command_table inv_tbl[128]; unsigned int attr_log_enable; - + int (*iotask_fn)(struct iscsi_task *, + struct scatterlist *sg, + uint32_t num_sg, uint32_t xferlen, + uint32_t writedir); }; struct beiscsi_session { @@ -410,6 +423,9 @@ struct beiscsi_io_task { struct be_cmd_bhs *cmd_bhs; struct be_bus_address bhs_pa; unsigned short bhs_len; + dma_addr_t mtask_addr; + uint32_t mtask_data_count; + uint8_t wrb_type; }; struct be_nonio_bhs { @@ -457,6 +473,9 @@ struct beiscsi_offload_params { #define OFFLD_PARAMS_HDE 0x00000008 #define OFFLD_PARAMS_IR2T 0x00000010 #define OFFLD_PARAMS_IMD 0x00000020 +#define OFFLD_PARAMS_DATA_SEQ_INORDER 0x00000040 +#define OFFLD_PARAMS_PDU_SEQ_INORDER 0x00000080 +#define OFFLD_PARAMS_MAX_R2T 0x00FFFF00 /** * Pseudo amap definition in which each bit of the actual structure is defined @@ -471,7 +490,10 @@ struct amap_beiscsi_offload_params { u8 hde[1]; u8 ir2t[1]; u8 imd[1]; - u8 pad[26]; + u8 data_seq_inorder[1]; + u8 pdu_seq_inorder[1]; + u8 max_r2t[16]; + u8 pad[8]; u8 exp_statsn[32]; }; @@ -569,6 +591,20 @@ struct amap_i_t_dpdu_cqe { u8 valid; } __packed; +struct amap_i_t_dpdu_cqe_v2 { + u8 db_addr_hi[32]; /* DWORD 0 */ + u8 db_addr_lo[32]; /* DWORD 1 */ + u8 code[6]; /* DWORD 2 */ + u8 num_cons; /* DWORD 2*/ + u8 rsvd0[8]; /* DWORD 2 */ + u8 dpl[17]; /* DWORD 2 */ + u8 index[16]; /* DWORD 3 */ + u8 cid[13]; /* DWORD 3 */ + u8 rsvd1; /* DWORD 3 */ + u8 final; /* DWORD 3 */ + u8 valid; /* DWORD 3 */ +} __packed; + #define CQE_VALID_MASK 0x80000000 #define CQE_CODE_MASK 0x0000003F #define CQE_CID_MASK 0x0000FFC0 @@ -617,6 +653,11 @@ struct iscsi_wrb { } __packed; #define WRB_TYPE_MASK 0xF0000000 +#define SKH_WRB_TYPE_OFFSET 27 +#define BE_WRB_TYPE_OFFSET 28 + +#define ADAPTER_SET_WRB_TYPE(pwrb, wrb_type, type_offset) \ + (pwrb->dw[0] |= (wrb_type << type_offset)) /** * Pseudo amap definition in which each bit of the actual structure is defined @@ -663,12 +704,57 @@ struct amap_iscsi_wrb { } __packed; +struct amap_iscsi_wrb_v2 { + u8 r2t_exp_dtl[25]; /* DWORD 0 */ + u8 rsvd0[2]; /* DWORD 0*/ + u8 type[5]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 wrb_idx[8]; /* DWORD 1 */ + u8 lun[16]; /* DWORD 1 */ + u8 sgl_idx[16]; /* DWORD 2 */ + u8 ref_sgl_icd_idx[16]; /* DWORD 2 */ + u8 exp_data_sn[32]; /* DWORD 3 */ + u8 iscsi_bhs_addr_hi[32]; /* DWORD 4 */ + u8 iscsi_bhs_addr_lo[32]; /* DWORD 5 */ + u8 cq_id[16]; /* DWORD 6 */ + u8 rsvd1[16]; /* DWORD 6 */ + u8 cmdsn_itt[32]; /* DWORD 7 */ + u8 sge0_addr_hi[32]; /* DWORD 8 */ + u8 sge0_addr_lo[32]; /* DWORD 9 */ + u8 sge0_offset[24]; /* DWORD 10 */ + u8 rsvd2[7]; /* DWORD 10 */ + u8 sge0_last; /* DWORD 10 */ + u8 sge0_len[17]; /* DWORD 11 */ + u8 rsvd3[7]; /* DWORD 11 */ + u8 diff_enbl; /* DWORD 11 */ + u8 u_run; /* DWORD 11 */ + u8 o_run; /* DWORD 11 */ + u8 invalid; /* DWORD 11 */ + u8 dsp; /* DWORD 11 */ + u8 dmsg; /* DWORD 11 */ + u8 rsvd4; /* DWORD 11 */ + u8 lt; /* DWORD 11 */ + u8 sge1_addr_hi[32]; /* DWORD 12 */ + u8 sge1_addr_lo[32]; /* DWORD 13 */ + u8 sge1_r2t_offset[24]; /* DWORD 14 */ + u8 rsvd5[7]; /* DWORD 14 */ + u8 sge1_last; /* DWORD 14 */ + u8 sge1_len[17]; /* DWORD 15 */ + u8 rsvd6[15]; /* DWORD 15 */ +} __packed; + + struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid); void free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle); void beiscsi_process_all_cqs(struct work_struct *work); +static inline bool beiscsi_error(struct beiscsi_hba *phba) +{ + return phba->ue_detected || phba->fw_timeout; +} + struct pdu_nop_out { u32 dw[12]; }; @@ -728,6 +814,7 @@ struct iscsi_target_context_update_wrb { * Pseudo amap definition in which each bit of the actual structure is defined * as a byte: used to calculate offset/shift/mask of each field */ +#define BE_TGT_CTX_UPDT_CMD 0x07 struct amap_iscsi_target_context_update_wrb { u8 lun[14]; /* DWORD 0 */ u8 lt; /* DWORD 0 */ @@ -773,6 +860,47 @@ struct amap_iscsi_target_context_update_wrb { } __packed; +#define BEISCSI_MAX_RECV_DATASEG_LEN (64 * 1024) +#define BEISCSI_MAX_CXNS 1 +struct amap_iscsi_target_context_update_wrb_v2 { + u8 max_burst_length[24]; /* DWORD 0 */ + u8 rsvd0[3]; /* DWORD 0 */ + u8 type[5]; /* DWORD 0 */ + u8 ptr2nextwrb[8]; /* DWORD 1 */ + u8 wrb_idx[8]; /* DWORD 1 */ + u8 rsvd1[16]; /* DWORD 1 */ + u8 max_send_data_segment_length[24]; /* DWORD 2 */ + u8 rsvd2[8]; /* DWORD 2 */ + u8 first_burst_length[24]; /* DWORD 3 */ + u8 rsvd3[8]; /* DOWRD 3 */ + u8 max_r2t[16]; /* DWORD 4 */ + u8 rsvd4[10]; /* DWORD 4 */ + u8 hde; /* DWORD 4 */ + u8 dde; /* DWORD 4 */ + u8 erl[2]; /* DWORD 4 */ + u8 imd; /* DWORD 4 */ + u8 ir2t; /* DWORD 4 */ + u8 stat_sn[32]; /* DWORD 5 */ + u8 rsvd5[32]; /* DWORD 6 */ + u8 rsvd6[32]; /* DWORD 7 */ + u8 max_recv_dataseg_len[24]; /* DWORD 8 */ + u8 rsvd7[8]; /* DWORD 8 */ + u8 rsvd8[32]; /* DWORD 9 */ + u8 rsvd9[32]; /* DWORD 10 */ + u8 max_cxns[16]; /* DWORD 11 */ + u8 rsvd10[11]; /* DWORD 11*/ + u8 invld; /* DWORD 11 */ + u8 rsvd11;/* DWORD 11*/ + u8 dmsg; /* DWORD 11 */ + u8 data_seq_inorder; /* DWORD 11 */ + u8 pdu_seq_inorder; /* DWORD 11 */ + u8 rsvd12[32]; /*DWORD 12 */ + u8 rsvd13[32]; /* DWORD 13 */ + u8 rsvd14[32]; /* DWORD 14 */ + u8 rsvd15[32]; /* DWORD 15 */ +} __packed; + + struct be_ring { u32 pages; /* queue size in pages */ u32 id; /* queue id assigned by beklib */ @@ -837,7 +965,7 @@ struct hwi_context_memory { u16 max_eqd; /* in usecs */ u16 cur_eqd; /* in usecs */ struct be_eq_obj be_eq[MAX_CPUS]; - struct be_queue_info be_cq[MAX_CPUS]; + struct be_queue_info be_cq[MAX_CPUS - 1]; struct be_queue_info be_def_hdrq; struct be_queue_info be_def_dataq; diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c index aab5dd3..a6c2fe4 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.c +++ b/drivers/scsi/be2iscsi/be_mgmt.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -22,6 +22,138 @@ #include <scsi/scsi_bsg_iscsi.h> #include "be_mgmt.h" #include "be_iscsi.h" +#include "be_main.h" + +/* UE Status Low CSR */ +static const char * const desc_ue_status_low[] = { + "CEV", + "CTX", + "DBUF", + "ERX", + "Host", + "MPU", + "NDMA", + "PTC ", + "RDMA ", + "RXF ", + "RXIPS ", + "RXULP0 ", + "RXULP1 ", + "RXULP2 ", + "TIM ", + "TPOST ", + "TPRE ", + "TXIPS ", + "TXULP0 ", + "TXULP1 ", + "UC ", + "WDMA ", + "TXULP2 ", + "HOST1 ", + "P0_OB_LINK ", + "P1_OB_LINK ", + "HOST_GPIO ", + "MBOX ", + "AXGMAC0", + "AXGMAC1", + "JTAG", + "MPU_INTPEND" +}; + +/* UE Status High CSR */ +static const char * const desc_ue_status_hi[] = { + "LPCMEMHOST", + "MGMT_MAC", + "PCS0ONLINE", + "MPU_IRAM", + "PCS1ONLINE", + "PCTL0", + "PCTL1", + "PMEM", + "RR", + "TXPB", + "RXPP", + "XAUI", + "TXP", + "ARM", + "IPC", + "HOST2", + "HOST3", + "HOST4", + "HOST5", + "HOST6", + "HOST7", + "HOST8", + "HOST9", + "NETC", + "Unknown", + "Unknown", + "Unknown", + "Unknown", + "Unknown", + "Unknown", + "Unknown", + "Unknown" +}; + +/* + * beiscsi_ue_detec()- Detect Unrecoverable Error on adapter + * @phba: Driver priv structure + * + * Read registers linked to UE and check for the UE status + **/ +void beiscsi_ue_detect(struct beiscsi_hba *phba) +{ + uint32_t ue_hi = 0, ue_lo = 0; + uint32_t ue_mask_hi = 0, ue_mask_lo = 0; + uint8_t i = 0; + + if (phba->ue_detected) + return; + + pci_read_config_dword(phba->pcidev, + PCICFG_UE_STATUS_LOW, &ue_lo); + pci_read_config_dword(phba->pcidev, + PCICFG_UE_STATUS_MASK_LOW, + &ue_mask_lo); + pci_read_config_dword(phba->pcidev, + PCICFG_UE_STATUS_HIGH, + &ue_hi); + pci_read_config_dword(phba->pcidev, + PCICFG_UE_STATUS_MASK_HI, + &ue_mask_hi); + + ue_lo = (ue_lo & ~ue_mask_lo); + ue_hi = (ue_hi & ~ue_mask_hi); + + + if (ue_lo || ue_hi) { + phba->ue_detected = true; + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, + "BG_%d : Error detected on the adapter\n"); + } + + if (ue_lo) { + for (i = 0; ue_lo; ue_lo >>= 1, i++) { + if (ue_lo & 1) + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_CONFIG, + "BG_%d : UE_LOW %s bit set\n", + desc_ue_status_low[i]); + } + } + + if (ue_hi) { + for (i = 0; ue_hi; ue_hi >>= 1, i++) { + if (ue_hi & 1) + beiscsi_log(phba, KERN_ERR, + BEISCSI_LOG_CONFIG, + "BG_%d : UE_HIGH %s bit set\n", + desc_ue_status_hi[i]); + } + } +} /** * mgmt_reopen_session()- Reopen a session based on reopen_type @@ -575,13 +707,20 @@ unsigned int mgmt_get_all_if_id(struct beiscsi_hba *phba) return status; } +/* + * mgmt_exec_nonemb_cmd()- Execute Non Embedded MBX Cmd + * @phba: Driver priv structure + * @nonemb_cmd: Address of the MBX command issued + * @resp_buf: Buffer to copy the MBX cmd response + * @resp_buf_len: respone lenght to be copied + * + **/ static int mgmt_exec_nonemb_cmd(struct beiscsi_hba *phba, struct be_dma_mem *nonemb_cmd, void *resp_buf, int resp_buf_len) { struct be_ctrl_info *ctrl = &phba->ctrl; struct be_mcc_wrb *wrb = wrb_from_mccq(phba); - unsigned short status, extd_status; struct be_sge *sge; unsigned int tag; int rc = 0; @@ -599,31 +738,25 @@ static int mgmt_exec_nonemb_cmd(struct beiscsi_hba *phba, be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1); sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma)); - sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF); + sge->pa_lo = cpu_to_le32(lower_32_bits(nonemb_cmd->dma)); sge->len = cpu_to_le32(nonemb_cmd->size); be_mcc_notify(phba); spin_unlock(&ctrl->mbox_lock); - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - if (status || extd_status) { + rc = beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd->va); + if (rc) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, - "BG_%d : mgmt_exec_nonemb_cmd Failed status = %d" - "extd_status = %d\n", status, extd_status); + "BG_%d : mgmt_exec_nonemb_cmd Failed status\n"); + rc = -EIO; - goto free_tag; + goto free_cmd; } if (resp_buf) memcpy(resp_buf, nonemb_cmd->va, resp_buf_len); -free_tag: - free_mcc_tag(&phba->ctrl, tag); free_cmd: pci_free_consistent(ctrl->pdev, nonemb_cmd->size, nonemb_cmd->va, nonemb_cmd->dma); @@ -1009,10 +1142,9 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba, { struct be_cmd_get_boot_target_resp *boot_resp; struct be_mcc_wrb *wrb; - unsigned int tag, wrb_num; + unsigned int tag; uint8_t boot_retry = 3; - unsigned short status, extd_status; - struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; + int rc; do { /* Get the Boot Target Session Handle and Count*/ @@ -1022,24 +1154,16 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba, BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT, "BG_%d : Getting Boot Target Info Failed\n"); return -EAGAIN; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - if (status || extd_status) { + } + + rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); + if (rc) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, - "BG_%d : mgmt_get_boot_target Failed" - " status = %d extd_status = %d\n", - status, extd_status); - free_mcc_tag(&phba->ctrl, tag); + "BG_%d : MBX CMD get_boot_target Failed\n"); return -EBUSY; } - wrb = queue_get_wrb(mccq, wrb_num); - free_mcc_tag(&phba->ctrl, tag); + boot_resp = embedded_payload(wrb); /* Check if the there are any Boot targets configured */ @@ -1064,24 +1188,15 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba, BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, "BG_%d : mgmt_reopen_session Failed\n"); return -EAGAIN; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; - if (status || extd_status) { + } + + rc = beiscsi_mccq_compl(phba, tag, NULL, NULL); + if (rc) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, - "BG_%d : mgmt_reopen_session Failed" - " status = %d extd_status = %d\n", - status, extd_status); - free_mcc_tag(&phba->ctrl, tag); - return -EBUSY; + "BG_%d : mgmt_reopen_session Failed"); + return rc; } - free_mcc_tag(&phba->ctrl, tag); - } while (--boot_retry); /* Couldn't log into the boot target */ @@ -1106,8 +1221,9 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba, int mgmt_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag) { - unsigned int tag, wrb_num; - unsigned short status, extd_status; + int rc; + unsigned int tag; + struct be_mcc_wrb *wrb = NULL; tag = be_cmd_set_vlan(phba, vlan_tag); if (!tag) { @@ -1115,24 +1231,208 @@ int mgmt_set_vlan(struct beiscsi_hba *phba, (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX), "BG_%d : VLAN Setting Failed\n"); return -EBUSY; - } else - wait_event_interruptible(phba->ctrl.mcc_wait[tag], - phba->ctrl.mcc_numtag[tag]); - - wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16; - extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8; - status = phba->ctrl.mcc_numtag[tag] & 0x000000FF; + } - if (status || extd_status) { + rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); + if (rc) { beiscsi_log(phba, KERN_ERR, (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX), - "BS_%d : status : %d extd_status : %d\n", - status, extd_status); + "BS_%d : VLAN MBX Cmd Failed\n"); + return rc; + } + return rc; +} - free_mcc_tag(&phba->ctrl, tag); - return -EAGAIN; +/** + * beiscsi_drvr_ver_disp()- Display the driver Name and Version + * @dev: ptr to device not used. + * @attr: device attribute, not used. + * @buf: contains formatted text driver name and version + * + * return + * size of the formatted string + **/ +ssize_t +beiscsi_drvr_ver_disp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, BE_NAME "\n"); +} + +/** + * beiscsi_adap_family_disp()- Display adapter family. + * @dev: ptr to device to get priv structure + * @attr: device attribute, not used. + * @buf: contains formatted text driver name and version + * + * return + * size of the formatted string + **/ +ssize_t +beiscsi_adap_family_disp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + uint16_t dev_id = 0; + struct Scsi_Host *shost = class_to_shost(dev); + struct beiscsi_hba *phba = iscsi_host_priv(shost); + + dev_id = phba->pcidev->device; + switch (dev_id) { + case BE_DEVICE_ID1: + case OC_DEVICE_ID1: + case OC_DEVICE_ID2: + return snprintf(buf, PAGE_SIZE, "BE2 Adapter Family\n"); + break; + case BE_DEVICE_ID2: + case OC_DEVICE_ID3: + return snprintf(buf, PAGE_SIZE, "BE3-R Adapter Family\n"); + break; + case OC_SKH_ID1: + return snprintf(buf, PAGE_SIZE, "Skyhawk-R Adapter Family\n"); + break; + default: + return snprintf(buf, PAGE_SIZE, + "Unkown Adapter Family: 0x%x\n", dev_id); + break; } +} - free_mcc_tag(&phba->ctrl, tag); - return 0; + +void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params, + struct wrb_handle *pwrb_handle, + struct be_mem_descriptor *mem_descr) +{ + struct iscsi_wrb *pwrb = pwrb_handle->pwrb; + + memset(pwrb, 0, sizeof(*pwrb)); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + max_send_data_segment_length, pwrb, + params->dw[offsetof(struct amap_beiscsi_offload_params, + max_send_data_segment_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb, + BE_TGT_CTX_UPDT_CMD); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + first_burst_length, + pwrb, + params->dw[offsetof(struct amap_beiscsi_offload_params, + first_burst_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + erl) / 32] & OFFLD_PARAMS_ERL)); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + dde) / 32] & OFFLD_PARAMS_DDE) >> 2); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + hde) / 32] & OFFLD_PARAMS_HDE) >> 3); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + imd) / 32] & OFFLD_PARAMS_IMD) >> 5); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn, + pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + exp_statsn) / 32] + 1)); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx, + pwrb, pwrb_handle->wrb_index); + + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + max_burst_length, pwrb, params->dw[offsetof + (struct amap_beiscsi_offload_params, + max_burst_length) / 32]); + + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb, + pwrb, pwrb_handle->nxt_wrb_index); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + session_state, pwrb, 0); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack, + pwrb, 1); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq, + pwrb, 0); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb, + 0); + + mem_descr += ISCSI_MEM_GLOBAL_HEADER; + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + pad_buffer_addr_hi, pwrb, + mem_descr->mem_array[0].bus_address.u.a32.address_hi); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + pad_buffer_addr_lo, pwrb, + mem_descr->mem_array[0].bus_address.u.a32.address_lo); +} + +void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params, + struct wrb_handle *pwrb_handle) +{ + struct iscsi_wrb *pwrb = pwrb_handle->pwrb; + + memset(pwrb, 0, sizeof(*pwrb)); + + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, + max_burst_length, pwrb, params->dw[offsetof + (struct amap_beiscsi_offload_params, + max_burst_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + max_burst_length, pwrb, params->dw[offsetof + (struct amap_beiscsi_offload_params, + max_burst_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + type, pwrb, + BE_TGT_CTX_UPDT_CMD); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + ptr2nextwrb, + pwrb, pwrb_handle->nxt_wrb_index); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, wrb_idx, + pwrb, pwrb_handle->wrb_index); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + max_send_data_segment_length, pwrb, + params->dw[offsetof(struct amap_beiscsi_offload_params, + max_send_data_segment_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + first_burst_length, pwrb, + params->dw[offsetof(struct amap_beiscsi_offload_params, + first_burst_length) / 32]); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + max_recv_dataseg_len, pwrb, BEISCSI_MAX_RECV_DATASEG_LEN); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + max_cxns, pwrb, BEISCSI_MAX_CXNS); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, erl, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + erl) / 32] & OFFLD_PARAMS_ERL)); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, dde, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + dde) / 32] & OFFLD_PARAMS_DDE) >> 2); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, hde, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + hde) / 32] & OFFLD_PARAMS_HDE) >> 3); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + ir2t, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, imd, pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + imd) / 32] & OFFLD_PARAMS_IMD) >> 5); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + data_seq_inorder, + pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + data_seq_inorder) / 32] & + OFFLD_PARAMS_DATA_SEQ_INORDER) >> 6); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, + pdu_seq_inorder, + pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + pdu_seq_inorder) / 32] & + OFFLD_PARAMS_PDU_SEQ_INORDER) >> 7); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, max_r2t, + pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + max_r2t) / 32] & + OFFLD_PARAMS_MAX_R2T) >> 8); + AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, stat_sn, + pwrb, + (params->dw[offsetof(struct amap_beiscsi_offload_params, + exp_statsn) / 32] + 1)); } diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h index c50cef6..2e4968a 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.h +++ b/drivers/scsi/be2iscsi/be_mgmt.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2011 Emulex + * Copyright (C) 2005 - 2012 Emulex * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -30,6 +30,12 @@ #define IP_V6_LEN 16 #define IP_V4_LEN 4 +/* UE Status and Mask register */ +#define PCICFG_UE_STATUS_LOW 0xA0 +#define PCICFG_UE_STATUS_HIGH 0xA4 +#define PCICFG_UE_STATUS_MASK_LOW 0xA8 +#define PCICFG_UE_STATUS_MASK_HI 0xAC + /** * Pseudo amap definition in which each bit of the actual structure is defined * as a byte: used to calculate offset/shift/mask of each field @@ -301,4 +307,19 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba, unsigned int mgmt_get_all_if_id(struct beiscsi_hba *phba); int mgmt_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag); + +ssize_t beiscsi_drvr_ver_disp(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t beiscsi_adap_family_disp(struct device *dev, + struct device_attribute *attr, char *buf); + +void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params, + struct wrb_handle *pwrb_handle, + struct be_mem_descriptor *mem_descr); + +void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params, + struct wrb_handle *pwrb_handle); +void beiscsi_ue_detect(struct beiscsi_hba *phba); + #endif diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index 3f9e706..b44d04e 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -800,7 +800,7 @@ extern struct device_attribute *bnx2i_dev_attributes[]; /* * Function Prototypes */ -extern void bnx2i_identify_device(struct bnx2i_hba *hba); +extern void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev); extern void bnx2i_ulp_init(struct cnic_dev *dev); extern void bnx2i_ulp_exit(struct cnic_dev *dev); diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index b17637a..ee009e4ad 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -79,42 +79,33 @@ static struct notifier_block bnx2i_cpu_notifier = { /** * bnx2i_identify_device - identifies NetXtreme II device type * @hba: Adapter structure pointer + * @cnic: Corresponding cnic device * * This function identifies the NX2 device type and sets appropriate * queue mailbox register access method, 5709 requires driver to * access MBOX regs using *bin* mode */ -void bnx2i_identify_device(struct bnx2i_hba *hba) +void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev) { hba->cnic_dev_type = 0; - if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) || - (hba->pci_did == PCI_DEVICE_ID_NX2_5706S)) - set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type); - else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) || - (hba->pci_did == PCI_DEVICE_ID_NX2_5708S)) - set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type); - else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) || - (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) { - set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); - hba->mail_queue_access = BNX2I_MQ_BIN_MODE; - } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 || - hba->pci_did == PCI_DEVICE_ID_NX2_57711 || - hba->pci_did == PCI_DEVICE_ID_NX2_57711E || - hba->pci_did == PCI_DEVICE_ID_NX2_57712 || - hba->pci_did == PCI_DEVICE_ID_NX2_57712E || - hba->pci_did == PCI_DEVICE_ID_NX2_57800 || - hba->pci_did == PCI_DEVICE_ID_NX2_57800_MF || - hba->pci_did == PCI_DEVICE_ID_NX2_57800_VF || - hba->pci_did == PCI_DEVICE_ID_NX2_57810 || - hba->pci_did == PCI_DEVICE_ID_NX2_57810_MF || - hba->pci_did == PCI_DEVICE_ID_NX2_57810_VF || - hba->pci_did == PCI_DEVICE_ID_NX2_57840 || - hba->pci_did == PCI_DEVICE_ID_NX2_57840_MF || - hba->pci_did == PCI_DEVICE_ID_NX2_57840_VF) + if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) { + if (hba->pci_did == PCI_DEVICE_ID_NX2_5706 || + hba->pci_did == PCI_DEVICE_ID_NX2_5706S) { + set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type); + } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5708 || + hba->pci_did == PCI_DEVICE_ID_NX2_5708S) { + set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type); + } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5709 || + hba->pci_did == PCI_DEVICE_ID_NX2_5709S) { + set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); + hba->mail_queue_access = BNX2I_MQ_BIN_MODE; + } + } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) { set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type); - else + } else { printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", hba->pci_did); + } } diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 3b34c13..0056e47 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -808,7 +808,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) hba->pci_func = PCI_FUNC(hba->pcidev->devfn); hba->pci_devno = PCI_SLOT(hba->pcidev->devfn); - bnx2i_identify_device(hba); + bnx2i_identify_device(hba, cnic); bnx2i_setup_host_queue_size(hba, shost); hba->reg_base = pci_resource_start(hba->pcidev, 0); diff --git a/drivers/scsi/csiostor/Kconfig b/drivers/scsi/csiostor/Kconfig new file mode 100644 index 0000000..4d03b03 --- /dev/null +++ b/drivers/scsi/csiostor/Kconfig @@ -0,0 +1,19 @@ +config SCSI_CHELSIO_FCOE + tristate "Chelsio Communications FCoE support" + depends on PCI && SCSI + select SCSI_FC_ATTRS + select FW_LOADER + help + This driver supports FCoE Offload functionality over + Chelsio T4-based 10Gb Converged Network Adapters. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.html>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module choose M here; the module + will be called csiostor. diff --git a/drivers/scsi/csiostor/Makefile b/drivers/scsi/csiostor/Makefile new file mode 100644 index 0000000..b581966 --- /dev/null +++ b/drivers/scsi/csiostor/Makefile @@ -0,0 +1,11 @@ +# +## Chelsio FCoE driver +# +## + +ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4 + +obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor.o + +csiostor-objs := csio_attr.o csio_init.o csio_lnode.o csio_scsi.o \ + csio_hw.o csio_isr.o csio_mb.o csio_rnode.o csio_wr.o diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c new file mode 100644 index 0000000..065a87a --- /dev/null +++ b/drivers/scsi/csiostor/csio_attr.c @@ -0,0 +1,796 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/mm.h> +#include <linux/jiffies.h> +#include <scsi/fc/fc_fs.h> + +#include "csio_init.h" + +static void +csio_vport_set_state(struct csio_lnode *ln); + +/* + * csio_reg_rnode - Register a remote port with FC transport. + * @rn: Rnode representing remote port. + * + * Call fc_remote_port_add() to register this remote port with FC transport. + * If remote port is Initiator OR Target OR both, change the role appropriately. + * + */ +void +csio_reg_rnode(struct csio_rnode *rn) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + struct Scsi_Host *shost = csio_ln_to_shost(ln); + struct fc_rport_identifiers ids; + struct fc_rport *rport; + struct csio_service_parms *sp; + + ids.node_name = wwn_to_u64(csio_rn_wwnn(rn)); + ids.port_name = wwn_to_u64(csio_rn_wwpn(rn)); + ids.port_id = rn->nport_id; + ids.roles = FC_RPORT_ROLE_UNKNOWN; + + if (rn->role & CSIO_RNFR_INITIATOR || rn->role & CSIO_RNFR_TARGET) { + rport = rn->rport; + CSIO_ASSERT(rport != NULL); + goto update_role; + } + + rn->rport = fc_remote_port_add(shost, 0, &ids); + if (!rn->rport) { + csio_ln_err(ln, "Failed to register rport = 0x%x.\n", + rn->nport_id); + return; + } + + ln->num_reg_rnodes++; + rport = rn->rport; + spin_lock_irq(shost->host_lock); + *((struct csio_rnode **)rport->dd_data) = rn; + spin_unlock_irq(shost->host_lock); + + sp = &rn->rn_sparm; + rport->maxframe_size = ntohs(sp->csp.sp_bb_data); + if (ntohs(sp->clsp[2].cp_class) & FC_CPC_VALID) + rport->supported_classes = FC_COS_CLASS3; + else + rport->supported_classes = FC_COS_UNSPECIFIED; +update_role: + if (rn->role & CSIO_RNFR_INITIATOR) + ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (rn->role & CSIO_RNFR_TARGET) + ids.roles |= FC_RPORT_ROLE_FCP_TARGET; + + if (ids.roles != FC_RPORT_ROLE_UNKNOWN) + fc_remote_port_rolechg(rport, ids.roles); + + rn->scsi_id = rport->scsi_target_id; + + csio_ln_dbg(ln, "Remote port x%x role 0x%x registered\n", + rn->nport_id, ids.roles); +} + +/* + * csio_unreg_rnode - Unregister a remote port with FC transport. + * @rn: Rnode representing remote port. + * + * Call fc_remote_port_delete() to unregister this remote port with FC + * transport. + * + */ +void +csio_unreg_rnode(struct csio_rnode *rn) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + struct fc_rport *rport = rn->rport; + + rn->role &= ~(CSIO_RNFR_INITIATOR | CSIO_RNFR_TARGET); + fc_remote_port_delete(rport); + ln->num_reg_rnodes--; + + csio_ln_dbg(ln, "Remote port x%x un-registered\n", rn->nport_id); +} + +/* + * csio_lnode_async_event - Async events from local port. + * @ln: lnode representing local port. + * + * Async events from local node that FC transport/SCSI ML + * should be made aware of (Eg: RSCN). + */ +void +csio_lnode_async_event(struct csio_lnode *ln, enum csio_ln_fc_evt fc_evt) +{ + switch (fc_evt) { + case CSIO_LN_FC_RSCN: + /* Get payload of rscn from ln */ + /* For each RSCN entry */ + /* + * fc_host_post_event(shost, + * fc_get_event_number(), + * FCH_EVT_RSCN, + * rscn_entry); + */ + break; + case CSIO_LN_FC_LINKUP: + /* send fc_host_post_event */ + /* set vport state */ + if (csio_is_npiv_ln(ln)) + csio_vport_set_state(ln); + + break; + case CSIO_LN_FC_LINKDOWN: + /* send fc_host_post_event */ + /* set vport state */ + if (csio_is_npiv_ln(ln)) + csio_vport_set_state(ln); + + break; + case CSIO_LN_FC_ATTRIB_UPDATE: + csio_fchost_attr_init(ln); + break; + default: + break; + } +} + +/* + * csio_fchost_attr_init - Initialize FC transport attributes + * @ln: Lnode. + * + */ +void +csio_fchost_attr_init(struct csio_lnode *ln) +{ + struct Scsi_Host *shost = csio_ln_to_shost(ln); + + fc_host_node_name(shost) = wwn_to_u64(csio_ln_wwnn(ln)); + fc_host_port_name(shost) = wwn_to_u64(csio_ln_wwpn(ln)); + + fc_host_supported_classes(shost) = FC_COS_CLASS3; + fc_host_max_npiv_vports(shost) = + (csio_lnode_to_hw(ln))->fres_info.max_vnps; + fc_host_supported_speeds(shost) = FC_PORTSPEED_10GBIT | + FC_PORTSPEED_1GBIT; + + fc_host_maxframe_size(shost) = ntohs(ln->ln_sparm.csp.sp_bb_data); + memset(fc_host_supported_fc4s(shost), 0, + sizeof(fc_host_supported_fc4s(shost))); + fc_host_supported_fc4s(shost)[7] = 1; + + memset(fc_host_active_fc4s(shost), 0, + sizeof(fc_host_active_fc4s(shost))); + fc_host_active_fc4s(shost)[7] = 1; +} + +/* + * csio_get_host_port_id - sysfs entries for nport_id is + * populated/cached from this function + */ +static void +csio_get_host_port_id(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + spin_lock_irq(&hw->lock); + fc_host_port_id(shost) = ln->nport_id; + spin_unlock_irq(&hw->lock); +} + +/* + * csio_get_port_type - Return FC local port type. + * @shost: scsi host. + * + */ +static void +csio_get_host_port_type(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + spin_lock_irq(&hw->lock); + if (csio_is_npiv_ln(ln)) + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + else + fc_host_port_type(shost) = FC_PORTTYPE_NPORT; + spin_unlock_irq(&hw->lock); +} + +/* + * csio_get_port_state - Return FC local port state. + * @shost: scsi host. + * + */ +static void +csio_get_host_port_state(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_hw *hw = csio_lnode_to_hw(ln); + char state[16]; + + spin_lock_irq(&hw->lock); + + csio_lnode_state_to_str(ln, state); + if (!strcmp(state, "READY")) + fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; + else if (!strcmp(state, "OFFLINE")) + fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; + else + fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; + + spin_unlock_irq(&hw->lock); +} + +/* + * csio_get_host_speed - Return link speed to FC transport. + * @shost: scsi host. + * + */ +static void +csio_get_host_speed(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + spin_lock_irq(&hw->lock); + switch (hw->pport[ln->portid].link_speed) { + case FW_PORT_CAP_SPEED_1G: + fc_host_speed(shost) = FC_PORTSPEED_1GBIT; + break; + case FW_PORT_CAP_SPEED_10G: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + default: + fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; + break; + } + spin_unlock_irq(&hw->lock); +} + +/* + * csio_get_host_fabric_name - Return fabric name + * @shost: scsi host. + * + */ +static void +csio_get_host_fabric_name(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_rnode *rn = NULL; + struct csio_hw *hw = csio_lnode_to_hw(ln); + + spin_lock_irq(&hw->lock); + rn = csio_rnode_lookup_portid(ln, FC_FID_FLOGI); + if (rn) + fc_host_fabric_name(shost) = wwn_to_u64(csio_rn_wwnn(rn)); + else + fc_host_fabric_name(shost) = 0; + spin_unlock_irq(&hw->lock); +} + +/* + * csio_get_host_speed - Return FC transport statistics. + * @ln: Lnode. + * + */ +static struct fc_host_statistics * +csio_get_stats(struct Scsi_Host *shost) +{ + struct csio_lnode *ln = shost_priv(shost); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct fc_host_statistics *fhs = &ln->fch_stats; + struct fw_fcoe_port_stats fcoe_port_stats; + uint64_t seconds; + + memset(&fcoe_port_stats, 0, sizeof(struct fw_fcoe_port_stats)); + csio_get_phy_port_stats(hw, ln->portid, &fcoe_port_stats); + + fhs->tx_frames += (be64_to_cpu(fcoe_port_stats.tx_bcast_frames) + + be64_to_cpu(fcoe_port_stats.tx_mcast_frames) + + be64_to_cpu(fcoe_port_stats.tx_ucast_frames) + + be64_to_cpu(fcoe_port_stats.tx_offload_frames)); + fhs->tx_words += (be64_to_cpu(fcoe_port_stats.tx_bcast_bytes) + + be64_to_cpu(fcoe_port_stats.tx_mcast_bytes) + + be64_to_cpu(fcoe_port_stats.tx_ucast_bytes) + + be64_to_cpu(fcoe_port_stats.tx_offload_bytes)) / + CSIO_WORD_TO_BYTE; + fhs->rx_frames += (be64_to_cpu(fcoe_port_stats.rx_bcast_frames) + + be64_to_cpu(fcoe_port_stats.rx_mcast_frames) + + be64_to_cpu(fcoe_port_stats.rx_ucast_frames)); + fhs->rx_words += (be64_to_cpu(fcoe_port_stats.rx_bcast_bytes) + + be64_to_cpu(fcoe_port_stats.rx_mcast_bytes) + + be64_to_cpu(fcoe_port_stats.rx_ucast_bytes)) / + CSIO_WORD_TO_BYTE; + fhs->error_frames += be64_to_cpu(fcoe_port_stats.rx_err_frames); + fhs->fcp_input_requests += ln->stats.n_input_requests; + fhs->fcp_output_requests += ln->stats.n_output_requests; + fhs->fcp_control_requests += ln->stats.n_control_requests; + fhs->fcp_input_megabytes += ln->stats.n_input_bytes >> 20; + fhs->fcp_output_megabytes += ln->stats.n_output_bytes >> 20; + fhs->link_failure_count = ln->stats.n_link_down; + /* Reset stats for the device */ + seconds = jiffies_to_msecs(jiffies) - hw->stats.n_reset_start; + do_div(seconds, 1000); + fhs->seconds_since_last_reset = seconds; + + return fhs; +} + +/* + * csio_set_rport_loss_tmo - Set the rport dev loss timeout + * @rport: fc rport. + * @timeout: new value for dev loss tmo. + * + * If timeout is non zero set the dev_loss_tmo to timeout, else set + * dev_loss_tmo to one. + */ +static void +csio_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) +{ + if (timeout) + rport->dev_loss_tmo = timeout; + else + rport->dev_loss_tmo = 1; +} + +static void +csio_vport_set_state(struct csio_lnode *ln) +{ + struct fc_vport *fc_vport = ln->fc_vport; + struct csio_lnode *pln = ln->pln; + char state[16]; + + /* Set fc vport state based on phyiscal lnode */ + csio_lnode_state_to_str(pln, state); + if (strcmp(state, "READY")) { + fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); + return; + } + + if (!(pln->flags & CSIO_LNF_NPIVSUPP)) { + fc_vport_set_state(fc_vport, FC_VPORT_NO_FABRIC_SUPP); + return; + } + + /* Set fc vport state based on virtual lnode */ + csio_lnode_state_to_str(ln, state); + if (strcmp(state, "READY")) { + fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); + return; + } + fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE); +} + +static int +csio_fcoe_alloc_vnp(struct csio_hw *hw, struct csio_lnode *ln) +{ + struct csio_lnode *pln; + struct csio_mb *mbp; + struct fw_fcoe_vnp_cmd *rsp; + int ret = 0; + int retry = 0; + + /* Issue VNP cmd to alloc vport */ + /* Allocate Mbox request */ + spin_lock_irq(&hw->lock); + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + ret = -ENOMEM; + goto out; + } + + pln = ln->pln; + ln->fcf_flowid = pln->fcf_flowid; + ln->portid = pln->portid; + + csio_fcoe_vnp_alloc_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO, + pln->fcf_flowid, pln->vnp_flowid, 0, + csio_ln_wwnn(ln), csio_ln_wwpn(ln), NULL); + + for (retry = 0; retry < 3; retry++) { + /* FW is expected to complete vnp cmd in immediate mode + * without much delay. + * Otherwise, there will be increase in IO latency since HW + * lock is held till completion of vnp mbox cmd. + */ + ret = csio_mb_issue(hw, mbp); + if (ret != -EBUSY) + break; + + /* Retry if mbox returns busy */ + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + if (ret) { + csio_ln_err(ln, "Failed to issue mbox FCoE VNP command\n"); + goto out_free; + } + + /* Process Mbox response of VNP command */ + rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb); + if (FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)) != FW_SUCCESS) { + csio_ln_err(ln, "FCOE VNP ALLOC cmd returned 0x%x!\n", + FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16))); + ret = -EINVAL; + goto out_free; + } + + ln->vnp_flowid = FW_FCOE_VNP_CMD_VNPI_GET( + ntohl(rsp->gen_wwn_to_vnpi)); + memcpy(csio_ln_wwnn(ln), rsp->vnport_wwnn, 8); + memcpy(csio_ln_wwpn(ln), rsp->vnport_wwpn, 8); + + csio_ln_dbg(ln, "FCOE VNPI: 0x%x\n", ln->vnp_flowid); + csio_ln_dbg(ln, "\tWWNN: %x%x%x%x%x%x%x%x\n", + ln->ln_sparm.wwnn[0], ln->ln_sparm.wwnn[1], + ln->ln_sparm.wwnn[2], ln->ln_sparm.wwnn[3], + ln->ln_sparm.wwnn[4], ln->ln_sparm.wwnn[5], + ln->ln_sparm.wwnn[6], ln->ln_sparm.wwnn[7]); + csio_ln_dbg(ln, "\tWWPN: %x%x%x%x%x%x%x%x\n", + ln->ln_sparm.wwpn[0], ln->ln_sparm.wwpn[1], + ln->ln_sparm.wwpn[2], ln->ln_sparm.wwpn[3], + ln->ln_sparm.wwpn[4], ln->ln_sparm.wwpn[5], + ln->ln_sparm.wwpn[6], ln->ln_sparm.wwpn[7]); + +out_free: + mempool_free(mbp, hw->mb_mempool); +out: + spin_unlock_irq(&hw->lock); + return ret; +} + +static int +csio_fcoe_free_vnp(struct csio_hw *hw, struct csio_lnode *ln) +{ + struct csio_lnode *pln; + struct csio_mb *mbp; + struct fw_fcoe_vnp_cmd *rsp; + int ret = 0; + int retry = 0; + + /* Issue VNP cmd to free vport */ + /* Allocate Mbox request */ + + spin_lock_irq(&hw->lock); + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + ret = -ENOMEM; + goto out; + } + + pln = ln->pln; + + csio_fcoe_vnp_free_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO, + ln->fcf_flowid, ln->vnp_flowid, + NULL); + + for (retry = 0; retry < 3; retry++) { + ret = csio_mb_issue(hw, mbp); + if (ret != -EBUSY) + break; + + /* Retry if mbox returns busy */ + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + if (ret) { + csio_ln_err(ln, "Failed to issue mbox FCoE VNP command\n"); + goto out_free; + } + + /* Process Mbox response of VNP command */ + rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb); + if (FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)) != FW_SUCCESS) { + csio_ln_err(ln, "FCOE VNP FREE cmd returned 0x%x!\n", + FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16))); + ret = -EINVAL; + } + +out_free: + mempool_free(mbp, hw->mb_mempool); +out: + spin_unlock_irq(&hw->lock); + return ret; +} + +static int +csio_vport_create(struct fc_vport *fc_vport, bool disable) +{ + struct Scsi_Host *shost = fc_vport->shost; + struct csio_lnode *pln = shost_priv(shost); + struct csio_lnode *ln = NULL; + struct csio_hw *hw = csio_lnode_to_hw(pln); + uint8_t wwn[8]; + int ret = -1; + + ln = csio_shost_init(hw, &fc_vport->dev, false, pln); + if (!ln) + goto error; + + if (fc_vport->node_name != 0) { + u64_to_wwn(fc_vport->node_name, wwn); + + if (!CSIO_VALID_WWN(wwn)) { + csio_ln_err(ln, + "vport create failed. Invalid wwnn\n"); + goto error; + } + memcpy(csio_ln_wwnn(ln), wwn, 8); + } + + if (fc_vport->port_name != 0) { + u64_to_wwn(fc_vport->port_name, wwn); + + if (!CSIO_VALID_WWN(wwn)) { + csio_ln_err(ln, + "vport create failed. Invalid wwpn\n"); + goto error; + } + + if (csio_lnode_lookup_by_wwpn(hw, wwn)) { + csio_ln_err(ln, + "vport create failed. wwpn already exists\n"); + goto error; + } + memcpy(csio_ln_wwpn(ln), wwn, 8); + } + + fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING); + + if (csio_fcoe_alloc_vnp(hw, ln)) + goto error; + + *(struct csio_lnode **)fc_vport->dd_data = ln; + ln->fc_vport = fc_vport; + if (!fc_vport->node_name) + fc_vport->node_name = wwn_to_u64(csio_ln_wwnn(ln)); + if (!fc_vport->port_name) + fc_vport->port_name = wwn_to_u64(csio_ln_wwpn(ln)); + csio_fchost_attr_init(ln); + return 0; +error: + if (ln) + csio_shost_exit(ln); + + return ret; +} + +static int +csio_vport_delete(struct fc_vport *fc_vport) +{ + struct csio_lnode *ln = *(struct csio_lnode **)fc_vport->dd_data; + struct Scsi_Host *shost = csio_ln_to_shost(ln); + struct csio_hw *hw = csio_lnode_to_hw(ln); + int rmv; + + spin_lock_irq(&hw->lock); + rmv = csio_is_hw_removing(hw); + spin_unlock_irq(&hw->lock); + + if (rmv) { + csio_shost_exit(ln); + return 0; + } + + /* Quiesce ios and send remove event to lnode */ + scsi_block_requests(shost); + spin_lock_irq(&hw->lock); + csio_scsim_cleanup_io_lnode(csio_hw_to_scsim(hw), ln); + csio_lnode_close(ln); + spin_unlock_irq(&hw->lock); + scsi_unblock_requests(shost); + + /* Free vnp */ + if (fc_vport->vport_state != FC_VPORT_DISABLED) + csio_fcoe_free_vnp(hw, ln); + + csio_shost_exit(ln); + return 0; +} + +static int +csio_vport_disable(struct fc_vport *fc_vport, bool disable) +{ + struct csio_lnode *ln = *(struct csio_lnode **)fc_vport->dd_data; + struct Scsi_Host *shost = csio_ln_to_shost(ln); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + /* disable vport */ + if (disable) { + /* Quiesce ios and send stop event to lnode */ + scsi_block_requests(shost); + spin_lock_irq(&hw->lock); + csio_scsim_cleanup_io_lnode(csio_hw_to_scsim(hw), ln); + csio_lnode_stop(ln); + spin_unlock_irq(&hw->lock); + scsi_unblock_requests(shost); + + /* Free vnp */ + csio_fcoe_free_vnp(hw, ln); + fc_vport_set_state(fc_vport, FC_VPORT_DISABLED); + csio_ln_err(ln, "vport disabled\n"); + return 0; + } else { + /* enable vport */ + fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING); + if (csio_fcoe_alloc_vnp(hw, ln)) { + csio_ln_err(ln, "vport enabled failed.\n"); + return -1; + } + csio_ln_err(ln, "vport enabled\n"); + return 0; + } +} + +static void +csio_dev_loss_tmo_callbk(struct fc_rport *rport) +{ + struct csio_rnode *rn; + struct csio_hw *hw; + struct csio_lnode *ln; + + rn = *((struct csio_rnode **)rport->dd_data); + ln = csio_rnode_to_lnode(rn); + hw = csio_lnode_to_hw(ln); + + spin_lock_irq(&hw->lock); + + /* return if driver is being removed or same rnode comes back online */ + if (csio_is_hw_removing(hw) || csio_is_rnode_ready(rn)) + goto out; + + csio_ln_dbg(ln, "devloss timeout on rnode:%p portid:x%x flowid:x%x\n", + rn, rn->nport_id, csio_rn_flowid(rn)); + + CSIO_INC_STATS(ln, n_dev_loss_tmo); + + /* + * enqueue devloss event to event worker thread to serialize all + * rnode events. + */ + if (csio_enqueue_evt(hw, CSIO_EVT_DEV_LOSS, &rn, sizeof(rn))) { + CSIO_INC_STATS(hw, n_evt_drop); + goto out; + } + + if (!(hw->flags & CSIO_HWF_FWEVT_PENDING)) { + hw->flags |= CSIO_HWF_FWEVT_PENDING; + spin_unlock_irq(&hw->lock); + schedule_work(&hw->evtq_work); + return; + } + +out: + spin_unlock_irq(&hw->lock); +} + +/* FC transport functions template - Physical port */ +struct fc_function_template csio_fc_transport_funcs = { + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_maxframe_size = 1, + + .get_host_port_id = csio_get_host_port_id, + .show_host_port_id = 1, + + .get_host_port_type = csio_get_host_port_type, + .show_host_port_type = 1, + + .get_host_port_state = csio_get_host_port_state, + .show_host_port_state = 1, + + .show_host_active_fc4s = 1, + .get_host_speed = csio_get_host_speed, + .show_host_speed = 1, + .get_host_fabric_name = csio_get_host_fabric_name, + .show_host_fabric_name = 1, + + .get_fc_host_stats = csio_get_stats, + + .dd_fcrport_size = sizeof(struct csio_rnode *), + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + + .set_rport_dev_loss_tmo = csio_set_rport_loss_tmo, + .show_rport_dev_loss_tmo = 1, + + .show_starget_port_id = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + + .dev_loss_tmo_callbk = csio_dev_loss_tmo_callbk, + .dd_fcvport_size = sizeof(struct csio_lnode *), + + .vport_create = csio_vport_create, + .vport_disable = csio_vport_disable, + .vport_delete = csio_vport_delete, +}; + +/* FC transport functions template - Virtual port */ +struct fc_function_template csio_fc_transport_vport_funcs = { + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_maxframe_size = 1, + + .get_host_port_id = csio_get_host_port_id, + .show_host_port_id = 1, + + .get_host_port_type = csio_get_host_port_type, + .show_host_port_type = 1, + + .get_host_port_state = csio_get_host_port_state, + .show_host_port_state = 1, + .show_host_active_fc4s = 1, + + .get_host_speed = csio_get_host_speed, + .show_host_speed = 1, + + .get_host_fabric_name = csio_get_host_fabric_name, + .show_host_fabric_name = 1, + + .get_fc_host_stats = csio_get_stats, + + .dd_fcrport_size = sizeof(struct csio_rnode *), + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + + .set_rport_dev_loss_tmo = csio_set_rport_loss_tmo, + .show_rport_dev_loss_tmo = 1, + + .show_starget_port_id = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + + .dev_loss_tmo_callbk = csio_dev_loss_tmo_callbk, + +}; diff --git a/drivers/scsi/csiostor/csio_defs.h b/drivers/scsi/csiostor/csio_defs.h new file mode 100644 index 0000000..c38017b --- /dev/null +++ b/drivers/scsi/csiostor/csio_defs.h @@ -0,0 +1,121 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_DEFS_H__ +#define __CSIO_DEFS_H__ + +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/bug.h> +#include <linux/pci.h> +#include <linux/jiffies.h> + +#define CSIO_INVALID_IDX 0xFFFFFFFF +#define CSIO_INC_STATS(elem, val) ((elem)->stats.val++) +#define CSIO_DEC_STATS(elem, val) ((elem)->stats.val--) +#define CSIO_VALID_WWN(__n) ((*__n >> 4) == 0x5 ? true : false) +#define CSIO_DID_MASK 0xFFFFFF +#define CSIO_WORD_TO_BYTE 4 + +#ifndef readq +static inline u64 readq(void __iomem *addr) +{ + return readl(addr) + ((u64)readl(addr + 4) << 32); +} + +static inline void writeq(u64 val, void __iomem *addr) +{ + writel(val, addr); + writel(val >> 32, addr + 4); +} +#endif + +static inline int +csio_list_deleted(struct list_head *list) +{ + return ((list->next == list) && (list->prev == list)); +} + +#define csio_list_next(elem) (((struct list_head *)(elem))->next) +#define csio_list_prev(elem) (((struct list_head *)(elem))->prev) + +/* State machine */ +typedef void (*csio_sm_state_t)(void *, uint32_t); + +struct csio_sm { + struct list_head sm_list; + csio_sm_state_t sm_state; +}; + +static inline void +csio_set_state(void *smp, void *state) +{ + ((struct csio_sm *)smp)->sm_state = (csio_sm_state_t)state; +} + +static inline void +csio_init_state(struct csio_sm *smp, void *state) +{ + csio_set_state(smp, state); +} + +static inline void +csio_post_event(void *smp, uint32_t evt) +{ + ((struct csio_sm *)smp)->sm_state(smp, evt); +} + +static inline csio_sm_state_t +csio_get_state(void *smp) +{ + return ((struct csio_sm *)smp)->sm_state; +} + +static inline bool +csio_match_state(void *smp, void *state) +{ + return (csio_get_state(smp) == (csio_sm_state_t)state); +} + +#define CSIO_ASSERT(cond) BUG_ON(!(cond)) + +#ifdef __CSIO_DEBUG__ +#define CSIO_DB_ASSERT(__c) CSIO_ASSERT((__c)) +#else +#define CSIO_DB_ASSERT(__c) +#endif + +#endif /* ifndef __CSIO_DEFS_H__ */ diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c new file mode 100644 index 0000000..8ecdb94 --- /dev/null +++ b/drivers/scsi/csiostor/csio_hw.c @@ -0,0 +1,4395 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/firmware.h> +#include <linux/stddef.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/compiler.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/log2.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" + +int csio_force_master; +int csio_dbg_level = 0xFEFF; +unsigned int csio_port_mask = 0xf; + +/* Default FW event queue entries. */ +static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE; + +/* Default MSI param level */ +int csio_msi = 2; + +/* FCoE function instances */ +static int dev_num; + +/* FCoE Adapter types & its description */ +static const struct csio_adap_desc csio_fcoe_adapters[] = { + {"T440-Dbg 10G", "Chelsio T440-Dbg 10G [FCoE]"}, + {"T420-CR 10G", "Chelsio T420-CR 10G [FCoE]"}, + {"T422-CR 10G/1G", "Chelsio T422-CR 10G/1G [FCoE]"}, + {"T440-CR 10G", "Chelsio T440-CR 10G [FCoE]"}, + {"T420-BCH 10G", "Chelsio T420-BCH 10G [FCoE]"}, + {"T440-BCH 10G", "Chelsio T440-BCH 10G [FCoE]"}, + {"T440-CH 10G", "Chelsio T440-CH 10G [FCoE]"}, + {"T420-SO 10G", "Chelsio T420-SO 10G [FCoE]"}, + {"T420-CX4 10G", "Chelsio T420-CX4 10G [FCoE]"}, + {"T420-BT 10G", "Chelsio T420-BT 10G [FCoE]"}, + {"T404-BT 1G", "Chelsio T404-BT 1G [FCoE]"}, + {"B420-SR 10G", "Chelsio B420-SR 10G [FCoE]"}, + {"B404-BT 1G", "Chelsio B404-BT 1G [FCoE]"}, + {"T480-CR 10G", "Chelsio T480-CR 10G [FCoE]"}, + {"T440-LP-CR 10G", "Chelsio T440-LP-CR 10G [FCoE]"}, + {"T4 FPGA", "Chelsio T4 FPGA [FCoE]"} +}; + +static void csio_mgmtm_cleanup(struct csio_mgmtm *); +static void csio_hw_mbm_cleanup(struct csio_hw *); + +/* State machine forward declarations */ +static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev); + +static void csio_hw_initialize(struct csio_hw *hw); +static void csio_evtq_stop(struct csio_hw *hw); +static void csio_evtq_start(struct csio_hw *hw); + +int csio_is_hw_ready(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_ready); +} + +int csio_is_hw_removing(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_removing); +} + + +/* + * csio_hw_wait_op_done_val - wait until an operation is completed + * @hw: the HW module + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +static int +csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask, + int polarity, int attempts, int delay, uint32_t *valp) +{ + uint32_t val; + while (1) { + val = csio_rd_reg32(hw, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +void +csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask, + uint32_t value) +{ + uint32_t val = csio_rd_reg32(hw, reg) & ~mask; + + csio_wr_reg32(hw, val | value, reg); + /* Flush */ + csio_rd_reg32(hw, reg); + +} + +/* + * csio_hw_mc_read - read from MC through backdoor accesses + * @hw: the hw module + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from MC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int +csio_hw_mc_read(struct csio_hw *hw, uint32_t addr, __be32 *data, + uint64_t *ecc) +{ + int i; + + if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR); + csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN); + csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN); + csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST | BIST_CMD_GAP(1), + MC_BIST_CMD); + i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, MC_DATA(16)); +#undef MC_DATA + return 0; +} + +/* + * csio_hw_edc_read - read from EDC through backdoor accesses + * @hw: the hw module + * @idx: which EDC to access + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from EDC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int +csio_hw_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data, + uint64_t *ecc) +{ + int i; + + idx *= EDC_STRIDE; + if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx); + csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx); + csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx); + csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST, + EDC_BIST_CMD + idx); + i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, EDC_DATA(16)); +#undef EDC_DATA + return 0; +} + +/* + * csio_mem_win_rw - read/write memory through PCIE memory window + * @hw: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int +csio_mem_win_rw(struct csio_hw *hw, u32 addr, u32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + csio_wr_reg32(hw, addr & ~(MEMWIN0_APERTURE - 1), + PCIE_MEM_ACCESS_OFFSET); + csio_rd_reg32(hw, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i + sizeof(__be32)) { + if (dir) + *data++ = csio_rd_reg32(hw, (MEMWIN0_BASE + i)); + else + csio_wr_reg32(hw, *data++, (MEMWIN0_BASE + i)); + } + + return 0; +} + +/* + * csio_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @hw: the csio_hw + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int +csio_memory_rw(struct csio_hw *hw, int mtype, u32 addr, u32 len, + uint32_t *buf, int dir) +{ + uint32_t pos, start, end, offset, memoffset; + int ret; + uint32_t *data; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + data = kzalloc(MEMWIN0_APERTURE, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = csio_mem_win_rw(hw, pos, data, 1); + if (ret) { + kfree(data); + return ret; + } + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = csio_mem_win_rw(hw, pos, data, dir); + if (ret) { + kfree(data); + return ret; + } + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + kfree(data); + + return 0; +} + +static int +csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf) +{ + return csio_memory_rw(hw, mtype, addr, len, buf, 0); +} + +/* + * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. + */ +#define EEPROM_MAX_RD_POLL 40 +#define EEPROM_MAX_WR_POLL 6 +#define EEPROM_STAT_ADDR 0x7bfc +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 +#define VPD_LEN 512 +#define VPD_INFO_FLD_HDR_SIZE 3 + +/* + * csio_hw_seeprom_read - read a serial EEPROM location + * @hw: hw to read + * @addr: EEPROM virtual address + * @data: where to store the read data + * + * Read a 32-bit word from a location in serial EEPROM using the card's PCI + * VPD capability. Note that this function must be called with a virtual + * address. + */ +static int +csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data) +{ + uint16_t val = 0; + int attempts = EEPROM_MAX_RD_POLL; + uint32_t base = hw->params.pci.vpd_cap_addr; + + if (addr >= EEPROMVSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); + + do { + udelay(10); + pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); + } while (!(val & PCI_VPD_ADDR_F) && --attempts); + + if (!(val & PCI_VPD_ADDR_F)) { + csio_err(hw, "reading EEPROM address 0x%x failed\n", addr); + return -EINVAL; + } + + pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data); + *data = le32_to_cpu(*data); + + return 0; +} + +/* + * Partial EEPROM Vital Product Data structure. Includes only the ID and + * VPD-R sections. + */ +struct t4_vpd_hdr { + u8 id_tag; + u8 id_len[2]; + u8 id_data[ID_LEN]; + u8 vpdr_tag; + u8 vpdr_len[2]; +}; + +/* + * csio_hw_get_vpd_keyword_val - Locates an information field keyword in + * the VPD + * @v: Pointer to buffered vpd data structure + * @kw: The keyword to search for + * + * Returns the value of the information field keyword or + * -EINVAL otherwise. + */ +static int +csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw) +{ + int32_t i; + int32_t offset , len; + const uint8_t *buf = &v->id_tag; + const uint8_t *vpdr_len = &v->vpdr_tag; + offset = sizeof(struct t4_vpd_hdr); + len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8); + + if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN) + return -EINVAL; + + for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) { + if (memcmp(buf + i , kw, 2) == 0) { + i += VPD_INFO_FLD_HDR_SIZE; + return i; + } + + i += VPD_INFO_FLD_HDR_SIZE + buf[i+2]; + } + + return -EINVAL; +} + +static int +csio_pci_capability(struct pci_dev *pdev, int cap, int *pos) +{ + *pos = pci_find_capability(pdev, cap); + if (*pos) + return 0; + + return -1; +} + +/* + * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM + * @hw: HW module + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +static int +csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p) +{ + int i, ret, ec, sn, addr; + uint8_t *vpd, csum; + const struct t4_vpd_hdr *v; + /* To get around compilation warning from strstrip */ + char *s; + + if (csio_is_valid_vpd(hw)) + return 0; + + ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD, + &hw->params.pci.vpd_cap_addr); + if (ret) + return -EINVAL; + + vpd = kzalloc(VPD_LEN, GFP_ATOMIC); + if (vpd == NULL) + return -ENOMEM; + + /* + * Card information normally starts at VPD_BASE but early cards had + * it at 0. + */ + ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd)); + addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + for (i = 0; i < VPD_LEN; i += 4) { + ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i)); + if (ret) { + kfree(vpd); + return ret; + } + } + + /* Reset the VPD flag! */ + hw->flags &= (~CSIO_HWF_VPD_VALID); + + v = (const struct t4_vpd_hdr *)vpd; + +#define FIND_VPD_KW(var, name) do { \ + var = csio_hw_get_vpd_keyword_val(v, name); \ + if (var < 0) { \ + csio_err(hw, "missing VPD keyword " name "\n"); \ + kfree(vpd); \ + return -EINVAL; \ + } \ +} while (0) + + FIND_VPD_KW(i, "RV"); + for (csum = 0; i >= 0; i--) + csum += vpd[i]; + + if (csum) { + csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum); + kfree(vpd); + return -EINVAL; + } + FIND_VPD_KW(ec, "EC"); + FIND_VPD_KW(sn, "SN"); +#undef FIND_VPD_KW + + memcpy(p->id, v->id_data, ID_LEN); + s = strstrip(p->id); + memcpy(p->ec, vpd + ec, EC_LEN); + s = strstrip(p->ec); + i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; + memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); + s = strstrip(p->sn); + + csio_valid_vpd_copied(hw); + + kfree(vpd); + return 0; +} + +/* + * csio_hw_sf1_read - read data from the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont, + int32_t lock, uint32_t *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP) & SF_BUSY) + return -EBUSY; + + cont = cont ? SF_CONT : 0; + lock = lock ? SF_LOCK : 0; + + csio_wr_reg32(hw, lock | cont | BYTECNT(byte_cnt - 1), SF_OP); + ret = csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, + 10, NULL); + if (!ret) + *valp = csio_rd_reg32(hw, SF_DATA); + return ret; +} + +/* + * csio_hw_sf1_write - write data to the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont, + int32_t lock, uint32_t val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP) & SF_BUSY) + return -EBUSY; + + cont = cont ? SF_CONT : 0; + lock = lock ? SF_LOCK : 0; + + csio_wr_reg32(hw, val, SF_DATA); + csio_wr_reg32(hw, cont | BYTECNT(byte_cnt - 1) | OP_WR | lock, SF_OP); + + return csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS, + 10, NULL); +} + +/* + * csio_hw_flash_wait_op - wait for a flash operation to complete + * @hw: the HW module + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int +csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay) +{ + int ret; + uint32_t status; + + while (1) { + ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 0, 1, &status); + if (ret != 0) + return ret; + + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/* + * csio_hw_read_flash - read words from serial flash + * @hw: the HW module + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianess. + */ +static int +csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords, + uint32_t *data, int32_t byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + ret = csio_hw_sf1_write(hw, 4, 1, 0, addr); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 1, 0, data); + if (ret != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = htonl(*data); + } + return 0; +} + +/* + * csio_hw_write_flash - write up to a page of data to the serial flash + * @hw: the hw + * @addr: the start address to write + * @n: length of data to write in bytes + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. All the data must be written to the same page. + */ +static int +csio_hw_write_flash(struct csio_hw *hw, uint32_t addr, + uint32_t n, const uint8_t *data) +{ + int ret = -EINVAL; + uint32_t buf[64]; + uint32_t i, c, left, val, offset = addr & 0xff; + + if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto unlock; + + ret = csio_hw_sf1_write(hw, 4, 1, 1, val); + if (ret != 0) + goto unlock; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = csio_hw_sf1_write(hw, c, c != left, 1, val); + if (ret) + goto unlock; + } + ret = csio_hw_flash_wait_op(hw, 8, 1); + if (ret) + goto unlock; + + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + + /* Read the page to verify the write succeeded */ + ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (uint8_t *)buf + offset, n)) { + csio_err(hw, + "failed to correctly write the flash page at %#x\n", + addr); + return -EINVAL; + } + + return 0; + +unlock: + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + return ret; +} + +/* + * csio_hw_flash_erase_sectors - erase a range of flash sectors + * @hw: the HW module + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given inclusive range. + */ +static int +csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end) +{ + int ret = 0; + + while (start <= end) { + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto out; + + ret = csio_hw_sf1_write(hw, 4, 0, 1, + SF_ERASE_SECTOR | (start << 8)); + if (ret != 0) + goto out; + + ret = csio_hw_flash_wait_op(hw, 14, 500); + if (ret != 0) + goto out; + + start++; + } +out: + if (ret) + csio_err(hw, "erase of flash sector %d failed, error %d\n", + start, ret); + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + return 0; +} + +/* + * csio_hw_flash_cfg_addr - return the address of the flash + * configuration file + * @hw: the HW module + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +static unsigned int +csio_hw_flash_cfg_addr(struct csio_hw *hw) +{ + if (hw->params.sf_size == 0x100000) + return FPGA_FLASH_CFG_OFFSET; + else + return FLASH_CFG_OFFSET; +} + +static void +csio_hw_print_fw_version(struct csio_hw *hw, char *str) +{ + csio_info(hw, "%s: %u.%u.%u.%u\n", str, + FW_HDR_FW_VER_MAJOR_GET(hw->fwrev), + FW_HDR_FW_VER_MINOR_GET(hw->fwrev), + FW_HDR_FW_VER_MICRO_GET(hw->fwrev), + FW_HDR_FW_VER_BUILD_GET(hw->fwrev)); +} + +/* + * csio_hw_get_fw_version - read the firmware version + * @hw: HW module + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +static int +csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers) +{ + return csio_hw_read_flash(hw, FW_IMG_START + + offsetof(struct fw_hdr, fw_ver), 1, + vers, 0); +} + +/* + * csio_hw_get_tp_version - read the TP microcode version + * @hw: HW module + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +static int +csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers) +{ + return csio_hw_read_flash(hw, FLASH_FW_START + + offsetof(struct fw_hdr, tp_microcode_ver), 1, + vers, 0); +} + +/* + * csio_hw_check_fw_version - check if the FW is compatible with + * this driver + * @hw: HW module + * + * Checks if an adapter's FW is compatible with the driver. Returns 0 + * if there's exact match, a negative error if the version could not be + * read or there's a major/minor version mismatch/minor. + */ +static int +csio_hw_check_fw_version(struct csio_hw *hw) +{ + int ret, major, minor, micro; + + ret = csio_hw_get_fw_version(hw, &hw->fwrev); + if (!ret) + ret = csio_hw_get_tp_version(hw, &hw->tp_vers); + if (ret) + return ret; + + major = FW_HDR_FW_VER_MAJOR_GET(hw->fwrev); + minor = FW_HDR_FW_VER_MINOR_GET(hw->fwrev); + micro = FW_HDR_FW_VER_MICRO_GET(hw->fwrev); + + if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */ + csio_err(hw, "card FW has major version %u, driver wants %u\n", + major, FW_VERSION_MAJOR); + return -EINVAL; + } + + if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO) + return 0; /* perfect match */ + + /* Minor/micro version mismatch */ + return -EINVAL; +} + +/* + * csio_hw_fw_dload - download firmware. + * @hw: HW module + * @fw_data: firmware image to write. + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + */ +static int +csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size) +{ + uint32_t csum; + int32_t addr; + int ret; + uint32_t i; + uint8_t first_page[SF_PAGE_SIZE]; + const __be32 *p = (const __be32 *)fw_data; + struct fw_hdr *hdr = (struct fw_hdr *)fw_data; + uint32_t sf_sec_size; + + if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) { + csio_err(hw, "Serial Flash data invalid\n"); + return -EINVAL; + } + + if (!size) { + csio_err(hw, "FW image has no data\n"); + return -EINVAL; + } + + if (size & 511) { + csio_err(hw, "FW image size not multiple of 512 bytes\n"); + return -EINVAL; + } + + if (ntohs(hdr->len512) * 512 != size) { + csio_err(hw, "FW image size differs from size in FW header\n"); + return -EINVAL; + } + + if (size > FW_MAX_SIZE) { + csio_err(hw, "FW image too large, max is %u bytes\n", + FW_MAX_SIZE); + return -EINVAL; + } + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + + if (csum != 0xffffffff) { + csio_err(hw, "corrupted firmware image, checksum %#x\n", csum); + return -EINVAL; + } + + sf_sec_size = hw->params.sf_size / hw->params.sf_nsec; + i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ + + csio_dbg(hw, "Erasing sectors... start:%d end:%d\n", + FW_START_SEC, FW_START_SEC + i - 1); + + ret = csio_hw_flash_erase_sectors(hw, FW_START_SEC, + FW_START_SEC + i - 1); + if (ret) { + csio_err(hw, "Flash Erase failed\n"); + goto out; + } + + /* + * We write the correct version at the end so the driver can see a bad + * version if the FW write fails. Start by writing a copy of the + * first page with a bad version. + */ + memcpy(first_page, fw_data, SF_PAGE_SIZE); + ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); + ret = csio_hw_write_flash(hw, FW_IMG_START, SF_PAGE_SIZE, first_page); + if (ret) + goto out; + + csio_dbg(hw, "Writing Flash .. start:%d end:%d\n", + FW_IMG_START, FW_IMG_START + size); + + addr = FW_IMG_START; + for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { + addr += SF_PAGE_SIZE; + fw_data += SF_PAGE_SIZE; + ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data); + if (ret) + goto out; + } + + ret = csio_hw_write_flash(hw, + FW_IMG_START + + offsetof(struct fw_hdr, fw_ver), + sizeof(hdr->fw_ver), + (const uint8_t *)&hdr->fw_ver); + +out: + if (ret) + csio_err(hw, "firmware download failed, error %d\n", ret); + return ret; +} + +static int +csio_hw_get_flash_params(struct csio_hw *hw) +{ + int ret; + uint32_t info = 0; + + ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID); + if (!ret) + ret = csio_hw_sf1_read(hw, 3, 0, 1, &info); + csio_wr_reg32(hw, 0, SF_OP); /* unlock SF */ + if (ret != 0) + return ret; + + if ((info & 0xff) != 0x20) /* not a Numonix flash */ + return -EINVAL; + info >>= 16; /* log2 of size */ + if (info >= 0x14 && info < 0x18) + hw->params.sf_nsec = 1 << (info - 16); + else if (info == 0x18) + hw->params.sf_nsec = 64; + else + return -EINVAL; + hw->params.sf_size = 1 << info; + + return 0; +} + +static void +csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range) +{ + uint16_t val; + uint32_t pcie_cap; + + if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) { + pci_read_config_word(hw->pdev, + pcie_cap + PCI_EXP_DEVCTL2, &val); + val &= 0xfff0; + val |= range ; + pci_write_config_word(hw->pdev, + pcie_cap + PCI_EXP_DEVCTL2, val); + } +} + + +/* + * Return the specified PCI-E Configuration Space register from our Physical + * Function. We try first via a Firmware LDST Command since we prefer to let + * the firmware own all of these registers, but if that fails we go for it + * directly ourselves. + */ +static uint32_t +csio_read_pcie_cfg4(struct csio_hw *hw, int reg) +{ + u32 val = 0; + struct csio_mb *mbp; + int rv; + struct fw_ldst_cmd *ldst_cmd; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + pci_read_config_dword(hw->pdev, reg, &val); + return val; + } + + csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg); + + rv = csio_mb_issue(hw, mbp); + + /* + * If the LDST Command suucceeded, exctract the returned register + * value. Otherwise read it directly ourself. + */ + if (rv == 0) { + ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb); + val = ntohl(ldst_cmd->u.pcie.data[0]); + } else + pci_read_config_dword(hw->pdev, reg, &val); + + mempool_free(mbp, hw->mb_mempool); + + return val; +} /* csio_read_pcie_cfg4 */ + +static int +csio_hw_set_mem_win(struct csio_hw *hw) +{ + u32 bar0; + + /* + * Truncation intentional: we only read the bottom 32-bits of the + * 64-bit BAR0/BAR1 ... We use the hardware backdoor mechanism to + * read BAR0 instead of using pci_resource_start() because we could be + * operating from within a Virtual Machine which is trapping our + * accesses to our Configuration Space and we need to set up the PCI-E + * Memory Window decoders with the actual addresses which will be + * coming across the PCI-E link. + */ + bar0 = csio_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); + bar0 &= PCI_BASE_ADDRESS_MEM_MASK; + + /* + * Set up memory window for accessing adapter memory ranges. (Read + * back MA register to ensure that changes propagate before we attempt + * to use the new values.) + */ + csio_wr_reg32(hw, (bar0 + MEMWIN0_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN0_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0)); + csio_wr_reg32(hw, (bar0 + MEMWIN1_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN1_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1)); + csio_wr_reg32(hw, (bar0 + MEMWIN2_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN2_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2)); + csio_rd_reg32(hw, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2)); + return 0; +} /* csio_hw_set_mem_win */ + + + +/*****************************************************************************/ +/* HW State machine assists */ +/*****************************************************************************/ + +static int +csio_hw_dev_ready(struct csio_hw *hw) +{ + uint32_t reg; + int cnt = 6; + + while (((reg = csio_rd_reg32(hw, PL_WHOAMI)) == 0xFFFFFFFF) && + (--cnt != 0)) + mdelay(100); + + if ((cnt == 0) && (((int32_t)(SOURCEPF_GET(reg)) < 0) || + (SOURCEPF_GET(reg) >= CSIO_MAX_PFN))) { + csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt); + return -EIO; + } + + hw->pfn = SOURCEPF_GET(reg); + + return 0; +} + +/* + * csio_do_hello - Perform the HELLO FW Mailbox command and process response. + * @hw: HW module + * @state: Device state + * + * FW_HELLO_CMD has to be polled for completion. + */ +static int +csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state) +{ + struct csio_mb *mbp; + int rv = 0; + enum csio_dev_master master; + enum fw_retval retval; + uint8_t mpfn; + char state_str[16]; + int retries = FW_CMD_HELLO_RETRIES; + + memset(state_str, 0, sizeof(state_str)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + rv = -ENOMEM; + CSIO_INC_STATS(hw, n_err_nomem); + goto out; + } + + master = csio_force_master ? CSIO_MASTER_MUST : CSIO_MASTER_MAY; + +retry: + csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, + hw->pfn, master, NULL); + + rv = csio_mb_issue(hw, mbp); + if (rv) { + csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv); + goto out_free_mb; + } + + csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn); + if (retval != FW_SUCCESS) { + csio_err(hw, "HELLO cmd failed with ret: %d\n", retval); + rv = -EINVAL; + goto out_free_mb; + } + + /* Firmware has designated us to be master */ + if (hw->pfn == mpfn) { + hw->flags |= CSIO_HWF_MASTER; + } else if (*state == CSIO_DEV_STATE_UNINIT) { + /* + * If we're not the Master PF then we need to wait around for + * the Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable + * PF and there is no current Master PF; a Master PF may show up + * momentarily and we wouldn't want to fail pointlessly. (This + * can happen when an OS loads lots of different drivers rapidly + * at the same time). In this case, the Master PF returned by + * the firmware will be PCIE_FW_MASTER_MASK so the test below + * will work ... + */ + + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + uint32_t pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = csio_rd_reg32(hw, PCIE_FW); + if (!(pcie_fw & (PCIE_FW_ERR|PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + rv = -ETIMEDOUT; + break; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & PCIE_FW_ERR) { + *state = CSIO_DEV_STATE_ERR; + rv = -ETIMEDOUT; + } else if (pcie_fw & PCIE_FW_INIT) + *state = CSIO_DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (mpfn == PCIE_FW_MASTER_MASK && + (pcie_fw & PCIE_FW_MASTER_VLD)) + mpfn = PCIE_FW_MASTER_GET(pcie_fw); + break; + } + hw->flags &= ~CSIO_HWF_MASTER; + } + + switch (*state) { + case CSIO_DEV_STATE_UNINIT: + strcpy(state_str, "Initializing"); + break; + case CSIO_DEV_STATE_INIT: + strcpy(state_str, "Initialized"); + break; + case CSIO_DEV_STATE_ERR: + strcpy(state_str, "Error"); + break; + default: + strcpy(state_str, "Unknown"); + break; + } + + if (hw->pfn == mpfn) + csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n", + hw->pfn, state_str); + else + csio_info(hw, + "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n", + hw->pfn, mpfn, state_str); + +out_free_mb: + mempool_free(mbp, hw->mb_mempool); +out: + return rv; +} + +/* + * csio_do_bye - Perform the BYE FW Mailbox command and process response. + * @hw: HW module + * + */ +static int +csio_do_bye(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of BYE command failed\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_do_reset- Perform the device reset. + * @hw: HW module + * @fw_rst: FW reset + * + * If fw_rst is set, issues FW reset mbox cmd otherwise + * does PIO reset. + * Performs reset of the function. + */ +static int +csio_do_reset(struct csio_hw *hw, bool fw_rst) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + if (!fw_rst) { + /* PIO reset */ + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + mdelay(2000); + return 0; + } + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE | PIORST, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed.n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp) +{ + struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb; + uint16_t caps; + + caps = ntohs(rsp->fcoecaps); + + if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) { + csio_err(hw, "No FCoE Initiator capability in the firmware.\n"); + return -EINVAL; + } + + if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) { + csio_err(hw, "No FCoE Control Offload capability\n"); + return -EINVAL; + } + + return 0; +} + +/* + * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +static int +csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force) +{ + enum fw_retval retval = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= PCIE_FW_MASTER_MASK) { + struct csio_mb *mbp; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE | PIORST, FW_RESET_CMD_HALT(1), + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + mempool_free(mbp, hw->mb_mempool); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (retval == 0 || force) { + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, UPCRST); + csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return retval ? -EINVAL : 0; +} + +/* + * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET + * @hw: the HW module + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by csio_hw_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +static int +csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= PCIE_FW_MASTER_MASK) { + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0); + msleep(100); + if (csio_do_reset(hw, true) == 0) + return 0; + } + + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + msleep(2000); + } else { + int ms; + + csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(csio_rd_reg32(hw, PCIE_FW) & PCIE_FW_HALT)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/* + * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +static int +csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox, + const u8 *fw_data, uint32_t size, int32_t force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = csio_hw_fw_halt(hw, mbox, force); + if (ret != 0 && !force) + return ret; + + ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size); + if (ret != 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return csio_hw_fw_restart(hw, mbox, reset); +} + + +/* + * csio_hw_fw_config_file - setup an adapter via a Configuration File + * @hw: the HW module + * @mbox: mailbox to use for the FW command + * @mtype: the memory type where the Configuration File is located + * @maddr: the memory address where the Configuration File is located + * @finiver: return value for CF [fini] version + * @finicsum: return value for CF [fini] checksum + * @cfcsum: return value for CF computed checksum + * + * Issue a command to get the firmware to process the Configuration + * File located at the specified mtype/maddress. If the Configuration + * File is processed successfully and return value pointers are + * provided, the Configuration File "[fini] section version and + * checksum values will be returned along with the computed checksum. + * It's up to the caller to decide how it wants to respond to the + * checksums not matching but it recommended that a prominant warning + * be emitted in order to help people rapidly identify changed or + * corrupted Configuration Files. + * + * Also note that it's possible to modify things like "niccaps", + * "toecaps",etc. between processing the Configuration File and telling + * the firmware to use the new configuration. Callers which want to + * do this will need to "hand-roll" their own CAPS_CONFIGS commands for + * Configuration Files if they want to do this. + */ +static int +csio_hw_fw_config_file(struct csio_hw *hw, + unsigned int mtype, unsigned int maddr, + uint32_t *finiver, uint32_t *finicsum, uint32_t *cfcsum) +{ + struct csio_mb *mbp; + struct fw_caps_config_cmd *caps_cmd; + int rv = -EINVAL; + enum fw_retval ret; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb); + CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); + caps_cmd->op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd->cfvalid_to_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n"); + goto out; + } + + ret = csio_mb_fw_retval(mbp); + if (ret != FW_SUCCESS) { + csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); + goto out; + } + + if (finiver) + *finiver = ntohl(caps_cmd->finiver); + if (finicsum) + *finicsum = ntohl(caps_cmd->finicsum); + if (cfcsum) + *cfcsum = ntohl(caps_cmd->cfcsum); + + /* Validate device capabilities */ + if (csio_hw_validate_caps(hw, mbp)) { + rv = -ENOENT; + goto out; + } + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd->op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n"); + goto out; + } + + ret = csio_mb_fw_retval(mbp); + if (ret != FW_SUCCESS) { + csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); + goto out; + } + + rv = 0; +out: + mempool_free(mbp, hw->mb_mempool); + return rv; +} + +/* + * csio_get_device_params - Get device parameters. + * @hw: HW module + * + */ +static int +csio_get_device_params(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_mb *mbp; + enum fw_retval retval; + u32 param[6]; + int i, j = 0; + + /* Initialize portids to -1 */ + for (i = 0; i < CSIO_MAX_PPORTS; i++) + hw->pport[i].portid = -1; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get port vec information. */ + param[0] = FW_PARAM_DEV(PORTVEC); + + /* Get Core clock. */ + param[1] = FW_PARAM_DEV(CCLK); + + /* Get EQ id start and end. */ + param[2] = FW_PARAM_PFVF(EQ_START); + param[3] = FW_PARAM_PFVF(EQ_END); + + /* Get IQ id start and end. */ + param[4] = FW_PARAM_PFVF(IQFLINT_START); + param[5] = FW_PARAM_PFVF(IQFLINT_END); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(param), param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(param), param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* cache the information. */ + hw->port_vec = param[0]; + hw->vpd.cclk = param[1]; + wrm->fw_eq_start = param[2]; + wrm->fw_iq_start = param[4]; + + /* Using FW configured max iqs & eqs */ + if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) || + !csio_is_hw_master(hw)) { + hw->cfg_niq = param[5] - param[4] + 1; + hw->cfg_neq = param[3] - param[2] + 1; + csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n", + hw->cfg_niq, hw->cfg_neq); + } + + hw->port_vec &= csio_port_mask; + + hw->num_pports = hweight32(hw->port_vec); + + csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n", + hw->port_vec, hw->num_pports); + + for (i = 0; i < hw->num_pports; i++) { + while ((hw->port_vec & (1 << j)) == 0) + j++; + hw->pport[i].portid = j++; + csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid); + } + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + + +/* + * csio_config_device_caps - Get and set device capabilities. + * @hw: HW module + * + */ +static int +csio_config_device_caps(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv = -EINVAL; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval); + goto out; + } + + /* Validate device capabilities */ + if (csio_hw_validate_caps(hw, mbp)) + goto out; + + /* Don't config device capabilities if already configured */ + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + rv = 0; + goto out; + } + + /* Write back desired device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true, + false, true, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval); + goto out; + } + + rv = 0; +out: + mempool_free(mbp, hw->mb_mempool); + return rv; +} + +static int +csio_config_global_rss(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_rss_glb_config(hw, mbp, CSIO_MB_DEFAULT_TMO, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ | + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP, + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_RSS_GLB_CONFIG_CMD failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_RSS_GLB_CONFIG_CMD returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_config_pfvf - Configure Physical/Virtual functions settings. + * @hw: HW module + * + */ +static int +csio_config_pfvf(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* + * For now, allow all PFs to access to all ports using a pmask + * value of 0xF (M_FW_PFVF_CMD_PMASK). Once we have VFs, we will + * need to provide access based on some rule. + */ + csio_mb_pfvf(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, CSIO_NEQ, + CSIO_NETH_CTRL, CSIO_NIQ_FLINT, 0, 0, CSIO_NVI, CSIO_CMASK, + CSIO_PMASK, CSIO_NEXACTF, CSIO_R_CAPS, CSIO_WX_CAPS, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PFVF_CMD failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PFVF_CMD returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_enable_ports - Bring up all available ports. + * @hw: HW module. + * + */ +static int +csio_enable_ports(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + uint8_t portid; + int i; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + for (i = 0; i < hw->num_pports; i++) { + portid = hw->pport[i].portid; + + /* Read PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, + false, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_port_rsp(hw, mbp, &retval, + &hw->pport[i].pcap); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* Write back PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true, + (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + } /* For all ports */ + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_get_fcoe_resinfo - Read fcoe fw resource info. + * @hw: HW module + * Issued with lock held. + */ +static int +csio_get_fcoe_resinfo(struct csio_hw *hw) +{ + struct csio_fcoe_res_info *res_info = &hw->fres_info; + struct fw_fcoe_res_info_cmd *rsp; + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get FCoE FW resource information */ + csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb); + retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16)); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + res_info->e_d_tov = ntohs(rsp->e_d_tov); + res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq); + res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els); + res_info->r_r_tov = ntohs(rsp->r_r_tov); + res_info->max_xchgs = ntohl(rsp->max_xchgs); + res_info->max_ssns = ntohl(rsp->max_ssns); + res_info->used_xchgs = ntohl(rsp->used_xchgs); + res_info->used_ssns = ntohl(rsp->used_ssns); + res_info->max_fcfs = ntohl(rsp->max_fcfs); + res_info->max_vnps = ntohl(rsp->max_vnps); + res_info->used_fcfs = ntohl(rsp->used_fcfs); + res_info->used_vnps = ntohl(rsp->used_vnps); + + csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns, + res_info->max_xchgs); + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param) +{ + struct csio_mb *mbp; + enum fw_retval retval; + u32 _param[1]; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + _param[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(_param), _param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(_param), _param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + *param = _param[0]; + + return 0; +} + +static int +csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path) +{ + int ret = 0; + const struct firmware *cf; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev; + unsigned int mtype = 0, maddr = 0; + uint32_t *cfg_data; + int value_to_add = 0; + + if (request_firmware(&cf, CSIO_CF_FNAME, dev) < 0) { + csio_err(hw, "could not find config file " CSIO_CF_FNAME + ",err: %d\n", ret); + return -ENOENT; + } + + if (cf->size%4 != 0) + value_to_add = 4 - (cf->size % 4); + + cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL); + if (cfg_data == NULL) + return -ENOMEM; + + memcpy((void *)cfg_data, (const void *)cf->data, cf->size); + + if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) + return -EINVAL; + + mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16; + + ret = csio_memory_write(hw, mtype, maddr, + cf->size + value_to_add, cfg_data); + if (ret == 0) { + csio_info(hw, "config file upgraded to " CSIO_CF_FNAME "\n"); + strncpy(path, "/lib/firmware/" CSIO_CF_FNAME, 64); + } + + kfree(cfg_data); + release_firmware(cf); + + return ret; +} + +/* + * HW initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration -- either using the configuration + * file stored in flash on the adapter or using a filesystem-local file + * if available. + * + * If we don't have configuration file support in the firmware, then we'll + * have to set things up the old fashioned way with hard-coded register + * writes and firmware commands ... + */ + +/* + * Attempt to initialize the HW via a Firmware Configuration File. + */ +static int +csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param) +{ + unsigned int mtype, maddr; + int rv; + uint32_t finiver, finicsum, cfcsum; + int using_flash; + char path[64]; + + /* + * Reset device if necessary + */ + if (reset) { + rv = csio_do_reset(hw, true); + if (rv != 0) + goto bye; + } + + /* + * If we have a configuration file in host , + * then use that. Otherwise, use the configuration file stored + * in the HW flash ... + */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_config(hw, fw_cfg_param, path); + spin_lock_irq(&hw->lock); + if (rv != 0) { + if (rv == -ENOENT) { + /* + * config file was not found. Use default + * config file from flash. + */ + mtype = FW_MEMTYPE_CF_FLASH; + maddr = csio_hw_flash_cfg_addr(hw); + using_flash = 1; + } else { + /* + * we revert back to the hardwired config if + * flashing failed. + */ + goto bye; + } + } else { + mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16; + using_flash = 0; + } + + hw->cfg_store = (uint8_t)mtype; + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. + */ + rv = csio_hw_fw_config_file(hw, mtype, maddr, &finiver, + &finicsum, &cfcsum); + if (rv != 0) + goto bye; + + hw->cfg_finiver = finiver; + hw->cfg_finicsum = finicsum; + hw->cfg_cfcsum = cfcsum; + hw->cfg_csum_status = true; + + if (finicsum != cfcsum) { + csio_warn(hw, + "Config File checksum mismatch: csum=%#x, computed=%#x\n", + finicsum, cfcsum); + + hw->cfg_csum_status = false; + } + + /* + * Note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants buried in the driver. + */ + hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto bye; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + + csio_info(hw, + "Firmware Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash ? "in device FLASH" : path), finiver, cfcsum); + + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS; + csio_dbg(hw, "Configuration file error %d\n", rv); + return rv; +} + +/* + * Attempt to initialize the adapter via hard-coded, driver supplied + * parameters ... + */ +static int +csio_hw_no_fwconfig(struct csio_hw *hw, int reset) +{ + int rv; + /* + * Reset device if necessary + */ + if (reset) { + rv = csio_do_reset(hw, true); + if (rv != 0) + goto out; + } + + /* Get and set device capabilities */ + rv = csio_config_device_caps(hw); + if (rv != 0) + goto out; + + /* Config Global RSS command */ + rv = csio_config_global_rss(hw); + if (rv != 0) + goto out; + + /* Configure PF/VF capabilities of device */ + rv = csio_config_pfvf(hw); + if (rv != 0) + goto out; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto out; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + +out: + return rv; +} + +/* + * Returns -EINVAL if attempts to flash the firmware failed + * else returns 0, + * if flashing was not attempted because the card had the + * latest firmware ECANCELED is returned + */ +static int +csio_hw_flash_fw(struct csio_hw *hw) +{ + int ret = -ECANCELED; + const struct firmware *fw; + const struct fw_hdr *hdr; + u32 fw_ver; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev ; + + if (request_firmware(&fw, CSIO_FW_FNAME, dev) < 0) { + csio_err(hw, "could not find firmware image " CSIO_FW_FNAME + ",err: %d\n", ret); + return -EINVAL; + } + + hdr = (const struct fw_hdr *)fw->data; + fw_ver = ntohl(hdr->fw_ver); + if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR) + return -EINVAL; /* wrong major version, won't do */ + + /* + * If the flash FW is unusable or we found something newer, load it. + */ + if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR || + fw_ver > hw->fwrev) { + ret = csio_hw_fw_upgrade(hw, hw->pfn, fw->data, fw->size, + /*force=*/false); + if (!ret) + csio_info(hw, "firmware upgraded to version %pI4 from " + CSIO_FW_FNAME "\n", &hdr->fw_ver); + else + csio_err(hw, "firmware upgrade failed! err=%d\n", ret); + } + + release_firmware(fw); + + return ret; +} + + +/* + * csio_hw_configure - Configure HW + * @hw - HW module + * + */ +static void +csio_hw_configure(struct csio_hw *hw) +{ + int reset = 1; + int rv; + u32 param[1]; + + rv = csio_hw_dev_ready(hw); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* HW version */ + hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV); + + /* Needed for FW download */ + rv = csio_hw_get_flash_params(hw); + if (rv != 0) { + csio_err(hw, "Failed to get serial flash params rv:%d\n", rv); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Set pci completion timeout value to 4 seconds. */ + csio_set_pcie_completion_timeout(hw, 0xd); + + csio_hw_set_mem_win(hw); + + rv = csio_hw_get_fw_version(hw, &hw->fwrev); + if (rv != 0) + goto out; + + csio_hw_print_fw_version(hw, "Firmware revision"); + + rv = csio_do_hello(hw, &hw->fw_state); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Read vpd */ + rv = csio_hw_get_vpd_params(hw, &hw->vpd); + if (rv != 0) + goto out; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + rv = csio_hw_check_fw_version(hw); + if (rv == -EINVAL) { + + /* Do firmware update */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_fw(hw); + spin_lock_irq(&hw->lock); + + if (rv == 0) { + reset = 0; + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + rv = csio_hw_check_fw_version(hw); + } + } + /* + * If the firmware doesn't support Configuration + * Files, use the old Driver-based, hard-wired + * initialization. Otherwise, try using the + * Configuration File support and fall back to the + * Driver-based initialization if there's no + * Configuration File found. + */ + if (csio_hw_check_fwconfig(hw, param) == 0) { + rv = csio_hw_use_fwconfig(hw, reset, param); + if (rv == -ENOENT) + goto out; + if (rv != 0) { + csio_info(hw, + "No Configuration File present " + "on adapter. Using hard-wired " + "configuration parameters.\n"); + rv = csio_hw_no_fwconfig(hw, reset); + } + } else { + rv = csio_hw_no_fwconfig(hw, reset); + } + + if (rv != 0) + goto out; + + } else { + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto out; + + /* Get device capabilities */ + rv = csio_config_device_caps(hw); + if (rv != 0) + goto out; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + goto out; + } + } /* if not master */ + +out: + return; +} + +/* + * csio_hw_initialize - Initialize HW + * @hw - HW module + * + */ +static void +csio_hw_initialize(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv; + int i; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) + goto out; + + csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n"); + goto free_and_out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n", + retval); + goto free_and_out; + } + + mempool_free(mbp, hw->mb_mempool); + } + + rv = csio_get_fcoe_resinfo(hw); + if (rv != 0) { + csio_err(hw, "Failed to read fcoe resource info: %d\n", rv); + goto out; + } + + spin_unlock_irq(&hw->lock); + rv = csio_config_queues(hw); + spin_lock_irq(&hw->lock); + + if (rv != 0) { + csio_err(hw, "Config of queues failed!: %d\n", rv); + goto out; + } + + for (i = 0; i < hw->num_pports; i++) + hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + rv = csio_enable_ports(hw); + if (rv != 0) { + csio_err(hw, "Failed to enable ports: %d\n", rv); + goto out; + } + } + + csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE); + return; + +free_and_out: + mempool_free(mbp, hw->mb_mempool); +out: + return; +} + +#define PF_INTR_MASK (PFSW | PFCIM) + +/* + * csio_hw_intr_enable - Enable HW interrupts + * @hw: Pointer to HW module. + * + * Enable interrupts in HW registers. + */ +static void +csio_hw_intr_enable(struct csio_hw *hw) +{ + uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw)); + uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI)); + uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE); + + /* + * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up + * by FW, so do nothing for INTX. + */ + if (hw->intr_mode == CSIO_IM_MSIX) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG), + AIVEC(AIVEC_MASK), vec); + else if (hw->intr_mode == CSIO_IM_MSI) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG), + AIVEC(AIVEC_MASK), 0); + + csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE)); + + /* Turn on MB interrupts - this will internally flush PIO as well */ + csio_mb_intr_enable(hw); + + /* These are common registers - only a master can modify them */ + if (csio_is_hw_master(hw)) { + /* + * Disable the Serial FLASH interrupt, if enabled! + */ + pl &= (~SF); + csio_wr_reg32(hw, pl, PL_INT_ENABLE); + + csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE | + EGRESS_SIZE_ERR | ERR_INVALID_CIDX_INC | + ERR_CPL_OPCODE_0 | ERR_DROPPED_DB | + ERR_DATA_CPL_ON_HIGH_QID1 | + ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 | + ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | + ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | + ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR, + SGE_INT_ENABLE3); + csio_set_reg_field(hw, PL_INT_MAP0, 0, 1 << pf); + } + + hw->flags |= CSIO_HWF_HW_INTR_ENABLED; + +} + +/* + * csio_hw_intr_disable - Disable HW interrupts + * @hw: Pointer to HW module. + * + * Turn off Mailbox and PCI_PF_CFG interrupts. + */ +void +csio_hw_intr_disable(struct csio_hw *hw) +{ + uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI)); + + if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED)) + return; + + hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED; + + csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE)); + if (csio_is_hw_master(hw)) + csio_set_reg_field(hw, PL_INT_MAP0, 1 << pf, 0); + + /* Turn off MB interrupts */ + csio_mb_intr_disable(hw); + +} + +static void +csio_hw_fatal_err(struct csio_hw *hw) +{ + csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0); + csio_hw_intr_disable(hw); + + /* Do not reset HW, we may need FW state for debugging */ + csio_fatal(hw, "HW Fatal error encountered!\n"); +} + +/*****************************************************************************/ +/* START: HW SM */ +/*****************************************************************************/ +/* + * csio_hws_uninit - Uninit state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_CFG: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_configuring - Configuring state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT: + csio_set_state(&hw->sm, csio_hws_initializing); + csio_hw_initialize(hw); + break; + + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_initializing - Initialiazing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + + /* Enable interrupts */ + csio_hw_intr_enable(hw); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_ready - Ready state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt) +{ + /* Remember the event */ + hw->evtflag = evt; + + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + case CSIO_HWE_FW_DLOAD: + case CSIO_HWE_SUSPEND: + case CSIO_HWE_PCI_REMOVE: + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_quiescing); + /* cleanup all outstanding cmds */ + if (evt == CSIO_HWE_HBA_RESET || + evt == CSIO_HWE_PCIERR_DETECTED) + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false); + else + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true); + + csio_hw_intr_disable(hw); + csio_hw_mbm_cleanup(hw); + csio_evtq_stop(hw); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP); + csio_evtq_flush(hw); + csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw)); + csio_post_event(&hw->sm, CSIO_HWE_QUIESCED); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiescing - Quiescing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_QUIESCED: + switch (hw->evtflag) { + case CSIO_HWE_FW_DLOAD: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Download firmware */ + /* Fall through */ + + case CSIO_HWE_HBA_RESET: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Start reset of the HBA */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET); + csio_wr_destroy_queues(hw, false); + csio_do_reset(hw, false); + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_set_state(&hw->sm, csio_hws_removing); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE); + csio_wr_destroy_queues(hw, true); + /* Now send the bye command */ + csio_do_bye(hw); + break; + + case CSIO_HWE_SUSPEND: + csio_set_state(&hw->sm, csio_hws_quiesced); + break; + + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_pcierr); + csio_wr_destroy_queues(hw, false); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiesced - Quiesced state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_RESUME: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_resetting - HW Resetting state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET_DONE: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_removing - PCI Hotplug removing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + if (!csio_is_hw_master(hw)) + break; + /* + * The BYE should have alerady been issued, so we cant + * use the mailbox interface. Hence we use the PL_RST + * register directly. + */ + csio_err(hw, "Resetting HW and waiting 2 seconds...\n"); + csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST); + mdelay(2000); + break; + + /* Should never receive any new events */ + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } +} + +/* + * csio_hws_pcierr - PCI Error state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_PCIERR_SLOT_RESET: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/*****************************************************************************/ +/* END: HW SM */ +/*****************************************************************************/ + +/* Slow path handlers */ +struct intr_info { + unsigned int mask; /* bits to check in interrupt status */ + const char *msg; /* message to print or NULL */ + short stat_idx; /* stat counter to increment or -1 */ + unsigned short fatal; /* whether the condition reported is fatal */ +}; + +/* + * csio_handle_intr_status - table driven interrupt handler + * @hw: HW instance + * @reg: the interrupt status register to process + * @acts: table of interrupt actions + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occured. The actions include + * optionally emitting a warning or alert message. The table is terminated + * by an entry specifying mask 0. Returns the number of fatal interrupt + * conditions. + */ +static int +csio_handle_intr_status(struct csio_hw *hw, unsigned int reg, + const struct intr_info *acts) +{ + int fatal = 0; + unsigned int mask = 0; + unsigned int status = csio_rd_reg32(hw, reg); + + for ( ; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + csio_fatal(hw, "Fatal %s (0x%x)\n", + acts->msg, status & acts->mask); + } else if (acts->msg) + csio_info(hw, "%s (0x%x)\n", + acts->msg, status & acts->mask); + mask |= acts->mask; + } + status &= mask; + if (status) /* clear processed interrupts */ + csio_wr_reg32(hw, status, reg); + return fatal; +} + +/* + * Interrupt handler for the PCIE module. + */ +static void +csio_pcie_intr_handler(struct csio_hw *hw) +{ + static struct intr_info sysbus_intr_info[] = { + { RNPP, "RXNP array parity error", -1, 1 }, + { RPCP, "RXPC array parity error", -1, 1 }, + { RCIP, "RXCIF array parity error", -1, 1 }, + { RCCP, "Rx completions control array parity error", -1, 1 }, + { RFTP, "RXFT array parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info pcie_port_intr_info[] = { + { TPCP, "TXPC array parity error", -1, 1 }, + { TNPP, "TXNP array parity error", -1, 1 }, + { TFTP, "TXFT array parity error", -1, 1 }, + { TCAP, "TXCA array parity error", -1, 1 }, + { TCIP, "TXCIF array parity error", -1, 1 }, + { RCAP, "RXCA array parity error", -1, 1 }, + { OTDD, "outbound request TLP discarded", -1, 1 }, + { RDPE, "Rx data parity error", -1, 1 }, + { TDUE, "Tx uncorrectable data error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info pcie_intr_info[] = { + { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 }, + { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 }, + { MSIDATAPERR, "MSI data parity error", -1, 1 }, + { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 }, + { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 }, + { MSIXDATAPERR, "MSI-X data parity error", -1, 1 }, + { MSIXDIPERR, "MSI-X DI parity error", -1, 1 }, + { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 }, + { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 }, + { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 }, + { CCNTPERR, "PCI CMD channel count parity error", -1, 1 }, + { CREQPERR, "PCI CMD channel request parity error", -1, 1 }, + { CRSPPERR, "PCI CMD channel response parity error", -1, 1 }, + { DCNTPERR, "PCI DMA channel count parity error", -1, 1 }, + { DREQPERR, "PCI DMA channel request parity error", -1, 1 }, + { DRSPPERR, "PCI DMA channel response parity error", -1, 1 }, + { HCNTPERR, "PCI HMA channel count parity error", -1, 1 }, + { HREQPERR, "PCI HMA channel request parity error", -1, 1 }, + { HRSPPERR, "PCI HMA channel response parity error", -1, 1 }, + { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 }, + { FIDPERR, "PCI FID parity error", -1, 1 }, + { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 }, + { MATAGPERR, "PCI MA tag parity error", -1, 1 }, + { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 }, + { RXCPLPERR, "PCI Rx completion parity error", -1, 1 }, + { RXWRPERR, "PCI Rx write parity error", -1, 1 }, + { RPLPERR, "PCI replay buffer parity error", -1, 1 }, + { PCIESINT, "PCI core secondary fault", -1, 1 }, + { PCIEPINT, "PCI core primary fault", -1, 1 }, + { UNXSPLCPLERR, "PCI unexpected split completion error", -1, + 0 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, + PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + sysbus_intr_info) + + csio_handle_intr_status(hw, + PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + pcie_port_intr_info) + + csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * TP interrupt handler. + */ +static void csio_tp_intr_handler(struct csio_hw *hw) +{ + static struct intr_info tp_intr_info[] = { + { 0x3fffffff, "TP parity error", -1, 1 }, + { FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, TP_INT_CAUSE, tp_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * SGE interrupt handler. + */ +static void csio_sge_intr_handler(struct csio_hw *hw) +{ + uint64_t v; + + static struct intr_info sge_intr_info[] = { + { ERR_CPL_EXCEED_IQE_SIZE, + "SGE received CPL exceeding IQE size", -1, 1 }, + { ERR_INVALID_CIDX_INC, + "SGE GTS CIDX increment too large", -1, 0 }, + { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, + { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 }, + { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, + "SGE IQID > 1023 received CPL for FL", -1, 0 }, + { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1, + 0 }, + { ERR_ING_CTXT_PRIO, + "SGE too many priority ingress contexts", -1, 0 }, + { ERR_EGR_CTXT_PRIO, + "SGE too many priority egress contexts", -1, 0 }, + { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 }, + { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 }, + { 0, NULL, 0, 0 } + }; + + v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1) | + ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2) << 32); + if (v) { + csio_fatal(hw, "SGE parity error (%#llx)\n", + (unsigned long long)v); + csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF), + SGE_INT_CAUSE1); + csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2); + } + + v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info); + + if (csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info) || + v != 0) + csio_hw_fatal_err(hw); +} + +#define CIM_OBQ_INTR (OBQULP0PARERR | OBQULP1PARERR | OBQULP2PARERR |\ + OBQULP3PARERR | OBQSGEPARERR | OBQNCSIPARERR) +#define CIM_IBQ_INTR (IBQTP0PARERR | IBQTP1PARERR | IBQULPPARERR |\ + IBQSGEHIPARERR | IBQSGELOPARERR | IBQNCSIPARERR) + +/* + * CIM interrupt handler. + */ +static void csio_cim_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cim_intr_info[] = { + { PREFDROPINT, "CIM control register prefetch drop", -1, 1 }, + { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, + { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, + { MBUPPARERR, "CIM mailbox uP parity error", -1, 1 }, + { MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 }, + { TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 }, + { TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info cim_upintr_info[] = { + { RSVDSPACEINT, "CIM reserved space access", -1, 1 }, + { ILLTRANSINT, "CIM illegal transaction", -1, 1 }, + { ILLWRINT, "CIM illegal write", -1, 1 }, + { ILLRDINT, "CIM illegal read", -1, 1 }, + { ILLRDBEINT, "CIM illegal read BE", -1, 1 }, + { ILLWRBEINT, "CIM illegal write BE", -1, 1 }, + { SGLRDBOOTINT, "CIM single read from boot space", -1, 1 }, + { SGLWRBOOTINT, "CIM single write to boot space", -1, 1 }, + { BLKWRBOOTINT, "CIM block write to boot space", -1, 1 }, + { SGLRDFLASHINT, "CIM single read from flash space", -1, 1 }, + { SGLWRFLASHINT, "CIM single write to flash space", -1, 1 }, + { BLKWRFLASHINT, "CIM block write to flash space", -1, 1 }, + { SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 }, + { SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 }, + { BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 }, + { BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 }, + { SGLRDCTLINT , "CIM single read from CTL space", -1, 1 }, + { SGLWRCTLINT , "CIM single write to CTL space", -1, 1 }, + { BLKRDCTLINT , "CIM block read from CTL space", -1, 1 }, + { BLKWRCTLINT , "CIM block write to CTL space", -1, 1 }, + { SGLRDPLINT , "CIM single read from PL space", -1, 1 }, + { SGLWRPLINT , "CIM single write to PL space", -1, 1 }, + { BLKRDPLINT , "CIM block read from PL space", -1, 1 }, + { BLKWRPLINT , "CIM block write to PL space", -1, 1 }, + { REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 }, + { RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 }, + { TIMEOUTINT , "CIM PIF timeout", -1, 1 }, + { TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE, + cim_intr_info) + + csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE, + cim_upintr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * ULP RX interrupt handler. + */ +static void csio_ulprx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulprx_intr_info[] = { + { 0x1800000, "ULPRX context error", -1, 1 }, + { 0x7fffff, "ULPRX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE, ulprx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * ULP TX interrupt handler. + */ +static void csio_ulptx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulptx_intr_info[] = { + { PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1, + 0 }, + { 0xfffffff, "ULPTX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE, ulptx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM TX interrupt handler. + */ +static void csio_pmtx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmtx_intr_info[] = { + { PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 }, + { ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 }, + { 0xffffff0, "PMTX framing error", -1, 1 }, + { OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, + 1 }, + { ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 }, + { C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE, pmtx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM RX interrupt handler. + */ +static void csio_pmrx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmrx_intr_info[] = { + { ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 }, + { 0x3ffff0, "PMRX framing error", -1, 1 }, + { OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, + 1 }, + { IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 }, + { E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE, pmrx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * CPL switch interrupt handler. + */ +static void csio_cplsw_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cplsw_intr_info[] = { + { CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 }, + { CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 }, + { TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 }, + { SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 }, + { CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 }, + { ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, CPL_INTR_CAUSE, cplsw_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * LE interrupt handler. + */ +static void csio_le_intr_handler(struct csio_hw *hw) +{ + static struct intr_info le_intr_info[] = { + { LIPMISS, "LE LIP miss", -1, 0 }, + { LIP0, "LE 0 LIP error", -1, 0 }, + { PARITYERR, "LE parity error", -1, 1 }, + { UNKNOWNCMD, "LE unknown command", -1, 1 }, + { REQQPARERR, "LE request queue parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE, le_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * MPS interrupt handler. + */ +static void csio_mps_intr_handler(struct csio_hw *hw) +{ + static struct intr_info mps_rx_intr_info[] = { + { 0xffffff, "MPS Rx parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_tx_intr_info[] = { + { TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 }, + { NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 }, + { TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 }, + { TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 }, + { BUBBLE, "MPS Tx underflow", -1, 1 }, + { SECNTERR, "MPS Tx SOP/EOP error", -1, 1 }, + { FRMERR, "MPS Tx framing error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_trc_intr_info[] = { + { FILTMEM, "MPS TRC filter parity error", -1, 1 }, + { PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 }, + { MISCPERR, "MPS TRC misc parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_sram_intr_info[] = { + { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_tx_intr_info[] = { + { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_rx_intr_info[] = { + { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_cls_intr_info[] = { + { MATCHSRAM, "MPS match SRAM parity error", -1, 1 }, + { MATCHTCAM, "MPS match TCAM parity error", -1, 1 }, + { HASHSRAM, "MPS hash SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE, + mps_rx_intr_info) + + csio_handle_intr_status(hw, MPS_TX_INT_CAUSE, + mps_tx_intr_info) + + csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE, + mps_trc_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM, + mps_stat_sram_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO, + mps_stat_tx_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO, + mps_stat_rx_intr_info) + + csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE, + mps_cls_intr_info); + + csio_wr_reg32(hw, 0, MPS_INT_CAUSE); + csio_rd_reg32(hw, MPS_INT_CAUSE); /* flush */ + if (fat) + csio_hw_fatal_err(hw); +} + +#define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE) + +/* + * EDC/MC interrupt handler. + */ +static void csio_mem_intr_handler(struct csio_hw *hw, int idx) +{ + static const char name[3][5] = { "EDC0", "EDC1", "MC" }; + + unsigned int addr, cnt_addr, v; + + if (idx <= MEM_EDC1) { + addr = EDC_REG(EDC_INT_CAUSE, idx); + cnt_addr = EDC_REG(EDC_ECC_STATUS, idx); + } else { + addr = MC_INT_CAUSE; + cnt_addr = MC_ECC_STATUS; + } + + v = csio_rd_reg32(hw, addr) & MEM_INT_MASK; + if (v & PERR_INT_CAUSE) + csio_fatal(hw, "%s FIFO parity error\n", name[idx]); + if (v & ECC_CE_INT_CAUSE) { + uint32_t cnt = ECC_CECNT_GET(csio_rd_reg32(hw, cnt_addr)); + + csio_wr_reg32(hw, ECC_CECNT_MASK, cnt_addr); + csio_warn(hw, "%u %s correctable ECC data error%s\n", + cnt, name[idx], cnt > 1 ? "s" : ""); + } + if (v & ECC_UE_INT_CAUSE) + csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]); + + csio_wr_reg32(hw, v, addr); + if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE)) + csio_hw_fatal_err(hw); +} + +/* + * MA interrupt handler. + */ +static void csio_ma_intr_handler(struct csio_hw *hw) +{ + uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE); + + if (status & MEM_PERR_INT_CAUSE) + csio_fatal(hw, "MA parity error, parity status %#x\n", + csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS)); + if (status & MEM_WRAP_INT_CAUSE) { + v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS); + csio_fatal(hw, + "MA address wrap-around error by client %u to address %#x\n", + MEM_WRAP_CLIENT_NUM_GET(v), MEM_WRAP_ADDRESS_GET(v) << 4); + } + csio_wr_reg32(hw, status, MA_INT_CAUSE); + csio_hw_fatal_err(hw); +} + +/* + * SMB interrupt handler. + */ +static void csio_smb_intr_handler(struct csio_hw *hw) +{ + static struct intr_info smb_intr_info[] = { + { MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 }, + { MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 }, + { SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, SMB_INT_CAUSE, smb_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * NC-SI interrupt handler. + */ +static void csio_ncsi_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ncsi_intr_info[] = { + { CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 }, + { MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 }, + { TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 }, + { RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, NCSI_INT_CAUSE, ncsi_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * XGMAC interrupt handler. + */ +static void csio_xgmac_intr_handler(struct csio_hw *hw, int port) +{ + uint32_t v = csio_rd_reg32(hw, PORT_REG(port, XGMAC_PORT_INT_CAUSE)); + + v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR; + if (!v) + return; + + if (v & TXFIFO_PRTY_ERR) + csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port); + if (v & RXFIFO_PRTY_ERR) + csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port); + csio_wr_reg32(hw, v, PORT_REG(port, XGMAC_PORT_INT_CAUSE)); + csio_hw_fatal_err(hw); +} + +/* + * PL interrupt handler. + */ +static void csio_pl_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pl_intr_info[] = { + { FATALPERR, "T4 fatal parity error", -1, 1 }, + { PERRVFID, "PL VFID_MAP parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE, pl_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * csio_hw_slow_intr_handler - control path interrupt handler + * @hw: HW module + * + * Interrupt handler for non-data global interrupt events, e.g., errors. + * The designation 'slow' is because it involves register reads, while + * data interrupts typically don't involve any MMIOs. + */ +int +csio_hw_slow_intr_handler(struct csio_hw *hw) +{ + uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE); + + if (!(cause & CSIO_GLBL_INTR_MASK)) { + CSIO_INC_STATS(hw, n_plint_unexp); + return 0; + } + + csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause); + + CSIO_INC_STATS(hw, n_plint_cnt); + + if (cause & CIM) + csio_cim_intr_handler(hw); + + if (cause & MPS) + csio_mps_intr_handler(hw); + + if (cause & NCSI) + csio_ncsi_intr_handler(hw); + + if (cause & PL) + csio_pl_intr_handler(hw); + + if (cause & SMB) + csio_smb_intr_handler(hw); + + if (cause & XGMAC0) + csio_xgmac_intr_handler(hw, 0); + + if (cause & XGMAC1) + csio_xgmac_intr_handler(hw, 1); + + if (cause & XGMAC_KR0) + csio_xgmac_intr_handler(hw, 2); + + if (cause & XGMAC_KR1) + csio_xgmac_intr_handler(hw, 3); + + if (cause & PCIE) + csio_pcie_intr_handler(hw); + + if (cause & MC) + csio_mem_intr_handler(hw, MEM_MC); + + if (cause & EDC0) + csio_mem_intr_handler(hw, MEM_EDC0); + + if (cause & EDC1) + csio_mem_intr_handler(hw, MEM_EDC1); + + if (cause & LE) + csio_le_intr_handler(hw); + + if (cause & TP) + csio_tp_intr_handler(hw); + + if (cause & MA) + csio_ma_intr_handler(hw); + + if (cause & PM_TX) + csio_pmtx_intr_handler(hw); + + if (cause & PM_RX) + csio_pmrx_intr_handler(hw); + + if (cause & ULP_RX) + csio_ulprx_intr_handler(hw); + + if (cause & CPL_SWITCH) + csio_cplsw_intr_handler(hw); + + if (cause & SGE) + csio_sge_intr_handler(hw); + + if (cause & ULP_TX) + csio_ulptx_intr_handler(hw); + + /* Clear the interrupts just processed for which we are the master. */ + csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE); + csio_rd_reg32(hw, PL_INT_CAUSE); /* flush */ + + return 1; +} + +/***************************************************************************** + * HW <--> mailbox interfacing routines. + ****************************************************************************/ +/* + * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions + * + * @data: Private data pointer. + * + * Called from worker thread context. + */ +static void +csio_mberr_worker(void *data) +{ + struct csio_hw *hw = (struct csio_hw *)data; + struct csio_mbm *mbm = &hw->mbm; + LIST_HEAD(cbfn_q); + struct csio_mb *mbp_next; + int rv; + + del_timer_sync(&mbm->timer); + + spin_lock_irq(&hw->lock); + if (list_empty(&mbm->cbfn_q)) { + spin_unlock_irq(&hw->lock); + return; + } + + list_splice_tail_init(&mbm->cbfn_q, &cbfn_q); + mbm->stats.n_cbfnq = 0; + + /* Try to start waiting mailboxes */ + if (!list_empty(&mbm->req_q)) { + mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list); + list_del_init(&mbp_next->list); + + rv = csio_mb_issue(hw, mbp_next); + if (rv != 0) + list_add_tail(&mbp_next->list, &mbm->req_q); + else + CSIO_DEC_STATS(mbm, n_activeq); + } + spin_unlock_irq(&hw->lock); + + /* Now callback completions */ + csio_mb_completions(hw, &cbfn_q); +} + +/* + * csio_hw_mb_timer - Top-level Mailbox timeout handler. + * + * @data: private data pointer + * + **/ +static void +csio_hw_mb_timer(uintptr_t data) +{ + struct csio_hw *hw = (struct csio_hw *)data; + struct csio_mb *mbp = NULL; + + spin_lock_irq(&hw->lock); + mbp = csio_mb_tmo_handler(hw); + spin_unlock_irq(&hw->lock); + + /* Call back the function for the timed-out Mailbox */ + if (mbp) + mbp->mb_cbfn(hw, mbp); + +} + +/* + * csio_hw_mbm_cleanup - Cleanup Mailbox module. + * @hw: HW module + * + * Called with lock held, should exit with lock held. + * Cancels outstanding mailboxes (waiting, in-flight) and gathers them + * into a local queue. Drops lock and calls the completions. Holds + * lock and returns. + */ +static void +csio_hw_mbm_cleanup(struct csio_hw *hw) +{ + LIST_HEAD(cbfn_q); + + csio_mb_cancel_all(hw, &cbfn_q); + + spin_unlock_irq(&hw->lock); + csio_mb_completions(hw, &cbfn_q); + spin_lock_irq(&hw->lock); +} + +/***************************************************************************** + * Event handling + ****************************************************************************/ +int +csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len) +{ + struct csio_evt_msg *evt_entry = NULL; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + if (hw->flags & CSIO_HWF_FWEVT_STOP) + return -EINVAL; + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + return -ENOMEM; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + memcpy((void *)evt_entry->data, evt_msg, len); + list_add_tail(&evt_entry->list, &hw->evt_active_q); + + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); + + return 0; +} + +static int +csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len, bool msg_sg) +{ + struct csio_evt_msg *evt_entry = NULL; + struct csio_fl_dma_buf *fl_sg; + uint32_t off = 0; + unsigned long flags; + int n, ret = 0; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->flags & CSIO_HWF_FWEVT_STOP) { + ret = -EINVAL; + goto out; + } + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + ret = -ENOMEM; + goto out; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + + /* If Payload in SG list*/ + if (msg_sg) { + fl_sg = (struct csio_fl_dma_buf *) evt_msg; + for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) { + memcpy((void *)((uintptr_t)evt_entry->data + off), + fl_sg->flbufs[n].vaddr, + fl_sg->flbufs[n].len); + off += fl_sg->flbufs[n].len; + } + } else + memcpy((void *)evt_entry->data, evt_msg, len); + + list_add_tail(&evt_entry->list, &hw->evt_active_q); + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); +out: + spin_unlock_irqrestore(&hw->lock, flags); + return ret; +} + +static void +csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry) +{ + if (evt_entry) { + spin_lock_irq(&hw->lock); + list_del_init(&evt_entry->list); + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_DEC_STATS(hw, n_evt_activeq); + CSIO_INC_STATS(hw, n_evt_freeq); + spin_unlock_irq(&hw->lock); + } +} + +void +csio_evtq_flush(struct csio_hw *hw) +{ + uint32_t count; + count = 30; + while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING)); +} + +static void +csio_evtq_stop(struct csio_hw *hw) +{ + hw->flags |= CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_start(struct csio_hw *hw) +{ + hw->flags &= ~CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_cleanup(struct csio_hw *hw) +{ + struct list_head *evt_entry, *next_entry; + + /* Release outstanding events from activeq to freeq*/ + if (!list_empty(&hw->evt_active_q)) + list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q); + + hw->stats.n_evt_activeq = 0; + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + + /* Freeup event entry */ + list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) { + kfree(evt_entry); + CSIO_DEC_STATS(hw, n_evt_freeq); + } + + hw->stats.n_evt_freeq = 0; +} + + +static void +csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv) +{ + __u8 op; + __be64 *data; + void *msg = NULL; + uint32_t msg_len = 0; + bool msg_sg = 0; + + op = ((struct rss_header *) wr)->opcode; + if (op == CPL_FW6_PLD) { + CSIO_INC_STATS(hw, n_cpl_fw6_pld); + if (!flb || !flb->totlen) { + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + msg = (void *) flb; + msg_len = flb->totlen; + msg_sg = 1; + + data = (__be64 *) msg; + } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) { + + CSIO_INC_STATS(hw, n_cpl_fw6_msg); + /* skip RSS header */ + msg = (void *)((uintptr_t)wr + sizeof(__be64)); + msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) : + sizeof(struct cpl_fw4_msg); + + data = (__be64 *) msg; + } else { + csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op); + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + /* + * Enqueue event to EventQ. Events processing happens + * in Event worker thread context + */ + if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg, + (uint16_t)msg_len, msg_sg)) + CSIO_INC_STATS(hw, n_evt_drop); +} + +void +csio_evtq_worker(struct work_struct *work) +{ + struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work); + struct list_head *evt_entry, *next_entry; + LIST_HEAD(evt_q); + struct csio_evt_msg *evt_msg; + struct cpl_fw6_msg *msg; + struct csio_rnode *rn; + int rv = 0; + uint8_t evtq_stop = 0; + + csio_dbg(hw, "event worker thread active evts#%d\n", + hw->stats.n_evt_activeq); + + spin_lock_irq(&hw->lock); + while (!list_empty(&hw->evt_active_q)) { + list_splice_tail_init(&hw->evt_active_q, &evt_q); + spin_unlock_irq(&hw->lock); + + list_for_each_safe(evt_entry, next_entry, &evt_q) { + evt_msg = (struct csio_evt_msg *) evt_entry; + + /* Drop events if queue is STOPPED */ + spin_lock_irq(&hw->lock); + if (hw->flags & CSIO_HWF_FWEVT_STOP) + evtq_stop = 1; + spin_unlock_irq(&hw->lock); + if (evtq_stop) { + CSIO_INC_STATS(hw, n_evt_drop); + goto free_evt; + } + + switch (evt_msg->type) { + case CSIO_EVT_FW: + msg = (struct cpl_fw6_msg *)(evt_msg->data); + + if ((msg->opcode == CPL_FW6_MSG || + msg->opcode == CPL_FW4_MSG) && + !msg->type) { + rv = csio_mb_fwevt_handler(hw, + msg->data); + if (!rv) + break; + /* Handle any remaining fw events */ + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else if (msg->opcode == CPL_FW6_PLD) { + + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else { + csio_warn(hw, + "Unhandled FW msg op %x type %x\n", + msg->opcode, msg->type); + CSIO_INC_STATS(hw, n_evt_drop); + } + break; + + case CSIO_EVT_MBX: + csio_mberr_worker(hw); + break; + + case CSIO_EVT_DEV_LOSS: + memcpy(&rn, evt_msg->data, sizeof(rn)); + csio_rnode_devloss_handler(rn); + break; + + default: + csio_warn(hw, "Unhandled event %x on evtq\n", + evt_msg->type); + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +free_evt: + csio_free_evt(hw, evt_msg); + } + + spin_lock_irq(&hw->lock); + } + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + spin_unlock_irq(&hw->lock); +} + +int +csio_fwevtq_handler(struct csio_hw *hw) +{ + int rv; + + if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) { + CSIO_INC_STATS(hw, n_int_stray); + return -EINVAL; + } + + rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx, + csio_process_fwevtq_entry, NULL); + return rv; +} + +/**************************************************************************** + * Entry points + ****************************************************************************/ + +/* Management module */ +/* + * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q. + * mgmt - mgmt module + * @io_req - io request + * + * Return - 0:if given IO Req exists in active Q. + * -EINVAL :if lookup fails. + */ +int +csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req) +{ + struct list_head *tmp; + + /* Lookup ioreq in the ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + if (io_req == (struct csio_ioreq *)tmp) + return 0; + } + return -EINVAL; +} + +#define ECM_MIN_TMO 1000 /* Minimum timeout value for req */ + +/* + * csio_mgmts_tmo_handler - MGMT IO Timeout handler. + * @data - Event data. + * + * Return - none. + */ +static void +csio_mgmt_tmo_handler(uintptr_t data) +{ + struct csio_mgmtm *mgmtm = (struct csio_mgmtm *) data; + struct list_head *tmp; + struct csio_ioreq *io_req; + + csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n"); + + spin_lock_irq(&mgmtm->hw->lock); + + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO); + + if (!io_req->tmo) { + /* Dequeue the request from retry Q. */ + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } else { + CSIO_DB_ASSERT(0); + } + } + } + + /* If retry queue is not empty, re-arm timer */ + if (!list_empty(&mgmtm->active_q)) + mod_timer(&mgmtm->mgmt_timer, + jiffies + msecs_to_jiffies(ECM_MIN_TMO)); + spin_unlock_irq(&mgmtm->hw->lock); +} + +static void +csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm) +{ + struct csio_hw *hw = mgmtm->hw; + struct csio_ioreq *io_req; + struct list_head *tmp; + uint32_t count; + + count = 30; + /* Wait for all outstanding req to complete gracefully */ + while ((!list_empty(&mgmtm->active_q)) && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + /* release outstanding req from ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + mgmtm->stats.n_active--; + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } + } +} + +/* + * csio_mgmt_init - Mgmt module init entry point + * @mgmtsm - mgmt module + * @hw - HW module + * + * Initialize mgmt timer, resource wait queue, active queue, + * completion q. Allocate Egress and Ingress + * WR queues and save off the queue index returned by the WR + * module for future use. Allocate and save off mgmt reqs in the + * mgmt_req_freelist for future use. Make sure their SM is initialized + * to uninit state. + * Returns: 0 - on success + * -ENOMEM - on error. + */ +static int +csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw) +{ + struct timer_list *timer = &mgmtm->mgmt_timer; + + init_timer(timer); + timer->function = csio_mgmt_tmo_handler; + timer->data = (unsigned long)mgmtm; + + INIT_LIST_HEAD(&mgmtm->active_q); + INIT_LIST_HEAD(&mgmtm->cbfn_q); + + mgmtm->hw = hw; + /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/ + + return 0; +} + +/* + * csio_mgmtm_exit - MGMT module exit entry point + * @mgmtsm - mgmt module + * + * This function called during MGMT module uninit. + * Stop timers, free ioreqs allocated. + * Returns: None + * + */ +static void +csio_mgmtm_exit(struct csio_mgmtm *mgmtm) +{ + del_timer_sync(&mgmtm->mgmt_timer); +} + + +/** + * csio_hw_start - Kicks off the HW State machine + * @hw: Pointer to HW module. + * + * It is assumed that the initialization is a synchronous operation. + * So when we return afer posting the event, the HW SM should be in + * the ready state, if there were no errors during init. + */ +int +csio_hw_start(struct csio_hw *hw) +{ + spin_lock_irq(&hw->lock); + csio_post_event(&hw->sm, CSIO_HWE_CFG); + spin_unlock_irq(&hw->lock); + + if (csio_is_hw_ready(hw)) + return 0; + else + return -EINVAL; +} + +int +csio_hw_stop(struct csio_hw *hw) +{ + csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE); + + if (csio_is_hw_removing(hw)) + return 0; + else + return -EINVAL; +} + +/* Max reset retries */ +#define CSIO_MAX_RESET_RETRIES 3 + +/** + * csio_hw_reset - Reset the hardware + * @hw: HW module. + * + * Caller should hold lock across this function. + */ +int +csio_hw_reset(struct csio_hw *hw) +{ + if (!csio_is_hw_master(hw)) + return -EPERM; + + if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) { + csio_dbg(hw, "Max hw reset attempts reached.."); + return -EINVAL; + } + + hw->rst_retries++; + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET); + + if (csio_is_hw_ready(hw)) { + hw->rst_retries = 0; + hw->stats.n_reset_start = jiffies_to_msecs(jiffies); + return 0; + } else + return -EINVAL; +} + +/* + * csio_hw_get_device_id - Caches the Adapter's vendor & device id. + * @hw: HW module. + */ +static void +csio_hw_get_device_id(struct csio_hw *hw) +{ + /* Is the adapter device id cached already ?*/ + if (csio_is_dev_id_cached(hw)) + return; + + /* Get the PCI vendor & device id */ + pci_read_config_word(hw->pdev, PCI_VENDOR_ID, + &hw->params.pci.vendor_id); + pci_read_config_word(hw->pdev, PCI_DEVICE_ID, + &hw->params.pci.device_id); + + csio_dev_id_cached(hw); + +} /* csio_hw_get_device_id */ + +/* + * csio_hw_set_description - Set the model, description of the hw. + * @hw: HW module. + * @ven_id: PCI Vendor ID + * @dev_id: PCI Device ID + */ +static void +csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id) +{ + uint32_t adap_type, prot_type; + + if (ven_id == CSIO_VENDOR_ID) { + prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK); + adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK); + + if (prot_type == CSIO_FPGA) { + memcpy(hw->model_desc, + csio_fcoe_adapters[13].description, 32); + } else if (prot_type == CSIO_T4_FCOE_ASIC) { + memcpy(hw->hw_ver, + csio_fcoe_adapters[adap_type].model_no, 16); + memcpy(hw->model_desc, + csio_fcoe_adapters[adap_type].description, 32); + } else { + char tempName[32] = "Chelsio FCoE Controller"; + memcpy(hw->model_desc, tempName, 32); + + CSIO_DB_ASSERT(0); + } + } +} /* csio_hw_set_description */ + +/** + * csio_hw_init - Initialize HW module. + * @hw: Pointer to HW module. + * + * Initialize the members of the HW module. + */ +int +csio_hw_init(struct csio_hw *hw) +{ + int rv = -EINVAL; + uint32_t i; + uint16_t ven_id, dev_id; + struct csio_evt_msg *evt_entry; + + INIT_LIST_HEAD(&hw->sm.sm_list); + csio_init_state(&hw->sm, csio_hws_uninit); + spin_lock_init(&hw->lock); + INIT_LIST_HEAD(&hw->sln_head); + + /* Get the PCI vendor & device id */ + csio_hw_get_device_id(hw); + + strcpy(hw->name, CSIO_HW_NAME); + + /* Set the model & its description */ + + ven_id = hw->params.pci.vendor_id; + dev_id = hw->params.pci.device_id; + + csio_hw_set_description(hw, ven_id, dev_id); + + /* Initialize default log level */ + hw->params.log_level = (uint32_t) csio_dbg_level; + + csio_set_fwevt_intr_idx(hw, -1); + csio_set_nondata_intr_idx(hw, -1); + + /* Init all the modules: Mailbox, WorkRequest and Transport */ + if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer)) + goto err; + + rv = csio_wrm_init(csio_hw_to_wrm(hw), hw); + if (rv) + goto err_mbm_exit; + + rv = csio_scsim_init(csio_hw_to_scsim(hw), hw); + if (rv) + goto err_wrm_exit; + + rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw); + if (rv) + goto err_scsim_exit; + /* Pre-allocate evtq and initialize them */ + INIT_LIST_HEAD(&hw->evt_active_q); + INIT_LIST_HEAD(&hw->evt_free_q); + for (i = 0; i < csio_evtq_sz; i++) { + + evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL); + if (!evt_entry) { + csio_err(hw, "Failed to initialize eventq"); + goto err_evtq_cleanup; + } + + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_INC_STATS(hw, n_evt_freeq); + } + + hw->dev_num = dev_num; + dev_num++; + + return 0; + +err_evtq_cleanup: + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); +err_scsim_exit: + csio_scsim_exit(csio_hw_to_scsim(hw)); +err_wrm_exit: + csio_wrm_exit(csio_hw_to_wrm(hw), hw); +err_mbm_exit: + csio_mbm_exit(csio_hw_to_mbm(hw)); +err: + return rv; +} + +/** + * csio_hw_exit - Un-initialize HW module. + * @hw: Pointer to HW module. + * + */ +void +csio_hw_exit(struct csio_hw *hw) +{ + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); + csio_scsim_exit(csio_hw_to_scsim(hw)); + csio_wrm_exit(csio_hw_to_wrm(hw), hw); + csio_mbm_exit(csio_hw_to_mbm(hw)); +} diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h new file mode 100644 index 0000000..9edcca4 --- /dev/null +++ b/drivers/scsi/csiostor/csio_hw.h @@ -0,0 +1,665 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_HW_H__ +#define __CSIO_HW_H__ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/workqueue.h> +#include <linux/compiler.h> +#include <linux/cdev.h> +#include <linux/list.h> +#include <linux/mempool.h> +#include <linux/io.h> +#include <linux/spinlock_types.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> + +#include "csio_wr.h" +#include "csio_mb.h" +#include "csio_scsi.h" +#include "csio_defs.h" +#include "t4_regs.h" +#include "t4_msg.h" + +/* + * An error value used by host. Should not clash with FW defined return values. + */ +#define FW_HOSTERROR 255 + +#define CSIO_FW_FNAME "cxgb4/t4fw.bin" +#define CSIO_CF_FNAME "cxgb4/t4-config.txt" + +#define FW_VERSION_MAJOR 1 +#define FW_VERSION_MINOR 2 +#define FW_VERSION_MICRO 8 + +#define CSIO_HW_NAME "Chelsio FCoE Adapter" +#define CSIO_MAX_PFN 8 +#define CSIO_MAX_PPORTS 4 + +#define CSIO_MAX_LUN 0xFFFF +#define CSIO_MAX_QUEUE 2048 +#define CSIO_MAX_CMD_PER_LUN 32 +#define CSIO_MAX_DDP_BUF_SIZE (1024 * 1024) +#define CSIO_MAX_SECTOR_SIZE 128 + +/* Interrupts */ +#define CSIO_EXTRA_MSI_IQS 2 /* Extra iqs for INTX/MSI mode + * (Forward intr iq + fw iq) */ +#define CSIO_EXTRA_VECS 2 /* non-data + FW evt */ +#define CSIO_MAX_SCSI_CPU 128 +#define CSIO_MAX_SCSI_QSETS (CSIO_MAX_SCSI_CPU * CSIO_MAX_PPORTS) +#define CSIO_MAX_MSIX_VECS (CSIO_MAX_SCSI_QSETS + CSIO_EXTRA_VECS) + +/* Queues */ +enum { + CSIO_INTR_WRSIZE = 128, + CSIO_INTR_IQSIZE = ((CSIO_MAX_MSIX_VECS + 1) * CSIO_INTR_WRSIZE), + CSIO_FWEVT_WRSIZE = 128, + CSIO_FWEVT_IQLEN = 128, + CSIO_FWEVT_FLBUFS = 64, + CSIO_FWEVT_IQSIZE = (CSIO_FWEVT_WRSIZE * CSIO_FWEVT_IQLEN), + CSIO_HW_NIQ = 1, + CSIO_HW_NFLQ = 1, + CSIO_HW_NEQ = 1, + CSIO_HW_NINTXQ = 1, +}; + +struct csio_msix_entries { + unsigned short vector; /* Vector assigned by pci_enable_msix */ + void *dev_id; /* Priv object associated w/ this msix*/ + char desc[24]; /* Description of this vector */ +}; + +struct csio_scsi_qset { + int iq_idx; /* Ingress index */ + int eq_idx; /* Egress index */ + uint32_t intr_idx; /* MSIX Vector index */ +}; + +struct csio_scsi_cpu_info { + int16_t max_cpus; +}; + +extern int csio_dbg_level; +extern int csio_force_master; +extern unsigned int csio_port_mask; +extern int csio_msi; + +#define CSIO_VENDOR_ID 0x1425 +#define CSIO_ASIC_DEVID_PROTO_MASK 0xFF00 +#define CSIO_ASIC_DEVID_TYPE_MASK 0x00FF +#define CSIO_FPGA 0xA000 +#define CSIO_T4_FCOE_ASIC 0x4600 + +#define CSIO_GLBL_INTR_MASK (CIM | MPS | PL | PCIE | MC | EDC0 | \ + EDC1 | LE | TP | MA | PM_TX | PM_RX | \ + ULP_RX | CPL_SWITCH | SGE | \ + ULP_TX | SF) + +/* + * Hard parameters used to initialize the card in the absence of a + * configuration file. + */ +enum { + /* General */ + CSIO_SGE_DBFIFO_INT_THRESH = 10, + + CSIO_SGE_RX_DMA_OFFSET = 2, + + CSIO_SGE_FLBUF_SIZE1 = 65536, + CSIO_SGE_FLBUF_SIZE2 = 1536, + CSIO_SGE_FLBUF_SIZE3 = 9024, + CSIO_SGE_FLBUF_SIZE4 = 9216, + CSIO_SGE_FLBUF_SIZE5 = 2048, + CSIO_SGE_FLBUF_SIZE6 = 128, + CSIO_SGE_FLBUF_SIZE7 = 8192, + CSIO_SGE_FLBUF_SIZE8 = 16384, + + CSIO_SGE_TIMER_VAL_0 = 5, + CSIO_SGE_TIMER_VAL_1 = 10, + CSIO_SGE_TIMER_VAL_2 = 20, + CSIO_SGE_TIMER_VAL_3 = 50, + CSIO_SGE_TIMER_VAL_4 = 100, + CSIO_SGE_TIMER_VAL_5 = 200, + + CSIO_SGE_INT_CNT_VAL_0 = 1, + CSIO_SGE_INT_CNT_VAL_1 = 4, + CSIO_SGE_INT_CNT_VAL_2 = 8, + CSIO_SGE_INT_CNT_VAL_3 = 16, + + /* Storage specific - used by FW_PFVF_CMD */ + CSIO_WX_CAPS = FW_CMD_CAP_PF, /* w/x all */ + CSIO_R_CAPS = FW_CMD_CAP_PF, /* r all */ + CSIO_NVI = 4, + CSIO_NIQ_FLINT = 34, + CSIO_NETH_CTRL = 32, + CSIO_NEQ = 66, + CSIO_NEXACTF = 32, + CSIO_CMASK = FW_PFVF_CMD_CMASK_MASK, + CSIO_PMASK = FW_PFVF_CMD_PMASK_MASK, +}; + +/* Slowpath events */ +enum csio_evt { + CSIO_EVT_FW = 0, /* FW event */ + CSIO_EVT_MBX, /* MBX event */ + CSIO_EVT_SCN, /* State change notification */ + CSIO_EVT_DEV_LOSS, /* Device loss event */ + CSIO_EVT_MAX, /* Max supported event */ +}; + +#define CSIO_EVT_MSG_SIZE 512 +#define CSIO_EVTQ_SIZE 512 + +/* Event msg */ +struct csio_evt_msg { + struct list_head list; /* evt queue*/ + enum csio_evt type; + uint8_t data[CSIO_EVT_MSG_SIZE]; +}; + +enum { + EEPROMVSIZE = 32768, /* Serial EEPROM virtual address space size */ + SERNUM_LEN = 16, /* Serial # length */ + EC_LEN = 16, /* E/C length */ + ID_LEN = 16, /* ID length */ + TRACE_LEN = 112, /* length of trace data and mask */ +}; + +enum { + SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ + SF_SIZE = SF_SEC_SIZE * 16, /* serial flash size */ +}; + +enum { MEM_EDC0, MEM_EDC1, MEM_MC }; + +enum { + MEMWIN0_APERTURE = 2048, + MEMWIN0_BASE = 0x1b800, + MEMWIN1_APERTURE = 32768, + MEMWIN1_BASE = 0x28000, + MEMWIN2_APERTURE = 65536, + MEMWIN2_BASE = 0x30000, +}; + +/* serial flash and firmware constants */ +enum { + SF_ATTEMPTS = 10, /* max retries for SF operations */ + + /* flash command opcodes */ + SF_PROG_PAGE = 2, /* program page */ + SF_WR_DISABLE = 4, /* disable writes */ + SF_RD_STATUS = 5, /* read status register */ + SF_WR_ENABLE = 6, /* enable writes */ + SF_RD_DATA_FAST = 0xb, /* read flash */ + SF_RD_ID = 0x9f, /* read ID */ + SF_ERASE_SECTOR = 0xd8, /* erase sector */ + + FW_START_SEC = 8, /* first flash sector for FW */ + FW_END_SEC = 15, /* last flash sector for FW */ + FW_IMG_START = FW_START_SEC * SF_SEC_SIZE, + FW_MAX_SIZE = (FW_END_SEC - FW_START_SEC + 1) * SF_SEC_SIZE, + + FLASH_CFG_MAX_SIZE = 0x10000 , /* max size of the flash config file*/ + FLASH_CFG_OFFSET = 0x1f0000, + FLASH_CFG_START_SEC = FLASH_CFG_OFFSET / SF_SEC_SIZE, + FPGA_FLASH_CFG_OFFSET = 0xf0000 , /* if FPGA mode, then cfg file is + * at 1MB - 64KB */ + FPGA_FLASH_CFG_START_SEC = FPGA_FLASH_CFG_OFFSET / SF_SEC_SIZE, +}; + +/* + * Flash layout. + */ +#define FLASH_START(start) ((start) * SF_SEC_SIZE) +#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) + +enum { + /* + * Location of firmware image in FLASH. + */ + FLASH_FW_START_SEC = 8, + FLASH_FW_NSECS = 8, + FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), + FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), + +}; + +#undef FLASH_START +#undef FLASH_MAX_SIZE + +/* Management module */ +enum { + CSIO_MGMT_EQ_WRSIZE = 512, + CSIO_MGMT_IQ_WRSIZE = 128, + CSIO_MGMT_EQLEN = 64, + CSIO_MGMT_IQLEN = 64, +}; + +#define CSIO_MGMT_EQSIZE (CSIO_MGMT_EQLEN * CSIO_MGMT_EQ_WRSIZE) +#define CSIO_MGMT_IQSIZE (CSIO_MGMT_IQLEN * CSIO_MGMT_IQ_WRSIZE) + +/* mgmt module stats */ +struct csio_mgmtm_stats { + uint32_t n_abort_req; /* Total abort request */ + uint32_t n_abort_rsp; /* Total abort response */ + uint32_t n_close_req; /* Total close request */ + uint32_t n_close_rsp; /* Total close response */ + uint32_t n_err; /* Total Errors */ + uint32_t n_drop; /* Total request dropped */ + uint32_t n_active; /* Count of active_q */ + uint32_t n_cbfn; /* Count of cbfn_q */ +}; + +/* MGMT module */ +struct csio_mgmtm { + struct csio_hw *hw; /* Pointer to HW moduel */ + int eq_idx; /* Egress queue index */ + int iq_idx; /* Ingress queue index */ + int msi_vec; /* MSI vector */ + struct list_head active_q; /* Outstanding ELS/CT */ + struct list_head abort_q; /* Outstanding abort req */ + struct list_head cbfn_q; /* Completion queue */ + struct list_head mgmt_req_freelist; /* Free poll of reqs */ + /* ELSCT request freelist*/ + struct timer_list mgmt_timer; /* MGMT timer */ + struct csio_mgmtm_stats stats; /* ELS/CT stats */ +}; + +struct csio_adap_desc { + char model_no[16]; + char description[32]; +}; + +struct pci_params { + uint16_t vendor_id; + uint16_t device_id; + uint32_t vpd_cap_addr; + uint16_t speed; + uint8_t width; +}; + +/* User configurable hw parameters */ +struct csio_hw_params { + uint32_t sf_size; /* serial flash + * size in bytes + */ + uint32_t sf_nsec; /* # of flash sectors */ + struct pci_params pci; + uint32_t log_level; /* Module-level for + * debug log. + */ +}; + +struct csio_vpd { + uint32_t cclk; + uint8_t ec[EC_LEN + 1]; + uint8_t sn[SERNUM_LEN + 1]; + uint8_t id[ID_LEN + 1]; +}; + +struct csio_pport { + uint16_t pcap; + uint8_t portid; + uint8_t link_status; + uint16_t link_speed; + uint8_t mac[6]; + uint8_t mod_type; + uint8_t rsvd1; + uint8_t rsvd2; + uint8_t rsvd3; +}; + +/* fcoe resource information */ +struct csio_fcoe_res_info { + uint16_t e_d_tov; + uint16_t r_a_tov_seq; + uint16_t r_a_tov_els; + uint16_t r_r_tov; + uint32_t max_xchgs; + uint32_t max_ssns; + uint32_t used_xchgs; + uint32_t used_ssns; + uint32_t max_fcfs; + uint32_t max_vnps; + uint32_t used_fcfs; + uint32_t used_vnps; +}; + +/* HW State machine Events */ +enum csio_hw_ev { + CSIO_HWE_CFG = (uint32_t)1, /* Starts off the State machine */ + CSIO_HWE_INIT, /* Config done, start Init */ + CSIO_HWE_INIT_DONE, /* Init Mailboxes sent, HW ready */ + CSIO_HWE_FATAL, /* Fatal error during initialization */ + CSIO_HWE_PCIERR_DETECTED,/* PCI error recovery detetced */ + CSIO_HWE_PCIERR_SLOT_RESET, /* Slot reset after PCI recoviery */ + CSIO_HWE_PCIERR_RESUME, /* Resume after PCI error recovery */ + CSIO_HWE_QUIESCED, /* HBA quiesced */ + CSIO_HWE_HBA_RESET, /* HBA reset requested */ + CSIO_HWE_HBA_RESET_DONE, /* HBA reset completed */ + CSIO_HWE_FW_DLOAD, /* FW download requested */ + CSIO_HWE_PCI_REMOVE, /* PCI de-instantiation */ + CSIO_HWE_SUSPEND, /* HW suspend for Online(hot) replacement */ + CSIO_HWE_RESUME, /* HW resume for Online(hot) replacement */ + CSIO_HWE_MAX, /* Max HW event */ +}; + +/* hw stats */ +struct csio_hw_stats { + uint32_t n_evt_activeq; /* Number of event in active Q */ + uint32_t n_evt_freeq; /* Number of event in free Q */ + uint32_t n_evt_drop; /* Number of event droped */ + uint32_t n_evt_unexp; /* Number of unexpected events */ + uint32_t n_pcich_offline;/* Number of pci channel offline */ + uint32_t n_lnlkup_miss; /* Number of lnode lookup miss */ + uint32_t n_cpl_fw6_msg; /* Number of cpl fw6 message*/ + uint32_t n_cpl_fw6_pld; /* Number of cpl fw6 payload*/ + uint32_t n_cpl_unexp; /* Number of unexpected cpl */ + uint32_t n_mbint_unexp; /* Number of unexpected mbox */ + /* interrupt */ + uint32_t n_plint_unexp; /* Number of unexpected PL */ + /* interrupt */ + uint32_t n_plint_cnt; /* Number of PL interrupt */ + uint32_t n_int_stray; /* Number of stray interrupt */ + uint32_t n_err; /* Number of hw errors */ + uint32_t n_err_fatal; /* Number of fatal errors */ + uint32_t n_err_nomem; /* Number of memory alloc failure */ + uint32_t n_err_io; /* Number of IO failure */ + enum csio_hw_ev n_evt_sm[CSIO_HWE_MAX]; /* Number of sm events */ + uint64_t n_reset_start; /* Start time after the reset */ + uint32_t rsvd1; +}; + +/* Defines for hw->flags */ +#define CSIO_HWF_MASTER 0x00000001 /* This is the Master + * function for the + * card. + */ +#define CSIO_HWF_HW_INTR_ENABLED 0x00000002 /* Are HW Interrupt + * enable bit set? + */ +#define CSIO_HWF_FWEVT_PENDING 0x00000004 /* FW events pending */ +#define CSIO_HWF_Q_MEM_ALLOCED 0x00000008 /* Queues have been + * allocated memory. + */ +#define CSIO_HWF_Q_FW_ALLOCED 0x00000010 /* Queues have been + * allocated in FW. + */ +#define CSIO_HWF_VPD_VALID 0x00000020 /* Valid VPD copied */ +#define CSIO_HWF_DEVID_CACHED 0X00000040 /* PCI vendor & device + * id cached */ +#define CSIO_HWF_FWEVT_STOP 0x00000080 /* Stop processing + * FW events + */ +#define CSIO_HWF_USING_SOFT_PARAMS 0x00000100 /* Using FW config + * params + */ +#define CSIO_HWF_HOST_INTR_ENABLED 0x00000200 /* Are host interrupts + * enabled? + */ + +#define csio_is_hw_intr_enabled(__hw) \ + ((__hw)->flags & CSIO_HWF_HW_INTR_ENABLED) +#define csio_is_host_intr_enabled(__hw) \ + ((__hw)->flags & CSIO_HWF_HOST_INTR_ENABLED) +#define csio_is_hw_master(__hw) ((__hw)->flags & CSIO_HWF_MASTER) +#define csio_is_valid_vpd(__hw) ((__hw)->flags & CSIO_HWF_VPD_VALID) +#define csio_is_dev_id_cached(__hw) ((__hw)->flags & CSIO_HWF_DEVID_CACHED) +#define csio_valid_vpd_copied(__hw) ((__hw)->flags |= CSIO_HWF_VPD_VALID) +#define csio_dev_id_cached(__hw) ((__hw)->flags |= CSIO_HWF_DEVID_CACHED) + +/* Defines for intr_mode */ +enum csio_intr_mode { + CSIO_IM_NONE = 0, + CSIO_IM_INTX = 1, + CSIO_IM_MSI = 2, + CSIO_IM_MSIX = 3, +}; + +/* Master HW structure: One per function */ +struct csio_hw { + struct csio_sm sm; /* State machine: should + * be the 1st member. + */ + spinlock_t lock; /* Lock for hw */ + + struct csio_scsim scsim; /* SCSI module*/ + struct csio_wrm wrm; /* Work request module*/ + struct pci_dev *pdev; /* PCI device */ + + void __iomem *regstart; /* Virtual address of + * register map + */ + /* SCSI queue sets */ + uint32_t num_sqsets; /* Number of SCSI + * queue sets */ + uint32_t num_scsi_msix_cpus; /* Number of CPUs that + * will be used + * for ingress + * processing. + */ + + struct csio_scsi_qset sqset[CSIO_MAX_PPORTS][CSIO_MAX_SCSI_CPU]; + struct csio_scsi_cpu_info scsi_cpu_info[CSIO_MAX_PPORTS]; + + uint32_t evtflag; /* Event flag */ + uint32_t flags; /* HW flags */ + + struct csio_mgmtm mgmtm; /* management module */ + struct csio_mbm mbm; /* Mailbox module */ + + /* Lnodes */ + uint32_t num_lns; /* Number of lnodes */ + struct csio_lnode *rln; /* Root lnode */ + struct list_head sln_head; /* Sibling node list + * list + */ + int intr_iq_idx; /* Forward interrupt + * queue. + */ + int fwevt_iq_idx; /* FW evt queue */ + struct work_struct evtq_work; /* Worker thread for + * HW events. + */ + struct list_head evt_free_q; /* freelist of evt + * elements + */ + struct list_head evt_active_q; /* active evt queue*/ + + /* board related info */ + char name[32]; + char hw_ver[16]; + char model_desc[32]; + char drv_version[32]; + char fwrev_str[32]; + uint32_t optrom_ver; + uint32_t fwrev; + uint32_t tp_vers; + char chip_ver; + uint32_t cfg_finiver; + uint32_t cfg_finicsum; + uint32_t cfg_cfcsum; + uint8_t cfg_csum_status; + uint8_t cfg_store; + enum csio_dev_state fw_state; + struct csio_vpd vpd; + + uint8_t pfn; /* Physical Function + * number + */ + uint32_t port_vec; /* Port vector */ + uint8_t num_pports; /* Number of physical + * ports. + */ + uint8_t rst_retries; /* Reset retries */ + uint8_t cur_evt; /* current s/m evt */ + uint8_t prev_evt; /* Previous s/m evt */ + uint32_t dev_num; /* device number */ + struct csio_pport pport[CSIO_MAX_PPORTS]; /* Ports (XGMACs) */ + struct csio_hw_params params; /* Hw parameters */ + + struct pci_pool *scsi_pci_pool; /* PCI pool for SCSI */ + mempool_t *mb_mempool; /* Mailbox memory pool*/ + mempool_t *rnode_mempool; /* rnode memory pool */ + + /* Interrupt */ + enum csio_intr_mode intr_mode; /* INTx, MSI, MSIX */ + uint32_t fwevt_intr_idx; /* FW evt MSIX/interrupt + * index + */ + uint32_t nondata_intr_idx; /* nondata MSIX/intr + * idx + */ + + uint8_t cfg_neq; /* FW configured no of + * egress queues + */ + uint8_t cfg_niq; /* FW configured no of + * iq queues. + */ + + struct csio_fcoe_res_info fres_info; /* Fcoe resource info */ + + /* MSIX vectors */ + struct csio_msix_entries msix_entries[CSIO_MAX_MSIX_VECS]; + + struct dentry *debugfs_root; /* Debug FS */ + struct csio_hw_stats stats; /* Hw statistics */ +}; + +/* Register access macros */ +#define csio_reg(_b, _r) ((_b) + (_r)) + +#define csio_rd_reg8(_h, _r) readb(csio_reg((_h)->regstart, (_r))) +#define csio_rd_reg16(_h, _r) readw(csio_reg((_h)->regstart, (_r))) +#define csio_rd_reg32(_h, _r) readl(csio_reg((_h)->regstart, (_r))) +#define csio_rd_reg64(_h, _r) readq(csio_reg((_h)->regstart, (_r))) + +#define csio_wr_reg8(_h, _v, _r) writeb((_v), \ + csio_reg((_h)->regstart, (_r))) +#define csio_wr_reg16(_h, _v, _r) writew((_v), \ + csio_reg((_h)->regstart, (_r))) +#define csio_wr_reg32(_h, _v, _r) writel((_v), \ + csio_reg((_h)->regstart, (_r))) +#define csio_wr_reg64(_h, _v, _r) writeq((_v), \ + csio_reg((_h)->regstart, (_r))) + +void csio_set_reg_field(struct csio_hw *, uint32_t, uint32_t, uint32_t); + +/* Core clocks <==> uSecs */ +static inline uint32_t +csio_core_ticks_to_us(struct csio_hw *hw, uint32_t ticks) +{ + /* add Core Clock / 2 to round ticks to nearest uS */ + return (ticks * 1000 + hw->vpd.cclk/2) / hw->vpd.cclk; +} + +static inline uint32_t +csio_us_to_core_ticks(struct csio_hw *hw, uint32_t us) +{ + return (us * hw->vpd.cclk) / 1000; +} + +/* Easy access macros */ +#define csio_hw_to_wrm(hw) ((struct csio_wrm *)(&(hw)->wrm)) +#define csio_hw_to_mbm(hw) ((struct csio_mbm *)(&(hw)->mbm)) +#define csio_hw_to_scsim(hw) ((struct csio_scsim *)(&(hw)->scsim)) +#define csio_hw_to_mgmtm(hw) ((struct csio_mgmtm *)(&(hw)->mgmtm)) + +#define CSIO_PCI_BUS(hw) ((hw)->pdev->bus->number) +#define CSIO_PCI_DEV(hw) (PCI_SLOT((hw)->pdev->devfn)) +#define CSIO_PCI_FUNC(hw) (PCI_FUNC((hw)->pdev->devfn)) + +#define csio_set_fwevt_intr_idx(_h, _i) ((_h)->fwevt_intr_idx = (_i)) +#define csio_get_fwevt_intr_idx(_h) ((_h)->fwevt_intr_idx) +#define csio_set_nondata_intr_idx(_h, _i) ((_h)->nondata_intr_idx = (_i)) +#define csio_get_nondata_intr_idx(_h) ((_h)->nondata_intr_idx) + +/* Printing/logging */ +#define CSIO_DEVID(__dev) ((__dev)->dev_num) +#define CSIO_DEVID_LO(__dev) (CSIO_DEVID((__dev)) & 0xFFFF) +#define CSIO_DEVID_HI(__dev) ((CSIO_DEVID((__dev)) >> 16) & 0xFFFF) + +#define csio_info(__hw, __fmt, ...) \ + dev_info(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__) + +#define csio_fatal(__hw, __fmt, ...) \ + dev_crit(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__) + +#define csio_err(__hw, __fmt, ...) \ + dev_err(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__) + +#define csio_warn(__hw, __fmt, ...) \ + dev_warn(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__) + +#ifdef __CSIO_DEBUG__ +#define csio_dbg(__hw, __fmt, ...) \ + csio_info((__hw), __fmt, ##__VA_ARGS__); +#else +#define csio_dbg(__hw, __fmt, ...) +#endif + +int csio_mgmt_req_lookup(struct csio_mgmtm *, struct csio_ioreq *); +void csio_hw_intr_disable(struct csio_hw *); +int csio_hw_slow_intr_handler(struct csio_hw *hw); +int csio_hw_start(struct csio_hw *); +int csio_hw_stop(struct csio_hw *); +int csio_hw_reset(struct csio_hw *); +int csio_is_hw_ready(struct csio_hw *); +int csio_is_hw_removing(struct csio_hw *); + +int csio_fwevtq_handler(struct csio_hw *); +void csio_evtq_worker(struct work_struct *); +int csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, + void *evt_msg, uint16_t len); +void csio_evtq_flush(struct csio_hw *hw); + +int csio_request_irqs(struct csio_hw *); +void csio_intr_enable(struct csio_hw *); +void csio_intr_disable(struct csio_hw *, bool); + +struct csio_lnode *csio_lnode_alloc(struct csio_hw *); +int csio_config_queues(struct csio_hw *); + +int csio_hw_mc_read(struct csio_hw *, uint32_t, __be32 *, uint64_t *); +int csio_hw_edc_read(struct csio_hw *, int, uint32_t, __be32 *, uint64_t *); +int csio_hw_init(struct csio_hw *); +void csio_hw_exit(struct csio_hw *); +#endif /* ifndef __CSIO_HW_H__ */ diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c new file mode 100644 index 0000000..fdd408f --- /dev/null +++ b/drivers/scsi/csiostor/csio_init.c @@ -0,0 +1,1274 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/aer.h> +#include <linux/mm.h> +#include <linux/notifier.h> +#include <linux/kdebug.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/string.h> +#include <linux/export.h> + +#include "csio_init.h" +#include "csio_defs.h" + +#define CSIO_MIN_MEMPOOL_SZ 64 + +static struct dentry *csio_debugfs_root; + +static struct scsi_transport_template *csio_fcoe_transport; +static struct scsi_transport_template *csio_fcoe_transport_vport; + +/* + * debugfs support + */ +static int +csio_mem_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t +csio_mem_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) +{ + loff_t pos = *ppos; + loff_t avail = file->f_path.dentry->d_inode->i_size; + unsigned int mem = (uintptr_t)file->private_data & 3; + struct csio_hw *hw = file->private_data - mem; + + if (pos < 0) + return -EINVAL; + if (pos >= avail) + return 0; + if (count > avail - pos) + count = avail - pos; + + while (count) { + size_t len; + int ret, ofst; + __be32 data[16]; + + if (mem == MEM_MC) + ret = csio_hw_mc_read(hw, pos, data, NULL); + else + ret = csio_hw_edc_read(hw, mem, pos, data, NULL); + if (ret) + return ret; + + ofst = pos % sizeof(data); + len = min(count, sizeof(data) - ofst); + if (copy_to_user(buf, (u8 *)data + ofst, len)) + return -EFAULT; + + buf += len; + pos += len; + count -= len; + } + count = pos - *ppos; + *ppos = pos; + return count; +} + +static const struct file_operations csio_mem_debugfs_fops = { + .owner = THIS_MODULE, + .open = csio_mem_open, + .read = csio_mem_read, + .llseek = default_llseek, +}; + +static void __devinit +csio_add_debugfs_mem(struct csio_hw *hw, const char *name, + unsigned int idx, unsigned int size_mb) +{ + struct dentry *de; + + de = debugfs_create_file(name, S_IRUSR, hw->debugfs_root, + (void *)hw + idx, &csio_mem_debugfs_fops); + if (de && de->d_inode) + de->d_inode->i_size = size_mb << 20; +} + +static int __devinit +csio_setup_debugfs(struct csio_hw *hw) +{ + int i; + + if (IS_ERR_OR_NULL(hw->debugfs_root)) + return -1; + + i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE); + if (i & EDRAM0_ENABLE) + csio_add_debugfs_mem(hw, "edc0", MEM_EDC0, 5); + if (i & EDRAM1_ENABLE) + csio_add_debugfs_mem(hw, "edc1", MEM_EDC1, 5); + if (i & EXT_MEM_ENABLE) + csio_add_debugfs_mem(hw, "mc", MEM_MC, + EXT_MEM_SIZE_GET(csio_rd_reg32(hw, MA_EXT_MEMORY_BAR))); + return 0; +} + +/* + * csio_dfs_create - Creates and sets up per-hw debugfs. + * + */ +static int +csio_dfs_create(struct csio_hw *hw) +{ + if (csio_debugfs_root) { + hw->debugfs_root = debugfs_create_dir(pci_name(hw->pdev), + csio_debugfs_root); + csio_setup_debugfs(hw); + } + + return 0; +} + +/* + * csio_dfs_destroy - Destroys per-hw debugfs. + */ +static int +csio_dfs_destroy(struct csio_hw *hw) +{ + if (hw->debugfs_root) + debugfs_remove_recursive(hw->debugfs_root); + + return 0; +} + +/* + * csio_dfs_init - Debug filesystem initialization for the module. + * + */ +static int +csio_dfs_init(void) +{ + csio_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!csio_debugfs_root) + pr_warn("Could not create debugfs entry, continuing\n"); + + return 0; +} + +/* + * csio_dfs_exit - debugfs cleanup for the module. + */ +static void +csio_dfs_exit(void) +{ + debugfs_remove(csio_debugfs_root); +} + +/* + * csio_pci_init - PCI initialization. + * @pdev: PCI device. + * @bars: Bitmask of bars to be requested. + * + * Initializes the PCI function by enabling MMIO, setting bus + * mastership and setting DMA mask. + */ +static int +csio_pci_init(struct pci_dev *pdev, int *bars) +{ + int rv = -ENODEV; + + *bars = pci_select_bars(pdev, IORESOURCE_MEM); + + if (pci_enable_device_mem(pdev)) + goto err; + + if (pci_request_selected_regions(pdev, *bars, KBUILD_MODNAME)) + goto err_disable_device; + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + } else { + dev_err(&pdev->dev, "No suitable DMA available.\n"); + goto err_release_regions; + } + + return 0; + +err_release_regions: + pci_release_selected_regions(pdev, *bars); +err_disable_device: + pci_disable_device(pdev); +err: + return rv; + +} + +/* + * csio_pci_exit - PCI unitialization. + * @pdev: PCI device. + * @bars: Bars to be released. + * + */ +static void +csio_pci_exit(struct pci_dev *pdev, int *bars) +{ + pci_release_selected_regions(pdev, *bars); + pci_disable_device(pdev); +} + +/* + * csio_hw_init_workers - Initialize the HW module's worker threads. + * @hw: HW module. + * + */ +static void +csio_hw_init_workers(struct csio_hw *hw) +{ + INIT_WORK(&hw->evtq_work, csio_evtq_worker); +} + +static void +csio_hw_exit_workers(struct csio_hw *hw) +{ + cancel_work_sync(&hw->evtq_work); + flush_scheduled_work(); +} + +static int +csio_create_queues(struct csio_hw *hw) +{ + int i, j; + struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw); + int rv; + struct csio_scsi_cpu_info *info; + + if (hw->flags & CSIO_HWF_Q_FW_ALLOCED) + return 0; + + if (hw->intr_mode != CSIO_IM_MSIX) { + rv = csio_wr_iq_create(hw, NULL, hw->intr_iq_idx, + 0, hw->pport[0].portid, false, NULL); + if (rv != 0) { + csio_err(hw, " Forward Interrupt IQ failed!: %d\n", rv); + return rv; + } + } + + /* FW event queue */ + rv = csio_wr_iq_create(hw, NULL, hw->fwevt_iq_idx, + csio_get_fwevt_intr_idx(hw), + hw->pport[0].portid, true, NULL); + if (rv != 0) { + csio_err(hw, "FW event IQ config failed!: %d\n", rv); + return rv; + } + + /* Create mgmt queue */ + rv = csio_wr_eq_create(hw, NULL, mgmtm->eq_idx, + mgmtm->iq_idx, hw->pport[0].portid, NULL); + + if (rv != 0) { + csio_err(hw, "Mgmt EQ create failed!: %d\n", rv); + goto err; + } + + /* Create SCSI queues */ + for (i = 0; i < hw->num_pports; i++) { + info = &hw->scsi_cpu_info[i]; + + for (j = 0; j < info->max_cpus; j++) { + struct csio_scsi_qset *sqset = &hw->sqset[i][j]; + + rv = csio_wr_iq_create(hw, NULL, sqset->iq_idx, + sqset->intr_idx, i, false, NULL); + if (rv != 0) { + csio_err(hw, + "SCSI module IQ config failed [%d][%d]:%d\n", + i, j, rv); + goto err; + } + rv = csio_wr_eq_create(hw, NULL, sqset->eq_idx, + sqset->iq_idx, i, NULL); + if (rv != 0) { + csio_err(hw, + "SCSI module EQ config failed [%d][%d]:%d\n", + i, j, rv); + goto err; + } + } /* for all CPUs */ + } /* For all ports */ + + hw->flags |= CSIO_HWF_Q_FW_ALLOCED; + return 0; +err: + csio_wr_destroy_queues(hw, true); + return -EINVAL; +} + +/* + * csio_config_queues - Configure the DMA queues. + * @hw: HW module. + * + * Allocates memory for queues are registers them with FW. + */ +int +csio_config_queues(struct csio_hw *hw) +{ + int i, j, idx, k = 0; + int rv; + struct csio_scsi_qset *sqset; + struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw); + struct csio_scsi_qset *orig; + struct csio_scsi_cpu_info *info; + + if (hw->flags & CSIO_HWF_Q_MEM_ALLOCED) + return csio_create_queues(hw); + + /* Calculate number of SCSI queues for MSIX we would like */ + hw->num_scsi_msix_cpus = num_online_cpus(); + hw->num_sqsets = num_online_cpus() * hw->num_pports; + + if (hw->num_sqsets > CSIO_MAX_SCSI_QSETS) { + hw->num_sqsets = CSIO_MAX_SCSI_QSETS; + hw->num_scsi_msix_cpus = CSIO_MAX_SCSI_CPU; + } + + /* Initialize max_cpus, may get reduced during msix allocations */ + for (i = 0; i < hw->num_pports; i++) + hw->scsi_cpu_info[i].max_cpus = hw->num_scsi_msix_cpus; + + csio_dbg(hw, "nsqsets:%d scpus:%d\n", + hw->num_sqsets, hw->num_scsi_msix_cpus); + + csio_intr_enable(hw); + + if (hw->intr_mode != CSIO_IM_MSIX) { + + /* Allocate Forward interrupt iq. */ + hw->intr_iq_idx = csio_wr_alloc_q(hw, CSIO_INTR_IQSIZE, + CSIO_INTR_WRSIZE, CSIO_INGRESS, + (void *)hw, 0, 0, NULL); + if (hw->intr_iq_idx == -1) { + csio_err(hw, + "Forward interrupt queue creation failed\n"); + goto intr_disable; + } + } + + /* Allocate the FW evt queue */ + hw->fwevt_iq_idx = csio_wr_alloc_q(hw, CSIO_FWEVT_IQSIZE, + CSIO_FWEVT_WRSIZE, + CSIO_INGRESS, (void *)hw, + CSIO_FWEVT_FLBUFS, 0, + csio_fwevt_intx_handler); + if (hw->fwevt_iq_idx == -1) { + csio_err(hw, "FW evt queue creation failed\n"); + goto intr_disable; + } + + /* Allocate the mgmt queue */ + mgmtm->eq_idx = csio_wr_alloc_q(hw, CSIO_MGMT_EQSIZE, + CSIO_MGMT_EQ_WRSIZE, + CSIO_EGRESS, (void *)hw, 0, 0, NULL); + if (mgmtm->eq_idx == -1) { + csio_err(hw, "Failed to alloc egress queue for mgmt module\n"); + goto intr_disable; + } + + /* Use FW IQ for MGMT req completion */ + mgmtm->iq_idx = hw->fwevt_iq_idx; + + /* Allocate SCSI queues */ + for (i = 0; i < hw->num_pports; i++) { + info = &hw->scsi_cpu_info[i]; + + for (j = 0; j < hw->num_scsi_msix_cpus; j++) { + sqset = &hw->sqset[i][j]; + + if (j >= info->max_cpus) { + k = j % info->max_cpus; + orig = &hw->sqset[i][k]; + sqset->eq_idx = orig->eq_idx; + sqset->iq_idx = orig->iq_idx; + continue; + } + + idx = csio_wr_alloc_q(hw, csio_scsi_eqsize, 0, + CSIO_EGRESS, (void *)hw, 0, 0, + NULL); + if (idx == -1) { + csio_err(hw, "EQ creation failed for idx:%d\n", + idx); + goto intr_disable; + } + + sqset->eq_idx = idx; + + idx = csio_wr_alloc_q(hw, CSIO_SCSI_IQSIZE, + CSIO_SCSI_IQ_WRSZ, CSIO_INGRESS, + (void *)hw, 0, 0, + csio_scsi_intx_handler); + if (idx == -1) { + csio_err(hw, "IQ creation failed for idx:%d\n", + idx); + goto intr_disable; + } + sqset->iq_idx = idx; + } /* for all CPUs */ + } /* For all ports */ + + hw->flags |= CSIO_HWF_Q_MEM_ALLOCED; + + rv = csio_create_queues(hw); + if (rv != 0) + goto intr_disable; + + /* + * Now request IRQs for the vectors. In the event of a failure, + * cleanup is handled internally by this function. + */ + rv = csio_request_irqs(hw); + if (rv != 0) + return -EINVAL; + + return 0; + +intr_disable: + csio_intr_disable(hw, false); + + return -EINVAL; +} + +static int +csio_resource_alloc(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + int rv = -ENOMEM; + + wrm->num_q = ((CSIO_MAX_SCSI_QSETS * 2) + CSIO_HW_NIQ + + CSIO_HW_NEQ + CSIO_HW_NFLQ + CSIO_HW_NINTXQ); + + hw->mb_mempool = mempool_create_kmalloc_pool(CSIO_MIN_MEMPOOL_SZ, + sizeof(struct csio_mb)); + if (!hw->mb_mempool) + goto err; + + hw->rnode_mempool = mempool_create_kmalloc_pool(CSIO_MIN_MEMPOOL_SZ, + sizeof(struct csio_rnode)); + if (!hw->rnode_mempool) + goto err_free_mb_mempool; + + hw->scsi_pci_pool = pci_pool_create("csio_scsi_pci_pool", hw->pdev, + CSIO_SCSI_RSP_LEN, 8, 0); + if (!hw->scsi_pci_pool) + goto err_free_rn_pool; + + return 0; + +err_free_rn_pool: + mempool_destroy(hw->rnode_mempool); + hw->rnode_mempool = NULL; +err_free_mb_mempool: + mempool_destroy(hw->mb_mempool); + hw->mb_mempool = NULL; +err: + return rv; +} + +static void +csio_resource_free(struct csio_hw *hw) +{ + pci_pool_destroy(hw->scsi_pci_pool); + hw->scsi_pci_pool = NULL; + mempool_destroy(hw->rnode_mempool); + hw->rnode_mempool = NULL; + mempool_destroy(hw->mb_mempool); + hw->mb_mempool = NULL; +} + +/* + * csio_hw_alloc - Allocate and initialize the HW module. + * @pdev: PCI device. + * + * Allocates HW structure, DMA, memory resources, maps BARS to + * host memory and initializes HW module. + */ +static struct csio_hw * __devinit +csio_hw_alloc(struct pci_dev *pdev) +{ + struct csio_hw *hw; + + hw = kzalloc(sizeof(struct csio_hw), GFP_KERNEL); + if (!hw) + goto err; + + hw->pdev = pdev; + strncpy(hw->drv_version, CSIO_DRV_VERSION, 32); + + /* memory pool/DMA pool allocation */ + if (csio_resource_alloc(hw)) + goto err_free_hw; + + /* Get the start address of registers from BAR 0 */ + hw->regstart = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->regstart) { + csio_err(hw, "Could not map BAR 0, regstart = %p\n", + hw->regstart); + goto err_resource_free; + } + + csio_hw_init_workers(hw); + + if (csio_hw_init(hw)) + goto err_unmap_bar; + + csio_dfs_create(hw); + + csio_dbg(hw, "hw:%p\n", hw); + + return hw; + +err_unmap_bar: + csio_hw_exit_workers(hw); + iounmap(hw->regstart); +err_resource_free: + csio_resource_free(hw); +err_free_hw: + kfree(hw); +err: + return NULL; +} + +/* + * csio_hw_free - Uninitialize and free the HW module. + * @hw: The HW module + * + * Disable interrupts, uninit the HW module, free resources, free hw. + */ +static void +csio_hw_free(struct csio_hw *hw) +{ + csio_intr_disable(hw, true); + csio_hw_exit_workers(hw); + csio_hw_exit(hw); + iounmap(hw->regstart); + csio_dfs_destroy(hw); + csio_resource_free(hw); + kfree(hw); +} + +/** + * csio_shost_init - Create and initialize the lnode module. + * @hw: The HW module. + * @dev: The device associated with this invocation. + * @probe: Called from probe context or not? + * @os_pln: Parent lnode if any. + * + * Allocates lnode structure via scsi_host_alloc, initializes + * shost, initializes lnode module and registers with SCSI ML + * via scsi_host_add. This function is shared between physical and + * virtual node ports. + */ +struct csio_lnode * +csio_shost_init(struct csio_hw *hw, struct device *dev, + bool probe, struct csio_lnode *pln) +{ + struct Scsi_Host *shost = NULL; + struct csio_lnode *ln; + + csio_fcoe_shost_template.cmd_per_lun = csio_lun_qdepth; + csio_fcoe_shost_vport_template.cmd_per_lun = csio_lun_qdepth; + + /* + * hw->pdev is the physical port's PCI dev structure, + * which will be different from the NPIV dev structure. + */ + if (dev == &hw->pdev->dev) + shost = scsi_host_alloc( + &csio_fcoe_shost_template, + sizeof(struct csio_lnode)); + else + shost = scsi_host_alloc( + &csio_fcoe_shost_vport_template, + sizeof(struct csio_lnode)); + + if (!shost) + goto err; + + ln = shost_priv(shost); + memset(ln, 0, sizeof(struct csio_lnode)); + + /* Link common lnode to this lnode */ + ln->dev_num = (shost->host_no << 16); + + shost->can_queue = CSIO_MAX_QUEUE; + shost->this_id = -1; + shost->unique_id = shost->host_no; + shost->max_cmd_len = 16; /* Max CDB length supported */ + shost->max_id = min_t(uint32_t, csio_fcoe_rnodes, + hw->fres_info.max_ssns); + shost->max_lun = CSIO_MAX_LUN; + if (dev == &hw->pdev->dev) + shost->transportt = csio_fcoe_transport; + else + shost->transportt = csio_fcoe_transport_vport; + + /* root lnode */ + if (!hw->rln) + hw->rln = ln; + + /* Other initialization here: Common, Transport specific */ + if (csio_lnode_init(ln, hw, pln)) + goto err_shost_put; + + if (scsi_add_host(shost, dev)) + goto err_lnode_exit; + + return ln; + +err_lnode_exit: + csio_lnode_exit(ln); +err_shost_put: + scsi_host_put(shost); +err: + return NULL; +} + +/** + * csio_shost_exit - De-instantiate the shost. + * @ln: The lnode module corresponding to the shost. + * + */ +void +csio_shost_exit(struct csio_lnode *ln) +{ + struct Scsi_Host *shost = csio_ln_to_shost(ln); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + /* Inform transport */ + fc_remove_host(shost); + + /* Inform SCSI ML */ + scsi_remove_host(shost); + + /* Flush all the events, so that any rnode removal events + * already queued are all handled, before we remove the lnode. + */ + spin_lock_irq(&hw->lock); + csio_evtq_flush(hw); + spin_unlock_irq(&hw->lock); + + csio_lnode_exit(ln); + scsi_host_put(shost); +} + +struct csio_lnode * +csio_lnode_alloc(struct csio_hw *hw) +{ + return csio_shost_init(hw, &hw->pdev->dev, false, NULL); +} + +void +csio_lnodes_block_request(struct csio_hw *hw) +{ + struct Scsi_Host *shost; + struct csio_lnode *sln; + struct csio_lnode *ln; + struct list_head *cur_ln, *cur_cln; + struct csio_lnode **lnode_list; + int cur_cnt = 0, ii; + + lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns), + GFP_KERNEL); + if (!lnode_list) { + csio_err(hw, "Failed to allocate lnodes_list"); + return; + } + + spin_lock_irq(&hw->lock); + /* Traverse sibling lnodes */ + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + lnode_list[cur_cnt++] = sln; + + /* Traverse children lnodes */ + list_for_each(cur_cln, &sln->cln_head) + lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln; + } + spin_unlock_irq(&hw->lock); + + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "Blocking IOs on lnode: %p\n", lnode_list[ii]); + ln = lnode_list[ii]; + shost = csio_ln_to_shost(ln); + scsi_block_requests(shost); + + } + kfree(lnode_list); +} + +void +csio_lnodes_unblock_request(struct csio_hw *hw) +{ + struct csio_lnode *ln; + struct Scsi_Host *shost; + struct csio_lnode *sln; + struct list_head *cur_ln, *cur_cln; + struct csio_lnode **lnode_list; + int cur_cnt = 0, ii; + + lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns), + GFP_KERNEL); + if (!lnode_list) { + csio_err(hw, "Failed to allocate lnodes_list"); + return; + } + + spin_lock_irq(&hw->lock); + /* Traverse sibling lnodes */ + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + lnode_list[cur_cnt++] = sln; + + /* Traverse children lnodes */ + list_for_each(cur_cln, &sln->cln_head) + lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln; + } + spin_unlock_irq(&hw->lock); + + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "unblocking IOs on lnode: %p\n", lnode_list[ii]); + ln = lnode_list[ii]; + shost = csio_ln_to_shost(ln); + scsi_unblock_requests(shost); + } + kfree(lnode_list); +} + +void +csio_lnodes_block_by_port(struct csio_hw *hw, uint8_t portid) +{ + struct csio_lnode *ln; + struct Scsi_Host *shost; + struct csio_lnode *sln; + struct list_head *cur_ln, *cur_cln; + struct csio_lnode **lnode_list; + int cur_cnt = 0, ii; + + lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns), + GFP_KERNEL); + if (!lnode_list) { + csio_err(hw, "Failed to allocate lnodes_list"); + return; + } + + spin_lock_irq(&hw->lock); + /* Traverse sibling lnodes */ + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + if (sln->portid != portid) + continue; + + lnode_list[cur_cnt++] = sln; + + /* Traverse children lnodes */ + list_for_each(cur_cln, &sln->cln_head) + lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln; + } + spin_unlock_irq(&hw->lock); + + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "Blocking IOs on lnode: %p\n", lnode_list[ii]); + ln = lnode_list[ii]; + shost = csio_ln_to_shost(ln); + scsi_block_requests(shost); + } + kfree(lnode_list); +} + +void +csio_lnodes_unblock_by_port(struct csio_hw *hw, uint8_t portid) +{ + struct csio_lnode *ln; + struct Scsi_Host *shost; + struct csio_lnode *sln; + struct list_head *cur_ln, *cur_cln; + struct csio_lnode **lnode_list; + int cur_cnt = 0, ii; + + lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns), + GFP_KERNEL); + if (!lnode_list) { + csio_err(hw, "Failed to allocate lnodes_list"); + return; + } + + spin_lock_irq(&hw->lock); + /* Traverse sibling lnodes */ + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + if (sln->portid != portid) + continue; + lnode_list[cur_cnt++] = sln; + + /* Traverse children lnodes */ + list_for_each(cur_cln, &sln->cln_head) + lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln; + } + spin_unlock_irq(&hw->lock); + + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "unblocking IOs on lnode: %p\n", lnode_list[ii]); + ln = lnode_list[ii]; + shost = csio_ln_to_shost(ln); + scsi_unblock_requests(shost); + } + kfree(lnode_list); +} + +void +csio_lnodes_exit(struct csio_hw *hw, bool npiv) +{ + struct csio_lnode *sln; + struct csio_lnode *ln; + struct list_head *cur_ln, *cur_cln; + struct csio_lnode **lnode_list; + int cur_cnt = 0, ii; + + lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns), + GFP_KERNEL); + if (!lnode_list) { + csio_err(hw, "lnodes_exit: Failed to allocate lnodes_list.\n"); + return; + } + + /* Get all child lnodes(NPIV ports) */ + spin_lock_irq(&hw->lock); + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + + /* Traverse children lnodes */ + list_for_each(cur_cln, &sln->cln_head) + lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln; + } + spin_unlock_irq(&hw->lock); + + /* Delete NPIV lnodes */ + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "Deleting child lnode: %p\n", lnode_list[ii]); + ln = lnode_list[ii]; + fc_vport_terminate(ln->fc_vport); + } + + /* Delete only npiv lnodes */ + if (npiv) + goto free_lnodes; + + cur_cnt = 0; + /* Get all physical lnodes */ + spin_lock_irq(&hw->lock); + /* Traverse sibling lnodes */ + list_for_each(cur_ln, &hw->sln_head) { + sln = (struct csio_lnode *) cur_ln; + lnode_list[cur_cnt++] = sln; + } + spin_unlock_irq(&hw->lock); + + /* Delete physical lnodes */ + for (ii = 0; ii < cur_cnt; ii++) { + csio_dbg(hw, "Deleting parent lnode: %p\n", lnode_list[ii]); + csio_shost_exit(lnode_list[ii]); + } + +free_lnodes: + kfree(lnode_list); +} + +/* + * csio_lnode_init_post: Set lnode attributes after starting HW. + * @ln: lnode. + * + */ +static void +csio_lnode_init_post(struct csio_lnode *ln) +{ + struct Scsi_Host *shost = csio_ln_to_shost(ln); + + csio_fchost_attr_init(ln); + + scsi_scan_host(shost); +} + +/* + * csio_probe_one - Instantiate this function. + * @pdev: PCI device + * @id: Device ID + * + * This is the .probe() callback of the driver. This function: + * - Initializes the PCI function by enabling MMIO, setting bus + * mastership and setting DMA mask. + * - Allocates HW structure, DMA, memory resources, maps BARS to + * host memory and initializes HW module. + * - Allocates lnode structure via scsi_host_alloc, initializes + * shost, initialized lnode module and registers with SCSI ML + * via scsi_host_add. + * - Enables interrupts, and starts the chip by kicking off the + * HW state machine. + * - Once hardware is ready, initiated scan of the host via + * scsi_scan_host. + */ +static int __devinit +csio_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rv; + int bars; + int i; + struct csio_hw *hw; + struct csio_lnode *ln; + + rv = csio_pci_init(pdev, &bars); + if (rv) + goto err; + + hw = csio_hw_alloc(pdev); + if (!hw) { + rv = -ENODEV; + goto err_pci_exit; + } + + pci_set_drvdata(pdev, hw); + + if (csio_hw_start(hw) != 0) { + dev_err(&pdev->dev, + "Failed to start FW, continuing in debug mode.\n"); + return 0; + } + + sprintf(hw->fwrev_str, "%u.%u.%u.%u\n", + FW_HDR_FW_VER_MAJOR_GET(hw->fwrev), + FW_HDR_FW_VER_MINOR_GET(hw->fwrev), + FW_HDR_FW_VER_MICRO_GET(hw->fwrev), + FW_HDR_FW_VER_BUILD_GET(hw->fwrev)); + + for (i = 0; i < hw->num_pports; i++) { + ln = csio_shost_init(hw, &pdev->dev, true, NULL); + if (!ln) { + rv = -ENODEV; + break; + } + /* Initialize portid */ + ln->portid = hw->pport[i].portid; + + spin_lock_irq(&hw->lock); + if (csio_lnode_start(ln) != 0) + rv = -ENODEV; + spin_unlock_irq(&hw->lock); + + if (rv) + break; + + csio_lnode_init_post(ln); + } + + if (rv) + goto err_lnode_exit; + + return 0; + +err_lnode_exit: + csio_lnodes_block_request(hw); + spin_lock_irq(&hw->lock); + csio_hw_stop(hw); + spin_unlock_irq(&hw->lock); + csio_lnodes_unblock_request(hw); + pci_set_drvdata(hw->pdev, NULL); + csio_lnodes_exit(hw, 0); + csio_hw_free(hw); +err_pci_exit: + csio_pci_exit(pdev, &bars); +err: + dev_err(&pdev->dev, "probe of device failed: %d\n", rv); + return rv; +} + +/* + * csio_remove_one - Remove one instance of the driver at this PCI function. + * @pdev: PCI device + * + * Used during hotplug operation. + */ +static void __devexit +csio_remove_one(struct pci_dev *pdev) +{ + struct csio_hw *hw = pci_get_drvdata(pdev); + int bars = pci_select_bars(pdev, IORESOURCE_MEM); + + csio_lnodes_block_request(hw); + spin_lock_irq(&hw->lock); + + /* Stops lnode, Rnode s/m + * Quiesce IOs. + * All sessions with remote ports are unregistered. + */ + csio_hw_stop(hw); + spin_unlock_irq(&hw->lock); + csio_lnodes_unblock_request(hw); + + csio_lnodes_exit(hw, 0); + csio_hw_free(hw); + pci_set_drvdata(pdev, NULL); + csio_pci_exit(pdev, &bars); +} + +/* + * csio_pci_error_detected - PCI error was detected + * @pdev: PCI device + * + */ +static pci_ers_result_t +csio_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct csio_hw *hw = pci_get_drvdata(pdev); + + csio_lnodes_block_request(hw); + spin_lock_irq(&hw->lock); + + /* Post PCI error detected evt to HW s/m + * HW s/m handles this evt by quiescing IOs, unregisters rports + * and finally takes the device to offline. + */ + csio_post_event(&hw->sm, CSIO_HWE_PCIERR_DETECTED); + spin_unlock_irq(&hw->lock); + csio_lnodes_unblock_request(hw); + csio_lnodes_exit(hw, 0); + csio_intr_disable(hw, true); + pci_disable_device(pdev); + return state == pci_channel_io_perm_failure ? + PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET; +} + +/* + * csio_pci_slot_reset - PCI slot has been reset. + * @pdev: PCI device + * + */ +static pci_ers_result_t +csio_pci_slot_reset(struct pci_dev *pdev) +{ + struct csio_hw *hw = pci_get_drvdata(pdev); + int ready; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "cannot re-enable device in slot reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + pci_cleanup_aer_uncorrect_error_status(pdev); + + /* Bring HW s/m to ready state. + * but don't resume IOs. + */ + spin_lock_irq(&hw->lock); + csio_post_event(&hw->sm, CSIO_HWE_PCIERR_SLOT_RESET); + ready = csio_is_hw_ready(hw); + spin_unlock_irq(&hw->lock); + + if (ready) { + return PCI_ERS_RESULT_RECOVERED; + } else { + dev_err(&pdev->dev, "Can't initialize HW when in slot reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } +} + +/* + * csio_pci_resume - Resume normal operations + * @pdev: PCI device + * + */ +static void +csio_pci_resume(struct pci_dev *pdev) +{ + struct csio_hw *hw = pci_get_drvdata(pdev); + struct csio_lnode *ln; + int rv = 0; + int i; + + /* Bring the LINK UP and Resume IO */ + + for (i = 0; i < hw->num_pports; i++) { + ln = csio_shost_init(hw, &pdev->dev, true, NULL); + if (!ln) { + rv = -ENODEV; + break; + } + /* Initialize portid */ + ln->portid = hw->pport[i].portid; + + spin_lock_irq(&hw->lock); + if (csio_lnode_start(ln) != 0) + rv = -ENODEV; + spin_unlock_irq(&hw->lock); + + if (rv) + break; + + csio_lnode_init_post(ln); + } + + if (rv) + goto err_resume_exit; + + return; + +err_resume_exit: + csio_lnodes_block_request(hw); + spin_lock_irq(&hw->lock); + csio_hw_stop(hw); + spin_unlock_irq(&hw->lock); + csio_lnodes_unblock_request(hw); + csio_lnodes_exit(hw, 0); + csio_hw_free(hw); + dev_err(&pdev->dev, "resume of device failed: %d\n", rv); +} + +static struct pci_error_handlers csio_err_handler = { + .error_detected = csio_pci_error_detected, + .slot_reset = csio_pci_slot_reset, + .resume = csio_pci_resume, +}; + +static DEFINE_PCI_DEVICE_TABLE(csio_pci_tbl) = { + CSIO_DEVICE(CSIO_DEVID_T440DBG_FCOE, 0), /* T440DBG FCOE */ + CSIO_DEVICE(CSIO_DEVID_T420CR_FCOE, 0), /* T420CR FCOE */ + CSIO_DEVICE(CSIO_DEVID_T422CR_FCOE, 0), /* T422CR FCOE */ + CSIO_DEVICE(CSIO_DEVID_T440CR_FCOE, 0), /* T440CR FCOE */ + CSIO_DEVICE(CSIO_DEVID_T420BCH_FCOE, 0), /* T420BCH FCOE */ + CSIO_DEVICE(CSIO_DEVID_T440BCH_FCOE, 0), /* T440BCH FCOE */ + CSIO_DEVICE(CSIO_DEVID_T440CH_FCOE, 0), /* T440CH FCOE */ + CSIO_DEVICE(CSIO_DEVID_T420SO_FCOE, 0), /* T420SO FCOE */ + CSIO_DEVICE(CSIO_DEVID_T420CX_FCOE, 0), /* T420CX FCOE */ + CSIO_DEVICE(CSIO_DEVID_T420BT_FCOE, 0), /* T420BT FCOE */ + CSIO_DEVICE(CSIO_DEVID_T404BT_FCOE, 0), /* T404BT FCOE */ + CSIO_DEVICE(CSIO_DEVID_B420_FCOE, 0), /* B420 FCOE */ + CSIO_DEVICE(CSIO_DEVID_B404_FCOE, 0), /* B404 FCOE */ + CSIO_DEVICE(CSIO_DEVID_T480CR_FCOE, 0), /* T480 CR FCOE */ + CSIO_DEVICE(CSIO_DEVID_T440LPCR_FCOE, 0), /* T440 LP-CR FCOE */ + CSIO_DEVICE(CSIO_DEVID_PE10K, 0), /* PE10K FCOE */ + CSIO_DEVICE(CSIO_DEVID_PE10K_PF1, 0), /* PE10K FCOE on PF1 */ + { 0, 0, 0, 0, 0, 0, 0 } +}; + + +static struct pci_driver csio_pci_driver = { + .name = KBUILD_MODNAME, + .driver = { + .owner = THIS_MODULE, + }, + .id_table = csio_pci_tbl, + .probe = csio_probe_one, + .remove = csio_remove_one, + .err_handler = &csio_err_handler, +}; + +/* + * csio_init - Chelsio storage driver initialization function. + * + */ +static int __init +csio_init(void) +{ + int rv = -ENOMEM; + + pr_info("%s %s\n", CSIO_DRV_DESC, CSIO_DRV_VERSION); + + csio_dfs_init(); + + csio_fcoe_transport = fc_attach_transport(&csio_fc_transport_funcs); + if (!csio_fcoe_transport) + goto err; + + csio_fcoe_transport_vport = + fc_attach_transport(&csio_fc_transport_vport_funcs); + if (!csio_fcoe_transport_vport) + goto err_vport; + + rv = pci_register_driver(&csio_pci_driver); + if (rv) + goto err_pci; + + return 0; + +err_pci: + fc_release_transport(csio_fcoe_transport_vport); +err_vport: + fc_release_transport(csio_fcoe_transport); +err: + csio_dfs_exit(); + return rv; +} + +/* + * csio_exit - Chelsio storage driver uninitialization . + * + * Function that gets called in the unload path. + */ +static void __exit +csio_exit(void) +{ + pci_unregister_driver(&csio_pci_driver); + csio_dfs_exit(); + fc_release_transport(csio_fcoe_transport_vport); + fc_release_transport(csio_fcoe_transport); +} + +module_init(csio_init); +module_exit(csio_exit); +MODULE_AUTHOR(CSIO_DRV_AUTHOR); +MODULE_DESCRIPTION(CSIO_DRV_DESC); +MODULE_LICENSE(CSIO_DRV_LICENSE); +MODULE_DEVICE_TABLE(pci, csio_pci_tbl); +MODULE_VERSION(CSIO_DRV_VERSION); +MODULE_FIRMWARE(CSIO_FW_FNAME); diff --git a/drivers/scsi/csiostor/csio_init.h b/drivers/scsi/csiostor/csio_init.h new file mode 100644 index 0000000..0838fd7 --- /dev/null +++ b/drivers/scsi/csiostor/csio_init.h @@ -0,0 +1,158 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_INIT_H__ +#define __CSIO_INIT_H__ + +#include <linux/pci.h> +#include <linux/if_ether.h> +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_fc.h> + +#include "csio_scsi.h" +#include "csio_lnode.h" +#include "csio_rnode.h" +#include "csio_hw.h" + +#define CSIO_DRV_AUTHOR "Chelsio Communications" +#define CSIO_DRV_LICENSE "Dual BSD/GPL" +#define CSIO_DRV_DESC "Chelsio FCoE driver" +#define CSIO_DRV_VERSION "1.0.0" + +#define CSIO_DEVICE(devid, idx) \ +{ PCI_VENDOR_ID_CHELSIO, (devid), PCI_ANY_ID, PCI_ANY_ID, 0, 0, (idx) } + +#define CSIO_IS_T4_FPGA(_dev) (((_dev) == CSIO_DEVID_PE10K) ||\ + ((_dev) == CSIO_DEVID_PE10K_PF1)) + +/* FCoE device IDs */ +#define CSIO_DEVID_PE10K 0xA000 +#define CSIO_DEVID_PE10K_PF1 0xA001 +#define CSIO_DEVID_T440DBG_FCOE 0x4600 +#define CSIO_DEVID_T420CR_FCOE 0x4601 +#define CSIO_DEVID_T422CR_FCOE 0x4602 +#define CSIO_DEVID_T440CR_FCOE 0x4603 +#define CSIO_DEVID_T420BCH_FCOE 0x4604 +#define CSIO_DEVID_T440BCH_FCOE 0x4605 +#define CSIO_DEVID_T440CH_FCOE 0x4606 +#define CSIO_DEVID_T420SO_FCOE 0x4607 +#define CSIO_DEVID_T420CX_FCOE 0x4608 +#define CSIO_DEVID_T420BT_FCOE 0x4609 +#define CSIO_DEVID_T404BT_FCOE 0x460A +#define CSIO_DEVID_B420_FCOE 0x460B +#define CSIO_DEVID_B404_FCOE 0x460C +#define CSIO_DEVID_T480CR_FCOE 0x460D +#define CSIO_DEVID_T440LPCR_FCOE 0x460E + +extern struct fc_function_template csio_fc_transport_funcs; +extern struct fc_function_template csio_fc_transport_vport_funcs; + +void csio_fchost_attr_init(struct csio_lnode *); + +/* INTx handlers */ +void csio_scsi_intx_handler(struct csio_hw *, void *, uint32_t, + struct csio_fl_dma_buf *, void *); + +void csio_fwevt_intx_handler(struct csio_hw *, void *, uint32_t, + struct csio_fl_dma_buf *, void *); + +/* Common os lnode APIs */ +void csio_lnodes_block_request(struct csio_hw *); +void csio_lnodes_unblock_request(struct csio_hw *); +void csio_lnodes_block_by_port(struct csio_hw *, uint8_t); +void csio_lnodes_unblock_by_port(struct csio_hw *, uint8_t); + +struct csio_lnode *csio_shost_init(struct csio_hw *, struct device *, bool, + struct csio_lnode *); +void csio_shost_exit(struct csio_lnode *); +void csio_lnodes_exit(struct csio_hw *, bool); + +static inline struct Scsi_Host * +csio_ln_to_shost(struct csio_lnode *ln) +{ + return container_of((void *)ln, struct Scsi_Host, hostdata[0]); +} + +/* SCSI -- locking version of get/put ioreqs */ +static inline struct csio_ioreq * +csio_get_scsi_ioreq_lock(struct csio_hw *hw, struct csio_scsim *scsim) +{ + struct csio_ioreq *ioreq; + unsigned long flags; + + spin_lock_irqsave(&scsim->freelist_lock, flags); + ioreq = csio_get_scsi_ioreq(scsim); + spin_unlock_irqrestore(&scsim->freelist_lock, flags); + + return ioreq; +} + +static inline void +csio_put_scsi_ioreq_lock(struct csio_hw *hw, struct csio_scsim *scsim, + struct csio_ioreq *ioreq) +{ + unsigned long flags; + + spin_lock_irqsave(&scsim->freelist_lock, flags); + csio_put_scsi_ioreq(scsim, ioreq); + spin_unlock_irqrestore(&scsim->freelist_lock, flags); +} + +/* Called in interrupt context */ +static inline void +csio_put_scsi_ioreq_list_lock(struct csio_hw *hw, struct csio_scsim *scsim, + struct list_head *reqlist, int n) +{ + unsigned long flags; + + spin_lock_irqsave(&scsim->freelist_lock, flags); + csio_put_scsi_ioreq_list(scsim, reqlist, n); + spin_unlock_irqrestore(&scsim->freelist_lock, flags); +} + +/* Called in interrupt context */ +static inline void +csio_put_scsi_ddp_list_lock(struct csio_hw *hw, struct csio_scsim *scsim, + struct list_head *reqlist, int n) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + csio_put_scsi_ddp_list(scsim, reqlist, n); + spin_unlock_irqrestore(&hw->lock, flags); +} + +#endif /* ifndef __CSIO_INIT_H__ */ diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c new file mode 100644 index 0000000..7ee9777 --- /dev/null +++ b/drivers/scsi/csiostor/csio_isr.c @@ -0,0 +1,624 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/cpumask.h> +#include <linux/string.h> + +#include "csio_init.h" +#include "csio_hw.h" + +static irqreturn_t +csio_nondata_isr(int irq, void *dev_id) +{ + struct csio_hw *hw = (struct csio_hw *) dev_id; + int rv; + unsigned long flags; + + if (unlikely(!hw)) + return IRQ_NONE; + + if (unlikely(pci_channel_offline(hw->pdev))) { + CSIO_INC_STATS(hw, n_pcich_offline); + return IRQ_NONE; + } + + spin_lock_irqsave(&hw->lock, flags); + csio_hw_slow_intr_handler(hw); + rv = csio_mb_isr_handler(hw); + + if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) { + hw->flags |= CSIO_HWF_FWEVT_PENDING; + spin_unlock_irqrestore(&hw->lock, flags); + schedule_work(&hw->evtq_work); + return IRQ_HANDLED; + } + spin_unlock_irqrestore(&hw->lock, flags); + return IRQ_HANDLED; +} + +/* + * csio_fwevt_handler - Common FW event handler routine. + * @hw: HW module. + * + * This is the ISR for FW events. It is shared b/w MSIX + * and INTx handlers. + */ +static void +csio_fwevt_handler(struct csio_hw *hw) +{ + int rv; + unsigned long flags; + + rv = csio_fwevtq_handler(hw); + + spin_lock_irqsave(&hw->lock, flags); + if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) { + hw->flags |= CSIO_HWF_FWEVT_PENDING; + spin_unlock_irqrestore(&hw->lock, flags); + schedule_work(&hw->evtq_work); + return; + } + spin_unlock_irqrestore(&hw->lock, flags); + +} /* csio_fwevt_handler */ + +/* + * csio_fwevt_isr() - FW events MSIX ISR + * @irq: + * @dev_id: + * + * Process WRs on the FW event queue. + * + */ +static irqreturn_t +csio_fwevt_isr(int irq, void *dev_id) +{ + struct csio_hw *hw = (struct csio_hw *) dev_id; + + if (unlikely(!hw)) + return IRQ_NONE; + + if (unlikely(pci_channel_offline(hw->pdev))) { + CSIO_INC_STATS(hw, n_pcich_offline); + return IRQ_NONE; + } + + csio_fwevt_handler(hw); + + return IRQ_HANDLED; +} + +/* + * csio_fwevt_isr() - INTx wrapper for handling FW events. + * @irq: + * @dev_id: + */ +void +csio_fwevt_intx_handler(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv) +{ + csio_fwevt_handler(hw); +} /* csio_fwevt_intx_handler */ + +/* + * csio_process_scsi_cmpl - Process a SCSI WR completion. + * @hw: HW module. + * @wr: The completed WR from the ingress queue. + * @len: Length of the WR. + * @flb: Freelist buffer array. + * + */ +static void +csio_process_scsi_cmpl(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *cbfn_q) +{ + struct csio_ioreq *ioreq; + uint8_t *scsiwr; + uint8_t subop; + void *cmnd; + unsigned long flags; + + ioreq = csio_scsi_cmpl_handler(hw, wr, len, flb, NULL, &scsiwr); + if (likely(ioreq)) { + if (unlikely(*scsiwr == FW_SCSI_ABRT_CLS_WR)) { + subop = FW_SCSI_ABRT_CLS_WR_SUB_OPCODE_GET( + ((struct fw_scsi_abrt_cls_wr *) + scsiwr)->sub_opcode_to_chk_all_io); + + csio_dbg(hw, "%s cmpl recvd ioreq:%p status:%d\n", + subop ? "Close" : "Abort", + ioreq, ioreq->wr_status); + + spin_lock_irqsave(&hw->lock, flags); + if (subop) + csio_scsi_closed(ioreq, + (struct list_head *)cbfn_q); + else + csio_scsi_aborted(ioreq, + (struct list_head *)cbfn_q); + /* + * We call scsi_done for I/Os that driver thinks aborts + * have timed out. If there is a race caused by FW + * completing abort at the exact same time that the + * driver has deteced the abort timeout, the following + * check prevents calling of scsi_done twice for the + * same command: once from the eh_abort_handler, another + * from csio_scsi_isr_handler(). This also avoids the + * need to check if csio_scsi_cmnd(req) is NULL in the + * fast path. + */ + cmnd = csio_scsi_cmnd(ioreq); + if (unlikely(cmnd == NULL)) + list_del_init(&ioreq->sm.sm_list); + + spin_unlock_irqrestore(&hw->lock, flags); + + if (unlikely(cmnd == NULL)) + csio_put_scsi_ioreq_lock(hw, + csio_hw_to_scsim(hw), ioreq); + } else { + spin_lock_irqsave(&hw->lock, flags); + csio_scsi_completed(ioreq, (struct list_head *)cbfn_q); + spin_unlock_irqrestore(&hw->lock, flags); + } + } +} + +/* + * csio_scsi_isr_handler() - Common SCSI ISR handler. + * @iq: Ingress queue pointer. + * + * Processes SCSI completions on the SCSI IQ indicated by scm->iq_idx + * by calling csio_wr_process_iq_idx. If there are completions on the + * isr_cbfn_q, yank them out into a local queue and call their io_cbfns. + * Once done, add these completions onto the freelist. + * This routine is shared b/w MSIX and INTx. + */ +static inline irqreturn_t +csio_scsi_isr_handler(struct csio_q *iq) +{ + struct csio_hw *hw = (struct csio_hw *)iq->owner; + LIST_HEAD(cbfn_q); + struct list_head *tmp; + struct csio_scsim *scm; + struct csio_ioreq *ioreq; + int isr_completions = 0; + + scm = csio_hw_to_scsim(hw); + + if (unlikely(csio_wr_process_iq(hw, iq, csio_process_scsi_cmpl, + &cbfn_q) != 0)) + return IRQ_NONE; + + /* Call back the completion routines */ + list_for_each(tmp, &cbfn_q) { + ioreq = (struct csio_ioreq *)tmp; + isr_completions++; + ioreq->io_cbfn(hw, ioreq); + /* Release ddp buffer if used for this req */ + if (unlikely(ioreq->dcopy)) + csio_put_scsi_ddp_list_lock(hw, scm, &ioreq->gen_list, + ioreq->nsge); + } + + if (isr_completions) { + /* Return the ioreqs back to ioreq->freelist */ + csio_put_scsi_ioreq_list_lock(hw, scm, &cbfn_q, + isr_completions); + } + + return IRQ_HANDLED; +} + +/* + * csio_scsi_isr() - SCSI MSIX handler + * @irq: + * @dev_id: + * + * This is the top level SCSI MSIX handler. Calls csio_scsi_isr_handler() + * for handling SCSI completions. + */ +static irqreturn_t +csio_scsi_isr(int irq, void *dev_id) +{ + struct csio_q *iq = (struct csio_q *) dev_id; + struct csio_hw *hw; + + if (unlikely(!iq)) + return IRQ_NONE; + + hw = (struct csio_hw *)iq->owner; + + if (unlikely(pci_channel_offline(hw->pdev))) { + CSIO_INC_STATS(hw, n_pcich_offline); + return IRQ_NONE; + } + + csio_scsi_isr_handler(iq); + + return IRQ_HANDLED; +} + +/* + * csio_scsi_intx_handler() - SCSI INTx handler + * @irq: + * @dev_id: + * + * This is the top level SCSI INTx handler. Calls csio_scsi_isr_handler() + * for handling SCSI completions. + */ +void +csio_scsi_intx_handler(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv) +{ + struct csio_q *iq = priv; + + csio_scsi_isr_handler(iq); + +} /* csio_scsi_intx_handler */ + +/* + * csio_fcoe_isr() - INTx/MSI interrupt service routine for FCoE. + * @irq: + * @dev_id: + * + * + */ +static irqreturn_t +csio_fcoe_isr(int irq, void *dev_id) +{ + struct csio_hw *hw = (struct csio_hw *) dev_id; + struct csio_q *intx_q = NULL; + int rv; + irqreturn_t ret = IRQ_NONE; + unsigned long flags; + + if (unlikely(!hw)) + return IRQ_NONE; + + if (unlikely(pci_channel_offline(hw->pdev))) { + CSIO_INC_STATS(hw, n_pcich_offline); + return IRQ_NONE; + } + + /* Disable the interrupt for this PCI function. */ + if (hw->intr_mode == CSIO_IM_INTX) + csio_wr_reg32(hw, 0, MYPF_REG(PCIE_PF_CLI)); + + /* + * The read in the following function will flush the + * above write. + */ + if (csio_hw_slow_intr_handler(hw)) + ret = IRQ_HANDLED; + + /* Get the INTx Forward interrupt IQ. */ + intx_q = csio_get_q(hw, hw->intr_iq_idx); + + CSIO_DB_ASSERT(intx_q); + + /* IQ handler is not possible for intx_q, hence pass in NULL */ + if (likely(csio_wr_process_iq(hw, intx_q, NULL, NULL) == 0)) + ret = IRQ_HANDLED; + + spin_lock_irqsave(&hw->lock, flags); + rv = csio_mb_isr_handler(hw); + if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) { + hw->flags |= CSIO_HWF_FWEVT_PENDING; + spin_unlock_irqrestore(&hw->lock, flags); + schedule_work(&hw->evtq_work); + return IRQ_HANDLED; + } + spin_unlock_irqrestore(&hw->lock, flags); + + return ret; +} + +static void +csio_add_msix_desc(struct csio_hw *hw) +{ + int i; + struct csio_msix_entries *entryp = &hw->msix_entries[0]; + int k = CSIO_EXTRA_VECS; + int len = sizeof(entryp->desc) - 1; + int cnt = hw->num_sqsets + k; + + /* Non-data vector */ + memset(entryp->desc, 0, len + 1); + snprintf(entryp->desc, len, "csio-%02x:%02x:%x-nondata", + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw), CSIO_PCI_FUNC(hw)); + + entryp++; + memset(entryp->desc, 0, len + 1); + snprintf(entryp->desc, len, "csio-%02x:%02x:%x-fwevt", + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw), CSIO_PCI_FUNC(hw)); + entryp++; + + /* Name SCSI vecs */ + for (i = k; i < cnt; i++, entryp++) { + memset(entryp->desc, 0, len + 1); + snprintf(entryp->desc, len, "csio-%02x:%02x:%x-scsi%d", + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw), + CSIO_PCI_FUNC(hw), i - CSIO_EXTRA_VECS); + } +} + +int +csio_request_irqs(struct csio_hw *hw) +{ + int rv, i, j, k = 0; + struct csio_msix_entries *entryp = &hw->msix_entries[0]; + struct csio_scsi_cpu_info *info; + + if (hw->intr_mode != CSIO_IM_MSIX) { + rv = request_irq(hw->pdev->irq, csio_fcoe_isr, + (hw->intr_mode == CSIO_IM_MSI) ? + 0 : IRQF_SHARED, + KBUILD_MODNAME, hw); + if (rv) { + if (hw->intr_mode == CSIO_IM_MSI) + pci_disable_msi(hw->pdev); + csio_err(hw, "Failed to allocate interrupt line.\n"); + return -EINVAL; + } + + goto out; + } + + /* Add the MSIX vector descriptions */ + csio_add_msix_desc(hw); + + rv = request_irq(entryp[k].vector, csio_nondata_isr, 0, + entryp[k].desc, hw); + if (rv) { + csio_err(hw, "IRQ request failed for vec %d err:%d\n", + entryp[k].vector, rv); + goto err; + } + + entryp[k++].dev_id = (void *)hw; + + rv = request_irq(entryp[k].vector, csio_fwevt_isr, 0, + entryp[k].desc, hw); + if (rv) { + csio_err(hw, "IRQ request failed for vec %d err:%d\n", + entryp[k].vector, rv); + goto err; + } + + entryp[k++].dev_id = (void *)hw; + + /* Allocate IRQs for SCSI */ + for (i = 0; i < hw->num_pports; i++) { + info = &hw->scsi_cpu_info[i]; + for (j = 0; j < info->max_cpus; j++, k++) { + struct csio_scsi_qset *sqset = &hw->sqset[i][j]; + struct csio_q *q = hw->wrm.q_arr[sqset->iq_idx]; + + rv = request_irq(entryp[k].vector, csio_scsi_isr, 0, + entryp[k].desc, q); + if (rv) { + csio_err(hw, + "IRQ request failed for vec %d err:%d\n", + entryp[k].vector, rv); + goto err; + } + + entryp[k].dev_id = (void *)q; + + } /* for all scsi cpus */ + } /* for all ports */ + +out: + hw->flags |= CSIO_HWF_HOST_INTR_ENABLED; + + return 0; + +err: + for (i = 0; i < k; i++) { + entryp = &hw->msix_entries[i]; + free_irq(entryp->vector, entryp->dev_id); + } + pci_disable_msix(hw->pdev); + + return -EINVAL; +} + +static void +csio_disable_msix(struct csio_hw *hw, bool free) +{ + int i; + struct csio_msix_entries *entryp; + int cnt = hw->num_sqsets + CSIO_EXTRA_VECS; + + if (free) { + for (i = 0; i < cnt; i++) { + entryp = &hw->msix_entries[i]; + free_irq(entryp->vector, entryp->dev_id); + } + } + pci_disable_msix(hw->pdev); +} + +/* Reduce per-port max possible CPUs */ +static void +csio_reduce_sqsets(struct csio_hw *hw, int cnt) +{ + int i; + struct csio_scsi_cpu_info *info; + + while (cnt < hw->num_sqsets) { + for (i = 0; i < hw->num_pports; i++) { + info = &hw->scsi_cpu_info[i]; + if (info->max_cpus > 1) { + info->max_cpus--; + hw->num_sqsets--; + if (hw->num_sqsets <= cnt) + break; + } + } + } + + csio_dbg(hw, "Reduced sqsets to %d\n", hw->num_sqsets); +} + +static int +csio_enable_msix(struct csio_hw *hw) +{ + int rv, i, j, k, n, min, cnt; + struct csio_msix_entries *entryp; + struct msix_entry *entries; + int extra = CSIO_EXTRA_VECS; + struct csio_scsi_cpu_info *info; + + min = hw->num_pports + extra; + cnt = hw->num_sqsets + extra; + + /* Max vectors required based on #niqs configured in fw */ + if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS || !csio_is_hw_master(hw)) + cnt = min_t(uint8_t, hw->cfg_niq, cnt); + + entries = kzalloc(sizeof(struct msix_entry) * cnt, GFP_KERNEL); + if (!entries) + return -ENOMEM; + + for (i = 0; i < cnt; i++) + entries[i].entry = (uint16_t)i; + + csio_dbg(hw, "FW supp #niq:%d, trying %d msix's\n", hw->cfg_niq, cnt); + + while ((rv = pci_enable_msix(hw->pdev, entries, cnt)) >= min) + cnt = rv; + if (!rv) { + if (cnt < (hw->num_sqsets + extra)) { + csio_dbg(hw, "Reducing sqsets to %d\n", cnt - extra); + csio_reduce_sqsets(hw, cnt - extra); + } + } else { + if (rv > 0) { + pci_disable_msix(hw->pdev); + csio_info(hw, "Not using MSI-X, remainder:%d\n", rv); + } + + kfree(entries); + return -ENOMEM; + } + + /* Save off vectors */ + for (i = 0; i < cnt; i++) { + entryp = &hw->msix_entries[i]; + entryp->vector = entries[i].vector; + } + + /* Distribute vectors */ + k = 0; + csio_set_nondata_intr_idx(hw, entries[k].entry); + csio_set_mb_intr_idx(csio_hw_to_mbm(hw), entries[k++].entry); + csio_set_fwevt_intr_idx(hw, entries[k++].entry); + + for (i = 0; i < hw->num_pports; i++) { + info = &hw->scsi_cpu_info[i]; + + for (j = 0; j < hw->num_scsi_msix_cpus; j++) { + n = (j % info->max_cpus) + k; + hw->sqset[i][j].intr_idx = entries[n].entry; + } + + k += info->max_cpus; + } + + kfree(entries); + return 0; +} + +void +csio_intr_enable(struct csio_hw *hw) +{ + hw->intr_mode = CSIO_IM_NONE; + hw->flags &= ~CSIO_HWF_HOST_INTR_ENABLED; + + /* Try MSIX, then MSI or fall back to INTx */ + if ((csio_msi == 2) && !csio_enable_msix(hw)) + hw->intr_mode = CSIO_IM_MSIX; + else { + /* Max iqs required based on #niqs configured in fw */ + if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS || + !csio_is_hw_master(hw)) { + int extra = CSIO_EXTRA_MSI_IQS; + + if (hw->cfg_niq < (hw->num_sqsets + extra)) { + csio_dbg(hw, "Reducing sqsets to %d\n", + hw->cfg_niq - extra); + csio_reduce_sqsets(hw, hw->cfg_niq - extra); + } + } + + if ((csio_msi == 1) && !pci_enable_msi(hw->pdev)) + hw->intr_mode = CSIO_IM_MSI; + else + hw->intr_mode = CSIO_IM_INTX; + } + + csio_dbg(hw, "Using %s interrupt mode.\n", + (hw->intr_mode == CSIO_IM_MSIX) ? "MSIX" : + ((hw->intr_mode == CSIO_IM_MSI) ? "MSI" : "INTx")); +} + +void +csio_intr_disable(struct csio_hw *hw, bool free) +{ + csio_hw_intr_disable(hw); + + switch (hw->intr_mode) { + case CSIO_IM_MSIX: + csio_disable_msix(hw, free); + break; + case CSIO_IM_MSI: + if (free) + free_irq(hw->pdev->irq, hw); + pci_disable_msi(hw->pdev); + break; + case CSIO_IM_INTX: + if (free) + free_irq(hw->pdev->irq, hw); + break; + default: + break; + } + hw->intr_mode = CSIO_IM_NONE; + hw->flags &= ~CSIO_HWF_HOST_INTR_ENABLED; +} diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c new file mode 100644 index 0000000..ffe9be0 --- /dev/null +++ b/drivers/scsi/csiostor/csio_lnode.c @@ -0,0 +1,2135 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/utsname.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> +#include <asm/unaligned.h> +#include <scsi/fc/fc_els.h> +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_gs.h> +#include <scsi/fc/fc_ms.h> + +#include "csio_hw.h" +#include "csio_mb.h" +#include "csio_lnode.h" +#include "csio_rnode.h" + +int csio_fcoe_rnodes = 1024; +int csio_fdmi_enable = 1; + +#define PORT_ID_PTR(_x) ((uint8_t *)(&_x) + 1) + +/* Lnode SM declarations */ +static void csio_lns_uninit(struct csio_lnode *, enum csio_ln_ev); +static void csio_lns_online(struct csio_lnode *, enum csio_ln_ev); +static void csio_lns_ready(struct csio_lnode *, enum csio_ln_ev); +static void csio_lns_offline(struct csio_lnode *, enum csio_ln_ev); + +static int csio_ln_mgmt_submit_req(struct csio_ioreq *, + void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *), + enum fcoe_cmn_type, struct csio_dma_buf *, uint32_t); + +/* LN event mapping */ +static enum csio_ln_ev fwevt_to_lnevt[] = { + CSIO_LNE_NONE, /* None */ + CSIO_LNE_NONE, /* PLOGI_ACC_RCVD */ + CSIO_LNE_NONE, /* PLOGI_RJT_RCVD */ + CSIO_LNE_NONE, /* PLOGI_RCVD */ + CSIO_LNE_NONE, /* PLOGO_RCVD */ + CSIO_LNE_NONE, /* PRLI_ACC_RCVD */ + CSIO_LNE_NONE, /* PRLI_RJT_RCVD */ + CSIO_LNE_NONE, /* PRLI_RCVD */ + CSIO_LNE_NONE, /* PRLO_RCVD */ + CSIO_LNE_NONE, /* NPORT_ID_CHGD */ + CSIO_LNE_LOGO, /* FLOGO_RCVD */ + CSIO_LNE_LOGO, /* CLR_VIRT_LNK_RCVD */ + CSIO_LNE_FAB_INIT_DONE,/* FLOGI_ACC_RCVD */ + CSIO_LNE_NONE, /* FLOGI_RJT_RCVD */ + CSIO_LNE_FAB_INIT_DONE,/* FDISC_ACC_RCVD */ + CSIO_LNE_NONE, /* FDISC_RJT_RCVD */ + CSIO_LNE_NONE, /* FLOGI_TMO_MAX_RETRY */ + CSIO_LNE_NONE, /* IMPL_LOGO_ADISC_ACC */ + CSIO_LNE_NONE, /* IMPL_LOGO_ADISC_RJT */ + CSIO_LNE_NONE, /* IMPL_LOGO_ADISC_CNFLT */ + CSIO_LNE_NONE, /* PRLI_TMO */ + CSIO_LNE_NONE, /* ADISC_TMO */ + CSIO_LNE_NONE, /* RSCN_DEV_LOST */ + CSIO_LNE_NONE, /* SCR_ACC_RCVD */ + CSIO_LNE_NONE, /* ADISC_RJT_RCVD */ + CSIO_LNE_NONE, /* LOGO_SNT */ + CSIO_LNE_NONE, /* PROTO_ERR_IMPL_LOGO */ +}; + +#define CSIO_FWE_TO_LNE(_evt) ((_evt > PROTO_ERR_IMPL_LOGO) ? \ + CSIO_LNE_NONE : \ + fwevt_to_lnevt[_evt]) + +#define csio_ct_rsp(cp) (((struct fc_ct_hdr *)cp)->ct_cmd) +#define csio_ct_reason(cp) (((struct fc_ct_hdr *)cp)->ct_reason) +#define csio_ct_expl(cp) (((struct fc_ct_hdr *)cp)->ct_explan) +#define csio_ct_get_pld(cp) ((void *)(((uint8_t *)cp) + FC_CT_HDR_LEN)) + +/* + * csio_ln_match_by_portid - lookup lnode using given portid. + * @hw: HW module + * @portid: port-id. + * + * If found, returns lnode matching given portid otherwise returns NULL. + */ +static struct csio_lnode * +csio_ln_lookup_by_portid(struct csio_hw *hw, uint8_t portid) +{ + struct csio_lnode *ln = hw->rln; + struct list_head *tmp; + + /* Match siblings lnode with portid */ + list_for_each(tmp, &hw->sln_head) { + ln = (struct csio_lnode *) tmp; + if (ln->portid == portid) + return ln; + } + + return NULL; +} + +/* + * csio_ln_lookup_by_vnpi - Lookup lnode using given vnp id. + * @hw - HW module + * @vnpi - vnp index. + * Returns - If found, returns lnode matching given vnp id + * otherwise returns NULL. + */ +static struct csio_lnode * +csio_ln_lookup_by_vnpi(struct csio_hw *hw, uint32_t vnp_id) +{ + struct list_head *tmp1, *tmp2; + struct csio_lnode *sln = NULL, *cln = NULL; + + if (list_empty(&hw->sln_head)) { + CSIO_INC_STATS(hw, n_lnlkup_miss); + return NULL; + } + /* Traverse sibling lnodes */ + list_for_each(tmp1, &hw->sln_head) { + sln = (struct csio_lnode *) tmp1; + + /* Match sibling lnode */ + if (sln->vnp_flowid == vnp_id) + return sln; + + if (list_empty(&sln->cln_head)) + continue; + + /* Traverse children lnodes */ + list_for_each(tmp2, &sln->cln_head) { + cln = (struct csio_lnode *) tmp2; + + if (cln->vnp_flowid == vnp_id) + return cln; + } + } + CSIO_INC_STATS(hw, n_lnlkup_miss); + return NULL; +} + +/** + * csio_lnode_lookup_by_wwpn - Lookup lnode using given wwpn. + * @hw: HW module. + * @wwpn: WWPN. + * + * If found, returns lnode matching given wwpn, returns NULL otherwise. + */ +struct csio_lnode * +csio_lnode_lookup_by_wwpn(struct csio_hw *hw, uint8_t *wwpn) +{ + struct list_head *tmp1, *tmp2; + struct csio_lnode *sln = NULL, *cln = NULL; + + if (list_empty(&hw->sln_head)) { + CSIO_INC_STATS(hw, n_lnlkup_miss); + return NULL; + } + /* Traverse sibling lnodes */ + list_for_each(tmp1, &hw->sln_head) { + sln = (struct csio_lnode *) tmp1; + + /* Match sibling lnode */ + if (!memcmp(csio_ln_wwpn(sln), wwpn, 8)) + return sln; + + if (list_empty(&sln->cln_head)) + continue; + + /* Traverse children lnodes */ + list_for_each(tmp2, &sln->cln_head) { + cln = (struct csio_lnode *) tmp2; + + if (!memcmp(csio_ln_wwpn(cln), wwpn, 8)) + return cln; + } + } + return NULL; +} + +/* FDMI */ +static void +csio_fill_ct_iu(void *buf, uint8_t type, uint8_t sub_type, uint16_t op) +{ + struct fc_ct_hdr *cmd = (struct fc_ct_hdr *)buf; + cmd->ct_rev = FC_CT_REV; + cmd->ct_fs_type = type; + cmd->ct_fs_subtype = sub_type; + cmd->ct_cmd = htons(op); +} + +static int +csio_hostname(uint8_t *buf, size_t buf_len) +{ + if (snprintf(buf, buf_len, "%s", init_utsname()->nodename) > 0) + return 0; + return -1; +} + +static int +csio_osname(uint8_t *buf, size_t buf_len) +{ + if (snprintf(buf, buf_len, "%s %s %s", + init_utsname()->sysname, + init_utsname()->release, + init_utsname()->version) > 0) + return 0; + + return -1; +} + +static inline void +csio_append_attrib(uint8_t **ptr, uint16_t type, uint8_t *val, uint16_t len) +{ + struct fc_fdmi_attr_entry *ae = (struct fc_fdmi_attr_entry *)*ptr; + ae->type = htons(type); + len += 4; /* includes attribute type and length */ + len = (len + 3) & ~3; /* should be multiple of 4 bytes */ + ae->len = htons(len); + memcpy(ae->value, val, len); + *ptr += len; +} + +/* + * csio_ln_fdmi_done - FDMI registeration completion + * @hw: HW context + * @fdmi_req: fdmi request + */ +static void +csio_ln_fdmi_done(struct csio_hw *hw, struct csio_ioreq *fdmi_req) +{ + void *cmd; + struct csio_lnode *ln = fdmi_req->lnode; + + if (fdmi_req->wr_status != FW_SUCCESS) { + csio_ln_dbg(ln, "WR error:%x in processing fdmi rpa cmd\n", + fdmi_req->wr_status); + CSIO_INC_STATS(ln, n_fdmi_err); + } + + cmd = fdmi_req->dma_buf.vaddr; + if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) { + csio_ln_dbg(ln, "fdmi rpa cmd rejected reason %x expl %x\n", + csio_ct_reason(cmd), csio_ct_expl(cmd)); + } +} + +/* + * csio_ln_fdmi_rhba_cbfn - RHBA completion + * @hw: HW context + * @fdmi_req: fdmi request + */ +static void +csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req) +{ + void *cmd; + uint8_t *pld; + uint32_t len = 0; + __be32 val; + __be16 mfs; + uint32_t numattrs = 0; + struct csio_lnode *ln = fdmi_req->lnode; + struct fs_fdmi_attrs *attrib_blk; + struct fc_fdmi_port_name *port_name; + uint8_t buf[64]; + uint8_t *fc4_type; + + if (fdmi_req->wr_status != FW_SUCCESS) { + csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n", + fdmi_req->wr_status); + CSIO_INC_STATS(ln, n_fdmi_err); + } + + cmd = fdmi_req->dma_buf.vaddr; + if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) { + csio_ln_dbg(ln, "fdmi rhba cmd rejected reason %x expl %x\n", + csio_ct_reason(cmd), csio_ct_expl(cmd)); + } + + if (!csio_is_rnode_ready(fdmi_req->rnode)) { + CSIO_INC_STATS(ln, n_fdmi_err); + return; + } + + /* Prepare CT hdr for RPA cmd */ + memset(cmd, 0, FC_CT_HDR_LEN); + csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_RPA); + + /* Prepare RPA payload */ + pld = (uint8_t *)csio_ct_get_pld(cmd); + port_name = (struct fc_fdmi_port_name *)pld; + memcpy(&port_name->portname, csio_ln_wwpn(ln), 8); + pld += sizeof(*port_name); + + /* Start appending Port attributes */ + attrib_blk = (struct fs_fdmi_attrs *)pld; + attrib_blk->numattrs = 0; + len += sizeof(attrib_blk->numattrs); + pld += sizeof(attrib_blk->numattrs); + + fc4_type = &buf[0]; + memset(fc4_type, 0, FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + fc4_type[2] = 1; + fc4_type[7] = 1; + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_FC4TYPES, + fc4_type, FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + numattrs++; + val = htonl(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_SUPPORTEDSPEED, + (uint8_t *)&val, + FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN); + numattrs++; + + if (hw->pport[ln->portid].link_speed == FW_PORT_CAP_SPEED_1G) + val = htonl(FC_PORTSPEED_1GBIT); + else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP_SPEED_10G) + val = htonl(FC_PORTSPEED_10GBIT); + else + val = htonl(CSIO_HBA_PORTSPEED_UNKNOWN); + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_CURRENTPORTSPEED, + (uint8_t *)&val, + FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN); + numattrs++; + + mfs = ln->ln_sparm.csp.sp_bb_data; + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_MAXFRAMESIZE, + (uint8_t *)&mfs, FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN); + numattrs++; + + strcpy(buf, "csiostor"); + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_OSDEVICENAME, buf, + (uint16_t)strlen(buf)); + numattrs++; + + if (!csio_hostname(buf, sizeof(buf))) { + csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_HOSTNAME, + buf, (uint16_t)strlen(buf)); + numattrs++; + } + attrib_blk->numattrs = htonl(numattrs); + len = (uint32_t)(pld - (uint8_t *)cmd); + + /* Submit FDMI RPA request */ + spin_lock_irq(&hw->lock); + if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done, + FCOE_CT, &fdmi_req->dma_buf, len)) { + CSIO_INC_STATS(ln, n_fdmi_err); + csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n"); + } + spin_unlock_irq(&hw->lock); +} + +/* + * csio_ln_fdmi_dprt_cbfn - DPRT completion + * @hw: HW context + * @fdmi_req: fdmi request + */ +static void +csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req) +{ + void *cmd; + uint8_t *pld; + uint32_t len = 0; + uint32_t numattrs = 0; + __be32 maxpayload = htonl(65536); + struct fc_fdmi_hba_identifier *hbaid; + struct csio_lnode *ln = fdmi_req->lnode; + struct fc_fdmi_rpl *reg_pl; + struct fs_fdmi_attrs *attrib_blk; + uint8_t buf[64]; + + if (fdmi_req->wr_status != FW_SUCCESS) { + csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n", + fdmi_req->wr_status); + CSIO_INC_STATS(ln, n_fdmi_err); + } + + if (!csio_is_rnode_ready(fdmi_req->rnode)) { + CSIO_INC_STATS(ln, n_fdmi_err); + return; + } + cmd = fdmi_req->dma_buf.vaddr; + if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) { + csio_ln_dbg(ln, "fdmi dprt cmd rejected reason %x expl %x\n", + csio_ct_reason(cmd), csio_ct_expl(cmd)); + } + + /* Prepare CT hdr for RHBA cmd */ + memset(cmd, 0, FC_CT_HDR_LEN); + csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_RHBA); + len = FC_CT_HDR_LEN; + + /* Prepare RHBA payload */ + pld = (uint8_t *)csio_ct_get_pld(cmd); + hbaid = (struct fc_fdmi_hba_identifier *)pld; + memcpy(&hbaid->id, csio_ln_wwpn(ln), 8); /* HBA identifer */ + pld += sizeof(*hbaid); + + /* Register one port per hba */ + reg_pl = (struct fc_fdmi_rpl *)pld; + reg_pl->numport = htonl(1); + memcpy(®_pl->port[0].portname, csio_ln_wwpn(ln), 8); + pld += sizeof(*reg_pl); + + /* Start appending HBA attributes hba */ + attrib_blk = (struct fs_fdmi_attrs *)pld; + attrib_blk->numattrs = 0; + len += sizeof(attrib_blk->numattrs); + pld += sizeof(attrib_blk->numattrs); + + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_NODENAME, csio_ln_wwnn(ln), + FC_FDMI_HBA_ATTR_NODENAME_LEN); + numattrs++; + + memset(buf, 0, sizeof(buf)); + + strcpy(buf, "Chelsio Communications"); + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MANUFACTURER, buf, + (uint16_t)strlen(buf)); + numattrs++; + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_SERIALNUMBER, + hw->vpd.sn, (uint16_t)sizeof(hw->vpd.sn)); + numattrs++; + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODEL, hw->vpd.id, + (uint16_t)sizeof(hw->vpd.id)); + numattrs++; + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODELDESCRIPTION, + hw->model_desc, (uint16_t)strlen(hw->model_desc)); + numattrs++; + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_HARDWAREVERSION, + hw->hw_ver, (uint16_t)sizeof(hw->hw_ver)); + numattrs++; + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_FIRMWAREVERSION, + hw->fwrev_str, (uint16_t)strlen(hw->fwrev_str)); + numattrs++; + + if (!csio_osname(buf, sizeof(buf))) { + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_OSNAMEVERSION, + buf, (uint16_t)strlen(buf)); + numattrs++; + } + + csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MAXCTPAYLOAD, + (uint8_t *)&maxpayload, + FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN); + len = (uint32_t)(pld - (uint8_t *)cmd); + numattrs++; + attrib_blk->numattrs = htonl(numattrs); + + /* Submit FDMI RHBA request */ + spin_lock_irq(&hw->lock); + if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn, + FCOE_CT, &fdmi_req->dma_buf, len)) { + CSIO_INC_STATS(ln, n_fdmi_err); + csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n"); + } + spin_unlock_irq(&hw->lock); +} + +/* + * csio_ln_fdmi_dhba_cbfn - DHBA completion + * @hw: HW context + * @fdmi_req: fdmi request + */ +static void +csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req) +{ + struct csio_lnode *ln = fdmi_req->lnode; + void *cmd; + struct fc_fdmi_port_name *port_name; + uint32_t len; + + if (fdmi_req->wr_status != FW_SUCCESS) { + csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n", + fdmi_req->wr_status); + CSIO_INC_STATS(ln, n_fdmi_err); + } + + if (!csio_is_rnode_ready(fdmi_req->rnode)) { + CSIO_INC_STATS(ln, n_fdmi_err); + return; + } + cmd = fdmi_req->dma_buf.vaddr; + if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) { + csio_ln_dbg(ln, "fdmi dhba cmd rejected reason %x expl %x\n", + csio_ct_reason(cmd), csio_ct_expl(cmd)); + } + + /* Send FDMI cmd to de-register any Port attributes if registered + * before + */ + + /* Prepare FDMI DPRT cmd */ + memset(cmd, 0, FC_CT_HDR_LEN); + csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_DPRT); + len = FC_CT_HDR_LEN; + port_name = (struct fc_fdmi_port_name *)csio_ct_get_pld(cmd); + memcpy(&port_name->portname, csio_ln_wwpn(ln), 8); + len += sizeof(*port_name); + + /* Submit FDMI request */ + spin_lock_irq(&hw->lock); + if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn, + FCOE_CT, &fdmi_req->dma_buf, len)) { + CSIO_INC_STATS(ln, n_fdmi_err); + csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n"); + } + spin_unlock_irq(&hw->lock); +} + +/** + * csio_ln_fdmi_start - Start an FDMI request. + * @ln: lnode + * @context: session context + * + * Issued with lock held. + */ +int +csio_ln_fdmi_start(struct csio_lnode *ln, void *context) +{ + struct csio_ioreq *fdmi_req; + struct csio_rnode *fdmi_rn = (struct csio_rnode *)context; + void *cmd; + struct fc_fdmi_hba_identifier *hbaid; + uint32_t len; + + if (!(ln->flags & CSIO_LNF_FDMI_ENABLE)) + return -EPROTONOSUPPORT; + + if (!csio_is_rnode_ready(fdmi_rn)) + CSIO_INC_STATS(ln, n_fdmi_err); + + /* Send FDMI cmd to de-register any HBA attributes if registered + * before + */ + + fdmi_req = ln->mgmt_req; + fdmi_req->lnode = ln; + fdmi_req->rnode = fdmi_rn; + + /* Prepare FDMI DHBA cmd */ + cmd = fdmi_req->dma_buf.vaddr; + memset(cmd, 0, FC_CT_HDR_LEN); + csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_DHBA); + len = FC_CT_HDR_LEN; + + hbaid = (struct fc_fdmi_hba_identifier *)csio_ct_get_pld(cmd); + memcpy(&hbaid->id, csio_ln_wwpn(ln), 8); + len += sizeof(*hbaid); + + /* Submit FDMI request */ + if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dhba_cbfn, + FCOE_CT, &fdmi_req->dma_buf, len)) { + CSIO_INC_STATS(ln, n_fdmi_err); + csio_ln_dbg(ln, "Failed to issue fdmi dhba req\n"); + } + + return 0; +} + +/* + * csio_ln_vnp_read_cbfn - vnp read completion handler. + * @hw: HW lnode + * @cbfn: Completion handler. + * + * Reads vnp response and updates ln parameters. + */ +static void +csio_ln_vnp_read_cbfn(struct csio_hw *hw, struct csio_mb *mbp) +{ + struct csio_lnode *ln = ((struct csio_lnode *)mbp->priv); + struct fw_fcoe_vnp_cmd *rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb); + struct fc_els_csp *csp; + struct fc_els_cssp *clsp; + enum fw_retval retval; + __be32 nport_id; + + retval = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)); + if (retval != FW_SUCCESS) { + csio_err(hw, "FCOE VNP read cmd returned error:0x%x\n", retval); + mempool_free(mbp, hw->mb_mempool); + return; + } + + spin_lock_irq(&hw->lock); + + memcpy(ln->mac, rsp->vnport_mac, sizeof(ln->mac)); + memcpy(&nport_id, &rsp->vnport_mac[3], sizeof(uint8_t)*3); + ln->nport_id = ntohl(nport_id); + ln->nport_id = ln->nport_id >> 8; + + /* Update WWNs */ + /* + * This may look like a duplication of what csio_fcoe_enable_link() + * does, but is absolutely necessary if the vnpi changes between + * a FCOE LINK UP and FCOE LINK DOWN. + */ + memcpy(csio_ln_wwnn(ln), rsp->vnport_wwnn, 8); + memcpy(csio_ln_wwpn(ln), rsp->vnport_wwpn, 8); + + /* Copy common sparam */ + csp = (struct fc_els_csp *)rsp->cmn_srv_parms; + ln->ln_sparm.csp.sp_hi_ver = csp->sp_hi_ver; + ln->ln_sparm.csp.sp_lo_ver = csp->sp_lo_ver; + ln->ln_sparm.csp.sp_bb_cred = csp->sp_bb_cred; + ln->ln_sparm.csp.sp_features = csp->sp_features; + ln->ln_sparm.csp.sp_bb_data = csp->sp_bb_data; + ln->ln_sparm.csp.sp_r_a_tov = csp->sp_r_a_tov; + ln->ln_sparm.csp.sp_e_d_tov = csp->sp_e_d_tov; + + /* Copy word 0 & word 1 of class sparam */ + clsp = (struct fc_els_cssp *)rsp->clsp_word_0_1; + ln->ln_sparm.clsp[2].cp_class = clsp->cp_class; + ln->ln_sparm.clsp[2].cp_init = clsp->cp_init; + ln->ln_sparm.clsp[2].cp_recip = clsp->cp_recip; + ln->ln_sparm.clsp[2].cp_rdfs = clsp->cp_rdfs; + + spin_unlock_irq(&hw->lock); + + mempool_free(mbp, hw->mb_mempool); + + /* Send an event to update local attribs */ + csio_lnode_async_event(ln, CSIO_LN_FC_ATTRIB_UPDATE); +} + +/* + * csio_ln_vnp_read - Read vnp params. + * @ln: lnode + * @cbfn: Completion handler. + * + * Issued with lock held. + */ +static int +csio_ln_vnp_read(struct csio_lnode *ln, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct csio_hw *hw = ln->hwp; + struct csio_mb *mbp; + + /* Allocate Mbox request */ + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Prepare VNP Command */ + csio_fcoe_vnp_read_init_mb(ln, mbp, + CSIO_MB_DEFAULT_TMO, + ln->fcf_flowid, + ln->vnp_flowid, + cbfn); + + /* Issue MBOX cmd */ + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Failed to issue mbox FCoE VNP command\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + return 0; +} + +/* + * csio_fcoe_enable_link - Enable fcoe link. + * @ln: lnode + * @enable: enable/disable + * Issued with lock held. + * Issues mbox cmd to bring up FCOE link on port associated with given ln. + */ +static int +csio_fcoe_enable_link(struct csio_lnode *ln, bool enable) +{ + struct csio_hw *hw = ln->hwp; + struct csio_mb *mbp; + enum fw_retval retval; + uint8_t portid; + uint8_t sub_op; + struct fw_fcoe_link_cmd *lcmd; + int i; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + portid = ln->portid; + sub_op = enable ? FCOE_LINK_UP : FCOE_LINK_DOWN; + + csio_dbg(hw, "bringing FCOE LINK %s on Port:%d\n", + sub_op ? "UP" : "DOWN", portid); + + csio_write_fcoe_link_cond_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO, + portid, sub_op, 0, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FCOE LINK cmd on port[%d]\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, + "FCOE LINK %s cmd on port[%d] failed with " + "ret:x%x\n", sub_op ? "UP" : "DOWN", portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + if (!enable) + goto out; + + lcmd = (struct fw_fcoe_link_cmd *)mbp->mb; + + memcpy(csio_ln_wwnn(ln), lcmd->vnport_wwnn, 8); + memcpy(csio_ln_wwpn(ln), lcmd->vnport_wwpn, 8); + + for (i = 0; i < CSIO_MAX_PPORTS; i++) + if (hw->pport[i].portid == portid) + memcpy(hw->pport[i].mac, lcmd->phy_mac, 6); + +out: + mempool_free(mbp, hw->mb_mempool); + return 0; +} + +/* + * csio_ln_read_fcf_cbfn - Read fcf parameters + * @ln: lnode + * + * read fcf response and Update ln fcf information. + */ +static void +csio_ln_read_fcf_cbfn(struct csio_hw *hw, struct csio_mb *mbp) +{ + struct csio_lnode *ln = (struct csio_lnode *)mbp->priv; + struct csio_fcf_info *fcf_info; + struct fw_fcoe_fcf_cmd *rsp = + (struct fw_fcoe_fcf_cmd *)(mbp->mb); + enum fw_retval retval; + + retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16)); + if (retval != FW_SUCCESS) { + csio_ln_err(ln, "FCOE FCF cmd failed with ret x%x\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return; + } + + spin_lock_irq(&hw->lock); + fcf_info = ln->fcfinfo; + fcf_info->priority = FW_FCOE_FCF_CMD_PRIORITY_GET( + ntohs(rsp->priority_pkd)); + fcf_info->vf_id = ntohs(rsp->vf_id); + fcf_info->vlan_id = rsp->vlan_id; + fcf_info->max_fcoe_size = ntohs(rsp->max_fcoe_size); + fcf_info->fka_adv = be32_to_cpu(rsp->fka_adv); + fcf_info->fcfi = FW_FCOE_FCF_CMD_FCFI_GET(ntohl(rsp->op_to_fcfi)); + fcf_info->fpma = FW_FCOE_FCF_CMD_FPMA_GET(rsp->fpma_to_portid); + fcf_info->spma = FW_FCOE_FCF_CMD_SPMA_GET(rsp->fpma_to_portid); + fcf_info->login = FW_FCOE_FCF_CMD_LOGIN_GET(rsp->fpma_to_portid); + fcf_info->portid = FW_FCOE_FCF_CMD_PORTID_GET(rsp->fpma_to_portid); + memcpy(fcf_info->fc_map, rsp->fc_map, sizeof(fcf_info->fc_map)); + memcpy(fcf_info->mac, rsp->mac, sizeof(fcf_info->mac)); + memcpy(fcf_info->name_id, rsp->name_id, sizeof(fcf_info->name_id)); + memcpy(fcf_info->fabric, rsp->fabric, sizeof(fcf_info->fabric)); + memcpy(fcf_info->spma_mac, rsp->spma_mac, sizeof(fcf_info->spma_mac)); + + spin_unlock_irq(&hw->lock); + + mempool_free(mbp, hw->mb_mempool); +} + +/* + * csio_ln_read_fcf_entry - Read fcf entry. + * @ln: lnode + * @cbfn: Completion handler. + * + * Issued with lock held. + */ +static int +csio_ln_read_fcf_entry(struct csio_lnode *ln, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct csio_hw *hw = ln->hwp; + struct csio_mb *mbp; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get FCoE FCF information */ + csio_fcoe_read_fcf_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO, + ln->portid, ln->fcf_flowid, cbfn); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FCOE FCF cmd\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + return 0; +} + +/* + * csio_handle_link_up - Logical Linkup event. + * @hw - HW module. + * @portid - Physical port number + * @fcfi - FCF index. + * @vnpi - VNP index. + * Returns - none. + * + * This event is received from FW, when virtual link is established between + * Physical port[ENode] and FCF. If its new vnpi, then local node object is + * created on this FCF and set to [ONLINE] state. + * Lnode waits for FW_RDEV_CMD event to be received indicating that + * Fabric login is completed and lnode moves to [READY] state. + * + * This called with hw lock held + */ +static void +csio_handle_link_up(struct csio_hw *hw, uint8_t portid, uint32_t fcfi, + uint32_t vnpi) +{ + struct csio_lnode *ln = NULL; + + /* Lookup lnode based on vnpi */ + ln = csio_ln_lookup_by_vnpi(hw, vnpi); + if (!ln) { + /* Pick lnode based on portid */ + ln = csio_ln_lookup_by_portid(hw, portid); + if (!ln) { + csio_err(hw, "failed to lookup fcoe lnode on port:%d\n", + portid); + CSIO_DB_ASSERT(0); + return; + } + + /* Check if lnode has valid vnp flowid */ + if (ln->vnp_flowid != CSIO_INVALID_IDX) { + /* New VN-Port */ + spin_unlock_irq(&hw->lock); + csio_lnode_alloc(hw); + spin_lock_irq(&hw->lock); + if (!ln) { + csio_err(hw, + "failed to allocate fcoe lnode" + "for port:%d vnpi:x%x\n", + portid, vnpi); + CSIO_DB_ASSERT(0); + return; + } + ln->portid = portid; + } + ln->vnp_flowid = vnpi; + ln->dev_num &= ~0xFFFF; + ln->dev_num |= vnpi; + } + + /*Initialize fcfi */ + ln->fcf_flowid = fcfi; + + csio_info(hw, "Port:%d - FCOE LINK UP\n", portid); + + CSIO_INC_STATS(ln, n_link_up); + + /* Send LINKUP event to SM */ + csio_post_event(&ln->sm, CSIO_LNE_LINKUP); +} + +/* + * csio_post_event_rns + * @ln - FCOE lnode + * @evt - Given rnode event + * Returns - none + * + * Posts given rnode event to all FCOE rnodes connected with given Lnode. + * This routine is invoked when lnode receives LINK_DOWN/DOWN_LINK/CLOSE + * event. + * + * This called with hw lock held + */ +static void +csio_post_event_rns(struct csio_lnode *ln, enum csio_rn_ev evt) +{ + struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead; + struct list_head *tmp, *next; + struct csio_rnode *rn; + + list_for_each_safe(tmp, next, &rnhead->sm.sm_list) { + rn = (struct csio_rnode *) tmp; + csio_post_event(&rn->sm, evt); + } +} + +/* + * csio_cleanup_rns + * @ln - FCOE lnode + * Returns - none + * + * Frees all FCOE rnodes connected with given Lnode. + * + * This called with hw lock held + */ +static void +csio_cleanup_rns(struct csio_lnode *ln) +{ + struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead; + struct list_head *tmp, *next_rn; + struct csio_rnode *rn; + + list_for_each_safe(tmp, next_rn, &rnhead->sm.sm_list) { + rn = (struct csio_rnode *) tmp; + csio_put_rnode(ln, rn); + } + +} + +/* + * csio_post_event_lns + * @ln - FCOE lnode + * @evt - Given lnode event + * Returns - none + * + * Posts given lnode event to all FCOE lnodes connected with given Lnode. + * This routine is invoked when lnode receives LINK_DOWN/DOWN_LINK/CLOSE + * event. + * + * This called with hw lock held + */ +static void +csio_post_event_lns(struct csio_lnode *ln, enum csio_ln_ev evt) +{ + struct list_head *tmp; + struct csio_lnode *cln, *sln; + + /* If NPIV lnode, send evt only to that and return */ + if (csio_is_npiv_ln(ln)) { + csio_post_event(&ln->sm, evt); + return; + } + + sln = ln; + /* Traverse children lnodes list and send evt */ + list_for_each(tmp, &sln->cln_head) { + cln = (struct csio_lnode *) tmp; + csio_post_event(&cln->sm, evt); + } + + /* Send evt to parent lnode */ + csio_post_event(&ln->sm, evt); +} + +/* + * csio_ln_down - Lcoal nport is down + * @ln - FCOE Lnode + * Returns - none + * + * Sends LINK_DOWN events to Lnode and its associated NPIVs lnodes. + * + * This called with hw lock held + */ +static void +csio_ln_down(struct csio_lnode *ln) +{ + csio_post_event_lns(ln, CSIO_LNE_LINK_DOWN); +} + +/* + * csio_handle_link_down - Logical Linkdown event. + * @hw - HW module. + * @portid - Physical port number + * @fcfi - FCF index. + * @vnpi - VNP index. + * Returns - none + * + * This event is received from FW, when virtual link goes down between + * Physical port[ENode] and FCF. Lnode and its associated NPIVs lnode hosted on + * this vnpi[VN-Port] will be de-instantiated. + * + * This called with hw lock held + */ +static void +csio_handle_link_down(struct csio_hw *hw, uint8_t portid, uint32_t fcfi, + uint32_t vnpi) +{ + struct csio_fcf_info *fp; + struct csio_lnode *ln; + + /* Lookup lnode based on vnpi */ + ln = csio_ln_lookup_by_vnpi(hw, vnpi); + if (ln) { + fp = ln->fcfinfo; + CSIO_INC_STATS(ln, n_link_down); + + /*Warn if linkdown received if lnode is not in ready state */ + if (!csio_is_lnode_ready(ln)) { + csio_ln_warn(ln, + "warn: FCOE link is already in offline " + "Ignoring Fcoe linkdown event on portid %d\n", + portid); + CSIO_INC_STATS(ln, n_evt_drop); + return; + } + + /* Verify portid */ + if (fp->portid != portid) { + csio_ln_warn(ln, + "warn: FCOE linkdown recv with " + "invalid port %d\n", portid); + CSIO_INC_STATS(ln, n_evt_drop); + return; + } + + /* verify fcfi */ + if (ln->fcf_flowid != fcfi) { + csio_ln_warn(ln, + "warn: FCOE linkdown recv with " + "invalid fcfi x%x\n", fcfi); + CSIO_INC_STATS(ln, n_evt_drop); + return; + } + + csio_info(hw, "Port:%d - FCOE LINK DOWN\n", portid); + + /* Send LINK_DOWN event to lnode s/m */ + csio_ln_down(ln); + + return; + } else { + csio_warn(hw, + "warn: FCOE linkdown recv with invalid vnpi x%x\n", + vnpi); + CSIO_INC_STATS(hw, n_evt_drop); + } +} + +/* + * csio_is_lnode_ready - Checks FCOE lnode is in ready state. + * @ln: Lnode module + * + * Returns True if FCOE lnode is in ready state. + */ +int +csio_is_lnode_ready(struct csio_lnode *ln) +{ + return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)); +} + +/*****************************************************************************/ +/* START: Lnode SM */ +/*****************************************************************************/ +/* + * csio_lns_uninit - The request in uninit state. + * @ln - FCOE lnode. + * @evt - Event to be processed. + * + * Process the given lnode event which is currently in "uninit" state. + * Invoked with HW lock held. + * Return - none. + */ +static void +csio_lns_uninit(struct csio_lnode *ln, enum csio_ln_ev evt) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_lnode *rln = hw->rln; + int rv; + + CSIO_INC_STATS(ln, n_evt_sm[evt]); + switch (evt) { + case CSIO_LNE_LINKUP: + csio_set_state(&ln->sm, csio_lns_online); + /* Read FCF only for physical lnode */ + if (csio_is_phys_ln(ln)) { + rv = csio_ln_read_fcf_entry(ln, + csio_ln_read_fcf_cbfn); + if (rv != 0) { + /* TODO: Send HW RESET event */ + CSIO_INC_STATS(ln, n_err); + break; + } + + /* Add FCF record */ + list_add_tail(&ln->fcfinfo->list, &rln->fcf_lsthead); + } + + rv = csio_ln_vnp_read(ln, csio_ln_vnp_read_cbfn); + if (rv != 0) { + /* TODO: Send HW RESET event */ + CSIO_INC_STATS(ln, n_err); + } + break; + + case CSIO_LNE_DOWN_LINK: + break; + + default: + csio_ln_dbg(ln, + "unexp ln event %d recv from did:x%x in " + "ln state[uninit].\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_unexp); + break; + } /* switch event */ +} + +/* + * csio_lns_online - The request in online state. + * @ln - FCOE lnode. + * @evt - Event to be processed. + * + * Process the given lnode event which is currently in "online" state. + * Invoked with HW lock held. + * Return - none. + */ +static void +csio_lns_online(struct csio_lnode *ln, enum csio_ln_ev evt) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + + CSIO_INC_STATS(ln, n_evt_sm[evt]); + switch (evt) { + case CSIO_LNE_LINKUP: + csio_ln_warn(ln, + "warn: FCOE link is up already " + "Ignoring linkup on port:%d\n", ln->portid); + CSIO_INC_STATS(ln, n_evt_drop); + break; + + case CSIO_LNE_FAB_INIT_DONE: + csio_set_state(&ln->sm, csio_lns_ready); + + spin_unlock_irq(&hw->lock); + csio_lnode_async_event(ln, CSIO_LN_FC_LINKUP); + spin_lock_irq(&hw->lock); + + break; + + case CSIO_LNE_LINK_DOWN: + /* Fall through */ + case CSIO_LNE_DOWN_LINK: + csio_set_state(&ln->sm, csio_lns_uninit); + if (csio_is_phys_ln(ln)) { + /* Remove FCF entry */ + list_del_init(&ln->fcfinfo->list); + } + break; + + default: + csio_ln_dbg(ln, + "unexp ln event %d recv from did:x%x in " + "ln state[uninit].\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_unexp); + + break; + } /* switch event */ +} + +/* + * csio_lns_ready - The request in ready state. + * @ln - FCOE lnode. + * @evt - Event to be processed. + * + * Process the given lnode event which is currently in "ready" state. + * Invoked with HW lock held. + * Return - none. + */ +static void +csio_lns_ready(struct csio_lnode *ln, enum csio_ln_ev evt) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + + CSIO_INC_STATS(ln, n_evt_sm[evt]); + switch (evt) { + case CSIO_LNE_FAB_INIT_DONE: + csio_ln_dbg(ln, + "ignoring event %d recv from did x%x" + "in ln state[ready].\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_drop); + break; + + case CSIO_LNE_LINK_DOWN: + csio_set_state(&ln->sm, csio_lns_offline); + csio_post_event_rns(ln, CSIO_RNFE_DOWN); + + spin_unlock_irq(&hw->lock); + csio_lnode_async_event(ln, CSIO_LN_FC_LINKDOWN); + spin_lock_irq(&hw->lock); + + if (csio_is_phys_ln(ln)) { + /* Remove FCF entry */ + list_del_init(&ln->fcfinfo->list); + } + break; + + case CSIO_LNE_DOWN_LINK: + csio_set_state(&ln->sm, csio_lns_offline); + csio_post_event_rns(ln, CSIO_RNFE_DOWN); + + /* Host need to issue aborts in case if FW has not returned + * WRs with status "ABORTED" + */ + spin_unlock_irq(&hw->lock); + csio_lnode_async_event(ln, CSIO_LN_FC_LINKDOWN); + spin_lock_irq(&hw->lock); + + if (csio_is_phys_ln(ln)) { + /* Remove FCF entry */ + list_del_init(&ln->fcfinfo->list); + } + break; + + case CSIO_LNE_CLOSE: + csio_set_state(&ln->sm, csio_lns_uninit); + csio_post_event_rns(ln, CSIO_RNFE_CLOSE); + break; + + case CSIO_LNE_LOGO: + csio_set_state(&ln->sm, csio_lns_offline); + csio_post_event_rns(ln, CSIO_RNFE_DOWN); + break; + + default: + csio_ln_dbg(ln, + "unexp ln event %d recv from did:x%x in " + "ln state[uninit].\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_unexp); + CSIO_DB_ASSERT(0); + break; + } /* switch event */ +} + +/* + * csio_lns_offline - The request in offline state. + * @ln - FCOE lnode. + * @evt - Event to be processed. + * + * Process the given lnode event which is currently in "offline" state. + * Invoked with HW lock held. + * Return - none. + */ +static void +csio_lns_offline(struct csio_lnode *ln, enum csio_ln_ev evt) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_lnode *rln = hw->rln; + int rv; + + CSIO_INC_STATS(ln, n_evt_sm[evt]); + switch (evt) { + case CSIO_LNE_LINKUP: + csio_set_state(&ln->sm, csio_lns_online); + /* Read FCF only for physical lnode */ + if (csio_is_phys_ln(ln)) { + rv = csio_ln_read_fcf_entry(ln, + csio_ln_read_fcf_cbfn); + if (rv != 0) { + /* TODO: Send HW RESET event */ + CSIO_INC_STATS(ln, n_err); + break; + } + + /* Add FCF record */ + list_add_tail(&ln->fcfinfo->list, &rln->fcf_lsthead); + } + + rv = csio_ln_vnp_read(ln, csio_ln_vnp_read_cbfn); + if (rv != 0) { + /* TODO: Send HW RESET event */ + CSIO_INC_STATS(ln, n_err); + } + break; + + case CSIO_LNE_LINK_DOWN: + case CSIO_LNE_DOWN_LINK: + case CSIO_LNE_LOGO: + csio_ln_dbg(ln, + "ignoring event %d recv from did x%x" + "in ln state[offline].\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_drop); + break; + + case CSIO_LNE_CLOSE: + csio_set_state(&ln->sm, csio_lns_uninit); + csio_post_event_rns(ln, CSIO_RNFE_CLOSE); + break; + + default: + csio_ln_dbg(ln, + "unexp ln event %d recv from did:x%x in " + "ln state[offline]\n", evt, ln->nport_id); + CSIO_INC_STATS(ln, n_evt_unexp); + CSIO_DB_ASSERT(0); + break; + } /* switch event */ +} + +/*****************************************************************************/ +/* END: Lnode SM */ +/*****************************************************************************/ + +static void +csio_free_fcfinfo(struct kref *kref) +{ + struct csio_fcf_info *fcfinfo = container_of(kref, + struct csio_fcf_info, kref); + kfree(fcfinfo); +} + +/* Helper routines for attributes */ +/* + * csio_lnode_state_to_str - Get current state of FCOE lnode. + * @ln - lnode + * @str - state of lnode. + * + */ +void +csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str) +{ + if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) { + strcpy(str, "UNINIT"); + return; + } + if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) { + strcpy(str, "READY"); + return; + } + if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) { + strcpy(str, "OFFLINE"); + return; + } + strcpy(str, "UNKNOWN"); +} /* csio_lnode_state_to_str */ + + +int +csio_get_phy_port_stats(struct csio_hw *hw, uint8_t portid, + struct fw_fcoe_port_stats *port_stats) +{ + struct csio_mb *mbp; + struct fw_fcoe_port_cmd_params portparams; + enum fw_retval retval; + int idx; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + csio_err(hw, "FCoE FCF PARAMS command out of memory!\n"); + return -EINVAL; + } + portparams.portid = portid; + + for (idx = 1; idx <= 3; idx++) { + portparams.idx = (idx-1)*6 + 1; + portparams.nstats = 6; + if (idx == 3) + portparams.nstats = 4; + csio_fcoe_read_portparams_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, + &portparams, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FCoE port params failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + csio_mb_process_portparams_rsp(hw, mbp, &retval, + &portparams, port_stats); + } + + mempool_free(mbp, hw->mb_mempool); + return 0; +} + +/* + * csio_ln_mgmt_wr_handler -Mgmt Work Request handler. + * @wr - WR. + * @len - WR len. + * This handler is invoked when an outstanding mgmt WR is completed. + * Its invoked in the context of FW event worker thread for every + * mgmt event received. + * Return - none. + */ + +static void +csio_ln_mgmt_wr_handler(struct csio_hw *hw, void *wr, uint32_t len) +{ + struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw); + struct csio_ioreq *io_req = NULL; + struct fw_fcoe_els_ct_wr *wr_cmd; + + + wr_cmd = (struct fw_fcoe_els_ct_wr *) wr; + + if (len < sizeof(struct fw_fcoe_els_ct_wr)) { + csio_err(mgmtm->hw, + "Invalid ELS CT WR length recvd, len:%x\n", len); + mgmtm->stats.n_err++; + return; + } + + io_req = (struct csio_ioreq *) ((uintptr_t) wr_cmd->cookie); + io_req->wr_status = csio_wr_status(wr_cmd); + + /* lookup ioreq exists in our active Q */ + spin_lock_irq(&hw->lock); + if (csio_mgmt_req_lookup(mgmtm, io_req) != 0) { + csio_err(mgmtm->hw, + "Error- Invalid IO handle recv in WR. handle: %p\n", + io_req); + mgmtm->stats.n_err++; + spin_unlock_irq(&hw->lock); + return; + } + + mgmtm = csio_hw_to_mgmtm(hw); + + /* Dequeue from active queue */ + list_del_init(&io_req->sm.sm_list); + mgmtm->stats.n_active--; + spin_unlock_irq(&hw->lock); + + /* io_req will be freed by completion handler */ + if (io_req->io_cbfn) + io_req->io_cbfn(hw, io_req); +} + +/** + * csio_fcoe_fwevt_handler - Event handler for Firmware FCoE events. + * @hw: HW module + * @cpl_op: CPL opcode + * @cmd: FW cmd/WR. + * + * Process received FCoE cmd/WR event from FW. + */ +void +csio_fcoe_fwevt_handler(struct csio_hw *hw, __u8 cpl_op, __be64 *cmd) +{ + struct csio_lnode *ln; + struct csio_rnode *rn; + uint8_t portid, opcode = *(uint8_t *)cmd; + struct fw_fcoe_link_cmd *lcmd; + struct fw_wr_hdr *wr; + struct fw_rdev_wr *rdev_wr; + enum fw_fcoe_link_status lstatus; + uint32_t fcfi, rdev_flowid, vnpi; + enum csio_ln_ev evt; + + if (cpl_op == CPL_FW6_MSG && opcode == FW_FCOE_LINK_CMD) { + + lcmd = (struct fw_fcoe_link_cmd *)cmd; + lstatus = lcmd->lstatus; + portid = FW_FCOE_LINK_CMD_PORTID_GET( + ntohl(lcmd->op_to_portid)); + fcfi = FW_FCOE_LINK_CMD_FCFI_GET(ntohl(lcmd->sub_opcode_fcfi)); + vnpi = FW_FCOE_LINK_CMD_VNPI_GET(ntohl(lcmd->vnpi_pkd)); + + if (lstatus == FCOE_LINKUP) { + + /* HW lock here */ + spin_lock_irq(&hw->lock); + csio_handle_link_up(hw, portid, fcfi, vnpi); + spin_unlock_irq(&hw->lock); + /* HW un lock here */ + + } else if (lstatus == FCOE_LINKDOWN) { + + /* HW lock here */ + spin_lock_irq(&hw->lock); + csio_handle_link_down(hw, portid, fcfi, vnpi); + spin_unlock_irq(&hw->lock); + /* HW un lock here */ + } else { + csio_warn(hw, "Unexpected FCOE LINK status:0x%x\n", + lcmd->lstatus); + CSIO_INC_STATS(hw, n_cpl_unexp); + } + } else if (cpl_op == CPL_FW6_PLD) { + wr = (struct fw_wr_hdr *) (cmd + 4); + if (FW_WR_OP_GET(be32_to_cpu(wr->hi)) + == FW_RDEV_WR) { + + rdev_wr = (struct fw_rdev_wr *) (cmd + 4); + + rdev_flowid = FW_RDEV_WR_FLOWID_GET( + ntohl(rdev_wr->alloc_to_len16)); + vnpi = FW_RDEV_WR_ASSOC_FLOWID_GET( + ntohl(rdev_wr->flags_to_assoc_flowid)); + + csio_dbg(hw, + "FW_RDEV_WR: flowid:x%x ev_cause:x%x " + "vnpi:0x%x\n", rdev_flowid, + rdev_wr->event_cause, vnpi); + + if (rdev_wr->protocol != PROT_FCOE) { + csio_err(hw, + "FW_RDEV_WR: invalid proto:x%x " + "received with flowid:x%x\n", + rdev_wr->protocol, + rdev_flowid); + CSIO_INC_STATS(hw, n_evt_drop); + return; + } + + /* HW lock here */ + spin_lock_irq(&hw->lock); + ln = csio_ln_lookup_by_vnpi(hw, vnpi); + if (!ln) { + csio_err(hw, + "FW_DEV_WR: invalid vnpi:x%x received " + "with flowid:x%x\n", vnpi, rdev_flowid); + CSIO_INC_STATS(hw, n_evt_drop); + goto out_pld; + } + + rn = csio_confirm_rnode(ln, rdev_flowid, + &rdev_wr->u.fcoe_rdev); + if (!rn) { + csio_ln_dbg(ln, + "Failed to confirm rnode " + "for flowid:x%x\n", rdev_flowid); + CSIO_INC_STATS(hw, n_evt_drop); + goto out_pld; + } + + /* save previous event for debugging */ + ln->prev_evt = ln->cur_evt; + ln->cur_evt = rdev_wr->event_cause; + CSIO_INC_STATS(ln, n_evt_fw[rdev_wr->event_cause]); + + /* Translate all the fabric events to lnode SM events */ + evt = CSIO_FWE_TO_LNE(rdev_wr->event_cause); + if (evt) { + csio_ln_dbg(ln, + "Posting event to lnode event:%d " + "cause:%d flowid:x%x\n", evt, + rdev_wr->event_cause, rdev_flowid); + csio_post_event(&ln->sm, evt); + } + + /* Handover event to rn SM here. */ + csio_rnode_fwevt_handler(rn, rdev_wr->event_cause); +out_pld: + spin_unlock_irq(&hw->lock); + return; + } else { + csio_warn(hw, "unexpected WR op(0x%x) recv\n", + FW_WR_OP_GET(be32_to_cpu((wr->hi)))); + CSIO_INC_STATS(hw, n_cpl_unexp); + } + } else if (cpl_op == CPL_FW6_MSG) { + wr = (struct fw_wr_hdr *) (cmd); + if (FW_WR_OP_GET(be32_to_cpu(wr->hi)) == FW_FCOE_ELS_CT_WR) { + csio_ln_mgmt_wr_handler(hw, wr, + sizeof(struct fw_fcoe_els_ct_wr)); + } else { + csio_warn(hw, "unexpected WR op(0x%x) recv\n", + FW_WR_OP_GET(be32_to_cpu((wr->hi)))); + CSIO_INC_STATS(hw, n_cpl_unexp); + } + } else { + csio_warn(hw, "unexpected CPL op(0x%x) recv\n", opcode); + CSIO_INC_STATS(hw, n_cpl_unexp); + } +} + +/** + * csio_lnode_start - Kickstart lnode discovery. + * @ln: lnode + * + * This routine kickstarts the discovery by issuing an FCOE_LINK (up) command. + */ +int +csio_lnode_start(struct csio_lnode *ln) +{ + int rv = 0; + if (csio_is_phys_ln(ln) && !(ln->flags & CSIO_LNF_LINK_ENABLE)) { + rv = csio_fcoe_enable_link(ln, 1); + ln->flags |= CSIO_LNF_LINK_ENABLE; + } + + return rv; +} + +/** + * csio_lnode_stop - Stop the lnode. + * @ln: lnode + * + * This routine is invoked by HW module to stop lnode and its associated NPIV + * lnodes. + */ +void +csio_lnode_stop(struct csio_lnode *ln) +{ + csio_post_event_lns(ln, CSIO_LNE_DOWN_LINK); + if (csio_is_phys_ln(ln) && (ln->flags & CSIO_LNF_LINK_ENABLE)) { + csio_fcoe_enable_link(ln, 0); + ln->flags &= ~CSIO_LNF_LINK_ENABLE; + } + csio_ln_dbg(ln, "stopping ln :%p\n", ln); +} + +/** + * csio_lnode_close - Close an lnode. + * @ln: lnode + * + * This routine is invoked by HW module to close an lnode and its + * associated NPIV lnodes. Lnode and its associated NPIV lnodes are + * set to uninitialized state. + */ +void +csio_lnode_close(struct csio_lnode *ln) +{ + csio_post_event_lns(ln, CSIO_LNE_CLOSE); + if (csio_is_phys_ln(ln)) + ln->vnp_flowid = CSIO_INVALID_IDX; + + csio_ln_dbg(ln, "closed ln :%p\n", ln); +} + +/* + * csio_ln_prep_ecwr - Prepare ELS/CT WR. + * @io_req - IO request. + * @wr_len - WR len + * @immd_len - WR immediate data + * @sub_op - Sub opcode + * @sid - source portid. + * @did - destination portid + * @flow_id - flowid + * @fw_wr - ELS/CT WR to be prepared. + * Returns: 0 - on success + */ +static int +csio_ln_prep_ecwr(struct csio_ioreq *io_req, uint32_t wr_len, + uint32_t immd_len, uint8_t sub_op, uint32_t sid, + uint32_t did, uint32_t flow_id, uint8_t *fw_wr) +{ + struct fw_fcoe_els_ct_wr *wr; + __be32 port_id; + + wr = (struct fw_fcoe_els_ct_wr *)fw_wr; + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_FCOE_ELS_CT_WR) | + FW_FCOE_ELS_CT_WR_IMMDLEN(immd_len)); + + wr_len = DIV_ROUND_UP(wr_len, 16); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(flow_id) | + FW_WR_LEN16(wr_len)); + wr->els_ct_type = sub_op; + wr->ctl_pri = 0; + wr->cp_en_class = 0; + wr->cookie = io_req->fw_handle; + wr->iqid = cpu_to_be16(csio_q_physiqid( + io_req->lnode->hwp, io_req->iq_idx)); + wr->fl_to_sp = FW_FCOE_ELS_CT_WR_SP(1); + wr->tmo_val = (uint8_t) io_req->tmo; + port_id = htonl(sid); + memcpy(wr->l_id, PORT_ID_PTR(port_id), 3); + port_id = htonl(did); + memcpy(wr->r_id, PORT_ID_PTR(port_id), 3); + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(io_req->dma_buf.len); + wr->rsp_dmaaddr = cpu_to_be64(io_req->dma_buf.paddr); + return 0; +} + +/* + * csio_ln_mgmt_submit_wr - Post elsct work request. + * @mgmtm - mgmtm + * @io_req - io request. + * @sub_op - ELS or CT request type + * @pld - Dma Payload buffer + * @pld_len - Payload len + * Prepares ELSCT Work request and sents it to FW. + * Returns: 0 - on success + */ +static int +csio_ln_mgmt_submit_wr(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req, + uint8_t sub_op, struct csio_dma_buf *pld, + uint32_t pld_len) +{ + struct csio_wr_pair wrp; + struct csio_lnode *ln = io_req->lnode; + struct csio_rnode *rn = io_req->rnode; + struct csio_hw *hw = mgmtm->hw; + uint8_t fw_wr[64]; + struct ulptx_sgl dsgl; + uint32_t wr_size = 0; + uint8_t im_len = 0; + uint32_t wr_off = 0; + + int ret = 0; + + /* Calculate WR Size for this ELS REQ */ + wr_size = sizeof(struct fw_fcoe_els_ct_wr); + + /* Send as immediate data if pld < 256 */ + if (pld_len < 256) { + wr_size += ALIGN(pld_len, 8); + im_len = (uint8_t)pld_len; + } else + wr_size += sizeof(struct ulptx_sgl); + + /* Roundup WR size in units of 16 bytes */ + wr_size = ALIGN(wr_size, 16); + + /* Get WR to send ELS REQ */ + ret = csio_wr_get(hw, mgmtm->eq_idx, wr_size, &wrp); + if (ret != 0) { + csio_err(hw, "Failed to get WR for ec_req %p ret:%d\n", + io_req, ret); + return ret; + } + + /* Prepare Generic WR used by all ELS/CT cmd */ + csio_ln_prep_ecwr(io_req, wr_size, im_len, sub_op, + ln->nport_id, rn->nport_id, + csio_rn_flowid(rn), + &fw_wr[0]); + + /* Copy ELS/CT WR CMD */ + csio_wr_copy_to_wrp(&fw_wr[0], &wrp, wr_off, + sizeof(struct fw_fcoe_els_ct_wr)); + wr_off += sizeof(struct fw_fcoe_els_ct_wr); + + /* Copy payload to Immediate section of WR */ + if (im_len) + csio_wr_copy_to_wrp(pld->vaddr, &wrp, wr_off, im_len); + else { + /* Program DSGL to dma payload */ + dsgl.cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | + ULPTX_MORE | ULPTX_NSGE(1)); + dsgl.len0 = cpu_to_be32(pld_len); + dsgl.addr0 = cpu_to_be64(pld->paddr); + csio_wr_copy_to_wrp(&dsgl, &wrp, ALIGN(wr_off, 8), + sizeof(struct ulptx_sgl)); + } + + /* Issue work request to xmit ELS/CT req to FW */ + csio_wr_issue(mgmtm->hw, mgmtm->eq_idx, false); + return ret; +} + +/* + * csio_ln_mgmt_submit_req - Submit FCOE Mgmt request. + * @io_req - IO Request + * @io_cbfn - Completion handler. + * @req_type - ELS or CT request type + * @pld - Dma Payload buffer + * @pld_len - Payload len + * + * + * This API used submit managment ELS/CT request. + * This called with hw lock held + * Returns: 0 - on success + * -ENOMEM - on error. + */ +static int +csio_ln_mgmt_submit_req(struct csio_ioreq *io_req, + void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *), + enum fcoe_cmn_type req_type, struct csio_dma_buf *pld, + uint32_t pld_len) +{ + struct csio_hw *hw = csio_lnode_to_hw(io_req->lnode); + struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw); + int rv; + + io_req->io_cbfn = io_cbfn; /* Upper layer callback handler */ + io_req->fw_handle = (uintptr_t) (io_req); + io_req->eq_idx = mgmtm->eq_idx; + io_req->iq_idx = mgmtm->iq_idx; + + rv = csio_ln_mgmt_submit_wr(mgmtm, io_req, req_type, pld, pld_len); + if (rv == 0) { + list_add_tail(&io_req->sm.sm_list, &mgmtm->active_q); + mgmtm->stats.n_active++; + } + return rv; +} + +/* + * csio_ln_fdmi_init - FDMI Init entry point. + * @ln: lnode + */ +static int +csio_ln_fdmi_init(struct csio_lnode *ln) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_dma_buf *dma_buf; + + /* Allocate MGMT request required for FDMI */ + ln->mgmt_req = kzalloc(sizeof(struct csio_ioreq), GFP_KERNEL); + if (!ln->mgmt_req) { + csio_ln_err(ln, "Failed to alloc ioreq for FDMI\n"); + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Allocate Dma buffers for FDMI response Payload */ + dma_buf = &ln->mgmt_req->dma_buf; + dma_buf->len = 2048; + dma_buf->vaddr = pci_alloc_consistent(hw->pdev, dma_buf->len, + &dma_buf->paddr); + if (!dma_buf->vaddr) { + csio_err(hw, "Failed to alloc DMA buffer for FDMI!\n"); + kfree(ln->mgmt_req); + ln->mgmt_req = NULL; + return -ENOMEM; + } + + ln->flags |= CSIO_LNF_FDMI_ENABLE; + return 0; +} + +/* + * csio_ln_fdmi_exit - FDMI exit entry point. + * @ln: lnode + */ +static int +csio_ln_fdmi_exit(struct csio_lnode *ln) +{ + struct csio_dma_buf *dma_buf; + struct csio_hw *hw = csio_lnode_to_hw(ln); + + if (!ln->mgmt_req) + return 0; + + dma_buf = &ln->mgmt_req->dma_buf; + if (dma_buf->vaddr) + pci_free_consistent(hw->pdev, dma_buf->len, dma_buf->vaddr, + dma_buf->paddr); + + kfree(ln->mgmt_req); + return 0; +} + +int +csio_scan_done(struct csio_lnode *ln, unsigned long ticks, + unsigned long time, unsigned long max_scan_ticks, + unsigned long delta_scan_ticks) +{ + int rv = 0; + + if (time >= max_scan_ticks) + return 1; + + if (!ln->tgt_scan_tick) + ln->tgt_scan_tick = ticks; + + if (((ticks - ln->tgt_scan_tick) >= delta_scan_ticks)) { + if (!ln->last_scan_ntgts) + ln->last_scan_ntgts = ln->n_scsi_tgts; + else { + if (ln->last_scan_ntgts == ln->n_scsi_tgts) + return 1; + + ln->last_scan_ntgts = ln->n_scsi_tgts; + } + ln->tgt_scan_tick = ticks; + } + return rv; +} + +/* + * csio_notify_lnodes: + * @hw: HW module + * @note: Notification + * + * Called from the HW SM to fan out notifications to the + * Lnode SM. Since the HW SM is entered with lock held, + * there is no need to hold locks here. + * + */ +void +csio_notify_lnodes(struct csio_hw *hw, enum csio_ln_notify note) +{ + struct list_head *tmp; + struct csio_lnode *ln; + + csio_dbg(hw, "Notifying all nodes of event %d\n", note); + + /* Traverse children lnodes list and send evt */ + list_for_each(tmp, &hw->sln_head) { + ln = (struct csio_lnode *) tmp; + + switch (note) { + case CSIO_LN_NOTIFY_HWREADY: + csio_lnode_start(ln); + break; + + case CSIO_LN_NOTIFY_HWRESET: + case CSIO_LN_NOTIFY_HWREMOVE: + csio_lnode_close(ln); + break; + + case CSIO_LN_NOTIFY_HWSTOP: + csio_lnode_stop(ln); + break; + + default: + break; + + } + } +} + +/* + * csio_disable_lnodes: + * @hw: HW module + * @portid:port id + * @disable: disable/enable flag. + * If disable=1, disables all lnode hosted on given physical port. + * otherwise enables all the lnodes on given phsysical port. + * This routine need to called with hw lock held. + */ +void +csio_disable_lnodes(struct csio_hw *hw, uint8_t portid, bool disable) +{ + struct list_head *tmp; + struct csio_lnode *ln; + + csio_dbg(hw, "Notifying event to all nodes of port:%d\n", portid); + + /* Traverse sibling lnodes list and send evt */ + list_for_each(tmp, &hw->sln_head) { + ln = (struct csio_lnode *) tmp; + if (ln->portid != portid) + continue; + + if (disable) + csio_lnode_stop(ln); + else + csio_lnode_start(ln); + } +} + +/* + * csio_ln_init - Initialize an lnode. + * @ln: lnode + * + */ +static int +csio_ln_init(struct csio_lnode *ln) +{ + int rv = -EINVAL; + struct csio_lnode *rln, *pln; + struct csio_hw *hw = csio_lnode_to_hw(ln); + + csio_init_state(&ln->sm, csio_lns_uninit); + ln->vnp_flowid = CSIO_INVALID_IDX; + ln->fcf_flowid = CSIO_INVALID_IDX; + + if (csio_is_root_ln(ln)) { + + /* This is the lnode used during initialization */ + + ln->fcfinfo = kzalloc(sizeof(struct csio_fcf_info), GFP_KERNEL); + if (!ln->fcfinfo) { + csio_ln_err(ln, "Failed to alloc FCF record\n"); + CSIO_INC_STATS(hw, n_err_nomem); + goto err; + } + + INIT_LIST_HEAD(&ln->fcf_lsthead); + kref_init(&ln->fcfinfo->kref); + + if (csio_fdmi_enable && csio_ln_fdmi_init(ln)) + goto err; + + } else { /* Either a non-root physical or a virtual lnode */ + + /* + * THe rest is common for non-root physical and NPIV lnodes. + * Just get references to all other modules + */ + rln = csio_root_lnode(ln); + + if (csio_is_npiv_ln(ln)) { + /* NPIV */ + pln = csio_parent_lnode(ln); + kref_get(&pln->fcfinfo->kref); + ln->fcfinfo = pln->fcfinfo; + } else { + /* Another non-root physical lnode (FCF) */ + ln->fcfinfo = kzalloc(sizeof(struct csio_fcf_info), + GFP_KERNEL); + if (!ln->fcfinfo) { + csio_ln_err(ln, "Failed to alloc FCF info\n"); + CSIO_INC_STATS(hw, n_err_nomem); + goto err; + } + + kref_init(&ln->fcfinfo->kref); + + if (csio_fdmi_enable && csio_ln_fdmi_init(ln)) + goto err; + } + + } /* if (!csio_is_root_ln(ln)) */ + + return 0; +err: + return rv; +} + +static void +csio_ln_exit(struct csio_lnode *ln) +{ + struct csio_lnode *pln; + + csio_cleanup_rns(ln); + if (csio_is_npiv_ln(ln)) { + pln = csio_parent_lnode(ln); + kref_put(&pln->fcfinfo->kref, csio_free_fcfinfo); + } else { + kref_put(&ln->fcfinfo->kref, csio_free_fcfinfo); + if (csio_fdmi_enable) + csio_ln_fdmi_exit(ln); + } + ln->fcfinfo = NULL; +} + +/** + * csio_lnode_init - Initialize the members of an lnode. + * @ln: lnode + * + */ +int +csio_lnode_init(struct csio_lnode *ln, struct csio_hw *hw, + struct csio_lnode *pln) +{ + int rv = -EINVAL; + + /* Link this lnode to hw */ + csio_lnode_to_hw(ln) = hw; + + /* Link child to parent if child lnode */ + if (pln) + ln->pln = pln; + else + ln->pln = NULL; + + /* Initialize scsi_tgt and timers to zero */ + ln->n_scsi_tgts = 0; + ln->last_scan_ntgts = 0; + ln->tgt_scan_tick = 0; + + /* Initialize rnode list */ + INIT_LIST_HEAD(&ln->rnhead); + INIT_LIST_HEAD(&ln->cln_head); + + /* Initialize log level for debug */ + ln->params.log_level = hw->params.log_level; + + if (csio_ln_init(ln)) + goto err; + + /* Add lnode to list of sibling or children lnodes */ + spin_lock_irq(&hw->lock); + list_add_tail(&ln->sm.sm_list, pln ? &pln->cln_head : &hw->sln_head); + if (pln) + pln->num_vports++; + spin_unlock_irq(&hw->lock); + + hw->num_lns++; + + return 0; +err: + csio_lnode_to_hw(ln) = NULL; + return rv; +} + +/** + * csio_lnode_exit - De-instantiate an lnode. + * @ln: lnode + * + */ +void +csio_lnode_exit(struct csio_lnode *ln) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + + csio_ln_exit(ln); + + /* Remove this lnode from hw->sln_head */ + spin_lock_irq(&hw->lock); + + list_del_init(&ln->sm.sm_list); + + /* If it is children lnode, decrement the + * counter in its parent lnode + */ + if (ln->pln) + ln->pln->num_vports--; + + /* Update root lnode pointer */ + if (list_empty(&hw->sln_head)) + hw->rln = NULL; + else + hw->rln = (struct csio_lnode *)csio_list_next(&hw->sln_head); + + spin_unlock_irq(&hw->lock); + + csio_lnode_to_hw(ln) = NULL; + hw->num_lns--; +} diff --git a/drivers/scsi/csiostor/csio_lnode.h b/drivers/scsi/csiostor/csio_lnode.h new file mode 100644 index 0000000..8d84988 --- /dev/null +++ b/drivers/scsi/csiostor/csio_lnode.h @@ -0,0 +1,255 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_LNODE_H__ +#define __CSIO_LNODE_H__ + +#include <linux/kref.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <scsi/fc/fc_els.h> + + +#include "csio_defs.h" +#include "csio_hw.h" + +#define CSIO_FCOE_MAX_NPIV 128 +#define CSIO_FCOE_MAX_RNODES 2048 + +/* FDMI port attribute unknown speed */ +#define CSIO_HBA_PORTSPEED_UNKNOWN 0x8000 + +extern int csio_fcoe_rnodes; +extern int csio_fdmi_enable; + +/* State machine evets */ +enum csio_ln_ev { + CSIO_LNE_NONE = (uint32_t)0, + CSIO_LNE_LINKUP, + CSIO_LNE_FAB_INIT_DONE, + CSIO_LNE_LINK_DOWN, + CSIO_LNE_DOWN_LINK, + CSIO_LNE_LOGO, + CSIO_LNE_CLOSE, + CSIO_LNE_MAX_EVENT, +}; + + +struct csio_fcf_info { + struct list_head list; + uint8_t priority; + uint8_t mac[6]; + uint8_t name_id[8]; + uint8_t fabric[8]; + uint16_t vf_id; + uint8_t vlan_id; + uint16_t max_fcoe_size; + uint8_t fc_map[3]; + uint32_t fka_adv; + uint32_t fcfi; + uint8_t get_next:1; + uint8_t link_aff:1; + uint8_t fpma:1; + uint8_t spma:1; + uint8_t login:1; + uint8_t portid; + uint8_t spma_mac[6]; + struct kref kref; +}; + +/* Defines for flags */ +#define CSIO_LNF_FIPSUPP 0x00000001 /* Fip Supported */ +#define CSIO_LNF_NPIVSUPP 0x00000002 /* NPIV supported */ +#define CSIO_LNF_LINK_ENABLE 0x00000004 /* Link enabled */ +#define CSIO_LNF_FDMI_ENABLE 0x00000008 /* FDMI support */ + +/* Transport events */ +enum csio_ln_fc_evt { + CSIO_LN_FC_LINKUP = 1, + CSIO_LN_FC_LINKDOWN, + CSIO_LN_FC_RSCN, + CSIO_LN_FC_ATTRIB_UPDATE, +}; + +/* Lnode stats */ +struct csio_lnode_stats { + uint32_t n_link_up; /* Link down */ + uint32_t n_link_down; /* Link up */ + uint32_t n_err; /* error */ + uint32_t n_err_nomem; /* memory not available */ + uint32_t n_inval_parm; /* Invalid parameters */ + uint32_t n_evt_unexp; /* unexpected event */ + uint32_t n_evt_drop; /* dropped event */ + uint32_t n_rnode_match; /* matched rnode */ + uint32_t n_dev_loss_tmo; /* Device loss timeout */ + uint32_t n_fdmi_err; /* fdmi err */ + uint32_t n_evt_fw[RSCN_DEV_LOST]; /* fw events */ + enum csio_ln_ev n_evt_sm[CSIO_LNE_MAX_EVENT]; /* State m/c events */ + uint32_t n_rnode_alloc; /* rnode allocated */ + uint32_t n_rnode_free; /* rnode freed */ + uint32_t n_rnode_nomem; /* rnode alloc failure */ + uint32_t n_input_requests; /* Input Requests */ + uint32_t n_output_requests; /* Output Requests */ + uint32_t n_control_requests; /* Control Requests */ + uint32_t n_input_bytes; /* Input Bytes */ + uint32_t n_output_bytes; /* Output Bytes */ + uint32_t rsvd1; +}; + +/* Common Lnode params */ +struct csio_lnode_params { + uint32_t ra_tov; + uint32_t fcfi; + uint32_t log_level; /* Module level for debugging */ +}; + +struct csio_service_parms { + struct fc_els_csp csp; /* Common service parms */ + uint8_t wwpn[8]; /* WWPN */ + uint8_t wwnn[8]; /* WWNN */ + struct fc_els_cssp clsp[4]; /* Class service params */ + uint8_t vvl[16]; /* Vendor version level */ +}; + +/* Lnode */ +struct csio_lnode { + struct csio_sm sm; /* State machine + sibling + * lnode list. + */ + struct csio_hw *hwp; /* Pointer to the HW module */ + uint8_t portid; /* Port ID */ + uint8_t rsvd1; + uint16_t rsvd2; + uint32_t dev_num; /* Device number */ + uint32_t flags; /* Flags */ + struct list_head fcf_lsthead; /* FCF entries */ + struct csio_fcf_info *fcfinfo; /* FCF in use */ + struct csio_ioreq *mgmt_req; /* MGMT request */ + + /* FCoE identifiers */ + uint8_t mac[6]; + uint32_t nport_id; + struct csio_service_parms ln_sparm; /* Service parms */ + + /* Firmware identifiers */ + uint32_t fcf_flowid; /*fcf flowid */ + uint32_t vnp_flowid; + uint16_t ssn_cnt; /* Registered Session */ + uint8_t cur_evt; /* Current event */ + uint8_t prev_evt; /* Previous event */ + + /* Children */ + struct list_head cln_head; /* Head of the children lnode + * list. + */ + uint32_t num_vports; /* Total NPIV/children LNodes*/ + struct csio_lnode *pln; /* Parent lnode of child + * lnodes. + */ + struct list_head cmpl_q; /* Pending I/Os on this lnode */ + + /* Remote node information */ + struct list_head rnhead; /* Head of rnode list */ + uint32_t num_reg_rnodes; /* Number of rnodes registered + * with the host. + */ + uint32_t n_scsi_tgts; /* Number of scsi targets + * found + */ + uint32_t last_scan_ntgts;/* Number of scsi targets + * found per last scan. + */ + uint32_t tgt_scan_tick; /* timer started after + * new tgt found + */ + /* FC transport data */ + struct fc_vport *fc_vport; + struct fc_host_statistics fch_stats; + + struct csio_lnode_stats stats; /* Common lnode stats */ + struct csio_lnode_params params; /* Common lnode params */ +}; + +#define csio_lnode_to_hw(ln) ((ln)->hwp) +#define csio_root_lnode(ln) (csio_lnode_to_hw((ln))->rln) +#define csio_parent_lnode(ln) ((ln)->pln) +#define csio_ln_flowid(ln) ((ln)->vnp_flowid) +#define csio_ln_wwpn(ln) ((ln)->ln_sparm.wwpn) +#define csio_ln_wwnn(ln) ((ln)->ln_sparm.wwnn) + +#define csio_is_root_ln(ln) (((ln) == csio_root_lnode((ln))) ? 1 : 0) +#define csio_is_phys_ln(ln) (((ln)->pln == NULL) ? 1 : 0) +#define csio_is_npiv_ln(ln) (((ln)->pln != NULL) ? 1 : 0) + + +#define csio_ln_dbg(_ln, _fmt, ...) \ + csio_dbg(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \ + CSIO_DEVID_LO(_ln), ##__VA_ARGS__); + +#define csio_ln_err(_ln, _fmt, ...) \ + csio_err(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \ + CSIO_DEVID_LO(_ln), ##__VA_ARGS__); + +#define csio_ln_warn(_ln, _fmt, ...) \ + csio_warn(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \ + CSIO_DEVID_LO(_ln), ##__VA_ARGS__); + +/* HW->Lnode notifications */ +enum csio_ln_notify { + CSIO_LN_NOTIFY_HWREADY = 1, + CSIO_LN_NOTIFY_HWSTOP, + CSIO_LN_NOTIFY_HWREMOVE, + CSIO_LN_NOTIFY_HWRESET, +}; + +void csio_fcoe_fwevt_handler(struct csio_hw *, __u8 cpl_op, __be64 *); +int csio_is_lnode_ready(struct csio_lnode *); +void csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str); +struct csio_lnode *csio_lnode_lookup_by_wwpn(struct csio_hw *, uint8_t *); +int csio_get_phy_port_stats(struct csio_hw *, uint8_t , + struct fw_fcoe_port_stats *); +int csio_scan_done(struct csio_lnode *, unsigned long, unsigned long, + unsigned long, unsigned long); +void csio_notify_lnodes(struct csio_hw *, enum csio_ln_notify); +void csio_disable_lnodes(struct csio_hw *, uint8_t, bool); +void csio_lnode_async_event(struct csio_lnode *, enum csio_ln_fc_evt); +int csio_ln_fdmi_start(struct csio_lnode *, void *); +int csio_lnode_start(struct csio_lnode *); +void csio_lnode_stop(struct csio_lnode *); +void csio_lnode_close(struct csio_lnode *); +int csio_lnode_init(struct csio_lnode *, struct csio_hw *, + struct csio_lnode *); +void csio_lnode_exit(struct csio_lnode *); + +#endif /* ifndef __CSIO_LNODE_H__ */ diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c new file mode 100644 index 0000000..5b27c48 --- /dev/null +++ b/drivers/scsi/csiostor/csio_mb.c @@ -0,0 +1,1750 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/string.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" +#include "csio_mb.h" +#include "csio_wr.h" + +#define csio_mb_is_host_owner(__owner) ((__owner) == CSIO_MBOWNER_PL) + +/* MB Command/Response Helpers */ +/* + * csio_mb_fw_retval - FW return value from a mailbox response. + * @mbp: Mailbox structure + * + */ +enum fw_retval +csio_mb_fw_retval(struct csio_mb *mbp) +{ + struct fw_cmd_hdr *hdr; + + hdr = (struct fw_cmd_hdr *)(mbp->mb); + + return FW_CMD_RETVAL_GET(ntohl(hdr->lo)); +} + +/* + * csio_mb_hello - FW HELLO command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @m_mbox: Master mailbox number, if any. + * @a_mbox: Mailbox number for asycn notifications. + * @master: Device mastership. + * @cbfn: Callback, if any. + * + */ +void +csio_mb_hello(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + uint32_t m_mbox, uint32_t a_mbox, enum csio_dev_master master, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_hello_cmd *cmdp = (struct fw_hello_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_HELLO_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->err_to_clearinit = htonl( + FW_HELLO_CMD_MASTERDIS(master == CSIO_MASTER_CANT) | + FW_HELLO_CMD_MASTERFORCE(master == CSIO_MASTER_MUST) | + FW_HELLO_CMD_MBMASTER(master == CSIO_MASTER_MUST ? + m_mbox : FW_HELLO_CMD_MBMASTER_MASK) | + FW_HELLO_CMD_MBASYNCNOT(a_mbox) | + FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) | + FW_HELLO_CMD_CLEARINIT); + +} + +/* + * csio_mb_process_hello_rsp - FW HELLO response processing helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @retval: Mailbox return value from Firmware + * @state: State that the function is in. + * @mpfn: Master pfn + * + */ +void +csio_mb_process_hello_rsp(struct csio_hw *hw, struct csio_mb *mbp, + enum fw_retval *retval, enum csio_dev_state *state, + uint8_t *mpfn) +{ + struct fw_hello_cmd *rsp = (struct fw_hello_cmd *)(mbp->mb); + uint32_t value; + + *retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16)); + + if (*retval == FW_SUCCESS) { + hw->fwrev = ntohl(rsp->fwrev); + + value = ntohl(rsp->err_to_clearinit); + *mpfn = FW_HELLO_CMD_MBMASTER_GET(value); + + if (value & FW_HELLO_CMD_INIT) + *state = CSIO_DEV_STATE_INIT; + else if (value & FW_HELLO_CMD_ERR) + *state = CSIO_DEV_STATE_ERR; + else + *state = CSIO_DEV_STATE_UNINIT; + } +} + +/* + * csio_mb_bye - FW BYE command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @cbfn: Callback, if any. + * + */ +void +csio_mb_bye(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_bye_cmd *cmdp = (struct fw_bye_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_BYE_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} + +/* + * csio_mb_reset - FW RESET command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @reset: Type of reset. + * @cbfn: Callback, if any. + * + */ +void +csio_mb_reset(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + int reset, int halt, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_reset_cmd *cmdp = (struct fw_reset_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_RESET_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->val = htonl(reset); + cmdp->halt_pkd = htonl(halt); + +} + +/* + * csio_mb_params - FW PARAMS command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @tmo: Command timeout. + * @pf: PF number. + * @vf: VF number. + * @nparams: Number of paramters + * @params: Parameter mnemonic array. + * @val: Parameter value array. + * @wr: Write/Read PARAMS. + * @cbfn: Callback, if any. + * + */ +void +csio_mb_params(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + unsigned int pf, unsigned int vf, unsigned int nparams, + const u32 *params, u32 *val, bool wr, + void (*cbfn)(struct csio_hw *, struct csio_mb *)) +{ + uint32_t i; + uint32_t temp_params = 0, temp_val = 0; + struct fw_params_cmd *cmdp = (struct fw_params_cmd *)(mbp->mb); + __be32 *p = &cmdp->param[0].mnem; + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | + FW_CMD_REQUEST | + (wr ? FW_CMD_WRITE : FW_CMD_READ) | + FW_PARAMS_CMD_PFN(pf) | + FW_PARAMS_CMD_VFN(vf)); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + /* Write Params */ + if (wr) { + while (nparams--) { + temp_params = *params++; + temp_val = *val++; + + *p++ = htonl(temp_params); + *p++ = htonl(temp_val); + } + } else { + for (i = 0; i < nparams; i++, p += 2) { + temp_params = *params++; + *p = htonl(temp_params); + } + } + +} + +/* + * csio_mb_process_read_params_rsp - FW PARAMS response processing helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @retval: Mailbox return value from Firmware + * @nparams: Number of parameters + * @val: Parameter value array. + * + */ +void +csio_mb_process_read_params_rsp(struct csio_hw *hw, struct csio_mb *mbp, + enum fw_retval *retval, unsigned int nparams, + u32 *val) +{ + struct fw_params_cmd *rsp = (struct fw_params_cmd *)(mbp->mb); + uint32_t i; + __be32 *p = &rsp->param[0].val; + + *retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16)); + + if (*retval == FW_SUCCESS) + for (i = 0; i < nparams; i++, p += 2) + *val++ = ntohl(*p); +} + +/* + * csio_mb_ldst - FW LDST command + * @hw: The HW structure + * @mbp: Mailbox structure + * @tmo: timeout + * @reg: register + * + */ +void +csio_mb_ldst(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, int reg) +{ + struct fw_ldst_cmd *ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb); + CSIO_INIT_MBP(mbp, ldst_cmd, tmo, hw, NULL, 1); + + /* + * Construct and send the Firmware LDST Command to retrieve the + * specified PCI-E Configuration Space register. + */ + ldst_cmd->op_to_addrspace = + htonl(FW_CMD_OP(FW_LDST_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ | + FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FUNC_PCIE)); + ldst_cmd->cycles_to_len16 = htonl(FW_LEN16(struct fw_ldst_cmd)); + ldst_cmd->u.pcie.select_naccess = FW_LDST_CMD_NACCESS(1); + ldst_cmd->u.pcie.ctrl_to_fn = + (FW_LDST_CMD_LC | FW_LDST_CMD_FN(hw->pfn)); + ldst_cmd->u.pcie.r = (uint8_t)reg; +} + +/* + * + * csio_mb_caps_config - FW Read/Write Capabilities command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @wr: Write if 1, Read if 0 + * @init: Turn on initiator mode. + * @tgt: Turn on target mode. + * @cofld: If 1, Control Offload for FCoE + * @cbfn: Callback, if any. + * + * This helper assumes that cmdp has MB payload from a previous CAPS + * read command. + */ +void +csio_mb_caps_config(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + bool wr, bool init, bool tgt, bool cofld, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_caps_config_cmd *cmdp = + (struct fw_caps_config_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, wr ? 0 : 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + (wr ? FW_CMD_WRITE : FW_CMD_READ)); + cmdp->cfvalid_to_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + /* Read config */ + if (!wr) + return; + + /* Write config */ + cmdp->fcoecaps = 0; + + if (cofld) + cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_CTRL_OFLD); + if (init) + cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_INITIATOR); + if (tgt) + cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_TARGET); +} + +void +csio_rss_glb_config(struct csio_hw *hw, struct csio_mb *mbp, + uint32_t tmo, uint8_t mode, unsigned int flags, + void (*cbfn)(struct csio_hw *, struct csio_mb *)) +{ + struct fw_rss_glb_config_cmd *cmdp = + (struct fw_rss_glb_config_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { + cmdp->u.manual.mode_pkd = + htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode)); + } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { + cmdp->u.basicvirtual.mode_pkd = + htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode)); + cmdp->u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags); + } +} + + +/* + * csio_mb_pfvf - FW Write PF/VF capabilities command helper. + * @hw: The HW structure + * @mbp: Mailbox structure + * @pf: + * @vf: + * @txq: + * @txq_eht_ctrl: + * @rxqi: + * @rxq: + * @tc: + * @vi: + * @pmask: + * @rcaps: + * @wxcaps: + * @cbfn: Callback, if any. + * + */ +void +csio_mb_pfvf(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + unsigned int pf, unsigned int vf, unsigned int txq, + unsigned int txq_eth_ctrl, unsigned int rxqi, + unsigned int rxq, unsigned int tc, unsigned int vi, + unsigned int cmask, unsigned int pmask, unsigned int nexactf, + unsigned int rcaps, unsigned int wxcaps, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_pfvf_cmd *cmdp = (struct fw_pfvf_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_PFVF_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_PFVF_CMD_PFN(pf) | + FW_PFVF_CMD_VFN(vf)); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT(rxqi) | + FW_PFVF_CMD_NIQ(rxq)); + + cmdp->type_to_neq = htonl(FW_PFVF_CMD_TYPE | + FW_PFVF_CMD_CMASK(cmask) | + FW_PFVF_CMD_PMASK(pmask) | + FW_PFVF_CMD_NEQ(txq)); + cmdp->tc_to_nexactf = htonl(FW_PFVF_CMD_TC(tc) | + FW_PFVF_CMD_NVI(vi) | + FW_PFVF_CMD_NEXACTF(nexactf)); + cmdp->r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS(rcaps) | + FW_PFVF_CMD_WX_CAPS(wxcaps) | + FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl)); +} + +#define CSIO_ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG) + +/* + * csio_mb_port- FW PORT command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @tmo: COmmand timeout + * @portid: Port ID to get/set info + * @wr: Write/Read PORT information. + * @fc: Flow control + * @caps: Port capabilites to set. + * @cbfn: Callback, if any. + * + */ +void +csio_mb_port(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + uint8_t portid, bool wr, uint32_t fc, uint16_t caps, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_port_cmd *cmdp = (struct fw_port_cmd *)(mbp->mb); + unsigned int lfc = 0, mdi = FW_PORT_MDI(FW_PORT_MDI_AUTO); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | + FW_CMD_REQUEST | + (wr ? FW_CMD_EXEC : FW_CMD_READ) | + FW_PORT_CMD_PORTID(portid)); + if (!wr) { + cmdp->action_to_len16 = htonl( + FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + return; + } + + /* Set port */ + cmdp->action_to_len16 = htonl( + FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + if (fc & PAUSE_RX) + lfc |= FW_PORT_CAP_FC_RX; + if (fc & PAUSE_TX) + lfc |= FW_PORT_CAP_FC_TX; + + if (!(caps & FW_PORT_CAP_ANEG)) + cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) | lfc); + else + cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) | + lfc | mdi); +} + +/* + * csio_mb_process_read_port_rsp - FW PORT command response processing helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @retval: Mailbox return value from Firmware + * @caps: port capabilities + * + */ +void +csio_mb_process_read_port_rsp(struct csio_hw *hw, struct csio_mb *mbp, + enum fw_retval *retval, uint16_t *caps) +{ + struct fw_port_cmd *rsp = (struct fw_port_cmd *)(mbp->mb); + + *retval = FW_CMD_RETVAL_GET(ntohl(rsp->action_to_len16)); + + if (*retval == FW_SUCCESS) + *caps = ntohs(rsp->u.info.pcap); +} + +/* + * csio_mb_initialize - FW INITIALIZE command helper + * @hw: The HW structure + * @mbp: Mailbox structure + * @tmo: COmmand timeout + * @cbfn: Callback, if any. + * + */ +void +csio_mb_initialize(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_initialize_cmd *cmdp = (struct fw_initialize_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1); + + cmdp->op_to_write = htonl(FW_CMD_OP(FW_INITIALIZE_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} + +/* + * csio_mb_iq_alloc - Initializes the mailbox to allocate an + * Ingress DMA queue in the firmware. + * + * @hw: The hw structure + * @mbp: Mailbox structure to initialize + * @priv: Private object + * @mb_tmo: Mailbox time-out period (in ms). + * @iq_params: Ingress queue params needed for allocation. + * @cbfn: The call-back function + * + * + */ +static void +csio_mb_iq_alloc(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, struct csio_iq_params *iq_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | + FW_CMD_REQUEST | FW_CMD_EXEC | + FW_IQ_CMD_PFN(iq_params->pfn) | + FW_IQ_CMD_VFN(iq_params->vfn)); + + cmdp->alloc_to_len16 = htonl(FW_IQ_CMD_ALLOC | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + cmdp->type_to_iqandstindex = htonl( + FW_IQ_CMD_VIID(iq_params->viid) | + FW_IQ_CMD_TYPE(iq_params->type) | + FW_IQ_CMD_IQASYNCH(iq_params->iqasynch)); + + cmdp->fl0size = htons(iq_params->fl0size); + cmdp->fl0size = htons(iq_params->fl1size); + +} /* csio_mb_iq_alloc */ + +/* + * csio_mb_iq_write - Initializes the mailbox for writing into an + * Ingress DMA Queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private object + * @mb_tmo: Mailbox time-out period (in ms). + * @cascaded_req: TRUE - if this request is cascased with iq-alloc request. + * @iq_params: Ingress queue params needed for writing. + * @cbfn: The call-back function + * + * NOTE: We OR relevant bits with cmdp->XXX, instead of just equating, + * because this IQ write request can be cascaded with a previous + * IQ alloc request, and we dont want to over-write the bits set by + * that request. This logic will work even in a non-cascaded case, since the + * cmdp structure is zeroed out by CSIO_INIT_MBP. + */ +static void +csio_mb_iq_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, bool cascaded_req, + struct csio_iq_params *iq_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb); + + uint32_t iq_start_stop = (iq_params->iq_start) ? + FW_IQ_CMD_IQSTART(1) : + FW_IQ_CMD_IQSTOP(1); + + /* + * If this IQ write is cascaded with IQ alloc request, do not + * re-initialize with 0's. + * + */ + if (!cascaded_req) + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + + cmdp->op_to_vfn |= htonl(FW_CMD_OP(FW_IQ_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE | + FW_IQ_CMD_PFN(iq_params->pfn) | + FW_IQ_CMD_VFN(iq_params->vfn)); + cmdp->alloc_to_len16 |= htonl(iq_start_stop | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->iqid |= htons(iq_params->iqid); + cmdp->fl0id |= htons(iq_params->fl0id); + cmdp->fl1id |= htons(iq_params->fl1id); + cmdp->type_to_iqandstindex |= htonl( + FW_IQ_CMD_IQANDST(iq_params->iqandst) | + FW_IQ_CMD_IQANUS(iq_params->iqanus) | + FW_IQ_CMD_IQANUD(iq_params->iqanud) | + FW_IQ_CMD_IQANDSTINDEX(iq_params->iqandstindex)); + cmdp->iqdroprss_to_iqesize |= htons( + FW_IQ_CMD_IQPCIECH(iq_params->iqpciech) | + FW_IQ_CMD_IQDCAEN(iq_params->iqdcaen) | + FW_IQ_CMD_IQDCACPU(iq_params->iqdcacpu) | + FW_IQ_CMD_IQINTCNTTHRESH(iq_params->iqintcntthresh) | + FW_IQ_CMD_IQCPRIO(iq_params->iqcprio) | + FW_IQ_CMD_IQESIZE(iq_params->iqesize)); + + cmdp->iqsize |= htons(iq_params->iqsize); + cmdp->iqaddr |= cpu_to_be64(iq_params->iqaddr); + + if (iq_params->type == 0) { + cmdp->iqns_to_fl0congen |= htonl( + FW_IQ_CMD_IQFLINTIQHSEN(iq_params->iqflintiqhsen)| + FW_IQ_CMD_IQFLINTCONGEN(iq_params->iqflintcongen)); + } + + if (iq_params->fl0size && iq_params->fl0addr && + (iq_params->fl0id != 0xFFFF)) { + + cmdp->iqns_to_fl0congen |= htonl( + FW_IQ_CMD_FL0HOSTFCMODE(iq_params->fl0hostfcmode)| + FW_IQ_CMD_FL0CPRIO(iq_params->fl0cprio) | + FW_IQ_CMD_FL0PADEN(iq_params->fl0paden) | + FW_IQ_CMD_FL0PACKEN(iq_params->fl0packen)); + cmdp->fl0dcaen_to_fl0cidxfthresh |= htons( + FW_IQ_CMD_FL0DCAEN(iq_params->fl0dcaen) | + FW_IQ_CMD_FL0DCACPU(iq_params->fl0dcacpu) | + FW_IQ_CMD_FL0FBMIN(iq_params->fl0fbmin) | + FW_IQ_CMD_FL0FBMAX(iq_params->fl0fbmax) | + FW_IQ_CMD_FL0CIDXFTHRESH(iq_params->fl0cidxfthresh)); + cmdp->fl0size |= htons(iq_params->fl0size); + cmdp->fl0addr |= cpu_to_be64(iq_params->fl0addr); + } +} /* csio_mb_iq_write */ + +/* + * csio_mb_iq_alloc_write - Initializes the mailbox for allocating an + * Ingress DMA Queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data. + * @mb_tmo: Mailbox time-out period (in ms). + * @iq_params: Ingress queue params needed for allocation & writing. + * @cbfn: The call-back function + * + * + */ +void +csio_mb_iq_alloc_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, struct csio_iq_params *iq_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + csio_mb_iq_alloc(hw, mbp, priv, mb_tmo, iq_params, cbfn); + csio_mb_iq_write(hw, mbp, priv, mb_tmo, true, iq_params, cbfn); +} /* csio_mb_iq_alloc_write */ + +/* + * csio_mb_iq_alloc_write_rsp - Process the allocation & writing + * of ingress DMA queue mailbox's response. + * + * @hw: The HW structure. + * @mbp: Mailbox structure to initialize. + * @retval: Firmware return value. + * @iq_params: Ingress queue parameters, after allocation and write. + * + */ +void +csio_mb_iq_alloc_write_rsp(struct csio_hw *hw, struct csio_mb *mbp, + enum fw_retval *ret_val, + struct csio_iq_params *iq_params) +{ + struct fw_iq_cmd *rsp = (struct fw_iq_cmd *)(mbp->mb); + + *ret_val = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)); + if (*ret_val == FW_SUCCESS) { + iq_params->physiqid = ntohs(rsp->physiqid); + iq_params->iqid = ntohs(rsp->iqid); + iq_params->fl0id = ntohs(rsp->fl0id); + iq_params->fl1id = ntohs(rsp->fl1id); + } else { + iq_params->physiqid = iq_params->iqid = + iq_params->fl0id = iq_params->fl1id = 0; + } +} /* csio_mb_iq_alloc_write_rsp */ + +/* + * csio_mb_iq_free - Initializes the mailbox for freeing a + * specified Ingress DMA Queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data + * @mb_tmo: Mailbox time-out period (in ms). + * @iq_params: Parameters of ingress queue, that is to be freed. + * @cbfn: The call-back function + * + * + */ +void +csio_mb_iq_free(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, struct csio_iq_params *iq_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | + FW_CMD_REQUEST | FW_CMD_EXEC | + FW_IQ_CMD_PFN(iq_params->pfn) | + FW_IQ_CMD_VFN(iq_params->vfn)); + cmdp->alloc_to_len16 = htonl(FW_IQ_CMD_FREE | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(iq_params->type)); + + cmdp->iqid = htons(iq_params->iqid); + cmdp->fl0id = htons(iq_params->fl0id); + cmdp->fl1id = htons(iq_params->fl1id); + +} /* csio_mb_iq_free */ + +/* + * csio_mb_eq_ofld_alloc - Initializes the mailbox for allocating + * an offload-egress queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data + * @mb_tmo: Mailbox time-out period (in ms). + * @eq_ofld_params: (Offload) Egress queue paramters. + * @cbfn: The call-back function + * + * + */ +static void +csio_mb_eq_ofld_alloc(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, struct csio_eq_params *eq_ofld_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | + FW_CMD_REQUEST | FW_CMD_EXEC | + FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) | + FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn)); + cmdp->alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_ALLOC | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} /* csio_mb_eq_ofld_alloc */ + +/* + * csio_mb_eq_ofld_write - Initializes the mailbox for writing + * an alloacted offload-egress queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data + * @mb_tmo: Mailbox time-out period (in ms). + * @cascaded_req: TRUE - if this request is cascased with Eq-alloc request. + * @eq_ofld_params: (Offload) Egress queue paramters. + * @cbfn: The call-back function + * + * + * NOTE: We OR relevant bits with cmdp->XXX, instead of just equating, + * because this EQ write request can be cascaded with a previous + * EQ alloc request, and we dont want to over-write the bits set by + * that request. This logic will work even in a non-cascaded case, since the + * cmdp structure is zeroed out by CSIO_INIT_MBP. + */ +static void +csio_mb_eq_ofld_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, bool cascaded_req, + struct csio_eq_params *eq_ofld_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb); + + uint32_t eq_start_stop = (eq_ofld_params->eqstart) ? + FW_EQ_OFLD_CMD_EQSTART : FW_EQ_OFLD_CMD_EQSTOP; + + /* + * If this EQ write is cascaded with EQ alloc request, do not + * re-initialize with 0's. + * + */ + if (!cascaded_req) + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + + cmdp->op_to_vfn |= htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE | + FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) | + FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn)); + cmdp->alloc_to_len16 |= htonl(eq_start_stop | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + cmdp->eqid_pkd |= htonl(FW_EQ_OFLD_CMD_EQID(eq_ofld_params->eqid)); + + cmdp->fetchszm_to_iqid |= htonl( + FW_EQ_OFLD_CMD_HOSTFCMODE(eq_ofld_params->hostfcmode) | + FW_EQ_OFLD_CMD_CPRIO(eq_ofld_params->cprio) | + FW_EQ_OFLD_CMD_PCIECHN(eq_ofld_params->pciechn) | + FW_EQ_OFLD_CMD_IQID(eq_ofld_params->iqid)); + + cmdp->dcaen_to_eqsize |= htonl( + FW_EQ_OFLD_CMD_DCAEN(eq_ofld_params->dcaen) | + FW_EQ_OFLD_CMD_DCACPU(eq_ofld_params->dcacpu) | + FW_EQ_OFLD_CMD_FBMIN(eq_ofld_params->fbmin) | + FW_EQ_OFLD_CMD_FBMAX(eq_ofld_params->fbmax) | + FW_EQ_OFLD_CMD_CIDXFTHRESHO(eq_ofld_params->cidxfthresho) | + FW_EQ_OFLD_CMD_CIDXFTHRESH(eq_ofld_params->cidxfthresh) | + FW_EQ_OFLD_CMD_EQSIZE(eq_ofld_params->eqsize)); + + cmdp->eqaddr |= cpu_to_be64(eq_ofld_params->eqaddr); + +} /* csio_mb_eq_ofld_write */ + +/* + * csio_mb_eq_ofld_alloc_write - Initializes the mailbox for allocation + * writing into an Engress DMA Queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data. + * @mb_tmo: Mailbox time-out period (in ms). + * @eq_ofld_params: (Offload) Egress queue paramters. + * @cbfn: The call-back function + * + * + */ +void +csio_mb_eq_ofld_alloc_write(struct csio_hw *hw, struct csio_mb *mbp, + void *priv, uint32_t mb_tmo, + struct csio_eq_params *eq_ofld_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + csio_mb_eq_ofld_alloc(hw, mbp, priv, mb_tmo, eq_ofld_params, cbfn); + csio_mb_eq_ofld_write(hw, mbp, priv, mb_tmo, true, + eq_ofld_params, cbfn); +} /* csio_mb_eq_ofld_alloc_write */ + +/* + * csio_mb_eq_ofld_alloc_write_rsp - Process the allocation + * & write egress DMA queue mailbox's response. + * + * @hw: The HW structure. + * @mbp: Mailbox structure to initialize. + * @retval: Firmware return value. + * @eq_ofld_params: (Offload) Egress queue paramters. + * + */ +void +csio_mb_eq_ofld_alloc_write_rsp(struct csio_hw *hw, + struct csio_mb *mbp, enum fw_retval *ret_val, + struct csio_eq_params *eq_ofld_params) +{ + struct fw_eq_ofld_cmd *rsp = (struct fw_eq_ofld_cmd *)(mbp->mb); + + *ret_val = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)); + + if (*ret_val == FW_SUCCESS) { + eq_ofld_params->eqid = FW_EQ_OFLD_CMD_EQID_GET( + ntohl(rsp->eqid_pkd)); + eq_ofld_params->physeqid = FW_EQ_OFLD_CMD_PHYSEQID_GET( + ntohl(rsp->physeqid_pkd)); + } else + eq_ofld_params->eqid = 0; + +} /* csio_mb_eq_ofld_alloc_write_rsp */ + +/* + * csio_mb_eq_ofld_free - Initializes the mailbox for freeing a + * specified Engress DMA Queue. + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @priv: Private data area. + * @mb_tmo: Mailbox time-out period (in ms). + * @eq_ofld_params: (Offload) Egress queue paramters, that is to be freed. + * @cbfn: The call-back function + * + * + */ +void +csio_mb_eq_ofld_free(struct csio_hw *hw, struct csio_mb *mbp, void *priv, + uint32_t mb_tmo, struct csio_eq_params *eq_ofld_params, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1); + + cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | + FW_CMD_REQUEST | FW_CMD_EXEC | + FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) | + FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn)); + cmdp->alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID(eq_ofld_params->eqid)); + +} /* csio_mb_eq_ofld_free */ + +/* + * csio_write_fcoe_link_cond_init_mb - Initialize Mailbox to write FCoE link + * condition. + * + * @ln: The Lnode structure + * @mbp: Mailbox structure to initialize + * @mb_tmo: Mailbox time-out period (in ms). + * @cbfn: The call back function. + * + * + */ +void +csio_write_fcoe_link_cond_init_mb(struct csio_lnode *ln, struct csio_mb *mbp, + uint32_t mb_tmo, uint8_t port_id, uint32_t sub_opcode, + uint8_t cos, bool link_status, uint32_t fcfi, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_link_cmd *cmdp = + (struct fw_fcoe_link_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1); + + cmdp->op_to_portid = htonl(( + FW_CMD_OP(FW_FCOE_LINK_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_FCOE_LINK_CMD_PORTID(port_id))); + cmdp->sub_opcode_fcfi = htonl( + FW_FCOE_LINK_CMD_SUB_OPCODE(sub_opcode) | + FW_FCOE_LINK_CMD_FCFI(fcfi)); + cmdp->lstatus = link_status; + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} /* csio_write_fcoe_link_cond_init_mb */ + +/* + * csio_fcoe_read_res_info_init_mb - Initializes the mailbox for reading FCoE + * resource information(FW_GET_RES_INFO_CMD). + * + * @hw: The HW structure + * @mbp: Mailbox structure to initialize + * @mb_tmo: Mailbox time-out period (in ms). + * @cbfn: The call-back function + * + * + */ +void +csio_fcoe_read_res_info_init_mb(struct csio_hw *hw, struct csio_mb *mbp, + uint32_t mb_tmo, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_res_info_cmd *cmdp = + (struct fw_fcoe_res_info_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, hw, cbfn, 1); + + cmdp->op_to_read = htonl((FW_CMD_OP(FW_FCOE_RES_INFO_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ)); + + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} /* csio_fcoe_read_res_info_init_mb */ + +/* + * csio_fcoe_vnp_alloc_init_mb - Initializes the mailbox for allocating VNP + * in the firmware (FW_FCOE_VNP_CMD). + * + * @ln: The Lnode structure. + * @mbp: Mailbox structure to initialize. + * @mb_tmo: Mailbox time-out period (in ms). + * @fcfi: FCF Index. + * @vnpi: vnpi + * @iqid: iqid + * @vnport_wwnn: vnport WWNN + * @vnport_wwpn: vnport WWPN + * @cbfn: The call-back function. + * + * + */ +void +csio_fcoe_vnp_alloc_init_mb(struct csio_lnode *ln, struct csio_mb *mbp, + uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi, uint16_t iqid, + uint8_t vnport_wwnn[8], uint8_t vnport_wwpn[8], + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_vnp_cmd *cmdp = + (struct fw_fcoe_vnp_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1); + + cmdp->op_to_fcfi = htonl((FW_CMD_OP(FW_FCOE_VNP_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC | + FW_FCOE_VNP_CMD_FCFI(fcfi))); + + cmdp->alloc_to_len16 = htonl(FW_FCOE_VNP_CMD_ALLOC | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + + cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi)); + + cmdp->iqid = htons(iqid); + + if (!wwn_to_u64(vnport_wwnn) && !wwn_to_u64(vnport_wwpn)) + cmdp->gen_wwn_to_vnpi |= htonl(FW_FCOE_VNP_CMD_GEN_WWN); + + if (vnport_wwnn) + memcpy(cmdp->vnport_wwnn, vnport_wwnn, 8); + if (vnport_wwpn) + memcpy(cmdp->vnport_wwpn, vnport_wwpn, 8); + +} /* csio_fcoe_vnp_alloc_init_mb */ + +/* + * csio_fcoe_vnp_read_init_mb - Prepares VNP read cmd. + * @ln: The Lnode structure. + * @mbp: Mailbox structure to initialize. + * @mb_tmo: Mailbox time-out period (in ms). + * @fcfi: FCF Index. + * @vnpi: vnpi + * @cbfn: The call-back handler. + */ +void +csio_fcoe_vnp_read_init_mb(struct csio_lnode *ln, struct csio_mb *mbp, + uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_vnp_cmd *cmdp = + (struct fw_fcoe_vnp_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1); + cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_VNP_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ | + FW_FCOE_VNP_CMD_FCFI(fcfi)); + cmdp->alloc_to_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi)); +} + +/* + * csio_fcoe_vnp_free_init_mb - Initializes the mailbox for freeing an + * alloacted VNP in the firmware (FW_FCOE_VNP_CMD). + * + * @ln: The Lnode structure. + * @mbp: Mailbox structure to initialize. + * @mb_tmo: Mailbox time-out period (in ms). + * @fcfi: FCF flow id + * @vnpi: VNP flow id + * @cbfn: The call-back function. + * Return: None + */ +void +csio_fcoe_vnp_free_init_mb(struct csio_lnode *ln, struct csio_mb *mbp, + uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_vnp_cmd *cmdp = + (struct fw_fcoe_vnp_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1); + + cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_VNP_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC | + FW_FCOE_VNP_CMD_FCFI(fcfi)); + cmdp->alloc_to_len16 = htonl(FW_FCOE_VNP_CMD_FREE | + FW_CMD_LEN16(sizeof(*cmdp) / 16)); + cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi)); +} + +/* + * csio_fcoe_read_fcf_init_mb - Initializes the mailbox to read the + * FCF records. + * + * @ln: The Lnode structure + * @mbp: Mailbox structure to initialize + * @mb_tmo: Mailbox time-out period (in ms). + * @fcf_params: FC-Forwarder parameters. + * @cbfn: The call-back function + * + * + */ +void +csio_fcoe_read_fcf_init_mb(struct csio_lnode *ln, struct csio_mb *mbp, + uint32_t mb_tmo, uint32_t portid, uint32_t fcfi, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct fw_fcoe_fcf_cmd *cmdp = + (struct fw_fcoe_fcf_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1); + + cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_FCF_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ | + FW_FCOE_FCF_CMD_FCFI(fcfi)); + cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16)); + +} /* csio_fcoe_read_fcf_init_mb */ + +void +csio_fcoe_read_portparams_init_mb(struct csio_hw *hw, struct csio_mb *mbp, + uint32_t mb_tmo, + struct fw_fcoe_port_cmd_params *portparams, + void (*cbfn)(struct csio_hw *, + struct csio_mb *)) +{ + struct fw_fcoe_stats_cmd *cmdp = (struct fw_fcoe_stats_cmd *)(mbp->mb); + + CSIO_INIT_MBP(mbp, cmdp, mb_tmo, hw, cbfn, 1); + mbp->mb_size = 64; + + cmdp->op_to_flowid = htonl(FW_CMD_OP(FW_FCOE_STATS_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + cmdp->free_to_len16 = htonl(FW_CMD_LEN16(CSIO_MAX_MB_SIZE/16)); + + cmdp->u.ctl.nstats_port = FW_FCOE_STATS_CMD_NSTATS(portparams->nstats) | + FW_FCOE_STATS_CMD_PORT(portparams->portid); + + cmdp->u.ctl.port_valid_ix = FW_FCOE_STATS_CMD_IX(portparams->idx) | + FW_FCOE_STATS_CMD_PORT_VALID; + +} /* csio_fcoe_read_portparams_init_mb */ + +void +csio_mb_process_portparams_rsp(struct csio_hw *hw, + struct csio_mb *mbp, + enum fw_retval *retval, + struct fw_fcoe_port_cmd_params *portparams, + struct fw_fcoe_port_stats *portstats) +{ + struct fw_fcoe_stats_cmd *rsp = (struct fw_fcoe_stats_cmd *)(mbp->mb); + struct fw_fcoe_port_stats stats; + uint8_t *src; + uint8_t *dst; + + *retval = FW_CMD_RETVAL_GET(ntohl(rsp->free_to_len16)); + + memset(&stats, 0, sizeof(struct fw_fcoe_port_stats)); + + if (*retval == FW_SUCCESS) { + dst = (uint8_t *)(&stats) + ((portparams->idx - 1) * 8); + src = (uint8_t *)rsp + (CSIO_STATS_OFFSET * 8); + memcpy(dst, src, (portparams->nstats * 8)); + if (portparams->idx == 1) { + /* Get the first 6 flits from the Mailbox */ + portstats->tx_bcast_bytes = stats.tx_bcast_bytes; + portstats->tx_bcast_frames = stats.tx_bcast_frames; + portstats->tx_mcast_bytes = stats.tx_mcast_bytes; + portstats->tx_mcast_frames = stats.tx_mcast_frames; + portstats->tx_ucast_bytes = stats.tx_ucast_bytes; + portstats->tx_ucast_frames = stats.tx_ucast_frames; + } + if (portparams->idx == 7) { + /* Get the second 6 flits from the Mailbox */ + portstats->tx_drop_frames = stats.tx_drop_frames; + portstats->tx_offload_bytes = stats.tx_offload_bytes; + portstats->tx_offload_frames = stats.tx_offload_frames; +#if 0 + portstats->rx_pf_bytes = stats.rx_pf_bytes; + portstats->rx_pf_frames = stats.rx_pf_frames; +#endif + portstats->rx_bcast_bytes = stats.rx_bcast_bytes; + portstats->rx_bcast_frames = stats.rx_bcast_frames; + portstats->rx_mcast_bytes = stats.rx_mcast_bytes; + } + if (portparams->idx == 13) { + /* Get the last 4 flits from the Mailbox */ + portstats->rx_mcast_frames = stats.rx_mcast_frames; + portstats->rx_ucast_bytes = stats.rx_ucast_bytes; + portstats->rx_ucast_frames = stats.rx_ucast_frames; + portstats->rx_err_frames = stats.rx_err_frames; + } + } +} + +/* Entry points/APIs for MB module */ +/* + * csio_mb_intr_enable - Enable Interrupts from mailboxes. + * @hw: The HW structure + * + * Enables CIM interrupt bit in appropriate INT_ENABLE registers. + */ +void +csio_mb_intr_enable(struct csio_hw *hw) +{ + csio_wr_reg32(hw, MBMSGRDYINTEN(1), MYPF_REG(CIM_PF_HOST_INT_ENABLE)); + csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_ENABLE)); +} + +/* + * csio_mb_intr_disable - Disable Interrupts from mailboxes. + * @hw: The HW structure + * + * Disable bit in HostInterruptEnable CIM register. + */ +void +csio_mb_intr_disable(struct csio_hw *hw) +{ + csio_wr_reg32(hw, MBMSGRDYINTEN(0), MYPF_REG(CIM_PF_HOST_INT_ENABLE)); + csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_ENABLE)); +} + +static void +csio_mb_dump_fw_dbg(struct csio_hw *hw, __be64 *cmd) +{ + struct fw_debug_cmd *dbg = (struct fw_debug_cmd *)cmd; + + if ((FW_DEBUG_CMD_TYPE_GET(ntohl(dbg->op_type))) == 1) { + csio_info(hw, "FW print message:\n"); + csio_info(hw, "\tdebug->dprtstridx = %d\n", + ntohs(dbg->u.prt.dprtstridx)); + csio_info(hw, "\tdebug->dprtstrparam0 = 0x%x\n", + ntohl(dbg->u.prt.dprtstrparam0)); + csio_info(hw, "\tdebug->dprtstrparam1 = 0x%x\n", + ntohl(dbg->u.prt.dprtstrparam1)); + csio_info(hw, "\tdebug->dprtstrparam2 = 0x%x\n", + ntohl(dbg->u.prt.dprtstrparam2)); + csio_info(hw, "\tdebug->dprtstrparam3 = 0x%x\n", + ntohl(dbg->u.prt.dprtstrparam3)); + } else { + /* This is a FW assertion */ + csio_fatal(hw, "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", + dbg->u.assert.filename_0_7, + ntohl(dbg->u.assert.line), + ntohl(dbg->u.assert.x), + ntohl(dbg->u.assert.y)); + } +} + +static void +csio_mb_debug_cmd_handler(struct csio_hw *hw) +{ + int i; + __be64 cmd[CSIO_MB_MAX_REGS]; + uint32_t ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL); + uint32_t data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA); + int size = sizeof(struct fw_debug_cmd); + + /* Copy mailbox data */ + for (i = 0; i < size; i += 8) + cmd[i / 8] = cpu_to_be64(csio_rd_reg64(hw, data_reg + i)); + + csio_mb_dump_fw_dbg(hw, cmd); + + /* Notify FW of mailbox by setting owner as UP */ + csio_wr_reg32(hw, MBMSGVALID | MBINTREQ | MBOWNER(CSIO_MBOWNER_FW), + ctl_reg); + + csio_rd_reg32(hw, ctl_reg); + wmb(); +} + +/* + * csio_mb_issue - generic routine for issuing Mailbox commands. + * @hw: The HW structure + * @mbp: Mailbox command to issue + * + * Caller should hold hw lock across this call. + */ +int +csio_mb_issue(struct csio_hw *hw, struct csio_mb *mbp) +{ + uint32_t owner, ctl; + int i; + uint32_t ii; + __be64 *cmd = mbp->mb; + __be64 hdr; + struct csio_mbm *mbm = &hw->mbm; + uint32_t ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL); + uint32_t data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA); + int size = mbp->mb_size; + int rv = -EINVAL; + struct fw_cmd_hdr *fw_hdr; + + /* Determine mode */ + if (mbp->mb_cbfn == NULL) { + /* Need to issue/get results in the same context */ + if (mbp->tmo < CSIO_MB_POLL_FREQ) { + csio_err(hw, "Invalid tmo: 0x%x\n", mbp->tmo); + goto error_out; + } + } else if (!csio_is_host_intr_enabled(hw) || + !csio_is_hw_intr_enabled(hw)) { + csio_err(hw, "Cannot issue mailbox in interrupt mode 0x%x\n", + *((uint8_t *)mbp->mb)); + goto error_out; + } + + if (mbm->mcurrent != NULL) { + /* Queue mbox cmd, if another mbox cmd is active */ + if (mbp->mb_cbfn == NULL) { + rv = -EBUSY; + csio_dbg(hw, "Couldnt own Mailbox %x op:0x%x\n", + hw->pfn, *((uint8_t *)mbp->mb)); + + goto error_out; + } else { + list_add_tail(&mbp->list, &mbm->req_q); + CSIO_INC_STATS(mbm, n_activeq); + + return 0; + } + } + + /* Now get ownership of mailbox */ + owner = MBOWNER_GET(csio_rd_reg32(hw, ctl_reg)); + + if (!csio_mb_is_host_owner(owner)) { + + for (i = 0; (owner == CSIO_MBOWNER_NONE) && (i < 3); i++) + owner = MBOWNER_GET(csio_rd_reg32(hw, ctl_reg)); + /* + * Mailbox unavailable. In immediate mode, fail the command. + * In other modes, enqueue the request. + */ + if (!csio_mb_is_host_owner(owner)) { + if (mbp->mb_cbfn == NULL) { + rv = owner ? -EBUSY : -ETIMEDOUT; + + csio_dbg(hw, + "Couldnt own Mailbox %x op:0x%x " + "owner:%x\n", + hw->pfn, *((uint8_t *)mbp->mb), owner); + goto error_out; + } else { + if (mbm->mcurrent == NULL) { + csio_err(hw, + "Couldnt own Mailbox %x " + "op:0x%x owner:%x\n", + hw->pfn, *((uint8_t *)mbp->mb), + owner); + csio_err(hw, + "No outstanding driver" + " mailbox as well\n"); + goto error_out; + } + } + } + } + + /* Mailbox is available, copy mailbox data into it */ + for (i = 0; i < size; i += 8) { + csio_wr_reg64(hw, be64_to_cpu(*cmd), data_reg + i); + cmd++; + } + + CSIO_DUMP_MB(hw, hw->pfn, data_reg); + + /* Start completion timers in non-immediate modes and notify FW */ + if (mbp->mb_cbfn != NULL) { + mbm->mcurrent = mbp; + mod_timer(&mbm->timer, jiffies + msecs_to_jiffies(mbp->tmo)); + csio_wr_reg32(hw, MBMSGVALID | MBINTREQ | + MBOWNER(CSIO_MBOWNER_FW), ctl_reg); + } else + csio_wr_reg32(hw, MBMSGVALID | MBOWNER(CSIO_MBOWNER_FW), + ctl_reg); + + /* Flush posted writes */ + csio_rd_reg32(hw, ctl_reg); + wmb(); + + CSIO_INC_STATS(mbm, n_req); + + if (mbp->mb_cbfn) + return 0; + + /* Poll for completion in immediate mode */ + cmd = mbp->mb; + + for (ii = 0; ii < mbp->tmo; ii += CSIO_MB_POLL_FREQ) { + mdelay(CSIO_MB_POLL_FREQ); + + /* Check for response */ + ctl = csio_rd_reg32(hw, ctl_reg); + if (csio_mb_is_host_owner(MBOWNER_GET(ctl))) { + + if (!(ctl & MBMSGVALID)) { + csio_wr_reg32(hw, 0, ctl_reg); + continue; + } + + CSIO_DUMP_MB(hw, hw->pfn, data_reg); + + hdr = cpu_to_be64(csio_rd_reg64(hw, data_reg)); + fw_hdr = (struct fw_cmd_hdr *)&hdr; + + switch (FW_CMD_OP_GET(ntohl(fw_hdr->hi))) { + case FW_DEBUG_CMD: + csio_mb_debug_cmd_handler(hw); + continue; + } + + /* Copy response */ + for (i = 0; i < size; i += 8) + *cmd++ = cpu_to_be64(csio_rd_reg64 + (hw, data_reg + i)); + csio_wr_reg32(hw, 0, ctl_reg); + + if (csio_mb_fw_retval(mbp) != FW_SUCCESS) + CSIO_INC_STATS(mbm, n_err); + + CSIO_INC_STATS(mbm, n_rsp); + return 0; + } + } + + CSIO_INC_STATS(mbm, n_tmo); + + csio_err(hw, "Mailbox %x op:0x%x timed out!\n", + hw->pfn, *((uint8_t *)cmd)); + + return -ETIMEDOUT; + +error_out: + CSIO_INC_STATS(mbm, n_err); + return rv; +} + +/* + * csio_mb_completions - Completion handler for Mailbox commands + * @hw: The HW structure + * @cbfn_q: Completion queue. + * + */ +void +csio_mb_completions(struct csio_hw *hw, struct list_head *cbfn_q) +{ + struct csio_mb *mbp; + struct csio_mbm *mbm = &hw->mbm; + enum fw_retval rv; + + while (!list_empty(cbfn_q)) { + mbp = list_first_entry(cbfn_q, struct csio_mb, list); + list_del_init(&mbp->list); + + rv = csio_mb_fw_retval(mbp); + if ((rv != FW_SUCCESS) && (rv != FW_HOSTERROR)) + CSIO_INC_STATS(mbm, n_err); + else if (rv != FW_HOSTERROR) + CSIO_INC_STATS(mbm, n_rsp); + + if (mbp->mb_cbfn) + mbp->mb_cbfn(hw, mbp); + } +} + +static void +csio_mb_portmod_changed(struct csio_hw *hw, uint8_t port_id) +{ + static char *mod_str[] = { + NULL, "LR", "SR", "ER", "TWINAX", "active TWINAX", "LRM" + }; + + struct csio_pport *port = &hw->pport[port_id]; + + if (port->mod_type == FW_PORT_MOD_TYPE_NONE) + csio_info(hw, "Port:%d - port module unplugged\n", port_id); + else if (port->mod_type < ARRAY_SIZE(mod_str)) + csio_info(hw, "Port:%d - %s port module inserted\n", port_id, + mod_str[port->mod_type]); + else if (port->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) + csio_info(hw, + "Port:%d - unsupported optical port module " + "inserted\n", port_id); + else if (port->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) + csio_info(hw, + "Port:%d - unknown port module inserted, forcing " + "TWINAX\n", port_id); + else if (port->mod_type == FW_PORT_MOD_TYPE_ERROR) + csio_info(hw, "Port:%d - transceiver module error\n", port_id); + else + csio_info(hw, "Port:%d - unknown module type %d inserted\n", + port_id, port->mod_type); +} + +int +csio_mb_fwevt_handler(struct csio_hw *hw, __be64 *cmd) +{ + uint8_t opcode = *(uint8_t *)cmd; + struct fw_port_cmd *pcmd; + uint8_t port_id; + uint32_t link_status; + uint16_t action; + uint8_t mod_type; + + if (opcode == FW_PORT_CMD) { + pcmd = (struct fw_port_cmd *)cmd; + port_id = FW_PORT_CMD_PORTID_GET( + ntohl(pcmd->op_to_portid)); + action = FW_PORT_CMD_ACTION_GET( + ntohl(pcmd->action_to_len16)); + if (action != FW_PORT_ACTION_GET_PORT_INFO) { + csio_err(hw, "Unhandled FW_PORT_CMD action: %u\n", + action); + return -EINVAL; + } + + link_status = ntohl(pcmd->u.info.lstatus_to_modtype); + mod_type = FW_PORT_CMD_MODTYPE_GET(link_status); + + hw->pport[port_id].link_status = + FW_PORT_CMD_LSTATUS_GET(link_status); + hw->pport[port_id].link_speed = + FW_PORT_CMD_LSPEED_GET(link_status); + + csio_info(hw, "Port:%x - LINK %s\n", port_id, + FW_PORT_CMD_LSTATUS_GET(link_status) ? "UP" : "DOWN"); + + if (mod_type != hw->pport[port_id].mod_type) { + hw->pport[port_id].mod_type = mod_type; + csio_mb_portmod_changed(hw, port_id); + } + } else if (opcode == FW_DEBUG_CMD) { + csio_mb_dump_fw_dbg(hw, cmd); + } else { + csio_dbg(hw, "Gen MB can't handle op:0x%x on evtq.\n", opcode); + return -EINVAL; + } + + return 0; +} + +/* + * csio_mb_isr_handler - Handle mailboxes related interrupts. + * @hw: The HW structure + * + * Called from the ISR to handle Mailbox related interrupts. + * HW Lock should be held across this call. + */ +int +csio_mb_isr_handler(struct csio_hw *hw) +{ + struct csio_mbm *mbm = &hw->mbm; + struct csio_mb *mbp = mbm->mcurrent; + __be64 *cmd; + uint32_t ctl, cim_cause, pl_cause; + int i; + uint32_t ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL); + uint32_t data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA); + int size; + __be64 hdr; + struct fw_cmd_hdr *fw_hdr; + + pl_cause = csio_rd_reg32(hw, MYPF_REG(PL_PF_INT_CAUSE)); + cim_cause = csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_CAUSE)); + + if (!(pl_cause & PFCIM) || !(cim_cause & MBMSGRDYINT)) { + CSIO_INC_STATS(hw, n_mbint_unexp); + return -EINVAL; + } + + /* + * The cause registers below HAVE to be cleared in the SAME + * order as below: The low level cause register followed by + * the upper level cause register. In other words, CIM-cause + * first followed by PL-Cause next. + */ + csio_wr_reg32(hw, MBMSGRDYINT, MYPF_REG(CIM_PF_HOST_INT_CAUSE)); + csio_wr_reg32(hw, PFCIM, MYPF_REG(PL_PF_INT_CAUSE)); + + ctl = csio_rd_reg32(hw, ctl_reg); + + if (csio_mb_is_host_owner(MBOWNER_GET(ctl))) { + + CSIO_DUMP_MB(hw, hw->pfn, data_reg); + + if (!(ctl & MBMSGVALID)) { + csio_warn(hw, + "Stray mailbox interrupt recvd," + " mailbox data not valid\n"); + csio_wr_reg32(hw, 0, ctl_reg); + /* Flush */ + csio_rd_reg32(hw, ctl_reg); + return -EINVAL; + } + + hdr = cpu_to_be64(csio_rd_reg64(hw, data_reg)); + fw_hdr = (struct fw_cmd_hdr *)&hdr; + + switch (FW_CMD_OP_GET(ntohl(fw_hdr->hi))) { + case FW_DEBUG_CMD: + csio_mb_debug_cmd_handler(hw); + return -EINVAL; +#if 0 + case FW_ERROR_CMD: + case FW_INITIALIZE_CMD: /* When we are not master */ +#endif + } + + CSIO_ASSERT(mbp != NULL); + + cmd = mbp->mb; + size = mbp->mb_size; + /* Get response */ + for (i = 0; i < size; i += 8) + *cmd++ = cpu_to_be64(csio_rd_reg64 + (hw, data_reg + i)); + + csio_wr_reg32(hw, 0, ctl_reg); + /* Flush */ + csio_rd_reg32(hw, ctl_reg); + + mbm->mcurrent = NULL; + + /* Add completion to tail of cbfn queue */ + list_add_tail(&mbp->list, &mbm->cbfn_q); + CSIO_INC_STATS(mbm, n_cbfnq); + + /* + * Enqueue event to EventQ. Events processing happens + * in Event worker thread context + */ + if (csio_enqueue_evt(hw, CSIO_EVT_MBX, mbp, sizeof(mbp))) + CSIO_INC_STATS(hw, n_evt_drop); + + return 0; + + } else { + /* + * We can get here if mailbox MSIX vector is shared, + * or in INTx case. Or a stray interrupt. + */ + csio_dbg(hw, "Host not owner, no mailbox interrupt\n"); + CSIO_INC_STATS(hw, n_int_stray); + return -EINVAL; + } +} + +/* + * csio_mb_tmo_handler - Timeout handler + * @hw: The HW structure + * + */ +struct csio_mb * +csio_mb_tmo_handler(struct csio_hw *hw) +{ + struct csio_mbm *mbm = &hw->mbm; + struct csio_mb *mbp = mbm->mcurrent; + struct fw_cmd_hdr *fw_hdr; + + /* + * Could be a race b/w the completion handler and the timer + * and the completion handler won that race. + */ + if (mbp == NULL) { + CSIO_DB_ASSERT(0); + return NULL; + } + + fw_hdr = (struct fw_cmd_hdr *)(mbp->mb); + + csio_dbg(hw, "Mailbox num:%x op:0x%x timed out\n", hw->pfn, + FW_CMD_OP_GET(ntohl(fw_hdr->hi))); + + mbm->mcurrent = NULL; + CSIO_INC_STATS(mbm, n_tmo); + fw_hdr->lo = htonl(FW_CMD_RETVAL(FW_ETIMEDOUT)); + + return mbp; +} + +/* + * csio_mb_cancel_all - Cancel all waiting commands. + * @hw: The HW structure + * @cbfn_q: The callback queue. + * + * Caller should hold hw lock across this call. + */ +void +csio_mb_cancel_all(struct csio_hw *hw, struct list_head *cbfn_q) +{ + struct csio_mb *mbp; + struct csio_mbm *mbm = &hw->mbm; + struct fw_cmd_hdr *hdr; + struct list_head *tmp; + + if (mbm->mcurrent) { + mbp = mbm->mcurrent; + + /* Stop mailbox completion timer */ + del_timer_sync(&mbm->timer); + + /* Add completion to tail of cbfn queue */ + list_add_tail(&mbp->list, cbfn_q); + mbm->mcurrent = NULL; + } + + if (!list_empty(&mbm->req_q)) { + list_splice_tail_init(&mbm->req_q, cbfn_q); + mbm->stats.n_activeq = 0; + } + + if (!list_empty(&mbm->cbfn_q)) { + list_splice_tail_init(&mbm->cbfn_q, cbfn_q); + mbm->stats.n_cbfnq = 0; + } + + if (list_empty(cbfn_q)) + return; + + list_for_each(tmp, cbfn_q) { + mbp = (struct csio_mb *)tmp; + hdr = (struct fw_cmd_hdr *)(mbp->mb); + + csio_dbg(hw, "Cancelling pending mailbox num %x op:%x\n", + hw->pfn, FW_CMD_OP_GET(ntohl(hdr->hi))); + + CSIO_INC_STATS(mbm, n_cancel); + hdr->lo = htonl(FW_CMD_RETVAL(FW_HOSTERROR)); + } +} + +/* + * csio_mbm_init - Initialize Mailbox module + * @mbm: Mailbox module + * @hw: The HW structure + * @timer: Timing function for interrupting mailboxes + * + * Initialize timer and the request/response queues. + */ +int +csio_mbm_init(struct csio_mbm *mbm, struct csio_hw *hw, + void (*timer_fn)(uintptr_t)) +{ + struct timer_list *timer = &mbm->timer; + + init_timer(timer); + timer->function = timer_fn; + timer->data = (unsigned long)hw; + + INIT_LIST_HEAD(&mbm->req_q); + INIT_LIST_HEAD(&mbm->cbfn_q); + csio_set_mb_intr_idx(mbm, -1); + + return 0; +} + +/* + * csio_mbm_exit - Uninitialize mailbox module + * @mbm: Mailbox module + * + * Stop timer. + */ +void +csio_mbm_exit(struct csio_mbm *mbm) +{ + del_timer_sync(&mbm->timer); + + CSIO_DB_ASSERT(mbm->mcurrent == NULL); + CSIO_DB_ASSERT(list_empty(&mbm->req_q)); + CSIO_DB_ASSERT(list_empty(&mbm->cbfn_q)); +} diff --git a/drivers/scsi/csiostor/csio_mb.h b/drivers/scsi/csiostor/csio_mb.h new file mode 100644 index 0000000..1788ea5 --- /dev/null +++ b/drivers/scsi/csiostor/csio_mb.h @@ -0,0 +1,278 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_MB_H__ +#define __CSIO_MB_H__ + +#include <linux/timer.h> +#include <linux/completion.h> + +#include "t4fw_api.h" +#include "t4fw_api_stor.h" +#include "csio_defs.h" + +#define CSIO_STATS_OFFSET (2) +#define CSIO_NUM_STATS_PER_MB (6) + +struct fw_fcoe_port_cmd_params { + uint8_t portid; + uint8_t idx; + uint8_t nstats; +}; + +#define CSIO_DUMP_MB(__hw, __num, __mb) \ + csio_dbg(__hw, "\t%llx %llx %llx %llx %llx %llx %llx %llx\n", \ + (unsigned long long)csio_rd_reg64(__hw, __mb), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 8), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 16), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 24), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 32), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 40), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 48), \ + (unsigned long long)csio_rd_reg64(__hw, __mb + 56)) + +#define CSIO_MB_MAX_REGS 8 +#define CSIO_MAX_MB_SIZE 64 +#define CSIO_MB_POLL_FREQ 5 /* 5 ms */ +#define CSIO_MB_DEFAULT_TMO FW_CMD_MAX_TIMEOUT + +/* Device master in HELLO command */ +enum csio_dev_master { CSIO_MASTER_CANT, CSIO_MASTER_MAY, CSIO_MASTER_MUST }; + +enum csio_mb_owner { CSIO_MBOWNER_NONE, CSIO_MBOWNER_FW, CSIO_MBOWNER_PL }; + +enum csio_dev_state { + CSIO_DEV_STATE_UNINIT, + CSIO_DEV_STATE_INIT, + CSIO_DEV_STATE_ERR +}; + +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + +#define FW_PARAM_PFVF(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)| \ + FW_PARAMS_PARAM_Y(0) | \ + FW_PARAMS_PARAM_Z(0)) + +enum { + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 +}; + +#define CSIO_INIT_MBP(__mbp, __cp, __tmo, __priv, __fn, __clear) \ +do { \ + if (__clear) \ + memset((__cp), 0, \ + CSIO_MB_MAX_REGS * sizeof(__be64)); \ + INIT_LIST_HEAD(&(__mbp)->list); \ + (__mbp)->tmo = (__tmo); \ + (__mbp)->priv = (void *)(__priv); \ + (__mbp)->mb_cbfn = (__fn); \ + (__mbp)->mb_size = sizeof(*(__cp)); \ +} while (0) + +struct csio_mbm_stats { + uint32_t n_req; /* number of mbox req */ + uint32_t n_rsp; /* number of mbox rsp */ + uint32_t n_activeq; /* number of mbox req active Q */ + uint32_t n_cbfnq; /* number of mbox req cbfn Q */ + uint32_t n_tmo; /* number of mbox timeout */ + uint32_t n_cancel; /* number of mbox cancel */ + uint32_t n_err; /* number of mbox error */ +}; + +/* Driver version of Mailbox */ +struct csio_mb { + struct list_head list; /* for req/resp */ + /* queue in driver */ + __be64 mb[CSIO_MB_MAX_REGS]; /* MB in HW format */ + int mb_size; /* Size of this + * mailbox. + */ + uint32_t tmo; /* Timeout */ + struct completion cmplobj; /* MB Completion + * object + */ + void (*mb_cbfn) (struct csio_hw *, struct csio_mb *); + /* Callback fn */ + void *priv; /* Owner private ptr */ +}; + +struct csio_mbm { + uint32_t a_mbox; /* Async mbox num */ + uint32_t intr_idx; /* Interrupt index */ + struct timer_list timer; /* Mbox timer */ + struct list_head req_q; /* Mbox request queue */ + struct list_head cbfn_q; /* Mbox completion q */ + struct csio_mb *mcurrent; /* Current mailbox */ + uint32_t req_q_cnt; /* Outstanding mbox + * cmds + */ + struct csio_mbm_stats stats; /* Statistics */ +}; + +#define csio_set_mb_intr_idx(_m, _i) ((_m)->intr_idx = (_i)) +#define csio_get_mb_intr_idx(_m) ((_m)->intr_idx) + +struct csio_iq_params; +struct csio_eq_params; + +enum fw_retval csio_mb_fw_retval(struct csio_mb *); + +/* MB helpers */ +void csio_mb_hello(struct csio_hw *, struct csio_mb *, uint32_t, + uint32_t, uint32_t, enum csio_dev_master, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_process_hello_rsp(struct csio_hw *, struct csio_mb *, + enum fw_retval *, enum csio_dev_state *, + uint8_t *); + +void csio_mb_bye(struct csio_hw *, struct csio_mb *, uint32_t, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_reset(struct csio_hw *, struct csio_mb *, uint32_t, int, int, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_params(struct csio_hw *, struct csio_mb *, uint32_t, unsigned int, + unsigned int, unsigned int, const u32 *, u32 *, bool, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_process_read_params_rsp(struct csio_hw *, struct csio_mb *, + enum fw_retval *, unsigned int , u32 *); + +void csio_mb_ldst(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, + int reg); + +void csio_mb_caps_config(struct csio_hw *, struct csio_mb *, uint32_t, + bool, bool, bool, bool, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_rss_glb_config(struct csio_hw *, struct csio_mb *, + uint32_t, uint8_t, unsigned int, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_pfvf(struct csio_hw *, struct csio_mb *, uint32_t, + unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, + unsigned int, void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_mb_port(struct csio_hw *, struct csio_mb *, uint32_t, + uint8_t, bool, uint32_t, uint16_t, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_mb_process_read_port_rsp(struct csio_hw *, struct csio_mb *, + enum fw_retval *, uint16_t *); + +void csio_mb_initialize(struct csio_hw *, struct csio_mb *, uint32_t, + void (*)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_iq_alloc_write(struct csio_hw *, struct csio_mb *, void *, + uint32_t, struct csio_iq_params *, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_mb_iq_alloc_write_rsp(struct csio_hw *, struct csio_mb *, + enum fw_retval *, struct csio_iq_params *); + +void csio_mb_iq_free(struct csio_hw *, struct csio_mb *, void *, + uint32_t, struct csio_iq_params *, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_mb_eq_ofld_alloc_write(struct csio_hw *, struct csio_mb *, void *, + uint32_t, struct csio_eq_params *, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_mb_eq_ofld_alloc_write_rsp(struct csio_hw *, struct csio_mb *, + enum fw_retval *, struct csio_eq_params *); + +void csio_mb_eq_ofld_free(struct csio_hw *, struct csio_mb *, void *, + uint32_t , struct csio_eq_params *, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_read_res_info_init_mb(struct csio_hw *, struct csio_mb *, + uint32_t, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_write_fcoe_link_cond_init_mb(struct csio_lnode *, struct csio_mb *, + uint32_t, uint8_t, uint32_t, uint8_t, bool, uint32_t, + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_vnp_alloc_init_mb(struct csio_lnode *, struct csio_mb *, + uint32_t, uint32_t , uint32_t , uint16_t, + uint8_t [8], uint8_t [8], + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_vnp_read_init_mb(struct csio_lnode *, struct csio_mb *, + uint32_t, uint32_t , uint32_t , + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_vnp_free_init_mb(struct csio_lnode *, struct csio_mb *, + uint32_t , uint32_t, uint32_t , + void (*) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_read_fcf_init_mb(struct csio_lnode *, struct csio_mb *, + uint32_t, uint32_t, uint32_t, + void (*cbfn) (struct csio_hw *, struct csio_mb *)); + +void csio_fcoe_read_portparams_init_mb(struct csio_hw *hw, + struct csio_mb *mbp, uint32_t mb_tmo, + struct fw_fcoe_port_cmd_params *portparams, + void (*cbfn)(struct csio_hw *, struct csio_mb *)); + +void csio_mb_process_portparams_rsp(struct csio_hw *hw, struct csio_mb *mbp, + enum fw_retval *retval, + struct fw_fcoe_port_cmd_params *portparams, + struct fw_fcoe_port_stats *portstats); + +/* MB module functions */ +int csio_mbm_init(struct csio_mbm *, struct csio_hw *, + void (*)(uintptr_t)); +void csio_mbm_exit(struct csio_mbm *); +void csio_mb_intr_enable(struct csio_hw *); +void csio_mb_intr_disable(struct csio_hw *); + +int csio_mb_issue(struct csio_hw *, struct csio_mb *); +void csio_mb_completions(struct csio_hw *, struct list_head *); +int csio_mb_fwevt_handler(struct csio_hw *, __be64 *); +int csio_mb_isr_handler(struct csio_hw *); +struct csio_mb *csio_mb_tmo_handler(struct csio_hw *); +void csio_mb_cancel_all(struct csio_hw *, struct list_head *); + +#endif /* ifndef __CSIO_MB_H__ */ diff --git a/drivers/scsi/csiostor/csio_rnode.c b/drivers/scsi/csiostor/csio_rnode.c new file mode 100644 index 0000000..51c6a38 --- /dev/null +++ b/drivers/scsi/csiostor/csio_rnode.c @@ -0,0 +1,913 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/string.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> +#include <scsi/fc/fc_els.h> +#include <scsi/fc/fc_fs.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" + +static int csio_rnode_init(struct csio_rnode *, struct csio_lnode *); +static void csio_rnode_exit(struct csio_rnode *); + +/* Static machine forward declarations */ +static void csio_rns_uninit(struct csio_rnode *, enum csio_rn_ev); +static void csio_rns_ready(struct csio_rnode *, enum csio_rn_ev); +static void csio_rns_offline(struct csio_rnode *, enum csio_rn_ev); +static void csio_rns_disappeared(struct csio_rnode *, enum csio_rn_ev); + +/* RNF event mapping */ +static enum csio_rn_ev fwevt_to_rnevt[] = { + CSIO_RNFE_NONE, /* None */ + CSIO_RNFE_LOGGED_IN, /* PLOGI_ACC_RCVD */ + CSIO_RNFE_NONE, /* PLOGI_RJT_RCVD */ + CSIO_RNFE_PLOGI_RECV, /* PLOGI_RCVD */ + CSIO_RNFE_LOGO_RECV, /* PLOGO_RCVD */ + CSIO_RNFE_PRLI_DONE, /* PRLI_ACC_RCVD */ + CSIO_RNFE_NONE, /* PRLI_RJT_RCVD */ + CSIO_RNFE_PRLI_RECV, /* PRLI_RCVD */ + CSIO_RNFE_PRLO_RECV, /* PRLO_RCVD */ + CSIO_RNFE_NONE, /* NPORT_ID_CHGD */ + CSIO_RNFE_LOGO_RECV, /* FLOGO_RCVD */ + CSIO_RNFE_NONE, /* CLR_VIRT_LNK_RCVD */ + CSIO_RNFE_LOGGED_IN, /* FLOGI_ACC_RCVD */ + CSIO_RNFE_NONE, /* FLOGI_RJT_RCVD */ + CSIO_RNFE_LOGGED_IN, /* FDISC_ACC_RCVD */ + CSIO_RNFE_NONE, /* FDISC_RJT_RCVD */ + CSIO_RNFE_NONE, /* FLOGI_TMO_MAX_RETRY */ + CSIO_RNFE_NONE, /* IMPL_LOGO_ADISC_ACC */ + CSIO_RNFE_NONE, /* IMPL_LOGO_ADISC_RJT */ + CSIO_RNFE_NONE, /* IMPL_LOGO_ADISC_CNFLT */ + CSIO_RNFE_NONE, /* PRLI_TMO */ + CSIO_RNFE_NONE, /* ADISC_TMO */ + CSIO_RNFE_NAME_MISSING, /* RSCN_DEV_LOST */ + CSIO_RNFE_NONE, /* SCR_ACC_RCVD */ + CSIO_RNFE_NONE, /* ADISC_RJT_RCVD */ + CSIO_RNFE_NONE, /* LOGO_SNT */ + CSIO_RNFE_LOGO_RECV, /* PROTO_ERR_IMPL_LOGO */ +}; + +#define CSIO_FWE_TO_RNFE(_evt) ((_evt > PROTO_ERR_IMPL_LOGO) ? \ + CSIO_RNFE_NONE : \ + fwevt_to_rnevt[_evt]) +int +csio_is_rnode_ready(struct csio_rnode *rn) +{ + return csio_match_state(rn, csio_rns_ready); +} + +static int +csio_is_rnode_uninit(struct csio_rnode *rn) +{ + return csio_match_state(rn, csio_rns_uninit); +} + +static int +csio_is_rnode_wka(uint8_t rport_type) +{ + if ((rport_type == FLOGI_VFPORT) || + (rport_type == FDISC_VFPORT) || + (rport_type == NS_VNPORT) || + (rport_type == FDMI_VNPORT)) + return 1; + + return 0; +} + +/* + * csio_rn_lookup - Finds the rnode with the given flowid + * @ln - lnode + * @flowid - flowid. + * + * Does the rnode lookup on the given lnode and flowid.If no matching entry + * found, NULL is returned. + */ +static struct csio_rnode * +csio_rn_lookup(struct csio_lnode *ln, uint32_t flowid) +{ + struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead; + struct list_head *tmp; + struct csio_rnode *rn; + + list_for_each(tmp, &rnhead->sm.sm_list) { + rn = (struct csio_rnode *) tmp; + if (rn->flowid == flowid) + return rn; + } + + return NULL; +} + +/* + * csio_rn_lookup_wwpn - Finds the rnode with the given wwpn + * @ln: lnode + * @wwpn: wwpn + * + * Does the rnode lookup on the given lnode and wwpn. If no matching entry + * found, NULL is returned. + */ +static struct csio_rnode * +csio_rn_lookup_wwpn(struct csio_lnode *ln, uint8_t *wwpn) +{ + struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead; + struct list_head *tmp; + struct csio_rnode *rn; + + list_for_each(tmp, &rnhead->sm.sm_list) { + rn = (struct csio_rnode *) tmp; + if (!memcmp(csio_rn_wwpn(rn), wwpn, 8)) + return rn; + } + + return NULL; +} + +/** + * csio_rnode_lookup_portid - Finds the rnode with the given portid + * @ln: lnode + * @portid: port id + * + * Lookup the rnode list for a given portid. If no matching entry + * found, NULL is returned. + */ +struct csio_rnode * +csio_rnode_lookup_portid(struct csio_lnode *ln, uint32_t portid) +{ + struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead; + struct list_head *tmp; + struct csio_rnode *rn; + + list_for_each(tmp, &rnhead->sm.sm_list) { + rn = (struct csio_rnode *) tmp; + if (rn->nport_id == portid) + return rn; + } + + return NULL; +} + +static int +csio_rn_dup_flowid(struct csio_lnode *ln, uint32_t rdev_flowid, + uint32_t *vnp_flowid) +{ + struct csio_rnode *rnhead; + struct list_head *tmp, *tmp1; + struct csio_rnode *rn; + struct csio_lnode *ln_tmp; + struct csio_hw *hw = csio_lnode_to_hw(ln); + + list_for_each(tmp1, &hw->sln_head) { + ln_tmp = (struct csio_lnode *) tmp1; + if (ln_tmp == ln) + continue; + + rnhead = (struct csio_rnode *)&ln_tmp->rnhead; + list_for_each(tmp, &rnhead->sm.sm_list) { + + rn = (struct csio_rnode *) tmp; + if (csio_is_rnode_ready(rn)) { + if (rn->flowid == rdev_flowid) { + *vnp_flowid = csio_ln_flowid(ln_tmp); + return 1; + } + } + } + } + + return 0; +} + +static struct csio_rnode * +csio_alloc_rnode(struct csio_lnode *ln) +{ + struct csio_hw *hw = csio_lnode_to_hw(ln); + + struct csio_rnode *rn = mempool_alloc(hw->rnode_mempool, GFP_ATOMIC); + if (!rn) + goto err; + + memset(rn, 0, sizeof(struct csio_rnode)); + if (csio_rnode_init(rn, ln)) + goto err_free; + + CSIO_INC_STATS(ln, n_rnode_alloc); + + return rn; + +err_free: + mempool_free(rn, hw->rnode_mempool); +err: + CSIO_INC_STATS(ln, n_rnode_nomem); + return NULL; +} + +static void +csio_free_rnode(struct csio_rnode *rn) +{ + struct csio_hw *hw = csio_lnode_to_hw(csio_rnode_to_lnode(rn)); + + csio_rnode_exit(rn); + CSIO_INC_STATS(rn->lnp, n_rnode_free); + mempool_free(rn, hw->rnode_mempool); +} + +/* + * csio_get_rnode - Gets rnode with the given flowid + * @ln - lnode + * @flowid - flow id. + * + * Does the rnode lookup on the given lnode and flowid. If no matching + * rnode found, then new rnode with given npid is allocated and returned. + */ +static struct csio_rnode * +csio_get_rnode(struct csio_lnode *ln, uint32_t flowid) +{ + struct csio_rnode *rn; + + rn = csio_rn_lookup(ln, flowid); + if (!rn) { + rn = csio_alloc_rnode(ln); + if (!rn) + return NULL; + + rn->flowid = flowid; + } + + return rn; +} + +/* + * csio_put_rnode - Frees the given rnode + * @ln - lnode + * @flowid - flow id. + * + * Does the rnode lookup on the given lnode and flowid. If no matching + * rnode found, then new rnode with given npid is allocated and returned. + */ +void +csio_put_rnode(struct csio_lnode *ln, struct csio_rnode *rn) +{ + CSIO_DB_ASSERT(csio_is_rnode_uninit(rn) != 0); + csio_free_rnode(rn); +} + +/* + * csio_confirm_rnode - confirms rnode based on wwpn. + * @ln: lnode + * @rdev_flowid: remote device flowid + * @rdevp: remote device params + * This routines searches other rnode in list having same wwpn of new rnode. + * If there is a match, then matched rnode is returned and otherwise new rnode + * is returned. + * returns rnode. + */ +struct csio_rnode * +csio_confirm_rnode(struct csio_lnode *ln, uint32_t rdev_flowid, + struct fcoe_rdev_entry *rdevp) +{ + uint8_t rport_type; + struct csio_rnode *rn, *match_rn; + uint32_t vnp_flowid; + __be32 *port_id; + + port_id = (__be32 *)&rdevp->r_id[0]; + rport_type = + FW_RDEV_WR_RPORT_TYPE_GET(rdevp->rd_xfer_rdy_to_rport_type); + + /* Drop rdev event for cntrl port */ + if (rport_type == FAB_CTLR_VNPORT) { + csio_ln_dbg(ln, + "Unhandled rport_type:%d recv in rdev evt " + "ssni:x%x\n", rport_type, rdev_flowid); + return NULL; + } + + /* Lookup on flowid */ + rn = csio_rn_lookup(ln, rdev_flowid); + if (!rn) { + + /* Drop events with duplicate flowid */ + if (csio_rn_dup_flowid(ln, rdev_flowid, &vnp_flowid)) { + csio_ln_warn(ln, + "ssni:%x already active on vnpi:%x", + rdev_flowid, vnp_flowid); + return NULL; + } + + /* Lookup on wwpn for NPORTs */ + rn = csio_rn_lookup_wwpn(ln, rdevp->wwpn); + if (!rn) + goto alloc_rnode; + + } else { + /* Lookup well-known ports with nport id */ + if (csio_is_rnode_wka(rport_type)) { + match_rn = csio_rnode_lookup_portid(ln, + ((ntohl(*port_id) >> 8) & CSIO_DID_MASK)); + if (match_rn == NULL) { + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + goto alloc_rnode; + } + + /* + * Now compare the wwpn to confirm that + * same port relogged in. If so update the matched rn. + * Else, go ahead and alloc a new rnode. + */ + if (!memcmp(csio_rn_wwpn(match_rn), rdevp->wwpn, 8)) { + if (csio_is_rnode_ready(rn)) { + csio_ln_warn(ln, + "rnode is already" + "active ssni:x%x\n", + rdev_flowid); + CSIO_ASSERT(0); + } + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + rn = match_rn; + + /* Update rn */ + goto found_rnode; + } + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + goto alloc_rnode; + } + + /* wwpn match */ + if (!memcmp(csio_rn_wwpn(rn), rdevp->wwpn, 8)) + goto found_rnode; + + /* Search for rnode that have same wwpn */ + match_rn = csio_rn_lookup_wwpn(ln, rdevp->wwpn); + if (match_rn != NULL) { + csio_ln_dbg(ln, + "ssni:x%x changed for rport name(wwpn):%llx " + "did:x%x\n", rdev_flowid, + wwn_to_u64(rdevp->wwpn), + match_rn->nport_id); + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + rn = match_rn; + } else { + csio_ln_dbg(ln, + "rnode wwpn mismatch found ssni:x%x " + "name(wwpn):%llx\n", + rdev_flowid, + wwn_to_u64(csio_rn_wwpn(rn))); + if (csio_is_rnode_ready(rn)) { + csio_ln_warn(ln, + "rnode is already active " + "wwpn:%llx ssni:x%x\n", + wwn_to_u64(csio_rn_wwpn(rn)), + rdev_flowid); + CSIO_ASSERT(0); + } + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + goto alloc_rnode; + } + } + +found_rnode: + csio_ln_dbg(ln, "found rnode:%p ssni:x%x name(wwpn):%llx\n", + rn, rdev_flowid, wwn_to_u64(rdevp->wwpn)); + + /* Update flowid */ + csio_rn_flowid(rn) = rdev_flowid; + + /* update rdev entry */ + rn->rdev_entry = rdevp; + CSIO_INC_STATS(ln, n_rnode_match); + return rn; + +alloc_rnode: + rn = csio_get_rnode(ln, rdev_flowid); + if (!rn) + return NULL; + + csio_ln_dbg(ln, "alloc rnode:%p ssni:x%x name(wwpn):%llx\n", + rn, rdev_flowid, wwn_to_u64(rdevp->wwpn)); + + /* update rdev entry */ + rn->rdev_entry = rdevp; + return rn; +} + +/* + * csio_rn_verify_rparams - verify rparams. + * @ln: lnode + * @rn: rnode + * @rdevp: remote device params + * returns success if rparams are verified. + */ +static int +csio_rn_verify_rparams(struct csio_lnode *ln, struct csio_rnode *rn, + struct fcoe_rdev_entry *rdevp) +{ + uint8_t null[8]; + uint8_t rport_type; + uint8_t fc_class; + __be32 *did; + + did = (__be32 *) &rdevp->r_id[0]; + rport_type = + FW_RDEV_WR_RPORT_TYPE_GET(rdevp->rd_xfer_rdy_to_rport_type); + switch (rport_type) { + case FLOGI_VFPORT: + rn->role = CSIO_RNFR_FABRIC; + if (((ntohl(*did) >> 8) & CSIO_DID_MASK) != FC_FID_FLOGI) { + csio_ln_err(ln, "ssni:x%x invalid fabric portid\n", + csio_rn_flowid(rn)); + return -EINVAL; + } + /* NPIV support */ + if (FW_RDEV_WR_NPIV_GET(rdevp->vft_to_qos)) + ln->flags |= CSIO_LNF_NPIVSUPP; + + break; + + case NS_VNPORT: + rn->role = CSIO_RNFR_NS; + if (((ntohl(*did) >> 8) & CSIO_DID_MASK) != FC_FID_DIR_SERV) { + csio_ln_err(ln, "ssni:x%x invalid fabric portid\n", + csio_rn_flowid(rn)); + return -EINVAL; + } + break; + + case REG_FC4_VNPORT: + case REG_VNPORT: + rn->role = CSIO_RNFR_NPORT; + if (rdevp->event_cause == PRLI_ACC_RCVD || + rdevp->event_cause == PRLI_RCVD) { + if (FW_RDEV_WR_TASK_RETRY_ID_GET( + rdevp->enh_disc_to_tgt)) + rn->fcp_flags |= FCP_SPPF_OVLY_ALLOW; + + if (FW_RDEV_WR_RETRY_GET(rdevp->enh_disc_to_tgt)) + rn->fcp_flags |= FCP_SPPF_RETRY; + + if (FW_RDEV_WR_CONF_CMPL_GET(rdevp->enh_disc_to_tgt)) + rn->fcp_flags |= FCP_SPPF_CONF_COMPL; + + if (FW_RDEV_WR_TGT_GET(rdevp->enh_disc_to_tgt)) + rn->role |= CSIO_RNFR_TARGET; + + if (FW_RDEV_WR_INI_GET(rdevp->enh_disc_to_tgt)) + rn->role |= CSIO_RNFR_INITIATOR; + } + + break; + + case FDMI_VNPORT: + case FAB_CTLR_VNPORT: + rn->role = 0; + break; + + default: + csio_ln_err(ln, "ssni:x%x invalid rport type recv x%x\n", + csio_rn_flowid(rn), rport_type); + return -EINVAL; + } + + /* validate wwpn/wwnn for Name server/remote port */ + if (rport_type == REG_VNPORT || rport_type == NS_VNPORT) { + memset(null, 0, 8); + if (!memcmp(rdevp->wwnn, null, 8)) { + csio_ln_err(ln, + "ssni:x%x invalid wwnn received from" + " rport did:x%x\n", + csio_rn_flowid(rn), + (ntohl(*did) & CSIO_DID_MASK)); + return -EINVAL; + } + + if (!memcmp(rdevp->wwpn, null, 8)) { + csio_ln_err(ln, + "ssni:x%x invalid wwpn received from" + " rport did:x%x\n", + csio_rn_flowid(rn), + (ntohl(*did) & CSIO_DID_MASK)); + return -EINVAL; + } + + } + + /* Copy wwnn, wwpn and nport id */ + rn->nport_id = (ntohl(*did) >> 8) & CSIO_DID_MASK; + memcpy(csio_rn_wwnn(rn), rdevp->wwnn, 8); + memcpy(csio_rn_wwpn(rn), rdevp->wwpn, 8); + rn->rn_sparm.csp.sp_bb_data = rdevp->rcv_fr_sz; + fc_class = FW_RDEV_WR_CLASS_GET(rdevp->vft_to_qos); + rn->rn_sparm.clsp[fc_class - 1].cp_class = htons(FC_CPC_VALID); + + return 0; +} + +static void +__csio_reg_rnode(struct csio_rnode *rn) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + spin_unlock_irq(&hw->lock); + csio_reg_rnode(rn); + spin_lock_irq(&hw->lock); + + if (rn->role & CSIO_RNFR_TARGET) + ln->n_scsi_tgts++; + + if (rn->nport_id == FC_FID_MGMT_SERV) + csio_ln_fdmi_start(ln, (void *) rn); +} + +static void +__csio_unreg_rnode(struct csio_rnode *rn) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + struct csio_hw *hw = csio_lnode_to_hw(ln); + LIST_HEAD(tmp_q); + int cmpl = 0; + + if (!list_empty(&rn->host_cmpl_q)) { + csio_dbg(hw, "Returning completion queue I/Os\n"); + list_splice_tail_init(&rn->host_cmpl_q, &tmp_q); + cmpl = 1; + } + + if (rn->role & CSIO_RNFR_TARGET) { + ln->n_scsi_tgts--; + ln->last_scan_ntgts--; + } + + spin_unlock_irq(&hw->lock); + csio_unreg_rnode(rn); + spin_lock_irq(&hw->lock); + + /* Cleanup I/Os that were waiting for rnode to unregister */ + if (cmpl) + csio_scsi_cleanup_io_q(csio_hw_to_scsim(hw), &tmp_q); + +} + +/*****************************************************************************/ +/* START: Rnode SM */ +/*****************************************************************************/ + +/* + * csio_rns_uninit - + * @rn - rnode + * @evt - SM event. + * + */ +static void +csio_rns_uninit(struct csio_rnode *rn, enum csio_rn_ev evt) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + int ret = 0; + + CSIO_INC_STATS(rn, n_evt_sm[evt]); + + switch (evt) { + case CSIO_RNFE_LOGGED_IN: + case CSIO_RNFE_PLOGI_RECV: + ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry); + if (!ret) { + csio_set_state(&rn->sm, csio_rns_ready); + __csio_reg_rnode(rn); + } else { + CSIO_INC_STATS(rn, n_err_inval); + } + break; + case CSIO_RNFE_LOGO_RECV: + csio_ln_dbg(ln, + "ssni:x%x Ignoring event %d recv " + "in rn state[uninit]\n", csio_rn_flowid(rn), evt); + CSIO_INC_STATS(rn, n_evt_drop); + break; + default: + csio_ln_dbg(ln, + "ssni:x%x unexp event %d recv " + "in rn state[uninit]\n", csio_rn_flowid(rn), evt); + CSIO_INC_STATS(rn, n_evt_unexp); + break; + } +} + +/* + * csio_rns_ready - + * @rn - rnode + * @evt - SM event. + * + */ +static void +csio_rns_ready(struct csio_rnode *rn, enum csio_rn_ev evt) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + int ret = 0; + + CSIO_INC_STATS(rn, n_evt_sm[evt]); + + switch (evt) { + case CSIO_RNFE_LOGGED_IN: + case CSIO_RNFE_PLOGI_RECV: + csio_ln_dbg(ln, + "ssni:x%x Ignoring event %d recv from did:x%x " + "in rn state[ready]\n", csio_rn_flowid(rn), evt, + rn->nport_id); + CSIO_INC_STATS(rn, n_evt_drop); + break; + + case CSIO_RNFE_PRLI_DONE: + case CSIO_RNFE_PRLI_RECV: + ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry); + if (!ret) + __csio_reg_rnode(rn); + else + CSIO_INC_STATS(rn, n_err_inval); + + break; + case CSIO_RNFE_DOWN: + csio_set_state(&rn->sm, csio_rns_offline); + __csio_unreg_rnode(rn); + + /* FW expected to internally aborted outstanding SCSI WRs + * and return all SCSI WRs to host with status "ABORTED". + */ + break; + + case CSIO_RNFE_LOGO_RECV: + csio_set_state(&rn->sm, csio_rns_offline); + + __csio_unreg_rnode(rn); + + /* FW expected to internally aborted outstanding SCSI WRs + * and return all SCSI WRs to host with status "ABORTED". + */ + break; + + case CSIO_RNFE_CLOSE: + /* + * Each rnode receives CLOSE event when driver is removed or + * device is reset + * Note: All outstanding IOs on remote port need to returned + * to uppper layer with appropriate error before sending + * CLOSE event + */ + csio_set_state(&rn->sm, csio_rns_uninit); + __csio_unreg_rnode(rn); + break; + + case CSIO_RNFE_NAME_MISSING: + csio_set_state(&rn->sm, csio_rns_disappeared); + __csio_unreg_rnode(rn); + + /* + * FW expected to internally aborted outstanding SCSI WRs + * and return all SCSI WRs to host with status "ABORTED". + */ + + break; + + default: + csio_ln_dbg(ln, + "ssni:x%x unexp event %d recv from did:x%x " + "in rn state[uninit]\n", csio_rn_flowid(rn), evt, + rn->nport_id); + CSIO_INC_STATS(rn, n_evt_unexp); + break; + } +} + +/* + * csio_rns_offline - + * @rn - rnode + * @evt - SM event. + * + */ +static void +csio_rns_offline(struct csio_rnode *rn, enum csio_rn_ev evt) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + int ret = 0; + + CSIO_INC_STATS(rn, n_evt_sm[evt]); + + switch (evt) { + case CSIO_RNFE_LOGGED_IN: + case CSIO_RNFE_PLOGI_RECV: + ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry); + if (!ret) { + csio_set_state(&rn->sm, csio_rns_ready); + __csio_reg_rnode(rn); + } else { + CSIO_INC_STATS(rn, n_err_inval); + csio_post_event(&rn->sm, CSIO_RNFE_CLOSE); + } + break; + + case CSIO_RNFE_DOWN: + csio_ln_dbg(ln, + "ssni:x%x Ignoring event %d recv from did:x%x " + "in rn state[offline]\n", csio_rn_flowid(rn), evt, + rn->nport_id); + CSIO_INC_STATS(rn, n_evt_drop); + break; + + case CSIO_RNFE_CLOSE: + /* Each rnode receives CLOSE event when driver is removed or + * device is reset + * Note: All outstanding IOs on remote port need to returned + * to uppper layer with appropriate error before sending + * CLOSE event + */ + csio_set_state(&rn->sm, csio_rns_uninit); + break; + + case CSIO_RNFE_NAME_MISSING: + csio_set_state(&rn->sm, csio_rns_disappeared); + break; + + default: + csio_ln_dbg(ln, + "ssni:x%x unexp event %d recv from did:x%x " + "in rn state[offline]\n", csio_rn_flowid(rn), evt, + rn->nport_id); + CSIO_INC_STATS(rn, n_evt_unexp); + break; + } +} + +/* + * csio_rns_disappeared - + * @rn - rnode + * @evt - SM event. + * + */ +static void +csio_rns_disappeared(struct csio_rnode *rn, enum csio_rn_ev evt) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + int ret = 0; + + CSIO_INC_STATS(rn, n_evt_sm[evt]); + + switch (evt) { + case CSIO_RNFE_LOGGED_IN: + case CSIO_RNFE_PLOGI_RECV: + ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry); + if (!ret) { + csio_set_state(&rn->sm, csio_rns_ready); + __csio_reg_rnode(rn); + } else { + CSIO_INC_STATS(rn, n_err_inval); + csio_post_event(&rn->sm, CSIO_RNFE_CLOSE); + } + break; + + case CSIO_RNFE_CLOSE: + /* Each rnode receives CLOSE event when driver is removed or + * device is reset. + * Note: All outstanding IOs on remote port need to returned + * to uppper layer with appropriate error before sending + * CLOSE event + */ + csio_set_state(&rn->sm, csio_rns_uninit); + break; + + case CSIO_RNFE_DOWN: + case CSIO_RNFE_NAME_MISSING: + csio_ln_dbg(ln, + "ssni:x%x Ignoring event %d recv from did x%x" + "in rn state[disappeared]\n", csio_rn_flowid(rn), + evt, rn->nport_id); + break; + + default: + csio_ln_dbg(ln, + "ssni:x%x unexp event %d recv from did x%x" + "in rn state[disappeared]\n", csio_rn_flowid(rn), + evt, rn->nport_id); + CSIO_INC_STATS(rn, n_evt_unexp); + break; + } +} + +/*****************************************************************************/ +/* END: Rnode SM */ +/*****************************************************************************/ + +/* + * csio_rnode_devloss_handler - Device loss event handler + * @rn: rnode + * + * Post event to close rnode SM and free rnode. + */ +void +csio_rnode_devloss_handler(struct csio_rnode *rn) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + + /* ignore if same rnode came back as online */ + if (csio_is_rnode_ready(rn)) + return; + + csio_post_event(&rn->sm, CSIO_RNFE_CLOSE); + + /* Free rn if in uninit state */ + if (csio_is_rnode_uninit(rn)) + csio_put_rnode(ln, rn); +} + +/** + * csio_rnode_fwevt_handler - Event handler for firmware rnode events. + * @rn: rnode + * + */ +void +csio_rnode_fwevt_handler(struct csio_rnode *rn, uint8_t fwevt) +{ + struct csio_lnode *ln = csio_rnode_to_lnode(rn); + enum csio_rn_ev evt; + + evt = CSIO_FWE_TO_RNFE(fwevt); + if (!evt) { + csio_ln_err(ln, "ssni:x%x Unhandled FW Rdev event: %d\n", + csio_rn_flowid(rn), fwevt); + CSIO_INC_STATS(rn, n_evt_unexp); + return; + } + CSIO_INC_STATS(rn, n_evt_fw[fwevt]); + + /* Track previous & current events for debugging */ + rn->prev_evt = rn->cur_evt; + rn->cur_evt = fwevt; + + /* Post event to rnode SM */ + csio_post_event(&rn->sm, evt); + + /* Free rn if in uninit state */ + if (csio_is_rnode_uninit(rn)) + csio_put_rnode(ln, rn); +} + +/* + * csio_rnode_init - Initialize rnode. + * @rn: RNode + * @ln: Associated lnode + * + * Caller is responsible for holding the lock. The lock is required + * to be held for inserting the rnode in ln->rnhead list. + */ +static int +csio_rnode_init(struct csio_rnode *rn, struct csio_lnode *ln) +{ + csio_rnode_to_lnode(rn) = ln; + csio_init_state(&rn->sm, csio_rns_uninit); + INIT_LIST_HEAD(&rn->host_cmpl_q); + csio_rn_flowid(rn) = CSIO_INVALID_IDX; + + /* Add rnode to list of lnodes->rnhead */ + list_add_tail(&rn->sm.sm_list, &ln->rnhead); + + return 0; +} + +static void +csio_rnode_exit(struct csio_rnode *rn) +{ + list_del_init(&rn->sm.sm_list); + CSIO_DB_ASSERT(list_empty(&rn->host_cmpl_q)); +} diff --git a/drivers/scsi/csiostor/csio_rnode.h b/drivers/scsi/csiostor/csio_rnode.h new file mode 100644 index 0000000..a3b434c --- /dev/null +++ b/drivers/scsi/csiostor/csio_rnode.h @@ -0,0 +1,141 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_RNODE_H__ +#define __CSIO_RNODE_H__ + +#include "csio_defs.h" + +/* State machine evets */ +enum csio_rn_ev { + CSIO_RNFE_NONE = (uint32_t)0, /* None */ + CSIO_RNFE_LOGGED_IN, /* [N/F]Port login + * complete. + */ + CSIO_RNFE_PRLI_DONE, /* PRLI completed */ + CSIO_RNFE_PLOGI_RECV, /* Received PLOGI */ + CSIO_RNFE_PRLI_RECV, /* Received PLOGI */ + CSIO_RNFE_LOGO_RECV, /* Received LOGO */ + CSIO_RNFE_PRLO_RECV, /* Received PRLO */ + CSIO_RNFE_DOWN, /* Rnode is down */ + CSIO_RNFE_CLOSE, /* Close rnode */ + CSIO_RNFE_NAME_MISSING, /* Rnode name missing + * in name server. + */ + CSIO_RNFE_MAX_EVENT, +}; + +/* rnode stats */ +struct csio_rnode_stats { + uint32_t n_err; /* error */ + uint32_t n_err_inval; /* invalid parameter */ + uint32_t n_err_nomem; /* error nomem */ + uint32_t n_evt_unexp; /* unexpected event */ + uint32_t n_evt_drop; /* unexpected event */ + uint32_t n_evt_fw[RSCN_DEV_LOST]; /* fw events */ + enum csio_rn_ev n_evt_sm[CSIO_RNFE_MAX_EVENT]; /* State m/c events */ + uint32_t n_lun_rst; /* Number of resets of + * of LUNs under this + * target + */ + uint32_t n_lun_rst_fail; /* Number of LUN reset + * failures. + */ + uint32_t n_tgt_rst; /* Number of target resets */ + uint32_t n_tgt_rst_fail; /* Number of target reset + * failures. + */ +}; + +/* Defines for rnode role */ +#define CSIO_RNFR_INITIATOR 0x1 +#define CSIO_RNFR_TARGET 0x2 +#define CSIO_RNFR_FABRIC 0x4 +#define CSIO_RNFR_NS 0x8 +#define CSIO_RNFR_NPORT 0x10 + +struct csio_rnode { + struct csio_sm sm; /* State machine - + * should be the + * 1st member + */ + struct csio_lnode *lnp; /* Pointer to owning + * Lnode */ + uint32_t flowid; /* Firmware ID */ + struct list_head host_cmpl_q; /* SCSI IOs + * pending to completed + * to Mid-layer. + */ + /* FC identifiers for remote node */ + uint32_t nport_id; + uint16_t fcp_flags; /* FCP Flags */ + uint8_t cur_evt; /* Current event */ + uint8_t prev_evt; /* Previous event */ + uint32_t role; /* Fabric/Target/ + * Initiator/NS + */ + struct fcoe_rdev_entry *rdev_entry; /* Rdev entry */ + struct csio_service_parms rn_sparm; + + /* FC transport attributes */ + struct fc_rport *rport; /* FC transport rport */ + uint32_t supp_classes; /* Supported FC classes */ + uint32_t maxframe_size; /* Max Frame size */ + uint32_t scsi_id; /* Transport given SCSI id */ + + struct csio_rnode_stats stats; /* Common rnode stats */ +}; + +#define csio_rn_flowid(rn) ((rn)->flowid) +#define csio_rn_wwpn(rn) ((rn)->rn_sparm.wwpn) +#define csio_rn_wwnn(rn) ((rn)->rn_sparm.wwnn) +#define csio_rnode_to_lnode(rn) ((rn)->lnp) + +int csio_is_rnode_ready(struct csio_rnode *rn); +void csio_rnode_state_to_str(struct csio_rnode *rn, int8_t *str); + +struct csio_rnode *csio_rnode_lookup_portid(struct csio_lnode *, uint32_t); +struct csio_rnode *csio_confirm_rnode(struct csio_lnode *, + uint32_t, struct fcoe_rdev_entry *); + +void csio_rnode_fwevt_handler(struct csio_rnode *rn, uint8_t fwevt); + +void csio_put_rnode(struct csio_lnode *ln, struct csio_rnode *rn); + +void csio_reg_rnode(struct csio_rnode *); +void csio_unreg_rnode(struct csio_rnode *); + +void csio_rnode_devloss_handler(struct csio_rnode *); + +#endif /* ifndef __CSIO_RNODE_H__ */ diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c new file mode 100644 index 0000000..ddd38e5 --- /dev/null +++ b/drivers/scsi/csiostor/csio_scsi.c @@ -0,0 +1,2555 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/compiler.h> +#include <linux/export.h> +#include <linux/module.h> +#include <asm/unaligned.h> +#include <asm/page.h> +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" +#include "csio_scsi.h" +#include "csio_init.h" + +int csio_scsi_eqsize = 65536; +int csio_scsi_iqlen = 128; +int csio_scsi_ioreqs = 2048; +uint32_t csio_max_scan_tmo; +uint32_t csio_delta_scan_tmo = 5; +int csio_lun_qdepth = 32; + +static int csio_ddp_descs = 128; + +static int csio_do_abrt_cls(struct csio_hw *, + struct csio_ioreq *, bool); + +static void csio_scsis_uninit(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_io_active(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_tm_active(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_aborting(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_closing(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_shost_cmpl_await(struct csio_ioreq *, enum csio_scsi_ev); + +/* + * csio_scsi_match_io - Match an ioreq with the given SCSI level data. + * @ioreq: The I/O request + * @sld: Level information + * + * Should be called with lock held. + * + */ +static bool +csio_scsi_match_io(struct csio_ioreq *ioreq, struct csio_scsi_level_data *sld) +{ + struct scsi_cmnd *scmnd = csio_scsi_cmnd(ioreq); + + switch (sld->level) { + case CSIO_LEV_LUN: + if (scmnd == NULL) + return false; + + return ((ioreq->lnode == sld->lnode) && + (ioreq->rnode == sld->rnode) && + ((uint64_t)scmnd->device->lun == sld->oslun)); + + case CSIO_LEV_RNODE: + return ((ioreq->lnode == sld->lnode) && + (ioreq->rnode == sld->rnode)); + case CSIO_LEV_LNODE: + return (ioreq->lnode == sld->lnode); + case CSIO_LEV_ALL: + return true; + default: + return false; + } +} + +/* + * csio_scsi_gather_active_ios - Gather active I/Os based on level + * @scm: SCSI module + * @sld: Level information + * @dest: The queue where these I/Os have to be gathered. + * + * Should be called with lock held. + */ +static void +csio_scsi_gather_active_ios(struct csio_scsim *scm, + struct csio_scsi_level_data *sld, + struct list_head *dest) +{ + struct list_head *tmp, *next; + + if (list_empty(&scm->active_q)) + return; + + /* Just splice the entire active_q into dest */ + if (sld->level == CSIO_LEV_ALL) { + list_splice_tail_init(&scm->active_q, dest); + return; + } + + list_for_each_safe(tmp, next, &scm->active_q) { + if (csio_scsi_match_io((struct csio_ioreq *)tmp, sld)) { + list_del_init(tmp); + list_add_tail(tmp, dest); + } + } +} + +static inline bool +csio_scsi_itnexus_loss_error(uint16_t error) +{ + switch (error) { + case FW_ERR_LINK_DOWN: + case FW_RDEV_NOT_READY: + case FW_ERR_RDEV_LOST: + case FW_ERR_RDEV_LOGO: + case FW_ERR_RDEV_IMPL_LOGO: + return 1; + } + return 0; +} + +static inline void +csio_scsi_tag(struct scsi_cmnd *scmnd, uint8_t *tag, uint8_t hq, + uint8_t oq, uint8_t sq) +{ + char stag[2]; + + if (scsi_populate_tag_msg(scmnd, stag)) { + switch (stag[0]) { + case HEAD_OF_QUEUE_TAG: + *tag = hq; + break; + case ORDERED_QUEUE_TAG: + *tag = oq; + break; + default: + *tag = sq; + break; + } + } else + *tag = 0; +} + +/* + * csio_scsi_fcp_cmnd - Frame the SCSI FCP command paylod. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * + * This routine is shared between FCP_WRITE, FCP_READ and FCP_CMD requests. + */ +static inline void +csio_scsi_fcp_cmnd(struct csio_ioreq *req, void *addr) +{ + struct fcp_cmnd *fcp_cmnd = (struct fcp_cmnd *)addr; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + /* Check for Task Management */ + if (likely(scmnd->SCp.Message == 0)) { + int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun); + fcp_cmnd->fc_tm_flags = 0; + fcp_cmnd->fc_cmdref = 0; + fcp_cmnd->fc_pri_ta = 0; + + memcpy(fcp_cmnd->fc_cdb, scmnd->cmnd, 16); + csio_scsi_tag(scmnd, &fcp_cmnd->fc_pri_ta, + FCP_PTA_HEADQ, FCP_PTA_ORDERED, FCP_PTA_SIMPLE); + fcp_cmnd->fc_dl = cpu_to_be32(scsi_bufflen(scmnd)); + + if (req->nsge) + if (req->datadir == DMA_TO_DEVICE) + fcp_cmnd->fc_flags = FCP_CFL_WRDATA; + else + fcp_cmnd->fc_flags = FCP_CFL_RDDATA; + else + fcp_cmnd->fc_flags = 0; + } else { + memset(fcp_cmnd, 0, sizeof(*fcp_cmnd)); + int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun); + fcp_cmnd->fc_tm_flags = (uint8_t)scmnd->SCp.Message; + } +} + +/* + * csio_scsi_init_cmd_wr - Initialize the SCSI CMD WR. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + * + * Wrapper for populating fw_scsi_cmd_wr. + */ +static inline void +csio_scsi_init_cmd_wr(struct csio_ioreq *req, void *addr, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_cmd_wr *wr = (struct fw_scsi_cmd_wr *)addr; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_CMD_WR) | + FW_SCSI_CMD_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16( + DIV_ROUND_UP(size, 16))); + + wr->cookie = (uintptr_t) req; + wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t) req->tmo; + wr->r3 = 0; + memset(&wr->r5, 0, 8); + + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r6 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r4_lo[0] = 0; + wr->u.fcoe.r4_lo[1] = 0; + + /* Frame a FCP command */ + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)addr + + sizeof(struct fw_scsi_cmd_wr))); +} + +#define CSIO_SCSI_CMD_WR_SZ(_imm) \ + (sizeof(struct fw_scsi_cmd_wr) + /* WR size */ \ + ALIGN((_imm), 16)) /* Immed data */ + +#define CSIO_SCSI_CMD_WR_SZ_16(_imm) \ + (ALIGN(CSIO_SCSI_CMD_WR_SZ((_imm)), 16)) + +/* + * csio_scsi_cmd - Create a SCSI CMD WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with SCSI CMD WR. + * + */ +static inline void +csio_scsi_cmd(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + uint32_t size = CSIO_SCSI_CMD_WR_SZ_16(scsim->proto_cmd_len); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (unlikely(req->drv_status != 0)) + return; + + if (wrp.size1 >= size) { + /* Initialize WR in one shot */ + csio_scsi_init_cmd_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_cmd_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } +} + +/* + * csio_scsi_init_ulptx_dsgl - Fill in a ULP_TX_SC_DSGL + * @hw: HW module + * @req: IO request + * @sgl: ULP TX SGL pointer. + * + */ +static inline void +csio_scsi_init_ultptx_dsgl(struct csio_hw *hw, struct csio_ioreq *req, + struct ulptx_sgl *sgl) +{ + struct ulptx_sge_pair *sge_pair = NULL; + struct scatterlist *sgel; + uint32_t i = 0; + uint32_t xfer_len; + struct list_head *tmp; + struct csio_dma_buf *dma_buf; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | ULPTX_MORE | + ULPTX_NSGE(req->nsge)); + /* Now add the data SGLs */ + if (likely(!req->dcopy)) { + scsi_for_each_sg(scmnd, sgel, req->nsge, i) { + if (i == 0) { + sgl->addr0 = cpu_to_be64(sg_dma_address(sgel)); + sgl->len0 = cpu_to_be32(sg_dma_len(sgel)); + sge_pair = (struct ulptx_sge_pair *)(sgl + 1); + continue; + } + if ((i - 1) & 0x1) { + sge_pair->addr[1] = cpu_to_be64( + sg_dma_address(sgel)); + sge_pair->len[1] = cpu_to_be32( + sg_dma_len(sgel)); + sge_pair++; + } else { + sge_pair->addr[0] = cpu_to_be64( + sg_dma_address(sgel)); + sge_pair->len[0] = cpu_to_be32( + sg_dma_len(sgel)); + } + } + } else { + /* Program sg elements with driver's DDP buffer */ + xfer_len = scsi_bufflen(scmnd); + list_for_each(tmp, &req->gen_list) { + dma_buf = (struct csio_dma_buf *)tmp; + if (i == 0) { + sgl->addr0 = cpu_to_be64(dma_buf->paddr); + sgl->len0 = cpu_to_be32( + min(xfer_len, dma_buf->len)); + sge_pair = (struct ulptx_sge_pair *)(sgl + 1); + } else if ((i - 1) & 0x1) { + sge_pair->addr[1] = cpu_to_be64(dma_buf->paddr); + sge_pair->len[1] = cpu_to_be32( + min(xfer_len, dma_buf->len)); + sge_pair++; + } else { + sge_pair->addr[0] = cpu_to_be64(dma_buf->paddr); + sge_pair->len[0] = cpu_to_be32( + min(xfer_len, dma_buf->len)); + } + xfer_len -= min(xfer_len, dma_buf->len); + i++; + } + } +} + +/* + * csio_scsi_init_read_wr - Initialize the READ SCSI WR. + * @req: IO req structure. + * @wrp: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL + * + * Wrapper for populating fw_scsi_read_wr. + */ +static inline void +csio_scsi_init_read_wr(struct csio_ioreq *req, void *wrp, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_read_wr *wr = (struct fw_scsi_read_wr *)wrp; + struct ulptx_sgl *sgl; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_READ_WR) | + FW_SCSI_READ_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16(DIV_ROUND_UP(size, 16))); + wr->cookie = (uintptr_t)req; + wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t)(req->tmo); + wr->use_xfer_cnt = 1; + wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r4 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r3_lo[0] = 0; + wr->u.fcoe.r3_lo[1] = 0; + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp + + sizeof(struct fw_scsi_read_wr))); + + /* Move WR pointer past command and immediate data */ + sgl = (struct ulptx_sgl *)((uintptr_t)wrp + + sizeof(struct fw_scsi_read_wr) + ALIGN(imm, 16)); + + /* Fill in the DSGL */ + csio_scsi_init_ultptx_dsgl(hw, req, sgl); +} + +/* + * csio_scsi_init_write_wr - Initialize the WRITE SCSI WR. + * @req: IO req structure. + * @wrp: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL + * + * Wrapper for populating fw_scsi_write_wr. + */ +static inline void +csio_scsi_init_write_wr(struct csio_ioreq *req, void *wrp, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_write_wr *wr = (struct fw_scsi_write_wr *)wrp; + struct ulptx_sgl *sgl; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_WRITE_WR) | + FW_SCSI_WRITE_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16(DIV_ROUND_UP(size, 16))); + wr->cookie = (uintptr_t)req; + wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t)(req->tmo); + wr->use_xfer_cnt = 1; + wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r4 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r3_lo[0] = 0; + wr->u.fcoe.r3_lo[1] = 0; + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp + + sizeof(struct fw_scsi_write_wr))); + + /* Move WR pointer past command and immediate data */ + sgl = (struct ulptx_sgl *)((uintptr_t)wrp + + sizeof(struct fw_scsi_write_wr) + ALIGN(imm, 16)); + + /* Fill in the DSGL */ + csio_scsi_init_ultptx_dsgl(hw, req, sgl); +} + +/* Calculate WR size needed for fw_scsi_read_wr/fw_scsi_write_wr */ +#define CSIO_SCSI_DATA_WRSZ(req, oper, sz, imm) \ +do { \ + (sz) = sizeof(struct fw_scsi_##oper##_wr) + /* WR size */ \ + ALIGN((imm), 16) + /* Immed data */ \ + sizeof(struct ulptx_sgl); /* ulptx_sgl */ \ + \ + if (unlikely((req)->nsge > 1)) \ + (sz) += (sizeof(struct ulptx_sge_pair) * \ + (ALIGN(((req)->nsge - 1), 2) / 2)); \ + /* Data SGE */ \ +} while (0) + +/* + * csio_scsi_read - Create a SCSI READ WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with + * SCSI READ WR. + * + */ +static inline void +csio_scsi_read(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + uint32_t size; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + CSIO_SCSI_DATA_WRSZ(req, read, size, scsim->proto_cmd_len); + size = ALIGN(size, 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (likely(req->drv_status == 0)) { + if (likely(wrp.size1 >= size)) { + /* Initialize WR in one shot */ + csio_scsi_init_read_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_read_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } + } +} + +/* + * csio_scsi_write - Create a SCSI WRITE WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with + * SCSI WRITE WR. + * + */ +static inline void +csio_scsi_write(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + uint32_t size; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + CSIO_SCSI_DATA_WRSZ(req, write, size, scsim->proto_cmd_len); + size = ALIGN(size, 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (likely(req->drv_status == 0)) { + if (likely(wrp.size1 >= size)) { + /* Initialize WR in one shot */ + csio_scsi_init_write_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_write_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } + } +} + +/* + * csio_setup_ddp - Setup DDP buffers for Read request. + * @req: IO req structure. + * + * Checks SGLs/Data buffers are virtually contiguous required for DDP. + * If contiguous,driver posts SGLs in the WR otherwise post internal + * buffers for such request for DDP. + */ +static inline void +csio_setup_ddp(struct csio_scsim *scsim, struct csio_ioreq *req) +{ +#ifdef __CSIO_DEBUG__ + struct csio_hw *hw = req->lnode->hwp; +#endif + struct scatterlist *sgel = NULL; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + uint64_t sg_addr = 0; + uint32_t ddp_pagesz = 4096; + uint32_t buf_off; + struct csio_dma_buf *dma_buf = NULL; + uint32_t alloc_len = 0; + uint32_t xfer_len = 0; + uint32_t sg_len = 0; + uint32_t i; + + scsi_for_each_sg(scmnd, sgel, req->nsge, i) { + sg_addr = sg_dma_address(sgel); + sg_len = sg_dma_len(sgel); + + buf_off = sg_addr & (ddp_pagesz - 1); + + /* Except 1st buffer,all buffer addr have to be Page aligned */ + if (i != 0 && buf_off) { + csio_dbg(hw, "SGL addr not DDP aligned (%llx:%d)\n", + sg_addr, sg_len); + goto unaligned; + } + + /* Except last buffer,all buffer must end on page boundary */ + if ((i != (req->nsge - 1)) && + ((buf_off + sg_len) & (ddp_pagesz - 1))) { + csio_dbg(hw, + "SGL addr not ending on page boundary" + "(%llx:%d)\n", sg_addr, sg_len); + goto unaligned; + } + } + + /* SGL's are virtually contiguous. HW will DDP to SGLs */ + req->dcopy = 0; + csio_scsi_read(req); + + return; + +unaligned: + CSIO_INC_STATS(scsim, n_unaligned); + /* + * For unaligned SGLs, driver will allocate internal DDP buffer. + * Once command is completed data from DDP buffer copied to SGLs + */ + req->dcopy = 1; + + /* Use gen_list to store the DDP buffers */ + INIT_LIST_HEAD(&req->gen_list); + xfer_len = scsi_bufflen(scmnd); + + i = 0; + /* Allocate ddp buffers for this request */ + while (alloc_len < xfer_len) { + dma_buf = csio_get_scsi_ddp(scsim); + if (dma_buf == NULL || i > scsim->max_sge) { + req->drv_status = -EBUSY; + break; + } + alloc_len += dma_buf->len; + /* Added to IO req */ + list_add_tail(&dma_buf->list, &req->gen_list); + i++; + } + + if (!req->drv_status) { + /* set number of ddp bufs used */ + req->nsge = i; + csio_scsi_read(req); + return; + } + + /* release dma descs */ + if (i > 0) + csio_put_scsi_ddp_list(scsim, &req->gen_list, i); +} + +/* + * csio_scsi_init_abrt_cls_wr - Initialize an ABORT/CLOSE WR. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * @size: Size of WR + * @abort: abort OR close + * + * Wrapper for populating fw_scsi_cmd_wr. + */ +static inline void +csio_scsi_init_abrt_cls_wr(struct csio_ioreq *req, void *addr, uint32_t size, + bool abort) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_abrt_cls_wr *wr = (struct fw_scsi_abrt_cls_wr *)addr; + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_ABRT_CLS_WR)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16( + DIV_ROUND_UP(size, 16))); + + wr->cookie = (uintptr_t) req; + wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t) req->tmo; + /* 0 for CHK_ALL_IO tells FW to look up t_cookie */ + wr->sub_opcode_to_chk_all_io = + (FW_SCSI_ABRT_CLS_WR_SUB_OPCODE(abort) | + FW_SCSI_ABRT_CLS_WR_CHK_ALL_IO(0)); + wr->r3[0] = 0; + wr->r3[1] = 0; + wr->r3[2] = 0; + wr->r3[3] = 0; + /* Since we re-use the same ioreq for abort as well */ + wr->t_cookie = (uintptr_t) req; +} + +static inline void +csio_scsi_abrt_cls(struct csio_ioreq *req, bool abort) +{ + struct csio_wr_pair wrp; + struct csio_hw *hw = req->lnode->hwp; + uint32_t size = ALIGN(sizeof(struct fw_scsi_abrt_cls_wr), 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (req->drv_status != 0) + return; + + if (wrp.size1 >= size) { + /* Initialize WR in one shot */ + csio_scsi_init_abrt_cls_wr(req, wrp.addr1, size, abort); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_abrt_cls_wr(req, (void *)tmpwr, size, abort); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } +} + +/*****************************************************************************/ +/* START: SCSI SM */ +/*****************************************************************************/ +static void +csio_scsis_uninit(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_START_IO: + + if (req->nsge) { + if (req->datadir == DMA_TO_DEVICE) { + req->dcopy = 0; + csio_scsi_write(req); + } else + csio_setup_ddp(scsim, req); + } else { + csio_scsi_cmd(req); + } + + if (likely(req->drv_status == 0)) { + /* change state and enqueue on active_q */ + csio_set_state(&req->sm, csio_scsis_io_active); + list_add_tail(&req->sm.sm_list, &scsim->active_q); + csio_wr_issue(hw, req->eq_idx, false); + CSIO_INC_STATS(scsim, n_active); + + return; + } + break; + + case CSIO_SCSIE_START_TM: + csio_scsi_cmd(req); + if (req->drv_status == 0) { + /* + * NOTE: We collect the affected I/Os prior to issuing + * LUN reset, and not after it. This is to prevent + * aborting I/Os that get issued after the LUN reset, + * but prior to LUN reset completion (in the event that + * the host stack has not blocked I/Os to a LUN that is + * being reset. + */ + csio_set_state(&req->sm, csio_scsis_tm_active); + list_add_tail(&req->sm.sm_list, &scsim->active_q); + csio_wr_issue(hw, req->eq_idx, false); + CSIO_INC_STATS(scsim, n_tm_active); + } + return; + + case CSIO_SCSIE_ABORT: + case CSIO_SCSIE_CLOSE: + /* + * NOTE: + * We could get here due to : + * - a window in the cleanup path of the SCSI module + * (csio_scsi_abort_io()). Please see NOTE in this function. + * - a window in the time we tried to issue an abort/close + * of a request to FW, and the FW completed the request + * itself. + * Print a message for now, and return INVAL either way. + */ + req->drv_status = -EINVAL; + csio_warn(hw, "Trying to abort/close completed IO:%p!\n", req); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_io_active(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + struct csio_rnode *rn; + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + /* + * In MSIX mode, with multiple queues, the SCSI compeltions + * could reach us sooner than the FW events sent to indicate + * I-T nexus loss (link down, remote device logo etc). We + * dont want to be returning such I/Os to the upper layer + * immediately, since we wouldnt have reported the I-T nexus + * loss itself. This forces us to serialize such completions + * with the reporting of the I-T nexus loss. Therefore, we + * internally queue up such up such completions in the rnode. + * The reporting of I-T nexus loss to the upper layer is then + * followed by the returning of I/Os in this internal queue. + * Having another state alongwith another queue helps us take + * actions for events such as ABORT received while we are + * in this rnode queue. + */ + if (unlikely(req->wr_status != FW_SUCCESS)) { + rn = req->rnode; + /* + * FW says remote device is lost, but rnode + * doesnt reflect it. + */ + if (csio_scsi_itnexus_loss_error(req->wr_status) && + csio_is_rnode_ready(rn)) { + csio_set_state(&req->sm, + csio_scsis_shost_cmpl_await); + list_add_tail(&req->sm.sm_list, + &rn->host_cmpl_q); + } + } + + break; + + case CSIO_SCSIE_ABORT: + csio_scsi_abrt_cls(req, SCSI_ABORT); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_aborting); + } + break; + + case CSIO_SCSIE_CLOSE: + csio_scsi_abrt_cls(req, SCSI_CLOSE); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_closing); + } + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_tm_active(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + CSIO_DEC_STATS(scm, n_tm_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + + break; + + case CSIO_SCSIE_ABORT: + csio_scsi_abrt_cls(req, SCSI_ABORT); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_aborting); + } + break; + + + case CSIO_SCSIE_CLOSE: + csio_scsi_abrt_cls(req, SCSI_CLOSE); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_closing); + } + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_tm_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_aborting(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + csio_dbg(hw, + "ioreq %p recvd cmpltd (wr_status:%d) " + "in aborting st\n", req, req->wr_status); + /* + * Use -ECANCELED to explicitly tell the ABORTED event that + * the original I/O was returned to driver by FW. + * We dont really care if the I/O was returned with success by + * FW (because the ABORT and completion of the I/O crossed each + * other), or any other return value. Once we are in aborting + * state, the success or failure of the I/O is unimportant to + * us. + */ + req->drv_status = -ECANCELED; + break; + + case CSIO_SCSIE_ABORT: + CSIO_INC_STATS(scm, n_abrt_dups); + break; + + case CSIO_SCSIE_ABORTED: + + csio_dbg(hw, "abort of %p return status:0x%x drv_status:%x\n", + req, req->wr_status, req->drv_status); + /* + * Check if original I/O WR completed before the Abort + * completion. + */ + if (req->drv_status != -ECANCELED) { + csio_warn(hw, + "Abort completed before original I/O," + " req:%p\n", req); + CSIO_DB_ASSERT(0); + } + + /* + * There are the following possible scenarios: + * 1. The abort completed successfully, FW returned FW_SUCCESS. + * 2. The completion of an I/O and the receipt of + * abort for that I/O by the FW crossed each other. + * The FW returned FW_EINVAL. The original I/O would have + * returned with FW_SUCCESS or any other SCSI error. + * 3. The FW couldnt sent the abort out on the wire, as there + * was an I-T nexus loss (link down, remote device logged + * out etc). FW sent back an appropriate IT nexus loss status + * for the abort. + * 4. FW sent an abort, but abort timed out (remote device + * didnt respond). FW replied back with + * FW_SCSI_ABORT_TIMEDOUT. + * 5. FW couldnt genuinely abort the request for some reason, + * and sent us an error. + * + * The first 3 scenarios are treated as succesful abort + * operations by the host, while the last 2 are failed attempts + * to abort. Manipulate the return value of the request + * appropriately, so that host can convey these results + * back to the upper layer. + */ + if ((req->wr_status == FW_SUCCESS) || + (req->wr_status == FW_EINVAL) || + csio_scsi_itnexus_loss_error(req->wr_status)) + req->wr_status = FW_SCSI_ABORT_REQUESTED; + + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_CLOSE: + /* + * We can receive this event from the module + * cleanup paths, if the FW forgot to reply to the ABORT WR + * and left this ioreq in this state. For now, just ignore + * the event. The CLOSE event is sent to this state, as + * the LINK may have already gone down. + */ + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_closing(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + csio_dbg(hw, + "ioreq %p recvd cmpltd (wr_status:%d) " + "in closing st\n", req, req->wr_status); + /* + * Use -ECANCELED to explicitly tell the CLOSED event that + * the original I/O was returned to driver by FW. + * We dont really care if the I/O was returned with success by + * FW (because the CLOSE and completion of the I/O crossed each + * other), or any other return value. Once we are in aborting + * state, the success or failure of the I/O is unimportant to + * us. + */ + req->drv_status = -ECANCELED; + break; + + case CSIO_SCSIE_CLOSED: + /* + * Check if original I/O WR completed before the Close + * completion. + */ + if (req->drv_status != -ECANCELED) { + csio_fatal(hw, + "Close completed before original I/O," + " req:%p\n", req); + CSIO_DB_ASSERT(0); + } + + /* + * Either close succeeded, or we issued close to FW at the + * same time FW compelted it to us. Either way, the I/O + * is closed. + */ + CSIO_DB_ASSERT((req->wr_status == FW_SUCCESS) || + (req->wr_status == FW_EINVAL)); + req->wr_status = FW_SCSI_CLOSE_REQUESTED; + + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_CLOSE: + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + switch (evt) { + case CSIO_SCSIE_ABORT: + case CSIO_SCSIE_CLOSE: + /* + * Just succeed the abort request, and hope that + * the remote device unregister path will cleanup + * this I/O to the upper layer within a sane + * amount of time. + */ + /* + * A close can come in during a LINK DOWN. The FW would have + * returned us the I/O back, but not the remote device lost + * FW event. In this interval, if the I/O times out at the upper + * layer, a close can come in. Take the same action as abort: + * return success, and hope that the remote device unregister + * path will cleanup this I/O. If the FW still doesnt send + * the msg, the close times out, and the upper layer resorts + * to the next level of error recovery. + */ + req->drv_status = 0; + break; + case CSIO_SCSIE_DRVCLEANUP: + csio_set_state(&req->sm, csio_scsis_uninit); + break; + default: + csio_dbg(req->lnode->hwp, "Unhandled event:%d sent to req:%p\n", + evt, req); + CSIO_DB_ASSERT(0); + } +} + +/* + * csio_scsi_cmpl_handler - WR completion handler for SCSI. + * @hw: HW module. + * @wr: The completed WR from the ingress queue. + * @len: Length of the WR. + * @flb: Freelist buffer array. + * @priv: Private object + * @scsiwr: Pointer to SCSI WR. + * + * This is the WR completion handler called per completion from the + * ISR. It is called with lock held. It walks past the RSS and CPL message + * header where the actual WR is present. + * It then gets the status, WR handle (ioreq pointer) and the len of + * the WR, based on WR opcode. Only on a non-good status is the entire + * WR copied into the WR cache (ioreq->fw_wr). + * The ioreq corresponding to the WR is returned to the caller. + * NOTE: The SCSI queue doesnt allocate a freelist today, hence + * no freelist buffer is expected. + */ +struct csio_ioreq * +csio_scsi_cmpl_handler(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv, uint8_t **scsiwr) +{ + struct csio_ioreq *ioreq = NULL; + struct cpl_fw6_msg *cpl; + uint8_t *tempwr; + uint8_t status; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + /* skip RSS header */ + cpl = (struct cpl_fw6_msg *)((uintptr_t)wr + sizeof(__be64)); + + if (unlikely(cpl->opcode != CPL_FW6_MSG)) { + csio_warn(hw, "Error: Invalid CPL msg %x recvd on SCSI q\n", + cpl->opcode); + CSIO_INC_STATS(scm, n_inval_cplop); + return NULL; + } + + tempwr = (uint8_t *)(cpl->data); + status = csio_wr_status(tempwr); + *scsiwr = tempwr; + + if (likely((*tempwr == FW_SCSI_READ_WR) || + (*tempwr == FW_SCSI_WRITE_WR) || + (*tempwr == FW_SCSI_CMD_WR))) { + ioreq = (struct csio_ioreq *)((uintptr_t) + (((struct fw_scsi_read_wr *)tempwr)->cookie)); + CSIO_DB_ASSERT(virt_addr_valid(ioreq)); + + ioreq->wr_status = status; + + return ioreq; + } + + if (*tempwr == FW_SCSI_ABRT_CLS_WR) { + ioreq = (struct csio_ioreq *)((uintptr_t) + (((struct fw_scsi_abrt_cls_wr *)tempwr)->cookie)); + CSIO_DB_ASSERT(virt_addr_valid(ioreq)); + + ioreq->wr_status = status; + return ioreq; + } + + csio_warn(hw, "WR with invalid opcode in SCSI IQ: %x\n", *tempwr); + CSIO_INC_STATS(scm, n_inval_scsiop); + return NULL; +} + +/* + * csio_scsi_cleanup_io_q - Cleanup the given queue. + * @scm: SCSI module. + * @q: Queue to be cleaned up. + * + * Called with lock held. Has to exit with lock held. + */ +void +csio_scsi_cleanup_io_q(struct csio_scsim *scm, struct list_head *q) +{ + struct csio_hw *hw = scm->hw; + struct csio_ioreq *ioreq; + struct list_head *tmp, *next; + struct scsi_cmnd *scmnd; + + /* Call back the completion routines of the active_q */ + list_for_each_safe(tmp, next, q) { + ioreq = (struct csio_ioreq *)tmp; + csio_scsi_drvcleanup(ioreq); + list_del_init(&ioreq->sm.sm_list); + scmnd = csio_scsi_cmnd(ioreq); + spin_unlock_irq(&hw->lock); + + /* + * Upper layers may have cleared this command, hence this + * check to avoid accessing stale references. + */ + if (scmnd != NULL) + ioreq->io_cbfn(hw, ioreq); + + spin_lock_irq(&scm->freelist_lock); + csio_put_scsi_ioreq(scm, ioreq); + spin_unlock_irq(&scm->freelist_lock); + + spin_lock_irq(&hw->lock); + } +} + +#define CSIO_SCSI_ABORT_Q_POLL_MS 2000 + +static void +csio_abrt_cls(struct csio_ioreq *ioreq, struct scsi_cmnd *scmnd) +{ + struct csio_lnode *ln = ioreq->lnode; + struct csio_hw *hw = ln->hwp; + int ready = 0; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + int rv; + + if (csio_scsi_cmnd(ioreq) != scmnd) { + CSIO_INC_STATS(scsim, n_abrt_race_comp); + return; + } + + ready = csio_is_lnode_ready(ln); + + rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE)); + if (rv != 0) { + if (ready) + CSIO_INC_STATS(scsim, n_abrt_busy_error); + else + CSIO_INC_STATS(scsim, n_cls_busy_error); + } +} + +/* + * csio_scsi_abort_io_q - Abort all I/Os on given queue + * @scm: SCSI module. + * @q: Queue to abort. + * @tmo: Timeout in ms + * + * Attempt to abort all I/Os on given queue, and wait for a max + * of tmo milliseconds for them to complete. Returns success + * if all I/Os are aborted. Else returns -ETIMEDOUT. + * Should be entered with lock held. Exits with lock held. + * NOTE: + * Lock has to be held across the loop that aborts I/Os, since dropping the lock + * in between can cause the list to be corrupted. As a result, the caller + * of this function has to ensure that the number of I/os to be aborted + * is finite enough to not cause lock-held-for-too-long issues. + */ +static int +csio_scsi_abort_io_q(struct csio_scsim *scm, struct list_head *q, uint32_t tmo) +{ + struct csio_hw *hw = scm->hw; + struct list_head *tmp, *next; + int count = DIV_ROUND_UP(tmo, CSIO_SCSI_ABORT_Q_POLL_MS); + struct scsi_cmnd *scmnd; + + if (list_empty(q)) + return 0; + + csio_dbg(hw, "Aborting SCSI I/Os\n"); + + /* Now abort/close I/Os in the queue passed */ + list_for_each_safe(tmp, next, q) { + scmnd = csio_scsi_cmnd((struct csio_ioreq *)tmp); + csio_abrt_cls((struct csio_ioreq *)tmp, scmnd); + } + + /* Wait till all active I/Os are completed/aborted/closed */ + while (!list_empty(q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all aborts completed */ + if (list_empty(q)) + return 0; + + return -ETIMEDOUT; +} + +/* + * csio_scsim_cleanup_io - Cleanup all I/Os in SCSI module. + * @scm: SCSI module. + * @abort: abort required. + * Called with lock held, should exit with lock held. + * Can sleep when waiting for I/Os to complete. + */ +int +csio_scsim_cleanup_io(struct csio_scsim *scm, bool abort) +{ + struct csio_hw *hw = scm->hw; + int rv = 0; + int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS); + + /* No I/Os pending */ + if (list_empty(&scm->active_q)) + return 0; + + /* Wait until all active I/Os are completed */ + while (!list_empty(&scm->active_q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all I/Os completed */ + if (list_empty(&scm->active_q)) + return 0; + + /* Else abort */ + if (abort) { + rv = csio_scsi_abort_io_q(scm, &scm->active_q, 30000); + if (rv == 0) + return rv; + csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n"); + } + + csio_scsi_cleanup_io_q(scm, &scm->active_q); + + CSIO_DB_ASSERT(list_empty(&scm->active_q)); + + return rv; +} + +/* + * csio_scsim_cleanup_io_lnode - Cleanup all I/Os of given lnode. + * @scm: SCSI module. + * @lnode: lnode + * + * Called with lock held, should exit with lock held. + * Can sleep (with dropped lock) when waiting for I/Os to complete. + */ +int +csio_scsim_cleanup_io_lnode(struct csio_scsim *scm, struct csio_lnode *ln) +{ + struct csio_hw *hw = scm->hw; + struct csio_scsi_level_data sld; + int rv; + int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS); + + csio_dbg(hw, "Gathering all SCSI I/Os on lnode %p\n", ln); + + sld.level = CSIO_LEV_LNODE; + sld.lnode = ln; + INIT_LIST_HEAD(&ln->cmpl_q); + csio_scsi_gather_active_ios(scm, &sld, &ln->cmpl_q); + + /* No I/Os pending on this lnode */ + if (list_empty(&ln->cmpl_q)) + return 0; + + /* Wait until all active I/Os on this lnode are completed */ + while (!list_empty(&ln->cmpl_q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all I/Os completed */ + if (list_empty(&ln->cmpl_q)) + return 0; + + csio_dbg(hw, "Some I/Os pending on ln:%p, aborting them..\n", ln); + + /* I/Os are pending, abort them */ + rv = csio_scsi_abort_io_q(scm, &ln->cmpl_q, 30000); + if (rv != 0) { + csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n"); + csio_scsi_cleanup_io_q(scm, &ln->cmpl_q); + } + + CSIO_DB_ASSERT(list_empty(&ln->cmpl_q)); + + return rv; +} + +static ssize_t +csio_show_hw_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + if (csio_is_hw_ready(hw)) + return snprintf(buf, PAGE_SIZE, "ready\n"); + else + return snprintf(buf, PAGE_SIZE, "not ready\n"); +} + +/* Device reset */ +static ssize_t +csio_device_reset(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + if (*buf != '1') + return -EINVAL; + + /* Delete NPIV lnodes */ + csio_lnodes_exit(hw, 1); + + /* Block upper IOs */ + csio_lnodes_block_request(hw); + + spin_lock_irq(&hw->lock); + csio_hw_reset(hw); + spin_unlock_irq(&hw->lock); + + /* Unblock upper IOs */ + csio_lnodes_unblock_request(hw); + return count; +} + +/* disable port */ +static ssize_t +csio_disable_port(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + bool disable; + + if (*buf == '1' || *buf == '0') + disable = (*buf == '1') ? true : false; + else + return -EINVAL; + + /* Block upper IOs */ + csio_lnodes_block_by_port(hw, ln->portid); + + spin_lock_irq(&hw->lock); + csio_disable_lnodes(hw, ln->portid, disable); + spin_unlock_irq(&hw->lock); + + /* Unblock upper IOs */ + csio_lnodes_unblock_by_port(hw, ln->portid); + return count; +} + +/* Show debug level */ +static ssize_t +csio_show_dbg_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%x\n", ln->params.log_level); +} + +/* Store debug level */ +static ssize_t +csio_store_dbg_level(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + uint32_t dbg_level = 0; + + if (!isdigit(buf[0])) + return -EINVAL; + + if (sscanf(buf, "%i", &dbg_level)) + return -EINVAL; + + ln->params.log_level = dbg_level; + hw->params.log_level = dbg_level; + + return 0; +} + +static DEVICE_ATTR(hw_state, S_IRUGO, csio_show_hw_state, NULL); +static DEVICE_ATTR(device_reset, S_IRUGO | S_IWUSR, NULL, csio_device_reset); +static DEVICE_ATTR(disable_port, S_IRUGO | S_IWUSR, NULL, csio_disable_port); +static DEVICE_ATTR(dbg_level, S_IRUGO | S_IWUSR, csio_show_dbg_level, + csio_store_dbg_level); + +static struct device_attribute *csio_fcoe_lport_attrs[] = { + &dev_attr_hw_state, + &dev_attr_device_reset, + &dev_attr_disable_port, + &dev_attr_dbg_level, + NULL, +}; + +static ssize_t +csio_show_num_reg_rnodes(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%d\n", ln->num_reg_rnodes); +} + +static DEVICE_ATTR(num_reg_rnodes, S_IRUGO, csio_show_num_reg_rnodes, NULL); + +static struct device_attribute *csio_fcoe_vport_attrs[] = { + &dev_attr_num_reg_rnodes, + &dev_attr_dbg_level, + NULL, +}; + +static inline uint32_t +csio_scsi_copy_to_sgl(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *scmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct scatterlist *sg; + uint32_t bytes_left; + uint32_t bytes_copy; + uint32_t buf_off = 0; + uint32_t start_off = 0; + uint32_t sg_off = 0; + void *sg_addr; + void *buf_addr; + struct csio_dma_buf *dma_buf; + + bytes_left = scsi_bufflen(scmnd); + sg = scsi_sglist(scmnd); + dma_buf = (struct csio_dma_buf *)csio_list_next(&req->gen_list); + + /* Copy data from driver buffer to SGs of SCSI CMD */ + while (bytes_left > 0 && sg && dma_buf) { + if (buf_off >= dma_buf->len) { + buf_off = 0; + dma_buf = (struct csio_dma_buf *) + csio_list_next(dma_buf); + continue; + } + + if (start_off >= sg->length) { + start_off -= sg->length; + sg = sg_next(sg); + continue; + } + + buf_addr = dma_buf->vaddr + buf_off; + sg_off = sg->offset + start_off; + bytes_copy = min((dma_buf->len - buf_off), + sg->length - start_off); + bytes_copy = min((uint32_t)(PAGE_SIZE - (sg_off & ~PAGE_MASK)), + bytes_copy); + + sg_addr = kmap_atomic(sg_page(sg) + (sg_off >> PAGE_SHIFT)); + if (!sg_addr) { + csio_err(hw, "failed to kmap sg:%p of ioreq:%p\n", + sg, req); + break; + } + + csio_dbg(hw, "copy_to_sgl:sg_addr %p sg_off %d buf %p len %d\n", + sg_addr, sg_off, buf_addr, bytes_copy); + memcpy(sg_addr + (sg_off & ~PAGE_MASK), buf_addr, bytes_copy); + kunmap_atomic(sg_addr); + + start_off += bytes_copy; + buf_off += bytes_copy; + bytes_left -= bytes_copy; + } + + if (bytes_left > 0) + return DID_ERROR; + else + return DID_OK; +} + +/* + * csio_scsi_err_handler - SCSI error handler. + * @hw: HW module. + * @req: IO request. + * + */ +static inline void +csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct csio_scsim *scm = csio_hw_to_scsim(hw); + struct fcp_resp_with_ext *fcp_resp; + struct fcp_resp_rsp_info *rsp_info; + struct csio_dma_buf *dma_buf; + uint8_t flags, scsi_status = 0; + uint32_t host_status = DID_OK; + uint32_t rsp_len = 0, sns_len = 0; + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + + + switch (req->wr_status) { + case FW_HOSTERROR: + if (unlikely(!csio_is_hw_ready(hw))) + return; + + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_hosterror); + + break; + case FW_SCSI_RSP_ERR: + dma_buf = &req->dma_buf; + fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr; + rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1); + flags = fcp_resp->resp.fr_flags; + scsi_status = fcp_resp->resp.fr_status; + + if (flags & FCP_RSP_LEN_VAL) { + rsp_len = be32_to_cpu(fcp_resp->ext.fr_rsp_len); + if ((rsp_len != 0 && rsp_len != 4 && rsp_len != 8) || + (rsp_info->rsp_code != FCP_TMF_CMPL)) { + host_status = DID_ERROR; + goto out; + } + } + + if ((flags & FCP_SNS_LEN_VAL) && fcp_resp->ext.fr_sns_len) { + sns_len = be32_to_cpu(fcp_resp->ext.fr_sns_len); + if (sns_len > SCSI_SENSE_BUFFERSIZE) + sns_len = SCSI_SENSE_BUFFERSIZE; + + memcpy(cmnd->sense_buffer, + &rsp_info->_fr_resvd[0] + rsp_len, sns_len); + CSIO_INC_STATS(scm, n_autosense); + } + + scsi_set_resid(cmnd, 0); + + /* Under run */ + if (flags & FCP_RESID_UNDER) { + scsi_set_resid(cmnd, + be32_to_cpu(fcp_resp->ext.fr_resid)); + + if (!(flags & FCP_SNS_LEN_VAL) && + (scsi_status == SAM_STAT_GOOD) && + ((scsi_bufflen(cmnd) - scsi_get_resid(cmnd)) + < cmnd->underflow)) + host_status = DID_ERROR; + } else if (flags & FCP_RESID_OVER) + host_status = DID_ERROR; + + CSIO_INC_STATS(scm, n_rsperror); + break; + + case FW_SCSI_OVER_FLOW_ERR: + csio_warn(hw, + "Over-flow error,cmnd:0x%x expected len:0x%x" + " resid:0x%x\n", cmnd->cmnd[0], + scsi_bufflen(cmnd), scsi_get_resid(cmnd)); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_ovflerror); + break; + + case FW_SCSI_UNDER_FLOW_ERR: + csio_warn(hw, + "Under-flow error,cmnd:0x%x expected" + " len:0x%x resid:0x%x lun:0x%x ssn:0x%x\n", + cmnd->cmnd[0], scsi_bufflen(cmnd), + scsi_get_resid(cmnd), cmnd->device->lun, + rn->flowid); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_unflerror); + break; + + case FW_SCSI_ABORT_REQUESTED: + case FW_SCSI_ABORTED: + case FW_SCSI_CLOSE_REQUESTED: + csio_dbg(hw, "Req %p cmd:%p op:%x %s\n", req, cmnd, + cmnd->cmnd[0], + (req->wr_status == FW_SCSI_CLOSE_REQUESTED) ? + "closed" : "aborted"); + /* + * csio_eh_abort_handler checks this value to + * succeed or fail the abort request. + */ + host_status = DID_REQUEUE; + if (req->wr_status == FW_SCSI_CLOSE_REQUESTED) + CSIO_INC_STATS(scm, n_closed); + else + CSIO_INC_STATS(scm, n_aborted); + break; + + case FW_SCSI_ABORT_TIMEDOUT: + /* FW timed out the abort itself */ + csio_dbg(hw, "FW timed out abort req:%p cmnd:%p status:%x\n", + req, cmnd, req->wr_status); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_abrt_timedout); + break; + + case FW_RDEV_NOT_READY: + /* + * In firmware, a RDEV can get into this state + * temporarily, before moving into dissapeared/lost + * state. So, the driver should complete the request equivalent + * to device-disappeared! + */ + CSIO_INC_STATS(scm, n_rdev_nr_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_LOST: + CSIO_INC_STATS(scm, n_rdev_lost_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_LOGO: + CSIO_INC_STATS(scm, n_rdev_logo_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_IMPL_LOGO: + host_status = DID_ERROR; + break; + + case FW_ERR_LINK_DOWN: + CSIO_INC_STATS(scm, n_link_down_error); + host_status = DID_ERROR; + break; + + case FW_FCOE_NO_XCHG: + CSIO_INC_STATS(scm, n_no_xchg_error); + host_status = DID_ERROR; + break; + + default: + csio_err(hw, "Unknown SCSI FW WR status:%d req:%p cmnd:%p\n", + req->wr_status, req, cmnd); + CSIO_DB_ASSERT(0); + + CSIO_INC_STATS(scm, n_unknown_error); + host_status = DID_ERROR; + break; + } + +out: + if (req->nsge > 0) + scsi_dma_unmap(cmnd); + + cmnd->result = (((host_status) << 16) | scsi_status); + cmnd->scsi_done(cmnd); + + /* Wake up waiting threads */ + csio_scsi_cmnd(req) = NULL; + complete_all(&req->cmplobj); +} + +/* + * csio_scsi_cbfn - SCSI callback function. + * @hw: HW module. + * @req: IO request. + * + */ +static void +csio_scsi_cbfn(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + uint8_t scsi_status = SAM_STAT_GOOD; + uint32_t host_status = DID_OK; + + if (likely(req->wr_status == FW_SUCCESS)) { + if (req->nsge > 0) { + scsi_dma_unmap(cmnd); + if (req->dcopy) + host_status = csio_scsi_copy_to_sgl(hw, req); + } + + cmnd->result = (((host_status) << 16) | scsi_status); + cmnd->scsi_done(cmnd); + csio_scsi_cmnd(req) = NULL; + CSIO_INC_STATS(csio_hw_to_scsim(hw), n_tot_success); + } else { + /* Error handling */ + csio_scsi_err_handler(hw, req); + } +} + +/** + * csio_queuecommand - Entry point to kickstart an I/O request. + * @host: The scsi_host pointer. + * @cmnd: The I/O request from ML. + * + * This routine does the following: + * - Checks for HW and Rnode module readiness. + * - Gets a free ioreq structure (which is already initialized + * to uninit during its allocation). + * - Maps SG elements. + * - Initializes ioreq members. + * - Kicks off the SCSI state machine for this IO. + * - Returns busy status on error. + */ +static int +csio_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmnd) +{ + struct csio_lnode *ln = shost_priv(host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + struct csio_ioreq *ioreq = NULL; + unsigned long flags; + int nsge = 0; + int rv = SCSI_MLQUEUE_HOST_BUSY, nr; + int retval; + int cpu; + struct csio_scsi_qset *sqset; + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); + + if (!blk_rq_cpu_valid(cmnd->request)) + cpu = smp_processor_id(); + else + cpu = cmnd->request->cpu; + + sqset = &hw->sqset[ln->portid][cpu]; + + nr = fc_remote_port_chkready(rport); + if (nr) { + cmnd->result = nr; + CSIO_INC_STATS(scsim, n_rn_nr_error); + goto err_done; + } + + if (unlikely(!csio_is_hw_ready(hw))) { + cmnd->result = (DID_REQUEUE << 16); + CSIO_INC_STATS(scsim, n_hw_nr_error); + goto err_done; + } + + /* Get req->nsge, if there are SG elements to be mapped */ + nsge = scsi_dma_map(cmnd); + if (unlikely(nsge < 0)) { + CSIO_INC_STATS(scsim, n_dmamap_error); + goto err; + } + + /* Do we support so many mappings? */ + if (unlikely(nsge > scsim->max_sge)) { + csio_warn(hw, + "More SGEs than can be supported." + " SGEs: %d, Max SGEs: %d\n", nsge, scsim->max_sge); + CSIO_INC_STATS(scsim, n_unsupp_sge_error); + goto err_dma_unmap; + } + + /* Get a free ioreq structure - SM is already set to uninit */ + ioreq = csio_get_scsi_ioreq_lock(hw, scsim); + if (!ioreq) { + csio_err(hw, "Out of I/O request elements. Active #:%d\n", + scsim->stats.n_active); + CSIO_INC_STATS(scsim, n_no_req_error); + goto err_dma_unmap; + } + + ioreq->nsge = nsge; + ioreq->lnode = ln; + ioreq->rnode = rn; + ioreq->iq_idx = sqset->iq_idx; + ioreq->eq_idx = sqset->eq_idx; + ioreq->wr_status = 0; + ioreq->drv_status = 0; + csio_scsi_cmnd(ioreq) = (void *)cmnd; + ioreq->tmo = 0; + ioreq->datadir = cmnd->sc_data_direction; + + if (cmnd->sc_data_direction == DMA_TO_DEVICE) { + CSIO_INC_STATS(ln, n_output_requests); + ln->stats.n_output_bytes += scsi_bufflen(cmnd); + } else if (cmnd->sc_data_direction == DMA_FROM_DEVICE) { + CSIO_INC_STATS(ln, n_input_requests); + ln->stats.n_input_bytes += scsi_bufflen(cmnd); + } else + CSIO_INC_STATS(ln, n_control_requests); + + /* Set cbfn */ + ioreq->io_cbfn = csio_scsi_cbfn; + + /* Needed during abort */ + cmnd->host_scribble = (unsigned char *)ioreq; + cmnd->SCp.Message = 0; + + /* Kick off SCSI IO SM on the ioreq */ + spin_lock_irqsave(&hw->lock, flags); + retval = csio_scsi_start_io(ioreq); + spin_unlock_irqrestore(&hw->lock, flags); + + if (retval != 0) { + csio_err(hw, "ioreq: %p couldnt be started, status:%d\n", + ioreq, retval); + CSIO_INC_STATS(scsim, n_busy_error); + goto err_put_req; + } + + return 0; + +err_put_req: + csio_put_scsi_ioreq_lock(hw, scsim, ioreq); +err_dma_unmap: + if (nsge > 0) + scsi_dma_unmap(cmnd); +err: + return rv; + +err_done: + cmnd->scsi_done(cmnd); + return 0; +} + +static int +csio_do_abrt_cls(struct csio_hw *hw, struct csio_ioreq *ioreq, bool abort) +{ + int rv; + int cpu = smp_processor_id(); + struct csio_lnode *ln = ioreq->lnode; + struct csio_scsi_qset *sqset = &hw->sqset[ln->portid][cpu]; + + ioreq->tmo = CSIO_SCSI_ABRT_TMO_MS; + /* + * Use current processor queue for posting the abort/close, but retain + * the ingress queue ID of the original I/O being aborted/closed - we + * need the abort/close completion to be received on the same queue + * as the original I/O. + */ + ioreq->eq_idx = sqset->eq_idx; + + if (abort == SCSI_ABORT) + rv = csio_scsi_abort(ioreq); + else + rv = csio_scsi_close(ioreq); + + return rv; +} + +static int +csio_eh_abort_handler(struct scsi_cmnd *cmnd) +{ + struct csio_ioreq *ioreq; + struct csio_lnode *ln = shost_priv(cmnd->device->host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + int ready = 0, ret; + unsigned long tmo = 0; + int rv; + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + + ret = fc_block_scsi_eh(cmnd); + if (ret) + return ret; + + ioreq = (struct csio_ioreq *)cmnd->host_scribble; + if (!ioreq) + return SUCCESS; + + if (!rn) + return FAILED; + + csio_dbg(hw, + "Request to abort ioreq:%p cmd:%p cdb:%08llx" + " ssni:0x%x lun:%d iq:0x%x\n", + ioreq, cmnd, *((uint64_t *)cmnd->cmnd), rn->flowid, + cmnd->device->lun, csio_q_physiqid(hw, ioreq->iq_idx)); + + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) != cmnd) { + CSIO_INC_STATS(scsim, n_abrt_race_comp); + return SUCCESS; + } + + ready = csio_is_lnode_ready(ln); + tmo = CSIO_SCSI_ABRT_TMO_MS; + + spin_lock_irq(&hw->lock); + rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE)); + spin_unlock_irq(&hw->lock); + + if (rv != 0) { + if (rv == -EINVAL) { + /* Return success, if abort/close request issued on + * already completed IO + */ + return SUCCESS; + } + if (ready) + CSIO_INC_STATS(scsim, n_abrt_busy_error); + else + CSIO_INC_STATS(scsim, n_cls_busy_error); + + goto inval_scmnd; + } + + /* Wait for completion */ + init_completion(&ioreq->cmplobj); + wait_for_completion_timeout(&ioreq->cmplobj, msecs_to_jiffies(tmo)); + + /* FW didnt respond to abort within our timeout */ + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) { + + csio_err(hw, "Abort timed out -- req: %p\n", ioreq); + CSIO_INC_STATS(scsim, n_abrt_timedout); + +inval_scmnd: + if (ioreq->nsge > 0) + scsi_dma_unmap(cmnd); + + spin_lock_irq(&hw->lock); + csio_scsi_cmnd(ioreq) = NULL; + spin_unlock_irq(&hw->lock); + + cmnd->result = (DID_ERROR << 16); + cmnd->scsi_done(cmnd); + + return FAILED; + } + + /* FW successfully aborted the request */ + if (host_byte(cmnd->result) == DID_REQUEUE) { + csio_info(hw, + "Aborted SCSI command to (%d:%d) serial#:0x%lx\n", + cmnd->device->id, cmnd->device->lun, + cmnd->serial_number); + return SUCCESS; + } else { + csio_info(hw, + "Failed to abort SCSI command, (%d:%d) serial#:0x%lx\n", + cmnd->device->id, cmnd->device->lun, + cmnd->serial_number); + return FAILED; + } +} + +/* + * csio_tm_cbfn - TM callback function. + * @hw: HW module. + * @req: IO request. + * + * Cache the result in 'cmnd', since ioreq will be freed soon + * after we return from here, and the waiting thread shouldnt trust + * the ioreq contents. + */ +static void +csio_tm_cbfn(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct csio_dma_buf *dma_buf; + uint8_t flags = 0; + struct fcp_resp_with_ext *fcp_resp; + struct fcp_resp_rsp_info *rsp_info; + + csio_dbg(hw, "req: %p in csio_tm_cbfn status: %d\n", + req, req->wr_status); + + /* Cache FW return status */ + cmnd->SCp.Status = req->wr_status; + + /* Special handling based on FCP response */ + + /* + * FW returns us this error, if flags were set. FCP4 says + * FCP_RSP_LEN_VAL in flags shall be set for TM completions. + * So if a target were to set this bit, we expect that the + * rsp_code is set to FCP_TMF_CMPL for a successful TM + * completion. Any other rsp_code means TM operation failed. + * If a target were to just ignore setting flags, we treat + * the TM operation as success, and FW returns FW_SUCCESS. + */ + if (req->wr_status == FW_SCSI_RSP_ERR) { + dma_buf = &req->dma_buf; + fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr; + rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1); + + flags = fcp_resp->resp.fr_flags; + + /* Modify return status if flags indicate success */ + if (flags & FCP_RSP_LEN_VAL) + if (rsp_info->rsp_code == FCP_TMF_CMPL) + cmnd->SCp.Status = FW_SUCCESS; + + csio_dbg(hw, "TM FCP rsp code: %d\n", rsp_info->rsp_code); + } + + /* Wake up the TM handler thread */ + csio_scsi_cmnd(req) = NULL; +} + +static int +csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd) +{ + struct csio_lnode *ln = shost_priv(cmnd->device->host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + struct csio_ioreq *ioreq = NULL; + struct csio_scsi_qset *sqset; + unsigned long flags; + int retval; + int count, ret; + LIST_HEAD(local_q); + struct csio_scsi_level_data sld; + + if (!rn) + goto fail; + + csio_dbg(hw, "Request to reset LUN:%d (ssni:0x%x tgtid:%d)\n", + cmnd->device->lun, rn->flowid, rn->scsi_id); + + if (!csio_is_lnode_ready(ln)) { + csio_err(hw, + "LUN reset cannot be issued on non-ready" + " local node vnpi:0x%x (LUN:%d)\n", + ln->vnp_flowid, cmnd->device->lun); + goto fail; + } + + /* Lnode is ready, now wait on rport node readiness */ + ret = fc_block_scsi_eh(cmnd); + if (ret) + return ret; + + /* + * If we have blocked in the previous call, at this point, either the + * remote node has come back online, or device loss timer has fired + * and the remote node is destroyed. Allow the LUN reset only for + * the former case, since LUN reset is a TMF I/O on the wire, and we + * need a valid session to issue it. + */ + if (fc_remote_port_chkready(rn->rport)) { + csio_err(hw, + "LUN reset cannot be issued on non-ready" + " remote node ssni:0x%x (LUN:%d)\n", + rn->flowid, cmnd->device->lun); + goto fail; + } + + /* Get a free ioreq structure - SM is already set to uninit */ + ioreq = csio_get_scsi_ioreq_lock(hw, scsim); + + if (!ioreq) { + csio_err(hw, "Out of IO request elements. Active # :%d\n", + scsim->stats.n_active); + goto fail; + } + + sqset = &hw->sqset[ln->portid][smp_processor_id()]; + ioreq->nsge = 0; + ioreq->lnode = ln; + ioreq->rnode = rn; + ioreq->iq_idx = sqset->iq_idx; + ioreq->eq_idx = sqset->eq_idx; + + csio_scsi_cmnd(ioreq) = cmnd; + cmnd->host_scribble = (unsigned char *)ioreq; + cmnd->SCp.Status = 0; + + cmnd->SCp.Message = FCP_TMF_LUN_RESET; + ioreq->tmo = CSIO_SCSI_LUNRST_TMO_MS / 1000; + + /* + * FW times the LUN reset for ioreq->tmo, so we got to wait a little + * longer (10s for now) than that to allow FW to return the timed + * out command. + */ + count = DIV_ROUND_UP((ioreq->tmo + 10) * 1000, CSIO_SCSI_TM_POLL_MS); + + /* Set cbfn */ + ioreq->io_cbfn = csio_tm_cbfn; + + /* Save of the ioreq info for later use */ + sld.level = CSIO_LEV_LUN; + sld.lnode = ioreq->lnode; + sld.rnode = ioreq->rnode; + sld.oslun = (uint64_t)cmnd->device->lun; + + spin_lock_irqsave(&hw->lock, flags); + /* Kick off TM SM on the ioreq */ + retval = csio_scsi_start_tm(ioreq); + spin_unlock_irqrestore(&hw->lock, flags); + + if (retval != 0) { + csio_err(hw, "Failed to issue LUN reset, req:%p, status:%d\n", + ioreq, retval); + goto fail_ret_ioreq; + } + + csio_dbg(hw, "Waiting max %d secs for LUN reset completion\n", + count * (CSIO_SCSI_TM_POLL_MS / 1000)); + /* Wait for completion */ + while ((((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) + && count--) + msleep(CSIO_SCSI_TM_POLL_MS); + + /* LUN reset timed-out */ + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) { + csio_err(hw, "LUN reset (%d:%d) timed out\n", + cmnd->device->id, cmnd->device->lun); + + spin_lock_irq(&hw->lock); + csio_scsi_drvcleanup(ioreq); + list_del_init(&ioreq->sm.sm_list); + spin_unlock_irq(&hw->lock); + + goto fail_ret_ioreq; + } + + /* LUN reset returned, check cached status */ + if (cmnd->SCp.Status != FW_SUCCESS) { + csio_err(hw, "LUN reset failed (%d:%d), status: %d\n", + cmnd->device->id, cmnd->device->lun, cmnd->SCp.Status); + goto fail; + } + + /* LUN reset succeeded, Start aborting affected I/Os */ + /* + * Since the host guarantees during LUN reset that there + * will not be any more I/Os to that LUN, until the LUN reset + * completes, we gather pending I/Os after the LUN reset. + */ + spin_lock_irq(&hw->lock); + csio_scsi_gather_active_ios(scsim, &sld, &local_q); + + retval = csio_scsi_abort_io_q(scsim, &local_q, 30000); + spin_unlock_irq(&hw->lock); + + /* Aborts may have timed out */ + if (retval != 0) { + csio_err(hw, + "Attempt to abort I/Os during LUN reset of %d" + " returned %d\n", cmnd->device->lun, retval); + /* Return I/Os back to active_q */ + spin_lock_irq(&hw->lock); + list_splice_tail_init(&local_q, &scsim->active_q); + spin_unlock_irq(&hw->lock); + goto fail; + } + + CSIO_INC_STATS(rn, n_lun_rst); + + csio_info(hw, "LUN reset occurred (%d:%d)\n", + cmnd->device->id, cmnd->device->lun); + + return SUCCESS; + +fail_ret_ioreq: + csio_put_scsi_ioreq_lock(hw, scsim, ioreq); +fail: + CSIO_INC_STATS(rn, n_lun_rst_fail); + return FAILED; +} + +static int +csio_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + sdev->hostdata = *((struct csio_lnode **)(rport->dd_data)); + + return 0; +} + +static int +csio_slave_configure(struct scsi_device *sdev) +{ + if (sdev->tagged_supported) + scsi_activate_tcq(sdev, csio_lun_qdepth); + else + scsi_deactivate_tcq(sdev, csio_lun_qdepth); + + return 0; +} + +static void +csio_slave_destroy(struct scsi_device *sdev) +{ + sdev->hostdata = NULL; +} + +static int +csio_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct csio_lnode *ln = shost_priv(shost); + int rv = 1; + + spin_lock_irq(shost->host_lock); + if (!ln->hwp || csio_list_deleted(&ln->sm.sm_list)) + goto out; + + rv = csio_scan_done(ln, jiffies, time, csio_max_scan_tmo * HZ, + csio_delta_scan_tmo * HZ); +out: + spin_unlock_irq(shost->host_lock); + + return rv; +} + +struct scsi_host_template csio_fcoe_shost_template = { + .module = THIS_MODULE, + .name = CSIO_DRV_DESC, + .proc_name = KBUILD_MODNAME, + .queuecommand = csio_queuecommand, + .eh_abort_handler = csio_eh_abort_handler, + .eh_device_reset_handler = csio_eh_lun_reset_handler, + .slave_alloc = csio_slave_alloc, + .slave_configure = csio_slave_configure, + .slave_destroy = csio_slave_destroy, + .scan_finished = csio_scan_finished, + .this_id = -1, + .sg_tablesize = CSIO_SCSI_MAX_SGE, + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = csio_fcoe_lport_attrs, + .max_sectors = CSIO_MAX_SECTOR_SIZE, +}; + +struct scsi_host_template csio_fcoe_shost_vport_template = { + .module = THIS_MODULE, + .name = CSIO_DRV_DESC, + .proc_name = KBUILD_MODNAME, + .queuecommand = csio_queuecommand, + .eh_abort_handler = csio_eh_abort_handler, + .eh_device_reset_handler = csio_eh_lun_reset_handler, + .slave_alloc = csio_slave_alloc, + .slave_configure = csio_slave_configure, + .slave_destroy = csio_slave_destroy, + .scan_finished = csio_scan_finished, + .this_id = -1, + .sg_tablesize = CSIO_SCSI_MAX_SGE, + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = csio_fcoe_vport_attrs, + .max_sectors = CSIO_MAX_SECTOR_SIZE, +}; + +/* + * csio_scsi_alloc_ddp_bufs - Allocate buffers for DDP of unaligned SGLs. + * @scm: SCSI Module + * @hw: HW device. + * @buf_size: buffer size + * @num_buf : Number of buffers. + * + * This routine allocates DMA buffers required for SCSI Data xfer, if + * each SGL buffer for a SCSI Read request posted by SCSI midlayer are + * not virtually contiguous. + */ +static int +csio_scsi_alloc_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw, + int buf_size, int num_buf) +{ + int n = 0; + struct list_head *tmp; + struct csio_dma_buf *ddp_desc = NULL; + uint32_t unit_size = 0; + + if (!num_buf) + return 0; + + if (!buf_size) + return -EINVAL; + + INIT_LIST_HEAD(&scm->ddp_freelist); + + /* Align buf size to page size */ + buf_size = (buf_size + PAGE_SIZE - 1) & PAGE_MASK; + /* Initialize dma descriptors */ + for (n = 0; n < num_buf; n++) { + /* Set unit size to request size */ + unit_size = buf_size; + ddp_desc = kzalloc(sizeof(struct csio_dma_buf), GFP_KERNEL); + if (!ddp_desc) { + csio_err(hw, + "Failed to allocate ddp descriptors," + " Num allocated = %d.\n", + scm->stats.n_free_ddp); + goto no_mem; + } + + /* Allocate Dma buffers for DDP */ + ddp_desc->vaddr = pci_alloc_consistent(hw->pdev, unit_size, + &ddp_desc->paddr); + if (!ddp_desc->vaddr) { + csio_err(hw, + "SCSI response DMA buffer (ddp) allocation" + " failed!\n"); + kfree(ddp_desc); + goto no_mem; + } + + ddp_desc->len = unit_size; + + /* Added it to scsi ddp freelist */ + list_add_tail(&ddp_desc->list, &scm->ddp_freelist); + CSIO_INC_STATS(scm, n_free_ddp); + } + + return 0; +no_mem: + /* release dma descs back to freelist and free dma memory */ + list_for_each(tmp, &scm->ddp_freelist) { + ddp_desc = (struct csio_dma_buf *) tmp; + tmp = csio_list_prev(tmp); + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr, + ddp_desc->paddr); + list_del_init(&ddp_desc->list); + kfree(ddp_desc); + } + scm->stats.n_free_ddp = 0; + + return -ENOMEM; +} + +/* + * csio_scsi_free_ddp_bufs - free DDP buffers of unaligned SGLs. + * @scm: SCSI Module + * @hw: HW device. + * + * This routine frees ddp buffers. + */ +static void +csio_scsi_free_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw) +{ + struct list_head *tmp; + struct csio_dma_buf *ddp_desc; + + /* release dma descs back to freelist and free dma memory */ + list_for_each(tmp, &scm->ddp_freelist) { + ddp_desc = (struct csio_dma_buf *) tmp; + tmp = csio_list_prev(tmp); + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr, + ddp_desc->paddr); + list_del_init(&ddp_desc->list); + kfree(ddp_desc); + } + scm->stats.n_free_ddp = 0; +} + +/** + * csio_scsim_init - Initialize SCSI Module + * @scm: SCSI Module + * @hw: HW module + * + */ +int +csio_scsim_init(struct csio_scsim *scm, struct csio_hw *hw) +{ + int i; + struct csio_ioreq *ioreq; + struct csio_dma_buf *dma_buf; + + INIT_LIST_HEAD(&scm->active_q); + scm->hw = hw; + + scm->proto_cmd_len = sizeof(struct fcp_cmnd); + scm->proto_rsp_len = CSIO_SCSI_RSP_LEN; + scm->max_sge = CSIO_SCSI_MAX_SGE; + + spin_lock_init(&scm->freelist_lock); + + /* Pre-allocate ioreqs and initialize them */ + INIT_LIST_HEAD(&scm->ioreq_freelist); + for (i = 0; i < csio_scsi_ioreqs; i++) { + + ioreq = kzalloc(sizeof(struct csio_ioreq), GFP_KERNEL); + if (!ioreq) { + csio_err(hw, + "I/O request element allocation failed, " + " Num allocated = %d.\n", + scm->stats.n_free_ioreq); + + goto free_ioreq; + } + + /* Allocate Dma buffers for Response Payload */ + dma_buf = &ioreq->dma_buf; + dma_buf->vaddr = pci_pool_alloc(hw->scsi_pci_pool, GFP_KERNEL, + &dma_buf->paddr); + if (!dma_buf->vaddr) { + csio_err(hw, + "SCSI response DMA buffer allocation" + " failed!\n"); + kfree(ioreq); + goto free_ioreq; + } + + dma_buf->len = scm->proto_rsp_len; + + /* Set state to uninit */ + csio_init_state(&ioreq->sm, csio_scsis_uninit); + INIT_LIST_HEAD(&ioreq->gen_list); + init_completion(&ioreq->cmplobj); + + list_add_tail(&ioreq->sm.sm_list, &scm->ioreq_freelist); + CSIO_INC_STATS(scm, n_free_ioreq); + } + + if (csio_scsi_alloc_ddp_bufs(scm, hw, PAGE_SIZE, csio_ddp_descs)) + goto free_ioreq; + + return 0; + +free_ioreq: + /* + * Free up existing allocations, since an error + * from here means we are returning for good + */ + while (!list_empty(&scm->ioreq_freelist)) { + struct csio_sm *tmp; + + tmp = list_first_entry(&scm->ioreq_freelist, + struct csio_sm, sm_list); + list_del_init(&tmp->sm_list); + ioreq = (struct csio_ioreq *)tmp; + + dma_buf = &ioreq->dma_buf; + pci_pool_free(hw->scsi_pci_pool, dma_buf->vaddr, + dma_buf->paddr); + + kfree(ioreq); + } + + scm->stats.n_free_ioreq = 0; + + return -ENOMEM; +} + +/** + * csio_scsim_exit: Uninitialize SCSI Module + * @scm: SCSI Module + * + */ +void +csio_scsim_exit(struct csio_scsim *scm) +{ + struct csio_ioreq *ioreq; + struct csio_dma_buf *dma_buf; + + while (!list_empty(&scm->ioreq_freelist)) { + struct csio_sm *tmp; + + tmp = list_first_entry(&scm->ioreq_freelist, + struct csio_sm, sm_list); + list_del_init(&tmp->sm_list); + ioreq = (struct csio_ioreq *)tmp; + + dma_buf = &ioreq->dma_buf; + pci_pool_free(scm->hw->scsi_pci_pool, dma_buf->vaddr, + dma_buf->paddr); + + kfree(ioreq); + } + + scm->stats.n_free_ioreq = 0; + + csio_scsi_free_ddp_bufs(scm, scm->hw); +} diff --git a/drivers/scsi/csiostor/csio_scsi.h b/drivers/scsi/csiostor/csio_scsi.h new file mode 100644 index 0000000..2257c3d --- /dev/null +++ b/drivers/scsi/csiostor/csio_scsi.h @@ -0,0 +1,342 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_SCSI_H__ +#define __CSIO_SCSI_H__ + +#include <linux/spinlock_types.h> +#include <linux/completion.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_tcq.h> +#include <scsi/fc/fc_fcp.h> + +#include "csio_defs.h" +#include "csio_wr.h" + +extern struct scsi_host_template csio_fcoe_shost_template; +extern struct scsi_host_template csio_fcoe_shost_vport_template; + +extern int csio_scsi_eqsize; +extern int csio_scsi_iqlen; +extern int csio_scsi_ioreqs; +extern uint32_t csio_max_scan_tmo; +extern uint32_t csio_delta_scan_tmo; +extern int csio_lun_qdepth; + +/* + **************************** NOTE ******************************* + * How do we calculate MAX FCoE SCSI SGEs? Here is the math: + * Max Egress WR size = 512 bytes + * One SCSI egress WR has the following fixed no of bytes: + * 48 (sizeof(struct fw_scsi_write[read]_wr)) - FW WR + * + 32 (sizeof(struct fc_fcp_cmnd)) - Immediate FCP_CMD + * ------ + * 80 + * ------ + * That leaves us with 512 - 96 = 432 bytes for data SGE. Using + * struct ulptx_sgl header for the SGE consumes: + * - 4 bytes for cmnd_sge. + * - 12 bytes for the first SGL. + * That leaves us with 416 bytes for the remaining SGE pairs. Which is + * is 416 / 24 (size(struct ulptx_sge_pair)) = 17 SGE pairs, + * or 34 SGEs. Adding the first SGE fetches us 35 SGEs. + */ +#define CSIO_SCSI_MAX_SGE 35 +#define CSIO_SCSI_ABRT_TMO_MS 60000 +#define CSIO_SCSI_LUNRST_TMO_MS 60000 +#define CSIO_SCSI_TM_POLL_MS 2000 /* should be less than + * all TM timeouts. + */ +#define CSIO_SCSI_IQ_WRSZ 128 +#define CSIO_SCSI_IQSIZE (csio_scsi_iqlen * CSIO_SCSI_IQ_WRSZ) + +#define CSIO_MAX_SNS_LEN 128 +#define CSIO_SCSI_RSP_LEN (FCP_RESP_WITH_EXT + 4 + CSIO_MAX_SNS_LEN) + +/* Reference to scsi_cmnd */ +#define csio_scsi_cmnd(req) ((req)->scratch1) + +struct csio_scsi_stats { + uint64_t n_tot_success; /* Total number of good I/Os */ + uint32_t n_rn_nr_error; /* No. of remote-node-not- + * ready errors + */ + uint32_t n_hw_nr_error; /* No. of hw-module-not- + * ready errors + */ + uint32_t n_dmamap_error; /* No. of DMA map erros */ + uint32_t n_unsupp_sge_error; /* No. of too-many-SGes + * errors. + */ + uint32_t n_no_req_error; /* No. of Out-of-ioreqs error */ + uint32_t n_busy_error; /* No. of -EBUSY errors */ + uint32_t n_hosterror; /* No. of FW_HOSTERROR I/O */ + uint32_t n_rsperror; /* No. of response errors */ + uint32_t n_autosense; /* No. of auto sense replies */ + uint32_t n_ovflerror; /* No. of overflow errors */ + uint32_t n_unflerror; /* No. of underflow errors */ + uint32_t n_rdev_nr_error;/* No. of rdev not + * ready errors + */ + uint32_t n_rdev_lost_error;/* No. of rdev lost errors */ + uint32_t n_rdev_logo_error;/* No. of rdev logo errors */ + uint32_t n_link_down_error;/* No. of link down errors */ + uint32_t n_no_xchg_error; /* No. no exchange error */ + uint32_t n_unknown_error;/* No. of unhandled errors */ + uint32_t n_aborted; /* No. of aborted I/Os */ + uint32_t n_abrt_timedout; /* No. of abort timedouts */ + uint32_t n_abrt_fail; /* No. of abort failures */ + uint32_t n_abrt_dups; /* No. of duplicate aborts */ + uint32_t n_abrt_race_comp; /* No. of aborts that raced + * with completions. + */ + uint32_t n_abrt_busy_error;/* No. of abort failures + * due to -EBUSY. + */ + uint32_t n_closed; /* No. of closed I/Os */ + uint32_t n_cls_busy_error; /* No. of close failures + * due to -EBUSY. + */ + uint32_t n_active; /* No. of IOs in active_q */ + uint32_t n_tm_active; /* No. of TMs in active_q */ + uint32_t n_wcbfn; /* No. of I/Os in worker + * cbfn q + */ + uint32_t n_free_ioreq; /* No. of freelist entries */ + uint32_t n_free_ddp; /* No. of DDP freelist */ + uint32_t n_unaligned; /* No. of Unaligned SGls */ + uint32_t n_inval_cplop; /* No. invalid CPL op's in IQ */ + uint32_t n_inval_scsiop; /* No. invalid scsi op's in IQ*/ +}; + +struct csio_scsim { + struct csio_hw *hw; /* Pointer to HW moduel */ + uint8_t max_sge; /* Max SGE */ + uint8_t proto_cmd_len; /* Proto specific SCSI + * cmd length + */ + uint16_t proto_rsp_len; /* Proto specific SCSI + * response length + */ + spinlock_t freelist_lock; /* Lock for ioreq freelist */ + struct list_head active_q; /* Outstanding SCSI I/Os */ + struct list_head ioreq_freelist; /* Free list of ioreq's */ + struct list_head ddp_freelist; /* DDP descriptor freelist */ + struct csio_scsi_stats stats; /* This module's statistics */ +}; + +/* State machine defines */ +enum csio_scsi_ev { + CSIO_SCSIE_START_IO = 1, /* Start a regular SCSI IO */ + CSIO_SCSIE_START_TM, /* Start a TM IO */ + CSIO_SCSIE_COMPLETED, /* IO Completed */ + CSIO_SCSIE_ABORT, /* Abort IO */ + CSIO_SCSIE_ABORTED, /* IO Aborted */ + CSIO_SCSIE_CLOSE, /* Close exchange */ + CSIO_SCSIE_CLOSED, /* Exchange closed */ + CSIO_SCSIE_DRVCLEANUP, /* Driver wants to manually + * cleanup this I/O. + */ +}; + +enum csio_scsi_lev { + CSIO_LEV_ALL = 1, + CSIO_LEV_LNODE, + CSIO_LEV_RNODE, + CSIO_LEV_LUN, +}; + +struct csio_scsi_level_data { + enum csio_scsi_lev level; + struct csio_rnode *rnode; + struct csio_lnode *lnode; + uint64_t oslun; +}; + +static inline struct csio_ioreq * +csio_get_scsi_ioreq(struct csio_scsim *scm) +{ + struct csio_sm *req; + + if (likely(!list_empty(&scm->ioreq_freelist))) { + req = list_first_entry(&scm->ioreq_freelist, + struct csio_sm, sm_list); + list_del_init(&req->sm_list); + CSIO_DEC_STATS(scm, n_free_ioreq); + return (struct csio_ioreq *)req; + } else + return NULL; +} + +static inline void +csio_put_scsi_ioreq(struct csio_scsim *scm, struct csio_ioreq *ioreq) +{ + list_add_tail(&ioreq->sm.sm_list, &scm->ioreq_freelist); + CSIO_INC_STATS(scm, n_free_ioreq); +} + +static inline void +csio_put_scsi_ioreq_list(struct csio_scsim *scm, struct list_head *reqlist, + int n) +{ + list_splice_init(reqlist, &scm->ioreq_freelist); + scm->stats.n_free_ioreq += n; +} + +static inline struct csio_dma_buf * +csio_get_scsi_ddp(struct csio_scsim *scm) +{ + struct csio_dma_buf *ddp; + + if (likely(!list_empty(&scm->ddp_freelist))) { + ddp = list_first_entry(&scm->ddp_freelist, + struct csio_dma_buf, list); + list_del_init(&ddp->list); + CSIO_DEC_STATS(scm, n_free_ddp); + return ddp; + } else + return NULL; +} + +static inline void +csio_put_scsi_ddp(struct csio_scsim *scm, struct csio_dma_buf *ddp) +{ + list_add_tail(&ddp->list, &scm->ddp_freelist); + CSIO_INC_STATS(scm, n_free_ddp); +} + +static inline void +csio_put_scsi_ddp_list(struct csio_scsim *scm, struct list_head *reqlist, + int n) +{ + list_splice_tail_init(reqlist, &scm->ddp_freelist); + scm->stats.n_free_ddp += n; +} + +static inline void +csio_scsi_completed(struct csio_ioreq *ioreq, struct list_head *cbfn_q) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_COMPLETED); + if (csio_list_deleted(&ioreq->sm.sm_list)) + list_add_tail(&ioreq->sm.sm_list, cbfn_q); +} + +static inline void +csio_scsi_aborted(struct csio_ioreq *ioreq, struct list_head *cbfn_q) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_ABORTED); + list_add_tail(&ioreq->sm.sm_list, cbfn_q); +} + +static inline void +csio_scsi_closed(struct csio_ioreq *ioreq, struct list_head *cbfn_q) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_CLOSED); + list_add_tail(&ioreq->sm.sm_list, cbfn_q); +} + +static inline void +csio_scsi_drvcleanup(struct csio_ioreq *ioreq) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_DRVCLEANUP); +} + +/* + * csio_scsi_start_io - Kick starts the IO SM. + * @req: io request SM. + * + * needs to be called with lock held. + */ +static inline int +csio_scsi_start_io(struct csio_ioreq *ioreq) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_START_IO); + return ioreq->drv_status; +} + +/* + * csio_scsi_start_tm - Kicks off the Task management IO SM. + * @req: io request SM. + * + * needs to be called with lock held. + */ +static inline int +csio_scsi_start_tm(struct csio_ioreq *ioreq) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_START_TM); + return ioreq->drv_status; +} + +/* + * csio_scsi_abort - Abort an IO request + * @req: io request SM. + * + * needs to be called with lock held. + */ +static inline int +csio_scsi_abort(struct csio_ioreq *ioreq) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_ABORT); + return ioreq->drv_status; +} + +/* + * csio_scsi_close - Close an IO request + * @req: io request SM. + * + * needs to be called with lock held. + */ +static inline int +csio_scsi_close(struct csio_ioreq *ioreq) +{ + csio_post_event(&ioreq->sm, CSIO_SCSIE_CLOSE); + return ioreq->drv_status; +} + +void csio_scsi_cleanup_io_q(struct csio_scsim *, struct list_head *); +int csio_scsim_cleanup_io(struct csio_scsim *, bool abort); +int csio_scsim_cleanup_io_lnode(struct csio_scsim *, + struct csio_lnode *); +struct csio_ioreq *csio_scsi_cmpl_handler(struct csio_hw *, void *, uint32_t, + struct csio_fl_dma_buf *, + void *, uint8_t **); +int csio_scsi_qconfig(struct csio_hw *); +int csio_scsim_init(struct csio_scsim *, struct csio_hw *); +void csio_scsim_exit(struct csio_scsim *); + +#endif /* __CSIO_SCSI_H__ */ diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c new file mode 100644 index 0000000..c32df1b --- /dev/null +++ b/drivers/scsi/csiostor/csio_wr.c @@ -0,0 +1,1632 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/compiler.h> +#include <linux/slab.h> +#include <asm/page.h> +#include <linux/cache.h> + +#include "csio_hw.h" +#include "csio_wr.h" +#include "csio_mb.h" +#include "csio_defs.h" + +int csio_intr_coalesce_cnt; /* value:SGE_INGRESS_RX_THRESHOLD[0] */ +static int csio_sge_thresh_reg; /* SGE_INGRESS_RX_THRESHOLD[0] */ + +int csio_intr_coalesce_time = 10; /* value:SGE_TIMER_VALUE_1 */ +static int csio_sge_timer_reg = 1; + +#define CSIO_SET_FLBUF_SIZE(_hw, _reg, _val) \ + csio_wr_reg32((_hw), (_val), SGE_FL_BUFFER_SIZE##_reg) + +static void +csio_get_flbuf_size(struct csio_hw *hw, struct csio_sge *sge, uint32_t reg) +{ + sge->sge_fl_buf_size[reg] = csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE0 + + reg * sizeof(uint32_t)); +} + +/* Free list buffer size */ +static inline uint32_t +csio_wr_fl_bufsz(struct csio_sge *sge, struct csio_dma_buf *buf) +{ + return sge->sge_fl_buf_size[buf->paddr & 0xF]; +} + +/* Size of the egress queue status page */ +static inline uint32_t +csio_wr_qstat_pgsz(struct csio_hw *hw) +{ + return (hw->wrm.sge.sge_control & EGRSTATUSPAGESIZE(1)) ? 128 : 64; +} + +/* Ring freelist doorbell */ +static inline void +csio_wr_ring_fldb(struct csio_hw *hw, struct csio_q *flq) +{ + /* + * Ring the doorbell only when we have atleast CSIO_QCREDIT_SZ + * number of bytes in the freelist queue. This translates to atleast + * 8 freelist buffer pointers (since each pointer is 8 bytes). + */ + if (flq->inc_idx >= 8) { + csio_wr_reg32(hw, DBPRIO(1) | QID(flq->un.fl.flid) | + PIDX(flq->inc_idx / 8), + MYPF_REG(SGE_PF_KDOORBELL)); + flq->inc_idx &= 7; + } +} + +/* Write a 0 cidx increment value to enable SGE interrupts for this queue */ +static void +csio_wr_sge_intr_enable(struct csio_hw *hw, uint16_t iqid) +{ + csio_wr_reg32(hw, CIDXINC(0) | + INGRESSQID(iqid) | + TIMERREG(X_TIMERREG_RESTART_COUNTER), + MYPF_REG(SGE_PF_GTS)); +} + +/* + * csio_wr_fill_fl - Populate the FL buffers of a FL queue. + * @hw: HW module. + * @flq: Freelist queue. + * + * Fill up freelist buffer entries with buffers of size specified + * in the size register. + * + */ +static int +csio_wr_fill_fl(struct csio_hw *hw, struct csio_q *flq) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + __be64 *d = (__be64 *)(flq->vstart); + struct csio_dma_buf *buf = &flq->un.fl.bufs[0]; + uint64_t paddr; + int sreg = flq->un.fl.sreg; + int n = flq->credits; + + while (n--) { + buf->len = sge->sge_fl_buf_size[sreg]; + buf->vaddr = pci_alloc_consistent(hw->pdev, buf->len, + &buf->paddr); + if (!buf->vaddr) { + csio_err(hw, "Could only fill %d buffers!\n", n + 1); + return -ENOMEM; + } + + paddr = buf->paddr | (sreg & 0xF); + + *d++ = cpu_to_be64(paddr); + buf++; + } + + return 0; +} + +/* + * csio_wr_update_fl - + * @hw: HW module. + * @flq: Freelist queue. + * + * + */ +static inline void +csio_wr_update_fl(struct csio_hw *hw, struct csio_q *flq, uint16_t n) +{ + + flq->inc_idx += n; + flq->pidx += n; + if (unlikely(flq->pidx >= flq->credits)) + flq->pidx -= (uint16_t)flq->credits; + + CSIO_INC_STATS(flq, n_flq_refill); +} + +/* + * csio_wr_alloc_q - Allocate a WR queue and initialize it. + * @hw: HW module + * @qsize: Size of the queue in bytes + * @wrsize: Since of WR in this queue, if fixed. + * @type: Type of queue (Ingress/Egress/Freelist) + * @owner: Module that owns this queue. + * @nflb: Number of freelist buffers for FL. + * @sreg: What is the FL buffer size register? + * @iq_int_handler: Ingress queue handler in INTx mode. + * + * This function allocates and sets up a queue for the caller + * of size qsize, aligned at the required boundary. This is subject to + * be free entries being available in the queue array. If one is found, + * it is initialized with the allocated queue, marked as being used (owner), + * and a handle returned to the caller in form of the queue's index + * into the q_arr array. + * If user has indicated a freelist (by specifying nflb > 0), create + * another queue (with its own index into q_arr) for the freelist. Allocate + * memory for DMA buffer metadata (vaddr, len etc). Save off the freelist + * idx in the ingress queue's flq.idx. This is how a Freelist is associated + * with its owning ingress queue. + */ +int +csio_wr_alloc_q(struct csio_hw *hw, uint32_t qsize, uint32_t wrsize, + uint16_t type, void *owner, uint32_t nflb, int sreg, + iq_handler_t iq_intx_handler) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_q *q, *flq; + int free_idx = wrm->free_qidx; + int ret_idx = free_idx; + uint32_t qsz; + int flq_idx; + + if (free_idx >= wrm->num_q) { + csio_err(hw, "No more free queues.\n"); + return -1; + } + + switch (type) { + case CSIO_EGRESS: + qsz = ALIGN(qsize, CSIO_QCREDIT_SZ) + csio_wr_qstat_pgsz(hw); + break; + case CSIO_INGRESS: + switch (wrsize) { + case 16: + case 32: + case 64: + case 128: + break; + default: + csio_err(hw, "Invalid Ingress queue WR size:%d\n", + wrsize); + return -1; + } + + /* + * Number of elements must be a multiple of 16 + * So this includes status page size + */ + qsz = ALIGN(qsize/wrsize, 16) * wrsize; + + break; + case CSIO_FREELIST: + qsz = ALIGN(qsize/wrsize, 8) * wrsize + csio_wr_qstat_pgsz(hw); + break; + default: + csio_err(hw, "Invalid queue type: 0x%x\n", type); + return -1; + } + + q = wrm->q_arr[free_idx]; + + q->vstart = pci_alloc_consistent(hw->pdev, qsz, &q->pstart); + if (!q->vstart) { + csio_err(hw, + "Failed to allocate DMA memory for " + "queue at id: %d size: %d\n", free_idx, qsize); + return -1; + } + + /* + * We need to zero out the contents, importantly for ingress, + * since we start with a generatiom bit of 1 for ingress. + */ + memset(q->vstart, 0, qsz); + + q->type = type; + q->owner = owner; + q->pidx = q->cidx = q->inc_idx = 0; + q->size = qsz; + q->wr_sz = wrsize; /* If using fixed size WRs */ + + wrm->free_qidx++; + + if (type == CSIO_INGRESS) { + /* Since queue area is set to zero */ + q->un.iq.genbit = 1; + + /* + * Ingress queue status page size is always the size of + * the ingress queue entry. + */ + q->credits = (qsz - q->wr_sz) / q->wr_sz; + q->vwrap = (void *)((uintptr_t)(q->vstart) + qsz + - q->wr_sz); + + /* Allocate memory for FL if requested */ + if (nflb > 0) { + flq_idx = csio_wr_alloc_q(hw, nflb * sizeof(__be64), + sizeof(__be64), CSIO_FREELIST, + owner, 0, sreg, NULL); + if (flq_idx == -1) { + csio_err(hw, + "Failed to allocate FL queue" + " for IQ idx:%d\n", free_idx); + return -1; + } + + /* Associate the new FL with the Ingress quue */ + q->un.iq.flq_idx = flq_idx; + + flq = wrm->q_arr[q->un.iq.flq_idx]; + flq->un.fl.bufs = kzalloc(flq->credits * + sizeof(struct csio_dma_buf), + GFP_KERNEL); + if (!flq->un.fl.bufs) { + csio_err(hw, + "Failed to allocate FL queue bufs" + " for IQ idx:%d\n", free_idx); + return -1; + } + + flq->un.fl.packen = 0; + flq->un.fl.offset = 0; + flq->un.fl.sreg = sreg; + + /* Fill up the free list buffers */ + if (csio_wr_fill_fl(hw, flq)) + return -1; + + /* + * Make sure in a FLQ, atleast 1 credit (8 FL buffers) + * remains unpopulated,otherwise HW thinks + * FLQ is empty. + */ + flq->pidx = flq->inc_idx = flq->credits - 8; + } else { + q->un.iq.flq_idx = -1; + } + + /* Associate the IQ INTx handler. */ + q->un.iq.iq_intx_handler = iq_intx_handler; + + csio_q_iqid(hw, ret_idx) = CSIO_MAX_QID; + + } else if (type == CSIO_EGRESS) { + q->credits = (qsz - csio_wr_qstat_pgsz(hw)) / CSIO_QCREDIT_SZ; + q->vwrap = (void *)((uintptr_t)(q->vstart) + qsz + - csio_wr_qstat_pgsz(hw)); + csio_q_eqid(hw, ret_idx) = CSIO_MAX_QID; + } else { /* Freelist */ + q->credits = (qsz - csio_wr_qstat_pgsz(hw)) / sizeof(__be64); + q->vwrap = (void *)((uintptr_t)(q->vstart) + qsz + - csio_wr_qstat_pgsz(hw)); + csio_q_flid(hw, ret_idx) = CSIO_MAX_QID; + } + + return ret_idx; +} + +/* + * csio_wr_iq_create_rsp - Response handler for IQ creation. + * @hw: The HW module. + * @mbp: Mailbox. + * @iq_idx: Ingress queue that got created. + * + * Handle FW_IQ_CMD mailbox completion. Save off the assigned IQ/FL ids. + */ +static int +csio_wr_iq_create_rsp(struct csio_hw *hw, struct csio_mb *mbp, int iq_idx) +{ + struct csio_iq_params iqp; + enum fw_retval retval; + uint32_t iq_id; + int flq_idx; + + memset(&iqp, 0, sizeof(struct csio_iq_params)); + + csio_mb_iq_alloc_write_rsp(hw, mbp, &retval, &iqp); + + if (retval != FW_SUCCESS) { + csio_err(hw, "IQ cmd returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_q_iqid(hw, iq_idx) = iqp.iqid; + csio_q_physiqid(hw, iq_idx) = iqp.physiqid; + csio_q_pidx(hw, iq_idx) = csio_q_cidx(hw, iq_idx) = 0; + csio_q_inc_idx(hw, iq_idx) = 0; + + /* Actual iq-id. */ + iq_id = iqp.iqid - hw->wrm.fw_iq_start; + + /* Set the iq-id to iq map table. */ + if (iq_id >= CSIO_MAX_IQ) { + csio_err(hw, + "Exceeding MAX_IQ(%d) supported!" + " iqid:%d rel_iqid:%d FW iq_start:%d\n", + CSIO_MAX_IQ, iq_id, iqp.iqid, hw->wrm.fw_iq_start); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + csio_q_set_intr_map(hw, iq_idx, iq_id); + + /* + * During FW_IQ_CMD, FW sets interrupt_sent bit to 1 in the SGE + * ingress context of this queue. This will block interrupts to + * this queue until the next GTS write. Therefore, we do a + * 0-cidx increment GTS write for this queue just to clear the + * interrupt_sent bit. This will re-enable interrupts to this + * queue. + */ + csio_wr_sge_intr_enable(hw, iqp.physiqid); + + flq_idx = csio_q_iq_flq_idx(hw, iq_idx); + if (flq_idx != -1) { + struct csio_q *flq = hw->wrm.q_arr[flq_idx]; + + csio_q_flid(hw, flq_idx) = iqp.fl0id; + csio_q_cidx(hw, flq_idx) = 0; + csio_q_pidx(hw, flq_idx) = csio_q_credits(hw, flq_idx) - 8; + csio_q_inc_idx(hw, flq_idx) = csio_q_credits(hw, flq_idx) - 8; + + /* Now update SGE about the buffers allocated during init */ + csio_wr_ring_fldb(hw, flq); + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_wr_iq_create - Configure an Ingress queue with FW. + * @hw: The HW module. + * @priv: Private data object. + * @iq_idx: Ingress queue index in the WR module. + * @vec: MSIX vector. + * @portid: PCIE Channel to be associated with this queue. + * @async: Is this a FW asynchronous message handling queue? + * @cbfn: Completion callback. + * + * This API configures an ingress queue with FW by issuing a FW_IQ_CMD mailbox + * with alloc/write bits set. + */ +int +csio_wr_iq_create(struct csio_hw *hw, void *priv, int iq_idx, + uint32_t vec, uint8_t portid, bool async, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct csio_mb *mbp; + struct csio_iq_params iqp; + int flq_idx; + + memset(&iqp, 0, sizeof(struct csio_iq_params)); + csio_q_portid(hw, iq_idx) = portid; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + csio_err(hw, "IQ command out of memory!\n"); + return -ENOMEM; + } + + switch (hw->intr_mode) { + case CSIO_IM_INTX: + case CSIO_IM_MSI: + /* For interrupt forwarding queue only */ + if (hw->intr_iq_idx == iq_idx) + iqp.iqandst = X_INTERRUPTDESTINATION_PCIE; + else + iqp.iqandst = X_INTERRUPTDESTINATION_IQ; + iqp.iqandstindex = + csio_q_physiqid(hw, hw->intr_iq_idx); + break; + case CSIO_IM_MSIX: + iqp.iqandst = X_INTERRUPTDESTINATION_PCIE; + iqp.iqandstindex = (uint16_t)vec; + break; + case CSIO_IM_NONE: + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* Pass in the ingress queue cmd parameters */ + iqp.pfn = hw->pfn; + iqp.vfn = 0; + iqp.iq_start = 1; + iqp.viid = 0; + iqp.type = FW_IQ_TYPE_FL_INT_CAP; + iqp.iqasynch = async; + if (csio_intr_coalesce_cnt) + iqp.iqanus = X_UPDATESCHEDULING_COUNTER_OPTTIMER; + else + iqp.iqanus = X_UPDATESCHEDULING_TIMER; + iqp.iqanud = X_UPDATEDELIVERY_INTERRUPT; + iqp.iqpciech = portid; + iqp.iqintcntthresh = (uint8_t)csio_sge_thresh_reg; + + switch (csio_q_wr_sz(hw, iq_idx)) { + case 16: + iqp.iqesize = 0; break; + case 32: + iqp.iqesize = 1; break; + case 64: + iqp.iqesize = 2; break; + case 128: + iqp.iqesize = 3; break; + } + + iqp.iqsize = csio_q_size(hw, iq_idx) / + csio_q_wr_sz(hw, iq_idx); + iqp.iqaddr = csio_q_pstart(hw, iq_idx); + + flq_idx = csio_q_iq_flq_idx(hw, iq_idx); + if (flq_idx != -1) { + struct csio_q *flq = hw->wrm.q_arr[flq_idx]; + + iqp.fl0paden = 1; + iqp.fl0packen = flq->un.fl.packen ? 1 : 0; + iqp.fl0fbmin = X_FETCHBURSTMIN_64B; + iqp.fl0fbmax = X_FETCHBURSTMAX_512B; + iqp.fl0size = csio_q_size(hw, flq_idx) / CSIO_QCREDIT_SZ; + iqp.fl0addr = csio_q_pstart(hw, flq_idx); + } + + csio_mb_iq_alloc_write(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &iqp, cbfn); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of IQ cmd failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + if (cbfn != NULL) + return 0; + + return csio_wr_iq_create_rsp(hw, mbp, iq_idx); +} + +/* + * csio_wr_eq_create_rsp - Response handler for EQ creation. + * @hw: The HW module. + * @mbp: Mailbox. + * @eq_idx: Egress queue that got created. + * + * Handle FW_EQ_OFLD_CMD mailbox completion. Save off the assigned EQ ids. + */ +static int +csio_wr_eq_cfg_rsp(struct csio_hw *hw, struct csio_mb *mbp, int eq_idx) +{ + struct csio_eq_params eqp; + enum fw_retval retval; + + memset(&eqp, 0, sizeof(struct csio_eq_params)); + + csio_mb_eq_ofld_alloc_write_rsp(hw, mbp, &retval, &eqp); + + if (retval != FW_SUCCESS) { + csio_err(hw, "EQ OFLD cmd returned 0x%x!\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_q_eqid(hw, eq_idx) = (uint16_t)eqp.eqid; + csio_q_physeqid(hw, eq_idx) = (uint16_t)eqp.physeqid; + csio_q_pidx(hw, eq_idx) = csio_q_cidx(hw, eq_idx) = 0; + csio_q_inc_idx(hw, eq_idx) = 0; + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_wr_eq_create - Configure an Egress queue with FW. + * @hw: HW module. + * @priv: Private data. + * @eq_idx: Egress queue index in the WR module. + * @iq_idx: Associated ingress queue index. + * @cbfn: Completion callback. + * + * This API configures a offload egress queue with FW by issuing a + * FW_EQ_OFLD_CMD (with alloc + write ) mailbox. + */ +int +csio_wr_eq_create(struct csio_hw *hw, void *priv, int eq_idx, + int iq_idx, uint8_t portid, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + struct csio_mb *mbp; + struct csio_eq_params eqp; + + memset(&eqp, 0, sizeof(struct csio_eq_params)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + csio_err(hw, "EQ command out of memory!\n"); + return -ENOMEM; + } + + eqp.pfn = hw->pfn; + eqp.vfn = 0; + eqp.eqstart = 1; + eqp.hostfcmode = X_HOSTFCMODE_STATUS_PAGE; + eqp.iqid = csio_q_iqid(hw, iq_idx); + eqp.fbmin = X_FETCHBURSTMIN_64B; + eqp.fbmax = X_FETCHBURSTMAX_512B; + eqp.cidxfthresh = 0; + eqp.pciechn = portid; + eqp.eqsize = csio_q_size(hw, eq_idx) / CSIO_QCREDIT_SZ; + eqp.eqaddr = csio_q_pstart(hw, eq_idx); + + csio_mb_eq_ofld_alloc_write(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, + &eqp, cbfn); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of EQ OFLD cmd failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + if (cbfn != NULL) + return 0; + + return csio_wr_eq_cfg_rsp(hw, mbp, eq_idx); +} + +/* + * csio_wr_iq_destroy_rsp - Response handler for IQ removal. + * @hw: The HW module. + * @mbp: Mailbox. + * @iq_idx: Ingress queue that was freed. + * + * Handle FW_IQ_CMD (free) mailbox completion. + */ +static int +csio_wr_iq_destroy_rsp(struct csio_hw *hw, struct csio_mb *mbp, int iq_idx) +{ + enum fw_retval retval = csio_mb_fw_retval(mbp); + int rv = 0; + + if (retval != FW_SUCCESS) + rv = -EINVAL; + + mempool_free(mbp, hw->mb_mempool); + + return rv; +} + +/* + * csio_wr_iq_destroy - Free an ingress queue. + * @hw: The HW module. + * @priv: Private data object. + * @iq_idx: Ingress queue index to destroy + * @cbfn: Completion callback. + * + * This API frees an ingress queue by issuing the FW_IQ_CMD + * with the free bit set. + */ +static int +csio_wr_iq_destroy(struct csio_hw *hw, void *priv, int iq_idx, + void (*cbfn)(struct csio_hw *, struct csio_mb *)) +{ + int rv = 0; + struct csio_mb *mbp; + struct csio_iq_params iqp; + int flq_idx; + + memset(&iqp, 0, sizeof(struct csio_iq_params)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) + return -ENOMEM; + + iqp.pfn = hw->pfn; + iqp.vfn = 0; + iqp.iqid = csio_q_iqid(hw, iq_idx); + iqp.type = FW_IQ_TYPE_FL_INT_CAP; + + flq_idx = csio_q_iq_flq_idx(hw, iq_idx); + if (flq_idx != -1) + iqp.fl0id = csio_q_flid(hw, flq_idx); + else + iqp.fl0id = 0xFFFF; + + iqp.fl1id = 0xFFFF; + + csio_mb_iq_free(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &iqp, cbfn); + + rv = csio_mb_issue(hw, mbp); + if (rv != 0) { + mempool_free(mbp, hw->mb_mempool); + return rv; + } + + if (cbfn != NULL) + return 0; + + return csio_wr_iq_destroy_rsp(hw, mbp, iq_idx); +} + +/* + * csio_wr_eq_destroy_rsp - Response handler for OFLD EQ creation. + * @hw: The HW module. + * @mbp: Mailbox. + * @eq_idx: Egress queue that was freed. + * + * Handle FW_OFLD_EQ_CMD (free) mailbox completion. + */ +static int +csio_wr_eq_destroy_rsp(struct csio_hw *hw, struct csio_mb *mbp, int eq_idx) +{ + enum fw_retval retval = csio_mb_fw_retval(mbp); + int rv = 0; + + if (retval != FW_SUCCESS) + rv = -EINVAL; + + mempool_free(mbp, hw->mb_mempool); + + return rv; +} + +/* + * csio_wr_eq_destroy - Free an Egress queue. + * @hw: The HW module. + * @priv: Private data object. + * @eq_idx: Egress queue index to destroy + * @cbfn: Completion callback. + * + * This API frees an Egress queue by issuing the FW_EQ_OFLD_CMD + * with the free bit set. + */ +static int +csio_wr_eq_destroy(struct csio_hw *hw, void *priv, int eq_idx, + void (*cbfn) (struct csio_hw *, struct csio_mb *)) +{ + int rv = 0; + struct csio_mb *mbp; + struct csio_eq_params eqp; + + memset(&eqp, 0, sizeof(struct csio_eq_params)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) + return -ENOMEM; + + eqp.pfn = hw->pfn; + eqp.vfn = 0; + eqp.eqid = csio_q_eqid(hw, eq_idx); + + csio_mb_eq_ofld_free(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &eqp, cbfn); + + rv = csio_mb_issue(hw, mbp); + if (rv != 0) { + mempool_free(mbp, hw->mb_mempool); + return rv; + } + + if (cbfn != NULL) + return 0; + + return csio_wr_eq_destroy_rsp(hw, mbp, eq_idx); +} + +/* + * csio_wr_cleanup_eq_stpg - Cleanup Egress queue status page + * @hw: HW module + * @qidx: Egress queue index + * + * Cleanup the Egress queue status page. + */ +static void +csio_wr_cleanup_eq_stpg(struct csio_hw *hw, int qidx) +{ + struct csio_q *q = csio_hw_to_wrm(hw)->q_arr[qidx]; + struct csio_qstatus_page *stp = (struct csio_qstatus_page *)q->vwrap; + + memset(stp, 0, sizeof(*stp)); +} + +/* + * csio_wr_cleanup_iq_ftr - Cleanup Footer entries in IQ + * @hw: HW module + * @qidx: Ingress queue index + * + * Cleanup the footer entries in the given ingress queue, + * set to 1 the internal copy of genbit. + */ +static void +csio_wr_cleanup_iq_ftr(struct csio_hw *hw, int qidx) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_q *q = wrm->q_arr[qidx]; + void *wr; + struct csio_iqwr_footer *ftr; + uint32_t i = 0; + + /* set to 1 since we are just about zero out genbit */ + q->un.iq.genbit = 1; + + for (i = 0; i < q->credits; i++) { + /* Get the WR */ + wr = (void *)((uintptr_t)q->vstart + + (i * q->wr_sz)); + /* Get the footer */ + ftr = (struct csio_iqwr_footer *)((uintptr_t)wr + + (q->wr_sz - sizeof(*ftr))); + /* Zero out footer */ + memset(ftr, 0, sizeof(*ftr)); + } +} + +int +csio_wr_destroy_queues(struct csio_hw *hw, bool cmd) +{ + int i, flq_idx; + struct csio_q *q; + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + int rv; + + for (i = 0; i < wrm->free_qidx; i++) { + q = wrm->q_arr[i]; + + switch (q->type) { + case CSIO_EGRESS: + if (csio_q_eqid(hw, i) != CSIO_MAX_QID) { + csio_wr_cleanup_eq_stpg(hw, i); + if (!cmd) { + csio_q_eqid(hw, i) = CSIO_MAX_QID; + continue; + } + + rv = csio_wr_eq_destroy(hw, NULL, i, NULL); + if ((rv == -EBUSY) || (rv == -ETIMEDOUT)) + cmd = false; + + csio_q_eqid(hw, i) = CSIO_MAX_QID; + } + case CSIO_INGRESS: + if (csio_q_iqid(hw, i) != CSIO_MAX_QID) { + csio_wr_cleanup_iq_ftr(hw, i); + if (!cmd) { + csio_q_iqid(hw, i) = CSIO_MAX_QID; + flq_idx = csio_q_iq_flq_idx(hw, i); + if (flq_idx != -1) + csio_q_flid(hw, flq_idx) = + CSIO_MAX_QID; + continue; + } + + rv = csio_wr_iq_destroy(hw, NULL, i, NULL); + if ((rv == -EBUSY) || (rv == -ETIMEDOUT)) + cmd = false; + + csio_q_iqid(hw, i) = CSIO_MAX_QID; + flq_idx = csio_q_iq_flq_idx(hw, i); + if (flq_idx != -1) + csio_q_flid(hw, flq_idx) = CSIO_MAX_QID; + } + default: + break; + } + } + + hw->flags &= ~CSIO_HWF_Q_FW_ALLOCED; + + return 0; +} + +/* + * csio_wr_get - Get requested size of WR entry/entries from queue. + * @hw: HW module. + * @qidx: Index of queue. + * @size: Cumulative size of Work request(s). + * @wrp: Work request pair. + * + * If requested credits are available, return the start address of the + * work request in the work request pair. Set pidx accordingly and + * return. + * + * NOTE about WR pair: + * ================== + * A WR can start towards the end of a queue, and then continue at the + * beginning, since the queue is considered to be circular. This will + * require a pair of address/size to be passed back to the caller - + * hence Work request pair format. + */ +int +csio_wr_get(struct csio_hw *hw, int qidx, uint32_t size, + struct csio_wr_pair *wrp) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_q *q = wrm->q_arr[qidx]; + void *cwr = (void *)((uintptr_t)(q->vstart) + + (q->pidx * CSIO_QCREDIT_SZ)); + struct csio_qstatus_page *stp = (struct csio_qstatus_page *)q->vwrap; + uint16_t cidx = q->cidx = ntohs(stp->cidx); + uint16_t pidx = q->pidx; + uint32_t req_sz = ALIGN(size, CSIO_QCREDIT_SZ); + int req_credits = req_sz / CSIO_QCREDIT_SZ; + int credits; + + CSIO_DB_ASSERT(q->owner != NULL); + CSIO_DB_ASSERT((qidx >= 0) && (qidx < wrm->free_qidx)); + CSIO_DB_ASSERT(cidx <= q->credits); + + /* Calculate credits */ + if (pidx > cidx) { + credits = q->credits - (pidx - cidx) - 1; + } else if (cidx > pidx) { + credits = cidx - pidx - 1; + } else { + /* cidx == pidx, empty queue */ + credits = q->credits; + CSIO_INC_STATS(q, n_qempty); + } + + /* + * Check if we have enough credits. + * credits = 1 implies queue is full. + */ + if (!credits || (req_credits > credits)) { + CSIO_INC_STATS(q, n_qfull); + return -EBUSY; + } + + /* + * If we are here, we have enough credits to satisfy the + * request. Check if we are near the end of q, and if WR spills over. + * If it does, use the first addr/size to cover the queue until + * the end. Fit the remainder portion of the request at the top + * of queue and return it in the second addr/len. Set pidx + * accordingly. + */ + if (unlikely(((uintptr_t)cwr + req_sz) > (uintptr_t)(q->vwrap))) { + wrp->addr1 = cwr; + wrp->size1 = (uint32_t)((uintptr_t)q->vwrap - (uintptr_t)cwr); + wrp->addr2 = q->vstart; + wrp->size2 = req_sz - wrp->size1; + q->pidx = (uint16_t)(ALIGN(wrp->size2, CSIO_QCREDIT_SZ) / + CSIO_QCREDIT_SZ); + CSIO_INC_STATS(q, n_qwrap); + CSIO_INC_STATS(q, n_eq_wr_split); + } else { + wrp->addr1 = cwr; + wrp->size1 = req_sz; + wrp->addr2 = NULL; + wrp->size2 = 0; + q->pidx += (uint16_t)req_credits; + + /* We are the end of queue, roll back pidx to top of queue */ + if (unlikely(q->pidx == q->credits)) { + q->pidx = 0; + CSIO_INC_STATS(q, n_qwrap); + } + } + + q->inc_idx = (uint16_t)req_credits; + + CSIO_INC_STATS(q, n_tot_reqs); + + return 0; +} + +/* + * csio_wr_copy_to_wrp - Copies given data into WR. + * @data_buf - Data buffer + * @wrp - Work request pair. + * @wr_off - Work request offset. + * @data_len - Data length. + * + * Copies the given data in Work Request. Work request pair(wrp) specifies + * address information of Work request. + * Returns: none + */ +void +csio_wr_copy_to_wrp(void *data_buf, struct csio_wr_pair *wrp, + uint32_t wr_off, uint32_t data_len) +{ + uint32_t nbytes; + + /* Number of space available in buffer addr1 of WRP */ + nbytes = ((wrp->size1 - wr_off) >= data_len) ? + data_len : (wrp->size1 - wr_off); + + memcpy((uint8_t *) wrp->addr1 + wr_off, data_buf, nbytes); + data_len -= nbytes; + + /* Write the remaining data from the begining of circular buffer */ + if (data_len) { + CSIO_DB_ASSERT(data_len <= wrp->size2); + CSIO_DB_ASSERT(wrp->addr2 != NULL); + memcpy(wrp->addr2, (uint8_t *) data_buf + nbytes, data_len); + } +} + +/* + * csio_wr_issue - Notify chip of Work request. + * @hw: HW module. + * @qidx: Index of queue. + * @prio: 0: Low priority, 1: High priority + * + * Rings the SGE Doorbell by writing the current producer index of the passed + * in queue into the register. + * + */ +int +csio_wr_issue(struct csio_hw *hw, int qidx, bool prio) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_q *q = wrm->q_arr[qidx]; + + CSIO_DB_ASSERT((qidx >= 0) && (qidx < wrm->free_qidx)); + + wmb(); + /* Ring SGE Doorbell writing q->pidx into it */ + csio_wr_reg32(hw, DBPRIO(prio) | QID(q->un.eq.physeqid) | + PIDX(q->inc_idx), MYPF_REG(SGE_PF_KDOORBELL)); + q->inc_idx = 0; + + return 0; +} + +static inline uint32_t +csio_wr_avail_qcredits(struct csio_q *q) +{ + if (q->pidx > q->cidx) + return q->pidx - q->cidx; + else if (q->cidx > q->pidx) + return q->credits - (q->cidx - q->pidx); + else + return 0; /* cidx == pidx, empty queue */ +} + +/* + * csio_wr_inval_flq_buf - Invalidate a free list buffer entry. + * @hw: HW module. + * @flq: The freelist queue. + * + * Invalidate the driver's version of a freelist buffer entry, + * without freeing the associated the DMA memory. The entry + * to be invalidated is picked up from the current Free list + * queue cidx. + * + */ +static inline void +csio_wr_inval_flq_buf(struct csio_hw *hw, struct csio_q *flq) +{ + flq->cidx++; + if (flq->cidx == flq->credits) { + flq->cidx = 0; + CSIO_INC_STATS(flq, n_qwrap); + } +} + +/* + * csio_wr_process_fl - Process a freelist completion. + * @hw: HW module. + * @q: The ingress queue attached to the Freelist. + * @wr: The freelist completion WR in the ingress queue. + * @len_to_qid: The lower 32-bits of the first flit of the RSP footer + * @iq_handler: Caller's handler for this completion. + * @priv: Private pointer of caller + * + */ +static inline void +csio_wr_process_fl(struct csio_hw *hw, struct csio_q *q, + void *wr, uint32_t len_to_qid, + void (*iq_handler)(struct csio_hw *, void *, + uint32_t, struct csio_fl_dma_buf *, + void *), + void *priv) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + struct csio_fl_dma_buf flb; + struct csio_dma_buf *buf, *fbuf; + uint32_t bufsz, len, lastlen = 0; + int n; + struct csio_q *flq = hw->wrm.q_arr[q->un.iq.flq_idx]; + + CSIO_DB_ASSERT(flq != NULL); + + len = len_to_qid; + + if (len & IQWRF_NEWBUF) { + if (flq->un.fl.offset > 0) { + csio_wr_inval_flq_buf(hw, flq); + flq->un.fl.offset = 0; + } + len = IQWRF_LEN_GET(len); + } + + CSIO_DB_ASSERT(len != 0); + + flb.totlen = len; + + /* Consume all freelist buffers used for len bytes */ + for (n = 0, fbuf = flb.flbufs; ; n++, fbuf++) { + buf = &flq->un.fl.bufs[flq->cidx]; + bufsz = csio_wr_fl_bufsz(sge, buf); + + fbuf->paddr = buf->paddr; + fbuf->vaddr = buf->vaddr; + + flb.offset = flq->un.fl.offset; + lastlen = min(bufsz, len); + fbuf->len = lastlen; + + len -= lastlen; + if (!len) + break; + csio_wr_inval_flq_buf(hw, flq); + } + + flb.defer_free = flq->un.fl.packen ? 0 : 1; + + iq_handler(hw, wr, q->wr_sz - sizeof(struct csio_iqwr_footer), + &flb, priv); + + if (flq->un.fl.packen) + flq->un.fl.offset += ALIGN(lastlen, sge->csio_fl_align); + else + csio_wr_inval_flq_buf(hw, flq); + +} + +/* + * csio_is_new_iqwr - Is this a new Ingress queue entry ? + * @q: Ingress quueue. + * @ftr: Ingress queue WR SGE footer. + * + * The entry is new if our generation bit matches the corresponding + * bit in the footer of the current WR. + */ +static inline bool +csio_is_new_iqwr(struct csio_q *q, struct csio_iqwr_footer *ftr) +{ + return (q->un.iq.genbit == (ftr->u.type_gen >> IQWRF_GEN_SHIFT)); +} + +/* + * csio_wr_process_iq - Process elements in Ingress queue. + * @hw: HW pointer + * @qidx: Index of queue + * @iq_handler: Handler for this queue + * @priv: Caller's private pointer + * + * This routine walks through every entry of the ingress queue, calling + * the provided iq_handler with the entry, until the generation bit + * flips. + */ +int +csio_wr_process_iq(struct csio_hw *hw, struct csio_q *q, + void (*iq_handler)(struct csio_hw *, void *, + uint32_t, struct csio_fl_dma_buf *, + void *), + void *priv) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + void *wr = (void *)((uintptr_t)q->vstart + (q->cidx * q->wr_sz)); + struct csio_iqwr_footer *ftr; + uint32_t wr_type, fw_qid, qid; + struct csio_q *q_completed; + struct csio_q *flq = csio_iq_has_fl(q) ? + wrm->q_arr[q->un.iq.flq_idx] : NULL; + int rv = 0; + + /* Get the footer */ + ftr = (struct csio_iqwr_footer *)((uintptr_t)wr + + (q->wr_sz - sizeof(*ftr))); + + /* + * When q wrapped around last time, driver should have inverted + * ic.genbit as well. + */ + while (csio_is_new_iqwr(q, ftr)) { + + CSIO_DB_ASSERT(((uintptr_t)wr + q->wr_sz) <= + (uintptr_t)q->vwrap); + rmb(); + wr_type = IQWRF_TYPE_GET(ftr->u.type_gen); + + switch (wr_type) { + case X_RSPD_TYPE_CPL: + /* Subtract footer from WR len */ + iq_handler(hw, wr, q->wr_sz - sizeof(*ftr), NULL, priv); + break; + case X_RSPD_TYPE_FLBUF: + csio_wr_process_fl(hw, q, wr, + ntohl(ftr->pldbuflen_qid), + iq_handler, priv); + break; + case X_RSPD_TYPE_INTR: + fw_qid = ntohl(ftr->pldbuflen_qid); + qid = fw_qid - wrm->fw_iq_start; + q_completed = hw->wrm.intr_map[qid]; + + if (unlikely(qid == + csio_q_physiqid(hw, hw->intr_iq_idx))) { + /* + * We are already in the Forward Interrupt + * Interrupt Queue Service! Do-not service + * again! + * + */ + } else { + CSIO_DB_ASSERT(q_completed); + CSIO_DB_ASSERT( + q_completed->un.iq.iq_intx_handler); + + /* Call the queue handler. */ + q_completed->un.iq.iq_intx_handler(hw, NULL, + 0, NULL, (void *)q_completed); + } + break; + default: + csio_warn(hw, "Unknown resp type 0x%x received\n", + wr_type); + CSIO_INC_STATS(q, n_rsp_unknown); + break; + } + + /* + * Ingress *always* has fixed size WR entries. Therefore, + * there should always be complete WRs towards the end of + * queue. + */ + if (((uintptr_t)wr + q->wr_sz) == (uintptr_t)q->vwrap) { + + /* Roll over to start of queue */ + q->cidx = 0; + wr = q->vstart; + + /* Toggle genbit */ + q->un.iq.genbit ^= 0x1; + + CSIO_INC_STATS(q, n_qwrap); + } else { + q->cidx++; + wr = (void *)((uintptr_t)(q->vstart) + + (q->cidx * q->wr_sz)); + } + + ftr = (struct csio_iqwr_footer *)((uintptr_t)wr + + (q->wr_sz - sizeof(*ftr))); + q->inc_idx++; + + } /* while (q->un.iq.genbit == hdr->genbit) */ + + /* + * We need to re-arm SGE interrupts in case we got a stray interrupt, + * especially in msix mode. With INTx, this may be a common occurence. + */ + if (unlikely(!q->inc_idx)) { + CSIO_INC_STATS(q, n_stray_comp); + rv = -EINVAL; + goto restart; + } + + /* Replenish free list buffers if pending falls below low water mark */ + if (flq) { + uint32_t avail = csio_wr_avail_qcredits(flq); + if (avail <= 16) { + /* Make sure in FLQ, atleast 1 credit (8 FL buffers) + * remains unpopulated otherwise HW thinks + * FLQ is empty. + */ + csio_wr_update_fl(hw, flq, (flq->credits - 8) - avail); + csio_wr_ring_fldb(hw, flq); + } + } + +restart: + /* Now inform SGE about our incremental index value */ + csio_wr_reg32(hw, CIDXINC(q->inc_idx) | + INGRESSQID(q->un.iq.physiqid) | + TIMERREG(csio_sge_timer_reg), + MYPF_REG(SGE_PF_GTS)); + q->stats.n_tot_rsps += q->inc_idx; + + q->inc_idx = 0; + + return rv; +} + +int +csio_wr_process_iq_idx(struct csio_hw *hw, int qidx, + void (*iq_handler)(struct csio_hw *, void *, + uint32_t, struct csio_fl_dma_buf *, + void *), + void *priv) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_q *iq = wrm->q_arr[qidx]; + + return csio_wr_process_iq(hw, iq, iq_handler, priv); +} + +static int +csio_closest_timer(struct csio_sge *s, int time) +{ + int i, delta, match = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { + delta = time - s->timer_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + match = i; + } + } + return match; +} + +static int +csio_closest_thresh(struct csio_sge *s, int cnt) +{ + int i, delta, match = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { + delta = cnt - s->counter_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + match = i; + } + } + return match; +} + +static void +csio_wr_fixup_host_params(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + uint32_t clsz = L1_CACHE_BYTES; + uint32_t s_hps = PAGE_SHIFT - 10; + uint32_t ingpad = 0; + uint32_t stat_len = clsz > 64 ? 128 : 64; + + csio_wr_reg32(hw, HOSTPAGESIZEPF0(s_hps) | HOSTPAGESIZEPF1(s_hps) | + HOSTPAGESIZEPF2(s_hps) | HOSTPAGESIZEPF3(s_hps) | + HOSTPAGESIZEPF4(s_hps) | HOSTPAGESIZEPF5(s_hps) | + HOSTPAGESIZEPF6(s_hps) | HOSTPAGESIZEPF7(s_hps), + SGE_HOST_PAGE_SIZE); + + sge->csio_fl_align = clsz < 32 ? 32 : clsz; + ingpad = ilog2(sge->csio_fl_align) - 5; + + csio_set_reg_field(hw, SGE_CONTROL, INGPADBOUNDARY_MASK | + EGRSTATUSPAGESIZE(1), + INGPADBOUNDARY(ingpad) | + EGRSTATUSPAGESIZE(stat_len != 64)); + + /* FL BUFFER SIZE#0 is Page size i,e already aligned to cache line */ + csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0); + csio_wr_reg32(hw, + (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2) + + sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1), + SGE_FL_BUFFER_SIZE2); + csio_wr_reg32(hw, + (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3) + + sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1), + SGE_FL_BUFFER_SIZE3); + + csio_wr_reg32(hw, HPZ0(PAGE_SHIFT - 12), ULP_RX_TDDP_PSZ); + + /* default value of rx_dma_offset of the NIC driver */ + csio_set_reg_field(hw, SGE_CONTROL, PKTSHIFT_MASK, + PKTSHIFT(CSIO_SGE_RX_DMA_OFFSET)); +} + +static void +csio_init_intr_coalesce_parms(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + + csio_sge_thresh_reg = csio_closest_thresh(sge, csio_intr_coalesce_cnt); + if (csio_intr_coalesce_cnt) { + csio_sge_thresh_reg = 0; + csio_sge_timer_reg = X_TIMERREG_RESTART_COUNTER; + return; + } + + csio_sge_timer_reg = csio_closest_timer(sge, csio_intr_coalesce_time); +} + +/* + * csio_wr_get_sge - Get SGE register values. + * @hw: HW module. + * + * Used by non-master functions and by master-functions relying on config file. + */ +static void +csio_wr_get_sge(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + uint32_t ingpad; + int i; + u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5; + u32 ingress_rx_threshold; + + sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL); + + ingpad = INGPADBOUNDARY_GET(sge->sge_control); + + switch (ingpad) { + case X_INGPCIEBOUNDARY_32B: + sge->csio_fl_align = 32; break; + case X_INGPCIEBOUNDARY_64B: + sge->csio_fl_align = 64; break; + case X_INGPCIEBOUNDARY_128B: + sge->csio_fl_align = 128; break; + case X_INGPCIEBOUNDARY_256B: + sge->csio_fl_align = 256; break; + case X_INGPCIEBOUNDARY_512B: + sge->csio_fl_align = 512; break; + case X_INGPCIEBOUNDARY_1024B: + sge->csio_fl_align = 1024; break; + case X_INGPCIEBOUNDARY_2048B: + sge->csio_fl_align = 2048; break; + case X_INGPCIEBOUNDARY_4096B: + sge->csio_fl_align = 4096; break; + } + + for (i = 0; i < CSIO_SGE_FL_SIZE_REGS; i++) + csio_get_flbuf_size(hw, sge, i); + + timer_value_0_and_1 = csio_rd_reg32(hw, SGE_TIMER_VALUE_0_AND_1); + timer_value_2_and_3 = csio_rd_reg32(hw, SGE_TIMER_VALUE_2_AND_3); + timer_value_4_and_5 = csio_rd_reg32(hw, SGE_TIMER_VALUE_4_AND_5); + + sge->timer_val[0] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE0_GET(timer_value_0_and_1)); + sge->timer_val[1] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE1_GET(timer_value_0_and_1)); + sge->timer_val[2] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE2_GET(timer_value_2_and_3)); + sge->timer_val[3] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE3_GET(timer_value_2_and_3)); + sge->timer_val[4] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE4_GET(timer_value_4_and_5)); + sge->timer_val[5] = (uint16_t)csio_core_ticks_to_us(hw, + TIMERVALUE5_GET(timer_value_4_and_5)); + + ingress_rx_threshold = csio_rd_reg32(hw, SGE_INGRESS_RX_THRESHOLD); + sge->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold); + sge->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold); + sge->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold); + sge->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold); + + csio_init_intr_coalesce_parms(hw); +} + +/* + * csio_wr_set_sge - Initialize SGE registers + * @hw: HW module. + * + * Used by Master function to initialize SGE registers in the absence + * of a config file. + */ +static void +csio_wr_set_sge(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_sge *sge = &wrm->sge; + int i; + + /* + * Set up our basic SGE mode to deliver CPL messages to our Ingress + * Queue and Packet Date to the Free List. + */ + csio_set_reg_field(hw, SGE_CONTROL, RXPKTCPLMODE(1), RXPKTCPLMODE(1)); + + sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL); + + /* sge->csio_fl_align is set up by csio_wr_fixup_host_params(). */ + + /* + * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows + * and generate an interrupt when this occurs so we can recover. + */ + csio_set_reg_field(hw, SGE_DBFIFO_STATUS, + HP_INT_THRESH(HP_INT_THRESH_MASK) | + LP_INT_THRESH(LP_INT_THRESH_MASK), + HP_INT_THRESH(CSIO_SGE_DBFIFO_INT_THRESH) | + LP_INT_THRESH(CSIO_SGE_DBFIFO_INT_THRESH)); + csio_set_reg_field(hw, SGE_DOORBELL_CONTROL, ENABLE_DROP, + ENABLE_DROP); + + /* SGE_FL_BUFFER_SIZE0 is set up by csio_wr_fixup_host_params(). */ + + CSIO_SET_FLBUF_SIZE(hw, 1, CSIO_SGE_FLBUF_SIZE1); + CSIO_SET_FLBUF_SIZE(hw, 2, CSIO_SGE_FLBUF_SIZE2); + CSIO_SET_FLBUF_SIZE(hw, 3, CSIO_SGE_FLBUF_SIZE3); + CSIO_SET_FLBUF_SIZE(hw, 4, CSIO_SGE_FLBUF_SIZE4); + CSIO_SET_FLBUF_SIZE(hw, 5, CSIO_SGE_FLBUF_SIZE5); + CSIO_SET_FLBUF_SIZE(hw, 6, CSIO_SGE_FLBUF_SIZE6); + CSIO_SET_FLBUF_SIZE(hw, 7, CSIO_SGE_FLBUF_SIZE7); + CSIO_SET_FLBUF_SIZE(hw, 8, CSIO_SGE_FLBUF_SIZE8); + + for (i = 0; i < CSIO_SGE_FL_SIZE_REGS; i++) + csio_get_flbuf_size(hw, sge, i); + + /* Initialize interrupt coalescing attributes */ + sge->timer_val[0] = CSIO_SGE_TIMER_VAL_0; + sge->timer_val[1] = CSIO_SGE_TIMER_VAL_1; + sge->timer_val[2] = CSIO_SGE_TIMER_VAL_2; + sge->timer_val[3] = CSIO_SGE_TIMER_VAL_3; + sge->timer_val[4] = CSIO_SGE_TIMER_VAL_4; + sge->timer_val[5] = CSIO_SGE_TIMER_VAL_5; + + sge->counter_val[0] = CSIO_SGE_INT_CNT_VAL_0; + sge->counter_val[1] = CSIO_SGE_INT_CNT_VAL_1; + sge->counter_val[2] = CSIO_SGE_INT_CNT_VAL_2; + sge->counter_val[3] = CSIO_SGE_INT_CNT_VAL_3; + + csio_wr_reg32(hw, THRESHOLD_0(sge->counter_val[0]) | + THRESHOLD_1(sge->counter_val[1]) | + THRESHOLD_2(sge->counter_val[2]) | + THRESHOLD_3(sge->counter_val[3]), + SGE_INGRESS_RX_THRESHOLD); + + csio_wr_reg32(hw, + TIMERVALUE0(csio_us_to_core_ticks(hw, sge->timer_val[0])) | + TIMERVALUE1(csio_us_to_core_ticks(hw, sge->timer_val[1])), + SGE_TIMER_VALUE_0_AND_1); + + csio_wr_reg32(hw, + TIMERVALUE2(csio_us_to_core_ticks(hw, sge->timer_val[2])) | + TIMERVALUE3(csio_us_to_core_ticks(hw, sge->timer_val[3])), + SGE_TIMER_VALUE_2_AND_3); + + csio_wr_reg32(hw, + TIMERVALUE4(csio_us_to_core_ticks(hw, sge->timer_val[4])) | + TIMERVALUE5(csio_us_to_core_ticks(hw, sge->timer_val[5])), + SGE_TIMER_VALUE_4_AND_5); + + csio_init_intr_coalesce_parms(hw); +} + +void +csio_wr_sge_init(struct csio_hw *hw) +{ + /* + * If we are master: + * - If we plan to use the config file, we need to fixup some + * host specific registers, and read the rest of the SGE + * configuration. + * - If we dont plan to use the config file, we need to initialize + * SGE entirely, including fixing the host specific registers. + * If we arent the master, we are only allowed to read and work off of + * the already initialized SGE values. + * + * Therefore, before calling this function, we assume that the master- + * ship of the card, and whether to use config file or not, have + * already been decided. In other words, CSIO_HWF_USING_SOFT_PARAMS and + * CSIO_HWF_MASTER should be set/unset. + */ + if (csio_is_hw_master(hw)) { + csio_wr_fixup_host_params(hw); + + if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS) + csio_wr_get_sge(hw); + else + csio_wr_set_sge(hw); + } else + csio_wr_get_sge(hw); +} + +/* + * csio_wrm_init - Initialize Work request module. + * @wrm: WR module + * @hw: HW pointer + * + * Allocates memory for an array of queue pointers starting at q_arr. + */ +int +csio_wrm_init(struct csio_wrm *wrm, struct csio_hw *hw) +{ + int i; + + if (!wrm->num_q) { + csio_err(hw, "Num queues is not set\n"); + return -EINVAL; + } + + wrm->q_arr = kzalloc(sizeof(struct csio_q *) * wrm->num_q, GFP_KERNEL); + if (!wrm->q_arr) + goto err; + + for (i = 0; i < wrm->num_q; i++) { + wrm->q_arr[i] = kzalloc(sizeof(struct csio_q), GFP_KERNEL); + if (!wrm->q_arr[i]) { + while (--i >= 0) + kfree(wrm->q_arr[i]); + goto err_free_arr; + } + } + wrm->free_qidx = 0; + + return 0; + +err_free_arr: + kfree(wrm->q_arr); +err: + return -ENOMEM; +} + +/* + * csio_wrm_exit - Initialize Work request module. + * @wrm: WR module + * @hw: HW module + * + * Uninitialize WR module. Free q_arr and pointers in it. + * We have the additional job of freeing the DMA memory associated + * with the queues. + */ +void +csio_wrm_exit(struct csio_wrm *wrm, struct csio_hw *hw) +{ + int i; + uint32_t j; + struct csio_q *q; + struct csio_dma_buf *buf; + + for (i = 0; i < wrm->num_q; i++) { + q = wrm->q_arr[i]; + + if (wrm->free_qidx && (i < wrm->free_qidx)) { + if (q->type == CSIO_FREELIST) { + if (!q->un.fl.bufs) + continue; + for (j = 0; j < q->credits; j++) { + buf = &q->un.fl.bufs[j]; + if (!buf->vaddr) + continue; + pci_free_consistent(hw->pdev, buf->len, + buf->vaddr, + buf->paddr); + } + kfree(q->un.fl.bufs); + } + pci_free_consistent(hw->pdev, q->size, + q->vstart, q->pstart); + } + kfree(q); + } + + hw->flags &= ~CSIO_HWF_Q_MEM_ALLOCED; + + kfree(wrm->q_arr); +} diff --git a/drivers/scsi/csiostor/csio_wr.h b/drivers/scsi/csiostor/csio_wr.h new file mode 100644 index 0000000..8d30e7a --- /dev/null +++ b/drivers/scsi/csiostor/csio_wr.h @@ -0,0 +1,512 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __CSIO_WR_H__ +#define __CSIO_WR_H__ + +#include <linux/cache.h> + +#include "csio_defs.h" +#include "t4fw_api.h" +#include "t4fw_api_stor.h" + +/* + * SGE register field values. + */ +#define X_INGPCIEBOUNDARY_32B 0 +#define X_INGPCIEBOUNDARY_64B 1 +#define X_INGPCIEBOUNDARY_128B 2 +#define X_INGPCIEBOUNDARY_256B 3 +#define X_INGPCIEBOUNDARY_512B 4 +#define X_INGPCIEBOUNDARY_1024B 5 +#define X_INGPCIEBOUNDARY_2048B 6 +#define X_INGPCIEBOUNDARY_4096B 7 + +/* GTS register */ +#define X_TIMERREG_COUNTER0 0 +#define X_TIMERREG_COUNTER1 1 +#define X_TIMERREG_COUNTER2 2 +#define X_TIMERREG_COUNTER3 3 +#define X_TIMERREG_COUNTER4 4 +#define X_TIMERREG_COUNTER5 5 +#define X_TIMERREG_RESTART_COUNTER 6 +#define X_TIMERREG_UPDATE_CIDX 7 + +/* + * Egress Context field values + */ +#define X_FETCHBURSTMIN_16B 0 +#define X_FETCHBURSTMIN_32B 1 +#define X_FETCHBURSTMIN_64B 2 +#define X_FETCHBURSTMIN_128B 3 + +#define X_FETCHBURSTMAX_64B 0 +#define X_FETCHBURSTMAX_128B 1 +#define X_FETCHBURSTMAX_256B 2 +#define X_FETCHBURSTMAX_512B 3 + +#define X_HOSTFCMODE_NONE 0 +#define X_HOSTFCMODE_INGRESS_QUEUE 1 +#define X_HOSTFCMODE_STATUS_PAGE 2 +#define X_HOSTFCMODE_BOTH 3 + +/* + * Ingress Context field values + */ +#define X_UPDATESCHEDULING_TIMER 0 +#define X_UPDATESCHEDULING_COUNTER_OPTTIMER 1 + +#define X_UPDATEDELIVERY_NONE 0 +#define X_UPDATEDELIVERY_INTERRUPT 1 +#define X_UPDATEDELIVERY_STATUS_PAGE 2 +#define X_UPDATEDELIVERY_BOTH 3 + +#define X_INTERRUPTDESTINATION_PCIE 0 +#define X_INTERRUPTDESTINATION_IQ 1 + +#define X_RSPD_TYPE_FLBUF 0 +#define X_RSPD_TYPE_CPL 1 +#define X_RSPD_TYPE_INTR 2 + +/* WR status is at the same position as retval in a CMD header */ +#define csio_wr_status(_wr) \ + (FW_CMD_RETVAL_GET(ntohl(((struct fw_cmd_hdr *)(_wr))->lo))) + +struct csio_hw; + +extern int csio_intr_coalesce_cnt; +extern int csio_intr_coalesce_time; + +/* Ingress queue params */ +struct csio_iq_params { + + uint8_t iq_start:1; + uint8_t iq_stop:1; + uint8_t pfn:3; + + uint8_t vfn; + + uint16_t physiqid; + uint16_t iqid; + + uint16_t fl0id; + uint16_t fl1id; + + uint8_t viid; + + uint8_t type; + uint8_t iqasynch; + uint8_t reserved4; + + uint8_t iqandst; + uint8_t iqanus; + uint8_t iqanud; + + uint16_t iqandstindex; + + uint8_t iqdroprss; + uint8_t iqpciech; + uint8_t iqdcaen; + + uint8_t iqdcacpu; + uint8_t iqintcntthresh; + uint8_t iqo; + + uint8_t iqcprio; + uint8_t iqesize; + + uint16_t iqsize; + + uint64_t iqaddr; + + uint8_t iqflintiqhsen; + uint8_t reserved5; + uint8_t iqflintcongen; + uint8_t iqflintcngchmap; + + uint32_t reserved6; + + uint8_t fl0hostfcmode; + uint8_t fl0cprio; + uint8_t fl0paden; + uint8_t fl0packen; + uint8_t fl0congen; + uint8_t fl0dcaen; + + uint8_t fl0dcacpu; + uint8_t fl0fbmin; + + uint8_t fl0fbmax; + uint8_t fl0cidxfthresho; + uint8_t fl0cidxfthresh; + + uint16_t fl0size; + + uint64_t fl0addr; + + uint64_t reserved7; + + uint8_t fl1hostfcmode; + uint8_t fl1cprio; + uint8_t fl1paden; + uint8_t fl1packen; + uint8_t fl1congen; + uint8_t fl1dcaen; + + uint8_t fl1dcacpu; + uint8_t fl1fbmin; + + uint8_t fl1fbmax; + uint8_t fl1cidxfthresho; + uint8_t fl1cidxfthresh; + + uint16_t fl1size; + + uint64_t fl1addr; +}; + +/* Egress queue params */ +struct csio_eq_params { + + uint8_t pfn; + uint8_t vfn; + + uint8_t eqstart:1; + uint8_t eqstop:1; + + uint16_t physeqid; + uint32_t eqid; + + uint8_t hostfcmode:2; + uint8_t cprio:1; + uint8_t pciechn:3; + + uint16_t iqid; + + uint8_t dcaen:1; + uint8_t dcacpu:5; + + uint8_t fbmin:3; + uint8_t fbmax:3; + + uint8_t cidxfthresho:1; + uint8_t cidxfthresh:3; + + uint16_t eqsize; + + uint64_t eqaddr; +}; + +struct csio_dma_buf { + struct list_head list; + void *vaddr; /* Virtual address */ + dma_addr_t paddr; /* Physical address */ + uint32_t len; /* Buffer size */ +}; + +/* Generic I/O request structure */ +struct csio_ioreq { + struct csio_sm sm; /* SM, List + * should be the first member + */ + int iq_idx; /* Ingress queue index */ + int eq_idx; /* Egress queue index */ + uint32_t nsge; /* Number of SG elements */ + uint32_t tmo; /* Driver timeout */ + uint32_t datadir; /* Data direction */ + struct csio_dma_buf dma_buf; /* Req/resp DMA buffers */ + uint16_t wr_status; /* WR completion status */ + int16_t drv_status; /* Driver internal status */ + struct csio_lnode *lnode; /* Owner lnode */ + struct csio_rnode *rnode; /* Src/destination rnode */ + void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *); + /* completion callback */ + void *scratch1; /* Scratch area 1. + */ + void *scratch2; /* Scratch area 2. */ + struct list_head gen_list; /* Any list associated with + * this ioreq. + */ + uint64_t fw_handle; /* Unique handle passed + * to FW + */ + uint8_t dcopy; /* Data copy required */ + uint8_t reserved1; + uint16_t reserved2; + struct completion cmplobj; /* ioreq completion object */ +} ____cacheline_aligned_in_smp; + +/* + * Egress status page for egress cidx updates + */ +struct csio_qstatus_page { + __be32 qid; + __be16 cidx; + __be16 pidx; +}; + + +enum { + CSIO_MAX_FLBUF_PER_IQWR = 4, + CSIO_QCREDIT_SZ = 64, /* pidx/cidx increments + * in bytes + */ + CSIO_MAX_QID = 0xFFFF, + CSIO_MAX_IQ = 128, + + CSIO_SGE_NTIMERS = 6, + CSIO_SGE_NCOUNTERS = 4, + CSIO_SGE_FL_SIZE_REGS = 16, +}; + +/* Defines for type */ +enum { + CSIO_EGRESS = 1, + CSIO_INGRESS = 2, + CSIO_FREELIST = 3, +}; + +/* + * Structure for footer (last 2 flits) of Ingress Queue Entry. + */ +struct csio_iqwr_footer { + __be32 hdrbuflen_pidx; + __be32 pldbuflen_qid; + union { + u8 type_gen; + __be64 last_flit; + } u; +}; + +#define IQWRF_NEWBUF (1 << 31) +#define IQWRF_LEN_GET(x) (((x) >> 0) & 0x7fffffffU) +#define IQWRF_GEN_SHIFT 7 +#define IQWRF_TYPE_GET(x) (((x) >> 4) & 0x3U) + + +/* + * WR pair: + * ======== + * A WR can start towards the end of a queue, and then continue at the + * beginning, since the queue is considered to be circular. This will + * require a pair of address/len to be passed back to the caller - + * hence the Work request pair structure. + */ +struct csio_wr_pair { + void *addr1; + uint32_t size1; + void *addr2; + uint32_t size2; +}; + +/* + * The following structure is used by ingress processing to return the + * free list buffers to consumers. + */ +struct csio_fl_dma_buf { + struct csio_dma_buf flbufs[CSIO_MAX_FLBUF_PER_IQWR]; + /* Freelist DMA buffers */ + int offset; /* Offset within the + * first FL buf. + */ + uint32_t totlen; /* Total length */ + uint8_t defer_free; /* Free of buffer can + * deferred + */ +}; + +/* Data-types */ +typedef void (*iq_handler_t)(struct csio_hw *, void *, uint32_t, + struct csio_fl_dma_buf *, void *); + +struct csio_iq { + uint16_t iqid; /* Queue ID */ + uint16_t physiqid; /* Physical Queue ID */ + uint16_t genbit; /* Generation bit, + * initially set to 1 + */ + int flq_idx; /* Freelist queue index */ + iq_handler_t iq_intx_handler; /* IQ INTx handler routine */ +}; + +struct csio_eq { + uint16_t eqid; /* Qid */ + uint16_t physeqid; /* Physical Queue ID */ + uint8_t wrap[512]; /* Temp area for q-wrap around*/ +}; + +struct csio_fl { + uint16_t flid; /* Qid */ + uint16_t packen; /* Packing enabled? */ + int offset; /* Offset within FL buf */ + int sreg; /* Size register */ + struct csio_dma_buf *bufs; /* Free list buffer ptr array + * indexed using flq->cidx/pidx + */ +}; + +struct csio_qstats { + uint32_t n_tot_reqs; /* Total no. of Requests */ + uint32_t n_tot_rsps; /* Total no. of responses */ + uint32_t n_qwrap; /* Queue wraps */ + uint32_t n_eq_wr_split; /* Number of split EQ WRs */ + uint32_t n_qentry; /* Queue entry */ + uint32_t n_qempty; /* Queue empty */ + uint32_t n_qfull; /* Queue fulls */ + uint32_t n_rsp_unknown; /* Unknown response type */ + uint32_t n_stray_comp; /* Stray completion intr */ + uint32_t n_flq_refill; /* Number of FL refills */ +}; + +/* Queue metadata */ +struct csio_q { + uint16_t type; /* Type: Ingress/Egress/FL */ + uint16_t pidx; /* producer index */ + uint16_t cidx; /* consumer index */ + uint16_t inc_idx; /* Incremental index */ + uint32_t wr_sz; /* Size of all WRs in this q + * if fixed + */ + void *vstart; /* Base virtual address + * of queue + */ + void *vwrap; /* Virtual end address to + * wrap around at + */ + uint32_t credits; /* Size of queue in credits */ + void *owner; /* Owner */ + union { /* Queue contexts */ + struct csio_iq iq; + struct csio_eq eq; + struct csio_fl fl; + } un; + + dma_addr_t pstart; /* Base physical address of + * queue + */ + uint32_t portid; /* PCIE Channel */ + uint32_t size; /* Size of queue in bytes */ + struct csio_qstats stats; /* Statistics */ +} ____cacheline_aligned_in_smp; + +struct csio_sge { + uint32_t csio_fl_align; /* Calculated and cached + * for fast path + */ + uint32_t sge_control; /* padding, boundaries, + * lengths, etc. + */ + uint32_t sge_host_page_size; /* Host page size */ + uint32_t sge_fl_buf_size[CSIO_SGE_FL_SIZE_REGS]; + /* free list buffer sizes */ + uint16_t timer_val[CSIO_SGE_NTIMERS]; + uint8_t counter_val[CSIO_SGE_NCOUNTERS]; +}; + +/* Work request module */ +struct csio_wrm { + int num_q; /* Number of queues */ + struct csio_q **q_arr; /* Array of queue pointers + * allocated dynamically + * based on configured values + */ + uint32_t fw_iq_start; /* Start ID of IQ for this fn*/ + uint32_t fw_eq_start; /* Start ID of EQ for this fn*/ + struct csio_q *intr_map[CSIO_MAX_IQ]; + /* IQ-id to IQ map table. */ + int free_qidx; /* queue idx of free queue */ + struct csio_sge sge; /* SGE params */ +}; + +#define csio_get_q(__hw, __idx) ((__hw)->wrm.q_arr[__idx]) +#define csio_q_type(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->type) +#define csio_q_pidx(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->pidx) +#define csio_q_cidx(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->cidx) +#define csio_q_inc_idx(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->inc_idx) +#define csio_q_vstart(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->vstart) +#define csio_q_pstart(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->pstart) +#define csio_q_size(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->size) +#define csio_q_credits(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->credits) +#define csio_q_portid(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->portid) +#define csio_q_wr_sz(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->wr_sz) +#define csio_q_iqid(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->un.iq.iqid) +#define csio_q_physiqid(__hw, __idx) \ + ((__hw)->wrm.q_arr[(__idx)]->un.iq.physiqid) +#define csio_q_iq_flq_idx(__hw, __idx) \ + ((__hw)->wrm.q_arr[(__idx)]->un.iq.flq_idx) +#define csio_q_eqid(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->un.eq.eqid) +#define csio_q_flid(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->un.fl.flid) + +#define csio_q_physeqid(__hw, __idx) \ + ((__hw)->wrm.q_arr[(__idx)]->un.eq.physeqid) +#define csio_iq_has_fl(__iq) ((__iq)->un.iq.flq_idx != -1) + +#define csio_q_iq_to_flid(__hw, __iq_idx) \ + csio_q_flid((__hw), (__hw)->wrm.q_arr[(__iq_qidx)]->un.iq.flq_idx) +#define csio_q_set_intr_map(__hw, __iq_idx, __rel_iq_id) \ + (__hw)->wrm.intr_map[__rel_iq_id] = csio_get_q(__hw, __iq_idx) +#define csio_q_eq_wrap(__hw, __idx) ((__hw)->wrm.q_arr[(__idx)]->un.eq.wrap) + +struct csio_mb; + +int csio_wr_alloc_q(struct csio_hw *, uint32_t, uint32_t, + uint16_t, void *, uint32_t, int, iq_handler_t); +int csio_wr_iq_create(struct csio_hw *, void *, int, + uint32_t, uint8_t, bool, + void (*)(struct csio_hw *, struct csio_mb *)); +int csio_wr_eq_create(struct csio_hw *, void *, int, int, uint8_t, + void (*)(struct csio_hw *, struct csio_mb *)); +int csio_wr_destroy_queues(struct csio_hw *, bool cmd); + + +int csio_wr_get(struct csio_hw *, int, uint32_t, + struct csio_wr_pair *); +void csio_wr_copy_to_wrp(void *, struct csio_wr_pair *, uint32_t, uint32_t); +int csio_wr_issue(struct csio_hw *, int, bool); +int csio_wr_process_iq(struct csio_hw *, struct csio_q *, + void (*)(struct csio_hw *, void *, + uint32_t, struct csio_fl_dma_buf *, + void *), + void *); +int csio_wr_process_iq_idx(struct csio_hw *, int, + void (*)(struct csio_hw *, void *, + uint32_t, struct csio_fl_dma_buf *, + void *), + void *); + +void csio_wr_sge_init(struct csio_hw *); +int csio_wrm_init(struct csio_wrm *, struct csio_hw *); +void csio_wrm_exit(struct csio_wrm *, struct csio_hw *); + +#endif /* ifndef __CSIO_WR_H__ */ diff --git a/drivers/scsi/csiostor/t4fw_api_stor.h b/drivers/scsi/csiostor/t4fw_api_stor.h new file mode 100644 index 0000000..1223e0d --- /dev/null +++ b/drivers/scsi/csiostor/t4fw_api_stor.h @@ -0,0 +1,578 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _T4FW_API_STOR_H_ +#define _T4FW_API_STOR_H_ + + +/****************************************************************************** + * R E T U R N V A L U E S + ********************************/ + +enum fw_retval { + FW_SUCCESS = 0, /* completed sucessfully */ + FW_EPERM = 1, /* operation not permitted */ + FW_ENOENT = 2, /* no such file or directory */ + FW_EIO = 5, /* input/output error; hw bad */ + FW_ENOEXEC = 8, /* exec format error; inv microcode */ + FW_EAGAIN = 11, /* try again */ + FW_ENOMEM = 12, /* out of memory */ + FW_EFAULT = 14, /* bad address; fw bad */ + FW_EBUSY = 16, /* resource busy */ + FW_EEXIST = 17, /* file exists */ + FW_EINVAL = 22, /* invalid argument */ + FW_ENOSPC = 28, /* no space left on device */ + FW_ENOSYS = 38, /* functionality not implemented */ + FW_EPROTO = 71, /* protocol error */ + FW_EADDRINUSE = 98, /* address already in use */ + FW_EADDRNOTAVAIL = 99, /* cannot assigned requested address */ + FW_ENETDOWN = 100, /* network is down */ + FW_ENETUNREACH = 101, /* network is unreachable */ + FW_ENOBUFS = 105, /* no buffer space available */ + FW_ETIMEDOUT = 110, /* timeout */ + FW_EINPROGRESS = 115, /* fw internal */ + FW_SCSI_ABORT_REQUESTED = 128, /* */ + FW_SCSI_ABORT_TIMEDOUT = 129, /* */ + FW_SCSI_ABORTED = 130, /* */ + FW_SCSI_CLOSE_REQUESTED = 131, /* */ + FW_ERR_LINK_DOWN = 132, /* */ + FW_RDEV_NOT_READY = 133, /* */ + FW_ERR_RDEV_LOST = 134, /* */ + FW_ERR_RDEV_LOGO = 135, /* */ + FW_FCOE_NO_XCHG = 136, /* */ + FW_SCSI_RSP_ERR = 137, /* */ + FW_ERR_RDEV_IMPL_LOGO = 138, /* */ + FW_SCSI_UNDER_FLOW_ERR = 139, /* */ + FW_SCSI_OVER_FLOW_ERR = 140, /* */ + FW_SCSI_DDP_ERR = 141, /* DDP error*/ + FW_SCSI_TASK_ERR = 142, /* No SCSI tasks available */ +}; + +enum fw_fcoe_link_sub_op { + FCOE_LINK_DOWN = 0x0, + FCOE_LINK_UP = 0x1, + FCOE_LINK_COND = 0x2, +}; + +enum fw_fcoe_link_status { + FCOE_LINKDOWN = 0x0, + FCOE_LINKUP = 0x1, +}; + +enum fw_ofld_prot { + PROT_FCOE = 0x1, + PROT_ISCSI = 0x2, +}; + +enum rport_type_fcoe { + FLOGI_VFPORT = 0x1, /* 0xfffffe */ + FDISC_VFPORT = 0x2, /* 0xfffffe */ + NS_VNPORT = 0x3, /* 0xfffffc */ + REG_FC4_VNPORT = 0x4, /* any FC4 type VN_PORT */ + REG_VNPORT = 0x5, /* 0xfffxxx - non FC4 port in switch */ + FDMI_VNPORT = 0x6, /* 0xfffffa */ + FAB_CTLR_VNPORT = 0x7, /* 0xfffffd */ +}; + +enum event_cause_fcoe { + PLOGI_ACC_RCVD = 0x01, + PLOGI_RJT_RCVD = 0x02, + PLOGI_RCVD = 0x03, + PLOGO_RCVD = 0x04, + PRLI_ACC_RCVD = 0x05, + PRLI_RJT_RCVD = 0x06, + PRLI_RCVD = 0x07, + PRLO_RCVD = 0x08, + NPORT_ID_CHGD = 0x09, + FLOGO_RCVD = 0x0a, + CLR_VIRT_LNK_RCVD = 0x0b, + FLOGI_ACC_RCVD = 0x0c, + FLOGI_RJT_RCVD = 0x0d, + FDISC_ACC_RCVD = 0x0e, + FDISC_RJT_RCVD = 0x0f, + FLOGI_TMO_MAX_RETRY = 0x10, + IMPL_LOGO_ADISC_ACC = 0x11, + IMPL_LOGO_ADISC_RJT = 0x12, + IMPL_LOGO_ADISC_CNFLT = 0x13, + PRLI_TMO = 0x14, + ADISC_TMO = 0x15, + RSCN_DEV_LOST = 0x16, + SCR_ACC_RCVD = 0x17, + ADISC_RJT_RCVD = 0x18, + LOGO_SNT = 0x19, + PROTO_ERR_IMPL_LOGO = 0x1a, +}; + +enum fcoe_cmn_type { + FCOE_ELS, + FCOE_CT, + FCOE_SCSI_CMD, + FCOE_UNSOL_ELS, +}; + +enum fw_wr_stor_opcodes { + FW_RDEV_WR = 0x38, + FW_FCOE_ELS_CT_WR = 0x30, + FW_SCSI_WRITE_WR = 0x31, + FW_SCSI_READ_WR = 0x32, + FW_SCSI_CMD_WR = 0x33, + FW_SCSI_ABRT_CLS_WR = 0x34, +}; + +struct fw_rdev_wr { + __be32 op_to_immdlen; + __be32 alloc_to_len16; + __be64 cookie; + u8 protocol; + u8 event_cause; + u8 cur_state; + u8 prev_state; + __be32 flags_to_assoc_flowid; + union rdev_entry { + struct fcoe_rdev_entry { + __be32 flowid; + u8 protocol; + u8 event_cause; + u8 flags; + u8 rjt_reason; + u8 cur_login_st; + u8 prev_login_st; + __be16 rcv_fr_sz; + u8 rd_xfer_rdy_to_rport_type; + u8 vft_to_qos; + u8 org_proc_assoc_to_acc_rsp_code; + u8 enh_disc_to_tgt; + u8 wwnn[8]; + u8 wwpn[8]; + __be16 iqid; + u8 fc_oui[3]; + u8 r_id[3]; + } fcoe_rdev; + struct iscsi_rdev_entry { + __be32 flowid; + u8 protocol; + u8 event_cause; + u8 flags; + u8 r3; + __be16 iscsi_opts; + __be16 tcp_opts; + __be16 ip_opts; + __be16 max_rcv_len; + __be16 max_snd_len; + __be16 first_brst_len; + __be16 max_brst_len; + __be16 r4; + __be16 def_time2wait; + __be16 def_time2ret; + __be16 nop_out_intrvl; + __be16 non_scsi_to; + __be16 isid; + __be16 tsid; + __be16 port; + __be16 tpgt; + u8 r5[6]; + __be16 iqid; + } iscsi_rdev; + } u; +}; + +#define FW_RDEV_WR_FLOWID_GET(x) (((x) >> 8) & 0xfffff) +#define FW_RDEV_WR_ASSOC_FLOWID_GET(x) (((x) >> 0) & 0xfffff) +#define FW_RDEV_WR_RPORT_TYPE_GET(x) (((x) >> 0) & 0x1f) +#define FW_RDEV_WR_NPIV_GET(x) (((x) >> 6) & 0x1) +#define FW_RDEV_WR_CLASS_GET(x) (((x) >> 4) & 0x3) +#define FW_RDEV_WR_TASK_RETRY_ID_GET(x) (((x) >> 5) & 0x1) +#define FW_RDEV_WR_RETRY_GET(x) (((x) >> 4) & 0x1) +#define FW_RDEV_WR_CONF_CMPL_GET(x) (((x) >> 3) & 0x1) +#define FW_RDEV_WR_INI_GET(x) (((x) >> 1) & 0x1) +#define FW_RDEV_WR_TGT_GET(x) (((x) >> 0) & 0x1) + +struct fw_fcoe_els_ct_wr { + __be32 op_immdlen; + __be32 flowid_len16; + u64 cookie; + __be16 iqid; + u8 tmo_val; + u8 els_ct_type; + u8 ctl_pri; + u8 cp_en_class; + __be16 xfer_cnt; + u8 fl_to_sp; + u8 l_id[3]; + u8 r5; + u8 r_id[3]; + __be64 rsp_dmaaddr; + __be32 rsp_dmalen; + __be32 r6; +}; + +#define FW_FCOE_ELS_CT_WR_OPCODE(x) ((x) << 24) +#define FW_FCOE_ELS_CT_WR_OPCODE_GET(x) (((x) >> 24) & 0xff) +#define FW_FCOE_ELS_CT_WR_IMMDLEN(x) ((x) << 0) +#define FW_FCOE_ELS_CT_WR_IMMDLEN_GET(x) (((x) >> 0) & 0xff) +#define FW_FCOE_ELS_CT_WR_SP(x) ((x) << 0) + +struct fw_scsi_write_wr { + __be32 op_immdlen; + __be32 flowid_len16; + u64 cookie; + __be16 iqid; + u8 tmo_val; + u8 use_xfer_cnt; + union fw_scsi_write_priv { + struct fcoe_write_priv { + u8 ctl_pri; + u8 cp_en_class; + u8 r3_lo[2]; + } fcoe; + struct iscsi_write_priv { + u8 r3[4]; + } iscsi; + } u; + __be32 xfer_cnt; + __be32 ini_xfer_cnt; + __be64 rsp_dmaaddr; + __be32 rsp_dmalen; + __be32 r4; +}; + +#define FW_SCSI_WRITE_WR_IMMDLEN(x) ((x) << 0) + +struct fw_scsi_read_wr { + __be32 op_immdlen; + __be32 flowid_len16; + u64 cookie; + __be16 iqid; + u8 tmo_val; + u8 use_xfer_cnt; + union fw_scsi_read_priv { + struct fcoe_read_priv { + u8 ctl_pri; + u8 cp_en_class; + u8 r3_lo[2]; + } fcoe; + struct iscsi_read_priv { + u8 r3[4]; + } iscsi; + } u; + __be32 xfer_cnt; + __be32 ini_xfer_cnt; + __be64 rsp_dmaaddr; + __be32 rsp_dmalen; + __be32 r4; +}; + +#define FW_SCSI_READ_WR_IMMDLEN(x) ((x) << 0) + +struct fw_scsi_cmd_wr { + __be32 op_immdlen; + __be32 flowid_len16; + u64 cookie; + __be16 iqid; + u8 tmo_val; + u8 r3; + union fw_scsi_cmd_priv { + struct fcoe_cmd_priv { + u8 ctl_pri; + u8 cp_en_class; + u8 r4_lo[2]; + } fcoe; + struct iscsi_cmd_priv { + u8 r4[4]; + } iscsi; + } u; + u8 r5[8]; + __be64 rsp_dmaaddr; + __be32 rsp_dmalen; + __be32 r6; +}; + +#define FW_SCSI_CMD_WR_IMMDLEN(x) ((x) << 0) + +#define SCSI_ABORT 0 +#define SCSI_CLOSE 1 + +struct fw_scsi_abrt_cls_wr { + __be32 op_immdlen; + __be32 flowid_len16; + u64 cookie; + __be16 iqid; + u8 tmo_val; + u8 sub_opcode_to_chk_all_io; + u8 r3[4]; + u64 t_cookie; +}; + +#define FW_SCSI_ABRT_CLS_WR_SUB_OPCODE(x) ((x) << 2) +#define FW_SCSI_ABRT_CLS_WR_SUB_OPCODE_GET(x) (((x) >> 2) & 0x3f) +#define FW_SCSI_ABRT_CLS_WR_CHK_ALL_IO(x) ((x) << 0) + +enum fw_cmd_stor_opcodes { + FW_FCOE_RES_INFO_CMD = 0x31, + FW_FCOE_LINK_CMD = 0x32, + FW_FCOE_VNP_CMD = 0x33, + FW_FCOE_SPARAMS_CMD = 0x35, + FW_FCOE_STATS_CMD = 0x37, + FW_FCOE_FCF_CMD = 0x38, +}; + +struct fw_fcoe_res_info_cmd { + __be32 op_to_read; + __be32 retval_len16; + __be16 e_d_tov; + __be16 r_a_tov_seq; + __be16 r_a_tov_els; + __be16 r_r_tov; + __be32 max_xchgs; + __be32 max_ssns; + __be32 used_xchgs; + __be32 used_ssns; + __be32 max_fcfs; + __be32 max_vnps; + __be32 used_fcfs; + __be32 used_vnps; +}; + +struct fw_fcoe_link_cmd { + __be32 op_to_portid; + __be32 retval_len16; + __be32 sub_opcode_fcfi; + u8 r3; + u8 lstatus; + __be16 flags; + u8 r4; + u8 set_vlan; + __be16 vlan_id; + __be32 vnpi_pkd; + __be16 r6; + u8 phy_mac[6]; + u8 vnport_wwnn[8]; + u8 vnport_wwpn[8]; +}; + +#define FW_FCOE_LINK_CMD_PORTID(x) ((x) << 0) +#define FW_FCOE_LINK_CMD_PORTID_GET(x) (((x) >> 0) & 0xf) +#define FW_FCOE_LINK_CMD_SUB_OPCODE(x) ((x) << 24U) +#define FW_FCOE_LINK_CMD_FCFI(x) ((x) << 0) +#define FW_FCOE_LINK_CMD_FCFI_GET(x) (((x) >> 0) & 0xffffff) +#define FW_FCOE_LINK_CMD_VNPI_GET(x) (((x) >> 0) & 0xfffff) + +struct fw_fcoe_vnp_cmd { + __be32 op_to_fcfi; + __be32 alloc_to_len16; + __be32 gen_wwn_to_vnpi; + __be32 vf_id; + __be16 iqid; + u8 vnport_mac[6]; + u8 vnport_wwnn[8]; + u8 vnport_wwpn[8]; + u8 cmn_srv_parms[16]; + u8 clsp_word_0_1[8]; +}; + +#define FW_FCOE_VNP_CMD_FCFI(x) ((x) << 0) +#define FW_FCOE_VNP_CMD_ALLOC (1U << 31) +#define FW_FCOE_VNP_CMD_FREE (1U << 30) +#define FW_FCOE_VNP_CMD_MODIFY (1U << 29) +#define FW_FCOE_VNP_CMD_GEN_WWN (1U << 22) +#define FW_FCOE_VNP_CMD_VFID_EN (1U << 20) +#define FW_FCOE_VNP_CMD_VNPI(x) ((x) << 0) +#define FW_FCOE_VNP_CMD_VNPI_GET(x) (((x) >> 0) & 0xfffff) + +struct fw_fcoe_sparams_cmd { + __be32 op_to_portid; + __be32 retval_len16; + u8 r3[7]; + u8 cos; + u8 lport_wwnn[8]; + u8 lport_wwpn[8]; + u8 cmn_srv_parms[16]; + u8 cls_srv_parms[16]; +}; + +#define FW_FCOE_SPARAMS_CMD_PORTID(x) ((x) << 0) + +struct fw_fcoe_stats_cmd { + __be32 op_to_flowid; + __be32 free_to_len16; + union fw_fcoe_stats { + struct fw_fcoe_stats_ctl { + u8 nstats_port; + u8 port_valid_ix; + __be16 r6; + __be32 r7; + __be64 stat0; + __be64 stat1; + __be64 stat2; + __be64 stat3; + __be64 stat4; + __be64 stat5; + } ctl; + struct fw_fcoe_port_stats { + __be64 tx_bcast_bytes; + __be64 tx_bcast_frames; + __be64 tx_mcast_bytes; + __be64 tx_mcast_frames; + __be64 tx_ucast_bytes; + __be64 tx_ucast_frames; + __be64 tx_drop_frames; + __be64 tx_offload_bytes; + __be64 tx_offload_frames; + __be64 rx_bcast_bytes; + __be64 rx_bcast_frames; + __be64 rx_mcast_bytes; + __be64 rx_mcast_frames; + __be64 rx_ucast_bytes; + __be64 rx_ucast_frames; + __be64 rx_err_frames; + } port_stats; + struct fw_fcoe_fcf_stats { + __be32 fip_tx_bytes; + __be32 fip_tx_fr; + __be64 fcf_ka; + __be64 mcast_adv_rcvd; + __be16 ucast_adv_rcvd; + __be16 sol_sent; + __be16 vlan_req; + __be16 vlan_rpl; + __be16 clr_vlink; + __be16 link_down; + __be16 link_up; + __be16 logo; + __be16 flogi_req; + __be16 flogi_rpl; + __be16 fdisc_req; + __be16 fdisc_rpl; + __be16 fka_prd_chg; + __be16 fc_map_chg; + __be16 vfid_chg; + u8 no_fka_req; + u8 no_vnp; + } fcf_stats; + struct fw_fcoe_pcb_stats { + __be64 tx_bytes; + __be64 tx_frames; + __be64 rx_bytes; + __be64 rx_frames; + __be32 vnp_ka; + __be32 unsol_els_rcvd; + __be64 unsol_cmd_rcvd; + __be16 implicit_logo; + __be16 flogi_inv_sparm; + __be16 fdisc_inv_sparm; + __be16 flogi_rjt; + __be16 fdisc_rjt; + __be16 no_ssn; + __be16 mac_flt_fail; + __be16 inv_fr_rcvd; + } pcb_stats; + struct fw_fcoe_scb_stats { + __be64 tx_bytes; + __be64 tx_frames; + __be64 rx_bytes; + __be64 rx_frames; + __be32 host_abrt_req; + __be32 adap_auto_abrt; + __be32 adap_abrt_rsp; + __be32 host_ios_req; + __be16 ssn_offl_ios; + __be16 ssn_not_rdy_ios; + u8 rx_data_ddp_err; + u8 ddp_flt_set_err; + __be16 rx_data_fr_err; + u8 bad_st_abrt_req; + u8 no_io_abrt_req; + u8 abort_tmo; + u8 abort_tmo_2; + __be32 abort_req; + u8 no_ppod_res_tmo; + u8 bp_tmo; + u8 adap_auto_cls; + u8 no_io_cls_req; + __be32 host_cls_req; + __be64 unsol_cmd_rcvd; + __be32 plogi_req_rcvd; + __be32 prli_req_rcvd; + __be16 logo_req_rcvd; + __be16 prlo_req_rcvd; + __be16 plogi_rjt_rcvd; + __be16 prli_rjt_rcvd; + __be32 adisc_req_rcvd; + __be32 rscn_rcvd; + __be32 rrq_req_rcvd; + __be32 unsol_els_rcvd; + u8 adisc_rjt_rcvd; + u8 scr_rjt; + u8 ct_rjt; + u8 inval_bls_rcvd; + __be32 ba_rjt_rcvd; + } scb_stats; + } u; +}; + +#define FW_FCOE_STATS_CMD_FLOWID(x) ((x) << 0) +#define FW_FCOE_STATS_CMD_FREE (1U << 30) +#define FW_FCOE_STATS_CMD_NSTATS(x) ((x) << 4) +#define FW_FCOE_STATS_CMD_PORT(x) ((x) << 0) +#define FW_FCOE_STATS_CMD_PORT_VALID (1U << 7) +#define FW_FCOE_STATS_CMD_IX(x) ((x) << 0) + +struct fw_fcoe_fcf_cmd { + __be32 op_to_fcfi; + __be32 retval_len16; + __be16 priority_pkd; + u8 mac[6]; + u8 name_id[8]; + u8 fabric[8]; + __be16 vf_id; + __be16 max_fcoe_size; + u8 vlan_id; + u8 fc_map[3]; + __be32 fka_adv; + __be32 r6; + u8 r7_hi; + u8 fpma_to_portid; + u8 spma_mac[6]; + __be64 r8; +}; + +#define FW_FCOE_FCF_CMD_FCFI(x) ((x) << 0) +#define FW_FCOE_FCF_CMD_FCFI_GET(x) (((x) >> 0) & 0xfffff) +#define FW_FCOE_FCF_CMD_PRIORITY_GET(x) (((x) >> 0) & 0xff) +#define FW_FCOE_FCF_CMD_FPMA_GET(x) (((x) >> 6) & 0x1) +#define FW_FCOE_FCF_CMD_SPMA_GET(x) (((x) >> 5) & 0x1) +#define FW_FCOE_FCF_CMD_LOGIN_GET(x) (((x) >> 4) & 0x1) +#define FW_FCOE_FCF_CMD_PORTID_GET(x) (((x) >> 0) & 0xf) + +#endif /* _T4FW_API_STOR_H_ */ diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 192724e..138e573 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -1,6 +1,6 @@ /* * HighPoint RR3xxx/4xxx controller driver for Linux - * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved. + * Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,7 +42,7 @@ MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx/4xxx Controller Driver"); static char driver_name[] = "hptiop"; static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver"; -static const char driver_ver[] = "v1.6 (091225)"; +static const char driver_ver[] = "v1.8"; static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec); static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, @@ -77,6 +77,11 @@ static int iop_wait_ready_mv(struct hptiop_hba *hba, u32 millisec) return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec); } +static int iop_wait_ready_mvfrey(struct hptiop_hba *hba, u32 millisec) +{ + return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec); +} + static void hptiop_request_callback_itl(struct hptiop_hba *hba, u32 tag) { if (tag & IOPMU_QUEUE_ADDR_HOST_BIT) @@ -230,6 +235,74 @@ static int iop_intr_mv(struct hptiop_hba *hba) return ret; } +static void hptiop_request_callback_mvfrey(struct hptiop_hba *hba, u32 _tag) +{ + u32 req_type = _tag & 0xf; + struct hpt_iop_request_scsi_command *req; + + switch (req_type) { + case IOP_REQUEST_TYPE_GET_CONFIG: + case IOP_REQUEST_TYPE_SET_CONFIG: + hba->msg_done = 1; + break; + + case IOP_REQUEST_TYPE_SCSI_COMMAND: + req = hba->reqs[(_tag >> 4) & 0xff].req_virt; + if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT)) + req->header.result = IOP_RESULT_SUCCESS; + hptiop_finish_scsi_req(hba, (_tag >> 4) & 0xff, req); + break; + + default: + break; + } +} + +static int iop_intr_mvfrey(struct hptiop_hba *hba) +{ + u32 _tag, status, cptr, cur_rptr; + int ret = 0; + + if (hba->initialized) + writel(0, &(hba->u.mvfrey.mu->pcie_f0_int_enable)); + + status = readl(&(hba->u.mvfrey.mu->f0_doorbell)); + if (status) { + writel(status, &(hba->u.mvfrey.mu->f0_doorbell)); + if (status & CPU_TO_F0_DRBL_MSG_BIT) { + u32 msg = readl(&(hba->u.mvfrey.mu->cpu_to_f0_msg_a)); + dprintk("received outbound msg %x\n", msg); + hptiop_message_callback(hba, msg); + } + ret = 1; + } + + status = readl(&(hba->u.mvfrey.mu->isr_cause)); + if (status) { + writel(status, &(hba->u.mvfrey.mu->isr_cause)); + do { + cptr = *hba->u.mvfrey.outlist_cptr & 0xff; + cur_rptr = hba->u.mvfrey.outlist_rptr; + while (cur_rptr != cptr) { + cur_rptr++; + if (cur_rptr == hba->u.mvfrey.list_count) + cur_rptr = 0; + + _tag = hba->u.mvfrey.outlist[cur_rptr].val; + BUG_ON(!(_tag & IOPMU_QUEUE_MASK_HOST_BITS)); + hptiop_request_callback_mvfrey(hba, _tag); + ret = 1; + } + hba->u.mvfrey.outlist_rptr = cur_rptr; + } while (cptr != (*hba->u.mvfrey.outlist_cptr & 0xff)); + } + + if (hba->initialized) + writel(0x1010, &(hba->u.mvfrey.mu->pcie_f0_int_enable)); + + return ret; +} + static int iop_send_sync_request_itl(struct hptiop_hba *hba, void __iomem *_req, u32 millisec) { @@ -272,6 +345,26 @@ static int iop_send_sync_request_mv(struct hptiop_hba *hba, return -1; } +static int iop_send_sync_request_mvfrey(struct hptiop_hba *hba, + u32 size_bits, u32 millisec) +{ + struct hpt_iop_request_header *reqhdr = + hba->u.mvfrey.internal_req.req_virt; + u32 i; + + hba->msg_done = 0; + reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_SYNC_REQUEST); + hba->ops->post_req(hba, &(hba->u.mvfrey.internal_req)); + + for (i = 0; i < millisec; i++) { + iop_intr_mvfrey(hba); + if (hba->msg_done) + break; + msleep(1); + } + return hba->msg_done ? 0 : -1; +} + static void hptiop_post_msg_itl(struct hptiop_hba *hba, u32 msg) { writel(msg, &hba->u.itl.iop->inbound_msgaddr0); @@ -285,11 +378,18 @@ static void hptiop_post_msg_mv(struct hptiop_hba *hba, u32 msg) readl(&hba->u.mv.regs->inbound_doorbell); } +static void hptiop_post_msg_mvfrey(struct hptiop_hba *hba, u32 msg) +{ + writel(msg, &(hba->u.mvfrey.mu->f0_to_cpu_msg_a)); + readl(&(hba->u.mvfrey.mu->f0_to_cpu_msg_a)); +} + static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) { u32 i; hba->msg_done = 0; + hba->ops->disable_intr(hba); hba->ops->post_msg(hba, msg); for (i = 0; i < millisec; i++) { @@ -301,6 +401,7 @@ static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) msleep(1); } + hba->ops->enable_intr(hba); return hba->msg_done? 0 : -1; } @@ -354,6 +455,28 @@ static int iop_get_config_mv(struct hptiop_hba *hba, return 0; } +static int iop_get_config_mvfrey(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config) +{ + struct hpt_iop_request_get_config *info = hba->u.mvfrey.config; + + if (info->header.size != sizeof(struct hpt_iop_request_get_config) || + info->header.type != IOP_REQUEST_TYPE_GET_CONFIG) + return -1; + + config->interface_version = info->interface_version; + config->firmware_version = info->firmware_version; + config->max_requests = info->max_requests; + config->request_size = info->request_size; + config->max_sg_count = info->max_sg_count; + config->data_transfer_length = info->data_transfer_length; + config->alignment_mask = info->alignment_mask; + config->max_devices = info->max_devices; + config->sdram_size = info->sdram_size; + + return 0; +} + static int iop_set_config_itl(struct hptiop_hba *hba, struct hpt_iop_request_set_config *config) { @@ -408,6 +531,29 @@ static int iop_set_config_mv(struct hptiop_hba *hba, return 0; } +static int iop_set_config_mvfrey(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config) +{ + struct hpt_iop_request_set_config *req = + hba->u.mvfrey.internal_req.req_virt; + + memcpy(req, config, sizeof(struct hpt_iop_request_set_config)); + req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); + req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG); + req->header.size = + cpu_to_le32(sizeof(struct hpt_iop_request_set_config)); + req->header.result = cpu_to_le32(IOP_RESULT_PENDING); + req->header.context = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG<<5); + req->header.context_hi32 = 0; + + if (iop_send_sync_request_mvfrey(hba, 0, 20000)) { + dprintk("Set config send cmd failed\n"); + return -1; + } + + return 0; +} + static void hptiop_enable_intr_itl(struct hptiop_hba *hba) { writel(~(IOPMU_OUTBOUND_INT_POSTQUEUE | IOPMU_OUTBOUND_INT_MSG0), @@ -420,6 +566,13 @@ static void hptiop_enable_intr_mv(struct hptiop_hba *hba) &hba->u.mv.regs->outbound_intmask); } +static void hptiop_enable_intr_mvfrey(struct hptiop_hba *hba) +{ + writel(CPU_TO_F0_DRBL_MSG_BIT, &(hba->u.mvfrey.mu->f0_doorbell_enable)); + writel(0x1, &(hba->u.mvfrey.mu->isr_enable)); + writel(0x1010, &(hba->u.mvfrey.mu->pcie_f0_int_enable)); +} + static int hptiop_initialize_iop(struct hptiop_hba *hba) { /* enable interrupts */ @@ -502,17 +655,39 @@ static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) return 0; } +static int hptiop_map_pci_bar_mvfrey(struct hptiop_hba *hba) +{ + hba->u.mvfrey.config = hptiop_map_pci_bar(hba, 0); + if (hba->u.mvfrey.config == NULL) + return -1; + + hba->u.mvfrey.mu = hptiop_map_pci_bar(hba, 2); + if (hba->u.mvfrey.mu == NULL) { + iounmap(hba->u.mvfrey.config); + return -1; + } + + return 0; +} + static void hptiop_unmap_pci_bar_mv(struct hptiop_hba *hba) { iounmap(hba->u.mv.regs); iounmap(hba->u.mv.mu); } +static void hptiop_unmap_pci_bar_mvfrey(struct hptiop_hba *hba) +{ + iounmap(hba->u.mvfrey.config); + iounmap(hba->u.mvfrey.mu); +} + static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg) { dprintk("iop message 0x%x\n", msg); - if (msg == IOPMU_INBOUND_MSG0_NOP) + if (msg == IOPMU_INBOUND_MSG0_NOP || + msg == IOPMU_INBOUND_MSG0_RESET_COMM) hba->msg_done = 1; if (!hba->initialized) @@ -592,6 +767,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, memcpy(scp->sense_buffer, &req->sg_list, min_t(size_t, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(req->dataxfer_length))); + goto skip_resid; break; default: @@ -599,6 +775,10 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, break; } + scsi_set_resid(scp, + scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); + +skip_resid: dprintk("scsi_done(%p)\n", scp); scp->scsi_done(scp); free_req(hba, &hba->reqs[tag]); @@ -692,7 +872,8 @@ static int hptiop_buildsgl(struct scsi_cmnd *scp, struct hpt_iopsg *psg) BUG_ON(HPT_SCP(scp)->sgcnt > hba->max_sg_descriptors); scsi_for_each_sg(scp, sg, HPT_SCP(scp)->sgcnt, idx) { - psg[idx].pci_address = cpu_to_le64(sg_dma_address(sg)); + psg[idx].pci_address = cpu_to_le64(sg_dma_address(sg)) | + hba->ops->host_phy_flag; psg[idx].size = cpu_to_le32(sg_dma_len(sg)); psg[idx].eot = (idx == HPT_SCP(scp)->sgcnt - 1) ? cpu_to_le32(1) : 0; @@ -751,6 +932,78 @@ static void hptiop_post_req_mv(struct hptiop_hba *hba, MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba); } +static void hptiop_post_req_mvfrey(struct hptiop_hba *hba, + struct hptiop_request *_req) +{ + struct hpt_iop_request_header *reqhdr = _req->req_virt; + u32 index; + + reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT | + IOP_REQUEST_FLAG_ADDR_BITS | + ((_req->req_shifted_phy >> 11) & 0xffff0000)); + reqhdr->context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT | + (_req->index << 4) | reqhdr->type); + reqhdr->context_hi32 = cpu_to_le32((_req->req_shifted_phy << 5) & + 0xffffffff); + + hba->u.mvfrey.inlist_wptr++; + index = hba->u.mvfrey.inlist_wptr & 0x3fff; + + if (index == hba->u.mvfrey.list_count) { + index = 0; + hba->u.mvfrey.inlist_wptr &= ~0x3fff; + hba->u.mvfrey.inlist_wptr ^= CL_POINTER_TOGGLE; + } + + hba->u.mvfrey.inlist[index].addr = + (dma_addr_t)_req->req_shifted_phy << 5; + hba->u.mvfrey.inlist[index].intrfc_len = (reqhdr->size + 3) / 4; + writel(hba->u.mvfrey.inlist_wptr, + &(hba->u.mvfrey.mu->inbound_write_ptr)); + readl(&(hba->u.mvfrey.mu->inbound_write_ptr)); +} + +static int hptiop_reset_comm_itl(struct hptiop_hba *hba) +{ + return 0; +} + +static int hptiop_reset_comm_mv(struct hptiop_hba *hba) +{ + return 0; +} + +static int hptiop_reset_comm_mvfrey(struct hptiop_hba *hba) +{ + u32 list_count = hba->u.mvfrey.list_count; + + if (iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_RESET_COMM, 3000)) + return -1; + + /* wait 100ms for MCU ready */ + msleep(100); + + writel(cpu_to_le32(hba->u.mvfrey.inlist_phy & 0xffffffff), + &(hba->u.mvfrey.mu->inbound_base)); + writel(cpu_to_le32((hba->u.mvfrey.inlist_phy >> 16) >> 16), + &(hba->u.mvfrey.mu->inbound_base_high)); + + writel(cpu_to_le32(hba->u.mvfrey.outlist_phy & 0xffffffff), + &(hba->u.mvfrey.mu->outbound_base)); + writel(cpu_to_le32((hba->u.mvfrey.outlist_phy >> 16) >> 16), + &(hba->u.mvfrey.mu->outbound_base_high)); + + writel(cpu_to_le32(hba->u.mvfrey.outlist_cptr_phy & 0xffffffff), + &(hba->u.mvfrey.mu->outbound_shadow_base)); + writel(cpu_to_le32((hba->u.mvfrey.outlist_cptr_phy >> 16) >> 16), + &(hba->u.mvfrey.mu->outbound_shadow_base_high)); + + hba->u.mvfrey.inlist_wptr = (list_count - 1) | CL_POINTER_TOGGLE; + *hba->u.mvfrey.outlist_cptr = (list_count - 1) | CL_POINTER_TOGGLE; + hba->u.mvfrey.outlist_rptr = list_count - 1; + return 0; +} + static int hptiop_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { @@ -771,14 +1024,15 @@ static int hptiop_queuecommand_lck(struct scsi_cmnd *scp, _req->scp = scp; - dprintk("hptiop_queuecmd(scp=%p) %d/%d/%d/%d cdb=(%x-%x-%x) " + dprintk("hptiop_queuecmd(scp=%p) %d/%d/%d/%d cdb=(%08x-%08x-%08x-%08x) " "req_index=%d, req=%p\n", scp, host->host_no, scp->device->channel, scp->device->id, scp->device->lun, - ((u32 *)scp->cmnd)[0], - ((u32 *)scp->cmnd)[1], - ((u32 *)scp->cmnd)[2], + cpu_to_be32(((u32 *)scp->cmnd)[0]), + cpu_to_be32(((u32 *)scp->cmnd)[1]), + cpu_to_be32(((u32 *)scp->cmnd)[2]), + cpu_to_be32(((u32 *)scp->cmnd)[3]), _req->index, _req->req_virt); scp->result = 0; @@ -933,6 +1187,11 @@ static struct scsi_host_template driver_template = { .change_queue_depth = hptiop_adjust_disk_queue_depth, }; +static int hptiop_internal_memalloc_itl(struct hptiop_hba *hba) +{ + return 0; +} + static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba) { hba->u.mv.internal_req = dma_alloc_coherent(&hba->pcidev->dev, @@ -943,6 +1202,63 @@ static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba) return -1; } +static int hptiop_internal_memalloc_mvfrey(struct hptiop_hba *hba) +{ + u32 list_count = readl(&hba->u.mvfrey.mu->inbound_conf_ctl); + char *p; + dma_addr_t phy; + + BUG_ON(hba->max_request_size == 0); + + if (list_count == 0) { + BUG_ON(1); + return -1; + } + + list_count >>= 16; + + hba->u.mvfrey.list_count = list_count; + hba->u.mvfrey.internal_mem_size = 0x800 + + list_count * sizeof(struct mvfrey_inlist_entry) + + list_count * sizeof(struct mvfrey_outlist_entry) + + sizeof(int); + + p = dma_alloc_coherent(&hba->pcidev->dev, + hba->u.mvfrey.internal_mem_size, &phy, GFP_KERNEL); + if (!p) + return -1; + + hba->u.mvfrey.internal_req.req_virt = p; + hba->u.mvfrey.internal_req.req_shifted_phy = phy >> 5; + hba->u.mvfrey.internal_req.scp = NULL; + hba->u.mvfrey.internal_req.next = NULL; + + p += 0x800; + phy += 0x800; + + hba->u.mvfrey.inlist = (struct mvfrey_inlist_entry *)p; + hba->u.mvfrey.inlist_phy = phy; + + p += list_count * sizeof(struct mvfrey_inlist_entry); + phy += list_count * sizeof(struct mvfrey_inlist_entry); + + hba->u.mvfrey.outlist = (struct mvfrey_outlist_entry *)p; + hba->u.mvfrey.outlist_phy = phy; + + p += list_count * sizeof(struct mvfrey_outlist_entry); + phy += list_count * sizeof(struct mvfrey_outlist_entry); + + hba->u.mvfrey.outlist_cptr = (__le32 *)p; + hba->u.mvfrey.outlist_cptr_phy = phy; + + return 0; +} + +static int hptiop_internal_memfree_itl(struct hptiop_hba *hba) +{ + return 0; +} + static int hptiop_internal_memfree_mv(struct hptiop_hba *hba) { if (hba->u.mv.internal_req) { @@ -953,6 +1269,19 @@ static int hptiop_internal_memfree_mv(struct hptiop_hba *hba) return -1; } +static int hptiop_internal_memfree_mvfrey(struct hptiop_hba *hba) +{ + if (hba->u.mvfrey.internal_req.req_virt) { + dma_free_coherent(&hba->pcidev->dev, + hba->u.mvfrey.internal_mem_size, + hba->u.mvfrey.internal_req.req_virt, + (dma_addr_t) + hba->u.mvfrey.internal_req.req_shifted_phy << 5); + return 0; + } else + return -1; +} + static int __devinit hptiop_probe(struct pci_dev *pcidev, const struct pci_device_id *id) { @@ -1027,7 +1356,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, goto unmap_pci_bar; } - if (hba->ops->internal_memalloc) { + if (hba->ops->family == MV_BASED_IOP) { if (hba->ops->internal_memalloc(hba)) { printk(KERN_ERR "scsi%d: internal_memalloc failed\n", hba->host->host_no); @@ -1050,6 +1379,19 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, hba->interface_version = le32_to_cpu(iop_config.interface_version); hba->sdram_size = le32_to_cpu(iop_config.sdram_size); + if (hba->ops->family == MVFREY_BASED_IOP) { + if (hba->ops->internal_memalloc(hba)) { + printk(KERN_ERR "scsi%d: internal_memalloc failed\n", + hba->host->host_no); + goto unmap_pci_bar; + } + if (hba->ops->reset_comm(hba)) { + printk(KERN_ERR "scsi%d: reset comm failed\n", + hba->host->host_no); + goto unmap_pci_bar; + } + } + if (hba->firmware_version > 0x01020000 || hba->interface_version > 0x01020000) hba->iopintf_v2 = 1; @@ -1104,14 +1446,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, hba->dma_coherent = start_virt; hba->dma_coherent_handle = start_phy; - if ((start_phy & 0x1f) != 0) - { + if ((start_phy & 0x1f) != 0) { offset = ((start_phy + 0x1f) & ~0x1f) - start_phy; start_phy += offset; start_virt += offset; } - hba->req_list = start_virt; + hba->req_list = NULL; for (i = 0; i < hba->max_requests; i++) { hba->reqs[i].next = NULL; hba->reqs[i].req_virt = start_virt; @@ -1132,7 +1473,6 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, goto free_request_mem; } - scsi_scan_host(host); dprintk("scsi%d: hptiop_probe successfully\n", hba->host->host_no); @@ -1147,8 +1487,7 @@ free_request_irq: free_irq(hba->pcidev->irq, hba); unmap_pci_bar: - if (hba->ops->internal_memfree) - hba->ops->internal_memfree(hba); + hba->ops->internal_memfree(hba); hba->ops->unmap_pci_bar(hba); @@ -1198,6 +1537,16 @@ static void hptiop_disable_intr_mv(struct hptiop_hba *hba) readl(&hba->u.mv.regs->outbound_intmask); } +static void hptiop_disable_intr_mvfrey(struct hptiop_hba *hba) +{ + writel(0, &(hba->u.mvfrey.mu->f0_doorbell_enable)); + readl(&(hba->u.mvfrey.mu->f0_doorbell_enable)); + writel(0, &(hba->u.mvfrey.mu->isr_enable)); + readl(&(hba->u.mvfrey.mu->isr_enable)); + writel(0, &(hba->u.mvfrey.mu->pcie_f0_int_enable)); + readl(&(hba->u.mvfrey.mu->pcie_f0_int_enable)); +} + static void hptiop_remove(struct pci_dev *pcidev) { struct Scsi_Host *host = pci_get_drvdata(pcidev); @@ -1216,8 +1565,7 @@ static void hptiop_remove(struct pci_dev *pcidev) hba->dma_coherent, hba->dma_coherent_handle); - if (hba->ops->internal_memfree) - hba->ops->internal_memfree(hba); + hba->ops->internal_memfree(hba); hba->ops->unmap_pci_bar(hba); @@ -1229,9 +1577,10 @@ static void hptiop_remove(struct pci_dev *pcidev) } static struct hptiop_adapter_ops hptiop_itl_ops = { + .family = INTEL_BASED_IOP, .iop_wait_ready = iop_wait_ready_itl, - .internal_memalloc = NULL, - .internal_memfree = NULL, + .internal_memalloc = hptiop_internal_memalloc_itl, + .internal_memfree = hptiop_internal_memfree_itl, .map_pci_bar = hptiop_map_pci_bar_itl, .unmap_pci_bar = hptiop_unmap_pci_bar_itl, .enable_intr = hptiop_enable_intr_itl, @@ -1242,9 +1591,12 @@ static struct hptiop_adapter_ops hptiop_itl_ops = { .post_msg = hptiop_post_msg_itl, .post_req = hptiop_post_req_itl, .hw_dma_bit_mask = 64, + .reset_comm = hptiop_reset_comm_itl, + .host_phy_flag = cpu_to_le64(0), }; static struct hptiop_adapter_ops hptiop_mv_ops = { + .family = MV_BASED_IOP, .iop_wait_ready = iop_wait_ready_mv, .internal_memalloc = hptiop_internal_memalloc_mv, .internal_memfree = hptiop_internal_memfree_mv, @@ -1258,6 +1610,27 @@ static struct hptiop_adapter_ops hptiop_mv_ops = { .post_msg = hptiop_post_msg_mv, .post_req = hptiop_post_req_mv, .hw_dma_bit_mask = 33, + .reset_comm = hptiop_reset_comm_mv, + .host_phy_flag = cpu_to_le64(0), +}; + +static struct hptiop_adapter_ops hptiop_mvfrey_ops = { + .family = MVFREY_BASED_IOP, + .iop_wait_ready = iop_wait_ready_mvfrey, + .internal_memalloc = hptiop_internal_memalloc_mvfrey, + .internal_memfree = hptiop_internal_memfree_mvfrey, + .map_pci_bar = hptiop_map_pci_bar_mvfrey, + .unmap_pci_bar = hptiop_unmap_pci_bar_mvfrey, + .enable_intr = hptiop_enable_intr_mvfrey, + .disable_intr = hptiop_disable_intr_mvfrey, + .get_config = iop_get_config_mvfrey, + .set_config = iop_set_config_mvfrey, + .iop_intr = iop_intr_mvfrey, + .post_msg = hptiop_post_msg_mvfrey, + .post_req = hptiop_post_req_mvfrey, + .hw_dma_bit_mask = 64, + .reset_comm = hptiop_reset_comm_mvfrey, + .host_phy_flag = cpu_to_le64(1), }; static struct pci_device_id hptiop_id_table[] = { @@ -1283,6 +1656,8 @@ static struct pci_device_id hptiop_id_table[] = { { PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops }, { PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops }, { PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops }, + { PCI_VDEVICE(TTI, 0x4520), (kernel_ulong_t)&hptiop_mvfrey_ops }, + { PCI_VDEVICE(TTI, 0x4522), (kernel_ulong_t)&hptiop_mvfrey_ops }, {}, }; diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h index baa648d..020619d 100644 --- a/drivers/scsi/hptiop.h +++ b/drivers/scsi/hptiop.h @@ -1,6 +1,6 @@ /* * HighPoint RR3xxx/4xxx controller driver for Linux - * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved. + * Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -75,6 +75,45 @@ struct hpt_iopmv_regs { __le32 outbound_intmask; }; +#pragma pack(1) +struct hpt_iopmu_mvfrey { + __le32 reserved0[(0x4000 - 0) / 4]; + __le32 inbound_base; + __le32 inbound_base_high; + __le32 reserved1[(0x4018 - 0x4008) / 4]; + __le32 inbound_write_ptr; + __le32 reserved2[(0x402c - 0x401c) / 4]; + __le32 inbound_conf_ctl; + __le32 reserved3[(0x4050 - 0x4030) / 4]; + __le32 outbound_base; + __le32 outbound_base_high; + __le32 outbound_shadow_base; + __le32 outbound_shadow_base_high; + __le32 reserved4[(0x4088 - 0x4060) / 4]; + __le32 isr_cause; + __le32 isr_enable; + __le32 reserved5[(0x1020c - 0x4090) / 4]; + __le32 pcie_f0_int_enable; + __le32 reserved6[(0x10400 - 0x10210) / 4]; + __le32 f0_to_cpu_msg_a; + __le32 reserved7[(0x10420 - 0x10404) / 4]; + __le32 cpu_to_f0_msg_a; + __le32 reserved8[(0x10480 - 0x10424) / 4]; + __le32 f0_doorbell; + __le32 f0_doorbell_enable; +}; + +struct mvfrey_inlist_entry { + dma_addr_t addr; + __le32 intrfc_len; + __le32 reserved; +}; + +struct mvfrey_outlist_entry { + __le32 val; +}; +#pragma pack() + #define MVIOP_MU_QUEUE_ADDR_HOST_MASK (~(0x1full)) #define MVIOP_MU_QUEUE_ADDR_HOST_BIT 4 @@ -87,6 +126,9 @@ struct hpt_iopmv_regs { #define MVIOP_MU_OUTBOUND_INT_MSG 1 #define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2 +#define CL_POINTER_TOGGLE 0x00004000 +#define CPU_TO_F0_DRBL_MSG_BIT 0x02000000 + enum hpt_iopmu_message { /* host-to-iop messages */ IOPMU_INBOUND_MSG0_NOP = 0, @@ -95,6 +137,7 @@ enum hpt_iopmu_message { IOPMU_INBOUND_MSG0_SHUTDOWN, IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK, IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK, + IOPMU_INBOUND_MSG0_RESET_COMM, IOPMU_INBOUND_MSG0_MAX = 0xff, /* iop-to-host messages */ IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100, @@ -118,6 +161,7 @@ struct hpt_iop_request_header { #define IOP_REQUEST_FLAG_BIST_REQUEST 2 #define IOP_REQUEST_FLAG_REMAPPED 4 #define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8 +#define IOP_REQUEST_FLAG_ADDR_BITS 0x40 /* flags[31:16] is phy_addr[47:32] */ enum hpt_iop_request_type { IOP_REQUEST_TYPE_GET_CONFIG = 0, @@ -223,6 +267,13 @@ struct hpt_scsi_pointer { #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp) +enum hptiop_family { + UNKNOWN_BASED_IOP, + INTEL_BASED_IOP, + MV_BASED_IOP, + MVFREY_BASED_IOP +} ; + struct hptiop_hba { struct hptiop_adapter_ops *ops; union { @@ -236,6 +287,22 @@ struct hptiop_hba { void *internal_req; dma_addr_t internal_req_phy; } mv; + struct { + struct hpt_iop_request_get_config __iomem *config; + struct hpt_iopmu_mvfrey __iomem *mu; + + int internal_mem_size; + struct hptiop_request internal_req; + int list_count; + struct mvfrey_inlist_entry *inlist; + dma_addr_t inlist_phy; + __le32 inlist_wptr; + struct mvfrey_outlist_entry *outlist; + dma_addr_t outlist_phy; + __le32 *outlist_cptr; /* copy pointer shadow */ + dma_addr_t outlist_cptr_phy; + __le32 outlist_rptr; + } mvfrey; } u; struct Scsi_Host *host; @@ -283,6 +350,7 @@ struct hpt_ioctl_k { }; struct hptiop_adapter_ops { + enum hptiop_family family; int (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec); int (*internal_memalloc)(struct hptiop_hba *hba); int (*internal_memfree)(struct hptiop_hba *hba); @@ -298,6 +366,8 @@ struct hptiop_adapter_ops { void (*post_msg)(struct hptiop_hba *hba, u32 msg); void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req); int hw_dma_bit_mask; + int (*reset_comm)(struct hptiop_hba *hba); + __le64 host_phy_flag; }; #define HPT_IOCTL_RESULT_OK 0 diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 69b5993..df4c13a 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -689,6 +689,7 @@ struct lpfc_hba { #define LPFC_FCF_PRIORITY 2 /* Priority fcf failover */ uint32_t cfg_fcf_failover_policy; uint32_t cfg_fcp_io_sched; + uint32_t cfg_fcp2_no_tgt_reset; uint32_t cfg_cr_delay; uint32_t cfg_cr_count; uint32_t cfg_multi_ring_support; @@ -714,6 +715,7 @@ struct lpfc_hba { uint32_t cfg_log_verbose; uint32_t cfg_aer_support; uint32_t cfg_sriov_nr_virtfn; + uint32_t cfg_request_firmware_upgrade; uint32_t cfg_iocb_cnt; uint32_t cfg_suppress_link_up; #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index ad16e54..a364cae 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3618,6 +3618,77 @@ static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); /** + * lpfc_request_firmware_store - Request for Linux generic firmware upgrade + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string the number of vfs to be enabled. + * @count: unused variable. + * + * Description: + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_request_firmware_upgrade_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, rc = -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val != 1) + return -EINVAL; + + rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE); + if (rc) + rc = -EPERM; + else + rc = strlen(buf); + return rc; +} + +static int lpfc_req_fw_upgrade; +module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade"); +lpfc_param_show(request_firmware_upgrade) + +/** + * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade + * @phba: lpfc_hba pointer. + * @val: 0 or 1. + * + * Description: + * Set the initial Linux generic firmware upgrade enable or disable flag. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val) +{ + if (val >= 0 && val <= 1) { + phba->cfg_request_firmware_upgrade = val; + return 0; + } + return -EINVAL; +} +static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR, + lpfc_request_firmware_upgrade_show, + lpfc_request_firmware_upgrade_store); + +/** * lpfc_fcp_imax_store * * @dev: class device that is converted into a Scsi_host. @@ -3788,6 +3859,16 @@ LPFC_ATTR_RW(fcp_io_sched, 0, 0, 1, "Determine scheduling algrithmn for " "issuing commands [0] - Round Robin, [1] - Current CPU"); /* +# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior +# range is [0,1]. Default value is 0. +# For [0], bus reset issues target reset to ALL devices +# For [1], bus reset issues target reset to non-FCP2 devices +*/ +LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for " + "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset"); + + +/* # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing # cr_delay (msec) or cr_count outstanding commands. cr_delay can take # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay @@ -4029,6 +4110,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_scan_down, &dev_attr_lpfc_link_speed, &dev_attr_lpfc_fcp_io_sched, + &dev_attr_lpfc_fcp2_no_tgt_reset, &dev_attr_lpfc_cr_delay, &dev_attr_lpfc_cr_count, &dev_attr_lpfc_multi_ring_support, @@ -4069,6 +4151,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_aer_support, &dev_attr_lpfc_aer_state_cleanup, &dev_attr_lpfc_sriov_nr_virtfn, + &dev_attr_lpfc_req_fw_upgrade, &dev_attr_lpfc_suppress_link_up, &dev_attr_lpfc_iocb_cnt, &dev_attr_iocb_hw, @@ -5019,6 +5102,7 @@ void lpfc_get_cfgparam(struct lpfc_hba *phba) { lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched); + lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset); lpfc_cr_delay_init(phba, lpfc_cr_delay); lpfc_cr_count_init(phba, lpfc_cr_count); lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support); @@ -5051,6 +5135,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); lpfc_aer_support_init(phba, lpfc_aer_support); lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); + lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade); lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt); phba->cfg_enable_dss = 1; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 4380a44..69d66e3 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -468,3 +468,4 @@ void lpfc_sli4_node_prep(struct lpfc_hba *); int lpfc_sli4_xri_sgl_update(struct lpfc_hba *); void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *); uint32_t lpfc_sli_port_speed_get(struct lpfc_hba *); +int lpfc_sli4_request_firmware_update(struct lpfc_hba *, uint8_t); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 7ffabb7..65f9fb6 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -634,7 +634,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* Check for retry */ if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { if (irsp->ulpStatus != IOSTAT_LOCAL_REJECT || - (irsp->un.ulpWord[4] && IOERR_PARAM_MASK) != + (irsp->un.ulpWord[4] & IOERR_PARAM_MASK) != IOERR_NO_RESOURCES) vport->fc_ns_retry++; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f19e9b6..b9440de 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1182,8 +1182,6 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, sp->cmn.w2.r_a_tov = 0; sp->cmn.virtual_fabric_support = 0; sp->cls1.classValid = 0; - sp->cls2.seqDelivery = 1; - sp->cls3.seqDelivery = 1; if (sp->cmn.fcphLow < FC_PH3) sp->cmn.fcphLow = FC_PH3; if (sp->cmn.fcphHigh < FC_PH3) @@ -1198,7 +1196,13 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, /* Set the fcfi to the fcfi we registered with */ elsiocb->iocb.ulpContext = phba->fcf.fcfi; } + /* Can't do SLI4 class2 without support sequence coalescing */ + sp->cls2.classValid = 0; + sp->cls2.seqDelivery = 0; } else { + /* Historical, setting sequential-delivery bit for SLI3 */ + sp->cls2.seqDelivery = (sp->cls2.classValid) ? 1 : 0; + sp->cls3.seqDelivery = (sp->cls3.classValid) ? 1 : 0; if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) { sp->cmn.request_multiple_Nport = 1; /* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */ diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 2cdeb54..a47cfbd 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -3219,6 +3219,9 @@ struct wqe_common { #define wqe_dif_SHIFT 0 #define wqe_dif_MASK 0x00000003 #define wqe_dif_WORD word7 +#define LPFC_WQE_DIF_PASSTHRU 1 +#define LPFC_WQE_DIF_STRIP 2 +#define LPFC_WQE_DIF_INSERT 3 #define wqe_ct_SHIFT 2 #define wqe_ct_MASK 0x00000003 #define wqe_ct_WORD word7 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 7dc4218..c20eec7 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3854,7 +3854,7 @@ static void lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) { char port_name; - char message[80]; + char message[128]; uint8_t status; struct lpfc_acqe_misconfigured_event *misconfigured; @@ -9450,7 +9450,7 @@ lpfc_write_firmware(const struct firmware *fw, void *context) struct lpfc_dmabuf *dmabuf, *next; uint32_t offset = 0, temp_offset = 0; - /* It can be null, sanity check */ + /* It can be null in no-wait mode, sanity check */ if (!fw) { rc = -ENXIO; goto out; @@ -9528,11 +9528,48 @@ release_out: release_firmware(fw); out: lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "3024 Firmware update done: %d.", rc); + "3024 Firmware update done: %d.\n", rc); return; } /** + * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to perform Linux generic firmware upgrade on device + * that supports such feature. + **/ +int +lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade) +{ + uint8_t file_name[ELX_MODEL_NAME_SIZE]; + int ret; + const struct firmware *fw; + + /* Only supported on SLI4 interface type 2 for now */ + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + return -EPERM; + + snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp", phba->ModelName); + + if (fw_upgrade == INT_FW_UPGRADE) { + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, + file_name, &phba->pcidev->dev, + GFP_KERNEL, (void *)phba, + lpfc_write_firmware); + } else if (fw_upgrade == RUN_FW_UPGRADE) { + ret = request_firmware(&fw, file_name, &phba->pcidev->dev); + if (!ret) + lpfc_write_firmware(fw, (void *)phba); + } else { + ret = -EINVAL; + } + + return ret; +} + +/** * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier @@ -9560,7 +9597,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) uint32_t cfg_mode, intr_mode; int mcnt; int adjusted_fcp_io_channel; - uint8_t file_name[ELX_MODEL_NAME_SIZE]; /* Allocate memory for HBA structure */ phba = lpfc_hba_alloc(pdev); @@ -9703,16 +9739,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Perform post initialization setup */ lpfc_post_init_setup(phba); - /* check for firmware upgrade or downgrade (if_type 2 only) */ - if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == - LPFC_SLI_INTF_IF_TYPE_2) { - snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp", - phba->ModelName); - ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - file_name, &phba->pcidev->dev, - GFP_KERNEL, (void *)phba, - lpfc_write_firmware); - } + /* check for firmware upgrade or downgrade */ + if (phba->cfg_request_firmware_upgrade) + ret = lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE); /* Check if there are static vports to be created. */ lpfc_create_static_vport(phba); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 7f45ac9..60e5a17 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -3227,6 +3227,21 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, } } + switch (scsi_get_prot_op(scsi_cmnd)) { + case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_READ_STRIP: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP; + break; + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_INSERT: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT; + break; + case SCSI_PROT_WRITE_PASS: + case SCSI_PROT_READ_PASS: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS; + break; + } + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); @@ -3236,7 +3251,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, * we need to set word 4 of IOCB here */ iocb_cmd->un.fcpi.fcpi_parm = fcpdl; - lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF; return 0; err: @@ -4914,6 +4928,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { if (!NLP_CHK_NODE_ACT(ndlp)) continue; + if (vport->phba->cfg_fcp2_no_tgt_reset && + (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE)) + continue; if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && ndlp->nlp_sid == i && ndlp->rport) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index d7f3313..624eab3 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -8068,10 +8068,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, LPFC_WQE_LENLOC_WORD4); bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0); bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU); - if (iocbq->iocb_flag & LPFC_IO_DIF) { - iocbq->iocb_flag &= ~LPFC_IO_DIF; - bf_set(wqe_dif, &wqe->generic.wqe_com, 1); - } bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1); break; case CMD_FCP_IREAD64_CR: @@ -8091,10 +8087,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, LPFC_WQE_LENLOC_WORD4); bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0); bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU); - if (iocbq->iocb_flag & LPFC_IO_DIF) { - iocbq->iocb_flag &= ~LPFC_IO_DIF; - bf_set(wqe_dif, &wqe->generic.wqe_com, 1); - } bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1); break; case CMD_FCP_ICMND64_CR: @@ -8304,6 +8296,14 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, break; } + if (iocbq->iocb_flag & LPFC_IO_DIF_PASS) + bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_PASSTHRU); + else if (iocbq->iocb_flag & LPFC_IO_DIF_STRIP) + bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_STRIP); + else if (iocbq->iocb_flag & LPFC_IO_DIF_INSERT) + bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_INSERT); + iocbq->iocb_flag &= ~(LPFC_IO_DIF_PASS | LPFC_IO_DIF_STRIP | + LPFC_IO_DIF_INSERT); bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag); bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag); wqe->generic.wqe_com.abort_tag = abort_tag; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 2f48d00..9d2e0c6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -69,7 +69,9 @@ struct lpfc_iocbq { #define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */ #define DSS_SECURITY_OP 0x100 /* security IO */ #define LPFC_IO_ON_TXCMPLQ 0x200 /* The IO is still on the TXCMPLQ */ -#define LPFC_IO_DIF 0x400 /* T10 DIF IO */ +#define LPFC_IO_DIF_PASS 0x400 /* T10 DIF IO pass-thru prot */ +#define LPFC_IO_DIF_STRIP 0x800 /* T10 DIF IO strip prot */ +#define LPFC_IO_DIF_INSERT 0x1000 /* T10 DIF IO insert prot */ #define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */ #define LPFC_FIP_ELS_ID_SHIFT 14 diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index f44a06a..44c427a 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -82,6 +82,9 @@ #define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000 +#define INT_FW_UPGRADE 0 +#define RUN_FW_UPGRADE 1 + enum lpfc_sli4_queue_type { LPFC_EQ, LPFC_GCQ, diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 0c21491..ba596e8 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.35" +#define LPFC_DRIVER_VERSION "8.3.36" #define LPFC_DRIVER_NAME "lpfc" /* Used for SLI 2/3 */ diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig new file mode 100644 index 0000000..81471bf --- /dev/null +++ b/drivers/scsi/mpt3sas/Kconfig @@ -0,0 +1,67 @@ +# +# Kernel configuration file for the MPT3SAS +# +# This code is based on drivers/scsi/mpt3sas/Kconfig +# Copyright (C) 2012 LSI Corporation +# (mailto:DL-MPTFusionLinux@lsi.com) + +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# NO WARRANTY +# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +# solely responsible for determining the appropriateness of using and +# distributing the Program and assumes all risks associated with its +# exercise of rights under this Agreement, including but not limited to +# the risks and costs of program errors, damage to or loss of data, +# programs or equipment, and unavailability or interruption of operations. + +# DISCLAIMER OF LIABILITY +# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. + +config SCSI_MPT3SAS + tristate "LSI MPT Fusion SAS 3.0 Device Driver" + depends on PCI && SCSI + select SCSI_SAS_ATTRS + select RAID_ATTRS + ---help--- + This driver supports PCI-Express SAS 12Gb/s Host Adapters. + +config SCSI_MPT3SAS_MAX_SGE + int "LSI MPT Fusion Max number of SG Entries (16 - 256)" + depends on PCI && SCSI && SCSI_MPT3SAS + default "128" + range 16 256 + ---help--- + This option allows you to specify the maximum number of scatter- + gather entries per I/O. The driver default is 128, which matches + MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this + can be 256. However, it may decreased down to 16. Decreasing this + parameter will reduce memory requirements on a per controller instance. + +config SCSI_MPT3SAS_LOGGING + bool "LSI MPT Fusion logging facility" + depends on PCI && SCSI && SCSI_MPT3SAS + ---help--- + This turns on a logging facility. diff --git a/drivers/scsi/mpt3sas/Makefile b/drivers/scsi/mpt3sas/Makefile new file mode 100644 index 0000000..4c1d2e7 --- /dev/null +++ b/drivers/scsi/mpt3sas/Makefile @@ -0,0 +1,8 @@ +# mpt3sas makefile +obj-m += mpt3sas.o +mpt3sas-y += mpt3sas_base.o \ + mpt3sas_config.o \ + mpt3sas_scsih.o \ + mpt3sas_transport.o \ + mpt3sas_ctl.o \ + mpt3sas_trigger_diag.o diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h new file mode 100644 index 0000000..03317ff --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -0,0 +1,1164 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2.h + * Title: MPI Message independent structures and definitions + * including System Interface Register Set and + * scatter/gather formats. + * Creation Date: June 21, 2006 + * + * mpi2.h Version: 02.00.26 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. + * In all request and reply descriptors, replaced VF_ID + * field with MSIxIndex field. + * Removed DevHandle field from + * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those + * bytes reserved. + * Added RAID Accelerator functionality. + * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MSI-x index mask and shift for Reply Post Host + * Index register. + * Added function code for Host Based Discovery Action. + * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. + * Added defines for product-specific range of message + * function codes, 0xF0 to 0xFF. + * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. + * Added alternative defines for the SGE Direction bit. + * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. + * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. + * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. + * Incorporating additions for MPI v2.5. + * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. + * Added Hard Reset delay timings. + * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_H +#define MPI2_H + +/***************************************************************************** +* +* MPI Version Definitions +* +*****************************************************************************/ + +#define MPI2_VERSION_MAJOR_MASK (0xFF00) +#define MPI2_VERSION_MAJOR_SHIFT (8) +#define MPI2_VERSION_MINOR_MASK (0x00FF) +#define MPI2_VERSION_MINOR_SHIFT (0) + +/*major version for all MPI v2.x */ +#define MPI2_VERSION_MAJOR (0x02) + +/*minor version for MPI v2.0 compatible products */ +#define MPI2_VERSION_MINOR (0x00) +#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI2_VERSION_MINOR) +#define MPI2_VERSION_02_00 (0x0200) + +/*minor version for MPI v2.5 compatible products */ +#define MPI25_VERSION_MINOR (0x05) +#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI25_VERSION_MINOR) +#define MPI2_VERSION_02_05 (0x0205) + +/*Unit and Dev versioning for this MPI header set */ +#define MPI2_HEADER_VERSION_UNIT (0x1A) +#define MPI2_HEADER_VERSION_DEV (0x00) +#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI2_HEADER_VERSION_DEV_SHIFT (0) +#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \ + MPI2_HEADER_VERSION_DEV) + +/***************************************************************************** +* +* IOC State Definitions +* +*****************************************************************************/ + +#define MPI2_IOC_STATE_RESET (0x00000000) +#define MPI2_IOC_STATE_READY (0x10000000) +#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI2_IOC_STATE_FAULT (0x40000000) + +#define MPI2_IOC_STATE_MASK (0xF0000000) +#define MPI2_IOC_STATE_SHIFT (28) + +/*Fault state range for prodcut specific codes */ +#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) +#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) + +/***************************************************************************** +* +* System Interface Register Definitions +* +*****************************************************************************/ + +typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { + U32 Doorbell; /*0x00 */ + U32 WriteSequence; /*0x04 */ + U32 HostDiagnostic; /*0x08 */ + U32 Reserved1; /*0x0C */ + U32 DiagRWData; /*0x10 */ + U32 DiagRWAddressLow; /*0x14 */ + U32 DiagRWAddressHigh; /*0x18 */ + U32 Reserved2[5]; /*0x1C */ + U32 HostInterruptStatus; /*0x30 */ + U32 HostInterruptMask; /*0x34 */ + U32 DCRData; /*0x38 */ + U32 DCRAddress; /*0x3C */ + U32 Reserved3[2]; /*0x40 */ + U32 ReplyFreeHostIndex; /*0x48 */ + U32 Reserved4[8]; /*0x4C */ + U32 ReplyPostHostIndex; /*0x6C */ + U32 Reserved5; /*0x70 */ + U32 HCBSize; /*0x74 */ + U32 HCBAddressLow; /*0x78 */ + U32 HCBAddressHigh; /*0x7C */ + U32 Reserved6[16]; /*0x80 */ + U32 RequestDescriptorPostLow; /*0xC0 */ + U32 RequestDescriptorPostHigh; /*0xC4 */ + U32 Reserved7[14]; /*0xC8 */ +} MPI2_SYSTEM_INTERFACE_REGS, + *PTR_MPI2_SYSTEM_INTERFACE_REGS, + Mpi2SystemInterfaceRegs_t, + *pMpi2SystemInterfaceRegs_t; + +/* + *Defines for working with the Doorbell register. + */ +#define MPI2_DOORBELL_OFFSET (0x00000000) + +/*IOC --> System values */ +#define MPI2_DOORBELL_USED (0x08000000) +#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) +#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) + +/*System --> IOC values */ +#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI2_DOORBELL_FUNCTION_SHIFT (24) +#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) + +/* + *Defines for the WriteSequence register + */ +#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) +#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) +#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) +#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) +#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) +#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) +#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) + +/* + *Defines for the HostDiagnostic register + */ +#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) + +#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) + +#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) +#define MPI2_DIAG_HCB_MODE (0x00000100) +#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) +#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI2_DIAG_RESET_HISTORY (0x00000020) +#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) +#define MPI2_DIAG_RESET_ADAPTER (0x00000004) +#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) + +/* + *Offsets for DiagRWData and address + */ +#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) +#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) +#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) + +/* + *Defines for the HostInterruptStatus register + */ +#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) +#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS +#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) +#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) +#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) +#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS + +/* + *Defines for the HostInterruptMask register + */ +#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) +#define MPI2_HIM_REPLY_INT_MASK (0x00000008) +#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK +#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) +#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK + +/* + *Offsets for DCRData and address + */ +#define MPI2_DCR_DATA_OFFSET (0x00000038) +#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) + +/* + *Offset for the Reply Free Queue + */ +#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) + +/* + *Defines for the Reply Descriptor Post Queue + */ +#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) +#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF) +#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000) +#define MPI2_RPHI_MSIX_INDEX_SHIFT (24) + +/* + *Defines for the HCBSize and address + */ +#define MPI2_HCB_SIZE_OFFSET (0x00000074) +#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) + +#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) +#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) + +/* + *Offsets for the Request Queue + */ +#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) +#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) + +/*Hard Reset delay timings */ +#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000) +#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000) +#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000) + +/***************************************************************************** +* +* Message Descriptors +* +*****************************************************************************/ + +/*Request Descriptors */ + +/*Default Request Descriptor */ +typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 DescriptorTypeDependent; /*0x06 */ +} MPI2_DEFAULT_REQUEST_DESCRIPTOR, + *PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, + Mpi2DefaultRequestDescriptor_t, + *pMpi2DefaultRequestDescriptor_t; + +/*defines for the RequestFlags field */ +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) +#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) +#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) +#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) +#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C) + +#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) + +/*High Priority Request Descriptor */ +typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 Reserved1; /*0x06 */ +} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + *PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + Mpi2HighPriorityRequestDescriptor_t, + *pMpi2HighPriorityRequestDescriptor_t; + +/*SCSI IO Request Descriptor */ +typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 DevHandle; /*0x06 */ +} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + *PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi2SCSIIORequestDescriptor_t, + *pMpi2SCSIIORequestDescriptor_t; + +/*SCSI Target Request Descriptor */ +typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 IoIndex; /*0x06 */ +} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + *PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + Mpi2SCSITargetRequestDescriptor_t, + *pMpi2SCSITargetRequestDescriptor_t; + +/*RAID Accelerator Request Descriptor */ +typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR { + U8 RequestFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 LMID; /*0x04 */ + U16 Reserved; /*0x06 */ +} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + *PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + Mpi2RAIDAcceleratorRequestDescriptor_t, + *pMpi2RAIDAcceleratorRequestDescriptor_t; + +/*Fast Path SCSI IO Request Descriptor */ +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR + MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, + *PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi25FastPathSCSIIORequestDescriptor_t, + *pMpi25FastPathSCSIIORequestDescriptor_t; + +/*union of Request Descriptors */ +typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; + MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO; + U64 Words; +} MPI2_REQUEST_DESCRIPTOR_UNION, + *PTR_MPI2_REQUEST_DESCRIPTOR_UNION, + Mpi2RequestDescriptorUnion_t, + *pMpi2RequestDescriptorUnion_t; + +/*Reply Descriptors */ + +/*Default Reply Descriptor */ +typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 DescriptorTypeDependent1; /*0x02 */ + U32 DescriptorTypeDependent2; /*0x04 */ +} MPI2_DEFAULT_REPLY_DESCRIPTOR, + *PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, + Mpi2DefaultReplyDescriptor_t, + *pMpi2DefaultReplyDescriptor_t; + +/*defines for the ReplyFlags field */ +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) +#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) + +/*values for marking a reply descriptor as unused */ +#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) +#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) + +/*Address Reply Descriptor */ +typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U32 ReplyFrameAddress; /*0x04 */ +} MPI2_ADDRESS_REPLY_DESCRIPTOR, + *PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, + Mpi2AddressReplyDescriptor_t, + *pMpi2AddressReplyDescriptor_t; + +#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) + +/*SCSI IO Success Reply Descriptor */ +typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U16 TaskTag; /*0x04 */ + U16 Reserved1; /*0x06 */ +} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi2SCSIIOSuccessReplyDescriptor_t, + *pMpi2SCSIIOSuccessReplyDescriptor_t; + +/*TargetAssist Success Reply Descriptor */ +typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U8 SequenceNumber; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 IoIndex; /*0x06 */ +} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + Mpi2TargetAssistSuccessReplyDescriptor_t, + *pMpi2TargetAssistSuccessReplyDescriptor_t; + +/*Target Command Buffer Reply Descriptor */ +typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U8 VP_ID; /*0x02 */ + U8 Flags; /*0x03 */ + U16 InitiatorDevHandle; /*0x04 */ + U16 IoIndex; /*0x06 */ +} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + *PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi2TargetCommandBufferReplyDescriptor_t, + *pMpi2TargetCommandBufferReplyDescriptor_t; + +/*defines for Flags field */ +#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) + +/*RAID Accelerator Success Reply Descriptor */ +typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /*0x00 */ + U8 MSIxIndex; /*0x01 */ + U16 SMID; /*0x02 */ + U32 Reserved; /*0x04 */ +} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + Mpi2RAIDAcceleratorSuccessReplyDescriptor_t, + *pMpi2RAIDAcceleratorSuccessReplyDescriptor_t; + +/*Fast Path SCSI IO Success Reply Descriptor */ +typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR + MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi25FastPathSCSIIOSuccessReplyDescriptor_t, + *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t; + +/*union of Reply Descriptors */ +typedef union _MPI2_REPLY_DESCRIPTORS_UNION { + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; + MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess; + U64 Words; +} MPI2_REPLY_DESCRIPTORS_UNION, + *PTR_MPI2_REPLY_DESCRIPTORS_UNION, + Mpi2ReplyDescriptorsUnion_t, + *pMpi2ReplyDescriptorsUnion_t; + +/***************************************************************************** +* +* Message Functions +* +*****************************************************************************/ + +#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) +#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) +#define MPI2_FUNCTION_IOC_INIT (0x02) +#define MPI2_FUNCTION_IOC_FACTS (0x03) +#define MPI2_FUNCTION_CONFIG (0x04) +#define MPI2_FUNCTION_PORT_FACTS (0x05) +#define MPI2_FUNCTION_PORT_ENABLE (0x06) +#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) +#define MPI2_FUNCTION_EVENT_ACK (0x08) +#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) +#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) +#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) +#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) +#define MPI2_FUNCTION_FW_UPLOAD (0x12) +#define MPI2_FUNCTION_RAID_ACTION (0x15) +#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) +#define MPI2_FUNCTION_TOOLBOX (0x17) +#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) +#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) +#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) +#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) +#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) +#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) +#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) +#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) +#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) +#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) +#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) +#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) + +/*Doorbell functions */ +#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +#define MPI2_FUNCTION_HANDSHAKE (0x42) + +/***************************************************************************** +* +* IOC Status Values +* +*****************************************************************************/ + +/*mask for IOCStatus status value */ +#define MPI2_IOCSTATUS_MASK (0x7FFF) + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + +#define MPI2_IOCSTATUS_SUCCESS (0x0000) +#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI2_IOCSTATUS_BUSY (0x0002) +#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) +#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + +#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + +#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + +#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + +#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + +#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + +#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + +/**************************************************************************** +* RAID Accelerator values +****************************************************************************/ + +#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0) + +/**************************************************************************** +* IOCStatus flag to indicate that log info is available +****************************************************************************/ + +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) + +/**************************************************************************** +* IOCLogInfo Types +****************************************************************************/ + +#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI2_IOCLOGINFO_TYPE_FC (0x2) +#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + +/***************************************************************************** +* +* Standard Message Structures +* +*****************************************************************************/ + +/**************************************************************************** +*Request Message Header for all request messages +****************************************************************************/ + +typedef struct _MPI2_REQUEST_HEADER { + U16 FunctionDependent1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 FunctionDependent2; /*0x04 */ + U8 FunctionDependent3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ +} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER, + MPI2RequestHeader_t, *pMPI2RequestHeader_t; + +/**************************************************************************** +* Default Reply +****************************************************************************/ + +typedef struct _MPI2_DEFAULT_REPLY { + U16 FunctionDependent1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 FunctionDependent2; /*0x04 */ + U8 FunctionDependent3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 FunctionDependent5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY, + MPI2DefaultReply_t, *pMPI2DefaultReply_t; + +/*common version structure/union used in messages and configuration pages */ + +typedef struct _MPI2_VERSION_STRUCT { + U8 Dev; /*0x00 */ + U8 Unit; /*0x01 */ + U8 Minor; /*0x02 */ + U8 Major; /*0x03 */ +} MPI2_VERSION_STRUCT; + +typedef union _MPI2_VERSION_UNION { + MPI2_VERSION_STRUCT Struct; + U32 Word; +} MPI2_VERSION_UNION; + +/*LUN field defines, common to many structures */ +#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_LEVEL_1_WORD (0xFF00) +#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) + +/***************************************************************************** +* +* Fusion-MPT MPI Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* MPI Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_SIMPLE32 { + U32 FlagsLength; + U32 Address; +} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32, + Mpi2SGESimple32_t, *pMpi2SGESimple32_t; + +typedef struct _MPI2_SGE_SIMPLE64 { + U32 FlagsLength; + U64 Address; +} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64, + Mpi2SGESimple64_t, *pMpi2SGESimple64_t; + +typedef struct _MPI2_SGE_SIMPLE_UNION { + U32 FlagsLength; + union { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_SIMPLE_UNION, + *PTR_MPI2_SGE_SIMPLE_UNION, + Mpi2SGESimpleUnion_t, + *pMpi2SGESimpleUnion_t; + +/**************************************************************************** +* MPI Chain Element structures - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_CHAIN32 { + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32, + Mpi2SGEChain32_t, *pMpi2SGEChain32_t; + +typedef struct _MPI2_SGE_CHAIN64 { + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64, + Mpi2SGEChain64_t, *pMpi2SGEChain64_t; + +typedef struct _MPI2_SGE_CHAIN_UNION { + U16 Length; + U8 NextChainOffset; + U8 Flags; + union { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_CHAIN_UNION, + *PTR_MPI2_SGE_CHAIN_UNION, + Mpi2SGEChainUnion_t, + *pMpi2SGEChainUnion_t; + +/**************************************************************************** +* MPI Transaction Context Element structures - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANSACTION32 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION32, + *PTR_MPI2_SGE_TRANSACTION32, + Mpi2SGETransaction32_t, + *pMpi2SGETransaction32_t; + +typedef struct _MPI2_SGE_TRANSACTION64 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION64, + *PTR_MPI2_SGE_TRANSACTION64, + Mpi2SGETransaction64_t, + *pMpi2SGETransaction64_t; + +typedef struct _MPI2_SGE_TRANSACTION96 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96, + Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t; + +typedef struct _MPI2_SGE_TRANSACTION128 { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128, + Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128; + +typedef struct _MPI2_SGE_TRANSACTION_UNION { + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + } u; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION_UNION, + *PTR_MPI2_SGE_TRANSACTION_UNION, + Mpi2SGETransactionUnion_t, + *pMpi2SGETransactionUnion_t; + +/**************************************************************************** +* MPI SGE union for IO SGL's - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_IO_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + } u; +} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION, + Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t; + +/**************************************************************************** +* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_SGE_TRANS_SIMPLE_UNION, + *PTR_MPI2_SGE_TRANS_SIMPLE_UNION, + Mpi2SGETransSimpleUnion_t, + *pMpi2SGETransSimpleUnion_t; + +/**************************************************************************** +* All MPI SGE types union +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_UNION { + union { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION, + Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t; + +/**************************************************************************** +* MPI SGE field definition and masks +****************************************************************************/ + +/*Flags field bit definitions */ + +#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI2_SGE_FLAGS_DIRECTION (0x04) +#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI2_SGE_FLAGS_SHIFT (24) + +#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/*Element Type */ + +#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) + +/*Address location */ + +#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/*Direction */ + +#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) + +#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST) +#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC) + +/*Address Size */ + +#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/*Context Size */ + +#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) + +/**************************************************************************** +* MPI SGE operation Macros +****************************************************************************/ + +/*SIMPLE FlagsLength manipulations... */ +#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \ + MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) +#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) + +#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \ + MPI2_SGE_LENGTH(l)) + +#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ + MPI2_SGE_SET_FLAGS_LENGTH(f, l)) + +/*CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ + MPI2_SGE_SET_FLAGS(f)) +#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ + MPI2_SGE_LENGTH(l)) + +#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \ + MPI2_SGE_CHAIN_OFFSET_SHIFT) + +/***************************************************************************** +* +* Fusion-MPT IEEE Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* IEEE Simple Element structures +****************************************************************************/ + +/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */ +typedef struct _MPI2_IEEE_SGE_SIMPLE32 { + U32 Address; + U32 FlagsLength; +} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32, + Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t; + +typedef struct _MPI2_IEEE_SGE_SIMPLE64 { + U64 Address; + U32 Length; + U16 Reserved1; + U8 Reserved2; + U8 Flags; +} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64, + Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t; + +typedef union _MPI2_IEEE_SGE_SIMPLE_UNION { + MPI2_IEEE_SGE_SIMPLE32 Simple32; + MPI2_IEEE_SGE_SIMPLE64 Simple64; +} MPI2_IEEE_SGE_SIMPLE_UNION, + *PTR_MPI2_IEEE_SGE_SIMPLE_UNION, + Mpi2IeeeSgeSimpleUnion_t, + *pMpi2IeeeSgeSimpleUnion_t; + +/**************************************************************************** +* IEEE Chain Element structures +****************************************************************************/ + +/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */ +typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; + +/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */ +typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; + +typedef union _MPI2_IEEE_SGE_CHAIN_UNION { + MPI2_IEEE_SGE_CHAIN32 Chain32; + MPI2_IEEE_SGE_CHAIN64 Chain64; +} MPI2_IEEE_SGE_CHAIN_UNION, + *PTR_MPI2_IEEE_SGE_CHAIN_UNION, + Mpi2IeeeSgeChainUnion_t, + *pMpi2IeeeSgeChainUnion_t; + +/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 products only */ +typedef struct _MPI25_IEEE_SGE_CHAIN64 { + U64 Address; + U32 Length; + U16 Reserved1; + U8 NextChainOffset; + U8 Flags; +} MPI25_IEEE_SGE_CHAIN64, + *PTR_MPI25_IEEE_SGE_CHAIN64, + Mpi25IeeeSgeChain64_t, + *pMpi25IeeeSgeChain64_t; + +/**************************************************************************** +* All IEEE SGE types union +****************************************************************************/ + +/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */ +typedef struct _MPI2_IEEE_SGE_UNION { + union { + MPI2_IEEE_SGE_SIMPLE_UNION Simple; + MPI2_IEEE_SGE_CHAIN_UNION Chain; + } u; +} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION, + Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t; + +/**************************************************************************** +* IEEE SGE union for IO SGL's +****************************************************************************/ + +typedef union _MPI25_SGE_IO_UNION { + MPI2_IEEE_SGE_SIMPLE64 IeeeSimple; + MPI25_IEEE_SGE_CHAIN64 IeeeChain; +} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION, + Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t; + +/**************************************************************************** +* IEEE SGE field definitions and masks +****************************************************************************/ + +/*Flags field bit definitions */ + +#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) +#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40) + +#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) + +#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) + +/*Element Type */ + +#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) +#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) + +/*Data Location Address Space */ + +#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) +#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) +#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) +#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \ + (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) + +/**************************************************************************** +* IEEE SGE operation Macros +****************************************************************************/ + +/*SIMPLE FlagsLength manipulations... */ +#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \ + >> MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) + +#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\ + MPI2_IEEE32_SGE_LENGTH(l)) + +#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \ + MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \ + MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ + MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l)) + +/*CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ + MPI2_IEEE32_SGE_SET_FLAGS(f)) +#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ + MPI2_IEEE32_SGE_LENGTH(l)) + +/***************************************************************************** +* +* Fusion-MPT MPI/IEEE Scatter Gather Unions +* +*****************************************************************************/ + +typedef union _MPI2_SIMPLE_SGE_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; +} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION, + Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t; + +typedef union _MPI2_SGE_IO_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_SGE_CHAIN_UNION MpiChain; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; +} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION, + Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t; + +/**************************************************************************** +* +* Values for SGLFlags field, used in many request messages with an SGL +* +****************************************************************************/ + +/*values for MPI SGL Data Location Address Space subfield */ +#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) +#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) +#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +/*values for SGL Type subfield */ +#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) +#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h new file mode 100644 index 0000000..d8b2c3e --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -0,0 +1,3323 @@ +/* + * Copyright (c) 2000-2011 LSI Corporation. + * + * + * Name: mpi2_cnfg.h + * Title: MPI Configuration messages and pages + * Creation Date: November 10, 2006 + * + * mpi2_cnfg.h Version: 02.00.22 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. + * 07-30-09 02.00.12 Added IO Unit Page 7. + * Added new device ids. + * Added SAS IO Unit Page 5. + * Added partial and slumber power management capable flags + * to SAS Device Page 0 Flags field. + * Added PhyInfo defines for power condition. + * Added Ethernet configuration pages. + * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. + * Added SAS PHY Page 4 structure and defines. + * 02-10-10 02.00.14 Modified the comments for the configuration page + * structures that contain an array of data. The host + * should use the "count" field in the page data (e.g. the + * NumPhys field) to determine the number of valid elements + * in the array. + * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. + * Added PowerManagementCapabilities to IO Unit Page 7. + * Added PortWidthModGroup field to + * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. + * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT + * define. + * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. + * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. + * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) + * defines. + * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to + * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for + * the Pinout field. + * Added BoardTemperature and BoardTemperatureUnits fields + * to MPI2_CONFIG_PAGE_IO_UNIT_7. + * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define + * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. + * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. + * Added IO Unit Page 8, IO Unit Page 9, + * and IO Unit Page 10. + * Added SASNotifyPrimitiveMasks field to + * MPI2_CONFIG_PAGE_IOC_7. + * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). + * 05-25-11 02.00.20 Cleaned up a few comments. + * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities + * for PCIe link as obsolete. + * Added SpinupFlags field containing a Disable Spin-up bit + * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO + * Unit Page 4. + * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. + * Added UEFIVersion field to BIOS Page 1 and defined new + * BiosOptions bits. + * Incorporating additions for MPI v2.5. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_CNFG_H +#define MPI2_CNFG_H + +/***************************************************************************** +* Configuration Page Header and defines +*****************************************************************************/ + +/*Config Page Header */ +typedef struct _MPI2_CONFIG_PAGE_HEADER { + U8 PageVersion; /*0x00 */ + U8 PageLength; /*0x01 */ + U8 PageNumber; /*0x02 */ + U8 PageType; /*0x03 */ +} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER, + Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t; + +typedef union _MPI2_CONFIG_PAGE_HEADER_UNION { + MPI2_CONFIG_PAGE_HEADER Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION, + Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion; + +/*Extended Config Page Header */ +typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER { + U8 PageVersion; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 PageNumber; /*0x02 */ + U8 PageType; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 Reserved2; /*0x07 */ +} MPI2_CONFIG_EXTENDED_PAGE_HEADER, + *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, + Mpi2ConfigExtendedPageHeader_t, + *pMpi2ConfigExtendedPageHeader_t; + +typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { + MPI2_CONFIG_PAGE_HEADER Struct; + MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; + U8 Bytes[8]; + U16 Word16[4]; + U32 Word32[2]; +} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + Mpi2ConfigPageExtendedHeaderUnion, + *pMpi2ConfigPageExtendedHeaderUnion; + + +/*PageType field values */ +#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI2_CONFIG_PAGETYPE_IOC (0x01) +#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) + + +/*ExtPageType field values */ +#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) +#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) +#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) +#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) + + +/***************************************************************************** +* PageAddress defines +*****************************************************************************/ + +/*RAID Volume PageAddress format */ +#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) + + +/*RAID Physical Disk PageAddress format */ +#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) +#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) +#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) +#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) + +#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) + + +/*SAS Expander PageAddress format */ +#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) + + +/*SAS Device PageAddress format */ +#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + + +/*SAS PHY PageAddress format */ +#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) + +#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) + + +/*SAS Port PageAddress format */ +#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) + +#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) + + +/*SAS Enclosure PageAddress format */ +#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + + +/*RAID Configuration PageAddress format */ +#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) +#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) +#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) + +#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) + + +/*Driver Persistent Mapping PageAddress format */ +#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) +#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) + +#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) +#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) +#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) + + +/*Ethernet PageAddress format */ +#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) +#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) + +#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) + + + +/**************************************************************************** +* Configuration messages +****************************************************************************/ + +/*Configuration Request Message */ +typedef struct _MPI2_CONFIG_REQUEST { + U8 Action; /*0x00 */ + U8 SGLFlags; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 ProxyVF_ID; /*0x0D */ + U16 Reserved4; /*0x0E */ + U32 Reserved3; /*0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ + U32 PageAddress; /*0x18 */ + MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */ +} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST, + Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t; + +/*values for the Action field */ +#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) +#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + + +/*Config Reply Message */ +typedef struct _MPI2_CONFIG_REPLY { + U8 Action; /*0x00 */ + U8 SGLFlags; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 ExtPageLength; /*0x04 */ + U8 ExtPageType; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 Reserved2; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */ +} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY, + Mpi2ConfigReply_t, *pMpi2ConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ + +#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) + +/*MPI v2.0 SAS products */ +#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) +#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) +#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) +#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) +#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) +#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) +#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) + +#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) + +#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) +#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) +#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) +#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) +#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) +#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) +#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) + +/*MPI v2.5 SAS products */ +#define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) +#define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097) +#define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090) +#define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091) +#define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) +#define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) + + + + +/*Manufacturing Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 ChipName[16]; /*0x04 */ + U8 ChipRevision[8]; /*0x14 */ + U8 BoardName[16]; /*0x1C */ + U8 BoardAssembly[16]; /*0x2C */ + U8 BoardTracerNumber[16]; /*0x3C */ +} MPI2_CONFIG_PAGE_MAN_0, + *PTR_MPI2_CONFIG_PAGE_MAN_0, + Mpi2ManufacturingPage0_t, + *pMpi2ManufacturingPage0_t; + +#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) + + +/*Manufacturing Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 VPD[256]; /*0x04 */ +} MPI2_CONFIG_PAGE_MAN_1, + *PTR_MPI2_CONFIG_PAGE_MAN_1, + Mpi2ManufacturingPage1_t, + *pMpi2ManufacturingPage1_t; + +#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI2_CHIP_REVISION_ID { + U16 DeviceID; /*0x00 */ + U8 PCIRevisionID; /*0x02 */ + U8 Reserved; /*0x03 */ +} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID, + Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t; + + +/*Manufacturing Page 2 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_2 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ + U32 + HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_2, + *PTR_MPI2_CONFIG_PAGE_MAN_2, + Mpi2ManufacturingPage2_t, + *pMpi2ManufacturingPage2_t; + +#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) + + +/*Manufacturing Page 3 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_3_INFO_WORDS +#define MPI2_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ + U32 + Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_3, + *PTR_MPI2_CONFIG_PAGE_MAN_3, + Mpi2ManufacturingPage3_t, + *pMpi2ManufacturingPage3_t; + +#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) + + +/*Manufacturing Page 4 */ + +typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS { + U8 PowerSaveFlags; /*0x00 */ + U8 InternalOperationsSleepTime; /*0x01 */ + U8 InternalOperationsRunTime; /*0x02 */ + U8 HostIdleTime; /*0x03 */ +} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + Mpi2ManPage4PwrSaveSettings_t, + *pMpi2ManPage4PwrSaveSettings_t; + +/*defines for the PowerSaveFlags field */ +#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) +#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) +#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) +#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) + +typedef struct _MPI2_CONFIG_PAGE_MAN_4 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Flags; /*0x08 */ + U8 InquirySize; /*0x0C */ + U8 Reserved2; /*0x0D */ + U16 Reserved3; /*0x0E */ + U8 InquiryData[56]; /*0x10 */ + U32 RAID0VolumeSettings; /*0x48 */ + U32 RAID1EVolumeSettings; /*0x4C */ + U32 RAID1VolumeSettings; /*0x50 */ + U32 RAID10VolumeSettings; /*0x54 */ + U32 Reserved4; /*0x58 */ + U32 Reserved5; /*0x5C */ + MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */ + U8 MaxOCEDisks; /*0x64 */ + U8 ResyncRate; /*0x65 */ + U16 DataScrubDuration; /*0x66 */ + U8 MaxHotSpares; /*0x68 */ + U8 MaxPhysDisksPerVol; /*0x69 */ + U8 MaxPhysDisks; /*0x6A */ + U8 MaxVolumes; /*0x6B */ +} MPI2_CONFIG_PAGE_MAN_4, + *PTR_MPI2_CONFIG_PAGE_MAN_4, + Mpi2ManufacturingPage4_t, + *pMpi2ManufacturingPage4_t; + +#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) + +/*Manufacturing Page 4 Flags field */ +#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) +#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) + +#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) +#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) +#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) + +#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) +#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) +#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) +#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) +#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) + +#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) +#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) +#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) +#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) + +#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) +#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) +#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) +#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) +#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) +#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) +#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) +#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) + + +/*Manufacturing Page 5 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES +#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_MANUFACTURING5_ENTRY { + U64 WWID; /*0x00 */ + U64 DeviceName; /*0x08 */ +} MPI2_MANUFACTURING5_ENTRY, + *PTR_MPI2_MANUFACTURING5_ENTRY, + Mpi2Manufacturing5Entry_t, + *pMpi2Manufacturing5Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_MAN_5 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + MPI2_MANUFACTURING5_ENTRY + Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */ +} MPI2_CONFIG_PAGE_MAN_5, + *PTR_MPI2_CONFIG_PAGE_MAN_5, + Mpi2ManufacturingPage5_t, + *pMpi2ManufacturingPage5_t; + +#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) + + +/*Manufacturing Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 ProductSpecificInfo;/*0x04 */ +} MPI2_CONFIG_PAGE_MAN_6, + *PTR_MPI2_CONFIG_PAGE_MAN_6, + Mpi2ManufacturingPage6_t, + *pMpi2ManufacturingPage6_t; + +#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) + + +/*Manufacturing Page 7 */ + +typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { + U32 Pinout; /*0x00 */ + U8 Connector[16]; /*0x04 */ + U8 Location; /*0x14 */ + U8 ReceptacleID; /*0x15 */ + U16 Slot; /*0x16 */ + U32 Reserved2; /*0x18 */ +} MPI2_MANPAGE7_CONNECTOR_INFO, + *PTR_MPI2_MANPAGE7_CONNECTOR_INFO, + Mpi2ManPage7ConnectorInfo_t, + *pMpi2ManPage7ConnectorInfo_t; + +/*defines for the Pinout field */ +#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) +#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) + +#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) +#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) +#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) +#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) +#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) +#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) +#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) +#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) +#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) + +/*defines for the Location field */ +#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Flags; /*0x0C */ + U8 EnclosureName[16]; /*0x10 */ + U8 NumPhys; /*0x20 */ + U8 Reserved3; /*0x21 */ + U16 Reserved4; /*0x22 */ + MPI2_MANPAGE7_CONNECTOR_INFO + ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */ +} MPI2_CONFIG_PAGE_MAN_7, + *PTR_MPI2_CONFIG_PAGE_MAN_7, + Mpi2ManufacturingPage7_t, + *pMpi2ManufacturingPage7_t; + +#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) + +/*defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + +/* + *Generic structure to use for product-specific manufacturing pages + *(currently Manufacturing Page 8 through Manufacturing Page 31). + */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_PS { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 ProductSpecificInfo;/*0x04 */ +} MPI2_CONFIG_PAGE_MAN_PS, + *PTR_MPI2_CONFIG_PAGE_MAN_PS, + Mpi2ManufacturingPagePS_t, + *pMpi2ManufacturingPagePS_t; + +#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +/*IO Unit Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U64 UniqueValue; /*0x04 */ + MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */ + MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */ +} MPI2_CONFIG_PAGE_IO_UNIT_0, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, + Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t; + +#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) + + +/*IO Unit Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Flags; /*0x04 */ +} MPI2_CONFIG_PAGE_IO_UNIT_1, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, + Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t; + +#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) + +/*IO Unit Page 1 Flags defines */ +#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) +#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) +#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) +#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) +#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) +#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) +#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) +#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) +#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) +#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) + + +/*IO Unit Page 3 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for GPIOCount at runtime. + */ +#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 GPIOCount; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U16 + GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */ +} MPI2_CONFIG_PAGE_IO_UNIT_3, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, + Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t; + +#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) + +/*defines for IO Unit Page 3 GPIOVal field */ +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) + + +/*IO Unit Page 5 */ + +/* + *Upper layer code (drivers, utilities, etc.) should leave this define set to + *one and check the value returned for NumDmaEngines at runtime. + */ +#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES +#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U64 + RaidAcceleratorBufferBaseAddress; /*0x04 */ + U64 + RaidAcceleratorBufferSize; /*0x0C */ + U64 + RaidAcceleratorControlBaseAddress; /*0x14 */ + U8 RAControlSize; /*0x1C */ + U8 NumDmaEngines; /*0x1D */ + U8 RAMinControlSize; /*0x1E */ + U8 RAMaxControlSize; /*0x1F */ + U32 Reserved1; /*0x20 */ + U32 Reserved2; /*0x24 */ + U32 Reserved3; /*0x28 */ + U32 + DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */ +} MPI2_CONFIG_PAGE_IO_UNIT_5, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, + Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t; + +#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) + +/*defines for IO Unit Page 5 DmaEngineCapabilities field */ +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) + +#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) +#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) +#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) +#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) + + +/*IO Unit Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 Flags; /*0x04 */ + U8 RAHostControlSize; /*0x06 */ + U8 Reserved0; /*0x07 */ + U64 + RaidAcceleratorHostControlBaseAddress; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ + U32 Reserved3; /*0x18 */ +} MPI2_CONFIG_PAGE_IO_UNIT_6, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, + Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t; + +#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) + +/*defines for IO Unit Page 6 Flags field */ +#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) + + +/*IO Unit Page 7 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 CurrentPowerMode; /*0x04 */ + U8 PreviousPowerMode; /*0x05 */ + U8 PCIeWidth; /*0x06 */ + U8 PCIeSpeed; /*0x07 */ + U32 ProcessorState; /*0x08 */ + U32 + PowerManagementCapabilities; /*0x0C */ + U16 IOCTemperature; /*0x10 */ + U8 + IOCTemperatureUnits; /*0x12 */ + U8 IOCSpeed; /*0x13 */ + U16 BoardTemperature; /*0x14 */ + U8 + BoardTemperatureUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ +} MPI2_CONFIG_PAGE_IO_UNIT_7, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, + Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t; + +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02) + +/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ +#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) +#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00) +#define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40) +#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80) +#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0) + +#define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07) +#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00) +#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01) +#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04) +#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05) +#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06) + + +/*defines for IO Unit Page 7 PCIeWidth field */ +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) + +/*defines for IO Unit Page 7 PCIeSpeed field */ +#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) + +/*defines for IO Unit Page 7 ProcessorState field */ +#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) +#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) + +#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) +#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) + +/*defines for IO Unit Page 7 PowerManagementCapabilities field */ +#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000) +#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000) +#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000) +#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000) +#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100) +#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040) +#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020) +#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008) +#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004) +#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002) +#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001) + +/*obsolete names for the PowerManagementCapabilities bits (above) */ +#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */ +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */ + + +/*defines for IO Unit Page 7 IOCTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) + +/*defines for IO Unit Page 7 IOCSpeed field */ +#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) +#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) +#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) +#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) + +/*defines for IO Unit Page 7 BoardTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) + + +/*IO Unit Page 8 */ + +#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) + +typedef struct _MPI2_IOUNIT8_SENSOR { + U16 Flags; /*0x00 */ + U16 Reserved1; /*0x02 */ + U16 + Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ +} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR, + Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t; + +/*defines for IO Unit Page 8 Sensor Flags field */ +#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U8 NumSensors; /*0x0C */ + U8 PollingInterval; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI2_IOUNIT8_SENSOR + Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_8, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, + Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t; + +#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) + + +/*IO Unit Page 9 */ + +typedef struct _MPI2_IOUNIT9_SENSOR { + U16 CurrentTemperature; /*0x00 */ + U16 Reserved1; /*0x02 */ + U8 Flags; /*0x04 */ + U8 Reserved2; /*0x05 */ + U16 Reserved3; /*0x06 */ + U32 Reserved4; /*0x08 */ + U32 Reserved5; /*0x0C */ +} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR, + Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t; + +/*defines for IO Unit Page 9 Sensor Flags field */ +#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U8 NumSensors; /*0x0C */ + U8 Reserved4; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI2_IOUNIT9_SENSOR + Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_9, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, + Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t; + +#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) + + +/*IO Unit Page 10 */ + +typedef struct _MPI2_IOUNIT10_FUNCTION { + U8 CreditPercent; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_IOUNIT10_FUNCTION, + *PTR_MPI2_IOUNIT10_FUNCTION, + Mpi2IOUnit10Function_t, + *pMpi2IOUnit10Function_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumFunctions at runtime. + */ +#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES +#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumFunctions; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + MPI2_IOUNIT10_FUNCTION + Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_10, + *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, + Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t; + +#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) + + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +/*IOC Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U16 VendorID; /*0x0C */ + U16 DeviceID; /*0x0E */ + U8 RevisionID; /*0x10 */ + U8 Reserved3; /*0x11 */ + U16 Reserved4; /*0x12 */ + U32 ClassCode; /*0x14 */ + U16 SubsystemVendorID; /*0x18 */ + U16 SubsystemID; /*0x1A */ +} MPI2_CONFIG_PAGE_IOC_0, + *PTR_MPI2_CONFIG_PAGE_IOC_0, + Mpi2IOCPage0_t, *pMpi2IOCPage0_t; + +#define MPI2_IOCPAGE0_PAGEVERSION (0x02) + + +/*IOC Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Flags; /*0x04 */ + U32 CoalescingTimeout; /*0x08 */ + U8 CoalescingDepth; /*0x0C */ + U8 PCISlotNum; /*0x0D */ + U8 PCIBusNum; /*0x0E */ + U8 PCIDomainSegment; /*0x0F */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_CONFIG_PAGE_IOC_1, + *PTR_MPI2_CONFIG_PAGE_IOC_1, + Mpi2IOCPage1_t, *pMpi2IOCPage1_t; + +#define MPI2_IOCPAGE1_PAGEVERSION (0x05) + +/*defines for IOC Page 1 Flags field */ +#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) + +/*IOC Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_6 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 + CapabilitiesFlags; /*0x04 */ + U8 MaxDrivesRAID0; /*0x08 */ + U8 MaxDrivesRAID1; /*0x09 */ + U8 + MaxDrivesRAID1E; /*0x0A */ + U8 + MaxDrivesRAID10; /*0x0B */ + U8 MinDrivesRAID0; /*0x0C */ + U8 MinDrivesRAID1; /*0x0D */ + U8 + MinDrivesRAID1E; /*0x0E */ + U8 + MinDrivesRAID10; /*0x0F */ + U32 Reserved1; /*0x10 */ + U8 + MaxGlobalHotSpares; /*0x14 */ + U8 MaxPhysDisks; /*0x15 */ + U8 MaxVolumes; /*0x16 */ + U8 MaxConfigs; /*0x17 */ + U8 MaxOCEDisks; /*0x18 */ + U8 Reserved2; /*0x19 */ + U16 Reserved3; /*0x1A */ + U32 + SupportedStripeSizeMapRAID0; /*0x1C */ + U32 + SupportedStripeSizeMapRAID1E; /*0x20 */ + U32 + SupportedStripeSizeMapRAID10; /*0x24 */ + U32 Reserved4; /*0x28 */ + U32 Reserved5; /*0x2C */ + U16 + DefaultMetadataSize; /*0x30 */ + U16 Reserved6; /*0x32 */ + U16 + MaxBadBlockTableEntries; /*0x34 */ + U16 Reserved7; /*0x36 */ + U32 + IRNvsramVersion; /*0x38 */ +} MPI2_CONFIG_PAGE_IOC_6, + *PTR_MPI2_CONFIG_PAGE_IOC_6, + Mpi2IOCPage6_t, *pMpi2IOCPage6_t; + +#define MPI2_IOCPAGE6_PAGEVERSION (0x05) + +/*defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) +#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + + +/*IOC Page 7 */ + +#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) + +typedef struct _MPI2_CONFIG_PAGE_IOC_7 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 + EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */ + U16 SASBroadcastPrimitiveMasks; /*0x18 */ + U16 SASNotifyPrimitiveMasks; /*0x1A */ + U32 Reserved3; /*0x1C */ +} MPI2_CONFIG_PAGE_IOC_7, + *PTR_MPI2_CONFIG_PAGE_IOC_7, + Mpi2IOCPage7_t, *pMpi2IOCPage7_t; + +#define MPI2_IOCPAGE7_PAGEVERSION (0x02) + + +/*IOC Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_8 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumDevsPerEnclosure; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U16 MaxPersistentEntries; /*0x08 */ + U16 MaxNumPhysicalMappedIDs; /*0x0A */ + U16 Flags; /*0x0C */ + U16 Reserved3; /*0x0E */ + U16 IRVolumeMappingFlags; /*0x10 */ + U16 Reserved4; /*0x12 */ + U32 Reserved5; /*0x14 */ +} MPI2_CONFIG_PAGE_IOC_8, + *PTR_MPI2_CONFIG_PAGE_IOC_8, + Mpi2IOCPage8_t, *pMpi2IOCPage8_t; + +#define MPI2_IOCPAGE8_PAGEVERSION (0x00) + +/*defines for IOC Page 8 Flags field */ +#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) +#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) + +#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) +#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) + +#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) +#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) + +/*defines for IOC Page 8 IRVolumeMappingFlags */ +#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) +#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) + + +/**************************************************************************** +* BIOS Config Pages +****************************************************************************/ + +/*BIOS Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 BiosOptions; /*0x04 */ + U32 IOCSettings; /*0x08 */ + U32 Reserved1; /*0x0C */ + U32 DeviceSettings; /*0x10 */ + U16 NumberOfDevices; /*0x14 */ + U16 UEFIVersion; /*0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /*0x18 */ + U16 IOTimeoutSequential; /*0x1A */ + U16 IOTimeoutOther; /*0x1C */ + U16 IOTimeoutBlockDevicesRM; /*0x1E */ +} MPI2_CONFIG_PAGE_BIOS_1, + *PTR_MPI2_CONFIG_PAGE_BIOS_1, + Mpi2BiosPage1_t, *pMpi2BiosPage1_t; + +#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) + +/*values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) +#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) +#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) + +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/*values for BIOS Page 1 IOCSettings field */ +#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/*values for BIOS Page 1 DeviceSettings field */ +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + +/*defines for BIOS Page 1 UEFIVersion field */ +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) + + + +/*BIOS Page 2 */ + +typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER { + U32 Reserved1; /*0x00 */ + U32 Reserved2; /*0x04 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ +} MPI2_BOOT_DEVICE_ADAPTER_ORDER, + *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, + Mpi2BootDeviceAdapterOrder_t, + *pMpi2BootDeviceAdapterOrder_t; + +typedef struct _MPI2_BOOT_DEVICE_SAS_WWID { + U64 SASAddress; /*0x00 */ + U8 LUN[8]; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_BOOT_DEVICE_SAS_WWID, + *PTR_MPI2_BOOT_DEVICE_SAS_WWID, + Mpi2BootDeviceSasWwid_t, + *pMpi2BootDeviceSasWwid_t; + +typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT { + U64 EnclosureLogicalID; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U16 SlotNumber; /*0x10 */ + U16 Reserved3; /*0x12 */ + U32 Reserved4; /*0x14 */ +} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + Mpi2BootDeviceEnclosureSlot_t, + *pMpi2BootDeviceEnclosureSlot_t; + +typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME { + U64 DeviceName; /*0x00 */ + U8 LUN[8]; /*0x08 */ + U32 Reserved1; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI2_BOOT_DEVICE_DEVICE_NAME, + *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, + Mpi2BootDeviceDeviceName_t, + *pMpi2BootDeviceDeviceName_t; + +typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE { + MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI2_BOOT_DEVICE_SAS_WWID SasWwid; + MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; + MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; +} MPI2_BIOSPAGE2_BOOT_DEVICE, + *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, + Mpi2BiosPage2BootDevice_t, + *pMpi2BiosPage2BootDevice_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_2 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Reserved3; /*0x0C */ + U32 Reserved4; /*0x10 */ + U32 Reserved5; /*0x14 */ + U32 Reserved6; /*0x18 */ + U8 ReqBootDeviceForm; /*0x1C */ + U8 Reserved7; /*0x1D */ + U16 Reserved8; /*0x1E */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */ + U8 ReqAltBootDeviceForm; /*0x38 */ + U8 Reserved9; /*0x39 */ + U16 Reserved10; /*0x3A */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */ + U8 CurrentBootDeviceForm; /*0x58 */ + U8 Reserved11; /*0x59 */ + U16 Reserved12; /*0x5A */ + MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */ +} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2, + Mpi2BiosPage2_t, *pMpi2BiosPage2_t; + +#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) + +/*values for BIOS Page 2 BootDeviceForm fields */ +#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) +#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) +#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) +#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) + + +/*BIOS Page 3 */ + +typedef struct _MPI2_ADAPTER_INFO { + U8 PciBusNumber; /*0x00 */ + U8 PciDeviceAndFunctionNumber; /*0x01 */ + U16 AdapterFlags; /*0x02 */ +} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO, + Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t; + +#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 GlobalFlags; /*0x04 */ + U32 BiosVersion; /*0x08 */ + MPI2_ADAPTER_INFO AdapterOrder[4]; /*0x0C */ + U32 Reserved1; /*0x1C */ +} MPI2_CONFIG_PAGE_BIOS_3, + *PTR_MPI2_CONFIG_PAGE_BIOS_3, + Mpi2BiosPage3_t, *pMpi2BiosPage3_t; + +#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) + +/*values for BIOS Page 3 GlobalFlags */ +#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) + +#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/*BIOS Page 4 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES +#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_BIOS4_ENTRY { + U64 ReassignmentWWID; /*0x00 */ + U64 ReassignmentDeviceName; /*0x08 */ +} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY, + Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_4 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + MPI2_BIOS4_ENTRY + Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */ +} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4, + Mpi2BiosPage4_t, *pMpi2BiosPage4_t; + +#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +/*RAID Volume Page 0 */ + +typedef struct _MPI2_RAIDVOL0_PHYS_DISK { + U8 RAIDSetNum; /*0x00 */ + U8 PhysDiskMap; /*0x01 */ + U8 PhysDiskNum; /*0x02 */ + U8 Reserved; /*0x03 */ +} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK, + Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t; + +/*defines for the PhysDiskMap field */ +#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAIDVOL0_SETTINGS { + U16 Settings; /*0x00 */ + U8 HotSparePool; /*0x01 */ + U8 Reserved; /*0x02 */ +} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS, + Mpi2RaidVol0Settings_t, + *pMpi2RaidVol0Settings_t; + +/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) + +/*RAID Volume Page 0 VolumeSettings defines */ +#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) +#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) + +#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) +#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) +#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) +#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhysDisks at runtime. + */ +#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U8 VolumeState; /*0x06 */ + U8 VolumeType; /*0x07 */ + U32 VolumeStatusFlags; /*0x08 */ + MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */ + U64 MaxLBA; /*0x10 */ + U32 StripeSize; /*0x18 */ + U16 BlockSize; /*0x1C */ + U16 Reserved1; /*0x1E */ + U8 SupportedPhysDisks;/*0x20 */ + U8 ResyncRate; /*0x21 */ + U16 DataScrubDuration; /*0x22 */ + U8 NumPhysDisks; /*0x24 */ + U8 Reserved2; /*0x25 */ + U8 Reserved3; /*0x26 */ + U8 InactiveStatus; /*0x27 */ + MPI2_RAIDVOL0_PHYS_DISK + PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */ +} MPI2_CONFIG_PAGE_RAID_VOL_0, + *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, + Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t; + +#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) + +/*values for RAID VolumeState */ +#define MPI2_RAID_VOL_STATE_MISSING (0x00) +#define MPI2_RAID_VOL_STATE_FAILED (0x01) +#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) +#define MPI2_RAID_VOL_STATE_ONLINE (0x03) +#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) +#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) + +/*values for RAID VolumeType */ +#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) +#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) +#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) +#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) +#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) + +/*values for RAID Volume Page 0 VolumeStatusFlags field */ +#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) +#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) +#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) +#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) +#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) +#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) +#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) +#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) + +/*values for RAID Volume Page 0 SupportedPhysDisks field */ +#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) +#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) +#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) +#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) + +/*values for RAID Volume Page 0 InactiveStatus field */ +#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +/*RAID Volume Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U16 Reserved0; /*0x06 */ + U8 GUID[24]; /*0x08 */ + U8 Name[16]; /*0x20 */ + U64 WWID; /*0x30 */ + U32 Reserved1; /*0x38 */ + U32 Reserved2; /*0x3C */ +} MPI2_CONFIG_PAGE_RAID_VOL_1, + *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, + Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t; + +#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +/*RAID Physical Disk Page 0 */ + +typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS { + U16 Reserved1; /*0x00 */ + U8 HotSparePool; /*0x02 */ + U8 Reserved2; /*0x03 */ +} MPI2_RAIDPHYSDISK0_SETTINGS, + *PTR_MPI2_RAIDPHYSDISK0_SETTINGS, + Mpi2RaidPhysDisk0Settings_t, + *pMpi2RaidPhysDisk0Settings_t; + +/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ + +typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA { + U8 VendorID[8]; /*0x00 */ + U8 ProductID[16]; /*0x08 */ + U8 ProductRevLevel[4]; /*0x18 */ + U8 SerialNum[32]; /*0x1C */ +} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + Mpi2RaidPhysDisk0InquiryData_t, + *pMpi2RaidPhysDisk0InquiryData_t; + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 PhysDiskNum; /*0x07 */ + MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */ + U32 Reserved2; /*0x0C */ + MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */ + U32 Reserved3; /*0x4C */ + U8 PhysDiskState; /*0x50 */ + U8 OfflineReason; /*0x51 */ + U8 IncompatibleReason; /*0x52 */ + U8 PhysDiskAttributes; /*0x53 */ + U32 PhysDiskStatusFlags;/*0x54 */ + U64 DeviceMaxLBA; /*0x58 */ + U64 HostMaxLBA; /*0x60 */ + U64 CoercedMaxLBA; /*0x68 */ + U16 BlockSize; /*0x70 */ + U16 Reserved5; /*0x72 */ + U32 Reserved6; /*0x74 */ +} MPI2_CONFIG_PAGE_RD_PDISK_0, + *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, + Mpi2RaidPhysDiskPage0_t, + *pMpi2RaidPhysDiskPage0_t; + +#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) + +/*PhysDiskState defines */ +#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) +#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) +#define MPI2_RAID_PD_STATE_OFFLINE (0x02) +#define MPI2_RAID_PD_STATE_ONLINE (0x03) +#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) +#define MPI2_RAID_PD_STATE_DEGRADED (0x05) +#define MPI2_RAID_PD_STATE_REBUILDING (0x06) +#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) + +/*OfflineReason defines */ +#define MPI2_PHYSDISK0_ONLINE (0x00) +#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) +#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) +#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) +#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) +#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) +#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) + +/*IncompatibleReason defines */ +#define MPI2_PHYSDISK0_COMPATIBLE (0x00) +#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) +#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) +#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) +#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) +#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) + +/*PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) +#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) +#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) + +#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) +#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) +#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) + +/*PhysDiskStatusFlags defines */ +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) +#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) +#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) +#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) +#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) +#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) + + +/*RAID Physical Disk Page 1 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhysDiskPaths at runtime. + */ +#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX +#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) +#endif + +typedef struct _MPI2_RAIDPHYSDISK1_PATH { + U16 DevHandle; /*0x00 */ + U16 Reserved1; /*0x02 */ + U64 WWID; /*0x04 */ + U64 OwnerWWID; /*0x0C */ + U8 OwnerIdentifier; /*0x14 */ + U8 Reserved2; /*0x15 */ + U16 Flags; /*0x16 */ +} MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH, + Mpi2RaidPhysDisk1Path_t, + *pMpi2RaidPhysDisk1Path_t; + +/*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ +#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) +#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U8 NumPhysDiskPaths; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 Reserved1; /*0x06 */ + U32 Reserved2; /*0x08 */ + MPI2_RAIDPHYSDISK1_PATH + PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */ +} MPI2_CONFIG_PAGE_RD_PDISK_1, + *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, + Mpi2RaidPhysDiskPage1_t, + *pMpi2RaidPhysDiskPage1_t; + +#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) + + +/**************************************************************************** +* values for fields used by several types of SAS Config Pages +****************************************************************************/ + +/*values for NegotiatedLinkRates fields */ +#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) +#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) +#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/*link rates used for Negotiated Physical and Logical Link Rate */ +#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) +#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) +#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) + + +/*values for AttachedPhyInfo fields */ +#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) + + +/*values for PhyInfo fields */ +#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) + +#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) +#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) + +#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) +#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) +#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) +#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) + +#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) + +#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) +#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) + + +/*values for SAS ProgrammedLinkRate fields */ +#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) +#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) + + +/*values for SAS HwLinkRate fields */ +#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) +#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +/*SAS IO Unit Page 0 */ + +typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA { + U8 Port; /*0x00 */ + U8 PortFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 NegotiatedLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo;/*0x04 */ + U16 AttachedDevHandle; /*0x08 */ + U16 ControllerDevHandle; /*0x0A */ + U32 DiscoveryStatus; /*0x0C */ + U32 Reserved; /*0x10 */ +} MPI2_SAS_IO_UNIT0_PHY_DATA, + *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, + Mpi2SasIOUnit0PhyData_t, + *pMpi2SasIOUnit0PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT0_PHY_MAX +#define MPI2_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1;/*0x08 */ + U8 NumPhys; /*0x0C */ + U8 Reserved2;/*0x0D */ + U16 Reserved3;/*0x0E */ + MPI2_SAS_IO_UNIT0_PHY_DATA + PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_0, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, + Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t; + +#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) + +/*values for SAS IO Unit Page 0 PortFlags */ +#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/*values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) +#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*see mpi2_sas.h for values for + *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + +/*values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) + + +/*SAS IO Unit Page 1 */ + +typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA { + U8 Port; /*0x00 */ + U8 PortFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 MaxMinLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo; /*0x04 */ + U16 MaxTargetPortConnectTime; /*0x08 */ + U16 Reserved1; /*0x0A */ +} MPI2_SAS_IO_UNIT1_PHY_DATA, + *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, + Mpi2SasIOUnit1PhyData_t, + *pMpi2SasIOUnit1PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT1_PHY_MAX +#define MPI2_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 + ControlFlags; /*0x08 */ + U16 + SASNarrowMaxQueueDepth; /*0x0A */ + U16 + AdditionalControlFlags; /*0x0C */ + U16 + SASWideMaxQueueDepth; /*0x0E */ + U8 + NumPhys; /*0x10 */ + U8 + SATAMaxQDepth; /*0x11 */ + U8 + ReportDeviceMissingDelay; /*0x12 */ + U8 + IODeviceMissingDelay; /*0x13 */ + MPI2_SAS_IO_UNIT1_PHY_DATA + PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_1, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, + Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t; + +#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) + +/*values for SAS IO Unit Page 1 ControlFlags */ +#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) + +#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) + +#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/*values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + +/*values for SAS IO Unit Page 1 PortFlags */ +#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/*values for SAS IO Unit Page 1 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) +#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/*values for SAS IO Unit Page 1 MaxMinLinkRate */ +#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) +#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) +#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) +#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) + +/*see mpi2_sas.h for values for + *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +/*SAS IO Unit Page 4 */ + +typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { + U8 MaxTargetSpinup; /*0x00 */ + U8 SpinupDelay; /*0x01 */ + U8 SpinupFlags; /*0x02 */ + U8 Reserved1; /*0x03 */ +} MPI2_SAS_IOUNIT4_SPINUP_GROUP, + *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, + Mpi2SasIOUnit4SpinupGroup_t, + *pMpi2SasIOUnit4SpinupGroup_t; +/*defines for SAS IO Unit Page 4 SpinupFlags */ +#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT4_PHY_MAX +#define MPI2_SAS_IOUNIT4_PHY_MAX (4) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */ + MPI2_SAS_IOUNIT4_SPINUP_GROUP + SpinupGroupParameters[4]; /*0x08 */ + U32 + Reserved1; /*0x18 */ + U32 + Reserved2; /*0x1C */ + U32 + Reserved3; /*0x20 */ + U8 + BootDeviceWaitTime; /*0x24 */ + U8 + Reserved4; /*0x25 */ + U16 + Reserved5; /*0x26 */ + U8 + NumPhys; /*0x28 */ + U8 + PEInitialSpinupDelay; /*0x29 */ + U8 + PEReplyDelay; /*0x2A */ + U8 + Flags; /*0x2B */ + U8 + PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */ +} MPI2_CONFIG_PAGE_SASIOUNIT_4, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, + Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t; + +#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) + +/*defines for Flags field */ +#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) + +/*defines for PHY field */ +#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) + + +/*SAS IO Unit Page 5 */ + +typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { + U8 ControlFlags; /*0x00 */ + U8 PortWidthModGroup; /*0x01 */ + U16 InactivityTimerExponent; /*0x02 */ + U8 SATAPartialTimeout; /*0x04 */ + U8 Reserved2; /*0x05 */ + U8 SATASlumberTimeout; /*0x06 */ + U8 Reserved3; /*0x07 */ + U8 SASPartialTimeout; /*0x08 */ + U8 Reserved4; /*0x09 */ + U8 SASSlumberTimeout; /*0x0A */ + U8 Reserved5; /*0x0B */ +} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + Mpi2SasIOUnit5PhyPmSettings_t, + *pMpi2SasIOUnit5PhyPmSettings_t; + +/*defines for ControlFlags field */ +#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) +#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) +#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) +#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) + +/*defines for PortWidthModeGroup field */ +#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) + +/*defines for InactivityTimerExponent field */ +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) + +#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) +#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) +#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) +#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) +#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) +#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT5_PHY_MAX +#define MPI2_SAS_IOUNIT5_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumPhys; /*0x08 */ + U8 Reserved1;/*0x09 */ + U16 Reserved2;/*0x0A */ + U32 Reserved3;/*0x0C */ + MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS + SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_5, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, + Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t; + +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) + + +/*SAS IO Unit Page 6 */ + +typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { + U8 CurrentStatus; /*0x00 */ + U8 CurrentModulation; /*0x01 */ + U8 CurrentUtilization; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 Reserved2; /*0x04 */ +} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + Mpi2SasIOUnit6PortWidthModGroupStatus_t, + *pMpi2SasIOUnit6PortWidthModGroupStatus_t; + +/*defines for CurrentStatus field */ +#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) +#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) +#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) +#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) +#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) +#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) + +/*defines for CurrentModulation field */ +#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) +#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) +#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) +#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX +#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U8 NumGroups; /*0x10 */ + U8 Reserved3; /*0x11 */ + U16 Reserved4; /*0x12 */ + MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS + PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_6, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, + Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t; + +#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) + + +/*SAS IO Unit Page 7 */ + +typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { + U8 Flags; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 Threshold75Pct; /*0x04 */ + U8 Threshold50Pct; /*0x05 */ + U8 Threshold25Pct; /*0x06 */ + U8 Reserved3; /*0x07 */ +} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + Mpi2SasIOUnit7PortWidthModGroupSettings_t, + *pMpi2SasIOUnit7PortWidthModGroupSettings_t; + +/*defines for Flags field */ +#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX +#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 SamplingInterval; /*0x08 */ + U8 WindowLength; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U8 NumGroups; /*0x14 */ + U8 Reserved4; /*0x15 */ + U16 Reserved5; /*0x16 */ + MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS + PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_7, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, + Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t; + +#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) + + +/*SAS IO Unit Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U32 + PowerManagementCapabilities; /*0x0C */ + U8 + TxRxSleepStatus; /*0x10 */ + U8 + Reserved2; /*0x11 */ + U16 + Reserved3; /*0x12 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_8, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, + Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t; + +#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) + +/*defines for PowerManagementCapabilities field */ +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) + +/*defines for TxRxSleepStatus field */ +#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00) +#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01) +#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02) +#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03) + + + +/*SAS IO Unit Page 16 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U64 + TimeStamp; /*0x08 */ + U32 + Reserved1; /*0x10 */ + U32 + Reserved2; /*0x14 */ + U32 + FastPathPendedRequests; /*0x18 */ + U32 + FastPathUnPendedRequests; /*0x1C */ + U32 + FastPathHostRequestStarts; /*0x20 */ + U32 + FastPathFirmwareRequestStarts; /*0x24 */ + U32 + FastPathHostCompletions; /*0x28 */ + U32 + FastPathFirmwareCompletions; /*0x2C */ + U32 + NonFastPathRequestStarts; /*0x30 */ + U32 + NonFastPathHostCompletions; /*0x30 */ +} MPI2_CONFIG_PAGE_SASIOUNIT16, + *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, + Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t; + +#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) + + +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + +/*SAS Expander Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PhysicalPort; /*0x08 */ + U8 + ReportGenLength; /*0x09 */ + U16 + EnclosureHandle; /*0x0A */ + U64 + SASAddress; /*0x0C */ + U32 + DiscoveryStatus; /*0x14 */ + U16 + DevHandle; /*0x18 */ + U16 + ParentDevHandle; /*0x1A */ + U16 + ExpanderChangeCount; /*0x1C */ + U16 + ExpanderRouteIndexes; /*0x1E */ + U8 + NumPhys; /*0x20 */ + U8 + SASLevel; /*0x21 */ + U16 + Flags; /*0x22 */ + U16 + STPBusInactivityTimeLimit; /*0x24 */ + U16 + STPMaxConnectTimeLimit; /*0x26 */ + U16 + STP_SMP_NexusLossTime; /*0x28 */ + U16 + MaxNumRoutedSasAddresses; /*0x2A */ + U64 + ActiveZoneManagerSASAddress;/*0x2C */ + U16 + ZoneLockInactivityLimit; /*0x34 */ + U16 + Reserved1; /*0x36 */ + U8 + TimeToReducedFunc; /*0x38 */ + U8 + InitialTimeToReducedFunc; /*0x39 */ + U8 + MaxReducedFuncTime; /*0x3A */ + U8 + Reserved2; /*0x3B */ +} MPI2_CONFIG_PAGE_EXPANDER_0, + *PTR_MPI2_CONFIG_PAGE_EXPANDER_0, + Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t; + +#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) + +/*values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) + +/*values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + + +/*SAS Expander Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PhysicalPort; /*0x08 */ + U8 + Reserved1; /*0x09 */ + U16 + Reserved2; /*0x0A */ + U8 + NumPhys; /*0x0C */ + U8 + Phy; /*0x0D */ + U16 + NumTableEntriesProgrammed; /*0x0E */ + U8 + ProgrammedLinkRate; /*0x10 */ + U8 + HwLinkRate; /*0x11 */ + U16 + AttachedDevHandle; /*0x12 */ + U32 + PhyInfo; /*0x14 */ + U32 + AttachedDeviceInfo; /*0x18 */ + U16 + ExpanderDevHandle; /*0x1C */ + U8 + ChangeCount; /*0x1E */ + U8 + NegotiatedLinkRate; /*0x1F */ + U8 + PhyIdentifier; /*0x20 */ + U8 + AttachedPhyIdentifier; /*0x21 */ + U8 + Reserved3; /*0x22 */ + U8 + DiscoveryInfo; /*0x23 */ + U32 + AttachedPhyInfo; /*0x24 */ + U8 + ZoneGroup; /*0x28 */ + U8 + SelfConfigStatus; /*0x29 */ + U16 + Reserved4; /*0x2A */ +} MPI2_CONFIG_PAGE_EXPANDER_1, + *PTR_MPI2_CONFIG_PAGE_EXPANDER_1, + Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t; + +#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) + +/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines + *used for the AttachedDeviceInfo field */ + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + +/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + +/*SAS Device Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + Slot; /*0x08 */ + U16 + EnclosureHandle; /*0x0A */ + U64 + SASAddress; /*0x0C */ + U16 + ParentDevHandle; /*0x14 */ + U8 + PhyNum; /*0x16 */ + U8 + AccessStatus; /*0x17 */ + U16 + DevHandle; /*0x18 */ + U8 + AttachedPhyIdentifier; /*0x1A */ + U8 + ZoneGroup; /*0x1B */ + U32 + DeviceInfo; /*0x1C */ + U16 + Flags; /*0x20 */ + U8 + PhysicalPort; /*0x22 */ + U8 + MaxPortConnections; /*0x23 */ + U64 + DeviceName; /*0x24 */ + U8 + PortGroups; /*0x2C */ + U8 + DmaGroup; /*0x2D */ + U8 + ControlGroup; /*0x2E */ + U8 + Reserved1; /*0x2F */ + U32 + Reserved2; /*0x30 */ + U32 + Reserved3; /*0x34 */ +} MPI2_CONFIG_PAGE_SAS_DEV_0, + *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, + Mpi2SasDevicePage0_t, + *pMpi2SasDevicePage0_t; + +#define MPI2_SASDEVICE0_PAGEVERSION (0x08) + +/*values for SAS Device Page 0 AccessStatus field */ +#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) +#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) +#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) +#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) +/*specific values for SATA Init failures */ +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) + +/*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ + +/*values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) +#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000) +#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000) +#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) +#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + + +/*SAS Device Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U64 + SASAddress; /*0x0C */ + U32 + Reserved2; /*0x14 */ + U16 + DevHandle; /*0x18 */ + U16 + Reserved3; /*0x1A */ + U8 + InitialRegDeviceFIS[20];/*0x1C */ +} MPI2_CONFIG_PAGE_SAS_DEV_1, + *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, + Mpi2SasDevicePage1_t, + *pMpi2SasDevicePage1_t; + +#define MPI2_SASDEVICE1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + +/*SAS PHY Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + OwnerDevHandle; /*0x08 */ + U16 + Reserved1; /*0x0A */ + U16 + AttachedDevHandle; /*0x0C */ + U8 + AttachedPhyIdentifier; /*0x0E */ + U8 + Reserved2; /*0x0F */ + U32 + AttachedPhyInfo; /*0x10 */ + U8 + ProgrammedLinkRate; /*0x14 */ + U8 + HwLinkRate; /*0x15 */ + U8 + ChangeCount; /*0x16 */ + U8 + Flags; /*0x17 */ + U32 + PhyInfo; /*0x18 */ + U8 + NegotiatedLinkRate; /*0x1C */ + U8 + Reserved3; /*0x1D */ + U16 + Reserved4; /*0x1E */ +} MPI2_CONFIG_PAGE_SAS_PHY_0, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, + Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t; + +#define MPI2_SASPHY0_PAGEVERSION (0x03) + +/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/*values for SAS PHY Page 0 Flags field */ +#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/*SAS PHY Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U32 + InvalidDwordCount; /*0x0C */ + U32 + RunningDisparityErrorCount; /*0x10 */ + U32 + LossDwordSynchCount; /*0x14 */ + U32 + PhyResetProblemCount; /*0x18 */ +} MPI2_CONFIG_PAGE_SAS_PHY_1, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, + Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t; + +#define MPI2_SASPHY1_PAGEVERSION (0x01) + + +/*SAS PHY Page 2 */ + +typedef struct _MPI2_SASPHY2_PHY_EVENT { + U8 PhyEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 PhyEventInfo; /*0x04 */ +} MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT, + Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t; + +/*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY2_PHY_EVENT_MAX +#define MPI2_SASPHY2_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U8 + NumPhyEvents; /*0x0C */ + U8 + Reserved2; /*0x0D */ + U16 + Reserved3; /*0x0E */ + MPI2_SASPHY2_PHY_EVENT + PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_2, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, + Mpi2SasPhyPage2_t, + *pMpi2SasPhyPage2_t; + +#define MPI2_SASPHY2_PAGEVERSION (0x00) + + +/*SAS PHY Page 3 */ + +typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 CounterType; /*0x04 */ + U8 ThresholdWindow; /*0x05 */ + U8 TimeUnits; /*0x06 */ + U8 Reserved3; /*0x07 */ + U32 EventThreshold; /*0x08 */ + U16 ThresholdFlags; /*0x0C */ + U16 Reserved4; /*0x0E */ +} MPI2_SASPHY3_PHY_EVENT_CONFIG, + *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, + Mpi2SasPhy3PhyEventConfig_t, + *pMpi2SasPhy3PhyEventConfig_t; + +/*values for PhyEventCode field */ +#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) + +/*values for the CounterType field */ +#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/*values for the TimeUnits field */ +#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/*values for the ThresholdFlags field */ +#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY3_PHY_EVENT_MAX +#define MPI2_SASPHY3_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U8 + NumPhyEvents; /*0x0C */ + U8 + Reserved2; /*0x0D */ + U16 + Reserved3; /*0x0E */ + MPI2_SASPHY3_PHY_EVENT_CONFIG + PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_3, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, + Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t; + +#define MPI2_SASPHY3_PAGEVERSION (0x00) + + +/*SAS PHY Page 4 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U16 + Reserved1; /*0x08 */ + U8 + Reserved2; /*0x0A */ + U8 + Flags; /*0x0B */ + U8 + InitialFrame[28]; /*0x0C */ +} MPI2_CONFIG_PAGE_SAS_PHY_4, + *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, + Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t; + +#define MPI2_SASPHY4_PAGEVERSION (0x00) + +/*values for the Flags field */ +#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) +#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) + + + + +/**************************************************************************** +* SAS Port Config Pages +****************************************************************************/ + +/*SAS Port Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U8 + PortNumber; /*0x08 */ + U8 + PhysicalPort; /*0x09 */ + U8 + PortWidth; /*0x0A */ + U8 + PhysicalPortWidth; /*0x0B */ + U8 + ZoneGroup; /*0x0C */ + U8 + Reserved1; /*0x0D */ + U16 + Reserved2; /*0x0E */ + U64 + SASAddress; /*0x10 */ + U32 + DeviceInfo; /*0x18 */ + U32 + Reserved3; /*0x1C */ + U32 + Reserved4; /*0x20 */ +} MPI2_CONFIG_PAGE_SAS_PORT_0, + *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, + Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t; + +#define MPI2_SASPORT0_PAGEVERSION (0x00) + +/*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ + + +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +/*SAS Enclosure Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved1; /*0x08 */ + U64 + EnclosureLogicalID; /*0x0C */ + U16 + Flags; /*0x14 */ + U16 + EnclosureHandle; /*0x16 */ + U16 + NumSlots; /*0x18 */ + U16 + StartSlot; /*0x1A */ + U16 + Reserved2; /*0x1C */ + U16 + SEPDevHandle; /*0x1E */ + U32 + Reserved3; /*0x20 */ + U32 + Reserved4; /*0x24 */ +} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t; + +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) + +/*values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + + +/**************************************************************************** +* Log Config Page +****************************************************************************/ + +/*Log Page 0 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLogEntries at runtime. + */ +#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES +#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_LOG_0_ENTRY { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U16 LogSequence; /*0x0C */ + U16 LogEntryQualifier; /*0x0E */ + U8 VP_ID; /*0x10 */ + U8 VF_ID; /*0x11 */ + U16 Reserved2; /*0x12 */ + U8 + LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */ +} MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY, + Mpi2Log0Entry_t, *pMpi2Log0Entry_t; + +/*values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) +#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) +#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) +#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) + +typedef struct _MPI2_CONFIG_PAGE_LOG_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ + U16 NumLogEntries;/*0x10 */ + U16 Reserved3; /*0x12 */ + MPI2_LOG_0_ENTRY + LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */ +} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0, + Mpi2LogPage0_t, *pMpi2LogPage0_t; + +#define MPI2_LOG_0_PAGEVERSION (0x02) + + +/**************************************************************************** +* RAID Config Page +****************************************************************************/ + +/*RAID Page 0 */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumElements at runtime. + */ +#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS +#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) +#endif + +typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT { + U16 ElementFlags; /*0x00 */ + U16 VolDevHandle; /*0x02 */ + U8 HotSparePool; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 PhysDiskDevHandle; /*0x06 */ +} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + Mpi2RaidConfig0ConfigElement_t, + *pMpi2RaidConfig0ConfigElement_t; + +/*values for the ElementFlags field */ +#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) +#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) +#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) +#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) + + +typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumHotSpares; /*0x08 */ + U8 NumPhysDisks; /*0x09 */ + U8 NumVolumes; /*0x0A */ + U8 ConfigNum; /*0x0B */ + U32 Flags; /*0x0C */ + U8 ConfigGUID[24]; /*0x10 */ + U32 Reserved1; /*0x28 */ + U8 NumElements; /*0x2C */ + U8 Reserved2; /*0x2D */ + U16 Reserved3; /*0x2E */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT + ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */ +} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + Mpi2RaidConfigurationPage0_t, + *pMpi2RaidConfigurationPage0_t; + +#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) + +/*values for RAID Configuration Page 0 Flags field */ +#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) + + +/**************************************************************************** +* Driver Persistent Mapping Config Pages +****************************************************************************/ + +/*Driver Persistent Mapping Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY { + U64 PhysicalIdentifier; /*0x00 */ + U16 MappingInformation; /*0x08 */ + U16 DeviceIndex; /*0x0A */ + U32 PhysicalBitsMapping; /*0x0C */ + U32 Reserved1; /*0x10 */ +} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */ +} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t; + +#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) + +/*values for Driver Persistent Mapping Page 0 MappingInformation field */ +#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) +#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) +#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) + + +/**************************************************************************** +* Ethernet Config Pages +****************************************************************************/ + +/*Ethernet Page 0 */ + +/*IP address (union of IPv4 and IPv6) */ +typedef union _MPI2_ETHERNET_IP_ADDR { + U32 IPv4Addr; + U32 IPv6Addr[4]; +} MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR, + Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t; + +#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 NumInterfaces; /*0x08 */ + U8 Reserved0; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Status; /*0x0C */ + U8 MediaState; /*0x10 */ + U8 Reserved2; /*0x11 */ + U16 Reserved3; /*0x12 */ + U8 MacAddress[6]; /*0x14 */ + U8 Reserved4; /*0x1A */ + U8 Reserved5; /*0x1B */ + MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */ + MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */ + MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */ + MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */ + MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */ + MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */ + U8 + HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_0, + *PTR_MPI2_CONFIG_PAGE_ETHERNET_0, + Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t; + +#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) + +/*values for Ethernet Page 0 Status field */ +#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) +#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) +#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) +#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) +#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) +#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) +#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) +#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) +#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) +#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) + +/*values for Ethernet Page 0 MediaState field */ +#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) +#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) +#define MPI2_ETHPG0_MS_10MBIT (0x01) +#define MPI2_ETHPG0_MS_100MBIT (0x02) +#define MPI2_ETHPG0_MS_1GBIT (0x03) + + +/*Ethernet Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + Reserved0; /*0x08 */ + U32 + Flags; /*0x0C */ + U8 + MediaState; /*0x10 */ + U8 + Reserved1; /*0x11 */ + U16 + Reserved2; /*0x12 */ + U8 + MacAddress[6]; /*0x14 */ + U8 + Reserved3; /*0x1A */ + U8 + Reserved4; /*0x1B */ + MPI2_ETHERNET_IP_ADDR + StaticIpAddress; /*0x1C */ + MPI2_ETHERNET_IP_ADDR + StaticSubnetMask; /*0x2C */ + MPI2_ETHERNET_IP_ADDR + StaticGatewayIpAddress; /*0x3C */ + MPI2_ETHERNET_IP_ADDR + StaticDNS1IpAddress; /*0x4C */ + MPI2_ETHERNET_IP_ADDR + StaticDNS2IpAddress; /*0x5C */ + U32 + Reserved5; /*0x6C */ + U32 + Reserved6; /*0x70 */ + U32 + Reserved7; /*0x74 */ + U32 + Reserved8; /*0x78 */ + U8 + HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_1, + *PTR_MPI2_CONFIG_PAGE_ETHERNET_1, + Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t; + +#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) + +/*values for Ethernet Page 1 Flags field */ +#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) +#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) +#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) +#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) +#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) + +/*values for Ethernet Page 1 MediaState field */ +#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) +#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) +#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) +#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) +#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) + + +/**************************************************************************** +* Extended Manufacturing Config Pages +****************************************************************************/ + +/* + *Generic structure to use for product-specific extended manufacturing pages + *(currently Extended Manufacturing Page 40 through Extended Manufacturing + *Page 60). + */ + +typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { + MPI2_CONFIG_EXTENDED_PAGE_HEADER + Header; /*0x00 */ + U32 + ProductSpecificInfo; /*0x08 */ +} MPI2_CONFIG_PAGE_EXT_MAN_PS, + *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, + Mpi2ExtManufacturingPagePS_t, + *pMpi2ExtManufacturingPagePS_t; + +/*PageVersion should be provided by product-specific code */ + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h new file mode 100644 index 0000000..a079e52 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -0,0 +1,560 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_init.h + * Title: MPI SCSI initiator mode messages and structures + * Creation Date: June 23, 2006 + * + * mpi2_init.h Version: 02.00.14 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to + * Query Asynchronous Event. + * Defined two new bits in the SlotStatus field of the SCSI + * Enclosure Processor Request and Reply. + * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for + * both SCSI IO Error Reply and SCSI Task Management Reply. + * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. + * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. + * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. + * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. + * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. + * 11-18-11 02.00.12 Incorporating additions for MPI v2.5. + * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command + * Priority to match SAM-4. + * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. + * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_INIT_H +#define MPI2_INIT_H + +/***************************************************************************** +* +* SCSI Initiator Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SCSI IO messages and associated structures +****************************************************************************/ + +typedef struct _MPI2_SCSI_IO_CDB_EEDP32 { + U8 CDB[20]; /*0x00 */ + U32 PrimaryReferenceTag; /*0x14 */ + U16 PrimaryApplicationTag; /*0x18 */ + U16 PrimaryApplicationTagMask; /*0x1A */ + U32 TransferLength; /*0x1C */ +} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32, + Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t; + +/*MPI v2.0 CDB field */ +typedef union _MPI2_SCSI_IO_CDB_UNION { + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_SGE_SIMPLE_UNION SGE; +} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION, + Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t; + +/*MPI v2.0 SCSI IO Request Message */ +typedef struct _MPI2_SCSI_IO_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U32 SenseBufferLowAddress; /*0x0C */ + U16 SGLFlags; /*0x10 */ + U8 SenseBufferLength; /*0x12 */ + U8 Reserved4; /*0x13 */ + U8 SGLOffset0; /*0x14 */ + U8 SGLOffset1; /*0x15 */ + U8 SGLOffset2; /*0x16 */ + U8 SGLOffset3; /*0x17 */ + U32 SkipCount; /*0x18 */ + U32 DataLength; /*0x1C */ + U32 BidirectionalDataLength; /*0x20 */ + U16 IoFlags; /*0x24 */ + U16 EEDPFlags; /*0x26 */ + U32 EEDPBlockSize; /*0x28 */ + U32 SecondaryReferenceTag; /*0x2C */ + U16 SecondaryApplicationTag; /*0x30 */ + U16 ApplicationTagTranslationMask; /*0x32 */ + U8 LUN[8]; /*0x34 */ + U32 Control; /*0x3C */ + MPI2_SCSI_IO_CDB_UNION CDB; /*0x40 */ + +#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ + MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + + MPI2_SGE_IO_UNION SGL; /*0x60 */ + +} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST, + Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t; + +/*SCSI IO MsgFlags bits */ + +/*MsgFlags for SenseBufferAddressSpace */ +#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) +#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) + +/*SCSI IO SGLFlags bits */ + +/*base values for Data Location Address Space */ +#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) +#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) +#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) + +/*base values for Type */ +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) + +/*shift values for each sub-field */ +#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) +#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) +#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) +#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) + +/*number of SGLOffset fields */ +#define MPI2_SCSIIO_NUM_SGLOFFSETS (4) + +/*SCSI IO IoFlags bits */ + +/*Large CDB Address Space */ +#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) +#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) +#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) + +#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) +#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) +#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/*SCSI IO EEDPFlags bits */ + +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) + +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) + +#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) + +#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) +#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) +#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) +#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) +#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) + +/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ + +/*SCSI IO Control bits */ +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24) +#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI2_SCSIIO_CONTROL_READ (0x02000000) +#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) + +#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) +/*alternate name for the previous field; called Command Priority in SAM-4 */ +#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11) + +#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) + +#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) +#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) +#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) +#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) + +/*MPI v2.5 CDB field */ +typedef union _MPI25_SCSI_IO_CDB_UNION { + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_IEEE_SGE_SIMPLE64 SGE; +} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION, + Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t; + +/*MPI v2.5 SCSI IO Request Message */ +typedef struct _MPI25_SCSI_IO_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U32 SenseBufferLowAddress; /*0x0C */ + U8 DMAFlags; /*0x10 */ + U8 Reserved5; /*0x11 */ + U8 SenseBufferLength; /*0x12 */ + U8 Reserved4; /*0x13 */ + U8 SGLOffset0; /*0x14 */ + U8 SGLOffset1; /*0x15 */ + U8 SGLOffset2; /*0x16 */ + U8 SGLOffset3; /*0x17 */ + U32 SkipCount; /*0x18 */ + U32 DataLength; /*0x1C */ + U32 BidirectionalDataLength; /*0x20 */ + U16 IoFlags; /*0x24 */ + U16 EEDPFlags; /*0x26 */ + U16 EEDPBlockSize; /*0x28 */ + U16 Reserved6; /*0x2A */ + U32 SecondaryReferenceTag; /*0x2C */ + U16 SecondaryApplicationTag; /*0x30 */ + U16 ApplicationTagTranslationMask; /*0x32 */ + U8 LUN[8]; /*0x34 */ + U32 Control; /*0x3C */ + MPI25_SCSI_IO_CDB_UNION CDB; /*0x40 */ + +#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ + MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + + MPI25_SGE_IO_UNION SGL; /*0x60 */ + +} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST, + Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t; + +/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */ + +/*Defines for the DMAFlags field + * Each setting affects 4 SGLS, from SGL0 to SGL3. + * D = Data + * C = Cache DIF + * I = Interleaved + * H = Host DIF + */ +#define MPI25_SCSIIO_DMAFLAGS_OP_MASK (0x0F) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D (0x00) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C (0x01) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I (0x02) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C (0x03) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I (0x04) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I (0x05) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C (0x06) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I (0x07) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I (0x08) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I (0x09) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D (0x0A) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C (0x0B) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I (0x0C) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C (0x0D) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I (0x0E) +#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I (0x0F) + +/*number of SGLOffset fields */ +#define MPI25_SCSIIO_NUM_SGLOFFSETS (4) + +/*defines for the IoFlags field */ +#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK (0xC000) +#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000) +#define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000) + +#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/*MPI v2.5 defines for the EEDPFlags bits */ +/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */ +#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0) +#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE (0x0000) +#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040) +#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080) +#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0) + +#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030) +#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000) +#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010) + +/*use MPI2_LUN_ defines from mpi2.h for the LUN field */ + +/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */ + +/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so + * MPI2_SCSI_IO_REPLY is used for both. + */ + +/*SCSI IO Error Reply Message */ +typedef struct _MPI2_SCSI_IO_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 SCSIStatus; /*0x0C */ + U8 SCSIState; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TransferCount; /*0x14 */ + U32 SenseCount; /*0x18 */ + U32 ResponseInfo; /*0x1C */ + U16 TaskTag; /*0x20 */ + U16 Reserved4; /*0x22 */ + U32 BidirectionalTransferCount; /*0x24 */ + U32 EEDPErrorOffset; /*0x28 *//*MPI 2.5 only; Reserved in MPI 2.0*/ + U32 Reserved6; /*0x2C */ +} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY, + Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t; + +/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ + +#define MPI2_SCSI_STATUS_GOOD (0x00) +#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI2_SCSI_STATUS_BUSY (0x08) +#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /*obsolete */ +#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) + +/*SCSI IO Reply SCSIState flags */ + +#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI2_SCSI_STATE_TERMINATED (0x08) +#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) + +/*masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSI_RI_SHIFT_REASONCODE (0) + +#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) + +/**************************************************************************** +* SCSI Task Management messages +****************************************************************************/ + +/*SCSI Task Management Request Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved1; /*0x04 */ + U8 TaskType; /*0x05 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 LUN[8]; /*0x0C */ + U32 Reserved4[7]; /*0x14 */ + U16 TaskMID; /*0x30 */ + U16 Reserved5; /*0x32 */ +} MPI2_SCSI_TASK_MANAGE_REQUEST, + *PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, + Mpi2SCSITaskManagementRequest_t, + *pMpi2SCSITaskManagementRequest_t; + +/*TaskType values */ + +#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) + +/*obsolete TaskType name */ +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ + (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) + +/*MsgFlags bits */ + +#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) +#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) + +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) + +/*SCSI Task Management Reply Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 ResponseCode; /*0x04 */ + U8 TaskType; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TerminationCount; /*0x14 */ + U32 ResponseInfo; /*0x18 */ +} MPI2_SCSI_TASK_MANAGE_REPLY, + *PTR_MPI2_SCSI_TASK_MANAGE_REPLY, + Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t; + +/*ResponseCode values */ + +#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) +#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + +/*masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) + +/**************************************************************************** +* SCSI Enclosure Processor messages +****************************************************************************/ + +/*SCSI Enclosure Processor Request Message */ +typedef struct _MPI2_SEP_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Action; /*0x04 */ + U8 Flags; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 SlotStatus; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ + U16 Slot; /*0x1C */ + U16 EnclosureHandle; /*0x1E */ +} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST, + Mpi2SepRequest_t, *pMpi2SepRequest_t; + +/*Action defines */ +#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) + +/*Flags defines */ +#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) +#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) + +/*SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) + +/*SCSI Enclosure Processor Reply Message */ +typedef struct _MPI2_SEP_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 Action; /*0x04 */ + U8 Flags; /*0x05 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 SlotStatus; /*0x14 */ + U32 Reserved4; /*0x18 */ + U16 Slot; /*0x1C */ + U16 EnclosureHandle; /*0x1E */ +} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY, + Mpi2SepReply_t, *pMpi2SepReply_t; + +/*SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h new file mode 100644 index 0000000..0de425d --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -0,0 +1,1665 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: October 11, 2006 + * + * mpi2_ioc.h Version: 02.00.21 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. + * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. + * Added two new reason codes for SAS Device Status Change + * Event. + * Added new event: SAS PHY Counter. + * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. + * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Added new product id family for 2208. + * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. + * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. + * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. + * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. + * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. + * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. + * Added Host Based Discovery Phy Event data. + * Added defines for ProductID Product field + * (MPI2_FW_HEADER_PID_). + * Modified values for SAS ProductID Family + * (MPI2_FW_HEADER_PID_FAMILY_). + * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. + * Added PowerManagementControl Request structures and + * defines. + * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. + * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. + * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. + * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added + * SASNotifyPrimitiveMasks field to + * MPI2_EVENT_NOTIFICATION_REQUEST. + * Added Temperature Threshold Event. + * Added Host Message Event. + * Added Send Host Message request and reply. + * 05-25-11 02.00.18 For Extended Image Header, added + * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and + * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. + * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. + * 08-24-11 02.00.19 Added PhysicalPort field to + * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. + * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. + * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. + * 03-29-12 02.00.21 Added a product specific range to event values. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_IOC_H +#define MPI2_IOC_H + +/***************************************************************************** +* +* IOC Messages +* +*****************************************************************************/ + +/**************************************************************************** +* IOCInit message +****************************************************************************/ + +/*IOCInit Request message */ +typedef struct _MPI2_IOC_INIT_REQUEST { + U8 WhoInit; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 MsgVersion; /*0x0C */ + U16 HeaderVersion; /*0x0E */ + U32 Reserved5; /*0x10 */ + U16 Reserved6; /*0x14 */ + U8 Reserved7; /*0x16 */ + U8 HostMSIxVectors; /*0x17 */ + U16 Reserved8; /*0x18 */ + U16 SystemRequestFrameSize; /*0x1A */ + U16 ReplyDescriptorPostQueueDepth; /*0x1C */ + U16 ReplyFreeQueueDepth; /*0x1E */ + U32 SenseBufferAddressHigh; /*0x20 */ + U32 SystemReplyAddressHigh; /*0x24 */ + U64 SystemRequestFrameBaseAddress; /*0x28 */ + U64 ReplyDescriptorPostQueueAddress; /*0x30 */ + U64 ReplyFreeQueueAddress; /*0x38 */ + U64 TimeStamp; /*0x40 */ +} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, + Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; + +/*WhoInit values */ +#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI2_WHOINIT_ROM_BIOS (0x02) +#define MPI2_WHOINIT_PCI_PEER (0x03) +#define MPI2_WHOINIT_HOST_DRIVER (0x04) +#define MPI2_WHOINIT_MANUFACTURER (0x05) + +/*MsgVersion */ +#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/*HeaderVersion */ +#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) + +/*minimum depth for the Reply Descriptor Post Queue */ +#define MPI2_RDPQ_DEPTH_MIN (16) + +/*IOCInit Reply message */ +typedef struct _MPI2_IOC_INIT_REPLY { + U8 WhoInit; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, + Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; + +/**************************************************************************** +* IOCFacts message +****************************************************************************/ + +/*IOCFacts Request message */ +typedef struct _MPI2_IOC_FACTS_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, + Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; + +/*IOCFacts Reply message */ +typedef struct _MPI2_IOC_FACTS_REPLY { + U16 MsgVersion; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 HeaderVersion; /*0x04 */ + U8 IOCNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U16 IOCExceptions; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 MaxChainDepth; /*0x14 */ + U8 WhoInit; /*0x15 */ + U8 NumberOfPorts; /*0x16 */ + U8 MaxMSIxVectors; /*0x17 */ + U16 RequestCredit; /*0x18 */ + U16 ProductID; /*0x1A */ + U32 IOCCapabilities; /*0x1C */ + MPI2_VERSION_UNION FWVersion; /*0x20 */ + U16 IOCRequestFrameSize; /*0x24 */ + U16 IOCMaxChainSegmentSize; /*0x26 */ + U16 MaxInitiators; /*0x28 */ + U16 MaxTargets; /*0x2A */ + U16 MaxSasExpanders; /*0x2C */ + U16 MaxEnclosures; /*0x2E */ + U16 ProtocolFlags; /*0x30 */ + U16 HighPriorityCredit; /*0x32 */ + U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ + U8 ReplyFrameSize; /*0x36 */ + U8 MaxVolumes; /*0x37 */ + U16 MaxDevHandle; /*0x38 */ + U16 MaxPersistentEntries; /*0x3A */ + U16 MinDevHandle; /*0x3C */ + U16 Reserved4; /*0x3E */ +} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, + Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; + +/*MsgVersion */ +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) + +/*HeaderVersion */ +#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) + +/*IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) + +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) + +#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) +#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) +#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) + +/*defines for WhoInit field are after the IOCInit Request */ + +/*ProductID field uses MPI2_FW_HEADER_PID_ */ + +/*IOCCapabilities */ +#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) +#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) +#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) +#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) +#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) +#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) +#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) +#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) +#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) +#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) +#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) + +/*ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) + +/**************************************************************************** +* PortFacts message +****************************************************************************/ + +/*PortFacts Request message */ +typedef struct _MPI2_PORT_FACTS_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 PortNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ +} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, + Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; + +/*PortFacts Reply message */ +typedef struct _MPI2_PORT_FACTS_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 PortNumber; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 Reserved5; /*0x14 */ + U8 PortType; /*0x15 */ + U16 Reserved6; /*0x16 */ + U16 MaxPostedCmdBuffers; /*0x18 */ + U16 Reserved7; /*0x1A */ +} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, + Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; + +/*PortType values */ +#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) +#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) + +/**************************************************************************** +* PortEnable message +****************************************************************************/ + +/*PortEnable Request message */ +typedef struct _MPI2_PORT_ENABLE_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved2; /*0x04 */ + U8 PortFlags; /*0x05 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, + Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; + +/*PortEnable Reply message */ +typedef struct _MPI2_PORT_ENABLE_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U8 Reserved2; /*0x04 */ + U8 PortFlags; /*0x05 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, + Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; + +/**************************************************************************** +* EventNotification message +****************************************************************************/ + +/*EventNotification Request message */ +#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ + U16 SASBroadcastPrimitiveMasks; /*0x24 */ + U16 SASNotifyPrimitiveMasks; /*0x26 */ + U32 Reserved8; /*0x28 */ +} MPI2_EVENT_NOTIFICATION_REQUEST, + *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, + Mpi2EventNotificationRequest_t, + *pMpi2EventNotificationRequest_t; + +/*EventNotification Reply message */ +typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { + U16 EventDataLength; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 AckRequired; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U16 Event; /*0x14 */ + U16 Reserved4; /*0x16 */ + U32 EventContext; /*0x18 */ + U32 EventData[1]; /*0x1C */ +} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, + Mpi2EventNotificationReply_t, + *pMpi2EventNotificationReply_t; + +/*AckRequired */ +#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/*Event */ +#define MPI2_EVENT_LOG_DATA (0x0001) +#define MPI2_EVENT_STATE_CHANGE (0x0002) +#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) +#define MPI2_EVENT_EVENT_CHANGE (0x000A) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ +#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) +#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) +#define MPI2_EVENT_SAS_DISCOVERY (0x0016) +#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) +#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) +#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) +#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) +#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_IR_VOLUME (0x001E) +#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) +#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) +#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) +#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) +#define MPI2_EVENT_GPIO_INTERRUPT (0x0023) +#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) +#define MPI2_EVENT_SAS_QUIESCE (0x0025) +#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) +#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) +#define MPI2_EVENT_HOST_MESSAGE (0x0028) +#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) +#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) +#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) + +/*Log Entry Added Event data */ + +/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ +#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U16 LogSequence; /*0x0C */ + U16 LogEntryQualifier; /*0x0E */ + U8 VP_ID; /*0x10 */ + U8 VF_ID; /*0x11 */ + U16 Reserved2; /*0x12 */ + U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ +} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + Mpi2EventDataLogEntryAdded_t, + *pMpi2EventDataLogEntryAdded_t; + +/*GPIO Interrupt Event data */ + +typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { + U8 GPIONum; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_EVENT_DATA_GPIO_INTERRUPT, + *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, + Mpi2EventDataGpioInterrupt_t, + *pMpi2EventDataGpioInterrupt_t; + +/*Temperature Threshold Event data */ + +typedef struct _MPI2_EVENT_DATA_TEMPERATURE { + U16 Status; /*0x00 */ + U8 SensorNum; /*0x02 */ + U8 Reserved1; /*0x03 */ + U16 CurrentTemperature; /*0x04 */ + U16 Reserved2; /*0x06 */ + U32 Reserved3; /*0x08 */ + U32 Reserved4; /*0x0C */ +} MPI2_EVENT_DATA_TEMPERATURE, + *PTR_MPI2_EVENT_DATA_TEMPERATURE, + Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; + +/*Temperature Threshold Event data Status bits */ +#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) +#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) +#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) +#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) + +/*Host Message Event data */ + +typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { + U8 SourceVF_ID; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ + U32 HostData[1]; /*0x08 */ +} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, + Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; + +/*Power Performance Change Event */ + +typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { + U8 CurrentPowerMode; /*0x00 */ + U8 PreviousPowerMode; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_EVENT_DATA_POWER_PERF_CHANGE, + *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, + Mpi2EventDataPowerPerfChange_t, + *pMpi2EventDataPowerPerfChange_t; + +/*defines for CurrentPowerMode and PreviousPowerMode fields */ +#define MPI2_EVENT_PM_INIT_MASK (0xC0) +#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) +#define MPI2_EVENT_PM_INIT_HOST (0x40) +#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) +#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) + +#define MPI2_EVENT_PM_MODE_MASK (0x07) +#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) +#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) +#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) +#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) +#define MPI2_EVENT_PM_MODE_STANDBY (0x06) + +/*Hard Reset Received Event data */ + +typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { + U8 Reserved1; /*0x00 */ + U8 Port; /*0x01 */ + U16 Reserved2; /*0x02 */ +} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi2EventDataHardResetReceived_t, + *pMpi2EventDataHardResetReceived_t; + +/*Task Set Full Event data */ +/* this event is obsolete */ + +typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { + U16 DevHandle; /*0x00 */ + U16 CurrentDepth; /*0x02 */ +} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, + Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; + +/*SAS Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { + U16 TaskTag; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U8 ASC; /*0x04 */ + U8 ASCQ; /*0x05 */ + U16 DevHandle; /*0x06 */ + U32 Reserved2; /*0x08 */ + U64 SASAddress; /*0x0C */ + U8 LUN[8]; /*0x14 */ +} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + Mpi2EventDataSasDeviceStatusChange_t, + *pMpi2EventDataSasDeviceStatusChange_t; + +/*SAS Device Status Change Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) + +/*Integrated RAID Operation Status Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { + U16 VolDevHandle; /*0x00 */ + U16 Reserved1; /*0x02 */ + U8 RAIDOperation; /*0x04 */ + U8 PercentComplete; /*0x05 */ + U16 Reserved2; /*0x06 */ + U32 Resereved3; /*0x08 */ +} MPI2_EVENT_DATA_IR_OPERATION_STATUS, + *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, + Mpi2EventDataIrOperationStatus_t, + *pMpi2EventDataIrOperationStatus_t; + +/*Integrated RAID Operation Status Event data RAIDOperation values */ +#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) +#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) +#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) +#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) + +/*Integrated RAID Volume Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_VOLUME { + U16 VolDevHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 NewValue; /*0x04 */ + U32 PreviousValue; /*0x08 */ +} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, + Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; + +/*Integrated RAID Volume Event data ReasonCode values */ +#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) + +/*Integrated RAID Physical Disk Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { + U16 Reserved1; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysDiskNum; /*0x03 */ + U16 PhysDiskDevHandle; /*0x04 */ + U16 Reserved2; /*0x06 */ + U16 Slot; /*0x08 */ + U16 EnclosureHandle; /*0x0A */ + U32 NewValue; /*0x0C */ + U32 PreviousValue; /*0x10 */ +} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + Mpi2EventDataIrPhysicalDisk_t, + *pMpi2EventDataIrPhysicalDisk_t; + +/*Integrated RAID Physical Disk Event data ReasonCode values */ +#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) + +/*Integrated RAID Configuration Change List Event data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumElements at runtime. + */ +#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT +#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { + U16 ElementFlags; /*0x00 */ + U16 VolDevHandle; /*0x02 */ + U8 ReasonCode; /*0x04 */ + U8 PhysDiskNum; /*0x05 */ + U16 PhysDiskDevHandle; /*0x06 */ +} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, + Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; + +/*IR Configuration Change List Event data ElementFlags values */ +#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) + +/*IR Configuration Change List Event data ReasonCode values */ +#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) +#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) +#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) +#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) +#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) +#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) +#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) + +typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { + U8 NumElements; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 Reserved2; /*0x02 */ + U8 ConfigNum; /*0x03 */ + U32 Flags; /*0x04 */ + MPI2_EVENT_IR_CONFIG_ELEMENT + ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ +} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + Mpi2EventDataIrConfigChangeList_t, + *pMpi2EventDataIrConfigChangeList_t; + +/*IR Configuration Change List Event data Flags values */ +#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) + +/*SAS Discovery Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { + U8 Flags; /*0x00 */ + U8 ReasonCode; /*0x01 */ + U8 PhysicalPort; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 DiscoveryStatus; /*0x04 */ +} MPI2_EVENT_DATA_SAS_DISCOVERY, + *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, + Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; + +/*SAS Discovery Event data Flags values */ +#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) +#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) + +/*SAS Discovery Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/*SAS Discovery Event data DiscoveryStatus values */ +#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) +#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) + +/*SAS Broadcast Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { + U8 PhyNum; /*0x00 */ + U8 Port; /*0x01 */ + U8 PortWidth; /*0x02 */ + U8 Primitive; /*0x03 */ +} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi2EventDataSasBroadcastPrimitive_t, + *pMpi2EventDataSasBroadcastPrimitive_t; + +/*defines for the Primitive field */ +#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI2_EVENT_PRIMITIVE_SES (0x02) +#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + +/*SAS Notify Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /*0x00 */ + U8 Port; /*0x01 */ + U8 Reserved1; /*0x02 */ + U8 Primitive; /*0x03 */ +} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, + *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, + Mpi2EventDataSasNotifyPrimitive_t, + *pMpi2EventDataSasNotifyPrimitive_t; + +/*defines for the Primitive field */ +#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) +#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) +#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) +#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) + +/*SAS Initiator Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { + U8 ReasonCode; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U16 DevHandle; /*0x02 */ + U64 SASAddress; /*0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi2EventDataSasInitDevStatusChange_t, + *pMpi2EventDataSasInitDevStatusChange_t; + +/*SAS Initiator Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + +/*SAS Initiator Device Table Overflow Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { + U16 MaxInit; /*0x00 */ + U16 CurrentInit; /*0x02 */ + U64 SASAddress; /*0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi2EventDataSasInitTableOverflow_t, + *pMpi2EventDataSasInitTableOverflow_t; + +/*SAS Topology Change List Event data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumEntries at runtime. + */ +#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT +#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { + U16 AttachedDevHandle; /*0x00 */ + U8 LinkRate; /*0x02 */ + U8 PhyStatus; /*0x03 */ +} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; + +typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /*0x00 */ + U16 ExpanderDevHandle; /*0x02 */ + U8 NumPhys; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U8 NumEntries; /*0x08 */ + U8 StartPhyNum; /*0x09 */ + U8 ExpStatus; /*0x0A */ + U8 PhysicalPort; /*0x0B */ + MPI2_EVENT_SAS_TOPO_PHY_ENTRY + PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ +} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi2EventDataSasTopologyChangeList_t, + *pMpi2EventDataSasTopologyChangeList_t; + +/*values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) +#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/*defines for the LinkRate field */ +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) + +#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) +#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) + +/*values for the PhyStatus field */ +#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) +#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) +/*values for the PhyStatus ReasonCode sub-field */ +#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) +#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) +#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) + +/*SAS Enclosure Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { + U16 EnclosureHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U64 EnclosureLogicalID; /*0x04 */ + U16 NumSlots; /*0x0C */ + U16 StartSlot; /*0x0E */ + U32 PhyBits; /*0x10 */ +} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + Mpi2EventDataSasEnclDevStatusChange_t, + *pMpi2EventDataSasEnclDevStatusChange_t; + +/*SAS Enclosure Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) + +/*SAS PHY Counter Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 PhyEventCode; /*0x0C */ + U8 PhyNum; /*0x0D */ + U16 Reserved2; /*0x0E */ + U32 PhyEventInfo; /*0x10 */ + U8 CounterType; /*0x14 */ + U8 ThresholdWindow; /*0x15 */ + U8 TimeUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ + U32 EventThreshold; /*0x18 */ + U16 ThresholdFlags; /*0x1C */ + U16 Reserved4; /*0x1E */ +} MPI2_EVENT_DATA_SAS_PHY_COUNTER, + *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, + Mpi2EventDataSasPhyCounter_t, + *pMpi2EventDataSasPhyCounter_t; + +/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h + *for the PhyEventCode field */ + +/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h + *for the CounterType field */ + +/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h + *for the TimeUnits field */ + +/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h + *for the ThresholdFlags field */ + +/*SAS Quiesce Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { + U8 ReasonCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ +} MPI2_EVENT_DATA_SAS_QUIESCE, + *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, + Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; + +/*SAS Quiesce Event data ReasonCode values */ +#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) + +/*Host Based Discovery Phy Event data */ + +typedef struct _MPI2_EVENT_HBD_PHY_SAS { + U8 Flags; /*0x00 */ + U8 NegotiatedLinkRate; /*0x01 */ + U8 PhyNum; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U32 Reserved1; /*0x04 */ + U8 InitialFrame[28]; /*0x08 */ +} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, + Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; + +/*values for the Flags field */ +#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) +#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) + +/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h + *for the NegotiatedLinkRate field */ + +typedef union _MPI2_EVENT_HBD_DESCRIPTOR { + MPI2_EVENT_HBD_PHY_SAS Sas; +} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, + Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; + +typedef struct _MPI2_EVENT_DATA_HBD_PHY { + U8 DescriptorType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Reserved3; /*0x04 */ + MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ +} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, + Mpi2EventDataHbdPhy_t, + *pMpi2EventDataMpi2EventDataHbdPhy_t; + +/*values for the DescriptorType field */ +#define MPI2_EVENT_HBD_DT_SAS (0x01) + +/**************************************************************************** +* EventAck message +****************************************************************************/ + +/*EventAck Request message */ +typedef struct _MPI2_EVENT_ACK_REQUEST { + U16 Reserved1; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Event; /*0x0C */ + U16 Reserved5; /*0x0E */ + U32 EventContext; /*0x10 */ +} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, + Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; + +/*EventAck Reply message */ +typedef struct _MPI2_EVENT_ACK_REPLY { + U16 Reserved1; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, + Mpi2EventAckReply_t, *pMpi2EventAckReply_t; + +/**************************************************************************** +* SendHostMessage message +****************************************************************************/ + +/*SendHostMessage Request message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { + U16 HostDataLength; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U8 Reserved4; /*0x0C */ + U8 DestVF_ID; /*0x0D */ + U16 Reserved5; /*0x0E */ + U32 Reserved6; /*0x10 */ + U32 Reserved7; /*0x14 */ + U32 Reserved8; /*0x18 */ + U32 Reserved9; /*0x1C */ + U32 Reserved10; /*0x20 */ + U32 HostData[1]; /*0x24 */ +} MPI2_SEND_HOST_MESSAGE_REQUEST, + *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, + Mpi2SendHostMessageRequest_t, + *pMpi2SendHostMessageRequest_t; + +/*SendHostMessage Reply message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { + U16 HostDataLength; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved1; /*0x04 */ + U8 Reserved2; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, + Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; + +/**************************************************************************** +* FWDownload message +****************************************************************************/ + +/*MPI v2.0 FWDownload Request message */ +typedef struct _MPI2_FW_DOWNLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 TotalImageSize; /*0x0C */ + U32 Reserved5; /*0x10 */ + MPI2_MPI_SGE_UNION SGL; /*0x14 */ +} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, + Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; + +#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) + +/*MPI v2.0 FWDownload TransactionContext Element */ +typedef struct _MPI2_FW_DOWNLOAD_TCSGE { + U8 Reserved1; /*0x00 */ + U8 ContextSize; /*0x01 */ + U8 DetailsLength; /*0x02 */ + U8 Flags; /*0x03 */ + U32 Reserved2; /*0x04 */ + U32 ImageOffset; /*0x08 */ + U32 ImageSize; /*0x0C */ +} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, + Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; + +/*MPI v2.5 FWDownload Request message */ +typedef struct _MPI25_FW_DOWNLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 TotalImageSize; /*0x0C */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ + U32 ImageOffset; /*0x18 */ + U32 ImageSize; /*0x1C */ + MPI25_SGE_IO_UNION SGL; /*0x20 */ +} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, + Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; + +/*FWDownload Reply message */ +typedef struct _MPI2_FW_DOWNLOAD_REPLY { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, + Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; + +/**************************************************************************** +* FWUpload message +****************************************************************************/ + +/*MPI v2.0 FWUpload Request message */ +typedef struct _MPI2_FW_UPLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + MPI2_MPI_SGE_UNION SGL; /*0x14 */ +} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, + Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; + +#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) +#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) +#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +/*MPI v2.0 FWUpload TransactionContext Element */ +typedef struct _MPI2_FW_UPLOAD_TCSGE { + U8 Reserved1; /*0x00 */ + U8 ContextSize; /*0x01 */ + U8 DetailsLength; /*0x02 */ + U8 Flags; /*0x03 */ + U32 Reserved2; /*0x04 */ + U32 ImageOffset; /*0x08 */ + U32 ImageSize; /*0x0C */ +} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, + Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; + +/*MPI v2.5 FWUpload Request message */ +typedef struct _MPI25_FW_UPLOAD_REQUEST { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U32 Reserved7; /*0x14 */ + U32 ImageOffset; /*0x18 */ + U32 ImageSize; /*0x1C */ + MPI25_SGE_IO_UNION SGL; /*0x20 */ +} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, + Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; + +/*FWUpload Reply message */ +typedef struct _MPI2_FW_UPLOAD_REPLY { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 ActualImageSize; /*0x14 */ +} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, + Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; + +/*FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER { + U32 Signature; /*0x00 */ + U32 Signature0; /*0x04 */ + U32 Signature1; /*0x08 */ + U32 Signature2; /*0x0C */ + MPI2_VERSION_UNION MPIVersion; /*0x10 */ + MPI2_VERSION_UNION FWVersion; /*0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ + MPI2_VERSION_UNION PackageVersion; /*0x1C */ + U16 VendorID; /*0x20 */ + U16 ProductID; /*0x22 */ + U16 ProtocolFlags; /*0x24 */ + U16 Reserved26; /*0x26 */ + U32 IOCCapabilities; /*0x28 */ + U32 ImageSize; /*0x2C */ + U32 NextImageHeaderOffset; /*0x30 */ + U32 Checksum; /*0x34 */ + U32 Reserved38; /*0x38 */ + U32 Reserved3C; /*0x3C */ + U32 Reserved40; /*0x40 */ + U32 Reserved44; /*0x44 */ + U32 Reserved48; /*0x48 */ + U32 Reserved4C; /*0x4C */ + U32 Reserved50; /*0x50 */ + U32 Reserved54; /*0x54 */ + U32 Reserved58; /*0x58 */ + U32 Reserved5C; /*0x5C */ + U32 Reserved60; /*0x60 */ + U32 FirmwareVersionNameWhat; /*0x64 */ + U8 FirmwareVersionName[32]; /*0x68 */ + U32 VendorNameWhat; /*0x88 */ + U8 VendorName[32]; /*0x8C */ + U32 PackageNameWhat; /*0x88 */ + U8 PackageName[32]; /*0x8C */ + U32 ReservedD0; /*0xD0 */ + U32 ReservedD4; /*0xD4 */ + U32 ReservedD8; /*0xD8 */ + U32 ReservedDC; /*0xDC */ + U32 ReservedE0; /*0xE0 */ + U32 ReservedE4; /*0xE4 */ + U32 ReservedE8; /*0xE8 */ + U32 ReservedEC; /*0xEC */ + U32 ReservedF0; /*0xF0 */ + U32 ReservedF4; /*0xF4 */ + U32 ReservedF8; /*0xF8 */ + U32 ReservedFC; /*0xFC */ +} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; + +/*Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) + +/*Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) + +/*Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) + +/*Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) + +/*defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) +#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) +#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/*SAS ProductID Family bits */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) +#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) +#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) + +/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + +/*Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Checksum; /*0x04 */ + U32 ImageSize; /*0x08 */ + U32 NextImageHeaderOffset; /*0x0C */ + U32 PackageVersion; /*0x10 */ + U32 Reserved3; /*0x14 */ + U32 Reserved4; /*0x18 */ + U32 Reserved5; /*0x1C */ + U8 IdentifyString[32]; /*0x20 */ +} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; + +/*useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/*defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) +#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) + +/*FLASH Layout Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION { + U8 RegionType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 RegionOffset; /*0x04 */ + U32 RegionSize; /*0x08 */ + U32 Reserved3; /*0x0C */ +} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, *pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT { + U32 FlashSize; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Reserved3; /*0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ +} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, *pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 SizeOfRegion; /*0x02 */ + U8 Reserved2; /*0x03 */ + U16 NumberOfLayouts; /*0x04 */ + U16 RegionsPerLayout; /*0x06 */ + U16 MinimumSectorAlignment; /*0x08 */ + U16 Reserved3; /*0x0A */ + U32 Reserved4; /*0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ +} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; + +/*defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_INIT (0x0A) + +/*ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + +/*Supported Devices Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE { + U16 DeviceID; /*0x00 */ + U16 VendorID; /*0x02 */ + U16 DeviceIDMask; /*0x04 */ + U16 Reserved1; /*0x06 */ + U8 LowPCIRev; /*0x08 */ + U8 HighPCIRev; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ +} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 NumberOfDevices; /*0x02 */ + U8 Reserved2; /*0x03 */ + U32 Reserved3; /*0x04 */ + MPI2_SUPPORTED_DEVICE + SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; + +/*ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + +/*Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER { + U32 BootFlags; /*0x00 */ + U32 ImageSize; /*0x04 */ + U32 Signature0; /*0x08 */ + U32 Signature1; /*0x0C */ + U32 Signature2; /*0x10 */ + U32 ResetVector; /*0x14 */ +} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; + +/*defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/*defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/*defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/*defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/*defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/*Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/*defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + +/**************************************************************************** +* PowerManagementControl message +****************************************************************************/ + +/*PowerManagementControl Request message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { + U8 Feature; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 Parameter1; /*0x0C */ + U8 Parameter2; /*0x0D */ + U8 Parameter3; /*0x0E */ + U8 Parameter4; /*0x0F */ + U32 Reserved5; /*0x10 */ + U32 Reserved6; /*0x14 */ +} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, + Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; + +/*defines for the Feature field */ +#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) +#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) +#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ +#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) +#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ +/*Parameter1 contains a PHY number */ +/*Parameter2 indicates power condition action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) +#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) +#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) +/*Parameter3 and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION + * Feature */ +/*Parameter1 contains SAS port width modulation group number */ +/*Parameter2 indicates IOC action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) +#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) +#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) +/*Parameter3 indicates desired modulation level using these defines */ +#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) +#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) +#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) +#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) +/*Parameter4 is reserved */ + +/*this next set (_PCIE_LINK) is obsolete */ +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ +/*Parameter1 indicates desired PCIe link speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ +/*Parameter2 indicates desired PCIe link width using these defines */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ +/*Parameter3 and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ +/*Parameter1 indicates desired IOC hardware clock speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) +#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) +#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) +/*Parameter2, Parameter3, and Parameter4 are reserved */ + +/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ +/*Parameter1 indicates host action regarding global power management mode */ +#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) +#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) +#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) +/*Parameter2 indicates the requested global power management mode */ +#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) +#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) +#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) +/*Parameter3 and Parameter4 are reserved */ + +/*PowerManagementControl Reply message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { + U8 Feature; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, + Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h new file mode 100644 index 0000000..d1d9866 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h @@ -0,0 +1,346 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_raid.h + * Title: MPI Integrated RAID messages and structures + * Creation Date: April 26, 2007 + * + * mpi2_raid.h Version: 02.00.08 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of + * VolumeCreationFlags and marked the old one as obsolete. + * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. + * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with + * related structures and defines. + * Added product-specific range to RAID Action values. + * 11-18-11 02.00.07 Incorporating additions for MPI v2.5. + * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_RAID_H +#define MPI2_RAID_H + +/***************************************************************************** +* +* Integrated RAID Messages +* +*****************************************************************************/ + +/**************************************************************************** +* RAID Action messages +****************************************************************************/ + +/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ +#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001) + +/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for + *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/*ActionDataWord defines for use with + *MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */ +#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001) + +/*ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */ +typedef struct _MPI2_RAID_ACTION_RATE_DATA { + U8 RateToChange; /*0x00 */ + U8 RateOrMode; /*0x01 */ + U16 DataScrubDuration; /*0x02 */ +} MPI2_RAID_ACTION_RATE_DATA, *PTR_MPI2_RAID_ACTION_RATE_DATA, + Mpi2RaidActionRateData_t, *pMpi2RaidActionRateData_t; + +#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00) +#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01) +#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02) + +/*ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION { + U8 RAIDFunction; /*0x00 */ + U8 Flags; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_START_RAID_FUNCTION, + *PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION, + Mpi2RaidActionStartRaidFunction_t, + *pMpi2RaidActionStartRaidFunction_t; + +/*defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02) + +/*defines for the Flags field */ +#define MPI2_RAID_ACTION_START_NEW (0x00) +#define MPI2_RAID_ACTION_START_RESUME (0x01) + +/*ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION { + U8 RAIDFunction; /*0x00 */ + U8 Flags; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + *PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + Mpi2RaidActionStopRaidFunction_t, + *pMpi2RaidActionStopRaidFunction_t; + +/*defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02) + +/*defines for the Flags field */ +#define MPI2_RAID_ACTION_STOP_ABORT (0x00) +#define MPI2_RAID_ACTION_STOP_PAUSE (0x01) + +/*ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */ +typedef struct _MPI2_RAID_ACTION_HOT_SPARE { + U8 HotSparePool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 DevHandle; /*0x02 */ +} MPI2_RAID_ACTION_HOT_SPARE, *PTR_MPI2_RAID_ACTION_HOT_SPARE, + Mpi2RaidActionHotSpare_t, *pMpi2RaidActionHotSpare_t; + +/*ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */ +typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE { + U8 Flags; /*0x00 */ + U8 DeviceFirmwareUpdateModeTimeout; /*0x01 */ + U16 Reserved1; /*0x02 */ +} MPI2_RAID_ACTION_FW_UPDATE_MODE, + *PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE, + Mpi2RaidActionFwUpdateMode_t, + *pMpi2RaidActionFwUpdateMode_t; + +/*ActionDataWord defines for use with + *MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */ +#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00) +#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01) + +typedef union _MPI2_RAID_ACTION_DATA { + U32 Word; + MPI2_RAID_ACTION_RATE_DATA Rates; + MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction; + MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction; + MPI2_RAID_ACTION_HOT_SPARE HotSpare; + MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode; +} MPI2_RAID_ACTION_DATA, *PTR_MPI2_RAID_ACTION_DATA, + Mpi2RaidActionData_t, *pMpi2RaidActionData_t; + +/*RAID Action Request Message */ +typedef struct _MPI2_RAID_ACTION_REQUEST { + U8 Action; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 VolDevHandle; /*0x04 */ + U8 PhysDiskNum; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ + MPI2_RAID_ACTION_DATA ActionDataWord; /*0x10 */ + MPI2_SGE_SIMPLE_UNION ActionDataSGE; /*0x14 */ +} MPI2_RAID_ACTION_REQUEST, *PTR_MPI2_RAID_ACTION_REQUEST, + Mpi2RaidActionRequest_t, *pMpi2RaidActionRequest_t; + +/*RAID Action request Action values */ + +#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04) +#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05) +#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17) +#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18) +#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19) +#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C) +#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D) +#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E) +#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) +#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) +#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) +#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23) +#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24) +#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF) + +/*RAID Volume Creation Structure */ + +/* + *The following define can be customized for the targeted product. + */ +#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS +#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1) +#endif + +typedef struct _MPI2_RAID_VOLUME_PHYSDISK { + U8 RAIDSetNum; /*0x00 */ + U8 PhysDiskMap; /*0x01 */ + U16 PhysDiskDevHandle; /*0x02 */ +} MPI2_RAID_VOLUME_PHYSDISK, *PTR_MPI2_RAID_VOLUME_PHYSDISK, + Mpi2RaidVolumePhysDisk_t, *pMpi2RaidVolumePhysDisk_t; + +/*defines for the PhysDiskMap field */ +#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT { + U8 NumPhysDisks; /*0x00 */ + U8 VolumeType; /*0x01 */ + U16 Reserved1; /*0x02 */ + U32 VolumeCreationFlags; /*0x04 */ + U32 VolumeSettings; /*0x08 */ + U8 Reserved2; /*0x0C */ + U8 ResyncRate; /*0x0D */ + U16 DataScrubDuration; /*0x0E */ + U64 VolumeMaxLBA; /*0x10 */ + U32 StripeSize; /*0x18 */ + U8 Name[16]; /*0x1C */ + MPI2_RAID_VOLUME_PHYSDISK + PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS]; /*0x2C */ +} MPI2_RAID_VOLUME_CREATION_STRUCT, + *PTR_MPI2_RAID_VOLUME_CREATION_STRUCT, + Mpi2RaidVolumeCreationStruct_t, + *pMpi2RaidVolumeCreationStruct_t; + +/*use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ + +/*defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001) +/*The following is an obsolete define. + *It must be shifted left 24 bits in order to set the proper bit. + */ +#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) + +/*RAID Online Capacity Expansion Structure */ + +typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION { + U32 Flags; /*0x00 */ + U16 DevHandle0; /*0x04 */ + U16 Reserved1; /*0x06 */ + U16 DevHandle1; /*0x08 */ + U16 Reserved2; /*0x0A */ +} MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + *PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + Mpi2RaidOnlineCapacityExpansion_t, + *pMpi2RaidOnlineCapacityExpansion_t; + +/*RAID Compatibility Input Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT { + U16 SourceDevHandle; /*0x00 */ + U16 CandidateDevHandle; /*0x02 */ + U32 Flags; /*0x04 */ + U32 Reserved1; /*0x08 */ + U32 Reserved2; /*0x0C */ +} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, + *PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, + Mpi2RaidCompatibilityInputStruct_t, + *pMpi2RaidCompatibilityInputStruct_t; + +/*defines for RAID Compatibility Structure Flags field */ +#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002) +#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001) + +/*RAID Volume Indicator Structure */ + +typedef struct _MPI2_RAID_VOL_INDICATOR { + U64 TotalBlocks; /*0x00 */ + U64 BlocksRemaining; /*0x08 */ + U32 Flags; /*0x10 */ +} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR, + Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t; + +/*defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) +#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) +#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) +#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) +#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) +#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004) + +/*RAID Compatibility Result Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT { + U8 State; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 GenericAttributes; /*0x04 */ + U32 OEMSpecificAttributes; /*0x08 */ + U32 Reserved3; /*0x0C */ + U32 Reserved4; /*0x10 */ +} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, + *PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, + Mpi2RaidCompatibilityResultStruct_t, + *pMpi2RaidCompatibilityResultStruct_t; + +/*defines for RAID Compatibility Result Structure State field */ +#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00) +#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01) + +/*defines for RAID Compatibility Result Structure GenericAttributes field */ +#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010) + +#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C) +#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008) +#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004) + +#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003) +#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002) +#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001) + +/*RAID Action Reply ActionData union */ +typedef union _MPI2_RAID_ACTION_REPLY_DATA { + U32 Word[5]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; + MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult; +} MPI2_RAID_ACTION_REPLY_DATA, *PTR_MPI2_RAID_ACTION_REPLY_DATA, + Mpi2RaidActionReplyData_t, *pMpi2RaidActionReplyData_t; + +/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for + *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/*RAID Action Reply Message */ +typedef struct _MPI2_RAID_ACTION_REPLY { + U8 Action; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 VolDevHandle; /*0x04 */ + U8 PhysDiskNum; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + MPI2_RAID_ACTION_REPLY_DATA ActionData; /*0x14 */ +} MPI2_RAID_ACTION_REPLY, *PTR_MPI2_RAID_ACTION_REPLY, + Mpi2RaidActionReply_t, *pMpi2RaidActionReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h new file mode 100644 index 0000000..b4e7084a --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2_sas.h Version: 02.00.07 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST + * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. + * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. + * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. + * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA + * Passthrough Request message. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + *Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + +/* + *Values for the SAS DeviceInfo field used in SAS Device Status Change Event + *data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/*SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 RequestDataLength; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U64 SASAddress; /*0x10 */ + U32 Reserved3; /*0x18 */ + U32 Reserved4; /*0x1C */ + MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 ResponseDataLength; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 Reserved3; /*0x14 */ + U8 ResponseData[4]; /*0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +typedef union _MPI2_SATA_PT_SGE_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; /*MPI v2.0 only */ + MPI2_SGE_CHAIN_UNION MpiChain; /*MPI v2.0 only */ + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /*MPI v2.0 only */ + MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /*MPI v2.5 only */ +} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION, + Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t; + +/*SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ + U32 DataLength; /*0x18 */ + U8 CommandFIS[20]; /*0x1C */ + MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/ +} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, + *pMpi2SataPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 StatusFIS[20]; /*0x14 */ + U32 StatusControlRegisters; /*0x28 */ + U32 TransferCount; /*0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t; + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SAS IO Unit Control messages +****************************************************************************/ + +/*SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U8 PhyNum; /*0x0E */ + U8 PrimFlags; /*0x0F */ + U32 Primitive; /*0x10 */ + U8 LookupMethod; /*0x14 */ + U8 Reserved5; /*0x15 */ + U16 SlotNumber; /*0x16 */ + U64 LookupAddress; /*0x18 */ + U32 IOCParameterValue; /*0x20 */ + U32 Reserved7; /*0x24 */ + U32 Reserved8; /*0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, + *pMpi2SasIoUnitControlRequest_t; + +/*values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10) +#define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11) +#define MPI25_SAS_OP_ENABLE_FP_ALL (0x12) +#define MPI25_SAS_OP_DISABLE_FP_ALL (0x13) +#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) +#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/*values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/*values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + +/*SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h new file mode 100644 index 0000000..71453d1 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -0,0 +1,437 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_tool.h + * Title: MPI diagnostic tool structures and definitions + * Creation Date: March 26, 2007 + * + * mpi2_tool.h Version: 02.00.09 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. + * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request + * and reply messages. + * Added MPI2_DIAG_BUF_TYPE_EXTENDED. + * Incremented MPI2_DIAG_BUF_TYPE_COUNT. + * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. + * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer + * Post Request. + * 05-25-11 02.00.07 Added Flags field and related defines to + * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. + * 11-18-11 02.00.08 Incorporating additions for MPI v2.5. + * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request + * message. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TOOL_H +#define MPI2_TOOL_H + +/***************************************************************************** +* +* Toolbox Messages +* +*****************************************************************************/ + +/*defines for the Tools */ +#define MPI2_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) +#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) +#define MPI2_TOOLBOX_BEACON_TOOL (0x05) +#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) + +/**************************************************************************** +* Toolbox reply +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY, + Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t; + +/**************************************************************************** +* Toolbox Clean Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Flags; /*0x0C */ +} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST, + Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t; + +/*values for the Flags field */ +#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) +#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) +#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001) + +/**************************************************************************** +* Toolbox Memory Move request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x0C */ +} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST, + Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t; + +/**************************************************************************** +* Toolbox Diagnostic Data Upload request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 SGLFlags; /*0x0C */ + U8 Reserved5; /*0x0D */ + U16 Reserved6; /*0x0E */ + U32 Flags; /*0x10 */ + U32 DataLength; /*0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x18 */ +} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + *PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + Mpi2ToolboxDiagDataUploadRequest_t, + *pMpi2ToolboxDiagDataUploadRequest_t; + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER { + U32 DiagDataLength; /*00h */ + U8 FormatCode; /*04h */ + U8 Reserved1; /*05h */ + U16 Reserved2; /*06h */ +} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER, + Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t; + +/**************************************************************************** +* Toolbox ISTWI Read Write Tool +****************************************************************************/ + +/*Toolbox ISTWI Read Write Tool request message */ +typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 Reserved6; /*0x10 */ + U8 DevIndex; /*0x14 */ + U8 Action; /*0x15 */ + U8 SGLFlags; /*0x16 */ + U8 Flags; /*0x17 */ + U16 TxDataLength; /*0x18 */ + U16 RxDataLength; /*0x1A */ + U32 Reserved8; /*0x1C */ + U32 Reserved9; /*0x20 */ + U32 Reserved10; /*0x24 */ + U32 Reserved11; /*0x28 */ + U32 Reserved12; /*0x2C */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x30 */ +} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + *PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + Mpi2ToolboxIstwiReadWriteRequest_t, + *pMpi2ToolboxIstwiReadWriteRequest_t; + +/*values for the Action field */ +#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01) +#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02) +#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03) +#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10) +#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11) +#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12) + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*values for the Flags field */ +#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80) +#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07) + +/*Toolbox ISTWI Read Write Tool reply message */ +typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 DevIndex; /*0x14 */ + U8 Action; /*0x15 */ + U8 IstwiStatus; /*0x16 */ + U8 Reserved6; /*0x17 */ + U16 TxDataCount; /*0x18 */ + U16 RxDataCount; /*0x1A */ +} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY, + Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t; + +/**************************************************************************** +* Toolbox Beacon Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_BEACON_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 Reserved5; /*0x0C */ + U8 PhysicalPort; /*0x0D */ + U8 Reserved6; /*0x0E */ + U8 Flags; /*0x0F */ +} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST, + Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t; + +/*values for the Flags field */ +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00) +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) + +/**************************************************************************** +* Toolbox Diagnostic CLI Tool +****************************************************************************/ + +#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C) + +/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 SGLFlags; /*0x0C */ + U8 Reserved5; /*0x0D */ + U16 Reserved6; /*0x0E */ + U32 DataLength; /*0x10 */ + U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /*0x70 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + *PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi2ToolboxDiagnosticCliRequest_t, + *pMpi2ToolboxDiagnosticCliRequest_t; + +/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U32 Reserved5; /*0x0C */ + U32 DataLength; /*0x10 */ + U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */ + MPI25_SGE_IO_UNION SGL; /*0x70 */ +} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + *PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi25ToolboxDiagnosticCliRequest_t, + *pMpi25ToolboxDiagnosticCliRequest_t; + +/*Toolbox Diagnostic CLI Tool reply message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 ReturnedDataLength; /*0x14 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY, + *PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY, + Mpi2ToolboxDiagnosticCliReply_t, + *pMpi2ToolboxDiagnosticCliReply_t; + +/***************************************************************************** +* +* Diagnostic Buffer Messages +* +*****************************************************************************/ + +/**************************************************************************** +* Diagnostic Buffer Post request +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST { + U8 ExtendedType; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U64 BufferAddress; /*0x0C */ + U32 BufferLength; /*0x14 */ + U32 Reserved5; /*0x18 */ + U32 Reserved6; /*0x1C */ + U32 Flags; /*0x20 */ + U32 ProductSpecific[23]; /*0x24 */ +} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST, + Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t; + +/*values for the ExtendedType field */ +#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02) + +/*values for the BufferType field */ +#define MPI2_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02) +/*count of the number of buffer types */ +#define MPI2_DIAG_BUF_TYPE_COUNT (0x03) + +/*values for the Flags field */ +#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002) +#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001) + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REPLY { + U8 ExtendedType; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 TransferLength; /*0x14 */ +} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY, + Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t; + +/**************************************************************************** +* Diagnostic Release request +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REQUEST { + U8 Reserved1; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ +} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST, + Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t; + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REPLY { + U8 Reserved1; /*0x00 */ + U8 BufferType; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY, + Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t; + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h new file mode 100644 index 0000000..516f959 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_type.h + * Title: MPI basic type definitions + * Creation Date: August 16, 2006 + * + * mpi2_type.h Version: 02.00.00 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TYPE_H +#define MPI2_TYPE_H + +/******************************************************************************* + * Define * if it hasn't already been defined. By default + * * is defined to be a near pointer. MPI2_POINTER can be defined as + * a far pointer by defining * as "far *" before this header file is + * included. + */ + +/* the basic types may have already been included by mpi_type.h */ +#ifndef MPI_TYPE_H +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __attribute__ ((aligned(4))); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 *PU8; +typedef U16 *PU16; +typedef U32 *PU32; +typedef U64 *PU64; + +#endif + +#endif diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c new file mode 100644 index 0000000..04f8010 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -0,0 +1,4840 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/time.h> +#include <linux/kthread.h> +#include <linux/aer.h> + + +#include "mpt3sas_base.h" + +static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; + + +#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ + + /* maximum controller queue depth */ +#define MAX_HBA_QUEUE_DEPTH 30000 +#define MAX_CHAIN_DEPTH 100000 +static int max_queue_depth = -1; +module_param(max_queue_depth, int, 0); +MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); + +static int max_sgl_entries = -1; +module_param(max_sgl_entries, int, 0); +MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); + +static int msix_disable = -1; +module_param(msix_disable, int, 0); +MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); + + +static int mpt3sas_fwfault_debug; +MODULE_PARM_DESC(mpt3sas_fwfault_debug, + " enable detection of firmware fault and halt firmware - (default=0)"); + + +/** + * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. + * + */ +static int +_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT3SAS_ADAPTER *ioc; + + if (ret) + return ret; + + pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug); + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) + ioc->fwfault_debug = mpt3sas_fwfault_debug; + return 0; +} +module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, + param_get_int, &mpt3sas_fwfault_debug, 0644); + +/** + * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc + * @arg: input argument, used to derive ioc + * + * Return 0 if controller is removed from pci subsystem. + * Return -1 for other case. + */ +static int mpt3sas_remove_dead_ioc_func(void *arg) +{ + struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg; + struct pci_dev *pdev; + + if ((ioc == NULL)) + return -1; + + pdev = ioc->pdev; + if ((pdev == NULL)) + return -1; + pci_stop_and_remove_bus_device(pdev); + return 0; +} + +/** + * _base_fault_reset_work - workq handling ioc fault conditions + * @work: input argument, used to derive ioc + * Context: sleep. + * + * Return nothing. + */ +static void +_base_fault_reset_work(struct work_struct *work) +{ + struct MPT3SAS_ADAPTER *ioc = + container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work); + unsigned long flags; + u32 doorbell; + int rc; + struct task_struct *p; + + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) + goto rearm_timer; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + doorbell = mpt3sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) { + pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n", + ioc->name); + + /* + * Call _scsih_flush_pending_cmds callback so that we flush all + * pending commands back to OS. This call is required to aovid + * deadlock at block layer. Dead IOC will fail to do diag reset, + * and this call is safe since dead ioc will never return any + * command back from HW. + */ + ioc->schedule_dead_ioc_flush_running_cmds(ioc); + /* + * Set remove_host flag early since kernel thread will + * take some time to execute. + */ + ioc->remove_host = 1; + /*Remove the Dead Host */ + p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc, + "mpt3sas_dead_ioc_%d", ioc->id); + if (IS_ERR(p)) + pr_err(MPT3SAS_FMT + "%s: Running mpt3sas_dead_ioc thread failed !!!!\n", + ioc->name, __func__); + else + pr_err(MPT3SAS_FMT + "%s: Running mpt3sas_dead_ioc thread success !!!!\n", + ioc->name, __func__); + return; /* don't rearm timer */ + } + + if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) { + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name, + __func__, (rc == 0) ? "success" : "failed"); + doorbell = mpt3sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt3sas_base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + if (rc && (doorbell & MPI2_IOC_STATE_MASK) != + MPI2_IOC_STATE_OPERATIONAL) + return; /* don't rearm timer */ + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + rearm_timer: + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +/** + * mpt3sas_base_start_watchdog - start the fault_reset_work_q + * @ioc: per adapter object + * Context: sleep. + * + * Return nothing. + */ +void +mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) +{ + unsigned long flags; + + if (ioc->fault_reset_work_q) + return; + + /* initialize fault polling */ + + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + return; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +/** + * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q + * @ioc: per adapter object + * Context: sleep. + * + * Return nothing. + */ +void +mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (wq) { + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + } +} + +/** + * mpt3sas_base_fault_info - verbose translation of firmware FAULT code + * @ioc: per adapter object + * @fault_code: fault code + * + * Return nothing. + */ +void +mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) +{ + pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n", + ioc->name, fault_code); +} + +/** + * mpt3sas_halt_firmware - halt's mpt controller firmware + * @ioc: per adapter object + * + * For debugging timeout related issues. Writing 0xCOFFEE00 + * to the doorbell register will halt controller firmware. With + * the purpose to stop both driver and firmware, the enduser can + * obtain a ring buffer from controller UART. + */ +void +mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) +{ + u32 doorbell; + + if (!ioc->fwfault_debug) + return; + + dump_stack(); + + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt3sas_base_fault_info(ioc , doorbell); + else { + writel(0xC0FFEE00, &ioc->chip->Doorbell); + pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n", + ioc->name); + } + + if (ioc->fwfault_debug == 2) + for (;;) + ; + else + panic("panic in %s\n", __func__); +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _base_sas_ioc_info - verbose translation of the ioc status + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @request_hdr: request mf + * + * Return nothing. + */ +static void +_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, + MPI2RequestHeader_t *request_hdr) +{ + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + char *desc = NULL; + u16 frame_sz; + char *func_str = NULL; + + /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ + if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) + return; + + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + return; + + switch (ioc_status) { + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc = "invalid function"; + break; + case MPI2_IOCSTATUS_BUSY: + desc = "busy"; + break; + case MPI2_IOCSTATUS_INVALID_SGL: + desc = "invalid sgl"; + break; + case MPI2_IOCSTATUS_INTERNAL_ERROR: + desc = "internal error"; + break; + case MPI2_IOCSTATUS_INVALID_VPID: + desc = "invalid vpid"; + break; + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + desc = "insufficient resources"; + break; + case MPI2_IOCSTATUS_INVALID_FIELD: + desc = "invalid field"; + break; + case MPI2_IOCSTATUS_INVALID_STATE: + desc = "invalid state"; + break; + case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: + desc = "op state not supported"; + break; + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + + case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: + desc = "config invalid action"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: + desc = "config invalid type"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: + desc = "config invalid page"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: + desc = "config invalid data"; + break; + case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: + desc = "config no defaults"; + break; + case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: + desc = "config cant commit"; + break; + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + break; + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc = "eedp app tag error"; + break; + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + + case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: + desc = "target invalid io index"; + break; + case MPI2_IOCSTATUS_TARGET_ABORTED: + desc = "target aborted"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: + desc = "target no conn retryable"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: + desc = "target no connection"; + break; + case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: + desc = "target xfer count mismatch"; + break; + case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: + desc = "target data offset error"; + break; + case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: + desc = "target too much write data"; + break; + case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: + desc = "target iu too short"; + break; + case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: + desc = "target ack nak timeout"; + break; + case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: + desc = "target nak received"; + break; + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + + case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: + desc = "smp request failed"; + break; + case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: + desc = "smp data overrun"; + break; + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + + case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: + desc = "diagnostic released"; + break; + default: + break; + } + + if (!desc) + return; + + switch (request_hdr->Function) { + case MPI2_FUNCTION_CONFIG: + frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; + func_str = "config_page"; + break; + case MPI2_FUNCTION_SCSI_TASK_MGMT: + frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); + func_str = "task_mgmt"; + break; + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); + func_str = "sas_iounit_ctl"; + break; + case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + frame_sz = sizeof(Mpi2SepRequest_t); + func_str = "enclosure"; + break; + case MPI2_FUNCTION_IOC_INIT: + frame_sz = sizeof(Mpi2IOCInitRequest_t); + func_str = "ioc_init"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + frame_sz = sizeof(Mpi2PortEnableRequest_t); + func_str = "port_enable"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; + func_str = "smp_passthru"; + break; + default: + frame_sz = 32; + func_str = "unknown"; + break; + } + + pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n", + ioc->name, desc, ioc_status, request_hdr, func_str); + + _debug_dump_mf(request_hdr, frame_sz/4); +} + +/** + * _base_display_event_data - verbose translation of firmware asyn events + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * + * Return nothing. + */ +static void +_base_display_event_data(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + char *desc = NULL; + u16 event; + + if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) + return; + + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + case MPI2_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI2_EVENT_STATE_CHANGE: + desc = "Status Change"; + break; + case MPI2_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI2_EVENT_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + desc = "Device Status Change"; + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + desc = "IR Operation Status"; + break; + case MPI2_EVENT_SAS_DISCOVERY: + { + Mpi2EventDataSasDiscovery_t *event_data = + (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; + pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + pr_info("discovery_status(0x%08x)", + le32_to_cpu(event_data->DiscoveryStatus)); + pr_info("\n"); + return; + } + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + desc = "SAS Enclosure Device Status Change"; + break; + case MPI2_EVENT_IR_VOLUME: + desc = "IR Volume"; + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + desc = "IR Physical Disk"; + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + desc = "IR Configuration Change List"; + break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + desc = "Log Entry Added"; + break; + } + + if (!desc) + return; + + pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc); +} +#endif + +/** + * _base_sas_log_info - verbose translation of firmware log info + * @ioc: per adapter object + * @log_info: log info + * + * Return nothing. + */ +static void +_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) +{ + union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + } dw; + }; + union loginfo_type sas_loginfo; + char *originator_str = NULL; + + sas_loginfo.loginfo = log_info; + if (sas_loginfo.dw.bus_type != 3 /*SAS*/) + return; + + /* each nexus loss loginfo */ + if (log_info == 0x31170000) + return; + + /* eat the loginfos associated with task aborts */ + if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == + 0x31140000 || log_info == 0x31130000)) + return; + + switch (sas_loginfo.dw.originator) { + case 0: + originator_str = "IOP"; + break; + case 1: + originator_str = "PL"; + break; + case 2: + originator_str = "IR"; + break; + } + + pr_warn(MPT3SAS_FMT + "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n", + ioc->name, log_info, + originator_str, sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + +/** + * _base_display_reply_info - + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + u32 loginfo = 0; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (unlikely(!mpi_reply)) { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && + (ioc->logging_level & MPT_DEBUG_REPLY)) { + _base_sas_ioc_info(ioc , mpi_reply, + mpt3sas_base_get_msg_frame(ioc, smid)); + } +#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { + loginfo = le32_to_cpu(mpi_reply->IOCLogInfo); + _base_sas_log_info(ioc, loginfo); + } + + if (ioc_status || loginfo) { + ioc_status &= MPI2_IOCSTATUS_MASK; + mpt3sas_trigger_mpi(ioc, ioc_status, loginfo); + } +} + +/** + * mpt3sas_base_done - base internal command completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return 1; + + if (ioc->base_cmds.status == MPT3_CMD_NOT_USED) + return 1; + + ioc->base_cmds.status |= MPT3_CMD_COMPLETE; + if (mpi_reply) { + ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID; + memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + } + ioc->base_cmds.status &= ~MPT3_CMD_PENDING; + + complete(&ioc->base_cmds.done); + return 1; +} + +/** + * _base_async_event - main callback handler for firmware asyn events + * @ioc: per adapter object + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + Mpi2EventAckRequest_t *ack_request; + u16 smid; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return 1; + if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) + return 1; +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); +#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) + goto out; + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + + ack_request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); + ack_request->Function = MPI2_FUNCTION_EVENT_ACK; + ack_request->Event = mpi_reply->Event; + ack_request->EventContext = mpi_reply->EventContext; + ack_request->VF_ID = 0; /* TODO */ + ack_request->VP_ID = 0; + mpt3sas_base_put_smid_default(ioc, smid); + + out: + + /* scsih callback handler */ + mpt3sas_scsih_event_callback(ioc, msix_index, reply); + + /* ctl callback handler */ + mpt3sas_ctl_event_callback(ioc, msix_index, reply); + + return 1; +} + +/** + * _base_get_cb_idx - obtain the callback index + * @ioc: per adapter object + * @smid: system request message index + * + * Return callback index. + */ +static u8 +_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + int i; + u8 cb_idx; + + if (smid < ioc->hi_priority_smid) { + i = smid - 1; + cb_idx = ioc->scsi_lookup[i].cb_idx; + } else if (smid < ioc->internal_smid) { + i = smid - ioc->hi_priority_smid; + cb_idx = ioc->hpr_lookup[i].cb_idx; + } else if (smid <= ioc->hba_queue_depth) { + i = smid - ioc->internal_smid; + cb_idx = ioc->internal_lookup[i].cb_idx; + } else + cb_idx = 0xFF; + return cb_idx; +} + +/** + * _base_mask_interrupts - disable interrupts + * @ioc: per adapter object + * + * Disabling ResetIRQ, Reply and Doorbell Interrupts + * + * Return nothing. + */ +static void +_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc) +{ + u32 him_register; + + ioc->mask_interrupts = 1; + him_register = readl(&ioc->chip->HostInterruptMask); + him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; + writel(him_register, &ioc->chip->HostInterruptMask); + readl(&ioc->chip->HostInterruptMask); +} + +/** + * _base_unmask_interrupts - enable interrupts + * @ioc: per adapter object + * + * Enabling only Reply Interrupts + * + * Return nothing. + */ +static void +_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc) +{ + u32 him_register; + + him_register = readl(&ioc->chip->HostInterruptMask); + him_register &= ~MPI2_HIM_RIM; + writel(him_register, &ioc->chip->HostInterruptMask); + ioc->mask_interrupts = 0; +} + +union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; +}; + +/** + * _base_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * Return IRQ_HANDLE if processed, else IRQ_NONE. + */ +static irqreturn_t +_base_interrupt(int irq, void *bus_id) +{ + struct adapter_reply_queue *reply_q = bus_id; + union reply_descriptor rd; + u32 completed_cmds; + u8 request_desript_type; + u16 smid; + u8 cb_idx; + u32 reply; + u8 msix_index = reply_q->msix_index; + struct MPT3SAS_ADAPTER *ioc = reply_q->ioc; + Mpi2ReplyDescriptorsUnion_t *rpf; + u8 rc; + + if (ioc->mask_interrupts) + return IRQ_NONE; + + if (!atomic_add_unless(&reply_q->busy, 1, 1)) + return IRQ_NONE; + + rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index]; + request_desript_type = rpf->Default.ReplyFlags + & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) { + atomic_dec(&reply_q->busy); + return IRQ_NONE; + } + + completed_cmds = 0; + cb_idx = 0xFF; + do { + rd.word = le64_to_cpu(rpf->Words); + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) + goto out; + reply = 0; + smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1); + if (request_desript_type == + MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS || + request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) { + cb_idx = _base_get_cb_idx(ioc, smid); + if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && + (likely(mpt_callbacks[cb_idx] != NULL))) { + rc = mpt_callbacks[cb_idx](ioc, smid, + msix_index, 0); + if (rc) + mpt3sas_base_free_smid(ioc, smid); + } + } else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { + reply = le32_to_cpu( + rpf->AddressReply.ReplyFrameAddress); + if (reply > ioc->reply_dma_max_address || + reply < ioc->reply_dma_min_address) + reply = 0; + if (smid) { + cb_idx = _base_get_cb_idx(ioc, smid); + if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && + (likely(mpt_callbacks[cb_idx] != NULL))) { + rc = mpt_callbacks[cb_idx](ioc, smid, + msix_index, reply); + if (reply) + _base_display_reply_info(ioc, + smid, msix_index, reply); + if (rc) + mpt3sas_base_free_smid(ioc, + smid); + } + } else { + _base_async_event(ioc, msix_index, reply); + } + + /* reply free queue handling */ + if (reply) { + ioc->reply_free_host_index = + (ioc->reply_free_host_index == + (ioc->reply_free_queue_depth - 1)) ? + 0 : ioc->reply_free_host_index + 1; + ioc->reply_free[ioc->reply_free_host_index] = + cpu_to_le32(reply); + wmb(); + writel(ioc->reply_free_host_index, + &ioc->chip->ReplyFreeHostIndex); + } + } + + rpf->Words = cpu_to_le64(ULLONG_MAX); + reply_q->reply_post_host_index = + (reply_q->reply_post_host_index == + (ioc->reply_post_queue_depth - 1)) ? 0 : + reply_q->reply_post_host_index + 1; + request_desript_type = + reply_q->reply_post_free[reply_q->reply_post_host_index]. + Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + completed_cmds++; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + goto out; + if (!reply_q->reply_post_host_index) + rpf = reply_q->reply_post_free; + else + rpf++; + } while (1); + + out: + + if (!completed_cmds) { + atomic_dec(&reply_q->busy); + return IRQ_NONE; + } + + wmb(); + writel(reply_q->reply_post_host_index | (msix_index << + MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); + atomic_dec(&reply_q->busy); + return IRQ_HANDLED; +} + +/** + * _base_is_controller_msix_enabled - is controller support muli-reply queues + * @ioc: per adapter object + * + */ +static inline int +_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc) +{ + return (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable; +} + +/** + * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues + * @ioc: per adapter object + * Context: ISR conext + * + * Called when a Task Management request has completed. We want + * to flush the other reply queues so all the outstanding IO has been + * completed back to OS before we process the TM completetion. + * + * Return nothing. + */ +void +mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q; + + /* If MSIX capability is turned off + * then multi-queues are not enabled + */ + if (!_base_is_controller_msix_enabled(ioc)) + return; + + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + if (ioc->shost_recovery) + return; + /* TMs are on msix_index == 0 */ + if (reply_q->msix_index == 0) + continue; + _base_interrupt(reply_q->vector, (void *)reply_q); + } +} + +/** + * mpt3sas_base_release_callback_handler - clear interrupt callback handler + * @cb_idx: callback index + * + * Return nothing. + */ +void +mpt3sas_base_release_callback_handler(u8 cb_idx) +{ + mpt_callbacks[cb_idx] = NULL; +} + +/** + * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler + * @cb_func: callback function + * + * Returns cb_func. + */ +u8 +mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func) +{ + u8 cb_idx; + + for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) + if (mpt_callbacks[cb_idx] == NULL) + break; + + mpt_callbacks[cb_idx] = cb_func; + return cb_idx; +} + +/** + * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler + * + * Return nothing. + */ +void +mpt3sas_base_initialize_callback_handler(void) +{ + u8 cb_idx; + + for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) + mpt3sas_base_release_callback_handler(cb_idx); +} + + +/** + * _base_build_zero_len_sge - build zero length sg entry + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +static void +_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr) +{ + u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | + MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << + MPI2_SGE_FLAGS_SHIFT); + ioc->base_add_sg_single(paddr, flags_length, -1); +} + +/** + * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple32_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le32(dma_addr); +} + + +/** + * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple64_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le64(dma_addr); +} + +/** + * _base_get_chain_buffer_tracker - obtain chain tracker + * @ioc: per adapter object + * @smid: smid associated to an IO request + * + * Returns chain tracker(from ioc->free_chain_list) + */ +static struct chain_tracker * +_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + struct chain_tracker *chain_req; + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_chain_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "chain buffers not available\n", ioc->name)); + return NULL; + } + chain_req = list_entry(ioc->free_chain_list.next, + struct chain_tracker, tracker_list); + list_del_init(&chain_req->tracker_list); + list_add_tail(&chain_req->tracker_list, + &ioc->scsi_lookup[smid - 1].chain_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return chain_req; +} + + +/** + * _base_build_sg - build generic sg + * @ioc: per adapter object + * @psge: virtual address for SGE + * @data_out_dma: physical address for WRITES + * @data_out_sz: data xfer size for WRITES + * @data_in_dma: physical address for READS + * @data_in_sz: data xfer size for READS + * + * Return nothing. + */ +static void +_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, + dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, + size_t data_in_sz) +{ + u32 sgl_flags; + + if (!data_out_sz && !data_in_sz) { + _base_build_zero_len_sge(ioc, psge); + return; + } + + if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } +} + +/* IEEE format sgls */ + +/** + * _base_add_sg_single_ieee - add sg element for IEEE format + * @paddr: virtual address for SGE + * @flags: SGE flags + * @chain_offset: number of 128 byte elements from start of segment + * @length: data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length, + dma_addr_t dma_addr) +{ + Mpi25IeeeSgeChain64_t *sgel = paddr; + + sgel->Flags = flags; + sgel->NextChainOffset = chain_offset; + sgel->Length = cpu_to_le32(length); + sgel->Address = cpu_to_le64(dma_addr); +} + +/** + * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +static void +_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr) +{ + u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST); + _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1); +} + +/** + * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + int sges_left; + u32 sges_in_segment; + u8 simple_sgl_flags; + u8 simple_sgl_flags_last; + u8 chain_sgl_flags; + struct chain_tracker *chain_req; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + simple_sgl_flags_last = simple_sgl_flags | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST; + chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (!sges_left) { + sdev_printk(KERN_ERR, scmd->device, + "pci_map_sg failed: request for %d bytes!\n", + scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = (ioc->request_sz - + offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) + + (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee); + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment > 1) { + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : sges_in_segment; + chain_length = sges_in_segment * ioc->sge_size_ieee; + if (chain_offset) + chain_length += ioc->sge_size_ieee; + _base_add_sg_single_ieee(sg_local, chain_sgl_flags, + chain_offset, chain_length, chain_dma); + + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + sges_in_segment--; + } + + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + _base_add_sg_single_ieee(sg_local, + simple_sgl_flags_last, 0, sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + } + + return 0; +} + +/** + * _base_build_sg_ieee - build generic sg for IEEE format + * @ioc: per adapter object + * @psge: virtual address for SGE + * @data_out_dma: physical address for WRITES + * @data_out_sz: data xfer size for WRITES + * @data_in_dma: physical address for READS + * @data_in_sz: data xfer size for READS + * + * Return nothing. + */ +static void +_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge, + dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, + size_t data_in_sz) +{ + u8 sgl_flags; + + if (!data_out_sz && !data_in_sz) { + _base_build_zero_len_sge_ieee(ioc, psge); + return; + } + + if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, + data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size_ieee; + + /* READ sgel last */ + sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, + data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, + data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, + data_in_dma); + } +} + +#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) + +/** + * _base_config_dma_addressing - set dma addressing + * @ioc: per adapter object + * @pdev: PCI device struct + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) +{ + struct sysinfo s; + char *desc = NULL; + + if (sizeof(dma_addr_t) > 4) { + const uint64_t required_mask = + dma_get_required_mask(&pdev->dev); + if ((required_mask > DMA_BIT_MASK(32)) && + !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && + !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { + ioc->base_add_sg_single = &_base_add_sg_single_64; + ioc->sge_size = sizeof(Mpi2SGESimple64_t); + desc = "64"; + goto out; + } + } + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + ioc->base_add_sg_single = &_base_add_sg_single_32; + ioc->sge_size = sizeof(Mpi2SGESimple32_t); + desc = "32"; + } else + return -ENODEV; + + out: + si_meminfo(&s); + pr_info(MPT3SAS_FMT + "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", + ioc->name, desc, convert_to_kb(s.totalram)); + + return 0; +} + +/** + * _base_check_enable_msix - checks MSIX capabable. + * @ioc: per adapter object + * + * Check to see if card is capable of MSIX, and set number + * of available msix vectors + */ +static int +_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + int base; + u16 message_control; + + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); + if (!base) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n", + ioc->name)); + return -EINVAL; + } + + /* get msix vector count */ + + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + if (ioc->msix_vector_count > 8) + ioc->msix_vector_count = 8; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "msix is supported, vector_count(%d)\n", + ioc->name, ioc->msix_vector_count)); + return 0; +} + +/** + * _base_free_irq - free irq + * @ioc: per adapter object + * + * Freeing respective reply_queue from the list. + */ +static void +_base_free_irq(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q, *next; + + if (list_empty(&ioc->reply_queue_list)) + return; + + list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { + list_del(&reply_q->list); + synchronize_irq(reply_q->vector); + free_irq(reply_q->vector, reply_q); + kfree(reply_q); + } +} + +/** + * _base_request_irq - request irq + * @ioc: per adapter object + * @index: msix index into vector table + * @vector: irq vector + * + * Inserting respective reply_queue into the list. + */ +static int +_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector) +{ + struct adapter_reply_queue *reply_q; + int r; + + reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); + if (!reply_q) { + pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n", + ioc->name, (int)sizeof(struct adapter_reply_queue)); + return -ENOMEM; + } + reply_q->ioc = ioc; + reply_q->msix_index = index; + reply_q->vector = vector; + atomic_set(&reply_q->busy, 0); + if (ioc->msix_enable) + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", + MPT3SAS_DRIVER_NAME, ioc->id, index); + else + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d", + MPT3SAS_DRIVER_NAME, ioc->id); + r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name, + reply_q); + if (r) { + pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n", + reply_q->name, vector); + kfree(reply_q); + return -EBUSY; + } + + INIT_LIST_HEAD(&reply_q->list); + list_add_tail(&reply_q->list, &ioc->reply_queue_list); + return 0; +} + +/** + * _base_assign_reply_queues - assigning msix index for each cpu + * @ioc: per adapter object + * + * The enduser would need to set the affinity via /proc/irq/#/smp_affinity + * + * It would nice if we could call irq_set_affinity, however it is not + * an exported symbol + */ +static void +_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q; + int cpu_id; + int cpu_grouping, loop, grouping, grouping_mod; + int reply_queue; + + if (!_base_is_controller_msix_enabled(ioc)) + return; + + memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz); + + /* NUMA Hardware bug workaround - drop to less reply queues */ + if (ioc->reply_queue_count > ioc->facts.MaxMSIxVectors) { + ioc->reply_queue_count = ioc->facts.MaxMSIxVectors; + reply_queue = 0; + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + reply_q->msix_index = reply_queue; + if (++reply_queue == ioc->reply_queue_count) + reply_queue = 0; + } + } + + /* when there are more cpus than available msix vectors, + * then group cpus togeather on same irq + */ + if (ioc->cpu_count > ioc->msix_vector_count) { + grouping = ioc->cpu_count / ioc->msix_vector_count; + grouping_mod = ioc->cpu_count % ioc->msix_vector_count; + if (grouping < 2 || (grouping == 2 && !grouping_mod)) + cpu_grouping = 2; + else if (grouping < 4 || (grouping == 4 && !grouping_mod)) + cpu_grouping = 4; + else if (grouping < 8 || (grouping == 8 && !grouping_mod)) + cpu_grouping = 8; + else + cpu_grouping = 16; + } else + cpu_grouping = 0; + + loop = 0; + reply_q = list_entry(ioc->reply_queue_list.next, + struct adapter_reply_queue, list); + for_each_online_cpu(cpu_id) { + if (!cpu_grouping) { + ioc->cpu_msix_table[cpu_id] = reply_q->msix_index; + reply_q = list_entry(reply_q->list.next, + struct adapter_reply_queue, list); + } else { + if (loop < cpu_grouping) { + ioc->cpu_msix_table[cpu_id] = + reply_q->msix_index; + loop++; + } else { + reply_q = list_entry(reply_q->list.next, + struct adapter_reply_queue, list); + ioc->cpu_msix_table[cpu_id] = + reply_q->msix_index; + loop = 1; + } + } + } +} + +/** + * _base_disable_msix - disables msix + * @ioc: per adapter object + * + */ +static void +_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + if (!ioc->msix_enable) + return; + pci_disable_msix(ioc->pdev); + ioc->msix_enable = 0; +} + +/** + * _base_enable_msix - enables msix, failback to io_apic + * @ioc: per adapter object + * + */ +static int +_base_enable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + struct msix_entry *entries, *a; + int r; + int i; + u8 try_msix = 0; + + INIT_LIST_HEAD(&ioc->reply_queue_list); + + if (msix_disable == -1 || msix_disable == 0) + try_msix = 1; + + if (!try_msix) + goto try_ioapic; + + if (_base_check_enable_msix(ioc) != 0) + goto try_ioapic; + + ioc->reply_queue_count = min_t(int, ioc->cpu_count, + ioc->msix_vector_count); + + entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry), + GFP_KERNEL); + if (!entries) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "kcalloc failed @ at %s:%d/%s() !!!\n", + ioc->name, __FILE__, __LINE__, __func__)); + goto try_ioapic; + } + + for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) + a->entry = i; + + r = pci_enable_msix(ioc->pdev, entries, ioc->reply_queue_count); + if (r) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "pci_enable_msix failed (r=%d) !!!\n", + ioc->name, r)); + kfree(entries); + goto try_ioapic; + } + + ioc->msix_enable = 1; + for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) { + r = _base_request_irq(ioc, i, a->vector); + if (r) { + _base_free_irq(ioc); + _base_disable_msix(ioc); + kfree(entries); + goto try_ioapic; + } + } + + kfree(entries); + return 0; + +/* failback to io_apic interrupt routing */ + try_ioapic: + + r = _base_request_irq(ioc, 0, ioc->pdev->irq); + + return r; +} + +/** + * mpt3sas_base_map_resources - map in controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + u32 memap_sz; + u32 pio_sz; + int i, r = 0; + u64 pio_chip = 0; + u64 chip_phys = 0; + struct adapter_reply_queue *reply_q; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", + ioc->name, __func__)); + + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n", + ioc->name); + return -ENODEV; + } + + + if (pci_request_selected_regions(pdev, ioc->bars, + MPT3SAS_DRIVER_NAME)) { + pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n", + ioc->name); + r = -ENODEV; + goto out_fail; + } + +/* AER (Advanced Error Reporting) hooks */ + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + + if (_base_config_dma_addressing(ioc, pdev) != 0) { + pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + r = -ENODEV; + goto out_fail; + } + + for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { + if (pio_sz) + continue; + pio_chip = (u64)pci_resource_start(pdev, i); + pio_sz = pci_resource_len(pdev, i); + } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { + if (memap_sz) + continue; + ioc->chip_phys = pci_resource_start(pdev, i); + chip_phys = (u64)ioc->chip_phys; + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + pr_err(MPT3SAS_FMT "unable to map adapter memory!\n", + ioc->name); + r = -EINVAL; + goto out_fail; + } + } + } + + _base_mask_interrupts(ioc); + r = _base_enable_msix(ioc); + if (r) + goto out_fail; + + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) + pr_info(MPT3SAS_FMT "%s: IRQ %d\n", + reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : + "IO-APIC enabled"), reply_q->vector); + + pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n", + ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz); + pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n", + ioc->name, (unsigned long long)pio_chip, pio_sz); + + /* Save PCI configuration state for recovery from PCI AER/EEH errors */ + pci_save_state(pdev); + return 0; + + out_fail: + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + return r; +} + +/** + * mpt3sas_base_get_msg_frame - obtain request mf pointer + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns virt pointer to message frame. + */ +void * +mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->request + (smid * ioc->request_sz)); +} + +/** + * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to sense buffer. + */ +void * +mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to the low 32bit address of the sense buffer. + */ +__le32 +mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return cpu_to_le32(ioc->sense_dma + ((smid - 1) * + SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address + * @ioc: per adapter object + * @phys_addr: lower 32 physical addr of the reply + * + * Converts 32bit lower physical addr into a virt address. + */ +void * +mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) +{ + if (!phys_addr) + return NULL; + return ioc->reply + (phys_addr - (u32)ioc->reply_dma); +} + +/** + * mpt3sas_base_get_smid - obtain a free smid from internal queue + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->internal_free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + pr_err(MPT3SAS_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->internal_free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue + * @ioc: per adapter object + * @cb_idx: callback index + * @scmd: pointer to scsi command object + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, + struct scsi_cmnd *scmd) +{ + unsigned long flags; + struct scsiio_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + pr_err(MPT3SAS_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->free_list.next, + struct scsiio_tracker, tracker_list); + request->scmd = scmd; + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->hpr_free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return 0; + } + + request = list_entry(ioc->hpr_free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_free_smid - put smid back on free_list + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + int i; + struct chain_tracker *chain_req, *next; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (smid < ioc->hi_priority_smid) { + /* scsiio queue */ + i = smid - 1; + if (!list_empty(&ioc->scsi_lookup[i].chain_list)) { + list_for_each_entry_safe(chain_req, next, + &ioc->scsi_lookup[i].chain_list, tracker_list) { + list_del_init(&chain_req->tracker_list); + list_add(&chain_req->tracker_list, + &ioc->free_chain_list); + } + } + ioc->scsi_lookup[i].cb_idx = 0xFF; + ioc->scsi_lookup[i].scmd = NULL; + list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* + * See _wait_for_commands_to_complete() call with regards + * to this code. + */ + if (ioc->shost_recovery && ioc->pending_io_count) { + if (ioc->pending_io_count == 1) + wake_up(&ioc->reset_wq); + ioc->pending_io_count--; + } + return; + } else if (smid < ioc->internal_smid) { + /* hi-priority */ + i = smid - ioc->hi_priority_smid; + ioc->hpr_lookup[i].cb_idx = 0xFF; + list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list); + } else if (smid <= ioc->hba_queue_depth) { + /* internal queue */ + i = smid - ioc->internal_smid; + ioc->internal_lookup[i].cb_idx = 0xFF; + list_add(&ioc->internal_lookup[i].tracker_list, + &ioc->internal_free_list); + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); +} + +/** + * _base_writeq - 64 bit write to MMIO + * @ioc: per adapter object + * @b: data payload + * @addr: address in MMIO space + * @writeq_lock: spin lock + * + * Glue for handling an atomic 64 bit word to MMIO. This special handling takes + * care of 32 bit environment where its not quarenteed to send the entire word + * in one transfer. + */ +#if defined(writeq) && defined(CONFIG_64BIT) +static inline void +_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) +{ + writeq(cpu_to_le64(b), addr); +} +#else +static inline void +_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) +{ + unsigned long flags; + __u64 data_out = cpu_to_le64(b); + + spin_lock_irqsave(writeq_lock, flags); + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(writeq_lock, flags); +} +#endif + +static inline u8 +_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc) +{ + return ioc->cpu_msix_table[raw_smp_processor_id()]; +} + +/** + * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_fast_path - send fast path request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.SCSIIO.RequestFlags = + MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; + descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.HighPriority.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.HighPriority.MSIxIndex = 0; + descriptor.HighPriority.SMID = cpu_to_le16(smid); + descriptor.HighPriority.LMID = 0; + descriptor.HighPriority.Reserved1 = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_default - Default, primarily used for config pages + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.Default.MSIxIndex = _base_get_msix_index(ioc); + descriptor.Default.SMID = cpu_to_le16(smid); + descriptor.Default.LMID = 0; + descriptor.Default.DescriptorTypeDependent = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + + + +/** + * _base_display_ioc_capabilities - Disply IOC's capabilities. + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) +{ + int i = 0; + char desc[16]; + u32 iounit_pg1_flags; + u32 bios_version; + + bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + strncpy(desc, ioc->manu_pg0.ChipName, 16); + pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\ + "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", + ioc->name, desc, + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF, + ioc->pdev->revision, + (bios_version & 0xFF000000) >> 24, + (bios_version & 0x00FF0000) >> 16, + (bios_version & 0x0000FF00) >> 8, + bios_version & 0x000000FF); + + pr_info(MPT3SAS_FMT "Protocol=(", ioc->name); + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { + pr_info("Initiator"); + i++; + } + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { + pr_info("%sTarget", i ? "," : ""); + i++; + } + + i = 0; + pr_info("), "); + pr_info("Capabilities=("); + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { + pr_info("Raid"); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { + pr_info("%sTLR", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { + pr_info("%sMulticast", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { + pr_info("%sBIDI Target", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { + pr_info("%sEEDP", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { + pr_info("%sSnapshot Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { + pr_info("%sDiag Trace Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) { + pr_info("%sDiag Extended Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { + pr_info("%sTask Set Full", i ? "," : ""); + i++; + } + + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { + pr_info("%sNCQ", i ? "," : ""); + i++; + } + + pr_info(")\n"); +} + +/** + * mpt3sas_base_update_missing_delay - change the missing delay timers + * @ioc: per adapter object + * @device_missing_delay: amount of time till device is reported missing + * @io_missing_delay: interval IO is returned when there is a missing device + * + * Return nothing. + * + * Passed on the command line, this function will modify the device missing + * delay, as well as the io missing delay. This should be called at driver + * load time. + */ +void +mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, + u16 device_missing_delay, u8 io_missing_delay) +{ + u16 dmd, dmd_new, dmd_orignal; + u8 io_missing_delay_original; + u16 sz; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2ConfigReply_t mpi_reply; + u8 num_phys = 0; + u16 ioc_status; + + mpt3sas_config_get_number_hba_phys(ioc, &num_phys); + if (!num_phys) + return; + + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* device missing delay */ + dmd = sas_iounit_pg1->ReportDeviceMissingDelay; + if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + dmd_orignal = dmd; + if (device_missing_delay > 0x7F) { + dmd = (device_missing_delay > 0x7F0) ? 0x7F0 : + device_missing_delay; + dmd = dmd / 16; + dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16; + } else + dmd = device_missing_delay; + sas_iounit_pg1->ReportDeviceMissingDelay = dmd; + + /* io missing delay */ + io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay; + sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay; + + if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, + sz)) { + if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + dmd_new = (dmd & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + dmd_new = + dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n", + ioc->name, dmd_orignal, dmd_new); + pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n", + ioc->name, io_missing_delay_original, + io_missing_delay); + ioc->device_missing_delay = dmd_new; + ioc->io_missing_delay = io_missing_delay; + } + +out: + kfree(sas_iounit_pg1); +} +/** + * _base_static_config_pages - static start of day config pages + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + u32 iounit_pg1_flags; + + mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); + if (ioc->ir_firmware) + mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, + &ioc->manu_pg10); + + /* + * Ensure correct T10 PI operation if vendor left EEDPTagMode + * flag unset in NVDATA. + */ + mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); + if (ioc->manu_pg11.EEDPTagMode == 0) { + pr_err("%s: overriding NVDATA EEDPTagMode setting\n", + ioc->name); + ioc->manu_pg11.EEDPTagMode &= ~0x3; + ioc->manu_pg11.EEDPTagMode |= 0x1; + mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply, + &ioc->manu_pg11); + } + + mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + _base_display_ioc_capabilities(ioc); + + /* + * Enable task_set_full handling in iounit_pg1 when the + * facts capabilities indicate that its supported. + */ + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) + iounit_pg1_flags &= + ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + else + iounit_pg1_flags |= + MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); + mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); +} + +/** + * _base_release_memory_pools - release memory + * @ioc: per adapter object + * + * Free memory allocated from _base_allocate_memory_pools. + * + * Return nothing. + */ +static void +_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) +{ + int i; + + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->request) { + pci_free_consistent(ioc->pdev, ioc->request_dma_sz, + ioc->request, ioc->request_dma); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "request_pool(0x%p): free\n", + ioc->name, ioc->request)); + ioc->request = NULL; + } + + if (ioc->sense) { + pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); + if (ioc->sense_dma_pool) + pci_pool_destroy(ioc->sense_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "sense_pool(0x%p): free\n", + ioc->name, ioc->sense)); + ioc->sense = NULL; + } + + if (ioc->reply) { + pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); + if (ioc->reply_dma_pool) + pci_pool_destroy(ioc->reply_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_pool(0x%p): free\n", + ioc->name, ioc->reply)); + ioc->reply = NULL; + } + + if (ioc->reply_free) { + pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, + ioc->reply_free_dma); + if (ioc->reply_free_dma_pool) + pci_pool_destroy(ioc->reply_free_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_free_pool(0x%p): free\n", + ioc->name, ioc->reply_free)); + ioc->reply_free = NULL; + } + + if (ioc->reply_post_free) { + pci_pool_free(ioc->reply_post_free_dma_pool, + ioc->reply_post_free, ioc->reply_post_free_dma); + if (ioc->reply_post_free_dma_pool) + pci_pool_destroy(ioc->reply_post_free_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_post_free_pool(0x%p): free\n", ioc->name, + ioc->reply_post_free)); + ioc->reply_post_free = NULL; + } + + if (ioc->config_page) { + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "config_page(0x%p): free\n", ioc->name, + ioc->config_page)); + pci_free_consistent(ioc->pdev, ioc->config_page_sz, + ioc->config_page, ioc->config_page_dma); + } + + if (ioc->scsi_lookup) { + free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); + ioc->scsi_lookup = NULL; + } + kfree(ioc->hpr_lookup); + kfree(ioc->internal_lookup); + if (ioc->chain_lookup) { + for (i = 0; i < ioc->chain_depth; i++) { + if (ioc->chain_lookup[i].chain_buffer) + pci_pool_free(ioc->chain_dma_pool, + ioc->chain_lookup[i].chain_buffer, + ioc->chain_lookup[i].chain_buffer_dma); + } + if (ioc->chain_dma_pool) + pci_pool_destroy(ioc->chain_dma_pool); + free_pages((ulong)ioc->chain_lookup, ioc->chain_pages); + ioc->chain_lookup = NULL; + } +} + +/** + * _base_allocate_memory_pools - allocate start of day memory pools + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 success, anything else error + */ +static int +_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + struct mpt3sas_facts *facts; + u16 max_sge_elements; + u16 chains_needed_per_io; + u32 sz, total_sz, reply_post_free_sz; + u32 retry_sz; + u16 max_request_credit; + unsigned short sg_tablesize; + u16 sge_size; + int i; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + + retry_sz = 0; + facts = &ioc->facts; + + /* command line tunables for max sgl entries */ + if (max_sgl_entries != -1) + sg_tablesize = max_sgl_entries; + else + sg_tablesize = MPT3SAS_SG_DEPTH; + + if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS) + sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS; + else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) + sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS; + ioc->shost->sg_tablesize = sg_tablesize; + + ioc->hi_priority_depth = facts->HighPriorityCredit; + ioc->internal_depth = ioc->hi_priority_depth + (5); + /* command line tunables for max controller queue depth */ + if (max_queue_depth != -1 && max_queue_depth != 0) { + max_request_credit = min_t(u16, max_queue_depth + + ioc->hi_priority_depth + ioc->internal_depth, + facts->RequestCredit); + if (max_request_credit > MAX_HBA_QUEUE_DEPTH) + max_request_credit = MAX_HBA_QUEUE_DEPTH; + } else + max_request_credit = min_t(u16, facts->RequestCredit, + MAX_HBA_QUEUE_DEPTH); + + ioc->hba_queue_depth = max_request_credit; + + /* request frame size */ + ioc->request_sz = facts->IOCRequestFrameSize * 4; + + /* reply frame size */ + ioc->reply_sz = facts->ReplyFrameSize * 4; + + /* calculate the max scatter element size */ + sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee); + + retry_allocation: + total_sz = 0; + /* calculate number of sg elements left over in the 1st frame */ + max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - + sizeof(Mpi2SGEIOUnion_t)) + sge_size); + ioc->max_sges_in_main_message = max_sge_elements/sge_size; + + /* now do the same for a chain buffer */ + max_sge_elements = ioc->request_sz - sge_size; + ioc->max_sges_in_chain_message = max_sge_elements/sge_size; + + /* + * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE + */ + chains_needed_per_io = ((ioc->shost->sg_tablesize - + ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) + + 1; + if (chains_needed_per_io > facts->MaxChainDepth) { + chains_needed_per_io = facts->MaxChainDepth; + ioc->shost->sg_tablesize = min_t(u16, + ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message + * chains_needed_per_io), ioc->shost->sg_tablesize); + } + ioc->chains_needed_per_io = chains_needed_per_io; + + /* reply free queue sizing - taking into account for 64 FW events */ + ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; + + /* calculate reply descriptor post queue depth */ + ioc->reply_post_queue_depth = ioc->hba_queue_depth + + ioc->reply_free_queue_depth + 1 ; + /* align the reply post queue on the next 16 count boundary */ + if (ioc->reply_post_queue_depth % 16) + ioc->reply_post_queue_depth += 16 - + (ioc->reply_post_queue_depth % 16); + + + if (ioc->reply_post_queue_depth > + facts->MaxReplyDescriptorPostQueueDepth) { + ioc->reply_post_queue_depth = + facts->MaxReplyDescriptorPostQueueDepth - + (facts->MaxReplyDescriptorPostQueueDepth % 16); + ioc->hba_queue_depth = + ((ioc->reply_post_queue_depth - 64) / 2) - 1; + ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; + } + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \ + "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " + "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, + ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, + ioc->chains_needed_per_io)); + + ioc->scsiio_depth = ioc->hba_queue_depth - + ioc->hi_priority_depth - ioc->internal_depth; + + /* set the scsi host can_queue depth + * with some internal commands that could be outstanding + */ + ioc->shost->can_queue = ioc->scsiio_depth; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "scsi host: can_queue depth (%d)\n", + ioc->name, ioc->shost->can_queue)); + + + /* contiguous pool for request and chains, 16 byte align, one extra " + * "frame for smid=0 + */ + ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth; + sz = ((ioc->scsiio_depth + 1) * ioc->request_sz); + + /* hi-priority queue */ + sz += (ioc->hi_priority_depth * ioc->request_sz); + + /* internal queue */ + sz += (ioc->internal_depth * ioc->request_sz); + + ioc->request_dma_sz = sz; + ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); + if (!ioc->request) { + pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ + "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kB)\n", ioc->name, ioc->hba_queue_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH) + goto out; + retry_sz += 64; + ioc->hba_queue_depth = max_request_credit - retry_sz; + goto retry_allocation; + } + + if (retry_sz) + pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ + "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kb)\n", ioc->name, ioc->hba_queue_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + + /* hi-priority queue */ + ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) * + ioc->request_sz); + ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) * + ioc->request_sz); + + /* internal queue */ + ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth * + ioc->request_sz); + ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth * + ioc->request_sz); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz, + (ioc->hba_queue_depth * ioc->request_sz)/1024)); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n", + ioc->name, (unsigned long long) ioc->request_dma)); + total_sz += sz; + + sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker); + ioc->scsi_lookup_pages = get_order(sz); + ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages( + GFP_KERNEL, ioc->scsi_lookup_pages); + if (!ioc->scsi_lookup) { + pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n", + ioc->name, (int)sz); + goto out; + } + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n", + ioc->name, ioc->request, ioc->scsiio_depth)); + + ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH); + sz = ioc->chain_depth * sizeof(struct chain_tracker); + ioc->chain_pages = get_order(sz); + ioc->chain_lookup = (struct chain_tracker *)__get_free_pages( + GFP_KERNEL, ioc->chain_pages); + if (!ioc->chain_lookup) { + pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n", + ioc->name); + goto out; + } + ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev, + ioc->request_sz, 16, 0); + if (!ioc->chain_dma_pool) { + pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + for (i = 0; i < ioc->chain_depth; i++) { + ioc->chain_lookup[i].chain_buffer = pci_pool_alloc( + ioc->chain_dma_pool , GFP_KERNEL, + &ioc->chain_lookup[i].chain_buffer_dma); + if (!ioc->chain_lookup[i].chain_buffer) { + ioc->chain_depth = i; + goto chain_done; + } + total_sz += ioc->request_sz; + } + chain_done: + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->chain_depth, ioc->request_sz, + ((ioc->chain_depth * ioc->request_sz))/1024)); + + /* initialize hi-priority queue smid's */ + ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->hpr_lookup) { + pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + ioc->hi_priority_smid = ioc->scsiio_depth + 1; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "hi_priority(0x%p): depth(%d), start smid(%d)\n", + ioc->name, ioc->hi_priority, + ioc->hi_priority_depth, ioc->hi_priority_smid)); + + /* initialize internal queue smid's */ + ioc->internal_lookup = kcalloc(ioc->internal_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->internal_lookup) { + pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "internal(0x%p): depth(%d), start smid(%d)\n", + ioc->name, ioc->internal, + ioc->internal_depth, ioc->internal_smid)); + + /* sense buffers, 4 byte align */ + sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; + ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, + 0); + if (!ioc->sense_dma_pool) { + pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, + &ioc->sense_dma); + if (!ioc->sense) { + pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "sense pool(0x%p): depth(%d), element_size(%d), pool_size" + "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth, + SCSI_SENSE_BUFFERSIZE, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->sense_dma)); + total_sz += sz; + + /* reply pool, 4 byte align */ + sz = ioc->reply_free_queue_depth * ioc->reply_sz; + ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, + 0); + if (!ioc->reply_dma_pool) { + pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) { + pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + ioc->reply_dma_min_address = (u32)(ioc->reply_dma); + ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_dma)); + total_sz += sz; + + /* reply free queue, 16 byte align */ + sz = ioc->reply_free_queue_depth * 4; + ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) { + pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, + &ioc->reply_free_dma); + if (!ioc->reply_free) { + pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \ + "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_free_dma (0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_free_dma)); + total_sz += sz; + + /* reply post queue, 16 byte align */ + reply_post_free_sz = ioc->reply_post_queue_depth * + sizeof(Mpi2DefaultReplyDescriptor_t); + if (_base_is_controller_msix_enabled(ioc)) + sz = reply_post_free_sz * ioc->reply_queue_count; + else + sz = reply_post_free_sz; + ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_post_free_dma_pool) { + pr_err(MPT3SAS_FMT + "reply_post_free pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , + GFP_KERNEL, &ioc->reply_post_free_dma); + if (!ioc->reply_post_free) { + pr_err(MPT3SAS_FMT + "reply_post_free pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + memset(ioc->reply_post_free, 0, sz); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply post free pool" \ + "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, + sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_post_free_dma = (0x%llx)\n", + ioc->name, (unsigned long long) + ioc->reply_post_free_dma)); + total_sz += sz; + + ioc->config_page_sz = 512; + ioc->config_page = pci_alloc_consistent(ioc->pdev, + ioc->config_page_sz, &ioc->config_page_dma); + if (!ioc->config_page) { + pr_err(MPT3SAS_FMT + "config page: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "config page(0x%p): size(%d)\n", + ioc->name, ioc->config_page, ioc->config_page_sz)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->config_page_dma)); + total_sz += ioc->config_page_sz; + + pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n", + ioc->name, total_sz/1024); + pr_info(MPT3SAS_FMT + "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n", + ioc->name, ioc->shost->can_queue, facts->RequestCredit); + pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n", + ioc->name, ioc->shost->sg_tablesize); + return 0; + + out: + return -ENOMEM; +} + +/** + * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + s = readl(&ioc->chip->Doorbell); + sc = s & MPI2_IOC_STATE_MASK; + return cooked ? sc : s; +} + +/** + * _base_wait_on_iocstate - waiting on a particular ioc state + * @ioc_state: controller state { READY, OPERATIONAL, or RESET } + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout, + int sleep_flag) +{ + u32 count, cntdn; + u32 current_state; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + current_state = mpt3sas_base_get_iocstate(ioc, 1); + if (current_state == ioc_state) + return 0; + if (count && current_state == MPI2_IOC_STATE_FAULT) + break; + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + return current_state; +} + +/** + * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by + * a write to the doorbell) + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. + */ +static int +_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), int_status(%x)!\n", + ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to + * doorbell. + */ +static int +_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + u32 doorbell; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc , doorbell); + return -EFAULT; + } + } else if (int_status == 0xFFFFFFFF) + goto out; + + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + out: + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), int_status(%x)!\n", + ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 doorbell_reg; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + doorbell_reg = readl(&ioc->chip->Doorbell); + if (!(doorbell_reg & MPI2_DOORBELL_USED)) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n", + ioc->name, __func__, count, doorbell_reg); + return -EFAULT; +} + +/** + * _base_send_ioc_reset - send doorbell reset + * @ioc: per adapter object + * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout, + int sleep_flag) +{ + u32 ioc_state; + int r = 0; + + if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { + pr_err(MPT3SAS_FMT "%s: unknown reset_type\n", + ioc->name, __func__); + return -EFAULT; + } + + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) + return -EFAULT; + + pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name); + + writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, + &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { + r = -EFAULT; + goto out; + } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, + timeout, sleep_flag); + if (ioc_state) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + r = -EFAULT; + goto out; + } + out: + pr_info(MPT3SAS_FMT "message unit reset: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_handshake_req_reply_wait - send request thru doorbell interface + * @ioc: per adapter object + * @request_bytes: request length + * @request: pointer having request payload + * @reply_bytes: reply length + * @reply: pointer to reply payload + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, + u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) +{ + MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; + int i; + u8 failed; + u16 dummy; + __le32 *mfp; + + /* make sure doorbell is not in use */ + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + pr_err(MPT3SAS_FMT + "doorbell is in use (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* clear pending doorbell interrupts from previous state changes */ + if (readl(&ioc->chip->HostInterruptStatus) & + MPI2_HIS_IOC2SYS_DB_STATUS) + writel(0, &ioc->chip->HostInterruptStatus); + + /* send message to ioc */ + writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | + ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), + &ioc->chip->Doorbell); + + if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + writel(0, &ioc->chip->HostInterruptStatus); + + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake ack failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* send message 32-bits at a time */ + for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { + writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) + failed = 1; + } + + if (failed) { + pr_err(MPT3SAS_FMT + "doorbell handshake sending request failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* now wait for the reply */ + if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* read the first two 16-bits, it gives the total length of the reply */ + reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + + for (i = 2; i < default_reply->MsgLength * 2; i++) { + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + if (i >= reply_bytes/2) /* overflow case */ + dummy = readl(&ioc->chip->Doorbell); + else + reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + } + + _base_wait_for_doorbell_int(ioc, 5, sleep_flag); + if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "doorbell is in use (line=%d)\n", ioc->name, __LINE__)); + } + writel(0, &ioc->chip->HostInterruptStatus); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + mfp = (__le32 *)reply; + pr_info("\toffset:data\n"); + for (i = 0; i < reply_bytes/4; i++) + pr_info("\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + return 0; +} + +/** + * mpt3sas_base_sas_iounit_control - send sas iounit control to FW + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SAS IO Unit Control Request message allows the host to perform low-level + * operations, such as resets on the PHYs of the IO Unit, also allows the host + * to obtain the IOC assigned device handles for a device if it has other + * identifying information about the device, in addition allows the host to + * remove IOC resources associated with the device. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, + Mpi2SasIoUnitControlRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT3_CMD_PENDING; + request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); + if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) + ioc->ioc_link_reset_in_progress = 1; + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && + ioc->ioc_link_reset_in_progress) + ioc->ioc_link_reset_in_progress = 0; + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4); + if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SasIoUnitControlReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * mpt3sas_base_scsi_enclosure_processor - sending request to sep device + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SCSI Enclosure Processor request message causes the IOC to + * communicate with SES devices to control LED status signals. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, + __func__, wait_state_count); + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT3_CMD_PENDING; + request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SepRequest_t)/4); + if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SepReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * _base_get_port_facts - obtain port facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag) +{ + Mpi2PortFactsRequest_t mpi_request; + Mpi2PortFactsReply_t mpi_reply; + struct mpt3sas_port_facts *pfacts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); + mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; + mpi_request.PortNumber = port; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + pfacts = &ioc->pfacts[port]; + memset(pfacts, 0, sizeof(struct mpt3sas_port_facts)); + pfacts->PortNumber = mpi_reply.PortNumber; + pfacts->VP_ID = mpi_reply.VP_ID; + pfacts->VF_ID = mpi_reply.VF_ID; + pfacts->MaxPostedCmdBuffers = + le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); + + return 0; +} + +/** + * _base_get_ioc_facts - obtain ioc facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsRequest_t mpi_request; + Mpi2IOCFactsReply_t mpi_reply; + struct mpt3sas_facts *facts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); + mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + facts = &ioc->facts; + memset(facts, 0, sizeof(struct mpt3sas_facts)); + facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); + facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); + facts->VP_ID = mpi_reply.VP_ID; + facts->VF_ID = mpi_reply.VF_ID; + facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); + facts->MaxChainDepth = mpi_reply.MaxChainDepth; + facts->WhoInit = mpi_reply.WhoInit; + facts->NumberOfPorts = mpi_reply.NumberOfPorts; + facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors; + facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); + facts->MaxReplyDescriptorPostQueueDepth = + le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); + facts->ProductID = le16_to_cpu(mpi_reply.ProductID); + facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); + if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) + ioc->ir_firmware = 1; + facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); + facts->IOCRequestFrameSize = + le16_to_cpu(mpi_reply.IOCRequestFrameSize); + facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); + facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); + ioc->shost->max_id = -1; + facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); + facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); + facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); + facts->HighPriorityCredit = + le16_to_cpu(mpi_reply.HighPriorityCredit); + facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; + facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "hba queue depth(%d), max chains per io(%d)\n", + ioc->name, facts->RequestCredit, + facts->MaxChainDepth)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "request frame size(%d), reply frame size(%d)\n", ioc->name, + facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); + return 0; +} + +/** + * _base_send_ioc_init - send ioc_init to firmware + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCInitRequest_t mpi_request; + Mpi2IOCInitReply_t mpi_reply; + int r; + struct timeval current_time; + u16 ioc_status; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); + mpi_request.Function = MPI2_FUNCTION_IOC_INIT; + mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; + mpi_request.VF_ID = 0; /* TODO */ + mpi_request.VP_ID = 0; + mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); + mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); + + if (_base_is_controller_msix_enabled(ioc)) + mpi_request.HostMSIxVectors = ioc->reply_queue_count; + mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); + mpi_request.ReplyDescriptorPostQueueDepth = + cpu_to_le16(ioc->reply_post_queue_depth); + mpi_request.ReplyFreeQueueDepth = + cpu_to_le16(ioc->reply_free_queue_depth); + + mpi_request.SenseBufferAddressHigh = + cpu_to_le32((u64)ioc->sense_dma >> 32); + mpi_request.SystemReplyAddressHigh = + cpu_to_le32((u64)ioc->reply_dma >> 32); + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le64((u64)ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le64((u64)ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le64((u64)ioc->reply_post_free_dma); + + + /* This time stamp specifies number of milliseconds + * since epoch ~ midnight January 1, 1970. + */ + do_gettimeofday(¤t_time); + mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + + (current_time.tv_usec / 1000)); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + __le32 *mfp; + int i; + + mfp = (__le32 *)&mpi_request; + pr_info("\toffset:data\n"); + for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) + pr_info("\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + + r = _base_handshake_req_reply_wait(ioc, + sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, + sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, + sleep_flag); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS || + mpi_reply.IOCLogInfo) { + pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__); + r = -EIO; + } + + return 0; +} + +/** + * mpt3sas_port_enable_done - command completion routine for port enable + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED) + return 1; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return 1; + + if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE) + return 1; + + ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING; + ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE; + ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID; + memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + ioc->port_enable_failed = 1; + + if (ioc->is_driver_loading) { + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + mpt3sas_port_enable_complete(ioc); + return 1; + } else { + ioc->start_scan_failed = ioc_status; + ioc->start_scan = 0; + return 1; + } + } + complete(&ioc->port_enable_cmds.done); + return 1; +} + +/** + * _base_send_port_enable - send port_enable(discovery stuff) to firmware + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2PortEnableRequest_t *mpi_request; + Mpi2PortEnableReply_t *mpi_reply; + unsigned long timeleft; + int r = 0; + u16 smid; + u16 ioc_status; + + pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); + + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->port_enable_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->port_enable_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + + init_completion(&ioc->port_enable_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done, + 300*HZ); + if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2PortEnableRequest_t)/4); + if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + goto out; + } + + mpi_reply = ioc->port_enable_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n", + ioc->name, __func__, ioc_status); + r = -EFAULT; + goto out; + } + + out: + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ? + "SUCCESS" : "FAILED")); + return r; +} + +/** + * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2PortEnableRequest_t *mpi_request; + u16 smid; + + pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); + + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->port_enable_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->port_enable_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + + mpt3sas_base_put_smid_default(ioc, smid); + return 0; +} + +/** + * _base_determine_wait_on_discovery - desposition + * @ioc: per adapter object + * + * Decide whether to wait on discovery to complete. Used to either + * locate boot device, or report volumes ahead of physical devices. + * + * Returns 1 for wait, 0 for don't wait + */ +static int +_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc) +{ + /* We wait for discovery to complete if IR firmware is loaded. + * The sas topology events arrive before PD events, so we need time to + * turn on the bit in ioc->pd_handles to indicate PD + * Also, it maybe required to report Volumes ahead of physical + * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set. + */ + if (ioc->ir_firmware) + return 1; + + /* if no Bios, then we don't need to wait */ + if (!ioc->bios_pg3.BiosVersion) + return 0; + + /* Bios is present, then we drop down here. + * + * If there any entries in the Bios Page 2, then we wait + * for discovery to complete. + */ + + /* Current Boot Device */ + if ((ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Request Boot Device */ + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Alternate Request Boot Device */ + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED) + return 0; + + return 1; +} + +/** + * _base_unmask_events - turn on notification for this event + * @ioc: per adapter object + * @event: firmware event + * + * The mask is stored in ioc->event_masks. + */ +static void +_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event) +{ + u32 desired_event; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + + if (event < 32) + ioc->event_masks[0] &= ~desired_event; + else if (event < 64) + ioc->event_masks[1] &= ~desired_event; + else if (event < 96) + ioc->event_masks[2] &= ~desired_event; + else if (event < 128) + ioc->event_masks[3] &= ~desired_event; +} + +/** + * _base_event_notification - send event notification + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2EventNotificationRequest_t *mpi_request; + unsigned long timeleft; + u16 smid; + int r = 0; + int i; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->base_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + ioc->base_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); + mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mpi_request->EventMasks[i] = + cpu_to_le32(ioc->event_masks[i]); + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2EventNotificationRequest_t)/4); + if (ioc->base_cmds.status & MPT3_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + } else + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n", + ioc->name, __func__)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + return r; +} + +/** + * mpt3sas_base_validate_event_type - validating event types + * @ioc: per adapter object + * @event: firmware event + * + * This will turn on firmware event notification when application + * ask for that event. We don't mask events that are already enabled. + */ +void +mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type) +{ + int i, j; + u32 event_mask, desired_event; + u8 send_update_to_fw; + + for (i = 0, send_update_to_fw = 0; i < + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { + event_mask = ~event_type[i]; + desired_event = 1; + for (j = 0; j < 32; j++) { + if (!(event_mask & desired_event) && + (ioc->event_masks[i] & desired_event)) { + ioc->event_masks[i] &= ~desired_event; + send_update_to_fw = 1; + } + desired_event = (desired_event << 1); + } + } + + if (!send_update_to_fw) + return; + + mutex_lock(&ioc->base_cmds.mutex); + _base_event_notification(ioc, CAN_SLEEP); + mutex_unlock(&ioc->base_cmds.mutex); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name); + + drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n", + ioc->name)); + + count = 0; + do { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + drsprintk(ioc, pr_info(MPT3SAS_FMT + "write magic sequence\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + + if (count++ > 20) + goto out; + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + drsprintk(ioc, pr_info(MPT3SAS_FMT + "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", + ioc->name, count, host_diagnostic)); + + } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + + hcb_size = readl(&ioc->chip->HCBSize); + + drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n", + ioc->name)); + writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, + &ioc->chip->HostDiagnostic); + + /* don't access any registers for 50 milliseconds */ + msleep(50); + + /* 300 second max wait */ + for (count = 0; count < 3000000 ; count++) { + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic == 0xFFFFFFFF) + goto out; + if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) + break; + + /* wait 1 msec */ + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + mdelay(1); + } + + if (host_diagnostic & MPI2_DIAG_HCB_MODE) { + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "restart the adapter assuming the HCB Address points to good F/W\n", + ioc->name)); + host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; + host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "re-enable the HCDW\n", ioc->name)); + writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, + &ioc->chip->HCBSize); + } + + drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n", + ioc->name)); + writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, + &ioc->chip->HostDiagnostic); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "disable writes to the diagnostic register\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "Wait for FW to go to the READY state\n", ioc->name)); + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, + sleep_flag); + if (ioc_state) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + goto out; + } + + pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name); + return 0; + + out: + pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name); + return -EFAULT; +} + +/** + * _base_make_ioc_ready - put controller in READY state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + u32 ioc_state; + int rc; + int count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->pci_error_recovery) + return 0; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n", + ioc->name, __func__, ioc_state)); + + /* if in RESET state, it should move to READY state shortly */ + count = 0; + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) { + while ((ioc_state & MPI2_IOC_STATE_MASK) != + MPI2_IOC_STATE_READY) { + if (count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + return -EFAULT; + } + if (sleep_flag == CAN_SLEEP) + ssleep(1); + else + mdelay(1000); + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + } + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) + return 0; + + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "unexpected doorbell active!\n", + ioc->name)); + goto issue_diag_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_diag_reset; + } + + if (type == FORCE_BIG_HAMMER) + goto issue_diag_reset; + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) + if (!(_base_send_ioc_reset(ioc, + MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) { + return 0; + } + + issue_diag_reset: + rc = _base_diag_reset(ioc, CAN_SLEEP); + return rc; +} + +/** + * _base_make_ioc_operational - put controller in OPERATIONAL state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + int r, i; + unsigned long flags; + u32 reply_address; + u16 smid; + struct _tr_list *delayed_tr, *delayed_tr_next; + struct adapter_reply_queue *reply_q; + long reply_post_free; + u32 reply_post_free_sz; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + /* clean the delayed target reset list */ + list_for_each_entry_safe(delayed_tr, delayed_tr_next, + &ioc->delayed_tr_list, list) { + list_del(&delayed_tr->list); + kfree(delayed_tr); + } + + + list_for_each_entry_safe(delayed_tr, delayed_tr_next, + &ioc->delayed_tr_volume_list, list) { + list_del(&delayed_tr->list); + kfree(delayed_tr); + } + + /* initialize the scsi lookup free list */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + INIT_LIST_HEAD(&ioc->free_list); + smid = 1; + for (i = 0; i < ioc->scsiio_depth; i++, smid++) { + INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list); + ioc->scsi_lookup[i].cb_idx = 0xFF; + ioc->scsi_lookup[i].smid = smid; + ioc->scsi_lookup[i].scmd = NULL; + list_add_tail(&ioc->scsi_lookup[i].tracker_list, + &ioc->free_list); + } + + /* hi-priority queue */ + INIT_LIST_HEAD(&ioc->hpr_free_list); + smid = ioc->hi_priority_smid; + for (i = 0; i < ioc->hi_priority_depth; i++, smid++) { + ioc->hpr_lookup[i].cb_idx = 0xFF; + ioc->hpr_lookup[i].smid = smid; + list_add_tail(&ioc->hpr_lookup[i].tracker_list, + &ioc->hpr_free_list); + } + + /* internal queue */ + INIT_LIST_HEAD(&ioc->internal_free_list); + smid = ioc->internal_smid; + for (i = 0; i < ioc->internal_depth; i++, smid++) { + ioc->internal_lookup[i].cb_idx = 0xFF; + ioc->internal_lookup[i].smid = smid; + list_add_tail(&ioc->internal_lookup[i].tracker_list, + &ioc->internal_free_list); + } + + /* chain pool */ + INIT_LIST_HEAD(&ioc->free_chain_list); + for (i = 0; i < ioc->chain_depth; i++) + list_add_tail(&ioc->chain_lookup[i].tracker_list, + &ioc->free_chain_list); + + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* initialize Reply Free Queue */ + for (i = 0, reply_address = (u32)ioc->reply_dma ; + i < ioc->reply_free_queue_depth ; i++, reply_address += + ioc->reply_sz) + ioc->reply_free[i] = cpu_to_le32(reply_address); + + /* initialize reply queues */ + if (ioc->is_driver_loading) + _base_assign_reply_queues(ioc); + + /* initialize Reply Post Free Queue */ + reply_post_free = (long)ioc->reply_post_free; + reply_post_free_sz = ioc->reply_post_queue_depth * + sizeof(Mpi2DefaultReplyDescriptor_t); + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + reply_q->reply_post_host_index = 0; + reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *) + reply_post_free; + for (i = 0; i < ioc->reply_post_queue_depth; i++) + reply_q->reply_post_free[i].Words = + cpu_to_le64(ULLONG_MAX); + if (!_base_is_controller_msix_enabled(ioc)) + goto skip_init_reply_post_free_queue; + reply_post_free += reply_post_free_sz; + } + skip_init_reply_post_free_queue: + + r = _base_send_ioc_init(ioc, sleep_flag); + if (r) + return r; + + /* initialize reply free host index */ + ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; + writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); + + /* initialize reply post host index */ + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT, + &ioc->chip->ReplyPostHostIndex); + if (!_base_is_controller_msix_enabled(ioc)) + goto skip_init_reply_post_host_index; + } + + skip_init_reply_post_host_index: + + _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, sleep_flag); + if (r) + return r; + + if (sleep_flag == CAN_SLEEP) + _base_static_config_pages(ioc); + + + if (ioc->is_driver_loading) { + ioc->wait_for_discovery_to_complete = + _base_determine_wait_on_discovery(ioc); + + return r; /* scan_start and scan_finished support */ + } + + r = _base_send_port_enable(ioc, sleep_flag); + if (r) + return r; + + return r; +} + +/** + * mpt3sas_base_free_resources - free resources controller resources + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + _base_mask_interrupts(ioc); + ioc->shost_recovery = 1; + _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + ioc->shost_recovery = 0; + _base_free_irq(ioc); + _base_disable_msix(ioc); + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + return; +} + +/** + * mpt3sas_base_attach - attach controller instance + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) +{ + int r, i; + int cpu_id, last_cpu_id = 0; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + /* setup cpu_msix_table */ + ioc->cpu_count = num_online_cpus(); + for_each_online_cpu(cpu_id) + last_cpu_id = cpu_id; + ioc->cpu_msix_table_sz = last_cpu_id + 1; + ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL); + ioc->reply_queue_count = 1; + if (!ioc->cpu_msix_table) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "allocation for cpu_msix_table failed!!!\n", + ioc->name)); + r = -ENOMEM; + goto out_free_resources; + } + + r = mpt3sas_base_map_resources(ioc); + if (r) + goto out_free_resources; + + + pci_set_drvdata(ioc->pdev, ioc->shost); + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + /* + * In SAS3.0, + * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and + * Target Status - all require the IEEE formated scatter gather + * elements. + */ + + ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; + ioc->build_sg = &_base_build_sg_ieee; + ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; + ioc->mpi25 = 1; + ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); + + /* + * These function pointers for other requests that don't + * the require IEEE scatter gather elements. + * + * For example Configuration Pages and SAS IOUNIT Control don't. + */ + ioc->build_sg_mpi = &_base_build_sg; + ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; + + r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (r) + goto out_free_resources; + + ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, + sizeof(struct mpt3sas_port_facts), GFP_KERNEL); + if (!ioc->pfacts) { + r = -ENOMEM; + goto out_free_resources; + } + + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { + r = _base_get_port_facts(ioc, i, CAN_SLEEP); + if (r) + goto out_free_resources; + } + + r = _base_allocate_memory_pools(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + init_waitqueue_head(&ioc->reset_wq); + + /* allocate memory pd handle bitmask list */ + ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); + if (ioc->facts.MaxDevHandle % 8) + ioc->pd_handles_sz++; + ioc->pd_handles = kzalloc(ioc->pd_handles_sz, + GFP_KERNEL); + if (!ioc->pd_handles) { + r = -ENOMEM; + goto out_free_resources; + } + ioc->blocking_handles = kzalloc(ioc->pd_handles_sz, + GFP_KERNEL); + if (!ioc->blocking_handles) { + r = -ENOMEM; + goto out_free_resources; + } + + ioc->fwfault_debug = mpt3sas_fwfault_debug; + + /* base internal command bits */ + mutex_init(&ioc->base_cmds.mutex); + ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + + /* port_enable command bits */ + ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + + /* transport internal command bits */ + ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->transport_cmds.mutex); + + /* scsih internal command bits */ + ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->scsih_cmds.mutex); + + /* task management internal command bits */ + ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->tm_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->tm_cmds.mutex); + + /* config page internal command bits */ + ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->config_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->config_cmds.mutex); + + /* ctl module internal command bits */ + ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->ctl_cmds.mutex); + + if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || + !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || + !ioc->config_cmds.reply || !ioc->ctl_cmds.reply || + !ioc->ctl_cmds.sense) { + r = -ENOMEM; + goto out_free_resources; + } + + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + ioc->event_masks[i] = -1; + + /* here we enable the events we care about */ + _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); + _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); + _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); + _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); + _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + + r = _base_make_ioc_operational(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + return 0; + + out_free_resources: + + ioc->remove_host = 1; + + mpt3sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); + kfree(ioc->cpu_msix_table); + kfree(ioc->pd_handles); + kfree(ioc->blocking_handles); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); + kfree(ioc->config_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->ctl_cmds.sense); + kfree(ioc->pfacts); + ioc->ctl_cmds.reply = NULL; + ioc->base_cmds.reply = NULL; + ioc->tm_cmds.reply = NULL; + ioc->scsih_cmds.reply = NULL; + ioc->transport_cmds.reply = NULL; + ioc->config_cmds.reply = NULL; + ioc->pfacts = NULL; + return r; +} + + +/** + * mpt3sas_base_detach - remove controller instance + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) +{ + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); + kfree(ioc->cpu_msix_table); + kfree(ioc->pd_handles); + kfree(ioc->blocking_handles); + kfree(ioc->pfacts); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->ctl_cmds.sense); + kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); + kfree(ioc->config_cmds.reply); +} + +/** + * _base_reset_handler - reset callback handler (for base) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET, + * MPT3_IOC_DONE_RESET + * + * Return nothing. + */ +static void +_base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase) +{ + mpt3sas_scsih_reset_handler(ioc, reset_phase); + mpt3sas_ctl_reset_handler(ioc, reset_phase); + switch (reset_phase) { + case MPT3_IOC_PRE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT3_IOC_AFTER_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->transport_cmds.status & MPT3_CMD_PENDING) { + ioc->transport_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid); + complete(&ioc->transport_cmds.done); + } + if (ioc->base_cmds.status & MPT3_CMD_PENDING) { + ioc->base_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid); + complete(&ioc->base_cmds.done); + } + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + ioc->port_enable_failed = 1; + ioc->port_enable_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid); + if (ioc->is_driver_loading) { + ioc->start_scan_failed = + MPI2_IOCSTATUS_INTERNAL_ERROR; + ioc->start_scan = 0; + ioc->port_enable_cmds.status = + MPT3_CMD_NOT_USED; + } else + complete(&ioc->port_enable_cmds.done); + } + if (ioc->config_cmds.status & MPT3_CMD_PENDING) { + ioc->config_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid); + ioc->config_cmds.smid = USHRT_MAX; + complete(&ioc->config_cmds.done); + } + break; + case MPT3_IOC_DONE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } +} + +/** + * _wait_for_commands_to_complete - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * This function waiting(3s) for all pending commands to complete + * prior to putting controller in reset. + */ +static void +_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 ioc_state; + unsigned long flags; + u16 i; + + ioc->pending_io_count = 0; + if (sleep_flag != CAN_SLEEP) + return; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) + return; + + /* pending command count */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = 0; i < ioc->scsiio_depth; i++) + if (ioc->scsi_lookup[i].cb_idx != 0xFF) + ioc->pending_io_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!ioc->pending_io_count) + return; + + /* wait for pending commands to complete */ + wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ); +} + +/** + * mpt3sas_base_hard_reset_handler - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + int r; + unsigned long flags; + u32 ioc_state; + u8 is_fault = 0, is_trigger = 0; + + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + if (ioc->pci_error_recovery) { + pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n", + ioc->name, __func__); + r = 0; + goto out_unlocked; + } + + if (mpt3sas_fwfault_debug) + mpt3sas_halt_firmware(ioc); + + /* TODO - What we really should be doing is pulling + * out all the code associated with NO_SLEEP; its never used. + * That is legacy code from mpt fusion driver, ported over. + * I will leave this BUG_ON here for now till its been resolved. + */ + BUG_ON(sleep_flag == NO_SLEEP); + + /* wait for an active reset in progress to complete */ + if (!mutex_trylock(&ioc->reset_in_progress_mutex)) { + do { + ssleep(1); + } while (ioc->shost_recovery == 1); + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); + return ioc->ioc_reset_in_progress_status; + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->shost_recovery = 1; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) && + (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED))) { + is_trigger = 1; + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + is_fault = 1; + } + _base_reset_handler(ioc, MPT3_IOC_PRE_RESET); + _wait_for_commands_to_complete(ioc, sleep_flag); + _base_mask_interrupts(ioc); + r = _base_make_ioc_ready(ioc, sleep_flag, type); + if (r) + goto out; + _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET); + + /* If this hard reset is called while port enable is active, then + * there is no reason to call make_ioc_operational + */ + if (ioc->is_driver_loading && ioc->port_enable_failed) { + ioc->remove_host = 1; + r = -EFAULT; + goto out; + } + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out; + r = _base_make_ioc_operational(ioc, sleep_flag); + if (!r) + _base_reset_handler(ioc, MPT3_IOC_DONE_RESET); + + out: + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n", + ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_in_progress_status = r; + ioc->shost_recovery = 0; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_count++; + mutex_unlock(&ioc->reset_in_progress_mutex); + + out_unlocked: + if ((r == 0) && is_trigger) { + if (is_fault) + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT); + else + mpt3sas_trigger_master(ioc, + MASTER_TRIGGER_ADAPTER_RESET); + } + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); + return r; +} diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h new file mode 100644 index 0000000..994656c --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -0,0 +1,1139 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT3SAS_BASE_H_INCLUDED +#define MPT3SAS_BASE_H_INCLUDED + +#include "mpi/mpi2_type.h" +#include "mpi/mpi2.h" +#include "mpi/mpi2_ioc.h" +#include "mpi/mpi2_cnfg.h" +#include "mpi/mpi2_init.h" +#include "mpi/mpi2_raid.h" +#include "mpi/mpi2_tool.h" +#include "mpi/mpi2_sas.h" + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_eh.h> + +#include "mpt3sas_debug.h" +#include "mpt3sas_trigger_diag.h" + +/* driver versioning info */ +#define MPT3SAS_DRIVER_NAME "mpt3sas" +#define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" +#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" +#define MPT3SAS_DRIVER_VERSION "01.100.01.00" +#define MPT3SAS_MAJOR_VERSION 1 +#define MPT3SAS_MINOR_VERSION 100 +#define MPT3SAS_BUILD_VERSION 1 +#define MPT3SAS_RELEASE_VERSION 00 + +/* + * Set MPT3SAS_SG_DEPTH value based on user input. + */ +#define MPT3SAS_MAX_PHYS_SEGMENTS SCSI_MAX_SG_SEGMENTS +#define MPT3SAS_MIN_PHYS_SEGMENTS 16 +#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE +#define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE +#else +#define MPT3SAS_SG_DEPTH MPT3SAS_MAX_PHYS_SEGMENTS +#endif + + +/* + * Generic Defines + */ +#define MPT3SAS_SATA_QUEUE_DEPTH 32 +#define MPT3SAS_SAS_QUEUE_DEPTH 254 +#define MPT3SAS_RAID_QUEUE_DEPTH 128 + +#define MPT_NAME_LENGTH 32 /* generic length of strings */ +#define MPT_STRING_LENGTH 64 + +#define MPT_MAX_CALLBACKS 32 + + +#define CAN_SLEEP 1 +#define NO_SLEEP 0 + +#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ + +#define MPI3_HIM_MASK 0xFFFFFFFF /* mask every bit*/ + +#define MPT3SAS_INVALID_DEVICE_HANDLE 0xFFFF + +/* + * reset phases + */ +#define MPT3_IOC_PRE_RESET 1 /* prior to host reset */ +#define MPT3_IOC_AFTER_RESET 2 /* just after host reset */ +#define MPT3_IOC_DONE_RESET 3 /* links re-initialized */ + +/* + * logging format + */ +#define MPT3SAS_FMT "%s: " + +/* + * per target private data + */ +#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 +#define MPT_TARGET_FLAGS_VOLUME 0x02 +#define MPT_TARGET_FLAGS_DELETED 0x04 +#define MPT_TARGET_FASTPATH_IO 0x08 + + + +/* + * status bits for ioc->diag_buffer_status + */ +#define MPT3_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT3_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT3_DIAG_BUFFER_IS_DIAG_RESET (0x04) + + +/* OEM Identifiers */ +#define MFG10_OEM_ID_INVALID (0x00000000) +#define MFG10_OEM_ID_DELL (0x00000001) +#define MFG10_OEM_ID_FSC (0x00000002) +#define MFG10_OEM_ID_SUN (0x00000003) +#define MFG10_OEM_ID_IBM (0x00000004) + +/* GENERIC Flags 0*/ +#define MFG10_GF0_OCE_DISABLED (0x00000001) +#define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002) +#define MFG10_GF0_R10_DISPLAY (0x00000004) +#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008) +#define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010) + +/* OEM Specific Flags will come from OEM specific header files */ +struct Mpi2ManufacturingPage10_t { + MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ + U8 OEMIdentifier; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 08h */ + U32 Reserved3; /* 0Ch */ + U32 GenericFlags0; /* 10h */ + U32 GenericFlags1; /* 14h */ + U32 Reserved4; /* 18h */ + U32 OEMSpecificFlags0; /* 1Ch */ + U32 OEMSpecificFlags1; /* 20h */ + U32 Reserved5[18]; /* 24h - 60h*/ +}; + + +/* Miscellaneous options */ +struct Mpi2ManufacturingPage11_t { + MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ + __le32 Reserved1; /* 04h */ + u8 Reserved2; /* 08h */ + u8 EEDPTagMode; /* 09h */ + u8 Reserved3; /* 0Ah */ + u8 Reserved4; /* 0Bh */ + __le32 Reserved5[23]; /* 0Ch-60h*/ +}; + +/** + * struct MPT3SAS_TARGET - starget private hostdata + * @starget: starget object + * @sas_address: target sas address + * @handle: device handle + * @num_luns: number luns + * @flags: MPT_TARGET_FLAGS_XXX flags + * @deleted: target flaged for deletion + * @tm_busy: target is busy with TM request. + */ +struct MPT3SAS_TARGET { + struct scsi_target *starget; + u64 sas_address; + u16 handle; + int num_luns; + u32 flags; + u8 deleted; + u8 tm_busy; +}; + + +/* + * per device private data + */ +#define MPT_DEVICE_FLAGS_INIT 0x01 +#define MPT_DEVICE_TLR_ON 0x02 + +/** + * struct MPT3SAS_DEVICE - sdev private hostdata + * @sas_target: starget private hostdata + * @lun: lun number + * @flags: MPT_DEVICE_XXX flags + * @configured_lun: lun is configured + * @block: device is in SDEV_BLOCK state + * @tlr_snoop_check: flag used in determining whether to disable TLR + * @eedp_enable: eedp support enable bit + * @eedp_type: 0(type_1), 1(type_2), 2(type_3) + * @eedp_block_length: block size + */ +struct MPT3SAS_DEVICE { + struct MPT3SAS_TARGET *sas_target; + unsigned int lun; + u32 flags; + u8 configured_lun; + u8 block; + u8 tlr_snoop_check; +}; + +#define MPT3_CMD_NOT_USED 0x8000 /* free */ +#define MPT3_CMD_COMPLETE 0x0001 /* completed */ +#define MPT3_CMD_PENDING 0x0002 /* pending */ +#define MPT3_CMD_REPLY_VALID 0x0004 /* reply is valid */ +#define MPT3_CMD_RESET 0x0008 /* host reset dropped the command */ + +/** + * struct _internal_cmd - internal commands struct + * @mutex: mutex + * @done: completion + * @reply: reply message pointer + * @sense: sense data + * @status: MPT3_CMD_XXX status + * @smid: system message id + */ +struct _internal_cmd { + struct mutex mutex; + struct completion done; + void *reply; + void *sense; + u16 status; + u16 smid; +}; + + + +/** + * struct _sas_device - attached device information + * @list: sas device list + * @starget: starget object + * @sas_address: device sas address + * @device_name: retrieved from the SAS IDENTIFY frame. + * @handle: device handle + * @sas_address_parent: sas address of parent expander or sas host + * @enclosure_handle: enclosure handle + * @enclosure_logical_id: enclosure logical identifier + * @volume_handle: volume handle (valid when hidden raid member) + * @volume_wwid: volume unique identifier + * @device_info: bitfield provides detailed info about the device + * @id: target id + * @channel: target channel + * @slot: number number + * @phy: phy identifier provided in sas device page 0 + * @fast_path: fast path feature enable bit + * @responding: used in _scsih_sas_device_mark_responding + */ +struct _sas_device { + struct list_head list; + struct scsi_target *starget; + u64 sas_address; + u64 device_name; + u16 handle; + u64 sas_address_parent; + u16 enclosure_handle; + u64 enclosure_logical_id; + u16 volume_handle; + u64 volume_wwid; + u32 device_info; + int id; + int channel; + u16 slot; + u8 phy; + u8 responding; + u8 fast_path; +}; + +/** + * struct _raid_device - raid volume link list + * @list: sas device list + * @starget: starget object + * @sdev: scsi device struct (volumes are single lun) + * @wwid: unique identifier for the volume + * @handle: device handle + * @id: target id + * @channel: target channel + * @volume_type: the raid level + * @device_info: bitfield provides detailed info about the hidden components + * @num_pds: number of hidden raid components + * @responding: used in _scsih_raid_device_mark_responding + * @percent_complete: resync percent complete + */ +#define MPT_MAX_WARPDRIVE_PDS 8 +struct _raid_device { + struct list_head list; + struct scsi_target *starget; + struct scsi_device *sdev; + u64 wwid; + u16 handle; + int id; + int channel; + u8 volume_type; + u8 num_pds; + u8 responding; + u8 percent_complete; + u32 device_info; +}; + +/** + * struct _boot_device - boot device info + * @is_raid: flag to indicate whether this is volume + * @device: holds pointer for either struct _sas_device or + * struct _raid_device + */ +struct _boot_device { + u8 is_raid; + void *device; +}; + +/** + * struct _sas_port - wide/narrow sas port information + * @port_list: list of ports belonging to expander + * @num_phys: number of phys belonging to this port + * @remote_identify: attached device identification + * @rphy: sas transport rphy object + * @port: sas transport wide/narrow port object + * @phy_list: _sas_phy list objects belonging to this port + */ +struct _sas_port { + struct list_head port_list; + u8 num_phys; + struct sas_identify remote_identify; + struct sas_rphy *rphy; + struct sas_port *port; + struct list_head phy_list; +}; + +/** + * struct _sas_phy - phy information + * @port_siblings: list of phys belonging to a port + * @identify: phy identification + * @remote_identify: attached device identification + * @phy: sas transport phy object + * @phy_id: unique phy id + * @handle: device handle for this phy + * @attached_handle: device handle for attached device + * @phy_belongs_to_port: port has been created for this phy + */ +struct _sas_phy { + struct list_head port_siblings; + struct sas_identify identify; + struct sas_identify remote_identify; + struct sas_phy *phy; + u8 phy_id; + u16 handle; + u16 attached_handle; + u8 phy_belongs_to_port; +}; + +/** + * struct _sas_node - sas_host/expander information + * @list: list of expanders + * @parent_dev: parent device class + * @num_phys: number phys belonging to this sas_host/expander + * @sas_address: sas address of this sas_host/expander + * @handle: handle for this sas_host/expander + * @sas_address_parent: sas address of parent expander or sas host + * @enclosure_handle: handle for this a member of an enclosure + * @device_info: bitwise defining capabilities of this sas_host/expander + * @responding: used in _scsih_expander_device_mark_responding + * @phy: a list of phys that make up this sas_host/expander + * @sas_port_list: list of ports attached to this sas_host/expander + */ +struct _sas_node { + struct list_head list; + struct device *parent_dev; + u8 num_phys; + u64 sas_address; + u16 handle; + u64 sas_address_parent; + u16 enclosure_handle; + u64 enclosure_logical_id; + u8 responding; + struct _sas_phy *phy; + struct list_head sas_port_list; +}; + +/** + * enum reset_type - reset state + * @FORCE_BIG_HAMMER: issue diagnostic reset + * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer + */ +enum reset_type { + FORCE_BIG_HAMMER, + SOFT_RESET, +}; + +/** + * struct chain_tracker - firmware chain tracker + * @chain_buffer: chain buffer + * @chain_buffer_dma: physical address + * @tracker_list: list of free request (ioc->free_chain_list) + */ +struct chain_tracker { + void *chain_buffer; + dma_addr_t chain_buffer_dma; + struct list_head tracker_list; +}; + +/** + * struct scsiio_tracker - scsi mf request tracker + * @smid: system message id + * @scmd: scsi request pointer + * @cb_idx: callback index + * @tracker_list: list of free request (ioc->free_list) + */ +struct scsiio_tracker { + u16 smid; + struct scsi_cmnd *scmd; + u8 cb_idx; + struct list_head chain_list; + struct list_head tracker_list; +}; + +/** + * struct request_tracker - firmware request tracker + * @smid: system message id + * @cb_idx: callback index + * @tracker_list: list of free request (ioc->free_list) + */ +struct request_tracker { + u16 smid; + u8 cb_idx; + struct list_head tracker_list; +}; + +/** + * struct _tr_list - target reset list + * @handle: device handle + * @state: state machine + */ +struct _tr_list { + struct list_head list; + u16 handle; + u16 state; +}; + + +/** + * struct adapter_reply_queue - the reply queue struct + * @ioc: per adapter object + * @msix_index: msix index into vector table + * @vector: irq vector + * @reply_post_host_index: head index in the pool where FW completes IO + * @reply_post_free: reply post base virt address + * @name: the name registered to request_irq() + * @busy: isr is actively processing replies on another cpu + * @list: this list +*/ +struct adapter_reply_queue { + struct MPT3SAS_ADAPTER *ioc; + u8 msix_index; + unsigned int vector; + u32 reply_post_host_index; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + char name[MPT_NAME_LENGTH]; + atomic_t busy; + struct list_head list; +}; + +typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); + +/* SAS3.0 support */ +typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid); +typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge, + dma_addr_t data_out_dma, size_t data_out_sz, + dma_addr_t data_in_dma, size_t data_in_sz); +typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc, + void *paddr); + + + +/* IOC Facts and Port Facts converted from little endian to cpu */ +union mpi3_version_union { + MPI2_VERSION_STRUCT Struct; + u32 Word; +}; + +struct mpt3sas_facts { + u16 MsgVersion; + u16 HeaderVersion; + u8 IOCNumber; + u8 VP_ID; + u8 VF_ID; + u16 IOCExceptions; + u16 IOCStatus; + u32 IOCLogInfo; + u8 MaxChainDepth; + u8 WhoInit; + u8 NumberOfPorts; + u8 MaxMSIxVectors; + u16 RequestCredit; + u16 ProductID; + u32 IOCCapabilities; + union mpi3_version_union FWVersion; + u16 IOCRequestFrameSize; + u16 Reserved3; + u16 MaxInitiators; + u16 MaxTargets; + u16 MaxSasExpanders; + u16 MaxEnclosures; + u16 ProtocolFlags; + u16 HighPriorityCredit; + u16 MaxReplyDescriptorPostQueueDepth; + u8 ReplyFrameSize; + u8 MaxVolumes; + u16 MaxDevHandle; + u16 MaxPersistentEntries; + u16 MinDevHandle; +}; + +struct mpt3sas_port_facts { + u8 PortNumber; + u8 VP_ID; + u8 VF_ID; + u8 PortType; + u16 MaxPostedCmdBuffers; +}; + +/** + * enum mutex_type - task management mutex type + * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it + * @TM_MUTEX_ON: mutex is required + */ +enum mutex_type { + TM_MUTEX_OFF = 0, + TM_MUTEX_ON = 1, +}; + +typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); +/** + * struct MPT3SAS_ADAPTER - per adapter struct + * @list: ioc_list + * @shost: shost object + * @id: unique adapter id + * @cpu_count: number online cpus + * @name: generic ioc string + * @tmp_string: tmp string used for logging + * @pdev: pci pdev object + * @pio_chip: physical io register space + * @chip: memory mapped register space + * @chip_phys: physical addrss prior to mapping + * @logging_level: see mpt3sas_debug.h + * @fwfault_debug: debuging FW timeouts + * @ir_firmware: IR firmware present + * @bars: bitmask of BAR's that must be configured + * @mask_interrupts: ignore interrupt + * @fault_reset_work_q_name: fw fault work queue + * @fault_reset_work_q: "" + * @fault_reset_work: "" + * @firmware_event_name: fw event work queue + * @firmware_event_thread: "" + * @fw_event_lock: + * @fw_event_list: list of fw events + * @aen_event_read_flag: event log was read + * @broadcast_aen_busy: broadcast aen waiting to be serviced + * @shost_recovery: host reset in progress + * @ioc_reset_in_progress_lock: + * @ioc_link_reset_in_progress: phy/hard reset in progress + * @ignore_loginfos: ignore loginfos during task management + * @remove_host: flag for when driver unloads, to avoid sending dev resets + * @pci_error_recovery: flag to prevent ioc access until slot reset completes + * @wait_for_discovery_to_complete: flag set at driver load time when + * waiting on reporting devices + * @is_driver_loading: flag set at driver load time + * @port_enable_failed: flag set when port enable has failed + * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work + * @start_scan_failed: means port enable failed, return's the ioc_status + * @msix_enable: flag indicating msix is enabled + * @msix_vector_count: number msix vectors + * @cpu_msix_table: table for mapping cpus to msix index + * @cpu_msix_table_sz: table size + * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands + * @scsi_io_cb_idx: shost generated commands + * @tm_cb_idx: task management commands + * @scsih_cb_idx: scsih internal commands + * @transport_cb_idx: transport internal commands + * @ctl_cb_idx: clt internal commands + * @base_cb_idx: base internal commands + * @config_cb_idx: base internal commands + * @tm_tr_cb_idx : device removal target reset handshake + * @tm_tr_volume_cb_idx : volume removal target reset + * @base_cmds: + * @transport_cmds: + * @scsih_cmds: + * @tm_cmds: + * @ctl_cmds: + * @config_cmds: + * @base_add_sg_single: handler for either 32/64 bit sgl's + * @event_type: bits indicating which events to log + * @event_context: unique id for each logged event + * @event_log: event log pointer + * @event_masks: events that are masked + * @facts: static facts data + * @pfacts: static port facts data + * @manu_pg0: static manufacturing page 0 + * @manu_pg10: static manufacturing page 10 + * @manu_pg11: static manufacturing page 11 + * @bios_pg2: static bios page 2 + * @bios_pg3: static bios page 3 + * @ioc_pg8: static ioc page 8 + * @iounit_pg0: static iounit page 0 + * @iounit_pg1: static iounit page 1 + * @sas_hba: sas host object + * @sas_expander_list: expander object list + * @sas_node_lock: + * @sas_device_list: sas device object list + * @sas_device_init_list: sas device object list (used only at init time) + * @sas_device_lock: + * @io_missing_delay: time for IO completed by fw when PDR enabled + * @device_missing_delay: time for device missing by fw when PDR enabled + * @sas_id : used for setting volume target IDs + * @blocking_handles: bitmask used to identify which devices need blocking + * @pd_handles : bitmask for PD handles + * @pd_handles_sz : size of pd_handle bitmask + * @config_page_sz: config page size + * @config_page: reserve memory for config page payload + * @config_page_dma: + * @hba_queue_depth: hba request queue depth + * @sge_size: sg element size for either 32/64 bit + * @scsiio_depth: SCSI_IO queue depth + * @request_sz: per request frame size + * @request: pool of request frames + * @request_dma: + * @request_dma_sz: + * @scsi_lookup: firmware request tracker list + * @scsi_lookup_lock: + * @free_list: free list of request + * @pending_io_count: + * @reset_wq: + * @chain: pool of chains + * @chain_dma: + * @max_sges_in_main_message: number sg elements in main message + * @max_sges_in_chain_message: number sg elements per chain + * @chains_needed_per_io: max chains per io + * @chain_depth: total chains allocated + * @hi_priority_smid: + * @hi_priority: + * @hi_priority_dma: + * @hi_priority_depth: + * @hpr_lookup: + * @hpr_free_list: + * @internal_smid: + * @internal: + * @internal_dma: + * @internal_depth: + * @internal_lookup: + * @internal_free_list: + * @sense: pool of sense + * @sense_dma: + * @sense_dma_pool: + * @reply_depth: hba reply queue depth: + * @reply_sz: per reply frame size: + * @reply: pool of replys: + * @reply_dma: + * @reply_dma_pool: + * @reply_free_queue_depth: reply free depth + * @reply_free: pool for reply free queue (32 bit addr) + * @reply_free_dma: + * @reply_free_dma_pool: + * @reply_free_host_index: tail index in pool to insert free replys + * @reply_post_queue_depth: reply post queue depth + * @reply_post_free: pool for reply post (64bit descriptor) + * @reply_post_free_dma: + * @reply_queue_count: number of reply queue's + * @reply_queue_list: link list contaning the reply queue info + * @reply_post_host_index: head index in the pool where FW completes IO + * @delayed_tr_list: target reset link list + * @delayed_tr_volume_list: volume target reset link list + */ +struct MPT3SAS_ADAPTER { + struct list_head list; + struct Scsi_Host *shost; + u8 id; + int cpu_count; + char name[MPT_NAME_LENGTH]; + char tmp_string[MPT_STRING_LENGTH]; + struct pci_dev *pdev; + Mpi2SystemInterfaceRegs_t __iomem *chip; + resource_size_t chip_phys; + int logging_level; + int fwfault_debug; + u8 ir_firmware; + int bars; + u8 mask_interrupts; + + /* fw fault handler */ + char fault_reset_work_q_name[20]; + struct workqueue_struct *fault_reset_work_q; + struct delayed_work fault_reset_work; + + /* fw event handler */ + char firmware_event_name[20]; + struct workqueue_struct *firmware_event_thread; + spinlock_t fw_event_lock; + struct list_head fw_event_list; + + /* misc flags */ + int aen_event_read_flag; + u8 broadcast_aen_busy; + u16 broadcast_aen_pending; + u8 shost_recovery; + + struct mutex reset_in_progress_mutex; + spinlock_t ioc_reset_in_progress_lock; + u8 ioc_link_reset_in_progress; + u8 ioc_reset_in_progress_status; + + u8 ignore_loginfos; + u8 remove_host; + u8 pci_error_recovery; + u8 wait_for_discovery_to_complete; + u8 is_driver_loading; + u8 port_enable_failed; + u8 start_scan; + u16 start_scan_failed; + + u8 msix_enable; + u16 msix_vector_count; + u8 *cpu_msix_table; + u16 cpu_msix_table_sz; + u32 ioc_reset_count; + MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; + + /* internal commands, callback index */ + u8 scsi_io_cb_idx; + u8 tm_cb_idx; + u8 transport_cb_idx; + u8 scsih_cb_idx; + u8 ctl_cb_idx; + u8 base_cb_idx; + u8 port_enable_cb_idx; + u8 config_cb_idx; + u8 tm_tr_cb_idx; + u8 tm_tr_volume_cb_idx; + u8 tm_sas_control_cb_idx; + struct _internal_cmd base_cmds; + struct _internal_cmd port_enable_cmds; + struct _internal_cmd transport_cmds; + struct _internal_cmd scsih_cmds; + struct _internal_cmd tm_cmds; + struct _internal_cmd ctl_cmds; + struct _internal_cmd config_cmds; + + MPT_ADD_SGE base_add_sg_single; + + /* function ptr for either IEEE or MPI sg elements */ + MPT_BUILD_SG_SCMD build_sg_scmd; + MPT_BUILD_SG build_sg; + MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge; + u8 mpi25; + u16 sge_size_ieee; + + /* function ptr for MPI sg elements only */ + MPT_BUILD_SG build_sg_mpi; + MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi; + + /* event log */ + u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + u32 event_context; + void *event_log; + u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + + /* static config pages */ + struct mpt3sas_facts facts; + struct mpt3sas_port_facts *pfacts; + Mpi2ManufacturingPage0_t manu_pg0; + struct Mpi2ManufacturingPage10_t manu_pg10; + struct Mpi2ManufacturingPage11_t manu_pg11; + Mpi2BiosPage2_t bios_pg2; + Mpi2BiosPage3_t bios_pg3; + Mpi2IOCPage8_t ioc_pg8; + Mpi2IOUnitPage0_t iounit_pg0; + Mpi2IOUnitPage1_t iounit_pg1; + + struct _boot_device req_boot_device; + struct _boot_device req_alt_boot_device; + struct _boot_device current_boot_device; + + /* sas hba, expander, and device list */ + struct _sas_node sas_hba; + struct list_head sas_expander_list; + spinlock_t sas_node_lock; + struct list_head sas_device_list; + struct list_head sas_device_init_list; + spinlock_t sas_device_lock; + struct list_head raid_device_list; + spinlock_t raid_device_lock; + u8 io_missing_delay; + u16 device_missing_delay; + int sas_id; + + void *blocking_handles; + void *pd_handles; + u16 pd_handles_sz; + + /* config page */ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; + + /* scsiio request */ + u16 hba_queue_depth; + u16 sge_size; + u16 scsiio_depth; + u16 request_sz; + u8 *request; + dma_addr_t request_dma; + u32 request_dma_sz; + struct scsiio_tracker *scsi_lookup; + ulong scsi_lookup_pages; + spinlock_t scsi_lookup_lock; + struct list_head free_list; + int pending_io_count; + wait_queue_head_t reset_wq; + + /* chain */ + struct chain_tracker *chain_lookup; + struct list_head free_chain_list; + struct dma_pool *chain_dma_pool; + ulong chain_pages; + u16 max_sges_in_main_message; + u16 max_sges_in_chain_message; + u16 chains_needed_per_io; + u32 chain_depth; + + /* hi-priority queue */ + u16 hi_priority_smid; + u8 *hi_priority; + dma_addr_t hi_priority_dma; + u16 hi_priority_depth; + struct request_tracker *hpr_lookup; + struct list_head hpr_free_list; + + /* internal queue */ + u16 internal_smid; + u8 *internal; + dma_addr_t internal_dma; + u16 internal_depth; + struct request_tracker *internal_lookup; + struct list_head internal_free_list; + + /* sense */ + u8 *sense; + dma_addr_t sense_dma; + struct dma_pool *sense_dma_pool; + + /* reply */ + u16 reply_sz; + u8 *reply; + dma_addr_t reply_dma; + u32 reply_dma_max_address; + u32 reply_dma_min_address; + struct dma_pool *reply_dma_pool; + + /* reply free queue */ + u16 reply_free_queue_depth; + __le32 *reply_free; + dma_addr_t reply_free_dma; + struct dma_pool *reply_free_dma_pool; + u32 reply_free_host_index; + + /* reply post queue */ + u16 reply_post_queue_depth; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + dma_addr_t reply_post_free_dma; + struct dma_pool *reply_post_free_dma_pool; + u8 reply_queue_count; + struct list_head reply_queue_list; + + struct list_head delayed_tr_list; + struct list_head delayed_tr_volume_list; + + /* diag buffer support */ + u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; + dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; + u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; + u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 ring_buffer_offset; + u32 ring_buffer_sz; + spinlock_t diag_trigger_lock; + u8 diag_trigger_active; + struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; + struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; + struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; + struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi; +}; + +typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply); + + +/* base shared API */ +extern struct list_head mpt3sas_ioc_list; +void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc); + +int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc); +int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc); +int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type); + +void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid); +__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, + u16 smid); +void mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc); + +/* hi-priority queue */ +u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx); +u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, + struct scsi_cmnd *scmd); + +u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx); +void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle); +void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle); +void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid); +void mpt3sas_base_initialize_callback_handler(void); +u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func); +void mpt3sas_base_release_callback_handler(u8 cb_idx); + +u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply); +u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply); +void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, + u32 phys_addr); + +u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked); + +void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code); +int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, + Mpi2SasIoUnitControlRequest_t *mpi_request); +int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); + +void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, + u32 *event_type); + +void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc); + +void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, + u16 device_missing_delay, u8 io_missing_delay); + +int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc); + + +/* scsih shared API */ +u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, + u32 reply); +void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase); + +int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, + uint channel, uint id, uint lun, u8 type, u16 smid_task, + ulong timeout, unsigned long serial_number, enum mutex_type m_type); +void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); +void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); +void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address); + +struct _sas_node *mpt3sas_scsih_expander_find_by_handle( + struct MPT3SAS_ADAPTER *ioc, u16 handle); +struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address( + struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +struct _sas_device *mpt3sas_scsih_sas_device_find_by_sas_address( + struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + +void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc); + +/* config shared API */ +u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply); +int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, + u8 *num_phys); +int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); +int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page, + u16 sz); +int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage10_t *config_page); + +int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage11_t *config_page); +int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage11_t *config_page); + +int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage2_t *config_page); +int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page); +int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage0_t *config_page); +int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, + u32 form, u32 handle); +int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page, + u32 form, u32 handle); +int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, + u16 sz); +int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, + u16 sz); +int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, + u16 sz); +int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage8_t *config_page); +int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page, + u32 form, u32 handle); +int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page, + u32 phy_number, u16 handle); +int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, + u32 form, u32 handle); +int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); +int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); +int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, + u32 handle); +int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u8 *num_pds); +int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, + u32 handle, u16 sz); +int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, + u32 form, u32 form_specific); +int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle); +int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, + u16 volume_handle, u64 *wwid); + +/* ctl shared API */ +extern struct device_attribute *mpt3sas_host_attrs[]; +extern struct device_attribute *mpt3sas_dev_attrs[]; +void mpt3sas_ctl_init(void); +void mpt3sas_ctl_exit(void); +u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply); +void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase); +u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, + u8 msix_index, u32 reply); +void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply); + +void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, + u8 bits_to_regsiter); +int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset); + +/* transport shared API */ +u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply); +struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, + u16 handle, u64 sas_address); +void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u64 sas_address_parent); +int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy + *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); +int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, + struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, + struct device *parent_dev); +void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate); +extern struct sas_function_template mpt3sas_transport_functions; +extern struct scsi_transport_template *mpt3sas_transport_template; +extern int scsi_internal_device_block(struct scsi_device *sdev); +extern int scsi_internal_device_unblock(struct scsi_device *sdev, + enum scsi_device_state new_state); +/* trigger data externs */ +void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); +void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); +void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, + u32 tigger_bitmask); +void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event, + u16 log_entry_qualifier); +void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, + u8 asc, u8 ascq); +void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, + u32 loginfo); +#endif /* MPT3SAS_BASE_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c new file mode 100644 index 0000000..ce7e59b --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -0,0 +1,1650 @@ +/* + * This module provides common API for accessing firmware configuration pages + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include "mpt3sas_base.h" + +/* local definitions */ + +/* Timeout for config page request (in seconds) */ +#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15 + +/* Common sgl flags for READING a config page. */ +#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT) + +/* Common sgl flags for WRITING a config page. */ +#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \ + << MPI2_SGE_FLAGS_SHIFT) + +/** + * struct config_request - obtain dma memory via routine + * @sz: size + * @page: virt pointer + * @page_dma: phys pointer + * + */ +struct config_request { + u16 sz; + void *page; + dma_addr_t page_dma; +}; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _config_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpful when debugging issues + * in this module. + */ +static void +_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_CONFIG)) + return; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) { + case MPI2_CONFIG_PAGETYPE_IO_UNIT: + desc = "io_unit"; + break; + case MPI2_CONFIG_PAGETYPE_IOC: + desc = "ioc"; + break; + case MPI2_CONFIG_PAGETYPE_BIOS: + desc = "bios"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_VOLUME: + desc = "raid_volume"; + break; + case MPI2_CONFIG_PAGETYPE_MANUFACTURING: + desc = "manufaucturing"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK: + desc = "physdisk"; + break; + case MPI2_CONFIG_PAGETYPE_EXTENDED: + switch (mpi_request->ExtPageType) { + case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT: + desc = "sas_io_unit"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER: + desc = "sas_expander"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE: + desc = "sas_device"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY: + desc = "sas_phy"; + break; + case MPI2_CONFIG_EXTPAGETYPE_LOG: + desc = "log"; + break; + case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE: + desc = "enclosure"; + break; + case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG: + desc = "raid_config"; + break; + case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: + desc = "driver_mappping"; + break; + } + break; + } + + if (!desc) + return; + + pr_info(MPT3SAS_FMT + "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n", + ioc->name, calling_function_name, desc, + mpi_request->Header.PageNumber, mpi_request->Action, + le32_to_cpu(mpi_request->PageAddress), smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + pr_info(MPT3SAS_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); +} +#endif + +/** + * _config_alloc_config_dma_memory - obtain physical memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper for obtaining dma-able memory for config page request. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, + struct config_request *mem) +{ + int r = 0; + + if (mem->sz > ioc->config_page_sz) { + mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz, + &mem->page_dma, GFP_KERNEL); + if (!mem->page) { + pr_err(MPT3SAS_FMT + "%s: dma_alloc_coherent failed asking for (%d) bytes!!\n", + ioc->name, __func__, mem->sz); + r = -ENOMEM; + } + } else { /* use tmp buffer if less than 512 bytes */ + mem->page = ioc->config_page; + mem->page_dma = ioc->config_page_dma; + } + return r; +} + +/** + * _config_free_config_dma_memory - wrapper to free the memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. + * + * Returns 0 for success, non-zero for failure. + */ +static void +_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, + struct config_request *mem) +{ + if (mem->sz > ioc->config_page_sz) + dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page, + mem->page_dma); +} + +/** + * mpt3sas_config_done - config page completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using _config_request. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->config_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->config_cmds.smid != smid) + return 1; + ioc->config_cmds.status |= MPT3_CMD_COMPLETE; + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID; + memcpy(ioc->config_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + } + ioc->config_cmds.status &= ~MPT3_CMD_PENDING; +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_done", mpi_reply); +#endif + ioc->config_cmds.smid = USHRT_MAX; + complete(&ioc->config_cmds.done); + return 1; +} + +/** + * _config_request - main routine for sending config page requests + * @ioc: per adapter object + * @mpi_request: request message frame + * @mpi_reply: reply mf payload returned from firmware + * @timeout: timeout in seconds + * @config_page: contents of the config page + * @config_page_sz: size of config page + * Context: sleep + * + * A generic API for config page requests to firmware. + * + * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->config_cb_idx. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t + *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout, + void *config_page, u16 config_page_sz) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + Mpi2ConfigRequest_t *config_request; + int r; + u8 retry_count, issue_host_reset = 0; + u16 wait_state_count; + struct config_request mem; + u32 ioc_status = UINT_MAX; + + mutex_lock(&ioc->config_cmds.mutex); + if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: config_cmd in use\n", + ioc->name, __func__); + mutex_unlock(&ioc->config_cmds.mutex); + return -EAGAIN; + } + + retry_count = 0; + memset(&mem, 0, sizeof(struct config_request)); + + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + + if (config_page) { + mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request->Header.PageType = mpi_reply->Header.PageType; + mpi_request->Header.PageLength = mpi_reply->Header.PageLength; + mpi_request->ExtPageLength = mpi_reply->ExtPageLength; + mpi_request->ExtPageType = mpi_reply->ExtPageType; + if (mpi_request->Header.PageLength) + mem.sz = mpi_request->Header.PageLength * 4; + else + mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r != 0) + goto out; + if (mpi_request->Action == + MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT || + mpi_request->Action == + MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) { + ioc->base_add_sg_single(&mpi_request->PageBufferSGE, + MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz, + mem.page_dma); + memcpy(mem.page, config_page, min_t(u16, mem.sz, + config_page_sz)); + } else { + memset(config_page, 0, config_page_sz); + ioc->base_add_sg_single(&mpi_request->PageBufferSGE, + MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma); + memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz)); + } + } + + retry_config: + if (retry_count) { + if (retry_count > 2) { /* attempt only 2 retries */ + r = -EFAULT; + goto free_mem; + } + pr_info(MPT3SAS_FMT "%s: attempting retry (%d)\n", + ioc->name, __func__, retry_count); + } + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT3_CMD_NOT_USED; + r = -EFAULT; + goto free_mem; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT3_CMD_NOT_USED; + r = -EAGAIN; + goto free_mem; + } + + r = 0; + memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t)); + ioc->config_cmds.status = MPT3_CMD_PENDING; + config_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->config_cmds.smid = smid; + memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_request", NULL); +#endif + init_completion(&ioc->config_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->config_cmds.done, + timeout*HZ); + if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2ConfigRequest_t)/4); + retry_count++; + if (ioc->config_cmds.smid == smid) + mpt3sas_base_free_smid(ioc, smid); + if ((ioc->shost_recovery) || (ioc->config_cmds.status & + MPT3_CMD_RESET) || ioc->pci_error_recovery) + goto retry_config; + issue_host_reset = 1; + r = -EFAULT; + goto free_mem; + } + + if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) { + memcpy(mpi_reply, ioc->config_cmds.reply, + sizeof(Mpi2ConfigReply_t)); + + /* Reply Frame Sanity Checks to workaround FW issues */ + if ((mpi_request->Header.PageType & 0xF) != + (mpi_reply->Header.PageType & 0xF)) { + _debug_dump_mf(mpi_request, ioc->request_sz/4); + _debug_dump_reply(mpi_reply, ioc->request_sz/4); + panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \ + " mpi_reply mismatch: Requested PageType(0x%02x)" \ + " Reply PageType(0x%02x)\n", \ + ioc->name, __func__, + (mpi_request->Header.PageType & 0xF), + (mpi_reply->Header.PageType & 0xF)); + } + + if (((mpi_request->Header.PageType & 0xF) == + MPI2_CONFIG_PAGETYPE_EXTENDED) && + mpi_request->ExtPageType != mpi_reply->ExtPageType) { + _debug_dump_mf(mpi_request, ioc->request_sz/4); + _debug_dump_reply(mpi_reply, ioc->request_sz/4); + panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \ + " mpi_reply mismatch: Requested ExtPageType(0x%02x)" + " Reply ExtPageType(0x%02x)\n", + ioc->name, __func__, mpi_request->ExtPageType, + mpi_reply->ExtPageType); + } + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) + & MPI2_IOCSTATUS_MASK; + } + + if (retry_count) + pr_info(MPT3SAS_FMT "%s: retry (%d) completed!!\n", \ + ioc->name, __func__, retry_count); + + if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) && + config_page && mpi_request->Action == + MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) { + u8 *p = (u8 *)mem.page; + + /* Config Page Sanity Checks to workaround FW issues */ + if (p) { + if ((mpi_request->Header.PageType & 0xF) != + (p[3] & 0xF)) { + _debug_dump_mf(mpi_request, ioc->request_sz/4); + _debug_dump_reply(mpi_reply, ioc->request_sz/4); + _debug_dump_config(p, min_t(u16, mem.sz, + config_page_sz)/4); + panic(KERN_WARNING MPT3SAS_FMT + "%s: Firmware BUG:" \ + " config page mismatch:" + " Requested PageType(0x%02x)" + " Reply PageType(0x%02x)\n", + ioc->name, __func__, + (mpi_request->Header.PageType & 0xF), + (p[3] & 0xF)); + } + + if (((mpi_request->Header.PageType & 0xF) == + MPI2_CONFIG_PAGETYPE_EXTENDED) && + (mpi_request->ExtPageType != p[6])) { + _debug_dump_mf(mpi_request, ioc->request_sz/4); + _debug_dump_reply(mpi_reply, ioc->request_sz/4); + _debug_dump_config(p, min_t(u16, mem.sz, + config_page_sz)/4); + panic(KERN_WARNING MPT3SAS_FMT + "%s: Firmware BUG:" \ + " config page mismatch:" + " Requested ExtPageType(0x%02x)" + " Reply ExtPageType(0x%02x)\n", + ioc->name, __func__, + mpi_request->ExtPageType, p[6]); + } + } + memcpy(config_page, mem.page, min_t(u16, mem.sz, + config_page_sz)); + } + + free_mem: + if (config_page) + _config_free_config_dma_memory(ioc, &mem); + out: + ioc->config_cmds.status = MPT3_CMD_NOT_USED; + mutex_unlock(&ioc->config_cmds.mutex); + + if (issue_host_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + return r; +} + +/** + * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page, + u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 7; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sz); + out: + return r; +} + +/** + * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage10_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 10; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage11_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 11; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, + struct Mpi2ManufacturingPage11_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 11; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_bios_pg2 - obtain bios page 2 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 2; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_bios_pg3 - obtain bios page 3 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 3; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_iounit_pg1 - set iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; + mpi_request.Header.PageNumber = 8; + mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, + u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page, + u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION; + mpi_request.Header.PageNumber = 1; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host + * @ioc: per adapter object + * @num_phys: pointer returned with the number of phys + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + u16 ioc_status; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t config_page; + + *num_phys = 0; + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page, + sizeof(Mpi2SasIOUnitPage0_t)); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) + *num_phys = config_page.NumPhys; + } + out: + return r; +} + +/** + * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, + u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + out: + return r; +} + +/** + * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, + u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + out: + return r; +} + +/** + * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, + u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + out: + return r; +} + +/** + * mpt3sas_config_get_expander_pg0 - obtain expander page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_expander_pg1 - obtain expander page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, + u16 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | + (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_phy_pg0 - obtain phy page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_phy_pg1 - obtain phy page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, + u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume + * @ioc: per adapter object + * @handle: volume handle + * @num_pds: returns pds count + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u8 *num_pds) +{ + Mpi2ConfigRequest_t mpi_request; + Mpi2RaidVolPage0_t config_page; + Mpi2ConfigReply_t mpi_reply; + int r; + u16 ioc_status; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + *num_pds = 0; + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page, + sizeof(Mpi2RaidVolPage0_t)); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) + *num_pds = config_page.NumPhysDisks; + } + + out: + return r; +} + +/** + * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, + u32 handle, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); + out: + return r; +} + +/** + * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE + * @form_specific: specific to the form + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | form_specific); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_get_volume_handle - returns volume handle for give hidden + * raid components + * @ioc: per adapter object + * @pd_handle: phys disk handle + * @volume_handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle) +{ + Mpi2RaidConfigurationPage0_t *config_page = NULL; + Mpi2ConfigRequest_t mpi_request; + Mpi2ConfigReply_t mpi_reply; + int r, i, config_page_sz; + u16 ioc_status; + int config_num; + u16 element_type; + u16 phys_disk_dev_handle; + + *volume_handle = 0; + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG; + mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4); + config_page = kmalloc(config_page_sz, GFP_KERNEL); + if (!config_page) { + r = -1; + goto out; + } + + config_num = 0xff; + while (1) { + mpi_request.PageAddress = cpu_to_le32(config_num + + MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + config_page_sz); + if (r) + goto out; + r = -1; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < config_page->NumElements; i++) { + element_type = le16_to_cpu(config_page-> + ConfigElement[i].ElementFlags) & + MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE; + if (element_type == + MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT || + element_type == + MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) { + phys_disk_dev_handle = + le16_to_cpu(config_page->ConfigElement[i]. + PhysDiskDevHandle); + if (phys_disk_dev_handle == pd_handle) { + *volume_handle = + le16_to_cpu(config_page-> + ConfigElement[i].VolDevHandle); + r = 0; + goto out; + } + } else if (element_type == + MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) { + *volume_handle = 0; + r = 0; + goto out; + } + } + config_num = config_page->ConfigNum; + } + out: + kfree(config_page); + return r; +} + +/** + * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle + * @ioc: per adapter object + * @volume_handle: volume handle + * @wwid: volume wwid + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2RaidVolPage1_t raid_vol_pg1; + + *wwid = 0; + if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, + volume_handle))) { + *wwid = le64_to_cpu(raid_vol_pg1.WWID); + return 0; + } else + return -1; +} diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c new file mode 100644 index 0000000..8af944d --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -0,0 +1,3297 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/compat.h> +#include <linux/poll.h> + +#include <linux/io.h> +#include <linux/uaccess.h> + +#include "mpt3sas_base.h" +#include "mpt3sas_ctl.h" + + +static struct fasync_struct *async_queue; +static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); + + +/** + * enum block_state - blocking state + * @NON_BLOCKING: non blocking + * @BLOCKING: blocking + * + * These states are for ioctls that need to wait for a response + * from firmware, so they probably require sleep. + */ +enum block_state { + NON_BLOCKING, + BLOCKING, +}; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _ctl_sas_device_find_by_handle - sas device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +static struct _sas_device * +_ctl_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + + out: + return r; +} + +/** + * _ctl_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpful when debugging issues + * in this module. + */ +static void +_ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_IOCTL)) + return; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "scsi_io, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + desc = "task_mgmt"; + break; + case MPI2_FUNCTION_IOC_INIT: + desc = "ioc_init"; + break; + case MPI2_FUNCTION_IOC_FACTS: + desc = "ioc_facts"; + break; + case MPI2_FUNCTION_CONFIG: + { + Mpi2ConfigRequest_t *config_request = + (Mpi2ConfigRequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "config, type(0x%02x), ext_type(0x%02x), number(%d)", + (config_request->Header.PageType & + MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType, + config_request->Header.PageNumber); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_PORT_FACTS: + desc = "port_facts"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + desc = "port_enable"; + break; + case MPI2_FUNCTION_EVENT_NOTIFICATION: + desc = "event_notification"; + break; + case MPI2_FUNCTION_FW_DOWNLOAD: + desc = "fw_download"; + break; + case MPI2_FUNCTION_FW_UPLOAD: + desc = "fw_upload"; + break; + case MPI2_FUNCTION_RAID_ACTION: + desc = "raid_action"; + break; + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "raid_pass, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + desc = "sas_iounit_cntl"; + break; + case MPI2_FUNCTION_SATA_PASSTHROUGH: + desc = "sata_pass"; + break; + case MPI2_FUNCTION_DIAG_BUFFER_POST: + desc = "diag_buffer_post"; + break; + case MPI2_FUNCTION_DIAG_RELEASE: + desc = "diag_release"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + desc = "smp_passthrough"; + break; + } + + if (!desc) + return; + + pr_info(MPT3SAS_FMT "%s: %s, smid(%d)\n", + ioc->name, calling_function_name, desc, smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + pr_info(MPT3SAS_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + Mpi2SCSIIOReply_t *scsi_reply = + (Mpi2SCSIIOReply_t *)mpi_reply; + struct _sas_device *sas_device = NULL; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _ctl_sas_device_find_by_handle(ioc, + le16_to_cpu(scsi_reply->DevHandle)); + if (sas_device) { + pr_warn(MPT3SAS_FMT "\tsas_address(0x%016llx), phy(%d)\n", + ioc->name, (unsigned long long) + sas_device->sas_address, sas_device->phy); + pr_warn(MPT3SAS_FMT + "\tenclosure_logical_id(0x%016llx), slot(%d)\n", + ioc->name, (unsigned long long) + sas_device->enclosure_logical_id, sas_device->slot); + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (scsi_reply->SCSIState || scsi_reply->SCSIStatus) + pr_info(MPT3SAS_FMT + "\tscsi_state(0x%02x), scsi_status" + "(0x%02x)\n", ioc->name, + scsi_reply->SCSIState, + scsi_reply->SCSIStatus); + } +} + +#endif + +/** + * mpt3sas_ctl_done - ctl module completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using ioc->ctl_cb_idx. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + Mpi2SCSIIOReply_t *scsiio_reply; + const void *sense_data; + u32 sz; + + if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->ctl_cmds.smid != smid) + return 1; + ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE; + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID; + /* get sense data */ + if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_reply->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply; + if (scsiio_reply->SCSIState & + MPI2_SCSI_STATE_AUTOSENSE_VALID) { + sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, + le32_to_cpu(scsiio_reply->SenseCount)); + sense_data = mpt3sas_base_get_sense_buffer(ioc, + smid); + memcpy(ioc->ctl_cmds.sense, sense_data, sz); + } + } + } +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply); +#endif + ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING; + complete(&ioc->ctl_cmds.done); + return 1; +} + +/** + * _ctl_check_event_type - determines when an event needs logging + * @ioc: per adapter object + * @event: firmware event + * + * The bitmask in ioc->event_type[] indicates which events should be + * be saved in the driver event_log. This bitmask is set by application. + * + * Returns 1 when event should be captured, or zero means no match. + */ +static int +_ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event) +{ + u16 i; + u32 desired_event; + + if (event >= 128 || !event || !ioc->event_log) + return 0; + + desired_event = (1 << (event % 32)); + if (!desired_event) + desired_event = 1; + i = event / 32; + return desired_event & ioc->event_type[i]; +} + +/** + * mpt3sas_ctl_add_to_event_log - add event + * @ioc: per adapter object + * @mpi_reply: reply message frame + * + * Return nothing. + */ +void +mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + struct MPT3_IOCTL_EVENTS *event_log; + u16 event; + int i; + u32 sz, event_data_sz; + u8 send_aen = 0; + + if (!ioc->event_log) + return; + + event = le16_to_cpu(mpi_reply->Event); + + if (_ctl_check_event_type(ioc, event)) { + + /* insert entry into circular event_log */ + i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE; + event_log = ioc->event_log; + event_log[i].event = event; + event_log[i].context = ioc->event_context++; + + event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4; + sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE); + memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE); + memcpy(event_log[i].data, mpi_reply->EventData, sz); + send_aen = 1; + } + + /* This aen_event_read_flag flag is set until the + * application has read the event log. + * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify. + */ + if (event == MPI2_EVENT_LOG_ENTRY_ADDED || + (send_aen && !ioc->aen_event_read_flag)) { + ioc->aen_event_read_flag = 1; + wake_up_interruptible(&ctl_poll_wait); + if (async_queue) + kill_fasync(&async_queue, SIGIO, POLL_IN); + } +} + +/** + * mpt3sas_ctl_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, + u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + mpt3sas_ctl_add_to_event_log(ioc, mpi_reply); + return 1; +} + +/** + * _ctl_verify_adapter - validates ioc_number passed from application + * @ioc: per adapter object + * @iocpp: The ioc pointer is returned in this. + * + * Return (-1) means error, else ioc_number. + */ +static int +_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp) +{ + struct MPT3SAS_ADAPTER *ioc; + + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) { + if (ioc->id != ioc_number) + continue; + *iocpp = ioc; + return ioc_number; + } + *iocpp = NULL; + return -1; +} + +/** + * mpt3sas_ctl_reset_handler - reset callback handler (for ctl) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET, + * MPT3_IOC_DONE_RESET + */ +void +mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase) +{ + int i; + u8 issue_reset; + + switch (reset_phase) { + case MPT3_IOC_PRE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__)); + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_RELEASED)) + continue; + mpt3sas_send_diag_release(ioc, i, &issue_reset); + } + break; + case MPT3_IOC_AFTER_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) { + ioc->ctl_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid); + complete(&ioc->ctl_cmds.done); + } + break; + case MPT3_IOC_DONE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__)); + + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_RELEASED)) + continue; + ioc->diag_buffer_status[i] |= + MPT3_DIAG_BUFFER_IS_DIAG_RESET; + } + break; + } +} + +/** + * _ctl_fasync - + * @fd - + * @filep - + * @mode - + * + * Called when application request fasyn callback handler. + */ +static int +_ctl_fasync(int fd, struct file *filep, int mode) +{ + return fasync_helper(fd, filep, mode, &async_queue); +} + +/** + * _ctl_release - + * @inode - + * @filep - + * + * Called when application releases the fasyn callback handler. + */ +static int +_ctl_release(struct inode *inode, struct file *filep) +{ + return fasync_helper(-1, filep, 0, &async_queue); +} + +/** + * _ctl_poll - + * @file - + * @wait - + * + */ +static unsigned int +_ctl_poll(struct file *filep, poll_table *wait) +{ + struct MPT3SAS_ADAPTER *ioc; + + poll_wait(filep, &ctl_poll_wait, wait); + + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) { + if (ioc->aen_event_read_flag) + return POLLIN | POLLRDNORM; + } + return 0; +} + +/** + * _ctl_set_task_mid - assign an active smid to tm request + * @ioc: per adapter object + * @karg - (struct mpt3_ioctl_command) + * @tm_request - pointer to mf from user space + * + * Returns 0 when an smid if found, else fail. + * during failure, the reply frame is filled. + */ +static int +_ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg, + Mpi2SCSITaskManagementRequest_t *tm_request) +{ + u8 found = 0; + u16 i; + u16 handle; + struct scsi_cmnd *scmd; + struct MPT3SAS_DEVICE *priv_data; + unsigned long flags; + Mpi2SCSITaskManagementReply_t *tm_reply; + u32 sz; + u32 lun; + char *desc = NULL; + + if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) + desc = "abort_task"; + else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) + desc = "query_task"; + else + return 0; + + lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN); + + handle = le16_to_cpu(tm_request->DevHandle); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = ioc->scsiio_depth; i && !found; i--) { + scmd = ioc->scsi_lookup[i - 1].scmd; + if (scmd == NULL || scmd->device == NULL || + scmd->device->hostdata == NULL) + continue; + if (lun != scmd->device->lun) + continue; + priv_data = scmd->device->hostdata; + if (priv_data->sas_target == NULL) + continue; + if (priv_data->sas_target->handle != handle) + continue; + tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid); + found = 1; + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!found) { + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), lun(%d), no active mid!!\n", + ioc->name, + desc, le16_to_cpu(tm_request->DevHandle), lun)); + tm_reply = ioc->ctl_cmds.reply; + tm_reply->DevHandle = tm_request->DevHandle; + tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + tm_reply->TaskType = tm_request->TaskType; + tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4; + tm_reply->VP_ID = tm_request->VP_ID; + tm_reply->VF_ID = tm_request->VF_ID; + sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + return 1; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name, + desc, le16_to_cpu(tm_request->DevHandle), lun, + le16_to_cpu(tm_request->TaskMID))); + return 0; +} + +/** + * _ctl_do_mpt_command - main handler for MPT3COMMAND opcode + * @ioc: per adapter object + * @karg - (struct mpt3_ioctl_command) + * @mf - pointer to mf in user space + */ +static long +_ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, + void __user *mf) +{ + MPI2RequestHeader_t *mpi_request = NULL, *request; + MPI2DefaultReply_t *mpi_reply; + u32 ioc_state; + u16 ioc_status; + u16 smid; + unsigned long timeout, timeleft; + u8 issue_reset; + u32 sz; + void *psge; + void *data_out = NULL; + dma_addr_t data_out_dma = 0; + size_t data_out_sz = 0; + void *data_in = NULL; + dma_addr_t data_in_dma = 0; + size_t data_in_sz = 0; + long ret; + u16 wait_state_count; + + issue_reset = 0; + + if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ret = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL); + if (!mpi_request) { + pr_err(MPT3SAS_FMT + "%s: failed obtaining a memory for mpi_request\n", + ioc->name, __func__); + ret = -ENOMEM; + goto out; + } + + /* Check for overflow and wraparound */ + if (karg.data_sge_offset * 4 > ioc->request_sz || + karg.data_sge_offset > (UINT_MAX / 4)) { + ret = -EINVAL; + goto out; + } + + /* copy in request message frame from user */ + if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__, + __func__); + ret = -EFAULT; + goto out; + } + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { + smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + } else { + + smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + } + + ret = 0; + ioc->ctl_cmds.status = MPT3_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + request = mpt3sas_base_get_msg_frame(ioc, smid); + memcpy(request, mpi_request, karg.data_sge_offset*4); + ioc->ctl_cmds.smid = smid; + data_out_sz = karg.data_out_size; + data_in_sz = karg.data_in_size; + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + if (!le16_to_cpu(mpi_request->FunctionDependent1) || + le16_to_cpu(mpi_request->FunctionDependent1) > + ioc->facts.MaxDevHandle) { + ret = -EINVAL; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + } + + /* obtain dma-able memory for data transfer */ + if (data_out_sz) /* WRITE */ { + data_out = pci_alloc_consistent(ioc->pdev, data_out_sz, + &data_out_dma); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + if (copy_from_user(data_out, karg.data_out_buf_ptr, + data_out_sz)) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -EFAULT; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + } + + if (data_in_sz) /* READ */ { + data_in = pci_alloc_consistent(ioc->pdev, data_in_sz, + &data_in_dma); + if (!data_in) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + } + + psge = (void *)request + (karg.data_sge_offset*4); + + /* send command to firmware */ +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_request", NULL); +#endif + + init_completion(&ioc->ctl_cmds.done); + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsiio_request = + (Mpi2SCSIIORequest_t *)request; + scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; + scsiio_request->SenseBufferLowAddress = + mpt3sas_base_get_sense_buffer_dma(ioc, smid); + memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE); + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, + data_in_dma, data_in_sz); + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) + mpt3sas_base_put_smid_scsi_io(ioc, smid, + le16_to_cpu(mpi_request->FunctionDependent1)); + else + mpt3sas_base_put_smid_default(ioc, smid); + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)request; + + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n", + ioc->name, + le16_to_cpu(tm_request->DevHandle), tm_request->TaskType)); + + if (tm_request->TaskType == + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK || + tm_request->TaskType == + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) { + if (_ctl_set_task_mid(ioc, &karg, tm_request)) { + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + } + + mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, + data_in_dma, data_in_sz); + mpt3sas_base_put_smid_hi_priority(ioc, smid); + break; + } + case MPI2_FUNCTION_SMP_PASSTHROUGH: + { + Mpi2SmpPassthroughRequest_t *smp_request = + (Mpi2SmpPassthroughRequest_t *)mpi_request; + u8 *data; + + /* ioc determines which port to use */ + smp_request->PhysicalPort = 0xFF; + if (smp_request->PassthroughFlags & + MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE) + data = (u8 *)&smp_request->SGL; + else { + if (unlikely(data_out == NULL)) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + mpt3sas_base_free_smid(ioc, smid); + ret = -EINVAL; + goto out; + } + data = data_out; + } + + if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, + data_in_sz); + mpt3sas_base_put_smid_default(ioc, smid); + break; + } + case MPI2_FUNCTION_SATA_PASSTHROUGH: + case MPI2_FUNCTION_FW_DOWNLOAD: + case MPI2_FUNCTION_FW_UPLOAD: + { + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, + data_in_sz); + mpt3sas_base_put_smid_default(ioc, smid); + break; + } + case MPI2_FUNCTION_TOOLBOX: + { + Mpi2ToolboxCleanRequest_t *toolbox_request = + (Mpi2ToolboxCleanRequest_t *)mpi_request; + + if (toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL) { + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, + data_in_dma, data_in_sz); + } else { + ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, + data_in_dma, data_in_sz); + } + mpt3sas_base_put_smid_default(ioc, smid); + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + { + Mpi2SasIoUnitControlRequest_t *sasiounit_request = + (Mpi2SasIoUnitControlRequest_t *)mpi_request; + + if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET + || sasiounit_request->Operation == + MPI2_SAS_OP_PHY_LINK_RESET) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + /* drop to default case for posting the request */ + } + default: + ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, + data_in_dma, data_in_sz); + mpt3sas_base_put_smid_default(ioc, smid); + break; + } + + if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT) + timeout = MPT3_IOCTL_DEFAULT_TIMEOUT; + else + timeout = karg.timeout; + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + timeout*HZ); + if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)mpi_request; + mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT); + } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH || + mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) && + ioc->ioc_link_reset_in_progress) { + ioc->ioc_link_reset_in_progress = 0; + ioc->ignore_loginfos = 0; + } + if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, karg.data_sge_offset); + if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT && + (ioc->logging_level & MPT_DEBUG_TM)) { + Mpi2SCSITaskManagementReply_t *tm_reply = + (Mpi2SCSITaskManagementReply_t *)mpi_reply; + + pr_info(MPT3SAS_FMT "TASK_MGMT: " \ + "IOCStatus(0x%04x), IOCLogInfo(0x%08x), " + "TerminationCount(0x%08x)\n", ioc->name, + le16_to_cpu(tm_reply->IOCStatus), + le32_to_cpu(tm_reply->IOCLogInfo), + le32_to_cpu(tm_reply->TerminationCount)); + } +#endif + /* copy out xdata to user */ + if (data_in_sz) { + if (copy_to_user(karg.data_in_buf_ptr, data_in, + data_in_sz)) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out reply message frame to user */ + if (karg.max_reply_bytes) { + sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out sense to user */ + if (karg.max_sense_bytes && (mpi_request->Function == + MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE); + if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense, + sz)) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + issue_host_reset: + if (issue_reset) { + ret = -ENODATA; + if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) { + pr_info(MPT3SAS_FMT "issue target reset: handle = (0x%04x)\n", + ioc->name, + le16_to_cpu(mpi_request->FunctionDependent1)); + mpt3sas_halt_firmware(ioc); + mpt3sas_scsih_issue_tm(ioc, + le16_to_cpu(mpi_request->FunctionDependent1), 0, 0, + 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30, + 0, TM_MUTEX_ON); + } else + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + } + + out: + + /* free memory associated with sg buffers */ + if (data_in) + pci_free_consistent(ioc->pdev, data_in_sz, data_in, + data_in_dma); + + if (data_out) + pci_free_consistent(ioc->pdev, data_out_sz, data_out, + data_out_dma); + + kfree(mpi_request); + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + return ret; +} + +/** + * _ctl_getiocinfo - main handler for MPT3IOCINFO opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_iocinfo karg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + memset(&karg, 0 , sizeof(karg)); + karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3; + if (ioc->pfacts) + karg.port_number = ioc->pfacts[0].PortNumber; + karg.hw_rev = ioc->pdev->revision; + karg.pci_id = ioc->pdev->device; + karg.subsystem_device = ioc->pdev->subsystem_device; + karg.subsystem_vendor = ioc->pdev->subsystem_vendor; + karg.pci_information.u.bits.bus = ioc->pdev->bus->number; + karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn); + karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); + karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); + karg.firmware_version = ioc->facts.FWVersion.Word; + strcpy(karg.driver_version, MPT3SAS_DRIVER_NAME); + strcat(karg.driver_version, "-"); + strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION); + karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventquery - main handler for MPT3EVENTQUERY opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_eventquery karg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE; + memcpy(karg.event_types, ioc->event_type, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventenable - main handler for MPT3EVENTENABLE opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_eventenable karg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + memcpy(ioc->event_type, karg.event_types, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + mpt3sas_base_validate_event_type(ioc, ioc->event_type); + + if (ioc->event_log) + return 0; + /* initialize event_log */ + ioc->event_context = 0; + ioc->aen_event_read_flag = 0; + ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE, + sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL); + if (!ioc->event_log) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENOMEM; + } + return 0; +} + +/** + * _ctl_eventreport - main handler for MPT3EVENTREPORT opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_eventreport karg; + u32 number_bytes, max_events, max; + struct mpt3_ioctl_eventreport __user *uarg = arg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + number_bytes = karg.hdr.max_data_size - + sizeof(struct mpt3_ioctl_header); + max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS); + max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events); + + /* If fewer than 1 event is requested, there must have + * been some type of error. + */ + if (!max || !ioc->event_log) + return -ENODATA; + + number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS); + if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + /* reset flag so SIGIO can restart */ + ioc->aen_event_read_flag = 0; + return 0; +} + +/** + * _ctl_do_reset - main handler for MPT3HARDRESET opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_diag_reset karg; + int retval; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (ioc->shost_recovery || ioc->pci_error_recovery || + ioc->is_driver_loading) + return -EAGAIN; + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + pr_info(MPT3SAS_FMT "host reset: %s\n", + ioc->name, ((!retval) ? "SUCCESS" : "FAILED")); + return 0; +} + +/** + * _ctl_btdh_search_sas_device - searching for sas device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc, + struct mpt3_ioctl_btdh_mapping *btdh) +{ + struct _sas_device *sas_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->sas_device_list)) + return rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == sas_device->handle) { + btdh->bus = sas_device->channel; + btdh->id = sas_device->id; + rc = 1; + goto out; + } else if (btdh->bus == sas_device->channel && btdh->id == + sas_device->id && btdh->handle == 0xFFFF) { + btdh->handle = sas_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_search_raid_device - searching for raid device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc, + struct mpt3_ioctl_btdh_mapping *btdh) +{ + struct _raid_device *raid_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->raid_device_list)) + return rc; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == raid_device->handle) { + btdh->bus = raid_device->channel; + btdh->id = raid_device->id; + rc = 1; + goto out; + } else if (btdh->bus == raid_device->channel && btdh->id == + raid_device->id && btdh->handle == 0xFFFF) { + btdh->handle = raid_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_ioctl_btdh_mapping karg; + int rc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + rc = _ctl_btdh_search_sas_device(ioc, &karg); + if (!rc) + _ctl_btdh_search_raid_device(ioc, &karg); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_diag_capability - return diag buffer capability + * @ioc: per adapter object + * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED + * + * returns 1 when diag buffer support is enabled in firmware + */ +static u8 +_ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type) +{ + u8 rc = 0; + + switch (buffer_type) { + case MPI2_DIAG_BUF_TYPE_TRACE: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) + rc = 1; + break; + case MPI2_DIAG_BUF_TYPE_SNAPSHOT: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) + rc = 1; + break; + case MPI2_DIAG_BUF_TYPE_EXTENDED: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) + rc = 1; + } + + return rc; +} + + +/** + * _ctl_diag_register_2 - wrapper for registering diag buffer support + * @ioc: per adapter object + * @diag_register: the diag_register struct passed in from user space + * + */ +static long +_ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc, + struct mpt3_diag_register *diag_register) +{ + int rc, i; + void *request_data = NULL; + dma_addr_t request_data_dma; + u32 request_data_sz = 0; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u32 ioc_state; + u8 issue_reset = 0; + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + buffer_type = diag_register->buffer_type; + if (!_ctl_diag_capability(ioc, buffer_type)) { + pr_err(MPT3SAS_FMT + "%s: doesn't have capability for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) { + pr_err(MPT3SAS_FMT + "%s: already has a registered buffer for buffer_type(0x%02x)\n", + ioc->name, __func__, + buffer_type); + return -EINVAL; + } + + if (diag_register->requested_buffer_size % 4) { + pr_err(MPT3SAS_FMT + "%s: the requested_buffer_size is not 4 byte aligned\n", + ioc->name, __func__); + return -EINVAL; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT3_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + request_data = ioc->diag_buffer[buffer_type]; + request_data_sz = diag_register->requested_buffer_size; + ioc->unique_id[buffer_type] = diag_register->unique_id; + ioc->diag_buffer_status[buffer_type] = 0; + memcpy(ioc->product_specific[buffer_type], + diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS); + ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags; + + if (request_data) { + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) { + pci_free_consistent(ioc->pdev, + ioc->diag_buffer_sz[buffer_type], + request_data, request_data_dma); + request_data = NULL; + } + } + + if (request_data == NULL) { + ioc->diag_buffer_sz[buffer_type] = 0; + ioc->diag_buffer_dma[buffer_type] = 0; + request_data = pci_alloc_consistent( + ioc->pdev, request_data_sz, &request_data_dma); + if (request_data == NULL) { + pr_err(MPT3SAS_FMT "%s: failed allocating memory" \ + " for diag buffers, requested size(%d)\n", + ioc->name, __func__, request_data_sz); + mpt3sas_base_free_smid(ioc, smid); + return -ENOMEM; + } + ioc->diag_buffer[buffer_type] = request_data; + ioc->diag_buffer_sz[buffer_type] = request_data_sz; + ioc->diag_buffer_dma[buffer_type] = request_data_dma; + } + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = diag_register->buffer_type; + mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags); + mpi_request->BufferAddress = cpu_to_le64(request_data_dma); + mpi_request->BufferLength = cpu_to_le32(request_data_sz); + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n", + ioc->name, __func__, request_data, + (unsigned long long)request_data_dma, + le32_to_cpu(mpi_request->BufferLength))); + + for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + + init_completion(&ioc->ctl_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) { + pr_err(MPT3SAS_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT3_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n", + ioc->name, __func__)); + } else { + pr_info(MPT3SAS_FMT + "%s: ioc_status(0x%04x) log_info(0x%08x)\n", + ioc->name, __func__, + ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + if (rc && request_data) + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + return rc; +} + +/** + * mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time + * @ioc: per adapter object + * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1 + * + * This is called when command line option diag_buffer_enable is enabled + * at driver load time. + */ +void +mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register) +{ + struct mpt3_diag_register diag_register; + + memset(&diag_register, 0, sizeof(struct mpt3_diag_register)); + + if (bits_to_register & 1) { + pr_info(MPT3SAS_FMT "registering trace buffer support\n", + ioc->name); + ioc->diag_trigger_master.MasterData = + (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); + diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE; + /* register for 2MB buffers */ + diag_register.requested_buffer_size = 2 * (1024 * 1024); + diag_register.unique_id = 0x7075900; + _ctl_diag_register_2(ioc, &diag_register); + } + + if (bits_to_register & 2) { + pr_info(MPT3SAS_FMT "registering snapshot buffer support\n", + ioc->name); + diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT; + /* register for 2MB buffers */ + diag_register.requested_buffer_size = 2 * (1024 * 1024); + diag_register.unique_id = 0x7075901; + _ctl_diag_register_2(ioc, &diag_register); + } + + if (bits_to_register & 4) { + pr_info(MPT3SAS_FMT "registering extended buffer support\n", + ioc->name); + diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED; + /* register for 2MB buffers */ + diag_register.requested_buffer_size = 2 * (1024 * 1024); + diag_register.unique_id = 0x7075901; + _ctl_diag_register_2(ioc, &diag_register); + } +} + +/** + * _ctl_diag_register - application register with driver + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +static long +_ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_diag_register karg; + long rc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + rc = _ctl_diag_register_2(ioc, &karg); + return rc; +} + +/** + * _ctl_diag_unregister - application unregister with driver + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +static long +_ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_diag_unregister karg; + void *request_data; + dma_addr_t request_data_dma; + u32 request_data_sz; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + pr_err(MPT3SAS_FMT + "%s: doesn't have capability for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) is not registered\n", + ioc->name, __func__, buffer_type); + return -EINVAL; + } + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_RELEASED) == 0) { + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) has not been released\n", + ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + pr_err(MPT3SAS_FMT + "%s: unique_id(0x%08x) is not registered\n", + ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + pr_err(MPT3SAS_FMT + "%s: doesn't have memory allocated for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + request_data_sz = ioc->diag_buffer_sz[buffer_type]; + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + ioc->diag_buffer[buffer_type] = NULL; + ioc->diag_buffer_status[buffer_type] = 0; + return 0; +} + +/** + * _ctl_diag_query - query relevant info associated with diag buffers + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +static long +_ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_diag_query karg; + void *request_data; + int i; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + karg.application_flags = 0; + buffer_type = karg.buffer_type; + + if (!_ctl_diag_capability(ioc, buffer_type)) { + pr_err(MPT3SAS_FMT + "%s: doesn't have capability for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) is not registered\n", + ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id & 0xffffff00) { + if (karg.unique_id != ioc->unique_id[buffer_type]) { + pr_err(MPT3SAS_FMT + "%s: unique_id(0x%08x) is not registered\n", + ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + pr_err(MPT3SAS_FMT + "%s: doesn't have buffer for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if (ioc->diag_buffer_status[buffer_type] & MPT3_DIAG_BUFFER_IS_RELEASED) + karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED | + MPT3_APP_FLAGS_BUFFER_VALID); + else + karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED | + MPT3_APP_FLAGS_BUFFER_VALID | + MPT3_APP_FLAGS_FW_BUFFER_ACCESS); + + for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++) + karg.product_specific[i] = + ioc->product_specific[buffer_type][i]; + + karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type]; + karg.driver_added_buffer_size = 0; + karg.unique_id = ioc->unique_id[buffer_type]; + karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type]; + + if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) { + pr_err(MPT3SAS_FMT + "%s: unable to write mpt3_diag_query data @ %p\n", + ioc->name, __func__, arg); + return -EFAULT; + } + return 0; +} + +/** + * mpt3sas_send_diag_release - Diag Release Message + * @ioc: per adapter object + * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED + * @issue_reset - specifies whether host reset is required. + * + */ +int +mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset) +{ + Mpi2DiagReleaseRequest_t *mpi_request; + Mpi2DiagReleaseReply_t *mpi_reply; + u16 smid; + u16 ioc_status; + u32 ioc_state; + int rc; + unsigned long timeleft; + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + rc = 0; + *issue_reset = 0; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) + ioc->diag_buffer_status[buffer_type] |= + MPT3_DIAG_BUFFER_IS_RELEASED; + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: skipping due to FAULT state\n", ioc->name, + __func__)); + rc = -EAGAIN; + goto out; + } + + if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + ioc->ctl_cmds.status = MPT3_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE; + mpi_request->BufferType = buffer_type; + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + + init_completion(&ioc->ctl_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagReleaseRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET)) + *issue_reset = 1; + rc = -EFAULT; + goto out; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) { + pr_err(MPT3SAS_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT3_DIAG_BUFFER_IS_RELEASED; + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n", + ioc->name, __func__)); + } else { + pr_info(MPT3SAS_FMT + "%s: ioc_status(0x%04x) log_info(0x%08x)\n", + ioc->name, __func__, + ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); + rc = -EFAULT; + } + + out: + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + return rc; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_diag_release karg; + void *request_data; + int rc; + u8 buffer_type; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + pr_err(MPT3SAS_FMT + "%s: doesn't have capability for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) is not registered\n", + ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + pr_err(MPT3SAS_FMT + "%s: unique_id(0x%08x) is not registered\n", + ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_RELEASED) { + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) is already released\n", + ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + pr_err(MPT3SAS_FMT + "%s: doesn't have memory allocated for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + /* buffers were released by due to host reset */ + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_DIAG_RESET)) { + ioc->diag_buffer_status[buffer_type] |= + MPT3_DIAG_BUFFER_IS_RELEASED; + ioc->diag_buffer_status[buffer_type] &= + ~MPT3_DIAG_BUFFER_IS_DIAG_RESET; + pr_err(MPT3SAS_FMT + "%s: buffer_type(0x%02x) was released due to host reset\n", + ioc->name, __func__, buffer_type); + return 0; + } + + rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset); + + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + return rc; +} + +/** + * _ctl_diag_read_buffer - request for copy of the diag buffer + * @ioc: per adapter object + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_diag_read_buffer karg; + struct mpt3_diag_read_buffer __user *uarg = arg; + void *request_data, *diag_data; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + int rc, i; + u8 buffer_type; + unsigned long timeleft, request_size, copy_size; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + pr_err(MPT3SAS_FMT + "%s: doesn't have capability for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + pr_err(MPT3SAS_FMT + "%s: unique_id(0x%08x) is not registered\n", + ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + pr_err(MPT3SAS_FMT + "%s: doesn't have buffer for buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + request_size = ioc->diag_buffer_sz[buffer_type]; + + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { + pr_err(MPT3SAS_FMT "%s: either the starting_offset " \ + "or bytes_to_read are not 4 byte aligned\n", ioc->name, + __func__); + return -EINVAL; + } + + if (karg.starting_offset > request_size) + return -EINVAL; + + diag_data = (void *)(request_data + karg.starting_offset); + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: diag_buffer(%p), offset(%d), sz(%d)\n", + ioc->name, __func__, + diag_data, karg.starting_offset, karg.bytes_to_read)); + + /* Truncate data on requests that are too large */ + if ((diag_data + karg.bytes_to_read < diag_data) || + (diag_data + karg.bytes_to_read > request_data + request_size)) + copy_size = request_size - karg.starting_offset; + else + copy_size = karg.bytes_to_read; + + if (copy_to_user((void __user *)uarg->diagnostic_data, + diag_data, copy_size)) { + pr_err(MPT3SAS_FMT + "%s: Unable to write mpt_diag_read_buffer_t data @ %p\n", + ioc->name, __func__, diag_data); + return -EFAULT; + } + + if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0) + return 0; + + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: Reregister buffer_type(0x%02x)\n", + ioc->name, __func__, buffer_type)); + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_RELEASED) == 0) { + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "%s: buffer_type(0x%02x) is still registered\n", + ioc->name, __func__, buffer_type)); + return 0; + } + /* Get a free request frame and save the message context. + */ + + if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT3_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = buffer_type; + mpi_request->BufferLength = + cpu_to_le32(ioc->diag_buffer_sz[buffer_type]); + mpi_request->BufferAddress = + cpu_to_le64(ioc->diag_buffer_dma[buffer_type]); + for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + + init_completion(&ioc->ctl_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT3_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) { + pr_err(MPT3SAS_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT3_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n", + ioc->name, __func__)); + } else { + pr_info(MPT3SAS_FMT + "%s: ioc_status(0x%04x) log_info(0x%08x)\n", + ioc->name, __func__, + ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + return rc; +} + + + +#ifdef CONFIG_COMPAT +/** + * _ctl_compat_mpt_command - convert 32bit pointers to 64bit. + * @ioc: per adapter object + * @cmd - ioctl opcode + * @arg - (struct mpt3_ioctl_command32) + * + * MPT3COMMAND32 - Handle 32bit applications running on 64bit os. + */ +static long +_ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd, + void __user *arg) +{ + struct mpt3_ioctl_command32 karg32; + struct mpt3_ioctl_command32 __user *uarg; + struct mpt3_ioctl_command karg; + + if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32)) + return -EINVAL; + + uarg = (struct mpt3_ioctl_command32 __user *) arg; + + if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + memset(&karg, 0, sizeof(struct mpt3_ioctl_command)); + karg.hdr.ioc_number = karg32.hdr.ioc_number; + karg.hdr.port_number = karg32.hdr.port_number; + karg.hdr.max_data_size = karg32.hdr.max_data_size; + karg.timeout = karg32.timeout; + karg.max_reply_bytes = karg32.max_reply_bytes; + karg.data_in_size = karg32.data_in_size; + karg.data_out_size = karg32.data_out_size; + karg.max_sense_bytes = karg32.max_sense_bytes; + karg.data_sge_offset = karg32.data_sge_offset; + karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr); + karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr); + karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr); + karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr); + return _ctl_do_mpt_command(ioc, karg, &uarg->mf); +} +#endif + +/** + * _ctl_ioctl_main - main ioctl entry point + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + * compat - handles 32 bit applications in 64bit os + */ +static long +_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, + u8 compat) +{ + struct MPT3SAS_ADAPTER *ioc; + struct mpt3_ioctl_header ioctl_header; + enum block_state state; + long ret = -EINVAL; + + /* get IOCTL header */ + if (copy_from_user(&ioctl_header, (char __user *)arg, + sizeof(struct mpt3_ioctl_header))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + if (ioc->shost_recovery || ioc->pci_error_recovery || + ioc->is_driver_loading) + return -EAGAIN; + + state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING; + if (state == NON_BLOCKING) { + if (!mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + } else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + + switch (cmd) { + case MPT3IOCINFO: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo)) + ret = _ctl_getiocinfo(ioc, arg); + break; +#ifdef CONFIG_COMPAT + case MPT3COMMAND32: +#endif + case MPT3COMMAND: + { + struct mpt3_ioctl_command __user *uarg; + struct mpt3_ioctl_command karg; + +#ifdef CONFIG_COMPAT + if (compat) { + ret = _ctl_compat_mpt_command(ioc, cmd, arg); + break; + } +#endif + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + ret = -EFAULT; + break; + } + + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) { + uarg = arg; + ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf); + } + break; + } + case MPT3EVENTQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery)) + ret = _ctl_eventquery(ioc, arg); + break; + case MPT3EVENTENABLE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable)) + ret = _ctl_eventenable(ioc, arg); + break; + case MPT3EVENTREPORT: + ret = _ctl_eventreport(ioc, arg); + break; + case MPT3HARDRESET: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset)) + ret = _ctl_do_reset(ioc, arg); + break; + case MPT3BTDHMAPPING: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping)) + ret = _ctl_btdh_mapping(ioc, arg); + break; + case MPT3DIAGREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register)) + ret = _ctl_diag_register(ioc, arg); + break; + case MPT3DIAGUNREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister)) + ret = _ctl_diag_unregister(ioc, arg); + break; + case MPT3DIAGQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query)) + ret = _ctl_diag_query(ioc, arg); + break; + case MPT3DIAGRELEASE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release)) + ret = _ctl_diag_release(ioc, arg); + break; + case MPT3DIAGREADBUFFER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer)) + ret = _ctl_diag_read_buffer(ioc, arg); + break; + default: + dctlprintk(ioc, pr_info(MPT3SAS_FMT + "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd)); + break; + } + + mutex_unlock(&ioc->ctl_cmds.mutex); + return ret; +} + +/** + * _ctl_ioctl - main ioctl entry point (unlocked) + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + */ +static long +_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + long ret; + + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0); + return ret; +} + +#ifdef CONFIG_COMPAT +/** + * _ctl_ioctl_compat - main ioctl entry point (compat) + * @file - + * @cmd - + * @arg - + * + * This routine handles 32 bit applications in 64bit os. + */ +static long +_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) +{ + long ret; + + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1); + return ret; +} +#endif + +/* scsi host attributes */ +/** + * _ctl_version_fw_show - firmware version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF); +} +static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); + +/** + * _ctl_version_bios_show - bios version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (version & 0xFF000000) >> 24, + (version & 0x00FF0000) >> 16, + (version & 0x0000FF00) >> 8, + version & 0x000000FF); +} +static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); + +/** + * _ctl_version_mpi_show - MPI (message passing interface) version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%03x.%02x\n", + ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8); +} +static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); + +/** + * _ctl_version_product_show - product name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_product_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName); +} +static DEVICE_ATTR(version_product, S_IRUGO, _ctl_version_product_show, NULL); + +/** + * _ctl_version_nvdata_persistent_show - ndvata persistent version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_persistent_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%08xh\n", + le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); +} +static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, + _ctl_version_nvdata_persistent_show, NULL); + +/** + * _ctl_version_nvdata_default_show - nvdata default version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_default_show(struct device *cdev, struct device_attribute + *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%08xh\n", + le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); +} +static DEVICE_ATTR(version_nvdata_default, S_IRUGO, + _ctl_version_nvdata_default_show, NULL); + +/** + * _ctl_board_name_show - board name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_name_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName); +} +static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); + +/** + * _ctl_board_assembly_show - board assembly name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly); +} +static DEVICE_ATTR(board_assembly, S_IRUGO, _ctl_board_assembly_show, NULL); + +/** + * _ctl_board_tracer_show - board tracer number + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber); +} +static DEVICE_ATTR(board_tracer, S_IRUGO, _ctl_board_tracer_show, NULL); + +/** + * _ctl_io_delay_show - io missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); +} +static DEVICE_ATTR(io_delay, S_IRUGO, _ctl_io_delay_show, NULL); + +/** + * _ctl_device_delay_show - device missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); +} +static DEVICE_ATTR(device_delay, S_IRUGO, _ctl_device_delay_show, NULL); + +/** + * _ctl_fw_queue_depth_show - global credits + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is firmware queue depth limit + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit); +} +static DEVICE_ATTR(fw_queue_depth, S_IRUGO, _ctl_fw_queue_depth_show, NULL); + +/** + * _ctl_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the controller sas address + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, + char *buf) + +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)ioc->sas_hba.sas_address); +} +static DEVICE_ATTR(host_sas_address, S_IRUGO, + _ctl_host_sas_address_show, NULL); + +/** + * _ctl_logging_level_show - logging level + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level); +} +static ssize_t +_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + int val = 0; + + if (sscanf(buf, "%x", &val) != 1) + return -EINVAL; + + ioc->logging_level = val; + pr_info(MPT3SAS_FMT "logging_level=%08xh\n", ioc->name, + ioc->logging_level); + return strlen(buf); +} +static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, _ctl_logging_level_show, + _ctl_logging_level_store); + +/** + * _ctl_fwfault_debug_show - show/store fwfault_debug + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * mpt3sas_fwfault_debug is command line option + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_fwfault_debug_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug); +} +static ssize_t +_ctl_fwfault_debug_store(struct device *cdev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + int val = 0; + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + ioc->fwfault_debug = val; + pr_info(MPT3SAS_FMT "fwfault_debug=%d\n", ioc->name, + ioc->fwfault_debug); + return strlen(buf); +} +static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR, + _ctl_fwfault_debug_show, _ctl_fwfault_debug_store); + +/** + * _ctl_ioc_reset_count_show - ioc reset count + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is firmware queue depth limit + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count); +} +static DEVICE_ATTR(ioc_reset_count, S_IRUGO, _ctl_ioc_reset_count_show, NULL); + +/** + * _ctl_ioc_reply_queue_count_show - number of reply queues + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is number of reply queues + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_ioc_reply_queue_count_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + u8 reply_queue_count; + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable) + reply_queue_count = ioc->reply_queue_count; + else + reply_queue_count = 1; + + return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count); +} +static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show, + NULL); + +struct DIAG_BUFFER_START { + __le32 Size; + __le32 DiagVersion; + u8 BufferType; + u8 Reserved[3]; + __le32 Reserved1; + __le32 Reserved2; + __le32 Reserved3; +}; + +/** + * _ctl_host_trace_buffer_size_show - host buffer size (trace only) + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_host_trace_buffer_size_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + u32 size = 0; + struct DIAG_BUFFER_START *request_data; + + if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) { + pr_err(MPT3SAS_FMT + "%s: host_trace_buffer is not registered\n", + ioc->name, __func__); + return 0; + } + + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + pr_err(MPT3SAS_FMT + "%s: host_trace_buffer is not registered\n", + ioc->name, __func__); + return 0; + } + + request_data = (struct DIAG_BUFFER_START *) + ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]; + if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 || + le32_to_cpu(request_data->DiagVersion) == 0x01000000 || + le32_to_cpu(request_data->DiagVersion) == 0x01010000) && + le32_to_cpu(request_data->Reserved3) == 0x4742444c) + size = le32_to_cpu(request_data->Size); + + ioc->ring_buffer_sz = size; + return snprintf(buf, PAGE_SIZE, "%d\n", size); +} +static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO, + _ctl_host_trace_buffer_size_show, NULL); + +/** + * _ctl_host_trace_buffer_show - firmware ring buffer (trace only) + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + * + * You will only be able to read 4k bytes of ring buffer at a time. + * In order to read beyond 4k bytes, you will have to write out the + * offset to the same attribute, it will move the pointer. + */ +static ssize_t +_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + void *request_data; + u32 size; + + if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) { + pr_err(MPT3SAS_FMT + "%s: host_trace_buffer is not registered\n", + ioc->name, __func__); + return 0; + } + + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + pr_err(MPT3SAS_FMT + "%s: host_trace_buffer is not registered\n", + ioc->name, __func__); + return 0; + } + + if (ioc->ring_buffer_offset > ioc->ring_buffer_sz) + return 0; + + size = ioc->ring_buffer_sz - ioc->ring_buffer_offset; + size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size; + request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset; + memcpy(buf, request_data, size); + return size; +} + +static ssize_t +_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + int val = 0; + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + ioc->ring_buffer_offset = val; + return strlen(buf); +} +static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR, + _ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store); + + +/*****************************************/ + +/** + * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only) + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + * + * This is a mechnism to post/release host_trace_buffers + */ +static ssize_t +_ctl_host_trace_buffer_enable_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) || + ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)) + return snprintf(buf, PAGE_SIZE, "off\n"); + else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED)) + return snprintf(buf, PAGE_SIZE, "release\n"); + else + return snprintf(buf, PAGE_SIZE, "post\n"); +} + +static ssize_t +_ctl_host_trace_buffer_enable_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + char str[10] = ""; + struct mpt3_diag_register diag_register; + u8 issue_reset = 0; + + /* don't allow post/release occurr while recovery is active */ + if (ioc->shost_recovery || ioc->remove_host || + ioc->pci_error_recovery || ioc->is_driver_loading) + return -EBUSY; + + if (sscanf(buf, "%9s", str) != 1) + return -EINVAL; + + if (!strcmp(str, "post")) { + /* exit out if host buffers are already posted */ + if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) && + (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) && + ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) == 0)) + goto out; + memset(&diag_register, 0, sizeof(struct mpt3_diag_register)); + pr_info(MPT3SAS_FMT "posting host trace buffers\n", + ioc->name); + diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE; + diag_register.requested_buffer_size = (1024 * 1024); + diag_register.unique_id = 0x7075900; + ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0; + _ctl_diag_register_2(ioc, &diag_register); + } else if (!strcmp(str, "release")) { + /* exit out if host buffers are already released */ + if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) + goto out; + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) + goto out; + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED)) + goto out; + pr_info(MPT3SAS_FMT "releasing host trace buffer\n", + ioc->name); + mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, + &issue_reset); + } + + out: + return strlen(buf); +} +static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR, + _ctl_host_trace_buffer_enable_show, + _ctl_host_trace_buffer_enable_store); + +/*********** diagnostic trigger suppport *********************************/ + +/** + * _ctl_diag_trigger_master_show - show the diag_trigger_master attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_master_show(struct device *cdev, + struct device_attribute *attr, char *buf) + +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t rc; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + rc = sizeof(struct SL_WH_MASTER_TRIGGER_T); + memcpy(buf, &ioc->diag_trigger_master, rc); + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return rc; +} + +/** + * _ctl_diag_trigger_master_store - store the diag_trigger_master attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_master_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) + +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t rc; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count); + memset(&ioc->diag_trigger_master, 0, + sizeof(struct SL_WH_MASTER_TRIGGER_T)); + memcpy(&ioc->diag_trigger_master, buf, rc); + ioc->diag_trigger_master.MasterData |= + (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return rc; +} +static DEVICE_ATTR(diag_trigger_master, S_IRUGO | S_IWUSR, + _ctl_diag_trigger_master_show, _ctl_diag_trigger_master_store); + + +/** + * _ctl_diag_trigger_event_show - show the diag_trigger_event attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_event_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t rc; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T); + memcpy(buf, &ioc->diag_trigger_event, rc); + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return rc; +} + +/** + * _ctl_diag_trigger_event_store - store the diag_trigger_event attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_event_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) + +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t sz; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count); + memset(&ioc->diag_trigger_event, 0, + sizeof(struct SL_WH_EVENT_TRIGGERS_T)); + memcpy(&ioc->diag_trigger_event, buf, sz); + if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES) + ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES; + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return sz; +} +static DEVICE_ATTR(diag_trigger_event, S_IRUGO | S_IWUSR, + _ctl_diag_trigger_event_show, _ctl_diag_trigger_event_store); + + +/** + * _ctl_diag_trigger_scsi_show - show the diag_trigger_scsi attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_scsi_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t rc; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T); + memcpy(buf, &ioc->diag_trigger_scsi, rc); + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return rc; +} + +/** + * _ctl_diag_trigger_scsi_store - store the diag_trigger_scsi attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_scsi_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t sz; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + sz = min(sizeof(struct SL_WH_SCSI_TRIGGERS_T), count); + memset(&ioc->diag_trigger_scsi, 0, + sizeof(struct SL_WH_EVENT_TRIGGERS_T)); + memcpy(&ioc->diag_trigger_scsi, buf, sz); + if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES) + ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES; + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return sz; +} +static DEVICE_ATTR(diag_trigger_scsi, S_IRUGO | S_IWUSR, + _ctl_diag_trigger_scsi_show, _ctl_diag_trigger_scsi_store); + + +/** + * _ctl_diag_trigger_scsi_show - show the diag_trigger_mpi attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_mpi_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t rc; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + rc = sizeof(struct SL_WH_MPI_TRIGGERS_T); + memcpy(buf, &ioc->diag_trigger_mpi, rc); + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return rc; +} + +/** + * _ctl_diag_trigger_mpi_store - store the diag_trigger_mpi attribute + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_diag_trigger_mpi_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + unsigned long flags; + ssize_t sz; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count); + memset(&ioc->diag_trigger_mpi, 0, + sizeof(struct SL_WH_EVENT_TRIGGERS_T)); + memcpy(&ioc->diag_trigger_mpi, buf, sz); + if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES) + ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES; + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return sz; +} + +static DEVICE_ATTR(diag_trigger_mpi, S_IRUGO | S_IWUSR, + _ctl_diag_trigger_mpi_show, _ctl_diag_trigger_mpi_store); + +/*********** diagnostic trigger suppport *** END ****************************/ + + + +/*****************************************/ + +struct device_attribute *mpt3sas_host_attrs[] = { + &dev_attr_version_fw, + &dev_attr_version_bios, + &dev_attr_version_mpi, + &dev_attr_version_product, + &dev_attr_version_nvdata_persistent, + &dev_attr_version_nvdata_default, + &dev_attr_board_name, + &dev_attr_board_assembly, + &dev_attr_board_tracer, + &dev_attr_io_delay, + &dev_attr_device_delay, + &dev_attr_logging_level, + &dev_attr_fwfault_debug, + &dev_attr_fw_queue_depth, + &dev_attr_host_sas_address, + &dev_attr_ioc_reset_count, + &dev_attr_host_trace_buffer_size, + &dev_attr_host_trace_buffer, + &dev_attr_host_trace_buffer_enable, + &dev_attr_reply_queue_count, + &dev_attr_diag_trigger_master, + &dev_attr_diag_trigger_event, + &dev_attr_diag_trigger_scsi, + &dev_attr_diag_trigger_mpi, + NULL, +}; + +/* device attributes */ + +/** + * _ctl_device_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the sas address for the target + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)sas_device_priv_data->sas_target->sas_address); +} +static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); + +/** + * _ctl_device_handle_show - device handle + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the firmware assigned device handle + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_handle_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", + sas_device_priv_data->sas_target->handle); +} +static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); + +struct device_attribute *mpt3sas_dev_attrs[] = { + &dev_attr_sas_address, + &dev_attr_sas_device_handle, + NULL, +}; + +static const struct file_operations ctl_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = _ctl_ioctl, + .release = _ctl_release, + .poll = _ctl_poll, + .fasync = _ctl_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = _ctl_ioctl_compat, +#endif +}; + +static struct miscdevice ctl_dev = { + .minor = MPT3SAS_MINOR, + .name = MPT3SAS_DEV_NAME, + .fops = &ctl_fops, +}; + +/** + * mpt3sas_ctl_init - main entry point for ctl. + * + */ +void +mpt3sas_ctl_init(void) +{ + async_queue = NULL; + if (misc_register(&ctl_dev) < 0) + pr_err("%s can't register misc device [minor=%d]\n", + MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR); + + init_waitqueue_head(&ctl_poll_wait); +} + +/** + * mpt3sas_ctl_exit - exit point for ctl + * + */ +void +mpt3sas_ctl_exit(void) +{ + struct MPT3SAS_ADAPTER *ioc; + int i; + + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) { + + /* free memory associated to diag buffers */ + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!ioc->diag_buffer[i]) + continue; + if (!(ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT3_DIAG_BUFFER_IS_RELEASED)) + continue; + pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i], + ioc->diag_buffer[i], ioc->diag_buffer_dma[i]); + ioc->diag_buffer[i] = NULL; + ioc->diag_buffer_status[i] = 0; + } + + kfree(ioc->event_log); + } + misc_deregister(&ctl_dev); +} diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h new file mode 100644 index 0000000..bd89f4f --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -0,0 +1,418 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT3SAS_CTL_H_INCLUDED +#define MPT3SAS_CTL_H_INCLUDED + +#ifdef __KERNEL__ +#include <linux/miscdevice.h> +#endif + + +#ifndef MPT3SAS_MINOR +#define MPT3SAS_MINOR (MPT_MINOR + 2) +#endif +#define MPT3SAS_DEV_NAME "mpt3ctl" +#define MPT3_MAGIC_NUMBER 'L' +#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ + +/** + * IOCTL opcodes + */ +#define MPT3IOCINFO _IOWR(MPT3_MAGIC_NUMBER, 17, \ + struct mpt3_ioctl_iocinfo) +#define MPT3COMMAND _IOWR(MPT3_MAGIC_NUMBER, 20, \ + struct mpt3_ioctl_command) +#ifdef CONFIG_COMPAT +#define MPT3COMMAND32 _IOWR(MPT3_MAGIC_NUMBER, 20, \ + struct mpt3_ioctl_command32) +#endif +#define MPT3EVENTQUERY _IOWR(MPT3_MAGIC_NUMBER, 21, \ + struct mpt3_ioctl_eventquery) +#define MPT3EVENTENABLE _IOWR(MPT3_MAGIC_NUMBER, 22, \ + struct mpt3_ioctl_eventenable) +#define MPT3EVENTREPORT _IOWR(MPT3_MAGIC_NUMBER, 23, \ + struct mpt3_ioctl_eventreport) +#define MPT3HARDRESET _IOWR(MPT3_MAGIC_NUMBER, 24, \ + struct mpt3_ioctl_diag_reset) +#define MPT3BTDHMAPPING _IOWR(MPT3_MAGIC_NUMBER, 31, \ + struct mpt3_ioctl_btdh_mapping) + +/* diag buffer support */ +#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \ + struct mpt3_diag_register) +#define MPT3DIAGRELEASE _IOWR(MPT3_MAGIC_NUMBER, 27, \ + struct mpt3_diag_release) +#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \ + struct mpt3_diag_unregister) +#define MPT3DIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 29, \ + struct mpt3_diag_query) +#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \ + struct mpt3_diag_read_buffer) + +/** + * struct mpt3_ioctl_header - main header structure + * @ioc_number - IOC unit number + * @port_number - IOC port number + * @max_data_size - maximum number bytes to transfer on read + */ +struct mpt3_ioctl_header { + uint32_t ioc_number; + uint32_t port_number; + uint32_t max_data_size; +}; + +/** + * struct mpt3_ioctl_diag_reset - diagnostic reset + * @hdr - generic header + */ +struct mpt3_ioctl_diag_reset { + struct mpt3_ioctl_header hdr; +}; + + +/** + * struct mpt3_ioctl_pci_info - pci device info + * @device - pci device id + * @function - pci function id + * @bus - pci bus id + * @segment_id - pci segment id + */ +struct mpt3_ioctl_pci_info { + union { + struct { + uint32_t device:5; + uint32_t function:3; + uint32_t bus:24; + } bits; + uint32_t word; + } u; + uint32_t segment_id; +}; + + +#define MPT2_IOCTL_INTERFACE_SCSI (0x00) +#define MPT2_IOCTL_INTERFACE_FC (0x01) +#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) +#define MPT2_IOCTL_INTERFACE_SAS (0x03) +#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) +#define MPT3_IOCTL_INTERFACE_SAS3 (0x06) +#define MPT2_IOCTL_VERSION_LENGTH (32) + +/** + * struct mpt3_ioctl_iocinfo - generic controller info + * @hdr - generic header + * @adapter_type - type of adapter (spi, fc, sas) + * @port_number - port number + * @pci_id - PCI Id + * @hw_rev - hardware revision + * @sub_system_device - PCI subsystem Device ID + * @sub_system_vendor - PCI subsystem Vendor ID + * @rsvd0 - reserved + * @firmware_version - firmware version + * @bios_version - BIOS version + * @driver_version - driver version - 32 ASCII characters + * @rsvd1 - reserved + * @scsi_id - scsi id of adapter 0 + * @rsvd2 - reserved + * @pci_information - pci info (2nd revision) + */ +struct mpt3_ioctl_iocinfo { + struct mpt3_ioctl_header hdr; + uint32_t adapter_type; + uint32_t port_number; + uint32_t pci_id; + uint32_t hw_rev; + uint32_t subsystem_device; + uint32_t subsystem_vendor; + uint32_t rsvd0; + uint32_t firmware_version; + uint32_t bios_version; + uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; + uint8_t rsvd1; + uint8_t scsi_id; + uint16_t rsvd2; + struct mpt3_ioctl_pci_info pci_information; +}; + + +/* number of event log entries */ +#define MPT3SAS_CTL_EVENT_LOG_SIZE (50) + +/** + * struct mpt3_ioctl_eventquery - query event count and type + * @hdr - generic header + * @event_entries - number of events returned by get_event_report + * @rsvd - reserved + * @event_types - type of events currently being captured + */ +struct mpt3_ioctl_eventquery { + struct mpt3_ioctl_header hdr; + uint16_t event_entries; + uint16_t rsvd; + uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; +}; + +/** + * struct mpt3_ioctl_eventenable - enable/disable event capturing + * @hdr - generic header + * @event_types - toggle off/on type of events to be captured + */ +struct mpt3_ioctl_eventenable { + struct mpt3_ioctl_header hdr; + uint32_t event_types[4]; +}; + +#define MPT3_EVENT_DATA_SIZE (192) +/** + * struct MPT3_IOCTL_EVENTS - + * @event - the event that was reported + * @context - unique value for each event assigned by driver + * @data - event data returned in fw reply message + */ +struct MPT3_IOCTL_EVENTS { + uint32_t event; + uint32_t context; + uint8_t data[MPT3_EVENT_DATA_SIZE]; +}; + +/** + * struct mpt3_ioctl_eventreport - returing event log + * @hdr - generic header + * @event_data - (see struct MPT3_IOCTL_EVENTS) + */ +struct mpt3_ioctl_eventreport { + struct mpt3_ioctl_header hdr; + struct MPT3_IOCTL_EVENTS event_data[1]; +}; + +/** + * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl + * @hdr - generic header + * @timeout - command timeout in seconds. (if zero then use driver default + * value). + * @reply_frame_buf_ptr - reply location + * @data_in_buf_ptr - destination for read + * @data_out_buf_ptr - data source for write + * @sense_data_ptr - sense data location + * @max_reply_bytes - maximum number of reply bytes to be sent to app. + * @data_in_size - number bytes for data transfer in (read) + * @data_out_size - number bytes for data transfer out (write) + * @max_sense_bytes - maximum number of bytes for auto sense buffers + * @data_sge_offset - offset in words from the start of the request message to + * the first SGL + * @mf[1]; + */ +struct mpt3_ioctl_command { + struct mpt3_ioctl_header hdr; + uint32_t timeout; + void __user *reply_frame_buf_ptr; + void __user *data_in_buf_ptr; + void __user *data_out_buf_ptr; + void __user *sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; + +#ifdef CONFIG_COMPAT +struct mpt3_ioctl_command32 { + struct mpt3_ioctl_header hdr; + uint32_t timeout; + uint32_t reply_frame_buf_ptr; + uint32_t data_in_buf_ptr; + uint32_t data_out_buf_ptr; + uint32_t sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; +#endif + +/** + * struct mpt3_ioctl_btdh_mapping - mapping info + * @hdr - generic header + * @id - target device identification number + * @bus - SCSI bus number that the target device exists on + * @handle - device handle for the target device + * @rsvd - reserved + * + * To obtain a bus/id the application sets + * handle to valid handle, and bus/id to 0xFFFF. + * + * To obtain the device handle the application sets + * bus/id valid value, and the handle to 0xFFFF. + */ +struct mpt3_ioctl_btdh_mapping { + struct mpt3_ioctl_header hdr; + uint32_t id; + uint32_t bus; + uint16_t handle; + uint16_t rsvd; +}; + + + +/* application flags for mpt3_diag_register, mpt3_diag_query */ +#define MPT3_APP_FLAGS_APP_OWNED (0x0001) +#define MPT3_APP_FLAGS_BUFFER_VALID (0x0002) +#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) + +/* flags for mpt3_diag_read_buffer */ +#define MPT3_FLAGS_REREGISTER (0x0001) + +#define MPT3_PRODUCT_SPECIFIC_DWORDS 23 + +/** + * struct mpt3_diag_register - application register with driver + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @requested_buffer_size - buffers size in bytes + * @unique_id - tag specified by application that is used to signal ownership + * of the buffer. + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +struct mpt3_diag_register { + struct mpt3_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; + uint32_t requested_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_unregister - application unregister with driver + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be unregistered + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +struct mpt3_diag_unregister { + struct mpt3_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_query - query relevant info associated with diag buffers + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @total_buffer_size - diag buffer size in bytes + * @driver_added_buffer_size - size of extra space appended to end of buffer + * @unique_id - unique id associated with this buffer. + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +struct mpt3_diag_query { + struct mpt3_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; + uint32_t total_buffer_size; + uint32_t driver_added_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_release - request to send Diag Release Message to firmware + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be released + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +struct mpt3_diag_release { + struct mpt3_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_read_buffer - request for copy of the diag buffer + * @hdr - generic header + * @status - + * @reserved - + * @flags - misc flags + * @starting_offset - starting offset within drivers buffer where to start + * reading data at into the specified application buffer + * @bytes_to_read - number of bytes to copy from the drivers buffer into the + * application buffer starting at starting_offset. + * @unique_id - unique id associated with this buffer. + * @diagnostic_data - data payload + */ +struct mpt3_diag_read_buffer { + struct mpt3_ioctl_header hdr; + uint8_t status; + uint8_t reserved; + uint16_t flags; + uint32_t starting_offset; + uint32_t bytes_to_read; + uint32_t unique_id; + uint32_t diagnostic_data[1]; +}; + +#endif /* MPT3SAS_CTL_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h new file mode 100644 index 0000000..35405e7 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h @@ -0,0 +1,219 @@ +/* + * Logging Support for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT3SAS_DEBUG_H_INCLUDED +#define MPT3SAS_DEBUG_H_INCLUDED + +#define MPT_DEBUG 0x00000001 +#define MPT_DEBUG_MSG_FRAME 0x00000002 +#define MPT_DEBUG_SG 0x00000004 +#define MPT_DEBUG_EVENTS 0x00000008 +#define MPT_DEBUG_EVENT_WORK_TASK 0x00000010 +#define MPT_DEBUG_INIT 0x00000020 +#define MPT_DEBUG_EXIT 0x00000040 +#define MPT_DEBUG_FAIL 0x00000080 +#define MPT_DEBUG_TM 0x00000100 +#define MPT_DEBUG_REPLY 0x00000200 +#define MPT_DEBUG_HANDSHAKE 0x00000400 +#define MPT_DEBUG_CONFIG 0x00000800 +#define MPT_DEBUG_DL 0x00001000 +#define MPT_DEBUG_RESET 0x00002000 +#define MPT_DEBUG_SCSI 0x00004000 +#define MPT_DEBUG_IOCTL 0x00008000 +#define MPT_DEBUG_SAS 0x00020000 +#define MPT_DEBUG_TRANSPORT 0x00040000 +#define MPT_DEBUG_TASK_SET_FULL 0x00080000 + +#define MPT_DEBUG_TRIGGER_DIAG 0x00200000 + + +/* + * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig + */ + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \ +{ \ + if (IOC->logging_level & BITS) \ + CMD; \ +} +#else +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) +#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */ + + +/* + * debug macros + */ + +#define dprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG) + +#define dsgprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG) + +#define devtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS) + +#define dewtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK) + +#define dinitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT) + +#define dexitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT) + +#define dfailprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL) + +#define dtmprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM) + +#define dreplyprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY) + +#define dhsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE) + +#define dcprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG) + +#define ddlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL) + +#define drsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET) + +#define dsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI) + +#define dctlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL) + +#define dsasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS) + +#define dsastransport(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE) + +#define dmfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME) + +#define dtsfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL) + +#define dtransportprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT) + +#define dTriggerDiagPrintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRIGGER_DIAG) + + + +/* inline functions for dumping debug data*/ +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _debug_dump_mf - print message frame contents + * @mpi_request: pointer to message frame + * @sz: number of dwords + */ +static inline void +_debug_dump_mf(void *mpi_request, int sz) +{ + int i; + __le32 *mfp = (__le32 *)mpi_request; + + pr_info("mf:\n\t"); + for (i = 0; i < sz; i++) { + if (i && ((i % 8) == 0)) + pr_info("\n\t"); + pr_info("%08x ", le32_to_cpu(mfp[i])); + } + pr_info("\n"); +} +/** + * _debug_dump_reply - print message frame contents + * @mpi_request: pointer to message frame + * @sz: number of dwords + */ +static inline void +_debug_dump_reply(void *mpi_request, int sz) +{ + int i; + __le32 *mfp = (__le32 *)mpi_request; + + pr_info("reply:\n\t"); + for (i = 0; i < sz; i++) { + if (i && ((i % 8) == 0)) + pr_info("\n\t"); + pr_info("%08x ", le32_to_cpu(mfp[i])); + } + pr_info("\n"); +} +/** + * _debug_dump_config - print config page contents + * @mpi_request: pointer to message frame + * @sz: number of dwords + */ +static inline void +_debug_dump_config(void *mpi_request, int sz) +{ + int i; + __le32 *mfp = (__le32 *)mpi_request; + + pr_info("config:\n\t"); + for (i = 0; i < sz; i++) { + if (i && ((i % 8) == 0)) + pr_info("\n\t"); + pr_info("%08x ", le32_to_cpu(mfp[i])); + } + pr_info("\n"); +} +#else +#define _debug_dump_mf(mpi_request, sz) +#define _debug_dump_reply(mpi_request, sz) +#define _debug_dump_config(mpi_request, sz) +#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */ + +#endif /* MPT3SAS_DEBUG_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c new file mode 100644 index 0000000..05f8045 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -0,0 +1,8167 @@ +/* + * Scsi Host Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/aer.h> +#include <linux/raid_class.h> + +#include "mpt3sas_base.h" + +MODULE_AUTHOR(MPT3SAS_AUTHOR); +MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MPT3SAS_DRIVER_VERSION); + +#define RAID_CHANNEL 1 +/* forward proto's */ +static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_expander); +static void _firmware_event_work(struct work_struct *work); + +static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, + struct _sas_device *sas_device); +static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u8 retry_count, u8 is_pd); + +static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid); + +static void _scsih_scan_start(struct Scsi_Host *shost); +static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time); + +/* global parameters */ +LIST_HEAD(mpt3sas_ioc_list); + +/* local parameters */ +static u8 scsi_io_cb_idx = -1; +static u8 tm_cb_idx = -1; +static u8 ctl_cb_idx = -1; +static u8 base_cb_idx = -1; +static u8 port_enable_cb_idx = -1; +static u8 transport_cb_idx = -1; +static u8 scsih_cb_idx = -1; +static u8 config_cb_idx = -1; +static int mpt_ids; + +static u8 tm_tr_cb_idx = -1 ; +static u8 tm_tr_volume_cb_idx = -1 ; +static u8 tm_sas_control_cb_idx = -1; + +/* command line options */ +static u32 logging_level; +MODULE_PARM_DESC(logging_level, + " bits for enabling additional logging info (default=0)"); + + +static ushort max_sectors = 0xFFFF; +module_param(max_sectors, ushort, 0); +MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767 default=32767"); + + +static int missing_delay[2] = {-1, -1}; +module_param_array(missing_delay, int, NULL, 0); +MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay"); + +/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ +#define MPT3SAS_MAX_LUN (16895) +static int max_lun = MPT3SAS_MAX_LUN; +module_param(max_lun, int, 0); +MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); + + + + +/* diag_buffer_enable is bitwise + * bit 0 set = TRACE + * bit 1 set = SNAPSHOT + * bit 2 set = EXTENDED + * + * Either bit can be set, or both + */ +static int diag_buffer_enable = -1; +module_param(diag_buffer_enable, int, 0); +MODULE_PARM_DESC(diag_buffer_enable, + " post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); +static int disable_discovery = -1; +module_param(disable_discovery, int, 0); +MODULE_PARM_DESC(disable_discovery, " disable discovery "); + + +/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */ +static int prot_mask = -1; +module_param(prot_mask, int, 0); +MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 "); + + +/* raid transport support */ + +static struct raid_template *mpt3sas_raid_template; + + +/** + * struct sense_info - common structure for obtaining sense keys + * @skey: sense key + * @asc: additional sense code + * @ascq: additional sense code qualifier + */ +struct sense_info { + u8 skey; + u8 asc; + u8 ascq; +}; + +#define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB) +#define MPT3SAS_TURN_ON_FAULT_LED (0xFFFC) +#define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD) +#define MPT3SAS_ABRT_TASK_SET (0xFFFE) +#define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF) +/** + * struct fw_event_work - firmware event struct + * @list: link list framework + * @work: work object (ioc->fault_reset_work_q) + * @cancel_pending_work: flag set during reset handling + * @ioc: per adapter object + * @device_handle: device handle + * @VF_ID: virtual function id + * @VP_ID: virtual port id + * @ignore: flag meaning this event has been marked to ignore + * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h + * @event_data: reply event data payload follows + * + * This object stored on ioc->fw_event_list. + */ +struct fw_event_work { + struct list_head list; + struct work_struct work; + u8 cancel_pending_work; + struct delayed_work delayed_work; + + struct MPT3SAS_ADAPTER *ioc; + u16 device_handle; + u8 VF_ID; + u8 VP_ID; + u8 ignore; + u16 event; + void *event_data; +}; + +/* raid transport support */ +static struct raid_template *mpt3sas_raid_template; + +/** + * struct _scsi_io_transfer - scsi io transfer + * @handle: sas device handle (assigned by firmware) + * @is_raid: flag set for hidden raid components + * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, + * @data_length: data transfer length + * @data_dma: dma pointer to data + * @sense: sense data + * @lun: lun number + * @cdb_length: cdb length + * @cdb: cdb contents + * @timeout: timeout for this command + * @VF_ID: virtual function id + * @VP_ID: virtual port id + * @valid_reply: flag set for reply message + * @sense_length: sense length + * @ioc_status: ioc status + * @scsi_state: scsi state + * @scsi_status: scsi staus + * @log_info: log information + * @transfer_length: data length transfer when there is a reply message + * + * Used for sending internal scsi commands to devices within this module. + * Refer to _scsi_send_scsi_io(). + */ +struct _scsi_io_transfer { + u16 handle; + u8 is_raid; + enum dma_data_direction dir; + u32 data_length; + dma_addr_t data_dma; + u8 sense[SCSI_SENSE_BUFFERSIZE]; + u32 lun; + u8 cdb_length; + u8 cdb[32]; + u8 timeout; + u8 VF_ID; + u8 VP_ID; + u8 valid_reply; + /* the following bits are only valid when 'valid_reply = 1' */ + u32 sense_length; + u16 ioc_status; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + u32 transfer_length; +}; + +/* + * The pci device ids are defined in mpi/mpi2_cnfg.h. + */ +static DEFINE_PCI_DEVICE_TABLE(scsih_pci_table) = { + /* Fury ~ 3004 and 3008 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008, + PCI_ANY_ID, PCI_ANY_ID }, + /* Invader ~ 3108 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, scsih_pci_table); + +/** + * _scsih_set_debug_level - global setting of ioc->logging_level. + * + * Note: The logging levels are defined in mpt3sas_debug.h. + */ +static int +_scsih_set_debug_level(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT3SAS_ADAPTER *ioc; + + if (ret) + return ret; + + pr_info("setting logging_level(0x%08x)\n", logging_level); + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) + ioc->logging_level = logging_level; + return 0; +} +module_param_call(logging_level, _scsih_set_debug_level, param_get_int, + &logging_level, 0644); + +/** + * _scsih_srch_boot_sas_address - search based on sas_address + * @sas_address: sas address + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_sas_address(u64 sas_address, + Mpi2BootDeviceSasWwid_t *boot_device) +{ + return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_device_name - search based on device name + * @device_name: device name specified in INDENTIFY fram + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_device_name(u64 device_name, + Mpi2BootDeviceDeviceName_t *boot_device) +{ + return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, + Mpi2BootDeviceEnclosureSlot_t *boot_device) +{ + return (enclosure_logical_id == le64_to_cpu(boot_device-> + EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> + SlotNumber)) ? 1 : 0; +} + +/** + * _scsih_is_boot_device - search for matching boot device. + * @sas_address: sas address + * @device_name: device name specified in INDENTIFY fram + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @form: specifies boot device form + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static int +_scsih_is_boot_device(u64 sas_address, u64 device_name, + u64 enclosure_logical_id, u16 slot, u8 form, + Mpi2BiosPage2BootDevice_t *boot_device) +{ + int rc = 0; + + switch (form) { + case MPI2_BIOSPAGE2_FORM_SAS_WWID: + if (!sas_address) + break; + rc = _scsih_srch_boot_sas_address( + sas_address, &boot_device->SasWwid); + break; + case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: + if (!enclosure_logical_id) + break; + rc = _scsih_srch_boot_encl_slot( + enclosure_logical_id, + slot, &boot_device->EnclosureSlot); + break; + case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: + if (!device_name) + break; + rc = _scsih_srch_boot_device_name( + device_name, &boot_device->DeviceName); + break; + case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: + break; + } + + return rc; +} + +/** + * _scsih_get_sas_address - set the sas_address for given device handle + * @handle: device handle + * @sas_address: sas address + * + * Returns 0 success, non-zero when failure + */ +static int +_scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u64 *sas_address) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 ioc_status; + + *sas_address = 0; + + if (handle <= ioc->sas_hba.num_phys) { + *sas_address = ioc->sas_hba.sas_address; + return 0; + } + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return -ENXIO; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + *sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + return 0; + } + + /* we hit this becuase the given parent handle doesn't exist */ + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + return -ENXIO; + + /* else error case */ + pr_err(MPT3SAS_FMT + "handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n", + ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -EIO; +} + +/** + * _scsih_determine_boot_device - determine boot device. + * @ioc: per adapter object + * @device: either sas_device or raid_device object + * @is_raid: [flag] 1 = raid object, 0 = sas object + * + * Determines whether this device should be first reported device to + * to scsi-ml or sas transport, this purpose is for persistent boot device. + * There are primary, alternate, and current entries in bios page 2. The order + * priority is primary, alternate, then current. This routine saves + * the corresponding device object and is_raid flag in the ioc object. + * The saved data to be used later in _scsih_probe_boot_devices(). + */ +static void +_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc, + void *device, u8 is_raid) +{ + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u64 sas_address; + u64 device_name; + u64 enclosure_logical_id; + u16 slot; + + /* only process this function when driver loads */ + if (!ioc->is_driver_loading) + return; + + /* no Bios, return immediately */ + if (!ioc->bios_pg3.BiosVersion) + return; + + if (!is_raid) { + sas_device = device; + sas_address = sas_device->sas_address; + device_name = sas_device->device_name; + enclosure_logical_id = sas_device->enclosure_logical_id; + slot = sas_device->slot; + } else { + raid_device = device; + sas_address = raid_device->wwid; + device_name = 0; + enclosure_logical_id = 0; + slot = 0; + } + + if (!ioc->req_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedBootDevice)) { + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "%s: req_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_boot_device.device = device; + ioc->req_boot_device.is_raid = is_raid; + } + } + + if (!ioc->req_alt_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedAltBootDevice)) { + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "%s: req_alt_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_alt_boot_device.device = device; + ioc->req_alt_boot_device.is_raid = is_raid; + } + } + + if (!ioc->current_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.CurrentBootDevice)) { + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "%s: current_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->current_boot_device.device = device; + ioc->current_boot_device.is_raid = is_raid; + } + } +} + +/** + * mpt3sas_scsih_sas_device_find_by_sas_address - sas device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +struct _sas_device * +mpt3sas_scsih_sas_device_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_device *sas_device; + + list_for_each_entry(sas_device, &ioc->sas_device_list, list) + if (sas_device->sas_address == sas_address) + return sas_device; + + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) + if (sas_device->sas_address == sas_address) + return sas_device; + + return NULL; +} + +/** + * _scsih_sas_device_find_by_handle - sas device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +static struct _sas_device * +_scsih_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device; + + list_for_each_entry(sas_device, &ioc->sas_device_list, list) + if (sas_device->handle == handle) + return sas_device; + + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) + if (sas_device->handle == handle) + return sas_device; + + return NULL; +} + +/** + * _scsih_sas_device_remove - remove sas_device from list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Removing object and freeing associated memory from the ioc->sas_device_list. + */ +static void +_scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + if (!sas_device) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_del(&sas_device->list); + kfree(sas_device); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_device_remove_by_handle - removing device object by handle + * @ioc: per adapter object + * @handle: device handle + * + * Return nothing. + */ +static void +_scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device; + unsigned long flags; + + if (ioc->shost_recovery) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (sas_device) + list_del(&sas_device->list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + _scsih_remove_device(ioc, sas_device); +} + +/** + * mpt3sas_device_remove_by_sas_address - removing device object by sas address + * @ioc: per adapter object + * @sas_address: device sas_address + * + * Return nothing. + */ +void +mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_device *sas_device; + unsigned long flags; + + if (ioc->shost_recovery) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + if (sas_device) + list_del(&sas_device->list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + _scsih_remove_device(ioc, sas_device); +} + +/** + * _scsih_sas_device_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object to the ioc->sas_device_list. + */ +static void +_scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, __func__, sas_device->handle, + (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!mpt3sas_transport_port_add(ioc, sas_device->handle, + sas_device->sas_address_parent)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + /* + * When asyn scanning is enabled, its not possible to remove + * devices while scanning is turned on due to an oops in + * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start() + */ + if (!ioc->is_driver_loading) + mpt3sas_transport_port_remove(ioc, + sas_device->sas_address, + sas_device->sas_address_parent); + _scsih_sas_device_remove(ioc, sas_device); + } +} + +/** + * _scsih_sas_device_init_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object at driver load time to the ioc->sas_device_init_list. + */ +static void +_scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, + __func__, sas_device->handle, + (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_init_list); + _scsih_determine_boot_device(ioc, sas_device, 0); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_raid_device_find_by_id - raid device search + * @ioc: per adapter object + * @id: sas device target id + * @channel: sas device channel + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on target id, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->id == id && raid_device->channel == channel) { + r = raid_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_handle - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on handle, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->handle != handle) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_wwid - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on wwid, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid != wwid) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_add - add raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is added to the raid_device_list link list. + */ +static void +_scsih_raid_device_add(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, + raid_device->handle, (unsigned long long)raid_device->wwid)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_add_tail(&raid_device->list, &ioc->raid_device_list); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_raid_device_remove - delete raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + */ +static void +_scsih_raid_device_remove(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_del(&raid_device->list); + kfree(raid_device); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * mpt3sas_scsih_expander_find_by_handle - expander device search + * @ioc: per adapter object + * @handle: expander handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for expander device based on handle, then returns the + * sas_node object. + */ +struct _sas_node * +mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->handle != handle) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * mpt3sas_scsih_expander_find_by_sas_address - expander device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_node_lock. + * + * This searches for expander device based on sas_address, then returns the + * sas_node object. + */ +struct _sas_node * +mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address != sas_address) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_expander_node_add - insert expander device to the list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new object to the ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_add(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&sas_expander->list, &ioc->sas_expander_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_is_end_device - determines if device is an end device + * @device_info: bitfield providing information about the device. + * Context: none + * + * Returns 1 if end device. + */ +static int +_scsih_is_end_device(u32 device_info) +{ + if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && + ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) + return 1; + else + return 0; +} + +/** + * _scsih_scsi_lookup_get - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->scsi_lookup[smid - 1].scmd; +} + +/** + * _scsih_scsi_lookup_get_clear - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + * Then will derefrence the stored scmd pointer. + */ +static inline struct scsi_cmnd * +_scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + return scmd; +} + +/** + * _scsih_scsi_lookup_find_by_scmd - scmd lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a scmd pointer in the scsi_lookup array, + * returning the revelent smid. A returned value of zero means invalid. + */ +static u16 +_scsih_scsi_lookup_find_by_scmd(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd + *scmd) +{ + u16 smid; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + smid = 0; + for (i = 0; i < ioc->scsiio_depth; i++) { + if (ioc->scsi_lookup[i].scmd == scmd) { + smid = ioc->scsi_lookup[i].smid; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * _scsih_scsi_lookup_find_by_target - search for matching channel:id + * @ioc: per adapter object + * @id: target id + * @channel: channel + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a matching channel:id in the scsi_lookup array, + * returning 1 if found. + */ +static u8 +_scsih_scsi_lookup_find_by_target(struct MPT3SAS_ADAPTER *ioc, int id, + int channel) +{ + u8 found; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + found = 0; + for (i = 0 ; i < ioc->scsiio_depth; i++) { + if (ioc->scsi_lookup[i].scmd && + (ioc->scsi_lookup[i].scmd->device->id == id && + ioc->scsi_lookup[i].scmd->device->channel == channel)) { + found = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return found; +} + +/** + * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun + * @ioc: per adapter object + * @id: target id + * @lun: lun number + * @channel: channel + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a matching channel:id:lun in the scsi_lookup array, + * returning 1 if found. + */ +static u8 +_scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id, + unsigned int lun, int channel) +{ + u8 found; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + found = 0; + for (i = 0 ; i < ioc->scsiio_depth; i++) { + if (ioc->scsi_lookup[i].scmd && + (ioc->scsi_lookup[i].scmd->device->id == id && + ioc->scsi_lookup[i].scmd->device->channel == channel && + ioc->scsi_lookup[i].scmd->device->lun == lun)) { + found = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return found; +} + + +static void +_scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth) +{ + struct Scsi_Host *shost = sdev->host; + int max_depth; + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + + max_depth = shost->can_queue; + + /* limit max device queue for SATA to 32 */ + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + goto not_sata; + sas_target_priv_data = sas_device_priv_data->sas_target; + if (!sas_target_priv_data) + goto not_sata; + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) + goto not_sata; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + if (sas_device && sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + max_depth = MPT3SAS_SATA_QUEUE_DEPTH; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + not_sata: + + if (!sdev->tagged_supported) + max_depth = 1; + if (qdepth > max_depth) + qdepth = max_depth; + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); +} + +/** + * _scsih_change_queue_depth - setting device queue depth + * @sdev: scsi device struct + * @qdepth: requested queue depth + * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP + * (see include/scsi/scsi_host.h for definition) + * + * Returns queue depth. + */ +static int +_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) +{ + if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP) + _scsih_adjust_queue_depth(sdev, qdepth); + else if (reason == SCSI_QDEPTH_QFULL) + scsi_track_queue_full(sdev, qdepth); + else + return -EOPNOTSUPP; + + if (sdev->inquiry_len > 7) + sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " \ + "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", + sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags, sdev->scsi_level, + (sdev->inquiry[7] & 2) >> 1); + + return sdev->queue_depth; +} + +/** + * _scsih_change_queue_type - changing device queue tag type + * @sdev: scsi device struct + * @tag_type: requested tag type + * + * Returns queue tag type. + */ +static int +_scsih_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} + + +/** + * _scsih_target_alloc - target add routine + * @starget: scsi target struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +_scsih_target_alloc(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT3SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); + if (!sas_target_priv_data) + return -ENOMEM; + + starget->hostdata = sas_target_priv_data; + sas_target_priv_data->starget = starget; + sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; + + /* RAID volumes */ + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + sas_target_priv_data->handle = raid_device->handle; + sas_target_priv_data->sas_address = raid_device->wwid; + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; + raid_device->starget = starget; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return 0; + } + + /* sas/sata devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + + if (sas_device) { + sas_target_priv_data->handle = sas_device->handle; + sas_target_priv_data->sas_address = sas_device->sas_address; + sas_device->starget = starget; + sas_device->id = starget->id; + sas_device->channel = starget->channel; + if (test_bit(sas_device->handle, ioc->pd_handles)) + sas_target_priv_data->flags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + if (sas_device->fast_path) + sas_target_priv_data->flags |= MPT_TARGET_FASTPATH_IO; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + return 0; +} + +/** + * _scsih_target_destroy - target destroy routine + * @starget: scsi target struct + * + * Returns nothing. + */ +static void +_scsih_target_destroy(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT3SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = starget->hostdata; + if (!sas_target_priv_data) + return; + + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + raid_device->starget = NULL; + raid_device->sdev = NULL; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + goto out; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device && (sas_device->starget == starget) && + (sas_device->id == starget->id) && + (sas_device->channel == starget->channel)) + sas_device->starget = NULL; + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + out: + kfree(sas_target_priv_data); + starget->hostdata = NULL; +} + +/** + * _scsih_slave_alloc - device add routine + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +_scsih_slave_alloc(struct scsi_device *sdev) +{ + struct Scsi_Host *shost; + struct MPT3SAS_ADAPTER *ioc; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + unsigned long flags; + + sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); + if (!sas_device_priv_data) + return -ENOMEM; + + sas_device_priv_data->lun = sdev->lun; + sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns++; + sas_device_priv_data->sas_target = sas_target_priv_data; + sdev->hostdata = sas_device_priv_data; + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) + sdev->no_uld_attach = 1; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, + starget->id, starget->channel); + if (raid_device) + raid_device->sdev = sdev; /* raid is single lun */ + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } + + return 0; +} + +/** + * _scsih_slave_destroy - device destroy routine + * @sdev: scsi device struct + * + * Returns nothing. + */ +static void +_scsih_slave_destroy(struct scsi_device *sdev) +{ + struct MPT3SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct Scsi_Host *shost; + struct MPT3SAS_ADAPTER *ioc; + struct _sas_device *sas_device; + unsigned long flags; + + if (!sdev->hostdata) + return; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns--; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + + if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_target_priv_data->sas_address); + if (sas_device && !sas_target_priv_data->num_luns) + sas_device->starget = NULL; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + + kfree(sdev->hostdata); + sdev->hostdata = NULL; +} + +/** + * _scsih_display_sata_capabilities - sata capabilities + * @ioc: per adapter object + * @handle: device handle + * @sdev: scsi device struct + */ +static void +_scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc, + u16 handle, struct scsi_device *sdev) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + u16 flags; + u32 device_info; + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + flags = le16_to_cpu(sas_device_pg0.Flags); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + sdev_printk(KERN_INFO, sdev, + "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " + "sw_preserve(%s)\n", + (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : + "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); +} + +/* + * raid transport support - + * Enabled for SLES11 and newer, in older kernels the driver will panic when + * unloading the driver followed by a load - I beleive that the subroutine + * raid_class_release() is not cleaning up properly. + */ + +/** + * _scsih_is_raid - return boolean indicating device is raid volume + * @dev the device struct object + */ +static int +_scsih_is_raid(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return (sdev->channel == RAID_CHANNEL) ? 1 : 0; +} + +/** + * _scsih_get_resync - get raid volume resync percent complete + * @dev the device struct object + */ +static void +_scsih_get_resync(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host); + static struct _raid_device *raid_device; + unsigned long flags; + Mpi2RaidVolPage0_t vol_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 volume_status_flags; + u8 percent_complete; + u16 handle; + + percent_complete = 0; + handle = 0; + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, + sdev->channel); + if (raid_device) { + handle = raid_device->handle; + percent_complete = raid_device->percent_complete; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (!handle) + goto out; + + if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + sizeof(Mpi2RaidVolPage0_t))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + percent_complete = 0; + goto out; + } + + volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags); + if (!(volume_status_flags & + MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)) + percent_complete = 0; + + out: + raid_set_resync(mpt3sas_raid_template, dev, percent_complete); +} + +/** + * _scsih_get_state - get raid volume level + * @dev the device struct object + */ +static void +_scsih_get_state(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host); + static struct _raid_device *raid_device; + unsigned long flags; + Mpi2RaidVolPage0_t vol_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 volstate; + enum raid_state state = RAID_STATE_UNKNOWN; + u16 handle = 0; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, + sdev->channel); + if (raid_device) + handle = raid_device->handle; + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (!raid_device) + goto out; + + if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + sizeof(Mpi2RaidVolPage0_t))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags); + if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) { + state = RAID_STATE_RESYNCING; + goto out; + } + + switch (vol_pg0.VolumeState) { + case MPI2_RAID_VOL_STATE_OPTIMAL: + case MPI2_RAID_VOL_STATE_ONLINE: + state = RAID_STATE_ACTIVE; + break; + case MPI2_RAID_VOL_STATE_DEGRADED: + state = RAID_STATE_DEGRADED; + break; + case MPI2_RAID_VOL_STATE_FAILED: + case MPI2_RAID_VOL_STATE_MISSING: + state = RAID_STATE_OFFLINE; + break; + } + out: + raid_set_state(mpt3sas_raid_template, dev, state); +} + +/** + * _scsih_set_level - set raid level + * @sdev: scsi device struct + * @volume_type: volume type + */ +static void +_scsih_set_level(struct scsi_device *sdev, u8 volume_type) +{ + enum raid_level level = RAID_LEVEL_UNKNOWN; + + switch (volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + level = RAID_LEVEL_0; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + level = RAID_LEVEL_10; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + level = RAID_LEVEL_1E; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + level = RAID_LEVEL_1; + break; + } + + raid_set_level(mpt3sas_raid_template, &sdev->sdev_gendev, level); +} + + +/** + * _scsih_get_volume_capabilities - volume capabilities + * @ioc: per adapter object + * @sas_device: the raid_device object + * + * Returns 0 for success, else 1 + */ +static int +_scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + Mpi2RaidVolPage0_t *vol_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 sz; + u8 num_pds; + + if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle, + &num_pds)) || !num_pds) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; + } + + raid_device->num_pds = num_pds; + sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * + sizeof(Mpi2RaidVol0PhysDisk_t)); + vol_pg0 = kzalloc(sz, GFP_KERNEL); + if (!vol_pg0) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; + } + + if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + kfree(vol_pg0); + return 1; + } + + raid_device->volume_type = vol_pg0->VolumeType; + + /* figure out what the underlying devices are by + * obtaining the device_info bits for the 1st device + */ + if (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, + vol_pg0->PhysDisk[0].PhysDiskNum))) { + if (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + le16_to_cpu(pd_pg0.DevHandle)))) { + raid_device->device_info = + le32_to_cpu(sas_device_pg0.DeviceInfo); + } + } + + kfree(vol_pg0); + return 0; +} + + + +/** + * _scsih_enable_tlr - setting TLR flags + * @ioc: per adapter object + * @sdev: scsi device struct + * + * Enabling Transaction Layer Retries for tape devices when + * vpd page 0x90 is present + * + */ +static void +_scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev) +{ + + /* only for TAPE */ + if (sdev->type != TYPE_TAPE) + return; + + if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR)) + return; + + sas_enable_tlr(sdev); + sdev_printk(KERN_INFO, sdev, "TLR %s\n", + sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled"); + return; + +} + +/** + * _scsih_slave_configure - device configure routine. + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +_scsih_slave_configure(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + int qdepth; + u8 ssp_target = 0; + char *ds = ""; + char *r_level = ""; + u16 handle, volume_handle = 0; + u64 volume_wwid = 0; + + qdepth = 1; + sas_device_priv_data = sdev->hostdata; + sas_device_priv_data->configured_lun = 1; + sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; + sas_target_priv_data = sas_device_priv_data->sas_target; + handle = sas_target_priv_data->handle; + + /* raid volume handling */ + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; + } + + if (_scsih_get_volume_capabilities(ioc, raid_device)) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; + } + + + /* RAID Queue Depth Support + * IS volume = underlying qdepth of drive type, either + * MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH + * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH) + */ + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT3SAS_SAS_QUEUE_DEPTH; + ds = "SSP"; + } else { + qdepth = MPT3SAS_SATA_QUEUE_DEPTH; + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + else + ds = "STP"; + } + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + r_level = "RAID0"; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + qdepth = MPT3SAS_RAID_QUEUE_DEPTH; + if (ioc->manu_pg10.OEMIdentifier && + (le32_to_cpu(ioc->manu_pg10.GenericFlags0) & + MFG10_GF0_R10_DISPLAY) && + !(raid_device->num_pds % 2)) + r_level = "RAID10"; + else + r_level = "RAID1E"; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + qdepth = MPT3SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1"; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + qdepth = MPT3SAS_RAID_QUEUE_DEPTH; + r_level = "RAID10"; + break; + case MPI2_RAID_VOL_TYPE_UNKNOWN: + default: + qdepth = MPT3SAS_RAID_QUEUE_DEPTH; + r_level = "RAIDX"; + break; + } + + sdev_printk(KERN_INFO, sdev, + "%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", + r_level, raid_device->handle, + (unsigned long long)raid_device->wwid, + raid_device->num_pds, ds); + + + _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); + +/* raid transport support */ + _scsih_set_level(sdev, raid_device->volume_type); + return 0; + } + + /* non-raid handling */ + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { + if (mpt3sas_config_get_volume_handle(ioc, handle, + &volume_handle)) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } + if (volume_handle && mpt3sas_config_get_volume_wwid(ioc, + volume_handle, &volume_wwid)) { + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; + } + + sas_device->volume_handle = volume_handle; + sas_device->volume_wwid = volume_wwid; + if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT3SAS_SAS_QUEUE_DEPTH; + ssp_target = 1; + ds = "SSP"; + } else { + qdepth = MPT3SAS_SATA_QUEUE_DEPTH; + if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + ds = "STP"; + else if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + } + + sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " \ + "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n", + ds, handle, (unsigned long long)sas_device->sas_address, + sas_device->phy, (unsigned long long)sas_device->device_name); + sdev_printk(KERN_INFO, sdev, + "%s: enclosure_logical_id(0x%016llx), slot(%d)\n", + ds, (unsigned long long) + sas_device->enclosure_logical_id, sas_device->slot); + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!ssp_target) + _scsih_display_sata_capabilities(ioc, handle, sdev); + + + _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); + + if (ssp_target) { + sas_read_port_mode_page(sdev); + _scsih_enable_tlr(ioc, sdev); + } + + return 0; +} + +/** + * _scsih_bios_param - fetch head, sector, cylinder info for a disk + * @sdev: scsi device struct + * @bdev: pointer to block device context + * @capacity: device size (in 512 byte sectors) + * @params: three element array to place output: + * params[0] number of heads (max 255) + * params[1] number of sectors (max 63) + * params[2] number of cylinders + * + * Return nothing. + */ +static int +_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int params[]) +{ + int heads; + int sectors; + sector_t cylinders; + ulong dummy; + + heads = 64; + sectors = 32; + + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + + /* + * Handle extended translation size for logical drives + * > 1Gb + */ + if ((ulong)capacity >= 0x200000) { + heads = 255; + sectors = 63; + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + } + + /* return result */ + params[0] = heads; + params[1] = sectors; + params[2] = cylinders; + + return 0; +} + +/** + * _scsih_response_code - translation of device response code + * @ioc: per adapter object + * @response_code: response code returned by the device + * + * Return nothing. + */ +static void +_scsih_response_code(struct MPT3SAS_ADAPTER *ioc, u8 response_code) +{ + char *desc; + + switch (response_code) { + case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: + desc = "task management request completed"; + break; + case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: + desc = "invalid frame"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: + desc = "task management request not supported"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_FAILED: + desc = "task management request failed"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: + desc = "task management request succeeded"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: + desc = "invalid lun"; + break; + case 0xA: + desc = "overlapped tag attempted"; + break; + case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: + desc = "task queued, however not sent to target"; + break; + default: + desc = "unknown"; + break; + } + pr_warn(MPT3SAS_FMT "response_code(0x%01x): %s\n", + ioc->name, response_code, desc); +} + +/** + * _scsih_tm_done - tm completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using scsih_issue_tm. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_tm_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->tm_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->tm_cmds.smid != smid) + return 1; + mpt3sas_base_flush_reply_queues(ioc); + ioc->tm_cmds.status |= MPT3_CMD_COMPLETE; + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->tm_cmds.status |= MPT3_CMD_REPLY_VALID; + } + ioc->tm_cmds.status &= ~MPT3_CMD_PENDING; + complete(&ioc->tm_cmds.done); + return 1; +} + +/** + * mpt3sas_scsih_set_tm_flag - set per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 1; + skip = 1; + ioc->ignore_loginfos = 1; + } + } +} + +/** + * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 0; + skip = 1; + ioc->ignore_loginfos = 0; + } + } +} + +/** + * mpt3sas_scsih_issue_tm - main routine for sending tm requests + * @ioc: per adapter struct + * @device_handle: device handle + * @channel: the channel assigned by the OS + * @id: the id assigned by the OS + * @lun: lun number + * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) + * @smid_task: smid assigned to the task + * @timeout: timeout in seconds + * @serial_number: the serial_number from scmd + * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF + * Context: user + * + * A generic API for sending task management requests to firmware. + * + * The callback index is set inside `ioc->tm_cb_idx`. + * + * Return SUCCESS or FAILED. + */ +int +mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel, + uint id, uint lun, u8 type, u16 smid_task, ulong timeout, + unsigned long serial_number, enum mutex_type m_type) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + Mpi2SCSITaskManagementReply_t *mpi_reply; + u16 smid = 0; + u32 ioc_state; + unsigned long timeleft; + struct scsiio_tracker *scsi_lookup = NULL; + int rc; + + if (m_type == TM_MUTEX_ON) + mutex_lock(&ioc->tm_cmds.mutex); + if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) { + pr_info(MPT3SAS_FMT "%s: tm_cmd busy!!!\n", + __func__, ioc->name); + rc = FAILED; + goto err_out; + } + + if (ioc->shost_recovery || ioc->remove_host || + ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + rc = FAILED; + goto err_out; + } + + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "unexpected doorbell active!\n", ioc->name)); + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = (!rc) ? SUCCESS : FAILED; + goto err_out; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = (!rc) ? SUCCESS : FAILED; + goto err_out; + } + + smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = FAILED; + goto err_out; + } + + if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) + scsi_lookup = &ioc->scsi_lookup[smid_task - 1]; + + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d)\n", + ioc->name, handle, type, smid_task)); + ioc->tm_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->tm_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = type; + mpi_request->TaskMID = cpu_to_le16(smid_task); + int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); + mpt3sas_scsih_set_tm_flag(ioc, handle); + init_completion(&ioc->tm_cmds.done); + mpt3sas_base_put_smid_hi_priority(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); + if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + if (!(ioc->tm_cmds.status & MPT3_CMD_RESET)) { + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = (!rc) ? SUCCESS : FAILED; + ioc->tm_cmds.status = MPT3_CMD_NOT_USED; + mpt3sas_scsih_clear_tm_flag(ioc, handle); + goto err_out; + } + } + + if (ioc->tm_cmds.status & MPT3_CMD_REPLY_VALID) { + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT); + mpi_reply = ioc->tm_cmds.reply; + dtmprintk(ioc, pr_info(MPT3SAS_FMT "complete tm: " \ + "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + if (ioc->logging_level & MPT_DEBUG_TM) { + _scsih_response_code(ioc, mpi_reply->ResponseCode); + if (mpi_reply->IOCStatus) + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + } + } + + switch (type) { + case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK: + rc = SUCCESS; + if (scsi_lookup->scmd == NULL) + break; + rc = FAILED; + break; + + case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET: + if (_scsih_scsi_lookup_find_by_target(ioc, id, channel)) + rc = FAILED; + else + rc = SUCCESS; + break; + case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET: + case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET: + if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel)) + rc = FAILED; + else + rc = SUCCESS; + break; + case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK: + rc = SUCCESS; + break; + default: + rc = FAILED; + break; + } + + mpt3sas_scsih_clear_tm_flag(ioc, handle); + ioc->tm_cmds.status = MPT3_CMD_NOT_USED; + if (m_type == TM_MUTEX_ON) + mutex_unlock(&ioc->tm_cmds.mutex); + + return rc; + + err_out: + if (m_type == TM_MUTEX_ON) + mutex_unlock(&ioc->tm_cmds.mutex); + return rc; +} + +/** + * _scsih_tm_display_info - displays info about the device + * @ioc: per adapter struct + * @scmd: pointer to scsi command object + * + * Called by task management callback handlers. + */ +static void +_scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) +{ + struct scsi_target *starget = scmd->device->sdev_target; + struct MPT3SAS_TARGET *priv_target = starget->hostdata; + struct _sas_device *sas_device = NULL; + unsigned long flags; + char *device_str = NULL; + + if (!priv_target) + return; + device_str = "volume"; + + scsi_print_command(scmd); + if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { + starget_printk(KERN_INFO, starget, + "%s handle(0x%04x), %s wwid(0x%016llx)\n", + device_str, priv_target->handle, + device_str, (unsigned long long)priv_target->sas_address); + } else { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + priv_target->sas_address); + if (sas_device) { + if (priv_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + starget_printk(KERN_INFO, starget, + "volume handle(0x%04x), " + "volume wwid(0x%016llx)\n", + sas_device->volume_handle, + (unsigned long long)sas_device->volume_wwid); + } + starget_printk(KERN_INFO, starget, + "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n", + sas_device->handle, + (unsigned long long)sas_device->sas_address, + sas_device->phy); + starget_printk(KERN_INFO, starget, + "enclosure_logical_id(0x%016llx), slot(%d)\n", + (unsigned long long)sas_device->enclosure_logical_id, + sas_device->slot); + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } +} + +/** + * _scsih_abort - eh threads main abort routine + * @scmd: pointer to scsi command object + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +_scsih_abort(struct scsi_cmnd *scmd) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT3SAS_DEVICE *sas_device_priv_data; + u16 smid; + u16 handle; + int r; + + sdev_printk(KERN_INFO, scmd->device, + "attempting task abort! scmd(%p)\n", scmd); + _scsih_tm_display_info(ioc, scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + sdev_printk(KERN_INFO, scmd->device, + "device been deleted! scmd(%p)\n", scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* search for the command */ + smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); + if (!smid) { + scmd->result = DID_RESET << 16; + r = SUCCESS; + goto out; + } + + /* for hidden raid components and volumes this is not supported */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT || + sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mpt3sas_halt_firmware(ioc); + + handle = sas_device_priv_data->sas_target->handle; + r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, scmd->device->lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, + scmd->serial_number, TM_MUTEX_ON); + + out: + sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n", + ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + +/** + * _scsih_dev_reset - eh threads main device reset routine + * @scmd: pointer to scsi command object + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +_scsih_dev_reset(struct scsi_cmnd *scmd) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + u16 handle; + int r; + + sdev_printk(KERN_INFO, scmd->device, + "attempting device reset! scmd(%p)\n", scmd); + _scsih_tm_display_info(ioc, scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + sdev_printk(KERN_INFO, scmd->device, + "device been deleted! scmd(%p)\n", scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* for hidden raid components obtain the volume_handle */ + handle = 0; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, + sas_device_priv_data->sas_target->handle); + if (sas_device) + handle = sas_device->volume_handle; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } else + handle = sas_device_priv_data->sas_target->handle; + + if (!handle) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, scmd->device->lun, + MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, 0, + TM_MUTEX_ON); + + out: + sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n", + ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + +/** + * _scsih_target_reset - eh threads main target reset routine + * @scmd: pointer to scsi command object + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +_scsih_target_reset(struct scsi_cmnd *scmd) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + u16 handle; + int r; + struct scsi_target *starget = scmd->device->sdev_target; + + starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n", + scmd); + _scsih_tm_display_info(ioc, scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n", + scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* for hidden raid components obtain the volume_handle */ + handle = 0; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, + sas_device_priv_data->sas_target->handle); + if (sas_device) + handle = sas_device->volume_handle; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } else + handle = sas_device_priv_data->sas_target->handle; + + if (!handle) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, + 30, 0, TM_MUTEX_ON); + + out: + starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n", + ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + + +/** + * _scsih_host_reset - eh threads main host reset routine + * @scmd: pointer to scsi command object + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +_scsih_host_reset(struct scsi_cmnd *scmd) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + int r, retval; + + pr_info(MPT3SAS_FMT "attempting host reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + r = (retval < 0) ? FAILED : SUCCESS; + pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + + return r; +} + +/** + * _scsih_fw_event_add - insert and queue up fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This adds the firmware event object into link list, then queues it up to + * be processed from user context. + * + * Return nothing. + */ +static void +_scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) +{ + unsigned long flags; + + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + INIT_LIST_HEAD(&fw_event->list); + list_add_tail(&fw_event->list, &ioc->fw_event_list); + INIT_WORK(&fw_event->work, _firmware_event_work); + queue_work(ioc->firmware_event_thread, &fw_event->work); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_free - delete fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This removes firmware event object from link list, frees associated memory. + * + * Return nothing. + */ +static void +_scsih_fw_event_free(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work + *fw_event) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_del(&fw_event->list); + kfree(fw_event->event_data); + kfree(fw_event); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + + + /** + * mpt3sas_send_trigger_data_event - send event for processing trigger data + * @ioc: per adapter object + * @event_data: trigger event data + * + * Return nothing. + */ +void +mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data) +{ + struct fw_event_work *fw_event; + + if (ioc->is_driver_loading) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event_data = kzalloc(sizeof(*event_data), GFP_ATOMIC); + if (!fw_event->event_data) + return; + fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG; + fw_event->ioc = ioc; + memcpy(fw_event->event_data, event_data, sizeof(*event_data)); + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_error_recovery_delete_devices - remove devices not responding + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + + if (ioc->is_driver_loading) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * mpt3sas_port_enable_complete - port enable completed (fake event) + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_fw_event_cleanup_queue - cleanup event queue + * @ioc: per adapter object + * + * Walk the firmware event queue, either killing timers, or waiting + * for outstanding events to complete + * + * Return nothing. + */ +static void +_scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event, *next; + + if (list_empty(&ioc->fw_event_list) || + !ioc->firmware_event_thread || in_interrupt()) + return; + + list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) { + if (cancel_delayed_work(&fw_event->delayed_work)) { + _scsih_fw_event_free(ioc, fw_event); + continue; + } + fw_event->cancel_pending_work = 1; + } +} + +/** + * _scsih_ublock_io_all_device - unblock every device + * @ioc: per adapter object + * + * change the device state from block to running + */ +static void +_scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (!sas_device_priv_data->block) + continue; + + sas_device_priv_data->block = 0; + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + "device_running, handle(0x%04x)\n", + sas_device_priv_data->sas_target->handle)); + scsi_internal_device_unblock(sdev, SDEV_RUNNING); + } +} + + +/** + * _scsih_ublock_io_device - prepare device to be deleted + * @ioc: per adapter object + * @sas_addr: sas address + * + * unblock then put device in offline state + */ +static void +_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->sas_address + != sas_address) + continue; + if (sas_device_priv_data->block) { + sas_device_priv_data->block = 0; + scsi_internal_device_unblock(sdev, SDEV_RUNNING); + } + } +} + +/** + * _scsih_block_io_all_device - set the device state to SDEV_BLOCK + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->block) + continue; + sas_device_priv_data->block = 1; + scsi_internal_device_block(sdev); + sdev_printk(KERN_INFO, sdev, "device_blocked, handle(0x%04x)\n", + sas_device_priv_data->sas_target->handle); + } +} + +/** + * _scsih_block_io_device - set the device state to SDEV_BLOCK + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle != handle) + continue; + if (sas_device_priv_data->block) + continue; + sas_device_priv_data->block = 1; + scsi_internal_device_block(sdev); + sdev_printk(KERN_INFO, sdev, + "device_blocked, handle(0x%04x)\n", handle); + } +} + +/** + * _scsih_block_io_to_children_attached_to_ex + * @ioc: per adapter object + * @sas_expander: the sas_device object + * + * This routine set sdev state to SDEV_BLOCK for all devices + * attached to this expander. This function called when expander is + * pulled. + */ +static void +_scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt3sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + list_for_each_entry(mpt3sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt3sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + mpt3sas_port->remote_identify.sas_address); + if (sas_device) + set_bit(sas_device->handle, + ioc->blocking_handles); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + } + + list_for_each_entry(mpt3sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt3sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mpt3sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) { + expander_sibling = + mpt3sas_scsih_expander_find_by_sas_address( + ioc, mpt3sas_port->remote_identify.sas_address); + _scsih_block_io_to_children_attached_to_ex(ioc, + expander_sibling); + } + } +} + +/** + * _scsih_block_io_to_children_attached_directly + * @ioc: per adapter object + * @event_data: topology change event data + * + * This routine set sdev state to SDEV_BLOCK for all devices + * direct attached during device pull. + */ +static void +_scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) + _scsih_block_io_device(ioc, handle); + } +} + +/** + * _scsih_tm_tr_send - send task management request + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt time. + * + * This code is to initiate the device removal handshake protocol + * with controller firmware. This function will issue target reset + * using high priority request queue. It will send a sas iounit + * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. + * + * This is designed to send muliple task management request at the same + * time to the fifo. If the fifo is full, we will append the request, + * and process it in a future completion. + */ +static void +_scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + u16 smid; + struct _sas_device *sas_device; + struct MPT3SAS_TARGET *sas_target_priv_data = NULL; + u64 sas_address = 0; + unsigned long flags; + struct _tr_list *delayed_tr; + u32 ioc_state; + + if (ioc->remove_host) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host has been removed: handle(0x%04x)\n", + __func__, ioc->name, handle)); + return; + } else if (ioc->pci_error_recovery) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host in pci error recovery: handle(0x%04x)\n", + __func__, ioc->name, + handle)); + return; + } + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host is not operational: handle(0x%04x)\n", + __func__, ioc->name, + handle)); + return; + } + + /* if PD, then return */ + if (test_bit(handle, ioc->pd_handles)) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (sas_device && sas_device->starget && + sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + sas_address = sas_device->sas_address; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_target_priv_data) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, + (unsigned long long)sas_address)); + _scsih_ublock_io_device(ioc, sas_address); + sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; + } + + smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); + if (!smid) { + delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); + if (!delayed_tr) + return; + INIT_LIST_HEAD(&delayed_tr->list); + delayed_tr->handle = handle; + list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "DELAYED:tr:handle(0x%04x), (open)\n", + ioc->name, handle)); + return; + } + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n", + ioc->name, handle, smid, + ioc->tm_tr_cb_idx)); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; + mpt3sas_base_put_smid_hi_priority(ioc, smid); + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL); +} + +/** + * _scsih_tm_tr_complete - + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt time. + * + * This is the target reset completion routine. + * This code is part of the code to initiate the device removal + * handshake protocol with controller firmware. + * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + u16 handle; + Mpi2SCSITaskManagementRequest_t *mpi_request_tm; + Mpi2SCSITaskManagementReply_t *mpi_reply = + mpt3sas_base_get_reply_virt_addr(ioc, reply); + Mpi2SasIoUnitControlRequest_t *mpi_request; + u16 smid_sas_ctrl; + u32 ioc_state; + + if (ioc->remove_host) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host has been removed\n", __func__, ioc->name)); + return 1; + } else if (ioc->pci_error_recovery) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host in pci error recovery\n", __func__, + ioc->name)); + return 1; + } + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host is not operational\n", __func__, ioc->name)); + return 1; + } + if (unlikely(!mpi_reply)) { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 1; + } + mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid); + handle = le16_to_cpu(mpi_request_tm->DevHandle); + if (handle != le16_to_cpu(mpi_reply->DevHandle)) { + dewtprintk(ioc, pr_err(MPT3SAS_FMT + "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n", + ioc->name, handle, + le16_to_cpu(mpi_reply->DevHandle), smid)); + return 0; + } + + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " + "loginfo(0x%08x), completed(%d)\n", ioc->name, + handle, smid, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + + smid_sas_ctrl = mpt3sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx); + if (!smid_sas_ctrl) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return 1; + } + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n", + ioc->name, handle, smid_sas_ctrl, + ioc->tm_sas_control_cb_idx)); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid_sas_ctrl); + memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; + mpi_request->DevHandle = mpi_request_tm->DevHandle; + mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl); + + return _scsih_check_for_pending_tm(ioc, smid); +} + + +/** + * _scsih_sas_control_complete - completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt time. + * + * This is the sas iounit control completion routine. + * This code is part of the code to initiate the device removal + * handshake protocol with controller firmware. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply) +{ + Mpi2SasIoUnitControlReply_t *mpi_reply = + mpt3sas_base_get_reply_virt_addr(ioc, reply); + + if (likely(mpi_reply)) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "sc_complete:handle(0x%04x), (open) " + "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid, + le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo))); + } else { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + return 1; +} + +/** + * _scsih_tm_tr_volume_send - send target reset request for volumes + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt time. + * + * This is designed to send muliple task management request at the same + * time to the fifo. If the fifo is full, we will append the request, + * and process it in a future completion. + */ +static void +_scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + u16 smid; + struct _tr_list *delayed_tr; + + if (ioc->shost_recovery || ioc->remove_host || + ioc->pci_error_recovery) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host reset in progress!\n", + __func__, ioc->name)); + return; + } + + smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx); + if (!smid) { + delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); + if (!delayed_tr) + return; + INIT_LIST_HEAD(&delayed_tr->list); + delayed_tr->handle = handle; + list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "DELAYED:tr:handle(0x%04x), (open)\n", + ioc->name, handle)); + return; + } + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n", + ioc->name, handle, smid, + ioc->tm_tr_volume_cb_idx)); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; + mpt3sas_base_put_smid_hi_priority(ioc, smid); +} + +/** + * _scsih_tm_volume_tr_complete - target reset completion + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt time. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply) +{ + u16 handle; + Mpi2SCSITaskManagementRequest_t *mpi_request_tm; + Mpi2SCSITaskManagementReply_t *mpi_reply = + mpt3sas_base_get_reply_virt_addr(ioc, reply); + + if (ioc->shost_recovery || ioc->remove_host || + ioc->pci_error_recovery) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: host reset in progress!\n", + __func__, ioc->name)); + return 1; + } + if (unlikely(!mpi_reply)) { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 1; + } + + mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid); + handle = le16_to_cpu(mpi_request_tm->DevHandle); + if (handle != le16_to_cpu(mpi_reply->DevHandle)) { + dewtprintk(ioc, pr_err(MPT3SAS_FMT + "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n", + ioc->name, handle, + le16_to_cpu(mpi_reply->DevHandle), smid)); + return 0; + } + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " + "loginfo(0x%08x), completed(%d)\n", ioc->name, + handle, smid, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + + return _scsih_check_for_pending_tm(ioc, smid); +} + + +/** + * _scsih_check_for_pending_tm - check for pending task management + * @ioc: per adapter object + * @smid: system request message index + * + * This will check delayed target reset list, and feed the + * next reqeust. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + struct _tr_list *delayed_tr; + + if (!list_empty(&ioc->delayed_tr_volume_list)) { + delayed_tr = list_entry(ioc->delayed_tr_volume_list.next, + struct _tr_list, list); + mpt3sas_base_free_smid(ioc, smid); + _scsih_tm_tr_volume_send(ioc, delayed_tr->handle); + list_del(&delayed_tr->list); + kfree(delayed_tr); + return 0; + } + + if (!list_empty(&ioc->delayed_tr_list)) { + delayed_tr = list_entry(ioc->delayed_tr_list.next, + struct _tr_list, list); + mpt3sas_base_free_smid(ioc, smid); + _scsih_tm_tr_send(ioc, delayed_tr->handle); + list_del(&delayed_tr->list); + kfree(delayed_tr); + return 0; + } + + return 1; +} + +/** + * _scsih_check_topo_delete_events - sanity check on topo events + * @ioc: per adapter object + * @event_data: the event data payload + * + * This routine added to better handle cable breaker. + * + * This handles the case where driver receives multiple expander + * add and delete events in a single shot. When there is a delete event + * the routine will void any pending add events waiting in the event queue. + * + * Return nothing. + */ +static void +_scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + struct fw_event_work *fw_event; + Mpi2EventDataSasTopologyChangeList_t *local_event_data; + u16 expander_handle; + struct _sas_node *sas_expander; + unsigned long flags; + int i, reason_code; + u16 handle; + + for (i = 0 ; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING) + _scsih_tm_tr_send(ioc, handle); + } + + expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); + if (expander_handle < ioc->sas_hba.num_phys) { + _scsih_block_io_to_children_attached_directly(ioc, event_data); + return; + } + if (event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) { + /* put expander attached devices into blocking state */ + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc, + expander_handle); + _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + do { + handle = find_first_bit(ioc->blocking_handles, + ioc->facts.MaxDevHandle); + if (handle < ioc->facts.MaxDevHandle) + _scsih_block_io_device(ioc, handle); + } while (test_and_clear_bit(handle, ioc->blocking_handles)); + } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) + _scsih_block_io_to_children_attached_directly(ioc, event_data); + + if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + return; + + /* mark ignore flag for pending events */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_for_each_entry(fw_event, &ioc->fw_event_list, list) { + if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || + fw_event->ignore) + continue; + local_event_data = fw_event->event_data; + if (local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_ADDED || + local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { + if (le16_to_cpu(local_event_data->ExpanderDevHandle) == + expander_handle) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "setting ignoring flag\n", ioc->name)); + fw_event->ignore = 1; + } + } + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_set_volume_delete_flag - setting volume delete flag + * @ioc: per adapter object + * @handle: device handle + * + * This returns nothing. + */ +static void +_scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device; + struct MPT3SAS_TARGET *sas_target_priv_data; + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + if (raid_device && raid_device->starget && + raid_device->starget->hostdata) { + sas_target_priv_data = + raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "setting delete flag: handle(0x%04x), " + "wwid(0x%016llx)\n", ioc->name, handle, + (unsigned long long) raid_device->wwid)); + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_set_volume_handle_for_tr - set handle for target reset to volume + * @handle: input handle + * @a: handle for volume a + * @b: handle for volume b + * + * IR firmware only supports two raid volumes. The purpose of this + * routine is to set the volume handle in either a or b. When the given + * input handle is non-zero, or when a and b have not been set before. + */ +static void +_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b) +{ + if (!handle || handle == *a || handle == *b) + return; + if (!*a) + *a = handle; + else if (!*b) + *b = handle; +} + +/** + * _scsih_check_ir_config_unhide_events - check for UNHIDE events + * @ioc: per adapter object + * @event_data: the event data payload + * Context: interrupt time. + * + * This routine will send target reset to volume, followed by target + * resets to the PDs. This is called when a PD has been removed, or + * volume has been deleted or removed. When the target reset is sent + * to volume, the PD target resets need to be queued to start upon + * completion of the volume target reset. + * + * Return nothing. + */ +static void +_scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + int i; + u16 handle, volume_handle, a, b; + struct _tr_list *delayed_tr; + + a = 0; + b = 0; + + /* Volume Resets for Deleted or Removed */ + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + continue; + if (element->ReasonCode == + MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED || + element->ReasonCode == + MPI2_EVENT_IR_CHANGE_RC_REMOVED) { + volume_handle = le16_to_cpu(element->VolDevHandle); + _scsih_set_volume_delete_flag(ioc, volume_handle); + _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); + } + } + + /* Volume Resets for UNHIDE events */ + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + continue; + if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) { + volume_handle = le16_to_cpu(element->VolDevHandle); + _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); + } + } + + if (a) + _scsih_tm_tr_volume_send(ioc, a); + if (b) + _scsih_tm_tr_volume_send(ioc, b); + + /* PD target resets */ + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) + continue; + handle = le16_to_cpu(element->PhysDiskDevHandle); + volume_handle = le16_to_cpu(element->VolDevHandle); + clear_bit(handle, ioc->pd_handles); + if (!volume_handle) + _scsih_tm_tr_send(ioc, handle); + else if (volume_handle == a || volume_handle == b) { + delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); + BUG_ON(!delayed_tr); + INIT_LIST_HEAD(&delayed_tr->list); + delayed_tr->handle = handle; + list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name, + handle)); + } else + _scsih_tm_tr_send(ioc, handle); + } +} + + +/** + * _scsih_check_volume_delete_events - set delete flag for volumes + * @ioc: per adapter object + * @event_data: the event data payload + * Context: interrupt time. + * + * This will handle the case when the cable connected to entire volume is + * pulled. We will take care of setting the deleted flag so normal IO will + * not be sent. + * + * Return nothing. + */ +static void +_scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataIrVolume_t *event_data) +{ + u32 state; + + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) + return; + state = le32_to_cpu(event_data->NewValue); + if (state == MPI2_RAID_VOL_STATE_MISSING || state == + MPI2_RAID_VOL_STATE_FAILED) + _scsih_set_volume_delete_flag(ioc, + le16_to_cpu(event_data->VolDevHandle)); +} + +/** + * _scsih_flush_running_cmds - completing outstanding commands. + * @ioc: per adapter object + * + * The flushing out of all pending scmd commands following host reset, + * where all IO is dropped to the floor. + * + * Return nothing. + */ +static void +_scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc) +{ + struct scsi_cmnd *scmd; + u16 smid; + u16 count = 0; + + for (smid = 1; smid <= ioc->scsiio_depth; smid++) { + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); + if (!scmd) + continue; + count++; + mpt3sas_base_free_smid(ioc, smid); + scsi_dma_unmap(scmd); + if (ioc->pci_error_recovery) + scmd->result = DID_NO_CONNECT << 16; + else + scmd->result = DID_RESET << 16; + scmd->scsi_done(scmd); + } + dtmprintk(ioc, pr_info(MPT3SAS_FMT "completing %d cmds\n", + ioc->name, count)); +} + +/** + * _scsih_setup_eedp - setup MPI request for EEDP transfer + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @mpi_request: pointer to the SCSI_IO reqest message frame + * + * Supporting protection 1 and 3. + * + * Returns nothing + */ +static void +_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + Mpi2SCSIIORequest_t *mpi_request) +{ + u16 eedp_flags; + unsigned char prot_op = scsi_get_prot_op(scmd); + unsigned char prot_type = scsi_get_prot_type(scmd); + Mpi25SCSIIORequest_t *mpi_request_3v = + (Mpi25SCSIIORequest_t *)mpi_request; + + if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL) + return; + + if (prot_op == SCSI_PROT_READ_STRIP) + eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP; + else if (prot_op == SCSI_PROT_WRITE_INSERT) + eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP; + else + return; + + switch (prot_type) { + case SCSI_PROT_DIF_TYPE1: + case SCSI_PROT_DIF_TYPE2: + + /* + * enable ref/guard checking + * auto increment ref tag + */ + eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | + MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | + MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; + mpi_request->CDB.EEDP32.PrimaryReferenceTag = + cpu_to_be32(scsi_get_lba(scmd)); + break; + + case SCSI_PROT_DIF_TYPE3: + + /* + * enable guard checking + */ + eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; + + break; + } + + mpi_request_3v->EEDPBlockSize = + cpu_to_le16(scmd->device->sector_size); + mpi_request->EEDPFlags = cpu_to_le16(eedp_flags); +} + +/** + * _scsih_eedp_error_handling - return sense code for EEDP errors + * @scmd: pointer to scsi command object + * @ioc_status: ioc status + * + * Returns nothing + */ +static void +_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) +{ + u8 ascq; + + switch (ioc_status) { + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + ascq = 0x01; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + ascq = 0x02; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + ascq = 0x03; + break; + default: + ascq = 0x00; + break; + } + scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10, + ascq); + scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) | + SAM_STAT_CHECK_CONDITION; +} + + +/** + * _scsih_qcmd_lck - main scsi request entry point + * @scmd: pointer to scsi command object + * @done: function pointer to be invoked on completion + * + * The callback index is set inside `ioc->scsi_io_cb_idx`. + * + * Returns 0 on success. If there's a failure, return either: + * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or + * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full + */ +static int +_scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data; + Mpi2SCSIIORequest_t *mpi_request; + u32 mpi_control; + u16 smid; + u16 handle; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_SCSI) + scsi_print_command(scmd); +#endif + + scmd->scsi_done = done; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + if (ioc->pci_error_recovery || ioc->remove_host) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + sas_target_priv_data = sas_device_priv_data->sas_target; + + /* invalid device handle */ + handle = sas_target_priv_data->handle; + if (handle == MPT3SAS_INVALID_DEVICE_HANDLE) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + + /* host recovery or link resets sent via IOCTLs */ + if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) + return SCSI_MLQUEUE_HOST_BUSY; + + /* device has been deleted */ + else if (sas_target_priv_data->deleted) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + /* device busy with task managment */ + } else if (sas_target_priv_data->tm_busy || + sas_device_priv_data->block) + return SCSI_MLQUEUE_DEVICE_BUSY; + + if (scmd->sc_data_direction == DMA_FROM_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_READ; + else if (scmd->sc_data_direction == DMA_TO_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_WRITE; + else + mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; + + /* set tags */ + if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { + if (scmd->device->tagged_supported) { + if (scmd->device->ordered_tags) + mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; + else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + } else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + } else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && + scmd->cmd_len != 32) + mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; + + smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); + _scsih_setup_eedp(ioc, scmd, mpi_request); + + if (scmd->cmd_len == 32) + mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT; + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; + else + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); + mpi_request->Control = cpu_to_le32(mpi_control); + mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); + mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; + mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; + mpi_request->SenseBufferLowAddress = + mpt3sas_base_get_sense_buffer_dma(ioc, smid); + mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; + int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) + mpi_request->LUN); + memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); + + if (mpi_request->DataLength) { + if (ioc->build_sg_scmd(ioc, scmd, smid)) { + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + } else + ioc->build_zero_len_sge(ioc, &mpi_request->SGL); + + if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) { + if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) { + mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len | + MPI25_SCSIIO_IOFLAGS_FAST_PATH); + mpt3sas_base_put_smid_fast_path(ioc, smid, handle); + } else + mpt3sas_base_put_smid_scsi_io(ioc, smid, handle); + } else + mpt3sas_base_put_smid_default(ioc, smid); + return 0; + + out: + return SCSI_MLQUEUE_HOST_BUSY; +} +static DEF_SCSI_QCMD(_scsih_qcmd) + + +/** + * _scsih_normalize_sense - normalize descriptor and fixed format sense data + * @sense_buffer: sense data returned by target + * @data: normalized skey/asc/ascq + * + * Return nothing. + */ +static void +_scsih_normalize_sense(char *sense_buffer, struct sense_info *data) +{ + if ((sense_buffer[0] & 0x7F) >= 0x72) { + /* descriptor format */ + data->skey = sense_buffer[1] & 0x0F; + data->asc = sense_buffer[2]; + data->ascq = sense_buffer[3]; + } else { + /* fixed format */ + data->skey = sense_buffer[2] & 0x0F; + data->asc = sense_buffer[12]; + data->ascq = sense_buffer[13]; + } +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * scsi_status - SCSI Status code returned from target device + * scsi_state - state info associated with SCSI_IO determined by ioc + * ioc_status - ioc supplied status info + * + * Return nothing. + */ +static void +_scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + Mpi2SCSIIOReply_t *mpi_reply, u16 smid) +{ + u32 response_info; + u8 *response_bytes; + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + u8 scsi_state = mpi_reply->SCSIState; + u8 scsi_status = mpi_reply->SCSIStatus; + char *desc_ioc_state = NULL; + char *desc_scsi_status = NULL; + char *desc_scsi_state = ioc->tmp_string; + u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + struct _sas_device *sas_device = NULL; + unsigned long flags; + struct scsi_target *starget = scmd->device->sdev_target; + struct MPT3SAS_TARGET *priv_target = starget->hostdata; + char *device_str = NULL; + + if (!priv_target) + return; + device_str = "volume"; + + if (log_info == 0x31170000) + return; + + switch (ioc_status) { + case MPI2_IOCSTATUS_SUCCESS: + desc_ioc_state = "success"; + break; + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc_ioc_state = "invalid function"; + break; + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + desc_ioc_state = "scsi recovered error"; + break; + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + desc_ioc_state = "scsi invalid dev handle"; + break; + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + desc_ioc_state = "scsi device not there"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + desc_ioc_state = "scsi data overrun"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + desc_ioc_state = "scsi data underrun"; + break; + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + desc_ioc_state = "scsi io data error"; + break; + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + desc_ioc_state = "scsi protocol error"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + desc_ioc_state = "scsi task terminated"; + break; + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + desc_ioc_state = "scsi residual mismatch"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + desc_ioc_state = "scsi task mgmt failed"; + break; + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + desc_ioc_state = "scsi ioc terminated"; + break; + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + desc_ioc_state = "scsi ext terminated"; + break; + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc_ioc_state = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc_ioc_state = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc_ioc_state = "eedp app tag error"; + break; + default: + desc_ioc_state = "unknown"; + break; + } + + switch (scsi_status) { + case MPI2_SCSI_STATUS_GOOD: + desc_scsi_status = "good"; + break; + case MPI2_SCSI_STATUS_CHECK_CONDITION: + desc_scsi_status = "check condition"; + break; + case MPI2_SCSI_STATUS_CONDITION_MET: + desc_scsi_status = "condition met"; + break; + case MPI2_SCSI_STATUS_BUSY: + desc_scsi_status = "busy"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE: + desc_scsi_status = "intermediate"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: + desc_scsi_status = "intermediate condmet"; + break; + case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: + desc_scsi_status = "reservation conflict"; + break; + case MPI2_SCSI_STATUS_COMMAND_TERMINATED: + desc_scsi_status = "command terminated"; + break; + case MPI2_SCSI_STATUS_TASK_SET_FULL: + desc_scsi_status = "task set full"; + break; + case MPI2_SCSI_STATUS_ACA_ACTIVE: + desc_scsi_status = "aca active"; + break; + case MPI2_SCSI_STATUS_TASK_ABORTED: + desc_scsi_status = "task aborted"; + break; + default: + desc_scsi_status = "unknown"; + break; + } + + desc_scsi_state[0] = '\0'; + if (!scsi_state) + desc_scsi_state = " "; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + strcat(desc_scsi_state, "response info "); + if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + strcat(desc_scsi_state, "state terminated "); + if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) + strcat(desc_scsi_state, "no status "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) + strcat(desc_scsi_state, "autosense failed "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) + strcat(desc_scsi_state, "autosense valid "); + + scsi_print_command(scmd); + + if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { + pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name, + device_str, (unsigned long long)priv_target->sas_address); + } else { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + priv_target->sas_address); + if (sas_device) { + pr_warn(MPT3SAS_FMT + "\tsas_address(0x%016llx), phy(%d)\n", + ioc->name, (unsigned long long) + sas_device->sas_address, sas_device->phy); + pr_warn(MPT3SAS_FMT + "\tenclosure_logical_id(0x%016llx), slot(%d)\n", + ioc->name, (unsigned long long) + sas_device->enclosure_logical_id, sas_device->slot); + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + + pr_warn(MPT3SAS_FMT + "\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->DevHandle), + desc_ioc_state, ioc_status, smid); + pr_warn(MPT3SAS_FMT + "\trequest_len(%d), underflow(%d), resid(%d)\n", + ioc->name, scsi_bufflen(scmd), scmd->underflow, + scsi_get_resid(scmd)); + pr_warn(MPT3SAS_FMT + "\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->TaskTag), + le32_to_cpu(mpi_reply->TransferCount), scmd->result); + pr_warn(MPT3SAS_FMT + "\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n", + ioc->name, desc_scsi_status, + scsi_status, desc_scsi_state, scsi_state); + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + _scsih_normalize_sense(scmd->sense_buffer, &data); + pr_warn(MPT3SAS_FMT + "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n", + ioc->name, data.skey, + data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount)); + } + + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { + response_info = le32_to_cpu(mpi_reply->ResponseInfo); + response_bytes = (u8 *)&response_info; + _scsih_response_code(ioc, response_bytes[0]); + } +} +#endif + +/** + * _scsih_turn_on_fault_led - illuminate Fault LED + * @ioc: per adapter object + * @handle: device handle + * Context: process + * + * Return nothing. + */ +static void +_scsih_turn_on_fault_led(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SepReply_t mpi_reply; + Mpi2SepRequest_t mpi_request; + + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } +} + +/** + * _scsih_send_event_to_turn_on_fault_led - fire delayed event + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_send_event_to_turn_on_fault_led(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct fw_event_work *fw_event; + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT3SAS_TURN_ON_FAULT_LED; + fw_event->device_handle = handle; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_smart_predicted_fault - process smart errors + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct scsi_target *starget; + struct MPT3SAS_TARGET *sas_target_priv_data; + Mpi2EventNotificationReply_t *event_reply; + Mpi2EventDataSasDeviceStatusChange_t *event_data; + struct _sas_device *sas_device; + ssize_t sz; + unsigned long flags; + + /* only handle non-raid devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || + ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget_printk(KERN_WARNING, starget, "predicted fault\n"); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) + _scsih_send_event_to_turn_on_fault_led(ioc, handle); + + /* insert into event log */ + sz = offsetof(Mpi2EventNotificationReply_t, EventData) + + sizeof(Mpi2EventDataSasDeviceStatusChange_t); + event_reply = kzalloc(sz, GFP_KERNEL); + if (!event_reply) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + event_reply->Event = + cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + event_reply->MsgLength = sz/4; + event_reply->EventDataLength = + cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); + event_data = (Mpi2EventDataSasDeviceStatusChange_t *) + event_reply->EventData; + event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; + event_data->ASC = 0x5D; + event_data->DevHandle = cpu_to_le16(handle); + event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); + mpt3sas_ctl_add_to_event_log(ioc, event_reply); + kfree(event_reply); +} + +/** + * _scsih_io_done - scsi request callback + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when using _scsih_qcmd. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) +{ + Mpi2SCSIIORequest_t *mpi_request; + Mpi2SCSIIOReply_t *mpi_reply; + struct scsi_cmnd *scmd; + u16 ioc_status; + u32 xfer_cnt; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + struct MPT3SAS_DEVICE *sas_device_priv_data; + u32 response_code = 0; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); + if (scmd == NULL) + return 1; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + + if (mpi_reply == NULL) { + scmd->result = DID_OK << 16; + goto out; + } + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + sas_device_priv_data->sas_target->deleted) { + scmd->result = DID_NO_CONNECT << 16; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); + + /* turning off TLR */ + scsi_state = mpi_reply->SCSIState; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + response_code = + le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; + if (!sas_device_priv_data->tlr_snoop_check) { + sas_device_priv_data->tlr_snoop_check++; + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && + response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) + sas_device_priv_data->flags &= + ~MPT_DEVICE_TLR_ON; + } + + xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + else + log_info = 0; + ioc_status &= MPI2_IOCSTATUS_MASK; + scsi_status = mpi_reply->SCSIStatus; + + if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && + (scsi_status == MPI2_SCSI_STATUS_BUSY || + scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || + scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { + ioc_status = MPI2_IOCSTATUS_SUCCESS; + } + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + const void *sense_data = mpt3sas_base_get_sense_buffer(ioc, + smid); + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, + le32_to_cpu(mpi_reply->SenseCount)); + memcpy(scmd->sense_buffer, sense_data, sz); + _scsih_normalize_sense(scmd->sense_buffer, &data); + /* failure prediction threshold exceeded */ + if (data.asc == 0x5D) + _scsih_smart_predicted_fault(ioc, + le16_to_cpu(mpi_reply->DevHandle)); + mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq); + } + + switch (ioc_status) { + case MPI2_IOCSTATUS_BUSY: + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + scmd->result = SAM_STAT_BUSY; + break; + + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + scmd->result = DID_NO_CONNECT << 16; + break; + + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + if (sas_device_priv_data->block) { + scmd->result = DID_TRANSPORT_DISRUPTED << 16; + goto out; + } + if (log_info == 0x31110630) { + if (scmd->retries > 2) { + scmd->result = DID_NO_CONNECT << 16; + scsi_device_set_state(scmd->device, + SDEV_OFFLINE); + } else { + scmd->result = DID_SOFT_ERROR << 16; + scmd->device->expecting_cc_ua = 1; + } + break; + } + scmd->result = DID_SOFT_ERROR << 16; + break; + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) + scmd->result = DID_SOFT_ERROR << 16; + else + scmd->result = (DID_OK << 16) | scsi_status; + break; + + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + scmd->result = (DID_OK << 16) | scsi_status; + + if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) + break; + + if (xfer_cnt < scmd->underflow) { + if (scsi_status == SAM_STAT_BUSY) + scmd->result = SAM_STAT_BUSY; + else + scmd->result = DID_SOFT_ERROR << 16; + } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { + mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; + mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; + scmd->result = (DRIVER_SENSE << 24) | + SAM_STAT_CHECK_CONDITION; + scmd->sense_buffer[0] = 0x70; + scmd->sense_buffer[2] = ILLEGAL_REQUEST; + scmd->sense_buffer[12] = 0x20; + scmd->sense_buffer[13] = 0; + } + break; + + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + scsi_set_resid(scmd, 0); + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SUCCESS: + scmd->result = (DID_OK << 16) | scsi_status; + if (response_code == + MPI2_SCSITASKMGMT_RSP_INVALID_FRAME || + (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS))) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + _scsih_eedp_error_handling(scmd, ioc_status); + break; + + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_INVALID_FUNCTION: + case MPI2_IOCSTATUS_INVALID_SGL: + case MPI2_IOCSTATUS_INTERNAL_ERROR: + case MPI2_IOCSTATUS_INVALID_FIELD: + case MPI2_IOCSTATUS_INVALID_STATE: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + default: + scmd->result = DID_SOFT_ERROR << 16; + break; + + } + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) + _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); +#endif + + out: + + scsi_dma_unmap(scmd); + + scmd->scsi_done(scmd); + return 1; +} + +/** + * _scsih_sas_host_refresh - refreshing sas host object contents + * @ioc: per adapter object + * Context: user + * + * During port enable, fw will send topology events for every device. Its + * possible that the handles may change from the previous setting, so this + * code keeping handles updating if changed. + * + * Return nothing. + */ +static void +_scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) +{ + u16 sz; + u16 ioc_status; + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + u16 attached_handle; + u8 link_rate; + + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "updating handles for sas_host(0x%016llx)\n", + ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); + + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys + * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz)) != 0) + goto out; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4; + if (i == 0) + ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> + PhyData[0].ControllerDevHandle); + ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; + attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. + AttachedDevHandle); + if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) + link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; + mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address, + attached_handle, i, link_rate); + } + out: + kfree(sas_iounit_pg0); +} + +/** + * _scsih_sas_host_add - create sas host object + * @ioc: per adapter object + * + * Creating host side data object, stored in ioc->sas_hba + * + * Return nothing. + */ +static void +_scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) +{ + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u16 ioc_status; + u16 sz; + u8 device_missing_delay; + + mpt3sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); + if (!ioc->sas_hba.num_phys) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + /* sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + ioc->io_missing_delay = + sas_iounit_pg1->IODeviceMissingDelay; + device_missing_delay = + sas_iounit_pg1->ReportDeviceMissingDelay; + if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + ioc->device_missing_delay = (device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + ioc->device_missing_delay = device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + + ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; + ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!ioc->sas_hba.phy) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + i))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + if (i == 0) + ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> + PhyData[0].ControllerDevHandle); + ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; + ioc->sas_hba.phy[i].phy_id = i; + mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], + phy_pg0, ioc->sas_hba.parent_dev); + } + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + pr_info(MPT3SAS_FMT + "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n", + ioc->name, ioc->sas_hba.handle, + (unsigned long long) ioc->sas_hba.sas_address, + ioc->sas_hba.num_phys) ; + + if (ioc->sas_hba.enclosure_handle) { + if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + ioc->sas_hba.enclosure_handle))) + ioc->sas_hba.enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); +} + +/** + * _scsih_expander_add - creating expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Creating expander object, stored in ioc->sas_expander_list. + * + * Return 0 for success, else error. + */ +static int +_scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + Mpi2ConfigReply_t mpi_reply; + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ExpanderPage1_t expander_pg1; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u32 ioc_status; + u16 parent_handle; + u64 sas_address, sas_address_parent = 0; + int i; + unsigned long flags; + struct _sas_port *mpt3sas_port = NULL; + + int rc = 0; + + if (!handle) + return -1; + + if (ioc->shost_recovery || ioc->pci_error_recovery) + return -1; + + if ((mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* handle out of order topology events */ + parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); + if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent) + != 0) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if (sas_address_parent != ioc->sas_hba.sas_address) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, + sas_address_parent); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_expander) { + rc = _scsih_expander_add(ioc, parent_handle); + if (rc != 0) + return rc; + } + } + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_address = le64_to_cpu(expander_pg0.SASAddress); + sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (sas_expander) + return 0; + + sas_expander = kzalloc(sizeof(struct _sas_node), + GFP_KERNEL); + if (!sas_expander) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_expander->handle = handle; + sas_expander->num_phys = expander_pg0.NumPhys; + sas_expander->sas_address_parent = sas_address_parent; + sas_expander->sas_address = sas_address; + + pr_info(MPT3SAS_FMT "expander_add: handle(0x%04x)," \ + " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, + handle, parent_handle, (unsigned long long) + sas_expander->sas_address, sas_expander->num_phys); + + if (!sas_expander->num_phys) + goto out_fail; + sas_expander->phy = kcalloc(sas_expander->num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!sas_expander->phy) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + + INIT_LIST_HEAD(&sas_expander->sas_port_list); + mpt3sas_port = mpt3sas_transport_port_add(ioc, handle, + sas_address_parent); + if (!mpt3sas_port) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->parent_dev = &mpt3sas_port->rphy->dev; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->phy[i].handle = handle; + sas_expander->phy[i].phy_id = i; + + if ((mpt3sas_transport_add_expander_phy(ioc, + &sas_expander->phy[i], expander_pg1, + sas_expander->parent_dev))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + } + + if (sas_expander->enclosure_handle) { + if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_expander->enclosure_handle))) + sas_expander->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + + _scsih_expander_node_add(ioc, sas_expander); + return 0; + + out_fail: + + if (mpt3sas_port) + mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_address_parent); + kfree(sas_expander); + return rc; +} + +/** + * mpt3sas_expander_remove - removing expander object + * @ioc: per adapter object + * @sas_address: expander sas_address + * + * Return nothing. + */ +void +mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + if (ioc->shost_recovery) + return; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, + sas_address); + if (sas_expander) + list_del(&sas_expander->list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (sas_expander) + _scsih_expander_node_remove(ioc, sas_expander); +} + +/** + * _scsih_done - internal SCSI_IO callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated SCSI_IO. + * The callback index passed is `ioc->scsih_cb_idx` + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (ioc->scsih_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->scsih_cmds.smid != smid) + return 1; + ioc->scsih_cmds.status |= MPT3_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->scsih_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->scsih_cmds.status |= MPT3_CMD_REPLY_VALID; + } + ioc->scsih_cmds.status &= ~MPT3_CMD_PENDING; + complete(&ioc->scsih_cmds.done); + return 1; +} + + + + +#define MPT3_MAX_LUNS (255) + + +/** + * _scsih_check_access_status - check access flags + * @ioc: per adapter object + * @sas_address: sas address + * @handle: sas device handle + * @access_flags: errors returned during discovery of the device + * + * Return 0 for success, else failure + */ +static u8 +_scsih_check_access_status(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u16 handle, u8 access_status) +{ + u8 rc = 1; + char *desc = NULL; + + switch (access_status) { + case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS: + case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION: + rc = 0; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED: + desc = "sata capability failed"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT: + desc = "sata affiliation conflict"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE: + desc = "route not addressable"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE: + desc = "smp error not addressable"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED: + desc = "device blocked"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX: + desc = "sata initialization failed"; + break; + default: + desc = "unknown"; + break; + } + + if (!rc) + return 0; + + pr_err(MPT3SAS_FMT + "discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n", + ioc->name, desc, (unsigned long long)sas_address, handle); + return rc; +} + +/** + * _scsih_check_device - checking device responsiveness + * @ioc: per adapter object + * @parent_sas_address: sas address of parent expander or sas host + * @handle: attached device handle + * @phy_numberv: phy number + * @link_rate: new link rate + * + * Returns nothing. + */ +static void +_scsih_check_device(struct MPT3SAS_ADAPTER *ioc, + u64 parent_sas_address, u16 handle, u8 phy_number, u8 link_rate) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + unsigned long flags; + u64 sas_address; + struct scsi_target *starget; + struct MPT3SAS_TARGET *sas_target_priv_data; + u32 device_info; + + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + return; + + /* wide port handling ~ we need only handle device once for the phy that + * is matched in sas device page zero + */ + if (phy_number != sas_device_pg0.PhyNum) + return; + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + if (unlikely(sas_device->handle != handle)) { + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + starget_printk(KERN_INFO, starget, + "handle changed from(0x%04x) to (0x%04x)!!!\n", + sas_device->handle, handle); + sas_target_priv_data->handle = handle; + sas_device->handle = handle; + } + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + pr_err(MPT3SAS_FMT + "device is not present handle(0x%04x), flags!!!\n", + ioc->name, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + /* check if there were any issues with discovery */ + if (_scsih_check_access_status(ioc, sas_address, handle, + sas_device_pg0.AccessStatus)) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + _scsih_ublock_io_device(ioc, sas_address); + +} + +/** + * _scsih_add_device - creating sas device object + * @ioc: per adapter object + * @handle: sas device handle + * @phy_num: phy number end device attached to + * @is_pd: is this hidden raid component + * + * Creating end device object, stored in ioc->sas_device_list. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, + u8 is_pd) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + u64 sas_address; + u32 device_info; + unsigned long flags; + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + return -1; + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + pr_err(MPT3SAS_FMT "device is not present handle(0x04%x)!!!\n", + ioc->name, handle); + return -1; + } + + /* check if there were any issues with discovery */ + if (_scsih_check_access_status(ioc, sas_address, handle, + sas_device_pg0.AccessStatus)) + return -1; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device) + return -1; + + sas_device = kzalloc(sizeof(struct _sas_device), + GFP_KERNEL); + if (!sas_device) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 0; + } + + sas_device->handle = handle; + if (_scsih_get_sas_address(ioc, + le16_to_cpu(sas_device_pg0.ParentDevHandle), + &sas_device->sas_address_parent) != 0) + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_device->enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + sas_device->slot = + le16_to_cpu(sas_device_pg0.Slot); + sas_device->device_info = device_info; + sas_device->sas_address = sas_address; + sas_device->phy = sas_device_pg0.PhyNum; + sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) & + MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0; + + /* get enclosure_logical_id */ + if (sas_device->enclosure_handle && !(mpt3sas_config_get_enclosure_pg0( + ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_device->enclosure_handle))) + sas_device->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + + /* get device name */ + sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); + + if (ioc->wait_for_discovery_to_complete) + _scsih_sas_device_init_add(ioc, sas_device); + else + _scsih_sas_device_add(ioc, sas_device); + + return 0; +} + +/** + * _scsih_remove_device - removing sas device object + * @ioc: per adapter object + * @sas_device_delete: the sas_device object + * + * Return nothing. + */ +static void +_scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + struct MPT3SAS_TARGET *sas_target_priv_data; + + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, __func__, + sas_device->handle, (unsigned long long) + sas_device->sas_address)); + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + _scsih_ublock_io_device(ioc, sas_device->sas_address); + sas_target_priv_data->handle = + MPT3SAS_INVALID_DEVICE_HANDLE; + } + mpt3sas_transport_port_remove(ioc, + sas_device->sas_address, + sas_device->sas_address_parent); + + pr_info(MPT3SAS_FMT + "removing handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, sas_device->handle, + (unsigned long long) sas_device->sas_address); + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, __func__, + sas_device->handle, (unsigned long long) + sas_device->sas_address)); + + kfree(sas_device); +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_sas_topology_change_event_debug - debug for topology event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + */ +static void +_scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + char *status_str = NULL; + u8 link_rate, prev_link_rate; + + switch (event_data->ExpStatus) { + case MPI2_EVENT_SAS_TOPO_ES_ADDED: + status_str = "add"; + break; + case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: + status_str = "remove"; + break; + case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: + case 0: + status_str = "responding"; + break; + case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: + status_str = "remove delay"; + break; + default: + status_str = "unknown status"; + break; + } + pr_info(MPT3SAS_FMT "sas topology change: (%s)\n", + ioc->name, status_str); + pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \ + "start_phy(%02d), count(%d)\n", + le16_to_cpu(event_data->ExpanderDevHandle), + le16_to_cpu(event_data->EnclosureHandle), + event_data->StartPhyNum, event_data->NumEntries); + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + status_str = "target add"; + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + status_str = "target remove"; + break; + case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: + status_str = "delay target remove"; + break; + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + status_str = "link rate change"; + break; + case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: + status_str = "target responding"; + break; + default: + status_str = "unknown"; + break; + } + link_rate = event_data->PHY[i].LinkRate >> 4; + prev_link_rate = event_data->PHY[i].LinkRate & 0xF; + pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \ + " link rate: new(0x%02x), old(0x%02x)\n", phy_number, + handle, status_str, link_rate, prev_link_rate); + + } +} +#endif + +/** + * _scsih_sas_topology_change_event - handle topology changes + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + */ +static int +_scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + int i; + u16 parent_handle, handle; + u16 reason_code; + u8 phy_number, max_phys; + struct _sas_node *sas_expander; + u64 sas_address; + unsigned long flags; + u8 link_rate, prev_link_rate; + Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_topology_change_event_debug(ioc, event_data); +#endif + + if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) + return 0; + + if (!ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); + else + _scsih_sas_host_refresh(ioc); + + if (fw_event->ignore) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "ignoring expander event\n", ioc->name)); + return 0; + } + + parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); + + /* handle expander add */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) + if (_scsih_expander_add(ioc, parent_handle) != 0) + return 0; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc, + parent_handle); + if (sas_expander) { + sas_address = sas_expander->sas_address; + max_phys = sas_expander->num_phys; + } else if (parent_handle < ioc->sas_hba.num_phys) { + sas_address = ioc->sas_hba.sas_address; + max_phys = ioc->sas_hba.num_phys; + } else { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return 0; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* handle siblings events */ + for (i = 0; i < event_data->NumEntries; i++) { + if (fw_event->ignore) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "ignoring expander event\n", ioc->name)); + return 0; + } + if (ioc->remove_host || ioc->pci_error_recovery) + return 0; + phy_number = event_data->StartPhyNum + i; + if (phy_number >= max_phys) + continue; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if ((event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code != + MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)) + continue; + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + link_rate = event_data->PHY[i].LinkRate >> 4; + prev_link_rate = event_data->PHY[i].LinkRate & 0xF; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + + if (ioc->shost_recovery) + break; + + if (link_rate == prev_link_rate) + break; + + mpt3sas_transport_update_links(ioc, sas_address, + handle, phy_number, link_rate); + + if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) + break; + + _scsih_check_device(ioc, sas_address, handle, + phy_number, link_rate); + + + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + + if (ioc->shost_recovery) + break; + + mpt3sas_transport_update_links(ioc, sas_address, + handle, phy_number, link_rate); + + _scsih_add_device(ioc, handle, phy_number, 0); + + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + + _scsih_device_remove_by_handle(ioc, handle); + break; + } + } + + /* handle expander removal */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING && + sas_expander) + mpt3sas_expander_remove(ioc, sas_address); + + return 0; +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_sas_device_status_change_event_debug - debug for device event + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: + reason_str = "smart data"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + reason_str = "unsupported device discovered"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: + reason_str = "internal device reset"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: + reason_str = "internal task abort"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: + reason_str = "internal task abort set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: + reason_str = "internal clear task set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: + reason_str = "internal query task"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: + reason_str = "sata init failure"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: + reason_str = "internal device reset complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: + reason_str = "internal task abort complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: + reason_str = "internal async notification"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY: + reason_str = "expander reduced functionality"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY: + reason_str = "expander reduced functionality complete"; + break; + default: + reason_str = "unknown reason"; + break; + } + pr_info(MPT3SAS_FMT "device status change: (%s)\n" + "\thandle(0x%04x), sas address(0x%016llx), tag(%d)", + ioc->name, reason_str, le16_to_cpu(event_data->DevHandle), + (unsigned long long)le64_to_cpu(event_data->SASAddress), + le16_to_cpu(event_data->TaskTag)); + if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) + pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, + event_data->ASC, event_data->ASCQ); + pr_info("\n"); +} +#endif + +/** + * _scsih_sas_device_status_change_event - handle device status change + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + struct MPT3SAS_TARGET *target_priv_data; + struct _sas_device *sas_device; + u64 sas_address; + unsigned long flags; + Mpi2EventDataSasDeviceStatusChange_t *event_data = + fw_event->event_data; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_device_status_change_event_debug(ioc, + event_data); +#endif + + /* In MPI Revision K (0xC), the internal device reset complete was + * implemented, so avoid setting tm_busy flag for older firmware. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xC) + return; + + if (event_data->ReasonCode != + MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && + event_data->ReasonCode != + MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_address = le64_to_cpu(event_data->SASAddress); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + + if (!sas_device || !sas_device->starget) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + target_priv_data = sas_device->starget->hostdata; + if (!target_priv_data) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + if (event_data->ReasonCode == + MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET) + target_priv_data->tm_busy = 1; + else + target_priv_data->tm_busy = 0; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure + * event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_ENCL_RC_ADDED: + reason_str = "enclosure add"; + break; + case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: + reason_str = "enclosure remove"; + break; + default: + reason_str = "unknown reason"; + break; + } + + pr_info(MPT3SAS_FMT "enclosure status change: (%s)\n" + "\thandle(0x%04x), enclosure logical id(0x%016llx)" + " number slots(%d)\n", ioc->name, reason_str, + le16_to_cpu(event_data->EnclosureHandle), + (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), + le16_to_cpu(event_data->StartSlot)); +} +#endif + +/** + * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_enclosure_dev_status_change_event_debug(ioc, + fw_event->event_data); +#endif +} + +/** + * _scsih_sas_broadcast_primitive_event - handle broadcast events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + struct scsi_cmnd *scmd; + struct scsi_device *sdev; + u16 smid, handle; + u32 lun; + struct MPT3SAS_DEVICE *sas_device_priv_data; + u32 termination_count; + u32 query_count; + Mpi2SCSITaskManagementReply_t *mpi_reply; + Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; + u16 ioc_status; + unsigned long flags; + int r; + u8 max_retries = 0; + u8 task_abort_retries; + + mutex_lock(&ioc->tm_cmds.mutex); + pr_info(MPT3SAS_FMT + "%s: enter: phy number(%d), width(%d)\n", + ioc->name, __func__, event_data->PhyNum, + event_data->PortWidth); + + _scsih_block_io_all_device(ioc); + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + mpi_reply = ioc->tm_cmds.reply; + broadcast_aen_retry: + + /* sanity checks for retrying this loop */ + if (max_retries++ == 5) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: giving up\n", + ioc->name, __func__)); + goto out; + } else if (max_retries > 1) + dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: %d retry\n", + ioc->name, __func__, max_retries - 1)); + + termination_count = 0; + query_count = 0; + for (smid = 1; smid <= ioc->scsiio_depth; smid++) { + if (ioc->shost_recovery) + goto out; + scmd = _scsih_scsi_lookup_get(ioc, smid); + if (!scmd) + continue; + sdev = scmd->device; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) + continue; + /* skip hidden raid components */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + continue; + /* skip volumes */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_VOLUME) + continue; + + handle = sas_device_priv_data->sas_target->handle; + lun = sas_device_priv_data->lun; + query_count++; + + if (ioc->shost_recovery) + goto out; + + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + r = mpt3sas_scsih_issue_tm(ioc, handle, 0, 0, lun, + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, 0, + TM_MUTEX_OFF); + if (r == FAILED) { + sdev_printk(KERN_WARNING, sdev, + "mpt3sas_scsih_issue_tm: FAILED when sending " + "QUERY_TASK: scmd(%p)\n", scmd); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + goto broadcast_aen_retry; + } + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) + & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + sdev_printk(KERN_WARNING, sdev, + "query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n", + ioc_status, scmd); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + goto broadcast_aen_retry; + } + + /* see if IO is still owned by IOC and target */ + if (mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || + mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) { + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + continue; + } + task_abort_retries = 0; + tm_retry: + if (task_abort_retries++ == 60) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: ABORT_TASK: giving up\n", ioc->name, + __func__)); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + goto broadcast_aen_retry; + } + + if (ioc->shost_recovery) + goto out_no_lock; + + r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, + sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, + scmd->serial_number, TM_MUTEX_OFF); + if (r == FAILED) { + sdev_printk(KERN_WARNING, sdev, + "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : " + "scmd(%p)\n", scmd); + goto tm_retry; + } + + if (task_abort_retries > 1) + sdev_printk(KERN_WARNING, sdev, + "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):" + " scmd(%p)\n", + task_abort_retries - 1, scmd); + + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + } + + if (ioc->broadcast_aen_pending) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: loop back due to pending AEN\n", + ioc->name, __func__)); + ioc->broadcast_aen_pending = 0; + goto broadcast_aen_retry; + } + + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + out_no_lock: + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s - exit, query_count = %d termination_count = %d\n", + ioc->name, __func__, query_count, termination_count)); + + ioc->broadcast_aen_busy = 0; + if (!ioc->shost_recovery) + _scsih_ublock_io_all_device(ioc); + mutex_unlock(&ioc->tm_cmds.mutex); +} + +/** + * _scsih_sas_discovery_event - handle discovery events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { + pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + pr_info("discovery_status(0x%08x)", + le32_to_cpu(event_data->DiscoveryStatus)); + pr_info("\n"); + } +#endif + + if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && + !ioc->sas_hba.num_phys) { + if (disable_discovery > 0 && ioc->shost_recovery) { + /* Wait for the reset to complete */ + while (ioc->shost_recovery) + ssleep(1); + } + _scsih_sas_host_add(ioc); + } +} + +/** + * _scsih_ir_fastpath - turn on fastpath for IR physdisk + * @ioc: per adapter object + * @handle: device handle for physical disk + * @phys_disk_num: physical disk number + * + * Return 0 for success, else failure. + */ +static int +_scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num) +{ + Mpi2RaidActionRequest_t *mpi_request; + Mpi2RaidActionReply_t *mpi_reply; + u16 smid; + u8 issue_reset = 0; + int rc = 0; + u16 ioc_status; + u32 log_info; + + + mutex_lock(&ioc->scsih_cmds.mutex); + + if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->scsih_cmds.status = MPT3_CMD_PENDING; + + smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + rc = -EAGAIN; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->scsih_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t)); + + mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; + mpi_request->Action = MPI2_RAID_ACTION_PHYSDISK_HIDDEN; + mpi_request->PhysDiskNum = phys_disk_num; + + dewtprintk(ioc, pr_info(MPT3SAS_FMT "IR RAID_ACTION: turning fast "\ + "path on for handle(0x%04x), phys_disk_num (0x%02x)\n", ioc->name, + handle, phys_disk_num)); + + init_completion(&ioc->scsih_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); + + if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + if (!(ioc->scsih_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + rc = -EFAULT; + goto out; + } + + if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->scsih_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + else + log_info = 0; + ioc_status &= MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "IR RAID_ACTION: failed: ioc_status(0x%04x), " + "loginfo(0x%08x)!!!\n", ioc->name, ioc_status, + log_info)); + rc = -EFAULT; + } else + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "IR RAID_ACTION: completed successfully\n", + ioc->name)); + } + + out: + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + mutex_unlock(&ioc->scsih_cmds.mutex); + + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + return rc; +} + +/** + * _scsih_reprobe_lun - reprobing lun + * @sdev: scsi device struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + **/ +static void +_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) +{ + int rc; + sdev->no_uld_attach = no_uld_attach ? 1 : 0; + sdev_printk(KERN_INFO, sdev, "%s raid component\n", + sdev->no_uld_attach ? "hidding" : "exposing"); + rc = scsi_device_reprobe(sdev); +} + +/** + * _scsih_sas_volume_add - add new volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_add(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + unsigned long flags; + u64 wwid; + u16 handle = le16_to_cpu(element->VolDevHandle); + int rc; + + mpt3sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + pr_err(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (raid_device) + return; + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + pr_err(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + if (!ioc->wait_for_discovery_to_complete) { + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + _scsih_determine_boot_device(ioc, raid_device, 1); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } +} + +/** + * _scsih_sas_volume_delete - delete volume + * @ioc: per adapter object + * @handle: volume device handle + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device; + unsigned long flags; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget = NULL; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + if (raid_device) { + if (raid_device->starget) { + starget = raid_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->deleted = 1; + } + pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n", + ioc->name, raid_device->handle, + (unsigned long long) raid_device->wwid); + list_del(&raid_device->list); + kfree(raid_device); + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (starget) + scsi_remove_target(&starget->dev); +} + +/** + * _scsih_sas_pd_expose - expose pd component to /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + struct scsi_target *starget = NULL; + struct MPT3SAS_TARGET *sas_target_priv_data; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (sas_device) { + sas_device->volume_handle = 0; + sas_device->volume_wwid = 0; + clear_bit(handle, ioc->pd_handles); + if (sas_device->starget && sas_device->starget->hostdata) { + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->flags &= + ~MPT_TARGET_FLAGS_RAID_COMPONENT; + } + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* exposing raid component */ + if (starget) + starget_for_each_device(starget, NULL, _scsih_reprobe_lun); +} + +/** + * _scsih_sas_pd_hide - hide pd component from /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + struct scsi_target *starget = NULL; + struct MPT3SAS_TARGET *sas_target_priv_data; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + u16 volume_handle = 0; + u64 volume_wwid = 0; + + mpt3sas_config_get_volume_handle(ioc, handle, &volume_handle); + if (volume_handle) + mpt3sas_config_get_volume_wwid(ioc, volume_handle, + &volume_wwid); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (sas_device) { + set_bit(handle, ioc->pd_handles); + if (sas_device->starget && sas_device->starget->hostdata) { + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->flags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + sas_device->volume_handle = volume_handle; + sas_device->volume_wwid = volume_wwid; + } + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* hiding raid component */ + _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum); + if (starget) + starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun); +} + +/** + * _scsih_sas_pd_delete - delete pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_delete(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + _scsih_device_remove_by_handle(ioc, handle); +} + +/** + * _scsih_sas_pd_add - remove pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + u64 sas_address; + u16 parent_handle; + + set_bit(handle, ioc->pd_handles); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) { + _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum); + return; + } + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) + mpt3sas_transport_update_links(ioc, sas_address, handle, + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + + _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum); + _scsih_add_device(ioc, handle, 0, 1); +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + u8 element_type; + int i; + char *reason_str = NULL, *element_str = NULL; + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + + pr_info(MPT3SAS_FMT "raid config change: (%s), elements(%d)\n", + ioc->name, (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? + "foreign" : "native", event_data->NumElements); + for (i = 0; i < event_data->NumElements; i++, element++) { + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + reason_str = "add"; + break; + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + reason_str = "remove"; + break; + case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: + reason_str = "no change"; + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + reason_str = "hide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + reason_str = "unhide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + reason_str = "volume_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + reason_str = "volume_deleted"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + reason_str = "pd_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + reason_str = "pd_deleted"; + break; + default: + reason_str = "unknown reason"; + break; + } + element_type = le16_to_cpu(element->ElementFlags) & + MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; + switch (element_type) { + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: + element_str = "volume"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: + element_str = "phys disk"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: + element_str = "hot spare"; + break; + default: + element_str = "unknown element"; + break; + } + pr_info("\t(%s:%s), vol handle(0x%04x), " \ + "pd handle(0x%04x), pd num(0x%02x)\n", element_str, + reason_str, le16_to_cpu(element->VolDevHandle), + le16_to_cpu(element->PhysDiskDevHandle), + element->PhysDiskNum); + } +} +#endif + +/** + * _scsih_sas_ir_config_change_event - handle ir configuration change events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + Mpi2EventIrConfigElement_t *element; + int i; + u8 foreign_config; + Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_config_change_event_debug(ioc, event_data); + +#endif + + foreign_config = (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + if (ioc->shost_recovery) { + + for (i = 0; i < event_data->NumElements; i++, element++) { + if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE) + _scsih_ir_fastpath(ioc, + le16_to_cpu(element->PhysDiskDevHandle), + element->PhysDiskNum); + } + return; + } + for (i = 0; i < event_data->NumElements; i++, element++) { + + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + if (!foreign_config) + _scsih_sas_volume_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + if (!foreign_config) + _scsih_sas_volume_delete(ioc, + le16_to_cpu(element->VolDevHandle)); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + _scsih_sas_pd_hide(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + _scsih_sas_pd_expose(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + _scsih_sas_pd_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + _scsih_sas_pd_delete(ioc, element); + break; + } + } +} + +/** + * _scsih_sas_ir_volume_event - IR volume event + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + u64 wwid; + unsigned long flags; + struct _raid_device *raid_device; + u16 handle; + u32 state; + int rc; + Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; + + if (ioc->shost_recovery) + return; + + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->VolDevHandle); + state = le32_to_cpu(event_data->NewValue); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", + ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + switch (state) { + case MPI2_RAID_VOL_STATE_MISSING: + case MPI2_RAID_VOL_STATE_FAILED: + _scsih_sas_volume_delete(ioc, handle); + break; + + case MPI2_RAID_VOL_STATE_ONLINE: + case MPI2_RAID_VOL_STATE_DEGRADED: + case MPI2_RAID_VOL_STATE_OPTIMAL: + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (raid_device) + break; + + mpt3sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + pr_err(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + pr_err(MPT3SAS_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_INITIALIZING: + default: + break; + } +} + +/** + * _scsih_sas_ir_physical_disk_event - PD event + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + u16 handle, parent_handle; + u32 state; + struct _sas_device *sas_device; + unsigned long flags; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data; + u64 sas_address; + + if (ioc->shost_recovery) + return; + + if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->PhysDiskDevHandle); + state = le32_to_cpu(event_data->NewValue); + + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", + ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + switch (state) { + case MPI2_RAID_PD_STATE_ONLINE: + case MPI2_RAID_PD_STATE_DEGRADED: + case MPI2_RAID_PD_STATE_REBUILDING: + case MPI2_RAID_PD_STATE_OPTIMAL: + case MPI2_RAID_PD_STATE_HOT_SPARE: + + set_bit(handle, ioc->pd_handles); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device) + return; + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) + mpt3sas_transport_update_links(ioc, sas_address, handle, + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + + _scsih_add_device(ioc, handle, 0, 1); + + break; + + case MPI2_RAID_PD_STATE_OFFLINE: + case MPI2_RAID_PD_STATE_NOT_CONFIGURED: + case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: + default: + break; + } +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _scsih_sas_ir_operation_status_event_debug - debug for IR op event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventDataIrOperationStatus_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->RAIDOperation) { + case MPI2_EVENT_IR_RAIDOP_RESYNC: + reason_str = "resync"; + break; + case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: + reason_str = "online capacity expansion"; + break; + case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: + reason_str = "consistency check"; + break; + case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT: + reason_str = "background init"; + break; + case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT: + reason_str = "make data consistent"; + break; + } + + if (!reason_str) + return; + + pr_info(MPT3SAS_FMT "raid operational status: (%s)" \ + "\thandle(0x%04x), percent complete(%d)\n", + ioc->name, reason_str, + le16_to_cpu(event_data->VolDevHandle), + event_data->PercentComplete); +} +#endif + +/** + * _scsih_sas_ir_operation_status_event - handle RAID operation events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) +{ + Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data; + static struct _raid_device *raid_device; + unsigned long flags; + u16 handle; + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_operation_status_event_debug(ioc, + event_data); +#endif + + /* code added for raid transport support */ + if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) { + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + handle = le16_to_cpu(event_data->VolDevHandle); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + if (raid_device) + raid_device->percent_complete = + event_data->PercentComplete; + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } +} + +/** + * _scsih_prep_device_scan - initialize parameters prior to device scan + * @ioc: per adapter object + * + * Set the deleted flag prior to device scan. If the device is found during + * the scan, then we clear the deleted flag. + */ +static void +_scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (sas_device_priv_data && sas_device_priv_data->sas_target) + sas_device_priv_data->sas_target->deleted = 1; + } +} + +/** + * _scsih_mark_responding_sas_device - mark a sas_devices as responding + * @ioc: per adapter object + * @sas_address: sas address + * @slot: enclosure slot id + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsih_remove_unresponsive_sas_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u16 slot, u16 handle) +{ + struct MPT3SAS_TARGET *sas_target_priv_data = NULL; + struct scsi_target *starget; + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address == sas_address && + sas_device->slot == slot) { + sas_device->responding = 1; + starget = sas_device->starget; + if (starget && starget->hostdata) { + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->tm_busy = 0; + sas_target_priv_data->deleted = 0; + } else + sas_target_priv_data = NULL; + if (starget) + starget_printk(KERN_INFO, starget, + "handle(0x%04x), sas_addr(0x%016llx), " + "enclosure logical id(0x%016llx), " + "slot(%d)\n", handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + if (sas_device->handle == handle) + goto out; + pr_info("\thandle changed from(0x%04x)!!!\n", + sas_device->handle); + sas_device->handle = handle; + if (sas_target_priv_data) + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_search_responding_sas_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 handle; + u32 device_info; + + pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name); + + if (list_empty(&ioc->sas_device_list)) + goto out; + + handle = 0xFFFF; + while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(sas_device_pg0.DevHandle); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + continue; + _scsih_mark_responding_sas_device(ioc, + le64_to_cpu(sas_device_pg0.SASAddress), + le16_to_cpu(sas_device_pg0.Slot), handle); + } + + out: + pr_info(MPT3SAS_FMT "search for end-devices: complete\n", + ioc->name); +} + +/** + * _scsih_mark_responding_raid_device - mark a raid_device as responding + * @ioc: per adapter object + * @wwid: world wide identifier for raid volume + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsih_remove_unresponsive_raid_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid, + u16 handle) +{ + struct MPT3SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid == wwid && raid_device->starget) { + starget = raid_device->starget; + if (starget && starget->hostdata) { + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->deleted = 0; + } else + sas_target_priv_data = NULL; + raid_device->responding = 1; + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + starget_printk(KERN_INFO, raid_device->starget, + "handle(0x%04x), wwid(0x%016llx)\n", handle, + (unsigned long long)raid_device->wwid); + spin_lock_irqsave(&ioc->raid_device_lock, flags); + if (raid_device->handle == handle) { + spin_unlock_irqrestore(&ioc->raid_device_lock, + flags); + return; + } + pr_info("\thandle changed from(0x%04x)!!!\n", + raid_device->handle); + raid_device->handle = handle; + if (sas_target_priv_data) + sas_target_priv_data->handle = handle; + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return; + } + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_search_responding_raid_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t volume_pg1; + Mpi2RaidVolPage0_t volume_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 handle; + u8 phys_disk_num; + + if (!ioc->ir_firmware) + return; + + pr_info(MPT3SAS_FMT "search for raid volumes: start\n", + ioc->name); + + if (list_empty(&ioc->raid_device_list)) + goto out; + + handle = 0xFFFF; + while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(volume_pg1.DevHandle); + + if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, + &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + sizeof(Mpi2RaidVolPage0_t))) + continue; + + if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) + _scsih_mark_responding_raid_device(ioc, + le64_to_cpu(volume_pg1.WWID), handle); + } + + /* refresh the pd_handles */ + phys_disk_num = 0xFF; + memset(ioc->pd_handles, 0, ioc->pd_handles_sz); + while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, + phys_disk_num))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + phys_disk_num = pd_pg0.PhysDiskNum; + handle = le16_to_cpu(pd_pg0.DevHandle); + set_bit(handle, ioc->pd_handles); + } + out: + pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n", + ioc->name); +} + +/** + * _scsih_mark_responding_expander - mark a expander as responding + * @ioc: per adapter object + * @sas_address: sas address + * @handle: + * + * After host reset, find out whether devices are still responding. + * Used in _scsih_remove_unresponsive_expanders. + * + * Return nothing. + */ +static void +_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address != sas_address) + continue; + sas_expander->responding = 1; + if (sas_expander->handle == handle) + goto out; + pr_info("\texpander(0x%016llx): handle changed" \ + " from(0x%04x) to (0x%04x)!!!\n", + (unsigned long long)sas_expander->sas_address, + sas_expander->handle, handle); + sas_expander->handle = handle; + for (i = 0 ; i < sas_expander->num_phys ; i++) + sas_expander->phy[i].handle = handle; + goto out; + } + out: + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_search_responding_expanders - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u64 sas_address; + u16 handle; + + pr_info(MPT3SAS_FMT "search for expanders: start\n", ioc->name); + + if (list_empty(&ioc->sas_expander_list)) + goto out; + + handle = 0xFFFF; + while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + + handle = le16_to_cpu(expander_pg0.DevHandle); + sas_address = le64_to_cpu(expander_pg0.SASAddress); + pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n", + handle, + (unsigned long long)sas_address); + _scsih_mark_responding_expander(ioc, sas_address, handle); + } + + out: + pr_info(MPT3SAS_FMT "search for expanders: complete\n", ioc->name); +} + +/** + * _scsih_remove_unresponding_sas_devices - removing unresponding devices + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *sas_device_next; + struct _sas_node *sas_expander, *sas_expander_next; + struct _raid_device *raid_device, *raid_device_next; + struct list_head tmp_list; + unsigned long flags; + + pr_info(MPT3SAS_FMT "removing unresponding devices: start\n", + ioc->name); + + /* removing unresponding end devices */ + pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n", + ioc->name); + list_for_each_entry_safe(sas_device, sas_device_next, + &ioc->sas_device_list, list) { + if (!sas_device->responding) + mpt3sas_device_remove_by_sas_address(ioc, + sas_device->sas_address); + else + sas_device->responding = 0; + } + + /* removing unresponding volumes */ + if (ioc->ir_firmware) { + pr_info(MPT3SAS_FMT "removing unresponding devices: volumes\n", + ioc->name); + list_for_each_entry_safe(raid_device, raid_device_next, + &ioc->raid_device_list, list) { + if (!raid_device->responding) + _scsih_sas_volume_delete(ioc, + raid_device->handle); + else + raid_device->responding = 0; + } + } + + /* removing unresponding expanders */ + pr_info(MPT3SAS_FMT "removing unresponding devices: expanders\n", + ioc->name); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + INIT_LIST_HEAD(&tmp_list); + list_for_each_entry_safe(sas_expander, sas_expander_next, + &ioc->sas_expander_list, list) { + if (!sas_expander->responding) + list_move_tail(&sas_expander->list, &tmp_list); + else + sas_expander->responding = 0; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list, + list) { + list_del(&sas_expander->list); + _scsih_expander_node_remove(ioc, sas_expander); + } + + pr_info(MPT3SAS_FMT "removing unresponding devices: complete\n", + ioc->name); + + /* unblock devices */ + _scsih_ublock_io_all_device(ioc); +} + +static void +_scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_expander, u16 handle) +{ + Mpi2ExpanderPage1_t expander_pg1; + Mpi2ConfigReply_t mpi_reply; + int i; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + mpt3sas_transport_update_links(ioc, sas_expander->sas_address, + le16_to_cpu(expander_pg1.AttachedDevHandle), i, + expander_pg1.NegotiatedLinkRate >> 4); + } +} + +/** + * _scsih_scan_for_devices_after_reset - scan for devices after host reset + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2ExpanderPage0_t expander_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2RaidVolPage1_t volume_pg1; + Mpi2RaidVolPage0_t volume_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2EventIrConfigElement_t element; + Mpi2ConfigReply_t mpi_reply; + u8 phys_disk_num; + u16 ioc_status; + u16 handle, parent_handle; + u64 sas_address; + struct _sas_device *sas_device; + struct _sas_node *expander_device; + static struct _raid_device *raid_device; + u8 retry_count; + unsigned long flags; + + pr_info(MPT3SAS_FMT "scan devices: start\n", ioc->name); + + _scsih_sas_host_refresh(ioc); + + pr_info(MPT3SAS_FMT "\tscan devices: expanders start\n", ioc->name); + + /* expanders */ + handle = 0xFFFF; + while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \ + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + handle = le16_to_cpu(expander_pg0.DevHandle); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_device = mpt3sas_scsih_expander_find_by_sas_address( + ioc, le64_to_cpu(expander_pg0.SASAddress)); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (expander_device) + _scsih_refresh_expander_links(ioc, expander_device, + handle); + else { + pr_info(MPT3SAS_FMT "\tBEFORE adding expander: " \ + "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name, + handle, (unsigned long long) + le64_to_cpu(expander_pg0.SASAddress)); + _scsih_expander_add(ioc, handle); + pr_info(MPT3SAS_FMT "\tAFTER adding expander: " \ + "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name, + handle, (unsigned long long) + le64_to_cpu(expander_pg0.SASAddress)); + } + } + + pr_info(MPT3SAS_FMT "\tscan devices: expanders complete\n", + ioc->name); + + if (!ioc->ir_firmware) + goto skip_to_sas; + + pr_info(MPT3SAS_FMT "\tscan devices: phys disk start\n", ioc->name); + + /* phys disk */ + phys_disk_num = 0xFF; + while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, + phys_disk_num))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\ + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + phys_disk_num = pd_pg0.PhysDiskNum; + handle = le16_to_cpu(pd_pg0.DevHandle); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + continue; + if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + handle) != 0) + continue; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from phys disk scan " \ + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, + &sas_address)) { + pr_info(MPT3SAS_FMT "\tBEFORE adding phys disk: " \ + " handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); + mpt3sas_transport_update_links(ioc, sas_address, + handle, sas_device_pg0.PhyNum, + MPI2_SAS_NEG_LINK_RATE_1_5); + set_bit(handle, ioc->pd_handles); + retry_count = 0; + /* This will retry adding the end device. + * _scsih_add_device() will decide on retries and + * return "1" when it should be retried + */ + while (_scsih_add_device(ioc, handle, retry_count++, + 1)) { + ssleep(1); + } + pr_info(MPT3SAS_FMT "\tAFTER adding phys disk: " \ + " handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); + } + } + + pr_info(MPT3SAS_FMT "\tscan devices: phys disk complete\n", + ioc->name); + + pr_info(MPT3SAS_FMT "\tscan devices: volumes start\n", ioc->name); + + /* volumes */ + handle = 0xFFFF; + while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \ + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + handle = le16_to_cpu(volume_pg1.DevHandle); + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_wwid(ioc, + le64_to_cpu(volume_pg1.WWID)); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (raid_device) + continue; + if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, + &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + sizeof(Mpi2RaidVolPage0_t))) + continue; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \ + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { + memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); + element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; + element.VolDevHandle = volume_pg1.DevHandle; + pr_info(MPT3SAS_FMT + "\tBEFORE adding volume: handle (0x%04x)\n", + ioc->name, volume_pg1.DevHandle); + _scsih_sas_volume_add(ioc, &element); + pr_info(MPT3SAS_FMT + "\tAFTER adding volume: handle (0x%04x)\n", + ioc->name, volume_pg1.DevHandle); + } + } + + pr_info(MPT3SAS_FMT "\tscan devices: volumes complete\n", + ioc->name); + + skip_to_sas: + + pr_info(MPT3SAS_FMT "\tscan devices: end devices start\n", + ioc->name); + + /* sas devices */ + handle = 0xFFFF; + while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\ + " ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } + handle = le16_to_cpu(sas_device_pg0.DevHandle); + if (!(_scsih_is_end_device( + le32_to_cpu(sas_device_pg0.DeviceInfo)))) + continue; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + le64_to_cpu(sas_device_pg0.SASAddress)); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + continue; + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { + pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \ + "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name, + handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); + mpt3sas_transport_update_links(ioc, sas_address, handle, + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + retry_count = 0; + /* This will retry adding the end device. + * _scsih_add_device() will decide on retries and + * return "1" when it should be retried + */ + while (_scsih_add_device(ioc, handle, retry_count++, + 0)) { + ssleep(1); + } + pr_info(MPT3SAS_FMT "\tAFTER adding end device: " \ + "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name, + handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); + } + } + pr_info(MPT3SAS_FMT "\tscan devices: end devices complete\n", + ioc->name); + + pr_info(MPT3SAS_FMT "scan devices: complete\n", ioc->name); +} +/** + * mpt3sas_scsih_reset_handler - reset callback handler (for scsih) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET, + * MPT3_IOC_DONE_RESET + * + * Return nothing. + */ +void +mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT3_IOC_PRE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT3_IOC_AFTER_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->scsih_cmds.status & MPT3_CMD_PENDING) { + ioc->scsih_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->scsih_cmds.smid); + complete(&ioc->scsih_cmds.done); + } + if (ioc->tm_cmds.status & MPT3_CMD_PENDING) { + ioc->tm_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->tm_cmds.smid); + complete(&ioc->tm_cmds.done); + } + + _scsih_fw_event_cleanup_queue(ioc); + _scsih_flush_running_cmds(ioc); + break; + case MPT3_IOC_DONE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__)); + if ((!ioc->is_driver_loading) && !(disable_discovery > 0 && + !ioc->sas_hba.num_phys)) { + _scsih_prep_device_scan(ioc); + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + _scsih_error_recovery_delete_devices(ioc); + } + break; + } +} + +/** + * _mpt3sas_fw_work - delayed task for processing firmware events + * @ioc: per adapter object + * @fw_event: The fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) +{ + /* the queue is being flushed so ignore this event */ + if (ioc->remove_host || fw_event->cancel_pending_work || + ioc->pci_error_recovery) { + _scsih_fw_event_free(ioc, fw_event); + return; + } + + switch (fw_event->event) { + case MPT3SAS_PROCESS_TRIGGER_DIAG: + mpt3sas_process_trigger_data(ioc, fw_event->event_data); + break; + case MPT3SAS_REMOVE_UNRESPONDING_DEVICES: + while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery) + ssleep(1); + _scsih_remove_unresponding_sas_devices(ioc); + _scsih_scan_for_devices_after_reset(ioc); + break; + case MPT3SAS_PORT_ENABLE_COMPLETE: + ioc->start_scan = 0; + if (missing_delay[0] != -1 && missing_delay[1] != -1) + mpt3sas_base_update_missing_delay(ioc, missing_delay[0], + missing_delay[1]); + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "port enable: complete from worker thread\n", + ioc->name)); + break; + case MPT3SAS_TURN_ON_FAULT_LED: + _scsih_turn_on_fault_led(ioc, fw_event->device_handle); + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_sas_topology_change_event(ioc, fw_event); + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + _scsih_sas_device_status_change_event(ioc, fw_event); + break; + case MPI2_EVENT_SAS_DISCOVERY: + _scsih_sas_discovery_event(ioc, fw_event); + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + _scsih_sas_broadcast_primitive_event(ioc, fw_event); + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + _scsih_sas_enclosure_dev_status_change_event(ioc, + fw_event); + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + _scsih_sas_ir_config_change_event(ioc, fw_event); + break; + case MPI2_EVENT_IR_VOLUME: + _scsih_sas_ir_volume_event(ioc, fw_event); + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + _scsih_sas_ir_physical_disk_event(ioc, fw_event); + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + _scsih_sas_ir_operation_status_event(ioc, fw_event); + break; + } + _scsih_fw_event_free(ioc, fw_event); +} + +/** + * _firmware_event_work + * @ioc: per adapter object + * @work: The fw_event_work object + * Context: user. + * + * wrappers for the work thread handling firmware events + * + * Return nothing. + */ + +static void +_firmware_event_work(struct work_struct *work) +{ + struct fw_event_work *fw_event = container_of(work, + struct fw_event_work, work); + + _mpt3sas_fw_work(fw_event->ioc, fw_event); +} + +/** + * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, + u32 reply) +{ + struct fw_event_work *fw_event; + Mpi2EventNotificationReply_t *mpi_reply; + u16 event; + u16 sz; + + /* events turned off due to host reset or driver unloading */ + if (ioc->remove_host || ioc->pci_error_recovery) + return 1; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + + if (unlikely(!mpi_reply)) { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 1; + } + + event = le16_to_cpu(mpi_reply->Event); + + if (event != MPI2_EVENT_LOG_ENTRY_ADDED) + mpt3sas_trigger_event(ioc, event, 0); + + switch (event) { + /* handle these */ + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + { + Mpi2EventDataSasBroadcastPrimitive_t *baen_data = + (Mpi2EventDataSasBroadcastPrimitive_t *) + mpi_reply->EventData; + + if (baen_data->Primitive != + MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT) + return 1; + + if (ioc->broadcast_aen_busy) { + ioc->broadcast_aen_pending++; + return 1; + } else + ioc->broadcast_aen_busy = 1; + break; + } + + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_check_topo_delete_events(ioc, + (Mpi2EventDataSasTopologyChangeList_t *) + mpi_reply->EventData); + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + _scsih_check_ir_config_unhide_events(ioc, + (Mpi2EventDataIrConfigChangeList_t *) + mpi_reply->EventData); + break; + case MPI2_EVENT_IR_VOLUME: + _scsih_check_volume_delete_events(ioc, + (Mpi2EventDataIrVolume_t *) + mpi_reply->EventData); + break; + + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_OPERATION_STATUS: + case MPI2_EVENT_SAS_DISCOVERY: + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_PHYSICAL_DISK: + break; + + default: /* ignore the rest */ + return 1; + } + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 1; + } + sz = le16_to_cpu(mpi_reply->EventDataLength) * 4; + fw_event->event_data = kzalloc(sz, GFP_ATOMIC); + if (!fw_event->event_data) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(fw_event); + return 1; + } + + memcpy(fw_event->event_data, mpi_reply->EventData, sz); + fw_event->ioc = ioc; + fw_event->VF_ID = mpi_reply->VF_ID; + fw_event->VP_ID = mpi_reply->VP_ID; + fw_event->event = event; + _scsih_fw_event_add(ioc, fw_event); + return 1; +} + +/* shost template */ +static struct scsi_host_template scsih_driver_template = { + .module = THIS_MODULE, + .name = "Fusion MPT SAS Host", + .proc_name = MPT3SAS_DRIVER_NAME, + .queuecommand = _scsih_qcmd, + .target_alloc = _scsih_target_alloc, + .slave_alloc = _scsih_slave_alloc, + .slave_configure = _scsih_slave_configure, + .target_destroy = _scsih_target_destroy, + .slave_destroy = _scsih_slave_destroy, + .scan_finished = _scsih_scan_finished, + .scan_start = _scsih_scan_start, + .change_queue_depth = _scsih_change_queue_depth, + .change_queue_type = _scsih_change_queue_type, + .eh_abort_handler = _scsih_abort, + .eh_device_reset_handler = _scsih_dev_reset, + .eh_target_reset_handler = _scsih_target_reset, + .eh_host_reset_handler = _scsih_host_reset, + .bios_param = _scsih_bios_param, + .can_queue = 1, + .this_id = -1, + .sg_tablesize = MPT3SAS_SG_DEPTH, + .max_sectors = 32767, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = mpt3sas_host_attrs, + .sdev_attrs = mpt3sas_dev_attrs, +}; + +/** + * _scsih_expander_node_remove - removing expander device from list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt3sas_port, *next; + + /* remove sibling ports attached to this expander */ + list_for_each_entry_safe(mpt3sas_port, next, + &sas_expander->sas_port_list, port_list) { + if (ioc->shost_recovery) + return; + if (mpt3sas_port->remote_identify.device_type == + SAS_END_DEVICE) + mpt3sas_device_remove_by_sas_address(ioc, + mpt3sas_port->remote_identify.sas_address); + else if (mpt3sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mpt3sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) + mpt3sas_expander_remove(ioc, + mpt3sas_port->remote_identify.sas_address); + } + + mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_expander->sas_address_parent); + + pr_info(MPT3SAS_FMT + "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n", + ioc->name, + sas_expander->handle, (unsigned long long) + sas_expander->sas_address); + + kfree(sas_expander->phy); + kfree(sas_expander); +} + +/** + * _scsih_ir_shutdown - IR shutdown notification + * @ioc: per adapter object + * + * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that + * the host system is shutting down. + * + * Return nothing. + */ +static void +_scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2RaidActionRequest_t *mpi_request; + Mpi2RaidActionReply_t *mpi_reply; + u16 smid; + + /* is IR firmware build loaded ? */ + if (!ioc->ir_firmware) + return; + + /* are there any volumes ? */ + if (list_empty(&ioc->raid_device_list)) + return; + + mutex_lock(&ioc->scsih_cmds.mutex); + + if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n", + ioc->name, __func__); + goto out; + } + ioc->scsih_cmds.status = MPT3_CMD_PENDING; + + smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->scsih_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t)); + + mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; + mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; + + pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name); + init_completion(&ioc->scsih_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); + + if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + goto out; + } + + if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { + mpi_reply = ioc->scsih_cmds.reply; + pr_info(MPT3SAS_FMT + "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); + } + + out: + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + mutex_unlock(&ioc->scsih_cmds.mutex); +} + +/** + * _scsih_remove - detach and remove add host + * @pdev: PCI device struct + * + * Routine called when unloading the driver. + * Return nothing. + */ +static void __devexit +_scsih_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct _sas_port *mpt3sas_port, *next_port; + struct _raid_device *raid_device, *next; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_cleanup_queue(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); + + /* release all the volumes */ + _scsih_ir_shutdown(ioc); + list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, + list) { + if (raid_device->starget) { + sas_target_priv_data = + raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n", + ioc->name, raid_device->handle, + (unsigned long long) raid_device->wwid); + _scsih_raid_device_remove(ioc, raid_device); + } + + /* free ports attached to the sas_host */ + list_for_each_entry_safe(mpt3sas_port, next_port, + &ioc->sas_hba.sas_port_list, port_list) { + if (mpt3sas_port->remote_identify.device_type == + SAS_END_DEVICE) + mpt3sas_device_remove_by_sas_address(ioc, + mpt3sas_port->remote_identify.sas_address); + else if (mpt3sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mpt3sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) + mpt3sas_expander_remove(ioc, + mpt3sas_port->remote_identify.sas_address); + } + + /* free phys attached to the sas_host */ + if (ioc->sas_hba.num_phys) { + kfree(ioc->sas_hba.phy); + ioc->sas_hba.phy = NULL; + ioc->sas_hba.num_phys = 0; + } + + sas_remove_host(shost); + mpt3sas_base_detach(ioc); + list_del(&ioc->list); + scsi_remove_host(shost); + scsi_host_put(shost); +} + +/** + * _scsih_shutdown - routine call during system shutdown + * @pdev: PCI device struct + * + * Return nothing. + */ +static void +_scsih_shutdown(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_cleanup_queue(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); + + _scsih_ir_shutdown(ioc); + mpt3sas_base_detach(ioc); +} + + +/** + * _scsih_probe_boot_devices - reports 1st device + * @ioc: per adapter object + * + * If specified in bios page 2, this routine reports the 1st + * device scsi-ml or sas transport for persistent boot device + * purposes. Please refer to function _scsih_determine_boot_device() + */ +static void +_scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) +{ + u8 is_raid; + void *device; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u16 handle; + u64 sas_address_parent; + u64 sas_address; + unsigned long flags; + int rc; + + /* no Bios, return immediately */ + if (!ioc->bios_pg3.BiosVersion) + return; + + device = NULL; + is_raid = 0; + if (ioc->req_boot_device.device) { + device = ioc->req_boot_device.device; + is_raid = ioc->req_boot_device.is_raid; + } else if (ioc->req_alt_boot_device.device) { + device = ioc->req_alt_boot_device.device; + is_raid = ioc->req_alt_boot_device.is_raid; + } else if (ioc->current_boot_device.device) { + device = ioc->current_boot_device.device; + is_raid = ioc->current_boot_device.is_raid; + } + + if (!device) + return; + + if (is_raid) { + raid_device = device; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = device; + handle = sas_device->handle; + sas_address_parent = sas_device->sas_address_parent; + sas_address = sas_device->sas_address; + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!mpt3sas_transport_port_add(ioc, handle, + sas_address_parent)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + if (!ioc->is_driver_loading) + mpt3sas_transport_port_remove(ioc, sas_address, + sas_address_parent); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_raid - reporting raid volumes to scsi-ml + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc) +{ + struct _raid_device *raid_device, *raid_next; + int rc; + + list_for_each_entry_safe(raid_device, raid_next, + &ioc->raid_device_list, list) { + if (raid_device->starget) + continue; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } +} + +/** + * _scsih_probe_sas - reporting sas devices to sas transport + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *next; + unsigned long flags; + + /* SAS Device List */ + list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, + list) { + + if (!mpt3sas_transport_port_add(ioc, sas_device->handle, + sas_device->sas_address_parent)) { + list_del(&sas_device->list); + kfree(sas_device); + continue; + } else if (!sas_device->starget) { + /* + * When asyn scanning is enabled, its not possible to + * remove devices while scanning is turned on due to an + * oops in scsi_sysfs_add_sdev()->add_device()-> + * sysfs_addrm_start() + */ + if (!ioc->is_driver_loading) + mpt3sas_transport_port_remove(ioc, + sas_device->sas_address, + sas_device->sas_address_parent); + list_del(&sas_device->list); + kfree(sas_device); + continue; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } +} + +/** + * _scsih_probe_devices - probing for devices + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc) +{ + u16 volume_mapping_flags; + + if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) + return; /* return when IOC doesn't support initiator mode */ + + _scsih_probe_boot_devices(ioc); + + if (ioc->ir_firmware) { + volume_mapping_flags = + le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & + MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + if (volume_mapping_flags == + MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { + _scsih_probe_raid(ioc); + _scsih_probe_sas(ioc); + } else { + _scsih_probe_sas(ioc); + _scsih_probe_raid(ioc); + } + } else + _scsih_probe_sas(ioc); +} + +/** + * _scsih_scan_start - scsi lld callback for .scan_start + * @shost: SCSI host pointer + * + * The shost has the ability to discover targets on its own instead + * of scanning the entire bus. In our implemention, we will kick off + * firmware discovery. + */ +static void +_scsih_scan_start(struct Scsi_Host *shost) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + int rc; + if (diag_buffer_enable != -1 && diag_buffer_enable != 0) + mpt3sas_enable_diag_buffer(ioc, diag_buffer_enable); + + if (disable_discovery > 0) + return; + + ioc->start_scan = 1; + rc = mpt3sas_port_enable(ioc); + + if (rc != 0) + pr_info(MPT3SAS_FMT "port enable: FAILED\n", ioc->name); +} + +/** + * _scsih_scan_finished - scsi lld callback for .scan_finished + * @shost: SCSI host pointer + * @time: elapsed time of the scan in jiffies + * + * This function will be called periodicallyn until it returns 1 with the + * scsi_host and the elapsed time of the scan in jiffies. In our implemention, + * we wait for firmware discovery to complete, then return 1. + */ +static int +_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + if (disable_discovery > 0) { + ioc->is_driver_loading = 0; + ioc->wait_for_discovery_to_complete = 0; + return 1; + } + + if (time >= (300 * HZ)) { + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + pr_info(MPT3SAS_FMT + "port enable: FAILED with timeout (timeout=300s)\n", + ioc->name); + ioc->is_driver_loading = 0; + return 1; + } + + if (ioc->start_scan) + return 0; + + if (ioc->start_scan_failed) { + pr_info(MPT3SAS_FMT + "port enable: FAILED with (ioc_status=0x%08x)\n", + ioc->name, ioc->start_scan_failed); + ioc->is_driver_loading = 0; + ioc->wait_for_discovery_to_complete = 0; + ioc->remove_host = 1; + return 1; + } + + pr_info(MPT3SAS_FMT "port enable: SUCCESS\n", ioc->name); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + + if (ioc->wait_for_discovery_to_complete) { + ioc->wait_for_discovery_to_complete = 0; + _scsih_probe_devices(ioc); + } + mpt3sas_base_start_watchdog(ioc); + ioc->is_driver_loading = 0; + return 1; +} + +/** + * _scsih_probe - attach and add scsi host + * @pdev: PCI device struct + * @id: pci device id + * + * Returns 0 success, anything else error. + */ +static int +_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct MPT3SAS_ADAPTER *ioc; + struct Scsi_Host *shost; + + shost = scsi_host_alloc(&scsih_driver_template, + sizeof(struct MPT3SAS_ADAPTER)); + if (!shost) + return -ENODEV; + + /* init local params */ + ioc = shost_priv(shost); + memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER)); + INIT_LIST_HEAD(&ioc->list); + list_add_tail(&ioc->list, &mpt3sas_ioc_list); + ioc->shost = shost; + ioc->id = mpt_ids++; + sprintf(ioc->name, "%s%d", MPT3SAS_DRIVER_NAME, ioc->id); + ioc->pdev = pdev; + ioc->scsi_io_cb_idx = scsi_io_cb_idx; + ioc->tm_cb_idx = tm_cb_idx; + ioc->ctl_cb_idx = ctl_cb_idx; + ioc->base_cb_idx = base_cb_idx; + ioc->port_enable_cb_idx = port_enable_cb_idx; + ioc->transport_cb_idx = transport_cb_idx; + ioc->scsih_cb_idx = scsih_cb_idx; + ioc->config_cb_idx = config_cb_idx; + ioc->tm_tr_cb_idx = tm_tr_cb_idx; + ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx; + ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx; + ioc->logging_level = logging_level; + ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds; + /* misc semaphores and spin locks */ + mutex_init(&ioc->reset_in_progress_mutex); + spin_lock_init(&ioc->ioc_reset_in_progress_lock); + spin_lock_init(&ioc->scsi_lookup_lock); + spin_lock_init(&ioc->sas_device_lock); + spin_lock_init(&ioc->sas_node_lock); + spin_lock_init(&ioc->fw_event_lock); + spin_lock_init(&ioc->raid_device_lock); + spin_lock_init(&ioc->diag_trigger_lock); + + INIT_LIST_HEAD(&ioc->sas_device_list); + INIT_LIST_HEAD(&ioc->sas_device_init_list); + INIT_LIST_HEAD(&ioc->sas_expander_list); + INIT_LIST_HEAD(&ioc->fw_event_list); + INIT_LIST_HEAD(&ioc->raid_device_list); + INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); + INIT_LIST_HEAD(&ioc->delayed_tr_list); + INIT_LIST_HEAD(&ioc->delayed_tr_volume_list); + + /* init shost parameters */ + shost->max_cmd_len = 32; + shost->max_lun = max_lun; + shost->transportt = mpt3sas_transport_template; + shost->unique_id = ioc->id; + + if (max_sectors != 0xFFFF) { + if (max_sectors < 64) { + shost->max_sectors = 64; + pr_warn(MPT3SAS_FMT "Invalid value %d passed " \ + "for max_sectors, range is 64 to 32767. Assigning " + "value of 64.\n", ioc->name, max_sectors); + } else if (max_sectors > 32767) { + shost->max_sectors = 32767; + pr_warn(MPT3SAS_FMT "Invalid value %d passed " \ + "for max_sectors, range is 64 to 32767. Assigning " + "default value of 32767.\n", ioc->name, + max_sectors); + } else { + shost->max_sectors = max_sectors & 0xFFFE; + pr_info(MPT3SAS_FMT + "The max_sectors value is set to %d\n", + ioc->name, shost->max_sectors); + } + } + + if ((scsi_add_host(shost, &pdev->dev))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + list_del(&ioc->list); + goto out_add_shost_fail; + } + + /* register EEDP capabilities with SCSI layer */ + if (prot_mask > 0) + scsi_host_set_prot(shost, prot_mask); + else + scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION + | SHOST_DIF_TYPE2_PROTECTION + | SHOST_DIF_TYPE3_PROTECTION); + + scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); + + /* event thread */ + snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), + "fw_event%d", ioc->id); + ioc->firmware_event_thread = create_singlethread_workqueue( + ioc->firmware_event_name); + if (!ioc->firmware_event_thread) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_thread_fail; + } + + ioc->is_driver_loading = 1; + if ((mpt3sas_base_attach(ioc))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_attach_fail; + } + scsi_scan_host(shost); + return 0; + + out_attach_fail: + destroy_workqueue(ioc->firmware_event_thread); + out_thread_fail: + list_del(&ioc->list); + scsi_remove_host(shost); + out_add_shost_fail: + scsi_host_put(shost); + return -ENODEV; +} + +#ifdef CONFIG_PM +/** + * _scsih_suspend - power management suspend main entry point + * @pdev: PCI device struct + * @state: PM state change to (usually PCI_D3) + * + * Returns 0 success, anything else error. + */ +static int +_scsih_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + pci_power_t device_state; + + mpt3sas_base_stop_watchdog(ioc); + flush_scheduled_work(); + scsi_block_requests(shost); + device_state = pci_choose_state(pdev, state); + pr_info(MPT3SAS_FMT + "pdev=0x%p, slot=%s, entering operating state [D%d]\n", + ioc->name, pdev, pci_name(pdev), device_state); + + pci_save_state(pdev); + mpt3sas_base_free_resources(ioc); + pci_set_power_state(pdev, device_state); + return 0; +} + +/** + * _scsih_resume - power management resume main entry point + * @pdev: PCI device struct + * + * Returns 0 success, anything else error. + */ +static int +_scsih_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + pci_power_t device_state = pdev->current_state; + int r; + + pr_info(MPT3SAS_FMT + "pdev=0x%p, slot=%s, previous operating state [D%d]\n", + ioc->name, pdev, pci_name(pdev), device_state); + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + ioc->pdev = pdev; + r = mpt3sas_base_map_resources(ioc); + if (r) + return r; + + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + scsi_unblock_requests(shost); + mpt3sas_base_start_watchdog(ioc); + return 0; +} +#endif /* CONFIG_PM */ + +/** + * _scsih_pci_error_detected - Called when a PCI error is detected. + * @pdev: PCI device struct + * @state: PCI channel state + * + * Description: Called when a PCI error is detected. + * + * Return value: + * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT + */ +static pci_ers_result_t +_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + pr_info(MPT3SAS_FMT "PCI error: detected callback, state(%d)!!\n", + ioc->name, state); + + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + /* Fatal error, prepare for slot reset */ + ioc->pci_error_recovery = 1; + scsi_block_requests(ioc->shost); + mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_free_resources(ioc); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + /* Permanent error, prepare for device removal */ + ioc->pci_error_recovery = 1; + mpt3sas_base_stop_watchdog(ioc); + _scsih_flush_running_cmds(ioc); + return PCI_ERS_RESULT_DISCONNECT; + } + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * _scsih_pci_slot_reset - Called when PCI slot has been reset. + * @pdev: PCI device struct + * + * Description: This routine is called by the pci error recovery + * code after the PCI slot has been reset, just before we + * should resume normal operations. + */ +static pci_ers_result_t +_scsih_pci_slot_reset(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + int rc; + + pr_info(MPT3SAS_FMT "PCI error: slot reset callback!!\n", + ioc->name); + + ioc->pci_error_recovery = 0; + ioc->pdev = pdev; + pci_restore_state(pdev); + rc = mpt3sas_base_map_resources(ioc); + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name, + (rc == 0) ? "success" : "failed"); + + if (!rc) + return PCI_ERS_RESULT_RECOVERED; + else + return PCI_ERS_RESULT_DISCONNECT; +} + +/** + * _scsih_pci_resume() - resume normal ops after PCI reset + * @pdev: pointer to PCI device + * + * Called when the error recovery driver tells us that its + * OK to resume normal operation. Use completion to allow + * halted scsi ops to resume. + */ +static void +_scsih_pci_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + pr_info(MPT3SAS_FMT "PCI error: resume callback!!\n", ioc->name); + + pci_cleanup_aer_uncorrect_error_status(pdev); + mpt3sas_base_start_watchdog(ioc); + scsi_unblock_requests(ioc->shost); +} + +/** + * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers + * @pdev: pointer to PCI device + */ +static pci_ers_result_t +_scsih_pci_mmio_enabled(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + pr_info(MPT3SAS_FMT "PCI error: mmio enabled callback!!\n", + ioc->name); + + /* TODO - dump whatever for debugging purposes */ + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/* raid transport support */ +static struct raid_function_template mpt3sas_raid_functions = { + .cookie = &scsih_driver_template, + .is_raid = _scsih_is_raid, + .get_resync = _scsih_get_resync, + .get_state = _scsih_get_state, +}; + +static struct pci_error_handlers _scsih_err_handler = { + .error_detected = _scsih_pci_error_detected, + .mmio_enabled = _scsih_pci_mmio_enabled, + .slot_reset = _scsih_pci_slot_reset, + .resume = _scsih_pci_resume, +}; + +static struct pci_driver scsih_driver = { + .name = MPT3SAS_DRIVER_NAME, + .id_table = scsih_pci_table, + .probe = _scsih_probe, + .remove = __devexit_p(_scsih_remove), + .shutdown = _scsih_shutdown, + .err_handler = &_scsih_err_handler, +#ifdef CONFIG_PM + .suspend = _scsih_suspend, + .resume = _scsih_resume, +#endif +}; + + +/** + * _scsih_init - main entry point for this driver. + * + * Returns 0 success, anything else error. + */ +static int __init +_scsih_init(void) +{ + int error; + + mpt_ids = 0; + + pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME, + MPT3SAS_DRIVER_VERSION); + + mpt3sas_transport_template = + sas_attach_transport(&mpt3sas_transport_functions); + if (!mpt3sas_transport_template) + return -ENODEV; + +/* raid transport support */ + mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions); + if (!mpt3sas_raid_template) { + sas_release_transport(mpt3sas_transport_template); + return -ENODEV; + } + + mpt3sas_base_initialize_callback_handler(); + + /* queuecommand callback hander */ + scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done); + + /* task managment callback handler */ + tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done); + + /* base internal commands callback handler */ + base_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_base_done); + port_enable_cb_idx = mpt3sas_base_register_callback_handler( + mpt3sas_port_enable_done); + + /* transport internal commands callback handler */ + transport_cb_idx = mpt3sas_base_register_callback_handler( + mpt3sas_transport_done); + + /* scsih internal commands callback handler */ + scsih_cb_idx = mpt3sas_base_register_callback_handler(_scsih_done); + + /* configuration page API internal commands callback handler */ + config_cb_idx = mpt3sas_base_register_callback_handler( + mpt3sas_config_done); + + /* ctl module callback handler */ + ctl_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_ctl_done); + + tm_tr_cb_idx = mpt3sas_base_register_callback_handler( + _scsih_tm_tr_complete); + + tm_tr_volume_cb_idx = mpt3sas_base_register_callback_handler( + _scsih_tm_volume_tr_complete); + + tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler( + _scsih_sas_control_complete); + + mpt3sas_ctl_init(); + + error = pci_register_driver(&scsih_driver); + if (error) { + /* raid transport support */ + raid_class_release(mpt3sas_raid_template); + sas_release_transport(mpt3sas_transport_template); + } + + return error; +} + +/** + * _scsih_exit - exit point for this driver (when it is a module). + * + * Returns 0 success, anything else error. + */ +static void __exit +_scsih_exit(void) +{ + pr_info("mpt3sas version %s unloading\n", + MPT3SAS_DRIVER_VERSION); + + mpt3sas_ctl_exit(); + + pci_unregister_driver(&scsih_driver); + + + mpt3sas_base_release_callback_handler(scsi_io_cb_idx); + mpt3sas_base_release_callback_handler(tm_cb_idx); + mpt3sas_base_release_callback_handler(base_cb_idx); + mpt3sas_base_release_callback_handler(port_enable_cb_idx); + mpt3sas_base_release_callback_handler(transport_cb_idx); + mpt3sas_base_release_callback_handler(scsih_cb_idx); + mpt3sas_base_release_callback_handler(config_cb_idx); + mpt3sas_base_release_callback_handler(ctl_cb_idx); + + mpt3sas_base_release_callback_handler(tm_tr_cb_idx); + mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx); + mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx); + +/* raid transport support */ + raid_class_release(mpt3sas_raid_template); + sas_release_transport(mpt3sas_transport_template); +} + +module_init(_scsih_init); +module_exit(_scsih_exit); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c new file mode 100644 index 0000000..87ca2b7 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -0,0 +1,2128 @@ +/* + * SAS Transport Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt3sas_base.h" + +/** + * _transport_sas_node_find_by_sas_address - sas node search + * @ioc: per adapter object + * @sas_address: sas address of expander or sas host + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Search for either hba phys or expander device based on handle, then returns + * the sas_node object. + */ +static struct _sas_node * +_transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address) +{ + if (ioc->sas_hba.sas_address == sas_address) + return &ioc->sas_hba; + else + return mpt3sas_scsih_expander_find_by_sas_address(ioc, + sas_address); +} + +/** + * _transport_convert_phy_link_rate - + * @link_rate: link rate returned from mpt firmware + * + * Convert link_rate from mpi fusion into sas_transport form. + */ +static enum sas_linkrate +_transport_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch (link_rate) { + case MPI2_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI25_SAS_NEG_LINK_RATE_12_0: + rc = SAS_LINK_RATE_12_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + + default: + case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * _transport_set_identify - set identify for phys and end devices + * @ioc: per adapter object + * @handle: device handle + * @identify: sas identify info + * + * Populates sas identify info. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle, + struct sas_identify *identify) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 device_info; + u32 ioc_status; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT + "handle(0x%04x), ioc_status(0x%04x)\nfailure at %s:%d/%s()!\n", + ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -EIO; + } + + memset(identify, 0, sizeof(struct sas_identify)); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + /* sas_address */ + identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + /* phy number of the parent device this device is linked to */ + identify->phy_identifier = sas_device_pg0.PhyNum; + + /* device_type */ + switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { + case MPI2_SAS_DEVICE_INFO_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI2_SAS_DEVICE_INFO_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: + identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) + identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; + + /* target_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + identify->target_port_protocols |= SAS_PROTOCOL_SATA; + + return 0; +} + +/** + * mpt3sas_transport_done - internal transport layer callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated transport cmds. + * The callback index passed is `ioc->transport_cb_idx` + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->transport_cmds.smid != smid) + return 1; + ioc->transport_cmds.status |= MPT3_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->transport_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID; + } + ioc->transport_cmds.status &= ~MPT3_CMD_PENDING; + complete(&ioc->transport_cmds.done); + return 1; +} + +/* report manufacture request structure */ +struct rep_manu_request { + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * transport_expander_report_manufacture - obtain SMP report_manufacture + * @ioc: per adapter object + * @sas_address: expander sas address + * @edev: the sas_expander_device object + * + * Fills in the sas_expander_device object when SMP port is created. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, struct sas_expander_device *edev) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + dma_addr_t data_in_dma; + size_t data_in_sz; + size_t data_out_sz; + u16 wait_state_count; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + data_out_sz = sizeof(struct rep_manu_request); + data_in_sz = sizeof(struct rep_manu_reply); + data_out = pci_alloc_consistent(ioc->pdev, data_out_sz + data_in_sz, + &data_out_dma); + + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + data_in_dma = data_out_dma + sizeof(struct rep_manu_request); + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + mpi_request->SASAddress = cpu_to_le64(sas_address); + mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, + data_in_sz); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "report_manufacture - send to sas_addr(0x%016llx)\n", + ioc->name, (unsigned long long)sas_address)); + init_completion(&ioc->transport_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "report_manufacture - complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + u8 *tmp; + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "report_manufacture - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct rep_manu_reply)) + goto out; + + manufacture_reply = data_out + sizeof(struct rep_manu_request); + strncpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strncpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strncpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format & 1; + if (edev->level) { + strncpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + } else + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "report_manufacture - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, data_out_sz + data_in_sz, + data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + + +/** + * _transport_delete_port - helper function to removing a port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + * + * Returns nothing. + */ +static void +_transport_delete_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_port *mpt3sas_port) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + enum sas_device_type device_type = + mpt3sas_port->remote_identify.device_type; + + dev_printk(KERN_INFO, &mpt3sas_port->port->dev, + "remove: sas_addr(0x%016llx)\n", + (unsigned long long) sas_address); + + ioc->logging_level |= MPT_DEBUG_TRANSPORT; + if (device_type == SAS_END_DEVICE) + mpt3sas_device_remove_by_sas_address(ioc, sas_address); + else if (device_type == SAS_EDGE_EXPANDER_DEVICE || + device_type == SAS_FANOUT_EXPANDER_DEVICE) + mpt3sas_expander_remove(ioc, sas_address); + ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; +} + +/** + * _transport_delete_phy - helper function to removing single phy from port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + * @mpt3sas_phy: mpt3sas per phy object + * + * Returns nothing. + */ +static void +_transport_delete_phy(struct MPT3SAS_ADAPTER *ioc, + struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "remove: sas_addr(0x%016llx), phy(%d)\n", + (unsigned long long) sas_address, mpt3sas_phy->phy_id); + + list_del(&mpt3sas_phy->port_siblings); + mpt3sas_port->num_phys--; + sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 0; +} + +/** + * _transport_add_phy - helper function to adding single phy to port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + * @mpt3sas_phy: mpt3sas per phy object + * + * Returns nothing. + */ +static void +_transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, + struct _sas_phy *mpt3sas_phy) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) + sas_address, mpt3sas_phy->phy_id); + + list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list); + mpt3sas_port->num_phys++; + sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 1; +} + +/** + * _transport_add_phy_to_an_existing_port - adding new phy to existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt3sas_phy: mpt3sas per phy object + * @sas_address: sas address of device/expander were phy needs to be added to + * + * Returns nothing. + */ +static void +_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, + u64 sas_address) +{ + struct _sas_port *mpt3sas_port; + struct _sas_phy *phy_srch; + + if (mpt3sas_phy->phy_belongs_to_port == 1) + return; + + list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, + port_list) { + if (mpt3sas_port->remote_identify.sas_address != + sas_address) + continue; + list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, + port_siblings) { + if (phy_srch == mpt3sas_phy) + return; + } + _transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy); + return; + } + +} + +/** + * _transport_del_phy_from_an_existing_port - delete phy from existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt3sas_phy: mpt3sas per phy object + * + * Returns nothing. + */ +static void +_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) +{ + struct _sas_port *mpt3sas_port, *next; + struct _sas_phy *phy_srch; + + if (mpt3sas_phy->phy_belongs_to_port == 0) + return; + + list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, + port_list) { + list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, + port_siblings) { + if (phy_srch != mpt3sas_phy) + continue; + + if (mpt3sas_port->num_phys == 1) + _transport_delete_port(ioc, mpt3sas_port); + else + _transport_delete_phy(ioc, mpt3sas_port, + mpt3sas_phy); + return; + } + } +} + +/** + * _transport_sanity_check - sanity check when adding a new port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @sas_address: sas address of device being added + * + * See the explanation above from _transport_delete_duplicate_port + */ +static void +_transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, + u64 sas_address) +{ + int i; + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != sas_address) + continue; + if (sas_node->phy[i].phy_belongs_to_port == 1) + _transport_del_phy_from_an_existing_port(ioc, sas_node, + &sas_node->phy[i]); + } +} + +/** + * mpt3sas_transport_port_add - insert port to the list + * @ioc: per adapter object + * @handle: handle of attached device + * @sas_address: sas address of parent expander or sas host + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new port object to the sas_node->sas_port_list. + * + * Returns mpt3sas_port. + */ +struct _sas_port * +mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u64 sas_address) +{ + struct _sas_phy *mpt3sas_phy, *next; + struct _sas_port *mpt3sas_port; + unsigned long flags; + struct _sas_node *sas_node; + struct sas_rphy *rphy; + int i; + struct sas_port *port; + + mpt3sas_port = kzalloc(sizeof(struct _sas_port), + GFP_KERNEL); + if (!mpt3sas_port) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return NULL; + } + + INIT_LIST_HEAD(&mpt3sas_port->port_list); + INIT_LIST_HEAD(&mpt3sas_port->phy_list); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_node) { + pr_err(MPT3SAS_FMT + "%s: Could not find parent sas_address(0x%016llx)!\n", + ioc->name, __func__, (unsigned long long)sas_address); + goto out_fail; + } + + if ((_transport_set_identify(ioc, handle, + &mpt3sas_port->remote_identify))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + _transport_sanity_check(ioc, sas_node, + mpt3sas_port->remote_identify.sas_address); + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != + mpt3sas_port->remote_identify.sas_address) + continue; + list_add_tail(&sas_node->phy[i].port_siblings, + &mpt3sas_port->phy_list); + mpt3sas_port->num_phys++; + } + + if (!mpt3sas_port->num_phys) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + port = sas_port_alloc_num(sas_node->parent_dev); + if ((sas_port_add(port))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list, + port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &port->dev, + "add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n", + handle, (unsigned long long) + mpt3sas_port->remote_identify.sas_address, + mpt3sas_phy->phy_id); + sas_port_add_phy(port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 1; + } + + mpt3sas_port->port = port; + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) + rphy = sas_end_device_alloc(port); + else + rphy = sas_expander_alloc(port, + mpt3sas_port->remote_identify.device_type); + + rphy->identify = mpt3sas_port->remote_identify; + if ((sas_rphy_add(rphy))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &rphy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n", + handle, (unsigned long long) + mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->rphy = rphy; + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* fill in report manufacture */ + if (mpt3sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt3sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) + _transport_expander_report_manufacture(ioc, + mpt3sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy)); + return mpt3sas_port; + + out_fail: + list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, + port_siblings) + list_del(&mpt3sas_phy->port_siblings); + kfree(mpt3sas_port); + return NULL; +} + +/** + * mpt3sas_transport_port_remove - remove port from the list + * @ioc: per adapter object + * @sas_address: sas address of attached device + * @sas_address_parent: sas address of parent expander or sas host + * Context: This function will acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_port_list. + * + * Return nothing. + */ +void +mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u64 sas_address_parent) +{ + int i; + unsigned long flags; + struct _sas_port *mpt3sas_port, *next; + struct _sas_node *sas_node; + u8 found = 0; + struct _sas_phy *mpt3sas_phy, *next_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address_parent); + if (!sas_node) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, + port_list) { + if (mpt3sas_port->remote_identify.sas_address != sas_address) + continue; + found = 1; + list_del(&mpt3sas_port->port_list); + goto out; + } + out: + if (!found) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address == sas_address) + memset(&sas_node->phy[i].remote_identify, 0 , + sizeof(struct sas_identify)); + } + + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + list_for_each_entry_safe(mpt3sas_phy, next_phy, + &mpt3sas_port->phy_list, port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt3sas_port->port->dev, + "remove: sas_addr(0x%016llx), phy(%d)\n", + (unsigned long long) + mpt3sas_port->remote_identify.sas_address, + mpt3sas_phy->phy_id); + mpt3sas_phy->phy_belongs_to_port = 0; + sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); + list_del(&mpt3sas_phy->port_siblings); + } + sas_port_delete(mpt3sas_port->port); + kfree(mpt3sas_port); +} + +/** + * mpt3sas_transport_add_host_phy - report sas_host phy to transport + * @ioc: per adapter object + * @mpt3sas_phy: mpt3sas per phy object + * @phy_pg0: sas phy page 0 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy + *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt3sas_phy->phy_id; + + + INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt3sas_phy->handle, + &mpt3sas_phy->identify))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mpt3sas_phy->identify; + mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); + if (mpt3sas_phy->attached_handle) + _transport_set_identify(ioc, mpt3sas_phy->attached_handle, + &mpt3sas_phy->remote_identify); + phy->identify.phy_identifier = mpt3sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt3sas_phy->handle, (unsigned long long) + mpt3sas_phy->identify.sas_address, + mpt3sas_phy->attached_handle, + (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); + mpt3sas_phy->phy = phy; + return 0; +} + + +/** + * mpt3sas_transport_add_expander_phy - report expander phy to transport + * @ioc: per adapter object + * @mpt3sas_phy: mpt3sas per phy object + * @expander_pg1: expander page 1 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy + *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, + struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt3sas_phy->phy_id; + + INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt3sas_phy->handle, + &mpt3sas_phy->identify))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mpt3sas_phy->identify; + mpt3sas_phy->attached_handle = + le16_to_cpu(expander_pg1.AttachedDevHandle); + if (mpt3sas_phy->attached_handle) + _transport_set_identify(ioc, mpt3sas_phy->attached_handle, + &mpt3sas_phy->remote_identify); + phy->identify.phy_identifier = mpt3sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + expander_pg1.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt3sas_phy->handle, (unsigned long long) + mpt3sas_phy->identify.sas_address, + mpt3sas_phy->attached_handle, + (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); + mpt3sas_phy->phy = phy; + return 0; +} + +/** + * mpt3sas_transport_update_links - refreshing phy link changes + * @ioc: per adapter object + * @sas_address: sas address of parent expander or sas host + * @handle: attached device handle + * @phy_numberv: phy number + * @link_rate: new link rate + * + * Returns nothing. + */ +void +mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate) +{ + unsigned long flags; + struct _sas_node *sas_node; + struct _sas_phy *mpt3sas_phy; + + if (ioc->shost_recovery || ioc->pci_error_recovery) + return; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); + if (!sas_node) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + + mpt3sas_phy = &sas_node->phy[phy_number]; + mpt3sas_phy->attached_handle = handle; + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { + _transport_set_identify(ioc, handle, + &mpt3sas_phy->remote_identify); + _transport_add_phy_to_an_existing_port(ioc, sas_node, + mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address); + } else + memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct + sas_identify)); + + if (mpt3sas_phy->phy) + mpt3sas_phy->phy->negotiated_linkrate = + _transport_convert_phy_link_rate(link_rate); + + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "refresh: parent sas_addr(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + (unsigned long long)sas_address, + link_rate, phy_number, handle, (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); +} + +static inline void * +phy_to_ioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return shost_priv(shost); +} + +static inline void * +rphy_to_ioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + return shost_priv(shost); +} + +/* report phy error log structure */ +struct phy_error_log_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x11 */ + u8 allocated_response_length; + u8 request_length; /* 02 */ + u8 reserved_1[5]; + u8 phy_identifier; + u8 reserved_2[2]; +}; + +/* report phy error log reply structure */ +struct phy_error_log_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; + __be16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 reserved_2[2]; + __be32 invalid_dword; + __be32 running_disparity_error; + __be32 loss_of_dword_sync; + __be32 phy_reset_problem; +}; + +/** + * _transport_get_expander_phy_error_log - return expander counters + * @ioc: per adapter object + * @phy: The sas phy object + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, + struct sas_phy *phy) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct phy_error_log_request *phy_error_log_request; + struct phy_error_log_reply *phy_error_log_reply; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + u16 wait_state_count; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct phy_error_log_request) + + sizeof(struct phy_error_log_reply); + data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + rc = -EINVAL; + memset(data_out, 0, sz); + phy_error_log_request = data_out; + phy_error_log_request->smp_frame_type = 0x40; + phy_error_log_request->function = 0x11; + phy_error_log_request->request_length = 2; + phy_error_log_request->allocated_response_length = 0; + phy_error_log_request->phy_identifier = phy->number; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); + mpi_request->RequestDataLength = + cpu_to_le16(sizeof(struct phy_error_log_request)); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, data_out_dma, + sizeof(struct phy_error_log_request), + data_out_dma + sizeof(struct phy_error_log_request), + sizeof(struct phy_error_log_reply)); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n", + ioc->name, (unsigned long long)phy->identify.sas_address, + phy->number)); + init_completion(&ioc->transport_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_error_log - complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_error_log - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct phy_error_log_reply)) + goto out; + + phy_error_log_reply = data_out + + sizeof(struct phy_error_log_request); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_error_log - function_result(%d)\n", + ioc->name, phy_error_log_reply->function_result)); + + phy->invalid_dword_count = + be32_to_cpu(phy_error_log_reply->invalid_dword); + phy->running_disparity_error_count = + be32_to_cpu(phy_error_log_reply->running_disparity_error); + phy->loss_of_dword_sync_count = + be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); + phy->phy_reset_problem_count = + be32_to_cpu(phy_error_log_reply->phy_reset_problem); + rc = 0; + } else + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_error_log - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * _transport_get_linkerrors - return phy counters for both hba and expanders + * @phy: The sas phy object + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_transport_get_linkerrors(struct sas_phy *phy) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + unsigned long flags; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasPhyPage1_t phy_pg1; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_get_expander_phy_error_log(ioc, phy); + + /* get hba phy error logs */ + if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, + phy->number))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + pr_info(MPT3SAS_FMT + "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n", + ioc->name, phy->number, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.PhyResetProblemCount); + return 0; +} + +/** + * _transport_get_enclosure_identifier - + * @phy: The sas phy object + * + * Obtain the enclosure logical id for an expander. + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + int rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device) { + *identifier = sas_device->enclosure_logical_id; + rc = 0; + } else { + *identifier = 0; + rc = -ENXIO; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/** + * _transport_get_bay_identifier - + * @phy: The sas phy object + * + * Returns the slot id for a device that resides inside an enclosure. + */ +static int +_transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + int rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device) + rc = sas_device->slot; + else + rc = -ENXIO; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/* phy control request structure */ +struct phy_control_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x91 */ + u8 allocated_response_length; + u8 request_length; /* 0x09 */ + u16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 phy_operation; + u8 reserved_2[13]; + u64 attached_device_name; + u8 programmed_min_physical_link_rate; + u8 programmed_max_physical_link_rate; + u8 reserved_3[6]; +}; + +/* phy control reply structure */ +struct phy_control_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; +}; + +#define SMP_PHY_CONTROL_LINK_RESET (0x01) +#define SMP_PHY_CONTROL_HARD_RESET (0x02) +#define SMP_PHY_CONTROL_DISABLE (0x03) + +/** + * _transport_expander_phy_control - expander phy control + * @ioc: per adapter object + * @phy: The sas phy object + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, + struct sas_phy *phy, u8 phy_operation) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct phy_control_request *phy_control_request; + struct phy_control_reply *phy_control_reply; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + u16 wait_state_count; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct phy_control_request) + + sizeof(struct phy_control_reply); + data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + rc = -EINVAL; + memset(data_out, 0, sz); + phy_control_request = data_out; + phy_control_request->smp_frame_type = 0x40; + phy_control_request->function = 0x91; + phy_control_request->request_length = 9; + phy_control_request->allocated_response_length = 0; + phy_control_request->phy_identifier = phy->number; + phy_control_request->phy_operation = phy_operation; + phy_control_request->programmed_min_physical_link_rate = + phy->minimum_linkrate << 4; + phy_control_request->programmed_max_physical_link_rate = + phy->maximum_linkrate << 4; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); + mpi_request->RequestDataLength = + cpu_to_le16(sizeof(struct phy_error_log_request)); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct phy_control_request), data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct phy_control_reply), data_out_dma + + sizeof(struct phy_control_request)); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", + ioc->name, (unsigned long long)phy->identify.sas_address, + phy->number, phy_operation)); + init_completion(&ioc->transport_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_control - complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_control - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct phy_control_reply)) + goto out; + + phy_control_reply = data_out + + sizeof(struct phy_control_request); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_control - function_result(%d)\n", + ioc->name, phy_control_reply->function_result)); + + rc = 0; + } else + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "phy_control - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * _transport_phy_reset - + * @phy: The sas phy object + * @hard_reset: + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_expander_phy_control(ioc, phy, + (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : + SMP_PHY_CONTROL_LINK_RESET); + + /* handle hba phys */ + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = hard_reset ? + MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; + mpi_request.PhyNum = phy->number; + + if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + pr_info(MPT3SAS_FMT + "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, phy->number, le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + return 0; +} + +/** + * _transport_phy_enable - enable/disable phys + * @phy: The sas phy object + * @enable: enable phy when true + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_phy_enable(struct sas_phy *phy, int enable) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int rc = 0; + unsigned long flags; + int i, discovery_active; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_expander_phy_control(ioc, phy, + (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : + SMP_PHY_CONTROL_DISABLE); + + /* handle hba phys */ + + /* read sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + /* unable to enable/disable phys when when discovery is active */ + for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) { + if (sas_iounit_pg0->PhyData[i].PortFlags & + MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { + pr_err(MPT3SAS_FMT "discovery is active on " \ + "port = %d, phy = %d: unable to enable/disable " + "phys, try again later!\n", ioc->name, + sas_iounit_pg0->PhyData[i].Port, i); + discovery_active = 1; + } + } + + if (discovery_active) { + rc = -EAGAIN; + goto out; + } + + /* read sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + /* copy Port/PortFlags/PhyFlags from page 0 */ + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + sas_iounit_pg1->PhyData[i].Port = + sas_iounit_pg0->PhyData[i].Port; + sas_iounit_pg1->PhyData[i].PortFlags = + (sas_iounit_pg0->PhyData[i].PortFlags & + MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG); + sas_iounit_pg1->PhyData[i].PhyFlags = + (sas_iounit_pg0->PhyData[i].PhyFlags & + (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED + + MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED)); + } + + if (enable) + sas_iounit_pg1->PhyData[phy->number].PhyFlags + &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + else + sas_iounit_pg1->PhyData[phy->number].PhyFlags + |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + + mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); + + /* link reset */ + if (enable) + _transport_phy_reset(phy, 0); + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); + return rc; +} + +/** + * _transport_phy_speed - set phy min/max link rates + * @phy: The sas phy object + * @rates: rates defined in sas_phy_linkrates + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int i; + int rc = 0; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!rates->minimum_linkrate) + rates->minimum_linkrate = phy->minimum_linkrate; + else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) + rates->minimum_linkrate = phy->minimum_linkrate_hw; + + if (!rates->maximum_linkrate) + rates->maximum_linkrate = phy->maximum_linkrate; + else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) + rates->maximum_linkrate = phy->maximum_linkrate_hw; + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) { + phy->minimum_linkrate = rates->minimum_linkrate; + phy->maximum_linkrate = rates->maximum_linkrate; + return _transport_expander_phy_control(ioc, phy, + SMP_PHY_CONTROL_LINK_RESET); + } + + /* handle hba phys */ + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + for (i = 0; i < ioc->sas_hba.num_phys; i++) { + if (phy->number != i) { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (ioc->sas_hba.phy[i].phy->minimum_linkrate + + (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); + } else { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (rates->minimum_linkrate + + (rates->maximum_linkrate << 4)); + } + } + + if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, + sz)) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* link reset */ + _transport_phy_reset(phy, 0); + + /* read phy page 0, then update the rates in the sas transport phy */ + if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + phy->number)) { + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + } + + out: + kfree(sas_iounit_pg1); + return rc; +} + +/** + * _transport_smp_handler - transport portal for smp passthru + * @shost: shost object + * @rphy: sas transport rphy object + * @req: + * + * This used primarily for smp_utils. + * Example: + * smp_rep_general /sys/class/bsg/expander-5:0 + */ +static int +_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, + struct request *req) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + int rc, i; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u8 issue_reset = 0; + dma_addr_t dma_addr_in = 0; + dma_addr_t dma_addr_out = 0; + dma_addr_t pci_dma_in = 0; + dma_addr_t pci_dma_out = 0; + void *pci_addr_in = NULL; + void *pci_addr_out = NULL; + u16 wait_state_count; + struct request *rsp = req->next_rq; + struct bio_vec *bvec = NULL; + + if (!rsp) { + pr_err(MPT3SAS_FMT "%s: the smp response space is missing\n", + ioc->name, __func__); + return -EINVAL; + } + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + + rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); + if (rc) + return rc; + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", ioc->name, + __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + /* Check if the request is split across multiple segments */ + if (req->bio->bi_vcnt > 1) { + u32 offset = 0; + + /* Allocate memory and copy the request */ + pci_addr_out = pci_alloc_consistent(ioc->pdev, + blk_rq_bytes(req), &pci_dma_out); + if (!pci_addr_out) { + pr_info(MPT3SAS_FMT "%s(): PCI Addr out = NULL\n", + ioc->name, __func__); + rc = -ENOMEM; + goto out; + } + + bio_for_each_segment(bvec, req->bio, i) { + memcpy(pci_addr_out + offset, + page_address(bvec->bv_page) + bvec->bv_offset, + bvec->bv_len); + offset += bvec->bv_len; + } + } else { + dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_out) { + pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n", + ioc->name, __func__); + rc = -ENOMEM; + goto free_pci; + } + } + + /* Check if the response needs to be populated across + * multiple segments */ + if (rsp->bio->bi_vcnt > 1) { + pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp), + &pci_dma_in); + if (!pci_addr_in) { + pr_info(MPT3SAS_FMT "%s(): PCI Addr in = NULL\n", + ioc->name, __func__); + rc = -ENOMEM; + goto unmap; + } + } else { + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_in) { + pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n", + ioc->name, __func__); + rc = -ENOMEM; + goto unmap; + } + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto unmap; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + if (wait_state_count) + pr_info(MPT3SAS_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto unmap; + } + + rc = 0; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + mpi_request->SASAddress = (rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(ioc->sas_hba.sas_address); + mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); + psge = &mpi_request->SGL; + + if (req->bio->bi_vcnt > 1) + ioc->build_sg(ioc, psge, pci_dma_out, (blk_rq_bytes(req) - 4), + pci_dma_in, (blk_rq_bytes(rsp) + 4)); + else + ioc->build_sg(ioc, psge, dma_addr_out, (blk_rq_bytes(req) - 4), + dma_addr_in, (blk_rq_bytes(rsp) + 4)); + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "%s - sending smp request\n", ioc->name, __func__)); + + init_completion(&ioc->transport_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s : timeout\n", + __func__, ioc->name); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "%s - complete\n", ioc->name, __func__)); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "%s - reply data transfer size(%d)\n", + ioc->name, __func__, + le16_to_cpu(mpi_reply->ResponseDataLength))); + + memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); + req->sense_len = sizeof(*mpi_reply); + req->resid_len = 0; + rsp->resid_len -= + le16_to_cpu(mpi_reply->ResponseDataLength); + + /* check if the resp needs to be copied from the allocated + * pci mem */ + if (rsp->bio->bi_vcnt > 1) { + u32 offset = 0; + u32 bytes_to_copy = + le16_to_cpu(mpi_reply->ResponseDataLength); + bio_for_each_segment(bvec, rsp->bio, i) { + if (bytes_to_copy <= bvec->bv_len) { + memcpy(page_address(bvec->bv_page) + + bvec->bv_offset, pci_addr_in + + offset, bytes_to_copy); + break; + } else { + memcpy(page_address(bvec->bv_page) + + bvec->bv_offset, pci_addr_in + + offset, bvec->bv_len); + bytes_to_copy -= bvec->bv_len; + } + offset += bvec->bv_len; + } + } + } else { + dtransportprintk(ioc, pr_info(MPT3SAS_FMT + "%s - no reply\n", ioc->name, __func__)); + rc = -ENXIO; + } + + issue_host_reset: + if (issue_reset) { + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = -ETIMEDOUT; + } + + unmap: + if (dma_addr_out) + pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req), + PCI_DMA_BIDIRECTIONAL); + if (dma_addr_in) + pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp), + PCI_DMA_BIDIRECTIONAL); + + free_pci: + if (pci_addr_out) + pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out, + pci_dma_out); + + if (pci_addr_in) + pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in, + pci_dma_in); + + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +struct sas_function_template mpt3sas_transport_functions = { + .get_linkerrors = _transport_get_linkerrors, + .get_enclosure_identifier = _transport_get_enclosure_identifier, + .get_bay_identifier = _transport_get_bay_identifier, + .phy_reset = _transport_phy_reset, + .phy_enable = _transport_phy_enable, + .set_phy_speed = _transport_phy_speed, + .smp_handler = _transport_smp_handler, +}; + +struct scsi_transport_template *mpt3sas_transport_template; diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c new file mode 100644 index 0000000..da6c5f2 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c @@ -0,0 +1,434 @@ +/* + * This module provides common API to set Diagnostic trigger for MPT + * (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/compat.h> +#include <linux/poll.h> + +#include <linux/io.h> +#include <linux/uaccess.h> + +#include "mpt3sas_base.h" + +/** + * _mpt3sas_raise_sigio - notifiy app + * @ioc: per adapter object + * @event_data: + */ +static void +_mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data) +{ + Mpi2EventNotificationReply_t *mpi_reply; + u16 sz, event_data_sz; + unsigned long flags; + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", + ioc->name, __func__)); + + sz = offsetof(Mpi2EventNotificationReply_t, EventData) + + sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4; + mpi_reply = kzalloc(sz, GFP_KERNEL); + if (!mpi_reply) + goto out; + mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED); + event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4; + mpi_reply->EventDataLength = cpu_to_le16(event_data_sz); + memcpy(&mpi_reply->EventData, event_data, + sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: add to driver event log\n", + ioc->name, __func__)); + mpt3sas_ctl_add_to_event_log(ioc, mpi_reply); + kfree(mpi_reply); + out: + + /* clearing the diag_trigger_active flag */ + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: clearing diag_trigger_active flag\n", + ioc->name, __func__)); + ioc->diag_trigger_active = 0; + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} + +/** + * mpt3sas_process_trigger_data - process the event data for the trigger + * @ioc: per adapter object + * @event_data: + */ +void +mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data) +{ + u8 issue_reset = 0; + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", + ioc->name, __func__)); + + /* release the diag buffer trace */ + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) == 0) { + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: release trace diag buffer\n", ioc->name, __func__)); + mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, + &issue_reset); + } + + _mpt3sas_raise_sigio(ioc, event_data); + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} + +/** + * mpt3sas_trigger_master - Master trigger handler + * @ioc: per adapter object + * @trigger_bitmask: + * + */ +void +mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask) +{ + struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; + unsigned long flags; + u8 found_match = 0; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + + if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT || + trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) + goto by_pass_checks; + + /* check to see if trace buffers are currently registered */ + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + /* check to see if trace buffers are currently released */ + if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + by_pass_checks: + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: enter - trigger_bitmask = 0x%08x\n", + ioc->name, __func__, trigger_bitmask)); + + /* don't send trigger if an trigger is currently active */ + if (ioc->diag_trigger_active) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + goto out; + } + + /* check for the trigger condition */ + if (ioc->diag_trigger_master.MasterData & trigger_bitmask) { + found_match = 1; + ioc->diag_trigger_active = 1; + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: setting diag_trigger_active flag\n", + ioc->name, __func__)); + } + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + + if (!found_match) + goto out; + + memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); + event_data.trigger_type = MPT3SAS_TRIGGER_MASTER; + event_data.u.master.MasterData = trigger_bitmask; + + if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT || + trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) + _mpt3sas_raise_sigio(ioc, &event_data); + else + mpt3sas_send_trigger_data_event(ioc, &event_data); + + out: + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} + +/** + * mpt3sas_trigger_event - Event trigger handler + * @ioc: per adapter object + * @event: + * @log_entry_qualifier: + * + */ +void +mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event, + u16 log_entry_qualifier) +{ + struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; + struct SL_WH_EVENT_TRIGGER_T *event_trigger; + int i; + unsigned long flags; + u8 found_match; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + + /* check to see if trace buffers are currently registered */ + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + /* check to see if trace buffers are currently released */ + if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n", + ioc->name, __func__, event, log_entry_qualifier)); + + /* don't send trigger if an trigger is currently active */ + if (ioc->diag_trigger_active) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + goto out; + } + + /* check for the trigger condition */ + event_trigger = ioc->diag_trigger_event.EventTriggerEntry; + for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries + && !found_match; i++, event_trigger++) { + if (event_trigger->EventValue != event) + continue; + if (event == MPI2_EVENT_LOG_ENTRY_ADDED) { + if (event_trigger->LogEntryQualifier == + log_entry_qualifier) + found_match = 1; + continue; + } + found_match = 1; + ioc->diag_trigger_active = 1; + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: setting diag_trigger_active flag\n", + ioc->name, __func__)); + } + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + + if (!found_match) + goto out; + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: setting diag_trigger_active flag\n", + ioc->name, __func__)); + memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); + event_data.trigger_type = MPT3SAS_TRIGGER_EVENT; + event_data.u.event.EventValue = event; + event_data.u.event.LogEntryQualifier = log_entry_qualifier; + mpt3sas_send_trigger_data_event(ioc, &event_data); + out: + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} + +/** + * mpt3sas_trigger_scsi - SCSI trigger handler + * @ioc: per adapter object + * @sense_key: + * @asc: + * @ascq: + * + */ +void +mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc, + u8 ascq) +{ + struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; + struct SL_WH_SCSI_TRIGGER_T *scsi_trigger; + int i; + unsigned long flags; + u8 found_match; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + + /* check to see if trace buffers are currently registered */ + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + /* check to see if trace buffers are currently released */ + if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n", + ioc->name, __func__, sense_key, asc, ascq)); + + /* don't send trigger if an trigger is currently active */ + if (ioc->diag_trigger_active) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + goto out; + } + + /* check for the trigger condition */ + scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry; + for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries + && !found_match; i++, scsi_trigger++) { + if (scsi_trigger->SenseKey != sense_key) + continue; + if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc)) + continue; + if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq)) + continue; + found_match = 1; + ioc->diag_trigger_active = 1; + } + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + + if (!found_match) + goto out; + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: setting diag_trigger_active flag\n", + ioc->name, __func__)); + memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); + event_data.trigger_type = MPT3SAS_TRIGGER_SCSI; + event_data.u.scsi.SenseKey = sense_key; + event_data.u.scsi.ASC = asc; + event_data.u.scsi.ASCQ = ascq; + mpt3sas_send_trigger_data_event(ioc, &event_data); + out: + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} + +/** + * mpt3sas_trigger_mpi - MPI trigger handler + * @ioc: per adapter object + * @ioc_status: + * @loginfo: + * + */ +void +mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo) +{ + struct SL_WH_TRIGGERS_EVENT_DATA_T event_data; + struct SL_WH_MPI_TRIGGER_T *mpi_trigger; + int i; + unsigned long flags; + u8 found_match; + + spin_lock_irqsave(&ioc->diag_trigger_lock, flags); + + /* check to see if trace buffers are currently registered */ + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + /* check to see if trace buffers are currently released */ + if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + return; + } + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n", + ioc->name, __func__, ioc_status, loginfo)); + + /* don't send trigger if an trigger is currently active */ + if (ioc->diag_trigger_active) { + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + goto out; + } + + /* check for the trigger condition */ + mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry; + for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries + && !found_match; i++, mpi_trigger++) { + if (mpi_trigger->IOCStatus != ioc_status) + continue; + if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF || + mpi_trigger->IocLogInfo == loginfo)) + continue; + found_match = 1; + ioc->diag_trigger_active = 1; + } + spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags); + + if (!found_match) + goto out; + + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT + "%s: setting diag_trigger_active flag\n", + ioc->name, __func__)); + memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T)); + event_data.trigger_type = MPT3SAS_TRIGGER_MPI; + event_data.u.mpi.IOCStatus = ioc_status; + event_data.u.mpi.IocLogInfo = loginfo; + mpt3sas_send_trigger_data_event(ioc, &event_data); + out: + dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); +} diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h new file mode 100644 index 0000000..a10c309 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h @@ -0,0 +1,193 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * to set Diagnostic triggers for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + /* Diagnostic Trigger Configuration Data Structures */ + +#ifndef MPT3SAS_TRIGGER_DIAG_H_INCLUDED +#define MPT3SAS_TRIGGER_DIAG_H_INCLUDED + +/* limitation on number of entries */ +#define NUM_VALID_ENTRIES (20) + +/* trigger types */ +#define MPT3SAS_TRIGGER_MASTER (1) +#define MPT3SAS_TRIGGER_EVENT (2) +#define MPT3SAS_TRIGGER_SCSI (3) +#define MPT3SAS_TRIGGER_MPI (4) + +/* trigger names */ +#define MASTER_TRIGGER_FILE_NAME "diag_trigger_master" +#define EVENT_TRIGGERS_FILE_NAME "diag_trigger_event" +#define SCSI_TRIGGERS_FILE_NAME "diag_trigger_scsi" +#define MPI_TRIGGER_FILE_NAME "diag_trigger_mpi" + +/* master trigger bitmask */ +#define MASTER_TRIGGER_FW_FAULT (0x00000001) +#define MASTER_TRIGGER_ADAPTER_RESET (0x00000002) +#define MASTER_TRIGGER_TASK_MANAGMENT (0x00000004) +#define MASTER_TRIGGER_DEVICE_REMOVAL (0x00000008) + +/* fake firmware event for tigger */ +#define MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED (0x6E) + +/** + * MasterTrigger is a single U32 passed to/from sysfs. + * + * Bit Flags (enables) include: + * 1. FW Faults + * 2. Adapter Reset issued by driver + * 3. TMs + * 4. Device Remove Event sent by FW + */ + +struct SL_WH_MASTER_TRIGGER_T { + uint32_t MasterData; +}; + +/** + * struct SL_WH_EVENT_TRIGGER_T - Definition of an event trigger element + * @EventValue: Event Code to trigger on + * @LogEntryQualifier: Type of FW event that logged (Log Entry Added Event only) + * + * Defines an event that should induce a DIAG_TRIGGER driver event if observed. + */ +struct SL_WH_EVENT_TRIGGER_T { + uint16_t EventValue; + uint16_t LogEntryQualifier; +}; + +/** + * struct SL_WH_EVENT_TRIGGERS_T - Structure passed to/from sysfs containing a + * list of Event Triggers to be monitored for. + * @ValidEntries: Number of _SL_WH_EVENT_TRIGGER_T structures contained in this + * structure. + * @EventTriggerEntry: List of Event trigger elements. + * + * This binary structure is transferred via sysfs to get/set Event Triggers + * in the Linux Driver. + */ + +struct SL_WH_EVENT_TRIGGERS_T { + uint32_t ValidEntries; + struct SL_WH_EVENT_TRIGGER_T EventTriggerEntry[NUM_VALID_ENTRIES]; +}; + +/** + * struct SL_WH_SCSI_TRIGGER_T - Definition of a SCSI trigger element + * @ASCQ: Additional Sense Code Qualifier. Can be specific or 0xFF for + * wildcard. + * @ASC: Additional Sense Code. Can be specific or 0xFF for wildcard + * @SenseKey: SCSI Sense Key + * + * Defines a sense key (single or many variants) that should induce a + * DIAG_TRIGGER driver event if observed. + */ +struct SL_WH_SCSI_TRIGGER_T { + U8 ASCQ; + U8 ASC; + U8 SenseKey; + U8 Reserved; +}; + +/** + * struct SL_WH_SCSI_TRIGGERS_T - Structure passed to/from sysfs containing a + * list of SCSI sense codes that should trigger a DIAG_SERVICE event when + * observed. + * @ValidEntries: Number of _SL_WH_SCSI_TRIGGER_T structures contained in this + * structure. + * @SCSITriggerEntry: List of SCSI Sense Code trigger elements. + * + * This binary structure is transferred via sysfs to get/set SCSI Sense Code + * Triggers in the Linux Driver. + */ +struct SL_WH_SCSI_TRIGGERS_T { + uint32_t ValidEntries; + struct SL_WH_SCSI_TRIGGER_T SCSITriggerEntry[NUM_VALID_ENTRIES]; +}; + +/** + * struct SL_WH_MPI_TRIGGER_T - Definition of an MPI trigger element + * @IOCStatus: MPI IOCStatus + * @IocLogInfo: MPI IocLogInfo. Can be specific or 0xFFFFFFFF for wildcard + * + * Defines a MPI IOCStatus/IocLogInfo pair that should induce a DIAG_TRIGGER + * driver event if observed. + */ +struct SL_WH_MPI_TRIGGER_T { + uint16_t IOCStatus; + uint16_t Reserved; + uint32_t IocLogInfo; +}; + +/** + * struct SL_WH_MPI_TRIGGERS_T - Structure passed to/from sysfs containing a + * list of MPI IOCStatus/IocLogInfo pairs that should trigger a DIAG_SERVICE + * event when observed. + * @ValidEntries: Number of _SL_WH_MPI_TRIGGER_T structures contained in this + * structure. + * @MPITriggerEntry: List of MPI IOCStatus/IocLogInfo trigger elements. + * + * This binary structure is transferred via sysfs to get/set MPI Error Triggers + * in the Linux Driver. + */ +struct SL_WH_MPI_TRIGGERS_T { + uint32_t ValidEntries; + struct SL_WH_MPI_TRIGGER_T MPITriggerEntry[NUM_VALID_ENTRIES]; +}; + +/** + * struct SL_WH_TRIGGERS_EVENT_DATA_T - event data for trigger + * @trigger_type: trigger type (see MPT3SAS_TRIGGER_XXXX) + * @u: trigger condition that caused trigger to be sent + */ +struct SL_WH_TRIGGERS_EVENT_DATA_T { + uint32_t trigger_type; + union { + struct SL_WH_MASTER_TRIGGER_T master; + struct SL_WH_EVENT_TRIGGER_T event; + struct SL_WH_SCSI_TRIGGER_T scsi; + struct SL_WH_MPI_TRIGGER_T mpi; + } u; +}; +#endif /* MPT3SAS_TRIGGER_DIAG_H_INCLUDED */ diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h index 8f7eb4f..487aa6f 100644 --- a/drivers/scsi/mvsas/mv_94xx.h +++ b/drivers/scsi/mvsas/mv_94xx.h @@ -258,21 +258,11 @@ enum sas_sata_phy_regs { #define SPI_ADDR_VLD_94XX (1U << 1) #define SPI_CTRL_SpiStart_94XX (1U << 0) -#define mv_ffc(x) ffz(x) - static inline int mv_ffc64(u64 v) { - int i; - i = mv_ffc((u32)v); - if (i >= 0) - return i; - i = mv_ffc((u32)(v>>32)); - - if (i != 0) - return 32 + i; - - return -1; + u64 x = ~v; + return x ? __ffs64(x) : -1; } #define r_reg_set_enable(i) \ diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index c04a4f5..da24955 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -69,7 +69,7 @@ extern struct kmem_cache *mvs_task_list_cache; #define DEV_IS_EXPANDER(type) \ ((type == EDGE_DEV) || (type == FANOUT_DEV)) -#define bit(n) ((u32)1 << n) +#define bit(n) ((u64)1 << n) #define for_each_phy(__lseq_mask, __mc, __lseq) \ for ((__mc) = (__lseq_mask), (__lseq) = 0; \ diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index d4ed9eb..4375417 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -97,9 +97,37 @@ struct osd_dev_handle { static DEFINE_IDA(osd_minor_ida); +/* + * scsi sysfs attribute operations + */ +static ssize_t osdname_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct osd_uld_device *ould = container_of(dev, struct osd_uld_device, + class_dev); + return sprintf(buf, "%s\n", ould->odi.osdname); +} + +static ssize_t systemid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct osd_uld_device *ould = container_of(dev, struct osd_uld_device, + class_dev); + + memcpy(buf, ould->odi.systemid, ould->odi.systemid_len); + return ould->odi.systemid_len; +} + +static struct device_attribute osd_uld_attrs[] = { + __ATTR(osdname, S_IRUGO, osdname_show, NULL), + __ATTR(systemid, S_IRUGO, systemid_show, NULL), + __ATTR_NULL, +}; + static struct class osd_uld_class = { .owner = THIS_MODULE, .name = "scsi_osd", + .dev_attrs = osd_uld_attrs, }; /* diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 1c28215..83d7984 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1615,8 +1615,7 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). */ - if (fcport->loop_id != FC_NO_LOOP_ID && - !test_bit(UNLOADING, &fcport->vha->dpc_flags)) { + if (fcport->loop_id != FC_NO_LOOP_ID) { if (IS_FWI2_CAPABLE(fcport->vha->hw)) fcport->vha->hw->isp_ops->fabric_logout(fcport->vha, fcport->loop_id, fcport->d_id.b.domain, diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 2f9bddd..9f34ded 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -219,7 +219,8 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job) break; } exit_fcp_prio_cfg: - bsg_job->job_done(bsg_job); + if (!ret) + bsg_job->job_done(bsg_job); return ret; } @@ -741,9 +742,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if (qla81xx_get_port_config(vha, config)) { ql_log(ql_log_warn, vha, 0x701f, "Get port config failed.\n"); - bsg_job->reply->result = (DID_ERROR << 16); rval = -EPERM; - goto done_free_dma_req; + goto done_free_dma_rsp; } ql_dbg(ql_dbg_user, vha, 0x70c0, @@ -761,9 +761,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) new_config, elreq.options); if (rval) { - bsg_job->reply->result = (DID_ERROR << 16); rval = -EPERM; - goto done_free_dma_req; + goto done_free_dma_rsp; } type = "FC_BSG_HST_VENDOR_LOOPBACK"; @@ -795,9 +794,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) "MPI reset failed.\n"); } - bsg_job->reply->result = (DID_ERROR << 16); rval = -EIO; - goto done_free_dma_req; + goto done_free_dma_rsp; } } else { type = "FC_BSG_HST_VENDOR_LOOPBACK"; @@ -812,34 +810,27 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) ql_log(ql_log_warn, vha, 0x702c, "Vendor request %s failed.\n", type); - fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + - sizeof(struct fc_bsg_reply); - - memcpy(fw_sts_ptr, response, sizeof(response)); - fw_sts_ptr += sizeof(response); - *fw_sts_ptr = command_sent; rval = 0; bsg_job->reply->result = (DID_ERROR << 16); + bsg_job->reply->reply_payload_rcv_len = 0; } else { ql_dbg(ql_dbg_user, vha, 0x702d, "Vendor request %s completed.\n", type); - - bsg_job->reply_len = sizeof(struct fc_bsg_reply) + - sizeof(response) + sizeof(uint8_t); - bsg_job->reply->reply_payload_rcv_len = - bsg_job->reply_payload.payload_len; - fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + - sizeof(struct fc_bsg_reply); - memcpy(fw_sts_ptr, response, sizeof(response)); - fw_sts_ptr += sizeof(response); - *fw_sts_ptr = command_sent; - bsg_job->reply->result = DID_OK; + bsg_job->reply->result = (DID_OK << 16); sg_copy_from_buffer(bsg_job->reply_payload.sg_list, bsg_job->reply_payload.sg_cnt, rsp_data, rsp_data_len); } - bsg_job->job_done(bsg_job); + bsg_job->reply_len = sizeof(struct fc_bsg_reply) + + sizeof(response) + sizeof(uint8_t); + fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + + sizeof(struct fc_bsg_reply); + memcpy(fw_sts_ptr, response, sizeof(response)); + fw_sts_ptr += sizeof(response); + *fw_sts_ptr = command_sent; + +done_free_dma_rsp: dma_free_coherent(&ha->pdev->dev, rsp_data_len, rsp_data, rsp_data_dma); done_free_dma_req: @@ -853,6 +844,8 @@ done_unmap_req_sg: dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + if (!rval) + bsg_job->job_done(bsg_job); return rval; } @@ -877,16 +870,15 @@ qla84xx_reset(struct fc_bsg_job *bsg_job) if (rval) { ql_log(ql_log_warn, vha, 0x7030, "Vendor request 84xx reset failed.\n"); - rval = 0; - bsg_job->reply->result = (DID_ERROR << 16); + rval = (DID_ERROR << 16); } else { ql_dbg(ql_dbg_user, vha, 0x7031, "Vendor request 84xx reset completed.\n"); bsg_job->reply->result = DID_OK; + bsg_job->job_done(bsg_job); } - bsg_job->job_done(bsg_job); return rval; } @@ -976,8 +968,7 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job) ql_log(ql_log_warn, vha, 0x7037, "Vendor request 84xx updatefw failed.\n"); - rval = 0; - bsg_job->reply->result = (DID_ERROR << 16); + rval = (DID_ERROR << 16); } else { ql_dbg(ql_dbg_user, vha, 0x7038, "Vendor request 84xx updatefw completed.\n"); @@ -986,7 +977,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job) bsg_job->reply->result = DID_OK; } - bsg_job->job_done(bsg_job); dma_pool_free(ha->s_dma_pool, mn, mn_dma); done_free_fw_buf: @@ -996,6 +986,8 @@ done_unmap_sg: dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + if (!rval) + bsg_job->job_done(bsg_job); return rval; } @@ -1163,8 +1155,7 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) ql_log(ql_log_warn, vha, 0x7043, "Vendor request 84xx mgmt failed.\n"); - rval = 0; - bsg_job->reply->result = (DID_ERROR << 16); + rval = (DID_ERROR << 16); } else { ql_dbg(ql_dbg_user, vha, 0x7044, @@ -1184,8 +1175,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) } } - bsg_job->job_done(bsg_job); - done_unmap_sg: if (mgmt_b) dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma); @@ -1200,6 +1189,8 @@ done_unmap_sg: exit_mgmt: dma_pool_free(ha->s_dma_pool, mn, mn_dma); + if (!rval) + bsg_job->job_done(bsg_job); return rval; } @@ -1276,9 +1267,7 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], fcport->port_name[6], fcport->port_name[7], rval, fcport->fp_speed, mb[0], mb[1]); - rval = 0; - bsg_job->reply->result = (DID_ERROR << 16); - + rval = (DID_ERROR << 16); } else { if (!port_param->mode) { bsg_job->reply_len = sizeof(struct fc_bsg_reply) + @@ -1292,9 +1281,9 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) } bsg_job->reply->result = DID_OK; + bsg_job->job_done(bsg_job); } - bsg_job->job_done(bsg_job); return rval; } @@ -1887,8 +1876,6 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job) return qla24xx_process_bidir_cmd(bsg_job); default: - bsg_job->reply->result = (DID_ERROR << 16); - bsg_job->job_done(bsg_job); return -ENOSYS; } } @@ -1919,8 +1906,6 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) ql_dbg(ql_dbg_user, vha, 0x709f, "BSG: ISP abort active/needed -- cmd=%d.\n", bsg_job->request->msgcode); - bsg_job->reply->result = (DID_ERROR << 16); - bsg_job->job_done(bsg_job); return -EBUSY; } @@ -1943,7 +1928,6 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) case FC_BSG_RPT_CT: default: ql_log(ql_log_warn, vha, 0x705a, "Unsupported BSG request.\n"); - bsg_job->reply->result = ret; break; } return ret; diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 44efe3c..53f9e49 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -11,7 +11,7 @@ * ---------------------------------------------------------------------- * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- - * | Module Init and Probe | 0x0124 | 0x4b,0xba,0xfa | + * | Module Init and Probe | 0x0125 | 0x4b,0xba,0xfa | * | Mailbox commands | 0x114f | 0x111a-0x111b | * | | | 0x112c-0x112e | * | | | 0x113a | @@ -526,8 +526,8 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain) ha->max_req_queues : ha->max_rsp_queues; mq->count = htonl(que_cnt); for (cnt = 0; cnt < que_cnt; cnt++) { - reg = (struct device_reg_25xxmq *) ((void *) - ha->mqiobase + cnt * QLA_QUE_PAGE); + reg = (struct device_reg_25xxmq __iomem *) + (ha->mqiobase + cnt * QLA_QUE_PAGE); que_idx = cnt * 4; mq->qregs[que_idx] = htonl(RD_REG_DWORD(®->req_q_in)); mq->qregs[que_idx+1] = htonl(RD_REG_DWORD(®->req_q_out)); @@ -2268,7 +2268,7 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) if (!cnt) { nxt = fw->code_ram; - nxt += sizeof(fw->code_ram), + nxt += sizeof(fw->code_ram); nxt += (ha->fw_memory_size - 0x100000 + 1); goto copy_queue; } else diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index a9725bf..6e7727f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2486,9 +2486,9 @@ struct bidi_statistics { #define QLA_MAX_QUEUES 256 #define ISP_QUE_REG(ha, id) \ ((ha->mqenable || IS_QLA83XX(ha)) ? \ - ((void *)(ha->mqiobase) +\ + ((device_reg_t __iomem *)(ha->mqiobase) +\ (QLA_QUE_PAGE * id)) :\ - ((void *)(ha->iobase))) + ((device_reg_t __iomem *)(ha->iobase))) #define QLA_REQ_QUE_ID(tag) \ ((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0) #define QLA_DEFAULT_QUE_QOS 5 diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 59524aa..be6d61a 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1092,6 +1092,27 @@ struct device_reg_24xx { uint32_t unused_6[2]; /* Gap. */ uint32_t iobase_sdata; }; +/* RISC-RISC semaphore register PCI offet */ +#define RISC_REGISTER_BASE_OFFSET 0x7010 +#define RISC_REGISTER_WINDOW_OFFET 0x6 + +/* RISC-RISC semaphore/flag register (risc address 0x7016) */ + +#define RISC_SEMAPHORE 0x1UL +#define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16) +#define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL) +#define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE) + +#define RISC_SEMAPHORE_FORCE 0x8000UL +#define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16) +#define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL) +#define RISC_SEMAPHORE_FORCE_SET \ + (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE) + +/* RISC semaphore timeouts (ms) */ +#define TIMEOUT_SEMAPHORE 2500 +#define TIMEOUT_SEMAPHORE_FORCE 2000 +#define TIMEOUT_TOTAL_ELAPSED 4500 /* Trace Control *************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 6acb397..2411d1a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -416,7 +416,7 @@ extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *); extern void qla2x00_free_irqs(scsi_qla_host_t *); extern int qla2x00_get_data_rate(scsi_qla_host_t *); -extern char *qla2x00_get_link_speed_str(struct qla_hw_data *); +extern const char *qla2x00_get_link_speed_str(struct qla_hw_data *, uint16_t); /* * Global Function Prototypes in qla_sup.c source file. @@ -598,7 +598,6 @@ extern void qla82xx_init_flags(struct qla_hw_data *); /* ISP 8021 hardware related */ extern void qla82xx_set_drv_active(scsi_qla_host_t *); -extern void qla82xx_crb_win_unlock(struct qla_hw_data *); extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32); extern int qla82xx_rd_32(struct qla_hw_data *, ulong); extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index f4e4bd7..01efc0e 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -218,6 +218,9 @@ qla2x00_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport) memcpy(fcport->port_name, ct_rsp->rsp.ga_nxt.port_name, WWN_SIZE); + fcport->fc4_type = (ct_rsp->rsp.ga_nxt.fc4_types[2] & BIT_0) ? + FC4_TYPE_FCP_SCSI : FC4_TYPE_OTHER; + if (ct_rsp->rsp.ga_nxt.port_type != NS_N_PORT_TYPE && ct_rsp->rsp.ga_nxt.port_type != NS_NL_PORT_TYPE) fcport->d_id.b.domain = 0xf0; @@ -1930,6 +1933,9 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list) case BIT_11: list[i].fp_speed = PORT_SPEED_8GB; break; + case BIT_10: + list[i].fp_speed = PORT_SPEED_16GB; + break; } ql_dbg(ql_dbg_disc, vha, 0x205b, diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 48fca47..563eee3 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -429,7 +429,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, /* QLogic ISP2x00 Hardware Support Functions. */ /****************************************************************************/ -int +static int qla83xx_nic_core_fw_load(scsi_qla_host_t *vha) { int rval = QLA_SUCCESS; @@ -997,7 +997,7 @@ qla2x00_reset_chip(scsi_qla_host_t *vha) * * Returns 0 on success. */ -int +static int qla81xx_reset_mpi(scsi_qla_host_t *vha) { uint16_t mb[4] = {0x1010, 0, 1, 0}; @@ -1095,6 +1095,83 @@ qla24xx_reset_risc(scsi_qla_host_t *vha) ha->isp_ops->enable_intrs(ha); } +static void +qla25xx_read_risc_sema_reg(scsi_qla_host_t *vha, uint32_t *data) +{ + struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24; + + WRT_REG_DWORD(®->iobase_addr, RISC_REGISTER_BASE_OFFSET); + *data = RD_REG_DWORD(®->iobase_window + RISC_REGISTER_WINDOW_OFFET); + +} + +static void +qla25xx_write_risc_sema_reg(scsi_qla_host_t *vha, uint32_t data) +{ + struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24; + + WRT_REG_DWORD(®->iobase_addr, RISC_REGISTER_BASE_OFFSET); + WRT_REG_DWORD(®->iobase_window + RISC_REGISTER_WINDOW_OFFET, data); +} + +static void +qla25xx_manipulate_risc_semaphore(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + uint32_t wd32 = 0; + uint delta_msec = 100; + uint elapsed_msec = 0; + uint timeout_msec; + ulong n; + + if (!IS_QLA25XX(ha) && !IS_QLA2031(ha)) + return; + +attempt: + timeout_msec = TIMEOUT_SEMAPHORE; + n = timeout_msec / delta_msec; + while (n--) { + qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_SET); + qla25xx_read_risc_sema_reg(vha, &wd32); + if (wd32 & RISC_SEMAPHORE) + break; + msleep(delta_msec); + elapsed_msec += delta_msec; + if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED) + goto force; + } + + if (!(wd32 & RISC_SEMAPHORE)) + goto force; + + if (!(wd32 & RISC_SEMAPHORE_FORCE)) + goto acquired; + + qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_CLR); + timeout_msec = TIMEOUT_SEMAPHORE_FORCE; + n = timeout_msec / delta_msec; + while (n--) { + qla25xx_read_risc_sema_reg(vha, &wd32); + if (!(wd32 & RISC_SEMAPHORE_FORCE)) + break; + msleep(delta_msec); + elapsed_msec += delta_msec; + if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED) + goto force; + } + + if (wd32 & RISC_SEMAPHORE_FORCE) + qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_CLR); + + goto attempt; + +force: + qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_SET); + +acquired: + return; +} + /** * qla24xx_reset_chip() - Reset ISP24xx chip. * @ha: HA context @@ -1113,6 +1190,8 @@ qla24xx_reset_chip(scsi_qla_host_t *vha) ha->isp_ops->disable_intrs(ha); + qla25xx_manipulate_risc_semaphore(vha); + /* Perform RISC reset. */ qla24xx_reset_risc(vha); } @@ -1888,10 +1967,6 @@ qla2x00_init_rings(scsi_qla_host_t *vha) qla2x00_init_response_q_entries(rsp); } - spin_lock(&ha->vport_slock); - - spin_unlock(&ha->vport_slock); - ha->tgt.atio_ring_ptr = ha->tgt.atio_ring; ha->tgt.atio_ring_index = 0; /* Initialize ATIO queue entries */ @@ -1971,6 +2046,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha) "Waiting for LIP to complete.\n"); do { + memset(state, -1, sizeof(state)); rval = qla2x00_get_firmware_state(vha, state); if (rval == QLA_SUCCESS) { if (state[0] < FSTATE_LOSS_OF_SYNC) { @@ -2907,7 +2983,6 @@ cleanup_allocation: static void qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) { - char *link_speed; int rval; uint16_t mb[4]; struct qla_hw_data *ha = vha->hw; @@ -2934,10 +3009,10 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) fcport->port_name[6], fcport->port_name[7], rval, fcport->fp_speed, mb[0], mb[1]); } else { - link_speed = qla2x00_get_link_speed_str(ha); ql_dbg(ql_dbg_disc, vha, 0x2005, "iIDMA adjusted to %s GB/s " - "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", link_speed, + "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", + qla2x00_get_link_speed_str(ha, fcport->fp_speed), fcport->port_name[0], fcport->port_name[1], fcport->port_name[2], fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], @@ -3007,10 +3082,10 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) fcport->login_retry = 0; fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); + qla2x00_set_fcport_state(fcport, FCS_ONLINE); qla2x00_iidma_fcport(vha, fcport); qla24xx_update_fcport_fcp_prio(vha, fcport); qla2x00_reg_remote_port(vha, fcport); - qla2x00_set_fcport_state(fcport, FCS_ONLINE); } /* @@ -3868,7 +3943,7 @@ qla83xx_reset_ownership(scsi_qla_host_t *vha) } } -int +static int __qla83xx_set_drv_ack(scsi_qla_host_t *vha) { int rval = QLA_SUCCESS; @@ -3884,19 +3959,7 @@ __qla83xx_set_drv_ack(scsi_qla_host_t *vha) return rval; } -int -qla83xx_set_drv_ack(scsi_qla_host_t *vha) -{ - int rval = QLA_SUCCESS; - - qla83xx_idc_lock(vha, 0); - rval = __qla83xx_set_drv_ack(vha); - qla83xx_idc_unlock(vha, 0); - - return rval; -} - -int +static int __qla83xx_clear_drv_ack(scsi_qla_host_t *vha) { int rval = QLA_SUCCESS; @@ -3912,19 +3975,7 @@ __qla83xx_clear_drv_ack(scsi_qla_host_t *vha) return rval; } -int -qla83xx_clear_drv_ack(scsi_qla_host_t *vha) -{ - int rval = QLA_SUCCESS; - - qla83xx_idc_lock(vha, 0); - rval = __qla83xx_clear_drv_ack(vha); - qla83xx_idc_unlock(vha, 0); - - return rval; -} - -const char * +static const char * qla83xx_dev_state_to_string(uint32_t dev_state) { switch (dev_state) { @@ -3978,7 +4029,7 @@ qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type) } /* Assumes idc_lock always held on entry */ -int +static int qla83xx_initiating_reset(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; @@ -4026,36 +4077,12 @@ __qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control) } int -qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control) -{ - int rval = QLA_SUCCESS; - - qla83xx_idc_lock(vha, 0); - rval = __qla83xx_set_idc_control(vha, idc_control); - qla83xx_idc_unlock(vha, 0); - - return rval; -} - -int __qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control) { return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control); } -int -qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control) -{ - int rval = QLA_SUCCESS; - - qla83xx_idc_lock(vha, 0); - rval = __qla83xx_get_idc_control(vha, idc_control); - qla83xx_idc_unlock(vha, 0); - - return rval; -} - -int +static int qla83xx_check_driver_presence(scsi_qla_host_t *vha) { uint32_t drv_presence = 0; diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 03b7526..a481684 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -520,7 +520,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req, mrk24 = NULL; req = ha->req_q_map[0]; - mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, 0); + mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, NULL); if (mrk == NULL) { ql_log(ql_log_warn, base_vha, 0x3026, "Failed to allocate Marker IOCB.\n"); @@ -2551,7 +2551,7 @@ sufficient_dsds: (unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); wmb(); - while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { + while (RD_REG_DWORD((void __iomem *)ha->nxdb_rd_ptr) != dbval) { WRT_REG_DWORD( (unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); @@ -2748,7 +2748,6 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds) struct rsp_que *rsp; struct req_que *req; int rval = EXT_STATUS_OK; - device_reg_t __iomem *reg = ISP_QUE_REG(ha, vha->req->id); rval = QLA_SUCCESS; @@ -2786,15 +2785,7 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds) /* Check for room on request queue. */ if (req->cnt < req_cnt + 2) { - if (ha->mqenable) - cnt = RD_REG_DWORD(®->isp25mq.req_q_out); - else if (IS_QLA82XX(ha)) - cnt = RD_REG_DWORD(®->isp82.req_q_out); - else if (IS_FWI2_CAPABLE(ha)) - cnt = RD_REG_DWORD(®->isp24.req_q_out); - else - cnt = qla2x00_debounce_register( - ISP_REQ_Q_OUT(ha, ®->isp)); + cnt = RD_REG_DWORD_RELAXED(req->req_q_out); if (req->ring_index < cnt) req->cnt = cnt - req->ring_index; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 9d1c7b5..873c820 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -316,28 +316,24 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr) } #define LS_UNKNOWN 2 -char * -qla2x00_get_link_speed_str(struct qla_hw_data *ha) +const char * +qla2x00_get_link_speed_str(struct qla_hw_data *ha, uint16_t speed) { - static char *link_speeds[] = {"1", "2", "?", "4", "8", "16", "10"}; - char *link_speed; - int fw_speed = ha->link_data_rate; + static const char * const link_speeds[] = { + "1", "2", "?", "4", "8", "16", "10" + }; if (IS_QLA2100(ha) || IS_QLA2200(ha)) - link_speed = link_speeds[0]; - else if (fw_speed == 0x13) - link_speed = link_speeds[6]; - else { - link_speed = link_speeds[LS_UNKNOWN]; - if (fw_speed < 6) - link_speed = - link_speeds[fw_speed]; - } - - return link_speed; + return link_speeds[0]; + else if (speed == 0x13) + return link_speeds[6]; + else if (speed < 6) + return link_speeds[speed]; + else + return link_speeds[LS_UNKNOWN]; } -void +static void qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb) { struct qla_hw_data *ha = vha->hw; @@ -671,7 +667,7 @@ skip_rio: ql_dbg(ql_dbg_async, vha, 0x500a, "LOOP UP detected (%s Gbps).\n", - qla2x00_get_link_speed_str(ha)); + qla2x00_get_link_speed_str(ha, ha->link_data_rate)); vha->flags.management_server_logged_in = 0; qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate); @@ -860,7 +856,7 @@ skip_rio: mb[1], mb[2], mb[3]); ql_log(ql_log_warn, vha, 0x505f, "Link is operational (%s Gbps).\n", - qla2x00_get_link_speed_str(ha)); + qla2x00_get_link_speed_str(ha, ha->link_data_rate)); /* * Mark all devices as missing so we will login again. @@ -2944,7 +2940,9 @@ skip_msi: "Failed to reserve interrupt %d already in use.\n", ha->pdev->irq); goto fail; - } + } else if (!ha->flags.msi_enabled) + ql_dbg(ql_dbg_init, vha, 0x0125, + "INTa mode: Enabled.\n"); clear_risc_ints: diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 18c509f..68c55ea 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3122,7 +3122,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, if (vp_idx == 0 && (MSB(stat) != 1)) goto reg_needed; - if (MSB(stat) != 0) { + if (MSB(stat) != 0 && MSB(stat) != 2) { ql_dbg(ql_dbg_mbx, vha, 0x10ba, "Could not acquire ID for VP[%d].\n", vp_idx); return; @@ -3536,7 +3536,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) if (IS_QLA83XX(ha)) mcp->mb[15] = 0; - reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + + reg = (struct device_reg_25xxmq __iomem *)((ha->mqiobase) + QLA_QUE_PAGE * req->id); mcp->mb[4] = req->id; @@ -3605,7 +3605,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) if (IS_QLA83XX(ha)) mcp->mb[15] = 0; - reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + + reg = (struct device_reg_25xxmq __iomem *)((ha->mqiobase) + QLA_QUE_PAGE * rsp->id); mcp->mb[4] = rsp->id; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index f5e297c..3e3f593 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -36,7 +36,7 @@ #define MAX_CRB_XFORM 60 static unsigned long crb_addr_xform[MAX_CRB_XFORM]; -int qla82xx_crb_table_initialized; +static int qla82xx_crb_table_initialized; #define qla82xx_crb_addr_transform(name) \ (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ @@ -102,7 +102,7 @@ static void qla82xx_crb_addr_transform_setup(void) qla82xx_crb_table_initialized = 1; } -struct crb_128M_2M_block_map crb_128M_2M_map[64] = { +static struct crb_128M_2M_block_map crb_128M_2M_map[64] = { {{{0, 0, 0, 0} } }, {{{1, 0x0100000, 0x0102000, 0x120000}, {1, 0x0110000, 0x0120000, 0x130000}, @@ -262,7 +262,7 @@ struct crb_128M_2M_block_map crb_128M_2M_map[64] = { /* * top 12 bits of crb internal address (hub, agent) */ -unsigned qla82xx_crb_hub_agt[64] = { +static unsigned qla82xx_crb_hub_agt[64] = { 0, QLA82XX_HW_CRB_HUB_AGT_ADR_PS, QLA82XX_HW_CRB_HUB_AGT_ADR_MN, @@ -330,7 +330,7 @@ unsigned qla82xx_crb_hub_agt[64] = { }; /* Device states */ -char *q_dev_state[] = { +static char *q_dev_state[] = { "Unknown", "Cold", "Initializing", @@ -359,12 +359,13 @@ qla82xx_pci_set_crbwindow_2M(struct qla_hw_data *ha, ulong *off) ha->crb_win = CRB_HI(*off); writel(ha->crb_win, - (void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + (void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); /* Read back value to make sure write has gone through before trying * to use it. */ - win_read = RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + win_read = RD_REG_DWORD((void __iomem *) + (CRB_WINDOW_2M + ha->nx_pcibase)); if (win_read != ha->crb_win) { ql_dbg(ql_dbg_p3p, vha, 0xb000, "%s: Written crbwin (0x%x) " @@ -567,7 +568,7 @@ qla82xx_pci_mem_bound_check(struct qla_hw_data *ha, return 1; } -int qla82xx_pci_set_window_warning_count; +static int qla82xx_pci_set_window_warning_count; static unsigned long qla82xx_pci_set_window(struct qla_hw_data *ha, unsigned long long addr) @@ -677,10 +678,10 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, u64 off, void *data, int size) { unsigned long flags; - void *addr = NULL; + void __iomem *addr = NULL; int ret = 0; u64 start; - uint8_t *mem_ptr = NULL; + uint8_t __iomem *mem_ptr = NULL; unsigned long mem_base; unsigned long mem_page; scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); @@ -712,7 +713,7 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); else mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); - if (mem_ptr == 0UL) { + if (mem_ptr == NULL) { *(u8 *)data = 0; return -1; } @@ -749,10 +750,10 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, u64 off, void *data, int size) { unsigned long flags; - void *addr = NULL; + void __iomem *addr = NULL; int ret = 0; u64 start; - uint8_t *mem_ptr = NULL; + uint8_t __iomem *mem_ptr = NULL; unsigned long mem_base; unsigned long mem_page; scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); @@ -784,7 +785,7 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); else mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); - if (mem_ptr == 0UL) + if (mem_ptr == NULL) return -1; addr = mem_ptr; @@ -908,24 +909,24 @@ qla82xx_wait_rom_done(struct qla_hw_data *ha) return 0; } -int +static int qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag) { uint32_t off_value, rval = 0; - WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase), + WRT_REG_DWORD((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase), (off & 0xFFFF0000)); /* Read back value to make sure write has gone through */ - RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + RD_REG_DWORD((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); off_value = (off & 0x0000FFFF); if (flag) - WRT_REG_DWORD((void *) + WRT_REG_DWORD((void __iomem *) (off_value + CRB_INDIRECT_2M + ha->nx_pcibase), data); else - rval = RD_REG_DWORD((void *) + rval = RD_REG_DWORD((void __iomem *) (off_value + CRB_INDIRECT_2M + ha->nx_pcibase)); return rval; @@ -1654,7 +1655,6 @@ qla82xx_iospace_config(struct qla_hw_data *ha) if (!ha->nx_pcibase) { ql_log_pci(ql_log_fatal, ha->pdev, 0x000e, "Cannot remap pcibase MMIO, aborting.\n"); - pci_release_regions(ha->pdev); goto iospace_error_exit; } @@ -1669,7 +1669,6 @@ qla82xx_iospace_config(struct qla_hw_data *ha) if (!ha->nxdb_wr_ptr) { ql_log_pci(ql_log_fatal, ha->pdev, 0x000f, "Cannot remap MMIO, aborting.\n"); - pci_release_regions(ha->pdev); goto iospace_error_exit; } @@ -1764,14 +1763,6 @@ void qla82xx_config_rings(struct scsi_qla_host *vha) WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_out[0], 0); } -void qla82xx_reset_adapter(struct scsi_qla_host *vha) -{ - struct qla_hw_data *ha = vha->hw; - vha->flags.online = 0; - qla2x00_try_to_stop_firmware(vha); - ha->isp_ops->disable_intrs(ha); -} - static int qla82xx_fw_load_from_blob(struct qla_hw_data *ha) { @@ -1856,7 +1847,7 @@ qla82xx_set_product_offset(struct qla_hw_data *ha) return -1; } -int +static int qla82xx_validate_firmware_blob(scsi_qla_host_t *vha, uint8_t fw_type) { __le32 val; @@ -1961,20 +1952,6 @@ qla82xx_check_rcvpeg_state(struct qla_hw_data *ha) } /* ISR related functions */ -uint32_t qla82xx_isr_int_target_mask_enable[8] = { - ISR_INT_TARGET_MASK, ISR_INT_TARGET_MASK_F1, - ISR_INT_TARGET_MASK_F2, ISR_INT_TARGET_MASK_F3, - ISR_INT_TARGET_MASK_F4, ISR_INT_TARGET_MASK_F5, - ISR_INT_TARGET_MASK_F7, ISR_INT_TARGET_MASK_F7 -}; - -uint32_t qla82xx_isr_int_target_status[8] = { - ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1, - ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3, - ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5, - ISR_INT_TARGET_STATUS_F7, ISR_INT_TARGET_STATUS_F7 -}; - static struct qla82xx_legacy_intr_set legacy_intr[] = \ QLA82XX_LEGACY_INTR_CONFIG; @@ -2813,7 +2790,7 @@ qla82xx_start_iocbs(scsi_qla_host_t *vha) else { WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); wmb(); - while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { + while (RD_REG_DWORD((void __iomem *)ha->nxdb_rd_ptr) != dbval) { WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); wmb(); @@ -2821,7 +2798,8 @@ qla82xx_start_iocbs(scsi_qla_host_t *vha) } } -void qla82xx_rom_lock_recovery(struct qla_hw_data *ha) +static void +qla82xx_rom_lock_recovery(struct qla_hw_data *ha) { scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); @@ -3177,7 +3155,7 @@ qla82xx_check_md_needed(scsi_qla_host_t *vha) } -int +static int qla82xx_check_fw_alive(scsi_qla_host_t *vha) { uint32_t fw_heartbeat_counter; @@ -3817,7 +3795,8 @@ qla82xx_minidump_process_rdocm(scsi_qla_host_t *vha, loop_cnt = ocm_hdr->op_count; for (i = 0; i < loop_cnt; i++) { - r_value = RD_REG_DWORD((void *)(r_addr + ha->nx_pcibase)); + r_value = RD_REG_DWORD((void __iomem *) + (r_addr + ha->nx_pcibase)); *data_ptr++ = cpu_to_le32(r_value); r_addr += r_stride; } @@ -4376,7 +4355,7 @@ qla82xx_md_free(scsi_qla_host_t *vha) ha->md_tmplt_hdr, ha->md_template_size / 1024); dma_free_coherent(&ha->pdev->dev, ha->md_template_size, ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma); - ha->md_tmplt_hdr = 0; + ha->md_tmplt_hdr = NULL; } /* Release the template data buffer allocated */ @@ -4386,7 +4365,7 @@ qla82xx_md_free(scsi_qla_host_t *vha) ha->md_dump, ha->md_dump_size / 1024); vfree(ha->md_dump); ha->md_dump_size = 0; - ha->md_dump = 0; + ha->md_dump = NULL; } } @@ -4423,7 +4402,7 @@ qla82xx_md_prep(scsi_qla_host_t *vha) dma_free_coherent(&ha->pdev->dev, ha->md_template_size, ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma); - ha->md_tmplt_hdr = 0; + ha->md_tmplt_hdr = NULL; } } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index d501bf5..3a1661c 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -41,7 +41,7 @@ static struct kmem_cache *ctx_cachep; */ int ql_errlev = ql_log_all; -int ql2xenableclass2; +static int ql2xenableclass2; module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xenableclass2, "Specify if Class 2 operations are supported from the very " @@ -89,6 +89,8 @@ MODULE_PARM_DESC(ql2xextended_error_logging, "\t\t0x00200000 - AER/EEH. 0x00100000 - Multi Q.\n" "\t\t0x00080000 - P3P Specific. 0x00040000 - Virtual Port.\n" "\t\t0x00020000 - Buffer Dump. 0x00010000 - Misc.\n" + "\t\t0x00008000 - Verbose. 0x00004000 - Target.\n" + "\t\t0x00002000 - Target Mgmt. 0x00001000 - Target TMF.\n" "\t\t0x7fffffff - For enabling all logs, can be too many logs.\n" "\t\t0x1e400000 - Preferred value for capturing essential " "debug information (equivalent to old " @@ -494,12 +496,20 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str) (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4; strcpy(str, "PCIe ("); - if (lspeed == 1) + switch (lspeed) { + case 1: strcat(str, "2.5GT/s "); - else if (lspeed == 2) + break; + case 2: strcat(str, "5.0GT/s "); - else + break; + case 3: + strcat(str, "8.0GT/s "); + break; + default: strcat(str, "<unknown> "); + break; + } snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth); strcat(str, lwstr); @@ -719,7 +729,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) rval = ha->isp_ops->start_scsi(sp); if (rval != QLA_SUCCESS) { - ql_dbg(ql_dbg_io, vha, 0x3013, + ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013, "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd); goto qc24_host_busy_free_sp; } @@ -2357,7 +2367,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Configure PCI I/O space */ ret = ha->isp_ops->iospace_config(ha); if (ret) - goto probe_hw_failed; + goto iospace_config_failed; ql_log_pci(ql_log_info, pdev, 0x001d, "Found an ISP%04X irq %d iobase 0x%p.\n", @@ -2668,7 +2678,11 @@ probe_hw_failed: qla82xx_idc_lock(ha); qla82xx_clear_drv_active(ha); qla82xx_idc_unlock(ha); - iounmap((device_reg_t __iomem *)ha->nx_pcibase); + } +iospace_config_failed: + if (IS_QLA82XX(ha)) { + if (!ha->nx_pcibase) + iounmap((device_reg_t __iomem *)ha->nx_pcibase); if (!ql2xdbwr) iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr); } else { @@ -2755,6 +2769,7 @@ qla2x00_remove_one(struct pci_dev *pdev) ha->flags.host_shutting_down = 1; + set_bit(UNLOADING, &base_vha->dpc_flags); mutex_lock(&ha->vport_lock); while (ha->cur_vport_count) { struct Scsi_Host *scsi_host; @@ -2784,8 +2799,6 @@ qla2x00_remove_one(struct pci_dev *pdev) "Error while clearing DRV-Presence.\n"); } - set_bit(UNLOADING, &base_vha->dpc_flags); - qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); qla2x00_dfs_remove(base_vha); @@ -3721,10 +3734,9 @@ void qla2x00_relogin(struct scsi_qla_host *vha) if (fcport->flags & FCF_FCP2_DEVICE) opts |= BIT_1; - status2 = - qla2x00_get_port_database( - vha, fcport, - opts); + status2 = + qla2x00_get_port_database( + vha, fcport, opts); if (status2 != QLA_SUCCESS) status = 1; } @@ -3836,7 +3848,7 @@ qla83xx_idc_state_handler_work(struct work_struct *work) qla83xx_idc_unlock(base_vha, 0); } -int +static int qla83xx_check_nic_core_fw_alive(scsi_qla_host_t *base_vha) { int rval = QLA_SUCCESS; @@ -3954,7 +3966,7 @@ qla83xx_wait_logic(void) } } -int +static int qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha) { int rval; @@ -4013,7 +4025,7 @@ qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha) return rval; } -int +static int qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha) { int rval = QLA_SUCCESS; @@ -4212,7 +4224,7 @@ qla83xx_clear_drv_presence(scsi_qla_host_t *vha) return rval; } -void +static void qla83xx_need_reset_handler(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; @@ -4224,7 +4236,7 @@ qla83xx_need_reset_handler(scsi_qla_host_t *vha) while (1) { qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack); qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); - if (drv_ack == drv_presence) + if ((drv_ack & drv_presence) == drv_presence) break; if (time_after_eq(jiffies, ack_timeout)) { @@ -4251,7 +4263,7 @@ qla83xx_need_reset_handler(scsi_qla_host_t *vha) ql_log(ql_log_info, vha, 0xb068, "HW State: COLD/RE-INIT.\n"); } -int +static int qla83xx_device_bootstrap(scsi_qla_host_t *vha) { int rval = QLA_SUCCESS; @@ -4505,9 +4517,9 @@ qla2x00_do_dpc(void *data) "ISP abort end.\n"); } - if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) { + if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, + &base_vha->dpc_flags)) { qla2x00_update_fcports(base_vha); - clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags); } if (test_bit(SCR_PENDING, &base_vha->dpc_flags)) { @@ -4987,7 +4999,8 @@ qla2xxx_pci_mmio_enabled(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } -uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha) +static uint32_t +qla82xx_error_recovery(scsi_qla_host_t *base_vha) { uint32_t rval = QLA_FUNCTION_FAILED; uint32_t drv_active = 0; diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index b49d217..ad1dc14 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1029,7 +1029,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt) EXPORT_SYMBOL(qlt_stop_phase2); /* Called from qlt_remove_target() -> qla2x00_remove_one() */ -void qlt_release(struct qla_tgt *tgt) +static void qlt_release(struct qla_tgt *tgt) { struct qla_hw_data *ha = tgt->ha; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index cfe934e..49697ca 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.04.00.07-k" +#define QLA2XXX_VERSION "8.04.00.08-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 4 diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index dc0ad85..8f6b12c 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -16,16 +16,14 @@ #include "scsi_priv.h" -static int scsi_dev_type_suspend(struct device *dev, pm_message_t msg) +static int scsi_dev_type_suspend(struct device *dev, int (*cb)(struct device *)) { - struct device_driver *drv; int err; err = scsi_device_quiesce(to_scsi_device(dev)); if (err == 0) { - drv = dev->driver; - if (drv && drv->suspend) { - err = drv->suspend(dev, msg); + if (cb) { + err = cb(dev); if (err) scsi_device_resume(to_scsi_device(dev)); } @@ -34,14 +32,12 @@ static int scsi_dev_type_suspend(struct device *dev, pm_message_t msg) return err; } -static int scsi_dev_type_resume(struct device *dev) +static int scsi_dev_type_resume(struct device *dev, int (*cb)(struct device *)) { - struct device_driver *drv; int err = 0; - drv = dev->driver; - if (drv && drv->resume) - err = drv->resume(dev); + if (cb) + err = cb(dev); scsi_device_resume(to_scsi_device(dev)); dev_dbg(dev, "scsi resume: %d\n", err); return err; @@ -49,51 +45,39 @@ static int scsi_dev_type_resume(struct device *dev) #ifdef CONFIG_PM_SLEEP -static int scsi_bus_suspend_common(struct device *dev, pm_message_t msg) +static int +scsi_bus_suspend_common(struct device *dev, int (*cb)(struct device *)) { int err = 0; if (scsi_is_sdev_device(dev)) { /* - * sd is the only high-level SCSI driver to implement runtime - * PM, and sd treats runtime suspend, system suspend, and - * system hibernate identically (but not system freeze). + * All the high-level SCSI drivers that implement runtime + * PM treat runtime suspend, system suspend, and system + * hibernate identically. */ - if (pm_runtime_suspended(dev)) { - if (msg.event == PM_EVENT_SUSPEND || - msg.event == PM_EVENT_HIBERNATE) - return 0; /* already suspended */ + if (pm_runtime_suspended(dev)) + return 0; - /* wake up device so that FREEZE will succeed */ - pm_runtime_resume(dev); - } - err = scsi_dev_type_suspend(dev, msg); + err = scsi_dev_type_suspend(dev, cb); } + return err; } -static int scsi_bus_resume_common(struct device *dev) +static int +scsi_bus_resume_common(struct device *dev, int (*cb)(struct device *)) { int err = 0; - /* - * Parent device may have runtime suspended as soon as - * it is woken up during the system resume. - * - * Resume it on behalf of child. - */ - pm_runtime_get_sync(dev->parent); - if (scsi_is_sdev_device(dev)) - err = scsi_dev_type_resume(dev); + err = scsi_dev_type_resume(dev, cb); + if (err == 0) { pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); } - - pm_runtime_put_sync(dev->parent); - return err; } @@ -112,26 +96,49 @@ static int scsi_bus_prepare(struct device *dev) static int scsi_bus_suspend(struct device *dev) { - return scsi_bus_suspend_common(dev, PMSG_SUSPEND); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_suspend_common(dev, pm ? pm->suspend : NULL); +} + +static int scsi_bus_resume(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_resume_common(dev, pm ? pm->resume : NULL); } static int scsi_bus_freeze(struct device *dev) { - return scsi_bus_suspend_common(dev, PMSG_FREEZE); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_suspend_common(dev, pm ? pm->freeze : NULL); +} + +static int scsi_bus_thaw(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_resume_common(dev, pm ? pm->thaw : NULL); } static int scsi_bus_poweroff(struct device *dev) { - return scsi_bus_suspend_common(dev, PMSG_HIBERNATE); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_suspend_common(dev, pm ? pm->poweroff : NULL); +} + +static int scsi_bus_restore(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + return scsi_bus_resume_common(dev, pm ? pm->restore : NULL); } #else /* CONFIG_PM_SLEEP */ -#define scsi_bus_resume_common NULL #define scsi_bus_prepare NULL #define scsi_bus_suspend NULL +#define scsi_bus_resume NULL #define scsi_bus_freeze NULL +#define scsi_bus_thaw NULL #define scsi_bus_poweroff NULL +#define scsi_bus_restore NULL #endif /* CONFIG_PM_SLEEP */ @@ -140,10 +147,12 @@ static int scsi_bus_poweroff(struct device *dev) static int scsi_runtime_suspend(struct device *dev) { int err = 0; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; dev_dbg(dev, "scsi_runtime_suspend\n"); if (scsi_is_sdev_device(dev)) { - err = scsi_dev_type_suspend(dev, PMSG_AUTO_SUSPEND); + err = scsi_dev_type_suspend(dev, + pm ? pm->runtime_suspend : NULL); if (err == -EAGAIN) pm_schedule_suspend(dev, jiffies_to_msecs( round_jiffies_up_relative(HZ/10))); @@ -157,10 +166,11 @@ static int scsi_runtime_suspend(struct device *dev) static int scsi_runtime_resume(struct device *dev) { int err = 0; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; dev_dbg(dev, "scsi_runtime_resume\n"); if (scsi_is_sdev_device(dev)) - err = scsi_dev_type_resume(dev); + err = scsi_dev_type_resume(dev, pm ? pm->runtime_resume : NULL); /* Insert hooks here for targets, hosts, and transport classes */ @@ -239,11 +249,11 @@ void scsi_autopm_put_host(struct Scsi_Host *shost) const struct dev_pm_ops scsi_bus_pm_ops = { .prepare = scsi_bus_prepare, .suspend = scsi_bus_suspend, - .resume = scsi_bus_resume_common, + .resume = scsi_bus_resume, .freeze = scsi_bus_freeze, - .thaw = scsi_bus_resume_common, + .thaw = scsi_bus_thaw, .poweroff = scsi_bus_poweroff, - .restore = scsi_bus_resume_common, + .restore = scsi_bus_restore, .runtime_suspend = scsi_runtime_suspend, .runtime_resume = scsi_runtime_resume, .runtime_idle = scsi_runtime_idle, diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index ce5224c..931a7d9 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -247,11 +247,11 @@ show_shost_active_mode(struct device *dev, static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL); -static int check_reset_type(char *str) +static int check_reset_type(const char *str) { - if (strncmp(str, "adapter", 10) == 0) + if (sysfs_streq(str, "adapter")) return SCSI_ADAPTER_RESET; - else if (strncmp(str, "firmware", 10) == 0) + else if (sysfs_streq(str, "firmware")) return SCSI_FIRMWARE_RESET; else return 0; @@ -264,12 +264,9 @@ store_host_reset(struct device *dev, struct device_attribute *attr, struct Scsi_Host *shost = class_to_shost(dev); struct scsi_host_template *sht = shost->hostt; int ret = -EINVAL; - char str[10]; int type; - sscanf(buf, "%s", str); - type = check_reset_type(str); - + type = check_reset_type(buf); if (!type) goto exit_store_host_reset; diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index f7565fc..1b68142 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -151,6 +151,7 @@ static struct { { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" }, { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" }, { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" }, + { SAS_LINK_RATE_12_0_GBPS, "12.0 Gbit" }, }; sas_bitfield_name_search(linkspeed, sas_linkspeed_names) sas_bitfield_name_set(linkspeed, sas_linkspeed_names) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 352bc77..7992635 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -105,7 +105,7 @@ static void sd_unlock_native_capacity(struct gendisk *disk); static int sd_probe(struct device *); static int sd_remove(struct device *); static void sd_shutdown(struct device *); -static int sd_suspend(struct device *, pm_message_t state); +static int sd_suspend(struct device *); static int sd_resume(struct device *); static void sd_rescan(struct device *); static int sd_done(struct scsi_cmnd *); @@ -465,15 +465,23 @@ static struct class sd_disk_class = { .dev_attrs = sd_disk_attrs, }; +static const struct dev_pm_ops sd_pm_ops = { + .suspend = sd_suspend, + .resume = sd_resume, + .poweroff = sd_suspend, + .restore = sd_resume, + .runtime_suspend = sd_suspend, + .runtime_resume = sd_resume, +}; + static struct scsi_driver sd_template = { .owner = THIS_MODULE, .gendrv = { .name = "sd", .probe = sd_probe, .remove = sd_remove, - .suspend = sd_suspend, - .resume = sd_resume, .shutdown = sd_shutdown, + .pm = &sd_pm_ops, }, .rescan = sd_rescan, .done = sd_done, @@ -1011,7 +1019,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff; SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff; SCpnt->cmnd[31] = (unsigned char) this_count & 0xff; - } else if (block > 0xffffffff) { + } else if (sdp->use_16_for_rw) { SCpnt->cmnd[0] += READ_16 - READ_6; SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0; @@ -2203,6 +2211,8 @@ got_data: } } + sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff); + /* Rescale capacity to 512-byte units */ if (sector_size == 4096) sdkp->capacity <<= 3; @@ -3052,7 +3062,7 @@ exit: scsi_disk_put(sdkp); } -static int sd_suspend(struct device *dev, pm_message_t mesg) +static int sd_suspend(struct device *dev) { struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); int ret = 0; @@ -3067,7 +3077,7 @@ static int sd_suspend(struct device *dev, pm_message_t mesg) goto done; } - if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) { + if (sdkp->device->manage_start_stop) { sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); ret = sd_start_stop_device(sdkp, 0); } @@ -3116,10 +3126,6 @@ static int __init init_sd(void) if (err) goto err_out; - err = scsi_register_driver(&sd_template.gendrv); - if (err) - goto err_out_class; - sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE, 0, 0, NULL); if (!sd_cdb_cache) { @@ -3133,8 +3139,15 @@ static int __init init_sd(void) goto err_out_cache; } + err = scsi_register_driver(&sd_template.gendrv); + if (err) + goto err_out_driver; + return 0; +err_out_driver: + mempool_destroy(sd_cdb_pool); + err_out_cache: kmem_cache_destroy(sd_cdb_cache); @@ -3157,10 +3170,10 @@ static void __exit exit_sd(void) SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); + scsi_unregister_driver(&sd_template.gendrv); mempool_destroy(sd_cdb_pool); kmem_cache_destroy(sd_cdb_cache); - scsi_unregister_driver(&sd_template.gendrv); class_unregister(&sd_disk_class); for (i = 0; i < SD_MAJORS; i++) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 595af1a..dd8dc27 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -469,6 +469,8 @@ static int virtscsi_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc) sizeof cmd->req.cmd, sizeof cmd->resp.cmd, GFP_ATOMIC) >= 0) ret = 0; + else + mempool_free(cmd, virtscsi_cmd_pool); out: return ret; diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index e0deeb2..09c2300 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -34,6 +34,7 @@ #define MWAVE_MINOR 219 /* ACP/Mwave Modem */ #define MPT_MINOR 220 #define MPT2SAS_MINOR 221 +#define MPT3SAS_MINOR 222 #define UINPUT_MINOR 223 #define MISC_MCELOG_MINOR 227 #define HPET_MINOR 228 diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 55367b0..e65c62e 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -137,6 +137,7 @@ struct scsi_device { unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ unsigned no_write_same:1; /* no WRITE SAME command */ + unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */ unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ unsigned skip_vpd_pages:1; /* do not read VPD pages */ diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 98b3a20..9b8e088 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -36,6 +36,7 @@ enum sas_linkrate { SAS_LINK_RATE_3_0_GBPS = 9, SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS, SAS_LINK_RATE_6_0_GBPS = 10, + SAS_LINK_RATE_12_0_GBPS = 11, /* These are virtual to the transport class and may never * be signalled normally since the standard defined field * is only 4 bits */ |