aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/Kconfig4
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c2
-rw-r--r--arch/arm/mach-omap2/common.h1
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c5
-rw-r--r--arch/arm/mach-omap2/gpmc-smsc911x.c52
-rw-r--r--arch/arm/mach-omap2/io.c1
-rw-r--r--arch/arm/mach-omap2/mailbox.c13
-rw-r--r--arch/arm/mach-omap2/omap4-common.c25
-rw-r--r--arch/arm/mach-omap2/pm.c3
-rw-r--r--arch/arm/mach-omap2/usb-host.c6
10 files changed, 92 insertions, 20 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d965da4..e20c8ab 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
going on could result in system crashes;
config OMAP4_ERRATA_I688
- bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
- depends on ARCH_OMAP4 && BROKEN
+ bool "OMAP4 errata: Async Bridge Corruption"
+ depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 6b77ad9..a659e19 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f78ec4e..4897ec0 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -132,6 +132,7 @@ void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
+void omap_barriers_init(void);
extern void __init omap_init_consistent_dma_size(void);
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index cfdbb86..72e018b 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
- int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
- new_state_idx = drv->safe_state_index;
- cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+ index = drv->safe_state_index;
+ cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 9970331..bbb870c 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
.flags = SMSC911X_USE_16BIT,
};
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
+ .consumer_supplies = gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+ .supply_name = "gpmc_smsc911x",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
+ .init_data = &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = 42,
+ .dev = {
+ .platform_data = &gpmc_smsc911x_fixed_reg_data,
+ },
+};
+
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpmc_cfg = board_data;
+ ret = platform_device_register(&gpmc_smsc911x_regulator);
+ if (ret < 0) {
+ pr_err("Unable to register smsc911x regulators: %d\n", ret);
+ return;
+ }
+
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3203128..0b73d31 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -304,6 +304,7 @@ void __init omapam33xx_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+ omap_barriers_init();
}
#endif
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 609ea2d..2cc1aa0 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
+#endif
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+ &mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+ &mbox_iva_info,
+#endif
+ NULL
+};
#endif
#if defined(CONFIG_ARCH_OMAP4)
@@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void)
platform_driver_unregister(&omap2_mbox_driver);
}
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 40a8fbc..ebc5950 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -24,6 +24,7 @@
#include <plat/irqs.h>
#include <plat/sram.h>
+#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
void __iomem *dram_sync, *sram_sync;
+static phys_addr_t paddr;
+static u32 size;
+
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
}
}
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
{
- struct map_desc dram_io_desc[1];
- phys_addr_t paddr;
- u32 size;
-
- if (!cpu_is_omap44xx())
- return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
+ return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+ struct map_desc dram_io_desc[1];
+
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
- return 0;
}
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
#endif
void __init gic_init_irq(void)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 2870669..d383f71 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -189,14 +189,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
freq = clk->rate;
clk_put(clk);
+ rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
+ rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 771dc78..f51348d 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
- struct omap_device *od;
+ struct platform_device *pdev;
int bus_id = -1;
int i;
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
return;
}
- od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+ pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;
generated by cgit v1.1 at 2024-12-27 04:06:34 +0000