6 files changed, 12 insertions, 37 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522..0e928d2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -40,7 +40,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -751,8 +750,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -761,8 +759,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
 	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -772,8 +769,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= hrefv60_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -784,8 +780,7 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= snowball_init_machine,
 	.init_late	= NULL,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 5b286e0..218a6b1 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -341,8 +340,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
+	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 721e7b4..5dd90d3 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -17,9 +17,10 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-ux500.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -42,11 +43,6 @@ void __iomem *_PRCMU_BASE;
  * This feels fragile because it depends on the gpio device getting probed
  * _before_ any device uses the gpio interrupts.
 */
-static const struct of_device_id ux500_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-
 void __init ux500_init_irq(void)
 {
 	void __iomem *dist_base;
@@ -62,7 +58,7 @@ void __init ux500_init_irq(void)
 
 #ifdef CONFIG_OF
 	if (of_have_populated_dt())
-		of_irq_init(ux500_dt_irq_match);
+		irqchip_init();
 	else
 #endif
 		gic_init(0, 29, dist_base, cpu_base);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 6be4c4d..bddce2b 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -28,8 +28,7 @@ extern struct device *ux500_soc_device_init(const char *soc_id);
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
 
-struct sys_timer;
-extern struct sys_timer ux500_timer;
+extern void ux500_timer_init(void);
 
 #define __IO_DEV_DESC(x, sz)	{		\
 	.virtual	= IO_ADDRESS(x),	\
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 3db7782..b8adac9 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -16,9 +16,9 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
@@ -91,7 +91,7 @@ static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	smp_send_reschedule(cpu);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -155,8 +155,6 @@ static void __init ux500_smp_init_cpus(void)
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 875309a..aa2a78a 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -46,7 +46,7 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = {
 	{ },
 };
 
-static void __init ux500_timer_init(void)
+void __init ux500_timer_init(void)
 {
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
@@ -99,14 +99,3 @@ dt_fail:
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
-
-static void ux500_timer_reset(void)
-{
-	nmdk_clkevt_reset();
-	nmdk_clksrc_reset();
-}
-
-struct sys_timer ux500_timer = {
-	.init		= ux500_timer_init,
-	.resume		= ux500_timer_reset,
-};