3 files changed, 0 insertions, 125 deletions
diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h
deleted file mode 100644
index 5c47c97..0000000
--- a/arch/arm/mach-zynq/include/mach/uart.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uart.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UART_H__
-#define __MACH_UART_H__
-
-#define UART_CR_OFFSET		0x00  /* Control Register [8:0] */
-#define UART_SR_OFFSET		0x2C  /* Channel Status [11:0] */
-#define UART_FIFO_OFFSET	0x30  /* FIFO [15:0] or [7:0] */
-
-#define UART_SR_TXFULL		0x00000010	/* TX FIFO full */
-#define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h
deleted file mode 100644
index af4e844..0000000
--- a/arch/arm/mach-zynq/include/mach/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uncompress.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UNCOMPRESS_H__
-#define __MACH_UNCOMPRESS_H__
-
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <mach/zynq_soc.h>
-#include <mach/uart.h>
-
-void arch_decomp_setup(void)
-{
-}
-
-static inline void flush(void)
-{
-	/*
-	 * Wait while the FIFO is not empty
-	 */
-	while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
-		UART_SR_TXEMPTY))
-		cpu_relax();
-}
-
-#define arch_decomp_wdog()
-
-static void putc(char ch)
-{
-	/*
-	 * Wait for room in the FIFO, then write the char into the FIFO
-	 */
-	while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
-		UART_SR_TXFULL)
-		cpu_relax();
-
-	__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
-}
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
deleted file mode 100644
index 2995044..0000000
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/zynq_soc.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_XILINX_SOC_H__
-#define __MACH_XILINX_SOC_H__
-
-#include <asm/pgtable.h>
-
-#define PERIPHERAL_CLOCK_RATE		2500000
-
-/* Static peripheral mappings are mapped at the top of the vmalloc region.  The
- * early uart mapping causes intermediate problems/failure at certain
- * addresses, including the very top of the vmalloc region.  Map it at an
- * address that is known to work.
- */
-#define UART0_PHYS		0xE0000000
-#define UART1_PHYS		0xE0001000
-#define UART_SIZE		SZ_4K
-#define UART_VIRT		0xF0001000
-
-#define SCU_PERIPH_PHYS		0xF8F00000
-#define SCU_PERIPH_SIZE		SZ_8K
-#define SCU_PERIPH_VIRT		(VMALLOC_END - SCU_PERIPH_SIZE)
-
-#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
-# define LL_UART_PADDR		UART1_PHYS
-#else
-# define LL_UART_PADDR		UART0_PHYS
-#endif
-
-#define LL_UART_VADDR		UART_VIRT
-
-/* The following are intended for the devices that are mapped early */
-
-#define TTC0_BASE			IOMEM(TTC0_VIRT)
-#define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
-
-#endif