diff options
Diffstat (limited to 'arch/blackfin/mach-bf537/boards/pnav10.c')
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/pnav10.c | 169 |
1 files changed, 105 insertions, 64 deletions
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 4e0afda..812e8f9 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -17,7 +17,6 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> -#include <linux/usb/sl811.h> #include <linux/spi/ad7877.h> @@ -99,51 +98,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", @@ -221,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -284,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -362,25 +316,93 @@ static struct platform_device bfin_fb_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -446,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = { &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -472,7 +490,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) @@ -498,6 +521,24 @@ static int __init pnav_init(void) arch_initcall(pnav_init); +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); |