diff options
Diffstat (limited to 'drivers/acpi/acpica/evgpeinit.c')
| -rw-r--r-- | drivers/acpi/acpica/evgpeinit.c | 653 |
1 files changed, 653 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c new file mode 100644 index 0000000..3f6c2d2 --- /dev/null +++ b/drivers/acpi/acpica/evgpeinit.c @@ -0,0 +1,653 @@ +/****************************************************************************** + * + * Module Name: evgpeinit - System GPE initialization and update + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" +#include "acnamesp.h" +#include "acinterp.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evgpeinit") + +/******************************************************************************* + * + * FUNCTION: acpi_ev_gpe_initialize + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks + * + ******************************************************************************/ +acpi_status acpi_ev_gpe_initialize(void) +{ + u32 register_count0 = 0; + u32 register_count1 = 0; + u32 gpe_number_max = 0; + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_gpe_initialize); + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * Initialize the GPE Block(s) defined in the FADT + * + * Why the GPE register block lengths are divided by 2: From the ACPI + * Spec, section "General-Purpose Event Registers", we have: + * + * "Each register block contains two registers of equal length + * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the + * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN + * The length of the GPE1_STS and GPE1_EN registers is equal to + * half the GPE1_LEN. If a generic register block is not supported + * then its respective block pointer and block length values in the + * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need + * to be the same size." + */ + + /* + * Determine the maximum GPE number for this machine. + * + * Note: both GPE0 and GPE1 are optional, and either can exist without + * the other. + * + * If EITHER the register length OR the block address are zero, then that + * particular block is not supported. + */ + if (acpi_gbl_FADT.gpe0_block_length && + acpi_gbl_FADT.xgpe0_block.address) { + + /* GPE block 0 exists (has both length and address > 0) */ + + register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2); + + gpe_number_max = + (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1; + + /* Install GPE Block 0 */ + + status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, + &acpi_gbl_FADT.xgpe0_block, + register_count0, 0, + acpi_gbl_FADT.sci_interrupt, + &acpi_gbl_gpe_fadt_blocks[0]); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not create GPE Block 0")); + } + } + + if (acpi_gbl_FADT.gpe1_block_length && + acpi_gbl_FADT.xgpe1_block.address) { + + /* GPE block 1 exists (has both length and address > 0) */ + + register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2); + + /* Check for GPE0/GPE1 overlap (if both banks exist) */ + + if ((register_count0) && + (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { + ACPI_ERROR((AE_INFO, + "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " + "(GPE %u to %u) - Ignoring GPE1", + gpe_number_max, acpi_gbl_FADT.gpe1_base, + acpi_gbl_FADT.gpe1_base + + ((register_count1 * + ACPI_GPE_REGISTER_WIDTH) - 1))); + + /* Ignore GPE1 block by setting the register count to zero */ + + register_count1 = 0; + } else { + /* Install GPE Block 1 */ + + status = + acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, + &acpi_gbl_FADT.xgpe1_block, + register_count1, + acpi_gbl_FADT.gpe1_base, + acpi_gbl_FADT. + sci_interrupt, + &acpi_gbl_gpe_fadt_blocks + [1]); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not create GPE Block 1")); + } + + /* + * GPE0 and GPE1 do not have to be contiguous in the GPE number + * space. However, GPE0 always starts at GPE number zero. + */ + gpe_number_max = acpi_gbl_FADT.gpe1_base + + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1); + } + } + + /* Exit if there are no GPE registers */ + + if ((register_count0 + register_count1) == 0) { + + /* GPEs are not required by ACPI, this is OK */ + + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "There are no GPE blocks defined in the FADT\n")); + status = AE_OK; + goto cleanup; + } + + /* Check for Max GPE number out-of-range */ + + if (gpe_number_max > ACPI_GPE_MAX) { + ACPI_ERROR((AE_INFO, + "Maximum GPE number from FADT is too large: 0x%X", + gpe_number_max)); + status = AE_BAD_VALUE; + goto cleanup; + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_update_gpes + * + * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table + * + * RETURN: None + * + * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a + * result of a Load() or load_table() operation. If new GPE + * methods have been installed, register the new methods and + * enable and runtime GPEs that are associated with them. Also, + * run any newly loaded _PRW methods in order to discover any + * new CAN_WAKE GPEs. + * + ******************************************************************************/ + +void acpi_ev_update_gpes(acpi_owner_id table_owner_id) +{ + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + struct acpi_gpe_block_info *gpe_block; + struct acpi_gpe_walk_info walk_info; + acpi_status status = AE_OK; + u32 new_wake_gpe_count = 0; + + /* We will examine only _PRW/_Lxx/_Exx methods owned by this table */ + + walk_info.owner_id = table_owner_id; + walk_info.execute_by_owner_id = TRUE; + walk_info.count = 0; + + if (acpi_gbl_leave_wake_gpes_disabled) { + /* + * 1) Run any newly-loaded _PRW methods to find any GPEs that + * can now be marked as CAN_WAKE GPEs. Note: We must run the + * _PRW methods before we process the _Lxx/_Exx methods because + * we will enable all runtime GPEs associated with the new + * _Lxx/_Exx methods at the time we process those methods. + * + * Unlock interpreter so that we can run the _PRW methods. + */ + walk_info.gpe_block = NULL; + walk_info.gpe_device = NULL; + + acpi_ex_exit_interpreter(); + + status = + acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + ACPI_NS_WALK_NO_UNLOCK, + acpi_ev_match_prw_and_gpe, NULL, + &walk_info, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing _PRW methods")); + } + + acpi_ex_enter_interpreter(); + new_wake_gpe_count = walk_info.count; + } + + /* + * 2) Find any _Lxx/_Exx GPE methods that have just been loaded. + * + * Any GPEs that correspond to new _Lxx/_Exx methods and are not + * marked as CAN_WAKE are immediately enabled. + * + * Examine the namespace underneath each gpe_device within the + * gpe_block lists. + */ + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return; + } + + walk_info.count = 0; + walk_info.enable_this_gpe = TRUE; + + /* Walk the interrupt level descriptor list */ + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + + /* Walk all Gpe Blocks attached to this interrupt level */ + + gpe_block = gpe_xrupt_info->gpe_block_list_head; + while (gpe_block) { + walk_info.gpe_block = gpe_block; + walk_info.gpe_device = gpe_block->node; + + status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, + walk_info.gpe_device, + ACPI_UINT32_MAX, + ACPI_NS_WALK_NO_UNLOCK, + acpi_ev_match_gpe_method, + NULL, &walk_info, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While decoding _Lxx/_Exx methods")); + } + + gpe_block = gpe_block->next; + } + + gpe_xrupt_info = gpe_xrupt_info->next; + } + + if (walk_info.count || new_wake_gpe_count) { + ACPI_INFO((AE_INFO, + "Enabled %u new runtime GPEs, added %u new wakeup GPEs", + walk_info.count, new_wake_gpe_count)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_match_gpe_method + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a + * control method under the _GPE portion of the namespace. + * Extract the name and GPE type from the object, saving this + * information for quick lookup during GPE dispatch. Allows a + * per-owner_id evaluation if execute_by_owner_id is TRUE in the + * walk_info parameter block. + * + * The name of each GPE control method is of the form: + * "_Lxx" or "_Exx", where: + * L - means that the GPE is level triggered + * E - means that the GPE is edge triggered + * xx - is the GPE number [in HEX] + * + * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods + * with that owner. + * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE + * method is immediately enabled (Used for Load/load_table operators) + * + ******************************************************************************/ + +acpi_status +acpi_ev_match_gpe_method(acpi_handle obj_handle, + u32 level, void *context, void **return_value) +{ + struct acpi_namespace_node *method_node = + ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); + struct acpi_gpe_walk_info *walk_info = + ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_namespace_node *gpe_device; + acpi_status status; + u32 gpe_number; + char name[ACPI_NAME_SIZE + 1]; + u8 type; + + ACPI_FUNCTION_TRACE(ev_match_gpe_method); + + /* Check if requested owner_id matches this owner_id */ + + if ((walk_info->execute_by_owner_id) && + (method_node->owner_id != walk_info->owner_id)) { + return_ACPI_STATUS(AE_OK); + } + + /* + * Match and decode the _Lxx and _Exx GPE method names + * + * 1) Extract the method name and null terminate it + */ + ACPI_MOVE_32_TO_32(name, &method_node->name.integer); + name[ACPI_NAME_SIZE] = 0; + + /* 2) Name must begin with an underscore */ + + if (name[0] != '_') { + return_ACPI_STATUS(AE_OK); /* Ignore this method */ + } + + /* + * 3) Edge/Level determination is based on the 2nd character + * of the method name + * + * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is + * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set. + */ + switch (name[1]) { + case 'L': + type = ACPI_GPE_LEVEL_TRIGGERED; + break; + + case 'E': + type = ACPI_GPE_EDGE_TRIGGERED; + break; + + default: + /* Unknown method type, just ignore it */ + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Ignoring unknown GPE method type: %s " + "(name not of form _Lxx or _Exx)", name)); + return_ACPI_STATUS(AE_OK); + } + + /* 4) The last two characters of the name are the hex GPE Number */ + + gpe_number = ACPI_STRTOUL(&name[2], NULL, 16); + if (gpe_number == ACPI_UINT32_MAX) { + + /* Conversion failed; invalid method, just ignore it */ + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Could not extract GPE number from name: %s " + "(name is not of form _Lxx or _Exx)", name)); + return_ACPI_STATUS(AE_OK); + } + + /* Ensure that we have a valid GPE number for this GPE block */ + + gpe_event_info = + acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block); + if (!gpe_event_info) { + /* + * This gpe_number is not valid for this GPE block, just ignore it. + * However, it may be valid for a different GPE block, since GPE0 + * and GPE1 methods both appear under \_GPE. + */ + return_ACPI_STATUS(AE_OK); + } + + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_HANDLER) { + + /* If there is already a handler, ignore this GPE method */ + + return_ACPI_STATUS(AE_OK); + } + + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_METHOD) { + /* + * If there is already a method, ignore this method. But check + * for a type mismatch (if both the _Lxx AND _Exx exist) + */ + if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { + ACPI_ERROR((AE_INFO, + "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", + gpe_number, gpe_number, gpe_number)); + } + return_ACPI_STATUS(AE_OK); + } + + /* + * Add the GPE information from above to the gpe_event_info block for + * use during dispatch of this GPE. + */ + gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); + gpe_event_info->dispatch.method_node = method_node; + + /* + * Enable this GPE if requested. This only happens when during the + * execution of a Load or load_table operator. We have found a new + * GPE method and want to immediately enable the GPE if it is a + * runtime GPE. + */ + if (walk_info->enable_this_gpe) { + + /* Ignore GPEs that can wake the system */ + + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) || + !acpi_gbl_leave_wake_gpes_disabled) { + walk_info->count++; + gpe_device = walk_info->gpe_device; + + if (gpe_device == acpi_gbl_fadt_gpe_device) { + gpe_device = NULL; + } + + status = acpi_enable_gpe(gpe_device, gpe_number, + ACPI_GPE_TYPE_RUNTIME); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not enable GPE 0x%02X", + gpe_number)); + } + } + } + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Registered GPE method %s as GPE number 0x%.2X\n", + name, gpe_number)); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_match_prw_and_gpe + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status. NOTE: We ignore errors so that the _PRW walk is + * not aborted on a single _PRW failure. + * + * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a + * Device. Run the _PRW method. If present, extract the GPE + * number and mark the GPE as a CAN_WAKE GPE. Allows a + * per-owner_id execution if execute_by_owner_id is TRUE in the + * walk_info parameter block. + * + * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that + * owner. + * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise, + * we only execute _PRWs that refer to the input gpe_device. + * + ******************************************************************************/ + +acpi_status +acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, + u32 level, void *context, void **return_value) +{ + struct acpi_gpe_walk_info *walk_info = + ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); + struct acpi_namespace_node *gpe_device; + struct acpi_gpe_block_info *gpe_block; + struct acpi_namespace_node *target_gpe_device; + struct acpi_namespace_node *prw_node; + struct acpi_gpe_event_info *gpe_event_info; + union acpi_operand_object *pkg_desc; + union acpi_operand_object *obj_desc; + u32 gpe_number; + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe); + + /* Check for a _PRW method under this device */ + + status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW, + ACPI_NS_NO_UPSEARCH, &prw_node); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(AE_OK); + } + + /* Check if requested owner_id matches this owner_id */ + + if ((walk_info->execute_by_owner_id) && + (prw_node->owner_id != walk_info->owner_id)) { + return_ACPI_STATUS(AE_OK); + } + + /* Execute the _PRW */ + + status = acpi_ut_evaluate_object(prw_node, NULL, + ACPI_BTYPE_PACKAGE, &pkg_desc); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(AE_OK); + } + + /* The returned _PRW package must have at least two elements */ + + if (pkg_desc->package.count < 2) { + goto cleanup; + } + + /* Extract pointers from the input context */ + + gpe_device = walk_info->gpe_device; + gpe_block = walk_info->gpe_block; + + /* + * The _PRW object must return a package, we are only interested + * in the first element + */ + obj_desc = pkg_desc->package.elements[0]; + + if (obj_desc->common.type == ACPI_TYPE_INTEGER) { + + /* Use FADT-defined GPE device (from definition of _PRW) */ + + target_gpe_device = NULL; + if (gpe_device) { + target_gpe_device = acpi_gbl_fadt_gpe_device; + } + + /* Integer is the GPE number in the FADT described GPE blocks */ + + gpe_number = (u32)obj_desc->integer.value; + } else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { + + /* Package contains a GPE reference and GPE number within a GPE block */ + + if ((obj_desc->package.count < 2) || + ((obj_desc->package.elements[0])->common.type != + ACPI_TYPE_LOCAL_REFERENCE) || + ((obj_desc->package.elements[1])->common.type != + ACPI_TYPE_INTEGER)) { + goto cleanup; + } + + /* Get GPE block reference and decode */ + + target_gpe_device = + obj_desc->package.elements[0]->reference.node; + gpe_number = (u32)obj_desc->package.elements[1]->integer.value; + } else { + /* Unknown type, just ignore it */ + + goto cleanup; + } + + /* Get the gpe_event_info for this GPE */ + + if (gpe_device) { + /* + * Is this GPE within this block? + * + * TRUE if and only if these conditions are true: + * 1) The GPE devices match. + * 2) The GPE index(number) is within the range of the Gpe Block + * associated with the GPE device. + */ + if (gpe_device != target_gpe_device) { + goto cleanup; + } + + gpe_event_info = + acpi_ev_low_get_gpe_info(gpe_number, gpe_block); + } else { + /* gpe_device is NULL, just match the target_device and gpe_number */ + + gpe_event_info = + acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number); + } + + if (gpe_event_info) { + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + + /* This GPE can wake the system */ + + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + walk_info->count++; + } + } + + cleanup: + acpi_ut_remove_reference(pkg_desc); + return_ACPI_STATUS(AE_OK); +} |