diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/acpi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/acpi/bus.c | 22 | ||||
| -rw-r--r-- | drivers/acpi/glue.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/pci_slot.c | 368 | ||||
| -rw-r--r-- | drivers/acpi/power.c | 138 | ||||
| -rw-r--r-- | drivers/acpi/scan.c | 42 | ||||
| -rw-r--r-- | drivers/acpi/sleep/main.c | 301 | ||||
| -rw-r--r-- | drivers/acpi/sleep/wakeup.c | 13 |
9 files changed, 706 insertions, 190 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index bba8673..735f5ea 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -336,6 +336,15 @@ config ACPI_EC the battery and thermal drivers. If you are compiling for a mobile system, say Y. +config ACPI_PCI_SLOT + tristate "PCI slot detection driver" + default n + help + This driver will attempt to discover all PCI slots in your system, + and creates entries in /sys/bus/pci/slots/. This feature can + help you correlate PCI bus addresses with the physical geography + of your slots. If you are unsure, say N. + config ACPI_POWER bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 4efbe598..52a4cd4 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_BAY) += bay.o obj-$(CONFIG_ACPI_VIDEO) += video.o obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o +obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_POWER) += power.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index afb3438..ccae305 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -295,6 +295,28 @@ int acpi_bus_set_power(acpi_handle handle, int state) EXPORT_SYMBOL(acpi_bus_set_power); +bool acpi_bus_power_manageable(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->flags.power_manageable; +} + +EXPORT_SYMBOL(acpi_bus_power_manageable); + +bool acpi_bus_can_wakeup(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->wakeup.flags.valid; +} + +EXPORT_SYMBOL(acpi_bus_can_wakeup); + /* -------------------------------------------------------------------------- Event Management -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 6d18ca3..0f2dd81 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -166,6 +166,8 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); + if (acpi_dev->wakeup.flags.valid) + device_set_wakeup_capable(dev, true); } return 0; diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c new file mode 100644 index 0000000..b9ab030 --- /dev/null +++ b/drivers/acpi/pci_slot.c @@ -0,0 +1,368 @@ +/* + * pci_slot.c - ACPI PCI Slot Driver + * + * The code here is heavily leveraged from the acpiphp module. + * Thanks to Matthew Wilcox <matthew@wil.cx> for much guidance. + * Thanks to Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> for code + * review and fixes. + * + * Copyright (C) 2007 Alex Chiang <achiang@hp.com> + * Copyright (C) 2007 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/acpi.h> +#include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> + +static int debug; +static int check_sta_before_sun; + +#define DRIVER_VERSION "0.1" +#define DRIVER_AUTHOR "Alex Chiang <achiang@hp.com>" +#define DRIVER_DESC "ACPI PCI Slot Detection Driver" +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); +module_param(debug, bool, 0644); + +#define _COMPONENT ACPI_PCI_COMPONENT +ACPI_MODULE_NAME("pci_slot"); + +#define MY_NAME "pci_slot" +#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg) +#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg) +#define dbg(format, arg...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "%s: " format, \ + MY_NAME , ## arg); \ + } while (0) + +#define SLOT_NAME_SIZE 20 /* Inspired by #define in acpiphp.h */ + +struct acpi_pci_slot { + acpi_handle root_handle; /* handle of the root bridge */ + struct pci_slot *pci_slot; /* corresponding pci_slot */ + struct list_head list; /* node in the list of slots */ +}; + +static int acpi_pci_slot_add(acpi_handle handle); +static void acpi_pci_slot_remove(acpi_handle handle); + +static LIST_HEAD(slot_list); +static DEFINE_MUTEX(slot_list_lock); +static struct acpi_pci_driver acpi_pci_slot_driver = { + .add = acpi_pci_slot_add, + .remove = acpi_pci_slot_remove, +}; + +static int +check_slot(acpi_handle handle, int *device, unsigned long *sun) +{ + int retval = 0; + unsigned long adr, sta; + acpi_status status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + dbg("Checking slot on path: %s\n", (char *)buffer.pointer); + + if (check_sta_before_sun) { + /* If SxFy doesn't have _STA, we just assume it's there */ + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) { + retval = -1; + goto out; + } + } + + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) { + dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer); + retval = -1; + goto out; + } + + *device = (adr >> 16) & 0xffff; + + /* No _SUN == not a slot == bail */ + status = acpi_evaluate_integer(handle, "_SUN", NULL, sun); + if (ACPI_FAILURE(status)) { + dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer); + retval = -1; + goto out; + } + +out: + kfree(buffer.pointer); + return retval; +} + +struct callback_args { + acpi_walk_callback user_function; /* only for walk_p2p_bridge */ + struct pci_bus *pci_bus; + acpi_handle root_handle; +}; + +/* + * register_slot + * + * Called once for each SxFy object in the namespace. Don't worry about + * calling pci_create_slot multiple times for the same pci_bus:device, + * since each subsequent call simply bumps the refcount on the pci_slot. + * + * The number of calls to pci_destroy_slot from unregister_slot is + * symmetrical. + */ +static acpi_status +register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int device; + unsigned long sun; + char name[SLOT_NAME_SIZE]; + struct acpi_pci_slot *slot; + struct pci_slot *pci_slot; + struct callback_args *parent_context = context; + struct pci_bus *pci_bus = parent_context->pci_bus; + + if (check_slot(handle, &device, &sun)) + return AE_OK; + + slot = kmalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) { + err("%s: cannot allocate memory\n", __func__); + return AE_OK; + } + + snprintf(name, sizeof(name), "%u", (u32)sun); + pci_slot = pci_create_slot(pci_bus, device, name); + if (IS_ERR(pci_slot)) { + err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); + kfree(slot); + } + + slot->root_handle = parent_context->root_handle; + slot->pci_slot = pci_slot; + INIT_LIST_HEAD(&slot->list); + mutex_lock(&slot_list_lock); + list_add(&slot->list, &slot_list); + mutex_unlock(&slot_list_lock); + + dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n", + pci_slot, pci_bus->number, device, name); + + return AE_OK; +} + +/* + * walk_p2p_bridge - discover and walk p2p bridges + * @handle: points to an acpi_pci_root + * @context: p2p_bridge_context pointer + * + * Note that when we call ourselves recursively, we pass a different + * value of pci_bus in the child_context. + */ +static acpi_status +walk_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int device, function; + unsigned long adr; + acpi_status status; + acpi_handle dummy_handle; + acpi_walk_callback user_function; + + struct pci_dev *dev; + struct pci_bus *pci_bus; + struct callback_args child_context; + struct callback_args *parent_context = context; + + pci_bus = parent_context->pci_bus; + user_function = parent_context->user_function; + + status = acpi_get_handle(handle, "_ADR", &dummy_handle); + if (ACPI_FAILURE(status)) + return AE_OK; + + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) + return AE_OK; + + device = (adr >> 16) & 0xffff; + function = adr & 0xffff; + + dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function)); + if (!dev || !dev->subordinate) + goto out; + + child_context.pci_bus = dev->subordinate; + child_context.user_function = user_function; + child_context.root_handle = parent_context->root_handle; + + dbg("p2p bridge walk, pci_bus = %x\n", dev->subordinate->number); + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + user_function, &child_context, NULL); + if (ACPI_FAILURE(status)) + goto out; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + walk_p2p_bridge, &child_context, NULL); +out: + pci_dev_put(dev); + return AE_OK; +} + +/* + * walk_root_bridge - generic root bridge walker + * @handle: points to an acpi_pci_root + * @user_function: user callback for slot objects + * + * Call user_function for all objects underneath this root bridge. + * Walk p2p bridges underneath us and call user_function on those too. + */ +static int +walk_root_bridge(acpi_handle handle, acpi_walk_callback user_function) +{ + int seg, bus; + unsigned long tmp; + acpi_status status; + acpi_handle dummy_handle; + struct pci_bus *pci_bus; + struct callback_args context; + + /* If the bridge doesn't have _STA, we assume it is always there */ + status = acpi_get_handle(handle, "_STA", &dummy_handle); + if (ACPI_SUCCESS(status)) { + status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp); + if (ACPI_FAILURE(status)) { + info("%s: _STA evaluation failure\n", __func__); + return 0; + } + if ((tmp & ACPI_STA_DEVICE_FUNCTIONING) == 0) + /* don't register this object */ + return 0; + } + + status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp); + seg = ACPI_SUCCESS(status) ? tmp : 0; + + status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp); + bus = ACPI_SUCCESS(status) ? tmp : 0; + + pci_bus = pci_find_bus(seg, bus); + if (!pci_bus) + return 0; + + context.pci_bus = pci_bus; + context.user_function = user_function; + context.root_handle = handle; + + dbg("root bridge walk, pci_bus = %x\n", pci_bus->number); + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + user_function, &context, NULL); + if (ACPI_FAILURE(status)) + return status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + walk_p2p_bridge, &context, NULL); + if (ACPI_FAILURE(status)) + err("%s: walk_p2p_bridge failure - %d\n", __func__, status); + + return status; +} + +/* + * acpi_pci_slot_add + * @handle: points to an acpi_pci_root + */ +static int +acpi_pci_slot_add(acpi_handle handle) +{ + acpi_status status; + + status = walk_root_bridge(handle, register_slot); + if (ACPI_FAILURE(status)) + err("%s: register_slot failure - %d\n", __func__, status); + + return status; +} + +/* + * acpi_pci_slot_remove + * @handle: points to an acpi_pci_root + */ +static void +acpi_pci_slot_remove(acpi_handle handle) +{ + struct acpi_pci_slot *slot, *tmp; + + mutex_lock(&slot_list_lock); + list_for_each_entry_safe(slot, tmp, &slot_list, list) { + if (slot->root_handle == handle) { + list_del(&slot->list); + pci_destroy_slot(slot->pci_slot); + kfree(slot); + } + } + mutex_unlock(&slot_list_lock); +} + +static int do_sta_before_sun(const struct dmi_system_id *d) +{ + info("%s detected: will evaluate _STA before calling _SUN\n", d->ident); + check_sta_before_sun = 1; + return 0; +} + +static struct dmi_system_id acpi_pci_slot_dmi_table[] __initdata = { + /* + * Fujitsu Primequest machines will return 1023 to indicate an + * error if the _SUN method is evaluated on SxFy objects that + * are not present (as indicated by _STA), so for those machines, + * we want to check _STA before evaluating _SUN. + */ + { + .callback = do_sta_before_sun, + .ident = "Fujitsu PRIMEQUEST", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "FUJITSU LIMITED"), + DMI_MATCH(DMI_BIOS_VERSION, "PRIMEQUEST"), + }, + }, + {} +}; + +static int __init +acpi_pci_slot_init(void) +{ + dmi_check_system(acpi_pci_slot_dmi_table); + acpi_pci_register_driver(&acpi_pci_slot_driver); + return 0; +} + +static void __exit +acpi_pci_slot_exit(void) +{ + acpi_pci_unregister_driver(&acpi_pci_slot_driver); +} + +module_init(acpi_pci_slot_init); +module_exit(acpi_pci_slot_exit); diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 81e4f08..4ab21cb 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -292,69 +292,135 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) return 0; } +/** + * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in + * ACPI 3.0) _PSW (Power State Wake) + * @dev: Device to handle. + * @enable: 0 - disable, 1 - enable the wake capabilities of the device. + * @sleep_state: Target sleep state of the system. + * @dev_state: Target power state of the device. + * + * Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present. On failure reset the device's + * wakeup.flags.valid flag. + * + * RETURN VALUE: + * 0 if either _DSW or _PSW has been successfully executed + * 0 if neither _DSW nor _PSW has been found + * -ENODEV if the execution of either _DSW or _PSW has failed + */ +int acpi_device_sleep_wake(struct acpi_device *dev, + int enable, int sleep_state, int dev_state) +{ + union acpi_object in_arg[3]; + struct acpi_object_list arg_list = { 3, in_arg }; + acpi_status status = AE_OK; + + /* + * Try to execute _DSW first. + * + * Three agruments are needed for the _DSW object: + * Argument 0: enable/disable the wake capabilities + * Argument 1: target system state + * Argument 2: target device state + * When _DSW object is called to disable the wake capabilities, maybe + * the first argument is filled. The values of the other two agruments + * are meaningless. + */ + in_arg[0].type = ACPI_TYPE_INTEGER; + in_arg[0].integer.value = enable; + in_arg[1].type = ACPI_TYPE_INTEGER; + in_arg[1].integer.value = sleep_state; + in_arg[2].type = ACPI_TYPE_INTEGER; + in_arg[2].integer.value = dev_state; + status = acpi_evaluate_object(dev->handle, "_DSW", &arg_list, NULL); + if (ACPI_SUCCESS(status)) { + return 0; + } else if (status != AE_NOT_FOUND) { + printk(KERN_ERR PREFIX "_DSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + /* Execute _PSW */ + arg_list.count = 1; + in_arg[0].integer.value = enable; + status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); + if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { + printk(KERN_ERR PREFIX "_PSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + return 0; +} + /* * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229): * 1. Power on the power resources required for the wakeup device - * 2. Enable _PSW (power state wake) for the device if present + * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present */ -int acpi_enable_wakeup_device_power(struct acpi_device *dev) +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; - int i; - int ret = 0; + int i, err; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; + + /* + * Do not execute the code below twice in a row without calling + * acpi_disable_wakeup_device_power() in between for the same device + */ + if (dev->wakeup.flags.prepared) + return 0; - arg.integer.value = 1; /* Open power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { - ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); + int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - ret = -1; - } + /* + * Passing 3 as the third argument below means the device may be placed + * in arbitrary power state afterwards. + */ + err = acpi_device_sleep_wake(dev, 1, sleep_state, 3); + if (!err) + dev->wakeup.flags.prepared = 1; - return ret; + return err; } /* * Shutdown a wakeup device, counterpart of above method - * 1. Disable _PSW (power state wake) + * 1. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present * 2. Shutdown down the power resources */ int acpi_disable_wakeup_device_power(struct acpi_device *dev) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; - int i; - int ret = 0; - + int i, ret; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; - arg.integer.value = 0; - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - return -1; - } + /* + * Do not execute the code below twice in a row without calling + * acpi_enable_wakeup_device_power() in between for the same device + */ + if (!dev->wakeup.flags.prepared) + return 0; + + dev->wakeup.flags.prepared = 0; + + ret = acpi_device_sleep_wake(dev, 0, 0, 0); + if (ret) + return ret; /* Close power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { @@ -362,7 +428,7 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5b049cd..f3132aa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -703,9 +703,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) acpi_status status = 0; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *package = NULL; - union acpi_object in_arg[3]; - struct acpi_object_list arg_list = { 3, in_arg }; - acpi_status psw_status = AE_OK; + int psw_error; struct acpi_device_id button_device_ids[] = { {"PNP0C0D", 0}, @@ -737,39 +735,11 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) * So it is necessary to call _DSW object first. Only when it is not * present will the _PSW object used. */ - /* - * Three agruments are needed for the _DSW object. - * Argument 0: enable/disable the wake capabilities - * When _DSW object is called to disable the wake capabilities, maybe - * the first argument is filled. The value of the other two agruments - * is meaningless. - */ - in_arg[0].type = ACPI_TYPE_INTEGER; - in_arg[0].integer.value = 0; - in_arg[1].type = ACPI_TYPE_INTEGER; - in_arg[1].integer.value = 0; - in_arg[2].type = ACPI_TYPE_INTEGER; - in_arg[2].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_DSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in evaluate _DSW\n")); - /* - * When the _DSW object is not present, OSPM will call _PSW object. - */ - if (psw_status == AE_NOT_FOUND) { - /* - * Only one agruments is required for the _PSW object. - * agrument 0: enable/disable the wake capabilities - */ - arg_list.count = 1; - in_arg[0].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_PSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in " - "evaluate _PSW\n")); - } + psw_error = acpi_device_sleep_wake(device, 0, 0, 0); + if (psw_error) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "error in _DSW or _PSW evaluation\n")); + /* Power button, Lid switch always enable wakeup */ if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 244e352..0489a7d 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,10 +24,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; -#ifdef CONFIG_PM_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -#endif - static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP @@ -49,9 +45,96 @@ static int acpi_sleep_prepare(u32 acpi_state) return 0; } -#ifdef CONFIG_SUSPEND -static struct platform_suspend_ops acpi_suspend_ops; +#ifdef CONFIG_PM_SLEEP +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/* + * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the + * user to request that behavior by using the 'acpi_old_suspend_ordering' + * kernel command line option that causes the following variable to be set. + */ +static bool old_suspend_ordering; + +void __init acpi_old_suspend_ordering(void) +{ + old_suspend_ordering = true; +} + +/** + * acpi_pm_disable_gpes - Disable the GPEs. + */ +static int acpi_pm_disable_gpes(void) +{ + acpi_hw_disable_all_gpes(); + return 0; +} + +/** + * __acpi_pm_prepare - Prepare the platform to enter the target state. + * + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. + */ +static int __acpi_pm_prepare(void) +{ + int error = acpi_sleep_prepare(acpi_target_sleep_state); + + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + return error; +} + +/** + * acpi_pm_prepare - Prepare the platform to enter the target sleep + * state and disable the GPEs. + */ +static int acpi_pm_prepare(void) +{ + int error = __acpi_pm_prepare(); + + if (!error) + acpi_hw_disable_all_gpes(); + return error; +} + +/** + * acpi_pm_finish - Instruct the platform to leave a sleep state. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static void acpi_pm_finish(void) +{ + u32 acpi_state = acpi_target_sleep_state; + + if (acpi_state == ACPI_STATE_S0) + return; + + printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", + acpi_state); + acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); + + /* reset firmware waking vector */ + acpi_set_firmware_waking_vector((acpi_physical_address) 0); + + acpi_target_sleep_state = ACPI_STATE_S0; +} + +/** + * acpi_pm_end - Finish up suspend sequence. + */ +static void acpi_pm_end(void) +{ + /* + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. + */ + acpi_target_sleep_state = ACPI_STATE_S0; +} +#endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_SUSPEND extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -65,7 +148,6 @@ static u32 acpi_suspend_states[] = { * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. */ - static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; @@ -82,25 +164,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state) } /** - * acpi_suspend_prepare - Do preliminary suspend work. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ - -static int acpi_suspend_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - -/** * acpi_suspend_enter - Actually enter a sleep state. * @pm_state: ignored * @@ -108,7 +171,6 @@ static int acpi_suspend_prepare(void) * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ - static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; @@ -165,39 +227,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -/** - * acpi_suspend_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static void acpi_suspend_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_suspend_end - Finish up suspend sequence. - */ - -static void acpi_suspend_end(void) -{ - /* - * This is necessary in case acpi_suspend_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} - static int acpi_suspend_state_valid(suspend_state_t pm_state) { u32 acpi_state; @@ -217,10 +246,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, - .prepare = acpi_suspend_prepare, + .prepare = acpi_pm_prepare, .enter = acpi_suspend_enter, - .finish = acpi_suspend_finish, - .end = acpi_suspend_end, + .finish = acpi_pm_finish, + .end = acpi_pm_end, +}; + +/** + * acpi_suspend_begin_old - Set the target system sleep state to the + * state associated with given @pm_state, if supported, and + * execute the _PTS control method. This function is used if the + * pre-ACPI 2.0 suspend ordering has been requested. + */ +static int acpi_suspend_begin_old(suspend_state_t pm_state) +{ + int error = acpi_suspend_begin(pm_state); + + if (!error) + error = __acpi_pm_prepare(); + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_suspend_ops acpi_suspend_ops_old = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin_old, + .prepare = acpi_pm_disable_gpes, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, + .recover = acpi_pm_finish, }; #endif /* CONFIG_SUSPEND */ @@ -228,22 +286,9 @@ static struct platform_suspend_ops acpi_suspend_ops = { static int acpi_hibernation_begin(void) { acpi_target_sleep_state = ACPI_STATE_S4; - return 0; } -static int acpi_hibernation_prepare(void) -{ - int error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; @@ -273,52 +318,55 @@ static void acpi_hibernation_leave(void) acpi_leave_sleep_state_prep(ACPI_STATE_S4); } -static void acpi_hibernation_finish(void) +static void acpi_pm_enable_gpes(void) { - acpi_disable_wakeup_device(ACPI_STATE_S4); - acpi_leave_sleep_state(ACPI_STATE_S4); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; + acpi_hw_enable_all_runtime_gpes(); } -static void acpi_hibernation_end(void) -{ - /* - * This is necessary in case acpi_hibernation_finish() is not called - * during a failing transition to the sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} +static struct platform_hibernation_ops acpi_hibernation_ops = { + .begin = acpi_hibernation_begin, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_prepare, + .finish = acpi_pm_finish, + .prepare = acpi_pm_prepare, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, +}; -static int acpi_hibernation_pre_restore(void) +/** + * acpi_hibernation_begin_old - Set the target system sleep state to + * ACPI_STATE_S4 and execute the _PTS control method. This + * function is used if the pre-ACPI 2.0 suspend ordering has been + * requested. + */ +static int acpi_hibernation_begin_old(void) { - acpi_status status; - - status = acpi_hw_disable_all_gpes(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} + int error = acpi_sleep_prepare(ACPI_STATE_S4); -static void acpi_hibernation_restore_cleanup(void) -{ - acpi_hw_enable_all_runtime_gpes(); + if (!error) + acpi_target_sleep_state = ACPI_STATE_S4; + return error; } -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_hibernation_end, - .pre_snapshot = acpi_hibernation_prepare, - .finish = acpi_hibernation_finish, - .prepare = acpi_hibernation_prepare, +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_hibernation_ops acpi_hibernation_ops_old = { + .begin = acpi_hibernation_begin_old, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_disable_gpes, + .finish = acpi_pm_finish, + .prepare = acpi_pm_disable_gpes, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_hibernation_pre_restore, - .restore_cleanup = acpi_hibernation_restore_cleanup, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, + .recover = acpi_pm_finish, }; -#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_HIBERNATION */ int acpi_suspend(u32 acpi_state) { @@ -419,6 +467,31 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) *d_min_p = d_min; return d_max; } + +/** + * acpi_pm_device_sleep_wake - enable or disable the system wake-up + * capability of given device + * @dev: device to handle + * @enable: 'true' - enable, 'false' - disable the wake-up capability + */ +int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + acpi_handle handle; + struct acpi_device *adev; + + if (!device_may_wakeup(dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_DEBUG "ACPI handle has no context!\n"); + return -ENODEV; + } + + return enable ? + acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : + acpi_disable_wakeup_device_power(adev); +} #endif static void acpi_power_off_prepare(void) @@ -460,13 +533,15 @@ int __init acpi_sleep_init(void) } } - suspend_set_ops(&acpi_suspend_ops); + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); #endif #ifdef CONFIG_HIBERNATION status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); if (ACPI_SUCCESS(status)) { - hibernation_set_ops(&acpi_hibernation_ops); + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; printk(" S4"); } diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index ed8e41b..38655eb 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -42,7 +42,7 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) continue; spin_unlock(&acpi_device_lock); - acpi_enable_wakeup_device_power(dev); + acpi_enable_wakeup_device_power(dev, sleep_state); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -66,13 +66,15 @@ void acpi_enable_wakeup_device(u8 sleep_state) list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); + if (!dev->wakeup.flags.valid) continue; + /* If users want to disable run-wake GPE, * we only disable it for wake and leave it for runtime */ - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); /* set_gpe_type will disable GPE, leave it like that */ @@ -110,8 +112,9 @@ void acpi_disable_wakeup_device(u8 sleep_state) if (!dev->wakeup.flags.valid) continue; - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, |