diff options
Diffstat (limited to 'drivers/hwmon/hwmon-vid.c')
-rw-r--r-- | drivers/hwmon/hwmon-vid.c | 159 |
1 files changed, 78 insertions, 81 deletions
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 932da8a..9f26400 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -40,7 +40,7 @@ * available at http://developer.intel.com/. * * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, - * http://support.amd.com/us/Processor_TechDocs/26094.PDF + * http://support.amd.com/us/Processor_TechDocs/26094.PDF * Table 74. VID Code Voltages * This corresponds to an arbitrary VRM code of 24 in the functions below. * These CPU models (K8 revision <= E) have 5 VID pins. See also: @@ -83,27 +83,27 @@ int vid_from_reg(int val, u8 vrm) { int vid; - switch(vrm) { + switch (vrm) { - case 100: /* VRD 10.0 */ + case 100: /* VRD 10.0 */ /* compute in uV, round to mV */ val &= 0x3f; - if((val & 0x1f) == 0x1f) + if ((val & 0x1f) == 0x1f) return 0; - if((val & 0x1f) <= 0x09 || val == 0x0a) + if ((val & 0x1f) <= 0x09 || val == 0x0a) vid = 1087500 - (val & 0x1f) * 25000; else vid = 1862500 - (val & 0x1f) * 25000; - if(val & 0x20) + if (val & 0x20) vid -= 12500; - return((vid + 500) / 1000); + return (vid + 500) / 1000; case 110: /* Intel Conroe */ /* compute in uV, round to mV */ val &= 0xff; if (val < 0x02 || val > 0xb2) return 0; - return((1600000 - (val - 2) * 6250 + 500) / 1000); + return (1600000 - (val - 2) * 6250 + 500) / 1000; case 24: /* Athlon64 & Opteron */ val &= 0x1f; @@ -118,38 +118,38 @@ int vid_from_reg(int val, u8 vrm) case 91: /* VRM 9.1 */ case 90: /* VRM 9.0 */ val &= 0x1f; - return(val == 0x1f ? 0 : - 1850 - val * 25); + return val == 0x1f ? 0 : + 1850 - val * 25; case 85: /* VRM 8.5 */ val &= 0x1f; - return((val & 0x10 ? 25 : 0) + + return (val & 0x10 ? 25 : 0) + ((val & 0x0f) > 0x04 ? 2050 : 1250) - - ((val & 0x0f) * 50)); + ((val & 0x0f) * 50); case 84: /* VRM 8.4 */ val &= 0x0f; /* fall through */ case 82: /* VRM 8.2 */ val &= 0x1f; - return(val == 0x1f ? 0 : + return val == 0x1f ? 0 : val & 0x10 ? 5100 - (val) * 100 : - 2050 - (val) * 50); + 2050 - (val) * 50; case 17: /* Intel IMVP-II */ val &= 0x1f; - return(val & 0x10 ? 975 - (val & 0xF) * 25 : - 1750 - val * 50); + return val & 0x10 ? 975 - (val & 0xF) * 25 : + 1750 - val * 50; case 13: case 131: val &= 0x3f; /* Exception for Eden ULV 500 MHz */ if (vrm == 131 && val == 0x3f) val++; - return(1708 - val * 16); + return 1708 - val * 16; case 14: /* Intel Core */ /* compute in uV, round to mV */ val &= 0x7f; - return(val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000); + return val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000; default: /* report 0 for unknown */ if (vrm) pr_warn("Requested unsupported VRM version (%u)\n", @@ -157,7 +157,7 @@ int vid_from_reg(int val, u8 vrm) return 0; } } - +EXPORT_SYMBOL(vid_from_reg); /* * After this point is the code to automatically determine which @@ -166,9 +166,10 @@ int vid_from_reg(int val, u8 vrm) struct vrm_model { u8 vendor; - u8 eff_family; - u8 eff_model; - u8 eff_stepping; + u8 family; + u8 model_from; + u8 model_to; + u8 stepping_to; u8 vrm_type; }; @@ -177,42 +178,52 @@ struct vrm_model { #ifdef CONFIG_X86 /* - * The stepping parameter is highest acceptable stepping for current line. + * The stepping_to parameter is highest acceptable stepping for current line. * The model match must be exact for 4-bit values. For model values 0x10 * and above (extended model), all models below the parameter will match. */ static struct vrm_model vrm_models[] = { - {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */ - {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ - /* In theory, all NPT family 0Fh processors have 6 VID pins and should - thus use vrm 25, however in practice not all mainboards route the - 6th VID pin because it is never needed. So we use the 5 VID pin - variant (vrm 24) for the models which exist today. */ - {X86_VENDOR_AMD, 0xF, 0x7F, ANY, 24}, /* NPT family 0Fh */ - {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* future fam. 0Fh */ - {X86_VENDOR_AMD, 0x10, ANY, ANY, 25}, /* NPT family 10h */ - - {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */ - {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */ - {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */ - {X86_VENDOR_INTEL, 0x6, 0xE, ANY, 14}, /* Intel Core (65 nm) */ - {X86_VENDOR_INTEL, 0x6, 0xF, ANY, 110}, /* Intel Conroe */ - {X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */ - {X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */ - {X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */ - {X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */ - {X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */ - - {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */ - {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */ - {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */ - {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ - {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ - {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7-M, C7, Eden (Esther) */ - {X86_VENDOR_CENTAUR, 0x6, 0xD, ANY, 134}, /* C7-D, C7-M, C7, Eden (Esther) */ - - {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */ + {X86_VENDOR_AMD, 0x6, 0x0, ANY, ANY, 90}, /* Athlon Duron etc */ + {X86_VENDOR_AMD, 0xF, 0x0, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ + /* + * In theory, all NPT family 0Fh processors have 6 VID pins and should + * thus use vrm 25, however in practice not all mainboards route the + * 6th VID pin because it is never needed. So we use the 5 VID pin + * variant (vrm 24) for the models which exist today. + */ + {X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24}, /* NPT family 0Fh */ + {X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25}, /* future fam. 0Fh */ + {X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25}, /* NPT family 10h */ + + {X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82}, /* Pentium Pro, + * Pentium II, Xeon, + * Mobile Pentium, + * Celeron */ + {X86_VENDOR_INTEL, 0x6, 0x7, 0x7, ANY, 84}, /* Pentium III, Xeon */ + {X86_VENDOR_INTEL, 0x6, 0x8, 0x8, ANY, 82}, /* Pentium III, Xeon */ + {X86_VENDOR_INTEL, 0x6, 0x9, 0x9, ANY, 13}, /* Pentium M (130 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xA, 0xA, ANY, 82}, /* Pentium III Xeon */ + {X86_VENDOR_INTEL, 0x6, 0xB, 0xB, ANY, 85}, /* Tualatin */ + {X86_VENDOR_INTEL, 0x6, 0xD, 0xD, ANY, 13}, /* Pentium M (90 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xE, 0xE, ANY, 14}, /* Intel Core (65 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xF, ANY, ANY, 110}, /* Intel Conroe and + * later */ + {X86_VENDOR_INTEL, 0xF, 0x0, 0x0, ANY, 90}, /* P4 */ + {X86_VENDOR_INTEL, 0xF, 0x1, 0x1, ANY, 90}, /* P4 Willamette */ + {X86_VENDOR_INTEL, 0xF, 0x2, 0x2, ANY, 90}, /* P4 Northwood */ + {X86_VENDOR_INTEL, 0xF, 0x3, ANY, ANY, 100}, /* Prescott and above + * assume VRD 10 */ + + {X86_VENDOR_CENTAUR, 0x6, 0x7, 0x7, ANY, 85}, /* Eden ESP/Ezra */ + {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x8, 0x7, 85}, /* Ezra T */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, 0x7, 85}, /* Nehemiah */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, ANY, 17}, /* C3-M, Eden-N */ + {X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, 0x7, 0}, /* No information */ + {X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, ANY, 13}, /* C7-M, C7, + * Eden (Esther) */ + {X86_VENDOR_CENTAUR, 0x6, 0xD, 0xD, ANY, 134}, /* C7-D, C7-M, C7, + * Eden (Esther) */ }; /* @@ -248,20 +259,17 @@ static u8 get_via_model_d_vrm(void) } } -static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor) +static u8 find_vrm(u8 family, u8 model, u8 stepping, u8 vendor) { - int i = 0; - - while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) { - if (vrm_models[i].vendor==vendor) - if ((vrm_models[i].eff_family==eff_family) - && ((vrm_models[i].eff_model==eff_model) || - (vrm_models[i].eff_model >= 0x10 && - eff_model <= vrm_models[i].eff_model) || - (vrm_models[i].eff_model==ANY)) && - (eff_stepping <= vrm_models[i].eff_stepping)) - return vrm_models[i].vrm_type; - i++; + int i; + + for (i = 0; i < ARRAY_SIZE(vrm_models); i++) { + if (vendor == vrm_models[i].vendor && + family == vrm_models[i].family && + model >= vrm_models[i].model_from && + model <= vrm_models[i].model_to && + stepping <= vrm_models[i].stepping_to) + return vrm_models[i].vrm_type; } return 0; @@ -270,21 +278,12 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor) u8 vid_which_vrm(void) { struct cpuinfo_x86 *c = &cpu_data(0); - u32 eax; - u8 eff_family, eff_model, eff_stepping, vrm_ret; + u8 vrm_ret; if (c->x86 < 6) /* Any CPU with family lower than 6 */ - return 0; /* doesn't have VID and/or CPUID */ - - eax = cpuid_eax(1); - eff_family = ((eax & 0x00000F00)>>8); - eff_model = ((eax & 0x000000F0)>>4); - eff_stepping = eax & 0xF; - if (eff_family == 0xF) { /* use extended model & family */ - eff_family += ((eax & 0x00F00000)>>20); - eff_model += ((eax & 0x000F0000)>>16)<<4; - } - vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor); + return 0; /* doesn't have VID */ + + vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor); if (vrm_ret == 134) vrm_ret = get_via_model_d_vrm(); if (vrm_ret == 0) @@ -300,8 +299,6 @@ u8 vid_which_vrm(void) return 0; } #endif - -EXPORT_SYMBOL(vid_from_reg); EXPORT_SYMBOL(vid_which_vrm); MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); |