diff options
Diffstat (limited to 'drivers/net/chelsio/espi.c')
| -rw-r--r-- | drivers/net/chelsio/espi.c | 168 |
1 files changed, 64 insertions, 104 deletions
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 7ec2dc7..2306425 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * Ethernet SPI functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -63,15 +63,16 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, { int busy, attempts = TRICN_CMD_ATTEMPTS; - t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | - V_REGISTER_OFFSET(reg_offset) | - V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | - V_BUNDLE_ADDR(bundle_addr) | - V_SPI4_COMMAND(TRICN_CMD_WRITE)); - t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); do { - busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; } while (busy && --attempts); if (busy) @@ -99,12 +100,12 @@ static int tricn_init(adapter_t *adapter) /* 1 */ timeout=1000; do { - stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + stat = readl(adapter->regs + A_ESPI_RX_RESET); is_ready = (stat & 0x4); timeout--; udelay(5); } while (!is_ready || (timeout==0)); - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); if (timeout==0) { CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); @@ -127,14 +128,14 @@ static int tricn_init(adapter_t *adapter) for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); /* 3 */ - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + writel(0x3, adapter->regs + A_ESPI_RX_RESET); return 0; } void t1_espi_intr_enable(struct peespi *espi) { - u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); /* * Cannot enable ESPI interrupts on T1B because HW asserts the @@ -144,28 +145,28 @@ void t1_espi_intr_enable(struct peespi *espi) * cannot be cleared (HW bug). */ enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } void t1_espi_intr_clear(struct peespi *espi) { - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); - t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); } void t1_espi_intr_disable(struct peespi *espi) { - u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } int t1_espi_intr_handler(struct peespi *espi) { u32 cnt; - u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP4ERR) espi->intr_cnt.DIP4_err++; @@ -184,7 +185,7 @@ int t1_espi_intr_handler(struct peespi *espi) * Must read the error count to clear the interrupt * that it causes. */ - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -193,68 +194,28 @@ int t1_espi_intr_handler(struct peespi *espi) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); return 0; } -static void espi_setup_for_pm3393(adapter_t *adapter) +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) { - u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); + return &espi->intr_cnt; } -static void espi_setup_for_vsc7321(adapter_t *adapter) +static void espi_setup_for_pm3393(adapter_t *adapter) { u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); -} - -/* - * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. - */ -static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) -{ - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); - if (nports == 4) { - if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0xf00); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x3c0); - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x7ff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x1ff); - } - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x1fff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x7ff); - } - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); } /* T2 Init part -- */ @@ -263,43 +224,42 @@ static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) /* 3. Init TriCN Hard Macro */ int t1_espi_init(struct peespi *espi, int mac_type, int nports) { + u32 cnt; + u32 status_enable_extra = 0; adapter_t *adapter = espi->adapter; - u32 cnt; u32 status, burstval = 0x800100; /* Disable ESPI training. MACs that can handle it enable it below. */ - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + writel(0, adapter->regs + A_ESPI_TRAIN); if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - V_OUT_OF_SYNC_COUNT(4) | - V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); if (nports == 4) { /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ burstval = 0x200040; } } - t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); - if (mac_type == CHBT_MAC_PM3393) + switch (mac_type) { + case CHBT_MAC_PM3393: espi_setup_for_pm3393(adapter); - else if (mac_type == CHBT_MAC_VSC7321) - espi_setup_for_vsc7321(adapter); - else if (mac_type == CHBT_MAC_IXF1010) { - status_enable_extra = F_INTEL1010MODE; - espi_setup_for_ixf1010(adapter, nports); - } else + break; + default: return -1; + } /* * Make sure any pending interrupts from the SPI are * Cleared before enabling the interrupt. */ - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); - status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP2PARITYERR) { - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -308,10 +268,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); - t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, - status_enable_extra | F_RXSTATUSENABLE); + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); if (is_T2(adapter)) { tricn_init(adapter); @@ -319,10 +279,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) * Always position the control at the 1st port egress IN * (sop,eop) counter to reduce PIOs for T/N210 workaround. */ - espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) & ~MON_MASK) | (F_MONITORED_DIRECTION | F_MONITORED_INTERFACE); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_lock_init(&espi->lock); } @@ -354,15 +314,16 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) spin_lock(&espi->lock); espi->misc_ctrl = (val & ~MON_MASK) | (espi->misc_ctrl & MON_MASK); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_unlock(&espi->lock); } u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) { - struct peespi *espi = adapter->espi; u32 sel; + struct peespi *espi = adapter->espi; + if (!is_T2(adapter)) return 0; sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); @@ -373,14 +334,13 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) else spin_lock(&espi->lock); if ((sel != (espi->misc_ctrl & MON_MASK))) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - ((espi->misc_ctrl & ~MON_MASK) | sel)); - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - espi->misc_ctrl); + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); } else - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); spin_unlock(&espi->lock); return sel; } |