diff options
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 72 |
1 files changed, 35 insertions, 37 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d266510..b81c423 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k2" +#define DRV_VERSION "0.3.3.3-k6" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -1115,6 +1115,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) writel(0, adapter->hw.hw_addr + rx_ring->tail); } +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number @@ -1139,7 +1147,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- For packet buffer work-around on @@ -1205,7 +1213,7 @@ static irqreturn_t e1000_intr(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- @@ -2592,8 +2600,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); - spin_lock_init(&adapter->stats_lock); - set_bit(__E1000_DOWN, &adapter->state); return 0; @@ -2912,6 +2918,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + /* * Need to wait a few seconds after link up to get diagnostic information from * the phy @@ -2919,7 +2940,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); + schedule_work(&adapter->update_phy_task); } /** @@ -2930,10 +2951,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF /* * Prevent stats update while adapter is being reset, or if the pci @@ -2944,14 +2961,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if (pci_channel_offline(pdev)) return; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* - * these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); @@ -3022,21 +3031,10 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } /** @@ -3048,10 +3046,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; int ret_val; - unsigned long irq_flags; - - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { @@ -3082,8 +3076,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } static void e1000_print_link_info(struct e1000_adapter *adapter) @@ -4467,6 +4459,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->bd_number = cards_found++; + e1000e_check_options(adapter); + /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) @@ -4482,6 +4476,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_hw_init; + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; @@ -4572,8 +4570,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - - e1000e_check_options(adapter); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; |