diff options
Diffstat (limited to 'drivers/net/wan/sdla_x25.c')
| -rw-r--r-- | drivers/net/wan/sdla_x25.c | 5497 |
1 files changed, 0 insertions, 5497 deletions
diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c deleted file mode 100644 index 63f846d..0000000 --- a/drivers/net/wan/sdla_x25.c +++ /dev/null @@ -1,5497 +0,0 @@ -/***************************************************************************** -* sdla_x25.c WANPIPE(tm) Multiprotocol WAN Link Driver. X.25 module. -* -* Author: Nenad Corbic <ncorbic@sangoma.com> -* -* Copyright: (c) 1995-2001 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Apr 03, 2001 Nenad Corbic o Fixed the rx_skb=NULL bug in x25 in rx_intr(). -* Dec 26, 2000 Nenad Corbic o Added a new polling routine, that uses -* a kernel timer (more efficient). -* Dec 25, 2000 Nenad Corbic o Updated for 2.4.X kernel -* Jul 26, 2000 Nenad Corbic o Increased the local packet buffering -* for API to 4096+header_size. -* Jul 17, 2000 Nenad Corbic o Fixed the x25 startup bug. Enable -* communications only after all interfaces -* come up. HIGH SVC/PVC is used to calculate -* the number of channels. -* Enable protocol only after all interfaces -* are enabled. -* Jul 10, 2000 Nenad Corbic o Fixed the M_BIT bug. -* Apr 25, 2000 Nenad Corbic o Pass Modem messages to the API. -* Disable idle timeout in X25 API. -* Apr 14, 2000 Nenad Corbic o Fixed: Large LCN number support. -* Maximum LCN number is 4095. -* Maximum number of X25 channels is 255. -* Apr 06, 2000 Nenad Corbic o Added SMP Support. -* Mar 29, 2000 Nenad Corbic o Added support for S514 PCI Card -* Mar 23, 2000 Nenad Corbic o Improved task queue, BH handling. -* Mar 14, 2000 Nenad Corbic o Updated Protocol Violation handling -* routines. Bug Fix. -* Mar 10, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery. -* Mar 09, 2000 Nenad Corbic o Fixed the auto HDLC bug. -* Mar 08, 2000 Nenad Corbic o Fixed LAPB HDLC startup problems. -* Application must bring the link up -* before tx/rx, and bring the -* link down on close(). -* Mar 06, 2000 Nenad Corbic o Added an option for logging call setup -* information. -* Feb 29, 2000 Nenad Corbic o Added support for LAPB HDLC API -* Feb 25, 2000 Nenad Corbic o Fixed the modem failure handling. -* No Modem OOB message will be passed -* to the user. -* Feb 21, 2000 Nenad Corbic o Added Xpipemon Debug Support -* Dec 30, 1999 Nenad Corbic o Socket based X25API -* Sep 17, 1998 Jaspreet Singh o Updates for 2.2.X kernel -* Mar 15, 1998 Alan Cox o 2.1.x porting -* Dec 19, 1997 Jaspreet Singh o Added multi-channel IPX support -* Nov 27, 1997 Jaspreet Singh o Added protection against enabling of irqs -* when they are disabled. -* Nov 17, 1997 Farhan Thawar o Added IPX support -* o Changed if_send() to now buffer packets when -* the board is busy -* o Removed queueing of packets via the polling -* routing -* o Changed if_send() critical flags to properly -* handle race conditions -* Nov 06, 1997 Farhan Thawar o Added support for SVC timeouts -* o Changed PVC encapsulation to ETH_P_IP -* Jul 21, 1997 Jaspreet Singh o Fixed freeing up of buffers using kfree() -* when packets are received. -* Mar 11, 1997 Farhan Thawar Version 3.1.1 -* o added support for V35 -* o changed if_send() to return 0 if -* wandev.critical() is true -* o free socket buffer in if_send() if -* returning 0 -* o added support for single '@' address to -* accept all incoming calls -* o fixed bug in set_chan_state() to disconnect -* Jan 15, 1997 Gene Kozin Version 3.1.0 -* o implemented exec() entry point -* Jan 07, 1997 Gene Kozin Initial version. -*****************************************************************************/ - -/*====================================================== - * Includes - *=====================================================*/ - -#include <linux/module.h> -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/ctype.h> -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/wanrouter.h> /* WAN router definitions */ -#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ -#include <linux/workqueue.h> -#include <linux/jiffies.h> /* time_after() macro */ -#include <asm/byteorder.h> /* htons(), etc. */ -#include <asm/atomic.h> -#include <linux/delay.h> /* Experimental delay */ - -#include <asm/uaccess.h> - -#include <linux/if.h> -#include <linux/if_arp.h> -#include <linux/sdla_x25.h> /* X.25 firmware API definitions */ -#include <linux/if_wanpipe_common.h> -#include <linux/if_wanpipe.h> - - -/*====================================================== - * Defines & Macros - *=====================================================*/ - - -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ -#define MAX_CMD_RETRY 10 /* max number of firmware retries */ - -#define X25_CHAN_MTU 4096 /* unfragmented logical channel MTU */ -#define X25_HRDHDR_SZ 7 /* max encapsulation header size */ -#define X25_CONCT_TMOUT (90*HZ) /* link connection timeout */ -#define X25_RECON_TMOUT (10*HZ) /* link connection timeout */ -#define CONNECT_TIMEOUT (90*HZ) /* link connection timeout */ -#define HOLD_DOWN_TIME (30*HZ) /* link hold down time */ -#define MAX_BH_BUFF 10 -#define M_BIT 0x01 - -//#define PRINT_DEBUG 1 -#ifdef PRINT_DEBUG -#define DBG_PRINTK(format, a...) printk(format, ## a) -#else -#define DBG_PRINTK(format, a...) -#endif - -#define TMR_INT_ENABLED_POLL_ACTIVE 0x01 -#define TMR_INT_ENABLED_POLL_CONNECT_ON 0x02 -#define TMR_INT_ENABLED_POLL_CONNECT_OFF 0x04 -#define TMR_INT_ENABLED_POLL_DISCONNECT 0x08 -#define TMR_INT_ENABLED_CMD_EXEC 0x10 -#define TMR_INT_ENABLED_UPDATE 0x20 -#define TMR_INT_ENABLED_UDP_PKT 0x40 - -#define MAX_X25_ADDR_SIZE 16 -#define MAX_X25_DATA_SIZE 129 -#define MAX_X25_FACL_SIZE 110 - -#define TRY_CMD_AGAIN 2 -#define DELAY_RESULT 1 -#define RETURN_RESULT 0 - -#define DCD(x) (x & 0x03 ? "HIGH" : "LOW") -#define CTS(x) (x & 0x05 ? "HIGH" : "LOW") - - -/* Driver will not write log messages about - * modem status if defined.*/ -#define MODEM_NOT_LOG 1 - -/*==================================================== - * For IPXWAN - *===================================================*/ - -#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b))) - - -/*==================================================== - * MEMORY DEBUGGING FUNCTION - *==================================================== - -#define KMEM_SAFETYZONE 8 - -static void * dbg_kmalloc(unsigned int size, int prio, int line) { - int i = 0; - void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio); - char * c1 = v; - c1 += sizeof(unsigned int); - *((unsigned int *)v) = size; - - for (i = 0; i < KMEM_SAFETYZONE; i++) { - c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D'; - c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F'; - c1 += 8; - } - c1 += size; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G'; - c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L'; - c1 += 8; - } - v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8; - printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v); - return v; -} -static void dbg_kfree(void * v, int line) { - unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8)); - unsigned int size = *sp; - char * c1 = ((char *)v) - KMEM_SAFETYZONE*8; - int i = 0; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D' - || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') { - printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v); - printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, - c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); - } - c1 += 8; - } - c1 += size; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G' - || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L' - ) { - printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v); - printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, - c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); - } - c1 += 8; - } - printk(KERN_INFO "line %d kfree(%p)\n",line,v); - v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8); - kfree(v); -} - -#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__) -#define kfree(x) dbg_kfree(x,__LINE__) - -==============================================================*/ - - - -/*=============================================== - * Data Structures - *===============================================*/ - - -/*======================================================== - * Name: x25_channel - * - * Purpose: To hold private informaton for each - * logical channel. - * - * Rationale: Per-channel debugging is possible if each - * channel has its own private area. - * - * Assumptions: - * - * Description: This is an extention of the struct net_device - * we create for each network interface to keep - * the rest of X.25 channel-specific data. - * - * Construct: Typedef - */ -typedef struct x25_channel -{ - wanpipe_common_t common; /* common area for x25api and socket */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - unsigned tx_pkt_size; - unsigned short protocol; /* ethertype, 0 - multiplexed */ - char drop_sequence; /* mark sequence for dropping */ - unsigned long state_tick; /* time of the last state change */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned long i_timeout_sofar; /* # of sec's we've been idle */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned long tick_counter; /* counter for transmit time out */ - char devtint; /* Weather we should dev_tint() */ - struct sk_buff* rx_skb; /* receive socket buffer */ - struct sk_buff* tx_skb; /* transmit socket buffer */ - - bh_data_t *bh_head; /* Circular buffer for x25api_bh */ - unsigned long tq_working; - volatile int bh_write; - volatile int bh_read; - atomic_t bh_buff_used; - - sdla_t* card; /* -> owner */ - struct net_device *dev; /* -> bound devce */ - - int ch_idx; - unsigned char enable_IPX; - unsigned long network_number; - struct net_device_stats ifstats; /* interface statistics */ - unsigned short transmit_length; - unsigned short tx_offset; - char transmit_buffer[X25_CHAN_MTU+sizeof(x25api_hdr_t)]; - - if_send_stat_t if_send_stat; - rx_intr_stat_t rx_intr_stat; - pipe_mgmt_stat_t pipe_mgmt_stat; - - unsigned long router_start_time; /* Router start time in seconds */ - unsigned long router_up_time; - -} x25_channel_t; - -/* FIXME Take this out */ - -#ifdef NEX_OLD_CALL_INFO -typedef struct x25_call_info -{ - char dest[17]; PACKED;/* ASCIIZ destination address */ - char src[17]; PACKED;/* ASCIIZ source address */ - char nuser; PACKED;/* number of user data bytes */ - unsigned char user[127]; PACKED;/* user data */ - char nfacil; PACKED;/* number of facilities */ - struct - { - unsigned char code; PACKED; - unsigned char parm; PACKED; - } facil[64]; /* facilities */ -} x25_call_info_t; -#else -typedef struct x25_call_info -{ - char dest[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ destination address */ - char src[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ source address */ - unsigned char nuser PACKED; - unsigned char user[MAX_X25_DATA_SIZE] PACKED;/* user data */ - unsigned char nfacil PACKED; - unsigned char facil[MAX_X25_FACL_SIZE] PACKED; - unsigned short lcn PACKED; -} x25_call_info_t; -#endif - - - -/*=============================================== - * Private Function Prototypes - *==============================================*/ - - -/*================================================= - * WAN link driver entry points. These are - * called by the WAN router module. - */ -static int update(struct wan_device* wandev); -static int new_if(struct wan_device* wandev, struct net_device* dev, - wanif_conf_t* conf); -static int del_if(struct wan_device* wandev, struct net_device* dev); -static void disable_comm (sdla_t* card); -static void disable_comm_shutdown(sdla_t *card); - - - -/*================================================= - * WANPIPE-specific entry points - */ -static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data); -static void x25api_bh(struct net_device *dev); -static int x25api_bh_cleanup(struct net_device *dev); -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); - - -/*================================================= - * Network device interface - */ -static int if_init(struct net_device* dev); -static int if_open(struct net_device* dev); -static int if_close(struct net_device* dev); -static int if_header(struct sk_buff* skb, struct net_device* dev, - unsigned short type, void* daddr, void* saddr, unsigned len); -static int if_rebuild_hdr (struct sk_buff* skb); -static int if_send(struct sk_buff* skb, struct net_device* dev); -static struct net_device_stats *if_stats(struct net_device* dev); - -static void if_tx_timeout(struct net_device *dev); - -/*================================================= - * Interrupt handlers - */ -static void wpx_isr (sdla_t *); -static void rx_intr (sdla_t *); -static void tx_intr (sdla_t *); -static void status_intr (sdla_t *); -static void event_intr (sdla_t *); -static void spur_intr (sdla_t *); -static void timer_intr (sdla_t *); - -static int tx_intr_send(sdla_t *card, struct net_device *dev); -static struct net_device *move_dev_to_next(sdla_t *card, - struct net_device *dev); - -/*================================================= - * Background polling routines - */ -static void wpx_poll (sdla_t* card); -static void poll_disconnected (sdla_t* card); -static void poll_connecting (sdla_t* card); -static void poll_active (sdla_t* card); -static void trigger_x25_poll(sdla_t *card); -static void x25_timer_routine(unsigned long data); - - - -/*================================================= - * X.25 firmware interface functions - */ -static int x25_get_version (sdla_t* card, char* str); -static int x25_configure (sdla_t* card, TX25Config* conf); -static int hdlc_configure (sdla_t* card, TX25Config* conf); -static int set_hdlc_level (sdla_t* card); -static int x25_get_err_stats (sdla_t* card); -static int x25_get_stats (sdla_t* card); -static int x25_set_intr_mode (sdla_t* card, int mode); -static int x25_close_hdlc (sdla_t* card); -static int x25_open_hdlc (sdla_t* card); -static int x25_setup_hdlc (sdla_t* card); -static int x25_set_dtr (sdla_t* card, int dtr); -static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan); -static int x25_place_call (sdla_t* card, x25_channel_t* chan); -static int x25_accept_call (sdla_t* card, int lcn, int qdm); -static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn); -static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf); -static int x25_fetch_events (sdla_t* card); -static int x25_error (sdla_t* card, int err, int cmd, int lcn); - -/*================================================= - * X.25 asynchronous event handlers - */ -static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); -static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); -static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); -static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); -static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); - - -/*================================================= - * Miscellaneous functions - */ -static int connect (sdla_t* card); -static int disconnect (sdla_t* card); -static struct net_device* get_dev_by_lcn(struct wan_device* wandev, - unsigned lcn); -static int chan_connect(struct net_device* dev); -static int chan_disc(struct net_device* dev); -static void set_chan_state(struct net_device* dev, int state); -static int chan_send(struct net_device *dev, void* buff, unsigned data_len, - unsigned char tx_intr); -static unsigned char bps_to_speed_code (unsigned long bps); -static unsigned int dec_to_uint (unsigned char* str, int len); -static unsigned int hex_to_uint (unsigned char*, int); -static void parse_call_info (unsigned char*, x25_call_info_t*); -static struct net_device *find_channel(sdla_t *card, unsigned lcn); -static void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn); -static void setup_for_delayed_transmit(struct net_device *dev, - void *buf, unsigned len); - - -/*================================================= - * X25 API Functions - */ -static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, - struct sk_buff **); -static void timer_intr_exec(sdla_t *, unsigned char); -static int execute_delayed_cmd(sdla_t *card, struct net_device *dev, - mbox_cmd_t *usr_cmd, char bad_cmd); -static int api_incoming_call (sdla_t*, TX25Mbox *, int); -static int alloc_and_init_skb_buf (sdla_t *,struct sk_buff **, int); -static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, - TX25Mbox* mbox); -static int clear_confirm_event (sdla_t *, TX25Mbox*); -static void send_oob_msg (sdla_t *card, struct net_device *dev, TX25Mbox *mbox); -static int timer_intr_cmd_exec(sdla_t *card); -static void api_oob_event (sdla_t *card,TX25Mbox *mbox); -static int check_bad_command(sdla_t *card, struct net_device *dev); -static int channel_disconnect(sdla_t* card, struct net_device *dev); -static void hdlc_link_down (sdla_t*); - -/*================================================= - * XPIPEMON Functions - */ -static int process_udp_mgmt_pkt(sdla_t *); -static int udp_pkt_type( struct sk_buff *, sdla_t*); -static int reply_udp( unsigned char *, unsigned int); -static void init_x25_channel_struct( x25_channel_t *); -static void init_global_statistics( sdla_t *); -static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t *card, - struct net_device *dev, - struct sk_buff *skb, int lcn); -static unsigned short calc_checksum (char *, int); - - - -/*================================================= - * IPX functions - */ -static void switch_net_numbers(unsigned char *, unsigned long, unsigned char); -static int handle_IPXWAN(unsigned char *, char *, unsigned char , - unsigned long , unsigned short ); - -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); - -static void S508_S514_lock(sdla_t *, unsigned long *); -static void S508_S514_unlock(sdla_t *, unsigned long *); - - -/*================================================= - * Global Variables - *=================================================*/ - - - -/*================================================= - * Public Functions - *=================================================*/ - - - - -/*=================================================================== - * wpx_init: X.25 Protocol Initialization routine. - * - * Purpose: To initialize the protocol/firmware. - * - * Rationale: This function is called by setup() function, in - * sdlamain.c, to dynamically setup the x25 protocol. - * This is the first protocol specific function, which - * executes once on startup. - * - * Description: This procedure initializes the x25 firmware and - * sets up the mailbox, transmit and receive buffer - * pointers. It also initializes all debugging structures - * and sets up the X25 environment. - * - * Sets up hardware options defined by user in [wanpipe#] - * section of wanpipe#.conf configuration file. - * - * At this point adapter is completely initialized - * and X.25 firmware is running. - * o read firmware version (to make sure it's alive) - * o configure adapter - * o initialize protocol-specific fields of the - * adapter data space. - * - * Called by: setup() function in sdlamain.c - * - * Assumptions: None - * - * Warnings: None - * - * Return: 0 o.k. - * < 0 failure. - */ - -int wpx_init (sdla_t* card, wandev_conf_t* conf) -{ - union{ - char str[80]; - TX25Config cfg; - } u; - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_X25){ - printk(KERN_INFO "%s: invalid configuration ID %u!\n", - card->devname, conf->config_id) - ; - return -EINVAL; - } - - /* Initialize protocol-specific fields */ - card->mbox = (void*)(card->hw.dpmbase + X25_MBOX_OFFS); - card->rxmb = (void*)(card->hw.dpmbase + X25_RXMBOX_OFFS); - card->flags = (void*)(card->hw.dpmbase + X25_STATUS_OFFS); - - /* Initialize for S514 Card */ - if(card->hw.type == SDLA_S514) { - card->mbox += X25_MB_VECTOR; - card->flags += X25_MB_VECTOR; - card->rxmb += X25_MB_VECTOR; - } - - - /* Read firmware version. Note that when adapter initializes, it - * clears the mailbox, so it may appear that the first command was - * executed successfully when in fact it was merely erased. To work - * around this, we execute the first command twice. - */ - if (x25_get_version(card, NULL) || x25_get_version(card, u.str)) - return -EIO; - - - /* X25 firmware can run ether in X25 or LAPB HDLC mode. - * Check the user defined option and configure accordingly */ - if (conf->u.x25.LAPB_hdlc_only == WANOPT_YES){ - if (set_hdlc_level(card) != CMD_OK){ - return -EIO; - }else{ - printk(KERN_INFO "%s: running LAP_B HDLC firmware v%s\n", - card->devname, u.str); - } - card->u.x.LAPB_hdlc = 1; - }else{ - printk(KERN_INFO "%s: running X.25 firmware v%s\n", - card->devname, u.str); - card->u.x.LAPB_hdlc = 0; - } - - /* Configure adapter. Here we set resonable defaults, then parse - * device configuration structure and set configuration options. - * Most configuration options are verified and corrected (if - * necessary) since we can't rely on the adapter to do so. - */ - memset(&u.cfg, 0, sizeof(u.cfg)); - u.cfg.t1 = 3; - u.cfg.n2 = 10; - u.cfg.autoHdlc = 1; /* automatic HDLC connection */ - u.cfg.hdlcWindow = 7; - u.cfg.pktWindow = 2; - u.cfg.station = 1; /* DTE */ - u.cfg.options = 0x0090; /* disable D-bit pragmatics */ - u.cfg.ccittCompat = 1988; - u.cfg.t10t20 = 30; - u.cfg.t11t21 = 30; - u.cfg.t12t22 = 30; - u.cfg.t13t23 = 30; - u.cfg.t16t26 = 30; - u.cfg.t28 = 30; - u.cfg.r10r20 = 5; - u.cfg.r12r22 = 5; - u.cfg.r13r23 = 5; - u.cfg.responseOpt = 1; /* RR's after every packet */ - - if (card->u.x.LAPB_hdlc){ - u.cfg.hdlcMTU = 1027; - } - - if (conf->u.x25.x25_conf_opt){ - u.cfg.options = conf->u.x25.x25_conf_opt; - } - - if (conf->clocking != WANOPT_EXTERNAL) - u.cfg.baudRate = bps_to_speed_code(conf->bps); - - if (conf->station != WANOPT_DTE){ - u.cfg.station = 0; /* DCE mode */ - } - - if (conf->interface != WANOPT_RS232 ){ - u.cfg.hdlcOptions |= 0x80; /* V35 mode */ - } - - /* adjust MTU */ - if (!conf->mtu || (conf->mtu >= 1024)) - card->wandev.mtu = 1024; - else if (conf->mtu >= 512) - card->wandev.mtu = 512; - else if (conf->mtu >= 256) - card->wandev.mtu = 256; - else if (conf->mtu >= 128) - card->wandev.mtu = 128; - else - card->wandev.mtu = 64; - - u.cfg.defPktSize = u.cfg.pktMTU = card->wandev.mtu; - - if (conf->u.x25.hi_pvc){ - card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, MAX_LCN_NUM); - card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); - } - - if (conf->u.x25.hi_svc){ - card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, MAX_LCN_NUM); - card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); - } - - /* Figure out the total number of channels to configure */ - card->u.x.num_of_ch = 0; - if (card->u.x.hi_svc != 0){ - card->u.x.num_of_ch = (card->u.x.hi_svc - card->u.x.lo_svc) + 1; - } - if (card->u.x.hi_pvc != 0){ - card->u.x.num_of_ch += (card->u.x.hi_pvc - card->u.x.lo_pvc) + 1; - } - - if (card->u.x.num_of_ch == 0){ - printk(KERN_INFO "%s: ERROR, Minimum number of PVC/SVC channels is 1 !\n" - "%s: Please set the Lowest/Highest PVC/SVC values !\n", - card->devname,card->devname); - return -ECHRNG; - } - - u.cfg.loPVC = card->u.x.lo_pvc; - u.cfg.hiPVC = card->u.x.hi_pvc; - u.cfg.loTwoWaySVC = card->u.x.lo_svc; - u.cfg.hiTwoWaySVC = card->u.x.hi_svc; - - if (conf->u.x25.hdlc_window) - u.cfg.hdlcWindow = min_t(unsigned int, conf->u.x25.hdlc_window, 7); - if (conf->u.x25.pkt_window) - u.cfg.pktWindow = min_t(unsigned int, conf->u.x25.pkt_window, 7); - - if (conf->u.x25.t1) - u.cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); - if (conf->u.x25.t2) - u.cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 29); - if (conf->u.x25.t4) - u.cfg.t4 = min_t(unsigned int, conf->u.x25.t4, 240); - if (conf->u.x25.n2) - u.cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); - - if (conf->u.x25.t10_t20) - u.cfg.t10t20 = min_t(unsigned int, conf->u.x25.t10_t20,255); - if (conf->u.x25.t11_t21) - u.cfg.t11t21 = min_t(unsigned int, conf->u.x25.t11_t21,255); - if (conf->u.x25.t12_t22) - u.cfg.t12t22 = min_t(unsigned int, conf->u.x25.t12_t22,255); - if (conf->u.x25.t13_t23) - u.cfg.t13t23 = min_t(unsigned int, conf->u.x25.t13_t23,255); - if (conf->u.x25.t16_t26) - u.cfg.t16t26 = min_t(unsigned int, conf->u.x25.t16_t26, 255); - if (conf->u.x25.t28) - u.cfg.t28 = min_t(unsigned int, conf->u.x25.t28, 255); - - if (conf->u.x25.r10_r20) - u.cfg.r10r20 = min_t(unsigned int, conf->u.x25.r10_r20,250); - if (conf->u.x25.r12_r22) - u.cfg.r12r22 = min_t(unsigned int, conf->u.x25.r12_r22,250); - if (conf->u.x25.r13_r23) - u.cfg.r13r23 = min_t(unsigned int, conf->u.x25.r13_r23,250); - - - if (conf->u.x25.ccitt_compat) - u.cfg.ccittCompat = conf->u.x25.ccitt_compat; - - /* initialize adapter */ - if (card->u.x.LAPB_hdlc){ - if (hdlc_configure(card, &u.cfg) != CMD_OK) - return -EIO; - }else{ - if (x25_configure(card, &u.cfg) != CMD_OK) - return -EIO; - } - - if ((x25_close_hdlc(card) != CMD_OK) || /* close HDLC link */ - (x25_set_dtr(card, 0) != CMD_OK)) /* drop DTR */ - return -EIO; - - /* Initialize protocol-specific fields of adapter data space */ - card->wandev.bps = conf->bps; - card->wandev.interface = conf->interface; - card->wandev.clocking = conf->clocking; - card->wandev.station = conf->station; - card->isr = &wpx_isr; - card->poll = NULL; //&wpx_poll; - card->disable_comm = &disable_comm; - card->exec = &wpx_exec; - card->wandev.update = &update; - card->wandev.new_if = &new_if; - card->wandev.del_if = &del_if; - - /* WARNING: This function cannot exit with an error - * after the change of state */ - card->wandev.state = WAN_DISCONNECTED; - - card->wandev.enable_tx_int = 0; - card->irq_dis_if_send_count = 0; - card->irq_dis_poll_count = 0; - card->u.x.tx_dev = NULL; - card->u.x.no_dev = 0; - - - /* Configure for S514 PCI Card */ - if (card->hw.type == SDLA_S514) { - card->u.x.hdlc_buf_status = - (volatile unsigned char *) - (card->hw.dpmbase + X25_MB_VECTOR+ X25_MISC_HDLC_BITS); - }else{ - card->u.x.hdlc_buf_status = - (volatile unsigned char *)(card->hw.dpmbase + X25_MISC_HDLC_BITS); - } - - card->u.x.poll_device=NULL; - card->wandev.udp_port = conf->udp_port; - - /* Enable or disable call setup logging */ - if (conf->u.x25.logging == WANOPT_YES){ - printk(KERN_INFO "%s: Enabling Call Logging.\n", - card->devname); - card->u.x.logging = 1; - }else{ - card->u.x.logging = 0; - } - - /* Enable or disable modem status reporting */ - if (conf->u.x25.oob_on_modem == WANOPT_YES){ - printk(KERN_INFO "%s: Enabling OOB on Modem change.\n", - card->devname); - card->u.x.oob_on_modem = 1; - }else{ - card->u.x.oob_on_modem = 0; - } - - init_global_statistics(card); - - INIT_WORK(&card->u.x.x25_poll_work, (void *)wpx_poll, card); - - init_timer(&card->u.x.x25_timer); - card->u.x.x25_timer.data = (unsigned long)card; - card->u.x.x25_timer.function = x25_timer_routine; - - return 0; -} - -/*========================================================= - * WAN Device Driver Entry Points - *========================================================*/ - -/*============================================================ - * Name: update(), Update device status & statistics. - * - * Purpose: To provide debugging and statitical - * information to the /proc file system. - * /proc/net/wanrouter/wanpipe# - * - * Rationale: The /proc file system is used to collect - * information about the kernel and drivers. - * Using the /proc file system the user - * can see exactly what the sangoma drivers are - * doing. And in what state they are in. - * - * Description: Collect all driver statistical information - * and pass it to the top laywer. - * - * Since we have to execute a debugging command, - * to obtain firmware statitics, we trigger a - * UPDATE function within the timer interrtup. - * We wait until the timer update is complete. - * Once complete return the appropriate return - * code to indicate that the update was successful. - * - * Called by: device_stat() in wanmain.c - * - * Assumptions: - * - * Warnings: This function will degrade the performance - * of the router, since it uses the mailbox. - * - * Return: 0 OK - * <0 Failed (or busy). - */ - -static int update(struct wan_device* wandev) -{ - volatile sdla_t* card; - TX25Status* status; - unsigned long timeout; - - /* sanity checks */ - if ((wandev == NULL) || (wandev->private == NULL)) - return -EFAULT; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - if (test_bit(SEND_CRIT, (void*)&wandev->critical)) - return -EAGAIN; - - if (!wandev->dev) - return -ENODEV; - - card = wandev->private; - status = card->flags; - - card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UPDATE; - status->imask |= INTR_ON_TIMER; - timeout = jiffies; - - for (;;){ - if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE)){ - break; - } - if (time_after(jiffies, timeout + 1*HZ)){ - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; - return -EAGAIN; - } - } - return 0; -} - - -/*=================================================================== - * Name: new_if - * - * Purpose: To allocate and initialize resources for a - * new logical channel. - * - * Rationale: A new channel can be added dynamically via - * ioctl call. - * - * Description: Allocate a private channel structure, x25_channel_t. - * Parse the user interface options from wanpipe#.conf - * configuration file. - * Bind the private are into the network device private - * area pointer (dev->priv). - * Prepare the network device structure for registration. - * - * Called by: ROUTER_IFNEW Ioctl call, from wanrouter_ioctl() - * (wanmain.c) - * - * Assumptions: None - * - * Warnings: None - * - * Return: 0 Ok - * <0 Failed (channel will not be created) - */ -static int new_if(struct wan_device* wandev, struct net_device* dev, - wanif_conf_t* conf) -{ - sdla_t* card = wandev->private; - x25_channel_t* chan; - int err = 0; - - if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)){ - printk(KERN_INFO "%s: invalid interface name!\n", - card->devname); - return -EINVAL; - } - - if(card->wandev.new_if_cnt++ > 0 && card->u.x.LAPB_hdlc) { - printk(KERN_INFO "%s: Error: Running LAPB HDLC Mode !\n", - card->devname); - printk(KERN_INFO - "%s: Maximum number of network interfaces must be one !\n", - card->devname); - return -EEXIST; - } - - /* allocate and initialize private data */ - chan = kmalloc(sizeof(x25_channel_t), GFP_ATOMIC); - if (chan == NULL){ - return -ENOMEM; - } - - memset(chan, 0, sizeof(x25_channel_t)); - - /* Bug Fix: Seg Err on PVC startup - * It must be here since bind_lcn_to_dev expects - * it bellow */ - dev->priv = chan; - - strcpy(chan->name, conf->name); - chan->card = card; - chan->dev = dev; - chan->common.sk = NULL; - chan->common.func = NULL; - chan->common.rw_bind = 0; - chan->tx_skb = chan->rx_skb = NULL; - - /* verify media address */ - if (conf->addr[0] == '@'){ /* SVC */ - chan->common.svc = 1; - strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); - - /* Set channel timeouts (default if not specified) */ - chan->idle_timeout = (conf->idle_timeout) ? - conf->idle_timeout : 90; - chan->hold_timeout = (conf->hold_timeout) ? - conf->hold_timeout : 10; - - }else if (isdigit(conf->addr[0])){ /* PVC */ - int lcn = dec_to_uint(conf->addr, 0); - - if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){ - bind_lcn_to_dev (card, dev, lcn); - }else{ - printk(KERN_ERR - "%s: PVC %u is out of range on interface %s!\n", - wandev->name, lcn, chan->name); - err = -EINVAL; - } - }else{ - printk(KERN_ERR - "%s: invalid media address on interface %s!\n", - wandev->name, chan->name); - err = -EINVAL; - } - - if(strcmp(conf->usedby, "WANPIPE") == 0){ - printk(KERN_INFO "%s: Running in WANPIPE mode %s\n", - wandev->name, chan->name); - chan->common.usedby = WANPIPE; - chan->protocol = htons(ETH_P_IP); - - }else if(strcmp(conf->usedby, "API") == 0){ - chan->common.usedby = API; - printk(KERN_INFO "%s: Running in API mode %s\n", - wandev->name, chan->name); - chan->protocol = htons(X25_PROT); - } - - - if (err){ - kfree(chan); - dev->priv = NULL; - return err; - } - - chan->enable_IPX = conf->enable_IPX; - - if (chan->enable_IPX) - chan->protocol = htons(ETH_P_IPX); - - if (conf->network_number) - chan->network_number = conf->network_number; - else - chan->network_number = 0xDEADBEEF; - - /* prepare network device data space for registration */ - strcpy(dev->name,chan->name); - - dev->init = &if_init; - - init_x25_channel_struct(chan); - - return 0; -} - -/*=================================================================== - * Name: del_if(), Remove a logical channel. - * - * Purpose: To dynamically remove a logical channel. - * - * Rationale: Each logical channel should be dynamically - * removable. This functin is called by an - * IOCTL_IFDEL ioctl call or shutdown(). - * - * Description: Do nothing. - * - * Called by: IOCTL_IFDEL : wanrouter_ioctl() from wanmain.c - * shutdown() from sdlamain.c - * - * Assumptions: - * - * Warnings: - * - * Return: 0 Ok. Void function. - */ - -//FIXME Del IF Should be taken out now. - -static int del_if(struct wan_device* wandev, struct net_device* dev) -{ - return 0; -} - - -/*============================================================ - * Name: wpx_exec - * - * Description: Execute adapter interface command. - * This option is currently dissabled. - *===========================================================*/ - -static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data) -{ - return 0; -} - -/*============================================================ - * Name: disable_comm - * - * Description: Disable communications during shutdown. - * Dont check return code because there is - * nothing we can do about it. - * - * Warning: Dev and private areas are gone at this point. - *===========================================================*/ - -static void disable_comm(sdla_t* card) -{ - disable_comm_shutdown(card); - del_timer(&card->u.x.x25_timer); - return; -} - - -/*============================================================ - * Network Device Interface - *===========================================================*/ - -/*=================================================================== - * Name: if_init(), Netowrk Interface Initialization - * - * Purpose: To initialize a network interface device structure. - * - * Rationale: During network interface startup, the if_init - * is called by the kernel to initialize the - * netowrk device structure. Thus a driver - * can customze a network device. - * - * Description: Initialize the netowrk device call back - * routines. This is where we tell the kernel - * which function to use when it wants to send - * via our interface. - * Furthermore, we initialize the device flags, - * MTU and physical address of the board. - * - * Called by: Kernel (/usr/src/linux/net/core/dev.c) - * (dev->init()) - * - * Assumptions: None - * - * Warnings: None - * - * Return: 0 Ok : Void function. - */ -static int if_init(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - struct wan_device* wandev = &card->wandev; - - /* Initialize device driver entry points */ - dev->open = &if_open; - dev->stop = &if_close; - dev->hard_header = &if_header; - dev->rebuild_header = &if_rebuild_hdr; - dev->hard_start_xmit = &if_send; - dev->get_stats = &if_stats; - dev->tx_timeout = &if_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - - /* Initialize media-specific parameters */ - dev->type = ARPHRD_PPP; /* ARP h/w type */ - dev->flags |= IFF_POINTOPOINT; - dev->flags |= IFF_NOARP; - - if (chan->common.usedby == API){ - dev->mtu = X25_CHAN_MTU+sizeof(x25api_hdr_t); - }else{ - dev->mtu = card->wandev.mtu; - } - - dev->hard_header_len = X25_HRDHDR_SZ; /* media header length */ - dev->addr_len = 2; /* hardware address length */ - - if (!chan->common.svc){ - *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); - } - - /* Initialize hardware parameters (just for reference) */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = (unsigned long)wandev->maddr; - dev->mem_end = wandev->maddr + wandev->msize - 1; - - /* Set transmit buffer queue length */ - dev->tx_queue_len = 100; - SET_MODULE_OWNER(dev); - - /* FIXME Why are we doing this */ - set_chan_state(dev, WAN_DISCONNECTED); - return 0; -} - - -/*=================================================================== - * Name: if_open(), Open/Bring up the Netowrk Interface - * - * Purpose: To bring up a network interface. - * - * Rationale: - * - * Description: Open network interface. - * o prevent module from unloading by incrementing use count - * o if link is disconnected then initiate connection - * - * Called by: Kernel (/usr/src/linux/net/core/dev.c) - * (dev->open()) - * - * Assumptions: None - * - * Warnings: None - * - * Return: 0 Ok - * <0 Failure: Interface will not come up. - */ - -static int if_open(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - struct timeval tv; - unsigned long smp_flags; - - if (netif_running(dev)) - return -EBUSY; - - chan->tq_working = 0; - - /* Initialize the workqueue */ - INIT_WORK(&chan->common.wanpipe_work, (void *)x25api_bh, dev); - - /* Allocate and initialize BH circular buffer */ - /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */ - chan->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC); - - if (chan->bh_head == NULL){ - printk(KERN_INFO "%s: ERROR, failed to allocate memory ! BH_BUFFERS !\n", - card->devname); - - return -ENOBUFS; - } - memset(chan->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1))); - atomic_set(&chan->bh_buff_used, 0); - - /* Increment the number of interfaces */ - ++card->u.x.no_dev; - - wanpipe_open(card); - - /* LAPB protocol only uses one interface, thus - * start the protocol after it comes up. */ - if (card->u.x.LAPB_hdlc){ - if (card->open_cnt == 1){ - TX25Status* status = card->flags; - S508_S514_lock(card, &smp_flags); - x25_set_intr_mode(card, INTR_ON_TIMER); - status->imask &= ~INTR_ON_TIMER; - S508_S514_unlock(card, &smp_flags); - } - }else{ - /* X25 can have multiple interfaces thus, start the - * protocol once all interfaces are up */ - - //FIXME: There is a bug here. If interface is - //brought down and up, it will try to enable comm. - if (card->open_cnt == card->u.x.num_of_ch){ - - S508_S514_lock(card, &smp_flags); - connect(card); - S508_S514_unlock(card, &smp_flags); - - mod_timer(&card->u.x.x25_timer, jiffies + HZ); - } - } - /* Device is not up until the we are in connected state */ - do_gettimeofday( &tv ); - chan->router_start_time = tv.tv_sec; - - netif_start_queue(dev); - - return 0; -} - -/*=================================================================== - * Name: if_close(), Close/Bring down the Netowrk Interface - * - * Purpose: To bring down a network interface. - * - * Rationale: - * - * Description: Close network interface. - * o decrement use module use count - * - * Called by: Kernel (/usr/src/linux/net/core/dev.c) - * (dev->close()) - * ifconfig <name> down: will trigger the kernel - * which will call this function. - * - * Assumptions: None - * - * Warnings: None - * - * Return: 0 Ok - * <0 Failure: Interface will not exit properly. - */ -static int if_close(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - unsigned long smp_flags; - - netif_stop_queue(dev); - - if ((chan->common.state == WAN_CONNECTED) || - (chan->common.state == WAN_CONNECTING)){ - S508_S514_lock(card, &smp_flags); - chan_disc(dev); - S508_S514_unlock(card, &smp_flags); - } - - wanpipe_close(card); - - S508_S514_lock(card, &smp_flags); - if (chan->bh_head){ - int i; - struct sk_buff *skb; - - for (i=0; i<(MAX_BH_BUFF+1); i++){ - skb = ((bh_data_t *)&chan->bh_head[i])->skb; - if (skb != NULL){ - dev_kfree_skb_any(skb); - } - } - kfree(chan->bh_head); - chan->bh_head=NULL; - } - S508_S514_unlock(card, &smp_flags); - - /* If this is the last close, disconnect physical link */ - if (!card->open_cnt){ - S508_S514_lock(card, &smp_flags); - disconnect(card); - x25_set_intr_mode(card, 0); - S508_S514_unlock(card, &smp_flags); - } - - /* Decrement the number of interfaces */ - --card->u.x.no_dev; - return 0; -} - -/*====================================================================== - * Build media header. - * o encapsulate packet according to encapsulation type. - * - * The trick here is to put packet type (Ethertype) into 'protocol' - * field of the socket buffer, so that we don't forget it. - * If encapsulation fails, set skb->protocol to 0 and discard - * packet later. - * - * Return: media header length. - *======================================================================*/ - -static int if_header(struct sk_buff* skb, struct net_device* dev, - unsigned short type, void* daddr, void* saddr, - unsigned len) -{ - x25_channel_t* chan = dev->priv; - int hdr_len = dev->hard_header_len; - - skb->protocol = htons(type); - if (!chan->protocol){ - hdr_len = wanrouter_encapsulate(skb, dev, type); - if (hdr_len < 0){ - hdr_len = 0; - skb->protocol = htons(0); - } - } - return hdr_len; -} - -/*=============================================================== - * Re-build media header. - * - * Return: 1 physical address resolved. - * 0 physical address not resolved - *==============================================================*/ - -static int if_rebuild_hdr (struct sk_buff* skb) -{ - struct net_device *dev = skb->dev; - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - - printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n", - card->devname, dev->name); - return 1; -} - - -/*============================================================================ - * Handle transmit timeout event from netif watchdog - */ -static void if_tx_timeout(struct net_device *dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - - /* If our device stays busy for at least 5 seconds then we will - * kick start the device by making dev->tbusy = 0. We expect - * that our device never stays busy more than 5 seconds. So this - * is only used as a last resort. - */ - - ++chan->if_send_stat.if_send_tbusy_timeout; - printk (KERN_INFO "%s: Transmit timed out on %s\n", - card->devname, dev->name); - netif_wake_queue (dev); -} - - -/*========================================================================= - * Send a packet on a network interface. - * o set tbusy flag (marks start of the transmission). - * o check link state. If link is not up, then drop the packet. - * o check channel status. If it's down then initiate a call. - * o pass a packet to corresponding WAN device. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * 2. Setting tbusy flag will inhibit further transmit requests from the - * protocol stack and can be used for flow control with protocol layer. - * - *========================================================================*/ - -static int if_send(struct sk_buff* skb, struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - TX25Status* status = card->flags; - int udp_type; - unsigned long smp_flags=0; - - ++chan->if_send_stat.if_send_entry; - - netif_stop_queue(dev); - - /* No need to check frame length, since socket code - * will perform the check for us */ - - chan->tick_counter = jiffies; - - /* Critical region starts here */ - S508_S514_lock(card, &smp_flags); - - if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)){ - printk(KERN_INFO "Hit critical in if_send()! %lx\n",card->wandev.critical); - goto if_send_crit_exit; - } - - udp_type = udp_pkt_type(skb, card); - - if(udp_type != UDP_INVALID_TYPE) { - - if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, dev, skb, - chan->common.lcn)) { - - status->imask |= INTR_ON_TIMER; - if (udp_type == UDP_XPIPE_TYPE){ - chan->if_send_stat.if_send_PIPE_request++; - } - } - netif_start_queue(dev); - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - S508_S514_unlock(card, &smp_flags); - return 0; - } - - if (chan->transmit_length){ - //FIXME: This check doesn't make sense any more - if (chan->common.state != WAN_CONNECTED){ - chan->transmit_length=0; - atomic_set(&chan->common.driver_busy,0); - }else{ - netif_stop_queue(dev); - ++card->u.x.tx_interrupts_pending; - status->imask |= INTR_ON_TX_FRAME; - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - S508_S514_unlock(card, &smp_flags); - return 1; - } - } - - if (card->wandev.state != WAN_CONNECTED){ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - ++chan->if_send_stat.if_send_wan_disconnected; - - }else if ( chan->protocol && (chan->protocol != skb->protocol)){ - printk(KERN_INFO - "%s: unsupported Ethertype 0x%04X on interface %s!\n", - chan->name, htons(skb->protocol), dev->name); - - printk(KERN_INFO "PROTO %Xn", htons(chan->protocol)); - ++chan->ifstats.tx_errors; - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - ++chan->if_send_stat.if_send_protocol_error; - - }else switch (chan->common.state){ - - case WAN_DISCONNECTED: - /* Try to establish connection. If succeded, then start - * transmission, else drop a packet. - */ - if (chan->common.usedby == API){ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - break; - }else{ - if (chan_connect(dev) != 0){ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - break; - } - } - /* fall through */ - - case WAN_CONNECTED: - if( skb->protocol == htons(ETH_P_IPX)) { - if(chan->enable_IPX) { - switch_net_numbers( skb->data, - chan->network_number, 0); - } else { - ++card->wandev.stats.tx_dropped; - ++chan->ifstats.tx_dropped; - ++chan->if_send_stat.if_send_protocol_error; - goto if_send_crit_exit; - } - } - /* We never drop here, if cannot send than, copy - * a packet into a transmit buffer - */ - chan_send(dev, skb->data, skb->len, 0); - break; - - default: - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - break; - } - - -if_send_crit_exit: - - dev_kfree_skb_any(skb); - - netif_start_queue(dev); - clear_bit(SEND_CRIT,(void*)&card->wandev.critical); - S508_S514_unlock(card, &smp_flags); - return 0; -} - -/*============================================================================ - * Setup so that a frame can be transmitted on the occurrence of a transmit - * interrupt. - *===========================================================================*/ - -static void setup_for_delayed_transmit(struct net_device* dev, void* buf, - unsigned len) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - TX25Status* status = card->flags; - - ++chan->if_send_stat.if_send_adptr_bfrs_full; - - if(chan->transmit_length) { - printk(KERN_INFO "%s: Error, transmit length set in delayed transmit!\n", - card->devname); - return; - } - - if (chan->common.usedby == API){ - if (len > X25_CHAN_MTU+sizeof(x25api_hdr_t)) { - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - printk(KERN_INFO "%s: Length is too big for delayed transmit\n", - card->devname); - return; - } - }else{ - if (len > X25_MAX_DATA) { - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - printk(KERN_INFO "%s: Length is too big for delayed transmit\n", - card->devname); - return; - } - } - - chan->transmit_length = len; - atomic_set(&chan->common.driver_busy,1); - memcpy(chan->transmit_buffer, buf, len); - - ++chan->if_send_stat.if_send_tx_int_enabled; - - /* Enable Transmit Interrupt */ - ++card->u.x.tx_interrupts_pending; - status->imask |= INTR_ON_TX_FRAME; -} - - -/*=============================================================== - * net_device_stats - * - * Get ethernet-style interface statistics. - * Return a pointer to struct enet_statistics. - * - *==============================================================*/ -static struct net_device_stats *if_stats(struct net_device* dev) -{ - x25_channel_t *chan = dev->priv; - - if(chan == NULL) - return NULL; - - return &chan->ifstats; -} - - -/* - * Interrupt Handlers - */ - -/* - * X.25 Interrupt Service Routine. - */ - -static void wpx_isr (sdla_t* card) -{ - TX25Status* status = card->flags; - - card->in_isr = 1; - ++card->statistics.isr_entry; - - if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){ - card->in_isr=0; - status->iflags = 0; - return; - } - - if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)){ - - printk(KERN_INFO "%s: wpx_isr: wandev.critical set to 0x%02lx, int type = 0x%02x\n", - card->devname, card->wandev.critical, status->iflags); - card->in_isr = 0; - status->iflags = 0; - return; - } - - /* For all interrupts set the critical flag to CRITICAL_RX_INTR. - * If the if_send routine is called with this flag set it will set - * the enable transmit flag to 1. (for a delayed interrupt) - */ - switch (status->iflags){ - - case RX_INTR_PENDING: /* receive interrupt */ - rx_intr(card); - break; - - case TX_INTR_PENDING: /* transmit interrupt */ - tx_intr(card); - break; - - case MODEM_INTR_PENDING: /* modem status interrupt */ - status_intr(card); - break; - - case X25_ASY_TRANS_INTR_PENDING: /* network event interrupt */ - event_intr(card); - break; - - case TIMER_INTR_PENDING: - timer_intr(card); - break; - - default: /* unwanted interrupt */ - spur_intr(card); - } - - card->in_isr = 0; - status->iflags = 0; /* clear interrupt condition */ -} - -/* - * Receive interrupt handler. - * This routine handles fragmented IP packets using M-bit according to the - * RFC1356. - * o map ligical channel number to network interface. - * o allocate socket buffer or append received packet to the existing one. - * o if M-bit is reset (i.e. it's the last packet in a sequence) then - * decapsulate packet and pass socket buffer to the protocol stack. - * - * Notes: - * 1. When allocating a socket buffer, if M-bit is set then more data is - * coming and we have to allocate buffer for the maximum IP packet size - * expected on this channel. - * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no - * socket buffers available) the whole packet sequence must be discarded. - */ - -static void rx_intr (sdla_t* card) -{ - TX25Mbox* rxmb = card->rxmb; - unsigned lcn = rxmb->cmd.lcn; - struct net_device* dev = find_channel(card,lcn); - x25_channel_t* chan; - struct sk_buff* skb=NULL; - - if (dev == NULL){ - /* Invalid channel, discard packet */ - printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n", - card->devname, lcn); - return; - } - - chan = dev->priv; - chan->i_timeout_sofar = jiffies; - - - /* Copy the data from the board, into an - * skb buffer - */ - if (wanpipe_pull_data_in_skb(card,dev,&skb)){ - ++chan->ifstats.rx_dropped; - ++card->wandev.stats.rx_dropped; - ++chan->rx_intr_stat.rx_intr_no_socket; - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - return; - } - - dev->last_rx = jiffies; /* timestamp */ - - - /* ------------ API ----------------*/ - - if (chan->common.usedby == API){ - - if (bh_enqueue(dev, skb)){ - ++chan->ifstats.rx_dropped; - ++card->wandev.stats.rx_dropped; - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - dev_kfree_skb_any(skb); - return; - } - - ++chan->ifstats.rx_packets; - chan->ifstats.rx_bytes += skb->len; - - - chan->rx_skb = NULL; - if (!test_and_set_bit(0, &chan->tq_working)){ - wanpipe_queue_work(&chan->common.wanpipe_work); - } - return; - } - - - /* ------------- WANPIPE -------------------*/ - - /* set rx_skb to NULL so we won't access it later when kernel already owns it */ - chan->rx_skb=NULL; - - /* Decapsulate packet, if necessary */ - if (!skb->protocol && !wanrouter_type_trans(skb, dev)){ - /* can't decapsulate packet */ - dev_kfree_skb_any(skb); - ++chan->ifstats.rx_errors; - ++chan->ifstats.rx_dropped; - ++card->wandev.stats.rx_dropped; - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - - }else{ - if( handle_IPXWAN(skb->data, chan->name, - chan->enable_IPX, chan->network_number, - skb->protocol)){ - - if( chan->enable_IPX ){ - if(chan_send(dev, skb->data, skb->len,0)){ - chan->tx_skb = skb; - }else{ - dev_kfree_skb_any(skb); - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - } - }else{ - /* increment IPX packet dropped statistic */ - ++chan->ifstats.rx_dropped; - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - } - }else{ - skb->mac.raw = skb->data; - chan->ifstats.rx_bytes += skb->len; - ++chan->ifstats.rx_packets; - ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; - netif_rx(skb); - } - } - - return; -} - - -static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, - struct sk_buff **skb) -{ - void *bufptr; - TX25Mbox* rxmb = card->rxmb; - unsigned len = rxmb->cmd.length; /* packet length */ - unsigned qdm = rxmb->cmd.qdm; /* Q,D and M bits */ - x25_channel_t *chan = dev->priv; - struct sk_buff *new_skb = *skb; - - if (chan->common.usedby == WANPIPE){ - if (chan->drop_sequence){ - if (!(qdm & 0x01)){ - chan->drop_sequence = 0; - } - return 1; - } - new_skb = chan->rx_skb; - }else{ - /* Add on the API header to the received - * data - */ - len += sizeof(x25api_hdr_t); - } - - if (new_skb == NULL){ - int bufsize; - - if (chan->common.usedby == WANPIPE){ - bufsize = (qdm & 0x01) ? dev->mtu : len; - }else{ - bufsize = len; - } - - /* Allocate new socket buffer */ - new_skb = dev_alloc_skb(bufsize + dev->hard_header_len); - if (new_skb == NULL){ - printk(KERN_INFO "%s: no socket buffers available!\n", - card->devname); - chan->drop_sequence = 1; /* set flag */ - ++chan->ifstats.rx_dropped; - return 1; - } - } - - if (skb_tailroom(new_skb) < len){ - /* No room for the packet. Call off the whole thing! */ - dev_kfree_skb_any(new_skb); - if (chan->common.usedby == WANPIPE){ - chan->rx_skb = NULL; - if (qdm & 0x01){ - chan->drop_sequence = 1; - } - } - - printk(KERN_INFO "%s: unexpectedly long packet sequence " - "on interface %s!\n", card->devname, dev->name); - ++chan->ifstats.rx_length_errors; - return 1; - } - - bufptr = skb_put(new_skb,len); - - - if (chan->common.usedby == API){ - /* Fill in the x25api header - */ - x25api_t * api_data = (x25api_t*)bufptr; - api_data->hdr.qdm = rxmb->cmd.qdm; - api_data->hdr.cause = rxmb->cmd.cause; - api_data->hdr.diagn = rxmb->cmd.diagn; - api_data->hdr.length = rxmb->cmd.length; - memcpy(api_data->data, rxmb->data, rxmb->cmd.length); - }else{ - memcpy(bufptr, rxmb->data, len); - } - - new_skb->dev = dev; - - if (chan->common.usedby == API){ - new_skb->mac.raw = new_skb->data; - new_skb->protocol = htons(X25_PROT); - new_skb->pkt_type = WAN_PACKET_DATA; - }else{ - new_skb->protocol = chan->protocol; - chan->rx_skb = new_skb; - } - - /* If qdm bit is set, more data is coming - * thus, exit and wait for more data before - * sending the packet up. (Used by router only) - */ - if ((qdm & 0x01) && (chan->common.usedby == WANPIPE)) - return 1; - - *skb = new_skb; - - return 0; -} - -/*=============================================================== - * tx_intr - * - * Transmit interrupt handler. - * For each dev, check that there is something to send. - * If data available, transmit. - * - *===============================================================*/ - -static void tx_intr (sdla_t* card) -{ - struct net_device *dev; - TX25Status* status = card->flags; - unsigned char more_to_tx=0; - x25_channel_t *chan=NULL; - int i=0; - - if (card->u.x.tx_dev == NULL){ - card->u.x.tx_dev = card->wandev.dev; - } - - dev = card->u.x.tx_dev; - - for (;;){ - - chan = dev->priv; - if (chan->transmit_length){ - /* Device was set to transmit, check if the TX - * buffers are available - */ - if (chan->common.state != WAN_CONNECTED){ - chan->transmit_length = 0; - atomic_set(&chan->common.driver_busy,0); - chan->tx_offset=0; - if (netif_queue_stopped(dev)){ - if (chan->common.usedby == API){ - netif_start_queue(dev); - wakeup_sk_bh(dev); - }else{ - netif_wake_queue(dev); - } - } - dev = move_dev_to_next(card,dev); - break; - } - - if ((status->cflags[chan->ch_idx] & 0x40 || card->u.x.LAPB_hdlc) && - (*card->u.x.hdlc_buf_status & 0x40) ){ - /* Tx buffer available, we can send */ - - if (tx_intr_send(card, dev)){ - more_to_tx=1; - } - - /* If more than one interface present, move the - * device pointer to the next interface, so on the - * next TX interrupt we will try sending from it. - */ - dev = move_dev_to_next(card,dev); - break; - }else{ - /* Tx buffers not available, but device set - * the TX interrupt. Set more_to_tx and try - * to transmit for other devices. - */ - more_to_tx=1; - dev = move_dev_to_next(card,dev); - } - - }else{ - /* This device was not set to transmit, - * go to next - */ - dev = move_dev_to_next(card,dev); - } - - if (++i == card->u.x.no_dev){ - if (!more_to_tx){ - DBG_PRINTK(KERN_INFO "%s: Nothing to Send in TX INTR\n", - card->devname); - } - break; - } - - } //End of FOR - - card->u.x.tx_dev = dev; - - if (!more_to_tx){ - /* if any other interfaces have transmit interrupts pending, */ - /* do not disable the global transmit interrupt */ - if (!(--card->u.x.tx_interrupts_pending)){ - status->imask &= ~INTR_ON_TX_FRAME; - } - } - return; -} - -/*=============================================================== - * move_dev_to_next - * - * - *===============================================================*/ - - -struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev) -{ - if (card->u.x.no_dev != 1){ - if (!*((struct net_device **)dev->priv)) - return card->wandev.dev; - else - return *((struct net_device **)dev->priv); - } - return dev; -} - -/*=============================================================== - * tx_intr_send - * - * - *===============================================================*/ - -static int tx_intr_send(sdla_t *card, struct net_device *dev) -{ - x25_channel_t* chan = dev->priv; - - if (chan_send (dev,chan->transmit_buffer,chan->transmit_length,1)){ - - /* Packet was split up due to its size, do not disable - * tx_intr - */ - return 1; - } - - chan->transmit_length=0; - atomic_set(&chan->common.driver_busy,0); - chan->tx_offset=0; - - /* If we are in API mode, wakeup the - * sock BH handler, not the NET_BH */ - if (netif_queue_stopped(dev)){ - if (chan->common.usedby == API){ - netif_start_queue(dev); - wakeup_sk_bh(dev); - }else{ - netif_wake_queue(dev); - } - } - return 0; -} - - -/*=============================================================== - * timer_intr - * - * Timer interrupt handler. - * Check who called the timer interrupt and perform - * action accordingly. - * - *===============================================================*/ - -static void timer_intr (sdla_t *card) -{ - TX25Status* status = card->flags; - - if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC){ - - if (timer_intr_cmd_exec(card) == 0){ - card->u.x.timer_int_enabled &= - ~TMR_INT_ENABLED_CMD_EXEC; - } - - }else if(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UDP_PKT) { - - if ((*card->u.x.hdlc_buf_status & 0x40) && - card->u.x.udp_type == UDP_XPIPE_TYPE){ - - if(process_udp_mgmt_pkt(card)) { - card->u.x.timer_int_enabled &= - ~TMR_INT_ENABLED_UDP_PKT; - } - } - - }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_ACTIVE) { - - struct net_device *dev = card->u.x.poll_device; - x25_channel_t *chan = NULL; - - if (!dev){ - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; - return; - } - chan = dev->priv; - - printk(KERN_INFO - "%s: Closing down Idle link %s on LCN %d\n", - card->devname,chan->name,chan->common.lcn); - chan->i_timeout_sofar = jiffies; - chan_disc(dev); - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; - card->u.x.poll_device=NULL; - - }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_ON) { - - wanpipe_set_state(card, WAN_CONNECTED); - if (card->u.x.LAPB_hdlc){ - struct net_device *dev = card->wandev.dev; - set_chan_state(dev,WAN_CONNECTED); - send_delayed_cmd_result(card,dev,card->mbox); - } - - /* 0x8F enable all interrupts */ - x25_set_intr_mode(card, INTR_ON_RX_FRAME| - INTR_ON_TX_FRAME| - INTR_ON_MODEM_STATUS_CHANGE| - //INTR_ON_COMMAND_COMPLETE| - X25_ASY_TRANS_INTR_PENDING | - INTR_ON_TIMER | - DIRECT_RX_INTR_USAGE - ); - - status->imask &= ~INTR_ON_TX_FRAME; /* mask Tx interrupts */ - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_ON; - - }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_OFF) { - - //printk(KERN_INFO "Poll connect, Turning OFF\n"); - disconnect(card); - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_OFF; - - }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_DISCONNECT) { - - //printk(KERN_INFO "POll disconnect, trying to connect\n"); - connect(card); - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_DISCONNECT; - - }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE){ - - if (*card->u.x.hdlc_buf_status & 0x40){ - x25_get_err_stats(card); - x25_get_stats(card); - card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; - } - } - - if(!card->u.x.timer_int_enabled){ - //printk(KERN_INFO "Turning Timer Off \n"); - status->imask &= ~INTR_ON_TIMER; - } -} - -/*==================================================================== - * Modem status interrupt handler. - *===================================================================*/ -static void status_intr (sdla_t* card) -{ - - /* Added to avoid Modem status message flooding */ - static TX25ModemStatus last_stat; - - TX25Mbox* mbox = card->mbox; - TX25ModemStatus *modem_status; - struct net_device *dev; - x25_channel_t *chan; - int err; - - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_READ_MODEM_STATUS; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err){ - x25_error(card, err, X25_READ_MODEM_STATUS, 0); - }else{ - - modem_status = (TX25ModemStatus*)mbox->data; - - /* Check if the last status was the same - * if it was, do NOT print message again */ - - if (last_stat.status != modem_status->status){ - - printk(KERN_INFO "%s: Modem Status Change: DCD=%s, CTS=%s\n", - card->devname,DCD(modem_status->status),CTS(modem_status->status)); - - last_stat.status = modem_status->status; - - if (card->u.x.oob_on_modem){ - - mbox->cmd.pktType = mbox->cmd.command; - mbox->cmd.result = 0x08; - - /* Send a OOB to all connected sockets */ - for (dev = card->wandev.dev; dev; - dev = *((struct net_device**)dev->priv)) { - chan=dev->priv; - if (chan->common.usedby == API){ - send_oob_msg(card,dev,mbox); - } - } - - /* The modem OOB message will probably kill the - * the link. If we don't clear the flag here, - * a deadlock could occur */ - if (atomic_read(&card->u.x.command_busy)){ - atomic_set(&card->u.x.command_busy,0); - } - } - } - } - - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_HDLC_LINK_STATUS; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err){ - x25_error(card, err, X25_HDLC_LINK_STATUS, 0); - } - -} - -/*==================================================================== - * Network event interrupt handler. - *===================================================================*/ -static void event_intr (sdla_t* card) -{ - x25_fetch_events(card); -} - -/*==================================================================== - * Spurious interrupt handler. - * o print a warning - * o - *====================================================================*/ - -static void spur_intr (sdla_t* card) -{ - printk(KERN_INFO "%s: spurious interrupt!\n", card->devname); -} - - -/* - * Background Polling Routines - */ - -/*==================================================================== - * Main polling routine. - * This routine is repeatedly called by the WANPIPE 'thread' to allow for - * time-dependent housekeeping work. - * - * Notes: - * 1. This routine may be called on interrupt context with all interrupts - * enabled. Beware! - *====================================================================*/ - -static void wpx_poll (sdla_t *card) -{ - if (!card->wandev.dev){ - goto wpx_poll_exit; - } - - if (card->open_cnt != card->u.x.num_of_ch){ - goto wpx_poll_exit; - } - - if (test_bit(PERI_CRIT,&card->wandev.critical)){ - goto wpx_poll_exit; - } - - if (test_bit(SEND_CRIT,&card->wandev.critical)){ - goto wpx_poll_exit; - } - - switch(card->wandev.state){ - case WAN_CONNECTED: - poll_active(card); - break; - - case WAN_CONNECTING: - poll_connecting(card); - break; - - case WAN_DISCONNECTED: - poll_disconnected(card); - break; - } - -wpx_poll_exit: - clear_bit(POLL_CRIT,&card->wandev.critical); - return; -} - -static void trigger_x25_poll(sdla_t *card) -{ - schedule_work(&card->u.x.x25_poll_work); -} - -/*==================================================================== - * Handle physical link establishment phase. - * o if connection timed out, disconnect the link. - *===================================================================*/ - -static void poll_connecting (sdla_t* card) -{ - volatile TX25Status* status = card->flags; - - if (status->gflags & X25_HDLC_ABM){ - - timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_ON); - - }else if ((jiffies - card->state_tick) > CONNECT_TIMEOUT){ - - timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_OFF); - - } -} - -/*==================================================================== - * Handle physical link disconnected phase. - * o if hold-down timeout has expired and there are open interfaces, - * connect link. - *===================================================================*/ - -static void poll_disconnected (sdla_t* card) -{ - struct net_device *dev; - x25_channel_t *chan; - TX25Status* status = card->flags; - - if (!card->u.x.LAPB_hdlc && card->open_cnt && - ((jiffies - card->state_tick) > HOLD_DOWN_TIME)){ - timer_intr_exec(card, TMR_INT_ENABLED_POLL_DISCONNECT); - } - - - if ((dev=card->wandev.dev) == NULL) - return; - - if ((chan=dev->priv) == NULL) - return; - - if (chan->common.usedby == API && - atomic_read(&chan->common.command) && - card->u.x.LAPB_hdlc){ - - if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) - card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; - - if (!(status->imask & INTR_ON_TIMER)) - status->imask |= INTR_ON_TIMER; - } - -} - -/*==================================================================== - * Handle active link phase. - * o fetch X.25 asynchronous events. - * o kick off transmission on all interfaces. - *===================================================================*/ - -static void poll_active (sdla_t* card) -{ - struct net_device* dev; - TX25Status* status = card->flags; - - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)){ - x25_channel_t* chan = dev->priv; - - /* If SVC has been idle long enough, close virtual circuit */ - if ( chan->common.svc && - chan->common.state == WAN_CONNECTED && - chan->common.usedby == WANPIPE ){ - - if( (jiffies - chan->i_timeout_sofar) / HZ > chan->idle_timeout ){ - /* Close svc */ - card->u.x.poll_device=dev; - timer_intr_exec (card, TMR_INT_ENABLED_POLL_ACTIVE); - } - } - -#ifdef PRINT_DEBUG - chan->ifstats.tx_compressed = atomic_read(&chan->common.command); - chan->ifstats.tx_errors = chan->common.state; - chan->ifstats.rx_fifo_errors = atomic_read(&card->u.x.command_busy); - ++chan->ifstats.tx_bytes; - - chan->ifstats.rx_fifo_errors=atomic_read(&chan->common.disconnect); - chan->ifstats.multicast=atomic_read(&chan->bh_buff_used); - chan->ifstats.rx_length_errors=*card->u.x.hdlc_buf_status; -#endif - - if (chan->common.usedby == API && - atomic_read(&chan->common.command) && - !card->u.x.LAPB_hdlc){ - - if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) - card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; - - if (!(status->imask & INTR_ON_TIMER)) - status->imask |= INTR_ON_TIMER; - } - - if ((chan->common.usedby == API) && - atomic_read(&chan->common.disconnect)){ - - if (chan->common.state == WAN_DISCONNECTED){ - atomic_set(&chan->common.disconnect,0); - return; - } - - atomic_set(&chan->common.command,X25_CLEAR_CALL); - if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) - card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; - - if (!(status->imask & INTR_ON_TIMER)) - status->imask |= INTR_ON_TIMER; - } - } -} - -static void timer_intr_exec(sdla_t *card, unsigned char TYPE) -{ - TX25Status* status = card->flags; - card->u.x.timer_int_enabled |= TYPE; - if (!(status->imask & INTR_ON_TIMER)) - status->imask |= INTR_ON_TIMER; -} - - -/*==================================================================== - * SDLA Firmware-Specific Functions - * - * Almost all X.25 commands can unexpetedly fail due to so called 'X.25 - * asynchronous events' such as restart, interrupt, incoming call request, - * call clear request, etc. They can't be ignored and have to be delt with - * immediately. To tackle with this problem we execute each interface - * command in a loop until good return code is received or maximum number - * of retries is reached. Each interface command returns non-zero return - * code, an asynchronous event/error handler x25_error() is called. - *====================================================================*/ - -/*==================================================================== - * Read X.25 firmware version. - * Put code version as ASCII string in str. - *===================================================================*/ - -static int x25_get_version (sdla_t* card, char* str) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_READ_CODE_VERSION; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && - x25_error(card, err, X25_READ_CODE_VERSION, 0)); - - if (!err && str) - { - int len = mbox->cmd.length; - - memcpy(str, mbox->data, len); - str[len] = '\0'; - } - return err; -} - -/*==================================================================== - * Configure adapter. - *===================================================================*/ - -static int x25_configure (sdla_t* card, TX25Config* conf) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do{ - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); - mbox->cmd.length = sizeof(TX25Config); - mbox->cmd.command = X25_SET_CONFIGURATION; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); - return err; -} - -/*==================================================================== - * Configure adapter for HDLC only. - *===================================================================*/ - -static int hdlc_configure (sdla_t* card, TX25Config* conf) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do{ - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); - mbox->cmd.length = sizeof(TX25Config); - mbox->cmd.command = X25_HDLC_SET_CONFIG; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); - - return err; -} - -static int set_hdlc_level (sdla_t* card) -{ - - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do{ - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = SET_PROTOCOL_LEVEL; - mbox->cmd.length = 1; - mbox->data[0] = HDLC_LEVEL; //| DO_HDLC_LEVEL_ERROR_CHECKING; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, SET_PROTOCOL_LEVEL, 0)); - - return err; -} - - - -/*==================================================================== - * Get communications error statistics. - *====================================================================*/ - -static int x25_get_err_stats (sdla_t* card) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_HDLC_READ_COMM_ERR; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_HDLC_READ_COMM_ERR, 0)); - - if (!err) - { - THdlcCommErr* stats = (void*)mbox->data; - - card->wandev.stats.rx_over_errors = stats->rxOverrun; - card->wandev.stats.rx_crc_errors = stats->rxBadCrc; - card->wandev.stats.rx_missed_errors = stats->rxAborted; - card->wandev.stats.tx_aborted_errors = stats->txAborted; - } - return err; -} - -/*==================================================================== - * Get protocol statistics. - *===================================================================*/ - -static int x25_get_stats (sdla_t* card) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_READ_STATISTICS; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_READ_STATISTICS, 0)) ; - - if (!err) - { - TX25Stats* stats = (void*)mbox->data; - - card->wandev.stats.rx_packets = stats->rxData; - card->wandev.stats.tx_packets = stats->txData; - } - return err; -} - -/*==================================================================== - * Close HDLC link. - *===================================================================*/ - -static int x25_close_hdlc (sdla_t* card) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_HDLC_LINK_CLOSE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_CLOSE, 0)); - - return err; -} - - -/*==================================================================== - * Open HDLC link. - *===================================================================*/ - -static int x25_open_hdlc (sdla_t* card) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_HDLC_LINK_OPEN; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_OPEN, 0)); - - return err; -} - -/*===================================================================== - * Setup HDLC link. - *====================================================================*/ -static int x25_setup_hdlc (sdla_t* card) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_HDLC_LINK_SETUP; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_SETUP, 0)); - - return err; -} - -/*==================================================================== - * Set (raise/drop) DTR. - *===================================================================*/ - -static int x25_set_dtr (sdla_t* card, int dtr) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->data[0] = 0; - mbox->data[2] = 0; - mbox->data[1] = dtr ? 0x02 : 0x01; - mbox->cmd.length = 3; - mbox->cmd.command = X25_SET_GLOBAL_VARS; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_SET_GLOBAL_VARS, 0)); - - return err; -} - -/*==================================================================== - * Set interrupt mode. - *===================================================================*/ - -static int x25_set_intr_mode (sdla_t* card, int mode) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->data[0] = mode; - if (card->hw.fwid == SFID_X25_508){ - mbox->data[1] = card->hw.irq; - mbox->data[2] = 2; - mbox->cmd.length = 3; - }else { - mbox->cmd.length = 1; - } - mbox->cmd.command = X25_SET_INTERRUPT_MODE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_SET_INTERRUPT_MODE, 0)); - - return err; -} - -/*==================================================================== - * Read X.25 channel configuration. - *===================================================================*/ - -static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int lcn = chan->common.lcn; - int err; - - do{ - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.lcn = lcn; - mbox->cmd.command = X25_READ_CHANNEL_CONFIG; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_READ_CHANNEL_CONFIG, lcn)); - - if (!err) - { - TX25Status* status = card->flags; - - /* calculate an offset into the array of status bytes */ - if (card->u.x.hi_svc <= X25_MAX_CHAN){ - - chan->ch_idx = lcn - 1; - - }else{ - int offset; - - /* FIX: Apr 14 2000 : Nenad Corbic - * The data field was being compared to 0x1F using - * '&&' instead of '&'. - * This caused X25API to fail for LCNs greater than 255. - */ - switch (mbox->data[0] & 0x1F) - { - case 0x01: - offset = status->pvc_map; break; - case 0x03: - offset = status->icc_map; break; - case 0x07: - offset = status->twc_map; break; - case 0x0B: - offset = status->ogc_map; break; - default: - offset = 0; - } - chan->ch_idx = lcn - 1 - offset; - } - - /* get actual transmit packet size on this channel */ - switch(mbox->data[1] & 0x38) - { - case 0x00: - chan->tx_pkt_size = 16; - break; - case 0x08: - chan->tx_pkt_size = 32; - break; - case 0x10: - chan->tx_pkt_size = 64; - break; - case 0x18: - chan->tx_pkt_size = 128; - break; - case 0x20: - chan->tx_pkt_size = 256; - break; - case 0x28: - chan->tx_pkt_size = 512; - break; - case 0x30: - chan->tx_pkt_size = 1024; - break; - } - if (card->u.x.logging) - printk(KERN_INFO "%s: X.25 packet size on LCN %d is %d.\n", - card->devname, lcn, chan->tx_pkt_size); - } - return err; -} - -/*==================================================================== - * Place X.25 call. - *====================================================================*/ - -static int x25_place_call (sdla_t* card, x25_channel_t* chan) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - char str[64]; - - - if (chan->protocol == htons(ETH_P_IP)){ - sprintf(str, "-d%s -uCC", chan->addr); - - }else if (chan->protocol == htons(ETH_P_IPX)){ - sprintf(str, "-d%s -u800000008137", chan->addr); - - } - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - strcpy(mbox->data, str); - mbox->cmd.length = strlen(str); - mbox->cmd.command = X25_PLACE_CALL; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_PLACE_CALL, 0)); - - if (!err){ - bind_lcn_to_dev (card, chan->dev, mbox->cmd.lcn); - } - return err; -} - -/*==================================================================== - * Accept X.25 call. - *====================================================================*/ - -static int x25_accept_call (sdla_t* card, int lcn, int qdm) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.lcn = lcn; - mbox->cmd.qdm = qdm; - mbox->cmd.command = X25_ACCEPT_CALL; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_ACCEPT_CALL, lcn)); - - return err; -} - -/*==================================================================== - * Clear X.25 call. - *====================================================================*/ - -static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.lcn = lcn; - mbox->cmd.cause = cause; - mbox->cmd.diagn = diagn; - mbox->cmd.command = X25_CLEAR_CALL; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, X25_CLEAR_CALL, lcn)); - - return err; -} - -/*==================================================================== - * Send X.25 data packet. - *====================================================================*/ - -static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf) -{ - TX25Mbox* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - unsigned char cmd; - - if (card->u.x.LAPB_hdlc) - cmd = X25_HDLC_WRITE; - else - cmd = X25_WRITE; - - do - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - memcpy(mbox->data, buf, len); - mbox->cmd.length = len; - mbox->cmd.lcn = lcn; - - if (card->u.x.LAPB_hdlc){ - mbox->cmd.pf = qdm; - }else{ - mbox->cmd.qdm = qdm; - } - - mbox->cmd.command = cmd; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && x25_error(card, err, cmd , lcn)); - - - /* If buffers are busy the return code for LAPB HDLC is - * 1. The above functions are looking for return code - * of X25RES_NOT_READY if busy. */ - - if (card->u.x.LAPB_hdlc && err == 1){ - err = X25RES_NOT_READY; - } - - return err; -} - -/*==================================================================== - * Fetch X.25 asynchronous events. - *===================================================================*/ - -static int x25_fetch_events (sdla_t* card) -{ - TX25Status* status = card->flags; - TX25Mbox* mbox = card->mbox; - int err = 0; - - if (status->gflags & 0x20) - { - memset(&mbox->cmd, 0, sizeof(TX25Cmd)); - mbox->cmd.command = X25_IS_DATA_AVAILABLE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err) x25_error(card, err, X25_IS_DATA_AVAILABLE, 0); - } - return err; -} - -/*==================================================================== - * X.25 asynchronous event/error handler. - * This routine is called each time interface command returns - * non-zero return code to handle X.25 asynchronous events and - * common errors. Return non-zero to repeat command or zero to - * cancel it. - * - * Notes: - * 1. This function may be called recursively, as handling some of the - * asynchronous events (e.g. call request) requires execution of the - * interface command(s) that, in turn, may also return asynchronous - * events. To avoid re-entrancy problems we copy mailbox to dynamically - * allocated memory before processing events. - *====================================================================*/ - -static int x25_error (sdla_t* card, int err, int cmd, int lcn) -{ - int retry = 1; - unsigned dlen = ((TX25Mbox*)card->mbox)->cmd.length; - TX25Mbox* mb; - - mb = kmalloc(sizeof(TX25Mbox) + dlen, GFP_ATOMIC); - if (mb == NULL) - { - printk(KERN_ERR "%s: x25_error() out of memory!\n", - card->devname); - return 0; - } - memcpy(mb, card->mbox, sizeof(TX25Mbox) + dlen); - switch (err){ - - case X25RES_ASYNC_PACKET: /* X.25 asynchronous packet was received */ - - mb->data[dlen] = '\0'; - - switch (mb->cmd.pktType & 0x7F){ - - case ASE_CALL_RQST: /* incoming call */ - retry = incoming_call(card, cmd, lcn, mb); - break; - - case ASE_CALL_ACCEPTED: /* connected */ - retry = call_accepted(card, cmd, lcn, mb); - break; - - case ASE_CLEAR_RQST: /* call clear request */ - retry = call_cleared(card, cmd, lcn, mb); - break; - - case ASE_RESET_RQST: /* reset request */ - printk(KERN_INFO "%s: X.25 reset request on LCN %d! " - "Cause:0x%02X Diagn:0x%02X\n", - card->devname, mb->cmd.lcn, mb->cmd.cause, - mb->cmd.diagn); - api_oob_event (card,mb); - break; - - case ASE_RESTART_RQST: /* restart request */ - retry = restart_event(card, cmd, lcn, mb); - break; - - case ASE_CLEAR_CONFRM: - if (clear_confirm_event (card,mb)) - break; - - /* I use the goto statement here so if - * somebody inserts code between the - * case and default, we will not have - * ghost problems */ - - goto dflt_1; - - default: -dflt_1: - printk(KERN_INFO "%s: X.25 event 0x%02X on LCN %d! " - "Cause:0x%02X Diagn:0x%02X\n", - card->devname, mb->cmd.pktType, - mb->cmd.lcn, mb->cmd.cause, mb->cmd.diagn); - } - break; - - case X25RES_PROTO_VIOLATION: /* X.25 protocol violation indication */ - - /* Bug Fix: Mar 14 2000 - * The Protocol violation error conditions were - * not handled previously */ - - switch (mb->cmd.pktType & 0x7F){ - - case PVE_CLEAR_RQST: /* Clear request */ - retry = call_cleared(card, cmd, lcn, mb); - break; - - case PVE_RESET_RQST: /* Reset request */ - printk(KERN_INFO "%s: X.25 reset request on LCN %d! " - "Cause:0x%02X Diagn:0x%02X\n", - card->devname, mb->cmd.lcn, mb->cmd.cause, - mb->cmd.diagn); - api_oob_event (card,mb); - break; - - case PVE_RESTART_RQST: /* Restart request */ - retry = restart_event(card, cmd, lcn, mb); - break; - - default : - printk(KERN_INFO - "%s: X.25 protocol violation on LCN %d! " - "Packet:0x%02X Cause:0x%02X Diagn:0x%02X\n", - card->devname, mb->cmd.lcn, - mb->cmd.pktType & 0x7F, mb->cmd.cause, mb->cmd.diagn); - api_oob_event(card,mb); - } - break; - - case 0x42: /* X.25 timeout */ - retry = timeout_event(card, cmd, lcn, mb); - break; - - case 0x43: /* X.25 retry limit exceeded */ - printk(KERN_INFO - "%s: exceeded X.25 retry limit on LCN %d! " - "Packet:0x%02X Diagn:0x%02X\n", card->devname, - mb->cmd.lcn, mb->cmd.pktType, mb->cmd.diagn) - ; - break; - - case 0x08: /* modem failure */ -#ifndef MODEM_NOT_LOG - printk(KERN_INFO "%s: modem failure!\n", card->devname); -#endif /* MODEM_NOT_LOG */ - api_oob_event(card,mb); - break; - - case 0x09: /* N2 retry limit */ - printk(KERN_INFO "%s: exceeded HDLC retry limit!\n", - card->devname); - api_oob_event(card,mb); - break; - - case 0x06: /* unnumbered frame was received while in ABM */ - printk(KERN_INFO "%s: received Unnumbered frame 0x%02X!\n", - card->devname, mb->data[0]); - api_oob_event(card,mb); - break; - - case CMD_TIMEOUT: - printk(KERN_ERR "%s: command 0x%02X timed out!\n", - card->devname, cmd) - ; - retry = 0; /* abort command */ - break; - - case X25RES_NOT_READY: - retry = 1; - break; - - case 0x01: - if (card->u.x.LAPB_hdlc) - break; - - if (mb->cmd.command == 0x16) - break; - /* I use the goto statement here so if - * somebody inserts code between the - * case and default, we will not have - * ghost problems */ - goto dflt_2; - - default: -dflt_2: - printk(KERN_INFO "%s: command 0x%02X returned 0x%02X! Lcn %i\n", - card->devname, cmd, err, mb->cmd.lcn) - ; - retry = 0; /* abort command */ - } - kfree(mb); - return retry; -} - -/*==================================================================== - * X.25 Asynchronous Event Handlers - * These functions are called by the x25_error() and should return 0, if - * the command resulting in the asynchronous event must be aborted. - *====================================================================*/ - - - -/*==================================================================== - *Handle X.25 incoming call request. - * RFC 1356 establishes the following rules: - * 1. The first octet in the Call User Data (CUD) field of the call - * request packet contains NLPID identifying protocol encapsulation - * 2. Calls MUST NOT be accepted unless router supports requested - * protocol encapsulation. - * 3. A diagnostic code 249 defined by ISO/IEC 8208 may be used - * when clearing a call because protocol encapsulation is not - * supported. - * 4. If an incoming call is received while a call request is - * pending (i.e. call collision has occurred), the incoming call - * shall be rejected and call request shall be retried. - *====================================================================*/ - -static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) -{ - struct wan_device* wandev = &card->wandev; - int new_lcn = mb->cmd.lcn; - struct net_device* dev = get_dev_by_lcn(wandev, new_lcn); - x25_channel_t* chan = NULL; - int accept = 0; /* set to '1' if o.k. to accept call */ - unsigned int user_data; - x25_call_info_t* info; - - /* Make sure there is no call collision */ - if (dev != NULL) - { - printk(KERN_INFO - "%s: X.25 incoming call collision on LCN %d!\n", - card->devname, new_lcn); - - x25_clear_call(card, new_lcn, 0, 0); - return 1; - } - - /* Make sure D bit is not set in call request */ -//FIXME: THIS IS NOT TURE !!!! TAKE IT OUT -// if (mb->cmd.qdm & 0x02) -// { -// printk(KERN_INFO -// "%s: X.25 incoming call on LCN %d with D-bit set!\n", -// card->devname, new_lcn); -// -// x25_clear_call(card, new_lcn, 0, 0); -// return 1; -// } - - /* Parse call request data */ - info = kmalloc(sizeof(x25_call_info_t), GFP_ATOMIC); - if (info == NULL) - { - printk(KERN_ERR - "%s: not enough memory to parse X.25 incoming call " - "on LCN %d!\n", card->devname, new_lcn); - x25_clear_call(card, new_lcn, 0, 0); - return 1; - } - - parse_call_info(mb->data, info); - - if (card->u.x.logging) - printk(KERN_INFO "\n%s: X.25 incoming call on LCN %d!\n", - card->devname, new_lcn); - - /* Conver the first two ASCII characters into an - * interger. Used to check the incoming protocol - */ - user_data = hex_to_uint(info->user,2); - - /* Find available channel */ - for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { - chan = dev->priv; - - if (chan->common.usedby == API) - continue; - - if (!chan->common.svc || (chan->common.state != WAN_DISCONNECTED)) - continue; - - if (user_data == NLPID_IP && chan->protocol != htons(ETH_P_IP)){ - printk(KERN_INFO "IP packet but configured for IPX : %x, %x\n", - htons(chan->protocol), info->user[0]); - continue; - } - - if (user_data == NLPID_SNAP && chan->protocol != htons(ETH_P_IPX)){ - printk(KERN_INFO "IPX packet but configured for IP: %x\n", - htons(chan->protocol)); - continue; - } - if (strcmp(info->src, chan->addr) == 0) - break; - - /* If just an '@' is specified, accept all incoming calls */ - if (strcmp(chan->addr, "") == 0) - break; - } - - if (dev == NULL){ - - /* If the call is not for any WANPIPE interfaces - * check to see if there is an API listening queue - * waiting for data. If there is send the packet - * up the stack. - */ - if (card->sk != NULL && card->func != NULL){ - if (api_incoming_call(card,mb,new_lcn)){ - x25_clear_call(card, new_lcn, 0, 0); - } - accept = 0; - }else{ - printk(KERN_INFO "%s: no channels available!\n", - card->devname); - - x25_clear_call(card, new_lcn, 0, 0); - } - - }else if (info->nuser == 0){ - - printk(KERN_INFO - "%s: no user data in incoming call on LCN %d!\n", - card->devname, new_lcn) - ; - x25_clear_call(card, new_lcn, 0, 0); - - }else switch (info->user[0]){ - - case 0: /* multiplexed */ - chan->protocol = htons(0); - accept = 1; - break; - - case NLPID_IP: /* IP datagrams */ - accept = 1; - break; - - case NLPID_SNAP: /* IPX datagrams */ - accept = 1; - break; - - default: - printk(KERN_INFO - "%s: unsupported NLPID 0x%02X in incoming call " - "on LCN %d!\n", card->devname, info->user[0], new_lcn); - x25_clear_call(card, new_lcn, 0, 249); - } - - if (accept && (x25_accept_call(card, new_lcn, 0) == CMD_OK)){ - - bind_lcn_to_dev (card, chan->dev, new_lcn); - - if (x25_get_chan_conf(card, chan) == CMD_OK) - set_chan_state(dev, WAN_CONNECTED); - else - x25_clear_call(card, new_lcn, 0, 0); - } - kfree(info); - return 1; -} - -/*==================================================================== - * Handle accepted call. - *====================================================================*/ - -static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) -{ - unsigned new_lcn = mb->cmd.lcn; - struct net_device* dev = find_channel(card, new_lcn); - x25_channel_t* chan; - - if (dev == NULL){ - printk(KERN_INFO - "%s: clearing orphaned connection on LCN %d!\n", - card->devname, new_lcn); - x25_clear_call(card, new_lcn, 0, 0); - return 1; - } - - if (card->u.x.logging) - printk(KERN_INFO "%s: X.25 call accepted on Dev %s and LCN %d!\n", - card->devname, dev->name, new_lcn); - - /* Get channel configuration and notify router */ - chan = dev->priv; - if (x25_get_chan_conf(card, chan) != CMD_OK) - { - x25_clear_call(card, new_lcn, 0, 0); - return 1; - } - - set_chan_state(dev, WAN_CONNECTED); - - if (chan->common.usedby == API){ - send_delayed_cmd_result(card,dev,mb); - bind_lcn_to_dev (card, dev, new_lcn); - } - - return 1; -} - -/*==================================================================== - * Handle cleared call. - *====================================================================*/ - -static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) -{ - unsigned new_lcn = mb->cmd.lcn; - struct net_device* dev = find_channel(card, new_lcn); - x25_channel_t *chan; - unsigned char old_state; - - if (card->u.x.logging){ - printk(KERN_INFO "%s: X.25 clear request on LCN %d! Cause:0x%02X " - "Diagn:0x%02X\n", - card->devname, new_lcn, mb->cmd.cause, mb->cmd.diagn); - } - - if (dev == NULL){ - printk(KERN_INFO "%s: X.25 clear request : No device for clear\n", - card->devname); - return 1; - } - - chan=dev->priv; - - old_state = chan->common.state; - - set_chan_state(dev, WAN_DISCONNECTED); - - if (chan->common.usedby == API){ - - switch (old_state){ - - case WAN_CONNECTING: - send_delayed_cmd_result(card,dev,mb); - break; - case WAN_CONNECTED: - send_oob_msg(card,dev,mb); - break; - } - } - - return ((cmd == X25_WRITE) && (lcn == new_lcn)) ? 0 : 1; -} - -/*==================================================================== - * Handle X.25 restart event. - *====================================================================*/ - -static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) -{ - struct wan_device* wandev = &card->wandev; - struct net_device* dev; - x25_channel_t *chan; - unsigned char old_state; - - printk(KERN_INFO - "%s: X.25 restart request! Cause:0x%02X Diagn:0x%02X\n", - card->devname, mb->cmd.cause, mb->cmd.diagn); - - /* down all logical channels */ - for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { - chan=dev->priv; - old_state = chan->common.state; - - set_chan_state(dev, WAN_DISCONNECTED); - - if (chan->common.usedby == API){ - switch (old_state){ - - case WAN_CONNECTING: - send_delayed_cmd_result(card,dev,mb); - break; - case WAN_CONNECTED: - send_oob_msg(card,dev,mb); - break; - } - } - } - return (cmd == X25_WRITE) ? 0 : 1; -} - -/*==================================================================== - * Handle timeout event. - *====================================================================*/ - -static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) -{ - unsigned new_lcn = mb->cmd.lcn; - - if (mb->cmd.pktType == 0x05) /* call request time out */ - { - struct net_device* dev = find_channel(card,new_lcn); - - printk(KERN_INFO "%s: X.25 call timed timeout on LCN %d!\n", - card->devname, new_lcn); - - if (dev){ - x25_channel_t *chan = dev->priv; - set_chan_state(dev, WAN_DISCONNECTED); - - if (chan->common.usedby == API){ - send_delayed_cmd_result(card,dev,card->mbox); - } - } - }else{ - printk(KERN_INFO "%s: X.25 packet 0x%02X timeout on LCN %d!\n", - card->devname, mb->cmd.pktType, new_lcn); - } - return 1; -} - -/* - * Miscellaneous - */ - -/*==================================================================== - * Establish physical connection. - * o open HDLC and raise DTR - * - * Return: 0 connection established - * 1 connection is in progress - * <0 error - *===================================================================*/ - -static int connect (sdla_t* card) -{ - TX25Status* status = card->flags; - - if (x25_open_hdlc(card) || x25_setup_hdlc(card)) - return -EIO; - - wanpipe_set_state(card, WAN_CONNECTING); - - x25_set_intr_mode(card, INTR_ON_TIMER); - status->imask &= ~INTR_ON_TIMER; - - return 1; -} - -/* - * Tear down physical connection. - * o close HDLC link - * o drop DTR - * - * Return: 0 - * <0 error - */ - -static int disconnect (sdla_t* card) -{ - wanpipe_set_state(card, WAN_DISCONNECTED); - x25_set_intr_mode(card, INTR_ON_TIMER); /* disable all interrupt except timer */ - x25_close_hdlc(card); /* close HDLC link */ - x25_set_dtr(card, 0); /* drop DTR */ - return 0; -} - -/* - * Find network device by its channel number. - */ - -static struct net_device* get_dev_by_lcn(struct wan_device* wandev, - unsigned lcn) -{ - struct net_device* dev; - - for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) - if (((x25_channel_t*)dev->priv)->common.lcn == lcn) - break; - return dev; -} - -/* - * Initiate connection on the logical channel. - * o for PVC we just get channel configuration - * o for SVCs place an X.25 call - * - * Return: 0 connected - * >0 connection in progress - * <0 failure - */ - -static int chan_connect(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - - if (chan->common.svc && chan->common.usedby == WANPIPE){ - if (!chan->addr[0]){ - printk(KERN_INFO "%s: No Destination Address\n", - card->devname); - return -EINVAL; /* no destination address */ - } - printk(KERN_INFO "%s: placing X.25 call to %s ...\n", - card->devname, chan->addr); - - if (x25_place_call(card, chan) != CMD_OK) - return -EIO; - - set_chan_state(dev, WAN_CONNECTING); - return 1; - }else{ - if (x25_get_chan_conf(card, chan) != CMD_OK) - return -EIO; - - set_chan_state(dev, WAN_CONNECTED); - } - return 0; -} - -/* - * Disconnect logical channel. - * o if SVC then clear X.25 call - */ - -static int chan_disc(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - - if (chan->common.svc){ - x25_clear_call(chan->card, chan->common.lcn, 0, 0); - - /* For API we disconnect on clear - * confirmation. - */ - if (chan->common.usedby == API) - return 0; - } - - set_chan_state(dev, WAN_DISCONNECTED); - - return 0; -} - -/* - * Set logical channel state. - */ - -static void set_chan_state(struct net_device* dev, int state) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - unsigned long flags; - - save_flags(flags); - cli(); - if (chan->common.state != state) - { - switch (state) - { - case WAN_CONNECTED: - if (card->u.x.logging){ - printk (KERN_INFO - "%s: interface %s connected, lcn %i !\n", - card->devname, dev->name,chan->common.lcn); - } - *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); - chan->i_timeout_sofar = jiffies; - - /* LAPB is PVC Based */ - if (card->u.x.LAPB_hdlc) - chan->common.svc=0; - break; - - case WAN_CONNECTING: - if (card->u.x.logging){ - printk (KERN_INFO - "%s: interface %s connecting, lcn %i ...\n", - card->devname, dev->name, chan->common.lcn); - } - break; - - case WAN_DISCONNECTED: - if (card->u.x.logging){ - printk (KERN_INFO - "%s: interface %s disconnected, lcn %i !\n", - card->devname, dev->name,chan->common.lcn); - } - atomic_set(&chan->common.disconnect,0); - - if (chan->common.svc) { - *(unsigned short*)dev->dev_addr = 0; - card->u.x.svc_to_dev_map[(chan->common.lcn%X25_MAX_CHAN)]=NULL; - chan->common.lcn = 0; - } - - if (chan->transmit_length){ - chan->transmit_length=0; - atomic_set(&chan->common.driver_busy,0); - chan->tx_offset=0; - if (netif_queue_stopped(dev)){ - netif_wake_queue(dev); - } - } - atomic_set(&chan->common.command,0); - break; - - case WAN_DISCONNECTING: - if (card->u.x.logging){ - printk (KERN_INFO - "\n%s: interface %s disconnecting, lcn %i ...\n", - card->devname, dev->name,chan->common.lcn); - } - atomic_set(&chan->common.disconnect,0); - break; - } - chan->common.state = state; - } - chan->state_tick = jiffies; - restore_flags(flags); -} - -/* - * Send packet on a logical channel. - * When this function is called, tx_skb field of the channel data - * space points to the transmit socket buffer. When transmission - * is complete, release socket buffer and reset 'tbusy' flag. - * - * Return: 0 - transmission complete - * 1 - busy - * - * Notes: - * 1. If packet length is greater than MTU for this channel, we'll fragment - * the packet into 'complete sequence' using M-bit. - * 2. When transmission is complete, an event notification should be issued - * to the router. - */ - -static int chan_send(struct net_device* dev, void* buff, unsigned data_len, - unsigned char tx_intr) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - TX25Status* status = card->flags; - unsigned len=0, qdm=0, res=0, orig_len = 0; - void *data; - - /* Check to see if channel is ready */ - if ((!(status->cflags[chan->ch_idx] & 0x40) && !card->u.x.LAPB_hdlc) || - !(*card->u.x.hdlc_buf_status & 0x40)){ - - if (!tx_intr){ - setup_for_delayed_transmit (dev, buff, data_len); - return 0; - }else{ - /* By returning 0 to tx_intr the packet will be dropped */ - ++card->wandev.stats.tx_dropped; - ++chan->ifstats.tx_dropped; - printk(KERN_INFO "%s: ERROR, Tx intr could not send, dropping %s:\n", - card->devname,dev->name); - ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; - return 0; - } - } - - if (chan->common.usedby == API){ - /* Remove the API Header */ - x25api_hdr_t *api_data = (x25api_hdr_t *)buff; - - /* Set the qdm bits from the packet header - * User has the option to set the qdm bits - */ - qdm = api_data->qdm; - - orig_len = len = data_len - sizeof(x25api_hdr_t); - data = (unsigned char*)buff + sizeof(x25api_hdr_t); - }else{ - data = buff; - orig_len = len = data_len; - } - - if (tx_intr){ - /* We are in tx_intr, minus the tx_offset from - * the total length. The tx_offset part of the - * data has already been sent. Also, move the - * data pointer to proper offset location. - */ - len -= chan->tx_offset; - data = (unsigned char*)data + chan->tx_offset; - } - - /* Check if the packet length is greater than MTU - * If YES: Cut the len to MTU and set the M bit - */ - if (len > chan->tx_pkt_size && !card->u.x.LAPB_hdlc){ - len = chan->tx_pkt_size; - qdm |= M_BIT; - } - - - /* Pass only first three bits of the qdm byte to the send - * routine. In case user sets any other bit which might - * cause errors. - */ - - switch(x25_send(card, chan->common.lcn, (qdm&0x07), len, data)){ - case 0x00: /* success */ - chan->i_timeout_sofar = jiffies; - - dev->trans_start=jiffies; - - if ((qdm & M_BIT) && !card->u.x.LAPB_hdlc){ - if (!tx_intr){ - /* The M bit was set, which means that part of the - * packet has been sent. Copy the packet into a buffer - * and set the offset to len, so on next tx_inter - * the packet will be sent using the below offset. - */ - chan->tx_offset += len; - - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - - if (chan->tx_offset < orig_len){ - setup_for_delayed_transmit (dev, buff, data_len); - } - res=0; - }else{ - /* We are already in tx_inter, thus data is already - * in the buffer. Update the offset and wait for - * next tx_intr. We add on to the offset, since data can - * be X number of times larger than max data size. - */ - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - - ++chan->if_send_stat.if_send_bfr_passed_to_adptr; - chan->tx_offset += len; - - /* The user can set the qdm bit as well. - * If the entire packet was sent and qdm is still - * set, than it's the user who has set the M bit. In that, - * case indicate that the packet was send by returning - * 0 and wait for a new packet. Otherwise, wait for next - * tx interrupt to send the rest of the packet */ - - if (chan->tx_offset < orig_len){ - res=1; - }else{ - res=0; - } - } - }else{ - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - ++chan->if_send_stat.if_send_bfr_passed_to_adptr; - res=0; - } - break; - - case 0x33: /* Tx busy */ - if (tx_intr){ - printk(KERN_INFO "%s: Tx_intr: Big Error dropping packet %s\n", - card->devname,dev->name); - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; - res=0; - }else{ - DBG_PRINTK(KERN_INFO - "%s: Send: Big Error should have tx: storring %s\n", - card->devname,dev->name); - setup_for_delayed_transmit (dev, buff, data_len); - res=1; - } - break; - - default: /* failure */ - ++chan->ifstats.tx_errors; - if (tx_intr){ - printk(KERN_INFO "%s: Tx_intr: Failure to send, dropping %s\n", - card->devname,dev->name); - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; - res=0; - }else{ - DBG_PRINTK(KERN_INFO "%s: Send: Failure to send !!!, storing %s\n", - card->devname,dev->name); - setup_for_delayed_transmit (dev, buff, data_len); - res=1; - } - break; - } - return res; -} - - -/* - * Parse X.25 call request data and fill x25_call_info_t structure. - */ - -static void parse_call_info (unsigned char* str, x25_call_info_t* info) -{ - memset(info, 0, sizeof(x25_call_info_t)); - for (; *str; ++str) - { - int i; - unsigned char ch; - - if (*str == '-') switch (str[1]) { - - /* Take minus 2 off the maximum size so that - * last byte is 0. This way we can use string - * manipulaton functions on call information. - */ - - case 'd': /* destination address */ - for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ - ch = str[2+i]; - if (isspace(ch)) break; - info->dest[i] = ch; - } - break; - - case 's': /* source address */ - for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ - ch = str[2+i]; - if (isspace(ch)) break; - info->src[i] = ch; - } - break; - - case 'u': /* user data */ - for (i = 0; i < (MAX_X25_DATA_SIZE-2); ++i){ - ch = str[2+i]; - if (isspace(ch)) break; - info->user[i] = ch; - } - info->nuser = i; - break; - - case 'f': /* facilities */ - for (i = 0; i < (MAX_X25_FACL_SIZE-2); ++i){ - ch = str[2+i]; - if (isspace(ch)) break; - info->facil[i] = ch; - } - info->nfacil = i; - break; - } - } -} - -/* - * Convert line speed in bps to a number used by S502 code. - */ - -static unsigned char bps_to_speed_code (unsigned long bps) -{ - unsigned char number; - - if (bps <= 1200) number = 0x01; - else if (bps <= 2400) number = 0x02; - else if (bps <= 4800) number = 0x03; - else if (bps <= 9600) number = 0x04; - else if (bps <= 19200) number = 0x05; - else if (bps <= 38400) number = 0x06; - else if (bps <= 45000) number = 0x07; - else if (bps <= 56000) number = 0x08; - else if (bps <= 64000) number = 0x09; - else if (bps <= 74000) number = 0x0A; - else if (bps <= 112000) number = 0x0B; - else if (bps <= 128000) number = 0x0C; - else number = 0x0D; - - return number; -} - -/* - * Convert decimal string to unsigned integer. - * If len != 0 then only 'len' characters of the string are converted. - */ - -static unsigned int dec_to_uint (unsigned char* str, int len) -{ - unsigned val; - - if (!len) - len = strlen(str); - - for (val = 0; len && isdigit(*str); ++str, --len) - val = (val * 10) + (*str - (unsigned)'0'); - - return val; -} - -/* - * Convert hex string to unsigned integer. - * If len != 0 then only 'len' characters of the string are conferted. - */ - -static unsigned int hex_to_uint (unsigned char* str, int len) -{ - unsigned val, ch; - - if (!len) - len = strlen(str); - - for (val = 0; len; ++str, --len) - { - ch = *str; - if (isdigit(ch)) - val = (val << 4) + (ch - (unsigned)'0'); - else if (isxdigit(ch)) - val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10); - else break; - } - return val; -} - - -static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_IPX, unsigned long network_number, unsigned short proto) -{ - int i; - - if( proto == ETH_P_IPX) { - /* It's an IPX packet */ - if(!enable_IPX) { - /* Return 1 so we don't pass it up the stack. */ - return 1; - } - } else { - /* It's not IPX so pass it up the stack.*/ - return 0; - } - - if( sendpacket[16] == 0x90 && - sendpacket[17] == 0x04) - { - /* It's IPXWAN */ - - if( sendpacket[2] == 0x02 && - sendpacket[34] == 0x00) - { - /* It's a timer request packet */ - printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",devname); - - /* Go through the routing options and answer no to every - * option except Unnumbered RIP/SAP - */ - for(i = 41; sendpacket[i] == 0x00; i += 5) - { - /* 0x02 is the option for Unnumbered RIP/SAP */ - if( sendpacket[i + 4] != 0x02) - { - sendpacket[i + 1] = 0; - } - } - - /* Skip over the extended Node ID option */ - if( sendpacket[i] == 0x04 ) - { - i += 8; - } - - /* We also want to turn off all header compression opt. */ - for(; sendpacket[i] == 0x80 ;) - { - sendpacket[i + 1] = 0; - i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4; - } - - /* Set the packet type to timer response */ - sendpacket[34] = 0x01; - - printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",devname); - } - else if( sendpacket[34] == 0x02 ) - { - /* This is an information request packet */ - printk(KERN_INFO "%s: Received IPXWAN Information Request packet\n",devname); - - /* Set the packet type to information response */ - sendpacket[34] = 0x03; - - /* Set the router name */ - sendpacket[51] = 'X'; - sendpacket[52] = 'T'; - sendpacket[53] = 'P'; - sendpacket[54] = 'I'; - sendpacket[55] = 'P'; - sendpacket[56] = 'E'; - sendpacket[57] = '-'; - sendpacket[58] = CVHexToAscii(network_number >> 28); - sendpacket[59] = CVHexToAscii((network_number & 0x0F000000)>> 24); - sendpacket[60] = CVHexToAscii((network_number & 0x00F00000)>> 20); - sendpacket[61] = CVHexToAscii((network_number & 0x000F0000)>> 16); - sendpacket[62] = CVHexToAscii((network_number & 0x0000F000)>> 12); - sendpacket[63] = CVHexToAscii((network_number & 0x00000F00)>> 8); - sendpacket[64] = CVHexToAscii((network_number & 0x000000F0)>> 4); - sendpacket[65] = CVHexToAscii(network_number & 0x0000000F); - for(i = 66; i < 99; i+= 1) - { - sendpacket[i] = 0; - } - - printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",devname); - } - else - { - printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname); - return 0; - } - - /* Set the WNodeID to our network address */ - sendpacket[35] = (unsigned char)(network_number >> 24); - sendpacket[36] = (unsigned char)((network_number & 0x00FF0000) >> 16); - sendpacket[37] = (unsigned char)((network_number & 0x0000FF00) >> 8); - sendpacket[38] = (unsigned char)(network_number & 0x000000FF); - - return 1; - } else { - /*If we get here it's an IPX-data packet, so it'll get passed up the stack. - */ - /* switch the network numbers */ - switch_net_numbers(sendpacket, network_number, 1); - return 0; - } -} - -/* - * If incoming is 0 (outgoing)- if the net numbers is ours make it 0 - * if incoming is 1 - if the net number is 0 make it ours - */ - -static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming) -{ - unsigned long pnetwork_number; - - pnetwork_number = (unsigned long)((sendpacket[6] << 24) + - (sendpacket[7] << 16) + (sendpacket[8] << 8) + - sendpacket[9]); - - - if (!incoming) { - /*If the destination network number is ours, make it 0 */ - if( pnetwork_number == network_number) { - sendpacket[6] = sendpacket[7] = sendpacket[8] = - sendpacket[9] = 0x00; - } - } else { - /* If the incoming network is 0, make it ours */ - if( pnetwork_number == 0) { - sendpacket[6] = (unsigned char)(network_number >> 24); - sendpacket[7] = (unsigned char)((network_number & - 0x00FF0000) >> 16); - sendpacket[8] = (unsigned char)((network_number & - 0x0000FF00) >> 8); - sendpacket[9] = (unsigned char)(network_number & - 0x000000FF); - } - } - - - pnetwork_number = (unsigned long)((sendpacket[18] << 24) + - (sendpacket[19] << 16) + (sendpacket[20] << 8) + - sendpacket[21]); - - - if( !incoming ) { - /* If the source network is ours, make it 0 */ - if( pnetwork_number == network_number) { - sendpacket[18] = sendpacket[19] = sendpacket[20] = - sendpacket[21] = 0x00; - } - } else { - /* If the source network is 0, make it ours */ - if( pnetwork_number == 0 ) { - sendpacket[18] = (unsigned char)(network_number >> 24); - sendpacket[19] = (unsigned char)((network_number & - 0x00FF0000) >> 16); - sendpacket[20] = (unsigned char)((network_number & - 0x0000FF00) >> 8); - sendpacket[21] = (unsigned char)(network_number & - 0x000000FF); - } - } -} /* switch_net_numbers */ - - - - -/********************* X25API SPECIFIC FUNCTIONS ****************/ - - -/*=============================================================== - * find_channel - * - * Manages the lcn to device map. It increases performance - * because it eliminates the need to search through the link - * list for a device which is bounded to a specific lcn. - * - *===============================================================*/ - - -struct net_device *find_channel(sdla_t *card, unsigned lcn) -{ - if (card->u.x.LAPB_hdlc){ - - return card->wandev.dev; - - }else{ - /* We don't know whether the incoming lcn - * is a PVC or an SVC channel. But we do know that - * the lcn cannot be for both the PVC and the SVC - * channel. - - * If the lcn number is greater or equal to 255, - * take the modulo 255 of that number. We only have - * 255 locations, thus higher numbers must be mapped - * to a number between 0 and 245. - - * We must separate pvc's and svc's since two don't - * have to be contiguous. Meaning pvc's can start - * from 1 to 10 and svc's can start from 256 to 266. - * But 256%255 is 1, i.e. CONFLICT. - */ - - - /* Highest LCN number must be less or equal to 4096 */ - if ((lcn <= MAX_LCN_NUM) && (lcn > 0)){ - - if (lcn < X25_MAX_CHAN){ - if (card->u.x.svc_to_dev_map[lcn]) - return card->u.x.svc_to_dev_map[lcn]; - - if (card->u.x.pvc_to_dev_map[lcn]) - return card->u.x.pvc_to_dev_map[lcn]; - - }else{ - int new_lcn = lcn%X25_MAX_CHAN; - if (card->u.x.svc_to_dev_map[new_lcn]) - return card->u.x.svc_to_dev_map[new_lcn]; - - if (card->u.x.pvc_to_dev_map[new_lcn]) - return card->u.x.pvc_to_dev_map[new_lcn]; - } - } - return NULL; - } -} - -void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn) -{ - x25_channel_t *chan = dev->priv; - - /* Modulo the lcn number by X25_MAX_CHAN (255) - * because the lcn number can be greater than 255 - * - * We need to split svc and pvc since they don't have - * to be contigous. - */ - - if (chan->common.svc){ - card->u.x.svc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; - }else{ - card->u.x.pvc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; - } - chan->common.lcn = lcn; -} - - - -/*=============================================================== - * x25api_bh - * - * - *==============================================================*/ - -static void x25api_bh(struct net_device* dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - struct sk_buff *skb; - - if (atomic_read(&chan->bh_buff_used) == 0){ - printk(KERN_INFO "%s: BH Buffer Empty in BH\n", - card->devname); - clear_bit(0, &chan->tq_working); - return; - } - - while (atomic_read(&chan->bh_buff_used)){ - - /* If the sock is in the process of unlinking the - * driver from the socket, we must get out. - * This never happends but is a sanity check. */ - if (test_bit(0,&chan->common.common_critical)){ - clear_bit(0, &chan->tq_working); - return; - } - - /* If LAPB HDLC, do not drop packets if socket is - * not connected. Let the buffer fill up and - * turn off rx interrupt */ - if (card->u.x.LAPB_hdlc){ - if (chan->common.sk == NULL || chan->common.func == NULL){ - clear_bit(0, &chan->tq_working); - return; - } - } - - skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; - - if (skb == NULL){ - printk(KERN_INFO "%s: BH Skb empty for read %i\n", - card->devname,chan->bh_read); - }else{ - - if (chan->common.sk == NULL || chan->common.func == NULL){ - printk(KERN_INFO "%s: BH: Socket disconnected, dropping\n", - card->devname); - dev_kfree_skb_any(skb); - x25api_bh_cleanup(dev); - ++chan->ifstats.rx_dropped; - ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; - continue; - } - - - if (chan->common.func(skb,dev,chan->common.sk) != 0){ - /* Sock full cannot send, queue us for another - * try - */ - printk(KERN_INFO "%s: BH: !!! Packet failed to send !!!!! \n", - card->devname); - atomic_set(&chan->common.receive_block,1); - return; - }else{ - x25api_bh_cleanup(dev); - ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; - } - } - } - clear_bit(0, &chan->tq_working); - - return; -} - -/*=============================================================== - * x25api_bh_cleanup - * - * - *==============================================================*/ - -static int x25api_bh_cleanup(struct net_device *dev) -{ - x25_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - TX25Status* status = card->flags; - - - ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; - - if (chan->bh_read == MAX_BH_BUFF){ - chan->bh_read=0; - }else{ - ++chan->bh_read; - } - - /* If the Receive interrupt was off, it means - * that we filled up our circular buffer. Check - * that we have space in the buffer. If so - * turn the RX interrupt back on. - */ - if (!(status->imask & INTR_ON_RX_FRAME)){ - if (atomic_read(&chan->bh_buff_used) < (MAX_BH_BUFF+1)){ - printk(KERN_INFO "%s: BH: Turning on the interrupt\n", - card->devname); - status->imask |= INTR_ON_RX_FRAME; - } - } - - atomic_dec(&chan->bh_buff_used); - return 0; -} - - -/*=============================================================== - * bh_enqueue - * - * - *==============================================================*/ - -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) -{ - x25_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - TX25Status* status = card->flags; - - if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ - printk(KERN_INFO "%s: Bottom half buffer FULL\n", - card->devname); - return 1; - } - - ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; - - if (chan->bh_write == MAX_BH_BUFF){ - chan->bh_write=0; - }else{ - ++chan->bh_write; - } - - atomic_inc(&chan->bh_buff_used); - - if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ - printk(KERN_INFO "%s: Buffer is now full, Turning off RX Intr\n", - card->devname); - status->imask &= ~INTR_ON_RX_FRAME; - } - - return 0; -} - - -/*=============================================================== - * timer_intr_cmd_exec - * - * Called by timer interrupt to execute a command - *===============================================================*/ - -static int timer_intr_cmd_exec (sdla_t* card) -{ - struct net_device *dev; - unsigned char more_to_exec=0; - volatile x25_channel_t *chan=NULL; - int i=0,bad_cmd=0,err=0; - - if (card->u.x.cmd_dev == NULL){ - card->u.x.cmd_dev = card->wandev.dev; - } - - dev = card->u.x.cmd_dev; - - for (;;){ - - chan = dev->priv; - - if (atomic_read(&chan->common.command)){ - - bad_cmd = check_bad_command(card,dev); - - if ((!chan->common.mbox || atomic_read(&chan->common.disconnect)) && - !bad_cmd){ - - /* Socket has died or exited, We must bring the - * channel down before anybody else tries to - * use it */ - err = channel_disconnect(card,dev); - }else{ - err = execute_delayed_cmd(card, dev, - (mbox_cmd_t*)chan->common.mbox, - bad_cmd); - } - - switch (err){ - - case RETURN_RESULT: - - /* Return the result to the socket without - * delay. NO_WAIT Command */ - atomic_set(&chan->common.command,0); - if (atomic_read(&card->u.x.command_busy)) - atomic_set(&card->u.x.command_busy,0); - - send_delayed_cmd_result(card,dev,card->mbox); - - more_to_exec=0; - break; - case DELAY_RESULT: - - /* Wait for the remote to respond, before - * sending the result up to the socket. - * WAIT command */ - if (atomic_read(&card->u.x.command_busy)) - atomic_set(&card->u.x.command_busy,0); - - atomic_set(&chan->common.command,0); - more_to_exec=0; - break; - default: - - /* If command could not be executed for - * some reason (i.e return code 0x33 busy) - * set the more_to_exec bit which will - * indicate that this command must be exectued - * again during next timer interrupt - */ - more_to_exec=1; - if (atomic_read(&card->u.x.command_busy) == 0) - atomic_set(&card->u.x.command_busy,1); - break; - } - - bad_cmd=0; - - /* If flags is set, there are no hdlc buffers, - * thus, wait for the next pass and try the - * same command again. Otherwise, start searching - * from next device on the next pass. - */ - if (!more_to_exec){ - dev = move_dev_to_next(card,dev); - } - break; - }else{ - /* This device has nothing to execute, - * go to next. - */ - if (atomic_read(&card->u.x.command_busy)) - atomic_set(&card->u.x.command_busy,0); - dev = move_dev_to_next(card,dev); - } - - if (++i == card->u.x.no_dev){ - if (!more_to_exec){ - DBG_PRINTK(KERN_INFO "%s: Nothing to execute in Timer\n", - card->devname); - if (atomic_read(&card->u.x.command_busy)){ - atomic_set(&card->u.x.command_busy,0); - } - } - break; - } - - } //End of FOR - - card->u.x.cmd_dev = dev; - - if (more_to_exec){ - /* If more commands are pending, do not turn off timer - * interrupt */ - return 1; - }else{ - /* No more commands, turn off timer interrupt */ - return 0; - } -} - -/*=============================================================== - * execute_delayed_cmd - * - * Execute an API command which was passed down from the - * sock. Sock is very limited in which commands it can - * execute. Wait and No Wait commands are supported. - * Place Call, Clear Call and Reset wait commands, where - * Accept Call is a no_wait command. - * - *===============================================================*/ - -static int execute_delayed_cmd(sdla_t* card, struct net_device *dev, - mbox_cmd_t *usr_cmd, char bad_cmd) -{ - TX25Mbox* mbox = card->mbox; - int err; - x25_channel_t *chan = dev->priv; - int delay=RETURN_RESULT; - - if (!(*card->u.x.hdlc_buf_status & 0x40) && !bad_cmd){ - return TRY_CMD_AGAIN; - } - - /* This way a command is guaranteed to be executed for - * a specific lcn, the network interface is bound to. */ - usr_cmd->cmd.lcn = chan->common.lcn; - - - /* If channel is pvc, instead of place call - * run x25_channel configuration. If running LAPB HDLC - * enable communications. - */ - if ((!chan->common.svc) && (usr_cmd->cmd.command == X25_PLACE_CALL)){ - - if (card->u.x.LAPB_hdlc){ - DBG_PRINTK(KERN_INFO "LAPB: Connecting\n"); - connect(card); - set_chan_state(dev,WAN_CONNECTING); - return DELAY_RESULT; - }else{ - DBG_PRINTK(KERN_INFO "%s: PVC is CONNECTING\n",card->devname); - if (x25_get_chan_conf(card, chan) == CMD_OK){ - set_chan_state(dev, WAN_CONNECTED); - }else{ - set_chan_state(dev, WAN_DISCONNECTED); - } - return RETURN_RESULT; - } - } - - /* Copy the socket mbox command onto the board */ - - memcpy(&mbox->cmd, &usr_cmd->cmd, sizeof(TX25Cmd)); - if (usr_cmd->cmd.length){ - memcpy(mbox->data, usr_cmd->data, usr_cmd->cmd.length); - } - - /* Check if command is bad. We need to copy the cmd into - * the buffer regardless since we return the, mbox to - * the user */ - if (bad_cmd){ - mbox->cmd.result=0x01; - return RETURN_RESULT; - } - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - if (err != CMD_OK && err != X25RES_NOT_READY) - x25_error(card, err, usr_cmd->cmd.command, usr_cmd->cmd.lcn); - - if (mbox->cmd.result == X25RES_NOT_READY){ - return TRY_CMD_AGAIN; - } - - switch (mbox->cmd.command){ - - case X25_PLACE_CALL: - - switch (mbox->cmd.result){ - - case CMD_OK: - - /* Check if Place call is a wait command or a - * no wait command */ - if (atomic_read(&chan->common.command) & 0x80) - delay=RETURN_RESULT; - else - delay=DELAY_RESULT; - - - DBG_PRINTK(KERN_INFO "\n%s: PLACE CALL Binding dev %s to lcn %i\n", - card->devname,dev->name, mbox->cmd.lcn); - - bind_lcn_to_dev (card, dev, mbox->cmd.lcn); - set_chan_state(dev, WAN_CONNECTING); - break; - - - default: - delay=RETURN_RESULT; - set_chan_state(dev, WAN_DISCONNECTED); - break; - } - break; - - case X25_ACCEPT_CALL: - - switch (mbox->cmd.result){ - - case CMD_OK: - - DBG_PRINTK(KERN_INFO "\n%s: ACCEPT Binding dev %s to lcn %i\n", - card->devname,dev->name,mbox->cmd.lcn); - - bind_lcn_to_dev (card, dev, mbox->cmd.lcn); - - if (x25_get_chan_conf(card, chan) == CMD_OK){ - - set_chan_state(dev, WAN_CONNECTED); - delay=RETURN_RESULT; - - }else{ - if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ - /* if clear is successful, wait for clear confirm - */ - delay=DELAY_RESULT; - }else{ - /* Do not change the state here. If we fail - * the accept the return code is send up - *the stack, which will ether retry - * or clear the call - */ - DBG_PRINTK(KERN_INFO - "%s: ACCEPT: STATE MAY BE CURRUPTED 2 !!!!!\n", - card->devname); - delay=RETURN_RESULT; - } - } - break; - - - case X25RES_ASYNC_PACKET: - delay=TRY_CMD_AGAIN; - break; - - default: - DBG_PRINTK(KERN_INFO "%s: ACCEPT FAILED\n",card->devname); - if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ - delay=DELAY_RESULT; - }else{ - /* Do not change the state here. If we fail the accept. The - * return code is send up the stack, which will ether retry - * or clear the call */ - DBG_PRINTK(KERN_INFO - "%s: ACCEPT: STATE MAY BE CORRUPTED 1 !!!!!\n", - card->devname); - delay=RETURN_RESULT; - } - } - break; - - case X25_CLEAR_CALL: - - switch (mbox->cmd.result){ - - case CMD_OK: - DBG_PRINTK(KERN_INFO - "CALL CLEAR OK: Dev %s Mbox Lcn %i Chan Lcn %i\n", - dev->name,mbox->cmd.lcn,chan->common.lcn); - set_chan_state(dev, WAN_DISCONNECTING); - delay = DELAY_RESULT; - break; - - case X25RES_CHANNEL_IN_USE: - case X25RES_ASYNC_PACKET: - delay = TRY_CMD_AGAIN; - break; - - case X25RES_LINK_NOT_IN_ABM: - case X25RES_INVAL_LCN: - case X25RES_INVAL_STATE: - set_chan_state(dev, WAN_DISCONNECTED); - delay = RETURN_RESULT; - break; - - default: - /* If command did not execute because of user - * fault, do not change the state. This will - * signal the socket that clear command failed. - * User can retry or close the socket. - * When socket gets killed, it will set the - * chan->disconnect which will signal - * driver to clear the call */ - printk(KERN_INFO "%s: Clear Command Failed, Rc %x\n", - card->devname,mbox->cmd.command); - delay = RETURN_RESULT; - } - break; - } - - return delay; -} - -/*=============================================================== - * api_incoming_call - * - * Pass an incoming call request up the listening - * sock. If the API sock is not listening reject the - * call. - * - *===============================================================*/ - -static int api_incoming_call (sdla_t* card, TX25Mbox *mbox, int lcn) -{ - struct sk_buff *skb; - int len = sizeof(TX25Cmd)+mbox->cmd.length; - - if (alloc_and_init_skb_buf(card, &skb, len)){ - printk(KERN_INFO "%s: API incoming call, no memory\n",card->devname); - return 1; - } - - memcpy(skb_put(skb,len),&mbox->cmd,len); - - skb->mac.raw = skb->data; - skb->protocol = htons(X25_PROT); - skb->pkt_type = WAN_PACKET_ASYNC; - - if (card->func(skb,card->sk) < 0){ - printk(KERN_INFO "%s: MAJOR ERROR: Failed to send up place call \n",card->devname); - dev_kfree_skb_any(skb); - return 1; - } - - return 0; -} - -/*=============================================================== - * send_delayed_cmd_result - * - * Wait commands like PLEACE CALL or CLEAR CALL must wait - * until the result arrives. This function passes - * the result to a waiting sock. - * - *===============================================================*/ -static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, - TX25Mbox* mbox) -{ - x25_channel_t *chan = dev->priv; - mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; - struct sk_buff *skb; - int len=sizeof(unsigned char); - - atomic_set(&chan->common.command,0); - - /* If the sock is in the process of unlinking the - * driver from the socket, we must get out. - * This never happends but is a sanity check. */ - if (test_bit(0,&chan->common.common_critical)){ - return; - } - - if (!usr_cmd || !chan->common.sk || !chan->common.func){ - DBG_PRINTK(KERN_INFO "Delay result: Sock not bounded sk: %u, func: %u, mbox: %u\n", - (unsigned int)chan->common.sk, - (unsigned int)chan->common.func, - (unsigned int)usr_cmd); - return; - } - - memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); - if (mbox->cmd.length > 0){ - memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); - } - - if (alloc_and_init_skb_buf(card,&skb,len)){ - printk(KERN_INFO "Delay result: No sock buffers\n"); - return; - } - - memcpy(skb_put(skb,len),&mbox->cmd.command,len); - - skb->mac.raw = skb->data; - skb->pkt_type = WAN_PACKET_CMD; - - chan->common.func(skb,dev,chan->common.sk); -} - -/*=============================================================== - * clear_confirm_event - * - * Pass the clear confirmation event up the sock. The - * API will disconnect only after the clear confirmation - * has been received. - * - * Depending on the state, clear confirmation could - * be an OOB event, or a result of an API command. - *===============================================================*/ - -static int clear_confirm_event (sdla_t *card, TX25Mbox* mb) -{ - struct net_device *dev; - x25_channel_t *chan; - unsigned char old_state; - - dev = find_channel(card,mb->cmd.lcn); - if (!dev){ - DBG_PRINTK(KERN_INFO "%s: *** GOT CLEAR BUT NO DEV %i\n", - card->devname,mb->cmd.lcn); - return 0; - } - - chan=dev->priv; - DBG_PRINTK(KERN_INFO "%s: GOT CLEAR CONFIRM %s: Mbox lcn %i Chan lcn %i\n", - card->devname, dev->name, mb->cmd.lcn, chan->common.lcn); - - /* If not API fall through to default. - * If API, send the result to a waiting - * socket. - */ - - old_state = chan->common.state; - set_chan_state(dev, WAN_DISCONNECTED); - - if (chan->common.usedby == API){ - switch (old_state) { - - case WAN_DISCONNECTING: - case WAN_CONNECTING: - send_delayed_cmd_result(card,dev,mb); - break; - case WAN_CONNECTED: - send_oob_msg(card,dev,mb); - break; - } - return 1; - } - - return 0; -} - -/*=============================================================== - * send_oob_msg - * - * Construct an NEM Message and pass it up the connected - * sock. If the sock is not bounded discard the NEM. - * - *===============================================================*/ - -static void send_oob_msg(sdla_t *card, struct net_device *dev, TX25Mbox *mbox) -{ - x25_channel_t *chan = dev->priv; - mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; - struct sk_buff *skb; - int len=sizeof(x25api_hdr_t)+mbox->cmd.length; - x25api_t *api_hdr; - - /* If the sock is in the process of unlinking the - * driver from the socket, we must get out. - * This never happends but is a sanity check. */ - if (test_bit(0,&chan->common.common_critical)){ - return; - } - - if (!usr_cmd || !chan->common.sk || !chan->common.func){ - DBG_PRINTK(KERN_INFO "OOB MSG: Sock not bounded\n"); - return; - } - - memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); - if (mbox->cmd.length > 0){ - memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); - } - - if (alloc_and_init_skb_buf(card,&skb,len)){ - printk(KERN_INFO "%s: OOB MSG: No sock buffers\n",card->devname); - return; - } - - api_hdr = (x25api_t*)skb_put(skb,len); - api_hdr->hdr.pktType = mbox->cmd.pktType & 0x7F; - api_hdr->hdr.qdm = mbox->cmd.qdm; - api_hdr->hdr.cause = mbox->cmd.cause; - api_hdr->hdr.diagn = mbox->cmd.diagn; - api_hdr->hdr.length = mbox->cmd.length; - api_hdr->hdr.result = mbox->cmd.result; - api_hdr->hdr.lcn = mbox->cmd.lcn; - - if (mbox->cmd.length > 0){ - memcpy(api_hdr->data,mbox->data,mbox->cmd.length); - } - - skb->mac.raw = skb->data; - skb->pkt_type = WAN_PACKET_ERR; - - if (chan->common.func(skb,dev,chan->common.sk) < 0){ - if (bh_enqueue(dev,skb)){ - printk(KERN_INFO "%s: Dropping OOB MSG\n",card->devname); - dev_kfree_skb_any(skb); - } - } - - DBG_PRINTK(KERN_INFO "%s: OOB MSG OK, %s, lcn %i\n", - card->devname, dev->name, mbox->cmd.lcn); -} - -/*=============================================================== - * alloc_and_init_skb_buf - * - * Allocate and initialize an skb buffer. - * - *===============================================================*/ - -static int alloc_and_init_skb_buf (sdla_t *card, struct sk_buff **skb, int len) -{ - struct sk_buff *new_skb = *skb; - - new_skb = dev_alloc_skb(len + X25_HRDHDR_SZ); - if (new_skb == NULL){ - printk(KERN_INFO "%s: no socket buffers available!\n", - card->devname); - return 1; - } - - if (skb_tailroom(new_skb) < len){ - /* No room for the packet. Call off the whole thing! */ - dev_kfree_skb_any(new_skb); - printk(KERN_INFO "%s: Listen: unexpectedly long packet sequence\n" - ,card->devname); - *skb = NULL; - return 1; - } - - *skb = new_skb; - return 0; - -} - -/*=============================================================== - * api_oob_event - * - * Send an OOB event up to the sock - * - *===============================================================*/ - -static void api_oob_event (sdla_t *card,TX25Mbox *mbox) -{ - struct net_device *dev = find_channel(card, mbox->cmd.lcn); - x25_channel_t *chan; - - if (!dev) - return; - - chan=dev->priv; - - if (chan->common.usedby == API) - send_oob_msg(card,dev,mbox); - -} - - - - -static int channel_disconnect(sdla_t* card, struct net_device *dev) -{ - - int err; - x25_channel_t *chan = dev->priv; - - DBG_PRINTK(KERN_INFO "%s: TIMER: %s, Device down disconnecting\n", - card->devname,dev->name); - - if (chan->common.svc){ - err = x25_clear_call(card,chan->common.lcn,0,0); - }else{ - /* If channel is PVC or LAPB HDLC, there is no call - * to be cleared, thus drop down to the default - * area - */ - err = 1; - } - - switch (err){ - - case X25RES_CHANNEL_IN_USE: - case X25RES_NOT_READY: - err = TRY_CMD_AGAIN; - break; - case CMD_OK: - DBG_PRINTK(KERN_INFO "CALL CLEAR OK: Dev %s Chan Lcn %i\n", - dev->name,chan->common.lcn); - - set_chan_state(dev,WAN_DISCONNECTING); - atomic_set(&chan->common.command,0); - err = DELAY_RESULT; - break; - default: - /* If LAPB HDLC protocol, bring the whole link down - * once the application terminates - */ - - set_chan_state(dev,WAN_DISCONNECTED); - - if (card->u.x.LAPB_hdlc){ - DBG_PRINTK(KERN_INFO "LAPB: Disconnecting Link\n"); - hdlc_link_down (card); - } - atomic_set(&chan->common.command,0); - err = RETURN_RESULT; - break; - } - - return err; -} - -static void hdlc_link_down (sdla_t *card) -{ - TX25Mbox* mbox = card->mbox; - int retry = 5; - int err=0; - - do { - memset(mbox,0,sizeof(TX25Mbox)); - mbox->cmd.command = X25_HDLC_LINK_DISC; - mbox->cmd.length = 1; - mbox->data[0]=0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_DISC, 0)); - - if (err) - printk(KERN_INFO "%s: Hdlc Link Down Failed %x\n",card->devname,err); - - disconnect (card); - -} - -static int check_bad_command(sdla_t* card, struct net_device *dev) -{ - x25_channel_t *chan = dev->priv; - int bad_cmd = 0; - - switch (atomic_read(&chan->common.command)&0x7F){ - - case X25_PLACE_CALL: - if (chan->common.state != WAN_DISCONNECTED) - bad_cmd=1; - break; - case X25_CLEAR_CALL: - if (chan->common.state == WAN_DISCONNECTED) - bad_cmd=1; - break; - case X25_ACCEPT_CALL: - if (chan->common.state != WAN_CONNECTING) - bad_cmd=1; - break; - case X25_RESET: - if (chan->common.state != WAN_CONNECTED) - bad_cmd=1; - break; - default: - bad_cmd=1; - break; - } - - if (bad_cmd){ - printk(KERN_INFO "%s: Invalid State, BAD Command %x, dev %s, lcn %i, st %i\n", - card->devname,atomic_read(&chan->common.command),dev->name, - chan->common.lcn, chan->common.state); - } - - return bad_cmd; -} - - - -/*************************** XPIPEMON FUNCTIONS **************************/ - -/*============================================================================== - * Process UDP call of type XPIPE - */ - -static int process_udp_mgmt_pkt(sdla_t *card) -{ - int c_retry = MAX_CMD_RETRY; - unsigned int len; - struct sk_buff *new_skb; - TX25Mbox *mbox = card->mbox; - int err; - int udp_mgmt_req_valid = 1; - struct net_device *dev; - x25_channel_t *chan; - unsigned short lcn; - struct timeval tv; - - - x25_udp_pkt_t *x25_udp_pkt; - x25_udp_pkt = (x25_udp_pkt_t *)card->u.x.udp_pkt_data; - - dev = card->u.x.udp_dev; - chan = dev->priv; - lcn = chan->common.lcn; - - switch(x25_udp_pkt->cblock.command) { - - /* XPIPE_ENABLE_TRACE */ - case XPIPE_ENABLE_TRACING: - - /* XPIPE_GET_TRACE_INFO */ - case XPIPE_GET_TRACE_INFO: - - /* SET FT1 MODE */ - case XPIPE_SET_FT1_MODE: - - if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_direction_err; - udp_mgmt_req_valid = 0; - break; - } - - /* XPIPE_FT1_READ_STATUS */ - case XPIPE_FT1_READ_STATUS: - - /* FT1 MONITOR STATUS */ - case XPIPE_FT1_STATUS_CTRL: - if(card->hw.fwid != SFID_X25_508) { - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_type_err; - udp_mgmt_req_valid = 0; - break; - } - default: - break; - } - - if(!udp_mgmt_req_valid) { - /* set length to 0 */ - x25_udp_pkt->cblock.length = 0; - /* set return code */ - x25_udp_pkt->cblock.result = (card->hw.fwid != SFID_X25_508) ? 0x1F : 0xCD; - - } else { - - switch (x25_udp_pkt->cblock.command) { - - - case XPIPE_FLUSH_DRIVER_STATS: - init_x25_channel_struct(chan); - init_global_statistics(card); - mbox->cmd.length = 0; - break; - - - case XPIPE_DRIVER_STAT_IFSEND: - memcpy(x25_udp_pkt->data, &chan->if_send_stat, sizeof(if_send_stat_t)); - mbox->cmd.length = sizeof(if_send_stat_t); - x25_udp_pkt->cblock.length = mbox->cmd.length; - break; - - case XPIPE_DRIVER_STAT_INTR: - memcpy(&x25_udp_pkt->data[0], &card->statistics, sizeof(global_stats_t)); - memcpy(&x25_udp_pkt->data[sizeof(global_stats_t)], - &chan->rx_intr_stat, sizeof(rx_intr_stat_t)); - - mbox->cmd.length = sizeof(global_stats_t) + - sizeof(rx_intr_stat_t); - x25_udp_pkt->cblock.length = mbox->cmd.length; - break; - - case XPIPE_DRIVER_STAT_GEN: - memcpy(x25_udp_pkt->data, - &chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err, - sizeof(pipe_mgmt_stat_t)); - - memcpy(&x25_udp_pkt->data[sizeof(pipe_mgmt_stat_t)], - &card->statistics, sizeof(global_stats_t)); - - x25_udp_pkt->cblock.result = 0; - x25_udp_pkt->cblock.length = sizeof(global_stats_t)+ - sizeof(rx_intr_stat_t); - mbox->cmd.length = x25_udp_pkt->cblock.length; - break; - - case XPIPE_ROUTER_UP_TIME: - do_gettimeofday(&tv); - chan->router_up_time = tv.tv_sec - chan->router_start_time; - *(unsigned long *)&x25_udp_pkt->data = chan->router_up_time; - x25_udp_pkt->cblock.length = mbox->cmd.length = 4; - x25_udp_pkt->cblock.result = 0; - break; - - default : - - do { - memcpy(&mbox->cmd, &x25_udp_pkt->cblock.command, sizeof(TX25Cmd)); - if(mbox->cmd.length){ - memcpy(&mbox->data, - (char *)x25_udp_pkt->data, - mbox->cmd.length); - } - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && c_retry-- && x25_error(card, err, mbox->cmd.command, 0)); - - - if ( err == CMD_OK || - (err == 1 && - (mbox->cmd.command == 0x06 || - mbox->cmd.command == 0x16) ) ){ - - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_OK; - } else { - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_timeout; - } - - /* copy the result back to our buffer */ - memcpy(&x25_udp_pkt->cblock.command, &mbox->cmd, sizeof(TX25Cmd)); - - if(mbox->cmd.length) { - memcpy(&x25_udp_pkt->data, &mbox->data, mbox->cmd.length); - } - break; - - } //switch - - } - - /* Fill UDP TTL */ - - x25_udp_pkt->ip_pkt.ttl = card->wandev.ttl; - len = reply_udp(card->u.x.udp_pkt_data, mbox->cmd.length); - - - if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { - - err = x25_send(card, lcn, 0, len, card->u.x.udp_pkt_data); - if (!err) - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_passed; - else - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_failed; - - } else { - - /* Allocate socket buffer */ - if((new_skb = dev_alloc_skb(len)) != NULL) { - void *buf; - - /* copy data into new_skb */ - buf = skb_put(new_skb, len); - memcpy(buf, card->u.x.udp_pkt_data, len); - - /* Decapsulate packet and pass it up the protocol - stack */ - new_skb->dev = dev; - - if (chan->common.usedby == API) - new_skb->protocol = htons(X25_PROT); - else - new_skb->protocol = htons(ETH_P_IP); - - new_skb->mac.raw = new_skb->data; - - netif_rx(new_skb); - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_stack; - - } else { - ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_no_socket; - printk(KERN_INFO - "%s: UDP mgmt cmnd, no socket buffers available!\n", - card->devname); - } - } - - card->u.x.udp_pkt_lgth = 0; - - return 1; -} - - -/*============================================================================== - * Determine what type of UDP call it is. DRVSTATS or XPIPE8ND ? - */ -static int udp_pkt_type( struct sk_buff *skb, sdla_t* card ) -{ - x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)skb->data; - - if((x25_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && - (x25_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) && - (x25_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) && - (x25_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) { - - if(!strncmp(x25_udp_pkt->wp_mgmt.signature, - UDPMGMT_XPIPE_SIGNATURE, 8)){ - return UDP_XPIPE_TYPE; - }else{ - printk(KERN_INFO "%s: UDP Packet, Failed Signature !\n", - card->devname); - } - } - - return UDP_INVALID_TYPE; -} - - -/*============================================================================ - * Reply to UDP Management system. - * Return nothing. - */ -static int reply_udp( unsigned char *data, unsigned int mbox_len ) -{ - unsigned short len, udp_length, temp, ip_length; - unsigned long ip_temp; - int even_bound = 0; - - - x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)data; - - /* Set length of packet */ - len = sizeof(ip_pkt_t)+ - sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - mbox_len; - - - /* fill in UDP reply */ - x25_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; - - /* fill in UDP length */ - udp_length = sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - mbox_len; - - - /* put it on an even boundary */ - if ( udp_length & 0x0001 ) { - udp_length += 1; - len += 1; - even_bound = 1; - } - - temp = (udp_length<<8)|(udp_length>>8); - x25_udp_pkt->udp_pkt.udp_length = temp; - - /* swap UDP ports */ - temp = x25_udp_pkt->udp_pkt.udp_src_port; - x25_udp_pkt->udp_pkt.udp_src_port = - x25_udp_pkt->udp_pkt.udp_dst_port; - x25_udp_pkt->udp_pkt.udp_dst_port = temp; - - - - /* add UDP pseudo header */ - temp = 0x1100; - *((unsigned short *) - (x25_udp_pkt->data+mbox_len+even_bound)) = temp; - temp = (udp_length<<8)|(udp_length>>8); - *((unsigned short *) - (x25_udp_pkt->data+mbox_len+even_bound+2)) = temp; - - /* calculate UDP checksum */ - x25_udp_pkt->udp_pkt.udp_checksum = 0; - - x25_udp_pkt->udp_pkt.udp_checksum = - calc_checksum(&data[UDP_OFFSET], udp_length+UDP_OFFSET); - - /* fill in IP length */ - ip_length = len; - temp = (ip_length<<8)|(ip_length>>8); - x25_udp_pkt->ip_pkt.total_length = temp; - - /* swap IP addresses */ - ip_temp = x25_udp_pkt->ip_pkt.ip_src_address; - x25_udp_pkt->ip_pkt.ip_src_address = - x25_udp_pkt->ip_pkt.ip_dst_address; - x25_udp_pkt->ip_pkt.ip_dst_address = ip_temp; - - - /* fill in IP checksum */ - x25_udp_pkt->ip_pkt.hdr_checksum = 0; - x25_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data, sizeof(ip_pkt_t)); - - return len; -} /* reply_udp */ - -unsigned short calc_checksum (char *data, int len) -{ - unsigned short temp; - unsigned long sum=0; - int i; - - for( i = 0; i <len; i+=2 ) { - memcpy(&temp,&data[i],2); - sum += (unsigned long)temp; - } - - while (sum >> 16 ) { - sum = (sum & 0xffffUL) + (sum >> 16); - } - - temp = (unsigned short)sum; - temp = ~temp; - - if( temp == 0 ) - temp = 0xffff; - - return temp; -} - -/*============================================================================= - * Store a UDP management packet for later processing. - */ - -static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, - struct net_device *dev, struct sk_buff *skb, - int lcn) -{ - int udp_pkt_stored = 0; - - if(!card->u.x.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){ - card->u.x.udp_pkt_lgth = skb->len; - card->u.x.udp_type = udp_type; - card->u.x.udp_pkt_src = udp_pkt_src; - card->u.x.udp_lcn = lcn; - card->u.x.udp_dev = dev; - memcpy(card->u.x.udp_pkt_data, skb->data, skb->len); - card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UDP_PKT; - udp_pkt_stored = 1; - - }else{ - printk(KERN_INFO "%s: ERROR: UDP packet not stored for LCN %d\n", - card->devname,lcn); - } - - if(udp_pkt_src == UDP_PKT_FRM_STACK){ - dev_kfree_skb_any(skb); - }else{ - dev_kfree_skb_any(skb); - } - - return(udp_pkt_stored); -} - - - -/*============================================================================= - * Initial the ppp_private_area structure. - */ -static void init_x25_channel_struct( x25_channel_t *chan ) -{ - memset(&chan->if_send_stat.if_send_entry,0,sizeof(if_send_stat_t)); - memset(&chan->rx_intr_stat.rx_intr_no_socket,0,sizeof(rx_intr_stat_t)); - memset(&chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err,0,sizeof(pipe_mgmt_stat_t)); -} - -/*============================================================================ - * Initialize Global Statistics - */ -static void init_global_statistics( sdla_t *card ) -{ - memset(&card->statistics.isr_entry,0,sizeof(global_stats_t)); -} - - -/*=============================================================== - * SMP Support - * ==============================================================*/ - -static void S508_S514_lock(sdla_t *card, unsigned long *smp_flags) -{ - spin_lock_irqsave(&card->wandev.lock, *smp_flags); -} -static void S508_S514_unlock(sdla_t *card, unsigned long *smp_flags) -{ - spin_unlock_irqrestore(&card->wandev.lock, *smp_flags); -} - -/*=============================================================== - * x25_timer_routine - * - * A more efficient polling routine. Each half a second - * queue a polling task. We want to do the polling in a - * task not timer, because timer runs in interrupt time. - * - * FIXME Polling should be rethinked. - *==============================================================*/ - -static void x25_timer_routine(unsigned long data) -{ - sdla_t *card = (sdla_t*)data; - - if (!card->wandev.dev){ - printk(KERN_INFO "%s: Stopping the X25 Poll Timer: No Dev.\n", - card->devname); - return; - } - - if (card->open_cnt != card->u.x.num_of_ch){ - printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Interface down.\n", - card->devname); - return; - } - - if (test_bit(PERI_CRIT,&card->wandev.critical)){ - printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Shutting down.\n", - card->devname); - return; - } - - if (!test_and_set_bit(POLL_CRIT,&card->wandev.critical)){ - trigger_x25_poll(card); - } - - card->u.x.x25_timer.expires=jiffies+(HZ>>1); - add_timer(&card->u.x.x25_timer); - return; -} - -void disable_comm_shutdown(sdla_t *card) -{ - TX25Mbox* mbox = card->mbox; - int err; - - /* Turn of interrutps */ - mbox->data[0] = 0; - if (card->hw.fwid == SFID_X25_508){ - mbox->data[1] = card->hw.irq; - mbox->data[2] = 2; - mbox->cmd.length = 3; - }else { - mbox->cmd.length = 1; - } - mbox->cmd.command = X25_SET_INTERRUPT_MODE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err) - printk(KERN_INFO "INTERRUPT OFF FAIED %x\n",err); - - /* Bring down HDLC */ - mbox->cmd.command = X25_HDLC_LINK_CLOSE; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err) - printk(KERN_INFO "LINK CLOSED FAILED %x\n",err); - - - /* Brind down DTR */ - mbox->data[0] = 0; - mbox->data[2] = 0; - mbox->data[1] = 0x01; - mbox->cmd.length = 3; - mbox->cmd.command = X25_SET_GLOBAL_VARS; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err) - printk(KERN_INFO "DTR DOWN FAILED %x\n",err); - -} - -MODULE_LICENSE("GPL"); - -/****** End *****************************************************************/ |