diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/ani.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.h | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h new file mode 100644 index 0000000..55cf26d --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2010 Bruno Randolf <br1@einfach.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef ANI_H +#define ANI_H + +/* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */ +#define ATH5K_ANI_LISTEN_PERIOD 100 +#define ATH5K_ANI_OFDM_TRIG_HIGH 500 +#define ATH5K_ANI_OFDM_TRIG_LOW 200 +#define ATH5K_ANI_CCK_TRIG_HIGH 200 +#define ATH5K_ANI_CCK_TRIG_LOW 100 + +/* average beacon RSSI thresholds */ +#define ATH5K_ANI_RSSI_THR_HIGH 40 +#define ATH5K_ANI_RSSI_THR_LOW 7 + +/* maximum availabe levels */ +#define ATH5K_ANI_MAX_FIRSTEP_LVL 2 +#define ATH5K_ANI_MAX_NOISE_IMM_LVL 1 + + +/** + * enum ath5k_ani_mode - mode for ANI / noise sensitivity + * + * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI + * algorithm after it has been on auto mode. + * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, + * maximizing sensitivity. ANI will not run. + * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, + * minimizing sensitivity. ANI will not run. + * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the + * amount of OFDM and CCK frame errors (default). + */ +enum ath5k_ani_mode { + ATH5K_ANI_MODE_OFF = 0, + ATH5K_ANI_MODE_MANUAL_LOW = 1, + ATH5K_ANI_MODE_MANUAL_HIGH = 2, + ATH5K_ANI_MODE_AUTO = 3 +}; + + +/** + * struct ath5k_ani_state - ANI state and associated counters + * + * @max_spur_level: the maximum spur level is chip dependent + */ +struct ath5k_ani_state { + enum ath5k_ani_mode ani_mode; + + /* state */ + int noise_imm_level; + int spur_level; + int firstep_level; + bool ofdm_weak_sig; + bool cck_weak_sig; + + int max_spur_level; + + /* used by the algorithm */ + unsigned int listen_time; + unsigned int ofdm_errors; + unsigned int cck_errors; + + /* debug/statistics only: numbers from last ANI calibration */ + unsigned int pfc_tx; + unsigned int pfc_rx; + unsigned int pfc_busy; + unsigned int pfc_cycles; + unsigned int last_listen; + unsigned int last_ofdm_errors; + unsigned int last_cck_errors; + unsigned int sum_ofdm_errors; + unsigned int sum_cck_errors; +}; + +void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode); +void ath5k_ani_mib_intr(struct ath5k_hw *ah); +void ath5k_ani_calibration(struct ath5k_hw *ah); +void ath5k_ani_phy_error_report(struct ath5k_hw *ah, + enum ath5k_phy_error_code phyerr); + +/* for manual control */ +void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on); +void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on); + +void ath5k_ani_print_counters(struct ath5k_hw *ah); + +#endif /* ANI_H */ |