diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_main.c')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_main.c | 393 |
1 files changed, 316 insertions, 77 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index aa970b7..814f300 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -117,8 +117,7 @@ static struct conf_drv_settings default_conf = { .tx = { .tx_energy_detection = 0, .rc_conf = { - .enabled_rates = CONF_HW_BIT_RATE_1MBPS | - CONF_HW_BIT_RATE_2MBPS, + .enabled_rates = 0, .short_retry_limit = 10, .long_retry_limit = 10, .aflags = 0 @@ -215,11 +214,13 @@ static struct conf_drv_settings default_conf = { }, .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, .tx_compl_timeout = 700, - .tx_compl_threshold = 4 + .tx_compl_threshold = 4, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, - .listen_interval = 0, + .listen_interval = 1, .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, .bcn_filt_ie_count = 1, .bcn_filt_ie = { @@ -234,38 +235,11 @@ static struct conf_drv_settings default_conf = { .broadcast_timeout = 20000, .rx_broadcast_in_ps = 1, .ps_poll_threshold = 20, - .sig_trigger_count = 2, - .sig_trigger = { - [0] = { - .threshold = -75, - .pacing = 500, - .metric = CONF_TRIG_METRIC_RSSI_BEACON, - .type = CONF_TRIG_EVENT_TYPE_EDGE, - .direction = CONF_TRIG_EVENT_DIR_LOW, - .hysteresis = 2, - .index = 0, - .enable = 1 - }, - [1] = { - .threshold = -75, - .pacing = 500, - .metric = CONF_TRIG_METRIC_RSSI_BEACON, - .type = CONF_TRIG_EVENT_TYPE_EDGE, - .direction = CONF_TRIG_EVENT_DIR_HIGH, - .hysteresis = 2, - .index = 1, - .enable = 1 - } - }, - .sig_weights = { - .rssi_bcn_avg_weight = 10, - .rssi_pkt_avg_weight = 10, - .snr_bcn_avg_weight = 10, - .snr_pkt_avg_weight = 10 - }, .bet_enable = CONF_BET_MODE_ENABLE, .bet_max_consecutive = 10, - .psm_entry_retries = 3 + .psm_entry_retries = 3, + .keep_alive_interval = 55000, + .max_listen_interval = 20, }, .init = { .radioparam = { @@ -279,6 +253,14 @@ static struct conf_drv_settings default_conf = { .pm_config = { .host_clk_settling_time = 5000, .host_fast_wakeup_support = false + }, + .roam_trigger = { + /* FIXME: due to firmware bug, must use value 1 for now */ + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10 } }; @@ -349,7 +331,7 @@ static int wl1271_plt_init(struct wl1271 *wl) goto out_free_memmap; /* Initialize connection monitoring thresholds */ - ret = wl1271_acx_conn_monit_params(wl); + ret = wl1271_acx_conn_monit_params(wl, false); if (ret < 0) goto out_free_memmap; @@ -959,9 +941,11 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: wl->bss_type = BSS_TYPE_STA_BSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; break; case NL80211_IFTYPE_ADHOC: wl->bss_type = BSS_TYPE_IBSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; break; default: ret = -EOPNOTSUPP; @@ -1066,6 +1050,7 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw, memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1); wl->ssid_len = 0; wl->bss_type = MAX_BSS_TYPE; + wl->set_bss_type = MAX_BSS_TYPE; wl->band = IEEE80211_BAND_2GHZ; wl->rx_counter = 0; @@ -1088,6 +1073,14 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw, wl->tx_blocks_freed[i] = 0; wl1271_debugfs_reset(wl); + + kfree(wl->fw_status); + wl->fw_status = NULL; + kfree(wl->tx_res_if); + wl->tx_res_if = NULL; + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + mutex_unlock(&wl->mutex); } @@ -1138,10 +1131,7 @@ static int wl1271_join_channel(struct wl1271 *wl, int channel) /* pass through frames from all BSS */ wl1271_configure_filters(wl, FIF_OTHER_BSS); - /* the dummy join is performed always with STATION BSS type to allow - also ad-hoc mode to listen to the surroundings without sending any - beacons yet. */ - ret = wl1271_cmd_join(wl, BSS_TYPE_STA_BSS); + ret = wl1271_cmd_join(wl, wl->set_bss_type); if (ret < 0) goto out; @@ -1171,6 +1161,32 @@ out: return ret; } +static void wl1271_set_band_rate(struct wl1271 *wl) +{ + if (wl->band == IEEE80211_BAND_2GHZ) + wl->basic_rate_set = wl->conf.tx.basic_rate; + else + wl->basic_rate_set = wl->conf.tx.basic_rate_5; +} + +static u32 wl1271_min_rate_get(struct wl1271 *wl) +{ + int i; + u32 rate = 0; + + if (!wl->basic_rate_set) { + WARN_ON(1); + wl->basic_rate_set = wl->conf.tx.basic_rate; + } + + for (i = 0; !rate; i++) { + if ((wl->basic_rate_set >> i) & 0x1) + rate = 1 << i; + } + + return rate; +} + static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) { struct wl1271 *wl = hw->priv; @@ -1187,12 +1203,41 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&wl->mutex); - wl->band = conf->channel->band; + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; ret = wl1271_ps_elp_wakeup(wl, false); if (ret < 0) goto out; + /* if the channel changes while joined, join again */ + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + wl->band = conf->channel->band; + wl->channel = channel; + + /* + * FIXME: the mac80211 should really provide a fixed rate + * to use here. for now, just use the smallest possible rate + * for the band as a fixed rate for association frames and + * other control messages. + */ + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_set_band_rate(wl); + + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + wl1271_warning("rate policy for update channel " + "failed %d", ret); + + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + wl1271_warning("cmd join to update channel " + "failed %d", ret); + } + } + if (changed & IEEE80211_CONF_CHANGE_IDLE) { if (conf->flags & IEEE80211_CONF_IDLE && test_bit(WL1271_FLAG_JOINED, &wl->flags)) @@ -1201,24 +1246,17 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) wl1271_join_channel(wl, channel); if (conf->flags & IEEE80211_CONF_IDLE) { - wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->rate_set = wl1271_min_rate_get(wl); wl->sta_rate_set = 0; wl1271_acx_rate_policies(wl); - } + wl1271_acx_keep_alive_config( + wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_INVALID); + set_bit(WL1271_FLAG_IDLE, &wl->flags); + } else + clear_bit(WL1271_FLAG_IDLE, &wl->flags); } - /* if the channel changes while joined, join again */ - if (channel != wl->channel && - test_bit(WL1271_FLAG_JOINED, &wl->flags)) { - wl->channel = channel; - /* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */ - ret = wl1271_cmd_join(wl, wl->bss_type); - if (ret < 0) - wl1271_warning("cmd join to update channel failed %d", - ret); - } else - wl->channel = channel; - if (conf->flags & IEEE80211_CONF_PS && !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); @@ -1272,6 +1310,11 @@ static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, { struct wl1271_filter_params *fp; struct netdev_hw_addr *ha; + struct wl1271 *wl = hw->priv; + int i; + + if (unlikely(wl->state == WL1271_STATE_OFF)) + return 0; fp = kzalloc(sizeof(*fp), GFP_ATOMIC); if (!fp) { @@ -1314,15 +1357,16 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw, mutex_lock(&wl->mutex); - if (wl->state == WL1271_STATE_OFF) + *total &= WL1271_SUPPORTED_FILTERS; + changed &= WL1271_SUPPORTED_FILTERS; + + if (unlikely(wl->state == WL1271_STATE_OFF)) goto out; ret = wl1271_ps_elp_wakeup(wl, false); if (ret < 0) goto out; - *total &= WL1271_SUPPORTED_FILTERS; - changed &= WL1271_SUPPORTED_FILTERS; if (*total & FIF_ALLMULTI) ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0); @@ -1516,10 +1560,13 @@ out: static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) { struct wl1271 *wl = hw->priv; - int ret; + int ret = 0; mutex_lock(&wl->mutex); + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + ret = wl1271_ps_elp_wakeup(wl, false); if (ret < 0) goto out; @@ -1561,6 +1608,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, enum wl1271_cmd_ps_mode mode; struct wl1271 *wl = hw->priv; bool do_join = false; + bool do_keepalive = false; int ret; wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); @@ -1571,20 +1619,29 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, if (ret < 0) goto out; - if (wl->bss_type == BSS_TYPE_IBSS) { - /* FIXME: This implements rudimentary ad-hoc support - - proper templates are on the wish list and notification - on when they change. This patch will update the templates - on every call to this function. */ + if ((changed && BSS_CHANGED_BEACON_INT) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon interval updated: %d", + bss_conf->beacon_int); + + wl->beacon_int = bss_conf->beacon_int; + do_join = true; + } + + if ((changed && BSS_CHANGED_BEACON) && + (wl->bss_type == BSS_TYPE_IBSS)) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated"); + if (beacon) { struct ieee80211_hdr *hdr; wl1271_ssid_set(wl, beacon); ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, beacon->data, - beacon->len); + beacon->len, 0, + wl1271_min_rate_get(wl)); if (ret < 0) { dev_kfree_skb(beacon); @@ -1599,7 +1656,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, beacon->data, - beacon->len); + beacon->len, 0, + wl1271_min_rate_get(wl)); dev_kfree_skb(beacon); if (ret < 0) goto out_sleep; @@ -1609,6 +1667,30 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, } } + if ((changed & BSS_CHANGED_BEACON_ENABLED) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s", + bss_conf->enable_beacon ? "enabled" : "disabled"); + + if (bss_conf->enable_beacon) + wl->set_bss_type = BSS_TYPE_IBSS; + else + wl->set_bss_type = BSS_TYPE_STA_BSS; + do_join = true; + } + + if (changed & BSS_CHANGED_CQM) { + bool enable = false; + if (bss_conf->cqm_rssi_thold) + enable = true; + ret = wl1271_acx_rssi_snr_trigger(wl, enable, + bss_conf->cqm_rssi_thold, + bss_conf->cqm_rssi_hyst); + if (ret < 0) + goto out; + wl->rssi_thold = bss_conf->cqm_rssi_thold; + } + if ((changed & BSS_CHANGED_BSSID) && /* * Now we know the correct bssid, so we send a new join command @@ -1630,10 +1712,23 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_ASSOC) { if (bss_conf->assoc) { + u32 rates; wl->aid = bss_conf->aid; set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); /* + * use basic rates from AP, and determine lowest rate + * to use with control frames. + */ + rates = bss_conf->basic_rates; + wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, + rates); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* * with wl1271, we don't need to update the * beacon_int and dtim_period, because the firmware * updates it by itself when the first beacon is @@ -1643,7 +1738,30 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, if (ret < 0) goto out_sleep; - ret = wl1271_acx_aid(wl, wl->aid); + /* + * The SSID is intentionally set to NULL here - the + * firmware will set the probe request with a + * broadcast SSID regardless of what we set in the + * template. + */ + ret = wl1271_cmd_build_probe_req(wl, NULL, 0, + NULL, 0, wl->band); + + /* Enable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, true); + if (ret < 0) + goto out_sleep; + + /* + * This is awkward. The keep-alive configs must be done + * *after* the join command, because otherwise it will + * not work, but it must only be done *once* because + * otherwise the firmware will start complaining. + */ + do_keepalive = true; + + /* enable the connection monitoring feature */ + ret = wl1271_acx_conn_monit_params(wl, true); if (ret < 0) goto out_sleep; @@ -1659,6 +1777,22 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, /* use defaults when not associated */ clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); wl->aid = 0; + + /* revert back to minimum rates for the current band */ + wl1271_set_band_rate(wl); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* disable connection monitor features */ + ret = wl1271_acx_conn_monit_params(wl, false); + + /* Disable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, false); + + if (ret < 0) + goto out_sleep; } } @@ -1693,7 +1827,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, } if (do_join) { - ret = wl1271_cmd_join(wl, wl->bss_type); + ret = wl1271_cmd_join(wl, wl->set_bss_type); if (ret < 0) { wl1271_warning("cmd join failed %d", ret); goto out_sleep; @@ -1701,6 +1835,29 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, set_bit(WL1271_FLAG_JOINED, &wl->flags); } + /* + * The JOIN operation shuts down the firmware keep-alive as a side + * effect, and the ACX_AID will start the keep-alive as a side effect. + * Hence, for non-IBSS, the ACX_AID must always happen *after* the + * JOIN operation, and the template config after the ACX_AID. + */ + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) { + ret = wl1271_acx_aid(wl, wl->aid); + if (ret < 0) + goto out_sleep; + } + + if (do_keepalive) { + ret = wl1271_cmd_build_klv_null_data(wl); + if (ret < 0) + goto out_sleep; + ret = wl1271_acx_keep_alive_config( + wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_VALID); + if (ret < 0) + goto out_sleep; + } + out_sleep: wl1271_ps_elp_sleep(wl); @@ -1812,6 +1969,36 @@ static struct ieee80211_channel wl1271_channels[] = { { .hw_value = 13, .center_freq = 2472, .max_power = 25 }, }; +/* mapping to indexes for wl1271_rates */ +const static u8 wl1271_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* CONF_HW_RXTX_RATE_54 */ + 10, /* CONF_HW_RXTX_RATE_48 */ + 9, /* CONF_HW_RXTX_RATE_36 */ + 8, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 7, /* CONF_HW_RXTX_RATE_18 */ + 6, /* CONF_HW_RXTX_RATE_12 */ + 3, /* CONF_HW_RXTX_RATE_11 */ + 5, /* CONF_HW_RXTX_RATE_9 */ + 4, /* CONF_HW_RXTX_RATE_6 */ + 2, /* CONF_HW_RXTX_RATE_5_5 */ + 1, /* CONF_HW_RXTX_RATE_2 */ + 0 /* CONF_HW_RXTX_RATE_1 */ +}; + /* can't be const, mac80211 writes to this */ static struct ieee80211_supported_band wl1271_band_2ghz = { .channels = wl1271_channels, @@ -1894,6 +2081,35 @@ static struct ieee80211_channel wl1271_channels_5ghz[] = { { .hw_value = 165, .center_freq = 5825}, }; +/* mapping to indexes for wl1271_rates_5ghz */ +const static u8 wl1271_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* CONF_HW_RXTX_RATE_54 */ + 6, /* CONF_HW_RXTX_RATE_48 */ + 5, /* CONF_HW_RXTX_RATE_36 */ + 4, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 3, /* CONF_HW_RXTX_RATE_18 */ + 2, /* CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11 */ + 1, /* CONF_HW_RXTX_RATE_9 */ + 0, /* CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED /* CONF_HW_RXTX_RATE_1 */ +}; static struct ieee80211_supported_band wl1271_band_5ghz = { .channels = wl1271_channels_5ghz, @@ -1902,6 +2118,11 @@ static struct ieee80211_supported_band wl1271_band_5ghz = { .n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz), }; +const static u8 *wl1271_band_rate_to_idx[] = { + [IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz, + [IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz +}; + static const struct ieee80211_ops wl1271_ops = { .start = wl1271_op_start, .stop = wl1271_op_stop, @@ -1919,6 +2140,27 @@ static const struct ieee80211_ops wl1271_ops = { CFG80211_TESTMODE_CMD(wl1271_tm_cmd) }; + +u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate) +{ + u8 idx; + + BUG_ON(wl->band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *)); + + if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) { + wl1271_error("Illegal RX rate from HW: %d", rate); + return 0; + } + + idx = wl1271_band_rate_to_idx[wl->band][rate]; + if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) { + wl1271_error("Unsupported RX rate from HW: %d", rate); + return 0; + } + + return idx; +} + static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev, struct device_attribute *attr, char *buf) @@ -2021,13 +2263,16 @@ int wl1271_init_ieee80211(struct wl1271 *wl) /* unit us */ /* FIXME: find a proper value */ wl->hw->channel_change_time = 10000; + wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_UAPSD | - IEEE80211_HW_HAS_RATE_CONTROL; + IEEE80211_HW_HAS_RATE_CONTROL | + IEEE80211_HW_CONNECTION_MONITOR | + IEEE80211_HW_SUPPORTS_CQM_RSSI; wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); @@ -2038,6 +2283,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz; wl->hw->queues = 4; + wl->hw->max_rates = 1; SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl)); @@ -2053,7 +2299,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void) struct platform_device *plat_dev = NULL; struct wl1271 *wl; int i, ret; - static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf}; hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); if (!hw) { @@ -2083,6 +2328,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void) INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); wl->channel = WL1271_DEFAULT_CHANNEL; + wl->beacon_int = WL1271_DEFAULT_BEACON_INT; wl->default_key = 0; wl->rx_counter = 0; wl->rx_config = WL1271_DEFAULT_RX_CONFIG; @@ -2090,6 +2336,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void) wl->psm_entry_retry = 0; wl->power_level = WL1271_DEFAULT_POWER_LEVEL; wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC; + wl->basic_rate = CONF_TX_RATE_MASK_BASIC; wl->rate_set = CONF_TX_RATE_MASK_BASIC; wl->sta_rate_set = 0; wl->band = IEEE80211_BAND_2GHZ; @@ -2105,13 +2352,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void) wl->state = WL1271_STATE_OFF; mutex_init(&wl->mutex); - /* - * FIXME: we should use a zero MAC address here, but for now we - * generate a random Nokia address. - */ - memcpy(wl->mac_addr, nokia_oui, 3); - get_random_bytes(wl->mac_addr + 3, 3); - /* Apply default driver configuration. */ wl1271_conf_init(wl); @@ -2157,7 +2397,6 @@ int wl1271_free_hw(struct wl1271 *wl) wl1271_debugfs_exit(wl); - kfree(wl->target_mem_map); vfree(wl->fw); wl->fw = NULL; kfree(wl->nvs); |