1 files changed, 8 insertions, 148 deletions

diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index 0254901..2a5f64a 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -21,8 +21,9 @@
 #include <linux/dmaengine.h>
 #include <linux/interrupt.h>
 
-struct pl08x_lli;
 struct pl08x_driver_data;
+struct pl08x_phy_chan;
+struct pl08x_txd;
 
 /* Bitmasks for selecting AHB ports for DMA transfers */
 enum {
@@ -46,170 +47,29 @@ enum {
  * devices with static assignments
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
- * @cctl_opt: default options for the channel control register
+ * @cctl_memcpy: options for the channel control register for memcpy
+ *  *** not used for slave channels ***
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
  * this.
- * @circular_buffer: whether the buffer passed in is circular and
- * shall simply be looped round round (like a record baby round
- * round round round)
  * @single: the device connected to this channel will request single DMA
  * transfers, not bursts. (Bursts are default.)
  * @periph_buses: the device connected to this channel is accessible via
  * these buses (use PL08X_AHB1 | PL08X_AHB2).
  */
 struct pl08x_channel_data {
-	char *bus_id;
+	const char *bus_id;
 	int min_signal;
 	int max_signal;
 	u32 muxval;
-	u32 cctl;
+	u32 cctl_memcpy;
 	dma_addr_t addr;
-	bool circular_buffer;
 	bool single;
 	u8 periph_buses;
 };
 
 /**
- * Struct pl08x_bus_data - information of source or destination
- * busses for a transfer
- * @addr: current address
- * @maxwidth: the maximum width of a transfer on this bus
- * @buswidth: the width of this bus in bytes: 1, 2 or 4
- */
-struct pl08x_bus_data {
-	dma_addr_t addr;
-	u8 maxwidth;
-	u8 buswidth;
-};
-
-/**
- * struct pl08x_phy_chan - holder for the physical channels
- * @id: physical index to this channel
- * @lock: a lock to use when altering an instance of this struct
- * @signal: the physical signal (aka channel) serving this physical channel
- * right now
- * @serving: the virtual channel currently being served by this physical
- * channel
- * @locked: channel unavailable for the system, e.g. dedicated to secure
- * world
- */
-struct pl08x_phy_chan {
-	unsigned int id;
-	void __iomem *base;
-	spinlock_t lock;
-	int signal;
-	struct pl08x_dma_chan *serving;
-	bool locked;
-};
-
-/**
- * struct pl08x_sg - structure containing data per sg
- * @src_addr: src address of sg
- * @dst_addr: dst address of sg
- * @len: transfer len in bytes
- * @node: node for txd's dsg_list
- */
-struct pl08x_sg {
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	size_t len;
-	struct list_head node;
-};
-
-/**
- * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
- * @tx: async tx descriptor
- * @node: node for txd list for channels
- * @dsg_list: list of children sg's
- * @direction: direction of transfer
- * @llis_bus: DMA memory address (physical) start for the LLIs
- * @llis_va: virtual memory address start for the LLIs
- * @cctl: control reg values for current txd
- * @ccfg: config reg values for current txd
- */
-struct pl08x_txd {
-	struct dma_async_tx_descriptor tx;
-	struct list_head node;
-	struct list_head dsg_list;
-	enum dma_transfer_direction direction;
-	dma_addr_t llis_bus;
-	struct pl08x_lli *llis_va;
-	/* Default cctl value for LLIs */
-	u32 cctl;
-	/*
-	 * Settings to be put into the physical channel when we
-	 * trigger this txd.  Other registers are in llis_va[0].
-	 */
-	u32 ccfg;
-};
-
-/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
- * states
- * @PL08X_CHAN_IDLE: the channel is idle
- * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
- * channel and is running a transfer on it
- * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
- * channel, but the transfer is currently paused
- * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
- * channel to become available (only pertains to memcpy channels)
- */
-enum pl08x_dma_chan_state {
-	PL08X_CHAN_IDLE,
-	PL08X_CHAN_RUNNING,
-	PL08X_CHAN_PAUSED,
-	PL08X_CHAN_WAITING,
-};
-
-/**
- * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
- * @chan: wrappped abstract channel
- * @phychan: the physical channel utilized by this channel, if there is one
- * @phychan_hold: if non-zero, hold on to the physical channel even if we
- * have no pending entries
- * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
- * @name: name of channel
- * @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
- * @runtime_direction: current direction of this channel according to
- * runtime config
- * @pend_list: queued transactions pending on this channel
- * @at: active transaction on this channel
- * @lock: a lock for this channel data
- * @host: a pointer to the host (internal use)
- * @state: whether the channel is idle, paused, running etc
- * @slave: whether this channel is a device (slave) or for memcpy
- * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
- * channels. Fill with 'true' if peripheral should be flow controller. Direction
- * will be selected at Runtime.
- * @waiting: a TX descriptor on this channel which is waiting for a physical
- * channel to become available
- */
-struct pl08x_dma_chan {
-	struct dma_chan chan;
-	struct pl08x_phy_chan *phychan;
-	int phychan_hold;
-	struct tasklet_struct tasklet;
-	char *name;
-	const struct pl08x_channel_data *cd;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	u32 src_cctl;
-	u32 dst_cctl;
-	enum dma_transfer_direction runtime_direction;
-	struct list_head pend_list;
-	struct pl08x_txd *at;
-	spinlock_t lock;
-	struct pl08x_driver_data *host;
-	enum pl08x_dma_chan_state state;
-	bool slave;
-	bool device_fc;
-	struct pl08x_txd *waiting;
-};
-
-/**
  * struct pl08x_platform_data - the platform configuration for the PL08x
  * PrimeCells.
  * @slave_channels: the channels defined for the different devices on the
@@ -229,8 +89,8 @@ struct pl08x_platform_data {
 	const struct pl08x_channel_data *slave_channels;
 	unsigned int num_slave_channels;
 	struct pl08x_channel_data memcpy_channel;
-	int (*get_signal)(struct pl08x_dma_chan *);
-	void (*put_signal)(struct pl08x_dma_chan *);
+	int (*get_signal)(const struct pl08x_channel_data *);
+	void (*put_signal)(const struct pl08x_channel_data *, int);
 	u8 lli_buses;
 	u8 mem_buses;
 };