4 files changed, 112 insertions, 1 deletions
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 60931d0..0bbd13d 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -107,11 +107,16 @@ struct max8997_platform_data {
 	unsigned int buck5_voltage[8];
 	bool buck5_gpiodvs;
 
+	/* ---- Charger control ---- */
+	/* eoc stands for 'end of charge' */
+	int eoc_mA; /* 50 ~ 200mA by 10mA step */
+	/* charge Full Timeout */
+	int timeout; /* 0 (no timeout), 5, 6, 7 hours */
+
 	/* MUIC: Not implemented */
 	/* HAPTIC: Not implemented */
 	/* RTC: Not implemented */
 	/* Flash: Not implemented */
-	/* Charger control: Not implemented */
 };
 
 #endif /* __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 61daa16..f4f0dfa 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -87,6 +87,15 @@ struct max8998_regulator_data {
  * @wakeup: Allow to wake up from suspend
  * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
  * write before reading it.
+ * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, leave it unchanged.
  */
 struct max8998_platform_data {
 	struct max8998_regulator_data	*regulators;
@@ -107,6 +116,9 @@ struct max8998_platform_data {
 	int				buck2_default_idx;
 	bool				wakeup;
 	bool				rtc_delay;
+	int				eoc;
+	int				restart;
+	int				timeout;
 };
 
 #endif /*  __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/power/bq20z75.h b/include/linux/power/bq20z75.h
index b0843b6..1398eb0 100644
--- a/include/linux/power/bq20z75.h
+++ b/include/linux/power/bq20z75.h
@@ -29,11 +29,14 @@
  * @battery_detect:		GPIO which is used to detect battery presence
  * @battery_detect_present:	gpio state when battery is present (0 / 1)
  * @i2c_retry_count:		# of times to retry on i2c IO failure
+ * @poll_retry_count:		# of times to retry looking for new status after
+ *				external change notification
  */
 struct bq20z75_platform_data {
 	int battery_detect;
 	int battery_detect_present;
 	int i2c_retry_count;
+	int poll_retry_count;
 };
 
 #endif
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
index 7995deb..fe99211 100644
--- a/include/linux/power/max17042_battery.h
+++ b/include/linux/power/max17042_battery.h
@@ -23,8 +23,99 @@
 #ifndef __MAX17042_BATTERY_H_
 #define __MAX17042_BATTERY_H_
 
+#define MAX17042_STATUS_BattAbsent	(1 << 3)
+#define MAX17042_BATTERY_FULL	(100)
+#define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
+
+enum max17042_register {
+	MAX17042_STATUS		= 0x00,
+	MAX17042_VALRT_Th	= 0x01,
+	MAX17042_TALRT_Th	= 0x02,
+	MAX17042_SALRT_Th	= 0x03,
+	MAX17042_AtRate		= 0x04,
+	MAX17042_RepCap		= 0x05,
+	MAX17042_RepSOC		= 0x06,
+	MAX17042_Age		= 0x07,
+	MAX17042_TEMP		= 0x08,
+	MAX17042_VCELL		= 0x09,
+	MAX17042_Current	= 0x0A,
+	MAX17042_AvgCurrent	= 0x0B,
+	MAX17042_Qresidual	= 0x0C,
+	MAX17042_SOC		= 0x0D,
+	MAX17042_AvSOC		= 0x0E,
+	MAX17042_RemCap		= 0x0F,
+	MAX17402_FullCAP	= 0x10,
+	MAX17042_TTE		= 0x11,
+	MAX17042_V_empty	= 0x12,
+
+	MAX17042_RSLOW		= 0x14,
+
+	MAX17042_AvgTA		= 0x16,
+	MAX17042_Cycles		= 0x17,
+	MAX17042_DesignCap	= 0x18,
+	MAX17042_AvgVCELL	= 0x19,
+	MAX17042_MinMaxTemp	= 0x1A,
+	MAX17042_MinMaxVolt	= 0x1B,
+	MAX17042_MinMaxCurr	= 0x1C,
+	MAX17042_CONFIG		= 0x1D,
+	MAX17042_ICHGTerm	= 0x1E,
+	MAX17042_AvCap		= 0x1F,
+	MAX17042_ManName	= 0x20,
+	MAX17042_DevName	= 0x21,
+	MAX17042_DevChem	= 0x22,
+
+	MAX17042_TempNom	= 0x24,
+	MAX17042_TempCold	= 0x25,
+	MAX17042_TempHot	= 0x26,
+	MAX17042_AIN		= 0x27,
+	MAX17042_LearnCFG	= 0x28,
+	MAX17042_SHFTCFG	= 0x29,
+	MAX17042_RelaxCFG	= 0x2A,
+	MAX17042_MiscCFG	= 0x2B,
+	MAX17042_TGAIN		= 0x2C,
+	MAx17042_TOFF		= 0x2D,
+	MAX17042_CGAIN		= 0x2E,
+	MAX17042_COFF		= 0x2F,
+
+	MAX17042_Q_empty	= 0x33,
+	MAX17042_T_empty	= 0x34,
+
+	MAX17042_RCOMP0		= 0x38,
+	MAX17042_TempCo		= 0x39,
+	MAX17042_Rx		= 0x3A,
+	MAX17042_T_empty0	= 0x3B,
+	MAX17042_TaskPeriod	= 0x3C,
+	MAX17042_FSTAT		= 0x3D,
+
+	MAX17042_SHDNTIMER	= 0x3F,
+
+	MAX17042_VFRemCap	= 0x4A,
+
+	MAX17042_QH		= 0x4D,
+	MAX17042_QL		= 0x4E,
+};
+
+/*
+ * used for setting a register to a desired value
+ * addr : address for a register
+ * data : setting value for the register
+ */
+struct max17042_reg_data {
+	u8 addr;
+	u16 data;
+};
+
 struct max17042_platform_data {
+	struct max17042_reg_data *init_data;
+	int num_init_data; /* Number of enties in init_data array */
 	bool enable_current_sense;
+
+	/*
+	 * R_sns in micro-ohms.
+	 * default 10000 (if r_sns = 0) as it is the recommended value by
+	 * the datasheet although it can be changed by board designers.
+	 */
+	unsigned int r_sns;
 };
 
 #endif /* __MAX17042_BATTERY_H_ */