aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
Commit message (Collapse)AuthorAgeFilesLines
* brcmfmac: obtain platform data upon module initializationArend van Spriel2013-09-261-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: <stable@vger.kernel.org> # 3.10.x, 3.11.x Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: remove align from brcmf_bus structureFranky Lin2013-08-151-1/+0
| | | | | | | | | | | remove align from brcmf_bus since it is only used by sdio bus layer internally Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add sdio sg list supportFranky Lin2013-06-181-73/+0
| | | | | | | | | | | Add scatter gather list support for better rx glom performance. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: replace brcmf_sdioh_request_buffer with brcmf_sdio_buffrwFranky Lin2013-06-181-39/+2
| | | | | | | | | | | | | | Introducing a new SDIO block data access interface function brcmf_sdio_buffrw. It will act as a unified interface function for any block data access to WiFi dongle through SDIO interface. This patch enables the support for single skb transmission. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/brcm80211/brcmfmac: add missing platform_driver ownerLibo Chen2013-05-221-1/+2
| | | | | | | | set the owner of platform_driver, to ensure that the caller of driver holds a module refernece Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: define and use platform specific data for SDIO.Hante Meuleman2013-04-121-83/+31
| | | | | | | | | | | | | | | | This patch adds support for platform specific data for SDIO fullmac devices. Currently OOB interrupts are configured by Kconfig BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking availibility of platform data. Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Add 43143 SDIO support.Hante Meuleman2013-04-121-0/+2
| | | | | | | | | | | | Added sdio device id to list of supported devices. 43143 is a new 802.11n single stream device. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add BCM4335 sdio interface supportFranky Lin2013-04-121-0/+2
| | | | | | | | | | | | | BCM4335 is an a/b/g/n/ac WiFi chip that supports up to 80MHz channel. This patch adds support for this chip through SDIO interface. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add dedicated log level for low-level sdio debuggingArend van Spriel2013-04-031-30/+30
| | | | | | | | | | | | | | The low-level sdio code has a large number of trace and info messages that are mostly useful looking into bus specific issues. For tracing higher-level driver functions it is better to have a dedicated level for low-level sdio debugging. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: Ia424ff18d9033b97aeffc248358e50c51805e815 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/74 Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: define pr_fmt in one placeArend van Spriel2013-01-071-2/+0
| | | | | | | | | | | | Several source files (but not all) define the pr_fmt() macro in exactly the same way. Instead this commit defines it in a header file so driver logging is consistent. Cc: Joe Perches <joe@perches.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: error messages should not be suppressedArend van Spriel2012-12-101-23/+21
| | | | | | | | | | | | The call to brcmf_dbg(ERROR, ...) only resulted in a log message when compiled with -DDEBUG. Error messages are valuable for resolving issues so this patch replaces it with brcmf_err(...) so they always end up in the log. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: code cleanupHante Meuleman2012-11-161-1/+0
| | | | | | | | | | | | Removing obsolete functions and prototypes. Moving (and renaming) defines to place with similar definitions. Removing unnecessary includes. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: avoid usage of func->card->dev in sdio probe.Hante Meuleman2012-11-161-67/+73
| | | | | | | | | | | | | brcmf_ops_sdio_probe used the private_date func->card->dev to store device data of brcmfmac sdio. This is not a good place to store the data. Use dev of func and use func->card->sdio_func to group the functions the driver is using. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Handle mmc exceptions during init correct.Hante Meuleman2012-11-161-1/+7
| | | | | | | | | | | | | when brcmf_sdbrcm_probe_attach results in error then cleanup will result in null pointer access. In brcmf_sdbrcm_release and in brcmf_ops_sdio_remove. This patch fixes order of init and de-init. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: protect consecutive SDIO access with sdio_claim_hostFranky Lin2012-11-141-5/+2
| | | | | | | | | | Semaphore sdsem is used to protect consecutive memory access through SDIO bus. Same functionality is provided by sdio_claim_host/ sdio_release_host interface as well. Replace sdsem with sdio_claim_host. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'for-davem' of ↵David S. Miller2012-09-301-25/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * brcmfmac: raise SDIO host lock to higher levelFranky Lin2012-09-241-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use SDIO host lock to protect the entire communication process of register access or data read/write rather than function calls to MMC/SDIO stack only. This can help to avoid unintentional memory access and unexpected interruption. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-281-0/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
| * brcm80211: fix missing allocation failure checkColin Ian King2012-09-101-0/+2
| | | | | | | | | | | | | | | | | | Check for oobirq_entry allocation failure to avoid NULL pointer dereferencing. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | brcmfmac: add BCM43241 sdio interface driver supportFranky Lin2012-09-071-0/+2
|/ | | | | | | | | | | | | BCM43241 is an 11abg and 2x2 11n Wifi/BT/FM combo chip that supports 40MHz channel width. This patch intends to enable the driver support for the chip through SDIO bus interface. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add BCM4334 supportFranky Lin2012-06-271-0/+2
| | | | | | | | | BCM4334 is a dualband a/b/g/n WiFi chip support 20MHz/40MHz channels. This patch adds support for its SDIO interface. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: replace brcmf_sdioh_card_regread with brcmf_sdio_regrlFranky Lin2012-05-151-29/+3
| | | | | | | | | | | Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdioh_card_regread as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add out of band interrupt supportFranky Lin2012-05-081-1/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some sdio host controllers do not support real in band interrupt. Software polling mode as a replacement is not fast enough for high throughput and new features. Also some in band interrupts do not support host wake up on embedded platform even when they are real physical interrupts. Therefore out of band (oob) interrupt mechanism is implemented for these scenarios. To provide oob irq number and flags used for irq registration in brcmfmac, a platform device contains irq resource must be registered in board specific code. Here is an example of platform device structure: struct resource brcmf_sdio_res[] = { { .start = GPIO_BRCMF_SDIO_OOB_NUM, .end = GPIO_BRCMF_SDIO_OOB_NUM, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, } }; struct platform_device brcmf_sdio_device = { .name = "brcmf_sdio_pd", .id = -1, .num_resources = ARRAY_SIZE(brcmf_sdio_res), .resource = brcmf_sdio_res, }; Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: fix SDIO function 0 register r/w issueFranky Lin2012-04-271-1/+7
| | | | | | | | | | | | | | SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: initialize host interface drivers regardless resultArend van Spriel2012-03-051-3/+1
| | | | | | | | | | | The module init function of brcmfmac calls init functions for SDIO and USB doing driver registration. This patch removes terminating the module init when a driver registration for one host interface fails. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: move module entry points to dhd_linux.cArend van Spriel2012-02-221-5/+2
| | | | | | | | | | The module_init/exit functions are moved to dhd_linux.c to prepare for supporting multiple host interface types. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: use specific types in struct brcmf_busArend van Spriel2012-02-221-2/+2
| | | | | | | | | | | | The fields bus_priv and drvr are defined as void pointer. It is preferred to have specific types for compiler type checking. To prepare for other bus types the bus_priv field is defined as a union containing the sdio bus private structure reference. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: resolve smatch issues in brcmfmac codeArend van Spriel2012-02-221-1/+2
| | | | | | | | | | | | | | | | | | | This patch resolves the following smatch issues: wl_cfg80211.c +1377 brcmf_cfg80211_connect(65) warn: min_t truncates here '(sme->ssid_len)' (4294967295 vs 9223372036854775807) dhd_sdio.c +1275 brcmf_sdbrcm_rxglom(156) warn: min_t truncates here '(pfirst->len)' (2147483647 vs 4294967295) dhd_sdio.c +1457 brcmf_sdbrcm_rxglom(338) warn: min_t truncates here '(pfirst->len)' (2147483647 vs 4294967295) bcmsdh_sdmmc.c +300 brcmf_sdioh_request_buffer(10) warn: variable dereferenced before check 'pkt' (see line 295) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Use pr_fmt and pr_<level>Joe Perches2012-01-241-0/+3
| | | | | | | | | Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: exclude unnecessary header filesFranky Lin2011-12-191-2/+0
| | | | | | | | | | | This patch removes some headers files include lines from sdio layer code. This is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: move common layer bus interface context to dhd_bus.hFranky Lin2011-12-191-0/+1
| | | | | | | | | | | | dhd_bus.h is the header file for bus interface. Move functions declarations and brcmf_bus structure to there. This is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: move sdio related macros to sdio_host.hFranky Lin2011-12-191-0/+1
| | | | | | | | | | | | | dhd_bus.h will be used as the shared header file for common layer and bus layer. It should not contain any sdio specific macros. This patch moves them to sdio_host.h as part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: add bcm4330 supportFranky Lin2011-12-131-0/+2
| | | | | | | | | | | This patch adds support for bcm4330 chip which has a SDIO device id 0x4330. All basic functionalities of bcm4330 are supported by brcmfmac after this patch. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: save bus interface structure in function 2 deviceFranky Lin2011-12-131-12/+11
| | | | | | | | | | | | | | | | bus interface was stored in sdio card device. The device pointer is used as parameter of interface functions between common layer and bus layer to make the function declaration generic for different bus type. But the card device is a parent device layer for SDIO function devices. It doesn't contain all contexts needed by udev. This patch moves the shared structure to private driver data pointer of SDIO function 2 device which is more appopriate for net device and cfg80211 registration. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: small memory leak on errorDan Carpenter2011-11-301-1/+3
| | | | | | | | We should free "bus_if" here, it's a small leak but it makes the static checkers happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: introduce common bus interface struct brcmf_busFranky Lin2011-11-281-5/+18
| | | | | | | | | | | | | | struct brcmf_bus will contain function porinter, bus specific private structure pointer and interface context of generic layer and bus layer. It will be the only shared structure between generic and bus layer. This patch is part of fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: move module init/exit to sdio layerFranky Lin2011-11-281-5/+14
| | | | | | | | | | | This patch is part of the fullmac bus interface refactoring series. It moves the module init/exit code to bus layer. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: rename wait queue name to match using functionArend van Spriel2011-11-281-2/+6
| | | | | | | | | | | | The wait queue request_packet_wait was used in request_chain function and for sake of consistency it has been renamed to request_chain_wait. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: remove alignment check from brcmf_sdioh_request_buffer()Arend van Spriel2011-11-281-82/+18
| | | | | | | | | | | | The check for alignment is not valid anymore and can be removed. The function is collapsed with brcmf_sdioh_request_packet() as a consequence because it did not add much functionality any longer. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: simplify the brcmf_sdioh_request_buffer() functionArend van Spriel2011-11-281-28/+9
| | | | | | | | | | | | | | The function is only called with sk_buff parameter being non-zero so the prototype does not need to support passing a char buffer any longer. When the function is called with a NULL sk_buff parameter it returns -EINVAL now. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: remove width parameter from brcmf_sdioh_request_bufferArend van Spriel2011-11-281-2/+1
| | | | | | | | | | | | | The function brcmf_sdioh_request_buffer() was requiring a parameter in its prototype that was not used within the function. It has been removed consequently. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: fmac: separate receiving skb chain from other receive pathArend van Spriel2011-11-281-25/+72
| | | | | | | | | | | | | | In the receive path the buffer used to store the receive data from the device can be a chain of sk_buff. It has been separated to allow the use of skb queues. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: wireless: brcm80210: include module.hStephen Rothwell2011-10-141-0/+1
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: wireless: add brcm80211 driversArend van Spriel2011-10-111-0/+625
Add the brcm80211 tree to drivers/net/wireless, and disable the version that's in drivers/staging. This version includes the sources currently in staging, plus any changes that have been sent out for review. Sources in staging will be deleted in a followup patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.1 at 2025-08-16 00:07:47 +0000