blob: c870b6478ec81861ada145526dc8c0644b1806aa (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
VIA VT8500 Framebuffer
-----------------------------------------------------
Required properties:
- compatible : "via,vt8500-fb"
- reg : Should contain 1 register ranges(address and length)
- interrupts : framebuffer controller interrupt
- display: a phandle pointing to the display node
Required nodes:
- display: a display node is required to initialize the lcd panel
This should be in the board dts.
- default-mode: a videomode within the display with timing parameters
as specified below.
Example:
fb@d800e400 {
compatible = "via,vt8500-fb";
reg = <0xd800e400 0x400>;
interrupts = <12>;
display = <&display>;
default-mode = <&mode0>;
};
VIA VT8500 Display
-----------------------------------------------------
Required properties (as per of_videomode_helper):
- hactive, vactive: Display resolution
- hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
in pixels
vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
lines
- clock: displayclock in Hz
- bpp: lcd panel bit-depth.
<16> for RGB565, <32> for RGB888
Optional properties (as per of_videomode_helper):
- width-mm, height-mm: Display dimensions in mm
- hsync-active-high (bool): Hsync pulse is active high
- vsync-active-high (bool): Vsync pulse is active high
- interlaced (bool): This is an interlaced mode
- doublescan (bool): This is a doublescan mode
Example:
display: display@0 {
modes {
mode0: mode@0 {
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hfront-porch = <40>;
hsync-len = <0>;
vback-porch = <32>;
vfront-porch = <11>;
vsync-len = <1>;
clock = <0>; /* unused but required */
bpp = <16>; /* non-standard but required */
};
};
};
|
