path: root/drivers/net/ixp2000/ixp2400_rx.uc

/*
 * RX ucode for the Intel IXP2400 in POS-PHY mode.
 * Copyright (C) 2004, 2005 Lennert Buytenhek
 * Dedicated to Marija Kulikova.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * Assumptions made in this code:
 * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
 *   only one full element list is used.  This includes, for example,
 *   1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4.  (This
 *   is not an exhaustive list.)
 * - The RBUF uses 64-byte mpackets.
 * - RX descriptors reside in SRAM, and have the following format:
 *	struct rx_desc
 *	{
 *	// to uengine
 *		u32	buf_phys_addr;
 *		u32	buf_length;
 *
 *	// from uengine
 *		u32	channel;
 *		u32	pkt_length;
 *	};
 * - Packet data resides in DRAM.
 * - Packet buffer addresses are 8-byte aligned.
 * - Scratch ring 0 is rx_pending.
 * - Scratch ring 1 is rx_done, and has status condition 'full'.
 * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
 * - This code is run on all eight threads of the microengine it runs on.
 *
 * Local memory is used for per-channel RX state.
 */

#define RX_THREAD_FREELIST_0		0x0030
#define RBUF_ELEMENT_DONE		0x0044

#define CHANNEL_FLAGS			*l$index0[0]
#define CHANNEL_FLAG_RECEIVING		1
#define PACKET_LENGTH			*l$index0[1]
#define PACKET_CHECKSUM			*l$index0[2]
#define BUFFER_HANDLE			*l$index0[3]
#define BUFFER_START			*l$index0[4]
#define BUFFER_LENGTH			*l$index0[5]

#define CHANNEL_STATE_SIZE		24	// in bytes
#define CHANNEL_STATE_SHIFT		5	// ceil(log2(state size))


	.sig volatile sig1
	.sig volatile sig2
	.sig volatile sig3

	.sig mpacket_arrived
	.reg add_to_rx_freelist
	.reg read $rsw0, $rsw1
	.xfer_order $rsw0 $rsw1

	.reg zero

	/*
	 * Initialise add_to_rx_freelist.
	 */
	.begin
		.reg temp
		.reg temp2

		immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
		immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]

		local_csr_rd[ACTIVE_CTX_STS]
		immed[temp, 0]
		alu[temp2, temp, and, 0x1f]
		alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
		alu[temp2, temp, and, 0x80]
		alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
	.end

	immed[zero, 0]

	/*
	 * Skip context 0 initialisation?
	 */
	.begin
		br!=ctx[0, mpacket_receive_loop#]
	.end

	/*
	 * Initialise local memory.
	 */
	.begin
		.reg addr
		.reg temp

		immed[temp, 0]
	init_local_mem_loop#:
		alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
		local_csr_wr[ACTIVE_LM_ADDR_0, addr]
		nop
		nop
		nop

		immed[CHANNEL_FLAGS, 0]

		alu[temp, temp, +, 1]
		alu[--, temp, and, 0x20]
		beq[init_local_mem_loop#]
	.end

	/*
	 * Initialise signal pipeline.
	 */
	.begin
		local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
		.set_sig sig1

		local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
		.set_sig sig2

		local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
		.set_sig sig3
	.end

mpacket_receive_loop#:
	/*
	 * Synchronise and wait for mpacket.
	 */
	.begin
		ctx_arb[sig1]
		local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]

		msf[fast_wr, --, add_to_rx_freelist, 0]
		.set_sig mpacket_arrived
		ctx_arb[mpacket_arrived]
		.set $rsw0 $rsw1
	.end

	/*
	 * We halt if we see {inbparerr,parerr,null,soperror}.
	 */
	.begin
		alu_shf[--, 0x1b, and, $rsw0, >>8]
		bne[abort_rswerr#]
	.end

	/*
	 * Point local memory pointer to this channel's state area.
	 */
	.begin
		.reg chanaddr

		alu[chanaddr, $rsw0, and, 0x1f]
		alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
		local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
		nop
		nop
		nop
	.end

	/*
	 * Check whether we received a SOP mpacket while we were already
	 * working on a packet, or a non-SOP mpacket while there was no
	 * packet pending.  (SOP == RECEIVING -> abort)  If everything's
	 * okay, update the RECEIVING flag to reflect our new state.
	 */
	.begin
		.reg temp
		.reg eop

		#if CHANNEL_FLAG_RECEIVING != 1
		#error CHANNEL_FLAG_RECEIVING is not 1
		#endif

		alu_shf[temp, 1, and, $rsw0, >>15]
		alu[temp, temp, xor, CHANNEL_FLAGS]
		alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
		beq[abort_proterr#]

		alu_shf[eop, 1, and, $rsw0, >>14]
		alu[CHANNEL_FLAGS, temp, xor, eop]
	.end

	/*
	 * Copy the mpacket into the right spot, and in case of EOP,
	 * write back the descriptor and pass the packet on.
	 */
	.begin
		.reg buffer_offset
		.reg _packet_length
		.reg _packet_checksum
		.reg _buffer_handle
		.reg _buffer_start
		.reg _buffer_length

		/*
		 * Determine buffer_offset, _packet_length and
		 * _packet_checksum.
		 */
		.begin
			.reg temp

			alu[--, 1, and, $rsw0, >>15]
			beq[not_sop#]

			immed[PACKET_LENGTH, 0]
			immed[PACKET_CHECKSUM, 0]

		not_sop#:
			alu[buffer_offset, --, b, PACKET_LENGTH]
			alu_shf[temp, 0xff, and, $rsw0, >>16]
			alu[_packet_length, buffer_offset, +, temp]
			alu[PACKET_LENGTH, --, b, _packet_length]

			immed[temp, 0xffff]
			alu[temp, $rsw1, and, temp]
			alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
			alu[PACKET_CHECKSUM, --, b, _packet_checksum]
		.end

		/*
		 * Allocate buffer in case of SOP.
		 */
		.begin
			.reg temp

			alu[temp, 1, and, $rsw0, >>15]
			beq[skip_buffer_alloc#]

			.begin
				.sig zzz
				.reg read $stemp $stemp2
				.xfer_order $stemp $stemp2

			rx_nobufs#:
				scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
				alu[_buffer_handle, --, b, $stemp]
				beq[rx_nobufs#]

				sram[read, $stemp, _buffer_handle, 0, 2],
								ctx_swap[zzz]
				alu[_buffer_start, --, b, $stemp]
				alu[_buffer_length, --, b, $stemp2]
			.end

		skip_buffer_alloc#:
		.end

		/*
		 * Resynchronise.
		 */
		.begin
			ctx_arb[sig2]
			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
		.end

		/*
		 * Synchronise buffer state.
		 */
		.begin
			.reg temp

			alu[temp, 1, and, $rsw0, >>15]
			beq[copy_from_local_mem#]

			alu[BUFFER_HANDLE, --, b, _buffer_handle]
			alu[BUFFER_START, --, b, _buffer_start]
			alu[BUFFER_LENGTH, --, b, _buffer_length]
			br[sync_state_done#]

		copy_from_local_mem#:
			alu[_buffer_handle, --, b, BUFFER_HANDLE]
			alu[_buffer_start, --, b, BUFFER_START]
			alu[_buffer_length, --, b, BUFFER_LENGTH]

		sync_state_done#:
		.end

#if 0
		/*
		 * Debug buffer state management.
		 */
		.begin
			.reg temp

			alu[temp, 1, and, $rsw0, >>14]
			beq[no_poison#]
			immed[BUFFER_HANDLE, 0xdead]
			immed[BUFFER_START, 0xdead]
			immed[BUFFER_LENGTH, 0xdead]
		no_poison#:

			immed[temp, 0xdead]
			alu[--, _buffer_handle, -, temp]
			beq[state_corrupted#]
			alu[--, _buffer_start, -, temp]
			beq[state_corrupted#]
			alu[--, _buffer_length, -, temp]
			beq[state_corrupted#]
		.end
#endif

		/*
		 * Check buffer length.
		 */
		.begin
			alu[--, _buffer_length, -, _packet_length]
			blo[buffer_overflow#]
		.end

		/*
		 * Copy the mpacket and give back the RBUF element.
		 */
		.begin
			.reg element
			.reg xfer_size
			.reg temp
			.sig copy_sig

			alu_shf[element, 0x7f, and, $rsw0, >>24]
			alu_shf[xfer_size, 0xff, and, $rsw0, >>16]

			alu[xfer_size, xfer_size, -, 1]
			alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
			alu_shf[temp, 0x10, or, xfer_size, <<21]
			alu_shf[temp, temp, or, element, <<11]
			alu_shf[--, temp, or, 1, <<18]

			dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
						indirect_ref, sig_done[copy_sig]
			ctx_arb[copy_sig]

			alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
			msf[fast_wr, --, temp, 0]
		.end

		/*
		 * If EOP, write back the packet descriptor.
		 */
		.begin
			.reg write $stemp $stemp2
			.xfer_order $stemp $stemp2
			.sig zzz

			alu_shf[--, 1, and, $rsw0, >>14]
			beq[no_writeback#]

			alu[$stemp, $rsw0, and, 0x1f]
			alu[$stemp2, --, b, _packet_length]
			sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]

		no_writeback#:
		.end

		/*
		 * Resynchronise.
		 */
		.begin
			ctx_arb[sig3]
			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
		.end

		/*
		 * If EOP, put the buffer back onto the scratch ring.
		 */
		.begin
			.reg write $stemp
			.sig zzz

			br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]

			alu_shf[--, 1, and, $rsw0, >>14]
			beq[mpacket_receive_loop#]

			alu[--, 1, and, $rsw0, >>10]
			bne[rxerr#]

			alu[$stemp, --, b, _buffer_handle]
			scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
			cap[fast_wr, 0, XSCALE_INT_A]
			br[mpacket_receive_loop#]

		rxerr#:
			alu[$stemp, --, b, _buffer_handle]
			scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
			br[mpacket_receive_loop#]
		.end
	.end


abort_rswerr#:
	halt

abort_proterr#:
	halt

state_corrupted#:
	halt

buffer_overflow#:
	halt

rx_done_ring_overflow#:
	halt