aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@linux-foundation.org>2009-08-31 07:31:41 +0000
committerDavid S. Miller <davem@davemloft.net>2009-09-01 17:40:35 -0700
commit10547ae2c01acdace636e23c991b21fef05428b4 (patch)
tree1ed8172d59c93c533791bb338ba45d4541bde9e1
parent89f56d1e91cfa535ccc6cc60e9e12e02682fd972 (diff)
downloadkernel_samsung_aries-10547ae2c01acdace636e23c991b21fef05428b4.zip
kernel_samsung_aries-10547ae2c01acdace636e23c991b21fef05428b4.tar.gz
kernel_samsung_aries-10547ae2c01acdace636e23c991b21fef05428b4.tar.bz2
sky2: fix management of driver LED
Observed by Mike McCormack. The LED bit here is just a software controlled value used to turn on one of the LED's on some boards. The register value was wrong, which could have been causing some power control issues. Get rid of problematic define use the correct mask. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/sky2.c12
-rw-r--r--drivers/net/sky2.h9
2 files changed, 7 insertions, 14 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c7c0a5b..ba5180a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -256,6 +256,9 @@ static void sky2_power_on(struct sky2_hw *hw)
sky2_read32(hw, B2_GP_IO);
}
+
+ /* Turn on "driver loaded" LED */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
}
static void sky2_power_aux(struct sky2_hw *hw)
@@ -274,6 +277,9 @@ static void sky2_power_aux(struct sky2_hw *hw)
sky2_write8(hw, B0_POWER_CTRL,
(PC_VAUX_ENA | PC_VCC_ENA |
PC_VAUX_ON | PC_VCC_OFF));
+
+ /* turn off "driver loaded LED" */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
}
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
@@ -1867,9 +1873,6 @@ static int sky2_down(struct net_device *dev)
sky2_phy_power_down(hw, port);
spin_unlock_bh(&sky2->phy_lock);
- /* turn off LED's */
- sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
-
sky2_tx_reset(hw, port);
/* Free any pending frames stuck in HW queue */
@@ -2983,8 +2986,6 @@ static void sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
- sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
-
/* Turn off descriptor polling */
sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
@@ -4601,7 +4602,6 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
sky2_power_aux(hw);
- sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_read8(hw, B0_CTST);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 73c9547..34042ff 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -155,7 +155,7 @@ enum pci_cfg_reg1 {
enum csr_regs {
B0_RAP = 0x0000,
B0_CTST = 0x0004,
- B0_Y2LED = 0x0005,
+
B0_POWER_CTRL = 0x0007,
B0_ISRC = 0x0008,
B0_IMSK = 0x000c,
@@ -283,13 +283,6 @@ enum {
CS_RST_SET = 1, /* Set Software reset */
};
-/* B0_LED 8 Bit LED register */
-enum {
-/* Bit 7.. 2: reserved */
- LED_STAT_ON = 1<<1, /* Status LED on */
- LED_STAT_OFF = 1, /* Status LED off */
-};
-
/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
enum {
PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */