dm table: pass correct dev area size to device_area_is_valid

Incorrect device area lengths are being passed to device_area_is_valid().

The regression appeared in 2.6.31-rc1 through commit
754c5fc7ebb417b23601a6222a6005cc2e7f2913.

With the dm-stripe target, the size of the target (ti->len) was used
instead of the stripe_width (ti->len/#stripes).  An example of a
consequent incorrect error message is:

  device-mapper: table: 254:0: sdb too small for target

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

8 files changed, 17 insertions, 16 deletions

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 529e2ba..ed10381 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1318,7 +1318,7 @@ static int crypt_iterate_devices(struct dm_target *ti,
 {
 	struct crypt_config *cc = ti->private;
 
-	return fn(ti, cc->dev, cc->start, data);
+	return fn(ti, cc->dev, cc->start, ti->len, data);
 }
 
 static struct target_type crypt_target = {
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 4e5b843..ebe7381 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -324,12 +324,12 @@ static int delay_iterate_devices(struct dm_target *ti,
 	struct delay_c *dc = ti->private;
 	int ret = 0;
 
-	ret = fn(ti, dc->dev_read, dc->start_read, data);
+	ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
 	if (ret)
 		goto out;
 
 	if (dc->dev_write)
-		ret = fn(ti, dc->dev_write, dc->start_write, data);
+		ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
 
 out:
 	return ret;
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 9184b6de..82f7d6e 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -139,7 +139,7 @@ static int linear_iterate_devices(struct dm_target *ti,
 {
 	struct linear_c *lc = ti->private;
 
-	return fn(ti, lc->dev, lc->start, data);
+	return fn(ti, lc->dev, lc->start, ti->len, data);
 }
 
 static struct target_type linear_target = {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c70604a..6f0d90d 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1453,7 +1453,7 @@ static int multipath_iterate_devices(struct dm_target *ti,
 
 	list_for_each_entry(pg, &m->priority_groups, list) {
 		list_for_each_entry(p, &pg->pgpaths, list) {
-			ret = fn(ti, p->path.dev, ti->begin, data);
+			ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
 			if (ret)
 				goto out;
 		}
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 42a3e43..9726577 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1293,7 +1293,7 @@ static int mirror_iterate_devices(struct dm_target *ti,
 
 	for (i = 0; !ret && i < ms->nr_mirrors; i++)
 		ret = fn(ti, ms->mirror[i].dev,
-			 ms->mirror[i].offset, data);
+			 ms->mirror[i].offset, ti->len, data);
 
 	return ret;
 }
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b240e85..4e0e593 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,10 +320,11 @@ static int stripe_iterate_devices(struct dm_target *ti,
 	int ret = 0;
 	unsigned i = 0;
 
-	do
+	do {
 		ret = fn(ti, sc->stripe[i].dev,
-			 sc->stripe[i].physical_start, data);
-	while (!ret && ++i < sc->stripes);
+			 sc->stripe[i].physical_start,
+			 sc->stripe_width, data);
+	} while (!ret && ++i < sc->stripes);
 
 	return ret;
 }
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 5d16d06..d952b34 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -346,7 +346,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md)
  * If possible, this checks an area of a destination device is valid.
  */
 static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
-				sector_t start, void *data)
+				sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
@@ -359,7 +359,7 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
 	if (!dev_size)
 		return 1;
 
-	if ((start >= dev_size) || (start + ti->len > dev_size)) {
+	if ((start >= dev_size) || (start + len > dev_size)) {
 		DMWARN("%s: %s too small for target",
 		       dm_device_name(ti->table->md), bdevname(bdev, b));
 		return 0;
@@ -377,11 +377,11 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
 		return 0;
 	}
 
-	if (ti->len & (logical_block_size_sectors - 1)) {
+	if (len & (logical_block_size_sectors - 1)) {
 		DMWARN("%s: len=%llu not aligned to h/w "
 		       "logical block size %hu of %s",
 		       dm_device_name(ti->table->md),
-		       (unsigned long long)ti->len,
+		       (unsigned long long)len,
 		       limits->logical_block_size, bdevname(bdev, b));
 		return 0;
 	}
@@ -482,7 +482,7 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti,
 #define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
 
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data)
+			 sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d63106..655e772 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -84,7 +84,7 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
 
 typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
 					   struct dm_dev *dev,
-					   sector_t physical_start,
+					   sector_t start, sector_t len,
 					   void *data);
 
 typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
@@ -104,7 +104,7 @@ void dm_error(const char *message);
  * Combine device limits.
  */
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data);
+			 sector_t start, sector_t len, void *data);
 
 struct dm_dev {
 	struct block_device *bdev;