Merge branch 'x86/generalize-visws' into x86/core

36 files changed, 865 insertions, 909 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3b1b1da..2cfccc9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -181,12 +181,12 @@ config X86_64_SMP
 config X86_HT
 	bool
 	depends on SMP
-	depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || X86_64
+	depends on (X86_32 && !X86_VOYAGER) || X86_64
 	default y
 
 config X86_BIOS_REBOOT
 	bool
-	depends on !X86_VISWS && !X86_VOYAGER
+	depends on !X86_VOYAGER
 	default y
 
 config X86_TRAMPOLINE
@@ -232,13 +232,13 @@ config SMP
 
 config X86_FIND_SMP_CONFIG
 	def_bool y
-	depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS
+	depends on X86_MPPARSE || X86_VOYAGER
 
 if ACPI
 config X86_MPPARSE
 	def_bool y
 	bool "Enable MPS table"
-	depends on X86_LOCAL_APIC && !X86_VISWS
+	depends on X86_LOCAL_APIC
 	help
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
@@ -247,7 +247,7 @@ endif
 if !ACPI
 config X86_MPPARSE
 	def_bool y
-	depends on X86_LOCAL_APIC && !X86_VISWS
+	depends on X86_LOCAL_APIC
 endif
 
 choice
@@ -281,18 +281,6 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI
-	help
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
-
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will not run on PCs
-	  and vice versa. See <file:Documentation/sgi-visws.txt> for details.
-
 config X86_GENERICARCH
        bool "Generic architecture"
 	depends on X86_32
@@ -363,6 +351,18 @@ config X86_VSMP
 
 endchoice
 
+config X86_VISWS
+	bool "SGI 320/540 (Visual Workstation)"
+	depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
+	help
+	  The SGI Visual Workstation series is an IA32-based workstation
+	  based on SGI systems chips with some legacy PC hardware attached.
+
+	  Say Y here to create a kernel to run on the SGI 320 or 540.
+
+	  A kernel compiled for the Visual Workstation will run on general
+	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -391,7 +391,7 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
@@ -402,7 +402,7 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
@@ -413,7 +413,7 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	 This option enables various optimizations for running under the KVM
 	 hypervisor.
@@ -422,7 +422,7 @@ source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	help
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
@@ -628,7 +628,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+	depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -653,11 +653,11 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
+	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
 
 config X86_VISWS_APIC
 	def_bool y
@@ -711,7 +711,7 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
 	help
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
@@ -1414,7 +1414,7 @@ config X86_APM_BOOT
 
 menuconfig APM
 	tristate "APM (Advanced Power Management) BIOS support"
-	depends on X86_32 && PM_SLEEP && !X86_VISWS
+	depends on X86_32 && PM_SLEEP
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
@@ -1561,7 +1561,7 @@ config PCI
 
 choice
 	prompt "PCI access mode"
-	depends on X86_32 && PCI && !X86_VISWS
+	depends on X86_32 && PCI
 	default PCI_GOANY
 	---help---
 	  On PCI systems, the BIOS can be used to detect the PCI devices and
@@ -1598,12 +1598,12 @@ endchoice
 
 config PCI_BIOS
 	def_bool y
-	depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+	depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
 
 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
 config PCI_DIRECT
 	def_bool y
-	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
 
 config PCI_MMCONFIG
 	def_bool y
@@ -1663,7 +1663,7 @@ if X86_32
 
 config ISA
 	bool "ISA support"
-	depends on !(X86_VOYAGER || X86_VISWS)
+	depends on !X86_VOYAGER
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1690,7 +1690,7 @@ config EISA
 source "drivers/eisa/Kconfig"
 
 config MCA
-	bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
+	bool "MCA support" if !X86_VOYAGER
 	default y if X86_VOYAGER
 	help
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b03d24b..919ce21 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -113,10 +113,6 @@ mcore-y  := arch/x86/mach-default/
 mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
 mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 
-# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS)	:= -Iinclude/asm-x86/mach-visws
-mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws/
-
 # generic subarchitecture
 mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4033d8d..55ff016 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -19,6 +19,7 @@ obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y			+= traps_$(BITS).o irq_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
+obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
 obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 3e94720..3e58b67 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -974,7 +974,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 */
 	if (!apic_id_registered())
-		BUG();
+		WARN_ON_ONCE(1);
 
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 9f5002e..a5383ae 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1313,6 +1313,11 @@ void __init e820_reserve_resources(void)
 	}
 }
 
+/*
+ * Non-standard memory setup can be specified via this quirk:
+ */
+char * (*arch_memory_setup_quirk)(void);
+
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";
@@ -1353,6 +1358,12 @@ char *__init default_machine_specific_memory_setup(void)
 
 char *__init __attribute__((weak)) machine_specific_memory_setup(void)
 {
+	if (arch_memory_setup_quirk) {
+		char *who = arch_memory_setup_quirk();
+
+		if (who)
+			return who;
+	}
 	return default_machine_specific_memory_setup();
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 8b6b1e0..3b25e49 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -726,12 +726,22 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 static struct intel_mp_floating *mpf_found;
 
 /*
+ * Machine specific quirk for finding the SMP config before other setup
+ * activities destroy the table:
+ */
+int (*mach_get_smp_config_quirk)(unsigned int early);
+
+/*
  * Scan the memory blocks for an SMP configuration block.
  */
-static void __init __get_smp_config(unsigned early)
+static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
+	if (mach_get_smp_config_quirk) {
+		if (mach_get_smp_config_quirk(early))
+			return;
+	}
 	if (acpi_lapic && early)
 		return;
 	/*
@@ -889,10 +899,16 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-static void __init __find_smp_config(unsigned reserve)
+int (*mach_find_smp_config_quirk)(unsigned int reserve);
+
+static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
+	if (mach_find_smp_config_quirk) {
+		if (mach_find_smp_config_quirk(reserve))
+			return;
+	}
 	/*
 	 * FIXME: Linux assumes you have 640K of base ram..
 	 * this continues the error...
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 86fc2d6..987b6fd 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -596,6 +596,7 @@ void __init setup_arch(char **cmdline_p)
 {
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	visws_early_detect();
 	pre_setup_arch_hook();
 	early_cpu_init();
 #else
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
new file mode 100644
index 0000000..e94bdb6
--- /dev/null
+++ b/arch/x86/kernel/visws_quirks.c
@@ -0,0 +1,709 @@
+/*
+ *  SGI Visual Workstation support and quirks, unmaintained.
+ *
+ *  Split out from setup.c by davej@suse.de
+ *
+ *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ *  SGI Visual Workstation interrupt controller
+ *
+ *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ *  which serves as the main interrupt controller in the system.  Non-legacy
+ *  hardware in the system uses this controller directly.  Legacy devices
+ *  are connected to the PIIX4 which in turn has its 8259(s) connected to
+ *  a of the Cobalt APIC entry.
+ *
+ *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/visws/cobalt.h>
+#include <asm/visws/piix4.h>
+#include <asm/arch_hooks.h>
+#include <asm/fixmap.h>
+#include <asm/reboot.h>
+#include <asm/setup.h>
+#include <asm/e820.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+
+#include <mach_ipi.h>
+
+#include "mach_apic.h"
+
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+#include <asm/visws/piix4.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+extern int no_broadcast;
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+
+char visws_board_type	= -1;
+char visws_board_rev	= -1;
+
+int is_visws_box(void)
+{
+	return visws_board_type >= 0;
+}
+
+static int __init visws_time_init_quirk(void)
+{
+	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
+
+	/* Set the countdown value */
+	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
+
+	/* Start the timer */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
+
+	/* Enable (unmask) the timer interrupt */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
+
+	/*
+	 * Zero return means the generic timer setup code will set up
+	 * the standard vector:
+	 */
+	return 0;
+}
+
+static int __init visws_pre_intr_init_quirk(void)
+{
+	init_VISWS_APIC_irqs();
+
+	/*
+	 * We dont want ISA irqs to be set up by the generic code:
+	 */
+	return 1;
+}
+
+/* Quirk for machine specific memory setup. */
+
+#define MB (1024 * 1024)
+
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
+EXPORT_SYMBOL(sgivwfb_mem_phys);
+EXPORT_SYMBOL(sgivwfb_mem_size);
+
+long long mem_size __initdata = 0;
+
+static char * __init visws_memory_setup_quirk(void)
+{
+	long long gfx_mem_size = 8 * MB;
+
+	mem_size = boot_params.alt_mem_k;
+
+	if (!mem_size) {
+		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
+		mem_size = 128 * MB;
+	}
+
+	/*
+	 * this hardcodes the graphics memory to 8 MB
+	 * it really should be sized dynamically (or at least
+	 * set as a boot param)
+	 */
+	if (!sgivwfb_mem_size) {
+		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
+		sgivwfb_mem_size = 8 * MB;
+	}
+
+	/*
+	 * Trim to nearest MB
+	 */
+	sgivwfb_mem_size &= ~((1 << 20) - 1);
+	sgivwfb_mem_phys = mem_size - gfx_mem_size;
+
+	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
+	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
+
+	return "PROM";
+}
+
+static void visws_machine_emergency_restart(void)
+{
+	/*
+	 * Visual Workstations restart after this
+	 * register is poked on the PIIX4
+	 */
+	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+static void visws_machine_power_off(void)
+{
+	unsigned short pm_status;
+/*	extern unsigned int pci_bus0; */
+
+	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
+		outw(pm_status, PMSTS_PORT);
+
+	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+	mdelay(10);
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+/*	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
+	outl(PIIX_SPECIAL_STOP, 0xCFC);
+}
+
+static int __init visws_get_smp_config_quirk(unsigned int early)
+{
+	/*
+	 * Prevent MP-table parsing by the generic code:
+	 */
+	return 1;
+}
+
+extern unsigned int __cpuinitdata maxcpus;
+
+/*
+ * The Visual Workstation is Intel MP compliant in the hardware
+ * sense, but it doesn't have a BIOS(-configuration table).
+ * No problem for Linux.
+ */
+
+static void __init MP_processor_info (struct mpc_config_processor *m)
+{
+	int ver, logical_apicid;
+	physid_mask_t apic_cpus;
+
+	if (!(m->mpc_cpuflag & CPU_ENABLED))
+		return;
+
+	logical_apicid = m->mpc_apicid;
+	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
+	       m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver);
+
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
+		boot_cpu_physical_apicid = m->mpc_apicid;
+
+	ver = m->mpc_apicver;
+	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
+		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
+			m->mpc_apicid, MAX_APICS);
+		return;
+	}
+
+	apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
+	/*
+	 * Validate version
+	 */
+	if (ver == 0x0) {
+		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
+			"fixing up to 0x10. (tell your hw vendor)\n",
+			m->mpc_apicid);
+		ver = 0x10;
+	}
+	apic_version[m->mpc_apicid] = ver;
+}
+
+int __init visws_find_smp_config_quirk(unsigned int reserve)
+{
+	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
+	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
+
+	if (ncpus > CO_CPU_MAX) {
+		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
+			ncpus, mp);
+
+		ncpus = CO_CPU_MAX;
+	}
+
+	if (ncpus > maxcpus)
+		ncpus = maxcpus;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	smp_found_config = 1;
+#endif
+	while (ncpus--)
+		MP_processor_info(mp++);
+
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	return 1;
+}
+
+extern int visws_trap_init_quirk(void);
+
+void __init visws_early_detect(void)
+{
+	int raw;
+
+	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
+							 >> PIIX_GPI_BD_SHIFT;
+
+	if (visws_board_type < 0)
+		return;
+
+	/*
+	 * Install special quirks for timer, interrupt and memory setup:
+	 */
+	arch_time_init_quirk		= visws_time_init_quirk;
+	arch_pre_intr_init_quirk	= visws_pre_intr_init_quirk;
+	arch_memory_setup_quirk		= visws_memory_setup_quirk;
+
+	/*
+	 * Fall back to generic behavior for traps:
+	 */
+	arch_intr_init_quirk		= NULL;
+	arch_trap_init_quirk		= visws_trap_init_quirk;
+
+	/*
+	 * Install reboot quirks:
+	 */
+	pm_power_off			= visws_machine_power_off;
+	machine_ops.emergency_restart	= visws_machine_emergency_restart;
+
+	/*
+	 * Do not use broadcast IPIs:
+	 */
+	no_broadcast = 0;
+
+	/*
+	 * Override generic MP-table parsing:
+	 */
+	mach_get_smp_config_quirk	= visws_get_smp_config_quirk;
+	mach_find_smp_config_quirk	= visws_find_smp_config_quirk;
+
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Turn off IO-APIC detection and initialization:
+	 */
+	skip_ioapic_setup		= 1;
+#endif
+
+	/*
+	 * Get Board rev.
+	 * First, we have to initialize the 307 part to allow us access
+	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
+	 * after the PIIX4 PM section.
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
+
+	/*
+	 * Now, we have to map the power management section to write
+	 * a bit which enables access to the GPIO registers.
+	 * What lunatic came up with this shit?
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable PM registers. */
+
+	/*
+	 * Now, write the PM register which enables the GPIO registers.
+	 */
+	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
+	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
+
+	/*
+	 * Now, initialize the GPIO registers.
+	 * We want them all to be inputs which is the
+	 * power on default, so let's leave them alone.
+	 * So, let's just read the board rev!
+	 */
+	raw = inb_p(SIO_GP_DATA1);
+	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
+
+	if (visws_board_type == VISWS_320) {
+		if (raw < 0x6) {
+			visws_board_rev = 4;
+		} else if (raw < 0xc) {
+			visws_board_rev = 5;
+		} else {
+			visws_board_rev = 6;
+		}
+	} else if (visws_board_type == VISWS_540) {
+			visws_board_rev = 2;
+		} else {
+			visws_board_rev = raw;
+		}
+
+	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
+	       (visws_board_type == VISWS_320 ? "320" :
+	       (visws_board_type == VISWS_540 ? "540" :
+		"unknown")), visws_board_rev);
+}
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+	/*
+	 * On normal SMP PC this is used only with SMP, but we have to
+	 * use it and set it up here to start the Cobalt clock
+	 */
+	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+	setup_local_APIC();
+	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+		(unsigned int)apic_read(APIC_LVR),
+		(unsigned int)apic_read(APIC_ID));
+
+	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+	/* Enable Cobalt APIC being careful to NOT change the ID! */
+	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+		co_apic_read(CO_APIC_ID));
+}
+
+int __init visws_trap_init_quirk(void)
+{
+	lithium_init();
+	cobalt_init();
+
+	return 1;
+}
+
+/*
+ * IRQ controller / APIC support:
+ */
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+	co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+	extern char visws_board_type;
+	extern char visws_board_rev;
+
+	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+		return 5;
+	return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+	if (IS_CO_APIC(irq))
+		return CO_APIC(irq);
+
+	switch (irq) {
+		case 0: return CO_APIC_CPU;
+		case CO_IRQ_IDE0: return co_apic_ide0_hack();
+		case CO_IRQ_IDE1: return CO_APIC_IDE1;
+		default: return -1;
+	}
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+
+static void enable_cobalt_irq(unsigned int irq)
+{
+	co_apic_set(is_co_apic(irq), irq);
+}
+
+static void disable_cobalt_irq(unsigned int irq)
+{
+	int entry = is_co_apic(irq);
+
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+	co_apic_read(CO_APIC_LO(entry));
+}
+
+/*
+ * "irq" really just serves to identify the device.  Here is where we
+ * map this to the Cobalt APIC entry where it's physically wired.
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
+ */
+static unsigned int startup_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+	return 0;
+}
+
+static void ack_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	disable_cobalt_irq(irq);
+	apic_write(APIC_EOI, APIC_EIO_ACK);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static void end_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip cobalt_irq_type = {
+	.typename =	"Cobalt-APIC",
+	.startup =	startup_cobalt_irq,
+	.shutdown =	disable_cobalt_irq,
+	.enable =	enable_cobalt_irq,
+	.disable =	disable_cobalt_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(unsigned int irq)
+{
+	init_8259A(0);
+
+	return startup_cobalt_irq(irq);
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip piix4_master_irq_type = {
+	.typename =	"PIIX4-master",
+	.startup =	startup_piix4_master_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_piix4_master_irq,
+};
+
+
+static struct irq_chip piix4_virtual_irq_type = {
+	.typename =	"PIIX4-virtual",
+	.shutdown =	disable_8259A_irq,
+	.enable =	enable_8259A_irq,
+	.disable =	disable_8259A_irq,
+};
+
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id)
+{
+	int realirq;
+	irq_desc_t *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	/* Find out what's interrupting in the PIIX4 master 8259 */
+	outb(0x0c, 0x20);		/* OCW3 Poll command */
+	realirq = inb(0x20);
+
+	/*
+	 * Bit 7 == 0 means invalid/spurious
+	 */
+	if (unlikely(!(realirq & 0x80)))
+		goto out_unlock;
+
+	realirq &= 7;
+
+	if (unlikely(realirq == 2)) {
+		outb(0x0c, 0xa0);
+		realirq = inb(0xa0);
+
+		if (unlikely(!(realirq & 0x80)))
+			goto out_unlock;
+
+		realirq = (realirq & 7) + 8;
+	}
+
+	/* mask and ack interrupt */
+	cached_irq_mask |= 1 << realirq;
+	if (unlikely(realirq > 7)) {
+		inb(0xa1);
+		outb(cached_slave_mask, 0xa1);
+		outb(0x60 + (realirq & 7), 0xa0);
+		outb(0x60 + 2, 0x20);
+	} else {
+		inb(0x21);
+		outb(cached_master_mask, 0x21);
+		outb(0x60 + realirq, 0x20);
+	}
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	desc = irq_desc + realirq;
+
+	/*
+	 * handle this 'virtual interrupt' as a Cobalt one now.
+	 */
+	kstat_cpu(smp_processor_id()).irqs[realirq]++;
+
+	if (likely(desc->action != NULL))
+		handle_IRQ_event(realirq, desc->action);
+
+	if (!(desc->status & IRQ_DISABLED))
+		enable_8259A_irq(realirq);
+
+	return IRQ_HANDLED;
+
+out_unlock:
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+	.handler =	piix4_master_intr,
+	.name =		"PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+	.handler = 	no_action,
+	.name =		"cascade",
+};
+
+
+void init_VISWS_APIC_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+
+		if (i == 0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE1) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_8259) {
+			irq_desc[i].chip = &piix4_master_irq_type;
+		}
+		else if (i < CO_IRQ_APIC0) {
+			irq_desc[i].chip = &piix4_virtual_irq_type;
+		}
+		else if (IS_CO_APIC(i)) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+	}
+
+	setup_irq(CO_IRQ_8259, &master_action);
+	setup_irq(2, &cascade_action);
+}
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 964dfa3..c70e12b 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -3,7 +3,7 @@ config LGUEST_GUEST
 	select PARAVIRT
 	depends on X86_32
 	depends on !X86_PAE
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on !X86_VOYAGER
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 2f5e277..48278fa 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,6 +10,14 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
+/*
+ * Any quirks to be performed to initialize timers/irqs/etc?
+ */
+int (*arch_time_init_quirk)(void);
+int (*arch_pre_intr_init_quirk)(void);
+int (*arch_intr_init_quirk)(void);
+int (*arch_trap_init_quirk)(void);
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
@@ -29,6 +37,10 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
+	if (arch_pre_intr_init_quirk) {
+		if (arch_pre_intr_init_quirk())
+			return;
+	}
 	init_ISA_irqs();
 }
 
@@ -52,6 +64,10 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
+	if (arch_intr_init_quirk) {
+		if (arch_intr_init_quirk())
+			return;
+	}
 #ifdef CONFIG_X86_LOCAL_APIC
 	apic_intr_init();
 #endif
@@ -65,7 +81,7 @@ void __init intr_init_hook(void)
  *
  * Description:
  *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On VISWS
+ *	routines that may be needed before setup_arch() runs.  On Voyager
  *	this is used to get the board revision and type.
  **/
 void __init pre_setup_arch_hook(void)
@@ -81,6 +97,10 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
+	if (arch_trap_init_quirk) {
+		if (arch_trap_init_quirk())
+			return;
+	}
 }
 
 static struct irqaction irq0  = {
@@ -99,6 +119,16 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
+	if (arch_time_init_quirk) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (arch_time_init_quirk())
+			return;
+	}
+
 	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
diff --git a/arch/x86/mach-visws/Makefile b/arch/x86/mach-visws/Makefile
deleted file mode 100644
index 835fd96..0000000
--- a/arch/x86/mach-visws/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o traps.o reboot.o
-
-obj-$(CONFIG_X86_VISWS_APIC)	+= visws_apic.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= mpparse.o
diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c
deleted file mode 100644
index a2fb78c..0000000
--- a/arch/x86/mach-visws/mpparse.c
+++ /dev/null
@@ -1,85 +0,0 @@
-
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/smp.h>
-#include <asm/io.h>
-
-#include "cobalt.h"
-#include "mach_apic.h"
-
-extern unsigned int __cpuinitdata maxcpus;
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info (struct mpc_config_processor *m)
-{
-	int ver, logical_apicid;
-	physid_mask_t apic_cpus;
-
-	if (!(m->mpc_cpuflag & CPU_ENABLED))
-		return;
-
-	logical_apicid = m->mpc_apicid;
-	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
-	       m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver);
-
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
-		boot_cpu_physical_apicid = m->mpc_apicid;
-
-	ver = m->mpc_apicver;
-	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
-		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->mpc_apicid, MAX_APICS);
-		return;
-	}
-
-	apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
-			"fixing up to 0x10. (tell your hw vendor)\n",
-			m->mpc_apicid);
-		ver = 0x10;
-	}
-	apic_version[m->mpc_apicid] = ver;
-}
-
-void __init find_smp_config(void)
-{
-	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
-	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
-	if (ncpus > CO_CPU_MAX) {
-		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
-			ncpus, mp);
-
-		ncpus = CO_CPU_MAX;
-	}
-
-	if (ncpus > maxcpus)
-		ncpus = maxcpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	smp_found_config = 1;
-#endif
-	while (ncpus--)
-		MP_processor_info(mp++);
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-void __init get_smp_config (void)
-{
-}
diff --git a/arch/x86/mach-visws/reboot.c b/arch/x86/mach-visws/reboot.c
deleted file mode 100644
index 99332ab..0000000
--- a/arch/x86/mach-visws/reboot.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include "piix4.h"
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-void machine_shutdown(void)
-{
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
-}
-
-void machine_emergency_restart(void)
-{
-	/*
-	 * Visual Workstations restart after this
-	 * register is poked on the PIIX4
-	 */
-	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-void machine_restart(char * __unused)
-{
-	machine_shutdown();
-	machine_emergency_restart();
-}
-
-void machine_power_off(void)
-{
-	unsigned short pm_status;
-	extern unsigned int pci_bus0;
-
-	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
-		outw(pm_status, PMSTS_PORT);
-
-	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
-	mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8);
-	outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-void machine_halt(void)
-{
-}
-
diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c
deleted file mode 100644
index d67868e..0000000
--- a/arch/x86/mach-visws/setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  Unmaintained SGI Visual Workstation support.
- *  Split out from setup.c by davej@suse.de
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/fixmap.h>
-#include <asm/arch_hooks.h>
-#include <asm/io.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include "cobalt.h"
-#include "piix4.h"
-
-int no_broadcast;
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-void __init visws_get_board_type_and_rev(void)
-{
-	int raw;
-
-	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
-							 >> PIIX_GPI_BD_SHIFT;
-	/*
-	 * Get Board rev.
-	 * First, we have to initialize the 307 part to allow us access
-	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
-	 * after the PIIX4 PM section.
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
-
-	/*
-	 * Now, we have to map the power management section to write
-	 * a bit which enables access to the GPIO registers.
-	 * What lunatic came up with this shit?
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable PM registers. */
-
-	/*
-	 * Now, write the PM register which enables the GPIO registers.
-	 */
-	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
-	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
-	/*
-	 * Now, initialize the GPIO registers.
-	 * We want them all to be inputs which is the
-	 * power on default, so let's leave them alone.
-	 * So, let's just read the board rev!
-	 */
-	raw = inb_p(SIO_GP_DATA1);
-	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
-
-	if (visws_board_type == VISWS_320) {
-		if (raw < 0x6) {
-			visws_board_rev = 4;
-		} else if (raw < 0xc) {
-			visws_board_rev = 5;
-		} else {
-			visws_board_rev = 6;
-		}
-	} else if (visws_board_type == VISWS_540) {
-			visws_board_rev = 2;
-		} else {
-			visws_board_rev = raw;
-		}
-
-	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
-	       (visws_board_type == VISWS_320 ? "320" :
-	       (visws_board_type == VISWS_540 ? "540" :
-		"unknown")), visws_board_rev);
-}
-
-void __init pre_intr_init_hook(void)
-{
-	init_VISWS_APIC_irqs();
-}
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-}
-
-void __init pre_setup_arch_hook()
-{
-	visws_get_board_type_and_rev();
-}
-
-static struct irqaction irq0 = {
-	.handler =	timer_interrupt,
-	.flags =	IRQF_DISABLED | IRQF_IRQPOLL,
-	.name =		"timer",
-};
-
-void __init time_init_hook(void)
-{
-	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
-	/* Set the countdown value */
-	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
-	/* Start the timer */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
-	/* Enable (unmask) the timer interrupt */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
-	/* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-char * __init machine_specific_memory_setup(void)
-{
-	long long gfx_mem_size = 8 * MB;
-
-	mem_size = boot_params.alt_mem_k;
-
-	if (!mem_size) {
-		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
-		mem_size = 128 * MB;
-	}
-
-	/*
-	 * this hardcodes the graphics memory to 8 MB
-	 * it really should be sized dynamically (or at least
-	 * set as a boot param)
-	 */
-	if (!sgivwfb_mem_size) {
-		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
-		sgivwfb_mem_size = 8 * MB;
-	}
-
-	/*
-	 * Trim to nearest MB
-	 */
-	sgivwfb_mem_size &= ~((1 << 20) - 1);
-	sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
-	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
-	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
-	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
-	return "PROM";
-}
diff --git a/arch/x86/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
deleted file mode 100644
index bfac6ba..0000000
--- a/arch/x86/mach-visws/traps.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* VISWS traps */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include <asm/io.h>
-#include <asm/arch_hooks.h>
-#include <asm/apic.h>
-#include "cobalt.h"
-#include "lithium.h"
-
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
-	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
-	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
-	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-		panic("This machine is not SGI Visual Workstation 320/540");
-	}
-
-	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-		panic("This machine is not SGI Visual Workstation 320/540");
-	}
-
-	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
-	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
-	/*
-	 * On normal SMP PC this is used only with SMP, but we have to
-	 * use it and set it up here to start the Cobalt clock
-	 */
-	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
-	setup_local_APIC();
-	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
-		(unsigned int)apic_read(APIC_LVR),
-		(unsigned int)apic_read(APIC_ID));
-
-	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
-	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
-	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
-		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
-	/* Enable Cobalt APIC being careful to NOT change the ID! */
-	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
-	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
-		co_apic_read(CO_APIC_ID));
-}
-
-void __init trap_init_hook(void)
-{
-	lithium_init();
-	cobalt_init();
-}
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
deleted file mode 100644
index d8b2cfd..0000000
--- a/arch/x86/mach-visws/visws_apic.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- *  SGI Visual Workstation interrupt controller
- *
- *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- *  which serves as the main interrupt controller in the system.  Non-legacy
- *  hardware in the system uses this controller directly.  Legacy devices
- *  are connected to the PIIX4 which in turn has its 8259(s) connected to
- *  a of the Cobalt APIC entry.
- *
- *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-
-#include "cobalt.h"
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
-	co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
-	extern char visws_board_type;
-	extern char visws_board_rev;
-
-	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
-		return 5;
-	return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
-	if (IS_CO_APIC(irq))
-		return CO_APIC(irq);
-
-	switch (irq) {
-		case 0: return CO_APIC_CPU;
-		case CO_IRQ_IDE0: return co_apic_ide0_hack();
-		case CO_IRQ_IDE1: return CO_APIC_IDE1;
-		default: return -1;
-	}
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-
-static void enable_cobalt_irq(unsigned int irq)
-{
-	co_apic_set(is_co_apic(irq), irq);
-}
-
-static void disable_cobalt_irq(unsigned int irq)
-{
-	int entry = is_co_apic(irq);
-
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
-	co_apic_read(CO_APIC_LO(entry));
-}
-
-/*
- * "irq" really just serves to identify the device.  Here is where we
- * map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_irq -> irq_desc->startup()
- */
-static unsigned int startup_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
-		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
-	enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-	return 0;
-}
-
-static void ack_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	disable_cobalt_irq(irq);
-	apic_write(APIC_EOI, APIC_EIO_ACK);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static void end_cobalt_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
-	.typename =	"Cobalt-APIC",
-	.startup =	startup_cobalt_irq,
-	.shutdown =	disable_cobalt_irq,
-	.enable =	enable_cobalt_irq,
-	.disable =	disable_cobalt_irq,
-	.ack =		ack_cobalt_irq,
-	.end =		end_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(unsigned int irq)
-{
-	init_8259A(0);
-
-	return startup_cobalt_irq(irq);
-}
-
-static void end_piix4_master_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	enable_cobalt_irq(irq);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
-	.typename =	"PIIX4-master",
-	.startup =	startup_piix4_master_irq,
-	.ack =		ack_cobalt_irq,
-	.end =		end_piix4_master_irq,
-};
-
-
-static struct irq_chip piix4_virtual_irq_type = {
-	.typename =	"PIIX4-virtual",
-	.shutdown =	disable_8259A_irq,
-	.enable =	enable_8259A_irq,
-	.disable =	disable_8259A_irq,
-};
-
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
-	int realirq;
-	irq_desc_t *desc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	/* Find out what's interrupting in the PIIX4 master 8259 */
-	outb(0x0c, 0x20);		/* OCW3 Poll command */
-	realirq = inb(0x20);
-
-	/*
-	 * Bit 7 == 0 means invalid/spurious
-	 */
-	if (unlikely(!(realirq & 0x80)))
-		goto out_unlock;
-
-	realirq &= 7;
-
-	if (unlikely(realirq == 2)) {
-		outb(0x0c, 0xa0);
-		realirq = inb(0xa0);
-
-		if (unlikely(!(realirq & 0x80)))
-			goto out_unlock;
-
-		realirq = (realirq & 7) + 8;
-	}
-
-	/* mask and ack interrupt */
-	cached_irq_mask |= 1 << realirq;
-	if (unlikely(realirq > 7)) {
-		inb(0xa1);
-		outb(cached_slave_mask, 0xa1);
-		outb(0x60 + (realirq & 7), 0xa0);
-		outb(0x60 + 2, 0x20);
-	} else {
-		inb(0x21);
-		outb(cached_master_mask, 0x21);
-		outb(0x60 + realirq, 0x20);
-	}
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	desc = irq_desc + realirq;
-
-	/*
-	 * handle this 'virtual interrupt' as a Cobalt one now.
-	 */
-	kstat_cpu(smp_processor_id()).irqs[realirq]++;
-
-	if (likely(desc->action != NULL))
-		handle_IRQ_event(realirq, desc->action);
-
-	if (!(desc->status & IRQ_DISABLED))
-		enable_8259A_irq(realirq);
-
-	return IRQ_HANDLED;
-
-out_unlock:
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-	return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
-	.handler =	piix4_master_intr,
-	.name =		"PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
-	.handler = 	no_action,
-	.name =		"cascade",
-};
-
-
-void init_VISWS_APIC_irqs(void)
-{
-	int i;
-
-	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
-		irq_desc[i].depth = 1;
-
-		if (i == 0) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_IDE0) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_IDE1) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-		else if (i == CO_IRQ_8259) {
-			irq_desc[i].chip = &piix4_master_irq_type;
-		}
-		else if (i < CO_IRQ_APIC0) {
-			irq_desc[i].chip = &piix4_virtual_irq_type;
-		}
-		else if (IS_CO_APIC(i)) {
-			irq_desc[i].chip = &cobalt_irq_type;
-		}
-	}
-
-	setup_irq(CO_IRQ_8259, &master_action);
-	setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 99d9f09..e515e8d 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -9,9 +9,7 @@ pci-y				:= fixup.o
 pci-$(CONFIG_ACPI)		+= acpi.o
 pci-y				+= legacy.o irq.o
 
-# Careful: VISWS overrule the pci-y above. The colons are
-# therefor correct. This needs a proper fix by distangling the code.
-pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o
+pci-$(CONFIG_X86_VISWS)		+= visws.o
 
 pci-$(CONFIG_X86_NUMAQ)		+= numa.o
 
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 3c1d795..132876c 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -62,6 +62,11 @@ int __init pci_subsys_init(void)
 #endif
 	pci_legacy_init();
 	pcibios_irq_init();
+#ifdef CONFIG_X86_NUMAQ
+	pci_numa_init();
+#endif
 	pcibios_init();
+
+	return 0;
 }
 subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
index e1620dc..8b5ca19 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numa.c
@@ -151,7 +151,7 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
 
-static int __init pci_numa_init(void)
+int __init pci_numa_init(void)
 {
 	int quad;
 
@@ -176,11 +176,3 @@ static int __init pci_numa_init(void)
 		}
 	return 0;
 }
-
-static __init int pci_subsys_init(void)
-{
-	pci_numa_init();
-	pcibios_irq_init();
-	pcibios_init();
-}
-subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 5824174..b2270a5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -107,6 +107,7 @@ extern void __init dmi_check_skip_isa_align(void);
 /* some common used subsys_initcalls */
 extern int __init pci_acpi_init(void);
 extern int __init pcibios_irq_init(void);
+extern int __init pci_numa_init(void);
 extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 16e5206..1a7bed4 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -8,18 +8,19 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include "cobalt.h"
-#include "lithium.h"
+#include <asm/setup.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
 
 #include "pci.h"
 
 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
 static void pci_visws_disable_irq(struct pci_dev *dev) { }
 
-int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
-void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
+/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
+/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
 
-void __init pcibios_penalize_isa_irq(int irq, int active) {}
+/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
 
 
 unsigned int pci_bus0, pci_bus1;
@@ -107,7 +108,15 @@ static int __init pci_visws_init(void)
 
 static __init int pci_subsys_init(void)
 {
+	if (!is_visws_box())
+		return -1;
+
+	pcibios_enable_irq = &pci_visws_enable_irq;
+	pcibios_disable_irq = &pci_visws_disable_irq;
+
 	pci_visws_init();
 	pcibios_init();
+
+	return 0;
 }
 subsys_initcall(pci_subsys_init);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 860f15f..bba8673 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig ACPI
 	bool "ACPI (Advanced Configuration and Power Interface) Support"
-	depends on !X86_VISWS
 	depends on !IA64_HP_SIM
 	depends on IA64 || X86
 	depends on PCI
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 6b8dbb9..76f2b36 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX && !(X86_VISWS || X86_VOYAGER)
+	depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX && !X86_VOYAGER
 	select HVC_DRIVER
 	---help---
 	  This is a very simple module which allows you to run
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index 4fb1624..f5252c2 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -21,8 +21,7 @@
 
 #include <asm/io.h>
 #include <asm/mtrr.h>
-
-#include <setup_arch.h>
+#include <asm/visws/sgivw.h>
 
 #define INCLUDE_TIMING_TABLE_DATA
 #define DBE_REG_BASE par->regs
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
index b58581e..0ac864e 100644
--- a/include/asm-x86/irq_vectors.h
+++ b/include/asm-x86/irq_vectors.h
@@ -107,9 +107,9 @@
 #define LAST_VM86_IRQ		15
 #define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
 
-#if !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER)
+#if !defined(CONFIG_X86_VOYAGER)
 
-# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT)
+# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
 
 #  define NR_IRQS		224
 
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index b63c521..56d001b 100644
--- a/include/asm-x86/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
@@ -3,7 +3,9 @@
 
 static inline void smpboot_clear_io_apic_irqs(void)
 {
+#ifdef CONFIG_X86_IO_APIC
 	io_apic_irqs = 0;
+#endif
 }
 
 static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
@@ -35,6 +37,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
 
 static inline void __init smpboot_setup_io_apic(void)
 {
+#ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Here we can be sure that there is an IO-APIC in the system. Let's
 	 * go and set it up:
@@ -45,9 +48,12 @@ static inline void __init smpboot_setup_io_apic(void)
 		nr_ioapics = 0;
 		localise_nmi_watchdog();
 	}
+#endif
 }
 
 static inline void smpboot_clear_io_apic(void)
 {
+#ifdef CONFIG_X86_IO_APIC
 	nr_ioapics = 0;
+#endif
 }
diff --git a/include/asm-x86/mach-visws/mach_apic.h b/include/asm-x86/mach-visws/mach_apic.h
index a9ef33a..6943e7a 100644
--- a/include/asm-x86/mach-visws/mach_apic.h
+++ b/include/asm-x86/mach-visws/mach_apic.h
@@ -1,103 +1 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#include <mach_apicdef.h>
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
-
-#define no_balance_irq (0)
-#define esr_disable (0)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-
-#ifdef CONFIG_SMP
- #define TARGET_CPUS cpu_online_map
-#else
- #define TARGET_CPUS cpumask_of_cpu(0)
-#endif
-
-#define check_apicid_used(bitmap, apicid)	physid_isset(apicid, bitmap)
-#define check_apicid_present(bit)		physid_isset(bit, phys_cpu_present_map)
-
-static inline int apic_id_registered(void)
-{
-	return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write_around(APIC_LDR, val);
-}
-
-static inline void summit_check(char *oem, char *productid) 
-{
-}
-
-static inline void setup_apic_routing(void)
-{
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	return 1 << cpu;
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < get_physical_broadcast())
-		return mps_cpu;
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(apicid);
-}
-
-#define WAKE_SECONDARY_VIA_INIT
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	return cpus_addr(cpumask)[0];
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
+#include "../mach-default/mach_apic.h"
diff --git a/include/asm-x86/mach-visws/mach_apicdef.h b/include/asm-x86/mach-visws/mach_apicdef.h
index 826cfa9..42711d1 100644
--- a/include/asm-x86/mach-visws/mach_apicdef.h
+++ b/include/asm-x86/mach-visws/mach_apicdef.h
@@ -1,12 +1 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define         APIC_ID_MASK            (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	        return (((x)>>24)&0xF);
-}
-#define         GET_APIC_ID(x)  get_apic_id(x)
-
-#endif
+#include "../mach-default/mach_apicdef.h"
diff --git a/include/asm-x86/mach-visws/setup_arch.h b/include/asm-x86/mach-visws/setup_arch.h
index b8f5dd8..fa4766c 100644
--- a/include/asm-x86/mach-visws/setup_arch.h
+++ b/include/asm-x86/mach-visws/setup_arch.h
@@ -1,6 +1 @@
-/* Hook to call BIOS initialisation function */
-
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;
-
-/* no action for visws */
+#include "../mach-default/setup_arch.h"
diff --git a/include/asm-x86/mach-visws/smpboot_hooks.h b/include/asm-x86/mach-visws/smpboot_hooks.h
index c9b83e3..e4433ca 100644
--- a/include/asm-x86/mach-visws/smpboot_hooks.h
+++ b/include/asm-x86/mach-visws/smpboot_hooks.h
@@ -1,28 +1 @@
-static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
-{
-	CMOS_WRITE(0xa, 0xf);
-	local_flush_tlb();
-	Dprintk("1.\n");
-	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
-	Dprintk("2.\n");
-	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
-	Dprintk("3.\n");
-}
-
-/* for visws do nothing for any of these */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-}
-
-static inline void smpboot_restore_warm_reset_vector(void)
-{
-}
-
-static inline void smpboot_setup_io_apic(void)
-{
-}
-
-static inline void smpboot_clear_io_apic(void)
-{
-}
+#include "../mach-default/smpboot_hooks.h"
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index 1d121c6..90ab222 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -8,6 +8,25 @@
 /* Interrupt control for vSMPowered x86_64 systems */
 void vsmp_init(void);
 
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+/*
+ * Any setup quirks to be performed?
+ */
+extern int (*arch_time_init_quirk)(void);
+extern int (*arch_pre_intr_init_quirk)(void);
+extern int (*arch_intr_init_quirk)(void);
+extern int (*arch_trap_init_quirk)(void);
+extern char * (*arch_memory_setup_quirk)(void);
+extern int (*mach_get_smp_config_quirk)(unsigned int early);
+extern int (*mach_find_smp_config_quirk)(unsigned int reserve);
+
 #ifndef CONFIG_PARAVIRT
 #define paravirt_post_allocator_init()	do {} while (0)
 #endif
diff --git a/include/asm-x86/mach-visws/cobalt.h b/include/asm-x86/visws/cobalt.h
index 9952588..9952588 100644
--- a/include/asm-x86/mach-visws/cobalt.h
+++ b/include/asm-x86/visws/cobalt.h
diff --git a/include/asm-x86/mach-visws/lithium.h b/include/asm-x86/visws/lithium.h
index dfcd4f0..dfcd4f0 100644
--- a/include/asm-x86/mach-visws/lithium.h
+++ b/include/asm-x86/visws/lithium.h
diff --git a/include/asm-x86/mach-visws/piix4.h b/include/asm-x86/visws/piix4.h
index 83ea4f4..83ea4f4 100644
--- a/include/asm-x86/mach-visws/piix4.h
+++ b/include/asm-x86/visws/piix4.h
diff --git a/include/asm-x86/visws/sgivw.h b/include/asm-x86/visws/sgivw.h
new file mode 100644
index 0000000..5fbf63e
--- /dev/null
+++ b/include/asm-x86/visws/sgivw.h
@@ -0,0 +1,5 @@
+/*
+ * Frame buffer position and size:
+ */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
index 2c5aaa5..dcbb3f7 100644
--- a/sound/oss/vwsnd.c
+++ b/sound/oss/vwsnd.c
@@ -150,7 +150,7 @@
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 
-#include <asm/mach-visws/cobalt.h>
+#include <asm/visws/cobalt.h>
 
 #include "sound_config.h"