diff options
author | Bryan O'Sullivan <bos@pathscale.com> | 2006-09-28 09:00:18 -0700 |
---|---|---|
committer | Roland Dreier <rolandd@cisco.com> | 2006-09-28 11:17:03 -0700 |
commit | 89d1e09b6a6d844ef327937f41658a426be42501 (patch) | |
tree | 5730241c737baf67b0b1ddf89ff38f6936d649c4 | |
parent | 510847750c9d26052a71631e0fcad9e7f7a5f369 (diff) | |
download | kernel_samsung_aries-89d1e09b6a6d844ef327937f41658a426be42501.zip kernel_samsung_aries-89d1e09b6a6d844ef327937f41658a426be42501.tar.gz kernel_samsung_aries-89d1e09b6a6d844ef327937f41658a426be42501.tar.bz2 |
IB/ipath: Fix and recover TXE piobuf and PBC parity errors
We can sometimes trigger parity errors due to processor speculative
reads to our write-combined memory (mostly seen on Woodcrest). Add a
stats counter for these.
Factored out the sendbuffererror buffer cancellation code so it can be
used in the new handling; suppress likely subsequent error messages if
within two jiffies of the cancellation.
Also restore 2 dropped TXE lines on hwe_bitsextant noticed while
debugging.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_common.h | 3 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6110.c | 32 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6120.c | 37 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_intr.c | 98 | ||||
-rw-r--r-- | drivers/infiniband/hw/ipath/ipath_kernel.h | 6 |
5 files changed, 124 insertions, 52 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index 382956d..a9b109a 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -141,8 +141,9 @@ struct infinipath_stats { * packets if ipath not configured, etc.) */ __u64 sps_krdrops; + __u64 sps_txeparity; /* PIO buffer parity error, recovered */ /* pad for future growth */ - __u64 __sps_pad[46]; + __u64 __sps_pad[45]; }; /* diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index fd49c9c..9e4e8d4 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -451,7 +451,10 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg, * make sure we get this much out, unless told to be quiet, * or it's occurred within the last 5 seconds */ - if ((hwerrs & ~dd->ipath_lasthwerror) || + if ((hwerrs & ~(dd->ipath_lasthwerror | + ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) || (ipath_debug & __IPATH_VERBDBG)) dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx " "(cleared)\n", (unsigned long long) hwerrs); @@ -464,6 +467,33 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg, ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); if (ctrl & INFINIPATH_C_FREEZEMODE) { + /* + * parity errors in send memory are recoverable, + * just cancel the send (if indicated in * sendbuffererror), + * count the occurrence, unfreeze (if no other handled + * hardware error bits are set), and continue. They can + * occur if a processor speculative read is done to the PIO + * buffer while we are sending a packet, for example. + */ + if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) { + ipath_stats.sps_txeparity++; + ipath_dbg("Recovering from TXE parity error (%llu), " + "hwerrstatus=%llx\n", + (unsigned long long) ipath_stats.sps_txeparity, + (unsigned long long) hwerrs); + ipath_disarm_senderrbufs(dd); + hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT); + if (!hwerrs) { /* else leave in freeze mode */ + ipath_write_kreg(dd, + dd->ipath_kregs->kr_control, + dd->ipath_control); + return; + } + } if (hwerrs) { /* * if any set that we aren't ignoring; only diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 08a44dd..024b6aa 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -370,7 +370,10 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, * make sure we get this much out, unless told to be quiet, * or it's occurred within the last 5 seconds */ - if ((hwerrs & ~dd->ipath_lasthwerror) || + if ((hwerrs & ~(dd->ipath_lasthwerror | + ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) || (ipath_debug & __IPATH_VERBDBG)) dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx " "(cleared)\n", (unsigned long long) hwerrs); @@ -383,6 +386,33 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control); if (ctrl & INFINIPATH_C_FREEZEMODE) { + /* + * parity errors in send memory are recoverable, + * just cancel the send (if indicated in * sendbuffererror), + * count the occurrence, unfreeze (if no other handled + * hardware error bits are set), and continue. They can + * occur if a processor speculative read is done to the PIO + * buffer while we are sending a packet, for example. + */ + if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) { + ipath_stats.sps_txeparity++; + ipath_dbg("Recovering from TXE parity error (%llu), " + "hwerrstatus=%llx\n", + (unsigned long long) ipath_stats.sps_txeparity, + (unsigned long long) hwerrs); + ipath_disarm_senderrbufs(dd); + hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | + INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) + << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT); + if (!hwerrs) { /* else leave in freeze mode */ + ipath_write_kreg(dd, + dd->ipath_kregs->kr_control, + dd->ipath_control); + return; + } + } if (hwerrs) { /* * if any set that we aren't ignoring only make the @@ -406,9 +436,8 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, } else { ipath_dbg("Clearing freezemode on ignored hardware " "error\n"); - ctrl &= ~INFINIPATH_C_FREEZEMODE; ipath_write_kreg(dd, dd->ipath_kregs->kr_control, - ctrl); + dd->ipath_control); } } @@ -880,6 +909,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_hwe_bitsextant = (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) | + (INFINIPATH_HWE_TXEMEMPARITYERR_MASK << + INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) | (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) | INFINIPATH_HWE_PCIE1PLLFAILED | diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index f4d8aaf..6bee53c 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -37,6 +37,50 @@ #include "ipath_verbs.h" #include "ipath_common.h" +/* + * Called when we might have an error that is specific to a particular + * PIO buffer, and may need to cancel that buffer, so it can be re-used. + */ +void ipath_disarm_senderrbufs(struct ipath_devdata *dd) +{ + u32 piobcnt; + unsigned long sbuf[4]; + /* + * it's possible that sendbuffererror could have bits set; might + * have already done this as a result of hardware error handling + */ + piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k; + /* read these before writing errorclear */ + sbuf[0] = ipath_read_kreg64( + dd, dd->ipath_kregs->kr_sendbuffererror); + sbuf[1] = ipath_read_kreg64( + dd, dd->ipath_kregs->kr_sendbuffererror + 1); + if (piobcnt > 128) { + sbuf[2] = ipath_read_kreg64( + dd, dd->ipath_kregs->kr_sendbuffererror + 2); + sbuf[3] = ipath_read_kreg64( + dd, dd->ipath_kregs->kr_sendbuffererror + 3); + } + + if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) { + int i; + if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG)) { + __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG, + "SendbufErrs %lx %lx", sbuf[0], + sbuf[1]); + if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128) + printk(" %lx %lx ", sbuf[2], sbuf[3]); + printk("\n"); + } + + for (i = 0; i < piobcnt; i++) + if (test_bit(i, sbuf)) + ipath_disarm_piobufs(dd, i, 1); + dd->ipath_lastcancel = jiffies+3; /* no armlaunch for a bit */ + } +} + + /* These are all rcv-related errors which we want to count for stats */ #define E_SUM_PKTERRS \ (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \ @@ -68,53 +112,9 @@ static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs) { - unsigned long sbuf[4]; u64 ignore_this_time = 0; - u32 piobcnt; - - /* if possible that sendbuffererror could be valid */ - piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k; - /* read these before writing errorclear */ - sbuf[0] = ipath_read_kreg64( - dd, dd->ipath_kregs->kr_sendbuffererror); - sbuf[1] = ipath_read_kreg64( - dd, dd->ipath_kregs->kr_sendbuffererror + 1); - if (piobcnt > 128) { - sbuf[2] = ipath_read_kreg64( - dd, dd->ipath_kregs->kr_sendbuffererror + 2); - sbuf[3] = ipath_read_kreg64( - dd, dd->ipath_kregs->kr_sendbuffererror + 3); - } - if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) { - int i; - - ipath_cdbg(PKT, "SendbufErrs %lx %lx ", sbuf[0], sbuf[1]); - if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128) - printk("%lx %lx ", sbuf[2], sbuf[3]); - for (i = 0; i < piobcnt; i++) { - if (test_bit(i, sbuf)) { - u32 __iomem *piobuf; - if (i < dd->ipath_piobcnt2k) - piobuf = (u32 __iomem *) - (dd->ipath_pio2kbase + - i * dd->ipath_palign); - else - piobuf = (u32 __iomem *) - (dd->ipath_pio4kbase + - (i - dd->ipath_piobcnt2k) * - dd->ipath_4kalign); - - ipath_cdbg(PKT, - "PIObuf[%u] @%p pbc is %x; ", - i, piobuf, readl(piobuf)); - - ipath_disarm_piobufs(dd, i, 1); - } - } - if (ipath_debug & __IPATH_PKTDBG) - printk("\n"); - } + ipath_disarm_senderrbufs(dd); if ((errs & E_SUM_LINK_PKTERRS) && !(dd->ipath_flags & IPATH_LINKACTIVE)) { /* @@ -554,6 +554,14 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) ~(INFINIPATH_E_HARDWARE | INFINIPATH_E_IBSTATUSCHANGED); } + + /* likely due to cancel, so suppress */ + if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) && + dd->ipath_lastcancel > jiffies) { + ipath_dbg("Suppressed armlaunch/spktlen after error send cancel\n"); + errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN); + } + if (!errs) return 0; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 02134cb..d7540b7 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -427,6 +427,9 @@ struct ipath_devdata { unsigned long ipath_rcvctrl; /* shadow kr_sendctrl */ unsigned long ipath_sendctrl; + /* ports waiting for PIOavail intr */ + unsigned long ipath_portpiowait; + unsigned long ipath_lastcancel; /* to not count armlaunch after cancel */ /* value we put in kr_rcvhdrcnt */ u32 ipath_rcvhdrcnt; @@ -490,8 +493,6 @@ struct ipath_devdata { u32 ipath_htwidth; /* HT speed (200,400,800,1000) from HT config */ u32 ipath_htspeed; - /* ports waiting for PIOavail intr */ - unsigned long ipath_portpiowait; /* * number of sequential ibcstatus change for polling active/quiet * (i.e., link not coming up). @@ -585,6 +586,7 @@ int ipath_enable_wc(struct ipath_devdata *dd); void ipath_disable_wc(struct ipath_devdata *dd); int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp); void ipath_shutdown_device(struct ipath_devdata *); +void ipath_disarm_senderrbufs(struct ipath_devdata *); struct file_operations; int ipath_cdev_init(int minor, char *name, struct file_operations *fops, |