Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Conflicts:
	arch/arm/mach-at91/include/mach/system.h
	arch/arm/mach-imx/mach-cpuimx27.c

AT91 conflict resolution:
Acked-by: Anders Larsen <al@alarsen.net>
IMX conflict resolution confirmed by Uwe Kleine-König.

244 files changed, 5277 insertions, 2950 deletions

diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2df7186..d9271e7 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,82 +1,35 @@
 Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
 ===============================================================
 
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
-- Building and Installation
 - Command Line Parameters
 - Speed and Duplex Configuration
 - Additional Configurations
-- Known Issues
 - Support
 
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters.  This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release.  Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
 Identifying Your Adapter
 ========================
 
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/adapter/pro100/21397.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 For the latest Intel network drivers for Linux, refer to the following
 website.  In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
-    http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+    http://support.intel.com/support/go/network/adapter/home.htm
 
 Command Line Parameters
 =======================
 
-If the driver is built as a module, the  following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
-     modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
-     modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
@@ -89,10 +42,6 @@ NOTES:  For more information about the AutoNeg, Duplex, and Speed
         parameters, see the application note at:
         http://www.intel.com/design/network/applnots/ap450.htm
 
-        A descriptor describes a data buffer and attributes related to
-        the data buffer.  This information is accessed by the hardware.
-
-
 AutoNeg
 -------
 (Supported only on adapters with copper connections)
@@ -106,7 +55,6 @@ Duplex parameters must not be specified.
 NOTE:  Refer to the Speed and Duplex section of this readme for more
        information on the AutoNeg parameter.
 
-
 Duplex
 ------
 (Supported only on adapters with copper connections)
@@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex.  If the
 link partner is forced (either full or half), Duplex defaults to half-
 duplex.
 
-
 FlowControl
 -----------
 Valid Range:   0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
 This parameter controls the automatic generation(Tx) and response(Rx)
 to Ethernet PAUSE frames.
 
-
 InterruptThrottleRate
 ---------------------
 (not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range:   0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
 Default Value: 3
 
 The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the 
-adapter that is based on the maximum amount of interrupts that the adapter 
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
 will generate per second.
 
 Setting InterruptThrottleRate to a value greater or equal to 100
@@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
 load on the system and can lower CPU utilization under heavy load,
 but will increase latency as packets are not processed as quickly.
 
-The default behaviour of the driver previously assumed a static 
-InterruptThrottleRate value of 8000, providing a good fallback value for 
-all traffic types,but lacking in small packet performance and latency. 
-The hardware can handle many more small packets per second however, and 
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
 for this reason an adaptive interrupt moderation algorithm was implemented.
 
 Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic 
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
 that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value 
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
 for that traffic.
 
 The algorithm classifies the incoming traffic every interval into
-classes.  Once the class is determined, the InterruptThrottleRate value is 
-adjusted to suit that traffic type the best. There are three classes defined: 
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
 for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or 
+packets; and "Lowest latency", for almost completely small packets or
 minimal traffic.
 
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low 
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased 
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
 stepwise to 20000. This default mode is suitable for most applications.
 
 For situations where low latency is vital such as cluster or
 grid computing, the algorithm can reduce latency even more when
 InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to 
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
 Setting InterruptThrottleRate to 0 turns off any interrupt moderation
 and may improve small packet latency, but is generally not suitable
 for bulk throughput traffic.
@@ -212,8 +165,6 @@ NOTE:  When e1000 is loaded with default settings and multiple adapters
        be platform-specific.  If CPU utilization is not a concern, use
        RX_POLLING (NAPI) and default driver settings.
 
-
-
 RxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -225,15 +176,14 @@ by the driver.  Increasing this value allows the driver to buffer more
 incoming packets, at the expense of increased system memory utilization.
 
 Each descriptor is 16 bytes.  A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending 
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
 on the MTU setting. The maximum MTU size is 16110.
 
-NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo 
-       Frames.  Depending on the available system resources, the request 
-       for a higher number of receive descriptors may be denied.  In this 
+NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo
+       Frames.  Depending on the available system resources, the request
+       for a higher number of receive descriptors may be denied.  In this
        case, use a lower number.
 
-
 RxIntDelay
 ----------
 Valid Range:   0-65535 (0=off)
@@ -254,7 +204,6 @@ CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
           restoring the network connection.  To eliminate the potential
           for the hang ensure that RxIntDelay is set to 0.
 
-
 RxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -268,7 +217,6 @@ packet is received within the set amount of time.  Proper tuning,
 along with RxIntDelay, may improve traffic throughput in specific network
 conditions.
 
-
 Speed
 -----
 (This parameter is supported only on adapters with copper connections.)
@@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
 partner is set to auto-negotiate, the board will auto-detect the correct
 speed.  Duplex should also be set when Speed is set to either 10 or 100.
 
-
 TxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -295,6 +242,36 @@ NOTE:  Depending on the available system resources, the request for a
        higher number of transmit descriptors may be denied.  In this case,
        use a lower number.
 
+TxDescriptorStep
+----------------
+Valid Range:    1 (use every Tx Descriptor)
+		4 (use every 4th Tx Descriptor)
+
+Default Value:  1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+       TxDescriptors available for transmits to 1/4 of the normal allocation.
+       This has a possible negative performance impact, which may be
+       compensated for by allocating more descriptors using the TxDescriptors
+       module parameter.
+
+       There are other conditions which may result in "TX Timeout", which will
+       not be resolved by the use of the TxDescriptorStep parameter. As the
+       issue addressed by this parameter has never been observed on Intel
+       Architecture platforms, it should not be used on Intel platforms.
 
 TxIntDelay
 ----------
@@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic.  If the
 system is reporting dropped transmits, this value may be set too high
 causing the driver to run out of available transmit descriptors.
 
-
 TxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -330,6 +306,35 @@ Default Value: 1
 A value of '1' indicates that the driver should enable IP checksum
 offload for received packets (both UDP and TCP) to the adapter hardware.
 
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
 
 Speed and Duplex Configuration
 ==============================
@@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
 parameter should not be used.  Instead, use the Speed and Duplex parameters
 previously mentioned to force the adapter to the same speed and duplex.
 
-
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
-  Configuring a network driver to load properly when the system is started
-  is distribution dependent.  Typically, the configuration process involves
-  adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
-  as editing other system startup scripts and/or configuration files.  Many
-  popular Linux distributions ship with tools to make these changes for you.
-  To learn the proper way to configure a network device for your system,
-  refer to your distribution documentation.  If during this process you are
-  asked for the driver or module name, the name for the Linux Base Driver
-  for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
-  As an example, if you install the e1000 driver for two PRO/1000 adapters
-  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
-  the following to modules.conf or or modprobe.conf:
-
-       alias eth0 e1000
-       alias eth1 e1000
-       options e1000 Speed=10,100 Duplex=2,1
-
-  Viewing Link Messages
-  ---------------------
-  Link messages will not be displayed to the console if the distribution is
-  restricting system messages.  In order to see network driver link messages
-  on your console, set dmesg to eight by entering the following:
-
-       dmesg -n 8
-
-  NOTE: This setting is not saved across reboots.
-
   Jumbo Frames
   ------------
   Jumbo Frames support is enabled by changing the MTU to a value larger than
@@ -437,9 +411,11 @@ Additional Configurations
    setting in a different location.
 
   Notes:
-
-  - To enable Jumbo Frames, increase the MTU size on the interface beyond
-    1500.
+  Degradation in throughput performance may be observed in some Jumbo frames
+  environments. If this is observed, increasing the application's socket buffer
+  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+  See the specific application manual and /usr/src/linux*/Documentation/
+  networking/ip-sysctl.txt for more details.
 
   - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
     with the maximum Jumbo Frames size of 16128.
@@ -447,40 +423,11 @@ Additional Configurations
   - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
     loss of link.
 
-  - Some Intel gigabit adapters that support Jumbo Frames have a frame size
-    limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
-    The adapters with this limitation are based on the Intel(R) 82571EB,
-    82572EI, 82573L and 80003ES2LAN controller.  These correspond to the
-    following product names:
-     Intel(R) PRO/1000 PT Server Adapter
-     Intel(R) PRO/1000 PT Desktop Adapter
-     Intel(R) PRO/1000 PT Network Connection
-     Intel(R) PRO/1000 PT Dual Port Server Adapter
-     Intel(R) PRO/1000 PT Dual Port Network Connection
-     Intel(R) PRO/1000 PF Server Adapter
-     Intel(R) PRO/1000 PF Network Connection
-     Intel(R) PRO/1000 PF Dual Port Server Adapter
-     Intel(R) PRO/1000 PB Server Connection
-     Intel(R) PRO/1000 PL Network Connection
-     Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
-     Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
-     Intel(R) PRO/1000 PT Quad Port Server Adapter
-
   - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
     support Jumbo Frames. These correspond to the following product names:
      Intel(R) PRO/1000 Gigabit Server Adapter
      Intel(R) PRO/1000 PM Network Connection
 
-  - The following adapters do not support Jumbo Frames:
-     Intel(R) 82562V 10/100 Network Connection
-     Intel(R) 82566DM Gigabit Network Connection
-     Intel(R) 82566DC Gigabit Network Connection
-     Intel(R) 82566MM Gigabit Network Connection
-     Intel(R) 82566MC Gigabit Network Connection
-     Intel(R) 82562GT 10/100 Network Connection
-     Intel(R) 82562G 10/100 Network Connection
-
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
@@ -490,142 +437,14 @@ Additional Configurations
   The latest release of ethtool can be found from
   http://sourceforge.net/projects/gkernel.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options.  Support
-  for a more complete ethtool feature set can be enabled by upgrading
-  ethtool to ethtool-1.8.1.
-
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.  Ethtool is included with
-  all versions of Red Hat after Red Hat 7.2.  For other Linux distributions,
-  download and install Ethtool from the following website:
-  http://sourceforge.net/projects/gkernel.
-
-  For instructions on enabling WoL with Ethtool, refer to the website listed
-  above.
+  WoL is configured through the Ethtool* utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
   loaded when shutting down or rebooting the system.
 
-  Wake On LAN is only supported on port A for the following devices:
-  Intel(R) PRO/1000 PT Dual Port Network Connection
-  Intel(R) PRO/1000 PT Dual Port Server Connection
-  Intel(R) PRO/1000 PT Dual Port Server Adapter
-  Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter
-
-  NAPI
-  ----
-  NAPI (Rx polling mode) is enabled in the e1000 driver.
-
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets.  There are no
-workarounds for this problem in this network configuration.  The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames.  If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments.  If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help.  See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch.  This is a 3rd party limitation.  If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames 
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if 
-the available memory is heavily fragmented. This issue may be seen with PCI-X 
-adapters or with packet split disabled. This can be reduced or eliminated 
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes. 
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected.  All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
-    echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots.  The configuration
-change can be made permanent by adding the line:
-    net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
-      or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish.  In particular, these switches are known to
-be incompatible with 82541/82547:
-
-    Planex FXG-08TE
-    I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting.  Forcing master or forcing slave
-mode will improve time-to-link.
-
-    # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
-    0 = Hardware default
-    1 = Master mode
-    2 = Slave mode
-    3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
-   ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
 Support
 =======
 
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
new file mode 100644
index 0000000..6aa048b
--- /dev/null
+++ b/Documentation/networking/e1000e.txt
@@ -0,0 +1,302 @@
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+  the e1000 driver, not the e1000e driver due to the 82546 part being used
+  behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES:  For more information about the InterruptThrottleRate,
+        RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+        parameters, see the application note at:
+        http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE:  InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+       RxAbsIntDelay parameters.  In other words, minimizing the receive
+       and/or transmit absolute delays does not force the controller to
+       generate more interrupts than what the Interrupt Throttle Rate
+       allows.
+
+NOTE:  When e1000e is loaded with default settings and multiple adapters
+       are in use simultaneously, the CPU utilization may increase non-
+       linearly.  In order to limit the CPU utilization without impacting
+       the overall throughput, we recommend that you load the driver as
+       follows:
+
+           modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+       This sets the InterruptThrottleRate to 3000 interrupts/sec for
+       the first, second, and third instances of the driver.  The range
+       of 2000 to 3000 interrupts per second works on a majority of
+       systems and is a good starting point, but the optimal value will
+       be platform-specific.  If CPU utilization is not a concern, use
+       RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds.  Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic.  Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic.  If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
+          hang (stop transmitting) under certain network conditions.  If
+          this occurs a NETDEV WATCHDOG message is logged in the system
+          event log.  In addition, the controller is automatically reset,
+          restoring the network connection.  To eliminate the potential
+          for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated.  Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time.  Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds.  Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic.  If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated.  Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time.  Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible.  The
+interrupt order is MSI-X, MSI, Legacy.  If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack.  If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory).  This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+    poor performance or loss of link.
+
+  - Some adapters limit Jumbo Frames sized packets to a maximum of
+    4096 bytes and some adapters do not support Jumbo Frames.
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  We
+  strongly recommend downloading the latest version of Ethtool at:
+
+  http://sourceforge.net/projects/gkernel.
+
+  Speed and Duplex
+  ----------------
+  Speed and Duplex are configured through the Ethtool* utility. For
+  instructions,  refer to the Ethtool man page.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility. For instructions on
+  enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the e1000e driver must be
+  loaded when shutting down or rebooting the system.
+
+  In most cases Wake On LAN is only supported on port A for multiple port
+  adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
index 19015de..21dd5d1 100755..100644
--- a/Documentation/networking/ixgbevf.txt
+++ b/Documentation/networking/ixgbevf.txt
@@ -1,19 +1,16 @@
 Linux* Base Driver for Intel(R) Network Connection
 ==================================================
 
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
 - Known Issues/Troubleshooting
 - Support
 
-In This Release
-===============
-
 This file describes the ixgbevf Linux* Base Driver for Intel Network
 Connection.
 
@@ -33,7 +30,7 @@ Identifying Your Adapter
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/sb/CS-008441.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 Known Issues/Troubleshooting
 ============================
@@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at:
 If an issue is identified with the released source code on the supported
 kernel with a supported adapter, email the specific information related
 to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index ccd951f..cc96ee2 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void)
 	}
 
 	if (opt_unpoison && !hwpoison_forget_fd) {
-		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
 		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
 	}
 }
diff --git a/MAINTAINERS b/MAINTAINERS
index e54f922..8395f2ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -969,6 +969,16 @@ L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
 
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	arch/arm/plat-s5p/dev-fimc*
+F:	arch/arm/plat-samsung/include/plat/*fimc*
+F:	drivers/media/video/s5p-fimc/
+
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>
@@ -2547,7 +2557,7 @@ S:	Supported
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
@@ -3075,16 +3085,27 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
-M:	Alex Duyck <alexander.h.duyck@intel.com>
+M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
+M:	Don Skidmore <donald.c.skidmore@intel.com>
+M:	Greg Rose <gregory.v.rose@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
+F:	Documentation/networking/e100.txt
+F:	Documentation/networking/e1000.txt
+F:	Documentation/networking/e1000e.txt
+F:	Documentation/networking/igb.txt
+F:	Documentation/networking/igbvf.txt
+F:	Documentation/networking/ixgb.txt
+F:	Documentation/networking/ixgbe.txt
+F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
@@ -3092,6 +3113,7 @@ F:	drivers/net/igb/
 F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
+F:	drivers/net/ixgbevf/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@vger.kernel.org
@@ -5020,6 +5042,12 @@ F:	drivers/media/common/saa7146*
 F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
+SAMSUNG AUDIO (ASoC) DRIVERS
+M:	Jassi Brar <jassi.brar@samsung.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+F:	sound/soc/s3c24xx
+
 TLG2300 VIDEO4LINUX-2 DRIVER
 M:	Huang Shijie <shijie8@gmail.com>
 M:	Kang Yong <kangyong@telegent.com>
@@ -6462,8 +6490,10 @@ F:	include/linux/wm97xx.h
 WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
+M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W:	http://opensource.wolfsonmicro.com/node/8
+W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
diff --git a/Makefile b/Makefile
index 77b5c6e..7583116 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc7
-NAME = Sheep on Meth
+EXTRAVERSION = -rc8
+NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7949fe6..b27f8ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -680,8 +680,8 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
-config ARCH_S5P6440
-	bool "Samsung S5P6440"
+config ARCH_S5P64X0
+	bool "Samsung S5P6440 S5P6450"
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
@@ -690,7 +690,8 @@ config ARCH_S5P6440
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
 	help
-	  Samsung S5P6440 CPU based systems
+	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+	  SMDK6450.
 
 config ARCH_S5P6442
 	bool "Samsung S5P6442"
@@ -941,7 +942,7 @@ if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
@@ -1114,6 +1115,20 @@ config ARM_ERRATA_720789
 	  invalidated are not, resulting in an incoherency in the system page
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 743622 Cortex-A9
+	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  optimisation in the Cortex-A9 Store Buffer may lead to data
+	  corruption. This workaround sets a specific bit in the diagnostic
+	  register of the Cortex-A9 which disables the Store Buffer
+	  optimisation, preventing the defect from occurring. This has no
+	  visible impact on the overall performance or power consumption of the
+	  processor.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1270,7 +1285,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
 		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5022559..b87aed0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig
index 0b0266c..2993ecd 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p64x0_defconfig
@@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6440=y
+CONFIG_ARCH_S5P64X0=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
 CONFIG_MACH_SMDK6440=y
+CONFIG_MACH_SMDK6450=y
 CONFIG_CPU_32v6K=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8bccbfa..2c1f005 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	/*
 	 * MSR   : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
-	 * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+	 * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
 	 * ALU op with S bit and Rd == 15 :
 	 *	   cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
-	if ((insn & 0x0f900000) == 0x03200000 ||	/* MSR & Undef */
+	if ((insn & 0x0fb00000) == 0x03200000 ||	/* MSR */
+	    (insn & 0x0ff00000) == 0x03400000 ||	/* Undef */
 	    (insn & 0x0e10f000) == 0x0210f000)		/* ALU s-bit, R15  */
 		return INSN_REJECTED;
 
@@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * *S (bit 20) updates condition codes
 	 * ADC/SBC/RSC reads the C flag
 	 */
-	insn &= 0xfff00fff;	/* Rn = r0, Rd = r0 */
+	insn &= 0xffff0fff;	/* Rd = r0 */
 	asi->insn[0] = insn;
 	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 			emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index bfbb612..36af14b 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -28,7 +28,6 @@
 
 static inline void arch_idle(void)
 {
-#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
@@ -38,11 +37,11 @@ static inline void arch_idle(void)
 #else
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
 #endif
-#else
+#ifndef CONFIG_CPU_ARM920T
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
+	 * Post-RM9200 processors need this in conjunction with the above
+	 * to save power when idle.
 	 */
 	cpu_do_idle();
 #endif
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index 8904ca4..a696d35 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch)
 	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
 	m2p_set_control(ch, v);
 
-	while (m2p_channel_state(ch) == STATE_ON)
+	while (m2p_channel_state(ch) >= STATE_ON)
 		cpu_relax();
 
 	m2p_set_control(ch, 0x0);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9b45f1f..197f9e2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -122,6 +122,7 @@ config MACH_CPUIMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 28f73a1..a1681fc 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -258,7 +258,7 @@ static void __init eukrea_cpuimx27_init(void)
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	imx27_add_imx_i2c(1, &cpuimx27_i2c1_data);
+	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
deleted file mode 100644
index 6a4af7f..0000000
--- a/arch/arm/mach-s5p6440/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-# arch/arm/mach-s5p6440/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P6440
-
-config CPU_S5P6440
-	bool
-	select S3C_PL330_DMA
-	help
-	  Enable S5P6440 CPU support
-
-config S5P6440_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config MACH_SMDK6440
-	bool "SMDK6440"
-	select CPU_S5P6440
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	select S5P6440_SETUP_I2C1
-	help
-	  Machine support for the Samsung SMDK6440
-
-endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
deleted file mode 100644
index c3fe4d3..0000000
--- a/arch/arm/mach-s5p6440/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/mach-s5p6440/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S5P6440 system
-
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
-obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S5P6440_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
deleted file mode 100644
index ca6e48d..0000000
--- a/arch/arm/mach-s5p6440/clock.c
+++ /dev/null
@@ -1,846 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/clock.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-#include <plat/pll.h>
-#include <plat/s5p6440.h>
-
-/* APLL Mux output clock */
-static struct clksrc_clk clk_mout_apll = {
-	.clk    = {
-		.name           = "mout_apll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_apll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static int s5p6440_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-static unsigned long s5p6440_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static u32 epll_div[][5] = {
-	{ 36000000,	0,	48, 1, 4 },
-	{ 48000000,	0,	32, 1, 3 },
-	{ 60000000,	0,	40, 1, 3 },
-	{ 72000000,	0,	48, 1, 3 },
-	{ 84000000,	0,	28, 1, 2 },
-	{ 96000000,	0,	32, 1, 2 },
-	{ 32768000,	45264,	43, 1, 4 },
-	{ 45158000,	6903,	30, 1, 3 },
-	{ 49152000,	50332,	32, 1, 3 },
-	{ 67738000,	10398,	45, 1, 3 },
-	{ 73728000,	9961,	49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
-
-	epll_con_k &= ~(PLL90XX_KDIV_MASK);
-	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		 if (epll_div[i][0] == rate) {
-			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
-			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
-				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
-				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
-	.get_rate = s5p6440_epll_get_rate,
-	.set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk    = {
-		.name           = "mout_epll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_epll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name           = "mout_mpll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_mpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-enum perf_level {
-	L0 = 532*1000,
-	L1 = 266*1000,
-	L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
-	/*{ARM_CLK, DIVarm, DIVhclk}*/
-	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 iter;
-
-	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (rate > clock_table[iter][0])
-			return clock_table[iter-1][0];
-	}
-
-	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 round_tmp;
-	u32 iter;
-	u32 clk_div0_tmp;
-	u32 cur_rate = clk->ops->get_rate(clk);
-	unsigned long flags;
-
-	round_tmp = clk->ops->round_rate(clk, rate);
-	if (round_tmp == cur_rate)
-		return 0;
-
-
-	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (round_tmp == clock_table[iter][0])
-			break;
-	}
-
-	if (iter >= ARRAY_SIZE(clock_table))
-		iter = ARRAY_SIZE(clock_table) - 1;
-
-	local_irq_save(flags);
-	if (cur_rate > round_tmp) {
-		/* Frequency Down */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
-	} else {
-		/* Frequency Up */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-		}
-	local_irq_restore(flags);
-
-	clk->rate = clock_table[iter][0];
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_clkarm_ops = {
-	.get_rate	= s5p6440_armclk_get_rate,
-	.set_rate	= s5p6440_armclk_set_rate,
-	.round_rate	= s5p6440_armclk_round_rate,
-};
-
-static struct clksrc_clk clk_armclk = {
-	.clk	= {
-		.name	= "armclk",
-		.id	= 1,
-		.parent	= &clk_mout_apll.clk,
-		.ops	= &s5p6440_clkarm_ops,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mpll = {
-	.clk	= {
-		.name	= "dout_mpll",
-		.id	= -1,
-		.parent	= &clk_mout_mpll.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_hclk = {
-	.clk	= {
-		.name	= "clk_hclk",
-		.id	= -1,
-		.parent	= &clk_armclk.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
-	.clk	= {
-		.name	= "clk_pclk",
-		.id	= -1,
-		.parent	= &clk_hclk.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
-};
-
-static struct clk *clkset_hclklow_list[] = {
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_hclklow = {
-	.sources	= clkset_hclklow_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclklow_list),
-};
-
-static struct clksrc_clk clk_hclk_low = {
-	.clk = {
-		.name	= "hclk_low",
-		.id	= -1,
-	},
-	.sources	= &clkset_hclklow,
-	.reg_src	= { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
-	.reg_div	= { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
-	.clk	= {
-		.name	= "pclk_low",
-		.id	= -1,
-		.parent	= &clk_hclk_low.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5P_OTHERS);
-	if (enable)
-		val |= S5P_OTHERS_USB_SIG_MASK;
-	else
-		val &= ~S5P_OTHERS_USB_SIG_MASK;
-
-	__raw_writel(val, S5P_OTHERS);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
-}
-
-static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
-}
-
-static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
-}
-
-static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
-}
-
-static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
-}
-
-static int s5p6440_mem_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_mem_ctrl,
-		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
-	}, {
-		.name		= "i2s_v40",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
-	}, {
-		.name    	= "otg",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
-	}, {
-		.name    	= "post",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "hclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "tsi",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "pclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 31),
-	}, {
-		.name		= "dmc0",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 30),
-	}, {
-		.name		= "etm",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 29),
-	}, {
-		.name		= "dsim",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "gps",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "pcm",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "irom",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "dma",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "2d",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "mem",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 1),
-	},
-};
-
-static struct clk clk_iis_cd_v40 = {
-	.name		= "iis_cdclk_v40",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_group1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
-	.sources	= clkset_group1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
-	.sources	= clkset_audio_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 2,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.id		= -1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_post",
-			.id		= -1,
-			.ctrlbit	= (1 << 10),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dispcon",
-			.id		= -1,
-			.ctrlbit	= (1 << 1),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimgvg",
-			.id		= -1,
-			.ctrlbit	= (1 << 2),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio2",
-			.id		= -1,
-			.ctrlbit	= (1 << 11),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_audio,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
-	},
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_dout_mpll,
-	&clk_armclk,
-	&clk_hclk,
-	&clk_pclk,
-	&clk_hclk_low,
-	&clk_pclk_low,
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk_low;
-	unsigned long pclk;
-	unsigned long pclk_low;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-
-	/* Set S5P6440 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p6440_epll_enable;
-	clk_fout_epll.ops = &s5p6440_epll_ops;
-
-	clk_48m.enable = s5p6440_clk48m_ctrl;
-
-	xtal_clk = clk_get(NULL, "ext_xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
-				__raw_readl(S5P_EPLL_CON_K));
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
-			" E=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
-	fclk = clk_get_rate(&clk_armclk.clk);
-	hclk = clk_get_rate(&clk_hclk.clk);
-	pclk = clk_get_rate(&clk_pclk.clk);
-	hclk_low = clk_get_rate(&clk_hclk_low.clk);
-	pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
-	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
-			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
-			print_mhz(hclk), print_mhz(hclk_low),
-			print_mhz(pclk), print_mhz(pclk_low));
-
-	clk_f.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register %u clocks\n", ret);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
deleted file mode 100644
index 526f33a..0000000
--- a/arch/arm/mach-s5p6440/cpu.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/cpu.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-#include <plat/adc-core.h>
-
-static void s5p6440_idle(void)
-{
-	unsigned long val;
-
-	if (!need_resched()) {
-		val = __raw_readl(S5P_PWR_CFG);
-		val &= ~(0x3<<5);
-		val |= (0x1<<5);
-		__raw_writel(val, S5P_PWR_CFG);
-
-		cpu_do_idle();
-	}
-	local_irq_enable();
-}
-
-/* s5p6440_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s5p6440_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-}
-
-void __init s5p6440_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6440_register_clocks();
-	s5p6440_setup_clocks();
-}
-
-void __init s5p6440_init_irq(void)
-{
-	/* S5P6440 supports only 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
-	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
-	 */
-	vic[0] = 0xff800ae7;
-	vic[1] = 0xffbf23e5;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6440_sysclass = {
-	.name	= "s5p6440-core",
-};
-
-static struct sys_device s5p6440_sysdev = {
-	.cls	= &s5p6440_sysclass,
-};
-
-static int __init s5p6440_core_init(void)
-{
-	return sysdev_class_register(&s5p6440_sysclass);
-}
-
-core_initcall(s5p6440_core_init);
-
-int __init s5p6440_init(void)
-{
-	printk(KERN_INFO "S5P6440: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p6440_idle;
-
-	return sysdev_register(&s5p6440_sysdev);
-}
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
deleted file mode 100644
index 3ca0d2b..0000000
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
-};
-
-static struct resource s5p6440_iis0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_I2S,
-		.end   = S5P6440_PA_I2S + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_iis = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
-	.resource	  = s5p6440_iis0_resource,
-	.dev = {
-		.platform_data = &s3c_i2s_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_PCM,
-		.end   = S5P6440_PA_PCM + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_pcm = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_pcm0_resource),
-	.resource	  = s5p6440_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
deleted file mode 100644
index 510af44..0000000
--- a/arch/arm/mach-s5p6440/dev-spi.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6440_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6440_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
-		break;
-
-	case 1:
-		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6440_spi0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI0,
-		.end   = S5P6440_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6440_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi0_resource),
-	.resource	  = s5p6440_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi0_pdata,
-	},
-};
-
-static struct resource s5p6440_spi1_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI1,
-		.end   = S5P6440_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 15,
-};
-
-struct platform_device s5p6440_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi1_resource),
-	.resource	  = s5p6440_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi1_pdata,
-	},
-};
-
-void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6440_spi0_pdata;
-		break;
-	case 1:
-		pd = &s5p6440_spi1_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
deleted file mode 100644
index 1347d7f..0000000
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
deleted file mode 100644
index 2178383..0000000
--- a/arch/arm/mach-s5p6440/include/mach/gpio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6440_GPIO_A_NR	(6)
-#define S5P6440_GPIO_B_NR	(7)
-#define S5P6440_GPIO_C_NR	(8)
-#define S5P6440_GPIO_F_NR	(2)
-#define S5P6440_GPIO_G_NR	(7)
-#define S5P6440_GPIO_H_NR	(10)
-#define S5P6440_GPIO_I_NR	(16)
-#define S5P6440_GPIO_J_NR	(12)
-#define S5P6440_GPIO_N_NR	(16)
-#define S5P6440_GPIO_P_NR	(8)
-#define S5P6440_GPIO_R_NR	(15)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-#define S5P6440_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5P6440_GPIO_A_START = 0,
-	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
-	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
-	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
-	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
-	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
-	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
-	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
-	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
-	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
-	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-/* S5P6440 GPIO number definitions. */
-#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
-
-/* the end of the S5P6440 specific gpios */
-#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S3C_GPIO_END		S5P6440_GPIO_END
-
-/* define the number of gpios we need to the one after the GPR() range */
-#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
deleted file mode 100644
index fa2d69c..0000000
--- a/arch/arm/mach-s5p6440/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5p6440/include/mach/io.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S3C64XX based
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
deleted file mode 100644
index 6cc5cbc..0000000
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/map.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6440_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
-
-#define S5P6440_PA_SYSCON	(0xE0100000)
-#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
-
-#define S5P6440_PA_GPIO		(0xE0308000)
-#define S5P_PA_GPIO		S5P6440_PA_GPIO
-
-#define S5P6440_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6440_PA_VIC0
-
-#define S5P6440_PA_PDMA		0xE9000000
-
-#define S5P6440_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6440_PA_VIC1
-
-#define S5P6440_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6440_PA_TIMER
-
-#define S5P6440_PA_RTC		(0xEA100000)
-
-#define S5P6440_PA_WDT		(0xEA200000)
-#define S5P_PA_WDT		S5P6440_PA_WDT
-
-#define S5P6440_PA_UART		(0xEC000000)
-
-#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
-
-#define S5P_SZ_UART		SZ_256
-
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P6440_PA_IIC1		(0xEC20F000)
-
-#define S5P6440_PA_SPI0		0xEC400000
-#define S5P6440_PA_SPI1		0xEC500000
-
-#define S5P6440_PA_HSOTG	(0xED100000)
-
-#define S5P6440_PA_HSMMC0	(0xED800000)
-#define S5P6440_PA_HSMMC1	(0xED900000)
-#define S5P6440_PA_HSMMC2	(0xEDA00000)
-
-#define S5P6440_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
-
-/* I2S */
-#define S5P6440_PA_I2S		0xF2000000
-
-/* PCM */
-#define S5P6440_PA_PCM		0xF2100000
-
-#define S5P6440_PA_ADC		(0xF3000000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5P6440_PA_UART
-#define S3C_PA_IIC		S5P6440_PA_IIC0
-#define S3C_PA_RTC		S5P6440_PA_RTC
-#define S3C_PA_IIC1		S5P6440_PA_IIC1
-#define S3C_PA_WDT		S5P6440_PA_WDT
-
-#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
deleted file mode 100644
index c783ecc..0000000
--- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_APLL_CON		S5P_CLKREG(0x0C)
-#define S5P_MPLL_CON		S5P_CLKREG(0x10)
-#define S5P_EPLL_CON		S5P_CLKREG(0x14)
-#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
-#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
-#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
-#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
-#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
-#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
-#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
-#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
-#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
-#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
-#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
-#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
-#define S5P_SWRESET		S5P_CLKREG(0x114)
-#define S5P_SYS_ID		S5P_CLKREG(0x118)
-#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
-#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
-#define S5P_PWR_CFG		S5P_CLKREG(0x804)
-#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
-#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
-#define S5P_STOP_CFG		S5P_CLKREG(0x814)
-#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
-#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
-#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
-#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
-#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
-#define S5P_OTHERS		S5P_CLKREG(0x900)
-#define S5P_RST_STAT		S5P_CLKREG(0x904)
-#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
-#define S5P_SLPEN		S5P_CLKREG(0x930)
-#define S5P_INFORM0		S5P_CLKREG(0xA00)
-#define S5P_INFORM1		S5P_CLKREG(0xA04)
-#define S5P_INFORM2		S5P_CLKREG(0xA08)
-#define S5P_INFORM3		S5P_CLKREG(0xA0C)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
-#define S5P_CLKDIV0_PCLK_SHIFT		(12)
-#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
-#define S5P_CLKDIV0_HCLK_SHIFT		(8)
-#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
-#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
-#define S5P_CLKDIV0_ARM_SHIFT		(0)
-
-/* CLKDIV3 */
-#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
-#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
-#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
-#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
-
-/* HCLK0 GATE Registers */
-#define S5P_CLKCON_HCLK0_USB		(1<<20)
-#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
-#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
-#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
-#define S5P_CLKCON_HCLK0_POST0		(1<<5)
-
-/* HCLK1 GATE Registers */
-#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
-
-/* PCLK GATE Registers */
-#define S5P_CLKCON_PCLK_IIS2		(1<<26)
-#define S5P_CLKCON_PCLK_SPI1		(1<<22)
-#define S5P_CLKCON_PCLK_SPI0		(1<<21)
-#define S5P_CLKCON_PCLK_GPIO		(1<<18)
-#define S5P_CLKCON_PCLK_IIC0		(1<<17)
-#define S5P_CLKCON_PCLK_TSADC		(1<<12)
-#define S5P_CLKCON_PCLK_PWM		(1<<7)
-#define S5P_CLKCON_PCLK_RTC		(1<<6)
-#define S5P_CLKCON_PCLK_WDT		(1<<5)
-#define S5P_CLKCON_PCLK_UART3		(1<<4)
-#define S5P_CLKCON_PCLK_UART2		(1<<3)
-#define S5P_CLKCON_PCLK_UART1		(1<<2)
-#define S5P_CLKCON_PCLK_UART0		(1<<1)
-
-/* SCLK0 GATE Registers */
-#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
-#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
-#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
-#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
-#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
-#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
-#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
-#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
-#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
-#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
-#define S5P_CLKCON_SCLK0_UART		(1<<5)
-
-/* SCLK1 GATE Registers */
-
-/* MEM0 GATE Registers */
-#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
-
-/*OTHERS Resgister */
-#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
-#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
-
-/* Compatibility defines */
-#define ARM_CLK_DIV			S5P_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT		0
-#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
deleted file mode 100644
index 5fbca50..0000000
--- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6440_PLAT_SPI_CLKS_H
-#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6440_SPI_SRCCLK_PCLK		0
-#define S5P6440_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5P6440_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
deleted file mode 100644
index 7c1f600..0000000
--- a/arch/arm/mach-s5p6440/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
deleted file mode 100644
index a1f3727..0000000
--- a/arch/arm/mach-s5p6440/init.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/init.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk_low",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p6440_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
index a48fb55..842af86 100644
--- a/arch/arm/mach-s5p6442/cpu.c
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5p6442/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,10 +48,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P6442_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
 		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
 	}
 };
 
@@ -62,10 +83,11 @@ static void s5p6442_idle(void)
 	local_irq_enable();
 }
 
-/* s5p6442_map_io
+/*
+ * s5p6442_map_io
  *
  * register the standard cpu IO areas
-*/
+ */
 
 void __init s5p6442_map_io(void)
 {
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 281d256..31fb2e6 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -23,16 +23,10 @@
 #define S5P_PA_SYSCON		S5P6442_PA_SYSCON
 
 #define S5P6442_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5P6442_PA_GPIO
 
 #define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6442_PA_VIC0
-
 #define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6442_PA_VIC1
-
 #define S5P6442_PA_VIC2		(0xE4200000)
-#define S5P_PA_VIC2		S5P6442_PA_VIC2
 
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
new file mode 100644
index 0000000..fbcae93
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -0,0 +1,57 @@
+# arch/arm/mach-s5p64x0/Kconfig
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P64X0
+
+config CPU_S5P6440
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6440 CPU support
+
+config CPU_S5P6450
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6450 CPU support
+
+config S5P64X0_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+# machine support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6440
+
+config MACH_SMDK6450
+	bool "SMDK6450"
+	select CPU_S5P6450
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6450
+
+endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
new file mode 100644
index 0000000..2655829
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/mach-s5p64x0/Makefile
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P64X0 system
+
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o
+obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o gpio.o
+obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
+
+# device support
+
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+
+obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
index ff90aa1..ff90aa1 100644
--- a/arch/arm/mach-s5p6440/Makefile.boot
+++ b/arch/arm/mach-s5p64x0/Makefile.boot
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
new file mode 100644
index 0000000..f93dcd8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -0,0 +1,626 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p64x0_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_mem_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "post",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 5)
+	}, {
+		.name		= "2d",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20)
+	}, {
+		.name		= "irom",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "pcm",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "gps",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "dsim",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "etm",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "pclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	},
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_group1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_post",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
new file mode 100644
index 0000000..f9afb05
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -0,0 +1,655 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6450 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6450.h>
+
+static struct clksrc_clk clk_mout_dpll = {
+	.clk	= {
+		.name		= "mout_dpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_dpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
+};
+
+static u32 epll_div[][5] = {
+	{ 133000000,	27307,	55, 2, 2 },
+	{ 100000000,	43691,	41, 2, 2 },
+	{ 480000000,	0,	80, 2, 0 },
+};
+
+static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6450_epll_ops = {
+	.get_rate = s5p64x0_epll_get_rate,
+	.set_rate = s5p6450_epll_set_rate,
+};
+
+static struct clksrc_clk clk_dout_epll = {
+	.clk	= {
+		.name		= "dout_epll",
+		.id		= -1,
+		.parent		= &clk_mout_epll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_mout_hclk_sel = {
+	.clk	= {
+		.name		= "mout_hclk_sel",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
+};
+
+static struct clk *clkset_hclk_list[] = {
+	&clk_mout_hclk_sel.clk,
+	&clk_armclk.clk,
+};
+
+static struct clksrc_sources clkset_hclk = {
+	.sources	= clkset_hclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_list),
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_dout_pwm_ratio0 = {
+	.clk	= {
+		.name		= "clk_dout_pwm_ratio0",
+		.id		= -1,
+		.parent		= &clk_mout_hclk_sel.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_to_wdt_pwm = {
+	.clk	= {
+		.name		= "clk_pclk_to_wdt_pwm",
+		.id		= -1,
+		.parent		= &clk_dout_pwm_ratio0.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "usbhost",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "usbotg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_to_wdt_pwm.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_mali_list[] = {
+	&clk_mout_epll.clk,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_mali = {
+	.sources	= clkset_mali_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mali_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clk *clkset_dispcon_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&clk_mout_dpll.clk,
+};
+
+static struct clksrc_sources clkset_dispcon = {
+	.sources	= clkset_dispcon_list,
+	.nr_sources	= ARRAY_SIZE(clkset_dispcon_list),
+};
+
+static struct clk *clkset_hsmmc44_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&s5p_clk_27m,
+	&clk_48m,
+};
+
+static struct clksrc_sources clkset_hsmmc44 = {
+	.sources	= clkset_hsmmc44_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hsmmc44_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_dout_epll.clk,
+	[1] = &clk_dout_mpll.clk,
+	[2] = &clk_ext_xtal_mux,
+	[3] = NULL,
+	[4] = NULL,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "audio-bus",
+		.id		= -1,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 8),
+		.parent		= &clk_dout_epll.clk,
+	},
+	.sources	= &clkset_sclk_audio0,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "aclk_mali",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_2d",
+			.id		= -1,
+			.ctrlbit	= (1 << 12),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_usi",
+			.id		= -1,
+			.ctrlbit	= (1 << 7),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_camif",
+			.id		= -1,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_dispcon,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_hsmmc44",
+			.id		= -1,
+			.ctrlbit	= (1 << 30),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_hsmmc44,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_dout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_mout_hclk_sel,
+	&clk_dout_pwm_ratio0,
+	&clk_pclk_to_wdt_pwm,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+	&clk_sclk_audio0,
+};
+
+void __init_or_cpufreq s5p6450_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long dpll;
+	unsigned int ptr;
+
+	/* Set S5P6450 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.ops = &s5p6450_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+	dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
+				__raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_dpll.rate = dpll;
+
+	printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz, D=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll),
+			print_mhz(dpll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+void __init s5p6450_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
new file mode 100644
index 0000000..523ba80
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -0,0 +1,253 @@
+/* linux/arch/arm/mach-s5p64x0/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+
+struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+	.clk	= {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+};
+
+int s5p64x0_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P64X0_EPLL_CON);
+
+	return 0;
+}
+
+unsigned long s5p64x0_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+	}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+struct clk_ops s5p64x0_clkarm_ops = {
+	.get_rate	= s5p64x0_armclk_get_rate,
+	.set_rate	= s5p64x0_armclk_set_rate,
+	.round_rate	= s5p64x0_armclk_round_rate,
+};
+
+struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= 1,
+		.parent		= &clk_mout_apll.clk,
+		.ops		= &s5p64x0_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name		= "dout_mpll",
+		.id		= -1,
+		.parent		= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+struct clk *clkset_hclk_low_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+struct clksrc_sources clkset_hclk_low = {
+	.sources	= clkset_hclk_low_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_low_list),
+};
+
+int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
+}
+
+int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
+}
+
+int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
+}
+
+int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
+}
+
+int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
+}
+
+int s5p64x0_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
+}
+
+int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P64X0_OTHERS);
+	if (enable)
+		val |= S5P64X0_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P64X0_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
new file mode 100644
index 0000000..b8d02eb
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -0,0 +1,209 @@
+/* linux/arch/arm/mach-s5p64x0/cpu.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/adc-core.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5p64x0_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P64X0_PWR_CFG);
+		val &= ~(0x3 << 5);
+		val |= (0x1 << 5);
+		__raw_writel(val, S5P64X0_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+void __init s5p6450_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6450_register_clocks();
+	s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+	/* S5P6450 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+	 * VIC1 is missing IRQ VIC1[12, 14, 23]
+	 */
+	vic[0] = 0xff9f1fff;
+	vic[1] = 0xff7fafff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p64x0_sysclass = {
+	.name	= "s5p64x0-core",
+};
+
+static struct sys_device s5p64x0_sysdev = {
+	.cls	= &s5p64x0_sysclass,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+	return sysdev_class_register(&s5p64x0_sysclass);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p64x0_idle;
+
+	return sysdev_register(&s5p64x0_sysdev);
+}
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
new file mode 100644
index 0000000..fa097bd
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -0,0 +1,164 @@
+/* linux/arch/arm/mach-s5p64x0/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct s3c_audio_pdata s5p6450_i2s_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+};
+
+static struct resource s5p64x0_iis0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_I2S,
+		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6440_i2s_pdata,
+	},
+};
+
+struct platform_device s5p6450_device_iis0 = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_PCM,
+		.end	= S5P64X0_PA_PCM + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		= "samsung-pcm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	= s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s5p6440_pcm_pdata,
+	},
+};
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
new file mode 100644
index 0000000..5b69ec4
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -0,0 +1,232 @@
+/* linux/arch/arm/mach-s5p64x0/dev-spi.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *s5p64x0_spi_src_clks[] = {
+	[S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p64x0_spi0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI0,
+		.end	= S5P64X0_PA_SPI0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI0_TX,
+		.end	= DMACH_SPI0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI0_RX,
+		.end	= DMACH_SPI0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI0,
+		.end	= IRQ_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p64x0_device_spi0 = {
+	.name		= "s3c64xx-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi0_resource),
+	.resource	= s5p64x0_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource s5p64x0_spi1_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI1,
+		.end	= S5P64X0_PA_SPI1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI1_TX,
+		.end	= DMACH_SPI1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI1_RX,
+		.end	= DMACH_SPI1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI1,
+		.end	= IRQ_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+struct platform_device s5p64x0_device_spi1 = {
+	.name		= "s3c64xx-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi1_resource),
+	.resource	= s5p64x0_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	unsigned int id;
+	struct s3c64xx_spi_info *pd;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		if (id == 0x50000)
+			pd = &s5p6450_spi0_pdata;
+		else
+			pd = &s5p6440_spi0_pdata;
+
+		s5p64x0_device_spi0.dev.platform_data = pd;
+		break;
+	case 1:
+		if (id == 0x50000)
+			pd = &s5p6450_spi1_pdata;
+		else
+			pd = &s5p6440_spi1_pdata;
+
+		s5p64x0_device_spi1.dev.platform_data = pd;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 07606ad..29a8c24 100644
--- a/arch/arm/mach-s5p6440/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -15,26 +19,25 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+*/
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
 #include <mach/map.h>
 #include <mach/irqs.h>
+#include <mach/regs-clock.h>
 
+#include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p6440_pdma_resource[] = {
+static struct resource s5p64x0_pdma_resource[] = {
 	[0] = {
-		.start  = S5P6440_PA_PDMA,
-		.end    = S5P6440_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
+		.start	= S5P64X0_PA_PDMA,
+		.end	= S5P64X0_PA_PDMA + SZ_4K,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_DMA0,
@@ -80,26 +83,67 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
 	},
 };
 
-static struct platform_device s5p6440_device_pdma = {
+static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_UART4_RX,
+		[9] = DMACH_UART4_TX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_PCM1_TX,
+		[17] = DMACH_PCM1_RX,
+		[18] = DMACH_PCM2_TX,
+		[19] = DMACH_PCM2_RX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_USI_TX,
+		[23] = DMACH_USI_RX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_I2S1_TX,
+		[26] = DMACH_I2S1_RX,
+		[27] = DMACH_I2S2_TX,
+		[28] = DMACH_I2S2_RX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_UART5_RX,
+		[31] = DMACH_UART5_TX,
+	},
+};
+
+static struct platform_device s5p64x0_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
-	.resource	= s5p6440_pdma_resource,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
+	.resource	= s5p64x0_pdma_resource,
 	.dev		= {
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_pdma_pdata,
 	},
 };
 
-static struct platform_device *s5p6440_dmacs[] __initdata = {
-	&s5p6440_device_pdma,
-};
-
-static int __init s5p6440_dma_init(void)
+static int __init s5p64x0_dma_init(void)
 {
-	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+	unsigned int id;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	if (id == 0x50000)
+		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+	else
+		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+
+	platform_device_register(&s5p64x0_device_pdma);
 
 	return 0;
 }
-arch_initcall(s5p6440_dma_init);
+arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p64x0/gpio.c
index 8bf6e0c..39159dd 100644
--- a/arch/arm/mach-s5p6440/gpio.c
+++ b/arch/arm/mach-s5p64x0/gpio.c
@@ -1,14 +1,14 @@
-/* arch/arm/mach-s5p6440/gpio.c
+/* linux/arch/arm/mach-s5p64x0/gpio.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * 		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - GPIOlib support
+ * S5P64X0 - GPIOlib support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- */
+*/
 
 #include <linux/kernel.h>
 #include <linux/irq.h>
@@ -22,26 +22,29 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
-/* GPIO bank summary:
-*
-* Bank	GPIOs	Style	SlpCon	ExtInt Group
-* A	6	4Bit	Yes	1
-* B	7	4Bit	Yes	1
-* C	8	4Bit	Yes	2
-* F	2	2Bit	Yes	4 [1]
-* G	7	4Bit	Yes	5
-* H	10	4Bit[2]	Yes	6
-* I	16	2Bit	Yes	None
-* J	12	2Bit	Yes	None
-* N	16	2Bit	No	IRQ_EINT
-* P	8	2Bit	Yes	8
-* R	15	4Bit[2]	Yes	8
-*
-* [1] BANKF pins 14,15 do not form part of the external interrupt sources
-* [2] BANK has two control registers, GPxCON0 and GPxCON1
-*/
+/* To be implemented S5P6450 GPIO */
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
 
-static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
 					     unsigned int offset)
 {
 	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
@@ -77,7 +80,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
 	return 0;
 }
 
-static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
 					      unsigned int offset, int value)
 {
 	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
@@ -124,12 +127,11 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
 				   unsigned int off, unsigned int cfg)
 {
 	void __iomem *reg = chip->base;
 	unsigned int shift;
-	unsigned long flags;
 	u32 con;
 
 	switch (off) {
@@ -155,26 +157,22 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
 		cfg <<= shift;
 	}
 
-	s3c_gpio_lock(chip, flags);
-
 	con = __raw_readl(reg);
 	con &= ~(0xf << shift);
 	con |= cfg;
 	__raw_writel(con, reg);
 
-	s3c_gpio_unlock(chip, flags);
-
 	return 0;
 }
 
-static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
 	{
 		.cfg_eint	= 0,
 	}, {
 		.cfg_eint	= 7,
 	}, {
 		.cfg_eint	= 3,
-		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
+		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
 	}, {
 		.cfg_eint	= 0,
 		.set_config	= s3c_gpio_setcfg_s3c24xx,
@@ -193,7 +191,7 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
 static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 	{
 		.base	= S5P6440_GPA_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPA(0),
 			.ngpio	= S5P6440_GPIO_A_NR,
@@ -201,7 +199,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPB_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPB(0),
 			.ngpio	= S5P6440_GPIO_B_NR,
@@ -209,7 +207,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPC_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPC(0),
 			.ngpio	= S5P6440_GPIO_C_NR,
@@ -217,7 +215,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPG_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPG(0),
 			.ngpio	= S5P6440_GPIO_G_NR,
@@ -229,7 +227,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 	{
 		.base	= S5P6440_GPH_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPH(0),
 			.ngpio	= S5P6440_GPIO_H_NR,
@@ -238,10 +236,10 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 	},
 };
 
-static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
 	{
 		.base	= S5P6440_GPR_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[2],
+		.config	= &s5p64x0_gpio_cfgs[2],
 		.chip	= {
 			.base	= S5P6440_GPR(0),
 			.ngpio	= S5P6440_GPIO_R_NR,
@@ -253,7 +251,7 @@ static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
 static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	{
 		.base	= S5P6440_GPF_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
+		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPF(0),
 			.ngpio	= S5P6440_GPIO_F_NR,
@@ -261,7 +259,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPI_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
+		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPI(0),
 			.ngpio	= S5P6440_GPIO_I_NR,
@@ -269,7 +267,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPJ_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
+		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPJ(0),
 			.ngpio	= S5P6440_GPIO_J_NR,
@@ -277,7 +275,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPN_BASE,
-		.config	= &s5p6440_gpio_cfgs[4],
+		.config	= &s5p64x0_gpio_cfgs[4],
 		.chip	= {
 			.base	= S5P6440_GPN(0),
 			.ngpio	= S5P6440_GPIO_N_NR,
@@ -285,7 +283,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPP_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
+		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPP(0),
 			.ngpio	= S5P6440_GPIO_P_NR,
@@ -294,7 +292,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	},
 };
 
-void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
 {
 	for (; nr_chips > 0; nr_chips--, chipcfg++) {
 		if (!chipcfg->set_config)
@@ -308,13 +306,13 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
 	}
 }
 
-static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
 						int nr_chips)
 {
 	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
 		chip->chip.direction_output =
-					s5p6440_gpiolib_rbank_4bit2_output;
+					s5p64x0_gpiolib_rbank_4bit2_output;
 		s3c_gpiolib_add(chip);
 	}
 }
@@ -324,8 +322,8 @@ static int __init s5p6440_gpiolib_init(void)
 	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
 	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
 
-	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
-				ARRAY_SIZE(s5p6440_gpio_cfgs));
+	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
+				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
 	for (; nr_chips > 0; nr_chips--, chips++)
 		s3c_gpiolib_add(chips);
@@ -336,8 +334,8 @@ static int __init s5p6440_gpiolib_init(void)
 	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
 				ARRAY_SIZE(s5p6440_gpio_4bit2));
 
-	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
-				ARRAY_SIZE(gpio_rbank_4bit2));
+	s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
new file mode 100644
index 0000000..79b04e6
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#include <plat/regs-serial.h>
+
+	.macro addruart, rp, rv
+		mov	\rp, #0xE0000000
+		orr	\rp, \rp, #0x00100000
+		ldr	\rp, [\rp, #0x118 ]
+		and	\rp, \rp, #0xff000
+		teq	\rp, #0x50000		@@ S5P6450
+		ldreq	\rp, =0xEC800000
+		movne	\rp, #0xEC000000	@@ S5P6440
+		ldrne	\rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb..81209eb 100644
--- a/arch/arm/mach-s5p6440/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index e65f1b9..10b62b4 100644
--- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * Low-level IRQ helper macros for the Samsung S5P6440
+ * Low-level IRQ helper macros for the Samsung S5P64X0
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
new file mode 100644
index 0000000..5486c8f
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -0,0 +1,139 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+#define S5P6450_GPIO_A_NR	(6)
+#define S5P6450_GPIO_B_NR	(7)
+#define S5P6450_GPIO_C_NR	(8)
+#define S5P6450_GPIO_D_NR	(8)
+#define S5P6450_GPIO_F_NR	(2)
+#define S5P6450_GPIO_G_NR	(14)
+#define S5P6450_GPIO_H_NR	(10)
+#define S5P6450_GPIO_I_NR	(16)
+#define S5P6450_GPIO_J_NR	(12)
+#define S5P6450_GPIO_K_NR	(5)
+#define S5P6450_GPIO_N_NR	(16)
+#define S5P6450_GPIO_P_NR	(11)
+#define S5P6450_GPIO_Q_NR	(14)
+#define S5P6450_GPIO_R_NR	(15)
+#define S5P6450_GPIO_S_NR	(8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P64X0_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p6440_gpio_number {
+	S5P6440_GPIO_A_START	= 0,
+	S5P6440_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+enum s5p6450_gpio_number {
+	S5P6450_GPIO_A_START	= 0,
+	S5P6450_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
+	S5P6450_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
+	S5P6450_GPIO_D_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
+	S5P6450_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
+	S5P6450_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
+	S5P6450_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
+	S5P6450_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
+	S5P6450_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
+	S5P6450_GPIO_K_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
+	S5P6450_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
+	S5P6450_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
+	S5P6450_GPIO_Q_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
+	S5P6450_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
+	S5P6450_GPIO_S_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
+};
+
+/* GPIO number definitions */
+
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+#define S5P6450_GPA(_nr)	(S5P6450_GPIO_A_START + (_nr))
+#define S5P6450_GPB(_nr)	(S5P6450_GPIO_B_START + (_nr))
+#define S5P6450_GPC(_nr)	(S5P6450_GPIO_C_START + (_nr))
+#define S5P6450_GPD(_nr)	(S5P6450_GPIO_D_START + (_nr))
+#define S5P6450_GPF(_nr)	(S5P6450_GPIO_F_START + (_nr))
+#define S5P6450_GPG(_nr)	(S5P6450_GPIO_G_START + (_nr))
+#define S5P6450_GPH(_nr)	(S5P6450_GPIO_H_START + (_nr))
+#define S5P6450_GPI(_nr)	(S5P6450_GPIO_I_START + (_nr))
+#define S5P6450_GPJ(_nr)	(S5P6450_GPIO_J_START + (_nr))
+#define S5P6450_GPK(_nr)	(S5P6450_GPIO_K_START + (_nr))
+#define S5P6450_GPN(_nr)	(S5P6450_GPIO_N_START + (_nr))
+#define S5P6450_GPP(_nr)	(S5P6450_GPIO_P_START + (_nr))
+#define S5P6450_GPQ(_nr)	(S5P6450_GPIO_Q_START + (_nr))
+#define S5P6450_GPR(_nr)	(S5P6450_GPIO_R_START + (_nr))
+#define S5P6450_GPS(_nr)	(S5P6450_GPIO_S_START + (_nr))
+
+/* the end of the S5P64X0 specific gpios */
+
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S5P6450_GPIO_END	(S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
+
+#define S5P64X0_GPIO_END	(S5P6440_GPIO_END > S5P6450_GPIO_END ?	\
+				 S5P6440_GPIO_END : S5P6450_GPIO_END)
+
+#define S3C_GPIO_END		S5P64X0_GPIO_END
+
+/* define the number of gpios we need to the one after the last GPIO range */
+
+#define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
index be8b26e..d3e8799 100644
--- a/arch/arm/mach-s5p6440/include/mach/hardware.h
+++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Hardware support
+ * S5P64X0 - Hardware support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h
new file mode 100644
index 0000000..887d252
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 I2C configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
+
+extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h
new file mode 100644
index 0000000..a3e095c
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/io.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P64X0 based
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 16a7612..513abff 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -1,17 +1,17 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - IRQ definitions
+ * S5P64X0 - IRQ definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_S5P_IRQS_H
-#define __ASM_ARCH_S5P_IRQS_H __FILE__
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
 
 #include <plat/irqs.h>
 
@@ -20,10 +20,12 @@
 #define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
 #define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
 #define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIS1		S5P_IRQ_VIC0(3)	/* for only S5P6450 */
+#define IRQ_IIS2		S5P_IRQ_VIC0(4)	/* for only S5P6450 */
 #define IRQ_IIC1		S5P_IRQ_VIC0(5)
 #define IRQ_I2SV40		S5P_IRQ_VIC0(6)
-#define IRQ_GPS			S5P_IRQ_VIC0(7)
-#define IRQ_POST0		S5P_IRQ_VIC0(9)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)	/* for only S5P6450 */
+
 #define IRQ_2D			S5P_IRQ_VIC0(11)
 #define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
 #define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
@@ -39,22 +41,26 @@
 
 #define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
 #define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_PCM1		S5P_IRQ_VIC1(3)	/* for only S5P6450 */
+#define IRQ_PCM2		S5P_IRQ_VIC1(4)	/* for only S5P6450 */
 #define IRQ_UART0		S5P_IRQ_VIC1(5)
 #define IRQ_UART1		S5P_IRQ_VIC1(6)
 #define IRQ_UART2		S5P_IRQ_VIC1(7)
 #define IRQ_UART3		S5P_IRQ_VIC1(8)
 #define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_UART4		S5P_IRQ_VIC1(10)	/* S5P6450 */
+#define IRQ_UART5		S5P_IRQ_VIC1(11)	/* S5P6450 */
 #define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_USI			S5P_IRQ_VIC1(15)	/* S5P6450 */
 #define IRQ_SPI0		S5P_IRQ_VIC1(16)
 #define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(17)	/* Shared */
 #define IRQ_IIC			S5P_IRQ_VIC1(18)
 #define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
-#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
 #define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
-#define IRQ_PMU			S5P_IRQ_VIC1(23)
+#define IRQ_PMU			S5P_IRQ_VIC1(23)	/* S5P6440 */
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
 #define IRQ_OTG			S5P_IRQ_VIC1(26)
 #define IRQ_DSI			S5P_IRQ_VIC1(27)
 #define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
@@ -63,6 +69,24 @@
 #define IRQ_TC			IRQ_PENDN
 #define IRQ_ADC			S5P_IRQ_VIC1(31)
 
+/* UART interrupts, S5P6450 has 5 UARTs */
+#define IRQ_S5P_UART_BASE4	(96)
+#define IRQ_S5P_UART_BASE5	(100)
+
+#define IRQ_S5P_UART_RX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR4	(IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR5	(IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX4		IRQ_S5P_UART_RX4
+#define IRQ_S3CUART_RX5		IRQ_S5P_UART_RX5
+
+/* S5P6450 EINT feature will be added */
+
 /*
  * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
  * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
@@ -115,4 +139,4 @@
 
 #define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
 
-#endif /* __ASM_ARCH_S5P_IRQS_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
new file mode 100644
index 0000000..31e5341
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P64X0_PA_SDRAM	(0x20000000)
+
+#define S5P64X0_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+
+#define S5P64X0_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+
+#define S5P64X0_PA_GPIO		(0xE0308000)
+
+#define S5P64X0_PA_VIC0		(0xE4000000)
+#define S5P64X0_PA_VIC1		(0xE4100000)
+
+#define S5P64X0_PA_PDMA		(0xE9000000)
+
+#define S5P64X0_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
+#define S5P64X0_PA_RTC		(0xEA100000)
+
+#define S5P64X0_PA_WDT		(0xEA200000)
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+#define S5P6440_PA_IIC1		(0xEC20F000)
+#define S5P6450_PA_IIC0		(0xEC100000)
+#define S5P6450_PA_IIC1		(0xEC200000)
+
+#define S5P64X0_PA_SPI0		(0xEC400000)
+#define S5P64X0_PA_SPI1		(0xEC500000)
+
+#define S5P64X0_PA_HSOTG	(0xED100000)
+
+#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S		(0xF2000000)
+
+#define S5P64X0_PA_PCM		(0xF2100000)
+
+#define S5P64X0_PA_ADC		(0xF3000000)
+
+/* compatibiltiy defines. */
+
+#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
+#define S3C_PA_RTC		S5P64X0_PA_RTC
+#define S3C_PA_WDT		S5P64X0_PA_WDT
+
+#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
index d62910c..1b036b0 100644
--- a/arch/arm/mach-s5p6440/include/mach/memory.h
+++ b/arch/arm/mach-s5p64x0/include/mach/memory.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Memory definitions
+ * S5P64X0 - Memory definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,9 +11,9 @@
 */
 
 #ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
 
-#define PHYS_OFFSET     	UL(0x20000000)
+#define PHYS_OFFSET		UL(0x20000000)
 #define CONSISTENT_DMA_SIZE	SZ_8M
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
index 6a2a02f..19fff8b 100644
--- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
@@ -1,16 +1,14 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6440 - pwm clock and timer support
+ * S5P64X0 - pwm clock and timer support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
new file mode 100644
index 0000000..58e1bc8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+
+#define S5P64X0_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P64X0_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P64X0_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P64X0_EPLL_CON_K		S5P_CLKREG(0x18)
+
+#define S5P64X0_CLK_SRC0		S5P_CLKREG(0x1C)
+
+#define S5P64X0_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P64X0_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P64X0_CLK_DIV2		S5P_CLKREG(0x28)
+
+#define S5P64X0_CLK_GATE_HCLK0		S5P_CLKREG(0x30)
+#define S5P64X0_CLK_GATE_PCLK		S5P_CLKREG(0x34)
+#define S5P64X0_CLK_GATE_SCLK0		S5P_CLKREG(0x38)
+#define S5P64X0_CLK_GATE_MEM0		S5P_CLKREG(0x3C)
+
+#define S5P64X0_CLK_DIV3		S5P_CLKREG(0x40)
+
+#define S5P64X0_CLK_GATE_HCLK1		S5P_CLKREG(0x44)
+#define S5P64X0_CLK_GATE_SCLK1		S5P_CLKREG(0x48)
+
+#define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
+#define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
+
+#define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
+
+#define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
+#define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
+
+#define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+
+#define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
+#define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+
+#define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
+
+/* Compatibility defines */
+
+#define ARM_CLK_DIV			S5P64X0_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 82ff753..85f448e 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -1,21 +1,24 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - GPIO register definitions
+ * S5P64X0 - GPIO register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H __FILE__
 
 #include <mach/map.h>
 
+/* Will be implemented S5P6442 GPIOlib */
+
 /* Base addresses for each of the banks */
+
 #define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
 #define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
 #define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
@@ -27,6 +30,7 @@
 #define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
 #define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
 #define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+
 #define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
 #define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
 #define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
@@ -34,19 +38,23 @@
 #define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
 
 /* for LCD */
+
 #define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
 #define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
 
-/* These set of macros are not really useful for the
- * GPF/GPI/GPJ/GPN/GPP,
- * useful for others set of GPIO's (4 bit)
+/*
+ * These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit)
  */
+
 #define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
 #define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
 #define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
 
-/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
- * */
+/*
+ * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ */
+
 #define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
 #define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
 #define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
index a961f4b..4aaebda 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - IRQ register definitions
+ * S5P64X0 - IRQ register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
new file mode 100644
index 0000000..ff85b4b
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p64x0 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk clk_mout_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_mout_epll;
+
+extern int s5p64x0_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
+
+extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
+extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
+extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
+
+extern struct clk_ops s5p64x0_clkarm_ops;
+
+extern struct clksrc_clk clk_armclk;
+extern struct clksrc_clk clk_dout_mpll;
+
+extern struct clk *clkset_hclk_low_list[];
+extern struct clksrc_sources clkset_hclk_low;
+
+extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
+
+extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
new file mode 100644
index 0000000..170a20a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+#define S5P64X0_SPI_SRCCLK_PCLK		0
+#define S5P64X0_SPI_SRCCLK_SCLK		1
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
index a359ee3..60f5753 100644
--- a/arch/arm/mach-s5p6440/include/mach/system.h
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - system support header
+ * S5P64X0 - system support header
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
index 2f25c7f..00aa7f1 100644
--- a/arch/arm/mach-s5p6440/include/mach/tick.h
+++ b/arch/arm/mach-s5p64x0/include/mach/tick.h
@@ -1,9 +1,14 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Timer tick support definitions
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - Timer tick support definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
index fb2e8cd..4b91faa 100644
--- a/arch/arm/mach-s5p6440/include/mach/timex.h
+++ b/arch/arm/mach-s5p64x0/include/mach/timex.h
@@ -1,9 +1,12 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C6400 - time parameters
+ * S5P64X0 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 0000000..c65b229
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+static unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+	unsigned int chipid;
+
+	chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+	if ((chipid & 0xff000) == 0x50000)
+		uart_base += 0xEC800000;
+	else
+		uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+	/*
+	 * we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+
+	/*
+	 * Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
index e3f0eeb..97a9df3 100644
--- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
@@ -1,4 +1,7 @@
-/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
  *
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
new file mode 100644
index 0000000..79833ca
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/init.c
@@ -0,0 +1,73 @@
+/* linux/arch/arm/mach-s5p64x0/init.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p64x0_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
+		}
+	}
+}
+
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	int uart;
+
+	for (uart = 0; uart < no; uart++) {
+		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+	}
+
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 9202aaa..28de0a5 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -1,7 +1,7 @@
-/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,21 +21,22 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
 
 #include <plat/regs-serial.h>
-
+#include <plat/gpio-cfg.h>
 #include <plat/s5p6440.h>
 #include <plat/clock.h>
-#include <mach/regs-clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
@@ -58,43 +59,60 @@
 
 static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 };
 
 static struct platform_device *smdk6440_devices[] __initdata = {
-	&s5p6440_device_iis,
 	&s3c_device_adc,
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&s5p6440_device_iis,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c1_cfg_gpio,
 };
 
 static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
@@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 
 static void __init smdk6440_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_SYS_ID);
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
 }
@@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
-	/* I2C */
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
 	i2c_register_board_info(0, smdk6440_i2c_devs0,
 			ARRAY_SIZE(smdk6440_i2c_devs0));
 	i2c_register_board_info(1, smdk6440_i2c_devs1,
@@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void)
 
 MACHINE_START(SMDK6440, "SMDK6440")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.phys_io	= S5P6440_PA_UART(0) & 0xfff00000,
 	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
 
 	.init_irq	= s5p6440_init_irq,
 	.map_io		= smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
new file mode 100644
index 0000000..8e98217
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s5p6450.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6450_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6450_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[4] = {
+		.hwport		= 4,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[5] = {
+		.hwport		= 5,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+};
+
+static struct platform_device *smdk6450_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&s5p6450_device_iis0,
+	/* s5p6450_device_spi0 will be added */
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
+};
+
+static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6450_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s3c24xx_init_clocks(19200000);
+	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+}
+
+static void __init smdk6450_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
+	i2c_register_board_info(0, smdk6450_i2c_devs0,
+			ARRAY_SIZE(smdk6450_i2c_devs0));
+	i2c_register_board_info(1, smdk6450_i2c_devs1,
+			ARRAY_SIZE(smdk6450_i2c_devs1));
+
+	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+}
+
+MACHINE_START(SMDK6450, "SMDK6450")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S5P6450_PA_UART(0) & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6450_init_irq,
+	.map_io		= smdk6450_map_io,
+	.init_machine	= smdk6450_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index 2c99d14..dc4cc65 100644
--- a/arch/arm/mach-s5p6440/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * I2C0 GPIO configuration.
  *
- * Based on plat-s3c64xx/setup-i2c0.c
+ * Based on plat-s3c64x0/setup-i2c0.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,17 +14,29 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+#include <mach/i2c.h>
+
+void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
 }
+
+void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 9a1537f..2edd791 100644
--- a/arch/arm/mach-s5p6440/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -1,7 +1,7 @@
-/* linux/arch/arm/mach-s5p6440/setup-i2c1.c
+/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * I2C1 GPIO configuration.
  *
@@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+#include <mach/i2c.h>
+
+void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
 	s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
 	s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
 }
+
+void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 251c92a..fd2708e 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/cpu.c
  *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -21,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -56,11 +60,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC2),
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
 		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 01b9134..8751ef4 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -44,19 +44,16 @@
 #define S5PC100_PA_OTHERS	(0xE0200000)
 #define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
 
-#define S5P_PA_GPIO		(0xE0300000)
+#define S5PC100_PA_GPIO		(0xE0300000)
 #define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
-#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_PA_VIC0		(0xE4000000)
+#define S5PC100_PA_VIC1		(0xE4100000)
+#define S5PC100_PA_VIC2		(0xE4200000)
 #define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_PA_VIC_OFFSET	0x100000
 #define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
-#define S5P_PA_VIC0		S5PC1XX_PA_VIC(0)
-#define S5P_PA_VIC1		S5PC1XX_PA_VIC(1)
-#define S5P_PA_VIC2		S5PC1XX_PA_VIC(2)
 
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index d3a3895..5315fec 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -53,11 +53,6 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
-config S5PC110_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -71,7 +66,7 @@ config MACH_AQUILA
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC110_DEV_ONENAND
+	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	help
@@ -88,7 +83,7 @@ config MACH_GONI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC110_DEV_ONENAND
+	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	help
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 05048c5..7045489 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
 
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
 
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index cfecd70..d562670 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
 }
 
-static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
-}
-
 static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 77f456c..2f16bfc 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5pv210/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -50,6 +51,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PV210_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
 		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
 		.length		= SZ_16K,
@@ -60,6 +76,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index dd4fb6b..bd9afd5 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -17,7 +17,10 @@
 #include <plat/map-s5p.h>
 
 #define S5PC110_PA_ONENAND	(0xB0000000)
+#define S5P_PA_ONENAND		S5PC110_PA_ONENAND
+
 #define S5PC110_PA_ONENAND_DMA	(0xB0600000)
+#define S5P_PA_ONENAND_DMA	S5PC110_PA_ONENAND_DMA
 
 #define S5PV210_PA_CHIPID	(0xE0000000)
 #define S5P_PA_CHIPID		S5PV210_PA_CHIPID
@@ -26,7 +29,6 @@
 #define S5P_PA_SYSCON		S5PV210_PA_SYSCON
 
 #define S5PV210_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5PV210_PA_GPIO
 
 /* SPI */
 #define S5PV210_PA_SPI0		0xE1300000
@@ -72,16 +74,9 @@
 #define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
 
 #define S5PV210_PA_VIC0		(0xF2000000)
-#define S5P_PA_VIC0		S5PV210_PA_VIC0
-
 #define S5PV210_PA_VIC1		(0xF2100000)
-#define S5P_PA_VIC1		S5PV210_PA_VIC1
-
 #define S5PV210_PA_VIC2		(0xF2200000)
-#define S5P_PA_VIC2		S5PV210_PA_VIC2
-
 #define S5PV210_PA_VIC3		(0xF2300000)
-#define S5P_PA_VIC3		S5PV210_PA_VIC3
 
 #define S5PV210_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 0dda801..bf772de 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -477,7 +477,7 @@ static struct platform_device *aquila_devices[] __initdata = {
 	&aquila_i2c_gpio_pmic,
 	&aquila_device_gpiokeys,
 	&s3c_device_fb,
-	&s5pc110_device_onenand,
+	&s5p_device_onenand,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 53754d7..fdc5cca 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -456,7 +456,7 @@ static void goni_setup_sdhci(void)
 
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
-	&s5pc110_device_onenand,
+	&s5p_device_onenand,
 	&goni_i2c_gpio_pmic,
 	&goni_device_gpiokeys,
 	&s5p_device_fimc0,
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
index e5b261a..4add398 100644
--- a/arch/arm/mach-s5pv310/cpu.c
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
 /* Initial IO mappings */
 static struct map_desc s5pv310_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
-		.length		= SZ_8K,
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
+		.length		= SZ_128K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
@@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_L2CC,
 		.pfn		= __phys_to_pfn(S5PV310_PA_L2CC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO1),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
-		.length		= SZ_128K,
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
 		.type		= MT_DEVICE,
 	},
 };
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
index 4cdedda..471fc3b 100644
--- a/arch/arm/mach-s5pv310/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -68,6 +68,8 @@
 
 #define IRQ_IIC			COMBINER_IRQ(27, 0)
 
+#define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
+
 /* Set the default NR_IRQS */
 
 #define NR_IRQS			COMBINER_IRQ(MAX_COMBINER_NR, 0)
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 213e110..aff6d23 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -25,6 +25,12 @@
 
 #define S5PV310_PA_SYSRAM		(0x02025000)
 
+#define S5PC210_PA_ONENAND		(0x0C000000)
+#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+
+#define S5PC210_PA_ONENAND_DMA		(0x0C600000)
+#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+
 #define S5PV310_PA_CHIPID		(0x10000000)
 #define S5P_PA_CHIPID			S5PV310_PA_CHIPID
 
@@ -46,7 +52,6 @@
 #define S5PV310_PA_GPIO1		(0x11400000)
 #define S5PV310_PA_GPIO2		(0x11000000)
 #define S5PV310_PA_GPIO3		(0x03860000)
-#define S5P_PA_GPIO			S5PV310_PA_GPIO1
 
 #define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index efb1270..71fb173 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void)
 }
 
 #if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
 {
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@@ -222,7 +222,7 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
 {
 	int i;
 
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 817f0ad..7eaa232 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 }
 
 
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
 {
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ab50627..17e7b0b 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	/*
 	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn)))
-		return NULL;
+	if (pfn_valid(pfn)) {
+		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
+		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		WARN_ON(1);
+	}
 
 	type = get_mem_type(mtype);
 	if (!type)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6a3a2d0..e8ed9dc 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -248,7 +248,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC,
+				L_PTE_WRITE | L_PTE_EXEC,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
@@ -259,7 +259,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_NONCACHED] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+				L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7563ff0..197f21b 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -253,6 +253,14 @@ __v7_setup:
 	orreq	r10, r10, #1 << 22		@ set bit #22
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_743622
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 6		@ set bit #6
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
 3:	mov	r10, #0
 #ifdef HARVARD_CACHE
@@ -365,7 +373,7 @@ __v7_ca9mp_proc_info:
 	b	__v7_ca9mp_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index a202a2c..6cd151b 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index c6a855d..2596096 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
+	depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
 	default y
 	select ARM_VIC if !ARCH_S5PV310
 	select ARM_GIC if ARCH_S5PV310
@@ -30,7 +30,7 @@ config S5P_EXT_INT
 	bool
 	help
 	  Use the external interrupts (other than GPIO interrupts.)
-	  Note: Do not choose this for S5P6440.
+	  Note: Do not choose this for S5P6440 and S5P6450.
 
 config S5P_DEV_FIMC0
 	bool
@@ -46,3 +46,8 @@ config S5P_DEV_FIMC2
 	bool
 	help
 	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index b2e0296..f3e917e 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
 obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
+obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index b5e2552..8aaf4e6 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -74,6 +74,13 @@ struct clk clk_fout_epll = {
 	.ctrlbit	= (1 << 31),
 };
 
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+	.name		= "fout_dpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
 /* VPLL clock output */
 struct clk clk_fout_vpll = {
 	.name		= "fout_vpll",
@@ -122,6 +129,17 @@ struct clksrc_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+	[0] = &clk_fin_dpll,
+	[1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+	.sources	= clk_src_dpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
+};
+
 struct clk clk_vpll = {
 	.name		= "vpll",
 	.id		= -1,
@@ -145,6 +163,7 @@ static struct clk *s5p_clks[] __initdata = {
 	&clk_fout_apll,
 	&clk_fout_mpll,
 	&clk_fout_epll,
+	&clk_fout_dpll,
 	&clk_fout_vpll,
 	&clk_arm,
 	&clk_vpll,
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index b07a078..74f7f5a 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -19,6 +19,7 @@
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
 #include <plat/s5p6442.h>
+#include <plat/s5p6450.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
 #include <plat/s5pv310.h>
@@ -27,6 +28,7 @@
 
 static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
+static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_s5pv310[] = "S5PV310";
@@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
-		.init		= s5p6440_init,
+		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
 		.idcode		= 0x36442000,
@@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s5p6442_init,
 		.name		= name_s5p6442,
 	}, {
+		.idcode		= 0x36450000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6450_map_io,
+		.init_clocks	= s5p6450_init_clocks,
+		.init_uarts	= s5p6450_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6450,
+	}, {
 		.idcode		= 0x43100000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5pc100_map_io,
@@ -89,33 +99,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-#ifdef CONFIG_ARM_VIC
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-#endif
-	}, {
 		.virtual	= (unsigned long)S3C_VA_TIMER,
 		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
 		.pfn		= __phys_to_pfn(S3C_PA_WDT),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
index f8ede33..6db9262 100644
--- a/arch/arm/mach-s5pv210/dev-onenand.c
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -1,10 +1,12 @@
-/*
- * linux/arch/arm/mach-s5pv210/dev-onenand.c
+/* linux/arch/arm/plat-s5p/dev-onenand.c
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  *  Copyright (c) 2008-2010 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
- * S5PC110 series device definition for OneNAND devices
+ * S5P series device definition for OneNAND devices
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,15 +21,15 @@
 #include <mach/irqs.h>
 #include <mach/map.h>
 
-static struct resource s5pc110_onenand_resources[] = {
+static struct resource s5p_onenand_resources[] = {
 	[0] = {
-		.start	= S5PC110_PA_ONENAND,
-		.end	= S5PC110_PA_ONENAND + SZ_128K - 1,
+		.start	= S5P_PA_ONENAND,
+		.end	= S5P_PA_ONENAND + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= S5PC110_PA_ONENAND_DMA,
-		.end	= S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
+		.start	= S5P_PA_ONENAND_DMA,
+		.end	= S5P_PA_ONENAND_DMA + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
@@ -37,19 +39,19 @@ static struct resource s5pc110_onenand_resources[] = {
 	},
 };
 
-struct platform_device s5pc110_device_onenand = {
+struct platform_device s5p_device_onenand = {
 	.name		= "s5pc110-onenand",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pc110_onenand_resources),
-	.resource	= s5pc110_onenand_resources,
+	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
+	.resource	= s5p_onenand_resources,
 };
 
-void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
+void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
 {
 	struct onenand_platform_data *pd;
 
 	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
 	if (!pd)
 		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	s5pc110_device_onenand.dev.platform_data = pd;
+	s5p_device_onenand.dev.platform_data = pd;
 }
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index a89331e..6a73428 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = {
 #endif
 };
 
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[0] = {
+		.start	= S5P_PA_UART4,
+		.end	= S5P_PA_UART4 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX4,
+		.end	= IRQ_S5P_UART_RX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX4,
+		.end	= IRQ_S5P_UART_TX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR4,
+		.end	= IRQ_S5P_UART_ERR4,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[0] = {
+		.start	= S5P_PA_UART5,
+		.end	= S5P_PA_UART5 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX5,
+		.end	= IRQ_S5P_UART_RX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX5,
+		.end	= IRQ_S5P_UART_TX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR5,
+		.end	= IRQ_S5P_UART_ERR5,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
 struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 	[0] = {
 		.resources	= s5p_uart0_resource,
@@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 		.resources	= s5p_uart3_resource,
 		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
 	},
+	[4] = {
+		.resources	= s5p_uart4_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
+	},
+	[5] = {
+		.resources	= s5p_uart5_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
+	},
 };
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 4e8fe08..bf28fad 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 }
 
 #define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
 #define PLL46XX_MDIV_MASK	(0x1FF)
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
@@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 enum pll46xx_type_t {
 	pll_4600,
 	pll_4650,
+	pll_4650c,
 };
 
 static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
@@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
 
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
 	tmp = baseclk;
 
 	if (pll_type == pll_4600) {
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index 09418b1..17036c8 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Header file for s5p clock support
  *
@@ -20,6 +20,7 @@
 #define clk_fin_apll clk_ext_xtal_mux
 #define clk_fin_mpll clk_ext_xtal_mux
 #define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
 #define clk_fin_vpll clk_ext_xtal_mux
 #define clk_fin_hpll clk_ext_xtal_mux
 
@@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_mpll;
 extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
 extern struct clk clk_arm;
 extern struct clk clk_vpll;
@@ -37,8 +39,8 @@ extern struct clk clk_vpll;
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_mpll;
 extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
 
-extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
 extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
 
 #endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
index a4cd75a..528585d 100644
--- a/arch/arm/plat-s5p/include/plat/s5p6440.h
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -12,24 +12,23 @@
 
  /* Common init code for S5P6440 related SoCs */
 
-extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s5p6440_register_clocks(void);
 extern void s5p6440_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p6440_init(void);
+extern  int s5p64x0_init(void);
 extern void s5p6440_init_irq(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
-#define s5p6440_init_uarts s5p6440_common_init_uarts
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 #else
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p6440_init NULL
+#define s5p64x0_init NULL
 #endif
 
 /* S5P6440 timer */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h
new file mode 100644
index 0000000..640a41c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6450.h
@@ -0,0 +1,36 @@
+/* arch/arm/plat-s5p/include/plat/s5p6450.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p6450 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6450 related SoCs */
+
+extern void s5p6450_register_clocks(void);
+extern void s5p6450_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_init_irq(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6450 timer */
+
+extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 04d9521..e8f2be2 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
-	unsigned long flags;
 
 	clk_enable(adc->clk);
 	enable_irq(adc->irq);
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 90a2051..e8d20b0 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -48,6 +48,9 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
 /* clock information */
 
 static LIST_HEAD(clocks);
@@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable)
 	return 0;
 }
 
+static int dev_is_s3c_uart(struct device *dev)
+{
+	struct platform_device **pdev = s3c24xx_uart_devs;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
+		if (*pdev && dev == &(*pdev)->dev)
+			return 1;
+	return 0;
+}
+
+/*
+ * Serial drivers call get_clock() very early, before platform bus
+ * has been set up, this requires a special check to let them get
+ * a proper clock
+ */
+
+static int dev_is_platform_device(struct device *dev)
+{
+	return dev->bus == &platform_bus_type ||
+	       (dev->bus == NULL && dev_is_s3c_uart(dev));
+}
+
 /* Clock API calls */
 
 struct clk *clk_get(struct device *dev, const char *id)
@@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
+	if (dev == NULL || !dev_is_platform_device(dev))
 		idno = -1;
 	else
 		idno = to_platform_device(dev)->id;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 6412933..9addb3d 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -79,7 +79,7 @@ extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
-extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p64x0_sysclass;
 extern struct sysdev_class s5p6442_sysclass;
 extern struct sysdev_class s5pv210_sysclass;
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 85f6f23..7d448e1 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -67,13 +67,15 @@ extern struct platform_device s5pv210_device_spi0;
 extern struct platform_device s5pv210_device_spi1;
 extern struct platform_device s5p6440_device_spi0;
 extern struct platform_device s5p6440_device_spi1;
+extern struct platform_device s5p6450_device_spi0;
+extern struct platform_device s5p6450_device_spi1;
 
 extern struct platform_device s3c_device_hwmon;
 
 extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_onenand;
 extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s5pc110_device_onenand;
+extern struct platform_device s5p_device_onenand;
 
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
@@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi;
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
+extern struct platform_device s5p6450_device_iis0;
+extern struct platform_device s5p6450_device_pcm0;
+
 extern struct platform_device s5pc100_device_ac97;
 extern struct platform_device s5pc100_device_pcm0;
 extern struct platform_device s5pc100_device_pcm1;
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
index 5fe6721..8107442 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
@@ -32,6 +32,12 @@ enum dma_ch {
 	DMACH_UART2_TX,
 	DMACH_UART3_RX,
 	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
 	DMACH_IRDA,
 	DMACH_I2S0_RX,
 	DMACH_I2S0_TX,
@@ -64,6 +70,20 @@ enum dma_ch {
 	DMACH_MSM_REQ2,
 	DMACH_MSM_REQ1,
 	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 	/* END Marker, also used to denote a reserved channel */
 	DMACH_MAX,
 };
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index e5aba8f..ae8e802 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -65,7 +65,7 @@ struct s3c64xx_spi_info {
 extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
index 96e28f1..1ca64b4 100644
--- a/arch/mips/include/asm/siginfo.h
+++ b/arch/mips/include/asm/siginfo.h
@@ -88,6 +88,7 @@ typedef struct siginfo {
 #ifdef __ARCH_SI_TRAPNO
 			int _trapno;	/* TRAP # which caused the signal */
 #endif
+			short _addr_lsb;
 		} _sigfault;
 
 		/* SIGPOLL, SIGXFSZ (To do ...)  */
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 0350311..2d93bdb 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -34,7 +34,7 @@
 #include <asm/ia32.h>
 
 #undef WARN_OLD
-#undef CORE_DUMP /* probably broken */
+#undef CORE_DUMP /* definitely broken */
 
 static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
 static int load_aout_library(struct file *);
@@ -131,21 +131,15 @@ static void set_brk(unsigned long start, unsigned long end)
  * macros to write out all the necessary info.
  */
 
-static int dump_write(struct file *file, const void *addr, int nr)
-{
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
+#include <linux/coredump.h>
 
 #define DUMP_WRITE(addr, nr)			     \
 	if (!dump_write(file, (void *)(addr), (nr))) \
 		goto end_coredump;
 
-#define DUMP_SEEK(offset)						\
-	if (file->f_op->llseek) {					\
-		if (file->f_op->llseek(file, (offset), 0) != (offset))	\
-			goto end_coredump;				\
-	} else								\
-		file->f_pos = (offset)
+#define DUMP_SEEK(offset)		\
+	if (!dump_seek(file, offset))	\
+		goto end_coredump;
 
 #define START_DATA()	(u.u_tsize << PAGE_SHIFT)
 #define START_STACK(u)	(u.start_stack)
@@ -217,12 +211,6 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
 		dump_size = dump.u_ssize << PAGE_SHIFT;
 		DUMP_WRITE(dump_start, dump_size);
 	}
-	/*
-	 * Finally dump the task struct.  Not be used by gdb, but
-	 * could be useful
-	 */
-	set_fs(KERNEL_DS);
-	DUMP_WRITE(current, sizeof(*current));
 end_coredump:
 	set_fs(fs);
 	return has_dumped;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 5e97529..39aaee5 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -141,6 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 				address = (low & MASK_BLKPTR_LO) >> 21;
 				if (!address)
 					break;
+
 				address += MCG_XBLK_ADDR;
 			} else
 				++address;
@@ -148,12 +149,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			if (rdmsr_safe(address, &low, &high))
 				break;
 
-			if (!(high & MASK_VALID_HI)) {
-				if (block)
-					continue;
-				else
-					break;
-			}
+			if (!(high & MASK_VALID_HI))
+				continue;
 
 			if (!(high & MASK_CNTP_HI)  ||
 			     (high & MASK_LOCKED_HI))
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index d9368ee..169d880 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -216,7 +216,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
 		err = sysfs_add_file_to_group(&sys_dev->kobj,
 					      &attr_core_power_limit_count.attr,
 					      thermal_attr_group.name);
-	if (cpu_has(c, X86_FEATURE_PTS))
+	if (cpu_has(c, X86_FEATURE_PTS)) {
 		err = sysfs_add_file_to_group(&sys_dev->kobj,
 					      &attr_package_throttle_count.attr,
 					      thermal_attr_group.name);
@@ -224,6 +224,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
 			err = sysfs_add_file_to_group(&sys_dev->kobj,
 					&attr_package_power_limit_count.attr,
 					thermal_attr_group.name);
+	}
 
 	return err;
 }
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index bc5b9b8..81ed28c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -766,7 +766,6 @@ static void init_vmcb(struct vcpu_svm *svm)
 
 	control->iopm_base_pa = iopm_base;
 	control->msrpm_base_pa = __pa(svm->msrpm);
-	control->tsc_offset = 0;
 	control->int_ctl = V_INTR_MASKING_MASK;
 
 	init_seg(&save->es);
@@ -902,6 +901,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
 	svm->asid_generation = 0;
 	init_vmcb(svm);
+	svm->vmcb->control.tsc_offset = 0-native_read_tsc();
 
 	err = fx_init(&svm->vcpu);
 	if (err)
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index f9897f7..9c0d0d3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -420,9 +420,11 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
-	for_each_node_mask(i, nodes_parsed)
-		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
-						nodes[i].end >> PAGE_SHIFT);
+	for (i = 0; i < num_node_memblks; i++)
+		e820_register_active_regions(memblk_nodeid[i],
+				node_memblk_range[i].start >> PAGE_SHIFT,
+				node_memblk_range[i].end >> PAGE_SHIFT);
+
 	/* for out of order entries in SRAT */
 	sort_node_map();
 	if (!nodes_cover_memory(nodes)) {
diff --git a/block/elevator.c b/block/elevator.c
index 205b09a..4e11559 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -938,6 +938,7 @@ int elv_register_queue(struct request_queue *q)
 			}
 		}
 		kobject_uevent(&e->kobj, KOBJ_ADD);
+		e->registered = 1;
 	}
 	return error;
 }
@@ -947,6 +948,7 @@ static void __elv_unregister_queue(struct elevator_queue *e)
 {
 	kobject_uevent(&e->kobj, KOBJ_REMOVE);
 	kobject_del(&e->kobj);
+	e->registered = 0;
 }
 
 void elv_unregister_queue(struct request_queue *q)
@@ -1042,11 +1044,13 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 
 	spin_unlock_irq(q->queue_lock);
 
-	__elv_unregister_queue(old_elevator);
+	if (old_elevator->registered) {
+		__elv_unregister_queue(old_elevator);
 
-	err = elv_register_queue(q);
-	if (err)
-		goto fail_register;
+		err = elv_register_queue(q);
+		if (err)
+			goto fail_register;
+	}
 
 	/*
 	 * finally exit old elevator and turn off BYPASS.
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index f761960..af308d0 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -204,6 +204,23 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		},
 	},
 	{
+	/*
+	 * There have a NVIF method in MSI GX723 DSDT need call by Nvidia
+	 * driver (e.g. nouveau) when user press brightness hotkey.
+	 * Currently, nouveau driver didn't do the job and it causes there
+	 * have a infinite while loop in DSDT when user press hotkey.
+	 * We add MSI GX723's dmi information to this table for workaround
+	 * this issue.
+	 * Will remove MSI GX723 from the table after nouveau grows support.
+	 */
+	.callback = dmi_disable_osi_vista,
+	.ident = "MSI GX723",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
+		},
+	},
+	{
 	.callback = dmi_disable_osi_vista,
 	.ident = "Sony VGN-NS10J_S",
 	.matches = {
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index b618f88..bec561c 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -346,4 +346,5 @@ void __init acpi_early_processor_set_pdc(void)
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
 			    early_init_pdc, NULL, NULL, NULL);
+	acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL);
 }
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ee9ddeb..8cb0347 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3156,7 +3156,6 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 {  
 	struct atm_dev *dev;  
 	IADEV *iadev;  
-        unsigned long flags;
 	int ret;
 
 	iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
@@ -3188,19 +3187,14 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 	ia_dev[iadev_count] = iadev;
 	_ia_dev[iadev_count] = dev;
 	iadev_count++;
-	spin_lock_init(&iadev->misc_lock);
-	/* First fixes first. I don't want to think about this now. */
-	spin_lock_irqsave(&iadev->misc_lock, flags); 
 	if (ia_init(dev) || ia_start(dev)) {  
 		IF_INIT(printk("IA register failed!\n");)
 		iadev_count--;
 		ia_dev[iadev_count] = NULL;
 		_ia_dev[iadev_count] = NULL;
-		spin_unlock_irqrestore(&iadev->misc_lock, flags); 
 		ret = -EINVAL;
 		goto err_out_deregister_dev;
 	}
-	spin_unlock_irqrestore(&iadev->misc_lock, flags); 
 	IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
 
 	iadev->next_board = ia_boards;  
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index b2cd20f..077735e 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -1022,7 +1022,7 @@ typedef struct iadev_t {
 	struct dle_q rx_dle_q;  
 	struct free_desc_q *rx_free_desc_qhead;  
 	struct sk_buff_head rx_dma_q;  
-        spinlock_t rx_lock, misc_lock;
+	spinlock_t rx_lock;
 	struct atm_vcc **rx_open;	/* list of all open VCs */  
         u16 num_rx_desc, rx_buf_sz, rxing;
         u32 rx_pkt_ram, rx_tmp_cnt;
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index f916ddf..f46138a 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -444,6 +444,7 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 	struct solos_card *card = atmdev->dev_data;
 	struct sk_buff *skb;
+	unsigned int len;
 
 	spin_lock(&card->cli_queue_lock);
 	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
@@ -451,11 +452,12 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 	if(skb == NULL)
 		return sprintf(buf, "No data.\n");
 
-	memcpy(buf, skb->data, skb->len);
-	dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
+	len = skb->len;
+	memcpy(buf, skb->data, len);
+	dev_dbg(&card->dev->dev, "len: %d\n", len);
 
 	kfree_skb(skb);
-	return skb->len;
+	return len;
 }
 
 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 2aafafc..1101e25 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -202,6 +202,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
 	struct virtio_blk *vblk = disk->private_data;
 	struct request *req;
 	struct bio *bio;
+	int err;
 
 	bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES,
 			   GFP_KERNEL);
@@ -215,7 +216,10 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
 	}
 
 	req->cmd_type = REQ_TYPE_SPECIAL;
-	return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+	err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+	blk_put_request(req);
+
+	return err;
 }
 
 static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index 216f9d3..effd140 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -879,7 +879,7 @@ int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca)
 	dma->device_issue_pending = ioat2_issue_pending;
 	dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
 	dma->device_free_chan_resources = ioat2_free_chan_resources;
-	dma->device_tx_status = ioat_tx_status;
+	dma->device_tx_status = ioat_dma_tx_status;
 
 	err = ioat_probe(device);
 	if (err)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index c74e4e8..2dd2c93 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2231,6 +2231,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	dev_priv->mchdev_lock = &mchdev_lock;
 	spin_unlock(&mchdev_lock);
 
+	/* XXX Prevent module unload due to memory corruption bugs. */
+	__module_get(THIS_MODULE);
+
 	return 0;
 
 out_workqueue_free:
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 56ad9df..b61966c 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -238,8 +238,8 @@ int intel_fbdev_destroy(struct drm_device *dev,
 
 	drm_framebuffer_cleanup(&ifb->base);
 	if (ifb->obj) {
-		drm_gem_object_handle_unreference(ifb->obj);
 		drm_gem_object_unreference(ifb->obj);
+		ifb->obj = NULL;
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index d204771..dbd30b2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -352,7 +352,6 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev)
 
 	if (nouveau_fb->nvbo) {
 		nouveau_bo_unmap(nouveau_fb->nvbo);
-		drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem);
 		drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem);
 		nouveau_fb->nvbo = NULL;
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 3c9964a..3ec181f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -79,7 +79,6 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan)
 	mutex_lock(&dev->struct_mutex);
 	nouveau_bo_unpin(chan->notifier_bo);
 	mutex_unlock(&dev->struct_mutex);
-	drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem);
 	drm_gem_object_unreference_unlocked(chan->notifier_bo->gem);
 	drm_mm_takedown(&chan->notifier_heap);
 }
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 79082d4..2f93d46 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1137,7 +1137,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 
 		WREG32(RCU_IND_INDEX, 0x203);
 		efuse_straps_3 = RREG32(RCU_IND_DATA);
-		efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28;
+		efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28);
 
 		switch(efuse_box_bit_127_124) {
 		case 0x0:
@@ -1407,6 +1407,7 @@ int evergreen_mc_init(struct radeon_device *rdev)
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 
@@ -1520,7 +1521,7 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev)
 {
 	u32 tmp;
 
-	WREG32(CP_INT_CNTL, 0);
+	WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
 	WREG32(GRBM_INT_CNTL, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index e151f16..e594223 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -1030,6 +1030,7 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
 		return r;
 	}
 	rdev->cp.ready = true;
+	rdev->mc.active_vram_size = rdev->mc.real_vram_size;
 	return 0;
 }
 
@@ -1047,6 +1048,7 @@ void r100_cp_fini(struct radeon_device *rdev)
 void r100_cp_disable(struct radeon_device *rdev)
 {
 	/* Disable ring */
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	rdev->cp.ready = false;
 	WREG32(RADEON_CP_CSQ_MODE, 0);
 	WREG32(RADEON_CP_CSQ_CNTL, 0);
@@ -2295,6 +2297,7 @@ void r100_vram_init_sizes(struct radeon_device *rdev)
 	/* FIXME we don't use the second aperture yet when we could use it */
 	if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
 		rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
 	if (rdev->flags & RADEON_IS_IGP) {
 		uint32_t tom;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 7a04959..7b65e4ef 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1248,6 +1248,7 @@ int r600_mc_init(struct radeon_device *rdev)
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 
 	if (rdev->flags & RADEON_IS_IGP) {
@@ -1917,6 +1918,7 @@ void r600_pciep_wreg(struct radeon_device *rdev, u32 reg, u32 v)
  */
 void r600_cp_stop(struct radeon_device *rdev)
 {
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
 }
 
@@ -2910,7 +2912,7 @@ static void r600_disable_interrupt_state(struct radeon_device *rdev)
 {
 	u32 tmp;
 
-	WREG32(CP_INT_CNTL, 0);
+	WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
 	WREG32(GRBM_INT_CNTL, 0);
 	WREG32(DxMODE_INT_MASK, 0);
 	if (ASIC_IS_DCE3(rdev)) {
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 9ceb2a1..3473c00 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -532,6 +532,7 @@ int r600_blit_init(struct radeon_device *rdev)
 	memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4);
 	radeon_bo_kunmap(rdev->r600_blit.shader_obj);
 	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+	rdev->mc.active_vram_size = rdev->mc.real_vram_size;
 	return 0;
 }
 
@@ -539,6 +540,7 @@ void r600_blit_fini(struct radeon_device *rdev)
 {
 	int r;
 
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	if (rdev->r600_blit.shader_obj == NULL)
 		return;
 	/* If we can't reserve the bo, unref should be enough to destroy
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index a168d64..9ff38c9 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -344,6 +344,7 @@ struct radeon_mc {
 	 * about vram size near mc fb location */
 	u64			mc_vram_size;
 	u64			visible_vram_size;
+	u64			active_vram_size;
 	u64			gtt_size;
 	u64			gtt_start;
 	u64			gtt_end;
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 68932ba..8e43dda 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1558,39 +1558,39 @@ radeon_atombios_get_tv_info(struct radeon_device *rdev)
 		switch (tv_info->ucTV_BootUpDefaultStandard) {
 		case ATOM_TV_NTSC:
 			tv_std = TV_STD_NTSC;
-			DRM_INFO("Default TV standard: NTSC\n");
+			DRM_DEBUG_KMS("Default TV standard: NTSC\n");
 			break;
 		case ATOM_TV_NTSCJ:
 			tv_std = TV_STD_NTSC_J;
-			DRM_INFO("Default TV standard: NTSC-J\n");
+			DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
 			break;
 		case ATOM_TV_PAL:
 			tv_std = TV_STD_PAL;
-			DRM_INFO("Default TV standard: PAL\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL\n");
 			break;
 		case ATOM_TV_PALM:
 			tv_std = TV_STD_PAL_M;
-			DRM_INFO("Default TV standard: PAL-M\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
 			break;
 		case ATOM_TV_PALN:
 			tv_std = TV_STD_PAL_N;
-			DRM_INFO("Default TV standard: PAL-N\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-N\n");
 			break;
 		case ATOM_TV_PALCN:
 			tv_std = TV_STD_PAL_CN;
-			DRM_INFO("Default TV standard: PAL-CN\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-CN\n");
 			break;
 		case ATOM_TV_PAL60:
 			tv_std = TV_STD_PAL_60;
-			DRM_INFO("Default TV standard: PAL-60\n");
+			DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
 			break;
 		case ATOM_TV_SECAM:
 			tv_std = TV_STD_SECAM;
-			DRM_INFO("Default TV standard: SECAM\n");
+			DRM_DEBUG_KMS("Default TV standard: SECAM\n");
 			break;
 		default:
 			tv_std = TV_STD_NTSC;
-			DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
+			DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n");
 			break;
 		}
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index a04b7a6..7b7ea26 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -913,47 +913,47 @@ radeon_combios_get_tv_info(struct radeon_device *rdev)
 			switch (RBIOS8(tv_info + 7) & 0xf) {
 			case 1:
 				tv_std = TV_STD_NTSC;
-				DRM_INFO("Default TV standard: NTSC\n");
+				DRM_DEBUG_KMS("Default TV standard: NTSC\n");
 				break;
 			case 2:
 				tv_std = TV_STD_PAL;
-				DRM_INFO("Default TV standard: PAL\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL\n");
 				break;
 			case 3:
 				tv_std = TV_STD_PAL_M;
-				DRM_INFO("Default TV standard: PAL-M\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
 				break;
 			case 4:
 				tv_std = TV_STD_PAL_60;
-				DRM_INFO("Default TV standard: PAL-60\n");
+				DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
 				break;
 			case 5:
 				tv_std = TV_STD_NTSC_J;
-				DRM_INFO("Default TV standard: NTSC-J\n");
+				DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
 				break;
 			case 6:
 				tv_std = TV_STD_SCART_PAL;
-				DRM_INFO("Default TV standard: SCART-PAL\n");
+				DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n");
 				break;
 			default:
 				tv_std = TV_STD_NTSC;
-				DRM_INFO
+				DRM_DEBUG_KMS
 				    ("Unknown TV standard; defaulting to NTSC\n");
 				break;
 			}
 
 			switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
 			case 0:
-				DRM_INFO("29.498928713 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n");
 				break;
 			case 1:
-				DRM_INFO("28.636360000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n");
 				break;
 			case 2:
-				DRM_INFO("14.318180000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n");
 				break;
 			case 3:
-				DRM_INFO("27.000000000 MHz TV ref clk\n");
+				DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n");
 				break;
 			default:
 				break;
@@ -1324,7 +1324,7 @@ bool radeon_legacy_get_tmds_info_from_combios(struct radeon_encoder *encoder,
 
 	if (tmds_info) {
 		ver = RBIOS8(tmds_info);
-		DRM_INFO("DFP table revision: %d\n", ver);
+		DRM_DEBUG_KMS("DFP table revision: %d\n", ver);
 		if (ver == 3) {
 			n = RBIOS8(tmds_info + 5) + 1;
 			if (n > 4)
@@ -1408,7 +1408,7 @@ bool radeon_legacy_get_ext_tmds_info_from_combios(struct radeon_encoder *encoder
 		offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
 		if (offset) {
 			ver = RBIOS8(offset);
-			DRM_INFO("External TMDS Table revision: %d\n", ver);
+			DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver);
 			tmds->slave_addr = RBIOS8(offset + 4 + 2);
 			tmds->slave_addr >>= 1; /* 7 bit addressing */
 			gpio = RBIOS8(offset + 4 + 3);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 9cdf6a3..40b0c08 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -97,7 +97,6 @@ static void radeonfb_destroy_pinned_object(struct drm_gem_object *gobj)
 		radeon_bo_unpin(rbo);
 		radeon_bo_unreserve(rbo);
 	}
-	drm_gem_object_handle_unreference(gobj);
 	drm_gem_object_unreference_unlocked(gobj);
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 0afd1e6..b3b5306 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
 	u32 c = 0;
 
 	rbo->placement.fpfn = 0;
-	rbo->placement.lpfn = 0;
+	rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
 	rbo->placement.placement = rbo->placements;
 	rbo->placement.busy_placement = rbo->placements;
 	if (domain & RADEON_GEM_DOMAIN_VRAM)
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 353998d..3481bc7 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -124,11 +124,8 @@ static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
 	int r;
 
 	r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
-	if (unlikely(r != 0)) {
-		if (r != -ERESTARTSYS)
-			dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo);
+	if (unlikely(r != 0))
 		return r;
-	}
 	spin_lock(&bo->tbo.lock);
 	if (mem_type)
 		*mem_type = bo->tbo.mem.mem_type;
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index cc05b23..51d5f7b 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -693,6 +693,7 @@ void rs600_mc_init(struct radeon_device *rdev)
 	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	base = RREG32_MC(R_000004_MC_FB_LOCATION);
 	base = G_000004_MC_FB_START(base) << 16;
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 3e3f757..4dc2a87 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -157,6 +157,7 @@ void rs690_mc_init(struct radeon_device *rdev)
 	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
 	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
 	base = G_000100_MC_FB_START(base) << 16;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index bfa59db..9490da7 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -267,6 +267,7 @@ static void rv770_mc_program(struct radeon_device *rdev)
  */
 void r700_cp_stop(struct radeon_device *rdev)
 {
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT));
 }
 
@@ -992,6 +993,7 @@ int rv770_mc_init(struct radeon_device *rdev)
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
+	rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index cb4cf7e..db809e0 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -442,6 +442,43 @@ out_err:
 }
 
 /**
+ * Call bo::reserved and with the lru lock held.
+ * Will release GPU memory type usage on destruction.
+ * This is the place to put in driver specific hooks.
+ * Will release the bo::reserved lock and the
+ * lru lock on exit.
+ */
+
+static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_global *glob = bo->glob;
+
+	if (bo->ttm) {
+
+		/**
+		 * Release the lru_lock, since we don't want to have
+		 * an atomic requirement on ttm_tt[unbind|destroy].
+		 */
+
+		spin_unlock(&glob->lru_lock);
+		ttm_tt_unbind(bo->ttm);
+		ttm_tt_destroy(bo->ttm);
+		bo->ttm = NULL;
+		spin_lock(&glob->lru_lock);
+	}
+
+	if (bo->mem.mm_node) {
+		drm_mm_put_block(bo->mem.mm_node);
+		bo->mem.mm_node = NULL;
+	}
+
+	atomic_set(&bo->reserved, 0);
+	wake_up_all(&bo->event_queue);
+	spin_unlock(&glob->lru_lock);
+}
+
+
+/**
  * If bo idle, remove from delayed- and lru lists, and unref.
  * If not idle, and already on delayed list, do nothing.
  * If not idle, and not on delayed list, put on delayed list,
@@ -456,6 +493,7 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
 	int ret;
 
 	spin_lock(&bo->lock);
+retry:
 	(void) ttm_bo_wait(bo, false, false, !remove_all);
 
 	if (!bo->sync_obj) {
@@ -464,31 +502,52 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
 		spin_unlock(&bo->lock);
 
 		spin_lock(&glob->lru_lock);
-		put_count = ttm_bo_del_from_lru(bo);
+		ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0);
+
+		/**
+		 * Someone else has the object reserved. Bail and retry.
+		 */
 
-		ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
-		BUG_ON(ret);
-		if (bo->ttm)
-			ttm_tt_unbind(bo->ttm);
+		if (unlikely(ret == -EBUSY)) {
+			spin_unlock(&glob->lru_lock);
+			spin_lock(&bo->lock);
+			goto requeue;
+		}
+
+		/**
+		 * We can re-check for sync object without taking
+		 * the bo::lock since setting the sync object requires
+		 * also bo::reserved. A busy object at this point may
+		 * be caused by another thread starting an accelerated
+		 * eviction.
+		 */
+
+		if (unlikely(bo->sync_obj)) {
+			atomic_set(&bo->reserved, 0);
+			wake_up_all(&bo->event_queue);
+			spin_unlock(&glob->lru_lock);
+			spin_lock(&bo->lock);
+			if (remove_all)
+				goto retry;
+			else
+				goto requeue;
+		}
+
+		put_count = ttm_bo_del_from_lru(bo);
 
 		if (!list_empty(&bo->ddestroy)) {
 			list_del_init(&bo->ddestroy);
 			++put_count;
 		}
-		if (bo->mem.mm_node) {
-			drm_mm_put_block(bo->mem.mm_node);
-			bo->mem.mm_node = NULL;
-		}
-		spin_unlock(&glob->lru_lock);
 
-		atomic_set(&bo->reserved, 0);
+		ttm_bo_cleanup_memtype_use(bo);
 
 		while (put_count--)
 			kref_put(&bo->list_kref, ttm_bo_ref_bug);
 
 		return 0;
 	}
-
+requeue:
 	spin_lock(&glob->lru_lock);
 	if (list_empty(&bo->ddestroy)) {
 		void *sync_obj = bo->sync_obj;
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index f7bd261..f2de3be 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -677,6 +677,11 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev,
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
+	/*
+	 * register OF I2C devices
+	 */
+	of_i2c_register_devices(&cpm->adap);
+
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 43ca32f..89eedf4 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -761,6 +761,9 @@ static int __devinit iic_probe(struct platform_device *ofdev,
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
+	/* Now register all the child nodes */
+	of_i2c_register_devices(adap);
+
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a1c419a..b74e6dc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -632,6 +632,7 @@ static int __devinit fsl_i2c_probe(struct platform_device *op,
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
+	of_i2c_register_devices(&i2c->adap);
 
 	return result;
 
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index bbd7760..29933f8 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -71,8 +71,8 @@ static int pca_isa_readbyte(void *pd, int reg)
 
 static int pca_isa_waitforcompletion(void *pd)
 {
-	long ret = ~0;
 	unsigned long timeout;
+	long ret;
 
 	if (irq > -1) {
 		ret = wait_event_timeout(pca_wait,
@@ -81,11 +81,15 @@ static int pca_isa_waitforcompletion(void *pd)
 	} else {
 		/* Do polling */
 		timeout = jiffies + pca_isa_ops.timeout;
-		while (((pca_isa_readbyte(pd, I2C_PCA_CON)
-				& I2C_PCA_CON_SI) == 0)
-				&& (ret = time_before(jiffies, timeout)))
+		do {
+			ret = time_before(jiffies, timeout);
+			if (pca_isa_readbyte(pd, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
 			udelay(100);
+		} while (ret);
 	}
+
 	return ret > 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index ef5c784..5f6d7f8 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -80,8 +80,8 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
 static int i2c_pca_pf_waitforcompletion(void *pd)
 {
 	struct i2c_pca_pf_data *i2c = pd;
-	long ret = ~0;
 	unsigned long timeout;
+	long ret;
 
 	if (i2c->irq) {
 		ret = wait_event_timeout(i2c->wait,
@@ -90,10 +90,13 @@ static int i2c_pca_pf_waitforcompletion(void *pd)
 	} else {
 		/* Do polling */
 		timeout = jiffies + i2c->adap.timeout;
-		while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
-				& I2C_PCA_CON_SI) == 0)
-				&& (ret = time_before(jiffies, timeout)))
+		do {
+			ret = time_before(jiffies, timeout);
+			if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+					& I2C_PCA_CON_SI)
+				break;
 			udelay(100);
+		} while (ret);
 	}
 
 	return ret > 0;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 6649176..bea4c50 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -32,7 +32,6 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
@@ -197,11 +196,12 @@ static int i2c_device_pm_suspend(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->suspend ? pm->suspend(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->suspend ? pm->suspend(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_SUSPEND);
 }
@@ -216,12 +216,6 @@ static int i2c_device_pm_resume(struct device *dev)
 	else
 		ret = i2c_legacy_resume(dev);
 
-	if (!ret) {
-		pm_runtime_disable(dev);
-		pm_runtime_set_active(dev);
-		pm_runtime_enable(dev);
-	}
-
 	return ret;
 }
 
@@ -229,11 +223,12 @@ static int i2c_device_pm_freeze(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->freeze ? pm->freeze(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->freeze ? pm->freeze(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_FREEZE);
 }
@@ -242,11 +237,12 @@ static int i2c_device_pm_thaw(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->thaw ? pm->thaw(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->thaw ? pm->thaw(dev) : 0;
+	}
 
 	return i2c_legacy_resume(dev);
 }
@@ -255,11 +251,12 @@ static int i2c_device_pm_poweroff(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm_runtime_suspended(dev))
-		return 0;
-
-	if (pm)
-		return pm->poweroff ? pm->poweroff(dev) : 0;
+	if (pm) {
+		if (pm_runtime_suspended(dev))
+			return 0;
+		else
+			return pm->poweroff ? pm->poweroff(dev) : 0;
+	}
 
 	return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
 }
@@ -876,9 +873,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
-	/* Register devices from the device tree */
-	of_i2c_register_devices(adap);
-
 	/* Notify drivers */
 	mutex_lock(&core_lock);
 	bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 0906fc5..c37ef64 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -157,13 +157,13 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
 	{ /* MWAIT C5 */ },
 	{ /* MWAIT C6 */
 		.name = "ATM-C6",
-		.desc = "MWAIT 0x40",
-		.driver_data = (void *) 0x40,
+		.desc = "MWAIT 0x52",
+		.driver_data = (void *) 0x52,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
-		.exit_latency = 200,
+		.exit_latency = 140,
 		.power_usage = 150,
-		.target_residency = 800,
-		.enter = NULL },	/* disabled */
+		.target_residency = 560,
+		.enter = &intel_idle },
 };
 
 /**
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index d85bd8a..22239e9 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -483,6 +483,9 @@ static int joydev_handle_JSIOCSAXMAP(struct joydev *joydev,
 
 	memcpy(joydev->abspam, abspam, len);
 
+	for (i = 0; i < joydev->nabs; i++)
+		joydev->absmap[joydev->abspam[i]] = i;
+
  out:
 	kfree(abspam);
 	return retval;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 0d4266a..3606985 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -404,6 +404,13 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 		retval = uinput_validate_absbits(dev);
 		if (retval < 0)
 			goto exit;
+		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
+			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
+			input_mt_create_slots(dev, nslot);
+			input_set_events_per_packet(dev, 6 * nslot);
+		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+			input_set_events_per_packet(dev, 60);
+		}
 	}
 
 	udev->state = UIST_SETUP_COMPLETE;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 42ba369..b35876e 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -103,27 +103,26 @@ static void wacom_sys_irq(struct urb *urb)
 static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
+	int retval = 0;
 
-	mutex_lock(&wacom->lock);
-
-	wacom->irq->dev = wacom->usbdev;
-
-	if (usb_autopm_get_interface(wacom->intf) < 0) {
-		mutex_unlock(&wacom->lock);
+	if (usb_autopm_get_interface(wacom->intf) < 0)
 		return -EIO;
-	}
+
+	mutex_lock(&wacom->lock);
 
 	if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
-		usb_autopm_put_interface(wacom->intf);
-		mutex_unlock(&wacom->lock);
-		return -EIO;
+		retval = -EIO;
+		goto out;
 	}
 
 	wacom->open = true;
 	wacom->intf->needs_remote_wakeup = 1;
 
+out:
 	mutex_unlock(&wacom->lock);
-	return 0;
+	if (retval)
+		usb_autopm_put_interface(wacom->intf);
+	return retval;
 }
 
 static void wacom_close(struct input_dev *dev)
@@ -135,6 +134,8 @@ static void wacom_close(struct input_dev *dev)
 	wacom->open = false;
 	wacom->intf->needs_remote_wakeup = 0;
 	mutex_unlock(&wacom->lock);
+
+	usb_autopm_put_interface(wacom->intf);
 }
 
 static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 6e29bad..47fd7a0 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -442,8 +442,10 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
 	/* general pen packet */
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
-		if (features->type >= INTUOS4S && features->type <= INTUOS4L)
+		if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+		    features->type == WACOM_21UX2) {
 			t = (t << 1) | (data[1] & 1);
+		}
 		input_report_abs(input, ABS_PRESSURE, t);
 		input_report_abs(input, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c
index 485be8b..f0225bc 100644
--- a/drivers/isdn/sc/interrupt.c
+++ b/drivers/isdn/sc/interrupt.c
@@ -112,11 +112,19 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst)
 			}
 			else if(callid>=0x0000 && callid<=0x7FFF)
 			{
+				int len;
+
 				pr_debug("%s: Got Incoming Call\n",
 						sc_adapter[card]->devicename);
-				strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
-				strcpy(setup.eazmsn,
-					sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
+				len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
+						sizeof(setup.phone));
+				if (len >= sizeof(setup.phone))
+					continue;
+				len = strlcpy(setup.eazmsn,
+						sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+						sizeof(setup.eazmsn));
+				if (len >= sizeof(setup.eazmsn))
+					continue;
 				setup.si1 = 7;
 				setup.si2 = 0;
 				setup.plan = 0;
@@ -176,7 +184,9 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst)
 		 * Handle a GetMyNumber Rsp
 		 */
 		if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
-			strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
+			strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+				rcvmsg.msg_data.byte_array,
+				sizeof(rcvmsg.msg_data.byte_array));
 			continue;
 		}
 			
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ed4900a..e4fb58d 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1000,10 +1000,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 				page = bitmap->sb_page;
 				offset = sizeof(bitmap_super_t);
 				if (!file)
-					read_sb_page(bitmap->mddev,
-						     bitmap->mddev->bitmap_info.offset,
-						     page,
-						     index, count);
+					page = read_sb_page(
+						bitmap->mddev,
+						bitmap->mddev->bitmap_info.offset,
+						page,
+						index, count);
 			} else if (file) {
 				page = read_page(file, index, bitmap, count);
 				offset = 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index ad83a4d..0b830bb 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1839,7 +1839,9 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 
 		/* take from bio_init */
 		bio->bi_next = NULL;
+		bio->bi_flags &= ~(BIO_POOL_MASK-1);
 		bio->bi_flags |= 1 << BIO_UPTODATE;
+		bio->bi_comp_cpu = -1;
 		bio->bi_rw = READ;
 		bio->bi_vcnt = 0;
 		bio->bi_idx = 0;
@@ -1912,7 +1914,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 			    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
 				break;
 			BUG_ON(sync_blocks < (PAGE_SIZE>>9));
-			if (len > (sync_blocks<<9))
+			if ((len >> 9) > sync_blocks)
 				len = sync_blocks<<9;
 		}
 
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 7e82a9d..7961d59 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -319,7 +319,7 @@ static void ir_timer_keyup(unsigned long cookie)
 	 * a keyup event might follow immediately after the keydown.
 	 */
 	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_after_eq_jiffies(ir->keyup_jiffies))
+	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
 		ir_keyup(ir);
 	spin_unlock_irqrestore(&ir->keylock, flags);
 }
@@ -510,6 +510,13 @@ int __ir_input_register(struct input_dev *input_dev,
 		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
 			" in raw mode" : "");
 
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes.
+	 */
+	input_dev->rep[REP_DELAY] = 500;
+
 	return 0;
 
 out_event:
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
index 77b5946..e63f757 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/IR/ir-lirc-codec.c
@@ -267,7 +267,7 @@ static int ir_lirc_register(struct input_dev *input_dev)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
 
 		if (ir_dev->props->s_tx_duty_cycle)
-			features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
+			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
 	}
 
 	if (ir_dev->props->s_rx_carrier_range)
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 43094e7..8e0e1b1 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -279,9 +279,11 @@ int ir_raw_event_register(struct input_dev *input_dev)
 			"rc%u",  (unsigned int)ir->devno);
 
 	if (IS_ERR(ir->raw->thread)) {
+		int ret = PTR_ERR(ir->raw->thread);
+
 		kfree(ir->raw);
 		ir->raw = NULL;
-		return PTR_ERR(ir->raw->thread);
+		return ret;
 	}
 
 	mutex_lock(&ir_raw_handler_lock);
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index 96dafc4..46d4246 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -67,13 +67,14 @@ static ssize_t show_protocols(struct device *d,
 	char *tmp = buf;
 	int i;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
 		enabled = ir_dev->rc_tab.ir_type;
 		allowed = ir_dev->props->allowed_protos;
-	} else {
+	} else if (ir_dev->raw) {
 		enabled = ir_dev->raw->enabled_protocols;
 		allowed = ir_raw_get_allowed_protocols();
-	}
+	} else
+		return sprintf(tmp, "[builtin]\n");
 
 	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
 		   (long long)allowed,
@@ -121,10 +122,14 @@ static ssize_t store_protocols(struct device *d,
 	int rc, i, count = 0;
 	unsigned long flags;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
 		type = ir_dev->rc_tab.ir_type;
-	else
+	else if (ir_dev->raw)
 		type = ir_dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
 
 	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
 		if (!*tmp)
@@ -185,7 +190,7 @@ static ssize_t store_protocols(struct device *d,
 		}
 	}
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
 		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
 		ir_dev->rc_tab.ir_type = type;
 		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c
index 64264f7..39557ad 100644
--- a/drivers/media/IR/keymaps/rc-rc6-mce.c
+++ b/drivers/media/IR/keymaps/rc-rc6-mce.c
@@ -19,6 +19,7 @@ static struct ir_scancode rc6_mce[] = {
 
 	{ 0x800f0416, KEY_PLAY },
 	{ 0x800f0418, KEY_PAUSE },
+	{ 0x800f046e, KEY_PLAYPAUSE },
 	{ 0x800f0419, KEY_STOP },
 	{ 0x800f0417, KEY_RECORD },
 
@@ -37,6 +38,8 @@ static struct ir_scancode rc6_mce[] = {
 	{ 0x800f0411, KEY_VOLUMEDOWN },
 	{ 0x800f0412, KEY_CHANNELUP },
 	{ 0x800f0413, KEY_CHANNELDOWN },
+	{ 0x800f043a, KEY_BRIGHTNESSUP },
+	{ 0x800f0480, KEY_BRIGHTNESSDOWN },
 
 	{ 0x800f0401, KEY_NUMERIC_1 },
 	{ 0x800f0402, KEY_NUMERIC_2 },
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index ac6bb2c..bc620e1 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -120,6 +120,10 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
 	/* Philips eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
 	/* Realtek MCE IR Receiver */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
 	/* SMK/Toshiba G83C0004D410 */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index fe81834..48397f1 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -673,9 +673,6 @@ static int dib0700_probe(struct usb_interface *intf,
 			else
 				dev->props.rc.core.bulk_mode = false;
 
-			/* Need a higher delay, to avoid wrong repeat */
-			dev->rc_input_dev->rep[REP_DELAY] = 500;
-
 			dib0700_rc_setup(dev);
 
 			return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f634d2e..e06acd1 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -940,6 +940,58 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.enable_current_mirror = 1,
+	.disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7770p_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&dib7770p_dib7000p_config);
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
 /* DIB807x generic */
 static struct dibx000_agc_config dib807x_agc_config[2] = {
 	{
@@ -1781,7 +1833,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
-	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+	{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
 	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
@@ -2406,7 +2458,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				.pid_filter_count = 32,
 				.pid_filter       = stk70x0p_pid_filter,
 				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070p_frontend_attach,
+				.frontend_attach  = stk7770p_frontend_attach,
 				.tuner_attach     = dib7770p_tuner_attach,
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index 6b22ec6..f896337 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -483,9 +483,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
 		}
 	}
 	kfree(p);
-	if (fw) {
-		release_firmware(fw);
-	}
+	release_firmware(fw);
 	return ret;
 }
 
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 2e28b97..3aed0d4 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -260,6 +260,9 @@ static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_ad
 
 //	dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
 
+	reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
+	reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
 	dib7000p_write_word(state, 908, reg_908);
 	dib7000p_write_word(state, 909, reg_909);
 }
@@ -778,7 +781,10 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 		default:
 		case GUARD_INTERVAL_1_32: value *= 1; break;
 	}
-	state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
+	if (state->cfg.diversity_delay == 0)
+		state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
+	else
+		state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
 
 	/* deactive the possibility of diversity reception if extended interleaver */
 	state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 805dd13..da17345 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -33,6 +33,11 @@ struct dib7000p_config {
 	int (*agc_control) (struct dvb_frontend *, u8 before);
 
 	u8 output_mode;
+	u8 disable_sample_and_hold : 1;
+
+	u8 enable_current_mirror : 1;
+	u8 diversity_delay;
+
 };
 
 #define DEFAULT_DIB7000P_I2C_ADDRESS 18
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index d93468c..ff3b0fa 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1098,33 +1098,26 @@ EXPORT_SYMBOL_GPL(smscore_onresponse);
  *
  * @return pointer to descriptor on success, NULL on error.
  */
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+
+struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
 {
 	struct smscore_buffer_t *cb = NULL;
 	unsigned long flags;
 
-	DEFINE_WAIT(wait);
-
 	spin_lock_irqsave(&coredev->bufferslock, flags);
-
-	/* This function must return a valid buffer, since the buffer list is
-	 * finite, we check that there is an available buffer, if not, we wait
-	 * until such buffer become available.
-	 */
-
-	prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
-	if (list_empty(&coredev->buffers)) {
-		spin_unlock_irqrestore(&coredev->bufferslock, flags);
-		schedule();
-		spin_lock_irqsave(&coredev->bufferslock, flags);
+	if (!list_empty(&coredev->buffers)) {
+		cb = (struct smscore_buffer_t *) coredev->buffers.next;
+		list_del(&cb->entry);
 	}
+	spin_unlock_irqrestore(&coredev->bufferslock, flags);
+	return cb;
+}
 
-	finish_wait(&coredev->buffer_mng_waitq, &wait);
-
-	cb = (struct smscore_buffer_t *) coredev->buffers.next;
-	list_del(&cb->entry);
+struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+{
+	struct smscore_buffer_t *cb = NULL;
 
-	spin_unlock_irqrestore(&coredev->bufferslock, flags);
+	wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
 
 	return cb;
 }
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index 67a4ec8..4ce541a 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -395,7 +395,7 @@ static int __devinit si470x_i2c_probe(struct i2c_client *client,
 	radio->registers[POWERCFG] = POWERCFG_ENABLE;
 	if (si470x_set_register(radio, POWERCFG) < 0) {
 		retval = -EIO;
-		goto err_all;
+		goto err_video;
 	}
 	msleep(110);
 
diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile
index 755dd0c..6f2b573 100644
--- a/drivers/media/video/cx231xx/Makefile
+++ b/drivers/media/video/cx231xx/Makefile
@@ -11,4 +11,5 @@ EXTRA_CFLAGS += -Idrivers/media/video
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
 
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 6bdc0ef..f2a4900 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -32,6 +32,7 @@
 #include <media/v4l2-chip-ident.h>
 
 #include <media/cx25840.h>
+#include "dvb-usb-ids.h"
 #include "xc5000.h"
 
 #include "cx231xx.h"
@@ -175,6 +176,8 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_CNXT_RDE_250},
 	{USB_DEVICE(0x0572, 0x58A1),
 	 .driver_info = CX231XX_BOARD_CNXT_RDU_250},
+	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
+	 .driver_info = CX231XX_BOARD_UNKNOWN},
 	{},
 };
 
@@ -226,14 +229,16 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
 		     dev->board.name, dev->model);
 
 	/* set the direction for GPIO pins */
-	cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
-	cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
-	cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
+	if (dev->board.tuner_gpio) {
+		cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
+		cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
+		cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
 
-	/* request some modules if any required */
+		/* request some modules if any required */
 
-	/* reset the Tuner */
-	cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+		/* reset the Tuner */
+		cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+	}
 
 	/* set the mode to Analog mode initially */
 	cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 86ca8c2..f5a3e74 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1996,7 +1996,7 @@ static int cx25840_probe(struct i2c_client *client,
 
 		state->volume = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
-			0, 65335, 65535 / 100, default_volume);
+			0, 65535, 65535 / 100, default_volume);
 		state->mute = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
 			0, 1, 1, 0);
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 99dbae1..0fa85cb 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -17,7 +17,7 @@ config VIDEO_CX88
 
 config VIDEO_CX88_ALSA
 	tristate "Conexant 2388x DMA audio support"
-	depends on VIDEO_CX88 && SND && EXPERIMENTAL
+	depends on VIDEO_CX88 && SND
 	select SND_PCM
 	---help---
 	  This is a video4linux driver for direct (DMA) audio on
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index b984610..78abc1c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -223,6 +223,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 		usb_rcvintpipe(dev, ep->bEndpointAddress),
 		buffer, buffer_len,
 		int_irq, (void *)gspca_dev, interval);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	gspca_dev->int_urb = urb;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 83a718f..9052d57 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2357,8 +2357,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			    (data[33] << 10);
 		avg_lum >>= 9;
 		atomic_set(&sd->avg_lum, avg_lum);
-		gspca_frame_add(gspca_dev, LAST_PACKET,
-				data, len);
+		gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 		return;
 	}
 	if (gspca_dev->last_packet_type == LAST_PACKET) {
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index be03a71..f0316d0 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -466,6 +466,8 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar
 			struct fb_vblank vblank;
 			u32 trace;
 
+			memset(&vblank, 0, sizeof(struct fb_vblank));
+
 			vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
 					FB_VBLANK_HAVE_VSYNC;
 			trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 4525335..a7210d9 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -239,7 +239,7 @@ static int device_process(struct m2mtest_ctx *ctx,
 		return -EFAULT;
 	}
 
-	if (in_buf->vb.size < out_buf->vb.size) {
+	if (in_buf->vb.size > out_buf->vb.size) {
 		v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n");
 		return -EINVAL;
 	}
@@ -1014,6 +1014,7 @@ static int m2mtest_remove(struct platform_device *pdev)
 	v4l2_m2m_release(dev->m2m_dev);
 	del_timer_sync(&dev->timer);
 	video_unregister_device(dev->vfd);
+	video_device_release(dev->vfd);
 	v4l2_device_unregister(&dev->v4l2_dev);
 	kfree(dev);
 
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 758a4db..c71af4e 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -447,6 +447,9 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
 		__func__, rect.left, rect.top, rect.width, rect.height);
 
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
 	ret = mt9m111_make_rect(client, &rect);
 	if (!ret)
 		mt9m111->rect = rect;
@@ -466,12 +469,14 @@ static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 
 static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
 	a->bounds.left			= MT9M111_MIN_DARK_COLS;
 	a->bounds.top			= MT9M111_MIN_DARK_ROWS;
 	a->bounds.width			= MT9M111_MAX_WIDTH;
 	a->bounds.height		= MT9M111_MAX_HEIGHT;
 	a->defrect			= a->bounds;
-	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
 	a->pixelaspect.denominator	= 1;
 
@@ -487,6 +492,7 @@ static int mt9m111_g_fmt(struct v4l2_subdev *sd,
 	mf->width	= mt9m111->rect.width;
 	mf->height	= mt9m111->rect.height;
 	mf->code	= mt9m111->fmt->code;
+	mf->colorspace	= mt9m111->fmt->colorspace;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index e7cd23c..b48473c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -402,9 +402,6 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd,
 		if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
 			return -EINVAL;
 		break;
-	case 0:
-		/* No format change, only geometry */
-		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 66ff174..b6ea672 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -378,6 +378,9 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
 
 	spin_lock_irqsave(&pcdev->lock, flags);
 
+	if (*fb_active == NULL)
+		goto out;
+
 	vb = &(*fb_active)->vb;
 	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -402,6 +405,7 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
 
 	*fb_active = buf;
 
+out:
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 1b992b8..55ea914 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -513,7 +513,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr,
 			if (ret >= 0) {
 				ret = pvr2_ctrl_range_check(cptr,*valptr);
 			}
-			if (maskptr) *maskptr = ~0;
+			*maskptr = ~0;
 		} else if (cptr->info->type == pvr2_ctl_bool) {
 			ret = parse_token(ptr,len,valptr,boolNames,
 					  ARRAY_SIZE(boolNames));
@@ -522,7 +522,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr,
 			} else if (ret == 0) {
 				*valptr = (*valptr & 1) ? !0 : 0;
 			}
-			if (maskptr) *maskptr = 1;
+			*maskptr = 1;
 		} else if (cptr->info->type == pvr2_ctl_enum) {
 			ret = parse_token(
 				ptr,len,valptr,
@@ -531,7 +531,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr,
 			if (ret >= 0) {
 				ret = pvr2_ctrl_range_check(cptr,*valptr);
 			}
-			if (maskptr) *maskptr = ~0;
+			*maskptr = ~0;
 		} else if (cptr->info->type == pvr2_ctl_bitmask) {
 			ret = parse_tlist(
 				ptr,len,maskptr,valptr,
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index b151c7b..6961c55 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -393,6 +393,37 @@ static void fimc_set_yuv_order(struct fimc_ctx *ctx)
 	dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
 }
 
+static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+{
+	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+
+	f->dma_offset.y_h = f->offs_h;
+	if (!variant->pix_hoff)
+		f->dma_offset.y_h *= (f->fmt->depth >> 3);
+
+	f->dma_offset.y_v = f->offs_v;
+
+	f->dma_offset.cb_h = f->offs_h;
+	f->dma_offset.cb_v = f->offs_v;
+
+	f->dma_offset.cr_h = f->offs_h;
+	f->dma_offset.cr_v = f->offs_v;
+
+	if (!variant->pix_hoff) {
+		if (f->fmt->planes_cnt == 3) {
+			f->dma_offset.cb_h >>= 1;
+			f->dma_offset.cr_h >>= 1;
+		}
+		if (f->fmt->color == S5P_FIMC_YCBCR420) {
+			f->dma_offset.cb_v >>= 1;
+			f->dma_offset.cr_v >>= 1;
+		}
+	}
+
+	dbg("in_offset: color= %d, y_h= %d, y_v= %d",
+	    f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v);
+}
+
 /**
  * fimc_prepare_config - check dimensions, operation and color mode
  *			 and pre-calculate offset and the scaling coefficients.
@@ -406,7 +437,6 @@ static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags)
 {
 	struct fimc_frame *s_frame, *d_frame;
 	struct fimc_vid_buffer *buf = NULL;
-	struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
 	int ret = 0;
 
 	s_frame = &ctx->s_frame;
@@ -419,61 +449,16 @@ static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags)
 			swap(d_frame->width, d_frame->height);
 		}
 
-		/* Prepare the output offset ratios for scaler. */
-		d_frame->dma_offset.y_h = d_frame->offs_h;
-		if (!variant->pix_hoff)
-			d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
-
-		d_frame->dma_offset.y_v = d_frame->offs_v;
-
-		d_frame->dma_offset.cb_h = d_frame->offs_h;
-		d_frame->dma_offset.cb_v = d_frame->offs_v;
-
-		d_frame->dma_offset.cr_h = d_frame->offs_h;
-		d_frame->dma_offset.cr_v = d_frame->offs_v;
+		/* Prepare the DMA offset ratios for scaler. */
+		fimc_prepare_dma_offset(ctx, &ctx->s_frame);
+		fimc_prepare_dma_offset(ctx, &ctx->d_frame);
 
-		if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
-			d_frame->dma_offset.cb_h >>= 1;
-			d_frame->dma_offset.cb_v >>= 1;
-			d_frame->dma_offset.cr_h >>= 1;
-			d_frame->dma_offset.cr_v >>= 1;
-		}
-
-		dbg("out offset: color= %d, y_h= %d, y_v= %d",
-			d_frame->fmt->color,
-			d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
-
-		/* Prepare the input offset ratios for scaler. */
-		s_frame->dma_offset.y_h = s_frame->offs_h;
-		if (!variant->pix_hoff)
-			s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
-		s_frame->dma_offset.y_v = s_frame->offs_v;
-
-		s_frame->dma_offset.cb_h = s_frame->offs_h;
-		s_frame->dma_offset.cb_v = s_frame->offs_v;
-
-		s_frame->dma_offset.cr_h = s_frame->offs_h;
-		s_frame->dma_offset.cr_v = s_frame->offs_v;
-
-		if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
-			s_frame->dma_offset.cb_h >>= 1;
-			s_frame->dma_offset.cb_v >>= 1;
-			s_frame->dma_offset.cr_h >>= 1;
-			s_frame->dma_offset.cr_v >>= 1;
-		}
-
-		dbg("in offset: color= %d, y_h= %d, y_v= %d",
-			s_frame->fmt->color, s_frame->dma_offset.y_h,
-			s_frame->dma_offset.y_v);
-
-		fimc_set_yuv_order(ctx);
-
-		/* Check against the scaler ratio. */
 		if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
 		    s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
 			err("out of scaler range");
 			return -EINVAL;
 		}
+		fimc_set_yuv_order(ctx);
 	}
 
 	/* Input DMA mode is not allowed when the scaler is disabled. */
@@ -822,7 +807,8 @@ static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	} else {
 		v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
 			 "Wrong buffer/video queue type (%d)\n", f->type);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto s_fmt_out;
 	}
 
 	pix = &f->fmt.pix;
@@ -1414,8 +1400,10 @@ static int fimc_probe(struct platform_device *pdev)
 	}
 
 	fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
-	if (!fimc->work_queue)
+	if (!fimc->work_queue) {
+		ret = -ENOMEM;
 		goto err_irq;
+	}
 
 	ret = fimc_register_m2m_device(fimc);
 	if (ret)
@@ -1492,6 +1480,7 @@ static struct samsung_fimc_variant fimc2_variant_s5p = {
 };
 
 static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+	.pix_hoff	= 1,
 	.has_inp_rot	= 1,
 	.has_out_rot	= 1,
 	.min_inp_pixsize = 16,
@@ -1506,6 +1495,7 @@ static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
 };
 
 static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+	.pix_hoff	 = 1,
 	.min_inp_pixsize = 16,
 	.min_out_pixsize = 32,
 
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index ec697fc..bb8d83d 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4323,13 +4323,13 @@ struct saa7134_board saa7134_boards[] = {
 	},
 	[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
 		/*       Beholder Intl. Ltd. 2008      */
-		/*Dmitry Belimov <d.belimov@gmail.com> */
-		.name           = "Beholder BeholdTV Columbus TVFM",
+		/* Dmitry Belimov <d.belimov@gmail.com> */
+		.name           = "Beholder BeholdTV Columbus TV/FM",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_ALPS_TSBE5_PAL,
-		.radio_type     = UNSET,
-		.tuner_addr     = ADDR_UNSET,
-		.radio_addr     = ADDR_UNSET,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr     = 0xc2 >> 1,
+		.radio_addr     = 0xc0 >> 1,
 		.tda9887_conf   = TDA9887_PRESENT,
 		.gpiomask       = 0x000A8004,
 		.inputs         = {{
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 5713f3a..ddd25d3 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -136,10 +136,11 @@ ret:
 int saa7164_buffer_dealloc(struct saa7164_tsport *port,
 	struct saa7164_buffer *buf)
 {
-	struct saa7164_dev *dev = port->dev;
+	struct saa7164_dev *dev;
 
-	if ((buf == 0) || (port == 0))
+	if (!buf || !port)
 		return SAA_ERR_BAD_PARAMETER;
+	dev = port->dev;
 
 	dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 8bdd940..2ac85d8 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -486,6 +486,12 @@ static int uvc_parse_format(struct uvc_device *dev,
 			    max(frame->dwFrameInterval[0],
 				frame->dwDefaultFrameInterval));
 
+		if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) {
+			frame->bFrameIntervalType = 1;
+			frame->dwFrameInterval[0] =
+				frame->dwDefaultFrameInterval;
+		}
+
 		uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
 			frame->wWidth, frame->wHeight,
 			10000000/frame->dwDefaultFrameInterval,
@@ -2026,6 +2032,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceClass	= USB_CLASS_VENDOR_SPEC,
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0 },
+	/* Chicony CNF7129 (Asus EEE 100HE) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x04f2,
+	  .idProduct		= 0xb071,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_RESTRICT_FRAME_RATE },
 	/* Alcor Micro AU3820 (Future Boy PC USB Webcam) */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -2091,6 +2106,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_PROBE_DEF },
+	/* IMC Networks (Medion Akoya) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x13d3,
+	  .idProduct		= 0x5103,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
 	/* Syntek (HP Spartan) */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index bdacf3b..892e0e5 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -182,6 +182,7 @@ struct uvc_xu_control {
 #define UVC_QUIRK_IGNORE_SELECTOR_UNIT	0x00000020
 #define UVC_QUIRK_FIX_BANDWIDTH		0x00000080
 #define UVC_QUIRK_PROBE_DEF		0x00000100
+#define UVC_QUIRK_RESTRICT_FRAME_RATE	0x00000200
 
 /* Format flags */
 #define UVC_FMT_FLAG_COMPRESSED		0x00000001
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 372b87e..6ff9e4b 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -393,8 +393,10 @@ void videobuf_dma_contig_free(struct videobuf_queue *q,
 	}
 
 	/* read() method */
-	dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
-	mem->vaddr = NULL;
+	if (mem->vaddr) {
+		dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
+		mem->vaddr = NULL;
+	}
 }
 EXPORT_SYMBOL_GPL(videobuf_dma_contig_free);
 
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 06f9a9c..2ad0bc2 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -94,7 +94,7 @@ err:
  * must free the memory.
  */
 static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
-						int nr_pages, int offset)
+					int nr_pages, int offset, size_t size)
 {
 	struct scatterlist *sglist;
 	int i;
@@ -110,12 +110,14 @@ static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
 		/* DMA to highmem pages might not work */
 		goto highmem;
 	sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
+	size -= PAGE_SIZE - offset;
 	for (i = 1; i < nr_pages; i++) {
 		if (NULL == pages[i])
 			goto nopage;
 		if (PageHighMem(pages[i]))
 			goto highmem;
-		sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
+		sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0);
+		size -= min(PAGE_SIZE, size);
 	}
 	return sglist;
 
@@ -170,7 +172,8 @@ static int videobuf_dma_init_user_locked(struct videobuf_dmabuf *dma,
 
 	first = (data          & PAGE_MASK) >> PAGE_SHIFT;
 	last  = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
-	dma->offset   = data & ~PAGE_MASK;
+	dma->offset = data & ~PAGE_MASK;
+	dma->size = size;
 	dma->nr_pages = last-first+1;
 	dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL);
 	if (NULL == dma->pages)
@@ -252,7 +255,7 @@ int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma)
 
 	if (dma->pages) {
 		dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
-						   dma->offset);
+						   dma->offset, dma->size);
 	}
 	if (dma->vaddr) {
 		dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 714c6b4..d5f3a3f 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -190,7 +190,6 @@ static int __devexit bh1780_remove(struct i2c_client *client)
 
 	ddata = i2c_get_clientdata(client);
 	sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
-	i2c_set_clientdata(client, NULL);
 	kfree(ddata);
 
 	return 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1c767ad..77efe46 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2431,7 +2431,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on MV64X60 || PPC32 || PLAT_ORION
+	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
 	select INET_LRO
 	select PHYLIB
 	help
@@ -2806,7 +2806,7 @@ config NIU
 
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC_PASEMI && PCI
+	depends on PPC_PASEMI && PCI && INET
 	select PHYLIB
 	select INET_LRO
 	help
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 1e620e2..efeffdf 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2170,8 +2170,6 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	dev->irq = sdev->irq;
 	SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
 
-	netif_carrier_off(dev);
-
 	err = ssb_bus_powerup(sdev->bus, 0);
 	if (err) {
 		dev_err(sdev->dev,
@@ -2213,6 +2211,8 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 		goto err_out_powerdown;
 	}
 
+	netif_carrier_off(dev);
+
 	ssb_set_drvdata(sdev, dev);
 
 	/* Chip reset provides power to the b44 MAC & PCI cores, which
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3b16f62..e953c6a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -5164,6 +5164,15 @@ int bond_create(struct net *net, const char *name)
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
 			goto out;
+	} else {
+		/*
+		 * If we're given a name to register
+		 * we need to ensure that its not already
+		 * registered
+		 */
+		res = -EEXIST;
+		if (__dev_get_by_name(net, name) != NULL)
+			goto out;
 	}
 
 	res = register_netdevice(bond_dev);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index a333b42..6372610 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -533,8 +533,15 @@ static inline void ehea_fill_skb(struct net_device *dev,
 	int length = cqe->num_bytes_transfered - 4;	/*remove CRC */
 
 	skb_put(skb, length);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	skb->protocol = eth_type_trans(skb, dev);
+
+	/* The packet was not an IPV4 packet so a complemented checksum was
+	   calculated. The value is found in the Internet Checksum field. */
+	if (cqe->status & EHEA_CQE_BLIND_CKSUM) {
+		skb->ip_summed = CHECKSUM_COMPLETE;
+		skb->csum = csum_unfold(~cqe->inet_checksum_value);
+	} else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 }
 
 static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index f608a6c..3810473 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h
@@ -150,6 +150,7 @@ struct ehea_rwqe {
 #define EHEA_CQE_TYPE_RQ           0x60
 #define EHEA_CQE_STAT_ERR_MASK     0x700F
 #define EHEA_CQE_STAT_FAT_ERR_MASK 0xF
+#define EHEA_CQE_BLIND_CKSUM       0x8000
 #define EHEA_CQE_STAT_ERR_TCP      0x4000
 #define EHEA_CQE_STAT_ERR_IP       0x2000
 #define EHEA_CQE_STAT_ERR_CRC      0x1000
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 768b840..cce32d4 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -678,24 +678,37 @@ static int fec_enet_mii_probe(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct phy_device *phy_dev = NULL;
-	int ret;
+	char mdio_bus_id[MII_BUS_ID_SIZE];
+	char phy_name[MII_BUS_ID_SIZE + 3];
+	int phy_id;
 
 	fep->phy_dev = NULL;
 
-	/* find the first phy */
-	phy_dev = phy_find_first(fep->mii_bus);
-	if (!phy_dev) {
-		printk(KERN_ERR "%s: no PHY found\n", dev->name);
-		return -ENODEV;
+	/* check for attached phy */
+	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+		if ((fep->mii_bus->phy_mask & (1 << phy_id)))
+			continue;
+		if (fep->mii_bus->phy_map[phy_id] == NULL)
+			continue;
+		if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
+			continue;
+		strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
+		break;
 	}
 
-	/* attach the mac to the phy */
-	ret = phy_connect_direct(dev, phy_dev,
-			     &fec_enet_adjust_link, 0,
-			     PHY_INTERFACE_MODE_MII);
-	if (ret) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return ret;
+	if (phy_id >= PHY_MAX_ADDR) {
+		printk(KERN_INFO "%s: no PHY, assuming direct connection "
+			"to switch\n", dev->name);
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+		phy_id = 0;
+	}
+
+	snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+	phy_dev = phy_connect(dev, phy_name, &fec_enet_adjust_link, 0,
+		PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phy_dev)) {
+		printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+		return PTR_ERR(phy_dev);
 	}
 
 	/* mask with MAC supported features */
@@ -738,7 +751,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	fep->mii_bus->read = fec_enet_mdio_read;
 	fep->mii_bus->write = fec_enet_mdio_write;
 	fep->mii_bus->reset = fec_enet_mdio_reset;
-	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
 	fep->mii_bus->priv = fep;
 	fep->mii_bus->parent = &pdev->dev;
 
@@ -1311,6 +1324,9 @@ fec_probe(struct platform_device *pdev)
 	if (ret)
 		goto failed_mii_init;
 
+	/* Carrier starts down, phylib will bring it up */
+	netif_carrier_off(ndev);
+
 	ret = register_netdev(ndev);
 	if (ret)
 		goto failed_register;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a0da4a1..992db2f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1212,7 +1212,8 @@ static void rtl8169_update_counters(struct net_device *dev)
 	if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
 		return;
 
-	counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+	counters = dma_alloc_coherent(&tp->pci_dev->dev, sizeof(*counters),
+				      &paddr, GFP_KERNEL);
 	if (!counters)
 		return;
 
@@ -1233,7 +1234,8 @@ static void rtl8169_update_counters(struct net_device *dev)
 	RTL_W32(CounterAddrLow, 0);
 	RTL_W32(CounterAddrHigh, 0);
 
-	pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+	dma_free_coherent(&tp->pci_dev->dev, sizeof(*counters), counters,
+			  paddr);
 }
 
 static void rtl8169_get_ethtool_stats(struct net_device *dev,
@@ -3292,15 +3294,15 @@ static int rtl8169_open(struct net_device *dev)
 
 	/*
 	 * Rx and Tx desscriptors needs 256 bytes alignment.
-	 * pci_alloc_consistent provides more.
+	 * dma_alloc_coherent provides more.
 	 */
-	tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
-					       &tp->TxPhyAddr);
+	tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
+					     &tp->TxPhyAddr, GFP_KERNEL);
 	if (!tp->TxDescArray)
 		goto err_pm_runtime_put;
 
-	tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
-					       &tp->RxPhyAddr);
+	tp->RxDescArray = dma_alloc_coherent(&pdev->dev, R8169_RX_RING_BYTES,
+					     &tp->RxPhyAddr, GFP_KERNEL);
 	if (!tp->RxDescArray)
 		goto err_free_tx_0;
 
@@ -3334,12 +3336,12 @@ out:
 err_release_ring_2:
 	rtl8169_rx_clear(tp);
 err_free_rx_1:
-	pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
-			    tp->RxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+			  tp->RxPhyAddr);
 	tp->RxDescArray = NULL;
 err_free_tx_0:
-	pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
-			    tp->TxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+			  tp->TxPhyAddr);
 	tp->TxDescArray = NULL;
 err_pm_runtime_put:
 	pm_runtime_put_noidle(&pdev->dev);
@@ -3975,7 +3977,7 @@ static void rtl8169_free_rx_skb(struct rtl8169_private *tp,
 {
 	struct pci_dev *pdev = tp->pci_dev;
 
-	pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+	dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
 			 PCI_DMA_FROMDEVICE);
 	dev_kfree_skb(*sk_buff);
 	*sk_buff = NULL;
@@ -4000,7 +4002,7 @@ static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
 static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
 					    struct net_device *dev,
 					    struct RxDesc *desc, int rx_buf_sz,
-					    unsigned int align)
+					    unsigned int align, gfp_t gfp)
 {
 	struct sk_buff *skb;
 	dma_addr_t mapping;
@@ -4008,13 +4010,13 @@ static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
 
 	pad = align ? align : NET_IP_ALIGN;
 
-	skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+	skb = __netdev_alloc_skb(dev, rx_buf_sz + pad, gfp);
 	if (!skb)
 		goto err_out;
 
 	skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
 
-	mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+	mapping = dma_map_single(&pdev->dev, skb->data, rx_buf_sz,
 				 PCI_DMA_FROMDEVICE);
 
 	rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
@@ -4039,7 +4041,7 @@ static void rtl8169_rx_clear(struct rtl8169_private *tp)
 }
 
 static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
-			   u32 start, u32 end)
+			   u32 start, u32 end, gfp_t gfp)
 {
 	u32 cur;
 
@@ -4054,7 +4056,7 @@ static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
 
 		skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
 					   tp->RxDescArray + i,
-					   tp->rx_buf_sz, tp->align);
+					   tp->rx_buf_sz, tp->align, gfp);
 		if (!skb)
 			break;
 
@@ -4082,7 +4084,7 @@ static int rtl8169_init_ring(struct net_device *dev)
 	memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
 	memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
 
-	if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+	if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC, GFP_KERNEL) != NUM_RX_DESC)
 		goto err_out;
 
 	rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
@@ -4099,7 +4101,8 @@ static void rtl8169_unmap_tx_skb(struct pci_dev *pdev, struct ring_info *tx_skb,
 {
 	unsigned int len = tx_skb->len;
 
-	pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+	dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), len,
+			 PCI_DMA_TODEVICE);
 	desc->opts1 = 0x00;
 	desc->opts2 = 0x00;
 	desc->addr = 0x00;
@@ -4243,7 +4246,8 @@ static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
 		txd = tp->TxDescArray + entry;
 		len = frag->size;
 		addr = ((void *) page_address(frag->page)) + frag->page_offset;
-		mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+		mapping = dma_map_single(&tp->pci_dev->dev, addr, len,
+					 PCI_DMA_TODEVICE);
 
 		/* anti gcc 2.95.3 bugware (sic) */
 		status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
@@ -4313,7 +4317,8 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 		tp->tx_skb[entry].skb = skb;
 	}
 
-	mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+	mapping = dma_map_single(&tp->pci_dev->dev, skb->data, len,
+				 PCI_DMA_TODEVICE);
 
 	tp->tx_skb[entry].len = len;
 	txd->addr = cpu_to_le64(mapping);
@@ -4477,8 +4482,8 @@ static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
 	if (!skb)
 		goto out;
 
-	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
-				    PCI_DMA_FROMDEVICE);
+	dma_sync_single_for_cpu(&tp->pci_dev->dev, addr, pkt_size,
+				PCI_DMA_FROMDEVICE);
 	skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
@@ -4549,11 +4554,11 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 			rtl8169_rx_csum(skb, desc);
 
 			if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
-				pci_dma_sync_single_for_device(pdev, addr,
+				dma_sync_single_for_device(&pdev->dev, addr,
 					pkt_size, PCI_DMA_FROMDEVICE);
 				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 			} else {
-				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+				dma_unmap_single(&pdev->dev, addr, tp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
@@ -4583,7 +4588,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 	count = cur_rx - tp->cur_rx;
 	tp->cur_rx = cur_rx;
 
-	delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+	delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx, GFP_ATOMIC);
 	if (!delta && count)
 		netif_info(tp, intr, dev, "no Rx buffer allocated\n");
 	tp->dirty_rx += delta;
@@ -4769,10 +4774,10 @@ static int rtl8169_close(struct net_device *dev)
 
 	free_irq(dev->irq, dev);
 
-	pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
-			    tp->RxPhyAddr);
-	pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
-			    tp->TxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+			  tp->RxPhyAddr);
+	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+			  tp->TxPhyAddr);
 	tp->TxDescArray = NULL;
 	tp->RxDescArray = NULL;
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 40e5c46..465ae7e 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -43,6 +43,7 @@
 #include <linux/seq_file.h>
 #include <linux/mii.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 #include <asm/irq.h>
 
 #include "skge.h"
@@ -3868,6 +3869,8 @@ static void __devinit skge_show_addr(struct net_device *dev)
 	netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
 }
 
+static int only_32bit_dma;
+
 static int __devinit skge_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
@@ -3889,7 +3892,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 	} else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
@@ -4147,8 +4150,21 @@ static struct pci_driver skge_driver = {
 	.shutdown =	skge_shutdown,
 };
 
+static struct dmi_system_id skge_32bit_dma_boards[] = {
+	{
+		.ident = "Gigabyte nForce boards",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"),
+			DMI_MATCH(DMI_BOARD_NAME, "nForce"),
+		},
+	},
+	{}
+};
+
 static int __init skge_init_module(void)
 {
+	if (dmi_check_system(skge_32bit_dma_boards))
+		only_32bit_dma = 1;
 	skge_debug_init();
 	return pci_register_driver(&skge_driver);
 }
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index bc3af78..1ec4b9e 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4666,7 +4666,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 				       desc_idx, *post_ptr);
 		drop_it_no_recycle:
 			/* Other statistics kept track of by card. */
-			tp->net_stats.rx_dropped++;
+			tp->rx_dropped++;
 			goto next_pkt;
 		}
 
@@ -4726,7 +4726,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 		if (len > (tp->dev->mtu + ETH_HLEN) &&
 		    skb->protocol != htons(ETH_P_8021Q)) {
 			dev_kfree_skb(skb);
-			goto next_pkt;
+			goto drop_it_no_recycle;
 		}
 
 		if (desc->type_flags & RXD_FLAG_VLAN &&
@@ -9240,6 +9240,8 @@ static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
 	stats->rx_missed_errors = old_stats->rx_missed_errors +
 		get_stat64(&hw_stats->rx_discards);
 
+	stats->rx_dropped = tp->rx_dropped;
+
 	return stats;
 }
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 4937bd1..be7ff13 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2759,7 +2759,7 @@ struct tg3 {
 
 
 	/* begin "everything else" cacheline(s) section */
-	struct rtnl_link_stats64	net_stats;
+	unsigned long			rx_dropped;
 	struct rtnl_link_stats64	net_stats_prev;
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 8cc9e31..1737d14 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -1244,16 +1244,16 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 	int i, result;
 	struct device *dev = i2400m_dev(i2400m);
 	const struct i2400m_msg_hdr *msg_hdr;
-	size_t pl_itr, pl_size, skb_len;
+	size_t pl_itr, pl_size;
 	unsigned long flags;
-	unsigned num_pls, single_last;
+	unsigned num_pls, single_last, skb_len;
 
 	skb_len = skb->len;
-	d_fnstart(4, dev, "(i2400m %p skb %p [size %zu])\n",
+	d_fnstart(4, dev, "(i2400m %p skb %p [size %u])\n",
 		  i2400m, skb, skb_len);
 	result = -EIO;
 	msg_hdr = (void *) skb->data;
-	result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb->len);
+	result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb_len);
 	if (result < 0)
 		goto error_msg_hdr_check;
 	result = -EIO;
@@ -1261,10 +1261,10 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 	pl_itr = sizeof(*msg_hdr) +	/* Check payload descriptor(s) */
 		num_pls * sizeof(msg_hdr->pld[0]);
 	pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
-	if (pl_itr > skb->len) {	/* got all the payload descriptors? */
+	if (pl_itr > skb_len) {	/* got all the payload descriptors? */
 		dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
 			"%u payload descriptors (%zu each, total %zu)\n",
-			skb->len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
+			skb_len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
 		goto error_pl_descr_short;
 	}
 	/* Walk each payload payload--check we really got it */
@@ -1272,7 +1272,7 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 		/* work around old gcc warnings */
 		pl_size = i2400m_pld_size(&msg_hdr->pld[i]);
 		result = i2400m_rx_pl_descr_check(i2400m, &msg_hdr->pld[i],
-						  pl_itr, skb->len);
+						  pl_itr, skb_len);
 		if (result < 0)
 			goto error_pl_descr_check;
 		single_last = num_pls == 1 || i == num_pls - 1;
@@ -1290,16 +1290,16 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 	if (i < i2400m->rx_pl_min)
 		i2400m->rx_pl_min = i;
 	i2400m->rx_num++;
-	i2400m->rx_size_acc += skb->len;
-	if (skb->len < i2400m->rx_size_min)
-		i2400m->rx_size_min = skb->len;
-	if (skb->len > i2400m->rx_size_max)
-		i2400m->rx_size_max = skb->len;
+	i2400m->rx_size_acc += skb_len;
+	if (skb_len < i2400m->rx_size_min)
+		i2400m->rx_size_min = skb_len;
+	if (skb_len > i2400m->rx_size_max)
+		i2400m->rx_size_max = skb_len;
 	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 error_pl_descr_check:
 error_pl_descr_short:
 error_msg_hdr_check:
-	d_fnend(4, dev, "(i2400m %p skb %p [size %zu]) = %d\n",
+	d_fnend(4, dev, "(i2400m %p skb %p [size %u]) = %d\n",
 		i2400m, skb, skb_len, result);
 	return result;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index cc648b6..a3d95cc 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -543,7 +543,7 @@ static u8 ath9k_hw_chan_2_clockrate_mhz(struct ath_hw *ah)
 	if (conf_is_ht40(conf))
 		return clockrate * 2;
 
-	return clockrate * 2;
+	return clockrate;
 }
 
 static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah)
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 9024480..c44a5e8 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -51,7 +51,6 @@
  * TODO:
  *   - handle CPU hotplug
  *   - provide turbo enable/disable api
- *   - make sure we can write turbo enable/disable reg based on MISC_EN
  *
  * Related documents:
  *   - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
@@ -230,7 +229,7 @@
 #define THM_TC2		0xac
 #define THM_DTV		0xb0
 #define THM_ITV		0xd8
-#define   ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define   ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */
 #define   ITV_ME_SEQNO_SHIFT (16)
 #define   ITV_MCH_TEMP_MASK 0x0000ff00
 #define   ITV_MCH_TEMP_SHIFT (8)
@@ -325,6 +324,7 @@ struct ips_driver {
 	bool gpu_preferred;
 	bool poll_turbo_status;
 	bool second_cpu;
+	bool turbo_toggle_allowed;
 	struct ips_mcp_limits *limits;
 
 	/* Optional MCH interfaces for if i915 is in use */
@@ -415,7 +415,7 @@ static void ips_cpu_lower(struct ips_driver *ips)
 	new_limit = cur_limit - 8; /* 1W decrease */
 
 	/* Clamp to SKU TDP limit */
-	if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+	if (new_limit  < (ips->orig_turbo_limit & TURBO_TDP_MASK))
 		new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
 
 	thm_writew(THM_MPCPC, (new_limit * 10) / 8);
@@ -461,7 +461,8 @@ static void ips_enable_cpu_turbo(struct ips_driver *ips)
 	if (ips->__cpu_turbo_on)
 		return;
 
-	on_each_cpu(do_enable_cpu_turbo, ips, 1);
+	if (ips->turbo_toggle_allowed)
+		on_each_cpu(do_enable_cpu_turbo, ips, 1);
 
 	ips->__cpu_turbo_on = true;
 }
@@ -498,7 +499,8 @@ static void ips_disable_cpu_turbo(struct ips_driver *ips)
 	if (!ips->__cpu_turbo_on)
 		return;
 
-	on_each_cpu(do_disable_cpu_turbo, ips, 1);
+	if (ips->turbo_toggle_allowed)
+		on_each_cpu(do_disable_cpu_turbo, ips, 1);
 
 	ips->__cpu_turbo_on = false;
 }
@@ -598,17 +600,29 @@ static bool mcp_exceeded(struct ips_driver *ips)
 {
 	unsigned long flags;
 	bool ret = false;
+	u32 temp_limit;
+	u32 avg_power;
+	const char *msg = "MCP limit exceeded: ";
 
 	spin_lock_irqsave(&ips->turbo_status_lock, flags);
-	if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
-		ret = true;
-	if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
+
+	temp_limit = ips->mcp_temp_limit * 100;
+	if (ips->mcp_avg_temp > temp_limit) {
+		dev_info(&ips->dev->dev,
+			"%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp,
+			temp_limit);
 		ret = true;
-	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+	}
 
-	if (ret)
+	avg_power = ips->cpu_avg_power + ips->mch_avg_power;
+	if (avg_power > ips->mcp_power_limit) {
 		dev_info(&ips->dev->dev,
-			 "MCP power or thermal limit exceeded\n");
+			"%sAvg power %u, limit %u\n", msg, avg_power,
+			ips->mcp_power_limit);
+		ret = true;
+	}
+
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
 
 	return ret;
 }
@@ -663,6 +677,27 @@ static bool mch_exceeded(struct ips_driver *ips)
 }
 
 /**
+ * verify_limits - verify BIOS provided limits
+ * @ips: IPS structure
+ *
+ * BIOS can optionally provide non-default limits for power and temp.  Check
+ * them here and use the defaults if the BIOS values are not provided or
+ * are otherwise unusable.
+ */
+static void verify_limits(struct ips_driver *ips)
+{
+	if (ips->mcp_power_limit < ips->limits->mcp_power_limit ||
+	    ips->mcp_power_limit > 35000)
+		ips->mcp_power_limit = ips->limits->mcp_power_limit;
+
+	if (ips->mcp_temp_limit < ips->limits->core_temp_limit ||
+	    ips->mcp_temp_limit < ips->limits->mch_temp_limit ||
+	    ips->mcp_temp_limit > 150)
+		ips->mcp_temp_limit = min(ips->limits->core_temp_limit,
+					  ips->limits->mch_temp_limit);
+}
+
+/**
  * update_turbo_limits - get various limits & settings from regs
  * @ips: IPS driver struct
  *
@@ -680,12 +715,21 @@ static void update_turbo_limits(struct ips_driver *ips)
 	u32 hts = thm_readl(THM_HTS);
 
 	ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
-	ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+	/* 
+	 * Disable turbo for now, until we can figure out why the power figures
+	 * are wrong
+	 */
+	ips->cpu_turbo_enabled = false;
+
+	if (ips->gpu_busy)
+		ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+
 	ips->core_power_limit = thm_readw(THM_MPCPC);
 	ips->mch_power_limit = thm_readw(THM_MMGPC);
 	ips->mcp_temp_limit = thm_readw(THM_PTL);
 	ips->mcp_power_limit = thm_readw(THM_MPPC);
 
+	verify_limits(ips);
 	/* Ignore BIOS CPU vs GPU pref */
 }
 
@@ -858,7 +902,7 @@ static u32 get_cpu_power(struct ips_driver *ips, u32 *last, int period)
 	ret = (ret * 1000) / 65535;
 	*last = val;
 
-	return ret;
+	return 0;
 }
 
 static const u16 temp_decay_factor = 2;
@@ -940,7 +984,6 @@ static int ips_monitor(void *data)
 		kfree(mch_samples);
 		kfree(cpu_samples);
 		kfree(mchp_samples);
-		kthread_stop(ips->adjust);
 		return -ENOMEM;
 	}
 
@@ -948,7 +991,7 @@ static int ips_monitor(void *data)
 		ITV_ME_SEQNO_SHIFT;
 	seqno_timestamp = get_jiffies_64();
 
-	old_cpu_power = thm_readl(THM_CEC) / 65535;
+	old_cpu_power = thm_readl(THM_CEC);
 	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
 
 	/* Collect an initial average */
@@ -1150,11 +1193,18 @@ static irqreturn_t ips_irq_handler(int irq, void *arg)
 				STS_GPL_SHIFT;
 			/* ignore EC CPU vs GPU pref */
 			ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
-			ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+			/* 
+			 * Disable turbo for now, until we can figure
+			 * out why the power figures are wrong
+			 */
+			ips->cpu_turbo_enabled = false;
+			if (ips->gpu_busy)
+				ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
 			ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
 				STS_PTL_SHIFT;
 			ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
 				STS_PPL_SHIFT;
+			verify_limits(ips);
 			spin_unlock(&ips->turbo_status_lock);
 
 			thm_writeb(THM_SEC, SEC_ACK);
@@ -1333,8 +1383,10 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips)
 	 * turbo manually or we'll get an illegal MSR access, even though
 	 * turbo will still be available.
 	 */
-	if (!(misc_en & IA32_MISC_TURBO_EN))
-		; /* add turbo MSR write allowed flag if necessary */
+	if (misc_en & IA32_MISC_TURBO_EN)
+		ips->turbo_toggle_allowed = true;
+	else
+		ips->turbo_toggle_allowed = false;
 
 	if (strstr(boot_cpu_data.x86_model_id, "CPU       M"))
 		limits = &ips_sv_limits;
@@ -1351,9 +1403,10 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips)
 	tdp = turbo_power & TURBO_TDP_MASK;
 
 	/* Sanity check TDP against CPU */
-	if (limits->mcp_power_limit != (tdp / 8) * 1000) {
-		dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
-			 tdp / 8, limits->mcp_power_limit / 1000);
+	if (limits->core_power_limit != (tdp / 8) * 1000) {
+		dev_info(&ips->dev->dev, "CPU TDP doesn't match expected value (found %d, expected %d)\n",
+			 tdp / 8, limits->core_power_limit / 1000);
+		limits->core_power_limit = (tdp / 8) * 1000;
 	}
 
 out:
@@ -1390,7 +1443,7 @@ static bool ips_get_i915_syms(struct ips_driver *ips)
 	return true;
 
 out_put_busy:
-	symbol_put(i915_gpu_turbo_disable);
+	symbol_put(i915_gpu_busy);
 out_put_lower:
 	symbol_put(i915_gpu_lower);
 out_put_raise:
@@ -1532,22 +1585,27 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Save turbo limits & ratios */
 	rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
 
-	ips_enable_cpu_turbo(ips);
-	ips->cpu_turbo_enabled = true;
+	ips_disable_cpu_turbo(ips);
+	ips->cpu_turbo_enabled = false;
 
-	/* Set up the work queue and monitor/adjust threads */
-	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
-	if (IS_ERR(ips->monitor)) {
+	/* Create thermal adjust thread */
+	ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
+	if (IS_ERR(ips->adjust)) {
 		dev_err(&dev->dev,
-			"failed to create thermal monitor thread, aborting\n");
+			"failed to create thermal adjust thread, aborting\n");
 		ret = -ENOMEM;
 		goto error_free_irq;
+
 	}
 
-	ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
-	if (IS_ERR(ips->adjust)) {
+	/*
+	 * Set up the work queue and monitor thread. The monitor thread
+	 * will wake up ips_adjust thread.
+	 */
+	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+	if (IS_ERR(ips->monitor)) {
 		dev_err(&dev->dev,
-			"failed to create thermal adjust thread, aborting\n");
+			"failed to create thermal monitor thread, aborting\n");
 		ret = -ENOMEM;
 		goto error_thread_cleanup;
 	}
@@ -1566,7 +1624,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return ret;
 
 error_thread_cleanup:
-	kthread_stop(ips->monitor);
+	kthread_stop(ips->adjust);
 error_free_irq:
 	free_irq(ips->dev->irq, ips);
 error_unmap:
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index df1fb53..a4be416 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -256,7 +256,6 @@ static int __devexit ad5398_remove(struct i2c_client *client)
 
 	regulator_unregister(chip->rdev);
 	kfree(chip);
-	i2c_set_clientdata(client, NULL);
 
 	return 0;
 }
diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index d61ecb8..b8cc638 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -191,8 +191,6 @@ static int __devexit isl6271a_remove(struct i2c_client *i2c)
 	struct isl_pmic *pmic = i2c_get_clientdata(i2c);
 	int i;
 
-	i2c_set_clientdata(i2c, NULL);
-
 	for (i = 0; i < 3; i++)
 		regulator_unregister(pmic->rdev[i]);
 
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 9daed8d..9de8516 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -268,7 +268,6 @@ out_irq:
 		free_irq(client->irq, client);
 
 out_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(ds3232);
 	return ret;
 }
@@ -287,7 +286,6 @@ static int __devexit ds3232_remove(struct i2c_client *client)
 	}
 
 	rtc_device_unregister(ds3232->rtc);
-	i2c_set_clientdata(client, NULL);
 	kfree(ds3232);
 	return 0;
 }
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 12900f7..3198c53 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
+	default 6 if ARCH_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
@@ -526,12 +527,12 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
+	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
 	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
 	  and S5PC100 SoCs
 
 config SERIAL_S5PV210
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index b1156ba..7ac2bf5 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
 	port->mapbase = res->start;
-	port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
+	port->membase = S3C_VA_UART + (res->start & 0xfffff);
 	ret = platform_get_irq(platdev, 0);
 	if (ret < 0)
 		port->irq = 0;
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index c725356..de7ebb9 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_TM6000
 	tristate "TV Master TM5600/6000/6010 driver"
-	depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
+	depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
 	select VIDEO_TUNER
 	select MEDIA_TUNER_XC2028
 	select MEDIA_TUNER_XC5000
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 32f7a0a..54f7667 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -46,7 +46,7 @@ MODULE_PARM_DESC(enable_ir, "enable ir (default is enable");
 	}
 
 struct tm6000_ir_poll_result {
-	u8 rc_data[4];
+	u16 rc_data;
 };
 
 struct tm6000_IR {
@@ -60,9 +60,9 @@ struct tm6000_IR {
 	int			polling;
 	struct delayed_work	work;
 	u8			wait:1;
+	u8			key:1;
 	struct urb		*int_urb;
 	u8			*urb_data;
-	u8			key:1;
 
 	int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
 
@@ -122,13 +122,14 @@ static void tm6000_ir_urb_received(struct urb *urb)
 
 	if (urb->status != 0)
 		printk(KERN_INFO "not ready\n");
-	else if (urb->actual_length > 0)
+	else if (urb->actual_length > 0) {
 		memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
 
-	dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
-	ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+		dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+			ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
 
-	ir->key = 1;
+		ir->key = 1;
+	}
 
 	rc = usb_submit_urb(urb, GFP_ATOMIC);
 }
@@ -140,30 +141,47 @@ static int default_polling_getkey(struct tm6000_IR *ir,
 	int rc;
 	u8 buf[2];
 
-	if (ir->wait && !&dev->int_in) {
-		poll_result->rc_data[0] = 0xff;
+	if (ir->wait && !&dev->int_in)
 		return 0;
-	}
 
 	if (&dev->int_in) {
-		poll_result->rc_data[0] = ir->urb_data[0];
-		poll_result->rc_data[1] = ir->urb_data[1];
+		if (ir->ir.ir_type == IR_TYPE_RC5)
+			poll_result->rc_data = ir->urb_data[0];
+		else
+			poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
 	} else {
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
 		msleep(10);
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
 		msleep(10);
 
-		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
-		 USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+		if (ir->ir.ir_type == IR_TYPE_RC5) {
+			rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+				USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				REQ_02_GET_IR_CODE, 0, 0, buf, 1);
 
-		msleep(10);
+			msleep(10);
 
-		dprintk("read data=%02x\n", buf[0]);
-		if (rc < 0)
-			return rc;
+			dprintk("read data=%02x\n", buf[0]);
+			if (rc < 0)
+				return rc;
 
-		poll_result->rc_data[0] = buf[0];
+			poll_result->rc_data = buf[0];
+		} else {
+			rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+				USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+			msleep(10);
+
+			dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+			if (rc < 0)
+				return rc;
+
+			poll_result->rc_data = buf[0] | buf[1] << 8;
+		}
+		if ((poll_result->rc_data & 0x00ff) != 0xff)
+			ir->key = 1;
 	}
 	return 0;
 }
@@ -180,12 +198,11 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
 		return;
 	}
 
-	dprintk("ir->get_key result data=%02x %02x\n",
-		poll_result.rc_data[0], poll_result.rc_data[1]);
+	dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
 
-	if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+	if (ir->key) {
 		ir_input_keydown(ir->input->input_dev, &ir->ir,
-			poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+				(u32)poll_result.rc_data);
 
 		ir_input_nokey(ir->input->input_dev, &ir->ir);
 		ir->key = 0;
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index f96eff0..a6395bd 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -134,10 +134,6 @@ static int aout_core_dump(struct coredump_params *cprm)
 		if (!dump_write(file, dump_start, dump_size))
 			goto end_coredump;
 	}
-/* Finally dump the task struct.  Not be used by gdb, but could be useful */
-	set_fs(KERNEL_DS);
-	if (!dump_write(file, current, sizeof(*current)))
-		goto end_coredump;
 end_coredump:
 	set_fs(fs);
 	return has_dumped;
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 73c1530..5e9da99 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2283,7 +2283,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	int mds = session->s_mds;
-	int seq = le32_to_cpu(grant->seq);
+	unsigned seq = le32_to_cpu(grant->seq);
+	unsigned issue_seq = le32_to_cpu(grant->issue_seq);
 	int newcaps = le32_to_cpu(grant->caps);
 	int issued, implemented, used, wanted, dirty;
 	u64 size = le64_to_cpu(grant->size);
@@ -2295,8 +2296,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	int revoked_rdcache = 0;
 	int queue_invalidate = 0;
 
-	dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
-	     inode, cap, mds, seq, ceph_cap_string(newcaps));
+	dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
+	     inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
 	dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
 		inode->i_size);
 
@@ -2392,6 +2393,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	}
 
 	cap->seq = seq;
+	cap->issue_seq = issue_seq;
 
 	/* file layout may have changed */
 	ci->i_layout = grant->layout;
@@ -2774,15 +2776,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 		if (op == CEPH_CAP_OP_IMPORT)
 			__queue_cap_release(session, vino.ino, cap_id,
 					    mseq, seq);
-
-		/*
-		 * send any full release message to try to move things
-		 * along for the mds (who clearly thinks we still have this
-		 * cap).
-		 */
-		ceph_add_cap_releases(mdsc, session);
-		ceph_send_cap_releases(mdsc, session);
-		goto done;
+		goto flush_cap_releases;
 	}
 
 	/* these will work even if we don't have a cap yet */
@@ -2810,7 +2804,7 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 		dout(" no cap on %p ino %llx.%llx from mds%d\n",
 		     inode, ceph_ino(inode), ceph_snap(inode), mds);
 		spin_unlock(&inode->i_lock);
-		goto done;
+		goto flush_cap_releases;
 	}
 
 	/* note that each of these drops i_lock for us */
@@ -2834,6 +2828,17 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 		       ceph_cap_op_name(op));
 	}
 
+	goto done;
+
+flush_cap_releases:
+	/*
+	 * send any full release message to try to move things
+	 * along for the mds (who clearly thinks we still have this
+	 * cap).
+	 */
+	ceph_add_cap_releases(mdsc, session);
+	ceph_send_cap_releases(mdsc, session);
+
 done:
 	mutex_unlock(&session->s_mutex);
 done_unlocked:
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index 4480cb1..e38423e 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -42,32 +42,37 @@ struct ceph_nfs_confh {
 static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len,
 			  int connectable)
 {
+	int type;
 	struct ceph_nfs_fh *fh = (void *)rawfh;
 	struct ceph_nfs_confh *cfh = (void *)rawfh;
 	struct dentry *parent = dentry->d_parent;
 	struct inode *inode = dentry->d_inode;
-	int type;
+	int connected_handle_length = sizeof(*cfh)/4;
+	int handle_length = sizeof(*fh)/4;
 
 	/* don't re-export snaps */
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EINVAL;
 
-	if (*max_len >= sizeof(*cfh)) {
+	if (*max_len >= connected_handle_length) {
 		dout("encode_fh %p connectable\n", dentry);
 		cfh->ino = ceph_ino(dentry->d_inode);
 		cfh->parent_ino = ceph_ino(parent->d_inode);
 		cfh->parent_name_hash = parent->d_name.hash;
-		*max_len = sizeof(*cfh);
+		*max_len = connected_handle_length;
 		type = 2;
-	} else if (*max_len > sizeof(*fh)) {
-		if (connectable)
-			return -ENOSPC;
+	} else if (*max_len >= handle_length) {
+		if (connectable) {
+			*max_len = connected_handle_length;
+			return 255;
+		}
 		dout("encode_fh %p\n", dentry);
 		fh->ino = ceph_ino(dentry->d_inode);
-		*max_len = sizeof(*fh);
+		*max_len = handle_length;
 		type = 1;
 	} else {
-		return -ENOSPC;
+		*max_len = handle_length;
+		return 255;
 	}
 	return type;
 }
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 8c044a4..66e4da6 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -697,7 +697,7 @@ more:
 			 * start_request so that a tid has been assigned.
 			 */
 			spin_lock(&ci->i_unsafe_lock);
-			list_add(&ci->i_unsafe_writes, &req->r_unsafe_item);
+			list_add(&req->r_unsafe_item, &ci->i_unsafe_writes);
 			spin_unlock(&ci->i_unsafe_lock);
 			ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR);
 		}
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index dfced1d..3b5571b 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -549,7 +549,7 @@ static void __unregister_request(struct ceph_osd_client *osdc,
  */
 static void __cancel_request(struct ceph_osd_request *req)
 {
-	if (req->r_sent) {
+	if (req->r_sent && req->r_osd) {
 		ceph_con_revoke(&req->r_osd->o_con, req->r_request);
 		req->r_sent = 0;
 	}
diff --git a/fs/exec.c b/fs/exec.c
index 828dd24..03278c9 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -2014,3 +2014,41 @@ fail_creds:
 fail:
 	return;
 }
+
+/*
+ * Core dumping helper functions.  These are the only things you should
+ * do on a core-file: use only these functions to write out all the
+ * necessary info.
+ */
+int dump_write(struct file *file, const void *addr, int nr)
+{
+	return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+
+int dump_seek(struct file *file, loff_t off)
+{
+	int ret = 1;
+
+	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
+		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
+			return 0;
+	} else {
+		char *buf = (char *)get_zeroed_page(GFP_KERNEL);
+
+		if (!buf)
+			return 0;
+		while (off > 0) {
+			unsigned long n = off;
+
+			if (n > PAGE_SIZE)
+				n = PAGE_SIZE;
+			if (!dump_write(file, buf, n)) {
+				ret = 0;
+				break;
+			}
+			off -= n;
+		}
+		free_page((unsigned long)buf);
+	}
+	return ret;
+}
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index eb7368e..3eadd97 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -54,6 +54,9 @@ struct page_collect {
 	unsigned nr_pages;
 	unsigned long length;
 	loff_t pg_first; /* keep 64bit also in 32-arches */
+	bool read_4_write; /* This means two things: that the read is sync
+			    * And the pages should not be unlocked.
+			    */
 };
 
 static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
@@ -71,6 +74,7 @@ static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
 	pcol->nr_pages = 0;
 	pcol->length = 0;
 	pcol->pg_first = -1;
+	pcol->read_4_write = false;
 }
 
 static void _pcol_reset(struct page_collect *pcol)
@@ -347,7 +351,8 @@ static int readpage_strip(void *data, struct page *page)
 		if (PageError(page))
 			ClearPageError(page);
 
-		unlock_page(page);
+		if (!pcol->read_4_write)
+			unlock_page(page);
 		EXOFS_DBGMSG("readpage_strip(0x%lx, 0x%lx) empty page,"
 			     " splitting\n", inode->i_ino, page->index);
 
@@ -428,6 +433,7 @@ static int _readpage(struct page *page, bool is_sync)
 	/* readpage_strip might call read_exec(,is_sync==false) at several
 	 * places but not if we have a single page.
 	 */
+	pcol.read_4_write = is_sync;
 	ret = readpage_strip(&pcol, page);
 	if (ret) {
 		EXOFS_ERR("_readpage => %d\n", ret);
diff --git a/fs/nfsd/nfsfh.h b/fs/nfsd/nfsfh.h
index cdfb8c6..c16f8d8 100644
--- a/fs/nfsd/nfsfh.h
+++ b/fs/nfsd/nfsfh.h
@@ -196,8 +196,6 @@ fh_lock(struct svc_fh *fhp)
 static inline void
 fh_unlock(struct svc_fh *fhp)
 {
-	BUG_ON(!fhp->fh_dentry);
-
 	if (fhp->fh_locked) {
 		fill_post_wcc(fhp);
 		mutex_unlock(&fhp->fh_dentry->d_inode->i_mutex);
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 22c629e..b388443 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -3,4 +3,4 @@ config FSNOTIFY
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
-source "fs/notify/fanotify/Kconfig"
+#source "fs/notify/fanotify/Kconfig"
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index d59c4a6..81976ff 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -668,14 +668,11 @@ xfs_inode_set_reclaim_tag(
 	xfs_perag_put(pag);
 }
 
-void
-__xfs_inode_clear_reclaim_tag(
-	xfs_mount_t	*mp,
+STATIC void
+__xfs_inode_clear_reclaim(
 	xfs_perag_t	*pag,
 	xfs_inode_t	*ip)
 {
-	radix_tree_tag_clear(&pag->pag_ici_root,
-			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
 	pag->pag_ici_reclaimable--;
 	if (!pag->pag_ici_reclaimable) {
 		/* clear the reclaim tag from the perag radix tree */
@@ -689,6 +686,17 @@ __xfs_inode_clear_reclaim_tag(
 	}
 }
 
+void
+__xfs_inode_clear_reclaim_tag(
+	xfs_mount_t	*mp,
+	xfs_perag_t	*pag,
+	xfs_inode_t	*ip)
+{
+	radix_tree_tag_clear(&pag->pag_ici_root,
+			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+	__xfs_inode_clear_reclaim(pag, ip);
+}
+
 /*
  * Inodes in different states need to be treated differently, and the return
  * value of xfs_iflush is not sufficient to get this right. The following table
@@ -838,6 +846,7 @@ reclaim:
 	if (!radix_tree_delete(&pag->pag_ici_root,
 				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
 		ASSERT(0);
+	__xfs_inode_clear_reclaim(pag, ip);
 	write_unlock(&pag->pag_ici_lock);
 
 	/*
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 267a86c..2040e6c 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -246,9 +246,11 @@ struct ttm_buffer_object {
 
 	atomic_t reserved;
 
-
 	/**
 	 * Members protected by the bo::lock
+	 * In addition, setting sync_obj to anything else
+	 * than NULL requires bo::reserved to be held. This allows for
+	 * checking NULL while reserved but not holding bo::lock.
 	 */
 
 	void *sync_obj_arg;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 626b629..4e8ea8c 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -118,7 +118,6 @@ header-y += eventpoll.h
 header-y += ext2_fs.h
 header-y += fadvise.h
 header-y += falloc.h
-header-y += fanotify.h
 header-y += fb.h
 header-y += fcntl.h
 header-y += fd.h
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index 8ba66a9..ba4b85a 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -9,37 +9,7 @@
  * These are the only things you should do on a core-file: use only these
  * functions to write out all the necessary info.
  */
-static inline int dump_write(struct file *file, const void *addr, int nr)
-{
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
-
-static inline int dump_seek(struct file *file, loff_t off)
-{
-	int ret = 1;
-
-	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
-		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
-			return 0;
-	} else {
-		char *buf = (char *)get_zeroed_page(GFP_KERNEL);
-
-		if (!buf)
-			return 0;
-		while (off > 0) {
-			unsigned long n = off;
-
-			if (n > PAGE_SIZE)
-				n = PAGE_SIZE;
-			if (!dump_write(file, buf, n)) {
-				ret = 0;
-				break;
-			}
-			off -= n;
-		}
-		free_page((unsigned long)buf);
-	}
-	return ret;
-}
+extern int dump_write(struct file *file, const void *addr, int nr);
+extern int dump_seek(struct file *file, loff_t off);
 
 #endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 926b503..4fd978e 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -93,6 +93,7 @@ struct elevator_queue
 	struct elevator_type *elevator_type;
 	struct mutex sysfs_lock;
 	struct hlist_head *hash;
+	unsigned int registered:1;
 };
 
 /*
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index 97e07f4..aa4ebb4 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -48,6 +48,7 @@ struct videobuf_dmabuf {
 
 	/* for userland buffer */
 	int                 offset;
+	size_t		    size;
 	struct page         **pages;
 
 	/* for kernel buffers */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..30fce01 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -161,12 +161,30 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l
 {
 	struct sk_buff *skb;
 
+	release_sock(sk);
 	if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
 		skb_reserve(skb, BT_SKB_RESERVE);
 		bt_cb(skb)->incoming  = 0;
 	}
+	lock_sock(sk);
+
+	if (!skb && *err)
+		return NULL;
+
+	*err = sock_error(sk);
+	if (*err)
+		goto out;
+
+	if (sk->sk_shutdown) {
+		*err = -ECONNRESET;
+		goto out;
+	}
 
 	return skb;
+
+out:
+	kfree_skb(skb);
+	return NULL;
 }
 
 int bt_err(__u16 code);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index db5b560..b98bed3 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -2202,15 +2202,13 @@ static void perf_event_for_each(struct perf_event *event,
 static int perf_event_period(struct perf_event *event, u64 __user *arg)
 {
 	struct perf_event_context *ctx = event->ctx;
-	unsigned long size;
 	int ret = 0;
 	u64 value;
 
 	if (!event->attr.sample_period)
 		return -EINVAL;
 
-	size = copy_from_user(&value, arg, sizeof(value));
-	if (size != sizeof(value))
+	if (copy_from_user(&value, arg, sizeof(value)))
 		return -EFAULT;
 
 	if (!value)
diff --git a/kernel/signal.c b/kernel/signal.c
index bded651..919562c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2215,6 +2215,14 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 #ifdef __ARCH_SI_TRAPNO
 		err |= __put_user(from->si_trapno, &to->si_trapno);
 #endif
+#ifdef BUS_MCEERR_AO
+		/* 
+		 * Other callers might not initialize the si_lsb field,
+	 	 * so check explicitely for the right codes here.
+		 */
+		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
 		break;
 	case __SI_CHLD:
 		err |= __put_user(from->si_pid, &to->si_pid);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index f88552c..3a45c22 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2485,7 +2485,7 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 		kbuf[left] = 0;
 	}
 
-	for (; left && vleft--; i++, min++, max++, first=0) {
+	for (; left && vleft--; i++, first = 0) {
 		unsigned long val;
 
 		if (write) {
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 492197e..bca9637 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -405,7 +405,7 @@ static inline int test_time_stamp(u64 delta)
 #define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
 
 /* Max number of timestamps that can fit on a page */
-#define RB_TIMESTAMPS_PER_PAGE	(BUF_PAGE_SIZE / RB_LEN_TIME_STAMP)
+#define RB_TIMESTAMPS_PER_PAGE	(BUF_PAGE_SIZE / RB_LEN_TIME_EXTEND)
 
 int ring_buffer_print_page_header(struct trace_seq *s)
 {
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 3eed583..9be3cf8 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3587,9 +3587,13 @@ unlock:
 
 static void mem_cgroup_threshold(struct mem_cgroup *memcg)
 {
-	__mem_cgroup_threshold(memcg, false);
-	if (do_swap_account)
-		__mem_cgroup_threshold(memcg, true);
+	while (memcg) {
+		__mem_cgroup_threshold(memcg, false);
+		if (do_swap_account)
+			__mem_cgroup_threshold(memcg, true);
+
+		memcg = parent_mem_cgroup(memcg);
+	}
 }
 
 static int compare_thresholds(const void *a, const void *b)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 9c26eec..757f6b0 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -183,7 +183,7 @@ EXPORT_SYMBOL_GPL(hwpoison_filter);
  * signal.
  */
 static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
-			unsigned long pfn)
+			unsigned long pfn, struct page *page)
 {
 	struct siginfo si;
 	int ret;
@@ -198,7 +198,7 @@ static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
 #ifdef __ARCH_SI_TRAPNO
 	si.si_trapno = trapno;
 #endif
-	si.si_addr_lsb = PAGE_SHIFT;
+	si.si_addr_lsb = compound_order(compound_head(page)) + PAGE_SHIFT;
 	/*
 	 * Don't use force here, it's convenient if the signal
 	 * can be temporarily blocked.
@@ -235,7 +235,7 @@ void shake_page(struct page *p, int access)
 		int nr;
 		do {
 			nr = shrink_slab(1000, GFP_KERNEL, 1000);
-			if (page_count(p) == 0)
+			if (page_count(p) == 1)
 				break;
 		} while (nr > 10);
 	}
@@ -327,7 +327,7 @@ static void add_to_kill(struct task_struct *tsk, struct page *p,
  * wrong earlier.
  */
 static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
-			  int fail, unsigned long pfn)
+			  int fail, struct page *page, unsigned long pfn)
 {
 	struct to_kill *tk, *next;
 
@@ -352,7 +352,7 @@ static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
 			 * process anyways.
 			 */
 			else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
-					      pfn) < 0)
+					      pfn, page) < 0)
 				printk(KERN_ERR
 		"MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
 					pfn, tk->tsk->comm, tk->tsk->pid);
@@ -928,7 +928,7 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
 	 * any accesses to the poisoned memory.
 	 */
 	kill_procs_ao(&tokill, !!PageDirty(hpage), trapno,
-		      ret != SWAP_SUCCESS, pfn);
+		      ret != SWAP_SUCCESS, p, pfn);
 
 	return ret;
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a8cfa9c..f12ad18 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5182,9 +5182,9 @@ void *__init alloc_large_system_hash(const char *tablename,
 	if (!table)
 		panic("Failed to allocate %s hash table\n", tablename);
 
-	printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n",
+	printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n",
 	       tablename,
-	       (1U << log2qty),
+	       (1UL << log2qty),
 	       ilog2(size) - PAGE_SHIFT,
 	       size);
 
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 622b471..74bcc66 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -778,7 +778,7 @@ static void mpc_push(struct atm_vcc *vcc, struct sk_buff *skb)
 	eg->packets_rcvd++;
 	mpc->eg_ops->put(eg);
 
-	memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
+	memset(ATM_SKB(new_skb), 0, sizeof(struct atm_skb_data));
 	netif_rx(new_skb);
 }
 
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index fadf26b..0b54b7d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1441,33 +1441,23 @@ static inline void l2cap_do_send(struct sock *sk, struct sk_buff *skb)
 
 static void l2cap_streaming_send(struct sock *sk)
 {
-	struct sk_buff *skb, *tx_skb;
+	struct sk_buff *skb;
 	struct l2cap_pinfo *pi = l2cap_pi(sk);
 	u16 control, fcs;
 
-	while ((skb = sk->sk_send_head)) {
-		tx_skb = skb_clone(skb, GFP_ATOMIC);
-
-		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+	while ((skb = skb_dequeue(TX_QUEUE(sk)))) {
+		control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE);
 		control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
-		put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+		put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE);
 
 		if (pi->fcs == L2CAP_FCS_CRC16) {
-			fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
-			put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+			fcs = crc16(0, (u8 *)skb->data, skb->len - 2);
+			put_unaligned_le16(fcs, skb->data + skb->len - 2);
 		}
 
-		l2cap_do_send(sk, tx_skb);
+		l2cap_do_send(sk, skb);
 
 		pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
-
-		if (skb_queue_is_last(TX_QUEUE(sk), skb))
-			sk->sk_send_head = NULL;
-		else
-			sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
-
-		skb = skb_dequeue(TX_QUEUE(sk));
-		kfree_skb(skb);
 	}
 }
 
@@ -1960,6 +1950,11 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us
 
 	switch (optname) {
 	case L2CAP_OPTIONS:
+		if (sk->sk_state == BT_CONNECTED) {
+			err = -EINVAL;
+			break;
+		}
+
 		opts.imtu     = l2cap_pi(sk)->imtu;
 		opts.omtu     = l2cap_pi(sk)->omtu;
 		opts.flush_to = l2cap_pi(sk)->flush_to;
@@ -2771,10 +2766,10 @@ static int l2cap_parse_conf_rsp(struct sock *sk, void *rsp, int len, void *data,
 		case L2CAP_CONF_MTU:
 			if (val < L2CAP_DEFAULT_MIN_MTU) {
 				*result = L2CAP_CONF_UNACCEPT;
-				pi->omtu = L2CAP_DEFAULT_MIN_MTU;
+				pi->imtu = L2CAP_DEFAULT_MIN_MTU;
 			} else
-				pi->omtu = val;
-			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+				pi->imtu = val;
+			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
 			break;
 
 		case L2CAP_CONF_FLUSH_TO:
@@ -3071,6 +3066,17 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	return 0;
 }
 
+static inline void set_default_fcs(struct l2cap_pinfo *pi)
+{
+	/* FCS is enabled only in ERTM or streaming mode, if one or both
+	 * sides request it.
+	 */
+	if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
+		pi->fcs = L2CAP_FCS_NONE;
+	else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV))
+		pi->fcs = L2CAP_FCS_CRC16;
+}
+
 static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
 {
 	struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
@@ -3088,14 +3094,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 	if (!sk)
 		return -ENOENT;
 
-	if (sk->sk_state != BT_CONFIG) {
-		struct l2cap_cmd_rej rej;
-
-		rej.reason = cpu_to_le16(0x0002);
-		l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
-				sizeof(rej), &rej);
+	if (sk->sk_state == BT_DISCONN)
 		goto unlock;
-	}
 
 	/* Reject if config buffer is too small. */
 	len = cmd_len - sizeof(*req);
@@ -3135,9 +3135,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 		goto unlock;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
-		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
-			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+		set_default_fcs(l2cap_pi(sk));
 
 		sk->sk_state = BT_CONNECTED;
 
@@ -3225,9 +3223,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 	l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
-		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
-			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+		set_default_fcs(l2cap_pi(sk));
 
 		sk->sk_state = BT_CONNECTED;
 		l2cap_pi(sk)->next_tx_seq = 0;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 44a6232..194b3a0 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -82,11 +82,14 @@ static void rfcomm_sk_data_ready(struct rfcomm_dlc *d, struct sk_buff *skb)
 static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err)
 {
 	struct sock *sk = d->owner, *parent;
+	unsigned long flags;
+
 	if (!sk)
 		return;
 
 	BT_DBG("dlc %p state %ld err %d", d, d->state, err);
 
+	local_irq_save(flags);
 	bh_lock_sock(sk);
 
 	if (err)
@@ -108,6 +111,7 @@ static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err)
 	}
 
 	bh_unlock_sock(sk);
+	local_irq_restore(flags);
 
 	if (parent && sock_flag(sk, SOCK_ZAPPED)) {
 		/* We have to drop DLC lock here, otherwise
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 8ce9047..4bf28f2 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -827,6 +827,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 	long timeo;
 	int err;
 	int ifindex, headroom, tailroom;
+	unsigned int mtu;
 	struct net_device *dev;
 
 	lock_sock(sk);
@@ -896,15 +897,23 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 		cf_sk->sk.sk_state = CAIF_DISCONNECTED;
 		goto out;
 	}
-	dev = dev_get_by_index(sock_net(sk), ifindex);
+
+	err = -ENODEV;
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
+	if (!dev) {
+		rcu_read_unlock();
+		goto out;
+	}
 	cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom);
+	mtu = dev->mtu;
+	rcu_read_unlock();
+
 	cf_sk->tailroom = tailroom;
-	cf_sk->maxframe = dev->mtu - (headroom + tailroom);
-	dev_put(dev);
+	cf_sk->maxframe = mtu - (headroom + tailroom);
 	if (cf_sk->maxframe < 1) {
-		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n",
-			__func__, dev->mtu);
-		err = -ENODEV;
+		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n",
+			   __func__, mtu);
 		goto out;
 	}
 
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 7a85367..8451ab4 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -348,7 +348,7 @@ static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev,
 	if (info.cmd == ETHTOOL_GRXCLSRLALL) {
 		if (info.rule_cnt > 0) {
 			if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
-				rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+				rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
 						   GFP_USER);
 			if (!rule_buf)
 				return -ENOMEM;
@@ -397,7 +397,7 @@ static noinline_for_stack int ethtool_get_rxfh_indir(struct net_device *dev,
 	    (KMALLOC_MAX_SIZE - sizeof(*indir)) / sizeof(*indir->ring_index))
 		return -ENOMEM;
 	full_size = sizeof(*indir) + sizeof(*indir->ring_index) * table_size;
-	indir = kmalloc(full_size, GFP_USER);
+	indir = kzalloc(full_size, GFP_USER);
 	if (!indir)
 		return -ENOMEM;
 
@@ -538,7 +538,7 @@ static int ethtool_get_rx_ntuple(struct net_device *dev, void __user *useraddr)
 
 	gstrings.len = ret;
 
-	data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+	data = kzalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
 	if (!data)
 		return -ENOMEM;
 
@@ -775,7 +775,7 @@ static int ethtool_get_regs(struct net_device *dev, char __user *useraddr)
 	if (regs.len > reglen)
 		regs.len = reglen;
 
-	regbuf = kmalloc(reglen, GFP_USER);
+	regbuf = kzalloc(reglen, GFP_USER);
 	if (!regbuf)
 		return -ENOMEM;
 
diff --git a/net/core/stream.c b/net/core/stream.c
index d959e0f..f5df85d 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -141,10 +141,10 @@ int sk_stream_wait_memory(struct sock *sk, long *timeo_p)
 
 		set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
 		sk->sk_write_pending++;
-		sk_wait_event(sk, &current_timeo, !sk->sk_err &&
-						  !(sk->sk_shutdown & SEND_SHUTDOWN) &&
-						  sk_stream_memory_free(sk) &&
-						  vm_wait);
+		sk_wait_event(sk, &current_timeo, sk->sk_err ||
+						  (sk->sk_shutdown & SEND_SHUTDOWN) ||
+						  (sk_stream_memory_free(sk) &&
+						  !vm_wait));
 		sk->sk_write_pending--;
 
 		if (vm_wait) {
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 72380a3..7cd7760 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -413,7 +413,7 @@ config INET_XFRM_MODE_BEET
 	  If unsure, say Y.
 
 config INET_LRO
-	bool "Large Receive Offload (ipv4/tcp)"
+	tristate "Large Receive Offload (ipv4/tcp)"
 	default y
 	---help---
 	  Support for Large Receive Offload (ipv4/tcp).
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 1fdcacd..2a4bb76 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -834,7 +834,7 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 	int			mark = 0;
 
 
-	if (len == 8 || IGMP_V2_SEEN(in_dev)) {
+	if (len == 8) {
 		if (ih->code == 0) {
 			/* Alas, old v1 router presents here. */
 
@@ -856,6 +856,18 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 		igmpv3_clear_delrec(in_dev);
 	} else if (len < 12) {
 		return;	/* ignore bogus packet; freed by caller */
+	} else if (IGMP_V1_SEEN(in_dev)) {
+		/* This is a v3 query with v1 queriers present */
+		max_delay = IGMP_Query_Response_Interval;
+		group = 0;
+	} else if (IGMP_V2_SEEN(in_dev)) {
+		/* this is a v3 query with v2 queriers present;
+		 * Interpretation of the max_delay code is problematic here.
+		 * A real v2 host would use ih_code directly, while v3 has a
+		 * different encoding. We use the v3 encoding as more likely
+		 * to be intended in a v3 query.
+		 */
+		max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
 	} else { /* v3 */
 		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
 			return;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 8323136..a275c6e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1556,14 +1556,13 @@ out:
  *	i.e. Path MTU discovery
  */
 
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
-			struct net_device *dev, u32 pmtu)
+static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+			     struct net *net, u32 pmtu, int ifindex)
 {
 	struct rt6_info *rt, *nrt;
-	struct net *net = dev_net(dev);
 	int allfrag = 0;
 
-	rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0);
+	rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
 	if (rt == NULL)
 		return;
 
@@ -1631,6 +1630,27 @@ out:
 	dst_release(&rt->dst);
 }
 
+void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+			struct net_device *dev, u32 pmtu)
+{
+	struct net *net = dev_net(dev);
+
+	/*
+	 * RFC 1981 states that a node "MUST reduce the size of the packets it
+	 * is sending along the path" that caused the Packet Too Big message.
+	 * Since it's not possible in the general case to determine which
+	 * interface was used to send the original packet, we update the MTU
+	 * on the interface that will be used to send future packets. We also
+	 * update the MTU on the interface that received the Packet Too Big in
+	 * case the original packet was forced out that interface with
+	 * SO_BINDTODEVICE or similar. This is the next best thing to the
+	 * correct behaviour, which would be to update the MTU on all
+	 * interfaces.
+	 */
+	rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0);
+	rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex);
+}
+
 /*
  *	Misc support functions
  */
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index c893f23..8f23401 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -175,6 +175,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 
 	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
 
+	del_timer_sync(&tid_tx->addba_resp_timer);
+
 	/*
 	 * After this packets are no longer handed right through
 	 * to the driver but are put onto tid_tx->pending instead,
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 10caec5..34da679 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -377,7 +377,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 				skb2 = skb_clone(skb, GFP_ATOMIC);
 				if (skb2) {
 					skb2->dev = prev_dev;
-					netif_receive_skb(skb2);
+					netif_rx(skb2);
 				}
 			}
 
@@ -386,7 +386,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 	}
 	if (prev_dev) {
 		skb->dev = prev_dev;
-		netif_receive_skb(skb);
+		netif_rx(skb);
 		skb = NULL;
 	}
 	rcu_read_unlock();
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 7416a5c..b0c2a82 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -137,7 +137,7 @@ next_knode:
 			int toff = off + key->off + (off2 & key->offmask);
 			__be32 *data, _data;
 
-			if (skb_headroom(skb) + toff < 0)
+			if (skb_headroom(skb) + toff > INT_MAX)
 				goto out;
 
 			data = skb_header_pointer(skb, toff, 4, &_data);
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 8636639..ddbbf7c 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -543,16 +543,20 @@ struct sctp_hmac *sctp_auth_asoc_get_hmac(const struct sctp_association *asoc)
 		id = ntohs(hmacs->hmac_ids[i]);
 
 		/* Check the id is in the supported range */
-		if (id > SCTP_AUTH_HMAC_ID_MAX)
+		if (id > SCTP_AUTH_HMAC_ID_MAX) {
+			id = 0;
 			continue;
+		}
 
 		/* See is we support the id.  Supported IDs have name and
 		 * length fields set, so that we can allocated and use
 		 * them.  We can safely just check for name, for without the
 		 * name, we can't allocate the TFM.
 		 */
-		if (!sctp_hmac_list[id].hmac_name)
+		if (!sctp_hmac_list[id].hmac_name) {
+			id = 0;
 			continue;
+		}
 
 		break;
 	}
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index ca44917..fbb7077 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -916,6 +916,11 @@ SCTP_STATIC int sctp_setsockopt_bindx(struct sock* sk,
 	/* Walk through the addrs buffer and count the number of addresses. */
 	addr_buf = kaddrs;
 	while (walk_size < addrs_size) {
+		if (walk_size + sizeof(sa_family_t) > addrs_size) {
+			kfree(kaddrs);
+			return -EINVAL;
+		}
+
 		sa_addr = (struct sockaddr *)addr_buf;
 		af = sctp_get_af_specific(sa_addr->sa_family);
 
@@ -1002,9 +1007,13 @@ static int __sctp_connect(struct sock* sk,
 	/* Walk through the addrs buffer and count the number of addresses. */
 	addr_buf = kaddrs;
 	while (walk_size < addrs_size) {
+		if (walk_size + sizeof(sa_family_t) > addrs_size) {
+			err = -EINVAL;
+			goto out_free;
+		}
+
 		sa_addr = (union sctp_addr *)addr_buf;
 		af = sctp_get_af_specific(sa_addr->sa.sa_family);
-		port = ntohs(sa_addr->v4.sin_port);
 
 		/* If the address family is not supported or if this address
 		 * causes the address buffer to overflow return EINVAL.
@@ -1014,6 +1023,8 @@ static int __sctp_connect(struct sock* sk,
 			goto out_free;
 		}
 
+		port = ntohs(sa_addr->v4.sin_port);
+
 		/* Save current address so we can work with it */
 		memcpy(&to, sa_addr, af->sockaddr_len);
 
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 5b7c86e..7ef429c 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -427,7 +427,7 @@ static void check_conf(struct menu *menu)
 				if (sym->name && !sym_is_choice_value(sym)) {
 					printf("CONFIG_%s\n", sym->name);
 				}
-			} else {
+			} else if (input_mode != oldnoconfig) {
 				if (!conf_cnt++)
 					printf(_("*\n* Restart config...\n*\n"));
 				rootEntry = menu_get_parent_menu(menu);
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 6ee2e4f..170459c 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -165,7 +165,6 @@ struct menu {
 	struct symbol *sym;
 	struct property *prompt;
 	struct expr *dep;
-	struct expr *dir_dep;
 	unsigned int flags;
 	char *help;
 	struct file *file;
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 4fb5902..edda8b4 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -107,7 +107,6 @@ static struct expr *menu_check_dep(struct expr *e)
 void menu_add_dep(struct expr *dep)
 {
 	current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
-	current_entry->dir_dep = current_entry->dep;
 }
 
 void menu_set_type(int type)
@@ -291,10 +290,6 @@ void menu_finalize(struct menu *parent)
 		for (menu = parent->list; menu; menu = menu->next)
 			menu_finalize(menu);
 	} else if (sym) {
-		/* ignore inherited dependencies for dir_dep */
-		sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep));
-		sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr);
-
 		basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
 		basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
 		basedep = expr_eliminate_dups(expr_transform(basedep));
@@ -325,6 +320,8 @@ void menu_finalize(struct menu *parent)
 			parent->next = last_menu->next;
 			last_menu->next = NULL;
 		}
+
+		sym->dir_dep.expr = parent->dep;
 	}
 	for (menu = parent->list; menu; menu = menu->next) {
 		if (sym && sym_is_choice(sym) &&
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 943712c..1f8b305 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -350,6 +350,7 @@ void sym_calc_value(struct symbol *sym)
 				}
 			}
 		calc_newval:
+#if 0
 			if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
 				fprintf(stderr, "warning: (");
 				expr_fprint(sym->rev_dep.expr, stderr);
@@ -358,6 +359,7 @@ void sym_calc_value(struct symbol *sym)
 				expr_fprint(sym->dir_dep.expr, stderr);
 				fprintf(stderr, ")\n");
 			}
+#endif
 			newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
 		}
 		if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 92aa762..07f803e 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -391,11 +391,11 @@ static long sound_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case SND_DEV_DSP:
 	case SND_DEV_DSP16:
 	case SND_DEV_AUDIO:
-		return audio_ioctl(dev, file, cmd, p);
+		ret = audio_ioctl(dev, file, cmd, p);
 		break;
 
 	case SND_DEV_MIDIN:
-		return MIDIbuf_ioctl(dev, file, cmd, p);
+		ret = MIDIbuf_ioctl(dev, file, cmd, p);
 		break;
 
 	}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 95148e5..c16c5ba 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1747,6 +1747,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 		      "HP dv6", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3061,
 		      "HP dv6", STAC_HP_DV5), /* HP dv6-1110ax */
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x363e,
+		      "HP DV6", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ef7aa0a..95aaf56 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -73,6 +73,18 @@ void get_term_dimensions(struct winsize *ws);
 #define cpu_relax()	asm volatile("":::"memory")
 #endif
 
+#ifdef __mips__
+#include "../../arch/mips/include/asm/unistd.h"
+#define rmb()		asm volatile(					\
+				".set	mips2\n\t"			\
+				"sync\n\t"				\
+				".set	mips0"				\
+				: /* no output */			\
+				: /* no input */			\
+				: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>