Merge branch 'linus' into release

Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 54 insertions, 19 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7068d0b..d1b87d2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -44,6 +44,7 @@ parameter is applicable:
 	FB	The frame buffer device is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
+	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
@@ -507,11 +508,23 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64
 
+	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support
+			this option disables the debugging code at boot.
+
+	dma_debug_entries=<number>
+			This option allows to tune the number of preallocated
+			entries for DMA-API debugging code. One entry is
+			required per DMA-API allocation. Use this if the
+			DMA-API debugging code disables itself because the
+			architectural default is too low.
+
 	hpet=		[X86-32,HPET] option to control HPET usage
-			Format: { enable (default) | disable | force }
+			Format: { enable (default) | disable | force |
+				verbose }
 			disable: disable HPET and use PIT instead
 			force: allow force enabled of undocumented chips (ICH4,
 			VIA, nVidia)
+			verbose: show contents of HPET registers during setup
 
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
 			Format:
@@ -845,6 +858,15 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
+	hvc_iucv_allow=	[S390] Comma-separated list of z/VM user IDs.
+			       If specified, z/VM IUCV HVC accepts connections
+			       from listed z/VM user IDs only.
+
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
 
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
@@ -918,6 +940,15 @@ and is between 256 and 4096 characters. It is defined in the file
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
+	ima_audit=	[IMA]
+			Format: { "0" | "1" }
+			0 -- integrity auditing messages. (Default)
+			1 -- enable informational integrity auditing messages.
+
+	ima_hash=	[IMA]
+			Formt: { "sha1" | "md5" }
+			default: "sha1"
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -1326,8 +1357,13 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
-			range: 0,4 : pattern number
 			default : 0 <disable>
+			Specifies the number of memtest passes to be
+			performed. Each pass selects another test
+			pattern from a given set of patterns. Memtest
+			fills the memory with this pattern, validates
+			memory contents and reserves bad memory
+			regions that are detected.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.
@@ -1503,7 +1539,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
 
-	nohlt		[BUGS=ARM,SH]
+	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
+			wfi(ARM) instruction doesn't work correctly and not to
+			use it. This is also useful when using JTAG debugger.
 
 	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to
@@ -1583,7 +1621,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
 	noswapaccount	[KNL] Disable accounting of swap in memory resource
-			controller. (See Documentation/controllers/memory.txt)
+			controller. (See Documentation/cgroups/memory.txt)
 
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
@@ -1675,6 +1713,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			See also Documentation/blockdev/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
+		earlydump	[X86] dump PCI config space before the kernel
+			        changes anything
 		off		[X86] don't probe for the PCI bus
 		bios		[X86-32] force use of PCI BIOS, don't access
 				the hardware directly. Use this if your machine
@@ -1774,6 +1814,15 @@ and is between 256 and 4096 characters. It is defined in the file
 		cbmemsize=nn[KMG]	The fixed amount of bus space which is
 				reserved for the CardBus bridge's memory
 				window. The default value is 64 megabytes.
+		resource_alignment=
+				Format:
+				[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+				Specifies alignment and device to reassign
+				aligned memory resources.
+				If <order of align> is not specified,
+				PAGE_SIZE is used as alignment.
+				PCI-PCI bridge can be specified, if resource
+				windows need to be expanded.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -1832,11 +1881,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -1927,7 +1971,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cpusets.txt.
+			See Documentation/cgroups/cpusets.txt.
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
@@ -2025,15 +2069,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
-	selinux_compat_net =
-			[SELINUX] Set initial selinux_compat_net flag value.
-                        Format: { "0" | "1" }
-                        0 -- use new secmark-based packet controls
-                        1 -- use legacy packet controls
-                        Default value is 0 (preferred).
-                        Value can be changed at runtime via
-                        /selinux/compat_net.
-
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]