diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-09-24 01:52:47 -0400 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-09-24 01:52:47 -0400 |
commit | 23930fa1cebfea6f79881c588ccd1b0781e49e3f (patch) | |
tree | 36d29e3f83661c4f5f45b6f74ac0d5f9886867a8 /Documentation | |
parent | 36b35a5be0e4b406acd816e2122d153e875105be (diff) | |
parent | 4f5537de7c1531398e84e18a24f667e49cc94208 (diff) | |
download | kernel_samsung_aries-23930fa1cebfea6f79881c588ccd1b0781e49e3f.zip kernel_samsung_aries-23930fa1cebfea6f79881c588ccd1b0781e49e3f.tar.gz kernel_samsung_aries-23930fa1cebfea6f79881c588ccd1b0781e49e3f.tar.bz2 |
Merge branch 'master' into upstream
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/00-INDEX | 2 | ||||
-rw-r--r-- | Documentation/crypto/api-intro.txt | 36 | ||||
-rw-r--r-- | Documentation/kernel-parameters.txt | 2 | ||||
-rw-r--r-- | Documentation/netlabel/00-INDEX | 10 | ||||
-rw-r--r-- | Documentation/netlabel/cipso_ipv4.txt | 48 | ||||
-rw-r--r-- | Documentation/netlabel/draft-ietf-cipso-ipsecurity-01.txt | 791 | ||||
-rw-r--r-- | Documentation/netlabel/introduction.txt | 46 | ||||
-rw-r--r-- | Documentation/netlabel/lsm_interface.txt | 47 | ||||
-rw-r--r-- | Documentation/networking/ip-sysctl.txt | 38 | ||||
-rw-r--r-- | Documentation/networking/secid.txt | 14 | ||||
-rw-r--r-- | Documentation/scsi/ChangeLog.arcmsr | 56 | ||||
-rw-r--r-- | Documentation/scsi/aacraid.txt | 53 | ||||
-rw-r--r-- | Documentation/scsi/arcmsr_spec.txt | 574 | ||||
-rw-r--r-- | Documentation/scsi/libsas.txt | 484 | ||||
-rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 44 | ||||
-rw-r--r-- | Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 5 |
16 files changed, 2203 insertions, 47 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 5f7f7d7..02457ec 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -184,6 +184,8 @@ mtrr.txt - how to use PPro Memory Type Range Registers to increase performance. nbd.txt - info on a TCP implementation of a network block device. +netlabel/ + - directory with information on the NetLabel subsystem. networking/ - directory with info on various aspects of networking with Linux. nfsroot.txt diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.txt index 74dffc6..5a03a28 100644 --- a/Documentation/crypto/api-intro.txt +++ b/Documentation/crypto/api-intro.txt @@ -19,15 +19,14 @@ At the lowest level are algorithms, which register dynamically with the API. 'Transforms' are user-instantiated objects, which maintain state, handle all -of the implementation logic (e.g. manipulating page vectors), provide an -abstraction to the underlying algorithms, and handle common logical -operations (e.g. cipher modes, HMAC for digests). However, at the user +of the implementation logic (e.g. manipulating page vectors) and provide an +abstraction to the underlying algorithms. However, at the user level they are very simple. Conceptually, the API layering looks like this: [transform api] (user interface) - [transform ops] (per-type logic glue e.g. cipher.c, digest.c) + [transform ops] (per-type logic glue e.g. cipher.c, compress.c) [algorithm api] (for registering algorithms) The idea is to make the user interface and algorithm registration API @@ -44,22 +43,27 @@ under development. Here's an example of how to use the API: #include <linux/crypto.h> + #include <linux/err.h> + #include <linux/scatterlist.h> struct scatterlist sg[2]; char result[128]; - struct crypto_tfm *tfm; + struct crypto_hash *tfm; + struct hash_desc desc; - tfm = crypto_alloc_tfm("md5", 0); - if (tfm == NULL) + tfm = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm)) fail(); /* ... set up the scatterlists ... */ + + desc.tfm = tfm; + desc.flags = 0; - crypto_digest_init(tfm); - crypto_digest_update(tfm, &sg, 2); - crypto_digest_final(tfm, result); + if (crypto_hash_digest(&desc, &sg, 2, result)) + fail(); - crypto_free_tfm(tfm); + crypto_free_hash(tfm); Many real examples are available in the regression test module (tcrypt.c). @@ -126,7 +130,7 @@ might already be working on. BUGS Send bug reports to: -James Morris <jmorris@redhat.com> +Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@redhat.com> @@ -134,13 +138,14 @@ FURTHER INFORMATION For further patches and various updates, including the current TODO list, see: -http://samba.org/~jamesm/crypto/ +http://gondor.apana.org.au/~herbert/crypto/ AUTHORS James Morris David S. Miller +Herbert Xu CREDITS @@ -238,8 +243,11 @@ Anubis algorithm contributors: Tiger algorithm contributors: Aaron Grothe +VIA PadLock contributors: + Michal Ludvig + Generic scatterwalk code by Adam J. Richter <adam@yggdrasil.com> Please send any credits updates or corrections to: -James Morris <jmorris@redhat.com> +Herbert Xu <herbert@gondor.apana.org.au> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 87a1733..71d05f4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1189,8 +1189,6 @@ running once the system is up. Mechanism 2. nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI Configuration - mmconf [IA-32,X86_64] Force MMCONFIG. This is useful - to override the builtin blacklist. nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to disable the use of MSI interrupts system-wide. diff --git a/Documentation/netlabel/00-INDEX b/Documentation/netlabel/00-INDEX new file mode 100644 index 0000000..837bf35 --- /dev/null +++ b/Documentation/netlabel/00-INDEX @@ -0,0 +1,10 @@ +00-INDEX + - this file. +cipso_ipv4.txt + - documentation on the IPv4 CIPSO protocol engine. +draft-ietf-cipso-ipsecurity-01.txt + - IETF draft of the CIPSO protocol, dated 16 July 1992. +introduction.txt + - NetLabel introduction, READ THIS FIRST. +lsm_interface.txt + - documentation on the NetLabel kernel security module API. diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt new file mode 100644 index 0000000..93dacb1 --- /dev/null +++ b/Documentation/netlabel/cipso_ipv4.txt @@ -0,0 +1,48 @@ +NetLabel CIPSO/IPv4 Protocol Engine +============================================================================== +Paul Moore, paul.moore@hp.com + +May 17, 2006 + + * Overview + +The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial IP +Security Option (CIPSO) draft from July 16, 1992. A copy of this draft can be +found in this directory, consult '00-INDEX' for the filename. While the IETF +draft never made it to an RFC standard it has become a de-facto standard for +labeled networking and is used in many trusted operating systems. + + * Outbound Packet Processing + +The CIPSO/IPv4 protocol engine applies the CIPSO IP option to packets by +adding the CIPSO label to the socket. This causes all packets leaving the +system through the socket to have the CIPSO IP option applied. The socket's +CIPSO label can be changed at any point in time, however, it is recommended +that it is set upon the socket's creation. The LSM can set the socket's CIPSO +label by using the NetLabel security module API; if the NetLabel "domain" is +configured to use CIPSO for packet labeling then a CIPSO IP option will be +generated and attached to the socket. + + * Inbound Packet Processing + +The CIPSO/IPv4 protocol engine validates every CIPSO IP option it finds at the +IP layer without any special handling required by the LSM. However, in order +to decode and translate the CIPSO label on the packet the LSM must use the +NetLabel security module API to extract the security attributes of the packet. +This is typically done at the socket layer using the 'socket_sock_rcv_skb()' +LSM hook. + + * Label Translation + +The CIPSO/IPv4 protocol engine contains a mechanism to translate CIPSO security +attributes such as sensitivity level and category to values which are +appropriate for the host. These mappings are defined as part of a CIPSO +Domain Of Interpretation (DOI) definition and are configured through the +NetLabel user space communication layer. Each DOI definition can have a +different security attribute mapping table. + + * Label Translation Cache + +The NetLabel system provides a framework for caching security attribute +mappings from the network labels to the corresponding LSM identifiers. The +CIPSO/IPv4 protocol engine supports this caching mechanism. diff --git a/Documentation/netlabel/draft-ietf-cipso-ipsecurity-01.txt b/Documentation/netlabel/draft-ietf-cipso-ipsecurity-01.txt new file mode 100644 index 0000000..256c2c9 --- /dev/null +++ b/Documentation/netlabel/draft-ietf-cipso-ipsecurity-01.txt @@ -0,0 +1,791 @@ +IETF CIPSO Working Group +16 July, 1992 + + + + COMMERCIAL IP SECURITY OPTION (CIPSO 2.2) + + + +1. Status + +This Internet Draft provides the high level specification for a Commercial +IP Security Option (CIPSO). This draft reflects the version as approved by +the CIPSO IETF Working Group. Distribution of this memo is unlimited. + +This document is an Internet Draft. Internet Drafts are working documents +of the Internet Engineering Task Force (IETF), its Areas, and its Working +Groups. Note that other groups may also distribute working documents as +Internet Drafts. + +Internet Drafts are draft documents valid for a maximum of six months. +Internet Drafts may be updated, replaced, or obsoleted by other documents +at any time. It is not appropriate to use Internet Drafts as reference +material or to cite them other than as a "working draft" or "work in +progress." + +Please check the I-D abstract listing contained in each Internet Draft +directory to learn the current status of this or any other Internet Draft. + + + + +2. Background + +Currently the Internet Protocol includes two security options. One of +these options is the DoD Basic Security Option (BSO) (Type 130) which allows +IP datagrams to be labeled with security classifications. This option +provides sixteen security classifications and a variable number of handling +restrictions. To handle additional security information, such as security +categories or compartments, another security option (Type 133) exists and +is referred to as the DoD Extended Security Option (ESO). The values for +the fixed fields within these two options are administered by the Defense +Information Systems Agency (DISA). + +Computer vendors are now building commercial operating systems with +mandatory access controls and multi-level security. These systems are +no longer built specifically for a particular group in the defense or +intelligence communities. They are generally available commercial systems +for use in a variety of government and civil sector environments. + +The small number of ESO format codes can not support all the possible +applications of a commercial security option. The BSO and ESO were +designed to only support the United States DoD. CIPSO has been designed +to support multiple security policies. This Internet Draft provides the +format and procedures required to support a Mandatory Access Control +security policy. Support for additional security policies shall be +defined in future RFCs. + + + + +Internet Draft, Expires 15 Jan 93 [PAGE 1] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + + +3. CIPSO Format + +Option type: 134 (Class 0, Number 6, Copy on Fragmentation) +Option length: Variable + +This option permits security related information to be passed between +systems within a single Domain of Interpretation (DOI). A DOI is a +collection of systems which agree on the meaning of particular values +in the security option. An authority that has been assigned a DOI +identifier will define a mapping between appropriate CIPSO field values +and their human readable equivalent. This authority will distribute that +mapping to hosts within the authority's domain. These mappings may be +sensitive, therefore a DOI authority is not required to make these +mappings available to anyone other than the systems that are included in +the DOI. + +This option MUST be copied on fragmentation. This option appears at most +once in a datagram. All multi-octet fields in the option are defined to be +transmitted in network byte order. The format of this option is as follows: + ++----------+----------+------//------+-----------//---------+ +| 10000110 | LLLLLLLL | DDDDDDDDDDDD | TTTTTTTTTTTTTTTTTTTT | ++----------+----------+------//------+-----------//---------+ + + TYPE=134 OPTION DOMAIN OF TAGS + LENGTH INTERPRETATION + + + Figure 1. CIPSO Format + + +3.1 Type + +This field is 1 octet in length. Its value is 134. + + +3.2 Length + +This field is 1 octet in length. It is the total length of the option +including the type and length fields. With the current IP header length +restriction of 40 octets the value of this field MUST not exceed 40. + + +3.3 Domain of Interpretation Identifier + +This field is an unsigned 32 bit integer. The value 0 is reserved and MUST +not appear as the DOI identifier in any CIPSO option. Implementations +should assume that the DOI identifier field is not aligned on any particular +byte boundary. + +To conserve space in the protocol, security levels and categories are +represented by numbers rather than their ASCII equivalent. This requires +a mapping table within CIPSO hosts to map these numbers to their +corresponding ASCII representations. Non-related groups of systems may + + + +Internet Draft, Expires 15 Jan 93 [PAGE 2] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +have their own unique mappings. For example, one group of systems may +use the number 5 to represent Unclassified while another group may use the +number 1 to represent that same security level. The DOI identifier is used +to identify which mapping was used for the values within the option. + + +3.4 Tag Types + +A common format for passing security related information is necessary +for interoperability. CIPSO uses sets of "tags" to contain the security +information relevant to the data in the IP packet. Each tag begins with +a tag type identifier followed by the length of the tag and ends with the +actual security information to be passed. All multi-octet fields in a tag +are defined to be transmitted in network byte order. Like the DOI +identifier field in the CIPSO header, implementations should assume that +all tags, as well as fields within a tag, are not aligned on any particular +octet boundary. The tag types defined in this document contain alignment +bytes to assist alignment of some information, however alignment can not +be guaranteed if CIPSO is not the first IP option. + +CIPSO tag types 0 through 127 are reserved for defining standard tag +formats. Their definitions will be published in RFCs. Tag types whose +identifiers are greater than 127 are defined by the DOI authority and may +only be meaningful in certain Domains of Interpretation. For these tag +types, implementations will require the DOI identifier as well as the tag +number to determine the security policy and the format associated with the +tag. Use of tag types above 127 are restricted to closed networks where +interoperability with other networks will not be an issue. Implementations +that support a tag type greater than 127 MUST support at least one DOI that +requires only tag types 1 to 127. + +Tag type 0 is reserved. Tag types 1, 2, and 5 are defined in this +Internet Draft. Types 3 and 4 are reserved for work in progress. +The standard format for all current and future CIPSO tags is shown below: + ++----------+----------+--------//--------+ +| TTTTTTTT | LLLLLLLL | IIIIIIIIIIIIIIII | ++----------+----------+--------//--------+ + TAG TAG TAG + TYPE LENGTH INFORMATION + + Figure 2: Standard Tag Format + +In the three tag types described in this document, the length and count +restrictions are based on the current IP limitation of 40 octets for all +IP options. If the IP header is later expanded, then the length and count +restrictions specified in this document may increase to use the full area +provided for IP options. + + +3.4.1 Tag Type Classes + +Tag classes consist of tag types that have common processing requirements +and support the same security policy. The three tags defined in this +Internet Draft belong to the Mandatory Access Control (MAC) Sensitivity + + + +Internet Draft, Expires 15 Jan 93 [PAGE 3] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +class and support the MAC Sensitivity security policy. + + +3.4.2 Tag Type 1 + +This is referred to as the "bit-mapped" tag type. Tag type 1 is included +in the MAC Sensitivity tag type class. The format of this tag type is as +follows: + ++----------+----------+----------+----------+--------//---------+ +| 00000001 | LLLLLLLL | 00000000 | LLLLLLLL | CCCCCCCCCCCCCCCCC | ++----------+----------+----------+----------+--------//---------+ + + TAG TAG ALIGNMENT SENSITIVITY BIT MAP OF + TYPE LENGTH OCTET LEVEL CATEGORIES + + Figure 3. Tag Type 1 Format + + +3.4.2.1 Tag Type + +This field is 1 octet in length and has a value of 1. + + +3.4.2.2 Tag Length + +This field is 1 octet in length. It is the total length of the tag type +including the type and length fields. With the current IP header length +restriction of 40 bytes the value within this field is between 4 and 34. + + +3.4.2.3 Alignment Octet + +This field is 1 octet in length and always has the value of 0. Its purpose +is to align the category bitmap field on an even octet boundary. This will +speed many implementations including router implementations. + + +3.4.2.4 Sensitivity Level + +This field is 1 octet in length. Its value is from 0 to 255. The values +are ordered with 0 being the minimum value and 255 representing the maximum +value. + + +3.4.2.5 Bit Map of Categories + +The length of this field is variable and ranges from 0 to 30 octets. This +provides representation of categories 0 to 239. The ordering of the bits +is left to right or MSB to LSB. For example category 0 is represented by +the most significant bit of the first byte and category 15 is represented +by the least significant bit of the second byte. Figure 4 graphically +shows this ordering. Bit N is binary 1 if category N is part of the label +for the datagram, and bit N is binary 0 if category N is not part of the +label. Except for the optimized tag 1 format described in the next section, + + + +Internet Draft, Expires 15 Jan 93 [PAGE 4] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +minimal encoding SHOULD be used resulting in no trailing zero octets in the +category bitmap. + + octet 0 octet 1 octet 2 octet 3 octet 4 octet 5 + XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX . . . +bit 01234567 89111111 11112222 22222233 33333333 44444444 +number 012345 67890123 45678901 23456789 01234567 + + Figure 4. Ordering of Bits in Tag 1 Bit Map + + +3.4.2.6 Optimized Tag 1 Format + +Routers work most efficiently when processing fixed length fields. To +support these routers there is an optimized form of tag type 1. The format +does not change. The only change is to the category bitmap which is set to +a constant length of 10 octets. Trailing octets required to fill out the 10 +octets are zero filled. Ten octets, allowing for 80 categories, was chosen +because it makes the total length of the CIPSO option 20 octets. If CIPSO +is the only option then the option will be full word aligned and additional +filler octets will not be required. + + +3.4.3 Tag Type 2 + +This is referred to as the "enumerated" tag type. It is used to describe +large but sparsely populated sets of categories. Tag type 2 is in the MAC +Sensitivity tag type class. The format of this tag type is as follows: + ++----------+----------+----------+----------+-------------//-------------+ +| 00000010 | LLLLLLLL | 00000000 | LLLLLLLL | CCCCCCCCCCCCCCCCCCCCCCCCCC | ++----------+----------+----------+----------+-------------//-------------+ + + TAG TAG ALIGNMENT SENSITIVITY ENUMERATED + TYPE LENGTH OCTET LEVEL CATEGORIES + + Figure 5. Tag Type 2 Format + + +3.4.3.1 Tag Type + +This field is one octet in length and has a value of 2. + + +3.4.3.2 Tag Length + +This field is 1 octet in length. It is the total length of the tag type +including the type and length fields. With the current IP header length +restriction of 40 bytes the value within this field is between 4 and 34. + + +3.4.3.3 Alignment Octet + +This field is 1 octet in length and always has the value of 0. Its purpose +is to align the category field on an even octet boundary. This will + + + +Internet Draft, Expires 15 Jan 93 [PAGE 5] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +speed many implementations including router implementations. + + +3.4.3.4 Sensitivity Level + +This field is 1 octet in length. Its value is from 0 to 255. The values +are ordered with 0 being the minimum value and 255 representing the +maximum value. + + +3.4.3.5 Enumerated Categories + +In this tag, categories are represented by their actual value rather than +by their position within a bit field. The length of each category is 2 +octets. Up to 15 categories may be represented by this tag. Valid values +for categories are 0 to 65534. Category 65535 is not a valid category +value. The categories MUST be listed in ascending order within the tag. + + +3.4.4 Tag Type 5 + +This is referred to as the "range" tag type. It is used to represent +labels where all categories in a range, or set of ranges, are included +in the sensitivity label. Tag type 5 is in the MAC Sensitivity tag type +class. The format of this tag type is as follows: + ++----------+----------+----------+----------+------------//-------------+ +| 00000101 | LLLLLLLL | 00000000 | LLLLLLLL | Top/Bottom | Top/Bottom | ++----------+----------+----------+----------+------------//-------------+ + + TAG TAG ALIGNMENT SENSITIVITY CATEGORY RANGES + TYPE LENGTH OCTET LEVEL + + Figure 6. Tag Type 5 Format + + +3.4.4.1 Tag Type + +This field is one octet in length and has a value of 5. + + +3.4.4.2 Tag Length + +This field is 1 octet in length. It is the total length of the tag type +including the type and length fields. With the current IP header length +restriction of 40 bytes the value within this field is between 4 and 34. + + +3.4.4.3 Alignment Octet + +This field is 1 octet in length and always has the value of 0. Its purpose +is to align the category range field on an even octet boundary. This will +speed many implementations including router implementations. + + + + + +Internet Draft, Expires 15 Jan 93 [PAGE 6] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +3.4.4.4 Sensitivity Level + +This field is 1 octet in length. Its value is from 0 to 255. The values +are ordered with 0 being the minimum value and 255 representing the maximum +value. + + +3.4.4.5 Category Ranges + +A category range is a 4 octet field comprised of the 2 octet index of the +highest numbered category followed by the 2 octet index of the lowest +numbered category. These range endpoints are inclusive within the range of +categories. All categories within a range are included in the sensitivity +label. This tag may contain a maximum of 7 category pairs. The bottom +category endpoint for the last pair in the tag MAY be omitted and SHOULD be +assumed to be 0. The ranges MUST be non-overlapping and be listed in +descending order. Valid values for categories are 0 to 65534. Category +65535 is not a valid category value. + + +3.4.5 Minimum Requirements + +A CIPSO implementation MUST be capable of generating at least tag type 1 in +the non-optimized form. In addition, a CIPSO implementation MUST be able +to receive any valid tag type 1 even those using the optimized tag type 1 +format. + + +4. Configuration Parameters + +The configuration parameters defined below are required for all CIPSO hosts, +gateways, and routers that support multiple sensitivity labels. A CIPSO +host is defined to be the origination or destination system for an IP +datagram. A CIPSO gateway provides IP routing services between two or more +IP networks and may be required to perform label translations between +networks. A CIPSO gateway may be an enhanced CIPSO host or it may just +provide gateway services with no end system CIPSO capabilities. A CIPSO +router is a dedicated IP router that routes IP datagrams between two or more +IP networks. + +An implementation of CIPSO on a host MUST have the capability to reject a +datagram for reasons that the information contained can not be adequately +protected by the receiving host or if acceptance may result in violation of +the host or network security policy. In addition, a CIPSO gateway or router +MUST be able to reject datagrams going to networks that can not provide +adequate protection or may violate the network's security policy. To +provide this capability the following minimal set of configuration +parameters are required for CIPSO implementations: + +HOST_LABEL_MAX - This parameter contains the maximum sensitivity label that +a CIPSO host is authorized to handle. All datagrams that have a label +greater than this maximum MUST be rejected by the CIPSO host. This +parameter does not apply to CIPSO gateways or routers. This parameter need +not be defined explicitly as it can be implicitly derived from the +PORT_LABEL_MAX parameters for the associated interfaces. + + + +Internet Draft, Expires 15 Jan 93 [PAGE 7] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + + +HOST_LABEL_MIN - This parameter contains the minimum sensitivity label that +a CIPSO host is authorized to handle. All datagrams that have a label less +than this minimum MUST be rejected by the CIPSO host. This parameter does +not apply to CIPSO gateways or routers. This parameter need not be defined +explicitly as it can be implicitly derived from the PORT_LABEL_MIN +parameters for the associated interfaces. + +PORT_LABEL_MAX - This parameter contains the maximum sensitivity label for +all datagrams that may exit a particular network interface port. All +outgoing datagrams that have a label greater than this maximum MUST be +rejected by the CIPSO system. The label within this parameter MUST be +less than or equal to the label within the HOST_LABEL_MAX parameter. This +parameter does not apply to CIPSO hosts that support only one network port. + +PORT_LABEL_MIN - This parameter contains the minimum sensitivity label for +all datagrams that may exit a particular network interface port. All +outgoing datagrams that have a label less than this minimum MUST be +rejected by the CIPSO system. The label within this parameter MUST be +greater than or equal to the label within the HOST_LABEL_MIN parameter. +This parameter does not apply to CIPSO hosts that support only one network +port. + +PORT_DOI - This parameter is used to assign a DOI identifier value to a +particular network interface port. All CIPSO labels within datagrams +going out this port MUST use the specified DOI identifier. All CIPSO +hosts and gateways MUST support either this parameter, the NET_DOI +parameter, or the HOST_DOI parameter. + +NET_DOI - This parameter is used to assign a DOI identifier value to a +particular IP network address. All CIPSO labels within datagrams destined +for the particular IP network MUST use the specified DOI identifier. All +CIPSO hosts and gateways MUST support either this parameter, the PORT_DOI +parameter, or the HOST_DOI parameter. + +HOST_DOI - This parameter is used to assign a DOI identifier value to a +particular IP host address. All CIPSO labels within datagrams destined for +the particular IP host will use the specified DOI identifier. All CIPSO +hosts and gateways MUST support either this parameter, the PORT_DOI +parameter, or the NET_DOI parameter. + +This list represents the minimal set of configuration parameters required +to be compliant. Implementors are encouraged to add to this list to +provide enhanced functionality and control. For example, many security +policies may require both incoming and outgoing datagrams be checked against +the port and host label ranges. + + +4.1 Port Range Parameters + +The labels represented by the PORT_LABEL_MAX and PORT_LABEL_MIN parameters +MAY be in CIPSO or local format. Some CIPSO systems, such as routers, may +want to have the range parameters expressed in CIPSO format so that incoming +labels do not have to be converted to a local format before being compared +against the range. If multiple DOIs are supported by one of these CIPSO + + + +Internet Draft, Expires 15 Jan 93 [PAGE 8] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +systems then multiple port range parameters would be needed, one set for +each DOI supported on a particular port. + +The port range will usually represent the total set of labels that may +exist on the logical network accessed through the corresponding network +interface. It may, however, represent a subset of these labels that are +allowed to enter the CIPSO system. + + +4.2 Single Label CIPSO Hosts + +CIPSO implementations that support only one label are not required to +support the parameters described above. These limited implementations are +only required to support a NET_LABEL parameter. This parameter contains +the CIPSO label that may be inserted in datagrams that exit the host. In +addition, the host MUST reject any incoming datagram that has a label which +is not equivalent to the NET_LABEL parameter. + + +5. Handling Procedures + +This section describes the processing requirements for incoming and +outgoing IP datagrams. Just providing the correct CIPSO label format +is not enough. Assumptions will be made by one system on how a +receiving system will handle the CIPSO label. Wrong assumptions may +lead to non-interoperability or even a security incident. The +requirements described below represent the minimal set needed for +interoperability and that provide users some level of confidence. +Many other requirements could be added to increase user confidence, +however at the risk of restricting creativity and limiting vendor +participation. + + +5.1 Input Procedures + +All datagrams received through a network port MUST have a security label +associated with them, either contained in the datagram or assigned to the +receiving port. Without this label the host, gateway, or router will not +have the information it needs to make security decisions. This security +label will be obtained from the CIPSO if the option is present in the +datagram. See section 4.1.2 for handling procedures for unlabeled +datagrams. This label will be compared against the PORT (if appropriate) +and HOST configuration parameters defined in section 3. + +If any field within the CIPSO option, such as the DOI identifier, is not +recognized the IP datagram is discarded and an ICMP "parameter problem" +(type 12) is generated and returned. The ICMP code field is set to "bad +parameter" (code 0) and the pointer is set to the start of the CIPSO field +that is unrecognized. + +If the contents of the CIPSO are valid but the security label is +outside of the configured host or port label range, the datagram is +discarded and an ICMP "destination unreachable" (type 3) is generated +and returned. The code field of the ICMP is set to "communication with +destination network administratively prohibited" (code 9) or to + + + +Internet Draft, Expires 15 Jan 93 [PAGE 9] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +"communication with destination host administratively prohibited" +(code 10). The value of the code field used is dependent upon whether +the originator of the ICMP message is acting as a CIPSO host or a CIPSO +gateway. The recipient of the ICMP message MUST be able to handle either +value. The same procedure is performed if a CIPSO can not be added to an +IP packet because it is too large to fit in the IP options area. + +If the error is triggered by receipt of an ICMP message, the message +is discarded and no response is permitted (consistent with general ICMP +processing rules). + + +5.1.1 Unrecognized tag types + +The default condition for any CIPSO implementation is that an +unrecognized tag type MUST be treated as a "parameter problem" and +handled as described in section 4.1. A CIPSO implementation MAY allow +the system administrator to identify tag types that may safely be +ignored. This capability is an allowable enhancement, not a +requirement. + + +5.1.2 Unlabeled Packets + +A network port may be configured to not require a CIPSO label for all +incoming datagrams. For this configuration a CIPSO label must be +assigned to that network port and associated with all unlabeled IP +datagrams. This capability might be used for single level networks or +networks that have CIPSO and non-CIPSO hosts and the non-CIPSO hosts +all operate at the same label. + +If a CIPSO option is required and none is found, the datagram is +discarded and an ICMP "parameter problem" (type 12) is generated and +returned to the originator of the datagram. The code field of the ICMP +is set to "option missing" (code 1) and the ICMP pointer is set to 134 +(the value of the option type for the missing CIPSO option). + + +5.2 Output Procedures + +A CIPSO option MUST appear only once in a datagram. Only one tag type +from the MAC Sensitivity class MAY be included in a CIPSO option. Given +the current set of defined tag types, this means that CIPSO labels at +first will contain only one tag. + +All datagrams leaving a CIPSO system MUST meet the following condition: + + PORT_LABEL_MIN <= CIPSO label <= PORT_LABEL_MAX + +If this condition is not satisfied the datagram MUST be discarded. +If the CIPSO system only supports one port, the HOST_LABEL_MIN and the +HOST_LABEL_MAX parameters MAY be substituted for the PORT parameters in +the above condition. + +The DOI identifier to be used for all outgoing datagrams is configured by + + + +Internet Draft, Expires 15 Jan 93 [PAGE 10] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + +the administrator. If port level DOI identifier assignment is used, then +the PORT_DOI configuration parameter MUST contain the DOI identifier to +use. If network level DOI assignment is used, then the NET_DOI parameter +MUST contain the DOI identifier to use. And if host level DOI assignment +is employed, then the HOST_DOI parameter MUST contain the DOI identifier +to use. A CIPSO implementation need only support one level of DOI +assignment. + + +5.3 DOI Processing Requirements + +A CIPSO implementation MUST support at least one DOI and SHOULD support +multiple DOIs. System and network administrators are cautioned to +ensure that at least one DOI is common within an IP network to allow for +broadcasting of IP datagrams. + +CIPSO gateways MUST be capable of translating a CIPSO option from one +DOI to another when forwarding datagrams between networks. For +efficiency purposes this capability is only a desired feature for CIPSO +routers. + + +5.4 Label of ICMP Messages + +The CIPSO label to be used on all outgoing ICMP messages MUST be equivalent +to the label of the datagram that caused the ICMP message. If the ICMP was +generated due to a problem associated with the original CIPSO label then the +following responses are allowed: + + a. Use the CIPSO label of the original IP datagram + b. Drop the original datagram with no return message generated + +In most cases these options will have the same effect. If you can not +interpret the label or if it is outside the label range of your host or +interface then an ICMP message with the same label will probably not be +able to exit the system. + + +6. Assignment of DOI Identifier Numbers = + +Requests for assignment of a DOI identifier number should be addressed to +the Internet Assigned Numbers Authority (IANA). + + +7. Acknowledgements + +Much of the material in this RFC is based on (and copied from) work +done by Gary Winiger of Sun Microsystems and published as Commercial +IP Security Option at the INTEROP 89, Commercial IPSO Workshop. + + +8. Author's Address + +To submit mail for distribution to members of the IETF CIPSO Working +Group, send mail to: cipso@wdl1.wdl.loral.com. + + + +Internet Draft, Expires 15 Jan 93 [PAGE 11] + + + +CIPSO INTERNET DRAFT 16 July, 1992 + + + + +To be added to or deleted from this distribution, send mail to: +cipso-request@wdl1.wdl.loral.com. + + +9. References + +RFC 1038, "Draft Revised IP Security Option", M. St. Johns, IETF, January +1988. + +RFC 1108, "U.S. Department of Defense Security Options +for the Internet Protocol", Stephen Kent, IAB, 1 March, 1991. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Internet Draft, Expires 15 Jan 93 [PAGE 12] + + + diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt new file mode 100644 index 0000000..a4ffba1 --- /dev/null +++ b/Documentation/netlabel/introduction.txt @@ -0,0 +1,46 @@ +NetLabel Introduction +============================================================================== +Paul Moore, paul.moore@hp.com + +August 2, 2006 + + * Overview + +NetLabel is a mechanism which can be used by kernel security modules to attach +security attributes to outgoing network packets generated from user space +applications and read security attributes from incoming network packets. It +is composed of three main components, the protocol engines, the communication +layer, and the kernel security module API. + + * Protocol Engines + +The protocol engines are responsible for both applying and retrieving the +network packet's security attributes. If any translation between the network +security attributes and those on the host are required then the protocol +engine will handle those tasks as well. Other kernel subsystems should +refrain from calling the protocol engines directly, instead they should use +the NetLabel kernel security module API described below. + +Detailed information about each NetLabel protocol engine can be found in this +directory, consult '00-INDEX' for filenames. + + * Communication Layer + +The communication layer exists to allow NetLabel configuration and monitoring +from user space. The NetLabel communication layer uses a message based +protocol built on top of the Generic NETLINK transport mechanism. The exact +formatting of these NetLabel messages as well as the Generic NETLINK family +names can be found in the the 'net/netlabel/' directory as comments in the +header files as well as in 'include/net/netlabel.h'. + + * Security Module API + +The purpose of the NetLabel security module API is to provide a protocol +independent interface to the underlying NetLabel protocol engines. In addition +to protocol independence, the security module API is designed to be completely +LSM independent which should allow multiple LSMs to leverage the same code +base. + +Detailed information about the NetLabel security module API can be found in the +'include/net/netlabel.h' header file as well as the 'lsm_interface.txt' file +found in this directory. diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt new file mode 100644 index 0000000..98dd9f7 --- /dev/null +++ b/Documentation/netlabel/lsm_interface.txt @@ -0,0 +1,47 @@ +NetLabel Linux Security Module Interface +============================================================================== +Paul Moore, paul.moore@hp.com + +May 17, 2006 + + * Overview + +NetLabel is a mechanism which can set and retrieve security attributes from +network packets. It is intended to be used by LSM developers who want to make +use of a common code base for several different packet labeling protocols. +The NetLabel security module API is defined in 'include/net/netlabel.h' but a +brief overview is given below. + + * NetLabel Security Attributes + +Since NetLabel supports multiple different packet labeling protocols and LSMs +it uses the concept of security attributes to refer to the packet's security +labels. The NetLabel security attributes are defined by the +'netlbl_lsm_secattr' structure in the NetLabel header file. Internally the +NetLabel subsystem converts the security attributes to and from the correct +low-level packet label depending on the NetLabel build time and run time +configuration. It is up to the LSM developer to translate the NetLabel +security attributes into whatever security identifiers are in use for their +particular LSM. + + * NetLabel LSM Protocol Operations + +These are the functions which allow the LSM developer to manipulate the labels +on outgoing packets as well as read the labels on incoming packets. Functions +exist to operate both on sockets as well as the sk_buffs directly. These high +level functions are translated into low level protocol operations based on how +the administrator has configured the NetLabel subsystem. + + * NetLabel Label Mapping Cache Operations + +Depending on the exact configuration, translation between the network packet +label and the internal LSM security identifier can be time consuming. The +NetLabel label mapping cache is a caching mechanism which can be used to +sidestep much of this overhead once a mapping has been established. Once the +LSM has received a packet, used NetLabel to decode it's security attributes, +and translated the security attributes into a LSM internal identifier the LSM +can use the NetLabel caching functions to associate the LSM internal +identifier with the network packet's label. This means that in the future +when a incoming packet matches a cached value not only are the internal +NetLabel translation mechanisms bypassed but the LSM translation mechanisms are +bypassed as well which should result in a significant reduction in overhead. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 90ed781..935e298 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -375,6 +375,41 @@ tcp_slow_start_after_idle - BOOLEAN be timed out after an idle period. Default: 1 +CIPSOv4 Variables: + +cipso_cache_enable - BOOLEAN + If set, enable additions to and lookups from the CIPSO label mapping + cache. If unset, additions are ignored and lookups always result in a + miss. However, regardless of the setting the cache is still + invalidated when required when means you can safely toggle this on and + off and the cache will always be "safe". + Default: 1 + +cipso_cache_bucket_size - INTEGER + The CIPSO label cache consists of a fixed size hash table with each + hash bucket containing a number of cache entries. This variable limits + the number of entries in each hash bucket; the larger the value the + more CIPSO label mappings that can be cached. When the number of + entries in a given hash bucket reaches this limit adding new entries + causes the oldest entry in the bucket to be removed to make room. + Default: 10 + +cipso_rbm_optfmt - BOOLEAN + Enable the "Optimized Tag 1 Format" as defined in section 3.4.2.6 of + the CIPSO draft specification (see Documentation/netlabel for details). + This means that when set the CIPSO tag will be padded with empty + categories in order to make the packet data 32-bit aligned. + Default: 0 + +cipso_rbm_structvalid - BOOLEAN + If set, do a very strict check of the CIPSO option when + ip_options_compile() is called. If unset, relax the checks done during + ip_options_compile(). Either way is "safe" as errors are caught else + where in the CIPSO processing code but setting this to 0 (False) should + result in less work (i.e. it should be faster) but could cause problems + with other implementations that require strict checking. + Default: 0 + IP Variables: ip_local_port_range - 2 INTEGERS @@ -730,6 +765,9 @@ conf/all/forwarding - BOOLEAN This referred to as global forwarding. +proxy_ndp - BOOLEAN + Do proxy ndp. + conf/interface/*: Change special settings per interface. diff --git a/Documentation/networking/secid.txt b/Documentation/networking/secid.txt new file mode 100644 index 0000000..95ea067 --- /dev/null +++ b/Documentation/networking/secid.txt @@ -0,0 +1,14 @@ +flowi structure: + +The secid member in the flow structure is used in LSMs (e.g. SELinux) to indicate +the label of the flow. This label of the flow is currently used in selecting +matching labeled xfrm(s). + +If this is an outbound flow, the label is derived from the socket, if any, or +the incoming packet this flow is being generated as a response to (e.g. tcp +resets, timewait ack, etc.). It is also conceivable that the label could be +derived from other sources such as process context, device, etc., in special +cases, as may be appropriate. + +If this is an inbound flow, the label is derived from the IPSec security +associations, if any, used by the packet. diff --git a/Documentation/scsi/ChangeLog.arcmsr b/Documentation/scsi/ChangeLog.arcmsr new file mode 100644 index 0000000..162c47f --- /dev/null +++ b/Documentation/scsi/ChangeLog.arcmsr @@ -0,0 +1,56 @@ +************************************************************************** +** History +** +** REV# DATE NAME DESCRIPTION +** 1.00.00.00 3/31/2004 Erich Chen First release +** 1.10.00.04 7/28/2004 Erich Chen modify for ioctl +** 1.10.00.06 8/28/2004 Erich Chen modify for 2.6.x +** 1.10.00.08 9/28/2004 Erich Chen modify for x86_64 +** 1.10.00.10 10/10/2004 Erich Chen bug fix for SMP & ioctl +** 1.20.00.00 11/29/2004 Erich Chen bug fix with arcmsr_bus_reset when PHY error +** 1.20.00.02 12/09/2004 Erich Chen bug fix with over 2T bytes RAID Volume +** 1.20.00.04 1/09/2005 Erich Chen fits for Debian linux kernel version 2.2.xx +** 1.20.00.05 2/20/2005 Erich Chen cleanly as look like a Linux driver at 2.6.x +** thanks for peoples kindness comment +** Kornel Wieliczek +** Christoph Hellwig +** Adrian Bunk +** Andrew Morton +** Christoph Hellwig +** James Bottomley +** Arjan van de Ven +** 1.20.00.06 3/12/2005 Erich Chen fix with arcmsr_pci_unmap_dma "unsigned long" cast, +** modify PCCB POOL allocated by "dma_alloc_coherent" +** (Kornel Wieliczek's comment) +** 1.20.00.07 3/23/2005 Erich Chen bug fix with arcmsr_scsi_host_template_init +** occur segmentation fault, +** if RAID adapter does not on PCI slot +** and modprobe/rmmod this driver twice. +** bug fix enormous stack usage (Adrian Bunk's comment) +** 1.20.00.08 6/23/2005 Erich Chen bug fix with abort command, +** in case of heavy loading when sata cable +** working on low quality connection +** 1.20.00.09 9/12/2005 Erich Chen bug fix with abort command handling, firmware version check +** and firmware update notify for hardware bug fix +** 1.20.00.10 9/23/2005 Erich Chen enhance sysfs function for change driver's max tag Q number. +** add DMA_64BIT_MASK for backward compatible with all 2.6.x +** add some useful message for abort command +** add ioctl code 'ARCMSR_IOCTL_FLUSH_ADAPTER_CACHE' +** customer can send this command for sync raid volume data +** 1.20.00.11 9/29/2005 Erich Chen by comment of Arjan van de Ven fix incorrect msleep redefine +** cast off sizeof(dma_addr_t) condition for 64bit pci_set_dma_mask +** 1.20.00.12 9/30/2005 Erich Chen bug fix with 64bit platform's ccbs using if over 4G system memory +** change 64bit pci_set_consistent_dma_mask into 32bit +** increcct adapter count if adapter initialize fail. +** miss edit at arcmsr_build_ccb.... +** psge += sizeof(struct _SG64ENTRY *) => +** psge += sizeof(struct _SG64ENTRY) +** 64 bits sg entry would be incorrectly calculated +** thanks Kornel Wieliczek give me kindly notify +** and detail description +** 1.20.00.13 11/15/2005 Erich Chen scheduling pending ccb with FIFO +** change the architecture of arcmsr command queue list +** for linux standard list +** enable usage of pci message signal interrupt +** follow Randy.Danlup kindness suggestion cleanup this code +**************************************************************************
\ No newline at end of file diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index be55670..ee03678 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -11,38 +11,43 @@ the original). Supported Cards/Chipsets ------------------------- PCI ID (pci.ids) OEM Product - 9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk) - 9005:0285:9005:028e Adaptec 2020SA (Skyhawk) - 9005:0285:9005:028b Adaptec 2025ZCR (Terminator) - 9005:0285:9005:028f Adaptec 2025SA (Terminator) - 9005:0285:9005:0286 Adaptec 2120S (Crusader) - 9005:0286:9005:028d Adaptec 2130S (Lancer) + 9005:0283:9005:0283 Adaptec Catapult (3210S with arc firmware) + 9005:0284:9005:0284 Adaptec Tomcat (3410S with arc firmware) 9005:0285:9005:0285 Adaptec 2200S (Vulcan) + 9005:0285:9005:0286 Adaptec 2120S (Crusader) 9005:0285:9005:0287 Adaptec 2200S (Vulcan-2m) + 9005:0285:9005:0288 Adaptec 3230S (Harrier) + 9005:0285:9005:0289 Adaptec 3240S (Tornado) + 9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk) + 9005:0285:9005:028b Adaptec 2025ZCR (Terminator) 9005:0286:9005:028c Adaptec 2230S (Lancer) 9005:0286:9005:028c Adaptec 2230SLP (Lancer) - 9005:0285:9005:0296 Adaptec 2240S (SabreExpress) + 9005:0286:9005:028d Adaptec 2130S (Lancer) + 9005:0285:9005:028e Adaptec 2020SA (Skyhawk) + 9005:0285:9005:028f Adaptec 2025SA (Terminator) 9005:0285:9005:0290 Adaptec 2410SA (Jaguar) - 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16) 9005:0285:103c:3227 Adaptec 2610SA (Bearcat HP release) + 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16) + 9005:0285:9005:0296 Adaptec 2240S (SabreExpress) 9005:0285:9005:0292 Adaptec 2810SA (Corsair-8) 9005:0285:9005:0294 Adaptec Prowler - 9005:0286:9005:029d Adaptec 2420SA (Intruder HP release) - 9005:0286:9005:029c Adaptec 2620SA (Intruder) - 9005:0286:9005:029b Adaptec 2820SA (Intruder) - 9005:0286:9005:02a7 Adaptec 2830SA (Skyray) - 9005:0286:9005:02a8 Adaptec 2430SA (Skyray) - 9005:0285:9005:0288 Adaptec 3230S (Harrier) - 9005:0285:9005:0289 Adaptec 3240S (Tornado) - 9005:0285:9005:0298 Adaptec 4000SAS (BlackBird) 9005:0285:9005:0297 Adaptec 4005SAS (AvonPark) + 9005:0285:9005:0298 Adaptec 4000SAS (BlackBird) 9005:0285:9005:0299 Adaptec 4800SAS (Marauder-X) 9005:0285:9005:029a Adaptec 4805SAS (Marauder-E) + 9005:0286:9005:029b Adaptec 2820SA (Intruder) + 9005:0286:9005:029c Adaptec 2620SA (Intruder) + 9005:0286:9005:029d Adaptec 2420SA (Intruder HP release) 9005:0286:9005:02a2 Adaptec 3800SAS (Hurricane44) + 9005:0286:9005:02a7 Adaptec 3805SAS (Hurricane80) + 9005:0286:9005:02a8 Adaptec 3400SAS (Hurricane40) + 9005:0286:9005:02ac Adaptec 1800SAS (Typhoon44) + 9005:0286:9005:02b3 Adaptec 2400SAS (Hurricane40lm) + 9005:0285:9005:02b5 Adaptec ASR5800 (Voodoo44) + 9005:0285:9005:02b6 Adaptec ASR5805 (Voodoo80) + 9005:0285:9005:02b7 Adaptec ASR5808 (Voodoo08) 1011:0046:9005:0364 Adaptec 5400S (Mustang) 1011:0046:9005:0365 Adaptec 5400S (Mustang) - 9005:0283:9005:0283 Adaptec Catapult (3210S with arc firmware) - 9005:0284:9005:0284 Adaptec Tomcat (3410S with arc firmware) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) 9005:0200:9005:0200 Adaptec Themisto (Jupiter) 9005:0286:9005:0800 Adaptec Callisto (Jupiter) @@ -64,18 +69,20 @@ Supported Cards/Chipsets 9005:0285:9005:0290 IBM ServeRAID 7t (Jaguar) 9005:0285:1014:02F2 IBM ServeRAID 8i (AvonPark) 9005:0285:1014:0312 IBM ServeRAID 8i (AvonParkLite) - 9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora) 9005:0286:1014:9540 IBM ServeRAID 8k/8k-l4 (AuroraLite) - 9005:0286:9005:029f ICP ICP9014R0 (Lancer) + 9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora) + 9005:0286:1014:034d IBM ServeRAID 8s (Hurricane) 9005:0286:9005:029e ICP ICP9024R0 (Lancer) + 9005:0286:9005:029f ICP ICP9014R0 (Lancer) 9005:0286:9005:02a0 ICP ICP9047MA (Lancer) 9005:0286:9005:02a1 ICP ICP9087MA (Lancer) + 9005:0286:9005:02a3 ICP ICP5445AU (Hurricane44) 9005:0286:9005:02a4 ICP ICP9085LI (Marauder-X) 9005:0286:9005:02a5 ICP ICP5085BR (Marauder-E) - 9005:0286:9005:02a3 ICP ICP5445AU (Hurricane44) 9005:0286:9005:02a6 ICP ICP9067MA (Intruder-6) - 9005:0286:9005:02a9 ICP ICP5087AU (Skyray) - 9005:0286:9005:02aa ICP ICP5047AU (Skyray) + 9005:0286:9005:02a9 ICP ICP5085AU (Hurricane80) + 9005:0286:9005:02aa ICP ICP5045AU (Hurricane40) + 9005:0286:9005:02b4 ICP ICP5045AL (Hurricane40lm) People ------------------------- diff --git a/Documentation/scsi/arcmsr_spec.txt b/Documentation/scsi/arcmsr_spec.txt new file mode 100644 index 0000000..5e00423 --- /dev/null +++ b/Documentation/scsi/arcmsr_spec.txt @@ -0,0 +1,574 @@ +******************************************************************************* +** ARECA FIRMWARE SPEC +******************************************************************************* +** Usage of IOP331 adapter +** (All In/Out is in IOP331's view) +** 1. Message 0 --> InitThread message and retrun code +** 2. Doorbell is used for RS-232 emulation +** inDoorBell : bit0 -- data in ready +** (DRIVER DATA WRITE OK) +** bit1 -- data out has been read +** (DRIVER DATA READ OK) +** outDooeBell: bit0 -- data out ready +** (IOP331 DATA WRITE OK) +** bit1 -- data in has been read +** (IOP331 DATA READ OK) +** 3. Index Memory Usage +** offset 0xf00 : for RS232 out (request buffer) +** offset 0xe00 : for RS232 in (scratch buffer) +** offset 0xa00 : for inbound message code message_rwbuffer +** (driver send to IOP331) +** offset 0xa00 : for outbound message code message_rwbuffer +** (IOP331 send to driver) +** 4. RS-232 emulation +** Currently 128 byte buffer is used +** 1st uint32_t : Data length (1--124) +** Byte 4--127 : Max 124 bytes of data +** 5. PostQ +** All SCSI Command must be sent through postQ: +** (inbound queue port) Request frame must be 32 bytes aligned +** #bit27--bit31 => flag for post ccb +** #bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb +** bit31 : +** 0 : 256 bytes frame +** 1 : 512 bytes frame +** bit30 : +** 0 : normal request +** 1 : BIOS request +** bit29 : reserved +** bit28 : reserved +** bit27 : reserved +** --------------------------------------------------------------------------- +** (outbount queue port) Request reply +** #bit27--bit31 +** => flag for reply +** #bit0--bit26 +** => real address (bit27--bit31) of reply arcmsr_cdb +** bit31 : must be 0 (for this type of reply) +** bit30 : reserved for BIOS handshake +** bit29 : reserved +** bit28 : +** 0 : no error, ignore AdapStatus/DevStatus/SenseData +** 1 : Error, error code in AdapStatus/DevStatus/SenseData +** bit27 : reserved +** 6. BIOS request +** All BIOS request is the same with request from PostQ +** Except : +** Request frame is sent from configuration space +** offset: 0x78 : Request Frame (bit30 == 1) +** offset: 0x18 : writeonly to generate +** IRQ to IOP331 +** Completion of request: +** (bit30 == 0, bit28==err flag) +** 7. Definition of SGL entry (structure) +** 8. Message1 Out - Diag Status Code (????) +** 9. Message0 message code : +** 0x00 : NOP +** 0x01 : Get Config +** ->offset 0xa00 :for outbound message code message_rwbuffer +** (IOP331 send to driver) +** Signature 0x87974060(4) +** Request len 0x00000200(4) +** numbers of queue 0x00000100(4) +** SDRAM Size 0x00000100(4)-->256 MB +** IDE Channels 0x00000008(4) +** vendor 40 bytes char +** model 8 bytes char +** FirmVer 16 bytes char +** Device Map 16 bytes char +** FirmwareVersion DWORD <== Added for checking of +** new firmware capability +** 0x02 : Set Config +** ->offset 0xa00 :for inbound message code message_rwbuffer +** (driver send to IOP331) +** Signature 0x87974063(4) +** UPPER32 of Request Frame (4)-->Driver Only +** 0x03 : Reset (Abort all queued Command) +** 0x04 : Stop Background Activity +** 0x05 : Flush Cache +** 0x06 : Start Background Activity +** (re-start if background is halted) +** 0x07 : Check If Host Command Pending +** (Novell May Need This Function) +** 0x08 : Set controller time +** ->offset 0xa00 : for inbound message code message_rwbuffer +** (driver to IOP331) +** byte 0 : 0xaa <-- signature +** byte 1 : 0x55 <-- signature +** byte 2 : year (04) +** byte 3 : month (1..12) +** byte 4 : date (1..31) +** byte 5 : hour (0..23) +** byte 6 : minute (0..59) +** byte 7 : second (0..59) +******************************************************************************* +******************************************************************************* +** RS-232 Interface for Areca Raid Controller +** The low level command interface is exclusive with VT100 terminal +** -------------------------------------------------------------------- +** 1. Sequence of command execution +** -------------------------------------------------------------------- +** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61) +** (B) Command block : variable length of data including length, +** command code, data and checksum byte +** (C) Return data : variable length of data +** -------------------------------------------------------------------- +** 2. Command block +** -------------------------------------------------------------------- +** (A) 1st byte : command block length (low byte) +** (B) 2nd byte : command block length (high byte) +** note ..command block length shouldn't > 2040 bytes, +** length excludes these two bytes +** (C) 3rd byte : command code +** (D) 4th and following bytes : variable length data bytes +** depends on command code +** (E) last byte : checksum byte (sum of 1st byte until last data byte) +** -------------------------------------------------------------------- +** 3. Command code and associated data +** -------------------------------------------------------------------- +** The following are command code defined in raid controller Command +** code 0x10--0x1? are used for system level management, +** no password checking is needed and should be implemented in separate +** well controlled utility and not for end user access. +** Command code 0x20--0x?? always check the password, +** password must be entered to enable these command. +** enum +** { +** GUI_SET_SERIAL=0x10, +** GUI_SET_VENDOR, +** GUI_SET_MODEL, +** GUI_IDENTIFY, +** GUI_CHECK_PASSWORD, +** GUI_LOGOUT, +** GUI_HTTP, +** GUI_SET_ETHERNET_ADDR, +** GUI_SET_LOGO, +** GUI_POLL_EVENT, +** GUI_GET_EVENT, +** GUI_GET_HW_MONITOR, +** // GUI_QUICK_CREATE=0x20, (function removed) +** GUI_GET_INFO_R=0x20, +** GUI_GET_INFO_V, +** GUI_GET_INFO_P, +** GUI_GET_INFO_S, +** GUI_CLEAR_EVENT, +** GUI_MUTE_BEEPER=0x30, +** GUI_BEEPER_SETTING, +** GUI_SET_PASSWORD, +** GUI_HOST_INTERFACE_MODE, +** GUI_REBUILD_PRIORITY, +** GUI_MAX_ATA_MODE, +** GUI_RESET_CONTROLLER, +** GUI_COM_PORT_SETTING, +** GUI_NO_OPERATION, +** GUI_DHCP_IP, +** GUI_CREATE_PASS_THROUGH=0x40, +** GUI_MODIFY_PASS_THROUGH, +** GUI_DELETE_PASS_THROUGH, +** GUI_IDENTIFY_DEVICE, +** GUI_CREATE_RAIDSET=0x50, +** GUI_DELETE_RAIDSET, +** GUI_EXPAND_RAIDSET, +** GUI_ACTIVATE_RAIDSET, +** GUI_CREATE_HOT_SPARE, +** GUI_DELETE_HOT_SPARE, +** GUI_CREATE_VOLUME=0x60, +** GUI_MODIFY_VOLUME, +** GUI_DELETE_VOLUME, +** GUI_START_CHECK_VOLUME, +** GUI_STOP_CHECK_VOLUME +** }; +** Command description : +** GUI_SET_SERIAL : Set the controller serial# +** byte 0,1 : length +** byte 2 : command code 0x10 +** byte 3 : password length (should be 0x0f) +** byte 4-0x13 : should be "ArEcATecHnoLogY" +** byte 0x14--0x23 : Serial number string (must be 16 bytes) +** GUI_SET_VENDOR : Set vendor string for the controller +** byte 0,1 : length +** byte 2 : command code 0x11 +** byte 3 : password length (should be 0x08) +** byte 4-0x13 : should be "ArEcAvAr" +** byte 0x14--0x3B : vendor string (must be 40 bytes) +** GUI_SET_MODEL : Set the model name of the controller +** byte 0,1 : length +** byte 2 : command code 0x12 +** byte 3 : password length (should be 0x08) +** byte 4-0x13 : should be "ArEcAvAr" +** byte 0x14--0x1B : model string (must be 8 bytes) +** GUI_IDENTIFY : Identify device +** byte 0,1 : length +** byte 2 : command code 0x13 +** return "Areca RAID Subsystem " +** GUI_CHECK_PASSWORD : Verify password +** byte 0,1 : length +** byte 2 : command code 0x14 +** byte 3 : password length +** byte 4-0x?? : user password to be checked +** GUI_LOGOUT : Logout GUI (force password checking on next command) +** byte 0,1 : length +** byte 2 : command code 0x15 +** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16) +** +** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address +** byte 0,1 : length +** byte 2 : command code 0x17 +** byte 3 : password length (should be 0x08) +** byte 4-0x13 : should be "ArEcAvAr" +** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes) +** GUI_SET_LOGO : Set logo in HTTP +** byte 0,1 : length +** byte 2 : command code 0x18 +** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo) +** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a +** byte 8 : TITLE.JPG data (each page must be 2000 bytes) +** note page0 1st 2 byte must be +** actual length of the JPG file +** GUI_POLL_EVENT : Poll If Event Log Changed +** byte 0,1 : length +** byte 2 : command code 0x19 +** GUI_GET_EVENT : Read Event +** byte 0,1 : length +** byte 2 : command code 0x1a +** byte 3 : Event Page (0:1st page/1/2/3:last page) +** GUI_GET_HW_MONITOR : Get HW monitor data +** byte 0,1 : length +** byte 2 : command code 0x1b +** byte 3 : # of FANs(example 2) +** byte 4 : # of Voltage sensor(example 3) +** byte 5 : # of temperature sensor(example 2) +** byte 6 : # of power +** byte 7/8 : Fan#0 (RPM) +** byte 9/10 : Fan#1 +** byte 11/12 : Voltage#0 original value in *1000 +** byte 13/14 : Voltage#0 value +** byte 15/16 : Voltage#1 org +** byte 17/18 : Voltage#1 +** byte 19/20 : Voltage#2 org +** byte 21/22 : Voltage#2 +** byte 23 : Temp#0 +** byte 24 : Temp#1 +** byte 25 : Power indicator (bit0 : power#0, +** bit1 : power#1) +** byte 26 : UPS indicator +** GUI_QUICK_CREATE : Quick create raid/volume set +** byte 0,1 : length +** byte 2 : command code 0x20 +** byte 3/4/5/6 : raw capacity +** byte 7 : raid level +** byte 8 : stripe size +** byte 9 : spare +** byte 10/11/12/13: device mask (the devices to create raid/volume) +** This function is removed, application like +** to implement quick create function +** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function. +** GUI_GET_INFO_R : Get Raid Set Information +** byte 0,1 : length +** byte 2 : command code 0x20 +** byte 3 : raidset# +** typedef struct sGUI_RAIDSET +** { +** BYTE grsRaidSetName[16]; +** DWORD grsCapacity; +** DWORD grsCapacityX; +** DWORD grsFailMask; +** BYTE grsDevArray[32]; +** BYTE grsMemberDevices; +** BYTE grsNewMemberDevices; +** BYTE grsRaidState; +** BYTE grsVolumes; +** BYTE grsVolumeList[16]; +** BYTE grsRes1; +** BYTE grsRes2; +** BYTE grsRes3; +** BYTE grsFreeSegments; +** DWORD grsRawStripes[8]; +** DWORD grsRes4; +** DWORD grsRes5; // Total to 128 bytes +** DWORD grsRes6; // Total to 128 bytes +** } sGUI_RAIDSET, *pGUI_RAIDSET; +** GUI_GET_INFO_V : Get Volume Set Information +** byte 0,1 : length +** byte 2 : command code 0x21 +** byte 3 : volumeset# +** typedef struct sGUI_VOLUMESET +** { +** BYTE gvsVolumeName[16]; // 16 +** DWORD gvsCapacity; +** DWORD gvsCapacityX; +** DWORD gvsFailMask; +** DWORD gvsStripeSize; +** DWORD gvsNewFailMask; +** DWORD gvsNewStripeSize; +** DWORD gvsVolumeStatus; +** DWORD gvsProgress; // 32 +** sSCSI_ATTR gvsScsi; +** BYTE gvsMemberDisks; +** BYTE gvsRaidLevel; // 8 +** BYTE gvsNewMemberDisks; +** BYTE gvsNewRaidLevel; +** BYTE gvsRaidSetNumber; +** BYTE gvsRes0; // 4 +** BYTE gvsRes1[4]; // 64 bytes +** } sGUI_VOLUMESET, *pGUI_VOLUMESET; +** GUI_GET_INFO_P : Get Physical Drive Information +** byte 0,1 : length +** byte 2 : command code 0x22 +** byte 3 : drive # (from 0 to max-channels - 1) +** typedef struct sGUI_PHY_DRV +** { +** BYTE gpdModelName[40]; +** BYTE gpdSerialNumber[20]; +** BYTE gpdFirmRev[8]; +** DWORD gpdCapacity; +** DWORD gpdCapacityX; // Reserved for expansion +** BYTE gpdDeviceState; +** BYTE gpdPioMode; +** BYTE gpdCurrentUdmaMode; +** BYTE gpdUdmaMode; +** BYTE gpdDriveSelect; +** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set +** sSCSI_ATTR gpdScsi; +** BYTE gpdReserved[40]; // Total to 128 bytes +** } sGUI_PHY_DRV, *pGUI_PHY_DRV; +** GUI_GET_INFO_S : Get System Information +** byte 0,1 : length +** byte 2 : command code 0x23 +** typedef struct sCOM_ATTR +** { +** BYTE comBaudRate; +** BYTE comDataBits; +** BYTE comStopBits; +** BYTE comParity; +** BYTE comFlowControl; +** } sCOM_ATTR, *pCOM_ATTR; +** typedef struct sSYSTEM_INFO +** { +** BYTE gsiVendorName[40]; +** BYTE gsiSerialNumber[16]; +** BYTE gsiFirmVersion[16]; +** BYTE gsiBootVersion[16]; +** BYTE gsiMbVersion[16]; +** BYTE gsiModelName[8]; +** BYTE gsiLocalIp[4]; +** BYTE gsiCurrentIp[4]; +** DWORD gsiTimeTick; +** DWORD gsiCpuSpeed; +** DWORD gsiICache; +** DWORD gsiDCache; +** DWORD gsiScache; +** DWORD gsiMemorySize; +** DWORD gsiMemorySpeed; +** DWORD gsiEvents; +** BYTE gsiMacAddress[6]; +** BYTE gsiDhcp; +** BYTE gsiBeeper; +** BYTE gsiChannelUsage; +** BYTE gsiMaxAtaMode; +** BYTE gsiSdramEcc; // 1:if ECC enabled +** BYTE gsiRebuildPriority; +** sCOM_ATTR gsiComA; // 5 bytes +** sCOM_ATTR gsiComB; // 5 bytes +** BYTE gsiIdeChannels; +** BYTE gsiScsiHostChannels; +** BYTE gsiIdeHostChannels; +** BYTE gsiMaxVolumeSet; +** BYTE gsiMaxRaidSet; +** BYTE gsiEtherPort; // 1:if ether net port supported +** BYTE gsiRaid6Engine; // 1:Raid6 engine supported +** BYTE gsiRes[75]; +** } sSYSTEM_INFO, *pSYSTEM_INFO; +** GUI_CLEAR_EVENT : Clear System Event +** byte 0,1 : length +** byte 2 : command code 0x24 +** GUI_MUTE_BEEPER : Mute current beeper +** byte 0,1 : length +** byte 2 : command code 0x30 +** GUI_BEEPER_SETTING : Disable beeper +** byte 0,1 : length +** byte 2 : command code 0x31 +** byte 3 : 0->disable, 1->enable +** GUI_SET_PASSWORD : Change password +** byte 0,1 : length +** byte 2 : command code 0x32 +** byte 3 : pass word length ( must <= 15 ) +** byte 4 : password (must be alpha-numerical) +** GUI_HOST_INTERFACE_MODE : Set host interface mode +** byte 0,1 : length +** byte 2 : command code 0x33 +** byte 3 : 0->Independent, 1->cluster +** GUI_REBUILD_PRIORITY : Set rebuild priority +** byte 0,1 : length +** byte 2 : command code 0x34 +** byte 3 : 0/1/2/3 (low->high) +** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used +** byte 0,1 : length +** byte 2 : command code 0x35 +** byte 3 : 0/1/2/3 (133/100/66/33) +** GUI_RESET_CONTROLLER : Reset Controller +** byte 0,1 : length +** byte 2 : command code 0x36 +** *Response with VT100 screen (discard it) +** GUI_COM_PORT_SETTING : COM port setting +** byte 0,1 : length +** byte 2 : command code 0x37 +** byte 3 : 0->COMA (term port), +** 1->COMB (debug port) +** byte 4 : 0/1/2/3/4/5/6/7 +** (1200/2400/4800/9600/19200/38400/57600/115200) +** byte 5 : data bit +** (0:7 bit, 1:8 bit : must be 8 bit) +** byte 6 : stop bit (0:1, 1:2 stop bits) +** byte 7 : parity (0:none, 1:off, 2:even) +** byte 8 : flow control +** (0:none, 1:xon/xoff, 2:hardware => must use none) +** GUI_NO_OPERATION : No operation +** byte 0,1 : length +** byte 2 : command code 0x38 +** GUI_DHCP_IP : Set DHCP option and local IP address +** byte 0,1 : length +** byte 2 : command code 0x39 +** byte 3 : 0:dhcp disabled, 1:dhcp enabled +** byte 4/5/6/7 : IP address +** GUI_CREATE_PASS_THROUGH : Create pass through disk +** byte 0,1 : length +** byte 2 : command code 0x40 +** byte 3 : device # +** byte 4 : scsi channel (0/1) +** byte 5 : scsi id (0-->15) +** byte 6 : scsi lun (0-->7) +** byte 7 : tagged queue (1 : enabled) +** byte 8 : cache mode (1 : enabled) +** byte 9 : max speed (0/1/2/3/4, +** async/20/40/80/160 for scsi) +** (0/1/2/3/4, 33/66/100/133/150 for ide ) +** GUI_MODIFY_PASS_THROUGH : Modify pass through disk +** byte 0,1 : length +** byte 2 : command code 0x41 +** byte 3 : device # +** byte 4 : scsi channel (0/1) +** byte 5 : scsi id (0-->15) +** byte 6 : scsi lun (0-->7) +** byte 7 : tagged queue (1 : enabled) +** byte 8 : cache mode (1 : enabled) +** byte 9 : max speed (0/1/2/3/4, +** async/20/40/80/160 for scsi) +** (0/1/2/3/4, 33/66/100/133/150 for ide ) +** GUI_DELETE_PASS_THROUGH : Delete pass through disk +** byte 0,1 : length +** byte 2 : command code 0x42 +** byte 3 : device# to be deleted +** GUI_IDENTIFY_DEVICE : Identify Device +** byte 0,1 : length +** byte 2 : command code 0x43 +** byte 3 : Flash Method +** (0:flash selected, 1:flash not selected) +** byte 4/5/6/7 : IDE device mask to be flashed +** note .... no response data available +** GUI_CREATE_RAIDSET : Create Raid Set +** byte 0,1 : length +** byte 2 : command code 0x50 +** byte 3/4/5/6 : device mask +** byte 7-22 : raidset name (if byte 7 == 0:use default) +** GUI_DELETE_RAIDSET : Delete Raid Set +** byte 0,1 : length +** byte 2 : command code 0x51 +** byte 3 : raidset# +** GUI_EXPAND_RAIDSET : Expand Raid Set +** byte 0,1 : length +** byte 2 : command code 0x52 +** byte 3 : raidset# +** byte 4/5/6/7 : device mask for expansion +** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate, +** 9:new raid level, +** 10:new stripe size +** 0/1/2/3/4/5->4/8/16/32/64/128K ) +** byte 11/12/13 : repeat for each volume in the raidset +** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set +** byte 0,1 : length +** byte 2 : command code 0x53 +** byte 3 : raidset# +** GUI_CREATE_HOT_SPARE : Create hot spare disk +** byte 0,1 : length +** byte 2 : command code 0x54 +** byte 3/4/5/6 : device mask for hot spare creation +** GUI_DELETE_HOT_SPARE : Delete hot spare disk +** byte 0,1 : length +** byte 2 : command code 0x55 +** byte 3/4/5/6 : device mask for hot spare deletion +** GUI_CREATE_VOLUME : Create volume set +** byte 0,1 : length +** byte 2 : command code 0x60 +** byte 3 : raidset# +** byte 4-19 : volume set name +** (if byte4 == 0, use default) +** byte 20-27 : volume capacity (blocks) +** byte 28 : raid level +** byte 29 : stripe size +** (0/1/2/3/4/5->4/8/16/32/64/128K) +** byte 30 : channel +** byte 31 : ID +** byte 32 : LUN +** byte 33 : 1 enable tag +** byte 34 : 1 enable cache +** byte 35 : speed +** (0/1/2/3/4->async/20/40/80/160 for scsi) +** (0/1/2/3/4->33/66/100/133/150 for IDE ) +** byte 36 : 1 to select quick init +** +** GUI_MODIFY_VOLUME : Modify volume Set +** byte 0,1 : length +** byte 2 : command code 0x61 +** byte 3 : volumeset# +** byte 4-19 : new volume set name +** (if byte4 == 0, not change) +** byte 20-27 : new volume capacity (reserved) +** byte 28 : new raid level +** byte 29 : new stripe size +** (0/1/2/3/4/5->4/8/16/32/64/128K) +** byte 30 : new channel +** byte 31 : new ID +** byte 32 : new LUN +** byte 33 : 1 enable tag +** byte 34 : 1 enable cache +** byte 35 : speed +** (0/1/2/3/4->async/20/40/80/160 for scsi) +** (0/1/2/3/4->33/66/100/133/150 for IDE ) +** GUI_DELETE_VOLUME : Delete volume set +** byte 0,1 : length +** byte 2 : command code 0x62 +** byte 3 : volumeset# +** GUI_START_CHECK_VOLUME : Start volume consistency check +** byte 0,1 : length +** byte 2 : command code 0x63 +** byte 3 : volumeset# +** GUI_STOP_CHECK_VOLUME : Stop volume consistency check +** byte 0,1 : length +** byte 2 : command code 0x64 +** --------------------------------------------------------------------- +** 4. Returned data +** --------------------------------------------------------------------- +** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61) +** (B) Length : 2 bytes +** (low byte 1st, excludes length and checksum byte) +** (C) status or data : +** <1> If length == 1 ==> 1 byte status code +** #define GUI_OK 0x41 +** #define GUI_RAIDSET_NOT_NORMAL 0x42 +** #define GUI_VOLUMESET_NOT_NORMAL 0x43 +** #define GUI_NO_RAIDSET 0x44 +** #define GUI_NO_VOLUMESET 0x45 +** #define GUI_NO_PHYSICAL_DRIVE 0x46 +** #define GUI_PARAMETER_ERROR 0x47 +** #define GUI_UNSUPPORTED_COMMAND 0x48 +** #define GUI_DISK_CONFIG_CHANGED 0x49 +** #define GUI_INVALID_PASSWORD 0x4a +** #define GUI_NO_DISK_SPACE 0x4b +** #define GUI_CHECKSUM_ERROR 0x4c +** #define GUI_PASSWORD_REQUIRED 0x4d +** <2> If length > 1 ==> +** data block returned from controller +** and the contents depends on the command code +** (E) Checksum : checksum of length and status or data byte +************************************************************************** diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt new file mode 100644 index 0000000..9e2078b --- /dev/null +++ b/Documentation/scsi/libsas.txt @@ -0,0 +1,484 @@ +SAS Layer +--------- + +The SAS Layer is a management infrastructure which manages +SAS LLDDs. It sits between SCSI Core and SAS LLDDs. The +layout is as follows: while SCSI Core is concerned with +SAM/SPC issues, and a SAS LLDD+sequencer is concerned with +phy/OOB/link management, the SAS layer is concerned with: + + * SAS Phy/Port/HA event management (LLDD generates, + SAS Layer processes), + * SAS Port management (creation/destruction), + * SAS Domain discovery and revalidation, + * SAS Domain device management, + * SCSI Host registration/unregistration, + * Device registration with SCSI Core (SAS) or libata + (SATA), and + * Expander management and exporting expander control + to user space. + +A SAS LLDD is a PCI device driver. It is concerned with +phy/OOB management, and vendor specific tasks and generates +events to the SAS layer. + +The SAS Layer does most SAS tasks as outlined in the SAS 1.1 +spec. + +The sas_ha_struct describes the SAS LLDD to the SAS layer. +Most of it is used by the SAS Layer but a few fields need to +be initialized by the LLDDs. + +After initializing your hardware, from the probe() function +you call sas_register_ha(). It will register your LLDD with +the SCSI subsystem, creating a SCSI host and it will +register your SAS driver with the sysfs SAS tree it creates. +It will then return. Then you enable your phys to actually +start OOB (at which point your driver will start calling the +notify_* event callbacks). + +Structure descriptions: + +struct sas_phy -------------------- +Normally this is statically embedded to your driver's +phy structure: + struct my_phy { + blah; + struct sas_phy sas_phy; + bleh; + }; +And then all the phys are an array of my_phy in your HA +struct (shown below). + +Then as you go along and initialize your phys you also +initialize the sas_phy struct, along with your own +phy structure. + +In general, the phys are managed by the LLDD and the ports +are managed by the SAS layer. So the phys are initialized +and updated by the LLDD and the ports are initialized and +updated by the SAS layer. + +There is a scheme where the LLDD can RW certain fields, +and the SAS layer can only read such ones, and vice versa. +The idea is to avoid unnecessary locking. + +enabled -- must be set (0/1) +id -- must be set [0,MAX_PHYS) +class, proto, type, role, oob_mode, linkrate -- must be set +oob_mode -- you set this when OOB has finished and then notify +the SAS Layer. + +sas_addr -- this normally points to an array holding the sas +address of the phy, possibly somewhere in your my_phy +struct. + +attached_sas_addr -- set this when you (LLDD) receive an +IDENTIFY frame or a FIS frame, _before_ notifying the SAS +layer. The idea is that sometimes the LLDD may want to fake +or provide a different SAS address on that phy/port and this +allows it to do this. At best you should copy the sas +address from the IDENTIFY frame or maybe generate a SAS +address for SATA directly attached devices. The Discover +process may later change this. + +frame_rcvd -- this is where you copy the IDENTIFY/FIS frame +when you get it; you lock, copy, set frame_rcvd_size and +unlock the lock, and then call the event. It is a pointer +since there's no way to know your hw frame size _exactly_, +so you define the actual array in your phy struct and let +this pointer point to it. You copy the frame from your +DMAable memory to that area holding the lock. + +sas_prim -- this is where primitives go when they're +received. See sas.h. Grab the lock, set the primitive, +release the lock, notify. + +port -- this points to the sas_port if the phy belongs +to a port -- the LLDD only reads this. It points to the +sas_port this phy is part of. Set by the SAS Layer. + +ha -- may be set; the SAS layer sets it anyway. + +lldd_phy -- you should set this to point to your phy so you +can find your way around faster when the SAS layer calls one +of your callbacks and passes you a phy. If the sas_phy is +embedded you can also use container_of -- whatever you +prefer. + + +struct sas_port -------------------- +The LLDD doesn't set any fields of this struct -- it only +reads them. They should be self explanatory. + +phy_mask is 32 bit, this should be enough for now, as I +haven't heard of a HA having more than 8 phys. + +lldd_port -- I haven't found use for that -- maybe other +LLDD who wish to have internal port representation can make +use of this. + + +struct sas_ha_struct -------------------- +It normally is statically declared in your own LLDD +structure describing your adapter: +struct my_sas_ha { + blah; + struct sas_ha_struct sas_ha; + struct my_phy phys[MAX_PHYS]; + struct sas_port sas_ports[MAX_PHYS]; /* (1) */ + bleh; +}; + +(1) If your LLDD doesn't have its own port representation. + +What needs to be initialized (sample function given below). + +pcidev +sas_addr -- since the SAS layer doesn't want to mess with + memory allocation, etc, this points to statically + allocated array somewhere (say in your host adapter + structure) and holds the SAS address of the host + adapter as given by you or the manufacturer, etc. +sas_port +sas_phy -- an array of pointers to structures. (see + note above on sas_addr). + These must be set. See more notes below. +num_phys -- the number of phys present in the sas_phy array, + and the number of ports present in the sas_port + array. There can be a maximum num_phys ports (one per + port) so we drop the num_ports, and only use + num_phys. + +The event interface: + + /* LLDD calls these to notify the class of an event. */ + void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event); + void (*notify_port_event)(struct sas_phy *, enum port_event); + void (*notify_phy_event)(struct sas_phy *, enum phy_event); + +When sas_register_ha() returns, those are set and can be +called by the LLDD to notify the SAS layer of such events +the SAS layer. + +The port notification: + + /* The class calls these to notify the LLDD of an event. */ + void (*lldd_port_formed)(struct sas_phy *); + void (*lldd_port_deformed)(struct sas_phy *); + +If the LLDD wants notification when a port has been formed +or deformed it sets those to a function satisfying the type. + +A SAS LLDD should also implement at least one of the Task +Management Functions (TMFs) described in SAM: + + /* Task Management Functions. Must be called from process context. */ + int (*lldd_abort_task)(struct sas_task *); + int (*lldd_abort_task_set)(struct domain_device *, u8 *lun); + int (*lldd_clear_aca)(struct domain_device *, u8 *lun); + int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); + int (*lldd_I_T_nexus_reset)(struct domain_device *); + int (*lldd_lu_reset)(struct domain_device *, u8 *lun); + int (*lldd_query_task)(struct sas_task *); + +For more information please read SAM from T10.org. + +Port and Adapter management: + + /* Port and Adapter management */ + int (*lldd_clear_nexus_port)(struct sas_port *); + int (*lldd_clear_nexus_ha)(struct sas_ha_struct *); + +A SAS LLDD should implement at least one of those. + +Phy management: + + /* Phy management */ + int (*lldd_control_phy)(struct sas_phy *, enum phy_func); + +lldd_ha -- set this to point to your HA struct. You can also +use container_of if you embedded it as shown above. + +A sample initialization and registration function +can look like this (called last thing from probe()) +*but* before you enable the phys to do OOB: + +static int register_sas_ha(struct my_sas_ha *my_ha) +{ + int i; + static struct sas_phy *sas_phys[MAX_PHYS]; + static struct sas_port *sas_ports[MAX_PHYS]; + + my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0]; + + for (i = 0; i < MAX_PHYS; i++) { + sas_phys[i] = &my_ha->phys[i].sas_phy; + sas_ports[i] = &my_ha->sas_ports[i]; + } + + my_ha->sas_ha.sas_phy = sas_phys; + my_ha->sas_ha.sas_port = sas_ports; + my_ha->sas_ha.num_phys = MAX_PHYS; + + my_ha->sas_ha.lldd_port_formed = my_port_formed; + + my_ha->sas_ha.lldd_dev_found = my_dev_found; + my_ha->sas_ha.lldd_dev_gone = my_dev_gone; + + my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1) + + my_ha->sas_ha.lldd_queue_size = ha_can_queue; + my_ha->sas_ha.lldd_execute_task = my_execute_task; + + my_ha->sas_ha.lldd_abort_task = my_abort_task; + my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set; + my_ha->sas_ha.lldd_clear_aca = my_clear_aca; + my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set; + my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2) + my_ha->sas_ha.lldd_lu_reset = my_lu_reset; + my_ha->sas_ha.lldd_query_task = my_query_task; + + my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port; + my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha; + + my_ha->sas_ha.lldd_control_phy = my_control_phy; + + return sas_register_ha(&my_ha->sas_ha); +} + +(1) This is normally a LLDD parameter, something of the +lines of a task collector. What it tells the SAS Layer is +whether the SAS layer should run in Direct Mode (default: +value 0 or 1) or Task Collector Mode (value greater than 1). + +In Direct Mode, the SAS Layer calls Execute Task as soon as +it has a command to send to the SDS, _and_ this is a single +command, i.e. not linked. + +Some hardware (e.g. aic94xx) has the capability to DMA more +than one task at a time (interrupt) from host memory. Task +Collector Mode is an optional feature for HAs which support +this in their hardware. (Again, it is completely optional +even if your hardware supports it.) + +In Task Collector Mode, the SAS Layer would do _natural_ +coalescing of tasks and at the appropriate moment it would +call your driver to DMA more than one task in a single HA +interrupt. DMBS may want to use this by insmod/modprobe +setting the lldd_max_execute_num to something greater than +1. + +(2) SAS 1.1 does not define I_T Nexus Reset TMF. + +Events +------ + +Events are _the only way_ a SAS LLDD notifies the SAS layer +of anything. There is no other method or way a LLDD to tell +the SAS layer of anything happening internally or in the SAS +domain. + +Phy events: + PHYE_LOSS_OF_SIGNAL, (C) + PHYE_OOB_DONE, + PHYE_OOB_ERROR, (C) + PHYE_SPINUP_HOLD. + +Port events, passed on a _phy_: + PORTE_BYTES_DMAED, (M) + PORTE_BROADCAST_RCVD, (E) + PORTE_LINK_RESET_ERR, (C) + PORTE_TIMER_EVENT, (C) + PORTE_HARD_RESET. + +Host Adapter event: + HAE_RESET + +A SAS LLDD should be able to generate + - at least one event from group C (choice), + - events marked M (mandatory) are mandatory (only one), + - events marked E (expander) if it wants the SAS layer + to handle domain revalidation (only one such). + - Unmarked events are optional. + +Meaning: + +HAE_RESET -- when your HA got internal error and was reset. + +PORTE_BYTES_DMAED -- on receiving an IDENTIFY/FIS frame +PORTE_BROADCAST_RCVD -- on receiving a primitive +PORTE_LINK_RESET_ERR -- timer expired, loss of signal, loss +of DWS, etc. (*) +PORTE_TIMER_EVENT -- DWS reset timeout timer expired (*) +PORTE_HARD_RESET -- Hard Reset primitive received. + +PHYE_LOSS_OF_SIGNAL -- the device is gone (*) +PHYE_OOB_DONE -- OOB went fine and oob_mode is valid +PHYE_OOB_ERROR -- Error while doing OOB, the device probably +got disconnected. (*) +PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent. + +(*) should set/clear the appropriate fields in the phy, + or alternatively call the inlined sas_phy_disconnected() + which is just a helper, from their tasklet. + +The Execute Command SCSI RPC: + + int (*lldd_execute_task)(struct sas_task *, int num, + unsigned long gfp_flags); + +Used to queue a task to the SAS LLDD. @task is the tasks to +be executed. @num should be the number of tasks being +queued at this function call (they are linked listed via +task::list), @gfp_mask should be the gfp_mask defining the +context of the caller. + +This function should implement the Execute Command SCSI RPC, +or if you're sending a SCSI Task as linked commands, you +should also use this function. + +That is, when lldd_execute_task() is called, the command(s) +go out on the transport *immediately*. There is *no* +queuing of any sort and at any level in a SAS LLDD. + +The use of task::list is two-fold, one for linked commands, +the other discussed below. + +It is possible to queue up more than one task at a time, by +initializing the list element of struct sas_task, and +passing the number of tasks enlisted in this manner in num. + +Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued; + 0, the task(s) were queued. + +If you want to pass num > 1, then either +A) you're the only caller of this function and keep track + of what you've queued to the LLDD, or +B) you know what you're doing and have a strategy of + retrying. + +As opposed to queuing one task at a time (function call), +batch queuing of tasks, by having num > 1, greatly +simplifies LLDD code, sequencer code, and _hardware design_, +and has some performance advantages in certain situations +(DBMS). + +The LLDD advertises if it can take more than one command at +a time at lldd_execute_task(), by setting the +lldd_max_execute_num parameter (controlled by "collector" +module parameter in aic94xx SAS LLDD). + +You should leave this to the default 1, unless you know what +you're doing. + +This is a function of the LLDD, to which the SAS layer can +cater to. + +int lldd_queue_size + The host adapter's queue size. This is the maximum +number of commands the lldd can have pending to domain +devices on behalf of all upper layers submitting through +lldd_execute_task(). + +You really want to set this to something (much) larger than +1. + +This _really_ has absolutely nothing to do with queuing. +There is no queuing in SAS LLDDs. + +struct sas_task { + dev -- the device this task is destined to + list -- must be initialized (INIT_LIST_HEAD) + task_proto -- _one_ of enum sas_proto + scatter -- pointer to scatter gather list array + num_scatter -- number of elements in scatter + total_xfer_len -- total number of bytes expected to be transfered + data_dir -- PCI_DMA_... + task_done -- callback when the task has finished execution +}; + +When an external entity, entity other than the LLDD or the +SAS Layer, wants to work with a struct domain_device, it +_must_ call kobject_get() when getting a handle on the +device and kobject_put() when it is done with the device. + +This does two things: + A) implements proper kfree() for the device; + B) increments/decrements the kref for all players: + domain_device + all domain_device's ... (if past an expander) + port + host adapter + pci device + and up the ladder, etc. + +DISCOVERY +--------- + +The sysfs tree has the following purposes: + a) It shows you the physical layout of the SAS domain at + the current time, i.e. how the domain looks in the + physical world right now. + b) Shows some device parameters _at_discovery_time_. + +This is a link to the tree(1) program, very useful in +viewing the SAS domain: +ftp://mama.indstate.edu/linux/tree/ +I expect user space applications to actually create a +graphical interface of this. + +That is, the sysfs domain tree doesn't show or keep state if +you e.g., change the meaning of the READY LED MEANING +setting, but it does show you the current connection status +of the domain device. + +Keeping internal device state changes is responsibility of +upper layers (Command set drivers) and user space. + +When a device or devices are unplugged from the domain, this +is reflected in the sysfs tree immediately, and the device(s) +removed from the system. + +The structure domain_device describes any device in the SAS +domain. It is completely managed by the SAS layer. A task +points to a domain device, this is how the SAS LLDD knows +where to send the task(s) to. A SAS LLDD only reads the +contents of the domain_device structure, but it never creates +or destroys one. + +Expander management from User Space +----------------------------------- + +In each expander directory in sysfs, there is a file called +"smp_portal". It is a binary sysfs attribute file, which +implements an SMP portal (Note: this is *NOT* an SMP port), +to which user space applications can send SMP requests and +receive SMP responses. + +Functionality is deceptively simple: + +1. Build the SMP frame you want to send. The format and layout + is described in the SAS spec. Leave the CRC field equal 0. +open(2) +2. Open the expander's SMP portal sysfs file in RW mode. +write(2) +3. Write the frame you built in 1. +read(2) +4. Read the amount of data you expect to receive for the frame you built. + If you receive different amount of data you expected to receive, + then there was some kind of error. +close(2) +All this process is shown in detail in the function do_smp_func() +and its callers, in the file "expander_conf.c". + +The kernel functionality is implemented in the file +"sas_expander.c". + +The program "expander_conf.c" implements this. It takes one +argument, the sysfs file name of the SMP portal to the +expander, and gives expander information, including routing +tables. + +The SMP portal gives you complete control of the expander, +so please be careful. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index f61af23..e6b57dd 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -758,6 +758,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) single_cmd - Use single immediate commands to communicate with codecs (for debugging only) + disable_msi - Disable Message Signaled Interrupt (MSI) This module supports one card and autoprobe. @@ -778,11 +779,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack-digout 6-jack with a SPDIF out w810 3-jack z71v 3-jack (HP shared SPDIF) - asus 3-jack + asus 3-jack (ASUS Mobo) + asus-w1v ASUS W1V + asus-dig ASUS with SPDIF out + asus-dig2 ASUS with SPDIF out (using GPIO2) uniwill 3-jack F1734 2-jack lg LG laptop (m1 express dual) - lg-lw LG LW20 laptop + lg-lw LG LW20/LW25 laptop + tcl TCL S700 + clevo Clevo laptops (m520G, m665n) test for testing/debugging purpose, almost all controls can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y @@ -790,6 +796,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC260 hp HP machines + hp-3013 HP machines (3013-variant) fujitsu Fujitsu S7020 acer Acer TravelMate basic fixed pin assignment (old default model) @@ -797,24 +804,32 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC262 fujitsu Fujitsu Laptop + hp-bpc HP xw4400/6400/8400/9400 laptops + benq Benq ED8 basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default) ALC882/885 3stack-dig 3-jack with SPDIF I/O 6stck-dig 6-jack digital with SPDIF I/O + arima Arima W820Di1 auto auto-config reading BIOS (default) ALC883/888 3stack-dig 3-jack with SPDIF I/O 6stack-dig 6-jack digital with SPDIF I/O - 6stack-dig-demo 6-stack digital for Intel demo board + 3stack-6ch 3-jack 6-channel + 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O + 6stack-dig-demo 6-jack digital for Intel demo board + acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) auto auto-config reading BIOS (default) ALC861/660 3stack 3-jack 3stack-dig 3-jack with SPDIF I/O 6stack-dig 6-jack with SPDIF I/O + 3stack-660 3-jack (for ALC660) + uniwill-m31 Uniwill M31 laptop auto auto-config reading BIOS (default) CMI9880 @@ -843,10 +858,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-dig ditto with SPDIF laptop 3-jack with hp-jack automute laptop-dig ditto with SPDIF - auto auto-confgi reading BIOS (default) + auto auto-config reading BIOS (default) + + STAC9200/9205/9220/9221/9254 + ref Reference board + 3stack D945 3stack + 5stack D945 5stack + SPDIF - STAC7661(?) + STAC9227/9228/9229/927x + ref Reference board + 3stack D965 3stack + 5stack D965 5stack + SPDIF + + STAC9872 vaio Setup for VAIO FE550G/SZ110 + vaio-ar Setup for VAIO AR If the default configuration doesn't work and one of the above matches with your device, report it together with the PCI @@ -1213,6 +1239,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports only 1 card. This module has no enable option. + Module snd-mts64 + ---------------- + + Module for Ego Systems (ESI) Miditerminal 4140 + + This module supports multiple devices. + Requires parport (CONFIG_PARPORT). + Module snd-nm256 ---------------- diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index b8dc51c..4807ef7 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -1054,9 +1054,8 @@ <para> For a device which allows hotplugging, you can use - <function>snd_card_free_in_thread</function>. This one will - postpone the destruction and wait in a kernel-thread until all - devices are closed. + <function>snd_card_free_when_closed</function>. This one will + postpone the destruction until all devices are closed. </para> </section> |