Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 448 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
new file mode 100644
index 0000000..8e3374d
--- /dev/null
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -0,0 +1,448 @@
+/*
+ *	linux/arch/alpha/kernel/sys_cabriolet.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
+ * PC164 and LX164.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_apecs.h>
+#include <asm/core_cia.h>
+#include <asm/core_lca.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned long cached_irq_mask = ~0UL;
+
+static inline void
+cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
+{
+	int ofs = (irq - 16) / 8;
+	outb(mask >> (16 + ofs * 8), 0x804 + ofs);
+}
+
+static inline void
+cabriolet_enable_irq(unsigned int irq)
+{
+	cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
+}
+
+static void
+cabriolet_disable_irq(unsigned int irq)
+{
+	cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
+}
+
+static unsigned int
+cabriolet_startup_irq(unsigned int irq)
+{ 
+	cabriolet_enable_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void
+cabriolet_end_irq(unsigned int irq)
+{ 
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		cabriolet_enable_irq(irq);
+}
+
+static struct hw_interrupt_type cabriolet_irq_type = {
+	.typename	= "CABRIOLET",
+	.startup	= cabriolet_startup_irq,
+	.shutdown	= cabriolet_disable_irq,
+	.enable		= cabriolet_enable_irq,
+	.disable	= cabriolet_disable_irq,
+	.ack		= cabriolet_disable_irq,
+	.end		= cabriolet_end_irq,
+};
+
+static void 
+cabriolet_device_interrupt(unsigned long v, struct pt_regs *r)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers */
+	pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16);
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1;	/* clear least bit set */
+		if (i == 4) {
+			isa_device_interrupt(v, r);
+		} else {
+			handle_irq(16 + i, r);
+		}
+	}
+}
+
+static void __init
+common_init_irq(void (*srm_dev_int)(unsigned long v, struct pt_regs *r))
+{
+	init_i8259a_irqs();
+
+	if (alpha_using_srm) {
+		alpha_mv.device_interrupt = srm_dev_int;
+		init_srm_irqs(35, 0);
+	}
+	else {
+		long i;
+
+		outb(0xff, 0x804);
+		outb(0xff, 0x805);
+		outb(0xff, 0x806);
+
+		for (i = 16; i < 35; ++i) {
+			irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
+			irq_desc[i].handler = &cabriolet_irq_type;
+		}
+	}
+
+	common_init_isa_dma();
+	setup_irq(16+4, &isa_cascade_irqaction);
+}
+
+#ifndef CONFIG_ALPHA_PC164
+static void __init
+cabriolet_init_irq(void)
+{
+	common_init_irq(srm_device_interrupt);
+}
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
+/* In theory, the PC164 has the same interrupt hardware as the other
+   Cabriolet based systems.  However, something got screwed up late
+   in the development cycle which broke the interrupt masking hardware.
+   Repeat, it is not possible to mask and ack interrupts.  At all.
+
+   In an attempt to work around this, while processing interrupts,
+   we do not allow the IPL to drop below what it is currently.  This
+   prevents the possibility of recursion.  
+
+   ??? Another option might be to force all PCI devices to use edge
+   triggered rather than level triggered interrupts.  That might be
+   too invasive though.  */
+
+static void
+pc164_srm_device_interrupt(unsigned long v, struct pt_regs *r)
+{
+	__min_ipl = getipl();
+	srm_device_interrupt(v, r);
+	__min_ipl = 0;
+}
+
+static void
+pc164_device_interrupt(unsigned long v, struct pt_regs *r)
+{
+	__min_ipl = getipl();
+	cabriolet_device_interrupt(v, r);
+	__min_ipl = 0;
+}
+
+static void __init
+pc164_init_irq(void)
+{
+	common_init_irq(pc164_srm_device_interrupt);
+}
+#endif
+
+/*
+ * The EB66+ is very similar to the EB66 except that it does not have
+ * the on-board NCR and Tulip chips.  In the code below, I have used
+ * slot number to refer to the id select line and *not* the slot
+ * number used in the EB66+ documentation.  However, in the table,
+ * I've given the slot number, the id select line and the Jxx number
+ * that's printed on the board.  The interrupt pins from the PCI slots
+ * are wired into 3 interrupt summary registers at 0x804, 0x805 and
+ * 0x806 ISA.
+ *
+ * In the table, -1 means don't assign an IRQ number.  This is usually
+ * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
+ */
+
+static inline int __init
+eb66p_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] __initdata = {
+		/*INT  INTA  INTB  INTC   INTD */
+		{16+0, 16+0, 16+5,  16+9, 16+13},  /* IdSel 6,  slot 0, J25 */
+		{16+1, 16+1, 16+6, 16+10, 16+14},  /* IdSel 7,  slot 1, J26 */
+		{  -1,   -1,   -1,    -1,    -1},  /* IdSel 8,  SIO         */
+		{16+2, 16+2, 16+7, 16+11, 16+15},  /* IdSel 9,  slot 2, J27 */
+		{16+3, 16+3, 16+8, 16+12,  16+6}   /* IdSel 10, slot 3, J28 */
+	};
+	const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+
+/*
+ * The AlphaPC64 is very similar to the EB66+ except that its slots
+ * are numbered differently.  In the code below, I have used slot
+ * number to refer to the id select line and *not* the slot number
+ * used in the AlphaPC64 documentation.  However, in the table, I've
+ * given the slot number, the id select line and the Jxx number that's
+ * printed on the board.  The interrupt pins from the PCI slots are
+ * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806
+ * ISA.
+ *
+ * In the table, -1 means don't assign an IRQ number.  This is usually
+ * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
+ */
+
+static inline int __init
+cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] __initdata = {
+		/*INT   INTA  INTB  INTC   INTD */
+		{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5,  slot 2, J21 */
+		{ 16+0, 16+0, 16+5,  16+9, 16+13}, /* IdSel 6,  slot 0, J19 */
+		{ 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7,  slot 1, J20 */
+		{   -1,   -1,   -1,    -1,    -1}, /* IdSel 8,  SIO         */
+		{ 16+3, 16+3, 16+8, 16+12, 16+16}  /* IdSel 9,  slot 3, J22 */
+	};
+	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static inline void __init
+cabriolet_init_pci(void)
+{
+	common_init_pci();
+	ns87312_enable_ide(0x398);
+}
+
+static inline void __init
+cia_cab_init_pci(void)
+{
+	cia_init_pci();
+	ns87312_enable_ide(0x398);
+}
+
+/*
+ * The PC164 and LX164 have 19 PCI interrupts, four from each of the four
+ * PCI slots, the SIO, PCI/IDE, and USB.
+ * 
+ * Each of the interrupts can be individually masked. This is
+ * accomplished by setting the appropriate bit in the mask register.
+ * A bit is set by writing a "1" to the desired position in the mask
+ * register and cleared by writing a "0". There are 3 mask registers
+ * located at ISA address 804h, 805h and 806h.
+ * 
+ * An I/O read at ISA address 804h, 805h, 806h will return the
+ * state of the 11 PCI interrupts and not the state of the MASKED
+ * interrupts.
+ * 
+ * Note: A write to I/O 804h, 805h, and 806h the mask register will be
+ * updated.
+ * 
+ * 
+ * 				ISA DATA<7:0>
+ * ISA     +--------------------------------------------------------------+
+ * ADDRESS |   7   |   6   |   5   |   4   |   3   |   2  |   1   |   0   |
+ *         +==============================================================+
+ * 0x804   | INTB0 |  USB  |  IDE  |  SIO  | INTA3 |INTA2 | INTA1 | INTA0 |
+ *         +--------------------------------------------------------------+
+ * 0x805   | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 |
+ *         +--------------------------------------------------------------+
+ * 0x806   | Rsrv  | Rsrv  | Rsrv  | Rsrv  | Rsrv  |INTD3 | INTD2 | INTD1 |
+ *         +--------------------------------------------------------------+
+ *         * Rsrv = reserved bits
+ *         Note: The mask register is write-only.
+ * 
+ * IdSel	
+ *   5	 32 bit PCI option slot 2
+ *   6	 64 bit PCI option slot 0
+ *   7	 64 bit PCI option slot 1
+ *   8	 Saturn I/O
+ *   9	 32 bit PCI option slot 3
+ *  10	 USB
+ *  11	 IDE
+ * 
+ */
+
+static inline int __init
+alphapc164_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[7][5] __initdata = {
+		/*INT   INTA  INTB   INTC   INTD */
+		{ 16+2, 16+2, 16+9,  16+13, 16+17}, /* IdSel  5, slot 2, J20 */
+		{ 16+0, 16+0, 16+7,  16+11, 16+15}, /* IdSel  6, slot 0, J29 */
+		{ 16+1, 16+1, 16+8,  16+12, 16+16}, /* IdSel  7, slot 1, J26 */
+		{   -1,   -1,   -1,    -1,    -1},  /* IdSel  8, SIO */
+		{ 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel  9, slot 3, J19 */
+		{ 16+6, 16+6, 16+6,  16+6,  16+6},  /* IdSel 10, USB */
+		{ 16+5, 16+5, 16+5,  16+5,  16+5}   /* IdSel 11, IDE */
+	};
+	const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static inline void __init
+alphapc164_init_pci(void)
+{
+	cia_init_pci();
+	SMC93x_Init();
+}
+
+
+/*
+ * The System Vector
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
+struct alpha_machine_vector cabriolet_mv __initmv = {
+	.vector_name		= "Cabriolet",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cabriolet_init_pci,
+	.pci_map_irq		= cabriolet_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+#ifndef CONFIG_ALPHA_EB64P
+ALIAS_MV(cabriolet)
+#endif
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
+struct alpha_machine_vector eb164_mv __initmv = {
+	.vector_name		= "EB164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cia_cab_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= cabriolet_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb164)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
+struct alpha_machine_vector eb66p_mv __initmv = {
+	.vector_name		= "EB66+",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cabriolet_init_pci,
+	.pci_map_irq		= eb66p_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb66p)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
+struct alpha_machine_vector lx164_mv __initmv = {
+	.vector_name		= "LX164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphapc164_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= alphapc164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(lx164)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
+struct alpha_machine_vector pc164_mv __initmv = {
+	.vector_name		= "PC164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= pc164_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= pc164_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphapc164_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= alphapc164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(pc164)
+#endif