Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h

2 files changed, 100 insertions, 22 deletions

diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 85e6fd2..eda4e3a 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -119,7 +119,7 @@ static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
 }
 
 static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
-			     pin_cfg_t cfg)
+			     pin_cfg_t cfg, bool sleep)
 {
 	static const char *afnames[] = {
 		[NMK_GPIO_ALT_GPIO]	= "GPIO",
@@ -145,11 +145,34 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
 	int output = PIN_DIR(cfg);
 	int val = PIN_VAL(cfg);
 
-	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
-		pin, afnames[af], pullnames[pull], slpmnames[slpm],
+	dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
+		pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
 		output ? "output " : "input",
 		output ? (val ? "high" : "low") : "");
 
+	if (sleep) {
+		int slpm_pull = PIN_SLPM_PULL(cfg);
+		int slpm_output = PIN_SLPM_DIR(cfg);
+		int slpm_val = PIN_SLPM_VAL(cfg);
+
+		/*
+		 * The SLPM_* values are normal values + 1 to allow zero to
+		 * mean "same as normal".
+		 */
+		if (slpm_pull)
+			pull = slpm_pull - 1;
+		if (slpm_output)
+			output = slpm_output - 1;
+		if (slpm_val)
+			val = slpm_val - 1;
+
+		dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
+			pin,
+			slpm_pull ? pullnames[pull] : "same",
+			slpm_output ? (output ? "output" : "input") : "same",
+			slpm_val ? (val ? "high" : "low") : "same");
+	}
+
 	if (output)
 		__nmk_gpio_make_output(nmk_chip, offset, val);
 	else {
@@ -175,7 +198,7 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
  * side-effects.  The gpio can be manipulated later using standard GPIO API
  * calls.
  */
-int nmk_config_pin(pin_cfg_t cfg)
+int nmk_config_pin(pin_cfg_t cfg, bool sleep)
 {
 	struct nmk_gpio_chip *nmk_chip;
 	int gpio = PIN_NUM(cfg);
@@ -186,7 +209,7 @@ int nmk_config_pin(pin_cfg_t cfg)
 		return -EINVAL;
 
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
 	return 0;
@@ -207,7 +230,7 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num)
 	int i;
 
 	for (i = 0; i < num; i++) {
-		int ret = nmk_config_pin(cfgs[i]);
+		ret = nmk_config_pin(cfgs[i], false);
 		if (ret)
 			break;
 	}
@@ -216,6 +239,21 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num)
 }
 EXPORT_SYMBOL(nmk_config_pins);
 
+int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		ret = nmk_config_pin(cfgs[i], true);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins_sleep);
+
 /**
  * nmk_gpio_set_slpm() - configure the sleep mode of a pin
  * @gpio: pin number
@@ -634,7 +672,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	chip = &nmk_chip->chip;
 	chip->base = pdata->first_gpio;
-	chip->label = pdata->name;
+	chip->label = pdata->name ?: dev_name(&dev->dev);
 	chip->dev = &dev->dev;
 	chip->owner = THIS_MODULE;
 
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 8c5ae3f..05a3936 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -19,16 +19,22 @@
  *	bit  9..10 - Alternate Function Selection
  *	bit 11..12 - Pull up/down state
  *	bit     13 - Sleep mode behaviour
- *	bit     14 - (sleep mode) Direction
- *	bit     15 - (sleep mode) Value (if output)
+ *	bit     14 - Direction
+ *	bit     15 - Value (if output)
+ *	bit 16..18 - SLPM pull up/down state
+ *	bit 19..20 - SLPM direction
+ *	bit 21..22 - SLPM Value (if output)
  *
  * to facilitate the definition, the following macros are provided
  *
  * PIN_CFG_DEFAULT - default config (0):
  *		     pull up/down = disabled
  *		     sleep mode = input/wakeup
- *		     (sleep mode) direction = input
- *		     (sleep mode) value = low
+ *		     direction = input
+ *		     value = low
+ *		     SLPM direction = same as normal
+ *		     SLPM pull = same as normal
+ *		     SLPM value = same as normal
  *
  * PIN_CFG	   - default config with alternate function
  * PIN_CFG_PULL	   - default config with alternate function and pull up/down
@@ -75,30 +81,64 @@ typedef unsigned long pin_cfg_t;
 #define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
 #define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
 
-/* Shortcuts.  Use these instead of separate DIR and VAL.  */
-#define PIN_INPUT		PIN_DIR_INPUT
+#define PIN_SLPM_PULL_SHIFT	16
+#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)	\
+	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE	\
+	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP	\
+	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN	\
+	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT	19
+#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)		\
+	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT	21
+#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)		\
+	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
 #define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
 #define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
 
-/*
- * These are the same as the ones above, but should make more sense to the
- * reader when seen along with a setting a pin to AF mode.
- */
-#define PIN_SLPM_INPUT		PIN_INPUT
-#define PIN_SLPM_OUTPUT_LOW	PIN_OUTPUT_LOW
-#define PIN_SLPM_OUTPUT_HIGH	PIN_OUTPUT_HIGH
+#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
 
-#define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
+#define PIN_CFG_DEFAULT		(0)
 
 #define PIN_CFG(num, alt)		\
 	(PIN_CFG_DEFAULT |\
 	 (PIN_NUM(num) | PIN_##alt))
 
+#define PIN_CFG_INPUT(num, alt, pull)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
 #define PIN_CFG_PULL(num, alt, pull)	\
 	((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
 	 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
 
-extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
 extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
 
 #endif