MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

462 files changed, 61610 insertions, 0 deletions

diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
new file mode 100644
index 0000000..7897f05
--- /dev/null
+++ b/arch/mips/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += cachectl.h sgidefs.h sysmips.h
diff --git a/arch/mips/include/asm/a.out.h b/arch/mips/include/asm/a.out.h
new file mode 100644
index 0000000..cad8371
--- /dev/null
+++ b/arch/mips/include/asm/a.out.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_A_OUT_H
+#define _ASM_A_OUT_H
+
+#ifdef __KERNEL__
+
+
+#endif
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for
+				    file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file,
+				   in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in
+				    bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_A_OUT_H */
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
new file mode 100644
index 0000000..1dd74fb
--- /dev/null
+++ b/arch/mips/include/asm/abi.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_ABI_H
+#define _ASM_ABI_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+struct mips_abi {
+	int (* const setup_frame)(struct k_sigaction * ka,
+	                          struct pt_regs *regs, int signr,
+	                          sigset_t *set);
+	int (* const setup_rt_frame)(struct k_sigaction * ka,
+	                       struct pt_regs *regs, int signr,
+	                       sigset_t *set, siginfo_t *info);
+	const unsigned long	restart;
+};
+
+#endif /* _ASM_ABI_H */
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
new file mode 100644
index 0000000..569f80a
--- /dev/null
+++ b/arch/mips/include/asm/addrspace.h
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ADDRSPACE_H
+#define _ASM_ADDRSPACE_H
+
+#include <spaces.h>
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ATYPE_
+#define _ATYPE32_
+#define _ATYPE64_
+#define _CONST64_(x)	x
+#else
+#define _ATYPE_		__PTRDIFF_TYPE__
+#define _ATYPE32_	int
+#define _ATYPE64_	__s64
+#ifdef CONFIG_64BIT
+#define _CONST64_(x)	x ## L
+#else
+#define _CONST64_(x)	x ## LL
+#endif
+#endif
+
+/*
+ *  32-bit MIPS address spaces
+ */
+#ifdef __ASSEMBLY__
+#define _ACAST32_
+#define _ACAST64_
+#else
+#define _ACAST32_		(_ATYPE_)(_ATYPE32_)	/* widen if necessary */
+#define _ACAST64_		(_ATYPE64_)		/* do _not_ narrow */
+#endif
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#define KSEGX(a)		((_ACAST32_ (a)) & 0xe0000000)
+
+/*
+ * Returns the physical address of a CKSEGx / XKPHYS address
+ */
+#define CPHYSADDR(a)		((_ACAST32_(a)) & 0x1fffffff)
+#define XPHYSADDR(a)            ((_ACAST64_(a)) &			\
+				 _CONST64_(0x000000ffffffffff))
+
+#ifdef CONFIG_64BIT
+
+/*
+ * Memory segments (64bit kernel mode addresses)
+ * The compatibility segments use the full 64-bit sign extended value.  Note
+ * the R8000 doesn't have them so don't reference these in generic MIPS code.
+ */
+#define XKUSEG			_CONST64_(0x0000000000000000)
+#define XKSSEG			_CONST64_(0x4000000000000000)
+#define XKPHYS			_CONST64_(0x8000000000000000)
+#define XKSEG			_CONST64_(0xc000000000000000)
+#define CKSEG0			_CONST64_(0xffffffff80000000)
+#define CKSEG1			_CONST64_(0xffffffffa0000000)
+#define CKSSEG			_CONST64_(0xffffffffc0000000)
+#define CKSEG3			_CONST64_(0xffffffffe0000000)
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | CKSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | CKSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | CKSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | CKSEG3)
+
+#else
+
+#define CKSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define CKSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define CKSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define CKSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#define KSEG0ADDR(a)		(CPHYSADDR(a) | KSEG0)
+#define KSEG1ADDR(a)		(CPHYSADDR(a) | KSEG1)
+#define KSEG2ADDR(a)		(CPHYSADDR(a) | KSEG2)
+#define KSEG3ADDR(a)		(CPHYSADDR(a) | KSEG3)
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ * These are the traditional names used in the 32-bit universe.
+ */
+#define KUSEG			0x00000000
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+#define KSEG2			0xc0000000
+#define KSEG3			0xe0000000
+
+#define CKUSEG			0x00000000
+#define CKSEG0			0x80000000
+#define CKSEG1			0xa0000000
+#define CKSEG2			0xc0000000
+#define CKSEG3			0xe0000000
+
+#endif
+
+/*
+ * Cache modes for XKPHYS address conversion macros
+ */
+#define K_CALG_COH_EXCL1_NOL2	0
+#define K_CALG_COH_SHRL1_NOL2	1
+#define K_CALG_UNCACHED		2
+#define K_CALG_NONCOHERENT	3
+#define K_CALG_COH_EXCL		4
+#define K_CALG_COH_SHAREABLE	5
+#define K_CALG_NOTUSED		6
+#define K_CALG_UNCACHED_ACCEL	7
+
+/*
+ * 64-bit address conversions
+ */
+#define PHYS_TO_XKSEG_UNCACHED(p)	PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
+#define PHYS_TO_XKSEG_CACHED(p)		PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
+#define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
+#define PHYS_TO_XKPHYS(cm, a)		(_CONST64_(0x8000000000000000) | \
+					 (_CONST64_(cm) << 59) | (a))
+
+/*
+ * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
+ * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
+ * R8000 implements most with its 48-bit physical address space.
+ */
+#define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
+
+#ifndef CONFIG_CPU_R8000
+
+/*
+ * The R8000 doesn't have the 32-bit compat spaces so we don't define them
+ * in order to catch bugs in the source code.
+ */
+
+#define COMPAT_K1BASE32		_CONST64_(0xffffffffa0000000)
+#define PHYS_TO_COMPATK1(x)	((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
+
+#endif
+
+#define KDM_TO_PHYS(x)		(_ACAST64_ (x) & TO_PHYS_MASK)
+#define PHYS_TO_K0(x)		(_ACAST64_ (x) | CAC_BASE)
+
+#endif /* _ASM_ADDRSPACE_H */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
new file mode 100644
index 0000000..608cfcf
--- /dev/null
+++ b/arch/mips/include/asm/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register)                             \
+		.cprestore register
+#define CPADD(register)                                 \
+		.cpadd	register
+#define CPLOAD(register)                                \
+		.cpload	register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define	LEAF(symbol)                                    \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol, @function;              \
+		.ent	symbol, 0;                      \
+symbol:		.frame	sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define	NESTED(symbol, framesize, rpc)                  \
+		.globl	symbol;                         \
+		.align	2;                              \
+		.type	symbol, @function;              \
+		.ent	symbol, 0;                       \
+symbol:		.frame	sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define	END(function)                                   \
+		.end	function;		        \
+		.size	function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol)					\
+		.globl	symbol;                         \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol)					\
+		.globl	symbol;				\
+		.type	symbol, @function;		\
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define	ABS(symbol,value)                               \
+		.globl	symbol;                         \
+symbol		=	value
+
+#define	PANIC(msg)                                      \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0, 8f;                          \
+		jal	panic;                          \
+9:		b	9b;                             \
+		.set	pop;				\
+		TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string)                                   \
+		.set	push;				\
+		.set	reorder;                        \
+		PTR_LA	a0, 8f;                          \
+		jal	printk;                         \
+		.set	pop;				\
+		TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define	TEXT(msg)                                       \
+		.pushsection .data;			\
+8:		.asciiz	msg;                            \
+		.popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string)                                  \
+		.pushsection .text;			\
+		.word	1f;                             \
+		.popsection				\
+		.pushsection .data;			\
+1:		.asciiz	string;                         \
+		.popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop.  The R5000
+ * is one of them.  So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr)                                 \
+		.set	push;				\
+		.set	mips4;				\
+		pref	hint, addr;			\
+		.set	pop
+
+#define PREFX(hint,addr)                                \
+		.set	push;				\
+		.set	mips4;				\
+		prefx	hint, addr;			\
+		.set	pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt)                                \
+		.set	push;				\
+		.set	reorder;			\
+		beqz	rt, 9f;                         \
+		move	rd, rs;                         \
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)                                \
+		.set	push;				\
+		.set	reorder;			\
+		bnez	rt, 9f;                         \
+		move	rd, rs;                         \
+		.set	pop;				\
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt)                                \
+		.set	push;				\
+		.set	noreorder;			\
+		bnezl	rt, 9f;                         \
+		 move	rd, rs;                         \
+		.set	pop;				\
+9:
+#define MOVZ(rd, rs, rt)                                \
+		.set	push;				\
+		.set	noreorder;			\
+		beqzl	rt, 9f;                         \
+		 move	rd, rs;                         \
+		.set	pop;				\
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+    (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt)                                \
+		movn	rd, rs, rt
+#define MOVZ(rd, rs, rt)                                \
+		movz	rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ	7
+#define ALMASK	~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ	15
+#define ALMASK	~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG	8
+#else
+#define SZREG	4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S		sw
+#define REG_L		lw
+#define REG_SUBU	subu
+#define REG_ADDU	addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S		sd
+#define REG_L		ld
+#define REG_SUBU	dsubu
+#define REG_ADDU	daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD		add
+#define INT_ADDU	addu
+#define INT_ADDI	addi
+#define INT_ADDIU	addiu
+#define INT_SUB		sub
+#define INT_SUBU	subu
+#define INT_L		lw
+#define INT_S		sw
+#define INT_SLL		sll
+#define INT_SLLV	sllv
+#define INT_SRL		srl
+#define INT_SRLV	srlv
+#define INT_SRA		sra
+#define INT_SRAV	srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD		dadd
+#define INT_ADDU	daddu
+#define INT_ADDI	daddi
+#define INT_ADDIU	daddiu
+#define INT_SUB		dsub
+#define INT_SUBU	dsubu
+#define INT_L		ld
+#define INT_S		sd
+#define INT_SLL		dsll
+#define INT_SLLV	dsllv
+#define INT_SRL		dsrl
+#define INT_SRLV	dsrlv
+#define INT_SRA		dsra
+#define INT_SRAV	dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD	add
+#define LONG_ADDU	addu
+#define LONG_ADDI	addi
+#define LONG_ADDIU	addiu
+#define LONG_SUB	sub
+#define LONG_SUBU	subu
+#define LONG_L		lw
+#define LONG_S		sw
+#define LONG_SLL	sll
+#define LONG_SLLV	sllv
+#define LONG_SRL	srl
+#define LONG_SRLV	srlv
+#define LONG_SRA	sra
+#define LONG_SRAV	srav
+
+#define LONG		.word
+#define LONGSIZE	4
+#define LONGMASK	3
+#define LONGLOG		2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD	dadd
+#define LONG_ADDU	daddu
+#define LONG_ADDI	daddi
+#define LONG_ADDIU	daddiu
+#define LONG_SUB	dsub
+#define LONG_SUBU	dsubu
+#define LONG_L		ld
+#define LONG_S		sd
+#define LONG_SLL	dsll
+#define LONG_SLLV	dsllv
+#define LONG_SRL	dsrl
+#define LONG_SRLV	dsrlv
+#define LONG_SRA	dsra
+#define LONG_SRAV	dsrav
+
+#define LONG		.dword
+#define LONGSIZE	8
+#define LONGMASK	7
+#define LONGLOG		3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD		add
+#define PTR_ADDU	addu
+#define PTR_ADDI	addi
+#define PTR_ADDIU	addiu
+#define PTR_SUB		sub
+#define PTR_SUBU	subu
+#define PTR_L		lw
+#define PTR_S		sw
+#define PTR_LA		la
+#define PTR_LI		li
+#define PTR_SLL		sll
+#define PTR_SLLV	sllv
+#define PTR_SRL		srl
+#define PTR_SRLV	srlv
+#define PTR_SRA		sra
+#define PTR_SRAV	srav
+
+#define PTR_SCALESHIFT	2
+
+#define PTR		.word
+#define PTRSIZE		4
+#define PTRLOG		2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD		dadd
+#define PTR_ADDU	daddu
+#define PTR_ADDI	daddi
+#define PTR_ADDIU	daddiu
+#define PTR_SUB		dsub
+#define PTR_SUBU	dsubu
+#define PTR_L		ld
+#define PTR_S		sd
+#define PTR_LA		dla
+#define PTR_LI		dli
+#define PTR_SLL		dsll
+#define PTR_SLLV	dsllv
+#define PTR_SRL		dsrl
+#define PTR_SRLV	dsrlv
+#define PTR_SRA		dsra
+#define PTR_SRAV	dsrav
+
+#define PTR_SCALESHIFT	3
+
+#define PTR		.dword
+#define PTRSIZE		8
+#define PTRLOG		3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0		mfc0
+#define MTC0		mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0		dmfc0
+#define MTC0		dmtc0
+#endif
+
+#define SSNOP		sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr)  cache   Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
new file mode 100644
index 0000000..5de3963
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -0,0 +1,158 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_32_H
+#define _ASM_ASMMACRO_32_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_double thread status tmp1=t0
+	cfc1	\tmp1,  fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp1, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_single thread tmp=t0
+	cfc1	\tmp,  fcr31
+	swc1	$f0,  THREAD_FPR0(\thread)
+	swc1	$f1,  THREAD_FPR1(\thread)
+	swc1	$f2,  THREAD_FPR2(\thread)
+	swc1	$f3,  THREAD_FPR3(\thread)
+	swc1	$f4,  THREAD_FPR4(\thread)
+	swc1	$f5,  THREAD_FPR5(\thread)
+	swc1	$f6,  THREAD_FPR6(\thread)
+	swc1	$f7,  THREAD_FPR7(\thread)
+	swc1	$f8,  THREAD_FPR8(\thread)
+	swc1	$f9,  THREAD_FPR9(\thread)
+	swc1	$f10, THREAD_FPR10(\thread)
+	swc1	$f11, THREAD_FPR11(\thread)
+	swc1	$f12, THREAD_FPR12(\thread)
+	swc1	$f13, THREAD_FPR13(\thread)
+	swc1	$f14, THREAD_FPR14(\thread)
+	swc1	$f15, THREAD_FPR15(\thread)
+	swc1	$f16, THREAD_FPR16(\thread)
+	swc1	$f17, THREAD_FPR17(\thread)
+	swc1	$f18, THREAD_FPR18(\thread)
+	swc1	$f19, THREAD_FPR19(\thread)
+	swc1	$f20, THREAD_FPR20(\thread)
+	swc1	$f21, THREAD_FPR21(\thread)
+	swc1	$f22, THREAD_FPR22(\thread)
+	swc1	$f23, THREAD_FPR23(\thread)
+	swc1	$f24, THREAD_FPR24(\thread)
+	swc1	$f25, THREAD_FPR25(\thread)
+	swc1	$f26, THREAD_FPR26(\thread)
+	swc1	$f27, THREAD_FPR27(\thread)
+	swc1	$f28, THREAD_FPR28(\thread)
+	swc1	$f29, THREAD_FPR29(\thread)
+	swc1	$f30, THREAD_FPR30(\thread)
+	swc1	$f31, THREAD_FPR31(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread status tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_single thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	lwc1	$f0,  THREAD_FPR0(\thread)
+	lwc1	$f1,  THREAD_FPR1(\thread)
+	lwc1	$f2,  THREAD_FPR2(\thread)
+	lwc1	$f3,  THREAD_FPR3(\thread)
+	lwc1	$f4,  THREAD_FPR4(\thread)
+	lwc1	$f5,  THREAD_FPR5(\thread)
+	lwc1	$f6,  THREAD_FPR6(\thread)
+	lwc1	$f7,  THREAD_FPR7(\thread)
+	lwc1	$f8,  THREAD_FPR8(\thread)
+	lwc1	$f9,  THREAD_FPR9(\thread)
+	lwc1	$f10, THREAD_FPR10(\thread)
+	lwc1	$f11, THREAD_FPR11(\thread)
+	lwc1	$f12, THREAD_FPR12(\thread)
+	lwc1	$f13, THREAD_FPR13(\thread)
+	lwc1	$f14, THREAD_FPR14(\thread)
+	lwc1	$f15, THREAD_FPR15(\thread)
+	lwc1	$f16, THREAD_FPR16(\thread)
+	lwc1	$f17, THREAD_FPR17(\thread)
+	lwc1	$f18, THREAD_FPR18(\thread)
+	lwc1	$f19, THREAD_FPR19(\thread)
+	lwc1	$f20, THREAD_FPR20(\thread)
+	lwc1	$f21, THREAD_FPR21(\thread)
+	lwc1	$f22, THREAD_FPR22(\thread)
+	lwc1	$f23, THREAD_FPR23(\thread)
+	lwc1	$f24, THREAD_FPR24(\thread)
+	lwc1	$f25, THREAD_FPR25(\thread)
+	lwc1	$f26, THREAD_FPR26(\thread)
+	lwc1	$f27, THREAD_FPR27(\thread)
+	lwc1	$f28, THREAD_FPR28(\thread)
+	lwc1	$f29, THREAD_FPR29(\thread)
+	lwc1	$f30, THREAD_FPR30(\thread)
+	lwc1	$f31, THREAD_FPR31(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_32_H */
diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h
new file mode 100644
index 0000000..225feef
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-64.h
@@ -0,0 +1,139 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ASMMACRO_64_H
+#define _ASM_ASMMACRO_64_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+	.macro	fpu_save_16even thread tmp=t0
+	cfc1	\tmp, fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_16odd thread
+	sdc1	$f1,  THREAD_FPR1(\thread)
+	sdc1	$f3,  THREAD_FPR3(\thread)
+	sdc1	$f5,  THREAD_FPR5(\thread)
+	sdc1	$f7,  THREAD_FPR7(\thread)
+	sdc1	$f9,  THREAD_FPR9(\thread)
+	sdc1	$f11, THREAD_FPR11(\thread)
+	sdc1	$f13, THREAD_FPR13(\thread)
+	sdc1	$f15, THREAD_FPR15(\thread)
+	sdc1	$f17, THREAD_FPR17(\thread)
+	sdc1	$f19, THREAD_FPR19(\thread)
+	sdc1	$f21, THREAD_FPR21(\thread)
+	sdc1	$f23, THREAD_FPR23(\thread)
+	sdc1	$f25, THREAD_FPR25(\thread)
+	sdc1	$f27, THREAD_FPR27(\thread)
+	sdc1	$f29, THREAD_FPR29(\thread)
+	sdc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_save_double thread status tmp
+	sll	\tmp, \status, 5
+	bgez	\tmp, 2f
+	fpu_save_16odd \thread
+2:
+	fpu_save_16even \thread \tmp
+	.endm
+
+	.macro	fpu_restore_16even thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_16odd thread
+	ldc1	$f1,  THREAD_FPR1(\thread)
+	ldc1	$f3,  THREAD_FPR3(\thread)
+	ldc1	$f5,  THREAD_FPR5(\thread)
+	ldc1	$f7,  THREAD_FPR7(\thread)
+	ldc1	$f9,  THREAD_FPR9(\thread)
+	ldc1	$f11, THREAD_FPR11(\thread)
+	ldc1	$f13, THREAD_FPR13(\thread)
+	ldc1	$f15, THREAD_FPR15(\thread)
+	ldc1	$f17, THREAD_FPR17(\thread)
+	ldc1	$f19, THREAD_FPR19(\thread)
+	ldc1	$f21, THREAD_FPR21(\thread)
+	ldc1	$f23, THREAD_FPR23(\thread)
+	ldc1	$f25, THREAD_FPR25(\thread)
+	ldc1	$f27, THREAD_FPR27(\thread)
+	ldc1	$f29, THREAD_FPR29(\thread)
+	ldc1	$f31, THREAD_FPR31(\thread)
+	.endm
+
+	.macro	fpu_restore_double thread status tmp
+	sll	\tmp, \status, 5
+	bgez	\tmp, 1f				# 16 register mode?
+
+	fpu_restore_16odd \thread
+1:	fpu_restore_16even \thread \tmp
+	.endm
+
+	.macro	cpu_save_nonscratch thread
+	LONG_S	s0, THREAD_REG16(\thread)
+	LONG_S	s1, THREAD_REG17(\thread)
+	LONG_S	s2, THREAD_REG18(\thread)
+	LONG_S	s3, THREAD_REG19(\thread)
+	LONG_S	s4, THREAD_REG20(\thread)
+	LONG_S	s5, THREAD_REG21(\thread)
+	LONG_S	s6, THREAD_REG22(\thread)
+	LONG_S	s7, THREAD_REG23(\thread)
+	LONG_S	sp, THREAD_REG29(\thread)
+	LONG_S	fp, THREAD_REG30(\thread)
+	.endm
+
+	.macro	cpu_restore_nonscratch thread
+	LONG_L	s0, THREAD_REG16(\thread)
+	LONG_L	s1, THREAD_REG17(\thread)
+	LONG_L	s2, THREAD_REG18(\thread)
+	LONG_L	s3, THREAD_REG19(\thread)
+	LONG_L	s4, THREAD_REG20(\thread)
+	LONG_L	s5, THREAD_REG21(\thread)
+	LONG_L	s6, THREAD_REG22(\thread)
+	LONG_L	s7, THREAD_REG23(\thread)
+	LONG_L	sp, THREAD_REG29(\thread)
+	LONG_L	fp, THREAD_REG30(\thread)
+	LONG_L	ra, THREAD_REG31(\thread)
+	.endm
+
+#endif /* _ASM_ASMMACRO_64_H */
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
new file mode 100644
index 0000000..7a88175
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_H
+#define _ASM_ASMMACRO_H
+
+#include <asm/hazards.h>
+
+#ifdef CONFIG_32BIT
+#include <asm/asmmacro-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/asmmacro-64.h>
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	xori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	_ehb
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	_ehb
+	.endm
+#else
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	xori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_disable_hazard
+	.endm
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Temporary until all gas have MT ASE support
+ */
+	.macro	DMT	reg=0
+	.word	0x41600bc1 | (\reg << 16)
+	.endm
+
+	.macro	EMT	reg=0
+	.word	0x41600be1 | (\reg << 16)
+	.endm
+
+	.macro	DVPE	reg=0
+	.word	0x41600001 | (\reg << 16)
+	.endm
+
+	.macro	EVPE	reg=0
+	.word	0x41600021 | (\reg << 16)
+	.endm
+
+	.macro	MFTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+	.macro	MTTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+#endif /* _ASM_ASMMACRO_H */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
new file mode 100644
index 0000000..1232be3
--- /dev/null
+++ b/arch/mips/include/asm/atomic.h
@@ -0,0 +1,801 @@
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * But use these as seldom as possible since they are much more slower
+ * than regular operations.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/irqflags.h>
+#include <asm/barrier.h>
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)    { (i) }
+
+/*
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/*
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)		((v)->counter = (i))
+
+/*
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_add		\n"
+		"	addu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter += i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %1		# atomic_sub		\n"
+		"	subu	%0, %2					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter -= i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	sc	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqzl	%0, 1b					\n"
+		"	 subu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
+		"	subu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	sc	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqz	%0, 2f					\n"
+		"	 subu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+/*
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/*
+ * atomic_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ */
+#define atomic_dec_if_positive(v)	atomic_sub_if_positive(1, v)
+
+/*
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1, (v))
+
+/*
+ * atomic_dec - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1, (v))
+
+/*
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0)
+
+#ifdef CONFIG_64BIT
+
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)    { (i) }
+
+/*
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ */
+#define atomic64_read(v)	((v)->counter)
+
+/*
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ */
+#define atomic64_set(v, i)	((v)->counter = (i))
+
+/*
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_add		\n"
+		"	addu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter += i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * atomic64_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %1		# atomic64_sub		\n"
+		"	subu	%0, %2					\n"
+		"	scd	%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter));
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		v->counter -= i;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result += i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+		"	scd	%0, %2					\n"
+		"	beqz	%0, 2f					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+/*
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
+{
+	unsigned long result;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqzl	%0, 1b					\n"
+		"	 dsubu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
+		"	dsubu	%0, %1, %3				\n"
+		"	bltz	%0, 1f					\n"
+		"	scd	%0, %2					\n"
+		"	.set	noreorder				\n"
+		"	beqz	%0, 2f					\n"
+		"	 dsubu	%0, %1, %3				\n"
+		"	.set	reorder					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"1:							\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
+		: "Ir" (i), "m" (v->counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		result = v->counter;
+		result -= i;
+		if (result >= 0)
+			v->counter = result;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return result;
+}
+
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1, (v))
+
+/*
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0)
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+/*
+ * atomic64_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ */
+#define atomic64_dec_if_positive(v)	atomic64_sub_if_positive(1, v)
+
+/*
+ * atomic64_inc - increment atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic64_inc(v) atomic64_add(1, (v))
+
+/*
+ * atomic64_dec - decrement and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic64_dec(v) atomic64_sub(1, (v))
+
+/*
+ * atomic64_add_negative - add and test if negative
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * atomic*_return operations are serializing but not the non-*_return
+ * versions.
+ */
+#define smp_mb__before_atomic_dec()	smp_llsc_mb()
+#define smp_mb__after_atomic_dec()	smp_llsc_mb()
+#define smp_mb__before_atomic_inc()	smp_llsc_mb()
+#define smp_mb__after_atomic_inc()	smp_llsc_mb()
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mips/include/asm/auxvec.h b/arch/mips/include/asm/auxvec.h
new file mode 100644
index 0000000..7cf7f2d
--- /dev/null
+++ b/arch/mips/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif /* _ASM_AUXVEC_H */
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
new file mode 100644
index 0000000..8e9ac31
--- /dev/null
+++ b/arch/mips/include/asm/barrier.h
@@ -0,0 +1,155 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+
+#define read_barrier_depends()		do { } while(0)
+#define smp_read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_CPU_HAS_SYNC
+#define __sync()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		".set	mips2\n\t"		\
+		"sync\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: /* no input */		\
+		: "memory")
+#else
+#define __sync()	do { } while(0)
+#endif
+
+#define __fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"nop\n\t"			\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1)		\
+		: "memory")
+
+#define fast_wmb()	__sync()
+#define fast_rmb()	__sync()
+#define fast_mb()	__sync()
+#ifdef CONFIG_SGI_IP28
+#define fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"sync\n\t"			\
+		"lw	$0,%0\n\t"		\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
+		: "memory")
+#else
+#define fast_iob()				\
+	do {					\
+		__sync();			\
+		__fast_iob();			\
+	} while (0)
+#endif
+
+#ifdef CONFIG_CPU_HAS_WB
+
+#include <asm/wbflush.h>
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		wbflush()
+#define iob()		wbflush()
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		fast_mb()
+#define iob()		fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
+#define __WEAK_ORDERING_MB	"       sync	\n"
+#else
+#define __WEAK_ORDERING_MB	"		\n"
+#endif
+#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
+#define __WEAK_LLSC_MB		"       sync	\n"
+#else
+#define __WEAK_LLSC_MB		"		\n"
+#endif
+
+#define smp_mb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_rmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_wmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+
+#define set_mb(var, value) \
+	do { var = value; smp_mb(); } while (0)
+
+#define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_rmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_wmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
new file mode 100644
index 0000000..0ba9d6e
--- /dev/null
+++ b/arch/mips/include/asm/bcache.h
@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1997, 1999 by Ralf Baechle
+ * Copyright (c) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BCACHE_H
+#define _ASM_BCACHE_H
+
+
+/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
+   chipset implemented caches.  On machines with other CPUs the CPU does the
+   cache thing itself. */
+struct bcache_ops {
+	void (*bc_enable)(void);
+	void (*bc_disable)(void);
+	void (*bc_wback_inv)(unsigned long page, unsigned long size);
+	void (*bc_inv)(unsigned long page, unsigned long size);
+};
+
+extern void indy_sc_init(void);
+
+#ifdef CONFIG_BOARD_SCACHE
+
+extern struct bcache_ops *bcops;
+
+static inline void bc_enable(void)
+{
+	bcops->bc_enable();
+}
+
+static inline void bc_disable(void)
+{
+	bcops->bc_disable();
+}
+
+static inline void bc_wback_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_wback_inv(page, size);
+}
+
+static inline void bc_inv(unsigned long page, unsigned long size)
+{
+	bcops->bc_inv(page, size);
+}
+
+#else /* !defined(CONFIG_BOARD_SCACHE) */
+
+/* Not R4000 / R4400 / R4600 / R5000.  */
+
+#define bc_enable() do { } while (0)
+#define bc_disable() do { } while (0)
+#define bc_wback_inv(page, size) do { } while (0)
+#define bc_inv(page, size) do { } while (0)
+
+#endif /* !defined(CONFIG_BOARD_SCACHE) */
+
+#endif /* _ASM_BCACHE_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
new file mode 100644
index 0000000..49df8c4
--- /dev/null
+++ b/arch/mips/include/asm/bitops.h
@@ -0,0 +1,672 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994 - 1997, 99, 2000, 06, 07  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+#include <asm/bug.h>
+#include <asm/byteorder.h>		/* sigh ... */
+#include <asm/cpu-features.h>
+#include <asm/sgidefs.h>
+#include <asm/war.h>
+
+#if _MIPS_SZLONG == 32
+#define SZLONG_LOG 5
+#define SZLONG_MASK 31UL
+#define __LL		"ll	"
+#define __SC		"sc	"
+#define __INS		"ins    "
+#define __EXT		"ext    "
+#elif _MIPS_SZLONG == 64
+#define SZLONG_LOG 6
+#define SZLONG_MASK 63UL
+#define __LL		"lld	"
+#define __SC		"scd	"
+#define __INS		"dins    "
+#define __EXT		"dext    "
+#endif
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	smp_llsc_mb()
+#define smp_mb__after_clear_bit()	smp_llsc_mb()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	" __SC	"%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(bit)) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	" __INS "%0, %4, %2, 1				\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (bit), "m" (*m), "r" (~0));
+#endif /* CONFIG_CPU_MIPSR2 */
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# set_bit	\n"
+		"	or	%0, %2					\n"
+		"	" __SC	"%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long temp;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqzl	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << bit)), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(bit)) {
+		__asm__ __volatile__(
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	" __INS "%0, $0, %2, 1				\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (bit), "m" (*m));
+#endif /* CONFIG_CPU_MIPSR2 */
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1			# clear_bit	\n"
+		"	and	%0, %2					\n"
+		"	" __SC "%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (~(1UL << bit)), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a &= ~mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(nr, addr);
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3				\n"
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	" __SC	"%0, %1				\n"
+		"	beqzl	%0, 1b				\n"
+		"	.set	mips0				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3				\n"
+		"1:	" __LL "%0, %1		# change_bit	\n"
+		"	xor	%0, %2				\n"
+		"	" __SC	"%0, %1				\n"
+		"	beqz	%0, 2f				\n"
+		"	.subsection 2				\n"
+		"2:	b	1b				\n"
+		"	.previous				\n"
+		"	.set	mips0				\n"
+		: "=&r" (temp), "=m" (*m)
+		: "ir" (1UL << bit), "m" (*m));
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		*a ^= mask;
+		raw_local_irq_restore(flags);
+	}
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+/*
+ * test_and_set_bit_lock - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and implies acquire ordering semantics
+ * after the memory operation.
+ */
+static inline int test_and_set_bit_lock(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a |= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+		"	" __SC 	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+#ifdef CONFIG_CPU_MIPSR2
+	} else if (__builtin_constant_p(nr)) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	" __EXT "%2, %0, %3, 1				\n"
+		"	" __INS	"%0, $0, %3, 1				\n"
+		"	" __SC 	"%0, %1					\n"
+		"	beqz	%0, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "ir" (bit), "m" (*m)
+		: "memory");
+#endif
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
+		"	or	%2, %0, %3				\n"
+		"	xor	%2, %3					\n"
+		"	" __SC 	"%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a &= ~mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned long nr,
+	volatile unsigned long *addr)
+{
+	unsigned short bit = nr & SZLONG_MASK;
+	unsigned long res;
+
+	smp_llsc_mb();
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
+		"	xor	%2, %0, %3				\n"
+		"	" __SC	"%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	and	%2, %0, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	push					\n"
+		"	.set	noreorder				\n"
+		"	.set	mips3					\n"
+		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
+		"	xor	%2, %0, %3				\n"
+		"	" __SC	"\t%2, %1				\n"
+		"	beqz	%2, 2f					\n"
+		"	 and	%2, %0, %3				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	pop					\n"
+		: "=&r" (temp), "=m" (*m), "=&r" (res)
+		: "r" (1UL << bit), "m" (*m)
+		: "memory");
+	} else {
+		volatile unsigned long *a = addr;
+		unsigned long mask;
+		unsigned long flags;
+
+		a += nr >> SZLONG_LOG;
+		mask = 1UL << bit;
+		raw_local_irq_save(flags);
+		res = (mask & *a);
+		*a ^= mask;
+		raw_local_irq_restore(flags);
+	}
+
+	smp_llsc_mb();
+
+	return res != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ */
+static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	smp_mb();
+	__clear_bit(nr, addr);
+}
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
+/*
+ * Return the bit position (0..63) of the most significant 1 bit in a word
+ * Returns -1 if no 1 bit exists
+ */
+static inline unsigned long __fls(unsigned long x)
+{
+	int lz;
+
+	if (sizeof(x) == 4) {
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips32					\n"
+		"	clz	%0, %1					\n"
+		"	.set	pop					\n"
+		: "=r" (lz)
+		: "r" (x));
+
+		return 31 - lz;
+	}
+
+	BUG_ON(sizeof(x) != 8);
+
+	__asm__(
+	"	.set	push						\n"
+	"	.set	mips64						\n"
+	"	dclz	%0, %1						\n"
+	"	.set	pop						\n"
+	: "=r" (lz)
+	: "r" (x));
+
+	return 63 - lz;
+}
+
+/*
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Returns 0..SZLONG-1
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	return __fls(word & -word);
+}
+
+/*
+ * fls - find last bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static inline int fls(int word)
+{
+	__asm__("clz %0, %1" : "=r" (word) : "r" (word));
+
+	return 32 - word;
+}
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
+static inline int fls64(__u64 word)
+{
+	__asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+
+	return 64 - word;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
+
+/*
+ * ffs - find first bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int word)
+{
+	if (!word)
+		return 0;
+
+	return fls(word & -word);
+}
+
+#else
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
new file mode 100644
index 0000000..610fe3a
--- /dev/null
+++ b/arch/mips/include/asm/bootinfo.h
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2003 by Ralf Baechle
+ * Copyright (C) 1995, 1996 Andreas Busse
+ * Copyright (C) 1995, 1996 Stoned Elipot
+ * Copyright (C) 1995, 1996 Paul M. Antoine.
+ */
+#ifndef _ASM_BOOTINFO_H
+#define _ASM_BOOTINFO_H
+
+#include <linux/types.h>
+#include <asm/setup.h>
+
+/*
+ * The MACH_ IDs are sort of equivalent to PCI product IDs.  As such the
+ * numbers do not necessarily reflect technical relations or similarities
+ * between systems.
+ */
+
+/*
+ * Valid machtype values for group unknown
+ */
+#define  MACH_UNKNOWN		0	/* whatever...			*/
+
+/*
+ * Valid machtype for group DEC
+ */
+#define  MACH_DSUNKNOWN		0
+#define  MACH_DS23100		1	/* DECstation 2100 or 3100	*/
+#define  MACH_DS5100		2	/* DECsystem 5100		*/
+#define  MACH_DS5000_200	3	/* DECstation 5000/200		*/
+#define  MACH_DS5000_1XX	4	/* DECstation 5000/120, 125, 133, 150 */
+#define  MACH_DS5000_XX		5	/* DECstation 5000/20, 25, 33, 50 */
+#define  MACH_DS5000_2X0	6	/* DECstation 5000/240, 260	*/
+#define  MACH_DS5400		7	/* DECsystem 5400		*/
+#define  MACH_DS5500		8	/* DECsystem 5500		*/
+#define  MACH_DS5800		9	/* DECsystem 5800		*/
+#define  MACH_DS5900		10	/* DECsystem 5900		*/
+
+/*
+ * Valid machtype for group PMC-MSP
+ */
+#define MACH_MSP4200_EVAL       0	/* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW         1	/* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA       2	/* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL       3	/* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW         4	/* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
+
+/*
+ * Valid machtype for group Mikrotik
+ */
+#define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
+#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+
+#define CL_SIZE			COMMAND_LINE_SIZE
+
+extern char *system_type;
+const char *get_system_type(void);
+
+extern unsigned long mips_machtype;
+
+#define BOOT_MEM_MAP_MAX	32
+#define BOOT_MEM_RAM		1
+#define BOOT_MEM_ROM_DATA	2
+#define BOOT_MEM_RESERVED	3
+
+/*
+ * A memory map that's built upon what was determined
+ * or specified on the command line.
+ */
+struct boot_mem_map {
+	int nr_map;
+	struct boot_mem_map_entry {
+		phys_t addr;	/* start of memory segment */
+		phys_t size;	/* size of memory segment */
+		long type;		/* type of memory segment */
+	} map[BOOT_MEM_MAP_MAX];
+};
+
+extern struct boot_mem_map boot_mem_map;
+
+extern void add_memory_region(phys_t start, phys_t size, long type);
+
+extern void prom_init(void);
+extern void prom_free_prom_memory(void);
+
+extern void free_init_pages(const char *what,
+			    unsigned long begin, unsigned long end);
+
+/*
+ * Initial kernel command line, usually setup by prom_init()
+ */
+extern char arcs_cmdline[CL_SIZE];
+
+/*
+ * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware
+ */
+extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+/*
+ * Platform memory detection hook called by setup_arch
+ */
+extern void plat_mem_setup(void);
+
+#endif /* _ASM_BOOTINFO_H */
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
new file mode 100644
index 0000000..37c6857
--- /dev/null
+++ b/arch/mips/include/asm/branch.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle
+ */
+#ifndef _ASM_BRANCH_H
+#define _ASM_BRANCH_H
+
+#include <asm/ptrace.h>
+
+static inline int delay_slot(struct pt_regs *regs)
+{
+	return regs->cp0_cause & CAUSEF_BD;
+}
+
+static inline unsigned long exception_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs))
+		return regs->cp0_epc;
+
+	return regs->cp0_epc + 4;
+}
+
+extern int __compute_return_epc(struct pt_regs *regs);
+
+static inline int compute_return_epc(struct pt_regs *regs)
+{
+	if (!delay_slot(regs)) {
+		regs->cp0_epc += 4;
+		return 0;
+	}
+
+	return __compute_return_epc(regs);
+}
+
+#endif /* _ASM_BRANCH_H */
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
new file mode 100644
index 0000000..25b980c
--- /dev/null
+++ b/arch/mips/include/asm/break.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems.  Linux/MIPS doesn't use all of them.  The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP	0	/* User bp (used by debuggers) */
+#define BRK_KERNELBP	1	/* Break in the kernel */
+#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
+#define BRK_OVERFLOW	6	/* Overflow check */
+#define BRK_DIVZERO	7	/* Divide by zero check */
+#define BRK_RANGE	8	/* Range error check */
+#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
+#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
+#define BRK_BUG		512	/* Used by BUG() */
+#define BRK_KDB		513	/* Used in KDB_ENTER() */
+#define BRK_MULOVF	1023	/* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
new file mode 100644
index 0000000..7eb63de
--- /dev/null
+++ b/arch/mips/include/asm/bug.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_BUG_H
+#define __ASM_BUG_H
+
+#include <asm/sgidefs.h>
+
+#ifdef CONFIG_BUG
+
+#include <asm/break.h>
+
+#define BUG()								\
+do {									\
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
+} while (0)
+
+#define HAVE_ARCH_BUG
+
+#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
+
+#define BUG_ON(condition)						\
+do {									\
+	__asm__ __volatile__("tne $0, %0, %1"				\
+			     : : "r" (condition), "i" (BRK_BUG));	\
+} while (0)
+
+#define HAVE_ARCH_BUG_ON
+
+#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */
+
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_BUG_H */
diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h
new file mode 100644
index 0000000..9dc10df
--- /dev/null
+++ b/arch/mips/include/asm/bugs.h
@@ -0,0 +1,53 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Copyright (C) 2007  Maciej W. Rozycki
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+
+extern int daddiu_bug;
+
+extern void check_bugs64_early(void);
+
+extern void check_bugs32(void);
+extern void check_bugs64(void);
+
+static inline void check_bugs_early(void)
+{
+#ifdef CONFIG_64BIT
+	check_bugs64_early();
+#endif
+}
+
+static inline void check_bugs(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	cpu_data[cpu].udelay_val = loops_per_jiffy;
+	check_bugs32();
+#ifdef CONFIG_64BIT
+	check_bugs64();
+#endif
+}
+
+static inline int r4k_daddiu_bug(void)
+{
+#ifdef CONFIG_64BIT
+	WARN_ON(daddiu_bug < 0);
+	return daddiu_bug != 0;
+#else
+	return 0;
+#endif
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
new file mode 100644
index 0000000..fe7dc2d
--- /dev/null
+++ b/arch/mips/include/asm/byteorder.h
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_CPU_MIPSR2
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__(
+	"	wsbh	%0, %1			\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+#define __arch__swab16(x)	___arch__swab16(x)
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__(
+	"	wsbh	%0, %1			\n"
+	"	rotr	%0, %0, 16		\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+#define __arch__swab32(x)	___arch__swab32(x)
+
+#ifdef CONFIG_CPU_MIPS64_R2
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	__asm__(
+	"	dsbh	%0, %1			\n"
+	"	dshd	%0, %0			\n"
+	"	drotr	%0, %0, 32		\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+#define __arch__swab64(x)	___arch__swab64(x)
+
+#endif /* CONFIG_CPU_MIPS64_R2 */
+
+#endif /* CONFIG_CPU_MIPSR2 */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#if defined(__MIPSEB__)
+#  include <linux/byteorder/big_endian.h>
+#elif defined(__MIPSEL__)
+#  include <linux/byteorder/little_endian.h>
+#else
+#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
new file mode 100644
index 0000000..37f175c
--- /dev/null
+++ b/arch/mips/include/asm/cache.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <kmalloc.h>
+
+#define L1_CACHE_SHIFT		CONFIG_MIPS_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_SHIFT		L1_CACHE_SHIFT
+#define SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h
new file mode 100644
index 0000000..f3ce721
--- /dev/null
+++ b/arch/mips/include/asm/cachectl.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ */
+#ifndef	_ASM_CACHECTL
+#define	_ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE	0	/* make pages cacheable */
+#define UNCACHEABLE	1	/* make pages uncacheable */
+
+#endif	/* _ASM_CACHECTL */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
new file mode 100644
index 0000000..03b1d69
--- /dev/null
+++ b/arch/mips/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+#include <asm/cpu-features.h>
+
+/* Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *  - flush_icache_range(start, end) flush a range of instructions
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *
+ * MIPS specific flush operations:
+ *
+ *  - flush_cache_sigtramp() flush signal trampoline
+ *  - flush_icache_all() flush the entire instruction cache
+ *  - flush_data_cache_page() flushes a page from the data cache
+ */
+extern void (*flush_cache_all)(void);
+extern void (*__flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+extern void __flush_dcache_page(struct page *page);
+
+static inline void flush_dcache_page(struct page *page)
+{
+	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
+		__flush_dcache_page(page);
+
+}
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *, unsigned long);
+static inline void flush_anon_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vmaddr)
+{
+	if (cpu_has_dc_aliases && PageAnon(page))
+		__flush_anon_page(page, vmaddr);
+}
+
+static inline void flush_icache_page(struct vm_area_struct *vma,
+	struct page *page)
+{
+}
+
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+	if (cpu_has_dc_aliases)
+		__flush_cache_vunmap();
+}
+
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void (*flush_cache_sigtramp)(unsigned long addr);
+extern void (*flush_icache_all)(void);
+extern void (*local_flush_data_cache_page)(void * addr);
+extern void (*flush_data_cache_page)(unsigned long addr);
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty			PG_arch_1
+
+#define Page_dcache_dirty(page)		\
+	test_bit(PG_dcache_dirty, &(page)->flags)
+#define SetPageDcacheDirty(page)	\
+	set_bit(PG_dcache_dirty, &(page)->flags)
+#define ClearPageDcacheDirty(page)	\
+	clear_bit(PG_dcache_dirty, &(page)->flags)
+
+/* Run kernel code uncached, useful for cache probing functions. */
+unsigned long run_uncached(void *func);
+
+extern void *kmap_coherent(struct page *page, unsigned long addr);
+extern void kunmap_coherent(void);
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
new file mode 100644
index 0000000..256ad2c
--- /dev/null
+++ b/arch/mips/include/asm/cacheops.h
@@ -0,0 +1,85 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef	__ASM_CACHEOPS_H
+#define	__ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I      0x00
+#define Index_Writeback_Inv_D   0x01
+#define Index_Load_Tag_I	0x04
+#define Index_Load_Tag_D	0x05
+#define Index_Store_Tag_I	0x08
+#define Index_Store_Tag_D	0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I    	0x00
+#else
+#define Hit_Invalidate_I	0x10
+#endif
+#define Hit_Invalidate_D	0x11
+#define Hit_Writeback_Inv_D	0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D	0x0d
+#define Fill			0x14
+#define Hit_Writeback_I		0x18
+#define Hit_Writeback_D		0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI     0x02
+#define Index_Writeback_Inv_SD  0x03
+#define Index_Load_Tag_SI	0x06
+#define Index_Load_Tag_SD	0x07
+#define Index_Store_Tag_SI	0x0A
+#define Index_Store_Tag_SD	0x0B
+#define Create_Dirty_Excl_SD	0x0f
+#define Hit_Invalidate_SI	0x12
+#define Hit_Invalidate_SD	0x13
+#define Hit_Writeback_Inv_SD	0x17
+#define Hit_Writeback_SD	0x1b
+#define Hit_Set_Virtual_SI	0x1e
+#define Hit_Set_Virtual_SD	0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S	0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T	0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S	0x03
+#define Index_Load_Tag_S	0x07
+#define Index_Store_Tag_S	0x0B
+#define Hit_Invalidate_S	0x13
+#define Cache_Barrier		0x14
+#define Hit_Writeback_Inv_S	0x17
+#define Index_Load_Data_I	0x18
+#define Index_Load_Data_D	0x19
+#define Index_Load_Data_S	0x1b
+#define Index_Store_Data_I	0x1c
+#define Index_Store_Data_D	0x1d
+#define Index_Store_Data_S	0x1f
+
+#endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
new file mode 100644
index 0000000..290485a
--- /dev/null
+++ b/arch/mips/include/asm/checksum.h
@@ -0,0 +1,260 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Thiemo Seufer.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+__wsum __csum_partial_copy_user(const void *src, void *dst,
+				int len, __wsum sum, int *err_ptr);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+				   __wsum sum, int *err_ptr)
+{
+	might_sleep();
+	return __csum_partial_copy_user((__force void *)src, dst,
+					len, sum, err_ptr);
+}
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+			     __wsum sum, int *err_ptr)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return __csum_partial_copy_user(src, (__force void *)dst,
+						len, sum, err_ptr);
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+
+/*
+ * the same as csum_partial, but copies from user space (but on MIPS
+ * we have just one address space, so this is identical to the above)
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				       int len, __wsum sum);
+
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_fold\n"
+	"	.set	noat		\n"
+	"	sll	$1, %0, 16	\n"
+	"	addu	%0, $1		\n"
+	"	sltu	$1, %0, $1	\n"
+	"	srl	%0, %0, 16	\n"
+	"	addu	%0, $1		\n"
+	"	xori	%0, 0xffff	\n"
+	"	.set	pop"
+	: "=r" (sum)
+	: "0" (sum));
+
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	const unsigned int *word = iph;
+	const unsigned int *stop = word + ihl;
+	unsigned int csum;
+	int carry;
+
+	csum = word[0];
+	csum += word[1];
+	carry = (csum < word[1]);
+	csum += carry;
+
+	csum += word[2];
+	carry = (csum < word[2]);
+	csum += carry;
+
+	csum += word[3];
+	carry = (csum < word[3]);
+	csum += carry;
+
+	word += 4;
+	do {
+		csum += *word;
+		carry = (csum < *word);
+		csum += carry;
+		word++;
+	} while (word != stop);
+
+	return csum_fold(csum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr,
+	__be32 daddr, unsigned short len, unsigned short proto,
+	__wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_tcpudp_nofold\n"
+	"	.set	noat		\n"
+#ifdef CONFIG_32BIT
+	"	addu	%0, %2		\n"
+	"	sltu	$1, %0, %2	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %3		\n"
+	"	sltu	$1, %0, %3	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %4		\n"
+	"	sltu	$1, %0, %4	\n"
+	"	addu	%0, $1		\n"
+#endif
+#ifdef CONFIG_64BIT
+	"	daddu	%0, %2		\n"
+	"	daddu	%0, %3		\n"
+	"	daddu	%0, %4		\n"
+	"	dsll32	$1, %0, 0	\n"
+	"	daddu	%0, $1		\n"
+	"	dsra32	%0, %0, 0	\n"
+#endif
+	"	.set	pop"
+	: "=r" (sum)
+	: "0" ((__force unsigned long)daddr),
+	  "r" ((__force unsigned long)saddr),
+#ifdef __MIPSEL__
+	  "r" ((proto + len) << 8),
+#else
+	  "r" (proto + len),
+#endif
+	  "r" ((__force unsigned long)sum));
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				          const struct in6_addr *daddr,
+					  __u32 len, unsigned short proto,
+					  __wsum sum)
+{
+	__asm__(
+	"	.set	push		# csum_ipv6_magic\n"
+	"	.set	noreorder	\n"
+	"	.set	noat		\n"
+	"	addu	%0, %5		# proto (long in network byte order)\n"
+	"	sltu	$1, %0, %5	\n"
+	"	addu	%0, $1		\n"
+
+	"	addu	%0, %6		# csum\n"
+	"	sltu	$1, %0, %6	\n"
+	"	lw	%1, 0(%2)	# four words source address\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 4(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 8(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 12(%2)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 0(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 4(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 8(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	lw	%1, 12(%3)	\n"
+	"	addu	%0, $1		\n"
+	"	addu	%0, %1		\n"
+	"	sltu	$1, %0, %1	\n"
+
+	"	addu	%0, $1		# Add final carry\n"
+	"	.set	pop"
+	: "=r" (sum), "=r" (proto)
+	: "r" (saddr), "r" (daddr),
+	  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mips/include/asm/cmp.h b/arch/mips/include/asm/cmp.h
new file mode 100644
index 0000000..89a73fb
--- /dev/null
+++ b/arch/mips/include/asm/cmp.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_CMP_H
+#define _ASM_CMP_H
+
+/*
+ * Definitions for CMP multitasking on MIPS cores
+ */
+struct task_struct;
+
+extern void cmp_smp_setup(void);
+extern void cmp_smp_finish(void);
+extern void cmp_boot_secondary(int cpu, struct task_struct *t);
+extern void cmp_init_secondary(void);
+extern void cmp_cpus_done(void);
+extern void cmp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void cmp_send_ipi(int cpu, unsigned int action);
+#endif /*  _ASM_CMP_H */
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
new file mode 100644
index 0000000..4a812c3
--- /dev/null
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/irqflags.h>
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define __cmpxchg_asm(ld, st, m, old, new)				\
+({									\
+	__typeof(*(m)) __ret;						\
+									\
+	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"	bne	%0, %z3, 2f			\n"	\
+		"	.set	mips0				\n"	\
+		"	move	$1, %z4				\n"	\
+		"	.set	mips3				\n"	\
+		"	" st "	$1, %1				\n"	\
+		"	beqzl	$1, 1b				\n"	\
+		"2:						\n"	\
+		"	.set	pop				\n"	\
+		: "=&r" (__ret), "=R" (*m)				\
+		: "R" (*m), "Jr" (old), "Jr" (new)			\
+		: "memory");						\
+	} else if (cpu_has_llsc) {					\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"	bne	%0, %z3, 2f			\n"	\
+		"	.set	mips0				\n"	\
+		"	move	$1, %z4				\n"	\
+		"	.set	mips3				\n"	\
+		"	" st "	$1, %1				\n"	\
+		"	beqz	$1, 3f				\n"	\
+		"2:						\n"	\
+		"	.subsection 2				\n"	\
+		"3:	b	1b				\n"	\
+		"	.previous				\n"	\
+		"	.set	pop				\n"	\
+		: "=&r" (__ret), "=R" (*m)				\
+		: "R" (*m), "Jr" (old), "Jr" (new)			\
+		: "memory");						\
+	} else {							\
+		unsigned long __flags;					\
+									\
+		raw_local_irq_save(__flags);				\
+		__ret = *m;						\
+		if (__ret == old)					\
+			*m = new;					\
+		raw_local_irq_restore(__flags);				\
+	}								\
+									\
+	__ret;								\
+})
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __cmpxchg(ptr, old, new, barrier)				\
+({									\
+	__typeof__(ptr) __ptr = (ptr);					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	__typeof__(*(ptr)) __res = 0;					\
+									\
+	barrier;							\
+									\
+	switch (sizeof(*(__ptr))) {					\
+	case 4:								\
+		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new);	\
+		break;							\
+	case 8:								\
+		if (sizeof(long) == 8) {				\
+			__res = __cmpxchg_asm("lld", "scd", __ptr,	\
+					   __old, __new);		\
+			break;						\
+		}							\
+	default:							\
+		__cmpxchg_called_with_bad_pointer();			\
+		break;							\
+	}								\
+									\
+	barrier;							\
+									\
+	__res;								\
+})
+
+#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, )
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+
+#ifdef CONFIG_64BIT
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#endif /* __ASM_CMPXCHG_H */
diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h
new file mode 100644
index 0000000..368a99e
--- /dev/null
+++ b/arch/mips/include/asm/compat-signal.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_COMPAT_SIGNAL_H
+#define __ASM_COMPAT_SIGNAL_H
+
+#include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+#include <asm/uaccess.h>
+
+#define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+		} _kill;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_uid_t _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_clock_t _utime;
+			int _status;		/* exit code */
+			compat_clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			s32 _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			compat_uid_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+	} _sifields;
+} compat_siginfo_t;
+
+static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
+	const sigset_t *s)
+{
+	int err;
+
+	BUG_ON(sizeof(*d) != sizeof(*s));
+	BUG_ON(_NSIG_WORDS != 2);
+
+	err  = __put_user(s->sig[0],       &d->sig[0]);
+	err |= __put_user(s->sig[0] >> 32, &d->sig[1]);
+	err |= __put_user(s->sig[1],       &d->sig[2]);
+	err |= __put_user(s->sig[1] >> 32, &d->sig[3]);
+
+	return err;
+}
+
+static inline int __copy_conv_sigset_from_user(sigset_t *d,
+	const compat_sigset_t __user *s)
+{
+	int err;
+	union sigset_u {
+		sigset_t	s;
+		compat_sigset_t c;
+	} *u = (union sigset_u *) d;
+
+	BUG_ON(sizeof(*d) != sizeof(*s));
+	BUG_ON(_NSIG_WORDS != 2);
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	err  = __get_user(u->c.sig[1], &s->sig[0]);
+	err |= __get_user(u->c.sig[0], &s->sig[1]);
+	err |= __get_user(u->c.sig[3], &s->sig[2]);
+	err |= __get_user(u->c.sig[2], &s->sig[3]);
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	err  = __get_user(u->c.sig[0], &s->sig[0]);
+	err |= __get_user(u->c.sig[1], &s->sig[1]);
+	err |= __get_user(u->c.sig[2], &s->sig[2]);
+	err |= __get_user(u->c.sig[3], &s->sig[3]);
+#endif
+
+	return err;
+}
+
+#endif /* __ASM_COMPAT_SIGNAL_H */
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
new file mode 100644
index 0000000..ac5d541
--- /dev/null
+++ b/arch/mips/include/asm/compat.h
@@ -0,0 +1,221 @@
+#ifndef _ASM_COMPAT_H
+#define _ASM_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_suseconds_t;
+
+typedef s32		compat_pid_t;
+typedef s32		__compat_uid_t;
+typedef s32		__compat_gid_t;
+typedef __compat_uid_t	__compat_uid32_t;
+typedef __compat_gid_t	__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u32		compat_nlink_t;
+typedef s32		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef s32		compat_caddr_t;
+typedef struct {
+	s32	val[2];
+} compat_fsid_t;
+typedef s32		compat_timer_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	s32		st_pad1[3];
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	s32		st_pad2[2];
+	compat_off_t	st_size;
+	s32		st_pad3;
+	compat_time_t	st_atime;
+	s32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	s32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	s32		st_ctime_nsec;
+	s32		st_blksize;
+	s32		st_blocks;
+	s32		st_pad4[14];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	s32		l_sysid;
+	compat_pid_t	l_pid;
+	short		__unused;
+	s32		pad[4];
+};
+
+#define F_GETLK64	33
+#define F_SETLK64	34
+#define F_SETLKW64	35
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_frsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_files;
+	int		f_ffree;
+	int		f_bavail;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;
+	int		f_spare[6];
+};
+
+#define COMPAT_RLIM_INFINITY	0x7fffffffUL
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...  */
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	/* cast to a __user pointer via "unsigned long" makes sparse happy */
+	return (void __user *)(unsigned long)(long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = (struct pt_regs *)
+		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
+
+	return (void __user *) (regs->regs[29] - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	compat_mode_t mode;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t	sem_otime;
+	compat_time_t	sem_ctime;
+	compat_ulong_t	sem_nsems;
+	compat_ulong_t	__unused1;
+	compat_ulong_t	__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused1;
+#endif
+	compat_time_t	msg_stime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused1;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused2;
+#endif
+	compat_time_t	msg_rtime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused2;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused3;
+#endif
+	compat_time_t	msg_ctime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	compat_ulong_t	__unused3;
+#endif
+	compat_ulong_t	msg_cbytes;
+	compat_ulong_t	msg_qnum;
+	compat_ulong_t	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	compat_ulong_t	__unused4;
+	compat_ulong_t	__unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t	shm_segsz;
+	compat_time_t	shm_atime;
+	compat_time_t	shm_dtime;
+	compat_time_t	shm_ctime;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	compat_ulong_t	shm_nattch;
+	compat_ulong_t	__unused1;
+	compat_ulong_t	__unused2;
+};
+
+#endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
new file mode 100644
index 0000000..71f5c5c
--- /dev/null
+++ b/arch/mips/include/asm/compiler.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004, 2007  Maciej W. Rozycki
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_COMPILER_H
+#define _ASM_COMPILER_H
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+#define GCC_IMM_ASM() "n"
+#define GCC_REG_ACCUM "$0"
+#else
+#define GCC_IMM_ASM() "rn"
+#define GCC_REG_ACCUM "accum"
+#endif
+
+#endif /* _ASM_COMPILER_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
new file mode 100644
index 0000000..5ea701f
--- /dev/null
+++ b/arch/mips/include/asm/cpu-features.h
@@ -0,0 +1,219 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_FEATURES_H
+#define __ASM_CPU_FEATURES_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <cpu-feature-overrides.h>
+
+#ifndef current_cpu_type
+#define current_cpu_type()      current_cpu_data.cputype
+#endif
+
+/*
+ * SMP assumption: Options of CPU 0 are a superset of all processors.
+ * This is true for all known MIPS systems.
+ */
+#ifndef cpu_has_tlb
+#define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
+#endif
+#ifndef cpu_has_4kex
+#define cpu_has_4kex		(cpu_data[0].options & MIPS_CPU_4KEX)
+#endif
+#ifndef cpu_has_3k_cache
+#define cpu_has_3k_cache	(cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#endif
+#define cpu_has_6k_cache	0
+#define cpu_has_8k_cache	0
+#ifndef cpu_has_4k_cache
+#define cpu_has_4k_cache	(cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#endif
+#ifndef cpu_has_tx39_cache
+#define cpu_has_tx39_cache	(cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#endif
+#ifndef cpu_has_fpu
+#define cpu_has_fpu		(current_cpu_data.options & MIPS_CPU_FPU)
+#define raw_cpu_has_fpu		(raw_current_cpu_data.options & MIPS_CPU_FPU)
+#else
+#define raw_cpu_has_fpu		cpu_has_fpu
+#endif
+#ifndef cpu_has_32fpr
+#define cpu_has_32fpr		(cpu_data[0].options & MIPS_CPU_32FPR)
+#endif
+#ifndef cpu_has_counter
+#define cpu_has_counter		(cpu_data[0].options & MIPS_CPU_COUNTER)
+#endif
+#ifndef cpu_has_watch
+#define cpu_has_watch		(cpu_data[0].options & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_has_divec
+#define cpu_has_divec		(cpu_data[0].options & MIPS_CPU_DIVEC)
+#endif
+#ifndef cpu_has_vce
+#define cpu_has_vce		(cpu_data[0].options & MIPS_CPU_VCE)
+#endif
+#ifndef cpu_has_cache_cdex_p
+#define cpu_has_cache_cdex_p	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P)
+#endif
+#ifndef cpu_has_cache_cdex_s
+#define cpu_has_cache_cdex_s	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S)
+#endif
+#ifndef cpu_has_prefetch
+#define cpu_has_prefetch	(cpu_data[0].options & MIPS_CPU_PREFETCH)
+#endif
+#ifndef cpu_has_mcheck
+#define cpu_has_mcheck		(cpu_data[0].options & MIPS_CPU_MCHECK)
+#endif
+#ifndef cpu_has_ejtag
+#define cpu_has_ejtag		(cpu_data[0].options & MIPS_CPU_EJTAG)
+#endif
+#ifndef cpu_has_llsc
+#define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
+#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
+#endif
+#ifndef cpu_has_mdmx
+#define cpu_has_mdmx           (cpu_data[0].ases & MIPS_ASE_MDMX)
+#endif
+#ifndef cpu_has_mips3d
+#define cpu_has_mips3d         (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#endif
+#ifndef cpu_has_smartmips
+#define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#endif
+#ifndef cpu_has_vtag_icache
+#define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
+#endif
+#ifndef cpu_has_dc_aliases
+#define cpu_has_dc_aliases	(cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES)
+#endif
+#ifndef cpu_has_ic_fills_f_dc
+#define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
+#endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
+
+/*
+ * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+ * such as the R10000 have I-Caches that snoop local stores; the embedded ones
+ * don't.  For maintaining I-cache coherency this means we need to flush the
+ * D-cache all the way back to whever the I-cache does refills from, so the
+ * I-cache has a chance to see the new data at all.  Then we have to flush the
+ * I-cache also.
+ * Note we may have been rescheduled and may no longer be running on the CPU
+ * that did the store so we can't optimize this into only doing the flush on
+ * the local CPU.
+ */
+#ifndef cpu_icache_snoops_remote_store
+#ifdef CONFIG_SMP
+#define cpu_icache_snoops_remote_store	(cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE)
+#else
+#define cpu_icache_snoops_remote_store	1
+#endif
+#endif
+
+# ifndef cpu_has_mips32r1
+# define cpu_has_mips32r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
+# endif
+# ifndef cpu_has_mips32r2
+# define cpu_has_mips32r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2)
+# endif
+# ifndef cpu_has_mips64r1
+# define cpu_has_mips64r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1)
+# endif
+# ifndef cpu_has_mips64r2
+# define cpu_has_mips64r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2)
+# endif
+
+/*
+ * Shortcuts ...
+ */
+#define cpu_has_mips32	(cpu_has_mips32r1 | cpu_has_mips32r2)
+#define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
+#define cpu_has_mips_r1	(cpu_has_mips32r1 | cpu_has_mips64r1)
+#define cpu_has_mips_r2	(cpu_has_mips32r2 | cpu_has_mips64r2)
+
+#ifndef cpu_has_dsp
+#define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
+#endif
+
+#ifndef cpu_has_mipsmt
+#define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+
+#ifndef cpu_has_userlocal
+#define cpu_has_userlocal	(cpu_data[0].options & MIPS_CPU_ULRI)
+#endif
+
+#ifdef CONFIG_32BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex	(cpu_data[0].options & MIPS_CPU_NOFPUEX)
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg	(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		0
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	0
+# endif
+#endif
+
+#ifdef CONFIG_64BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex		0
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits			1
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg		1
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs		1
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses	1
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint		(cpu_data[0].options & MIPS_CPU_VINT)
+#elif !defined(cpu_has_vint)
+# define cpu_has_vint			0
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic		(cpu_data[0].options & MIPS_CPU_VEIC)
+#elif !defined(cpu_has_veic)
+# define cpu_has_veic			0
+#endif
+
+#ifndef cpu_has_inclusive_pcaches
+#define cpu_has_inclusive_pcaches	(cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
+#endif
+
+#ifndef cpu_dcache_line_size
+#define cpu_dcache_line_size()	cpu_data[0].dcache.linesz
+#endif
+#ifndef cpu_icache_line_size
+#define cpu_icache_line_size()	cpu_data[0].icache.linesz
+#endif
+#ifndef cpu_scache_line_size
+#define cpu_scache_line_size()	cpu_data[0].scache.linesz
+#endif
+
+#endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
new file mode 100644
index 0000000..2de73db
--- /dev/null
+++ b/arch/mips/include/asm/cpu-info.h
@@ -0,0 +1,84 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_INFO_H
+#define __ASM_CPU_INFO_H
+
+#include <asm/cache.h>
+
+/*
+ * Descriptor for a cache
+ */
+struct cache_desc {
+	unsigned int waysize;	/* Bytes per way */
+	unsigned short sets;	/* Number of lines per set */
+	unsigned char ways;	/* Number of ways */
+	unsigned char linesz;	/* Size of line in bytes */
+	unsigned char waybit;	/* Bits to select in a cache set */
+	unsigned char flags;	/* Flags describing cache properties */
+};
+
+/*
+ * Flag definitions
+ */
+#define MIPS_CACHE_NOT_PRESENT	0x00000001
+#define MIPS_CACHE_VTAG		0x00000002	/* Virtually tagged cache */
+#define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
+#define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
+#define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
+
+struct cpuinfo_mips {
+	unsigned long		udelay_val;
+	unsigned long		asid_cache;
+
+	/*
+	 * Capability and feature descriptor structure for MIPS CPU
+	 */
+	unsigned long		options;
+	unsigned long		ases;
+	unsigned int		processor_id;
+	unsigned int		fpu_id;
+	unsigned int		cputype;
+	int			isa_level;
+	int			tlbsize;
+	struct cache_desc	icache;	/* Primary I-cache */
+	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
+	struct cache_desc	scache;	/* Secondary cache */
+	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
+	int			srsets;	/* Shadow register sets */
+	int			core;	/* physical core number */
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+	/*
+	 * In the MIPS MT "SMTC" model, each TC is considered
+	 * to be a "CPU" for the purposes of scheduling, but
+	 * exception resources, ASID spaces, etc, are common
+	 * to all TCs within the same VPE.
+	 */
+	int			vpe_id;  /* Virtual Processor number */
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	int			tc_id;   /* Thread Context number */
+#endif
+	void 			*data;	/* Additional data */
+} __attribute__((aligned(SMP_CACHE_BYTES)));
+
+extern struct cpuinfo_mips cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+extern void cpu_probe(void);
+extern void cpu_report(void);
+
+extern const char *__cpu_name[];
+#define cpu_name_string()	__cpu_name[smp_processor_id()]
+
+#endif /* __ASM_CPU_INFO_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
new file mode 100644
index 0000000..229a786
--- /dev/null
+++ b/arch/mips/include/asm/cpu.h
@@ -0,0 +1,267 @@
+/*
+ * cpu.h: Values of the PRId register used to match up
+ *        various MIPS cpu types.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* Assigned Company values for bits 23:16 of the PRId Register
+   (CP0 register 15, select 0).  As of the MIPS32 and MIPS64 specs from
+   MTI, the PRId register is defined in this (backwards compatible)
+   way:
+
+  +----------------+----------------+----------------+----------------+
+  | Company Options| Company ID     | Processor ID   | Revision       |
+  +----------------+----------------+----------------+----------------+
+   31            24 23            16 15             8 7
+
+   I don't have docs for all the previous processors, but my impression is
+   that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
+   spec.
+*/
+
+#define PRID_COMP_LEGACY	0x000000
+#define PRID_COMP_MIPS		0x010000
+#define PRID_COMP_BROADCOM	0x020000
+#define PRID_COMP_ALCHEMY	0x030000
+#define PRID_COMP_SIBYTE	0x040000
+#define PRID_COMP_SANDCRAFT	0x050000
+#define PRID_COMP_NXP   	0x060000
+#define PRID_COMP_TOSHIBA	0x070000
+#define PRID_COMP_LSI		0x080000
+#define PRID_COMP_LEXRA		0x0b0000
+
+
+/*
+ * Assigned values for the product ID register.  In order to detect a
+ * certain CPU type exactly eventually additional registers may need to
+ * be examined.  These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+#define PRID_IMP_R2000		0x0100
+#define PRID_IMP_AU1_REV1	0x0100
+#define PRID_IMP_AU1_REV2	0x0200
+#define PRID_IMP_R3000		0x0200		/* Same as R2000A  */
+#define PRID_IMP_R6000		0x0300		/* Same as R3000A  */
+#define PRID_IMP_R4000		0x0400
+#define PRID_IMP_R6000A		0x0600
+#define PRID_IMP_R10000		0x0900
+#define PRID_IMP_R4300		0x0b00
+#define PRID_IMP_VR41XX		0x0c00
+#define PRID_IMP_R12000		0x0e00
+#define PRID_IMP_R14000		0x0f00
+#define PRID_IMP_R8000		0x1000
+#define PRID_IMP_PR4450		0x1200
+#define PRID_IMP_R4600		0x2000
+#define PRID_IMP_R4700		0x2100
+#define PRID_IMP_TX39		0x2200
+#define PRID_IMP_R4640		0x2200
+#define PRID_IMP_R4650		0x2200		/* Same as R4640 */
+#define PRID_IMP_R5000		0x2300
+#define PRID_IMP_TX49		0x2d00
+#define PRID_IMP_SONIC		0x2400
+#define PRID_IMP_MAGIC		0x2500
+#define PRID_IMP_RM7000		0x2700
+#define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
+#define PRID_IMP_RM9000		0x3400
+#define PRID_IMP_LOONGSON1	0x4200
+#define PRID_IMP_R5432		0x5400
+#define PRID_IMP_R5500		0x5500
+#define PRID_IMP_LOONGSON2	0x6300
+
+#define PRID_IMP_UNKNOWN	0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_MIPS
+ */
+
+#define PRID_IMP_4KC		0x8000
+#define PRID_IMP_5KC		0x8100
+#define PRID_IMP_20KC		0x8200
+#define PRID_IMP_4KEC		0x8400
+#define PRID_IMP_4KSC		0x8600
+#define PRID_IMP_25KF		0x8800
+#define PRID_IMP_5KE		0x8900
+#define PRID_IMP_4KECR2		0x9000
+#define PRID_IMP_4KEMPR2	0x9100
+#define PRID_IMP_4KSD		0x9200
+#define PRID_IMP_24K		0x9300
+#define PRID_IMP_34K		0x9500
+#define PRID_IMP_24KE		0x9600
+#define PRID_IMP_74K		0x9700
+#define PRID_IMP_1004K		0x9900
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
+ */
+
+#define PRID_IMP_SB1            0x0100
+#define PRID_IMP_SB1A           0x1100
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
+ */
+
+#define PRID_IMP_SR71000        0x0400
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
+ */
+
+#define PRID_IMP_BCM4710	0x4000
+#define PRID_IMP_BCM3302	0x9000
+
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
+#define PRID_REV_MASK		0x00ff
+
+#define PRID_REV_TX4927		0x0022
+#define PRID_REV_TX4937		0x0030
+#define PRID_REV_R4400		0x0040
+#define PRID_REV_R3000A		0x0030
+#define PRID_REV_R3000		0x0020
+#define PRID_REV_R2000A		0x0010
+#define PRID_REV_TX3912 	0x0010
+#define PRID_REV_TX3922 	0x0030
+#define PRID_REV_TX3927 	0x0040
+#define PRID_REV_VR4111		0x0050
+#define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
+#define PRID_REV_VR4121		0x0060
+#define PRID_REV_VR4122		0x0070
+#define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
+#define PRID_REV_VR4130		0x0080
+#define PRID_REV_34K_V1_0_2	0x0022
+
+/*
+ * Older processors used to encode processor version and revision in two
+ * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores
+ * have switched to use the 8-bits as 3:3:2 bitfield with the last field as
+ * the patch number.  *ARGH*
+ */
+#define PRID_REV_ENCODE_44(ver, rev)					\
+	((ver) << 4 | (rev))
+#define PRID_REV_ENCODE_332(ver, rev, patch)				\
+	((ver) << 5 | (rev) << 2 | (patch))
+
+/*
+ * FPU implementation/revision register (CP1 control register 0).
+ *
+ * +---------------------------------+----------------+----------------+
+ * | 0                               | Implementation | Revision       |
+ * +---------------------------------+----------------+----------------+
+ *  31                             16 15             8 7              0
+ */
+
+#define FPIR_IMP_NONE		0x0000
+
+enum cpu_type_enum {
+	CPU_UNKNOWN,
+
+	/*
+	 * R2000 class processors
+	 */
+	CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052,
+	CPU_R3081, CPU_R3081E,
+
+	/*
+	 * R6000 class processors
+	 */
+	CPU_R6000, CPU_R6000A,
+
+	/*
+	 * R4000 class processors
+	 */
+	CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310,
+	CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650,
+	CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432,
+	CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121,
+	CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000,
+	CPU_SR71000, CPU_RM9000, CPU_TX49XX,
+
+	/*
+	 * R8000 class processors
+	 */
+	CPU_R8000,
+
+	/*
+	 * TX3900 class processors
+	 */
+	CPU_TX3912, CPU_TX3922, CPU_TX3927,
+
+	/*
+	 * MIPS32 class processors
+	 */
+	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
+	CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
+	CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+
+	/*
+	 * MIPS64 class processors
+	 */
+	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+
+	CPU_LAST
+};
+
+
+/*
+ * ISA Level encodings
+ *
+ */
+#define MIPS_CPU_ISA_I		0x00000001
+#define MIPS_CPU_ISA_II		0x00000002
+#define MIPS_CPU_ISA_III	0x00000004
+#define MIPS_CPU_ISA_IV		0x00000008
+#define MIPS_CPU_ISA_V		0x00000010
+#define MIPS_CPU_ISA_M32R1	0x00000020
+#define MIPS_CPU_ISA_M32R2	0x00000040
+#define MIPS_CPU_ISA_M64R1	0x00000080
+#define MIPS_CPU_ISA_M64R2	0x00000100
+
+#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
+	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
+	MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
+
+/*
+ * CPU Option encodings
+ */
+#define MIPS_CPU_TLB		0x00000001 /* CPU has TLB */
+#define MIPS_CPU_4KEX		0x00000002 /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE	0x00000004 /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE	0x00000008 /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE	0x00000010 /* TX3900-style caches */
+#define MIPS_CPU_FPU		0x00000020 /* CPU has FPU */
+#define MIPS_CPU_32FPR		0x00000040 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER	0x00000080 /* Cycle count/compare */
+#define MIPS_CPU_WATCH		0x00000100 /* watchpoint registers */
+#define MIPS_CPU_DIVEC		0x00000200 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE		0x00000400 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P	0x00000800 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S	0x00001000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK		0x00002000 /* Machine check exception */
+#define MIPS_CPU_EJTAG		0x00004000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX	0x00008000 /* no FPU exception */
+#define MIPS_CPU_LLSC		0x00010000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_INCLUSIVE_CACHES	0x00020000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH	0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT		0x00080000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC		0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */
+#define MIPS_CPU_ULRI		0x00200000 /* CPU has ULRI feature */
+
+/*
+ * CPU ASE encodings
+ */
+#define MIPS_ASE_MIPS16		0x00000001 /* code compression */
+#define MIPS_ASE_MDMX		0x00000002 /* MIPS digital media extension */
+#define MIPS_ASE_MIPS3D		0x00000004 /* MIPS-3D */
+#define MIPS_ASE_SMARTMIPS	0x00000008 /* SmartMIPS */
+#define MIPS_ASE_DSP		0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT		0x00000020 /* CPU supports MIPS MT */
+
+
+#endif /* _ASM_CPU_H */
diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h
new file mode 100644
index 0000000..c00eacb
--- /dev/null
+++ b/arch/mips/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __MIPS_CPUTIME_H
+#define __MIPS_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __MIPS_CPUTIME_H */
diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h
new file mode 100644
index 0000000..559db66
--- /dev/null
+++ b/arch/mips/include/asm/current.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2002 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current		get_current()
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
new file mode 100644
index 0000000..1fd5a2b
--- /dev/null
+++ b/arch/mips/include/asm/debug.h
@@ -0,0 +1,48 @@
+/*
+ * Debug macros for run-time debugging.
+ * Turned on/off with CONFIG_RUNTIME_DEBUG option.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _ASM_DEBUG_H
+#define _ASM_DEBUG_H
+
+
+/*
+ * run-time macros for catching spurious errors.  Eable CONFIG_RUNTIME_DEBUG in
+ * kernel hacking config menu to use them.
+ *
+ * Use them as run-time debugging aid.  NEVER USE THEM AS ERROR HANDLING CODE!!!
+ */
+
+#ifdef CONFIG_RUNTIME_DEBUG
+
+#include <linux/kernel.h>
+
+#define db_assert(x)  if (!(x)) { \
+	panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_warn(x)  if (!(x)) { \
+	printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_verify(x, y) db_assert(x y)
+#define db_verify_warn(x, y) db_warn(x y)
+#define db_run(x)  do { x; } while (0)
+
+#else
+
+#define db_assert(x)
+#define db_warn(x)
+#define db_verify(x, y) x
+#define db_verify_warn(x, y) x
+#define db_run(x)
+
+#endif
+
+#endif /* _ASM_DEBUG_H */
diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h
new file mode 100644
index 0000000..707ffdb
--- /dev/null
+++ b/arch/mips/include/asm/dec/ecc.h
@@ -0,0 +1,55 @@
+/*
+ *	include/asm-mips/dec/ecc.h
+ *
+ *	ECC handling logic definitions common to DECstation/DECsystem
+ *	5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and
+ *	DECsystem 5900 (KN03), 5900/260 (KN05) systems.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_ECC_H
+#define __ASM_MIPS_DEC_ECC_H
+
+/*
+ * Error Address Register bits.
+ * The register is r/wc -- any write clears it.
+ */
+#define KN0X_EAR_VALID		(1<<31)		/* error data valid, bus IRQ */
+#define KN0X_EAR_CPU		(1<<30)		/* CPU/DMA transaction */
+#define KN0X_EAR_WRITE		(1<<29)		/* write/read transaction */
+#define KN0X_EAR_ECCERR		(1<<28)		/* ECC/timeout or overrun */
+#define KN0X_EAR_RES_27		(1<<27)		/* unused */
+#define KN0X_EAR_ADDRESS	(0x7ffffff<<0)	/* address involved */
+
+/*
+ * Error Syndrome Register bits.
+ * The register is frozen when EAR.VALID is set, otherwise it records bits
+ * from the last memory read.  The register is r/wc -- any write clears it.
+ */
+#define KN0X_ESR_VLDHI		(1<<31)		/* error data valid hi word */
+#define KN0X_ESR_CHKHI		(0x7f<<24)	/* check bits read from mem */
+#define KN0X_ESR_SNGHI		(1<<23)		/* single/double bit error */
+#define KN0X_ESR_SYNHI		(0x7f<<16)	/* syndrome from ECC logic */
+#define KN0X_ESR_VLDLO		(1<<15)		/* error data valid lo word */
+#define KN0X_ESR_CHKLO		(0x7f<<8)	/* check bits read from mem */
+#define KN0X_ESR_SNGLO		(1<<7)		/* single/double bit error */
+#define KN0X_ESR_SYNLO		(0x7f<<0)	/* syndrome from ECC logic */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_ecc_be_init(void);
+extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h
new file mode 100644
index 0000000..e10d341
--- /dev/null
+++ b/arch/mips/include/asm/dec/interrupts.h
@@ -0,0 +1,126 @@
+/*
+ * Miscellaneous definitions used to initialise the interrupt vector table
+ * with the machine-specific interrupt routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 by Paul M. Antoine.
+ * reworked 1998 by Harald Koerfgen.
+ * Copyright (C) 2001, 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_INTERRUPTS_H
+#define __ASM_DEC_INTERRUPTS_H
+
+#include <irq.h>
+#include <asm/mipsregs.h>
+
+
+/*
+ * The list of possible system devices which provide an
+ * interrupt.  Not all devices exist on a given system.
+ */
+#define DEC_IRQ_CASCADE		0	/* cascade from CSR or I/O ASIC */
+
+/* Ordinary interrupts */
+#define DEC_IRQ_AB_RECV		1	/* ACCESS.bus receive */
+#define DEC_IRQ_AB_XMIT		2	/* ACCESS.bus transmit */
+#define DEC_IRQ_DZ11		3	/* DZ11 (DC7085) serial */
+#define DEC_IRQ_ASC		4	/* ASC (NCR53C94) SCSI */
+#define DEC_IRQ_FLOPPY		5	/* 82077 FDC */
+#define DEC_IRQ_FPU		6	/* R3k FPU */
+#define DEC_IRQ_HALT		7	/* HALT button or from ACCESS.Bus */
+#define DEC_IRQ_ISDN		8	/* Am79C30A ISDN */
+#define DEC_IRQ_LANCE		9	/* LANCE (Am7990) Ethernet */
+#define DEC_IRQ_BUS		10	/* memory, I/O bus read/write errors */
+#define DEC_IRQ_PSU		11	/* power supply unit warning */
+#define DEC_IRQ_RTC		12	/* DS1287 RTC */
+#define DEC_IRQ_SCC0		13	/* SCC (Z85C30) serial #0 */
+#define DEC_IRQ_SCC1		14	/* SCC (Z85C30) serial #1 */
+#define DEC_IRQ_SII		15	/* SII (DC7061) SCSI */
+#define DEC_IRQ_TC0		16	/* TURBOchannel slot #0 */
+#define DEC_IRQ_TC1		17	/* TURBOchannel slot #1 */
+#define DEC_IRQ_TC2		18	/* TURBOchannel slot #2 */
+#define DEC_IRQ_TIMER		19	/* ARC periodic timer */
+#define DEC_IRQ_VIDEO		20	/* framebuffer */
+
+/* I/O ASIC DMA interrupts */
+#define DEC_IRQ_ASC_MERR	21	/* ASC memory read error */
+#define DEC_IRQ_ASC_ERR		22	/* ASC page overrun */
+#define DEC_IRQ_ASC_DMA		23	/* ASC buffer pointer loaded */
+#define DEC_IRQ_FLOPPY_ERR	24	/* FDC error */
+#define DEC_IRQ_ISDN_ERR	25	/* ISDN memory read/overrun error */
+#define DEC_IRQ_ISDN_RXDMA	26	/* ISDN recv buffer pointer loaded */
+#define DEC_IRQ_ISDN_TXDMA	27	/* ISDN xmit buffer pointer loaded */
+#define DEC_IRQ_LANCE_MERR	28	/* LANCE memory read error */
+#define DEC_IRQ_SCC0A_RXERR	29	/* SCC0A (printer) receive overrun */
+#define DEC_IRQ_SCC0A_RXDMA	30	/* SCC0A receive half page */
+#define DEC_IRQ_SCC0A_TXERR	31	/* SCC0A xmit memory read/overrun */
+#define DEC_IRQ_SCC0A_TXDMA	32	/* SCC0A transmit page end */
+#define DEC_IRQ_AB_RXERR	33	/* ACCESS.bus receive overrun */
+#define DEC_IRQ_AB_RXDMA	34	/* ACCESS.bus receive half page */
+#define DEC_IRQ_AB_TXERR	35	/* ACCESS.bus xmit memory read/ovrn */
+#define DEC_IRQ_AB_TXDMA	36	/* ACCESS.bus transmit page end */
+#define DEC_IRQ_SCC1A_RXERR	37	/* SCC1A (modem) receive overrun */
+#define DEC_IRQ_SCC1A_RXDMA	38	/* SCC1A receive half page */
+#define DEC_IRQ_SCC1A_TXERR	39	/* SCC1A xmit memory read/overrun */
+#define DEC_IRQ_SCC1A_TXDMA	40	/* SCC1A transmit page end */
+
+/* TC5 & TC6 are virtual slots for KN02's onboard devices */
+#define DEC_IRQ_TC5		DEC_IRQ_ASC	/* virtual PMAZ-AA */
+#define DEC_IRQ_TC6		DEC_IRQ_LANCE	/* virtual PMAD-AA */
+
+#define DEC_NR_INTS		41
+
+
+/* Largest of cpu mask_nr tables. */
+#define DEC_MAX_CPU_INTS	6
+/* Largest of asic mask_nr tables. */
+#define DEC_MAX_ASIC_INTS	9
+
+
+/*
+ * CPU interrupt bits common to all systems.
+ */
+#define DEC_CPU_INR_FPU		7	/* R3k FPU */
+#define DEC_CPU_INR_SW1		1	/* software #1 */
+#define DEC_CPU_INR_SW0		0	/* software #0 */
+
+#define DEC_CPU_IRQ_BASE	MIPS_CPU_IRQ_BASE	/* first IRQ assigned to CPU */
+
+#define DEC_CPU_IRQ_NR(n)	((n) + DEC_CPU_IRQ_BASE)
+#define DEC_CPU_IRQ_MASK(n)	(1 << ((n) + CAUSEB_IP))
+#define DEC_CPU_IRQ_ALL		(0xff << CAUSEB_IP)
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Interrupt table structures to hide differences between systems.
+ */
+typedef union { int i; void *p; } int_ptr;
+extern int dec_interrupt[DEC_NR_INTS];
+extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2];
+extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2];
+extern int cpu_fpu_mask;
+
+
+/*
+ * Common interrupt routine prototypes for all DECStations
+ */
+extern void kn02_io_int(void);
+extern void kn02xa_io_int(void);
+extern void kn03_io_int(void);
+extern void asic_dma_int(void);
+extern void asic_all_int(void);
+extern void kn02_all_int(void);
+extern void cpu_all_int(void);
+
+extern void dec_intr_unimplemented(void);
+extern void asic_intr_unimplemented(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
new file mode 100644
index 0000000..98badd6
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -0,0 +1,38 @@
+/*
+ *	include/asm-mips/dec/ioasic.h
+ *
+ *	DEC I/O ASIC access operations.
+ *
+ *	Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_DEC_IOASIC_H
+#define __ASM_DEC_IOASIC_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+extern spinlock_t ioasic_ssr_lock;
+
+extern volatile u32 *ioasic_base;
+
+static inline void ioasic_write(unsigned int reg, u32 v)
+{
+	ioasic_base[reg / 4] = v;
+}
+
+static inline u32 ioasic_read(unsigned int reg)
+{
+	return ioasic_base[reg / 4];
+}
+
+extern void init_ioasic_irqs(int base);
+
+extern void dec_ioasic_clocksource_init(void);
+
+#endif /* __ASM_DEC_IOASIC_H */
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
new file mode 100644
index 0000000..4cbc1f8
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -0,0 +1,152 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the address map in the JUNKIO Asic
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H
+#define __ASM_MIPS_DEC_IOASIC_ADDRS_H
+
+#define IOASIC_SLOT_SIZE 0x00040000
+
+/*
+ * Address ranges decoded by the I/O ASIC for onboard devices.
+ */
+#define IOASIC_SYS_ROM	(0*IOASIC_SLOT_SIZE)	/* system board ROM */
+#define IOASIC_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define IOASIC_ESAR 	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define IOASIC_LANCE 	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define IOASIC_SCC0 	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
+#define IOASIC_VDAC_HI	(5*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_SCC1 	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
+#define IOASIC_VDAC_LO	(7*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
+#define IOASIC_TOY 	(8*IOASIC_SLOT_SIZE)	/* RTC */
+#define IOASIC_ISDN 	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
+#define IOASIC_ERRADDR	(9*IOASIC_SLOT_SIZE)	/* bus error address (3max+) */
+#define IOASIC_CHKSYN 	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
+#define IOASIC_ACC_BUS	(10*IOASIC_SLOT_SIZE)	/* ACCESS.bus (maxine) */
+#define IOASIC_MCR 	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
+#define IOASIC_FLOPPY 	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
+#define IOASIC_SCSI 	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
+#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
+
+
+/*
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
+ */
+					/* all systems */
+#define IO_REG_SCSI_DMA_P	0x00	/* SCSI DMA Pointer */
+#define IO_REG_SCSI_DMA_BP	0x10	/* SCSI DMA Buffer Pointer */
+#define IO_REG_LANCE_DMA_P	0x20	/* LANCE DMA Pointer */
+#define IO_REG_SCC0A_T_DMA_P	0x30	/* SCC0A Transmit DMA Pointer */
+#define IO_REG_SCC0A_R_DMA_P	0x40	/* SCC0A Receive DMA Pointer */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_T_DMA_P	0x50	/* SCC1A Transmit DMA Pointer */
+#define IO_REG_SCC1A_R_DMA_P	0x60	/* SCC1A Receive DMA Pointer */
+
+					/* Maxine */
+#define IO_REG_AB_T_DMA_P	0x50	/* ACCESS.bus Transmit DMA Pointer */
+#define IO_REG_AB_R_DMA_P	0x60	/* ACCESS.bus Receive DMA Pointer */
+#define IO_REG_FLOPPY_DMA_P	0x70	/* Floppy DMA Pointer */
+#define IO_REG_ISDN_T_DMA_P	0x80	/* ISDN Transmit DMA Pointer */
+#define IO_REG_ISDN_T_DMA_BP	0x90	/* ISDN Transmit DMA Buffer Pointer */
+#define IO_REG_ISDN_R_DMA_P	0xa0	/* ISDN Receive DMA Pointer */
+#define IO_REG_ISDN_R_DMA_BP	0xb0	/* ISDN Receive DMA Buffer Pointer */
+
+					/* all systems */
+#define IO_REG_DATA_0		0xc0	/* System Data Buffer 0 */
+#define IO_REG_DATA_1		0xd0	/* System Data Buffer 1 */
+#define IO_REG_DATA_2		0xe0	/* System Data Buffer 2 */
+#define IO_REG_DATA_3		0xf0	/* System Data Buffer 3 */
+
+					/* all systems */
+#define IO_REG_SSR		0x100	/* System Support Register */
+#define IO_REG_SIR		0x110	/* System Interrupt Register */
+#define IO_REG_SIMR		0x120	/* System Interrupt Mask Reg. */
+#define IO_REG_SAR		0x130	/* System Address Register */
+
+					/* Maxine */
+#define IO_REG_ISDN_T_DATA	0x140	/* ISDN Xmit Data Register */
+#define IO_REG_ISDN_R_DATA	0x150	/* ISDN Receive Data Register */
+
+					/* all systems */
+#define IO_REG_LANCE_SLOT	0x160	/* LANCE I/O Slot Register */
+#define IO_REG_SCSI_SLOT	0x170	/* SCSI Slot Register */
+#define IO_REG_SCC0A_SLOT	0x180	/* SCC0A DMA Slot Register */
+
+					/* except Maxine */
+#define IO_REG_SCC1A_SLOT	0x190	/* SCC1A DMA Slot Register */
+
+					/* Maxine */
+#define IO_REG_AB_SLOT		0x190	/* ACCESS.bus DMA Slot Register */
+#define IO_REG_FLOPPY_SLOT	0x1a0	/* Floppy Slot Register */
+
+					/* all systems */
+#define IO_REG_SCSI_SCR		0x1b0	/* SCSI Partial-Word DMA Control */
+#define IO_REG_SCSI_SDR0	0x1c0	/* SCSI DMA Partial Word 0 */
+#define IO_REG_SCSI_SDR1	0x1d0	/* SCSI DMA Partial Word 1 */
+#define IO_REG_FCTR		0x1e0	/* Free-Running Counter */
+#define IO_REG_RES_31		0x1f0	/* unused */
+
+
+/*
+ * The upper 16 bits of the System Support Register are a part of the
+ * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC
+ * machines.  The exception is the Maxine, which makes use of the
+ * FLOPPY and ISDN bits (otherwise unused) and has a different SCC
+ * wiring.
+ */
+						/* all systems */
+#define IO_SSR_SCC0A_TX_DMA_EN	(1<<31)		/* SCC0A transmit DMA enable */
+#define IO_SSR_SCC0A_RX_DMA_EN	(1<<30)		/* SCC0A receive DMA enable */
+#define IO_SSR_RES_27		(1<<27)		/* unused */
+#define IO_SSR_RES_26		(1<<26)		/* unused */
+#define IO_SSR_RES_25		(1<<25)		/* unused */
+#define IO_SSR_RES_24		(1<<24)		/* unused */
+#define IO_SSR_RES_23		(1<<23)		/* unused */
+#define IO_SSR_SCSI_DMA_DIR	(1<<18)		/* SCSI DMA direction */
+#define IO_SSR_SCSI_DMA_EN	(1<<17)		/* SCSI DMA enable */
+#define IO_SSR_LANCE_DMA_EN	(1<<16)		/* LANCE DMA enable */
+
+						/* except Maxine */
+#define IO_SSR_SCC1A_TX_DMA_EN	(1<<29)		/* SCC1A transmit DMA enable */
+#define IO_SSR_SCC1A_RX_DMA_EN	(1<<28)		/* SCC1A receive DMA enable */
+#define IO_SSR_RES_22		(1<<22)		/* unused */
+#define IO_SSR_RES_21		(1<<21)		/* unused */
+#define IO_SSR_RES_20		(1<<20)		/* unused */
+#define IO_SSR_RES_19		(1<<19)		/* unused */
+
+						/* Maxine */
+#define IO_SSR_AB_TX_DMA_EN	(1<<29)		/* ACCESS.bus xmit DMA enable */
+#define IO_SSR_AB_RX_DMA_EN	(1<<28)		/* ACCESS.bus recv DMA enable */
+#define IO_SSR_FLOPPY_DMA_DIR	(1<<22)		/* Floppy DMA direction */
+#define IO_SSR_FLOPPY_DMA_EN	(1<<21)		/* Floppy DMA enable */
+#define IO_SSR_ISDN_TX_DMA_EN	(1<<20)		/* ISDN transmit DMA enable */
+#define IO_SSR_ISDN_RX_DMA_EN	(1<<19)		/* ISDN receive DMA enable */
+
+/*
+ * The lower 16 bits are system-specific.  Bits 15,11:8 are common and
+ * defined here.  The rest is defined in system-specific headers.
+ */
+#define KN0X_IO_SSR_DIAGDN	(1<<15)		/* diagnostic jumper */
+#define KN0X_IO_SSR_SCC_RST	(1<<11)		/* ~SCC0,1 (Z85C30) reset */
+#define KN0X_IO_SSR_RTC_RST	(1<<10)		/* ~RTC (DS1287) reset */
+#define KN0X_IO_SSR_ASC_RST	(1<<9)		/* ~ASC (NCR53C94) reset */
+#define KN0X_IO_SSR_LANCE_RST	(1<<8)		/* ~LANCE (Am7990) reset */
+
+#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */
diff --git a/arch/mips/include/asm/dec/ioasic_ints.h b/arch/mips/include/asm/dec/ioasic_ints.h
new file mode 100644
index 0000000..9aaa986
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_ints.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the interrupt related bits in the I/O ASIC
+ * interrupt status register (and the interrupt mask register, of course)
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x  the Anonymous
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_IOASIC_INTS_H
+#define __ASM_DEC_IOASIC_INTS_H
+
+/*
+ * The upper 16 bits are a part of the I/O ASIC's internal DMA engine
+ * and thus are common to all I/O ASIC machines.  The exception is
+ * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise
+ * unused) and has a different SCC wiring.
+ */
+					/* all systems */
+#define IO_INR_SCC0A_TXDMA	31	/* SCC0A transmit page end */
+#define IO_INR_SCC0A_TXERR	30	/* SCC0A transmit memory read error */
+#define IO_INR_SCC0A_RXDMA	29	/* SCC0A receive half page */
+#define IO_INR_SCC0A_RXERR	28	/* SCC0A receive overrun */
+#define IO_INR_ASC_DMA		19	/* ASC buffer pointer loaded */
+#define IO_INR_ASC_ERR		18	/* ASC page overrun */
+#define IO_INR_ASC_MERR		17	/* ASC memory read error */
+#define IO_INR_LANCE_MERR	16	/* LANCE memory read error */
+
+					/* except Maxine */
+#define IO_INR_SCC1A_TXDMA	27	/* SCC1A transmit page end */
+#define IO_INR_SCC1A_TXERR	26	/* SCC1A transmit memory read error */
+#define IO_INR_SCC1A_RXDMA	25	/* SCC1A receive half page */
+#define IO_INR_SCC1A_RXERR	24	/* SCC1A receive overrun */
+#define IO_INR_RES_23		23	/* unused */
+#define IO_INR_RES_22		22	/* unused */
+#define IO_INR_RES_21		21	/* unused */
+#define IO_INR_RES_20		20	/* unused */
+
+					/* Maxine */
+#define IO_INR_AB_TXDMA		27	/* ACCESS.bus transmit page end */
+#define IO_INR_AB_TXERR		26	/* ACCESS.bus xmit memory read error */
+#define IO_INR_AB_RXDMA		25	/* ACCESS.bus receive half page */
+#define IO_INR_AB_RXERR		24	/* ACCESS.bus receive overrun */
+#define IO_INR_FLOPPY_ERR	23	/* FDC error */
+#define IO_INR_ISDN_TXDMA	22	/* ISDN xmit buffer pointer loaded */
+#define IO_INR_ISDN_RXDMA	21	/* ISDN recv buffer pointer loaded */
+#define IO_INR_ISDN_ERR		20	/* ISDN memory read/overrun error */
+
+#define IO_INR_DMA		16	/* first DMA IRQ */
+
+/*
+ * The lower 16 bits are system-specific and thus defined in
+ * system-specific headers.
+ */
+
+
+#define IO_IRQ_BASE		8	/* first IRQ assigned to I/O ASIC */
+#define IO_IRQ_LINES		32	/* number of I/O ASIC interrupts */
+
+#define IO_IRQ_NR(n)		((n) + IO_IRQ_BASE)
+#define IO_IRQ_MASK(n)		(1 << (n))
+#define IO_IRQ_ALL		0x0000ffff
+#define IO_IRQ_DMA		0xffff0000
+
+#endif /* __ASM_DEC_IOASIC_INTS_H */
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
new file mode 100644
index 0000000..28fa717
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -0,0 +1,90 @@
+/*
+ * Hardware info about DECstation DS2100/3100 systems (otherwise known as
+ * pmin/pmax or KN01).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN01_H
+#define __ASM_MIPS_DEC_KN01_H
+
+#define KN01_SLOT_BASE	0x10000000
+#define KN01_SLOT_SIZE	0x01000000
+
+/*
+ * Address ranges for devices.
+ */
+#define KN01_PMASK	(0*KN01_SLOT_SIZE)	/* color plane mask */
+#define KN01_PCC	(1*KN01_SLOT_SIZE)	/* PCC (DC503) cursor */
+#define KN01_VDAC	(2*KN01_SLOT_SIZE)	/* color map */
+#define KN01_RES_3	(3*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_4	(4*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_5	(5*KN01_SLOT_SIZE)	/* unused */
+#define KN01_RES_6	(6*KN01_SLOT_SIZE)	/* unused */
+#define KN01_ERRADDR	(7*KN01_SLOT_SIZE)	/* write error address */
+#define KN01_LANCE	(8*KN01_SLOT_SIZE)	/* LANCE (Am7990) Ethernet */
+#define KN01_LANCE_MEM	(9*KN01_SLOT_SIZE)	/* LANCE buffer memory */
+#define KN01_SII	(10*KN01_SLOT_SIZE)	/* SII (DC7061) SCSI */
+#define KN01_SII_MEM	(11*KN01_SLOT_SIZE)	/* SII buffer memory */
+#define KN01_DZ11	(12*KN01_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN01_RTC	(13*KN01_SLOT_SIZE)	/* DS1287 RTC (bytes #0) */
+#define KN01_ESAR	(13*KN01_SLOT_SIZE)	/* MAC address (bytes #1) */
+#define KN01_CSR	(14*KN01_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN01_SYS_ROM	(15*KN01_SLOT_SIZE)	/* system board ROM */
+
+
+/*
+ * Frame buffer memory address.
+ */
+#define KN01_VFB_MEM	0x0fc00000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN01_CPU_INR_BUS	6	/* memory, I/O bus read/write errors */
+#define KN01_CPU_INR_VIDEO	6	/* PCC area detect #2 */
+#define KN01_CPU_INR_RTC	5	/* DS1287 RTC */
+#define KN01_CPU_INR_DZ11	4	/* DZ11 (DC7085) serial */
+#define KN01_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN01_CPU_INR_SII	2	/* SII (DC7061) SCSI */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
+#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
+#define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
+#define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
+#define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRG		(1<<1)	/* red DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRB		(1<<0)	/* red DAC voltage over blue (r/o) */
+#define KN01_CSR_LEDS		(0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h
new file mode 100644
index 0000000..93430b5
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02.h
@@ -0,0 +1,91 @@
+/*
+ * Hardware info about DECstation 5000/200 systems (otherwise known as
+ * 3max or KN02).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN02_H
+#define __ASM_MIPS_DEC_KN02_H
+
+#define KN02_SLOT_BASE	0x1fc00000
+#define KN02_SLOT_SIZE	0x00080000
+
+/*
+ * Address ranges decoded by the "system slot" logic for onboard devices.
+ */
+#define KN02_SYS_ROM	(0*KN02_SLOT_SIZE)	/* system board ROM */
+#define KN02_RES_1	(1*KN02_SLOT_SIZE)	/* unused */
+#define KN02_CHKSYN	(2*KN02_SLOT_SIZE)	/* ECC syndrome */
+#define KN02_ERRADDR	(3*KN02_SLOT_SIZE)	/* bus error address */
+#define KN02_DZ11	(4*KN02_SLOT_SIZE)	/* DZ11 (DC7085) serial */
+#define KN02_RTC	(5*KN02_SLOT_SIZE)	/* DS1287 RTC */
+#define KN02_CSR	(6*KN02_SLOT_SIZE)	/* system ctrl & status reg */
+#define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN02_CSR_RES_28		(0xf<<28)	/* unused */
+#define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
+#define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
+#define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
+#define KN02_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
+#define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN02_CSR_LEDIAG		(1<<12)		/* ECC diagn. latch strobe */
+#define KN02_CSR_TXDIS		(1<<11)		/* DZ11 transmit disable */
+#define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
+#define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
+#define KN02_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02_CPU_INR_RES_6	6	/* unused */
+#define KN02_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN02_CPU_INR_RES_4	4	/* unused */
+#define KN02_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02_CPU_INR_CASCADE	2	/* CSR cascade */
+
+/*
+ * CSR interrupt bits.
+ */
+#define KN02_CSR_INR_DZ11	7	/* DZ11 (DC7085) serial */
+#define KN02_CSR_INR_LANCE	6	/* LANCE (Am7990) Ethernet */
+#define KN02_CSR_INR_ASC	5	/* ASC (NCR53C94) SCSI */
+#define KN02_CSR_INR_RES_4	4	/* unused */
+#define KN02_CSR_INR_RES_3	3	/* unused */
+#define KN02_CSR_INR_TC2	2	/* TURBOchannel slot #2 */
+#define KN02_CSR_INR_TC1	1	/* TURBOchannel slot #1 */
+#define KN02_CSR_INR_TC0	0	/* TURBOchannel slot #0 */
+
+
+#define KN02_IRQ_BASE		8	/* first IRQ assigned to CSR */
+#define KN02_IRQ_LINES		8	/* number of CSR interrupts */
+
+#define KN02_IRQ_NR(n)		((n) + KN02_IRQ_BASE)
+#define KN02_IRQ_MASK(n)	(1 << (n))
+#define KN02_IRQ_ALL		0xff
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+extern u32 cached_kn02_csr;
+extern void init_kn02_irqs(int base);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02_H */
diff --git a/arch/mips/include/asm/dec/kn02ba.h b/arch/mips/include/asm/dec/kn02ba.h
new file mode 100644
index 0000000..c957a4f
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ba.h
@@ -0,0 +1,67 @@
+/*
+ *	include/asm-mips/dec/kn02ba.h
+ *
+ *	DECstation 5000/1xx (3min or KN02-BA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02BA_H
+#define __ASM_MIPS_DEC_KN02BA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02BA_CPU_INR_HALT	6	/* HALT button */
+#define KN02BA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02BA_CPU_INR_TC2	4	/* TURBOchannel slot #2 */
+#define KN02BA_CPU_INR_TC1	3	/* TURBOchannel slot #1 */
+#define KN02BA_CPU_INR_TC0	2	/* TURBOchannel slot #0 */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02BA_IO_INR_RES_15	15	/* unused */
+#define KN02BA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02BA_IO_INR_RES_13	13	/* unused */
+#define KN02BA_IO_INR_BUS	12	/* memory, I/O bus read/write errors */
+#define KN02BA_IO_INR_RES_11	11	/* unused */
+#define KN02BA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02BA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02BA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02BA_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN02BA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02BA_IO_INR_RTC	5	/* DS1287 RTC */
+#define KN02BA_IO_INR_PSU	4	/* power supply unit warning */
+#define KN02BA_IO_INR_RES_3	3	/* unused */
+#define KN02BA_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN02BA_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN02BA_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02BA_MER_RES_27	(1<<27)		/* unused */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02BA_MSR_RES_17	(0x3ff<<17)	/* unused */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN02BA_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN02BA_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN02BA_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN02BA_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN02BA_H */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
new file mode 100644
index 0000000..92c0fe2
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -0,0 +1,79 @@
+/*
+ *	include/asm-mips/dec/kn02ca.h
+ *
+ *	Personal DECstation 5000/xx (Maxine or KN02-CA) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02CA_H
+#define __ASM_MIPS_DEC_KN02CA_H
+
+#include <asm/dec/kn02xa.h>		/* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02CA_CPU_INR_HALT	6	/* HALT from ACCESS.Bus */
+#define KN02CA_CPU_INR_CASCADE	5	/* I/O ASIC cascade */
+#define KN02CA_CPU_INR_BUS	4	/* memory, I/O bus read/write errors */
+#define KN02CA_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN02CA_CPU_INR_TIMER	2	/* ARC periodic timer */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN02CA_IO_INR_FLOPPY	15	/* 82077 FDC */
+#define KN02CA_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN02CA_IO_INR_POWERON	13	/* (*) ACCESS.Bus/power-on reset */
+#define KN02CA_IO_INR_TC0	12	/* TURBOchannel slot #0 */
+#define KN02CA_IO_INR_TIMER	12	/* ARC periodic timer (?) */
+#define KN02CA_IO_INR_ISDN	11	/* Am79C30A ISDN */
+#define KN02CA_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN02CA_IO_INR_ASC	9	/* ASC (NCR53C94) SCSI */
+#define KN02CA_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN02CA_IO_INR_HDFLOPPY	7	/* (*) HD (1.44MB) floppy status */
+#define KN02CA_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN02CA_IO_INR_TC1	5	/* TURBOchannel slot #1 */
+#define KN02CA_IO_INR_XDFLOPPY	4	/* (*) XD (2.88MB) floppy status */
+#define KN02CA_IO_INR_VIDEO	3	/* framebuffer */
+#define KN02CA_IO_INR_XVIDEO	2	/* ~framebuffer */
+#define KN02CA_IO_INR_AB_XMIT	1	/* ACCESS.bus transmit */
+#define KN02CA_IO_INR_AB_RECV	0	/* ACCESS.bus receive */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02CA_MER_INTR		(1<<27)		/* ARC IRQ status & ack */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02CA_MSR_INTREN	(1<<26)		/* ARC periodic IRQ enable */
+#define KN02CA_MSR_MS10EN	(1<<25)		/* 10/1ms IRQ period select */
+#define KN02CA_MSR_PFORCE	(0xf<<21)	/* byte lane error force */
+#define KN02CA_MSR_MABEN	(1<<20)		/* A side VFB address enable */
+#define KN02CA_MSR_LASTBANK	(0x7<<17)	/* onboard RAM bank # */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03CA_IO_SSR_RES_14	(1<<14)		/* unused */
+#define KN03CA_IO_SSR_RES_13	(1<<13)		/* unused */
+#define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
+
+#define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
+#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
+#define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
+#define KN03CA_IO_SSR_RES_2	(1<<2)		/* unused */
+#define KN03CA_IO_SSR_RES_1	(1<<1)		/* unused */
+#define KN03CA_IO_SSR_LED	(1<<0)		/* power LED */
+
+#endif /* __ASM_MIPS_DEC_KN02CA_H */
diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h
new file mode 100644
index 0000000..b56b457
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02xa.h
@@ -0,0 +1,84 @@
+/*
+ * Hardware info common to DECstation 5000/1xx systems (otherwise
+ * known as 3min or kn02ba) and Personal DECstations 5000/xx ones
+ * (otherwise known as maxine or kn02ca).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
+ *
+ * These are addresses which have to be known early in the boot process.
+ * For other addresses refer to tc.h, ioasic_addrs.h and friends.
+ */
+#ifndef __ASM_MIPS_DEC_KN02XA_H
+#define __ASM_MIPS_DEC_KN02XA_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN02XA_SLOT_BASE	0x1c000000
+
+/*
+ * Memory control ASIC registers.
+ */
+#define KN02XA_MER		0x0c400000	/* memory error register */
+#define KN02XA_MSR		0x0c800000	/* memory size register */
+
+/*
+ * CPU control ASIC registers.
+ */
+#define KN02XA_MEM_CONF		0x0e000000	/* write timeout config */
+#define KN02XA_EAR		0x0e000004	/* error address register */
+#define KN02XA_BOOT0		0x0e000008	/* boot 0 register */
+#define KN02XA_MEM_INTR		0x0e00000c	/* write err IRQ stat & ack */
+
+/*
+ * Memory Error Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MER_RES_28	(0xf<<28)	/* unused */
+#define KN02XA_MER_RES_17	(0x3ff<<17)	/* unused */
+#define KN02XA_MER_PAGERR	(1<<16)		/* 2k page boundary error */
+#define KN02XA_MER_TRANSERR	(1<<15)		/* transfer length error */
+#define KN02XA_MER_PARDIS	(1<<14)		/* parity error disable */
+#define KN02XA_MER_SIZE		(1<<13)		/* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12	(1<<12)		/* unused */
+#define KN02XA_MER_BYTERR	(0xf<<8)	/* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3	(0x8<<8)	/* byte lane #3 */
+#define KN02XA_MER_BYTERR_2	(0x4<<8)	/* byte lane #2 */
+#define KN02XA_MER_BYTERR_1	(0x2<<8)	/* byte lane #1 */
+#define KN02XA_MER_BYTERR_0	(0x1<<8)	/* byte lane #0 */
+#define KN02XA_MER_RES_0	(0xff<<0)	/* unused */
+
+/*
+ * Memory Size Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MSR_RES_27	(0x1f<<27)	/* unused */
+#define KN02XA_MSR_RES_14	(0x7<<14)	/* unused */
+#define KN02XA_MSR_SIZE		(1<<13)		/* 16M/4M stride */
+#define KN02XA_MSR_RES_0	(0x1fff<<0)	/* unused */
+
+/*
+ * Error Address Register bits.
+ */
+#define KN02XA_EAR_RES_29	(0x7<<29)	/* unused */
+#define KN02XA_EAR_ADDRESS	(0x7ffffff<<2)	/* address involved */
+#define KN02XA_EAR_RES_0	(0x3<<0)	/* unused */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/arch/mips/include/asm/dec/kn03.h b/arch/mips/include/asm/dec/kn03.h
new file mode 100644
index 0000000..edede92
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn03.h
@@ -0,0 +1,74 @@
+/*
+ * Hardware info about DECstation 5000/2x0 systems (otherwise known as
+ * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which
+ * differ mechanically but are otherwise identical (both are known as
+ * KN03).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN03_H
+#define __ASM_MIPS_DEC_KN03_H
+
+#include <asm/dec/ecc.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN03_SLOT_BASE		0x1f800000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN03_CPU_INR_HALT	6	/* HALT button */
+#define KN03_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN03_CPU_INR_RES_4	4	/* unused */
+#define KN03_CPU_INR_RTC	3	/* DS1287 RTC */
+#define KN03_CPU_INR_CASCADE	2	/* I/O ASIC cascade */
+
+/*
+ * I/O ASIC interrupt bits.  Star marks denote non-IRQ status bits.
+ */
+#define KN03_IO_INR_3MAXP	15	/* (*) 3max+/bigmax ID */
+#define KN03_IO_INR_NVRAM	14	/* (*) NVRAM clear jumper */
+#define KN03_IO_INR_TC2		13	/* TURBOchannel slot #2 */
+#define KN03_IO_INR_TC1		12	/* TURBOchannel slot #1 */
+#define KN03_IO_INR_TC0		11	/* TURBOchannel slot #0 */
+#define KN03_IO_INR_NRMOD	10	/* (*) NRMOD manufacturing jumper */
+#define KN03_IO_INR_ASC		9	/* ASC (NCR53C94) SCSI */
+#define KN03_IO_INR_LANCE	8	/* LANCE (Am7990) Ethernet */
+#define KN03_IO_INR_SCC1	7	/* SCC (Z85C30) serial #1 */
+#define KN03_IO_INR_SCC0	6	/* SCC (Z85C30) serial #0 */
+#define KN03_IO_INR_RTC		5	/* DS1287 RTC */
+#define KN03_IO_INR_PSU		4	/* power supply unit warning */
+#define KN03_IO_INR_RES_3	3	/* unused */
+#define KN03_IO_INR_ASC_DATA	2	/* SCSI data ready (for PIO) */
+#define KN03_IO_INR_PBNC	1	/* ~HALT button debouncer */
+#define KN03_IO_INR_PBNO	0	/* HALT button debouncer */
+
+
+/*
+ * Memory Control Register bits.
+ */
+#define KN03_MCR_RES_16		(0xffff<<16)	/* unused */
+#define KN03_MCR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
+#define KN03_MCR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
+#define KN03_MCR_CORRECT	(1<<13)		/* ECC correct/check */
+#define KN03_MCR_RES_11		(0x3<<12)	/* unused */
+#define KN03_MCR_BNK32M		(1<<10)		/* 32M/8M stride */
+#define KN03_MCR_RES_7		(0x7<<7)	/* unused */
+#define KN03_MCR_CHECK		(0x7f<<0)	/* diagnostic check bits */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03_IO_SSR_TXDIS1	(1<<14)		/* SCC1 transmit disable */
+#define KN03_IO_SSR_TXDIS0	(1<<13)		/* SCC0 transmit disable */
+#define KN03_IO_SSR_RES_12	(1<<12)		/* unused */
+
+#define KN03_IO_SSR_LEDS	(0xff<<0)	/* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN03_H */
diff --git a/arch/mips/include/asm/dec/kn05.h b/arch/mips/include/asm/dec/kn05.h
new file mode 100644
index 0000000..56d22dc
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn05.h
@@ -0,0 +1,76 @@
+/*
+ *	include/asm-mips/dec/kn05.h
+ *
+ *	DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ *	or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ *	KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
+ *	definitions.
+ *
+ *	Copyright (C) 2002, 2003, 2005, 2008  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	WARNING!  All this information is pure guesswork based on the
+ *	ROM.  It is provided here in hope it will give someone some
+ *	food for thought.  No documentation for the KN05 nor the KN04
+ *	module has been located so far.
+ */
+#ifndef __ASM_MIPS_DEC_KN05_H
+#define __ASM_MIPS_DEC_KN05_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+/*
+ * The oncard MB (Memory Buffer) ASIC provides an additional address
+ * decoder.  Certain address ranges within the "high" 16 slots are
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally.  "Low" slots are always passed.
+ */
+#define KN4K_SLOT_BASE	0x1fc00000
+
+#define KN4K_MB_ROM	(0*IOASIC_SLOT_SIZE)	/* KN05/KN04 card ROM */
+#define KN4K_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
+#define KN4K_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define KN4K_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define KN4K_MB_INT	(4*IOASIC_SLOT_SIZE)	/* MB interrupt register */
+#define KN4K_MB_EA	(5*IOASIC_SLOT_SIZE)	/* MB error address? */
+#define KN4K_MB_EC	(6*IOASIC_SLOT_SIZE)	/* MB error ??? */
+#define KN4K_MB_CSR	(7*IOASIC_SLOT_SIZE)	/* MB control & status */
+#define KN4K_RES_08	(8*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_09	(9*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_10	(10*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_11	(11*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define KN4K_RES_13	(13*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_14	(14*IOASIC_SLOT_SIZE)	/* unused? */
+#define KN4K_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
+
+/*
+ * Bits for the MB interrupt register.
+ * The register appears read-only.
+ */
+#define KN4K_MB_INT_TC		(1<<0)		/* TURBOchannel? */
+#define KN4K_MB_INT_RTC		(1<<1)		/* RTC? */
+#define KN4K_MB_INT_MT		(1<<3)		/* I/O ASIC cascade */
+
+/*
+ * Bits for the MB control & status register.
+ * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware.
+ */
+#define KN4K_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
+#define KN4K_MB_CSR_F		(1<<1)		/* ??? */
+#define KN4K_MB_CSR_ECC		(0xff<<2)	/* ??? */
+#define KN4K_MB_CSR_OD		(1<<10)		/* ??? */
+#define KN4K_MB_CSR_CP		(1<<11)		/* ??? */
+#define KN4K_MB_CSR_UNC		(1<<12)		/* ??? */
+#define KN4K_MB_CSR_IM		(1<<13)		/* ??? */
+#define KN4K_MB_CSR_NC		(1<<14)		/* ??? */
+#define KN4K_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK		(0x1f<<16)	/* CPU Int[4:0] mask */
+#define KN4K_MB_CSR_FW		(1<<21)		/* ??? */
+#define KN4K_MB_CSR_W		(1<<31)		/* ??? */
+
+#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/arch/mips/include/asm/dec/kn230.h b/arch/mips/include/asm/dec/kn230.h
new file mode 100644
index 0000000..ff1bf17
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn230.h
@@ -0,0 +1,26 @@
+/*
+ *	include/asm-mips/dec/kn230.h
+ *
+ *	DECsystem 5100 (MIPSmate or KN230) definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN230_H
+#define __ASM_MIPS_DEC_KN230_H
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN230_CPU_INR_HALT	6	/* HALT button */
+#define KN230_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
+#define KN230_CPU_INR_RTC	4	/* DS1287 RTC */
+#define KN230_CPU_INR_SII	3	/* SII (DC7061) SCSI */
+#define KN230_CPU_INR_LANCE	3	/* LANCE (Am7990) Ethernet */
+#define KN230_CPU_INR_DZ11	2	/* DZ11 (DC7085) serial */
+
+#endif /* __ASM_MIPS_DEC_KN230_H */
diff --git a/arch/mips/include/asm/dec/machtype.h b/arch/mips/include/asm/dec/machtype.h
new file mode 100644
index 0000000..a6ecdeb
--- /dev/null
+++ b/arch/mips/include/asm/dec/machtype.h
@@ -0,0 +1,27 @@
+/*
+ * Various machine type macros
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998, 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_DEC_MACHTYPE_H
+#define __ASM_DEC_MACHTYPE_H
+
+#include <asm/bootinfo.h>
+
+#define TURBOCHANNEL	(mips_machtype == MACH_DS5000_200 || \
+			 mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#define IOASIC		(mips_machtype == MACH_DS5000_1XX || \
+			 mips_machtype == MACH_DS5000_XX  || \
+			 mips_machtype == MACH_DS5000_2X0 || \
+			 mips_machtype == MACH_DS5900)
+
+#endif
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
new file mode 100644
index 0000000..b9c8203
--- /dev/null
+++ b/arch/mips/include/asm/dec/prom.h
@@ -0,0 +1,174 @@
+/*
+ *	include/asm-mips/dec/prom.h
+ *
+ *	DECstation PROM interface.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on arch/mips/dec/prom/prom.h by the Anonymous.
+ */
+#ifndef _ASM_DEC_PROM_H
+#define _ASM_DEC_PROM_H
+
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+/*
+ * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
+ * Many of these will work for MIPSen as well!
+ */
+#define VEC_RESET		(u64 *)CKSEG1ADDR(0x1fc00000)
+							/* Prom base address */
+
+#define PMAX_PROM_ENTRY(x)	(VEC_RESET + (x))	/* Prom jump table */
+
+#define PMAX_PROM_HALT		PMAX_PROM_ENTRY(2)	/* valid on MIPSen */
+#define PMAX_PROM_AUTOBOOT	PMAX_PROM_ENTRY(5)	/* valid on MIPSen */
+#define PMAX_PROM_OPEN		PMAX_PROM_ENTRY(6)
+#define PMAX_PROM_READ		PMAX_PROM_ENTRY(7)
+#define PMAX_PROM_CLOSE		PMAX_PROM_ENTRY(10)
+#define PMAX_PROM_LSEEK		PMAX_PROM_ENTRY(11)
+#define PMAX_PROM_GETCHAR	PMAX_PROM_ENTRY(12)
+#define PMAX_PROM_PUTCHAR	PMAX_PROM_ENTRY(13)	/* 12 on MIPSen */
+#define PMAX_PROM_GETS		PMAX_PROM_ENTRY(15)
+#define PMAX_PROM_PRINTF	PMAX_PROM_ENTRY(17)
+#define PMAX_PROM_GETENV	PMAX_PROM_ENTRY(33)	/* valid on MIPSen */
+
+
+/*
+ * Magic number indicating REX PROM available on DECstation.  Found in
+ * register a2 on transfer of control to program from PROM.
+ */
+#define REX_PROM_MAGIC		0x30464354
+
+#ifdef CONFIG_64BIT
+
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+
+#else /* !CONFIG_64BIT */
+
+#define prom_is_rex(magic)	((magic) == REX_PROM_MAGIC)
+
+#endif /* !CONFIG_64BIT */
+
+
+/*
+ * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
+ * DS5000/2x0.
+ */
+#define REX_PROM_GETBITMAP	0x84/4	/* get mem bitmap */
+#define REX_PROM_GETCHAR	0x24/4	/* getch() */
+#define REX_PROM_GETENV		0x64/4	/* get env. variable */
+#define REX_PROM_GETSYSID	0x80/4	/* get system id */
+#define REX_PROM_GETTCINFO	0xa4/4
+#define REX_PROM_PRINTF		0x30/4	/* printf() */
+#define REX_PROM_SLOTADDR	0x6c/4	/* slotaddr */
+#define REX_PROM_BOOTINIT	0x54/4	/* open() */
+#define REX_PROM_BOOTREAD	0x58/4	/* read() */
+#define REX_PROM_CLEARCACHE	0x7c/4
+
+
+/*
+ * Used by rex_getbitmap().
+ */
+typedef struct {
+	int pagesize;
+	unsigned char bitmap[0];
+} memmap;
+
+
+/*
+ * Function pointers as read from a PROM's callback vector.
+ */
+extern int (*__rex_bootinit)(void);
+extern int (*__rex_bootread)(void);
+extern int (*__rex_getbitmap)(memmap *);
+extern unsigned long *(*__rex_slot_address)(int);
+extern void *(*__rex_gettcinfo)(void);
+extern int (*__rex_getsysid)(void);
+extern void (*__rex_clear_cache)(void);
+
+extern int (*__prom_getchar)(void);
+extern char *(*__prom_getenv)(char *);
+extern int (*__prom_printf)(char *, ...);
+
+extern int (*__pmax_open)(char*, int);
+extern int (*__pmax_lseek)(int, long, int);
+extern int (*__pmax_read)(int, void *, int);
+extern int (*__pmax_close)(int);
+
+
+#ifdef CONFIG_64BIT
+
+/*
+ * On MIPS64 we have to call PROM functions via a helper
+ * dispatcher to accomodate ABI incompatibilities.
+ */
+#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
+				 __asm__(#fun " = call_o32")
+
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+unsigned long *__DEC_PROM_O32(_rex_slot_address,
+			     (unsigned long *(*)(int), int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
+
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
+
+
+#define rex_bootinit()		_rex_bootinit(__rex_bootinit)
+#define rex_bootread()		_rex_bootread(__rex_bootread)
+#define rex_getbitmap(x)	_rex_getbitmap(__rex_getbitmap, x)
+#define rex_slot_address(x)	_rex_slot_address(__rex_slot_address, x)
+#define rex_gettcinfo()		_rex_gettcinfo(__rex_gettcinfo)
+#define rex_getsysid()		_rex_getsysid(__rex_getsysid)
+#define rex_clear_cache()	_rex_clear_cache(__rex_clear_cache)
+
+#define prom_getchar()		_prom_getchar(__prom_getchar)
+#define prom_getenv(x)		_prom_getenv(__prom_getenv, x)
+#define prom_printf(x...)	_prom_printf(__prom_printf, x)
+
+#else /* !CONFIG_64BIT */
+
+/*
+ * On plain MIPS we just call PROM functions directly.
+ */
+#define rex_bootinit		__rex_bootinit
+#define rex_bootread		__rex_bootread
+#define rex_getbitmap		__rex_getbitmap
+#define rex_slot_address	__rex_slot_address
+#define rex_gettcinfo		__rex_gettcinfo
+#define rex_getsysid		__rex_getsysid
+#define rex_clear_cache		__rex_clear_cache
+
+#define prom_getchar		__prom_getchar
+#define prom_getenv		__prom_getenv
+#define prom_printf		__prom_printf
+
+#define pmax_open		__pmax_open
+#define pmax_lseek		__pmax_lseek
+#define pmax_read		__pmax_read
+#define pmax_close		__pmax_close
+
+#endif /* !CONFIG_64BIT */
+
+
+extern void prom_meminit(u32);
+extern void prom_identify_arch(u32);
+extern void prom_init_cmdline(s32, s32 *, u32);
+
+extern void register_prom_console(void);
+extern void unregister_prom_console(void);
+
+#endif /* _ASM_DEC_PROM_H */
diff --git a/arch/mips/include/asm/dec/system.h b/arch/mips/include/asm/dec/system.h
new file mode 100644
index 0000000..b2afacc
--- /dev/null
+++ b/arch/mips/include/asm/dec/system.h
@@ -0,0 +1,19 @@
+/*
+ *	include/asm-mips/dec/system.h
+ *
+ *	Generic DECstation/DECsystem bits.
+ *
+ *	Copyright (C) 2005, 2006  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+extern int dec_tc_bus;
+
+#endif /* __ASM_DEC_SYSTEM_H */
diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
new file mode 100644
index 0000000..b0bccd2
--- /dev/null
+++ b/arch/mips/include/asm/delay.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+static inline void __delay(unsigned long loops)
+{
+	if (sizeof(long) == 4)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	subu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
+	else if (sizeof(long) == 8 && !DADDI_WAR)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
+	else if (sizeof(long) == 8 && DADDI_WAR)
+		__asm__ __volatile__ (
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, %2					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops), "r" (1));
+}
+
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+static inline void __udelay(unsigned long usecs, unsigned long lpj)
+{
+	unsigned long hi, lo;
+
+	/*
+	 * The rates of 128 is rounded wrongly by the catchall case
+	 * for 64-bit.  Excessive precission?  Probably ...
+	 */
+#if defined(CONFIG_64BIT) && (HZ == 128)
+	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
+#elif defined(CONFIG_64BIT)
+	usecs *= (0x8000000000000000UL / (500000 / HZ));
+#else /* 32-bit junk follows here */
+	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
+	                           0x80000000ULL) >> 32);
+#endif
+
+	if (sizeof(long) == 4)
+		__asm__("multu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+	else if (sizeof(long) == 8 && !R4000_WAR)
+		__asm__("dmultu\t%2, %3"
+		: "=h" (usecs), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+	else if (sizeof(long) == 8 && R4000_WAR)
+		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
+		: "=r" (usecs), "=h" (hi), "=l" (lo)
+		: "r" (usecs), "r" (lpj)
+		: GCC_REG_ACCUM);
+
+	__delay(usecs);
+}
+
+#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
+
+#define udelay(usecs) __udelay((usecs), __udelay_val)
+
+/* make sure "usecs *= ..." in udelay do not overflow. */
+#if HZ >= 1000
+#define MAX_UDELAY_MS	1
+#elif HZ <= 200
+#define MAX_UDELAY_MS	5
+#else
+#define MAX_UDELAY_MS	(1000 / HZ)
+#endif
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
new file mode 100644
index 0000000..d8f9872
--- /dev/null
+++ b/arch/mips/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
new file mode 100644
index 0000000..d1d6991
--- /dev/null
+++ b/arch/mips/include/asm/div64.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2000, 2004  Maciej W. Rozycki
+ * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_DIV64_H
+#define _ASM_DIV64_H
+
+#include <linux/types.h>
+
+#if (_MIPS_SZLONG == 32)
+
+#include <asm/compiler.h>
+
+/*
+ * No traps on overflows for any of these...
+ */
+
+#define do_div64_32(res, high, low, base) ({ \
+	unsigned long __quot32, __mod32; \
+	unsigned long __cf, __tmp, __tmp2, __i; \
+	\
+	__asm__(".set	push\n\t" \
+		".set	noat\n\t" \
+		".set	noreorder\n\t" \
+		"move	%2, $0\n\t" \
+		"move	%3, $0\n\t" \
+		"b	1f\n\t" \
+		" li	%4, 0x21\n" \
+		"0:\n\t" \
+		"sll	$1, %0, 0x1\n\t" \
+		"srl	%3, %0, 0x1f\n\t" \
+		"or	%0, $1, %5\n\t" \
+		"sll	%1, %1, 0x1\n\t" \
+		"sll	%2, %2, 0x1\n" \
+		"1:\n\t" \
+		"bnez	%3, 2f\n\t" \
+		" sltu	%5, %0, %z6\n\t" \
+		"bnez	%5, 3f\n" \
+		"2:\n\t" \
+		" addiu	%4, %4, -1\n\t" \
+		"subu	%0, %0, %z6\n\t" \
+		"addiu	%2, %2, 1\n" \
+		"3:\n\t" \
+		"bnez	%4, 0b\n\t" \
+		" srl	%5, %1, 0x1f\n\t" \
+		".set	pop" \
+		: "=&r" (__mod32), "=&r" (__tmp), \
+		  "=&r" (__quot32), "=&r" (__cf), \
+		  "=&r" (__i), "=&r" (__tmp2) \
+		: "Jr" (base), "0" (high), "1" (low)); \
+	\
+	(res) = __quot32; \
+	__mod32; })
+
+#define do_div(n, base) ({ \
+	unsigned long long __quot; \
+	unsigned long __mod; \
+	unsigned long long __div; \
+	unsigned long __upper, __low, __high, __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__high = __div >> 32; \
+	__low = __div; \
+	__upper = __high; \
+	\
+	if (__high) \
+		__asm__("divu	$0, %z2, %z3" \
+			: "=h" (__upper), "=l" (__high) \
+			: "Jr" (__high), "Jr" (__base) \
+			: GCC_REG_ACCUM); \
+	\
+	__mod = do_div64_32(__low, __upper, __low, __base); \
+	\
+	__quot = __high; \
+	__quot = __quot << 32 | __low; \
+	(n) = __quot; \
+	__mod; })
+
+#endif /* (_MIPS_SZLONG == 32) */
+
+#if (_MIPS_SZLONG == 64)
+
+/*
+ * Hey, we're already 64-bit, no
+ * need to play games..
+ */
+#define do_div(n, base) ({ \
+	unsigned long __quot; \
+	unsigned int __mod; \
+	unsigned long __div; \
+	unsigned int __base; \
+	\
+	__div = (n); \
+	__base = (base); \
+	\
+	__mod = __div % __base; \
+	__quot = __div / __base; \
+	\
+	(n) = __quot; \
+	__mod; })
+
+#endif /* (_MIPS_SZLONG == 64) */
+
+#endif /* _ASM_DIV64_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
new file mode 100644
index 0000000..c64afb4
--- /dev/null
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+#include <asm/cache.h>
+
+void *dma_alloc_noncoherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_noncoherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+	enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+	unsigned long offset, size_t size, enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	int nhwentries, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+	size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+	dma_addr_t dma_handle, unsigned long offset, size_t size,
+	enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+	int nelems, enum dma_data_direction direction);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+extern int dma_supported(struct device *dev, u64 mask);
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if(!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	/* XXX Largest on any MIPS */
+	return 128;
+}
+
+extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction);
+
+#if 0
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+	dma_addr_t device_addr, size_t size, int flags);
+extern void dma_release_declared_memory(struct device *dev);
+extern void * dma_mark_declared_memory_occupied(struct device *dev,
+	dma_addr_t device_addr, size_t size);
+#endif
+
+#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h
new file mode 100644
index 0000000..1353c81
--- /dev/null
+++ b/arch/mips/include/asm/dma.h
@@ -0,0 +1,315 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ *
+ * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
+ * and can only be used for expansion cards. Onboard DMA controllers, such
+ * as the R4030 on Jazz boards behave totally different!
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>			/* need byte IO */
+#include <linux/spinlock.h>		/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/*
+ * The maximum address in KSEG0 that we can perform a DMA transfer to on this
+ * platform.  This describes only the PC style part of the DMA logic like on
+ * Deskstations or Acer PICA but not the much more versatile DMA logic used
+ * for the local devices on Acer PICA or Magnums.
+ */
+#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
+/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */
+#define MAX_DMA_ADDRESS		PAGE_OFFSET
+#else
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + 0x01000000)
+#endif
+#define MAX_DMA_PFN		PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
+#define MAX_DMA32_PFN		(1UL << (32 - PAGE_SHIFT))
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h
new file mode 100644
index 0000000..6983b6f
--- /dev/null
+++ b/arch/mips/include/asm/ds1286.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_DS1286_H
+#define _ASM_DS1286_H
+
+#include <ds1286.h>
+
+#endif /* _ASM_DS1286_H */
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
new file mode 100644
index 0000000..ba1702e
--- /dev/null
+++ b/arch/mips/include/asm/ds1287.h
@@ -0,0 +1,27 @@
+/*
+ *  DS1287 timer functions.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ASM_DS1287_H
+#define __ASM_DS1287_H
+
+extern int ds1287_timer_state(void);
+extern void ds1287_set_base_clock(unsigned int clock);
+extern int ds1287_clockevent_init(int irq);
+
+#endif
diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h
new file mode 100644
index 0000000..e9bfc08
--- /dev/null
+++ b/arch/mips/include/asm/dsp.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2005 Mips Technologies
+ * Author: Chris Dearman, chris@mips.com derived from fpu.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_DSP_H
+#define _ASM_DSP_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+#define DSP_DEFAULT	0x00000000
+#define DSP_MASK	0x3ff
+
+#define __enable_dsp_hazard()						\
+do {									\
+	asm("_ehb");							\
+} while (0)
+
+static inline void __init_dsp(void)
+{
+	mthi1(0);
+	mtlo1(0);
+	mthi2(0);
+	mtlo2(0);
+	mthi3(0);
+	mtlo3(0);
+	wrdsp(DSP_DEFAULT, DSP_MASK);
+}
+
+static inline void init_dsp(void)
+{
+	if (cpu_has_dsp)
+		__init_dsp();
+}
+
+#define __save_dsp(tsk)							\
+do {									\
+	tsk->thread.dsp.dspr[0] = mfhi1();				\
+	tsk->thread.dsp.dspr[1] = mflo1();				\
+	tsk->thread.dsp.dspr[2] = mfhi2();				\
+	tsk->thread.dsp.dspr[3] = mflo2();				\
+	tsk->thread.dsp.dspr[4] = mfhi3();				\
+	tsk->thread.dsp.dspr[5] = mflo3();				\
+	tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK);			\
+} while (0)
+
+#define save_dsp(tsk)							\
+do {									\
+	if (cpu_has_dsp)						\
+		__save_dsp(tsk);					\
+} while (0)
+
+#define __restore_dsp(tsk)						\
+do {									\
+	mthi1(tsk->thread.dsp.dspr[0]);					\
+	mtlo1(tsk->thread.dsp.dspr[1]);					\
+	mthi2(tsk->thread.dsp.dspr[2]);					\
+	mtlo2(tsk->thread.dsp.dspr[3]);					\
+	mthi3(tsk->thread.dsp.dspr[4]);					\
+	mtlo3(tsk->thread.dsp.dspr[5]);					\
+	wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK);			\
+} while (0)
+
+#define restore_dsp(tsk)						\
+do {									\
+	if (cpu_has_dsp)						\
+		__restore_dsp(tsk);					\
+} while (0)
+
+#define __get_dsp_regs(tsk)						\
+({									\
+	if (tsk == current)						\
+		__save_dsp(current);					\
+									\
+	tsk->thread.dsp.dspr;						\
+})
+
+#endif /* _ASM_DSP_H */
diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h
new file mode 100644
index 0000000..4da0c1f
--- /dev/null
+++ b/arch/mips/include/asm/edac.h
@@ -0,0 +1,34 @@
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static inline void atomic_scrub(void *va, u32 size)
+{
+	unsigned long *virt_addr = va;
+	unsigned long temp;
+	u32 i;
+
+	for (i = 0; i < size / sizeof(unsigned long); i++) {
+		/*
+		 * Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 *
+		 * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr));
+		 */
+
+		__asm__ __volatile__ (
+		"	.set	mips2					\n"
+		"1:	ll	%0, %1		# atomic_scrub		\n"
+		"	addu	%0, $0					\n"
+		"	sc	%0, %1					\n"
+		"	beqz	%0, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (temp), "=m" (*virt_addr)
+		: "m" (*virt_addr));
+
+		virt_addr++;
+	}
+}
+
+#endif
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
new file mode 100644
index 0000000..f69f7ac
--- /dev/null
+++ b/arch/mips/include/asm/elf.h
@@ -0,0 +1,371 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+
+/* ELF header e_flags defines. */
+/* MIPS architecture level. */
+#define EF_MIPS_ARCH_1		0x00000000	/* -mips1 code.  */
+#define EF_MIPS_ARCH_2		0x10000000	/* -mips2 code.  */
+#define EF_MIPS_ARCH_3		0x20000000	/* -mips3 code.  */
+#define EF_MIPS_ARCH_4		0x30000000	/* -mips4 code.  */
+#define EF_MIPS_ARCH_5		0x40000000	/* -mips5 code.  */
+#define EF_MIPS_ARCH_32		0x50000000	/* MIPS32 code.  */
+#define EF_MIPS_ARCH_64		0x60000000	/* MIPS64 code.  */
+#define EF_MIPS_ARCH_32R2	0x70000000	/* MIPS32 R2 code.  */
+#define EF_MIPS_ARCH_64R2	0x80000000	/* MIPS64 R2 code.  */
+
+/* The ABI of a file. */
+#define EF_MIPS_ABI_O32		0x00001000	/* O32 ABI.  */
+#define EF_MIPS_ABI_O64		0x00002000	/* O32 extended for 64 bit.  */
+
+#define PT_MIPS_REGINFO		0x70000000
+#define PT_MIPS_RTPROC		0x70000001
+#define PT_MIPS_OPTIONS		0x70000002
+
+/* Flags in the e_flags field of the header */
+#define EF_MIPS_NOREORDER	0x00000001
+#define EF_MIPS_PIC		0x00000002
+#define EF_MIPS_CPIC		0x00000004
+#define EF_MIPS_ABI2		0x00000020
+#define EF_MIPS_OPTIONS_FIRST	0x00000080
+#define EF_MIPS_32BITMODE	0x00000100
+#define EF_MIPS_ABI		0x0000f000
+#define EF_MIPS_ARCH		0xf0000000
+
+#define DT_MIPS_RLD_VERSION	0x70000001
+#define DT_MIPS_TIME_STAMP	0x70000002
+#define DT_MIPS_ICHECKSUM	0x70000003
+#define DT_MIPS_IVERSION	0x70000004
+#define DT_MIPS_FLAGS		0x70000005
+	#define RHF_NONE	0x00000000
+	#define RHF_HARDWAY	0x00000001
+	#define RHF_NOTPOT	0x00000002
+	#define RHF_SGI_ONLY	0x00000010
+#define DT_MIPS_BASE_ADDRESS	0x70000006
+#define DT_MIPS_CONFLICT	0x70000008
+#define DT_MIPS_LIBLIST		0x70000009
+#define DT_MIPS_LOCAL_GOTNO	0x7000000a
+#define DT_MIPS_CONFLICTNO	0x7000000b
+#define DT_MIPS_LIBLISTNO	0x70000010
+#define DT_MIPS_SYMTABNO	0x70000011
+#define DT_MIPS_UNREFEXTNO	0x70000012
+#define DT_MIPS_GOTSYM		0x70000013
+#define DT_MIPS_HIPAGENO	0x70000014
+#define DT_MIPS_RLD_MAP		0x70000016
+
+#define R_MIPS_NONE		0
+#define R_MIPS_16		1
+#define R_MIPS_32		2
+#define R_MIPS_REL32		3
+#define R_MIPS_26		4
+#define R_MIPS_HI16		5
+#define R_MIPS_LO16		6
+#define R_MIPS_GPREL16		7
+#define R_MIPS_LITERAL		8
+#define R_MIPS_GOT16		9
+#define R_MIPS_PC16		10
+#define R_MIPS_CALL16		11
+#define R_MIPS_GPREL32		12
+/* The remaining relocs are defined on Irix, although they are not
+   in the MIPS ELF ABI.  */
+#define R_MIPS_UNUSED1		13
+#define R_MIPS_UNUSED2		14
+#define R_MIPS_UNUSED3		15
+#define R_MIPS_SHIFT5		16
+#define R_MIPS_SHIFT6		17
+#define R_MIPS_64		18
+#define R_MIPS_GOT_DISP		19
+#define R_MIPS_GOT_PAGE		20
+#define R_MIPS_GOT_OFST		21
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_GOTHI16		22
+#define R_MIPS_GOTLO16		23
+#define R_MIPS_SUB		24
+#define R_MIPS_INSERT_A		25
+#define R_MIPS_INSERT_B		26
+#define R_MIPS_DELETE		27
+#define R_MIPS_HIGHER		28
+#define R_MIPS_HIGHEST		29
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_CALLHI16		30
+#define R_MIPS_CALLLO16		31
+/*
+ * This range is reserved for vendor specific relocations.
+ */
+#define R_MIPS_LOVENDOR		100
+#define R_MIPS_HIVENDOR		127
+
+#define SHN_MIPS_ACCOMON	0xff00		/* Allocated common symbols */
+#define SHN_MIPS_TEXT		0xff01		/* Allocated test symbols.  */
+#define SHN_MIPS_DATA		0xff02		/* Allocated data symbols.  */
+#define SHN_MIPS_SCOMMON	0xff03		/* Small common symbols */
+#define SHN_MIPS_SUNDEFINED	0xff04		/* Small undefined symbols */
+
+#define SHT_MIPS_LIST		0x70000000
+#define SHT_MIPS_CONFLICT	0x70000002
+#define SHT_MIPS_GPTAB		0x70000003
+#define SHT_MIPS_UCODE		0x70000004
+#define SHT_MIPS_DEBUG		0x70000005
+#define SHT_MIPS_REGINFO	0x70000006
+#define SHT_MIPS_PACKAGE	0x70000007
+#define SHT_MIPS_PACKSYM	0x70000008
+#define SHT_MIPS_RELD		0x70000009
+#define SHT_MIPS_IFACE		0x7000000b
+#define SHT_MIPS_CONTENT	0x7000000c
+#define SHT_MIPS_OPTIONS	0x7000000d
+#define SHT_MIPS_SHDR		0x70000010
+#define SHT_MIPS_FDESC		0x70000011
+#define SHT_MIPS_EXTSYM		0x70000012
+#define SHT_MIPS_DENSE		0x70000013
+#define SHT_MIPS_PDESC		0x70000014
+#define SHT_MIPS_LOCSYM		0x70000015
+#define SHT_MIPS_AUXSYM		0x70000016
+#define SHT_MIPS_OPTSYM		0x70000017
+#define SHT_MIPS_LOCSTR		0x70000018
+#define SHT_MIPS_LINE		0x70000019
+#define SHT_MIPS_RFDESC		0x7000001a
+#define SHT_MIPS_DELTASYM	0x7000001b
+#define SHT_MIPS_DELTAINST	0x7000001c
+#define SHT_MIPS_DELTACLASS	0x7000001d
+#define SHT_MIPS_DWARF		0x7000001e
+#define SHT_MIPS_DELTADECL	0x7000001f
+#define SHT_MIPS_SYMBOL_LIB	0x70000020
+#define SHT_MIPS_EVENTS		0x70000021
+#define SHT_MIPS_TRANSLATE	0x70000022
+#define SHT_MIPS_PIXIE		0x70000023
+#define SHT_MIPS_XLATE		0x70000024
+#define SHT_MIPS_XLATE_DEBUG	0x70000025
+#define SHT_MIPS_WHIRL		0x70000026
+#define SHT_MIPS_EH_REGION	0x70000027
+#define SHT_MIPS_XLATE_OLD	0x70000028
+#define SHT_MIPS_PDR_EXCEPTION	0x70000029
+
+#define SHF_MIPS_GPREL		0x10000000
+#define SHF_MIPS_MERGE		0x20000000
+#define SHF_MIPS_ADDR		0x40000000
+#define SHF_MIPS_STRING		0x80000000
+#define SHF_MIPS_NOSTRIP	0x08000000
+#define SHF_MIPS_LOCAL		0x04000000
+#define SHF_MIPS_NAMES		0x02000000
+#define SHF_MIPS_NODUPES	0x01000000
+
+#ifndef ELF_ARCH
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef CONFIG_32BIT
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if ((__h->e_flags & EF_MIPS_ABI2) != 0)				\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
+	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS64) 			\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifdef __MIPSEB__
+#define ELF_DATA	ELFDATA2MSB
+#elif __MIPSEL__
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_MIPS
+
+#endif /* !defined(ELF_ARCH) */
+
+struct mips_abi;
+
+extern struct mips_abi mips_abi;
+extern struct mips_abi mips_abi_32;
+extern struct mips_abi mips_abi_n32;
+
+#ifdef CONFIG_32BIT
+
+#define SET_PERSONALITY(ex, ibcs2)					\
+do {									\
+	if (ibcs2)							\
+		set_personality(PER_SVR4);				\
+	set_personality(PER_LINUX);					\
+									\
+	current->thread.abi = &mips_abi;				\
+} while (0)
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifdef CONFIG_MIPS32_N32
+#define __SET_PERSONALITY32_N32()					\
+	do {								\
+		set_thread_flag(TIF_32BIT_ADDR);			\
+		current->thread.abi = &mips_abi_n32;			\
+	} while (0)
+#else
+#define __SET_PERSONALITY32_N32()					\
+	do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+#define __SET_PERSONALITY32_O32()					\
+	do {								\
+		set_thread_flag(TIF_32BIT_REGS);			\
+		set_thread_flag(TIF_32BIT_ADDR);			\
+		current->thread.abi = &mips_abi_32;			\
+	} while (0)
+#else
+#define __SET_PERSONALITY32_O32()					\
+	do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+#define __SET_PERSONALITY32(ex)						\
+do {									\
+	if ((((ex).e_flags & EF_MIPS_ABI2) != 0) &&			\
+	     ((ex).e_flags & EF_MIPS_ABI) == 0)				\
+		__SET_PERSONALITY32_N32();				\
+	else								\
+		__SET_PERSONALITY32_O32();				\
+} while (0)
+#else
+#define __SET_PERSONALITY32(ex)	do { } while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2)					\
+do {									\
+	clear_thread_flag(TIF_32BIT_REGS);				\
+	clear_thread_flag(TIF_32BIT_ADDR);				\
+									\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)			\
+		__SET_PERSONALITY32(ex);				\
+	else								\
+		current->thread.abi = &mips_abi;			\
+									\
+	if (ibcs2)							\
+		set_personality(PER_SVR4);				\
+	else if (current->personality != PER_LINUX32)			\
+		set_personality(PER_LINUX);				\
+} while (0)
+
+#endif /* CONFIG_64BIT */
+
+struct task_struct;
+
+extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs)			\
+	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
+	dump_task_fpu(tsk, elf_fpregs)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+/*
+ * See comments in asm-alpha/elf.h, this is the same thing
+ * on the MIPS.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
+	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
+	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
+	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
+	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
+	_r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0;	\
+	_r->regs[30] = _r->regs[31] = 0;				\
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/mips/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma2rh/emma2rh.h
new file mode 100644
index 0000000..6a1af0a
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/emma2rh.h
@@ -0,0 +1,333 @@
+/*
+ *  include/asm-mips/emma2rh/emma2rh.h
+ *      This file is EMMA2RH common header.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ *          Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_EMMA2RH_EMMA2RH_H
+#define __ASM_EMMA2RH_EMMA2RH_H
+
+#include <irq.h>
+
+/*
+ * EMMA2RH registers
+ */
+#define REGBASE 0x10000000
+
+#define EMMA2RH_BHIF_STRAP_0	(0x000010+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_0	(0x000030+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_1	(0x000034+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_2	(0x000038+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_0	(0x000040+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_1	(0x000044+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_2	(0x000048+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_0	(0x000050+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_1	(0x000054+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_2	(0x000058+REGBASE)
+#define EMMA2RH_BHIF_SW_INT	(0x000070+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_EN	(0x000080+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_CLR	(0x000090+REGBASE)
+#define EMMA2RH_BHIF_MAIN_CTRL	(0x0000b4+REGBASE)
+#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS	(0x0000c0+REGBASE)
+#define EMMA2RH_GPIO_DIR	(0x110d20+REGBASE)
+#define EMMA2RH_GPIO_INT_ST	(0x110d30+REGBASE)
+#define EMMA2RH_GPIO_INT_MASK	(0x110d3c+REGBASE)
+#define EMMA2RH_GPIO_INT_MODE	(0x110d48+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_A	(0x110d54+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_B	(0x110d60+REGBASE)
+#define EMMA2RH_PBRD_INT_EN	(0x100010+REGBASE)
+#define EMMA2RH_PBRD_CLKSEL	(0x100028+REGBASE)
+#define EMMA2RH_PFUR0_BASE	(0x101000+REGBASE)
+#define EMMA2RH_PFUR1_BASE	(0x102000+REGBASE)
+#define EMMA2RH_PFUR2_BASE	(0x103000+REGBASE)
+#define EMMA2RH_PIIC0_BASE	(0x107000+REGBASE)
+#define EMMA2RH_PIIC1_BASE	(0x108000+REGBASE)
+#define EMMA2RH_PIIC2_BASE	(0x109000+REGBASE)
+#define EMMA2RH_PCI_CONTROL	(0x200000+REGBASE)
+#define EMMA2RH_PCI_ARBIT_CTR	(0x200004+REGBASE)
+#define EMMA2RH_PCI_IWIN0_CTR	(0x200010+REGBASE)
+#define EMMA2RH_PCI_IWIN1_CTR	(0x200014+REGBASE)
+#define EMMA2RH_PCI_INIT_ESWP	(0x200018+REGBASE)
+#define EMMA2RH_PCI_INT		(0x200020+REGBASE)
+#define EMMA2RH_PCI_INT_EN	(0x200024+REGBASE)
+#define EMMA2RH_PCI_TWIN_CTR	(0x200030+REGBASE)
+#define EMMA2RH_PCI_TWIN_BADR	(0x200034+REGBASE)
+#define EMMA2RH_PCI_TWIN0_DADR	(0x200038+REGBASE)
+#define EMMA2RH_PCI_TWIN1_DADR	(0x20003c+REGBASE)
+
+/*
+ *  Memory map (physical address)
+ *
+ *  Note most of the following address must be properly aligned by the
+ *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
+ *  PCI_IO_BASE must be aligned along 16MB boundary.
+ */
+
+/* the actual ram size is detected at run-time */
+#define EMMA2RH_RAM_BASE	0x00000000
+#define EMMA2RH_RAM_SIZE	0x10000000	/* less than 256MB */
+
+#define EMMA2RH_IO_BASE		0x10000000
+#define EMMA2RH_IO_SIZE		0x01000000	/* 16 MB */
+
+#define EMMA2RH_GENERALIO_BASE	0x11000000
+#define EMMA2RH_GENERALIO_SIZE	0x01000000	/* 16 MB */
+
+#define EMMA2RH_PCI_IO_BASE	0x12000000
+#define EMMA2RH_PCI_IO_SIZE	0x02000000	/* 32 MB */
+
+#define EMMA2RH_PCI_MEM_BASE	0x14000000
+#define EMMA2RH_PCI_MEM_SIZE	0x08000000	/* 128 MB */
+
+#define EMMA2RH_ROM_BASE	0x1c000000
+#define EMMA2RH_ROM_SIZE	0x04000000	/* 64 MB */
+
+#define EMMA2RH_PCI_CONFIG_BASE	EMMA2RH_PCI_IO_BASE
+#define EMMA2RH_PCI_CONFIG_SIZE	EMMA2RH_PCI_IO_SIZE
+
+#define NUM_CPU_IRQ		8
+#define NUM_EMMA2RH_IRQ		96
+
+#define CPU_EMMA2RH_CASCADE	2
+#define CPU_IRQ_BASE		MIPS_CPU_IRQ_BASE
+#define EMMA2RH_IRQ_BASE	(CPU_IRQ_BASE + NUM_CPU_IRQ)
+
+/*
+ * emma2rh irq defs
+ */
+
+#define EMMA2RH_IRQ_INT0	(0 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT1	(1 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT2	(2 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT3	(3 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT4	(4 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT5	(5 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT6	(6 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT7	(7 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT8	(8 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT9	(9 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT10	(10 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT11	(11 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT12	(12 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT13	(13 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT14	(14 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT15	(15 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT16	(16 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT17	(17 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT18	(18 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT19	(19 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT20	(20 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT21	(21 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT22	(22 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT23	(23 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT24	(24 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT25	(25 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT26	(26 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT27	(27 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT28	(28 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT29	(29 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT30	(30 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT31	(31 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT32	(32 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT33	(33 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT34	(34 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT35	(35 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT36	(36 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT37	(37 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT38	(38 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT39	(39 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT40	(40 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT41	(41 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT42	(42 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT43	(43 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT44	(44 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT45	(45 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT46	(46 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT47	(47 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT48	(48 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT49	(49 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT50	(50 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT51	(51 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT52	(52 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT53	(53 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT54	(54 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT55	(55 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT56	(56 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT57	(57 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT58	(58 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT59	(59 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT60	(60 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT61	(61 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT62	(62 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT63	(63 + EMMA2RH_IRQ_BASE)
+
+#define EMMA2RH_IRQ_PFUR0	EMMA2RH_IRQ_INT49
+#define EMMA2RH_IRQ_PFUR1	EMMA2RH_IRQ_INT50
+#define EMMA2RH_IRQ_PFUR2	EMMA2RH_IRQ_INT51
+#define EMMA2RH_IRQ_PIIC0	EMMA2RH_IRQ_INT56
+#define EMMA2RH_IRQ_PIIC1	EMMA2RH_IRQ_INT57
+#define EMMA2RH_IRQ_PIIC2	EMMA2RH_IRQ_INT58
+
+/*
+ *  EMMA2RH Register Access
+ */
+
+#define EMMA2RH_BASE (0xa0000000)
+
+static inline void emma2rh_sync(void)
+{
+	volatile u32 *p = (volatile u32 *)0xbfc00000;
+	(void)(*p);
+}
+
+static inline void emma2rh_out32(u32 offset, u32 val)
+{
+	*(volatile u32 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u32 emma2rh_in32(u32 offset)
+{
+	u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+static inline void emma2rh_out16(u32 offset, u16 val)
+{
+	*(volatile u16 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u16 emma2rh_in16(u32 offset)
+{
+	u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+static inline void emma2rh_out8(u32 offset, u8 val)
+{
+	*(volatile u8 *)(EMMA2RH_BASE | offset) = val;
+	emma2rh_sync();
+}
+
+static inline u8 emma2rh_in8(u32 offset)
+{
+	u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
+	emma2rh_sync();
+	return val;
+}
+
+/**
+ * IIC registers map
+ **/
+
+/*---------------------------------------------------------------------------*/
+/* CNT - Control register (00H R/W)                                          */
+/*---------------------------------------------------------------------------*/
+#define SPT         0x00000001
+#define STT         0x00000002
+#define ACKE        0x00000004
+#define WTIM        0x00000008
+#define SPIE        0x00000010
+#define WREL        0x00000020
+#define LREL        0x00000040
+#define IICE        0x00000080
+#define CNT_RESERVED    0x000000ff	/* reserved bit 0 */
+
+#define I2C_EMMA_START      (IICE | STT)
+#define I2C_EMMA_STOP       (IICE | SPT)
+#define I2C_EMMA_REPSTART   I2C_EMMA_START
+
+/*---------------------------------------------------------------------------*/
+/* STA - Status register (10H Read)                                          */
+/*---------------------------------------------------------------------------*/
+#define MSTS        0x00000080
+#define ALD         0x00000040
+#define EXC         0x00000020
+#define COI         0x00000010
+#define TRC         0x00000008
+#define ACKD        0x00000004
+#define STD         0x00000002
+#define SPD         0x00000001
+
+/*---------------------------------------------------------------------------*/
+/* CSEL - Clock select register (20H R/W)                                    */
+/*---------------------------------------------------------------------------*/
+#define FCL         0x00000080
+#define ND50        0x00000040
+#define CLD         0x00000020
+#define DAD         0x00000010
+#define SMC         0x00000008
+#define DFC         0x00000004
+#define CL          0x00000003
+#define CSEL_RESERVED   0x000000ff	/* reserved bit 0 */
+
+#define FAST397     0x0000008b
+#define FAST297     0x0000008a
+#define FAST347     0x0000000b
+#define FAST260     0x0000000a
+#define FAST130     0x00000008
+#define STANDARD108 0x00000083
+#define STANDARD83  0x00000082
+#define STANDARD95  0x00000003
+#define STANDARD73  0x00000002
+#define STANDARD36  0x00000001
+#define STANDARD71  0x00000000
+
+/*---------------------------------------------------------------------------*/
+/* SVA - Slave address register (30H R/W)                                    */
+/*---------------------------------------------------------------------------*/
+#define SVA         0x000000fe
+
+/*---------------------------------------------------------------------------*/
+/* SHR - Shift register (40H R/W)                                            */
+/*---------------------------------------------------------------------------*/
+#define SR          0x000000ff
+
+/*---------------------------------------------------------------------------*/
+/* INT - Interrupt register (50H R/W)                                        */
+/* INTM - Interrupt mask register (60H R/W)                                  */
+/*---------------------------------------------------------------------------*/
+#define INTE0       0x00000001
+
+/***********************************************************************
+ * I2C registers
+ ***********************************************************************
+ */
+#define I2C_EMMA_CNT            0x00
+#define I2C_EMMA_STA            0x10
+#define I2C_EMMA_CSEL           0x20
+#define I2C_EMMA_SVA            0x30
+#define I2C_EMMA_SHR            0x40
+#define I2C_EMMA_INT            0x50
+#define I2C_EMMA_INTM           0x60
+
+/*
+ * include the board dependent part
+ */
+#if defined(CONFIG_MARKEINS)
+#include <asm/emma2rh/markeins.h>
+#else
+#error "Unknown EMMA2RH board!"
+#endif
+
+#endif /* __ASM_EMMA2RH_EMMA2RH_H */
diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma2rh/markeins.h
new file mode 100644
index 0000000..973b062
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/markeins.h
@@ -0,0 +1,75 @@
+/*
+ *  include/asm-mips/emma2rh/markeins.h
+ *      This file is EMMA2RH board depended header.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ *          Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef MARKEINS_H
+#define MARKEINS_H
+
+#define NUM_EMMA2RH_IRQ_SW	32
+#define NUM_EMMA2RH_IRQ_GPIO	32
+
+#define EMMA2RH_SW_CASCADE	(EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0)
+#define EMMA2RH_GPIO_CASCADE	(EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0)
+
+#define EMMA2RH_SW_IRQ_BASE	(EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
+#define EMMA2RH_GPIO_IRQ_BASE	(EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
+
+#define EMMA2RH_SW_IRQ_INT0	(0+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT1	(1+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT2	(2+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT3	(3+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT4	(4+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT5	(5+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT6	(6+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT7	(7+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT8	(8+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT9	(9+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT10	(10+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT11	(11+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT12	(12+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT13	(13+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT14	(14+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT15	(15+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT16	(16+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT17	(17+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT18	(18+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT19	(19+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT20	(20+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT21	(21+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT22	(22+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT23	(23+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT24	(24+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT25	(25+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT26	(26+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT27	(27+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT28	(28+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT29	(29+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT30	(30+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT31	(31+EMMA2RH_SW_IRQ_BASE)
+
+#define MARKEINS_PCI_IRQ_INTA	EMMA2RH_GPIO_IRQ_BASE+15
+#define MARKEINS_PCI_IRQ_INTB	EMMA2RH_GPIO_IRQ_BASE+16
+#define MARKEINS_PCI_IRQ_INTC	EMMA2RH_GPIO_IRQ_BASE+17
+#define MARKEINS_PCI_IRQ_INTD	EMMA2RH_GPIO_IRQ_BASE+18
+
+#endif /* CONFIG_MARKEINS */
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
new file mode 100644
index 0000000..3c0d840
--- /dev/null
+++ b/arch/mips/include/asm/errno.h
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+
+#include <asm-generic/errno-base.h>
+
+#define	ENOMSG		35	/* No message of desired type */
+#define	EIDRM		36	/* Identifier removed */
+#define	ECHRNG		37	/* Channel number out of range */
+#define	EL2NSYNC	38	/* Level 2 not synchronized */
+#define	EL3HLT		39	/* Level 3 halted */
+#define	EL3RST		40	/* Level 3 reset */
+#define	ELNRNG		41	/* Link number out of range */
+#define	EUNATCH		42	/* Protocol driver not attached */
+#define	ENOCSI		43	/* No CSI structure available */
+#define	EL2HLT		44	/* Level 2 halted */
+#define	EDEADLK		45	/* Resource deadlock would occur */
+#define	ENOLCK		46	/* No record locks available */
+#define	EBADE		50	/* Invalid exchange */
+#define	EBADR		51	/* Invalid request descriptor */
+#define	EXFULL		52	/* Exchange full */
+#define	ENOANO		53	/* No anode */
+#define	EBADRQC		54	/* Invalid request code */
+#define	EBADSLT		55	/* Invalid slot */
+#define	EDEADLOCK	56	/* File locking deadlock error */
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EMULTIHOP	74	/* Multihop attempted */
+#define	EBADMSG		77	/* Not a data message */
+#define	ENAMETOOLONG	78	/* File name too long */
+#define	EOVERFLOW	79	/* Value too large for defined data type */
+#define	ENOTUNIQ	80	/* Name not unique on network */
+#define	EBADFD		81	/* File descriptor in bad state */
+#define	EREMCHG		82	/* Remote address changed */
+#define	ELIBACC		83	/* Can not access a needed shared library */
+#define	ELIBBAD		84	/* Accessing a corrupted shared library */
+#define	ELIBSCN		85	/* .lib section in a.out corrupted */
+#define	ELIBMAX		86	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	87	/* Cannot exec a shared library directly */
+#define	EILSEQ		88	/* Illegal byte sequence */
+#define	ENOSYS		89	/* Function not implemented */
+#define	ELOOP		90	/* Too many symbolic links encountered */
+#define	ERESTART	91	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	92	/* Streams pipe error */
+#define	ENOTEMPTY	93	/* Directory not empty */
+#define	EUSERS		94	/* Too many users */
+#define	ENOTSOCK	95	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	96	/* Destination address required */
+#define	EMSGSIZE	97	/* Message too long */
+#define	EPROTOTYPE	98	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	99	/* Protocol not available */
+#define	EPROTONOSUPPORT	120	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	121	/* Socket type not supported */
+#define	EOPNOTSUPP	122	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	123	/* Protocol family not supported */
+#define	EAFNOSUPPORT	124	/* Address family not supported by protocol */
+#define	EADDRINUSE	125	/* Address already in use */
+#define	EADDRNOTAVAIL	126	/* Cannot assign requested address */
+#define	ENETDOWN	127	/* Network is down */
+#define	ENETUNREACH	128	/* Network is unreachable */
+#define	ENETRESET	129	/* Network dropped connection because of reset */
+#define	ECONNABORTED	130	/* Software caused connection abort */
+#define	ECONNRESET	131	/* Connection reset by peer */
+#define	ENOBUFS		132	/* No buffer space available */
+#define	EISCONN		133	/* Transport endpoint is already connected */
+#define	ENOTCONN	134	/* Transport endpoint is not connected */
+#define	EUCLEAN		135	/* Structure needs cleaning */
+#define	ENOTNAM		137	/* Not a XENIX named type file */
+#define	ENAVAIL		138	/* No XENIX semaphores available */
+#define	EISNAM		139	/* Is a named type file */
+#define	EREMOTEIO	140	/* Remote I/O error */
+#define EINIT		141	/* Reserved */
+#define EREMDEV		142	/* Error 142 */
+#define	ESHUTDOWN	143	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	144	/* Too many references: cannot splice */
+#define	ETIMEDOUT	145	/* Connection timed out */
+#define	ECONNREFUSED	146	/* Connection refused */
+#define	EHOSTDOWN	147	/* Host is down */
+#define	EHOSTUNREACH	148	/* No route to host */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EALREADY	149	/* Operation already in progress */
+#define	EINPROGRESS	150	/* Operation now in progress */
+#define	ESTALE		151	/* Stale NFS file handle */
+#define ECANCELED	158	/* AIO operation canceled */
+
+/*
+ * These error are Linux extensions.
+ */
+#define ENOMEDIUM	159	/* No medium found */
+#define EMEDIUMTYPE	160	/* Wrong medium type */
+#define	ENOKEY		161	/* Required key not available */
+#define	EKEYEXPIRED	162	/* Key has expired */
+#define	EKEYREVOKED	163	/* Key has been revoked */
+#define	EKEYREJECTED	164	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	165	/* Owner died */
+#define	ENOTRECOVERABLE	166	/* State not recoverable */
+
+#define EDQUOT		1133	/* Quota exceeded */
+
+#ifdef __KERNEL__
+
+/* The biggest error number defined here or in <linux/errno.h>. */
+#define EMAXERRNO	1133
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ERRNO_H */
diff --git a/arch/mips/include/asm/fb.h b/arch/mips/include/asm/fb.h
new file mode 100644
index 0000000..bd3f68c
--- /dev/null
+++ b/arch/mips/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h
new file mode 100644
index 0000000..2a52333
--- /dev/null
+++ b/arch/mips/include/asm/fcntl.h
@@ -0,0 +1,61 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
+ */
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+
+#define O_APPEND	0x0008
+#define O_SYNC		0x0010
+#define O_NONBLOCK	0x0080
+#define O_CREAT         0x0100	/* not fcntl */
+#define O_TRUNC		0x0200	/* not fcntl */
+#define O_EXCL		0x0400	/* not fcntl */
+#define O_NOCTTY	0x0800	/* not fcntl */
+#define FASYNC		0x1000	/* fcntl, for BSD compatibility */
+#define O_LARGEFILE	0x2000	/* allow large file opens */
+#define O_DIRECT	0x8000	/* direct disk access hint */
+
+#define F_GETLK		14
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	24	/*  for sockets. */
+#define F_GETOWN	23	/*  for sockets. */
+
+#ifndef __mips64
+#define F_GETLK64	33	/*  using 'struct flock64' */
+#define F_SETLK64	34
+#define F_SETLKW64	35
+#endif
+
+/*
+ * The flavours of struct flock.  "struct flock" is the ABI compliant
+ * variant.  Finally struct flock64 is the LFS variant of struct flock.  As
+ * a historic accident and inconsistence with the ABI definition it doesn't
+ * contain all the same fields as struct flock.
+ */
+
+#ifdef CONFIG_32BIT
+
+struct flock {
+	short	l_type;
+	short	l_whence;
+	off_t	l_start;
+	off_t	l_len;
+	long	l_sysid;
+	__kernel_pid_t l_pid;
+	long	pad[4];
+};
+
+#define HAVE_ARCH_STRUCT_FLOCK
+
+#endif /* CONFIG_32BIT */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
new file mode 100644
index 0000000..9cc8522
--- /dev/null
+++ b/arch/mips/include/asm/fixmap.h
@@ -0,0 +1,118 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 8
+	FIX_CMAP_BEGIN,
+#ifdef CONFIG_MIPS_MT_SMTC
+	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS),
+#else
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+#endif
+#ifdef CONFIG_HIGHMEM
+	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_BEGIN = FIX_CMAP_END + 1,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+#define FIXADDR_TOP	((unsigned long)(long)(int)(0xff000000 - 0x20000))
+#else
+#define FIXADDR_TOP	((unsigned long)(long)(int)0xfffe0000)
+#endif
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+/*
+ * Called from pgtable_init()
+ */
+extern void fixrange_init(unsigned long start, unsigned long end,
+        pgd_t *pgd_base);
+
+
+#endif
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
new file mode 100644
index 0000000..992d232
--- /dev/null
+++ b/arch/mips/include/asm/floppy.h
@@ -0,0 +1,56 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 2000 Ralf Baechle
+ */
+#ifndef _ASM_FLOPPY_H
+#define _ASM_FLOPPY_H
+
+#include <linux/dma-mapping.h>
+
+static inline void fd_cacheflush(char * addr, long size)
+{
+	dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL);
+}
+
+#define MAX_BUFFER_SECTORS 24
+
+
+/*
+ * And on Mips's the CMOS info fails also ...
+ *
+ * FIXME: This information should come from the ARC configuration tree
+ *        or whereever a particular machine has stored this ...
+ */
+#define FLOPPY0_TYPE 		fd_drive_type(0)
+#define FLOPPY1_TYPE		fd_drive_type(1)
+
+#define FDC1			fd_getfdaddr1();
+
+#define N_FDC 1			/* do you *really* want a second controller? */
+#define N_DRIVE 8
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ *
+ * On MIPSes using vdma, this actually means that *all* transfers go thru
+ * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
+ * Actually this needs to be a bit more complicated since the so much different
+ * hardware available with MIPS CPUs ...
+ */
+#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#include <floppy.h>
+
+#endif /* _ASM_FLOPPY_H */
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
new file mode 100644
index 0000000..2b5fddc
--- /dev/null
+++ b/arch/mips/include/asm/fpregdef.h
@@ -0,0 +1,99 @@
+/*
+ * Definitions for the FPU register names
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_FPREGDEF_H
+#define _ASM_FPREGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * These definitions only cover the R3000-ish 16/32 register model.
+ * But we're trying to be R3000 friendly anyway ...
+ */
+#define fv0	$f0      /* return value */
+#define fv0f	$f1
+#define fv1	$f2
+#define fv1f	$f3
+#define fa0	$f12     /* argument registers */
+#define fa0f	$f13
+#define fa1	$f14
+#define fa1f	$f15
+#define ft0	$f4      /* caller saved */
+#define ft0f	$f5
+#define ft1	$f6
+#define ft1f	$f7
+#define ft2	$f8
+#define ft2f	$f9
+#define ft3	$f10
+#define ft3f	$f11
+#define ft4	$f16
+#define ft4f	$f17
+#define ft5	$f18
+#define ft5f	$f19
+#define fs0	$f20     /* callee saved */
+#define fs0f	$f21
+#define fs1	$f22
+#define fs1f	$f23
+#define fs2	$f24
+#define fs2f	$f25
+#define fs3	$f26
+#define fs3f	$f27
+#define fs4	$f28
+#define fs4f	$f29
+#define fs5	$f30
+#define fs5f	$f31
+
+#define fcr31	$31      /* FPU status register */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define fv0	$f0	/* return value */
+#define fv1	$f2
+#define fa0	$f12	/* argument registers */
+#define fa1	$f13
+#define fa2	$f14
+#define fa3	$f15
+#define fa4	$f16
+#define fa5	$f17
+#define fa6	$f18
+#define fa7	$f19
+#define ft0	$f4	/* caller saved */
+#define ft1	$f5
+#define ft2	$f6
+#define ft3	$f7
+#define ft4	$f8
+#define ft5	$f9
+#define ft6	$f10
+#define ft7	$f11
+#define ft8	$f20
+#define ft9	$f21
+#define ft10	$f22
+#define ft11	$f23
+#define ft12	$f1
+#define ft13	$f3
+#define fs0	$f24	/* callee saved */
+#define fs1	$f25
+#define fs2	$f26
+#define fs3	$f27
+#define fs4	$f28
+#define fs5	$f29
+#define fs6	$f30
+#define fs7	$f31
+
+#define fcr31	$31
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_FPREGDEF_H */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
new file mode 100644
index 0000000..8a3ef24
--- /dev/null
+++ b/arch/mips/include/asm/fpu.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/processor.h>
+#include <asm/current.h>
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#include <asm/mips_mt.h>
+#endif
+
+struct sigcontext;
+struct sigcontext32;
+
+extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
+extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
+
+extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
+extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
+
+extern void fpu_emulator_init_fpu(void);
+extern int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
+extern void _init_fpu(void);
+extern void _save_fp(struct task_struct *);
+extern void _restore_fp(struct task_struct *);
+
+#define __enable_fpu()							\
+do {									\
+        set_c0_status(ST0_CU1);						\
+        enable_fpu_hazard();						\
+} while (0)
+
+#define __disable_fpu()							\
+do {									\
+	clear_c0_status(ST0_CU1);					\
+        disable_fpu_hazard();						\
+} while (0)
+
+#define enable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__enable_fpu();						\
+} while (0)
+
+#define disable_fpu()							\
+do {									\
+	if (cpu_has_fpu)						\
+		__disable_fpu();					\
+} while (0)
+
+
+#define clear_fpu_owner()	clear_thread_flag(TIF_USEDFPU)
+
+static inline int __is_fpu_owner(void)
+{
+	return test_thread_flag(TIF_USEDFPU);
+}
+
+static inline int is_fpu_owner(void)
+{
+	return cpu_has_fpu && __is_fpu_owner();
+}
+
+static inline void __own_fpu(void)
+{
+	__enable_fpu();
+	KSTK_STATUS(current) |= ST0_CU1;
+	set_thread_flag(TIF_USEDFPU);
+}
+
+static inline void own_fpu_inatomic(int restore)
+{
+	if (cpu_has_fpu && !__is_fpu_owner()) {
+		__own_fpu();
+		if (restore)
+			_restore_fp(current);
+	}
+}
+
+static inline void own_fpu(int restore)
+{
+	preempt_disable();
+	own_fpu_inatomic(restore);
+	preempt_enable();
+}
+
+static inline void lose_fpu(int save)
+{
+	preempt_disable();
+	if (is_fpu_owner()) {
+		if (save)
+			_save_fp(current);
+		KSTK_STATUS(current) &= ~ST0_CU1;
+		clear_thread_flag(TIF_USEDFPU);
+		__disable_fpu();
+	}
+	preempt_enable();
+}
+
+static inline void init_fpu(void)
+{
+	preempt_disable();
+	if (cpu_has_fpu) {
+		__own_fpu();
+		_init_fpu();
+	} else {
+		fpu_emulator_init_fpu();
+	}
+	preempt_enable();
+}
+
+static inline void save_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_save_fp(tsk);
+}
+
+static inline void restore_fp(struct task_struct *tsk)
+{
+	if (cpu_has_fpu)
+		_restore_fp(tsk);
+}
+
+static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
+{
+	if (tsk == current) {
+		preempt_disable();
+		if (is_fpu_owner())
+			_save_fp(current);
+		preempt_enable();
+	}
+
+	return tsk->thread.fpu.fpr;
+}
+
+#endif /* _ASM_FPU_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
new file mode 100644
index 0000000..2731c38
--- /dev/null
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -0,0 +1,37 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Further private data for which no space exists in mips_fpu_struct.
+ * This should be subsumed into the mips_fpu_struct structure as
+ * defined in processor.h as soon as the absurd wired absolute assembler
+ * offsets become dynamic at compile time.
+ *
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#ifndef _ASM_FPU_EMULATOR_H
+#define _ASM_FPU_EMULATOR_H
+
+struct mips_fpu_emulator_stats {
+	unsigned int emulated;
+	unsigned int loads;
+	unsigned int stores;
+	unsigned int cp1ops;
+	unsigned int cp1xops;
+	unsigned int errors;
+};
+
+extern struct mips_fpu_emulator_stats fpuemustats;
+
+#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
new file mode 100644
index 0000000..b9cce90
--- /dev/null
+++ b/arch/mips/include/asm/futex.h
@@ -0,0 +1,203 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2006  Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/barrier.h>
+#include <asm/errno.h>
+#include <asm/war.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)		\
+{									\
+	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, %2				\n"	\
+		"	beqzl	$1, 1b				\n"	\
+		__WEAK_LLSC_MB						\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %6				\n"	\
+		"	j	3b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=&r" (oldval), "=R" (*uaddr)		\
+		: "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT)	\
+		: "memory");						\
+	} else if (cpu_has_llsc) {					\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, %2				\n"	\
+		"	beqz	$1, 1b				\n"	\
+		__WEAK_LLSC_MB						\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %6				\n"	\
+		"	j	3b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=&r" (oldval), "=R" (*uaddr)		\
+		: "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT)	\
+		: "memory");						\
+	} else								\
+		ret = -ENOSYS;						\
+}
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("move	$1, %z5", ret, oldval, uaddr, oparg);
+		break;
+
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("addu	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and	$1, %1, %z5",
+		                  ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor	$1, %1, %z5",
+		                  ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int retval;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqzl	$1, 1b					\n"
+		__WEAK_LLSC_MB
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqz	$1, 1b					\n"
+		__WEAK_LLSC_MB
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else
+		return -ENOSYS;
+
+	return retval;
+}
+
+#endif
+#endif /* _ASM_FUTEX_H */
diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h
new file mode 100644
index 0000000..e6ff4ad
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/hinv.h
@@ -0,0 +1,175 @@
+/*
+ * ARCS hardware/memory inventory/configuration and system ID definitions.
+ */
+#ifndef _ASM_ARC_HINV_H
+#define _ASM_ARC_HINV_H
+
+#include <asm/sgidefs.h>
+#include <asm/fw/arc/types.h>
+
+/* configuration query defines */
+typedef enum configclass {
+	SystemClass,
+	ProcessorClass,
+	CacheClass,
+#ifndef	_NT_PROM
+	MemoryClass,
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass
+#else	/* _NT_PROM */
+	AdapterClass,
+	ControllerClass,
+	PeripheralClass,
+	MemoryClass
+#endif	/* _NT_PROM */
+} CONFIGCLASS;
+
+typedef enum configtype {
+	ARC,
+	CPU,
+	FPU,
+	PrimaryICache,
+	PrimaryDCache,
+	SecondaryICache,
+	SecondaryDCache,
+	SecondaryCache,
+#ifndef	_NT_PROM
+	Memory,
+#endif
+	EISAAdapter,
+	TCAdapter,
+	SCSIAdapter,
+	DTIAdapter,
+	MultiFunctionAdapter,
+	DiskController,
+	TapeController,
+	CDROMController,
+	WORMController,
+	SerialController,
+	NetworkController,
+	DisplayController,
+	ParallelController,
+	PointerController,
+	KeyboardController,
+	AudioController,
+	OtherController,
+	DiskPeripheral,
+	FloppyDiskPeripheral,
+	TapePeripheral,
+	ModemPeripheral,
+	MonitorPeripheral,
+	PrinterPeripheral,
+	PointerPeripheral,
+	KeyboardPeripheral,
+	TerminalPeripheral,
+	LinePeripheral,
+	NetworkPeripheral,
+#ifdef	_NT_PROM
+	Memory,
+#endif
+	OtherPeripheral,
+
+	/* new stuff for IP30 */
+	/* added without moving anything */
+	/* except ANONYMOUS. */
+
+	XTalkAdapter,
+	PCIAdapter,
+	GIOAdapter,
+	TPUAdapter,
+
+	Anonymous
+} CONFIGTYPE;
+
+typedef enum {
+	Failed = 1,
+	ReadOnly = 2,
+	Removable = 4,
+	ConsoleIn = 8,
+	ConsoleOut = 16,
+	Input = 32,
+	Output = 64
+} IDENTIFIERFLAG;
+
+#ifndef NULL			/* for GetChild(NULL); */
+#define	NULL	0
+#endif
+
+union key_u {
+	struct {
+#ifdef	_MIPSEB
+		unsigned char  c_bsize;		/* block size in lines */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned short c_size;		/* cache size in 4K pages */
+#else	/* _MIPSEL */
+		unsigned short c_size;		/* cache size in 4K pages */
+		unsigned char  c_lsize;		/* line size in bytes/tag */
+		unsigned char  c_bsize;		/* block size in lines */
+#endif	/* _MIPSEL */
+	} cache;
+	ULONG FullKey;
+};
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+#define SGI_ARCS_VERS	64			/* sgi 64-bit version */
+#define SGI_ARCS_REV	0			/* rev .00 */
+#else
+#define SGI_ARCS_VERS	1			/* first version */
+#define SGI_ARCS_REV	10			/* rev .10, 3/04/92 */
+#endif
+
+typedef struct component {
+	CONFIGCLASS	Class;
+	CONFIGTYPE	Type;
+	IDENTIFIERFLAG	Flags;
+	USHORT		Version;
+	USHORT		Revision;
+	ULONG 		Key;
+	ULONG		AffinityMask;
+	ULONG		ConfigurationDataSize;
+	ULONG		IdentifierLength;
+	char		*Identifier;
+} COMPONENT;
+
+/* internal structure that holds pathname parsing data */
+struct cfgdata {
+	char *name;			/* full name */
+	int minlen;			/* minimum length to match */
+	CONFIGTYPE type;		/* type of token */
+};
+
+/* System ID */
+typedef struct systemid {
+	CHAR VendorId[8];
+	CHAR ProductId[8];
+} SYSTEMID;
+
+/* memory query functions */
+typedef enum memorytype {
+	ExceptionBlock,
+	SPBPage,			/* ARCS == SystemParameterBlock */
+#ifndef	_NT_PROM
+	FreeContiguous,
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent
+#else	/* _NT_PROM */
+	FreeMemory,
+	BadMemory,
+	LoadedProgram,
+	FirmwareTemporary,
+	FirmwarePermanent,
+	FreeContiguous
+#endif	/* _NT_PROM */
+} MEMORYTYPE;
+
+typedef struct memorydescriptor {
+	MEMORYTYPE	Type;
+	LONG		BasePage;
+	LONG		PageCount;
+} MEMORYDESCRIPTOR;
+
+#endif /* _ASM_ARC_HINV_H */
diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h
new file mode 100644
index 0000000..b9adcd6
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/types.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ARC_TYPES_H
+#define _ASM_ARC_TYPES_H
+
+
+#ifdef CONFIG_ARC32
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__SI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__SI__)));
+typedef void		VOID;
+
+/* The pointer types.  Note that we're using a 64-bit compiler but all
+   pointer in the ARC structures are only 32-bit, so we need some disgusting
+   workarounds.  Keep your vomit bag handy.  */
+typedef LONG		_PCHAR;
+typedef LONG		_PSHORT;
+typedef LONG		_PLARGE_INTEGER;
+typedef	LONG		_PLONG;
+typedef LONG		_PUCHAR;
+typedef LONG		_PUSHORT;
+typedef LONG		_PULONG;
+typedef LONG		_PVOID;
+
+#endif /* CONFIG_ARC32 */
+
+#ifdef CONFIG_ARC64
+
+typedef char		CHAR;
+typedef short		SHORT;
+typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef	long		LONG __attribute__ ((__mode__ (__DI__)));
+typedef unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef unsigned long	ULONG __attribute__ ((__mode__ (__DI__)));
+typedef void		VOID;
+
+/* The pointer types.  We're 64-bit and the firmware is also 64-bit, so
+   live is sane ...  */
+typedef CHAR		*_PCHAR;
+typedef SHORT		*_PSHORT;
+typedef LARGE_INTEGER	*_PLARGE_INTEGER;
+typedef	LONG		*_PLONG;
+typedef UCHAR		*_PUCHAR;
+typedef USHORT		*_PUSHORT;
+typedef ULONG		*_PULONG;
+typedef VOID		*_PVOID;
+
+#endif /* CONFIG_ARC64  */
+
+typedef CHAR		*PCHAR;
+typedef SHORT		*PSHORT;
+typedef LARGE_INTEGER	*PLARGE_INTEGER;
+typedef	LONG		*PLONG;
+typedef UCHAR		*PUCHAR;
+typedef USHORT		*PUSHORT;
+typedef ULONG		*PULONG;
+typedef VOID		*PVOID;
+
+/*
+ * Return type of ArcGetDisplayStatus()
+ */
+typedef struct {
+	USHORT	CursorXPosition;
+	USHORT	CursorYPosition;
+	USHORT	CursorMaxXPosition;
+	USHORT	CursorMaxYPosition;
+	USHORT	ForegroundColor;
+	USHORT	BackgroundColor;
+	UCHAR	HighIntensity;
+	UCHAR	Underscored;
+	UCHAR	ReverseVideo;
+} DISPLAY_STATUS;
+
+#endif /* _ASM_ARC_TYPES_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h
new file mode 100644
index 0000000..0995575
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_api.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * This file contains declarations for doing callbacks to
+ * cfe from an application.  It should be the only header
+ * needed by the application to use this library
+ *
+ * Authors:  Mitch Lichtenberg, Chris Demetriou
+ */
+#ifndef CFE_API_H
+#define CFE_API_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef long intptr_t;
+
+
+/*
+ * Constants
+ */
+
+/* Seal indicating CFE's presence, passed to user program. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_MI_RESERVED	0	/* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1	/* memory is available */
+
+#define CFE_FLG_WARMSTART     0x00000001
+#define CFE_FLG_FULL_ARENA    0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE	0
+
+#define CFE_DEV_NETWORK 	1
+#define CFE_DEV_DISK		2
+#define CFE_DEV_FLASH		3
+#define CFE_DEV_SERIAL		4
+#define CFE_DEV_CPU		5
+#define CFE_DEV_NVRAM		6
+#define CFE_DEV_CLOCK           7
+#define CFE_DEV_OTHER		8
+#define CFE_DEV_MASK		0x0F
+
+#define CFE_CACHE_FLUSH_D	1
+#define CFE_CACHE_INVAL_I	2
+#define CFE_CACHE_INVAL_D	4
+#define CFE_CACHE_INVAL_L2	8
+
+#define CFE_FWI_64BIT		0x00000001
+#define CFE_FWI_32BIT		0x00000002
+#define CFE_FWI_RELOC		0x00000004
+#define CFE_FWI_UNCACHED	0x00000008
+#define CFE_FWI_MULTICPU	0x00000010
+#define CFE_FWI_FUNCSIM		0x00000020
+#define CFE_FWI_RTLSIM		0x00000040
+
+typedef struct {
+	int64_t fwi_version;		/* major, minor, eco version */
+	int64_t fwi_totalmem;		/* total installed mem */
+	int64_t fwi_flags;		/* various flags */
+	int64_t fwi_boardid;		/* board ID */
+	int64_t fwi_bootarea_va;	/* VA of boot area */
+	int64_t fwi_bootarea_pa;	/* PA of boot area */
+	int64_t fwi_bootarea_size;	/* size of boot area */
+} cfe_fwinfo_t;
+
+
+/*
+ * Defines and prototypes for functions which take no arguments.
+ */
+int64_t cfe_getticks(void);
+
+/*
+ * Defines and prototypes for the rest of the functions.
+ */
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length,
+		uint64_t * type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flg);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(cfe_fwinfo_t * info);
+int cfe_getstdhandle(int flg);
+int cfe_init(uint64_t handle, uint64_t ept);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+	      int length, int *retlen, uint64_t offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, int64_t offset, unsigned char *buffer,
+		int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
+		 int length);
+
+#endif				/* CFE_API_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h
new file mode 100644
index 0000000..b803746
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_error.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * CFE's global error code list is here.
+ *
+ * Author:  Mitch Lichtenberg
+ */
+
+#define CFE_OK			 0
+#define CFE_ERR                 -1	/* generic error */
+#define CFE_ERR_INV_COMMAND	-2
+#define CFE_ERR_EOF		-3
+#define CFE_ERR_IOERR		-4
+#define CFE_ERR_NOMEM		-5
+#define CFE_ERR_DEVNOTFOUND	-6
+#define CFE_ERR_DEVOPEN		-7
+#define CFE_ERR_INV_PARAM	-8
+#define CFE_ERR_ENVNOTFOUND	-9
+#define CFE_ERR_ENVREADONLY	-10
+
+#define CFE_ERR_NOTELF		-11
+#define CFE_ERR_NOT32BIT 	-12
+#define CFE_ERR_WRONGENDIAN 	-13
+#define CFE_ERR_BADELFVERS 	-14
+#define CFE_ERR_NOTMIPS 	-15
+#define CFE_ERR_BADELFFMT 	-16
+#define CFE_ERR_BADADDR 	-17
+
+#define CFE_ERR_FILENOTFOUND	-18
+#define CFE_ERR_UNSUPPORTED	-19
+
+#define CFE_ERR_HOSTUNKNOWN	-20
+
+#define CFE_ERR_TIMEOUT		-21
+
+#define CFE_ERR_PROTOCOLERR	-22
+
+#define CFE_ERR_NETDOWN		-23
+#define CFE_ERR_NONAMESERVER	-24
+
+#define CFE_ERR_NOHANDLES	-25
+#define CFE_ERR_ALREADYBOUND	-26
+
+#define CFE_ERR_CANNOTSET	-27
+#define CFE_ERR_NOMORE		-28
+#define CFE_ERR_BADFILESYS	-29
+#define CFE_ERR_FSNOTAVAIL	-30
+
+#define CFE_ERR_INVBOOTBLOCK	-31
+#define CFE_ERR_WRONGDEVTYPE	-32
+#define CFE_ERR_BBCHECKSUM	-33
+#define CFE_ERR_BOOTPROGCHKSUM	-34
+
+#define CFE_ERR_LDRNOTAVAIL	-35
+
+#define CFE_ERR_NOTREADY	-36
+
+#define CFE_ERR_GETMEM          -37
+#define CFE_ERR_SETMEM          -38
+
+#define CFE_ERR_NOTCONN		-39
+#define CFE_ERR_ADDRINUSE	-40
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
new file mode 100644
index 0000000..d74a8a4
--- /dev/null
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * Multiprocessor Subsystem Register Definitions
+ *
+ */
+#ifndef _ASM_GCMPREGS_H
+#define _ASM_GCMPREGS_H
+
+
+/* Offsets to major blocks within GCMP from GCMP base */
+#define GCMP_GCB_OFS		0x0000 /* Global Control Block */
+#define GCMP_CLCB_OFS		0x2000 /* Core Local Control Block */
+#define GCMP_COCB_OFS		0x4000 /* Core Other Control Block */
+#define GCMP_GDB_OFS		0x8000 /* Global Debug Block */
+
+/* Offsets to individual GCMP registers from GCMP base */
+#define GCMPOFS(block, tag, reg)	(GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
+
+#define GCMPGCBOFS(reg)		GCMPOFS(GCB, GCB, reg)
+#define GCMPCLCBOFS(reg)	GCMPOFS(CLCB, CCB, reg)
+#define GCMPCOCBOFS(reg)	GCMPOFS(COCB, CCB, reg)
+#define GCMPGDBOFS(reg)		GCMPOFS(GDB, GDB, reg)
+
+/* GCMP register access */
+#define GCMPGCB(reg)			REGP(_gcmp_base, GCMPGCBOFS(reg))
+#define GCMPCLCB(reg)			REGP(_gcmp_base, GCMPCLCBOFS(reg))
+#define GCMPCOCB(reg)			REGP(_gcmp_base, GCMPCOCBOFS(reg))
+#define GCMPGDB(reg)			REGP(_gcmp_base, GCMPGDBOFS(reg))
+
+/* Mask generation */
+#define GCMPMSK(block, reg, bits)	(MSK(bits)<<GCMP_##block##_##reg##_SHF)
+#define GCMPGCBMSK(reg, bits)		GCMPMSK(GCB, reg, bits)
+#define GCMPCCBMSK(reg, bits)		GCMPMSK(CCB, reg, bits)
+#define GCMPGDBMSK(reg, bits)		GCMPMSK(GDB, reg, bits)
+
+/* GCB registers */
+#define GCMP_GCB_GC_OFS			0x0000	/* Global Config Register */
+#define  GCMP_GCB_GC_NUMIOCU_SHF	8
+#define  GCMP_GCB_GC_NUMIOCU_MSK	GCMPGCBMSK(GC_NUMIOCU, 4)
+#define  GCMP_GCB_GC_NUMCORES_SHF	0
+#define  GCMP_GCB_GC_NUMCORES_MSK	GCMPGCBMSK(GC_NUMCORES, 8)
+#define GCMP_GCB_GCMPB_OFS		0x0008		/* Global GCMP Base */
+#define  GCMP_GCB_GCMPB_GCMPBASE_SHF	15
+#define  GCMP_GCB_GCMPB_GCMPBASE_MSK	GCMPGCBMSK(GCMPB_GCMPBASE, 17)
+#define  GCMP_GCB_GCMPB_CMDEFTGT_SHF	0
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MSK	GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MEM	0
+#define  GCMP_GCB_GCMPB_CMDEFTGT_MEM1	1
+#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2
+#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3
+#define GCMP_GCB_CCMC_OFS		0x0010	/* Global CM Control */
+#define GCMP_GCB_GCSRAP_OFS		0x0020	/* Global CSR Access Privilege */
+#define  GCMP_GCB_GCSRAP_CMACCESS_SHF	0
+#define  GCMP_GCB_GCSRAP_CMACCESS_MSK	GCMPGCBMSK(GCSRAP_CMACCESS, 8)
+#define GCMP_GCB_GCMPREV_OFS		0x0030	/* GCMP Revision Register */
+#define GCMP_GCB_GCMEM_OFS		0x0040	/* Global CM Error Mask */
+#define GCMP_GCB_GCMEC_OFS		0x0048	/* Global CM Error Cause */
+#define  GCMP_GCB_GMEC_ERROR_TYPE_SHF	27
+#define  GCMP_GCB_GMEC_ERROR_TYPE_MSK	GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
+#define  GCMP_GCB_GMEC_ERROR_INFO_SHF	0
+#define  GCMP_GCB_GMEC_ERROR_INFO_MSK	GCMPGCBMSK(GMEC_ERROR_INFO, 27)
+#define GCMP_GCB_GCMEA_OFS		0x0050	/* Global CM Error Address */
+#define GCMP_GCB_GCMEO_OFS		0x0058	/* Global CM Error Multiple */
+#define  GCMP_GCB_GMEO_ERROR_2ND_SHF	0
+#define  GCMP_GCB_GMEO_ERROR_2ND_MSK	GCMPGCBMSK(GMEO_ERROR_2ND, 5)
+#define GCMP_GCB_GICBA_OFS		0x0080	/* Global Interrupt Controller Base Address */
+#define  GCMP_GCB_GICBA_BASE_SHF	17
+#define  GCMP_GCB_GICBA_BASE_MSK	GCMPGCBMSK(GICBA_BASE, 15)
+#define  GCMP_GCB_GICBA_EN_SHF		0
+#define  GCMP_GCB_GICBA_EN_MSK		GCMPGCBMSK(GICBA_EN, 1)
+
+/* GCB Regions */
+#define GCMP_GCB_CMxBASE_OFS(n)		(0x0090+16*(n))		/* Global Region[0-3] Base Address */
+#define  GCMP_GCB_CMxBASE_BASE_SHF	16
+#define  GCMP_GCB_CMxBASE_BASE_MSK	GCMPGCBMSK(CMxBASE_BASE, 16)
+#define GCMP_GCB_CMxMASK_OFS(n)		(0x0098+16*(n))		/* Global Region[0-3] Address Mask */
+#define  GCMP_GCB_CMxMASK_MASK_SHF	16
+#define  GCMP_GCB_CMxMASK_MASK_MSK	GCMPGCBMSK(CMxMASK_MASK, 16)
+#define  GCMP_GCB_CMxMASK_CMREGTGT_SHF	0
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MSK	GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM	 0
+#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM1  1
+#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
+#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
+
+
+/* Core local/Core other control block registers */
+#define GCMP_CCB_RESETR_OFS		0x0000			/* Reset Release */
+#define  GCMP_CCB_RESETR_INRESET_SHF	0
+#define  GCMP_CCB_RESETR_INRESET_MSK	GCMPCCBMSK(RESETR_INRESET, 16)
+#define GCMP_CCB_COHCTL_OFS		0x0008			/* Coherence Control */
+#define  GCMP_CCB_COHCTL_DOMAIN_SHF	0
+#define  GCMP_CCB_COHCTL_DOMAIN_MSK	GCMPCCBMSK(COHCTL_DOMAIN, 8)
+#define GCMP_CCB_CFG_OFS		0x0010			/* Config */
+#define  GCMP_CCB_CFG_IOCUTYPE_SHF	10
+#define  GCMP_CCB_CFG_IOCUTYPE_MSK	GCMPCCBMSK(CFG_IOCUTYPE, 2)
+#define   GCMP_CCB_CFG_IOCUTYPE_CPU	0
+#define   GCMP_CCB_CFG_IOCUTYPE_NCIOCU	1
+#define   GCMP_CCB_CFG_IOCUTYPE_CIOCU	2
+#define  GCMP_CCB_CFG_NUMVPE_SHF	0
+#define  GCMP_CCB_CFG_NUMVPE_MSK	GCMPCCBMSK(CFG_NUMVPE, 10)
+#define GCMP_CCB_OTHER_OFS		0x0018		/* Other Address */
+#define  GCMP_CCB_OTHER_CORENUM_SHF	16
+#define  GCMP_CCB_OTHER_CORENUM_MSK	GCMPCCBMSK(OTHER_CORENUM, 16)
+#define GCMP_CCB_RESETBASE_OFS		0x0020		/* Reset Exception Base */
+#define  GCMP_CCB_RESETBASE_BEV_SHF	12
+#define  GCMP_CCB_RESETBASE_BEV_MSK	GCMPCCBMSK(RESETBASE_BEV, 20)
+#define GCMP_CCB_ID_OFS			0x0028		/* Identification */
+#define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
+#define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
+
+#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
new file mode 100644
index 0000000..954807d
--- /dev/null
+++ b/arch/mips/include/asm/gic.h
@@ -0,0 +1,487 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * GIC Register Definitions
+ *
+ */
+#ifndef _ASM_GICREGS_H
+#define _ASM_GICREGS_H
+
+#undef	GICISBYTELITTLEENDIAN
+#define GICISWORDLITTLEENDIAN
+
+/* Constants */
+#define GIC_POL_POS			1
+#define GIC_POL_NEG			0
+#define GIC_TRIG_EDGE			1
+#define GIC_TRIG_LEVEL			0
+
+#define GIC_NUM_INTRS			32
+
+#define MSK(n) ((1 << (n)) - 1)
+#define REG32(addr)		(*(volatile unsigned int *) (addr))
+#define REG(base, offs)		REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys)	REG32((unsigned long)(base) + (phys))
+
+/* Accessors */
+#define GIC_REG(segment, offset) \
+	REG32(_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ADDR(segment, offset) \
+	REG32(_gic_base + segment##_##SECTION_OFS + offset)
+
+#define GIC_ABS_REG(segment, offset) \
+       (_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ABS_ADDR(segment, offset) \
+       (_gic_base + segment##_##SECTION_OFS + offset)
+
+#ifdef GICISBYTELITTLEENDIAN
+#define GICREAD(reg, data)	(data) = (reg), (data) = le32_to_cpu(data)
+#define GICWRITE(reg, data)	(reg) = cpu_to_le32(data)
+#define GICBIS(reg, bits)			\
+	({unsigned int data;			\
+		GICREAD(reg, data);		\
+		data |= bits;			\
+		GICWRITE(reg, data);		\
+	})
+
+#else
+#define GICREAD(reg, data)	(data) = (reg)
+#define GICWRITE(reg, data)	(reg) = (data)
+#define GICBIS(reg, bits)	(reg) |= (bits)
+#endif
+
+
+/* GIC Address Space */
+#define SHARED_SECTION_OFS		0x0000
+#define SHARED_SECTION_SIZE		0x8000
+#define VPE_LOCAL_SECTION_OFS		0x8000
+#define VPE_LOCAL_SECTION_SIZE		0x4000
+#define VPE_OTHER_SECTION_OFS		0xc000
+#define VPE_OTHER_SECTION_SIZE		0x4000
+#define USM_VISIBLE_SECTION_OFS		0x10000
+#define USM_VISIBLE_SECTION_SIZE	0x10000
+
+/* Register Map for Shared Section */
+#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN)
+
+#define	GIC_SH_CONFIG_OFS		0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS	0x0010
+#define GIC_SH_COUNTER_63_32_OFS	0x0014
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS		0x0100
+#define GIC_SH_POL_63_32_OFS		0x0104
+#define GIC_SH_POL_95_64_OFS		0x0108
+#define GIC_SH_POL_127_96_OFS		0x010c
+#define GIC_SH_POL_159_128_OFS		0x0110
+#define GIC_SH_POL_191_160_OFS		0x0114
+#define GIC_SH_POL_223_192_OFS		0x0118
+#define GIC_SH_POL_255_224_OFS		0x011c
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS		0x0180
+#define GIC_SH_TRIG_63_32_OFS		0x0184
+#define GIC_SH_TRIG_95_64_OFS		0x0188
+#define GIC_SH_TRIG_127_96_OFS		0x018c
+#define GIC_SH_TRIG_159_128_OFS		0x0190
+#define GIC_SH_TRIG_191_160_OFS		0x0194
+#define GIC_SH_TRIG_223_192_OFS		0x0198
+#define GIC_SH_TRIG_255_224_OFS		0x019c
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS		0x0200
+#define GIC_SH_DUAL_63_32_OFS		0x0204
+#define GIC_SH_DUAL_95_64_OFS		0x0208
+#define GIC_SH_DUAL_127_96_OFS		0x020c
+#define GIC_SH_DUAL_159_128_OFS		0x0210
+#define GIC_SH_DUAL_191_160_OFS		0x0214
+#define GIC_SH_DUAL_223_192_OFS		0x0218
+#define GIC_SH_DUAL_255_224_OFS		0x021c
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS		0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS		0x0300
+#define GIC_SH_RMASK_63_32_OFS		0x0304
+#define GIC_SH_RMASK_95_64_OFS		0x0308
+#define GIC_SH_RMASK_127_96_OFS		0x030c
+#define GIC_SH_RMASK_159_128_OFS	0x0310
+#define GIC_SH_RMASK_191_160_OFS	0x0314
+#define GIC_SH_RMASK_223_192_OFS	0x0318
+#define GIC_SH_RMASK_255_224_OFS	0x031c
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS		0x0380
+#define GIC_SH_SMASK_63_32_OFS		0x0384
+#define GIC_SH_SMASK_95_64_OFS		0x0388
+#define GIC_SH_SMASK_127_96_OFS		0x038c
+#define GIC_SH_SMASK_159_128_OFS	0x0390
+#define GIC_SH_SMASK_191_160_OFS	0x0394
+#define GIC_SH_SMASK_223_192_OFS	0x0398
+#define GIC_SH_SMASK_255_224_OFS	0x039c
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS		0x0400
+#define GIC_SH_MASK_63_32_OFS		0x0404
+#define GIC_SH_MASK_95_64_OFS		0x0408
+#define GIC_SH_MASK_127_96_OFS		0x040c
+#define GIC_SH_MASK_159_128_OFS		0x0410
+#define GIC_SH_MASK_191_160_OFS		0x0414
+#define GIC_SH_MASK_223_192_OFS		0x0418
+#define GIC_SH_MASK_255_224_OFS		0x041c
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS		0x0480
+#define GIC_SH_PEND_63_32_OFS		0x0484
+#define GIC_SH_PEND_95_64_OFS		0x0488
+#define GIC_SH_PEND_127_96_OFS		0x048c
+#define GIC_SH_PEND_159_128_OFS		0x0490
+#define GIC_SH_PEND_191_160_OFS		0x0494
+#define GIC_SH_PEND_223_192_OFS		0x0498
+#define GIC_SH_PEND_255_224_OFS		0x049c
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS	0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+	(GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS	0x2000
+
+/* Maps Interrupt X to a VPE */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+	(GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe)	(1 << ((vpe) % 32))
+
+/* Polarity : Reset Value is always 0 */
+#define GIC_SH_SET_POLARITY_OFS		0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering : Reset Value is always 0 */
+#define GIC_SH_SET_TRIGGER_OFS		0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS		0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS		0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS			0x0000
+#define GIC_VPE_PEND_OFS		0x0004
+#define GIC_VPE_MASK_OFS		0x0008
+#define GIC_VPE_RMASK_OFS		0x000c
+#define GIC_VPE_SMASK_OFS		0x0010
+#define GIC_VPE_WD_MAP_OFS		0x0040
+#define GIC_VPE_COMPARE_MAP_OFS		0x0044
+#define GIC_VPE_TIMER_MAP_OFS		0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS		0x0050
+#define GIC_VPE_SWINT0_MAP_OFS		0x0054
+#define GIC_VPE_SWINT1_MAP_OFS		0x0058
+#define GIC_VPE_OTHER_ADDR_OFS		0x0080
+#define GIC_VPE_WD_CONFIG0_OFS		0x0090
+#define GIC_VPE_WD_COUNT0_OFS		0x0094
+#define GIC_VPE_WD_INITIAL0_OFS		0x0098
+#define GIC_VPE_COMPARE_LO_OFS		0x00a0
+#define GIC_VPE_COMPARE_HI		0x00a4
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
+#define GIC_VPE_EIC_SS(intr) \
+	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE		0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+	(GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS		0x1000
+#define GIC_VPE_TENABLE_YQ_OFS		0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS	0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS	0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS	0x0000
+#define GIC_UMV_SH_COUNTER_63_32_OFS	0x0004
+
+#else /* CONFIG_CPU_BIG_ENDIAN */
+
+#define	GIC_SH_CONFIG_OFS		0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS	0x0014
+#define GIC_SH_COUNTER_63_32_OFS	0x0010
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS		0x0104
+#define GIC_SH_POL_63_32_OFS		0x0100
+#define GIC_SH_POL_95_64_OFS		0x010c
+#define GIC_SH_POL_127_96_OFS		0x0108
+#define GIC_SH_POL_159_128_OFS		0x0114
+#define GIC_SH_POL_191_160_OFS		0x0110
+#define GIC_SH_POL_223_192_OFS		0x011c
+#define GIC_SH_POL_255_224_OFS		0x0118
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS		0x0184
+#define GIC_SH_TRIG_63_32_OFS		0x0180
+#define GIC_SH_TRIG_95_64_OFS		0x018c
+#define GIC_SH_TRIG_127_96_OFS		0x0188
+#define GIC_SH_TRIG_159_128_OFS		0x0194
+#define GIC_SH_TRIG_191_160_OFS		0x0190
+#define GIC_SH_TRIG_223_192_OFS		0x019c
+#define GIC_SH_TRIG_255_224_OFS		0x0198
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS		0x0204
+#define GIC_SH_DUAL_63_32_OFS		0x0200
+#define GIC_SH_DUAL_95_64_OFS		0x020c
+#define GIC_SH_DUAL_127_96_OFS		0x0208
+#define GIC_SH_DUAL_159_128_OFS		0x0214
+#define GIC_SH_DUAL_191_160_OFS		0x0210
+#define GIC_SH_DUAL_223_192_OFS		0x021c
+#define GIC_SH_DUAL_255_224_OFS		0x0218
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS		0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS		0x0304
+#define GIC_SH_RMASK_63_32_OFS		0x0300
+#define GIC_SH_RMASK_95_64_OFS		0x030c
+#define GIC_SH_RMASK_127_96_OFS		0x0308
+#define GIC_SH_RMASK_159_128_OFS	0x0314
+#define GIC_SH_RMASK_191_160_OFS	0x0310
+#define GIC_SH_RMASK_223_192_OFS	0x031c
+#define GIC_SH_RMASK_255_224_OFS	0x0318
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS		0x0384
+#define GIC_SH_SMASK_63_32_OFS		0x0380
+#define GIC_SH_SMASK_95_64_OFS		0x038c
+#define GIC_SH_SMASK_127_96_OFS		0x0388
+#define GIC_SH_SMASK_159_128_OFS	0x0394
+#define GIC_SH_SMASK_191_160_OFS	0x0390
+#define GIC_SH_SMASK_223_192_OFS	0x039c
+#define GIC_SH_SMASK_255_224_OFS	0x0398
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS		0x0404
+#define GIC_SH_MASK_63_32_OFS		0x0400
+#define GIC_SH_MASK_95_64_OFS		0x040c
+#define GIC_SH_MASK_127_96_OFS		0x0408
+#define GIC_SH_MASK_159_128_OFS		0x0414
+#define GIC_SH_MASK_191_160_OFS		0x0410
+#define GIC_SH_MASK_223_192_OFS		0x041c
+#define GIC_SH_MASK_255_224_OFS		0x0418
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS		0x0484
+#define GIC_SH_PEND_63_32_OFS		0x0480
+#define GIC_SH_PEND_95_64_OFS		0x048c
+#define GIC_SH_PEND_127_96_OFS		0x0488
+#define GIC_SH_PEND_159_128_OFS		0x0494
+#define GIC_SH_PEND_191_160_OFS		0x0490
+#define GIC_SH_PEND_223_192_OFS		0x049c
+#define GIC_SH_PEND_255_224_OFS		0x0498
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS	0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+	(GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS	0x2004
+
+/*
+ * Maps Interrupt X to a VPE.  This is more complex than the LE case, as
+ * odd and even registers need to be transposed.  It does work - trust me!
+ */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+	(GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \
+	(((((vpe) / 32) ^ 1) - 1) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe)	(1 << ((vpe) % 32))
+
+/* Polarity */
+#define GIC_SH_SET_POLARITY_OFS		0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering */
+#define GIC_SH_SET_TRIGGER_OFS		0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+	GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS		0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS		0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS			0x0000
+#define GIC_VPE_PEND_OFS		0x0004
+#define GIC_VPE_MASK_OFS		0x0008
+#define GIC_VPE_RMASK_OFS		0x000c
+#define GIC_VPE_SMASK_OFS		0x0010
+#define GIC_VPE_WD_MAP_OFS		0x0040
+#define GIC_VPE_COMPARE_MAP_OFS		0x0044
+#define GIC_VPE_TIMER_MAP_OFS		0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS		0x0050
+#define GIC_VPE_SWINT0_MAP_OFS		0x0054
+#define GIC_VPE_SWINT1_MAP_OFS		0x0058
+#define GIC_VPE_OTHER_ADDR_OFS		0x0080
+#define GIC_VPE_WD_CONFIG0_OFS		0x0090
+#define GIC_VPE_WD_COUNT0_OFS		0x0094
+#define GIC_VPE_WD_INITIAL0_OFS		0x0098
+#define GIC_VPE_COMPARE_LO_OFS		0x00a4
+#define GIC_VPE_COMPARE_HI_OFS		0x00a0
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
+#define GIC_VPE_EIC_SS(intr) \
+	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE		0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+	(GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS		0x1000
+#define GIC_VPE_TENABLE_YQ_OFS		0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS	0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS	0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS	0x0004
+#define GIC_UMV_SH_COUNTER_63_32_OFS	0x0000
+
+#endif /* !LE */
+
+/* Masks */
+#define GIC_SH_CONFIG_COUNTSTOP_SHF	28
+#define GIC_SH_CONFIG_COUNTSTOP_MSK	(MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
+
+#define GIC_SH_CONFIG_COUNTBITS_SHF	24
+#define GIC_SH_CONFIG_COUNTBITS_MSK	(MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
+
+#define GIC_SH_CONFIG_NUMINTRS_SHF	16
+#define GIC_SH_CONFIG_NUMINTRS_MSK	(MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
+
+#define GIC_SH_CONFIG_NUMVPES_SHF	0
+#define GIC_SH_CONFIG_NUMVPES_MSK	(MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
+
+#define GIC_SH_WEDGE_SET(intr)		(intr | (0x1 << 31))
+#define GIC_SH_WEDGE_CLR(intr)		(intr & ~(0x1 << 31))
+
+#define GIC_MAP_TO_PIN_SHF		31
+#define GIC_MAP_TO_PIN_MSK		(MSK(1) << GIC_MAP_TO_PIN_SHF)
+#define GIC_MAP_TO_NMI_SHF		30
+#define GIC_MAP_TO_NMI_MSK		(MSK(1) << GIC_MAP_TO_NMI_SHF)
+#define GIC_MAP_TO_YQ_SHF		29
+#define GIC_MAP_TO_YQ_MSK		(MSK(1) << GIC_MAP_TO_YQ_SHF)
+#define GIC_MAP_SHF			0
+#define GIC_MAP_MSK			(MSK(6) << GIC_MAP_SHF)
+
+/* GIC_VPE_CTL Masks */
+#define GIC_VPE_CTL_PERFCNT_RTBL_SHF	2
+#define GIC_VPE_CTL_PERFCNT_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
+#define GIC_VPE_CTL_TIMER_RTBL_SHF	1
+#define GIC_VPE_CTL_TIMER_RTBL_MSK	(MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF)
+#define GIC_VPE_CTL_EIC_MODE_SHF	0
+#define GIC_VPE_CTL_EIC_MODE_MSK	(MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF)
+
+/* GIC_VPE_PEND Masks */
+#define GIC_VPE_PEND_WD_SHF		0
+#define GIC_VPE_PEND_WD_MSK		(MSK(1) << GIC_VPE_PEND_WD_SHF)
+#define GIC_VPE_PEND_CMP_SHF		1
+#define GIC_VPE_PEND_CMP_MSK		(MSK(1) << GIC_VPE_PEND_CMP_SHF)
+#define GIC_VPE_PEND_TIMER_SHF		2
+#define GIC_VPE_PEND_TIMER_MSK		(MSK(1) << GIC_VPE_PEND_TIMER_SHF)
+#define GIC_VPE_PEND_PERFCOUNT_SHF	3
+#define GIC_VPE_PEND_PERFCOUNT_MSK	(MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF)
+#define GIC_VPE_PEND_SWINT0_SHF		4
+#define GIC_VPE_PEND_SWINT0_MSK		(MSK(1) << GIC_VPE_PEND_SWINT0_SHF)
+#define GIC_VPE_PEND_SWINT1_SHF		5
+#define GIC_VPE_PEND_SWINT1_MSK		(MSK(1) << GIC_VPE_PEND_SWINT1_SHF)
+
+/* GIC_VPE_RMASK Masks */
+#define GIC_VPE_RMASK_WD_SHF		0
+#define GIC_VPE_RMASK_WD_MSK		(MSK(1) << GIC_VPE_RMASK_WD_SHF)
+#define GIC_VPE_RMASK_CMP_SHF		1
+#define GIC_VPE_RMASK_CMP_MSK		(MSK(1) << GIC_VPE_RMASK_CMP_SHF)
+#define GIC_VPE_RMASK_TIMER_SHF		2
+#define GIC_VPE_RMASK_TIMER_MSK		(MSK(1) << GIC_VPE_RMASK_TIMER_SHF)
+#define GIC_VPE_RMASK_PERFCNT_SHF	3
+#define GIC_VPE_RMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF)
+#define GIC_VPE_RMASK_SWINT0_SHF	4
+#define GIC_VPE_RMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT0_SHF)
+#define GIC_VPE_RMASK_SWINT1_SHF	5
+#define GIC_VPE_RMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_RMASK_SWINT1_SHF)
+
+/* GIC_VPE_SMASK Masks */
+#define GIC_VPE_SMASK_WD_SHF		0
+#define GIC_VPE_SMASK_WD_MSK		(MSK(1) << GIC_VPE_SMASK_WD_SHF)
+#define GIC_VPE_SMASK_CMP_SHF		1
+#define GIC_VPE_SMASK_CMP_MSK		(MSK(1) << GIC_VPE_SMASK_CMP_SHF)
+#define GIC_VPE_SMASK_TIMER_SHF		2
+#define GIC_VPE_SMASK_TIMER_MSK		(MSK(1) << GIC_VPE_SMASK_TIMER_SHF)
+#define GIC_VPE_SMASK_PERFCNT_SHF	3
+#define GIC_VPE_SMASK_PERFCNT_MSK	(MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF)
+#define GIC_VPE_SMASK_SWINT0_SHF	4
+#define GIC_VPE_SMASK_SWINT0_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT0_SHF)
+#define GIC_VPE_SMASK_SWINT1_SHF	5
+#define GIC_VPE_SMASK_SWINT1_MSK	(MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
+
+/*
+ * Set the Mapping of Interrupt X to a VPE.
+ */
+#define GIC_SH_MAP_TO_VPE_SMASK(intr, vpe) \
+	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
+		 GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
+
+struct gic_pcpu_mask {
+       DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
+};
+
+struct gic_pending_regs {
+       DECLARE_BITMAP(pending, GIC_NUM_INTRS);
+};
+
+struct gic_intrmask_regs {
+       DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
+};
+
+/*
+ * Interrupt Meta-data specification. The ipiflag helps
+ * in building ipi_map.
+ */
+struct gic_intr_map {
+	unsigned int intrnum; 	/* Ext Intr Num 	*/
+	unsigned int cpunum;	/* Directed to this CPU */
+	unsigned int pin;	/* Directed to this Pin */
+	unsigned int polarity;	/* Polarity : +/-	*/
+	unsigned int trigtype;	/* Trigger  : Edge/Levl */
+	unsigned int ipiflag;	/* Is used for IPI ?	*/
+};
+
+extern void gic_init(unsigned long gic_base_addr,
+	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
+	unsigned int intrmap_size, unsigned int irqbase);
+
+extern unsigned int gic_get_int(void);
+extern void gic_send_ipi(unsigned int intr);
+
+#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h
new file mode 100644
index 0000000..06e46fa
--- /dev/null
+++ b/arch/mips/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MIPS_GPIO_H
+#define __ASM_MIPS_GPIO_H
+
+#include <gpio.h>
+
+#endif /* __ASM_MIPS_GPIO_H */
diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h
new file mode 100644
index 0000000..e64b410
--- /dev/null
+++ b/arch/mips/include/asm/gt64120.h
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _ASM_GT64120_H
+#define _ASM_GT64120_H
+
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#define MSK(n)			((1 << (n)) - 1)
+
+/*
+ *  Register offset addresses
+ */
+/* CPU Configuration.  */
+#define GT_CPU_OFS		0x000
+
+#define GT_MULTI_OFS		0x120
+
+/* CPU Address Decode.  */
+#define GT_SCS10LD_OFS		0x008
+#define GT_SCS10HD_OFS		0x010
+#define GT_SCS32LD_OFS		0x018
+#define GT_SCS32HD_OFS		0x020
+#define GT_CS20LD_OFS		0x028
+#define GT_CS20HD_OFS		0x030
+#define GT_CS3BOOTLD_OFS	0x038
+#define GT_CS3BOOTHD_OFS	0x040
+#define GT_PCI0IOLD_OFS		0x048
+#define GT_PCI0IOHD_OFS		0x050
+#define GT_PCI0M0LD_OFS		0x058
+#define GT_PCI0M0HD_OFS		0x060
+#define GT_ISD_OFS		0x068
+
+#define GT_PCI0M1LD_OFS		0x080
+#define GT_PCI0M1HD_OFS		0x088
+#define GT_PCI1IOLD_OFS		0x090
+#define GT_PCI1IOHD_OFS		0x098
+#define GT_PCI1M0LD_OFS		0x0a0
+#define GT_PCI1M0HD_OFS		0x0a8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+#define GT_PCI1M1LD_OFS		0x0b0
+#define GT_PCI1M1HD_OFS		0x0b8
+
+#define GT_SCS10AR_OFS		0x0d0
+#define GT_SCS32AR_OFS		0x0d8
+#define GT_CS20R_OFS		0x0e0
+#define GT_CS3BOOTR_OFS		0x0e8
+
+#define GT_PCI0IOREMAP_OFS	0x0f0
+#define GT_PCI0M0REMAP_OFS	0x0f8
+#define GT_PCI0M1REMAP_OFS	0x100
+#define GT_PCI1IOREMAP_OFS	0x108
+#define GT_PCI1M0REMAP_OFS	0x110
+#define GT_PCI1M1REMAP_OFS	0x118
+
+/* CPU Error Report.  */
+#define GT_CPUERR_ADDRLO_OFS	0x070
+#define GT_CPUERR_ADDRHI_OFS	0x078
+
+#define GT_CPUERR_DATALO_OFS	0x128			/* GT-64120A only  */
+#define GT_CPUERR_DATAHI_OFS	0x130			/* GT-64120A only  */
+#define GT_CPUERR_PARITY_OFS	0x138			/* GT-64120A only  */
+
+/* CPU Sync Barrier.  */
+#define GT_PCI0SYNC_OFS		0x0c0
+#define GT_PCI1SYNC_OFS		0x0c8
+
+/* SDRAM and Device Address Decode.  */
+#define GT_SCS0LD_OFS		0x400
+#define GT_SCS0HD_OFS		0x404
+#define GT_SCS1LD_OFS		0x408
+#define GT_SCS1HD_OFS		0x40c
+#define GT_SCS2LD_OFS		0x410
+#define GT_SCS2HD_OFS		0x414
+#define GT_SCS3LD_OFS		0x418
+#define GT_SCS3HD_OFS		0x41c
+#define GT_CS0LD_OFS		0x420
+#define GT_CS0HD_OFS		0x424
+#define GT_CS1LD_OFS		0x428
+#define GT_CS1HD_OFS		0x42c
+#define GT_CS2LD_OFS		0x430
+#define GT_CS2HD_OFS		0x434
+#define GT_CS3LD_OFS		0x438
+#define GT_CS3HD_OFS		0x43c
+#define GT_BOOTLD_OFS		0x440
+#define GT_BOOTHD_OFS		0x444
+
+#define GT_ADERR_OFS		0x470
+
+/* SDRAM Configuration.  */
+#define GT_SDRAM_CFG_OFS	0x448
+
+#define GT_SDRAM_OPMODE_OFS	0x474
+#define GT_SDRAM_BM_OFS		0x478
+#define GT_SDRAM_ADDRDECODE_OFS	0x47c
+
+/* SDRAM Parameters.  */
+#define GT_SDRAM_B0_OFS		0x44c
+#define GT_SDRAM_B1_OFS		0x450
+#define GT_SDRAM_B2_OFS		0x454
+#define GT_SDRAM_B3_OFS		0x458
+
+/* Device Parameters.  */
+#define GT_DEV_B0_OFS		0x45c
+#define GT_DEV_B1_OFS		0x460
+#define GT_DEV_B2_OFS		0x464
+#define GT_DEV_B3_OFS		0x468
+#define GT_DEV_BOOT_OFS		0x46c
+
+/* ECC.  */
+#define GT_ECC_ERRDATALO	0x480			/* GT-64120A only  */
+#define GT_ECC_ERRDATAHI	0x484			/* GT-64120A only  */
+#define GT_ECC_MEM		0x488			/* GT-64120A only  */
+#define GT_ECC_CALC		0x48c			/* GT-64120A only  */
+#define GT_ECC_ERRADDR		0x490			/* GT-64120A only  */
+
+/* DMA Record.  */
+#define GT_DMA0_CNT_OFS		0x800
+#define GT_DMA1_CNT_OFS		0x804
+#define GT_DMA2_CNT_OFS		0x808
+#define GT_DMA3_CNT_OFS		0x80c
+#define GT_DMA0_SA_OFS		0x810
+#define GT_DMA1_SA_OFS		0x814
+#define GT_DMA2_SA_OFS		0x818
+#define GT_DMA3_SA_OFS		0x81c
+#define GT_DMA0_DA_OFS		0x820
+#define GT_DMA1_DA_OFS		0x824
+#define GT_DMA2_DA_OFS		0x828
+#define GT_DMA3_DA_OFS		0x82c
+#define GT_DMA0_NEXT_OFS	0x830
+#define GT_DMA1_NEXT_OFS	0x834
+#define GT_DMA2_NEXT_OFS	0x838
+#define GT_DMA3_NEXT_OFS	0x83c
+
+#define GT_DMA0_CUR_OFS		0x870
+#define GT_DMA1_CUR_OFS		0x874
+#define GT_DMA2_CUR_OFS		0x878
+#define GT_DMA3_CUR_OFS		0x87c
+
+/* DMA Channel Control.  */
+#define GT_DMA0_CTRL_OFS	0x840
+#define GT_DMA1_CTRL_OFS	0x844
+#define GT_DMA2_CTRL_OFS	0x848
+#define GT_DMA3_CTRL_OFS	0x84c
+
+/* DMA Arbiter.  */
+#define GT_DMA_ARB_OFS		0x860
+
+/* Timer/Counter.  */
+#define GT_TC0_OFS		0x850
+#define GT_TC1_OFS		0x854
+#define GT_TC2_OFS		0x858
+#define GT_TC3_OFS		0x85c
+
+#define GT_TC_CONTROL_OFS	0x864
+
+/* PCI Internal.  */
+#define GT_PCI0_CMD_OFS		0xc00
+#define GT_PCI0_TOR_OFS		0xc04
+#define GT_PCI0_BS_SCS10_OFS	0xc08
+#define GT_PCI0_BS_SCS32_OFS	0xc0c
+#define GT_PCI0_BS_CS20_OFS	0xc10
+#define GT_PCI0_BS_CS3BT_OFS	0xc14
+
+#define GT_PCI1_IACK_OFS	0xc30
+#define GT_PCI0_IACK_OFS	0xc34
+
+#define GT_PCI0_BARE_OFS	0xc3c
+#define GT_PCI0_PREFMBR_OFS	0xc40
+
+#define GT_PCI0_SCS10_BAR_OFS	0xc48
+#define GT_PCI0_SCS32_BAR_OFS	0xc4c
+#define GT_PCI0_CS20_BAR_OFS	0xc50
+#define GT_PCI0_CS3BT_BAR_OFS	0xc54
+#define GT_PCI0_SSCS10_BAR_OFS	0xc58
+#define GT_PCI0_SSCS32_BAR_OFS	0xc5c
+
+#define GT_PCI0_SCS3BT_BAR_OFS	0xc64
+
+#define GT_PCI1_CMD_OFS		0xc80
+#define GT_PCI1_TOR_OFS		0xc84
+#define GT_PCI1_BS_SCS10_OFS	0xc88
+#define GT_PCI1_BS_SCS32_OFS	0xc8c
+#define GT_PCI1_BS_CS20_OFS	0xc90
+#define GT_PCI1_BS_CS3BT_OFS	0xc94
+
+#define GT_PCI1_BARE_OFS	0xcbc
+#define GT_PCI1_PREFMBR_OFS	0xcc0
+
+#define GT_PCI1_SCS10_BAR_OFS	0xcc8
+#define GT_PCI1_SCS32_BAR_OFS	0xccc
+#define GT_PCI1_CS20_BAR_OFS	0xcd0
+#define GT_PCI1_CS3BT_BAR_OFS	0xcd4
+#define GT_PCI1_SSCS10_BAR_OFS	0xcd8
+#define GT_PCI1_SSCS32_BAR_OFS	0xcdc
+
+#define GT_PCI1_SCS3BT_BAR_OFS	0xce4
+
+#define GT_PCI1_CFGADDR_OFS	0xcf0
+#define GT_PCI1_CFGDATA_OFS	0xcf4
+#define GT_PCI0_CFGADDR_OFS	0xcf8
+#define GT_PCI0_CFGDATA_OFS	0xcfc
+
+/* Interrupts.  */
+#define GT_INTRCAUSE_OFS	0xc18
+#define GT_INTRMASK_OFS		0xc1c
+
+#define GT_PCI0_ICMASK_OFS	0xc24
+#define GT_PCI0_SERR0MASK_OFS	0xc28
+
+#define GT_CPU_INTSEL_OFS	0xc70
+#define GT_PCI0_INTSEL_OFS	0xc74
+
+#define GT_HINTRCAUSE_OFS	0xc98
+#define GT_HINTRMASK_OFS	0xc9c
+
+#define GT_PCI0_HICMASK_OFS	0xca4
+#define GT_PCI1_SERR1MASK_OFS	0xca8
+
+
+/*
+ * I2O Support Registers
+ */
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE		0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE		0x01c
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE		0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE		0x02c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE	0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE	0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE	0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE			0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE		0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x06c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE	0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE	0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE	0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE	0x07c
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE		0x1c18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE		0x1c1c
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE		0x1c2c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE	0x1c30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE	0x1c34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE	0x1c44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE			0x1c50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE		0x1c54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c6c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE	0x1c78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE	0x1c7c
+
+/*
+ *  Register encodings
+ */
+#define GT_CPU_ENDIAN_SHF	12
+#define GT_CPU_ENDIAN_MSK	(MSK(1) << GT_CPU_ENDIAN_SHF)
+#define GT_CPU_ENDIAN_BIT	GT_CPU_ENDIAN_MSK
+#define GT_CPU_WR_SHF		16
+#define GT_CPU_WR_MSK		(MSK(1) << GT_CPU_WR_SHF)
+#define GT_CPU_WR_BIT		GT_CPU_WR_MSK
+#define GT_CPU_WR_DXDXDXDX	0
+#define GT_CPU_WR_DDDD		1
+
+
+#define GT_PCI_DCRM_SHF		21
+#define GT_PCI_LD_SHF		0
+#define GT_PCI_LD_MSK		(MSK(15) << GT_PCI_LD_SHF)
+#define GT_PCI_HD_SHF		0
+#define GT_PCI_HD_MSK		(MSK(7) << GT_PCI_HD_SHF)
+#define GT_PCI_REMAP_SHF	0
+#define GT_PCI_REMAP_MSK	(MSK(11) << GT_PCI_REMAP_SHF)
+
+
+#define GT_CFGADDR_CFGEN_SHF	31
+#define GT_CFGADDR_CFGEN_MSK	(MSK(1) << GT_CFGADDR_CFGEN_SHF)
+#define GT_CFGADDR_CFGEN_BIT	GT_CFGADDR_CFGEN_MSK
+
+#define GT_CFGADDR_BUSNUM_SHF	16
+#define GT_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_CFGADDR_BUSNUM_SHF)
+
+#define GT_CFGADDR_DEVNUM_SHF	11
+#define GT_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_CFGADDR_DEVNUM_SHF)
+
+#define GT_CFGADDR_FUNCNUM_SHF	8
+#define GT_CFGADDR_FUNCNUM_MSK	(MSK(3) << GT_CFGADDR_FUNCNUM_SHF)
+
+#define GT_CFGADDR_REGNUM_SHF	2
+#define GT_CFGADDR_REGNUM_MSK	(MSK(6) << GT_CFGADDR_REGNUM_SHF)
+
+
+#define GT_SDRAM_BM_ORDER_SHF	2
+#define GT_SDRAM_BM_ORDER_MSK	(MSK(1) << GT_SDRAM_BM_ORDER_SHF)
+#define GT_SDRAM_BM_ORDER_BIT	GT_SDRAM_BM_ORDER_MSK
+#define GT_SDRAM_BM_ORDER_SUB	1
+#define GT_SDRAM_BM_ORDER_LIN	0
+
+#define GT_SDRAM_BM_RSVD_ALL1	0xffb
+
+
+#define GT_SDRAM_ADDRDECODE_ADDR_SHF	0
+#define GT_SDRAM_ADDRDECODE_ADDR_MSK	(MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF)
+#define GT_SDRAM_ADDRDECODE_ADDR_0	0
+#define GT_SDRAM_ADDRDECODE_ADDR_1	1
+#define GT_SDRAM_ADDRDECODE_ADDR_2	2
+#define GT_SDRAM_ADDRDECODE_ADDR_3	3
+#define GT_SDRAM_ADDRDECODE_ADDR_4	4
+#define GT_SDRAM_ADDRDECODE_ADDR_5	5
+#define GT_SDRAM_ADDRDECODE_ADDR_6	6
+#define GT_SDRAM_ADDRDECODE_ADDR_7	7
+
+
+#define GT_SDRAM_B0_CASLAT_SHF		0
+#define GT_SDRAM_B0_CASLAT_MSK		(MSK(2) << GT_SDRAM_B0__SHF)
+#define GT_SDRAM_B0_CASLAT_2		1
+#define GT_SDRAM_B0_CASLAT_3		2
+
+#define GT_SDRAM_B0_FTDIS_SHF		2
+#define GT_SDRAM_B0_FTDIS_MSK		(MSK(1) << GT_SDRAM_B0_FTDIS_SHF)
+#define GT_SDRAM_B0_FTDIS_BIT		GT_SDRAM_B0_FTDIS_MSK
+
+#define GT_SDRAM_B0_SRASPRCHG_SHF	3
+#define GT_SDRAM_B0_SRASPRCHG_MSK	(MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF)
+#define GT_SDRAM_B0_SRASPRCHG_BIT	GT_SDRAM_B0_SRASPRCHG_MSK
+#define GT_SDRAM_B0_SRASPRCHG_2		0
+#define GT_SDRAM_B0_SRASPRCHG_3		1
+
+#define GT_SDRAM_B0_B0COMPAB_SHF	4
+#define GT_SDRAM_B0_B0COMPAB_MSK	(MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF)
+#define GT_SDRAM_B0_B0COMPAB_BIT	GT_SDRAM_B0_B0COMPAB_MSK
+
+#define GT_SDRAM_B0_64BITINT_SHF	5
+#define GT_SDRAM_B0_64BITINT_MSK	(MSK(1) << GT_SDRAM_B0_64BITINT_SHF)
+#define GT_SDRAM_B0_64BITINT_BIT	GT_SDRAM_B0_64BITINT_MSK
+#define GT_SDRAM_B0_64BITINT_2		0
+#define GT_SDRAM_B0_64BITINT_4		1
+
+#define GT_SDRAM_B0_BW_SHF		6
+#define GT_SDRAM_B0_BW_MSK		(MSK(1) << GT_SDRAM_B0_BW_SHF)
+#define GT_SDRAM_B0_BW_BIT		GT_SDRAM_B0_BW_MSK
+#define GT_SDRAM_B0_BW_32		0
+#define GT_SDRAM_B0_BW_64		1
+
+#define GT_SDRAM_B0_BLODD_SHF		7
+#define GT_SDRAM_B0_BLODD_MSK		(MSK(1) << GT_SDRAM_B0_BLODD_SHF)
+#define GT_SDRAM_B0_BLODD_BIT		GT_SDRAM_B0_BLODD_MSK
+
+#define GT_SDRAM_B0_PAR_SHF		8
+#define GT_SDRAM_B0_PAR_MSK		(MSK(1) << GT_SDRAM_B0_PAR_SHF)
+#define GT_SDRAM_B0_PAR_BIT		GT_SDRAM_B0_PAR_MSK
+
+#define GT_SDRAM_B0_BYPASS_SHF		9
+#define GT_SDRAM_B0_BYPASS_MSK		(MSK(1) << GT_SDRAM_B0_BYPASS_SHF)
+#define GT_SDRAM_B0_BYPASS_BIT		GT_SDRAM_B0_BYPASS_MSK
+
+#define GT_SDRAM_B0_SRAS2SCAS_SHF	10
+#define GT_SDRAM_B0_SRAS2SCAS_MSK	(MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF)
+#define GT_SDRAM_B0_SRAS2SCAS_BIT	GT_SDRAM_B0_SRAS2SCAS_MSK
+#define GT_SDRAM_B0_SRAS2SCAS_2		0
+#define GT_SDRAM_B0_SRAS2SCAS_3		1
+
+#define GT_SDRAM_B0_SIZE_SHF		11
+#define GT_SDRAM_B0_SIZE_MSK		(MSK(1) << GT_SDRAM_B0_SIZE_SHF)
+#define GT_SDRAM_B0_SIZE_BIT		GT_SDRAM_B0_SIZE_MSK
+#define GT_SDRAM_B0_SIZE_16M		0
+#define GT_SDRAM_B0_SIZE_64M		1
+
+#define GT_SDRAM_B0_EXTPAR_SHF		12
+#define GT_SDRAM_B0_EXTPAR_MSK		(MSK(1) << GT_SDRAM_B0_EXTPAR_SHF)
+#define GT_SDRAM_B0_EXTPAR_BIT		GT_SDRAM_B0_EXTPAR_MSK
+
+#define GT_SDRAM_B0_BLEN_SHF		13
+#define GT_SDRAM_B0_BLEN_MSK		(MSK(1) << GT_SDRAM_B0_BLEN_SHF)
+#define GT_SDRAM_B0_BLEN_BIT		GT_SDRAM_B0_BLEN_MSK
+#define GT_SDRAM_B0_BLEN_8		0
+#define GT_SDRAM_B0_BLEN_4		1
+
+
+#define GT_SDRAM_CFG_REFINT_SHF		0
+#define GT_SDRAM_CFG_REFINT_MSK		(MSK(14) << GT_SDRAM_CFG_REFINT_SHF)
+
+#define GT_SDRAM_CFG_NINTERLEAVE_SHF	14
+#define GT_SDRAM_CFG_NINTERLEAVE_MSK	(MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF)
+#define GT_SDRAM_CFG_NINTERLEAVE_BIT	GT_SDRAM_CFG_NINTERLEAVE_MSK
+
+#define GT_SDRAM_CFG_RMW_SHF		15
+#define GT_SDRAM_CFG_RMW_MSK		(MSK(1) << GT_SDRAM_CFG_RMW_SHF)
+#define GT_SDRAM_CFG_RMW_BIT		GT_SDRAM_CFG_RMW_MSK
+
+#define GT_SDRAM_CFG_NONSTAGREF_SHF	16
+#define GT_SDRAM_CFG_NONSTAGREF_MSK	(MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF)
+#define GT_SDRAM_CFG_NONSTAGREF_BIT	GT_SDRAM_CFG_NONSTAGREF_MSK
+
+#define GT_SDRAM_CFG_DUPCNTL_SHF	19
+#define GT_SDRAM_CFG_DUPCNTL_MSK	(MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF)
+#define GT_SDRAM_CFG_DUPCNTL_BIT	GT_SDRAM_CFG_DUPCNTL_MSK
+
+#define GT_SDRAM_CFG_DUPBA_SHF		20
+#define GT_SDRAM_CFG_DUPBA_MSK		(MSK(1) << GT_SDRAM_CFG_DUPBA_SHF)
+#define GT_SDRAM_CFG_DUPBA_BIT		GT_SDRAM_CFG_DUPBA_MSK
+
+#define GT_SDRAM_CFG_DUPEOT0_SHF	21
+#define GT_SDRAM_CFG_DUPEOT0_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF)
+#define GT_SDRAM_CFG_DUPEOT0_BIT	GT_SDRAM_CFG_DUPEOT0_MSK
+
+#define GT_SDRAM_CFG_DUPEOT1_SHF	22
+#define GT_SDRAM_CFG_DUPEOT1_MSK	(MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF)
+#define GT_SDRAM_CFG_DUPEOT1_BIT	GT_SDRAM_CFG_DUPEOT1_MSK
+
+#define GT_SDRAM_OPMODE_OP_SHF		0
+#define GT_SDRAM_OPMODE_OP_MSK		(MSK(3) << GT_SDRAM_OPMODE_OP_SHF)
+#define GT_SDRAM_OPMODE_OP_NORMAL	0
+#define GT_SDRAM_OPMODE_OP_NOP		1
+#define GT_SDRAM_OPMODE_OP_PRCHG	2
+#define GT_SDRAM_OPMODE_OP_MODE		3
+#define GT_SDRAM_OPMODE_OP_CBR		4
+
+#define GT_TC_CONTROL_ENTC0_SHF		0
+#define GT_TC_CONTROL_ENTC0_MSK		(MSK(1) << GT_TC_CONTROL_ENTC0_SHF)
+#define GT_TC_CONTROL_ENTC0_BIT		GT_TC_CONTROL_ENTC0_MSK
+#define GT_TC_CONTROL_SELTC0_SHF	1
+#define GT_TC_CONTROL_SELTC0_MSK	(MSK(1) << GT_TC_CONTROL_SELTC0_SHF)
+#define GT_TC_CONTROL_SELTC0_BIT	GT_TC_CONTROL_SELTC0_MSK
+
+
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF	0
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT	GT_PCI0_BARE_SWSCS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_SWSCS32DIS_SHF	1
+#define GT_PCI0_BARE_SWSCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF)
+#define GT_PCI0_BARE_SWSCS32DIS_BIT	GT_PCI0_BARE_SWSCS32DIS_MSK
+
+#define GT_PCI0_BARE_SWSCS10DIS_SHF	2
+#define GT_PCI0_BARE_SWSCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF)
+#define GT_PCI0_BARE_SWSCS10DIS_BIT	GT_PCI0_BARE_SWSCS10DIS_MSK
+
+#define GT_PCI0_BARE_INTIODIS_SHF	3
+#define GT_PCI0_BARE_INTIODIS_MSK	(MSK(1) << GT_PCI0_BARE_INTIODIS_SHF)
+#define GT_PCI0_BARE_INTIODIS_BIT	GT_PCI0_BARE_INTIODIS_MSK
+
+#define GT_PCI0_BARE_INTMEMDIS_SHF	4
+#define GT_PCI0_BARE_INTMEMDIS_MSK	(MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF)
+#define GT_PCI0_BARE_INTMEMDIS_BIT	GT_PCI0_BARE_INTMEMDIS_MSK
+
+#define GT_PCI0_BARE_CS3BOOTDIS_SHF	5
+#define GT_PCI0_BARE_CS3BOOTDIS_MSK	(MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_CS3BOOTDIS_BIT	GT_PCI0_BARE_CS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_CS20DIS_SHF	6
+#define GT_PCI0_BARE_CS20DIS_MSK	(MSK(1) << GT_PCI0_BARE_CS20DIS_SHF)
+#define GT_PCI0_BARE_CS20DIS_BIT	GT_PCI0_BARE_CS20DIS_MSK
+
+#define GT_PCI0_BARE_SCS32DIS_SHF	7
+#define GT_PCI0_BARE_SCS32DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF)
+#define GT_PCI0_BARE_SCS32DIS_BIT	GT_PCI0_BARE_SCS32DIS_MSK
+
+#define GT_PCI0_BARE_SCS10DIS_SHF	8
+#define GT_PCI0_BARE_SCS10DIS_MSK	(MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF)
+#define GT_PCI0_BARE_SCS10DIS_BIT	GT_PCI0_BARE_SCS10DIS_MSK
+
+
+#define GT_INTRCAUSE_MASABORT0_SHF	18
+#define GT_INTRCAUSE_MASABORT0_MSK	(MSK(1) << GT_INTRCAUSE_MASABORT0_SHF)
+#define GT_INTRCAUSE_MASABORT0_BIT	GT_INTRCAUSE_MASABORT0_MSK
+
+#define GT_INTRCAUSE_TARABORT0_SHF	19
+#define GT_INTRCAUSE_TARABORT0_MSK	(MSK(1) << GT_INTRCAUSE_TARABORT0_SHF)
+#define GT_INTRCAUSE_TARABORT0_BIT	GT_INTRCAUSE_TARABORT0_MSK
+
+
+#define GT_PCI0_CFGADDR_REGNUM_SHF	2
+#define GT_PCI0_CFGADDR_REGNUM_MSK	(MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
+#define GT_PCI0_CFGADDR_FUNCTNUM_SHF	8
+#define GT_PCI0_CFGADDR_FUNCTNUM_MSK	(MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
+#define GT_PCI0_CFGADDR_DEVNUM_SHF	11
+#define GT_PCI0_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
+#define GT_PCI0_CFGADDR_BUSNUM_SHF	16
+#define GT_PCI0_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_SHF	31
+#define GT_PCI0_CFGADDR_CONFIGEN_MSK	(MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_BIT	GT_PCI0_CFGADDR_CONFIGEN_MSK
+
+#define GT_PCI0_CMD_MBYTESWAP_SHF	0
+#define GT_PCI0_CMD_MBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF)
+#define GT_PCI0_CMD_MBYTESWAP_BIT	GT_PCI0_CMD_MBYTESWAP_MSK
+#define GT_PCI0_CMD_MWORDSWAP_SHF	10
+#define GT_PCI0_CMD_MWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF)
+#define GT_PCI0_CMD_MWORDSWAP_BIT	GT_PCI0_CMD_MWORDSWAP_MSK
+#define GT_PCI0_CMD_SBYTESWAP_SHF	16
+#define GT_PCI0_CMD_SBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF)
+#define GT_PCI0_CMD_SBYTESWAP_BIT	GT_PCI0_CMD_SBYTESWAP_MSK
+#define GT_PCI0_CMD_SWORDSWAP_SHF	11
+#define GT_PCI0_CMD_SWORDSWAP_MSK	(MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF)
+#define GT_PCI0_CMD_SWORDSWAP_BIT	GT_PCI0_CMD_SWORDSWAP_MSK
+
+#define GT_INTR_T0EXP_SHF		8
+#define GT_INTR_T0EXP_MSK		(MSK(1) << GT_INTR_T0EXP_SHF)
+#define GT_INTR_T0EXP_BIT		GT_INTR_T0EXP_MSK
+#define GT_INTR_RETRYCTR0_SHF		20
+#define GT_INTR_RETRYCTR0_MSK		(MSK(1) << GT_INTR_RETRYCTR0_SHF)
+#define GT_INTR_RETRYCTR0_BIT		GT_INTR_RETRYCTR0_MSK
+
+/*
+ *  Misc
+ */
+#define GT_DEF_PCI0_IO_BASE	0x10000000UL
+#define GT_DEF_PCI0_IO_SIZE	0x02000000UL
+#define GT_DEF_PCI0_MEM0_BASE	0x12000000UL
+#define GT_DEF_PCI0_MEM0_SIZE	0x02000000UL
+#define GT_DEF_BASE		0x14000000UL
+
+#define GT_MAX_BANKSIZE		(256 * 1024 * 1024)	/* Max 256MB bank  */
+#define GT_LATTIM_MIN		6			/* Minimum lat  */
+
+/*
+ * The gt64120_dep.h file must define the following macros
+ *
+ *   GT_READ(ofs, data_pointer)
+ *   GT_WRITE(ofs, data)           - read/write GT64120 registers in 32bit
+ *
+ *   TIMER 	- gt64120 timer irq, temporary solution until
+ *		  full gt64120 cascade interrupt support is in place
+ */
+
+#include <mach-gt64120.h>
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.  We also provide non-swapping versions.
+ */
+#define __GT_READ(ofs)							\
+	(*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs)		le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data)	__GT_WRITE(ofs, cpu_to_le32(data))
+
+extern void gt641xx_set_base_clock(unsigned int clock);
+extern int gt641xx_timer0_state(void);
+
+#endif /* _ASM_GT64120_H */
diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h
new file mode 100644
index 0000000..90bf399
--- /dev/null
+++ b/arch/mips/include/asm/hardirq.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
new file mode 100644
index 0000000..2de638f
--- /dev/null
+++ b/arch/mips/include/asm/hazards.h
@@ -0,0 +1,271 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef _ASM_HAZARDS_H
+#define _ASM_HAZARDS_H
+
+#ifdef __ASSEMBLY__
+#define ASMMACRO(name, code...) .macro name; code; .endm
+#else
+
+#include <asm/cpu-features.h>
+
+#define ASMMACRO(name, code...)						\
+__asm__(".macro " #name "; " #code "; .endm");				\
+									\
+static inline void name(void)						\
+{									\
+	__asm__ __volatile__ (#name);					\
+}
+
+/*
+ * MIPS R2 instruction hazard barrier.   Needs to be called as a subroutine.
+ */
+extern void mips_ihb(void);
+
+#endif
+
+ASMMACRO(_ssnop,
+	 sll	$0, $0, 1
+	)
+
+ASMMACRO(_ehb,
+	 sll	$0, $0, 3
+	)
+
+/*
+ * TLB hazards
+ */
+#if defined(CONFIG_CPU_MIPSR2)
+
+/*
+ * MIPSR2 defines ehb for hazard avoidance
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	 _ehb
+	)
+ASMMACRO(tlbw_use_hazard,
+	 _ehb
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ehb
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ehb
+	)
+ASMMACRO(irq_disable_hazard,
+	_ehb
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ehb
+	)
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.  Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	mips64r2				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	mips0					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#elif defined(CONFIG_CPU_MIPSR1)
+
+/*
+ * These are slightly complicated by the fact that we guarantee R1 kernels to
+ * run fine on R2 processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	_ssnop; _ssnop; _ehb
+	)
+ASMMACRO(tlbw_use_hazard,
+	_ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(irq_disable_hazard,
+	_ssnop; _ssnop; _ssnop; _ehb
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ssnop; _ssnop; _ssnop; _ehb
+	)
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler.  Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define __instruction_hazard()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	mips64r2				\n"	\
+	"	dla	%0, 1f					\n"	\
+	"	jr.hb	%0					\n"	\
+	"	.set	mips0					\n"	\
+	"1:							\n"	\
+	: "=r" (tmp));							\
+} while (0)
+
+#define instruction_hazard()						\
+do {									\
+	if (cpu_has_mips_r2)						\
+		__instruction_hazard();					\
+} while (0)
+
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	)
+ASMMACRO(tlbw_use_hazard,
+	)
+ASMMACRO(tlb_probe_hazard,
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+/*
+ * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(tlbw_use_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(tlb_probe_hazard,
+	 _ssnop; _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_SB1)
+
+/*
+ * Mostly like R4000 for historic reasons
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	)
+ASMMACRO(tlbw_use_hazard,
+	)
+ASMMACRO(tlb_probe_hazard,
+	)
+ASMMACRO(irq_enable_hazard,
+	)
+ASMMACRO(irq_disable_hazard,
+	 _ssnop; _ssnop; _ssnop
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	)
+#define instruction_hazard() do { } while (0)
+
+#else
+
+/*
+ * Finally the catchall case for all other processors including R4000, R4400,
+ * R4600, R4700, R5000, RM7000, NEC VR41xx etc.
+ *
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400.  Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+	nop; nop
+	)
+ASMMACRO(tlbw_use_hazard,
+	nop; nop; nop
+	)
+ASMMACRO(tlb_probe_hazard,
+	 nop; nop; nop
+	)
+ASMMACRO(irq_enable_hazard,
+	 _ssnop; _ssnop; _ssnop;
+	)
+ASMMACRO(irq_disable_hazard,
+	nop; nop; nop
+	)
+ASMMACRO(back_to_back_c0_hazard,
+	 _ssnop; _ssnop; _ssnop;
+	)
+#define instruction_hazard() do { } while (0)
+
+#endif
+
+
+/* FPU hazards */
+
+#if defined(CONFIG_CPU_SB1)
+ASMMACRO(enable_fpu_hazard,
+	 .set	push;
+	 .set	mips64;
+	 .set	noreorder;
+	 _ssnop;
+	 bnezl	$0, .+4;
+	 _ssnop;
+	 .set	pop
+)
+ASMMACRO(disable_fpu_hazard,
+)
+
+#elif defined(CONFIG_CPU_MIPSR2)
+ASMMACRO(enable_fpu_hazard,
+	 _ehb
+)
+ASMMACRO(disable_fpu_hazard,
+	 _ehb
+)
+#else
+ASMMACRO(enable_fpu_hazard,
+	 nop; nop; nop; nop
+)
+ASMMACRO(disable_fpu_hazard,
+	 _ehb
+)
+#endif
+
+#endif /* _ASM_HAZARDS_H */
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
new file mode 100644
index 0000000..4374ab2
--- /dev/null
+++ b/arch/mips/include/asm/highmem.h
@@ -0,0 +1,67 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/kmap_types.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void * kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *__kmap(struct page *page);
+extern void __kunmap(struct page *page);
+extern void *__kmap_atomic(struct page *page, enum km_type type);
+extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *__kmap_atomic_to_page(void *ptr);
+
+#define kmap			__kmap
+#define kunmap			__kunmap
+#define kmap_atomic		__kmap_atomic
+#define kunmap_atomic		__kunmap_atomic
+#define kmap_atomic_to_page	__kmap_atomic_to_page
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h
new file mode 100644
index 0000000..aca05a4
--- /dev/null
+++ b/arch/mips/include/asm/hw_irq.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2001, 2002 by Ralf Baechle
+ */
+#ifndef __ASM_HW_IRQ_H
+#define __ASM_HW_IRQ_H
+
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+/*
+ * interrupt-retrigger: NOP for now. This may not be apropriate for all
+ * machines, we'll see ...
+ */
+
+#endif /* __ASM_HW_IRQ_H */
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
new file mode 100644
index 0000000..5dabc87
--- /dev/null
+++ b/arch/mips/include/asm/i8253.h
@@ -0,0 +1,21 @@
+/*
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef __ASM_I8253_H
+#define __ASM_I8253_H
+
+#include <linux/spinlock.h>
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+#define PIT_TICK_RATE		1193182UL
+
+extern spinlock_t i8253_lock;
+
+extern void setup_pit_timer(void);
+
+#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
new file mode 100644
index 0000000..8572a2d
--- /dev/null
+++ b/arch/mips/include/asm/i8259.h
@@ -0,0 +1,86 @@
+/*
+ *	include/asm-mips/i8259.h
+ *
+ *	i8259A interrupt definitions.
+ *
+ *	Copyright (C) 2003  Maciej W. Rozycki
+ *	Copyright (C) 2003  Ralf Baechle <ralf@linux-mips.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_I8259_H
+#define _ASM_I8259_H
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <irq.h>
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+extern spinlock_t i8259A_lock;
+
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+
+extern void init_i8259_irqs(void);
+
+/*
+ * Do the traditional i8259 interrupt polling thing.  This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int i8259_irq(void)
+{
+	int irq;
+
+	spin_lock(&i8259A_lock);
+
+	/* Perform an interrupt acknowledge cycle on controller 1. */
+	outb(0x0C, PIC_MASTER_CMD);		/* prepare for poll */
+	irq = inb(PIC_MASTER_CMD) & 7;
+	if (irq == PIC_CASCADE_IR) {
+		/*
+		 * Interrupt is cascaded so perform interrupt
+		 * acknowledge on controller 2.
+		 */
+		outb(0x0C, PIC_SLAVE_CMD);		/* prepare for poll */
+		irq = (inb(PIC_SLAVE_CMD) & 7) + 8;
+	}
+
+	if (unlikely(irq == 7)) {
+		/*
+		 * This may be a spurious interrupt.
+		 *
+		 * Read the interrupt status register (ISR). If the most
+		 * significant bit is not set then there is no valid
+		 * interrupt.
+		 */
+		outb(0x0B, PIC_MASTER_ISR);		/* ISR register */
+		if(~inb(PIC_MASTER_ISR) & 0x80)
+			irq = -1;
+	}
+
+	spin_unlock(&i8259A_lock);
+
+	return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
+}
+
+#endif /* _ASM_I8259_H */
diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h
new file mode 100644
index 0000000..bb674c3
--- /dev/null
+++ b/arch/mips/include/asm/ide.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains the MIPS architecture specific IDE code.
+ */
+#ifndef __ASM_IDE_H
+#define __ASM_IDE_H
+
+#include <ide.h>
+
+#endif /* __ASM_IDE_H */
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
new file mode 100644
index 0000000..6489f00
--- /dev/null
+++ b/arch/mips/include/asm/inst.h
@@ -0,0 +1,394 @@
+/*
+ * Format of an instruction in memory.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
+ */
+#ifndef _ASM_INST_H
+#define _ASM_INST_H
+
+/*
+ * Major opcodes; before MIPS IV cop1x was called cop3.
+ */
+enum major_op {
+	spec_op, bcond_op, j_op, jal_op,
+	beq_op, bne_op, blez_op, bgtz_op,
+	addi_op, addiu_op, slti_op, sltiu_op,
+	andi_op, ori_op, xori_op, lui_op,
+	cop0_op, cop1_op, cop2_op, cop1x_op,
+	beql_op, bnel_op, blezl_op, bgtzl_op,
+	daddi_op, daddiu_op, ldl_op, ldr_op,
+	spec2_op, jalx_op, mdmx_op, spec3_op,
+	lb_op, lh_op, lwl_op, lw_op,
+	lbu_op, lhu_op, lwr_op, lwu_op,
+	sb_op, sh_op, swl_op, sw_op,
+	sdl_op, sdr_op, swr_op, cache_op,
+	ll_op, lwc1_op, lwc2_op, pref_op,
+	lld_op, ldc1_op, ldc2_op, ld_op,
+	sc_op, swc1_op, swc2_op, major_3b_op,
+	scd_op, sdc1_op, sdc2_op, sd_op
+};
+
+/*
+ * func field of spec opcode.
+ */
+enum spec_op {
+	sll_op, movc_op, srl_op, sra_op,
+	sllv_op, pmon_op, srlv_op, srav_op,
+	jr_op, jalr_op, movz_op, movn_op,
+	syscall_op, break_op, spim_op, sync_op,
+	mfhi_op, mthi_op, mflo_op, mtlo_op,
+	dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
+	mult_op, multu_op, div_op, divu_op,
+	dmult_op, dmultu_op, ddiv_op, ddivu_op,
+	add_op, addu_op, sub_op, subu_op,
+	and_op, or_op, xor_op, nor_op,
+	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
+	dadd_op, daddu_op, dsub_op, dsubu_op,
+	tge_op, tgeu_op, tlt_op, tltu_op,
+	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
+	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
+	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+};
+
+/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+	madd_op, maddu_op, mul_op, spec2_3_unused_op,
+	msub_op, msubu_op, /* more unused ops */
+	clz_op = 0x20, clo_op,
+	dclz_op = 0x24, dclo_op,
+	sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+	ext_op, dextm_op, dextu_op, dext_op,
+	ins_op, dinsm_op, dinsu_op, dins_op,
+	bshfl_op = 0x20,
+	dbshfl_op = 0x24,
+	rdhwr_op = 0x3b
+};
+
+/*
+ * rt field of bcond opcodes.
+ */
+enum rt_op {
+	bltz_op, bgez_op, bltzl_op, bgezl_op,
+	spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
+	tgei_op, tgeiu_op, tlti_op, tltiu_op,
+	teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
+	bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+	rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+	rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+	bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
+};
+
+/*
+ * rs field of cop opcodes.
+ */
+enum cop_op {
+	mfc_op        = 0x00, dmfc_op       = 0x01,
+	cfc_op        = 0x02, mtc_op        = 0x04,
+	dmtc_op       = 0x05, ctc_op        = 0x06,
+	bc_op         = 0x08, cop_op        = 0x10,
+	copm_op       = 0x18
+};
+
+/*
+ * rt field of cop.bc_op opcodes
+ */
+enum bcop_op {
+	bcf_op, bct_op, bcfl_op, bctl_op
+};
+
+/*
+ * func field of cop0 coi opcodes.
+ */
+enum cop0_coi_func {
+	tlbr_op       = 0x01, tlbwi_op      = 0x02,
+	tlbwr_op      = 0x06, tlbp_op       = 0x08,
+	rfe_op        = 0x10, eret_op       = 0x18
+};
+
+/*
+ * func field of cop0 com opcodes.
+ */
+enum cop0_com_func {
+	tlbr1_op      = 0x01, tlbw_op       = 0x02,
+	tlbp1_op      = 0x08, dctr_op       = 0x09,
+	dctw_op       = 0x0a
+};
+
+/*
+ * fmt field of cop1 opcodes.
+ */
+enum cop1_fmt {
+	s_fmt, d_fmt, e_fmt, q_fmt,
+	w_fmt, l_fmt
+};
+
+/*
+ * func field of cop1 instructions using d, s or w format.
+ */
+enum cop1_sdw_func {
+	fadd_op      =  0x00, fsub_op      =  0x01,
+	fmul_op      =  0x02, fdiv_op      =  0x03,
+	fsqrt_op     =  0x04, fabs_op      =  0x05,
+	fmov_op      =  0x06, fneg_op      =  0x07,
+	froundl_op   =  0x08, ftruncl_op   =  0x09,
+	fceill_op    =  0x0a, ffloorl_op   =  0x0b,
+	fround_op    =  0x0c, ftrunc_op    =  0x0d,
+	fceil_op     =  0x0e, ffloor_op    =  0x0f,
+	fmovc_op     =  0x11, fmovz_op     =  0x12,
+	fmovn_op     =  0x13, frecip_op    =  0x15,
+	frsqrt_op    =  0x16, fcvts_op     =  0x20,
+	fcvtd_op     =  0x21, fcvte_op     =  0x22,
+	fcvtw_op     =  0x24, fcvtl_op     =  0x25,
+	fcmp_op      =  0x30
+};
+
+/*
+ * func field of cop1x opcodes (MIPS IV).
+ */
+enum cop1x_func {
+	lwxc1_op     =  0x00, ldxc1_op     =  0x01,
+	pfetch_op    =  0x07, swxc1_op     =  0x08,
+	sdxc1_op     =  0x09, madd_s_op    =  0x20,
+	madd_d_op    =  0x21, madd_e_op    =  0x22,
+	msub_s_op    =  0x28, msub_d_op    =  0x29,
+	msub_e_op    =  0x2a, nmadd_s_op   =  0x30,
+	nmadd_d_op   =  0x31, nmadd_e_op   =  0x32,
+	nmsub_s_op   =  0x38, nmsub_d_op   =  0x39,
+	nmsub_e_op   =  0x3a
+};
+
+/*
+ * func field for mad opcodes (MIPS IV).
+ */
+enum mad_func {
+	madd_fp_op      = 0x08, msub_fp_op      = 0x0a,
+	nmadd_fp_op     = 0x0c, nmsub_fp_op     = 0x0e
+};
+
+/*
+ * Damn ...  bitfields depend from byteorder :-(
+ */
+#ifdef __MIPSEB__
+struct j_format {	/* Jump format */
+	unsigned int opcode : 6;
+	unsigned int target : 26;
+};
+
+struct i_format {	/* Immediate format (addi, lw, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	signed int simmediate : 16;
+};
+
+struct u_format {	/* Unsigned immediate format (ori, xori, ...) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int uimmediate : 16;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int c_op : 3;
+	unsigned int cache : 2;
+	unsigned int simmediate : 16;
+};
+
+struct r_format {	/* Register format */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int opcode : 6;
+	unsigned int rs : 5;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int opcode : 6;
+	unsigned int : 1;
+	unsigned int fmt : 4;
+	unsigned int rt : 5;
+	unsigned int rd : 5;
+	unsigned int re : 5;
+	unsigned int func : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int opcode : 6;
+	unsigned int fr : 5;
+	unsigned int ft : 5;
+	unsigned int fs : 5;
+	unsigned int fd : 5;
+	unsigned int func : 4;
+	unsigned int fmt : 2;
+};
+
+#elif defined(__MIPSEL__)
+
+struct j_format {	/* Jump format */
+	unsigned int target : 26;
+	unsigned int opcode : 6;
+};
+
+struct i_format {	/* Immediate format */
+	signed int simmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct u_format {	/* Unsigned immediate format */
+	unsigned int uimmediate : 16;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct c_format {	/* Cache (>= R6000) format */
+	unsigned int simmediate : 16;
+	unsigned int cache : 2;
+	unsigned int c_op : 3;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct r_format {	/* Register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct p_format {	/* Performance counter format (R10000) */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int rs : 5;
+	unsigned int opcode : 6;
+};
+
+struct f_format {	/* FPU register format */
+	unsigned int func : 6;
+	unsigned int re : 5;
+	unsigned int rd : 5;
+	unsigned int rt : 5;
+	unsigned int fmt : 4;
+	unsigned int : 1;
+	unsigned int opcode : 6;
+};
+
+struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+	unsigned int fmt : 2;
+	unsigned int func : 4;
+	unsigned int fd : 5;
+	unsigned int fs : 5;
+	unsigned int ft : 5;
+	unsigned int fr : 5;
+	unsigned int opcode : 6;
+};
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+union mips_instruction {
+	unsigned int word;
+	unsigned short halfword[2];
+	unsigned char byte[4];
+	struct j_format j_format;
+	struct i_format i_format;
+	struct u_format u_format;
+	struct c_format c_format;
+	struct r_format r_format;
+	struct f_format f_format;
+        struct ma_format ma_format;
+};
+
+/* HACHACHAHCAHC ...  */
+
+/* In case some other massaging is needed, keep MIPSInst as wrapper */
+
+#define MIPSInst(x) x
+
+#define I_OPCODE_SFT	26
+#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT)
+
+#define I_JTARGET_SFT	0
+#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff)
+
+#define I_RS_SFT	21
+#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT)
+
+#define I_RT_SFT	16
+#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT)
+
+#define I_IMM_SFT	0
+#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff)))
+#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff)
+
+#define I_CACHEOP_SFT	18
+#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT)
+
+#define I_CACHESEL_SFT	16
+#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT)
+
+#define I_RD_SFT	11
+#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT)
+
+#define I_RE_SFT	6
+#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT)
+
+#define I_FUNC_SFT	0
+#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
+
+#define I_FFMT_SFT	21
+#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT)
+
+#define I_FT_SFT	16
+#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT)
+
+#define I_FS_SFT	11
+#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT)
+
+#define I_FD_SFT	6
+#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT)
+
+#define I_FR_SFT	21
+#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT)
+
+#define I_FMA_FUNC_SFT	2
+#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT)
+
+#define I_FMA_FFMT_SFT	0
+#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003)
+
+typedef unsigned int mips_instruction;
+
+#endif /* _ASM_INST_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
new file mode 100644
index 0000000..501a40b
--- /dev/null
+++ b/arch/mips/include/asm/io.h
@@ -0,0 +1,589 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf GmbH
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	Maciej W. Rozycki <macro@mips.com>
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm-generic/iomap.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/processor.h>
+#include <asm/string.h>
+
+#include <ioremap.h>
+#include <mangle-port.h>
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * Raw operations are never swapped in software.  OTOH values that raw
+ * operations are working on may or may not have been swapped by the bus
+ * hardware.  An example use would be for flash memory that's used for
+ * execute in place.
+ */
+# define __raw_ioswabb(a, x)	(x)
+# define __raw_ioswabw(a, x)	(x)
+# define __raw_ioswabl(a, x)	(x)
+# define __raw_ioswabq(a, x)	(x)
+# define ____raw_ioswabq(a, x)	(x)
+
+/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * On MIPS I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. mips_io_port_base is the virtual address to
+ * which all ports are being mapped.  For sake of efficiency some code
+ * assumes that this is an address that can be loaded with a single lui
+ * instruction, so the lower 16 bits must be zero.  Should be true on
+ * on any sane architecture; generic code does not use this assumption.
+ */
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ *
+ */
+
+#define __SLOW_DOWN_IO \
+	__asm__ __volatile__( \
+		"sb\t$0,0x80(%0)" \
+		: : "r" (mips_io_port_base));
+
+#ifdef CONF_SLOWDOWN_IO
+#ifdef REALLY_SLOW_IO
+#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+#else
+#define SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+#else
+#define SLOW_DOWN_IO
+#endif
+
+/*
+ *     virt_to_phys    -       map virtual addresses to physical
+ *     @address: address to remap
+ *
+ *     The returned physical address is the physical (CPU) mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses directly mapped or allocated via kmalloc.
+ *
+ *     This function does not give bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline unsigned long virt_to_phys(volatile const void *address)
+{
+	return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+/*
+ *     phys_to_virt    -       map physical address to virtual
+ *     @address: address to remap
+ *
+ *     The returned virtual address is a current CPU mapping for
+ *     the memory address given. It is only valid to use this function on
+ *     addresses that have a kernel mapping
+ *
+ *     This function does not handle bus mappings for DMA transfers. In
+ *     almost all conceivable cases a device driver should not be using
+ *     this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
+}
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+static inline unsigned long isa_virt_to_bus(volatile void * address)
+{
+	return (unsigned long)address - PAGE_OFFSET;
+}
+
+static inline void * isa_bus_to_virt(unsigned long address)
+{
+	return (void *)(address + PAGE_OFFSET);
+}
+
+#define isa_page_to_bus page_to_phys
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them for x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iounmap(const volatile void __iomem *addr);
+
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	void __iomem *addr = plat_ioremap(offset, size, flags);
+
+	if (addr)
+		return addr;
+
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
+	if (cpu_has_64bit_addresses) {
+		u64 base = UNCAC_BASE;
+
+		/*
+		 * R10000 supports a 2 bit uncached attribute therefore
+		 * UNCAC_BASE may not equal IO_BASE.
+		 */
+		if (flags == _CACHE_UNCACHED)
+			base = (u64) IO_BASE;
+		return (void __iomem *) (unsigned long) (base + offset);
+	} else if (__builtin_constant_p(offset) &&
+		   __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+		phys_t phys_addr, last_addr;
+
+		phys_addr = fixup_bigphys_addr(offset, size);
+
+		/* Don't allow wraparound or zero size. */
+		last_addr = phys_addr + size - 1;
+		if (!size || last_addr < phys_addr)
+			return NULL;
+
+		/*
+		 * Map uncached objects in the low 512MB of address
+		 * space using KSEG1.
+		 */
+		if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+		    flags == _CACHE_UNCACHED)
+			return (void __iomem *)
+				(unsigned long)CKSEG1ADDR(phys_addr);
+	}
+
+	return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
+}
+
+/*
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+#define ioremap(offset, size)						\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_nocache     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In paticular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ */
+#define ioremap_nocache(offset, size)					\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_cachable -   map bus memory into CPU space
+ * @offset:         bus address of the memory
+ * @size:           size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU.  Also enables full write-combining.  Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size)					\
+	__ioremap_mode((offset), (size), _page_cachable_default)
+
+/*
+ * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
+ * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * mapping using the uncached accelerated mode which isn't supported on
+ * all processors.
+ */
+#define ioremap_cacheable_cow(offset, size)				\
+	__ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+#define ioremap_uncached_accelerated(offset, size)			\
+	__ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
+
+static inline void iounmap(const volatile void __iomem *addr)
+{
+	if (plat_iounmap(addr))
+		return;
+
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+	if (cpu_has_64bit_addresses ||
+	    (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
+		return;
+
+	__iounmap(addr);
+
+#undef __IS_KSEG1
+}
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
+									\
+static inline void pfx##write##bwlq(type val,				\
+				    volatile void __iomem *mem)		\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	__val = pfx##ioswab##bwlq(__mem, val);				\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		*__mem = __val;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+		type __tmp;						\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __writeq""\n\t"	\
+			"dsll32	%L0, %L0, 0"			"\n\t"	\
+			"dsrl32	%L0, %L0, 0"			"\n\t"	\
+			"dsll32	%M0, %M0, 0"			"\n\t"	\
+			"or	%L0, %L0, %M0"			"\n\t"	\
+			"sd	%L0, %2"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__tmp)					\
+			: "0" (__val), "m" (*__mem));			\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else								\
+		BUG();							\
+}									\
+									\
+static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
+{									\
+	volatile type *__mem;						\
+	type __val;							\
+									\
+	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
+									\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+		__val = *__mem;						\
+	else if (cpu_has_64bits) {					\
+		unsigned long __flags;					\
+									\
+		if (irq)						\
+			local_irq_save(__flags);			\
+		__asm__ __volatile__(					\
+			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			"ld	%L0, %1"			"\n\t"	\
+			"dsra32	%M0, %L0, 0"			"\n\t"	\
+			"sll	%L0, %L0, 0"			"\n\t"	\
+			".set	mips0"				"\n"	\
+			: "=r" (__val)					\
+			: "m" (*__mem));				\
+		if (irq)						\
+			local_irq_restore(__flags);			\
+	} else {							\
+		__val = 0;						\
+		BUG();							\
+	}								\
+									\
+	return pfx##ioswab##bwlq(__mem, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	__val = pfx##ioswab##bwlq(__addr, val);				\
+									\
+	/* Really, we want this to be atomic */				\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwlq(__addr, __val);			\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwlq, type)				\
+									\
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+
+#define BUILDIO_MEM(bwlq, type)						\
+									\
+__BUILD_MEMORY_PFX(__raw_, bwlq, type)					\
+__BUILD_MEMORY_PFX(, bwlq, type)					\
+__BUILD_MEMORY_PFX(__mem_, bwlq, type)					\
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)				\
+	__BUILD_IOPORT_PFX(__mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
+
+#define __BUILDIO(bwlq, type)						\
+									\
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
+
+__BUILDIO(q, u64)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+#define readq_relaxed			readq
+
+/*
+ * Some code tests for these symbols
+ */
+#define readq				readq
+#define writeq				writeq
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__mem_out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __mem_in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+#define BUILDSTRING(bwlq, type)						\
+									\
+__BUILD_MEMORY_STRING(bwlq, type)					\
+__BUILD_IOPORT_STRING(bwlq, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
+BUILDSTRING(q, u64)
+#endif
+
+
+/* Depends on MIPS II instruction set */
+#define mmiowb() asm volatile ("sync" ::: "memory")
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software.  There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ *  - dma_cache_wback_inv(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_wback(start, size) makes caches and coherent by
+ *    writing the content of the caches back to memory, if necessary.
+ *    The function also invalidates the affected part of the caches as
+ *    necessary before DMA transfers from outside to memory.
+ *  - dma_cache_inv(start, size) invalidates the affected parts of the
+ *    caches.  Dirty lines of the caches may be written back or simply
+ *    be discarded.  This operation is necessary before dma operations
+ *    to the memory.
+ *
+ * This API used to be exported; it now is for arch code internal use only.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+
+extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+#define dma_cache_wback_inv(start, size)	_dma_cache_wback_inv(start, size)
+#define dma_cache_wback(start, size)		_dma_cache_wback(start, size)
+#define dma_cache_inv(start, size)		_dma_cache_inv(start, size)
+
+#else /* Sane hardware */
+
+#define dma_cache_wback_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_wback(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+#define dma_cache_inv(start,size)	\
+	do { (void) (start); (void) (size); } while (0)
+
+#endif /* CONFIG_DMA_NONCOHERENT */
+
+/*
+ * Read a 32-bit register that requires a 64-bit read cycle on the bus.
+ * Avoid interrupt mucking, just adjust the address for 4-byte access.
+ * Assume the addresses are 8-byte aligned.
+ */
+#ifdef __MIPSEB__
+#define __CSR_32_ADJUST 4
+#else
+#define __CSR_32_ADJUST 0
+#endif
+
+#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
+#define csr_in32(a)    (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* _ASM_IO_H */
diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h
new file mode 100644
index 0000000..85067e2
--- /dev/null
+++ b/arch/mips/include/asm/ioctl.h
@@ -0,0 +1,94 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle
+ */
+#ifndef _ASM_IOCTL_H
+#define _ASM_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned.  Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ *
+ * The same applies for for the MIPS ABI; in fact even the macros
+ * from Linux/Alpha fit almost perfectly.
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+/*
+ * The following are included for compatibility
+ */
+#define _IOC_VOID	0x20000000
+#define _IOC_OUT	0x40000000
+#define _IOC_IN		0x80000000
+#define _IOC_INOUT	(IOC_IN|IOC_OUT)
+
+#define _IOC(dir, type, nr, size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type, nr)		_IOC(_IOC_NONE, (type), (nr), 0)
+#define _IOR(type, nr, size)	_IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOW(type, nr, size)	_IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOWR(type, nr, size)	_IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type, nr, size)	_IOC(_IOC_READ, (type), (nr), sizeof(size))
+#define _IOW_BAD(type, nr, size)	_IOC(_IOC_WRITE, (type), (nr), sizeof(size))
+#define _IOWR_BAD(type, nr, size)	_IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size))
+
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IOCTL_H */
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
new file mode 100644
index 0000000..3f04a99
--- /dev/null
+++ b/arch/mips/include/asm/ioctls.h
@@ -0,0 +1,109 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2001 Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_IOCTLS_H
+#define __ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define TCGETA		0x5401
+#define TCSETA		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETAW		0x5403
+#define TCSETAF		0x5404
+
+#define TCSBRK		0x5405
+#define TCXONC		0x5406
+#define TCFLSH		0x5407
+
+#define TCGETS		0x540d
+#define TCSETS		0x540e
+#define TCSETSW		0x540f
+#define TCSETSF		0x5410
+
+#define TIOCEXCL	0x740d		/* set exclusive use of tty */
+#define TIOCNXCL	0x740e		/* reset exclusive use of tty */
+#define TIOCOUTQ	0x7472		/* output queue size */
+#define TIOCSTI		0x5472		/* simulate terminal input */
+#define TIOCMGET	0x741d		/* get all modem bits */
+#define TIOCMBIS	0x741b		/* bis modem bits */
+#define TIOCMBIC	0x741c		/* bic modem bits */
+#define TIOCMSET	0x741a		/* set all modem bits */
+#define TIOCPKT		0x5470		/* pty: set/clear packet mode */
+#define	 TIOCPKT_DATA		0x00	/* data packet */
+#define	 TIOCPKT_FLUSHREAD	0x01	/* flush packet */
+#define	 TIOCPKT_FLUSHWRITE	0x02	/* flush packet */
+#define	 TIOCPKT_STOP		0x04	/* stop output */
+#define	 TIOCPKT_START		0x08	/* start output */
+#define	 TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
+#define	 TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
+/* #define  TIOCPKT_IOCTL		0x40	state change of pty driver */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
+#define TIOCNOTTY	0x5471		/* void tty association */
+#define TIOCSETD	0x7401
+#define TIOCGETD	0x7400
+
+#define FIOCLEX		0x6601
+#define FIONCLEX	0x6602
+#define FIOASYNC	0x667d
+#define FIONBIO		0x667e
+#define FIOQSIZE	0x667f
+
+#define TIOCGLTC	0x7474			/* get special local chars */
+#define TIOCSLTC	0x7475			/* set special local chars */
+#define TIOCSPGRP	_IOW('t', 118, int)	/* set pgrp of tty */
+#define TIOCGPGRP	_IOR('t', 119, int)	/* get pgrp of tty */
+#define TIOCCONS	_IOW('t', 120, int)	/* become virtual console */
+
+#define FIONREAD	0x467f
+#define TIOCINQ		FIONREAD
+
+#define TIOCGETP        0x7408
+#define TIOCSETP        0x7409
+#define TIOCSETN        0x740a			/* TIOCSETP wo flush */
+
+/* #define TIOCSETA	_IOW('t', 20, struct termios) set termios struct */
+/* #define TIOCSETAW	_IOW('t', 21, struct termios) drain output, set */
+/* #define TIOCSETAF	_IOW('t', 22, struct termios) drn out, fls in, set */
+/* #define TIOCGETD	_IOR('t', 26, int)	get line discipline */
+/* #define TIOCSETD	_IOW('t', 27, int)	set line discipline */
+						/* 127-124 compat */
+
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x7416  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+
+/* I hope the range from 0x5480 on is free ... */
+#define TIOCSCTTY	0x5480		/* become controlling tty */
+#define TIOCGSOFTCAR	0x5481
+#define TIOCSSOFTCAR	0x5482
+#define TIOCLINUX	0x5483
+#define TIOCGSERIAL	0x5484
+#define TIOCSSERIAL	0x5485
+#define TCSBRKP		0x5486	/* Needed for POSIX tcsendbreak() */
+#define TIOCSERCONFIG	0x5488
+#define TIOCSERGWILD	0x5489
+#define TIOCSERSWILD	0x548a
+#define TIOCGLCKTRMIOS	0x548b
+#define TIOCSLCKTRMIOS	0x548c
+#define TIOCSERGSTRUCT	0x548d /* For debugging only */
+#define TIOCSERGETLSR   0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config  */
+#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
+#define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP	0x5493 /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP	0x5494 /* Set Hayes ESP configuration */
+
+#endif /* __ASM_IOCTLS_H */
diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h
new file mode 100644
index 0000000..7c36b0e
--- /dev/null
+++ b/arch/mips/include/asm/ip32/crime.h
@@ -0,0 +1,158 @@
+/*
+ * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory
+ * Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_CRIME_H__
+#define __ASM_CRIME_H__
+
+/*
+ * Address map
+ */
+#define CRIME_BASE	0x14000000	/* physical */
+
+struct sgi_crime {
+	volatile unsigned long id;
+#define CRIME_ID_MASK			0xff
+#define CRIME_ID_IDBITS			0xf0
+#define CRIME_ID_IDVALUE		0xa0
+#define CRIME_ID_REV			0x0f
+#define CRIME_REV_PETTY			0x00
+#define CRIME_REV_11			0x11
+#define CRIME_REV_13			0x13
+#define CRIME_REV_14			0x14
+
+	volatile unsigned long control;
+#define CRIME_CONTROL_MASK		0x3fff
+#define CRIME_CONTROL_TRITON_SYSADC	0x2000
+#define CRIME_CONTROL_CRIME_SYSADC	0x1000
+#define CRIME_CONTROL_HARD_RESET	0x0800
+#define CRIME_CONTROL_SOFT_RESET	0x0400
+#define CRIME_CONTROL_DOG_ENA		0x0200
+#define CRIME_CONTROL_ENDIANESS		0x0100
+#define CRIME_CONTROL_ENDIAN_BIG	0x0100
+#define CRIME_CONTROL_ENDIAN_LITTLE	0x0000
+#define CRIME_CONTROL_CQUEUE_HWM	0x000f
+#define CRIME_CONTROL_CQUEUE_SHFT	0
+#define CRIME_CONTROL_WBUF_HWM		0x00f0
+#define CRIME_CONTROL_WBUF_SHFT		8
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+	volatile unsigned long soft_int;
+	volatile unsigned long hard_int;
+#define MACE_VID_IN1_INT		BIT(0)
+#define MACE_VID_IN2_INT		BIT(1)
+#define MACE_VID_OUT_INT		BIT(2)
+#define MACE_ETHERNET_INT		BIT(3)
+#define MACE_SUPERIO_INT		BIT(4)
+#define MACE_MISC_INT			BIT(5)
+#define MACE_AUDIO_INT			BIT(6)
+#define MACE_PCI_BRIDGE_INT		BIT(7)
+#define MACEPCI_SCSI0_INT		BIT(8)
+#define MACEPCI_SCSI1_INT		BIT(9)
+#define MACEPCI_SLOT0_INT		BIT(10)
+#define MACEPCI_SLOT1_INT		BIT(11)
+#define MACEPCI_SLOT2_INT		BIT(12)
+#define MACEPCI_SHARED0_INT		BIT(13)
+#define MACEPCI_SHARED1_INT		BIT(14)
+#define MACEPCI_SHARED2_INT		BIT(15)
+#define CRIME_GBE0_INT			BIT(16)
+#define CRIME_GBE1_INT			BIT(17)
+#define CRIME_GBE2_INT			BIT(18)
+#define CRIME_GBE3_INT			BIT(19)
+#define CRIME_CPUERR_INT		BIT(20)
+#define CRIME_MEMERR_INT		BIT(21)
+#define CRIME_RE_EMPTY_E_INT		BIT(22)
+#define CRIME_RE_FULL_E_INT		BIT(23)
+#define CRIME_RE_IDLE_E_INT		BIT(24)
+#define CRIME_RE_EMPTY_L_INT		BIT(25)
+#define CRIME_RE_FULL_L_INT		BIT(26)
+#define CRIME_RE_IDLE_L_INT    		BIT(27)
+#define CRIME_SOFT0_INT			BIT(28)
+#define CRIME_SOFT1_INT			BIT(29)
+#define CRIME_SOFT2_INT			BIT(30)
+#define CRIME_SYSCORERR_INT		CRIME_SOFT2_INT
+#define CRIME_VICE_INT			BIT(31)
+/* Masks for deciding who handles the interrupt */
+#define CRIME_MACE_INT_MASK		0x8f
+#define CRIME_MACEISA_INT_MASK		0x70
+#define CRIME_MACEPCI_INT_MASK		0xff00
+#define CRIME_CRIME_INT_MASK		0xffff0000
+
+	volatile unsigned long watchdog;
+#define CRIME_DOG_POWER_ON_RESET	0x00010000
+#define CRIME_DOG_WARM_RESET		0x00080000
+#define CRIME_DOG_TIMEOUT		(CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET)
+#define CRIME_DOG_VALUE			0x00007fff
+
+	volatile unsigned long timer;
+#define CRIME_MASTER_FREQ		66666500	/* Crime upcounter frequency */
+#define CRIME_NS_PER_TICK		15		/* for delay_calibrate */
+
+	volatile unsigned long cpu_error_addr;
+#define CRIME_CPU_ERROR_ADDR_MASK	0x3ffffffff
+
+	volatile unsigned long cpu_error_stat;
+#define CRIME_CPU_ERROR_MASK		0x7		/* cpu error stat is 3 bits */
+#define CRIME_CPU_ERROR_CPU_ILL_ADDR	0x4
+#define CRIME_CPU_ERROR_VICE_WRT_PRTY	0x2
+#define CRIME_CPU_ERROR_CPU_WRT_PRTY	0x1
+
+	unsigned long _pad0[54];
+
+	volatile unsigned long mc_ctrl;
+	volatile unsigned long bank_ctrl[8];
+#define CRIME_MEM_BANK_CONTROL_MASK		0x11f	/* 9 bits 7:5 reserved */
+#define CRIME_MEM_BANK_CONTROL_ADDR		0x01f
+#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE	0x100
+#define CRIME_MAXBANKS				8
+
+	volatile unsigned long mem_ref_counter;
+#define CRIME_MEM_REF_COUNTER_MASK	0x3ff		/* 10bit */
+
+	volatile unsigned long mem_error_stat;
+#define CRIME_MEM_ERROR_STAT_MASK       0x0ff7ffff	/* 28-bit register */
+#define CRIME_MEM_ERROR_MACE_ID		0x0000007f
+#define CRIME_MEM_ERROR_MACE_ACCESS	0x00000080
+#define CRIME_MEM_ERROR_RE_ID		0x00007f00
+#define CRIME_MEM_ERROR_RE_ACCESS	0x00008000
+#define CRIME_MEM_ERROR_GBE_ACCESS	0x00010000
+#define CRIME_MEM_ERROR_VICE_ACCESS	0x00020000
+#define CRIME_MEM_ERROR_CPU_ACCESS	0x00040000
+#define CRIME_MEM_ERROR_RESERVED	0x00080000
+#define CRIME_MEM_ERROR_SOFT_ERR	0x00100000
+#define CRIME_MEM_ERROR_HARD_ERR	0x00200000
+#define CRIME_MEM_ERROR_MULTIPLE	0x00400000
+#define CRIME_MEM_ERROR_ECC		0x01800000
+#define CRIME_MEM_ERROR_MEM_ECC_RD	0x00800000
+#define CRIME_MEM_ERROR_MEM_ECC_RMW	0x01000000
+#define CRIME_MEM_ERROR_INV		0x0e000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD	0x02000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR	0x04000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000
+
+	volatile unsigned long mem_error_addr;
+#define CRIME_MEM_ERROR_ADDR_MASK	0x3fffffff
+
+	volatile unsigned long mem_ecc_syn;
+#define CRIME_MEM_ERROR_ECC_SYN_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_chk;
+#define CRIME_MEM_ERROR_ECC_CHK_MASK	0xffffffff
+
+	volatile unsigned long mem_ecc_repl;
+#define CRIME_MEM_ERROR_ECC_REPL_MASK	0xffffffff
+};
+
+extern struct sgi_crime __iomem *crime;
+
+#define CRIME_HI_MEM_BASE	0x40000000	/* this is where whole 1G of RAM is mapped */
+
+#endif /* __ASM_CRIME_H__ */
diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h
new file mode 100644
index 0000000..85bc530
--- /dev/null
+++ b/arch/mips/include/asm/ip32/ip32_ints.h
@@ -0,0 +1,114 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_IP32_INTS_H
+#define __ASM_IP32_INTS_H
+
+#include <asm/irq.h>
+
+/*
+ * This list reflects the assignment of interrupt numbers to
+ * interrupting events.  Order is fairly irrelevant to handling
+ * priority.  This differs from irix.
+ */
+
+enum ip32_irq_no {
+	/*
+	 * CPU interrupts are 0 ... 7
+	 */
+
+	CRIME_IRQ_BASE			= MIPS_CPU_IRQ_BASE + 8,
+
+	/*
+	 * MACE
+	 */
+	MACE_VID_IN1_IRQ		= CRIME_IRQ_BASE,
+	MACE_VID_IN2_IRQ,
+	MACE_VID_OUT_IRQ,
+	MACE_ETHERNET_IRQ,
+	/* SUPERIO, MISC, and AUDIO are MACEISA */
+	__MACE_SUPERIO,
+	__MACE_MISC,
+	__MACE_AUDIO,
+	MACE_PCI_BRIDGE_IRQ,
+
+	/*
+	 * MACEPCI
+	 */
+	MACEPCI_SCSI0_IRQ,
+	MACEPCI_SCSI1_IRQ,
+	MACEPCI_SLOT0_IRQ,
+	MACEPCI_SLOT1_IRQ,
+	MACEPCI_SLOT2_IRQ,
+	MACEPCI_SHARED0_IRQ,
+	MACEPCI_SHARED1_IRQ,
+	MACEPCI_SHARED2_IRQ,
+
+	/*
+	 * CRIME
+	 */
+	CRIME_GBE0_IRQ,
+	CRIME_GBE1_IRQ,
+	CRIME_GBE2_IRQ,
+	CRIME_GBE3_IRQ,
+	CRIME_CPUERR_IRQ,
+	CRIME_MEMERR_IRQ,
+	CRIME_RE_EMPTY_E_IRQ,
+	CRIME_RE_FULL_E_IRQ,
+	CRIME_RE_IDLE_E_IRQ,
+	CRIME_RE_EMPTY_L_IRQ,
+	CRIME_RE_FULL_L_IRQ,
+	CRIME_RE_IDLE_L_IRQ,
+	CRIME_SOFT0_IRQ,
+	CRIME_SOFT1_IRQ,
+	CRIME_SOFT2_IRQ,
+	CRIME_SYSCORERR_IRQ		= CRIME_SOFT2_IRQ,
+	CRIME_VICE_IRQ,
+
+	/*
+	 * MACEISA
+	 */
+	MACEISA_AUDIO_SW_IRQ,
+	MACEISA_AUDIO_SC_IRQ,
+	MACEISA_AUDIO1_DMAT_IRQ,
+	MACEISA_AUDIO1_OF_IRQ,
+	MACEISA_AUDIO2_DMAT_IRQ,
+	MACEISA_AUDIO2_MERR_IRQ,
+	MACEISA_AUDIO3_DMAT_IRQ,
+	MACEISA_AUDIO3_MERR_IRQ,
+	MACEISA_RTC_IRQ,
+	MACEISA_KEYB_IRQ,
+	/* MACEISA_KEYB_POLL is not an IRQ */
+	__MACEISA_KEYB_POLL,
+	MACEISA_MOUSE_IRQ,
+	/* MACEISA_MOUSE_POLL is not an IRQ */
+	__MACEISA_MOUSE_POLL,
+	MACEISA_TIMER0_IRQ,
+	MACEISA_TIMER1_IRQ,
+	MACEISA_TIMER2_IRQ,
+	MACEISA_PARALLEL_IRQ,
+	MACEISA_PAR_CTXA_IRQ,
+	MACEISA_PAR_CTXB_IRQ,
+	MACEISA_PAR_MERR_IRQ,
+	MACEISA_SERIAL1_IRQ,
+	MACEISA_SERIAL1_TDMAT_IRQ,
+	MACEISA_SERIAL1_TDMAPR_IRQ,
+	MACEISA_SERIAL1_TDMAME_IRQ,
+	MACEISA_SERIAL1_RDMAT_IRQ,
+	MACEISA_SERIAL1_RDMAOR_IRQ,
+	MACEISA_SERIAL2_IRQ,
+	MACEISA_SERIAL2_TDMAT_IRQ,
+	MACEISA_SERIAL2_TDMAPR_IRQ,
+	MACEISA_SERIAL2_TDMAME_IRQ,
+	MACEISA_SERIAL2_RDMAT_IRQ,
+	MACEISA_SERIAL2_RDMAOR_IRQ,
+
+	IP32_IRQ_MAX			= MACEISA_SERIAL2_RDMAOR_IRQ
+};
+
+#endif /* __ASM_IP32_INTS_H */
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
new file mode 100644
index 0000000..d08d7c6
--- /dev/null
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -0,0 +1,365 @@
+/*
+ * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2004 Ladislav Michl
+ */
+
+#ifndef __ASM_MACE_H__
+#define __ASM_MACE_H__
+
+/*
+ * Address map
+ */
+#define MACE_BASE	0x1f000000	/* physical */
+
+/*
+ * PCI interface
+ */
+struct mace_pci {
+	volatile unsigned int error_addr;
+	volatile unsigned int error;
+#define MACEPCI_ERROR_MASTER_ABORT		BIT(31)
+#define MACEPCI_ERROR_TARGET_ABORT		BIT(30)
+#define MACEPCI_ERROR_DATA_PARITY_ERR		BIT(29)
+#define MACEPCI_ERROR_RETRY_ERR			BIT(28)
+#define MACEPCI_ERROR_ILLEGAL_CMD		BIT(27)
+#define MACEPCI_ERROR_SYSTEM_ERR		BIT(26)
+#define MACEPCI_ERROR_INTERRUPT_TEST		BIT(25)
+#define MACEPCI_ERROR_PARITY_ERR		BIT(24)
+#define MACEPCI_ERROR_OVERRUN			BIT(23)
+#define MACEPCI_ERROR_RSVD			BIT(22)
+#define MACEPCI_ERROR_MEMORY_ADDR		BIT(21)
+#define MACEPCI_ERROR_CONFIG_ADDR		BIT(20)
+#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID	BIT(19)
+#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID	BIT(18)
+#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID	BIT(17)
+#define MACEPCI_ERROR_RETRY_ADDR_VALID		BIT(16)
+#define MACEPCI_ERROR_SIG_TABORT		BIT(4)
+#define MACEPCI_ERROR_DEVSEL_MASK		0xc0
+#define MACEPCI_ERROR_DEVSEL_FAST		0
+#define MACEPCI_ERROR_DEVSEL_MED		0x40
+#define MACEPCI_ERROR_DEVSEL_SLOW		0x80
+#define MACEPCI_ERROR_FBB			BIT(1)
+#define MACEPCI_ERROR_66MHZ			BIT(0)
+	volatile unsigned int control;
+#define MACEPCI_CONTROL_INT(x)			BIT(x)
+#define MACEPCI_CONTROL_INT_MASK		0xff
+#define MACEPCI_CONTROL_SERR_ENA		BIT(8)
+#define MACEPCI_CONTROL_ARB_N6			BIT(9)
+#define MACEPCI_CONTROL_PARITY_ERR		BIT(10)
+#define MACEPCI_CONTROL_MRMRA_ENA		BIT(11)
+#define MACEPCI_CONTROL_ARB_N3			BIT(12)
+#define MACEPCI_CONTROL_ARB_N4			BIT(13)
+#define MACEPCI_CONTROL_ARB_N5			BIT(14)
+#define MACEPCI_CONTROL_PARK_LIU		BIT(15)
+#define MACEPCI_CONTROL_INV_INT(x)		BIT(16+x)
+#define MACEPCI_CONTROL_INV_INT_MASK		0x00ff0000
+#define MACEPCI_CONTROL_OVERRUN_INT		BIT(24)
+#define MACEPCI_CONTROL_PARITY_INT		BIT(25)
+#define MACEPCI_CONTROL_SERR_INT		BIT(26)
+#define MACEPCI_CONTROL_IT_INT			BIT(27)
+#define MACEPCI_CONTROL_RE_INT			BIT(28)
+#define MACEPCI_CONTROL_DPED_INT		BIT(29)
+#define MACEPCI_CONTROL_TAR_INT			BIT(30)
+#define MACEPCI_CONTROL_MAR_INT			BIT(31)
+	volatile unsigned int rev;
+	unsigned int _pad[0xcf8/4 - 4];
+	volatile unsigned int config_addr;
+	union {
+		volatile unsigned char b[4];
+		volatile unsigned short w[2];
+		volatile unsigned int l;
+	} config_data;
+};
+#define MACEPCI_LOW_MEMORY		0x1a000000
+#define MACEPCI_LOW_IO			0x18000000
+#define MACEPCI_SWAPPED_VIEW		0
+#define MACEPCI_NATIVE_VIEW		0x40000000
+#define MACEPCI_IO			0x80000000
+#define MACEPCI_HI_MEMORY		0x280000000
+#define MACEPCI_HI_IO			0x100000000
+
+/*
+ * Video interface
+ */
+struct mace_video {
+	unsigned long xxx;	/* later... */
+};
+
+/*
+ * Ethernet interface
+ */
+struct mace_ethernet {
+	volatile unsigned long mac_ctrl;
+	volatile unsigned long int_stat;
+	volatile unsigned long dma_ctrl;
+	volatile unsigned long timer;
+	volatile unsigned long tx_int_al;
+	volatile unsigned long rx_int_al;
+	volatile unsigned long tx_info;
+	volatile unsigned long tx_info_al;
+	volatile unsigned long rx_buff;
+	volatile unsigned long rx_buff_al1;
+	volatile unsigned long rx_buff_al2;
+	volatile unsigned long diag;
+	volatile unsigned long phy_data;
+	volatile unsigned long phy_regs;
+	volatile unsigned long phy_trans_go;
+	volatile unsigned long backoff_seed;
+	/*===================================*/
+	volatile unsigned long imq_reserved[4];
+	volatile unsigned long mac_addr;
+	volatile unsigned long mac_addr2;
+	volatile unsigned long mcast_filter;
+	volatile unsigned long tx_ring_base;
+	/* Following are read-only registers for debugging */
+	volatile unsigned long tx_pkt1_hdr;
+	volatile unsigned long tx_pkt1_ptr[3];
+	volatile unsigned long tx_pkt2_hdr;
+	volatile unsigned long tx_pkt2_ptr[3];
+	/*===================================*/
+	volatile unsigned long rx_fifo;
+};
+
+/*
+ * Peripherals
+ */
+
+/* Audio registers */
+struct mace_audio {
+	volatile unsigned long control;
+	volatile unsigned long codec_control;		/* codec status control */
+	volatile unsigned long codec_mask;		/* codec status input mask */
+	volatile unsigned long codec_read;		/* codec status read data */
+	struct {
+		volatile unsigned long control;		/* channel control */
+		volatile unsigned long read_ptr;	/* channel read pointer */
+		volatile unsigned long write_ptr;	/* channel write pointer */
+		volatile unsigned long depth;		/* channel depth */
+	} chan[3];
+};
+
+
+/* register definitions for parallel port DMA */
+struct mace_parport {
+	/* 0 - do nothing,
+	 * 1 - pulse terminal count to the device after buffer is drained */
+#define MACEPAR_CONTEXT_LASTFLAG	BIT(63)
+	/* Should not cross 4K page boundary */
+#define MACEPAR_CONTEXT_DATA_BOUND	0x0000000000001000UL
+#define MACEPAR_CONTEXT_DATALEN_MASK	0x00000fff00000000UL
+#define MACEPAR_CONTEXT_DATALEN_SHIFT	32
+	/* Can be arbitrarily aligned on any byte boundary on output,
+	 * 64 byte aligned on input */
+#define MACEPAR_CONTEXT_BASEADDR_MASK	0x00000000ffffffffUL
+	volatile u64 context_a;
+	volatile u64 context_b;
+	/* 0 - mem->device, 1 - device->mem */
+#define MACEPAR_CTLSTAT_DIRECTION	BIT(0)
+	/* 0 - channel frozen, 1 - channel enabled */
+#define MACEPAR_CTLSTAT_ENABLE		BIT(1)
+	/* 0 - channel active, 1 - complete channel reset */
+#define MACEPAR_CTLSTAT_RESET		BIT(2)
+#define MACEPAR_CTLSTAT_CTXB_VALID	BIT(3)
+#define MACEPAR_CTLSTAT_CTXA_VALID	BIT(4)
+	volatile u64 cntlstat;		/* Control/Status register */
+#define MACEPAR_DIAG_CTXINUSE		BIT(0)
+	/* 1 - Dma engine is enabled and processing something */
+#define MACEPAR_DIAG_DMACTIVE		BIT(1)
+	/* Counter of bytes left */
+#define MACEPAR_DIAG_CTRMASK		0x0000000000003ffcUL
+#define MACEPAR_DIAG_CTRSHIFT		2
+	volatile u64 diagnostic;	/* RO: diagnostic register */
+};
+
+/* ISA Control and DMA registers */
+struct mace_isactrl {
+	volatile unsigned long ringbase;
+#define MACEISA_RINGBUFFERS_SIZE	(8 * 4096)
+
+	volatile unsigned long misc;
+#define MACEISA_FLASH_WE		BIT(0)	/* 1=> Enable FLASH writes */
+#define MACEISA_PWD_CLEAR		BIT(1)	/* 1=> PWD CLEAR jumper detected */
+#define MACEISA_NIC_DEASSERT		BIT(2)
+#define MACEISA_NIC_DATA		BIT(3)
+#define MACEISA_LED_RED			BIT(4)	/* 0=> Illuminate red LED */
+#define MACEISA_LED_GREEN		BIT(5)	/* 0=> Illuminate green LED */
+#define MACEISA_DP_RAM_ENABLE		BIT(6)
+
+	volatile unsigned long istat;
+	volatile unsigned long imask;
+#define MACEISA_AUDIO_SW_INT		BIT(0)
+#define MACEISA_AUDIO_SC_INT		BIT(1)
+#define MACEISA_AUDIO1_DMAT_INT		BIT(2)
+#define MACEISA_AUDIO1_OF_INT		BIT(3)
+#define MACEISA_AUDIO2_DMAT_INT		BIT(4)
+#define MACEISA_AUDIO2_MERR_INT		BIT(5)
+#define MACEISA_AUDIO3_DMAT_INT		BIT(6)
+#define MACEISA_AUDIO3_MERR_INT		BIT(7)
+#define MACEISA_RTC_INT			BIT(8)
+#define MACEISA_KEYB_INT		BIT(9)
+#define MACEISA_KEYB_POLL_INT		BIT(10)
+#define MACEISA_MOUSE_INT		BIT(11)
+#define MACEISA_MOUSE_POLL_INT		BIT(12)
+#define MACEISA_TIMER0_INT		BIT(13)
+#define MACEISA_TIMER1_INT		BIT(14)
+#define MACEISA_TIMER2_INT		BIT(15)
+#define MACEISA_PARALLEL_INT		BIT(16)
+#define MACEISA_PAR_CTXA_INT		BIT(17)
+#define MACEISA_PAR_CTXB_INT		BIT(18)
+#define MACEISA_PAR_MERR_INT		BIT(19)
+#define MACEISA_SERIAL1_INT		BIT(20)
+#define MACEISA_SERIAL1_TDMAT_INT	BIT(21)
+#define MACEISA_SERIAL1_TDMAPR_INT	BIT(22)
+#define MACEISA_SERIAL1_TDMAME_INT	BIT(23)
+#define MACEISA_SERIAL1_RDMAT_INT	BIT(24)
+#define MACEISA_SERIAL1_RDMAOR_INT	BIT(25)
+#define MACEISA_SERIAL2_INT		BIT(26)
+#define MACEISA_SERIAL2_TDMAT_INT	BIT(27)
+#define MACEISA_SERIAL2_TDMAPR_INT	BIT(28)
+#define MACEISA_SERIAL2_TDMAME_INT	BIT(29)
+#define MACEISA_SERIAL2_RDMAT_INT	BIT(30)
+#define MACEISA_SERIAL2_RDMAOR_INT	BIT(31)
+
+	volatile unsigned long _pad[0x2000/8 - 4];
+
+	volatile unsigned long dp_ram[0x400];
+	struct mace_parport parport;
+};
+
+/* Keyboard & Mouse registers
+ * -> drivers/input/serio/maceps2.c */
+struct mace_ps2port {
+	volatile unsigned long tx;
+	volatile unsigned long rx;
+	volatile unsigned long control;
+	volatile unsigned long status;
+};
+
+struct mace_ps2 {
+	struct mace_ps2port keyb;
+	struct mace_ps2port mouse;
+};
+
+/* I2C registers
+ * -> drivers/i2c/algos/i2c-algo-sgi.c */
+struct mace_i2c {
+	volatile unsigned long config;
+#define MACEI2C_RESET           BIT(0)
+#define MACEI2C_FAST            BIT(1)
+#define MACEI2C_DATA_OVERRIDE   BIT(2)
+#define MACEI2C_CLOCK_OVERRIDE  BIT(3)
+#define MACEI2C_DATA_STATUS     BIT(4)
+#define MACEI2C_CLOCK_STATUS    BIT(5)
+	volatile unsigned long control;
+	volatile unsigned long data;
+};
+
+/* Timer registers */
+typedef union {
+	volatile unsigned long ust_msc;
+	struct reg {
+		volatile unsigned int ust;
+		volatile unsigned int msc;
+	} reg;
+} timer_reg;
+
+struct mace_timers {
+	volatile unsigned long ust;
+#define MACE_UST_PERIOD_NS	960
+
+	volatile unsigned long compare1;
+	volatile unsigned long compare2;
+	volatile unsigned long compare3;
+
+	timer_reg audio_in;
+	timer_reg audio_out1;
+	timer_reg audio_out2;
+	timer_reg video_in1;
+	timer_reg video_in2;
+	timer_reg video_out;
+};
+
+struct mace_perif {
+	struct mace_audio audio;
+	char _pad0[0x10000 - sizeof(struct mace_audio)];
+
+	struct mace_isactrl ctrl;
+	char _pad1[0x10000 - sizeof(struct mace_isactrl)];
+
+	struct mace_ps2 ps2;
+	char _pad2[0x10000 - sizeof(struct mace_ps2)];
+
+	struct mace_i2c i2c;
+	char _pad3[0x10000 - sizeof(struct mace_i2c)];
+
+	struct mace_timers timers;
+	char _pad4[0x10000 - sizeof(struct mace_timers)];
+};
+
+
+/*
+ * ISA peripherals
+ */
+
+/* Parallel port */
+struct mace_parallel {
+};
+
+struct mace_ecp1284 {	/* later... */
+};
+
+/* Serial port */
+struct mace_serial {
+	volatile unsigned long xxx;	/* later... */
+};
+
+struct mace_isa {
+	struct mace_parallel parallel;
+	char _pad1[0x8000 - sizeof(struct mace_parallel)];
+
+	struct mace_ecp1284 ecp1284;
+	char _pad2[0x8000 - sizeof(struct mace_ecp1284)];
+
+	struct mace_serial serial1;
+	char _pad3[0x8000 - sizeof(struct mace_serial)];
+
+	struct mace_serial serial2;
+	char _pad4[0x8000 - sizeof(struct mace_serial)];
+
+	volatile unsigned char rtc[0x10000];
+};
+
+struct sgi_mace {
+	char _reserved[0x80000];
+
+	struct mace_pci pci;
+	char _pad0[0x80000 - sizeof(struct mace_pci)];
+
+	struct mace_video video_in1;
+	char _pad1[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_in2;
+	char _pad2[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_video video_out;
+	char _pad3[0x80000 - sizeof(struct mace_video)];
+
+	struct mace_ethernet eth;
+	char _pad4[0x80000 - sizeof(struct mace_ethernet)];
+
+	struct mace_perif perif;
+	char _pad5[0x80000 - sizeof(struct mace_perif)];
+
+	struct mace_isa isa;
+	char _pad6[0x80000 - sizeof(struct mace_isa)];
+};
+
+extern struct sgi_mace __iomem *mace;
+
+#endif /* __ASM_MACE_H__ */
diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h
new file mode 100644
index 0000000..d47d08f
--- /dev/null
+++ b/arch/mips/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
new file mode 100644
index 0000000..a58f0ee
--- /dev/null
+++ b/arch/mips/include/asm/irq.h
@@ -0,0 +1,163 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/linkage.h>
+
+#include <asm/mipsmtregs.h>
+
+#include <irq.h>
+
+#ifdef CONFIG_I8259
+static inline int irq_canonicalize(int irq)
+{
+	return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq);
+}
+#else
+#define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+
+struct irqaction;
+
+extern unsigned long irq_hwmask[];
+extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+                          unsigned long hwmask);
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+}
+
+#else
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+}
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+#include <linux/cpumask.h>
+
+extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity);
+extern void smtc_forward_irq(unsigned int irq);
+
+/*
+ * IRQ affinity hook invoked at the beginning of interrupt dispatch
+ * if option is enabled.
+ *
+ * Up through Linux 2.6.22 (at least) cpumask operations are very
+ * inefficient on MIPS.  Initial prototypes of SMTC IRQ affinity
+ * used a "fast path" per-IRQ-descriptor cache of affinity information
+ * to reduce latency.  As there is a project afoot to optimize the
+ * cpumask implementations, this version is optimistically assuming
+ * that cpumask.h macro overhead is reasonable during interrupt dispatch.
+ */
+#define IRQ_AFFINITY_HOOK(irq)						\
+do {									\
+    if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) {	\
+	smtc_forward_irq(irq);						\
+	irq_exit();							\
+	return;								\
+    }									\
+} while (0)
+
+#else /* Not doing SMTC affinity */
+
+#define IRQ_AFFINITY_HOOK(irq) do { } while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
+
+/*
+ * Clear interrupt mask handling "backstop" if irq_hwmask
+ * entry so indicates. This implies that the ack() or end()
+ * functions will take over re-enabling the low-level mask.
+ * Otherwise it will be done on return from exception.
+ */
+#define __DO_IRQ_SMTC_HOOK(irq)						\
+do {									\
+	IRQ_AFFINITY_HOOK(irq);						\
+	if (irq_hwmask[irq] & 0x0000ff00)				\
+		write_c0_tccontext(read_c0_tccontext() &		\
+				   ~(irq_hwmask[irq] & 0x0000ff00));	\
+} while (0)
+
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq)				\
+do {									\
+	if (irq_hwmask[irq] & 0x0000ff00)                               \
+		write_c0_tccontext(read_c0_tccontext() &		\
+				   ~(irq_hwmask[irq] & 0x0000ff00));	\
+} while (0)
+
+#else
+
+#define __DO_IRQ_SMTC_HOOK(irq)						\
+do {									\
+	IRQ_AFFINITY_HOOK(irq);						\
+} while (0)
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0)
+
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ *
+ * Ideally there should be away to get this into kernel/irq/handle.c to
+ * avoid the overhead of a call for just a tiny function ...
+ */
+#define do_IRQ(irq)							\
+do {									\
+	irq_enter();							\
+	__DO_IRQ_SMTC_HOOK(irq);					\
+	generic_handle_irq(irq);					\
+	irq_exit();							\
+} while (0)
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+/*
+ * To avoid inefficient and in some cases pathological re-checking of
+ * IRQ affinity, we have this variant that skips the affinity check.
+ */
+
+
+#define do_IRQ_no_affinity(irq)						\
+do {									\
+	irq_enter();							\
+	__NO_AFFINITY_IRQ_SMTC_HOOK(irq);				\
+	generic_handle_irq(irq);					\
+	irq_exit();							\
+} while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+extern void arch_init_irq(void);
+extern void spurious_interrupt(void);
+
+extern int allocate_irqno(void);
+extern void alloc_legacy_irqno(void);
+extern void free_irqno(unsigned int irq);
+
+/*
+ * Before R2 the timer and performance counter interrupts were both fixed to
+ * IE7.  Since R2 their number has to be read from the c0_intctl register.
+ */
+#define CP0_LEGACY_COMPARE_IRQ 7
+
+extern int cp0_compare_irq;
+extern int cp0_perfcount_irq;
+
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
new file mode 100644
index 0000000..ef6a07c
--- /dev/null
+++ b/arch/mips/include/asm/irq_cpu.h
@@ -0,0 +1,20 @@
+/*
+ *	include/asm-mips/irq_cpu.h
+ *
+ *	MIPS CPU interrupt definitions.
+ *
+ *	Copyright (C) 2002  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_CPU_H
+#define _ASM_IRQ_CPU_H
+
+extern void mips_cpu_irq_init(void);
+extern void rm7k_cpu_irq_init(void);
+extern void rm9k_cpu_irq_init(void);
+
+#endif /* _ASM_IRQ_CPU_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
new file mode 100644
index 0000000..f9a7c3a
--- /dev/null
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -0,0 +1,60 @@
+/*
+ *  Galileo/Marvell GT641xx IRQ definitions.
+ *
+ *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _ASM_IRQ_GT641XX_H
+#define _ASM_IRQ_GT641XX_H
+
+#ifndef GT641XX_IRQ_BASE
+#define GT641XX_IRQ_BASE		8
+#endif
+
+#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ		(GT641XX_IRQ_BASE + 1)
+#define GT641XX_DMA_OUT_OF_RANGE_IRQ		(GT641XX_IRQ_BASE + 2)
+#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ	(GT641XX_IRQ_BASE + 3)
+#define GT641XX_DMA0_IRQ			(GT641XX_IRQ_BASE + 4)
+#define GT641XX_DMA1_IRQ			(GT641XX_IRQ_BASE + 5)
+#define GT641XX_DMA2_IRQ			(GT641XX_IRQ_BASE + 6)
+#define GT641XX_DMA3_IRQ			(GT641XX_IRQ_BASE + 7)
+#define GT641XX_TIMER0_IRQ			(GT641XX_IRQ_BASE + 8)
+#define GT641XX_TIMER1_IRQ			(GT641XX_IRQ_BASE + 9)
+#define GT641XX_TIMER2_IRQ			(GT641XX_IRQ_BASE + 10)
+#define GT641XX_TIMER3_IRQ			(GT641XX_IRQ_BASE + 11)
+#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ	(GT641XX_IRQ_BASE + 12)
+#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ	(GT641XX_IRQ_BASE + 13)
+#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ	(GT641XX_IRQ_BASE + 14)
+#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ	(GT641XX_IRQ_BASE + 15)
+#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ		(GT641XX_IRQ_BASE + 16)
+#define GT641XX_MEMORY_ERROR_IRQ		(GT641XX_IRQ_BASE + 17)
+#define GT641XX_PCI_0_MASTER_ABORT_IRQ		(GT641XX_IRQ_BASE + 18)
+#define GT641XX_PCI_0_TARGET_ABORT_IRQ		(GT641XX_IRQ_BASE + 19)
+#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ		(GT641XX_IRQ_BASE + 20)
+#define GT641XX_CPU_INT0_IRQ			(GT641XX_IRQ_BASE + 21)
+#define GT641XX_CPU_INT1_IRQ			(GT641XX_IRQ_BASE + 22)
+#define GT641XX_CPU_INT2_IRQ			(GT641XX_IRQ_BASE + 23)
+#define GT641XX_CPU_INT3_IRQ			(GT641XX_IRQ_BASE + 24)
+#define GT641XX_CPU_INT4_IRQ			(GT641XX_IRQ_BASE + 25)
+#define GT641XX_PCI_INT0_IRQ			(GT641XX_IRQ_BASE + 26)
+#define GT641XX_PCI_INT1_IRQ			(GT641XX_IRQ_BASE + 27)
+#define GT641XX_PCI_INT2_IRQ			(GT641XX_IRQ_BASE + 28)
+#define GT641XX_PCI_INT3_IRQ			(GT641XX_IRQ_BASE + 29)
+
+extern void gt641xx_irq_dispatch(void);
+extern void gt641xx_irq_init(void);
+
+#endif /* _ASM_IRQ_GT641XX_H */
diff --git a/arch/mips/include/asm/irq_regs.h b/arch/mips/include/asm/irq_regs.h
new file mode 100644
index 0000000..33bd2a0
--- /dev/null
+++ b/arch/mips/include/asm/irq_regs.h
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_IRQ_REGS_H
+#define __ASM_IRQ_REGS_H
+
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#include <linux/thread_info.h>
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return current_thread_info()->regs;
+}
+
+#endif /* __ASM_IRQ_REGS_H */
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
new file mode 100644
index 0000000..701ec0b
--- /dev/null
+++ b/arch/mips/include/asm/irqflags.h
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/hazards.h>
+
+__asm__(
+	"	.macro	raw_local_irq_enable				\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
+	"	ori	$1, 0x400					\n"
+	"	xori	$1, 0x400					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	ei							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1e						\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_enable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm");
+
+extern void smtc_ipi_replay(void);
+
+static inline void raw_local_irq_enable(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
+	__asm__ __volatile__(
+		"raw_local_irq_enable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+	"	.macro	raw_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1f						\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"raw_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+__asm__(
+	"	.macro	raw_local_save_flags flags			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\flags, $2, 1					\n"
+#else
+	"	mfc0	\\flags, $12					\n"
+#endif
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_save_flags(x)						\
+__asm__ __volatile__(							\
+	"raw_local_save_flags %0"					\
+	: "=r" (x))
+
+__asm__(
+	"	.macro	raw_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di	\\result					\n"
+	"	andi	\\result, 1					\n"
+#else
+	"	mfc0	\\result, $12					\n"
+	"	ori	$1, \\result, 0x1f				\n"
+	"	xori	$1, 0x1f					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_irq_save(x)						\
+__asm__ __volatile__(							\
+	"raw_local_irq_save\t%0"					\
+	: "=r" (x)							\
+	: /* no inputs */						\
+	: "memory")
+
+__asm__(
+	"	.macro	raw_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+	/*
+	 * Slow, but doesn't suffer from a relativly unlikely race
+	 * condition we're having since days 1.
+	 */
+	"	beqz	\\flags, 1f					\n"
+	"	 di							\n"
+	"	ei							\n"
+	"1:								\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/*
+	 * Fast, dangerous.  Life is fun, life is good.
+	 */
+	"	mfc0	$1, $12						\n"
+	"	ins	$1, \\flags, 0, 1				\n"
+	"	mtc0	$1, $12						\n"
+#else
+	"	mfc0	$1, $12						\n"
+	"	andi	\\flags, 1					\n"
+	"	ori	$1, 0x1f					\n"
+	"	xori	$1, 0x1f					\n"
+	"	or	\\flags, $1					\n"
+	"	mtc0	\\flags, $12					\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of branch and call overhead on each
+	 * local_irq_restore()
+	 */
+	if (unlikely(!(flags & 0x0400)))
+		smtc_ipi_replay();
+#endif
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+	 */
+	return flags & 0x400;
+#else
+	return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+/* Reload some registers clobbered by trace_hardirqs_on */
+#ifdef CONFIG_64BIT
+# define TRACE_IRQS_RELOAD_REGS						\
+	LONG_L	$11, PT_R11(sp);					\
+	LONG_L	$10, PT_R10(sp);					\
+	LONG_L	$9, PT_R9(sp);						\
+	LONG_L	$8, PT_R8(sp);						\
+	LONG_L	$7, PT_R7(sp);						\
+	LONG_L	$6, PT_R6(sp);						\
+	LONG_L	$5, PT_R5(sp);						\
+	LONG_L	$4, PT_R4(sp);						\
+	LONG_L	$2, PT_R2(sp)
+#else
+# define TRACE_IRQS_RELOAD_REGS						\
+	LONG_L	$7, PT_R7(sp);						\
+	LONG_L	$6, PT_R6(sp);						\
+	LONG_L	$5, PT_R5(sp);						\
+	LONG_L	$4, PT_R4(sp);						\
+	LONG_L	$2, PT_R2(sp)
+#endif
+# define TRACE_IRQS_ON							\
+	CLI;	/* make sure trace_hardirqs_on() is called in kernel level */ \
+	jal	trace_hardirqs_on
+# define TRACE_IRQS_ON_RELOAD						\
+	TRACE_IRQS_ON;							\
+	TRACE_IRQS_RELOAD_REGS
+# define TRACE_IRQS_OFF							\
+	jal	trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_ON_RELOAD
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */
diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h
new file mode 100644
index 0000000..24c6cda
--- /dev/null
+++ b/arch/mips/include/asm/isadep.h
@@ -0,0 +1,34 @@
+/*
+ * Various ISA level dependent constants.
+ * Most of the following constants reflect the different layout
+ * of Coprocessor 0 registers.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+
+#ifndef __ASM_ISADEP_H
+#define __ASM_ISADEP_H
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+/*
+ * R2000 or R3000
+ */
+
+/*
+ * kernel or user mode? (CP0_STATUS)
+ */
+#define KU_MASK 0x08
+#define	KU_USER 0x08
+#define KU_KERN 0x00
+
+#else
+/*
+ * kernel or user mode?
+ */
+#define KU_MASK 0x18
+#define	KU_USER 0x10
+#define KU_KERN 0x00
+
+#endif
+
+#endif /* __ASM_ISADEP_H */
diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h
new file mode 100644
index 0000000..83f449d
--- /dev/null
+++ b/arch/mips/include/asm/jazz.h
@@ -0,0 +1,310 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
+ */
+#ifndef __ASM_JAZZ_H
+#define __ASM_JAZZ_H
+
+/*
+ * The addresses below are virtual address. The mappings are
+ * created on startup via wired entries in the tlb. The Mips
+ * Magnum R3000 and R4000 machines are similar in many aspects,
+ * but many hardware register are accessible at 0xb9000000 in
+ * instead of 0xe0000000.
+ */
+
+#define JAZZ_LOCAL_IO_SPACE     0xe0000000
+
+/*
+ * Revision numbers in PICA_ASIC_REVISION
+ *
+ * 0xf0000000 - Rev1
+ * 0xf0000001 - Rev2
+ * 0xf0000002 - Rev3
+ */
+#define PICA_ASIC_REVISION      0xe0000008
+
+/*
+ * The segments of the seven segment LED are mapped
+ * to the control bits as follows:
+ *
+ *         (7)
+ *      ---------
+ *      |       |
+ *  (2) |       | (6)
+ *      |  (1)  |
+ *      ---------
+ *      |       |
+ *  (3) |       | (5)
+ *      |  (4)  |
+ *      --------- . (0)
+ */
+#define PICA_LED                0xe000f000
+
+/*
+ * Some characters for the LED control registers
+ * The original Mips machines seem to have a LED display
+ * with integrated decoder while the Acer machines can
+ * control each of the seven segments and the dot independently.
+ * It's only a toy, anyway...
+ */
+#define LED_DOT                 0x01
+#define LED_SPACE               0x00
+#define LED_0                   0xfc
+#define LED_1                   0x60
+#define LED_2                   0xda
+#define LED_3                   0xf2
+#define LED_4                   0x66
+#define LED_5                   0xb6
+#define LED_6                   0xbe
+#define LED_7                   0xe0
+#define LED_8                   0xfe
+#define LED_9                   0xf6
+#define LED_A                   0xee
+#define LED_b                   0x3e
+#define LED_C                   0x9c
+#define LED_d                   0x7a
+#define LED_E                   0x9e
+#define LED_F                   0x8e
+
+#ifndef __ASSEMBLY__
+
+static __inline__ void pica_set_led(unsigned int bits)
+{
+	volatile unsigned int *led_register = (unsigned int *) PICA_LED;
+
+	*led_register = bits;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Base address of the Sonic Ethernet adapter in Jazz machines.
+ */
+#define JAZZ_ETHERNET_BASE  0xe0001000
+
+/*
+ * Base address of the 53C94 SCSI hostadapter in Jazz machines.
+ */
+#define JAZZ_SCSI_BASE		0xe0002000
+
+/*
+ * i8042 keyboard controller for JAZZ and PICA chipsets.
+ * This address is just a guess and seems to differ from
+ * other mips machines such as RC3xxx...
+ */
+#define JAZZ_KEYBOARD_ADDRESS   0xe0005000
+#define JAZZ_KEYBOARD_DATA      0xe0005000
+#define JAZZ_KEYBOARD_COMMAND   0xe0005001
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char data;
+	unsigned char command;
+} jazz_keyboard_hardware;
+
+#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
+
+typedef struct {
+	unsigned char pad0[3];
+	unsigned char data;
+	unsigned char pad1[3];
+	unsigned char command;
+} mips_keyboard_hardware;
+
+/*
+ * For now. Needs to be changed for RC3xxx support. See below.
+ */
+#define keyboard_hardware       jazz_keyboard_hardware
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * i8042 keyboard controller for most other Mips machines.
+ */
+#define MIPS_KEYBOARD_ADDRESS   0xb9005000
+#define MIPS_KEYBOARD_DATA      0xb9005003
+#define MIPS_KEYBOARD_COMMAND   0xb9005007
+
+/*
+ * Serial and parallel ports (WD 16C552) on the Mips JAZZ
+ */
+#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000
+
+/*
+ * Dummy Device Address. Used in jazzdma.c
+ */
+#define JAZZ_DUMMY_DEVICE       0xe000d000
+
+/*
+ * JAZZ timer registers and interrupt no.
+ * Note that the hardware timer interrupt is actually on
+ * cpu level 6, but to keep compatibility with PC stuff
+ * it is remapped to vector 0. See arch/mips/kernel/entry.S.
+ */
+#define JAZZ_TIMER_INTERVAL     0xe0000228
+#define JAZZ_TIMER_REGISTER     0xe0000230
+
+/*
+ * DRAM configuration register
+ */
+#ifndef __ASSEMBLY__
+#ifdef __MIPSEL__
+typedef struct {
+	unsigned int bank2 : 3;
+	unsigned int bank1 : 3;
+	unsigned int mem_bus_width : 1;
+	unsigned int reserved2 : 1;
+	unsigned int page_mode : 1;
+	unsigned int reserved1 : 23;
+} dram_configuration;
+#else /* defined (__MIPSEB__) */
+typedef struct {
+	unsigned int reserved1 : 23;
+	unsigned int page_mode : 1;
+	unsigned int reserved2 : 1;
+	unsigned int mem_bus_width : 1;
+	unsigned int bank1 : 3;
+	unsigned int bank2 : 3;
+} dram_configuration;
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define PICA_DRAM_CONFIG        0xe00fffe0
+
+/*
+ * JAZZ interrupt control registers
+ */
+#define JAZZ_IO_IRQ_SOURCE      0xe0010000
+#define JAZZ_IO_IRQ_ENABLE      0xe0010002
+
+/*
+ * JAZZ Interrupt Level definitions
+ *
+ * This is somewhat broken.  For reasons which nobody can remember anymore
+ * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
+ */
+#define JAZZ_IRQ_START          24
+#define JAZZ_IRQ_END            (24 + 9)
+#define JAZZ_PARALLEL_IRQ       (JAZZ_IRQ_START + 0)
+#define JAZZ_FLOPPY_IRQ         (JAZZ_IRQ_START + 1)
+#define JAZZ_SOUND_IRQ          (JAZZ_IRQ_START + 2)
+#define JAZZ_VIDEO_IRQ          (JAZZ_IRQ_START + 3)
+#define JAZZ_ETHERNET_IRQ       (JAZZ_IRQ_START + 4)
+#define JAZZ_SCSI_IRQ           (JAZZ_IRQ_START + 5)
+#define JAZZ_KEYBOARD_IRQ       (JAZZ_IRQ_START + 6)
+#define JAZZ_MOUSE_IRQ          (JAZZ_IRQ_START + 7)
+#define JAZZ_SERIAL1_IRQ        (JAZZ_IRQ_START + 8)
+#define JAZZ_SERIAL2_IRQ        (JAZZ_IRQ_START + 9)
+
+#define JAZZ_TIMER_IRQ          (MIPS_CPU_IRQ_BASE+6)
+
+
+/*
+ * JAZZ DMA Channels
+ * Note: Channels 4...7 are not used with respect to the Acer PICA-61
+ * chipset which does not provide these DMA channels.
+ */
+#define JAZZ_SCSI_DMA           0              /* SCSI */
+#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */
+#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */
+#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */
+
+/*
+ * JAZZ R4030 MCT_ADR chip (DMA controller)
+ * Note: Virtual Addresses !
+ */
+#define JAZZ_R4030_CONFIG	0xE0000000	/* R4030 config register */
+#define JAZZ_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
+
+#define JAZZ_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
+
+#define JAZZ_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Address */
+
+#define JAZZ_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
+
+/*
+ * Remote Speed Registers.
+ *
+ *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
+ *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
+ *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
+ * 12: reserved, 13: free,     14: 7seg LED, 15: ???
+ */
+#define JAZZ_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
+						/* 0xE0000070,78,80... 0xE00000E8 */
+#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR   0xE0000010	/* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
+
+/*
+ * Virtual (E)ISA controller address
+ */
+#define JAZZ_EISA_IRQ_ACK	0xE0000238	/* EISA interrupt acknowledge */
+
+/*
+ * Access the R4030 DMA and I/O Controller
+ */
+#ifndef __ASSEMBLY__
+
+static inline void r4030_delay(void)
+{
+__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	"nop\n\t"
+	".set\treorder");
+}
+
+static inline unsigned short r4030_read_reg16(unsigned long addr)
+{
+	unsigned short ret = *((volatile unsigned short *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline unsigned int r4030_read_reg32(unsigned long addr)
+{
+	unsigned int ret = *((volatile unsigned int *)addr);
+	r4030_delay();
+	return ret;
+}
+
+static inline void r4030_write_reg16(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned short *)addr) = val;
+	r4030_delay();
+}
+
+static inline void r4030_write_reg32(unsigned long addr, unsigned val)
+{
+	*((volatile unsigned int *)addr) = val;
+	r4030_delay();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define JAZZ_FDC_BASE	0xe0003000
+#define JAZZ_RTC_BASE	0xe0004000
+#define JAZZ_PORT_BASE	0xe2000000
+
+#define JAZZ_EISA_BASE	0xe3000000
+
+#endif /* __ASM_JAZZ_H */
diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
new file mode 100644
index 0000000..8bb37bb
--- /dev/null
+++ b/arch/mips/include/asm/jazzdma.h
@@ -0,0 +1,95 @@
+/*
+ * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
+ */
+#ifndef _ASM_JAZZDMA_H
+#define _ASM_JAZZDMA_H
+
+/*
+ * Prototypes and macros
+ */
+extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
+extern int vdma_free(unsigned long laddr);
+extern int vdma_remap(unsigned long laddr, unsigned long paddr,
+                      unsigned long size);
+extern unsigned long vdma_phys2log(unsigned long paddr);
+extern unsigned long vdma_log2phys(unsigned long laddr);
+extern void vdma_stats(void);		/* for debugging only */
+
+extern void vdma_enable(int channel);
+extern void vdma_disable(int channel);
+extern void vdma_set_mode(int channel, int mode);
+extern void vdma_set_addr(int channel, long addr);
+extern void vdma_set_count(int channel, int count);
+extern int vdma_get_residue(int channel);
+extern int vdma_get_enable(int channel);
+
+/*
+ * some definitions used by the driver functions
+ */
+#define VDMA_PAGESIZE		4096
+#define VDMA_PGTBL_ENTRIES	4096
+#define VDMA_PGTBL_SIZE		(sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
+#define VDMA_PAGE_EMPTY		0xff000000
+
+/*
+ * Macros to get page no. and offset of a given address
+ * Note that VDMA_PAGE() works for physical addresses only
+ */
+#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+
+/*
+ * error code returned by vdma_alloc()
+ * (See also arch/mips/kernel/jazzdma.c)
+ */
+#define VDMA_ERROR              0xffffffff
+
+/*
+ * VDMA pagetable entry description
+ */
+typedef volatile struct VDMA_PGTBL_ENTRY {
+	unsigned int frame;		/* physical frame no. */
+	unsigned int owner;		/* owner of this entry (0=free) */
+} VDMA_PGTBL_ENTRY;
+
+
+/*
+ * DMA channel control registers
+ * in the R4030 MCT_ADR chip
+ */
+#define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
+						/* 0xE0000100,120,140... */
+#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
+						/* 0xE0000108,128,148... */
+#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
+						/* 0xE0000110,130,150... */
+#define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
+						/* 0xE0000118,138,158... */
+
+/* channel enable register bits */
+
+#define R4030_CHNL_ENABLE        (1<<0)
+#define R4030_CHNL_WRITE         (1<<1)
+#define R4030_TC_INTR            (1<<8)
+#define R4030_MEM_INTR           (1<<9)
+#define R4030_ADDR_INTR          (1<<10)
+
+/*
+ * Channel mode register bits
+ */
+#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80      (1)
+#define R4030_MODE_ATIME_120     (2)
+#define R4030_MODE_ATIME_160     (3)
+#define R4030_MODE_ATIME_200     (4)
+#define R4030_MODE_ATIME_240     (5)
+#define R4030_MODE_ATIME_280     (6)
+#define R4030_MODE_ATIME_320     (7)
+#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
+#define R4030_MODE_WIDTH_16      (2<<3)
+#define R4030_MODE_WIDTH_32      (3<<3)
+#define R4030_MODE_INTR_EN       (1<<5)
+#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
+#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
+
+#endif /* _ASM_JAZZDMA_H */
diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h
new file mode 100644
index 0000000..5bf62aa
--- /dev/null
+++ b/arch/mips/include/asm/kdebug.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
new file mode 100644
index 0000000..4314892
--- /dev/null
+++ b/arch/mips/include/asm/kexec.h
@@ -0,0 +1,30 @@
+/*
+ * kexec.h for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 14:59:34 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#ifndef _MIPS_KEXEC
+# define _MIPS_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_MIPS
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	/* Dummy implementation for now */
+}
+
+#endif /* !_MIPS_KEXEC */
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
new file mode 100644
index 0000000..48223b0
--- /dev/null
+++ b/arch/mips/include/asm/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
new file mode 100644
index 0000000..806aae3
--- /dev/null
+++ b/arch/mips/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/mips/include/asm/kspd.h b/arch/mips/include/asm/kspd.h
new file mode 100644
index 0000000..4e9e724
--- /dev/null
+++ b/arch/mips/include/asm/kspd.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_KSPD_H
+#define _ASM_KSPD_H
+
+struct kspd_notifications {
+	void (*kspd_sp_exit)(int sp_id);
+
+	struct list_head list;
+};
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+extern void kspd_notify(struct kspd_notifications *notify);
+#else
+static inline void kspd_notify(struct kspd_notifications *notify)
+{
+}
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
new file mode 100644
index 0000000..edcd754
--- /dev/null
+++ b/arch/mips/include/asm/lasat/ds1603.h
@@ -0,0 +1,18 @@
+#include <asm/addrspace.h>
+
+/* Lasat 100	*/
+#define DS1603_REG_100		(KSEG1ADDR(0x1c810000))
+#define DS1603_RST_100		(1 << 2)
+#define DS1603_CLK_100		(1 << 0)
+#define DS1603_DATA_SHIFT_100	1
+#define DS1603_DATA_100		(1 << DS1603_DATA_SHIFT_100)
+
+/* Lasat 200	*/
+#define DS1603_REG_200		(KSEG1ADDR(0x11000000))
+#define DS1603_RST_200		(1 << 3)
+#define DS1603_CLK_200		(1 << 4)
+#define DS1603_DATA_200		(1 << 5)
+
+#define DS1603_DATA_REG_200		(DS1603_REG_200 + 0x10000)
+#define DS1603_DATA_READ_SHIFT_200	9
+#define DS1603_DATA_READ_200	(1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
new file mode 100644
index 0000000..3dac2036
--- /dev/null
+++ b/arch/mips/include/asm/lasat/eeprom.h
@@ -0,0 +1,17 @@
+#include <asm/addrspace.h>
+
+/* lasat 100 */
+#define AT93C_REG_100               KSEG1ADDR(0x1c810000)
+#define AT93C_RDATA_REG_100         AT93C_REG_100
+#define AT93C_RDATA_SHIFT_100       4
+#define AT93C_WDATA_SHIFT_100       4
+#define AT93C_CS_M_100              (1 << 5)
+#define AT93C_CLK_M_100             (1 << 3)
+
+/* lasat 200 */
+#define AT93C_REG_200		KSEG1ADDR(0x11000000)
+#define AT93C_RDATA_REG_200	(AT93C_REG_200+0x10000)
+#define AT93C_RDATA_SHIFT_200	8
+#define AT93C_WDATA_SHIFT_200	2
+#define AT93C_CS_M_200		(1 << 0)
+#define AT93C_CLK_M_200		(1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
new file mode 100644
index 0000000..f5589f3
--- /dev/null
+++ b/arch/mips/include/asm/lasat/head.h
@@ -0,0 +1,22 @@
+/*
+ * Image header stuff
+ */
+#ifndef _HEAD_H
+#define _HEAD_H
+
+#define LASAT_K_MAGIC0_VAL	0xfedeabba
+#define LASAT_K_MAGIC1_VAL	0x00bedead
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <linux/types.h>
+struct bootloader_header {
+	u32 magic[2];
+	u32 version;
+	u32 image_start;
+	u32 image_size;
+	u32 kernel_start;
+	u32 kernel_entry;
+};
+#endif
+
+#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
new file mode 100644
index 0000000..caeba1e
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -0,0 +1,258 @@
+/*
+ * lasat.h
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Configuration for LASAT boards, loads the appropriate include files.
+ */
+#ifndef _LASAT_H
+#define _LASAT_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern struct lasat_misc {
+	volatile u32 *reset_reg;
+	volatile u32 *flash_wp_reg;
+	u32 flash_wp_bit;
+} *lasat_misc;
+
+enum lasat_mtdparts {
+	LASAT_MTD_BOOTLOADER,
+	LASAT_MTD_SERVICE,
+	LASAT_MTD_NORMAL,
+	LASAT_MTD_CONFIG,
+	LASAT_MTD_FS,
+	LASAT_MTD_LAST
+};
+
+/*
+ * The format of the data record in the EEPROM.
+ * See Documentation/LASAT/eeprom.txt for a detailed description
+ * of the fields in this struct, and the LASAT Hardware Configuration
+ * field specification for a detailed description of the config
+ * field.
+ */
+#include <linux/types.h>
+
+#define LASAT_EEPROM_VERSION 7
+struct lasat_eeprom_struct {
+	unsigned int  version;
+	unsigned int  cfg[3];
+	unsigned char hwaddr[6];
+	unsigned char print_partno[12];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[12];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[16];
+	unsigned char pwdnull;
+	unsigned char vendid;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[11];
+	unsigned char debugaccess;
+	unsigned short prid;
+	unsigned int  serviceflag;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+struct lasat_eeprom_struct_pre7 {
+	unsigned int  version;
+	unsigned int  flags[3];
+	unsigned char hwaddr0[6];
+	unsigned char hwaddr1[6];
+	unsigned char print_partno[9];
+	unsigned char term0;
+	unsigned char print_serial[14];
+	unsigned char term1;
+	unsigned char prod_partno[9];
+	unsigned char term2;
+	unsigned char prod_serial[14];
+	unsigned char term3;
+	unsigned char passwd_hash[24];
+	unsigned char pwdnull;
+	unsigned char vendor;
+	unsigned char ts_ref;
+	unsigned char ts_signoff;
+	unsigned char reserved[6];
+	unsigned int  writecount;
+	unsigned int  ipaddr;
+	unsigned int  netmask;
+	unsigned int  crc32;
+};
+
+/* Configuration descriptor encoding - see the doc for details */
+
+#define LASAT_W0_DSCTYPE(v)		(((v))         & 0xf)
+#define LASAT_W0_BMID(v)		(((v) >> 0x04) & 0xf)
+#define LASAT_W0_CPUTYPE(v)		(((v) >> 0x08) & 0xf)
+#define LASAT_W0_BUSSPEED(v)		(((v) >> 0x0c) & 0xf)
+#define LASAT_W0_CPUCLK(v)		(((v) >> 0x10) & 0xf)
+#define LASAT_W0_SDRAMBANKSZ(v)		(((v) >> 0x14) & 0xf)
+#define LASAT_W0_SDRAMBANKS(v)		(((v) >> 0x18) & 0xf)
+#define LASAT_W0_L2CACHE(v)		(((v) >> 0x1c) & 0xf)
+
+#define LASAT_W1_EDHAC(v)		(((v))         & 0xf)
+#define LASAT_W1_HIFN(v)		(((v) >> 0x04) & 0x1)
+#define LASAT_W1_ISDN(v)		(((v) >> 0x05) & 0x1)
+#define LASAT_W1_IDE(v)			(((v) >> 0x06) & 0x1)
+#define LASAT_W1_HDLC(v)		(((v) >> 0x07) & 0x1)
+#define LASAT_W1_USVERSION(v)		(((v) >> 0x08) & 0x1)
+#define LASAT_W1_4MACS(v)		(((v) >> 0x09) & 0x1)
+#define LASAT_W1_EXTSERIAL(v)		(((v) >> 0x0a) & 0x1)
+#define LASAT_W1_FLASHSIZE(v)		(((v) >> 0x0c) & 0xf)
+#define LASAT_W1_PCISLOTS(v)		(((v) >> 0x10) & 0xf)
+#define LASAT_W1_PCI1OPT(v)		(((v) >> 0x14) & 0xf)
+#define LASAT_W1_PCI2OPT(v)		(((v) >> 0x18) & 0xf)
+#define LASAT_W1_PCI3OPT(v)		(((v) >> 0x1c) & 0xf)
+
+/* Routines specific to LASAT boards */
+
+#define LASAT_BMID_MASQUERADE2		0
+#define LASAT_BMID_MASQUERADEPRO	1
+#define LASAT_BMID_SAFEPIPE25		2
+#define LASAT_BMID_SAFEPIPE50		3
+#define LASAT_BMID_SAFEPIPE100		4
+#define LASAT_BMID_SAFEPIPE5000		5
+#define LASAT_BMID_SAFEPIPE7000		6
+#define LASAT_BMID_SAFEPIPE1000		7
+#if 0
+#define LASAT_BMID_SAFEPIPE30		7
+#define LASAT_BMID_SAFEPIPE5100		8
+#define LASAT_BMID_SAFEPIPE7100		9
+#endif
+#define LASAT_BMID_UNKNOWN		0xf
+#define LASAT_MAX_BMID_NAMES		9   /* no larger than 15! */
+
+#define LASAT_HAS_EDHAC			(1 << 0)
+#define LASAT_EDHAC_FAST		(1 << 1)
+#define LASAT_HAS_EADI			(1 << 2)
+#define LASAT_HAS_HIFN			(1 << 3)
+#define LASAT_HAS_ISDN			(1 << 4)
+#define LASAT_HAS_LEASEDLINE_IF		(1 << 5)
+#define LASAT_HAS_HDC			(1 << 6)
+
+#define LASAT_PRID_MASQUERADE2		0
+#define LASAT_PRID_MASQUERADEPRO	1
+#define LASAT_PRID_SAFEPIPE25		2
+#define LASAT_PRID_SAFEPIPE50		3
+#define LASAT_PRID_SAFEPIPE100		4
+#define LASAT_PRID_SAFEPIPE5000		5
+#define LASAT_PRID_SAFEPIPE7000		6
+#define LASAT_PRID_SAFEPIPE30		7
+#define LASAT_PRID_SAFEPIPE5100		8
+#define LASAT_PRID_SAFEPIPE7100		9
+
+#define LASAT_PRID_SAFEPIPE1110		10
+#define LASAT_PRID_SAFEPIPE3020		11
+#define LASAT_PRID_SAFEPIPE3030		12
+#define LASAT_PRID_SAFEPIPE5020		13
+#define LASAT_PRID_SAFEPIPE5030		14
+#define LASAT_PRID_SAFEPIPE1120		15
+#define LASAT_PRID_SAFEPIPE1130		16
+#define LASAT_PRID_SAFEPIPE6010		17
+#define LASAT_PRID_SAFEPIPE6110		18
+#define LASAT_PRID_SAFEPIPE6210		19
+#define LASAT_PRID_SAFEPIPE1020		20
+#define LASAT_PRID_SAFEPIPE1040		21
+#define LASAT_PRID_SAFEPIPE1060		22
+
+struct lasat_info {
+	unsigned int  li_cpu_hz;
+	unsigned int  li_bus_hz;
+	unsigned int  li_bmid;
+	unsigned int  li_memsize;
+	unsigned int  li_flash_size;
+	unsigned int  li_prid;
+	unsigned char li_bmstr[16];
+	unsigned char li_namestr[32];
+	unsigned char li_typestr[16];
+	/* Info on the Flash layout */
+	unsigned int  li_flash_base;
+	unsigned long li_flashpart_base[LASAT_MTD_LAST];
+	unsigned long li_flashpart_size[LASAT_MTD_LAST];
+	struct lasat_eeprom_struct li_eeprom_info;
+	unsigned int  li_eeprom_upgrade_version;
+	unsigned int  li_debugaccess;
+};
+
+extern struct lasat_info lasat_board_info;
+
+static inline unsigned long lasat_flash_partition_start(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_base[partno];
+}
+
+static inline unsigned long lasat_flash_partition_size(int partno)
+{
+	if (partno < 0 || partno >= LASAT_MTD_LAST)
+		return 0;
+
+	return lasat_board_info.li_flashpart_size[partno];
+}
+
+/* Called from setup() to initialize the global board_info struct */
+extern int lasat_init_board_info(void);
+
+/* Write the modified EEPROM info struct */
+extern void lasat_write_eeprom_info(void);
+
+#define N_MACHTYPES		2
+/* for calibration of delays */
+
+/* the lasat_ndelay function is necessary because it is used at an
+ * early stage of the boot process where ndelay is not calibrated.
+ * It is used for the bit-banging rtc and eeprom drivers */
+
+#include <linux/delay.h>
+
+/* calculating with the slowest board with 100 MHz clock */
+#define LASAT_100_DIVIDER 20
+/* All 200's run at 250 MHz clock */
+#define LASAT_200_DIVIDER 8
+
+extern unsigned int lasat_ndelay_divider;
+
+static inline void lasat_ndelay(unsigned int ns)
+{
+	__delay(ns / lasat_ndelay_divider);
+}
+
+#define IS_LASAT_200()     (current_cpu_data.cputype == CPU_R5000)
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#define LASAT_SERVICEMODE_MAGIC_1     0xdeadbeef
+#define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
+
+/* Lasat 100 boards */
+#define LASAT_GT_BASE           (KSEG1ADDR(0x14000000))
+
+/* Lasat 200 boards */
+#define Vrc5074_PHYS_BASE       0x1fa00000
+#define Vrc5074_BASE            (KSEG1ADDR(Vrc5074_PHYS_BASE))
+#define PCI_WINDOW1             0x1a000000
+
+#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
new file mode 100644
index 0000000..e0d2458
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasatint.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_LASAT_LASATINT_H
+#define __ASM_LASAT_LASATINT_H
+
+/* lasat 100 */
+#define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
+#define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
+#define LASATINT_MASK_SHIFT_100		0
+
+/* lasat 200 */
+#define LASAT_INT_STATUS_REG_200	(KSEG1ADDR(0x1104003c))
+#define LASAT_INT_MASK_REG_200		(KSEG1ADDR(0x1104003c))
+#define LASATINT_MASK_SHIFT_200		16
+
+#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
new file mode 100644
index 0000000..42a492e
--- /dev/null
+++ b/arch/mips/include/asm/lasat/picvue.h
@@ -0,0 +1,15 @@
+/* Lasat 100 */
+#define PVC_REG_100		KSEG1ADDR(0x1c820000)
+#define PVC_DATA_SHIFT_100	0
+#define PVC_DATA_M_100		0xFF
+#define PVC_E_100		(1 << 8)
+#define PVC_RW_100		(1 << 9)
+#define PVC_RS_100		(1 << 10)
+
+/* Lasat 200 */
+#define PVC_REG_200		KSEG1ADDR(0x11000000)
+#define PVC_DATA_SHIFT_200	24
+#define PVC_DATA_M_200		(0xFF << PVC_DATA_SHIFT_200)
+#define PVC_E_200		(1 << 16)
+#define PVC_RW_200		(1 << 17)
+#define PVC_RS_200		(1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
new file mode 100644
index 0000000..1c37d70
--- /dev/null
+++ b/arch/mips/include/asm/lasat/serial.h
@@ -0,0 +1,13 @@
+#include <asm/lasat/lasat.h>
+
+/* Lasat 100 boards serial configuration */
+#define LASAT_BASE_BAUD_100 		(7372800 / 16)
+#define LASAT_UART_REGS_BASE_100	0x1c8b0000
+#define LASAT_UART_REGS_SHIFT_100	2
+#define LASATINT_UART_100		16
+
+/* * LASAT 200 boards serial configuration */
+#define LASAT_BASE_BAUD_200		(100000000 / 16 / 12)
+#define LASAT_UART_REGS_BASE_200	(Vrc5074_PHYS_BASE + 0x0300)
+#define LASAT_UART_REGS_SHIFT_200	3
+#define LASATINT_UART_200		21
diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h
new file mode 100644
index 0000000..e9a940d
--- /dev/null
+++ b/arch/mips/include/asm/linkage.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifdef __ASSEMBLY__
+#include <asm/asm.h>
+#endif
+
+#define __weak __attribute__((weak))
+
+#endif
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
new file mode 100644
index 0000000..f96fd59
--- /dev/null
+++ b/arch/mips/include/asm/local.h
@@ -0,0 +1,221 @@
+#ifndef _ARCH_MIPS_LOCAL_H
+#define _ARCH_MIPS_LOCAL_H
+
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/cmpxchg.h>
+#include <asm/war.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
+
+#define local_add(i, l)	atomic_long_add((i), (&(l)->a))
+#define local_sub(i, l)	atomic_long_sub((i), (&(l)->a))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long local_add_return(long i, local_t * l)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_add_return	\n"
+		"	addu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	addu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		result = l->a.counter;
+		result += i;
+		l->a.counter = result;
+		local_irq_restore(flags);
+	}
+
+	return result;
+}
+
+static __inline__ long local_sub_return(long i, local_t * l)
+{
+	unsigned long result;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqzl	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long temp;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:"	__LL	"%1, %2		# local_sub_return	\n"
+		"	subu	%0, %1, %3				\n"
+			__SC	"%0, %2					\n"
+		"	beqz	%0, 1b					\n"
+		"	subu	%0, %1, %3				\n"
+		"	.set	mips0					\n"
+		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+		: "Ir" (i), "m" (l->a.counter)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		result = l->a.counter;
+		result -= i;
+		l->a.counter = result;
+		local_irq_restore(flags);
+	}
+
+	return result;
+}
+
+#define local_cmpxchg(l, o, n) \
+	((long)cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u)				\
+({								\
+	long c, old;						\
+	c = local_read(l);					\
+	while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_dec_return(l) local_sub_return(1, (l))
+#define local_inc_return(l) local_add_return(1, (l))
+
+/*
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0)
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+/*
+ * local_dec_and_test - decrement by 1 and test
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
+
+/*
+ * local_add_negative - add and test if negative
+ * @l: pointer of type local_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define local_add_negative(i, l) (local_add_return(i, (l)) < 0)
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i, l)	((l)->a.counter+=(i))
+#define __local_sub(i, l)	((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)	 	\
+	({ local_t res__;		\
+	   preempt_disable(); 		\
+	   res__ = (l);			\
+	   preempt_enable();		\
+	   res__; })
+#define cpu_local_wrap(l)		\
+	({ preempt_disable();		\
+	   l;				\
+	   preempt_enable(); })		\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l)	cpu_local_inc(l)
+#define __cpu_local_dec(l)	cpu_local_dec(l)
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ARCH_MIPS_LOCAL_H */
diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h
new file mode 100644
index 0000000..f44852e
--- /dev/null
+++ b/arch/mips/include/asm/m48t35.h
@@ -0,0 +1,27 @@
+/*
+ *  Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T35_H
+#define _ASM_M48T35_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t35_rtc {
+	volatile u8	pad[0x7ff8];    /* starts at 0x7ff8 */
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T35_RTC_SET		0x80
+#define M48T35_RTC_STOPPED	0x80
+#define M48T35_RTC_READ		0x40
+
+#endif /* _ASM_M48T35_H */
diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h
new file mode 100644
index 0000000..cabf862
--- /dev/null
+++ b/arch/mips/include/asm/m48t37.h
@@ -0,0 +1,35 @@
+/*
+ *  Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T37_H
+#define _ASM_M48T37_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t37_rtc {
+	volatile u8	pad[0x7ff0];    /* NVRAM */
+	volatile u8	flags;
+	volatile u8	century;
+	volatile u8	alarm_sec;
+	volatile u8	alarm_min;
+	volatile u8	alarm_hour;
+	volatile u8	alarm_data;
+	volatile u8	interrupts;
+	volatile u8	watchdog;
+	volatile u8	control;
+	volatile u8	sec;
+	volatile u8	min;
+	volatile u8	hour;
+	volatile u8	day;
+	volatile u8	date;
+	volatile u8	month;
+	volatile u8	year;
+};
+
+#define M48T37_RTC_SET		0x80
+#define M48T37_RTC_STOPPED	0x80
+#define M48T37_RTC_READ		0x40
+
+#endif /* _ASM_M48T37_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
new file mode 100644
index 0000000..0d302ba
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -0,0 +1,1772 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+  * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+  */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
+/* cpu pipeline flush */
+void static inline au_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+void static inline au_sync_udelay(int us)
+{
+	__asm__ volatile ("sync");
+	udelay(us);
+}
+
+void static inline au_sync_delay(int ms)
+{
+	__asm__ volatile ("sync");
+	mdelay(ms);
+}
+
+void static inline au_writeb(u8 val, unsigned long reg)
+{
+	*(volatile u8 *)reg = val;
+}
+
+void static inline au_writew(u16 val, unsigned long reg)
+{
+	*(volatile u16 *)reg = val;
+}
+
+void static inline au_writel(u32 val, unsigned long reg)
+{
+	*(volatile u32 *)reg = val;
+}
+
+static inline u8 au_readb(unsigned long reg)
+{
+	return *(volatile u8 *)reg;
+}
+
+static inline u16 au_readw(unsigned long reg)
+{
+	return *(volatile u16 *)reg;
+}
+
+static inline u32 au_readl(unsigned long reg)
+{
+	return *(volatile u32 *)reg;
+}
+
+
+/* arch/mips/au1000/common/clocks.c */
+extern void set_au1x00_speed(unsigned int new_freq);
+extern unsigned int get_au1x00_speed(void);
+extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern void set_au1x00_lcd_clock(void);
+extern unsigned int get_au1x00_lcd_clock(void);
+
+/*
+ * Every board describes its IRQ mapping with this table.
+ */
+struct au1xxx_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_request;
+};
+
+/*
+ * init_IRQ looks for a table with this name.
+ */
+extern struct au1xxx_irqmap au1xxx_irq_map[];
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+/*
+ * SDRAM register offsets
+ */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+    defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0		0x0000
+#define MEM_SDMODE1		0x0004
+#define MEM_SDMODE2		0x0008
+#define MEM_SDADDR0		0x000C
+#define MEM_SDADDR1		0x0010
+#define MEM_SDADDR2		0x0014
+#define MEM_SDREFCFG		0x0018
+#define MEM_SDPRECMD		0x001C
+#define MEM_SDAUTOREF		0x0020
+#define MEM_SDWRMD0		0x0024
+#define MEM_SDWRMD1		0x0028
+#define MEM_SDWRMD2		0x002C
+#define MEM_SDSLEEP		0x0030
+#define MEM_SDSMCKE		0x0034
+
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F		(1 << 22)
+#define MEM_SDMODE_SR		(1 << 21)
+#define MEM_SDMODE_BS		(1 << 20)
+#define MEM_SDMODE_RS		(3 << 18)
+#define MEM_SDMODE_CS		(7 << 15)
+#define MEM_SDMODE_TRAS 	(15 << 11)
+#define MEM_SDMODE_TMRD 	(3 << 9)
+#define MEM_SDMODE_TWR		(3 << 7)
+#define MEM_SDMODE_TRP		(3 << 5)
+#define MEM_SDMODE_TRCD 	(3 << 3)
+#define MEM_SDMODE_TCL		(7 << 0)
+
+#define MEM_SDMODE_BS_2Bank	(0 << 20)
+#define MEM_SDMODE_BS_4Bank	(1 << 20)
+#define MEM_SDMODE_RS_11Row	(0 << 18)
+#define MEM_SDMODE_RS_12Row	(1 << 18)
+#define MEM_SDMODE_RS_13Row	(2 << 18)
+#define MEM_SDMODE_RS_N(N)	((N) << 18)
+#define MEM_SDMODE_CS_7Col	(0 << 15)
+#define MEM_SDMODE_CS_8Col	(1 << 15)
+#define MEM_SDMODE_CS_9Col	(2 << 15)
+#define MEM_SDMODE_CS_10Col	(3 << 15)
+#define MEM_SDMODE_CS_11Col	(4 << 15)
+#define MEM_SDMODE_CS_N(N)	((N) << 15)
+#define MEM_SDMODE_TRAS_N(N)	((N) << 11)
+#define MEM_SDMODE_TMRD_N(N)	((N) << 9)
+#define MEM_SDMODE_TWR_N(N)	((N) << 7)
+#define MEM_SDMODE_TRP_N(N)	((N) << 5)
+#define MEM_SDMODE_TRCD_N(N)	((N) << 3)
+#define MEM_SDMODE_TCL_N(N)	((N) << 0)
+
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E		(1 << 20)
+#define MEM_SDADDR_CSBA 	(0x03FF << 10)
+#define MEM_SDADDR_CSMASK	(0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
+
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC	(15 << 28)
+#define MEM_SDREFCFG_TRPM	(3 << 26)
+#define MEM_SDREFCFG_E		(1 << 25)
+#define MEM_SDREFCFG_RE 	(0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N)	(N)
+#endif
+
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0		0x0800
+#define MEM_SDMODE1		0x0808
+#define MEM_SDMODE2		0x0810
+#define MEM_SDADDR0		0x0820
+#define MEM_SDADDR1		0x0828
+#define MEM_SDADDR2		0x0830
+#define MEM_SDCONFIGA		0x0840
+#define MEM_SDCONFIGB		0x0848
+#define MEM_SDSTAT		0x0850
+#define MEM_SDERRADDR		0x0858
+#define MEM_SDSTRIDE0		0x0860
+#define MEM_SDSTRIDE1		0x0868
+#define MEM_SDSTRIDE2		0x0870
+#define MEM_SDWRMD0		0x0880
+#define MEM_SDWRMD1		0x0888
+#define MEM_SDWRMD2		0x0890
+#define MEM_SDPRECMD		0x08C0
+#define MEM_SDAUTOREF		0x08C8
+#define MEM_SDSREF		0x08D0
+#define MEM_SDSLEEP		MEM_SDSREF
+
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART2_PHYS_ADDR		0x11300000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x11500000
+#define	MAC1_PHYS_ADDR		0x11510000
+#define	MACEN_PHYS_ADDR		0x11520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define PCI_MEM_PHYS_ADDR	0x400000000ULL
+#define PCI_IO_PHYS_ADDR	0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	DMA0_PHYS_ADDR		0x14002000
+#define	DMA1_PHYS_ADDR		0x14002100
+#define	DMA2_PHYS_ADDR		0x14002200
+#define	DMA3_PHYS_ADDR		0x14002300
+#define	DMA4_PHYS_ADDR		0x14002400
+#define	DMA5_PHYS_ADDR		0x14002500
+#define	DMA6_PHYS_ADDR		0x14002600
+#define	DMA7_PHYS_ADDR		0x14002700
+#define	IC0_PHYS_ADDR		0x10400000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	AC97_PHYS_ADDR		0x10000000
+#define	USBH_PHYS_ADDR		0x10100000
+#define	USBD_PHYS_ADDR		0x10200000
+#define	IRDA_PHYS_ADDR		0x10300000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	I2S_PHYS_ADDR		0x11000000
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define	SSI0_PHYS_ADDR		0x11600000
+#define	SSI1_PHYS_ADDR		0x11680000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define LCD_PHYS_ADDR		0x15000000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define	USBH_PHYS_ADDR		0x14020000
+#define	USBD_PHYS_ADDR		0x10200000
+#define PCI_PHYS_ADDR		0x14005000
+#define	MAC0_PHYS_ADDR		0x10500000
+#define	MAC1_PHYS_ADDR		0x10510000
+#define	MACEN_PHYS_ADDR		0x10520000
+#define	MACDMA0_PHYS_ADDR	0x14004000
+#define	MACDMA1_PHYS_ADDR	0x14004200
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define	UART3_PHYS_ADDR		0x11400000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PE_PHYS_ADDR		0x14008000
+#define PSC0_PHYS_ADDR		0x11A00000
+#define PSC1_PHYS_ADDR		0x11B00000
+#define PSC2_PHYS_ADDR		0x10A00000
+#define PSC3_PHYS_ADDR		0x10B00000
+#define PCI_MEM_PHYS_ADDR	0x400000000ULL
+#define PCI_IO_PHYS_ADDR	0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define	MEM_PHYS_ADDR		0x14000000
+#define	STATIC_MEM_PHYS_ADDR	0x14001000
+#define AES_PHYS_ADDR		0x10300000
+#define CIM_PHYS_ADDR		0x14004000
+#define	IC0_PHYS_ADDR		0x10400000
+#define	IC1_PHYS_ADDR		0x11800000
+#define USBM_PHYS_ADDR		0x14020000
+#define	USBH_PHYS_ADDR		0x14020100
+#define	UART0_PHYS_ADDR		0x11100000
+#define	UART1_PHYS_ADDR		0x11200000
+#define GPIO2_PHYS_ADDR		0x11700000
+#define	SYS_PHYS_ADDR		0x11900000
+#define	DDMA_PHYS_ADDR		0x14002000
+#define PSC0_PHYS_ADDR	 	0x11A00000
+#define PSC1_PHYS_ADDR	 	0x11B00000
+#define SD0_PHYS_ADDR		0x10600000
+#define SD1_PHYS_ADDR		0x10680000
+#define LCD_PHYS_ADDR		0x15000000
+#define SWCNT_PHYS_ADDR		0x1110010C
+#define MAEFE_PHYS_ADDR		0x14012000
+#define MAEBE_PHYS_ADDR		0x14010000
+#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
+#endif
+
+/* Static Bus Controller */
+#define MEM_STCFG0		0xB4001000
+#define MEM_STTIME0		0xB4001004
+#define MEM_STADDR0		0xB4001008
+
+#define MEM_STCFG1		0xB4001010
+#define MEM_STTIME1		0xB4001014
+#define MEM_STADDR1		0xB4001018
+
+#define MEM_STCFG2		0xB4001020
+#define MEM_STTIME2		0xB4001024
+#define MEM_STADDR2		0xB4001028
+
+#define MEM_STCFG3		0xB4001030
+#define MEM_STTIME3		0xB4001034
+#define MEM_STADDR3		0xB4001038
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_STNDCTL		0xB4001100
+#define MEM_STSTAT		0xB4001104
+
+#define MEM_STNAND_CMD		0x0
+#define MEM_STNAND_ADDR 	0x4
+#define MEM_STNAND_DATA 	0x20
+#endif
+
+/* Interrupt Controller 0 */
+#define IC0_CFG0RD		0xB0400040
+#define IC0_CFG0SET		0xB0400040
+#define IC0_CFG0CLR		0xB0400044
+
+#define IC0_CFG1RD		0xB0400048
+#define IC0_CFG1SET		0xB0400048
+#define IC0_CFG1CLR		0xB040004C
+
+#define IC0_CFG2RD		0xB0400050
+#define IC0_CFG2SET		0xB0400050
+#define IC0_CFG2CLR		0xB0400054
+
+#define IC0_REQ0INT		0xB0400054
+#define IC0_SRCRD		0xB0400058
+#define IC0_SRCSET		0xB0400058
+#define IC0_SRCCLR		0xB040005C
+#define IC0_REQ1INT		0xB040005C
+
+#define IC0_ASSIGNRD		0xB0400060
+#define IC0_ASSIGNSET		0xB0400060
+#define IC0_ASSIGNCLR		0xB0400064
+
+#define IC0_WAKERD		0xB0400068
+#define IC0_WAKESET		0xB0400068
+#define IC0_WAKECLR		0xB040006C
+
+#define IC0_MASKRD		0xB0400070
+#define IC0_MASKSET		0xB0400070
+#define IC0_MASKCLR		0xB0400074
+
+#define IC0_RISINGRD		0xB0400078
+#define IC0_RISINGCLR		0xB0400078
+#define IC0_FALLINGRD		0xB040007C
+#define IC0_FALLINGCLR		0xB040007C
+
+#define IC0_TESTBIT		0xB0400080
+
+/* Interrupt Controller 1 */
+#define IC1_CFG0RD		0xB1800040
+#define IC1_CFG0SET		0xB1800040
+#define IC1_CFG0CLR		0xB1800044
+
+#define IC1_CFG1RD		0xB1800048
+#define IC1_CFG1SET		0xB1800048
+#define IC1_CFG1CLR		0xB180004C
+
+#define IC1_CFG2RD		0xB1800050
+#define IC1_CFG2SET		0xB1800050
+#define IC1_CFG2CLR		0xB1800054
+
+#define IC1_REQ0INT		0xB1800054
+#define IC1_SRCRD		0xB1800058
+#define IC1_SRCSET		0xB1800058
+#define IC1_SRCCLR		0xB180005C
+#define IC1_REQ1INT		0xB180005C
+
+#define IC1_ASSIGNRD            0xB1800060
+#define IC1_ASSIGNSET           0xB1800060
+#define IC1_ASSIGNCLR           0xB1800064
+
+#define IC1_WAKERD		0xB1800068
+#define IC1_WAKESET		0xB1800068
+#define IC1_WAKECLR		0xB180006C
+
+#define IC1_MASKRD		0xB1800070
+#define IC1_MASKSET		0xB1800070
+#define IC1_MASKCLR		0xB1800074
+
+#define IC1_RISINGRD		0xB1800078
+#define IC1_RISINGCLR		0xB1800078
+#define IC1_FALLINGRD		0xB180007C
+#define IC1_FALLINGCLR		0xB180007C
+
+#define IC1_TESTBIT		0xB1800080
+
+/* Interrupt Configuration Modes */
+#define INTC_INT_DISABLED		0x0
+#define INTC_INT_RISE_EDGE		0x1
+#define INTC_INT_FALL_EDGE		0x2
+#define INTC_INT_RISE_AND_FALL_EDGE	0x3
+#define INTC_INT_HIGH_LEVEL		0x5
+#define INTC_INT_LOW_LEVEL		0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL	0x7
+
+/* Interrupt Numbers */
+/* Au1000 */
+#ifdef CONFIG_SOC_AU1000
+enum soc_au1000_ints {
+	AU1000_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1000_UART0_INT	= AU1000_FIRST_INT,
+	AU1000_UART1_INT,				/* au1000 */
+	AU1000_UART2_INT,				/* au1000 */
+	AU1000_UART3_INT,
+	AU1000_SSI0_INT,				/* au1000 */
+	AU1000_SSI1_INT,				/* au1000 */
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,				/* au1000 */
+	AU1000_IRDA_RX_INT,				/* au1000 */
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1000_MAC0_DMA_INT,
+	AU1000_MAC1_DMA_INT,
+	AU1000_I2S_UO_INT,				/* au1000 */
+	AU1000_AC97C_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART2_ADDR		0xB1300000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017FFFC
+
+#define AU1000_ETH0_BASE	0xB0500000
+#define AU1000_ETH1_BASE	0xB0510000
+#define AU1000_MAC0_ENABLE	0xB0520000
+#define AU1000_MAC1_ENABLE	0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1000 */
+
+/* Au1500 */
+#ifdef CONFIG_SOC_AU1500
+enum soc_au1500_ints {
+	AU1500_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1500_UART0_INT	= AU1500_FIRST_INT,
+	AU1000_PCI_INTA,				/* au1500 */
+	AU1000_PCI_INTB,				/* au1500 */
+	AU1500_UART3_INT,
+	AU1000_PCI_INTC,				/* au1500 */
+	AU1000_PCI_INTD,				/* au1500 */
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1500_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1500_PCI_ERR_INT,
+	AU1500_RESERVED_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1500_MAC0_DMA_INT,
+	AU1500_MAC1_DMA_INT,
+	AU1000_AC97C_INT	= AU1500_FIRST_INT + 31,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1500_GPIO_200,
+	AU1500_GPIO_201,
+	AU1500_GPIO_202,
+	AU1500_GPIO_203,
+	AU1500_GPIO_20,
+	AU1500_GPIO_204,
+	AU1500_GPIO_205,
+	AU1500_GPIO_23,
+	AU1500_GPIO_24,
+	AU1500_GPIO_25,
+	AU1500_GPIO_26,
+	AU1500_GPIO_27,
+	AU1500_GPIO_28,
+	AU1500_GPIO_206,
+	AU1500_GPIO_207,
+	AU1500_GPIO_208_215,
+};
+
+/* shortcuts */
+#define INTA AU1000_PCI_INTA
+#define INTB AU1000_PCI_INTB
+#define INTC AU1000_PCI_INTC
+#define INTD AU1000_PCI_INTD
+
+#define UART0_ADDR		0xB1100000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017fffc
+
+#define AU1500_ETH0_BASE	0xB1500000
+#define AU1500_ETH1_BASE	0xB1510000
+#define AU1500_MAC0_ENABLE	0xB1520000
+#define AU1500_MAC1_ENABLE	0xB1520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1500 */
+
+/* Au1100 */
+#ifdef CONFIG_SOC_AU1100
+enum soc_au1100_ints {
+	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1100_UART0_INT,
+	AU1100_UART1_INT,
+	AU1100_SD_INT,
+	AU1100_UART3_INT,
+	AU1000_SSI0_INT,
+	AU1000_SSI1_INT,
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1100_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,
+	AU1000_IRDA_RX_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1100_MAC0_DMA_INT,
+	AU1100_GPIO_208_215,
+	AU1100_LCD_INT,
+	AU1000_AC97C_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
+#define USB_HOST_CONFIG 	0xB017FFFC
+
+#define AU1100_ETH0_BASE	0xB0500000
+#define AU1100_MAC0_ENABLE	0xB0520000
+#define NUM_ETH_INTERFACES 1
+#endif /* CONFIG_SOC_AU1100 */
+
+#ifdef CONFIG_SOC_AU1550
+enum soc_au1550_ints {
+	AU1550_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1550_UART0_INT	= AU1550_FIRST_INT,
+	AU1550_PCI_INTA,
+	AU1550_PCI_INTB,
+	AU1550_DDMA_INT,
+	AU1550_CRYPTO_INT,
+	AU1550_PCI_INTC,
+	AU1550_PCI_INTD,
+	AU1550_PCI_RST_INT,
+	AU1550_UART1_INT,
+	AU1550_UART3_INT,
+	AU1550_PSC0_INT,
+	AU1550_PSC1_INT,
+	AU1550_PSC2_INT,
+	AU1550_PSC3_INT,
+	AU1000_TOY_INT,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+
+	AU1550_NAND_INT			= AU1550_FIRST_INT + 23,
+	AU1550_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_REQ_INT		= AU1550_USB_DEV_REQ_INT,
+	AU1550_USB_DEV_SUS_INT,
+	AU1000_USB_DEV_SUS_INT		= AU1550_USB_DEV_SUS_INT,
+	AU1550_USB_HOST_INT,
+	AU1000_USB_HOST_INT		= AU1550_USB_HOST_INT,
+	AU1550_MAC0_DMA_INT,
+	AU1550_MAC1_DMA_INT,
+	AU1000_GPIO_0			= AU1550_FIRST_INT + 32,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1550_GPIO_200,
+	AU1500_GPIO_201_205,			/* Logical or of GPIO201:205 */
+	AU1500_GPIO_16,
+	AU1500_GPIO_17,
+	AU1500_GPIO_20,
+	AU1500_GPIO_21,
+	AU1500_GPIO_22,
+	AU1500_GPIO_23,
+	AU1500_GPIO_24,
+	AU1500_GPIO_25,
+	AU1500_GPIO_26,
+	AU1500_GPIO_27,
+	AU1500_GPIO_28,
+	AU1500_GPIO_206,
+	AU1500_GPIO_207,
+	AU1500_GPIO_208_218,			/* Logical or of GPIO208:218 */
+};
+
+/* shortcuts */
+#define INTA AU1550_PCI_INTA
+#define INTB AU1550_PCI_INTB
+#define INTC AU1550_PCI_INTC
+#define INTD AU1550_PCI_INTD
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+#define UART3_ADDR		0xB1400000
+
+#define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
+#define USB_OHCI_LEN		0x00060000
+#define USB_HOST_CONFIG 	0xB4027ffc
+
+#define AU1550_ETH0_BASE	0xB0500000
+#define AU1550_ETH1_BASE	0xB0510000
+#define AU1550_MAC0_ENABLE	0xB0520000
+#define AU1550_MAC1_ENABLE	0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+enum soc_au1200_ints {
+	AU1200_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
+	AU1200_UART0_INT	= AU1200_FIRST_INT,
+	AU1200_SWT_INT,
+	AU1200_SD_INT,
+	AU1200_DDMA_INT,
+	AU1200_MAE_BE_INT,
+	AU1200_GPIO_200,
+	AU1200_GPIO_201,
+	AU1200_GPIO_202,
+	AU1200_UART1_INT,
+	AU1200_MAE_FE_INT,
+	AU1200_PSC0_INT,
+	AU1200_PSC1_INT,
+	AU1200_AES_INT,
+	AU1200_CAMERA_INT,
+	AU1000_TOY_INT,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+
+	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_204,
+	AU1200_GPIO_205,
+	AU1200_GPIO_206,
+	AU1200_GPIO_207,
+	AU1200_GPIO_208_215,			/* Logical OR of 208:215 */
+	AU1200_USB_INT,
+	AU1000_USB_HOST_INT	= AU1200_USB_INT,
+	AU1200_LCD_INT,
+	AU1200_MAE_BOTH_INT,
+	AU1000_GPIO_0,
+	AU1000_GPIO_1,
+	AU1000_GPIO_2,
+	AU1000_GPIO_3,
+	AU1000_GPIO_4,
+	AU1000_GPIO_5,
+	AU1000_GPIO_6,
+	AU1000_GPIO_7,
+	AU1000_GPIO_8,
+	AU1000_GPIO_9,
+	AU1000_GPIO_10,
+	AU1000_GPIO_11,
+	AU1000_GPIO_12,
+	AU1000_GPIO_13,
+	AU1000_GPIO_14,
+	AU1000_GPIO_15,
+	AU1000_GPIO_16,
+	AU1000_GPIO_17,
+	AU1000_GPIO_18,
+	AU1000_GPIO_19,
+	AU1000_GPIO_20,
+	AU1000_GPIO_21,
+	AU1000_GPIO_22,
+	AU1000_GPIO_23,
+	AU1000_GPIO_24,
+	AU1000_GPIO_25,
+	AU1000_GPIO_26,
+	AU1000_GPIO_27,
+	AU1000_GPIO_28,
+	AU1000_GPIO_29,
+	AU1000_GPIO_30,
+	AU1000_GPIO_31,
+};
+
+#define UART0_ADDR		0xB1100000
+#define UART1_ADDR		0xB1200000
+
+#define USB_UOC_BASE		0x14020020
+#define USB_UOC_LEN		0x20
+#define USB_OHCI_BASE		0x14020100
+#define USB_OHCI_LEN		0x100
+#define USB_EHCI_BASE		0x14020200
+#define USB_EHCI_LEN		0x100
+#define USB_UDC_BASE		0x14022000
+#define USB_UDC_LEN		0x2000
+#define USB_MSR_BASE		0xB4020000
+#define USB_MSR_MCFG		4
+#define USBMSRMCFG_OMEMEN	0
+#define USBMSRMCFG_OBMEN	1
+#define USBMSRMCFG_EMEMEN	2
+#define USBMSRMCFG_EBMEN	3
+#define USBMSRMCFG_DMEMEN	4
+#define USBMSRMCFG_DBMEN	5
+#define USBMSRMCFG_GMEMEN	6
+#define USBMSRMCFG_OHCCLKEN	16
+#define USBMSRMCFG_EHCCLKEN	17
+#define USBMSRMCFG_UDCCLKEN	18
+#define USBMSRMCFG_PHYPLLEN	19
+#define USBMSRMCFG_RDCOMB	30
+#define USBMSRMCFG_PFEN 	31
+
+#endif /* CONFIG_SOC_AU1200 */
+
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_BASE + 32)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+
+#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
+#define INTX			0xFF			/* not valid */
+
+/* Programmable Counters 0 and 1 */
+#define SYS_BASE		0xB1900000
+#define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
+#  define SYS_CNTRL_E1S 	(1 << 23)
+#  define SYS_CNTRL_T1S 	(1 << 20)
+#  define SYS_CNTRL_M21 	(1 << 19)
+#  define SYS_CNTRL_M11 	(1 << 18)
+#  define SYS_CNTRL_M01 	(1 << 17)
+#  define SYS_CNTRL_C1S 	(1 << 16)
+#  define SYS_CNTRL_BP		(1 << 14)
+#  define SYS_CNTRL_EN1 	(1 << 13)
+#  define SYS_CNTRL_BT1 	(1 << 12)
+#  define SYS_CNTRL_EN0 	(1 << 11)
+#  define SYS_CNTRL_BT0 	(1 << 10)
+#  define SYS_CNTRL_E0		(1 << 8)
+#  define SYS_CNTRL_E0S 	(1 << 7)
+#  define SYS_CNTRL_32S 	(1 << 5)
+#  define SYS_CNTRL_T0S 	(1 << 4)
+#  define SYS_CNTRL_M20 	(1 << 3)
+#  define SYS_CNTRL_M10 	(1 << 2)
+#  define SYS_CNTRL_M00 	(1 << 1)
+#  define SYS_CNTRL_C0S 	(1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM		(SYS_BASE + 0)
+#define SYS_TOYWRITE		(SYS_BASE + 4)
+#define SYS_TOYMATCH0		(SYS_BASE + 8)
+#define SYS_TOYMATCH1		(SYS_BASE + 0xC)
+#define SYS_TOYMATCH2		(SYS_BASE + 0x10)
+#define SYS_TOYREAD		(SYS_BASE + 0x40)
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM		(SYS_BASE + 0x44)
+#define SYS_RTCWRITE		(SYS_BASE + 0x48)
+#define SYS_RTCMATCH0		(SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1		(SYS_BASE + 0x50)
+#define SYS_RTCMATCH2		(SYS_BASE + 0x54)
+#define SYS_RTCREAD		(SYS_BASE + 0x58)
+
+/* I2S Controller */
+#define I2S_DATA		0xB1000000
+#  define I2S_DATA_MASK 	0xffffff
+#define I2S_CONFIG		0xB1000004
+#  define I2S_CONFIG_XU 	(1 << 25)
+#  define I2S_CONFIG_XO 	(1 << 24)
+#  define I2S_CONFIG_RU 	(1 << 23)
+#  define I2S_CONFIG_RO 	(1 << 22)
+#  define I2S_CONFIG_TR 	(1 << 21)
+#  define I2S_CONFIG_TE 	(1 << 20)
+#  define I2S_CONFIG_TF 	(1 << 19)
+#  define I2S_CONFIG_RR 	(1 << 18)
+#  define I2S_CONFIG_RE 	(1 << 17)
+#  define I2S_CONFIG_RF 	(1 << 16)
+#  define I2S_CONFIG_PD 	(1 << 11)
+#  define I2S_CONFIG_LB 	(1 << 10)
+#  define I2S_CONFIG_IC 	(1 << 9)
+#  define I2S_CONFIG_FM_BIT	7
+#  define I2S_CONFIG_FM_MASK	(0x3 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_I2S	(0x0 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_LJ	(0x1 << I2S_CONFIG_FM_BIT)
+#    define I2S_CONFIG_FM_RJ	(0x2 << I2S_CONFIG_FM_BIT)
+#  define I2S_CONFIG_TN 	(1 << 6)
+#  define I2S_CONFIG_RN 	(1 << 5)
+#  define I2S_CONFIG_SZ_BIT	0
+#  define I2S_CONFIG_SZ_MASK	(0x1F << I2S_CONFIG_SZ_BIT)
+
+#define I2S_CONTROL		0xB1000008
+#  define I2S_CONTROL_D 	(1 << 1)
+#  define I2S_CONTROL_CE	(1 << 0)
+
+/* USB Host Controller */
+#ifndef USB_OHCI_LEN
+#define USB_OHCI_LEN		0x00100000
+#endif
+
+#ifndef CONFIG_SOC_AU1200
+
+/* USB Device Controller */
+#define USBD_EP0RD		0xB0200000
+#define USBD_EP0WR		0xB0200004
+#define USBD_EP2WR		0xB0200008
+#define USBD_EP3WR		0xB020000C
+#define USBD_EP4RD		0xB0200010
+#define USBD_EP5RD		0xB0200014
+#define USBD_INTEN		0xB0200018
+#define USBD_INTSTAT		0xB020001C
+#  define USBDEV_INT_SOF	(1 << 12)
+#  define USBDEV_INT_HF_BIT	6
+#  define USBDEV_INT_HF_MASK	(0x3f << USBDEV_INT_HF_BIT)
+#  define USBDEV_INT_CMPLT_BIT	0
+#  define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
+#define USBD_CONFIG		0xB0200020
+#define USBD_EP0CS		0xB0200024
+#define USBD_EP2CS		0xB0200028
+#define USBD_EP3CS		0xB020002C
+#define USBD_EP4CS		0xB0200030
+#define USBD_EP5CS		0xB0200034
+#  define USBDEV_CS_SU		(1 << 14)
+#  define USBDEV_CS_NAK 	(1 << 13)
+#  define USBDEV_CS_ACK 	(1 << 12)
+#  define USBDEV_CS_BUSY	(1 << 11)
+#  define USBDEV_CS_TSIZE_BIT	1
+#  define USBDEV_CS_TSIZE_MASK	(0x3ff << USBDEV_CS_TSIZE_BIT)
+#  define USBDEV_CS_STALL	(1 << 0)
+#define USBD_EP0RDSTAT		0xB0200040
+#define USBD_EP0WRSTAT		0xB0200044
+#define USBD_EP2WRSTAT		0xB0200048
+#define USBD_EP3WRSTAT		0xB020004C
+#define USBD_EP4RDSTAT		0xB0200050
+#define USBD_EP5RDSTAT		0xB0200054
+#  define USBDEV_FSTAT_FLUSH	(1 << 6)
+#  define USBDEV_FSTAT_UF	(1 << 5)
+#  define USBDEV_FSTAT_OF	(1 << 4)
+#  define USBDEV_FSTAT_FCNT_BIT 0
+#  define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
+#define USBD_ENABLE		0xB0200058
+#  define USBDEV_ENABLE 	(1 << 1)
+#  define USBDEV_CE		(1 << 0)
+
+#endif /* !CONFIG_SOC_AU1200 */
+
+/* Ethernet Controllers  */
+
+/* 4 byte offsets from AU1000_ETH_BASE */
+#define MAC_CONTROL		0x0
+#  define MAC_RX_ENABLE 	(1 << 2)
+#  define MAC_TX_ENABLE 	(1 << 3)
+#  define MAC_DEF_CHECK 	(1 << 5)
+#  define MAC_SET_BL(X) 	(((X) & 0x3) << 6)
+#  define MAC_AUTO_PAD		(1 << 8)
+#  define MAC_DISABLE_RETRY	(1 << 10)
+#  define MAC_DISABLE_BCAST	(1 << 11)
+#  define MAC_LATE_COL		(1 << 12)
+#  define MAC_HASH_MODE 	(1 << 13)
+#  define MAC_HASH_ONLY 	(1 << 15)
+#  define MAC_PASS_ALL		(1 << 16)
+#  define MAC_INVERSE_FILTER	(1 << 17)
+#  define MAC_PROMISCUOUS	(1 << 18)
+#  define MAC_PASS_ALL_MULTI	(1 << 19)
+#  define MAC_FULL_DUPLEX	(1 << 20)
+#  define MAC_NORMAL_MODE	0
+#  define MAC_INT_LOOPBACK	(1 << 21)
+#  define MAC_EXT_LOOPBACK	(1 << 22)
+#  define MAC_DISABLE_RX_OWN	(1 << 23)
+#  define MAC_BIG_ENDIAN	(1 << 30)
+#  define MAC_RX_ALL		(1 << 31)
+#define MAC_ADDRESS_HIGH	0x4
+#define MAC_ADDRESS_LOW		0x8
+#define MAC_MCAST_HIGH		0xC
+#define MAC_MCAST_LOW		0x10
+#define MAC_MII_CNTRL		0x14
+#  define MAC_MII_BUSY		(1 << 0)
+#  define MAC_MII_READ		0
+#  define MAC_MII_WRITE		(1 << 1)
+#  define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+#  define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA		0x18
+#define MAC_FLOW_CNTRL		0x1C
+#  define MAC_FLOW_CNTRL_BUSY	(1 << 0)
+#  define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+#  define MAC_PASS_CONTROL	(1 << 2)
+#  define MAC_SET_PAUSE(X)	(((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG		0x20
+#define MAC_VLAN2_TAG		0x24
+
+/* Ethernet Controller Enable */
+
+#  define MAC_EN_CLOCK_ENABLE	(1 << 0)
+#  define MAC_EN_RESET0		(1 << 1)
+#  define MAC_EN_TOSS		(0 << 2)
+#  define MAC_EN_CACHEABLE	(1 << 3)
+#  define MAC_EN_RESET1 	(1 << 4)
+#  define MAC_EN_RESET2 	(1 << 5)
+#  define MAC_DMA_RESET 	(1 << 6)
+
+/* Ethernet Controller DMA Channels */
+
+#define MAC0_TX_DMA_ADDR	0xB4004000
+#define MAC1_TX_DMA_ADDR	0xB4004200
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS	0x0
+#  define TX_FRAME_ABORTED	(1 << 0)
+#  define TX_JAB_TIMEOUT	(1 << 1)
+#  define TX_NO_CARRIER 	(1 << 2)
+#  define TX_LOSS_CARRIER	(1 << 3)
+#  define TX_EXC_DEF		(1 << 4)
+#  define TX_LATE_COLL_ABORT	(1 << 5)
+#  define TX_EXC_COLL		(1 << 6)
+#  define TX_UNDERRUN		(1 << 7)
+#  define TX_DEFERRED		(1 << 8)
+#  define TX_LATE_COLL		(1 << 9)
+#  define TX_COLL_CNT_MASK	(0xF << 10)
+#  define TX_PKT_RETRY		(1 << 31)
+#define MAC_TX_BUFF0_ADDR	0x4
+#  define TX_DMA_ENABLE 	(1 << 0)
+#  define TX_T_DONE		(1 << 1)
+#  define TX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN	0x8
+#define MAC_TX_BUFF1_STATUS	0x10
+#define MAC_TX_BUFF1_ADDR	0x14
+#define MAC_TX_BUFF1_LEN	0x18
+#define MAC_TX_BUFF2_STATUS	0x20
+#define MAC_TX_BUFF2_ADDR	0x24
+#define MAC_TX_BUFF2_LEN	0x28
+#define MAC_TX_BUFF3_STATUS	0x30
+#define MAC_TX_BUFF3_ADDR	0x34
+#define MAC_TX_BUFF3_LEN	0x38
+
+#define MAC0_RX_DMA_ADDR	0xB4004100
+#define MAC1_RX_DMA_ADDR	0xB4004300
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS	0x0
+#  define RX_FRAME_LEN_MASK	0x3fff
+#  define RX_WDOG_TIMER 	(1 << 14)
+#  define RX_RUNT		(1 << 15)
+#  define RX_OVERLEN		(1 << 16)
+#  define RX_COLL		(1 << 17)
+#  define RX_ETHER		(1 << 18)
+#  define RX_MII_ERROR		(1 << 19)
+#  define RX_DRIBBLING		(1 << 20)
+#  define RX_CRC_ERROR		(1 << 21)
+#  define RX_VLAN1		(1 << 22)
+#  define RX_VLAN2		(1 << 23)
+#  define RX_LEN_ERROR		(1 << 24)
+#  define RX_CNTRL_FRAME	(1 << 25)
+#  define RX_U_CNTRL_FRAME	(1 << 26)
+#  define RX_MCAST_FRAME	(1 << 27)
+#  define RX_BCAST_FRAME	(1 << 28)
+#  define RX_FILTER_FAIL	(1 << 29)
+#  define RX_PACKET_FILTER	(1 << 30)
+#  define RX_MISSED_FRAME	(1 << 31)
+
+#  define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN |  \
+		    RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+		    RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR	0x4
+#  define RX_DMA_ENABLE 	(1 << 0)
+#  define RX_T_DONE		(1 << 1)
+#  define RX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
+#  define RX_SET_BUFF_ADDR(X)	((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS	0x10
+#define MAC_RX_BUFF1_ADDR	0x14
+#define MAC_RX_BUFF2_STATUS	0x20
+#define MAC_RX_BUFF2_ADDR	0x24
+#define MAC_RX_BUFF3_STATUS	0x30
+#define MAC_RX_BUFF3_ADDR	0x34
+
+/* UARTS 0-3 */
+#define UART_BASE		UART0_ADDR
+#ifdef	CONFIG_SOC_AU1200
+#define UART_DEBUG_BASE 	UART1_ADDR
+#else
+#define UART_DEBUG_BASE 	UART3_ADDR
+#endif
+
+#define UART_RX		0	/* Receive buffer */
+#define UART_TX		4	/* Transmit buffer */
+#define UART_IER	8	/* Interrupt Enable Register */
+#define UART_IIR	0xC	/* Interrupt ID Register */
+#define UART_FCR	0x10	/* FIFO Control Register */
+#define UART_LCR	0x14	/* Line Control Register */
+#define UART_MCR	0x18	/* Modem Control Register */
+#define UART_LSR	0x1C	/* Line Status Register */
+#define UART_MSR	0x20	/* Modem Status Register */
+#define UART_CLK	0x28	/* Baud Rate Clock Divider */
+#define UART_MOD_CNTRL	0x100	/* Module Control */
+
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK	0xF0 /* Mask for the FIFO trigger range */
+#define UART_FCR_R_TRIGGER_1	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR_R_TRIGGER_4	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR_R_TRIGGER_8	0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR_R_TRIGGER_14   0xA0 /* Mask for receive trigger set at 14 */
+#define UART_FCR_T_TRIGGER_0	0x00 /* Mask for transmit trigger set at 0 */
+#define UART_FCR_T_TRIGGER_4	0x10 /* Mask for transmit trigger set at 4 */
+#define UART_FCR_T_TRIGGER_8    0x20 /* Mask for transmit trigger set at 8 */
+#define UART_FCR_T_TRIGGER_12	0x30 /* Mask for transmit trigger set at 12 */
+
+/*
+ * These are the definitions for the Line Control Register
+ */
+#define UART_LCR_SBC	0x40	/* Set break control */
+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
+#define UART_LCR_EPAR	0x10	/* Even parity select */
+#define UART_LCR_PARITY	0x08	/* Parity Enable */
+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT	0x40	/* Transmitter empty */
+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
+#define UART_LSR_BI	0x10	/* Break interrupt indicator */
+#define UART_LSR_FE	0x08	/* Frame error indicator */
+#define UART_LSR_PE	0x04	/* Parity error indicator */
+#define UART_LSR_OE	0x02	/* Overrun error indicator */
+#define UART_LSR_DR	0x01	/* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
+#define UART_MCR_OUT2	0x08	/* Out2 complement */
+#define UART_MCR_OUT1	0x04	/* Out1 complement */
+#define UART_MCR_RTS	0x02	/* RTS complement */
+#define UART_MCR_DTR	0x01	/* DTR complement */
+
+/*
+ * These are the definitions for the Modem Status Register
+ */
+#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
+#define UART_MSR_RI	0x40	/* Ring Indicator */
+#define UART_MSR_DSR	0x20	/* Data Set Ready */
+#define UART_MSR_CTS	0x10	/* Clear to Send */
+#define UART_MSR_DDCD	0x08	/* Delta DCD */
+#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
+#define UART_MSR_DDSR	0x02	/* Delta DSR */
+#define UART_MSR_DCTS	0x01	/* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
+
+/* SSIO */
+#define SSI0_STATUS		0xB1600000
+#  define SSI_STATUS_BF 	(1 << 4)
+#  define SSI_STATUS_OF 	(1 << 3)
+#  define SSI_STATUS_UF 	(1 << 2)
+#  define SSI_STATUS_D		(1 << 1)
+#  define SSI_STATUS_B		(1 << 0)
+#define SSI0_INT		0xB1600004
+#  define SSI_INT_OI		(1 << 3)
+#  define SSI_INT_UI		(1 << 2)
+#  define SSI_INT_DI		(1 << 1)
+#define SSI0_INT_ENABLE 	0xB1600008
+#  define SSI_INTE_OIE		(1 << 3)
+#  define SSI_INTE_UIE		(1 << 2)
+#  define SSI_INTE_DIE		(1 << 1)
+#define SSI0_CONFIG		0xB1600020
+#  define SSI_CONFIG_AO 	(1 << 24)
+#  define SSI_CONFIG_DO 	(1 << 23)
+#  define SSI_CONFIG_ALEN_BIT	20
+#  define SSI_CONFIG_ALEN_MASK	(0x7 << 20)
+#  define SSI_CONFIG_DLEN_BIT	16
+#  define SSI_CONFIG_DLEN_MASK	(0x7 << 16)
+#  define SSI_CONFIG_DD 	(1 << 11)
+#  define SSI_CONFIG_AD 	(1 << 10)
+#  define SSI_CONFIG_BM_BIT	8
+#  define SSI_CONFIG_BM_MASK	(0x3 << 8)
+#  define SSI_CONFIG_CE 	(1 << 7)
+#  define SSI_CONFIG_DP 	(1 << 6)
+#  define SSI_CONFIG_DL 	(1 << 5)
+#  define SSI_CONFIG_EP 	(1 << 4)
+#define SSI0_ADATA		0xB1600024
+#  define SSI_AD_D		(1 << 24)
+#  define SSI_AD_ADDR_BIT	16
+#  define SSI_AD_ADDR_MASK	(0xff << 16)
+#  define SSI_AD_DATA_BIT	0
+#  define SSI_AD_DATA_MASK	(0xfff << 0)
+#define SSI0_CLKDIV		0xB1600028
+#define SSI0_CONTROL		0xB1600100
+#  define SSI_CONTROL_CD	(1 << 1)
+#  define SSI_CONTROL_E 	(1 << 0)
+
+/* SSI1 */
+#define SSI1_STATUS		0xB1680000
+#define SSI1_INT		0xB1680004
+#define SSI1_INT_ENABLE 	0xB1680008
+#define SSI1_CONFIG		0xB1680020
+#define SSI1_ADATA		0xB1680024
+#define SSI1_CLKDIV		0xB1680028
+#define SSI1_ENABLE		0xB1680100
+
+/*
+ * Register content definitions
+ */
+#define SSI_STATUS_BF		(1 << 4)
+#define SSI_STATUS_OF		(1 << 3)
+#define SSI_STATUS_UF		(1 << 2)
+#define SSI_STATUS_D		(1 << 1)
+#define SSI_STATUS_B		(1 << 0)
+
+/* SSI_INT */
+#define SSI_INT_OI		(1 << 3)
+#define SSI_INT_UI		(1 << 2)
+#define SSI_INT_DI		(1 << 1)
+
+/* SSI_INTEN */
+#define SSI_INTEN_OIE		(1 << 3)
+#define SSI_INTEN_UIE		(1 << 2)
+#define SSI_INTEN_DIE		(1 << 1)
+
+#define SSI_CONFIG_AO		(1 << 24)
+#define SSI_CONFIG_DO		(1 << 23)
+#define SSI_CONFIG_ALEN 	(7 << 20)
+#define SSI_CONFIG_DLEN 	(15 << 16)
+#define SSI_CONFIG_DD		(1 << 11)
+#define SSI_CONFIG_AD		(1 << 10)
+#define SSI_CONFIG_BM		(3 << 8)
+#define SSI_CONFIG_CE		(1 << 7)
+#define SSI_CONFIG_DP		(1 << 6)
+#define SSI_CONFIG_DL		(1 << 5)
+#define SSI_CONFIG_EP		(1 << 4)
+#define SSI_CONFIG_ALEN_N(N)	((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N)	((N-1) << 16)
+#define SSI_CONFIG_BM_HI	(0 << 8)
+#define SSI_CONFIG_BM_LO	(1 << 8)
+#define SSI_CONFIG_BM_CY	(2 << 8)
+
+#define SSI_ADATA_D		(1 << 24)
+#define SSI_ADATA_ADDR		(0xFF << 16)
+#define SSI_ADATA_DATA		0x0FFF
+#define SSI_ADATA_ADDR_N(N)	(N << 16)
+
+#define SSI_ENABLE_CD		(1 << 1)
+#define SSI_ENABLE_E		(1 << 0)
+
+/* IrDA Controller */
+#define IRDA_BASE		0xB0300000
+#define IR_RING_PTR_STATUS	(IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H	(IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L	(IRDA_BASE + 0x08)
+#define IR_RING_SIZE		(IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT		(IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR	(IRDA_BASE + 0x14)
+#define IR_INT_CLEAR		(IRDA_BASE + 0x18)
+#define IR_CONFIG_1		(IRDA_BASE + 0x20)
+#  define IR_RX_INVERT_LED	(1 << 0)
+#  define IR_TX_INVERT_LED	(1 << 1)
+#  define IR_ST 		(1 << 2)
+#  define IR_SF 		(1 << 3)
+#  define IR_SIR		(1 << 4)
+#  define IR_MIR		(1 << 5)
+#  define IR_FIR		(1 << 6)
+#  define IR_16CRC		(1 << 7)
+#  define IR_TD 		(1 << 8)
+#  define IR_RX_ALL		(1 << 9)
+#  define IR_DMA_ENABLE 	(1 << 10)
+#  define IR_RX_ENABLE		(1 << 11)
+#  define IR_TX_ENABLE		(1 << 12)
+#  define IR_LOOPBACK		(1 << 14)
+#  define IR_SIR_MODE		(IR_SIR | IR_DMA_ENABLE | \
+				 IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS		(IRDA_BASE + 0x24)
+#define IR_ENABLE		(IRDA_BASE + 0x28)
+#  define IR_RX_STATUS		(1 << 9)
+#  define IR_TX_STATUS		(1 << 10)
+#define IR_READ_PHY_CONFIG	(IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG	(IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN		(IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT		(IRDA_BASE + 0x38)
+#define IR_CONFIG_2		(IRDA_BASE + 0x3C)
+#  define IR_MODE_INV		(1 << 0)
+#  define IR_ONE_PIN		(1 << 1)
+#define IR_INTERFACE_CONFIG	(IRDA_BASE + 0x40)
+
+/* GPIO */
+#define SYS_PINFUNC		0xB190002C
+#  define SYS_PF_USB		(1 << 15)	/* 2nd USB device/host */
+#  define SYS_PF_U3		(1 << 14)	/* GPIO23/U3TXD */
+#  define SYS_PF_U2		(1 << 13)	/* GPIO22/U2TXD */
+#  define SYS_PF_U1		(1 << 12)	/* GPIO21/U1TXD */
+#  define SYS_PF_SRC		(1 << 11)	/* GPIO6/SROMCKE */
+#  define SYS_PF_CK5		(1 << 10)	/* GPIO3/CLK5 */
+#  define SYS_PF_CK4		(1 << 9)	/* GPIO2/CLK4 */
+#  define SYS_PF_IRF		(1 << 8)	/* GPIO15/IRFIRSEL */
+#  define SYS_PF_UR3		(1 << 7)	/* GPIO[14:9]/UART3 */
+#  define SYS_PF_I2D		(1 << 6)	/* GPIO8/I2SDI */
+#  define SYS_PF_I2S		(1 << 5)	/* I2S/GPIO[29:31] */
+#  define SYS_PF_NI2		(1 << 4)	/* NI2/GPIO[24:28] */
+#  define SYS_PF_U0		(1 << 3)	/* U0TXD/GPIO20 */
+#  define SYS_PF_RD		(1 << 2)	/* IRTXD/GPIO19 */
+#  define SYS_PF_A97		(1 << 1)	/* AC97/SSL1 */
+#  define SYS_PF_S0		(1 << 0)	/* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+#  define SYS_PF_PC		(1 << 18)	/* PCMCIA/GPIO[207:204] */
+#  define SYS_PF_LCD		(1 << 17)	/* extern lcd/GPIO[203:200] */
+#  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
+#  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
+
+/* Au1550 only.  Redefines lots of pins */
+#  define SYS_PF_PSC2_MASK	(7 << 17)
+#  define SYS_PF_PSC2_AC97	0
+#  define SYS_PF_PSC2_SPI	0
+#  define SYS_PF_PSC2_I2S	(1 << 17)
+#  define SYS_PF_PSC2_SMBUS	(3 << 17)
+#  define SYS_PF_PSC2_GPIO	(7 << 17)
+#  define SYS_PF_PSC3_MASK	(7 << 20)
+#  define SYS_PF_PSC3_AC97	0
+#  define SYS_PF_PSC3_SPI	0
+#  define SYS_PF_PSC3_I2S	(1 << 20)
+#  define SYS_PF_PSC3_SMBUS	(3 << 20)
+#  define SYS_PF_PSC3_GPIO	(7 << 20)
+#  define SYS_PF_PSC1_S1	(1 << 1)
+#  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA 	(1 << 31)
+#define SYS_PINFUNC_S0A 	(1 << 30)
+#define SYS_PINFUNC_S1A 	(1 << 29)
+#define SYS_PINFUNC_LP0 	(1 << 28)
+#define SYS_PINFUNC_LP1 	(1 << 27)
+#define SYS_PINFUNC_LD16 	(1 << 26)
+#define SYS_PINFUNC_LD8 	(1 << 25)
+#define SYS_PINFUNC_LD1 	(1 << 24)
+#define SYS_PINFUNC_LD0 	(1 << 23)
+#define SYS_PINFUNC_P1A 	(3 << 21)
+#define SYS_PINFUNC_P1B 	(1 << 20)
+#define SYS_PINFUNC_FS3 	(1 << 19)
+#define SYS_PINFUNC_P0A 	(3 << 17)
+#define SYS_PINFUNC_CS		(1 << 16)
+#define SYS_PINFUNC_CIM 	(1 << 15)
+#define SYS_PINFUNC_P1C 	(1 << 14)
+#define SYS_PINFUNC_U1T 	(1 << 12)
+#define SYS_PINFUNC_U1R 	(1 << 11)
+#define SYS_PINFUNC_EX1 	(1 << 10)
+#define SYS_PINFUNC_EX0 	(1 << 9)
+#define SYS_PINFUNC_U0R 	(1 << 8)
+#define SYS_PINFUNC_MC		(1 << 7)
+#define SYS_PINFUNC_S0B 	(1 << 6)
+#define SYS_PINFUNC_S0C 	(1 << 5)
+#define SYS_PINFUNC_P0B 	(1 << 4)
+#define SYS_PINFUNC_U0T 	(1 << 3)
+#define SYS_PINFUNC_S1B 	(1 << 2)
+#endif
+
+#define SYS_TRIOUTRD		0xB1900100
+#define SYS_TRIOUTCLR		0xB1900100
+#define SYS_OUTPUTRD		0xB1900108
+#define SYS_OUTPUTSET		0xB1900108
+#define SYS_OUTPUTCLR		0xB190010C
+#define SYS_PINSTATERD		0xB1900110
+#define SYS_PININPUTEN		0xB1900110
+
+/* GPIO2, Au1500, Au1550 only */
+#define GPIO2_BASE		0xB1700000
+#define GPIO2_DIR		(GPIO2_BASE + 0)
+#define GPIO2_OUTPUT		(GPIO2_BASE + 8)
+#define GPIO2_PINSTATE		(GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE 	(GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE		(GPIO2_BASE + 0x14)
+
+/* Power Management */
+#define SYS_SCRATCH0		0xB1900018
+#define SYS_SCRATCH1		0xB190001C
+#define SYS_WAKEMSK		0xB1900034
+#define SYS_ENDIAN		0xB1900038
+#define SYS_POWERCTRL		0xB190003C
+#define SYS_WAKESRC		0xB190005C
+#define SYS_SLPPWR		0xB1900078
+#define SYS_SLEEP		0xB190007C
+
+/* Clock Controller */
+#define SYS_FREQCTRL0		0xB1900020
+#  define SYS_FC_FRDIV2_BIT	22
+#  define SYS_FC_FRDIV2_MASK	(0xff << SYS_FC_FRDIV2_BIT)
+#  define SYS_FC_FE2		(1 << 21)
+#  define SYS_FC_FS2		(1 << 20)
+#  define SYS_FC_FRDIV1_BIT	12
+#  define SYS_FC_FRDIV1_MASK	(0xff << SYS_FC_FRDIV1_BIT)
+#  define SYS_FC_FE1		(1 << 11)
+#  define SYS_FC_FS1		(1 << 10)
+#  define SYS_FC_FRDIV0_BIT	2
+#  define SYS_FC_FRDIV0_MASK	(0xff << SYS_FC_FRDIV0_BIT)
+#  define SYS_FC_FE0		(1 << 1)
+#  define SYS_FC_FS0		(1 << 0)
+#define SYS_FREQCTRL1		0xB1900024
+#  define SYS_FC_FRDIV5_BIT	22
+#  define SYS_FC_FRDIV5_MASK	(0xff << SYS_FC_FRDIV5_BIT)
+#  define SYS_FC_FE5		(1 << 21)
+#  define SYS_FC_FS5		(1 << 20)
+#  define SYS_FC_FRDIV4_BIT	12
+#  define SYS_FC_FRDIV4_MASK	(0xff << SYS_FC_FRDIV4_BIT)
+#  define SYS_FC_FE4		(1 << 11)
+#  define SYS_FC_FS4		(1 << 10)
+#  define SYS_FC_FRDIV3_BIT	2
+#  define SYS_FC_FRDIV3_MASK	(0xff << SYS_FC_FRDIV3_BIT)
+#  define SYS_FC_FE3		(1 << 1)
+#  define SYS_FC_FS3		(1 << 0)
+#define SYS_CLKSRC		0xB1900028
+#  define SYS_CS_ME1_BIT	27
+#  define SYS_CS_ME1_MASK	(0x7 << SYS_CS_ME1_BIT)
+#  define SYS_CS_DE1		(1 << 26)
+#  define SYS_CS_CE1		(1 << 25)
+#  define SYS_CS_ME0_BIT	22
+#  define SYS_CS_ME0_MASK	(0x7 << SYS_CS_ME0_BIT)
+#  define SYS_CS_DE0		(1 << 21)
+#  define SYS_CS_CE0		(1 << 20)
+#  define SYS_CS_MI2_BIT	17
+#  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
+#  define SYS_CS_DI2		(1 << 16)
+#  define SYS_CS_CI2		(1 << 15)
+#ifdef CONFIG_SOC_AU1100
+#  define SYS_CS_ML_BIT 	7
+#  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
+#  define SYS_CS_DL		(1 << 6)
+#  define SYS_CS_CL		(1 << 5)
+#else
+#  define SYS_CS_MUH_BIT	12
+#  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
+#  define SYS_CS_DUH		(1 << 11)
+#  define SYS_CS_CUH		(1 << 10)
+#  define SYS_CS_MUD_BIT	7
+#  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
+#  define SYS_CS_DUD		(1 << 6)
+#  define SYS_CS_CUD		(1 << 5)
+#endif
+#  define SYS_CS_MIR_BIT	2
+#  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
+#  define SYS_CS_DIR		(1 << 1)
+#  define SYS_CS_CIR		(1 << 0)
+
+#  define SYS_CS_MUX_AUX	0x1
+#  define SYS_CS_MUX_FQ0	0x2
+#  define SYS_CS_MUX_FQ1	0x3
+#  define SYS_CS_MUX_FQ2	0x4
+#  define SYS_CS_MUX_FQ3	0x5
+#  define SYS_CS_MUX_FQ4	0x6
+#  define SYS_CS_MUX_FQ5	0x7
+#define SYS_CPUPLL		0xB1900060
+#define SYS_AUXPLL		0xB1900064
+
+/* AC97 Controller */
+#define AC97C_CONFIG		0xB0000000
+#  define AC97C_RECV_SLOTS_BIT	13
+#  define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
+#  define AC97C_XMIT_SLOTS_BIT	3
+#  define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
+#  define AC97C_SG		(1 << 2)
+#  define AC97C_SYNC		(1 << 1)
+#  define AC97C_RESET		(1 << 0)
+#define AC97C_STATUS		0xB0000004
+#  define AC97C_XU		(1 << 11)
+#  define AC97C_XO		(1 << 10)
+#  define AC97C_RU		(1 << 9)
+#  define AC97C_RO		(1 << 8)
+#  define AC97C_READY		(1 << 7)
+#  define AC97C_CP		(1 << 6)
+#  define AC97C_TR		(1 << 5)
+#  define AC97C_TE		(1 << 4)
+#  define AC97C_TF		(1 << 3)
+#  define AC97C_RR		(1 << 2)
+#  define AC97C_RE		(1 << 1)
+#  define AC97C_RF		(1 << 0)
+#define AC97C_DATA		0xB0000008
+#define AC97C_CMD		0xB000000C
+#  define AC97C_WD_BIT		16
+#  define AC97C_READ		(1 << 7)
+#  define AC97C_INDEX_MASK	0x7f
+#define AC97C_CNTRL		0xB0000010
+#  define AC97C_RS		(1 << 1)
+#  define AC97C_CE		(1 << 0)
+
+/* Secure Digital (SD) Controller */
+#define SD0_XMIT_FIFO	0xB0600000
+#define SD0_RECV_FIFO	0xB0600004
+#define SD1_XMIT_FIFO	0xB0680000
+#define SD1_RECV_FIFO	0xB0680004
+
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
+/* Au1500 PCI Controller */
+#define Au1500_CFG_BASE 	0xB4005000	/* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM 	(Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG		(Au1500_CFG_BASE + 4)
+#  define PCI_ERROR		((1 << 22) | (1 << 23) | (1 << 24) | \
+				 (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH	(Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID	(Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID	(Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV	(Au1500_CFG_BASE + 0x14)
+#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
+#define Au1500_PCI_ERR_ADDR	(Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK	(Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID		(Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD	(Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV	(Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE	(Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR 	(Au1500_CFG_BASE + 0x110)
+
+#define Au1500_PCI_HDR		0xB4005100	/* virtual, KSEG1 addr */
+
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
+ * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
+ * hard to store 0x4 0000 0000 in a 32-bit type.  We require a small patch
+ * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses.  For PCI I/O, it's simpler because we get to do the ioremap
+ * ourselves and then adjust the device's resources.
+ */
+#define Au1500_EXT_CFG		0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1	0x680000000ULL
+#define Au1500_PCI_IO_START	0x500000000ULL
+#define Au1500_PCI_IO_END	0x5000FFFFFULL
+#define Au1500_PCI_MEM_START	0x440000000ULL
+#define Au1500_PCI_MEM_END	0x44FFFFFFFULL
+
+#define PCI_IO_START	0x00001000
+#define PCI_IO_END	0x000FFFFF
+#define PCI_MEM_START	0x40000000
+#define PCI_MEM_END	0x4FFFFFFF
+
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN	(19 << 3)
+
+#define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+
+#else /* Au1000 and Au1100 and Au1200 */
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+
+#define PCI_IO_START	0
+#define PCI_IO_END	0
+#define PCI_MEM_START	0
+#define PCI_MEM_END	0
+#define PCI_FIRST_DEVFN 0
+#define PCI_LAST_DEVFN	0
+
+#endif
+
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct {
+	/* 0x0000 */ u32 toytrim;
+	/* 0x0004 */ u32 toywrite;
+	/* 0x0008 */ u32 toymatch0;
+	/* 0x000C */ u32 toymatch1;
+	/* 0x0010 */ u32 toymatch2;
+	/* 0x0014 */ u32 cntrctrl;
+	/* 0x0018 */ u32 scratch0;
+	/* 0x001C */ u32 scratch1;
+	/* 0x0020 */ u32 freqctrl0;
+	/* 0x0024 */ u32 freqctrl1;
+	/* 0x0028 */ u32 clksrc;
+	/* 0x002C */ u32 pinfunc;
+	/* 0x0030 */ u32 reserved0;
+	/* 0x0034 */ u32 wakemsk;
+	/* 0x0038 */ u32 endian;
+	/* 0x003C */ u32 powerctrl;
+	/* 0x0040 */ u32 toyread;
+	/* 0x0044 */ u32 rtctrim;
+	/* 0x0048 */ u32 rtcwrite;
+	/* 0x004C */ u32 rtcmatch0;
+	/* 0x0050 */ u32 rtcmatch1;
+	/* 0x0054 */ u32 rtcmatch2;
+	/* 0x0058 */ u32 rtcread;
+	/* 0x005C */ u32 wakesrc;
+	/* 0x0060 */ u32 cpupll;
+	/* 0x0064 */ u32 auxpll;
+	/* 0x0068 */ u32 reserved1;
+	/* 0x006C */ u32 reserved2;
+	/* 0x0070 */ u32 reserved3;
+	/* 0x0074 */ u32 reserved4;
+	/* 0x0078 */ u32 slppwr;
+	/* 0x007C */ u32 sleep;
+	/* 0x0080 */ u32 reserved5[32];
+	/* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+	/* 0x0104 */ u32 reserved6;
+	/* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+	/* 0x010C */ u32 outputclr;
+	/* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+} AU1X00_SYS;
+
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
+
+/*
+ * Processor information based on PRID.
+ * Copied from PowerPC.
+ */
+#ifndef _LANGUAGE_ASSEMBLY
+struct cpu_spec {
+	/* CPU is matched via (PRID & prid_mask) == prid_value */
+	unsigned int	prid_mask;
+	unsigned int	prid_value;
+
+	char		*cpu_name;
+	unsigned char	cpu_od;		/* Set Config[OD] */
+	unsigned char	cpu_bclk;	/* Enable BCLK switching */
+	unsigned char	cpu_pll_wo;	/* sys_cpupll reg. write-only */
+};
+
+extern struct cpu_spec	cpu_specs[];
+extern struct cpu_spec	*cur_cpu_spec[];
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
new file mode 100644
index 0000000..c333b4e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -0,0 +1,458 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using and allocating DMA channels on the Alchemy
+ *      Au1x00 MIPS processors.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <linux/io.h>		/* need byte IO */
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+#define NUM_AU1000_DMA_CHANNELS	8
+
+/* DMA Channel Base Addresses */
+#define DMA_CHANNEL_BASE	0xB4002000
+#define DMA_CHANNEL_LEN		0x00000100
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET		0x00000000
+#define DMA_MODE_READ		DMA_MODE_SET
+#define DMA_MODE_CLEAR		0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK		(0x0f << 20)
+#define DMA_DID_BIT		16
+#define DMA_DID_MASK		(0x0f << DMA_DID_BIT)
+#define DMA_DS			(1 << 15)
+#define DMA_BE			(1 << 13)
+#define DMA_DR			(1 << 12)
+#define DMA_TS8 		(1 << 11)
+#define DMA_DW_BIT		9
+#define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
+#define DMA_DW8			(0 << DMA_DW_BIT)
+#define DMA_DW16		(1 << DMA_DW_BIT)
+#define DMA_DW32		(2 << DMA_DW_BIT)
+#define DMA_NC			(1 << 8)
+#define DMA_IE			(1 << 7)
+#define DMA_HALT		(1 << 6)
+#define DMA_GO			(1 << 5)
+#define DMA_AB			(1 << 4)
+#define DMA_D1			(1 << 3)
+#define DMA_BE1 		(1 << 2)
+#define DMA_D0			(1 << 1)
+#define DMA_BE0 		(1 << 0)
+
+#define DMA_PERIPHERAL_ADDR	0x00000008
+#define DMA_BUFFER0_START	0x0000000C
+#define DMA_BUFFER1_START	0x00000014
+#define DMA_BUFFER0_COUNT	0x00000010
+#define DMA_BUFFER1_COUNT	0x00000018
+#define DMA_BAH_BIT	16
+#define DMA_BAH_MASK	(0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT	0
+#define DMA_COUNT_MASK	(0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
+enum {
+	DMA_ID_UART0_TX = 0,
+	DMA_ID_UART0_RX,
+	DMA_ID_GP04,
+	DMA_ID_GP05,
+	DMA_ID_AC97C_TX,
+	DMA_ID_AC97C_RX,
+	DMA_ID_UART3_TX,
+	DMA_ID_UART3_RX,
+	DMA_ID_USBDEV_EP0_RX,
+	DMA_ID_USBDEV_EP0_TX,
+	DMA_ID_USBDEV_EP2_TX,
+	DMA_ID_USBDEV_EP3_TX,
+	DMA_ID_USBDEV_EP4_RX,
+	DMA_ID_USBDEV_EP5_RX,
+	DMA_ID_I2S_TX,
+	DMA_ID_I2S_RX,
+	DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+	DMA_ID_SD0_TX = 0,
+	DMA_ID_SD0_RX,
+	DMA_ID_SD1_TX,
+	DMA_ID_SD1_RX,
+	DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+	int dev_id;		/* this channel is allocated if >= 0, */
+				/* free otherwise */
+	unsigned int io;
+	const char *dev_str;
+	int irq;
+	void *irq_dev;
+	unsigned int fifo_addr;
+	unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+			      const char *dev_str,
+			      irq_handler_t irqhandler,
+			      unsigned long irqflags,
+			      void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+				int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+	if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+	    au1000_dma_table[dmanr].dev_id < 0)
+		return NULL;
+	return &au1000_dma_table[dmanr];
+}
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static inline void enable_dma_buffer0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static inline void enable_dma_buffers(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static inline void start_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static inline void halt_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	int i;
+
+	if (!chan)
+		return;
+	au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+
+	/* Poll the halt bit */
+	for (i = 0; i < DMA_HALT_POLL; i++)
+		if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+			break;
+	if (i == DMA_HALT_POLL)
+		printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	halt_dma(dmanr);
+
+	/* Now we can disable the buffers */
+	au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline int dma_halted(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+	u32 mode;
+
+	if (!chan)
+		return;
+
+	disable_dma(dmanr);
+
+	/* Set device FIFO address */
+	au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+
+	mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+	if (chan->irq)
+		mode |= DMA_IE;
+
+	au_writel(~mode, chan->io + DMA_MODE_CLEAR);
+	au_writel(mode,  chan->io + DMA_MODE_SET);
+}
+
+/*
+ * Set mode for a specific DMA channel
+ */
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	/*
+	 * set_dma_mode is only allowed to change endianess, direction,
+	 * transfer size, device FIFO width, and coherency settings.
+	 * Make sure anything else is masked off.
+	 */
+	mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+	chan->mode |= mode;
+}
+
+static inline unsigned int get_dma_mode(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return chan->mode;
+}
+
+static inline int get_dma_active_buffer(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+/*
+ * Set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+
+	if (chan->mode & DMA_DS)	/* second bank of device IDs */
+		return;
+
+	if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+		return;
+
+	au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static inline void clear_dma_done0(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline void clear_dma_done1(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	au_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return;
+	count &= DMA_COUNT_MASK;
+	au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+	au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+	return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static inline int get_dma_done_irq(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return -1;
+	return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	int curBufCntReg, count;
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan)
+		return 0;
+
+	curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+	    DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+	count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+	if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+		count <<= 1;
+	else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+		count <<= 2;
+
+	return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
new file mode 100644
index 0000000..d8c96fd
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
@@ -0,0 +1,56 @@
+/*
+ * FILE NAME au1000_gpio.h
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	API to Alchemy Au1xx0 GPIO device.
+ *
+ *  Author: MontaVista Software, Inc.  <source@mvista.com>
+ *          Steve Longerbeam
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AU1000_GPIO_H
+#define __AU1000_GPIO_H
+
+#include <linux/ioctl.h>
+
+#define AU1000GPIO_IOC_MAGIC 'A'
+
+#define AU1000GPIO_IN		_IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET		_IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR	_IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT		_IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE	_IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK	_IOR(AU1000GPIO_IOC_MAGIC, 5, int)
+
+#ifdef __KERNEL__
+extern u32 get_au1000_avail_gpio_mask(void);
+extern int au1000gpio_tristate(u32 data);
+extern int au1000gpio_in(u32 *data);
+extern int au1000gpio_set(u32 data);
+extern int au1000gpio_clear(u32 data);
+extern int au1000gpio_out(u32 data);
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
new file mode 100644
index 0000000..c35e209
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,208 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Defines for using the MMC/SD controllers on the
+ *      Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ *         	dan@embeddededge.com or tim@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ *    June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+	int(*cd_setup)(void *mmc_host, int on);
+	int(*card_inserted)(void *mmc_host);
+	int(*card_readonly)(void *mmc_host);
+	void(*set_power)(void *mmc_host, int state);
+	struct led_classdev *led;
+};
+
+#define SD0_BASE	0xB0600000
+#define SD1_BASE	0xB0680000
+
+
+/*
+ *  Register offsets.
+ */
+#define SD_TXPORT	(0x0000)
+#define SD_RXPORT	(0x0004)
+#define SD_CONFIG	(0x0008)
+#define SD_ENABLE	(0x000C)
+#define SD_CONFIG2	(0x0010)
+#define SD_BLKSIZE	(0x0014)
+#define SD_STATUS	(0x0018)
+#define SD_DEBUG	(0x001C)
+#define SD_CMD		(0x0020)
+#define SD_CMDARG	(0x0024)
+#define SD_RESP3	(0x0028)
+#define SD_RESP2	(0x002C)
+#define SD_RESP1	(0x0030)
+#define SD_RESP0	(0x0034)
+#define SD_TIMEOUT	(0x0038)
+
+
+/*
+ *  SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD	(0x000000ff)
+
+
+/*
+ *  SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD	(0x000000ff)
+
+
+/*
+ *  SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV	(0x000001ff)
+#define SD_CONFIG_DE	(0x00000200)
+#define SD_CONFIG_NE	(0x00000400)
+#define SD_CONFIG_TU	(0x00000800)
+#define SD_CONFIG_TO	(0x00001000)
+#define SD_CONFIG_RU	(0x00002000)
+#define SD_CONFIG_RO	(0x00004000)
+#define SD_CONFIG_I	(0x00008000)
+#define SD_CONFIG_CR	(0x00010000)
+#define SD_CONFIG_RAT	(0x00020000)
+#define SD_CONFIG_DD	(0x00040000)
+#define SD_CONFIG_DT	(0x00080000)
+#define SD_CONFIG_SC	(0x00100000)
+#define SD_CONFIG_RC	(0x00200000)
+#define SD_CONFIG_WC	(0x00400000)
+#define SD_CONFIG_xxx	(0x00800000)
+#define SD_CONFIG_TH	(0x01000000)
+#define SD_CONFIG_TE	(0x02000000)
+#define SD_CONFIG_TA	(0x04000000)
+#define SD_CONFIG_RH	(0x08000000)
+#define SD_CONFIG_RA	(0x10000000)
+#define SD_CONFIG_RF	(0x20000000)
+#define SD_CONFIG_CD	(0x40000000)
+#define SD_CONFIG_SI	(0x80000000)
+
+
+/*
+ *  SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE	(0x00000001)
+#define SD_ENABLE_R	(0x00000002)
+
+
+/*
+ *  SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN	(0x00000001)
+#define SD_CONFIG2_FF	(0x00000002)
+#define SD_CONFIG2_xx1	(0x00000004)
+#define SD_CONFIG2_DF	(0x00000008)
+#define SD_CONFIG2_DC	(0x00000010)
+#define SD_CONFIG2_xx2	(0x000000e0)
+#define SD_CONFIG2_WB	(0x00000100)
+#define SD_CONFIG2_RW	(0x00000200)
+
+
+/*
+ *  SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS	(0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT	 (0)
+#define SD_BLKSIZE_BC	(0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT	(16)
+
+
+/*
+ *  SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW	(0x00000007)
+#define SD_STATUS_xx1	(0x00000008)
+#define SD_STATUS_CB	(0x00000010)
+#define SD_STATUS_DB	(0x00000020)
+#define SD_STATUS_CF	(0x00000040)
+#define SD_STATUS_D3	(0x00000080)
+#define SD_STATUS_xx2	(0x00000300)
+#define SD_STATUS_NE	(0x00000400)
+#define SD_STATUS_TU	(0x00000800)
+#define SD_STATUS_TO	(0x00001000)
+#define SD_STATUS_RU	(0x00002000)
+#define SD_STATUS_RO	(0x00004000)
+#define SD_STATUS_I	(0x00008000)
+#define SD_STATUS_CR	(0x00010000)
+#define SD_STATUS_RAT	(0x00020000)
+#define SD_STATUS_DD	(0x00040000)
+#define SD_STATUS_DT	(0x00080000)
+#define SD_STATUS_SC	(0x00100000)
+#define SD_STATUS_RC	(0x00200000)
+#define SD_STATUS_WC	(0x00400000)
+#define SD_STATUS_xx3	(0x00800000)
+#define SD_STATUS_TH	(0x01000000)
+#define SD_STATUS_TE	(0x02000000)
+#define SD_STATUS_TA	(0x04000000)
+#define SD_STATUS_RH	(0x08000000)
+#define SD_STATUS_RA	(0x10000000)
+#define SD_STATUS_RF	(0x20000000)
+#define SD_STATUS_CD	(0x40000000)
+#define SD_STATUS_SI	(0x80000000)
+
+
+/*
+ *  SD_CMD bit definitions.
+ */
+#define SD_CMD_GO	(0x00000001)
+#define SD_CMD_RY	(0x00000002)
+#define SD_CMD_xx1	(0x0000000c)
+#define SD_CMD_CT_MASK	(0x000000f0)
+#define SD_CMD_CT_0	(0x00000000)
+#define SD_CMD_CT_1	(0x00000010)
+#define SD_CMD_CT_2	(0x00000020)
+#define SD_CMD_CT_3	(0x00000030)
+#define SD_CMD_CT_4	(0x00000040)
+#define SD_CMD_CT_5	(0x00000050)
+#define SD_CMD_CT_6	(0x00000060)
+#define SD_CMD_CT_7	(0x00000070)
+#define SD_CMD_CI	(0x0000ff00)
+#define SD_CMD_CI_SHIFT		(8)
+#define SD_CMD_RT_MASK	(0x00ff0000)
+#define SD_CMD_RT_0	(0x00000000)
+#define SD_CMD_RT_1	(0x00010000)
+#define SD_CMD_RT_2	(0x00020000)
+#define SD_CMD_RT_3	(0x00030000)
+#define SD_CMD_RT_4	(0x00040000)
+#define SD_CMD_RT_5	(0x00050000)
+#define SD_CMD_RT_6	(0x00060000)
+#define SD_CMD_RT_1B	(0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
+
diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
new file mode 100644
index 0000000..08e1958
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
@@ -0,0 +1,15 @@
+/*
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
+ */
+
+#ifndef _AU1550_SPI_H_
+#define _AU1550_SPI_H_
+
+struct au1550_spi_info {
+	u32 mainclk_hz;		/* main input clock frequency of PSC */
+	u16 num_chipselect;	/* number of chipselects supported */
+	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+	void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
new file mode 100644
index 0000000..1b36550
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx.h
@@ -0,0 +1,43 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 0000000..44a67bf
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,386 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1550 Descriptor
+ *	Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
+ * Interrupt status/enable is bits 15:0 for channels 15 to zero.
+ */
+#define DDMA_GLOBAL_BASE	0xb4003000
+#define DDMA_CHANNEL_BASE	0xb4002000
+
+typedef volatile struct dbdma_global {
+	u32	ddma_config;
+	u32	ddma_intstat;
+	u32	ddma_throttle;
+	u32	ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF		(1 << 2)
+#define DDMA_CONFIG_AH		(1 << 1)
+#define DDMA_CONFIG_AL		(1 << 0)
+
+#define DDMA_THROTTLE_EN	(1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+	u32	ddma_cfg;	/* See below */
+	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
+	u32	ddma_statptr;	/* word aligned pointer to status word */
+	u32	ddma_dbell;	/* A write activates channel operation */
+	u32	ddma_irq;	/* If bit 0 set, interrupt pending */
+	u32	ddma_stat;	/* See below */
+	u32	ddma_bytecnt;	/* Byte count, valid only when chan idle */
+	/* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED	(1 << 9)	/* source DMA level/edge detect */
+#define DDMA_CFG_SP	(1 << 8)	/* source DMA polarity */
+#define DDMA_CFG_DED	(1 << 7)	/* destination DMA level/edge detect */
+#define DDMA_CFG_DP	(1 << 6)	/* destination DMA polarity */
+#define DDMA_CFG_SYNC	(1 << 5)	/* Sync static bus controller */
+#define DDMA_CFG_PPR	(1 << 4)	/* PCI posted read/write control */
+#define DDMA_CFG_DFN	(1 << 3)	/* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE	(1 << 2)	/* Source big endian */
+#define DDMA_CFG_DBE	(1 << 1)	/* Destination big endian */
+#define DDMA_CFG_EN	(1 << 0)	/* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state.  Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN	(1 << 0)
+
+#define DDMA_STAT_DB	(1 << 2)	/* Doorbell pushed */
+#define DDMA_STAT_V	(1 << 1)	/* Descriptor valid */
+#define DDMA_STAT_H	(1 << 0)	/* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+	u32	dscr_cmd0;		/* See below */
+	u32	dscr_cmd1;		/* See below */
+	u32	dscr_source0;		/* source phys address */
+	u32	dscr_source1;		/* See below */
+	u32	dscr_dest0;		/* Destination address */
+	u32	dscr_dest1;		/* See below */
+	u32	dscr_stat;		/* completion status */
+	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+	/*
+	 * First 32 bytes are HW specific!!!
+	 * Lets have some SW data following -- make sure it's 32 bytes.
+	 */
+	u32	sw_status;
+	u32 	sw_context;
+	u32	sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
+#define DSCR_CMD0_MEM		(1 << 30)	/* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK	(0x1f << 25)	/* Source ID */
+#define DSCR_CMD0_DID_MASK	(0x1f << 20)	/* Destination ID */
+#define DSCR_CMD0_SW_MASK	(0x3 << 18)	/* Source Width */
+#define DSCR_CMD0_DW_MASK	(0x3 << 16)	/* Destination Width */
+#define DSCR_CMD0_ARB		(0x1 << 15)	/* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK	(0x3 << 13)	/* Descriptor Type */
+#define DSCR_CMD0_SN		(0x1 << 12)	/* Source non-coherent */
+#define DSCR_CMD0_DN		(0x1 << 11)	/* Destination non-coherent */
+#define DSCR_CMD0_SM		(0x1 << 10)	/* Stride mode */
+#define DSCR_CMD0_IE		(0x1 << 8)	/* Interrupt Enable */
+#define DSCR_CMD0_SP		(0x1 << 4)	/* Status pointer select */
+#define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
+
+#define SW_STATUS_INUSE 	(1 << 0)
+
+/* Command 0 device IDs. */
+#ifdef CONFIG_SOC_AU1550
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART3_TX	2
+#define DSCR_CMD0_UART3_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_DMA_REQ2	6
+#define DSCR_CMD0_DMA_REQ3	7
+#define DSCR_CMD0_USBDEV_RX0	8
+#define DSCR_CMD0_USBDEV_TX0	9
+#define DSCR_CMD0_USBDEV_TX1	10
+#define DSCR_CMD0_USBDEV_TX2	11
+#define DSCR_CMD0_USBDEV_RX3	12
+#define DSCR_CMD0_USBDEV_RX4	13
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_PSC2_TX	18
+#define DSCR_CMD0_PSC2_RX	19
+#define DSCR_CMD0_PSC3_TX	20
+#define DSCR_CMD0_PSC3_RX	21
+#define DSCR_CMD0_PCI_WRITE	22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_MAC0_RX	24
+#define DSCR_CMD0_MAC0_TX	25
+#define DSCR_CMD0_MAC1_RX	26
+#define DSCR_CMD0_MAC1_TX	27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX	0
+#define DSCR_CMD0_UART0_RX	1
+#define DSCR_CMD0_UART1_TX	2
+#define DSCR_CMD0_UART1_RX	3
+#define DSCR_CMD0_DMA_REQ0	4
+#define DSCR_CMD0_DMA_REQ1	5
+#define DSCR_CMD0_MAE_BE	6
+#define DSCR_CMD0_MAE_FE	7
+#define DSCR_CMD0_SDMS_TX0	8
+#define DSCR_CMD0_SDMS_RX0	9
+#define DSCR_CMD0_SDMS_TX1	10
+#define DSCR_CMD0_SDMS_RX1	11
+#define DSCR_CMD0_AES_TX	13
+#define DSCR_CMD0_AES_RX	12
+#define DSCR_CMD0_PSC0_TX	14
+#define DSCR_CMD0_PSC0_RX	15
+#define DSCR_CMD0_PSC1_TX	16
+#define DSCR_CMD0_PSC1_RX	17
+#define DSCR_CMD0_CIM_RXA	18
+#define DSCR_CMD0_CIM_RXB	19
+#define DSCR_CMD0_CIM_RXC	20
+#define DSCR_CMD0_MAE_BOTH	21
+#define DSCR_CMD0_LCD		22
+#define DSCR_CMD0_NAND_FLASH	23
+#define DSCR_CMD0_PSC0_SYNC	24
+#define DSCR_CMD0_PSC1_SYNC	25
+#define DSCR_CMD0_CIM_SYNC	26
+#endif /* CONFIG_SOC_AU1200 */
+
+#define DSCR_CMD0_THROTTLE	30
+#define DSCR_CMD0_ALWAYS	31
+#define DSCR_NDEV_IDS		32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+				  ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x)	((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE		0
+#define DSCR_CMD0_HALFWORD	1
+#define DSCR_CMD0_WORD		2
+
+#define DSCR_CMD0_SW(x)		(((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x)		(((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD	0
+#define DSCR_CMD0_LITERAL	1
+#define DSCR_CMD0_CMP_BRANCH	2
+
+#define DSCR_CMD0_DT(x)		(((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE	0	/* Don't change */
+#define DSCR_CMD0_ST_CURRENT	1	/* Write current status */
+#define DSCR_CMD0_ST_CMD0	2	/* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT	3	/* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x)		(((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK	(0xf << 28)	/* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK	(0xf << 24)	/* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK	(0x3 << 22)	/* Flag bits */
+#define DSCR_CMD1_BC_MASK	(0x3fffff)	/* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0	0
+#define DSCR_CMD1_FL_MEM_STRIDE1	1
+#define DSCR_CMD1_FL_MEM_STRIDE2	2
+
+#define DSCR_CMD1_FL(x)		(((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK	(3 << 30)	/* Src xfer size */
+#define DSCR_SRC1_SAM_MASK	(3 << 28)	/* Src xfer movement */
+#define DSCR_SRC1_SB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_SRC1_SB(x)		(((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_SRC1_SS(x)		(((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK	(3 << 30)	/* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK	(3 << 28)	/* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_DEST1_DB(x)	(((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_DEST1_DS(x)	(((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1		0
+#define DSCR_xTS_SIZE2		1
+#define DSCR_xTS_SIZE4		2
+#define DSCR_xTS_SIZE8		3
+#define DSCR_SRC1_STS(x)	(((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x)	(((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT	0
+#define DSCR_xAM_DECREMENT	1
+#define DSCR_xAM_STATIC		2
+#define DSCR_xAM_BURST		3
+#define DSCR_SRC1_SAM(x)	(((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x)	(((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK	(0x07ffffff)
+#define DSCR_NXTPTR(x)		((x) >> 5)
+#define DSCR_GET_NXTPTR(x)	((x) << 5)
+#define DSCR_NXTPTR_MS		(1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS	16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+	u32	dev_id;
+	u32	dev_flags;
+	u32	dev_tsize;
+	u32	dev_devwidth;
+	u32	dev_physaddr;		/* If FIFO */
+	u32	dev_intlevel;
+	u32	dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+	spinlock_t      lock;
+
+	u32			chan_flags;
+	u32			chan_index;
+	dbdev_tab_t		*chan_src;
+	dbdev_tab_t		*chan_dest;
+	au1x_dma_chan_t		*chan_ptr;
+	au1x_ddma_desc_t	*chan_desc_base;
+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
+	void			*chan_callparam;
+	void			(*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE		(1 << 0)
+#define DEV_FLAGS_ANYUSE	(1 << 1)
+#define DEV_FLAGS_OUT		(1 << 2)
+#define DEV_FLAGS_IN		(1 << 3)
+#define DEV_FLAGS_BURSTABLE	(1 << 4)
+#define DEV_FLAGS_SYNC		(1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel.  The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name.  The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+				   void (*callback)(int, void *),
+				   void *callparam);
+
+#define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes)			\
+	_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)	\
+	_au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags)			\
+	au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes)			\
+	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) 	\
+	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags)			\
+	au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+
+/*
+ *	Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE	(1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 0000000..60638b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,194 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00   Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ *       Interface and Linux Device Driver" Application Note.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+#define DMA_WAIT_TIMEOUT	100
+#define NUM_DESCRIPTORS 	PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+#define NUM_DESCRIPTORS 	2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+#define AU1XXX_ATA_RQSIZE	128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
+#define WAKE_ON_ACCESS 1
+
+typedef struct {
+	spinlock_t		lock;	/* Used to block on state transitions */
+	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
+	unsigned		stopped; /* Used to signal device is stopped */
+} pm_state;
+#endif
+
+typedef struct {
+	u32			tx_dev_id, rx_dev_id, target_dev_id;
+	u32			tx_chan, rx_chan;
+	void			*tx_desc_head, *rx_desc_head;
+	ide_hwif_t		*hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	ide_drive_t		*drive;
+	struct dbdma_cmd	*dma_table_cpu;
+	dma_addr_t		dma_table_dma;
+#endif
+	int			irq;
+	u32			regbase;
+#ifdef CONFIG_PM
+	pm_state		pm;
+#endif
+} _auide_hwif;
+
+/******************************************************************************/
+/* PIO Mode timing calculation :					      */
+/*									      */
+/* Static Bus Spec   ATA Spec						      */
+/*	Tcsoe	   =	t1						      */
+/*	Toecs	   =	t9						      */
+/*	Twcs	   =	t9						      */
+/*	Tcsh	   =	t2i | t2					      */
+/*	Tcsoff	   =	t2i | t2					      */
+/*	Twp	   =	t2						      */
+/*	Tcsw	   =	t1						      */
+/*	Tpm	   =	0						      */
+/*	Ta	   =	t1+t2						      */
+/******************************************************************************/
+
+#define TCSOE_MASK		(0x07 << 29)
+#define TOECS_MASK		(0x07 << 26)
+#define TWCS_MASK		(0x07 << 28)
+#define TCSH_MASK		(0x0F << 24)
+#define TCSOFF_MASK		(0x07 << 20)
+#define TWP_MASK		(0x3F << 14)
+#define TCSW_MASK		(0x0F << 10)
+#define TPM_MASK		(0x0F << 6)
+#define TA_MASK 		(0x3F << 0)
+#define TS_MASK 		(1 << 8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO0_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO0_TWCS	(0x02 << 28)
+#define SBC_IDE_PIO0_TCSH	(0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO0_TWP	(0x10 << 14)
+#define SBC_IDE_PIO0_TCSW	(0x04 << 10)
+#define SBC_IDE_PIO0_TPM	(0x00 << 6)
+#define SBC_IDE_PIO0_TA 	(0x15 << 0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
+#define SBC_IDE_PIO1_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO1_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO1_TCSH	(0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF	(0x06 << 20)
+#define SBC_IDE_PIO1_TWP	(0x08 << 14)
+#define SBC_IDE_PIO1_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO1_TPM	(0x00 << 6)
+#define SBC_IDE_PIO1_TA 	(0x0B << 0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO2_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO2_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO2_TCSH	(0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF	(0x07 << 20)
+#define SBC_IDE_PIO2_TWP	(0x1F << 14)
+#define SBC_IDE_PIO2_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO2_TPM	(0x00 << 6)
+#define SBC_IDE_PIO2_TA 	(0x22 << 0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
+#define SBC_IDE_PIO3_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO3_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO3_TCSH	(0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF	(0x0D << 20)
+#define SBC_IDE_PIO3_TWP	(0x15 << 14)
+#define SBC_IDE_PIO3_TCSW	(0x05 << 10)
+#define SBC_IDE_PIO3_TPM	(0x00 << 6)
+#define SBC_IDE_PIO3_TA 	(0x1A << 0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
+#define SBC_IDE_PIO4_TOECS	(0x01 << 26)
+#define SBC_IDE_PIO4_TWCS	(0x01 << 28)
+#define SBC_IDE_PIO4_TCSH	(0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF	(0x04 << 20)
+#define SBC_IDE_PIO4_TWP	(0x0D << 14)
+#define SBC_IDE_PIO4_TCSW	(0x03 << 10)
+#define SBC_IDE_PIO4_TPM	(0x00 << 6)
+#define SBC_IDE_PIO4_TA 	(0x12 << 0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH	(0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF	(0x07 << 20)
+#define SBC_IDE_MDMA0_TWP	(0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW	(0x03 << 10)
+#define SBC_IDE_MDMA0_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA0_TA	(0x0F << 0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE	(0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH	(0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF	(0x05 << 20)
+#define SBC_IDE_MDMA1_TWP	(0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW	(0x05 << 10)
+#define SBC_IDE_MDMA1_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA1_TA	(0x15 << 0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE	(0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS	(0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS	(0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH	(0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF	(0x04 << 20)
+#define SBC_IDE_MDMA2_TWP	(0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW	(0x04 << 10)
+#define SBC_IDE_MDMA2_TPM	(0x00 << 6)
+#define SBC_IDE_MDMA2_TA	(0x12 << 0)
+
+#define SBC_IDE_TIMING(mode) \
+	(SBC_IDE_##mode##_TWCS | \
+	 SBC_IDE_##mode##_TCSH | \
+	 SBC_IDE_##mode##_TCSOFF | \
+	 SBC_IDE_##mode##_TWP | \
+	 SBC_IDE_##mode##_TCSW | \
+	 SBC_IDE_##mode##_TPM | \
+	 SBC_IDE_##mode##_TA)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 0000000..892b7f1
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,505 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/* The PSC base addresses.  */
+#ifdef CONFIG_SOC_AU1550
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
+#define PSC2_BASE_ADDR		0xb0a00000
+#define PSC3_BASE_ADDR		0xb0b00000
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#define PSC0_BASE_ADDR		0xb1a00000
+#define PSC1_BASE_ADDR		0xb1b00000
+#endif
+
+/*
+ * The PSC select and control registers are common to all protocols.
+ */
+#define PSC_SEL_OFFSET		0x00000000
+#define PSC_CTRL_OFFSET		0x00000004
+
+#define PSC_SEL_CLK_MASK	(3 << 4)
+#define PSC_SEL_CLK_INTCLK	(0 << 4)
+#define PSC_SEL_CLK_EXTCLK	(1 << 4)
+#define PSC_SEL_CLK_SERCLK	(2 << 4)
+
+#define PSC_SEL_PS_MASK		0x00000007
+#define PSC_SEL_PS_DISABLED	0
+#define PSC_SEL_PS_SPIMODE	2
+#define PSC_SEL_PS_I2SMODE	3
+#define PSC_SEL_PS_AC97MODE	4
+#define PSC_SEL_PS_SMBUSMODE	5
+
+#define PSC_CTRL_DISABLE	0
+#define PSC_CTRL_SUSPEND	2
+#define PSC_CTRL_ENABLE 	3
+
+/* AC97 Registers. */
+#define PSC_AC97CFG_OFFSET	0x00000008
+#define PSC_AC97MSK_OFFSET	0x0000000c
+#define PSC_AC97PCR_OFFSET	0x00000010
+#define PSC_AC97STAT_OFFSET	0x00000014
+#define PSC_AC97EVNT_OFFSET	0x00000018
+#define PSC_AC97TXRX_OFFSET	0x0000001c
+#define PSC_AC97CDC_OFFSET	0x00000020
+#define PSC_AC97RST_OFFSET	0x00000024
+#define PSC_AC97GPO_OFFSET	0x00000028
+#define PSC_AC97GPI_OFFSET	0x0000002c
+
+#define AC97_PSC_SEL		(AC97_PSC_BASE + PSC_SEL_OFFSET)
+#define AC97_PSC_CTRL		(AC97_PSC_BASE + PSC_CTRL_OFFSET)
+#define PSC_AC97CFG		(AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
+#define PSC_AC97MSK		(AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
+#define PSC_AC97PCR		(AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
+#define PSC_AC97STAT		(AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
+#define PSC_AC97EVNT		(AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
+#define PSC_AC97TXRX		(AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
+#define PSC_AC97CDC		(AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
+#define PSC_AC97RST		(AC97_PSC_BASE + PSC_AC97RST_OFFSET)
+#define PSC_AC97GPO		(AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
+#define PSC_AC97GPI		(AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
+
+/* AC97 Config Register. */
+#define PSC_AC97CFG_RT_MASK	(3 << 30)
+#define PSC_AC97CFG_RT_FIFO1	(0 << 30)
+#define PSC_AC97CFG_RT_FIFO2	(1 << 30)
+#define PSC_AC97CFG_RT_FIFO4	(2 << 30)
+#define PSC_AC97CFG_RT_FIFO8	(3 << 30)
+
+#define PSC_AC97CFG_TT_MASK	(3 << 28)
+#define PSC_AC97CFG_TT_FIFO1	(0 << 28)
+#define PSC_AC97CFG_TT_FIFO2	(1 << 28)
+#define PSC_AC97CFG_TT_FIFO4	(2 << 28)
+#define PSC_AC97CFG_TT_FIFO8	(3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE	(1 << 27)
+#define PSC_AC97CFG_DE_ENABLE	(1 << 26)
+#define PSC_AC97CFG_SE_ENABLE	(1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK	(0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK	(0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK	(0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE	(1)
+
+/* Enable slots 3-12. */
+#define PSC_AC97CFG_TXSLOT_ENA(x)	(1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x)	(1 << (((x) - 3) + 1))
+
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11.  Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x)	(((((x) - 2) / 2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x)	(((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register. */
+#define PSC_AC97MSK_GR		(1 << 25)
+#define PSC_AC97MSK_CD		(1 << 24)
+#define PSC_AC97MSK_RR		(1 << 13)
+#define PSC_AC97MSK_RO		(1 << 12)
+#define PSC_AC97MSK_RU		(1 << 11)
+#define PSC_AC97MSK_TR		(1 << 10)
+#define PSC_AC97MSK_TO		(1 << 9)
+#define PSC_AC97MSK_TU		(1 << 8)
+#define PSC_AC97MSK_RD		(1 << 5)
+#define PSC_AC97MSK_TD		(1 << 4)
+#define PSC_AC97MSK_ALLMASK	(PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+				 PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+				 PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+				 PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+				 PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register. */
+#define PSC_AC97PCR_RC		(1 << 6)
+#define PSC_AC97PCR_RP		(1 << 5)
+#define PSC_AC97PCR_RS		(1 << 4)
+#define PSC_AC97PCR_TC		(1 << 2)
+#define PSC_AC97PCR_TP		(1 << 1)
+#define PSC_AC97PCR_TS		(1 << 0)
+
+/* AC97 Status register (read only). */
+#define PSC_AC97STAT_CB		(1 << 26)
+#define PSC_AC97STAT_CP		(1 << 25)
+#define PSC_AC97STAT_CR		(1 << 24)
+#define PSC_AC97STAT_RF		(1 << 13)
+#define PSC_AC97STAT_RE		(1 << 12)
+#define PSC_AC97STAT_RR		(1 << 11)
+#define PSC_AC97STAT_TF		(1 << 10)
+#define PSC_AC97STAT_TE		(1 << 9)
+#define PSC_AC97STAT_TR		(1 << 8)
+#define PSC_AC97STAT_RB		(1 << 5)
+#define PSC_AC97STAT_TB		(1 << 4)
+#define PSC_AC97STAT_DI		(1 << 2)
+#define PSC_AC97STAT_DR		(1 << 1)
+#define PSC_AC97STAT_SR		(1 << 0)
+
+/* AC97 Event Register. */
+#define PSC_AC97EVNT_GR		(1 << 25)
+#define PSC_AC97EVNT_CD		(1 << 24)
+#define PSC_AC97EVNT_RR		(1 << 13)
+#define PSC_AC97EVNT_RO		(1 << 12)
+#define PSC_AC97EVNT_RU		(1 << 11)
+#define PSC_AC97EVNT_TR		(1 << 10)
+#define PSC_AC97EVNT_TO		(1 << 9)
+#define PSC_AC97EVNT_TU		(1 << 8)
+#define PSC_AC97EVNT_RD		(1 << 5)
+#define PSC_AC97EVNT_TD		(1 << 4)
+
+/* CODEC Command Register. */
+#define PSC_AC97CDC_RD		(1 << 25)
+#define PSC_AC97CDC_ID_MASK	(3 << 23)
+#define PSC_AC97CDC_INDX_MASK	(0x7f << 16)
+#define PSC_AC97CDC_ID(x)	(((x) & 0x03) << 23)
+#define PSC_AC97CDC_INDX(x)	(((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register. */
+#define PSC_AC97RST_RST		(1 << 1)
+#define PSC_AC97RST_SNC		(1 << 0)
+
+/* PSC in I2S Mode. */
+typedef struct	psc_i2s {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_i2scfg;
+	u32	psc_i2smsk;
+	u32	psc_i2spcr;
+	u32	psc_i2sstat;
+	u32	psc_i2sevent;
+	u32	psc_i2stxrx;
+	u32	psc_i2sudf;
+} psc_i2s_t;
+
+#define PSC_I2SCFG_OFFSET	0x08
+#define PSC_I2SMASK_OFFSET	0x0C
+#define PSC_I2SPCR_OFFSET	0x10
+#define PSC_I2SSTAT_OFFSET	0x14
+#define PSC_I2SEVENT_OFFSET	0x18
+#define PSC_I2SRXTX_OFFSET	0x1C
+#define PSC_I2SUDF_OFFSET	0x20
+
+/* I2S Config Register. */
+#define PSC_I2SCFG_RT_MASK	(3 << 30)
+#define PSC_I2SCFG_RT_FIFO1	(0 << 30)
+#define PSC_I2SCFG_RT_FIFO2	(1 << 30)
+#define PSC_I2SCFG_RT_FIFO4	(2 << 30)
+#define PSC_I2SCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_I2SCFG_TT_MASK	(3 << 28)
+#define PSC_I2SCFG_TT_FIFO1	(0 << 28)
+#define PSC_I2SCFG_TT_FIFO2	(1 << 28)
+#define PSC_I2SCFG_TT_FIFO4	(2 << 28)
+#define PSC_I2SCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE	(1 << 27)
+#define PSC_I2SCFG_DE_ENABLE	(1 << 26)
+#define PSC_I2SCFG_SET_WS(x)	(((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n)	((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK	(PSC_I2SCFG_WS(0x3F))
+#define PSC_I2SCFG_WI		(1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK	(3 << 13)
+#define PSC_I2SCFG_DIV2		(0 << 13)
+#define PSC_I2SCFG_DIV4		(1 << 13)
+#define PSC_I2SCFG_DIV8		(2 << 13)
+#define PSC_I2SCFG_DIV16	(3 << 13)
+
+#define PSC_I2SCFG_BI		(1 << 12)
+#define PSC_I2SCFG_BUF		(1 << 11)
+#define PSC_I2SCFG_MLJ		(1 << 10)
+#define PSC_I2SCFG_XM		(1 << 9)
+
+/* The word length equation is simply LEN+1. */
+#define PSC_I2SCFG_SET_LEN(x)	((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x)	((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB		(1 << 2)
+#define PSC_I2SCFG_MLF		(1 << 1)
+#define PSC_I2SCFG_MS		(1 << 0)
+
+/* I2S Mask Register. */
+#define PSC_I2SMSK_RR		(1 << 13)
+#define PSC_I2SMSK_RO		(1 << 12)
+#define PSC_I2SMSK_RU		(1 << 11)
+#define PSC_I2SMSK_TR		(1 << 10)
+#define PSC_I2SMSK_TO		(1 << 9)
+#define PSC_I2SMSK_TU		(1 << 8)
+#define PSC_I2SMSK_RD		(1 << 5)
+#define PSC_I2SMSK_TD		(1 << 4)
+#define PSC_I2SMSK_ALLMASK	(PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+				 PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+				 PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+				 PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register. */
+#define PSC_I2SPCR_RC		(1 << 6)
+#define PSC_I2SPCR_RP		(1 << 5)
+#define PSC_I2SPCR_RS		(1 << 4)
+#define PSC_I2SPCR_TC		(1 << 2)
+#define PSC_I2SPCR_TP		(1 << 1)
+#define PSC_I2SPCR_TS		(1 << 0)
+
+/* I2S Status register (read only). */
+#define PSC_I2SSTAT_RF		(1 << 13)
+#define PSC_I2SSTAT_RE		(1 << 12)
+#define PSC_I2SSTAT_RR		(1 << 11)
+#define PSC_I2SSTAT_TF		(1 << 10)
+#define PSC_I2SSTAT_TE		(1 << 9)
+#define PSC_I2SSTAT_TR		(1 << 8)
+#define PSC_I2SSTAT_RB		(1 << 5)
+#define PSC_I2SSTAT_TB		(1 << 4)
+#define PSC_I2SSTAT_DI		(1 << 2)
+#define PSC_I2SSTAT_DR		(1 << 1)
+#define PSC_I2SSTAT_SR		(1 << 0)
+
+/* I2S Event Register. */
+#define PSC_I2SEVNT_RR		(1 << 13)
+#define PSC_I2SEVNT_RO		(1 << 12)
+#define PSC_I2SEVNT_RU		(1 << 11)
+#define PSC_I2SEVNT_TR		(1 << 10)
+#define PSC_I2SEVNT_TO		(1 << 9)
+#define PSC_I2SEVNT_TU		(1 << 8)
+#define PSC_I2SEVNT_RD		(1 << 5)
+#define PSC_I2SEVNT_TD		(1 << 4)
+
+/* PSC in SPI Mode. */
+typedef struct	psc_spi {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_spicfg;
+	u32	psc_spimsk;
+	u32	psc_spipcr;
+	u32	psc_spistat;
+	u32	psc_spievent;
+	u32	psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register. */
+#define PSC_SPICFG_RT_MASK	(3 << 30)
+#define PSC_SPICFG_RT_FIFO1	(0 << 30)
+#define PSC_SPICFG_RT_FIFO2	(1 << 30)
+#define PSC_SPICFG_RT_FIFO4	(2 << 30)
+#define PSC_SPICFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SPICFG_TT_MASK	(3 << 28)
+#define PSC_SPICFG_TT_FIFO1	(0 << 28)
+#define PSC_SPICFG_TT_FIFO2	(1 << 28)
+#define PSC_SPICFG_TT_FIFO4	(2 << 28)
+#define PSC_SPICFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE	(1 << 27)
+#define PSC_SPICFG_DE_ENABLE	(1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x)	((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x)	(((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2		0
+#define PSC_SPICFG_DIV4		1
+#define PSC_SPICFG_DIV8		2
+#define PSC_SPICFG_DIV16	3
+
+#define PSC_SPICFG_BI		(1 << 12)
+#define PSC_SPICFG_PSE		(1 << 11)
+#define PSC_SPICFG_CGE		(1 << 10)
+#define PSC_SPICFG_CDE		(1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x)	((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x)	(((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB		(1 << 3)
+#define PSC_SPICFG_MLF		(1 << 1)
+#define PSC_SPICFG_MO		(1 << 0)
+
+/* SPI Mask Register. */
+#define PSC_SPIMSK_MM		(1 << 16)
+#define PSC_SPIMSK_RR		(1 << 13)
+#define PSC_SPIMSK_RO		(1 << 12)
+#define PSC_SPIMSK_RU		(1 << 11)
+#define PSC_SPIMSK_TR		(1 << 10)
+#define PSC_SPIMSK_TO		(1 << 9)
+#define PSC_SPIMSK_TU		(1 << 8)
+#define PSC_SPIMSK_SD		(1 << 5)
+#define PSC_SPIMSK_MD		(1 << 4)
+#define PSC_SPIMSK_ALLMASK	(PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+				 PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+				 PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+				 PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register. */
+#define PSC_SPIPCR_RC		(1 << 6)
+#define PSC_SPIPCR_SP		(1 << 5)
+#define PSC_SPIPCR_SS		(1 << 4)
+#define PSC_SPIPCR_TC		(1 << 2)
+#define PSC_SPIPCR_MS		(1 << 0)
+
+/* SPI Status register (read only). */
+#define PSC_SPISTAT_RF		(1 << 13)
+#define PSC_SPISTAT_RE		(1 << 12)
+#define PSC_SPISTAT_RR		(1 << 11)
+#define PSC_SPISTAT_TF		(1 << 10)
+#define PSC_SPISTAT_TE		(1 << 9)
+#define PSC_SPISTAT_TR		(1 << 8)
+#define PSC_SPISTAT_SB		(1 << 5)
+#define PSC_SPISTAT_MB		(1 << 4)
+#define PSC_SPISTAT_DI		(1 << 2)
+#define PSC_SPISTAT_DR		(1 << 1)
+#define PSC_SPISTAT_SR		(1 << 0)
+
+/* SPI Event Register. */
+#define PSC_SPIEVNT_MM		(1 << 16)
+#define PSC_SPIEVNT_RR		(1 << 13)
+#define PSC_SPIEVNT_RO		(1 << 12)
+#define PSC_SPIEVNT_RU		(1 << 11)
+#define PSC_SPIEVNT_TR		(1 << 10)
+#define PSC_SPIEVNT_TO		(1 << 9)
+#define PSC_SPIEVNT_TU		(1 << 8)
+#define PSC_SPIEVNT_SD		(1 << 5)
+#define PSC_SPIEVNT_MD		(1 << 4)
+
+/* Transmit register control. */
+#define PSC_SPITXRX_LC		(1 << 29)
+#define PSC_SPITXRX_SR		(1 << 28)
+
+/* PSC in SMBus (I2C) Mode. */
+typedef struct	psc_smb {
+	u32	psc_sel;
+	u32	psc_ctrl;
+	u32	psc_smbcfg;
+	u32	psc_smbmsk;
+	u32	psc_smbpcr;
+	u32	psc_smbstat;
+	u32	psc_smbevnt;
+	u32	psc_smbtxrx;
+	u32	psc_smbtmr;
+} psc_smb_t;
+
+/* SMBus Config Register. */
+#define PSC_SMBCFG_RT_MASK	(3 << 30)
+#define PSC_SMBCFG_RT_FIFO1	(0 << 30)
+#define PSC_SMBCFG_RT_FIFO2	(1 << 30)
+#define PSC_SMBCFG_RT_FIFO4	(2 << 30)
+#define PSC_SMBCFG_RT_FIFO8	(3 << 30)
+
+#define PSC_SMBCFG_TT_MASK	(3 << 28)
+#define PSC_SMBCFG_TT_FIFO1	(0 << 28)
+#define PSC_SMBCFG_TT_FIFO2	(1 << 28)
+#define PSC_SMBCFG_TT_FIFO4	(2 << 28)
+#define PSC_SMBCFG_TT_FIFO8	(3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE	(1 << 27)
+#define PSC_SMBCFG_DE_ENABLE	(1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x)	(((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2		0
+#define PSC_SMBCFG_DIV4		1
+#define PSC_SMBCFG_DIV8		2
+#define PSC_SMBCFG_DIV16	3
+
+#define PSC_SMBCFG_GCE		(1 << 9)
+#define PSC_SMBCFG_SFM		(1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x)	(((x) & 0x7f) << 1)
+
+/* SMBus Mask Register. */
+#define PSC_SMBMSK_DN		(1 << 30)
+#define PSC_SMBMSK_AN		(1 << 29)
+#define PSC_SMBMSK_AL		(1 << 28)
+#define PSC_SMBMSK_RR		(1 << 13)
+#define PSC_SMBMSK_RO		(1 << 12)
+#define PSC_SMBMSK_RU		(1 << 11)
+#define PSC_SMBMSK_TR		(1 << 10)
+#define PSC_SMBMSK_TO		(1 << 9)
+#define PSC_SMBMSK_TU		(1 << 8)
+#define PSC_SMBMSK_SD		(1 << 5)
+#define PSC_SMBMSK_MD		(1 << 4)
+#define PSC_SMBMSK_ALLMASK	(PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+				 PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+				 PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+				 PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+				 PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register. */
+#define PSC_SMBPCR_DC		(1 << 2)
+#define PSC_SMBPCR_MS		(1 << 0)
+
+/* SMBus Status register (read only). */
+#define PSC_SMBSTAT_BB		(1 << 28)
+#define PSC_SMBSTAT_RF		(1 << 13)
+#define PSC_SMBSTAT_RE		(1 << 12)
+#define PSC_SMBSTAT_RR		(1 << 11)
+#define PSC_SMBSTAT_TF		(1 << 10)
+#define PSC_SMBSTAT_TE		(1 << 9)
+#define PSC_SMBSTAT_TR		(1 << 8)
+#define PSC_SMBSTAT_SB		(1 << 5)
+#define PSC_SMBSTAT_MB		(1 << 4)
+#define PSC_SMBSTAT_DI		(1 << 2)
+#define PSC_SMBSTAT_DR		(1 << 1)
+#define PSC_SMBSTAT_SR		(1 << 0)
+
+/* SMBus Event Register. */
+#define PSC_SMBEVNT_DN		(1 << 30)
+#define PSC_SMBEVNT_AN		(1 << 29)
+#define PSC_SMBEVNT_AL		(1 << 28)
+#define PSC_SMBEVNT_RR		(1 << 13)
+#define PSC_SMBEVNT_RO		(1 << 12)
+#define PSC_SMBEVNT_RU		(1 << 11)
+#define PSC_SMBEVNT_TR		(1 << 10)
+#define PSC_SMBEVNT_TO		(1 << 9)
+#define PSC_SMBEVNT_TU		(1 << 8)
+#define PSC_SMBEVNT_SD		(1 << 5)
+#define PSC_SMBEVNT_MD		(1 << 4)
+#define PSC_SMBEVNT_ALLCLR	(PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+				 PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+				 PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+				 PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+				 PSC_SMBEVNT_MD)
+
+/* Transmit register control. */
+#define PSC_SMBTXRX_RSR		(1 << 28)
+#define PSC_SMBTXRX_STP		(1 << 29)
+#define PSC_SMBTXRX_DATAMASK	0xff
+
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x)	(((x) & 0x03) << 30)
+#define PSC_SMBTMR_SET_PS(x)	(((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x)	(((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x)	(((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x)	(((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x)	(((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x)	(((x) & 0x1f) << 0)
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
new file mode 100644
index 0000000..2dc61e0
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#include <linux/types.h>
+
+#define AU1XXX_GPIO_BASE	200
+
+struct au1x00_gpio2 {
+	u32	dir;
+	u32	reserved;
+	u32	output;
+	u32	pinstate;
+	u32	inten;
+	u32	enable;
+};
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Not yet implemented */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
new file mode 100644
index 0000000..364cea2
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -0,0 +1,42 @@
+/*
+ *	include/asm-mips/mach-au1x00/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#else
+static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return __fixup_bigphys_addr(phys_addr, size);
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h
new file mode 100644
index 0000000..e387155
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/prom.h
@@ -0,0 +1,13 @@
+#ifndef __AU1X00_PROM_H
+#define __AU1X00_PROM_H
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *envname);
+extern int prom_get_ethernet_addr(char *ethernet_addr);
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/war.h b/arch/mips/include/asm/mach-au1x00/war.h
new file mode 100644
index 0000000..dd57d03
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H
+#define __ASM_MIPS_MACH_AU1X00_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
new file mode 100644
index 0000000..d008f47
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_BCM47XX_H
+#define __ASM_BCM47XX_H
+
+/* SSB bus */
+extern struct ssb_bus ssb_bcm47xx;
+
+#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
new file mode 100644
index 0000000..cfc8f4d
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ */
+
+#ifndef __BCM47XX_GPIO_H
+#define __BCM47XX_GPIO_H
+
+#define BCM47XX_EXTIF_GPIO_LINES	5
+#define BCM47XX_CHIPCO_GPIO_LINES	16
+
+extern int bcm47xx_gpio_to_irq(unsigned gpio);
+extern int bcm47xx_gpio_get_value(unsigned gpio);
+extern void bcm47xx_gpio_set_value(unsigned gpio, int value);
+extern int bcm47xx_gpio_direction_input(unsigned gpio);
+extern int bcm47xx_gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+       return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return bcm47xx_gpio_to_irq(gpio);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return bcm47xx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	bcm47xx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return bcm47xx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return bcm47xx_gpio_direction_output(gpio, value);
+}
+
+
+/* cansleep wrappers */
+#include <asm-generic/gpio.h>
+
+#endif /* __BCM47XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/war.h b/arch/mips/include/asm/mach-bcm47xx/war.h
new file mode 100644
index 0000000..4a2b798
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H
+#define __ASM_MIPS_MACH_BCM947XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h
new file mode 100644
index 0000000..5b9fce7
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cobalt.h
@@ -0,0 +1,22 @@
+/*
+ * The Cobalt board ID information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
+ */
+#ifndef __ASM_COBALT_H
+#define __ASM_COBALT_H
+
+extern int cobalt_board_id;
+
+#define COBALT_BRD_ID_QUBE1    0x3
+#define COBALT_BRD_ID_RAQ1     0x4
+#define COBALT_BRD_ID_QUBE2    0x5
+#define COBALT_BRD_ID_RAQ2     0x6
+
+#endif /* __ASM_COBALT_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
new file mode 100644
index 0000000..b3314cf
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_watch		0
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_inclusive_pcaches	0
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	0
+
+#ifdef CONFIG_64BIT
+#define cpu_has_llsc            0
+#else
+#define cpu_has_llsc            1
+#endif
+
+#define cpu_has_mips16		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_icache_snoops_remote_store	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
new file mode 100644
index 0000000..57c8c9a
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -0,0 +1,57 @@
+/*
+ * Cobalt IRQ definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ */
+#ifndef _ASM_COBALT_IRQ_H
+#define _ASM_COBALT_IRQ_H
+
+/*
+ * i8259 interrupts used on Cobalt:
+ *
+ *	8  - RTC
+ *	9  - PCI slot
+ *	14 - IDE0
+ *	15 - IDE1(no connector on board)
+ */
+#define I8259A_IRQ_BASE			0
+
+#define PCISLOT_IRQ			(I8259A_IRQ_BASE + 9)
+
+/*
+ * CPU interrupts used on Cobalt:
+ *
+ *	0 - Software interrupt 0 (unused)
+ *	1 - Software interrupt 0 (unused)
+ *	2 - cascade GT64111
+ *	3 - ethernet or SCSI host controller
+ *	4 - ethernet
+ *	5 - 16550 UART
+ *	6 - cascade i8259
+ *	7 - CP0 counter
+ */
+#define MIPS_CPU_IRQ_BASE		16
+
+#define GT641XX_CASCADE_IRQ		(MIPS_CPU_IRQ_BASE + 2)
+#define RAQ2_SCSI_IRQ			(MIPS_CPU_IRQ_BASE + 3)
+#define ETH0_IRQ			(MIPS_CPU_IRQ_BASE + 3)
+#define QUBE1_ETH0_IRQ			(MIPS_CPU_IRQ_BASE + 4)
+#define ETH1_IRQ			(MIPS_CPU_IRQ_BASE + 4)
+#define SERIAL_IRQ			(MIPS_CPU_IRQ_BASE + 5)
+#define SCSI_IRQ			(MIPS_CPU_IRQ_BASE + 5)
+#define I8259_CASCADE_IRQ		(MIPS_CPU_IRQ_BASE + 6)
+
+#define GT641XX_IRQ_BASE		24
+
+#include <asm/irq_gt641xx.h>
+
+#define NR_IRQS					(GT641XX_PCI_INT3_IRQ + 1)
+
+#endif /* _ASM_COBALT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
new file mode 100644
index 0000000..ae9c552
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _COBALT_MACH_GT64120_H
+#define _COBALT_MACH_GT64120_H
+
+/*
+ * Cobalt uses GT64111. GT64111 is almost the same as GT64120.
+ */
+
+#define GT64120_BASE	CKSEG1ADDR(GT_DEF_BASE)
+
+#endif /* _COBALT_MACH_GT64120_H */
diff --git a/arch/mips/include/asm/mach-cobalt/war.h b/arch/mips/include/asm/mach-cobalt/war.h
new file mode 100644
index 0000000..97884fd
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_COBALT_WAR_H
+#define __ASM_MIPS_MACH_COBALT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
new file mode 100644
index 0000000..27f2610
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -0,0 +1,230 @@
+/*
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 	0xB9800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP	0x0400
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+#define BCSR_RESETS_TV		0x0010
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX	0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+
+#define BCSR_LEDS_DECIMALS	0x0003
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+
+#define SMC91C111_PHYS_ADDR	0x19000300
+#define SMC91C111_INT		DB1200_ETH_INT
+
+#define IDE_PHYS_ADDR		0x18800000
+#define IDE_REG_SHIFT		5
+#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
+#define IDE_INT 		DB1200_IDE_INT
+#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE		128
+
+#define NAND_PHYS_ADDR		0x20000000
+
+/*
+ * External Interrupts for DBAu1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ *
+ *   Example: IDE bis pos is  = 64 - 64
+ *            ETH bit pos is  = 65 - 64
+ */
+enum external_pb1200_ints {
+	DB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
+
+	DB1200_IDE_INT		= DB1200_INT_BEGIN,
+	DB1200_ETH_INT,
+	DB1200_PC0_INT,
+	DB1200_PC0_STSCHG_INT,
+	DB1200_PC1_INT,
+	DB1200_PC1_STSCHG_INT,
+	DB1200_DC_INT,
+	DB1200_FLASHBUSY_INT,
+	DB1200_PC0_INSERT_INT,
+	DB1200_PC0_EJECT_INT,
+	DB1200_PC1_INSERT_INT,
+	DB1200_PC1_EJECT_INT,
+	DB1200_SD0_INSERT_INT,
+	DB1200_SD0_EJECT_INT,
+
+	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
+};
+
+
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT	DB1200_PC0_INT
+#define BOARD_PC1_INT	DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_DB1200_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
new file mode 100644
index 0000000..1a515b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -0,0 +1,179 @@
+/*
+ * AMD Alchemy DBAu1x00 Reference Boards
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1X00_H
+#define __ASM_DB1X00_H
+
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#ifdef CONFIG_MIPS_DB1550
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 	0xAF000000
+#define NAND_PHYS_ADDR		0x20000000
+
+#else
+#define BCSR_KSEG1_ADDR 0xAE000000
+#endif
+
+/*
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
+ */
+typedef volatile struct
+{
+	/*00*/	unsigned short whoami;
+	unsigned short reserved0;
+	/*04*/	unsigned short status;
+	unsigned short reserved1;
+	/*08*/	unsigned short switches;
+	unsigned short reserved2;
+	/*0C*/	unsigned short resets;
+	unsigned short reserved3;
+	/*10*/	unsigned short pcmcia;
+	unsigned short reserved4;
+	/*14*/	unsigned short specific;
+	unsigned short reserved5;
+	/*18*/	unsigned short leds;
+	unsigned short reserved6;
+	/*1C*/	unsigned short swreset;
+	unsigned short reserved7;
+
+} BCSR;
+
+
+/*
+ * Register/mask bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID		0x000F
+#define BCSR_WHOAMI_CPLD		0x00F0
+#define BCSR_WHOAMI_BOARD		0x0F00
+
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SWAPBOOT		0x2000
+#define BCSR_STATUS_FLASHDEN		0xC000
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0_PWR		0x0040
+#define BCSR_BOARD_SD1_PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SD0_WP		0x4000
+#define BCSR_BOARD_SD1_WP		0x8000
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+#define BCSR_SWRESET_RESET		0x0080
+
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
+ * lower 2 bits.
+ * These defines are here rather than an Au1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 	1
+
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_DB1X00_H */
diff --git a/arch/mips/include/asm/mach-dec/mc146818rtc.h b/arch/mips/include/asm/mach-dec/mc146818rtc.h
new file mode 100644
index 0000000..6724e99
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/mc146818rtc.h
@@ -0,0 +1,43 @@
+/*
+ * RTC definitions for DECstation style attached Dallas DS1287 chip.
+ *
+ * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998 by Harald Koerfgen
+ * Copyright (C) 2002, 2005  Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_RTC_DEC_H
+#define __ASM_MIPS_DEC_RTC_DEC_H
+
+#include <linux/types.h>
+#include <asm/addrspace.h>
+#include <asm/dec/system.h>
+
+extern volatile u8 *dec_rtc_base;
+
+#define ARCH_RTC_LOCATION
+
+#define RTC_PORT(x)	CPHYSADDR((long)dec_rtc_base)
+#define RTC_IO_EXTENT	dec_kn_slot_size
+#define RTC_IOMAPPED	0
+#undef RTC_IRQ
+
+#define RTC_DEC_YEAR	0x3f	/* Where we store the real year on DECs.  */
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	return dec_rtc_base[addr * 4];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	dec_rtc_base[addr * 4] = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MIPS_DEC_RTC_DEC_H */
diff --git a/arch/mips/include/asm/mach-dec/war.h b/arch/mips/include/asm/mach-dec/war.h
new file mode 100644
index 0000000..ca5e2ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_DEC_WAR_H
+#define __ASM_MIPS_MACH_DEC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_DEC_WAR_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h
new file mode 100644
index 0000000..5439eb8
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/irq.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_EMMA2RH_IRQ_H
+#define __ASM_MACH_EMMA2RH_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/war.h b/arch/mips/include/asm/mach-emma2rh/war.h
new file mode 100644
index 0000000..b660a4c
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H
+#define __ASM_MIPS_MACH_EMMA2RH_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */
diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
new file mode 100644
index 0000000..107104c
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Basler eXcite has an RM9122 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store	0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h
new file mode 100644
index 0000000..4c29ba4
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite.h
@@ -0,0 +1,154 @@
+#ifndef __EXCITE_H__
+#define __EXCITE_H__
+
+#include <linux/init.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+
+#define EXCITE_CPU_EXT_CLOCK 100000000
+
+#if !defined(__ASSEMBLY__)
+void __init excite_kgdb_init(void);
+void excite_procfs_init(void);
+extern unsigned long memsize;
+extern char modetty[];
+extern u32 unit_id;
+#endif
+
+/* Base name for XICAP devices */
+#define XICAP_NAME	"xicap_gpi"
+
+/* OCD register offsets */
+#define LKB0		0x0038
+#define LKB5		0x0128
+#define LKM5		0x012C
+#define LKB7		0x0138
+#define LKM7		0x013c
+#define LKB8		0x0140
+#define LKM8		0x0144
+#define LKB9		0x0148
+#define LKM9		0x014c
+#define LKB10		0x0150
+#define LKM10		0x0154
+#define LKB11		0x0158
+#define LKM11		0x015c
+#define LKB12		0x0160
+#define LKM12		0x0164
+#define LKB13		0x0168
+#define LKM13		0x016c
+#define LDP0		0x0200
+#define LDP1		0x0210
+#define LDP2		0x0220
+#define LDP3		0x0230
+#define INTPIN0		0x0A40
+#define INTPIN1		0x0A44
+#define INTPIN2		0x0A48
+#define INTPIN3		0x0A4C
+#define INTPIN4		0x0A50
+#define INTPIN5		0x0A54
+#define INTPIN6		0x0A58
+#define INTPIN7		0x0A5C
+
+
+
+
+/* TITAN register offsets */
+#define CPRR		0x0004
+#define CPDSR		0x0008
+#define CPTC0R		0x000c
+#define CPTC1R		0x0010
+#define CPCFG0		0x0020
+#define CPCFG1		0x0024
+#define CPDST0A		0x0028
+#define CPDST0B		0x002c
+#define CPDST1A		0x0030
+#define CPDST1B		0x0034
+#define CPXDSTA		0x0038
+#define CPXDSTB		0x003c
+#define CPXCISRA	0x0048
+#define CPXCISRB	0x004c
+#define CPGIG0ER	0x0050
+#define CPGIG1ER	0x0054
+#define CPGRWL		0x0068
+#define CPURSLMT	0x00f8
+#define UACFG		0x0200
+#define UAINTS		0x0204
+#define SDRXFCIE	0x4828
+#define SDTXFCIE	0x4928
+#define INTP0Status0	0x1B00
+#define INTP0Mask0	0x1B04
+#define INTP0Set0	0x1B08
+#define INTP0Clear0	0x1B0C
+#define GXCFG		0x5000
+#define GXDMADRPFX	0x5018
+#define GXDMA_DESCADR	0x501c
+#define GXCH0TDESSTRT	0x5054
+
+/* IRQ definitions */
+#define NMICONFIG		0xac0
+#define TITAN_MSGINT	0xc4
+#define TITAN_IRQ	((TITAN_MSGINT / 0x20) + 2)
+#define FPGA0_MSGINT	0x5a
+#define FPGA0_IRQ	((FPGA0_MSGINT / 0x20) + 2)
+#define FPGA1_MSGINT	0x7b
+#define FPGA1_IRQ	((FPGA1_MSGINT / 0x20) + 2)
+#define PHY_MSGINT	0x9c
+#define PHY_IRQ		((PHY_MSGINT   / 0x20) + 2)
+
+#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
+/* Pre-release units used interrupt pin #9 */
+#define USB_IRQ		11
+#else
+/* Re-designed units use interrupt pin #1 */
+#define USB_MSGINT	0x39
+#define USB_IRQ		((USB_MSGINT / 0x20) + 2)
+#endif
+#define TIMER_IRQ	12
+
+
+/* Device address ranges */
+#define EXCITE_OFFS_OCD		0x1fffc000
+#define	EXCITE_SIZE_OCD		(16 * 1024)
+#define EXCITE_PHYS_OCD		CPHYSADDR(EXCITE_OFFS_OCD)
+#define EXCITE_ADDR_OCD		CKSEG1ADDR(EXCITE_OFFS_OCD)
+
+#define EXCITE_OFFS_SCRAM 	0x1fffa000
+#define	EXCITE_SIZE_SCRAM	(8 << 10)
+#define EXCITE_PHYS_SCRAM 	CPHYSADDR(EXCITE_OFFS_SCRAM)
+#define EXCITE_ADDR_SCRAM 	CKSEG1ADDR(EXCITE_OFFS_SCRAM)
+
+#define EXCITE_OFFS_PCI_IO	0x1fff8000
+#define	EXCITE_SIZE_PCI_IO	(8 << 10)
+#define EXCITE_PHYS_PCI_IO	CPHYSADDR(EXCITE_OFFS_PCI_IO)
+#define EXCITE_ADDR_PCI_IO 	CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
+
+#define EXCITE_OFFS_TITAN	0x1fff0000
+#define EXCITE_SIZE_TITAN	(32 << 10)
+#define EXCITE_PHYS_TITAN	CPHYSADDR(EXCITE_OFFS_TITAN)
+#define EXCITE_ADDR_TITAN	CKSEG1ADDR(EXCITE_OFFS_TITAN)
+
+#define EXCITE_OFFS_PCI_MEM	0x1ffe0000
+#define EXCITE_SIZE_PCI_MEM	(64 << 10)
+#define EXCITE_PHYS_PCI_MEM	CPHYSADDR(EXCITE_OFFS_PCI_MEM)
+#define EXCITE_ADDR_PCI_MEM	CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
+
+#define EXCITE_OFFS_FPGA	0x1ffdc000
+#define EXCITE_SIZE_FPGA	(16 << 10)
+#define EXCITE_PHYS_FPGA	CPHYSADDR(EXCITE_OFFS_FPGA)
+#define EXCITE_ADDR_FPGA	CKSEG1ADDR(EXCITE_OFFS_FPGA)
+
+#define EXCITE_OFFS_NAND	0x1ffd8000
+#define EXCITE_SIZE_NAND	(16 << 10)
+#define EXCITE_PHYS_NAND	CPHYSADDR(EXCITE_OFFS_NAND)
+#define EXCITE_ADDR_NAND	CKSEG1ADDR(EXCITE_OFFS_NAND)
+
+#define EXCITE_OFFS_BOOTROM	0x1f000000
+#define EXCITE_SIZE_BOOTROM	(8 << 20)
+#define EXCITE_PHYS_BOOTROM	CPHYSADDR(EXCITE_OFFS_BOOTROM)
+#define EXCITE_ADDR_BOOTROM	CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
+
+/* FPGA address offsets */
+#define EXCITE_FPGA_DPR		0x0104	/* dual-ported ram */
+#define EXCITE_FPGA_SYSCTL	0x0200	/* system control register block */
+
+#endif /* __EXCITE_H__ */
diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h
new file mode 100644
index 0000000..0a1ef69
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_fpga.h
@@ -0,0 +1,80 @@
+#ifndef EXCITE_FPGA_H_INCLUDED
+#define EXCITE_FPGA_H_INCLUDED
+
+
+/**
+ * Address alignment of the individual FPGA bytes.
+ * The address arrangement of the individual bytes of the FPGA is two
+ * byte aligned at the embedded MK2 platform.
+ */
+#ifdef EXCITE_CCI_FPGA_MK2
+typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
+#else
+typedef unsigned char excite_cci_fpga_align_t;
+#endif
+
+
+/**
+ * Size of Dual Ported RAM.
+ */
+#define EXCITE_DPR_SIZE 263
+
+
+/**
+ * Size of Reserved Status Fields in Dual Ported RAM.
+ */
+#define EXCITE_DPR_STATUS_SIZE 7
+
+
+
+/**
+ * FPGA.
+ * Hardware register layout of the FPGA interface. The FPGA must accessed
+ * byte wise solely.
+ * @see EXCITE_CCI_DPR_MK2
+ */
+typedef struct excite_fpga {
+
+	/**
+	 * Dual Ported RAM.
+	 */
+	excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
+
+	/**
+	 * Status.
+	 */
+	excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
+
+#ifdef EXCITE_CCI_FPGA_MK2
+	/**
+	 * RM9000 Interrupt.
+	 * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
+	 */
+	excite_cci_fpga_align_t rm9k_int;
+#else
+	/**
+	 * MK2 Interrupt.
+	 * Write access initiates interrupt at the ARM processor of the MK2.
+	 */
+	excite_cci_fpga_align_t mk2_int;
+
+	excite_cci_fpga_align_t gap[0x1000-0x10f];
+
+	/**
+	 * IRQ Source/Acknowledge.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_src;
+
+	/**
+	 * IRQ Mask.
+	 * Set bits enable the related interrupt.
+	 */
+	excite_cci_fpga_align_t rm9k_irq_mask;
+#endif
+
+
+} excite_fpga;
+
+
+
+#endif	/* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h
new file mode 100644
index 0000000..c4cf614
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_nandflash.h
@@ -0,0 +1,7 @@
+#ifndef __EXCITE_NANDFLASH_H__
+#define __EXCITE_NANDFLASH_H__
+
+/* Resource names */
+#define EXCITE_NANDFLASH_RESOURCE_REGS	"excite_nandflash_regs"
+
+#endif /* __EXCITE_NANDFLASH_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h
new file mode 100644
index 0000000..94705a4
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_eth.h
@@ -0,0 +1,23 @@
+#if !defined(__RM9K_ETH_H__)
+#define __RM9K_ETH_H__
+
+#define RM9K_GE_NAME			"rm9k_ge"
+
+/* Resource names */
+#define RM9K_GE_RESOURCE_MAC      	"rm9k_ge_mac"
+#define RM9K_GE_RESOURCE_MSTAT      	"rm9k_ge_mstat"
+#define RM9K_GE_RESOURCE_PKTPROC	"rm9k_ge_pktproc"
+#define RM9K_GE_RESOURCE_XDMA		"rm9k_ge_xdma"
+#define RM9K_GE_RESOURCE_FIFO_RX  	"rm9k_ge_fifo_rx"
+#define RM9K_GE_RESOURCE_FIFO_TX  	"rm9k_ge_fifo_tx"
+#define RM9K_GE_RESOURCE_FIFOMEM_RX  	"rm9k_ge_fifo_memory_rx"
+#define RM9K_GE_RESOURCE_FIFOMEM_TX  	"rm9k_ge_fifo_memory_tx"
+#define RM9K_GE_RESOURCE_PHY      	"rm9k_ge_phy"
+#define RM9K_GE_RESOURCE_DMADESC_RX  	"rm9k_ge_dmadesc_rx"
+#define RM9K_GE_RESOURCE_DMADESC_TX  	"rm9k_ge_dmadesc_tx"
+#define RM9K_GE_RESOURCE_IRQ_MAIN	"rm9k_ge_irq_main"
+#define RM9K_GE_RESOURCE_IRQ_PHY	"rm9k_ge_irq_phy"
+#define RM9K_GE_RESOURCE_GPI_SLICE	"rm9k_ge_gpi_slice"
+#define RM9K_GE_RESOURCE_MDIO_CHANNEL	"rm9k_ge_mdio_channel"
+
+#endif /* !defined(__RM9K_ETH_H__) */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
new file mode 100644
index 0000000..3fa3c08
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
@@ -0,0 +1,12 @@
+#ifndef __RM9K_WDT_H__
+#define __RM9K_WDT_H__
+
+/* Device name */
+#define WDT_NAME		"wdt_gpi"
+
+/* Resource names */
+#define WDT_RESOURCE_REGS	"excite_watchdog_regs"
+#define WDT_RESOURCE_IRQ	"excite_watchdog_irq"
+#define WDT_RESOURCE_COUNTER	"excite_watchdog_counter"
+
+#endif /* __RM9K_WDT_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
new file mode 100644
index 0000000..0095777
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
@@ -0,0 +1,16 @@
+#ifndef __EXCITE_XICAP_H__
+#define __EXCITE_XICAP_H__
+
+
+/* Resource names */
+#define XICAP_RESOURCE_FIFO_RX		"xicap_fifo_rx"
+#define XICAP_RESOURCE_FIFO_TX		"xicap_fifo_tx"
+#define XICAP_RESOURCE_XDMA 		"xicap_xdma"
+#define XICAP_RESOURCE_DMADESC		"xicap_dmadesc"
+#define XICAP_RESOURCE_PKTPROC  	"xicap_pktproc"
+#define XICAP_RESOURCE_IRQ		"xicap_irq"
+#define XICAP_RESOURCE_GPI_SLICE	"xicap_gpi_slice"
+#define XICAP_RESOURCE_FIFO_BLK		"xicap_fifo_blocks"
+#define XICAP_RESOURCE_PKT_STREAM	"xicap_pkt_stream"
+
+#endif /* __EXCITE_XICAP_H__ */
diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h
new file mode 100644
index 0000000..1f82180
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
+#define __ASM_MIPS_MACH_EXCITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		1
+#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR	0
+
+#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
new file mode 100644
index 0000000..7c185bb
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+
+/* Intentionally empty file ...  */
+
+#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
new file mode 100644
index 0000000..76e04e7
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	return virt_to_phys(addr);
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+	struct page *page)
+{
+	return page_to_phys(page);
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_COHERENT
+	return 1;
+#endif
+#ifdef CONFIG_DMA_NONCOHERENT
+	return 0;
+#endif
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
new file mode 100644
index 0000000..001a8ce
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_FLOPPY_H
+#define __ASM_MACH_GENERIC_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cachectl.h>
+#include <asm/dma.h>
+#include <asm/floppy.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+
+/*
+ * How to access the FDC's registers.
+ */
+static inline unsigned char fd_inb(unsigned int port)
+{
+	return inb_p(port);
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	outb_p(value, port);
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	enable_dma(FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	disable_dma(FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return request_dma(FLOPPY_DMA, "floppy");
+}
+
+static inline void fd_free_dma(void)
+{
+	free_dma(FLOPPY_DMA);
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+	clear_dma_ff(FLOPPY_DMA);
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	set_dma_mode(FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *addr)
+{
+	set_dma_addr(FLOPPY_DMA, (unsigned long) addr);
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	set_dma_count(FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return get_dma_residue(FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+	enable_irq(FLOPPY_IRQ);
+}
+
+static inline void fd_disable_irq(void)
+{
+	disable_irq(FLOPPY_IRQ);
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return 0x3f0;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-generic/gpio.h b/arch/mips/include/asm/mach-generic/gpio.h
new file mode 100644
index 0000000..b4e7020
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/gpio.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+#ifdef CONFIG_GPIOLIB
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#else
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+#endif
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
new file mode 100644
index 0000000..73008f7
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994-1996  Linus Torvalds & authors
+ *
+ * Copied from i386; many of the especially older MIPS or ISA-based platforms
+ * are basically identical.  Using this file probably implies i8259 PIC
+ * support in a system but the very least interrupt numbers 0 - 15 need to
+ * be put aside for legacy devices.
+ */
+#ifndef __ASM_MACH_GENERIC_IDE_H
+#define __ASM_MACH_GENERIC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/pci.h>
+#include <linux/stddef.h>
+#include <asm/processor.h>
+
+static __inline__ int ide_probe_legacy(void)
+{
+#ifdef CONFIG_PCI
+	struct pci_dev *dev;
+	/*
+	 * This can be called on the ide_setup() path, super-early in
+	 * boot.  But the down_read() will enable local interrupts,
+	 * which can cause some machines to crash.  So here we detect
+	 * and flag that situation and bail out early.
+	 */
+	if (no_pci_devices())
+		return 0;
+	dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL);
+	if (dev)
+		goto found;
+	dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
+	if (dev)
+		goto found;
+	return 0;
+found:
+	pci_dev_put(dev);
+	return 1;
+#elif defined(CONFIG_EISA) || defined(CONFIG_ISA)
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/* MIPS port and memory-mapped I/O string operations.  */
+static inline void __ide_flush_prologue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_disable();
+#endif
+}
+
+static inline void __ide_flush_epilogue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_enable();
+#endif
+}
+
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+	if (cpu_has_dc_aliases) {
+		unsigned long end = addr + size;
+
+		while (addr < end) {
+			local_flush_data_cache_page((void *)addr);
+			addr += PAGE_SIZE;
+		}
+	}
+}
+
+/*
+ * insw() and gang might be called with interrupts disabled, so we can't
+ * send IPIs for flushing due to the potencial of deadlocks, see the comment
+ * above smp_call_function() in arch/mips/kernel/smp.c.  We work around the
+ * problem by disabling preemption so we know we actually perform the flush
+ * on the processor that actually has the lines to be flushed which hopefully
+ * is even better for performance anyway.
+ */
+static inline void __ide_insw(unsigned long port, void *addr,
+	unsigned int count)
+{
+	__ide_flush_prologue();
+	insw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+	__ide_flush_prologue();
+	insl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+	unsigned long count)
+{
+	__ide_flush_prologue();
+	outsw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+	unsigned long count)
+{
+	__ide_flush_prologue();
+	outsl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	readsw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	readsl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	writesw(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+	__ide_flush_prologue();
+	writesl(port, addr, count);
+	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
+}
+
+/* ide_insw calls insw, not __ide_insw.  Why? */
+#undef insw
+#undef insl
+#undef outsw
+#undef outsl
+#define insw(port, addr, count) __ide_insw(port, addr, count)
+#define insl(port, addr, count) __ide_insl(port, addr, count)
+#define outsw(port, addr, count) __ide_outsw(port, addr, count)
+#define outsl(port, addr, count) __ide_outsl(port, addr, count)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_MACH_GENERIC_IDE_H */
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
new file mode 100644
index 0000000..b379938
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -0,0 +1,34 @@
+/*
+ *	include/asm-mips/mach-generic/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_GENERIC_IOREMAP_H
+#define __ASM_MACH_GENERIC_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
new file mode 100644
index 0000000..70d9a25
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_IRQ_H
+#define __ASM_MACH_GENERIC_IRQ_H
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+#ifdef CONFIG_I8259
+#ifndef I8259A_IRQ_BASE
+#define I8259A_IRQ_BASE	0
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#ifdef CONFIG_I8259
+#define MIPS_CPU_IRQ_BASE 16
+#else
+#define MIPS_CPU_IRQ_BASE 0
+#endif /* CONFIG_I8259 */
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
+
+#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
new file mode 100644
index 0000000..7e66505
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+.macro	kernel_entry_setup
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+	.macro	smp_slave_setup
+	.endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h
new file mode 100644
index 0000000..b8e6deb
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_GENERIC_KMALLOC_H
+#define __ASM_MACH_GENERIC_KMALLOC_H
+
+
+#ifndef CONFIG_DMA_COHERENT
+/*
+ * Total overkill for most systems but need as a safe default.
+ * Set this one if any device in the system might do non-coherent DMA.
+ */
+#define ARCH_KMALLOC_MINALIGN	128
+#endif
+
+#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h
new file mode 100644
index 0000000..f49dc99
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mangle-port.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H
+#define __ASM_MACH_GENERIC_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time.  Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses.  The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		le16_to_cpu(x)
+# define __mem_ioswabw(a, x)	(x)
+# define ioswabl(a, x)		le32_to_cpu(x)
+# define __mem_ioswabl(a, x)	(x)
+# define ioswabq(a, x)		le64_to_cpu(x)
+# define __mem_ioswabq(a, x)	(x)
+
+#else
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h
new file mode 100644
index 0000000..0b9a942
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_GENERIC_MC146818RTC_H
+#define __ASM_MACH_GENERIC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
new file mode 100644
index 0000000..c9fa4b1
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_GENERIC_SPACES_H
+#define _ASM_MACH_GENERIC_SPACES_H
+
+#include <linux/const.h>
+
+/*
+ * This gives the physical RAM offset.
+ */
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET		_AC(0, UL)
+#endif
+
+#ifdef CONFIG_32BIT
+
+#define CAC_BASE		_AC(0x80000000, UL)
+#define IO_BASE			_AC(0xa0000000, UL)
+#define UNCAC_BASE		_AC(0xa0000000, UL)
+
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc0000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		_AC(0x20000000, UL)
+#endif
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifndef CAC_BASE
+#ifdef CONFIG_DMA_NONCOHERENT
+#define CAC_BASE		_AC(0x9800000000000000, UL)
+#else
+#define CAC_BASE		_AC(0xa800000000000000, UL)
+#endif
+#endif
+
+#ifndef IO_BASE
+#define IO_BASE			_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef UNCAC_BASE
+#define UNCAC_BASE		_AC(0x9000000000000000, UL)
+#endif
+
+#ifndef MAP_BASE
+#define MAP_BASE		_AC(0xc000000000000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ * Fixme: 59 bits is a fictive number and makes assumptions about processors
+ * in the distant future.  Nobody will care for a few years :-)
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START		(_AC(1, UL) << _AC(59, UL))
+#endif
+
+#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * This handles the memory map.
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(CAC_BASE + PHYS_OFFSET)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/arch/mips/include/asm/mach-generic/topology.h b/arch/mips/include/asm/mach-generic/topology.h
new file mode 100644
index 0000000..5428f33
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
new file mode 100644
index 0000000..9c87351
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP22 with a variety of processors so we can't use defaults for everything.
+ */
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0		/* Needs to change for R8000 */
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip22/ds1286.h b/arch/mips/include/asm/mach-ip22/ds1286.h
new file mode 100644
index 0000000..f19f1ea
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/ds1286.h
@@ -0,0 +1,18 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP22_DS1286_H
+#define __ASM_MACH_IP22_DS1286_H
+
+#include <asm/sgi/hpc3.h>
+
+#define rtc_read(reg)		(hpc3c0->rtcregs[(reg)] & 0xff)
+#define rtc_write(data, reg)	do { hpc3c0->rtcregs[(reg)] = (data); } while(0)
+
+#endif /* __ASM_MACH_IP22_DS1286_H */
diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h
new file mode 100644
index 0000000..7f9fa6f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/spaces.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP22_SPACES_H
+#define _ASM_MACH_IP22_SPACES_H
+
+
+#ifdef CONFIG_64BIT
+
+#define PAGE_OFFSET		0xffffffff80000000UL
+
+#define CAC_BASE		0xffffffff80000000
+#define IO_BASE			0xffffffffa0000000
+#define UNCAC_BASE		0xffffffffa0000000
+#define MAP_BASE		0xc000000000000000
+
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_MACH_IP22_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h
new file mode 100644
index 0000000..a44fa96
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP22_WAR_H
+#define __ASM_MIPS_MACH_IP22_WAR_H
+
+/*
+ * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	1
+#define R4600_V1_HIT_CACHEOP_WAR	1
+#define R4600_V2_HIT_CACHEOP_WAR	1
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP22_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
new file mode 100644
index 0000000..7d3112b
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP27 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store	1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_6k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_8k_cache	0
+#define cpu_has_tx39_cache	0
+
+#define cpu_has_inclusive_pcaches	1
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	64
+#define cpu_scache_line_size()	128
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
new file mode 100644
index 0000000..ed7e622
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
+#define __ASM_MACH_IP27_DMA_COHERENCE_H
+
+#include <asm/pci/bridge.h>
+
+#define pdev_to_baddr(pdev, addr) \
+	(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
+#define dev_to_baddr(dev, addr) \
+	pdev_to_baddr(to_pci_dev(dev), (addr))
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
+
+	return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
+
+	return pa;
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr & ~(0xffUL << 56);
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 1;		/* IP27 non-cohernet mode is unsupported */
+}
+
+#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h
new file mode 100644
index 0000000..cf4384b
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/irq.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Kanoj Sarcar
+ */
+#ifndef __ASM_MACH_IP27_IRQ_H
+#define __ASM_MACH_IP27_IRQ_H
+
+/*
+ * A hardwired interrupt number is completly stupid for this system - a
+ * large configuration might have thousands if not tenthousands of
+ * interrupts.
+ */
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_IP27_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
new file mode 100644
index 0000000..624d66c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H
+#define __ASM_MACH_IP27_KERNEL_ENTRY_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/klkernvars.h>
+
+/*
+ * Returns the local nasid into res.
+ */
+	.macro GET_NASID_ASM res
+	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+	ld	\res, (\res)
+	and	\res, NSRI_NODEID_MASK
+	dsrl	\res, NSRI_NODEID_SHFT
+	.endm
+
+/*
+ * Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+	.macro	kernel_entry_setup
+	GET_NASID_ASM	t1
+	move		t2, t1			# text and data are here
+	MAPPED_KERNEL_SETUP_TLB
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+	.macro	smp_slave_setup
+	GET_NASID_ASM	t1
+	dli	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+		    KLDIR_OFF_POINTER + CAC_BASE
+	dsll	t1, NASID_SHFT
+	or	t0, t0, t1
+	ld	t0, 0(t0)			# t0 points to kern_vars struct
+	lh	t1, KV_RO_NASID_OFFSET(t0)
+	lh	t2, KV_RW_NASID_OFFSET(t0)
+	MAPPED_KERNEL_SETUP_TLB
+
+	/*
+	 * We might not get launched at the address the kernel is linked to,
+	 * so we jump there.
+	 */
+	PTR_LA  t0, 0f
+	jr      t0
+0:
+	.endm
+
+#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h
new file mode 100644
index 0000000..426bd04
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_IP27_KMALLOC_H
+#define __ASM_MACH_IP27_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h
new file mode 100644
index 0000000..f6e4912
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mangle-port.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_MANGLE_PORT_H
+#define __ASM_MACH_IP27_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
new file mode 100644
index 0000000..986a3b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+
+#define pa_to_nid(addr)		NASID_TO_COMPACT_NODEID(NASID_GET(addr))
+
+#define LEVELS_PER_SLICE        128
+
+struct slice_data {
+	unsigned long irq_enable_mask[2];
+	int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+	kern_vars_t	kern_vars;
+	DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
+	cpumask_t	h_cpus;
+	unsigned long slice_map;
+	unsigned long irq_alloc_mask[2];
+	struct slice_data slice[2];
+};
+
+struct node_data {
+	struct pglist_data pglist;
+	struct hub_data hub;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
+#define hub_data(n)		(&__node_data[(n)]->hub)
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
new file mode 100644
index 0000000..b18802a
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP27_SPACES_H
+#define _ASM_MACH_IP27_SPACES_H
+
+/*
+ * IP27 uses the R10000's uncached attribute feature.  Attribute 3 selects
+ * uncached memory addressing.
+ */
+
+#define HSPEC_BASE		0x9000000000000000
+#define IO_BASE			0x9200000000000000
+#define MSPEC_BASE		0x9400000000000000
+#define UNCAC_BASE		0x9600000000000000
+
+#define TO_MSPEC(x)		(MSPEC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_HSPEC(x)		(HSPEC_BASE | ((x) & TO_PHYS_MASK))
+
+#define HIGHMEM_START		(~0UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP27_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
new file mode 100644
index 0000000..7785bec
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H	1
+
+#include <asm/sn/hub.h>
+#include <asm/sn/types.h>
+#include <asm/mmzone.h>
+
+struct cpuinfo_ip27 {
+//	cpuid_t		p_cpuid;	/* PROM assigned cpuid */
+	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
+	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
+	unsigned char	p_slice;	/* Physical position on node board */
+#if 0
+	unsigned long		loops_per_sec;
+	unsigned long		ipi_count;
+	unsigned long		irq_attempt[NR_IRQS];
+	unsigned long		smp_local_irq_count;
+	unsigned long		prof_multiplier;
+	unsigned long		prof_counter;
+#endif
+};
+
+extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
+
+#define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
+#define parent_node(node)	(node)
+#define node_to_cpumask(node)	(hub_data(node)->h_cpus)
+#define node_to_first_cpu(node)	(first_cpu(node_to_cpumask(node)))
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+
+#define node_distance(from, to)	(__node_distances[(from)][(to)])
+
+/* sched_domains SD_NODE_INIT for SGI IP27 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h
new file mode 100644
index 0000000..e2ddcc9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP27_WAR_H
+#define __ASM_MIPS_MACH_IP27_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			1
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP27_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
new file mode 100644
index 0000000..9a53b32
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ * 6/2004	pf
+ */
+#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP28 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0 /* see probe_pcache() */
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_icache_snoops_remote_store  1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+
+#define cpu_has_inclusive_pcaches	1
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	64
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip28/ds1286.h b/arch/mips/include/asm/mach-ip28/ds1286.h
new file mode 100644
index 0000000..471bb9a
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/ds1286.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_IP28_DS1286_H
+#define __ASM_MACH_IP28_DS1286_H
+#include <asm/mach-ip22/ds1286.h>
+#endif /* __ASM_MACH_IP28_DS1286_H */
diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h
new file mode 100644
index 0000000..05aabb2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ * 2004	pf
+ */
+#ifndef _ASM_MACH_IP28_SPACES_H
+#define _ASM_MACH_IP28_SPACES_H
+
+#define CAC_BASE		0xa800000000000000
+
+#define HIGHMEM_START		(~0UL)
+
+#define PHYS_OFFSET		_AC(0x20000000, UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP28_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h
new file mode 100644
index 0000000..a1baafa
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP28_WAR_H
+#define __ASM_MIPS_MACH_IP28_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			1
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP28_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
new file mode 100644
index 0000000..6782fcc
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ilya A. Volynets-Evenbakh
+ * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * R5000 has an interesting "restriction":  ll(d)/sc(d)
+ * instructions to XKPHYS region simply do uncached bus
+ * requests. This breaks all the atomic bitops functions.
+ * so, for 64bit IP32 kernel we just don't use ll/sc.
+ * This does not affect luserland.
+ */
+#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT)
+#define cpu_has_llsc		0
+#else
+#define cpu_has_llsc		1
+#endif
+
+/* Settings which are common for all ip32 CPUs */
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_mips16		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_4k_cache	1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
new file mode 100644
index 0000000..a5511eb
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
+#define __ASM_MACH_IP32_DMA_COHERENCE_H
+
+#include <asm/ip32/crime.h>
+
+struct device;
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ *    native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
+
+	if (dev == NULL)
+		pa += CRIME_HI_MEM_BASE;
+
+	return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	dma_addr_t pa;
+
+	pa = page_to_phys(page) & RAM_OFFSET_MASK;
+
+	if (dev == NULL)
+		pa += CRIME_HI_MEM_BASE;
+
+	return pa;
+}
+
+/* This is almost certainly wrong but it's what dma-ip32.c used to use  */
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	unsigned long addr = dma_addr & RAM_OFFSET_MASK;
+
+	if (dma_addr >= 256*1024*1024)
+		addr += CRIME_HI_MEM_BASE;
+
+	return addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;		/* IP32 is non-cohernet */
+}
+
+#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip32/kmalloc.h b/arch/mips/include/asm/mach-ip32/kmalloc.h
new file mode 100644
index 0000000..b1e0be6
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/kmalloc.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_MACH_IP32_KMALLOC_H
+#define __ASM_MACH_IP32_KMALLOC_H
+
+
+#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000)
+#define ARCH_KMALLOC_MINALIGN	32
+#else
+#define ARCH_KMALLOC_MINALIGN	128
+#endif
+
+#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip32/mangle-port.h b/arch/mips/include/asm/mach-ip32/mangle-port.h
new file mode 100644
index 0000000..f1d0f17
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mangle-port.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ladislav Michl
+ * Copyright (C) 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP32_MANGLE_PORT_H
+#define __ASM_MACH_IP32_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	((port) ^ 3)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+# define ioswabb(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define ioswabw(a, x)		(x)
+# define __mem_ioswabw(a, x)	cpu_to_le16(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabl(a, x)	cpu_to_le32(x)
+# define ioswabq(a, x)		(x)
+# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
new file mode 100644
index 0000000..c28ba8d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2000 Harald Koerfgen
+ *
+ * RTC routines for IP32 style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP32_MC146818RTC_H
+#define __ASM_MACH_IP32_MC146818RTC_H
+
+#include <asm/ip32/mace.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+
+static unsigned char CMOS_READ(unsigned long addr)
+{
+	return mace->isa.rtc[addr << 8];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	mace->isa.rtc[addr << 8] = data;
+}
+
+/*
+ * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-)
+ */
+#define mc146818_decode_year(year) ((year) + 2000)
+
+#define RTC_ALWAYS_BCD	0
+
+#endif /* __ASM_MACH_IP32_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h
new file mode 100644
index 0000000..d194056
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP32_WAR_H
+#define __ASM_MIPS_MACH_IP32_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_IP32_WAR_H */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
new file mode 100644
index 0000000..d66979a
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
+#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
+
+#include <asm/jazzdma.h>
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+	return vdma_alloc(virt_to_phys(addr), size);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+	return vdma_alloc(page_to_phys(page), PAGE_SIZE);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return vdma_log2phys(dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+	vdma_free(dma_addr);
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h
new file mode 100644
index 0000000..56e9ca6
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/floppy.h
@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_FLOPPY_H
+#define __ASM_MACH_JAZZ_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/pgtable.h>
+
+static inline unsigned char fd_inb(unsigned int port)
+{
+	unsigned char c;
+
+	c = *(volatile unsigned char *) port;
+	udelay(1);
+
+	return c;
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+	*(volatile unsigned char *) port = value;
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+	vdma_enable(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+	vdma_disable(JAZZ_FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+	return 0;
+}
+
+static inline void fd_free_dma(void)
+{
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+	vdma_set_mode(JAZZ_FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *a)
+{
+	vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a)));
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+	vdma_set_count(JAZZ_FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+	return vdma_get_residue(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+}
+
+static inline void fd_disable_irq(void)
+{
+}
+
+static inline int fd_request_irq(void)
+{
+	return request_irq(FLOPPY_IRQ, floppy_interrupt,
+	                   IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+	free_irq(FLOPPY_IRQ, NULL);
+}
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+	return JAZZ_FDC_BASE;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+	unsigned long mem;
+
+	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+	if(!mem)
+		return 0;
+	vdma_alloc(CPHYSADDR(mem), size);	/* XXX error checking */
+
+	return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	vdma_free(vdma_phys2log(CPHYSADDR(addr)));
+	free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+	/* XXX This is wrong for machines with ED 2.88mb disk drives like the
+	   Olivetti M700.  Anyway, we should suck this from the ARC
+	   firmware.  */
+	if (n == 0)
+		return 4;	/* 3,5", 1.44mb */
+
+	return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
new file mode 100644
index 0000000..987f727
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2007 Thomas Bogendoerfer
+ *
+ * RTC routines for Jazz style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_JAZZ_MC146818RTC_H
+#define __ASM_MACH_JAZZ_MC146818RTC_H
+
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/jazz.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return *(volatile char *)JAZZ_RTC_BASE;
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	*(volatile char *)JAZZ_RTC_BASE = data;
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) + 1980)
+
+#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-jazz/war.h b/arch/mips/include/asm/mach-jazz/war.h
new file mode 100644
index 0000000..6158ee8
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H
+#define __ASM_MIPS_MACH_JAZZ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
new file mode 100644
index 0000000..3a28241
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/irq.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MACH_LASAT_IRQ_H
+#define _ASM_MACH_LASAT_IRQ_H
+
+#define LASAT_CASCADE_IRQ	(MIPS_CPU_IRQ_BASE + 2)
+
+#define LASAT_IRQ_BASE		8
+#define LASAT_IRQ_END		23
+
+#define NR_IRQS			24
+
+#include_next <irq.h>
+
+#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
new file mode 100644
index 0000000..1a9ad45
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
+#define _ASM_GT64120_LASAT_GT64120_DEP_H
+
+/*
+ *   GT64120 config space base address on Lasat 100
+ */
+#define GT64120_BASE	(KSEG1ADDR(0x14000000))
+
+/*
+ *   PCI Bus allocation
+ *
+ *   (Guessing ...)
+ */
+#define GT_PCI_MEM_BASE	0x12000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x10000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+#define GT_ISA_IO_BASE	PCI_IO_BASE
+
+#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-lasat/war.h b/arch/mips/include/asm/mach-lasat/war.h
new file mode 100644
index 0000000..bb1e032
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LASAT_WAR_H
+#define __ASM_MIPS_MACH_LASAT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h
new file mode 100644
index 0000000..7e91477
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+					  size_t size)
+{
+	return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+					       struct page *page)
+{
+	return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr & 0x7fffffff;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
new file mode 100644
index 0000000..ed5147e
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
+#define __ASM_MACH_LEMOTE_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h
new file mode 100644
index 0000000..05f89e0
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
+#define __ASM_MIPS_MACH_LEMOTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
new file mode 100644
index 0000000..7f3e3f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#ifdef CONFIG_CPU_HAS_LLSC
+#define cpu_has_llsc		1
+#else
+#define cpu_has_llsc		0
+#endif
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
new file mode 100644
index 0000000..9b9da26
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
new file mode 100644
index 0000000..0b793e7
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Chris Dearman (chris@mips.com)
+ * Copyright (C) 2007 Mips Technologies, Inc.
+ */
+#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+
+	.macro	kernel_entry_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+	mfc0	t0, CP0_CONFIG
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 1
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 2
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 3
+	and	t0, 1<<2
+	bnez	t0, 0f
+9:
+	/* Assume we came from YAMON... */
+	PTR_LA	v0, 0x9fc00534	/* YAMON print */
+	lw	v0, (v0)
+	move	a0, zero
+	PTR_LA	a1, nonmt_processor
+	jal	v0
+
+	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
+	lw	v0, (v0)
+	li	a0, 1
+	jal	v0
+
+1:	b	1b
+
+	__INITDATA
+nonmt_processor:
+	.asciz	"SMTC kernel requires the MT ASE to run\n"
+	__FINIT
+0:
+#endif
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute C code.
+ */
+	.macro	smp_slave_setup
+	.endm
+
+#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h
new file mode 100644
index 0000000..0f86314
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h
@@ -0,0 +1,19 @@
+/*
+ *  This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ *  The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+
+#define MIPS_GT_BASE	0x1be00000
+
+extern unsigned long _pcictrl_gt64120;
+/*
+ *   GT64120 config space base address
+ */
+#define GT64120_BASE	_pcictrl_gt64120
+
+#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h
new file mode 100644
index 0000000..ea612f3
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h
@@ -0,0 +1,48 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2003 by Ralf Baechle
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * RTC routines for Malta style attached PIIX4 device, which contains a
+ * Motorola MC146818A-compatible Real Time Clock.
+ */
+#ifndef __ASM_MACH_MALTA_MC146818RTC_H
+#define __ASM_MACH_MALTA_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	return inb(MALTA_RTC_DAT_REG);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb(addr, MALTA_RTC_ADR_REG);
+	outb(data, MALTA_RTC_DAT_REG);
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+
+#endif /* __ASM_MACH_MALTA_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h
new file mode 100644
index 0000000..7c6931d
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		1
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
new file mode 100644
index 0000000..779b022
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ */
+#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		0
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+/* #define cpu_has_fpu		? */
+/* #define cpu_has_32fpr	? */
+#define cpu_has_counter		1
+/* #define cpu_has_watch	? */
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+/* #define cpu_has_cache_cdex_p	? */
+/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_prefetch	? */
+#define cpu_has_mcheck		1
+/* #define cpu_has_ejtag	? */
+#define cpu_has_llsc		1
+/* #define cpu_has_vtag_icache	? */
+/* #define cpu_has_dc_aliases	? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex		0
+/* #define cpu_has_64bits	? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-mipssim/war.h b/arch/mips/include/asm/mach-mipssim/war.h
new file mode 100644
index 0000000..c8a74a3
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H
+#define __ASM_MIPS_MACH_MIPSSIM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
new file mode 100644
index 0000000..622c587
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
+#define __ASM_MACH_AU1XX_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define RTC_PORT(x)	(0x0c000000 + (x))
+#define RTC_IRQ		8
+#define PB1500_RTC_ADDR 0x0c000000
+
+static inline unsigned char CMOS_READ(unsigned long offset)
+{
+	offset <<= 2;
+	return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
+{
+	offset <<= 2;
+	au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+#define RTC_ALWAYS_BCD	1
+
+#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h
new file mode 100644
index 0000000..6d1ff90
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h
@@ -0,0 +1,87 @@
+/*
+ * Alchemy Semi Pb1000 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1000_H
+#define __ASM_PB1000_H
+
+/* PCMCIA PB1000 specific defines */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR		0xBE000000
+#  define PCR_SLOT_0_VPP0	(1 << 0)
+#  define PCR_SLOT_0_VPP1	(1 << 1)
+#  define PCR_SLOT_0_VCC0	(1 << 2)
+#  define PCR_SLOT_0_VCC1	(1 << 3)
+#  define PCR_SLOT_0_RST	(1 << 4)
+#  define PCR_SLOT_1_VPP0	(1 << 8)
+#  define PCR_SLOT_1_VPP1	(1 << 9)
+#  define PCR_SLOT_1_VCC0	(1 << 10)
+#  define PCR_SLOT_1_VCC1	(1 << 11)
+#  define PCR_SLOT_1_RST	(1 << 12)
+
+#define PB1000_MDR		0xBE000004
+#  define MDR_PI		(1 << 5)	/* PCMCIA int latch  */
+#  define MDR_EPI		(1 << 14)	/* enable PCMCIA int */
+#  define MDR_CPI		(1 << 15)	/* clear  PCMCIA int  */
+
+#define PB1000_ACR1		0xBE000008
+#  define ACR1_SLOT_0_CD1	(1 << 0)	/* card detect 1	*/
+#  define ACR1_SLOT_0_CD2	(1 << 1)	/* card detect 2	*/
+#  define ACR1_SLOT_0_READY	(1 << 2)	/* ready		*/
+#  define ACR1_SLOT_0_STATUS	(1 << 3)	/* status change	*/
+#  define ACR1_SLOT_0_VS1	(1 << 4)	/* voltage sense 1	*/
+#  define ACR1_SLOT_0_VS2	(1 << 5)	/* voltage sense 2	*/
+#  define ACR1_SLOT_0_INPACK	(1 << 6)	/* inpack pin status	*/
+#  define ACR1_SLOT_1_CD1	(1 << 8)	/* card detect 1	*/
+#  define ACR1_SLOT_1_CD2	(1 << 9)	/* card detect 2	*/
+#  define ACR1_SLOT_1_READY	(1 << 10)	/* ready		*/
+#  define ACR1_SLOT_1_STATUS	(1 << 11)	/* status change	*/
+#  define ACR1_SLOT_1_VS1	(1 << 12)	/* voltage sense 1	*/
+#  define ACR1_SLOT_1_VS2	(1 << 13)	/* voltage sense 2	*/
+#  define ACR1_SLOT_1_INPACK	(1 << 14)	/* inpack pin status	*/
+
+#define CPLD_AUX0		0xBE00000C
+#define CPLD_AUX1		0xBE000010
+#define CPLD_AUX2		0xBE000014
+
+/* Voltage levels */
+
+/* VPPEN1 - VPPEN0 */
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V	((1 << 1) | (0 << 0))
+#define VPP_3V	((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
+
+/* VCCEN1 - VCCEN0 */
+#define VCC_3V	((0 << 1) | (1 << 0))
+#define VCC_5V	((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+#endif /* __ASM_PB1000_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
new file mode 100644
index 0000000..b1a60f1
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi Pb1100 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT		0xAE000000
+#define BOARD_STATUS_REG	0xAE000004
+#  define PB1100_ROM_SEL	(1 << 15)
+#  define PB1100_ROM_SIZ	(1 << 14)
+#  define PB1100_SWAP_BOOT	(1 << 13)
+#  define PB1100_FLASH_WP	(1 << 12)
+#  define PB1100_ROM_H_STS	(1 << 11)
+#  define PB1100_ROM_L_STS	(1 << 10)
+#  define PB1100_FLASH_H_STS	(1 << 9)
+#  define PB1100_FLASH_L_STS	(1 << 8)
+#  define PB1100_SRAM_SIZ	(1 << 7)
+#  define PB1100_TSC_BUSY	(1 << 6)
+#  define PB1100_PCMCIA_VS_MASK (3 << 4)
+#  define PB1100_RS232_CD	(1 << 3)
+#  define PB1100_RS232_CTS	(1 << 2)
+#  define PB1100_RS232_DSR	(1 << 1)
+#  define PB1100_RS232_RI	(1 << 0)
+
+#define PB1100_IRDA_RS232	0xAE00000C
+#  define PB1100_IRDA_FULL	(0 << 14)	/* full power		*/
+#  define PB1100_IRDA_SHUTDOWN	(1 << 14)
+#  define PB1100_IRDA_TT	(2 << 14)	/* 2/3 power		*/
+#  define PB1100_IRDA_OT	(3 << 14)	/* 1/3 power		*/
+#  define PB1100_IRDA_FIR	(1 << 13)
+
+#define PCMCIA_BOARD_REG	0xAE000010
+#  define PB1100_SD_WP1_RO	(1 << 15)	/* read only		*/
+#  define PB1100_SD_WP0_RO	(1 << 14)	/* read only		*/
+#  define PB1100_SD_PWR1	(1 << 11)	/* applies power to SD1 */
+#  define PB1100_SD_PWR0	(1 << 10)	/* applies power to SD0 */
+#  define PB1100_SEL_SD_CONN1	(1 << 9)
+#  define PB1100_SEL_SD_CONN0	(1 << 8)
+#  define PC_DEASSERT_RST	(1 << 7)
+#  define PC_DRV_EN		(1 << 4)
+
+#define PB1100_G_CONTROL	0xAE000014	/* graphics control	*/
+
+#define PB1100_RST_VDDI 	0xAE00001C
+#  define PB1100_SOFT_RESET	(1 << 15)	/* clear to reset the board */
+#  define PB1100_VDDI_MASK	0x1F
+
+#define PB1100_LEDS		0xAE000018
+
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0  is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED		0xAE000018
+
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK  0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1100_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
new file mode 100644
index 0000000..c8618df
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -0,0 +1,259 @@
+/*
+ * AMD Alchemy Pb1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP	0x0400
+#define BCSR_STATUS_SD1WP	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM	0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_SD1MUX	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+#define BCSR_BOARD_SD1PWR	0x0080
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define SMC91C111_PHYS_ADDR	0x0D000300
+#define SMC91C111_INT		PB1200_ETH_INT
+
+#define IDE_PHYS_ADDR		0x0C800000
+#define IDE_REG_SHIFT		5
+#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
+#define IDE_INT 		PB1200_IDE_INT
+#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE		128
+
+#define NAND_PHYS_ADDR 	0x1C000000
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an Au1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ *
+ *   Example: IDE bis pos is  = 64 - 64
+ *            ETH bit pos is  = 65 - 64
+ */
+enum external_pb1200_ints {
+	PB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
+
+	PB1200_IDE_INT		= PB1200_INT_BEGIN,
+	PB1200_ETH_INT,
+	PB1200_PC0_INT,
+	PB1200_PC0_STSCHG_INT,
+	PB1200_PC1_INT,
+	PB1200_PC1_STSCHG_INT,
+	PB1200_DC_INT,
+	PB1200_FLASHBUSY_INT,
+	PB1200_PC0_INSERT_INT,
+	PB1200_PC0_EJECT_INT,
+	PB1200_PC1_INSERT_INT,
+	PB1200_PC1_EJECT_INT,
+	PB1200_SD0_INSERT_INT,
+	PB1200_SD0_EJECT_INT,
+	PB1200_SD1_INSERT_INT,
+	PB1200_SD1_EJECT_INT,
+
+	PB1200_INT_END		= PB1200_INT_BEGIN + 15
+};
+
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT	PB1200_PC0_INT
+#define BOARD_PC1_INT	PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_PB1200_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
new file mode 100644
index 0000000..da51a2e
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h
@@ -0,0 +1,49 @@
+/*
+ * Alchemy Semi Pb1500 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+#define IDENT_BOARD_REG 	0xAE000000
+#define BOARD_STATUS_REG	0xAE000004
+#define PCI_BOARD_REG		0xAE000010
+#define PCMCIA_BOARD_REG	0xAE000010
+#  define PC_DEASSERT_RST	      0x80
+#  define PC_DRV_EN		      0x10
+#define PB1500_G_CONTROL	0xAE000014
+#define PB1500_RST_VDDI 	0xAE00001C
+#define PB1500_LEDS		0xAE000018
+
+#define PB1500_HEX_LED		0xAF000004
+#define PB1500_HEX_LED_BLANK	0xAF000008
+
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK  0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1500_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
new file mode 100644
index 0000000..6704a11
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -0,0 +1,177 @@
+/*
+ * AMD Alchemy Semi PB1550 Referrence Board
+ * Board Registers defines.
+ *
+ * Copyright 2004 Embedded Edge LLC.
+ * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1550_H
+#define __ASM_PB1550_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
+
+#define BCSR_PHYS_ADDR 0xAF000000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 pci;
+		u16 reserved5;
+	/*18*/	u16 leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_PCMCIA0FI	0x0010
+#define BCSR_STATUS_PCMCIA1FI	0x0020
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH	0x0080
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_ROMBUSY	0x0200
+#define BCSR_STATUS_USBOTGID	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+#define BCSR_STATUS_U3RXD	0x8000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_PHY0	0x0001
+#define BCSR_RESETS_PHY1	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_WSC		0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_DMAREQ	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_PCI_M66EN		0x0001
+#define BCSR_PCI_M33		0x0100
+#define BCSR_PCI_EXTERNARB	0x0200
+#define BCSR_PCI_GPIO200RST	0x0400
+#define BCSR_PCI_CLKOUT		0x0800
+#define BCSR_PCI_CFGHOST	0x1000
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_USER_ONLY
+#endif
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+
+#define NAND_CS 1
+
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_PB1550_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h
new file mode 100644
index 0000000..bb0a56c
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE	0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK     0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK        0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK           0x01ff0000
+#define PNX8550_CM_PLL_M_MASK           0x00003f00
+#define PNX8550_CM_PLL_P_MASK           0x0000000c
+#define PNX8550_CM_PLL_PD_MASK          0x00000002
+
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h
new file mode 100644
index 0000000..07aa85e
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE	0xBBE63000
+#define PNX8550_GLB2_BASE	0xBBE4d000
+#define PNX8550_RESET_BASE      0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O	*(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+     0:DACs are enabled and are working normally
+     1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD      0x2
+/*   Bit 0:Enable of PCI inta output
+     0 = Disable PCI inta output
+     1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM	        0x12000000
+#define PNX8550_PCIMEM_SIZE	0x08000000
+#define PNX8550_PCIIO	        0x1c000000
+#define PNX8550_PCIIO_SIZE	0x02000000	/* 32M */
+
+#define PNX8550_PORT_BASE	KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE	0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0	 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1         (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT   30
+#define PNX8550_GPIO_MC_30_BIT   28
+#define PNX8550_GPIO_MC_29_BIT   26
+#define PNX8550_GPIO_MC_28_BIT   24
+#define PNX8550_GPIO_MC_27_BIT   22
+#define PNX8550_GPIO_MC_26_BIT   20
+#define PNX8550_GPIO_MC_25_BIT   18
+#define PNX8550_GPIO_MC_24_BIT   16
+#define PNX8550_GPIO_MC_23_BIT   14
+#define PNX8550_GPIO_MC_22_BIT   12
+#define PNX8550_GPIO_MC_21_BIT   10
+#define PNX8550_GPIO_MC_20_BIT   8
+#define PNX8550_GPIO_MC_19_BIT   6
+#define PNX8550_GPIO_MC_18_BIT   4
+#define PNX8550_GPIO_MC_17_BIT   2
+#define PNX8550_GPIO_MC_16_BIT   0
+
+#define PNX8550_GPIO_MODE_PRIMOP    0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR    0x3
+
+// RESET module
+#define PNX8550_RST_CTL             *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE           *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG     *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N     0x8
+#define PNX8550_RST_DO_SW_RST          0x4
+#define PNX8550_RST_REL_SYS_RST_OUT    0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h
new file mode 100644
index 0000000..0e0668b
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE	0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x)	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT	8
+#define PNX8550_INT_CP0_MIN	0
+#define PNX8550_INT_CP0_MAX	(PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ        2
+#define MIPS_CPU_TIMER_IRQ      7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT	71
+#define PNX8550_INT_GIC_MIN	(PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX	(PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF              (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS   (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4         (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB                (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1           (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2           (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3           (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4           (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5           (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6           (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12        (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1              (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2              (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1               (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2               (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1          (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2          (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1              (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2              (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR               (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22         (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC              (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC              (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25         (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG        (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1  (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG         (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1     (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2     (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1              (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO               (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1       (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1      (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2       (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2      (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2   (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK                (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS         (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM           (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS         (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM           (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA             (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA               (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1          (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2          (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA           (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE       (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI   (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA   (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM  (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS            (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD                (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0       (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8      (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR        (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0              (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1              (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2              (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3              (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4              (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5              (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6              (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7              (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY      (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3               (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68        (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2              (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4               (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT       3
+#define PNX8550_INT_TIMER_MIN	       (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX          (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1             (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2             (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3             (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG           PNX8550_INT_TIMER3
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 0000000..bdde00c
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID  0x3F1F41FF    /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC      0xBC000000  /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE        32      /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE        32      /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT        256     /* Instruction cache set count */
+#define DCACHE_SET_COUNT        128     /* Data cache set count */
+
+#define ICACHE_SET_SIZE         (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE         (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+	.macro	kernel_entry_setup
+	.set	push
+	.set	noreorder
+	/*
+	 * PNX8550 entry point, when running a non compressed
+	 * kernel. When loading a zImage, the head.S code in
+	 * arch/mips/zboot/pnx8550 will init the caches and,
+	 * decompress the kernel, and branch to kernel_entry.
+		 */
+cache_begin:	li	t0, (1<<28)
+	mtc0	t0, CP0_STATUS /* cp0 usable */
+	HAZARD_CP0
+
+	mtc0 	zero, CP0_CAUSE
+	HAZARD_CP0
+
+
+	/* Set static virtual to phys address translation and TLB disabled */
+	mfc0 	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	and	t0, ~((1<<19) | (1<<20))     /* TLB/MAP cleared */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+	init_icache
+	nop
+	init_dcache
+	nop
+
+	cachePr4450ICReset
+	nop
+
+	cachePr4450DCReset
+	nop
+
+	/* read ConfigPR into t0 */
+	mfc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/*  enable the TLB */
+	or      t0, (1<<19)
+
+	/* disable the ICACHE: at least 10x slower */
+	/* or      t0, (1<<26) */
+
+	/* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set  */
+	/* or      t0, (1<<27) */
+
+	and	t0, CO_CONFIGPR_VALID
+
+	/* enable TLB. */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+cache_end:
+	/* Setup CMEM_0 to MMIO address space, 2MB */
+	lui    t0, 0x1BE0
+	addi   t0, t0, 0x3
+	mtc0   $8, $22, 4
+	nop
+
+	/* Setup CMEM_1, 128MB */
+	lui    t0, 0x1000
+	addi   t0, t0, 0xf
+	mtc0   $8, $22, 5
+	nop
+
+
+	/* Setup CMEM_2, 32MB */
+	lui    t0, 0x1C00
+	addi   t0, t0, 0xb
+	mtc0   $8, $22, 6
+	nop
+
+	/* Setup CMEM_3, 0MB */
+	lui    t0, 0x0
+	addi   t0, t0, 0x0
+	mtc0   $8, $22, 7
+	nop
+
+	/* Enable cache */
+	mfc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	and	t0, t0, 0xFFFFFFF8
+	or	t0, t0, 3
+	mtc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	init_icache
+	.set	push
+	.set	noreorder
+
+	/* Get Cache Configuration */
+	mfc0	t3, CP0_CONFIG, 1
+	HAZARD_CP0
+
+	/* get cache Line size */
+
+	srl   t1, t3, 19   /* C0_CONFIGPR_IL_SHIFT */
+	andi  t1, t1, 0x7  /* C0_CONFIGPR_IL_MASK */
+	beq   t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+	nop
+	addiu t0, t1, 1
+	ori   t1, zero, 1
+	sllv  t1, t1, t0
+
+	/* get max cache Index */
+	srl   t2, t3, 22  /* C0_CONFIGPR_IS_SHIFT */
+	andi  t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+	addiu t0, t2, 6
+	ori   t2, zero, 1
+	sllv  t2, t2, t0
+
+	/* get max cache way */
+	srl   t3, t3, 16  /* C0_CONFIGPR_IA_SHIFT */
+	andi  t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+	addiu t3, t3, 1
+
+	/* total no of cache lines */
+	multu t2, t3             /* max index * max way */
+	mflo  t2
+	addiu t2, t2, -1
+
+	move  t0, zero
+pr4450_next_instruction_cache_set:
+	cache  Index_Invalidate_I, 0(t0)
+	addu  t0, t0, t1         /* add bytes in a line */
+	bne   t2, zero, pr4450_next_instruction_cache_set
+	addiu t2, t2, -1   /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+	.set	pop
+	.endm
+
+	.macro	init_dcache
+	.set	push
+	.set	noreorder
+	move t1, zero
+
+	/* Store Tag Information */
+	mtc0	zero, CP0_TAGLO, 0
+	HAZARD_CP0
+
+	mtc0	zero, CP0_TAGHI, 0
+	HAZARD_CP0
+
+	/* Cache size is 16384 = 512 lines x 32 bytes per line */
+	or       t2, zero, (128*4)-1  /* 512 lines  */
+	/* Invalidate all lines */
+2:
+	cache Index_Store_Tag_D, 0(t1)
+	addiu    t2, t2, -1
+	bne      t2, zero, 2b
+	addiu    t1, t1, 32        /* 32 bytes in a line */
+	.set pop
+	.endm
+
+	.macro	cachePr4450ICReset
+	.set	push
+	.set	noreorder
+
+	/* Save CP0 status reg on entry; */
+	/* disable interrupts during cache reset */
+	mfc0    t0, CP0_STATUS      /* T0 = interrupt status on entry */
+	HAZARD_CP0
+
+	mtc0    zero, CP0_STATUS   /* disable CPU interrupts */
+	HAZARD_CP0
+
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+	icache_invd_loop:
+	/* 9 == register t1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(0 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY0 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(1 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY1 */
+
+	addiu   t1, t1, ICACHE_LINE_SIZE    /* T1 = next cache line index */
+	bne     t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+	addiu   t2, t2, -1        /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the instruction cache tag */
+	/* that drive the way selection tri-state bus drivers, by doing a */
+	/* dummy load while the instruction cache is still disabled. */
+	/* TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS        /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	cachePr4450DCReset
+	.set	push
+	.set	noreorder
+	mfc0    t0, CP0_STATUS           /* T0 = interrupt status on entry */
+	HAZARD_CP0
+	mtc0    zero, CP0_STATUS         /* disable CPU interrupts */
+	HAZARD_CP0
+
+	/* Writeback/invalidate entire data cache sets/ways/lines */
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+	dcache_wbinvd_loop:
+	/* 9 == register t1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(0 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY0 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(1 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY1 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(2 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY2 */
+	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(3 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY3 */
+
+	addiu   t1, t1, DCACHE_LINE_SIZE  /* T1 = next data cache line index */
+	bne     t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+	addiu   t2, t2, -1          /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the data cache tag that drive the way
+	selection tri-state bus drivers, by doing a dummy load while the
+	data cache is still in the disabled mode.  TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS       /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h
new file mode 100644
index 0000000..aefbc51
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR   0x10000000
+#define PNX8550_PCIXIO_BASE	 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR  *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR    *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT    0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK     0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH    0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW     0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH    0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW     0x00004000
+#define PNX8550_XIO_SEL0_WAIT        0x00000200
+#define PNX8550_XIO_SEL0_OFFSET      0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360  0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR    0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND   0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE    0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB    0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB   0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB   0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB   0x00000006
+#define PNX8550_XIO_SEL0_ENAB        0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT)  | \
+                              (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+	                      (PNX8550_XIO_SEL0_REN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+                              (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WAIT*4)    | \
+			      (PNX8550_XIO_SEL0_OFFSET*0)  | \
+			      (PNX8550_XIO_SEL0_TYPE_NAND) | \
+			      (PNX8550_XIO_SEL0_SIZE_32MB) | \
+			      (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING        0x00000200
+#define PNX8550_GPXIO_DONE           0x00000100
+#define PNX8550_GPXIO_CLR_DONE       0x00000080
+#define PNX8550_GPXIO_INIT           0x00000040
+#define PNX8550_GPXIO_READ_CMD       0x00000010
+#define PNX8550_GPXIO_BEN            0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB       0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA   0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH     0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2    0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1    0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0    0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH     0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3    0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2    0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1    0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0    0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x)   ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x)   (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK          0x00004000
+#define PNX8550_XIO_INT_COMPL        0x00002000
+#define PNX8550_XIO_INT_NONSUP       0x00000200
+#define PNX8550_XIO_INT_ABORT        0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO     0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR    0x00000100
+#define PNX8550_DMA_CTRL_BURST_8     0x00000000
+#define PNX8550_DMA_CTRL_BURST_16    0x00000020
+#define PNX8550_DMA_CTRL_BURST_32    0x00000040
+#define PNX8550_DMA_CTRL_BURST_64    0x00000060
+#define PNX8550_DMA_CTRL_BURST_128   0x00000080
+#define PNX8550_DMA_CTRL_BURST_256   0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512   0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA    0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE    0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ    0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE   0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5	(1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4	(1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_EN_PERR5	(1<<5)
+#define PNX8550_DMA_INT_EN_PERR4	(1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5	(1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4	(1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT	(1<<1)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h
new file mode 100644
index 0000000..b921508
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR                     0x20
+#define PCI_CMD_IOW                     0x30
+#define PCI_CMD_CONFIG_READ             0xa0
+#define PCI_CMD_CONFIG_WRITE            0xb0
+
+#define PCI_IO_TIMEOUT                  1000
+#define PCI_IO_RETRY			5
+/* Timeout for IO and CFG accesses.
+   This is in 1/1024 th of a jiffie(=10ms)
+   i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT          40
+#define PCI_IO_JIFFIES_SHIFT            10
+
+#define PCI_BYTE_ENABLE_MASK		0x0000000f
+#define PCI_CFG_BUS_SHIFT               16
+#define PCI_CFG_FUNC_SHIFT              8
+#define PCI_CFG_REG_SHIFT               2
+
+#define PCI_BASE                  0x1be00000
+#define PCI_SETUP                 0x00040010
+#define PCI_DIS_REQGNT           (1<<30)
+#define PCI_DIS_REQGNTA          (1<<29)
+#define PCI_DIS_REQGNTB          (1<<28)
+#define PCI_D2_SUPPORT           (1<<27)
+#define PCI_D1_SUPPORT           (1<<26)
+#define PCI_EN_TA                (1<<24)
+#define PCI_EN_PCI2MMI           (1<<23)
+#define PCI_EN_XIO               (1<<22)
+#define PCI_BASE18_PREF          (1<<21)
+#define SIZE_16M                 0x3
+#define SIZE_32M                 0x4
+#define SIZE_64M                 0x5
+#define SIZE_128M                0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN      (1<<17)
+#define PCI_SETUP_BASE14_PREF    (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN      (1<<11)
+#define PCI_SETUP_BASE10_PREF    (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN   (1<<1)
+#define PCI_SETUP_PCIARB_EN      (1<<0)
+
+#define PCI_CTRL                  0x040014
+#define PCI_SWPB_DCS_PCI         (1<<16)
+#define PCI_SWPB_PCI_PCI         (1<<15)
+#define PCI_SWPB_PCI_DCS         (1<<14)
+#define PCI_REG_WR_POST          (1<<13)
+#define PCI_XIO_WR_POST          (1<<12)
+#define PCI_PCI2_WR_POST         (1<<13)
+#define PCI_PCI1_WR_POST         (1<<12)
+#define PCI_SERR_SEEN            (1<<11)
+#define PCI_B10_SPEC_RD          (1<<6)
+#define PCI_B14_SPEC_RD          (1<<5)
+#define PCI_B18_SPEC_RD          (1<<4)
+#define PCI_B10_NOSUBWORD        (1<<3)
+#define PCI_B14_NOSUBWORD        (1<<2)
+#define PCI_B18_NOSUBWORD        (1<<1)
+#define PCI_RETRY_TMREN          (1<<0)
+
+#define PCI_BASE1_LO              0x040018
+#define PCI_BASE1_HI              0x04001C
+#define PCI_BASE2_LO              0x040020
+#define PCI_BASE2_HI              0x040024
+#define PCI_RDLIFETIM             0x040028
+#define PCI_GPPM_ADDR             0x04002C
+#define PCI_GPPM_WDAT             0x040030
+#define PCI_GPPM_RDAT             0x040034
+#define PCI_GPPM_CTRL             0x040038
+#define GPPM_DONE                (1<<10)
+#define INIT_PCI_CYCLE           (1<<9)
+#define GPPM_CMD(X)              (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X)           ((X)&0xf)
+#define PCI_UNLOCKREG             0x04003C
+#define UNLOCK_SSID(X)           (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X)          (((X)&0xff)<<0)
+#define UNLOCK_MAGIC             0xCA
+#define PCI_DEV_VEND_ID           0x040040
+#define DEVICE_ID(X)             (((X)>>16)&0xffff)
+#define VENDOR_ID(X)             (((X)&0xffff))
+#define PCI_CFG_CMDSTAT           0x040044
+#define PCI_CFG_STATUS(X)            (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X)           ((X)&0xffff)
+#define PCI_CLASS_REV             0x040048
+#define PCI_CLASSCODE(X)         (((X)>>8)&0xffffff)
+#define PCI_REVID(X)             ((X)&0xff)
+#define PCI_LAT_TMR     0x04004c
+#define PCI_BASE10      0x040050
+#define PCI_BASE14      0x040054
+#define PCI_BASE18      0x040058
+#define PCI_SUBSYS_ID   0x04006c
+#define PCI_CAP_PTR     0x040074
+#define PCI_CFG_MISC    0x04007c
+#define PCI_PMC         0x040080
+#define PCI_PWR_STATE   0x040084
+#define PCI_IO          0x040088
+#define PCI_SLVTUNING   0x04008C
+#define PCI_DMATUNING   0x040090
+#define PCI_DMAEADDR    0x040800
+#define PCI_DMAIADDR    0x040804
+#define PCI_DMALEN      0x040808
+#define PCI_DMACTRL     0x04080C
+#define PCI_XIOCTRL     0x040810
+#define PCI_SEL0PROF    0x040814
+#define PCI_SEL1PROF    0x040818
+#define PCI_SEL2PROF    0x04081C
+#define PCI_GPXIOADDR   0x040820
+#define PCI_NANDCTRLS   0x400830
+#define PCI_SEL3PROF    0x040834
+#define PCI_SEL4PROF    0x040838
+#define PCI_GPXIO_STAT  0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR  0x040FB8
+#define PCI_GPXIO_ISET  0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE      (1<<10)
+#define GPPM_ERR       (1<<9)
+#define GPPM_MPAR_ERR  (1<<8)
+#define GPPM_PAR_ERR   (1<<7)
+#define GPPM_R_MABORT  (1<<2)
+#define GPPM_R_TABORT  (1<<1)
+#define PCI_GPPM_IMASK  0x040FC4
+#define PCI_GPPM_ICLR   0x040FC8
+#define PCI_GPPM_ISET   0x040FCC
+#define PCI_DMA_STATUS  0x040FD0
+#define PCI_DMA_IMASK   0x040FD4
+#define PCI_DMA_ICLR    0x040FD8
+#define PCI_DMA_ISET    0x040FDC
+#define PCI_ISTATUS     0x040FE0
+#define PCI_IMASK       0x040FE4
+#define PCI_ICLR        0x040FE8
+#define PCI_ISET        0x040FEC
+#define PCI_MOD_ID      0x040FFC
+
+/*
+ *  PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF           0
+#define PCI_CFG_TYPE0_FUNC_SHF          8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF           0
+#define PCI_CFG_TYPE1_FUNC_SHF          8
+#define PCI_CFG_TYPE1_DEV_SHF           11
+#define PCI_CFG_TYPE1_BUS_SHF           16
+
+/*
+ *  Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER               66
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h
new file mode 100644
index 0000000..ad7608d
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/uart.h
@@ -0,0 +1,30 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE		0xbbe4a000	/* PNX8550 */
+
+#define PNX8550_UART_PORT0	(UART_BASE)
+#define PNX8550_UART_PORT1	(UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x)		(PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x)			(x-PNX8550_INT_GIC_MIN-19)
+
+/* early macros needed for prom/kgdb */
+
+#define ip3106_lcr(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0x000)
+#define ip3106_mcr(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x004)
+#define ip3106_baud(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0x008)
+#define ip3106_cfg(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x00C)
+#define ip3106_fifo(base, port)	 *(volatile u32 *)(base+(port*0x1000) + 0x028)
+#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0)
+#define ip3106_ien(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFE4)
+#define ip3106_iclr(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFE8)
+#define ip3106_iset(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFEC)
+#define ip3106_pd(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0xFF4)
+#define ip3106_mid(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFFC)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h
new file mode 100644
index 0000000..483b7fc
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *  USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE	0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN	        0x1000
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-pnx8550/war.h
new file mode 100644
index 0000000..d0458dd
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H
+#define __ASM_MIPS_MACH_PNX8550_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
new file mode 100644
index 0000000..f3bc7ef
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -0,0 +1,81 @@
+/*
+ *  IDT RC32434 specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The IDT RC32434 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_sb1_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+
+#define cpu_has_vtag_icache		0
+/* #define cpu_has_dc_aliases		? */
+/* #define cpu_has_ic_fills_f_dc	? */
+/* #define cpu_has_pindexed_dcache	? */
+
+/* #define cpu_icache_snoops_remote_store	? */
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+
+/* #define cpu_has_nofpuex		? */
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_64bit_gp_regs		0
+#define cpu_has_64bit_addresses		0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+
+#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h
new file mode 100644
index 0000000..291e2cf
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/ddr.h
@@ -0,0 +1,141 @@
+/*
+ *  Definitions for the DDR registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _ASM_RC32434_DDR_H_
+#define _ASM_RC32434_DDR_H_
+
+#include <asm/mach-rc32434/rb.h>
+
+/* DDR register structure */
+struct ddr_ram {
+	u32 ddrbase;
+	u32 ddrmask;
+	u32 res1;
+	u32 res2;
+	u32 ddrc;
+	u32 ddrabase;
+	u32 ddramask;
+	u32 ddramap;
+	u32 ddrcust;
+	u32 ddrrdc;
+	u32 ddrspare;
+};
+
+#define DDR0_PHYS_ADDR		0x18018000
+
+/* DDR banks masks */
+#define DDR_MASK		0xffff0000
+#define DDR0_BASE_MSK		DDR_MASK
+#define DDR1_BASE_MSK		DDR_MASK
+
+/* DDR bank0 registers */
+#define RC32434_DDR0_ATA_BIT		5
+#define RC32434_DDR0_ATA_MSK		0x000000E0
+#define RC32434_DDR0_DBW_BIT		8
+#define RC32434_DDR0_DBW_MSK		0x00000100
+#define RC32434_DDR0_WR_BIT		9
+#define RC32434_DDR0_WR_MSK		0x00000600
+#define RC32434_DDR0_PS_BIT		11
+#define RC32434_DDR0_PS_MSK		0x00001800
+#define RC32434_DDR0_DTYPE_BIT		13
+#define RC32434_DDR0_DTYPE_MSK		0x0000e000
+#define RC32434_DDR0_RFC_BIT		16
+#define RC32434_DDR0_RFC_MSK		0x000f0000
+#define RC32434_DDR0_RP_BIT		20
+#define RC32434_DDR0_RP_MSK		0x00300000
+#define RC32434_DDR0_AP_BIT		22
+#define RC32434_DDR0_AP_MSK		0x00400000
+#define RC32434_DDR0_RCD_BIT		23
+#define RC32434_DDR0_RCD_MSK		0x01800000
+#define RC32434_DDR0_CL_BIT		25
+#define RC32434_DDR0_CL_MSK		0x06000000
+#define RC32434_DDR0_DBM_BIT		27
+#define RC32434_DDR0_DBM_MSK		0x08000000
+#define RC32434_DDR0_SDS_BIT		28
+#define RC32434_DDR0_SDS_MSK		0x10000000
+#define RC32434_DDR0_ATP_BIT		29
+#define RC32434_DDR0_ATP_MSK		0x60000000
+#define RC32434_DDR0_RE_BIT		31
+#define RC32434_DDR0_RE_MSK		0x80000000
+
+/* DDR bank C registers */
+#define RC32434_DDRC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DDRC_CES_BIT		0
+#define RC32434_DDRC_ACE_BIT		1
+
+/* Custom DDR bank registers */
+#define RC32434_DCST_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DCST_CS_BIT		0
+#define RC32434_DCST_CS_MSK		0x00000003
+#define RC32434_DCST_WE_BIT		2
+#define RC32434_DCST_RAS_BIT		3
+#define RC32434_DCST_CAS_BIT		4
+#define RC32434_DSCT_CKE_BIT		5
+#define RC32434_DSCT_BA_BIT		6
+#define RC32434_DSCT_BA_MSK		0x000000c0
+
+/* DDR QSC registers */
+#define RC32434_QSC_DM_BIT		0
+#define RC32434_QSC_DM_MSK		0x00000003
+#define RC32434_QSC_DQSBS_BIT		2
+#define RC32434_QSC_DQSBS_MSK		0x000000fc
+#define RC32434_QSC_DB_BIT		8
+#define RC32434_QSC_DB_MSK		0x00000100
+#define RC32434_QSC_DBSP_BIT		9
+#define RC32434_QSC_DBSP_MSK		0x01fffe00
+#define RC32434_QSC_BDP_BIT		25
+#define RC32434_QSC_BDP_MSK		0x7e000000
+
+/* DDR LLC registers */
+#define RC32434_LLC_EAO_BIT		0
+#define RC32434_LLC_EAO_MSK		0x00000001
+#define RC32434_LLC_EO_BIT		1
+#define RC32434_LLC_EO_MSK		0x0000003e
+#define RC32434_LLC_FS_BIT		6
+#define RC32434_LLC_FS_MSK		0x000000c0
+#define RC32434_LLC_AS_BIT		8
+#define RC32434_LLC_AS_MSK		0x00000700
+#define RC32434_LLC_SP_BIT		11
+#define RC32434_LLC_SP_MSK		0x001ff800
+
+/* DDR LLFC registers */
+#define RC32434_LLFC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_LLFC_MEN_BIT		0
+#define RC32434_LLFC_EAN_BIT		1
+#define RC32434_LLFC_FF_BIT		2
+
+/* DDR DLLTA registers */
+#define RC32434_DLLTA_ADDR_BIT		2
+#define RC32434_DLLTA_ADDR_MSK		0xfffffffc
+
+/* DDR DLLED registers */
+#define RC32434_DLLED_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DLLED_DBE_BIT		0
+#define RC32434_DLLED_DTE_BIT		1
+
+#endif  /* _ASM_RC32434_DDR_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h
new file mode 100644
index 0000000..5f898b5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef __ASM_RC32434_DMA_H
+#define __ASM_RC32434_DMA_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define DMA0_BASE_ADDR			0x18040000
+
+/*
+ * DMA descriptor (in physical memory).
+ */
+
+struct dma_desc {
+	u32 control;			/* Control. use DMAD_* */
+	u32 ca;				/* Current Address. */
+	u32 devcs;			/* Device control and status. */
+	u32 link;			/* Next descriptor in chain. */
+};
+
+#define DMA_DESC_SIZ			sizeof(struct dma_desc)
+#define DMA_DESC_COUNT_BIT		0
+#define DMA_DESC_COUNT_MSK		0x0003ffff
+#define DMA_DESC_DS_BIT			20
+#define DMA_DESC_DS_MSK			0x00300000
+
+#define DMA_DESC_DEV_CMD_BIT		22
+#define DMA_DESC_DEV_CMD_MSK		0x01c00000
+
+/* DMA command sizes */
+#define DMA_DESC_DEV_CMD_BYTE		0
+#define DMA_DESC_DEV_CMD_HLF_WD		1
+#define DMA_DESC_DEV_CMD_WORD		2
+#define DMA_DESC_DEV_CMD_2WORDS		3
+#define DMA_DESC_DEV_CMD_4WORDS		4
+#define DMA_DESC_DEV_CMD_6WORDS		5
+#define DMA_DESC_DEV_CMD_8WORDS		6
+#define DMA_DESC_DEV_CMD_16WORDS	7
+
+/* DMA descriptors interrupts */
+#define DMA_DESC_COF			(1 << 25) /* Chain on finished */
+#define DMA_DESC_COD			(1 << 26) /* Chain on done */
+#define DMA_DESC_IOF			(1 << 27) /* Interrupt on finished */
+#define DMA_DESC_IOD			(1 << 28) /* Interrupt on done */
+#define DMA_DESC_TERM			(1 << 29) /* Terminated */
+#define DMA_DESC_DONE			(1 << 30) /* Done */
+#define DMA_DESC_FINI			(1 << 31) /* Finished */
+
+/*
+ * DMA register (within Internal Register Map).
+ */
+
+struct dma_reg {
+	u32 dmac;		/* Control. */
+	u32 dmas;		/* Status. */
+	u32 dmasm;		/* Mask. */
+	u32 dmadptr;		/* Descriptor pointer. */
+	u32 dmandptr;		/* Next descriptor pointer. */
+};
+
+/* DMA channels specific registers */
+#define DMA_CHAN_RUN_BIT		(1 << 0)
+#define DMA_CHAN_DONE_BIT		(1 << 1)
+#define DMA_CHAN_MODE_BIT		(1 << 2)
+#define DMA_CHAN_MODE_MSK		0x0000000c
+#define  DMA_CHAN_MODE_AUTO		0
+#define  DMA_CHAN_MODE_BURST		1
+#define  DMA_CHAN_MODE_XFRT		2
+#define  DMA_CHAN_MODE_RSVD		3
+#define DMA_CHAN_ACT_BIT		(1 << 4)
+
+/* DMA status registers */
+#define DMA_STAT_FINI			(1 << 0)
+#define DMA_STAT_DONE			(1 << 1)
+#define DMA_STAT_CHAIN			(1 << 2)
+#define DMA_STAT_ERR			(1 << 3)
+#define DMA_STAT_HALT			(1 << 4)
+
+/*
+ * DMA channel definitions
+ */
+
+#define DMA_CHAN_ETH_RCV		0
+#define DMA_CHAN_ETH_XMT		1
+#define DMA_CHAN_MEM_TO_FIFO		2
+#define DMA_CHAN_FIFO_TO_MEM		3
+#define DMA_CHAN_PCI_TO_MEM		4
+#define DMA_CHAN_MEM_TO_PCI		5
+#define DMA_CHAN_COUNT			6
+
+struct dma_channel {
+	struct dma_reg ch[DMA_CHAN_COUNT];
+};
+
+#endif  /* __ASM_RC32434_DMA_H */
diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h
new file mode 100644
index 0000000..173a9f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma_v.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef _ASM_RC32434_DMA_V_H_
+#define _ASM_RC32434_DMA_V_H_
+
+#include  <asm/mach-rc32434/dma.h>
+#include  <asm/mach-rc32434/rc32434.h>
+
+#define DMA_CHAN_OFFSET		0x14
+#define IS_DMA_USED(X)		(((X) & \
+				(DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \
+				!= 0)
+#define DMA_COUNT(count)	((count) & DMA_DESC_COUNT_MSK)
+
+#define DMA_HALT_TIMEOUT	500
+
+static inline int rc32434_halt_dma(struct dma_reg *ch)
+{
+	int timeout = 1;
+	if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) {
+		__raw_writel(0, &ch->dmac);
+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
+			if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) {
+				__raw_writel(0, &ch->dmas);
+				break;
+			}
+		}
+	}
+
+	return timeout ? 0 : 1;
+}
+
+static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(0, &ch->dmandptr);
+	__raw_writel(dma_addr, &ch->dmadptr);
+}
+
+static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(dma_addr, &ch->dmandptr);
+}
+
+#endif  /* _ASM_RC32434_DMA_V_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h
new file mode 100644
index 0000000..a25cbc5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/eth.h
@@ -0,0 +1,220 @@
+/*
+ *  Definitions for the Ethernet registers
+ *
+ *  Copyright 2002 Allend Stichter <allen.stichter@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef	__ASM_RC32434_ETH_H
+#define	__ASM_RC32434_ETH_H
+
+
+#define ETH0_BASE_ADDR		0x18060000
+
+struct eth_regs {
+	u32 ethintfc;
+	u32 ethfifott;
+	u32 etharc;
+	u32 ethhash0;
+	u32 ethhash1;
+	u32 ethu0[4];		/* Reserved. */
+	u32 ethpfs;
+	u32 ethmcp;
+	u32 eth_u1[10];		/* Reserved. */
+	u32 ethspare;
+	u32 eth_u2[42];		/* Reserved. */
+	u32 ethsal0;
+	u32 ethsah0;
+	u32 ethsal1;
+	u32 ethsah1;
+	u32 ethsal2;
+	u32 ethsah2;
+	u32 ethsal3;
+	u32 ethsah3;
+	u32 ethrbc;
+	u32 ethrpc;
+	u32 ethrupc;
+	u32 ethrfc;
+	u32 ethtbc;
+	u32 ethgpf;
+	u32 eth_u9[50];		/* Reserved. */
+	u32 ethmac1;
+	u32 ethmac2;
+	u32 ethipgt;
+	u32 ethipgr;
+	u32 ethclrt;
+	u32 ethmaxf;
+	u32 eth_u10;		/* Reserved. */
+	u32 ethmtest;
+	u32 miimcfg;
+	u32 miimcmd;
+	u32 miimaddr;
+	u32 miimwtd;
+	u32 miimrdd;
+	u32 miimind;
+	u32 eth_u11;		/* Reserved. */
+	u32 eth_u12;		/* Reserved. */
+	u32 ethcfsa0;
+	u32 ethcfsa1;
+	u32 ethcfsa2;
+};
+
+/* Ethernet interrupt registers */
+#define ETH_INT_FC_EN		(1 << 0)
+#define ETH_INT_FC_ITS		(1 << 1)
+#define ETH_INT_FC_RIP		(1 << 2)
+#define ETH_INT_FC_JAM		(1 << 3)
+#define ETH_INT_FC_OVR		(1 << 4)
+#define ETH_INT_FC_UND		(1 << 5)
+#define ETH_INT_FC_IOC		0x000000c0
+
+/* Ethernet FIFO registers */
+#define ETH_FIFI_TT_TTH_BIT	0
+#define ETH_FIFO_TT_TTH		0x0000007f
+
+/* Ethernet ARC/multicast registers */
+#define ETH_ARC_PRO		(1 << 0)
+#define ETH_ARC_AM		(1 << 1)
+#define ETH_ARC_AFM		(1 << 2)
+#define ETH_ARC_AB		(1 << 3)
+
+/* Ethernet SAL registers */
+#define ETH_SAL_BYTE_5		0x000000ff
+#define ETH_SAL_BYTE_4		0x0000ff00
+#define ETH_SAL_BYTE_3		0x00ff0000
+#define ETH_SAL_BYTE_2		0xff000000
+
+/* Ethernet SAH registers */
+#define ETH_SAH_BYTE1		0x000000ff
+#define ETH_SAH_BYTE0		0x0000ff00
+
+/* Ethernet GPF register */
+#define ETH_GPF_PTV		0x0000ffff
+
+/* Ethernet PFG register */
+#define ETH_PFS_PFD		(1 << 0)
+
+/* Ethernet CFSA[0-3] registers */
+#define ETH_CFSA0_CFSA4		0x000000ff
+#define ETH_CFSA0_CFSA5		0x0000ff00
+#define ETH_CFSA1_CFSA2		0x000000ff
+#define ETH_CFSA1_CFSA3		0x0000ff00
+#define ETH_CFSA1_CFSA0		0x000000ff
+#define ETH_CFSA1_CFSA1		0x0000ff00
+
+/* Ethernet MAC1 registers */
+#define ETH_MAC1_RE		(1 << 0)
+#define ETH_MAC1_PAF		(1 << 1)
+#define ETH_MAC1_RFC		(1 << 2)
+#define ETH_MAC1_TFC		(1 << 3)
+#define ETH_MAC1_LB		(1 << 4)
+#define ETH_MAC1_MR		(1 << 31)
+
+/* Ethernet MAC2 registers */
+#define ETH_MAC2_FD		(1 << 0)
+#define ETH_MAC2_FLC		(1 << 1)
+#define ETH_MAC2_HFE		(1 << 2)
+#define ETH_MAC2_DC		(1 << 3)
+#define ETH_MAC2_CEN		(1 << 4)
+#define ETH_MAC2_PE		(1 << 5)
+#define ETH_MAC2_VPE		(1 << 6)
+#define ETH_MAC2_APE		(1 << 7)
+#define ETH_MAC2_PPE		(1 << 8)
+#define ETH_MAC2_LPE		(1 << 9)
+#define ETH_MAC2_NB		(1 << 12)
+#define ETH_MAC2_BP		(1 << 13)
+#define ETH_MAC2_ED		(1 << 14)
+
+/* Ethernet IPGT register */
+#define ETH_IPGT		0x0000007f
+
+/* Ethernet IPGR registers */
+#define ETH_IPGR_IPGR2		0x0000007f
+#define ETH_IPGR_IPGR1		0x00007f00
+
+/* Ethernet CLRT registers */
+#define ETH_CLRT_MAX_RET	0x0000000f
+#define ETH_CLRT_COL_WIN	0x00003f00
+
+/* Ethernet MAXF register */
+#define ETH_MAXF		0x0000ffff
+
+/* Ethernet test registers */
+#define ETH_TEST_REG		(1 << 2)
+#define ETH_MCP_DIV		0x000000ff
+
+/* MII registers */
+#define ETH_MII_CFG_RSVD	0x0000000c
+#define ETH_MII_CMD_RD		(1 << 0)
+#define ETH_MII_CMD_SCN		(1 << 1)
+#define ETH_MII_REG_ADDR	0x0000001f
+#define ETH_MII_PHY_ADDR	0x00001f00
+#define ETH_MII_WTD_DATA	0x0000ffff
+#define ETH_MII_RDD_DATA	0x0000ffff
+#define ETH_MII_IND_BSY		(1 << 0)
+#define ETH_MII_IND_SCN		(1 << 1)
+#define ETH_MII_IND_NV		(1 << 2)
+
+/*
+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
+ */
+
+#define ETH_RX_FD		(1 << 0)
+#define ETH_RX_LD		(1 << 1)
+#define ETH_RX_ROK		(1 << 2)
+#define ETH_RX_FM		(1 << 3)
+#define ETH_RX_MP		(1 << 4)
+#define ETH_RX_BP		(1 << 5)
+#define ETH_RX_VLT		(1 << 6)
+#define ETH_RX_CF		(1 << 7)
+#define ETH_RX_OVR		(1 << 8)
+#define ETH_RX_CRC		(1 << 9)
+#define ETH_RX_CV		(1 << 10)
+#define ETH_RX_DB		(1 << 11)
+#define ETH_RX_LE		(1 << 12)
+#define ETH_RX_LOR		(1 << 13)
+#define ETH_RX_CES		(1 << 14)
+#define ETH_RX_LEN_BIT		16
+#define ETH_RX_LEN		0xffff0000
+
+#define ETH_TX_FD		(1 << 0)
+#define ETH_TX_LD		(1 << 1)
+#define ETH_TX_OEN		(1 << 2)
+#define ETH_TX_PEN		(1 << 3)
+#define ETH_TX_CEN		(1 << 4)
+#define ETH_TX_HEN		(1 << 5)
+#define ETH_TX_TOK		(1 << 6)
+#define ETH_TX_MP		(1 << 7)
+#define ETH_TX_BP		(1 << 8)
+#define ETH_TX_UND		(1 << 9)
+#define ETH_TX_OF		(1 << 10)
+#define ETH_TX_ED		(1 << 11)
+#define ETH_TX_EC		(1 << 12)
+#define ETH_TX_LC		(1 << 13)
+#define ETH_TX_TD		(1 << 14)
+#define ETH_TX_CRC		(1 << 15)
+#define ETH_TX_LE		(1 << 16)
+#define ETH_TX_CC		0x001E0000
+
+#endif  /* __ASM_RC32434_ETH_H */
diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h
new file mode 100644
index 0000000..3a70b41
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/gpio.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *	All rights reserved.
+ *
+ * GPIO register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#ifndef _RC32434_GPIO_H_
+#define _RC32434_GPIO_H_
+
+#include <linux/types.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+#include <asm-generic/gpio.h>
+
+struct rb532_gpio_reg {
+	u32   gpiofunc;   /* GPIO Function Register
+			   * gpiofunc[x]==0 bit = gpio
+			   * func[x]==1  bit = altfunc
+			   */
+	u32   gpiocfg;	  /* GPIO Configuration Register
+			   * gpiocfg[x]==0 bit = input
+			   * gpiocfg[x]==1 bit = output
+			   */
+	u32   gpiod;	  /* GPIO Data Register
+			   * gpiod[x] read/write gpio pinX status
+			   */
+	u32   gpioilevel; /* GPIO Interrupt Status Register
+			   * interrupt level (see gpioistat)
+			   */
+	u32   gpioistat;  /* Gpio Interrupt Status Register
+			   * istat[x] = (gpiod[x] == level[x])
+			   * cleared in ISR (STICKY bits)
+			   */
+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
+};
+
+/* UART GPIO signals */
+#define RC32434_UART0_SOUT	(1 << 0)
+#define RC32434_UART0_SIN	(1 << 1)
+#define RC32434_UART0_RTS	(1 << 2)
+#define RC32434_UART0_CTS	(1 << 3)
+
+/* M & P bus GPIO signals */
+#define RC32434_MP_BIT_22	(1 << 4)
+#define RC32434_MP_BIT_23	(1 << 5)
+#define RC32434_MP_BIT_24	(1 << 6)
+#define RC32434_MP_BIT_25	(1 << 7)
+
+/* CPU GPIO signals */
+#define RC32434_CPU_GPIO	(1 << 8)
+
+/* Reserved GPIO signals */
+#define RC32434_AF_SPARE_6	(1 << 9)
+#define RC32434_AF_SPARE_4	(1 << 10)
+#define RC32434_AF_SPARE_3	(1 << 11)
+#define RC32434_AF_SPARE_2	(1 << 12)
+
+/* PCI messaging unit */
+#define RC32434_PCI_MSU_GPIO	(1 << 13)
+
+/* NAND GPIO signals */
+#define GPIO_RDY		8
+#define GPIO_WPX	9
+#define GPIO_ALE		10
+#define GPIO_CLE		11
+
+/* Compact Flash GPIO pin */
+#define CF_GPIO_NUM		13
+
+extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
+extern unsigned get_434_reg(unsigned reg_offs);
+extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+extern unsigned char get_latch_u5(void);
+
+#endif /* _RC32434_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/integ.h b/arch/mips/include/asm/mach-rc32434/integ.h
new file mode 100644
index 0000000..fa65bc3
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/integ.h
@@ -0,0 +1,59 @@
+/*
+ *  Definitions for the Watchdog registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __RC32434_INTEG_H__
+#define __RC32434_INTEG_H__
+
+#include <asm/mach-rc32434/rb.h>
+
+#define INTEG0_BASE_ADDR	0x18030030
+
+struct integ {
+	u32 errcs;			/* sticky use ERRCS_ */
+	u32 wtcount;			/* Watchdog timer count reg. */
+	u32 wtcompare;			/* Watchdog timer timeout value. */
+	u32 wtc;			/* Watchdog timer control. use WTC_ */
+};
+
+/* Error counters */
+#define RC32434_ERR_WTO		0
+#define RC32434_ERR_WNE		1
+#define RC32434_ERR_UCW		2
+#define RC32434_ERR_UCR		3
+#define RC32434_ERR_UPW		4
+#define RC32434_ERR_UPR		5
+#define RC32434_ERR_UDW		6
+#define RC32434_ERR_UDR		7
+#define RC32434_ERR_SAE		8
+#define RC32434_ERR_WRE		9
+
+/* Watchdog control bits */
+#define RC32434_WTC_EN		0
+#define RC32434_WTC_TO		1
+
+#endif	/* __RC32434_INTEG_H__ */
diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h
new file mode 100644
index 0000000..56738d8
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/irq.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_RC32434_IRQ_H
+#define __ASM_RC32434_IRQ_H
+
+#define NR_IRQS	256
+
+#include <asm/mach-generic/irq.h>
+#include <asm/mach-rc32434/rb.h>
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND		(REGBASE + 0x38000)
+#define IC_GROUP0_MASK		(REGBASE + 0x38008)
+#define IC_GROUP_OFFSET		0x0C
+
+#define NUM_INTR_GROUPS		5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
+					/* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
+					/* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
+					/* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
+
+#define UART0_IRQ		(GROUP3_IRQ_BASE + 0)
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#endif  /* __ASM_RC32434_IRQ_H */
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
new file mode 100644
index 0000000..410638f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -0,0 +1,481 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * Initial Release
+ */
+
+#ifndef _ASM_RC32434_PCI_H_
+#define _ASM_RC32434_PCI_H_
+
+#define epld_mask ((volatile unsigned char *)0xB900000d)
+
+#define PCI0_BASE_ADDR		0x18080000
+#define PCI_LBA_COUNT		4
+
+struct pci_map {
+	u32 address;		/* Address. */
+	u32 control;		/* Control. */
+	u32 mapping;		/* mapping. */
+};
+
+struct pci_reg {
+	u32 pcic;
+	u32 pcis;
+	u32 pcism;
+	u32 pcicfga;
+	u32 pcicfgd;
+	volatile struct pci_map pcilba[PCI_LBA_COUNT];
+	u32 pcidac;
+	u32 pcidas;
+	u32 pcidasm;
+	u32 pcidad;
+	u32 pcidma8c;
+	u32 pcidma9c;
+	u32 pcitc;
+};
+
+#define PCI_MSU_COUNT		2
+
+struct pci_msu {
+	u32 pciim[PCI_MSU_COUNT];
+	u32 pciom[PCI_MSU_COUNT];
+	u32 pciid;
+	u32 pciiic;
+	u32 pciiim;
+	u32 pciiod;
+	u32 pciioic;
+	u32 pciioim;
+};
+
+/*
+ * PCI Control Register
+ */
+
+#define PCI_CTL_EN		(1 << 0)
+#define PCI_CTL_TNR		(1 << 1)
+#define PCI_CTL_SCE		(1 << 2)
+#define PCI_CTL_IEN		(1 << 3)
+#define PCI_CTL_AAA		(1 << 4)
+#define PCI_CTL_EAP		(1 << 5)
+#define PCI_CTL_PCIM_BIT	6
+#define PCI_CTL_PCIM		0x000001c0
+
+#define PCI_CTL_PCIM_DIS	0
+#define PCI_CTL_PCIM_TNR	1 /* Satellite - target not ready */
+#define PCI_CTL_PCIM_SUS	2 /* Satellite - suspended CPU. */
+#define PCI_CTL_PCIM_EXT	3 /* Host - external arbiter. */
+#define PCI_CTL PCIM_PRIO	4 /* Host - fixed priority arb. */
+#define PCI_CTL_PCIM_RR		5 /* Host - round robin priority. */
+#define PCI_CTL_PCIM_RSVD6	6
+#define PCI_CTL_PCIM_RSVD7	7
+
+#define PCI_CTL_IGM		(1 << 9)
+
+/*
+ * PCI Status Register
+ */
+
+#define PCI_STAT_EED		(1 << 0)
+#define PCI_STAT_WR		(1 << 1)
+#define PCI_STAT_NMI		(1 << 2)
+#define PCI_STAT_II		(1 << 3)
+#define PCI_STAT_CWE		(1 << 4)
+#define PCI_STAT_CRE		(1 << 5)
+#define PCI_STAT_MDPE		(1 << 6)
+#define PCI_STAT_STA		(1 << 7)
+#define PCI_STAT_RTA		(1 << 8)
+#define PCI_STAT_RMA		(1 << 9)
+#define PCI_STAT_SSE		(1 << 10)
+#define PCI_STAT_OSE		(1 << 11)
+#define PCI_STAT_PE		(1 << 12)
+#define PCI_STAT_TAE		(1 << 13)
+#define PCI_STAT_RLE		(1 << 14)
+#define PCI_STAT_BME		(1 << 15)
+#define PCI_STAT_PRD		(1 << 16)
+#define PCI_STAT_RIP		(1 << 17)
+
+/*
+ * PCI Status Mask Register
+ */
+
+#define PCI_STATM_EED		PCI_STAT_EED
+#define PCI_STATM_WR		PCI_STAT_WR
+#define PCI_STATM_NMI		PCI_STAT_NMI
+#define PCI_STATM_II		PCI_STAT_II
+#define PCI_STATM_CWE		PCI_STAT_CWE
+#define PCI_STATM_CRE		PCI_STAT_CRE
+#define PCI_STATM_MDPE		PCI_STAT_MDPE
+#define PCI_STATM_STA		PCI_STAT_STA
+#define PCI_STATM_RTA		PCI_STAT_RTA
+#define PCI_STATM_RMA		PCI_STAT_RMA
+#define PCI_STATM_SSE		PCI_STAT_SSE
+#define PCI_STATM_OSE		PCI_STAT_OSE
+#define PCI_STATM_PE		PCI_STAT_PE
+#define PCI_STATM_TAE		PCI_STAT_TAE
+#define PCI_STATM_RLE		PCI_STAT_RLE
+#define PCI_STATM_BME		PCI_STAT_BME
+#define PCI_STATM_PRD		PCI_STAT_PRD
+#define PCI_STATM_RIP		PCI_STAT_RIP
+
+/*
+ * PCI Configuration Address Register
+ */
+#define PCI_CFGA_REG_BIT	2
+#define PCI_CFGA_REG		0x000000fc
+#define	 PCI_CFGA_REG_ID	(0x00 >> 2)	/* use PCFGID */
+#define	 PCI_CFGA_REG_04	(0x04 >> 2)	/* use PCFG04_ */
+#define	 PCI_CFGA_REG_08	(0x08 >> 2)	/* use PCFG08_ */
+#define	 PCI_CFGA_REG_0C	(0x0C >> 2)	/* use PCFG0C_ */
+#define	 PCI_CFGA_REG_PBA0	(0x10 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA1	(0x14 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA2	(0x18 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA3	(0x1c >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_SUBSYS	(0x2c >> 2)	/* use PCFGSS_ */
+#define  PCI_CFGA_REG_3C	(0x3C >> 2)	/* use PCFG3C_ */
+#define	 PCI_CFGA_REG_PBBA0C	(0x44 >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA0M	(0x48 >> 2)
+#define	 PCI_CFGA_REG_PBA1C	(0x4c >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA1M	(0x50 >> 2)
+#define	 PCI_CFGA_REG_PBA2C	(0x54 >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA2M	(0x58 >> 2)
+#define	 PCI_CFGA_REG_PBA3C	(0x5c >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA3M	(0x60 >> 2)
+#define	 PCI_CFGA_REG_PMGT	(0x64 >> 2)
+#define PCI_CFGA_FUNC_BIT	8
+#define PCI_CFGA_FUNC		0x00000700
+#define PCI_CFGA_DEV_BIT	11
+#define	PCI_CFGA_DEV		0x0000f800
+#define	PCI_CFGA_DEV_INTERN	0
+#define	PCI_CFGA_BUS_BIT	16
+#define PCI CFGA_BUS		0x00ff0000
+#define PCI_CFGA_BUS_TYPE0	0
+#define PCI_CFGA_EN		(1 << 31)
+
+/* PCI CFG04 commands */
+#define PCI_CFG04_CMD_IO_ENA	(1 << 0)
+#define PCI_CFG04_CMD_MEM_ENA	(1 << 1)
+#define PCI_CFG04_CMD_BM_ENA	(1 << 2)
+#define PCI_CFG04_CMD_MW_INV	(1 << 4)
+#define PCI_CFG04_CMD_PAR_ENA	(1 << 6)
+#define PCI_CFG04_CMD_SER_ENA	(1 << 8)
+#define PCI_CFG04_CMD_FAST_ENA	(1 << 9)
+
+/* PCI CFG04 status fields */
+#define PCI_CFG04_STAT_BIT	16
+#define PCI_CFG04_STAT		0xffff0000
+#define PCI_CFG04_STAT_66_MHZ	(1 << 21)
+#define PCI_CFG04_STAT_FBB	(1 << 23)
+#define PCI_CFG04_STAT_MDPE	(1 << 24)
+#define PCI_CFG04_STAT_DST	(1 << 25)
+#define PCI_CFG04_STAT_STA	(1 << 27)
+#define PCI_CFG04_STAT_RTA	(1 << 28)
+#define PCI_CFG04_STAT_RMA	(1 << 29)
+#define PCI_CFG04_STAT_SSE	(1 << 30)
+#define PCI_CFG04_STAT_PE	(1 << 31)
+
+#define PCI_PBA_MSI		(1 << 0)
+#define PCI_PBA_P		(1 << 2)
+
+/* PCI PBAC registers */
+#define PCI_PBAC_MSI		(1 << 0)
+#define PCI_PBAC_P		(1 << 1)
+#define PCI_PBAC_SIZE_BIT	2
+#define PCI_PBAC_SIZE		0x0000007c
+#define	PCI_PBAC_SB		(1 << 7)
+#define	PCI_PBAC_PP		(1 << 8)
+#define PCI_PBAC_MR_BIT		9
+#define PCI_PBAC_MR		0x00000600
+#define	 PCI_PBAC_MR_RD		0
+#define	 PCI_PBAC_MR_RD_LINE	1
+#define  PCI_PBAC_MR_RD_MULT	2
+#define PCI_PBAC_MRL		(1 << 11)
+#define PCI_PBAC_MRM		(1 << 12)
+#define PCI_PBAC_TRP		(1 << 13)
+
+#define PCI_CFG40_TRDY_TIM	0x000000ff
+#define PCI_CFG40_RET_LIM	0x0000ff00
+
+/*
+ * PCI Local Base Address [0|1|2|3] Register
+ */
+
+#define PCI_LBA_BADDR_BIT	0
+#define PCI_LBA_BADDR		0xffffff00
+
+/*
+ * PCI Local Base Address Control Register
+ */
+
+#define PCI_LBAC_MSI		(1 << 0)
+#define  PCI_LBAC_MSI_MEM	0
+#define  PCI_LBAC_MSI_IO	1
+#define PCI_LBAC_SIZE_BIT	2
+#define PCI_LBAC_SIZE		0x0000007c
+#define PCI_LBAC_SB		(1 << 7)
+#define PCI_LBAC_RT		(1 << 8)
+#define  PCI_LBAC_RT_NO_PREF	0
+#define  PCI_LBAC_RT_PREF	1
+
+/*
+ * PCI Local Base Address [0|1|2|3] Mapping Register
+ */
+#define PCI_LBAM_MADDR_BIT	8
+#define PCI_LBAM_MADDR		0xffffff00
+
+/*
+ * PCI Decoupled Access Control Register
+ */
+#define PCI_DAC_DEN		(1 << 0)
+
+/*
+ * PCI Decoupled Access Status Register
+ */
+#define PCI_DAS_D		(1 << 0)
+#define PCI_DAS_B		(1 << 1)
+#define PCI_DAS_E		(1 << 2)
+#define PCI_DAS_OFE		(1 << 3)
+#define PCI_DAS_OFF		(1 << 4)
+#define PCI_DAS_IFE		(1 << 5)
+#define PCI_DAS_IFF		(1 << 6)
+
+/*
+ * PCI DMA Channel 8 Configuration Register
+ */
+#define PCI_DMA8C_MBS_BIT	0
+#define PCI_DMA8C_MBS		0x00000fff /* Maximum Burst Size. */
+#define PCI_DMA8C_OUR		(1 << 12)
+
+/*
+ * PCI DMA Channel 9 Configuration Register
+ */
+#define PCI_DMA9C_MBS_BIT	0	/* Maximum Burst Size. */
+#define PCI_DMA9C_MBS		0x00000fff
+
+/*
+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
+ */
+
+#define PCI_DMAD_PT_BIT		22		/* in DEVCMD field (descriptor) */
+#define PCI_DMAD_PT		0x00c00000	/* preferred transaction field */
+/* These are for reads (DMA channel 8) */
+#define PCI_DMAD_DEVCMD_MR	0		/* memory read */
+#define	PCI_DMAD_DEVCMD_MRL	1		/* memory read line */
+#define	PCI_DMAD_DEVCMD_MRM	2		/* memory read multiple */
+#define	PCI_DMAD_DEVCMD_IOR	3		/* I/O read */
+/* These are for writes (DMA channel 9) */
+#define PCI_DMAD_DEVCMD_MW	0		/* memory write */
+#define	PCI_DMAD_DEVCMD_MWI	1		/* memory write invalidate */
+#define	PCI_DMAD_DEVCMD_IOW	3		/* I/O write */
+
+/* Swap byte field applies to both DMA channel 8 and 9 */
+#define	PCI_DMAD_SB		(1 << 24)	/* swap byte field */
+
+
+/*
+ * PCI Target Control Register
+ */
+
+#define PCI_TC_RTIMER_BIT	0
+#define PCI_TC_RTIMER		0x000000ff
+#define PCI_TC_DTIMER_BIT	8
+#define PCI_TC_DTIMER		0x0000ff00
+#define PCI_TC_RDR		(1 << 18)
+#define PCI_TC_DDT		(1 << 19)
+
+/*
+ * PCI messaging unit [applies to both inbound and outbound registers ]
+ */
+#define PCI_MSU_M0		(1 << 0)
+#define PCI_MSU_M1		(1 << 1)
+#define PCI_MSU_DB		(1 << 2)
+
+#define PCI_MSG_ADDR	     	0xB8088010
+#define PCI0_ADDR		0xB8080000
+#define rc32434_pci ((struct pci_reg *) PCI0_ADDR)
+#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR)
+
+#define PCIM_SHFT		0x6
+#define PCIM_BIT_LEN		0x7
+#define PCIM_H_EA		0x3
+#define PCIM_H_IA_FIX		0x4
+#define PCIM_H_IA_RR		0x5
+#if 0
+#define PCI_ADDR_START		0x13000000
+#endif
+
+#define PCI_ADDR_START		0x50000000
+
+#define CPUTOPCI_MEM_WIN	0x02000000
+#define CPUTOPCI_IO_WIN		0x00100000
+#define PCILBA_SIZE_SHFT	2
+#define PCILBA_SIZE_MASK	0x1F
+#define SIZE_256MB		0x1C
+#define SIZE_128MB		0x1B
+#define SIZE_64MB               0x1A
+#define SIZE_32MB		0x19
+#define SIZE_16MB               0x18
+#define SIZE_4MB		0x16
+#define SIZE_2MB		0x15
+#define SIZE_1MB		0x14
+#define KORINA_CONFIG0_ADDR	0x80000000
+#define KORINA_CONFIG1_ADDR	0x80000004
+#define KORINA_CONFIG2_ADDR	0x80000008
+#define KORINA_CONFIG3_ADDR	0x8000000C
+#define KORINA_CONFIG4_ADDR	0x80000010
+#define KORINA_CONFIG5_ADDR	0x80000014
+#define KORINA_CONFIG6_ADDR	0x80000018
+#define KORINA_CONFIG7_ADDR	0x8000001C
+#define KORINA_CONFIG8_ADDR	0x80000020
+#define KORINA_CONFIG9_ADDR	0x80000024
+#define KORINA_CONFIG10_ADDR	0x80000028
+#define KORINA_CONFIG11_ADDR	0x8000002C
+#define KORINA_CONFIG12_ADDR	0x80000030
+#define KORINA_CONFIG13_ADDR	0x80000034
+#define KORINA_CONFIG14_ADDR	0x80000038
+#define KORINA_CONFIG15_ADDR	0x8000003C
+#define KORINA_CONFIG16_ADDR	0x80000040
+#define KORINA_CONFIG17_ADDR	0x80000044
+#define KORINA_CONFIG18_ADDR	0x80000048
+#define KORINA_CONFIG19_ADDR	0x8000004C
+#define KORINA_CONFIG20_ADDR	0x80000050
+#define KORINA_CONFIG21_ADDR	0x80000054
+#define KORINA_CONFIG22_ADDR	0x80000058
+#define KORINA_CONFIG23_ADDR	0x8000005C
+#define KORINA_CONFIG24_ADDR	0x80000060
+#define KORINA_CONFIG25_ADDR	0x80000064
+#define KORINA_CMD 		(PCI_CFG04_CMD_IO_ENA | \
+				 PCI_CFG04_CMD_MEM_ENA | \
+				 PCI_CFG04_CMD_BM_ENA | \
+				 PCI_CFG04_CMD_MW_INV | \
+				 PCI_CFG04_CMD_PAR_ENA | \
+				 PCI_CFG04_CMD_SER_ENA)
+
+#define KORINA_STAT		(PCI_CFG04_STAT_MDPE | \
+				 PCI_CFG04_STAT_STA | \
+				 PCI_CFG04_STAT_RTA | \
+				 PCI_CFG04_STAT_RMA | \
+				 PCI_CFG04_STAT_SSE | \
+				 PCI_CFG04_STAT_PE)
+
+#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+
+#define KORINA_REVID		0
+#define KORINA_CLASS_CODE	0
+#define KORINA_CNFG2		((KORINA_CLASS_CODE<<8) | \
+				  KORINA_REVID)
+
+#define KORINA_CACHE_LINE_SIZE	4
+#define KORINA_MASTER_LAT	0x3c
+#define KORINA_HEADER_TYPE	0
+#define KORINA_BIST		0
+
+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
+		      (KORINA_HEADER_TYPE<<16) | \
+		      (KORINA_MASTER_LAT<<8) | \
+		      KORINA_CACHE_LINE_SIZE)
+
+#define KORINA_BAR0	0x00000008	/* 128 MB Memory */
+#define KORINA_BAR1	0x18800001	/* 1 MB IO */
+#define KORINA_BAR2	0x18000001	/* 2 MB IO window for Korina
+					   internal Registers */
+#define KORINA_BAR3	0x48000008	/* Spare 128 MB Memory */
+
+#define KORINA_CNFG4	KORINA_BAR0
+#define KORINA_CNFG5    KORINA_BAR1
+#define KORINA_CNFG6 	KORINA_BAR2
+#define KORINA_CNFG7	KORINA_BAR3
+
+#define KORINA_SUBSYS_VENDOR_ID 0x011d
+#define KORINA_SUBSYSTEM_ID	0x0214
+#define KORINA_CNFG8		0
+#define KORINA_CNFG9		0
+#define KORINA_CNFG10		0
+#define KORINA_CNFG11 	((KORINA_SUBSYS_VENDOR_ID<<16) | \
+			  KORINA_SUBSYSTEM_ID)
+#define KORINA_INT_LINE		1
+#define KORINA_INT_PIN		1
+#define KORINA_MIN_GNT		8
+#define KORINA_MAX_LAT		0x38
+#define KORINA_CNFG12		0
+#define KORINA_CNFG13 		0
+#define KORINA_CNFG14		0
+#define KORINA_CNFG15	((KORINA_MAX_LAT<<24) | \
+			 (KORINA_MIN_GNT<<16) | \
+			 (KORINA_INT_PIN<<8)  | \
+			  KORINA_INT_LINE)
+#define	KORINA_RETRY_LIMIT	0x80
+#define KORINA_TRDY_LIMIT	0x80
+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
+			KORINA_TRDY_LIMIT)
+#define PCI_PBAxC_R		0x0
+#define PCI_PBAxC_RL		0x1
+#define PCI_PBAxC_RM		0x2
+#define SIZE_SHFT		2
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA0C	(PCI_PBAC_MRL | PCI_PBAC_SB | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#else
+#define KORINA_PBA0C	(PCI_PBAC_MRL | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#endif
+#define KORINA_CNFG17	KORINA_PBA0C
+#define KORINA_PBA0M	0x0
+#define KORINA_CNFG18	KORINA_PBA0M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG19	KORINA_PBA1C
+#define KORINA_PBA1M	0x0
+#define KORINA_CNFG20	KORINA_PBA1M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG21	KORINA_PBA2C
+#define KORINA_PBA2M	0x18000000
+#define KORINA_CNFG22	KORINA_PBA2M
+#define KORINA_PBA3C	0
+#define KORINA_CNFG23	KORINA_PBA3C
+#define KORINA_PBA3M	0
+#define KORINA_CNFG24	KORINA_PBA3M
+
+#define	PCITC_DTIMER_VAL	8
+#define PCITC_RTIMER_VAL	0x10
+
+#endif  /* __ASM_RC32434_PCI_H */
diff --git a/arch/mips/include/asm/mach-rc32434/prom.h b/arch/mips/include/asm/mach-rc32434/prom.h
new file mode 100644
index 0000000..660707f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/prom.h
@@ -0,0 +1,40 @@
+/*
+ *  Definitions for the PROM
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define PROM_ENTRY(x)		(0xbfc00000 + ((x) * 8))
+
+#define SR_NMI			0x00180000
+#define SERIAL_SPEED_ENTRY	0x00000001
+
+#define FREQ_TAG		"HZ="
+#define KMAC_TAG		"kmac="
+#define MEM_TAG			"mem="
+#define BOARD_TAG		"board="
+
+#define BOARD_RB532		"500"
+#define BOARD_RB532A		"500r5"
diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
new file mode 100644
index 0000000..79e8ef6
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -0,0 +1,84 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  Copyright (C) 2004 IDT Inc.
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_RC32434_RB_H
+#define __ASM_RC32434_RB_H
+
+#include <linux/genhd.h>
+
+#define REGBASE		0x18000000
+#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
+#define UART0BASE	0x58000
+#define RST		(1 << 15)
+#define DEV0BASE	0x010000
+#define DEV0MASK	0x010004
+#define DEV0C		0x010008
+#define DEV0T		0x01000C
+#define DEV1BASE	0x010010
+#define DEV1MASK	0x010014
+#define DEV1C		0x010018
+#define DEV1TC		0x01001C
+#define DEV2BASE	0x010020
+#define DEV2MASK	0x010024
+#define DEV2C		0x010028
+#define DEV2TC		0x01002C
+#define DEV3BASE	0x010030
+#define DEV3MASK	0x010034
+#define DEV3C		0x010038
+#define DEV3TC		0x01003C
+#define BTCS		0x010040
+#define BTCOMPARE	0x010044
+#define GPIOBASE	0x050000
+#define GPIOCFG		0x050004
+#define GPIOD		0x050008
+#define GPIOILEVEL	0x05000C
+#define GPIOISTAT	0x050010
+#define GPIONMIEN	0x050014
+#define IMASK6		0x038038
+#define LO_WPX		(1 << 0)
+#define LO_ALE		(1 << 1)
+#define LO_CLE		(1 << 2)
+#define LO_CEX		(1 << 3)
+#define LO_FOFF		(1 << 5)
+#define LO_SPICS	(1 << 6)
+#define LO_ULED		(1 << 7)
+
+#define BIT_TO_MASK(x)	(1 << x)
+
+struct dev_reg {
+	u32	base;
+	u32	mask;
+	u32	ctl;
+	u32	timing;
+};
+
+struct korina_device {
+	char *name;
+	unsigned char mac[6];
+	struct net_device *dev;
+};
+
+struct cf_device {
+	int gpio_pin;
+	void *dev;
+	struct gendisk *gd;
+};
+
+struct mpmc_device {
+	unsigned char	state;
+	spinlock_t	lock;
+	void __iomem 	*base;
+};
+
+#endif  /* __ASM_RC32434_RB_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h
new file mode 100644
index 0000000..fce25d4
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rc32434.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for IDT RC323434 CPU.
+ */
+
+#ifndef _ASM_RC32434_RC32434_H_
+#define _ASM_RC32434_RC32434_H_
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define IDT_CLOCK_MULT		2
+
+/* cpu pipeline flush */
+static inline void rc32434_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+#endif  /* _ASM_RC32434_RC32434_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h
new file mode 100644
index 0000000..e49b1d5
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/timer.h
@@ -0,0 +1,65 @@
+/*
+ *  Definitions for timer registers
+ *
+ *  Copyright 2004 Philip Rischel <rischelp@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_RC32434_TIMER_H
+#define __ASM_RC32434_TIMER_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define TIMER0_BASE_ADDR		0x18028000
+#define TIMER_COUNT			3
+
+struct timer_counter {
+	u32 count;
+	u32 compare;
+	u32 ctc;		/*use CTC_ */
+};
+
+struct timer {
+	struct timer_counter tim[TIMER_COUNT];
+	u32 rcount;	/* use RCOUNT_ */
+	u32 rcompare;	/* use RCOMPARE_ */
+	u32 rtc;	/* use RTC_ */
+};
+
+#define RC32434_CTC_EN_BIT		0
+#define RC32434_CTC_TO_BIT		1
+
+/* Real time clock registers */
+#define RC32434_RTC_MSK(x)              BIT_TO_MASK(x)
+#define RC32434_RTC_CE_BIT              0
+#define RC32434_RTC_TO_BIT              1
+#define RC32434_RTC_RQE_BIT             2
+
+/* Counter registers */
+#define RC32434_RCOUNT_BIT              0
+#define RC32434_RCOUNT_MSK              0x0000ffff
+#define RC32434_RCOMP_BIT               0
+#define RC32434_RCOMP_MSK               0x0000ffff
+
+#endif  /* __ASM_RC32434_TIMER_H */
diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h
new file mode 100644
index 0000000..3ddf187
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
new file mode 100644
index 0000000..ccf5433
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors.
+ */
+#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+
+#include <cpu-feature-overrides.h>
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		1
+#define cpu_has_32fpr		1
+#define cpu_has_counter		1
+#define cpu_has_watch		0
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_cache_cdex_p	1
+#define cpu_has_prefetch	0
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h
new file mode 100644
index 0000000..145bce0
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/mc146818rtc.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip with ARC epoch.
+ */
+#ifndef __ASM_MACH_RM_MC146818RTC_H
+#define __ASM_MACH_RM_MC146818RTC_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#else
+#define mc146818_decode_year(year) ((year) + 1980)
+#endif
+
+#include_next <mc146818rtc.h>
+
+#endif /* __ASM_MACH_RM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h
new file mode 100644
index 0000000..948d312
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_RM_WAR_H
+#define __ASM_MIPS_MACH_RM_WAR_H
+
+/*
+ * The RM200C seems to have been shipped only with V2.0 R4600s
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	1
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_RM_WAR_H */
diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
new file mode 100644
index 0000000..1c1f924
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Sibyte are MIPS64 processors wired to a specific configuration
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		1
+#define cpu_has_ejtag		1
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	1
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	1
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
new file mode 100644
index 0000000..7950ef4
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H
+#define __ASM_MIPS_MACH_SIBYTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+
+#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
+    defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+
+#define BCM1250_M3_WAR	1
+#define SIBYTE_1956_WAR	1
+
+#else
+
+#define BCM1250_M3_WAR	0
+#define SIBYTE_1956_WAR	0
+
+#endif
+
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
new file mode 100644
index 0000000..93c6c04
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -0,0 +1,38 @@
+/*
+ *	include/asm-mips/mach-tx39xx/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX39XX_IOREMAP_H
+#define __ASM_MACH_TX39XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0xff0000)
+		return (void __iomem *)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= TXX9_DIRECTMAP_BASE;
+}
+
+#endif /* __ASM_MACH_TX39XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/mangle-port.h b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
new file mode 100644
index 0000000..ef0b502
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H
+#define __ASM_MACH_TX39XX_MANGLE_PORT_H
+
+#if defined(CONFIG_TOSHIBA_JMR3927)
+extern unsigned long (*__swizzle_addr_b)(unsigned long port);
+#define NEEDS_TXX9_SWIZZLE_ADDR_B
+#else
+#define __swizzle_addr_b(port)	(port)
+#endif
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#define ioswabb(a, x)		(x)
+#define __mem_ioswabb(a, x)	(x)
+#define ioswabw(a, x)		le16_to_cpu(x)
+#define __mem_ioswabw(a, x)	(x)
+#define ioswabl(a, x)		le32_to_cpu(x)
+#define __mem_ioswabl(a, x)	(x)
+#define ioswabq(a, x)		le64_to_cpu(x)
+#define __mem_ioswabq(a, x)	(x)
+
+#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/war.h b/arch/mips/include/asm/mach-tx39xx/war.h
new file mode 100644
index 0000000..4338146
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H
+#define __ASM_MIPS_MACH_TX39XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
new file mode 100644
index 0000000..275eaf9
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_llsc	1
+#define cpu_has_64bits	1
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_has_mips16		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp	0
+#define cpu_has_mipsmt	0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
new file mode 100644
index 0000000..1e7beae
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -0,0 +1,43 @@
+/*
+ *	include/asm-mips/mach-tx49xx/ioremap.h
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX49XX_IOREMAP_H
+#define __ASM_MACH_TX49XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+#ifdef CONFIG_64BIT
+#define TXX9_DIRECTMAP_BASE	0xfff000000ul
+#else
+#define TXX9_DIRECTMAP_BASE	0xff000000ul
+#endif
+	if (offset >= TXX9_DIRECTMAP_BASE &&
+	    offset < TXX9_DIRECTMAP_BASE + 0x400000)
+		return (void __iomem *)(unsigned long)(int)offset;
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >=
+		(unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff);
+}
+
+#endif /* __ASM_MACH_TX49XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
new file mode 100644
index 0000000..913ff19
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_TX49XX_KMALLOC_H
+#define __ASM_MACH_TX49XX_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h
new file mode 100644
index 0000000..39b5d11
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H
+#define __ASM_MIPS_MACH_TX49XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	1
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/irq.h b/arch/mips/include/asm/mach-vr41xx/irq.h
new file mode 100644
index 0000000..862058d3
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/irq.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_VR41XX_IRQ_H
+#define __ASM_MACH_VR41XX_IRQ_H
+
+#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/war.h b/arch/mips/include/asm/mach-vr41xx/war.h
new file mode 100644
index 0000000..56a3892
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H
+#define __ASM_MIPS_MACH_VR41XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
new file mode 100644
index 0000000..83746b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
@@ -0,0 +1,83 @@
+/*
+ * This is a direct copy of the ev96100.h file, with a global
+ * search and replace.  The numbers are the same.
+ *
+ * The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef __ASM_MIPS_GT64120_H
+#define __ASM_MIPS_GT64120_H
+
+/*
+ * This is the CPU physical memory map of PPMC Board:
+ *
+ *    0x00000000-0x03FFFFFF      - 64MB SDRAM (SCS[0]#)
+ *    0x1C000000-0x1C000000      - LED (CS0)
+ *    0x1C800000-0x1C800007      - UART 16550 port (CS1)
+ *    0x1F000000-0x1F000000      - MailBox (CS3)
+ *    0x1FC00000-0x20000000      - 4MB Flash (BOOT CS)
+ */
+
+#define WRPPMC_SDRAM_SCS0_BASE	0x00000000
+#define WRPPMC_SDRAM_SCS0_SIZE	0x04000000
+
+#define WRPPMC_UART16550_BASE	0x1C800000
+#define WRPPMC_UART16550_CLOCK	3686400 /* 3.68MHZ */
+
+#define WRPPMC_LED_BASE		0x1C000000
+#define WRPPMC_MBOX_BASE	0x1F000000
+
+#define WRPPMC_BOOTROM_BASE	0x1FC00000
+#define WRPPMC_BOOTROM_SIZE	0x00400000 /* 4M Flash */
+
+#define WRPPMC_MIPS_TIMER_IRQ	7 /* MIPS compare/count timer interrupt */
+#define WRPPMC_UART16550_IRQ	6
+#define WRPPMC_PCI_INTA_IRQ	3
+
+/*
+ * PCI Bus I/O and Memory resources allocation
+ *
+ * NOTE: We only have PCI_0 hose interface
+ */
+#define GT_PCI_MEM_BASE	0x13000000UL
+#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_IO_BASE	0x11000000UL
+#define GT_PCI_IO_SIZE	0x02000000UL
+
+/*
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
+ * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
+ * boards, they all either come in on IntD or they all come in on IntA, they
+ * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
+ * "requested" interrupt numbers and go through the list whenever we get an
+ * IntA/D.
+ *
+ * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
+ * INTD is 11.
+ */
+#define GT_TIMER	4
+#define GT_INTA		2
+#define GT_INTD		5
+
+#ifndef __ASSEMBLY__
+
+/*
+ * GT64120 internal register space base address
+ */
+extern unsigned long gt64120_base;
+
+#define GT64120_BASE	(gt64120_base)
+
+/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
+#undef WRPPMC_EARLY_DEBUG
+
+#ifdef WRPPMC_EARLY_DEBUG
+extern void wrppmc_led_on(int mask);
+extern void wrppmc_led_off(int mask);
+extern void wrppmc_early_printk(const char *fmt, ...);
+#else
+#define wrppmc_early_printk(fmt, ...) do {} while (0)
+#endif /* WRPPMC_EARLY_DEBUG */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_MIPS_GT64120_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h
new file mode 100644
index 0000000..ac48629
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H
+#define __ASM_MIPS_MACH_WRPPMC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */
diff --git a/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
new file mode 100644
index 0000000..470e5e9
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Jaguar ATX always has the RM9000 processor.
+ */
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_divec		0
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		0
+#define cpu_has_ejtag		0
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-yosemite/war.h b/arch/mips/include/asm/mach-yosemite/war.h
new file mode 100644
index 0000000..e5c6d53
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H
+#define __ASM_MIPS_MACH_YOSEMITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		1
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */
diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h
new file mode 100644
index 0000000..cdc379a
--- /dev/null
+++ b/arch/mips/include/asm/mc146818-time.h
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_MC146818_TIME_H
+#define __ASM_MC146818_TIME_H
+
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+
+/*
+ * For check timing call set_rtc_mmss() 500ms; used in timer interrupt.
+ */
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
+{
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds, RTC_SECONDS);
+		CMOS_WRITE(real_minutes, RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	return retval;
+}
+
+static inline unsigned long mc146818_get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	do {
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(day);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	year = mc146818_decode_year(year);
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* __ASM_MC146818_TIME_H */
diff --git a/arch/mips/include/asm/mc146818rtc.h b/arch/mips/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..68b4da6
--- /dev/null
+++ b/arch/mips/include/asm/mc146818rtc.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mc146818rtc.h>
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
new file mode 100644
index 0000000..a0f04bb
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -0,0 +1,436 @@
+/*
+ * Bonito Register Map
+ *
+ * This file is the original bonito.h from Algorithmics with minor changes
+ * to fit into linux.
+ *
+ * Copyright (c) 1999 Algorithmics Ltd
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2001 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * Algorithmics gives permission for anyone to use and modify this file
+ * without any obligation or license condition except that you retain
+ * this copyright message in any source redistribution in whole or part.
+ *
+ */
+
+/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
+/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+
+#ifndef _ASM_MIPS_BOARDS_BONITO64_H
+#define _ASM_MIPS_BOARDS_BONITO64_H
+
+#ifdef __ASSEMBLY__
+
+/* offsets from base register */
+#define BONITO(x)	(x)
+
+#elif defined(CONFIG_LEMOTE_FULONG)
+
+#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
+#define BONITO_IRQ_BASE   32
+
+#else
+
+/*
+ * Algorithmics Bonito64 system controller register base.
+ */
+extern unsigned long _pcictrl_bonito;
+extern unsigned long _pcictrl_bonito_pcicfg;
+
+#define BONITO(x)		*(volatile u32 *)(_pcictrl_bonito + (x))
+
+#endif /* __ASSEMBLY__ */
+
+
+#define BONITO_BOOT_BASE		0x1fc00000
+#define BONITO_BOOT_SIZE		0x00100000
+#define BONITO_BOOT_TOP 		(BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
+#define BONITO_FLASH_BASE		0x1c000000
+#define BONITO_FLASH_SIZE		0x03000000
+#define BONITO_FLASH_TOP		(BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
+#define BONITO_SOCKET_BASE		0x1f800000
+#define BONITO_SOCKET_SIZE		0x00400000
+#define BONITO_SOCKET_TOP		(BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
+#define BONITO_REG_BASE 		0x1fe00000
+#define BONITO_REG_SIZE 		0x00040000
+#define BONITO_REG_TOP			(BONITO_REG_BASE+BONITO_REG_SIZE-1)
+#define BONITO_DEV_BASE 		0x1ff00000
+#define BONITO_DEV_SIZE 		0x00100000
+#define BONITO_DEV_TOP			(BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
+#define BONITO_PCILO_BASE		0x10000000
+#define BONITO_PCILO_SIZE		0x0c000000
+#define BONITO_PCILO_TOP		(BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1)
+#define BONITO_PCILO0_BASE		0x10000000
+#define BONITO_PCILO1_BASE		0x14000000
+#define BONITO_PCILO2_BASE		0x18000000
+#define BONITO_PCIHI_BASE		0x20000000
+#define BONITO_PCIHI_SIZE		0x20000000
+#define BONITO_PCIHI_TOP		(BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1)
+#define BONITO_PCIIO_BASE		0x1fd00000
+#define BONITO_PCIIO_SIZE		0x00100000
+#define BONITO_PCIIO_TOP		(BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1)
+#define BONITO_PCICFG_BASE		0x1fe80000
+#define BONITO_PCICFG_SIZE		0x00080000
+#define BONITO_PCICFG_TOP		(BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1)
+
+
+/* Bonito Register Bases */
+
+#define BONITO_PCICONFIGBASE		0x00
+#define BONITO_REGBASE			0x100
+
+
+/* PCI Configuration  Registers */
+
+#define BONITO_PCI_REG(x)               BONITO(BONITO_PCICONFIGBASE + (x))
+#define BONITO_PCIDID			BONITO_PCI_REG(0x00)
+#define BONITO_PCICMD			BONITO_PCI_REG(0x04)
+#define BONITO_PCICLASS 		BONITO_PCI_REG(0x08)
+#define BONITO_PCILTIMER		BONITO_PCI_REG(0x0c)
+#define BONITO_PCIBASE0 		BONITO_PCI_REG(0x10)
+#define BONITO_PCIBASE1 		BONITO_PCI_REG(0x14)
+#define BONITO_PCIBASE2 		BONITO_PCI_REG(0x18)
+#define BONITO_PCIEXPRBASE		BONITO_PCI_REG(0x30)
+#define BONITO_PCIINT			BONITO_PCI_REG(0x3c)
+
+#define BONITO_PCICMD_PERR_CLR		0x80000000
+#define BONITO_PCICMD_SERR_CLR		0x40000000
+#define BONITO_PCICMD_MABORT_CLR	0x20000000
+#define BONITO_PCICMD_MTABORT_CLR	0x10000000
+#define BONITO_PCICMD_TABORT_CLR	0x08000000
+#define BONITO_PCICMD_MPERR_CLR 	0x01000000
+#define BONITO_PCICMD_PERRRESPEN	0x00000040
+#define BONITO_PCICMD_ASTEPEN		0x00000080
+#define BONITO_PCICMD_SERREN		0x00000100
+#define BONITO_PCILTIMER_BUSLATENCY	0x0000ff00
+#define BONITO_PCILTIMER_BUSLATENCY_SHIFT	8
+
+
+
+
+/* 1. Bonito h/w Configuration */
+/* Power on register */
+
+#define BONITO_BONPONCFG		BONITO(BONITO_REGBASE + 0x00)
+
+#define BONITO_BONPONCFG_SYSCONTROLLERRD	0x00040000
+#define BONITO_BONPONCFG_ROMCS1SAMP	0x00020000
+#define BONITO_BONPONCFG_ROMCS0SAMP	0x00010000
+#define BONITO_BONPONCFG_CPUBIGEND	0x00004000
+/* Added by RPF 11-9-00 */
+#define BONITO_BONPONCFG_BURSTORDER	0x00001000
+/* --- */
+#define BONITO_BONPONCFG_CPUPARITY	0x00002000
+#define BONITO_BONPONCFG_CPUTYPE	0x00000007
+#define BONITO_BONPONCFG_CPUTYPE_SHIFT	0
+#define BONITO_BONPONCFG_PCIRESET_OUT	0x00000008
+#define BONITO_BONPONCFG_IS_ARBITER	0x00000010
+#define BONITO_BONPONCFG_ROMBOOT	0x000000c0
+#define BONITO_BONPONCFG_ROMBOOT_SHIFT	6
+
+#define BONITO_BONPONCFG_ROMBOOT_FLASH	(0x0<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SOCKET (0x1<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SDRAM	(0x2<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_CPURESET	(0x3<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+
+#define BONITO_BONPONCFG_ROMCS0WIDTH	0x00000100
+#define BONITO_BONPONCFG_ROMCS1WIDTH	0x00000200
+#define BONITO_BONPONCFG_ROMCS0FAST	0x00000400
+#define BONITO_BONPONCFG_ROMCS1FAST	0x00000800
+#define BONITO_BONPONCFG_CONFIG_DIS	0x00000020
+
+
+/* Other Bonito configuration */
+
+#define BONITO_BONGENCFG_OFFSET         0x4
+#define BONITO_BONGENCFG		BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET)
+
+#define BONITO_BONGENCFG_DEBUGMODE	0x00000001
+#define BONITO_BONGENCFG_SNOOPEN	0x00000002
+#define BONITO_BONGENCFG_CPUSELFRESET	0x00000004
+
+#define BONITO_BONGENCFG_FORCE_IRQA	0x00000008
+#define BONITO_BONGENCFG_IRQA_ISOUT	0x00000010
+#define BONITO_BONGENCFG_IRQA_FROM_INT1 0x00000020
+#define BONITO_BONGENCFG_BYTESWAP	0x00000040
+
+#define BONITO_BONGENCFG_UNCACHED	0x00000080
+#define BONITO_BONGENCFG_PREFETCHEN	0x00000100
+#define BONITO_BONGENCFG_WBEHINDEN	0x00000200
+#define BONITO_BONGENCFG_CACHEALG	0x00000c00
+#define BONITO_BONGENCFG_CACHEALG_SHIFT 10
+#define BONITO_BONGENCFG_PCIQUEUE	0x00001000
+#define BONITO_BONGENCFG_CACHESTOP	0x00002000
+#define BONITO_BONGENCFG_MSTRBYTESWAP	0x00004000
+#define BONITO_BONGENCFG_BUSERREN	0x00008000
+#define BONITO_BONGENCFG_NORETRYTIMEOUT 0x00010000
+#define BONITO_BONGENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* 2. IO & IDE configuration */
+
+#define BONITO_IODEVCFG 		BONITO(BONITO_REGBASE + 0x08)
+
+/* 3. IO & IDE configuration */
+
+#define BONITO_SDCFG			BONITO(BONITO_REGBASE + 0x0c)
+
+/* 4. PCI address map control */
+
+#define BONITO_PCIMAP			BONITO(BONITO_REGBASE + 0x10)
+#define BONITO_PCIMEMBASECFG		BONITO(BONITO_REGBASE + 0x14)
+#define BONITO_PCIMAP_CFG		BONITO(BONITO_REGBASE + 0x18)
+
+/* 5. ICU & GPIO regs */
+
+/* GPIO Regs - r/w */
+
+#define BONITO_GPIODATA_OFFSET          0x1c
+#define BONITO_GPIODATA 		BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
+#define BONITO_GPIOIE			BONITO(BONITO_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define BONITO_INTEDGE			BONITO(BONITO_REGBASE + 0x24)
+#define BONITO_INTSTEER 		BONITO(BONITO_REGBASE + 0x28)
+#define BONITO_INTPOL			BONITO(BONITO_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define BONITO_INTENSET 		BONITO(BONITO_REGBASE + 0x30)
+#define BONITO_INTENCLR 		BONITO(BONITO_REGBASE + 0x34)
+#define BONITO_INTEN			BONITO(BONITO_REGBASE + 0x38)
+#define BONITO_INTISR			BONITO(BONITO_REGBASE + 0x3c)
+
+/* PCI mail boxes */
+
+#define BONITO_PCIMAIL0_OFFSET          0x40
+#define BONITO_PCIMAIL1_OFFSET          0x44
+#define BONITO_PCIMAIL2_OFFSET          0x48
+#define BONITO_PCIMAIL3_OFFSET          0x4c
+#define BONITO_PCIMAIL0 		BONITO(BONITO_REGBASE + 0x40)
+#define BONITO_PCIMAIL1 		BONITO(BONITO_REGBASE + 0x44)
+#define BONITO_PCIMAIL2 		BONITO(BONITO_REGBASE + 0x48)
+#define BONITO_PCIMAIL3 		BONITO(BONITO_REGBASE + 0x4c)
+
+
+/* 6. PCI cache */
+
+#define BONITO_PCICACHECTRL		BONITO(BONITO_REGBASE + 0x50)
+#define BONITO_PCICACHETAG		BONITO(BONITO_REGBASE + 0x54)
+
+#define BONITO_PCIBADADDR		BONITO(BONITO_REGBASE + 0x58)
+#define BONITO_PCIMSTAT 		BONITO(BONITO_REGBASE + 0x5c)
+
+
+/*
+#define BONITO_PCIRDPOST		BONITO(BONITO_REGBASE + 0x60)
+#define BONITO_PCIDATA			BONITO(BONITO_REGBASE + 0x64)
+*/
+
+/* 7. IDE DMA & Copier */
+
+#define BONITO_CONFIGBASE		0x000
+#define BONITO_BONITOBASE		0x100
+#define BONITO_LDMABASE 		0x200
+#define BONITO_COPBASE			0x300
+#define BONITO_REG_BLOCKMASK		0x300
+
+#define BONITO_LDMACTRL 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMASTAT 		BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMAADDR 		BONITO(BONITO_LDMABASE + 0x4)
+#define BONITO_LDMAGO			BONITO(BONITO_LDMABASE + 0x8)
+#define BONITO_LDMADATA 		BONITO(BONITO_LDMABASE + 0xc)
+
+#define BONITO_COPCTRL			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPSTAT			BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPPADDR 		BONITO(BONITO_COPBASE + 0x4)
+#define BONITO_COPDADDR 		BONITO(BONITO_COPBASE + 0x8)
+#define BONITO_COPGO			BONITO(BONITO_COPBASE + 0xc)
+
+
+/* ###### Bit Definitions for individual Registers #### */
+
+/* Gen DMA. */
+
+#define BONITO_IDECOPDADDR_DMA_DADDR	0x0ffffffc
+#define BONITO_IDECOPDADDR_DMA_DADDR_SHIFT	2
+#define BONITO_IDECOPPADDR_DMA_PADDR	0xfffffffc
+#define BONITO_IDECOPPADDR_DMA_PADDR_SHIFT	2
+#define BONITO_IDECOPGO_DMA_SIZE	0x0000fffe
+#define BONITO_IDECOPGO_DMA_SIZE_SHIFT	0
+#define BONITO_IDECOPGO_DMA_WRITE	0x00010000
+#define BONITO_IDECOPGO_DMAWCOUNT	0x000f0000
+#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT	16
+
+#define BONITO_IDECOPCTRL_DMA_STARTBIT	0x80000000
+#define BONITO_IDECOPCTRL_DMA_RSTBIT	0x40000000
+
+/* DRAM - sdCfg */
+
+#define BONITO_SDCFG_AROWBITS		0x00000003
+#define BONITO_SDCFG_AROWBITS_SHIFT	0
+#define BONITO_SDCFG_ACOLBITS		0x0000000c
+#define BONITO_SDCFG_ACOLBITS_SHIFT	2
+#define BONITO_SDCFG_ABANKBIT		0x00000010
+#define BONITO_SDCFG_ASIDES		0x00000020
+#define BONITO_SDCFG_AABSENT		0x00000040
+#define BONITO_SDCFG_AWIDTH64		0x00000080
+
+#define BONITO_SDCFG_BROWBITS		0x00000300
+#define BONITO_SDCFG_BROWBITS_SHIFT	8
+#define BONITO_SDCFG_BCOLBITS		0x00000c00
+#define BONITO_SDCFG_BCOLBITS_SHIFT	10
+#define BONITO_SDCFG_BBANKBIT		0x00001000
+#define BONITO_SDCFG_BSIDES		0x00002000
+#define BONITO_SDCFG_BABSENT		0x00004000
+#define BONITO_SDCFG_BWIDTH64		0x00008000
+
+#define BONITO_SDCFG_EXTRDDATA		0x00010000
+#define BONITO_SDCFG_EXTRASCAS		0x00020000
+#define BONITO_SDCFG_EXTPRECH		0x00040000
+#define BONITO_SDCFG_EXTRASWIDTH	0x00180000
+#define BONITO_SDCFG_EXTRASWIDTH_SHIFT	19
+/* Changed by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMMODESET	0x00200000
+/* --- */
+#define BONITO_SDCFG_DRAMEXTREGS	0x00400000
+#define BONITO_SDCFG_DRAMPARITY 	0x00800000
+/* Added by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMBURSTLEN 	0x03000000
+#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT	24
+#define BONITO_SDCFG_DRAMMODESET_DONE 	0x80000000
+/* --- */
+
+/* PCI Cache - pciCacheCtrl */
+
+#define BONITO_PCICACHECTRL_CACHECMD	0x00000007
+#define BONITO_PCICACHECTRL_CACHECMD_SHIFT	0
+#define BONITO_PCICACHECTRL_CACHECMDLINE	0x00000018
+#define BONITO_PCICACHECTRL_CACHECMDLINE_SHIFT	3
+#define BONITO_PCICACHECTRL_CMDEXEC	0x00000020
+
+#define BONITO_PCICACHECTRL_IOBCCOH_PRES	0x00000100
+#define BONITO_PCICACHECTRL_IOBCCOH_EN	0x00000200
+#define BONITO_PCICACHECTRL_CPUCOH_PRES	0x00000400
+#define BONITO_PCICACHECTRL_CPUCOH_EN	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_CS0	0x00000001
+#define BONITO_IODEVCFG_SPEEDBIT_CS0	0x00000002
+#define BONITO_IODEVCFG_MOREABITS_CS0	0x00000004
+
+#define BONITO_IODEVCFG_BUFFBIT_CS1	0x00000008
+#define BONITO_IODEVCFG_SPEEDBIT_CS1	0x00000010
+#define BONITO_IODEVCFG_MOREABITS_CS1	0x00000020
+
+#define BONITO_IODEVCFG_BUFFBIT_CS2	0x00000040
+#define BONITO_IODEVCFG_SPEEDBIT_CS2	0x00000080
+#define BONITO_IODEVCFG_MOREABITS_CS2	0x00000100
+
+#define BONITO_IODEVCFG_BUFFBIT_CS3	0x00000200
+#define BONITO_IODEVCFG_SPEEDBIT_CS3	0x00000400
+#define BONITO_IODEVCFG_MOREABITS_CS3	0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_IDE	0x00001000
+#define BONITO_IODEVCFG_SPEEDBIT_IDE	0x00002000
+#define BONITO_IODEVCFG_WORDSWAPBIT_IDE 0x00004000
+#define BONITO_IODEVCFG_MODEBIT_IDE	0x00008000
+#define BONITO_IODEVCFG_DMAON_IDE	0x001f0000
+#define BONITO_IODEVCFG_DMAON_IDE_SHIFT 16
+#define BONITO_IODEVCFG_DMAOFF_IDE	0x01e00000
+#define BONITO_IODEVCFG_DMAOFF_IDE_SHIFT	21
+#define BONITO_IODEVCFG_EPROMSPLIT	0x02000000
+/* Added by RPF 11-9-00 */
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD	0xfc000000
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD_SHIFT 26
+/* --- */
+
+/* gpio */
+#define BONITO_GPIO_GPIOW		0x000003ff
+#define BONITO_GPIO_GPIOW_SHIFT 	0
+#define BONITO_GPIO_GPIOR		0x01ff0000
+#define BONITO_GPIO_GPIOR_SHIFT 	16
+#define BONITO_GPIO_GPINR		0xfe000000
+#define BONITO_GPIO_GPINR_SHIFT 	25
+#define BONITO_GPIO_IOW(N)		(1<<(BONITO_GPIO_GPIOW_SHIFT+(N)))
+#define BONITO_GPIO_IOR(N)		(1<<(BONITO_GPIO_GPIOR_SHIFT+(N)))
+#define BONITO_GPIO_INR(N)		(1<<(BONITO_GPIO_GPINR_SHIFT+(N)))
+
+/* ICU */
+#define BONITO_ICU_MBOXES		0x0000000f
+#define BONITO_ICU_MBOXES_SHIFT 	0
+#define BONITO_ICU_DMARDY		0x00000010
+#define BONITO_ICU_DMAEMPTY		0x00000020
+#define BONITO_ICU_COPYRDY		0x00000040
+#define BONITO_ICU_COPYEMPTY		0x00000080
+#define BONITO_ICU_COPYERR		0x00000100
+#define BONITO_ICU_PCIIRQ		0x00000200
+#define BONITO_ICU_MASTERERR		0x00000400
+#define BONITO_ICU_SYSTEMERR		0x00000800
+#define BONITO_ICU_DRAMPERR		0x00001000
+#define BONITO_ICU_RETRYERR		0x00002000
+#define BONITO_ICU_GPIOS		0x01ff0000
+#define BONITO_ICU_GPIOS_SHIFT		16
+#define BONITO_ICU_GPINS		0x7e000000
+#define BONITO_ICU_GPINS_SHIFT		25
+#define BONITO_ICU_MBOX(N)		(1<<(BONITO_ICU_MBOXES_SHIFT+(N)))
+#define BONITO_ICU_GPIO(N)		(1<<(BONITO_ICU_GPIOS_SHIFT+(N)))
+#define BONITO_ICU_GPIN(N)		(1<<(BONITO_ICU_GPINS_SHIFT+(N)))
+
+/* pcimap */
+
+#define BONITO_PCIMAP_PCIMAP_LO0	0x0000003f
+#define BONITO_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define BONITO_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define BONITO_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define BONITO_PCIMAP_PCIMAP_LO2	0x0003f000
+#define BONITO_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define BONITO_PCIMAP_PCIMAP_2		0x00040000
+#define BONITO_PCIMAP_WIN(WIN, ADDR)	((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#define BONITO_PCIMAP_WINSIZE           (1<<26)
+#define BONITO_PCIMAP_WINOFFSET(ADDR)	((ADDR) & (BONITO_PCIMAP_WINSIZE - 1))
+#define BONITO_PCIMAP_WINBASE(ADDR)	((ADDR) << 26)
+
+/* pcimembaseCfg */
+
+#define BONITO_PCIMEMBASECFG_MASK               0xf0000000
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK	0x0000001f
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT	0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS	0x000003e0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT	5
+#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED	0x00000400
+#define BONITO_PCIMEMBASECFG_MEMBASE0_IO	0x00000800
+
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK	0x0001f000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT	12
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS	0x003e0000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT	17
+#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED	0x00400000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_IO	0x00800000
+
+#define BONITO_PCIMEMBASECFG_ASHIFT	23
+#define BONITO_PCIMEMBASECFG_AMASK              0x007fffff
+#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE)	(((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)
+#define BONITO_PCIMEMBASECFGBASE(WIN, BASE)	(((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS)
+
+#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG)  (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK)
+
+
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+
+#define BONITO_PCITOPHYS(WIN, ADDR, CFG)          ( \
+                                                  (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \
+                                                  (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \
+                                                )
+
+/* PCICmd */
+
+#define BONITO_PCICMD_MEMEN		0x00000002
+#define BONITO_PCICMD_MSTREN		0x00000004
+
+
+#endif /* _ASM_MIPS_BOARDS_BONITO64_H */
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
new file mode 100644
index 0000000..7f0b034
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -0,0 +1,104 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the MIPS boards specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_GENERIC_H
+#define __ASM_MIPS_BOARDS_GENERIC_H
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/mips-boards/bonito64.h>
+
+/*
+ * Display register base.
+ */
+#define ASCII_DISPLAY_WORD_BASE    0x1f000410
+#define ASCII_DISPLAY_POS_BASE     0x1f000418
+
+
+/*
+ * Yamon Prom print address.
+ */
+#define YAMON_PROM_PRINT_ADDR      0x1fc00504
+
+
+/*
+ * Reset register.
+ */
+#define SOFTRES_REG       0x1f000500
+#define GORESET           0x42
+
+/*
+ * Revision register.
+ */
+#define MIPS_REVISION_REG                  0x1fc00010
+#define MIPS_REVISION_CORID_QED_RM5261     0
+#define MIPS_REVISION_CORID_CORE_LV        1
+#define MIPS_REVISION_CORID_BONITO64       2
+#define MIPS_REVISION_CORID_CORE_20K       3
+#define MIPS_REVISION_CORID_CORE_FPGA      4
+#define MIPS_REVISION_CORID_CORE_MSC       5
+#define MIPS_REVISION_CORID_CORE_EMUL      6
+#define MIPS_REVISION_CORID_CORE_FPGA2     7
+#define MIPS_REVISION_CORID_CORE_FPGAR2    8
+#define MIPS_REVISION_CORID_CORE_FPGA3     9
+#define MIPS_REVISION_CORID_CORE_24K       10
+#define MIPS_REVISION_CORID_CORE_FPGA4     11
+#define MIPS_REVISION_CORID_CORE_FPGA5     12
+
+/**** Artificial corid defines ****/
+/*
+ *  CoreEMUL with   Bonito   System Controller is treated like a Core20K
+ *  CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC
+ */
+#define MIPS_REVISION_CORID_CORE_EMUL_BON  -1
+#define MIPS_REVISION_CORID_CORE_EMUL_MSC  -2
+
+#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f)
+
+extern int mips_revision_corid;
+
+#define MIPS_REVISION_SCON_OTHER	   0
+#define MIPS_REVISION_SCON_SOCITSC	   1
+#define MIPS_REVISION_SCON_SOCITSCP	   2
+
+/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */
+#define MIPS_REVISION_SCON_UNKNOWN	   -1
+#define MIPS_REVISION_SCON_GT64120	   -2
+#define MIPS_REVISION_SCON_BONITO	   -3
+#define MIPS_REVISION_SCON_BRTL		   -4
+#define MIPS_REVISION_SCON_SOCIT	   -5
+#define MIPS_REVISION_SCON_ROCIT	   -6
+
+#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff)
+
+extern int mips_revision_sconid;
+
+extern void mips_reboot_setup(void);
+
+#ifdef CONFIG_PCI
+extern void mips_pcibios_init(void);
+#else
+#define mips_pcibios_init() do { } while (0)
+#endif
+
+#ifdef CONFIG_KGDB
+extern void kgdb_config(void);
+#endif
+
+#endif  /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h
new file mode 100644
index 0000000..d8ae7f9
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/launch.h
@@ -0,0 +1,35 @@
+/*
+ *
+ */
+
+#ifndef _ASSEMBLER_
+
+struct cpulaunch {
+    unsigned long	pc;
+    unsigned long	gp;
+    unsigned long	sp;
+    unsigned long	a0;
+    unsigned long	_pad[3]; /* pad to cache line size to avoid thrashing */
+    unsigned long	flags;
+};
+
+#else
+
+#define LOG2CPULAUNCH	5
+#define	LAUNCH_PC	0
+#define	LAUNCH_GP	4
+#define	LAUNCH_SP	8
+#define	LAUNCH_A0	12
+#define	LAUNCH_FLAGS	28
+
+#endif
+
+#define LAUNCH_FREADY	1
+#define LAUNCH_FGO	2
+#define LAUNCH_FGONE	4
+
+#define CPULAUNCH	0x00000f00
+#define NCPULAUNCH	8
+
+/* Polling period in count cycles for secondary CPU's */
+#define LAUNCHPERIOD	10000
diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h
new file mode 100644
index 0000000..c189157
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/malta.h
@@ -0,0 +1,102 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the Malta board specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_MALTA_H
+#define __ASM_MIPS_BOARDS_MALTA_H
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mips-boards/msc01_pci.h>
+#include <asm/gt64120.h>
+
+/* Mips interrupt controller found in SOCit variations */
+#define MIPS_MSC01_IC_REG_BASE		0x1bc40000
+#define MIPS_SOCITSC_IC_REG_BASE	0x1ffa0000
+
+/*
+ * Malta I/O ports base address for the Galileo GT64120 and Algorithmics
+ * Bonito system controllers.
+ */
+#define MALTA_GT_PORT_BASE      get_gt_port_base(GT_PCI0IOLD_OFS)
+#define MALTA_BONITO_PORT_BASE  ((unsigned long)ioremap (0x1fd00000, 0x10000))
+#define MALTA_MSC_PORT_BASE     get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	addr = GT_READ(reg);
+	return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+	unsigned long addr;
+	MSC_READ(reg, addr);
+	return (unsigned long) ioremap(addr, 0x10000);
+}
+
+/*
+ * GCMP Specific definitions
+ */
+#define GCMP_BASE_ADDR			0x1fbf8000
+#define GCMP_ADDRSPACE_SZ		(256 * 1024)
+
+/*
+ * GIC Specific definitions
+ */
+#define GIC_BASE_ADDR			0x1bdc0000
+#define GIC_ADDRSPACE_SZ		(128 * 1024)
+
+/*
+ * MSC01 BIU Specific definitions
+ * FIXME : These should be elsewhere ?
+ */
+#define MSC01_BIU_REG_BASE		0x1bc80000
+#define MSC01_BIU_ADDRSPACE_SZ		(256 * 1024)
+#define MSC01_SC_CFG_OFS		0x0110
+#define MSC01_SC_CFG_GICPRES_MSK	0x00000004
+#define MSC01_SC_CFG_GICPRES_SHF	2
+#define MSC01_SC_CFG_GICENA_SHF		3
+
+/*
+ * Malta RTC-device indirect register access.
+ */
+#define MALTA_RTC_ADR_REG       0x70
+#define MALTA_RTC_DAT_REG       0x71
+
+/*
+ * Malta SMSC FDC37M817 Super I/O Controller register.
+ */
+#define SMSC_CONFIG_REG		0x3f0
+#define SMSC_DATA_REG		0x3f1
+
+#define SMSC_CONFIG_DEVNUM	0x7
+#define SMSC_CONFIG_ACTIVATE	0x30
+#define SMSC_CONFIG_ENTER	0x55
+#define SMSC_CONFIG_EXIT	0xaa
+
+#define SMSC_CONFIG_DEVNUM_FLOPPY     0
+
+#define SMSC_CONFIG_ACTIVATE_ENABLE   1
+
+#define SMSC_WRITE(x, a)     outb(x, a)
+
+#define MALTA_JMPRS_REG		0x1f000210
+
+#endif /* __ASM_MIPS_BOARDS_MALTA_H */
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
new file mode 100644
index 0000000..cea872f
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -0,0 +1,110 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Malta interrupt controller.
+ *
+ */
+#ifndef _MIPS_MALTAINT_H
+#define _MIPS_MALTAINT_H
+
+#include <irq.h>
+
+/*
+ * Interrupts 0..15 are used for Malta ISA compatible interrupts
+ */
+#define MALTA_INT_BASE		0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0		0
+#define MIPSCPU_INT_SW1		1
+#define MIPSCPU_INT_MB0		2
+#define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1		3
+#define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
+#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1	/* GIC IPI */
+#define MIPSCPU_INT_MB2		4
+#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2	/* GIC IPI */
+#define MIPSCPU_INT_MB3		5
+#define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
+#define MIPSCPU_INT_MB4		6
+#define MIPSCPU_INT_CORELO	MIPSCPU_INT_MB4
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE		64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR		0
+#define MSC01C_INT_PCI		1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE		64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0		1
+#define MSC01E_INT_SW1		2
+#define MSC01E_INT_MB0		3
+#define MSC01E_INT_I8259A	MSC01E_INT_MB0
+#define MSC01E_INT_MB1		4
+#define MSC01E_INT_SMI		MSC01E_INT_MB1
+#define MSC01E_INT_MB2		5
+#define MSC01E_INT_MB3		6
+#define MSC01E_INT_COREHI	MSC01E_INT_MB3
+#define MSC01E_INT_MB4		7
+#define MSC01E_INT_CORELO	MSC01E_INT_MB4
+#define MSC01E_INT_TMR		8
+#define MSC01E_INT_PCI		9
+#define MSC01E_INT_PERFCTR	10
+#define MSC01E_INT_CPUCTR	11
+
+/* GIC's Nomenclature for Core Interrupt Pins on the Malta */
+#define GIC_CPU_INT0		0 /* Core Interrupt 2 	*/
+#define GIC_CPU_INT1		1 /* .			*/
+#define GIC_CPU_INT2		2 /* .			*/
+#define GIC_CPU_INT3		3 /* .			*/
+#define GIC_CPU_INT4		4 /* .			*/
+#define GIC_CPU_INT5		5 /* Core Interrupt 5   */
+
+#define GIC_EXT_INTR(x)		x
+
+/* Dummy data */
+#define X			0xdead
+
+/* External Interrupts used for IPI */
+#define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
+#define GIC_IPI_EXT_INTR_RESCHED_VPE1	18
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE1	19
+#define GIC_IPI_EXT_INTR_RESCHED_VPE2	20
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE2	21
+#define GIC_IPI_EXT_INTR_RESCHED_VPE3	22
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE3	23
+
+#define MIPS_GIC_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
+
+#ifndef __ASSEMBLY__
+extern void maltaint_init(void);
+#endif
+
+#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/msc01_pci.h b/arch/mips/include/asm/mips-boards/msc01_pci.h
new file mode 100644
index 0000000..e036b7d
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/msc01_pci.h
@@ -0,0 +1,258 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2002, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H
+#define __ASM_MIPS_BOARDS_MSC01_PCI_H
+
+/*
+ * Register offset addresses
+ */
+
+#define MSC01_PCI_ID_OFS		0x0000
+#define MSC01_PCI_SC2PMBASL_OFS		0x0208
+#define MSC01_PCI_SC2PMMSKL_OFS		0x0218
+#define MSC01_PCI_SC2PMMAPL_OFS		0x0228
+#define MSC01_PCI_SC2PIOBASL_OFS	0x0248
+#define MSC01_PCI_SC2PIOMSKL_OFS	0x0258
+#define MSC01_PCI_SC2PIOMAPL_OFS	0x0268
+#define MSC01_PCI_P2SCMSKL_OFS		0x0308
+#define MSC01_PCI_P2SCMAPL_OFS		0x0318
+#define MSC01_PCI_INTCFG_OFS		0x0600
+#define MSC01_PCI_INTSTAT_OFS		0x0608
+#define MSC01_PCI_CFGADDR_OFS		0x0610
+#define MSC01_PCI_CFGDATA_OFS		0x0618
+#define MSC01_PCI_IACK_OFS		0x0620
+#define MSC01_PCI_HEAD0_OFS		0x2000	/* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS		0x2008	/* Status, Command */
+#define MSC01_PCI_HEAD2_OFS		0x2010	/* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS		0x2018	/* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS		0x2020	/* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS		0x2028	/* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS		0x2030	/* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS		0x2038	/* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS		0x2040	/* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS		0x2048	/* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS		0x2050	/* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS		0x2058	/* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS		0x2060	/* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS		0x2068	/* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS		0x2070	/* reserved */
+#define MSC01_PCI_HEAD15_OFS		0x2078	/* Maxl, ming, intpin, int */
+#define MSC01_PCI_BAR0_OFS		0x2220
+#define MSC01_PCI_CFG_OFS		0x2380
+#define MSC01_PCI_SWAP_OFS		0x2388
+
+
+/*****************************************************************************
+ * Register encodings
+ ****************************************************************************/
+
+#define MSC01_PCI_ID_ID_SHF		16
+#define MSC01_PCI_ID_ID_MSK		0x00ff0000
+#define MSC01_PCI_ID_ID_HOSTBRIDGE	82
+#define MSC01_PCI_ID_MAR_SHF		8
+#define MSC01_PCI_ID_MAR_MSK		0x0000ff00
+#define MSC01_PCI_ID_MIR_SHF		0
+#define MSC01_PCI_ID_MIR_MSK		0x000000ff
+
+#define MSC01_PCI_SC2PMBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PMBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PMMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PMMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PMMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOBASL_BAS_SHF	24
+#define MSC01_PCI_SC2PIOBASL_BAS_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMSKL_MSK_SHF	24
+#define MSC01_PCI_SC2PIOMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_SC2PIOMAPL_MAP_SHF	24
+#define MSC01_PCI_SC2PIOMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMSKL_MSK_SHF	24
+#define MSC01_PCI_P2SCMSKL_MSK_MSK	0xff000000
+
+#define MSC01_PCI_P2SCMAPL_MAP_SHF	24
+#define MSC01_PCI_P2SCMAPL_MAP_MSK	0xff000000
+
+#define MSC01_PCI_INTCFG_RST_SHF	10
+#define MSC01_PCI_INTCFG_RST_MSK	0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT	0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF	9
+#define MSC01_PCI_INTCFG_MWE_MSK	0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT	0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF	8
+#define MSC01_PCI_INTCFG_DTO_MSK	0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT	0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF		7
+#define MSC01_PCI_INTCFG_MA_MSK		0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT		0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF		6
+#define MSC01_PCI_INTCFG_TA_MSK		0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT		0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF	5
+#define MSC01_PCI_INTCFG_RTY_MSK	0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT	0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF	4
+#define MSC01_PCI_INTCFG_MWP_MSK	0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT	0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF	3
+#define MSC01_PCI_INTCFG_MRP_MSK	0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT	0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF	2
+#define MSC01_PCI_INTCFG_SWP_MSK	0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT	0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF	1
+#define MSC01_PCI_INTCFG_SRP_MSK	0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT	0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF		0
+#define MSC01_PCI_INTCFG_SE_MSK		0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT		0x00000001
+
+#define MSC01_PCI_INTSTAT_RST_SHF	10
+#define MSC01_PCI_INTSTAT_RST_MSK	0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT	0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF	9
+#define MSC01_PCI_INTSTAT_MWE_MSK	0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT	0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF	8
+#define MSC01_PCI_INTSTAT_DTO_MSK	0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT	0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF	7
+#define MSC01_PCI_INTSTAT_MA_MSK	0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT	0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF	6
+#define MSC01_PCI_INTSTAT_TA_MSK	0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT	0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF	5
+#define MSC01_PCI_INTSTAT_RTY_MSK	0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT	0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF	4
+#define MSC01_PCI_INTSTAT_MWP_MSK	0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT	0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF	3
+#define MSC01_PCI_INTSTAT_MRP_MSK	0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT	0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF	2
+#define MSC01_PCI_INTSTAT_SWP_MSK	0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT	0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF	1
+#define MSC01_PCI_INTSTAT_SRP_MSK	0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT	0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF	0
+#define MSC01_PCI_INTSTAT_SE_MSK	0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT	0x00000001
+
+#define MSC01_PCI_CFGADDR_BNUM_SHF	16
+#define MSC01_PCI_CFGADDR_BNUM_MSK	0x00ff0000
+#define MSC01_PCI_CFGADDR_DNUM_SHF	11
+#define MSC01_PCI_CFGADDR_DNUM_MSK	0x0000f800
+#define MSC01_PCI_CFGADDR_FNUM_SHF	8
+#define MSC01_PCI_CFGADDR_FNUM_MSK	0x00000700
+#define MSC01_PCI_CFGADDR_RNUM_SHF	2
+#define MSC01_PCI_CFGADDR_RNUM_MSK	0x000000fc
+
+#define MSC01_PCI_CFGDATA_DATA_SHF	0
+#define MSC01_PCI_CFGDATA_DATA_MSK	0xffffffff
+
+/* The defines below are ONLY valid for a MEM bar! */
+#define MSC01_PCI_BAR0_SIZE_SHF		4
+#define MSC01_PCI_BAR0_SIZE_MSK		0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF		3
+#define MSC01_PCI_BAR0_P_MSK		0x00000008
+#define MSC01_PCI_BAR0_P_BIT		MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF		1
+#define MSC01_PCI_BAR0_D_MSK		0x00000006
+#define MSC01_PCI_BAR0_T_SHF		0
+#define MSC01_PCI_BAR0_T_MSK		0x00000001
+#define MSC01_PCI_BAR0_T_BIT		MSC01_PCI_BAR0_T_MSK
+
+
+#define MSC01_PCI_CFG_RA_SHF		17
+#define MSC01_PCI_CFG_RA_MSK		0x00020000
+#define MSC01_PCI_CFG_RA_BIT		MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF		16
+#define MSC01_PCI_CFG_G_MSK		0x00010000
+#define MSC01_PCI_CFG_G_BIT		MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF		15
+#define MSC01_PCI_CFG_EN_MSK		0x00008000
+#define MSC01_PCI_CFG_EN_BIT		MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF	0
+#define MSC01_PCI_CFG_MAXRTRY_MSK	0x00000fff
+
+#define MSC01_PCI_SWAP_IO_SHF		18
+#define MSC01_PCI_SWAP_IO_MSK		0x000c0000
+#define MSC01_PCI_SWAP_MEM_SHF		16
+#define MSC01_PCI_SWAP_MEM_MSK		0x00030000
+#define MSC01_PCI_SWAP_BAR0_SHF		0
+#define MSC01_PCI_SWAP_BAR0_MSK		0x00000003
+#define MSC01_PCI_SWAP_NOSWAP		0
+#define MSC01_PCI_SWAP_BYTESWAP		1
+
+/*
+ * MIPS System controller PCI register base.
+ *
+ * FIXME - are these macros specific to Malta and co or to the MSC?  If the
+ * latter, they should be moved elsewhere.
+ */
+#define MIPS_MSC01_PCI_REG_BASE		0x1bd00000
+#define MIPS_SOCITSC_PCI_REG_BASE	0x1ff10000
+
+extern unsigned long _pcictrl_msc;
+
+#define MSC01_PCI_REG_BASE	_pcictrl_msc
+
+#define MSC_WRITE(reg, data)	do { *(volatile u32 *)(reg) = data; } while (0)
+#define MSC_READ(reg, data)	do { data = *(volatile u32 *)(reg); } while (0)
+
+/*
+ * Registers absolute addresses
+ */
+
+#define MSC01_PCI_ID		(MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL	(MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL	(MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG	(MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT	(MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR	(MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA	(MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_IACK		(MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
+#define MSC01_PCI_HEAD0		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
+#define MSC01_PCI_HEAD1		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
+#define MSC01_PCI_HEAD2		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS)
+#define MSC01_PCI_HEAD3		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS)
+#define MSC01_PCI_HEAD4		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS)
+#define MSC01_PCI_HEAD5		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS)
+#define MSC01_PCI_HEAD6		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS)
+#define MSC01_PCI_HEAD7		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS)
+#define MSC01_PCI_HEAD8		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS)
+#define MSC01_PCI_HEAD9		(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS)
+#define MSC01_PCI_HEAD10	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS)
+#define MSC01_PCI_HEAD11	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD12	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD13	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD14	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15	(MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_BAR0		(MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
+#define MSC01_PCI_CFG		(MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
+#define MSC01_PCI_SWAP		(MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
new file mode 100644
index 0000000..2971d60
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -0,0 +1,80 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Register definitions for Intel PIIX4 South Bridge Device.
+ */
+#ifndef __ASM_MIPS_BOARDS_PIIX4_H
+#define __ASM_MIPS_BOARDS_PIIX4_H
+
+/************************************************************************
+ *  IO register offsets
+ ************************************************************************/
+#define PIIX4_ICTLR1_ICW1	0x20
+#define PIIX4_ICTLR1_ICW2	0x21
+#define PIIX4_ICTLR1_ICW3	0x21
+#define PIIX4_ICTLR1_ICW4	0x21
+#define PIIX4_ICTLR2_ICW1	0xa0
+#define PIIX4_ICTLR2_ICW2	0xa1
+#define PIIX4_ICTLR2_ICW3	0xa1
+#define PIIX4_ICTLR2_ICW4	0xa1
+#define PIIX4_ICTLR1_OCW1	0x21
+#define PIIX4_ICTLR1_OCW2	0x20
+#define PIIX4_ICTLR1_OCW3	0x20
+#define PIIX4_ICTLR1_OCW4	0x20
+#define PIIX4_ICTLR2_OCW1	0xa1
+#define PIIX4_ICTLR2_OCW2	0xa0
+#define PIIX4_ICTLR2_OCW3	0xa0
+#define PIIX4_ICTLR2_OCW4	0xa0
+
+
+/************************************************************************
+ *  Register encodings.
+ ************************************************************************/
+#define PIIX4_OCW2_NSEOI	(0x1 << 5)
+#define PIIX4_OCW2_SEOI		(0x3 << 5)
+#define PIIX4_OCW2_RNSEOI	(0x5 << 5)
+#define PIIX4_OCW2_RAEOIS	(0x4 << 5)
+#define PIIX4_OCW2_RAEOIC	(0x0 << 5)
+#define PIIX4_OCW2_RSEOI	(0x7 << 5)
+#define PIIX4_OCW2_SP		(0x6 << 5)
+#define PIIX4_OCW2_NOP		(0x2 << 5)
+
+#define PIIX4_OCW2_SEL          (0x0 << 3)
+
+#define PIIX4_OCW2_ILS_0	0
+#define PIIX4_OCW2_ILS_1	1
+#define PIIX4_OCW2_ILS_2	2
+#define PIIX4_OCW2_ILS_3	3
+#define PIIX4_OCW2_ILS_4	4
+#define PIIX4_OCW2_ILS_5	5
+#define PIIX4_OCW2_ILS_6	6
+#define PIIX4_OCW2_ILS_7	7
+#define PIIX4_OCW2_ILS_8	0
+#define PIIX4_OCW2_ILS_9	1
+#define PIIX4_OCW2_ILS_10	2
+#define PIIX4_OCW2_ILS_11	3
+#define PIIX4_OCW2_ILS_12	4
+#define PIIX4_OCW2_ILS_13	5
+#define PIIX4_OCW2_ILS_14	6
+#define PIIX4_OCW2_ILS_15	7
+
+#define PIIX4_OCW3_SEL          (0x1 << 3)
+
+#define PIIX4_OCW3_IRR          0x2
+#define PIIX4_OCW3_ISR          0x3
+
+#endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h
new file mode 100644
index 0000000..a9db576
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/prom.h
@@ -0,0 +1,47 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern void mips_scroll_message(void);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+        unsigned long base; /* Within KSEG0. */
+        unsigned int size;  /* In bytes. */
+        unsigned int type;  /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h
new file mode 100644
index 0000000..acb7c23
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/sim.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_MIPS_BOARDS_SIM_H
+#define _ASM_MIPS_BOARDS_SIM_H
+
+#define STATS_ON        1
+#define STATS_OFF       2
+#define STATS_CLEAR     3
+#define STATS_DUMP      4
+#define TRACE_ON		5
+#define TRACE_OFF       6
+
+
+#define simcfg(code)						\
+({					   \
+	__asm__  __volatile__( \
+        "sltiu $0,$0, %0" \
+		::"i"(code)					\
+		); \
+})
+
+
+
+#endif
diff --git a/arch/mips/include/asm/mips-boards/simint.h b/arch/mips/include/asm/mips-boards/simint.h
new file mode 100644
index 0000000..8ef6db7
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/simint.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _MIPS_SIMINT_H
+#define _MIPS_SIMINT_H
+
+#include <irq.h>
+
+#define SIM_INT_BASE		0
+#define MIPSCPU_INT_MB0		2
+#define MIPS_CPU_TIMER_IRQ	7
+
+
+#define MSC01E_INT_BASE		64
+
+#define MSC01E_INT_CPUCTR	11
+
+#endif
diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h
new file mode 100644
index 0000000..ac79352
--- /dev/null
+++ b/arch/mips/include/asm/mips_mt.h
@@ -0,0 +1,26 @@
+/*
+ * Definitions and decalrations for MIPS MT support
+ * that are common between SMTC, VSMP, and/or AP/SP
+ * kernel models.
+ */
+#ifndef __ASM_MIPS_MT_H
+#define __ASM_MIPS_MT_H
+
+#include <linux/cpumask.h>
+
+/*
+ * How many VPEs and TCs is Linux allowed to use?  0 means no limit.
+ */
+extern int tclimit;
+extern int vpelimit;
+
+extern cpumask_t mt_fpu_cpumask;
+extern unsigned long mt_fpemul_threshold;
+
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+extern void mips_mt_set_cpuoptions(void);
+
+struct class;
+extern struct class *mt_class;
+
+#endif /* __ASM_MIPS_MT_H */
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
new file mode 100644
index 0000000..c9420aa
--- /dev/null
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -0,0 +1,395 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/mipsregs.h>
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol()		__read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val)	__write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0()		__read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1()		__read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol()		__read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val)	__write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL		$0, 1
+#define CP0_MVPCONF0		$0, 2
+#define CP0_MVPCONF1		$0, 3
+#define CP0_VPECONTROL		$1, 1
+#define CP0_VPECONF0		$1, 2
+#define CP0_VPECONF1		$1, 3
+#define CP0_YQMASK		$1, 4
+#define CP0_VPESCHEDULE	$1, 5
+#define CP0_VPESCHEFBK		$1, 6
+#define CP0_TCSTATUS		$2, 1
+#define CP0_TCBIND		$2, 2
+#define CP0_TCRESTART		$2, 3
+#define CP0_TCHALT		$2, 4
+#define CP0_TCCONTEXT		$2, 5
+#define CP0_TCSCHEDULE		$2, 6
+#define CP0_TCSCHEFBK		$2, 7
+#define CP0_SRSCONF0		$6, 1
+#define CP0_SRSCONF1		$6, 2
+#define CP0_SRSCONF2		$6, 3
+#define CP0_SRSCONF3		$6, 4
+#define CP0_SRSCONF4		$6, 5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP		(_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT	1
+#define MVPCONTROL_VPC		(_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT	2
+#define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT	0
+#define MVPCONF0_PTC		( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT	10
+#define MVPCONF0_PVPE		( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT	15
+#define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT	16
+#define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT	29
+#define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT	31
+#define MVPCONF0_M		(_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT	2
+#define CONFIG3_MT		(_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC	(_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT	15
+#define VPECONTROL_TE		(_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT	16
+#define VPECONTROL_EXCPT	(_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU		0
+#define THREX_TO		1
+#define THREX_IYQ		2
+#define THREX_GSX		3
+#define THREX_YSCH		4
+#define THREX_GSSCH		5
+
+#define VPECONTROL_GSI_SHIFT	20
+#define VPECONTROL_GSI		(_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT	21
+#define VPECONTROL_YSI		(_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT	0
+#define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT	1
+#define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT	21
+#define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID		(_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT	10
+#define TCSTATUS_IXMT		(_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT	11
+#define TCSTATUS_TKSU		(_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT	13
+#define TCSTATUS_A		(_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT	15
+#define TCSTATUS_DA		(_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT	20
+#define TCSTATUS_DT		(_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT	21
+#define TCSTATUS_TDS		(_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT	22
+#define TCSTATUS_TSST		(_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT	23
+#define TCSTATUS_RNST		(_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING		0
+#define TC_WAITING		1
+#define TC_YIELDING		2
+#define TC_GATED		3
+
+#define TCSTATUS_TMX_SHIFT	27
+#define TCSTATUS_TMX		(_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT	0
+#define TCBIND_CURVPE		(_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT	21
+
+#define TCBIND_CURTC		(_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H		(_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int dvpe(void)
+{
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41610001		# dvpe $1		\n"
+	"	move	%0, $1						\n"
+	"	ehb							\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_evpe(void)
+{
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41600021		# evpe			\n"
+	"	ehb							\n"
+	"	.set	pop						\n");
+}
+
+/* Enable virtual processor execution if previous suggested it should be.
+   EVPE_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+	if ((previous & MVPCONTROL_EVP))
+		__raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	mips32r2					\n"
+	"	.set	noat						\n"
+	"	.word	0x41610BC1			# dmt $1	\n"
+	"	ehb							\n"
+	"	move	%0, $1						\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_emt(void)
+{
+	__asm__ __volatile__(
+	"	.set	noreorder					\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41600be1			# emt		\n"
+	"	ehb							\n"
+	"	.set	mips0						\n"
+	"	.set	reorder");
+}
+
+/* enable multi-threaded execution if previous suggested it should be.
+   EMT_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+	if ((previous & EMT_ENABLE))
+		__raw_emt();
+}
+
+static inline void ehb(void)
+{
+	__asm__ __volatile__(
+	"	.set	mips32r2				\n"
+	"	ehb						\n"
+	"	.set	mips0					\n");
+}
+
+#define mftc0(rt,sel)							\
+({									\
+	 unsigned long  __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	# mftc0	$1, $" #rt ", " #sel "			\n"	\
+	"	.word	0x41000800 | (" #rt " << 16) | " #sel "	\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftgpr(rt)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	# mftgpr $1," #rt "				\n"	\
+	"	.word	0x41000820 | (" #rt " << 16)		\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftr(rt, u, sel)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	mftr	%0, " #rt ", " #u ", " #sel "		\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mttgpr(rd,v)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mttgpr $1, " #rd "				\n"	\
+	"	.word	0x41810020 | (" #rd " << 11)		\n"	\
+	"	.set	pop					\n"	\
+	: : "r" (v));							\
+} while (0)
+
+#define mttc0(rd, sel, v)							\
+({									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mttc0 %0," #rd ", " #sel "			\n"	\
+	"	.word	0x41810000 | (" #rd " << 11) | " #sel "	\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (v));							\
+})
+
+
+#define mttr(rd, u, sel, v)						\
+({									\
+	__asm__ __volatile__(						\
+	"mttr	%0," #rd ", " #u ", " #sel				\
+	: : "r" (v));							\
+})
+
+
+#define settc(tc)							\
+do {									\
+	write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+	ehb();								\
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol()	mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0()		mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
+#define read_vpe_c0_count()		mftc0(9, 0)
+#define write_vpe_c0_count(val)		mttc0(9, 0, val)
+#define read_vpe_c0_status()		mftc0(12, 0)
+#define write_vpe_c0_status(val)	mttc0(12, 0, val)
+#define read_vpe_c0_cause()		mftc0(13, 0)
+#define write_vpe_c0_cause(val)		mttc0(13, 0, val)
+#define read_vpe_c0_config()		mftc0(16, 0)
+#define write_vpe_c0_config(val)	mttc0(16, 0, val)
+#define read_vpe_c0_config1()		mftc0(16, 1)
+#define write_vpe_c0_config1(val)	mttc0(16, 1, val)
+#define read_vpe_c0_config7()		mftc0(16, 7)
+#define write_vpe_c0_config7(val)	mttc0(16, 7, val)
+#define read_vpe_c0_ebase()		mftc0(15, 1)
+#define write_vpe_c0_ebase(val)		mttc0(15, 1, val)
+#define write_vpe_c0_compare(val)	mttc0(11, 0, val)
+#define read_vpe_c0_badvaddr()		mftc0(8, 0)
+#define read_vpe_c0_epc()		mftc0(14, 0)
+#define write_vpe_c0_epc(val)		mttc0(14, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus()		mftc0(2, 1)
+#define write_tc_c0_tcstatus(val)	mttc0(2, 1, val)
+#define read_tc_c0_tcbind()		mftc0(2, 2)
+#define write_tc_c0_tcbind(val)		mttc0(2, 2, val)
+#define read_tc_c0_tcrestart()		mftc0(2, 3)
+#define write_tc_c0_tcrestart(val)	mttc0(2, 3, val)
+#define read_tc_c0_tchalt()		mftc0(2, 4)
+#define write_tc_c0_tchalt(val)		mttc0(2, 4, val)
+#define read_tc_c0_tccontext()		mftc0(2, 5)
+#define write_tc_c0_tccontext(val)	mttc0(2, 5, val)
+
+/* GPR */
+#define read_tc_gpr_sp()		mftgpr(29)
+#define write_tc_gpr_sp(val)		mttgpr(29, val)
+#define read_tc_gpr_gp()		mftgpr(28)
+#define write_tc_gpr_gp(val)		mttgpr(28, val)
+
+__BUILD_SET_C0(mvpcontrol)
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
new file mode 100644
index 0000000..146d41b
--- /dev/null
+++ b/arch/mips/include/asm/mipsprom.h
@@ -0,0 +1,76 @@
+#ifndef __ASM_MIPS_PROM_H
+#define __ASM_MIPS_PROM_H
+
+#define PROM_RESET		0
+#define PROM_EXEC		1
+#define PROM_RESTART		2
+#define PROM_REINIT		3
+#define PROM_REBOOT		4
+#define PROM_AUTOBOOT		5
+#define PROM_OPEN		6
+#define PROM_READ		7
+#define PROM_WRITE		8
+#define PROM_IOCTL		9
+#define PROM_CLOSE		10
+#define PROM_GETCHAR		11
+#define PROM_PUTCHAR		12
+#define PROM_SHOWCHAR		13	/* XXX */
+#define PROM_GETS		14	/* XXX */
+#define PROM_PUTS		15	/* XXX */
+#define PROM_PRINTF		16	/* XXX */
+
+/* What are these for? */
+#define PROM_INITPROTO		17	/* XXX */
+#define PROM_PROTOENABLE	18	/* XXX */
+#define PROM_PROTODISABLE	19	/* XXX */
+#define PROM_GETPKT		20	/* XXX */
+#define PROM_PUTPKT		21	/* XXX */
+
+/* More PROM shit.  Probably has to do with VME RMW cycles??? */
+#define PROM_ORW_RMW		22	/* XXX */
+#define PROM_ORH_RMW		23	/* XXX */
+#define PROM_ORB_RMW		24	/* XXX */
+#define PROM_ANDW_RMW		25	/* XXX */
+#define PROM_ANDH_RMW		26	/* XXX */
+#define PROM_ANDB_RMW		27	/* XXX */
+
+/* Cache handling stuff */
+#define PROM_FLUSHCACHE		28	/* XXX */
+#define PROM_CLEARCACHE		29	/* XXX */
+
+/* Libc alike stuff */
+#define PROM_SETJMP		30	/* XXX */
+#define PROM_LONGJMP		31	/* XXX */
+#define PROM_BEVUTLB		32	/* XXX */
+#define PROM_GETENV		33	/* XXX */
+#define PROM_SETENV		34	/* XXX */
+#define PROM_ATOB		35	/* XXX */
+#define PROM_STRCMP		36	/* XXX */
+#define PROM_STRLEN		37	/* XXX */
+#define PROM_STRCPY		38	/* XXX */
+#define PROM_STRCAT		39	/* XXX */
+
+/* Misc stuff */
+#define PROM_PARSER		40	/* XXX */
+#define PROM_RANGE		41	/* XXX */
+#define PROM_ARGVIZE		42	/* XXX */
+#define PROM_HELP		43	/* XXX */
+
+/* Entry points for some PROM commands */
+#define PROM_DUMPCMD		44	/* XXX */
+#define PROM_SETENVCMD		45	/* XXX */
+#define PROM_UNSETENVCMD	46	/* XXX */
+#define PROM_PRINTENVCMD	47	/* XXX */
+#define PROM_BEVEXCEPT		48	/* XXX */
+#define PROM_ENABLECMD		49	/* XXX */
+#define PROM_DISABLECMD		50	/* XXX */
+
+#define PROM_CLEARNOFAULT	51	/* XXX */
+#define PROM_NOTIMPLEMENT	52	/* XXX */
+
+#define PROM_NV_GET		53	/* XXX */
+#define PROM_NV_SET		54	/* XXX */
+
+extern char *prom_getenv(char *);
+
+#endif /* __ASM_MIPS_PROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
new file mode 100644
index 0000000..9798660
--- /dev/null
+++ b/arch/mips/include/asm/mipsregs.h
@@ -0,0 +1,1526 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#include <linux/linkage.h>
+#include <asm/hazards.h>
+#include <asm/war.h>
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ *  Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
+
+/*
+ * R4640/R4650 cp0 register names.  These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux.  A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0  $26
+#define CP0_S1_DERRADDR1  $27
+#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL	  $12	/* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP	  $12	/* MIPSR2 */
+
+/*
+ *  TX39 Series
+ */
+#define CP0_TX39_CACHE	$7
+
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION   $0
+#define CP1_STATUS     $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
+#define FPU_CSR_COND    0x00800000      /* $fcc0 */
+#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
+#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
+#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
+#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
+#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
+#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
+#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
+#define FPU_CSR_COND7   0x80000000      /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X   0x0003f000
+#define FPU_CSR_UNI_X   0x00020000
+#define FPU_CSR_INV_X   0x00010000
+#define FPU_CSR_DIV_X   0x00008000
+#define FPU_CSR_OVF_X   0x00004000
+#define FPU_CSR_UDF_X   0x00002000
+#define FPU_CSR_INE_X   0x00001000
+
+#define FPU_CSR_ALL_E   0x00000f80
+#define FPU_CSR_INV_E   0x00000800
+#define FPU_CSR_DIV_E   0x00000400
+#define FPU_CSR_OVF_E   0x00000200
+#define FPU_CSR_UDF_E   0x00000100
+#define FPU_CSR_INE_E   0x00000080
+
+#define FPU_CSR_ALL_S   0x0000007c
+#define FPU_CSR_INV_S   0x00000040
+#define FPU_CSR_DIV_S   0x00000020
+#define FPU_CSR_OVF_S   0x00000010
+#define FPU_CSR_UDF_S   0x00000008
+#define FPU_CSR_INE_S   0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN      0x0     /* nearest */
+#define FPU_CSR_RZ      0x1     /* towards zero */
+#define FPU_CSR_RU      0x2     /* towards +Infinity */
+#define FPU_CSR_RD      0x3     /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#ifdef CONFIG_CPU_VR41XX
+
+/* Why doesn't stupidity hurt ... */
+
+#define PM_1K		0x00000000
+#define PM_4K		0x00001800
+#define PM_16K		0x00007800
+#define PM_64K		0x0001f800
+#define PM_256K		0x0007f800
+
+#else
+
+#define PM_4K		0x00000000
+#define PM_16K		0x00006000
+#define PM_64K		0x0001e000
+#define PM_256K		0x0007e000
+#define PM_1M		0x001fe000
+#define PM_4M		0x007fe000
+#define PM_16M		0x01ffe000
+#define PM_64M		0x07ffe000
+#define PM_256M		0x1fffe000
+
+#endif
+
+/*
+ * Default page size for a given kernel configuration
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define PM_DEFAULT_MASK	PM_64K
+#else
+#error Bad page size configuration!
+#endif
+
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K		12
+#define PL_16K		14
+#define PL_64K		16
+#define PL_256K		18
+#define PL_1M		20
+#define PL_4M		22
+#define PL_16M		24
+#define PL_64M		26
+#define PL_256M		28
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0          (_ULCAST_(1) <<  8)
+#define IE_SW1          (_ULCAST_(1) <<  9)
+#define IE_IRQ0         (_ULCAST_(1) << 10)
+#define IE_IRQ1         (_ULCAST_(1) << 11)
+#define IE_IRQ2         (_ULCAST_(1) << 12)
+#define IE_IRQ3         (_ULCAST_(1) << 13)
+#define IE_IRQ4         (_ULCAST_(1) << 14)
+#define IE_IRQ5         (_ULCAST_(1) << 15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0           (_ULCAST_(1) <<  8)
+#define C_SW1           (_ULCAST_(1) <<  9)
+#define C_IRQ0          (_ULCAST_(1) << 10)
+#define C_IRQ1          (_ULCAST_(1) << 11)
+#define C_IRQ2          (_ULCAST_(1) << 12)
+#define C_IRQ3          (_ULCAST_(1) << 13)
+#define C_IRQ4          (_ULCAST_(1) << 14)
+#define C_IRQ5          (_ULCAST_(1) << 15)
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE			0x00000001
+#define ST0_EXL			0x00000002
+#define ST0_ERL			0x00000004
+#define ST0_KSU			0x00000018
+#  define KSU_USER		0x00000010
+#  define KSU_SUPERVISOR	0x00000008
+#  define KSU_KERNEL		0x00000000
+#define ST0_UX			0x00000020
+#define ST0_SX			0x00000040
+#define ST0_KX 			0x00000080
+#define ST0_DE			0x00010000
+#define ST0_CE			0x00020000
+
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace.  This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO			0x08000000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC                 0x00000001
+#define ST0_KUC			0x00000002
+#define ST0_IEP			0x00000004
+#define ST0_KUP			0x00000008
+#define ST0_IEO			0x00000010
+#define ST0_KUO			0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC			0x00010000
+#define ST0_SWC			0x00020000
+#define ST0_CM			0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM			(_ULCAST_(1) <<  4)
+#define ST0_IL			(_ULCAST_(1) << 23)
+#define ST0_DL			(_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX			0x01000000
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT	19
+#define TX39_CONF_ICS_MASK	0x00380000
+#define TX39_CONF_ICS_1KB 	0x00000000
+#define TX39_CONF_ICS_2KB 	0x00080000
+#define TX39_CONF_ICS_4KB 	0x00100000
+#define TX39_CONF_ICS_8KB 	0x00180000
+#define TX39_CONF_ICS_16KB 	0x00200000
+
+#define TX39_CONF_DCS_SHIFT	16
+#define TX39_CONF_DCS_MASK	0x00070000
+#define TX39_CONF_DCS_1KB 	0x00000000
+#define TX39_CONF_DCS_2KB 	0x00010000
+#define TX39_CONF_DCS_4KB 	0x00020000
+#define TX39_CONF_DCS_8KB 	0x00030000
+#define TX39_CONF_DCS_16KB 	0x00040000
+
+#define TX39_CONF_CWFON 	0x00004000
+#define TX39_CONF_WBON  	0x00002000
+#define TX39_CONF_RF_SHIFT	10
+#define TX39_CONF_RF_MASK	0x00000c00
+#define TX39_CONF_DOZE		0x00000200
+#define TX39_CONF_HALT		0x00000100
+#define TX39_CONF_LOCK		0x00000080
+#define TX39_CONF_ICE		0x00000020
+#define TX39_CONF_DCE		0x00000010
+#define TX39_CONF_IRSIZE_SHIFT	2
+#define TX39_CONF_IRSIZE_MASK	0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT	0
+#define TX39_CONF_DRSIZE_MASK	0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM			0x0000ff00
+#define  STATUSB_IP0		8
+#define  STATUSF_IP0		(_ULCAST_(1) <<  8)
+#define  STATUSB_IP1		9
+#define  STATUSF_IP1		(_ULCAST_(1) <<  9)
+#define  STATUSB_IP2		10
+#define  STATUSF_IP2		(_ULCAST_(1) << 10)
+#define  STATUSB_IP3		11
+#define  STATUSF_IP3		(_ULCAST_(1) << 11)
+#define  STATUSB_IP4		12
+#define  STATUSF_IP4		(_ULCAST_(1) << 12)
+#define  STATUSB_IP5		13
+#define  STATUSF_IP5		(_ULCAST_(1) << 13)
+#define  STATUSB_IP6		14
+#define  STATUSF_IP6		(_ULCAST_(1) << 14)
+#define  STATUSB_IP7		15
+#define  STATUSF_IP7		(_ULCAST_(1) << 15)
+#define  STATUSB_IP8		0
+#define  STATUSF_IP8		(_ULCAST_(1) <<  0)
+#define  STATUSB_IP9		1
+#define  STATUSF_IP9		(_ULCAST_(1) <<  1)
+#define  STATUSB_IP10		2
+#define  STATUSF_IP10		(_ULCAST_(1) <<  2)
+#define  STATUSB_IP11		3
+#define  STATUSF_IP11		(_ULCAST_(1) <<  3)
+#define  STATUSB_IP12		4
+#define  STATUSF_IP12		(_ULCAST_(1) <<  4)
+#define  STATUSB_IP13		5
+#define  STATUSF_IP13		(_ULCAST_(1) <<  5)
+#define  STATUSB_IP14		6
+#define  STATUSF_IP14		(_ULCAST_(1) <<  6)
+#define  STATUSB_IP15		7
+#define  STATUSF_IP15		(_ULCAST_(1) <<  7)
+#define ST0_CH			0x00040000
+#define ST0_SR			0x00100000
+#define ST0_TS			0x00200000
+#define ST0_BEV			0x00400000
+#define ST0_RE			0x02000000
+#define ST0_FR			0x04000000
+#define ST0_CU			0xf0000000
+#define ST0_CU0			0x10000000
+#define ST0_CU1			0x20000000
+#define ST0_CU2			0x40000000
+#define ST0_CU3			0x80000000
+#define ST0_XX			0x80000000	/* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define  CAUSEB_EXCCODE		2
+#define  CAUSEF_EXCCODE		(_ULCAST_(31)  <<  2)
+#define  CAUSEB_IP		8
+#define  CAUSEF_IP		(_ULCAST_(255) <<  8)
+#define  CAUSEB_IP0		8
+#define  CAUSEF_IP0		(_ULCAST_(1)   <<  8)
+#define  CAUSEB_IP1		9
+#define  CAUSEF_IP1		(_ULCAST_(1)   <<  9)
+#define  CAUSEB_IP2		10
+#define  CAUSEF_IP2		(_ULCAST_(1)   << 10)
+#define  CAUSEB_IP3		11
+#define  CAUSEF_IP3		(_ULCAST_(1)   << 11)
+#define  CAUSEB_IP4		12
+#define  CAUSEF_IP4		(_ULCAST_(1)   << 12)
+#define  CAUSEB_IP5		13
+#define  CAUSEF_IP5		(_ULCAST_(1)   << 13)
+#define  CAUSEB_IP6		14
+#define  CAUSEF_IP6		(_ULCAST_(1)   << 14)
+#define  CAUSEB_IP7		15
+#define  CAUSEF_IP7		(_ULCAST_(1)   << 15)
+#define  CAUSEB_IV		23
+#define  CAUSEF_IV		(_ULCAST_(1)   << 23)
+#define  CAUSEB_CE		28
+#define  CAUSEF_CE		(_ULCAST_(3)   << 28)
+#define  CAUSEB_BD		31
+#define  CAUSEF_BD		(_ULCAST_(1)   << 31)
+
+/*
+ * Bits in the coprocessor 0 config register.
+ */
+/* Generic bits.  */
+#define CONF_CM_CACHABLE_NO_WA		0
+#define CONF_CM_CACHABLE_WA		1
+#define CONF_CM_UNCACHED		2
+#define CONF_CM_CACHABLE_NONCOHERENT	3
+#define CONF_CM_CACHABLE_CE		4
+#define CONF_CM_CACHABLE_COW		5
+#define CONF_CM_CACHABLE_CUW		6
+#define CONF_CM_CACHABLE_ACCELERATED	7
+#define CONF_CM_CMASK			7
+#define CONF_BE			(_ULCAST_(1) << 15)
+
+/* Bits common to various processors.  */
+#define CONF_CU			(_ULCAST_(1) <<  3)
+#define CONF_DB			(_ULCAST_(1) <<  4)
+#define CONF_IB			(_ULCAST_(1) <<  5)
+#define CONF_DC			(_ULCAST_(7) <<  6)
+#define CONF_IC			(_ULCAST_(7) <<  9)
+#define CONF_EB			(_ULCAST_(1) << 13)
+#define CONF_EM			(_ULCAST_(1) << 14)
+#define CONF_SM			(_ULCAST_(1) << 16)
+#define CONF_SC			(_ULCAST_(1) << 17)
+#define CONF_EW			(_ULCAST_(3) << 18)
+#define CONF_EP			(_ULCAST_(15)<< 24)
+#define CONF_EC			(_ULCAST_(7) << 28)
+#define CONF_CM			(_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0.  */
+#define R4K_CONF_SW		(_ULCAST_(1) << 20)
+#define R4K_CONF_SS		(_ULCAST_(1) << 21)
+#define R4K_CONF_SB		(_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000.  */
+#define R5K_CONF_SE		(_ULCAST_(1) << 12)
+#define R5K_CONF_SS		(_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000.  */
+#define RM7K_CONF_SE		(_ULCAST_(1) <<  3)
+#define RM7K_CONF_TE		(_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK		(_ULCAST_(1) << 16)
+#define RM7K_CONF_TC		(_ULCAST_(1) << 17)
+#define RM7K_CONF_SI		(_ULCAST_(3) << 20)
+#define RM7K_CONF_SC		(_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000.  */
+#define R10K_CONF_DN		(_ULCAST_(3) <<  3)
+#define R10K_CONF_CT		(_ULCAST_(1) <<  5)
+#define R10K_CONF_PE		(_ULCAST_(1) <<  6)
+#define R10K_CONF_PM		(_ULCAST_(3) <<  7)
+#define R10K_CONF_EC		(_ULCAST_(15)<<  9)
+#define R10K_CONF_SB		(_ULCAST_(1) << 13)
+#define R10K_CONF_SK		(_ULCAST_(1) << 14)
+#define R10K_CONF_SS		(_ULCAST_(7) << 16)
+#define R10K_CONF_SC		(_ULCAST_(7) << 19)
+#define R10K_CONF_DC		(_ULCAST_(7) << 26)
+#define R10K_CONF_IC		(_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx.  */
+#define VR41_CONF_CS		(_ULCAST_(1) << 12)
+#define VR41_CONF_P4K		(_ULCAST_(1) << 13)
+#define VR41_CONF_BP		(_ULCAST_(1) << 16)
+#define VR41_CONF_M16		(_ULCAST_(1) << 20)
+#define VR41_CONF_AD		(_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx.  */
+#define R30XX_CONF_FDM		(_ULCAST_(1) << 19)
+#define R30XX_CONF_REV		(_ULCAST_(1) << 22)
+#define R30XX_CONF_AC		(_ULCAST_(1) << 23)
+#define R30XX_CONF_RF		(_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT		(_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT	(_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR		(_ULCAST_(1) << 29)
+#define R30XX_CONF_SB		(_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK		(_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49.  */
+#define TX49_CONF_DC		(_ULCAST_(1) << 16)
+#define TX49_CONF_IC		(_ULCAST_(1) << 17)  /* conflict with CONF_SC */
+#define TX49_CONF_HALT		(_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON		(_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA.  */
+#define MIPS_CONF_MT		(_ULCAST_(7) <<  7)
+#define MIPS_CONF_AR		(_ULCAST_(7) << 10)
+#define MIPS_CONF_AT		(_ULCAST_(3) << 13)
+#define MIPS_CONF_M		(_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP		(_ULCAST_(1) <<  0)
+#define MIPS_CONF1_EP		(_ULCAST_(1) <<  1)
+#define MIPS_CONF1_CA		(_ULCAST_(1) <<  2)
+#define MIPS_CONF1_WR		(_ULCAST_(1) <<  3)
+#define MIPS_CONF1_PC		(_ULCAST_(1) <<  4)
+#define MIPS_CONF1_MD		(_ULCAST_(1) <<  5)
+#define MIPS_CONF1_C2		(_ULCAST_(1) <<  6)
+#define MIPS_CONF1_DA		(_ULCAST_(7) <<  7)
+#define MIPS_CONF1_DL		(_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS		(_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA		(_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL		(_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS		(_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS		(_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA		(_ULCAST_(15)<<  0)
+#define MIPS_CONF2_SL		(_ULCAST_(15)<<  4)
+#define MIPS_CONF2_SS		(_ULCAST_(15)<<  8)
+#define MIPS_CONF2_SU		(_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA		(_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL		(_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS		(_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU		(_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL		(_ULCAST_(1) <<  0)
+#define MIPS_CONF3_SM		(_ULCAST_(1) <<  1)
+#define MIPS_CONF3_MT		(_ULCAST_(1) <<  2)
+#define MIPS_CONF3_SP		(_ULCAST_(1) <<  4)
+#define MIPS_CONF3_VINT		(_ULCAST_(1) <<  5)
+#define MIPS_CONF3_VEIC		(_ULCAST_(1) <<  6)
+#define MIPS_CONF3_LPA		(_ULCAST_(1) <<  7)
+#define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
+
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S		(_ULCAST_(1) << 16)
+#define MIPS_FPIR_D		(_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS		(_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D		(_ULCAST_(1) << 19)
+#define MIPS_FPIR_W		(_ULCAST_(1) << 20)
+#define MIPS_FPIR_L		(_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64		(_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters.  These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfpc\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntr(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtpc\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+#define read_r10k_perf_event(counter)				\
+({								\
+	unsigned int __res;					\
+	__asm__ __volatile__(					\
+	"mfps\t%0, %1"						\
+        : "=r" (__res)						\
+	: "i" (counter));					\
+								\
+        __res;							\
+})
+
+#define write_r10k_perf_cntl(counter,val)                       \
+do {								\
+	__asm__ __volatile__(					\
+	"mtps\t%0, %1"						\
+	:							\
+	: "r" (val), "i" (counter));				\
+} while (0)
+
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel)				\
+({ int __res;								\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mfc0\t%0, " #source "\n\t"			\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0\n\t"				\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __read_64bit_c0_register(source, sel)				\
+({ unsigned long long __res;						\
+	if (sizeof(unsigned long) == 4)					\
+		__res = __read_64bit_c0_split(source, sel);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmfc0\t%0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define __write_32bit_c0_register(register, sel, value)			\
+do {									\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mtc0\t%z0, " #register "\n\t"			\
+			: : "Jr" ((unsigned int)(value)));		\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" ((unsigned int)(value)));		\
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_64bit_c0_split(register, sel, value);		\
+	else if (sel == 0)						\
+		__asm__ __volatile__(					\
+			".set\tmips3\n\t"				\
+			"dmtc0\t%z0, " #register "\n\t"			\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmtc0\t%z0, " #register ", " #sel "\n\t"	\
+			".set\tmips0"					\
+			: : "Jr" (value));				\
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel)				\
+	((sizeof(unsigned long) == 4) ?					\
+	(unsigned long) __read_32bit_c0_register(reg, sel) :		\
+	(unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val)			\
+do {									\
+	if (sizeof(unsigned long) == 4)					\
+		__write_32bit_c0_register(reg, sel, val);		\
+	else								\
+		__write_64bit_c0_register(reg, sel, val);		\
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source)				\
+({ int __res;								\
+	__asm__ __volatile__(						\
+		"cfc0\t%0, " #source "\n\t"				\
+		: "=r" (__res));					\
+	__res;								\
+})
+
+#define __write_32bit_c0_ctrl_register(register, value)			\
+do {									\
+	__asm__ __volatile__(						\
+		"ctc0\t%z0, " #register "\n\t"				\
+		: : "Jr" ((unsigned int)(value)));			\
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel.  That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel)				\
+({									\
+	unsigned long long __val;					\
+	unsigned long __flags;						\
+									\
+	local_irq_save(__flags);					\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source "\n\t"			\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__val));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
+			"dsll\t%L0, %M0, 32\n\t"			\
+			"dsrl\t%M0, %M0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			".set\tmips0"					\
+			: "=r" (__val));				\
+	local_irq_restore(__flags);					\
+									\
+	__val;								\
+})
+
+#define __write_64bit_c0_split(source, sel, val)			\
+do {									\
+	unsigned long __flags;						\
+									\
+	local_irq_save(__flags);					\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source "\n\t"			\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
+			".set\tmips0"					\
+			: : "r" (val));					\
+	local_irq_restore(__flags);					\
+} while (0)
+
+#define read_c0_index()		__read_32bit_c0_register($0, 0)
+#define write_c0_index(val)	__write_32bit_c0_register($0, 0, val)
+
+#define read_c0_random()	__read_32bit_c0_register($1, 0)
+#define write_c0_random(val)	__write_32bit_c0_register($1, 0, val)
+
+#define read_c0_entrylo0()	__read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val)	__write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1()	__read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val)	__write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf()		__read_32bit_c0_register($3, 0)
+#define write_c0_conf(val)	__write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context()	__read_ulong_c0_register($4, 0)
+#define write_c0_context(val)	__write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal()	__read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val)	__write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired()		__read_32bit_c0_register($6, 0)
+#define write_c0_wired(val)	__write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info()		__read_32bit_c0_register($7, 0)
+
+#define read_c0_cache()		__read_32bit_c0_register($7, 0)	/* TX39xx */
+#define write_c0_cache(val)	__write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr()	__read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val)	__write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count()		__read_32bit_c0_register($9, 0)
+#define write_c0_count(val)	__write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2()	__read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val)	__write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3()	__read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val)	__write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi()	__read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val)	__write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare()	__read_32bit_c0_register($11, 0)
+#define write_c0_compare(val)	__write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2()	__read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val)	__write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3()	__read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status()	__read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val)						\
+do {									\
+	__write_32bit_c0_register($12, 0, val);				\
+	__ehb();							\
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause()		__read_32bit_c0_register($13, 0)
+#define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc()		__read_ulong_c0_register($14, 0)
+#define write_c0_epc(val)	__write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid()		__read_32bit_c0_register($15, 0)
+
+#define read_c0_config()	__read_32bit_c0_register($16, 0)
+#define read_c0_config1()	__read_32bit_c0_register($16, 1)
+#define read_c0_config2()	__read_32bit_c0_register($16, 2)
+#define read_c0_config3()	__read_32bit_c0_register($16, 3)
+#define read_c0_config4()	__read_32bit_c0_register($16, 4)
+#define read_c0_config5()	__read_32bit_c0_register($16, 5)
+#define read_c0_config6()	__read_32bit_c0_register($16, 6)
+#define read_c0_config7()	__read_32bit_c0_register($16, 7)
+#define write_c0_config(val)	__write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val)	__write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val)	__write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val)	__write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val)	__write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val)	__write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val)	__write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val)	__write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register.  There may be upto 8 of them.
+ */
+#define read_c0_watchlo0()	__read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1()	__read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2()	__read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3()	__read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4()	__read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5()	__read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6()	__read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7()	__read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val)	__write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val)	__write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val)	__write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val)	__write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val)	__write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val)	__write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val)	__write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val)	__write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register.  There may be upto 8 of them.
+ */
+#define read_c0_watchhi0()	__read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1()	__read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2()	__read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3()	__read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4()	__read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5()	__read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6()	__read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7()	__read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val)	__write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val)	__write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val)	__write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val)	__write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val)	__write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val)	__write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val)	__write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val)	__write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext()	__read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val)	__write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol()	__read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask()	__read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val)	__write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol()	__read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag()		__read_32bit_c0_register($22, 0)
+#define write_c0_diag(val)	__write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1()		__read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val)	__write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2()		__read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val)	__write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3()		__read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val)	__write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4()		__read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val)	__write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5()		__read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val)	__write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug()		__read_32bit_c0_register($23, 0)
+#define write_c0_debug(val)	__write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc()		__read_ulong_c0_register($24, 0)
+#define write_c0_depc(val)	__write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0()	__read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount()	__read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val)	__write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc()		__read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0()	__read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val)	__write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr()	__read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1()	__read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val)	__write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo()		__read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val)	__write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo()	__read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val)	__write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi()		__read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val)	__write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc()	__read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val)	__write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena()	__read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val)	__write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl()	__read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val)	__write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl()	__read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val)	__write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap()	__read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val)	__write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase()		__read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val)	__write_32bit_c0_register($15, 1, val)
+
+/*
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source)                         \
+({ int __res;                                                   \
+	__asm__ __volatile__(                                   \
+	".set\tpush\n\t"					\
+	".set\treorder\n\t"					\
+        "cfc1\t%0,"STR(source)"\n\t"                            \
+	".set\tpop"						\
+        : "=r" (__res));                                        \
+        __res;})
+
+#define rddsp(mask)							\
+({									\
+	unsigned int __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push				\n"		\
+	"	.set	noat				\n"		\
+	"	# rddsp $1, %x1				\n"		\
+	"	.word	0x7c000cb8 | (%x1 << 16)	\n"		\
+	"	move	%0, $1				\n"		\
+	"	.set	pop				\n"		\
+	: "=r" (__res)							\
+	: "i" (mask));							\
+	__res;								\
+})
+
+#define wrdsp(val, mask)						\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# wrdsp $1, %x1					\n"	\
+	"	.word	0x7c2004f8 | (%x1 << 11)		\n"	\
+	"	.set	pop					\n"	\
+        :								\
+	: "r" (val), "i" (mask));					\
+} while (0)
+
+#if 0	/* Need DSP ASE capable assembler ... */
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#define mfhi0()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac0		\n"			\
+	"	.word	0x00000810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi1()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac1		\n"			\
+	"	.word	0x00200810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi2()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac2		\n"			\
+	"	.word	0x00400810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mfhi3()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mfhi	%0, $ac3		\n"			\
+	"	.word	0x00600810		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo0()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac0		\n"			\
+	"	.word	0x00000812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo1()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac1		\n"			\
+	"	.word	0x00200812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo2()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac2		\n"			\
+	"	.word	0x00400812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mflo3()								\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push			\n"			\
+	"	.set	noat			\n"			\
+	"	# mflo	%0, $ac3		\n"			\
+	"	.word	0x00600812		\n"			\
+	"	move	%0, $1			\n"			\
+	"	.set	pop			\n"			\
+	: "=r" (__treg));						\
+	__treg;								\
+})
+
+#define mthi0(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac0				\n"	\
+	"	.word	0x00200011				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi1(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac1				\n"	\
+	"	.word	0x00200811				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi2(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac2				\n"	\
+	"	.word	0x00201011				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mthi3(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthi	$1, $ac3				\n"	\
+	"	.word	0x00201811				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo0(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac0				\n"	\
+	"	.word	0x00200013				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo1(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac1				\n"	\
+	"	.word	0x00200813				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo2(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac2				\n"	\
+	"	.word	0x00201013				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#define mtlo3(x)							\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mtlo	$1, $ac3				\n"	\
+	"	.word	0x00201813				\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (x));							\
+} while (0)
+
+#endif
+
+/*
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbp\n\t"
+		".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push					\n"
+	"	.set	noreorder				\n"
+	"	.set	noat					\n"
+	"	.set	mips32r2				\n"
+	"	.word	0x41610001		# dvpe $1	\n"
+	"	move	%0, $1					\n"
+	"	ehb						\n"
+	"	.set	pop					\n"
+	: "=r" (res));
+
+	instruction_hazard();
+#endif
+
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbr\n\t"
+		".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+	if ((res & _ULCAST_(1)))
+		__asm__ __volatile__(
+		"	.set	push				\n"
+		"	.set	noreorder			\n"
+		"	.set	noat				\n"
+		"	.set	mips32r2			\n"
+		"	.word	0x41600021	# evpe		\n"
+		"	ehb					\n"
+		"	.set	pop				\n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwi\n\t"
+		".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+	__asm__ __volatile__(
+		".set noreorder\n\t"
+		"tlbwr\n\t"
+		".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}
+
+#else /* SMTC versions that manage MT scheduling */
+
+#include <linux/irqflags.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	mips32r2					\n"
+	"	.set	noat						\n"
+	"	.word	0x41610BC1			# dmt $1	\n"
+	"	ehb							\n"
+	"	move	%0, $1						\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+#define __VPECONTROL_TE_SHIFT	15
+#define __VPECONTROL_TE		(1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE		__VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+	if ((previous & __EMT_ENABLE))
+		__asm__ __volatile__(
+		"	.set	mips32r2				\n"
+		"	.word	0x41600be1		# emt		\n"
+		"	ehb						\n"
+		"	.set	mips0					\n");
+}
+
+static inline void __ehb(void)
+{
+	__asm__ __volatile__(
+	"	.set	mips32r2					\n"
+	"	ehb							\n"		"	.set	mips0						\n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned long flags;					\
+								\
+	local_irq_save(flags);					\
+								\
+	omt = __dmt();						\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
+								\
+	return res;						\
+}
+#endif
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
new file mode 100644
index 0000000..e4d6f1f
--- /dev/null
+++ b/arch/mips/include/asm/mman.h
@@ -0,0 +1,77 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together.  The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ.  The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+#define PROT_NONE	0x00		/* page can not be accessed */
+#define PROT_READ	0x01		/* page can be read */
+#define PROT_WRITE	0x02		/* page can be written */
+#define PROT_EXEC	0x04		/* page can be executed */
+/*			0x08		   reserved for PROT_EXEC_NOFLUSH */
+#define PROT_SEM	0x10		/* page may be used for atomic ops */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED	0x001		/* Share changes */
+#define MAP_PRIVATE	0x002		/* Changes are private */
+#define MAP_TYPE	0x00f		/* Mask for type of mapping */
+#define MAP_FIXED	0x010		/* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME	0x020		/* Assign page to file */
+#define MAP_AUTOGROW	0x040		/* File may grow by writing */
+#define MAP_LOCAL	0x080		/* Copy on fork/sproc */
+#define MAP_AUTORSRV	0x100		/* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE	0x0400		/* don't check for reservations */
+#define MAP_ANONYMOUS	0x0800		/* don't use a file */
+#define MAP_GROWSDOWN	0x1000		/* stack-like segment */
+#define MAP_DENYWRITE	0x2000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x4000		/* mark it as an executable */
+#define MAP_LOCKED	0x8000		/* pages are locked */
+#define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x20000		/* do not block on IO */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC	0x0001		/* sync memory asynchronously */
+#define MS_INVALIDATE	0x0002		/* invalidate mappings & caches */
+#define MS_SYNC		0x0004		/* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h
new file mode 100644
index 0000000..4063edd
--- /dev/null
+++ b/arch/mips/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif /* __ASM_MMU_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
new file mode 100644
index 0000000..d7f3eb0
--- /dev/null
+++ b/arch/mips/include/asm/mmu_context.h
@@ -0,0 +1,297 @@
+/*
+ * Switch a MMU context.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#endif /* SMTC */
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long pgd_current[];
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
+	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
+
+#ifdef CONFIG_32BIT
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 25);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+#ifdef CONFIG_64BIT
+#define TLBMISS_HANDLER_SETUP()						\
+	write_c0_context((unsigned long) smp_processor_id() << 26);	\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define ASID_INC	0x40
+#define ASID_MASK	0xfc0
+
+#elif defined(CONFIG_CPU_R8000)
+
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xfff
+
+/* SMTC/34K debug hack - but maybe we'll keep it */
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC	0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK	(smtc_asid_mask)
+#define	HW_ASID_MASK	0xff
+/* End SMTC/34K debug hack */
+#else /* FIXME: not correct for R6000 */
+
+#define ASID_INC	0x1
+#define ASID_MASK	0xff
+
+#endif
+
+#define cpu_context(cpu, mm)	((mm)->context[cpu])
+#define cpu_asid(cpu, mm)	(cpu_context((cpu), (mm)) & ASID_MASK)
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ *  All unused by hardware upper bits will be considered
+ *  as a software asid extension.
+ */
+#define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
+#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+
+#ifndef CONFIG_MIPS_MT_SMTC
+/* Normal, classic MIPS get_new_mmu_context */
+static inline void
+get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	if (! ((asid += ASID_INC) & ASID_MASK) ) {
+		if (cpu_has_vtag_icache)
+			flush_icache_all();
+		local_flush_tlb_all();	/* start new asid cycle */
+		if (!asid)		/* fix version if needed */
+			asid = ASID_FIRST_VERSION;
+	}
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+#else /* CONFIG_MIPS_MT_SMTC */
+
+#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu))
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for_each_online_cpu(i)
+		cpu_context(i, mm) = 0;
+
+	return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+	local_irq_save(flags);
+	mtflags = dvpe();
+#else /* Not SMTC */
+	local_irq_save(flags);
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/* Check if our ASID is of an older version and thus invalid */
+	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
+		get_new_mmu_context(next, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * If the EntryHi ASID being replaced happens to be
+	 * the value flagged at ASID recycling time as having
+	 * an extended life, clear the bit showing it being
+	 * in use by this "CPU", and if that's the last bit,
+	 * free up the ASID value for use and flush any old
+	 * instances of it from the TLB.
+	 */
+	oldasid = (read_c0_entryhi() & ASID_MASK);
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		if(smtc_live_asid[mytlb][oldasid] == 0)
+			smtc_flush_tlb_asid(oldasid);
+	}
+	/*
+	 * Tread softly on EntryHi, and so long as we support
+	 * having ASID_MASK smaller than the hardware maximum,
+	 * make sure no "soft" bits become "hard"...
+	 */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+			| (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
+	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/*
+	 * Mark current->active_mm as not "active" anymore.
+	 * We don't want to mislead possible IPI tlb flush routines.
+	 */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	local_irq_save(flags);
+
+	/* Unconditionally get a new ASID.  */
+	get_new_mmu_context(next, cpu);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* See comments for similar code above */
+	mtflags = dvpe();
+	oldasid = read_c0_entryhi() & ASID_MASK;
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		if(smtc_live_asid[mytlb][oldasid] == 0)
+			 smtc_flush_tlb_asid(oldasid);
+	}
+	/* See comments for similar code above */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+	                 (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
+	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+	/* mark mmu ownership change */
+	cpu_clear(cpu, prev->cpu_vm_mask);
+	cpu_set(cpu, next->cpu_vm_mask);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it.  Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm, unsigned cpu)
+{
+	unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	/* Can't use spinlock because called from TLB flush within DVPE */
+	unsigned int prevvpe;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	local_irq_save(flags);
+
+	if (cpu_isset(cpu, mm->cpu_vm_mask))  {
+		get_new_mmu_context(mm, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+		/* See comments for similar code above */
+		prevvpe = dvpe();
+		oldasid = (read_c0_entryhi() & ASID_MASK);
+		if (smtc_live_asid[mytlb][oldasid]) {
+			smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+			if(smtc_live_asid[mytlb][oldasid] == 0)
+				smtc_flush_tlb_asid(oldasid);
+		}
+		/* See comments for similar code above */
+		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+				| cpu_asid(cpu, mm));
+		ehb(); /* Make sure it propagates to TCStatus */
+		evpe(prevvpe);
+#else /* not CONFIG_MIPS_MT_SMTC */
+		write_c0_entryhi(cpu_asid(cpu, mm));
+#endif /* CONFIG_MIPS_MT_SMTC */
+	} else {
+		/* will get a new context next time */
+#ifndef CONFIG_MIPS_MT_SMTC
+		cpu_context(cpu, mm) = 0;
+#else /* SMTC */
+		int i;
+
+		/* SMTC shares the TLB (and ASIDs) across VPEs */
+		for_each_online_cpu(i) {
+		    if((smtc_status & SMTC_TLB_SHARED)
+		    || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+			cpu_context(i, mm) = 0;
+		}
+#endif /* CONFIG_MIPS_MT_SMTC */
+	}
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
new file mode 100644
index 0000000..f53ec54
--- /dev/null
+++ b/arch/mips/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/page.h>
+#include <mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define pfn_to_nid(pfn)		pa_to_nid((pfn) << PAGE_SHIFT)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
new file mode 100644
index 0000000..de6d09e
--- /dev/null
+++ b/arch/mips/include/asm/module.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+	/* Data Bus Error exception tables */
+	struct list_head dbe_list;
+	const struct exception_table_entry *dbe_start;
+	const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+
+typedef struct {
+	Elf64_Addr r_offset;			/* Address of relocation.  */
+	Elf64_Word r_sym;			/* Symbol index.  */
+	Elf64_Byte r_ssym;			/* Special symbol.  */
+	Elf64_Byte r_type3;			/* Third relocation.  */
+	Elf64_Byte r_type2;			/* Second relocation.  */
+	Elf64_Byte r_type;			/* First relocation.  */
+} Elf64_Mips_Rel;
+
+typedef struct {
+	Elf64_Addr r_offset;			/* Address of relocation.  */
+	Elf64_Word r_sym;			/* Symbol index.  */
+	Elf64_Byte r_ssym;			/* Special symbol.  */
+	Elf64_Byte r_type3;			/* Third relocation.  */
+	Elf64_Byte r_type2;			/* Second relocation.  */
+	Elf64_Byte r_type;			/* First relocation.  */
+	Elf64_Sxword r_addend;			/* Addend.  */
+} Elf64_Mips_Rela;
+
+#ifdef CONFIG_32BIT
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+#define Elf_Addr	Elf32_Addr
+
+#define Elf_Mips_Rel	Elf32_Rel
+#define Elf_Mips_Rela	Elf32_Rela
+
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+#define Elf_Addr	Elf64_Addr
+
+#define Elf_Mips_Rel	Elf64_Mips_Rel
+#define Elf_Mips_Rela	Elf64_Mips_Rela
+
+#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
+#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
+
+#endif
+
+#ifdef CONFIG_MODULES
+/* Given an address, look for it in the exception tables. */
+const struct exception_table_entry*search_module_dbetables(unsigned long addr);
+#else
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+#endif
+
+#ifdef CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4300
+#define MODULE_PROC_FAMILY "R4300 "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5432
+#define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R6000
+#define MODULE_PROC_FAMILY "R6000 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R8000
+#define MODULE_PROC_FAMILY "R8000 "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_RM9000
+#define MODULE_PROC_FAMILY "RM9000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON2
+#define MODULE_PROC_FAMILY "LOONGSON2 "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define MODULE_KERNEL_SMTC "MT_SMTC "
+#else
+#define MODULE_KERNEL_SMTC ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h
new file mode 100644
index 0000000..7989b9f
--- /dev/null
+++ b/arch/mips/include/asm/msc01_ic.h
@@ -0,0 +1,148 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2004 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H
+#define __ASM_MIPS_BOARDS_MSC01_IC_H
+
+/*****************************************************************************
+ * Register offset addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST_OFS     0x00008    /* Software reset              */
+#define MSC01_IC_ENAL_OFS    0x00100    /* Int_in enable mask 31:0     */
+#define MSC01_IC_ENAH_OFS    0x00108    /* Int_in enable mask 63:32    */
+#define MSC01_IC_DISL_OFS    0x00120    /* Int_in disable mask 31:0    */
+#define MSC01_IC_DISH_OFS    0x00128    /* Int_in disable mask 63:32   */
+#define MSC01_IC_ISBL_OFS    0x00140    /* Raw int_in 31:0             */
+#define MSC01_IC_ISBH_OFS    0x00148    /* Raw int_in 63:32            */
+#define MSC01_IC_ISAL_OFS    0x00160    /* Masked int_in 31:0          */
+#define MSC01_IC_ISAH_OFS    0x00168    /* Masked int_in 63:32         */
+#define MSC01_IC_LVL_OFS     0x00180    /* Disable priority int_out    */
+#define MSC01_IC_RAMW_OFS    0x00180    /* Shadow set RAM (EI)	       */
+#define MSC01_IC_OSB_OFS     0x00188    /* Raw int_out                 */
+#define MSC01_IC_OSA_OFS     0x00190    /* Masked int_out              */
+#define MSC01_IC_GENA_OFS    0x00198    /* Global HW int enable        */
+#define MSC01_IC_BASE_OFS    0x001a0    /* Base address of IC_VEC      */
+#define MSC01_IC_VEC_OFS     0x001b0    /* Active int's vector address */
+#define MSC01_IC_EOI_OFS     0x001c0    /* Enable lower level ints     */
+#define MSC01_IC_CFG_OFS     0x001c8    /* Configuration register      */
+#define MSC01_IC_TRLD_OFS    0x001d0    /* Interval timer reload val   */
+#define MSC01_IC_TVAL_OFS    0x001e0    /* Interval timer current val  */
+#define MSC01_IC_TCFG_OFS    0x001f0    /* Interval timer config       */
+#define MSC01_IC_SUP_OFS     0x00200    /* Set up int_in line 0        */
+#define MSC01_IC_ENA_OFS     0x00800    /* Int_in enable mask 63:0     */
+#define MSC01_IC_DIS_OFS     0x00820    /* Int_in disable mask 63:0    */
+#define MSC01_IC_ISB_OFS     0x00840    /* Raw int_in 63:0             */
+#define MSC01_IC_ISA_OFS     0x00860    /* Masked int_in 63:0          */
+
+/*****************************************************************************
+ * Register field encodings
+ *****************************************************************************/
+
+#define MSC01_IC_RST_RST_SHF      0
+#define MSC01_IC_RST_RST_MSK      0x00000001
+#define MSC01_IC_RST_RST_BIT      MSC01_IC_RST_RST_MSK
+#define MSC01_IC_LVL_LVL_SHF      0
+#define MSC01_IC_LVL_LVL_MSK      0x000000ff
+#define MSC01_IC_LVL_SPUR_SHF     16
+#define MSC01_IC_LVL_SPUR_MSK     0x00010000
+#define MSC01_IC_LVL_SPUR_BIT     MSC01_IC_LVL_SPUR_MSK
+#define MSC01_IC_RAMW_RIPL_SHF	  0
+#define MSC01_IC_RAMW_RIPL_MSK	  0x0000003f
+#define MSC01_IC_RAMW_DATA_SHF	  6
+#define MSC01_IC_RAMW_DATA_MSK	  0x00000fc0
+#define MSC01_IC_RAMW_ADDR_SHF	  25
+#define MSC01_IC_RAMW_ADDR_MSK	  0x7e000000
+#define MSC01_IC_RAMW_READ_SHF	  31
+#define MSC01_IC_RAMW_READ_MSK	  0x80000000
+#define MSC01_IC_RAMW_READ_BIT	  MSC01_IC_RAMW_READ_MSK
+#define MSC01_IC_OSB_OSB_SHF      0
+#define MSC01_IC_OSB_OSB_MSK      0x000000ff
+#define MSC01_IC_OSA_OSA_SHF      0
+#define MSC01_IC_OSA_OSA_MSK      0x000000ff
+#define MSC01_IC_GENA_GENA_SHF    0
+#define MSC01_IC_GENA_GENA_MSK    0x00000001
+#define MSC01_IC_GENA_GENA_BIT    MSC01_IC_GENA_GENA_MSK
+#define MSC01_IC_CFG_DIS_SHF      0
+#define MSC01_IC_CFG_DIS_MSK      0x00000001
+#define MSC01_IC_CFG_DIS_BIT      MSC01_IC_CFG_DIS_MSK
+#define MSC01_IC_CFG_SHFT_SHF     8
+#define MSC01_IC_CFG_SHFT_MSK     0x00000f00
+#define MSC01_IC_TCFG_ENA_SHF     0
+#define MSC01_IC_TCFG_ENA_MSK     0x00000001
+#define MSC01_IC_TCFG_ENA_BIT     MSC01_IC_TCFG_ENA_MSK
+#define MSC01_IC_TCFG_INT_SHF     8
+#define MSC01_IC_TCFG_INT_MSK     0x00000100
+#define MSC01_IC_TCFG_INT_BIT     MSC01_IC_TCFG_INT_MSK
+#define MSC01_IC_TCFG_EDGE_SHF    16
+#define MSC01_IC_TCFG_EDGE_MSK    0x00010000
+#define MSC01_IC_TCFG_EDGE_BIT    MSC01_IC_TCFG_EDGE_MSK
+#define MSC01_IC_SUP_PRI_SHF      0
+#define MSC01_IC_SUP_PRI_MSK      0x00000007
+#define MSC01_IC_SUP_EDGE_SHF     8
+#define MSC01_IC_SUP_EDGE_MSK     0x00000100
+#define MSC01_IC_SUP_EDGE_BIT     MSC01_IC_SUP_EDGE_MSK
+#define MSC01_IC_SUP_STEP         8
+
+/*
+ * MIPS System controller interrupt register base.
+ *
+ */
+
+/*****************************************************************************
+ * Absolute register addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST     (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
+#define MSC01_IC_ENAL    (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
+#define MSC01_IC_ENAH    (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
+#define MSC01_IC_DISL    (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
+#define MSC01_IC_DISH    (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
+#define MSC01_IC_ISBL    (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
+#define MSC01_IC_ISBH    (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
+#define MSC01_IC_ISAL    (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
+#define MSC01_IC_ISAH    (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
+#define MSC01_IC_LVL     (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
+#define MSC01_IC_RAMW    (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
+#define MSC01_IC_OSB     (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
+#define MSC01_IC_OSA     (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
+#define MSC01_IC_GENA    (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
+#define MSC01_IC_BASE    (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
+#define MSC01_IC_VEC     (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
+#define MSC01_IC_EOI     (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
+#define MSC01_IC_CFG     (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
+#define MSC01_IC_TRLD    (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
+#define MSC01_IC_TVAL    (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
+#define MSC01_IC_TCFG    (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
+#define MSC01_IC_SUP     (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
+#define MSC01_IC_ENA     (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
+#define MSC01_IC_DIS     (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
+#define MSC01_IC_ISB     (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
+#define MSC01_IC_ISA     (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
+
+/*
+ * Soc-it interrupts are configurable.
+ * Every board describes its IRQ mapping with this table.
+ */
+typedef struct msc_irqmap {
+	int	im_irq;
+	int	im_type;
+	int	im_lvl;
+} msc_irqmap_t;
+
+/* im_type */
+#define MSC01_IRQ_LEVEL		0
+#define MSC01_IRQ_EDGE		1
+
+extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq);
+extern void ll_msc_irq(void);
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
+
diff --git a/arch/mips/include/asm/msgbuf.h b/arch/mips/include/asm/msgbuf.h
new file mode 100644
index 0000000..0d6c7f1
--- /dev/null
+++ b/arch/mips/include/asm/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+
+/*
+ * The msqid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem
+ * - 2 miscellaneous unsigned long values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused1;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused2;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/mips/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
new file mode 100644
index 0000000..c3ca959
--- /dev/null
+++ b/arch/mips/include/asm/nile4.h
@@ -0,0 +1,310 @@
+/*
+ *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ *
+ *  This file is based on the following documentation:
+ *
+ *	NEC Vrc 5074 System Controller Data Sheet, June 1998
+ */
+
+#ifndef _ASM_NILE4_H
+#define _ASM_NILE4_H
+
+#define NILE4_BASE		0xbfa00000
+#define NILE4_SIZE		0x00200000		/* 2 MB */
+
+
+    /*
+     *  Physical Device Address Registers (PDARs)
+     */
+
+#define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
+#define NILE4_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
+#define NILE4_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
+#define NILE4_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
+#define NILE4_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
+#define NILE4_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
+#define NILE4_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
+#define NILE4_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
+#define NILE4_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
+#define NILE4_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
+#define NILE4_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
+#define NILE4_INTCS	0x0070	/* Controller Internal Registers and Devices */
+				/* [R/W] */
+#define NILE4_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
+
+
+    /*
+     *  CPU Interface Registers
+     */
+
+#define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
+#define NILE4_INTCTRL	0x0088	/* Interrupt Control [R/W] */
+#define NILE4_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
+#define NILE4_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
+				/* Enable [R/W] */
+#define NILE4_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
+#define NILE4_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
+
+
+    /*
+     *  Memory-Interface Registers
+     */
+
+#define NILE4_MEMCTRL	0x00C0	/* Memory Control */
+#define NILE4_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
+#define NILE4_CHKERR	0x00D0	/* Memory Check Error Status [R] */
+
+
+    /*
+     *  PCI-Bus Registers
+     */
+
+#define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
+#define NILE4_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
+#define NILE4_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
+#define NILE4_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
+#define NILE4_PCIERR	0x00B8	/* PCI Error [R/W] */
+
+
+    /*
+     *  Local-Bus Registers
+     */
+
+#define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
+#define NILE4_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
+#define NILE4_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
+#define NILE4_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
+#define NILE4_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
+#define NILE4_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
+#define NILE4_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
+#define NILE4_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
+#define NILE4_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
+				/* Enables [R/W] */
+#define NILE4_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
+#define NILE4_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
+
+
+    /*
+     *  DMA Registers
+     */
+
+#define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
+#define NILE4_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
+#define NILE4_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
+#define NILE4_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
+#define NILE4_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
+#define NILE4_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
+
+
+    /*
+     *  Timer Registers
+     */
+
+#define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
+#define NILE4_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
+#define NILE4_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
+#define NILE4_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
+#define NILE4_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
+#define NILE4_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
+#define NILE4_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
+#define NILE4_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
+
+
+    /*
+     *  PCI Configuration Space Registers
+     */
+
+#define NILE4_PCI_BASE	0x0200
+
+#define NILE4_VID	0x0200	/* PCI Vendor ID [R] */
+#define NILE4_DID	0x0202	/* PCI Device ID [R] */
+#define NILE4_PCICMD	0x0204	/* PCI Command [R/W] */
+#define NILE4_PCISTS	0x0206	/* PCI Status [R/W] */
+#define NILE4_REVID	0x0208	/* PCI Revision ID [R] */
+#define NILE4_CLASS	0x0209	/* PCI Class Code [R] */
+#define NILE4_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
+#define NILE4_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
+#define NILE4_HTYPE	0x020E	/* PCI Header Type [R] */
+#define NILE4_BIST	0x020F	/* BIST [R] (unimplemented) */
+#define NILE4_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
+#define NILE4_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
+#define NILE4_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
+#define NILE4_CIS	0x0228	/* PCI Cardbus CIS Pointer [R] */
+				/* (unimplemented) */
+#define NILE4_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
+#define NILE4_SSID	0x022E	/* PCI Sub-System ID [R/W] */
+#define NILE4_ROM	0x0230	/* Expansion ROM Base Address [R] */
+				/* (unimplemented) */
+#define NILE4_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
+#define NILE4_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
+#define NILE4_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
+#define NILE4_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
+#define NILE4_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
+#define NILE4_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
+#define NILE4_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
+#define NILE4_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
+#define NILE4_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
+#define NILE4_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
+#define NILE4_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
+#define NILE4_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
+
+
+    /*
+     *  Serial-Port Registers
+     */
+
+#define NILE4_UART_BASE	0x0300
+
+#define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
+#define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
+#define NILE4_UARTIER	0x0308	/* UART Interrupt Enable [R/W] */
+#define NILE4_UARTDLL	0x0300	/* UART Divisor Latch LSB [R/W] */
+#define NILE4_UARTDLM	0x0308	/* UART Divisor Latch MSB [R/W] */
+#define NILE4_UARTIIR	0x0310	/* UART Interrupt ID [R] */
+#define NILE4_UARTFCR	0x0310	/* UART FIFO Control [W] */
+#define NILE4_UARTLCR	0x0318	/* UART Line Control [R/W] */
+#define NILE4_UARTMCR	0x0320	/* UART Modem Control [R/W] */
+#define NILE4_UARTLSR	0x0328	/* UART Line Status [R/W] */
+#define NILE4_UARTMSR	0x0330	/* UART Modem Status [R/W] */
+#define NILE4_UARTSCR	0x0338	/* UART Scratch [R/W] */
+
+#define NILE4_UART_BASE_BAUD	520833	/* 100 MHz / 12 / 16 */
+
+
+    /*
+     *  Interrupt Lines
+     */
+
+#define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
+#define NILE4_INT_CNTD	1	/* CPU No-Target Decode Interrupt */
+#define NILE4_INT_MCE	2	/* Memory-Check Error Interrupt */
+#define NILE4_INT_DMA	3	/* DMA Controller Interrupt */
+#define NILE4_INT_UART	4	/* UART Interrupt */
+#define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
+#define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
+#define NILE4_INT_LBRTD	7	/* Local-Bus Ready Timer Interrupt */
+#define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
+#define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
+#define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
+#define NILE4_INT_INTD	11	/* PCI Interrupt Signal INTD# */
+#define NILE4_INT_INTE	12	/* PCI Interrupt Signal INTE# (ISA cascade) */
+#define NILE4_INT_RESV	13	/* Reserved */
+#define NILE4_INT_PCIS	14	/* PCI SERR# Interrupt */
+#define NILE4_INT_PCIE	15	/* PCI Internal Error Interrupt */
+
+
+    /*
+     *  Nile 4 Register Access
+     */
+
+static inline void nile4_sync(void)
+{
+    volatile u32 *p = (volatile u32 *)0xbfc00000;
+    (void)(*p);
+}
+
+static inline void nile4_out32(u32 offset, u32 val)
+{
+    *(volatile u32 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u32 nile4_in32(u32 offset)
+{
+    u32 val = *(volatile u32 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out16(u32 offset, u16 val)
+{
+    *(volatile u16 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u16 nile4_in16(u32 offset)
+{
+    u16 val = *(volatile u16 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+static inline void nile4_out8(u32 offset, u8 val)
+{
+    *(volatile u8 *)(NILE4_BASE+offset) = val;
+    nile4_sync();
+}
+
+static inline u8 nile4_in8(u32 offset)
+{
+    u8 val = *(volatile u8 *)(NILE4_BASE+offset);
+    nile4_sync();
+    return val;
+}
+
+
+    /*
+     *  Physical Device Address Registers
+     */
+
+extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+			   int on_memory_bus, int visible);
+
+
+    /*
+     *  PCI Master Registers
+     */
+
+#define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
+#define NILE4_PCICMD_IO		1	/* PCI I/O Space */
+#define NILE4_PCICMD_MEM	3	/* PCI Memory Space */
+#define NILE4_PCICMD_CFG	5	/* PCI Configuration Space */
+
+
+    /*
+     *  PCI Address Spaces
+     *
+     *  Note that these are multiplexed using PCIINIT[01]!
+     */
+
+#define NILE4_PCI_IO_BASE	0xa6000000
+#define NILE4_PCI_MEM_BASE	0xa8000000
+#define NILE4_PCI_CFG_BASE	NILE4_PCI_MEM_BASE
+#define NILE4_PCI_IACK_BASE	NILE4_PCI_IO_BASE
+
+
+extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
+
+
+    /*
+     *  Interrupt Programming
+     */
+
+#define NUM_I8259_INTERRUPTS	16
+#define NUM_NILE4_INTERRUPTS	16
+
+#define IRQ_I8259_CASCADE	NILE4_INT_INTE
+#define is_i8259_irq(irq)	((irq) < NUM_I8259_INTERRUPTS)
+#define nile4_to_irq(n)		((n)+NUM_I8259_INTERRUPTS)
+#define irq_to_nile4(n)		((n)-NUM_I8259_INTERRUPTS)
+
+extern void nile4_map_irq(int nile4_irq, int cpu_irq);
+extern void nile4_map_irq_all(int cpu_irq);
+extern void nile4_enable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq_all(void);
+extern u16 nile4_get_irq_stat(int cpu_irq);
+extern void nile4_enable_irq_output(int cpu_irq);
+extern void nile4_disable_irq_output(int cpu_irq);
+extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
+extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
+extern void nile4_clear_irq(int nile4_irq);
+extern void nile4_clear_irq_mask(u32 mask);
+extern u8 nile4_i8259_iack(void);
+extern void nile4_dump_irq_status(void);	/* Debug */
+
+#endif
+
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
new file mode 100644
index 0000000..c2394f8
--- /dev/null
+++ b/arch/mips/include/asm/paccess.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Protected memory access.  Used for everything that might take revenge
+ * by sending a DBE error like accessing possibly non-existant memory or
+ * devices.
+ */
+#ifndef _ASM_PACCESS_H
+#define _ASM_PACCESS_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_32BIT
+#define __PA_ADDR	".word"
+#endif
+#ifdef CONFIG_64BIT
+#define __PA_ADDR	".dword"
+#endif
+
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+
+#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr)))
+#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr)))
+
+struct __large_pstruct { unsigned long buf[100]; };
+#define __mp(x) (*(struct __large_pstruct *)(x))
+
+#define __get_dbe(x, ptr, size)						\
+({									\
+	long __gu_err;							\
+	__typeof__(*(ptr)) __gu_val;					\
+	unsigned long __gu_addr;					\
+	__asm__("":"=r" (__gu_val));					\
+	__gu_addr = (unsigned long) (ptr);				\
+	__asm__("":"=r" (__gu_err));					\
+	switch (size) {							\
+	case 1: __get_dbe_asm("lb"); break;				\
+	case 2: __get_dbe_asm("lh"); break;				\
+	case 4: __get_dbe_asm("lw"); break;				\
+	case 8:  __get_dbe_asm("ld"); break;				\
+	default: __get_dbe_unknown(); break;				\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_dbe_asm(insn)						\
+{									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"move\t%1,$0\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	:"=r" (__gu_err), "=r" (__gu_val)				\
+	:"o" (__mp(__gu_addr)), "i" (-EFAULT));				\
+}
+
+extern void __get_dbe_unknown(void);
+
+#define __put_dbe(x, ptr, size)						\
+({									\
+	long __pu_err;							\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_addr;							\
+	__pu_val = (x);							\
+	__pu_addr = (long) (ptr);					\
+	__asm__("":"=r" (__pu_err));					\
+	switch (size) {							\
+	case 1: __put_dbe_asm("sb"); break;				\
+	case 2: __put_dbe_asm("sh"); break;				\
+	case 4: __put_dbe_asm("sw"); break;				\
+	case 8: __put_dbe_asm("sd"); break;				\
+	default: __put_dbe_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_dbe_asm(insn)						\
+{									\
+	__asm__ __volatile__(						\
+	"1:\t" insn "\t%1,%2\n\t"					\
+	"move\t%0,$0\n"							\
+	"2:\n\t"							\
+	".section\t.fixup,\"ax\"\n"					\
+	"3:\tli\t%0,%3\n\t"						\
+	"j\t2b\n\t"							\
+	".previous\n\t"							\
+	".section\t__dbe_table,\"a\"\n\t"				\
+	__PA_ADDR "\t1b, 3b\n\t"					\
+	".previous"							\
+	: "=r" (__pu_err)						\
+	: "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT));	\
+}
+
+extern void __put_dbe_unknown(void);
+
+extern unsigned long search_dbe_table(unsigned long addr);
+
+#endif /* _ASM_PACCESS_H */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
new file mode 100644
index 0000000..fe7a88e
--- /dev/null
+++ b/arch/mips/include/asm/page.h
@@ -0,0 +1,191 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <spaces.h>
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PAGE_SHIFT	12
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PAGE_SHIFT	13
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PAGE_SHIFT	14
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PAGE_SHIFT	16
+#endif
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
+
+#ifndef __ASSEMBLY__
+
+#include <linux/pfn.h>
+#include <asm/io.h>
+
+extern void build_clear_page(void);
+extern void build_copy_page(void);
+
+/*
+ * It's normally defined only for FLATMEM config but it's
+ * used in our early mem init code for all memory models.
+ * So always define it.
+ */
+#define ARCH_PFN_OFFSET		PFN_UP(PHYS_OFFSET)
+
+extern void clear_page(void * page);
+extern void copy_page(void * to, void * from);
+
+extern unsigned long shm_align_mask;
+
+static inline unsigned long pages_do_alias(unsigned long addr1,
+	unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
+struct page;
+
+static inline void clear_user_page(void *addr, unsigned long vaddr,
+	struct page *page)
+{
+	extern void (*flush_data_cache_page)(unsigned long addr);
+
+	clear_page(addr);
+	if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK))
+		flush_data_cache_page((unsigned long)addr);
+}
+
+extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+	struct page *to);
+struct vm_area_struct;
+extern void copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+  #ifdef CONFIG_CPU_MIPS32
+    typedef struct { unsigned long pte_low, pte_high; } pte_t;
+    #define pte_val(x)    ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+    #define __pte(x)      ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+  #else
+     typedef struct { unsigned long long pte; } pte_t;
+     #define pte_val(x)	((x).pte)
+     #define __pte(x)	((pte_t) { (x) } )
+  #endif
+#else
+typedef struct { unsigned long pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+typedef struct page *pgtable_t;
+
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+#ifdef CONFIG_64BIT
+
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+
+#endif
+
+/*
+ * Right now we don't support 4-level pagetables, so all pud-related
+ * definitions come from <asm-generic/pgtable-nopud.h>.
+ */
+
+/*
+ * Finall the top of the hierarchy, the pgd
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) } )
+
+/*
+ * Manipulate page protection bits
+ */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/*
+ * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd
+ * pair of pages we only have a single global bit per pair of pages.  When
+ * writing to the TLB make sure we always have the bit set for both pages
+ * or none.  This macro is used to access the `buddy' of the pte we're just
+ * working on.
+ */
+#define ptep_buddy(x)	((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __pa()/__va() should be used only during mem init.
+ */
+#ifdef CONFIG_64BIT
+#define __pa(x)								\
+({									\
+    unsigned long __x = (unsigned long)(x);				\
+    __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x);			\
+})
+#else
+#define __pa(x)								\
+    ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
+#endif
+#define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+#define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x), 0))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#ifdef CONFIG_FLATMEM
+
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+
+#elif defined(CONFIG_SPARSEMEM)
+
+/* pfn_valid is defined in linux/mmzone.h */
+
+#elif defined(CONFIG_NEED_MULTIPLE_NODES)
+
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	int __n = pfn_to_nid(__pfn);					\
+	((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn +		\
+	                       NODE_DATA(__n)->node_spanned_pages)	\
+	            : 0);						\
+})
+
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(PFN_DOWN(virt_to_phys(kaddr)))
+#define virt_addr_valid(kaddr)	pfn_valid(PFN_DOWN(virt_to_phys(kaddr)))
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h
new file mode 100644
index 0000000..1d9bb8c
--- /dev/null
+++ b/arch/mips/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h
new file mode 100644
index 0000000..f526568
--- /dev/null
+++ b/arch/mips/include/asm/parport.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_PARPORT_H */
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
new file mode 100644
index 0000000..5510c53
--- /dev/null
+++ b/arch/mips/include/asm/pci.h
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/mm.h>
+
+#ifdef __KERNEL__
+
+/*
+ * This file essentially defines the interface between board
+ * specific PCI code and MIPS common PCI code.  Should potentially put
+ * into include/asm/pci.h file.
+ */
+
+#include <linux/ioport.h>
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+	struct pci_controller *next;
+	struct pci_bus *bus;
+
+	struct pci_ops *pci_ops;
+	struct resource *mem_resource;
+	unsigned long mem_offset;
+	struct resource *io_resource;
+	unsigned long io_offset;
+	unsigned long io_map_base;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	int iommu;
+
+	/* Optional access methods for reading/writing the bus number
+	   of the PCI controller */
+	int (*get_busno)(void);
+	void (*set_busno)(int busno);
+};
+
+/*
+ * Used by boards to register their PCI busses before the actual scanning.
+ */
+extern struct pci_controller * alloc_pci_controller(void);
+extern void register_pci_controller(struct pci_controller *hose);
+
+/*
+ * board supplied pci irq fixup routine
+ */
+extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long PCIBIOS_MIN_IO;
+extern unsigned long PCIBIOS_MIN_MEM;
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * Dynamic DMA mapping stuff.
+ * MIPS has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/*
+ * The PCI address space does equal the physical memory address space.  The
+ * networking and block device layers use this boolean for bounce buffer
+ * decisions.  This is set if any hose does not have an IOMMU.
+ */
+extern unsigned int PCI_DMA_BUS_IS_PHYS;
+
+#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+	struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+				    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+/* Chances are this interrupt is wired PC-style ...  */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+extern int pci_probe_only;
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
new file mode 100644
index 0000000..5f4b9d4
--- /dev/null
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -0,0 +1,854 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * bridge.h - bridge chip header file, derived from IRIX <sys/PCI/bridge.h>,
+ * revision 1.76.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/xtalk/xwidget.h>		/* generic widget header */
+#include <asm/sn/types.h>
+
+/* I/O page size */
+
+#define IOPFNSHIFT		12	/* 4K per mapped page */
+
+#define IOPGSIZE		(1 << IOPFNSHIFT)
+#define IOPG(x)			((x) >> IOPFNSHIFT)
+#define IOPGOFF(x)		((x) & (IOPGSIZE-1))
+
+/* Bridge RAM sizes */
+
+#define BRIDGE_ATE_RAM_SIZE	0x00000400	/* 1kB ATE RAM */
+
+#define BRIDGE_CONFIG_BASE	0x20000
+#define BRIDGE_CONFIG1_BASE	0x28000
+#define BRIDGE_CONFIG_END	0x30000
+#define BRIDGE_CONFIG_SLOT_SIZE 0x1000
+
+#define BRIDGE_SSRAM_512K	0x00080000	/* 512kB */
+#define BRIDGE_SSRAM_128K	0x00020000	/* 128kB */
+#define BRIDGE_SSRAM_64K	0x00010000	/* 64kB */
+#define BRIDGE_SSRAM_0K		0x00000000	/* 0kB */
+
+/* ========================================================================
+ *    Bridge address map
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All accesses to bridge hardware registers must be done
+ * using 32-bit loads and stores.
+ */
+typedef u32	bridgereg_t;
+
+typedef u64	bridge_ate_t;
+
+/* pointers to bridge ATEs
+ * are always "pointer to volatile"
+ */
+typedef volatile bridge_ate_t  *bridge_ate_p;
+
+/*
+ * It is generally preferred that hardware registers on the bridge
+ * are located from C code via this structure.
+ *
+ * Generated from Bridge spec dated 04oct95
+ */
+
+typedef volatile struct bridge_s {
+	/* Local Registers			       0x000000-0x00FFFF */
+
+	/* standard widget configuration	       0x000000-0x000057 */
+	widget_cfg_t	    b_widget;			/* 0x000000 */
+
+	/* helper fieldnames for accessing bridge widget */
+
+#define b_wid_id			b_widget.w_id
+#define b_wid_stat			b_widget.w_status
+#define b_wid_err_upper			b_widget.w_err_upper_addr
+#define b_wid_err_lower			b_widget.w_err_lower_addr
+#define b_wid_control			b_widget.w_control
+#define b_wid_req_timeout		b_widget.w_req_timeout
+#define b_wid_int_upper			b_widget.w_intdest_upper_addr
+#define b_wid_int_lower			b_widget.w_intdest_lower_addr
+#define b_wid_err_cmdword		b_widget.w_err_cmd_word
+#define b_wid_llp			b_widget.w_llp_cfg
+#define b_wid_tflush			b_widget.w_tflush
+
+	/* bridge-specific widget configuration	0x000058-0x00007F */
+	bridgereg_t	    _pad_000058;
+	bridgereg_t	    b_wid_aux_err;		/* 0x00005C */
+	bridgereg_t	    _pad_000060;
+	bridgereg_t	    b_wid_resp_upper;		/* 0x000064 */
+	bridgereg_t	    _pad_000068;
+	bridgereg_t	    b_wid_resp_lower;		/* 0x00006C */
+	bridgereg_t	    _pad_000070;
+	bridgereg_t	    b_wid_tst_pin_ctrl;		/* 0x000074 */
+	bridgereg_t	_pad_000078[2];
+
+	/* PMU & Map 0x000080-0x00008F */
+	bridgereg_t	_pad_000080;
+	bridgereg_t	b_dir_map;			/* 0x000084 */
+	bridgereg_t	_pad_000088[2];
+
+	/* SSRAM 0x000090-0x00009F */
+	bridgereg_t	_pad_000090;
+	bridgereg_t	b_ram_perr;			/* 0x000094 */
+	bridgereg_t	_pad_000098[2];
+
+	/* Arbitration 0x0000A0-0x0000AF */
+	bridgereg_t	_pad_0000A0;
+	bridgereg_t	b_arb;				/* 0x0000A4 */
+	bridgereg_t	_pad_0000A8[2];
+
+	/* Number In A Can 0x0000B0-0x0000BF */
+	bridgereg_t	_pad_0000B0;
+	bridgereg_t	b_nic;				/* 0x0000B4 */
+	bridgereg_t	_pad_0000B8[2];
+
+	/* PCI/GIO 0x0000C0-0x0000FF */
+	bridgereg_t	_pad_0000C0;
+	bridgereg_t	b_bus_timeout;			/* 0x0000C4 */
+#define b_pci_bus_timeout b_bus_timeout
+
+	bridgereg_t	_pad_0000C8;
+	bridgereg_t	b_pci_cfg;			/* 0x0000CC */
+	bridgereg_t	_pad_0000D0;
+	bridgereg_t	b_pci_err_upper;		/* 0x0000D4 */
+	bridgereg_t	_pad_0000D8;
+	bridgereg_t	b_pci_err_lower;		/* 0x0000DC */
+	bridgereg_t	_pad_0000E0[8];
+#define b_gio_err_lower b_pci_err_lower
+#define b_gio_err_upper b_pci_err_upper
+
+	/* Interrupt 0x000100-0x0001FF */
+	bridgereg_t	_pad_000100;
+	bridgereg_t	b_int_status;			/* 0x000104 */
+	bridgereg_t	_pad_000108;
+	bridgereg_t	b_int_enable;			/* 0x00010C */
+	bridgereg_t	_pad_000110;
+	bridgereg_t	b_int_rst_stat;			/* 0x000114 */
+	bridgereg_t	_pad_000118;
+	bridgereg_t	b_int_mode;			/* 0x00011C */
+	bridgereg_t	_pad_000120;
+	bridgereg_t	b_int_device;			/* 0x000124 */
+	bridgereg_t	_pad_000128;
+	bridgereg_t	b_int_host_err;			/* 0x00012C */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0001{30,,,68} */
+		bridgereg_t	addr;			/* 0x0001{34,,,6C} */
+	} b_int_addr[8];				/* 0x000130 */
+
+	bridgereg_t	_pad_000170[36];
+
+	/* Device 0x000200-0x0003FF */
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{00,,,38} */
+		bridgereg_t	reg;			/* 0x0002{04,,,3C} */
+	} b_device[8];					/* 0x000200 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{40,,,78} */
+		bridgereg_t	reg;			/* 0x0002{44,,,7C} */
+	} b_wr_req_buf[8];				/* 0x000240 */
+
+	struct {
+		bridgereg_t	__pad;			/* 0x0002{80,,,88} */
+		bridgereg_t	reg;			/* 0x0002{84,,,8C} */
+	} b_rrb_map[2];					/* 0x000280 */
+#define	b_even_resp	b_rrb_map[0].reg		/* 0x000284 */
+#define	b_odd_resp	b_rrb_map[1].reg		/* 0x00028C */
+
+	bridgereg_t	_pad_000290;
+	bridgereg_t	b_resp_status;			/* 0x000294 */
+	bridgereg_t	_pad_000298;
+	bridgereg_t	b_resp_clear;			/* 0x00029C */
+
+	bridgereg_t	_pad_0002A0[24];
+
+	char		_pad_000300[0x10000 - 0x000300];
+
+	/* Internal Address Translation Entry RAM 0x010000-0x0103FF */
+	union {
+		bridge_ate_t	wr;			/* write-only */
+		struct {
+			bridgereg_t	_p_pad;
+			bridgereg_t	rd;		/* read-only */
+		}			hi;
+	}			    b_int_ate_ram[128];
+
+	char	_pad_010400[0x11000 - 0x010400];
+
+	/* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */
+	struct {
+		bridgereg_t	_p_pad;
+		bridgereg_t	rd;		/* read-only */
+	} b_int_ate_ram_lo[128];
+
+	char	_pad_011400[0x20000 - 0x011400];
+
+	/* PCI Device Configuration Spaces 0x020000-0x027FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+		union {
+			u8	c[0x100 / 1];
+			u16	s[0x100 / 2];
+			u32	l[0x100 / 4];
+			u64	d[0x100 / 8];
+		} f[8];
+	} b_type0_cfg_dev[8];					/* 0x020000 */
+
+    /* PCI Type 1 Configuration Space 0x028000-0x028FFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x1000 / 1];
+		u16	s[0x1000 / 2];
+		u32	l[0x1000 / 4];
+		u64	d[0x1000 / 8];
+	} b_type1_cfg;					/* 0x028000-0x029000 */
+
+	char	_pad_029000[0x007000];			/* 0x029000-0x030000 */
+
+	/* PCI Interrupt Acknowledge Cycle 0x030000 */
+	union {
+		u8	c[8 / 1];
+		u16	s[8 / 2];
+		u32	l[8 / 4];
+		u64	d[8 / 8];
+	} b_pci_iack;						/* 0x030000 */
+
+	u8	_pad_030007[0x04fff8];			/* 0x030008-0x07FFFF */
+
+	/* External Address Translation Entry RAM 0x080000-0x0FFFFF */
+	bridge_ate_t    b_ext_ate_ram[0x10000];
+
+	/* Reserved 0x100000-0x1FFFFF */
+	char	_pad_100000[0x200000-0x100000];
+
+	/* PCI/GIO Device Spaces 0x200000-0xBFFFFF */
+	union {				/* make all access sizes available. */
+		u8	c[0x100000 / 1];
+		u16	s[0x100000 / 2];
+		u32	l[0x100000 / 4];
+		u64	d[0x100000 / 8];
+	} b_devio_raw[10];				/* 0x200000 */
+
+	/* b_devio macro is a bit strange; it reflects the
+	 * fact that the Bridge ASIC provides 2M for the
+	 * first two DevIO windows and 1M for the other six.
+	 */
+#define b_devio(n)	b_devio_raw[((n)<2)?(n*2):(n+2)]
+
+	/* External Flash Proms 1,0 0xC00000-0xFFFFFF */
+	union {		/* make all access sizes available. */
+		u8	c[0x400000 / 1];	/* read-only */
+		u16	s[0x400000 / 2];	/* read-write */
+		u32	l[0x400000 / 4];	/* read-only */
+		u64	d[0x400000 / 8];	/* read-only */
+	} b_external_flash;			/* 0xC00000 */
+} bridge_t;
+
+/*
+ * Field formats for Error Command Word and Auxillary Error Command Word
+ * of bridge.
+ */
+typedef struct bridge_err_cmdword_s {
+	union {
+		u32		cmd_word;
+		struct {
+			u32	didn:4,		/* Destination ID */
+				sidn:4,		/* Source ID	  */
+				pactyp:4,	/* Packet type	  */
+				tnum:5,		/* Trans Number	  */
+				coh:1,		/* Coh Transacti  */
+				ds:2,		/* Data size	  */
+				gbr:1,		/* GBR enable	  */
+				vbpm:1,		/* VBPM message	  */
+				error:1,	/* Error occurred  */
+				barr:1,		/* Barrier op	  */
+				rsvd:8;
+		} berr_st;
+	} berr_un;
+} bridge_err_cmdword_t;
+
+#define berr_field	berr_un.berr_st
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The values of these macros can and should be crosschecked
+ * regularly against the offsets of the like-named fields
+ * within the "bridge_t" structure above.
+ */
+
+/* Byte offset macros for Bridge internal registers */
+
+#define BRIDGE_WID_ID		WIDGET_ID
+#define BRIDGE_WID_STAT		WIDGET_STATUS
+#define BRIDGE_WID_ERR_UPPER	WIDGET_ERR_UPPER_ADDR
+#define BRIDGE_WID_ERR_LOWER	WIDGET_ERR_LOWER_ADDR
+#define BRIDGE_WID_CONTROL	WIDGET_CONTROL
+#define BRIDGE_WID_REQ_TIMEOUT	WIDGET_REQ_TIMEOUT
+#define BRIDGE_WID_INT_UPPER	WIDGET_INTDEST_UPPER_ADDR
+#define BRIDGE_WID_INT_LOWER	WIDGET_INTDEST_LOWER_ADDR
+#define BRIDGE_WID_ERR_CMDWORD	WIDGET_ERR_CMD_WORD
+#define BRIDGE_WID_LLP		WIDGET_LLP_CFG
+#define BRIDGE_WID_TFLUSH	WIDGET_TFLUSH
+
+#define BRIDGE_WID_AUX_ERR	0x00005C	/* Aux Error Command Word */
+#define BRIDGE_WID_RESP_UPPER	0x000064	/* Response Buf Upper Addr */
+#define BRIDGE_WID_RESP_LOWER	0x00006C	/* Response Buf Lower Addr */
+#define BRIDGE_WID_TST_PIN_CTRL 0x000074	/* Test pin control */
+
+#define BRIDGE_DIR_MAP		0x000084	/* Direct Map reg */
+
+#define BRIDGE_RAM_PERR		0x000094	/* SSRAM Parity Error */
+
+#define BRIDGE_ARB		0x0000A4	/* Arbitration Priority reg */
+
+#define BRIDGE_NIC		0x0000B4	/* Number In A Can */
+
+#define BRIDGE_BUS_TIMEOUT	0x0000C4	/* Bus Timeout Register */
+#define BRIDGE_PCI_BUS_TIMEOUT	BRIDGE_BUS_TIMEOUT
+#define BRIDGE_PCI_CFG		0x0000CC	/* PCI Type 1 Config reg */
+#define BRIDGE_PCI_ERR_UPPER	0x0000D4	/* PCI error Upper Addr */
+#define BRIDGE_PCI_ERR_LOWER	0x0000DC	/* PCI error Lower Addr */
+
+#define BRIDGE_INT_STATUS	0x000104	/* Interrupt Status */
+#define BRIDGE_INT_ENABLE	0x00010C	/* Interrupt Enables */
+#define BRIDGE_INT_RST_STAT	0x000114	/* Reset Intr Status */
+#define BRIDGE_INT_MODE		0x00011C	/* Interrupt Mode */
+#define BRIDGE_INT_DEVICE	0x000124	/* Interrupt Device */
+#define BRIDGE_INT_HOST_ERR	0x00012C	/* Host Error Field */
+
+#define BRIDGE_INT_ADDR0	0x000134	/* Host Address Reg */
+#define BRIDGE_INT_ADDR_OFF	0x000008	/* Host Addr offset (1..7) */
+#define BRIDGE_INT_ADDR(x)	(BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF)
+
+#define BRIDGE_DEVICE0		0x000204	/* Device 0 */
+#define BRIDGE_DEVICE_OFF	0x000008	/* Device offset (1..7) */
+#define BRIDGE_DEVICE(x)	(BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF)
+
+#define BRIDGE_WR_REQ_BUF0	0x000244	/* Write Request Buffer 0 */
+#define BRIDGE_WR_REQ_BUF_OFF	0x000008	/* Buffer Offset (1..7) */
+#define BRIDGE_WR_REQ_BUF(x)	(BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF)
+
+#define BRIDGE_EVEN_RESP	0x000284	/* Even Device Response Buf */
+#define BRIDGE_ODD_RESP		0x00028C	/* Odd Device Response Buf */
+
+#define BRIDGE_RESP_STATUS	0x000294	/* Read Response Status reg */
+#define BRIDGE_RESP_CLEAR	0x00029C	/* Read Response Clear reg */
+
+/* Byte offset macros for Bridge I/O space */
+
+#define BRIDGE_ATE_RAM		0x00010000	/* Internal Addr Xlat Ram */
+
+#define BRIDGE_TYPE0_CFG_DEV0	0x00020000	/* Type 0 Cfg, Device 0 */
+#define BRIDGE_TYPE0_CFG_SLOT_OFF	0x00001000	/* Type 0 Cfg Slot Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_FUNC_OFF	0x00000100	/* Type 0 Cfg Func Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_DEV(s)		(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF)
+#define BRIDGE_TYPE0_CFG_DEVF(s, f)	(BRIDGE_TYPE0_CFG_DEV0+\
+					 (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\
+					 (f)*BRIDGE_TYPE0_CFG_FUNC_OFF)
+
+#define BRIDGE_TYPE1_CFG	0x00028000	/* Type 1 Cfg space */
+
+#define BRIDGE_PCI_IACK		0x00030000	/* PCI Interrupt Ack */
+#define BRIDGE_EXT_SSRAM	0x00080000	/* Extern SSRAM (ATE) */
+
+/* Byte offset macros for Bridge device IO spaces */
+
+#define BRIDGE_DEV_CNT		8	/* Up to 8 devices per bridge */
+#define BRIDGE_DEVIO0		0x00200000	/* Device IO 0 Addr */
+#define BRIDGE_DEVIO1		0x00400000	/* Device IO 1 Addr */
+#define BRIDGE_DEVIO2		0x00600000	/* Device IO 2 Addr */
+#define BRIDGE_DEVIO_OFF	0x00100000	/* Device IO Offset (3..7) */
+
+#define BRIDGE_DEVIO_2MB	0x00200000	/* Device IO Offset (0..1) */
+#define BRIDGE_DEVIO_1MB	0x00100000	/* Device IO Offset (2..7) */
+
+#define BRIDGE_DEVIO(x)		((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB)
+
+#define BRIDGE_EXTERNAL_FLASH	0x00C00000	/* External Flash PROMS */
+
+/* ========================================================================
+ *    Bridge register bit field definitions
+ */
+
+/* Widget part number of bridge */
+#define BRIDGE_WIDGET_PART_NUM		0xc002
+#define XBRIDGE_WIDGET_PART_NUM		0xd002
+
+/* Manufacturer of bridge */
+#define BRIDGE_WIDGET_MFGR_NUM		0x036
+#define XBRIDGE_WIDGET_MFGR_NUM		0x024
+
+/* Revision numbers for known Bridge revisions */
+#define BRIDGE_REV_A			0x1
+#define BRIDGE_REV_B			0x2
+#define BRIDGE_REV_C			0x3
+#define	BRIDGE_REV_D			0x4
+
+/* Bridge widget status register bits definition */
+
+#define BRIDGE_STAT_LLP_REC_CNT		(0xFFu << 24)
+#define BRIDGE_STAT_LLP_TX_CNT		(0xFF << 16)
+#define BRIDGE_STAT_FLASH_SELECT	(0x1 << 6)
+#define BRIDGE_STAT_PCI_GIO_N		(0x1 << 5)
+#define BRIDGE_STAT_PENDING		(0x1F << 0)
+
+/* Bridge widget control register bits definition */
+#define BRIDGE_CTRL_FLASH_WR_EN		(0x1ul << 31)
+#define BRIDGE_CTRL_EN_CLK50		(0x1 << 30)
+#define BRIDGE_CTRL_EN_CLK40		(0x1 << 29)
+#define BRIDGE_CTRL_EN_CLK33		(0x1 << 28)
+#define BRIDGE_CTRL_RST(n)		((n) << 24)
+#define BRIDGE_CTRL_RST_MASK		(BRIDGE_CTRL_RST(0xF))
+#define BRIDGE_CTRL_RST_PIN(x)		(BRIDGE_CTRL_RST(0x1 << (x)))
+#define BRIDGE_CTRL_IO_SWAP		(0x1 << 23)
+#define BRIDGE_CTRL_MEM_SWAP		(0x1 << 22)
+#define BRIDGE_CTRL_PAGE_SIZE		(0x1 << 21)
+#define BRIDGE_CTRL_SS_PAR_BAD		(0x1 << 20)
+#define BRIDGE_CTRL_SS_PAR_EN		(0x1 << 19)
+#define BRIDGE_CTRL_SSRAM_SIZE(n)	((n) << 17)
+#define BRIDGE_CTRL_SSRAM_SIZE_MASK	(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_512K		(BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_128K		(BRIDGE_CTRL_SSRAM_SIZE(0x2))
+#define BRIDGE_CTRL_SSRAM_64K		(BRIDGE_CTRL_SSRAM_SIZE(0x1))
+#define BRIDGE_CTRL_SSRAM_1K		(BRIDGE_CTRL_SSRAM_SIZE(0x0))
+#define BRIDGE_CTRL_F_BAD_PKT		(0x1 << 16)
+#define BRIDGE_CTRL_LLP_XBAR_CRD(n)	((n) << 12)
+#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK	(BRIDGE_CTRL_LLP_XBAR_CRD(0xf))
+#define BRIDGE_CTRL_CLR_RLLP_CNT	(0x1 << 11)
+#define BRIDGE_CTRL_CLR_TLLP_CNT	(0x1 << 10)
+#define BRIDGE_CTRL_SYS_END		(0x1 << 9)
+#define BRIDGE_CTRL_MAX_TRANS(n)	((n) << 4)
+#define BRIDGE_CTRL_MAX_TRANS_MASK	(BRIDGE_CTRL_MAX_TRANS(0x1f))
+#define BRIDGE_CTRL_WIDGET_ID(n)	((n) << 0)
+#define BRIDGE_CTRL_WIDGET_ID_MASK	(BRIDGE_CTRL_WIDGET_ID(0xf))
+
+/* Bridge Response buffer Error Upper Register bit fields definition */
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20)
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+#define BRIDGE_RESP_ERRRUPPR_BUFMASK	(0xFFFF)
+
+#define BRIDGE_RESP_ERRUPPR_BUFNUM(x)	\
+			(((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \
+				BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+
+#define BRIDGE_RESP_ERRUPPR_DEVICE(x)	\
+			(((x) &	 BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \
+				 BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+
+/* Bridge direct mapping register bits definition */
+#define BRIDGE_DIRMAP_W_ID_SHFT		20
+#define BRIDGE_DIRMAP_W_ID		(0xf << BRIDGE_DIRMAP_W_ID_SHFT)
+#define BRIDGE_DIRMAP_RMF_64		(0x1 << 18)
+#define BRIDGE_DIRMAP_ADD512		(0x1 << 17)
+#define BRIDGE_DIRMAP_OFF		(0x1ffff << 0)
+#define BRIDGE_DIRMAP_OFF_ADDRSHFT	(31)	/* lsbit of DIRMAP_OFF is xtalk address bit 31 */
+
+/* Bridge Arbitration register bits definition */
+#define BRIDGE_ARB_REQ_WAIT_TICK(x)	((x) << 16)
+#define BRIDGE_ARB_REQ_WAIT_TICK_MASK	BRIDGE_ARB_REQ_WAIT_TICK(0x3)
+#define BRIDGE_ARB_REQ_WAIT_EN(x)	((x) << 8)
+#define BRIDGE_ARB_REQ_WAIT_EN_MASK	BRIDGE_ARB_REQ_WAIT_EN(0xff)
+#define BRIDGE_ARB_FREEZE_GNT		(1 << 6)
+#define BRIDGE_ARB_HPRI_RING_B2		(1 << 5)
+#define BRIDGE_ARB_HPRI_RING_B1		(1 << 4)
+#define BRIDGE_ARB_HPRI_RING_B0		(1 << 3)
+#define BRIDGE_ARB_LPRI_RING_B2		(1 << 2)
+#define BRIDGE_ARB_LPRI_RING_B1		(1 << 1)
+#define BRIDGE_ARB_LPRI_RING_B0		(1 << 0)
+
+/* Bridge Bus time-out register bits definition */
+#define BRIDGE_BUS_PCI_RETRY_HLD(x)	((x) << 16)
+#define BRIDGE_BUS_PCI_RETRY_HLD_MASK	BRIDGE_BUS_PCI_RETRY_HLD(0x1f)
+#define BRIDGE_BUS_GIO_TIMEOUT		(1 << 12)
+#define BRIDGE_BUS_PCI_RETRY_CNT(x)	((x) << 0)
+#define BRIDGE_BUS_PCI_RETRY_MASK	BRIDGE_BUS_PCI_RETRY_CNT(0x3ff)
+
+/* Bridge interrupt status register bits definition */
+#define BRIDGE_ISR_MULTI_ERR		(0x1u << 31)
+#define BRIDGE_ISR_PMU_ESIZE_FAULT	(0x1 << 30)
+#define BRIDGE_ISR_UNEXP_RESP		(0x1 << 29)
+#define BRIDGE_ISR_BAD_XRESP_PKT	(0x1 << 28)
+#define BRIDGE_ISR_BAD_XREQ_PKT		(0x1 << 27)
+#define BRIDGE_ISR_RESP_XTLK_ERR	(0x1 << 26)
+#define BRIDGE_ISR_REQ_XTLK_ERR		(0x1 << 25)
+#define BRIDGE_ISR_INVLD_ADDR		(0x1 << 24)
+#define BRIDGE_ISR_UNSUPPORTED_XOP	(0x1 << 23)
+#define BRIDGE_ISR_XREQ_FIFO_OFLOW	(0x1 << 22)
+#define BRIDGE_ISR_LLP_REC_SNERR	(0x1 << 21)
+#define BRIDGE_ISR_LLP_REC_CBERR	(0x1 << 20)
+#define BRIDGE_ISR_LLP_RCTY		(0x1 << 19)
+#define BRIDGE_ISR_LLP_TX_RETRY		(0x1 << 18)
+#define BRIDGE_ISR_LLP_TCTY		(0x1 << 17)
+#define BRIDGE_ISR_SSRAM_PERR		(0x1 << 16)
+#define BRIDGE_ISR_PCI_ABORT		(0x1 << 15)
+#define BRIDGE_ISR_PCI_PARITY		(0x1 << 14)
+#define BRIDGE_ISR_PCI_SERR		(0x1 << 13)
+#define BRIDGE_ISR_PCI_PERR		(0x1 << 12)
+#define BRIDGE_ISR_PCI_MST_TIMEOUT	(0x1 << 11)
+#define BRIDGE_ISR_GIO_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_ISR_PCI_RETRY_CNT	(0x1 << 10)
+#define BRIDGE_ISR_XREAD_REQ_TIMEOUT	(0x1 << 9)
+#define BRIDGE_ISR_GIO_B_ENBL_ERR	(0x1 << 8)
+#define BRIDGE_ISR_INT_MSK		(0xff << 0)
+#define BRIDGE_ISR_INT(x)		(0x1 << (x))
+
+#define BRIDGE_ISR_LINK_ERROR		\
+		(BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR|	\
+		 BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY|		\
+		 BRIDGE_ISR_LLP_TCTY)
+
+#define BRIDGE_ISR_PCIBUS_PIOERR	\
+		(BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT)
+
+#define BRIDGE_ISR_PCIBUS_ERROR		\
+		(BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR|		\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT|		\
+		 BRIDGE_ISR_PCI_PARITY)
+
+#define BRIDGE_ISR_XTALK_ERROR		\
+		(BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\
+		 BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR|	\
+		 BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR|	\
+		 BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT|	\
+		 BRIDGE_ISR_UNEXP_RESP)
+
+#define BRIDGE_ISR_ERRORS		\
+		(BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR|		\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR|		\
+		 BRIDGE_ISR_PMU_ESIZE_FAULT)
+
+/*
+ * List of Errors which are fatal and kill the system
+ */
+#define BRIDGE_ISR_ERROR_FATAL		\
+		((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\
+		 BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY )
+
+#define BRIDGE_ISR_ERROR_DUMP		\
+		(BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT|	\
+		 BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR)
+
+/* Bridge interrupt enable register bits definition */
+#define BRIDGE_IMR_UNEXP_RESP		BRIDGE_ISR_UNEXP_RESP
+#define BRIDGE_IMR_PMU_ESIZE_FAULT	BRIDGE_ISR_PMU_ESIZE_FAULT
+#define BRIDGE_IMR_BAD_XRESP_PKT	BRIDGE_ISR_BAD_XRESP_PKT
+#define BRIDGE_IMR_BAD_XREQ_PKT		BRIDGE_ISR_BAD_XREQ_PKT
+#define BRIDGE_IMR_RESP_XTLK_ERR	BRIDGE_ISR_RESP_XTLK_ERR
+#define BRIDGE_IMR_REQ_XTLK_ERR		BRIDGE_ISR_REQ_XTLK_ERR
+#define BRIDGE_IMR_INVLD_ADDR		BRIDGE_ISR_INVLD_ADDR
+#define BRIDGE_IMR_UNSUPPORTED_XOP	BRIDGE_ISR_UNSUPPORTED_XOP
+#define BRIDGE_IMR_XREQ_FIFO_OFLOW	BRIDGE_ISR_XREQ_FIFO_OFLOW
+#define BRIDGE_IMR_LLP_REC_SNERR	BRIDGE_ISR_LLP_REC_SNERR
+#define BRIDGE_IMR_LLP_REC_CBERR	BRIDGE_ISR_LLP_REC_CBERR
+#define BRIDGE_IMR_LLP_RCTY		BRIDGE_ISR_LLP_RCTY
+#define BRIDGE_IMR_LLP_TX_RETRY		BRIDGE_ISR_LLP_TX_RETRY
+#define BRIDGE_IMR_LLP_TCTY		BRIDGE_ISR_LLP_TCTY
+#define BRIDGE_IMR_SSRAM_PERR		BRIDGE_ISR_SSRAM_PERR
+#define BRIDGE_IMR_PCI_ABORT		BRIDGE_ISR_PCI_ABORT
+#define BRIDGE_IMR_PCI_PARITY		BRIDGE_ISR_PCI_PARITY
+#define BRIDGE_IMR_PCI_SERR		BRIDGE_ISR_PCI_SERR
+#define BRIDGE_IMR_PCI_PERR		BRIDGE_ISR_PCI_PERR
+#define BRIDGE_IMR_PCI_MST_TIMEOUT	BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_IMR_GIO_MST_TIMEOUT	BRIDGE_ISR_GIO_MST_TIMEOUT
+#define BRIDGE_IMR_PCI_RETRY_CNT	BRIDGE_ISR_PCI_RETRY_CNT
+#define BRIDGE_IMR_XREAD_REQ_TIMEOUT	BRIDGE_ISR_XREAD_REQ_TIMEOUT
+#define BRIDGE_IMR_GIO_B_ENBL_ERR	BRIDGE_ISR_GIO_B_ENBL_ERR
+#define BRIDGE_IMR_INT_MSK		BRIDGE_ISR_INT_MSK
+#define BRIDGE_IMR_INT(x)		BRIDGE_ISR_INT(x)
+
+/* Bridge interrupt reset register bits definition */
+#define BRIDGE_IRR_MULTI_CLR		(0x1 << 6)
+#define BRIDGE_IRR_CRP_GRP_CLR		(0x1 << 5)
+#define BRIDGE_IRR_RESP_BUF_GRP_CLR	(0x1 << 4)
+#define BRIDGE_IRR_REQ_DSP_GRP_CLR	(0x1 << 3)
+#define BRIDGE_IRR_LLP_GRP_CLR		(0x1 << 2)
+#define BRIDGE_IRR_SSRAM_GRP_CLR	(0x1 << 1)
+#define BRIDGE_IRR_PCI_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_GIO_GRP_CLR		(0x1 << 0)
+#define BRIDGE_IRR_ALL_CLR		0x7f
+
+#define BRIDGE_IRR_CRP_GRP		(BRIDGE_ISR_UNEXP_RESP | \
+					 BRIDGE_ISR_XREQ_FIFO_OFLOW)
+#define BRIDGE_IRR_RESP_BUF_GRP		(BRIDGE_ISR_BAD_XRESP_PKT | \
+					 BRIDGE_ISR_RESP_XTLK_ERR | \
+					 BRIDGE_ISR_XREAD_REQ_TIMEOUT)
+#define BRIDGE_IRR_REQ_DSP_GRP		(BRIDGE_ISR_UNSUPPORTED_XOP | \
+					 BRIDGE_ISR_BAD_XREQ_PKT | \
+					 BRIDGE_ISR_REQ_XTLK_ERR | \
+					 BRIDGE_ISR_INVLD_ADDR)
+#define BRIDGE_IRR_LLP_GRP		(BRIDGE_ISR_LLP_REC_SNERR | \
+					 BRIDGE_ISR_LLP_REC_CBERR | \
+					 BRIDGE_ISR_LLP_RCTY | \
+					 BRIDGE_ISR_LLP_TX_RETRY | \
+					 BRIDGE_ISR_LLP_TCTY)
+#define BRIDGE_IRR_SSRAM_GRP		(BRIDGE_ISR_SSRAM_PERR | \
+					 BRIDGE_ISR_PMU_ESIZE_FAULT)
+#define BRIDGE_IRR_PCI_GRP		(BRIDGE_ISR_PCI_ABORT | \
+					 BRIDGE_ISR_PCI_PARITY | \
+					 BRIDGE_ISR_PCI_SERR | \
+					 BRIDGE_ISR_PCI_PERR | \
+					 BRIDGE_ISR_PCI_MST_TIMEOUT | \
+					 BRIDGE_ISR_PCI_RETRY_CNT)
+
+#define BRIDGE_IRR_GIO_GRP		(BRIDGE_ISR_GIO_B_ENBL_ERR | \
+					 BRIDGE_ISR_GIO_MST_TIMEOUT)
+
+/* Bridge INT_DEV register bits definition */
+#define BRIDGE_INT_DEV_SHFT(n)		((n)*3)
+#define BRIDGE_INT_DEV_MASK(n)		(0x7 << BRIDGE_INT_DEV_SHFT(n))
+#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line))
+
+/* Bridge interrupt(x) register bits definition */
+#define BRIDGE_INT_ADDR_HOST		0x0003FF00
+#define BRIDGE_INT_ADDR_FLD		0x000000FF
+
+#define BRIDGE_TMO_PCI_RETRY_HLD_MASK	0x1f0000
+#define BRIDGE_TMO_GIO_TIMEOUT_MASK	0x001000
+#define BRIDGE_TMO_PCI_RETRY_CNT_MASK	0x0003ff
+
+#define BRIDGE_TMO_PCI_RETRY_CNT_MAX	0x3ff
+
+/*
+ * The NASID should be shifted by this amount and stored into the
+ * interrupt(x) register.
+ */
+#define BRIDGE_INT_ADDR_NASID_SHFT	8
+
+/*
+ * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to
+ * memory.
+ */
+#define BRIDGE_INT_ADDR_DEST_IO		(1 << 17)
+#define BRIDGE_INT_ADDR_DEST_MEM	0
+#define BRIDGE_INT_ADDR_MASK		(1 << 17)
+
+/* Bridge device(x) register bits definition */
+#define BRIDGE_DEV_ERR_LOCK_EN		0x10000000
+#define BRIDGE_DEV_PAGE_CHK_DIS		0x08000000
+#define BRIDGE_DEV_FORCE_PCI_PAR	0x04000000
+#define BRIDGE_DEV_VIRTUAL_EN		0x02000000
+#define BRIDGE_DEV_PMU_WRGA_EN		0x01000000
+#define BRIDGE_DEV_DIR_WRGA_EN		0x00800000
+#define BRIDGE_DEV_DEV_SIZE		0x00400000
+#define BRIDGE_DEV_RT			0x00200000
+#define BRIDGE_DEV_SWAP_PMU		0x00100000
+#define BRIDGE_DEV_SWAP_DIR		0x00080000
+#define BRIDGE_DEV_PREF			0x00040000
+#define BRIDGE_DEV_PRECISE		0x00020000
+#define BRIDGE_DEV_COH			0x00010000
+#define BRIDGE_DEV_BARRIER		0x00008000
+#define BRIDGE_DEV_GBR			0x00004000
+#define BRIDGE_DEV_DEV_SWAP		0x00002000
+#define BRIDGE_DEV_DEV_IO_MEM		0x00001000
+#define BRIDGE_DEV_OFF_MASK		0x00000fff
+#define BRIDGE_DEV_OFF_ADDR_SHFT	20
+
+#define BRIDGE_DEV_PMU_BITS		(BRIDGE_DEV_PMU_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_PMU)
+#define BRIDGE_DEV_D32_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_PREF		| \
+					 BRIDGE_DEV_PRECISE		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+#define BRIDGE_DEV_D64_BITS		(BRIDGE_DEV_DIR_WRGA_EN		| \
+					 BRIDGE_DEV_SWAP_DIR		| \
+					 BRIDGE_DEV_COH			| \
+					 BRIDGE_DEV_BARRIER)
+
+/* Bridge Error Upper register bit field definition */
+#define BRIDGE_ERRUPPR_DEVMASTER	(0x1 << 20)	/* Device was master */
+#define BRIDGE_ERRUPPR_PCIVDEV		(0x1 << 19)	/* Virtual Req value */
+#define BRIDGE_ERRUPPR_DEVNUM_SHFT	(16)
+#define BRIDGE_ERRUPPR_DEVNUM_MASK	(0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_ERRUPPR_DEVICE(err)	(((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7)
+#define BRIDGE_ERRUPPR_ADDRMASK		(0xFFFF)
+
+/* Bridge interrupt mode register bits definition */
+#define BRIDGE_INTMODE_CLR_PKT_EN(x)	(0x1 << (x))
+
+/* this should be written to the xbow's link_control(x) register */
+#define BRIDGE_CREDIT	3
+
+/* RRB assignment register */
+#define	BRIDGE_RRB_EN	0x8	/* after shifting down */
+#define	BRIDGE_RRB_DEV	0x7	/* after shifting down */
+#define	BRIDGE_RRB_VDEV	0x4	/* after shifting down */
+#define	BRIDGE_RRB_PDEV	0x3	/* after shifting down */
+
+/* RRB status register */
+#define	BRIDGE_RRB_VALID(r)	(0x00010000<<(r))
+#define	BRIDGE_RRB_INUSE(r)	(0x00000001<<(r))
+
+/* RRB clear register */
+#define	BRIDGE_RRB_CLEAR(r)	(0x00000001<<(r))
+
+/* xbox system controller declarations */
+#define XBOX_BRIDGE_WID         8
+#define FLASH_PROM1_BASE        0xE00000 /* To read the xbox sysctlr status */
+#define XBOX_RPS_EXISTS		1 << 6	 /* RPS bit in status register */
+#define XBOX_RPS_FAIL		1 << 4	 /* RPS status bit in register */
+
+/* ========================================================================
+ */
+/*
+ * Macros for Xtalk to Bridge bus (PCI/GIO) PIO
+ * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings
+ */
+/* XTALK addresses that map into Bridge Bus addr space */
+#define BRIDGE_PIO32_XTALK_ALIAS_BASE	0x000040000000L
+#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT	0x00007FFFFFFFL
+#define BRIDGE_PIO64_XTALK_ALIAS_BASE	0x000080000000L
+#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT	0x0000BFFFFFFFL
+#define BRIDGE_PCIIO_XTALK_ALIAS_BASE	0x000100000000L
+#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT	0x0001FFFFFFFFL
+
+/* Ranges of PCI bus space that can be accessed via PIO from xtalk */
+#define BRIDGE_MIN_PIO_ADDR_MEM		0x00000000	/* 1G PCI memory space */
+#define BRIDGE_MAX_PIO_ADDR_MEM		0x3fffffff
+#define BRIDGE_MIN_PIO_ADDR_IO		0x00000000	/* 4G PCI IO space */
+#define BRIDGE_MAX_PIO_ADDR_IO		0xffffffff
+
+/* XTALK addresses that map into PCI addresses */
+#define BRIDGE_PCI_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_MEM64_BASE		BRIDGE_PIO64_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM64_LIMIT		BRIDGE_PIO64_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_IO_BASE		BRIDGE_PCIIO_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_IO_LIMIT		BRIDGE_PCIIO_XTALK_ALIAS_LIMIT
+
+/*
+ * Macros for Bridge bus (PCI/GIO) to Xtalk DMA
+ */
+/* Bridge Bus DMA addresses */
+#define BRIDGE_LOCAL_BASE		0
+#define BRIDGE_DMA_MAPPED_BASE		0x40000000
+#define BRIDGE_DMA_MAPPED_SIZE		0x40000000	/* 1G Bytes */
+#define BRIDGE_DMA_DIRECT_BASE		0x80000000
+#define BRIDGE_DMA_DIRECT_SIZE		0x80000000	/* 2G Bytes */
+
+#define PCI32_LOCAL_BASE		BRIDGE_LOCAL_BASE
+
+/* PCI addresses of regions decoded by Bridge for DMA */
+#define PCI32_MAPPED_BASE		BRIDGE_DMA_MAPPED_BASE
+#define PCI32_DIRECT_BASE		BRIDGE_DMA_DIRECT_BASE
+
+#define IS_PCI32_LOCAL(x)	((ulong_t)(x) < PCI32_MAPPED_BASE)
+#define IS_PCI32_MAPPED(x)	((ulong_t)(x) < PCI32_DIRECT_BASE && \
+					(ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x)	((ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI64(x)		((ulong_t)(x) >= PCI64_BASE)
+
+/*
+ * The GIO address space.
+ */
+/* Xtalk to GIO PIO */
+#define BRIDGE_GIO_MEM32_BASE		BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_GIO_MEM32_LIMIT		BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+
+#define GIO_LOCAL_BASE			BRIDGE_LOCAL_BASE
+
+/* GIO addresses of regions decoded by Bridge for DMA */
+#define GIO_MAPPED_BASE			BRIDGE_DMA_MAPPED_BASE
+#define GIO_DIRECT_BASE			BRIDGE_DMA_DIRECT_BASE
+
+#define IS_GIO_LOCAL(x)		((ulong_t)(x) < GIO_MAPPED_BASE)
+#define IS_GIO_MAPPED(x)	((ulong_t)(x) < GIO_DIRECT_BASE && \
+					(ulong_t)(x) >= GIO_MAPPED_BASE)
+#define IS_GIO_DIRECT(x)	((ulong_t)(x) >= GIO_MAPPED_BASE)
+
+/* PCI to xtalk mapping */
+
+/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine
+ * which xtalk address is accessed
+ */
+#define BRIDGE_DIRECT_32_SEG_SIZE	BRIDGE_DMA_DIRECT_SIZE
+#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr)		\
+	((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE +	\
+		((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE)
+
+/* 64-bit address attribute masks */
+#define PCI64_ATTR_TARG_MASK	0xf000000000000000
+#define PCI64_ATTR_TARG_SHFT	60
+#define PCI64_ATTR_PREF		0x0800000000000000
+#define PCI64_ATTR_PREC		0x0400000000000000
+#define PCI64_ATTR_VIRTUAL	0x0200000000000000
+#define PCI64_ATTR_BAR		0x0100000000000000
+#define PCI64_ATTR_RMF_MASK	0x00ff000000000000
+#define PCI64_ATTR_RMF_SHFT	48
+
+#ifndef __ASSEMBLY__
+/* Address translation entry for mapped pci32 accesses */
+typedef union ate_u {
+	u64	ent;
+	struct ate_s {
+		u64	rmf:16;
+		u64	addr:36;
+		u64	targ:4;
+		u64	reserved:3;
+		u64	barrier:1;
+		u64	prefetch:1;
+		u64	precise:1;
+		u64	coherent:1;
+		u64	valid:1;
+	} field;
+} ate_t;
+#endif /* !__ASSEMBLY__ */
+
+#define ATE_V		0x01
+#define ATE_CO		0x02
+#define ATE_PREC	0x04
+#define ATE_PREF	0x08
+#define ATE_BAR		0x10
+
+#define ATE_PFNSHIFT		12
+#define ATE_TIDSHIFT		8
+#define ATE_RMFSHIFT		48
+
+#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \
+				((xid)<<ATE_TIDSHIFT) | \
+				(attr)
+
+#define BRIDGE_INTERNAL_ATES	128
+
+struct bridge_controller {
+	struct pci_controller	pc;
+	struct resource		mem;
+	struct resource		io;
+	bridge_t		*base;
+	nasid_t			nasid;
+	unsigned int		widget_id;
+	unsigned int 		irq_cpu;
+	dma64_addr_t		baddr;
+	unsigned int		pci_int[8];
+};
+
+#define BRIDGE_CONTROLLER(bus) \
+	((struct bridge_controller *)((bus)->sysdata))
+
+extern void register_bridge_irq(unsigned int irq);
+extern int request_bridge_irq(struct bridge_controller *bc);
+
+extern struct pci_ops bridge_pci_ops;
+
+#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h
new file mode 100644
index 0000000..844e763
--- /dev/null
+++ b/arch/mips/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_PERCPU_H */
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
new file mode 100644
index 0000000..1275831
--- /dev/null
+++ b/arch/mips/include/asm/pgalloc.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/highmem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+	pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+#ifdef CONFIG_64BIT
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud((unsigned long)pmd));
+}
+#endif
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret, *init;
+
+	ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+	if (ret) {
+		init = pgd_offset(&init_mm, 0UL);
+		pgd_init((unsigned long)ret);
+		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+	if (pte) {
+		clear_highpage(pte);
+		pgtable_page_ctor(pte);
+	}
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+#ifdef CONFIG_32BIT
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *pmd;
+
+	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER);
+	if (pmd)
+		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+	return pmd;
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#define __pmd_free_tlb(tlb, x)	pmd_free((tlb)->mm, x)
+
+#endif
+
+#define check_pgt_cache()	do { } while (0)
+
+extern void pagetable_init(void);
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
new file mode 100644
index 0000000..55813d6
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_32_H
+#define _ASM_PGTABLE_32_H
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+#include <linux/linkage.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * - add_wired_entry() add a fixed TLB entry, and move wired register
+ */
+extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ *	starting at the top and working down. This is for populating the
+ *	TLB before trap_init() puts the TLB miss handler in place. It
+ *	should be used only for entries matching the actual page tables,
+ *	to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+			       unsigned long entryhi, unsigned long pagemask);
+
+
+/* Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386.  Some day
+ * when we have proper page coloring support we can have a 1% quicker
+ * tlb refill handling mechanism, but for now it is a bit slower but
+ * works even with the cache aliasing problem the R4k and above have.
+ */
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PUD/PMD directory physically.
+ */
+#define __PGD_ORDER	(32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2)
+#define PGD_ORDER	(__PGD_ORDER >= 0 ? __PGD_ORDER : 0)
+#define PUD_ORDER	aieeee_attempt_to_allocate_pud
+#define PMD_ORDER	1
+#define PTE_ORDER	0
+
+#define PTRS_PER_PGD	(USER_PTRS_PER_PGD * 2)
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define VMALLOC_START     MAP_BASE
+
+#define PKMAP_BASE		(0xfe000000UL)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#endif
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void load_pgd(unsigned long pg_dir);
+
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
+static inline pte_t
+pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	pte_t pte;
+	pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
+	pte.pte_low = pgprot_val(prot);
+	return pte;
+}
+
+#else
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+
+#define pte_offset_map(dir, address)                                    \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)                             \
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+/* Swap entries must have VALID bit cleared. */
+#define __swp_type(x)		(((x).val >> 10) & 0x1f)
+#define __swp_offset(x)		((x).val >> 15)
+#define __swp_entry(type,offset)	\
+	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+
+/*
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
+				 (((_pte).pte >> 2 ) & 0x38) | \
+				 (((_pte).pte >> 10) <<  6 ))
+
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
+					   (((off) & 0x38) << 2 ) | \
+					   (((off) >>  6 ) << 10) | \
+					   _PAGE_FILE })
+
+#else
+
+/* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x)		(((x).val >> 2) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 7)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+#else
+#define __swp_type(x)		(((x).val >> 8) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 13)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+/*
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
+ */
+#define PTE_FILE_MAX_BITS	30
+
+#define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) 	((pte_t) { _PAGE_FILE, (off) << 2 })
+
+#else
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
+				 (((_pte).pte >> 2) & 0x8) | \
+				 (((_pte).pte >> 8) <<  4))
+
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
+					   (((off) & 0x8) << 2) | \
+					   (((off) >>  4) << 8) | \
+					   _PAGE_FILE })
+#endif
+
+#endif
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
+#else
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+#endif
+
+#endif /* _ASM_PGTABLE_32_H */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
new file mode 100644
index 0000000..943515f
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_64_H
+#define _ASM_PGTABLE_64_H
+
+#include <linux/linkage.h>
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Each address space has 2 4K pages as its page directory, giving 1024
+ * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
+ * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page
+ * tables. Each page table is also a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to
+ * invalid_pmd_table, each pmd entry is initialized to point to
+ * invalid_pte_table, each pte is initialized to 0. When memory is low,
+ * and a pmd table or a page table allocation fails, empty_bad_pmd_table
+ * and empty_bad_page_table is returned back to higher layer code, so
+ * that the failure is recognized later on. Linux does not seem to
+ * handle these failures very well though. The empty_bad_page_table has
+ * invalid pte entries in it, to force page faults.
+ *
+ * Kernel mappings: kernel mappings are held in the swapper_pg_table.
+ * The layout is identical to userspace except it's indexed with the
+ * fault address - VMALLOC_START.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * For 4kB page size we use a 3 level page tree and an 8kB pud, which
+ * permits us mapping 40 bits of virtual address space.
+ *
+ * We used to implement 41 bits by having an order 1 pmd level but that seemed
+ * rather pointless.
+ *
+ * For 8kB page size we use a 3 level page tree which permits a total of
+ * 8TB of address space.  Alternatively a 33-bit / 8GB organization using
+ * two levels would be easy to implement.
+ *
+ * For 16kB page size we use a 2 level page tree which permits a total of
+ * 36 bits of virtual address space.  We could add a third level but it seems
+ * like at the moment there's no need for this.
+ *
+ * For 64kB page size we use a 2 level page table tree for a total of 42 bits
+ * of virtual address space.
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PGD_ORDER		1
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
+
+#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PMD	((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#if PGDIR_SIZE >= TASK_SIZE
+#define USER_PTRS_PER_PGD       (1)
+#else
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#endif
+#define FIRST_USER_ADDRESS	0UL
+
+#define VMALLOC_START		MAP_BASE
+#define VMALLOC_END	\
+	(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
+	VMALLOC_START != CKSSEG
+/* Load modules into 32bit-compatible segment. */
+#define MODULE_START	CKSSEG
+#define MODULE_END	(FIXADDR_START-2*PAGE_SIZE)
+extern pgd_t module_pg_dir[PTRS_PER_PGD];
+#endif
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pte_t invalid_pte_table[PTRS_PER_PTE];
+extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
+extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+/*
+ * Empty pud entries point to the invalid_pmd_table.
+ */
+static inline int pud_none(pud_t pud)
+{
+	return pud_val(pud) == (unsigned long) invalid_pmd_table;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return pud_val(pud) & ~PAGE_MASK;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return pud_val(pud) != (unsigned long) invalid_pmd_table;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	pmd_index(address)
+
+/* to find an entry in a kernel page-table-directory */
+#ifdef MODULE_START
+#define pgd_offset_k(address) \
+	((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL))
+#else
+#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL)
+#endif
+
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return pud_val(pud);
+}
+#define pud_phys(pud)		virt_to_phys((void *)pud_val(pud))
+#define pud_page(pud)		(pfn_to_page(pud_phys(pud) >> PAGE_SHIFT))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
+{
+	return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)						\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_map(dir, address)					\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)				\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+/*
+ * Non-present pages:  high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_offset(x)		((x).val >> 40)
+#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+/*
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
+ */
+#define PTE_FILE_MAX_BITS	56
+
+#define pte_to_pgoff(_pte)	((_pte).pte >> 8)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 8) | _PAGE_FILE })
+
+#endif /* _ASM_PGTABLE_64_H */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
new file mode 100644
index 0000000..51b34a4
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -0,0 +1,137 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2002 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#ifndef _ASM_PGTABLE_BITS_H
+#define _ASM_PGTABLE_BITS_H
+
+
+/*
+ * Note that we shift the lower 32bits of each EntryLo[01] entry
+ * 6 bits to the left. That way we can convert the PFN into the
+ * physical address by a single 'and' operation and gain 6 additional
+ * bits for storing information which isn't present in a normal
+ * MIPS page table.
+ *
+ * Similar to the Alpha port, we need to keep track of the ref
+ * and mod bits in software.  We have a software "yeah you can read
+ * from this page" bit, and a hardware one which actually lets the
+ * process read from the page.  On the same token we have a software
+ * writable bit and the real hardware one which actually lets the
+ * process write to the page, this keeps a mod bit via the hardware
+ * dirty bit.
+ *
+ * Certain revisions of the R4000 and R5000 have a bug where if a
+ * certain sequence occurs in the last 3 instructions of an executable
+ * page, and the following page is not mapped, the cpu can do
+ * unpredictable things.  The code (when it is written) to deal with
+ * this problem will be in the update_mmu_cache() code for the r4k.
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define _PAGE_PRESENT               (1<<6)  /* implemented in software */
+#define _PAGE_READ                  (1<<7)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<8)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<9)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<10) /* implemented in software */
+#define _PAGE_FILE                  (1<<10) /* set:pagecache unset:swap */
+
+#define _PAGE_R4KBUG                (1<<0)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<0)
+#define _PAGE_VALID                 (1<<1)
+#define _PAGE_SILENT_READ           (1<<1)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<2)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<2)
+#define _CACHE_SHIFT                3
+#define _CACHE_MASK                 (7<<3)
+
+#else
+
+#define _PAGE_PRESENT               (1<<0)  /* implemented in software */
+#define _PAGE_READ                  (1<<1)  /* implemented in software */
+#define _PAGE_WRITE                 (1<<2)  /* implemented in software */
+#define _PAGE_ACCESSED              (1<<3)  /* implemented in software */
+#define _PAGE_MODIFIED              (1<<4)  /* implemented in software */
+#define _PAGE_FILE                  (1<<4)  /* set:pagecache unset:swap */
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _PAGE_GLOBAL                (1<<8)
+#define _PAGE_VALID                 (1<<9)
+#define _PAGE_SILENT_READ           (1<<9)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<10) /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<10)
+#define _CACHE_UNCACHED             (1<<11)
+#define _CACHE_MASK                 (1<<11)
+
+#else
+
+#define _PAGE_R4KBUG                (1<<5)  /* workaround for r4k bug  */
+#define _PAGE_GLOBAL                (1<<6)
+#define _PAGE_VALID                 (1<<7)
+#define _PAGE_SILENT_READ           (1<<7)  /* synonym                 */
+#define _PAGE_DIRTY                 (1<<8)  /* The MIPS dirty bit      */
+#define _PAGE_SILENT_WRITE          (1<<8)
+#define _CACHE_SHIFT		    9
+#define _CACHE_MASK                 (7<<9)
+
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
+
+
+/*
+ * Cache attributes
+ */
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _CACHE_CACHABLE_NONCOHERENT 0
+
+#elif defined(CONFIG_CPU_SB1)
+
+/* No penalty for being coherent on the SB1, so just
+   use it for "noncoherent" spaces, too.  Shouldn't hurt. */
+
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define _CACHE_WT		    (0<<_CACHE_SHIFT)
+#define _CACHE_WTWA		    (1<<_CACHE_SHIFT)
+#define _CACHE_UC_B		    (2<<_CACHE_SHIFT)
+#define _CACHE_WB		    (3<<_CACHE_SHIFT)
+#define _CACHE_CWBEA		    (4<<_CACHE_SHIFT)
+#define _CACHE_CWB		    (5<<_CACHE_SHIFT)
+#define _CACHE_UCNB		    (6<<_CACHE_SHIFT)
+#define _CACHE_FPC		    (7<<_CACHE_SHIFT)
+
+#define _CACHE_UNCACHED		    _CACHE_UC_B
+#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB
+
+#else
+
+#define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only      */
+#define _CACHE_CACHABLE_WA	    (1<<_CACHE_SHIFT)  /* R4600 only      */
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* R4[0246]00      */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* R4[0246]00      */
+#define _CACHE_CACHABLE_CE          (4<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COHERENT    (5<<_CACHE_SHIFT)  /* MIPS32R2 CMP    */
+#define _CACHE_CACHABLE_CUW         (6<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* R10000 only     */
+
+#endif
+
+#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+
+#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
new file mode 100644
index 0000000..6a0edf7
--- /dev/null
+++ b/arch/mips/include/asm/pgtable.h
@@ -0,0 +1,383 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#ifdef CONFIG_32BIT
+#include <asm/pgtable-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/pgtable-64.h>
+#endif
+
+#include <asm/io.h>
+#include <asm/pgtable-bits.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _page_cachable_default)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+				 _page_cachable_default)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+				 _page_cachable_default)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+				 _PAGE_GLOBAL | _page_cachable_default)
+#define PAGE_USERIO	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _page_cachable_default)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+			__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
+
+/*
+ * MIPS can't do page protection for execute, and considers that the same like
+ * read. Also, write permissions imply read permissions. This is the closest
+ * we can get by reasonable means..
+ */
+
+/*
+ * Dummy values to fill the table in mmap.c
+ * The real values will be generated at runtime
+ */
+#define __P000 __pgprot(0)
+#define __P001 __pgprot(0)
+#define __P010 __pgprot(0)
+#define __P011 __pgprot(0)
+#define __P100 __pgprot(0)
+#define __P101 __pgprot(0)
+#define __P110 __pgprot(0)
+#define __P111 __pgprot(0)
+
+#define __S000 __pgprot(0)
+#define __S001 __pgprot(0)
+#define __S010 __pgprot(0)
+#define __S011 __pgprot(0)
+#define __S100 __pgprot(0)
+#define __S101 __pgprot(0)
+#define __S110 __pgprot(0)
+#define __S111 __pgprot(0)
+
+extern unsigned long _page_cachable_default;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero; used
+ * for zero-mapped memory areas etc..
+ */
+
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+#define ZERO_PAGE(vaddr) \
+	(virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask))))
+
+extern void paging_init(void);
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define pmd_phys(pmd)		virt_to_phys((void *)pmd_val(pmd))
+#define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	((pte).pte_low & _PAGE_PRESENT)
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+	//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
+
+	if (pte.pte_low & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy)) {
+			buddy->pte_low  |= _PAGE_GLOBAL;
+			buddy->pte_high |= _PAGE_GLOBAL;
+		}
+	}
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t null = __pte(0);
+
+	/* Preserve global status for the pair */
+	if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+		null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+	set_pte_at(mm, addr, ptep, null);
+}
+#else
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/*
+ * Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	*ptep = pteval;
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	if (pte_val(pteval) & _PAGE_GLOBAL) {
+		pte_t *buddy = ptep_buddy(ptep);
+		/*
+		 * Make sure the buddy is global too (if it's !none,
+		 * it better already be global)
+		 */
+		if (pte_none(*buddy))
+			pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+	}
+#endif
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+	/* Preserve global status for the pair */
+	if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
+		set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
+	else
+#endif
+		set_pte_at(mm, addr, ptep, __pte(0));
+}
+#endif
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
+
+#ifdef CONFIG_64BIT
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+#endif
+
+#define PGD_T_LOG2	(__builtin_ffs(sizeof(pgd_t)) - 1)
+#define PMD_T_LOG2	(__builtin_ffs(sizeof(pmd_t)) - 1)
+#define PTE_T_LOG2	(__builtin_ffs(sizeof(pte_t)) - 1)
+
+/*
+ * We used to declare this array with size but gcc 3.3 and older are not able
+ * to find that this expression is a constant, so the size is dropped.
+ */
+extern pgd_t swapper_pg_dir[];
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte.pte_low & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte.pte_low  &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+	pte.pte_high &= ~_PAGE_SILENT_READ;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte.pte_low |= _PAGE_WRITE;
+	if (pte.pte_low & _PAGE_MODIFIED) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte.pte_low |= _PAGE_MODIFIED;
+	if (pte.pte_low & _PAGE_WRITE) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
+	}
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte.pte_low |= _PAGE_ACCESSED;
+	if (pte.pte_low & _PAGE_READ) {
+		pte.pte_low  |= _PAGE_SILENT_READ;
+		pte.pte_high |= _PAGE_SILENT_READ;
+	}
+	return pte;
+}
+#else
+static inline int pte_write(pte_t pte)	{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+#endif
+static inline int pte_special(pte_t pte)	{ return 0; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/*
+ * Macro to make mark a page protection value as "uncacheable".  Note
+ * that "protection" is really a misnomer here as the protection value
+ * contains the memory attribute bits, dirty bits, and various other
+ * bits as well.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+
+	return __pgprot(prot);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low  &= _PAGE_CHG_MASK;
+	pte.pte_high &= ~0x3f;
+	pte.pte_low  |= pgprot_val(newprot);
+	pte.pte_high |= pgprot_val(newprot) & 0x3f;
+	return pte;
+}
+#else
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+#endif
+
+
+extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
+	pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t pte)
+{
+	__update_tlb(vma, address, pte);
+	__update_cache(vma, address, pte);
+}
+
+#define kern_addr_valid(addr)	(1)
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+		unsigned long vaddr,
+		unsigned long pfn,
+		unsigned long size,
+		pgprot_t prot)
+{
+	phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+	return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own get_unmapped area to cope with the virtual aliasing
+ * constraints placed on us by the cache architecture.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
new file mode 100644
index 0000000..ebdbab9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-mips/pmc-sierra/msp71xx/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#ifndef __PMC_MSP71XX_GPIO_H
+#define __PMC_MSP71XX_GPIO_H
+
+/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
+#define ARCH_NR_GPIOS (28 + (3 * 8))
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/* Setup calls for the gpio and gpio extended */
+extern void msp71xx_init_gpio(void);
+extern void msp71xx_init_gpio_extended(void);
+extern int msp71xx_set_output_drive(unsigned gpio, int value);
+
+/* Custom output drive functionss */
+static inline int gpio_set_output_drive(unsigned gpio, int value)
+{
+	return msp71xx_set_output_drive(gpio, value);
+}
+
+/* IRQ's are not supported for gpio lines */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+#endif /* __PMC_MSP71XX_GPIO_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
new file mode 100644
index 0000000..c84bcf9
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
@@ -0,0 +1,151 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_CIC_INT_H
+#define _MSP_CIC_INT_H
+
+/*
+ * The PMC-Sierra CIC interrupts are all centrally managed by the
+ * CIC sub-system.
+ * We attempt to keep the interrupt numbers as consistent as possible
+ * across all of the MSP devices, but some differences will creep in ...
+ * The interrupts which are directly forwarded to the MIPS core interrupts
+ * are assigned interrupts in the range 0-7, interrupts cascaded through
+ * the CIC are assigned interrupts 8-39.  The cascade occurs on C_IRQ4
+ * (MSP_INT_CIC).  Currently we don't really distinguish between VPE1
+ * and VPE0 (or thread contexts for that matter).  Will have to fix.
+ * The PER interrupts are assigned interrupts in the range 40-71.
+*/
+
+
+/*
+ * IRQs directly forwarded to the CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0	/* IRQ for swint0,       C_SW0  */
+#define MSP_INT_SW1		1	/* IRQ for swint1,       C_SW1  */
+#define MSP_INT_MAC0		2	/* IRQ for MAC 0,        C_IRQ0 */
+#define MSP_INT_MAC1		3	/* IRQ for MAC 1,        C_IRQ1 */
+#define MSP_INT_USB		4	/* IRQ for USB,          C_IRQ2 */
+#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,   C_IRQ3 */
+#define MSP_INT_CIC		6	/* IRQ for CIC block,    C_IRQ4 */
+#define MSP_INT_SEC		7	/* IRQ for Sec engine,   C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definitions for the CIC
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
+					/* External interrupt 3         */
+#define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
+					/* CPU interface interrupt      */
+#define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
+					/* External interrupt 4         */
+#define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
+					/* Cascaded IRQ for USB         */
+#define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
+					/* Sec engine mailbox IRQ       */
+#define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
+					/* External interrupt 5         */
+#define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
+					/* Cascaded IRQ for sec engine  */
+#define	MSP_INT_PER		(MSP_CIC_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
+					/* VPE0 MIPS timer              */
+#define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
+					/* External interrupt 5         */
+#define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
+					/* Cascaded ADSL2+ SAR IRQ      */
+#define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
+					/* ADSL2+ IRQ                   */
+#define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
+					/* VPE1 MIPS timer              */
+#define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
+					/* VPE0 Performance counter     */
+#define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
+					/* VPE1 Performance counter     */
+#define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
+					/* External interrupt 5         */
+#define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
+					/* VPE0 Software interrupt      */
+#define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
+					/* VPE0 Software interrupt      */
+
+/*
+ * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
new file mode 100644
index 0000000..1d9f054
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
@@ -0,0 +1,43 @@
+/*
+ * Defines for the MSP interrupt handlers.
+ *
+ * Copyright (C) 2005, PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_INT_H
+#define _MSP_INT_H
+
+/*
+ * The PMC-Sierra MSP product line has at least two different interrupt
+ * controllers, the SLP register based scheme and the CIC interrupt
+ * controller block mechanism.  This file distinguishes between them
+ * so that devices see a uniform interface.
+ */
+
+#if defined(CONFIG_IRQ_MSP_SLP)
+	#include "msp_slp_int.h"
+#elif defined(CONFIG_IRQ_MSP_CIC)
+	#include "msp_cic_int.h"
+#else
+	#error "What sort of interrupt controller does *your* MSP have?"
+#endif
+
+#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 0000000..4156069
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ *     This program is free software; you can redistribute it
+ *     and/or modify it under the terms of the GNU General
+ *     Public License as published by the Free Software
+ *     Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     This program is distributed in the hope that it will be
+ *     useful, but WITHOUT ANY WARRANTY; without even the implied
+ *     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *     PURPOSE.  See the GNU General Public License for more
+ *     details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this program; if not, write to the Free
+ *     Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ *     02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID)	(((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ *    - Michael Penner
+ */
+#define MSP_PCI_OATRAN		0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE	(MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE	(0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+		(MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE	(MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE	0x1000
+#define MSP_PCI_IOSPACE_END  \
+		(MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ	20
+
+#define QFLUSH_REG_1	0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+    pcireg   unused1; /* +0x00 */
+    pcireg   unused2; /* +0x04 */
+    ppcireg  unused3; /* +0x08 */
+    ppcireg  unused4; /* +0x0C */
+    pcireg   unused5; /* +0x10 */
+    pcireg   unused6; /* +0x14 */
+    pcireg   unused7; /* +0x18 */
+    ppcireg  unused8; /* +0x1C */
+    ppcireg  unused9; /* +0x20 */
+    pcireg   unusedA; /* +0x24 */
+    ppcireg  unusedB; /* +0x28 */
+    ppcireg  unusedC; /* +0x2C */
+};
+
+enum
+{
+    config_device_vendor,  /* 0 */
+    config_status_command, /* 1 */
+    config_class_revision, /* 2 */
+    config_BIST_header_latency_cache, /* 3 */
+    config_BAR0,           /* 4 */
+    config_BAR1,           /* 5 */
+    config_BAR2,           /* 6 */
+    config_not_used7,      /* 7 */
+    config_not_used8,      /* 8 */
+    config_not_used9,      /* 9 */
+    config_CIS,            /* 10 */
+    config_subsystem,      /* 11 */
+    config_not_used12,     /* 12 */
+    config_capabilities,   /* 13 */
+    config_not_used14,     /* 14 */
+    config_lat_grant_irq,  /* 15 */
+    config_message_control,/* 16 */
+    config_message_addr,   /* 17 */
+    config_message_data,   /* 18 */
+    config_VPD_addr,       /* 19 */
+    config_VPD_data,       /* 20 */
+    config_maxregs         /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+    pcireg hop_unused_00; /* +0x00 */
+    pcireg hop_unused_04; /* +0x04 */
+    pcireg hop_unused_08; /* +0x08 */
+    pcireg hop_unused_0C; /* +0x0C */
+    pcireg hop_unused_10; /* +0x10 */
+    pcireg hop_unused_14; /* +0x14 */
+    pcireg hop_unused_18; /* +0x18 */
+    pcireg hop_unused_1C; /* +0x1C */
+    pcireg hop_unused_20; /* +0x20 */
+    pcireg hop_unused_24; /* +0x24 */
+    pcireg hop_unused_28; /* +0x28 */
+    pcireg hop_unused_2C; /* +0x2C */
+    pcireg hop_unused_30; /* +0x30 */
+    pcireg hop_unused_34; /* +0x34 */
+    pcireg if_control;    /* +0x38 */
+    pcireg oatran;        /* +0x3C */
+    pcireg reset_ctl;     /* +0x40 */
+    pcireg config_addr;   /* +0x44 */
+    pcireg hop_unused_48; /* +0x48 */
+    pcireg msg_signaled_int_status; /* +0x4C */
+    pcireg msg_signaled_int_mask;   /* +0x50 */
+    pcireg if_status;     /* +0x54 */
+    pcireg if_mask;       /* +0x58 */
+    pcireg hop_unused_5C; /* +0x5C */
+    pcireg hop_unused_60; /* +0x60 */
+    pcireg hop_unused_64; /* +0x64 */
+    pcireg hop_unused_68; /* +0x68 */
+    pcireg hop_unused_6C; /* +0x6C */
+    pcireg hop_unused_70; /* +0x70 */
+
+    struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+    pcireg error_hdr1; /* +0xE0 */
+    pcireg error_hdr2; /* +0xE4 */
+
+    pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12  /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE  (1<<5)  /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3)  /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0   /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT  (1<<8)  /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT  (1<<9)  /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT  (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO  (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER  (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER  (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA  (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM  (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB  (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA  (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA   (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA   (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+			__attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+			__attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
new file mode 100644
index 0000000..14ca7dc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -0,0 +1,176 @@
+/*
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _ASM_MSP_PROM_H
+#define _ASM_MSP_PROM_H
+
+#include <linux/types.h>
+
+#define DEVICEID			"deviceid"
+#define FEATURES			"features"
+#define PROM_ENV			"prom_env"
+#define PROM_ENV_FILE			"/proc/"PROM_ENV
+#define PROM_ENV_SIZE			256
+
+#define CPU_DEVID_FAMILY		0x0000ff00
+#define CPU_DEVID_REVISION		0x000000ff
+
+#define FPGA_IS_POLO(revision) \
+		(((revision >= 0xb0) && (revision < 0xd0)))
+#define FPGA_IS_5000(revision) \
+		((revision >= 0x80) && (revision <= 0x90))
+#define	FPGA_IS_ZEUS(revision)		((revision < 0x7f))
+#define FPGA_IS_DUET(revision) \
+		(((revision >= 0xa0) && (revision < 0xb0)))
+#define FPGA_IS_MSP4200(revision)	((revision >= 0xd0))
+#define FPGA_IS_MSP7100(revision)	((revision >= 0xd0))
+
+#define MACHINE_TYPE_POLO		"POLO"
+#define MACHINE_TYPE_DUET		"DUET"
+#define	MACHINE_TYPE_ZEUS		"ZEUS"
+#define MACHINE_TYPE_MSP2000REVB	"MSP2000REVB"
+#define MACHINE_TYPE_MSP5000		"MSP5000"
+#define MACHINE_TYPE_MSP4200		"MSP4200"
+#define MACHINE_TYPE_MSP7120		"MSP7120"
+#define MACHINE_TYPE_MSP7130		"MSP7130"
+#define MACHINE_TYPE_OTHER		"OTHER"
+
+#define MACHINE_TYPE_POLO_FPGA		"POLO-FPGA"
+#define MACHINE_TYPE_DUET_FPGA		"DUET-FPGA"
+#define	MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
+#define MACHINE_TYPE_MSP2000REVB_FPGA	"MSP2000REVB-FPGA"
+#define MACHINE_TYPE_MSP5000_FPGA	"MSP5000-FPGA"
+#define MACHINE_TYPE_MSP4200_FPGA	"MSP4200-FPGA"
+#define MACHINE_TYPE_MSP7100_FPGA	"MSP7100-FPGA"
+#define MACHINE_TYPE_OTHER_FPGA		"OTHER-FPGA"
+
+/* Device Family definitions */
+#define FAMILY_FPGA			0x0000
+#define FAMILY_ZEUS			0x1000
+#define FAMILY_POLO			0x2000
+#define FAMILY_DUET			0x4000
+#define FAMILY_TRIAD			0x5000
+#define FAMILY_MSP4200			0x4200
+#define FAMILY_MSP4200_FPGA		0x4f00
+#define FAMILY_MSP7100			0x7100
+#define FAMILY_MSP7100_FPGA		0x7f00
+
+/* Device Type definitions */
+#define TYPE_MSP7120			0x7120
+#define TYPE_MSP7130			0x7130
+
+#define ENET_KEY		'E'
+#define ENETTXD_KEY		'e'
+#define PCI_KEY			'P'
+#define PCIMUX_KEY		'p'
+#define SEC_KEY			'S'
+#define SPAD_KEY		'D'
+#define TDM_KEY			'T'
+#define ZSP_KEY			'Z'
+
+#define FEATURE_NOEXIST		'-'
+#define FEATURE_EXIST		'+'
+
+#define ENET_MII		'M'
+#define ENET_RMII		'R'
+
+#define	ENETTXD_FALLING		'F'
+#define ENETTXD_RISING		'R'
+
+#define PCI_HOST		'H'
+#define PCI_PERIPHERAL		'P'
+
+#define PCIMUX_FULL		'F'
+#define PCIMUX_SINGLE		'S'
+
+#define SEC_DUET		'D'
+#define SEC_POLO		'P'
+#define SEC_SLOW		'S'
+#define SEC_TRIAD		'T'
+
+#define SPAD_POLO		'P'
+
+#define TDM_DUET		'D'	/* DUET TDMs might exist */
+#define TDM_POLO		'P'	/* POLO TDMs might exist */
+#define TDM_TRIAD		'T'	/* TRIAD TDMs might exist */
+
+#define ZSP_DUET		'D'	/* one DUET zsp engine */
+#define ZSP_TRIAD		'T'	/* two TRIAD zsp engines */
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem,
+			       unsigned long end_mem);
+
+#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
+extern bool get_ramroot(void **start, unsigned long *size);
+#endif
+
+extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
+extern unsigned long get_deviceid(void);
+extern char identify_enet(unsigned long interface_num);
+extern char identify_enetTxD(unsigned long interface_num);
+extern char identify_pci(void);
+extern char identify_sec(void);
+extern char identify_spad(void);
+extern char identify_sec(void);
+extern char identify_tdm(void);
+extern char identify_zsp(void);
+extern unsigned long identify_family(void);
+extern unsigned long identify_revision(void);
+
+/*
+ * The following macro calls prom_printf and puts the format string
+ * into an init section so it can be reclaimed.
+ */
+#define ppfinit(f, x...) \
+	do { \
+		static char _f[] __initdata = KERN_INFO f; \
+		printk(_f, ## x); \
+	} while (0)
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    7	/* 6 used */
+
+enum yamon_memtypes {
+	yamon_dontuse,
+	yamon_prom,
+	yamon_free,
+};
+
+struct prom_pmemblock {
+	unsigned long base; /* Within KSEG0. */
+	unsigned int size;  /* In bytes. */
+	unsigned int type;  /* free or prom memory */
+};
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+extern int *prom_vec;
+extern struct prom_pmemblock *prom_getmdesc(void);
+
+#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
new file mode 100644
index 0000000..60a5a38
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
@@ -0,0 +1,236 @@
+/*
+ * SMP/VPE-safe functions to access "registers" (see note).
+ *
+ * NOTES:
+* - These macros use ll/sc instructions, so it is your responsibility to
+ * ensure these are available on your platform before including this file.
+ * - The MIPS32 spec states that ll/sc results are undefined for uncached
+ * accesses. This means they can't be used on HW registers accessed
+ * through kseg1. Code which requires these macros for this purpose must
+ * front-end the registers with cached memory "registers" and have a single
+ * thread update the actual HW registers.
+ * - A maximum of 2k of code can be inserted between ll and sc. Every
+ * memory accesses between the instructions will increase the chance of
+ * sc failing and having to loop.
+ * - When using custom_read_reg32/custom_write_reg32 only perform the
+ * necessary logical operations on the register value in between these
+ * two calls. All other logic should be performed before the first call.
+  * - There is a bug on the R10000 chips which has a workaround. If you
+ * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
+ * to be non-zero.  If you are using this header from within linux, you may
+ * include <asm/war.h> before including this file to have this defined
+ * appropriately for you.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+ *  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF USE,
+ *  DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc., 675
+ *  Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_REGOPS_H__
+#define __ASM_REGOPS_H__
+
+#include <linux/types.h>
+
+#include <asm/war.h>
+
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR 0
+#endif
+
+#if R10000_LLSC_WAR == 1
+#define __beqz	"beqzl	"
+#else
+#define __beqz	"beqz	"
+#endif
+
+#ifndef _LINUX_TYPES_H
+typedef unsigned int u32;
+#endif
+
+/*
+ * Sets all the masked bits to the corresponding value bits
+ */
+static inline void set_value_reg32(volatile u32 *const addr,
+					u32 const mask,
+					u32 const value)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1	# set_value_reg32	\n"
+	"	and	%0, %2				\n"
+	"	or	%0, %3				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "ir" (value), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '1'
+ */
+static inline void set_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# set_reg32	\n"
+	"	or	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '0'
+ */
+static inline void clear_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# clear_reg32	\n"
+	"	and	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (~mask), "m" (*addr));
+}
+
+/*
+ * Toggles all masked bits from '0' to '1' and '1' to '0'
+ */
+static inline void toggle_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	mips3				\n"
+	"1:	ll	%0, %1		# toggle_reg32	\n"
+	"	xor	%0, %2				\n"
+	"	sc	%0, %1				\n"
+	"	"__beqz"%0, 1b				\n"
+	"	nop					\n"
+	"	.set	pop				\n"
+	: "=&r" (temp), "=m" (*addr)
+	: "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Read all masked bits others are returned as '0'
+ */
+static inline u32 read_reg32(volatile u32 *const addr,
+				u32 const mask)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	and	%0, %2		# mask		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr), "ir" (mask));
+
+	return temp;
+}
+
+/*
+ * blocking_read_reg32 - Read address with blocking load
+ *
+ * Uncached writes need to be read back to ensure they reach RAM.
+ * The returned value must be 'used' to prevent from becoming a
+ * non-blocking load.
+ */
+static inline u32 blocking_read_reg32(volatile u32 *const addr)
+{
+	u32 temp;
+
+	__asm__ __volatile__(
+	"	.set	push				\n"
+	"	.set	noreorder			\n"
+	"	lw	%0, %1		# read		\n"
+	"	move	%0, %0		# block		\n"
+	"	.set	pop				\n"
+	: "=&r" (temp)
+	: "m" (*addr));
+
+	return temp;
+}
+
+/*
+ * For special strange cases only:
+ *
+ * If you need custom processing within a ll/sc loop, use the following macros
+ * VERY CAREFULLY:
+ *
+ *   u32 tmp;				<-- Define a variable to hold the data
+ *
+ *   custom_read_reg32(address, tmp);	<-- Reads the address and put the value
+ *						in the 'tmp' variable given
+ *
+ *	From here on out, you are (basicly) atomic, so don't do anything too
+ *	fancy!
+ *	Also, this code may loop if the end of this block fails to write
+ *	everything back safely due do the other CPU, so do NOT do anything
+ *	with side-effects!
+ *
+ *   custom_write_reg32(address, tmp);	<-- Writes back 'tmp' safely.
+ */
+#define custom_read_reg32(address, tmp)				\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"1:	ll	%0, %1	#custom_read_reg32	\n"	\
+	"	.set	pop				\n"	\
+	: "=r" (tmp), "=m" (*address)				\
+	: "m" (*address))
+
+#define custom_write_reg32(address, tmp)			\
+	__asm__ __volatile__(					\
+	"	.set	push				\n"	\
+	"	.set	mips3				\n"	\
+	"	sc	%0, %1	#custom_write_reg32	\n"	\
+	"	"__beqz"%0, 1b				\n"	\
+	"	nop					\n"	\
+	"	.set	pop				\n"	\
+	: "=&r" (tmp), "=m" (*address)				\
+	: "0" (tmp), "m" (*address))
+
+#endif  /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
new file mode 100644
index 0000000..603eb73
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
@@ -0,0 +1,663 @@
+/*
+ * Defines for the address space, registers and register configuration
+ * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
+ * This file contains addess maps for all the devices in the line of
+ * products but only has register definitions and configuration masks for
+ * registers which aren't definitely associated with any device.  Things
+ * like clock settings, reset access, the ELB etc.  Individual device
+ * drivers will reference the appropriate XXX_BASE value defined here
+ * and have individual registers offset from that.
+ *
+ * Copyright (C) 2005-2007 PMC-Sierra, Inc.  All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <asm/addrspace.h>
+#include <linux/types.h>
+
+#ifndef _ASM_MSP_REGS_H
+#define _ASM_MSP_REGS_H
+
+/*
+ ########################################################################
+ #  Address space and device base definitions                           #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (ELB, UART0, etc) device address space     *
+ ***************************************************************************
+ */
+#define MSP_SLP_BASE		0x1c000000
+					/* System Logic and Peripherals */
+#define MSP_RST_BASE		(MSP_SLP_BASE + 0x10)
+					/* System reset register base	*/
+#define MSP_RST_SIZE		0x0C	/* System reset register space	*/
+
+#define MSP_WTIMER_BASE		(MSP_SLP_BASE + 0x04C)
+					/* watchdog timer base          */
+#define MSP_ITIMER_BASE		(MSP_SLP_BASE + 0x054)
+					/* internal timer base          */
+#define MSP_UART0_BASE		(MSP_SLP_BASE + 0x100)
+					/* UART0 controller base        */
+#define MSP_BCPY_CTRL_BASE	(MSP_SLP_BASE + 0x120)
+					/* Block Copy controller base   */
+#define MSP_BCPY_DESC_BASE	(MSP_SLP_BASE + 0x160)
+					/* Block Copy descriptor base   */
+
+/*
+ ***************************************************************************
+ * PCI address space                                                       *
+ ***************************************************************************
+ */
+#define MSP_PCI_BASE		0x19000000
+
+/*
+ ***************************************************************************
+ * MSbus device address space                                              *
+ ***************************************************************************
+ */
+#define MSP_MSB_BASE		0x18000000
+					/* MSbus address start          */
+#define MSP_PER_BASE		(MSP_MSB_BASE + 0x400000)
+					/* Peripheral device registers  */
+#define MSP_MAC0_BASE		(MSP_MSB_BASE + 0x600000)
+					/* MAC A device registers       */
+#define MSP_MAC1_BASE		(MSP_MSB_BASE + 0x700000)
+					/* MAC B device registers       */
+#define MSP_MAC_SIZE		0xE0	/* MAC register space		*/
+
+#define MSP_SEC_BASE		(MSP_MSB_BASE + 0x800000)
+					/* Security Engine registers    */
+#define MSP_MAC2_BASE		(MSP_MSB_BASE + 0x900000)
+					/* MAC C device registers       */
+#define MSP_ADSL2_BASE		(MSP_MSB_BASE + 0xA80000)
+					/* ADSL2 device registers       */
+#define MSP_USB_BASE		(MSP_MSB_BASE + 0xB40000)
+					/* USB device registers         */
+#define MSP_USB_BASE_START	(MSP_MSB_BASE + 0xB40100)
+					/* USB device registers         */
+#define MSP_USB_BASE_END	(MSP_MSB_BASE + 0xB401FF)
+					/* USB device registers         */
+#define MSP_CPUIF_BASE		(MSP_MSB_BASE + 0xC00000)
+					/* CPU interface registers      */
+
+/* Devices within the MSbus peripheral block */
+#define MSP_UART1_BASE		(MSP_PER_BASE + 0x030)
+					/* UART1 controller base        */
+#define MSP_SPI_BASE		(MSP_PER_BASE + 0x058)
+					/* SPI/MPI control registers    */
+#define MSP_TWI_BASE		(MSP_PER_BASE + 0x090)
+					/* Two-wire control registers   */
+#define MSP_PTIMER_BASE		(MSP_PER_BASE + 0x0F0)
+					/* Programmable timer control   */
+
+/*
+ ***************************************************************************
+ * Physical Memory configuration address space                             *
+ ***************************************************************************
+ */
+#define MSP_MEM_CFG_BASE	0x17f00000
+
+#define MSP_MEM_INDIRECT_CTL_10	0x10
+
+/*
+ * Notes:
+ *  1) The SPI registers are split into two blocks, one offset from the
+ *     MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
+ *     0x68.  The SPI driver definitions for the register must be aware
+ *     of this.
+ *  2) The block copy engine register are divided into two regions, one
+ *     for the control/configuration of the engine proper and one for the
+ *     values of the descriptors used in the copy process.  These have
+ *     different base defines (CTRL_BASE vs DESC_BASE)
+ *  3) These constants are for physical addresses which means that they
+ *     work correctly with "ioremap" and friends.  This means that device
+ *     drivers will need to remap these addresses using ioremap and perhaps
+ *     the readw/writew macros.  Or they could use the regptr() macro
+ *     defined below, but the readw/writew calls are the correct thing.
+ *  4) The UARTs have an additional status register offset from the base
+ *     address.  This register isn't used in the standard 8250 driver but
+ *     may be used in other software.  Consult the hardware datasheet for
+ *     offset details.
+ *  5) For some unknown reason the security engine (MSP_SEC_BASE) registers
+ *     start at an offset of 0x84 from the base address but the block of
+ *     registers before this is reserved for the security engine.  The
+ *     driver will have to be aware of this but it makes the register
+ *     definitions line up better with the documentation.
+ */
+
+/*
+ ########################################################################
+ #  System register definitions.  Not associated with a specific device #
+ ########################################################################
+ */
+
+/*
+ * This macro maps the physical register number into uncached space
+ * and (for C code) casts it into a u32 pointer so it can be dereferenced
+ * Normally these would be accessed with ioremap and readX/writeX, but
+ * these are convenient for a lot of internal kernel code.
+ */
+#ifdef __ASSEMBLER__
+	#define regptr(addr) (KSEG1ADDR(addr))
+#else
+	#define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
+#endif
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (RESET, ELB, etc) registers                *
+ ***************************************************************************
+ */
+
+/* System Control register definitions */
+#define	DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
+					/* Device-ID                 RO */
+#define	FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
+					/* Firmware-ID Register      RW */
+#define	SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
+					/* System-ID Register-0      RW */
+#define	SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
+					/* System-ID Register-1      RW */
+
+/* System Reset register definitions */
+#define	RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
+					/* System Reset Status       RO */
+#define	RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
+					/* System Set Reset          WO */
+#define	RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
+					/* System Clear Reset        WO */
+
+/* System Clock Registers */
+#define PCI_SLP_REG	regptr(MSP_SLP_BASE + 0x1C)
+					/* PCI clock generator       RW */
+#define URT_SLP_REG	regptr(MSP_SLP_BASE + 0x20)
+					/* UART clock generator      RW */
+/* reserved		      (MSP_SLP_BASE + 0x24)                     */
+/* reserved		      (MSP_SLP_BASE + 0x28)                     */
+#define PLL1_SLP_REG	regptr(MSP_SLP_BASE + 0x2C)
+					/* PLL1 clock generator      RW */
+#define PLL0_SLP_REG	regptr(MSP_SLP_BASE + 0x30)
+					/* PLL0 clock generator      RW */
+#define MIPS_SLP_REG	regptr(MSP_SLP_BASE + 0x34)
+					/* MIPS clock generator      RW */
+#define	VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
+					/* Voice Eng clock generator RW */
+/* reserved		      (MSP_SLP_BASE + 0x3C)                     */
+#define MSB_SLP_REG	regptr(MSP_SLP_BASE + 0x40)
+					/* MS-Bus clock generator    RW */
+#define SMAC_SLP_REG	regptr(MSP_SLP_BASE + 0x44)
+					/* Sec & MAC clock generator RW */
+#define PERF_SLP_REG	regptr(MSP_SLP_BASE + 0x48)
+					/* Per & TDM clock generator RW */
+
+/* Interrupt Controller Registers */
+#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
+					/* Interrupt status register RW */
+#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
+					/* Interrupt enable/mask     RW */
+#define SE_MBOX_REG	regptr(MSP_SLP_BASE + 0x78)
+					/* Security Engine mailbox   RW */
+#define VE_MBOX_REG	regptr(MSP_SLP_BASE + 0x7C)
+					/* Voice Engine mailbox      RW */
+
+/* ELB Controller Registers */
+#define CS0_CNFG_REG	regptr(MSP_SLP_BASE + 0x80)
+					/* ELB CS0 Configuration Reg    */
+#define CS0_ADDR_REG	regptr(MSP_SLP_BASE + 0x84)
+					/* ELB CS0 Base Address Reg     */
+#define CS0_MASK_REG	regptr(MSP_SLP_BASE + 0x88)
+					/* ELB CS0 Mask Register        */
+#define CS0_ACCESS_REG	regptr(MSP_SLP_BASE + 0x8C)
+					/* ELB CS0 access register      */
+
+#define CS1_CNFG_REG	regptr(MSP_SLP_BASE + 0x90)
+					/* ELB CS1 Configuration Reg    */
+#define CS1_ADDR_REG	regptr(MSP_SLP_BASE + 0x94)
+					/* ELB CS1 Base Address Reg     */
+#define CS1_MASK_REG	regptr(MSP_SLP_BASE + 0x98)
+					/* ELB CS1 Mask Register        */
+#define CS1_ACCESS_REG	regptr(MSP_SLP_BASE + 0x9C)
+					/* ELB CS1 access register      */
+
+#define CS2_CNFG_REG	regptr(MSP_SLP_BASE + 0xA0)
+					/* ELB CS2 Configuration Reg    */
+#define CS2_ADDR_REG	regptr(MSP_SLP_BASE + 0xA4)
+					/* ELB CS2 Base Address Reg     */
+#define CS2_MASK_REG	regptr(MSP_SLP_BASE + 0xA8)
+					/* ELB CS2 Mask Register        */
+#define CS2_ACCESS_REG	regptr(MSP_SLP_BASE + 0xAC)
+					/* ELB CS2 access register      */
+
+#define CS3_CNFG_REG	regptr(MSP_SLP_BASE + 0xB0)
+					/* ELB CS3 Configuration Reg    */
+#define CS3_ADDR_REG	regptr(MSP_SLP_BASE + 0xB4)
+					/* ELB CS3 Base Address Reg     */
+#define CS3_MASK_REG	regptr(MSP_SLP_BASE + 0xB8)
+					/* ELB CS3 Mask Register        */
+#define CS3_ACCESS_REG	regptr(MSP_SLP_BASE + 0xBC)
+					/* ELB CS3 access register      */
+
+#define CS4_CNFG_REG	regptr(MSP_SLP_BASE + 0xC0)
+					/* ELB CS4 Configuration Reg    */
+#define CS4_ADDR_REG	regptr(MSP_SLP_BASE + 0xC4)
+					/* ELB CS4 Base Address Reg     */
+#define CS4_MASK_REG	regptr(MSP_SLP_BASE + 0xC8)
+					/* ELB CS4 Mask Register        */
+#define CS4_ACCESS_REG	regptr(MSP_SLP_BASE + 0xCC)
+					/* ELB CS4 access register      */
+
+#define CS5_CNFG_REG	regptr(MSP_SLP_BASE + 0xD0)
+					/* ELB CS5 Configuration Reg    */
+#define CS5_ADDR_REG	regptr(MSP_SLP_BASE + 0xD4)
+					/* ELB CS5 Base Address Reg     */
+#define CS5_MASK_REG	regptr(MSP_SLP_BASE + 0xD8)
+					/* ELB CS5 Mask Register        */
+#define CS5_ACCESS_REG	regptr(MSP_SLP_BASE + 0xDC)
+					/* ELB CS5 access register      */
+
+/* reserved			       0xE0 - 0xE8                      */
+#define ELB_1PC_EN_REG	regptr(MSP_SLP_BASE + 0xEC)
+					/* ELB single PC card detect    */
+
+/* reserved			       0xF0 - 0xF8                      */
+#define ELB_CLK_CFG_REG	regptr(MSP_SLP_BASE + 0xFC)
+					/* SDRAM read/ELB timing Reg    */
+
+/* Extended UART status registers */
+#define UART0_STATUS_REG	regptr(MSP_UART0_BASE + 0x0c0)
+					/* UART Status Register 0       */
+#define UART1_STATUS_REG	regptr(MSP_UART1_BASE + 0x170)
+					/* UART Status Register 1       */
+
+/* Performance monitoring registers */
+#define PERF_MON_CTRL_REG	regptr(MSP_SLP_BASE + 0x140)
+					/* Performance monitor control  */
+#define PERF_MON_CLR_REG	regptr(MSP_SLP_BASE + 0x144)
+					/* Performance monitor clear    */
+#define PERF_MON_CNTH_REG	regptr(MSP_SLP_BASE + 0x148)
+					/* Perf monitor counter high    */
+#define PERF_MON_CNTL_REG	regptr(MSP_SLP_BASE + 0x14C)
+					/* Perf monitor counter low     */
+
+/* System control registers */
+#define SYS_CTRL_REG		regptr(MSP_SLP_BASE + 0x150)
+					/* System control register      */
+#define SYS_ERR1_REG		regptr(MSP_SLP_BASE + 0x154)
+					/* System Error status 1        */
+#define SYS_ERR2_REG		regptr(MSP_SLP_BASE + 0x158)
+					/* System Error status 2        */
+#define SYS_INT_CFG_REG		regptr(MSP_SLP_BASE + 0x15C)
+					/* System Interrupt config      */
+
+/* Voice Engine Memory configuration */
+#define VE_MEM_REG		regptr(MSP_SLP_BASE + 0x17C)
+					/* Voice engine memory config   */
+
+/* CPU/SLP Error Status registers */
+#define CPU_ERR1_REG		regptr(MSP_SLP_BASE + 0x180)
+					/* CPU/SLP Error status 1       */
+#define CPU_ERR2_REG		regptr(MSP_SLP_BASE + 0x184)
+					/* CPU/SLP Error status 1       */
+
+#define EXTENDED_GPIO_REG	regptr(MSP_SLP_BASE + 0x188)
+					/* Extended GPIO register       */
+
+/* System Error registers */
+#define SLP_ERR_STS_REG		regptr(MSP_SLP_BASE + 0x190)
+					/* Int status for SLP errors    */
+#define SLP_ERR_MSK_REG		regptr(MSP_SLP_BASE + 0x194)
+					/* Int mask for SLP errors      */
+#define SLP_ELB_ERST_REG	regptr(MSP_SLP_BASE + 0x198)
+					/* External ELB reset           */
+#define SLP_BOOT_STS_REG	regptr(MSP_SLP_BASE + 0x19C)
+					/* Boot Status                  */
+
+/* Extended ELB addressing */
+#define CS0_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A0)
+					/* CS0 Extended address         */
+#define CS1_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A4)
+					/* CS1 Extended address         */
+#define CS2_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A8)
+					/* CS2 Extended address         */
+#define CS3_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1AC)
+					/* CS3 Extended address         */
+/* reserved					      0x1B0             */
+#define CS5_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1B4)
+					/* CS5 Extended address         */
+
+/* PLL Adjustment registers */
+#define PLL_LOCK_REG		regptr(MSP_SLP_BASE + 0x200)
+					/* PLL0 lock status             */
+#define PLL_ARST_REG		regptr(MSP_SLP_BASE + 0x204)
+					/* PLL Analog reset status      */
+#define PLL0_ADJ_REG		regptr(MSP_SLP_BASE + 0x208)
+					/* PLL0 Adjustment value        */
+#define PLL1_ADJ_REG		regptr(MSP_SLP_BASE + 0x20C)
+					/* PLL1 Adjustment value        */
+
+/*
+ ***************************************************************************
+ * Peripheral Register definitions                                         *
+ ***************************************************************************
+ */
+
+/* Peripheral status */
+#define PER_CTRL_REG		regptr(MSP_PER_BASE + 0x50)
+					/* Peripheral control register  */
+#define PER_STS_REG		regptr(MSP_PER_BASE + 0x54)
+					/* Peripheral status register   */
+
+/* SPI/MPI Registers */
+#define SMPI_TX_SZ_REG		regptr(MSP_PER_BASE + 0x58)
+					/* SPI/MPI Tx Size register     */
+#define SMPI_RX_SZ_REG		regptr(MSP_PER_BASE + 0x5C)
+					/* SPI/MPI Rx Size register     */
+#define SMPI_CTL_REG		regptr(MSP_PER_BASE + 0x60)
+					/* SPI/MPI Control register     */
+#define SMPI_MS_REG		regptr(MSP_PER_BASE + 0x64)
+					/* SPI/MPI Chip Select reg      */
+#define SMPI_CORE_DATA_REG	regptr(MSP_PER_BASE + 0xC0)
+					/* SPI/MPI Core Data reg        */
+#define SMPI_CORE_CTRL_REG	regptr(MSP_PER_BASE + 0xC4)
+					/* SPI/MPI Core Control reg     */
+#define SMPI_CORE_STAT_REG	regptr(MSP_PER_BASE + 0xC8)
+					/* SPI/MPI Core Status reg      */
+#define SMPI_CORE_SSEL_REG	regptr(MSP_PER_BASE + 0xCC)
+					/* SPI/MPI Core Ssel reg        */
+#define SMPI_FIFO_REG		regptr(MSP_PER_BASE + 0xD0)
+					/* SPI/MPI Data FIFO reg        */
+
+/* Peripheral Block Error Registers           */
+#define PER_ERR_STS_REG		regptr(MSP_PER_BASE + 0x70)
+					/* Error Bit Status Register    */
+#define PER_ERR_MSK_REG		regptr(MSP_PER_BASE + 0x74)
+					/* Error Bit Mask Register      */
+#define PER_HDR1_REG		regptr(MSP_PER_BASE + 0x78)
+					/* Error Header 1 Register      */
+#define PER_HDR2_REG		regptr(MSP_PER_BASE + 0x7C)
+					/* Error Header 2 Register      */
+
+/* Peripheral Block Interrupt Registers       */
+#define PER_INT_STS_REG		regptr(MSP_PER_BASE + 0x80)
+					/* Interrupt status register    */
+#define PER_INT_MSK_REG		regptr(MSP_PER_BASE + 0x84)
+					/* Interrupt Mask Register      */
+#define GPIO_INT_STS_REG	regptr(MSP_PER_BASE + 0x88)
+					/* GPIO interrupt status reg    */
+#define GPIO_INT_MSK_REG	regptr(MSP_PER_BASE + 0x8C)
+					/* GPIO interrupt MASK Reg      */
+
+/* POLO GPIO registers                        */
+#define POLO_GPIO_DAT1_REG	regptr(MSP_PER_BASE + 0x0E0)
+					/* Polo GPIO[8:0]  data reg     */
+#define POLO_GPIO_CFG1_REG	regptr(MSP_PER_BASE + 0x0E4)
+					/* Polo GPIO[7:0]  config reg   */
+#define POLO_GPIO_CFG2_REG	regptr(MSP_PER_BASE + 0x0E8)
+					/* Polo GPIO[15:8] config reg   */
+#define POLO_GPIO_OD1_REG	regptr(MSP_PER_BASE + 0x0EC)
+					/* Polo GPIO[31:0] output drive */
+#define POLO_GPIO_CFG3_REG	regptr(MSP_PER_BASE + 0x170)
+					/* Polo GPIO[23:16] config reg  */
+#define POLO_GPIO_DAT2_REG	regptr(MSP_PER_BASE + 0x174)
+					/* Polo GPIO[15:9]  data reg    */
+#define POLO_GPIO_DAT3_REG	regptr(MSP_PER_BASE + 0x178)
+					/* Polo GPIO[23:16]  data reg   */
+#define POLO_GPIO_DAT4_REG	regptr(MSP_PER_BASE + 0x17C)
+					/* Polo GPIO[31:24]  data reg   */
+#define POLO_GPIO_DAT5_REG	regptr(MSP_PER_BASE + 0x180)
+					/* Polo GPIO[39:32]  data reg   */
+#define POLO_GPIO_DAT6_REG	regptr(MSP_PER_BASE + 0x184)
+					/* Polo GPIO[47:40]  data reg   */
+#define POLO_GPIO_DAT7_REG	regptr(MSP_PER_BASE + 0x188)
+					/* Polo GPIO[54:48]  data reg   */
+#define POLO_GPIO_CFG4_REG	regptr(MSP_PER_BASE + 0x18C)
+					/* Polo GPIO[31:24] config reg  */
+#define POLO_GPIO_CFG5_REG	regptr(MSP_PER_BASE + 0x190)
+					/* Polo GPIO[39:32] config reg  */
+#define POLO_GPIO_CFG6_REG	regptr(MSP_PER_BASE + 0x194)
+					/* Polo GPIO[47:40] config reg  */
+#define POLO_GPIO_CFG7_REG	regptr(MSP_PER_BASE + 0x198)
+					/* Polo GPIO[54:48] config reg  */
+#define POLO_GPIO_OD2_REG	regptr(MSP_PER_BASE + 0x19C)
+					/* Polo GPIO[54:32] output drive */
+
+/* Generic GPIO registers                     */
+#define GPIO_DATA1_REG		regptr(MSP_PER_BASE + 0x170)
+					/* GPIO[1:0] data register      */
+#define GPIO_DATA2_REG		regptr(MSP_PER_BASE + 0x174)
+					/* GPIO[5:2] data register      */
+#define GPIO_DATA3_REG		regptr(MSP_PER_BASE + 0x178)
+					/* GPIO[9:6] data register      */
+#define GPIO_DATA4_REG		regptr(MSP_PER_BASE + 0x17C)
+					/* GPIO[15:10] data register    */
+#define GPIO_CFG1_REG		regptr(MSP_PER_BASE + 0x180)
+					/* GPIO[1:0] config register    */
+#define GPIO_CFG2_REG		regptr(MSP_PER_BASE + 0x184)
+					/* GPIO[5:2] config register    */
+#define GPIO_CFG3_REG		regptr(MSP_PER_BASE + 0x188)
+					/* GPIO[9:6] config register    */
+#define GPIO_CFG4_REG		regptr(MSP_PER_BASE + 0x18C)
+					/* GPIO[15:10] config register  */
+#define GPIO_OD_REG		regptr(MSP_PER_BASE + 0x190)
+					/* GPIO[15:0] output drive      */
+
+/*
+ ***************************************************************************
+ * CPU Interface register definitions                                      *
+ ***************************************************************************
+ */
+#define PCI_FLUSH_REG		regptr(MSP_CPUIF_BASE + 0x00)
+					/* PCI-SDRAM queue flush trigger */
+#define OCP_ERR1_REG		regptr(MSP_CPUIF_BASE + 0x04)
+					/* OCP Error Attribute 1        */
+#define OCP_ERR2_REG		regptr(MSP_CPUIF_BASE + 0x08)
+					/* OCP Error Attribute 2        */
+#define OCP_STS_REG		regptr(MSP_CPUIF_BASE + 0x0C)
+					/* OCP Error Status             */
+#define CPUIF_PM_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* CPU policy configuration     */
+#define CPUIF_CFG_REG		regptr(MSP_CPUIF_BASE + 0x10)
+					/* Misc configuration options   */
+
+/* Central Interrupt Controller Registers */
+#define MSP_CIC_BASE		(MSP_CPUIF_BASE + 0x8000)
+					/* Central Interrupt registers  */
+#define CIC_EXT_CFG_REG		regptr(MSP_CIC_BASE + 0x00)
+					/* External interrupt config    */
+#define CIC_STS_REG		regptr(MSP_CIC_BASE + 0x04)
+					/* CIC Interrupt Status         */
+#define CIC_VPE0_MSK_REG	regptr(MSP_CIC_BASE + 0x08)
+					/* VPE0 Interrupt Mask          */
+#define CIC_VPE1_MSK_REG	regptr(MSP_CIC_BASE + 0x0C)
+					/* VPE1 Interrupt Mask          */
+#define CIC_TC0_MSK_REG		regptr(MSP_CIC_BASE + 0x10)
+					/* Thread Context 0 Int Mask    */
+#define CIC_TC1_MSK_REG		regptr(MSP_CIC_BASE + 0x14)
+					/* Thread Context 1 Int Mask    */
+#define CIC_TC2_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 2 Int Mask    */
+#define CIC_TC3_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 3 Int Mask    */
+#define CIC_TC4_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
+					/* Thread Context 4 Int Mask    */
+#define CIC_PCIMSI_STS_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIMSI_MSK_REG	regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIFLSH_REG		regptr(MSP_CIC_BASE + 0x18)
+#define CIC_VPE0_SWINT_REG	regptr(MSP_CIC_BASE + 0x08)
+
+
+/*
+ ***************************************************************************
+ * Memory controller registers                                             *
+ ***************************************************************************
+ */
+#define MEM_CFG1_REG		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_ADDR		regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_DATA		regptr(MSP_MEM_CFG_BASE + 0x04)
+#define MEM_SS_WRITE		regptr(MSP_MEM_CFG_BASE + 0x08)
+
+/*
+ ***************************************************************************
+ * PCI controller registers                                                *
+ ***************************************************************************
+ */
+#define PCI_BASE_REG		regptr(MSP_PCI_BASE + 0x00)
+#define PCI_CONFIG_SPACE_REG	regptr(MSP_PCI_BASE + 0x800)
+#define PCI_JTAG_DEVID_REG	regptr(MSP_SLP_BASE + 0x13c)
+
+/*
+ ########################################################################
+ #  Register content & macro definitions                                #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * DEV_ID defines                                                          *
+ ***************************************************************************
+ */
+#define DEV_ID_PCI_DIS		(1 << 26)       /* Set if PCI disabled */
+#define DEV_ID_PCI_HOST		(1 << 20)       /* Set if PCI host */
+#define DEV_ID_SINGLE_PC	(1 << 19)       /* Set if single PC Card */
+#define DEV_ID_FAMILY		(0xff << 8)     /* family ID code */
+#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)    /* sub family for Polo/Zeus */
+
+#define MSPFPGA_ID		(0x00  << 8)    /* you are on your own here */
+#define MSP5000_ID		(0x50  << 8)
+#define MSP4F00_ID		(0x4f  << 8)    /* FPGA version of MSP4200 */
+#define MSP4E00_ID		(0x4f  << 8)    /* FPGA version of MSP7120 */
+#define MSP4200_ID		(0x42  << 8)
+#define MSP4000_ID		(0x40  << 8)
+#define MSP2XXX_ID		(0x20  << 8)
+#define MSPZEUS_ID		(0x10  << 8)
+
+#define MSP2004_SUB_ID		(0x0   << 16)
+#define MSP2005_SUB_ID		(0x1   << 16)
+#define MSP2006_SUB_ID		(0x1   << 16)
+#define MSP2007_SUB_ID		(0x2   << 16)
+#define MSP2010_SUB_ID		(0x3   << 16)
+#define MSP2015_SUB_ID		(0x4   << 16)
+#define MSP2020_SUB_ID		(0x5   << 16)
+#define MSP2100_SUB_ID		(0x6   << 16)
+
+/*
+ ***************************************************************************
+ * RESET defines                                                           *
+ ***************************************************************************
+ */
+#define MSP_GR_RST		(0x01 << 0)     /* Global reset bit     */
+#define MSP_MR_RST		(0x01 << 1)     /* MIPS reset bit       */
+#define MSP_PD_RST		(0x01 << 2)     /* PVC DMA reset bit    */
+#define MSP_PP_RST		(0x01 << 3)     /* PVC reset bit        */
+/* reserved                                                             */
+#define MSP_EA_RST		(0x01 << 6)     /* Mac A reset bit      */
+#define MSP_EB_RST		(0x01 << 7)     /* Mac B reset bit      */
+#define MSP_SE_RST		(0x01 << 8)     /* Security Eng reset bit */
+#define MSP_PB_RST		(0x01 << 9)     /* Per block reset bit  */
+#define MSP_EC_RST		(0x01 << 10)    /* Mac C reset bit      */
+#define MSP_TW_RST		(0x01 << 11)    /* TWI reset bit        */
+#define MSP_SPI_RST		(0x01 << 12)    /* SPI/MPI reset bit    */
+#define MSP_U1_RST		(0x01 << 13)    /* UART1 reset bit      */
+#define MSP_U0_RST		(0x01 << 14)    /* UART0 reset bit      */
+
+/*
+ ***************************************************************************
+ * UART defines                                                            *
+ ***************************************************************************
+ */
+#define MSP_BASE_BAUD		25000000
+#define MSP_UART_REG_LEN	0x20
+
+/*
+ ***************************************************************************
+ * ELB defines                                                             *
+ ***************************************************************************
+ */
+#define PCCARD_32		0x02    /* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD		0x01    /* Set to enable single PC card */
+
+/*
+ ***************************************************************************
+ * CIC defines                                                             *
+ ***************************************************************************
+ */
+
+/* CIC_EXT_CFG_REG */
+#define EXT_INT_POL(eirq)			(1 << (eirq + 8))
+#define EXT_INT_EDGE(eirq)			(1 << eirq)
+
+#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq)	(reg &= ~EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq)	(reg |= EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_ACTIVE_HI(reg, eirq)	(reg |= EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_LO(reg, eirq)	(reg &= ~EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_RISING		CIC_EXT_SET_ACTIVE_HI
+#define CIC_EXT_SET_ACTIVE_FALLING		CIC_EXT_SET_ACTIVE_LO
+
+#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
+				((reg & EXT_INT_EDGE(eirq)) == 0)
+#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq)	(reg & EXT_INT_EDGE(eirq))
+#define CIC_EXT_IS_ACTIVE_HI(reg, eirq)		(reg & EXT_INT_POL(eirq))
+#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
+				((reg & EXT_INT_POL(eirq)) == 0)
+#define CIC_EXT_IS_ACTIVE_RISING		CIC_EXT_IS_ACTIVE_HI
+#define CIC_EXT_IS_ACTIVE_FALLING		CIC_EXT_IS_ACTIVE_LO
+
+/*
+ ***************************************************************************
+ * Memory Controller defines                                               *
+ ***************************************************************************
+ */
+
+/* Indirect memory controller registers */
+#define DDRC_CFG(n)		(n)
+#define DDRC_DEBUG(n)		(0x04 + n)
+#define DDRC_CTL(n)		(0x40 + n)
+
+/* Macro to perform DDRC indirect write */
+#define DDRC_INDIRECT_WRITE(reg, mask, value) \
+({ \
+	*MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
+	*MEM_SS_DATA = (value); \
+	*MEM_SS_WRITE = 1; \
+})
+
+/*
+ ***************************************************************************
+ * SPI/MPI Mode                                                            *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_BUSY		0x00008000	/* SPI/MPI Receive Busy */
+#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty   */
+#define SPI_MPI_TX_BUSY		0x00002000	/* SPI/MPI Transmit Busy */
+#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full    */
+
+/*
+ ***************************************************************************
+ * SPI/MPI Control Register                                                *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_START	0x00000004	/* Start receive command */
+#define SPI_MPI_FLUSH_Q		0x00000002	/* Flush SPI/MPI Queue */
+#define SPI_MPI_TX_START	0x00000001	/* Start Transmit Command */
+
+#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
new file mode 100644
index 0000000..96d4c8c
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
@@ -0,0 +1,141 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_SLP_INT_H
+#define _MSP_SLP_INT_H
+
+/*
+ * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
+ * hierarchical system.  The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7.  The second level is the SLM
+ * interrupt controller and is assigned the range 8-39.  The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP.  The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block.  These are assigned interrupts in
+ * the range 40-71.
+ */
+
+/*
+ * IRQs directly connected to CPU
+ */
+#define MSP_MIPS_INTBASE	0
+#define MSP_INT_SW0		0  /* IRQ for swint0,         C_SW0  */
+#define MSP_INT_SW1		1  /* IRQ for swint1,         C_SW1  */
+#define MSP_INT_MAC0 		2  /* IRQ for MAC 0,          C_IRQ0 */
+#define MSP_INT_MAC1		3  /* IRQ for MAC 1,          C_IRQ1 */
+#define MSP_INT_C_IRQ2		4  /* Wired off,              C_IRQ2 */
+#define MSP_INT_VE		5  /* IRQ for Voice Engine,   C_IRQ3 */
+#define MSP_INT_SLP		6  /* IRQ for SLM block,      C_IRQ4 */
+#define MSP_INT_TIMER		7  /* IRQ for the MIPS timer, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definition for the SLM
+ * interrupt routine.  For now, just use hard-coded values.
+ */
+#define MSP_SLP_INTBASE		(MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0		(MSP_SLP_INTBASE + 0)
+					/* External interrupt 0         */
+#define MSP_INT_EXT1		(MSP_SLP_INTBASE + 1)
+					/* External interrupt 1         */
+#define MSP_INT_EXT2		(MSP_SLP_INTBASE + 2)
+					/* External interrupt 2         */
+#define MSP_INT_EXT3		(MSP_SLP_INTBASE + 3)
+					/* External interrupt 3         */
+/* Reserved					   4-7                  */
+
+/*
+ *************************************************************************
+ * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
+ * Some MSP produces have this interrupt labelled as Voice and some are  *
+ * SEC mbox ...                                                          *
+ *************************************************************************
+ */
+#define MSP_INT_SLP_VE		(MSP_SLP_INTBASE + 8)
+					/* Cascaded IRQ for Voice Engine*/
+#define MSP_INT_SLP_TDM		(MSP_SLP_INTBASE + 9)
+					/* TDM interrupt                */
+#define MSP_INT_SLP_MAC0	(MSP_SLP_INTBASE + 10)
+					/* Cascaded IRQ for MAC 0       */
+#define MSP_INT_SLP_MAC1	(MSP_SLP_INTBASE + 11)
+					/* Cascaded IRQ for MAC 1       */
+#define MSP_INT_SEC		(MSP_SLP_INTBASE + 12)
+					/* IRQ for security engine      */
+#define	MSP_INT_PER		(MSP_SLP_INTBASE + 13)
+					/* Peripheral interrupt         */
+#define	MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
+					/* SLP timer 0                  */
+#define	MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
+					/* SLP timer 1                  */
+#define	MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
+					/* SLP timer 2                  */
+#define	MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
+					/* Cascaded MIPS timer          */
+#define MSP_INT_BLKCP		(MSP_SLP_INTBASE + 18)
+					/* Block Copy                   */
+#define MSP_INT_UART0		(MSP_SLP_INTBASE + 19)
+					/* UART 0                       */
+#define MSP_INT_PCI		(MSP_SLP_INTBASE + 20)
+					/* PCI subsystem                */
+#define MSP_INT_PCI_DBELL	(MSP_SLP_INTBASE + 21)
+					/* PCI doorbell                 */
+#define MSP_INT_PCI_MSI		(MSP_SLP_INTBASE + 22)
+					/* PCI Message Signal           */
+#define MSP_INT_PCI_BC0		(MSP_SLP_INTBASE + 23)
+					/* PCI Block Copy 0             */
+#define MSP_INT_PCI_BC1		(MSP_SLP_INTBASE + 24)
+					/* PCI Block Copy 1             */
+#define MSP_INT_SLP_ERR		(MSP_SLP_INTBASE + 25)
+					/* SLP error condition          */
+#define MSP_INT_MAC2		(MSP_SLP_INTBASE + 26)
+					/* IRQ for MAC2                 */
+/* Reserved					   26-31                */
+
+/*
+ * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE		(MSP_SLP_INTBASE + 32)
+/* Reserved					   0-1                  */
+#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
+					/* UART 1                       */
+/* Reserved					   3-5                  */
+#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
+					/* 2-wire                       */
+#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
+					/* Peripheral timer block out 0 */
+#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
+					/* Peripheral timer block out 1 */
+/* Reserved					   9                    */
+#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
+					/* SPI RX complete              */
+#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
+					/* SPI TX complete              */
+#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
+					/* GPIO                         */
+#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
+					/* Peripheral error             */
+/* Reserved					   14-31                */
+
+#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
new file mode 100644
index 0000000..0bf48fc
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
+#define __ASM_MIPS_PMC_SIERRA_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
+	defined(CONFIG_PMC_MSP7120_FPGA)
+#define MIPS34K_MISSED_ITLB_WAR         1
+#endif
+
+#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h
new file mode 100644
index 0000000..6ad5191
--- /dev/null
+++ b/arch/mips/include/asm/pmon.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * The cpustart method is a PMC-Sierra's function to start the secondary CPU.
+ * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead.
+ */
+#ifndef _ASM_PMON_H
+#define _ASM_PMON_H
+
+struct callvectors {
+	int	(*open) (char*, int, int);
+	int	(*close) (int);
+	int	(*read) (int, void*, int);
+	int	(*write) (int, void*, int);
+	off_t	(*lseek) (int, off_t, int);
+	int	(*printf) (const char*, ...);
+	void	(*cacheflush) (void);
+	char*	(*gets) (char*);
+	union {
+		int	(*smpfork) (unsigned long cp, char *sp);
+		int	(*cpustart) (long, void (*)(void), void *, long);
+	} _s;
+	int	(*semlock) (int sem);
+	void	(*semunlock) (int sem);
+};
+
+extern struct callvectors *debug_vectors;
+
+#define pmon_open(name, flags, mode)	debug_vectors->open(name, flage, mode)
+#define pmon_close(fd)			debug_vectors->close(fd)
+#define pmon_read(fd, buf, count)	debug_vectors->read(fd, buf, count)
+#define pmon_write(fd, buf, count)	debug_vectors->write(fd, buf, count)
+#define pmon_lseek(fd, off, whence)	debug_vectors->lseek(fd, off, whence)
+#define pmon_printf(fmt...)		debug_vectors->printf(fmt)
+#define pmon_cacheflush()		debug_vectors->cacheflush()
+#define pmon_gets(s)			debug_vectors->gets(s)
+#define pmon_cpustart(n, f, sp, gp)	debug_vectors->_s.cpustart(n, f, sp, gp)
+#define pmon_smpfork(cp, sp)		debug_vectors->_s.smpfork(cp, sp)
+#define pmon_semlock(sem)		debug_vectors->semlock(sem)
+#define pmon_semunlock(sem)		debug_vectors->semunlock(sem)
+
+#endif /* _ASM_PMON_H */
diff --git a/arch/mips/include/asm/poll.h b/arch/mips/include/asm/poll.h
new file mode 100644
index 0000000..47b9520
--- /dev/null
+++ b/arch/mips/include/asm/poll.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POLL_H
+#define __ASM_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	0x0100
+
+#include <asm-generic/poll.h>
+
+#endif /* __ASM_POLL_H */
diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h
new file mode 100644
index 0000000..c200102
--- /dev/null
+++ b/arch/mips/include/asm/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+#include <asm/sgidefs.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long	__kernel_nlink_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned int	__kernel_nlink_t;
+#endif
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long      __kernel_loff_t;
+#endif
+
+typedef struct {
+#if (_MIPS_SZLONG == 32)
+	long	val[2];
+#endif
+#if (_MIPS_SZLONG == 64)
+	int	val[2];
+#endif
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
new file mode 100644
index 0000000..1785083
--- /dev/null
+++ b/arch/mips/include/asm/prefetch.h
@@ -0,0 +1,87 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_PREFETCH_H
+#define __ASM_PREFETCH_H
+
+
+/*
+ * R5000 and RM5200 implements pref and prefx instructions but they're nops, so
+ * rather than wasting time we pretend these processors don't support
+ * prefetching at all.
+ *
+ * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained,
+ * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore.
+ *
+ * Hell (and the book on my shelf I can't open ...) know what the R8000 does.
+ *
+ * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements
+ * Pref_PrepareForStore also.
+ *
+ * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's
+ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
+ * current versions due to erratum G105.
+ *
+ * VR7701 only implements the Load prefetch.
+ *
+ * Finally MIPS32 and MIPS64 implement all of the following hints.
+ */
+
+#define Pref_Load			0
+#define Pref_Store			1
+						/* 2 and 3 are reserved */
+#define Pref_LoadStreamed		4
+#define Pref_StoreStreamed		5
+#define Pref_LoadRetained		6
+#define Pref_StoreRetained		7
+						/* 8 ... 24 are reserved */
+#define Pref_WriteBackInvalidate	25
+#define Pref_PrepareForStore		30
+
+#ifdef __ASSEMBLY__
+
+	.macro	__pref hint addr
+#ifdef CONFIG_CPU_HAS_PREFETCH
+	pref	\hint, \addr
+#endif
+	.endm
+
+	.macro	pref_load addr
+	__pref	Pref_Load, \addr
+	.endm
+
+	.macro	pref_store addr
+	__pref	Pref_Store, \addr
+	.endm
+
+	.macro	pref_load_streamed addr
+	__pref	Pref_LoadStreamed, \addr
+	.endm
+
+	.macro	pref_store_streamed addr
+	__pref	Pref_StoreStreamed, \addr
+	.endm
+
+	.macro	pref_load_retained addr
+	__pref	Pref_LoadRetained, \addr
+	.endm
+
+	.macro	pref_store_retained addr
+	__pref	Pref_StoreRetained, \addr
+	.endm
+
+	.macro	pref_wback_inv addr
+	__pref	Pref_WriteBackInvalidate, \addr
+	.endm
+
+	.macro	pref_prepare_for_store addr
+	__pref	Pref_PrepareForStore, \addr
+	.endm
+
+#endif
+
+#endif /* __ASM_PREFETCH_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
new file mode 100644
index 0000000..a1e4453
--- /dev/null
+++ b/arch/mips/include/asm/processor.h
@@ -0,0 +1,263 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#include <asm/cachectl.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/mipsregs.h>
+#include <asm/prefetch.h>
+#include <asm/system.h>
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern unsigned int vced_count, vcei_count;
+
+#ifdef CONFIG_32BIT
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	0x7fff8000UL
+#define STACK_TOP	TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
+#endif
+
+#ifdef CONFIG_64BIT
+/*
+ * User space process size: 1TB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.  TASK_SIZE
+ * is limited to 1TB by the R4000 architecture; R10000 and better can
+ * support 16TB; the architectural reserve for future expansion is
+ * 8192EB ...
+ */
+#define TASK_SIZE32	0x7fff8000UL
+#define TASK_SIZE	0x10000000000UL
+#define STACK_TOP	\
+      (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE						\
+	(test_thread_flag(TIF_32BIT_ADDR) ?				\
+		PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_SIZE_OF(tsk)						\
+	(test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+#define NUM_FPU_REGS	32
+
+typedef __u64 fpureg_t;
+
+/*
+ * It would be nice to add some more fields for emulator statistics, but there
+ * are a number of fixed offsets in offset.h and elsewhere that would have to
+ * be recalculated by hand.  So the additional information will be private to
+ * the FPU emulator for now.  See asm-mips/fpu_emulator.h.
+ */
+
+struct mips_fpu_struct {
+	fpureg_t	fpr[NUM_FPU_REGS];
+	unsigned int	fcr31;
+};
+
+#define NUM_DSP_REGS   6
+
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+	dspreg_t        dspr[NUM_DSP_REGS];
+	unsigned int    dspcontrol;
+};
+
+#define INIT_CPUMASK { \
+	{0,} \
+}
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN	8
+
+struct mips_abi;
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+	/* Saved main processor registers. */
+	unsigned long reg16;
+	unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23;
+	unsigned long reg29, reg30, reg31;
+
+	/* Saved cp0 stuff. */
+	unsigned long cp0_status;
+
+	/* Saved fpu/fpu emulator stuff. */
+	struct mips_fpu_struct fpu;
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* Emulated instruction count */
+	unsigned long emulated_fp;
+	/* Saved per-thread scheduler affinity mask */
+	cpumask_t user_cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	/* Saved state of the DSP ASE, if available. */
+	struct mips_dsp_state dsp;
+
+	/* Other stuff associated with the thread. */
+	unsigned long cp0_badvaddr;	/* Last user fault */
+	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
+	unsigned long error_code;
+	unsigned long trap_no;
+	unsigned long irix_trampoline;  /* Wheee... */
+	unsigned long irix_oldctx;
+	struct mips_abi *abi;
+};
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#define FPAFF_INIT						\
+	.emulated_fp			= 0,			\
+	.user_cpus_allowed		= INIT_CPUMASK,
+#else
+#define FPAFF_INIT
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+#define INIT_THREAD  {						\
+        /*							\
+         * Saved main processor registers			\
+         */							\
+	.reg16			= 0,				\
+	.reg17			= 0,				\
+	.reg18			= 0,				\
+	.reg19			= 0,				\
+	.reg20			= 0,				\
+	.reg21			= 0,				\
+	.reg22			= 0,				\
+	.reg23			= 0,				\
+	.reg29			= 0,				\
+	.reg30			= 0,				\
+	.reg31			= 0,				\
+	/*							\
+	 * Saved cp0 stuff					\
+	 */							\
+	.cp0_status		= 0,				\
+	/*							\
+	 * Saved FPU/FPU emulator stuff				\
+	 */							\
+	.fpu			= {				\
+		.fpr		= {0,},				\
+		.fcr31		= 0,				\
+	},							\
+	/*							\
+	 * FPU affinity state (null if not FPAFF)		\
+	 */							\
+	FPAFF_INIT						\
+	/*							\
+	 * Saved DSP stuff					\
+	 */							\
+	.dsp			= {				\
+		.dspr		= {0, },			\
+		.dspcontrol	= 0,				\
+	},							\
+	/*							\
+	 * Other stuff associated with the process		\
+	 */							\
+	.cp0_badvaddr		= 0,				\
+	.cp0_baduaddr		= 0,				\
+	.error_code		= 0,				\
+	.trap_no		= 0,				\
+	.irix_trampoline	= 0,				\
+	.irix_oldctx		= 0,				\
+}
+
+struct task_struct;
+
+/* Free all resources held by a thread. */
+#define release_thread(thread) do { } while(0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
+#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
+
+#define cpu_relax()	barrier()
+
+/*
+ * Return_address is a replacement for __builtin_return_address(count)
+ * which on certain architectures cannot reasonably be implemented in GCC
+ * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386).
+ * Note that __builtin_return_address(x>=1) is forbidden because GCC
+ * aborts compilation on some CPUs.  It's simply not possible to unwind
+ * some CPU's stackframes.
+ *
+ * __builtin_return_address works only for non-leaf functions.  We avoid the
+ * overhead of a function call by forcing the compiler to save the return
+ * address register on the stack.
+ */
+#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
+
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *addr)
+{
+	__asm__ __volatile__(
+	"	.set	mips4		\n"
+	"	pref	%0, (%1)	\n"
+	"	.set	mips0		\n"
+	:
+	: "i" (Pref_Load), "r" (addr));
+}
+
+#endif
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
new file mode 100644
index 0000000..c00cca2
--- /dev/null
+++ b/arch/mips/include/asm/ptrace.h
@@ -0,0 +1,102 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#ifdef CONFIG_64BIT
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
+/* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
+#define FPR_BASE	32
+#define PC		64
+#define CAUSE		65
+#define BADVADDR	66
+#define MMHI		67
+#define MMLO		68
+#define FPC_CSR		69
+#define FPC_EIR		70
+#define DSP_BASE	71		/* 3 more hi / lo register pairs */
+#define DSP_CONTROL	77
+#define ACX		78
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+#ifdef CONFIG_32BIT
+	/* Pad bytes for argument save space on the stack. */
+	unsigned long pad0[6];
+#endif
+
+	/* Saved main processor registers. */
+	unsigned long regs[32];
+
+	/* Saved special registers. */
+	unsigned long cp0_status;
+	unsigned long hi;
+	unsigned long lo;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	unsigned long acx;
+#endif
+	unsigned long cp0_badvaddr;
+	unsigned long cp0_cause;
+	unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long cp0_tcstatus;
+#endif /* CONFIG_MIPS_MT_SMTC */
+} __attribute__ ((aligned (8)));
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS		14
+#define PTRACE_SETFPREGS		15
+/* #define PTRACE_GETFPXREGS		18 */
+/* #define PTRACE_SETFPXREGS		19 */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#define PTRACE_GET_THREAD_AREA	25
+#define PTRACE_SET_THREAD_AREA	26
+
+/* Calls to trace a 64bit program from a 32bit program.  */
+#define PTRACE_PEEKTEXT_3264	0xc0
+#define PTRACE_PEEKDATA_3264	0xc1
+#define PTRACE_POKETEXT_3264	0xc2
+#define PTRACE_POKEDATA_3264	0xc3
+#define PTRACE_GET_THREAD_AREA_3264	0xc4
+
+#ifdef __KERNEL__
+
+#include <linux/linkage.h>
+#include <asm/isadep.h>
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
+
+#define instruction_pointer(regs) ((regs)->cp0_epc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+
+extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+
+static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+{
+	if (unlikely(!user_mode(regs)))
+		die(str, regs);
+}
+
+#endif
+
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h
new file mode 100644
index 0000000..a37d12b
--- /dev/null
+++ b/arch/mips/include/asm/r4k-timer.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_R4K_TYPES_H
+#define __ASM_R4K_TYPES_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_SYNC_R4K
+
+extern void synchronise_count_master(void);
+extern void synchronise_count_slave(void);
+
+#else
+
+static inline void synchronise_count_master(void)
+{
+}
+
+static inline void synchronise_count_slave(void)
+{
+}
+
+#endif
+
+#endif /* __ASM_R4K_TYPES_H */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
new file mode 100644
index 0000000..4c140db
--- /dev/null
+++ b/arch/mips/include/asm/r4kcache.h
@@ -0,0 +1,443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Inline assembly cache operations.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_R4KCACHE_H
+#define _ASM_R4KCACHE_H
+
+#include <asm/asm.h>
+#include <asm/cacheops.h>
+#include <asm/cpu-features.h>
+#include <asm/mipsmtregs.h>
+
+/*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations.  Two issues here:
+ *
+ *  - The MIPS32 and MIPS64 specs permit an implementation to directly derive
+ *    the index bits from the virtual address.  This breaks with tradition
+ *    set by the R4000.  To keep unpleasant surprises from happening we pick
+ *    an address in KSEG0 / CKSEG0.
+ *  - We need a properly sign extended address for 64-bit code.  To get away
+ *    without ifdefs we let the compiler do it by a type cast.
+ */
+#define INDEX_BASE	CKSEG0
+
+#define cache_op(op,addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noreorder				\n"	\
+	"	.set	mips3\n\t				\n"	\
+	"	cache	%0, %1					\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+#ifdef CONFIG_MIPS_MT
+/*
+ * Temporary hacks for SMTC debug. Optionally force single-threaded
+ * execution during I-cache flushes.
+ */
+
+#define PROTECT_CACHE_FLUSHES 1
+
+#ifdef PROTECT_CACHE_FLUSHES
+
+extern int mt_protiflush;
+extern int mt_protdflush;
+extern void mt_cflush_lockdown(void);
+extern void mt_cflush_release(void);
+
+#define BEGIN_MT_IPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protiflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_IPROT \
+	if(mt_protiflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#define BEGIN_MT_DPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protdflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_DPROT \
+	if(mt_protdflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#else
+
+#define BEGIN_MT_IPROT
+#define BEGIN_MT_DPROT
+#define END_MT_IPROT
+#define END_MT_DPROT
+
+#endif /* PROTECT_CACHE_FLUSHES */
+
+#define __iflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_iflushes;					\
+	BEGIN_MT_IPROT							\
+	for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
+
+#define __iflush_epilogue						\
+	END_MT_IPROT							\
+	}
+
+#define __dflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_dflushes;					\
+	BEGIN_MT_DPROT							\
+	for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
+
+#define __dflush_epilogue \
+	END_MT_DPROT	 \
+	}
+
+#define __inv_dflush_prologue __dflush_prologue
+#define __inv_dflush_epilogue __dflush_epilogue
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue __sflush_prologue
+#define __inv_sflush_epilogue __sflush_epilogue
+
+#else /* CONFIG_MIPS_MT */
+
+#define __iflush_prologue {
+#define __iflush_epilogue }
+#define __dflush_prologue {
+#define __dflush_epilogue }
+#define __inv_dflush_prologue {
+#define __inv_dflush_epilogue }
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue {
+#define __inv_sflush_epilogue }
+
+#endif /* CONFIG_MIPS_MT */
+
+static inline void flush_icache_line_indexed(unsigned long addr)
+{
+	__iflush_prologue
+	cache_op(Index_Invalidate_I, addr);
+	__iflush_epilogue
+}
+
+static inline void flush_dcache_line_indexed(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Index_Writeback_Inv_D, addr);
+	__dflush_epilogue
+}
+
+static inline void flush_scache_line_indexed(unsigned long addr)
+{
+	cache_op(Index_Writeback_Inv_SD, addr);
+}
+
+static inline void flush_icache_line(unsigned long addr)
+{
+	__iflush_prologue
+	cache_op(Hit_Invalidate_I, addr);
+	__iflush_epilogue
+}
+
+static inline void flush_dcache_line(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Hit_Writeback_Inv_D, addr);
+	__dflush_epilogue
+}
+
+static inline void invalidate_dcache_line(unsigned long addr)
+{
+	__dflush_prologue
+	cache_op(Hit_Invalidate_D, addr);
+	__dflush_epilogue
+}
+
+static inline void invalidate_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Invalidate_SD, addr);
+}
+
+static inline void flush_scache_line(unsigned long addr)
+{
+	cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+#define protected_cache_op(op,addr)				\
+	__asm__ __volatile__(					\
+	"	.set	push			\n"		\
+	"	.set	noreorder		\n"		\
+	"	.set	mips3			\n"		\
+	"1:	cache	%0, (%1)		\n"		\
+	"2:	.set	pop			\n"		\
+	"	.section __ex_table,\"a\"	\n"		\
+	"	"STR(PTR)" 1b, 2b		\n"		\
+	"	.previous"					\
+	:							\
+	: "i" (op), "r" (addr))
+
+/*
+ * The next two are for badland addresses like signal trampolines.
+ */
+static inline void protected_flush_icache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Invalidate_I, addr);
+}
+
+/*
+ * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
+ * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
+ * caches.  We're talking about one cacheline unnecessarily getting invalidated
+ * here so the penalty isn't overly hard.
+ */
+static inline void protected_writeback_dcache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Writeback_Inv_D, addr);
+}
+
+static inline void protected_writeback_scache_line(unsigned long addr)
+{
+	protected_cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+/*
+ * This one is RM7000-specific
+ */
+static inline void invalidate_tcache_page(unsigned long addr)
+{
+	cache_op(Page_Invalidate_T, addr);
+}
+
+#define cache16_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x010(%0)	\n"	\
+	"	cache %1, 0x020(%0); cache %1, 0x030(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x050(%0)	\n"	\
+	"	cache %1, 0x060(%0); cache %1, 0x070(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x090(%0)	\n"	\
+	"	cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)	\n"	\
+	"	cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x110(%0)	\n"	\
+	"	cache %1, 0x120(%0); cache %1, 0x130(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x150(%0)	\n"	\
+	"	cache %1, 0x160(%0); cache %1, 0x170(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x190(%0)	\n"	\
+	"	cache %1, 0x1a0(%0); cache %1, 0x1b0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1d0(%0)	\n"	\
+	"	cache %1, 0x1e0(%0); cache %1, 0x1f0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache32_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x020(%0)	\n"	\
+	"	cache %1, 0x040(%0); cache %1, 0x060(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0a0(%0)	\n"	\
+	"	cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x120(%0)	\n"	\
+	"	cache %1, 0x140(%0); cache %1, 0x160(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1a0(%0)	\n"	\
+	"	cache %1, 0x1c0(%0); cache %1, 0x1e0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x220(%0)	\n"	\
+	"	cache %1, 0x240(%0); cache %1, 0x260(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2a0(%0)	\n"	\
+	"	cache %1, 0x2c0(%0); cache %1, 0x2e0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x320(%0)	\n"	\
+	"	cache %1, 0x340(%0); cache %1, 0x360(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3a0(%0)	\n"	\
+	"	cache %1, 0x3c0(%0); cache %1, 0x3e0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache64_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x040(%0)	\n"	\
+	"	cache %1, 0x080(%0); cache %1, 0x0c0(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x140(%0)	\n"	\
+	"	cache %1, 0x180(%0); cache %1, 0x1c0(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x240(%0)	\n"	\
+	"	cache %1, 0x280(%0); cache %1, 0x2c0(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x340(%0)	\n"	\
+	"	cache %1, 0x380(%0); cache %1, 0x3c0(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x440(%0)	\n"	\
+	"	cache %1, 0x480(%0); cache %1, 0x4c0(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x540(%0)	\n"	\
+	"	cache %1, 0x580(%0); cache %1, 0x5c0(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x640(%0)	\n"	\
+	"	cache %1, 0x680(%0); cache %1, 0x6c0(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x740(%0)	\n"	\
+	"	cache %1, 0x780(%0); cache %1, 0x7c0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache128_unroll32(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips3					\n"	\
+	"	cache %1, 0x000(%0); cache %1, 0x080(%0)	\n"	\
+	"	cache %1, 0x100(%0); cache %1, 0x180(%0)	\n"	\
+	"	cache %1, 0x200(%0); cache %1, 0x280(%0)	\n"	\
+	"	cache %1, 0x300(%0); cache %1, 0x380(%0)	\n"	\
+	"	cache %1, 0x400(%0); cache %1, 0x480(%0)	\n"	\
+	"	cache %1, 0x500(%0); cache %1, 0x580(%0)	\n"	\
+	"	cache %1, 0x600(%0); cache %1, 0x680(%0)	\n"	\
+	"	cache %1, 0x700(%0); cache %1, 0x780(%0)	\n"	\
+	"	cache %1, 0x800(%0); cache %1, 0x880(%0)	\n"	\
+	"	cache %1, 0x900(%0); cache %1, 0x980(%0)	\n"	\
+	"	cache %1, 0xa00(%0); cache %1, 0xa80(%0)	\n"	\
+	"	cache %1, 0xb00(%0); cache %1, 0xb80(%0)	\n"	\
+	"	cache %1, 0xc00(%0); cache %1, 0xc80(%0)	\n"	\
+	"	cache %1, 0xd00(%0); cache %1, 0xd80(%0)	\n"	\
+	"	cache %1, 0xe00(%0); cache %1, 0xe80(%0)	\n"	\
+	"	cache %1, 0xf00(%0); cache %1, 0xf80(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+static inline void blast_##pfx##cache##lsize(void)			\
+{									\
+	unsigned long start = INDEX_BASE;				\
+	unsigned long end = start + current_cpu_data.desc.waysize;	\
+	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
+	unsigned long ws_end = current_cpu_data.desc.ways <<		\
+	                       current_cpu_data.desc.waybit;		\
+	unsigned long ws, addr;						\
+									\
+	__##pfx##flush_prologue						\
+									\
+	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+		for (addr = start; addr < end; addr += lsize * 32)	\
+			cache##lsize##_unroll32(addr|ws, indexop);	\
+									\
+	__##pfx##flush_epilogue						\
+}									\
+									\
+static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
+{									\
+	unsigned long start = page;					\
+	unsigned long end = page + PAGE_SIZE;				\
+									\
+	__##pfx##flush_prologue						\
+									\
+	do {								\
+		cache##lsize##_unroll32(start, hitop);			\
+		start += lsize * 32;					\
+	} while (start < end);						\
+									\
+	__##pfx##flush_epilogue						\
+}									\
+									\
+static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
+{									\
+	unsigned long indexmask = current_cpu_data.desc.waysize - 1;	\
+	unsigned long start = INDEX_BASE + (page & indexmask);		\
+	unsigned long end = start + PAGE_SIZE;				\
+	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
+	unsigned long ws_end = current_cpu_data.desc.ways <<		\
+	                       current_cpu_data.desc.waybit;		\
+	unsigned long ws, addr;						\
+									\
+	__##pfx##flush_prologue						\
+									\
+	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+		for (addr = start; addr < end; addr += lsize * 32)	\
+			cache##lsize##_unroll32(addr|ws, indexop);	\
+									\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+
+/* build blast_xxx_range, protected_blast_xxx_range */
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+						    unsigned long end)	\
+{									\
+	unsigned long lsize = cpu_##desc##_line_size();			\
+	unsigned long addr = start & ~(lsize - 1);			\
+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
+									\
+	__##pfx##flush_prologue						\
+									\
+	while (1) {							\
+		prot##cache_op(hitop, addr);				\
+		if (addr == aend)					\
+			break;						\
+		addr += lsize;						\
+	}								\
+									\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+/* blast_inv_dcache_range */
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+
+#endif /* _ASM_R4KCACHE_H */
diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h
new file mode 100644
index 0000000..e48c0bf
--- /dev/null
+++ b/arch/mips/include/asm/reboot.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_REBOOT_H
+#define _ASM_REBOOT_H
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+
+#endif /* _ASM_REBOOT_H */
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
new file mode 100644
index 0000000..634b55d
--- /dev/null
+++ b/arch/mips/include/asm/reg.h
@@ -0,0 +1,128 @@
+/*
+ * Various register offset definitions for debuggers, core file
+ * examiners and whatnot.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
+ */
+#ifndef __ASM_MIPS_REG_H
+#define __ASM_MIPS_REG_H
+
+
+#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
+
+#define EF_R0			6
+#define EF_R1			7
+#define EF_R2			8
+#define EF_R3			9
+#define EF_R4			10
+#define EF_R5			11
+#define EF_R6			12
+#define EF_R7			13
+#define EF_R8			14
+#define EF_R9			15
+#define EF_R10			16
+#define EF_R11			17
+#define EF_R12			18
+#define EF_R13			19
+#define EF_R14			20
+#define EF_R15			21
+#define EF_R16			22
+#define EF_R17			23
+#define EF_R18			24
+#define EF_R19			25
+#define EF_R20			26
+#define EF_R21			27
+#define EF_R22			28
+#define EF_R23			29
+#define EF_R24			30
+#define EF_R25			31
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			32
+#define EF_R27			33
+
+#define EF_R28			34
+#define EF_R29			35
+#define EF_R30			36
+#define EF_R31			37
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			38
+#define EF_HI			39
+
+#define EF_CP0_EPC		40
+#define EF_CP0_BADVADDR		41
+#define EF_CP0_STATUS		42
+#define EF_CP0_CAUSE		43
+#define EF_UNUSED0		44
+
+#define EF_SIZE			180
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define EF_R0			 0
+#define EF_R1			 1
+#define EF_R2			 2
+#define EF_R3			 3
+#define EF_R4			 4
+#define EF_R5			 5
+#define EF_R6			 6
+#define EF_R7			 7
+#define EF_R8			 8
+#define EF_R9			 9
+#define EF_R10			10
+#define EF_R11			11
+#define EF_R12			12
+#define EF_R13			13
+#define EF_R14			14
+#define EF_R15			15
+#define EF_R16			16
+#define EF_R17			17
+#define EF_R18			18
+#define EF_R19			19
+#define EF_R20			20
+#define EF_R21			21
+#define EF_R22			22
+#define EF_R23			23
+#define EF_R24			24
+#define EF_R25			25
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26			26
+#define EF_R27			27
+
+
+#define EF_R28			28
+#define EF_R29			29
+#define EF_R30			30
+#define EF_R31			31
+
+/*
+ * Saved special registers
+ */
+#define EF_LO			32
+#define EF_HI			33
+
+#define EF_CP0_EPC		34
+#define EF_CP0_BADVADDR		35
+#define EF_CP0_STATUS		36
+#define EF_CP0_CAUSE		37
+
+#define EF_SIZE			304	/* size in bytes */
+
+#endif /* CONFIG_64BIT */
+
+#endif /* __ASM_MIPS_REG_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
new file mode 100644
index 0000000..7c8ecb6
--- /dev/null
+++ b/arch/mips/include/asm/regdef.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero    $0      /* wired zero */
+#define AT      $1      /* assembler temp  - uppercase because of ".set at" */
+#define v0      $2      /* return value */
+#define v1      $3
+#define a0      $4      /* argument registers */
+#define a1      $5
+#define a2      $6
+#define a3      $7
+#define t0      $8      /* caller saved */
+#define t1      $9
+#define t2      $10
+#define t3      $11
+#define t4      $12
+#define t5      $13
+#define t6      $14
+#define t7      $15
+#define s0      $16     /* callee saved */
+#define s1      $17
+#define s2      $18
+#define s3      $19
+#define s4      $20
+#define s5      $21
+#define s6      $22
+#define s7      $23
+#define t8      $24     /* caller saved */
+#define t9      $25
+#define jp      $25     /* PIC jump register */
+#define k0      $26     /* kernel scratch */
+#define k1      $27
+#define gp      $28     /* global pointer */
+#define sp      $29     /* stack pointer */
+#define fp      $30     /* frame pointer */
+#define s8	$30	/* same like fp! */
+#define ra      $31     /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero	$0	/* wired zero */
+#define AT	$at	/* assembler temp - uppercase because of ".set at" */
+#define v0	$2	/* return value - caller saved */
+#define v1	$3
+#define a0	$4	/* argument registers */
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define a4	$8	/* arg reg 64 bit; caller saved in 32 bit */
+#define ta0	$8
+#define a5	$9
+#define ta1	$9
+#define a6	$10
+#define ta2	$10
+#define a7	$11
+#define ta3	$11
+#define t0	$12	/* caller saved */
+#define t1	$13
+#define t2	$14
+#define t3	$15
+#define s0	$16	/* callee saved */
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24	/* caller saved */
+#define t9	$25	/* callee address for PIC/temp */
+#define jp	$25	/* PIC jump register */
+#define k0	$26	/* kernel temporary */
+#define k1	$27
+#define gp	$28	/* global pointer - caller saved for PIC */
+#define sp	$29	/* stack pointer */
+#define fp	$30	/* frame pointer */
+#define s8	$30	/* callee saved */
+#define ra	$31	/* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/arch/mips/include/asm/resource.h b/arch/mips/include/asm/resource.h
new file mode 100644
index 0000000..87cb308
--- /dev/null
+++ b/arch/mips/include/asm/resource.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+
+/*
+ * These five resource limit IDs have a MIPS/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		5	/* max number of open files */
+#define RLIMIT_AS		6	/* address space limit */
+#define RLIMIT_RSS		7	/* max resident set size */
+#define RLIMIT_NPROC		8	/* max number of processes */
+#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway,
+ * but we keep the old value on MIPS32,
+ * for compatibility:
+ */
+#ifdef CONFIG_32BIT
+# define RLIM_INFINITY		0x7fffffffUL
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
diff --git a/arch/mips/include/asm/rm9k-ocd.h b/arch/mips/include/asm/rm9k-ocd.h
new file mode 100644
index 0000000..b0b80d9
--- /dev/null
+++ b/arch/mips/include/asm/rm9k-ocd.h
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (C) 2004 by Basler Vision Technologies AG
+ *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_RM9K_OCD_H)
+#define _ASM_RM9K_OCD_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+extern volatile void __iomem * const ocd_base;
+extern volatile void __iomem * const titan_base;
+
+#define ocd_addr(__x__)		(ocd_base + (__x__))
+#define titan_addr(__x__)	(titan_base + (__x__))
+#define scram_addr(__x__)	(scram_base + (__x__))
+
+/* OCD register access */
+#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__))
+#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__))
+#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__))
+#define ocd_writel(__val__, __offs__) \
+	__raw_writel((__val__), ocd_addr(__offs__))
+#define ocd_writew(__val__, __offs__) \
+	__raw_writew((__val__), ocd_addr(__offs__))
+#define ocd_writeb(__val__, __offs__) \
+	__raw_writeb((__val__), ocd_addr(__offs__))
+
+/* TITAN register access - 32 bit-wide only */
+#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__))
+#define titan_writel(__val__, __offs__) \
+	__raw_writel((__val__), titan_addr(__offs__))
+
+/* Protect access to shared TITAN registers */
+extern spinlock_t titan_lock;
+extern int titan_irqflags;
+#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags)
+#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags)
+
+#endif	/* !defined(_ASM_RM9K_OCD_H) */
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
new file mode 100644
index 0000000..4ca3063
--- /dev/null
+++ b/arch/mips/include/asm/rtlx.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ */
+
+#ifndef __ASM_RTLX_H_
+#define __ASM_RTLX_H_
+
+#include <irq.h>
+
+#define LX_NODE_BASE 10
+
+#define MIPS_CPU_RTLX_IRQ 0
+
+#define RTLX_VERSION 2
+#define RTLX_xID 0x12345600
+#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_CHANNELS 8
+
+#define RTLX_CHANNEL_STDIO	0
+#define RTLX_CHANNEL_DBG	1
+#define RTLX_CHANNEL_SYSIO	2
+
+extern int rtlx_open(int index, int can_sleep);
+extern int rtlx_release(int index);
+extern ssize_t rtlx_read(int index, void __user *buff, size_t count);
+extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
+extern unsigned int rtlx_read_poll(int index, int can_sleep);
+extern unsigned int rtlx_write_poll(int index);
+
+enum rtlx_state {
+	RTLX_STATE_UNUSED = 0,
+	RTLX_STATE_INITIALISED,
+	RTLX_STATE_REMOTE_READY,
+	RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 2048
+
+/* each channel supports read and write.
+   linux (vpe0) reads lx_buffer  and writes rt_buffer
+   SP (vpe1) reads rt_buffer and writes lx_buffer
+*/
+struct rtlx_channel {
+	enum rtlx_state rt_state;
+	enum rtlx_state lx_state;
+
+	int buffer_size;
+
+	/* read and write indexes per buffer */
+	int rt_write, rt_read;
+	char *rt_buffer;
+
+	int lx_write, lx_read;
+	char *lx_buffer;
+};
+
+struct rtlx_info {
+	unsigned long id;
+	enum rtlx_state state;
+
+	struct rtlx_channel channel[RTLX_CHANNELS];
+};
+
+#endif /* __ASM_RTLX_H_ */
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
new file mode 100644
index 0000000..83d69fe
--- /dev/null
+++ b/arch/mips/include/asm/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SCATTERLIST_H
+#define __ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0x00ffffffUL)
+
+#endif /* __ASM_SCATTERLIST_H */
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
new file mode 100644
index 0000000..36ed440
--- /dev/null
+++ b/arch/mips/include/asm/seccomp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+/*
+ * Kludge alert:
+ *
+ * The generic seccomp code currently allows only a single compat ABI.  Until
+ * this is fixed we priorize O32 as the compat ABI over N32.
+ */
+#ifdef CONFIG_MIPS32_O32
+
+#define TIF_32BIT TIF_32BIT_REGS
+
+#define __NR_seccomp_read_32		4003
+#define __NR_seccomp_write_32		4004
+#define __NR_seccomp_exit_32		4001
+#define __NR_seccomp_sigreturn_32	4193	/* rt_sigreturn */
+
+#elif defined(CONFIG_MIPS32_N32)
+
+#define TIF_32BIT _TIF_32BIT_ADDR
+
+#define __NR_seccomp_read_32		6000
+#define __NR_seccomp_write_32		6001
+#define __NR_seccomp_exit_32		6058
+#define __NR_seccomp_sigreturn_32	6211	/* rt_sigreturn */
+
+#endif /* CONFIG_MIPS32_O32 */
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
new file mode 100644
index 0000000..b7e3726
--- /dev/null
+++ b/arch/mips/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_SECTIONS_H */
diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h
new file mode 100644
index 0000000..92ac001
--- /dev/null
+++ b/arch/mips/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_SEGMENT_H */
diff --git a/arch/mips/include/asm/sembuf.h b/arch/mips/include/asm/sembuf.h
new file mode 100644
index 0000000..7281a4d
--- /dev/null
+++ b/arch/mips/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
new file mode 100644
index 0000000..c07ebd8
--- /dev/null
+++ b/arch/mips/include/asm/serial.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
new file mode 100644
index 0000000..e600ced
--- /dev/null
+++ b/arch/mips/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifndef _MIPS_SETUP_H
+#define _MIPS_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#ifdef  __KERNEL__
+extern void setup_early_printk(void);
+#endif /* __KERNEL__ */
+
+#endif /* __SETUP_H */
diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
new file mode 100644
index 0000000..889cf02
--- /dev/null
+++ b/arch/mips/include/asm/sgi/gio.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * gio.h: Definitions for SGI GIO bus
+ *
+ * Copyright (C) 2002 Ladislav Michl
+ */
+
+#ifndef _SGI_GIO_H
+#define _SGI_GIO_H
+
+/*
+ * GIO bus addresses
+ *
+ * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
+ * three physical connectors, but only two slots, GFX and EXP0.
+ *
+ * There is 10MB of GIO address space for GIO64 slot devices
+ * slot#   slot type address range            size
+ * -----   --------- ----------------------- -----
+ *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
+ *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
+ *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
+ *
+ * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
+ * into the HPC address space.
+ *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
+ *
+ * Following space is reserved and unused
+ *   -     RESERVED  0x18000000 - 0x1effffff 112MB
+ *
+ * GIO bus IDs
+ *
+ * Each GIO bus device identifies itself to the system by answering a
+ * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
+ * than 128 are 8 bits long, with the most significant 24 bits read from
+ * the slot undefined.
+ *
+ * 32-bit IDs are divided into
+ *	bits 0:6        the product ID; ranges from 0x00 to 0x7F.
+ *	bit 7		0=GIO Product ID is 8 bits wide
+ *			1=GIO Product ID is 32 bits wide.
+ *	bits 8:15       manufacturer version for the product.
+ *	bit 16		0=GIO32 and GIO32-bis, 1=GIO64.
+ *	bit 17		0=no ROM present
+ *			1=ROM present on this board AND next three words
+ *			space define the ROM.
+ *	bits 18:31	up to manufacturer.
+ *
+ * IDs above 0x50/0xd0 are of 3rd party boards.
+ *
+ * 8-bit IDs
+ *	0x01		XPI low cost FDDI
+ *	0x02		GTR TokenRing
+ *	0x04		Synchronous ISDN
+ *	0x05		ATM board [*]
+ *	0x06		Canon Interface
+ *	0x07		16 bit SCSI Card [*]
+ *	0x08		JPEG (Double Wide)
+ *	0x09		JPEG (Single Wide)
+ *	0x0a		XPI mez. FDDI device 0
+ *	0x0b		XPI mez. FDDI device 1
+ *	0x0c		SMPTE 259M Video [*]
+ *	0x0d		Babblefish Compression [*]
+ *	0x0e		E-Plex 8-port Ethernet
+ *	0x30		Lyon Lamb IVAS
+ *	0xb8		GIO 100BaseTX Fast Ethernet (gfe)
+ *
+ * [*] Device provide 32-bit ID.
+ *
+ */
+
+#define GIO_ID(x)		(x & 0x7f)
+#define GIO_32BIT_ID		0x80
+#define GIO_REV(x)		((x >> 8) & 0xff)
+#define GIO_64BIT_IFACE		0x10000
+#define GIO_ROM_PRESENT		0x20000
+#define GIO_VENDOR_CODE(x)	((x >> 18) & 0x3fff)
+
+#define GIO_SLOT_GFX_BASE	0x1f000000
+#define GIO_SLOT_EXP0_BASE	0x1f400000
+#define GIO_SLOT_EXP1_BASE	0x1f600000
+
+#endif /* _SGI_GIO_H */
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
new file mode 100644
index 0000000..c4729f5
--- /dev/null
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -0,0 +1,317 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * hpc3.h: Definitions for SGI HPC3 controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1998 Ralf Baechle
+ */
+
+#ifndef _SGI_HPC3_H
+#define _SGI_HPC3_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+/* An HPC DMA descriptor. */
+struct hpc_dma_desc {
+	u32 pbuf;	/* physical address of data buffer */
+	u32 cntinfo;	/* counter and info bits */
+#define HPCDMA_EOX	0x80000000 /* last desc in chain for tx */
+#define HPCDMA_EOR	0x80000000 /* last desc in chain for rx */
+#define HPCDMA_EOXP	0x40000000 /* end of packet for tx */
+#define HPCDMA_EORP	0x40000000 /* end of packet for rx */
+#define HPCDMA_XIE	0x20000000 /* irq generated when at end of this desc */
+#define HPCDMA_XIU	0x01000000 /* Tx buffer in use by CPU. */
+#define HPCDMA_EIPC	0x00ff0000 /* SEEQ ethernet special xternal bytecount */
+#define HPCDMA_ETXD	0x00008000 /* set to one by HPC when packet tx'd */
+#define HPCDMA_OWN	0x00004000 /* Denotes ring buffer ownership on rx */
+#define HPCDMA_BCNT	0x00003fff /* size in bytes of this dma buffer */
+
+	u32 pnext;	/* paddr of next hpc_dma_desc if any */
+};
+
+/* The set of regs for each HPC3 PBUS DMA channel. */
+struct hpc3_pbus_dmacregs {
+	volatile u32 pbdma_bptr;	/* pbus dma channel buffer ptr */
+	volatile u32 pbdma_dptr;	/* pbus dma channel desc ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 pbdma_ctrl;	/* pbus dma channel control register has
+					 * copletely different meaning for read
+					 * compared with write */
+	/* read */
+#define HPC3_PDMACTRL_INT	0x00000001 /* interrupt (cleared after read) */
+#define HPC3_PDMACTRL_ISACT	0x00000002 /* channel active */
+	/* write */
+#define HPC3_PDMACTRL_SEL	0x00000002 /* little endian transfer */
+#define HPC3_PDMACTRL_RCV	0x00000004 /* direction is receive */
+#define HPC3_PDMACTRL_FLSH	0x00000008 /* enable flush for receive DMA */
+#define HPC3_PDMACTRL_ACT	0x00000010 /* start dma transfer */
+#define HPC3_PDMACTRL_LD	0x00000020 /* load enable for ACT */
+#define HPC3_PDMACTRL_RT	0x00000040 /* Use realtime GIO bus servicing */
+#define HPC3_PDMACTRL_HW	0x0000ff00 /* DMA High-water mark */
+#define HPC3_PDMACTRL_FB	0x003f0000 /* Ptr to beginning of fifo */
+#define HPC3_PDMACTRL_FE	0x3f000000 /* Ptr to end of fifo */
+
+	u32 _unused1[0x1000/4 - 1];	/* padding */
+};
+
+/* The HPC3 SCSI registers, this does not include external ones. */
+struct hpc3_scsiregs {
+	volatile u32 cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 ndptr;	/* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 bcd;	/* byte count info */
+#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
+#define HPC3_SBCD_XIE     0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX     0x00008000 /* Indicates this is last buf in chain */
+
+	volatile u32 ctrl;    /* control register */
+#define HPC3_SCTRL_IRQ    0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
+#define HPC3_SCTRL_DIR    0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_FLUSH  0x08 /* Tells HPC3 to flush scsi fifos */
+#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
+#define HPC3_SCTRL_AMASK  0x20 /* DMA active inhibits PIO */
+#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
+#define HPC3_SCTRL_PERR   0x80 /* Bad parity on HPC3 iface to scsi controller */
+
+	volatile u32 gfptr;	/* current GIO fifo ptr */
+	volatile u32 dfptr;	/* current device fifo ptr */
+	volatile u32 dconfig;	/* DMA configuration register */
+#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
+#define HPC3_SDCFG_D1   0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2   0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3   0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
+#define HPC3_SDCFG_HW   0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
+#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
+#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
+#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
+
+	volatile u32 pconfig;	/* PIO configuration register */
+#define HPC3_SPCFG_P3   0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W  0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R  0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1   0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW   0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
+#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
+#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
+
+	u32 _unused1[0x1000/4 - 6];	/* padding */
+};
+
+/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
+struct hpc3_ethregs {
+	/* Receiver registers. */
+	volatile u32 rx_cbptr;   /* current dma buffer ptr, diagnostic use only */
+	volatile u32 rx_ndptr;   /* next dma descriptor ptr */
+	u32 _unused0[0x1000/4 - 2];	/* padding */
+	volatile u32 rx_bcd;	/* byte count info */
+#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
+#define HPC3_ERXBCD_XIE     0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX     0x80000000 /* flags this as end of descriptor chain */
+
+	volatile u32 rx_ctrl;	/* control register */
+#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
+#define HPC3_ERXCTRL_STAT6  0x00000040 /* Rdonly irq status */
+#define HPC3_ERXCTRL_STAT7  0x00000080 /* Rdonlt old/new status bit from Seeq */
+#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
+#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
+#define HPC3_ERXCTRL_AMASK  0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
+#define HPC3_ERXCTRL_RBO    0x00000800 /* Receive buffer overflow if set to 1 */
+
+	volatile u32 rx_gfptr;	/* current GIO fifo ptr */
+	volatile u32 rx_dfptr;	/* current device fifo ptr */
+	u32 _unused1;		/* padding */
+	volatile u32 reset;	/* reset register */
+#define HPC3_ERST_CRESET 0x1	/* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2	/* Clear channel interrupt */
+#define HPC3_ERST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
+
+	volatile u32 dconfig;    /* DMA configuration register */
+#define HPC3_EDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO   0x30000 /* Programmed timeout value for above two */
+
+	volatile u32 pconfig;   /* PIO configuration register */
+#define HPC3_EPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
+
+	u32 _unused2[0x1000/4 - 8];	/* padding */
+
+	/* Transmitter registers. */
+	volatile u32 tx_cbptr;	/* current dma buffer ptr, diagnostic use only */
+	volatile u32 tx_ndptr;	/* next dma descriptor ptr */
+	u32 _unused3[0x1000/4 - 2];	/* padding */
+	volatile u32 tx_bcd;		/* byte count info */
+#define HPC3_ETXBCD_BCNTMSK 0x00003fff	/* bytes to be read from memory */
+#define HPC3_ETXBCD_ESAMP   0x10000000	/* if set, too late to add descriptor */
+#define HPC3_ETXBCD_XIE     0x20000000	/* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP     0x40000000	/* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX     0x80000000	/* This buf is the end of desc chain */
+
+	volatile u32 tx_ctrl;		/* control register */
+#define HPC3_ETXCTRL_STAT30 0x0000000f	/* Rdonly copy of seeq tx stat reg */
+#define HPC3_ETXCTRL_STAT4  0x00000010	/* Indicate late collision occurred */
+#define HPC3_ETXCTRL_STAT75 0x000000e0	/* Rdonly irq status from seeq */
+#define HPC3_ETXCTRL_ENDIAN 0x00000100	/* DMA channel endian mode, 1=little 0=big */
+#define HPC3_ETXCTRL_ACTIVE 0x00000200	/* DMA tx channel is active */
+#define HPC3_ETXCTRL_AMASK  0x00000400	/* Indicates ACTIVE inhibits PIO's */
+
+	volatile u32 tx_gfptr;		/* current GIO fifo ptr */
+	volatile u32 tx_dfptr;		/* current device fifo ptr */
+	u32 _unused4[0x1000/4 - 4];	/* padding */
+};
+
+struct hpc3_regs {
+	/* First regs for the PBUS 8 dma channels. */
+	struct hpc3_pbus_dmacregs pbdma[8];
+
+	/* Now the HPC scsi registers, we get two scsi reg sets. */
+	struct hpc3_scsiregs scsi_chan0, scsi_chan1;
+
+	/* The SEEQ hpc3 ethernet dma/control registers. */
+	struct hpc3_ethregs ethregs;
+
+	/* Here are where the hpc3 fifo's can be directly accessed
+	 * via PIO accesses.  Under normal operation we never stick
+	 * our grubby paws in here so it's just padding. */
+	u32 _unused0[0x18000/4];
+
+	/* HPC3 irq status regs.  Due to a peculiar bug you need to
+	 * look at two different register addresses to get at all of
+	 * the status bits.  The first reg can only reliably report
+	 * bits 4:0 of the status, and the second reg can only
+	 * reliably report bits 9:5 of the hpc3 irq status.  I told
+	 * you it was a peculiar bug. ;-)
+	 */
+	volatile u32 istat0;		/* Irq status, only bits <4:0> reliable. */
+#define HPC3_ISTAT_PBIMASK	0x0ff	/* irq bits for pbus devs 0 --> 7 */
+#define HPC3_ISTAT_SC0MASK	0x100	/* irq bit for scsi channel 0 */
+#define HPC3_ISTAT_SC1MASK	0x200	/* irq bit for scsi channel 1 */
+
+	volatile u32 gio_misc;		/* GIO misc control bits. */
+#define HPC3_GIOMISC_ERTIME	0x1	/* Enable external timer real time. */
+#define HPC3_GIOMISC_DENDIAN	0x2	/* dma descriptor endian, 1=lit 0=big */
+
+	u32 eeprom;			/* EEPROM data reg. */
+#define HPC3_EEPROM_EPROT	0x01	/* Protect register enable */
+#define HPC3_EEPROM_CSEL	0x02	/* Chip select */
+#define HPC3_EEPROM_ECLK	0x04	/* EEPROM clock */
+#define HPC3_EEPROM_DATO	0x08	/* Data out */
+#define HPC3_EEPROM_DATI	0x10	/* Data in */
+
+	volatile u32 istat1;		/* Irq status, only bits <9:5> reliable. */
+	volatile u32 bestat;		/* Bus error interrupt status reg. */
+#define HPC3_BESTAT_BLMASK	0x000ff	/* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE	0x00100	/* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_PIDSHIFT	9
+#define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
+
+	u32 _unused1[0x14000/4 - 5];	/* padding */
+
+	/* Now direct PIO per-HPC3 peripheral access to external regs. */
+	volatile u32 scsi0_ext[256];	/* SCSI channel 0 external regs */
+	u32 _unused2[0x7c00/4];
+	volatile u32 scsi1_ext[256];	/* SCSI channel 1 external regs */
+	u32 _unused3[0x7c00/4];
+	volatile u32 eth_ext[320];	/* Ethernet external registers */
+	u32 _unused4[0x3b00/4];
+
+	/* Per-peripheral device external registers and DMA/PIO control. */
+	volatile u32 pbus_extregs[16][256];
+	volatile u32 pbus_dmacfg[8][128];
+	/* Cycles to spend in D3 for reads */
+#define HPC3_DMACFG_D3R_MASK		0x00000001
+#define HPC3_DMACFG_D3R_SHIFT		0
+	/* Cycles to spend in D4 for reads */
+#define HPC3_DMACFG_D4R_MASK		0x0000001e
+#define HPC3_DMACFG_D4R_SHIFT		1
+	/* Cycles to spend in D5 for reads */
+#define HPC3_DMACFG_D5R_MASK		0x000001e0
+#define HPC3_DMACFG_D5R_SHIFT		5
+	/* Cycles to spend in D3 for writes */
+#define HPC3_DMACFG_D3W_MASK		0x00000200
+#define HPC3_DMACFG_D3W_SHIFT		9
+	/* Cycles to spend in D4 for writes */
+#define HPC3_DMACFG_D4W_MASK		0x00003c00
+#define HPC3_DMACFG_D4W_SHIFT		10
+	/* Cycles to spend in D5 for writes */
+#define HPC3_DMACFG_D5W_MASK		0x0003c000
+#define HPC3_DMACFG_D5W_SHIFT		14
+	/* Enable 16-bit DMA access mode */
+#define HPC3_DMACFG_DS16		0x00040000
+	/* Places halfwords on high 16 bits of bus */
+#define HPC3_DMACFG_EVENHI		0x00080000
+	/* Make this device real time */
+#define HPC3_DMACFG_RTIME		0x00200000
+	/* 5 bit burst count for DMA device */
+#define HPC3_DMACFG_BURST_MASK		0x07c00000
+#define HPC3_DMACFG_BURST_SHIFT	22
+	/* Use live pbus_dreq unsynchronized signal */
+#define HPC3_DMACFG_DRQLIVE		0x08000000
+	volatile u32 pbus_piocfg[16][64];
+	/* Cycles to spend in P2 state for reads */
+#define HPC3_PIOCFG_P2R_MASK		0x00001
+#define HPC3_PIOCFG_P2R_SHIFT		0
+	/* Cycles to spend in P3 state for reads */
+#define HPC3_PIOCFG_P3R_MASK		0x0001e
+#define HPC3_PIOCFG_P3R_SHIFT		1
+	/* Cycles to spend in P4 state for reads */
+#define HPC3_PIOCFG_P4R_MASK		0x001e0
+#define HPC3_PIOCFG_P4R_SHIFT		5
+	/* Cycles to spend in P2 state for writes */
+#define HPC3_PIOCFG_P2W_MASK		0x00200
+#define HPC3_PIOCFG_P2W_SHIFT		9
+	/* Cycles to spend in P3 state for writes */
+#define HPC3_PIOCFG_P3W_MASK		0x03c00
+#define HPC3_PIOCFG_P3W_SHIFT		10
+	/* Cycles to spend in P4 state for writes */
+#define HPC3_PIOCFG_P4W_MASK		0x3c000
+#define HPC3_PIOCFG_P4W_SHIFT		14
+	/* Enable 16-bit PIO accesses */
+#define HPC3_PIOCFG_DS16		0x40000
+	/* Place even address bits in bits <15:8> */
+#define HPC3_PIOCFG_EVENHI		0x80000
+
+	/* PBUS PROM control regs. */
+	volatile u32 pbus_promwe;	/* PROM write enable register */
+#define HPC3_PROM_WENAB	0x1	/* Enable writes to the PROM */
+
+	u32 _unused5[0x0800/4 - 1];
+	volatile u32 pbus_promswap;	/* Chip select swap reg */
+#define HPC3_PROM_SWAP	0x1	/* invert GIO addr bit to select prom0 or prom1 */
+
+	u32 _unused6[0x0800/4 - 1];
+	volatile u32 pbus_gout;	/* PROM general purpose output reg */
+#define HPC3_PROM_STAT	0x1	/* General purpose status bit in gout */
+
+	u32 _unused7[0x1000/4 - 1];
+	volatile u32 rtcregs[14];	/* Dallas clock registers */
+	u32 _unused8[50];
+	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
+};
+
+/*
+ * It is possible to have two HPC3's within the address space on
+ * one machine, though only having one is more likely on an Indy.
+ */
+extern struct hpc3_regs *hpc3c0, *hpc3c1;
+#define HPC3_CHIP0_BASE		0x1fb80000	/* physical */
+#define HPC3_CHIP1_BASE		0x1fb00000	/* physical */
+
+extern void sgihpc_init(void);
+
+#endif /* _SGI_HPC3_H */
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
new file mode 100644
index 0000000..343ed15
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/*
+ * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+	u8 _ctrl1[3];
+	volatile u8 ctrl1;
+	u8 _data1[3];
+	volatile u8 data1;
+	u8 _ctrl2[3];
+	volatile u8 ctrl2;
+	u8 _data2[3];
+	volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _command[3];
+	volatile u8 command;
+};
+
+struct sgint_regs {
+	u8 _istat0[3];
+	volatile u8 istat0;		/* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL	0x01
+#define SGINT_ISTAT0_SCSI0	0x02
+#define SGINT_ISTAT0_SCSI1	0x04
+#define SGINT_ISTAT0_ENET	0x08
+#define SGINT_ISTAT0_GFXDMA	0x10
+#define SGINT_ISTAT0_PPORT	0x20
+#define SGINT_ISTAT0_HPC2	0x40
+#define SGINT_ISTAT0_LIO2	0x80
+	u8 _imask0[3];
+	volatile u8 imask0;		/* Interrupt mask zero */
+	u8 _istat1[3];
+	volatile u8 istat1;		/* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI	0x01
+#define SGINT_ISTAT1_PWR	0x02
+#define SGINT_ISTAT1_ISDNH	0x04
+#define SGINT_ISTAT1_LIO3	0x08
+#define SGINT_ISTAT1_HPC3	0x10
+#define SGINT_ISTAT1_AFAIL	0x20
+#define SGINT_ISTAT1_VIDEO	0x40
+#define SGINT_ISTAT1_GIO2	0x80
+	u8 _imask1[3];
+	volatile u8 imask1;		/* Interrupt mask one */
+	u8 _vmeistat[3];
+	volatile u8 vmeistat;		/* VME interrupt status */
+	u8 _cmeimask0[3];
+	volatile u8 cmeimask0;		/* VME interrupt mask zero */
+	u8 _cmeimask1[3];
+	volatile u8 cmeimask1;		/* VME interrupt mask one */
+	u8 _cmepol[3];
+	volatile u8 cmepol;		/* VME polarity */
+	u8 _tclear[3];
+	volatile u8 tclear;
+	u8 _errstat[3];
+	volatile u8 errstat;	/* Error status reg, reserved on INT2 */
+	u32 _unused0[2];
+	u8 _tcnt0[3];
+	volatile u8 tcnt0;		/* counter 0 */
+	u8 _tcnt1[3];
+	volatile u8 tcnt1;		/* counter 1 */
+	u8 _tcnt2[3];
+	volatile u8 tcnt2;		/* counter 2 */
+	u8 _tcword[3];
+	volatile u8 tcword;		/* control word */
+#define SGINT_TCWORD_BCD	0x01	/* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK	0x0e	/* Mode bitmask. */
+#define SGINT_TCWORD_MITC	0x00	/* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS	0x02	/* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN	0x04	/* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN	0x06	/* Square wave generator mode */
+#define SGINT_TCWORD_MSWST	0x08	/* Software strobe */
+#define SGINT_TCWORD_MHWST	0x0a	/* Hardware strobe */
+#define SGINT_TCWORD_CMASK	0x30	/* Command mask */
+#define SGINT_TCWORD_CLAT	0x00	/* Latch command */
+#define SGINT_TCWORD_CLSB	0x10	/* LSB read/write */
+#define SGINT_TCWORD_CMSB	0x20	/* MSB read/write */
+#define SGINT_TCWORD_CALL	0x30	/* Full counter read/write */
+#define SGINT_TCWORD_CNT0	0x00	/* Select counter zero */
+#define SGINT_TCWORD_CNT1	0x40	/* Select counter one */
+#define SGINT_TCWORD_CNT2	0x80	/* Select counter two */
+#define SGINT_TCWORD_CRBCK	0xc0	/* Readback command */
+};
+
+/*
+ * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK	1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER	((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+	struct pi1_regs pport;
+	u32 _unused0[2];
+	struct sgioc_uart_regs uart;
+	struct sgioc_keyb_regs kbdmouse;
+	u8 _gcsel[3];
+	volatile u8 gcsel;
+	u8 _genctrl[3];
+	volatile u8 genctrl;
+	u8 _panel[3];
+	volatile u8 panel;
+#define SGIOC_PANEL_POWERON	0x01
+#define SGIOC_PANEL_POWERINTR	0x02
+#define SGIOC_PANEL_VOLDNINTR	0x10
+#define SGIOC_PANEL_VOLDNHOLD	0x20
+#define SGIOC_PANEL_VOLUPINTR	0x40
+#define SGIOC_PANEL_VOLUPHOLD	0x80
+	u32 _unused1;
+	u8 _sysid[3];
+	volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE	0x01
+#define SGIOC_SYSID_BOARDREV(x)	(((x) & 0x1e) >> 1)
+#define SGIOC_SYSID_CHIPREV(x)	(((x) & 0xe0) >> 5)
+	u32 _unused2;
+	u8 _read[3];
+	volatile u8 read;
+	u32 _unused3;
+	u8 _dmasel[3];
+	volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ	0x00	/* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB	0x01	/* enable isdn B */
+#define SGIOC_DMASEL_ISDNA	0x02	/* enable isdn A */
+#define SGIOC_DMASEL_PPORT	0x04	/* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ	0x10	/* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT	0x20	/* use external serial clock */
+	u32 _unused4;
+	u8 _reset[3];
+	volatile u8 reset;
+#define SGIOC_RESET_PPORT	0x01	/* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE	0x02	/* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA	0x04	/* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN	0x08	/* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF	0x10	/* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF	0x20	/* guiness: turn led off (green, else amber) */
+	u32 _unused5;
+	u8 _write[3];
+	volatile u8 write;
+#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshhold */
+#define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE	0x10	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE	0x20	/* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO		0x40	/* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI		0x80	/* 1=5.25V 0=+5V */
+	u32 _unused6;
+	struct sgint_regs int3;
+	u32 _unused7[16];
+	volatile u32 extio;		/* FullHouse only */
+#define EXTIO_S0_IRQ_3		0x8000	/* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2		0x4000	/* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1		0x2000	/* S0: gfx.int */
+#define EXTIO_S0_RETRACE	0x1000
+#define EXTIO_SG_IRQ_3		0x0800	/* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2		0x0400	/* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1		0x0200	/* SG: gfx.int */
+#define EXTIO_SG_RETRACE	0x0100
+#define EXTIO_GIO_33MHZ		0x0080
+#define EXTIO_EISA_BUSERR	0x0040
+#define EXTIO_MC_BUSERR		0x0020
+#define EXTIO_HPC3_BUSERR	0x0010
+#define EXTIO_S0_STAT_1		0x0008
+#define EXTIO_S0_STAT_0		0x0004
+#define EXTIO_SG_STAT_1		0x0002
+#define EXTIO_SG_STAT_0		0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif
diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h
new file mode 100644
index 0000000..c0501f9
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ip22.h
@@ -0,0 +1,78 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ip22.h: Definitions for SGI IP22 machines
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ */
+
+#ifndef _SGI_IP22_H
+#define _SGI_IP22_H
+
+/*
+ * These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
+ * are not supported this way. Driver is supposed to allocate HPC/MC
+ * interrupt as shareable and then look to proper status bit (see
+ * HAL2 driver). This will prevent many complications, trust me ;-)
+ */
+
+#include <irq.h>
+#include <asm/sgi/ioc.h>
+
+#define SGINT_EISA	0	/* 16 EISA irq levels (Indigo2) */
+#define SGINT_CPU	MIPS_CPU_IRQ_BASE	/* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0	(SGINT_CPU+8)	/* 8 local0 irq levels */
+#define SGINT_LOCAL1	(SGINT_CPU+16)	/* 8 local1 irq levels */
+#define SGINT_LOCAL2	(SGINT_CPU+24)	/* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3	(SGINT_CPU+32)	/* 8 local3 vectored irq levels */
+#define SGINT_END	(SGINT_CPU+40)	/* End of 'spaces' */
+
+/*
+ * Individual interrupt definitions for the Indy and Indigo2
+ */
+
+#define SGI_SOFT_0_IRQ	SGINT_CPU + 0
+#define SGI_SOFT_1_IRQ	SGINT_CPU + 1
+#define SGI_LOCAL_0_IRQ	SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ	SGINT_CPU + 3
+#define SGI_8254_0_IRQ	SGINT_CPU + 4
+#define SGI_8254_1_IRQ	SGINT_CPU + 5
+#define SGI_BUSERR_IRQ	SGINT_CPU + 6
+#define SGI_TIMER_IRQ	SGINT_CPU + 7
+
+#define SGI_FIFO_IRQ	SGINT_LOCAL0 + 0	/* FIFO full */
+#define SGI_GIO_0_IRQ	SGI_FIFO_IRQ		/* GIO-0 */
+#define SGI_WD93_0_IRQ	SGINT_LOCAL0 + 1	/* 1st onboard WD93 */
+#define SGI_WD93_1_IRQ	SGINT_LOCAL0 + 2	/* 2nd onboard WD93 */
+#define SGI_ENET_IRQ	SGINT_LOCAL0 + 3	/* onboard ethernet */
+#define SGI_MCDMA_IRQ	SGINT_LOCAL0 + 4	/* MC DMA done */
+#define SGI_PARPORT_IRQ	SGINT_LOCAL0 + 5	/* Parallel port */
+#define SGI_GIO_1_IRQ	SGINT_LOCAL0 + 6	/* GE / GIO-1 / 2nd-HPC */
+#define SGI_MAP_0_IRQ	SGINT_LOCAL0 + 7	/* Mappable interrupt 0 */
+
+#define SGI_GPL0_IRQ	SGINT_LOCAL1 + 0	/* General Purpose LOCAL1_N<0> */
+#define SGI_PANEL_IRQ	SGINT_LOCAL1 + 1	/* front panel */
+#define SGI_GPL2_IRQ	SGINT_LOCAL1 + 2	/* General Purpose LOCAL1_N<2> */
+#define SGI_MAP_1_IRQ	SGINT_LOCAL1 + 3	/* Mappable interrupt 1 */
+#define SGI_HPCDMA_IRQ	SGINT_LOCAL1 + 4	/* HPC DMA done */
+#define SGI_ACFAIL_IRQ	SGINT_LOCAL1 + 5	/* AC fail */
+#define SGI_VINO_IRQ	SGINT_LOCAL1 + 6	/* Indy VINO */
+#define SGI_GIO_2_IRQ	SGINT_LOCAL1 + 7	/* Vert retrace / GIO-2 */
+
+/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */
+#define SGI_VERT_IRQ	SGINT_LOCAL2 + 0	/* INT3: newport vertical status */
+#define SGI_EISA_IRQ	SGINT_LOCAL2 + 3	/* EISA interrupts */
+#define SGI_KEYBD_IRQ	SGINT_LOCAL2 + 4	/* keyboard */
+#define SGI_SERIAL_IRQ	SGINT_LOCAL2 + 5	/* onboard serial */
+
+#define ip22_is_fullhouse()	(sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
+
+extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg);
+extern unsigned short ip22_nvram_read(int reg);
+
+#endif
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
new file mode 100644
index 0000000..1576c23
--- /dev/null
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+	u32 _unused0;
+	volatile u32 cpuctrl0;	/* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS	0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH	0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO	0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM	0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU	0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG	0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT	0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET	0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK	0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD	0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB	0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP	0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR	0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM	0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN	0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM	0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR	0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB	0x08000000 /* Allow GIO back to back writes */
+	u32 _unused1;
+	volatile u32 cpuctrl1;	/* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO	0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC	0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC	0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0	0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0	0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1	0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1	0x00020000 /* Little endian EXP1 */
+
+	u32 _unused2;
+	volatile u32 watchdogt;	/* Watchdog reg rdonly, write clears */
+
+	u32 _unused3;
+	volatile u32 systemid;	/* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV	0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT	0x00000010 /* Indicates presence of EISA bus */
+
+	u32 _unused4[3];
+	volatile u32 divider;	/* Divider reg for RPSS */
+
+	u32 _unused5;
+	u32 eeprom;		/* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE	0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL	0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK	0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO	0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI	0x00000010 /* Serial EEPROM data-in */
+
+	u32 _unused6[3];
+	volatile u32 rcntpre;	/* Preload refresh counter */
+
+	u32 _unused7;
+	volatile u32 rcounter;	/* Readonly refresh counter */
+
+	u32 _unused8[13];
+	volatile u32 giopar;	/* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64	0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64	0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064	0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164	0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64	0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264	0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX	0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0	0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1	0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA	0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS	0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX	0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0	0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1	0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0	0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1	0x00008000 /* EXP(slot1) has pipeline attr */
+
+	u32 _unused9;
+	volatile u32 cputp;	/* CPU bus arb time period */
+
+	u32 _unused10[3];
+	volatile u32 lbursttp;	/* Time period for long bursts */
+
+	/* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+	 * be the same size. The size encoding for supported SIMMs is bellow */
+	u32 _unused11[9];
+	volatile u32 mconfig0;	/* Memory config register zero */
+	u32 _unused12;
+	volatile u32 mconfig1;	/* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR	0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK	0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID	0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS	0x00004000 /* Number of subbanks */
+
+	u32 _unused13;
+	volatile u32 cmacc;        /* Mem access config for CPU */
+	u32 _unused14;
+	volatile u32 gmacc;        /* Mem access config for GIO */
+
+	/* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG	0x20000000 /* 512MB home for alias */
+
+	/* Error address/status regs from GIO and CPU perspectives. */
+	u32 _unused15;
+	volatile u32 cerr;	/* Error address reg for CPU */
+	u32 _unused16;
+	volatile u32 cstat;	/* Status reg for CPU */
+#define SGIMC_CSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR		0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR	0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR	0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR	0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA	0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK	0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR	(SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+	u32 _unused17;
+	volatile u32 gerr;	/* Error address reg for GIO */
+	u32 _unused18;
+	volatile u32 gstat;	/* Status reg for GIO */
+#define SGIMC_GSTAT_RD		0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR		0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME	0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM	0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR	0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC		0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD	0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR	0x00008000 /* write data parity on pio */
+
+	/* Special hard bus locking registers. */
+	u32 _unused19;
+	volatile u32 syssembit;		/* Uni-bit system semaphore */
+	u32 _unused20;
+	volatile u32 mlock;		/* Global GIO memory access lock */
+	u32 _unused21;
+	volatile u32 elock;		/* Locks EISA from GIO accesses */
+
+	/* GIO dma control registers. */
+	u32 _unused22[15];
+	volatile u32 gio_dma_trans;	/* DMA mask to translation GIO addrs */
+	u32 _unused23;
+	volatile u32 gio_dma_sbits;	/* DMA GIO addr substitution bits */
+	u32 _unused24;
+	volatile u32 dma_intr_cause;	/* DMA IRQ cause indicator bits */
+	u32 _unused25;
+	volatile u32 dma_ctrl;		/* Main DMA control reg */
+
+	/* DMA TLB entry 0 */
+	u32 _unused26[5];
+	volatile u32 dtlb_hi0;
+	u32 _unused27;
+	volatile u32 dtlb_lo0;
+
+	/* DMA TLB entry 1 */
+	u32 _unused28;
+	volatile u32 dtlb_hi1;
+	u32 _unused29;
+	volatile u32 dtlb_lo1;
+
+	/* DMA TLB entry 2 */
+	u32 _unused30;
+	volatile u32 dtlb_hi2;
+	u32 _unused31;
+	volatile u32 dtlb_lo2;
+
+	/* DMA TLB entry 3 */
+	u32 _unused32;
+	volatile u32 dtlb_hi3;
+	u32 _unused33;
+	volatile u32 dtlb_lo3;
+
+	u32 _unused34[0x0392];
+
+	u32 _unused35;
+	volatile u32 rpsscounter;	/* Chirps at 100ns */
+
+	u32 _unused36[0x1000/4-2*4];
+
+	u32 _unused37;
+	volatile u32 maddronly;		/* Address DMA goes at */
+	u32 _unused38;
+	volatile u32 maddrpdeflts;	/* Same as above, plus set defaults */
+	u32 _unused39;
+	volatile u32 dmasz;		/* DMA count */
+	u32 _unused40;
+	volatile u32 ssize;		/* DMA stride size */
+	u32 _unused41;
+	volatile u32 gmaddronly;	/* Set GIO DMA but don't start trans */
+	u32 _unused42;
+	volatile u32 dmaddnpgo;		/* Set GIO DMA addr + start transfer */
+	u32 _unused43;
+	volatile u32 dmamode;		/* DMA mode config bit settings */
+	u32 _unused44;
+	volatile u32 dmaccount;		/* Zoom and byte count for DMA */
+	u32 _unused45;
+	volatile u32 dmastart;		/* Pedal to the metal. */
+	u32 _unused46;
+	volatile u32 dmarunning;	/* DMA op is in progress */
+	u32 _unused47;
+	volatile u32 maddrdefstart;	/* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE		0x1fa00000	/* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR	0x08000000
+#define SGIMC_SEG1_BADDR	0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL		0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22	0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28	0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */
diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h
new file mode 100644
index 0000000..c950691
--- /dev/null
+++ b/arch/mips/include/asm/sgi/pi1.h
@@ -0,0 +1,71 @@
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+	u8 _data[3];
+	volatile u8 data;
+	u8 _ctrl[3];
+	volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N	0x01
+#define PI1_CTRL_AFD_N		0x02
+#define PI1_CTRL_INIT_N		0x04
+#define PI1_CTRL_SLIN_N		0x08
+#define PI1_CTRL_IRQ_ENA	0x10
+#define PI1_CTRL_DIR		0x20
+#define PI1_CTRL_SEL		0x40
+	u8 _status[3];
+	volatile u8 status;
+#define PI1_STAT_DEVID		0x03	/* bits 0-1 */
+#define PI1_STAT_NOINK		0x04	/* SGI MODE only */
+#define PI1_STAT_ERROR		0x08
+#define PI1_STAT_ONLINE		0x10
+#define PI1_STAT_PE		0x20
+#define PI1_STAT_ACK		0x40
+#define PI1_STAT_BUSY		0x80
+	u8 _dmactrl[3];
+	volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY	0x01    /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT	0x02    /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE	0x00    /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE	0x04    /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE	0x08    /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE	0x0c    /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE	0x10    /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR	0x20    /* clear fifo W/O */
+#define PI1_DMACTRL_READ	0x40    /* read */
+#define PI1_DMACTRL_RUN		0x80    /* pedal to the metal */
+	u8 _intstat[3];
+	volatile u8 intstat;
+#define PI1_INTSTAT_ACK		0x04
+#define PI1_INTSTAT_FEMPTY	0x08
+#define PI1_INTSTAT_NOINK	0x10
+#define PI1_INTSTAT_ONLINE	0x20
+#define PI1_INTSTAT_ERR		0x40
+#define PI1_INTSTAT_PE		0x80
+	u8 _intmask[3];
+	volatile u8 intmask;		/* enabled low, reset high*/
+#define PI1_INTMASK_ACK		0x04
+#define PI1_INTMASK_FIFO_EMPTY	0x08
+#define PI1_INTMASK_NOINK	0x10
+#define PI1_INTMASK_ONLINE	0x20
+#define PI1_INTMASK_ERR		0x40
+#define PI1_INTMASK_PE		0x80
+	u8 _timer1[3];
+	volatile u8 timer1;
+#define PI1_TIME1		0x27
+	u8 _timer2[3];
+	volatile u8 timer2;
+#define PI1_TIME2		0x13
+	u8 _timer3[3];
+	volatile u8 timer3;
+#define PI1_TIME3		0x10
+	u8 _timer4[3];
+	volatile u8 timer4;
+#define PI1_TIME4		0x00
+};
+
+#endif
diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h
new file mode 100644
index 0000000..af0ffd7
--- /dev/null
+++ b/arch/mips/include/asm/sgi/seeq.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_SEEQ_H
+#define __ASM_SGI_SEEQ_H
+
+#include <linux/if_ether.h>
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiseeq_platform_data {
+	struct hpc3_regs *hpc;
+	unsigned int irq;
+	unsigned char mac[ETH_ALEN];
+};
+
+#endif /* __ASM_SGI_SEEQ_H */
diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h
new file mode 100644
index 0000000..645cea7
--- /dev/null
+++ b/arch/mips/include/asm/sgi/sgi.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * sgi.h: Definitions specific to SGI machines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@sgi.com)
+ */
+#ifndef _ASM_SGI_SGI_H
+#define _ASM_SGI_SGI_H
+
+/* UP=UniProcessor MP=MultiProcessor(capable) */
+enum sgi_mach {
+	ip4,	/* R2k UP */
+	ip5,	/* R2k MP */
+	ip6,	/* R3k UP */
+	ip7,	/* R3k MP */
+	ip9,	/* R3k UP */
+	ip12,	/* R3kA UP, Indigo */
+	ip15,	/* R3kA MP */
+	ip17,	/* R4K UP */
+	ip19,	/* R4K MP */
+	ip20,	/* R4K UP, Indigo */
+	ip21,	/* TFP MP */
+	ip22,	/* R4x00 UP, Indigo2 */
+	ip25,	/* R10k MP */
+	ip26,	/* TFP UP, Indigo2 */
+	ip27,	/* R10k MP, R12k MP, Origin */
+	ip28,	/* R10k UP, Indigo2 */
+	ip30,	/* Octane */
+	ip32,	/* O2 */
+};
+
+extern enum sgi_mach sgimach;
+extern void sgi_sysinit(void);
+
+/* Many I/O space registers are byte sized and are contained within
+ * one byte per word, specifically the MSB, this macro helps out.
+ */
+#ifdef __MIPSEL__
+#define SGI_MSB(regaddr)   (regaddr)
+#else
+#define SGI_MSB(regaddr)   ((regaddr) | 0x3)
+#endif
+
+#endif /* _ASM_SGI_SGI_H */
diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h
new file mode 100644
index 0000000..0d6c3a4
--- /dev/null
+++ b/arch/mips/include/asm/sgi/wd.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_WD_H
+#define __ASM_SGI_WD_H
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiwd93_platform_data {
+	unsigned int unit;
+	unsigned int irq;
+	struct hpc3_scsiregs *hregs;
+	unsigned char *wdregs;
+};
+
+#endif /* __ASM_SGI_WD_H */
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
new file mode 100644
index 0000000..bfce5c7
--- /dev/null
+++ b/arch/mips/include/asm/sgialib.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI ARCS firmware interface library for the Linux kernel.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGIALIB_H
+#define _ASM_SGIALIB_H
+
+#include <asm/sgiarcs.h>
+
+extern struct linux_romvec *romvec;
+extern int prom_argc;
+
+extern LONG *_prom_argv, *_prom_envp;
+
+/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer.
+   These macros take care of sign extension.  */
+#define prom_argv(index) ((char *) (long) _prom_argv[(index)])
+#define prom_argc(index) ((char *) (long) _prom_argc[(index)])
+
+extern int prom_flags;
+
+#define PROM_FLAG_ARCS			1
+#define PROM_FLAG_USE_AS_CONSOLE	2
+#define PROM_FLAG_DONT_FREE_TEMP	4
+
+/* Simple char-by-char console I/O. */
+extern void prom_putchar(char c);
+extern char prom_getchar(void);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS    32
+struct prom_pmemblock {
+	LONG	base;		/* Within KSEG0 or XKPHYS. */
+	ULONG	size;		/* In bytes. */
+	ULONG	type;		/* free or prom memory */
+};
+
+/* Get next memory descriptor after CURR, returns first descriptor
+ * in chain is CURR is NULL.
+ */
+extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
+#define PROM_NULL_MDESC   ((struct linux_mdesc *) 0)
+
+/* Called by prom_init to setup the physical memory pmemblock
+ * array.
+ */
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+
+/* PROM device tree library routines. */
+#define PROM_NULL_COMPONENT ((pcomponent *) 0)
+
+/* Get sibling component of THIS. */
+extern pcomponent *ArcGetPeer(pcomponent *this);
+
+/* Get child component of THIS. */
+extern pcomponent *ArcGetChild(pcomponent *this);
+
+/* Get parent component of CHILD. */
+extern pcomponent *prom_getparent(pcomponent *child);
+
+/* Copy component opaque data of component THIS into BUFFER
+ * if component THIS has opaque data.  Returns success or
+ * failure status.
+ */
+extern long prom_getcdata(void *buffer, pcomponent *this);
+
+/* Other misc. component routines. */
+extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
+extern long prom_delcomponent(pcomponent *this);
+extern pcomponent *prom_componentbypath(char *path);
+
+/* This is called at prom_init time to identify the
+ * ARC architecture we are running on
+ */
+extern void prom_identify_arch(void);
+
+/* Environment variable routines. */
+extern PCHAR ArcGetEnvironmentVariable(PCHAR name);
+extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
+
+/* ARCS command line acquisition and parsing. */
+extern char *prom_getcmdline(void);
+extern void prom_init_cmdline(void);
+
+/* Acquiring info about the current time, etc. */
+extern struct linux_tinfo *prom_gettinfo(void);
+extern unsigned long prom_getrtime(void);
+
+/* File operations. */
+extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
+extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
+extern long prom_close(unsigned long fd);
+extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_getrstatus(unsigned long fd);
+extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
+extern long prom_mount(char *name, enum linux_mountops op);
+extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
+extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
+
+/* Running stand-along programs. */
+extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
+extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
+extern long prom_exec(char *name, long argc, char **argv, char **envp);
+
+/* Misc. routines. */
+extern VOID prom_halt(VOID) __attribute__((noreturn));
+extern VOID prom_powerdown(VOID) __attribute__((noreturn));
+extern VOID prom_restart(VOID) __attribute__((noreturn));
+extern VOID ArcReboot(VOID) __attribute__((noreturn));
+extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
+extern long prom_cfgsave(VOID);
+extern struct linux_sysid *prom_getsysid(VOID);
+extern VOID ArcFlushAllCaches(VOID);
+extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
+
+#endif /* _ASM_SGIALIB_H */
diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h
new file mode 100644
index 0000000..721327f
--- /dev/null
+++ b/arch/mips/include/asm/sgiarcs.h
@@ -0,0 +1,548 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ARC firmware interface defines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SGIARCS_H
+#define _ASM_SGIARCS_H
+
+#include <asm/types.h>
+#include <asm/fw/arc/types.h>
+
+/* Various ARCS error codes. */
+#define PROM_ESUCCESS                   0x00
+#define PROM_E2BIG                      0x01
+#define PROM_EACCESS                    0x02
+#define PROM_EAGAIN                     0x03
+#define PROM_EBADF                      0x04
+#define PROM_EBUSY                      0x05
+#define PROM_EFAULT                     0x06
+#define PROM_EINVAL                     0x07
+#define PROM_EIO                        0x08
+#define PROM_EISDIR                     0x09
+#define PROM_EMFILE                     0x0a
+#define PROM_EMLINK                     0x0b
+#define PROM_ENAMETOOLONG               0x0c
+#define PROM_ENODEV                     0x0d
+#define PROM_ENOENT                     0x0e
+#define PROM_ENOEXEC                    0x0f
+#define PROM_ENOMEM                     0x10
+#define PROM_ENOSPC                     0x11
+#define PROM_ENOTDIR                    0x12
+#define PROM_ENOTTY                     0x13
+#define PROM_ENXIO                      0x14
+#define PROM_EROFS                      0x15
+/* SGI ARCS specific errno's. */
+#define PROM_EADDRNOTAVAIL              0x1f
+#define PROM_ETIMEDOUT                  0x20
+#define PROM_ECONNABORTED               0x21
+#define PROM_ENOCONNECT                 0x22
+
+/* Device classes, types, and identifiers for prom
+ * device inventory queries.
+ */
+enum linux_devclass {
+	system, processor, cache, adapter, controller, peripheral, memory
+};
+
+enum linux_devtypes {
+	/* Generic stuff. */
+	Arc, Cpu, Fpu,
+
+	/* Primary insn and data caches. */
+	picache, pdcache,
+
+	/* Secondary insn, data, and combined caches. */
+	sicache, sdcache, sccache,
+
+	memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter,
+	multifunc_adapter, dsk_controller, tp_controller, cdrom_controller,
+	worm_controller, serial_controller, net_controller, disp_controller,
+	parallel_controller, ptr_controller, kbd_controller, audio_controller,
+	misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral,
+	modem_peripheral, monitor_peripheral, printer_peripheral,
+	ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral,
+	net_peripheral, misc_peripheral, anon
+};
+
+enum linux_identifier {
+	bogus, ronly, removable, consin, consout, input, output
+};
+
+/* A prom device tree component. */
+struct linux_component {
+	enum linux_devclass     class;	/* node class */
+	enum linux_devtypes     type;	/* node type */
+	enum linux_identifier   iflags;	/* node flags */
+	USHORT 			vers;	/* node version */
+	USHORT 			rev;	/* node revision */
+	ULONG 			key;	/* completely magic */
+	ULONG 			amask;	/* XXX affinity mask??? */
+	ULONG			cdsize;	/* size of configuration data */
+	ULONG			ilen;	/* length of string identifier */
+	_PULONG			iname;	/* string identifier */
+};
+typedef struct linux_component pcomponent;
+
+struct linux_sysid {
+	char vend[8], prod[8];
+};
+
+/* ARCS prom memory descriptors. */
+enum arcs_memtypes {
+	arcs_eblock,  /* exception block */
+	arcs_rvpage,  /* ARCS romvec page */
+	arcs_fcontig, /* Contiguous and free */
+	arcs_free,    /* Generic free memory */
+	arcs_bmem,    /* Borken memory, don't use */
+	arcs_prog,    /* A loaded program resides here */
+	arcs_atmp,    /* ARCS temporary storage area, wish Sparc OpenBoot told this */
+	arcs_aperm,   /* ARCS permanent storage... */
+};
+
+/* ARC has slightly different types than ARCS */
+enum arc_memtypes {
+	arc_eblock,  /* exception block */
+	arc_rvpage,  /* romvec page */
+	arc_free,    /* Generic free memory */
+	arc_bmem,    /* Borken memory, don't use */
+	arc_prog,    /* A loaded program resides here */
+	arc_atmp,    /* temporary storage area */
+	arc_aperm,   /* permanent storage */
+	arc_fcontig, /* Contiguous and free */
+};
+
+union linux_memtypes {
+    enum arcs_memtypes arcs;
+    enum arc_memtypes arc;
+};
+
+struct linux_mdesc {
+	union linux_memtypes type;
+	ULONG base;
+	ULONG pages;
+};
+
+/* Time of day descriptor. */
+struct linux_tinfo {
+	unsigned short yr;
+	unsigned short mnth;
+	unsigned short day;
+	unsigned short hr;
+	unsigned short min;
+	unsigned short sec;
+	unsigned short msec;
+};
+
+/* ARCS virtual dirents. */
+struct linux_vdirent {
+	ULONG namelen;
+	unsigned char attr;
+	char fname[32]; /* XXX imperical, should be a define */
+};
+
+/* Other stuff for files. */
+enum linux_omode {
+	rdonly, wronly, rdwr, wronly_creat, rdwr_creat,
+	wronly_ssede, rdwr_ssede, dirent, dirent_creat
+};
+
+enum linux_seekmode {
+	absolute, relative
+};
+
+enum linux_mountops {
+	media_load, media_unload
+};
+
+/* This prom has a bolixed design. */
+struct linux_bigint {
+#ifdef __MIPSEL__
+	u32 lo;
+	s32 hi;
+#else /* !(__MIPSEL__) */
+	s32 hi;
+	u32 lo;
+#endif
+};
+
+struct linux_finfo {
+	struct linux_bigint   begin;
+	struct linux_bigint   end;
+	struct linux_bigint   cur;
+	enum linux_devtypes   dtype;
+	unsigned long         namelen;
+	unsigned char         attr;
+	char                  name[32]; /* XXX imperical, should be define */
+};
+
+/* This describes the vector containing function pointers to the ARC
+   firmware functions.  */
+struct linux_romvec {
+	LONG	load;			/* Load an executable image. */
+	LONG	invoke;			/* Invoke a standalong image. */
+	LONG	exec;			/* Load and begin execution of a
+					   standalone image. */
+	LONG	halt;			/* Halt the machine. */
+	LONG	pdown;			/* Power down the machine. */
+	LONG	restart;		/* XXX soft reset??? */
+	LONG	reboot;			/* Reboot the machine. */
+	LONG	imode;			/* Enter PROM interactive mode. */
+	LONG	_unused1;		/* Was ReturnFromMain(). */
+
+	/* PROM device tree interface. */
+	LONG	next_component;
+	LONG	child_component;
+	LONG	parent_component;
+	LONG	component_data;
+	LONG	child_add;
+	LONG	comp_del;
+	LONG	component_by_path;
+
+	/* Misc. stuff. */
+	LONG	cfg_save;
+	LONG	get_sysid;
+
+	/* Probing for memory. */
+	LONG	get_mdesc;
+	LONG	_unused2;		/* was Signal() */
+
+	LONG	get_tinfo;
+	LONG	get_rtime;
+
+	/* File type operations. */
+	LONG	get_vdirent;
+	LONG	open;
+	LONG	close;
+	LONG	read;
+	LONG	get_rstatus;
+	LONG	write;
+	LONG	seek;
+	LONG	mount;
+
+	/* Dealing with firmware environment variables. */
+	LONG	get_evar;
+	LONG	set_evar;
+
+	LONG	get_finfo;
+	LONG	set_finfo;
+
+	/* Miscellaneous. */
+	LONG	cache_flush;
+	LONG	TestUnicodeCharacter;		/* ARC; not sure if ARCS too */
+	LONG	GetDisplayStatus;
+};
+
+/* The SGI ARCS parameter block is in a fixed location for standalone
+ * programs to access PROM facilities easily.
+ */
+typedef struct _SYSTEM_PARAMETER_BLOCK {
+	ULONG			magic;		/* magic cookie */
+#define PROMBLOCK_MAGIC      0x53435241
+
+	ULONG			len;		/* length of parm block */
+	USHORT			ver;		/* ARCS firmware version */
+	USHORT			rev;		/* ARCS firmware revision */
+	_PLONG			rs_block;	/* Restart block. */
+	_PLONG			dbg_block;	/* Debug block. */
+	_PLONG			gevect;		/* XXX General vector??? */
+	_PLONG			utlbvect;	/* XXX UTLB vector??? */
+	ULONG			rveclen;	/* Size of romvec struct. */
+	_PVOID			romvec;		/* Function interface. */
+	ULONG			pveclen;	/* Length of private vector. */
+	_PVOID			pvector;	/* Private vector. */
+	ULONG			adap_cnt;	/* Adapter count. */
+	ULONG			adap_typ0;	/* First adapter type. */
+	ULONG			adap_vcnt0;	/* Adapter 0 vector count. */
+	_PVOID			adap_vector;	/* Adapter 0 vector ptr. */
+	ULONG			adap_typ1;	/* Second adapter type. */
+	ULONG			adap_vcnt1;	/* Adapter 1 vector count. */
+	_PVOID			adap_vector1;	/* Adapter 1 vector ptr. */
+	/* More adapter vectors go here... */
+} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK;
+
+#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000)
+#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec)
+
+/* Cache layout parameter block. */
+union linux_cache_key {
+	struct param {
+#ifdef __MIPSEL__
+		unsigned short size;
+		unsigned char lsize;
+		unsigned char bsize;
+#else /* !(__MIPSEL__) */
+		unsigned char bsize;
+		unsigned char lsize;
+		unsigned short size;
+#endif
+	} info;
+	unsigned long allinfo;
+};
+
+/* Configuration data. */
+struct linux_cdata {
+	char *name;
+	int mlen;
+	enum linux_devtypes type;
+};
+
+/* Common SGI ARCS firmware file descriptors. */
+#define SGIPROM_STDIN     0
+#define SGIPROM_STDOUT    1
+
+/* Common SGI ARCS firmware file types. */
+#define SGIPROM_ROFILE    0x01  /* read-only file */
+#define SGIPROM_HFILE     0x02  /* hidden file */
+#define SGIPROM_SFILE     0x04  /* System file */
+#define SGIPROM_AFILE     0x08  /* Archive file */
+#define SGIPROM_DFILE     0x10  /* Directory file */
+#define SGIPROM_DELFILE   0x20  /* Deleted file */
+
+/* SGI ARCS boot record information. */
+struct sgi_partition {
+	unsigned char flag;
+#define SGIPART_UNUSED 0x00
+#define SGIPART_ACTIVE 0x80
+
+	unsigned char shead, ssect, scyl; /* unused */
+	unsigned char systype; /* OS type, Irix or NT */
+	unsigned char ehead, esect, ecyl; /* unused */
+	unsigned char rsect0, rsect1, rsect2, rsect3;
+	unsigned char tsect0, tsect1, tsect2, tsect3;
+};
+
+#define SGIBBLOCK_MAGIC   0xaa55
+#define SGIBBLOCK_MAXPART 0x0004
+
+struct sgi_bootblock {
+	unsigned char _unused[446];
+	struct sgi_partition partitions[SGIBBLOCK_MAXPART];
+	unsigned short magic;
+};
+
+/* BIOS parameter block. */
+struct sgi_bparm_block {
+	unsigned short bytes_sect;    /* bytes per sector */
+	unsigned char  sect_clust;    /* sectors per cluster */
+	unsigned short sect_resv;     /* reserved sectors */
+	unsigned char  nfats;         /* # of allocation tables */
+	unsigned short nroot_dirents; /* # of root directory entries */
+	unsigned short sect_volume;   /* sectors in volume */
+	unsigned char  media_type;    /* media descriptor */
+	unsigned short sect_fat;      /* sectors per allocation table */
+	unsigned short sect_track;    /* sectors per track */
+	unsigned short nheads;        /* # of heads */
+	unsigned short nhsects;       /* # of hidden sectors */
+};
+
+struct sgi_bsector {
+	unsigned char   jmpinfo[3];
+	unsigned char   manuf_name[8];
+	struct sgi_bparm_block info;
+};
+
+/* Debugging block used with SGI symmon symbolic debugger. */
+#define SMB_DEBUG_MAGIC   0xfeeddead
+struct linux_smonblock {
+	unsigned long   magic;
+	void            (*handler)(void);  /* Breakpoint routine. */
+	unsigned long   dtable_base;       /* Base addr of dbg table. */
+	int             (*printf)(const char *fmt, ...);
+	unsigned long   btable_base;       /* Breakpoint table. */
+	unsigned long   mpflushreqs;       /* SMP cache flush request list. */
+	unsigned long   ntab;              /* Name table. */
+	unsigned long   stab;              /* Symbol table. */
+	int             smax;              /* Max # of symbols. */
+};
+
+/*
+ * Macros for calling a 32-bit ARC implementation from 64-bit code
+ */
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32)
+
+#define __arc_clobbers							\
+	"$2", "$3" /* ... */, "$8", "$9", "$10", "$11", 			\
+	"$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31"
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec)							\
+	: __arc_clobbers, "$4", "$5", "$6", "$7");			\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL1(dest, a1)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1)					\
+	: __arc_clobbers, "$5", "$6", "$7");				\
+	(unsigned long) __res;						\
+})
+
+#define ARC_CALL2(dest, a1, a2)						\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2)				\
+	: __arc_clobbers, "$6", "$7");					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest, a1, a2, a3)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3)		\
+	: __arc_clobbers, "$7");					\
+	__res;								\
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), 		\
+	  "r" (__a4)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5)					\
+({	long __res;							\
+	register signed int __a1 __asm__("$4") = (int) (long) (a1);	\
+	register signed int __a2 __asm__("$5") = (int) (long) (a2);	\
+	register signed int __a3 __asm__("$6") = (int) (long) (a3);	\
+	register signed int __a4 __asm__("$7") = (int) (long) (a4);	\
+	register signed int __a5 = (int) (long) (a5);			\
+	long __vec = (long) romvec->dest;				\
+	__asm__ __volatile__(						\
+	"dsubu\t$29, 32\n\t"						\
+	"sw\t%7, 16($29)\n\t"						\
+	"jalr\t%1\n\t"							\
+	"daddu\t$29, 32\n\t"						\
+	"move\t%0, $2"							\
+	: "=r" (__res), "=r" (__vec)					\
+	: "1" (__vec), 							\
+	  "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), 		\
+	  "r" (__a5)							\
+	: __arc_clobbers);						\
+	__res;								\
+})
+
+#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */
+
+#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) ||		\
+    (defined(CONFIG_64BIT) && defined(CONFIG_ARC64))
+
+#define ARC_CALL0(dest)							\
+({	long __res;							\
+	long (*__vec)(void) = (void *) romvec->dest;			\
+									\
+	__res = __vec();						\
+	__res;								\
+})
+
+#define ARC_CALL1(dest, a1)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long (*__vec)(long) = (void *) romvec->dest;			\
+									\
+	__res = __vec(__a1);						\
+	__res;								\
+})
+
+#define ARC_CALL2(dest, a1, a2)						\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long (*__vec)(long, long) = (void *) romvec->dest;		\
+									\
+	__res = __vec(__a1, __a2);					\
+	__res;								\
+})
+
+#define ARC_CALL3(dest, a1, a2, a3)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long (*__vec)(long, long, long)	= (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3);				\
+	__res;								\
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4)					\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long (*__vec)(long, long, long, long) = (void *) romvec->dest;	\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4);				\
+	__res;								\
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5)				\
+({	long __res;							\
+	long __a1 = (long) (a1);					\
+	long __a2 = (long) (a2);					\
+	long __a3 = (long) (a3);					\
+	long __a4 = (long) (a4);					\
+	long __a5 = (long) (a5);					\
+	long (*__vec)(long, long, long, long, long);			\
+	__vec = (void *) romvec->dest;					\
+									\
+	__res = __vec(__a1, __a2, __a3, __a4, __a5);			\
+	__res;								\
+})
+#endif /* both kernel and ARC either 32-bit or 64-bit */
+
+#endif /* _ASM_SGIARCS_H */
diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h
new file mode 100644
index 0000000..876442f
--- /dev/null
+++ b/arch/mips/include/asm/sgidefs.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_SGIDEFS_H
+#define __ASM_SGIDEFS_H
+
+/*
+ * Using a Linux compiler for building Linux seems logic but not to
+ * everybody.
+ */
+#ifndef __linux__
+#error Use a Linux compiler or give up.
+#endif
+
+/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
+ * MIPS ISAs are no longer subsets of each other.  Therefore comparisons
+ * on these symbols except with == may result in unexpected results and
+ * are forbidden!
+ */
+#define _MIPS_ISA_MIPS1		1
+#define _MIPS_ISA_MIPS2		2
+#define _MIPS_ISA_MIPS3		3
+#define _MIPS_ISA_MIPS4		4
+#define _MIPS_ISA_MIPS5		5
+#define _MIPS_ISA_MIPS32	6
+#define _MIPS_ISA_MIPS64	7
+
+/*
+ * Subprogram calling convention
+ */
+#define _MIPS_SIM_ABI32		1
+#define _MIPS_SIM_NABI32	2
+#define _MIPS_SIM_ABI64		3
+
+#endif /* __ASM_SGIDEFS_H */
diff --git a/arch/mips/include/asm/shmbuf.h b/arch/mips/include/asm/shmbuf.h
new file mode 100644
index 0000000..f994438
--- /dev/null
+++ b/arch/mips/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 32-bit rsp. 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h
new file mode 100644
index 0000000..0929072
--- /dev/null
+++ b/arch/mips/include/asm/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA	1
+
+#define	SHMLBA 0x40000			/* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h
new file mode 100644
index 0000000..6109557
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_int.h
@@ -0,0 +1,312 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  Interrupt Mapper definitions		File: bcm1480_int.h
+    *
+    *  This module contains constants for manipulating the
+    *  BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+    *  definitions for the interrupt sources.
+    *
+    *  BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Interrupt Mapper Constants
+    ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES               128
+
+#define _BCM1480_INT_HIGH(k)   (k)
+#define _BCM1480_INT_LOW(k)    ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0                _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1                _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2                _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3                _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA              _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB              _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC              _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD              _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0               _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1               _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2               _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3               _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0               _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1               _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2               _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3               _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0                 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1                 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2                 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3                 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW               _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH              _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW               _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH              _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0              _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1              _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2              _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3              _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0              _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1              _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2              _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3              _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC               _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC               _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS                _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT              _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR             _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET             _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI               _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI               _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT              _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT               _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0                 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1                 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA                _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0                _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1                _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2                _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3                _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4                _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5                _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6                _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7                _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8                _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9                _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10               _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11               _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12               _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13               _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14               _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15               _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK(w, n)              _SB_MAKEMASK(w, ((n) & 0x3F))
+#define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE               _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS                _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT              _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT              _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA                _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0    0		/* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1    1
+#define K_BCM1480_INT_MAP_I2    2
+#define K_BCM1480_INT_MAP_I3    3
+#define K_BCM1480_INT_MAP_I4    4
+#define K_BCM1480_INT_MAP_I5    5
+#define K_BCM1480_INT_MAP_NMI   6		/* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT  7		/* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG             0
+#define M_BCM1480_INT_HT_INTMSG             _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED       0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED  1
+#define K_BCM1480_INT_HT_INTMSG_SMI         2
+#define K_BCM1480_INT_HT_INTMSG_NMI         3
+#define K_BCM1480_INT_HT_INTMSG_INIT        4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP     5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT      6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED    7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE        _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER        0
+#define V_BCM1480_INT_HT_LEVELTRIGGER       M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE           _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST       0
+#define V_BCM1480_INT_HT_LOGICALDEST        M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST            5
+#define M_BCM1480_INT_HT_INTDEST            _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x)         _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x)         _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR             13
+#define M_BCM1480_INT_HT_VECTOR             _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH  0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0       0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO    0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1       0xC0
+
+#endif /* _BCM1480_INT_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
new file mode 100644
index 0000000..fd75817
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
@@ -0,0 +1,176 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  L2 Cache constants and macros		File: bcm1480_l2c.h
+    *
+    *  This module contains constants useful for manipulating the
+    *  level 2 cache.
+    *
+    *  BCM1400 specification level:  1280-UM100-D2 (11/14/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX            5
+#define M_BCM1480_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY              17
+#define M_BCM1480_L2C_MGMT_WAY              _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY            _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID            _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG         22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE         0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY         4096
+#define BCM1480_L2C_NUM_WAYS                8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ               0
+#define M_BCM1480_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX             5
+#define M_BCM1480_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG               17
+#define M_BCM1480_L2C_TAG_TAG               _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC               40
+#define M_BCM1480_L2C_TAG_ECC               _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY               46
+#define M_BCM1480_L2C_TAG_WAY               _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY             _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID             _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC              51
+#define M_BCM1480_L2C_DATA_ECC              _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x)           _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE      0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL       8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL       _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x)    _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE      16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE   24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE   _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD      26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD      _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY      30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP      31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0      0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1      8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2      16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3      24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4      32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8      0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9      8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A      16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h
new file mode 100644
index 0000000..f26a41a
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h
@@ -0,0 +1,984 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1480 Board Support Package
+    *
+    *  Memory Controller constants              File: bcm1480_mc.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the memory controller.
+    *
+    *  BCM1400 specification level:  1280-UM100-D1 (11/14/03 Review Copy)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0                 0
+#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT         V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1                 8
+#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT         V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2                 16
+#define M_BCM1480_MC_INTLV2                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT         V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE                32
+#define M_BCM1480_MC_CS_MODE                _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT        V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT         (V_BCM1480_MC_INTLV0_DEFAULT  | \
+                                     V_BCM1480_MC_INTLV1_DEFAULT  | \
+                                     V_BCM1480_MC_INTLV2_DEFAULT  | \
+				     V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE		    0x03
+#define K_BCM1480_MC_CS02_MODE		    0x05
+#define K_BCM1480_MC_CS0123_MODE	    0x0F
+#define K_BCM1480_MC_CS0246_MODE	    0x55
+#define K_BCM1480_MC_CS0145_MODE	    0x33
+#define K_BCM1480_MC_CS0167_MODE	    0xC3
+#define K_BCM1480_MC_CSFULL_MODE	    0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START              0
+#define M_BCM1480_MC_CS0_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START              16
+#define M_BCM1480_MC_CS1_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START              32
+#define M_BCM1480_MC_CS2_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START              48
+#define M_BCM1480_MC_CS3_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END                0
+#define M_BCM1480_MC_CS0_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END                16
+#define M_BCM1480_MC_CS1_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END                32
+#define M_BCM1480_MC_CS2_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END                48
+#define M_BCM1480_MC_CS3_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00                  0
+#define M_BCM1480_MC_ROW00                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01                  8
+#define M_BCM1480_MC_ROW01                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02                  16
+#define M_BCM1480_MC_ROW02                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03                  24
+#define M_BCM1480_MC_ROW03                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04                  32
+#define M_BCM1480_MC_ROW04                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05                  40
+#define M_BCM1480_MC_ROW05                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06                  48
+#define M_BCM1480_MC_ROW06                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07                  56
+#define M_BCM1480_MC_ROW07                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08                  0
+#define M_BCM1480_MC_ROW08                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09                  8
+#define M_BCM1480_MC_ROW09                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10                  16
+#define M_BCM1480_MC_ROW10                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11                  24
+#define M_BCM1480_MC_ROW11                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12                  32
+#define M_BCM1480_MC_ROW12                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13                  40
+#define M_BCM1480_MC_ROW13                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14                  48
+#define M_BCM1480_MC_ROW14                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING  	    8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00                  0
+#define M_BCM1480_MC_COL00                  _SB_MAKEMASK(6, S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01                  8
+#define M_BCM1480_MC_COL01                  _SB_MAKEMASK(6, S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02                  16
+#define M_BCM1480_MC_COL02                  _SB_MAKEMASK(6, S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03                  24
+#define M_BCM1480_MC_COL03                  _SB_MAKEMASK(6, S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04                  32
+#define M_BCM1480_MC_COL04                  _SB_MAKEMASK(6, S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05                  40
+#define M_BCM1480_MC_COL05                  _SB_MAKEMASK(6, S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06                  48
+#define M_BCM1480_MC_COL06                  _SB_MAKEMASK(6, S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07                  56
+#define M_BCM1480_MC_COL07                  _SB_MAKEMASK(6, S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08                  0
+#define M_BCM1480_MC_COL08                  _SB_MAKEMASK(6, S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09                  8
+#define M_BCM1480_MC_COL09                  _SB_MAKEMASK(6, S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10                  16   /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11                  24
+#define M_BCM1480_MC_COL11                  _SB_MAKEMASK(6, S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12                  32
+#define M_BCM1480_MC_COL12                  _SB_MAKEMASK(6, S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13                  40
+#define M_BCM1480_MC_COL13                  _SB_MAKEMASK(6, S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14                  48
+#define M_BCM1480_MC_COL14                  _SB_MAKEMASK(6, S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING  	    8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0             0
+#define M_BCM1480_MC_CS01_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1             8
+#define M_BCM1480_MC_CS01_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2             16
+#define M_BCM1480_MC_CS01_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0             0
+#define M_BCM1480_MC_CS23_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1             8
+#define M_BCM1480_MC_CS23_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2             16
+#define M_BCM1480_MC_CS23_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING  8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND                0
+#define M_BCM1480_MC_COMMAND                _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x)             _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS           0
+#define K_BCM1480_MC_COMMAND_MRS            1
+#define K_BCM1480_MC_COMMAND_PRE            2
+#define K_BCM1480_MC_COMMAND_AR             3
+#define K_BCM1480_MC_COMMAND_SETRFSH        4
+#define K_BCM1480_MC_COMMAND_CLRRFSH        5
+#define K_BCM1480_MC_COMMAND_SETPWRDN       6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN       7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2	    8
+#define K_BCM1480_MC_COMMAND_EMRS3	    9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK    10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK   11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS           V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR             V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK   V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0		    4
+#define M_BCM1480_MC_CS0                    _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1                    _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2                    _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3                    _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4                    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5                    _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8, S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0)
+
+#define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE                  0
+#define M_BCM1480_MC_EMODE                  _SB_MAKEMASK(15, S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x)               _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT          V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE                   16
+#define M_BCM1480_MC_MODE                   _SB_MAKEMASK(15, S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x)                _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT           V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE              32
+#define M_BCM1480_MC_DRAM_TYPE              _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC        0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM        1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
+#endif
+
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2	    V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED                 _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF               _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64            _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE            _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY              40
+#define M_BCM1480_MC_PG_POLICY              _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x)           _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED       0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED       V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD		    _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS	    _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT	V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+                                V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO              0
+#define M_BCM1480_MC_CLK_RATIO              _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT      V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE               8
+#define M_BCM1480_MC_REF_RATE               _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x)            _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x)            _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz        0x31
+#define K_BCM1480_MC_REF_RATE_200MHz        0x62
+#define K_BCM1480_MC_REF_RATE_400MHz        0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT       V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS	    _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0	    _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2	    _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4	    _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6	    _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0	    _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2	    _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4	    _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6	    _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0	    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2	    _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4	    _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6	    _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0	    _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2	    _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4	    _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6	    _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0	    _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2	    _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4	    _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6	    _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0	    _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2	    _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4	    _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6	    _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0	    _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2	    _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4	    _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6	    _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0	    _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2	    _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4	    _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6	    _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0	            0
+#define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2	            8
+#define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4	            16
+#define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6	            24
+#define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ         0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE	    	8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ          8
+#define M_BCM1480_MC_ADDR_FINE_ADJ          _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT  V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ         16
+#define M_BCM1480_MC_DQI_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE	    	24
+#define M_BCM1480_MC_DQI_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ           24
+#define M_BCM1480_MC_DQI_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ         32
+#define M_BCM1480_MC_DQO_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE	    	40
+#define M_BCM1480_MC_DQO_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ           40
+#define M_BCM1480_MC_DQO_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL            44
+#define M_BCM1480_MC_DLL_PDSEL            _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x)         _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL    V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define	M_BCM1480_MC_DLL_REGBYPASS        _SB_MAKEMASK1(46)
+#define	M_BCM1480_MC_DQO_SHIFT            _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT           48
+#define M_BCM1480_MC_DLL_DEFAULT           _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x)        _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT   V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL	  54
+#define M_BCM1480_MC_DLL_REGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL  V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE	    	56
+#define M_BCM1480_MC_DLL_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE          56
+#define M_BCM1480_MC_DLL_STEP_SIZE          _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT  V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL	  60
+#define M_BCM1480_MC_DLL_BGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL  V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define	M_BCM1480_MC_DLL_BYPASS		    _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN       0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN       _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP         6
+#define M_BCM1480_MC_RTT_BYP_PULLUP         _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS             _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG       _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN    10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP      15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN    20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP      25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS             _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG       _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS              _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS             _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS             _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75              _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150             _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75             _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150            _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF               _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT            0
+#define M_DATA_ECC_INVERT           _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT             0
+#define M_BCM1480_MC_ECC_INVERT             _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register  (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD                   0
+#define M_BCM1480_MC_tRCD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT           3
+#define V_BCM1480_MC_tRCD_DEFAULT           V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL                    4
+#define M_BCM1480_MC_tCL                    _SB_MAKEMASK(4, S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT            2
+#define V_BCM1480_MC_tCL_DEFAULT            V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh                  _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR                    9
+#define M_BCM1480_MC_tWR                    _SB_MAKEMASK(3, S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT            2
+#define V_BCM1480_MC_tWR_DEFAULT            V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD                   12
+#define M_BCM1480_MC_tCwD                   _SB_MAKEMASK(4, S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT           1
+#define V_BCM1480_MC_tCwD_DEFAULT           V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP                    16
+#define M_BCM1480_MC_tRP                    _SB_MAKEMASK(4, S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT            4
+#define V_BCM1480_MC_tRP_DEFAULT            V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD                   20
+#define M_BCM1480_MC_tRRD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT           2
+#define V_BCM1480_MC_tRRD_DEFAULT           V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw                   24
+#define M_BCM1480_MC_tRCw                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT           10
+#define V_BCM1480_MC_tRCw_DEFAULT           V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr                   32
+#define M_BCM1480_MC_tRCr                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT           9
+#define V_BCM1480_MC_tRCr_DEFAULT           V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW                   40
+#define M_BCM1480_MC_tFAW                   _SB_MAKEMASK(6, S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x)                _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT           0
+#define V_BCM1480_MC_tFAW_DEFAULT           V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC                   48
+#define M_BCM1480_MC_tRFC                   _SB_MAKEMASK(7, S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT           12
+#define V_BCM1480_MC_tRFC_DEFAULT           V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO                  56
+#define M_BCM1480_MC_tFIFO                  _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x)               _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT          0
+#define V_BCM1480_MC_tFIFO_DEFAULT          V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R                  58
+#define M_BCM1480_MC_tW2R                  _SB_MAKEMASK(2, S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x)               _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT          1
+#define V_BCM1480_MC_tW2R_DEFAULT          V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W                  60
+#define M_BCM1480_MC_tR2W                  _SB_MAKEMASK(2, S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x)               _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT          0
+#define V_BCM1480_MC_tR2W_DEFAULT          V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R		    _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT         (M_BCM1480_MC_tR2R | \
+                                     V_BCM1480_MC_tFIFO_DEFAULT | \
+                                     V_BCM1480_MC_tR2W_DEFAULT | \
+                                     V_BCM1480_MC_tW2R_DEFAULT | \
+                                     V_BCM1480_MC_tRFC_DEFAULT | \
+                                     V_BCM1480_MC_tRCr_DEFAULT | \
+                                     V_BCM1480_MC_tRCw_DEFAULT | \
+                                     V_BCM1480_MC_tRRD_DEFAULT | \
+                                     V_BCM1480_MC_tRP_DEFAULT | \
+                                     V_BCM1480_MC_tCwD_DEFAULT | \
+                                     V_BCM1480_MC_tWR_DEFAULT | \
+                                     M_BCM1480_MC_tCrDh | \
+                                     V_BCM1480_MC_tCL_DEFAULT | \
+                                     V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL                   0
+#define M_BCM1480_MC_tAL                   _SB_MAKEMASK(4, S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x)                _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT           0
+#define V_BCM1480_MC_tAL_DEFAULT           V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP                   4
+#define M_BCM1480_MC_tRTP                   _SB_MAKEMASK(3, S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT           2
+#define V_BCM1480_MC_tRTP_DEFAULT           V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W                   8
+#define M_BCM1480_MC_tW2W                   _SB_MAKEMASK(2, S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x)                _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT           0
+#define V_BCM1480_MC_tW2W_DEFAULT           V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP                   12
+#define M_BCM1480_MC_tRAP                  _SB_MAKEMASK(4, S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT           0
+#define V_BCM1480_MC_tRAP_DEFAULT           V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK           8
+#define M_BCM1480_MC_BLK_SET_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK           12
+#define M_BCM1480_MC_BLK_CLR_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY           _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE                20
+#define M_BCM1480_MC_MAX_AGE                _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x)             _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE           _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ              _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN                   _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW                   33
+#define M_BCM1480_MC_SLEW                   _SB_MAKEMASK(2, S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x)                _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE           _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0                 0
+#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1                 8
+#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE             16
+#define M_BCM1480_MC_INTLV_MODE             _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x)          _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE        0x0
+#define K_BCM1480_MC_INTLV_MODE_01          0x1
+#define K_BCM1480_MC_INTLV_MODE_23          0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23       0x3
+#define K_BCM1480_MC_INTLV_MODE_0123        0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23       V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR           0
+#define M_BCM1480_MC_ECC_ERR_ADDR           _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW            _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET       _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET           _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET           _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR          0
+#define M_BCM1480_MC_ECC_CORR_ADDR          _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT            0
+#define M_BCM1480_MC_ECC_CORRECT            _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x)         _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT         0
+#define M_BCM1480_MC_CHANNEL_SELECT         _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x)      _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0       0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1       0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2       0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3       0x8
+
+#endif /* _BCM1480_MC_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h
new file mode 100644
index 0000000..b4077bb
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h
@@ -0,0 +1,902 @@
+/*  *********************************************************************
+    *  BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+    *
+    *  Register Definitions                     File: bcm1480_regs.h
+    *
+    *  This module contains the addresses of the on-chip peripherals
+    *  on the BCM1280 and BCM1480.
+    *
+    *  BCM1480 specification level:  1X55_1X80-UM100-D4 (11/24/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Pull in the BCM1250's registers since a great deal of the 1480's
+    *  functions are the same as the BCM1250.
+    ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  Register addresses are grouped by function and follow the order
+    *  of the User Manual.
+    *
+    *  For the most part, when there is more than one peripheral
+    *  of the same type on the SOC, the constants below will be
+    *  offsets from the base of each peripheral.  For example,
+    *  the MAC registers are described as offsets from the first
+    *  MAC register, and there will be a MAC_REGISTER() macro
+    *  to calculate the base address of a given MAC.
+    *
+    *  The information in this file is based on the BCM1X55/BCM1X80
+    *  User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+    *
+    *  This file is basically a "what's new" header file.  Since the
+    *  BCM1250 and the new BCM1480 (and derivatives) share many common
+    *  features, this file contains only what's new or changed from
+    *  the 1250.  (above, you can see that we include the 1250 symbols
+    *  to get the base functionality).
+    *
+    *  In software, be sure to use the correct symbols, particularly
+    *  for blocks that are different between the two chip families.
+    *  All BCM1480-specific symbols have _BCM1480_ in their names,
+    *  and all BCM1250-specific and "base" functions that are common in
+    *  both chips have no special names (this is for compatibility with
+    *  older include files).  Therefore, if you're working with the
+    *  SCD, which is very different on each chip, A_SCD_xxx implies
+    *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+    *  version.
+    ********************************************************************* */
+
+
+/*  *********************************************************************
+    * Memory Controller Registers (Section 6)
+    ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0                 0x0010050000
+#define A_BCM1480_MC_BASE_1                 0x0010051000
+#define A_BCM1480_MC_BASE_2                 0x0010052000
+#define A_BCM1480_MC_BASE_3                 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING         0x1000
+
+#define A_BCM1480_MC_BASE(ctlid)            (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid, reg)    (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG                 0x0000000100
+#define R_BCM1480_MC_CS_START               0x0000000120
+#define R_BCM1480_MC_CS_END                 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND            24
+
+#define R_BCM1480_MC_CS01_ROW0              0x0000000180
+#define R_BCM1480_MC_CS01_ROW1              0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0              0x0000000200
+#define R_BCM1480_MC_CS23_ROW1              0x0000000220
+#define R_BCM1480_MC_CS01_COL0              0x0000000280
+#define R_BCM1480_MC_CS01_COL1              0x00000002A0
+#define R_BCM1480_MC_CS23_COL0              0x0000000300
+#define R_BCM1480_MC_CS23_COL1              0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE               0x0000000180
+#define R_BCM1480_MC_CSX_ROW0               0x0000000000   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1               0x0000000020   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0               0x0000000100   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1               0x0000000120   /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING              0x0000000080   /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA                0x0000000380
+#define R_BCM1480_MC_CS23_BA                0x00000003A0
+#define R_BCM1480_MC_DRAMCMD                0x0000000400
+#define R_BCM1480_MC_DRAMMODE               0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG              0x0000000440
+#define R_BCM1480_MC_MCLK_CFG               R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA              0x0000000480
+#define R_BCM1480_MC_TEST_ECC               0x00000004A0
+#define R_BCM1480_MC_TIMING1                0x00000004C0
+#define R_BCM1480_MC_TIMING2                0x00000004E0
+#define R_BCM1480_MC_DLL_CFG                0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG              0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT		    0x0000000460
+#define R_BCM1480_MC_ECC_STATUS		    0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG             0x0010054100
+#define A_BCM1480_MC_GLB_INTLV              0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS         0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR           0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT        0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL   0x00100541A0
+
+/*  *********************************************************************
+    * L2 Cache Control Registers (Section 5)
+    ********************************************************************* */
+
+#define A_BCM1480_L2_BASE                   0x0010040000
+
+#define A_BCM1480_L2_READ_TAG               0x0010040018
+#define A_BCM1480_L2_ECC_TAG                0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE            0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE            0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE            0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG            0x0010040040	/* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE          0x0010040060	/* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x)    (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0         0x0010040080	/* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4         0x00100400A0	/* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0          0x0010040100	/* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4          0x0010040120	/* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0         0x0010040140	/* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4         0x0010040160	/* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0          0x00100400C0	/* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4          0x00100400E0	/* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks)   (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE              0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b)        (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE          0x00D0000000
+
+
+/*  *********************************************************************
+    * PCI-X Interface Registers (Section 7)
+    ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE                  0x0010061400
+
+#define A_BCM1480_PCI_RESET                 0x0010061400
+#define A_BCM1480_PCI_DLL                   0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER         0x002E000000
+
+/*  *********************************************************************
+    * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+    ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2        0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2                A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3        0x0010067000
+#define A_MAC_BASE_3                A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST        0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST        R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/*  *********************************************************************
+    * DUART Registers (Section 14)
+    ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/*  Conventions, per user manual:
+ *     DUART    generic, channels A,B,C,D
+ *     DUART0   implementing channels A,B
+ *     DUART1   inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS           4
+
+#define A_BCM1480_DUART0                    0x0010060000
+#define A_BCM1480_DUART1                    0x0010060400
+#define A_BCM1480_DUART(chan)               ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING       0x100
+#define A_BCM1480_DUART_CHANREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
+#define A_BCM1480_DUART_CTRLREG(chan, reg)				\
+	(A_BCM1480_DUART(chan) +					\
+	 BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
+
+#define DUART_IMRISR_SPACING	    0x20
+#define DUART_INCHNG_SPACING	    0x10
+
+#define R_BCM1480_DUART_IMRREG(chan)					\
+	(R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan)					\
+	(R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_INCHREG(chan)					\
+	(R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
+#define A_BCM1480_DUART_ISRREG(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
+
+#define A_BCM1480_DUART_IN_PORT(chan)					\
+	(A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C        0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C        0x0010060410
+#define A_BCM1480_DUART_STATUS_C            0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C           0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C          0x0010060440
+#define A_BCM1480_DUART_CMD_C               0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C           0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C           0x0010060470
+#define A_BCM1480_DUART_OPCR_C              0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C          0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D        0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D        0x0010060510
+#define A_BCM1480_DUART_STATUS_D            0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D           0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D          0x0010060540
+#define A_BCM1480_DUART_CMD_D               0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D           0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D           0x0010060570
+#define A_BCM1480_DUART_OPCR_D              0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D          0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD      0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD         0x0010060610
+#define A_BCM1480_DUART_ISR_C               0x0010060620
+#define A_BCM1480_DUART_IMR_C               0x0010060630
+#define A_BCM1480_DUART_ISR_D               0x0010060640
+#define A_BCM1480_DUART_IMR_D               0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD         0x0010060660
+#define A_BCM1480_DUART_OPCR_CD             0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD          0x0010060680
+#define A_BCM1480_DUART_ISR_CD              0x0010060690
+#define A_BCM1480_DUART_IMR_CD              0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD          0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD        0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C       0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D       0x00100606E0
+
+
+/*  *********************************************************************
+    * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+    ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B	0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B	0x0010061A68
+
+/*  *********************************************************************
+    * GPIO Registers (Section 17)
+    ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE         0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE         (-8)
+
+#define A_GPIO_INT_ADD_TYPE	A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE	R_BCM1480_GPIO_INT_ADD_TYPE
+
+/*  *********************************************************************
+    * SMBus Registers (Section 18)
+    ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/*  *********************************************************************
+    * Timer Registers (Sections 4.6)
+    ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2                0x0010022050
+#define A_BCM1480_SCD_WDOG_3                0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS               4
+
+#define A_BCM1480_SCD_WDOG_BASE(w)       (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2       0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2        0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2        0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3       0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3        0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3        0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT		A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE       0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0           A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1           A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2           0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3           0x0010020C18
+
+/*  *********************************************************************
+    * System Control Registers (Section 4.2)
+    ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH	 	0x100200A0
+
+/*  *********************************************************************
+    * System Address Trap Registers (Section 4.9)
+    ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/*  *********************************************************************
+    * System Interrupt Mapper Registers (Sections 4.3-4.5)
+    ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE             0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE             0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE             0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE             0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING        0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT  13
+
+#define A_BCM1480_IMR_MAPPER(cpu)       (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+   64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING                  0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H          0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H           0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H       0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H          0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H         0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET         0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU             0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU         0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU         0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU             0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU         0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU         0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H   0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT      8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H      0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT         64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L          0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L           0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L       0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L          0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L         0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L   0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L      0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE   0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE   0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE   0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE   0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING       0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu)     (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+                                        (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU         0x00
+#define R_BCM1480_IMR_MAILBOX_SET         0x08
+#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \
+    (A_BCM1480_IMR_CPU0_BASE + \
+     (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+     (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+     (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
+/*  *********************************************************************
+    * System Performance Counter Registers (Section 4.7)
+    ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+   registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE         0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0         0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0        A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1         0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1        A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0            A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1            A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2            A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3            A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4            0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5            0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
+
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
+/*  *********************************************************************
+    * System Bus Watcher Registers (Section 4.8)
+    ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG      0x00100208D8
+
+/*  *********************************************************************
+    * System Debug Controller Registers (Section 19)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+/*  *********************************************************************
+    * System Trace Unit Registers (Sections 4.10)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+/*  *********************************************************************
+    * Data Mover DMA Registers (Section 10.7)
+    ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/*  *********************************************************************
+    * HyperTransport Interface Registers (Section 8)
+    ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS		   3
+#define BCM1480_HT_PORT_SPACING		   0x800
+#define A_BCM1480_HT_PORT_HEADER(x)	   (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER          0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER          0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER          0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER         0x00FE002000
+
+
+/*  *********************************************************************
+    * Node Controller Registers (Section 9)
+    ********************************************************************* */
+
+#define A_BCM1480_NC_BASE                   0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD              0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER            0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR          0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR          0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS         0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE         0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR        0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS       0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE       0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER        0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL    0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0     0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1     0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2     0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3     0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4     0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5     0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6     0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7     0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8     0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9     0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10    0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11    0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12    0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER     0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/*  *********************************************************************
+    * H&R Block Configuration Registers (Section 12.4)
+    ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0                 0x00DF820000
+#define A_BCM1480_HR_BASE_1                 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2                 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING         0x80000
+
+#define A_BCM1480_HR_BASE(idx)              (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx, reg)      (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG                    0x0000000000
+
+#define R_BCM1480_HR_MAPPING		    0x0000010010
+
+#define BCM1480_HR_RULE_SPACING             0x0000000010
+#define BCM1480_HR_NUM_RULES                16
+#define BCM1480_HR_OP_OFFSET                0x0000000100
+#define BCM1480_HR_TYPE_OFFSET              0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx)           (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx)         (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING             0x0000000010
+#define BCM1480_HR_NUM_LEAVES               10
+#define BCM1480_HR_LEAF_OFFSET              0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx)          (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0               0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING             0x0000000010
+#define BCM1480_HR_NUM_PATHS                16
+#define BCM1480_HR_PATH_OFFSET              0x0000000600
+#define R_BCM1480_HR_PATH(idx)              (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT           0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING            8
+#define BCM1480_HR_NUM_ROUTES               512
+#define BCM1480_HR_ROUTE_OFFSET             0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx)           (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/*  *********************************************************************
+    * Packet Manager DMA Registers (Section 12.5)
+    ********************************************************************* */
+
+#define A_BCM1480_PM_BASE                   0x0010056000
+
+#define A_BCM1480_PMI_LCL_0                 0x0010058000
+#define A_BCM1480_PMO_LCL_0                 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0              (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0              (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING     0x100
+#define BCM1480_PM_NUM_CHANNELS             32
+
+#define A_BCM1480_PMI_LCL_BASE(idx)             (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx, reg)     (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx)             (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx, reg)     (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING              8
+#define BCM1480_PM_INT_FUNCTION_SPACING     0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS        3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE              0x0000000000
+#define R_BCM1480_PM_CNT                    0x0000000008
+#define R_BCM1480_PM_PFCNT                  0x0000000010
+#define R_BCM1480_PM_LAST                   0x0000000018
+#define R_BCM1480_PM_PFINDX                 0x0000000020
+#define R_BCM1480_PM_INT_WMK                0x0000000028
+#define R_BCM1480_PM_CONFIG0                0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG             0x0000000078
+#define R_BCM1480_PM_CACHEABILITY           0x0000000080   /* PMI only */
+#define R_BCM1480_PM_INT_CNFG               0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER       0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB         0x00000000F8   /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB         0x00000000F8   /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0                 0x0010056000
+#define A_BCM1480_PMO_GLB_0                 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING            0x00000008C8   /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING	(A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0                 0x0010056800
+#define A_BCM1480_PMI_INT(q)                (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0          (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0                 0x0010057800
+#define A_BCM1480_PMO_INT(q)                (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0          (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST                 0x0000000000
+#define R_BCM1480_PM_INT_MSK                0x0000000040
+#define R_BCM1480_PM_INT_CLR                0x0000000080
+#define R_BCM1480_PM_MRGD_INT               0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI    0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID        0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB        0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO    0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD        0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB        0x0010057FF8
+
+/*  *********************************************************************
+    *  Switch performance counters
+    ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG	0xdfb91800
+#define A_BCM1480_SWPERF_CNT0	0xdfb91880
+#define A_BCM1480_SWPERF_CNT1	0xdfb91888
+#define A_BCM1480_SWPERF_CNT2	0xdfb91890
+#define A_BCM1480_SWPERF_CNT3	0xdfb91898
+
+
+/*  *********************************************************************
+    *  Switch Trace Unit
+    ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0		0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0	0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0	0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0	0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0	0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0			0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0		0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG			0xDFB91500
+#define A_BCM1480_SWTRC_READ			0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP		0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/*  *********************************************************************
+    *  High-Speed Port Registers (Section 13)
+    ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0                0x00DF810000
+#define A_BCM1480_HSP_BASE_1                0x00DF890000
+#define A_BCM1480_HSP_BASE_2                0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING        0x80000
+
+#define A_BCM1480_HSP_BASE(idx)             (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx, reg)     (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0           0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1           0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN     0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0      0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1      0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG             0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION          0x0000000808
+#define R_BCM1480_HSP_RX_TEST                 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS         0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0           0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1           0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD           0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL          0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER   0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0       0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1       0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2       0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3       0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4       0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5       0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6       0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7       0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled.  Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0      0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1      0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2      0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3      0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4      0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5      0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0      0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1      0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2      0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3      0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4      0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5      0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6      0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7      0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx)   (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0           0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1           0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2           0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL          0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW       0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL           0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW        0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0           0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1           0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT    0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0       0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1       0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2       0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3       0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4       0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5       0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6       0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7       0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC         0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC         0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC          0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0      0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1      0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2      0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0      0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1      0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2      0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3      0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT       0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT       0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0      0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1      0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2      0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3      0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT       0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT       0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0      0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1      0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG             0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION          0x0000040808
+#define R_BCM1480_HSP_TX_TEST                 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0           0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1           0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2           0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL          0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW       0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL           0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW        0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN     0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x)  (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/*  *********************************************************************
+    *  Physical Address Map (Table 10 and Figure 7)
+    ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS                   _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END               _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES     _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES     _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES       _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES      _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES     _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES      _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES       _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS        _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS      _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS      _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS        _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS       _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS      _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS       _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES   _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES        _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES       _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS                _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS    _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS         _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS        _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER                _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES     _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS      _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS            _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS            _SB_MAKE64(0xF000000000)
+
+
+/*  *********************************************************************
+    *  L2 Cache as RAM (Table 54)
+    ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS           8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4             _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5             _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6             _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7             _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h
new file mode 100644
index 0000000..25ef24c
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h
@@ -0,0 +1,406 @@
+/*  *********************************************************************
+    *  BCM1280/BCM1400 Board Support Package
+    *
+    *  SCD Constants and Macros                     File: bcm1480_scd.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the System Control and Debug module.
+    *
+    *  BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003,2004,2005
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Pull in the BCM1250's SCD since lots of stuff is the same.
+    ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  This file is basically a "what's new" header file.  Since the
+    *  BCM1250 and the new BCM1480 (and derivatives) share many common
+    *  features, this file contains only what's new or changed from
+    *  the 1250.  (above, you can see that we include the 1250 symbols
+    *  to get the base functionality).
+    *
+    *  In software, be sure to use the correct symbols, particularly
+    *  for blocks that are different between the two chip families.
+    *  All BCM1480-specific symbols have _BCM1480_ in their names,
+    *  and all BCM1250-specific and "base" functions that are common in
+    *  both chips have no special names (this is for compatibility with
+    *  older include files).  Therefore, if you're working with the
+    *  SCD, which is very different on each chip, A_SCD_xxx implies
+    *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+    *  version.
+    ********************************************************************* */
+
+/*  *********************************************************************
+    *  System control/debug registers
+    ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480          0x1406
+#define K_SYS_PART_BCM1280          0x1206
+#define K_SYS_PART_BCM1455          0x1407
+#define K_SYS_PART_BCM1255          0x1257
+#define K_SYS_PART_BCM1158          0x1156
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0             _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT          _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2             _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3             _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4             _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV               _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV               _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV               _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV                _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV                _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x)             _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE         _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE             _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32       0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8        1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS       _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST              _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER           _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25            _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG                26
+#define M_BCM1480_SYS_CONFIG                _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x)             _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32            _SB_MAKEMASK(32, 15)
+
+#define S_BCM1480_SYS_NODEID                47
+#define M_BCM1480_SYS_NODEID                _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x)             _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN             _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0           _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1           _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2           _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3           _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0           56
+#define M_BCM1480_SYS_DISABLECPU0           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1           57
+#define M_BCM1480_SYS_DISABLECPU1           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2           58
+#define M_BCM1480_SYS_DISABLECPU2           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3           59
+#define M_BCM1480_SYS_DISABLECPU3           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES            _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET             _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET          _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG               _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE           _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE       2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT       1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0       3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1       5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2       9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3       17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * SPC_CFG_SRC[0-3] is the same as the 1250.
+ * SPC_CFG_SRC[4-7] only exist on the 1480
+ * The clear/enable bits are in different locations on the 1250 and 1480.
+ */
+
+#define S_SPC_CFG_SRC4              32
+#define M_SPC_CFG_SRC4              _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
+#define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
+#define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
+
+#define S_SPC_CFG_SRC5              40
+#define M_SPC_CFG_SRC5              _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
+#define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
+#define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
+
+#define S_SPC_CFG_SRC6              48
+#define M_SPC_CFG_SRC6              _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
+#define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
+#define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
+
+#define S_SPC_CFG_SRC7              56
+#define M_SPC_CFG_SRC7              _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
+#define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
+#define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+#define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
+#define M_SPC_CFG_ENABLE		M_BCM1480_SPC_CFG_ENABLE
+#endif
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT             0
+#define M_BCM1480_SPC_CNT_COUNT             _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x)          _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x)          _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW             _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost.  The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
+#define M_BCM1480_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
+
+#define S_BCM1480_ATRAP_CFG_CNT            0
+#define M_BCM1480_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID     8
+#define M_BCM1480_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0            0
+#define K_BCM1480_BUS_AGENT_CPU1            1
+#define K_BCM1480_BUS_AGENT_NC              2
+#define K_BCM1480_BUS_AGENT_IOB             3
+#define K_BCM1480_BUS_AGENT_SCD             4
+#define K_BCM1480_BUS_AGENT_L2C             6
+#define K_BCM1480_BUS_AGENT_MC              7
+#define K_BCM1480_BUS_AGENT_CPU2            8
+#define K_BCM1480_BUS_AGENT_CPU3            9
+#define K_BCM1480_BUS_AGENT_PM              10
+
+#define S_BCM1480_ATRAP_CFG_CATTR           12
+#define M_BCM1480_ATRAP_CFG_CATTR           _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x)        _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x)        _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC       1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV        _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC          26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC          _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * BCM1480 changes to this register (other than location of the CUR_ADDR field)
+ * are defined below.
+ */
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE        16
+#define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS	0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT	1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2
+
+#endif /* _BCM1480_SCD_H */
diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h
new file mode 100644
index 0000000..ebefe79
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bigsur.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
+#define K_GPIO_GB_IDE   4
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
new file mode 100644
index 0000000..25372ae
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _SIBYTE_BOARD_H
+#define _SIBYTE_BOARD_H
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
+    defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+#include <asm/sibyte/swarm.h>
+#endif
+
+#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE)
+#include <asm/sibyte/sentosa.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_CARMEL
+#include <asm/sibyte/carmel.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef LEDS_PHYS
+#define setleds(t0, t1, c0, c1, c2, c3) \
+	li	t0, (LEDS_PHYS|0xa0000000); \
+	li	t1, c0; \
+	sb	t1, 0x18(t0); \
+	li	t1, c1; \
+	sb	t1, 0x10(t0); \
+	li	t1, c2; \
+	sb	t1, 0x08(t0); \
+	li	t1, c3; \
+	sb	t1, 0x00(t0)
+#else
+#define setleds(t0, t1, c0, c1, c2, c3)
+#endif /* LEDS_PHYS */
+
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SIBYTE_BOARD_H */
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
new file mode 100644
index 0000000..11cad71
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/carmel.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_CARMEL_H
+#define __ASM_SIBYTE_CARMEL_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#define SIBYTE_BOARD_NAME "Carmel"
+
+#define GPIO_PHY_INTERRUPT      2
+#define GPIO_NONMASKABLE_INT    3
+#define GPIO_CF_INSERTED        6
+#define GPIO_MONTEREY_RESET     7
+#define GPIO_QUADUART_INT       8
+#define GPIO_CF_INT             9
+#define GPIO_FPGA_CCLK          10
+#define GPIO_FPGA_DOUT          11
+#define GPIO_FPGA_DIN           12
+#define GPIO_FPGA_PGM           13
+#define GPIO_FPGA_DONE          14
+#define GPIO_FPGA_INIT          15
+
+#define LEDS_CS                 2
+#define LEDS_PHYS               0x100C0000
+#define MLEDS_CS                3
+#define MLEDS_PHYS              0x100A0000
+#define UART_CS                 4
+#define UART_PHYS               0x100D0000
+#define ARAVALI_CS              5
+#define ARAVALI_PHYS            0x11000000
+#define IDE_CS                  6
+#define IDE_PHYS                0x100B0000
+#define ARAVALI2_CS             7
+#define ARAVALI2_PHYS           0x100E0000
+
+#if defined(CONFIG_SIBYTE_CARMEL)
+#define K_GPIO_GB_IDE   9
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+
+#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h
new file mode 100644
index 0000000..80c1a05
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ASM_SIBYTE_SB1250_H
+#define _ASM_SIBYTE_SB1250_H
+
+/*
+ * yymmddpp: year, month, day, patch.
+ * should sync with Makefile EXTRAVERSION
+ */
+#define SIBYTE_RELEASE 0x02111403
+
+#define SB1250_NR_IRQS 64
+
+#define BCM1480_NR_IRQS                 128
+#define BCM1480_NR_IRQS_HALF            64
+
+#define SB1250_DUART_MINOR_BASE		64
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+/* For revision/pass information */
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
+extern unsigned int sb1_pass;
+extern unsigned int soc_pass;
+extern unsigned int soc_type;
+extern unsigned int periph_rev;
+extern unsigned int zbbus_mhz;
+
+extern void sb1250_time_init(void);
+extern void sb1250_mask_irq(int cpu, int irq);
+extern void sb1250_unmask_irq(int cpu, int irq);
+
+extern void bcm1480_time_init(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+
+#define AT_spin \
+	__asm__ __volatile__ (		\
+		".set noat\n"		\
+		"li $at, 0\n"		\
+		"1: beqz $at, 1b\n"	\
+		".set at\n"		\
+		)
+
+#endif
+
+#define IOADDR(a) ((void __iomem *)(IO_BASE + (a)))
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h
new file mode 100644
index 0000000..09365f9
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_defs.h
@@ -0,0 +1,259 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Global constants and macros		File: sb1250_defs.h
+    *
+    *  This file contains macros and definitions used by the other
+    *  include files.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_DEFS_H
+#define _SB1250_DEFS_H
+
+/*
+ * These headers require ANSI C89 string concatenation, and GCC or other
+ * 'long long' (64-bit integer) support.
+ */
+#if !defined(__STDC__) && !defined(_MSC_VER)
+#error SiByte headers require ANSI C89 support
+#endif
+
+
+/*  *********************************************************************
+    *  Macros for feature tests, used to enable include file features
+    *  for chip features only present in certain chip revisions.
+    *
+    *  SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision
+    *  which is to be exposed by the headers.  If undefined, it defaults to
+    *  "all features."
+    *
+    *  Use like:
+    *
+    *    #define SIBYTE_HDR_FEATURES	SIBYTE_HDR_FMASK_112x_PASS1
+    *
+    *		Generate defines only for that revision of chip.
+    *
+    *    #if SIBYTE_HDR_FEATURE(chip,pass)
+    *
+    *		True if header features for that revision or later of
+    *	        that particular chip type are enabled in SIBYTE_HDR_FEATURES.
+    *	        (Use this to bracket #defines for features present in a given
+    *		revision and later.)
+    *
+    *		Note that there is no implied ordering between chip types.
+    *
+    *		Note also that 'chip' and 'pass' must textually exactly
+    *		match the defines below.  So, for example,
+    *		SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but
+    *		SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons).
+    *
+    *    #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but true for the named revision
+    *		and earlier revisions of the named chip type.
+    *
+    *    #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
+    *
+    *		Same as SIBYTE_HDR_FEATURE, but only true for the named
+    *		revision of the named chip type.  (Note that this CANNOT
+    *		be used to verify that you're compiling only for that
+    *		particular chip/revision.  It will be true any time this
+    *		chip/revision is included in SIBYTE_HDR_FEATURES.)
+    *
+    *    #if SIBYTE_HDR_FEATURE_CHIP(chip)
+    *
+    *		True if header features for (any revision of) that chip type
+    *		are enabled in SIBYTE_HDR_FEATURES.  (Use this to bracket
+    *		#defines for features specific to a given chip type.)
+    *
+    *  Mask values currently include room for additional revisions of each
+    *  chip type, but can be renumbered at will.  Note that they MUST fit
+    *  into 31 bits and may not include C type constructs, for safe use in
+    *  CPP conditionals.  Bit positions within chip types DO indicate
+    *  ordering, so be careful when adding support for new minor revs.
+    ********************************************************************* */
+
+#define	SIBYTE_HDR_FMASK_1250_ALL		0x000000ff
+#define	SIBYTE_HDR_FMASK_1250_PASS1		0x00000001
+#define	SIBYTE_HDR_FMASK_1250_PASS2		0x00000002
+#define	SIBYTE_HDR_FMASK_1250_PASS3		0x00000004
+
+#define	SIBYTE_HDR_FMASK_112x_ALL		0x00000f00
+#define	SIBYTE_HDR_FMASK_112x_PASS1		0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL		0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1		0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2		0x00002000
+
+/* Bit mask for chip/revision.  (use _ALL for all revisions of a chip).  */
+#define	SIBYTE_HDR_FMASK(chip, pass)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
+#define	SIBYTE_HDR_FMASK_ALLREVS(chip)					\
+    (SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+
+/* Default constant value for all chips, all revisions */
+#define	SIBYTE_HDR_FMASK_ALL						\
+    (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL		\
+     | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips.  We use this
+   to weed out constants and macros that do not exist on later chips like
+   the BCM1480  */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL					\
+    (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
+
+#ifndef SIBYTE_HDR_FEATURES
+#define	SIBYTE_HDR_FEATURES			SIBYTE_HDR_FMASK_ALL
+#endif
+
+
+/* Bit mask for revisions of chip exclusively before the named revision.  */
+#define	SIBYTE_HDR_FMASK_BEFORE(chip, pass)				\
+    ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+/* Bit mask for revisions of chip exclusively after the named revision.  */
+#define	SIBYTE_HDR_FMASK_AFTER(chip, pass)				\
+    (~(SIBYTE_HDR_FMASK(chip, pass)					\
+     | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+
+/* True if header features enabled for (any revision of) that chip type.  */
+#define SIBYTE_HDR_FEATURE_CHIP(chip)					\
+    (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+   anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+      (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/*    (!!  (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
+/* True if header features enabled for that rev or later, inclusive.  */
+#define SIBYTE_HDR_FEATURE(chip, pass)					\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	  | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for exactly that rev.  */
+#define SIBYTE_HDR_FEATURE_EXACT(chip, pass)				\
+    (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for that rev or before, inclusive.  */
+#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass)				\
+    (!! ((SIBYTE_HDR_FMASK(chip, pass)					\
+	 | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+
+/*  *********************************************************************
+    *  Naming schemes for constants in these files:
+    *
+    *  M_xxx           MASK constant (identifies bits in a register).
+    *                  For multi-bit fields, all bits in the field will
+    *                  be set.
+    *
+    *  K_xxx           "Code" constant (value for data in a multi-bit
+    *                  field).  The value is right justified.
+    *
+    *  V_xxx           "Value" constant.  This is the same as the
+    *                  corresponding "K_xxx" constant, except it is
+    *                  shifted to the correct position in the register.
+    *
+    *  S_xxx           SHIFT constant.  This is the number of bits that
+    *                  a field value (code) needs to be shifted
+    *                  (towards the left) to put the value in the right
+    *                  position for the register.
+    *
+    *  A_xxx           ADDRESS constant.  This will be a physical
+    *                  address.  Use the PHYS_TO_K1 macro to generate
+    *                  a K1SEG address.
+    *
+    *  R_xxx           RELATIVE offset constant.  This is an offset from
+    *                  an A_xxx constant (usually the first register in
+    *                  a group).
+    *
+    *  G_xxx(X)        GET value.  This macro obtains a multi-bit field
+    *                  from a register, masks it, and shifts it to
+    *                  the bottom of the register (retrieving a K_xxx
+    *                  value, for example).
+    *
+    *  V_xxx(X)        VALUE.  This macro computes the value of a
+    *                  K_xxx constant shifted to the correct position
+    *                  in the register.
+    ********************************************************************* */
+
+
+
+
+/*
+ * Cast to 64-bit number.  Presumably the syntax is different in
+ * assembly language.
+ *
+ * Note: you'll need to define uint32_t and uint64_t in your headers.
+ */
+
+#if !defined(__ASSEMBLY__)
+#define _SB_MAKE64(x) ((uint64_t)(x))
+#define _SB_MAKE32(x) ((uint32_t)(x))
+#else
+#define _SB_MAKE64(x) (x)
+#define _SB_MAKE32(x) (x)
+#endif
+
+
+/*
+ * Make a mask for 1 bit at position 'n'
+ */
+
+#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n))
+
+/*
+ * Make a mask for 'v' bits at position 'n'
+ */
+
+#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n))
+
+/*
+ * Make a value at 'v' at bit position 'n'
+ */
+
+#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n))
+#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n))
+
+#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n))
+#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n))
+
+/*
+ * Macros to read/write on-chip registers
+ * XXX should we do the PHYS_TO_K1 here?
+ */
+
+
+#if defined(__mips64) && !defined(__ASSEMBLY__)
+#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
+#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h
new file mode 100644
index 0000000..bad5617
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_dma.h
@@ -0,0 +1,594 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  DMA definitions				File: sb1250_dma.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the SB1250's DMA controllers, both the data mover
+    *  and the Ethernet DMA.
+    *
+    *  SB1250 specification level:  User's manual 10/21/02
+    *  BCM1280 specification level: User's manual 11/24/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_DMA_H
+#define _SB1250_DMA_H
+
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  DMA Registers
+    ********************************************************************* */
+
+/*
+ * Ethernet and Serial DMA Configuration Register 0  (Table 7-4)
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG0_MAC_x_TX_CH_0
+ * Registers: DMA_CONFIG0_SER_x_RX
+ * Registers: DMA_CONFIG0_SER_x_TX
+ */
+
+
+#define M_DMA_DROP                  _SB_MAKEMASK1(0)
+
+#define M_DMA_CHAIN_SEL             _SB_MAKEMASK1(1)
+#define M_DMA_RESERVED1             _SB_MAKEMASK1(2)
+
+#define S_DMA_DESC_TYPE		    _SB_MAKE64(1)
+#define M_DMA_DESC_TYPE		    _SB_MAKEMASK(2, S_DMA_DESC_TYPE)
+#define V_DMA_DESC_TYPE(x)          _SB_MAKEVALUE(x, S_DMA_DESC_TYPE)
+#define G_DMA_DESC_TYPE(x)          _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE)
+
+#define K_DMA_DESC_TYPE_RING_AL		0
+#define K_DMA_DESC_TYPE_CHAIN_AL	1
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_DMA_DESC_TYPE_RING_UAL_WI	2
+#define K_DMA_DESC_TYPE_RING_UAL_RMW	3
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_EOP_INT_EN            _SB_MAKEMASK1(3)
+#define M_DMA_HWM_INT_EN            _SB_MAKEMASK1(4)
+#define M_DMA_LWM_INT_EN            _SB_MAKEMASK1(5)
+#define M_DMA_TBX_EN                _SB_MAKEMASK1(6)
+#define M_DMA_TDX_EN                _SB_MAKEMASK1(7)
+
+#define S_DMA_INT_PKTCNT            _SB_MAKE64(8)
+#define M_DMA_INT_PKTCNT            _SB_MAKEMASK(8, S_DMA_INT_PKTCNT)
+#define V_DMA_INT_PKTCNT(x)         _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT)
+#define G_DMA_INT_PKTCNT(x)         _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT)
+
+#define S_DMA_RINGSZ                _SB_MAKE64(16)
+#define M_DMA_RINGSZ                _SB_MAKEMASK(16, S_DMA_RINGSZ)
+#define V_DMA_RINGSZ(x)             _SB_MAKEVALUE(x, S_DMA_RINGSZ)
+#define G_DMA_RINGSZ(x)             _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ)
+
+#define S_DMA_HIGH_WATERMARK        _SB_MAKE64(32)
+#define M_DMA_HIGH_WATERMARK        _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK)
+#define V_DMA_HIGH_WATERMARK(x)     _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK)
+#define G_DMA_HIGH_WATERMARK(x)     _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK)
+
+#define S_DMA_LOW_WATERMARK         _SB_MAKE64(48)
+#define M_DMA_LOW_WATERMARK         _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK)
+#define V_DMA_LOW_WATERMARK(x)      _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK)
+#define G_DMA_LOW_WATERMARK(x)      _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK)
+
+/*
+ * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG1_DMA_x_TX_CH_0
+ * Registers: DMA_CONFIG1_SER_x_RX
+ * Registers: DMA_CONFIG1_SER_x_TX
+ */
+
+#define M_DMA_HDR_CF_EN             _SB_MAKEMASK1(0)
+#define M_DMA_ASIC_XFR_EN           _SB_MAKEMASK1(1)
+#define M_DMA_PRE_ADDR_EN           _SB_MAKEMASK1(2)
+#define M_DMA_FLOW_CTL_EN           _SB_MAKEMASK1(3)
+#define M_DMA_NO_DSCR_UPDT          _SB_MAKEMASK1(4)
+#define M_DMA_L2CA		    _SB_MAKEMASK1(5)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_RX_XTRA_STATUS	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_CPU_PAUSE	    _SB_MAKEMASK1(6)
+#define M_DMA_TX_FC_PAUSE_EN	    _SB_MAKEMASK1(7)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_MBZ1                  _SB_MAKEMASK(6, 15)
+
+#define S_DMA_HDR_SIZE              _SB_MAKE64(21)
+#define M_DMA_HDR_SIZE              _SB_MAKEMASK(9, S_DMA_HDR_SIZE)
+#define V_DMA_HDR_SIZE(x)           _SB_MAKEVALUE(x, S_DMA_HDR_SIZE)
+#define G_DMA_HDR_SIZE(x)           _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE)
+
+#define M_DMA_MBZ2                  _SB_MAKEMASK(5, 32)
+
+#define S_DMA_ASICXFR_SIZE          _SB_MAKE64(37)
+#define M_DMA_ASICXFR_SIZE          _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE)
+#define V_DMA_ASICXFR_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE)
+#define G_DMA_ASICXFR_SIZE(x)       _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE)
+
+#define S_DMA_INT_TIMEOUT           _SB_MAKE64(48)
+#define M_DMA_INT_TIMEOUT           _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT)
+#define V_DMA_INT_TIMEOUT(x)        _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT)
+#define G_DMA_INT_TIMEOUT(x)        _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT)
+
+/*
+ * Ethernet and Serial DMA Descriptor base address (Table 7-6)
+ */
+
+#define M_DMA_DSCRBASE_MBZ          _SB_MAKEMASK(4, 0)
+
+
+/*
+ * ASIC Mode Base Address (Table 7-7)
+ */
+
+#define M_DMA_ASIC_BASE_MBZ         _SB_MAKEMASK(20, 0)
+
+/*
+ * DMA Descriptor Count Registers (Table 7-8)
+ */
+
+/* No bitfields */
+
+
+/*
+ * Current Descriptor Address Register (Table 7-11)
+ */
+
+#define S_DMA_CURDSCR_ADDR          _SB_MAKE64(0)
+#define M_DMA_CURDSCR_ADDR          _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR)
+#define S_DMA_CURDSCR_COUNT         _SB_MAKE64(40)
+#define M_DMA_CURDSCR_COUNT         _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_TX_CH_PAUSE_ON	    _SB_MAKEMASK1(56)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * Receive Packet Drop Registers
+ */
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_OODLOST_RX           _SB_MAKE64(0)
+#define M_DMA_OODLOST_RX           _SB_MAKEMASK(16, S_DMA_OODLOST_RX)
+#define G_DMA_OODLOST_RX(x)        _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX)
+
+#define S_DMA_EOP_COUNT_RX         _SB_MAKE64(16)
+#define M_DMA_EOP_COUNT_RX         _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX)
+#define G_DMA_EOP_COUNT_RX(x)      _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*  *********************************************************************
+    *  DMA Descriptors
+    ********************************************************************* */
+
+/*
+ * Descriptor doubleword "A"  (Table 7-12)
+ */
+
+#define S_DMA_DSCRA_OFFSET          _SB_MAKE64(0)
+#define M_DMA_DSCRA_OFFSET          _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET)
+#define V_DMA_DSCRA_OFFSET(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET)
+#define G_DMA_DSCRA_OFFSET(x)       _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRA_A_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRA_A_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR)
+
+#define M_DMA_DSCRA_A_ADDR_OFFSET   (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_A_ADDR_UA        _SB_MAKE64(0)
+#define M_DMA_DSCRA_A_ADDR_UA        _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRA_A_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRA_A_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE)
+#define V_DMA_DSCRA_A_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE)
+#define G_DMA_DSCRA_A_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_DSCR_CNT	    _SB_MAKE64(40)
+#define M_DMA_DSCRA_DSCR_CNT	    _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT)
+#define G_DMA_DSCRA_DSCR_CNT(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_DSCRA_INTERRUPT       _SB_MAKEMASK1(49)
+#define M_DMA_DSCRA_OFFSETB	    _SB_MAKEMASK1(50)
+
+#define S_DMA_DSCRA_STATUS          _SB_MAKE64(51)
+#define M_DMA_DSCRA_STATUS          _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS)
+#define V_DMA_DSCRA_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS)
+#define G_DMA_DSCRA_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS)
+
+/*
+ * Descriptor doubleword "B"  (Table 7-13)
+ */
+
+
+#define S_DMA_DSCRB_OPTIONS         _SB_MAKE64(0)
+#define M_DMA_DSCRB_OPTIONS         _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS)
+#define V_DMA_DSCRB_OPTIONS(x)      _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS)
+#define G_DMA_DSCRB_OPTIONS(x)      _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_A_SIZE        _SB_MAKE64(8)
+#define M_DMA_DSCRB_A_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE)
+#define V_DMA_DSCRB_A_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE)
+#define G_DMA_DSCRB_A_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define R_DMA_DSCRB_ADDR            _SB_MAKE64(0x10)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRB_B_ADDR          _SB_MAKE64(5)
+#define M_DMA_DSCRB_B_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR)
+
+#define S_DMA_DSCRB_B_SIZE          _SB_MAKE64(40)
+#define M_DMA_DSCRB_B_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE)
+#define V_DMA_DSCRB_B_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE)
+#define G_DMA_DSCRB_B_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE)
+
+#define M_DMA_DSCRB_B_VALID         _SB_MAKEMASK1(49)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKE64(48)
+#define M_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRB_PKT_SIZE        _SB_MAKE64(50)
+#define M_DMA_DSCRB_PKT_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE)
+#define V_DMA_DSCRB_PKT_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE)
+#define G_DMA_DSCRB_PKT_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE)
+
+/*
+ * from pass2 some bits in dscr_b are also used for rx status
+ */
+#define S_DMA_DSCRB_STATUS          _SB_MAKE64(0)
+#define M_DMA_DSCRB_STATUS          _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS)
+#define V_DMA_DSCRB_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS)
+#define G_DMA_DSCRB_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS)
+
+/*
+ * Ethernet Descriptor Status Bits (Table 7-15)
+ */
+
+#define M_DMA_ETHRX_BADIP4CS        _SB_MAKEMASK1(51)
+#define M_DMA_ETHRX_DSCRERR	    _SB_MAKEMASK1(52)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
+#define M_DMA_ETHRX_BADTCPCS	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
+#define M_DMA_ETH_VLAN_FLAG	_SB_MAKEMASK1(1)
+#define M_DMA_ETH_CRC_FLAG	_SB_MAKEMASK1(2)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_ETHRX_RXCH            53
+#define M_DMA_ETHRX_RXCH            _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH)
+#define V_DMA_ETHRX_RXCH(x)         _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH)
+#define G_DMA_ETHRX_RXCH(x)         _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH)
+
+#define S_DMA_ETHRX_PKTTYPE         55
+#define M_DMA_ETHRX_PKTTYPE         _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE)
+#define V_DMA_ETHRX_PKTTYPE(x)      _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE)
+#define G_DMA_ETHRX_PKTTYPE(x)      _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE)
+
+#define K_DMA_ETHRX_PKTTYPE_IPV4    0
+#define K_DMA_ETHRX_PKTTYPE_ARPV4   1
+#define K_DMA_ETHRX_PKTTYPE_802     2
+#define K_DMA_ETHRX_PKTTYPE_OTHER   3
+#define K_DMA_ETHRX_PKTTYPE_USER0   4
+#define K_DMA_ETHRX_PKTTYPE_USER1   5
+#define K_DMA_ETHRX_PKTTYPE_USER2   6
+#define K_DMA_ETHRX_PKTTYPE_USER3   7
+
+#define M_DMA_ETHRX_MATCH_HASH      _SB_MAKEMASK1(58)
+#define M_DMA_ETHRX_MATCH_EXACT     _SB_MAKEMASK1(59)
+#define M_DMA_ETHRX_BCAST           _SB_MAKEMASK1(60)
+#define M_DMA_ETHRX_MCAST           _SB_MAKEMASK1(61)
+#define M_DMA_ETHRX_BAD	            _SB_MAKEMASK1(62)
+#define M_DMA_ETHRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Status Bits (Table 7-16)
+ */
+
+#define M_DMA_ETHTX_SOP	    	    _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Options (Table 7-17)
+ */
+
+#define K_DMA_ETHTX_NOTSOP          _SB_MAKE64(0x00)
+#define K_DMA_ETHTX_APPENDCRC       _SB_MAKE64(0x01)
+#define K_DMA_ETHTX_REPLACECRC      _SB_MAKE64(0x02)
+#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03)
+#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04)
+#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05)
+#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6)
+#define K_DMA_ETHTX_NOMODS          _SB_MAKE64(0x07)
+#define K_DMA_ETHTX_RESERVED1       _SB_MAKE64(0x08)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C)
+#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E)
+#define K_DMA_ETHTX_RESERVED2       _SB_MAKE64(0x0F)
+
+/*
+ * Serial Receive Options (Table 7-18)
+ */
+#define M_DMA_SERRX_CRC_ERROR       _SB_MAKEMASK1(56)
+#define M_DMA_SERRX_ABORT           _SB_MAKEMASK1(57)
+#define M_DMA_SERRX_OCTET_ERROR     _SB_MAKEMASK1(58)
+#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59)
+#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60)
+#define M_DMA_SERRX_OVERRUN_ERROR   _SB_MAKEMASK1(61)
+#define M_DMA_SERRX_GOOD            _SB_MAKEMASK1(62)
+#define M_DMA_SERRX_SOP             _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Status Bits (Table 7-20)
+ */
+
+#define M_DMA_SERTX_FLAG	    _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Options (Table 7-21)
+ */
+
+#define K_DMA_SERTX_RESERVED        _SB_MAKEMASK1(0)
+#define K_DMA_SERTX_APPENDCRC       _SB_MAKEMASK1(1)
+#define K_DMA_SERTX_APPENDPAD       _SB_MAKEMASK1(2)
+#define K_DMA_SERTX_ABORT           _SB_MAKEMASK1(3)
+
+
+/*  *********************************************************************
+    *  Data Mover Registers
+    ********************************************************************* */
+
+/*
+ * Data Mover Descriptor Base Address Register (Table 7-22)
+ * Register: DM_DSCR_BASE_0
+ * Register: DM_DSCR_BASE_1
+ * Register: DM_DSCR_BASE_2
+ * Register: DM_DSCR_BASE_3
+ */
+
+#define M_DM_DSCR_BASE_MBZ          _SB_MAKEMASK(4, 0)
+
+/*  Note: Just mask the base address and then OR it in. */
+#define S_DM_DSCR_BASE_ADDR         _SB_MAKE64(4)
+#define M_DM_DSCR_BASE_ADDR         _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR)
+
+#define S_DM_DSCR_BASE_RINGSZ       _SB_MAKE64(40)
+#define M_DM_DSCR_BASE_RINGSZ       _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ)
+#define V_DM_DSCR_BASE_RINGSZ(x)    _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ)
+#define G_DM_DSCR_BASE_RINGSZ(x)    _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ)
+
+#define S_DM_DSCR_BASE_PRIORITY     _SB_MAKE64(56)
+#define M_DM_DSCR_BASE_PRIORITY     _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY)
+#define V_DM_DSCR_BASE_PRIORITY(x)  _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY)
+#define G_DM_DSCR_BASE_PRIORITY(x)  _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY)
+
+#define K_DM_DSCR_BASE_PRIORITY_1   0
+#define K_DM_DSCR_BASE_PRIORITY_2   1
+#define K_DM_DSCR_BASE_PRIORITY_4   2
+#define K_DM_DSCR_BASE_PRIORITY_8   3
+#define K_DM_DSCR_BASE_PRIORITY_16  4
+
+#define M_DM_DSCR_BASE_ACTIVE       _SB_MAKEMASK1(59)
+#define M_DM_DSCR_BASE_INTERRUPT    _SB_MAKEMASK1(60)
+#define M_DM_DSCR_BASE_RESET        _SB_MAKEMASK1(61)	/* write register */
+#define M_DM_DSCR_BASE_ERROR        _SB_MAKEMASK1(61)	/* read register */
+#define M_DM_DSCR_BASE_ABORT        _SB_MAKEMASK1(62)
+#define M_DM_DSCR_BASE_ENABL        _SB_MAKEMASK1(63)
+
+/*
+ * Data Mover Descriptor Count Register (Table 7-25)
+ */
+
+/* no bitfields */
+
+/*
+ * Data Mover Current Descriptor Address (Table 7-24)
+ * Register: DM_CUR_DSCR_ADDR_0
+ * Register: DM_CUR_DSCR_ADDR_1
+ * Register: DM_CUR_DSCR_ADDR_2
+ * Register: DM_CUR_DSCR_ADDR_3
+ */
+
+#define S_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKE64(0)
+#define M_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR)
+
+#define S_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKE64(48)
+#define M_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT)
+#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT)
+#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\
+                                     M_DM_CUR_DSCR_DSCR_COUNT)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover Channel Partial Result Registers
+ * Register: DM_PARTIAL_0
+ * Register: DM_PARTIAL_1
+ * Register: DM_PARTIAL_2
+ * Register: DM_PARTIAL_3
+ */
+#define S_DM_PARTIAL_CRC_PARTIAL      _SB_MAKE64(0)
+#define M_DM_PARTIAL_CRC_PARTIAL      _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL)
+#define V_DM_PARTIAL_CRC_PARTIAL(r)   _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL)
+#define G_DM_PARTIAL_CRC_PARTIAL(r)   _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\
+                                       M_DM_PARTIAL_CRC_PARTIAL)
+
+#define S_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKE64(32)
+#define M_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\
+                                       M_DM_PARTIAL_TCPCS_PARTIAL)
+
+#define M_DM_PARTIAL_ODD_BYTE         _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC Definition Registers
+ * Register: CRC_DEF_0
+ * Register: CRC_DEF_1
+ */
+#define S_CRC_DEF_CRC_INIT            _SB_MAKE64(0)
+#define M_CRC_DEF_CRC_INIT            _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT)
+#define V_CRC_DEF_CRC_INIT(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT)
+#define G_CRC_DEF_CRC_INIT(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\
+                                       M_CRC_DEF_CRC_INIT)
+
+#define S_CRC_DEF_CRC_POLY            _SB_MAKE64(32)
+#define M_CRC_DEF_CRC_POLY            _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY)
+#define V_CRC_DEF_CRC_POLY(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY)
+#define G_CRC_DEF_CRC_POLY(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\
+                                       M_CRC_DEF_CRC_POLY)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC/Checksum Definition Registers
+ * Register: CTCP_DEF_0
+ * Register: CTCP_DEF_1
+ */
+#define S_CTCP_DEF_CRC_TXOR           _SB_MAKE64(0)
+#define M_CTCP_DEF_CRC_TXOR           _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR)
+#define V_CTCP_DEF_CRC_TXOR(r)        _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR)
+#define G_CTCP_DEF_CRC_TXOR(r)        _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\
+                                       M_CTCP_DEF_CRC_TXOR)
+
+#define S_CTCP_DEF_TCPCS_INIT         _SB_MAKE64(32)
+#define M_CTCP_DEF_TCPCS_INIT         _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT)
+#define V_CTCP_DEF_TCPCS_INIT(r)      _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT)
+#define G_CTCP_DEF_TCPCS_INIT(r)      _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\
+                                       M_CTCP_DEF_TCPCS_INIT)
+
+#define S_CTCP_DEF_CRC_WIDTH          _SB_MAKE64(48)
+#define M_CTCP_DEF_CRC_WIDTH          _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH)
+#define V_CTCP_DEF_CRC_WIDTH(r)       _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH)
+#define G_CTCP_DEF_CRC_WIDTH(r)       _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\
+                                       M_CTCP_DEF_CRC_WIDTH)
+
+#define K_CTCP_DEF_CRC_WIDTH_4        0
+#define K_CTCP_DEF_CRC_WIDTH_2        1
+#define K_CTCP_DEF_CRC_WIDTH_1        2
+
+#define M_CTCP_DEF_CRC_BIT_ORDER      _SB_MAKEMASK1(50)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+/*
+ * Data Mover Descriptor Doubleword "A"  (Table 7-26)
+ */
+
+#define S_DM_DSCRA_DST_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRA_DST_ADDR         _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR)
+
+#define M_DM_DSCRA_UN_DEST          _SB_MAKEMASK1(40)
+#define M_DM_DSCRA_UN_SRC           _SB_MAKEMASK1(41)
+#define M_DM_DSCRA_INTERRUPT        _SB_MAKEMASK1(42)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_DM_DSCRA_THROTTLE         _SB_MAKEMASK1(43)
+#endif /* up to 1250 PASS1 */
+
+#define S_DM_DSCRA_DIR_DEST         _SB_MAKE64(44)
+#define M_DM_DSCRA_DIR_DEST         _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST(x)      _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST)
+#define G_DM_DSCRA_DIR_DEST(x)      _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST)
+
+#define K_DM_DSCRA_DIR_DEST_INCR    0
+#define K_DM_DSCRA_DIR_DEST_DECR    1
+#define K_DM_DSCRA_DIR_DEST_CONST   2
+
+#define V_DM_DSCRA_DIR_DEST_INCR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_DECR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_CONST   _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST)
+
+#define S_DM_DSCRA_DIR_SRC          _SB_MAKE64(46)
+#define M_DM_DSCRA_DIR_SRC          _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC(x)       _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC)
+#define G_DM_DSCRA_DIR_SRC(x)       _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC)
+
+#define K_DM_DSCRA_DIR_SRC_INCR     0
+#define K_DM_DSCRA_DIR_SRC_DECR     1
+#define K_DM_DSCRA_DIR_SRC_CONST    2
+
+#define V_DM_DSCRA_DIR_SRC_INCR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_DECR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_CONST    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC)
+
+
+#define M_DM_DSCRA_ZERO_MEM         _SB_MAKEMASK1(48)
+#define M_DM_DSCRA_PREFETCH         _SB_MAKEMASK1(49)
+#define M_DM_DSCRA_L2C_DEST         _SB_MAKEMASK1(50)
+#define M_DM_DSCRA_L2C_SRC          _SB_MAKEMASK1(51)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_RD_BKOFF	    _SB_MAKEMASK1(52)
+#define M_DM_DSCRA_WR_BKOFF	    _SB_MAKEMASK1(53)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_TCPCS_EN         _SB_MAKEMASK1(54)
+#define M_DM_DSCRA_TCPCS_RES        _SB_MAKEMASK1(55)
+#define M_DM_DSCRA_TCPCS_AP         _SB_MAKEMASK1(56)
+#define M_DM_DSCRA_CRC_EN           _SB_MAKEMASK1(57)
+#define M_DM_DSCRA_CRC_RES          _SB_MAKEMASK1(58)
+#define M_DM_DSCRA_CRC_AP           _SB_MAKEMASK1(59)
+#define M_DM_DSCRA_CRC_DFN          _SB_MAKEMASK1(60)
+#define M_DM_DSCRA_CRC_XBIT         _SB_MAKEMASK1(61)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DM_DSCRA_RESERVED2        _SB_MAKEMASK(3, 61)
+
+/*
+ * Data Mover Descriptor Doubleword "B"  (Table 7-25)
+ */
+
+#define S_DM_DSCRB_SRC_ADDR         _SB_MAKE64(0)
+#define M_DM_DSCRB_SRC_ADDR         _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR)
+
+#define S_DM_DSCRB_SRC_LENGTH       _SB_MAKE64(40)
+#define M_DM_DSCRB_SRC_LENGTH       _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH)
+#define V_DM_DSCRB_SRC_LENGTH(x)    _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH)
+#define G_DM_DSCRB_SRC_LENGTH(x)    _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h
new file mode 100644
index 0000000..94e9c7c
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h
@@ -0,0 +1,474 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Generic Bus Constants                     File: sb1250_genbus.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's Generic Bus interface
+    *
+    *  SB1250 specification level:  User's manual 10/21/02
+    *  BCM1280 specification level: User's Manual 11/14/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_GENBUS_H
+#define _SB1250_GENBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Generic Bus Region Configuration Registers (Table 11-4)
+ */
+
+#define S_IO_RDY_ACTIVE         0
+#define M_IO_RDY_ACTIVE		_SB_MAKEMASK1(S_IO_RDY_ACTIVE)
+
+#define S_IO_ENA_RDY            1
+#define M_IO_ENA_RDY		_SB_MAKEMASK1(S_IO_ENA_RDY)
+
+#define S_IO_WIDTH_SEL		2
+#define M_IO_WIDTH_SEL		_SB_MAKEMASK(2, S_IO_WIDTH_SEL)
+#define K_IO_WIDTH_SEL_1	0
+#define K_IO_WIDTH_SEL_2	1
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_IO_WIDTH_SEL_1L       2
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define K_IO_WIDTH_SEL_4	3
+#define V_IO_WIDTH_SEL(x)	_SB_MAKEVALUE(x, S_IO_WIDTH_SEL)
+#define G_IO_WIDTH_SEL(x)	_SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL)
+
+#define S_IO_PARITY_ENA		4
+#define M_IO_PARITY_ENA		_SB_MAKEMASK1(S_IO_PARITY_ENA)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_EN		5
+#define M_IO_BURST_EN		_SB_MAKEMASK1(S_IO_BURST_EN)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define S_IO_PARITY_ODD		6
+#define M_IO_PARITY_ODD		_SB_MAKEMASK1(S_IO_PARITY_ODD)
+#define S_IO_NONMUX		7
+#define M_IO_NONMUX		_SB_MAKEMASK1(S_IO_NONMUX)
+
+#define S_IO_TIMEOUT		8
+#define M_IO_TIMEOUT		_SB_MAKEMASK(8, S_IO_TIMEOUT)
+#define V_IO_TIMEOUT(x)		_SB_MAKEVALUE(x, S_IO_TIMEOUT)
+#define G_IO_TIMEOUT(x)		_SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT)
+
+/*
+ * Generic Bus Region Size register (Table 11-5)
+ */
+
+#define S_IO_MULT_SIZE		0
+#define M_IO_MULT_SIZE		_SB_MAKEMASK(12, S_IO_MULT_SIZE)
+#define V_IO_MULT_SIZE(x)	_SB_MAKEVALUE(x, S_IO_MULT_SIZE)
+#define G_IO_MULT_SIZE(x)	_SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE)
+
+#define S_IO_REGSIZE		16	 /* # bits to shift size for this reg */
+
+/*
+ * Generic Bus Region Address (Table 11-6)
+ */
+
+#define S_IO_START_ADDR		0
+#define M_IO_START_ADDR		_SB_MAKEMASK(14, S_IO_START_ADDR)
+#define V_IO_START_ADDR(x)	_SB_MAKEVALUE(x, S_IO_START_ADDR)
+#define G_IO_START_ADDR(x)	_SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR)
+
+#define S_IO_ADDRBASE		16	 /* # bits to shift addr for this reg */
+
+#define M_IO_BLK_CACHE		_SB_MAKEMASK1(15)
+
+
+/*
+ * Generic Bus Timing 0 Registers (Table 11-7)
+ */
+
+#define S_IO_ALE_WIDTH		0
+#define M_IO_ALE_WIDTH		_SB_MAKEMASK(3, S_IO_ALE_WIDTH)
+#define V_IO_ALE_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_ALE_WIDTH)
+#define G_IO_ALE_WIDTH(x)	_SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_EARLY_CS	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_ALE_TO_CS		4
+#define M_IO_ALE_TO_CS		_SB_MAKEMASK(2, S_IO_ALE_TO_CS)
+#define V_IO_ALE_TO_CS(x)	_SB_MAKEVALUE(x, S_IO_ALE_TO_CS)
+#define G_IO_ALE_TO_CS(x)	_SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_WIDTH           _SB_MAKE64(6)
+#define M_IO_BURST_WIDTH           _SB_MAKEMASK(2, S_IO_BURST_WIDTH)
+#define V_IO_BURST_WIDTH(x)        _SB_MAKEVALUE(x, S_IO_BURST_WIDTH)
+#define G_IO_BURST_WIDTH(x)        _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_CS_WIDTH		8
+#define M_IO_CS_WIDTH		_SB_MAKEMASK(5, S_IO_CS_WIDTH)
+#define V_IO_CS_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_CS_WIDTH)
+#define G_IO_CS_WIDTH(x)	_SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH)
+
+#define S_IO_RDY_SMPLE		13
+#define M_IO_RDY_SMPLE		_SB_MAKEMASK(3, S_IO_RDY_SMPLE)
+#define V_IO_RDY_SMPLE(x)	_SB_MAKEVALUE(x, S_IO_RDY_SMPLE)
+#define G_IO_RDY_SMPLE(x)	_SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE)
+
+
+/*
+ * Generic Bus Timing 1 Registers (Table 11-8)
+ */
+
+#define S_IO_ALE_TO_WRITE	0
+#define M_IO_ALE_TO_WRITE	_SB_MAKEMASK(3, S_IO_ALE_TO_WRITE)
+#define V_IO_ALE_TO_WRITE(x)	_SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE)
+#define G_IO_ALE_TO_WRITE(x)	_SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+    || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_RDY_SYNC	        _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_WRITE_WIDTH	4
+#define M_IO_WRITE_WIDTH	_SB_MAKEMASK(4, S_IO_WRITE_WIDTH)
+#define V_IO_WRITE_WIDTH(x)	_SB_MAKEVALUE(x, S_IO_WRITE_WIDTH)
+#define G_IO_WRITE_WIDTH(x)	_SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH)
+
+#define S_IO_IDLE_CYCLE		8
+#define M_IO_IDLE_CYCLE		_SB_MAKEMASK(4, S_IO_IDLE_CYCLE)
+#define V_IO_IDLE_CYCLE(x)	_SB_MAKEVALUE(x, S_IO_IDLE_CYCLE)
+#define G_IO_IDLE_CYCLE(x)	_SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE)
+
+#define S_IO_OE_TO_CS		12
+#define M_IO_OE_TO_CS		_SB_MAKEMASK(2, S_IO_OE_TO_CS)
+#define V_IO_OE_TO_CS(x)	_SB_MAKEVALUE(x, S_IO_OE_TO_CS)
+#define G_IO_OE_TO_CS(x)	_SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS)
+
+#define S_IO_CS_TO_OE		14
+#define M_IO_CS_TO_OE		_SB_MAKEMASK(2, S_IO_CS_TO_OE)
+#define V_IO_CS_TO_OE(x)	_SB_MAKEVALUE(x, S_IO_CS_TO_OE)
+#define G_IO_CS_TO_OE(x)	_SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE)
+
+/*
+ * Generic Bus Interrupt Status Register (Table 11-9)
+ */
+
+#define M_IO_CS_ERR_INT		_SB_MAKEMASK(0, 8)
+#define M_IO_CS0_ERR_INT	_SB_MAKEMASK1(0)
+#define M_IO_CS1_ERR_INT	_SB_MAKEMASK1(1)
+#define M_IO_CS2_ERR_INT	_SB_MAKEMASK1(2)
+#define M_IO_CS3_ERR_INT	_SB_MAKEMASK1(3)
+#define M_IO_CS4_ERR_INT	_SB_MAKEMASK1(4)
+#define M_IO_CS5_ERR_INT	_SB_MAKEMASK1(5)
+#define M_IO_CS6_ERR_INT	_SB_MAKEMASK1(6)
+#define M_IO_CS7_ERR_INT	_SB_MAKEMASK1(7)
+
+#define M_IO_RD_PAR_INT		_SB_MAKEMASK1(9)
+#define M_IO_TIMEOUT_INT	_SB_MAKEMASK1(10)
+#define M_IO_ILL_ADDR_INT	_SB_MAKEMASK1(11)
+#define M_IO_MULT_CS_INT	_SB_MAKEMASK1(12)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_COH_ERR	        _SB_MAKEMASK1(14)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0		0
+#define M_IO_SLEW0		_SB_MAKEMASK(2, S_IO_SLEW0)
+#define V_IO_SLEW0(x)		_SB_MAKEVALUE(x, S_IO_SLEW0)
+#define G_IO_SLEW0(x)		_SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0)
+
+#define S_IO_DRV_A		2
+#define M_IO_DRV_A		_SB_MAKEMASK(2, S_IO_DRV_A)
+#define V_IO_DRV_A(x)		_SB_MAKEVALUE(x, S_IO_DRV_A)
+#define G_IO_DRV_A(x)		_SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A)
+
+#define S_IO_DRV_B		6
+#define M_IO_DRV_B		_SB_MAKEMASK(2, S_IO_DRV_B)
+#define V_IO_DRV_B(x)		_SB_MAKEVALUE(x, S_IO_DRV_B)
+#define G_IO_DRV_B(x)		_SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B)
+
+#define S_IO_DRV_C		10
+#define M_IO_DRV_C		_SB_MAKEMASK(2, S_IO_DRV_C)
+#define V_IO_DRV_C(x)		_SB_MAKEVALUE(x, S_IO_DRV_C)
+#define G_IO_DRV_C(x)		_SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C)
+
+#define S_IO_DRV_D		14
+#define M_IO_DRV_D		_SB_MAKEMASK(2, S_IO_DRV_D)
+#define V_IO_DRV_D(x)		_SB_MAKEVALUE(x, S_IO_DRV_D)
+#define G_IO_DRV_D(x)		_SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E		2
+#define M_IO_DRV_E		_SB_MAKEMASK(2, S_IO_DRV_E)
+#define V_IO_DRV_E(x)		_SB_MAKEVALUE(x, S_IO_DRV_E)
+#define G_IO_DRV_E(x)		_SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E)
+
+#define S_IO_DRV_F		6
+#define M_IO_DRV_F		_SB_MAKEMASK(2, S_IO_DRV_F)
+#define V_IO_DRV_F(x)		_SB_MAKEVALUE(x, S_IO_DRV_F)
+#define G_IO_DRV_F(x)		_SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F)
+
+#define S_IO_SLEW1		8
+#define M_IO_SLEW1		_SB_MAKEMASK(2, S_IO_SLEW1)
+#define V_IO_SLEW1(x)		_SB_MAKEVALUE(x, S_IO_SLEW1)
+#define G_IO_SLEW1(x)		_SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1)
+
+#define S_IO_DRV_G		10
+#define M_IO_DRV_G		_SB_MAKEMASK(2, S_IO_DRV_G)
+#define V_IO_DRV_G(x)		_SB_MAKEVALUE(x, S_IO_DRV_G)
+#define G_IO_DRV_G(x)		_SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G)
+
+#define S_IO_SLEW2		12
+#define M_IO_SLEW2		_SB_MAKEMASK(2, S_IO_SLEW2)
+#define V_IO_SLEW2(x)		_SB_MAKEVALUE(x, S_IO_SLEW2)
+#define G_IO_SLEW2(x)		_SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2)
+
+#define S_IO_DRV_H		14
+#define M_IO_DRV_H		_SB_MAKEMASK(2, S_IO_DRV_H)
+#define V_IO_DRV_H(x)		_SB_MAKEVALUE(x, S_IO_DRV_H)
+#define G_IO_DRV_H(x)		_SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J		2
+#define M_IO_DRV_J		_SB_MAKEMASK(2, S_IO_DRV_J)
+#define V_IO_DRV_J(x)		_SB_MAKEVALUE(x, S_IO_DRV_J)
+#define G_IO_DRV_J(x)		_SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J)
+
+#define S_IO_DRV_K		6
+#define M_IO_DRV_K		_SB_MAKEMASK(2, S_IO_DRV_K)
+#define V_IO_DRV_K(x)		_SB_MAKEVALUE(x, S_IO_DRV_K)
+#define G_IO_DRV_K(x)		_SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K)
+
+#define S_IO_DRV_L		10
+#define M_IO_DRV_L		_SB_MAKEMASK(2, S_IO_DRV_L)
+#define V_IO_DRV_L(x)		_SB_MAKEVALUE(x, S_IO_DRV_L)
+#define G_IO_DRV_L(x)		_SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L)
+
+#define S_IO_DRV_M		14
+#define M_IO_DRV_M		_SB_MAKEMASK(2, S_IO_DRV_M)
+#define V_IO_DRV_M(x)		_SB_MAKEVALUE(x, S_IO_DRV_M)
+#define G_IO_DRV_M(x)		_SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3		0
+#define M_IO_SLEW3		_SB_MAKEMASK(2, S_IO_SLEW3)
+#define V_IO_SLEW3(x)		_SB_MAKEVALUE(x, S_IO_SLEW3)
+#define G_IO_SLEW3(x)		_SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3)
+
+#define S_IO_DRV_N		2
+#define M_IO_DRV_N		_SB_MAKEMASK(2, S_IO_DRV_N)
+#define V_IO_DRV_N(x)		_SB_MAKEVALUE(x, S_IO_DRV_N)
+#define G_IO_DRV_N(x)		_SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N)
+
+#define S_IO_DRV_P		6
+#define M_IO_DRV_P		_SB_MAKEMASK(2, S_IO_DRV_P)
+#define V_IO_DRV_P(x)		_SB_MAKEVALUE(x, S_IO_DRV_P)
+#define G_IO_DRV_P(x)		_SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P)
+
+#define S_IO_DRV_Q		10
+#define M_IO_DRV_Q		_SB_MAKEMASK(2, S_IO_DRV_Q)
+#define V_IO_DRV_Q(x)		_SB_MAKEVALUE(x, S_IO_DRV_Q)
+#define G_IO_DRV_Q(x)		_SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q)
+
+#define S_IO_DRV_R		14
+#define M_IO_DRV_R		_SB_MAKEMASK(2, S_IO_DRV_R)
+#define V_IO_DRV_R(x)		_SB_MAKEVALUE(x, S_IO_DRV_R)
+#define G_IO_DRV_R(x)		_SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R)
+
+
+/*
+ * PCMCIA configuration register (Table 12-6)
+ */
+
+#define M_PCMCIA_CFG_ATTRMEM	_SB_MAKEMASK1(0)
+#define M_PCMCIA_CFG_3VEN	_SB_MAKEMASK1(1)
+#define M_PCMCIA_CFG_5VEN	_SB_MAKEMASK1(2)
+#define M_PCMCIA_CFG_VPPEN	_SB_MAKEMASK1(3)
+#define M_PCMCIA_CFG_RESET	_SB_MAKEMASK1(4)
+#define M_PCMCIA_CFG_APWRONEN	_SB_MAKEMASK1(5)
+#define M_PCMCIA_CFG_CDMASK	_SB_MAKEMASK1(6)
+#define M_PCMCIA_CFG_WPMASK	_SB_MAKEMASK1(7)
+#define M_PCMCIA_CFG_RDYMASK	_SB_MAKEMASK1(8)
+#define M_PCMCIA_CFG_PWRCTL	_SB_MAKEMASK1(9)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE		16
+#define M_PCMCIA_MODE		_SB_MAKEMASK(3, S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x)	_SB_MAKEVALUE(x, S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x)	_SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB	0	/* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB	1	/* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2	/* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4	/* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5	/* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6	/* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7	/* IDE "A", IDE "B" */
+#endif
+
+
+/*
+ * PCMCIA status register (Table 12-7)
+ */
+
+#define M_PCMCIA_STATUS_CD1	_SB_MAKEMASK1(0)
+#define M_PCMCIA_STATUS_CD2	_SB_MAKEMASK1(1)
+#define M_PCMCIA_STATUS_VS1	_SB_MAKEMASK1(2)
+#define M_PCMCIA_STATUS_VS2	_SB_MAKEMASK1(3)
+#define M_PCMCIA_STATUS_WP	_SB_MAKEMASK1(4)
+#define M_PCMCIA_STATUS_RDY	_SB_MAKEMASK1(5)
+#define M_PCMCIA_STATUS_3VEN	_SB_MAKEMASK1(6)
+#define M_PCMCIA_STATUS_5VEN	_SB_MAKEMASK1(7)
+#define M_PCMCIA_STATUS_CDCHG	_SB_MAKEMASK1(8)
+#define M_PCMCIA_STATUS_WPCHG	_SB_MAKEMASK1(9)
+#define M_PCMCIA_STATUS_RDYCHG	_SB_MAKEMASK1(10)
+
+/*
+ * GPIO Interrupt Type Register (table 13-3)
+ */
+
+#define K_GPIO_INTR_DISABLE	0
+#define K_GPIO_INTR_EDGE	1
+#define K_GPIO_INTR_LEVEL	2
+#define K_GPIO_INTR_SPLIT	3
+
+#define S_GPIO_INTR_TYPEX(n)	(((n)/2)*2)
+#define M_GPIO_INTR_TYPEX(n)	_SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n))
+#define V_GPIO_INTR_TYPEX(n, x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n))
+#define G_GPIO_INTR_TYPEX(n, x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n))
+
+#define S_GPIO_INTR_TYPE0	0
+#define M_GPIO_INTR_TYPE0	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE0)
+#define V_GPIO_INTR_TYPE0(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0)
+#define G_GPIO_INTR_TYPE0(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0)
+
+#define S_GPIO_INTR_TYPE2	2
+#define M_GPIO_INTR_TYPE2	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE2)
+#define V_GPIO_INTR_TYPE2(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2)
+#define G_GPIO_INTR_TYPE2(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2)
+
+#define S_GPIO_INTR_TYPE4	4
+#define M_GPIO_INTR_TYPE4	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE4)
+#define V_GPIO_INTR_TYPE4(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4)
+#define G_GPIO_INTR_TYPE4(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4)
+
+#define S_GPIO_INTR_TYPE6	6
+#define M_GPIO_INTR_TYPE6	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE6)
+#define V_GPIO_INTR_TYPE6(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6)
+#define G_GPIO_INTR_TYPE6(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6)
+
+#define S_GPIO_INTR_TYPE8	8
+#define M_GPIO_INTR_TYPE8	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE8)
+#define V_GPIO_INTR_TYPE8(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8)
+#define G_GPIO_INTR_TYPE8(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8)
+
+#define S_GPIO_INTR_TYPE10	10
+#define M_GPIO_INTR_TYPE10	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE10)
+#define V_GPIO_INTR_TYPE10(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10)
+#define G_GPIO_INTR_TYPE10(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10)
+
+#define S_GPIO_INTR_TYPE12	12
+#define M_GPIO_INTR_TYPE12	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE12)
+#define V_GPIO_INTR_TYPE12(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12)
+#define G_GPIO_INTR_TYPE12(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12)
+
+#define S_GPIO_INTR_TYPE14	14
+#define M_GPIO_INTR_TYPE14	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE14)
+#define V_GPIO_INTR_TYPE14(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14)
+#define G_GPIO_INTR_TYPE14(x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE	0
+#define K_GPIO_INTR_RISEEDGE	1
+#define K_GPIO_INTR_UNPRED1	2
+#define K_GPIO_INTR_UNPRED2	3
+
+#define S_GPIO_INTR_ATYPEX(n)	(((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n)	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n, x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n, x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0	0
+#define M_GPIO_INTR_ATYPE0	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2	2
+#define M_GPIO_INTR_ATYPE2	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4	4
+#define M_GPIO_INTR_ATYPE4	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6	6
+#define M_GPIO_INTR_ATYPE6	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8	8
+#define M_GPIO_INTR_ATYPE8	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10	10
+#define M_GPIO_INTR_ATYPE10	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12	12
+#define M_GPIO_INTR_ATYPE12	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14	14
+#define M_GPIO_INTR_ATYPE14	_SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x)	_SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x)	_SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h
new file mode 100644
index 0000000..f2850b4
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_int.h
@@ -0,0 +1,248 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Interrupt Mapper definitions		File: sb1250_int.h
+    *
+    *  This module contains constants for manipulating the SB1250's
+    *  interrupt mapper and definitions for the interrupt sources.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_INT_H
+#define _SB1250_INT_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Interrupt Mapper Constants
+    ********************************************************************* */
+
+/*
+ * Interrupt sources (Table 4-8, UM 0.2)
+ *
+ * First, the interrupt numbers.
+ */
+
+#define K_INT_SOURCES               64
+
+#define K_INT_WATCHDOG_TIMER_0      0
+#define K_INT_WATCHDOG_TIMER_1      1
+#define K_INT_TIMER_0               2
+#define K_INT_TIMER_1               3
+#define K_INT_TIMER_2               4
+#define K_INT_TIMER_3               5
+#define K_INT_SMB_0                 6
+#define K_INT_SMB_1                 7
+#define K_INT_UART_0                8
+#define K_INT_UART_1                9
+#define K_INT_SER_0                 10
+#define K_INT_SER_1                 11
+#define K_INT_PCMCIA                12
+#define K_INT_ADDR_TRAP             13
+#define K_INT_PERF_CNT              14
+#define K_INT_TRACE_FREEZE          15
+#define K_INT_BAD_ECC               16
+#define K_INT_COR_ECC               17
+#define K_INT_IO_BUS                18
+#define K_INT_MAC_0                 19
+#define K_INT_MAC_1                 20
+#define K_INT_MAC_2                 21
+#define K_INT_DM_CH_0               22
+#define K_INT_DM_CH_1               23
+#define K_INT_DM_CH_2               24
+#define K_INT_DM_CH_3               25
+#define K_INT_MBOX_0                26
+#define K_INT_MBOX_1                27
+#define K_INT_MBOX_2                28
+#define K_INT_MBOX_3                29
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_CYCLE_CP0_INT	    30
+#define K_INT_CYCLE_CP1_INT	    31
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define K_INT_GPIO_0                32
+#define K_INT_GPIO_1                33
+#define K_INT_GPIO_2                34
+#define K_INT_GPIO_3                35
+#define K_INT_GPIO_4                36
+#define K_INT_GPIO_5                37
+#define K_INT_GPIO_6                38
+#define K_INT_GPIO_7                39
+#define K_INT_GPIO_8                40
+#define K_INT_GPIO_9                41
+#define K_INT_GPIO_10               42
+#define K_INT_GPIO_11               43
+#define K_INT_GPIO_12               44
+#define K_INT_GPIO_13               45
+#define K_INT_GPIO_14               46
+#define K_INT_GPIO_15               47
+#define K_INT_LDT_FATAL             48
+#define K_INT_LDT_NONFATAL          49
+#define K_INT_LDT_SMI               50
+#define K_INT_LDT_NMI               51
+#define K_INT_LDT_INIT              52
+#define K_INT_LDT_STARTUP           53
+#define K_INT_LDT_EXT               54
+#define K_INT_PCI_ERROR             55
+#define K_INT_PCI_INTA              56
+#define K_INT_PCI_INTB              57
+#define K_INT_PCI_INTC              58
+#define K_INT_PCI_INTD              59
+#define K_INT_SPARE_2               60
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_MAC_0_CH1		    61
+#define K_INT_MAC_1_CH1		    62
+#define K_INT_MAC_2_CH1		    63
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define M_INT_WATCHDOG_TIMER_0      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
+#define M_INT_WATCHDOG_TIMER_1      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
+#define M_INT_TIMER_0               _SB_MAKEMASK1(K_INT_TIMER_0)
+#define M_INT_TIMER_1               _SB_MAKEMASK1(K_INT_TIMER_1)
+#define M_INT_TIMER_2               _SB_MAKEMASK1(K_INT_TIMER_2)
+#define M_INT_TIMER_3               _SB_MAKEMASK1(K_INT_TIMER_3)
+#define M_INT_SMB_0                 _SB_MAKEMASK1(K_INT_SMB_0)
+#define M_INT_SMB_1                 _SB_MAKEMASK1(K_INT_SMB_1)
+#define M_INT_UART_0                _SB_MAKEMASK1(K_INT_UART_0)
+#define M_INT_UART_1                _SB_MAKEMASK1(K_INT_UART_1)
+#define M_INT_SER_0                 _SB_MAKEMASK1(K_INT_SER_0)
+#define M_INT_SER_1                 _SB_MAKEMASK1(K_INT_SER_1)
+#define M_INT_PCMCIA                _SB_MAKEMASK1(K_INT_PCMCIA)
+#define M_INT_ADDR_TRAP             _SB_MAKEMASK1(K_INT_ADDR_TRAP)
+#define M_INT_PERF_CNT              _SB_MAKEMASK1(K_INT_PERF_CNT)
+#define M_INT_TRACE_FREEZE          _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
+#define M_INT_BAD_ECC               _SB_MAKEMASK1(K_INT_BAD_ECC)
+#define M_INT_COR_ECC               _SB_MAKEMASK1(K_INT_COR_ECC)
+#define M_INT_IO_BUS                _SB_MAKEMASK1(K_INT_IO_BUS)
+#define M_INT_MAC_0                 _SB_MAKEMASK1(K_INT_MAC_0)
+#define M_INT_MAC_1                 _SB_MAKEMASK1(K_INT_MAC_1)
+#define M_INT_MAC_2                 _SB_MAKEMASK1(K_INT_MAC_2)
+#define M_INT_DM_CH_0               _SB_MAKEMASK1(K_INT_DM_CH_0)
+#define M_INT_DM_CH_1               _SB_MAKEMASK1(K_INT_DM_CH_1)
+#define M_INT_DM_CH_2               _SB_MAKEMASK1(K_INT_DM_CH_2)
+#define M_INT_DM_CH_3               _SB_MAKEMASK1(K_INT_DM_CH_3)
+#define M_INT_MBOX_0                _SB_MAKEMASK1(K_INT_MBOX_0)
+#define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
+#define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
+#define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL              _SB_MAKEMASK(4, K_INT_MBOX_0)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
+#define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_INT_GPIO_0                _SB_MAKEMASK1(K_INT_GPIO_0)
+#define M_INT_GPIO_1                _SB_MAKEMASK1(K_INT_GPIO_1)
+#define M_INT_GPIO_2                _SB_MAKEMASK1(K_INT_GPIO_2)
+#define M_INT_GPIO_3                _SB_MAKEMASK1(K_INT_GPIO_3)
+#define M_INT_GPIO_4                _SB_MAKEMASK1(K_INT_GPIO_4)
+#define M_INT_GPIO_5                _SB_MAKEMASK1(K_INT_GPIO_5)
+#define M_INT_GPIO_6                _SB_MAKEMASK1(K_INT_GPIO_6)
+#define M_INT_GPIO_7                _SB_MAKEMASK1(K_INT_GPIO_7)
+#define M_INT_GPIO_8                _SB_MAKEMASK1(K_INT_GPIO_8)
+#define M_INT_GPIO_9                _SB_MAKEMASK1(K_INT_GPIO_9)
+#define M_INT_GPIO_10               _SB_MAKEMASK1(K_INT_GPIO_10)
+#define M_INT_GPIO_11               _SB_MAKEMASK1(K_INT_GPIO_11)
+#define M_INT_GPIO_12               _SB_MAKEMASK1(K_INT_GPIO_12)
+#define M_INT_GPIO_13               _SB_MAKEMASK1(K_INT_GPIO_13)
+#define M_INT_GPIO_14               _SB_MAKEMASK1(K_INT_GPIO_14)
+#define M_INT_GPIO_15               _SB_MAKEMASK1(K_INT_GPIO_15)
+#define M_INT_LDT_FATAL             _SB_MAKEMASK1(K_INT_LDT_FATAL)
+#define M_INT_LDT_NONFATAL          _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
+#define M_INT_LDT_SMI               _SB_MAKEMASK1(K_INT_LDT_SMI)
+#define M_INT_LDT_NMI               _SB_MAKEMASK1(K_INT_LDT_NMI)
+#define M_INT_LDT_INIT              _SB_MAKEMASK1(K_INT_LDT_INIT)
+#define M_INT_LDT_STARTUP           _SB_MAKEMASK1(K_INT_LDT_STARTUP)
+#define M_INT_LDT_EXT               _SB_MAKEMASK1(K_INT_LDT_EXT)
+#define M_INT_PCI_ERROR             _SB_MAKEMASK1(K_INT_PCI_ERROR)
+#define M_INT_PCI_INTA              _SB_MAKEMASK1(K_INT_PCI_INTA)
+#define M_INT_PCI_INTB              _SB_MAKEMASK1(K_INT_PCI_INTB)
+#define M_INT_PCI_INTC              _SB_MAKEMASK1(K_INT_PCI_INTC)
+#define M_INT_PCI_INTD              _SB_MAKEMASK1(K_INT_PCI_INTD)
+#define M_INT_SPARE_2               _SB_MAKEMASK1(K_INT_SPARE_2)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_MAC_0_CH1		    _SB_MAKEMASK1(K_INT_MAC_0_CH1)
+#define M_INT_MAC_1_CH1		    _SB_MAKEMASK1(K_INT_MAC_1_CH1)
+#define M_INT_MAC_2_CH1		    _SB_MAKEMASK1(K_INT_MAC_2_CH1)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Interrupt mappings
+ */
+
+#define K_INT_MAP_I0	0		/* interrupt pins on processor */
+#define K_INT_MAP_I1	1
+#define K_INT_MAP_I2	2
+#define K_INT_MAP_I3	3
+#define K_INT_MAP_I4	4
+#define K_INT_MAP_I5	5
+#define K_INT_MAP_NMI	6		/* nonmaskable */
+#define K_INT_MAP_DINT	7		/* debug interrupt */
+
+/*
+ * LDT Interrupt Set Register (table 4-5)
+ */
+
+#define S_INT_LDT_INTMSG	      0
+#define M_INT_LDT_INTMSG              _SB_MAKEMASK(3, S_INT_LDT_INTMSG)
+#define V_INT_LDT_INTMSG(x)           _SB_MAKEVALUE(x, S_INT_LDT_INTMSG)
+#define G_INT_LDT_INTMSG(x)           _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG)
+
+#define K_INT_LDT_INTMSG_FIXED	      0
+#define K_INT_LDT_INTMSG_ARBITRATED   1
+#define K_INT_LDT_INTMSG_SMI	      2
+#define K_INT_LDT_INTMSG_NMI	      3
+#define K_INT_LDT_INTMSG_INIT	      4
+#define K_INT_LDT_INTMSG_STARTUP      5
+#define K_INT_LDT_INTMSG_EXTINT	      6
+#define K_INT_LDT_INTMSG_RESERVED     7
+
+#define M_INT_LDT_EDGETRIGGER         0
+#define M_INT_LDT_LEVELTRIGGER        _SB_MAKEMASK1(3)
+
+#define M_INT_LDT_PHYSICALDEST        0
+#define M_INT_LDT_LOGICALDEST         _SB_MAKEMASK1(4)
+
+#define S_INT_LDT_INTDEST             5
+#define M_INT_LDT_INTDEST             _SB_MAKEMASK(10, S_INT_LDT_INTDEST)
+#define V_INT_LDT_INTDEST(x)          _SB_MAKEVALUE(x, S_INT_LDT_INTDEST)
+#define G_INT_LDT_INTDEST(x)          _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST)
+
+#define S_INT_LDT_VECTOR              13
+#define M_INT_LDT_VECTOR              _SB_MAKEMASK(8, S_INT_LDT_VECTOR)
+#define V_INT_LDT_VECTOR(x)           _SB_MAKEVALUE(x, S_INT_LDT_VECTOR)
+#define G_INT_LDT_VECTOR(x)           _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR)
+
+/*
+ * Vector format (Table 4-6)
+ */
+
+#define M_LDTVECT_RAISEINT		0x00
+#define M_LDTVECT_RAISEMBOX             0x40
+
+
+#endif	/* 1250/112x */
diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h
new file mode 100644
index 0000000..6554dcf
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h
@@ -0,0 +1,131 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  L2 Cache constants and macros		File: sb1250_l2c.h
+    *
+    *  This module contains constants useful for manipulating the
+    *  level 2 cache.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_L2C_H
+#define _SB1250_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Level 2 Cache Tag register (Table 5-3)
+ */
+
+#define S_L2C_TAG_MBZ               0
+#define M_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_L2C_TAG_MBZ)
+
+#define S_L2C_TAG_INDEX             5
+#define M_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_L2C_TAG_INDEX)
+#define V_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_L2C_TAG_INDEX)
+#define G_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX)
+
+#define S_L2C_TAG_TAG               17
+#define M_L2C_TAG_TAG               _SB_MAKEMASK(23, S_L2C_TAG_TAG)
+#define V_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_L2C_TAG_TAG)
+#define G_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG)
+
+#define S_L2C_TAG_ECC               40
+#define M_L2C_TAG_ECC               _SB_MAKEMASK(6, S_L2C_TAG_ECC)
+#define V_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_L2C_TAG_ECC)
+#define G_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC)
+
+#define S_L2C_TAG_WAY               46
+#define M_L2C_TAG_WAY               _SB_MAKEMASK(2, S_L2C_TAG_WAY)
+#define V_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_L2C_TAG_WAY)
+#define G_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY)
+
+#define M_L2C_TAG_DIRTY             _SB_MAKEMASK1(48)
+#define M_L2C_TAG_VALID             _SB_MAKEMASK1(49)
+
+/*
+ * Format of level 2 cache management address (table 5-2)
+ */
+
+#define S_L2C_MGMT_INDEX            5
+#define M_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_L2C_MGMT_INDEX)
+#define V_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX)
+#define G_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX)
+
+#define S_L2C_MGMT_QUADRANT         15
+#define M_L2C_MGMT_QUADRANT         _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT)
+#define V_L2C_MGMT_QUADRANT(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT)
+#define G_L2C_MGMT_QUADRANT(x)      _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT)
+
+#define S_L2C_MGMT_HALF		    16
+#define M_L2C_MGMT_HALF	            _SB_MAKEMASK(1, S_L2C_MGMT_HALF)
+
+#define S_L2C_MGMT_WAY              17
+#define M_L2C_MGMT_WAY              _SB_MAKEMASK(2, S_L2C_MGMT_WAY)
+#define V_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_WAY)
+#define G_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY)
+
+#define S_L2C_MGMT_ECC_DIAG         21
+#define M_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG              23
+#define M_L2C_MGMT_TAG              _SB_MAKEMASK(4, S_L2C_MGMT_TAG)
+#define V_L2C_MGMT_TAG(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_TAG)
+#define G_L2C_MGMT_TAG(x)           _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG)
+
+#define M_L2C_MGMT_DIRTY            _SB_MAKEMASK1(19)
+#define M_L2C_MGMT_VALID            _SB_MAKEMASK1(20)
+
+#define A_L2C_MGMT_TAG_BASE         0x00D0000000
+
+#define L2C_ENTRIES_PER_WAY       4096
+#define L2C_NUM_WAYS              4
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * L2 Read Misc. register (A_L2_READ_MISC)
+ */
+#define S_L2C_MISC_NO_WAY		10
+#define M_L2C_MISC_NO_WAY		_SB_MAKEMASK(4, S_L2C_MISC_NO_WAY)
+#define V_L2C_MISC_NO_WAY(x)		_SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY)
+#define G_L2C_MISC_NO_WAY(x)		_SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY)
+
+#define M_L2C_MISC_ECC_CLEANUP_DIS	_SB_MAKEMASK1(9)
+#define M_L2C_MISC_MC_PRIO_LOW		_SB_MAKEMASK1(8)
+#define M_L2C_MISC_SOFT_DISABLE_T	_SB_MAKEMASK1(7)
+#define M_L2C_MISC_SOFT_DISABLE_B	_SB_MAKEMASK1(6)
+#define M_L2C_MISC_SOFT_DISABLE_R	_SB_MAKEMASK1(5)
+#define M_L2C_MISC_SOFT_DISABLE_L	_SB_MAKEMASK1(4)
+#define M_L2C_MISC_SCACHE_DISABLE_T	_SB_MAKEMASK1(3)
+#define M_L2C_MISC_SCACHE_DISABLE_B	_SB_MAKEMASK1(2)
+#define M_L2C_MISC_SCACHE_DISABLE_R	_SB_MAKEMASK1(1)
+#define M_L2C_MISC_SCACHE_DISABLE_L	_SB_MAKEMASK1(0)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
new file mode 100644
index 0000000..081e8b1
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -0,0 +1,423 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  LDT constants				File: sb1250_ldt.h
+    *
+    *  This module contains constants and macros to describe
+    *  the LDT interface on the SB1250.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_LDT_H
+#define _SB1250_LDT_H
+
+#include "sb1250_defs.h"
+
+#define K_LDT_VENDOR_SIBYTE	0x166D
+#define K_LDT_DEVICE_SB1250	0x0002
+
+/*
+ * LDT Interface Type 1 (bridge) configuration header
+ */
+
+#define R_LDT_TYPE1_DEVICEID	0x0000
+#define R_LDT_TYPE1_CMDSTATUS	0x0004
+#define R_LDT_TYPE1_CLASSREV	0x0008
+#define R_LDT_TYPE1_DEVHDR	0x000C
+#define R_LDT_TYPE1_BAR0	0x0010	/* not used */
+#define R_LDT_TYPE1_BAR1	0x0014	/* not used */
+
+#define R_LDT_TYPE1_BUSID	0x0018	/* bus ID register */
+#define R_LDT_TYPE1_SECSTATUS	0x001C	/* secondary status / I/O base/limit */
+#define R_LDT_TYPE1_MEMLIMIT	0x0020
+#define R_LDT_TYPE1_PREFETCH	0x0024
+#define R_LDT_TYPE1_PREF_BASE	0x0028
+#define R_LDT_TYPE1_PREF_LIMIT	0x002C
+#define R_LDT_TYPE1_IOLIMIT	0x0030
+#define R_LDT_TYPE1_CAPPTR	0x0034
+#define R_LDT_TYPE1_ROMADDR	0x0038
+#define R_LDT_TYPE1_BRCTL	0x003C
+#define R_LDT_TYPE1_CMD		0x0040
+#define R_LDT_TYPE1_LINKCTRL	0x0044
+#define R_LDT_TYPE1_LINKFREQ	0x0048
+#define R_LDT_TYPE1_RESERVED1	0x004C
+#define R_LDT_TYPE1_SRICMD	0x0050
+#define R_LDT_TYPE1_SRITXNUM	0x0054
+#define R_LDT_TYPE1_SRIRXNUM	0x0058
+#define R_LDT_TYPE1_ERRSTATUS   0x0068
+#define R_LDT_TYPE1_SRICTRL	0x006C
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_LDT_TYPE1_ADDSTATUS	0x0070
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define R_LDT_TYPE1_TXBUFCNT	0x00C8
+#define R_LDT_TYPE1_EXPCRC	0x00DC
+#define R_LDT_TYPE1_RXCRC	0x00F0
+
+
+/*
+ * LDT Device ID register
+ */
+
+#define S_LDT_DEVICEID_VENDOR		0
+#define M_LDT_DEVICEID_VENDOR		_SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR)
+#define V_LDT_DEVICEID_VENDOR(x)	_SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR)
+#define G_LDT_DEVICEID_VENDOR(x)	_SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR)
+
+#define S_LDT_DEVICEID_DEVICEID		16
+#define M_LDT_DEVICEID_DEVICEID		_SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID)
+#define V_LDT_DEVICEID_DEVICEID(x)	_SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID)
+#define G_LDT_DEVICEID_DEVICEID(x)	_SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID)
+
+
+/*
+ * LDT Command Register (Table 8-13)
+ */
+
+#define M_LDT_CMD_IOSPACE_EN		_SB_MAKEMASK1_32(0)
+#define M_LDT_CMD_MEMSPACE_EN		_SB_MAKEMASK1_32(1)
+#define M_LDT_CMD_MASTER_EN		_SB_MAKEMASK1_32(2)
+#define M_LDT_CMD_SPECCYC_EN		_SB_MAKEMASK1_32(3)
+#define M_LDT_CMD_MEMWRINV_EN		_SB_MAKEMASK1_32(4)
+#define M_LDT_CMD_VGAPALSNP_EN		_SB_MAKEMASK1_32(5)
+#define M_LDT_CMD_PARERRRESP		_SB_MAKEMASK1_32(6)
+#define M_LDT_CMD_WAITCYCCTRL		_SB_MAKEMASK1_32(7)
+#define M_LDT_CMD_SERR_EN		_SB_MAKEMASK1_32(8)
+#define M_LDT_CMD_FASTB2B_EN		_SB_MAKEMASK1_32(9)
+
+/*
+ * LDT class and revision registers
+ */
+
+#define S_LDT_CLASSREV_REV		0
+#define M_LDT_CLASSREV_REV		_SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV)
+#define V_LDT_CLASSREV_REV(x)		_SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV)
+#define G_LDT_CLASSREV_REV(x)		_SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV)
+
+#define S_LDT_CLASSREV_CLASS		8
+#define M_LDT_CLASSREV_CLASS		_SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS)
+#define V_LDT_CLASSREV_CLASS(x)		_SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS)
+#define G_LDT_CLASSREV_CLASS(x)		_SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS)
+
+#define K_LDT_REV			0x01
+#define K_LDT_CLASS			0x060000
+
+/*
+ * Device Header (offset 0x0C)
+ */
+
+#define S_LDT_DEVHDR_CLINESZ		0
+#define M_LDT_DEVHDR_CLINESZ		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ)
+#define V_LDT_DEVHDR_CLINESZ(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ)
+#define G_LDT_DEVHDR_CLINESZ(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ)
+
+#define S_LDT_DEVHDR_LATTMR		8
+#define M_LDT_DEVHDR_LATTMR		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR)
+#define V_LDT_DEVHDR_LATTMR(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR)
+#define G_LDT_DEVHDR_LATTMR(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR)
+
+#define S_LDT_DEVHDR_HDRTYPE		16
+#define M_LDT_DEVHDR_HDRTYPE		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE)
+#define V_LDT_DEVHDR_HDRTYPE(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE)
+#define G_LDT_DEVHDR_HDRTYPE(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE)
+
+#define K_LDT_DEVHDR_HDRTYPE_TYPE1	1
+
+#define S_LDT_DEVHDR_BIST		24
+#define M_LDT_DEVHDR_BIST		_SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST)
+#define V_LDT_DEVHDR_BIST(x)		_SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST)
+#define G_LDT_DEVHDR_BIST(x)		_SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST)
+
+
+
+/*
+ * LDT Status Register (Table 8-14).  Note that these constants
+ * assume you've read the command and status register
+ * together (32-bit read at offset 0x04)
+ *
+ * These bits also apply to the secondary status
+ * register (Table 8-15), offset 0x1C
+ */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_STATUS_VGAEN		_SB_MAKEMASK1_32(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_LDT_STATUS_CAPLIST		_SB_MAKEMASK1_32(20)
+#define M_LDT_STATUS_66MHZCAP		_SB_MAKEMASK1_32(21)
+#define M_LDT_STATUS_RESERVED2		_SB_MAKEMASK1_32(22)
+#define M_LDT_STATUS_FASTB2BCAP		_SB_MAKEMASK1_32(23)
+#define M_LDT_STATUS_MSTRDPARERR	_SB_MAKEMASK1_32(24)
+
+#define S_LDT_STATUS_DEVSELTIMING	25
+#define M_LDT_STATUS_DEVSELTIMING	_SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING)
+#define V_LDT_STATUS_DEVSELTIMING(x)	_SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING)
+#define G_LDT_STATUS_DEVSELTIMING(x)	_SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING)
+
+#define M_LDT_STATUS_SIGDTGTABORT	_SB_MAKEMASK1_32(27)
+#define M_LDT_STATUS_RCVDTGTABORT	_SB_MAKEMASK1_32(28)
+#define M_LDT_STATUS_RCVDMSTRABORT	_SB_MAKEMASK1_32(29)
+#define M_LDT_STATUS_SIGDSERR		_SB_MAKEMASK1_32(30)
+#define M_LDT_STATUS_DETPARERR		_SB_MAKEMASK1_32(31)
+
+/*
+ * Bridge Control Register (Table 8-16).  Note that these
+ * constants assume you've read the register as a 32-bit
+ * read (offset 0x3C)
+ */
+
+#define M_LDT_BRCTL_PARERRRESP_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_BRCTL_SERR_EN		_SB_MAKEMASK1_32(17)
+#define M_LDT_BRCTL_ISA_EN		_SB_MAKEMASK1_32(18)
+#define M_LDT_BRCTL_VGA_EN		_SB_MAKEMASK1_32(19)
+#define M_LDT_BRCTL_MSTRABORTMODE	_SB_MAKEMASK1_32(21)
+#define M_LDT_BRCTL_SECBUSRESET		_SB_MAKEMASK1_32(22)
+#define M_LDT_BRCTL_FASTB2B_EN		_SB_MAKEMASK1_32(23)
+#define M_LDT_BRCTL_PRIDISCARD		_SB_MAKEMASK1_32(24)
+#define M_LDT_BRCTL_SECDISCARD		_SB_MAKEMASK1_32(25)
+#define M_LDT_BRCTL_DISCARDSTAT		_SB_MAKEMASK1_32(26)
+#define M_LDT_BRCTL_DISCARDSERR_EN	_SB_MAKEMASK1_32(27)
+
+/*
+ * LDT Command Register (Table 8-17).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x40
+ */
+
+#define M_LDT_CMD_WARMRESET		_SB_MAKEMASK1_32(16)
+#define M_LDT_CMD_DOUBLEENDED		_SB_MAKEMASK1_32(17)
+
+#define S_LDT_CMD_CAPTYPE		29
+#define M_LDT_CMD_CAPTYPE		_SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE)
+#define V_LDT_CMD_CAPTYPE(x)		_SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE)
+#define G_LDT_CMD_CAPTYPE(x)		_SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE)
+
+/*
+ * LDT link control register (Table 8-18), and (Table 8-19)
+ */
+
+#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_LINKCTRL_CRCSTARTTEST	_SB_MAKEMASK1_32(2)
+#define M_LDT_LINKCTRL_CRCFORCEERR	_SB_MAKEMASK1_32(3)
+#define M_LDT_LINKCTRL_LINKFAIL		_SB_MAKEMASK1_32(4)
+#define M_LDT_LINKCTRL_INITDONE		_SB_MAKEMASK1_32(5)
+#define M_LDT_LINKCTRL_EOC		_SB_MAKEMASK1_32(6)
+#define M_LDT_LINKCTRL_XMITOFF		_SB_MAKEMASK1_32(7)
+
+#define S_LDT_LINKCTRL_CRCERR		8
+#define M_LDT_LINKCTRL_CRCERR		_SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR)
+#define V_LDT_LINKCTRL_CRCERR(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR)
+#define G_LDT_LINKCTRL_CRCERR(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR)
+
+#define S_LDT_LINKCTRL_MAXIN		16
+#define M_LDT_LINKCTRL_MAXIN		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN)
+#define V_LDT_LINKCTRL_MAXIN(x)		_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN)
+#define G_LDT_LINKCTRL_MAXIN(x)		_SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN)
+
+#define M_LDT_LINKCTRL_DWFCLN		_SB_MAKEMASK1_32(19)
+
+#define S_LDT_LINKCTRL_MAXOUT		20
+#define M_LDT_LINKCTRL_MAXOUT		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT)
+#define V_LDT_LINKCTRL_MAXOUT(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT)
+#define G_LDT_LINKCTRL_MAXOUT(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT		_SB_MAKEMASK1_32(23)
+
+#define S_LDT_LINKCTRL_WIDTHIN		24
+#define M_LDT_LINKCTRL_WIDTHIN		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN)
+#define V_LDT_LINKCTRL_WIDTHIN(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN)
+#define G_LDT_LINKCTRL_WIDTHIN(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN)
+
+#define M_LDT_LINKCTRL_DWFCLIN_EN	_SB_MAKEMASK1_32(27)
+
+#define S_LDT_LINKCTRL_WIDTHOUT		28
+#define M_LDT_LINKCTRL_WIDTHOUT		_SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT)
+#define V_LDT_LINKCTRL_WIDTHOUT(x)	_SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT)
+#define G_LDT_LINKCTRL_WIDTHOUT(x)	_SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT_EN	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Link frequency register  (Table 8-20) offset 0x48
+ */
+
+#define S_LDT_LINKFREQ_FREQ		8
+#define M_LDT_LINKFREQ_FREQ		_SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ)
+#define V_LDT_LINKFREQ_FREQ(x)		_SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ)
+#define G_LDT_LINKFREQ_FREQ(x)		_SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ)
+
+#define K_LDT_LINKFREQ_200MHZ		0
+#define K_LDT_LINKFREQ_300MHZ		1
+#define K_LDT_LINKFREQ_400MHZ		2
+#define K_LDT_LINKFREQ_500MHZ		3
+#define K_LDT_LINKFREQ_600MHZ		4
+#define K_LDT_LINKFREQ_800MHZ		5
+#define K_LDT_LINKFREQ_1000MHZ		6
+
+/*
+ * LDT SRI Command Register (Table 8-21).  Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x50
+ */
+
+#define M_LDT_SRICMD_SIPREADY		_SB_MAKEMASK1_32(16)
+#define M_LDT_SRICMD_SYNCPTRCTL		_SB_MAKEMASK1_32(17)
+#define M_LDT_SRICMD_REDUCESYNCZERO	_SB_MAKEMASK1_32(18)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_LDT_SRICMD_DISSTARVATIONCNT	_SB_MAKEMASK1_32(19)	/* PASS1 */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_SRICMD_DISMULTTXVLD	_SB_MAKEMASK1_32(19)
+#define M_LDT_SRICMD_EXPENDIAN		_SB_MAKEMASK1_32(26)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+#define S_LDT_SRICMD_RXMARGIN		20
+#define M_LDT_SRICMD_RXMARGIN		_SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN)
+#define V_LDT_SRICMD_RXMARGIN(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN)
+#define G_LDT_SRICMD_RXMARGIN(x)	_SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN)
+
+#define M_LDT_SRICMD_LDTPLLCOMPAT	_SB_MAKEMASK1_32(25)
+
+#define S_LDT_SRICMD_TXINITIALOFFSET	28
+#define M_LDT_SRICMD_TXINITIALOFFSET	_SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET)
+#define V_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET)
+#define G_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET)
+
+#define M_LDT_SRICMD_LINKFREQDIRECT	_SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Error control and status register (Table 8-22) (Table 8-23)
+ */
+
+#define M_LDT_ERRCTL_PROTFATAL_EN	_SB_MAKEMASK1_32(0)
+#define M_LDT_ERRCTL_PROTNONFATAL_EN	_SB_MAKEMASK1_32(1)
+#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN	_SB_MAKEMASK1_32(2)
+#define M_LDT_ERRCTL_OVFFATAL_EN	_SB_MAKEMASK1_32(3)
+#define M_LDT_ERRCTL_OVFNONFATAL_EN	_SB_MAKEMASK1_32(4)
+#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN	_SB_MAKEMASK1_32(5)
+#define M_LDT_ERRCTL_EOCNXAFATAL_EN	_SB_MAKEMASK1_32(6)
+#define M_LDT_ERRCTL_EOCNXANONFATAL_EN	_SB_MAKEMASK1_32(7)
+#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(8)
+#define M_LDT_ERRCTL_CRCFATAL_EN	_SB_MAKEMASK1_32(9)
+#define M_LDT_ERRCTL_CRCNONFATAL_EN	_SB_MAKEMASK1_32(10)
+#define M_LDT_ERRCTL_SERRFATAL_EN	_SB_MAKEMASK1_32(11)
+#define M_LDT_ERRCTL_SRCTAGFATAL_EN	_SB_MAKEMASK1_32(12)
+#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN	_SB_MAKEMASK1_32(13)
+#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN	_SB_MAKEMASK1_32(14)
+#define M_LDT_ERRCTL_MAPNXAFATAL_EN	_SB_MAKEMASK1_32(15)
+#define M_LDT_ERRCTL_MAPNXANONFATAL_EN	_SB_MAKEMASK1_32(16)
+#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(17)
+
+#define M_LDT_ERRCTL_PROTOERR		_SB_MAKEMASK1_32(24)
+#define M_LDT_ERRCTL_OVFERR		_SB_MAKEMASK1_32(25)
+#define M_LDT_ERRCTL_EOCNXAERR		_SB_MAKEMASK1_32(26)
+#define M_LDT_ERRCTL_SRCTAGERR		_SB_MAKEMASK1_32(27)
+#define M_LDT_ERRCTL_MAPNXAERR		_SB_MAKEMASK1_32(28)
+
+/*
+ * SRI Control register (Table 8-24, 8-25)  Offset 0x6C
+ */
+
+#define S_LDT_SRICTRL_NEEDRESP		0
+#define M_LDT_SRICTRL_NEEDRESP		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP)
+#define V_LDT_SRICTRL_NEEDRESP(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP)
+#define G_LDT_SRICTRL_NEEDRESP(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP)
+
+#define S_LDT_SRICTRL_NEEDNPREQ		2
+#define M_LDT_SRICTRL_NEEDNPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ)
+#define V_LDT_SRICTRL_NEEDNPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ)
+#define G_LDT_SRICTRL_NEEDNPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ)
+
+#define S_LDT_SRICTRL_NEEDPREQ		4
+#define M_LDT_SRICTRL_NEEDPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ)
+#define V_LDT_SRICTRL_NEEDPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ)
+#define G_LDT_SRICTRL_NEEDPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ)
+
+#define S_LDT_SRICTRL_WANTRESP		8
+#define M_LDT_SRICTRL_WANTRESP		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP)
+#define V_LDT_SRICTRL_WANTRESP(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP)
+#define G_LDT_SRICTRL_WANTRESP(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP)
+
+#define S_LDT_SRICTRL_WANTNPREQ		10
+#define M_LDT_SRICTRL_WANTNPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ)
+#define V_LDT_SRICTRL_WANTNPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ)
+#define G_LDT_SRICTRL_WANTNPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ)
+
+#define S_LDT_SRICTRL_WANTPREQ		12
+#define M_LDT_SRICTRL_WANTPREQ		_SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ)
+#define V_LDT_SRICTRL_WANTPREQ(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ)
+#define G_LDT_SRICTRL_WANTPREQ(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ)
+
+#define S_LDT_SRICTRL_BUFRELSPACE	16
+#define M_LDT_SRICTRL_BUFRELSPACE	_SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE)
+#define V_LDT_SRICTRL_BUFRELSPACE(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE)
+#define G_LDT_SRICTRL_BUFRELSPACE(x)	_SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE)
+
+/*
+ * LDT SRI Transmit Buffer Count register (Table 8-26)
+ */
+
+#define S_LDT_TXBUFCNT_PCMD		0
+#define M_LDT_TXBUFCNT_PCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD)
+#define V_LDT_TXBUFCNT_PCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD)
+#define G_LDT_TXBUFCNT_PCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD)
+
+#define S_LDT_TXBUFCNT_PDATA		4
+#define M_LDT_TXBUFCNT_PDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA)
+#define V_LDT_TXBUFCNT_PDATA(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA)
+#define G_LDT_TXBUFCNT_PDATA(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA)
+
+#define S_LDT_TXBUFCNT_NPCMD		8
+#define M_LDT_TXBUFCNT_NPCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD)
+#define V_LDT_TXBUFCNT_NPCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD)
+#define G_LDT_TXBUFCNT_NPCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD)
+
+#define S_LDT_TXBUFCNT_NPDATA		12
+#define M_LDT_TXBUFCNT_NPDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA)
+#define V_LDT_TXBUFCNT_NPDATA(x)	_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA)
+#define G_LDT_TXBUFCNT_NPDATA(x)	_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA)
+
+#define S_LDT_TXBUFCNT_RCMD		16
+#define M_LDT_TXBUFCNT_RCMD		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD)
+#define V_LDT_TXBUFCNT_RCMD(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD)
+#define G_LDT_TXBUFCNT_RCMD(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD)
+
+#define S_LDT_TXBUFCNT_RDATA		20
+#define M_LDT_TXBUFCNT_RDATA		_SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA)
+#define V_LDT_TXBUFCNT_RDATA(x)		_SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA)
+#define G_LDT_TXBUFCNT_RDATA(x)		_SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Additional Status Register
+ */
+
+#define S_LDT_ADDSTATUS_TGTDONE		0
+#define M_LDT_ADDSTATUS_TGTDONE		_SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE)
+#define V_LDT_ADDSTATUS_TGTDONE(x)	_SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE)
+#define G_LDT_ADDSTATUS_TGTDONE(x)	_SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
new file mode 100644
index 0000000..b6faf08
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -0,0 +1,656 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  MAC constants and macros			File: sb1250_mac.h
+    *
+    *  This module contains constants and macros for the SB1250's
+    *  ethernet controllers.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MAC_H
+#define _SB1250_MAC_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  Ethernet MAC Registers
+    ********************************************************************* */
+
+/*
+ * MAC Configuration Register (Table 9-13)
+ * Register: MAC_CFG_0
+ * Register: MAC_CFG_1
+ * Register: MAC_CFG_2
+ */
+
+
+#define M_MAC_RESERVED0             _SB_MAKEMASK1(0)
+#define M_MAC_TX_HOLD_SOP_EN        _SB_MAKEMASK1(1)
+#define M_MAC_RETRY_EN              _SB_MAKEMASK1(2)
+#define M_MAC_RET_DRPREQ_EN         _SB_MAKEMASK1(3)
+#define M_MAC_RET_UFL_EN            _SB_MAKEMASK1(4)
+#define M_MAC_BURST_EN              _SB_MAKEMASK1(5)
+
+#define S_MAC_TX_PAUSE              _SB_MAKE64(6)
+#define M_MAC_TX_PAUSE_CNT          _SB_MAKEMASK(3, S_MAC_TX_PAUSE)
+#define V_MAC_TX_PAUSE_CNT(x)       _SB_MAKEVALUE(x, S_MAC_TX_PAUSE)
+
+#define K_MAC_TX_PAUSE_CNT_512      0
+#define K_MAC_TX_PAUSE_CNT_1K       1
+#define K_MAC_TX_PAUSE_CNT_2K       2
+#define K_MAC_TX_PAUSE_CNT_4K       3
+#define K_MAC_TX_PAUSE_CNT_8K       4
+#define K_MAC_TX_PAUSE_CNT_16K      5
+#define K_MAC_TX_PAUSE_CNT_32K      6
+#define K_MAC_TX_PAUSE_CNT_64K      7
+
+#define V_MAC_TX_PAUSE_CNT_512      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
+#define V_MAC_TX_PAUSE_CNT_1K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
+#define V_MAC_TX_PAUSE_CNT_2K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
+#define V_MAC_TX_PAUSE_CNT_4K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
+#define V_MAC_TX_PAUSE_CNT_8K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
+#define V_MAC_TX_PAUSE_CNT_16K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
+#define V_MAC_TX_PAUSE_CNT_32K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
+#define V_MAC_TX_PAUSE_CNT_64K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
+
+#define M_MAC_RESERVED1             _SB_MAKEMASK(8, 9)
+
+#define M_MAC_AP_STAT_EN            _SB_MAKEMASK1(17)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP		    _SB_MAKEMASK1(18)
+#endif
+#define M_MAC_DRP_ERRPKT_EN         _SB_MAKEMASK1(19)
+#define M_MAC_DRP_FCSERRPKT_EN      _SB_MAKEMASK1(20)
+#define M_MAC_DRP_CODEERRPKT_EN     _SB_MAKEMASK1(21)
+#define M_MAC_DRP_DRBLERRPKT_EN     _SB_MAKEMASK1(22)
+#define M_MAC_DRP_RNTPKT_EN         _SB_MAKEMASK1(23)
+#define M_MAC_DRP_OSZPKT_EN         _SB_MAKEMASK1(24)
+#define M_MAC_DRP_LENERRPKT_EN      _SB_MAKEMASK1(25)
+
+#define M_MAC_RESERVED3             _SB_MAKEMASK(6, 26)
+
+#define M_MAC_BYPASS_SEL            _SB_MAKEMASK1(32)
+#define M_MAC_HDX_EN                _SB_MAKEMASK1(33)
+
+#define S_MAC_SPEED_SEL             _SB_MAKE64(34)
+#define M_MAC_SPEED_SEL             _SB_MAKEMASK(2, S_MAC_SPEED_SEL)
+#define V_MAC_SPEED_SEL(x)	    _SB_MAKEVALUE(x, S_MAC_SPEED_SEL)
+#define G_MAC_SPEED_SEL(x)	    _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL)
+
+#define K_MAC_SPEED_SEL_10MBPS      0
+#define K_MAC_SPEED_SEL_100MBPS     1
+#define K_MAC_SPEED_SEL_1000MBPS    2
+#define K_MAC_SPEED_SEL_RESERVED    3
+
+#define V_MAC_SPEED_SEL_10MBPS      V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
+#define V_MAC_SPEED_SEL_100MBPS     V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
+#define V_MAC_SPEED_SEL_1000MBPS    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS)
+#define V_MAC_SPEED_SEL_RESERVED    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED)
+
+#define M_MAC_TX_CLK_EDGE_SEL       _SB_MAKEMASK1(36)
+#define M_MAC_LOOPBACK_SEL          _SB_MAKEMASK1(37)
+#define M_MAC_FAST_SYNC             _SB_MAKEMASK1(38)
+#define M_MAC_SS_EN                 _SB_MAKEMASK1(39)
+
+#define S_MAC_BYPASS_CFG	    _SB_MAKE64(40)
+#define M_MAC_BYPASS_CFG            _SB_MAKEMASK(2, S_MAC_BYPASS_CFG)
+#define V_MAC_BYPASS_CFG(x)         _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG)
+#define G_MAC_BYPASS_CFG(x)         _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG)
+
+#define K_MAC_BYPASS_GMII	    0
+#define K_MAC_BYPASS_ENCODED        1
+#define K_MAC_BYPASS_SOP            2
+#define K_MAC_BYPASS_EOP            3
+
+#define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
+#define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH_SEL_MSB	    _SB_MAKEMASK1(44)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_BYPASS_IFG            _SB_MAKE64(46)
+#define M_MAC_BYPASS_IFG            _SB_MAKEMASK(8, S_MAC_BYPASS_IFG)
+#define V_MAC_BYPASS_IFG(x)	    _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG)
+#define G_MAC_BYPASS_IFG(x)	    _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG)
+
+#define K_MAC_FC_CMD_DISABLED       0
+#define K_MAC_FC_CMD_ENABLED        1
+#define K_MAC_FC_CMD_ENAB_FALSECARR 2
+
+#define V_MAC_FC_CMD_DISABLED       V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
+#define V_MAC_FC_CMD_ENABLED        V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
+#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR)
+
+#define M_MAC_FC_SEL                _SB_MAKEMASK1(54)
+
+#define S_MAC_FC_CMD                _SB_MAKE64(55)
+#define M_MAC_FC_CMD                _SB_MAKEMASK(2, S_MAC_FC_CMD)
+#define V_MAC_FC_CMD(x)	            _SB_MAKEVALUE(x, S_MAC_FC_CMD)
+#define G_MAC_FC_CMD(x)	            _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD)
+
+#define S_MAC_RX_CH_SEL             _SB_MAKE64(57)
+#define M_MAC_RX_CH_SEL             _SB_MAKEMASK(7, S_MAC_RX_CH_SEL)
+#define V_MAC_RX_CH_SEL(x)          _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL)
+#define G_MAC_RX_CH_SEL(x)          _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL)
+
+
+/*
+ * MAC Enable Registers
+ * Register: MAC_ENABLE_0
+ * Register: MAC_ENABLE_1
+ * Register: MAC_ENABLE_2
+ */
+
+#define M_MAC_RXDMA_EN0	            _SB_MAKEMASK1(0)
+#define M_MAC_RXDMA_EN1	            _SB_MAKEMASK1(1)
+#define M_MAC_TXDMA_EN0	            _SB_MAKEMASK1(4)
+#define M_MAC_TXDMA_EN1	            _SB_MAKEMASK1(5)
+
+#define M_MAC_PORT_RESET            _SB_MAKEMASK1(8)
+
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+#define M_MAC_RX_ENABLE             _SB_MAKEMASK1(10)
+#define M_MAC_TX_ENABLE             _SB_MAKEMASK1(11)
+#define M_MAC_BYP_RX_ENABLE         _SB_MAKEMASK1(12)
+#define M_MAC_BYP_TX_ENABLE         _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON	_SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON	_SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON	_SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON	_SB_MAKEMASK1(32)
+#endif
+
+/*
+ * MAC DMA Control Register
+ * Register: MAC_TXD_CTL_0
+ * Register: MAC_TXD_CTL_1
+ * Register: MAC_TXD_CTL_2
+ */
+
+#define S_MAC_TXD_WEIGHT0	    _SB_MAKE64(0)
+#define M_MAC_TXD_WEIGHT0	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0)
+#define V_MAC_TXD_WEIGHT0(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0)
+#define G_MAC_TXD_WEIGHT0(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0)
+
+#define S_MAC_TXD_WEIGHT1	    _SB_MAKE64(4)
+#define M_MAC_TXD_WEIGHT1	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1)
+#define V_MAC_TXD_WEIGHT1(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1)
+#define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
+
+/*
+ * MAC Fifo Threshhold registers (Table 9-14)
+ * Register: MAC_THRSH_CFG_0
+ * Register: MAC_THRSH_CFG_1
+ * Register: MAC_THRSH_CFG_2
+ */
+
+#define S_MAC_TX_WR_THRSH           _SB_MAKE64(0)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH)
+#define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH)
+
+#define S_MAC_TX_RD_THRSH           _SB_MAKE64(8)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
+/* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH)
+#define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH)
+
+#define S_MAC_TX_RL_THRSH           _SB_MAKE64(16)
+#define M_MAC_TX_RL_THRSH           _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH)
+#define V_MAC_TX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH)
+#define G_MAC_TX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH)
+
+#define S_MAC_RX_PL_THRSH           _SB_MAKE64(24)
+#define M_MAC_RX_PL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH)
+#define V_MAC_RX_PL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH)
+#define G_MAC_RX_PL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH)
+
+#define S_MAC_RX_RD_THRSH           _SB_MAKE64(32)
+#define M_MAC_RX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH)
+#define V_MAC_RX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH)
+#define G_MAC_RX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH)
+
+#define S_MAC_RX_RL_THRSH           _SB_MAKE64(40)
+#define M_MAC_RX_RL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH)
+#define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH)
+#define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
+#define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH)
+#define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH)
+#define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Frame Configuration Registers (Table 9-15)
+ * Register: MAC_FRAME_CFG_0
+ * Register: MAC_FRAME_CFG_1
+ * Register: MAC_FRAME_CFG_2
+ */
+
+/* XXXCGD: ??? Unused in pass2? */
+#define S_MAC_IFG_RX                _SB_MAKE64(0)
+#define M_MAC_IFG_RX                _SB_MAKEMASK(6, S_MAC_IFG_RX)
+#define V_MAC_IFG_RX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_RX)
+#define G_MAC_IFG_RX(x)             _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_PRE_LEN               _SB_MAKE64(0)
+#define M_MAC_PRE_LEN               _SB_MAKEMASK(6, S_MAC_PRE_LEN)
+#define V_MAC_PRE_LEN(x)            _SB_MAKEVALUE(x, S_MAC_PRE_LEN)
+#define G_MAC_PRE_LEN(x)            _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_IFG_TX                _SB_MAKE64(6)
+#define M_MAC_IFG_TX                _SB_MAKEMASK(6, S_MAC_IFG_TX)
+#define V_MAC_IFG_TX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_TX)
+#define G_MAC_IFG_TX(x)             _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX)
+
+#define S_MAC_IFG_THRSH             _SB_MAKE64(12)
+#define M_MAC_IFG_THRSH             _SB_MAKEMASK(6, S_MAC_IFG_THRSH)
+#define V_MAC_IFG_THRSH(x)          _SB_MAKEVALUE(x, S_MAC_IFG_THRSH)
+#define G_MAC_IFG_THRSH(x)          _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH)
+
+#define S_MAC_BACKOFF_SEL           _SB_MAKE64(18)
+#define M_MAC_BACKOFF_SEL           _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL)
+#define V_MAC_BACKOFF_SEL(x)        _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL)
+#define G_MAC_BACKOFF_SEL(x)        _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL)
+
+#define S_MAC_LFSR_SEED             _SB_MAKE64(22)
+#define M_MAC_LFSR_SEED             _SB_MAKEMASK(8, S_MAC_LFSR_SEED)
+#define V_MAC_LFSR_SEED(x)          _SB_MAKEVALUE(x, S_MAC_LFSR_SEED)
+#define G_MAC_LFSR_SEED(x)          _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED)
+
+#define S_MAC_SLOT_SIZE             _SB_MAKE64(30)
+#define M_MAC_SLOT_SIZE             _SB_MAKEMASK(10, S_MAC_SLOT_SIZE)
+#define V_MAC_SLOT_SIZE(x)          _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE)
+#define G_MAC_SLOT_SIZE(x)          _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE)
+
+#define S_MAC_MIN_FRAMESZ           _SB_MAKE64(40)
+#define M_MAC_MIN_FRAMESZ           _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ)
+#define V_MAC_MIN_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ)
+#define G_MAC_MIN_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ)
+
+#define S_MAC_MAX_FRAMESZ           _SB_MAKE64(48)
+#define M_MAC_MAX_FRAMESZ           _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ)
+#define V_MAC_MAX_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ)
+#define G_MAC_MAX_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ)
+
+/*
+ * These constants are used to configure the fields within the Frame
+ * Configuration Register.
+ */
+
+#define K_MAC_IFG_RX_10             _SB_MAKE64(0)	/* See table 176, not used */
+#define K_MAC_IFG_RX_100            _SB_MAKE64(0)
+#define K_MAC_IFG_RX_1000           _SB_MAKE64(0)
+
+#define K_MAC_IFG_TX_10             _SB_MAKE64(20)
+#define K_MAC_IFG_TX_100            _SB_MAKE64(20)
+#define K_MAC_IFG_TX_1000           _SB_MAKE64(8)
+
+#define K_MAC_IFG_THRSH_10          _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_100         _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_1000        _SB_MAKE64(0)
+
+#define K_MAC_SLOT_SIZE_10          _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_100         _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_1000        _SB_MAKE64(0)
+
+#define V_MAC_IFG_RX_10        V_MAC_IFG_RX(K_MAC_IFG_RX_10)
+#define V_MAC_IFG_RX_100       V_MAC_IFG_RX(K_MAC_IFG_RX_100)
+#define V_MAC_IFG_RX_1000      V_MAC_IFG_RX(K_MAC_IFG_RX_1000)
+
+#define V_MAC_IFG_TX_10        V_MAC_IFG_TX(K_MAC_IFG_TX_10)
+#define V_MAC_IFG_TX_100       V_MAC_IFG_TX(K_MAC_IFG_TX_100)
+#define V_MAC_IFG_TX_1000      V_MAC_IFG_TX(K_MAC_IFG_TX_1000)
+
+#define V_MAC_IFG_THRSH_10     V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10)
+#define V_MAC_IFG_THRSH_100    V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100)
+#define V_MAC_IFG_THRSH_1000   V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000)
+
+#define V_MAC_SLOT_SIZE_10     V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10)
+#define V_MAC_SLOT_SIZE_100    V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100)
+#define V_MAC_SLOT_SIZE_1000   V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000)
+
+#define K_MAC_MIN_FRAMESZ_FIFO      _SB_MAKE64(9)
+#define K_MAC_MIN_FRAMESZ_DEFAULT   _SB_MAKE64(64)
+#define K_MAC_MAX_FRAMESZ_DEFAULT   _SB_MAKE64(1518)
+#define K_MAC_MAX_FRAMESZ_JUMBO     _SB_MAKE64(9216)
+
+#define V_MAC_MIN_FRAMESZ_FIFO      V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
+#define V_MAC_MIN_FRAMESZ_DEFAULT   V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_DEFAULT   V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_JUMBO     V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
+
+/*
+ * MAC VLAN Tag Registers (Table 9-16)
+ * Register: MAC_VLANTAG_0
+ * Register: MAC_VLANTAG_1
+ * Register: MAC_VLANTAG_2
+ */
+
+#define S_MAC_VLAN_TAG           _SB_MAKE64(0)
+#define M_MAC_VLAN_TAG           _SB_MAKEMASK(32, S_MAC_VLAN_TAG)
+#define V_MAC_VLAN_TAG(x)        _SB_MAKEVALUE(x, S_MAC_VLAN_TAG)
+#define G_MAC_VLAN_TAG(x)        _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_TX_PKT_OFFSET      _SB_MAKE64(32)
+#define M_MAC_TX_PKT_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET)
+#define V_MAC_TX_PKT_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET)
+#define G_MAC_TX_PKT_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET)
+
+#define S_MAC_TX_CRC_OFFSET      _SB_MAKE64(40)
+#define M_MAC_TX_CRC_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET)
+#define V_MAC_TX_CRC_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET)
+#define G_MAC_TX_CRC_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET)
+
+#define M_MAC_CH_BASE_FC_EN      _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Status Registers (Table 9-17)
+ * Also used for the MAC Interrupt Mask Register (Table 9-18)
+ * Register: MAC_STATUS_0
+ * Register: MAC_STATUS_1
+ * Register: MAC_STATUS_2
+ * Register: MAC_INT_MASK_0
+ * Register: MAC_INT_MASK_1
+ * Register: MAC_INT_MASK_2
+ */
+
+/*
+ * Use these constants to shift the appropriate channel
+ * into the CH0 position so the same tests can be used
+ * on each channel.
+ */
+
+#define S_MAC_RX_CH0                _SB_MAKE64(0)
+#define S_MAC_RX_CH1                _SB_MAKE64(8)
+#define S_MAC_TX_CH0                _SB_MAKE64(16)
+#define S_MAC_TX_CH1                _SB_MAKE64(24)
+
+#define S_MAC_TXCHANNELS	    _SB_MAKE64(16)	/* this is 1st TX chan */
+#define S_MAC_CHANWIDTH             _SB_MAKE64(8)	/* bits between channels */
+
+/*
+ *  These are the same as RX channel 0.  The idea here
+ *  is that you'll use one of the "S_" things above
+ *  and pass just the six bits to a DMA-channel-specific ISR
+ */
+#define M_MAC_INT_CHANNEL           _SB_MAKEMASK(8, 0)
+#define M_MAC_INT_EOP_COUNT         _SB_MAKEMASK1(0)
+#define M_MAC_INT_EOP_TIMER         _SB_MAKEMASK1(1)
+#define M_MAC_INT_EOP_SEEN          _SB_MAKEMASK1(2)
+#define M_MAC_INT_HWM               _SB_MAKEMASK1(3)
+#define M_MAC_INT_LWM               _SB_MAKEMASK1(4)
+#define M_MAC_INT_DSCR              _SB_MAKEMASK1(5)
+#define M_MAC_INT_ERR               _SB_MAKEMASK1(6)
+#define M_MAC_INT_DZERO             _SB_MAKEMASK1(7)	/* only for TX channels */
+#define M_MAC_INT_DROP              _SB_MAKEMASK1(7)	/* only for RX channels */
+
+/*
+ * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see
+ * also DMA_TX/DMA_RX in sb_regs.h).
+ */
+#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH)
+
+#define M_MAC_STATUS_CHANNEL(ch, txrx)   _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_SEEN(ch, txrx)  _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_HWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_LWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DSCR(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_ERR(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DZERO(ch, txrx)     _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DROP(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_OTHER_ERR           _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40)
+
+
+#define M_MAC_RX_UNDRFL             _SB_MAKEMASK1(40)
+#define M_MAC_RX_OVRFL              _SB_MAKEMASK1(41)
+#define M_MAC_TX_UNDRFL             _SB_MAKEMASK1(42)
+#define M_MAC_TX_OVRFL              _SB_MAKEMASK1(43)
+#define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
+#define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
+#define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
+#define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR)
+#define V_MAC_COUNTER_ADDR(x)       _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR)
+#define G_MAC_COUNTER_ADDR(x)       _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_PAUSE_ON	    _SB_MAKEMASK1(52)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Fifo Pointer Registers (Table 9-19)    [Debug register]
+ * Register: MAC_FIFO_PTRS_0
+ * Register: MAC_FIFO_PTRS_1
+ * Register: MAC_FIFO_PTRS_2
+ */
+
+#define S_MAC_TX_WRPTR              _SB_MAKE64(0)
+#define M_MAC_TX_WRPTR              _SB_MAKEMASK(6, S_MAC_TX_WRPTR)
+#define V_MAC_TX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_WRPTR)
+#define G_MAC_TX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_TX_RDPTR              _SB_MAKE64(8)
+#define M_MAC_TX_RDPTR              _SB_MAKEMASK(6, S_MAC_TX_RDPTR)
+#define V_MAC_TX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_RDPTR)
+#define G_MAC_TX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR)
+
+#define S_MAC_RX_WRPTR              _SB_MAKE64(16)
+#define M_MAC_RX_WRPTR              _SB_MAKEMASK(6, S_MAC_RX_WRPTR)
+#define V_MAC_RX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_WRPTR)
+#define G_MAC_RX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_RX_RDPTR              _SB_MAKE64(24)
+#define M_MAC_RX_RDPTR              _SB_MAKEMASK(6, S_MAC_RX_RDPTR)
+#define V_MAC_RX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_RDPTR)
+#define G_MAC_RX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR)
+
+/*
+ * MAC Fifo End Of Packet Count Registers (Table 9-20)  [Debug register]
+ * Register: MAC_EOPCNT_0
+ * Register: MAC_EOPCNT_1
+ * Register: MAC_EOPCNT_2
+ */
+
+#define S_MAC_TX_EOP_COUNTER        _SB_MAKE64(0)
+#define M_MAC_TX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER)
+#define V_MAC_TX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER)
+#define G_MAC_TX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER)
+
+#define S_MAC_RX_EOP_COUNTER        _SB_MAKE64(8)
+#define M_MAC_RX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER)
+#define V_MAC_RX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER)
+#define G_MAC_RX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
+
+/*
+ * MAC Recieve Address Filter Exact Match Registers (Table 9-21)
+ * Registers: MAC_ADDR0_0 through MAC_ADDR7_0
+ * Registers: MAC_ADDR0_1 through MAC_ADDR7_1
+ * Registers: MAC_ADDR0_2 through MAC_ADDR7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Receive Address Filter Mask Registers
+ * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1
+ * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1
+ * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Recieve Address Filter Hash Match Registers (Table 9-22)
+ * Registers: MAC_HASH0_0 through MAC_HASH7_0
+ * Registers: MAC_HASH0_1 through MAC_HASH7_1
+ * Registers: MAC_HASH0_2 through MAC_HASH7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Transmit Source Address Registers (Table 9-23)
+ * Register: MAC_ETHERNET_ADDR_0
+ * Register: MAC_ETHERNET_ADDR_1
+ * Register: MAC_ETHERNET_ADDR_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Packet Type Configuration Register
+ * Register: MAC_TYPE_CFG_0
+ * Register: MAC_TYPE_CFG_1
+ * Register: MAC_TYPE_CFG_2
+ */
+
+#define S_TYPECFG_TYPESIZE      _SB_MAKE64(16)
+
+#define S_TYPECFG_TYPE0		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE0         _SB_MAKEMASK(16, S_TYPECFG_TYPE0)
+#define V_TYPECFG_TYPE0(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE0)
+#define G_TYPECFG_TYPE0(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0)
+
+#define S_TYPECFG_TYPE1		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE1         _SB_MAKEMASK(16, S_TYPECFG_TYPE1)
+#define V_TYPECFG_TYPE1(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE1)
+#define G_TYPECFG_TYPE1(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1)
+
+#define S_TYPECFG_TYPE2		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE2         _SB_MAKEMASK(16, S_TYPECFG_TYPE2)
+#define V_TYPECFG_TYPE2(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE2)
+#define G_TYPECFG_TYPE2(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2)
+
+#define S_TYPECFG_TYPE3		_SB_MAKE64(0)
+#define M_TYPECFG_TYPE3         _SB_MAKEMASK(16, S_TYPECFG_TYPE3)
+#define V_TYPECFG_TYPE3(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE3)
+#define G_TYPECFG_TYPE3(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3)
+
+/*
+ * MAC Receive Address Filter Control Registers (Table 9-24)
+ * Register: MAC_ADFILTER_CFG_0
+ * Register: MAC_ADFILTER_CFG_1
+ * Register: MAC_ADFILTER_CFG_2
+ */
+
+#define M_MAC_ALLPKT_EN	        _SB_MAKEMASK1(0)
+#define M_MAC_UCAST_EN          _SB_MAKEMASK1(1)
+#define M_MAC_UCAST_INV         _SB_MAKEMASK1(2)
+#define M_MAC_MCAST_EN          _SB_MAKEMASK1(3)
+#define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
+#define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
+#define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
+#define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET)
+#define V_MAC_IPHDR_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET)
+#define G_MAC_IPHDR_OFFSET(x)	_SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_RX_CRC_OFFSET     _SB_MAKE64(16)
+#define M_MAC_RX_CRC_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET)
+#define V_MAC_RX_CRC_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET)
+#define G_MAC_RX_CRC_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET)
+
+#define S_MAC_RX_PKT_OFFSET     _SB_MAKE64(24)
+#define M_MAC_RX_PKT_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET)
+#define V_MAC_RX_PKT_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET)
+#define G_MAC_RX_PKT_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET)
+
+#define M_MAC_FWDPAUSE_EN	_SB_MAKEMASK1(32)
+#define M_MAC_VLAN_DET_EN	_SB_MAKEMASK1(33)
+
+#define S_MAC_RX_CH_MSN_SEL     _SB_MAKE64(34)
+#define M_MAC_RX_CH_MSN_SEL     _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL)
+#define V_MAC_RX_CH_MSN_SEL(x)	_SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL)
+#define G_MAC_RX_CH_MSN_SEL(x)	_SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Receive Channel Select Registers (Table 9-25)
+ */
+
+/* no bitfields */
+
+/*
+ * MAC MII Management Interface Registers (Table 9-26)
+ * Register: MAC_MDIO_0
+ * Register: MAC_MDIO_1
+ * Register: MAC_MDIO_2
+ */
+
+#define S_MAC_MDC		0
+#define S_MAC_MDIO_DIR		1
+#define S_MAC_MDIO_OUT		2
+#define S_MAC_GENC		3
+#define S_MAC_MDIO_IN		4
+
+#define M_MAC_MDC		_SB_MAKEMASK1(S_MAC_MDC)
+#define M_MAC_MDIO_DIR		_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_DIR_INPUT	_SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_OUT		_SB_MAKEMASK1(S_MAC_MDIO_OUT)
+#define M_MAC_GENC		_SB_MAKEMASK1(S_MAC_GENC)
+#define M_MAC_MDIO_IN		_SB_MAKEMASK1(S_MAC_MDIO_IN)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h
new file mode 100644
index 0000000..1eb1b5a
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mc.h
@@ -0,0 +1,550 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Memory Controller constants              File: sb1250_mc.h
+    *
+    *  This module contains constants and macros useful for
+    *  programming the memory controller.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000, 2001, 2002, 2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_MC_H
+#define _SB1250_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Config Register (table 6-14)
+ */
+
+#define S_MC_RESERVED0              0
+#define M_MC_RESERVED0              _SB_MAKEMASK(8, S_MC_RESERVED0)
+
+#define S_MC_CHANNEL_SEL            8
+#define M_MC_CHANNEL_SEL            _SB_MAKEMASK(8, S_MC_CHANNEL_SEL)
+#define V_MC_CHANNEL_SEL(x)         _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL)
+#define G_MC_CHANNEL_SEL(x)         _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL)
+
+#define S_MC_BANK0_MAP              16
+#define M_MC_BANK0_MAP              _SB_MAKEMASK(4, S_MC_BANK0_MAP)
+#define V_MC_BANK0_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK0_MAP)
+#define G_MC_BANK0_MAP(x)           _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP)
+
+#define K_MC_BANK0_MAP_DEFAULT      0x00
+#define V_MC_BANK0_MAP_DEFAULT      V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
+
+#define S_MC_BANK1_MAP              20
+#define M_MC_BANK1_MAP              _SB_MAKEMASK(4, S_MC_BANK1_MAP)
+#define V_MC_BANK1_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK1_MAP)
+#define G_MC_BANK1_MAP(x)           _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP)
+
+#define K_MC_BANK1_MAP_DEFAULT      0x08
+#define V_MC_BANK1_MAP_DEFAULT      V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
+
+#define S_MC_BANK2_MAP              24
+#define M_MC_BANK2_MAP              _SB_MAKEMASK(4, S_MC_BANK2_MAP)
+#define V_MC_BANK2_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK2_MAP)
+#define G_MC_BANK2_MAP(x)           _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP)
+
+#define K_MC_BANK2_MAP_DEFAULT      0x09
+#define V_MC_BANK2_MAP_DEFAULT      V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
+
+#define S_MC_BANK3_MAP              28
+#define M_MC_BANK3_MAP              _SB_MAKEMASK(4, S_MC_BANK3_MAP)
+#define V_MC_BANK3_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK3_MAP)
+#define G_MC_BANK3_MAP(x)           _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP)
+
+#define K_MC_BANK3_MAP_DEFAULT      0x0C
+#define V_MC_BANK3_MAP_DEFAULT      V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
+
+#define M_MC_RESERVED1              _SB_MAKEMASK(8, 32)
+
+#define S_MC_QUEUE_SIZE		    40
+#define M_MC_QUEUE_SIZE             _SB_MAKEMASK(4, S_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE(x)          _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE)
+#define G_MC_QUEUE_SIZE(x)          _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE_DEFAULT     V_MC_QUEUE_SIZE(0x0A)
+
+#define S_MC_AGE_LIMIT              44
+#define M_MC_AGE_LIMIT              _SB_MAKEMASK(4, S_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT(x)           _SB_MAKEVALUE(x, S_MC_AGE_LIMIT)
+#define G_MC_AGE_LIMIT(x)           _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT_DEFAULT      V_MC_AGE_LIMIT(8)
+
+#define S_MC_WR_LIMIT               48
+#define M_MC_WR_LIMIT               _SB_MAKEMASK(4, S_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT(x)            _SB_MAKEVALUE(x, S_MC_WR_LIMIT)
+#define G_MC_WR_LIMIT(x)            _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT_DEFAULT       V_MC_WR_LIMIT(5)
+
+#define M_MC_IOB1HIGHPRIORITY	    _SB_MAKEMASK1(52)
+
+#define M_MC_RESERVED2              _SB_MAKEMASK(3, 53)
+
+#define S_MC_CS_MODE                56
+#define M_MC_CS_MODE                _SB_MAKEMASK(4, S_MC_CS_MODE)
+#define V_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_MC_CS_MODE)
+#define G_MC_CS_MODE(x)             _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE)
+
+#define K_MC_CS_MODE_MSB_CS         0
+#define K_MC_CS_MODE_INTLV_CS       15
+#define K_MC_CS_MODE_MIXED_CS_10    12
+#define K_MC_CS_MODE_MIXED_CS_30    6
+#define K_MC_CS_MODE_MIXED_CS_32    3
+
+#define V_MC_CS_MODE_MSB_CS         V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
+#define V_MC_CS_MODE_INTLV_CS       V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
+#define V_MC_CS_MODE_MIXED_CS_10    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10)
+#define V_MC_CS_MODE_MIXED_CS_30    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30)
+#define V_MC_CS_MODE_MIXED_CS_32    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32)
+
+#define M_MC_ECC_DISABLE            _SB_MAKEMASK1(60)
+#define M_MC_BERR_DISABLE           _SB_MAKEMASK1(61)
+#define M_MC_FORCE_SEQ              _SB_MAKEMASK1(62)
+#define M_MC_DEBUG                  _SB_MAKEMASK1(63)
+
+#define V_MC_CONFIG_DEFAULT     V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
+				V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \
+				V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \
+                                M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
+
+
+/*
+ * Memory clock config register (Table 6-15)
+ *
+ * Note: this field has been updated to be consistent with the errata to 0.2
+ */
+
+#define S_MC_CLK_RATIO              0
+#define M_MC_CLK_RATIO              _SB_MAKEMASK(4, S_MC_CLK_RATIO)
+#define V_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_MC_CLK_RATIO)
+#define G_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO)
+
+#define K_MC_CLK_RATIO_2X           4
+#define K_MC_CLK_RATIO_25X          5
+#define K_MC_CLK_RATIO_3X           6
+#define K_MC_CLK_RATIO_35X          7
+#define K_MC_CLK_RATIO_4X           8
+#define K_MC_CLK_RATIO_45X	    9
+
+#define V_MC_CLK_RATIO_2X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X)
+#define V_MC_CLK_RATIO_25X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
+#define V_MC_CLK_RATIO_3X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
+#define V_MC_CLK_RATIO_35X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
+#define V_MC_CLK_RATIO_4X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
+#define V_MC_CLK_RATIO_45X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
+#define V_MC_CLK_RATIO_DEFAULT      V_MC_CLK_RATIO_25X
+
+#define S_MC_REF_RATE                8
+#define M_MC_REF_RATE                _SB_MAKEMASK(8, S_MC_REF_RATE)
+#define V_MC_REF_RATE(x)             _SB_MAKEVALUE(x, S_MC_REF_RATE)
+#define G_MC_REF_RATE(x)             _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE)
+
+#define K_MC_REF_RATE_100MHz         0x62
+#define K_MC_REF_RATE_133MHz         0x81
+#define K_MC_REF_RATE_200MHz         0xC4
+
+#define V_MC_REF_RATE_100MHz         V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
+#define V_MC_REF_RATE_133MHz         V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
+#define V_MC_REF_RATE_200MHz         V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
+#define V_MC_REF_RATE_DEFAULT        V_MC_REF_RATE_100MHz
+
+#define S_MC_CLOCK_DRIVE             16
+#define M_MC_CLOCK_DRIVE             _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE(x)          _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE)
+#define G_MC_CLOCK_DRIVE(x)          _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE_DEFAULT     V_MC_CLOCK_DRIVE(0xF)
+
+#define S_MC_DATA_DRIVE              20
+#define M_MC_DATA_DRIVE              _SB_MAKEMASK(4, S_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_DATA_DRIVE)
+#define G_MC_DATA_DRIVE(x)           _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE_DEFAULT      V_MC_DATA_DRIVE(0x0)
+
+#define S_MC_ADDR_DRIVE              24
+#define M_MC_ADDR_DRIVE              _SB_MAKEMASK(4, S_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE)
+#define G_MC_ADDR_DRIVE(x)           _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE_DEFAULT      V_MC_ADDR_DRIVE(0x0)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_REF_DISABLE             _SB_MAKEMASK1(30)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_MC_DLL_BYPASS              _SB_MAKEMASK1(31)
+
+#define S_MC_DQI_SKEW               32
+#define M_MC_DQI_SKEW               _SB_MAKEMASK(8, S_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQI_SKEW)
+#define G_MC_DQI_SKEW(x)            _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW_DEFAULT       V_MC_DQI_SKEW(0)
+
+#define S_MC_DQO_SKEW               40
+#define M_MC_DQO_SKEW               _SB_MAKEMASK(8, S_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQO_SKEW)
+#define G_MC_DQO_SKEW(x)            _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW_DEFAULT       V_MC_DQO_SKEW(0)
+
+#define S_MC_ADDR_SKEW               48
+#define M_MC_ADDR_SKEW               _SB_MAKEMASK(8, S_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW(x)            _SB_MAKEVALUE(x, S_MC_ADDR_SKEW)
+#define G_MC_ADDR_SKEW(x)            _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW_DEFAULT       V_MC_ADDR_SKEW(0x0F)
+
+#define S_MC_DLL_DEFAULT             56
+#define M_MC_DLL_DEFAULT             _SB_MAKEMASK(8, S_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT(x)          _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT)
+#define G_MC_DLL_DEFAULT(x)          _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT_DEFAULT     V_MC_DLL_DEFAULT(0x10)
+
+#define V_MC_CLKCONFIG_DEFAULT       V_MC_DLL_DEFAULT_DEFAULT |  \
+                                     V_MC_ADDR_SKEW_DEFAULT | \
+                                     V_MC_DQO_SKEW_DEFAULT | \
+                                     V_MC_DQI_SKEW_DEFAULT | \
+                                     V_MC_ADDR_DRIVE_DEFAULT | \
+                                     V_MC_DATA_DRIVE_DEFAULT | \
+                                     V_MC_CLOCK_DRIVE_DEFAULT | \
+                                     V_MC_REF_RATE_DEFAULT
+
+
+
+/*
+ * DRAM Command Register (Table 6-13)
+ */
+
+#define S_MC_COMMAND                0
+#define M_MC_COMMAND                _SB_MAKEMASK(4, S_MC_COMMAND)
+#define V_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_MC_COMMAND)
+#define G_MC_COMMAND(x)             _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND)
+
+#define K_MC_COMMAND_EMRS           0
+#define K_MC_COMMAND_MRS            1
+#define K_MC_COMMAND_PRE            2
+#define K_MC_COMMAND_AR             3
+#define K_MC_COMMAND_SETRFSH        4
+#define K_MC_COMMAND_CLRRFSH        5
+#define K_MC_COMMAND_SETPWRDN       6
+#define K_MC_COMMAND_CLRPWRDN       7
+
+#define V_MC_COMMAND_EMRS           V_MC_COMMAND(K_MC_COMMAND_EMRS)
+#define V_MC_COMMAND_MRS            V_MC_COMMAND(K_MC_COMMAND_MRS)
+#define V_MC_COMMAND_PRE            V_MC_COMMAND(K_MC_COMMAND_PRE)
+#define V_MC_COMMAND_AR             V_MC_COMMAND(K_MC_COMMAND_AR)
+#define V_MC_COMMAND_SETRFSH        V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
+#define V_MC_COMMAND_CLRRFSH        V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
+#define V_MC_COMMAND_SETPWRDN       V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
+#define V_MC_COMMAND_CLRPWRDN       V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
+
+#define M_MC_CS0                    _SB_MAKEMASK1(4)
+#define M_MC_CS1                    _SB_MAKEMASK1(5)
+#define M_MC_CS2                    _SB_MAKEMASK1(6)
+#define M_MC_CS3                    _SB_MAKEMASK1(7)
+
+/*
+ * DRAM Mode Register (Table 6-14)
+ */
+
+#define S_MC_EMODE                  0
+#define M_MC_EMODE                  _SB_MAKEMASK(15, S_MC_EMODE)
+#define V_MC_EMODE(x)               _SB_MAKEVALUE(x, S_MC_EMODE)
+#define G_MC_EMODE(x)               _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE)
+#define V_MC_EMODE_DEFAULT          V_MC_EMODE(0)
+
+#define S_MC_MODE                   16
+#define M_MC_MODE                   _SB_MAKEMASK(15, S_MC_MODE)
+#define V_MC_MODE(x)                _SB_MAKEVALUE(x, S_MC_MODE)
+#define G_MC_MODE(x)                _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE)
+#define V_MC_MODE_DEFAULT           V_MC_MODE(0x22)
+
+#define S_MC_DRAM_TYPE              32
+#define M_MC_DRAM_TYPE              _SB_MAKEMASK(3, S_MC_DRAM_TYPE)
+#define V_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_MC_DRAM_TYPE)
+#define G_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE)
+
+#define K_MC_DRAM_TYPE_JEDEC        0
+#define K_MC_DRAM_TYPE_FCRAM        1
+#define K_MC_DRAM_TYPE_SGRAM	    2
+
+#define V_MC_DRAM_TYPE_JEDEC        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
+#define V_MC_DRAM_TYPE_FCRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
+#define V_MC_DRAM_TYPE_SGRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
+
+#define M_MC_EXTERNALDECODE	    _SB_MAKEMASK1(35)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+
+/*
+ * SDRAM Timing Register  (Table 6-15)
+ */
+
+#define M_MC_w2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(60)
+#define M_MC_r2wIDLE_TWOCYCLES	  _SB_MAKEMASK1(61)
+#define M_MC_r2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(62)
+
+#define S_MC_tFIFO                56
+#define M_MC_tFIFO                _SB_MAKEMASK(4, S_MC_tFIFO)
+#define V_MC_tFIFO(x)             _SB_MAKEVALUE(x, S_MC_tFIFO)
+#define G_MC_tFIFO(x)             _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO)
+#define K_MC_tFIFO_DEFAULT        1
+#define V_MC_tFIFO_DEFAULT        V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
+
+#define S_MC_tRFC                 52
+#define M_MC_tRFC                 _SB_MAKEMASK(4, S_MC_tRFC)
+#define V_MC_tRFC(x)              _SB_MAKEVALUE(x, S_MC_tRFC)
+#define G_MC_tRFC(x)              _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC)
+#define K_MC_tRFC_DEFAULT         12
+#define V_MC_tRFC_DEFAULT         V_MC_tRFC(K_MC_tRFC_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16          _SB_MAKEMASK1(51)	/* 1250C3 and later.  */
+#endif
+
+#define S_MC_tCwCr                40
+#define M_MC_tCwCr                _SB_MAKEMASK(4, S_MC_tCwCr)
+#define V_MC_tCwCr(x)             _SB_MAKEVALUE(x, S_MC_tCwCr)
+#define G_MC_tCwCr(x)             _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr)
+#define K_MC_tCwCr_DEFAULT        4
+#define V_MC_tCwCr_DEFAULT        V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
+
+#define S_MC_tRCr                 28
+#define M_MC_tRCr                 _SB_MAKEMASK(4, S_MC_tRCr)
+#define V_MC_tRCr(x)              _SB_MAKEVALUE(x, S_MC_tRCr)
+#define G_MC_tRCr(x)              _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr)
+#define K_MC_tRCr_DEFAULT         9
+#define V_MC_tRCr_DEFAULT         V_MC_tRCr(K_MC_tRCr_DEFAULT)
+
+#define S_MC_tRCw                 24
+#define M_MC_tRCw                 _SB_MAKEMASK(4, S_MC_tRCw)
+#define V_MC_tRCw(x)              _SB_MAKEVALUE(x, S_MC_tRCw)
+#define G_MC_tRCw(x)              _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw)
+#define K_MC_tRCw_DEFAULT         10
+#define V_MC_tRCw_DEFAULT         V_MC_tRCw(K_MC_tRCw_DEFAULT)
+
+#define S_MC_tRRD                 20
+#define M_MC_tRRD                 _SB_MAKEMASK(4, S_MC_tRRD)
+#define V_MC_tRRD(x)              _SB_MAKEVALUE(x, S_MC_tRRD)
+#define G_MC_tRRD(x)              _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD)
+#define K_MC_tRRD_DEFAULT         2
+#define V_MC_tRRD_DEFAULT         V_MC_tRRD(K_MC_tRRD_DEFAULT)
+
+#define S_MC_tRP                  16
+#define M_MC_tRP                  _SB_MAKEMASK(4, S_MC_tRP)
+#define V_MC_tRP(x)               _SB_MAKEVALUE(x, S_MC_tRP)
+#define G_MC_tRP(x)               _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP)
+#define K_MC_tRP_DEFAULT          4
+#define V_MC_tRP_DEFAULT          V_MC_tRP(K_MC_tRP_DEFAULT)
+
+#define S_MC_tCwD                 8
+#define M_MC_tCwD                 _SB_MAKEMASK(4, S_MC_tCwD)
+#define V_MC_tCwD(x)              _SB_MAKEVALUE(x, S_MC_tCwD)
+#define G_MC_tCwD(x)              _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD)
+#define K_MC_tCwD_DEFAULT         1
+#define V_MC_tCwD_DEFAULT         V_MC_tCwD(K_MC_tCwD_DEFAULT)
+
+#define M_tCrDh                   _SB_MAKEMASK1(7)
+#define M_MC_tCrDh		  M_tCrDh
+
+#define S_MC_tCrD                 4
+#define M_MC_tCrD                 _SB_MAKEMASK(3, S_MC_tCrD)
+#define V_MC_tCrD(x)              _SB_MAKEVALUE(x, S_MC_tCrD)
+#define G_MC_tCrD(x)              _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD)
+#define K_MC_tCrD_DEFAULT         2
+#define V_MC_tCrD_DEFAULT         V_MC_tCrD(K_MC_tCrD_DEFAULT)
+
+#define S_MC_tRCD                 0
+#define M_MC_tRCD                 _SB_MAKEMASK(4, S_MC_tRCD)
+#define V_MC_tRCD(x)              _SB_MAKEVALUE(x, S_MC_tRCD)
+#define G_MC_tRCD(x)              _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD)
+#define K_MC_tRCD_DEFAULT         3
+#define V_MC_tRCD_DEFAULT         V_MC_tRCD(K_MC_tRCD_DEFAULT)
+
+#define V_MC_TIMING_DEFAULT     V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
+                                V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
+                                V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
+                                V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
+                                V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
+                                V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
+                                V_MC_tRP(K_MC_tRP_DEFAULT) | \
+                                V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
+                                V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
+                                V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
+                                M_MC_r2rIDLE_TWOCYCLES
+
+/*
+ * Errata says these are not the default
+ *                               M_MC_w2rIDLE_TWOCYCLES | \
+ *                               M_MC_r2wIDLE_TWOCYCLES | \
+ */
+
+
+/*
+ * Chip Select Start Address Register (Table 6-17)
+ */
+
+#define S_MC_CS0_START              0
+#define M_MC_CS0_START              _SB_MAKEMASK(16, S_MC_CS0_START)
+#define V_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_MC_CS0_START)
+#define G_MC_CS0_START(x)           _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START)
+
+#define S_MC_CS1_START              16
+#define M_MC_CS1_START              _SB_MAKEMASK(16, S_MC_CS1_START)
+#define V_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_MC_CS1_START)
+#define G_MC_CS1_START(x)           _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START)
+
+#define S_MC_CS2_START              32
+#define M_MC_CS2_START              _SB_MAKEMASK(16, S_MC_CS2_START)
+#define V_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_MC_CS2_START)
+#define G_MC_CS2_START(x)           _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START)
+
+#define S_MC_CS3_START              48
+#define M_MC_CS3_START              _SB_MAKEMASK(16, S_MC_CS3_START)
+#define V_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_MC_CS3_START)
+#define G_MC_CS3_START(x)           _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 6-18)
+ */
+
+#define S_MC_CS0_END                0
+#define M_MC_CS0_END                _SB_MAKEMASK(16, S_MC_CS0_END)
+#define V_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_MC_CS0_END)
+#define G_MC_CS0_END(x)             _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END)
+
+#define S_MC_CS1_END                16
+#define M_MC_CS1_END                _SB_MAKEMASK(16, S_MC_CS1_END)
+#define V_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_MC_CS1_END)
+#define G_MC_CS1_END(x)             _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END)
+
+#define S_MC_CS2_END                32
+#define M_MC_CS2_END                _SB_MAKEMASK(16, S_MC_CS2_END)
+#define V_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_MC_CS2_END)
+#define G_MC_CS2_END(x)             _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END)
+
+#define S_MC_CS3_END                48
+#define M_MC_CS3_END                _SB_MAKEMASK(16, S_MC_CS3_END)
+#define V_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_MC_CS3_END)
+#define G_MC_CS3_END(x)             _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END)
+
+/*
+ * Chip Select Interleave Register (Table 6-19)
+ */
+
+#define S_MC_INTLV_RESERVED         0
+#define M_MC_INTLV_RESERVED         _SB_MAKEMASK(5, S_MC_INTLV_RESERVED)
+
+#define S_MC_INTERLEAVE             7
+#define M_MC_INTERLEAVE             _SB_MAKEMASK(18, S_MC_INTERLEAVE)
+#define V_MC_INTERLEAVE(x)          _SB_MAKEVALUE(x, S_MC_INTERLEAVE)
+
+#define S_MC_INTLV_MBZ              25
+#define M_MC_INTLV_MBZ              _SB_MAKEMASK(39, S_MC_INTLV_MBZ)
+
+/*
+ * Row Address Bits Register (Table 6-20)
+ */
+
+#define S_MC_RAS_RESERVED           0
+#define M_MC_RAS_RESERVED           _SB_MAKEMASK(5, S_MC_RAS_RESERVED)
+
+#define S_MC_RAS_SELECT             12
+#define M_MC_RAS_SELECT             _SB_MAKEMASK(25, S_MC_RAS_SELECT)
+#define V_MC_RAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_RAS_SELECT)
+
+#define S_MC_RAS_MBZ                37
+#define M_MC_RAS_MBZ                _SB_MAKEMASK(27, S_MC_RAS_MBZ)
+
+
+/*
+ * Column Address Bits Register (Table 6-21)
+ */
+
+#define S_MC_CAS_RESERVED           0
+#define M_MC_CAS_RESERVED           _SB_MAKEMASK(5, S_MC_CAS_RESERVED)
+
+#define S_MC_CAS_SELECT             5
+#define M_MC_CAS_SELECT             _SB_MAKEMASK(18, S_MC_CAS_SELECT)
+#define V_MC_CAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_CAS_SELECT)
+
+#define S_MC_CAS_MBZ                23
+#define M_MC_CAS_MBZ                _SB_MAKEMASK(41, S_MC_CAS_MBZ)
+
+
+/*
+ * Bank Address Address Bits Register (Table 6-22)
+ */
+
+#define S_MC_BA_RESERVED            0
+#define M_MC_BA_RESERVED            _SB_MAKEMASK(5, S_MC_BA_RESERVED)
+
+#define S_MC_BA_SELECT              5
+#define M_MC_BA_SELECT              _SB_MAKEMASK(20, S_MC_BA_SELECT)
+#define V_MC_BA_SELECT(x)           _SB_MAKEVALUE(x, S_MC_BA_SELECT)
+
+#define S_MC_BA_MBZ                 25
+#define M_MC_BA_MBZ                 _SB_MAKEMASK(39, S_MC_BA_MBZ)
+
+/*
+ * Chip Select Attribute Register (Table 6-23)
+ */
+
+#define K_MC_CS_ATTR_CLOSED         0
+#define K_MC_CS_ATTR_CASCHECK       1
+#define K_MC_CS_ATTR_HINT           2
+#define K_MC_CS_ATTR_OPEN           3
+
+#define S_MC_CS0_PAGE               0
+#define M_MC_CS0_PAGE               _SB_MAKEMASK(2, S_MC_CS0_PAGE)
+#define V_MC_CS0_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS0_PAGE)
+#define G_MC_CS0_PAGE(x)            _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE)
+
+#define S_MC_CS1_PAGE               16
+#define M_MC_CS1_PAGE               _SB_MAKEMASK(2, S_MC_CS1_PAGE)
+#define V_MC_CS1_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS1_PAGE)
+#define G_MC_CS1_PAGE(x)            _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE)
+
+#define S_MC_CS2_PAGE               32
+#define M_MC_CS2_PAGE               _SB_MAKEMASK(2, S_MC_CS2_PAGE)
+#define V_MC_CS2_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS2_PAGE)
+#define G_MC_CS2_PAGE(x)            _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE)
+
+#define S_MC_CS3_PAGE               48
+#define M_MC_CS3_PAGE               _SB_MAKEMASK(2, S_MC_CS3_PAGE)
+#define V_MC_CS3_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS3_PAGE)
+#define G_MC_CS3_PAGE(x)            _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE)
+
+/*
+ * ECC Test ECC Register (Table 6-25)
+ */
+
+#define S_MC_ECC_INVERT             0
+#define M_MC_ECC_INVERT             _SB_MAKEMASK(8, S_MC_ECC_INVERT)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h
new file mode 100644
index 0000000..8f53ec8
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_regs.h
@@ -0,0 +1,893 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Register Definitions                     File: sb1250_regs.h
+    *
+    *  This module contains the addresses of the on-chip peripherals
+    *  on the SB1250.
+    *
+    *  SB1250 specification level:  01/02/2002
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_REGS_H
+#define _SB1250_REGS_H
+
+#include "sb1250_defs.h"
+
+
+/*  *********************************************************************
+    *  Some general notes:
+    *
+    *  For the most part, when there is more than one peripheral
+    *  of the same type on the SOC, the constants below will be
+    *  offsets from the base of each peripheral.  For example,
+    *  the MAC registers are described as offsets from the first
+    *  MAC register, and there will be a MAC_REGISTER() macro
+    *  to calculate the base address of a given MAC.
+    *
+    *  The information in this file is based on the SB1250 SOC
+    *  manual version 0.2, July 2000.
+    ********************************************************************* */
+
+
+/*  *********************************************************************
+    * Memory Controller Registers
+    ********************************************************************* */
+
+/*
+ * XXX: can't remove MC base 0 if 112x, since it's used by other macros,
+ * since there is one reg there (but it could get its addr/offset constant).
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x		/* This MC only on 1250 & 112x */
+#define A_MC_BASE_0                 0x0010051000
+#define A_MC_BASE_1                 0x0010052000
+#define MC_REGISTER_SPACING         0x1000
+
+#define A_MC_BASE(ctlid)            ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_REGISTER(ctlid, reg)    (A_MC_BASE(ctlid)+(reg))
+
+#define R_MC_CONFIG                 0x0000000100
+#define R_MC_DRAMCMD                0x0000000120
+#define R_MC_DRAMMODE               0x0000000140
+#define R_MC_TIMING1                0x0000000160
+#define R_MC_TIMING2                0x0000000180
+#define R_MC_CS_START               0x00000001A0
+#define R_MC_CS_END                 0x00000001C0
+#define R_MC_CS_INTERLEAVE          0x00000001E0
+#define S_MC_CS_STARTEND            16
+
+#define R_MC_CSX_BASE               0x0000000200
+#define R_MC_CSX_ROW                0x0000000000	/* relative to CSX_BASE, above */
+#define R_MC_CSX_COL                0x0000000020	/* relative to CSX_BASE, above */
+#define R_MC_CSX_BA                 0x0000000040	/* relative to CSX_BASE, above */
+#define MC_CSX_SPACING              0x0000000060	/* relative to CSX_BASE, above */
+
+#define R_MC_CS0_ROW                0x0000000200
+#define R_MC_CS0_COL                0x0000000220
+#define R_MC_CS0_BA                 0x0000000240
+#define R_MC_CS1_ROW                0x0000000260
+#define R_MC_CS1_COL                0x0000000280
+#define R_MC_CS1_BA                 0x00000002A0
+#define R_MC_CS2_ROW                0x00000002C0
+#define R_MC_CS2_COL                0x00000002E0
+#define R_MC_CS2_BA                 0x0000000300
+#define R_MC_CS3_ROW                0x0000000320
+#define R_MC_CS3_COL                0x0000000340
+#define R_MC_CS3_BA                 0x0000000360
+#define R_MC_CS_ATTR                0x0000000380
+#define R_MC_TEST_DATA              0x0000000400
+#define R_MC_TEST_ECC               0x0000000420
+#define R_MC_MCLK_CFG               0x0000000500
+
+#endif	/* 1250 & 112x */
+
+/*  *********************************************************************
+    * L2 Cache Control Registers
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* This L2C only on 1250/112x */
+
+#define A_L2_READ_TAG               0x0010040018
+#define A_L2_ECC_TAG                0x0010040038
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_READ_MISC              0x0010040058
+#endif /* 1250 PASS3 || 112x PASS1 */
+#define A_L2_WAY_DISABLE            0x0010041000
+#define A_L2_MAKEDISABLE(x)         (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE          0x00D0000000
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_CACHE_DISABLE	   0x0010042000
+#define A_L2_MAKECACHEDISABLE(x)   (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8))
+#define A_L2_MISC_CONFIG	   0x0010043000
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/* Backward-compatibility definitions.  */
+/* XXX: discourage people from using these constants.  */
+#define A_L2_READ_ADDRESS           A_L2_READ_TAG
+#define A_L2_EEC_ADDRESS            A_L2_ECC_TAG
+
+#endif
+
+
+/*  *********************************************************************
+    * PCI Interface Registers
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* This PCI/HT only on 1250/112x */
+#define A_PCI_TYPE00_HEADER         0x00DE000000
+#define A_PCI_TYPE01_HEADER         0x00DE000800
+#endif
+
+
+/*  *********************************************************************
+    * Ethernet DMA and MACs
+    ********************************************************************* */
+
+#define A_MAC_BASE_0                0x0010064000
+#define A_MAC_BASE_1                0x0010065000
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+#define A_MAC_BASE_2                0x0010066000
+#endif /* 1250 */
+
+#define MAC_SPACING                 0x1000
+#define MAC_DMA_TXRX_SPACING        0x0400
+#define MAC_DMA_CHANNEL_SPACING     0x0100
+#define DMA_RX                      0
+#define DMA_TX                      1
+#define MAC_NUM_DMACHAN		    2		    /* channels per direction */
+
+/* XXX: not correct; depends on SOC type.  */
+#define MAC_NUM_PORTS               3
+
+#define A_MAC_CHANNEL_BASE(macnum)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum))
+
+#define A_MAC_REGISTER(macnum,reg)                  \
+            (A_MAC_BASE_0 +                         \
+             MAC_SPACING*(macnum) + (reg))
+
+
+#define R_MAC_DMA_CHANNELS		0x800 /* Relative to A_MAC_CHANNEL_BASE */
+
+#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan)  \
+             ((A_MAC_CHANNEL_BASE(macnum)) +        \
+             R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define R_MAC_DMA_CHANNEL_BASE(txrx, chan)		\
+             (R_MAC_DMA_CHANNELS +                   \
+             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
+             (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg)           \
+            (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) +    \
+            (reg))
+
+#define R_MAC_DMA_REGISTER(txrx, chan, reg)           \
+            (R_MAC_DMA_CHANNEL_BASE(txrx, chan) +    \
+            (reg))
+
+/*
+ * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
+ */
+
+#define R_MAC_DMA_CONFIG0               0x00000000
+#define R_MAC_DMA_CONFIG1               0x00000008
+#define R_MAC_DMA_DSCR_BASE             0x00000010
+#define R_MAC_DMA_DSCR_CNT              0x00000018
+#define R_MAC_DMA_CUR_DSCRA             0x00000020
+#define R_MAC_DMA_CUR_DSCRB             0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR          0x00000030
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_DMA_OODPKTLOST_RX         0x00000038	/* rx only */
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * RMON Counters
+ */
+
+#define R_MAC_RMON_TX_BYTES             0x00000000
+#define R_MAC_RMON_COLLISIONS           0x00000008
+#define R_MAC_RMON_LATE_COL             0x00000010
+#define R_MAC_RMON_EX_COL               0x00000018
+#define R_MAC_RMON_FCS_ERROR            0x00000020
+#define R_MAC_RMON_TX_ABORT             0x00000028
+/* Counter #6 (0x30) now reserved */
+#define R_MAC_RMON_TX_BAD               0x00000038
+#define R_MAC_RMON_TX_GOOD              0x00000040
+#define R_MAC_RMON_TX_RUNT              0x00000048
+#define R_MAC_RMON_TX_OVERSIZE          0x00000050
+#define R_MAC_RMON_RX_BYTES             0x00000080
+#define R_MAC_RMON_RX_MCAST             0x00000088
+#define R_MAC_RMON_RX_BCAST             0x00000090
+#define R_MAC_RMON_RX_BAD               0x00000098
+#define R_MAC_RMON_RX_GOOD              0x000000A0
+#define R_MAC_RMON_RX_RUNT              0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE          0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR         0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR      0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR        0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR       0x000000D0
+
+/* Updated to spec 0.2 */
+#define R_MAC_CFG                       0x00000100
+#define R_MAC_THRSH_CFG                 0x00000108
+#define R_MAC_VLANTAG                   0x00000110
+#define R_MAC_FRAMECFG                  0x00000118
+#define R_MAC_EOPCNT                    0x00000120
+#define R_MAC_FIFO_PTRS                 0x00000128
+#define R_MAC_ADFILTER_CFG              0x00000200
+#define R_MAC_ETHERNET_ADDR             0x00000208
+#define R_MAC_PKT_TYPE                  0x00000210
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_ADMASK0			0x00000218
+#define R_MAC_ADMASK1			0x00000220
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+#define R_MAC_HASH_BASE                 0x00000240
+#define R_MAC_ADDR_BASE                 0x00000280
+#define R_MAC_CHLO0_BASE                0x00000300
+#define R_MAC_CHUP0_BASE                0x00000320
+#define R_MAC_ENABLE                    0x00000400
+#define R_MAC_STATUS                    0x00000408
+#define R_MAC_INT_MASK                  0x00000410
+#define R_MAC_TXD_CTL                   0x00000420
+#define R_MAC_MDIO                      0x00000428
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_STATUS1		        0x00000430
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define R_MAC_DEBUG_STATUS              0x00000448
+
+#define MAC_HASH_COUNT			8
+#define MAC_ADDR_COUNT			8
+#define MAC_CHMAP_COUNT			4
+
+
+/*  *********************************************************************
+    * DUART Registers
+    ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
+#define R_DUART_NUM_PORTS           2
+
+#define A_DUART                     0x0010060000
+
+#define DUART_CHANREG_SPACING       0x100
+
+#define A_DUART_CHANREG(chan, reg)					\
+	(A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg))
+#endif	/* 1250 & 112x */
+
+#define R_DUART_MODE_REG_1	    0x000
+#define R_DUART_MODE_REG_2	    0x010
+#define R_DUART_STATUS		    0x020
+#define R_DUART_CLK_SEL		    0x030
+#define R_DUART_CMD		    0x050
+#define R_DUART_RX_HOLD		    0x060
+#define R_DUART_TX_HOLD		    0x070
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_DUART_FULL_CTL	    0x040
+#define R_DUART_OPCR_X		    0x080
+#define R_DUART_AUXCTL_X	    0x090
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * The IMR and ISR can't be addressed with A_DUART_CHANREG,
+ * so use these macros instead.
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
+#define DUART_IMRISR_SPACING	    0x20
+#define DUART_INCHNG_SPACING	    0x10
+
+#define A_DUART_CTRLREG(reg)						\
+	(A_DUART + DUART_CHANREG_SPACING * 3 + (reg))
+
+#define R_DUART_IMRREG(chan)						\
+	(R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan)						\
+	(R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_INCHREG(chan)						\
+	(R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING)
+
+#define A_DUART_IMRREG(chan)	    A_DUART_CTRLREG(R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan)	    A_DUART_CTRLREG(R_DUART_ISRREG(chan))
+#define A_DUART_INCHREG(chan)	    A_DUART_CTRLREG(R_DUART_INCHREG(chan))
+#endif	/* 1250 & 112x */
+
+#define R_DUART_AUX_CTRL	    0x010
+#define R_DUART_ISR_A		    0x020
+#define R_DUART_IMR_A		    0x030
+#define R_DUART_ISR_B		    0x040
+#define R_DUART_IMR_B		    0x050
+#define R_DUART_OUT_PORT	    0x060
+#define R_DUART_OPCR		    0x070
+#define R_DUART_IN_PORT		    0x080
+
+#define R_DUART_SET_OPR		    0x0B0
+#define R_DUART_CLEAR_OPR	    0x0C0
+#define R_DUART_IN_CHNG_A	    0x0D0
+#define R_DUART_IN_CHNG_B	    0x0E0
+
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_DUART_MODE_REG_1_A        0x0010060100
+#define A_DUART_MODE_REG_2_A        0x0010060110
+#define A_DUART_STATUS_A            0x0010060120
+#define A_DUART_CLK_SEL_A           0x0010060130
+#define A_DUART_CMD_A               0x0010060150
+#define A_DUART_RX_HOLD_A           0x0010060160
+#define A_DUART_TX_HOLD_A           0x0010060170
+
+#define A_DUART_MODE_REG_1_B        0x0010060200
+#define A_DUART_MODE_REG_2_B        0x0010060210
+#define A_DUART_STATUS_B            0x0010060220
+#define A_DUART_CLK_SEL_B           0x0010060230
+#define A_DUART_CMD_B               0x0010060250
+#define A_DUART_RX_HOLD_B           0x0010060260
+#define A_DUART_TX_HOLD_B           0x0010060270
+
+#define A_DUART_INPORT_CHNG         0x0010060300
+#define A_DUART_AUX_CTRL            0x0010060310
+#define A_DUART_ISR_A               0x0010060320
+#define A_DUART_IMR_A               0x0010060330
+#define A_DUART_ISR_B               0x0010060340
+#define A_DUART_IMR_B               0x0010060350
+#define A_DUART_OUT_PORT            0x0010060360
+#define A_DUART_OPCR                0x0010060370
+#define A_DUART_IN_PORT             0x0010060380
+#define A_DUART_ISR                 0x0010060390
+#define A_DUART_IMR                 0x00100603A0
+#define A_DUART_SET_OPR             0x00100603B0
+#define A_DUART_CLEAR_OPR           0x00100603C0
+#define A_DUART_INPORT_CHNG_A       0x00100603D0
+#define A_DUART_INPORT_CHNG_B       0x00100603E0
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DUART_FULL_CTL_A	    0x0010060140
+#define A_DUART_FULL_CTL_B	    0x0010060240
+
+#define A_DUART_OPCR_A	  	    0x0010060180
+#define A_DUART_OPCR_B	  	    0x0010060280
+
+#define A_DUART_INPORT_CHNG_DEBUG   0x00100603F0
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/*  *********************************************************************
+    * Synchronous Serial Registers
+    ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x	/* sync serial only on 1250/112x */
+
+#define A_SER_BASE_0                0x0010060400
+#define A_SER_BASE_1                0x0010060800
+#define SER_SPACING                 0x400
+
+#define SER_DMA_TXRX_SPACING        0x80
+
+#define SER_NUM_PORTS               2
+
+#define A_SER_CHANNEL_BASE(sernum)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum))
+
+#define A_SER_REGISTER(sernum,reg)                  \
+            (A_SER_BASE_0 +                         \
+             SER_SPACING*(sernum) + (reg))
+
+
+#define R_SER_DMA_CHANNELS		0   /* Relative to A_SER_BASE_x */
+
+#define A_SER_DMA_CHANNEL_BASE(sernum,txrx)    \
+             ((A_SER_CHANNEL_BASE(sernum)) +        \
+             R_SER_DMA_CHANNELS +                   \
+             (SER_DMA_TXRX_SPACING*(txrx)))
+
+#define A_SER_DMA_REGISTER(sernum, txrx, reg)           \
+            (A_SER_DMA_CHANNEL_BASE(sernum, txrx) +    \
+            (reg))
+
+
+/*
+ * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
+ */
+
+#define R_SER_DMA_CONFIG0           0x00000000
+#define R_SER_DMA_CONFIG1           0x00000008
+#define R_SER_DMA_DSCR_BASE         0x00000010
+#define R_SER_DMA_DSCR_CNT          0x00000018
+#define R_SER_DMA_CUR_DSCRA         0x00000020
+#define R_SER_DMA_CUR_DSCRB         0x00000028
+#define R_SER_DMA_CUR_DSCRADDR      0x00000030
+
+#define R_SER_DMA_CONFIG0_RX        0x00000000
+#define R_SER_DMA_CONFIG1_RX        0x00000008
+#define R_SER_DMA_DSCR_BASE_RX      0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX     0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX     0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX     0x00000028
+#define R_SER_DMA_CUR_DSCR_ADDR_RX  0x00000030
+
+#define R_SER_DMA_CONFIG0_TX        0x00000080
+#define R_SER_DMA_CONFIG1_TX        0x00000088
+#define R_SER_DMA_DSCR_BASE_TX      0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX     0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX     0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX     0x000000A8
+#define R_SER_DMA_CUR_DSCR_ADDR_TX  0x000000B0
+
+#define R_SER_MODE                  0x00000100
+#define R_SER_MINFRM_SZ             0x00000108
+#define R_SER_MAXFRM_SZ             0x00000110
+#define R_SER_ADDR                  0x00000118
+#define R_SER_USR0_ADDR             0x00000120
+#define R_SER_USR1_ADDR             0x00000128
+#define R_SER_USR2_ADDR             0x00000130
+#define R_SER_USR3_ADDR             0x00000138
+#define R_SER_CMD                   0x00000140
+#define R_SER_TX_RD_THRSH           0x00000160
+#define R_SER_TX_WR_THRSH           0x00000168
+#define R_SER_RX_RD_THRSH           0x00000170
+#define R_SER_LINE_MODE		    0x00000178
+#define R_SER_DMA_ENABLE            0x00000180
+#define R_SER_INT_MASK              0x00000190
+#define R_SER_STATUS                0x00000188
+#define R_SER_STATUS_DEBUG          0x000001A8
+#define R_SER_RX_TABLE_BASE         0x00000200
+#define SER_RX_TABLE_COUNT          16
+#define R_SER_TX_TABLE_BASE         0x00000300
+#define SER_TX_TABLE_COUNT          16
+
+/* RMON Counters */
+#define R_SER_RMON_TX_BYTE_LO       0x000001C0
+#define R_SER_RMON_TX_BYTE_HI       0x000001C8
+#define R_SER_RMON_RX_BYTE_LO       0x000001D0
+#define R_SER_RMON_RX_BYTE_HI       0x000001D8
+#define R_SER_RMON_TX_UNDERRUN      0x000001E0
+#define R_SER_RMON_RX_OVERFLOW      0x000001E8
+#define R_SER_RMON_RX_ERRORS        0x000001F0
+#define R_SER_RMON_RX_BADADDR       0x000001F8
+
+#endif	/* 1250/112x */
+
+/*  *********************************************************************
+    * Generic Bus Registers
+    ********************************************************************* */
+
+#define IO_EXT_CFG_COUNT            8
+
+#define A_IO_EXT_BASE		    0x0010061000
+#define A_IO_EXT_REG(r)		    (A_IO_EXT_BASE + (r))
+
+#define A_IO_EXT_CFG_BASE           0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE     0x0010061100
+#define A_IO_EXT_START_ADDR_BASE    0x0010061200
+#define A_IO_EXT_TIME_CFG0_BASE     0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE     0x0010061700
+
+#define IO_EXT_REGISTER_SPACING	    8
+#define A_IO_EXT_CS_BASE(cs)	    (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
+#define R_IO_EXT_REG(reg, cs)	    ((cs)*IO_EXT_REGISTER_SPACING + (reg))
+
+#define R_IO_EXT_CFG		    0x0000
+#define R_IO_EXT_MULT_SIZE          0x0100
+#define R_IO_EXT_START_ADDR	    0x0200
+#define R_IO_EXT_TIME_CFG0          0x0600
+#define R_IO_EXT_TIME_CFG1          0x0700
+
+
+#define A_IO_INTERRUPT_STATUS       0x0010061A00
+#define A_IO_INTERRUPT_DATA0        0x0010061A10
+#define A_IO_INTERRUPT_DATA1        0x0010061A18
+#define A_IO_INTERRUPT_DATA2        0x0010061A20
+#define A_IO_INTERRUPT_DATA3        0x0010061A28
+#define A_IO_INTERRUPT_ADDR0        0x0010061A30
+#define A_IO_INTERRUPT_ADDR1        0x0010061A40
+#define A_IO_INTERRUPT_PARITY       0x0010061A50
+#define A_IO_PCMCIA_CFG             0x0010061A60
+#define A_IO_PCMCIA_STATUS          0x0010061A70
+#define A_IO_DRIVE_0		    0x0010061300
+#define A_IO_DRIVE_1		    0x0010061308
+#define A_IO_DRIVE_2		    0x0010061310
+#define A_IO_DRIVE_3		    0x0010061318
+#define A_IO_DRIVE_BASE		    A_IO_DRIVE_0
+#define IO_DRIVE_REGISTER_SPACING   8
+#define R_IO_DRIVE(x)		    ((x)*IO_DRIVE_REGISTER_SPACING)
+#define A_IO_DRIVE(x)		    (A_IO_DRIVE_BASE + R_IO_DRIVE(x))
+
+#define R_IO_INTERRUPT_STATUS       0x0A00
+#define R_IO_INTERRUPT_DATA0        0x0A10
+#define R_IO_INTERRUPT_DATA1        0x0A18
+#define R_IO_INTERRUPT_DATA2        0x0A20
+#define R_IO_INTERRUPT_DATA3        0x0A28
+#define R_IO_INTERRUPT_ADDR0        0x0A30
+#define R_IO_INTERRUPT_ADDR1        0x0A40
+#define R_IO_INTERRUPT_PARITY       0x0A50
+#define R_IO_PCMCIA_CFG             0x0A60
+#define R_IO_PCMCIA_STATUS          0x0A70
+
+/*  *********************************************************************
+    * GPIO Registers
+    ********************************************************************* */
+
+#define A_GPIO_CLR_EDGE             0x0010061A80
+#define A_GPIO_INT_TYPE             0x0010061A88
+#define A_GPIO_INPUT_INVERT         0x0010061A90
+#define A_GPIO_GLITCH               0x0010061A98
+#define A_GPIO_READ                 0x0010061AA0
+#define A_GPIO_DIRECTION            0x0010061AA8
+#define A_GPIO_PIN_CLR              0x0010061AB0
+#define A_GPIO_PIN_SET              0x0010061AB8
+
+#define A_GPIO_BASE		    0x0010061A80
+
+#define R_GPIO_CLR_EDGE             0x00
+#define R_GPIO_INT_TYPE             0x08
+#define R_GPIO_INPUT_INVERT         0x10
+#define R_GPIO_GLITCH               0x18
+#define R_GPIO_READ                 0x20
+#define R_GPIO_DIRECTION            0x28
+#define R_GPIO_PIN_CLR              0x30
+#define R_GPIO_PIN_SET              0x38
+
+/*  *********************************************************************
+    * SMBus Registers
+    ********************************************************************* */
+
+#define A_SMB_XTRA_0                0x0010060000
+#define A_SMB_XTRA_1                0x0010060008
+#define A_SMB_FREQ_0                0x0010060010
+#define A_SMB_FREQ_1                0x0010060018
+#define A_SMB_STATUS_0              0x0010060020
+#define A_SMB_STATUS_1              0x0010060028
+#define A_SMB_CMD_0                 0x0010060030
+#define A_SMB_CMD_1                 0x0010060038
+#define A_SMB_START_0               0x0010060040
+#define A_SMB_START_1               0x0010060048
+#define A_SMB_DATA_0                0x0010060050
+#define A_SMB_DATA_1                0x0010060058
+#define A_SMB_CONTROL_0             0x0010060060
+#define A_SMB_CONTROL_1             0x0010060068
+#define A_SMB_PEC_0                 0x0010060070
+#define A_SMB_PEC_1                 0x0010060078
+
+#define A_SMB_0                     0x0010060000
+#define A_SMB_1                     0x0010060008
+#define SMB_REGISTER_SPACING        0x8
+#define A_SMB_BASE(idx)             (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_REGISTER(idx, reg)    (A_SMB_BASE(idx)+(reg))
+
+#define R_SMB_XTRA                  0x0000000000
+#define R_SMB_FREQ                  0x0000000010
+#define R_SMB_STATUS                0x0000000020
+#define R_SMB_CMD                   0x0000000030
+#define R_SMB_START                 0x0000000040
+#define R_SMB_DATA                  0x0000000050
+#define R_SMB_CONTROL               0x0000000060
+#define R_SMB_PEC                   0x0000000070
+
+/*  *********************************************************************
+    * Timer Registers
+    ********************************************************************* */
+
+/*
+ * Watchdog timers
+ */
+
+#define A_SCD_WDOG_0		    0x0010020050
+#define A_SCD_WDOG_1                0x0010020150
+#define SCD_WDOG_SPACING            0x100
+#define SCD_NUM_WDOGS		    2
+#define A_SCD_WDOG_BASE(w)          (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_REGISTER(w, r)   (A_SCD_WDOG_BASE(w) + (r))
+
+#define R_SCD_WDOG_INIT		    0x0000000000
+#define R_SCD_WDOG_CNT		    0x0000000008
+#define R_SCD_WDOG_CFG		    0x0000000010
+
+#define A_SCD_WDOG_INIT_0           0x0010020050
+#define A_SCD_WDOG_CNT_0            0x0010020058
+#define A_SCD_WDOG_CFG_0            0x0010020060
+
+#define A_SCD_WDOG_INIT_1           0x0010020150
+#define A_SCD_WDOG_CNT_1            0x0010020158
+#define A_SCD_WDOG_CFG_1            0x0010020160
+
+/*
+ * Generic timers
+ */
+
+#define A_SCD_TIMER_0		    0x0010020070
+#define A_SCD_TIMER_1               0x0010020078
+#define A_SCD_TIMER_2		    0x0010020170
+#define A_SCD_TIMER_3               0x0010020178
+#define SCD_NUM_TIMERS		    4
+#define A_SCD_TIMER_BASE(w)         (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_REGISTER(w, r)  (A_SCD_TIMER_BASE(w) + (r))
+
+#define R_SCD_TIMER_INIT	    0x0000000000
+#define R_SCD_TIMER_CNT		    0x0000000010
+#define R_SCD_TIMER_CFG		    0x0000000020
+
+#define A_SCD_TIMER_INIT_0          0x0010020070
+#define A_SCD_TIMER_CNT_0           0x0010020080
+#define A_SCD_TIMER_CFG_0           0x0010020090
+
+#define A_SCD_TIMER_INIT_1          0x0010020078
+#define A_SCD_TIMER_CNT_1           0x0010020088
+#define A_SCD_TIMER_CFG_1           0x0010020098
+
+#define A_SCD_TIMER_INIT_2          0x0010020170
+#define A_SCD_TIMER_CNT_2           0x0010020180
+#define A_SCD_TIMER_CFG_2           0x0010020190
+
+#define A_SCD_TIMER_INIT_3          0x0010020178
+#define A_SCD_TIMER_CNT_3           0x0010020188
+#define A_SCD_TIMER_CFG_3           0x0010020198
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_SCRATCH		   0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_SCD_ZBBUS_CYCLE_COUNT	   0x0010030000
+#define A_SCD_ZBBUS_CYCLE_CP0	   0x0010020C00
+#define A_SCD_ZBBUS_CYCLE_CP1	   0x0010020C08
+#endif
+
+/*  *********************************************************************
+    * System Control Registers
+    ********************************************************************* */
+
+#define A_SCD_SYSTEM_REVISION       0x0010020000
+#define A_SCD_SYSTEM_CFG            0x0010020008
+#define A_SCD_SYSTEM_MANUF          0x0010038000
+
+/*  *********************************************************************
+    * System Address Trap Registers
+    ********************************************************************* */
+
+#define A_ADDR_TRAP_INDEX           0x00100200B0
+#define A_ADDR_TRAP_REG             0x00100200B8
+#define A_ADDR_TRAP_UP_0            0x0010020400
+#define A_ADDR_TRAP_UP_1            0x0010020408
+#define A_ADDR_TRAP_UP_2            0x0010020410
+#define A_ADDR_TRAP_UP_3            0x0010020418
+#define A_ADDR_TRAP_DOWN_0          0x0010020420
+#define A_ADDR_TRAP_DOWN_1          0x0010020428
+#define A_ADDR_TRAP_DOWN_2          0x0010020430
+#define A_ADDR_TRAP_DOWN_3          0x0010020438
+#define A_ADDR_TRAP_CFG_0           0x0010020440
+#define A_ADDR_TRAP_CFG_1           0x0010020448
+#define A_ADDR_TRAP_CFG_2           0x0010020450
+#define A_ADDR_TRAP_CFG_3           0x0010020458
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define ADDR_TRAP_SPACING 8
+#define NUM_ADDR_TRAP 4
+#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
+
+
+/*  *********************************************************************
+    * System Interrupt Mapper Registers
+    ********************************************************************* */
+
+#define A_IMR_CPU0_BASE                 0x0010020000
+#define A_IMR_CPU1_BASE                 0x0010022000
+#define IMR_REGISTER_SPACING            0x2000
+#define IMR_REGISTER_SPACING_SHIFT      13
+
+#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
+#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg))
+
+#define R_IMR_INTERRUPT_DIAG            0x0010
+#define R_IMR_INTERRUPT_LDT             0x0018
+#define R_IMR_INTERRUPT_MASK            0x0028
+#define R_IMR_INTERRUPT_TRACE           0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
+#define R_IMR_LDT_INTERRUPT_SET         0x0048
+#define R_IMR_LDT_INTERRUPT             0x0018
+#define R_IMR_LDT_INTERRUPT_CLR         0x0020
+#define R_IMR_MAILBOX_CPU               0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU         0x1000
+#define R_IMR_MAILBOX_SET_CPU           0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU     0x1008
+#define R_IMR_MAILBOX_CLR_CPU           0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE     0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT    7
+#define R_IMR_INTERRUPT_MAP_BASE        0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT       64
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define A_MAILBOX_REGISTER(reg,cpu) \
+    (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
+
+/*  *********************************************************************
+    * System Performance Counter Registers
+    ********************************************************************* */
+
+#define A_SCD_PERF_CNT_CFG          0x00100204C0
+#define A_SCD_PERF_CNT_0            0x00100204D0
+#define A_SCD_PERF_CNT_1            0x00100204D8
+#define A_SCD_PERF_CNT_2            0x00100204E0
+#define A_SCD_PERF_CNT_3            0x00100204E8
+
+#define SCD_NUM_PERF_CNT 4
+#define SCD_PERF_CNT_SPACING 8
+#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
+
+/*  *********************************************************************
+    * System Bus Watcher Registers
+    ********************************************************************* */
+
+#define A_SCD_BUS_ERR_STATUS        0x0010020880
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define A_BUS_ERR_DATA_0            0x00100208A0
+#define A_BUS_ERR_DATA_1            0x00100208A8
+#define A_BUS_ERR_DATA_2            0x00100208B0
+#define A_BUS_ERR_DATA_3            0x00100208B8
+#define A_BUS_L2_ERRORS             0x00100208C0
+#define A_BUS_MEM_IO_ERRORS         0x00100208C8
+
+/*  *********************************************************************
+    * System Debug Controller Registers
+    ********************************************************************* */
+
+#define A_SCD_JTAG_BASE             0x0010000000
+
+/*  *********************************************************************
+    * System Trace Buffer Registers
+    ********************************************************************* */
+
+#define A_SCD_TRACE_CFG             0x0010020A00
+#define A_SCD_TRACE_READ            0x0010020A08
+#define A_SCD_TRACE_EVENT_0         0x0010020A20
+#define A_SCD_TRACE_EVENT_1         0x0010020A28
+#define A_SCD_TRACE_EVENT_2         0x0010020A30
+#define A_SCD_TRACE_EVENT_3         0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0      0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1      0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2      0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3      0x0010020A58
+#define A_SCD_TRACE_EVENT_4         0x0010020A60
+#define A_SCD_TRACE_EVENT_5         0x0010020A68
+#define A_SCD_TRACE_EVENT_6         0x0010020A70
+#define A_SCD_TRACE_EVENT_7         0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4      0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5      0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
+
+#define TRACE_REGISTER_SPACING 8
+#define TRACE_NUM_REGISTERS    8
+#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
+   (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
+#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
+   (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
+
+/*  *********************************************************************
+    * System Generic DMA Registers
+    ********************************************************************* */
+
+#define A_DM_0		  	    0x0010020B00
+#define A_DM_1		  	    0x0010020B20
+#define A_DM_2			    0x0010020B40
+#define A_DM_3			    0x0010020B60
+#define DM_REGISTER_SPACING	    0x20
+#define DM_NUM_CHANNELS		    4
+#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING))
+#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg))
+
+#define R_DM_DSCR_BASE		    0x0000000000
+#define R_DM_DSCR_COUNT		    0x0000000008
+#define R_DM_CUR_DSCR_ADDR	    0x0000000010
+#define R_DM_DSCR_BASE_DEBUG	    0x0000000018
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_PARTIAL_0		    0x0010020ba0
+#define A_DM_PARTIAL_1		    0x0010020ba8
+#define A_DM_PARTIAL_2		    0x0010020bb0
+#define A_DM_PARTIAL_3		    0x0010020bb8
+#define DM_PARTIAL_REGISTER_SPACING 0x8
+#define A_DM_PARTIAL(idx)	    (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING))
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_CRC_0		    0x0010020b80
+#define A_DM_CRC_1		    0x0010020b90
+#define DM_CRC_REGISTER_SPACING	    0x10
+#define DM_CRC_NUM_CHANNELS	    2
+#define A_DM_CRC_BASE(idx)	    (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING))
+#define A_DM_CRC_REGISTER(idx, reg)  (A_DM_CRC_BASE(idx) + (reg))
+
+#define R_CRC_DEF_0		    0x00
+#define R_CTCP_DEF_0		    0x08
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*  *********************************************************************
+    *  Physical Address Map
+    ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define A_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_PHYS_GENBUS			_SB_MAKE64(0x0010090000)
+#define A_PHYS_GENBUS_END		_SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32  _SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES  _SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES    _SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES   _SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS   _SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS     _SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS    _SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP                  _SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES     _SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS      _SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED                 _SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT     _SB_MAKE64(0xFD00000000)
+
+#define A_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS           4
+#define A_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D01E0000)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h
new file mode 100644
index 0000000..e49c3e8
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_scd.h
@@ -0,0 +1,654 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  SCD Constants and Macros			File: sb1250_scd.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the System Control and Debug module on the 1250.
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003,2004,2005
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+#ifndef _SB1250_SCD_H
+#define _SB1250_SCD_H
+
+#include "sb1250_defs.h"
+
+/*  *********************************************************************
+    *  System control/debug registers
+    ********************************************************************* */
+
+/*
+ * System Revision Register (Table 4-1)
+ */
+
+#define M_SYS_RESERVED		    _SB_MAKEMASK(8, 0)
+
+#define S_SYS_REVISION              _SB_MAKE64(8)
+#define M_SYS_REVISION              _SB_MAKEMASK(8, S_SYS_REVISION)
+#define V_SYS_REVISION(x)           _SB_MAKEVALUE(x, S_SYS_REVISION)
+#define G_SYS_REVISION(x)           _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION)
+
+#define K_SYS_REVISION_BCM1250_PASS1	0x01
+
+#define K_SYS_REVISION_BCM1250_PASS2	0x03
+#define K_SYS_REVISION_BCM1250_A1	0x03	/* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2	0x04	/* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3	0x05	/* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4	0x06	/* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6	0x07	/* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8	0x0b	/* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9	0x08
+#define K_SYS_REVISION_BCM1250_A10	K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2	0x10
+#define K_SYS_REVISION_BCM1250_B0	K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1	0x10
+#define K_SYS_REVISION_BCM1250_B2	0x11
+
+#define K_SYS_REVISION_BCM1250_C0	0x20
+#define K_SYS_REVISION_BCM1250_C1	0x21
+#define K_SYS_REVISION_BCM1250_C2	0x22
+#define K_SYS_REVISION_BCM1250_C3	0x23
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_REVISION_PASS1	    K_SYS_REVISION_BCM1250_PASS1
+#define K_SYS_REVISION_PASS2	    K_SYS_REVISION_BCM1250_PASS2
+#define K_SYS_REVISION_PASS2_2	    K_SYS_REVISION_BCM1250_PASS2_2
+#define K_SYS_REVISION_PASS3	    K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3	K_SYS_REVISION_BCM1250_C0
+#endif /* 1250 */
+
+#define K_SYS_REVISION_BCM112x_A1	0x20
+#define K_SYS_REVISION_BCM112x_A2	0x21
+#define K_SYS_REVISION_BCM112x_A3	0x22
+#define K_SYS_REVISION_BCM112x_A4	0x23
+#define K_SYS_REVISION_BCM112x_B0	0x30
+
+#define K_SYS_REVISION_BCM1480_S0	0x01
+#define K_SYS_REVISION_BCM1480_A1	0x02
+#define K_SYS_REVISION_BCM1480_A2	0x03
+#define K_SYS_REVISION_BCM1480_A3	0x04
+#define K_SYS_REVISION_BCM1480_B0	0x11
+
+/*Cache size - 23:20  of revision register*/
+#define S_SYS_L2C_SIZE            _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE            _SB_MAKEMASK(4, S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x)         _SB_MAKEVALUE(x, S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x)         _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB	0
+#define K_SYS_L2C_SIZE_512KB	5
+#define K_SYS_L2C_SIZE_256KB	2
+#define K_SYS_L2C_SIZE_128KB	1
+
+#define K_SYS_L2C_SIZE_BCM1250	K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125	K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122	K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24  of revision register*/
+#define S_SYS_NUM_CPUS            _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS            _SB_MAKEMASK(4, S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x)         _SB_MAKEVALUE(x, S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x)         _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS)
+
+
+/* XXX: discourage people from using these constants.  */
+#define S_SYS_PART                  _SB_MAKE64(16)
+#define M_SYS_PART                  _SB_MAKEMASK(16, S_SYS_PART)
+#define V_SYS_PART(x)               _SB_MAKEVALUE(x, S_SYS_PART)
+#define G_SYS_PART(x)               _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART)
+
+/* XXX: discourage people from using these constants.  */
+#define K_SYS_PART_SB1250           0x1250
+#define K_SYS_PART_BCM1120          0x1121
+#define K_SYS_PART_BCM1125          0x1123
+#define K_SYS_PART_BCM1125H         0x1124
+#define K_SYS_PART_BCM1122          0x1113
+
+
+/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field.  */
+#define S_SYS_SOC_TYPE              _SB_MAKE64(16)
+#define M_SYS_SOC_TYPE              _SB_MAKEMASK(4, S_SYS_SOC_TYPE)
+#define V_SYS_SOC_TYPE(x)           _SB_MAKEVALUE(x, S_SYS_SOC_TYPE)
+#define G_SYS_SOC_TYPE(x)           _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE)
+
+#define K_SYS_SOC_TYPE_BCM1250      0x0
+#define K_SYS_SOC_TYPE_BCM1120      0x1
+#define K_SYS_SOC_TYPE_BCM1250_ALT  0x2		/* 1250pass2 w/ 1/4 L2.  */
+#define K_SYS_SOC_TYPE_BCM1125      0x3
+#define K_SYS_SOC_TYPE_BCM1125H     0x4
+#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5		/* 1250pass2 w/ 1/2 L2.  */
+#define K_SYS_SOC_TYPE_BCM1x80      0x6
+#define K_SYS_SOC_TYPE_BCM1x55      0x7
+
+/*
+ * Calculate correct SOC type given a copy of system revision register.
+ *
+ * (For the assembler version, sysrev and dest may be the same register.
+ * Also, it clobbers AT.)
+ */
+#ifdef __ASSEMBLER__
+#define SYS_SOC_TYPE(dest, sysrev)					\
+	.set push ;							\
+	.set reorder ;							\
+	dsrl	dest, sysrev, S_SYS_SOC_TYPE ;				\
+	andi	dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE);		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ;		\
+	beq	dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f	 ;		\
+	b	992f ;							\
+991:	li	dest, K_SYS_SOC_TYPE_BCM1250 ;				\
+992:									\
+	.set pop
+#else
+#define SYS_SOC_TYPE(sysrev)						\
+	((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT		\
+	  || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2)	\
+	 ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev))
+#endif
+
+#define S_SYS_WID                   _SB_MAKE64(32)
+#define M_SYS_WID                   _SB_MAKEMASK(32, S_SYS_WID)
+#define V_SYS_WID(x)                _SB_MAKEVALUE(x, S_SYS_WID)
+#define G_SYS_WID(x)                _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID)
+
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+/* Wafer ID: bits 31:0 */
+#define S_SYS_WAFERID1_200        _SB_MAKE64(0)
+#define M_SYS_WAFERID1_200        _SB_MAKEMASK(32, S_SYS_WAFERID1_200)
+#define V_SYS_WAFERID1_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID1_200)
+#define G_SYS_WAFERID1_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200)
+
+#define S_SYS_BIN                 _SB_MAKE64(32)
+#define M_SYS_BIN                 _SB_MAKEMASK(4, S_SYS_BIN)
+#define V_SYS_BIN(x)              _SB_MAKEVALUE(x, S_SYS_BIN)
+#define G_SYS_BIN(x)              _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN)
+
+/* Wafer ID: bits 39:36 */
+#define S_SYS_WAFERID2_200        _SB_MAKE64(36)
+#define M_SYS_WAFERID2_200        _SB_MAKEMASK(4, S_SYS_WAFERID2_200)
+#define V_SYS_WAFERID2_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID2_200)
+#define G_SYS_WAFERID2_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200)
+
+/* Wafer ID: bits 39:0 */
+#define S_SYS_WAFERID_300         _SB_MAKE64(0)
+#define M_SYS_WAFERID_300         _SB_MAKEMASK(40, S_SYS_WAFERID_300)
+#define V_SYS_WAFERID_300(x)      _SB_MAKEVALUE(x, S_SYS_WAFERID_300)
+#define G_SYS_WAFERID_300(x)      _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300)
+
+#define S_SYS_XPOS                _SB_MAKE64(40)
+#define M_SYS_XPOS                _SB_MAKEMASK(6, S_SYS_XPOS)
+#define V_SYS_XPOS(x)             _SB_MAKEVALUE(x, S_SYS_XPOS)
+#define G_SYS_XPOS(x)             _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS)
+
+#define S_SYS_YPOS                _SB_MAKE64(46)
+#define M_SYS_YPOS                _SB_MAKEMASK(6, S_SYS_YPOS)
+#define V_SYS_YPOS(x)             _SB_MAKEVALUE(x, S_SYS_YPOS)
+#define G_SYS_YPOS(x)             _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS)
+#endif
+
+
+/*
+ * System Config Register (Table 4-2)
+ * Register: SCD_SYSTEM_CFG
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SYS_LDT_PLL_BYP           _SB_MAKEMASK1(3)
+#define M_SYS_PCI_SYNC_TEST_MODE    _SB_MAKEMASK1(4)
+#define M_SYS_IOB0_DIV              _SB_MAKEMASK1(5)
+#define M_SYS_IOB1_DIV              _SB_MAKEMASK1(6)
+
+#define S_SYS_PLL_DIV               _SB_MAKE64(7)
+#define M_SYS_PLL_DIV               _SB_MAKEMASK(5, S_SYS_PLL_DIV)
+#define V_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_SYS_PLL_DIV)
+#define G_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV)
+
+#define M_SYS_SER0_ENABLE           _SB_MAKEMASK1(12)
+#define M_SYS_SER0_RSTB_EN          _SB_MAKEMASK1(13)
+#define M_SYS_SER1_ENABLE           _SB_MAKEMASK1(14)
+#define M_SYS_SER1_RSTB_EN          _SB_MAKEMASK1(15)
+#define M_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+
+#define S_SYS_BOOT_MODE             _SB_MAKE64(17)
+#define M_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_SYS_BOOT_MODE)
+#define V_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_SYS_BOOT_MODE)
+#define G_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE)
+#define K_SYS_BOOT_MODE_ROM32       0
+#define K_SYS_BOOT_MODE_ROM8        1
+#define K_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_SYS_BOOT_MODE_SMBUS_BIG   3
+
+#define M_SYS_PCI_HOST              _SB_MAKEMASK1(19)
+#define M_SYS_PCI_ARBITER           _SB_MAKEMASK1(20)
+#define M_SYS_SOUTH_ON_LDT          _SB_MAKEMASK1(21)
+#define M_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
+#define M_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
+#define M_SYS_LDT_TEST_EN           _SB_MAKEMASK1(24)
+#define M_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(25)
+
+#define S_SYS_CONFIG                26
+#define M_SYS_CONFIG                _SB_MAKEMASK(6, S_SYS_CONFIG)
+#define V_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_SYS_CONFIG)
+#define G_SYS_CONFIG(x)             _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG)
+
+/* The following bits are writeable by JTAG only. */
+
+#define M_SYS_CLKSTOP               _SB_MAKEMASK1(32)
+#define M_SYS_CLKSTEP               _SB_MAKEMASK1(33)
+
+#define S_SYS_CLKCOUNT              34
+#define M_SYS_CLKCOUNT              _SB_MAKEMASK(8, S_SYS_CLKCOUNT)
+#define V_SYS_CLKCOUNT(x)           _SB_MAKEVALUE(x, S_SYS_CLKCOUNT)
+#define G_SYS_CLKCOUNT(x)           _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT)
+
+#define M_SYS_PLL_BYPASS            _SB_MAKEMASK1(42)
+
+#define S_SYS_PLL_IREF		    43
+#define M_SYS_PLL_IREF		    _SB_MAKEMASK(2, S_SYS_PLL_IREF)
+
+#define S_SYS_PLL_VCO		    45
+#define M_SYS_PLL_VCO		    _SB_MAKEMASK(2, S_SYS_PLL_VCO)
+
+#define S_SYS_PLL_VREG		    47
+#define M_SYS_PLL_VREG		    _SB_MAKEMASK(2, S_SYS_PLL_VREG)
+
+#define M_SYS_MEM_RESET             _SB_MAKEMASK1(49)
+#define M_SYS_L2C_RESET             _SB_MAKEMASK1(50)
+#define M_SYS_IO_RESET_0            _SB_MAKEMASK1(51)
+#define M_SYS_IO_RESET_1            _SB_MAKEMASK1(52)
+#define M_SYS_SCD_RESET             _SB_MAKEMASK1(53)
+
+/* End of bits writable by JTAG only. */
+
+#define M_SYS_CPU_RESET_0           _SB_MAKEMASK1(54)
+#define M_SYS_CPU_RESET_1           _SB_MAKEMASK1(55)
+
+#define M_SYS_UNICPU0               _SB_MAKEMASK1(56)
+#define M_SYS_UNICPU1               _SB_MAKEMASK1(57)
+
+#define M_SYS_SB_SOFTRES            _SB_MAKEMASK1(58)
+#define M_SYS_EXT_RESET             _SB_MAKEMASK1(59)
+#define M_SYS_SYSTEM_RESET          _SB_MAKEMASK1(60)
+
+#define M_SYS_MISR_MODE             _SB_MAKEMASK1(61)
+#define M_SYS_MISR_RESET            _SB_MAKEMASK1(62)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
+
+/*
+ * Mailbox Registers (Table 4-3)
+ * Registers: SCD_MBOX_CPU_x
+ */
+
+#define S_MBOX_INT_3                0
+#define M_MBOX_INT_3                _SB_MAKEMASK(16, S_MBOX_INT_3)
+#define S_MBOX_INT_2                16
+#define M_MBOX_INT_2                _SB_MAKEMASK(16, S_MBOX_INT_2)
+#define S_MBOX_INT_1                32
+#define M_MBOX_INT_1                _SB_MAKEMASK(16, S_MBOX_INT_1)
+#define S_MBOX_INT_0                48
+#define M_MBOX_INT_0                _SB_MAKEMASK(16, S_MBOX_INT_0)
+
+/*
+ * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ */
+
+#define V_SCD_WDOG_FREQ             1000000
+
+#define S_SCD_WDOG_INIT             0
+#define M_SCD_WDOG_INIT             _SB_MAKEMASK(23, S_SCD_WDOG_INIT)
+
+#define S_SCD_WDOG_CNT              0
+#define M_SCD_WDOG_CNT              _SB_MAKEMASK(23, S_SCD_WDOG_CNT)
+
+#define S_SCD_WDOG_ENABLE           0
+#define M_SCD_WDOG_ENABLE           _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
+
+#define S_SCD_WDOG_RESET_TYPE       2
+#define M_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE)
+#define V_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE)
+#define G_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE)
+
+#define K_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
+#define K_SCD_WDOG_RESET_SOFT       1
+#define K_SCD_WDOG_RESET_CPU0       3
+#define K_SCD_WDOG_RESET_CPU1       5
+#define K_SCD_WDOG_RESET_BOTH_CPUS  7
+
+/* This feature is present in 1250 C0 and later, but *not* in 112x A revs.  */
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define S_SCD_WDOG_HAS_RESET        8
+#define M_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
+#endif
+
+
+/*
+ * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13)
+ */
+
+#define V_SCD_TIMER_FREQ            1000000
+
+#define S_SCD_TIMER_INIT            0
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(23, S_SCD_TIMER_INIT)
+#define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_INIT)
+#define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT)
+
+#define V_SCD_TIMER_WIDTH	    23
+#define S_SCD_TIMER_CNT             0
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT)
+#define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_CNT)
+#define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT)
+
+#define M_SCD_TIMER_ENABLE          _SB_MAKEMASK1(0)
+#define M_SCD_TIMER_MODE            _SB_MAKEMASK1(1)
+#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE
+
+/*
+ * System Performance Counters
+ */
+
+#define S_SPC_CFG_SRC0            0
+#define M_SPC_CFG_SRC0            _SB_MAKEMASK(8, S_SPC_CFG_SRC0)
+#define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC0)
+#define G_SPC_CFG_SRC0(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0)
+
+#define S_SPC_CFG_SRC1            8
+#define M_SPC_CFG_SRC1            _SB_MAKEMASK(8, S_SPC_CFG_SRC1)
+#define V_SPC_CFG_SRC1(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC1)
+#define G_SPC_CFG_SRC1(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1)
+
+#define S_SPC_CFG_SRC2            16
+#define M_SPC_CFG_SRC2            _SB_MAKEMASK(8, S_SPC_CFG_SRC2)
+#define V_SPC_CFG_SRC2(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC2)
+#define G_SPC_CFG_SRC2(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2)
+
+#define S_SPC_CFG_SRC3            24
+#define M_SPC_CFG_SRC3            _SB_MAKEMASK(8, S_SPC_CFG_SRC3)
+#define V_SPC_CFG_SRC3(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC3)
+#define G_SPC_CFG_SRC3(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3)
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
+#define M_SPC_CFG_ENABLE	_SB_MAKEMASK1(33)
+#endif
+
+
+/*
+ * Bus Watcher
+ */
+
+#define S_SCD_BERR_TID            8
+#define M_SCD_BERR_TID            _SB_MAKEMASK(10, S_SCD_BERR_TID)
+#define V_SCD_BERR_TID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_TID)
+#define G_SCD_BERR_TID(x)         _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID)
+
+#define S_SCD_BERR_RID            18
+#define M_SCD_BERR_RID            _SB_MAKEMASK(4, S_SCD_BERR_RID)
+#define V_SCD_BERR_RID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_RID)
+#define G_SCD_BERR_RID(x)         _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID)
+
+#define S_SCD_BERR_DCODE          22
+#define M_SCD_BERR_DCODE          _SB_MAKEMASK(3, S_SCD_BERR_DCODE)
+#define V_SCD_BERR_DCODE(x)       _SB_MAKEVALUE(x, S_SCD_BERR_DCODE)
+#define G_SCD_BERR_DCODE(x)       _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE)
+
+#define M_SCD_BERR_MULTERRS       _SB_MAKEMASK1(30)
+
+
+#define S_SCD_L2ECC_CORR_D        0
+#define M_SCD_L2ECC_CORR_D        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D)
+#define V_SCD_L2ECC_CORR_D(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D)
+#define G_SCD_L2ECC_CORR_D(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D)
+
+#define S_SCD_L2ECC_BAD_D         8
+#define M_SCD_L2ECC_BAD_D         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D)
+#define V_SCD_L2ECC_BAD_D(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D)
+#define G_SCD_L2ECC_BAD_D(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D)
+
+#define S_SCD_L2ECC_CORR_T        16
+#define M_SCD_L2ECC_CORR_T        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T)
+#define V_SCD_L2ECC_CORR_T(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T)
+#define G_SCD_L2ECC_CORR_T(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T)
+
+#define S_SCD_L2ECC_BAD_T         24
+#define M_SCD_L2ECC_BAD_T         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T)
+#define V_SCD_L2ECC_BAD_T(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T)
+#define G_SCD_L2ECC_BAD_T(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T)
+
+#define S_SCD_MEM_ECC_CORR        0
+#define M_SCD_MEM_ECC_CORR        _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR)
+#define V_SCD_MEM_ECC_CORR(x)     _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR)
+#define G_SCD_MEM_ECC_CORR(x)     _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR)
+
+#define S_SCD_MEM_ECC_BAD         8
+#define M_SCD_MEM_ECC_BAD         _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD)
+#define V_SCD_MEM_ECC_BAD(x)      _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD)
+#define G_SCD_MEM_ECC_BAD(x)      _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD)
+
+#define S_SCD_MEM_BUSERR          16
+#define M_SCD_MEM_BUSERR          _SB_MAKEMASK(8, S_SCD_MEM_BUSERR)
+#define V_SCD_MEM_BUSERR(x)       _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR)
+#define G_SCD_MEM_BUSERR(x)       _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR)
+
+
+/*
+ * Address Trap Registers
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
+#define M_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
+
+#define S_ATRAP_CFG_CNT            0
+#define M_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_ATRAP_CFG_CNT)
+#define V_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT)
+#define G_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT)
+
+#define M_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
+#define M_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
+#define M_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
+#define M_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
+
+#define S_ATRAP_CFG_AGENTID     8
+#define M_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID)
+#define V_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID)
+#define G_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID)
+
+#define K_BUS_AGENT_CPU0	0
+#define K_BUS_AGENT_CPU1	1
+#define K_BUS_AGENT_IOB0	2
+#define K_BUS_AGENT_IOB1	3
+#define K_BUS_AGENT_SCD	4
+#define K_BUS_AGENT_L2C	6
+#define K_BUS_AGENT_MC	7
+
+#define S_ATRAP_CFG_CATTR     12
+#define M_ATRAP_CFG_CATTR     _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR)
+#define V_ATRAP_CFG_CATTR(x)  _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR)
+#define G_ATRAP_CFG_CATTR(x)  _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR)
+
+#define K_ATRAP_CFG_CATTR_IGNORE	0
+#define K_ATRAP_CFG_CATTR_UNC    	1
+#define K_ATRAP_CFG_CATTR_CACHEABLE	2
+#define K_ATRAP_CFG_CATTR_NONCOH  	3
+#define K_ATRAP_CFG_CATTR_COHERENT	4
+#define K_ATRAP_CFG_CATTR_NOTUNC	5
+#define K_ATRAP_CFG_CATTR_NOTNONCOH	6
+#define K_ATRAP_CFG_CATTR_NOTCOHERENT   7
+
+#endif	/* 1250/112x */
+
+/*
+ * Trace Buffer Config register
+ */
+
+#define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
+#define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
+#define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)
+#define M_SCD_TRACE_CFG_STOP            _SB_MAKEMASK1(3)
+#define M_SCD_TRACE_CFG_FREEZE          _SB_MAKEMASK1(4)
+#define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
+#define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
+#define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * This field is the same on the 1250/112x and 1480, just located in
+ * a slightly different place in the register.
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define S_SCD_TRACE_CFG_CUR_ADDR        10
+#else
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SCD_TRACE_CFG_CUR_ADDR        24
+#endif	/* 1480 */
+#endif  /* 1250/112x */
+
+#define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR)
+#define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR)
+#define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR)
+
+/*
+ * Trace Event registers
+ */
+
+#define S_SCD_TREVT_ADDR_MATCH          0
+#define M_SCD_TREVT_ADDR_MATCH          _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH)
+#define V_SCD_TREVT_ADDR_MATCH(x)       _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH)
+#define G_SCD_TREVT_ADDR_MATCH(x)       _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH)
+
+#define M_SCD_TREVT_REQID_MATCH         _SB_MAKEMASK1(4)
+#define M_SCD_TREVT_DATAID_MATCH        _SB_MAKEMASK1(5)
+#define M_SCD_TREVT_RESPID_MATCH        _SB_MAKEMASK1(6)
+#define M_SCD_TREVT_INTERRUPT           _SB_MAKEMASK1(7)
+#define M_SCD_TREVT_DEBUG_PIN           _SB_MAKEMASK1(9)
+#define M_SCD_TREVT_WRITE               _SB_MAKEMASK1(10)
+#define M_SCD_TREVT_READ                _SB_MAKEMASK1(11)
+
+#define S_SCD_TREVT_REQID               12
+#define M_SCD_TREVT_REQID               _SB_MAKEMASK(4, S_SCD_TREVT_REQID)
+#define V_SCD_TREVT_REQID(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_REQID)
+#define G_SCD_TREVT_REQID(x)            _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID)
+
+#define S_SCD_TREVT_RESPID              16
+#define M_SCD_TREVT_RESPID              _SB_MAKEMASK(4, S_SCD_TREVT_RESPID)
+#define V_SCD_TREVT_RESPID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID)
+#define G_SCD_TREVT_RESPID(x)           _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID)
+
+#define S_SCD_TREVT_DATAID              20
+#define M_SCD_TREVT_DATAID              _SB_MAKEMASK(4, S_SCD_TREVT_DATAID)
+#define V_SCD_TREVT_DATAID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID)
+#define G_SCD_TREVT_DATAID(x)           _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID)
+
+#define S_SCD_TREVT_COUNT               24
+#define M_SCD_TREVT_COUNT               _SB_MAKEMASK(8, S_SCD_TREVT_COUNT)
+#define V_SCD_TREVT_COUNT(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT)
+#define G_SCD_TREVT_COUNT(x)            _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT)
+
+/*
+ * Trace Sequence registers
+ */
+
+#define S_SCD_TRSEQ_EVENT4              0
+#define M_SCD_TRSEQ_EVENT4              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4)
+#define V_SCD_TRSEQ_EVENT4(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4)
+#define G_SCD_TRSEQ_EVENT4(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4)
+
+#define S_SCD_TRSEQ_EVENT3              4
+#define M_SCD_TRSEQ_EVENT3              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3)
+#define V_SCD_TRSEQ_EVENT3(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3)
+#define G_SCD_TRSEQ_EVENT3(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3)
+
+#define S_SCD_TRSEQ_EVENT2              8
+#define M_SCD_TRSEQ_EVENT2              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2)
+#define V_SCD_TRSEQ_EVENT2(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2)
+#define G_SCD_TRSEQ_EVENT2(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2)
+
+#define S_SCD_TRSEQ_EVENT1              12
+#define M_SCD_TRSEQ_EVENT1              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1)
+#define V_SCD_TRSEQ_EVENT1(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1)
+#define G_SCD_TRSEQ_EVENT1(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1)
+
+#define K_SCD_TRSEQ_E0                  0
+#define K_SCD_TRSEQ_E1                  1
+#define K_SCD_TRSEQ_E2                  2
+#define K_SCD_TRSEQ_E3                  3
+#define K_SCD_TRSEQ_E0_E1               4
+#define K_SCD_TRSEQ_E1_E2               5
+#define K_SCD_TRSEQ_E2_E3               6
+#define K_SCD_TRSEQ_E0_E1_E2            7
+#define K_SCD_TRSEQ_E0_E1_E2_E3         8
+#define K_SCD_TRSEQ_E0E1                9
+#define K_SCD_TRSEQ_E0E1E2              10
+#define K_SCD_TRSEQ_E0E1E2E3            11
+#define K_SCD_TRSEQ_E0E1_E2             12
+#define K_SCD_TRSEQ_E0E1_E2E3           13
+#define K_SCD_TRSEQ_E0E1_E2_E3          14
+#define K_SCD_TRSEQ_IGNORED             15
+
+#define K_SCD_TRSEQ_TRIGGER_ALL         (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
+                                         V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
+
+#define S_SCD_TRSEQ_FUNCTION            16
+#define M_SCD_TRSEQ_FUNCTION            _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION)
+#define V_SCD_TRSEQ_FUNCTION(x)         _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION)
+#define G_SCD_TRSEQ_FUNCTION(x)         _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION)
+
+#define K_SCD_TRSEQ_FUNC_NOP            0
+#define K_SCD_TRSEQ_FUNC_START          1
+#define K_SCD_TRSEQ_FUNC_STOP           2
+#define K_SCD_TRSEQ_FUNC_FREEZE         3
+
+#define V_SCD_TRSEQ_FUNC_NOP            V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
+#define V_SCD_TRSEQ_FUNC_START          V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
+#define V_SCD_TRSEQ_FUNC_STOP           V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
+#define V_SCD_TRSEQ_FUNC_FREEZE         V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
+
+#define M_SCD_TRSEQ_ASAMPLE             _SB_MAKEMASK1(18)
+#define M_SCD_TRSEQ_DSAMPLE             _SB_MAKEMASK1(19)
+#define M_SCD_TRSEQ_DEBUGPIN            _SB_MAKEMASK1(20)
+#define M_SCD_TRSEQ_DEBUGCPU            _SB_MAKEMASK1(21)
+#define M_SCD_TRSEQ_CLEARUSE            _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A              _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A               _SB_MAKEMASK1(24)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h
new file mode 100644
index 0000000..0476992
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h
@@ -0,0 +1,204 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  SMBUS Constants                          File: sb1250_smbus.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's SMbus devices.
+    *
+    *  SB1250 specification level:  10/21/02
+    *  BCM1280 specification level:  11/24/03
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SMBUS_H
+#define _SB1250_SMBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * SMBus Clock Frequency Register (Table 14-2)
+ */
+
+#define S_SMB_FREQ_DIV              0
+#define M_SMB_FREQ_DIV              _SB_MAKEMASK(13, S_SMB_FREQ_DIV)
+#define V_SMB_FREQ_DIV(x)           _SB_MAKEVALUE(x, S_SMB_FREQ_DIV)
+
+#define K_SMB_FREQ_400KHZ	    0x1F
+#define K_SMB_FREQ_100KHZ	    0x7D
+#define K_SMB_FREQ_10KHZ	    1250
+
+#define S_SMB_CMD                   0
+#define M_SMB_CMD                   _SB_MAKEMASK(8, S_SMB_CMD)
+#define V_SMB_CMD(x)                _SB_MAKEVALUE(x, S_SMB_CMD)
+
+/*
+ * SMBus control register (Table 14-4)
+ */
+
+#define M_SMB_ERR_INTR              _SB_MAKEMASK1(0)
+#define M_SMB_FINISH_INTR           _SB_MAKEMASK1(1)
+
+#define S_SMB_DATA_OUT              4
+#define M_SMB_DATA_OUT              _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x)           _SB_MAKEVALUE(x, S_SMB_DATA_OUT)
+
+#define M_SMB_DATA_DIR              _SB_MAKEMASK1(5)
+#define M_SMB_DATA_DIR_OUTPUT       M_SMB_DATA_DIR
+#define M_SMB_CLK_OUT               _SB_MAKEMASK1(6)
+#define M_SMB_DIRECT_ENABLE         _SB_MAKEMASK1(7)
+
+/*
+ * SMBus status registers (Table 14-5)
+ */
+
+#define M_SMB_BUSY                  _SB_MAKEMASK1(0)
+#define M_SMB_ERROR                 _SB_MAKEMASK1(1)
+#define M_SMB_ERROR_TYPE            _SB_MAKEMASK1(2)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN                5
+#define M_SMB_SCL_IN                _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x)             _SB_MAKEVALUE(x, S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x)             _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF                   6
+#define M_SMB_REF                   _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x)                _SB_MAKEVALUE(x, S_SMB_REF)
+#define G_SMB_REF(x)                _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF)
+
+#define S_SMB_DATA_IN               7
+#define M_SMB_DATA_IN               _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x)            _SB_MAKEVALUE(x, S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x)            _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN)
+
+/*
+ * SMBus Start/Command registers (Table 14-9)
+ */
+
+#define S_SMB_ADDR                  0
+#define M_SMB_ADDR                  _SB_MAKEMASK(7, S_SMB_ADDR)
+#define V_SMB_ADDR(x)               _SB_MAKEVALUE(x, S_SMB_ADDR)
+#define G_SMB_ADDR(x)               _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR)
+
+#define M_SMB_QDATA                 _SB_MAKEMASK1(7)
+
+#define S_SMB_TT                    8
+#define M_SMB_TT                    _SB_MAKEMASK(3, S_SMB_TT)
+#define V_SMB_TT(x)                 _SB_MAKEVALUE(x, S_SMB_TT)
+#define G_SMB_TT(x)                 _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT)
+
+#define K_SMB_TT_WR1BYTE            0
+#define K_SMB_TT_WR2BYTE            1
+#define K_SMB_TT_WR3BYTE            2
+#define K_SMB_TT_CMD_RD1BYTE        3
+#define K_SMB_TT_CMD_RD2BYTE        4
+#define K_SMB_TT_RD1BYTE            5
+#define K_SMB_TT_QUICKCMD           6
+#define K_SMB_TT_EEPROMREAD         7
+
+#define V_SMB_TT_WR1BYTE	    V_SMB_TT(K_SMB_TT_WR1BYTE)
+#define V_SMB_TT_WR2BYTE	    V_SMB_TT(K_SMB_TT_WR2BYTE)
+#define V_SMB_TT_WR3BYTE	    V_SMB_TT(K_SMB_TT_WR3BYTE)
+#define V_SMB_TT_CMD_RD1BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD1BYTE)
+#define V_SMB_TT_CMD_RD2BYTE	    V_SMB_TT(K_SMB_TT_CMD_RD2BYTE)
+#define V_SMB_TT_RD1BYTE	    V_SMB_TT(K_SMB_TT_RD1BYTE)
+#define V_SMB_TT_QUICKCMD	    V_SMB_TT(K_SMB_TT_QUICKCMD)
+#define V_SMB_TT_EEPROMREAD	    V_SMB_TT(K_SMB_TT_EEPROMREAD)
+
+#define M_SMB_PEC                   _SB_MAKEMASK1(15)
+
+/*
+ * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7)
+ */
+
+#define S_SMB_LB                    0
+#define M_SMB_LB                    _SB_MAKEMASK(8, S_SMB_LB)
+#define V_SMB_LB(x)                 _SB_MAKEVALUE(x, S_SMB_LB)
+
+#define S_SMB_MB                    8
+#define M_SMB_MB                    _SB_MAKEMASK(8, S_SMB_MB)
+#define V_SMB_MB(x)                 _SB_MAKEVALUE(x, S_SMB_MB)
+
+
+/*
+ * SMBus Packet Error Check register (Table 14-8)
+ */
+
+#define S_SPEC_PEC                  0
+#define M_SPEC_PEC                  _SB_MAKEMASK(8, S_SPEC_PEC)
+#define V_SPEC_MB(x)                _SB_MAKEVALUE(x, S_SPEC_PEC)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+
+#define S_SMB_CMDH                  8
+#define M_SMB_CMDH                  _SB_MAKEMASK(8, S_SMB_CMDH)
+#define V_SMB_CMDH(x)               _SB_MAKEVALUE(x, S_SMB_CMDH)
+
+#define M_SMB_EXTEND		    _SB_MAKEMASK1(14)
+
+#define S_SMB_DFMT                  8
+#define M_SMB_DFMT                  _SB_MAKEMASK(3, S_SMB_DFMT)
+#define V_SMB_DFMT(x)               _SB_MAKEVALUE(x, S_SMB_DFMT)
+#define G_SMB_DFMT(x)               _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT)
+
+#define K_SMB_DFMT_1BYTE            0
+#define K_SMB_DFMT_2BYTE            1
+#define K_SMB_DFMT_3BYTE            2
+#define K_SMB_DFMT_4BYTE            3
+#define K_SMB_DFMT_NODATA           4
+#define K_SMB_DFMT_CMD4BYTE         5
+#define K_SMB_DFMT_CMD5BYTE         6
+#define K_SMB_DFMT_RESERVED         7
+
+#define V_SMB_DFMT_1BYTE	    V_SMB_DFMT(K_SMB_DFMT_1BYTE)
+#define V_SMB_DFMT_2BYTE	    V_SMB_DFMT(K_SMB_DFMT_2BYTE)
+#define V_SMB_DFMT_3BYTE	    V_SMB_DFMT(K_SMB_DFMT_3BYTE)
+#define V_SMB_DFMT_4BYTE	    V_SMB_DFMT(K_SMB_DFMT_4BYTE)
+#define V_SMB_DFMT_NODATA	    V_SMB_DFMT(K_SMB_DFMT_NODATA)
+#define V_SMB_DFMT_CMD4BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE)
+#define V_SMB_DFMT_CMD5BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
+#define V_SMB_DFMT_RESERVED	    V_SMB_DFMT(K_SMB_DFMT_RESERVED)
+
+#define S_SMB_AFMT                  11
+#define M_SMB_AFMT                  _SB_MAKEMASK(2, S_SMB_AFMT)
+#define V_SMB_AFMT(x)               _SB_MAKEVALUE(x, S_SMB_AFMT)
+#define G_SMB_AFMT(x)               _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE             0
+#define K_SMB_AFMT_ADDR             1
+#define K_SMB_AFMT_ADDR_CMD1BYTE    2
+#define K_SMB_AFMT_ADDR_CMD2BYTE    3
+
+#define V_SMB_AFMT_NONE		    V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR		    V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE    V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE    V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR		    _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h
new file mode 100644
index 0000000..d4b8558
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h
@@ -0,0 +1,146 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  Synchronous Serial Constants              File: sb1250_syncser.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's Synchronous Serial
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_SYNCSER_H
+#define _SB1250_SYNCSER_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Serial Mode Configuration Register
+ */
+
+#define M_SYNCSER_CRC_MODE                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_MSB_FIRST                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_FLAG_NUM                 2
+#define M_SYNCSER_FLAG_NUM                 _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM)
+#define V_SYNCSER_FLAG_NUM                 _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM)
+
+#define M_SYNCSER_FLAG_EN                  _SB_MAKEMASK1(6)
+#define M_SYNCSER_HDLC_EN                  _SB_MAKEMASK1(7)
+#define M_SYNCSER_LOOP_MODE                _SB_MAKEMASK1(8)
+#define M_SYNCSER_LOOPBACK                 _SB_MAKEMASK1(9)
+
+/*
+ * Serial Clock Source and Line Interface Mode Register
+ */
+
+#define M_SYNCSER_RXCLK_INV                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RXCLK_EXT                _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_RXSYNC_DLY               2
+#define M_SYNCSER_RXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY)
+#define V_SYNCSER_RXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY)
+
+#define M_SYNCSER_RXSYNC_LOW               _SB_MAKEMASK1(4)
+#define M_SYNCSER_RXSTRB_LOW               _SB_MAKEMASK1(5)
+
+#define M_SYNCSER_RXSYNC_EDGE              _SB_MAKEMASK1(6)
+#define M_SYNCSER_RXSYNC_INT               _SB_MAKEMASK1(7)
+
+#define M_SYNCSER_TXCLK_INV                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TXCLK_EXT                _SB_MAKEMASK1(9)
+
+#define S_SYNCSER_TXSYNC_DLY               10
+#define M_SYNCSER_TXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY)
+#define V_SYNCSER_TXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY)
+
+#define M_SYNCSER_TXSYNC_LOW               _SB_MAKEMASK1(12)
+#define M_SYNCSER_TXSTRB_LOW               _SB_MAKEMASK1(13)
+
+#define M_SYNCSER_TXSYNC_EDGE              _SB_MAKEMASK1(14)
+#define M_SYNCSER_TXSYNC_INT               _SB_MAKEMASK1(15)
+
+/*
+ * Serial Command Register
+ */
+
+#define M_SYNCSER_CMD_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_CMD_TX_EN                _SB_MAKEMASK1(1)
+#define M_SYNCSER_CMD_RX_RESET             _SB_MAKEMASK1(2)
+#define M_SYNCSER_CMD_TX_RESET             _SB_MAKEMASK1(3)
+#define M_SYNCSER_CMD_TX_PAUSE             _SB_MAKEMASK1(5)
+
+/*
+ * Serial DMA Enable Register
+ */
+
+#define M_SYNCSER_DMA_RX_EN                _SB_MAKEMASK1(0)
+#define M_SYNCSER_DMA_TX_EN                _SB_MAKEMASK1(4)
+
+/*
+ * Serial Status Register
+ */
+
+#define M_SYNCSER_RX_CRCERR                _SB_MAKEMASK1(0)
+#define M_SYNCSER_RX_ABORT                 _SB_MAKEMASK1(1)
+#define M_SYNCSER_RX_OCTET                 _SB_MAKEMASK1(2)
+#define M_SYNCSER_RX_LONGFRM               _SB_MAKEMASK1(3)
+#define M_SYNCSER_RX_SHORTFRM              _SB_MAKEMASK1(4)
+#define M_SYNCSER_RX_OVERRUN               _SB_MAKEMASK1(5)
+#define M_SYNCSER_RX_SYNC_ERR              _SB_MAKEMASK1(6)
+#define M_SYNCSER_TX_CRCERR                _SB_MAKEMASK1(8)
+#define M_SYNCSER_TX_UNDERRUN              _SB_MAKEMASK1(9)
+#define M_SYNCSER_TX_SYNC_ERR              _SB_MAKEMASK1(10)
+#define M_SYNCSER_TX_PAUSE_COMPLETE        _SB_MAKEMASK1(11)
+#define M_SYNCSER_RX_EOP_COUNT             _SB_MAKEMASK1(16)
+#define M_SYNCSER_RX_EOP_TIMER             _SB_MAKEMASK1(17)
+#define M_SYNCSER_RX_EOP_SEEN              _SB_MAKEMASK1(18)
+#define M_SYNCSER_RX_HWM                   _SB_MAKEMASK1(19)
+#define M_SYNCSER_RX_LWM                   _SB_MAKEMASK1(20)
+#define M_SYNCSER_RX_DSCR                  _SB_MAKEMASK1(21)
+#define M_SYNCSER_RX_DERR                  _SB_MAKEMASK1(22)
+#define M_SYNCSER_TX_EOP_COUNT             _SB_MAKEMASK1(24)
+#define M_SYNCSER_TX_EOP_TIMER             _SB_MAKEMASK1(25)
+#define M_SYNCSER_TX_EOP_SEEN              _SB_MAKEMASK1(26)
+#define M_SYNCSER_TX_HWM                   _SB_MAKEMASK1(27)
+#define M_SYNCSER_TX_LWM                   _SB_MAKEMASK1(28)
+#define M_SYNCSER_TX_DSCR                  _SB_MAKEMASK1(29)
+#define M_SYNCSER_TX_DERR                  _SB_MAKEMASK1(30)
+#define M_SYNCSER_TX_DZERO                 _SB_MAKEMASK1(31)
+
+/*
+ * Sequencer Table Entry format
+ */
+
+#define M_SYNCSER_SEQ_LAST                 _SB_MAKEMASK1(0)
+#define M_SYNCSER_SEQ_BYTE                 _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_SEQ_COUNT                2
+#define M_SYNCSER_SEQ_COUNT                _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT)
+#define V_SYNCSER_SEQ_COUNT(x)             _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT)
+
+#define M_SYNCSER_SEQ_ENABLE               _SB_MAKEMASK1(6)
+#define M_SYNCSER_SEQ_STROBE               _SB_MAKEMASK1(7)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h
new file mode 100644
index 0000000..d835bf2
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_uart.h
@@ -0,0 +1,362 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *
+    *  UART Constants				File: sb1250_uart.h
+    *
+    *  This module contains constants and macros useful for
+    *  manipulating the SB1250's UARTs
+    *
+    *  SB1250 specification level:  User's manual 1/02/02
+    *
+    *********************************************************************
+    *
+    *  Copyright 2000,2001,2002,2003
+    *  Broadcom Corporation. All rights reserved.
+    *
+    *  This program is free software; you can redistribute it and/or
+    *  modify it under the terms of the GNU General Public License as
+    *  published by the Free Software Foundation; either version 2 of
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+#ifndef _SB1250_UART_H
+#define _SB1250_UART_H
+
+#include "sb1250_defs.h"
+
+/* **********************************************************************
+   * DUART Registers
+   ********************************************************************** */
+
+/*
+ * DUART Mode Register #1 (Table 10-3)
+ * Register: DUART_MODE_REG_1_A
+ * Register: DUART_MODE_REG_1_B
+ */
+
+#define S_DUART_BITS_PER_CHAR       0
+#define M_DUART_BITS_PER_CHAR       _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR)
+#define V_DUART_BITS_PER_CHAR(x)    _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR)
+
+#define K_DUART_BITS_PER_CHAR_RSV0  0
+#define K_DUART_BITS_PER_CHAR_RSV1  1
+#define K_DUART_BITS_PER_CHAR_7     2
+#define K_DUART_BITS_PER_CHAR_8     3
+
+#define V_DUART_BITS_PER_CHAR_RSV0  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
+#define V_DUART_BITS_PER_CHAR_RSV1  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
+#define V_DUART_BITS_PER_CHAR_7     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+
+
+#define M_DUART_PARITY_TYPE_EVEN    0x00
+#define M_DUART_PARITY_TYPE_ODD     _SB_MAKEMASK1(2)
+
+#define S_DUART_PARITY_MODE          3
+#define M_DUART_PARITY_MODE         _SB_MAKEMASK(2, S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x)      _SB_MAKEVALUE(x, S_DUART_PARITY_MODE)
+
+#define K_DUART_PARITY_MODE_ADD       0
+#define K_DUART_PARITY_MODE_ADD_FIXED 1
+#define K_DUART_PARITY_MODE_NONE      2
+
+#define V_DUART_PARITY_MODE_ADD       V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
+#define V_DUART_PARITY_MODE_NONE      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
+
+#define M_DUART_TX_IRQ_SEL_TXRDY    0
+#define M_DUART_TX_IRQ_SEL_TXEMPT   _SB_MAKEMASK1(5)
+
+#define M_DUART_RX_IRQ_SEL_RXRDY    0
+#define M_DUART_RX_IRQ_SEL_RXFULL   _SB_MAKEMASK1(6)
+
+#define M_DUART_RX_RTS_ENA          _SB_MAKEMASK1(7)
+
+/*
+ * DUART Mode Register #2 (Table 10-4)
+ * Register: DUART_MODE_REG_2_A
+ * Register: DUART_MODE_REG_2_B
+ */
+
+#define M_DUART_MODE_RESERVED1      _SB_MAKEMASK(3, 0)   /* ignored */
+
+#define M_DUART_STOP_BIT_LEN_2      _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1      0
+
+#define M_DUART_TX_CTS_ENA          _SB_MAKEMASK1(4)
+
+
+#define M_DUART_MODE_RESERVED2      _SB_MAKEMASK1(5)    /* must be zero */
+
+#define S_DUART_CHAN_MODE	    6
+#define M_DUART_CHAN_MODE           _SB_MAKEMASK(2, S_DUART_CHAN_MODE)
+#define V_DUART_CHAN_MODE(x)	    _SB_MAKEVALUE(x, S_DUART_CHAN_MODE)
+
+#define K_DUART_CHAN_MODE_NORMAL    0
+#define K_DUART_CHAN_MODE_LCL_LOOP  2
+#define K_DUART_CHAN_MODE_REM_LOOP  3
+
+#define V_DUART_CHAN_MODE_NORMAL    V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL)
+#define V_DUART_CHAN_MODE_LCL_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP)
+#define V_DUART_CHAN_MODE_REM_LOOP  V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP)
+
+/*
+ * DUART Command Register (Table 10-5)
+ * Register: DUART_CMD_A
+ * Register: DUART_CMD_B
+ */
+
+#define M_DUART_RX_EN               _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS              _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN               _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS              _SB_MAKEMASK1(3)
+
+#define S_DUART_MISC_CMD	    4
+#define M_DUART_MISC_CMD            _SB_MAKEMASK(3, S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x)         _SB_MAKEVALUE(x, S_DUART_MISC_CMD)
+
+#define K_DUART_MISC_CMD_NOACTION0       0
+#define K_DUART_MISC_CMD_NOACTION1       1
+#define K_DUART_MISC_CMD_RESET_RX        2
+#define K_DUART_MISC_CMD_RESET_TX        3
+#define K_DUART_MISC_CMD_NOACTION4       4
+#define K_DUART_MISC_CMD_RESET_BREAK_INT 5
+#define K_DUART_MISC_CMD_START_BREAK     6
+#define K_DUART_MISC_CMD_STOP_BREAK      7
+
+#define V_DUART_MISC_CMD_NOACTION0       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
+#define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+
+#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7)
+
+/*
+ * DUART Status Register (Table 10-6)
+ * Register: DUART_STATUS_A
+ * Register: DUART_STATUS_B
+ * READ-ONLY
+ */
+
+#define M_DUART_RX_RDY              _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL             _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY              _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT              _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR           _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR          _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR             _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Baud Rate Register (Table 10-7)
+ * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_B
+ */
+
+#define M_DUART_CLK_COUNTER         _SB_MAKEMASK(12, 0)
+#define V_DUART_BAUD_RATE(x)        (100000000/((x)*20)-1)
+
+/*
+ * DUART Data Registers (Table 10-8 and 10-9)
+ * Register: DUART_RX_HOLD_A
+ * Register: DUART_RX_HOLD_B
+ * Register: DUART_TX_HOLD_A
+ * Register: DUART_TX_HOLD_B
+ */
+
+#define M_DUART_RX_DATA             _SB_MAKEMASK(8, 0)
+#define M_DUART_TX_DATA             _SB_MAKEMASK(8, 0)
+
+/*
+ * DUART Input Port Register (Table 10-10)
+ * Register: DUART_IN_PORT
+ */
+
+#define M_DUART_IN_PIN0_VAL         _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL         _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL         _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL         _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL         _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL         _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN            _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN            _SB_MAKEMASK1(7)
+
+/*
+ * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
+ * Register: DUART_INPORT_CHNG
+ */
+
+#define S_DUART_IN_PIN_VAL          0
+#define M_DUART_IN_PIN_VAL          _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL)
+
+#define S_DUART_IN_PIN_CHNG         4
+#define M_DUART_IN_PIN_CHNG         _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG)
+
+
+/*
+ * DUART Output port control register (Table 10-14)
+ * Register: DUART_OPCR
+ */
+
+#define M_DUART_OPCR_RESERVED0      _SB_MAKEMASK1(0)   /* must be zero */
+#define M_DUART_OPC2_SEL            _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1      _SB_MAKEMASK1(2)   /* must be zero */
+#define M_DUART_OPC3_SEL            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2      _SB_MAKEMASK(4, 4)  /* must be zero */
+
+/*
+ * DUART Aux Control Register (Table 10-15)
+ * Register: DUART_AUX_CTRL
+ */
+
+#define M_DUART_IP0_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA        _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA        _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA        _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED        _SB_MAKEMASK(4, 4)
+
+#define M_DUART_CTS_CHNG_ENA        _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA        _SB_MAKEMASK1(2)
+
+/*
+ * DUART Interrupt Status Register (Table 10-16)
+ * Register: DUART_ISR
+ */
+
+#define M_DUART_ISR_TX_A            _SB_MAKEMASK1(0)
+
+#define S_DUART_ISR_RX_A            1
+#define M_DUART_ISR_RX_A            _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x)         _SB_MAKEVALUE(x, S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x)         _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A)
+
+#define M_DUART_ISR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL_A	    _SB_MAKEMASK(4, 0)
+
+#define M_DUART_ISR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_ISR_ALL_B	    _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Status Register (Table 10-17)
+ * DUART Channel B Interrupt Status Register (Table 10-18)
+ * Register: DUART_ISR_A
+ * Register: DUART_ISR_B
+ */
+
+#define M_DUART_ISR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL		    _SB_MAKEMASK(4, 0)
+#define M_DUART_ISR_RESERVED        _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Interrupt Mask Register (Table 10-19)
+ * Register: DUART_IMR
+ */
+
+#define M_DUART_IMR_TX_A            _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A            _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A           _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL_A	    _SB_MAKEMASK(4, 0)
+
+#define M_DUART_IMR_TX_B            _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B            _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B           _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B           _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Mask Register (Table 10-20)
+ * DUART Channel B Interrupt Mask Register (Table 10-21)
+ * Register: DUART_IMR_A
+ * Register: DUART_IMR_B
+ */
+
+#define M_DUART_IMR_TX              _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX              _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK             _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL		    _SB_MAKEMASK(4, 0)
+#define M_DUART_IMR_RESERVED        _SB_MAKEMASK(4, 4)
+
+
+/*
+ * DUART Output Port Set Register (Table 10-22)
+ * Register: DUART_SET_OPR
+ */
+
+#define M_DUART_SET_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED       _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port Clear Register (Table 10-23)
+ * Register: DUART_CLEAR_OPR
+ */
+
+#define M_DUART_CLR_OPR0            _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1            _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2            _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3            _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED       _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port RTS Register (Table 10-24)
+ * Register: DUART_OUT_PORT
+ */
+
+#define M_DUART_OUT_PIN_SET0        _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1        _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0        _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1        _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED       _SB_MAKEMASK(4, 4)
+
+#define M_DUART_OUT_PIN_SET(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
+#define M_DUART_OUT_PIN_CLR(chan) \
+    (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Full Interrupt Control Register
+ */
+
+#define S_DUART_SIG_FULL           _SB_MAKE64(0)
+#define M_DUART_SIG_FULL           _SB_MAKEMASK(4, S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x)        _SB_MAKEVALUE(x, S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x)        _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL)
+
+#define S_DUART_INT_TIME           _SB_MAKE64(4)
+#define M_DUART_INT_TIME           _SB_MAKEMASK(4, S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x)        _SB_MAKEVALUE(x, S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x)        _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/* ********************************************************************** */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h
new file mode 100644
index 0000000..64c4787
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sentosa.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SENTOSA_H
+#define __ASM_SIBYTE_SENTOSA_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SENTOSA
+#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)"
+#endif
+#ifdef CONFIG_SIBYTE_RHONE
+#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)"
+#endif
+
+/* Generic bus chip selects */
+#ifdef CONFIG_SIBYTE_RHONE
+#define LEDS_CS         6
+#define LEDS_PHYS       0x1d0a0000
+#endif
+
+/* GPIOs */
+#define K_GPIO_DBG_LED  0
+
+#endif /* __ASM_SIBYTE_SENTOSA_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
new file mode 100644
index 0000000..114d9d2
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SWARM_H
+#define __ASM_SIBYTE_SWARM_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SWARM
+#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#endif
+#ifdef CONFIG_SIBYTE_LITTLESUR
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "cfe0"
+#endif
+#ifdef CONFIG_SIBYTE_CRHONE
+#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+#ifdef CONFIG_SIBYTE_CRHINE
+#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE    0
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS         3
+#define LEDS_PHYS       0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS          4
+#define IDE_PHYS        0x100b0000
+#define K_GPIO_GB_IDE   4
+#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS       6
+#define PCMCIA_PHYS     0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_SWARM_H */
diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h
new file mode 100644
index 0000000..9ce0607
--- /dev/null
+++ b/arch/mips/include/asm/sigcontext.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ */
+struct sigcontext {
+	unsigned int		sc_regmask;	/* Unused */
+	unsigned int		sc_status;	/* Unused */
+	unsigned long long	sc_pc;
+	unsigned long long	sc_regs[32];
+	unsigned long long	sc_fpregs[32];
+	unsigned int		sc_acx;		/* Was sc_ownedfp */
+	unsigned int		sc_fpc_csr;
+	unsigned int		sc_fpc_eir;	/* Unused */
+	unsigned int		sc_used_math;
+	unsigned int		sc_dsp;		/* dsp status, was sc_ssflags */
+	unsigned long long	sc_mdhi;
+	unsigned long long	sc_mdlo;
+	unsigned long		sc_hi1;		/* Was sc_cause */
+	unsigned long		sc_lo1;		/* Was sc_badvaddr */
+	unsigned long		sc_hi2;		/* Was sc_sigset[4] */
+	unsigned long		sc_lo2;
+	unsigned long		sc_hi3;
+	unsigned long		sc_lo3;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#include <linux/posix_types.h>
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ *
+ * Warning: this structure illdefined with sc_badvaddr being just an unsigned
+ * int so it was changed to unsigned long in 2.6.0-test1.  This may break
+ * binary compatibility - no prisoners.
+ * DSP ASE in 2.6.12-rc4.  Turn sc_mdhi and sc_mdlo into an array of four
+ * entries, add sc_dsp and sc_reserved for padding.  No prisoners.
+ */
+struct sigcontext {
+	__u64	sc_regs[32];
+	__u64	sc_fpregs[32];
+	__u64	sc_mdhi;
+	__u64	sc_hi1;
+	__u64	sc_hi2;
+	__u64	sc_hi3;
+	__u64	sc_mdlo;
+	__u64	sc_lo1;
+	__u64	sc_lo2;
+	__u64	sc_lo3;
+	__u64	sc_pc;
+	__u32	sc_fpc_csr;
+	__u32	sc_used_math;
+	__u32	sc_dsp;
+	__u32	sc_reserved;
+};
+
+#ifdef __KERNEL__
+
+struct sigcontext32 {
+	__u32		sc_regmask;	/* Unused */
+	__u32		sc_status;	/* Unused */
+	__u64		sc_pc;
+	__u64		sc_regs[32];
+	__u64		sc_fpregs[32];
+	__u32		sc_acx;		/* Only MIPS32; was sc_ownedfp */
+	__u32		sc_fpc_csr;
+	__u32		sc_fpc_eir;	/* Unused */
+	__u32		sc_used_math;
+	__u32		sc_dsp;		/* dsp status, was sc_ssflags */
+	__u64		sc_mdhi;
+	__u64		sc_mdlo;
+	__u32		sc_hi1;		/* Was sc_cause */
+	__u32		sc_lo1;		/* Was sc_badvaddr */
+	__u32		sc_hi2;		/* Was sc_sigset[4] */
+	__u32		sc_lo2;
+	__u32		sc_hi3;
+	__u32		sc_lo3;
+};
+#endif /* __KERNEL__ */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
new file mode 100644
index 0000000..96e28f1
--- /dev/null
+++ b/arch/mips/include/asm/siginfo.h
@@ -0,0 +1,130 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+
+#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
+#undef __ARCH_SI_TRAPNO	/* exception code needs to fill this ...  */
+
+#define HAVE_ARCH_SIGINFO_T
+
+/*
+ * We duplicate the generic versions - <asm-generic/siginfo.h> is just borked
+ * by design ...
+ */
+#define HAVE_ARCH_COPY_SIGINFO
+struct siginfo;
+
+/*
+ * Careful to keep union _sifields from shifting ...
+ */
+#ifdef CONFIG_32BIT
+#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
+#endif
+#ifdef CONFIG_64BIT
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+	int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3];
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			clock_t _utime;
+			int _status;		/* exit code */
+			clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+/*
+ * si_code values
+ * Again these have been choosen to be IRIX compatible.
+ */
+#undef SI_ASYNCIO
+#undef SI_TIMER
+#undef SI_MESGQ
+#define SI_ASYNCIO	-2	/* sent by AIO completion */
+#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
+
+#ifdef __KERNEL__
+
+/*
+ * Duplicated here because of <asm-generic/siginfo.h> braindamage ...
+ */
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+#endif /* _ASM_SIGINFO_H */
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
new file mode 100644
index 0000000..bee5153
--- /dev/null
+++ b/arch/mips/include/asm/signal.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		128
+#define _NSIG_BPW	(sizeof(unsigned long) * 8)
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+#define SIGHUP		 1	/* Hangup (POSIX).  */
+#define SIGINT		 2	/* Interrupt (ANSI).  */
+#define SIGQUIT		 3	/* Quit (POSIX).  */
+#define SIGILL		 4	/* Illegal instruction (ANSI).  */
+#define SIGTRAP		 5	/* Trace trap (POSIX).  */
+#define SIGIOT		 6	/* IOT trap (4.2 BSD).  */
+#define SIGABRT		 SIGIOT	/* Abort (ANSI).  */
+#define SIGEMT		 7
+#define SIGFPE		 8	/* Floating-point exception (ANSI).  */
+#define SIGKILL		 9	/* Kill, unblockable (POSIX).  */
+#define SIGBUS		10	/* BUS error (4.2 BSD).  */
+#define SIGSEGV		11	/* Segmentation violation (ANSI).  */
+#define SIGSYS		12
+#define SIGPIPE		13	/* Broken pipe (POSIX).  */
+#define SIGALRM		14	/* Alarm clock (POSIX).  */
+#define SIGTERM		15	/* Termination (ANSI).  */
+#define SIGUSR1		16	/* User-defined signal 1 (POSIX).  */
+#define SIGUSR2		17	/* User-defined signal 2 (POSIX).  */
+#define SIGCHLD		18	/* Child status has changed (POSIX).  */
+#define SIGCLD		SIGCHLD	/* Same as SIGCHLD (System V).  */
+#define SIGPWR		19	/* Power failure restart (System V).  */
+#define SIGWINCH	20	/* Window size change (4.3 BSD, Sun).  */
+#define SIGURG		21	/* Urgent condition on socket (4.2 BSD).  */
+#define SIGIO		22	/* I/O now possible (4.2 BSD).  */
+#define SIGPOLL		SIGIO	/* Pollable event occurred (System V).  */
+#define SIGSTOP		23	/* Stop, unblockable (POSIX).  */
+#define SIGTSTP		24	/* Keyboard stop (POSIX).  */
+#define SIGCONT		25	/* Continue (POSIX).  */
+#define SIGTTIN		26	/* Background read from tty (POSIX).  */
+#define SIGTTOU		27	/* Background write to tty (POSIX).  */
+#define SIGVTALRM	28	/* Virtual alarm clock (4.2 BSD).  */
+#define SIGPROF		29	/* Profiling alarm clock (4.2 BSD).  */
+#define SIGXCPU		30	/* CPU limit exceeded (4.2 BSD).  */
+#define SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).  */
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK	0x08000000
+#define SA_RESETHAND	0x80000000
+#define SA_RESTART	0x10000000
+#define SA_SIGINFO	0x00000008
+#define SA_NODEFER	0x40000000
+#define SA_NOCLDWAIT	0x00010000
+#define SA_NOCLDSTOP	0x00000001
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000	/* Only for o32 */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK     1
+#define SS_DISABLE     2
+
+#define MINSIGSTKSZ    2048
+#define SIGSTKSZ       8192
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_TRAD_SIGNALS
+#define sig_uses_siginfo(ka)	((ka)->sa.sa_flags & SA_SIGINFO)
+#else
+#define sig_uses_siginfo(ka)	(1)
+#endif
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK	1	/* for blocking signals */
+#define SIG_UNBLOCK	2	/* for unblocking signals */
+#define SIG_SETMASK	3	/* for setting the signal mask */
+
+#include <asm-generic/signal.h>
+
+struct sigaction {
+	unsigned int	sa_flags;
+	__sighandler_t	sa_handler;
+	sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+/* IRIX compatible stack_t  */
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	size_t ss_size;
+	int ss_flags;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#include <asm/siginfo.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mips/include/asm/sim.h b/arch/mips/include/asm/sim.h
new file mode 100644
index 0000000..0cd719f
--- /dev/null
+++ b/arch/mips/include/asm/sim.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIM_H
+#define _ASM_SIM_H
+
+
+#include <asm/asm-offsets.h>
+
+#define __str2(x) #x
+#define __str(x) __str2(x)
+
+#ifdef CONFIG_32BIT
+
+#define save_static_function(symbol)					\
+__asm__(								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sw\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sw\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sw\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sw\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sw\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sw\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sw\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sw\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define save_static_function(symbol)					\
+__asm__(								\
+	".text\n\t"							\
+	".globl\t" #symbol "\n\t"					\
+	".align\t2\n\t"							\
+	".type\t" #symbol ", @function\n\t"				\
+	".ent\t" #symbol ", 0\n"					\
+	#symbol":\n\t"							\
+	".frame\t$29, 0, $31\n\t"					\
+	"sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t"	\
+	"sd\t$17,"__str(PT_R17)"($29)\n\t"				\
+	"sd\t$18,"__str(PT_R18)"($29)\n\t"				\
+	"sd\t$19,"__str(PT_R19)"($29)\n\t"				\
+	"sd\t$20,"__str(PT_R20)"($29)\n\t"				\
+	"sd\t$21,"__str(PT_R21)"($29)\n\t"				\
+	"sd\t$22,"__str(PT_R22)"($29)\n\t"				\
+	"sd\t$23,"__str(PT_R23)"($29)\n\t"				\
+	"sd\t$30,"__str(PT_R30)"($29)\n\t"				\
+	"j\t_" #symbol "\n\t"						\
+	".end\t" #symbol "\n\t"						\
+	".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs							\
+	unsigned long __dummy0,						\
+	unsigned long __dummy1,						\
+	unsigned long __dummy2,						\
+	unsigned long __dummy3,						\
+	unsigned long __dummy4,						\
+	unsigned long __dummy5,						\
+	unsigned long __dummy6,						\
+	unsigned long __dummy7,
+
+#endif /* CONFIG_64BIT */
+
+#endif /* _ASM_SIM_H */
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
new file mode 100644
index 0000000..43c207e7
--- /dev/null
+++ b/arch/mips/include/asm/smp-ops.h
@@ -0,0 +1,57 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_OPS_H
+#define __ASM_SMP_OPS_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct plat_smp_ops {
+	void (*send_ipi_single)(int cpu, unsigned int action);
+	void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+	void (*init_secondary)(void);
+	void (*smp_finish)(void);
+	void (*cpus_done)(void);
+	void (*boot_secondary)(int cpu, struct task_struct *idle);
+	void (*smp_setup)(void);
+	void (*prepare_cpus)(unsigned int max_cpus);
+};
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+static inline void plat_smp_setup(void)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->smp_setup();
+}
+
+#else /* !CONFIG_SMP */
+
+struct plat_smp_ops;
+
+static inline void plat_smp_setup(void)
+{
+	/* UP, nothing to do ...  */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+#endif /* !CONFIG_SMP */
+
+extern struct plat_smp_ops up_smp_ops;
+extern struct plat_smp_ops cmp_smp_ops;
+extern struct plat_smp_ops vsmp_smp_ops;
+
+#endif /* __ASM_SMP_OPS_H */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
new file mode 100644
index 0000000..0ff5b52
--- /dev/null
+++ b/arch/mips/include/asm/smp.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+
+#include <asm/atomic.h>
+#include <asm/smp-ops.h>
+
+extern int smp_num_siblings;
+extern cpumask_t cpu_sibling_map[];
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/* Map from cpu id to sequential logical cpu number.  This will only
+   not be idempotent when cpus failed to come on-line.  */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+#define NO_PROC_ID	(-1)
+
+#define SMP_RESCHEDULE_YOURSELF	0x1	/* XXX braindead */
+#define SMP_CALL_FUNCTION	0x2
+
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map	phys_cpu_present_map
+
+extern void asmlinkage smp_bootstrap(void);
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static inline void smp_send_reschedule(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
+}
+
+extern asmlinkage void smp_call_function_interrupt(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h
new file mode 100644
index 0000000..ea60bf0
--- /dev/null
+++ b/arch/mips/include/asm/smtc.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_SMTC_MT_H
+#define _ASM_SMTC_MT_H
+
+/*
+ * Definitions for SMTC multitasking on MIPS MT cores
+ */
+
+#include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
+
+/*
+ * System-wide SMTC status information
+ */
+
+extern unsigned int smtc_status;
+
+#define SMTC_TLB_SHARED	0x00000001
+#define SMTC_MTC_ACTIVE	0x00000002
+
+/*
+ * TLB/ASID Management information
+ */
+
+#define MAX_SMTC_TLBS 2
+#define MAX_SMTC_ASIDS 256
+#if NR_CPUS <= 8
+typedef char asiduse;
+#else
+#if NR_CPUS <= 16
+typedef short asiduse;
+#else
+typedef long asiduse;
+#endif
+#endif
+
+extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+struct mm_struct;
+struct task_struct;
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
+void self_ipi(struct smtc_ipi *);
+void smtc_flush_tlb_asid(unsigned long asid);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
+extern void smtc_smp_finish(void);
+extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+extern void smtc_cpus_done(void);
+
+
+/*
+ * Sharing the TLB between multiple VPEs means that the
+ * "random" index selection function is not allowed to
+ * select the current value of the Index register. To
+ * avoid additional TLB pressure, the Index registers
+ * are "parked" with an non-Valid value.
+ */
+
+#define PARKED_INDEX	((unsigned int)0x80000000)
+
+/*
+ * Define low-level interrupt mask for IPIs, if necessary.
+ * By default, use SW interrupt 1, which requires no external
+ * hardware support, but which works only for single-core
+ * MIPS MT systems.
+ */
+#ifndef MIPS_CPU_IPI_IRQ
+#define MIPS_CPU_IPI_IRQ 1
+#endif
+
+#endif /*  _ASM_SMTC_MT_H */
diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h
new file mode 100644
index 0000000..8ce5175
--- /dev/null
+++ b/arch/mips/include/asm/smtc_ipi.h
@@ -0,0 +1,128 @@
+/*
+ * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
+ */
+#ifndef __ASM_SMTC_IPI_H
+#define __ASM_SMTC_IPI_H
+
+#include <linux/spinlock.h>
+
+//#define SMTC_IPI_DEBUG
+
+#ifdef SMTC_IPI_DEBUG
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#endif /* SMTC_IPI_DEBUG */
+
+/*
+ * An IPI "message"
+ */
+
+struct smtc_ipi {
+	struct smtc_ipi *flink;
+	int type;
+	void *arg;
+	int dest;
+#ifdef	SMTC_IPI_DEBUG
+	int sender;
+	long stamp;
+#endif /* SMTC_IPI_DEBUG */
+};
+
+/*
+ * Defined IPI Types
+ */
+
+#define LINUX_SMP_IPI 1
+#define SMTC_CLOCK_TICK 2
+#define IRQ_AFFINITY_IPI 3
+
+/*
+ * A queue of IPI messages
+ */
+
+struct smtc_ipi_q {
+	struct smtc_ipi *head;
+	spinlock_t lock;
+	struct smtc_ipi *tail;
+	int depth;
+};
+
+static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL)
+		q->head = q->tail = p;
+	else
+		q->tail->flink = p;
+	p->flink = NULL;
+	q->tail = p;
+	q->depth++;
+#ifdef	SMTC_IPI_DEBUG
+	p->sender = read_c0_tcbind();
+	p->stamp = read_c0_count();
+#endif /* SMTC_IPI_DEBUG */
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+	struct smtc_ipi *p;
+
+	if (q->head == NULL)
+		p = NULL;
+	else {
+		p = q->head;
+		q->head = q->head->flink;
+		q->depth--;
+		/* Arguably unnecessary, but leaves queue cleaner */
+		if (q->head == NULL)
+			q->tail = NULL;
+	}
+
+	return p;
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+	unsigned long flags;
+	struct smtc_ipi *p;
+
+	spin_lock_irqsave(&q->lock, flags);
+	p = __smtc_ipi_dq(q);
+	spin_unlock_irqrestore(&q->lock, flags);
+
+	return p;
+}
+
+static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL) {
+		q->head = q->tail = p;
+		p->flink = NULL;
+	} else {
+		p->flink = q->head;
+		q->head = p;
+	}
+	q->depth++;
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
+{
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&q->lock, flags);
+	retval = q->depth;
+	spin_unlock_irqrestore(&q->lock, flags);
+	return retval;
+}
+
+extern void smtc_send_ipi(int cpu, int type, unsigned int action);
+
+#endif /* __ASM_SMTC_IPI_H */
diff --git a/arch/mips/include/asm/smtc_proc.h b/arch/mips/include/asm/smtc_proc.h
new file mode 100644
index 0000000..25da651
--- /dev/null
+++ b/arch/mips/include/asm/smtc_proc.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for SMTC /proc entries
+ * Copyright(C) 2005 MIPS Technologies Inc.
+ */
+#ifndef __ASM_SMTC_PROC_H
+#define __ASM_SMTC_PROC_H
+
+/*
+ * per-"CPU" statistics
+ */
+
+struct smtc_cpu_proc {
+	unsigned long timerints;
+	unsigned long selfipis;
+};
+
+extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+/* Count of number of recoveries of "stolen" FPU access rights on 34K */
+
+extern atomic_t smtc_fpu_recoveries;
+
+#endif /* __ASM_SMTC_PROC_H */
diff --git a/arch/mips/include/asm/smvp.h b/arch/mips/include/asm/smvp.h
new file mode 100644
index 0000000..0d0e80a
--- /dev/null
+++ b/arch/mips/include/asm/smvp.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_SMVP_H
+#define _ASM_SMVP_H
+
+/*
+ * Definitions for SMVP multitasking on MIPS MT cores
+ */
+struct task_struct;
+
+extern void smvp_smp_setup(void);
+extern void smvp_smp_finish(void);
+extern void smvp_boot_secondary(int cpu, struct task_struct *t);
+extern void smvp_init_secondary(void);
+extern void smvp_smp_finish(void);
+extern void smvp_cpus_done(void);
+extern void smvp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void smvp_send_ipi(int cpu, unsigned int action);
+#endif /*  _ASM_SMVP_H */
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
new file mode 100644
index 0000000..fec9bdd
--- /dev/null
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -0,0 +1,430 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_ADDRS_H
+#define _ASM_SN_ADDRS_H
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/addrspace.h>
+#include <asm/sn/kldir.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/addrs.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/addrs.h>
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+#define PS_UINT_CAST		(unsigned long)
+#define UINT64_CAST		(unsigned long)
+
+#define HUBREG_CAST		(volatile hubreg_t *)
+
+#else /* __ASSEMBLY__ */
+
+#define PS_UINT_CAST
+#define UINT64_CAST
+#define HUBREG_CAST
+
+#endif /* __ASSEMBLY__ */
+
+
+#define NASID_GET_META(_n)	((_n) >> NASID_LOCAL_BITS)
+#ifdef CONFIG_SGI_IP27
+#define NASID_GET_LOCAL(_n)	((_n) & 0xf)
+#endif
+#define NASID_MAKE(_m, _l)	(((_m) << NASID_LOCAL_BITS) | (_l))
+
+#define NODE_ADDRSPACE_MASK	(NODE_ADDRSPACE_SIZE - 1)
+#define TO_NODE_ADDRSPACE(_pa)	(UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK)
+
+#define CHANGE_ADDR_NASID(_pa, _nasid)	\
+		((UINT64_CAST(_pa) & ~NASID_MASK) | \
+		 (UINT64_CAST(_nasid) <<  NASID_SHFT))
+
+
+/*
+ * The following macros are used to index to the beginning of a specific
+ * node's address space.
+ */
+
+#define NODE_OFFSET(_n)		(UINT64_CAST (_n) << NODE_SIZE_BITS)
+
+#define NODE_CAC_BASE(_n)	(CAC_BASE   + NODE_OFFSET(_n))
+#define NODE_HSPEC_BASE(_n)	(HSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_IO_BASE(_n)	(IO_BASE    + NODE_OFFSET(_n))
+#define NODE_MSPEC_BASE(_n)	(MSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_UNCAC_BASE(_n)	(UNCAC_BASE + NODE_OFFSET(_n))
+
+#define TO_NODE(_n, _x)		(NODE_OFFSET(_n)     | ((_x)		   ))
+#define TO_NODE_CAC(_n, _x)	(NODE_CAC_BASE(_n)   | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_UNCAC(_n, _x)	(NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_MSPEC(_n, _x)	(NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_HSPEC(_n, _x)	(NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+
+
+#define RAW_NODE_SWIN_BASE(nasid, widget)				\
+	(NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+
+#define WIDGETID_GET(addr)	((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff))
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS		24
+#define SWIN_SIZE		(UINT64_CAST 1 << 24)
+#define	SWIN_SIZEMASK		(SWIN_SIZE - 1)
+#define	SWIN_WIDGET_MASK	0xF
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
+#define	SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to small window address on node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+#define	NODE_SWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_SWIN_BASE(nasid, 0))  && \
+		 ((addr) <  (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
+		 ))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN.
+ *	UALIAS -- 256MB in size, reads in the UALIAS result in
+ *			uncached references to the memory of the reader's node.
+ *	CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped
+ *			depending on which CPU does the access to provide
+ *			all CPUs with unique uncached memory at low addresses.
+ *	LBOOT  -- 256MB in size, reads in the LBOOT area result in
+ *			uncached references to the local hub's boot prom and
+ *			other directory-bus connected devices.
+ *	IALIAS -- 8MB in size, reads in the IALIAS result in uncached
+ *			references to the local hub's registers.
+ */
+
+#define UALIAS_BASE		HSPEC_BASE
+#define UALIAS_SIZE		0x10000000	/* 256 Megabytes */
+#define UALIAS_LIMIT		(UALIAS_BASE + UALIAS_SIZE)
+
+/*
+ * The bottom of ualias space is flipped depending on whether you're
+ * processor 0 or 1 within a node.
+ */
+#ifdef CONFIG_SGI_IP27
+#define UALIAS_FLIP_BASE	UALIAS_BASE
+#define UALIAS_FLIP_SIZE	0x20000
+#define UALIAS_FLIP_BIT		0x10000
+#define UALIAS_FLIP_ADDR(_x)	(cputoslice(smp_processor_id()) ? \
+				 (_x) ^ UALIAS_FLIP_BIT : (_x))
+
+#define LBOOT_BASE		(HSPEC_BASE + 0x10000000)
+#define LBOOT_SIZE		0x10000000
+#define LBOOT_LIMIT		(LBOOT_BASE + LBOOT_SIZE)
+#define LBOOT_STRIDE		0		/* IP27 has only one CPU PROM */
+
+#endif
+
+#define	HUB_REGISTER_WIDGET	1
+#define IALIAS_BASE		NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
+#define IALIAS_SIZE		0x800000	/* 8 Megabytes */
+#define IS_IALIAS(_a)		(((_a) >= IALIAS_BASE) &&		\
+				 ((_a) < (IALIAS_BASE + IALIAS_SIZE)))
+
+/*
+ * Macro for referring to Hub's RBOOT space
+ */
+
+#ifdef CONFIG_SGI_IP27
+#define RBOOT_SIZE		0x10000000	/* 256 Megabytes */
+#define NODE_RBOOT_BASE(_n)	(NODE_HSPEC_BASE(_n) + 0x30000000)
+#define NODE_RBOOT_LIMIT(_n)	(NODE_RBOOT_BASE(_n) + RBOOT_SIZE)
+
+#endif
+
+/*
+ * Macros for referring the Hub's back door space
+ *
+ *   These macros correctly process addresses in any node's space.
+ *   WARNING: They won't work in assembler.
+ *
+ *   BDDIR_ENTRY_LO returns the address of the low double-word of the dir
+ *                  entry corresponding to a physical (Cac or Uncac) address.
+ *   BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
+ *   BDPRT_ENTRY    returns the address of the double-word protection entry
+ *                  corresponding to the page containing the physical address.
+ *   BDPRT_ENTRY_S  Stores the value into the protection entry.
+ *   BDPRT_ENTRY_L  Load the value from the protection entry.
+ *   BDECC_ENTRY    returns the address of the ECC byte corresponding to a
+ *                  double-word at a specified physical address.
+ *   BDECC_ENTRY_H  returns the address of the two ECC bytes corresponding to a
+ *                  quad-word at a specified physical address.
+ */
+#define NODE_BDOOR_BASE(_n)	(NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
+
+#define NODE_BDECC_BASE(_n)	(NODE_BDOOR_BASE(_n))
+#define NODE_BDDIR_BASE(_n)	(NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4))
+#ifdef CONFIG_SGI_IP27
+#define BDDIR_ENTRY_LO(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x200)				    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDDIR_ENTRY_HI(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
+				  0x208)				    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDPRT_ENTRY(_pa, _rgn)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE * 3 / 4)		    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
+				 (_rgn) << 3)
+#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn)))
+#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val))
+#define BDPRT_ENTRY_L(_pa, _rgn)	(*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn)))
+
+#define BDECC_ENTRY(_pa)	((HSPEC_BASE +				      \
+				  NODE_ADDRSPACE_SIZE / 2)		    | \
+				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
+				 UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK  | \
+				 UINT64_CAST(_pa) >> 3 & 3)
+
+/*
+ * Macro to convert a back door directory or protection address into the
+ *   raw physical address of the associated cache line or protection page.
+ */
+#define BDADDR_IS_DIR(_ba)	((UINT64_CAST  (_ba) & 0x200) != 0)
+#define BDADDR_IS_PRT(_ba)	((UINT64_CAST  (_ba) & 0x200) == 0)
+
+#define BDDIR_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK            | \
+				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2  | \
+				 (UINT64_CAST(_ba) & 0x1f << 4) << 3)
+
+#define BDPRT_TO_MEM(_ba) 	(UINT64_CAST (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
+
+#define BDECC_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK	    | \
+				 (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2  | \
+				 (UINT64_CAST(_ba) & 3) << 3)
+#endif /* CONFIG_SGI_IP27 */
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers.  The LOCAL_HUB_* macros produce the appropriate
+ * address for the local registers.  The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for _x.
+ */
+
+/*
+ * WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+#define LOCAL_HUB_ADDR(_x)	(HUBREG_CAST (IALIAS_BASE + (_x)))
+#define REMOTE_HUB_ADDR(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#ifdef CONFIG_SGI_IP27
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+					      0x800000 + (_x)))
+#endif /* CONFIG_SGI_IP27 */
+
+#ifndef __ASSEMBLY__
+
+#define HUB_L(_a)			*(_a)
+#define	HUB_S(_a, _d)			*(_a) = (_d)
+
+#define LOCAL_HUB_L(_r)			HUB_L(LOCAL_HUB_ADDR(_r))
+#define LOCAL_HUB_S(_r, _d)		HUB_S(LOCAL_HUB_ADDR(_r), (_d))
+#define REMOTE_HUB_L(_n, _r)		HUB_L(REMOTE_HUB_ADDR((_n), (_r)))
+#define REMOTE_HUB_S(_n, _r, _d)	HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d))
+#define REMOTE_HUB_PI_L(_n, _sn, _r)	HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)))
+#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The following macros are used to get to a hub/bridge register, given
+ * the base of the register space.
+ */
+#define HUB_REG_PTR(_base, _off)	\
+	(HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define HUB_REG_PTR_L(_base, _off)	\
+	HUB_L(HUB_REG_PTR((_base), (_off)))
+
+#define HUB_REG_PTR_S(_base, _off, _data)	\
+	HUB_S(HUB_REG_PTR((_base), (_off)), (_data))
+
+/*
+ * Software structure locations -- permanently fixed
+ *    See diagram in kldir.h
+ */
+
+#define PHYS_RAMBASE		0x0
+#define K0_RAMBASE		PHYS_TO_K0(PHYS_RAMBASE)
+
+#define EX_HANDLER_OFFSET(slice) ((slice) << 16)
+#define EX_HANDLER_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice))
+#define EX_HANDLER_SIZE		0x0400
+
+#define EX_FRAME_OFFSET(slice)	((slice) << 16 | 0x400)
+#define EX_FRAME_ADDR(nasid, slice)					\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice))
+#define EX_FRAME_SIZE		0x0c00
+
+#define ARCS_SPB_OFFSET		0x1000
+#define ARCS_SPB_ADDR(nasid)						\
+	PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
+#define ARCS_SPB_SIZE		0x0400
+
+#define KLDIR_OFFSET		0x2000
+#define KLDIR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
+#define KLDIR_SIZE		0x0400
+
+
+/*
+ * Software structure locations -- indirected through KLDIR
+ *    See diagram in kldir.h
+ *
+ * Important:	All low memory structures must only be accessed
+ *		uncached, except for the symmon stacks.
+ */
+
+#define KLI_LAUNCH		0		/* Dir. entries */
+#define KLI_KLCONFIG		1
+#define	KLI_NMI			2
+#define KLI_GDA			3
+#define KLI_FREEMEM		4
+#define	KLI_SYMMON_STK		5
+#define KLI_PI_ERROR		6
+#define KLI_KERN_VARS		7
+#define	KLI_KERN_XP		8
+#define	KLI_KERN_PARTID		9
+
+#ifndef __ASSEMBLY__
+
+#define KLD_BASE(nasid)		((kldir_ent_t *) KLDIR_ADDR(nasid))
+#define KLD_LAUNCH(nasid)	(KLD_BASE(nasid) + KLI_LAUNCH)
+#define KLD_NMI(nasid)		(KLD_BASE(nasid) + KLI_NMI)
+#define KLD_KLCONFIG(nasid)	(KLD_BASE(nasid) + KLI_KLCONFIG)
+#define KLD_PI_ERROR(nasid)	(KLD_BASE(nasid) + KLI_PI_ERROR)
+#define KLD_GDA(nasid)		(KLD_BASE(nasid) + KLI_GDA)
+#define KLD_SYMMON_STK(nasid)	(KLD_BASE(nasid) + KLI_SYMMON_STK)
+#define KLD_FREEMEM(nasid)	(KLD_BASE(nasid) + KLI_FREEMEM)
+#define KLD_KERN_VARS(nasid)	(KLD_BASE(nasid) + KLI_KERN_VARS)
+#define	KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
+#define	KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
+
+#define LAUNCH_OFFSET(nasid, slice)					\
+	(KLD_LAUNCH(nasid)->offset +					\
+	 KLD_LAUNCH(nasid)->stride * (slice))
+#define LAUNCH_ADDR(nasid, slice)					\
+	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
+#define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
+
+#define NMI_OFFSET(nasid, slice)					\
+	(KLD_NMI(nasid)->offset +					\
+	 KLD_NMI(nasid)->stride * (slice))
+#define NMI_ADDR(nasid, slice)						\
+	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+#define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
+
+#define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
+#define KLCONFIG_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid))
+#define KLCONFIG_SIZE(nasid)	KLD_KLCONFIG(nasid)->size
+
+#define GDA_ADDR(nasid)		KLD_GDA(nasid)->pointer
+#define GDA_SIZE(nasid)		KLD_GDA(nasid)->size
+
+#define SYMMON_STK_OFFSET(nasid, slice)					\
+	(KLD_SYMMON_STK(nasid)->offset +				\
+	 KLD_SYMMON_STK(nasid)->stride * (slice))
+#define SYMMON_STK_STRIDE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_ADDR(nasid, slice)					\
+	TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice))
+
+#define SYMMON_STK_SIZE(nasid)	KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_END(nasid)	(SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size)
+
+/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
+ * relocatable program
+ */
+#define	UNIX_DEBUG_LOADADDR	0x300000
+#define	SYMMON_LOADADDR(nasid)						\
+	TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
+
+#define FREEMEM_OFFSET(nasid)	KLD_FREEMEM(nasid)->offset
+#define FREEMEM_ADDR(nasid)	SYMMON_STK_END(nasid)
+/*
+ * XXX
+ * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded.
+ * Also, it should take into account what prom thinks to be a safe
+ * address
+	PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid))
+ */
+#define FREEMEM_SIZE(nasid)	KLD_FREEMEM(nasid)->size
+
+#define PI_ERROR_OFFSET(nasid)	KLD_PI_ERROR(nasid)->offset
+#define PI_ERROR_ADDR(nasid)						\
+	TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid))
+#define PI_ERROR_SIZE(nasid)	KLD_PI_ERROR(nasid)->size
+
+#define NODE_OFFSET_TO_K0(_nasid, _off)					\
+	PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE)
+#define NODE_OFFSET_TO_K1(_nasid, _off)					\
+	TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE)
+#define K0_TO_NODE_OFFSET(_k0addr)					\
+	((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK)
+
+#define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
+#define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
+
+#define	KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
+#define	KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
+
+#define GPDA_ADDR(nasid)	TO_NODE_CAC(nasid, GPDA_OFFSET)
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_SN_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h
new file mode 100644
index 0000000..ac4ea85
--- /dev/null
+++ b/arch/mips/include/asm/sn/agent.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file has definitions for the hub and snac interfaces.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGI_SN_AGENT_H
+#define _ASM_SGI_SN_AGENT_H
+
+#include <linux/topology.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hub.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/hub.h>
+#endif	/* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+/*
+ * NIC register macros
+ */
+
+#if defined(CONFIG_SGI_IP27)
+#define HUB_NIC_ADDR(_cpuid) 						   \
+	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),       \
+		MD_MLAN_CTL)
+#endif
+
+#define SET_HUB_NIC(_my_cpuid, _val) 				  	   \
+	(HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val)))
+
+#define SET_MY_HUB_NIC(_v) 					           \
+	SET_HUB_NIC(cpuid(), (_v))
+
+#define GET_HUB_NIC(_my_cpuid) 						   \
+	(HUB_L(HUB_NIC_ADDR(_my_cpuid)))
+
+#define GET_MY_HUB_NIC() 						   \
+	GET_HUB_NIC(cpuid())
+
+#endif /* _ASM_SGI_SN_AGENT_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
new file mode 100644
index 0000000..bd75945
--- /dev/null
+++ b/arch/mips/include/asm/sn/arch.h
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_ARCH_H
+#define _ASM_SN_ARCH_H
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/arch.h>
+#endif
+
+typedef u64	hubreg_t;
+
+#define cputonasid(cpu)		(sn_cpu_info[(cpu)].p_nasid)
+#define cputoslice(cpu)		(sn_cpu_info[(cpu)].p_slice)
+#define makespnum(_nasid, _slice)					\
+		(((_nasid) << CPUS_PER_NODE_SHFT) | (_slice))
+
+#define INVALID_NASID		(nasid_t)-1
+#define INVALID_CNODEID		(cnodeid_t)-1
+#define INVALID_PNODEID		(pnodeid_t)-1
+#define INVALID_MODULE		(moduleid_t)-1
+#define	INVALID_PARTID		(partid_t)-1
+
+extern nasid_t get_nasid(void);
+extern cnodeid_t get_cpu_cnode(cpuid_t);
+extern int get_cpu_slice(cpuid_t);
+
+/*
+ * NO ONE should access these arrays directly.  The only reason we refer to
+ * them here is to avoid the procedure call that would be required in the
+ * macros below.  (Really want private data members here :-)
+ */
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+
+/*
+ * These macros are used by various parts of the kernel to convert
+ * between the three different kinds of node numbering.   At least some
+ * of them may change to procedure calls in the future, but the macros
+ * will continue to work.  Don't use the arrays above directly.
+ */
+
+#define	NASID_TO_REGION(nnode)	      	\
+    ((nnode) >> \
+     (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT))
+
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+extern cnodeid_t cpuid_to_compact_node[MAXCPUS];
+
+#define NASID_TO_COMPACT_NODEID(nnode)	(nasid_to_compact_node[nnode])
+#define COMPACT_TO_NASID_NODEID(cnode)	(compact_to_nasid_node[cnode])
+#define CPUID_TO_COMPACT_NODEID(cpu)	(cpuid_to_compact_node[(cpu)])
+
+#endif /* _ASM_SN_ARCH_H */
diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h
new file mode 100644
index 0000000..b3e3606
--- /dev/null
+++ b/arch/mips/include/asm/sn/fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/sn0_fru.h>
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips)
+ */
+#ifndef __ASM_SN_FRU_H
+#define __ASM_SN_FRU_H
+
+#define MAX_DIMMS			8	 /* max # of dimm banks */
+#define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+	confidence_t km_confidence; /* confidence level that the memory is bad
+				     * is this necessary ?
+				     */
+	confidence_t km_dimm[MAX_DIMMS];
+	                            /* confidence level that dimm[i] is bad
+				     *I think this is the right number
+				     */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+	confidence_t  	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t  	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t  	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t  	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+typedef struct kf_pci_bus_s {
+	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
+	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
+	                                /* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+#endif /* __ASM_SN_FRU_H */
diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h
new file mode 100644
index 0000000..9cb6ff7
--- /dev/null
+++ b/arch/mips/include/asm/sn/gda.h
@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/gda.h>.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ *
+ * gda.h -- Contains the data structure for the global data area,
+ * 	The GDA contains information communicated between the
+ *	PROM, SYMMON, and the kernel.
+ */
+#ifndef _ASM_SN_GDA_H
+#define _ASM_SN_GDA_H
+
+#include <asm/sn/addrs.h>
+
+#define GDA_MAGIC	0x58464552
+
+/*
+ * GDA Version History
+ *
+ * Version #	| Change
+ * -------------+-------------------------------------------------------
+ * 	1	| Initial SN0 version
+ * 	2	| Prom sets g_partid field to the partition number. 0 IS
+ *		| a valid partition #.
+ */
+
+#define GDA_VERSION	2	/* Current GDA version # */
+
+#define G_MAGICOFF	0
+#define G_VERSIONOFF	4
+#define G_PROMOPOFF	6
+#define G_MASTEROFF	8
+#define G_VDSOFF	12
+#define G_HKDNORMOFF	16
+#define G_HKDUTLBOFF	24
+#define G_HKDXUTLBOFF	32
+#define G_PARTIDOFF	40
+#define G_TABLEOFF	128
+
+#ifndef __ASSEMBLY__
+
+typedef struct gda {
+	u32	g_magic;	/* GDA magic number */
+	u16	g_version;	/* Version of this structure */
+	u16	g_masterid;	/* The NASID:CPUNUM of the master cpu */
+	u32	g_promop;	/* Passes requests from the kernel to prom */
+	u32	g_vds;		/* Store the virtual dipswitches here */
+	void	**g_hooked_norm;/* ptr to pda loc for norm hndlr */
+	void	**g_hooked_utlb;/* ptr to pda loc for utlb hndlr */
+	void	**g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */
+	int	g_partid;	/* partition id */
+	int	g_symmax;	/* Max symbols in name table. */
+	void	*g_dbstab;	/* Address of idbg symbol table */
+	char	*g_nametab;	/* Address of idbg name table */
+	void	*g_ktext_repmask;
+				/* Pointer to a mask of nodes with copies
+				 * of the kernel. */
+	char	g_padding[56];	/* pad out to 128 bytes */
+	nasid_t	g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
+						  * indexed by cnodeid.
+						  */
+} gda_t;
+
+#define GDA ((gda_t*) GDA_ADDR(get_nasid()))
+
+#endif /* !__ASSEMBLY__ */
+/*
+ * Define:	PART_GDA_VERSION
+ * Purpose:	Define the minimum version of the GDA required, lower
+ *		revisions assume GDA is NOT set up, and read partition
+ *		information from the board info.
+ */
+#define	PART_GDA_VERSION	2
+
+/*
+ * The following requests can be sent to the PROM during startup.
+ */
+
+#define PROMOP_MAGIC		0x0ead0000
+#define PROMOP_MAGIC_MASK	0x0fff0000
+
+#define PROMOP_BIST_SHIFT       11
+#define PROMOP_BIST_MASK        (0x3 << 11)
+
+#define PROMOP_REG		PI_ERR_STACK_ADDR_A
+
+#define PROMOP_INVALID		(PROMOP_MAGIC | 0x00)
+#define PROMOP_HALT             (PROMOP_MAGIC | 0x10)
+#define PROMOP_POWERDOWN        (PROMOP_MAGIC | 0x20)
+#define PROMOP_RESTART          (PROMOP_MAGIC | 0x30)
+#define PROMOP_REBOOT           (PROMOP_MAGIC | 0x40)
+#define PROMOP_IMODE            (PROMOP_MAGIC | 0x50)
+
+#define PROMOP_CMD_MASK		0x00f0
+#define PROMOP_OPTIONS_MASK	0xfff0
+
+#define PROMOP_SKIP_DIAGS	0x0100		/* don't bother running diags */
+#define PROMOP_SKIP_MEMINIT	0x0200		/* don't bother initing memory */
+#define PROMOP_SKIP_DEVINIT	0x0400		/* don't bother initing devices */
+#define PROMOP_BIST1		0x0800		/* keep track of which BIST ran */
+#define PROMOP_BIST2		0x1000		/* keep track of which BIST ran */
+
+#endif /* _ASM_SN_GDA_H */
diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h
new file mode 100644
index 0000000..1992d92
--- /dev/null
+++ b/arch/mips/include/asm/sn/hub.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SN_HUB_H
+#define __ASM_SN_HUB_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/sn/types.h>
+#include <asm/sn/io.h>
+#include <asm/sn/klkernvars.h>
+#include <asm/xtalk/xtalk.h>
+
+/* ip27-hubio.c */
+extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
+			  unsigned long xtalk_addr, size_t size);
+extern void hub_pio_init(cnodeid_t cnode);
+
+#endif /* __ASM_SN_HUB_H */
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
new file mode 100644
index 0000000..6718b64
--- /dev/null
+++ b/arch/mips/include/asm/sn/intr.h
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS		64
+
+#define INT_PEND0_BASELVL	0
+#define INT_PEND1_BASELVL	64
+
+#define	N_INTPENDJUNK_BITS	8
+#define	INTPENDJUNK_CLRBIT	0x80
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(level)				\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
+#define REMOTE_HUB_SEND_INTR(hub, level)			\
+	REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(level)	  			\
+do {								\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
+	LOCAL_HUB_L(PI_INT_PEND0);				\
+} while (0);
+
+#define REMOTE_HUB_CLR_INTR(hub, level)				\
+do {								\
+	nasid_t  __hub = (hub);					\
+								\
+	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
+	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
+} while (0);
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ *	L0 = SW1
+ *	L1 = SW2
+ *	L2 = INT_PEND0
+ *	L3 = INT_PEND1
+ *	L4 = RTC
+ *	L5 = Profiling Timer
+ *	L6 = Hub Errors
+ *	L7 = Count/Compare (T5 counters)
+ */
+
+
+/*
+ * INT_PEND0 hard-coded bits.
+ */
+
+/*
+ * INT_PEND0 bits determined by hardware:
+ */
+#define RESERVED_INTR		 0	/* What is this bit? */
+#define GFX_INTR_A		 1
+#define GFX_INTR_B		 2
+#define PG_MIG_INTR		 3
+#define UART_INTR		 4
+#define CC_PEND_A		 5
+#define CC_PEND_B		 6
+
+/*
+ * INT_PEND0 used by the kernel for itself ...
+ */
+#define CPU_RESCHED_A_IRQ	 7
+#define CPU_RESCHED_B_IRQ	 8
+#define CPU_CALL_A_IRQ		 9
+#define CPU_CALL_B_IRQ		10
+#define MSC_MESG_INTR		11
+#define BASE_PCI_IRQ		12
+
+/*
+ * INT_PEND0 again, bits determined by hardware / hardcoded:
+ */
+#define SDISK_INTR		63	/* SABLE name */
+#define IP_PEND0_6_63		63	/* What is this bit? */
+
+/*
+ * INT_PEND1 hard-coded bits:
+ */
+#define NI_BRDCAST_ERR_A	39
+#define NI_BRDCAST_ERR_B	40
+
+#define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_B	42
+
+#define	TLB_INTR_A		43	/* used for tlb flush random */
+#define	TLB_INTR_B		44
+
+#define IP27_INTR_0		45	/* Reserved for PROM use */
+#define IP27_INTR_1		46	/* do not use in Kernel */
+#define IP27_INTR_2		47
+#define IP27_INTR_3		48
+#define IP27_INTR_4		49
+#define IP27_INTR_5		50
+#define IP27_INTR_6		51
+#define IP27_INTR_7		52
+
+#define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
+					/* Bridge Errors */
+#define	DEBUG_INTR_A		54
+#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
+#define IO_ERROR_INTR		57	/* Setup by PROM */
+#define CLK_ERR_INTR		58
+#define COR_ERR_INTR_A		59
+#define COR_ERR_INTR_B		60
+#define MD_COR_ERR_INTR		61
+#define NI_ERROR_INTR		62
+#define MSC_PANIC_INTR		63
+
+#endif /* __ASM_SN_INTR_H */
diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h
new file mode 100644
index 0000000..24c6775
--- /dev/null
+++ b/arch/mips/include/asm/sn/io.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2003 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hubio.h>
+#endif
+
+
+#define IIO_ITTE_BASE		0x400160 /* base of translation table entries */
+#define IIO_ITTE(bigwin)	(IIO_ITTE_BASE + 8*(bigwin))
+
+#define IIO_ITTE_OFFSET_BITS	5	/* size of offset field */
+#define IIO_ITTE_OFFSET_MASK	((1<<IIO_ITTE_OFFSET_BITS)-1)
+#define IIO_ITTE_OFFSET_SHIFT	0
+
+#define IIO_ITTE_WIDGET_BITS	4	/* size of widget field */
+#define IIO_ITTE_WIDGET_MASK	((1<<IIO_ITTE_WIDGET_BITS)-1)
+#define IIO_ITTE_WIDGET_SHIFT	8
+
+#define IIO_ITTE_IOSP		1	/* I/O Space bit */
+#define IIO_ITTE_IOSP_MASK	1
+#define IIO_ITTE_IOSP_SHIFT	12
+#define HUB_PIO_MAP_TO_MEM	0
+#define HUB_PIO_MAP_TO_IO	1
+
+#define IIO_ITTE_INVALID_WIDGET	3	/* an invalid widget  */
+
+#define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \
+	REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \
+		(((((addr) >> BWIN_SIZE_BITS) & \
+		   IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \
+		(io_or_mem << IIO_ITTE_IOSP_SHIFT) | \
+		(((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT)))
+
+#define IIO_ITTE_DISABLE(nasid, bigwin) \
+	IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \
+		     (bigwin), IIO_ITTE_INVALID_WIDGET, 0)
+
+#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin))
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define	IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+			(_x) : \
+			(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+#endif /* _ASM_SN_IO_H */
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
new file mode 100644
index 0000000..0996777
--- /dev/null
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -0,0 +1,663 @@
+/*
+ * Copyright (C) 1999, 2000 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _IOC3_H
+#define _IOC3_H
+
+#include <linux/types.h>
+
+/* SUPERIO uart register map */
+typedef volatile struct ioc3_uartregs {
+	union {
+		volatile u8	rbr;	/* read only, DLAB == 0 */
+		volatile u8	thr;	/* write only, DLAB == 0 */
+		volatile u8	dll;	/* DLAB == 1 */
+	} u1;
+	union {
+		volatile u8	ier;	/* DLAB == 0 */
+		volatile u8	dlm;	/* DLAB == 1 */
+	} u2;
+	union {
+		volatile u8	iir;	/* read only */
+		volatile u8	fcr;	/* write only */
+	} u3;
+	volatile u8	    iu_lcr;
+	volatile u8	    iu_mcr;
+	volatile u8	    iu_lsr;
+	volatile u8	    iu_msr;
+	volatile u8	    iu_scr;
+} ioc3_uregs_t;
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+	volatile u8		fill[0x141];	/* starts at 0x141 */
+
+	volatile u8		uartc;
+	volatile u8		kbdcg;
+
+	volatile u8		fill0[0x150 - 0x142 - 1];
+
+	volatile u8		pp_data;
+	volatile u8		pp_dsr;
+	volatile u8		pp_dcr;
+
+	volatile u8		fill1[0x158 - 0x152 - 1];
+
+	volatile u8		pp_fifa;
+	volatile u8		pp_cfgb;
+	volatile u8		pp_ecr;
+
+	volatile u8		fill2[0x168 - 0x15a - 1];
+
+	volatile u8		rtcad;
+	volatile u8		rtcdat;
+
+	volatile u8		fill3[0x170 - 0x169 - 1];
+
+	struct ioc3_uartregs    uartb;	/* 0x20170  */
+	struct ioc3_uartregs    uarta;	/* 0x20178  */
+};
+
+/* Register layout of IOC3 in configuration space.  */
+struct ioc3 {
+	volatile u32	pad0[7];	/* 0x00000  */
+	volatile u32	sio_ir;		/* 0x0001c  */
+	volatile u32	sio_ies;	/* 0x00020  */
+	volatile u32	sio_iec;	/* 0x00024  */
+	volatile u32	sio_cr;		/* 0x00028  */
+	volatile u32	int_out;	/* 0x0002c  */
+	volatile u32	mcr;		/* 0x00030  */
+
+	/* General Purpose I/O registers  */
+	volatile u32	gpcr_s;		/* 0x00034  */
+	volatile u32	gpcr_c;		/* 0x00038  */
+	volatile u32	gpdr;		/* 0x0003c  */
+	volatile u32	gppr_0;		/* 0x00040  */
+	volatile u32	gppr_1;		/* 0x00044  */
+	volatile u32	gppr_2;		/* 0x00048  */
+	volatile u32	gppr_3;		/* 0x0004c  */
+	volatile u32	gppr_4;		/* 0x00050  */
+	volatile u32	gppr_5;		/* 0x00054  */
+	volatile u32	gppr_6;		/* 0x00058  */
+	volatile u32	gppr_7;		/* 0x0005c  */
+	volatile u32	gppr_8;		/* 0x00060  */
+	volatile u32	gppr_9;		/* 0x00064  */
+	volatile u32	gppr_10;	/* 0x00068  */
+	volatile u32	gppr_11;	/* 0x0006c  */
+	volatile u32	gppr_12;	/* 0x00070  */
+	volatile u32	gppr_13;	/* 0x00074  */
+	volatile u32	gppr_14;	/* 0x00078  */
+	volatile u32	gppr_15;	/* 0x0007c  */
+
+	/* Parallel Port Registers  */
+	volatile u32	ppbr_h_a;	/* 0x00080  */
+	volatile u32	ppbr_l_a;	/* 0x00084  */
+	volatile u32	ppcr_a;		/* 0x00088  */
+	volatile u32	ppcr;		/* 0x0008c  */
+	volatile u32	ppbr_h_b;	/* 0x00090  */
+	volatile u32	ppbr_l_b;	/* 0x00094  */
+	volatile u32	ppcr_b;		/* 0x00098  */
+
+	/* Keyboard and Mouse Registers  */
+	volatile u32	km_csr;		/* 0x0009c  */
+	volatile u32	k_rd;		/* 0x000a0  */
+	volatile u32	m_rd;		/* 0x000a4  */
+	volatile u32	k_wd;		/* 0x000a8  */
+	volatile u32	m_wd;		/* 0x000ac  */
+
+	/* Serial Port Registers  */
+	volatile u32	sbbr_h;		/* 0x000b0  */
+	volatile u32	sbbr_l;		/* 0x000b4  */
+	volatile u32	sscr_a;		/* 0x000b8  */
+	volatile u32	stpir_a;	/* 0x000bc  */
+	volatile u32	stcir_a;	/* 0x000c0  */
+	volatile u32	srpir_a;	/* 0x000c4  */
+	volatile u32	srcir_a;	/* 0x000c8  */
+	volatile u32	srtr_a;		/* 0x000cc  */
+	volatile u32	shadow_a;	/* 0x000d0  */
+	volatile u32	sscr_b;		/* 0x000d4  */
+	volatile u32	stpir_b;	/* 0x000d8  */
+	volatile u32	stcir_b;	/* 0x000dc  */
+	volatile u32	srpir_b;	/* 0x000e0  */
+	volatile u32	srcir_b;	/* 0x000e4  */
+	volatile u32	srtr_b;		/* 0x000e8  */
+	volatile u32	shadow_b;	/* 0x000ec  */
+
+	/* Ethernet Registers  */
+	volatile u32	emcr;		/* 0x000f0  */
+	volatile u32	eisr;		/* 0x000f4  */
+	volatile u32	eier;		/* 0x000f8  */
+	volatile u32	ercsr;		/* 0x000fc  */
+	volatile u32	erbr_h;		/* 0x00100  */
+	volatile u32	erbr_l;		/* 0x00104  */
+	volatile u32	erbar;		/* 0x00108  */
+	volatile u32	ercir;		/* 0x0010c  */
+	volatile u32	erpir;		/* 0x00110  */
+	volatile u32	ertr;		/* 0x00114  */
+	volatile u32	etcsr;		/* 0x00118  */
+	volatile u32	ersr;		/* 0x0011c  */
+	volatile u32	etcdc;		/* 0x00120  */
+	volatile u32	ebir;		/* 0x00124  */
+	volatile u32	etbr_h;		/* 0x00128  */
+	volatile u32	etbr_l;		/* 0x0012c  */
+	volatile u32	etcir;		/* 0x00130  */
+	volatile u32	etpir;		/* 0x00134  */
+	volatile u32	emar_h;		/* 0x00138  */
+	volatile u32	emar_l;		/* 0x0013c  */
+	volatile u32	ehar_h;		/* 0x00140  */
+	volatile u32	ehar_l;		/* 0x00144  */
+	volatile u32	micr;		/* 0x00148  */
+	volatile u32	midr_r;		/* 0x0014c  */
+	volatile u32	midr_w;		/* 0x00150  */
+	volatile u32	pad1[(0x20000 - 0x00154) / 4];
+
+	/* SuperIO Registers  XXX */
+	struct ioc3_sioregs	sregs;	/* 0x20000 */
+	volatile u32	pad2[(0x40000 - 0x20180) / 4];
+
+	/* SSRAM Diagnostic Access */
+	volatile u32	ssram[(0x80000 - 0x40000) / 4];
+
+	/* Bytebus device offsets
+	   0x80000 -   Access to the generic devices selected with   DEV0
+	   0x9FFFF     bytebus DEV_SEL_0
+	   0xA0000 -   Access to the generic devices selected with   DEV1
+	   0xBFFFF     bytebus DEV_SEL_1
+	   0xC0000 -   Access to the generic devices selected with   DEV2
+	   0xDFFFF     bytebus DEV_SEL_2
+	   0xE0000 -   Access to the generic devices selected with   DEV3
+	   0xFFFFF     bytebus DEV_SEL_3  */
+};
+
+/*
+ * Ethernet RX Buffer
+ */
+struct ioc3_erxbuf {
+	u32	w0;			/* first word (valid,bcnt,cksum) */
+	u32	err;			/* second word various errors */
+	/* next comes n bytes of padding */
+	/* then the received ethernet frame itself */
+};
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+/*
+ * Ethernet TX Descriptor
+ */
+#define ETXD_DATALEN    104
+struct ioc3_etxd {
+	u32	cmd;				/* command field */
+	u32	bufcnt;				/* buffer counts field */
+	u64	p1;				/* buffer pointer 1 */
+	u64	p2;				/* buffer pointer 2 */
+	u8	data[ETXD_DATALEN];		/* opt. tx data */
+};
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0	0x80000L
+#define IOC3_BYTEBUS_DEV1	0xa0000L
+#define IOC3_BYTEBUS_DEV2	0xc0000L
+#define IOC3_BYTEBUS_DEV3	0xe0000L
+
+/* ------------------------------------------------------------------------- */
+
+/* Superio Registers (PIO Access) */
+#define IOC3_SIO_BASE		0x20000
+#define IOC3_SIO_UARTC		(IOC3_SIO_BASE+0x141)	/* UART Config */
+#define IOC3_SIO_KBDCG		(IOC3_SIO_BASE+0x142)	/* KBD Config */
+#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)		/* Parallel Port */
+#define IOC3_SIO_RTC_BASE	(IOC3_SIO_BASE+0x168)	/* Real Time Clock */
+#define IOC3_SIO_UB_BASE	(IOC3_SIO_BASE+UARTB_BASE)	/* UART B */
+#define IOC3_SIO_UA_BASE	(IOC3_SIO_BASE+UARTA_BASE)	/* UART A */
+
+/* SSRAM Diagnostic Access */
+#define IOC3_SSRAM	IOC3_RAM_OFF	/* base of SSRAM diagnostic access */
+#define IOC3_SSRAM_LEN	0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_DM	0x0000ffff	/* data mask */
+#define IOC3_SSRAM_PM	0x00010000	/* parity mask */
+
+/* bitmasks for PCI_SCR */
+#define PCI_SCR_PAR_RESP_EN	0x00000040	/* enb PCI parity checking */
+#define PCI_SCR_SERR_EN		0x00000100	/* enable the SERR# driver */
+#define PCI_SCR_DROP_MODE_EN	0x00008000	/* drop pios on parity err */
+#define PCI_SCR_RX_SERR		(0x1 << 16)
+#define PCI_SCR_DROP_MODE	(0x1 << 17)
+#define PCI_SCR_SIG_PAR_ERR	(0x1 << 24)
+#define PCI_SCR_SIG_TAR_ABRT	(0x1 << 27)
+#define PCI_SCR_RX_TAR_ABRT	(0x1 << 28)
+#define PCI_SCR_SIG_MST_ABRT	(0x1 << 29)
+#define PCI_SCR_SIG_SERR	(0x1 << 30)
+#define PCI_SCR_PAR_ERR		(0x1 << 31)
+
+/* bitmasks for IOC3_KM_CSR */
+#define KM_CSR_K_WRT_PEND 0x00000001	/* kbd port xmitting or resetting */
+#define KM_CSR_M_WRT_PEND 0x00000002	/* mouse port xmitting or resetting */
+#define KM_CSR_K_LCB	  0x00000004	/* Line Cntrl Bit for last KBD write */
+#define KM_CSR_M_LCB	  0x00000008	/* same for mouse */
+#define KM_CSR_K_DATA	  0x00000010	/* state of kbd data line */
+#define KM_CSR_K_CLK	  0x00000020	/* state of kbd clock line */
+#define KM_CSR_K_PULL_DATA 0x00000040	/* pull kbd data line low */
+#define KM_CSR_K_PULL_CLK 0x00000080	/* pull kbd clock line low */
+#define KM_CSR_M_DATA	  0x00000100	/* state of ms data line */
+#define KM_CSR_M_CLK	  0x00000200	/* state of ms clock line */
+#define KM_CSR_M_PULL_DATA 0x00000400	/* pull ms data line low */
+#define KM_CSR_M_PULL_CLK 0x00000800	/* pull ms clock line low */
+#define KM_CSR_EMM_MODE	  0x00001000	/* emulation mode */
+#define KM_CSR_SIM_MODE	  0x00002000	/* clock X8 */
+#define KM_CSR_K_SM_IDLE  0x00004000	/* Keyboard is idle */
+#define KM_CSR_M_SM_IDLE  0x00008000	/* Mouse is idle */
+#define KM_CSR_K_TO	  0x00010000	/* Keyboard trying to send/receive */
+#define KM_CSR_M_TO	  0x00020000	/* Mouse trying to send/receive */
+#define KM_CSR_K_TO_EN	  0x00040000	/* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_M_TO_EN	  0x00080000	/* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
+					   SIO_IR to assert */
+#define KM_CSR_K_CLAMP_ONE	0x00100000	/* Pull K_CLK low after rec. one char */
+#define KM_CSR_M_CLAMP_ONE	0x00200000	/* Pull M_CLK low after rec. one char */
+#define KM_CSR_K_CLAMP_THREE	0x00400000	/* Pull K_CLK low after rec. three chars */
+#define KM_CSR_M_CLAMP_THREE	0x00800000	/* Pull M_CLK low after rec. three char */
+
+/* bitmasks for IOC3_K_RD and IOC3_M_RD */
+#define KM_RD_DATA_2	0x000000ff	/* 3rd char recvd since last read */
+#define KM_RD_DATA_2_SHIFT 0
+#define KM_RD_DATA_1	0x0000ff00	/* 2nd char recvd since last read */
+#define KM_RD_DATA_1_SHIFT 8
+#define KM_RD_DATA_0	0x00ff0000	/* 1st char recvd since last read */
+#define KM_RD_DATA_0_SHIFT 16
+#define KM_RD_FRAME_ERR_2 0x01000000	/*  framing or parity error in byte 2 */
+#define KM_RD_FRAME_ERR_1 0x02000000	/* same for byte 1 */
+#define KM_RD_FRAME_ERR_0 0x04000000	/* same for byte 0 */
+
+#define KM_RD_KBD_MSE	0x08000000	/* 0 if from kbd, 1 if from mouse */
+#define KM_RD_OFLO	0x10000000	/* 4th char recvd before this read */
+#define KM_RD_VALID_2	0x20000000	/* DATA_2 valid */
+#define KM_RD_VALID_1	0x40000000	/* DATA_1 valid */
+#define KM_RD_VALID_0	0x80000000	/* DATA_0 valid */
+#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2)
+
+/* bitmasks for IOC3_K_WD & IOC3_M_WD */
+#define KM_WD_WRT_DATA	0x000000ff	/* write to keyboard/mouse port */
+#define KM_WD_WRT_DATA_SHIFT 0
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN	0x01	/* char(s) lost */
+#define RXSB_PAR_ERR	0x02	/* parity error */
+#define RXSB_FRAME_ERR	0x04	/* framing error */
+#define RXSB_BREAK	0x08	/* break character */
+#define RXSB_CTS	0x10	/* state of CTS */
+#define RXSB_DCD	0x20	/* state of DCD */
+#define RXSB_MODEM_VALID 0x40	/* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID 0x80	/* data byte, FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
+#define TXCB_INVALID	0x00	/* byte is invalid */
+#define TXCB_VALID	0x40	/* byte is valid */
+#define TXCB_MCR	0x80	/* data<7:0> to modem control register */
+#define TXCB_DELAY	0xc0	/* delay data<7:0> mSec */
+
+/* bitmasks for IOC3_SBBR_L */
+#define SBBR_L_SIZE	0x00000001	/* 0 == 1KB rings, 1 == 4KB rings */
+#define SBBR_L_BASE	0xfffff000	/* lower serial ring base addr */
+
+/* bitmasks for IOC3_SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD 0x000001ff	/* hiwater mark */
+#define SSCR_TX_TIMER_BUSY 0x00010000	/* TX timer in progress */
+#define SSCR_HFC_EN	0x00020000	/* hardware flow control enabled */
+#define SSCR_RX_RING_DCD 0x00040000	/* post RX record on delta-DCD */
+#define SSCR_RX_RING_CTS 0x00080000	/* post RX record on delta-CTS */
+#define SSCR_HIGH_SPD	0x00100000	/* 4X speed */
+#define SSCR_DIAG	0x00200000	/* bypass clock divider for sim */
+#define SSCR_RX_DRAIN	0x08000000	/* drain RX buffer to memory */
+#define SSCR_DMA_EN	0x10000000	/* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE	0x20000000	/* pause DMA */
+#define SSCR_PAUSE_STATE 0x40000000	/* sets when PAUSE takes effect */
+#define SSCR_RESET	0x80000000	/* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K 0x00000ff8	/* for 4K buffers */
+#define PROD_CONS_PTR_1K 0x000003f8	/* for 1K buffers */
+#define PROD_CONS_PTR_OFF 3
+
+/* bitmasks for IOC3_SRCIR_<A:B> */
+#define SRCIR_ARM	0x80000000	/* arm RX timer */
+
+/* bitmasks for IOC3_SRPIR_<A:B> */
+#define SRPIR_BYTE_CNT	0x07000000	/* bytes in packer */
+#define SRPIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_STCIR_<A:B> */
+#define STCIR_BYTE_CNT	0x0f000000	/* bytes in unpacker */
+#define STCIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_SHADOW_<A:B> */
+#define SHADOW_DR	0x00000001	/* data ready */
+#define SHADOW_OE	0x00000002	/* overrun error */
+#define SHADOW_PE	0x00000004	/* parity error */
+#define SHADOW_FE	0x00000008	/* framing error */
+#define SHADOW_BI	0x00000010	/* break interrupt */
+#define SHADOW_THRE	0x00000020	/* transmit holding register empty */
+#define SHADOW_TEMT	0x00000040	/* transmit shift register empty */
+#define SHADOW_RFCE	0x00000080	/* char in RX fifo has an error */
+#define SHADOW_DCTS	0x00010000	/* delta clear to send */
+#define SHADOW_DDCD	0x00080000	/* delta data carrier detect */
+#define SHADOW_CTS	0x00100000	/* clear to send */
+#define SHADOW_DCD	0x00800000	/* data carrier detect */
+#define SHADOW_DTR	0x01000000	/* data terminal ready */
+#define SHADOW_RTS	0x02000000	/* request to send */
+#define SHADOW_OUT1	0x04000000	/* 16550 OUT1 bit */
+#define SHADOW_OUT2	0x08000000	/* 16550 OUT2 bit */
+#define SHADOW_LOOP	0x10000000	/* loopback enabled */
+
+/* bitmasks for IOC3_SRTR_<A:B> */
+#define SRTR_CNT	0x00000fff	/* reload value for RX timer */
+#define SRTR_CNT_VAL	0x0fff0000	/* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT 16
+#define SRTR_HZ		16000	/* SRTR clock frequency */
+
+/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES  */
+#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
+#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
+#define SIO_IR_SB_TX_MT		0x00000200	/* */
+#define SIO_IR_SB_RX_FULL	0x00000400	/* */
+#define SIO_IR_SB_RX_HIGH	0x00000800	/* */
+#define SIO_IR_SB_RX_TIMER	0x00001000	/* */
+#define SIO_IR_SB_DELTA_DCD	0x00002000	/* */
+#define SIO_IR_SB_DELTA_CTS	0x00004000	/* */
+#define SIO_IR_SB_INT		0x00008000	/* */
+#define SIO_IR_SB_TX_EXPLICIT	0x00010000	/* */
+#define SIO_IR_SB_MEMERR	0x00020000	/* */
+#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
+#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
+#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
+#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
+#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
+#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
+#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT	28
+
+/* per device interrupt masks */
+#define SIO_IR_SA		(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \
+				 SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \
+				 SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \
+				 SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \
+				 SIO_IR_SA_MEMERR)
+#define SIO_IR_SB		(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \
+				 SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \
+				 SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \
+				 SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \
+				 SIO_IR_SB_MEMERR)
+#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* macro to load pending interrupts */
+#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
+				 PCI_INW(&((mem)->sio_ies_ro)))
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_SIO_RESET	0x00000001	/* reset the SIO */
+#define SIO_CR_SER_A_BASE	0x000000fe	/* DMA poll addr port A */
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE	0x00007f00	/* DMA poll addr port B */
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_SR_CMD_PULSE	0x00078000	/* byte bus strobe length */
+#define SIO_CR_CMD_PULSE_SHIFT	15
+#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA	0x00000000
+#define SIO_CR_ARB_DIAG_RXA	0x00080000
+#define SIO_CR_ARB_DIAG_TXB	0x00100000
+#define SIO_CR_ARB_DIAG_RXB	0x00180000
+#define SIO_CR_ARB_DIAG_PP	0x00200000
+#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
+
+/* bitmasks for INT_OUT */
+#define INT_OUT_COUNT	0x0000ffff	/* pulse interval timer */
+#define INT_OUT_MODE	0x00070000	/* mode mask */
+#define INT_OUT_MODE_0	0x00000000	/* set output to 0 */
+#define INT_OUT_MODE_1	0x00040000	/* set output to 1 */
+#define INT_OUT_MODE_1PULSE 0x00050000	/* send 1 pulse */
+#define INT_OUT_MODE_PULSES 0x00060000	/* send 1 pulse every interval */
+#define INT_OUT_MODE_SQW 0x00070000	/* toggle output every interval */
+#define INT_OUT_DIAG	0x40000000	/* diag mode */
+#define INT_OUT_INT_OUT 0x80000000	/* current state of INT_OUT */
+
+/* time constants for INT_OUT */
+#define INT_OUT_NS_PER_TICK (30 * 260)	/* 30 ns PCI clock, divisor=260 */
+#define INT_OUT_TICKS_PER_PULSE 3	/* outgoing pulse lasts 3 ticks */
+#define INT_OUT_US_TO_COUNT(x)		/* convert uS to a count value */ \
+	(((x) * 10 + INT_OUT_NS_PER_TICK / 200) *	\
+	 100 / INT_OUT_NS_PER_TICK - 1)
+#define INT_OUT_COUNT_TO_US(x)		/* convert count value to uS */ \
+	(((x) + 1) * INT_OUT_NS_PER_TICK / 1000)
+#define INT_OUT_MIN_TICKS 3	/* min period is width of pulse in "ticks" */
+#define INT_OUT_MAX_TICKS INT_OUT_COUNT		/* largest possible count */
+
+/* bitmasks for GPCR */
+#define GPCR_DIR	0x000000ff	/* tristate pin input or output */
+#define GPCR_DIR_PIN(x) (1<<(x))	/* access one of the DIR bits */
+#define GPCR_EDGE	0x000f0000	/* extint edge or level sensitive */
+#define GPCR_EDGE_PIN(x) (1<<((x)+15))	/* access one of the EDGE bits */
+
+/* values for GPCR */
+#define GPCR_INT_OUT_EN 0x00100000	/* enable INT_OUT to pin 0 */
+#define GPCR_MLAN_EN	0x00200000	/* enable MCR to pin 8 */
+#define GPCR_DIR_SERA_XCVR 0x00000080	/* Port A Transceiver select enable */
+#define GPCR_DIR_SERB_XCVR 0x00000040	/* Port B Transceiver select enable */
+#define GPCR_DIR_PHY_RST   0x00000020	/* ethernet PHY reset enable */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin controlling uart b mode select */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin controlling uart a mode select */
+
+#define EMCR_DUPLEX		0x00000001
+#define EMCR_PROMISC		0x00000002
+#define EMCR_PADEN		0x00000004
+#define EMCR_RXOFF_MASK		0x000001f8
+#define EMCR_RXOFF_SHIFT	3
+#define EMCR_RAMPAR		0x00000200
+#define EMCR_BADPAR		0x00000800
+#define EMCR_BUFSIZ		0x00001000
+#define EMCR_TXDMAEN		0x00002000
+#define EMCR_TXEN		0x00004000
+#define EMCR_RXDMAEN		0x00008000
+#define EMCR_RXEN		0x00010000
+#define EMCR_LOOPBACK		0x00020000
+#define EMCR_ARB_DIAG		0x001c0000
+#define EMCR_ARB_DIAG_IDLE	0x00200000
+#define EMCR_RST		0x80000000
+
+#define EISR_RXTIMERINT		0x00000001
+#define EISR_RXTHRESHINT	0x00000002
+#define EISR_RXOFLO		0x00000004
+#define EISR_RXBUFOFLO		0x00000008
+#define EISR_RXMEMERR		0x00000010
+#define EISR_RXPARERR		0x00000020
+#define EISR_TXEMPTY		0x00010000
+#define EISR_TXRTRY		0x00020000
+#define EISR_TXEXDEF		0x00040000
+#define EISR_TXLCOL		0x00080000
+#define EISR_TXGIANT		0x00100000
+#define EISR_TXBUFUFLO		0x00200000
+#define EISR_TXEXPLICIT		0x00400000
+#define EISR_TXCOLLWRAP		0x00800000
+#define EISR_TXDEFERWRAP	0x01000000
+#define EISR_TXMEMERR		0x02000000
+#define EISR_TXPARERR		0x04000000
+
+#define ERCSR_THRESH_MASK	0x000001ff	/* enet RX threshold */
+#define ERCSR_RX_TMR		0x40000000	/* simulation only */
+#define ERCSR_DIAG_OFLO		0x80000000	/* simulation only */
+
+#define ERBR_ALIGNMENT		4096
+#define ERBR_L_RXRINGBASE_MASK	0xfffff000
+
+#define ERBAR_BARRIER_BIT	0x0100
+#define ERBAR_RXBARR_MASK	0xffff0000
+#define ERBAR_RXBARR_SHIFT	16
+
+#define ERCIR_RXCONSUME_MASK	0x00000fff
+
+#define ERPIR_RXPRODUCE_MASK	0x00000fff
+#define ERPIR_ARM		0x80000000
+
+#define ERTR_CNT_MASK		0x000007ff
+
+#define ETCSR_IPGT_MASK		0x0000007f
+#define ETCSR_IPGR1_MASK	0x00007f00
+#define ETCSR_IPGR1_SHIFT	8
+#define ETCSR_IPGR2_MASK	0x007f0000
+#define ETCSR_IPGR2_SHIFT	16
+#define ETCSR_NOTXCLK		0x80000000
+
+#define ETCDC_COLLCNT_MASK	0x0000ffff
+#define ETCDC_DEFERCNT_MASK	0xffff0000
+#define ETCDC_DEFERCNT_SHIFT	16
+
+#define ETBR_ALIGNMENT		(64*1024)
+#define ETBR_L_RINGSZ_MASK	0x00000001
+#define ETBR_L_RINGSZ128	0
+#define ETBR_L_RINGSZ512	1
+#define ETBR_L_TXRINGBASE_MASK	0xffffc000
+
+#define ETCIR_TXCONSUME_MASK	0x0000ffff
+#define ETCIR_IDLE		0x80000000
+
+#define ETPIR_TXPRODUCE_MASK	0x0000ffff
+
+#define EBIR_TXBUFPROD_MASK	0x0000001f
+#define EBIR_TXBUFCONS_MASK	0x00001f00
+#define EBIR_TXBUFCONS_SHIFT	8
+#define EBIR_RXBUFPROD_MASK	0x007fc000
+#define EBIR_RXBUFPROD_SHIFT	14
+#define EBIR_RXBUFCONS_MASK	0xff800000
+#define EBIR_RXBUFCONS_SHIFT	23
+
+#define MICR_REGADDR_MASK	0x0000001f
+#define MICR_PHYADDR_MASK	0x000003e0
+#define MICR_PHYADDR_SHIFT	5
+#define MICR_READTRIG		0x00000400
+#define MICR_BUSY		0x00000800
+
+#define MIDR_DATA_MASK		0x0000ffff
+
+#define ERXBUF_IPCKSUM_MASK	0x0000ffff
+#define ERXBUF_BYTECNT_MASK	0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT	16
+#define ERXBUF_V		0x80000000
+
+#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
+#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
+#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
+#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
+#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
+#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
+#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
+#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
+#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
+#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
+#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
+#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
+
+#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
+#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
+#define ETXD_D0V		0x00010000	/* data 0 valid */
+#define ETXD_B1V		0x00020000	/* buf 1 valid */
+#define ETXD_B2V		0x00040000	/* buf 2 valid */
+#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
+#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT	20
+
+#define ETXD_D0CNT_MASK		0x0000007f
+#define ETXD_B1CNT_MASK		0x0007ff00
+#define ETXD_B1CNT_SHIFT	8
+#define ETXD_B2CNT_MASK		0x7ff00000
+#define ETXD_B2CNT_SHIFT	20
+
+typedef enum ioc3_subdevs_e {
+    ioc3_subdev_ether,
+    ioc3_subdev_generic,
+    ioc3_subdev_nic,
+    ioc3_subdev_kbms,
+    ioc3_subdev_ttya,
+    ioc3_subdev_ttyb,
+    ioc3_subdev_ecpp,
+    ioc3_subdev_rt,
+    ioc3_nsubdevs
+} ioc3_subdev_t;
+
+/* subdevice disable bits,
+ * from the standard INFO_LBL_SUBDEVS
+ */
+#define IOC3_SDB_ETHER		(1<<ioc3_subdev_ether)
+#define IOC3_SDB_GENERIC	(1<<ioc3_subdev_generic)
+#define IOC3_SDB_NIC		(1<<ioc3_subdev_nic)
+#define IOC3_SDB_KBMS		(1<<ioc3_subdev_kbms)
+#define IOC3_SDB_TTYA		(1<<ioc3_subdev_ttya)
+#define IOC3_SDB_TTYB		(1<<ioc3_subdev_ttyb)
+#define IOC3_SDB_ECPP		(1<<ioc3_subdev_ecpp)
+#define IOC3_SDB_RT		(1<<ioc3_subdev_rt)
+
+#define IOC3_ALL_SUBDEVS	((1<<ioc3_nsubdevs)-1)
+
+#define IOC3_SDB_SERIAL		(IOC3_SDB_TTYA|IOC3_SDB_TTYB)
+
+#define IOC3_STD_SUBDEVS	IOC3_ALL_SUBDEVS
+
+#define IOC3_INTA_SUBDEVS	IOC3_SDB_ETHER
+#define IOC3_INTB_SUBDEVS	(IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
+
+#endif /* _IOC3_H */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
new file mode 100644
index 0000000..09e590d
--- /dev/null
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -0,0 +1,898 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_KLCONFIG_H
+#define	_ASM_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+/*
+ * WARNING:
+ *	Certain assembly language routines (notably xxxxx.s) in the IP27PROM
+ *	will depend on the format of the data structures in this file.  In
+ *      most cases, rearranging the fields can seriously break things.
+ *      Adding fields in the beginning or middle can also break things.
+ *      Add fields if necessary, to the end of a struct in such a way
+ *      that offsets of existing fields do not change.
+ */
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+
+#if defined(CONFIG_SGI_IP27)
+
+#include <asm/sn/sn0/addrs.h>
+//#include <sys/SN/router.h>
+// XXX Stolen from <sys/SN/router.h>:
+#define MAX_ROUTER_PORTS (6)    /* Max. number of ports on a router */
+#include <asm/sn/fru.h>
+//#include <sys/graph.h>
+//#include <sys/xtalk/xbow.h>
+
+#elif defined(CONFIG_SGI_IP35)
+
+#include <asm/sn/sn1/addrs.h>
+#include <sys/sn/router.h>
+#include <sys/graph.h>
+#include <asm/xtalk/xbow.h>
+
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
+#include <asm/sn/agent.h>
+#include <asm/fw/arc/types.h>
+#include <asm/fw/arc/hinv.h>
+#if defined(CONFIG_SGI_IP35)
+// The hack file has to be before vector and after sn0_fru....
+#include <asm/hack.h>
+#include <asm/sn/vector.h>
+#include <asm/xtalk/xtalk.h>
+#endif /* CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+
+typedef u64  nic_t;
+
+#define KLCFGINFO_MAGIC	0xbeedbabe
+
+typedef s32 klconf_off_t;
+
+/*
+ * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
+ */
+#define	MAX_MODULE_ID		255
+#define SIZE_PAD		4096 /* 4k padding for structures */
+/*
+ * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
+ * 2 Midplanes assuming no pci card cages
+ */
+#define MAX_SLOTS_PER_NODE	(1 + 2 + 6 + 2)
+
+/* XXX if each node is guranteed to have some memory */
+
+#define MAX_PCI_DEVS		8
+
+/* lboard_t->brd_flags fields */
+/* All bits in this field are currently used. Try the pad fields if
+   you need more flag bits */
+
+#define ENABLE_BOARD 		0x01
+#define FAILED_BOARD  		0x02
+#define DUPLICATE_BOARD 	0x04    /* Boards like midplanes/routers which
+					   are discovered twice. Use one of them */
+#define VISITED_BOARD		0x08	/* Used for compact hub numbering. */
+#define LOCAL_MASTER_IO6	0x10 	/* master io6 for that node */
+#define GLOBAL_MASTER_IO6	0x20
+#define THIRD_NIC_PRESENT 	0x40  	/* for future use */
+#define SECOND_NIC_PRESENT 	0x80 	/* addons like MIO are present */
+
+/* klinfo->flags fields */
+
+#define KLINFO_ENABLE 		0x01    /* This component is enabled */
+#define KLINFO_FAILED   	0x02 	/* This component failed */
+#define KLINFO_DEVICE   	0x04 	/* This component is a device */
+#define KLINFO_VISITED  	0x08 	/* This component has been visited */
+#define KLINFO_CONTROLLER   	0x10 	/* This component is a device controller */
+#define KLINFO_INSTALL   	0x20  	/* Install a driver */
+#define	KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
+#define IS_CONSOLE_IOC3(i)	((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
+
+#define GB2		0x80000000
+
+#define MAX_RSV_PTRS	32
+
+/* Structures to manage various data storage areas */
+/* The numbers must be contiguous since the array index i
+   is used in the code to allocate various areas.
+*/
+
+#define BOARD_STRUCT 		0
+#define COMPONENT_STRUCT 	1
+#define ERRINFO_STRUCT 		2
+#define KLMALLOC_TYPE_MAX 	(ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT 		3
+
+
+typedef struct console_s {
+	unsigned long 	uart_base;
+	unsigned long 	config_base;
+	unsigned long 	memory_base;
+	short		baud;
+	short		flag;
+	int		type;
+	nasid_t		nasid;
+	char		wid;
+	char 		npci;
+	nic_t		baseio_nic;
+} console_t;
+
+typedef struct klc_malloc_hdr {
+        klconf_off_t km_base;
+        klconf_off_t km_limit;
+        klconf_off_t km_current;
+} klc_malloc_hdr_t;
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	u64		ch_magic;	/* set this to KLCFGINFO_MAGIC */
+	u32		ch_version;    /* structure version number */
+	klconf_off_t	ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
+	klconf_off_t	ch_cons_off;       /* offset of ch_cons */
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	console_t	ch_cons_info;	/* address info of the console */
+	klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
+	confidence_t	ch_sw_belief;	/* confidence that software is bad*/
+	confidence_t	ch_sn0net_belief; /* confidence that sn0net is bad */
+} kl_config_hdr_t;
+
+
+#define KL_CONFIG_HDR(_nasid) 	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#define KL_CONFIG_INFO_OFFSET(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info)
+#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
+        (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+
+#define KL_CONFIG_INFO(_nasid) 						\
+        (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
+	 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
+	 0)
+#define KL_CONFIG_MAGIC(_nasid)		(KL_CONFIG_HDR(_nasid)->ch_magic)
+
+#define KL_CONFIG_CHECK_MAGIC(_nasid)					\
+        (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+
+#define KL_CONFIG_HDR_INIT_MAGIC(_nasid)	\
+                  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+
+/* --- New Macros for the changed kl_config_hdr_t structure --- */
+
+#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
+			((unsigned long)_k + (_k->ch_malloc_hdr_off)))
+
+#define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
+
+#define PTR_CH_CONS_INFO(_k)	((console_t *)\
+			((unsigned long)_k + (_k->ch_cons_off)))
+
+#define KL_CONFIG_CH_CONS_INFO(_n)   PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
+
+/* ------------------------------------------------------------- */
+
+#define KL_CONFIG_INFO_START(_nasid)	\
+        (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+
+#define KL_CONFIG_BOARD_NASID(_brd)	((_brd)->brd_nasid)
+#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off)	((_brd)->brd_next = (_off))
+
+#define KL_CONFIG_DUPLICATE_BOARD(_brd)	((_brd)->brd_flags & DUPLICATE_BOARD)
+
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link) 	\
+               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+
+#define XBOW_PORT_IO     0x1
+#define XBOW_PORT_HUB    0x2
+#define XBOW_PORT_ENABLE 0x4
+
+#define	SN0_PORT_FENCE_SHFT	0
+#define	SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+/*
+ * Values for CPU types
+ */
+#define KL_CPU_R4000		0x1	/* Standard R4000 */
+#define KL_CPU_TFP		0x2	/* TFP processor */
+#define	KL_CPU_R10000		0x3	/* R10000 (T5) */
+#define KL_CPU_NONE		(-1)	/* no cpu present in slot */
+
+/*
+ * IP27 BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_GFX	0x50		/* graphics boards */
+
+#define KLCLASS_PSEUDO_GFX	0x60	/* HDTV type cards that use a gfx
+					 * hw ifc to xtalk and are not gfx
+					 * class for sw purposes */
+
+#define KLCLASS_MAX	7		/* Bump this if a new CLASS is added */
+#define KLTYPE_MAX	10		/* Bump this if a new CLASS is added */
+
+#define KLCLASS_UNKNOWN	0xf0
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+/*
+ * IP27 board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE_NONE	0x00
+#define KLTYPE_EMPTY	0x00
+
+#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
+#define KLTYPE_IP27	(KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
+
+#define KLTYPE_WEIRDIO	(KLCLASS_IO  | 0x0)
+#define KLTYPE_BASEIO	(KLCLASS_IO  | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
+#define KLTYPE_IO6	KLTYPE_BASEIO       /* Additional name */
+#define KLTYPE_4CHSCSI	(KLCLASS_IO  | 0x2)
+#define KLTYPE_MSCSI	KLTYPE_4CHSCSI      /* Additional name */
+#define KLTYPE_ETHERNET	(KLCLASS_IO  | 0x3)
+#define KLTYPE_MENET	KLTYPE_ETHERNET     /* Additional name */
+#define KLTYPE_FDDI  	(KLCLASS_IO  | 0x4)
+#define KLTYPE_UNUSED	(KLCLASS_IO  | 0x5) /* XXX UNUSED */
+#define KLTYPE_HAROLD   (KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_PCI	KLTYPE_HAROLD
+#define KLTYPE_VME      (KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO   	(KLCLASS_IO  | 0x8)
+#define KLTYPE_FC    	(KLCLASS_IO  | 0x9)
+#define KLTYPE_LINC    	(KLCLASS_IO  | 0xA)
+#define KLTYPE_TPU    	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A   	(KLCLASS_IO  | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B   	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
+
+#define KLTYPE_GFX	(KLCLASS_GFX | 0x0) /* unknown graphics type */
+#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
+#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
+
+#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2    KLTYPE_ROUTER		/* Obsolete! */
+#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+
+#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
+#define KLTYPE_MIDPLANE8  (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
+#define KLTYPE_MIDPLANE    KLTYPE_MIDPLANE8
+#define KLTYPE_PBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_IBRICK		(KLCLASS_IOBRICK | 0x1)
+#define KLTYPE_PBRICK		(KLCLASS_IOBRICK | 0x2)
+#define KLTYPE_XBRICK		(KLCLASS_IOBRICK | 0x3)
+
+#define KLTYPE_PBRICK_BRIDGE	KLTYPE_PBRICK
+
+/* The value of type should be more than 8 so that hinv prints
+ * out the board name from the NIC string. For values less than
+ * 8 the name of the board needs to be hard coded in a few places.
+ * When bringup started nic names had not standardized and so we
+ * had to hard code. (For people interested in history.)
+ */
+#define KLTYPE_XTHD   	(KLCLASS_PSEUDO_GFX | 0x9)
+
+#define KLTYPE_UNKNOWN	(KLCLASS_UNKNOWN | 0xf)
+
+#define KLTYPE(_x) 	((_x) & KLTYPE_MASK)
+#define IS_MIO_PRESENT(l)	((l->brd_type == KLTYPE_BASEIO) && \
+				 (l->brd_flags & SECOND_NIC_PRESENT))
+#define IS_MIO_IOC3(l, n)	(IS_MIO_PRESENT(l) && (n > 2))
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+#define LOCAL_BOARD 1
+#define REMOTE_BOARD 2
+
+#define LBOARD_STRUCT_VERSION 	2
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next;         /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	moduleid_t	brd_module;       /* module to which it belongs */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	vertex_hdl_t	brd_graph_link;   /* vertex hdl to connect extern compts */
+	confidence_t	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		brd_name[32];
+} lboard_t;
+
+
+/*
+ *	Make sure we pass back the calias space address for local boards.
+ *	klconfig board traversal and error structure extraction defines.
+ */
+
+#define BOARD_SLOT(_brd)	((_brd)->brd_slot)
+
+#define KLCF_CLASS(_brd)	KLCLASS((_brd)->brd_type)
+#define KLCF_TYPE(_brd)		KLTYPE((_brd)->brd_type)
+#define KLCF_REMOTE(_brd)  	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
+#define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
+
+#define KLCF_NEXT(_brd) 	\
+        ((_brd)->brd_next ? 	\
+	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
+	 NULL)
+#define KLCF_COMP(_brd, _ndx)   \
+                (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd),	\
+					       (_brd)->brd_compts[(_ndx)]))
+
+#define KLCF_COMP_ERROR(_brd, _comp)	\
+               (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+
+#define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
+#define KLCF_BRIDGE_W_ID(_comp)	((_comp)->physid)	/* Widget ID */
+
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	COMPONENT	*arcs_compt;      /* ptr to the arcs struct for ease*/
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+#define KLCONFIG_INFO_ENABLED(_i)	((_i)->flags & KLINFO_ENABLE)
+/*
+ * Component structures.
+ * Following are the currently identified components:
+ * 	CPU, HUB, MEM_BANK,
+ * 	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ * 	BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ * 	ROUTER
+ * 	GRAPHICS
+ */
+#define KLSTRUCT_UNKNOWN	0
+#define KLSTRUCT_CPU  		1
+#define KLSTRUCT_HUB  		2
+#define KLSTRUCT_MEMBNK 	3
+#define KLSTRUCT_XBOW 		4
+#define KLSTRUCT_BRI 		5
+#define KLSTRUCT_IOC3 		6
+#define KLSTRUCT_PCI 		7
+#define KLSTRUCT_VME 		8
+#define KLSTRUCT_ROU		9
+#define KLSTRUCT_GFX 		10
+#define KLSTRUCT_SCSI 		11
+#define KLSTRUCT_FDDI 		12
+#define KLSTRUCT_MIO 		13
+#define KLSTRUCT_DISK 		14
+#define KLSTRUCT_TAPE 		15
+#define KLSTRUCT_CDROM 		16
+#define KLSTRUCT_HUB_UART 	17
+#define KLSTRUCT_IOC3ENET 	18
+#define KLSTRUCT_IOC3UART 	19
+#define KLSTRUCT_UNUSED		20 /* XXX UNUSED */
+#define KLSTRUCT_IOC3PCKM       21
+#define KLSTRUCT_RAD        	22
+#define KLSTRUCT_HUB_TTY        23
+#define KLSTRUCT_IOC3_TTY 	24
+
+/* Early Access IO proms are compatible
+   only with KLSTRUCT values upto 24. */
+
+#define KLSTRUCT_FIBERCHANNEL 	25
+#define KLSTRUCT_MOD_SERIAL_NUM 26
+#define KLSTRUCT_IOC3MS         27
+#define KLSTRUCT_TPU            28
+#define KLSTRUCT_GSN_A          29
+#define KLSTRUCT_GSN_B          30
+#define KLSTRUCT_XTHD           31
+
+/*
+ * These are the indices of various components within a lboard structure.
+ */
+
+#define IP27_CPU0_INDEX 0
+#define IP27_CPU1_INDEX 1
+#define IP27_HUB_INDEX 2
+#define IP27_MEM_INDEX 3
+
+#define BASEIO_BRIDGE_INDEX 0
+#define BASEIO_IOC3_INDEX 1
+#define BASEIO_SCSI1_INDEX 2
+#define BASEIO_SCSI2_INDEX 3
+
+#define MIDPLANE_XBOW_INDEX 0
+#define ROUTER_COMPONENT_INDEX 0
+
+#define CH4SCSI_BRIDGE_INDEX 0
+
+/* Info holders for various hardware components */
+
+typedef u64 *pci_t;
+typedef u64 *vmeb_t;
+typedef u64 *vmed_t;
+typedef u64 *fddi_t;
+typedef u64 *scsi_t;
+typedef u64 *mio_t;
+typedef u64 *graphics_t;
+typedef u64 *router_t;
+
+/*
+ * The port info in ip27_cfg area translates to a lboart_t in the
+ * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
+ * is stored in terms of a nasid and a offset from start of KLCONFIG
+ * area  on that nasid.
+ */
+typedef struct klport_s {
+	nasid_t		port_nasid;
+	unsigned char	port_flag;
+	klconf_off_t	port_offset;
+} klport_t;
+
+typedef struct klcpu_s {                          /* CPU */
+	klinfo_t 	cpu_info;
+	unsigned short 	cpu_prid;	/* Processor PRID value */
+	unsigned short 	cpu_fpirr;	/* FPU IRR value */
+	unsigned short 	cpu_speed;	/* Speed in MHZ */
+	unsigned short 	cpu_scachesz;	/* secondary cache size in MB */
+	unsigned short 	cpu_scachespeed;/* secondary cache speed in MHz */
+} klcpu_t ;
+
+#define CPU_STRUCT_VERSION   2
+
+typedef struct klhub_s {			/* HUB */
+	klinfo_t 	hub_info;
+	unsigned int 		hub_flags;		/* PCFG_HUB_xxx flags */
+	klport_t	hub_port;		/* hub is connected to this */
+	nic_t		hub_box_nic;		/* nic of containing box */
+	klconf_off_t	hub_mfg_nic;		/* MFG NIC string */
+	u64		hub_speed;		/* Speed of hub in HZ */
+} klhub_t ;
+
+typedef struct klhub_uart_s {			/* HUB */
+	klinfo_t 	hubuart_info;
+	unsigned int 		hubuart_flags;		/* PCFG_HUB_xxx flags */
+	nic_t		hubuart_box_nic;	/* nic of containing box */
+} klhub_uart_t ;
+
+#define MEMORY_STRUCT_VERSION   2
+
+typedef struct klmembnk_s {			/* MEMORY BANK */
+	klinfo_t 	membnk_info;
+	short 		membnk_memsz;		/* Total memory in megabytes */
+	short		membnk_dimm_select; /* bank to physical addr mapping*/
+	short		membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
+	short		membnk_attr;
+} klmembnk_t ;
+
+#define KLCONFIG_MEMBNK_SIZE(_info, _bank)	\
+                            ((_info)->membnk_bnksz[(_bank)])
+
+
+#define MEMBNK_PREMIUM 1
+#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank)	\
+                            ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+
+#define MAX_SERIAL_NUM_SIZE 10
+
+typedef struct klmod_serial_num_s {
+      klinfo_t        snum_info;
+      union {
+              char snum_str[MAX_SERIAL_NUM_SIZE];
+              unsigned long long       snum_int;
+      } snum;
+} klmod_serial_num_t;
+
+/* Macros needed to access serial number structure in lboard_t.
+   Hard coded values are necessary since we cannot treat
+   serial number struct as a component without losing compatibility
+   between prom versions. */
+
+#define GET_SNUM_COMP(_l) 	((klmod_serial_num_t *)\
+				KLCF_COMP(_l, _l->brd_numcompts))
+
+#define MAX_XBOW_LINKS 16
+
+typedef struct klxbow_s {                          /* XBOW */
+	klinfo_t 	xbow_info ;
+	klport_t	xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
+        int		xbow_master_hub_link;
+        /* type of brd connected+component struct ptr+flags */
+} klxbow_t ;
+
+#define MAX_PCI_SLOTS 8
+
+typedef struct klpci_device_s {
+	s32	pci_device_id;	/* 32 bits of vendor/device ID. */
+	s32	pci_device_pad;	/* 32 bits of padding. */
+} klpci_device_t;
+
+#define BRIDGE_STRUCT_VERSION	2
+
+typedef struct klbri_s {                          /* BRIDGE */
+	klinfo_t 	bri_info ;
+	unsigned char	bri_eprominfo ;    /* IO6prom connected to bridge */
+	unsigned char	bri_bustype ;      /* PCI/VME BUS bridge/GIO */
+	pci_t    	pci_specific  ;    /* PCI Board config info */
+	klpci_device_t	bri_devices[MAX_PCI_DEVS] ;	/* PCI IDs */
+	klconf_off_t	bri_mfg_nic ;
+} klbri_t ;
+
+#define MAX_IOC3_TTY	2
+
+typedef struct klioc3_s {                          /* IOC3 */
+	klinfo_t 	ioc3_info ;
+	unsigned char	ioc3_ssram ;        /* Info about ssram */
+	unsigned char	ioc3_nvram ;        /* Info about nvram */
+	klinfo_t	ioc3_superio ;      /* Info about superio */
+	klconf_off_t	ioc3_tty_off ;
+	klinfo_t	ioc3_enet ;
+	klconf_off_t	ioc3_enet_off ;
+	klconf_off_t	ioc3_kbd_off ;
+} klioc3_t ;
+
+#define MAX_VME_SLOTS 8
+
+typedef struct klvmeb_s {                          /* VME BRIDGE - PCI CTLR */
+	klinfo_t 	vmeb_info ;
+	vmeb_t		vmeb_specific ;
+	klconf_off_t   	vmeb_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmeb_t ;
+
+typedef struct klvmed_s {                          /* VME DEVICE - VME BOARD */
+	klinfo_t	vmed_info ;
+	vmed_t		vmed_specific ;
+	klconf_off_t   	vmed_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+} klvmed_t ;
+
+#define ROUTER_VECTOR_VERS	2
+
+/* XXX - Don't we need the number of ports here?!? */
+typedef struct klrou_s {                          /* ROUTER */
+	klinfo_t 	rou_info ;
+	unsigned int		rou_flags ;           /* PCFG_ROUTER_xxx flags */
+	nic_t		rou_box_nic ;         /* nic of the containing module */
+	klport_t 	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+	klconf_off_t	rou_mfg_nic ;     /* MFG NIC string */
+	u64	rou_vector;	  /* vector from master node */
+} klrou_t ;
+
+/*
+ *  Graphics Controller/Device
+ *
+ *  (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
+ *  used a couple different structures to store graphics information.
+ *  For compatibility reasons, the newer data structure preserves some
+ *  of the layout so that fields that are used in the old versions remain
+ *  in the same place (with the same info).  Determination of what version
+ *  of this structure we have is done by checking the cookie field.
+ */
+#define KLGFX_COOKIE	0x0c0de000
+
+typedef struct klgfx_s {		/* GRAPHICS Device */
+	klinfo_t 	gfx_info;
+	klconf_off_t    old_gndevs;	/* for compatibility with older proms */
+	klconf_off_t    old_gdoff0;	/* for compatibility with older proms */
+	unsigned int		cookie;		/* for compatibility with older proms */
+	unsigned int		moduleslot;
+	struct klgfx_s	*gfx_next_pipe;
+	graphics_t	gfx_specific;
+	klconf_off_t    pad0;		/* for compatibility with older proms */
+	klconf_off_t    gfx_mfg_nic;
+} klgfx_t;
+
+typedef struct klxthd_s {
+	klinfo_t 	xthd_info ;
+	klconf_off_t	xthd_mfg_nic ;        /* MFG NIC string */
+} klxthd_t ;
+
+typedef struct kltpu_s {                     /* TPU board */
+	klinfo_t 	tpu_info ;
+	klconf_off_t	tpu_mfg_nic ;        /* MFG NIC string */
+} kltpu_t ;
+
+typedef struct klgsn_s {                     /* GSN board */
+	klinfo_t 	gsn_info ;
+	klconf_off_t	gsn_mfg_nic ;        /* MFG NIC string */
+} klgsn_t ;
+
+#define MAX_SCSI_DEVS 16
+
+/*
+ * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
+ * to allocate space of type COMPONENT. Make sure that if the size of
+ * any other component struct becomes more than this, then redefine
+ * that as the size to be klmalloced.
+ */
+
+typedef struct klscsi_s {                          /* SCSI Controller */
+	klinfo_t 	scsi_info ;
+	scsi_t       	scsi_specific   ;
+	unsigned char 	scsi_numdevs ;
+	klconf_off_t	scsi_devinfo[MAX_SCSI_DEVS] ;
+} klscsi_t ;
+
+typedef struct klscdev_s {                          /* SCSI device */
+	klinfo_t 	scdev_info ;
+	struct scsidisk_data *scdev_cfg ; /* driver fills up this */
+} klscdev_t ;
+
+typedef struct klttydev_s {                          /* TTY device */
+	klinfo_t 	ttydev_info ;
+	struct terminal_data *ttydev_cfg ; /* driver fills up this */
+} klttydev_t ;
+
+typedef struct klenetdev_s {                          /* ENET device */
+	klinfo_t 	enetdev_info ;
+	struct net_data *enetdev_cfg ; /* driver fills up this */
+} klenetdev_t ;
+
+typedef struct klkbddev_s {                          /* KBD device */
+	klinfo_t 	kbddev_info ;
+	struct keyboard_data *kbddev_cfg ; /* driver fills up this */
+} klkbddev_t ;
+
+typedef struct klmsdev_s {                          /* mouse device */
+        klinfo_t        msdev_info ;
+        void 		*msdev_cfg ;
+} klmsdev_t ;
+
+#define MAX_FDDI_DEVS 10 /* XXX Is this true */
+
+typedef struct klfddi_s {                          /* FDDI */
+	klinfo_t 	fddi_info ;
+	fddi_t        	fddi_specific ;
+	klconf_off_t	fddi_devinfo[MAX_FDDI_DEVS] ;
+} klfddi_t ;
+
+typedef struct klmio_s {                          /* MIO */
+	klinfo_t 	mio_info ;
+	mio_t       	mio_specific   ;
+} klmio_t ;
+
+
+typedef union klcomp_s {
+	klcpu_t		kc_cpu;
+	klhub_t		kc_hub;
+	klmembnk_t 	kc_mem;
+	klxbow_t  	kc_xbow;
+	klbri_t		kc_bri;
+	klioc3_t	kc_ioc3;
+	klvmeb_t	kc_vmeb;
+	klvmed_t	kc_vmed;
+	klrou_t		kc_rou;
+	klgfx_t		kc_gfx;
+	klscsi_t	kc_scsi;
+	klscdev_t	kc_scsi_dev;
+	klfddi_t	kc_fddi;
+	klmio_t		kc_mio;
+	klmod_serial_num_t kc_snum ;
+} klcomp_t;
+
+typedef union kldev_s {      /* for device structure allocation */
+	klscdev_t	kc_scsi_dev ;
+	klttydev_t	kc_tty_dev ;
+	klenetdev_t	kc_enet_dev ;
+	klkbddev_t 	kc_kbd_dev ;
+} kldev_t ;
+
+/* Data structure interface routines. TBD */
+
+/* Include launch info in this file itself? TBD */
+
+/*
+ * TBD - Can the ARCS and device driver related info also be included in the
+ * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
+ * structure, viz private to the IO4prom.
+ */
+
+/*
+ * TBD - Allocation issues.
+ *
+ * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * errinfo and allocate from them, or have a single heap and allocate all
+ * structures from it. Debug is easier in the former method since we can
+ * dump all similar structs in one command, but there will be lots of holes,
+ * in memory and max limits are needed for number of structures.
+ * Another way to make it organized, is to have a union of all components
+ * and allocate a aligned chunk of memory greater than the biggest
+ * component.
+ */
+
+typedef union {
+	lboard_t *lbinfo ;
+} biptr_t ;
+
+
+#define BRI_PER_XBOW 6
+#define PCI_PER_BRI  8
+#define DEV_PER_PCI  16
+
+
+/* Virtual dipswitch values (starting from switch "7"): */
+
+#define VDS_NOGFX		0x8000	/* Don't enable gfx and autoboot */
+#define VDS_NOMP		0x100	/* Don't start slave processors */
+#define VDS_MANUMODE		0x80	/* Manufacturing mode */
+#define VDS_NOARB		0x40	/* No bootmaster arbitration */
+#define VDS_PODMODE		0x20	/* Go straight to POD mode */
+#define VDS_NO_DIAGS		0x10	/* Don't run any diags after BM arb */
+#define VDS_DEFAULTS		0x08	/* Use default environment values */
+#define VDS_NOMEMCLEAR		0x04	/* Don't run mem cfg code */
+#define VDS_2ND_IO4		0x02	/* Boot from the second IO4 */
+#define VDS_DEBUG_PROM		0x01	/* Print PROM debugging messages */
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
+extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
+
+
+extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
+
+#endif /* _ASM_SN_KLCONFIG_H */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
new file mode 100644
index 0000000..1327e12
--- /dev/null
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -0,0 +1,217 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLDIR_H
+#define _ASM_SN_KLDIR_H
+
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas.  This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them.  Indices in the array are
+ * permanently dedicated to areas listed below.  Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+#define KLDIR_MAGIC		0x434d5f53505f5357
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ *                                    MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M)         +-----------------------------------------+
+ *                         |      IO6 BUFFERS FOR FLASH ENET IOC3    |
+ * 0x1F80000 (31.5M)       +-----------------------------------------+
+ *                         |      IO6 TEXT/DATA/BSS/stack            |
+ * 0x1C00000 (30M)         +-----------------------------------------+
+ *                         |      IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M)         +-----------------------------------------+
+ *                         |      IP27 PROM TEXT/DATA/BSS/stack      |
+ * 0x1B00000 (27M)         +-----------------------------------------+
+ *                         |      IP27 CFG                           |
+ * 0x1A00000 (26M)         +-----------------------------------------+
+ *                         |      Graphics PROM                      |
+ * 0x1800000 (24M)         +-----------------------------------------+
+ *                         |      3rd Party PROM drivers             |
+ * 0x1600000 (22M)         +-----------------------------------------+
+ *                         |                                         |
+ *                         |      Free                               |
+ *                         |                                         |
+ *                         +-----------------------------------------+
+ *                         |      UNIX DEBUG Version                 |
+ * 0x190000 (2M--)         +-----------------------------------------+
+ *                         |      SYMMON                             |
+ *                         |      (For UNIX Debug only)              |
+ * 0x34000 (208K)          +-----------------------------------------+
+ *                         |      SYMMON STACK [NUM_CPU_PER_NODE]    |
+ *                         |      (For UNIX Debug only)              |
+ * 0x25000 (148K)          +-----------------------------------------+
+ *                         |      KLCONFIG - II (temp)               |
+ *                         |                                         |
+ *                         |    ----------------------------         |
+ *                         |                                         |
+ *                         |      UNIX NON-DEBUG Version             |
+ * 0x19000 (100K)          +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K)          +-----------------------------------------+
+ *                         |                                         |
+ *                         |      PI Error Spools (32K)              |
+ *                         |                                         |
+ * 0x12000 (72K)           +-----------------------------------------+
+ *                         |      Unused                             |
+ * 0x11c00 (71K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Eframe area       	     |
+ * 0x11a00 (70.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Eframe area       	     |
+ * 0x11800 (70K)           +-----------------------------------------+
+ *                         |      CPU 1 NMI Register save area       |
+ * 0x11600 (69.5K)         +-----------------------------------------+
+ *                         |      CPU 0 NMI Register save area       |
+ * 0x11400 (69K)           +-----------------------------------------+
+ *                         |      GDA (1k)                           |
+ * 0x11000 (68K)           +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x10800  (66k)	   +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x10400 (65K)           +-----------------------------------------+
+ *                         |      Exception Handlers (UALIAS copy)   |
+ * 0x10000 (64K)           +-----------------------------------------+
+ *                         |                                         |
+ *                         |                                         |
+ *                         |      KLCONFIG - I (permanent) (48K)     |
+ *                         |                                         |
+ *                         |                                         |
+ *                         |                                         |
+ * 0x4000 (16K)            +-----------------------------------------+
+ *                         |      NMI Handler (Protected Page)       |
+ * 0x3000 (12K)            +-----------------------------------------+
+ *                         |      ARCS PVECTORS (master node only)   |
+ * 0x2c00 (11K)            +-----------------------------------------+
+ *                         |      ARCS TVECTORS (master node only)   |
+ * 0x2800 (10K)            +-----------------------------------------+
+ *                         |      LAUNCH [NUM_CPU]                   |
+ * 0x2400 (9K)             +-----------------------------------------+
+ *                         |      Low memory directory (KLDIR)       |
+ * 0x2000 (8K)             +-----------------------------------------+
+ *                         |      ARCS SPB (1K)                      |
+ * 0x1000 (4K)             +-----------------------------------------+
+ *                         |      Early cache Exception stack        |
+ *                         |             and/or                      |
+ *			   |      kernel/io6prom nmi registers	     |
+ * 0x800  (2k)	           +-----------------------------------------+
+ *			   |      cache error eframe   	 	     |
+ * 0x400 (1K)              +-----------------------------------------+
+ *                         |      Exception Handlers                 |
+ * 0x0   (0K)              +-----------------------------------------+
+ */
+
+#ifdef __ASSEMBLY__
+#define KLDIR_OFF_MAGIC			0x00
+#define KLDIR_OFF_OFFSET		0x08
+#define KLDIR_OFF_POINTER		0x10
+#define KLDIR_OFF_SIZE			0x18
+#define KLDIR_OFF_COUNT			0x20
+#define KLDIR_OFF_STRIDE		0x28
+#endif /* __ASSEMBLY__ */
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here.  Since it's set up in the prom.  We can't redefine it later
+ * and expect more space to be allocated.  The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE		0x8000
+
+#if defined(PROM)
+
+/*
+ * These defines are prom version dependent.  No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET		0x2400
+#define IP27_LAUNCH_SIZE		0x400
+#define IP27_LAUNCH_COUNT		2
+#define IP27_LAUNCH_STRIDE		0x200
+
+#define IP27_KLCONFIG_OFFSET		0x4000
+#define IP27_KLCONFIG_SIZE		0xc000
+#define IP27_KLCONFIG_COUNT		1
+#define IP27_KLCONFIG_STRIDE		0
+
+#define IP27_NMI_OFFSET			0x3000
+#define IP27_NMI_SIZE			0x40
+#define IP27_NMI_COUNT			2
+#define IP27_NMI_STRIDE			0x40
+
+#define IP27_PI_ERROR_OFFSET		0x12000
+#define IP27_PI_ERROR_SIZE		0x4000
+#define IP27_PI_ERROR_COUNT		1
+#define IP27_PI_ERROR_STRIDE		0
+
+#define IP27_SYMMON_STK_OFFSET		0x25000
+#define IP27_SYMMON_STK_SIZE		0xe000
+#define IP27_SYMMON_STK_COUNT		2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE		0x7000
+
+#define IP27_FREEMEM_OFFSET		0x19000
+#define IP27_FREEMEM_SIZE		-1
+#define IP27_FREEMEM_COUNT		1
+#define IP27_FREEMEM_STRIDE		0
+
+#endif /* PROM */
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET			0x11000
+#define IO6_GDA_SIZE			0x400
+#define IO6_GDA_COUNT			1
+#define IO6_GDA_STRIDE			0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET		0x11400
+#define IP27_NMI_KREGS_CPU_SIZE		0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET		0x11800
+#define IP27_NMI_EFRAME_SIZE		0x200
+
+#define KLDIR_ENT_SIZE			0x40
+#define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
+
+#ifndef __ASSEMBLY__
+typedef struct kldir_ent_s {
+	u64		magic;		/* Indicates validity of entry      */
+	off_t		offset;		/* Offset from start of node space  */
+	unsigned long	pointer;	/* Pointer to area in some cases    */
+	size_t		size;		/* Size in bytes 		    */
+	u64		count;		/* Repeat count if array, 1 if not  */
+	size_t		stride;		/* Stride if array, 0 if not        */
+	char		rsvd[16];	/* Pad entry to 0x40 bytes          */
+	/* NOTE: These 16 bytes are used in the Partition KLDIR
+	   entry to store partition info. Refer to klpart.h for this. */
+} kldir_ent_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h
new file mode 100644
index 0000000..5de4c5e
--- /dev/null
+++ b/arch/mips/include/asm/sn/klkernvars.h
@@ -0,0 +1,29 @@
+/*
+ * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_KLKERNVARS_H
+#define __ASM_SN_KLKERNVARS_H
+
+#define KV_MAGIC_OFFSET		0x0
+#define KV_RO_NASID_OFFSET	0x4
+#define KV_RW_NASID_OFFSET	0x6
+
+#define KV_MAGIC		0x5f4b565f
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sn/types.h>
+
+typedef struct kern_vars_s {
+	int		kv_magic;
+	nasid_t		kv_ro_nasid;
+	nasid_t		kv_rw_nasid;
+	unsigned long	kv_ro_baseaddr;
+	unsigned long	kv_rw_baseaddr;
+} kern_vars_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_SN_KLKERNVARS_H */
+
diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h
new file mode 100644
index 0000000..b7c2226
--- /dev/null
+++ b/arch/mips/include/asm/sn/launch.h
@@ -0,0 +1,106 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2000 by Colin Ngam
+ */
+#ifndef _ASM_SN_LAUNCH_H
+#define _ASM_SN_LAUNCH_H
+
+#include <asm/sn/types.h>
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, then returns to the slave loop.  The master may poll or wait
+ * for the slaves to finish.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per local CPU.
+ */
+
+#define LAUNCH_MAGIC		0xaddbead2addbead3
+#ifdef CONFIG_SGI_IP27
+#define LAUNCH_SIZEOF		0x100
+#define LAUNCH_PADSZ		0xa0
+#endif
+
+#define LAUNCH_OFF_MAGIC	0x00	/* Struct offsets for assembly      */
+#define LAUNCH_OFF_BUSY		0x08
+#define LAUNCH_OFF_CALL		0x10
+#define LAUNCH_OFF_CALLC	0x18
+#define LAUNCH_OFF_CALLPARM	0x20
+#define LAUNCH_OFF_STACK	0x28
+#define LAUNCH_OFF_GP		0x30
+#define LAUNCH_OFF_BEVUTLB	0x38
+#define LAUNCH_OFF_BEVNORMAL	0x40
+#define LAUNCH_OFF_BEVECC	0x48
+
+#define LAUNCH_STATE_DONE	0	/* Return value of LAUNCH_POLL      */
+#define LAUNCH_STATE_SENT	1
+#define LAUNCH_STATE_RECD	2
+
+/*
+ * The launch routine is called only if the complement address is correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ * The slave_launch routine turns on the BUSY flag, and the slave loop
+ * clears the BUSY flag after control is returned to it.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef int launch_state_t;
+typedef void (*launch_proc_t)(u64 call_parm);
+
+typedef struct launch_s {
+	volatile u64		magic;	/* Magic number                     */
+	volatile u64		busy;	/* Slave currently active           */
+	volatile launch_proc_t	call_addr;	/* Func. for slave to call  */
+	volatile u64		call_addr_c;	/* 1's complement of call_addr*/
+	volatile u64		call_parm;	/* Single parm passed to call*/
+	volatile void *stack_addr;	/* Stack pointer for slave function */
+	volatile void *gp_addr;		/* Global pointer for slave func.   */
+	volatile char 		*bevutlb;/* Address of bev utlb ex handler   */
+	volatile char 		*bevnormal;/*Address of bev normal ex handler */
+	volatile char 		*bevecc;/* Address of bev cache err handler */
+	volatile char		pad[160];	/* Pad to LAUNCH_SIZEOF	    */
+} launch_t;
+
+/*
+ * PROM entry points for launch routines are determined by IPxxprom/start.s
+ */
+
+#define LAUNCH_SLAVE	(*(void (*)(int nasid, int cpu, \
+				    launch_proc_t call_addr, \
+				    u64 call_parm, \
+				    void *stack_addr, \
+				    void *gp_addr)) \
+			 IP27PROM_LAUNCHSLAVE)
+
+#define LAUNCH_WAIT	(*(void (*)(int nasid, int cpu, int timeout_msec)) \
+			 IP27PROM_WAITSLAVE)
+
+#define LAUNCH_POLL	(*(launch_state_t (*)(int nasid, int cpu)) \
+			 IP27PROM_POLLSLAVE)
+
+#define LAUNCH_LOOP	(*(void (*)(void)) \
+			 IP27PROM_SLAVELOOP)
+
+#define LAUNCH_FLASH	(*(void (*)(void)) \
+			 IP27PROM_FLASHLEDS)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_LAUNCH_H */
diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h
new file mode 100644
index 0000000..721496a
--- /dev/null
+++ b/arch/mips/include/asm/sn/mapped_kernel.h
@@ -0,0 +1,54 @@
+/*
+ * File created by Kanoj Sarcar 06/06/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_MAPPED_KERNEL_H
+#define __ASM_SN_MAPPED_KERNEL_H
+
+#include <linux/mmzone.h>
+
+/*
+ * Note on how mapped kernels work: the text and data section is
+ * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
+ * init/setup/data section gets a 16M virtual address bump in the
+ * ld.script file (so that tlblo0 and tlblo1 maps the sections).
+ * The vmlinux.64 section addresses are put in the xkseg range
+ * using the change-addresses makefile option. Use elfdump -of
+ * on IRIX to see where the sections go. The Origin loader loads
+ * the two sections contiguously in physical memory. The loader
+ * sets the entry point into kernel_entry using a xkphys address,
+ * but instead of using 0xa800000001160000, it uses the address
+ * 0xa800000000160000, which is where it physically loaded that
+ * code. So no jumps can be done before we have switched to using
+ * cksseg addresses.
+ */
+#include <asm/addrspace.h>
+
+#define REP_BASE	CAC_BASE
+
+#ifdef CONFIG_MAPPED_KERNEL
+
+#define MAPPED_ADDR_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_ADDR_RW_TO_PHYS(x)	(x - REP_BASE - 16777216)
+
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
+
+#define MAPPED_KERN_RO_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
+				MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid()))
+#define MAPPED_KERN_RW_TO_PHYS(x) \
+				((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \
+				MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid()))
+
+#else /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_PHYS(x)	(x - REP_BASE)
+#define MAPPED_KERN_RW_TO_PHYS(x)	(x - REP_BASE)
+
+#endif /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
+#define MAPPED_KERN_RW_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
+
+#endif /* __ASM_SN_MAPPED_KERNEL_H  */
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
new file mode 100644
index 0000000..6b7b0b5
--- /dev/null
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_NMI_H
+#define __ASM_SN_NMI_H
+
+#ident "$Revision: 1.5 $"
+
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor.  The slave calls the desired
+ * function, followed by an optional rendezvous function, then returns to
+ * the slave loop.  The master does not wait for the slaves before
+ * returning.
+ *
+ * There is an array of launch structures, one per CPU on the node.  One
+ * interrupt level is used per CPU.
+ */
+
+#define NMI_MAGIC		0x48414d4d455201
+#define NMI_SIZEOF		0x40
+
+#define NMI_OFF_MAGIC		0x00	/* Struct offsets for assembly      */
+#define NMI_OFF_FLAGS		0x08
+#define NMI_OFF_CALL		0x10
+#define NMI_OFF_CALLC		0x18
+#define NMI_OFF_CALLPARM	0x20
+#define NMI_OFF_GMASTER		0x28
+
+/*
+ * The NMI routine is called only if the complement address is
+ * correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct nmi_s {
+	volatile unsigned long	 magic;		/* Magic number */
+	volatile unsigned long	 flags;		/* Combination of flags above */
+	volatile void *call_addr;	/* Routine for slave to call        */
+	volatile void *call_addr_c;	/* 1's complement of address        */
+	volatile void *call_parm;	/* Single parm passed to call	    */
+	volatile unsigned long	 gmaster;	/* Flag true only on global master*/
+} nmi_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Following definitions are needed both in the prom & the kernel
+ * to identify the format of the nmi cpu register save area in the
+ * low memory on each node.
+ */
+#ifndef __ASSEMBLY__
+
+struct reg_struct {
+	unsigned long	gpr[32];
+	unsigned long	sr;
+	unsigned long	cause;
+	unsigned long	epc;
+	unsigned long	badva;
+	unsigned long	error_epc;
+	unsigned long	cache_err;
+	unsigned long	nmi_sr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* These are the assembly language offsets into the reg_struct structure */
+
+#define R0_OFF		0x0
+#define R1_OFF		0x8
+#define R2_OFF		0x10
+#define R3_OFF		0x18
+#define R4_OFF		0x20
+#define R5_OFF		0x28
+#define R6_OFF		0x30
+#define R7_OFF		0x38
+#define R8_OFF		0x40
+#define R9_OFF		0x48
+#define R10_OFF		0x50
+#define R11_OFF		0x58
+#define R12_OFF		0x60
+#define R13_OFF		0x68
+#define R14_OFF		0x70
+#define R15_OFF		0x78
+#define R16_OFF		0x80
+#define R17_OFF		0x88
+#define R18_OFF		0x90
+#define R19_OFF		0x98
+#define R20_OFF		0xa0
+#define R21_OFF		0xa8
+#define R22_OFF		0xb0
+#define R23_OFF		0xb8
+#define R24_OFF		0xc0
+#define R25_OFF		0xc8
+#define R26_OFF		0xd0
+#define R27_OFF		0xd8
+#define R28_OFF		0xe0
+#define R29_OFF		0xe8
+#define R30_OFF		0xf0
+#define R31_OFF		0xf8
+#define SR_OFF		0x100
+#define CAUSE_OFF	0x108
+#define EPC_OFF		0x110
+#define BADVA_OFF	0x118
+#define ERROR_EPC_OFF	0x120
+#define CACHE_ERR_OFF	0x128
+#define NMISR_OFF	0x130
+
+#endif /* __ASM_SN_NMI_H */
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
new file mode 100644
index 0000000..b061900
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -0,0 +1,288 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture.  It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ *	 files.  Please bracket any language-dependent definitions
+ *	 appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C.  They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory).  We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+
+#define NODE_SIZE_BITS		31
+#define BWIN_SIZE_BITS		28
+
+#define NASID_BITS		9
+#define NASID_BITMASK		(0x1ffLL)
+#define NASID_SHFT		31
+#define NASID_META_BITS		5
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS		32
+#define BWIN_SIZE_BITS		29
+
+#define NASID_BITMASK		(0xffLL)
+#define NASID_BITS		8
+#define NASID_SHFT		32
+#define NASID_META_BITS		4
+#define NASID_LOCAL_BITS	4
+
+#define BDDIR_UPPER_MASK	(UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK	(UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE	(UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK		(UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
+					NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__)
+
+#define NODE_SWIN_BASE(nasid, widget)					\
+	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
+	: RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ */
+#define NODE_SWIN_BASE(nasid, widget) \
+     (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS		3
+#define BWIN_SIZE		(UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define	BWIN_SIZEMASK		(BWIN_SIZE - 1)
+#define	BWIN_WIDGET_MASK	0x7
+#define NODE_BWIN_BASE0(nasid)	(NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin)	(NODE_BWIN_BASE0(nasid) + 	\
+			(UINT64_CAST(bigwin) << BWIN_SIZE_BITS))
+
+#define	BWIN_WIDGETADDR(addr)	((addr) & BWIN_SIZEMASK)
+#define	BWIN_WINDOWNUM(addr)	(((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define	NODE_BWIN_ADDR(nasid, addr)	\
+		(((addr) >= NODE_BWIN_BASE0(nasid)) && \
+		 ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+				BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ *	CALIAS -- Varies in size, points to the first n bytes of memory
+ *		  	on the reader's node.
+ */
+
+#define CALIAS_BASE		CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off)	((volatile bridgereg_t *) \
+	((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid)	(NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#define SABLE_LOG_TRIGGER(_map)
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice)					\
+                    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + 	\
+				  (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE		PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE		0x200000
+
+#define DIAG_BASE		PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE		0x300000
+
+#define ROUTE_BASE		PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE		0x200000
+
+#define IP27PROM_FLASH_HDR	PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA	PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX	32
+#define IP27PROM_CORP		PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE	0x10000
+#define IP27PROM_CORP_STK	PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE	0x2000
+#define IP27PROM_DECOMP_BUF	PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE	0xfff00
+
+#define IP27PROM_BASE		PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED	(UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX	0x100000
+
+#define IP27PROM_PCFG		PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE	0xd0000
+#define IP27PROM_ERRDMP		PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE	0xf000
+
+#define IP27PROM_INIT_START	PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE	PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE	0x200
+#define IP27PROM_NETUART	PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE	0x100
+#define IP27PROM_UNUSED1	PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE	0x500
+#define IP27PROM_ELSC_BASE_A	PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B	PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A	PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B	PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT	16
+#define IP27PROM_STACK_SIZE	(1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END	PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE		PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE		0x40000
+
+#define ENETBUFS_BASE		PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE		0x20000
+
+#define IO6PROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE		0x400000
+#define	IO6PROM_BASE_MAPPED	(UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE		PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE		0x200000
+
+#define NODEBUGUNIX_ADDR	PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR		PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH	10	/* and 11 */
+#define IP27PROM_INT_NETUART	12	/* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT	10
+#define IP27PROM_ELSC_SIZE	(1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE		PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT	14	/* stack per cpu */
+#define IO6PROM_STACK_SIZE	(1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY		PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART	PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP	PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE	PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD	PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS	PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD		PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE	PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE	PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE	PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE	LOCAL_HUB_ADDR(MD_UREG0_0)	/* base of UART regs */
+#define KL_UART_CMD	LOCAL_HUB_ADDR(MD_UREG0_0)	/* UART command reg */
+#define KL_UART_DATA	LOCAL_HUB_ADDR(MD_UREG0_1)	/* UART data reg */
+#define KL_I2C_REG	MD_UREG0_0			/* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined(HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME	0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME	0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME	(CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR	(0x1000 - 32)	/* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR	(0x1000 - 40)
+#define CACHE_ERR_SP		(CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE	(ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif	/* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#if defined(HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER	IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR	LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR	TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+				/* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET	((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h
new file mode 100644
index 0000000..f734f20
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/arch.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_ARCH_H
+#define _ASM_SN_SN0_ARCH_H
+
+
+#ifndef SN0XXL  /* 128 cpu SMP max */
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ */
+#define MAX_COMPACT_NODES       64
+
+/*
+ * MAXCPUS refers to the maximum number of CPUs in a single kernel.
+ * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
+ */
+#define MAXCPUS                 128
+
+#else /* SN0XXL system */
+
+#define MAX_COMPACT_NODES       128
+#define MAXCPUS                 256
+
+#endif /* SN0XXL */
+
+/*
+ * This is the maximum number of NASIDS that can be present in a system.
+ * (Highest NASID plus one.)
+ */
+#define MAX_NASIDS		256
+
+/*
+ * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
+ */
+#define	MAX_REGIONS		64
+#define MAX_NONPREMIUM_REGIONS  16
+#define MAX_PREMIUM_REGIONS     MAX_REGIONS
+
+/*
+ * MAX_PARITIONS refers to the maximum number of logically defined
+ * partitions the system can support.
+ */
+#define MAX_PARTITIONS		MAX_REGIONS
+
+#define NASID_MASK_BYTES	((MAX_NASIDS + 7) / 8)
+
+/*
+ * Slot constants for SN0
+ */
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MAX_MEM_SLOTS   16                      /* max slots per node */
+#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
+#define MAX_MEM_SLOTS   32                      /* max slots per node */
+#endif /* CONFIG_SGI_SN_M_MODE */
+
+#define SLOT_SHIFT      	(27)
+#define SLOT_MIN_MEM_SIZE	(32*1024*1024)
+
+#define CPUS_PER_NODE		2	/* CPUs on a single hub */
+#define CPUS_PER_NODE_SHFT	1	/* Bits to shift in the node number */
+#define CPUS_PER_SUBNODE	2	/* CPUs on a single hub PI */
+
+#endif /* _ASM_SN_SN0_ARCH_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
new file mode 100644
index 0000000..3e228f8
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUB_H
+#define _ASM_SN_SN0_HUB_H
+
+/* The secret password; used to release protection */
+#define HUB_PASSWORD		0x53474972756c6573ull
+
+#define CHIPID_HUB		0
+#define CHIPID_ROUTER		1
+
+#define HUB_REV_1_0		1
+#define HUB_REV_2_0		2
+#define HUB_REV_2_1		3
+#define HUB_REV_2_2		4
+#define HUB_REV_2_3             5
+#define HUB_REV_2_4             6
+
+#define MAX_HUB_PATH		80
+
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubpi.h>
+#include <asm/sn/sn0/hubmd.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/sn0/hubni.h>
+//#include <asm/sn/sn0/hubcore.h>
+
+/* Translation of uncached attributes */
+#define	UATTR_HSPEC	0
+#define	UATTR_IO	1
+#define	UATTR_MSPEC	2
+#define	UATTR_UNCAC	3
+
+#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
new file mode 100644
index 0000000..d0c29d4
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -0,0 +1,972 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SGI_SN_SN0_HUBIO_H
+#define	_ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET		IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT		IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL		IIO_WCR	     /* Widget control register */
+#define IIO_WIDGET_TOUT		IIO_WRTO     /* Widget request timeout */
+#define IIO_WIDGET_FLUSH	IIO_WTFR     /* Widget target flush */
+#define IIO_PROTECT		IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD	IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS	IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS	IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK	IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR		IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG		IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT	IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT	IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR		IIO_IECLR    /* IO error clear */
+#define IIO_BTE_CRB_CNT         IIO_IBCN     /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define	IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
+#define	IIO_LLP_CSR_LLP_STAT_SHFT	12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY	0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0		IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0		IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0		IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 	IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0		IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0		0	     /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1	IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT		0
+#define BTEOFF_SRC		(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST		(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL		(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY		(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT		(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference.  When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE	0x400000
+#define IIO_BASE_BTE0	0x410000
+#define IIO_BASE_BTE1	0x420000
+#define IIO_BASE_PERF	0x430000
+#define IIO_PERF_CNT	0x430008
+
+#define IO_PERF_SETS	32
+
+#define IIO_WID		0x400000	/* Widget identification */
+#define IIO_WSTAT	0x400008	/* Widget status */
+#define IIO_WCR		0x400020	/* Widget control */
+
+#define	IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define	IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define	IIO_WSTAT_TXRETRY_MASK	(0x7F)
+#define	IIO_WSTAT_TXRETRY_SHFT	(16)
+#define	IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+					  IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR	0x400100	/* Local Access Protection */
+#define IIO_ILAPO	0x400108	/* Protection override */
+#define IIO_IOWA	0x400110	/* outbound widget access */
+#define IIO_IIWA	0x400118	/* inbound widget access */
+#define IIO_IIDEM	0x400120	/* Inbound Device Error Mask */
+#define IIO_ILCSR	0x400128	/* LLP control and status */
+#define IIO_ILLR	0x400130	/* LLP Log */
+#define IIO_IIDSR	0x400138	/* Interrupt destination */
+
+#define IIO_IIBUSERR	0x1400208	/* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT	28
+#define IIO_IIDSR_SENT_MASK	0x10000000
+#define IIO_IIDSR_ENB_SHIFT	24
+#define IIO_IIDSR_ENB_MASK	0x01000000
+#define IIO_IIDSR_NODE_SHIFT	8
+#define IIO_IIDSR_NODE_MASK	0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT	0
+#define IIO_IIDSR_LVL_MASK	0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0	0x400140	/* gfx node/widget register 0 */
+#define IIO_IGFX_1	0x400148	/* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_N_NUM_BITS	9	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	4
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_VLD_BITS	1	/* size of valid field */
+#define IIO_IGFX_VLD_MASK	((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT	20
+#define IIO_IGFX_INIT(widget, node, cpu, valid)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
+	(((valid)  & IIO_IGFX_VLD_MASK)   << IIO_IGFX_VLD_SHIFT)	 )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0	0x400150
+#define	IIO_SCRATCH_REG1	0x400158
+#define IIO_SCRATCH_MASK	0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0	0x0000000800000000
+#define IIO_SCRATCH_BIT0_1	0x0000000400000000
+#define IIO_SCRATCH_BIT0_2	0x0000000200000000
+#define IIO_SCRATCH_BIT0_3	0x0000000100000000
+#define IIO_SCRATCH_BIT0_4	0x0000000000800000
+#define IIO_SCRATCH_BIT0_5	0x0000000000400000
+#define IIO_SCRATCH_BIT0_6	0x0000000000200000
+#define IIO_SCRATCH_BIT0_7	0x0000000000100000
+#define IIO_SCRATCH_BIT0_8	0x0000000000010000
+#define IIO_SCRATCH_BIT0_9	0x0000000000001000
+#define IIO_SCRATCH_BIT0_R	0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES	7		/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW	IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN		HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET	0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+	u64	wid_reg_value;
+	struct {
+		u64 	wid_rsvd: 	32,	/* unused */
+			wid_rev_num:	 4,	/* revision number */
+			wid_part_num:	16,	/* the widget type: hub=c101 */
+			wid_mfg_num:	11,	/* Manufacturer id (IBM) */
+			wid_rsvd1:	 1;	/* Reserved */
+        } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+	u64	wcr_reg_value;
+	struct {
+		u64 	wcr_rsvd: 	41,	/* unused */
+			wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_dir_con:	 1,	/* widget direct connect */
+			wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+			wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+			wcr_rsvd1:	 8,	/* Reserved */
+			wcr_tag_mode:    1,	/* Tag mode */
+			wcr_widget_id:	 4;	/* LLP crossbar credit */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define	iwcr_dir_con	wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+	u64      reg_value;
+	struct {
+		u64	rsvd1:		31,
+			crazy:		 1,	/* Crazy bit		*/
+			rsvd2:		 8,
+			llp_tx_cnt:	 8, 	/* LLP Xmit retry counter */
+			rsvd3:		 6,
+			tx_max_rtry:	 1,	/* LLP Retry Timeout Signal */
+			rsvd4:		 2,
+			xt_tail_to:	 1,	/* Xtalk Tail Timeout	*/
+			xt_crd_to:	 1,	/* Xtalk Credit Timeout	*/
+			pending:	 4;	/* Pending Requests	*/
+	} wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+	u64	icsr_reg_value;
+	struct {
+		u64 	icsr_rsvd: 	22,	/* unused */
+			icsr_max_burst:	10,	/* max burst */
+                        icsr_rsvd4:	 6,	/* reserved */
+			icsr_max_retry:	10,	/* max retry */
+                        icsr_rsvd3:	 2,	/* reserved */
+                        icsr_lnk_stat:	 2,	/* link status */
+                        icsr_bm8:	 1,	/* Bit mode 8 */
+                        icsr_llp_en:	 1,	/* LLP enable bit */
+			icsr_rsvd2:	 1,     /* reserver */
+                        icsr_wrm_reset:	 1,	/* Warm reset bit */
+			icsr_rsvd1:	 2,	/* Data ready offset */
+                        icsr_null_to:	 6;	/* Null timeout   */
+
+        } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+	u64	iowa_reg_value;
+	struct {
+		u64 	iowa_rsvd: 	48,	/* unused */
+			iowa_wxoac:	 8,	/* xtalk widget access bits */
+			iowa_rsvd1:	 7,	/* xtalk widget access bits */
+			iowa_w0oac:	 1;	/* xtalk widget access bits */
+        } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+	u64	iiwa_reg_value;
+	struct {
+		u64 	iiwa_rsvd: 	48,	/* unused */
+			iiwa_wxiac:	 8,	/* hub wid access bits */
+			iiwa_rsvd1:	 7,	/* reserved */
+			iiwa_w0iac:	 1;	/* hub wid0 access */
+        } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union	hubii_illr_u {
+	u64	illr_reg_value;
+	struct {
+		u64 	illr_rsvd: 	32,	/* unused */
+			illr_cb_cnt:	16,	/* checkbit error count */
+			illr_sn_cnt:	16;	/* sequence number count */
+        } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 	perf_rsvd  : 48,
+			perf_icct  :  8,
+			perf_ippr1 :  4,
+			perf_ippr0 :  4;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64	perf_cnt;
+	struct {
+		u64	perf_rsvd1 : 32,
+			perf_rsvd2 : 12,
+			perf_cnt   : 20;
+	} perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING	0x2
+
+#define IIO_LLP_CB_MAX	0xffff
+#define IIO_LLP_SN_MAX	0xffff
+
+/* IO PRB Entries */
+#define	IIO_NUM_IPRBS	(9)
+#define IIO_IOPRB_0	0x400198	/* PRB entry 0 */
+#define IIO_IOPRB_8	0x4001a0	/* PRB entry 8 */
+#define IIO_IOPRB_9	0x4001a8	/* PRB entry 9 */
+#define IIO_IOPRB_A	0x4001b0	/* PRB entry a */
+#define IIO_IOPRB_B	0x4001b8	/* PRB entry b */
+#define IIO_IOPRB_C	0x4001c0	/* PRB entry c */
+#define IIO_IOPRB_D	0x4001c8	/* PRB entry d */
+#define IIO_IOPRB_E	0x4001d0	/* PRB entry e */
+#define IIO_IOPRB_F	0x4001d8	/* PRB entry f */
+
+
+#define IIO_IXCC	0x4001e0	/* Crosstalk credit count timeout */
+#define IIO_IXTCC	IIO_IXCC
+#define IIO_IMEM	0x4001e8	/* Miscellaneous Enable Mask */
+#define IIO_IXTT	0x4001f0	/* Crosstalk tail timeout */
+#define IIO_IECLR	0x4001f8	/* IO error clear */
+#define IIO_IBCN        0x400200        /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1 << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1 << 8)        /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA	0x400300	/* PRB Counter adjust */
+#define IIO_NUM_PRTES	8		/* Total number of PRB table entries */
+#define IIO_PRTE_0	0x400308	/* PIO Read address table entry 0 */
+#define IIO_PRTE(_x)	(IIO_PRTE_0 + (8 * (_x)))
+#define	IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR	0x400388	/* PIO table entry deallocation */
+#define IIO_ICDR	0x400390	/* CRB Entry Deallocation */
+#define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
+#define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
+#define IIO_IMMR	IIO_IIAP
+#define IIO_ICMR	0x4003a8	/* CRB Management Register */
+#define IIO_ICCR	0x4003b0	/* CRB Control Register */
+#define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
+#define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT	36
+#define IIO_ICMR_PC_VLD_MASK	(0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT	20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT	16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT	4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT	0
+#define IIO_ICMR_P_CNT_MASK	(0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define	IIO_IPDR_PND	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define	IIO_ICDR_PND	(1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ * 	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS		15	/* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS     12	/* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 	4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET		8
+#define IIO_ICRB_0		0x400400
+/* XXX - This is now tuneable:
+	#define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	(IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x)  (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x)	(IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x)  (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+	u64	reg_value;
+	struct {
+		u64 	resvd: 	6,
+			stall_bte0: 1,	/* Stall BTE 0 */
+			stall_bte1: 1,	/* Stall BTE 1 */
+			error:	1,	/* CRB has an error	*/
+			ecode:	3,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+	u64	reg_value;
+
+	struct {
+		u64 	resvd: 	6,
+			unused:	1,	/* Unused but RW!!	*/
+			error:	1,	/* CRB has an error	*/
+			ecode:	4,	/* Error Code 		*/
+			lnetuce: 1,	/* SN0net Uncorrectable error */
+			mark:	1,	/* CRB Has been marked 	*/
+			xerr:	1,	/* Error bit set in xtalk header */
+			sidn:	4,	/* SIDN field from xtalk	*/
+			tnum: 	5,	/* TNUM field in xtalk		*/
+			addr:	38,	/* Address of request	*/
+			valid:	1,	/* Valid status		*/
+			iow:	1;	/* IO Write operation	*/
+	} h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right?  Check the spec. */
+#define ICRBN_A_CERR_SHFT	54
+#define ICRBN_A_ERR_MASK	0x3ff
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define	IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
+#define	IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
+#define	IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line.
+					 */
+#define	IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
+#define	IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
+#define	IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
+#define	IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
+#define	IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	5,
+		btenum:	1,	/* BTE to which entry belongs to */
+		cohtrans: 1,	/* Coherent transaction	*/
+		xtsize:	2,	/* Xtalk operation size
+				 * 0: Double Word
+				 * 1: 32 Bytes.
+				 * 2: 128 Bytes,
+				 * 3: Reserved.
+				 */
+		srcnode: 9,	/* Source Node ID		*/
+		srcinit: 2,	/* Source Initiator:
+				 * See below for field values.
+				 */
+		useold:	1,	/* Use OLD command for processing */
+		imsgtype: 2,	/* Incoming message type
+				 * see below for field values
+				 */
+		imsg: 	8,	/* Incoming message 	*/
+		initator: 3,	/* Initiator of original request
+				 * See below for field values.
+				 */
+		reqtype: 5,	/* Identifies type of request
+				 * See below for field values.
+				 */
+		rsvd2:	7,
+		ackcnt:	11,	/* Invalidate ack count	*/
+		resp:	1,	/* data response  given to processor */
+		ack: 	1,	/* indicates data ack received 	*/
+		hold:	1,	/* entry is gathering inval acks */
+		wb_pend:1,	/* waiting for writeback to complete */
+		intvn: 	1,	/* Intervention */
+		stall_ib: 1,	/* Stall Ibuf (from crosstalk) */
+		stall_intr: 1;	/* Stall internal interrupts */
+	} icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+   runtime selection of the format based on the REV_ID field of the
+   NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+	u64	reg_value;
+	struct {
+		u64	rsvd1:	5,
+			btenum:	1,	/* BTE to which entry belongs to */
+			cohtrans: 1,	/* Coherent transaction	*/
+			xtsize:	2,	/* Xtalk operation size
+					 * 0: Double Word
+					 * 1: 32 Bytes.
+					 * 2: 128 Bytes,
+					 * 3: Reserved.
+					 */
+			srcnode: 9,	/* Source Node ID		*/
+			srcinit: 2,	/* Source Initiator:
+					 * See below for field values.
+					 */
+			useold:	1,	/* Use OLD command for processing */
+			imsgtype: 2,	/* Incoming message type
+					 * see below for field values
+					 */
+			imsg: 	8,	/* Incoming message 	*/
+			initator: 3,	/* Initiator of original request
+					 * See below for field values.
+					 */
+			rsvd2: 	1,
+			pcache: 1,	/* entry belongs to partial cache */
+			reqtype: 5,	/* Identifies type of request
+					 * See below for field values.
+					 */
+			stl_ib:	1,	/* stall Ibus coming from xtalk	*/
+			stl_intr: 1,	/* Stall internal interrupts */
+			stl_bte0: 1,	/* Stall BTE 0 	*/
+			stl_bte1: 1,	/* Stall BTE 1	*/
+			intrvn:	1,	/* Req was target of intervention */
+			ackcnt:	11,	/* Invalidate ack count	*/
+			resp:	1,	/* data response  given to processor */
+			ack: 	1,	/* indicates data ack received 	*/
+			hold:	1,	/* entry is gathering inval acks */
+			wb_pend:1,	/* waiting for writeback to complete */
+			sleep: 	1,	/* xtalk req sleeping till IO-sync */
+			pnd_reply: 1,	/* replies not issed due to IOQ full */
+			pnd_req: 1;	/* reqs not issued due to IOQ full */
+	} h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_btenum	icrbb_field_s.btenum
+#define	b_cohtrans	icrbb_field_s.cohtrans
+#define	b_xtsize	icrbb_field_s.xtsize
+#define	b_srcnode	icrbb_field_s.srcnode
+#define	b_srcinit	icrbb_field_s.srcinit
+#define	b_imsgtype	icrbb_field_s.imsgtype
+#define	b_imsg		icrbb_field_s.imsg
+#define	b_initiator	icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define	IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
+#define	IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
+#define	IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
+#define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
+#define	IIO_ICRB_GB_REQ		2	/* Source is Guranteed BW request */
+#define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
+
+/*
+ * Values for field imsgtype
+ */
+#define	IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk	*/
+#define	IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE 	*/
+#define	IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
+#define	IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define	IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
+#define	IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
+#define	IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
+#define	IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ? 	*/
+#define	IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define	IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
+#define	IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
+#define	IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
+#define	IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
+#define	IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
+#define	IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
+#define	IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate 	*/
+#define	IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
+#define	IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
+#define	IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write 	*/
+#define	IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
+#define	IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
+#define	IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
+#define	IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
+#define	IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+	u64	reg_value;
+	struct {
+		u64	rsvd:	6,
+			sleep:	1,
+			pricnt: 4,	/* Priority count sent with Read req */
+			pripsc: 4,	/* Priority Pre scalar 	*/
+			bteop:	1,	/* BTE Operation 	*/
+			push_be: 34,	/* Push address Byte enable
+					 * Holds push addr, if CRB is for BTE
+					 * If CRB belongs to Partial cache,
+					 * this contains byte enables bits
+					 * ([47:46] = 0)
+					 */
+			suppl:	11,	/* Supplemental field	*/
+			barrop: 1,	/* Barrier Op bit set in xtalk req */
+			doresp: 1,	/* Xtalk req needs a response 	*/
+			gbr:	1;	/* GBR bit set in xtalk packet 	*/
+	} icrbc_field_s;
+} icrbc_t;
+
+#define	c_pricnt	icrbc_field_s.pricnt
+#define	c_pripsc	icrbc_field_s.pripsc
+#define	c_bteop		icrbc_field_s.bteop
+#define	c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_benable 	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define	c_suppl		icrbc_field_s.suppl
+#define	c_barrop	icrbc_field_s.barrop
+#define	c_doresp	icrbc_field_s.doresp
+#define	c_gbr	icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+	u64	reg_value;
+	struct {
+	    u64	rsvd:	38,
+		toutvld: 1,	/* Timeout in progress for this CRB */
+		ctxtvld: 1,	/* Context field below is valid	*/
+		rsvd2:	1,
+		context: 15, 	/* Bit vector:
+				 * Has a bit set for each CRB entry
+				 * which needs to be deallocated
+				 * before this CRB entry is processed.
+				 * Set only for barrier operations.
+				 */
+		timeout: 8;	/* Timeout Upper 8 bits	*/
+	} icrbd_field_s;
+} icrbd_t;
+
+#define	icrbd_toutvld	icrbd_field_s.toutvld
+#define	icrbd_ctxtvld	icrbd_field_s.ctxtvld
+#define	icrbd_context	icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+	u64	hi_ifdr_value;
+	struct {
+		u64	ifdr_rsvd:	49,
+	                ifdr_maxrp:	 7,
+	                ifdr_rsvd1:	 1,
+			ifdr_maxrq:	 7;
+	} hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0	0x410000	/* BTE length/status 0 */
+#define IIO_IBSA_0	0x410008	/* BTE source address 0 */
+#define IIO_IBDA_0	0x410010	/* BTE destination address 0 */
+#define IIO_IBCT_0	0x410018	/* BTE control/terminate 0 */
+#define IIO_IBNA_0	0x410020	/* BTE notification address 0 */
+#define IIO_IBNR_0	IIO_IBNA_0
+#define IIO_IBIA_0	0x410028	/* BTE interrupt address 0 */
+
+#define IIO_IBLS_1	0x420000	/* BTE length/status 1 */
+#define IIO_IBSA_1	0x420008	/* BTE source address 1 */
+#define IIO_IBDA_1	0x420010	/* BTE destination address 1 */
+#define IIO_IBCT_1	0x420018	/* BTE control/terminate 1 */
+#define IIO_IBNA_1	0x420020	/* BTE notification address 1 */
+#define IIO_IBNR_1	IIO_IBNA_1
+#define IIO_IBIA_1	0x420028	/* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR	0x430000	/* Performance Control */
+#define IIO_IPPR	0x430008	/* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1		(1 << 18)  /* clear bte error 1 ??? */
+#define IECLR_BTE0		(1 << 17)  /* clear bte error 0 ??? */
+#define IECLR_CRAZY		(1 << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1 << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1 << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1 << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1 << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1 << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1 << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1 << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1 << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1 << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+	u64	entry;
+	struct {
+	    u64	rsvd1     : 7,  /* Reserved field 		*/
+		valid     : 1,	/* Maps to a timeout entry	*/
+		rsvd2     : 1,
+		srcnode   : 9,	/* Node which did this PIO	*/
+		initiator : 2,	/* If T5A or T5B or IO 		*/
+		rsvd3     : 3,
+		addr      : 38,	/* Physical address of PIO	*/
+		rsvd4     : 3;
+	} iprte_fields;
+} iprte_a_t;
+
+#define	iprte_valid	iprte_fields.valid
+#define	iprte_timeout	iprte_fields.timeout
+#define	iprte_srcnode	iprte_fields.srcnode
+#define	iprte_init	iprte_fields.initiator
+#define	iprte_addr	iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define	IPRTE_ADDRSHFT	3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+	u64	reg_value;
+	struct {
+	    u64	rsvd1:	15,
+		error:	1,	/* Widget rcvd wr resp pkt w/ error */
+		ovflow:	5,	/* Over flow count. perf measurement */
+		fire_and_forget: 1, /* Launch Write without response */
+		mode:	2,	/* Widget operation Mode	*/
+		rsvd2:	2,
+		bnakctr: 14,
+		rsvd3: 	2,
+		anakctr: 14,
+		xtalkctr: 8;
+	} iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval	reg_value
+
+#define	iprb_error	iprb_fields_s.error
+#define	iprb_ovflow	iprb_fields_s.ovflow
+#define	iprb_ff		iprb_fields_s.fire_and_forget
+#define	iprb_mode	iprb_fields_s.mode
+#define	iprb_bnakctr	iprb_fields_s.bnakctr
+#define	iprb_anakctr	iprb_fields_s.anakctr
+#define	iprb_xtalkctr	iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define	IPRB_MODE_NORMAL	(0)
+#define	IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
+#define	IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
+#define	IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+	u64   ip_reg;	    /* the entire register value	*/
+	struct {
+	     u64 error:	1,  /*    63, error occurred		*/
+		ln_uce:	1,  /*    62: uncorrectable memory 	*/
+		ln_ae:	1,  /*    61: protection violation 	*/
+		ln_werr:1,  /*    60: write access error 	*/
+		ln_aerr:1,  /*    59: sn0net: Address error	*/
+		ln_perr:1,  /*    58: sn0net: poison error	*/
+		timeout:1,  /*    57: CRB timed out		*/
+		l_bdpkt:1,  /*    56: truncated pkt on sn0net	*/
+		c_bdpkt:1,  /*    55: truncated pkt on xtalk	*/
+		c_err:	1,  /*    54: incoming xtalk req, err set*/
+		rsvd1: 12,  /* 53-42: reserved			*/
+		valid:	1,  /*    41: Valid status		*/
+		sidn:	4,  /* 40-37: SIDN field of xtalk rqst	*/
+		tnum:	5,  /* 36-32: TNUM of xtalk request	*/
+		bo:	1,  /*    31: barrier op set in xtalk rqst*/
+		resprqd:1,  /*    30: xtalk rqst requires response*/
+		gbr:	1,  /*    29: gbr bit set in xtalk rqst	*/
+		size:	2,  /* 28-27: size of xtalk request	*/
+		excl:	4,  /* 26-23: exclusive bit(s)		*/
+		stall:	3,  /* 22-20: stall (xtalk, bte 0/1)	*/
+		intvn:	1,  /*    19: rqst target of intervention*/
+		resp:	1,  /*    18: Data response given to t5	*/
+		ack:	1,  /*    17: Data ack received.	*/
+		hold:	1,  /*    16: crb gathering invalidate acks*/
+		wb:	1,  /*    15: writeback pending.	*/
+		ack_cnt:11, /* 14-04: counter of invalidate acks*/
+		tscaler:4;  /* 03-00: Timeout prescaler		*/
+	} ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT	54
+#define ICRBP_A_ERR_MASK	0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+	u64 iin_reg;
+	struct {
+		u64 rsvd1 : 35,
+	            isent : 1,
+	            rsvd2 : 3,
+	            ienable: 1,
+	            rsvd  : 7,
+	            node  : 9,
+	            rsvd4 : 1,
+	            level : 7;
+	} iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1 << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1 << 8)
+#define IBCT_NOTIFY		(0x1 << 4)
+#define IBCT_ZFIL_MODE		(0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT		16
+#define IBIA_LEVEL_MASK		(0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT	0
+#define IBIA_NODE_ID_MASK	(0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET		9
+#define HUB_WIDGET_ID_MIN	0x8
+#define HUB_WIDGET_ID_MAX	0xf
+
+#define HUB_WIDGET_PART_NUM	0xc101
+#define MAX_HUBS_PER_XBOW	2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid)	(REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK	(UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define	      HUBII_XBOW_REV2_CREDIT  4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
new file mode 100644
index 0000000..14c225d
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -0,0 +1,789 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBMD_H
+#define	_ASM_SN_SN0_HUBMD_H
+
+
+/*
+ * Hub Memory/Directory interface registers
+ */
+#define CACHE_SLINE_SIZE        128	/* Secondary cache line size on SN0 */
+
+#define	MAX_REGIONS		64
+
+/* Hardware page size and shift */
+
+#define MD_PAGE_SIZE		4096	 /* Page size in bytes		    */
+#define MD_PAGE_NUM_SHFT	12	 /* Address to page number shift    */
+
+/* Register offsets from LOCAL_HUB or REMOTE_HUB */
+
+#define MD_BASE			0x200000
+#define MD_BASE_PERF		0x210000
+#define MD_BASE_JUNK		0x220000
+
+#define MD_IO_PROTECT		0x200000 /* MD and core register protection */
+#define MD_IO_PROT_OVRRD	0x200008 /* Clear my bit in MD_IO_PROTECT   */
+#define MD_HSPEC_PROTECT	0x200010 /* BDDIR, LBOOT, RBOOT protection  */
+#define MD_MEMORY_CONFIG	0x200018 /* Memory/Directory DIMM control   */
+#define	MD_REFRESH_CONTROL	0x200020 /* Memory/Directory refresh ctrl   */
+#define	MD_FANDOP_CAC_STAT	0x200028 /* Fetch-and-op cache status 	    */
+#define	MD_MIG_DIFF_THRESH	0x200030 /* Page migr. count diff thresh.   */
+#define	MD_MIG_VALUE_THRESH	0x200038 /* Page migr. count abs. thresh.   */
+#define	MD_MIG_CANDIDATE	0x200040 /* Latest page migration candidate */
+#define	MD_MIG_CANDIDATE_CLR	0x200048 /* Clear page migration candidate  */
+#define MD_DIR_ERROR		0x200050 /* Directory DIMM error 	    */
+#define MD_DIR_ERROR_CLR	0x200058 /* Directory DIMM error clear 	    */
+#define MD_PROTOCOL_ERROR	0x200060 /* Directory protocol error 	    */
+#define MD_PROTOCOL_ERROR_CLR	0x200068 /* Directory protocol error clear  */
+#define MD_MEM_ERROR		0x200070 /* Memory DIMM error 		    */
+#define MD_MEM_ERROR_CLR	0x200078 /* Memory DIMM error clear 	    */
+#define MD_MISC_ERROR		0x200080 /* Miscellaneous MD error 	    */
+#define MD_MISC_ERROR_CLR	0x200088 /* Miscellaneous MD error clear    */
+#define MD_MEM_DIMM_INIT	0x200090 /* Memory DIMM mode initization.   */
+#define MD_DIR_DIMM_INIT	0x200098 /* Directory DIMM mode init. 	    */
+#define MD_MOQ_SIZE		0x2000a0 /* MD outgoing queue size 	    */
+#define MD_MLAN_CTL		0x2000a8 /* NIC (Microlan) control register */
+
+#define MD_PERF_SEL		0x210000 /* Select perf monitor events 	    */
+#define MD_PERF_CNT0		0x210010 /* Performance counter 0 	    */
+#define MD_PERF_CNT1		0x210018 /* Performance counter 1 	    */
+#define MD_PERF_CNT2		0x210020 /* Performance counter 2 	    */
+#define MD_PERF_CNT3		0x210028 /* Performance counter 3 	    */
+#define MD_PERF_CNT4		0x210030 /* Performance counter 4 	    */
+#define MD_PERF_CNT5		0x210038 /* Performance counter 5 	    */
+
+#define MD_UREG0_0		0x220000 /* uController/UART 0 register     */
+#define MD_UREG0_1		0x220008 /* uController/UART 0 register     */
+#define MD_UREG0_2		0x220010 /* uController/UART 0 register     */
+#define MD_UREG0_3		0x220018 /* uController/UART 0 register     */
+#define MD_UREG0_4		0x220020 /* uController/UART 0 register     */
+#define MD_UREG0_5		0x220028 /* uController/UART 0 register     */
+#define MD_UREG0_6		0x220030 /* uController/UART 0 register     */
+#define MD_UREG0_7		0x220038 /* uController/UART 0 register     */
+
+#define MD_SLOTID_USTAT		0x220048 /* Hub slot ID & UART/uCtlr status */
+#define MD_LED0			0x220050 /* Eight-bit LED for CPU A 	    */
+#define MD_LED1			0x220058 /* Eight-bit LED for CPU B 	    */
+
+#define MD_UREG1_0		0x220080 /* uController/UART 1 register     */
+#define MD_UREG1_1		0x220088 /* uController/UART 1 register     */
+#define MD_UREG1_2		0x220090 /* uController/UART 1 register     */
+#define MD_UREG1_3		0x220098 /* uController/UART 1 register     */
+#define MD_UREG1_4		0x2200a0 /* uController/UART 1 register     */
+#define MD_UREG1_5		0x2200a8 /* uController/UART 1 register     */
+#define MD_UREG1_6		0x2200b0 /* uController/UART 1 register     */
+#define MD_UREG1_7		0x2200b8 /* uController/UART 1 register     */
+#define MD_UREG1_8		0x2200c0 /* uController/UART 1 register     */
+#define MD_UREG1_9		0x2200c8 /* uController/UART 1 register     */
+#define MD_UREG1_10		0x2200d0 /* uController/UART 1 register     */
+#define MD_UREG1_11		0x2200d8 /* uController/UART 1 register     */
+#define MD_UREG1_12		0x2200e0 /* uController/UART 1 register     */
+#define MD_UREG1_13		0x2200e8 /* uController/UART 1 register     */
+#define MD_UREG1_14		0x2200f0 /* uController/UART 1 register     */
+#define MD_UREG1_15		0x2200f8 /* uController/UART 1 register     */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MD_MEM_BANKS		4	 /* 4 banks of memory max in N mode */
+#else
+#define MD_MEM_BANKS		8	 /* 8 banks of memory max in M mode */
+#endif
+
+/*
+ * MD_MEMORY_CONFIG fields
+ *
+ *   MD_SIZE_xxx are useful for representing the size of a SIMM or bank
+ *   (SIMM pair).  They correspond to the values needed for the bit
+ *   triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size.
+ *   Bits not used by the MD are used by software.
+ */
+
+#define MD_SIZE_EMPTY		0	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_8MB		1
+#define MD_SIZE_16MB		2
+#define MD_SIZE_32MB		3	/* Broken in Hub 1		    */
+#define MD_SIZE_64MB		4	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_128MB		5	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_256MB		6
+#define MD_SIZE_512MB		7	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_1GB		8
+#define MD_SIZE_2GB		9
+#define MD_SIZE_4GB		10
+
+#define MD_SIZE_BYTES(size)	((size) == 0 ? 0 : 0x400000L << (size))
+#define MD_SIZE_MBYTES(size)	((size) == 0 ? 0 :   4	     << (size))
+
+#define MMC_FPROM_CYC_SHFT	49	/* Have to use UINT64_CAST, instead */
+#define MMC_FPROM_CYC_MASK	(UINT64_CAST 31 << 49)	/* of 'L' suffix,   */
+#define MMC_FPROM_WR_SHFT	44			/* for assembler    */
+#define MMC_FPROM_WR_MASK	(UINT64_CAST 31 << 44)
+#define MMC_UCTLR_CYC_SHFT	39
+#define MMC_UCTLR_CYC_MASK	(UINT64_CAST 31 << 39)
+#define MMC_UCTLR_WR_SHFT	34
+#define MMC_UCTLR_WR_MASK	(UINT64_CAST 31 << 34)
+#define MMC_DIMM0_SEL_SHFT	32
+#define MMC_DIMM0_SEL_MASK	(UINT64_CAST 3 << 32)
+#define MMC_IO_PROT_EN_SHFT	31
+#define MMC_IO_PROT_EN_MASK	(UINT64_CAST 1 << 31)
+#define MMC_IO_PROT		(UINT64_CAST 1 << 31)
+#define MMC_ARB_MLSS_SHFT	30
+#define MMC_ARB_MLSS_MASK	(UINT64_CAST 1 << 30)
+#define MMC_ARB_MLSS		(UINT64_CAST 1 << 30)
+#define MMC_IGNORE_ECC_SHFT	29
+#define MMC_IGNORE_ECC_MASK	(UINT64_CAST 1 << 29)
+#define MMC_IGNORE_ECC		(UINT64_CAST 1 << 29)
+#define MMC_DIR_PREMIUM_SHFT	28
+#define MMC_DIR_PREMIUM_MASK	(UINT64_CAST 1 << 28)
+#define MMC_DIR_PREMIUM		(UINT64_CAST 1 << 28)
+#define MMC_REPLY_GUAR_SHFT	24
+#define MMC_REPLY_GUAR_MASK	(UINT64_CAST 15 << 24)
+#define MMC_BANK_SHFT(_b)	((_b) * 3)
+#define MMC_BANK_MASK(_b)	(UINT64_CAST 7 << MMC_BANK_SHFT(_b))
+#define MMC_BANK_ALL_MASK	0xffffff
+#define MMC_RESET_DEFAULTS	(UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \
+				 UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \
+				 UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \
+				 UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \
+				 MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \
+				 UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \
+				 MMC_BANK_ALL_MASK)
+
+/* MD_REFRESH_CONTROL fields */
+
+#define MRC_ENABLE_SHFT		63
+#define MRC_ENABLE_MASK		(UINT64_CAST 1 << 63)
+#define MRC_ENABLE		(UINT64_CAST 1 << 63)
+#define MRC_COUNTER_SHFT	12
+#define MRC_COUNTER_MASK	(UINT64_CAST 0xfff << 12)
+#define MRC_CNT_THRESH_MASK	0xfff
+#define MRC_RESET_DEFAULTS	(UINT64_CAST 0x400)
+
+/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */
+
+#define MDI_SELECT_SHFT		32
+#define MDI_SELECT_MASK		(UINT64_CAST 0x0f << 32)
+#define MDI_DIMM_MODE_MASK	(UINT64_CAST 0xfff)
+
+/* MD_MOQ_SIZE fields */
+
+#define MMS_RP_SIZE_SHFT	8
+#define MMS_RP_SIZE_MASK	(UINT64_CAST 0x3f << 8)
+#define MMS_RQ_SIZE_SHFT	0
+#define MMS_RQ_SIZE_MASK	(UINT64_CAST 0x1f)
+#define MMS_RESET_DEFAULTS	(0x32 << 8 | 0x12)
+
+/* MD_FANDOP_CAC_STAT fields */
+
+#define MFC_VALID_SHFT		63
+#define MFC_VALID_MASK		(UINT64_CAST 1 << 63)
+#define MFC_VALID		(UINT64_CAST 1 << 63)
+#define MFC_ADDR_SHFT		6
+#define MFC_ADDR_MASK		(UINT64_CAST 0x3ffffff)
+
+/* MD_MLAN_CTL fields */
+
+#define MLAN_PHI1_SHFT		27
+#define MLAN_PHI1_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PHI0_SHFT		20
+#define MLAN_PHI0_MASK		(UINT64_CAST 0x7f << 27)
+#define MLAN_PULSE_SHFT		10
+#define MLAN_PULSE_MASK		(UINT64_CAST 0x3ff << 10)
+#define MLAN_SAMPLE_SHFT	2
+#define MLAN_SAMPLE_MASK	(UINT64_CAST 0xff << 2)
+#define MLAN_DONE_SHFT		1
+#define MLAN_DONE_MASK		2
+#define MLAN_DONE		(UINT64_CAST 0x02)
+#define MLAN_RD_DATA		(UINT64_CAST 0x01)
+#define MLAN_RESET_DEFAULTS	(UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \
+				 UINT64_CAST 0x31 << MLAN_PHI0_SHFT)
+
+/* MD_SLOTID_USTAT bit definitions */
+
+#define MSU_CORECLK_TST_SHFT	7	/* You don't wanna know             */
+#define MSU_CORECLK_TST_MASK	(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_TST		(UINT64_CAST 1 << 7)
+#define MSU_CORECLK_SHFT	6	/* You don't wanna know             */
+#define MSU_CORECLK_MASK	(UINT64_CAST 1 << 6)
+#define MSU_CORECLK		(UINT64_CAST 1 << 6)
+#define MSU_NETSYNC_SHFT	5	/* You don't wanna know             */
+#define MSU_NETSYNC_MASK	(UINT64_CAST 1 << 5)
+#define MSU_NETSYNC		(UINT64_CAST 1 << 5)
+#define MSU_FPROMRDY_SHFT	4	/* Flash PROM ready bit 	    */
+#define MSU_FPROMRDY_MASK	(UINT64_CAST 1 << 4)
+#define MSU_FPROMRDY		(UINT64_CAST 1 << 4)
+#define MSU_I2CINTR_SHFT		3	/* I2C interrupt bit   */
+#define MSU_I2CINTR_MASK		(UINT64_CAST 1 << 3)
+#define MSU_I2CINTR		(UINT64_CAST 1 << 3)
+#define MSU_SLOTID_MASK		0xff
+#define MSU_SN0_SLOTID_SHFT	0	/* Slot ID			    */
+#define MSU_SN0_SLOTID_MASK	(UINT64_CAST 7)
+#define MSU_SN00_SLOTID_SHFT	7
+#define MSU_SN00_SLOTID_MASK	(UINT64_CAST 0x80)
+
+#define	MSU_PIMM_PSC_SHFT	4
+#define	MSU_PIMM_PSC_MASK	(0xf << MSU_PIMM_PSC_SHFT)
+
+/* MD_MIG_DIFF_THRESH bit definitions */
+
+#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_DIFF_THRES_VALID_SHFT 63
+#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_VALUE_THRESH bit definitions */
+
+#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_VALUE_THRES_VALID_SHFT 63
+#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_CANDIDATE bit definitions */
+
+#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_CANDIDATE_VALID_SHFT 63
+#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30)
+#define MD_MIG_CANDIDATE_TYPE_SHFT 30
+#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29)
+#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29
+#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18)
+#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18
+#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20)
+#define MD_MIG_CANDIDATE_NODEID_SHFT 20
+#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff)
+#define MD_MIG_CANDIDATE_ADDR_SHFT 14  /* The address starts at bit 14 */
+
+/* Other MD definitions */
+
+#define MD_BANK_SHFT		29			/* log2(512 MB)     */
+#define MD_BANK_MASK		(UINT64_CAST 7 << 29)
+#define MD_BANK_SIZE		(UINT64_CAST 1 << MD_BANK_SHFT)	  /* 512 MB */
+#define MD_BANK_OFFSET(_b)	(UINT64_CAST (_b) << MD_BANK_SHFT)
+
+/*
+ * The following definitions cover the bit field definitions for the
+ * various MD registers.  For multi-bit registers, we define both
+ * a shift amount and a mask value.  By convention, if you want to
+ * isolate a field, you should mask the field and then shift it down,
+ * since this makes the masks useful without a shift.
+ */
+
+/* Directory entry states for both premium and standard SIMMs. */
+
+#define MD_DIR_SHARED		(UINT64_CAST 0x0)	/* 000 */
+#define MD_DIR_POISONED		(UINT64_CAST 0x1)	/* 001 */
+#define MD_DIR_EXCLUSIVE	(UINT64_CAST 0x2)	/* 010 */
+#define MD_DIR_BUSY_SHARED	(UINT64_CAST 0x3)	/* 011 */
+#define MD_DIR_BUSY_EXCL	(UINT64_CAST 0x4)	/* 100 */
+#define MD_DIR_WAIT		(UINT64_CAST 0x5)	/* 101 */
+#define MD_DIR_UNOWNED		(UINT64_CAST 0x7)	/* 111 */
+
+/*
+ * The MD_DIR_FORCE_ECC bit can be added directory entry write data
+ * to forcing the ECC to be written as-is instead of recalculated.
+ */
+
+#define MD_DIR_FORCE_ECC	(UINT64_CAST 1 << 63)
+
+/*
+ * Premium SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A, B, and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE = shared, FINE = 1
+ * Format B:  STATE = shared, FINE = 0
+ * Format C:  STATE != shared (FINE must be 0)
+ */
+
+#define MD_PDIR_MASK		0xffffffffffff		/* Whole entry 	    */
+#define MD_PDIR_ECC_SHFT	0			/* ABC low or high  */
+#define MD_PDIR_ECC_MASK	0x7f
+#define MD_PDIR_PRIO_SHFT	8			/* ABC low 	    */
+#define MD_PDIR_PRIO_MASK	(0xf << 8)
+#define MD_PDIR_AX_SHFT		7			/* ABC low 	    */
+#define MD_PDIR_AX_MASK		(1 << 7)
+#define MD_PDIR_AX		(1 << 7)
+#define MD_PDIR_FINE_SHFT	12			/* ABC low 	    */
+#define MD_PDIR_FINE_MASK	(1 << 12)
+#define MD_PDIR_FINE		(1 << 12)
+#define MD_PDIR_OCT_SHFT	13			/* A low 	    */
+#define MD_PDIR_OCT_MASK	(7 << 13)
+#define MD_PDIR_STATE_SHFT	13			/* BC low 	    */
+#define MD_PDIR_STATE_MASK	(7 << 13)
+#define MD_PDIR_ONECNT_SHFT	16			/* BC low 	    */
+#define MD_PDIR_ONECNT_MASK	(0x3f << 16)
+#define MD_PDIR_PTR_SHFT	22			/* C low 	    */
+#define MD_PDIR_PTR_MASK	(UINT64_CAST 0x7ff << 22)
+#define MD_PDIR_VECMSB_SHFT	22			/* AB low 	    */
+#define MD_PDIR_VECMSB_BITMASK	0x3ffffff
+#define MD_PDIR_VECMSB_BITSHFT	27
+#define MD_PDIR_VECMSB_MASK	(UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
+#define MD_PDIR_CWOFF_SHFT	7			/* C high 	    */
+#define MD_PDIR_CWOFF_MASK	(7 << 7)
+#define MD_PDIR_VECLSB_SHFT	10			/* AB high 	    */
+#define MD_PDIR_VECLSB_BITMASK	(UINT64_CAST 0x3fffffffff)
+#define MD_PDIR_VECLSB_BITSHFT	0
+#define MD_PDIR_VECLSB_MASK	(MD_PDIR_VECLSB_BITMASK << 10)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_PDIR_INIT_LO		(MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \
+				 MD_PDIR_AX)
+#define MD_PDIR_INIT_HI		0
+#define MD_PDIR_INIT_PROT	(MD_PROT_RW << MD_PPROT_IO_SHFT | \
+				 MD_PROT_RW << MD_PPROT_SHFT)
+
+/*
+ * Standard SIMM directory entry shifts and masks.  Each is valid only in the
+ * context(s) indicated, where A and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A:  STATE == shared
+ * Format C:  STATE != shared
+ */
+
+#define MD_SDIR_MASK		0xffff			/* Whole entry 	    */
+#define MD_SDIR_ECC_SHFT	0			/* AC low or high   */
+#define MD_SDIR_ECC_MASK	0x1f
+#define MD_SDIR_PRIO_SHFT	6			/* AC low 	    */
+#define MD_SDIR_PRIO_MASK	(1 << 6)
+#define MD_SDIR_AX_SHFT		5			/* AC low 	    */
+#define MD_SDIR_AX_MASK		(1 << 5)
+#define MD_SDIR_AX		(1 << 5)
+#define MD_SDIR_STATE_SHFT	7			/* AC low 	    */
+#define MD_SDIR_STATE_MASK	(7 << 7)
+#define MD_SDIR_PTR_SHFT	10			/* C low 	    */
+#define MD_SDIR_PTR_MASK	(0x3f << 10)
+#define MD_SDIR_CWOFF_SHFT	5			/* C high 	    */
+#define MD_SDIR_CWOFF_MASK	(7 << 5)
+#define MD_SDIR_VECMSB_SHFT	11			/* A low 	    */
+#define MD_SDIR_VECMSB_BITMASK	0x1f
+#define MD_SDIR_VECMSB_BITSHFT	7
+#define MD_SDIR_VECMSB_MASK	(MD_SDIR_VECMSB_BITMASK << 11)
+#define MD_SDIR_VECLSB_SHFT	5			/* A high 	    */
+#define MD_SDIR_VECLSB_BITMASK	0x7ff
+#define MD_SDIR_VECLSB_BITSHFT	0
+#define MD_SDIR_VECLSB_MASK	(MD_SDIR_VECLSB_BITMASK << 5)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_SDIR_INIT_LO		(MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \
+				 MD_SDIR_AX)
+#define MD_SDIR_INIT_HI		0
+#define MD_SDIR_INIT_PROT	(MD_PROT_RW << MD_SPROT_SHFT)
+
+/* Protection and migration field values */
+
+#define MD_PROT_RW		(UINT64_CAST 0x6)
+#define MD_PROT_RO		(UINT64_CAST 0x3)
+#define MD_PROT_NO		(UINT64_CAST 0x0)
+#define MD_PROT_BAD		(UINT64_CAST 0x5)
+
+/* Premium SIMM protection entry shifts and masks. */
+
+#define MD_PPROT_SHFT		0			/* Prot. field 	    */
+#define MD_PPROT_MASK		7
+#define MD_PPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_PPROT_MIGMD_MASK	(3 << 3)
+#define MD_PPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_PPROT_REFCNT_WIDTH	0x7ffff
+#define MD_PPROT_REFCNT_MASK	(MD_PPROT_REFCNT_WIDTH << 5)
+
+#define MD_PPROT_IO_SHFT	45			/* I/O Prot field   */
+#define MD_PPROT_IO_MASK	(UINT64_CAST 7 << 45)
+
+/* Standard SIMM protection entry shifts and masks. */
+
+#define MD_SPROT_SHFT		0			/* Prot. field 	    */
+#define MD_SPROT_MASK		7
+#define MD_SPROT_MIGMD_SHFT	3			/* Migration mode   */
+#define MD_SPROT_MIGMD_MASK	(3 << 3)
+#define MD_SPROT_REFCNT_SHFT	5			/* Reference count  */
+#define MD_SPROT_REFCNT_WIDTH	0x7ff
+#define MD_SPROT_REFCNT_MASK	(MD_SPROT_REFCNT_WIDTH << 5)
+
+/* Migration modes used in protection entries */
+
+#define MD_PROT_MIGMD_IREL	(UINT64_CAST 0x3 << 3)
+#define MD_PROT_MIGMD_IABS	(UINT64_CAST 0x2 << 3)
+#define MD_PROT_MIGMD_PREL	(UINT64_CAST 0x1 << 3)
+#define MD_PROT_MIGMD_OFF	(UINT64_CAST 0x0 << 3)
+
+
+/*
+ * Operations on page migration threshold register
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * LED register macros
+ */
+
+#define CPU_LED_ADDR(_nasid, _slice)					   \
+	(private.p_sn00 ?						   \
+	 REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 +	((_slice) << 5)) :	   \
+	 REMOTE_HUB_ADDR((_nasid), MD_LED0    + ((_slice) << 3)))
+
+#define SET_CPU_LEDS(_nasid, _slice,  _val)				   \
+	(HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
+
+#define SET_MY_LEDS(_v) 						   \
+	SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
+
+/*
+ * Operations on Memory/Directory DIMM control register
+ */
+
+#define DIRTYPE_PREMIUM 1
+#define DIRTYPE_STANDARD 0
+#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\
+	(REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \
+	MMC_DIR_PREMIUM_SHFT)
+
+
+/*
+ * Operations on page migration count difference and absolute threshold
+ * registers
+ */
+
+#define MD_MIG_DIFF_THRESH_GET(region) ( \
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+	MD_MIG_DIFF_THRES_VALUE_MASK)
+
+#define MD_MIG_DIFF_THRESH_SET(region, value) (				\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		MD_MIG_DIFF_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_DIFF_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     & ~MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH)		\
+			     | MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) &			\
+	       MD_MIG_DIFF_THRES_VALID_MASK)
+
+#define MD_MIG_VALUE_THRESH_GET(region) (				\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &  \
+	MD_MIG_VALUE_THRES_VALUE_MASK)
+
+#define MD_MIG_VALUE_THRESH_SET(region, value) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		MD_MIG_VALUE_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_VALUE_THRESH_DISABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH)		\
+			     & ~MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_ENABLE(region) (			\
+	REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH,			\
+		REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH)		\
+			     | MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) (			\
+	REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) &			 \
+	       MD_MIG_VALUE_THRES_VALID_MASK)
+
+/*
+ * Operations on page migration candidate register
+ */
+
+#define MD_MIG_CANDIDATE_GET(my_region_id) ( \
+	REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR))
+
+#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK)
+
+#define MD_MIG_CANDIDATE_NODEID(value) ( \
+	((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT)
+
+#define MD_MIG_CANDIDATE_TYPE(value) ( \
+	((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT)
+
+#define MD_MIG_CANDIDATE_VALID(value) ( \
+	((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT)
+
+/*
+ * Macros to retrieve fields in the protection entry
+ */
+
+/* for Premium SIMM */
+#define MD_PPROT_REFCNT_GET(value) ( \
+	((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT)
+
+#define MD_PPROT_MIGMD_GET(value) ( \
+	((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT)
+
+/* for Standard SIMM */
+#define MD_SPROT_REFCNT_GET(value) ( \
+	((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT)
+
+#define MD_SPROT_MIGMD_GET(value) ( \
+	((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT)
+
+/*
+ * Format of dir_error, mem_error, protocol_error and misc_error registers
+ */
+
+struct dir_error_reg {
+	u64	uce_vld:   1,	/*    63: valid directory uce 	*/
+		ae_vld:	   1,	/*    62: valid dir prot ecc error */
+		ce_vld:	   1,	/*    61: valid correctable ECC err*/
+		rsvd1:	  19,	/* 60-42: reserved		*/
+		bad_prot:  3,	/* 41-39: encoding, bad access rights*/
+		bad_syn:   7,	/* 38-32: bad dir syndrome	*/
+		rsvd2:	   2,	/* 31-30: reserved		*/
+		hspec_addr:27,	/* 29-03: bddir space bad entry */
+		uce_ovr:   1,	/*     2: multiple dir uce's	*/
+		ae_ovr:	   1,	/*     1: multiple prot ecc errs*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+typedef union md_dir_error {
+	u64	derr_reg;	/* the entire register 		*/
+	struct dir_error_reg derr_fmt;	/* the register format		*/
+} md_dir_error_t;
+
+
+struct mem_error_reg {
+	u64	uce_vld:   1,	/*    63: valid memory uce 	*/
+		ce_vld:	   1,	/*    62: valid correctable ECC err*/
+		rsvd1:	  22,	/* 61-40: reserved		*/
+		bad_syn:   8,	/* 39-32: bad mem ecc syndrome	*/
+		address:  29,	/* 31-03: bad entry pointer	*/
+		rsvd2:	   1,	/*     2: reserved		*/
+		uce_ovr:   1,	/*     1: multiple mem uce's	*/
+		ce_ovr:	   1;	/*     0: multiple correctable errs */
+};
+
+
+typedef union md_mem_error {
+	u64	merr_reg;	/* the entire register 		*/
+	struct mem_error_reg  merr_fmt; /* format of the mem_error reg  */
+} md_mem_error_t;
+
+
+struct proto_error_reg {
+	u64	valid:	   1,	/*    63: valid protocol error	*/
+		rsvd1:	   2,	/* 62-61: reserved		*/
+		initiator:11,	/* 60-50: id of request initiator*/
+		backoff:   2,	/* 49-48: backoff control	*/
+		msg_type:  8,	/* 47-40: type of request	*/
+		access:	   2,	/* 39-38: access rights of initiator*/
+		priority:  1,	/*    37: priority level of requestor*/
+		dir_state: 4,	/* 36-33: state of directory	*/
+		pointer_me:1,	/*    32: initiator same as dir ptr */
+		address:  29,	/* 31-03: request address	*/
+		rsvd2:	   2,	/* 02-01: reserved		*/
+		overrun:   1;	/*     0: multiple protocol errs */
+};
+
+typedef union md_proto_error {
+	u64	perr_reg;	/* the entire register 		*/
+	struct proto_error_reg	perr_fmt; /* format of the register	*/
+} md_proto_error_t;
+
+
+struct md_sdir_high_fmt {
+	unsigned short sd_hi_bvec : 11,
+		       sd_hi_ecc  : 5;
+};
+
+
+typedef union md_sdir_high {
+	/* The 16 bits of standard directory, upper word */
+	unsigned short sd_hi_val;
+	struct	md_sdir_high_fmt sd_hi_fmt;
+}md_sdir_high_t;
+
+
+struct md_sdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	unsigned short	sds_lo_bvec  : 5,
+			sds_lo_unused: 1,
+			sds_lo_state : 3,
+			sds_lo_prio  : 1,
+			sds_lo_ax    : 1,
+			sds_lo_ecc   : 5;
+};
+
+struct md_sdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	unsigned short	sde_lo_ptr   : 6,
+			sde_lo_state : 3,
+			sde_lo_prio  : 1,
+			sde_lo_ax    : 1,
+			sde_lo_ecc   : 5;
+};
+
+
+typedef union md_sdir_low {
+	/* The 16 bits of standard directory, lower word */
+	unsigned short	sd_lo_val;
+	struct	md_sdir_low_exclusive_fmt sde_lo_fmt;
+	struct	md_sdir_low_shared_fmt sds_lo_fmt;
+}md_sdir_low_t;
+
+
+
+struct md_pdir_high_fmt {
+	u64	pd_hi_unused   : 16,
+		pd_hi_bvec     : 38,
+		pd_hi_unused1  : 3,
+		pd_hi_ecc      : 7;
+};
+
+
+typedef union md_pdir_high {
+	/* The 48 bits of standard directory, upper word */
+	u64	pd_hi_val;
+	struct md_pdir_high_fmt pd_hi_fmt;
+}md_pdir_high_t;
+
+
+struct md_pdir_low_shared_fmt {
+	/* The meaning of lower directory, shared */
+	u64	pds_lo_unused	: 16,
+		pds_lo_bvec	: 26,
+		pds_lo_cnt	:  6,
+		pds_lo_state	:  3,
+		pds_lo_ste	:  1,
+		pds_lo_prio	:  4,
+		pds_lo_ax	:  1,
+		pds_lo_ecc	:  7;
+};
+
+struct md_pdir_low_exclusive_fmt {
+	/* The meaning of lower directory, exclusive */
+	u64	pde_lo_unused	: 31,
+		pde_lo_ptr	: 11,
+		pde_lo_unused1	:  6,
+		pde_lo_state	:  3,
+		pde_lo_ste	:  1,
+		pde_lo_prio	:  4,
+		pde_lo_ax	:  1,
+		pde_lo_ecc	:  7;
+};
+
+
+typedef union md_pdir_loent {
+	/* The 48 bits of premium directory, lower word */
+	u64	pd_lo_val;
+	struct md_pdir_low_exclusive_fmt pde_lo_fmt;
+	struct md_pdir_low_shared_fmt	pds_lo_fmt;
+}md_pdir_low_t;
+
+
+/*
+ *   the following two "union" definitions and two
+ *   "struct" definitions are used in vmdump.c to
+ *   represent directory memory information.
+ */
+
+typedef	union	md_dir_high	{
+        md_sdir_high_t	md_sdir_high;
+        md_pdir_high_t	md_pdir_high;
+} md_dir_high_t;
+
+typedef	union	md_dir_low	{
+        md_sdir_low_t	md_sdir_low;
+        md_pdir_low_t	md_pdir_low;
+} md_dir_low_t;
+
+typedef	struct	bddir_entry	{
+        md_dir_low_t	md_dir_low;
+        md_dir_high_t	md_dir_high;
+} bddir_entry_t;
+
+typedef struct	dir_mem_entry	{
+        u64		prcpf[MAX_REGIONS];
+        bddir_entry_t	directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+} dir_mem_entry_t;
+
+
+
+typedef union md_perf_sel {
+	u64 	perf_sel_reg;
+	struct	{
+		u64	perf_rsvd : 60,
+		        perf_en   :  1,
+			perf_sel  :  3;
+	} perf_sel_bits;
+} md_perf_sel_t;
+
+typedef union md_perf_cnt {
+	u64	perf_cnt;
+	struct	{
+		u64	perf_rsvd : 44,
+	                perf_cnt  : 20;
+	} perf_cnt_bits;
+} md_perf_cnt_t;
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define DIR_ERROR_VALID_MASK	0xe000000000000000
+#define DIR_ERROR_VALID_SHFT	61
+#define DIR_ERROR_VALID_UCE	0x8000000000000000
+#define DIR_ERROR_VALID_AE	0x4000000000000000
+#define DIR_ERROR_VALID_CE	0x2000000000000000
+
+#define MEM_ERROR_VALID_MASK	0xc000000000000000
+#define MEM_ERROR_VALID_SHFT	62
+#define MEM_ERROR_VALID_UCE	0x8000000000000000
+#define MEM_ERROR_VALID_CE	0x4000000000000000
+
+#define PROTO_ERROR_VALID_MASK	0x8000000000000000
+
+#define MISC_ERROR_VALID_MASK	0x3ff
+
+/*
+ * Mask for hspec address that is stored in the dir error register.
+ * This represents bits 29 through 3.
+ */
+#define DIR_ERR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_MASK	0x3ffffff8
+#define ERROR_HSPEC_SHFT	3
+#define ERROR_ADDR_MASK		0xfffffff8
+#define ERROR_ADDR_SHFT		3
+
+/*
+ * MD_MISC_ERROR register defines.
+ */
+
+#define MMCE_VALID_MASK		0x3ff
+#define MMCE_ILL_MSG_SHFT	8
+#define MMCE_ILL_MSG_MASK	(UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT)
+#define MMCE_ILL_REV_SHFT	6
+#define MMCE_ILL_REV_MASK	(UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT)
+#define MMCE_LONG_PACK_SHFT	4
+#define MMCE_LONG_PACK_MASK	(UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT)
+#define MMCE_SHORT_PACK_SHFT	2
+#define MMCE_SHORT_PACK_MASK	(UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT)
+#define MMCE_BAD_DATA_SHFT	0
+#define MMCE_BAD_DATA_MASK	(UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT)
+
+
+#define MD_PERF_COUNTERS	6
+#define MD_PERF_SETS		6
+
+#define MEM_DIMM_MASK				0xe0000000
+#define MEM_DIMM_SHFT				29
+
+#endif /* _ASM_SN_SN0_HUBMD_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
new file mode 100644
index 0000000..b40d3ef
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -0,0 +1,255 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27.
+ *
+ * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN0_HUBNI_H
+#define _ASM_SGI_SN0_HUBNI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+/*
+ * Hub Network Interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ */
+
+#define NI_BASE			0x600000
+#define NI_BASE_TABLES		0x630000
+
+#define NI_STATUS_REV_ID	0x600000 /* Hub network status, rev, and ID */
+#define NI_PORT_RESET		0x600008 /* Reset the network interface     */
+#define NI_PROTECTION		0x600010 /* NI register access permissions  */
+#define NI_GLOBAL_PARMS		0x600018 /* LLP parameters 		    */
+#define NI_SCRATCH_REG0		0x600100 /* Scratch register 0 (64 bits)    */
+#define NI_SCRATCH_REG1		0x600108 /* Scratch register 1 (64 bits)    */
+#define NI_DIAG_PARMS		0x600110 /* Parameters for diags	    */
+
+#define NI_VECTOR_PARMS		0x600200 /* Vector PIO routing parameters   */
+#define NI_VECTOR		0x600208 /* Vector PIO route 		    */
+#define NI_VECTOR_DATA		0x600210 /* Vector PIO data 		    */
+#define NI_VECTOR_STATUS	0x600300 /* Vector PIO return status 	    */
+#define NI_RETURN_VECTOR	0x600308 /* Vector PIO return vector 	    */
+#define NI_VECTOR_READ_DATA	0x600310 /* Vector PIO read data 	    */
+#define NI_VECTOR_CLEAR		0x600380 /* Vector PIO read & clear status  */
+
+#define NI_IO_PROTECT		0x600400 /* PIO protection bits 	    */
+#define NI_IO_PROT_OVRRD	0x600408 /* PIO protection bit override     */
+
+#define NI_AGE_CPU0_MEMORY	0x600500 /* CPU 0 memory age control 	    */
+#define NI_AGE_CPU0_PIO		0x600508 /* CPU 0 PIO age control 	    */
+#define NI_AGE_CPU1_MEMORY	0x600510 /* CPU 1 memory age control 	    */
+#define NI_AGE_CPU1_PIO		0x600518 /* CPU 1 PIO age control 	    */
+#define NI_AGE_GBR_MEMORY	0x600520 /* GBR memory age control 	    */
+#define NI_AGE_GBR_PIO		0x600528 /* GBR PIO age control 	    */
+#define NI_AGE_IO_MEMORY	0x600530 /* IO memory age control 	    */
+#define NI_AGE_IO_PIO		0x600538 /* IO PIO age control 		    */
+#define NI_AGE_REG_MIN		NI_AGE_CPU0_MEMORY
+#define NI_AGE_REG_MAX		NI_AGE_IO_PIO
+
+#define NI_PORT_PARMS		0x608000 /* LLP Parameters 		    */
+#define NI_PORT_ERROR		0x608008 /* LLP Errors 			    */
+#define NI_PORT_ERROR_CLEAR	0x608088 /* Clear the error bits 	    */
+
+#define NI_META_TABLE0		0x638000 /* First meta routing table entry  */
+#define NI_META_TABLE(_x)	(NI_META_TABLE0 + (8 * (_x)))
+#define NI_META_ENTRIES		32
+
+#define NI_LOCAL_TABLE0		0x638100 /* First local routing table entry */
+#define NI_LOCAL_TABLE(_x)	(NI_LOCAL_TABLE0 + (8 * (_x)))
+#define NI_LOCAL_ENTRIES	16
+
+/*
+ * NI_STATUS_REV_ID mask and shift definitions
+ * Have to use UINT64_CAST instead of 'L' suffix, for assembler.
+ */
+
+#define NSRI_8BITMODE_SHFT	30
+#define NSRI_8BITMODE_MASK	(UINT64_CAST 0x1 << 30)
+#define NSRI_LINKUP_SHFT	29
+#define NSRI_LINKUP_MASK	(UINT64_CAST 0x1 << 29)
+#define NSRI_DOWNREASON_SHFT	28		/* 0=failed, 1=never came   */
+#define NSRI_DOWNREASON_MASK	(UINT64_CAST 0x1 << 28)	/*    out of reset. */
+#define NSRI_MORENODES_SHFT	18
+#define NSRI_MORENODES_MASK	(UINT64_CAST 1 << 18)	/* Max. # of nodes  */
+#define	 MORE_MEMORY		0
+#define	 MORE_NODES		1
+#define NSRI_REGIONSIZE_SHFT	17
+#define NSRI_REGIONSIZE_MASK	(UINT64_CAST 1 << 17)	/* Granularity 	    */
+#define	 REGIONSIZE_FINE	1
+#define	 REGIONSIZE_COARSE	0
+#define NSRI_NODEID_SHFT	8
+#define NSRI_NODEID_MASK	(UINT64_CAST 0x1ff << 8)/* Node (Hub) ID    */
+#define NSRI_REV_SHFT		4
+#define NSRI_REV_MASK		(UINT64_CAST 0xf << 4)	/* Chip Revision    */
+#define NSRI_CHIPID_SHFT	0
+#define NSRI_CHIPID_MASK	(UINT64_CAST 0xf)	/* Chip type ID     */
+
+/*
+ * In fine mode, each node is a region.  In coarse mode, there are
+ * eight nodes per region.
+ */
+#define NASID_TO_FINEREG_SHFT	0
+#define NASID_TO_COARSEREG_SHFT	3
+
+/* NI_PORT_RESET mask definitions */
+
+#define NPR_PORTRESET		(UINT64_CAST 1 << 7)	/* Send warm reset  */
+#define NPR_LINKRESET		(UINT64_CAST 1 << 1)	/* Send link reset  */
+#define NPR_LOCALRESET		(UINT64_CAST 1)		/* Reset entire hub */
+
+/* NI_PROTECTION mask and shift definitions */
+
+#define NPROT_RESETOK		(UINT64_CAST 1)
+
+/* NI_GLOBAL_PARMS mask and shift definitions */
+
+#define NGP_MAXRETRY_SHFT	48		/* Maximum retries  	    */
+#define NGP_MAXRETRY_MASK	(UINT64_CAST 0x3ff << 48)
+#define NGP_TAILTOWRAP_SHFT	32		/* Tail timeout wrap 	    */
+#define NGP_TAILTOWRAP_MASK	(UINT64_CAST 0xffff << 32)
+
+#define NGP_CREDITTOVAL_SHFT	16		/* Tail timeout wrap 	    */
+#define NGP_CREDITTOVAL_MASK	(UINT64_CAST 0xf << 16)
+#define NGP_TAILTOVAL_SHFT	4		/* Tail timeout value 	    */
+#define NGP_TAILTOVAL_MASK	(UINT64_CAST 0xf << 4)
+
+/* NI_DIAG_PARMS mask and shift definitions */
+
+#define NDP_PORTTORESET		(UINT64_CAST 1 << 18)	/* Port tmout reset */
+#define NDP_LLP8BITMODE		(UINT64_CAST 1 << 12)	/* LLP 8-bit mode   */
+#define NDP_PORTDISABLE		(UINT64_CAST 1 <<  6)	/* Port disable     */
+#define NDP_SENDERROR		(UINT64_CAST 1)		/* Send data error  */
+
+/*
+ * NI_VECTOR_PARMS mask and shift definitions.
+ * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS.
+ */
+
+#define NVP_PIOID_SHFT		40
+#define NVP_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVP_WRITEID_SHFT	32
+#define NVP_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVP_ADDRESS_MASK	(UINT64_CAST 0xffff8)	/* Bits 19:3 	    */
+#define NVP_TYPE_SHFT		0
+#define NVP_TYPE_MASK		(UINT64_CAST 0x3)
+
+/* NI_VECTOR_STATUS mask and shift definitions */
+
+#define NVS_VALID		(UINT64_CAST 1 << 63)
+#define NVS_OVERRUN		(UINT64_CAST 1 << 62)
+#define NVS_TARGET_SHFT		51
+#define NVS_TARGET_MASK		(UINT64_CAST 0x3ff << 51)
+#define NVS_PIOID_SHFT		40
+#define NVS_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
+#define NVS_WRITEID_SHFT	32
+#define NVS_WRITEID_MASK	(UINT64_CAST 0xff << 32)
+#define NVS_ADDRESS_MASK	(UINT64_CAST 0xfffffff8)   /* Bits 31:3     */
+#define NVS_TYPE_SHFT		0
+#define NVS_TYPE_MASK		(UINT64_CAST 0x7)
+#define NVS_ERROR_MASK		(UINT64_CAST 0x4)  /* bit set means error */
+
+
+#define	 PIOTYPE_READ		0	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_WRITE		1	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_UNDEFINED	2	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_EXCHANGE	3	/* VECTOR_PARMS and VECTOR_STATUS   */
+#define	 PIOTYPE_ADDR_ERR	4	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_CMD_ERR	5	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_PROT_ERR	6	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_UNKNOWN	7	/* VECTOR_STATUS only 		    */
+
+/* NI_AGE_XXX mask and shift definitions */
+
+#define NAGE_VCH_SHFT		10
+#define NAGE_VCH_MASK		(UINT64_CAST 3 << 10)
+#define NAGE_CC_SHFT		8
+#define NAGE_CC_MASK		(UINT64_CAST 3 << 8)
+#define NAGE_AGE_SHFT		0
+#define NAGE_AGE_MASK		(UINT64_CAST 0xff)
+#define NAGE_MASK		(NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK)
+
+#define	 VCHANNEL_A		0
+#define	 VCHANNEL_B		1
+#define	 VCHANNEL_ANY		2
+
+/* NI_PORT_PARMS mask and shift definitions */
+
+#define NPP_NULLTO_SHFT		10
+#define NPP_NULLTO_MASK		(UINT64_CAST 0x3f << 16)
+#define NPP_MAXBURST_SHFT	0
+#define NPP_MAXBURST_MASK	(UINT64_CAST 0x3ff)
+#define NPP_RESET_DFLT_HUB20	((UINT64_CAST 1	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+#define NPP_RESET_DEFAULTS	((UINT64_CAST 6	    << NPP_NULLTO_SHFT) | \
+				 (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+
+
+/* NI_PORT_ERROR mask and shift definitions */
+
+#define NPE_LINKRESET		(UINT64_CAST 1 << 37)
+#define NPE_INTERNALERROR	(UINT64_CAST 1 << 36)
+#define NPE_BADMESSAGE		(UINT64_CAST 1 << 35)
+#define NPE_BADDEST		(UINT64_CAST 1 << 34)
+#define NPE_FIFOOVERFLOW	(UINT64_CAST 1 << 33)
+#define NPE_CREDITTO_SHFT	28
+#define NPE_CREDITTO_MASK	(UINT64_CAST 0xf << 28)
+#define NPE_TAILTO_SHFT		24
+#define NPE_TAILTO_MASK		(UINT64_CAST 0xf << 24)
+#define NPE_RETRYCOUNT_SHFT	16
+#define NPE_RETRYCOUNT_MASK	(UINT64_CAST 0xff << 16)
+#define NPE_CBERRCOUNT_SHFT	8
+#define NPE_CBERRCOUNT_MASK	(UINT64_CAST 0xff << 8)
+#define NPE_SNERRCOUNT_SHFT	0
+#define NPE_SNERRCOUNT_MASK	(UINT64_CAST 0xff << 0)
+#define NPE_MASK		0x3effffffff
+
+#define NPE_COUNT_MAX		0xff
+
+#define NPE_FATAL_ERRORS	(NPE_LINKRESET | NPE_INTERNALERROR |	\
+				 NPE_BADMESSAGE | NPE_BADDEST |		\
+				 NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK |	\
+				 NPE_TAILTO_MASK)
+
+/* NI_META_TABLE mask and shift definitions */
+
+#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+/* NI_LOCAL_TABLE mask and shift definitions */
+
+#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+#ifndef __ASSEMBLY__
+
+typedef union	hubni_port_error_u {
+	u64	nipe_reg_value;
+	struct {
+	    u64	nipe_rsvd:	26,	/* unused */
+		nipe_lnk_reset:	 1,	/* link reset */
+		nipe_intl_err:	 1,	/* internal error */
+		nipe_bad_msg:	 1,	/* bad message */
+		nipe_bad_dest:	 1,	/* bad dest	*/
+		nipe_fifo_ovfl:	 1,	/* fifo overflow */
+		nipe_rsvd1:	 1,	/* unused */
+		nipe_credit_to:	 4,	/* credit timeout */
+		nipe_tail_to:	 4,	/* tail timeout */
+		nipe_retry_cnt:	 8,	/* retry error count */
+		nipe_cb_cnt:	 8,	/* checkbit error count */
+		nipe_sn_cnt:	 8;	/* sequence number count */
+	} nipe_fields_s;
+} hubni_port_error_t;
+
+#define NI_LLP_RETRY_MAX	0xff
+#define NI_LLP_CB_MAX		0xff
+#define NI_LLP_SN_MAX		0xff
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
new file mode 100644
index 0000000..e39f5f9
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef	_ASM_SN_SN0_HUBPI_H
+#define	_ASM_SN_SN0_HUBPI_H
+
+#include <linux/types.h>
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * All register "addresses" are actually offsets.  Use the LOCAL_HUB
+ * or REMOTE_HUB macros to synthesize an actual address
+ */
+
+#define PI_BASE			0x000000
+
+/* General protection and control registers */
+
+#define PI_CPU_PROTECT		0x000000 /* CPU Protection 		    */
+#define PI_PROT_OVERRD		0x000008 /* Clear CPU Protection bit 	    */
+#define	PI_IO_PROTECT		0x000010 /* Interrupt Pending Protection    */
+#define PI_REGION_PRESENT	0x000018 /* Indicates whether region exists */
+#define PI_CPU_NUM		0x000020 /* CPU Number ID 		    */
+#define PI_CALIAS_SIZE		0x000028 /* Cached Alias Size 		    */
+#define PI_MAX_CRB_TIMEOUT	0x000030 /* Maximum Timeout for CRB 	    */
+#define PI_CRB_SFACTOR		0x000038 /* Scale factor for CRB timeout    */
+
+/* CALIAS values */
+#define PI_CALIAS_SIZE_0	0
+#define PI_CALIAS_SIZE_4K	1
+#define PI_CALIAS_SIZE_8K	2
+#define PI_CALIAS_SIZE_16K	3
+#define PI_CALIAS_SIZE_32K	4
+#define PI_CALIAS_SIZE_64K	5
+#define PI_CALIAS_SIZE_128K	6
+#define PI_CALIAS_SIZE_256K	7
+#define PI_CALIAS_SIZE_512K	8
+#define PI_CALIAS_SIZE_1M	9
+#define PI_CALIAS_SIZE_2M	10
+#define PI_CALIAS_SIZE_4M	11
+#define PI_CALIAS_SIZE_8M	12
+#define PI_CALIAS_SIZE_16M	13
+#define PI_CALIAS_SIZE_32M	14
+#define PI_CALIAS_SIZE_64M	15
+
+/* Processor control and status checking */
+
+#define PI_CPU_PRESENT_A	0x000040 /* CPU Present A 		    */
+#define PI_CPU_PRESENT_B	0x000048 /* CPU Present B 		    */
+#define PI_CPU_ENABLE_A		0x000050 /* CPU Enable A 		    */
+#define PI_CPU_ENABLE_B		0x000058 /* CPU Enable B 		    */
+#define PI_REPLY_LEVEL		0x000060 /* Reply Level		 	    */
+#define PI_HARDRESET_BIT	0x020068 /* Bit cleared by s/w on SR	    */
+#define PI_NMI_A		0x000070 /* NMI to CPU A 		    */
+#define PI_NMI_B		0x000078 /* NMI to CPU B 		    */
+#define PI_NMI_OFFSET		(PI_NMI_B - PI_NMI_A)
+#define PI_SOFTRESET		0x000080 /* Softreset (to both CPUs) 	    */
+
+/* Regular Interrupt register checking.  */
+
+#define PI_INT_PEND_MOD		0x000090 /* Write to set pending ints	    */
+#define PI_INT_PEND0		0x000098 /* Read to get pending ints 	    */
+#define PI_INT_PEND1		0x0000a0 /* Read to get pending ints 	    */
+#define PI_INT_MASK0_A		0x0000a8 /* Interrupt Mask 0 for CPU A 	    */
+#define PI_INT_MASK1_A		0x0000b0 /* Interrupt Mask 1 for CPU A 	    */
+#define PI_INT_MASK0_B		0x0000b8 /* Interrupt Mask 0 for CPU B 	    */
+#define PI_INT_MASK1_B		0x0000c0 /* Interrupt Mask 1 for CPU B 	    */
+
+#define PI_INT_MASK_OFFSET	0x10	 /* Offset from A to B 		    */
+
+/* Crosscall interrupts */
+
+#define PI_CC_PEND_SET_A	0x0000c8 /* CC Interrupt Pending Set, CPU A */
+#define PI_CC_PEND_SET_B	0x0000d0 /* CC Interrupt Pending Set, CPU B */
+#define PI_CC_PEND_CLR_A	0x0000d8 /* CC Interrupt Pending Clr, CPU A */
+#define PI_CC_PEND_CLR_B	0x0000e0 /* CC Interrupt Pending Clr, CPU B */
+#define PI_CC_MASK		0x0000e8 /* CC Interrupt mask 		    */
+
+#define PI_INT_SET_OFFSET	0x08	 /* Offset from A to B 		    */
+
+/* Realtime Counter and Profiler control registers */
+
+#define PI_RT_COUNT		0x030100 /* Real Time Counter 		    */
+#define PI_RT_COMPARE_A		0x000108 /* Real Time Compare A 	    */
+#define PI_RT_COMPARE_B		0x000110 /* Real Time Compare B 	    */
+#define PI_PROFILE_COMPARE	0x000118 /* L5 int to both cpus when == RTC */
+#define PI_RT_PEND_A		0x000120 /* Set if RT int for A pending     */
+#define PI_RT_PEND_B		0x000128 /* Set if RT int for B pending     */
+#define PI_PROF_PEND_A		0x000130 /* Set if Prof int for A pending   */
+#define PI_PROF_PEND_B		0x000138 /* Set if Prof int for B pending   */
+#define PI_RT_EN_A		0x000140 /* RT int for CPU A enable 	    */
+#define PI_RT_EN_B		0x000148 /* RT int for CPU B enable 	    */
+#define PI_PROF_EN_A		0x000150 /* PROF int for CPU A enable 	    */
+#define PI_PROF_EN_B		0x000158 /* PROF int for CPU B enable 	    */
+#define PI_RT_LOCAL_CTRL	0x000160 /* RT control register 	    */
+#define PI_RT_FILTER_CTRL	0x000168 /* GCLK Filter control register    */
+
+#define PI_COUNT_OFFSET		0x08	 /* A to B offset for all counts    */
+
+/* Built-In Self Test support */
+
+#define PI_BIST_WRITE_DATA	0x000200 /* BIST write data 		    */
+#define PI_BIST_READ_DATA	0x000208 /* BIST read data 		    */
+#define PI_BIST_COUNT_TARG	0x000210 /* BIST Count and Target 	    */
+#define PI_BIST_READY		0x000218 /* BIST Ready indicator 	    */
+#define PI_BIST_SHIFT_LOAD	0x000220 /* BIST control 		    */
+#define PI_BIST_SHIFT_UNLOAD	0x000228 /* BIST control 		    */
+#define PI_BIST_ENTER_RUN	0x000230 /* BIST control 		    */
+
+/* Graphics control registers */
+
+#define PI_GFX_PAGE_A		0x000300 /* Graphics page A 		    */
+#define PI_GFX_CREDIT_CNTR_A	0x000308 /* Graphics credit counter A 	    */
+#define PI_GFX_BIAS_A		0x000310 /* Graphics bias A 		    */
+#define PI_GFX_INT_CNTR_A	0x000318 /* Graphics interrupt counter A    */
+#define PI_GFX_INT_CMP_A	0x000320 /* Graphics interrupt comparator A */
+#define PI_GFX_PAGE_B		0x000328 /* Graphics page B 		    */
+#define PI_GFX_CREDIT_CNTR_B	0x000330 /* Graphics credit counter B 	    */
+#define PI_GFX_BIAS_B		0x000338 /* Graphics bias B 		    */
+#define PI_GFX_INT_CNTR_B	0x000340 /* Graphics interrupt counter B    */
+#define PI_GFX_INT_CMP_B	0x000348 /* Graphics interrupt comparator B */
+
+#define PI_GFX_OFFSET		(PI_GFX_PAGE_B - PI_GFX_PAGE_A)
+#define PI_GFX_PAGE_ENABLE	0x0000010000000000LL
+
+/* Error and timeout registers */
+#define PI_ERR_INT_PEND		0x000400 /* Error Interrupt Pending	    */
+#define PI_ERR_INT_MASK_A	0x000408 /* Error Interrupt mask for CPU A  */
+#define PI_ERR_INT_MASK_B	0x000410 /* Error Interrupt mask for CPU B  */
+#define PI_ERR_STACK_ADDR_A	0x000418 /* Error stack address for CPU A   */
+#define PI_ERR_STACK_ADDR_B	0x000420 /* Error stack address for CPU B   */
+#define PI_ERR_STACK_SIZE	0x000428 /* Error Stack Size 		    */
+#define PI_ERR_STATUS0_A	0x000430 /* Error Status 0A 		    */
+#define PI_ERR_STATUS0_A_RCLR	0x000438 /* Error Status 0A clear on read   */
+#define PI_ERR_STATUS1_A	0x000440 /* Error Status 1A 		    */
+#define PI_ERR_STATUS1_A_RCLR	0x000448 /* Error Status 1A clear on read   */
+#define PI_ERR_STATUS0_B	0x000450 /* Error Status 0B 		    */
+#define PI_ERR_STATUS0_B_RCLR	0x000458 /* Error Status 0B clear on read   */
+#define PI_ERR_STATUS1_B	0x000460 /* Error Status 1B 		    */
+#define PI_ERR_STATUS1_B_RCLR	0x000468 /* Error Status 1B clear on read   */
+#define PI_SPOOL_CMP_A		0x000470 /* Spool compare for CPU A 	    */
+#define PI_SPOOL_CMP_B		0x000478 /* Spool compare for CPU B 	    */
+#define PI_CRB_TIMEOUT_A	0x000480 /* Timed out CRB entries for A     */
+#define PI_CRB_TIMEOUT_B	0x000488 /* Timed out CRB entries for B     */
+#define PI_SYSAD_ERRCHK_EN	0x000490 /* Enables SYSAD error checking    */
+#define PI_BAD_CHECK_BIT_A	0x000498 /* Force SYSAD check bit error     */
+#define PI_BAD_CHECK_BIT_B	0x0004a0 /* Force SYSAD check bit error     */
+#define PI_NACK_CNT_A		0x0004a8 /* Consecutive NACK counter 	    */
+#define PI_NACK_CNT_B		0x0004b0 /* 	"	" for CPU B 	    */
+#define PI_NACK_CMP		0x0004b8 /* NACK count compare		    */
+#define PI_STACKADDR_OFFSET	(PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
+#define PI_ERRSTAT_OFFSET	(PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
+#define PI_RDCLR_OFFSET		(PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A)
+
+/* Bits in PI_ERR_INT_PEND */
+#define PI_ERR_SPOOL_CMP_B	0x00000001	/* Spool end hit high water */
+#define PI_ERR_SPOOL_CMP_A	0x00000002
+#define PI_ERR_SPUR_MSG_B	0x00000004	/* Spurious message intr.   */
+#define PI_ERR_SPUR_MSG_A	0x00000008
+#define PI_ERR_WRB_TERR_B	0x00000010	/* WRB TERR		    */
+#define PI_ERR_WRB_TERR_A	0x00000020
+#define PI_ERR_WRB_WERR_B	0x00000040	/* WRB WERR 		    */
+#define PI_ERR_WRB_WERR_A	0x00000080
+#define PI_ERR_SYSSTATE_B	0x00000100	/* SysState parity error    */
+#define PI_ERR_SYSSTATE_A	0x00000200
+#define PI_ERR_SYSAD_DATA_B	0x00000400	/* SysAD data parity error  */
+#define PI_ERR_SYSAD_DATA_A	0x00000800
+#define PI_ERR_SYSAD_ADDR_B	0x00001000	/* SysAD addr parity error  */
+#define PI_ERR_SYSAD_ADDR_A	0x00002000
+#define PI_ERR_SYSCMD_DATA_B	0x00004000	/* SysCmd data parity error */
+#define PI_ERR_SYSCMD_DATA_A	0x00008000
+#define PI_ERR_SYSCMD_ADDR_B	0x00010000	/* SysCmd addr parity error */
+#define PI_ERR_SYSCMD_ADDR_A	0x00020000
+#define PI_ERR_BAD_SPOOL_B	0x00040000	/* Error spooling to memory */
+#define PI_ERR_BAD_SPOOL_A	0x00080000
+#define PI_ERR_UNCAC_UNCORR_B	0x00100000	/* Uncached uncorrectable   */
+#define PI_ERR_UNCAC_UNCORR_A	0x00200000
+#define PI_ERR_SYSSTATE_TAG_B	0x00400000	/* SysState tag parity error */
+#define PI_ERR_SYSSTATE_TAG_A	0x00800000
+#define PI_ERR_MD_UNCORR	0x01000000	/* Must be cleared in MD    */
+
+#define PI_ERR_CLEAR_ALL_A	0x00aaaaaa
+#define PI_ERR_CLEAR_ALL_B	0x00555555
+
+
+/*
+ * The following three macros define all possible error int pends.
+ */
+
+#define PI_FATAL_ERR_CPU_A	(PI_ERR_SYSSTATE_TAG_A 	| \
+				 PI_ERR_BAD_SPOOL_A 	| \
+				 PI_ERR_SYSCMD_ADDR_A 	| \
+				 PI_ERR_SYSCMD_DATA_A 	| \
+				 PI_ERR_SYSAD_ADDR_A 	| \
+				 PI_ERR_SYSAD_DATA_A	| \
+				 PI_ERR_SYSSTATE_A)
+
+#define PI_MISC_ERR_CPU_A	(PI_ERR_UNCAC_UNCORR_A 	| \
+				 PI_ERR_WRB_WERR_A 	| \
+				 PI_ERR_WRB_TERR_A 	| \
+				 PI_ERR_SPUR_MSG_A 	| \
+				 PI_ERR_SPOOL_CMP_A)
+
+#define PI_FATAL_ERR_CPU_B	(PI_ERR_SYSSTATE_TAG_B 	| \
+				 PI_ERR_BAD_SPOOL_B 	| \
+				 PI_ERR_SYSCMD_ADDR_B 	| \
+				 PI_ERR_SYSCMD_DATA_B 	| \
+				 PI_ERR_SYSAD_ADDR_B 	| \
+				 PI_ERR_SYSAD_DATA_B	| \
+				 PI_ERR_SYSSTATE_B)
+
+#define PI_MISC_ERR_CPU_B 	(PI_ERR_UNCAC_UNCORR_B  | \
+				 PI_ERR_WRB_WERR_B 	| \
+				 PI_ERR_WRB_TERR_B 	| \
+				 PI_ERR_SPUR_MSG_B 	| \
+				 PI_ERR_SPOOL_CMP_B)
+
+#define PI_ERR_GENERIC	(PI_ERR_MD_UNCORR)
+
+/*
+ * Error types for PI_ERR_STATUS0_[AB] and error stack:
+ * Use the write types if WRBRRB is 1 else use the read types
+ */
+
+/* Fields in PI_ERR_STATUS0_[AB] */
+#define PI_ERR_ST0_TYPE_MASK	0x0000000000000007
+#define PI_ERR_ST0_TYPE_SHFT	0
+#define PI_ERR_ST0_REQNUM_MASK	0x0000000000000038
+#define PI_ERR_ST0_REQNUM_SHFT	3
+#define PI_ERR_ST0_SUPPL_MASK	0x000000000001ffc0
+#define PI_ERR_ST0_SUPPL_SHFT	6
+#define PI_ERR_ST0_CMD_MASK	0x0000000001fe0000
+#define PI_ERR_ST0_CMD_SHFT	17
+#define PI_ERR_ST0_ADDR_MASK	0x3ffffffffe000000
+#define PI_ERR_ST0_ADDR_SHFT	25
+#define PI_ERR_ST0_OVERRUN_MASK	0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT	62
+#define PI_ERR_ST0_VALID_MASK	0x8000000000000000
+#define PI_ERR_ST0_VALID_SHFT	63
+
+/* Fields in PI_ERR_STATUS1_[AB] */
+#define PI_ERR_ST1_SPOOL_MASK	0x00000000001fffff
+#define PI_ERR_ST1_SPOOL_SHFT	0
+#define PI_ERR_ST1_TOUTCNT_MASK	0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT	21
+#define PI_ERR_ST1_INVCNT_MASK	0x0000007fe0000000
+#define PI_ERR_ST1_INVCNT_SHFT	29
+#define PI_ERR_ST1_CRBNUM_MASK	0x0000038000000000
+#define PI_ERR_ST1_CRBNUM_SHFT	39
+#define PI_ERR_ST1_WRBRRB_MASK	0x0000040000000000
+#define PI_ERR_ST1_WRBRRB_SHFT	42
+#define PI_ERR_ST1_CRBSTAT_MASK	0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT	43
+#define PI_ERR_ST1_MSGSRC_MASK	0xffe0000000000000
+#define PI_ERR_ST1_MSGSRC_SHFT	53
+
+/* Fields in the error stack */
+#define PI_ERR_STK_TYPE_MASK	0x0000000000000003
+#define PI_ERR_STK_TYPE_SHFT	0
+#define PI_ERR_STK_SUPPL_MASK	0x0000000000000038
+#define PI_ERR_STK_SUPPL_SHFT	3
+#define PI_ERR_STK_REQNUM_MASK	0x00000000000001c0
+#define PI_ERR_STK_REQNUM_SHFT	6
+#define PI_ERR_STK_CRBNUM_MASK	0x0000000000000e00
+#define PI_ERR_STK_CRBNUM_SHFT	9
+#define PI_ERR_STK_WRBRRB_MASK	0x0000000000001000
+#define PI_ERR_STK_WRBRRB_SHFT	12
+#define PI_ERR_STK_CRBSTAT_MASK	0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT	13
+#define PI_ERR_STK_CMD_MASK	0x000000007f800000
+#define PI_ERR_STK_CMD_SHFT	23
+#define PI_ERR_STK_ADDR_MASK	0xffffffff80000000
+#define PI_ERR_STK_ADDR_SHFT	31
+
+/* Error type in the error status or stack on Read CRBs */
+#define PI_ERR_RD_PRERR		1
+#define PI_ERR_RD_DERR		2
+#define PI_ERR_RD_TERR		3
+
+/* Error type in the error status or stack on Write CRBs */
+#define PI_ERR_WR_WERR		0
+#define PI_ERR_WR_PWERR		1
+#define PI_ERR_WR_TERR		3
+
+/* Read or Write CRB in error status or stack */
+#define PI_ERR_RRB	0
+#define PI_ERR_WRB	1
+#define PI_ERR_ANY_CRB	2
+
+/* Address masks in the error status and error stack are not the same */
+#define ERR_STK_ADDR_SHFT	7
+#define ERR_STAT0_ADDR_SHFT	3
+
+#define PI_MIN_STACK_SIZE 4096	/* For figuring out the size to set */
+#define PI_STACK_SIZE_SHFT	12	/* 4k */
+
+#define ERR_STACK_SIZE_BYTES(_sz) \
+       ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * format of error stack and error status registers.
+ */
+
+struct err_stack_format {
+	u64	sk_addr	   : 33,   /* address */
+		sk_cmd	   :  8,   /* message command */
+		sk_crb_sts : 10,   /* status from RRB or WRB */
+		sk_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		sk_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		sk_t5_req  :  3,   /* RRB T5 request number */
+		sk_suppl   :  3,   /* lowest 3 bit of supplemental */
+		sk_err_type:  3;   /* error type	*/
+};
+
+typedef union pi_err_stack {
+	u64	pi_stk_word;
+	struct	err_stack_format pi_stk_fmt;
+} pi_err_stack_t;
+
+struct err_status0_format {
+	u64	s0_valid   :  1,   /* Valid */
+		s0_ovr_run :  1,   /* Overrun, spooled to memory */
+		s0_addr	   : 37,   /* address */
+		s0_cmd	   :  8,   /* message command */
+		s0_supl	   : 11,   /* message supplemental field */
+		s0_t5_req  :  3,   /* RRB T5 request number */
+		s0_err_type:  3;   /* error type */
+};
+
+typedef union pi_err_stat0 {
+	u64	pi_stat0_word;
+	struct err_status0_format pi_stat0_fmt;
+} pi_err_stat0_t;
+
+struct err_status1_format {
+	u64	s1_src	   : 11,   /* message source */
+		s1_crb_sts : 10,   /* status from RRB or WRB */
+		s1_rw_rb   :  1,   /* RRB == 0, WRB == 1 */
+		s1_crb_num :  3,   /* WRB (0 to 7) or RRB (0 to 4) */
+		s1_inval_cnt:10,   /* signed invalidate counter RRB */
+		s1_to_cnt  :  8,   /* crb timeout counter */
+		s1_spl_cnt : 21;   /* number spooled to memory */
+};
+
+typedef union pi_err_stat1 {
+	u64	pi_stat1_word;
+	struct err_status1_format pi_stat1_fmt;
+} pi_err_stat1_t;
+
+typedef u64	rtc_time_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* Bits in PI_SYSAD_ERRCHK_EN */
+#define PI_SYSAD_ERRCHK_ECCGEN	0x01	/* Enable ECC generation	    */
+#define PI_SYSAD_ERRCHK_QUALGEN	0x02	/* Enable data quality signal gen.  */
+#define PI_SYSAD_ERRCHK_SADP	0x04	/* Enable SysAD parity checking     */
+#define PI_SYSAD_ERRCHK_CMDP	0x08	/* Enable SysCmd parity checking    */
+#define PI_SYSAD_ERRCHK_STATE	0x10	/* Enable SysState parity checking  */
+#define PI_SYSAD_ERRCHK_QUAL	0x20	/* Enable data quality checking     */
+#define PI_SYSAD_CHECK_ALL	0x3f	/* Generate and check all signals.  */
+
+/* Interrupt pending bits on R10000 */
+
+#define HUB_IP_PEND0		0x0400
+#define HUB_IP_PEND1_CC		0x0800
+#define HUB_IP_RT		0x1000
+#define HUB_IP_PROF		0x2000
+#define HUB_IP_ERROR		0x4000
+#define HUB_IP_MASK		0x7c00
+
+/* PI_RT_LOCAL_CTRL mask and shift definitions */
+
+#define PRLC_USE_INT_SHFT	16
+#define PRLC_USE_INT_MASK	(UINT64_CAST 1 << 16)
+#define PRLC_USE_INT		(UINT64_CAST 1 << 16)
+#define PRLC_GCLK_SHFT		15
+#define PRLC_GCLK_MASK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK		(UINT64_CAST 1 << 15)
+#define PRLC_GCLK_COUNT_SHFT	8
+#define PRLC_GCLK_COUNT_MASK	(UINT64_CAST 0x7f << 8)
+#define PRLC_MAX_COUNT_SHFT	1
+#define PRLC_MAX_COUNT_MASK	(UINT64_CAST 0x7f << 1)
+#define PRLC_GCLK_EN_SHFT	0
+#define PRLC_GCLK_EN_MASK	(UINT64_CAST 1)
+#define PRLC_GCLK_EN		(UINT64_CAST 1)
+
+/* PI_RT_FILTER_CTRL mask and shift definitions */
+
+/*
+ * Bits for NACK_CNT_A/B and NACK_CMP
+ */
+#define PI_NACK_CNT_EN_SHFT	20
+#define PI_NACK_CNT_EN_MASK	0x100000
+#define PI_NACK_CNT_MASK	0x0fffff
+#define PI_NACK_CNT_MAX		0x0fffff
+
+#endif /* _ASM_SN_SN0_HUBPI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
new file mode 100644
index 0000000..3c97e08
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/ip27.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/IP27.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2006 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_IP27_H
+#define _ASM_SN_SN0_IP27_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * Simple definitions for the masks which remove SW bits from pte.
+ */
+
+#define TLBLO_HWBITSHIFT	0		/* Shift value, for masking */
+
+#ifndef __ASSEMBLY__
+
+#define CAUSE_BERRINTR 		IE_IRQ5
+
+#define ECCF_CACHE_ERR  0
+#define ECCF_TAGLO      1
+#define ECCF_ECC        2
+#define ECCF_ERROREPC   3
+#define ECCF_PADDR      4
+#define ECCF_SIZE       (5 * sizeof(long))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
+ * the processor number of the calling processor.  The proc parameters
+ * must be a register.
+ */
+#define KL_GET_CPUNUM(proc) 				\
+	dli	proc, LOCAL_HUB(0); 			\
+	ld	proc, PI_CPU_NUM(proc)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * R10000 status register interrupt bit mask usage for IP27.
+ */
+#define SRB_SWTIMO	IE_SW0		/* 0x0100 */
+#define SRB_NET		IE_SW1		/* 0x0200 */
+#define SRB_DEV0	IE_IRQ0		/* 0x0400 */
+#define SRB_DEV1	IE_IRQ1		/* 0x0800 */
+#define SRB_TIMOCLK	IE_IRQ2		/* 0x1000 */
+#define SRB_PROFCLK	IE_IRQ3		/* 0x2000 */
+#define SRB_ERR		IE_IRQ4		/* 0x4000 */
+#define SRB_SCHEDCLK	IE_IRQ5		/* 0x8000 */
+
+#define SR_IBIT_HI	SRB_DEV0
+#define SR_IBIT_PROF	SRB_PROFCLK
+
+#define SRB_SWTIMO_IDX		0
+#define SRB_NET_IDX		1
+#define SRB_DEV0_IDX		2
+#define SRB_DEV1_IDX		3
+#define SRB_TIMOCLK_IDX		4
+#define SRB_PROFCLK_IDX		5
+#define SRB_ERR_IDX		6
+#define SRB_SCHEDCLK_IDX	7
+
+#define NUM_CAUSE_INTRS		8
+
+#define SCACHE_LINESIZE	128
+#define SCACHE_LINEMASK	(SCACHE_LINESIZE - 1)
+
+#include <asm/sn/addrs.h>
+
+#define LED_CYCLE_MASK  0x0f
+#define LED_CYCLE_SHFT  4
+
+#define SEND_NMI(_nasid, _slice)	\
+          REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
+#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h
new file mode 100644
index 0000000..1a2c302
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn_private.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SN_SN_PRIVATE_H
+#define __ASM_SN_SN_PRIVATE_H
+
+#include <asm/sn/types.h>
+
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
+extern cnodeid_t get_compact_nodeid(void);
+extern void hub_rtc_init(cnodeid_t);
+extern void cpu_time_init(void);
+extern void per_cpu_init(void);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void setup_replication_mask(void);
+extern void replicate_kernel_text(void);
+extern pfn_t node_getfirstfree(cnodeid_t);
+
+#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
new file mode 100644
index 0000000..74d0bb2
--- /dev/null
+++ b/arch/mips/include/asm/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_TYPES_H
+#define _ASM_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef unsigned long	cnodemask_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed short	cnodeid_t;	/* node id in compact-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef signed short	moduleid_t;	/* user-visible module number type */
+typedef signed short	cmoduleid_t;	/* kernel compact module id type */
+typedef unsigned char	clusterid_t;	/* Clusterid of the cell */
+typedef unsigned long 	pfn_t;
+
+typedef dev_t		vertex_hdl_t;	/* hardware graph vertex handle */
+
+#endif /* _ASM_SN_TYPES_H */
diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h
new file mode 100644
index 0000000..8c1eb02
--- /dev/null
+++ b/arch/mips/include/asm/sni.h
@@ -0,0 +1,244 @@
+/*
+ * SNI specific definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1998 by Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+#ifndef __ASM_SNI_H
+#define __ASM_SNI_H
+
+extern unsigned int sni_brd_type;
+
+#define SNI_BRD_10                 2
+#define SNI_BRD_10NEW              3
+#define SNI_BRD_TOWER_OASIC        4
+#define SNI_BRD_MINITOWER          5
+#define SNI_BRD_PCI_TOWER          6
+#define SNI_BRD_RM200              7
+#define SNI_BRD_PCI_MTOWER         8
+#define SNI_BRD_PCI_DESKTOP        9
+#define SNI_BRD_PCI_TOWER_CPLUS   10
+#define SNI_BRD_PCI_MTOWER_CPLUS  11
+
+/* RM400 cpu types */
+#define SNI_CPU_M8021           0x01
+#define SNI_CPU_M8030           0x04
+#define SNI_CPU_M8031           0x06
+#define SNI_CPU_M8034           0x0f
+#define SNI_CPU_M8037           0x07
+#define SNI_CPU_M8040           0x05
+#define SNI_CPU_M8043           0x09
+#define SNI_CPU_M8050           0x0b
+#define SNI_CPU_M8053           0x0d
+
+#define SNI_PORT_BASE		CKSEG1ADDR(0xb4000000)
+
+#ifndef __MIPSEL__
+/*
+ * ASIC PCI registers for big endian configuration.
+ */
+#define PCIMT_UCONF		CKSEG1ADDR(0xbfff0004)
+#define PCIMT_IOADTIMEOUT2	CKSEG1ADDR(0xbfff000c)
+#define PCIMT_IOMEMCONF		CKSEG1ADDR(0xbfff0014)
+#define PCIMT_IOMMU		CKSEG1ADDR(0xbfff001c)
+#define PCIMT_IOADTIMEOUT1	CKSEG1ADDR(0xbfff0024)
+#define PCIMT_DMAACCESS		CKSEG1ADDR(0xbfff002c)
+#define PCIMT_DMAHIT		CKSEG1ADDR(0xbfff0034)
+#define PCIMT_ERRSTATUS		CKSEG1ADDR(0xbfff003c)
+#define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0044)
+#define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff004c)
+#define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0054)
+#define  IT_INT2		0x01
+#define  IT_INTD		0x02
+#define  IT_INTC		0x04
+#define  IT_INTB		0x08
+#define  IT_INTA		0x10
+#define  IT_EISA		0x20
+#define  IT_SCSI		0x40
+#define  IT_ETH			0x80
+#define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff005c)
+#define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0064)
+#define PCIMT_ECCREG		CKSEG1ADDR(0xbfff006c)
+#define PCIMT_CONFIG_ADDRESS	CKSEG1ADDR(0xbfff0074)
+#define PCIMT_ASIC_ID		CKSEG1ADDR(0xbfff007c)	/* read */
+#define PCIMT_SOFT_RESET	CKSEG1ADDR(0xbfff007c)	/* write */
+#define PCIMT_PIA_OE		CKSEG1ADDR(0xbfff0084)
+#define PCIMT_PIA_DATAOUT	CKSEG1ADDR(0xbfff008c)
+#define PCIMT_PIA_DATAIN	CKSEG1ADDR(0xbfff0094)
+#define PCIMT_CACHECONF		CKSEG1ADDR(0xbfff009c)
+#define PCIMT_INVSPACE		CKSEG1ADDR(0xbfff00a4)
+#else
+/*
+ * ASIC PCI registers for little endian configuration.
+ */
+#define PCIMT_UCONF		CKSEG1ADDR(0xbfff0000)
+#define PCIMT_IOADTIMEOUT2	CKSEG1ADDR(0xbfff0008)
+#define PCIMT_IOMEMCONF		CKSEG1ADDR(0xbfff0010)
+#define PCIMT_IOMMU		CKSEG1ADDR(0xbfff0018)
+#define PCIMT_IOADTIMEOUT1	CKSEG1ADDR(0xbfff0020)
+#define PCIMT_DMAACCESS		CKSEG1ADDR(0xbfff0028)
+#define PCIMT_DMAHIT		CKSEG1ADDR(0xbfff0030)
+#define PCIMT_ERRSTATUS		CKSEG1ADDR(0xbfff0038)
+#define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0040)
+#define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff0048)
+#define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0050)
+#define  IT_INT2		0x01
+#define  IT_INTD		0x02
+#define  IT_INTC		0x04
+#define  IT_INTB		0x08
+#define  IT_INTA		0x10
+#define  IT_EISA		0x20
+#define  IT_SCSI		0x40
+#define  IT_ETH			0x80
+#define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff0058)
+#define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0060)
+#define PCIMT_ECCREG		CKSEG1ADDR(0xbfff0068)
+#define PCIMT_CONFIG_ADDRESS	CKSEG1ADDR(0xbfff0070)
+#define PCIMT_ASIC_ID		CKSEG1ADDR(0xbfff0078)	/* read */
+#define PCIMT_SOFT_RESET	CKSEG1ADDR(0xbfff0078)	/* write */
+#define PCIMT_PIA_OE		CKSEG1ADDR(0xbfff0080)
+#define PCIMT_PIA_DATAOUT	CKSEG1ADDR(0xbfff0088)
+#define PCIMT_PIA_DATAIN	CKSEG1ADDR(0xbfff0090)
+#define PCIMT_CACHECONF		CKSEG1ADDR(0xbfff0098)
+#define PCIMT_INVSPACE		CKSEG1ADDR(0xbfff00a0)
+#endif
+
+#define PCIMT_PCI_CONF		CKSEG1ADDR(0xbfff0100)
+
+/*
+ * Data port for the PCI bus in IO space
+ */
+#define PCIMT_CONFIG_DATA	0x0cfc
+
+/*
+ * Board specific registers
+ */
+#define PCIMT_CSMSR		CKSEG1ADDR(0xbfd00000)
+#define PCIMT_CSSWITCH		CKSEG1ADDR(0xbfd10000)
+#define PCIMT_CSITPEND		CKSEG1ADDR(0xbfd20000)
+#define PCIMT_AUTO_PO_EN	CKSEG1ADDR(0xbfd30000)
+#define PCIMT_CLR_TEMP		CKSEG1ADDR(0xbfd40000)
+#define PCIMT_AUTO_PO_DIS	CKSEG1ADDR(0xbfd50000)
+#define PCIMT_EXMSR		CKSEG1ADDR(0xbfd60000)
+#define PCIMT_UNUSED1		CKSEG1ADDR(0xbfd70000)
+#define PCIMT_CSWCSM		CKSEG1ADDR(0xbfd80000)
+#define PCIMT_UNUSED2		CKSEG1ADDR(0xbfd90000)
+#define PCIMT_CSLED		CKSEG1ADDR(0xbfda0000)
+#define PCIMT_CSMAPISA		CKSEG1ADDR(0xbfdb0000)
+#define PCIMT_CSRSTBP		CKSEG1ADDR(0xbfdc0000)
+#define PCIMT_CLRPOFF		CKSEG1ADDR(0xbfdd0000)
+#define PCIMT_CSTIMER		CKSEG1ADDR(0xbfde0000)
+#define PCIMT_PWDN		CKSEG1ADDR(0xbfdf0000)
+
+/*
+ * A20R based boards
+ */
+#define A20R_PT_CLOCK_BASE      CKSEG1ADDR(0xbc040000)
+#define A20R_PT_TIM0_ACK        CKSEG1ADDR(0xbc050000)
+#define A20R_PT_TIM1_ACK        CKSEG1ADDR(0xbc060000)
+
+#define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
+#define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)
+
+#define SNI_PCIT_INT_REG        CKSEG1ADDR(0xbfff000c)
+
+#define SNI_PCIT_INT_START      24
+#define SNI_PCIT_INT_END        30
+
+#define PCIT_IRQ_ETHERNET       (MIPS_CPU_IRQ_BASE + 5)
+#define PCIT_IRQ_INTA           (SNI_PCIT_INT_START + 0)
+#define PCIT_IRQ_INTB           (SNI_PCIT_INT_START + 1)
+#define PCIT_IRQ_INTC           (SNI_PCIT_INT_START + 2)
+#define PCIT_IRQ_INTD           (SNI_PCIT_INT_START + 3)
+#define PCIT_IRQ_SCSI0          (SNI_PCIT_INT_START + 4)
+#define PCIT_IRQ_SCSI1          (SNI_PCIT_INT_START + 5)
+
+
+/*
+ * Interrupt 0-16 are EISA interrupts.  Interrupts from 16 on are assigned
+ * to the other interrupts generated by ASIC PCI.
+ *
+ * INT2 is a wired-or of the push button interrupt, high temperature interrupt
+ * ASIC PCI interrupt.
+ */
+#define PCIMT_KEYBOARD_IRQ	 1
+#define PCIMT_IRQ_INT2		24
+#define PCIMT_IRQ_INTD		25
+#define PCIMT_IRQ_INTC		26
+#define PCIMT_IRQ_INTB		27
+#define PCIMT_IRQ_INTA		28
+#define PCIMT_IRQ_EISA		29
+#define PCIMT_IRQ_SCSI		30
+
+#define PCIMT_IRQ_ETHERNET	(MIPS_CPU_IRQ_BASE+6)
+
+#if 0
+#define PCIMT_IRQ_TEMPERATURE	24
+#define PCIMT_IRQ_EISA_NMI	25
+#define PCIMT_IRQ_POWER_OFF	26
+#define PCIMT_IRQ_BUTTON	27
+#endif
+
+/*
+ * Base address for the mapped 16mb EISA bus segment.
+ */
+#define PCIMT_EISA_BASE		CKSEG1ADDR(0xb0000000)
+
+/* PCI EISA Interrupt acknowledge  */
+#define PCIMT_INT_ACKNOWLEDGE	CKSEG1ADDR(0xba000000)
+
+/*
+ *  SNI ID PROM
+ *
+ * SNI_IDPROM_MEMSIZE  Memsize in 16MB quantities
+ * SNI_IDPROM_BRDTYPE  Board Type
+ * SNI_IDPROM_CPUTYPE  CPU Type on RM400
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __SNI_END 0
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define __SNI_END 3
+#endif
+#define SNI_IDPROM_BASE        CKSEG1ADDR(0x1ff00000)
+#define SNI_IDPROM_MEMSIZE     (SNI_IDPROM_BASE + (0x28 ^ __SNI_END))
+#define SNI_IDPROM_BRDTYPE     (SNI_IDPROM_BASE + (0x29 ^ __SNI_END))
+#define SNI_IDPROM_CPUTYPE     (SNI_IDPROM_BASE + (0x30 ^ __SNI_END))
+
+#define SNI_IDPROM_SIZE	0x1000
+
+/* board specific init functions */
+extern void sni_a20r_init(void);
+extern void sni_pcit_init(void);
+extern void sni_rm200_init(void);
+extern void sni_pcimt_init(void);
+
+/* board specific irq init functions */
+extern void sni_a20r_irq_init(void);
+extern void sni_pcit_irq_init(void);
+extern void sni_pcit_cplus_irq_init(void);
+extern void sni_rm200_irq_init(void);
+extern void sni_pcimt_irq_init(void);
+
+/* timer inits */
+extern void sni_cpu_time_init(void);
+
+/* eisa init for RM200/400 */
+#ifdef CONFIG_EISA
+extern int sni_eisa_root_init(void);
+#else
+static inline int sni_eisa_root_init(void)
+{
+	return 0;
+}
+#endif
+
+/* common irq stuff */
+extern void (*sni_hwint)(void);
+extern struct irqaction sni_isa_irq;
+
+#endif /* __ASM_SNI_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
new file mode 100644
index 0000000..facc2d7
--- /dev/null
+++ b/arch/mips/include/asm/socket.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/*
+ * For setsockopt(2)
+ *
+ * This defines are ABI conformant as far as Linux supports these ...
+ */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001	/* Record debugging information.  */
+#define SO_REUSEADDR	0x0004	/* Allow reuse of local addresses.  */
+#define SO_KEEPALIVE	0x0008	/* Keep connections alive and send
+				   SIGPIPE when they die.  */
+#define SO_DONTROUTE	0x0010	/* Don't do local routing.  */
+#define SO_BROADCAST	0x0020	/* Allow transmission of
+				   broadcast messages.  */
+#define SO_LINGER	0x0080	/* Block on close of a reliable
+				   socket to transmit pending data.  */
+#define SO_OOBINLINE 0x0100	/* Receive out-of-band data in-band.  */
+#if 0
+To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
+#endif
+
+#define SO_TYPE		0x1008	/* Compatible name for SO_STYLE.  */
+#define SO_STYLE	SO_TYPE	/* Synonym */
+#define SO_ERROR	0x1007	/* get error status and clear */
+#define SO_SNDBUF	0x1001	/* Send buffer size. */
+#define SO_RCVBUF	0x1002	/* Receive buffer. */
+#define SO_SNDLOWAT	0x1003	/* send low-water mark */
+#define SO_RCVLOWAT	0x1004	/* receive low-water mark */
+#define SO_SNDTIMEO	0x1005	/* send timeout */
+#define SO_RCVTIMEO 	0x1006	/* receive timeout */
+#define SO_ACCEPTCONN	0x1009
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_BSDCOMPAT	14
+
+#define SO_PASSCRED	17
+#define SO_PEERCRED	18
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		30
+#define SO_SNDBUFFORCE		31
+#define SO_RCVBUFFORCE		33
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#ifdef __KERNEL__
+
+/** sock_type - Socket types
+ *
+ * Please notice that for binary compat reasons MIPS has to
+ * override the enum sock_type in include/linux/net.h, so
+ * we define ARCH_HAS_SOCKET_TYPES here.
+ *
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ */
+enum sock_type {
+	SOCK_DGRAM	= 1,
+	SOCK_STREAM	= 2,
+	SOCK_RAW	= 3,
+	SOCK_RDM	= 4,
+	SOCK_SEQPACKET	= 5,
+	SOCK_DCCP	= 6,
+	SOCK_PACKET	= 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ *  * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#define SOCK_NONBLOCK	O_NONBLOCK
+
+#define ARCH_HAS_SOCKET_TYPES 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mips/include/asm/sockios.h b/arch/mips/include/asm/sockios.h
new file mode 100644
index 0000000..ed1a5f7
--- /dev/null
+++ b/arch/mips/include/asm/sockios.h
@@ -0,0 +1,26 @@
+/*
+ * Socket-level I/O control calls.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
new file mode 100644
index 0000000..795ac6c
--- /dev/null
+++ b/arch/mips/include/asm/sparsemem.h
@@ -0,0 +1,14 @@
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       28
+#define MAX_PHYSMEM_BITS        35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
new file mode 100644
index 0000000..bb89701
--- /dev/null
+++ b/arch/mips/include/asm/spinlock.h
@@ -0,0 +1,376 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#include <asm/barrier.h>
+#include <asm/war.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+#define __raw_spin_is_locked(x)       ((x)->lock != 0)
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+	do { cpu_relax(); } while ((x)->lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_spin_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 li	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		: "=m" (lock->lock), "=&r" (tmp)
+		: "m" (lock->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_spin_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 2f					\n"
+		"	 li	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 2f					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	ll	%1, %2					\n"
+		"	bnez	%1, 2b					\n"
+		"	 li	%1, 1					\n"
+		"	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (lock->lock), "=&r" (tmp)
+		: "m" (lock->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+	"	.set	noreorder	# __raw_spin_unlock	\n"
+	"	sw	$0, %0					\n"
+	"	.set\treorder					\n"
+	: "=m" (lock->lock)
+	: "m" (lock->lock)
+	: "memory");
+}
+
+static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned int temp, res;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_spin_trylock	\n"
+		"1:	ll	%0, %3					\n"
+		"	ori	%2, %0, 1				\n"
+		"	sc	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	 nop						\n"
+		"	andi	%2, %0, 1				\n"
+		"	.set	reorder"
+		: "=&r" (temp), "=m" (lock->lock), "=&r" (res)
+		: "m" (lock->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_spin_trylock	\n"
+		"1:	ll	%0, %3					\n"
+		"	ori	%2, %0, 1				\n"
+		"	sc	%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	 andi	%2, %0, 1				\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder"
+		: "=&r" (temp), "=m" (lock->lock), "=&r" (res)
+		: "m" (lock->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+
+	return res == 0;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(rw)	((rw)->lock >= 0)
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 1b					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	ll	%1, %2					\n"
+		"	bltz	%1, 2b					\n"
+		"	 addu	%1, 1					\n"
+		"	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+}
+
+/* Note the use of sub, not subu which will make the kernel die with an
+   overflow exception if we ever try to unlock an rwlock that is already
+   unlocked or is being held by a writer.  */
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	smp_llsc_mb();
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"1:	ll	%1, %2		# __raw_read_unlock	\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_unlock	\n"
+		"1:	ll	%1, %2					\n"
+		"	sub	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 2f					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 1b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_lock	\n"
+		"1:	ll	%1, %2					\n"
+		"	bnez	%1, 2f					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 2f					\n"
+		"	 nop						\n"
+		"	.subsection 2					\n"
+		"2:	ll	%1, %2					\n"
+		"	bnez	%1, 2b					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	b	1b					\n"
+		"	 nop						\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	smp_llsc_mb();
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+	"				# __raw_write_unlock	\n"
+	"	sw	$0, %0					\n"
+	: "=m" (rw->lock)
+	: "m" (rw->lock)
+	: "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+	int ret;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	.set	reorder					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_read_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bltz	%1, 2f					\n"
+		"	 addu	%1, 1					\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 1b					\n"
+		"	 nop						\n"
+		"	.set	reorder					\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	return ret;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned int tmp;
+	int ret;
+
+	if (R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	 lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqzl	%1, 1b					\n"
+		"	 nop						\n"
+		__WEAK_LLSC_MB
+		"	li	%2, 1					\n"
+		"	.set	reorder					\n"
+		"2:							\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	} else {
+		__asm__ __volatile__(
+		"	.set	noreorder	# __raw_write_trylock	\n"
+		"	li	%2, 0					\n"
+		"1:	ll	%1, %3					\n"
+		"	bnez	%1, 2f					\n"
+		"	lui	%1, 0x8000				\n"
+		"	sc	%1, %0					\n"
+		"	beqz	%1, 3f					\n"
+		"	 li	%2, 1					\n"
+		"2:							\n"
+		__WEAK_LLSC_MB
+		"	.subsection 2					\n"
+		"3:	b	1b					\n"
+		"	 li	%2, 0					\n"
+		"	.previous					\n"
+		"	.set	reorder					\n"
+		: "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+		: "m" (rw->lock)
+		: "memory");
+	}
+
+	return ret;
+}
+
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
new file mode 100644
index 0000000..ce26c50
--- /dev/null
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
new file mode 100644
index 0000000..4c37c4e5
--- /dev/null
+++ b/arch/mips/include/asm/stackframe.h
@@ -0,0 +1,574 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_STACKFRAME_H
+#define _ASM_STACKFRAME_H
+
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#define STATMASK 0x3f
+#else
+#define STATMASK 0x1f
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+		.macro	SAVE_AT
+		.set	push
+		.set	noat
+		LONG_S	$1, PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	SAVE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		mflhxu	v1
+		LONG_S	v1, PT_LO(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_HI(sp)
+		mflhxu	v1
+		LONG_S	v1, PT_ACX(sp)
+#else
+		mfhi	v1
+		LONG_S	v1, PT_HI(sp)
+		mflo	v1
+		LONG_S	v1, PT_LO(sp)
+#endif
+#ifdef CONFIG_32BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	$10, PT_R10(sp)
+		LONG_S	$11, PT_R11(sp)
+		LONG_S	$12, PT_R12(sp)
+		LONG_S	$13, PT_R13(sp)
+		LONG_S	$14, PT_R14(sp)
+		LONG_S	$15, PT_R15(sp)
+		LONG_S	$24, PT_R24(sp)
+		.endm
+
+		.macro	SAVE_STATIC
+		LONG_S	$16, PT_R16(sp)
+		LONG_S	$17, PT_R17(sp)
+		LONG_S	$18, PT_R18(sp)
+		LONG_S	$19, PT_R19(sp)
+		LONG_S	$20, PT_R20(sp)
+		LONG_S	$21, PT_R21(sp)
+		LONG_S	$22, PT_R22(sp)
+		LONG_S	$23, PT_R23(sp)
+		LONG_S	$30, PT_R30(sp)
+		.endm
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_MT_SMTC
+#define PTEBASE_SHIFT	19	/* TCBIND */
+#else
+#define PTEBASE_SHIFT	23	/* CONTEXT */
+#endif
+		.macro	get_saved_sp	/* SMP variation */
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	k0, CP0_TCBIND
+#else
+		MFC0	k0, CP0_CONTEXT
+#endif
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, 16
+#endif
+		LONG_SRL	k0, PTEBASE_SHIFT
+		LONG_ADDU	k1, k0
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	\temp, CP0_TCBIND
+#else
+		MFC0	\temp, CP0_CONTEXT
+#endif
+		LONG_SRL	\temp, PTEBASE_SHIFT
+		LONG_S	\stackp, kernelsp(\temp)
+		.endm
+#else
+		.macro	get_saved_sp	/* Uniprocessor variation */
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+		lui	k1, %hi(kernelsp)
+#else
+		lui	k1, %highest(kernelsp)
+		daddiu	k1, %higher(kernelsp)
+		dsll	k1, k1, 16
+		daddiu	k1, %hi(kernelsp)
+		dsll	k1, k1, 16
+#endif
+		LONG_L	k1, %lo(kernelsp)(k1)
+		.endm
+
+		.macro	set_saved_sp stackp temp temp2
+		LONG_S	\stackp, kernelsp
+		.endm
+#endif
+
+		.macro	SAVE_SOME
+		.set	push
+		.set	noat
+		.set	reorder
+		mfc0	k0, CP0_STATUS
+		sll	k0, 3		/* extract cu0 bit */
+		.set	noreorder
+		bltz	k0, 8f
+		 move	k1, sp
+		.set	reorder
+		/* Called from user mode, new stack. */
+		get_saved_sp
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+8:		move	k0, sp
+		PTR_SUBU sp, k1, PT_SIZE
+#else
+		.set	at=k0
+8:		PTR_SUBU k1, PT_SIZE
+		.set	noat
+		move	k0, sp
+		move	sp, k1
+#endif
+		LONG_S	k0, PT_R29(sp)
+		LONG_S	$3, PT_R3(sp)
+		/*
+		 * You might think that you don't need to save $0,
+		 * but the FPU emulator and gdb remote debug stub
+		 * need it to operate correctly
+		 */
+		LONG_S	$0, PT_R0(sp)
+		mfc0	v1, CP0_STATUS
+		LONG_S	$2, PT_R2(sp)
+		LONG_S	v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * Ideally, these instructions would be shuffled in
+		 * to cover the pipeline delay.
+		 */
+		.set	mips32
+		mfc0	v1, CP0_TCSTATUS
+		.set	mips0
+		LONG_S	v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_S	$4, PT_R4(sp)
+		mfc0	v1, CP0_CAUSE
+		LONG_S	$5, PT_R5(sp)
+		LONG_S	v1, PT_CAUSE(sp)
+		LONG_S	$6, PT_R6(sp)
+		MFC0	v1, CP0_EPC
+		LONG_S	$7, PT_R7(sp)
+#ifdef CONFIG_64BIT
+		LONG_S	$8, PT_R8(sp)
+		LONG_S	$9, PT_R9(sp)
+#endif
+		LONG_S	v1, PT_EPC(sp)
+		LONG_S	$25, PT_R25(sp)
+		LONG_S	$28, PT_R28(sp)
+		LONG_S	$31, PT_R31(sp)
+		ori	$28, sp, _THREAD_MASK
+		xori	$28, _THREAD_MASK
+		.set	pop
+		.endm
+
+		.macro	SAVE_ALL
+		SAVE_SOME
+		SAVE_AT
+		SAVE_TEMP
+		SAVE_STATIC
+		.endm
+
+		.macro	RESTORE_AT
+		.set	push
+		.set	noat
+		LONG_L	$1,  PT_R1(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		LONG_L	$24, PT_ACX(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_HI(sp)
+		mtlhx	$24
+		LONG_L	$24, PT_LO(sp)
+		mtlhx	$24
+#else
+		LONG_L	$24, PT_LO(sp)
+		mtlo	$24
+		LONG_L	$24, PT_HI(sp)
+		mthi	$24
+#endif
+#ifdef CONFIG_32BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$10, PT_R10(sp)
+		LONG_L	$11, PT_R11(sp)
+		LONG_L	$12, PT_R12(sp)
+		LONG_L	$13, PT_R13(sp)
+		LONG_L	$14, PT_R14(sp)
+		LONG_L	$15, PT_R15(sp)
+		LONG_L	$24, PT_R24(sp)
+		.endm
+
+		.macro	RESTORE_STATIC
+		LONG_L	$16, PT_R16(sp)
+		LONG_L	$17, PT_R17(sp)
+		LONG_L	$18, PT_R18(sp)
+		LONG_L	$19, PT_R19(sp)
+		LONG_L	$20, PT_R20(sp)
+		LONG_L	$21, PT_R21(sp)
+		LONG_L	$22, PT_R22(sp)
+		LONG_L	$23, PT_R23(sp)
+		LONG_L	$30, PT_R30(sp)
+		.endm
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+		mfc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		.set	push
+		.set	noreorder
+		LONG_L	k0, PT_EPC(sp)
+		LONG_L	sp, PT_R29(sp)
+		jr	k0
+		 rfe
+		.set	pop
+		.endm
+
+#else
+		.macro	RESTORE_SOME
+		.set	push
+		.set	reorder
+		.set	noat
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips32r2
+		/*
+		 * We need to make sure the read-modify-write
+		 * of Status below isn't perturbed by an interrupt
+		 * or cross-TC access, so we need to do at least a DMT,
+		 * protected by an interrupt-inhibit. But setting IXMT
+		 * also creates a few-cycle window where an IPI could
+		 * be queued and not be detected before potentially
+		 * returning to a WAIT or user-mode loop. It must be
+		 * replayed.
+		 *
+		 * We're in the middle of a context switch, and
+		 * we can't dispatch it directly without trashing
+		 * some registers, so we'll try to detect this unlikely
+		 * case and program a software interrupt in the VPE,
+		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * the handling of that case, we're doing a DVPE instead
+		 * of just a DMT here to protect against other threads.
+		 * This is a lot of cruft to cover a tiny window.
+		 * If you can find a better design, implement it!
+		 *
+		 */
+		mfc0	v0, CP0_TCSTATUS
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DVPE	5				# dvpe a1
+		jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	a0, CP0_STATUS
+		ori	a0, STATMASK
+		xori	a0, STATMASK
+		mtc0	a0, CP0_STATUS
+		li	v1, 0xff00
+		and	a0, v1
+		LONG_L	v0, PT_STATUS(sp)
+		nor	v1, $0, v1
+		and	v0, v1
+		or	v0, a0
+		mtc0	v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+		LONG_L	v1, PT_TCSTATUS(sp)
+		_ehb
+		mfc0	a0, CP0_TCSTATUS
+		andi	v1, TCSTATUS_IXMT
+		bnez	v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious.  We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+		mfc0	v0, CP0_TCCONTEXT
+		la	a2, IPIQ
+		srl	v0, v0, 16
+		addu	a2, a2, v0
+		LONG_L	v0, 0(a2)
+		beqz	v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+		mfc0	v0, CP0_CAUSE
+		ori	v0, v0, C_SW1
+		mtc0	v0, CP0_CAUSE
+0:
+		/*
+		 * This test should really never branch but
+		 * let's be prudent here.  Having atomized
+		 * the shared register modifications, we can
+		 * now EVPE, and must do so before interrupts
+		 * are potentially re-enabled.
+		 */
+		andi	a1, a1, MVPCONTROL_EVP
+		beqz	a1, 1f
+		evpe
+1:
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	a0, a0, TCSTATUS_IXMT
+		or	a0, a0, v1
+		mtc0	a0, CP0_TCSTATUS
+		_ehb
+
+		.set	mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		LONG_L	v1, PT_EPC(sp)
+		MTC0	v1, CP0_EPC
+		LONG_L	$31, PT_R31(sp)
+		LONG_L	$28, PT_R28(sp)
+		LONG_L	$25, PT_R25(sp)
+#ifdef CONFIG_64BIT
+		LONG_L	$8, PT_R8(sp)
+		LONG_L	$9, PT_R9(sp)
+#endif
+		LONG_L	$7,  PT_R7(sp)
+		LONG_L	$6,  PT_R6(sp)
+		LONG_L	$5,  PT_R5(sp)
+		LONG_L	$4,  PT_R4(sp)
+		LONG_L	$3,  PT_R3(sp)
+		LONG_L	$2,  PT_R2(sp)
+		.set	pop
+		.endm
+
+		.macro	RESTORE_SP_AND_RET
+		LONG_L	sp, PT_R29(sp)
+		.set	mips3
+		eret
+		.set	mips0
+		.endm
+
+#endif
+
+		.macro	RESTORE_SP
+		LONG_L	sp, PT_R29(sp)
+		.endm
+
+		.macro	RESTORE_ALL
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP
+		.endm
+
+		.macro	RESTORE_ALL_AND_RET
+		RESTORE_TEMP
+		RESTORE_STATIC
+		RESTORE_AT
+		RESTORE_SOME
+		RESTORE_SP_AND_RET
+		.endm
+
+/*
+ * Move to kernel mode and disable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and disable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU, leave IXMT */
+		xori	t0, 0x00001800
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL | ST0_ERL
+		xori	t0, ST0_EXL | ST0_ERL
+		mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+/*
+ * Move to kernel mode and enable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | STATMASK
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and enable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		_ehb
+		mfc0	t0, CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0, t1
+		/* Clear TKSU *and* IXMT */
+		xori	t0, 0x00001c00
+		mtc0	t0, CP0_TCSTATUS
+		_ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL
+		xori	t0, ST0_EXL
+		mtc0	t0, CP0_STATUS
+		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_enable_hazard
+		.endm
+
+/*
+ * Just move to kernel mode and leave interrupts as they are.  Note
+ * for the R3000 this means copying the previous enable from IEp.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+		.macro	KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * This gets baroque in SMTC.  We want to
+		 * protect the non-atomic clearing of EXL
+		 * with DMT/EMT, but we don't want to take
+		 * an interrupt while DMT is still in effect.
+		 */
+
+		/* KMODE gets invoked from both reorder and noreorder code */
+		.set	push
+		.set	mips32r2
+		.set	noreorder
+		mfc0	v0, CP0_TCSTATUS
+		andi	v1, v0, TCSTATUS_IXMT
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		_ehb
+		DMT	2				# dmt	v0
+		/*
+		 * We don't know a priori if ra is "live"
+		 */
+		move	t0, ra
+		jal	mips_ihb
+		nop	/* delay slot */
+		move	ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
+		mfc0	t0, CP0_STATUS
+		li	t1, ST0_CU0 | (STATMASK & ~1)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+		andi	t2, t0, ST0_IEP
+		srl	t2, 2
+		or	t0, t2
+#endif
+		or	t0, t1
+		xori	t0, STATMASK & ~1
+		mtc0	t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+		_ehb
+		andi	v0, v0, VPECONTROL_TE
+		beqz	v0, 2f
+		nop	/* delay slot */
+		emt
+2:
+		mfc0	v0, CP0_TCSTATUS
+		/* Clear IXMT, then OR in previous value */
+		ori	v0, TCSTATUS_IXMT
+		xori	v0, TCSTATUS_IXMT
+		or	v0, v1, v0
+		mtc0	v0, CP0_TCSTATUS
+		/*
+		 * irq_disable_hazard below should expand to EHB
+		 * on 24K/34K CPUS
+		 */
+		.set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
+		irq_disable_hazard
+		.endm
+
+#endif /* _ASM_STACKFRAME_H */
diff --git a/arch/mips/include/asm/stacktrace.h b/arch/mips/include/asm/stacktrace.h
new file mode 100644
index 0000000..0bf8281
--- /dev/null
+++ b/arch/mips/include/asm/stacktrace.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_STACKTRACE_H
+#define _ASM_STACKTRACE_H
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_KALLSYMS
+extern int raw_show_trace;
+extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+				  unsigned long pc, unsigned long *ra);
+#else
+#define raw_show_trace 1
+static inline unsigned long unwind_stack(struct task_struct *task,
+	unsigned long *sp, unsigned long pc, unsigned long *ra)
+{
+	return 0;
+}
+#endif
+
+static __always_inline void prepare_frametrace(struct pt_regs *regs)
+{
+#ifndef CONFIG_KALLSYMS
+	/*
+	 * Remove any garbage that may be in regs (specially func
+	 * addresses) to avoid show_raw_backtrace() to report them
+	 */
+	memset(regs, 0, sizeof(*regs));
+#endif
+	__asm__ __volatile__(
+		".set push\n\t"
+		".set noat\n\t"
+#ifdef CONFIG_64BIT
+		"1: dla $1, 1b\n\t"
+		"sd $1, %0\n\t"
+		"sd $29, %1\n\t"
+		"sd $31, %2\n\t"
+#else
+		"1: la $1, 1b\n\t"
+		"sw $1, %0\n\t"
+		"sw $29, %1\n\t"
+		"sw $31, %2\n\t"
+#endif
+		".set pop\n\t"
+		: "=m" (regs->cp0_epc),
+		"=m" (regs->regs[29]), "=m" (regs->regs[31])
+		: : "memory");
+}
+
+#endif /* _ASM_STACKTRACE_H */
diff --git a/arch/mips/include/asm/stat.h b/arch/mips/include/asm/stat.h
new file mode 100644
index 0000000..6e00f75
--- /dev/null
+++ b/arch/mips/include/asm/stat.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+#include <linux/types.h>
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+struct stat {
+	unsigned	st_dev;
+	long		st_pad1[3];		/* Reserved for network id */
+	ino_t		st_ino;
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned 	st_rdev;
+	long		st_pad2[2];
+	off_t		st_size;
+	long		st_pad3;
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	long		st_atime_nsec;
+	time_t		st_mtime;
+	long		st_mtime_nsec;
+	time_t		st_ctime;
+	long		st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	long		st_pad4[14];
+};
+
+/*
+ * This matches struct stat64 in glibc2.1, hence the absolutely insane
+ * amounts of padding around dev_t's.  The memory layout is the same as of
+ * struct stat of the 64-bit kernel.
+ */
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_pad0[3];	/* Reserved for st_dev expansion  */
+
+	unsigned long long	st_ino;
+
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+
+	uid_t		st_uid;
+	gid_t		st_gid;
+
+	unsigned long	st_rdev;
+	unsigned long	st_pad1[3];	/* Reserved for st_rdev expansion  */
+
+	long long	st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	time_t		st_atime;
+	unsigned long	st_atime_nsec;	/* Reserved for st_atime expansion  */
+
+	time_t		st_mtime;
+	unsigned long	st_mtime_nsec;	/* Reserved for st_mtime expansion  */
+
+	time_t		st_ctime;
+	unsigned long	st_ctime_nsec;	/* Reserved for st_ctime expansion  */
+
+	unsigned long	st_blksize;
+	unsigned long	st_pad2;
+
+	long long	st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/* The memory layout is the same as of struct stat64 of the 32-bit kernel.  */
+struct stat {
+	unsigned int		st_dev;
+	unsigned int		st_pad0[3]; /* Reserved for st_dev expansion */
+
+	unsigned long		st_ino;
+
+	mode_t			st_mode;
+	nlink_t			st_nlink;
+
+	uid_t			st_uid;
+	gid_t			st_gid;
+
+	unsigned int		st_rdev;
+	unsigned int		st_pad1[3]; /* Reserved for st_rdev expansion */
+
+	off_t			st_size;
+
+	/*
+	 * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+	 * but we don't have it under Linux.
+	 */
+	unsigned int		st_atime;
+	unsigned int		st_atime_nsec;
+
+	unsigned int		st_mtime;
+	unsigned int		st_mtime_nsec;
+
+	unsigned int		st_ctime;
+	unsigned int		st_ctime_nsec;
+
+	unsigned int		st_blksize;
+	unsigned int		st_pad2;
+
+	unsigned long		st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h
new file mode 100644
index 0000000..c3ddf97
--- /dev/null
+++ b/arch/mips/include/asm/statfs.h
@@ -0,0 +1,96 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <linux/posix_types.h>
+#include <asm/sgidefs.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t        fsid_t;
+
+#endif
+
+struct statfs {
+	long		f_type;
+#define f_fstyp f_type
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+/*
+ * Unlike the traditional version the LFAPI version has none of the ABI junk
+ */
+struct statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+struct statfs64 {			/* Same as struct statfs */
+	long		f_type;
+	long		f_bsize;
+	long		f_frsize;	/* Fragment size - unsupported */
+	long		f_blocks;
+	long		f_bfree;
+	long		f_files;
+	long		f_ffree;
+	long		f_bavail;
+
+	/* Linux specials */
+	__kernel_fsid_t	f_fsid;
+	long		f_namelen;
+	long		f_spare[6];
+};
+
+struct compat_statfs64 {
+	__u32	f_type;
+	__u32	f_bsize;
+	__u32	f_frsize;	/* Fragment size - unsupported */
+	__u32	__pad;
+	__u64	f_blocks;
+	__u64	f_bfree;
+	__u64	f_files;
+	__u64	f_ffree;
+	__u64	f_bavail;
+	__kernel_fsid_t f_fsid;
+	__u32	f_namelen;
+	__u32	f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#endif /* _ASM_STATFS_H */
diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h
new file mode 100644
index 0000000..436e3ad
--- /dev/null
+++ b/arch/mips/include/asm/string.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle
+ * Copyright (c) 2000 by Silicon Graphics, Inc.
+ * Copyright (c) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+
+/*
+ * Most of the inline functions are rather naive implementations so I just
+ * didn't bother updating them for 64-bit ...
+ */
+#ifdef CONFIG_32BIT
+
+#ifndef IN_STRING_C
+
+#define __HAVE_ARCH_STRCPY
+static __inline__ char *strcpy(char *__dest, __const__ char *__src)
+{
+  char *__xdest = __dest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%1,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"bnez\t$1,1b\n\t"
+	"addiu\t%0,1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__dest), "=r" (__src)
+        : "0" (__dest), "1" (__src)
+	: "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n)
+{
+  char *__xdest = __dest;
+
+  if (__n == 0)
+    return __xdest;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"sb\t$1,(%0)\n\t"
+	"beqz\t$1,2f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+        : "=r" (__dest), "=r" (__src), "=r" (__n)
+        : "0" (__dest), "1" (__src), "2" (__n)
+        : "memory");
+
+  return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct)
+{
+  int __res;
+
+  __asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n\t"
+	"lbu\t%2,(%0)\n"
+	"1:\tlbu\t$1,(%1)\n\t"
+	"addiu\t%0,1\n\t"
+	"bne\t$1,%2,2f\n\t"
+	"addiu\t%1,1\n\t"
+	"bnez\t%2,1b\n\t"
+	"lbu\t%2,(%0)\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%2,$1\n"
+	"2:\tsubu\t%2,$1\n"
+	"3:\t.set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__res)
+	: "0" (__cs), "1" (__ct));
+
+  return __res;
+}
+
+#endif /* !defined(IN_STRING_C) */
+
+#define __HAVE_ARCH_STRNCMP
+static __inline__ int
+strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count)
+{
+	int __res;
+
+	__asm__ __volatile__(
+	".set\tnoreorder\n\t"
+	".set\tnoat\n"
+	"1:\tlbu\t%3,(%0)\n\t"
+	"beqz\t%2,2f\n\t"
+	"lbu\t$1,(%1)\n\t"
+	"subu\t%2,1\n\t"
+	"bne\t$1,%3,3f\n\t"
+	"addiu\t%0,1\n\t"
+	"bnez\t%3,1b\n\t"
+	"addiu\t%1,1\n"
+	"2:\n\t"
+#if defined(CONFIG_CPU_R3000)
+	"nop\n\t"
+#endif
+	"move\t%3,$1\n"
+	"3:\tsubu\t%3,$1\n\t"
+	".set\tat\n\t"
+	".set\treorder"
+	: "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res)
+	: "0" (__cs), "1" (__ct), "2" (__count));
+
+	return __res;
+}
+#endif /* CONFIG_32BIT */
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#endif /* _ASM_STRING_H */
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
new file mode 100644
index 0000000..2562f8f
--- /dev/null
+++ b/arch/mips/include/asm/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SUSPEND_H
+#define __ASM_SUSPEND_H
+
+/* Somewhen...  Maybe :-)  */
+
+#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/include/asm/sysmips.h b/arch/mips/include/asm/sysmips.h
new file mode 100644
index 0000000..4f47b7d
--- /dev/null
+++ b/arch/mips/include/asm/sysmips.h
@@ -0,0 +1,25 @@
+/*
+ * Definitions for the MIPS sysmips(2) call
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SYSMIPS_H
+#define _ASM_SYSMIPS_H
+
+/*
+ * Commands for the sysmips(2) call
+ *
+ * sysmips(2) is deprecated - though some existing software uses it.
+ * We only support the following commands.
+ */
+#define SETNAME                    1	/* set hostname                  */
+#define FLUSH_CACHE		   3	/* writeback and invalidate caches */
+#define MIPS_FIXADE                7	/* control address error fixing  */
+#define MIPS_RDNVRAM              10	/* read NVRAM */
+#define MIPS_ATOMIC_SET		2001	/* atomically set variable       */
+
+#endif /* _ASM_SYSMIPS_H */
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
new file mode 100644
index 0000000..a944eda
--- /dev/null
+++ b/arch/mips/include/asm/system.h
@@ -0,0 +1,220 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#include <asm/addrspace.h>
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+#include <asm/cpu-features.h>
+#include <asm/dsp.h>
+#include <asm/war.h>
+
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ */
+extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+
+struct task_struct;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+/*
+ * Handle the scheduler resume end of FPU affinity management.  We do this
+ * inline to try to keep the overhead down. If we have been forced to run on
+ * a "CPU" with an FPU because of a previous high level of FP computation,
+ * but did not actually use the FPU during the most recent time-slice (CU1
+ * isn't set), we undo the restriction on cpus_allowed.
+ *
+ * We're not calling set_cpus_allowed() here, because we have no need to
+ * force prompt migration - we're already switching the current CPU to a
+ * different thread.
+ */
+
+#define __mips_mt_fpaff_switch_to(prev)					\
+do {									\
+	struct thread_info *__prev_ti = task_thread_info(prev);		\
+									\
+	if (cpu_has_fpu &&						\
+	    test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) &&		\
+	    (!(KSTK_STATUS(prev) & ST0_CU1))) {				\
+		clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND);		\
+		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
+	}								\
+	next->thread.emulated_fp = 0;					\
+} while(0)
+
+#else
+#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
+#endif
+
+#define switch_to(prev, next, last)					\
+do {									\
+	__mips_mt_fpaff_switch_to(prev);				\
+	if (cpu_has_dsp)						\
+		__save_dsp(prev);					\
+	(last) = resume(prev, next, task_thread_info(next));		\
+} while (0)
+
+#define finish_arch_switch(prev)					\
+do {									\
+	if (cpu_has_dsp)						\
+		__restore_dsp(current);					\
+	if (cpu_has_userlocal)						\
+		write_c0_userlocal(current_thread_info()->tp_value);	\
+} while (0)
+
+static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
+{
+	__u32 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	.set	mips0					\n"
+		"	move	%2, %z4					\n"
+		"	.set	mips3					\n"
+		"	sc	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	ll	%0, %3			# xchg_u32	\n"
+		"	.set	mips0					\n"
+		"	move	%2, %z4					\n"
+		"	.set	mips3					\n"
+		"	sc	%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		raw_local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	smp_llsc_mb();
+
+	return retval;
+}
+
+#ifdef CONFIG_64BIT
+static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
+{
+	__u64 retval;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqzl	%2, 1b					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		unsigned long dummy;
+
+		__asm__ __volatile__(
+		"	.set	mips3					\n"
+		"1:	lld	%0, %3			# xchg_u64	\n"
+		"	move	%2, %z4					\n"
+		"	scd	%2, %1					\n"
+		"	beqz	%2, 2f					\n"
+		"	.subsection 2					\n"
+		"2:	b	1b					\n"
+		"	.previous					\n"
+		"	.set	mips0					\n"
+		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
+		: "R" (*m), "Jr" (val)
+		: "memory");
+	} else {
+		unsigned long flags;
+
+		raw_local_irq_save(flags);
+		retval = *m;
+		*m = val;
+		raw_local_irq_restore(flags);	/* implies memory barrier  */
+	}
+
+	smp_llsc_mb();
+
+	return retval;
+}
+#else
+extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val);
+#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+	case 8:
+		return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+extern void set_handler(unsigned long offset, void *addr, unsigned long len);
+extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
+
+typedef void (*vi_handler_t)(void);
+extern void *set_vi_handler(int n, vi_handler_t addr);
+
+extern void *set_except_vector(int n, void *addr);
+extern unsigned long ebase;
+extern void per_cpu_trap_init(void);
+
+/*
+ * See include/asm-ia64/system.h; prevents deadlock on SMP
+ * systems.
+ */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h
new file mode 100644
index 0000000..c83c684
--- /dev/null
+++ b/arch/mips/include/asm/termbits.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+/*
+ * The ABI says nothing about NCC but seems to use NCCS as
+ * replacement for it in struct termio
+ */
+#define NCCS	23
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VQUIT		 1		/* Quit character [ISIG].  */
+#define VERASE		 2		/* Erase character [ICANON].  */
+#define VKILL		 3		/* Kill-line character [ICANON].  */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
+#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VSWTC		 7		/* ??? */
+#define VSWTCH		VSWTC
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
+#define VSUSP		10		/* Suspend character [ISIG].  */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#endif
+#define VREPRINT	12		/* Reprint-line character [ICANON].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VWERASE		14		/* Word-erase character [ICANON].  */
+#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
+#define VEOF		16		/* End-of-file character [ICANON].  */
+#define VEOL		17		/* End-of-line character [ICANON].  */
+
+/* c_iflag bits */
+#define IGNBRK	0000001		/* Ignore break condition.  */
+#define BRKINT	0000002		/* Signal interrupt on break.  */
+#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
+#define PARMRK	0000010		/* Mark parity and framing errors.  */
+#define INPCK	0000020		/* Enable input parity check.  */
+#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
+#define INLCR	0000100		/* Map NL to CR on input.  */
+#define IGNCR	0000200		/* Ignore CR.  */
+#define ICRNL	0000400		/* Map CR to NL on input.  */
+#define IUCLC	0001000		/* Map upper case to lower case on input.  */
+#define IXON	0002000		/* Enable start/stop output control.  */
+#define IXANY	0004000		/* Any character will restart after stop.  */
+#define IXOFF	0010000		/* Enable start/stop input control.  */
+#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#define IUTF8	0040000		/* Input is UTF-8 */
+
+/* c_oflag bits */
+#define OPOST	0000001		/* Perform output processing.  */
+#define OLCUC	0000002		/* Map lower case to upper case on output.  */
+#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+/*
+#define PAGEOUT ???
+#define WRAP    ???
+ */
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060		/* Number of bits per byte (mask).  */
+#define   CS5	0000000		/* 5 bits per byte.  */
+#define   CS6	0000020		/* 6 bits per byte.  */
+#define   CS7	0000040		/* 7 bits per byte.  */
+#define   CS8	0000060		/* 8 bits per byte.  */
+#define CSTOPB	0000100		/* Two stop bits instead of one.  */
+#define CREAD	0000200		/* Enable receiver.  */
+#define PARENB	0000400		/* Parity enable.  */
+#define PARODD	0001000		/* Odd parity instead of even.  */
+#define HUPCL	0002000		/* Hang up on last close.  */
+#define CLOCAL	0004000		/* Ignore modem status lines.  */
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR    010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001		/* Enable signals.  */
+#define ICANON	0000002		/* Do erase and kill processing.  */
+#define XCASE	0000004
+#define ECHO	0000010		/* Enable echo.  */
+#define ECHOE	0000020		/* Visual erase for ERASE.  */
+#define ECHOK	0000040		/* Echo NL after KILL.  */
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define NOFLSH	0000200		/* Disable flush after interrupt.  */
+#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
+#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOKE	0004000		/* Visual erase for KILL.  */
+#define FLUSHO	0020000
+#define PENDIN	0040000		/* Retype pending input (state).  */
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
+#define ITOSTOP	TOSTOP
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0	/* Suspend output.  */
+#define	TCOON		1	/* Restart suspended output.  */
+#define	TCIOFF		2	/* Send a STOP character.  */
+#define	TCION		3	/* Send a START character.  */
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define	TCIOFLUSH	2	/* Discard all pending data.  */
+
+/* tcsetattr uses these */
+#define	TCSANOW		TCSETS	/* Change immediately.  */
+#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
+#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h
new file mode 100644
index 0000000..a275661
--- /dev/null
+++ b/arch/mips/include/asm/termios.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	int	sg_flags;	/* SGI special - int, not short */
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+        char    t_suspc;        /* stop process signal */
+        char    t_dsuspc;       /* delayed stop process signal */
+        char    t_rprntc;       /* reprint line */
+        char    t_flushc;       /* flush output (toggles) */
+        char    t_werasc;       /* word erase */
+        char    t_lnextc;       /* literal next character */
+};
+
+/* TIOCGSIZE, TIOCSSIZE not defined yet.  Only needed for SunOS source
+   compatibility anyway ... */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC	8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	char c_line;			/* line discipline */
+	unsigned char c_cc[NCCS];	/* control characters */
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ *	intr=^C		quit=^\		erase=del	kill=^U
+ *	vmin=\1		vtime=\0	eol2=\0		swtc=\0
+ *	start=^Q	stop=^S		susp=^Z		vdsusp=
+ *	reprint=^R	discard=^U	werase=^W	lnext=^V
+ *	eof=^D		eol=\0
+ */
+#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001		/* line enable */
+#define TIOCM_DTR	0x002		/* data terminal ready */
+#define TIOCM_RTS	0x004		/* request to send */
+#define TIOCM_ST	0x010		/* secondary transmit */
+#define TIOCM_SR	0x020		/* secondary receive */
+#define TIOCM_CTS	0x040		/* clear to send */
+#define TIOCM_CAR	0x100		/* carrier detect */
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RNG	0x200		/* ring */
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_DSR	0x400		/* data set ready */
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line, &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
new file mode 100644
index 0000000..bb30606
--- /dev/null
+++ b/arch/mips/include/asm/thread_info.h
@@ -0,0 +1,151 @@
+/* thread_info.h: MIPS low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		tp_value;	/* thread pointer */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+						   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block	restart_block;
+	struct pt_regs		*regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= _TIF_FIXADE,		\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$28");
+#define current_thread_info()  __current_thread_info
+
+/* thread information allocation */
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
+#define THREAD_SIZE_ORDER (1)
+#endif
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT)
+#define THREAD_SIZE_ORDER (2)
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define THREAD_SIZE_ORDER (1)
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK (THREAD_SIZE - 1UL)
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = kzalloc(THREAD_SIZE, GFP_KERNEL);			\
+								\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
+#define TIF_SECCOMP		4	/* secure computing */
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19
+#define TIF_FIXADE		20	/* Fix address errors in software */
+#define TIF_LOGADE		21	/* Log address errors to syslog */
+#define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
+#define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
+#define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
+#define TIF_SYSCALL_TRACE	31	/* syscall trace active */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_FIXADE		(1<<TIF_FIXADE)
+#define _TIF_LOGADE		(1<<TIF_LOGADE)
+#define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
+#define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(0x8000ffff & ~_TIF_SECCOMP)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
new file mode 100644
index 0000000..d3bd5c5
--- /dev/null
+++ b/arch/mips/include/asm/time.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2001, 2002, MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (c) 2003  Maciej W. Rozycki
+ *
+ * include/asm-mips/time.h
+ *     header file for the new style time.c file and time services.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_TIME_H
+#define _ASM_TIME_H
+
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+
+extern spinlock_t rtc_lock;
+
+/*
+ * RTC ops.  By default, they point to weak no-op RTC functions.
+ *	rtc_mips_set_time - reverse the above translation and set time to RTC.
+ *	rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need
+ *			to be set.  Used by RTC sync-up.
+ */
+extern int rtc_mips_set_time(unsigned long);
+extern int rtc_mips_set_mmss(unsigned long);
+
+/*
+ * board specific routines required by time_init().
+ */
+extern void plat_time_init(void);
+
+/*
+ * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
+ * counter as a timer interrupt source.
+ */
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * The performance counter IRQ on MIPS is a close relative to the timer IRQ
+ * so it lives here.
+ */
+extern int (*perf_irq)(void);
+
+/*
+ * Initialize the calling CPU's compare interrupt as clockevent device
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int mips_clockevent_init(void);
+extern unsigned int __weak get_c0_compare_int(void);
+#else
+static inline int mips_clockevent_init(void)
+{
+	return -ENXIO;
+}
+#endif
+
+/*
+ * Initialize the count register as a clocksource
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int init_mips_clocksource(void);
+#else
+static inline int init_mips_clocksource(void)
+{
+	return 0;
+}
+#endif
+
+extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
+extern void clockevent_set_clock(struct clock_event_device *cd,
+		unsigned int clock);
+
+#endif /* _ASM_TIME_H */
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
new file mode 100644
index 0000000..6529704
--- /dev/null
+++ b/arch/mips/include/asm/timex.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#ifdef __KERNEL__
+
+#include <asm/mipsregs.h>
+
+/*
+ * This is the clock rate of the i8253 PIT.  A MIPS system may not have
+ * a PIT by the symbol is used all over the kernel including some APIs.
+ * So keeping it defined to the number for the PIT is the only sane thing
+ * for now.
+ */
+#define CLOCK_TICK_RATE 1193182
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity.
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ *
+ * We know that all SMP capable CPUs have cycle counters.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /*  _ASM_TIMEX_H */
diff --git a/arch/mips/include/asm/titan_dep.h b/arch/mips/include/asm/titan_dep.h
new file mode 100644
index 0000000..fee1908
--- /dev/null
+++ b/arch/mips/include/asm/titan_dep.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Board specific definititions for the PMC-Sierra Yosemite
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __TITAN_DEP_H__
+#define __TITAN_DEP_H__
+
+#include <asm/addrspace.h>              /* for KSEG1ADDR() */
+#include <asm/byteorder.h>              /* for cpu_to_le32() */
+
+#define TITAN_READ(ofs)							\
+	(*(volatile u32 *)(ocd_base+(ofs)))
+#define TITAN_READ_16(ofs)						\
+	(*(volatile u16 *)(ocd_base+(ofs)))
+#define TITAN_READ_8(ofs)						\
+	(*(volatile u8 *)(ocd_base+(ofs)))
+
+#define TITAN_WRITE(ofs, data)						\
+	do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_16(ofs, data)					\
+	do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_8(ofs, data)					\
+	do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0)
+
+/*
+ * PCI specific defines
+ */
+#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
+#define	TITAN_PCI_0_CONFIG_DATA		0x784
+
+/*
+ * HT specific defines
+ */
+#define RM9000x2_HTLINK_REG		0xbb000644
+#define RM9000x2_BASE_ADDR		0xbb000000
+
+#define OCD_BASE			0xfb000000UL
+#define OCD_SIZE			0x3000UL
+
+extern unsigned long ocd_base;
+
+/*
+ * OCD Registers
+ */
+#define RM9000x2_OCD_LKB5		0x0128		/* Ethernet */
+#define RM9000x2_OCD_LKM5		0x012c
+
+#define RM9000x2_OCD_LKB7		0x0138		/* HT Region 0 */
+#define RM9000x2_OCD_LKM7		0x013c
+#define RM9000x2_OCD_LKB8		0x0140		/* HT Region 1 */
+#define RM9000x2_OCD_LKM8		0x0144
+
+#define RM9000x2_OCD_LKB9		0x0148		/* Local Bus */
+#define RM9000x2_OCD_LKM9		0x014c
+#define RM9000x2_OCD_LKB10		0x0150
+#define RM9000x2_OCD_LKM10		0x0154
+#define RM9000x2_OCD_LKB11		0x0158
+#define RM9000x2_OCD_LKM11		0x015c
+#define RM9000x2_OCD_LKB12		0x0160
+#define RM9000x2_OCD_LKM12		0x0164
+
+#define RM9000x2_OCD_LKB13		0x0168		/* Scratch RAM */
+#define RM9000x2_OCD_LKM13		0x016c
+
+#define RM9000x2_OCD_LPD0		0x0200		/* Local Bus */
+#define RM9000x2_OCD_LPD1		0x0210
+#define RM9000x2_OCD_LPD2		0x0220
+#define RM9000x2_OCD_LPD3		0x0230
+
+#define RM9000x2_OCD_HTDVID		0x0600	/* HT Device Header */
+#define RM9000x2_OCD_HTSC		0x0604
+#define RM9000x2_OCD_HTCCR		0x0608
+#define RM9000x2_OCD_HTBHL		0x060c
+#define RM9000x2_OCD_HTBAR0		0x0610
+#define RM9000x2_OCD_HTBAR1		0x0614
+#define RM9000x2_OCD_HTBAR2		0x0618
+#define RM9000x2_OCD_HTBAR3		0x061c
+#define RM9000x2_OCD_HTBAR4		0x0620
+#define RM9000x2_OCD_HTBAR5		0x0624
+#define RM9000x2_OCD_HTCBCPT		0x0628
+#define RM9000x2_OCD_HTSDVID		0x062c
+#define RM9000x2_OCD_HTXRA		0x0630
+#define RM9000x2_OCD_HTCAP1		0x0634
+#define RM9000x2_OCD_HTIL		0x063c
+
+#define RM9000x2_OCD_HTLCC		0x0640	/* HT Capability Block */
+#define RM9000x2_OCD_HTLINK		0x0644
+#define RM9000x2_OCD_HTFQREV		0x0648
+
+#define RM9000x2_OCD_HTERCTL		0x0668	/* HT Controller */
+#define RM9000x2_OCD_HTRXDB		0x066c
+#define RM9000x2_OCD_HTIMPED		0x0670
+#define RM9000x2_OCD_HTSWIMP		0x0674
+#define RM9000x2_OCD_HTCAL		0x0678
+
+#define RM9000x2_OCD_HTBAA30		0x0680
+#define RM9000x2_OCD_HTBAA54		0x0684
+#define RM9000x2_OCD_HTMASK0		0x0688
+#define RM9000x2_OCD_HTMASK1		0x068c
+#define RM9000x2_OCD_HTMASK2		0x0690
+#define RM9000x2_OCD_HTMASK3		0x0694
+#define RM9000x2_OCD_HTMASK4		0x0698
+#define RM9000x2_OCD_HTMASK5		0x069c
+
+#define RM9000x2_OCD_HTIFCTL		0x06a0
+#define RM9000x2_OCD_HTPLL		0x06a4
+
+#define RM9000x2_OCD_HTSRI		0x06b0
+#define RM9000x2_OCD_HTRXNUM		0x06b4
+#define RM9000x2_OCD_HTTXNUM		0x06b8
+
+#define RM9000x2_OCD_HTTXCNT		0x06c8
+
+#define RM9000x2_OCD_HTERROR		0x06d8
+#define RM9000x2_OCD_HTRCRCE		0x06dc
+#define RM9000x2_OCD_HTEOI		0x06e0
+
+#define RM9000x2_OCD_CRCR		0x06f0
+
+#define RM9000x2_OCD_HTCFGA		0x06f8
+#define RM9000x2_OCD_HTCFGD		0x06fc
+
+#define RM9000x2_OCD_INTMSG		0x0a00
+
+#define RM9000x2_OCD_INTPIN0		0x0a40
+#define RM9000x2_OCD_INTPIN1		0x0a44
+#define RM9000x2_OCD_INTPIN2		0x0a48
+#define RM9000x2_OCD_INTPIN3		0x0a4c
+#define RM9000x2_OCD_INTPIN4		0x0a50
+#define RM9000x2_OCD_INTPIN5		0x0a54
+#define RM9000x2_OCD_INTPIN6		0x0a58
+#define RM9000x2_OCD_INTPIN7		0x0a5c
+#define RM9000x2_OCD_SEM		0x0a60
+#define RM9000x2_OCD_SEMSET		0x0a64
+#define RM9000x2_OCD_SEMCLR		0x0a68
+
+#define RM9000x2_OCD_TKT		0x0a70
+#define RM9000x2_OCD_TKTINC		0x0a74
+
+#define RM9000x2_OCD_NMICONFIG		0x0ac0		/* Interrupts */
+#define RM9000x2_OCD_INTP0PRI		0x1a80
+#define RM9000x2_OCD_INTP1PRI		0x1a80
+#define RM9000x2_OCD_INTP0STATUS0	0x1b00
+#define RM9000x2_OCD_INTP0MASK0		0x1b04
+#define RM9000x2_OCD_INTP0SET0		0x1b08
+#define RM9000x2_OCD_INTP0CLEAR0	0x1b0c
+#define RM9000x2_OCD_INTP0STATUS1	0x1b10
+#define RM9000x2_OCD_INTP0MASK1		0x1b14
+#define RM9000x2_OCD_INTP0SET1		0x1b18
+#define RM9000x2_OCD_INTP0CLEAR1	0x1b1c
+#define RM9000x2_OCD_INTP0STATUS2	0x1b20
+#define RM9000x2_OCD_INTP0MASK2		0x1b24
+#define RM9000x2_OCD_INTP0SET2		0x1b28
+#define RM9000x2_OCD_INTP0CLEAR2	0x1b2c
+#define RM9000x2_OCD_INTP0STATUS3	0x1b30
+#define RM9000x2_OCD_INTP0MASK3		0x1b34
+#define RM9000x2_OCD_INTP0SET3		0x1b38
+#define RM9000x2_OCD_INTP0CLEAR3	0x1b3c
+#define RM9000x2_OCD_INTP0STATUS4	0x1b40
+#define RM9000x2_OCD_INTP0MASK4		0x1b44
+#define RM9000x2_OCD_INTP0SET4		0x1b48
+#define RM9000x2_OCD_INTP0CLEAR4	0x1b4c
+#define RM9000x2_OCD_INTP0STATUS5	0x1b50
+#define RM9000x2_OCD_INTP0MASK5		0x1b54
+#define RM9000x2_OCD_INTP0SET5		0x1b58
+#define RM9000x2_OCD_INTP0CLEAR5	0x1b5c
+#define RM9000x2_OCD_INTP0STATUS6	0x1b60
+#define RM9000x2_OCD_INTP0MASK6		0x1b64
+#define RM9000x2_OCD_INTP0SET6		0x1b68
+#define RM9000x2_OCD_INTP0CLEAR6	0x1b6c
+#define RM9000x2_OCD_INTP0STATUS7	0x1b70
+#define RM9000x2_OCD_INTP0MASK7		0x1b74
+#define RM9000x2_OCD_INTP0SET7		0x1b78
+#define RM9000x2_OCD_INTP0CLEAR7	0x1b7c
+#define RM9000x2_OCD_INTP1STATUS0	0x2b00
+#define RM9000x2_OCD_INTP1MASK0		0x2b04
+#define RM9000x2_OCD_INTP1SET0		0x2b08
+#define RM9000x2_OCD_INTP1CLEAR0	0x2b0c
+#define RM9000x2_OCD_INTP1STATUS1	0x2b10
+#define RM9000x2_OCD_INTP1MASK1		0x2b14
+#define RM9000x2_OCD_INTP1SET1		0x2b18
+#define RM9000x2_OCD_INTP1CLEAR1	0x2b1c
+#define RM9000x2_OCD_INTP1STATUS2	0x2b20
+#define RM9000x2_OCD_INTP1MASK2		0x2b24
+#define RM9000x2_OCD_INTP1SET2		0x2b28
+#define RM9000x2_OCD_INTP1CLEAR2	0x2b2c
+#define RM9000x2_OCD_INTP1STATUS3	0x2b30
+#define RM9000x2_OCD_INTP1MASK3		0x2b34
+#define RM9000x2_OCD_INTP1SET3		0x2b38
+#define RM9000x2_OCD_INTP1CLEAR3	0x2b3c
+#define RM9000x2_OCD_INTP1STATUS4	0x2b40
+#define RM9000x2_OCD_INTP1MASK4		0x2b44
+#define RM9000x2_OCD_INTP1SET4		0x2b48
+#define RM9000x2_OCD_INTP1CLEAR4	0x2b4c
+#define RM9000x2_OCD_INTP1STATUS5	0x2b50
+#define RM9000x2_OCD_INTP1MASK5		0x2b54
+#define RM9000x2_OCD_INTP1SET5		0x2b58
+#define RM9000x2_OCD_INTP1CLEAR5	0x2b5c
+#define RM9000x2_OCD_INTP1STATUS6	0x2b60
+#define RM9000x2_OCD_INTP1MASK6		0x2b64
+#define RM9000x2_OCD_INTP1SET6		0x2b68
+#define RM9000x2_OCD_INTP1CLEAR6	0x2b6c
+#define RM9000x2_OCD_INTP1STATUS7	0x2b70
+#define RM9000x2_OCD_INTP1MASK7		0x2b74
+#define RM9000x2_OCD_INTP1SET7		0x2b78
+#define RM9000x2_OCD_INTP1CLEAR7	0x2b7c
+
+#define OCD_READ(reg)		(*(volatile unsigned int *)(ocd_base + (reg)))
+#define OCD_WRITE(reg, val)					\
+	do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0)
+
+/*
+ * Hypertransport specific macros
+ */
+#define RM9K_WRITE(ofs, data)   *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data
+
+#define RM9K_READ(ofs, val)     *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_8(ofs, val)   *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_16(ofs, val)  *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
+
+#endif
diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h
new file mode 100644
index 0000000..80d9dfc
--- /dev/null
+++ b/arch/mips/include/asm/tlb.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+/*
+ * MIPS doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma) 				\
+	do {							\
+		if (!tlb->fullmm)				\
+			flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+	}  while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_TLB_H */
diff --git a/arch/mips/include/asm/tlbdebug.h b/arch/mips/include/asm/tlbdebug.h
new file mode 100644
index 0000000..bb8f5c2
--- /dev/null
+++ b/arch/mips/include/asm/tlbdebug.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 by Ralf Baechle
+ */
+#ifndef __ASM_TLBDEBUG_H
+#define __ASM_TLBDEBUG_H
+
+/*
+ * TLB debugging functions:
+ */
+extern void dump_tlb_all(void);
+
+#endif /* __ASM_TLBDEBUG_H */
diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h
new file mode 100644
index 0000000..86b21de
--- /dev/null
+++ b/arch/mips/include/asm/tlbflush.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+	unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long,
+	unsigned long);
+extern void flush_tlb_kernel_range(unsigned long, unsigned long);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_one(unsigned long vaddr);
+
+#else /* CONFIG_SMP */
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma, vmaddr, end)	local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr,end) \
+	local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr)		local_flush_tlb_one(vaddr)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_TLBFLUSH_H */
diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h
new file mode 100644
index 0000000..259145e
--- /dev/null
+++ b/arch/mips/include/asm/topology.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#include <topology.h>
+
+#ifdef CONFIG_SMP
+#define smt_capable()   (smp_num_siblings > 1)
+#endif
+
+#endif /* __ASM_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
new file mode 100644
index 0000000..90ff2f4
--- /dev/null
+++ b/arch/mips/include/asm/traps.h
@@ -0,0 +1,28 @@
+/*
+ *	Trap handling definitions.
+ *
+ *	Copyright (C) 2002, 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_TRAPS_H
+#define _ASM_TRAPS_H
+
+/*
+ * Possible status responses for a board_be_handler backend.
+ */
+#define MIPS_BE_DISCARD	0		/* return with no action */
+#define MIPS_BE_FIXUP	1		/* return to the fixup code */
+#define MIPS_BE_FATAL	2		/* treat as an unrecoverable error */
+
+extern void (*board_be_init)(void);
+extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+
+extern void (*board_nmi_handler_setup)(void);
+extern void (*board_ejtag_handler_setup)(void);
+extern void (*board_bind_eic_interrupt)(int irq, int regset);
+
+#endif /* _ASM_TRAPS_H */
diff --git a/arch/mips/include/asm/txx9/boards.h b/arch/mips/include/asm/txx9/boards.h
new file mode 100644
index 0000000..cbe9476
--- /dev/null
+++ b/arch/mips/include/asm/txx9/boards.h
@@ -0,0 +1,13 @@
+#ifdef CONFIG_TOSHIBA_JMR3927
+BOARD_VEC(jmr3927_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4927
+BOARD_VEC(rbtx4927_vec)
+BOARD_VEC(rbtx4937_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
+BOARD_VEC(rbtx4938_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4939
+BOARD_VEC(rbtx4939_vec)
+#endif
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
new file mode 100644
index 0000000..4316a3e
--- /dev/null
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -0,0 +1,89 @@
+/*
+ * linux/include/asm-mips/txx9/generic.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_GENERIC_H
+#define __ASM_TXX9_GENERIC_H
+
+#include <linux/init.h>
+#include <linux/ioport.h>	/* for struct resource */
+
+extern struct resource txx9_ce_res[];
+#define TXX9_CE(n)	(unsigned long)(txx9_ce_res[(n)].start)
+extern unsigned int txx9_pcode;
+extern char txx9_pcode_str[8];
+void txx9_reg_res_init(unsigned int pcode, unsigned long base,
+		       unsigned long size);
+
+extern unsigned int txx9_master_clock;
+extern unsigned int txx9_cpu_clock;
+extern unsigned int txx9_gbus_clock;
+#define TXX9_IMCLK	(txx9_gbus_clock / 2)
+
+extern int txx9_ccfg_toeon;
+struct uart_port;
+int early_serial_txx9_setup(struct uart_port *port);
+
+struct pci_dev;
+struct txx9_board_vec {
+	const char *system;
+	void (*prom_init)(void);
+	void (*mem_setup)(void);
+	void (*irq_setup)(void);
+	void (*time_init)(void);
+	void (*arch_init)(void);
+	void (*device_init)(void);
+#ifdef CONFIG_PCI
+	int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif
+};
+extern struct txx9_board_vec *txx9_board_vec;
+extern int (*txx9_irq_dispatch)(int pending);
+char *prom_getcmdline(void);
+const char *prom_getenv(const char *name);
+void txx9_wdt_init(unsigned long base);
+void txx9_wdt_now(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
+
+struct physmap_flash_data;
+void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size,
+			     const struct physmap_flash_data *pdata);
+
+/* 8 bit version of __fls(): find first bit set (returns 0..7) */
+static inline unsigned int __fls8(unsigned char x)
+{
+	int r = 7;
+
+	if (!(x & 0xf0)) {
+		r -= 4;
+		x <<= 4;
+	}
+	if (!(x & 0xc0)) {
+		r -= 2;
+		x <<= 2;
+	}
+	if (!(x & 0x80))
+		r -= 1;
+	return r;
+}
+
+void txx9_iocled_init(unsigned long baseaddr,
+		      int basenum, unsigned int num, int lowactive,
+		      const char *color, char **deftriggers);
+
+#endif /* __ASM_TXX9_GENERIC_H */
diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h
new file mode 100644
index 0000000..a409c44
--- /dev/null
+++ b/arch/mips/include/asm/txx9/jmr3927.h
@@ -0,0 +1,180 @@
+/*
+ * Defines for the TJSYS JMR-TX3927
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_JMR3927_H
+#define __ASM_TXX9_JMR3927_H
+
+#include <asm/txx9/tx3927.h>
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/txx9irq.h>
+
+/* CS */
+#define JMR3927_ROMCE0	0x1fc00000	/* 4M */
+#define JMR3927_ROMCE1	0x1e000000	/* 4M */
+#define JMR3927_ROMCE2	0x14000000	/* 16M */
+#define JMR3927_ROMCE3	0x10000000	/* 64M */
+#define JMR3927_ROMCE5	0x1d000000	/* 4M */
+#define JMR3927_SDCS0	0x00000000	/* 32M */
+#define JMR3927_SDCS1	0x02000000	/* 32M */
+/* PCI Direct Mappings */
+
+#define JMR3927_PCIMEM	0x08000000
+#define JMR3927_PCIMEM_SIZE	0x08000000	/* 128M */
+#define JMR3927_PCIIO	0x15000000
+#define JMR3927_PCIIO_SIZE	0x01000000	/* 16M */
+
+#define JMR3927_SDRAM_SIZE	0x02000000	/* 32M */
+#define JMR3927_PORT_BASE	KSEG1
+
+/* Address map (virtual address) */
+#define JMR3927_ROM0_BASE	(KSEG1 + JMR3927_ROMCE0)
+#define JMR3927_ROM1_BASE	(KSEG1 + JMR3927_ROMCE1)
+#define JMR3927_IOC_BASE	(KSEG1 + JMR3927_ROMCE2)
+#define JMR3927_PCIMEM_BASE	(KSEG1 + JMR3927_PCIMEM)
+#define JMR3927_PCIIO_BASE	(KSEG1 + JMR3927_PCIIO)
+
+#define JMR3927_IOC_REV_ADDR	(JMR3927_IOC_BASE + 0x00000000)
+#define JMR3927_IOC_NVRAMB_ADDR	(JMR3927_IOC_BASE + 0x00010000)
+#define JMR3927_IOC_LED_ADDR	(JMR3927_IOC_BASE + 0x00020000)
+#define JMR3927_IOC_DIPSW_ADDR	(JMR3927_IOC_BASE + 0x00030000)
+#define JMR3927_IOC_BREV_ADDR	(JMR3927_IOC_BASE + 0x00040000)
+#define JMR3927_IOC_DTR_ADDR	(JMR3927_IOC_BASE + 0x00050000)
+#define JMR3927_IOC_INTS1_ADDR	(JMR3927_IOC_BASE + 0x00080000)
+#define JMR3927_IOC_INTS2_ADDR	(JMR3927_IOC_BASE + 0x00090000)
+#define JMR3927_IOC_INTM_ADDR	(JMR3927_IOC_BASE + 0x000a0000)
+#define JMR3927_IOC_INTP_ADDR	(JMR3927_IOC_BASE + 0x000b0000)
+#define JMR3927_IOC_RESET_ADDR	(JMR3927_IOC_BASE + 0x000f0000)
+
+/* Flash ROM */
+#define JMR3927_FLASH_BASE	(JMR3927_ROM0_BASE)
+#define JMR3927_FLASH_SIZE	0x00400000
+
+/* bits for IOC_REV/IOC_BREV (high byte) */
+#define JMR3927_IDT_MASK	0xfc
+#define JMR3927_REV_MASK	0x03
+#define JMR3927_IOC_IDT		0xe0
+
+/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */
+#define JMR3927_IOC_INTB_PCIA	0
+#define JMR3927_IOC_INTB_PCIB	1
+#define JMR3927_IOC_INTB_PCIC	2
+#define JMR3927_IOC_INTB_PCID	3
+#define JMR3927_IOC_INTB_MODEM	4
+#define JMR3927_IOC_INTB_INT6	5
+#define JMR3927_IOC_INTB_INT7	6
+#define JMR3927_IOC_INTB_SOFT	7
+#define JMR3927_IOC_INTF_PCIA	(1 << JMR3927_IOC_INTF_PCIA)
+#define JMR3927_IOC_INTF_PCIB	(1 << JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IOC_INTF_PCIC	(1 << JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IOC_INTF_PCID	(1 << JMR3927_IOC_INTB_PCID)
+#define JMR3927_IOC_INTF_MODEM	(1 << JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IOC_INTF_INT6	(1 << JMR3927_IOC_INTB_INT6)
+#define JMR3927_IOC_INTF_INT7	(1 << JMR3927_IOC_INTB_INT7)
+#define JMR3927_IOC_INTF_SOFT	(1 << JMR3927_IOC_INTB_SOFT)
+
+/* bits for IOC_RESET (high byte) */
+#define JMR3927_IOC_RESET_CPU	1
+#define JMR3927_IOC_RESET_PCI	2
+
+#if defined(__BIG_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)(a)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)(a))
+#elif defined(__LITTLE_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a)	((*(volatile unsigned char *)((a)^1)) = (d))
+#define jmr3927_ioc_reg_in(a)		(*(volatile unsigned char *)((a)^1))
+#else
+#error "No Endian"
+#endif
+
+/* LED macro */
+#define jmr3927_led_set(n/*0-16*/)	jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR)
+
+#define jmr3927_led_and_set(n/*0-16*/)	jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR)
+
+/* DIPSW4 macro */
+#define jmr3927_dipsw1()	(gpio_get_value(11) == 0)
+#define jmr3927_dipsw2()	(gpio_get_value(10) == 0)
+#define jmr3927_dipsw3()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0)
+#define jmr3927_dipsw4()	((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0)
+
+/*
+ * IRQ mappings
+ */
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an JMR machine.  Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define JMR3927_NR_IRQ_IRC	16	/* On-Chip IRC */
+#define JMR3927_NR_IRQ_IOC	8	/* PCI/MODEM/INT[6:7] */
+
+#define JMR3927_IRQ_IRC	TXX9_IRQ_BASE
+#define JMR3927_IRQ_IOC	(JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
+#define JMR3927_IRQ_END	(JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
+
+#define JMR3927_IRQ_IRC_INT0	(JMR3927_IRQ_IRC + TX3927_IR_INT0)
+#define JMR3927_IRQ_IRC_INT1	(JMR3927_IRQ_IRC + TX3927_IR_INT1)
+#define JMR3927_IRQ_IRC_INT2	(JMR3927_IRQ_IRC + TX3927_IR_INT2)
+#define JMR3927_IRQ_IRC_INT3	(JMR3927_IRQ_IRC + TX3927_IR_INT3)
+#define JMR3927_IRQ_IRC_INT4	(JMR3927_IRQ_IRC + TX3927_IR_INT4)
+#define JMR3927_IRQ_IRC_INT5	(JMR3927_IRQ_IRC + TX3927_IR_INT5)
+#define JMR3927_IRQ_IRC_SIO0	(JMR3927_IRQ_IRC + TX3927_IR_SIO0)
+#define JMR3927_IRQ_IRC_SIO1	(JMR3927_IRQ_IRC + TX3927_IR_SIO1)
+#define JMR3927_IRQ_IRC_SIO(ch)	(JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
+#define JMR3927_IRQ_IRC_DMA	(JMR3927_IRQ_IRC + TX3927_IR_DMA)
+#define JMR3927_IRQ_IRC_PIO	(JMR3927_IRQ_IRC + TX3927_IR_PIO)
+#define JMR3927_IRQ_IRC_PCI	(JMR3927_IRQ_IRC + TX3927_IR_PCI)
+#define JMR3927_IRQ_IRC_TMR(ch)	(JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
+#define JMR3927_IRQ_IOC_PCIA	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
+#define JMR3927_IRQ_IOC_PCIB	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IRQ_IOC_PCIC	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IRQ_IOC_PCID	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID)
+#define JMR3927_IRQ_IOC_MODEM	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IRQ_IOC_INT6	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6)
+#define JMR3927_IRQ_IOC_INT7	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7)
+#define JMR3927_IRQ_IOC_SOFT	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT)
+
+/* IOC (PCI, MODEM) */
+#define JMR3927_IRQ_IOCINT	JMR3927_IRQ_IRC_INT1
+/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
+#define JMR3927_IRQ_ETHER0	JMR3927_IRQ_IRC_INT3
+
+/* Clocks */
+#define JMR3927_CORECLK	132710400	/* 132.7MHz */
+
+/*
+ * TX3927 Pin Configuration:
+ *
+ *	PCFG bits		Avail			Dead
+ *	SELSIO[1:0]:11		RXD[1:0], TXD[1:0]	PIO[6:3]
+ *	SELSIOC[0]:1		CTS[0], RTS[0]		INT[5:4]
+ *	SELSIOC[1]:0,SELDSF:0,	GSDAO[0],GPCST[3]	CTS[1], RTS[1],DSF,
+ *	  GDBGE*					  PIO[2:1]
+ *	SELDMA[2]:1		DMAREQ[2],DMAACK[2]	PIO[13:12]
+ *	SELTMR[2:0]:000					TIMER[1:0]
+ *	SELCS:0,SELDMA[1]:0	PIO[11;10]		SDCS_CE[7:6],
+ *							  DMAREQ[1],DMAACK[1]
+ *	SELDMA[0]:1		DMAREQ[0],DMAACK[0]	PIO[9:8]
+ *	SELDMA[3]:1		DMAREQ[3],DMAACK[3]	PIO[15:14]
+ *	SELDONE:1		DMADONE			PIO[7]
+ *
+ * Usable pins are:
+ *	RXD[1;0],TXD[1:0],CTS[0],RTS[0],
+ *	DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11]
+ *	INT[3:0]
+ */
+
+void jmr3927_prom_init(void);
+void jmr3927_irq_setup(void);
+struct pci_dev;
+int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_JMR3927_H */
diff --git a/arch/mips/include/asm/txx9/pci.h b/arch/mips/include/asm/txx9/pci.h
new file mode 100644
index 0000000..3d32529
--- /dev/null
+++ b/arch/mips/include/asm/txx9/pci.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_PCI_H
+#define __ASM_TXX9_PCI_H
+
+#include <linux/pci.h>
+
+extern struct pci_controller txx9_primary_pcic;
+struct pci_controller *
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size);
+
+int txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			int current_bus);
+extern int txx9_pci_mem_high __initdata;
+
+extern int txx9_pci_option;
+#define TXX9_PCI_OPT_PICMG	0x0002
+#define TXX9_PCI_OPT_CLK_33	0x0008
+#define TXX9_PCI_OPT_CLK_66	0x0010
+#define TXX9_PCI_OPT_CLK_MASK	\
+	(TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66)
+#define TXX9_PCI_OPT_CLK_AUTO	TXX9_PCI_OPT_CLK_MASK
+
+enum txx9_pci_err_action {
+	TXX9_PCI_ERR_REPORT,
+	TXX9_PCI_ERR_IGNORE,
+	TXX9_PCI_ERR_PANIC,
+};
+extern enum txx9_pci_err_action txx9_pci_err_action;
+
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
+#endif /* __ASM_TXX9_PCI_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h
new file mode 100644
index 0000000..b2adab3
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4927.h
@@ -0,0 +1,92 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_RBTX4927_H
+#define __ASM_TXX9_RBTX4927_H
+
+#include <asm/txx9/tx4927.h>
+
+#define RBTX4927_PCIMEM		0x08000000
+#define RBTX4927_PCIMEM_SIZE	0x08000000
+#define RBTX4927_PCIIO		0x16000000
+#define RBTX4927_PCIIO_SIZE	0x01000000
+
+#define RBTX4927_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4927_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4927_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4927_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4927_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f000)
+#define RBTX4927_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f002)
+#define RBTX4927_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f006)
+#define RBTX4927_BRAMRTC_BASE	(IO_BASE + TXX9_CE(2) + 0x00010000)
+#define RBTX4927_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4927_ETHER_ADDR	(RBTX4927_ETHER_BASE + 0x280)
+
+#define rbtx4927_imask_addr	((__u8 __iomem *)RBTX4927_IMASK_ADDR)
+#define rbtx4927_imstat_addr	((__u8 __iomem *)RBTX4927_IMSTAT_ADDR)
+#define rbtx4927_softint_addr	((__u8 __iomem *)RBTX4927_SOFTINT_ADDR)
+#define rbtx4927_softreset_addr	((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
+#define rbtx4927_softresetlock_addr	\
+				((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR)
+#define rbtx4927_pcireset_addr	((__u8 __iomem *)RBTX4927_PCIRESET_ADDR)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4927_INTB_PCID	0
+#define RBTX4927_INTB_PCIC	1
+#define RBTX4927_INTB_PCIB	2
+#define RBTX4927_INTB_PCIA	3
+#define RBTX4927_INTF_PCID	(1 << RBTX4927_INTB_PCID)
+#define RBTX4927_INTF_PCIC	(1 << RBTX4927_INTB_PCIC)
+#define RBTX4927_INTF_PCIB	(1 << RBTX4927_INTB_PCIB)
+#define RBTX4927_INTF_PCIA	(1 << RBTX4927_INTB_PCIA)
+
+#define RBTX4927_NR_IRQ_IOC	8	/* IOC */
+
+#define RBTX4927_IRQ_IOC	(TXX9_IRQ_BASE + TX4927_NUM_IR)
+#define RBTX4927_IRQ_IOC_PCID	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID)
+#define RBTX4927_IRQ_IOC_PCIC	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC)
+#define RBTX4927_IRQ_IOC_PCIB	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB)
+#define RBTX4927_IRQ_IOC_PCIA	(RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA)
+
+#define RBTX4927_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4927_IR_INT(1))
+
+#ifdef CONFIG_PCI
+#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO
+#else
+#define RBTX4927_ISA_IO_OFFSET 0
+#endif
+
+#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base)
+#define RBTX4927_RTL_8019_IRQ  (TXX9_IRQ_BASE + TX4927_IR_INT(3))
+
+void rbtx4927_prom_init(void);
+void rbtx4927_irq_setup(void);
+struct pci_dev;
+int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4927_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h
new file mode 100644
index 0000000..9f0441a
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4938.h
@@ -0,0 +1,145 @@
+/*
+ * Definitions for TX4937/TX4938
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_RBTX4938_H
+#define __ASM_TXX9_RBTX4938_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4938.h>
+
+/* Address map */
+#define RBTX4938_FPGA_REG_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000008)
+#define RBTX4938_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4938_DIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001004)
+#define RBTX4938_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4938_IMASK2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002002)
+#define RBTX4938_INTPOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002004)
+#define RBTX4938_ISTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005000)
+#define RBTX4938_SPICS_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005002)
+#define RBTX4938_SFPWR_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005008)
+#define RBTX4938_SFVOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007004)
+#define RBTX4938_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address (Jumperless Mode (W12:Open)) */
+#define RBTX4938_ETHER_ADDR	(RBTX4938_ETHER_BASE + 0x280)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4938_INTB_PCID	0
+#define RBTX4938_INTB_PCIC	1
+#define RBTX4938_INTB_PCIB	2
+#define RBTX4938_INTB_PCIA	3
+#define RBTX4938_INTB_RTC	4
+#define RBTX4938_INTB_ATA	5
+#define RBTX4938_INTB_MODEM	6
+#define RBTX4938_INTB_SWINT	7
+#define RBTX4938_INTF_PCID	(1 << RBTX4938_INTB_PCID)
+#define RBTX4938_INTF_PCIC	(1 << RBTX4938_INTB_PCIC)
+#define RBTX4938_INTF_PCIB	(1 << RBTX4938_INTB_PCIB)
+#define RBTX4938_INTF_PCIA	(1 << RBTX4938_INTB_PCIA)
+#define RBTX4938_INTF_RTC	(1 << RBTX4938_INTB_RTC)
+#define RBTX4938_INTF_ATA	(1 << RBTX4938_INTB_ATA)
+#define RBTX4938_INTF_MODEM	(1 << RBTX4938_INTB_MODEM)
+#define RBTX4938_INTF_SWINT	(1 << RBTX4938_INTB_SWINT)
+
+#define rbtx4938_fpga_rev_addr	((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR)
+#define rbtx4938_led_addr	((__u8 __iomem *)RBTX4938_LED_ADDR)
+#define rbtx4938_dipsw_addr	((__u8 __iomem *)RBTX4938_DIPSW_ADDR)
+#define rbtx4938_bdipsw_addr	((__u8 __iomem *)RBTX4938_BDIPSW_ADDR)
+#define rbtx4938_imask_addr	((__u8 __iomem *)RBTX4938_IMASK_ADDR)
+#define rbtx4938_imask2_addr	((__u8 __iomem *)RBTX4938_IMASK2_ADDR)
+#define rbtx4938_intpol_addr	((__u8 __iomem *)RBTX4938_INTPOL_ADDR)
+#define rbtx4938_istat_addr	((__u8 __iomem *)RBTX4938_ISTAT_ADDR)
+#define rbtx4938_istat2_addr	((__u8 __iomem *)RBTX4938_ISTAT2_ADDR)
+#define rbtx4938_imstat_addr	((__u8 __iomem *)RBTX4938_IMSTAT_ADDR)
+#define rbtx4938_imstat2_addr	((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR)
+#define rbtx4938_softint_addr	((__u8 __iomem *)RBTX4938_SOFTINT_ADDR)
+#define rbtx4938_piosel_addr	((__u8 __iomem *)RBTX4938_PIOSEL_ADDR)
+#define rbtx4938_spics_addr	((__u8 __iomem *)RBTX4938_SPICS_ADDR)
+#define rbtx4938_sfpwr_addr	((__u8 __iomem *)RBTX4938_SFPWR_ADDR)
+#define rbtx4938_sfvol_addr	((__u8 __iomem *)RBTX4938_SFVOL_ADDR)
+#define rbtx4938_softreset_addr	((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softresetlock_addr	\
+				((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR)
+#define rbtx4938_pcireset_addr	((__u8 __iomem *)RBTX4938_PCIRESET_ADDR)
+
+/*
+ * IRQ mappings
+ */
+
+#define RBTX4938_SOFT_INT0	0	/* not used */
+#define RBTX4938_SOFT_INT1	1	/* not used */
+#define RBTX4938_IRC_INT	2
+#define RBTX4938_TIMER_INT	7
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an RBTX4938 machine.  Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define RBTX4938_NR_IRQ_IOC	8
+
+#define RBTX4938_IRQ_IRC	TXX9_IRQ_BASE
+#define RBTX4938_IRQ_IOC	(TXX9_IRQ_BASE + TX4938_NUM_IR)
+#define RBTX4938_IRQ_END	(RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
+
+#define RBTX4938_IRQ_IRC_ECCERR	(RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR	(RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n)	(RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n)	(RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_DMA(ch, n)	(RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n))
+#define RBTX4938_IRQ_IRC_PIO	(RBTX4938_IRQ_IRC + TX4938_IR_PIO)
+#define RBTX4938_IRQ_IRC_PDMAC	(RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
+#define RBTX4938_IRQ_IRC_PCIC	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
+#define RBTX4938_IRQ_IRC_TMR(n)	(RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_NDFMC	(RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
+#define RBTX4938_IRQ_IRC_PCIERR	(RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME	(RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_ACLC	(RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
+#define RBTX4938_IRQ_IRC_ACLCPME	(RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
+#define RBTX4938_IRQ_IRC_PCIC1	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
+#define RBTX4938_IRQ_IRC_SPI	(RBTX4938_IRQ_IRC + TX4938_IR_SPI)
+#define RBTX4938_IRQ_IOC_PCID	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
+#define RBTX4938_IRQ_IOC_PCIC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
+#define RBTX4938_IRQ_IOC_PCIB	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
+#define RBTX4938_IRQ_IOC_PCIA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
+#define RBTX4938_IRQ_IOC_RTC	(RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
+#define RBTX4938_IRQ_IOC_ATA	(RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
+#define RBTX4938_IRQ_IOC_MODEM	(RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
+#define RBTX4938_IRQ_IOC_SWINT	(RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
+
+
+/* IOC (PCI, etc) */
+#define RBTX4938_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4938_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4938_IRQ_ETHER	(TXX9_IRQ_BASE + TX4938_IR_INT(1))
+
+#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
+#define RBTX4938_RTL_8019_IRQ  (RBTX4938_IRQ_ETHER)
+
+void rbtx4938_prom_init(void);
+void rbtx4938_irq_setup(void);
+struct pci_dev;
+int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4938_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h
new file mode 100644
index 0000000..1acf428
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4939.h
@@ -0,0 +1,133 @@
+/*
+ * Definitions for RBTX4939
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2006
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_RBTX4939_H
+#define __ASM_TXX9_RBTX4939_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+/* Address map */
+#define RBTX4939_IOC_REG_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_BOARD_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_IOC_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000002)
+#define RBTX4939_CONFIG1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000004)
+#define RBTX4939_CONFIG2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000006)
+#define RBTX4939_CONFIG3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000008)
+#define RBTX4939_CONFIG4_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000000a)
+#define RBTX4939_USTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001000)
+#define RBTX4939_UDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001002)
+#define RBTX4939_BDIPSW_ADDR	(IO_BASE + TXX9_CE(1) + 0x00001004)
+#define RBTX4939_IEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002000)
+#define RBTX4939_IPOL_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002002)
+#define RBTX4939_IFAC1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002004)
+#define RBTX4939_IFAC2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00002006)
+#define RBTX4939_SOFTINT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00003000)
+#define RBTX4939_ISASTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004000)
+#define RBTX4939_PCISTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004002)
+#define RBTX4939_ROME_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004004)
+#define RBTX4939_SPICS_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004006)
+#define RBTX4939_AUDI_ADDR	(IO_BASE + TXX9_CE(1) + 0x00004008)
+#define RBTX4939_ISAGPIO_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000400a)
+#define RBTX4939_PE1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005000)
+#define RBTX4939_PE2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005002)
+#define RBTX4939_PE3_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005004)
+#define RBTX4939_VP_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005006)
+#define RBTX4939_VPRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00005008)
+#define RBTX4939_VPSOUT_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500a)
+#define RBTX4939_VPSIN_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500c)
+#define RBTX4939_7SEG_ADDR(s, ch)	\
+	(IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2)
+#define RBTX4939_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007000)
+#define RBTX4939_RESETEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007002)
+#define RBTX4939_RESETSTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007004)
+#define RBTX4939_ETHER_BASE	(IO_BASE + TXX9_CE(1) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4939_ETHER_ADDR	(RBTX4939_ETHER_BASE + 0x300)
+
+/* bits for IEN/IPOL/IFAC */
+#define RBTX4938_INTB_ISA0	0
+#define RBTX4938_INTB_ISA11	1
+#define RBTX4938_INTB_ISA12	2
+#define RBTX4938_INTB_ISA15	3
+#define RBTX4938_INTB_I2S	4
+#define RBTX4938_INTB_SW	5
+#define RBTX4938_INTF_ISA0	(1 << RBTX4938_INTB_ISA0)
+#define RBTX4938_INTF_ISA11	(1 << RBTX4938_INTB_ISA11)
+#define RBTX4938_INTF_ISA12	(1 << RBTX4938_INTB_ISA12)
+#define RBTX4938_INTF_ISA15	(1 << RBTX4938_INTB_ISA15)
+#define RBTX4938_INTF_I2S	(1 << RBTX4938_INTB_I2S)
+#define RBTX4938_INTF_SW	(1 << RBTX4938_INTB_SW)
+
+/* bits for PE1,PE2,PE3 */
+#define RBTX4939_PE1_ATA(ch)	(0x01 << (ch))
+#define RBTX4939_PE1_RMII(ch)	(0x04 << (ch))
+#define RBTX4939_PE2_SIO0	0x01
+#define RBTX4939_PE2_SIO2	0x02
+#define RBTX4939_PE2_SIO3	0x04
+#define RBTX4939_PE2_CIR	0x08
+#define RBTX4939_PE2_SPI	0x10
+#define RBTX4939_PE2_GPIO	0x20
+#define RBTX4939_PE3_VP	0x01
+#define RBTX4939_PE3_VP_P	0x02
+#define RBTX4939_PE3_VP_S	0x04
+
+#define rbtx4939_board_rev_addr	((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
+#define rbtx4939_ioc_rev_addr	((u8 __iomem *)RBTX4939_IOC_REV_ADDR)
+#define rbtx4939_config1_addr	((u8 __iomem *)RBTX4939_CONFIG1_ADDR)
+#define rbtx4939_config2_addr	((u8 __iomem *)RBTX4939_CONFIG2_ADDR)
+#define rbtx4939_config3_addr	((u8 __iomem *)RBTX4939_CONFIG3_ADDR)
+#define rbtx4939_config4_addr	((u8 __iomem *)RBTX4939_CONFIG4_ADDR)
+#define rbtx4939_ustat_addr	((u8 __iomem *)RBTX4939_USTAT_ADDR)
+#define rbtx4939_udipsw_addr	((u8 __iomem *)RBTX4939_UDIPSW_ADDR)
+#define rbtx4939_bdipsw_addr	((u8 __iomem *)RBTX4939_BDIPSW_ADDR)
+#define rbtx4939_ien_addr	((u8 __iomem *)RBTX4939_IEN_ADDR)
+#define rbtx4939_ipol_addr	((u8 __iomem *)RBTX4939_IPOL_ADDR)
+#define rbtx4939_ifac1_addr	((u8 __iomem *)RBTX4939_IFAC1_ADDR)
+#define rbtx4939_ifac2_addr	((u8 __iomem *)RBTX4939_IFAC2_ADDR)
+#define rbtx4939_softint_addr	((u8 __iomem *)RBTX4939_SOFTINT_ADDR)
+#define rbtx4939_isastat_addr	((u8 __iomem *)RBTX4939_ISASTAT_ADDR)
+#define rbtx4939_pcistat_addr	((u8 __iomem *)RBTX4939_PCISTAT_ADDR)
+#define rbtx4939_rome_addr	((u8 __iomem *)RBTX4939_ROME_ADDR)
+#define rbtx4939_spics_addr	((u8 __iomem *)RBTX4939_SPICS_ADDR)
+#define rbtx4939_audi_addr	((u8 __iomem *)RBTX4939_AUDI_ADDR)
+#define rbtx4939_isagpio_addr	((u8 __iomem *)RBTX4939_ISAGPIO_ADDR)
+#define rbtx4939_pe1_addr	((u8 __iomem *)RBTX4939_PE1_ADDR)
+#define rbtx4939_pe2_addr	((u8 __iomem *)RBTX4939_PE2_ADDR)
+#define rbtx4939_pe3_addr	((u8 __iomem *)RBTX4939_PE3_ADDR)
+#define rbtx4939_vp_addr	((u8 __iomem *)RBTX4939_VP_ADDR)
+#define rbtx4939_vpreset_addr	((u8 __iomem *)RBTX4939_VPRESET_ADDR)
+#define rbtx4939_vpsout_addr	((u8 __iomem *)RBTX4939_VPSOUT_ADDR)
+#define rbtx4939_vpsin_addr	((u8 __iomem *)RBTX4939_VPSIN_ADDR)
+#define rbtx4939_7seg_addr(s, ch) \
+				((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch))
+#define rbtx4939_softreset_addr	((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
+#define rbtx4939_reseten_addr	((u8 __iomem *)RBTX4939_RESETEN_ADDR)
+#define rbtx4939_resetstat_addr	((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
+
+/*
+ * IRQ mappings
+ */
+#define RBTX4939_NR_IRQ_IOC	8
+
+#define RBTX4939_IRQ_IOC	(TXX9_IRQ_BASE + TX4939_NUM_IR)
+#define RBTX4939_IRQ_END	(RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC)
+
+/* IOC (ISA, etc) */
+#define RBTX4939_IRQ_IOCINT	(TXX9_IRQ_BASE + TX4939_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4939_IRQ_ETHER	(TXX9_IRQ_BASE + TX4939_IR_INT(1))
+
+void rbtx4939_prom_init(void);
+void rbtx4939_irq_setup(void);
+
+#endif /* __ASM_TXX9_RBTX4939_H */
diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
new file mode 100644
index 0000000..d1d6332
--- /dev/null
+++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
@@ -0,0 +1,68 @@
+/*
+ * Interface for smsc fdc48m81x Super IO chip
+ *
+ * Author: MontaVista Software, Inc. source@mvista.com
+ *
+ * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef _SMSC_FDC37M81X_H_
+#define _SMSC_FDC37M81X_H_
+
+/* Common Registers */
+#define SMSC_FDC37M81X_CONFIG_INDEX  0x00
+#define SMSC_FDC37M81X_CONFIG_DATA   0x01
+#define SMSC_FDC37M81X_CONF          0x02
+#define SMSC_FDC37M81X_INDEX         0x03
+#define SMSC_FDC37M81X_DNUM          0x07
+#define SMSC_FDC37M81X_DID           0x20
+#define SMSC_FDC37M81X_DREV          0x21
+#define SMSC_FDC37M81X_PCNT          0x22
+#define SMSC_FDC37M81X_PMGT          0x23
+#define SMSC_FDC37M81X_OSC           0x24
+#define SMSC_FDC37M81X_CONFPA0       0x26
+#define SMSC_FDC37M81X_CONFPA1       0x27
+#define SMSC_FDC37M81X_TEST4         0x2B
+#define SMSC_FDC37M81X_TEST5         0x2C
+#define SMSC_FDC37M81X_TEST1         0x2D
+#define SMSC_FDC37M81X_TEST2         0x2E
+#define SMSC_FDC37M81X_TEST3         0x2F
+
+/* Logical device numbers */
+#define SMSC_FDC37M81X_FDD           0x00
+#define SMSC_FDC37M81X_PARALLEL      0x03
+#define SMSC_FDC37M81X_SERIAL1       0x04
+#define SMSC_FDC37M81X_SERIAL2       0x05
+#define SMSC_FDC37M81X_KBD           0x07
+#define SMSC_FDC37M81X_AUXIO         0x08
+#define SMSC_FDC37M81X_NONE          0xff
+
+/* Logical device Config Registers */
+#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_BASEADDR0     0x60
+#define SMSC_FDC37M81X_BASEADDR1     0x61
+#define SMSC_FDC37M81X_INT           0x70
+#define SMSC_FDC37M81X_INT2          0x72
+#define SMSC_FDC37M81X_LDCR_F0       0xF0
+
+/* Chip Config Values */
+#define SMSC_FDC37M81X_CONFIG_ENTER  0x55
+#define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
+#define SMSC_FDC37M81X_CHIP_ID       0x4d
+
+unsigned long smsc_fdc37m81x_init(unsigned long port);
+
+void smsc_fdc37m81x_config_beg(void);
+
+void smsc_fdc37m81x_config_end(void);
+
+u8 smsc_fdc37m81x_config_get(u8 reg);
+void smsc_fdc37m81x_config_set(u8 reg, u8 val);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/spi.h b/arch/mips/include/asm/txx9/spi.h
new file mode 100644
index 0000000..0d727f3
--- /dev/null
+++ b/arch/mips/include/asm/txx9/spi.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for TX4937/TX4938 SPI
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_SPI_H
+#define __ASM_TXX9_SPI_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SPI
+int spi_eeprom_register(int busid, int chipid, int size);
+int spi_eeprom_read(int busid, int chipid,
+		    int address, unsigned char *buf, int len);
+#else
+static inline int spi_eeprom_register(int busid, int chipid, int size)
+{
+	return -ENODEV;
+}
+static inline int spi_eeprom_read(int busid, int chipid,
+				  int address, unsigned char *buf, int len)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_TXX9_SPI_H */
diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h
new file mode 100644
index 0000000..dc30c8d
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx3927.h
@@ -0,0 +1,341 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_TX3927_H
+#define __ASM_TXX9_TX3927_H
+
+#define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
+#define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
+#define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
+#define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
+#define TX3927_IRC_REG		(TX3927_REG_BASE + 0xc000)
+#define TX3927_PCIC_REG		(TX3927_REG_BASE + 0xd000)
+#define TX3927_CCFG_REG		(TX3927_REG_BASE + 0xe000)
+#define TX3927_NR_TMR	3
+#define TX3927_TMR_REG(ch)	(TX3927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX3927_NR_SIO	2
+#define TX3927_SIO_REG(ch)	(TX3927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX3927_PIO_REG		(TX3927_REG_BASE + 0xf500)
+
+struct tx3927_sdramc_reg {
+	volatile unsigned long cr[8];
+	volatile unsigned long tr[3];
+	volatile unsigned long cmd;
+	volatile unsigned long smrs[2];
+};
+
+struct tx3927_romc_reg {
+	volatile unsigned long cr[8];
+};
+
+struct tx3927_dma_reg {
+	struct tx3927_dma_ch_reg {
+		volatile unsigned long cha;
+		volatile unsigned long sar;
+		volatile unsigned long dar;
+		volatile unsigned long cntr;
+		volatile unsigned long sair;
+		volatile unsigned long dair;
+		volatile unsigned long ccr;
+		volatile unsigned long csr;
+	} ch[4];
+	volatile unsigned long dbr[8];
+	volatile unsigned long tdhr;
+	volatile unsigned long mcr;
+	volatile unsigned long unused0;
+};
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_s2(e1, e2)	\
+	volatile unsigned short e1, e2
+#define endian_def_sb2(e1, e2, e3)	\
+	volatile unsigned short e1;volatile unsigned char e2, e3
+#define endian_def_b2s(e1, e2, e3)	\
+	volatile unsigned char e1, e2;volatile unsigned short e3
+#define endian_def_b4(e1, e2, e3, e4)	\
+	volatile unsigned char e1, e2, e3, e4
+#else
+#define endian_def_s2(e1, e2)	\
+	volatile unsigned short e2, e1
+#define endian_def_sb2(e1, e2, e3)	\
+	volatile unsigned char e3, e2;volatile unsigned short e1
+#define endian_def_b2s(e1, e2, e3)	\
+	volatile unsigned short e3;volatile unsigned char e2, e1
+#define endian_def_b4(e1, e2, e3, e4)	\
+	volatile unsigned char e4, e3, e2, e1
+#endif
+
+struct tx3927_pcic_reg {
+	endian_def_s2(did, vid);
+	endian_def_s2(pcistat, pcicmd);
+	endian_def_b4(cc, scc, rpli, rid);
+	endian_def_b4(unused0, ht, mlt, cls);
+	volatile unsigned long ioba;		/* +10 */
+	volatile unsigned long mba;
+	volatile unsigned long unused1[5];
+	endian_def_s2(svid, ssvid);
+	volatile unsigned long unused2;		/* +30 */
+	endian_def_sb2(unused3, unused4, capptr);
+	volatile unsigned long unused5;
+	endian_def_b4(ml, mg, ip, il);
+	volatile unsigned long unused6;		/* +40 */
+	volatile unsigned long istat;
+	volatile unsigned long iim;
+	volatile unsigned long rrt;
+	volatile unsigned long unused7[3];		/* +50 */
+	volatile unsigned long ipbmma;
+	volatile unsigned long ipbioma;		/* +60 */
+	volatile unsigned long ilbmma;
+	volatile unsigned long ilbioma;
+	volatile unsigned long unused8[9];
+	volatile unsigned long tc;		/* +90 */
+	volatile unsigned long tstat;
+	volatile unsigned long tim;
+	volatile unsigned long tccmd;
+	volatile unsigned long pcirrt;		/* +a0 */
+	volatile unsigned long pcirrt_cmd;
+	volatile unsigned long pcirrdt;
+	volatile unsigned long unused9[3];
+	volatile unsigned long tlboap;
+	volatile unsigned long tlbiap;
+	volatile unsigned long tlbmma;		/* +c0 */
+	volatile unsigned long tlbioma;
+	volatile unsigned long sc_msg;
+	volatile unsigned long sc_be;
+	volatile unsigned long tbl;		/* +d0 */
+	volatile unsigned long unused10[3];
+	volatile unsigned long pwmng;		/* +e0 */
+	volatile unsigned long pwmngs;
+	volatile unsigned long unused11[6];
+	volatile unsigned long req_trace;		/* +100 */
+	volatile unsigned long pbapmc;
+	volatile unsigned long pbapms;
+	volatile unsigned long pbapmim;
+	volatile unsigned long bm;		/* +110 */
+	volatile unsigned long cpcibrs;
+	volatile unsigned long cpcibgs;
+	volatile unsigned long pbacs;
+	volatile unsigned long iobas;		/* +120 */
+	volatile unsigned long mbas;
+	volatile unsigned long lbc;
+	volatile unsigned long lbstat;
+	volatile unsigned long lbim;		/* +130 */
+	volatile unsigned long pcistatim;
+	volatile unsigned long ica;
+	volatile unsigned long icd;
+	volatile unsigned long iiadp;		/* +140 */
+	volatile unsigned long iscdp;
+	volatile unsigned long mmas;
+	volatile unsigned long iomas;
+	volatile unsigned long ipciaddr;		/* +150 */
+	volatile unsigned long ipcidata;
+	volatile unsigned long ipcibe;
+};
+
+struct tx3927_ccfg_reg {
+	volatile unsigned long ccfg;
+	volatile unsigned long crir;
+	volatile unsigned long pcfg;
+	volatile unsigned long tear;
+	volatile unsigned long pdcr;
+};
+
+/*
+ * SDRAMC
+ */
+
+/*
+ * ROMC
+ */
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX3927_DMA_MCR_EIS(ch)	(0x10000000<<(ch))
+#define TX3927_DMA_MCR_DIS(ch)	(0x01000000<<(ch))
+#define TX3927_DMA_MCR_RSFIF	0x00000080
+#define TX3927_DMA_MCR_FIFUM(ch)	(0x00000008<<(ch))
+#define TX3927_DMA_MCR_LE	0x00000004
+#define TX3927_DMA_MCR_RPRT	0x00000002
+#define TX3927_DMA_MCR_MSTEN	0x00000001
+
+/* bits for CCRn */
+#define TX3927_DMA_CCR_DBINH	0x04000000
+#define TX3927_DMA_CCR_SBINH	0x02000000
+#define TX3927_DMA_CCR_CHRST	0x01000000
+#define TX3927_DMA_CCR_RVBYTE	0x00800000
+#define TX3927_DMA_CCR_ACKPOL	0x00400000
+#define TX3927_DMA_CCR_REQPL	0x00200000
+#define TX3927_DMA_CCR_EGREQ	0x00100000
+#define TX3927_DMA_CCR_CHDN	0x00080000
+#define TX3927_DMA_CCR_DNCTL	0x00060000
+#define TX3927_DMA_CCR_EXTRQ	0x00010000
+#define TX3927_DMA_CCR_INTRQD	0x0000e000
+#define TX3927_DMA_CCR_INTENE	0x00001000
+#define TX3927_DMA_CCR_INTENC	0x00000800
+#define TX3927_DMA_CCR_INTENT	0x00000400
+#define TX3927_DMA_CCR_CHNEN	0x00000200
+#define TX3927_DMA_CCR_XFACT	0x00000100
+#define TX3927_DMA_CCR_SNOP	0x00000080
+#define TX3927_DMA_CCR_DSTINC	0x00000040
+#define TX3927_DMA_CCR_SRCINC	0x00000020
+#define TX3927_DMA_CCR_XFSZ(order)	(((order) << 2) & 0x0000001c)
+#define TX3927_DMA_CCR_XFSZ_1W	TX3927_DMA_CCR_XFSZ(2)
+#define TX3927_DMA_CCR_XFSZ_4W	TX3927_DMA_CCR_XFSZ(4)
+#define TX3927_DMA_CCR_XFSZ_8W	TX3927_DMA_CCR_XFSZ(5)
+#define TX3927_DMA_CCR_XFSZ_16W	TX3927_DMA_CCR_XFSZ(6)
+#define TX3927_DMA_CCR_XFSZ_32W	TX3927_DMA_CCR_XFSZ(7)
+#define TX3927_DMA_CCR_MEMIO	0x00000002
+#define TX3927_DMA_CCR_ONEAD	0x00000001
+
+/* bits for CSRn */
+#define TX3927_DMA_CSR_CHNACT	0x00000100
+#define TX3927_DMA_CSR_ABCHC	0x00000080
+#define TX3927_DMA_CSR_NCHNC	0x00000040
+#define TX3927_DMA_CSR_NTRNFC	0x00000020
+#define TX3927_DMA_CSR_EXTDN	0x00000010
+#define TX3927_DMA_CSR_CFERR	0x00000008
+#define TX3927_DMA_CSR_CHERR	0x00000004
+#define TX3927_DMA_CSR_DESERR	0x00000002
+#define TX3927_DMA_CSR_SORERR	0x00000001
+
+/*
+ * IRC
+ */
+#define TX3927_IR_INT0	0
+#define TX3927_IR_INT1	1
+#define TX3927_IR_INT2	2
+#define TX3927_IR_INT3	3
+#define TX3927_IR_INT4	4
+#define TX3927_IR_INT5	5
+#define TX3927_IR_SIO0	6
+#define TX3927_IR_SIO1	7
+#define TX3927_IR_SIO(ch)	(6 + (ch))
+#define TX3927_IR_DMA	8
+#define TX3927_IR_PIO	9
+#define TX3927_IR_PCI	10
+#define TX3927_IR_TMR(ch)	(13 + (ch))
+#define TX3927_NUM_IR	16
+
+/*
+ * PCIC
+ */
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci.h */
+#define PCI_STATUS_NEW_CAP	0x0010
+
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
+/* bits for TC */
+#define TX3927_PCIC_TC_OF16E	0x00000020
+#define TX3927_PCIC_TC_IF8E	0x00000010
+#define TX3927_PCIC_TC_OF8E	0x00000008
+
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
+
+/* bits for PBAPMC */
+#define TX3927_PCIC_PBAPMC_RPBA	0x00000004
+#define TX3927_PCIC_PBAPMC_PBAEN	0x00000002
+#define TX3927_PCIC_PBAPMC_BMCEN	0x00000001
+
+/* bits for LBSTAT/LBIM */
+#define TX3927_PCIC_LBIM_ALL	0x0000003e
+
+/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX3927_PCIC_PCISTATIM_ALL	0x0000f900
+
+/* bits for LBC */
+#define TX3927_PCIC_LBC_IBSE	0x00004000
+#define TX3927_PCIC_LBC_TIBSE	0x00002000
+#define TX3927_PCIC_LBC_TMFBSE	0x00001000
+#define TX3927_PCIC_LBC_HRST	0x00000800
+#define TX3927_PCIC_LBC_SRST	0x00000400
+#define TX3927_PCIC_LBC_EPCAD	0x00000200
+#define TX3927_PCIC_LBC_MSDSE	0x00000100
+#define TX3927_PCIC_LBC_CRR	0x00000080
+#define TX3927_PCIC_LBC_ILMDE	0x00000040
+#define TX3927_PCIC_LBC_ILIDE	0x00000020
+
+#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad)	((ad) - 11)
+#define TX3927_PCIC_MAX_DEVNU	TX3927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX3927_CCFG_TLBOFF	0x00020000
+#define TX3927_CCFG_BEOW	0x00010000
+#define TX3927_CCFG_WR	0x00008000
+#define TX3927_CCFG_TOE	0x00004000
+#define TX3927_CCFG_PCIXARB	0x00002000
+#define TX3927_CCFG_PCI3	0x00001000
+#define TX3927_CCFG_PSNP	0x00000800
+#define TX3927_CCFG_PPRI	0x00000400
+#define TX3927_CCFG_PLLM	0x00000030
+#define TX3927_CCFG_ENDIAN	0x00000004
+#define TX3927_CCFG_HALT	0x00000002
+#define TX3927_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX3927_PCFG_SYSCLKEN	0x08000000
+#define TX3927_PCFG_SDRCLKEN_ALL	0x07c00000
+#define TX3927_PCFG_SDRCLKEN(ch)	(0x00400000<<(ch))
+#define TX3927_PCFG_PCICLKEN_ALL	0x003c0000
+#define TX3927_PCFG_PCICLKEN(ch)	(0x00040000<<(ch))
+#define TX3927_PCFG_SELALL	0x0003ffff
+#define TX3927_PCFG_SELCS	0x00020000
+#define TX3927_PCFG_SELDSF	0x00010000
+#define TX3927_PCFG_SELSIOC_ALL	0x0000c000
+#define TX3927_PCFG_SELSIOC(ch)	(0x00004000<<(ch))
+#define TX3927_PCFG_SELSIO_ALL	0x00003000
+#define TX3927_PCFG_SELSIO(ch)	(0x00001000<<(ch))
+#define TX3927_PCFG_SELTMR_ALL	0x00000e00
+#define TX3927_PCFG_SELTMR(ch)	(0x00000200<<(ch))
+#define TX3927_PCFG_SELDONE	0x00000100
+#define TX3927_PCFG_INTDMA_ALL	0x000000f0
+#define TX3927_PCFG_INTDMA(ch)	(0x00000010<<(ch))
+#define TX3927_PCFG_SELDMA_ALL	0x0000000f
+#define TX3927_PCFG_SELDMA(ch)	(0x00000001<<(ch))
+
+#define tx3927_sdramcptr	((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG)
+#define tx3927_romcptr		((struct tx3927_romc_reg *)TX3927_ROMC_REG)
+#define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
+#define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
+#define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
+#define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
+#define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
+
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+#define TX3927_ROMC_WIDTH(ch)	(32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
+struct pci_controller;
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
+void tx3927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX3927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h
new file mode 100644
index 0000000..7d813f1
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927.h
@@ -0,0 +1,269 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2006 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_TX4927_H
+#define __ASM_TXX9_TX4927_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4927pcic.h>
+
+#ifdef CONFIG_64BIT
+#define TX4927_REG_BASE	0xffffffffff1f0000UL
+#else
+#define TX4927_REG_BASE	0xff1f0000UL
+#endif
+#define TX4927_REG_SIZE	0x00010000
+
+#define TX4927_SDRAMC_REG	(TX4927_REG_BASE + 0x8000)
+#define TX4927_EBUSC_REG	(TX4927_REG_BASE + 0x9000)
+#define TX4927_PCIC_REG		(TX4927_REG_BASE + 0xd000)
+#define TX4927_CCFG_REG		(TX4927_REG_BASE + 0xe000)
+#define TX4927_IRC_REG		(TX4927_REG_BASE + 0xf600)
+#define TX4927_NR_TMR	3
+#define TX4927_TMR_REG(ch)	(TX4927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX4927_NR_SIO	2
+#define TX4927_SIO_REG(ch)	(TX4927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX4927_PIO_REG		(TX4927_REG_BASE + 0xf500)
+
+#define TX4927_IR_ECCERR	0
+#define TX4927_IR_WTOERR	1
+#define TX4927_NUM_IR_INT	6
+#define TX4927_IR_INT(n)	(2 + (n))
+#define TX4927_NUM_IR_SIO	2
+#define TX4927_IR_SIO(n)	(8 + (n))
+#define TX4927_NUM_IR_DMA	4
+#define TX4927_IR_DMA(n)	(10 + (n))
+#define TX4927_IR_PIO		14
+#define TX4927_IR_PDMAC		15
+#define TX4927_IR_PCIC		16
+#define TX4927_NUM_IR_TMR	3
+#define TX4927_IR_TMR(n)	(17 + (n))
+#define TX4927_IR_PCIERR	22
+#define TX4927_IR_PCIPME	23
+#define TX4927_IR_ACLC		24
+#define TX4927_IR_ACLCPME	25
+#define TX4927_NUM_IR	32
+
+#define TX4927_IRC_INT	2	/* IP[2] in Status register */
+
+#define TX4927_NUM_PIO	16
+
+struct tx4927_sdramc_reg {
+	u64 cr[4];
+	u64 unused0[4];
+	u64 tr;
+	u64 unused1[2];
+	u64 cmd;
+};
+
+struct tx4927_ebusc_reg {
+	u64 cr[8];
+};
+
+struct tx4927_ccfg_reg {
+	u64 ccfg;
+	u64 crir;
+	u64 pcfg;
+	u64 toea;
+	u64 clkctr;
+	u64 unused0;
+	u64 garbc;
+	u64 unused1;
+	u64 unused2;
+	u64 ramp;
+};
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4927_CCFG_WDRST	0x0000020000000000ULL
+#define TX4927_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4927_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4927_CCFG_TINTDIS	0x01000000
+#define TX4927_CCFG_PCI66	0x00800000
+#define TX4927_CCFG_PCIMODE	0x00400000
+#define TX4927_CCFG_DIVMODE_MASK	0x000e0000
+#define TX4927_CCFG_DIVMODE_8	(0x0 << 17)
+#define TX4927_CCFG_DIVMODE_12	(0x1 << 17)
+#define TX4927_CCFG_DIVMODE_16	(0x2 << 17)
+#define TX4927_CCFG_DIVMODE_10	(0x3 << 17)
+#define TX4927_CCFG_DIVMODE_2	(0x4 << 17)
+#define TX4927_CCFG_DIVMODE_3	(0x5 << 17)
+#define TX4927_CCFG_DIVMODE_4	(0x6 << 17)
+#define TX4927_CCFG_DIVMODE_2_5	(0x7 << 17)
+#define TX4927_CCFG_BEOW	0x00010000
+#define TX4927_CCFG_WR	0x00008000
+#define TX4927_CCFG_TOE	0x00004000
+#define TX4927_CCFG_PCIARB	0x00002000
+#define TX4927_CCFG_PCIDIVMODE_MASK	0x00001800
+#define TX4927_CCFG_PCIDIVMODE_2_5	0x00000000
+#define TX4927_CCFG_PCIDIVMODE_3	0x00000800
+#define TX4927_CCFG_PCIDIVMODE_5	0x00001000
+#define TX4927_CCFG_PCIDIVMODE_6	0x00001800
+#define TX4927_CCFG_SYSSP_MASK	0x000000c0
+#define TX4927_CCFG_ENDIAN	0x00000004
+#define TX4927_CCFG_HALT	0x00000002
+#define TX4927_CCFG_ACEHOLD	0x00000001
+#define TX4927_CCFG_W1CBITS	(TX4927_CCFG_WDRST | TX4927_CCFG_BEOW)
+
+/* PCFG : Pin Configuration */
+#define TX4927_PCFG_SDCLKDLY_MASK	0x30000000
+#define TX4927_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4927_PCFG_SYSCLKEN	0x08000000
+#define TX4927_PCFG_SDCLKEN_ALL	0x07800000
+#define TX4927_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4927_PCFG_PCICLKEN_ALL	0x003f0000
+#define TX4927_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4927_PCFG_SEL2	0x00000200
+#define TX4927_PCFG_SEL1	0x00000100
+#define TX4927_PCFG_DMASEL_ALL	0x000000ff
+#define TX4927_PCFG_DMASEL0_MASK	0x00000003
+#define TX4927_PCFG_DMASEL1_MASK	0x0000000c
+#define TX4927_PCFG_DMASEL2_MASK	0x00000030
+#define TX4927_PCFG_DMASEL3_MASK	0x000000c0
+#define TX4927_PCFG_DMASEL0_DRQ0	0x00000000
+#define TX4927_PCFG_DMASEL0_SIO1	0x00000001
+#define TX4927_PCFG_DMASEL0_ACL0	0x00000002
+#define TX4927_PCFG_DMASEL0_ACL2	0x00000003
+#define TX4927_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4927_PCFG_DMASEL1_SIO1	0x00000004
+#define TX4927_PCFG_DMASEL1_ACL1	0x00000008
+#define TX4927_PCFG_DMASEL1_ACL3	0x0000000c
+#define TX4927_PCFG_DMASEL2_DRQ2	0x00000000	/* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_SIO0	0x00000010	/* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_ACL1	0x00000000	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL2	0x00000020	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL0	0x00000030	/* SEL2=1 */
+#define TX4927_PCFG_DMASEL3_DRQ3	0x00000000
+#define TX4927_PCFG_DMASEL3_SIO0	0x00000040
+#define TX4927_PCFG_DMASEL3_ACL3	0x00000080
+#define TX4927_PCFG_DMASEL3_ACL1	0x000000c0
+
+/* CLKCTR : Clock Control */
+#define TX4927_CLKCTR_ACLCKD	0x02000000
+#define TX4927_CLKCTR_PIOCKD	0x01000000
+#define TX4927_CLKCTR_DMACKD	0x00800000
+#define TX4927_CLKCTR_PCICKD	0x00400000
+#define TX4927_CLKCTR_TM0CKD	0x00100000
+#define TX4927_CLKCTR_TM1CKD	0x00080000
+#define TX4927_CLKCTR_TM2CKD	0x00040000
+#define TX4927_CLKCTR_SIO0CKD	0x00020000
+#define TX4927_CLKCTR_SIO1CKD	0x00010000
+#define TX4927_CLKCTR_ACLRST	0x00000200
+#define TX4927_CLKCTR_PIORST	0x00000100
+#define TX4927_CLKCTR_DMARST	0x00000080
+#define TX4927_CLKCTR_PCIRST	0x00000040
+#define TX4927_CLKCTR_TM0RST	0x00000010
+#define TX4927_CLKCTR_TM1RST	0x00000008
+#define TX4927_CLKCTR_TM2RST	0x00000004
+#define TX4927_CLKCTR_SIO0RST	0x00000002
+#define TX4927_CLKCTR_SIO1RST	0x00000001
+
+#define tx4927_sdramcptr \
+		((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG)
+#define tx4927_pcicptr \
+		((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG)
+#define tx4927_ccfgptr \
+		((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG)
+#define tx4927_ebuscptr \
+		((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG)
+#define tx4927_pioptr		((struct txx9_pio_reg __iomem *)TX4927_PIO_REG)
+
+#define TX4927_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16)
+
+#define TX4927_SDRAMC_CR(ch)	__raw_readq(&tx4927_sdramcptr->cr[(ch)])
+#define TX4927_SDRAMC_BA(ch)	((TX4927_SDRAMC_CR(ch) >> 49) << 21)
+#define TX4927_SDRAMC_SIZE(ch)	\
+	((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21)
+
+#define TX4927_EBUSC_CR(ch)	__raw_readq(&tx4927_ebuscptr->cr[(ch)])
+#define TX4927_EBUSC_BA(ch)	((TX4927_EBUSC_CR(ch) >> 48) << 20)
+#define TX4927_EBUSC_SIZE(ch)	\
+	(0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf))
+#define TX4927_EBUSC_WIDTH(ch)	\
+	(64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3))
+
+/* utilities */
+static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+	unsigned long flags;
+	local_irq_save(flags);
+#endif
+	____raw_writeq(____raw_readq(adr) & ~bits, adr);
+#ifdef CONFIG_32BIT
+	local_irq_restore(flags);
+#endif
+}
+static inline void txx9_set64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+	unsigned long flags;
+	local_irq_save(flags);
+#endif
+	____raw_writeq(____raw_readq(adr) | bits, adr);
+#ifdef CONFIG_32BIT
+	local_irq_restore(flags);
+#endif
+}
+
+/* These functions are not interrupt safe. */
+static inline void tx4927_ccfg_clear(__u64 bits)
+{
+	____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg)
+		       & ~(TX4927_CCFG_W1CBITS | bits),
+		       &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_set(__u64 bits)
+{
+	____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+			& ~TX4927_CCFG_W1CBITS) | bits,
+		       &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_change(__u64 change, __u64 new)
+{
+	____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+			& ~(TX4927_CCFG_W1CBITS | change)) |
+		       new,
+		       &tx4927_ccfgptr->ccfg);
+}
+
+unsigned int tx4927_get_mem_size(void);
+void tx4927_wdt_init(void);
+void tx4927_setup(void);
+void tx4927_time_init(unsigned int tmrnr);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
+int tx4927_report_pciclk(void);
+int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
+void tx4927_irq_init(void);
+void tx4927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX4927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h
new file mode 100644
index 0000000..c470b8a
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927pcic.h
@@ -0,0 +1,203 @@
+/*
+ * include/asm-mips/txx9/tx4927pcic.h
+ * TX4927 PCI controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_TX4927PCIC_H
+#define __ASM_TXX9_TX4927PCIC_H
+
+#include <linux/pci.h>
+#include <linux/irqreturn.h>
+
+struct tx4927_pcic_reg {
+	u32 pciid;
+	u32 pcistatus;
+	u32 pciccrev;
+	u32 pcicfg1;
+	u32 p2gm0plbase;		/* +10 */
+	u32 p2gm0pubase;
+	u32 p2gm1plbase;
+	u32 p2gm1pubase;
+	u32 p2gm2pbase;		/* +20 */
+	u32 p2giopbase;
+	u32 unused0;
+	u32 pcisid;
+	u32 unused1;		/* +30 */
+	u32 pcicapptr;
+	u32 unused2;
+	u32 pcicfg2;
+	u32 g2ptocnt;		/* +40 */
+	u32 unused3[15];
+	u32 g2pstatus;		/* +80 */
+	u32 g2pmask;
+	u32 pcisstatus;
+	u32 pcimask;
+	u32 p2gcfg;		/* +90 */
+	u32 p2gstatus;
+	u32 p2gmask;
+	u32 p2gccmd;
+	u32 unused4[24];		/* +a0 */
+	u32 pbareqport;		/* +100 */
+	u32 pbacfg;
+	u32 pbastatus;
+	u32 pbamask;
+	u32 pbabm;		/* +110 */
+	u32 pbacreq;
+	u32 pbacgnt;
+	u32 pbacstate;
+	u64 g2pmgbase[3];		/* +120 */
+	u64 g2piogbase;
+	u32 g2pmmask[3];		/* +140 */
+	u32 g2piomask;
+	u64 g2pmpbase[3];		/* +150 */
+	u64 g2piopbase;
+	u32 pciccfg;		/* +170 */
+	u32 pcicstatus;
+	u32 pcicmask;
+	u32 unused5;
+	u64 p2gmgbase[3];		/* +180 */
+	u64 p2giogbase;
+	u32 g2pcfgadrs;		/* +1a0 */
+	u32 g2pcfgdata;
+	u32 unused6[8];
+	u32 g2pintack;
+	u32 g2pspc;
+	u32 unused7[12];		/* +1d0 */
+	u64 pdmca;		/* +200 */
+	u64 pdmga;
+	u64 pdmpa;
+	u64 pdmctr;
+	u64 pdmcfg;		/* +220 */
+	u64 pdmsts;
+};
+
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci_regs.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci_regs.h */
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4927_PCIC_G2PSTATUS_ALL	0x00000003
+#define TX4927_PCIC_G2PSTATUS_TTOE	0x00000002
+#define TX4927_PCIC_G2PSTATUS_RTOE	0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */
+#define TX4927_PCIC_PCISTATUS_ALL	0x0000f900
+
+/* bits for PBACFG */
+#define TX4927_PCIC_PBACFG_FIXPA	0x00000008
+#define TX4927_PCIC_PBACFG_RPBA	0x00000004
+#define TX4927_PCIC_PBACFG_PBAEN	0x00000002
+#define TX4927_PCIC_PBACFG_BMCEN	0x00000001
+
+/* bits for PBASTATUS/PBAMASK */
+#define TX4927_PCIC_PBASTATUS_ALL	0x00000001
+#define TX4927_PCIC_PBASTATUS_BM	0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4927_PCIC_G2PMnGBASE_BSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_G2PMnGBASE_ECHG	0x0000001000000000ULL
+
+/* bits for G2PIOGBASE */
+#define TX4927_PCIC_G2PIOGBASE_BSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_G2PIOGBASE_ECHG	0x0000001000000000ULL
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4927_PCIC_PCICSTATUS_ALL	0x000007b8
+#define TX4927_PCIC_PCICSTATUS_PME	0x00000400
+#define TX4927_PCIC_PCICSTATUS_TLB	0x00000200
+#define TX4927_PCIC_PCICSTATUS_NIB	0x00000100
+#define TX4927_PCIC_PCICSTATUS_ZIB	0x00000080
+#define TX4927_PCIC_PCICSTATUS_PERR	0x00000020
+#define TX4927_PCIC_PCICSTATUS_SERR	0x00000010
+#define TX4927_PCIC_PCICSTATUS_GBE	0x00000008
+#define TX4927_PCIC_PCICSTATUS_IWB	0x00000002
+#define TX4927_PCIC_PCICSTATUS_E2PDONE	0x00000001
+
+/* bits for PCICCFG */
+#define TX4927_PCIC_PCICCFG_GBWC_MASK	0x0fff0000
+#define TX4927_PCIC_PCICCFG_HRST	0x00000800
+#define TX4927_PCIC_PCICCFG_SRST	0x00000400
+#define TX4927_PCIC_PCICCFG_IRBER	0x00000200
+#define TX4927_PCIC_PCICCFG_G2PMEN(ch)	(0x00000100>>(ch))
+#define TX4927_PCIC_PCICCFG_G2PM0EN	0x00000100
+#define TX4927_PCIC_PCICCFG_G2PM1EN	0x00000080
+#define TX4927_PCIC_PCICCFG_G2PM2EN	0x00000040
+#define TX4927_PCIC_PCICCFG_G2PIOEN	0x00000020
+#define TX4927_PCIC_PCICCFG_TCAR	0x00000010
+#define TX4927_PCIC_PCICCFG_ICAEN	0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4927_PCIC_P2GMnGBASE_TMEMEN	0x0000004000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TBSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TECHG	0x0000001000000000ULL
+
+/* bits for P2GIOGBASE */
+#define TX4927_PCIC_P2GIOGBASE_TIOEN	0x0000004000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TBSDIS	0x0000002000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TECHG	0x0000001000000000ULL
+
+#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad)	((ad) - 11)
+#define TX4927_PCIC_MAX_DEVNU	TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4927_PCIC_PDMCFG_RSTFIFO	0x00200000
+#define TX4927_PCIC_PDMCFG_EXFER	0x00100000
+#define TX4927_PCIC_PDMCFG_REQDLY_MASK	0x00003800
+#define TX4927_PCIC_PDMCFG_REQDLY_NONE	(0 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_16	(1 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_32	(2 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_64	(3 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_128	(4 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_256	(5 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_512	(6 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_1024	(7 << 11)
+#define TX4927_PCIC_PDMCFG_ERRIE	0x00000400
+#define TX4927_PCIC_PDMCFG_NCCMPIE	0x00000200
+#define TX4927_PCIC_PDMCFG_NTCMPIE	0x00000100
+#define TX4927_PCIC_PDMCFG_CHNEN	0x00000080
+#define TX4927_PCIC_PDMCFG_XFRACT	0x00000040
+#define TX4927_PCIC_PDMCFG_BSWAP	0x00000020
+#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK	0x0000000c
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW	0x00000000
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW	0x00000004
+#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW	0x00000008
+#define TX4927_PCIC_PDMCFG_XFRDIRC	0x00000002
+#define TX4927_PCIC_PDMCFG_CHRST	0x00000001
+
+/* bits for PDMSTS */
+#define TX4927_PCIC_PDMSTS_REQCNT_MASK	0x3f000000
+#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK	0x00f00000
+#define TX4927_PCIC_PDMSTS_FIFOWP_MASK	0x000c0000
+#define TX4927_PCIC_PDMSTS_FIFORP_MASK	0x00030000
+#define TX4927_PCIC_PDMSTS_ERRINT	0x00000800
+#define TX4927_PCIC_PDMSTS_DONEINT	0x00000400
+#define TX4927_PCIC_PDMSTS_CHNEN	0x00000200
+#define TX4927_PCIC_PDMSTS_XFRACT	0x00000100
+#define TX4927_PCIC_PDMSTS_ACCMP	0x00000080
+#define TX4927_PCIC_PDMSTS_NCCMP	0x00000040
+#define TX4927_PCIC_PDMSTS_NTCMP	0x00000020
+#define TX4927_PCIC_PDMSTS_CFGERR	0x00000008
+#define TX4927_PCIC_PDMSTS_PCIERR	0x00000004
+#define TX4927_PCIC_PDMSTS_CHNERR	0x00000002
+#define TX4927_PCIC_PDMSTS_DATAERR	0x00000001
+#define TX4927_PCIC_PDMSTS_ALL_CMP	0x000000e0
+#define TX4927_PCIC_PDMSTS_ALL_ERR	0x0000000f
+
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+	struct pci_controller *channel);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
+void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
+
+#endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
new file mode 100644
index 0000000..989e775
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -0,0 +1,295 @@
+/*
+ * Definitions for TX4937/TX4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_TX4938_H
+#define __ASM_TXX9_TX4938_H
+
+/* some controllers are compatible with 4927 */
+#include <asm/txx9/tx4927.h>
+
+#ifdef CONFIG_64BIT
+#define TX4938_REG_BASE	0xffffffffff1f0000UL /* == TX4937_REG_BASE */
+#else
+#define TX4938_REG_BASE	0xff1f0000UL /* == TX4937_REG_BASE */
+#endif
+#define TX4938_REG_SIZE	0x00010000 /* == TX4937_REG_SIZE */
+
+/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
+#define TX4938_NDFMC_REG	(TX4938_REG_BASE + 0x5000)
+#define TX4938_SRAMC_REG	(TX4938_REG_BASE + 0x6000)
+#define TX4938_PCIC1_REG	(TX4938_REG_BASE + 0x7000)
+#define TX4938_SDRAMC_REG	(TX4938_REG_BASE + 0x8000)
+#define TX4938_EBUSC_REG	(TX4938_REG_BASE + 0x9000)
+#define TX4938_DMA_REG(ch)	(TX4938_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4938_PCIC_REG		(TX4938_REG_BASE + 0xd000)
+#define TX4938_CCFG_REG		(TX4938_REG_BASE + 0xe000)
+#define TX4938_NR_TMR	3
+#define TX4938_TMR_REG(ch)	((TX4938_REG_BASE + 0xf000) + (ch) * 0x100)
+#define TX4938_NR_SIO	2
+#define TX4938_SIO_REG(ch)	((TX4938_REG_BASE + 0xf300) + (ch) * 0x100)
+#define TX4938_PIO_REG		(TX4938_REG_BASE + 0xf500)
+#define TX4938_IRC_REG		(TX4938_REG_BASE + 0xf600)
+#define TX4938_ACLC_REG		(TX4938_REG_BASE + 0xf700)
+#define TX4938_SPI_REG		(TX4938_REG_BASE + 0xf800)
+
+struct tx4938_sramc_reg {
+	u64 cr;
+};
+
+struct tx4938_ccfg_reg {
+	u64 ccfg;
+	u64 crir;
+	u64 pcfg;
+	u64 toea;
+	u64 clkctr;
+	u64 unused0;
+	u64 garbc;
+	u64 unused1;
+	u64 unused2;
+	u64 ramp;
+	u64 unused3;
+	u64 jmpadr;
+};
+
+/*
+ * IRC
+ */
+
+#define TX4938_IR_ECCERR	0
+#define TX4938_IR_WTOERR	1
+#define TX4938_NUM_IR_INT	6
+#define TX4938_IR_INT(n)	(2 + (n))
+#define TX4938_NUM_IR_SIO	2
+#define TX4938_IR_SIO(n)	(8 + (n))
+#define TX4938_NUM_IR_DMA	4
+#define TX4938_IR_DMA(ch, n)	((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */
+#define TX4938_IR_PIO	14
+#define TX4938_IR_PDMAC	15
+#define TX4938_IR_PCIC	16
+#define TX4938_NUM_IR_TMR	3
+#define TX4938_IR_TMR(n)	(17 + (n))
+#define TX4938_IR_NDFMC	21
+#define TX4938_IR_PCIERR	22
+#define TX4938_IR_PCIPME	23
+#define TX4938_IR_ACLC	24
+#define TX4938_IR_ACLCPME	25
+#define TX4938_IR_PCIC1	26
+#define TX4938_IR_SPI	31
+#define TX4938_NUM_IR	32
+/* multiplex */
+#define TX4938_IR_ETH0	TX4938_IR_INT(4)
+#define TX4938_IR_ETH1	TX4938_IR_INT(3)
+
+#define TX4938_IRC_INT	2	/* IP[2] in Status register */
+
+#define TX4938_NUM_PIO	16
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4938_CCFG_WDRST	0x0000020000000000ULL
+#define TX4938_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4938_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4938_CCFG_TINTDIS	0x01000000
+#define TX4938_CCFG_PCI66	0x00800000
+#define TX4938_CCFG_PCIMODE	0x00400000
+#define TX4938_CCFG_PCI1_66	0x00200000
+#define TX4938_CCFG_DIVMODE_MASK	0x001e0000
+#define TX4938_CCFG_DIVMODE_2	(0x4 << 17)
+#define TX4938_CCFG_DIVMODE_2_5	(0xf << 17)
+#define TX4938_CCFG_DIVMODE_3	(0x5 << 17)
+#define TX4938_CCFG_DIVMODE_4	(0x6 << 17)
+#define TX4938_CCFG_DIVMODE_4_5	(0xd << 17)
+#define TX4938_CCFG_DIVMODE_8	(0x0 << 17)
+#define TX4938_CCFG_DIVMODE_10	(0xb << 17)
+#define TX4938_CCFG_DIVMODE_12	(0x1 << 17)
+#define TX4938_CCFG_DIVMODE_16	(0x2 << 17)
+#define TX4938_CCFG_DIVMODE_18	(0x9 << 17)
+#define TX4938_CCFG_BEOW	0x00010000
+#define TX4938_CCFG_WR	0x00008000
+#define TX4938_CCFG_TOE	0x00004000
+#define TX4938_CCFG_PCIARB	0x00002000
+#define TX4938_CCFG_PCIDIVMODE_MASK	0x00001c00
+#define TX4938_CCFG_PCIDIVMODE_4	(0x1 << 10)
+#define TX4938_CCFG_PCIDIVMODE_4_5	(0x3 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5	(0x5 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5_5	(0x7 << 10)
+#define TX4938_CCFG_PCIDIVMODE_8	(0x0 << 10)
+#define TX4938_CCFG_PCIDIVMODE_9	(0x2 << 10)
+#define TX4938_CCFG_PCIDIVMODE_10	(0x4 << 10)
+#define TX4938_CCFG_PCIDIVMODE_11	(0x6 << 10)
+#define TX4938_CCFG_PCI1DMD	0x00000100
+#define TX4938_CCFG_SYSSP_MASK	0x000000c0
+#define TX4938_CCFG_ENDIAN	0x00000004
+#define TX4938_CCFG_HALT	0x00000002
+#define TX4938_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4938_PCFG_ETH0_SEL	0x8000000000000000ULL
+#define TX4938_PCFG_ETH1_SEL	0x4000000000000000ULL
+#define TX4938_PCFG_ATA_SEL	0x2000000000000000ULL
+#define TX4938_PCFG_ISA_SEL	0x1000000000000000ULL
+#define TX4938_PCFG_SPI_SEL	0x0800000000000000ULL
+#define TX4938_PCFG_NDF_SEL	0x0400000000000000ULL
+#define TX4938_PCFG_SDCLKDLY_MASK	0x30000000
+#define TX4938_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4938_PCFG_SYSCLKEN	0x08000000
+#define TX4938_PCFG_SDCLKEN_ALL	0x07800000
+#define TX4938_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4938_PCFG_PCICLKEN_ALL	0x003f0000
+#define TX4938_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4938_PCFG_SEL2	0x00000200
+#define TX4938_PCFG_SEL1	0x00000100
+#define TX4938_PCFG_DMASEL_ALL	0x0000000f
+#define TX4938_PCFG_DMASEL0_DRQ0	0x00000000
+#define TX4938_PCFG_DMASEL0_SIO1	0x00000001
+#define TX4938_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4938_PCFG_DMASEL1_SIO1	0x00000002
+#define TX4938_PCFG_DMASEL2_DRQ2	0x00000000
+#define TX4938_PCFG_DMASEL2_SIO0	0x00000004
+#define TX4938_PCFG_DMASEL3_DRQ3	0x00000000
+#define TX4938_PCFG_DMASEL3_SIO0	0x00000008
+
+/* CLKCTR : Clock Control */
+#define TX4938_CLKCTR_NDFCKD	0x0001000000000000ULL
+#define TX4938_CLKCTR_NDFRST	0x0000000100000000ULL
+#define TX4938_CLKCTR_ETH1CKD	0x80000000
+#define TX4938_CLKCTR_ETH0CKD	0x40000000
+#define TX4938_CLKCTR_SPICKD	0x20000000
+#define TX4938_CLKCTR_SRAMCKD	0x10000000
+#define TX4938_CLKCTR_PCIC1CKD	0x08000000
+#define TX4938_CLKCTR_DMA1CKD	0x04000000
+#define TX4938_CLKCTR_ACLCKD	0x02000000
+#define TX4938_CLKCTR_PIOCKD	0x01000000
+#define TX4938_CLKCTR_DMACKD	0x00800000
+#define TX4938_CLKCTR_PCICKD	0x00400000
+#define TX4938_CLKCTR_TM0CKD	0x00100000
+#define TX4938_CLKCTR_TM1CKD	0x00080000
+#define TX4938_CLKCTR_TM2CKD	0x00040000
+#define TX4938_CLKCTR_SIO0CKD	0x00020000
+#define TX4938_CLKCTR_SIO1CKD	0x00010000
+#define TX4938_CLKCTR_ETH1RST	0x00008000
+#define TX4938_CLKCTR_ETH0RST	0x00004000
+#define TX4938_CLKCTR_SPIRST	0x00002000
+#define TX4938_CLKCTR_SRAMRST	0x00001000
+#define TX4938_CLKCTR_PCIC1RST	0x00000800
+#define TX4938_CLKCTR_DMA1RST	0x00000400
+#define TX4938_CLKCTR_ACLRST	0x00000200
+#define TX4938_CLKCTR_PIORST	0x00000100
+#define TX4938_CLKCTR_DMARST	0x00000080
+#define TX4938_CLKCTR_PCIRST	0x00000040
+#define TX4938_CLKCTR_TM0RST	0x00000010
+#define TX4938_CLKCTR_TM1RST	0x00000008
+#define TX4938_CLKCTR_TM2RST	0x00000004
+#define TX4938_CLKCTR_SIO0RST	0x00000002
+#define TX4938_CLKCTR_SIO1RST	0x00000001
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX4938_DMA_MCR_EIS(ch)	(0x10000000<<(ch))
+#define TX4938_DMA_MCR_DIS(ch)	(0x01000000<<(ch))
+#define TX4938_DMA_MCR_RSFIF	0x00000080
+#define TX4938_DMA_MCR_FIFUM(ch)	(0x00000008<<(ch))
+#define TX4938_DMA_MCR_RPRT	0x00000002
+#define TX4938_DMA_MCR_MSTEN	0x00000001
+
+/* bits for CCRn */
+#define TX4938_DMA_CCR_IMMCHN	0x20000000
+#define TX4938_DMA_CCR_USEXFSZ	0x10000000
+#define TX4938_DMA_CCR_LE	0x08000000
+#define TX4938_DMA_CCR_DBINH	0x04000000
+#define TX4938_DMA_CCR_SBINH	0x02000000
+#define TX4938_DMA_CCR_CHRST	0x01000000
+#define TX4938_DMA_CCR_RVBYTE	0x00800000
+#define TX4938_DMA_CCR_ACKPOL	0x00400000
+#define TX4938_DMA_CCR_REQPL	0x00200000
+#define TX4938_DMA_CCR_EGREQ	0x00100000
+#define TX4938_DMA_CCR_CHDN	0x00080000
+#define TX4938_DMA_CCR_DNCTL	0x00060000
+#define TX4938_DMA_CCR_EXTRQ	0x00010000
+#define TX4938_DMA_CCR_INTRQD	0x0000e000
+#define TX4938_DMA_CCR_INTENE	0x00001000
+#define TX4938_DMA_CCR_INTENC	0x00000800
+#define TX4938_DMA_CCR_INTENT	0x00000400
+#define TX4938_DMA_CCR_CHNEN	0x00000200
+#define TX4938_DMA_CCR_XFACT	0x00000100
+#define TX4938_DMA_CCR_SMPCHN	0x00000020
+#define TX4938_DMA_CCR_XFSZ(order)	(((order) << 2) & 0x0000001c)
+#define TX4938_DMA_CCR_XFSZ_1W	TX4938_DMA_CCR_XFSZ(2)
+#define TX4938_DMA_CCR_XFSZ_2W	TX4938_DMA_CCR_XFSZ(3)
+#define TX4938_DMA_CCR_XFSZ_4W	TX4938_DMA_CCR_XFSZ(4)
+#define TX4938_DMA_CCR_XFSZ_8W	TX4938_DMA_CCR_XFSZ(5)
+#define TX4938_DMA_CCR_XFSZ_16W	TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W	TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_MEMIO	0x00000002
+#define TX4938_DMA_CCR_SNGAD	0x00000001
+
+/* bits for CSRn */
+#define TX4938_DMA_CSR_CHNEN	0x00000400
+#define TX4938_DMA_CSR_STLXFER	0x00000200
+#define TX4938_DMA_CSR_CHNACT	0x00000100
+#define TX4938_DMA_CSR_ABCHC	0x00000080
+#define TX4938_DMA_CSR_NCHNC	0x00000040
+#define TX4938_DMA_CSR_NTRNFC	0x00000020
+#define TX4938_DMA_CSR_EXTDN	0x00000010
+#define TX4938_DMA_CSR_CFERR	0x00000008
+#define TX4938_DMA_CSR_CHERR	0x00000004
+#define TX4938_DMA_CSR_DESERR	0x00000002
+#define TX4938_DMA_CSR_SORERR	0x00000001
+
+#define tx4938_sdramcptr	tx4927_sdramcptr
+#define tx4938_ebuscptr		tx4927_ebuscptr
+#define tx4938_pcicptr		tx4927_pcicptr
+#define tx4938_pcic1ptr \
+		((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr \
+		((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG)
+#define tx4938_pioptr		((struct txx9_pio_reg __iomem *)TX4938_PIO_REG)
+#define tx4938_sramcptr \
+		((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG)
+
+
+#define TX4938_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16)
+
+#define tx4938_ccfg_clear(bits)	tx4927_ccfg_clear(bits)
+#define tx4938_ccfg_set(bits)	tx4927_ccfg_set(bits)
+#define tx4938_ccfg_change(change, new)	tx4927_ccfg_change(change, new)
+
+#define TX4938_SDRAMC_CR(ch)	TX4927_SDRAMC_CR(ch)
+#define TX4938_SDRAMC_BA(ch)	TX4927_SDRAMC_BA(ch)
+#define TX4938_SDRAMC_SIZE(ch)	TX4927_SDRAMC_SIZE(ch)
+
+#define TX4938_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
+#define TX4938_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
+#define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
+#define TX4938_EBUSC_WIDTH(ch)	TX4927_EBUSC_WIDTH(ch)
+
+#define tx4938_get_mem_size() tx4927_get_mem_size()
+void tx4938_wdt_init(void);
+void tx4938_setup(void);
+void tx4938_time_init(unsigned int tmrnr);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4938_report_pciclk(void);
+void tx4938_report_pci1clk(void);
+int tx4938_pciclk66_setup(void);
+struct pci_dev;
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
+void tx4938_irq_init(void);
+void tx4938_mtd_init(int ch);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
new file mode 100644
index 0000000..7ce2dff
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -0,0 +1,544 @@
+/*
+ * Definitions for TX4939
+ *
+ * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_TX4939_H
+#define __ASM_TXX9_TX4939_H
+
+/* some controllers are compatible with 4927/4938 */
+#include <asm/txx9/tx4938.h>
+
+#ifdef CONFIG_64BIT
+#define TX4939_REG_BASE	0xffffffffff1f0000UL /* == TX4938_REG_BASE */
+#else
+#define TX4939_REG_BASE	0xff1f0000UL /* == TX4938_REG_BASE */
+#endif
+#define TX4939_REG_SIZE	0x00010000 /* == TX4938_REG_SIZE */
+
+#define TX4939_ATA_REG(ch)	(TX4939_REG_BASE + 0x3000 + (ch) * 0x1000)
+#define TX4939_NDFMC_REG	(TX4939_REG_BASE + 0x5000)
+#define TX4939_SRAMC_REG	(TX4939_REG_BASE + 0x6000)
+#define TX4939_CRYPTO_REG	(TX4939_REG_BASE + 0x6800)
+#define TX4939_PCIC1_REG	(TX4939_REG_BASE + 0x7000)
+#define TX4939_DDRC_REG		(TX4939_REG_BASE + 0x8000)
+#define TX4939_EBUSC_REG	(TX4939_REG_BASE + 0x9000)
+#define TX4939_VPC_REG		(TX4939_REG_BASE + 0xa000)
+#define TX4939_DMA_REG(ch)	(TX4939_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4939_PCIC_REG		(TX4939_REG_BASE + 0xd000)
+#define TX4939_CCFG_REG		(TX4939_REG_BASE + 0xe000)
+#define TX4939_IRC_REG		(TX4939_REG_BASE + 0xe800)
+#define TX4939_NR_TMR	6	/* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */
+#define TX4939_TMR_REG(ch)	\
+	(TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100)
+#define TX4939_NR_SIO	4	/* 0xf300, 0xf400, 0xf380, 0xf480 */
+#define TX4939_SIO_REG(ch)	\
+	(TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6))
+#define TX4939_ACLC_REG		(TX4939_REG_BASE + 0xf700)
+#define TX4939_SPI_REG		(TX4939_REG_BASE + 0xf800)
+#define TX4939_I2C_REG		(TX4939_REG_BASE + 0xf900)
+#define TX4939_I2S_REG		(TX4939_REG_BASE + 0xfa00)
+#define TX4939_RTC_REG		(TX4939_REG_BASE + 0xfb00)
+#define TX4939_CIR_REG		(TX4939_REG_BASE + 0xfc00)
+
+struct tx4939_le_reg {
+	__u32 r;
+	__u32 unused;
+};
+
+struct tx4939_ddrc_reg {
+	struct tx4939_le_reg ctl[47];
+	__u64 unused0[17];
+	__u64 winen;
+	__u64 win[4];
+};
+
+struct tx4939_ccfg_reg {
+	__u64 ccfg;
+	__u64 crir;
+	__u64 pcfg;
+	__u64 toea;
+	__u64 clkctr;
+	__u64 unused0;
+	__u64 garbc;
+	__u64 unused1[2];
+	__u64 ramp;
+	__u64 unused2[2];
+	__u64 dskwctrl;
+	__u64 mclkosc;
+	__u64 mclkctl;
+	__u64 unused3[17];
+	struct {
+		__u64 mr;
+		__u64 dr;
+	} gpio[2];
+};
+
+struct tx4939_irc_reg {
+	struct tx4939_le_reg den;
+	struct tx4939_le_reg scipb;
+	struct tx4939_le_reg dm[2];
+	struct tx4939_le_reg lvl[16];
+	struct tx4939_le_reg msk;
+	struct tx4939_le_reg edc;
+	struct tx4939_le_reg pnd0;
+	struct tx4939_le_reg cs;
+	struct tx4939_le_reg pnd1;
+	struct tx4939_le_reg dm2[2];
+	struct tx4939_le_reg dbr[2];
+	struct tx4939_le_reg dben;
+	struct tx4939_le_reg unused0[2];
+	struct tx4939_le_reg flag[2];
+	struct tx4939_le_reg pol;
+	struct tx4939_le_reg cnt;
+	struct tx4939_le_reg maskint;
+	struct tx4939_le_reg maskext;
+};
+
+struct tx4939_rtc_reg {
+	__u32 ctl;
+	__u32 adr;
+	__u32 dat;
+	__u32 tbc;
+};
+
+struct tx4939_crypto_reg {
+	struct tx4939_le_reg csr;
+	struct tx4939_le_reg idesptr;
+	struct tx4939_le_reg cdesptr;
+	struct tx4939_le_reg buserr;
+	struct tx4939_le_reg cip_tout;
+	struct tx4939_le_reg cir;
+	union {
+		struct {
+			struct tx4939_le_reg data[8];
+			struct tx4939_le_reg ctrl;
+		} gen;
+		struct {
+			struct {
+				struct tx4939_le_reg l;
+				struct tx4939_le_reg u;
+			} key[3], ini;
+			struct tx4939_le_reg ctrl;
+		} des;
+		struct {
+			struct tx4939_le_reg key[4];
+			struct tx4939_le_reg ini[4];
+			struct tx4939_le_reg ctrl;
+		} aes;
+		struct {
+			struct {
+				struct tx4939_le_reg l;
+				struct tx4939_le_reg u;
+			} cnt;
+			struct tx4939_le_reg ini[5];
+			struct tx4939_le_reg unused;
+			struct tx4939_le_reg ctrl;
+		} hash;
+	} cdr;
+	struct tx4939_le_reg unused0[7];
+	struct tx4939_le_reg rcsr;
+	struct tx4939_le_reg rpr;
+	__u64 rdr;
+	__u64 ror[3];
+	struct tx4939_le_reg unused1[2];
+	struct tx4939_le_reg xorslr;
+	struct tx4939_le_reg xorsur;
+};
+
+struct tx4939_crypto_desc {
+	__u32 src;
+	__u32 dst;
+	__u32 next;
+	__u32 ctrl;
+	__u32 index;
+	__u32 xor;
+};
+
+struct tx4939_vpc_reg {
+	struct tx4939_le_reg csr;
+	struct {
+		struct tx4939_le_reg ctrlA;
+		struct tx4939_le_reg ctrlB;
+		struct tx4939_le_reg idesptr;
+		struct tx4939_le_reg cdesptr;
+	} port[3];
+	struct tx4939_le_reg buserr;
+};
+
+struct tx4939_vpc_desc {
+	__u32 src;
+	__u32 next;
+	__u32 ctrl1;
+	__u32 ctrl2;
+};
+
+/*
+ * IRC
+ */
+#define TX4939_IR_NONE	0
+#define TX4939_IR_DDR	1
+#define TX4939_IR_WTOERR	2
+#define TX4939_NUM_IR_INT	3
+#define TX4939_IR_INT(n)	(3 + (n))
+#define TX4939_NUM_IR_ETH	2
+#define TX4939_IR_ETH(n)	((n) ? 43 : 6)
+#define TX4939_IR_VIDEO	7
+#define TX4939_IR_CIR	8
+#define TX4939_NUM_IR_SIO	4
+#define TX4939_IR_SIO(n)	((n) ? 43 + (n) : 9)	/* 9,44-46 */
+#define TX4939_NUM_IR_DMA	4
+#define TX4939_IR_DMA(ch, n)	(((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */
+#define TX4939_IR_IRC	14
+#define TX4939_IR_PDMAC	15
+#define TX4939_NUM_IR_TMR	6
+#define TX4939_IR_TMR(n)	(((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */
+#define TX4939_NUM_IR_ATA	2
+#define TX4939_IR_ATA(n)	(19 + (n))
+#define TX4939_IR_ACLC	21
+#define TX4939_IR_CIPHER	26
+#define TX4939_IR_INTA	27
+#define TX4939_IR_INTB	28
+#define TX4939_IR_INTC	29
+#define TX4939_IR_INTD	30
+#define TX4939_IR_I2C	33
+#define TX4939_IR_SPI	34
+#define TX4939_IR_PCIC	35
+#define TX4939_IR_PCIC1	36
+#define TX4939_IR_PCIERR	37
+#define TX4939_IR_PCIPME	38
+#define TX4939_IR_NDFMC	39
+#define TX4939_IR_ACLCPME	40
+#define TX4939_IR_RTC	41
+#define TX4939_IR_RND	42
+#define TX4939_IR_I2S	47
+#define TX4939_NUM_IR	64
+
+#define TX4939_IRC_INT	2	/* IP[2] in Status register */
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4939_CCFG_PCIBOOT	0x0000040000000000ULL
+#define TX4939_CCFG_WDRST	0x0000020000000000ULL
+#define TX4939_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4939_CCFG_BCFG_MASK	0x000000ff00000000ULL
+#define TX4939_CCFG_GTOT_MASK	0x06000000
+#define TX4939_CCFG_GTOT_4096	0x06000000
+#define TX4939_CCFG_GTOT_2048	0x04000000
+#define TX4939_CCFG_GTOT_1024	0x02000000
+#define TX4939_CCFG_GTOT_512	0x00000000
+#define TX4939_CCFG_TINTDIS	0x01000000
+#define TX4939_CCFG_PCI66	0x00800000
+#define TX4939_CCFG_PCIMODE	0x00400000
+#define TX4939_CCFG_SSCG	0x00100000
+#define TX4939_CCFG_MULCLK_MASK	0x000e0000
+#define TX4939_CCFG_MULCLK_8	(0x7 << 17)
+#define TX4939_CCFG_MULCLK_9	(0x0 << 17)
+#define TX4939_CCFG_MULCLK_10	(0x1 << 17)
+#define TX4939_CCFG_MULCLK_11	(0x2 << 17)
+#define TX4939_CCFG_MULCLK_12	(0x3 << 17)
+#define TX4939_CCFG_MULCLK_13	(0x4 << 17)
+#define TX4939_CCFG_MULCLK_14	(0x5 << 17)
+#define TX4939_CCFG_MULCLK_15	(0x6 << 17)
+#define TX4939_CCFG_BEOW	0x00010000
+#define TX4939_CCFG_WR	0x00008000
+#define TX4939_CCFG_TOE	0x00004000
+#define TX4939_CCFG_PCIARB	0x00002000
+#define TX4939_CCFG_YDIVMODE_MASK	0x00001c00
+#define TX4939_CCFG_YDIVMODE_2	(0x0 << 10)
+#define TX4939_CCFG_YDIVMODE_3	(0x1 << 10)
+#define TX4939_CCFG_YDIVMODE_5	(0x6 << 10)
+#define TX4939_CCFG_YDIVMODE_6	(0x7 << 10)
+#define TX4939_CCFG_PTSEL	0x00000200
+#define TX4939_CCFG_BESEL	0x00000100
+#define TX4939_CCFG_SYSSP_MASK	0x000000c0
+#define TX4939_CCFG_ACKSEL	0x00000020
+#define TX4939_CCFG_ROMW	0x00000010
+#define TX4939_CCFG_ENDIAN	0x00000004
+#define TX4939_CCFG_ARMODE	0x00000002
+#define TX4939_CCFG_ACEHOLD	0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4939_PCFG_SIO2MODE_MASK	0xc000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_GPIO	0x8000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO2	0x4000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO0	0x0000000000000000ULL
+#define TX4939_PCFG_SPIMODE	0x2000000000000000ULL
+#define TX4939_PCFG_I2CMODE	0x1000000000000000ULL
+#define TX4939_PCFG_I2SMODE_MASK	0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_GPIO	0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S	0x0800000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S_ALT	0x0400000000000000ULL
+#define TX4939_PCFG_I2SMODE_ACLC	0x0000000000000000ULL
+#define TX4939_PCFG_SIO3MODE	0x0200000000000000ULL
+#define TX4939_PCFG_DMASEL3	0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_SIO0	0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_NDFC	0x0000000000000000ULL
+#define TX4939_PCFG_VSSMODE	0x0000200000000000ULL
+#define TX4939_PCFG_VPSMODE	0x0000100000000000ULL
+#define TX4939_PCFG_ET1MODE	0x0000080000000000ULL
+#define TX4939_PCFG_ET0MODE	0x0000040000000000ULL
+#define TX4939_PCFG_ATA1MODE	0x0000020000000000ULL
+#define TX4939_PCFG_ATA0MODE	0x0000010000000000ULL
+#define TX4939_PCFG_BP_PLL	0x0000000100000000ULL
+
+#define TX4939_PCFG_SYSCLKEN	0x08000000
+#define TX4939_PCFG_PCICLKEN_ALL	0x000f0000
+#define TX4939_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
+#define TX4939_PCFG_SPEED1	0x00002000
+#define TX4939_PCFG_SPEED0	0x00001000
+#define TX4939_PCFG_ITMODE	0x00000300
+#define TX4939_PCFG_DMASEL_ALL	(0x00000007 | TX4939_PCFG_DMASEL3)
+#define TX4939_PCFG_DMASEL2	0x00000004
+#define TX4939_PCFG_DMASEL2_DRQ2	0x00000000
+#define TX4939_PCFG_DMASEL2_SIO0	0x00000004
+#define TX4939_PCFG_DMASEL1	0x00000002
+#define TX4939_PCFG_DMASEL1_DRQ1	0x00000000
+#define TX4939_PCFG_DMASEL0	0x00000001
+#define TX4939_PCFG_DMASEL0_DRQ0	0x00000000
+
+/* CLKCTR : Clock Control */
+#define TX4939_CLKCTR_IOSCKD	0x8000000000000000ULL
+#define TX4939_CLKCTR_SYSCKD	0x4000000000000000ULL
+#define TX4939_CLKCTR_TM5CKD	0x2000000000000000ULL
+#define TX4939_CLKCTR_TM4CKD	0x1000000000000000ULL
+#define TX4939_CLKCTR_TM3CKD	0x0800000000000000ULL
+#define TX4939_CLKCTR_CIRCKD	0x0400000000000000ULL
+#define TX4939_CLKCTR_SIO3CKD	0x0200000000000000ULL
+#define TX4939_CLKCTR_SIO2CKD	0x0100000000000000ULL
+#define TX4939_CLKCTR_SIO1CKD	0x0080000000000000ULL
+#define TX4939_CLKCTR_VPCCKD	0x0040000000000000ULL
+#define TX4939_CLKCTR_EPCICKD	0x0020000000000000ULL
+#define TX4939_CLKCTR_ETH1CKD	0x0008000000000000ULL
+#define TX4939_CLKCTR_ATA1CKD	0x0004000000000000ULL
+#define TX4939_CLKCTR_BROMCKD	0x0002000000000000ULL
+#define TX4939_CLKCTR_NDCCKD	0x0001000000000000ULL
+#define TX4939_CLKCTR_I2CCKD	0x0000800000000000ULL
+#define TX4939_CLKCTR_ETH0CKD	0x0000400000000000ULL
+#define TX4939_CLKCTR_SPICKD	0x0000200000000000ULL
+#define TX4939_CLKCTR_SRAMCKD	0x0000100000000000ULL
+#define TX4939_CLKCTR_PCI1CKD	0x0000080000000000ULL
+#define TX4939_CLKCTR_DMA1CKD	0x0000040000000000ULL
+#define TX4939_CLKCTR_ACLCKD	0x0000020000000000ULL
+#define TX4939_CLKCTR_ATA0CKD	0x0000010000000000ULL
+#define TX4939_CLKCTR_DMA0CKD	0x0000008000000000ULL
+#define TX4939_CLKCTR_PCICCKD	0x0000004000000000ULL
+#define TX4939_CLKCTR_I2SCKD	0x0000002000000000ULL
+#define TX4939_CLKCTR_TM0CKD	0x0000001000000000ULL
+#define TX4939_CLKCTR_TM1CKD	0x0000000800000000ULL
+#define TX4939_CLKCTR_TM2CKD	0x0000000400000000ULL
+#define TX4939_CLKCTR_SIO0CKD	0x0000000200000000ULL
+#define TX4939_CLKCTR_CYPCKD	0x0000000100000000ULL
+#define TX4939_CLKCTR_IOSRST	0x80000000
+#define TX4939_CLKCTR_SYSRST	0x40000000
+#define TX4939_CLKCTR_TM5RST	0x20000000
+#define TX4939_CLKCTR_TM4RST	0x10000000
+#define TX4939_CLKCTR_TM3RST	0x08000000
+#define TX4939_CLKCTR_CIRRST	0x04000000
+#define TX4939_CLKCTR_SIO3RST	0x02000000
+#define TX4939_CLKCTR_SIO2RST	0x01000000
+#define TX4939_CLKCTR_SIO1RST	0x00800000
+#define TX4939_CLKCTR_VPCRST	0x00400000
+#define TX4939_CLKCTR_EPCIRST	0x00200000
+#define TX4939_CLKCTR_ETH1RST	0x00080000
+#define TX4939_CLKCTR_ATA1RST	0x00040000
+#define TX4939_CLKCTR_BROMRST	0x00020000
+#define TX4939_CLKCTR_NDCRST	0x00010000
+#define TX4939_CLKCTR_I2CRST	0x00008000
+#define TX4939_CLKCTR_ETH0RST	0x00004000
+#define TX4939_CLKCTR_SPIRST	0x00002000
+#define TX4939_CLKCTR_SRAMRST	0x00001000
+#define TX4939_CLKCTR_PCI1RST	0x00000800
+#define TX4939_CLKCTR_DMA1RST	0x00000400
+#define TX4939_CLKCTR_ACLRST	0x00000200
+#define TX4939_CLKCTR_ATA0RST	0x00000100
+#define TX4939_CLKCTR_DMA0RST	0x00000080
+#define TX4939_CLKCTR_PCICRST	0x00000040
+#define TX4939_CLKCTR_I2SRST	0x00000020
+#define TX4939_CLKCTR_TM0RST	0x00000010
+#define TX4939_CLKCTR_TM1RST	0x00000008
+#define TX4939_CLKCTR_TM2RST	0x00000004
+#define TX4939_CLKCTR_SIO0RST	0x00000002
+#define TX4939_CLKCTR_CYPRST	0x00000001
+
+/*
+ * RTC
+ */
+#define TX4939_RTCCTL_ALME	0x00000080
+#define TX4939_RTCCTL_ALMD	0x00000040
+#define TX4939_RTCCTL_BUSY	0x00000020
+
+#define TX4939_RTCCTL_COMMAND	0x00000007
+#define TX4939_RTCCTL_COMMAND_NOP	0x00000000
+#define TX4939_RTCCTL_COMMAND_GETTIME	0x00000001
+#define TX4939_RTCCTL_COMMAND_SETTIME	0x00000002
+#define TX4939_RTCCTL_COMMAND_GETALARM	0x00000003
+#define TX4939_RTCCTL_COMMAND_SETALARM	0x00000004
+
+#define TX4939_RTCTBC_PM	0x00000080
+#define TX4939_RTCTBC_COMP	0x0000007f
+
+#define TX4939_RTC_REG_RAMSIZE	0x00000100
+#define TX4939_RTC_REG_RWBSIZE	0x00000006
+
+/*
+ * CRYPTO
+ */
+#define TX4939_CRYPTO_CSR_SAESO	0x08000000
+#define TX4939_CRYPTO_CSR_SAESI	0x04000000
+#define TX4939_CRYPTO_CSR_SDESO	0x02000000
+#define TX4939_CRYPTO_CSR_SDESI	0x01000000
+#define TX4939_CRYPTO_CSR_INDXBST_MASK	0x00700000
+#define TX4939_CRYPTO_CSR_INDXBST(n)	((n) << 20)
+#define TX4939_CRYPTO_CSR_TOINT	0x00080000
+#define TX4939_CRYPTO_CSR_DCINT	0x00040000
+#define TX4939_CRYPTO_CSR_GBINT	0x00010000
+#define TX4939_CRYPTO_CSR_INDXAST_MASK	0x0000e000
+#define TX4939_CRYPTO_CSR_INDXAST(n)	((n) << 13)
+#define TX4939_CRYPTO_CSR_CSWAP_MASK	0x00001800
+#define TX4939_CRYPTO_CSR_CSWAP_NONE	0x00000000
+#define TX4939_CRYPTO_CSR_CSWAP_IN	0x00000800
+#define TX4939_CRYPTO_CSR_CSWAP_OUT	0x00001000
+#define TX4939_CRYPTO_CSR_CSWAP_BOTH	0x00001800
+#define TX4939_CRYPTO_CSR_CDIV_MASK	0x00000600
+#define TX4939_CRYPTO_CSR_CDIV_DIV2	0x00000000
+#define TX4939_CRYPTO_CSR_CDIV_DIV1	0x00000200
+#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT	0x00000400
+#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT	0x00000600
+#define TX4939_CRYPTO_CSR_PDINT_MASK	0x000000c0
+#define TX4939_CRYPTO_CSR_PDINT_ALL	0x00000000
+#define TX4939_CRYPTO_CSR_PDINT_END	0x00000040
+#define TX4939_CRYPTO_CSR_PDINT_NEXT	0x00000080
+#define TX4939_CRYPTO_CSR_PDINT_NONE	0x000000c0
+#define TX4939_CRYPTO_CSR_GINTE	0x00000008
+#define TX4939_CRYPTO_CSR_RSTD	0x00000004
+#define TX4939_CRYPTO_CSR_RSTC	0x00000002
+#define TX4939_CRYPTO_CSR_ENCR	0x00000001
+
+/* bits for tx4939_crypto_reg.cdr.gen.ctrl */
+#define TX4939_CRYPTO_CTX_ENGINE_MASK	0x00000003
+#define TX4939_CRYPTO_CTX_ENGINE_DES	0x00000000
+#define TX4939_CRYPTO_CTX_ENGINE_AES	0x00000001
+#define TX4939_CRYPTO_CTX_ENGINE_MD5	0x00000002
+#define TX4939_CRYPTO_CTX_ENGINE_SHA1	0x00000003
+#define TX4939_CRYPTO_CTX_TDMS	0x00000010
+#define TX4939_CRYPTO_CTX_CMS	0x00000020
+#define TX4939_CRYPTO_CTX_DMS	0x00000040
+#define TX4939_CRYPTO_CTX_UPDATE	0x00000080
+
+/* bits for tx4939_crypto_desc.ctrl */
+#define TX4939_CRYPTO_DESC_OB_CNT_MASK	0xffe00000
+#define TX4939_CRYPTO_DESC_OB_CNT(cnt)	((cnt) << 21)
+#define TX4939_CRYPTO_DESC_IB_CNT_MASK	0x001ffc00
+#define TX4939_CRYPTO_DESC_IB_CNT(cnt)	((cnt) << 10)
+#define TX4939_CRYPTO_DESC_START	0x00000200
+#define TX4939_CRYPTO_DESC_END	0x00000100
+#define TX4939_CRYPTO_DESC_XOR	0x00000010
+#define TX4939_CRYPTO_DESC_LAST	0x00000008
+#define TX4939_CRYPTO_DESC_ERR_MASK	0x00000006
+#define TX4939_CRYPTO_DESC_ERR_NONE	0x00000000
+#define TX4939_CRYPTO_DESC_ERR_TOUT	0x00000002
+#define TX4939_CRYPTO_DESC_ERR_DIGEST	0x00000004
+#define TX4939_CRYPTO_DESC_OWN	0x00000001
+
+/* bits for tx4939_crypto_desc.index */
+#define TX4939_CRYPTO_DESC_HASH_IDX_MASK	0x00000070
+#define TX4939_CRYPTO_DESC_HASH_IDX(idx)	((idx) << 4)
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK	0x00000007
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx)	((idx) << 0)
+
+#define TX4939_CRYPTO_NR_SET	6
+
+#define TX4939_CRYPTO_RCSR_INTE	0x00000008
+#define TX4939_CRYPTO_RCSR_RST	0x00000004
+#define TX4939_CRYPTO_RCSR_FIN	0x00000002
+#define TX4939_CRYPTO_RCSR_ST	0x00000001
+
+/*
+ * VPC
+ */
+#define TX4939_VPC_CSR_GBINT	0x00010000
+#define TX4939_VPC_CSR_SWAPO	0x00000020
+#define TX4939_VPC_CSR_SWAPI	0x00000010
+#define TX4939_VPC_CSR_GINTE	0x00000008
+#define TX4939_VPC_CSR_RSTD	0x00000004
+#define TX4939_VPC_CSR_RSTVPC	0x00000002
+
+#define TX4939_VPC_CTRLA_VDPSN	0x00000200
+#define TX4939_VPC_CTRLA_PBUSY	0x00000100
+#define TX4939_VPC_CTRLA_DCINT	0x00000080
+#define TX4939_VPC_CTRLA_UOINT	0x00000040
+#define TX4939_VPC_CTRLA_PDINT_MASK	0x00000030
+#define TX4939_VPC_CTRLA_PDINT_ALL	0x00000000
+#define TX4939_VPC_CTRLA_PDINT_NEXT	0x00000010
+#define TX4939_VPC_CTRLA_PDINT_NONE	0x00000030
+#define TX4939_VPC_CTRLA_VDVLDP	0x00000008
+#define TX4939_VPC_CTRLA_VDMODE	0x00000004
+#define TX4939_VPC_CTRLA_VDFOR	0x00000002
+#define TX4939_VPC_CTRLA_ENVPC	0x00000001
+
+/* bits for tx4939_vpc_desc.ctrl1 */
+#define TX4939_VPC_DESC_CTRL1_ERR_MASK	0x00000006
+#define TX4939_VPC_DESC_CTRL1_OWN	0x00000001
+
+#define tx4939_ddrcptr	((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG)
+#define tx4939_ebuscptr		tx4938_ebuscptr
+#define tx4939_ircptr \
+		((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG)
+#define tx4939_pcicptr		tx4938_pcicptr
+#define tx4939_pcic1ptr		tx4938_pcic1ptr
+#define tx4939_ccfgptr \
+		((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG)
+#define tx4939_sramcptr		tx4938_sramcptr
+#define tx4939_rtcptr \
+		((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG)
+#define tx4939_cryptoptr \
+		((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG)
+#define tx4939_vpcptr	((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG)
+
+#define TX4939_REV_MAJ_MIN()	\
+	((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff)
+#define TX4939_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16)
+#define TX4939_CCFG_BCFG()	\
+	((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \
+		 >> 32))
+
+#define tx4939_ccfg_clear(bits)	tx4938_ccfg_clear(bits)
+#define tx4939_ccfg_set(bits)	tx4938_ccfg_set(bits)
+#define tx4939_ccfg_change(change, new)	tx4938_ccfg_change(change, new)
+
+#define TX4939_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
+#define TX4939_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
+#define TX4939_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
+#define TX4939_EBUSC_WIDTH(ch)	\
+	(16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1))
+
+/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2  (14.745MHz for MST 20MHz) */
+#define TX4939_SCLK0(mst)	\
+	((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2)
+
+void tx4939_wdt_init(void);
+void tx4939_add_memory_regions(void);
+void tx4939_setup(void);
+void tx4939_time_init(unsigned int tmrnr);
+void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4939_spi_init(int busid);
+void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4939_report_pciclk(void);
+void tx4939_report_pci1clk(void);
+struct pci_dev;
+int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+void tx4939_setup_pcierr_irq(void);
+void tx4939_irq_init(void);
+int tx4939_irq(void);
+void tx4939_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX4939_H */
diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h
new file mode 100644
index 0000000..5620879
--- /dev/null
+++ b/arch/mips/include/asm/txx9irq.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-mips/txx9irq.h
+ * TX39/TX49 interrupt controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9IRQ_H
+#define __ASM_TXX9IRQ_H
+
+#include <irq.h>
+
+#ifdef CONFIG_IRQ_CPU
+#define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
+#define TXX9_IRQ_BASE	0
+#endif
+#endif
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXx9_MAX_IR 16
+#else
+#define TXx9_MAX_IR 32
+#endif
+
+void txx9_irq_init(unsigned long baseaddr);
+int txx9_irq(void);
+int txx9_irq_set_pri(int irc_irq, int new_pri);
+
+#endif /* __ASM_TXX9IRQ_H */
diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h
new file mode 100644
index 0000000..3d6fa9f
--- /dev/null
+++ b/arch/mips/include/asm/txx9pio.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-mips/txx9pio.h
+ * TX39/TX49 PIO controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9PIO_H
+#define __ASM_TXX9PIO_H
+
+#include <linux/types.h>
+
+struct txx9_pio_reg {
+	__u32 dout;
+	__u32 din;
+	__u32 dir;
+	__u32 od;
+	__u32 flag[2];
+	__u32 pol;
+	__u32 intc;
+	__u32 maskcpu;
+	__u32 maskext;
+};
+
+int txx9_gpio_init(unsigned long baseaddr,
+		   unsigned int base, unsigned int num);
+
+#endif /* __ASM_TXX9PIO_H */
diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h
new file mode 100644
index 0000000..67f70a8
--- /dev/null
+++ b/arch/mips/include/asm/txx9tmr.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-mips/txx9tmr.h
+ * TX39/TX49 timer controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9TMR_H
+#define __ASM_TXX9TMR_H
+
+#include <linux/types.h>
+
+struct txx9_tmr_reg {
+	u32 tcr;
+	u32 tisr;
+	u32 cpra;
+	u32 cprb;
+	u32 itmr;
+	u32 unused0[3];
+	u32 ccdr;
+	u32 unused1[3];
+	u32 pgmr;
+	u32 unused2[3];
+	u32 wtmr;
+	u32 unused3[43];
+	u32 trr;
+};
+
+/* TMTCR : Timer Control */
+#define TXx9_TMTCR_TCE		0x00000080
+#define TXx9_TMTCR_CCDE		0x00000040
+#define TXx9_TMTCR_CRE		0x00000020
+#define TXx9_TMTCR_ECES		0x00000008
+#define TXx9_TMTCR_CCS		0x00000004
+#define TXx9_TMTCR_TMODE_MASK	0x00000003
+#define TXx9_TMTCR_TMODE_ITVL	0x00000000
+#define TXx9_TMTCR_TMODE_PGEN	0x00000001
+#define TXx9_TMTCR_TMODE_WDOG	0x00000002
+
+/* TMTISR : Timer Int. Status */
+#define TXx9_TMTISR_TPIBS	0x00000004
+#define TXx9_TMTISR_TPIAS	0x00000002
+#define TXx9_TMTISR_TIIS	0x00000001
+
+/* TMITMR : Interval Timer Mode */
+#define TXx9_TMITMR_TIIE	0x00008000
+#define TXx9_TMITMR_TZCE	0x00000001
+
+/* TMWTMR : Watchdog Timer Mode */
+#define TXx9_TMWTMR_TWIE	0x00008000
+#define TXx9_TMWTMR_WDIS	0x00000080
+#define TXx9_TMWTMR_TWC		0x00000001
+
+void txx9_clocksource_init(unsigned long baseaddr,
+			   unsigned int imbusclk);
+void txx9_clockevent_init(unsigned long baseaddr, int irq,
+			  unsigned int imbusclk);
+void txx9_tmr_init(unsigned long baseaddr);
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXX9_TIMER_BITS	24
+#else
+#define TXX9_TIMER_BITS	32
+#endif
+
+#endif /* __ASM_TXX9TMR_H */
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
new file mode 100644
index 0000000..bcbb8d6
--- /dev/null
+++ b/arch/mips/include/asm/types.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#if _MIPS_SZLONG == 64
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG _MIPS_SZLONG
+
+#ifndef __ASSEMBLY__
+
+#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
+    || defined(CONFIG_64BIT)
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+/*
+ * Don't use phys_t.  You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
new file mode 100644
index 0000000..b895144
--- /dev/null
+++ b/arch/mips/include/asm/uaccess.h
@@ -0,0 +1,852 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <asm-generic/uaccess.h>
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#ifdef CONFIG_32BIT
+
+#define __UA_LIMIT	0x80000000UL
+
+#define __UA_ADDR	".word"
+#define __UA_LA		"la"
+#define __UA_ADDU	"addu"
+#define __UA_t0		"$8"
+#define __UA_t1		"$9"
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define __UA_LIMIT	(- TASK_SIZE)
+
+#define __UA_ADDR	".dword"
+#define __UA_LA		"dla"
+#define __UA_ADDU	"daddu"
+#define __UA_t0		"$12"
+#define __UA_t1		"$13"
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * USER_DS is a bitmask that has the bits set that may not be set in a valid
+ * userspace address.  Note that we limit 32-bit userspace to 0x7fff8000 but
+ * the arithmetic we're doing only works if the limit is a power of two, so
+ * we use 0x80000000 here on 32-bit kernels.  If a process passes an invalid
+ * address in this range it's the process's problem, not ours :-)
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0UL })
+#define USER_DS		((mm_segment_t) { __UA_LIMIT })
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+
+/*
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
+ */
+#define __ua_size(size)							\
+	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_mask get_fs().seg
+
+#define __access_ok(addr, size, mask)					\
+	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size)					\
+	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)	\
+	__put_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr)
+#endif
+
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr)				\
+do {									\
+	switch (size) {							\
+	case 1: __get_user_asm(val, "lb", ptr); break;			\
+	case 2: __get_user_asm(val, "lh", ptr); break;			\
+	case 4: __get_user_asm(val, "lw", ptr); break;			\
+	case 8: __GET_USER_DW(val, ptr); break;				\
+	default: __get_user_unknown(); break;				\
+	}								\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	int __gu_err;							\
+									\
+	__get_user_common((x), size, ptr);				\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	int __gu_err = -EFAULT;						\
+	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
+									\
+	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
+		__get_user_common((x), size, __gu_ptr);			\
+									\
+	__gu_err;							\
+})
+
+#define __get_user_asm(val, insn, addr)					\
+{									\
+	long __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%1, %3				\n"	\
+	"2:							\n"	\
+	"	.section .fixup,\"ax\"				\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section __ex_table,\"a\"			\n"	\
+	"	"__UA_ADDR "\t1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=r" (__gu_tmp)				\
+	: "0" (0), "o" (__m(addr)), "i" (-EFAULT));			\
+									\
+	(val) = (__typeof__(*(addr))) __gu_tmp;				\
+}
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_asm_ll32(val, addr)					\
+{									\
+	union {								\
+		unsigned long long	l;				\
+		__typeof__(*(addr))	t;				\
+	} __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+	"1:	lw	%1, (%3)				\n"	\
+	"2:	lw	%D1, 4(%3)				\n"	\
+	"3:	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	move	%1, $0					\n"	\
+	"	move	%D1, $0					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__gu_err), "=&r" (__gu_tmp.l)				\
+	: "0" (0), "r" (addr), "i" (-EFAULT));				\
+									\
+	(val) = __gu_tmp.t;						\
+}
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
+#endif
+
+#define __put_user_nocheck(x, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	switch (size) {							\
+	case 1: __put_user_asm("sb", ptr); break;			\
+	case 2: __put_user_asm("sh", ptr); break;			\
+	case 4: __put_user_asm("sw", ptr); break;			\
+	case 8: __PUT_USER_DW(ptr); break;				\
+	default: __put_user_unknown(); break;				\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	int __pu_err = -EFAULT;						\
+									\
+	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
+		switch (size) {						\
+		case 1: __put_user_asm("sb", __pu_addr); break;		\
+		case 2: __put_user_asm("sh", __pu_addr); break;		\
+		case 4: __put_user_asm("sw", __pu_addr); break;		\
+		case 8: __PUT_USER_DW(__pu_addr); break;		\
+		default: __put_user_unknown(); break;			\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(insn, ptr)					\
+{									\
+	__asm__ __volatile__(						\
+	"1:	" insn "	%z2, %3		# __put_user_asm\n"	\
+	"2:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"3:	li	%0, %4					\n"	\
+	"	j	2b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 3b				\n"	\
+	"	.previous					\n"	\
+	: "=r" (__pu_err)						\
+	: "0" (0), "Jr" (__pu_val), "o" (__m(ptr)),			\
+	  "i" (-EFAULT));						\
+}
+
+#define __put_user_asm_ll32(ptr)					\
+{									\
+	__asm__ __volatile__(						\
+	"1:	sw	%2, (%3)	# __put_user_asm_ll32	\n"	\
+	"2:	sw	%D2, 4(%3)				\n"	\
+	"3:							\n"	\
+	"	.section	.fixup,\"ax\"			\n"	\
+	"4:	li	%0, %4					\n"	\
+	"	j	3b					\n"	\
+	"	.previous					\n"	\
+	"	.section	__ex_table,\"a\"		\n"	\
+	"	" __UA_ADDR "	1b, 4b				\n"	\
+	"	" __UA_ADDR "	2b, 4b				\n"	\
+	"	.previous"						\
+	: "=r" (__pu_err)						\
+	: "0" (0), "r" (__pu_val), "r" (ptr),				\
+	  "i" (-EFAULT));						\
+}
+
+extern void __put_user_unknown(void);
+
+/*
+ * We're generating jump to subroutines which will be outside the range of
+ * jump instructions
+ */
+#ifdef MODULE
+#define __MODULE_JAL(destination)					\
+	".set\tnoat\n\t"						\
+	__UA_LA "\t$1, " #destination "\n\t" 				\
+	"jalr\t$1\n\t"							\
+	".set\tat\n\t"
+#else
+#define __MODULE_JAL(destination)					\
+	"jal\t" #destination "\n\t"
+#endif
+
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_SCRATCH "$0"
+#else
+#define DADDI_SCRATCH "$3"
+#endif
+
+extern size_t __copy_user(void *__to, const void *__from, size_t __n);
+
+#define __invoke_copy_to_user(to, from, n)				\
+({									\
+	register void __user *__cu_to_r __asm__("$4");			\
+	register const void *__cu_from_r __asm__("$5");			\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	__MODULE_JAL(__copy_user)					\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len;							\
+})
+
+extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
+
+#define __copy_to_user_inatomic(to, from, n)				\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len;							\
+})
+
+#define __copy_from_user_inatomic(to, from, n)				\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from,	\
+	                                            __cu_len);		\
+	__cu_len;							\
+})
+
+/*
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void *__cu_from;						\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
+		                                 __cu_len);		\
+	__cu_len;							\
+})
+
+#define __invoke_copy_from_user(to, from, n)				\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(__copy_user)					\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+#define __invoke_copy_from_user_inatomic(to, from, n)			\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(__copy_user_inatomic)				\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31",		\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+/*
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to, from, n)					\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
+
+/*
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to, from, n)					\
+({									\
+	void *__cu_to;							\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+
+#define copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+		                                   __cu_len);		\
+	__cu_len;							\
+})
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+static inline __kernel_size_t
+__clear_user(void __user *addr, __kernel_size_t size)
+{
+	__kernel_size_t res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, $0\n\t"
+		"move\t$6, %2\n\t"
+		__MODULE_JAL(__bzero)
+		"move\t%0, $6"
+		: "=r" (res)
+		: "r" (addr), "r" (size)
+		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+
+	return res;
+}
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+	__cl_size;							\
+})
+
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+__strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		"move\t$6, %3\n\t"
+		__MODULE_JAL(__strncpy_from_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (__to), "r" (__from), "r" (__len)
+		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strlen_user(const char __user *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strlen_user(const char __user *s)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		__MODULE_JAL(__strlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s)
+		: "$2", "$4", __UA_t0, "$31");
+
+	return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strnlen_user(const char __user *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_nocheck_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+	long res;
+
+	might_sleep();
+	__asm__ __volatile__(
+		"move\t$4, %1\n\t"
+		"move\t$5, %2\n\t"
+		__MODULE_JAL(__strnlen_user_asm)
+		"move\t%0, $2"
+		: "=r" (res)
+		: "r" (s), "r" (n)
+		: "$2", "$4", "$5", __UA_t0, "$31");
+
+	return res;
+}
+
+struct exception_table_entry
+{
+	unsigned long insn;
+	unsigned long nextinsn;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h
new file mode 100644
index 0000000..8a4b20e
--- /dev/null
+++ b/arch/mips/include/asm/ucontext.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Low level exception handling
+ *
+ * Copyright (C) 1998, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
new file mode 100644
index 0000000..7924049
--- /dev/null
+++ b/arch/mips/include/asm/unaligned.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_MIPS_UNALIGNED_H
+#define _ASM_MIPS_UNALIGNED_H
+
+#include <linux/compiler.h>
+#if defined(__MIPSEB__)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#elif defined(__MIPSEL__)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#else
+#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
new file mode 100644
index 0000000..a73e153
--- /dev/null
+++ b/arch/mips/include/asm/unistd.h
@@ -0,0 +1,1037 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto
+ * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Linux o32 style syscalls are in the range from 4000 to 4999.
+ */
+#define __NR_Linux			4000
+#define __NR_syscall			(__NR_Linux +   0)
+#define __NR_exit			(__NR_Linux +   1)
+#define __NR_fork			(__NR_Linux +   2)
+#define __NR_read			(__NR_Linux +   3)
+#define __NR_write			(__NR_Linux +   4)
+#define __NR_open			(__NR_Linux +   5)
+#define __NR_close			(__NR_Linux +   6)
+#define __NR_waitpid			(__NR_Linux +   7)
+#define __NR_creat			(__NR_Linux +   8)
+#define __NR_link			(__NR_Linux +   9)
+#define __NR_unlink			(__NR_Linux +  10)
+#define __NR_execve			(__NR_Linux +  11)
+#define __NR_chdir			(__NR_Linux +  12)
+#define __NR_time			(__NR_Linux +  13)
+#define __NR_mknod			(__NR_Linux +  14)
+#define __NR_chmod			(__NR_Linux +  15)
+#define __NR_lchown			(__NR_Linux +  16)
+#define __NR_break			(__NR_Linux +  17)
+#define __NR_unused18			(__NR_Linux +  18)
+#define __NR_lseek			(__NR_Linux +  19)
+#define __NR_getpid			(__NR_Linux +  20)
+#define __NR_mount			(__NR_Linux +  21)
+#define __NR_umount			(__NR_Linux +  22)
+#define __NR_setuid			(__NR_Linux +  23)
+#define __NR_getuid			(__NR_Linux +  24)
+#define __NR_stime			(__NR_Linux +  25)
+#define __NR_ptrace			(__NR_Linux +  26)
+#define __NR_alarm			(__NR_Linux +  27)
+#define __NR_unused28			(__NR_Linux +  28)
+#define __NR_pause			(__NR_Linux +  29)
+#define __NR_utime			(__NR_Linux +  30)
+#define __NR_stty			(__NR_Linux +  31)
+#define __NR_gtty			(__NR_Linux +  32)
+#define __NR_access			(__NR_Linux +  33)
+#define __NR_nice			(__NR_Linux +  34)
+#define __NR_ftime			(__NR_Linux +  35)
+#define __NR_sync			(__NR_Linux +  36)
+#define __NR_kill			(__NR_Linux +  37)
+#define __NR_rename			(__NR_Linux +  38)
+#define __NR_mkdir			(__NR_Linux +  39)
+#define __NR_rmdir			(__NR_Linux +  40)
+#define __NR_dup			(__NR_Linux +  41)
+#define __NR_pipe			(__NR_Linux +  42)
+#define __NR_times			(__NR_Linux +  43)
+#define __NR_prof			(__NR_Linux +  44)
+#define __NR_brk			(__NR_Linux +  45)
+#define __NR_setgid			(__NR_Linux +  46)
+#define __NR_getgid			(__NR_Linux +  47)
+#define __NR_signal			(__NR_Linux +  48)
+#define __NR_geteuid			(__NR_Linux +  49)
+#define __NR_getegid			(__NR_Linux +  50)
+#define __NR_acct			(__NR_Linux +  51)
+#define __NR_umount2			(__NR_Linux +  52)
+#define __NR_lock			(__NR_Linux +  53)
+#define __NR_ioctl			(__NR_Linux +  54)
+#define __NR_fcntl			(__NR_Linux +  55)
+#define __NR_mpx			(__NR_Linux +  56)
+#define __NR_setpgid			(__NR_Linux +  57)
+#define __NR_ulimit			(__NR_Linux +  58)
+#define __NR_unused59			(__NR_Linux +  59)
+#define __NR_umask			(__NR_Linux +  60)
+#define __NR_chroot			(__NR_Linux +  61)
+#define __NR_ustat			(__NR_Linux +  62)
+#define __NR_dup2			(__NR_Linux +  63)
+#define __NR_getppid			(__NR_Linux +  64)
+#define __NR_getpgrp			(__NR_Linux +  65)
+#define __NR_setsid			(__NR_Linux +  66)
+#define __NR_sigaction			(__NR_Linux +  67)
+#define __NR_sgetmask			(__NR_Linux +  68)
+#define __NR_ssetmask			(__NR_Linux +  69)
+#define __NR_setreuid			(__NR_Linux +  70)
+#define __NR_setregid			(__NR_Linux +  71)
+#define __NR_sigsuspend			(__NR_Linux +  72)
+#define __NR_sigpending			(__NR_Linux +  73)
+#define __NR_sethostname		(__NR_Linux +  74)
+#define __NR_setrlimit			(__NR_Linux +  75)
+#define __NR_getrlimit			(__NR_Linux +  76)
+#define __NR_getrusage			(__NR_Linux +  77)
+#define __NR_gettimeofday		(__NR_Linux +  78)
+#define __NR_settimeofday		(__NR_Linux +  79)
+#define __NR_getgroups			(__NR_Linux +  80)
+#define __NR_setgroups			(__NR_Linux +  81)
+#define __NR_reserved82			(__NR_Linux +  82)
+#define __NR_symlink			(__NR_Linux +  83)
+#define __NR_unused84			(__NR_Linux +  84)
+#define __NR_readlink			(__NR_Linux +  85)
+#define __NR_uselib			(__NR_Linux +  86)
+#define __NR_swapon			(__NR_Linux +  87)
+#define __NR_reboot			(__NR_Linux +  88)
+#define __NR_readdir			(__NR_Linux +  89)
+#define __NR_mmap			(__NR_Linux +  90)
+#define __NR_munmap			(__NR_Linux +  91)
+#define __NR_truncate			(__NR_Linux +  92)
+#define __NR_ftruncate			(__NR_Linux +  93)
+#define __NR_fchmod			(__NR_Linux +  94)
+#define __NR_fchown			(__NR_Linux +  95)
+#define __NR_getpriority		(__NR_Linux +  96)
+#define __NR_setpriority		(__NR_Linux +  97)
+#define __NR_profil			(__NR_Linux +  98)
+#define __NR_statfs			(__NR_Linux +  99)
+#define __NR_fstatfs			(__NR_Linux + 100)
+#define __NR_ioperm			(__NR_Linux + 101)
+#define __NR_socketcall			(__NR_Linux + 102)
+#define __NR_syslog			(__NR_Linux + 103)
+#define __NR_setitimer			(__NR_Linux + 104)
+#define __NR_getitimer			(__NR_Linux + 105)
+#define __NR_stat			(__NR_Linux + 106)
+#define __NR_lstat			(__NR_Linux + 107)
+#define __NR_fstat			(__NR_Linux + 108)
+#define __NR_unused109			(__NR_Linux + 109)
+#define __NR_iopl			(__NR_Linux + 110)
+#define __NR_vhangup			(__NR_Linux + 111)
+#define __NR_idle			(__NR_Linux + 112)
+#define __NR_vm86			(__NR_Linux + 113)
+#define __NR_wait4			(__NR_Linux + 114)
+#define __NR_swapoff			(__NR_Linux + 115)
+#define __NR_sysinfo			(__NR_Linux + 116)
+#define __NR_ipc			(__NR_Linux + 117)
+#define __NR_fsync			(__NR_Linux + 118)
+#define __NR_sigreturn			(__NR_Linux + 119)
+#define __NR_clone			(__NR_Linux + 120)
+#define __NR_setdomainname		(__NR_Linux + 121)
+#define __NR_uname			(__NR_Linux + 122)
+#define __NR_modify_ldt			(__NR_Linux + 123)
+#define __NR_adjtimex			(__NR_Linux + 124)
+#define __NR_mprotect			(__NR_Linux + 125)
+#define __NR_sigprocmask		(__NR_Linux + 126)
+#define __NR_create_module		(__NR_Linux + 127)
+#define __NR_init_module		(__NR_Linux + 128)
+#define __NR_delete_module		(__NR_Linux + 129)
+#define __NR_get_kernel_syms		(__NR_Linux + 130)
+#define __NR_quotactl			(__NR_Linux + 131)
+#define __NR_getpgid			(__NR_Linux + 132)
+#define __NR_fchdir			(__NR_Linux + 133)
+#define __NR_bdflush			(__NR_Linux + 134)
+#define __NR_sysfs			(__NR_Linux + 135)
+#define __NR_personality		(__NR_Linux + 136)
+#define __NR_afs_syscall		(__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid			(__NR_Linux + 138)
+#define __NR_setfsgid			(__NR_Linux + 139)
+#define __NR__llseek			(__NR_Linux + 140)
+#define __NR_getdents			(__NR_Linux + 141)
+#define __NR__newselect			(__NR_Linux + 142)
+#define __NR_flock			(__NR_Linux + 143)
+#define __NR_msync			(__NR_Linux + 144)
+#define __NR_readv			(__NR_Linux + 145)
+#define __NR_writev			(__NR_Linux + 146)
+#define __NR_cacheflush			(__NR_Linux + 147)
+#define __NR_cachectl			(__NR_Linux + 148)
+#define __NR_sysmips			(__NR_Linux + 149)
+#define __NR_unused150			(__NR_Linux + 150)
+#define __NR_getsid			(__NR_Linux + 151)
+#define __NR_fdatasync			(__NR_Linux + 152)
+#define __NR__sysctl			(__NR_Linux + 153)
+#define __NR_mlock			(__NR_Linux + 154)
+#define __NR_munlock			(__NR_Linux + 155)
+#define __NR_mlockall			(__NR_Linux + 156)
+#define __NR_munlockall			(__NR_Linux + 157)
+#define __NR_sched_setparam		(__NR_Linux + 158)
+#define __NR_sched_getparam		(__NR_Linux + 159)
+#define __NR_sched_setscheduler		(__NR_Linux + 160)
+#define __NR_sched_getscheduler		(__NR_Linux + 161)
+#define __NR_sched_yield		(__NR_Linux + 162)
+#define __NR_sched_get_priority_max	(__NR_Linux + 163)
+#define __NR_sched_get_priority_min	(__NR_Linux + 164)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 165)
+#define __NR_nanosleep			(__NR_Linux + 166)
+#define __NR_mremap			(__NR_Linux + 167)
+#define __NR_accept			(__NR_Linux + 168)
+#define __NR_bind			(__NR_Linux + 169)
+#define __NR_connect			(__NR_Linux + 170)
+#define __NR_getpeername		(__NR_Linux + 171)
+#define __NR_getsockname		(__NR_Linux + 172)
+#define __NR_getsockopt			(__NR_Linux + 173)
+#define __NR_listen			(__NR_Linux + 174)
+#define __NR_recv			(__NR_Linux + 175)
+#define __NR_recvfrom			(__NR_Linux + 176)
+#define __NR_recvmsg			(__NR_Linux + 177)
+#define __NR_send			(__NR_Linux + 178)
+#define __NR_sendmsg			(__NR_Linux + 179)
+#define __NR_sendto			(__NR_Linux + 180)
+#define __NR_setsockopt			(__NR_Linux + 181)
+#define __NR_shutdown			(__NR_Linux + 182)
+#define __NR_socket			(__NR_Linux + 183)
+#define __NR_socketpair			(__NR_Linux + 184)
+#define __NR_setresuid			(__NR_Linux + 185)
+#define __NR_getresuid			(__NR_Linux + 186)
+#define __NR_query_module		(__NR_Linux + 187)
+#define __NR_poll			(__NR_Linux + 188)
+#define __NR_nfsservctl			(__NR_Linux + 189)
+#define __NR_setresgid			(__NR_Linux + 190)
+#define __NR_getresgid			(__NR_Linux + 191)
+#define __NR_prctl			(__NR_Linux + 192)
+#define __NR_rt_sigreturn		(__NR_Linux + 193)
+#define __NR_rt_sigaction		(__NR_Linux + 194)
+#define __NR_rt_sigprocmask		(__NR_Linux + 195)
+#define __NR_rt_sigpending		(__NR_Linux + 196)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 197)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 198)
+#define __NR_rt_sigsuspend		(__NR_Linux + 199)
+#define __NR_pread64			(__NR_Linux + 200)
+#define __NR_pwrite64			(__NR_Linux + 201)
+#define __NR_chown			(__NR_Linux + 202)
+#define __NR_getcwd			(__NR_Linux + 203)
+#define __NR_capget			(__NR_Linux + 204)
+#define __NR_capset			(__NR_Linux + 205)
+#define __NR_sigaltstack		(__NR_Linux + 206)
+#define __NR_sendfile			(__NR_Linux + 207)
+#define __NR_getpmsg			(__NR_Linux + 208)
+#define __NR_putpmsg			(__NR_Linux + 209)
+#define __NR_mmap2			(__NR_Linux + 210)
+#define __NR_truncate64			(__NR_Linux + 211)
+#define __NR_ftruncate64		(__NR_Linux + 212)
+#define __NR_stat64			(__NR_Linux + 213)
+#define __NR_lstat64			(__NR_Linux + 214)
+#define __NR_fstat64			(__NR_Linux + 215)
+#define __NR_pivot_root			(__NR_Linux + 216)
+#define __NR_mincore			(__NR_Linux + 217)
+#define __NR_madvise			(__NR_Linux + 218)
+#define __NR_getdents64			(__NR_Linux + 219)
+#define __NR_fcntl64			(__NR_Linux + 220)
+#define __NR_reserved221		(__NR_Linux + 221)
+#define __NR_gettid			(__NR_Linux + 222)
+#define __NR_readahead			(__NR_Linux + 223)
+#define __NR_setxattr			(__NR_Linux + 224)
+#define __NR_lsetxattr			(__NR_Linux + 225)
+#define __NR_fsetxattr			(__NR_Linux + 226)
+#define __NR_getxattr			(__NR_Linux + 227)
+#define __NR_lgetxattr			(__NR_Linux + 228)
+#define __NR_fgetxattr			(__NR_Linux + 229)
+#define __NR_listxattr			(__NR_Linux + 230)
+#define __NR_llistxattr			(__NR_Linux + 231)
+#define __NR_flistxattr			(__NR_Linux + 232)
+#define __NR_removexattr		(__NR_Linux + 233)
+#define __NR_lremovexattr		(__NR_Linux + 234)
+#define __NR_fremovexattr		(__NR_Linux + 235)
+#define __NR_tkill			(__NR_Linux + 236)
+#define __NR_sendfile64			(__NR_Linux + 237)
+#define __NR_futex			(__NR_Linux + 238)
+#define __NR_sched_setaffinity		(__NR_Linux + 239)
+#define __NR_sched_getaffinity		(__NR_Linux + 240)
+#define __NR_io_setup			(__NR_Linux + 241)
+#define __NR_io_destroy			(__NR_Linux + 242)
+#define __NR_io_getevents		(__NR_Linux + 243)
+#define __NR_io_submit			(__NR_Linux + 244)
+#define __NR_io_cancel			(__NR_Linux + 245)
+#define __NR_exit_group			(__NR_Linux + 246)
+#define __NR_lookup_dcookie		(__NR_Linux + 247)
+#define __NR_epoll_create		(__NR_Linux + 248)
+#define __NR_epoll_ctl			(__NR_Linux + 249)
+#define __NR_epoll_wait			(__NR_Linux + 250)
+#define __NR_remap_file_pages		(__NR_Linux + 251)
+#define __NR_set_tid_address		(__NR_Linux + 252)
+#define __NR_restart_syscall		(__NR_Linux + 253)
+#define __NR_fadvise64			(__NR_Linux + 254)
+#define __NR_statfs64			(__NR_Linux + 255)
+#define __NR_fstatfs64			(__NR_Linux + 256)
+#define __NR_timer_create		(__NR_Linux + 257)
+#define __NR_timer_settime		(__NR_Linux + 258)
+#define __NR_timer_gettime		(__NR_Linux + 259)
+#define __NR_timer_getoverrun		(__NR_Linux + 260)
+#define __NR_timer_delete		(__NR_Linux + 261)
+#define __NR_clock_settime		(__NR_Linux + 262)
+#define __NR_clock_gettime		(__NR_Linux + 263)
+#define __NR_clock_getres		(__NR_Linux + 264)
+#define __NR_clock_nanosleep		(__NR_Linux + 265)
+#define __NR_tgkill			(__NR_Linux + 266)
+#define __NR_utimes			(__NR_Linux + 267)
+#define __NR_mbind			(__NR_Linux + 268)
+#define __NR_get_mempolicy		(__NR_Linux + 269)
+#define __NR_set_mempolicy		(__NR_Linux + 270)
+#define __NR_mq_open			(__NR_Linux + 271)
+#define __NR_mq_unlink			(__NR_Linux + 272)
+#define __NR_mq_timedsend		(__NR_Linux + 273)
+#define __NR_mq_timedreceive		(__NR_Linux + 274)
+#define __NR_mq_notify			(__NR_Linux + 275)
+#define __NR_mq_getsetattr		(__NR_Linux + 276)
+#define __NR_vserver			(__NR_Linux + 277)
+#define __NR_waitid			(__NR_Linux + 278)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 279) */
+#define __NR_add_key			(__NR_Linux + 280)
+#define __NR_request_key		(__NR_Linux + 281)
+#define __NR_keyctl			(__NR_Linux + 282)
+#define __NR_set_thread_area		(__NR_Linux + 283)
+#define __NR_inotify_init		(__NR_Linux + 284)
+#define __NR_inotify_add_watch		(__NR_Linux + 285)
+#define __NR_inotify_rm_watch		(__NR_Linux + 286)
+#define __NR_migrate_pages		(__NR_Linux + 287)
+#define __NR_openat			(__NR_Linux + 288)
+#define __NR_mkdirat			(__NR_Linux + 289)
+#define __NR_mknodat			(__NR_Linux + 290)
+#define __NR_fchownat			(__NR_Linux + 291)
+#define __NR_futimesat			(__NR_Linux + 292)
+#define __NR_fstatat64			(__NR_Linux + 293)
+#define __NR_unlinkat			(__NR_Linux + 294)
+#define __NR_renameat			(__NR_Linux + 295)
+#define __NR_linkat			(__NR_Linux + 296)
+#define __NR_symlinkat			(__NR_Linux + 297)
+#define __NR_readlinkat			(__NR_Linux + 298)
+#define __NR_fchmodat			(__NR_Linux + 299)
+#define __NR_faccessat			(__NR_Linux + 300)
+#define __NR_pselect6			(__NR_Linux + 301)
+#define __NR_ppoll			(__NR_Linux + 302)
+#define __NR_unshare			(__NR_Linux + 303)
+#define __NR_splice			(__NR_Linux + 304)
+#define __NR_sync_file_range		(__NR_Linux + 305)
+#define __NR_tee			(__NR_Linux + 306)
+#define __NR_vmsplice			(__NR_Linux + 307)
+#define __NR_move_pages			(__NR_Linux + 308)
+#define __NR_set_robust_list		(__NR_Linux + 309)
+#define __NR_get_robust_list		(__NR_Linux + 310)
+#define __NR_kexec_load			(__NR_Linux + 311)
+#define __NR_getcpu			(__NR_Linux + 312)
+#define __NR_epoll_pwait		(__NR_Linux + 313)
+#define __NR_ioprio_set			(__NR_Linux + 314)
+#define __NR_ioprio_get			(__NR_Linux + 315)
+#define __NR_utimensat			(__NR_Linux + 316)
+#define __NR_signalfd			(__NR_Linux + 317)
+#define __NR_timerfd			(__NR_Linux + 318)
+#define __NR_eventfd			(__NR_Linux + 319)
+#define __NR_fallocate			(__NR_Linux + 320)
+#define __NR_timerfd_create		(__NR_Linux + 321)
+#define __NR_timerfd_gettime		(__NR_Linux + 322)
+#define __NR_timerfd_settime		(__NR_Linux + 323)
+#define __NR_signalfd4			(__NR_Linux + 324)
+#define __NR_eventfd2			(__NR_Linux + 325)
+#define __NR_epoll_create1		(__NR_Linux + 326)
+#define __NR_dup3			(__NR_Linux + 327)
+#define __NR_pipe2			(__NR_Linux + 328)
+#define __NR_inotify_init1		(__NR_Linux + 329)
+
+/*
+ * Offset of the last Linux o32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		329
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#define __NR_O32_Linux			4000
+#define __NR_O32_Linux_syscalls		329
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/*
+ * Linux 64-bit syscalls are in the range from 5000 to 5999.
+ */
+#define __NR_Linux			5000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_set_tid_address		(__NR_Linux + 212)
+#define __NR_restart_syscall		(__NR_Linux + 213)
+#define __NR_semtimedop			(__NR_Linux + 214)
+#define __NR_fadvise64			(__NR_Linux + 215)
+#define __NR_timer_create		(__NR_Linux + 216)
+#define __NR_timer_settime		(__NR_Linux + 217)
+#define __NR_timer_gettime		(__NR_Linux + 218)
+#define __NR_timer_getoverrun		(__NR_Linux + 219)
+#define __NR_timer_delete		(__NR_Linux + 220)
+#define __NR_clock_settime		(__NR_Linux + 221)
+#define __NR_clock_gettime		(__NR_Linux + 222)
+#define __NR_clock_getres		(__NR_Linux + 223)
+#define __NR_clock_nanosleep		(__NR_Linux + 224)
+#define __NR_tgkill			(__NR_Linux + 225)
+#define __NR_utimes			(__NR_Linux + 226)
+#define __NR_mbind			(__NR_Linux + 227)
+#define __NR_get_mempolicy		(__NR_Linux + 228)
+#define __NR_set_mempolicy		(__NR_Linux + 229)
+#define __NR_mq_open			(__NR_Linux + 230)
+#define __NR_mq_unlink			(__NR_Linux + 231)
+#define __NR_mq_timedsend		(__NR_Linux + 232)
+#define __NR_mq_timedreceive		(__NR_Linux + 233)
+#define __NR_mq_notify			(__NR_Linux + 234)
+#define __NR_mq_getsetattr		(__NR_Linux + 235)
+#define __NR_vserver			(__NR_Linux + 236)
+#define __NR_waitid			(__NR_Linux + 237)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 238) */
+#define __NR_add_key			(__NR_Linux + 239)
+#define __NR_request_key		(__NR_Linux + 240)
+#define __NR_keyctl			(__NR_Linux + 241)
+#define __NR_set_thread_area		(__NR_Linux + 242)
+#define __NR_inotify_init		(__NR_Linux + 243)
+#define __NR_inotify_add_watch		(__NR_Linux + 244)
+#define __NR_inotify_rm_watch		(__NR_Linux + 245)
+#define __NR_migrate_pages		(__NR_Linux + 246)
+#define __NR_openat			(__NR_Linux + 247)
+#define __NR_mkdirat			(__NR_Linux + 248)
+#define __NR_mknodat			(__NR_Linux + 249)
+#define __NR_fchownat			(__NR_Linux + 250)
+#define __NR_futimesat			(__NR_Linux + 251)
+#define __NR_newfstatat			(__NR_Linux + 252)
+#define __NR_unlinkat			(__NR_Linux + 253)
+#define __NR_renameat			(__NR_Linux + 254)
+#define __NR_linkat			(__NR_Linux + 255)
+#define __NR_symlinkat			(__NR_Linux + 256)
+#define __NR_readlinkat			(__NR_Linux + 257)
+#define __NR_fchmodat			(__NR_Linux + 258)
+#define __NR_faccessat			(__NR_Linux + 259)
+#define __NR_pselect6			(__NR_Linux + 260)
+#define __NR_ppoll			(__NR_Linux + 261)
+#define __NR_unshare			(__NR_Linux + 262)
+#define __NR_splice			(__NR_Linux + 263)
+#define __NR_sync_file_range		(__NR_Linux + 264)
+#define __NR_tee			(__NR_Linux + 265)
+#define __NR_vmsplice			(__NR_Linux + 266)
+#define __NR_move_pages			(__NR_Linux + 267)
+#define __NR_set_robust_list		(__NR_Linux + 268)
+#define __NR_get_robust_list		(__NR_Linux + 269)
+#define __NR_kexec_load			(__NR_Linux + 270)
+#define __NR_getcpu			(__NR_Linux + 271)
+#define __NR_epoll_pwait		(__NR_Linux + 272)
+#define __NR_ioprio_set			(__NR_Linux + 273)
+#define __NR_ioprio_get			(__NR_Linux + 274)
+#define __NR_utimensat			(__NR_Linux + 275)
+#define __NR_signalfd			(__NR_Linux + 276)
+#define __NR_timerfd			(__NR_Linux + 277)
+#define __NR_eventfd			(__NR_Linux + 278)
+#define __NR_fallocate			(__NR_Linux + 279)
+#define __NR_timerfd_create		(__NR_Linux + 280)
+#define __NR_timerfd_gettime		(__NR_Linux + 281)
+#define __NR_timerfd_settime		(__NR_Linux + 282)
+#define __NR_signalfd4			(__NR_Linux + 283)
+#define __NR_eventfd2			(__NR_Linux + 284)
+#define __NR_epoll_create1		(__NR_Linux + 285)
+#define __NR_dup3			(__NR_Linux + 286)
+#define __NR_pipe2			(__NR_Linux + 287)
+#define __NR_inotify_init1		(__NR_Linux + 288)
+
+/*
+ * Offset of the last Linux 64-bit flavoured syscall
+ */
+#define __NR_Linux_syscalls		288
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define __NR_64_Linux			5000
+#define __NR_64_Linux_syscalls		288
+
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+
+/*
+ * Linux N32 syscalls are in the range from 6000 to 6999.
+ */
+#define __NR_Linux			6000
+#define __NR_read			(__NR_Linux +   0)
+#define __NR_write			(__NR_Linux +   1)
+#define __NR_open			(__NR_Linux +   2)
+#define __NR_close			(__NR_Linux +   3)
+#define __NR_stat			(__NR_Linux +   4)
+#define __NR_fstat			(__NR_Linux +   5)
+#define __NR_lstat			(__NR_Linux +   6)
+#define __NR_poll			(__NR_Linux +   7)
+#define __NR_lseek			(__NR_Linux +   8)
+#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_mprotect			(__NR_Linux +  10)
+#define __NR_munmap			(__NR_Linux +  11)
+#define __NR_brk			(__NR_Linux +  12)
+#define __NR_rt_sigaction		(__NR_Linux +  13)
+#define __NR_rt_sigprocmask		(__NR_Linux +  14)
+#define __NR_ioctl			(__NR_Linux +  15)
+#define __NR_pread64			(__NR_Linux +  16)
+#define __NR_pwrite64			(__NR_Linux +  17)
+#define __NR_readv			(__NR_Linux +  18)
+#define __NR_writev			(__NR_Linux +  19)
+#define __NR_access			(__NR_Linux +  20)
+#define __NR_pipe			(__NR_Linux +  21)
+#define __NR__newselect			(__NR_Linux +  22)
+#define __NR_sched_yield		(__NR_Linux +  23)
+#define __NR_mremap			(__NR_Linux +  24)
+#define __NR_msync			(__NR_Linux +  25)
+#define __NR_mincore			(__NR_Linux +  26)
+#define __NR_madvise			(__NR_Linux +  27)
+#define __NR_shmget			(__NR_Linux +  28)
+#define __NR_shmat			(__NR_Linux +  29)
+#define __NR_shmctl			(__NR_Linux +  30)
+#define __NR_dup			(__NR_Linux +  31)
+#define __NR_dup2			(__NR_Linux +  32)
+#define __NR_pause			(__NR_Linux +  33)
+#define __NR_nanosleep			(__NR_Linux +  34)
+#define __NR_getitimer			(__NR_Linux +  35)
+#define __NR_setitimer			(__NR_Linux +  36)
+#define __NR_alarm			(__NR_Linux +  37)
+#define __NR_getpid			(__NR_Linux +  38)
+#define __NR_sendfile			(__NR_Linux +  39)
+#define __NR_socket			(__NR_Linux +  40)
+#define __NR_connect			(__NR_Linux +  41)
+#define __NR_accept			(__NR_Linux +  42)
+#define __NR_sendto			(__NR_Linux +  43)
+#define __NR_recvfrom			(__NR_Linux +  44)
+#define __NR_sendmsg			(__NR_Linux +  45)
+#define __NR_recvmsg			(__NR_Linux +  46)
+#define __NR_shutdown			(__NR_Linux +  47)
+#define __NR_bind			(__NR_Linux +  48)
+#define __NR_listen			(__NR_Linux +  49)
+#define __NR_getsockname		(__NR_Linux +  50)
+#define __NR_getpeername		(__NR_Linux +  51)
+#define __NR_socketpair			(__NR_Linux +  52)
+#define __NR_setsockopt			(__NR_Linux +  53)
+#define __NR_getsockopt			(__NR_Linux +  54)
+#define __NR_clone			(__NR_Linux +  55)
+#define __NR_fork			(__NR_Linux +  56)
+#define __NR_execve			(__NR_Linux +  57)
+#define __NR_exit			(__NR_Linux +  58)
+#define __NR_wait4			(__NR_Linux +  59)
+#define __NR_kill			(__NR_Linux +  60)
+#define __NR_uname			(__NR_Linux +  61)
+#define __NR_semget			(__NR_Linux +  62)
+#define __NR_semop			(__NR_Linux +  63)
+#define __NR_semctl			(__NR_Linux +  64)
+#define __NR_shmdt			(__NR_Linux +  65)
+#define __NR_msgget			(__NR_Linux +  66)
+#define __NR_msgsnd			(__NR_Linux +  67)
+#define __NR_msgrcv			(__NR_Linux +  68)
+#define __NR_msgctl			(__NR_Linux +  69)
+#define __NR_fcntl			(__NR_Linux +  70)
+#define __NR_flock			(__NR_Linux +  71)
+#define __NR_fsync			(__NR_Linux +  72)
+#define __NR_fdatasync			(__NR_Linux +  73)
+#define __NR_truncate			(__NR_Linux +  74)
+#define __NR_ftruncate			(__NR_Linux +  75)
+#define __NR_getdents			(__NR_Linux +  76)
+#define __NR_getcwd			(__NR_Linux +  77)
+#define __NR_chdir			(__NR_Linux +  78)
+#define __NR_fchdir			(__NR_Linux +  79)
+#define __NR_rename			(__NR_Linux +  80)
+#define __NR_mkdir			(__NR_Linux +  81)
+#define __NR_rmdir			(__NR_Linux +  82)
+#define __NR_creat			(__NR_Linux +  83)
+#define __NR_link			(__NR_Linux +  84)
+#define __NR_unlink			(__NR_Linux +  85)
+#define __NR_symlink			(__NR_Linux +  86)
+#define __NR_readlink			(__NR_Linux +  87)
+#define __NR_chmod			(__NR_Linux +  88)
+#define __NR_fchmod			(__NR_Linux +  89)
+#define __NR_chown			(__NR_Linux +  90)
+#define __NR_fchown			(__NR_Linux +  91)
+#define __NR_lchown			(__NR_Linux +  92)
+#define __NR_umask			(__NR_Linux +  93)
+#define __NR_gettimeofday		(__NR_Linux +  94)
+#define __NR_getrlimit			(__NR_Linux +  95)
+#define __NR_getrusage			(__NR_Linux +  96)
+#define __NR_sysinfo			(__NR_Linux +  97)
+#define __NR_times			(__NR_Linux +  98)
+#define __NR_ptrace			(__NR_Linux +  99)
+#define __NR_getuid			(__NR_Linux + 100)
+#define __NR_syslog			(__NR_Linux + 101)
+#define __NR_getgid			(__NR_Linux + 102)
+#define __NR_setuid			(__NR_Linux + 103)
+#define __NR_setgid			(__NR_Linux + 104)
+#define __NR_geteuid			(__NR_Linux + 105)
+#define __NR_getegid			(__NR_Linux + 106)
+#define __NR_setpgid			(__NR_Linux + 107)
+#define __NR_getppid			(__NR_Linux + 108)
+#define __NR_getpgrp			(__NR_Linux + 109)
+#define __NR_setsid			(__NR_Linux + 110)
+#define __NR_setreuid			(__NR_Linux + 111)
+#define __NR_setregid			(__NR_Linux + 112)
+#define __NR_getgroups			(__NR_Linux + 113)
+#define __NR_setgroups			(__NR_Linux + 114)
+#define __NR_setresuid			(__NR_Linux + 115)
+#define __NR_getresuid			(__NR_Linux + 116)
+#define __NR_setresgid			(__NR_Linux + 117)
+#define __NR_getresgid			(__NR_Linux + 118)
+#define __NR_getpgid			(__NR_Linux + 119)
+#define __NR_setfsuid			(__NR_Linux + 120)
+#define __NR_setfsgid			(__NR_Linux + 121)
+#define __NR_getsid			(__NR_Linux + 122)
+#define __NR_capget			(__NR_Linux + 123)
+#define __NR_capset			(__NR_Linux + 124)
+#define __NR_rt_sigpending		(__NR_Linux + 125)
+#define __NR_rt_sigtimedwait		(__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo		(__NR_Linux + 127)
+#define __NR_rt_sigsuspend		(__NR_Linux + 128)
+#define __NR_sigaltstack		(__NR_Linux + 129)
+#define __NR_utime			(__NR_Linux + 130)
+#define __NR_mknod			(__NR_Linux + 131)
+#define __NR_personality		(__NR_Linux + 132)
+#define __NR_ustat			(__NR_Linux + 133)
+#define __NR_statfs			(__NR_Linux + 134)
+#define __NR_fstatfs			(__NR_Linux + 135)
+#define __NR_sysfs			(__NR_Linux + 136)
+#define __NR_getpriority		(__NR_Linux + 137)
+#define __NR_setpriority		(__NR_Linux + 138)
+#define __NR_sched_setparam		(__NR_Linux + 139)
+#define __NR_sched_getparam		(__NR_Linux + 140)
+#define __NR_sched_setscheduler		(__NR_Linux + 141)
+#define __NR_sched_getscheduler		(__NR_Linux + 142)
+#define __NR_sched_get_priority_max	(__NR_Linux + 143)
+#define __NR_sched_get_priority_min	(__NR_Linux + 144)
+#define __NR_sched_rr_get_interval	(__NR_Linux + 145)
+#define __NR_mlock			(__NR_Linux + 146)
+#define __NR_munlock			(__NR_Linux + 147)
+#define __NR_mlockall			(__NR_Linux + 148)
+#define __NR_munlockall			(__NR_Linux + 149)
+#define __NR_vhangup			(__NR_Linux + 150)
+#define __NR_pivot_root			(__NR_Linux + 151)
+#define __NR__sysctl			(__NR_Linux + 152)
+#define __NR_prctl			(__NR_Linux + 153)
+#define __NR_adjtimex			(__NR_Linux + 154)
+#define __NR_setrlimit			(__NR_Linux + 155)
+#define __NR_chroot			(__NR_Linux + 156)
+#define __NR_sync			(__NR_Linux + 157)
+#define __NR_acct			(__NR_Linux + 158)
+#define __NR_settimeofday		(__NR_Linux + 159)
+#define __NR_mount			(__NR_Linux + 160)
+#define __NR_umount2			(__NR_Linux + 161)
+#define __NR_swapon			(__NR_Linux + 162)
+#define __NR_swapoff			(__NR_Linux + 163)
+#define __NR_reboot			(__NR_Linux + 164)
+#define __NR_sethostname		(__NR_Linux + 165)
+#define __NR_setdomainname		(__NR_Linux + 166)
+#define __NR_create_module		(__NR_Linux + 167)
+#define __NR_init_module		(__NR_Linux + 168)
+#define __NR_delete_module		(__NR_Linux + 169)
+#define __NR_get_kernel_syms		(__NR_Linux + 170)
+#define __NR_query_module		(__NR_Linux + 171)
+#define __NR_quotactl			(__NR_Linux + 172)
+#define __NR_nfsservctl			(__NR_Linux + 173)
+#define __NR_getpmsg			(__NR_Linux + 174)
+#define __NR_putpmsg			(__NR_Linux + 175)
+#define __NR_afs_syscall		(__NR_Linux + 176)
+#define __NR_reserved177		(__NR_Linux + 177)
+#define __NR_gettid			(__NR_Linux + 178)
+#define __NR_readahead			(__NR_Linux + 179)
+#define __NR_setxattr			(__NR_Linux + 180)
+#define __NR_lsetxattr			(__NR_Linux + 181)
+#define __NR_fsetxattr			(__NR_Linux + 182)
+#define __NR_getxattr			(__NR_Linux + 183)
+#define __NR_lgetxattr			(__NR_Linux + 184)
+#define __NR_fgetxattr			(__NR_Linux + 185)
+#define __NR_listxattr			(__NR_Linux + 186)
+#define __NR_llistxattr			(__NR_Linux + 187)
+#define __NR_flistxattr			(__NR_Linux + 188)
+#define __NR_removexattr		(__NR_Linux + 189)
+#define __NR_lremovexattr		(__NR_Linux + 190)
+#define __NR_fremovexattr		(__NR_Linux + 191)
+#define __NR_tkill			(__NR_Linux + 192)
+#define __NR_reserved193		(__NR_Linux + 193)
+#define __NR_futex			(__NR_Linux + 194)
+#define __NR_sched_setaffinity		(__NR_Linux + 195)
+#define __NR_sched_getaffinity		(__NR_Linux + 196)
+#define __NR_cacheflush			(__NR_Linux + 197)
+#define __NR_cachectl			(__NR_Linux + 198)
+#define __NR_sysmips			(__NR_Linux + 199)
+#define __NR_io_setup			(__NR_Linux + 200)
+#define __NR_io_destroy			(__NR_Linux + 201)
+#define __NR_io_getevents		(__NR_Linux + 202)
+#define __NR_io_submit			(__NR_Linux + 203)
+#define __NR_io_cancel			(__NR_Linux + 204)
+#define __NR_exit_group			(__NR_Linux + 205)
+#define __NR_lookup_dcookie		(__NR_Linux + 206)
+#define __NR_epoll_create		(__NR_Linux + 207)
+#define __NR_epoll_ctl			(__NR_Linux + 208)
+#define __NR_epoll_wait			(__NR_Linux + 209)
+#define __NR_remap_file_pages		(__NR_Linux + 210)
+#define __NR_rt_sigreturn		(__NR_Linux + 211)
+#define __NR_fcntl64			(__NR_Linux + 212)
+#define __NR_set_tid_address		(__NR_Linux + 213)
+#define __NR_restart_syscall		(__NR_Linux + 214)
+#define __NR_semtimedop			(__NR_Linux + 215)
+#define __NR_fadvise64			(__NR_Linux + 216)
+#define __NR_statfs64			(__NR_Linux + 217)
+#define __NR_fstatfs64			(__NR_Linux + 218)
+#define __NR_sendfile64			(__NR_Linux + 219)
+#define __NR_timer_create		(__NR_Linux + 220)
+#define __NR_timer_settime		(__NR_Linux + 221)
+#define __NR_timer_gettime		(__NR_Linux + 222)
+#define __NR_timer_getoverrun		(__NR_Linux + 223)
+#define __NR_timer_delete		(__NR_Linux + 224)
+#define __NR_clock_settime		(__NR_Linux + 225)
+#define __NR_clock_gettime		(__NR_Linux + 226)
+#define __NR_clock_getres		(__NR_Linux + 227)
+#define __NR_clock_nanosleep		(__NR_Linux + 228)
+#define __NR_tgkill			(__NR_Linux + 229)
+#define __NR_utimes			(__NR_Linux + 230)
+#define __NR_mbind			(__NR_Linux + 231)
+#define __NR_get_mempolicy		(__NR_Linux + 232)
+#define __NR_set_mempolicy		(__NR_Linux + 233)
+#define __NR_mq_open			(__NR_Linux + 234)
+#define __NR_mq_unlink			(__NR_Linux + 235)
+#define __NR_mq_timedsend		(__NR_Linux + 236)
+#define __NR_mq_timedreceive		(__NR_Linux + 237)
+#define __NR_mq_notify			(__NR_Linux + 238)
+#define __NR_mq_getsetattr		(__NR_Linux + 239)
+#define __NR_vserver			(__NR_Linux + 240)
+#define __NR_waitid			(__NR_Linux + 241)
+/* #define __NR_sys_setaltroot		(__NR_Linux + 242) */
+#define __NR_add_key			(__NR_Linux + 243)
+#define __NR_request_key		(__NR_Linux + 244)
+#define __NR_keyctl			(__NR_Linux + 245)
+#define __NR_set_thread_area		(__NR_Linux + 246)
+#define __NR_inotify_init		(__NR_Linux + 247)
+#define __NR_inotify_add_watch		(__NR_Linux + 248)
+#define __NR_inotify_rm_watch		(__NR_Linux + 249)
+#define __NR_migrate_pages		(__NR_Linux + 250)
+#define __NR_openat			(__NR_Linux + 251)
+#define __NR_mkdirat			(__NR_Linux + 252)
+#define __NR_mknodat			(__NR_Linux + 253)
+#define __NR_fchownat			(__NR_Linux + 254)
+#define __NR_futimesat			(__NR_Linux + 255)
+#define __NR_newfstatat			(__NR_Linux + 256)
+#define __NR_unlinkat			(__NR_Linux + 257)
+#define __NR_renameat			(__NR_Linux + 258)
+#define __NR_linkat			(__NR_Linux + 259)
+#define __NR_symlinkat			(__NR_Linux + 260)
+#define __NR_readlinkat			(__NR_Linux + 261)
+#define __NR_fchmodat			(__NR_Linux + 262)
+#define __NR_faccessat			(__NR_Linux + 263)
+#define __NR_pselect6			(__NR_Linux + 264)
+#define __NR_ppoll			(__NR_Linux + 265)
+#define __NR_unshare			(__NR_Linux + 266)
+#define __NR_splice			(__NR_Linux + 267)
+#define __NR_sync_file_range		(__NR_Linux + 268)
+#define __NR_tee			(__NR_Linux + 269)
+#define __NR_vmsplice			(__NR_Linux + 270)
+#define __NR_move_pages			(__NR_Linux + 271)
+#define __NR_set_robust_list		(__NR_Linux + 272)
+#define __NR_get_robust_list		(__NR_Linux + 273)
+#define __NR_kexec_load			(__NR_Linux + 274)
+#define __NR_getcpu			(__NR_Linux + 275)
+#define __NR_epoll_pwait		(__NR_Linux + 276)
+#define __NR_ioprio_set			(__NR_Linux + 277)
+#define __NR_ioprio_get			(__NR_Linux + 278)
+#define __NR_utimensat			(__NR_Linux + 279)
+#define __NR_signalfd			(__NR_Linux + 280)
+#define __NR_timerfd			(__NR_Linux + 281)
+#define __NR_eventfd			(__NR_Linux + 282)
+#define __NR_fallocate			(__NR_Linux + 283)
+#define __NR_timerfd_create		(__NR_Linux + 284)
+#define __NR_timerfd_gettime		(__NR_Linux + 285)
+#define __NR_timerfd_settime		(__NR_Linux + 286)
+#define __NR_signalfd4			(__NR_Linux + 287)
+#define __NR_eventfd2			(__NR_Linux + 288)
+#define __NR_epoll_create1		(__NR_Linux + 289)
+#define __NR_dup3			(__NR_Linux + 290)
+#define __NR_pipe2			(__NR_Linux + 291)
+#define __NR_inotify_init1		(__NR_Linux + 292)
+
+/*
+ * Offset of the last N32 flavoured syscall
+ */
+#define __NR_Linux_syscalls		292
+
+#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#define __NR_N32_Linux			6000
+#define __NR_N32_Linux_syscalls		292
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+# ifdef CONFIG_32BIT
+#  define __ARCH_WANT_STAT64
+#  define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_MIPS32_O32
+#  define __ARCH_WANT_COMPAT_SYS_TIME
+# endif
+
+/* whitelists for checksyscalls */
+#define __IGNORE_select
+#define __IGNORE_vfork
+#define __IGNORE_time
+#define __IGNORE_uselib
+#define __IGNORE_fadvise64_64
+#define __IGNORE_getdents64
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+#define __IGNORE_truncate64
+#define __IGNORE_ftruncate64
+#define __IGNORE_stat64
+#define __IGNORE_lstat64
+#define __IGNORE_fstat64
+#define __IGNORE_fstatat64
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h
new file mode 100644
index 0000000..afa83a4
--- /dev/null
+++ b/arch/mips/include/asm/user.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the irix-core).  The file
+ * contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	unsigned long	regs[EF_SIZE /		/* integer and fp regs */
+			sizeof(unsigned long) + 64];
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h
new file mode 100644
index 0000000..f4cff7e
--- /dev/null
+++ b/arch/mips/include/asm/vga.h
@@ -0,0 +1,47 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+#include <asm/byteorder.h>
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s)	(0xb0000000L + (unsigned long)(x))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x, y)	(*(y) = (x))
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+	*addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+	return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
new file mode 100644
index 0000000..c6e1b96
--- /dev/null
+++ b/arch/mips/include/asm/vpe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_VPE_H
+#define _ASM_VPE_H
+
+struct vpe_notifications {
+	void (*start)(int vpe);
+	void (*stop)(int vpe);
+
+	struct list_head list;
+};
+
+
+extern int vpe_notify(int index, struct vpe_notifications *notify);
+
+extern void *vpe_get_shared(int index);
+extern int vpe_getuid(int index);
+extern int vpe_getgid(int index);
+extern char *vpe_getcwd(int index);
+
+#endif /* _ASM_VPE_H */
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
new file mode 100644
index 0000000..e0ee05a
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -0,0 +1,43 @@
+/*
+ *  capcella.h, Include file for ZAO Networks Capcella.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ZAO_CAPCELLA_H
+#define __ZAO_CAPCELLA_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define PC104PLUS_INTA_PIN		2
+#define PC104PLUS_INTB_PIN		3
+#define PC104PLUS_INTC_PIN		4
+#define PC104PLUS_INTD_PIN		5
+
+/*
+ * Interrupt Number
+ */
+#define RTL8139_1_IRQ			GIU_IRQ(PC104PLUS_INTC_PIN)
+#define RTL8139_2_IRQ			GIU_IRQ(PC104PLUS_INTD_PIN)
+#define PC104PLUS_INTA_IRQ		GIU_IRQ(PC104PLUS_INTA_PIN)
+#define PC104PLUS_INTB_IRQ		GIU_IRQ(PC104PLUS_INTB_PIN)
+#define PC104PLUS_INTC_IRQ		GIU_IRQ(PC104PLUS_INTC_PIN)
+#define PC104PLUS_INTD_IRQ		GIU_IRQ(PC104PLUS_INTD_PIN)
+
+#endif /* __ZAO_CAPCELLA_H */
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
new file mode 100644
index 0000000..0bcdd3a
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -0,0 +1,78 @@
+/*
+ *  Include file for NEC VR4100 series General-purpose I/O Unit.
+ *
+ *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_GIU_H
+#define __NEC_VR41XX_GIU_H
+
+/*
+ * NEC VR4100 series GIU platform device IDs.
+ */
+enum {
+	GPIO_50PINS_PULLUPDOWN,
+	GPIO_36PINS,
+	GPIO_48PINS_EDGE_SELECT,
+};
+
+typedef enum {
+	IRQ_TRIGGER_LEVEL,
+	IRQ_TRIGGER_EDGE,
+	IRQ_TRIGGER_EDGE_FALLING,
+	IRQ_TRIGGER_EDGE_RISING,
+} irq_trigger_t;
+
+typedef enum {
+	IRQ_SIGNAL_THROUGH,
+	IRQ_SIGNAL_HOLD,
+} irq_signal_t;
+
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+
+typedef enum {
+	IRQ_LEVEL_LOW,
+	IRQ_LEVEL_HIGH,
+} irq_level_t;
+
+extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
+
+typedef enum {
+	GPIO_DATA_LOW,
+	GPIO_DATA_HIGH,
+	GPIO_DATA_INVAL,
+} gpio_data_t;
+
+extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
+extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
+
+typedef enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+	GPIO_OUTPUT_DISABLE,
+} gpio_direction_t;
+
+extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
+
+typedef enum {
+	GPIO_PULL_DOWN,
+	GPIO_PULL_UP,
+	GPIO_PULL_DISABLE,
+} gpio_pull_t;
+
+extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull);
+
+#endif /* __NEC_VR41XX_GIU_H */
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
new file mode 100644
index 0000000..d315dfb
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-mips/vr41xx/irq.h
+ *
+ * Interrupt numbers for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_IRQ_H
+#define __NEC_VR41XX_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE	0
+#define MIPS_CPU_IRQ(x)		(MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ	MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ	MIPS_CPU_IRQ(1)
+#define INT0_IRQ		MIPS_CPU_IRQ(2)
+#define INT1_IRQ		MIPS_CPU_IRQ(3)
+#define INT2_IRQ		MIPS_CPU_IRQ(4)
+#define INT3_IRQ		MIPS_CPU_IRQ(5)
+#define INT4_IRQ		MIPS_CPU_IRQ(6)
+#define TIMER_IRQ		MIPS_CPU_IRQ(7)
+
+/*
+ * SYINT1 Interrupt Numbers
+ */
+#define SYSINT1_IRQ_BASE	8
+#define SYSINT1_IRQ(x)		(SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ		SYSINT1_IRQ(0)
+#define POWER_IRQ		SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ		SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ		SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ			SYSINT1_IRQ(5)
+#define AIU_IRQ			SYSINT1_IRQ(6)
+#define KIU_IRQ			SYSINT1_IRQ(7)
+#define GIUINT_IRQ		SYSINT1_IRQ(8)
+#define SIU_IRQ			SYSINT1_IRQ(9)
+#define BUSERR_IRQ		SYSINT1_IRQ(10)
+#define SOFTINT_IRQ		SYSINT1_IRQ(11)
+#define CLKRUN_IRQ		SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ		SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST	DOZEPIU_IRQ
+
+/*
+ * SYSINT2 Interrupt Numbers
+ */
+#define SYSINT2_IRQ_BASE	24
+#define SYSINT2_IRQ(x)		(SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ		SYSINT2_IRQ(0)
+#define LED_IRQ			SYSINT2_IRQ(1)
+#define HSP_IRQ			SYSINT2_IRQ(2)
+#define TCLOCK_IRQ		SYSINT2_IRQ(3)
+#define FIR_IRQ			SYSINT2_IRQ(4)
+#define CEU_IRQ			SYSINT2_IRQ(4)	/* same number as FIR_IRQ */
+#define DSIU_IRQ		SYSINT2_IRQ(5)
+#define PCI_IRQ			SYSINT2_IRQ(6)
+#define SCU_IRQ			SYSINT2_IRQ(7)
+#define CSI_IRQ			SYSINT2_IRQ(8)
+#define BCU_IRQ			SYSINT2_IRQ(9)
+#define ETHERNET_IRQ		SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST	ETHERNET_IRQ
+
+/*
+ * GIU Interrupt Numbers
+ */
+#define GIU_IRQ_BASE		40
+#define GIU_IRQ(x)		(GIU_IRQ_BASE + (x))	/* IRQ 40-71 */
+#define GIU_IRQ_LAST		GIU_IRQ(31)
+
+/*
+ * VRC4173 Interrupt Numbers
+ */
+#define VRC4173_IRQ_BASE	72
+#define VRC4173_IRQ(x)		(VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ		VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ	VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ	VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ	VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ	VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ		VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ		VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ		VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ		VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ	VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ	VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ	VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST	VRC4173_DOZEPIU_IRQ
+
+#endif /* __NEC_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
new file mode 100644
index 0000000..1d67df8
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -0,0 +1,37 @@
+/*
+ *  mpc30x.h, Include file for Victor MP-C303/304.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __VICTOR_MPC30X_H
+#define __VICTOR_MPC30X_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define VRC4173_PIN			1
+#define MQ200_PIN			4
+
+/*
+ * Interrupt Number
+ */
+#define VRC4173_CASCADE_IRQ		GIU_IRQ(VRC4173_PIN)
+#define MQ200_IRQ			GIU_IRQ(MQ200_PIN)
+
+#endif /* __VICTOR_MPC30X_H */
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
new file mode 100644
index 0000000..6fc01ce
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -0,0 +1,90 @@
+/*
+ *  Include file for NEC VR4100 series PCI Control Unit.
+ *
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_PCI_H
+#define __NEC_VR41XX_PCI_H
+
+#define PCI_MASTER_ADDRESS_MASK	0x7fffffffU
+
+struct pci_master_address_conversion {
+	uint32_t bus_base_address;
+	uint32_t address_mask;
+	uint32_t pci_base_address;
+};
+
+struct pci_target_address_conversion {
+	uint32_t address_mask;
+	uint32_t bus_base_address;
+};
+
+typedef enum {
+	CANNOT_LOCK_FROM_DEVICE,
+	CAN_LOCK_FROM_DEVICE,
+} pci_exclusive_access_t;
+
+struct pci_mailbox_address {
+	uint32_t base_address;
+};
+
+struct pci_target_address_window {
+	uint32_t base_address;
+};
+
+typedef enum {
+	PCI_ARBITRATION_MODE_FAIR,
+	PCI_ARBITRATION_MODE_ALTERNATE_0,
+	PCI_ARBITRATION_MODE_ALTERNATE_B,
+} pci_arbiter_priority_control_t;
+
+typedef enum {
+	PCI_TAKE_AWAY_GNT_DISABLE,
+	PCI_TAKE_AWAY_GNT_ENABLE,
+} pci_take_away_gnt_mode_t;
+
+struct pci_controller_unit_setup {
+	struct pci_master_address_conversion *master_memory1;
+	struct pci_master_address_conversion *master_memory2;
+
+	struct pci_target_address_conversion *target_memory1;
+	struct pci_target_address_conversion *target_memory2;
+
+	struct pci_master_address_conversion *master_io;
+
+	pci_exclusive_access_t exclusive_access;
+
+	uint32_t pci_clock_max;
+	uint8_t wait_time_limit_from_irdy_to_trdy;	/* Only VR4122 is supported */
+
+	struct pci_mailbox_address *mailbox;
+	struct pci_target_address_window *target_window1;
+	struct pci_target_address_window *target_window2;
+
+	uint8_t master_latency_timer;
+	uint8_t retry_limit;
+
+	pci_arbiter_priority_control_t arbiter_priority_control;
+	pci_take_away_gnt_mode_t take_away_gnt_mode;
+
+	struct resource *mem_resource;
+	struct resource *io_resource;
+};
+
+extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup);
+
+#endif /* __NEC_VR41XX_PCI_H */
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
new file mode 100644
index 0000000..da9f6e3
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -0,0 +1,58 @@
+/*
+ *  Include file for NEC VR4100 series Serial Interface Unit.
+ *
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __NEC_VR41XX_SIU_H
+#define __NEC_VR41XX_SIU_H
+
+#define SIU_PORTS_MAX 2
+
+typedef enum {
+	SIU_INTERFACE_RS232C,
+	SIU_INTERFACE_IRDA,
+} siu_interface_t;
+
+extern void vr41xx_select_siu_interface(siu_interface_t interface);
+
+typedef enum {
+	SIU_USE_IRDA,
+	FIR_USE_IRDA,
+} irda_use_t;
+
+extern void vr41xx_use_irda(irda_use_t use);
+
+typedef enum {
+	SHARP_IRDA,
+	TEMIC_IRDA,
+	HP_IRDA,
+} irda_module_t;
+
+typedef enum {
+	IRDA_TX_1_5MBPS,
+	IRDA_TX_4MBPS,
+} irda_speed_t;
+
+extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_early_setup(struct uart_port *port);
+#else
+static inline void vr41xx_siu_early_setup(struct uart_port *port) {}
+#endif
+
+#endif /* __NEC_VR41XX_SIU_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
new file mode 100644
index 0000000..dc981b4
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -0,0 +1,42 @@
+/*
+ *  tb0219.h, Include file for TANBAC TB0219.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  Modified for TANBAC TB0219:
+ *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0219_H
+#define __TANBAC_TB0219_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0219_PCI_SLOT1_PIN		2
+#define TB0219_PCI_SLOT2_PIN		3
+#define TB0219_PCI_SLOT3_PIN		4
+
+/*
+ * Interrupt Number
+ */
+#define TB0219_PCI_SLOT1_IRQ		GIU_IRQ(TB0219_PCI_SLOT1_PIN)
+#define TB0219_PCI_SLOT2_IRQ		GIU_IRQ(TB0219_PCI_SLOT2_PIN)
+#define TB0219_PCI_SLOT3_IRQ		GIU_IRQ(TB0219_PCI_SLOT3_PIN)
+
+#endif /* __TANBAC_TB0219_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
new file mode 100644
index 0000000..de527dc
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -0,0 +1,43 @@
+/*
+ *  tb0226.h, Include file for TANBAC TB0226.
+ *
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0226_H
+#define __TANBAC_TB0226_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define GD82559_1_PIN			2
+#define GD82559_2_PIN			3
+#define UPD720100_INTA_PIN		4
+#define UPD720100_INTB_PIN		8
+#define UPD720100_INTC_PIN		13
+
+/*
+ * Interrupt Number
+ */
+#define GD82559_1_IRQ			GIU_IRQ(GD82559_1_PIN)
+#define GD82559_2_IRQ			GIU_IRQ(GD82559_2_PIN)
+#define UPD720100_INTA_IRQ		GIU_IRQ(UPD720100_INTA_PIN)
+#define UPD720100_INTB_IRQ		GIU_IRQ(UPD720100_INTB_PIN)
+#define UPD720100_INTC_IRQ		GIU_IRQ(UPD720100_INTC_PIN)
+
+#endif /* __TANBAC_TB0226_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h
new file mode 100644
index 0000000..61bead6
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0287.h
@@ -0,0 +1,43 @@
+/*
+ *  tb0287.h, Include file for TANBAC TB0287 mini-ITX board.
+ *
+ *  Copyright (C) 2005  Media Lab Inc. <ito@mlb.co.jp>
+ *
+ *  This code is largely based on tb0219.h.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TANBAC_TB0287_H
+#define __TANBAC_TB0287_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0287_PCI_SLOT_PIN		2
+#define TB0287_SM501_PIN		3
+#define TB0287_SIL680A_PIN		8
+#define TB0287_RTL8110_PIN		13
+
+/*
+ * Interrupt Number
+ */
+#define TB0287_PCI_SLOT_IRQ		GIU_IRQ(TB0287_PCI_SLOT_PIN)
+#define TB0287_SM501_IRQ		GIU_IRQ(TB0287_SM501_PIN)
+#define TB0287_SIL680A_IRQ		GIU_IRQ(TB0287_SIL680A_PIN)
+#define TB0287_RTL8110_IRQ		GIU_IRQ(TB0287_RTL8110_PIN)
+
+#endif /* __TANBAC_TB0287_H */
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
new file mode 100644
index 0000000..22be649
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-mips/vr41xx/vr41xx.h
+ *
+ * Include file for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_H
+#define __NEC_VR41XX_H
+
+#include <linux/interrupt.h>
+
+/*
+ * CPU Revision
+ */
+/* VR4122 0x00000c70-0x00000c72 */
+#define PRID_VR4122_REV1_0	0x00000c70
+#define PRID_VR4122_REV2_0	0x00000c70
+#define PRID_VR4122_REV2_1	0x00000c70
+#define PRID_VR4122_REV3_0	0x00000c71
+#define PRID_VR4122_REV3_1	0x00000c72
+
+/* VR4181A 0x00000c73-0x00000c7f */
+#define PRID_VR4181A_REV1_0	0x00000c73
+#define PRID_VR4181A_REV1_1	0x00000c74
+
+/* VR4131 0x00000c80-0x00000c83 */
+#define PRID_VR4131_REV1_2	0x00000c80
+#define PRID_VR4131_REV2_0	0x00000c81
+#define PRID_VR4131_REV2_1	0x00000c82
+#define PRID_VR4131_REV2_2	0x00000c83
+
+/* VR4133 0x00000c84- */
+#define PRID_VR4133		0x00000c84
+
+/*
+ * Bus Control Uint
+ */
+extern unsigned long vr41xx_calculate_clock_frequency(void);
+extern unsigned long vr41xx_get_vtclock_frequency(void);
+extern unsigned long vr41xx_get_tclock_frequency(void);
+
+/*
+ * Clock Mask Unit
+ */
+typedef enum {
+	PIU_CLOCK,
+	SIU_CLOCK,
+	AIU_CLOCK,
+	KIU_CLOCK,
+	FIR_CLOCK,
+	DSIU_CLOCK,
+	CSI_CLOCK,
+	PCIU_CLOCK,
+	HSP_CLOCK,
+	PCI_CLOCK,
+	CEU_CLOCK,
+	ETHER0_CLOCK,
+	ETHER1_CLOCK
+} vr41xx_clock_t;
+
+extern void vr41xx_supply_clock(vr41xx_clock_t clock);
+extern void vr41xx_mask_clock(vr41xx_clock_t clock);
+
+/*
+ * Interrupt Control Unit
+ */
+extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
+extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int));
+
+#define PIUINT_COMMAND		0x0040
+#define PIUINT_DATA		0x0020
+#define PIUINT_PAGE1		0x0010
+#define PIUINT_PAGE0		0x0008
+#define PIUINT_DATALOST		0x0004
+#define PIUINT_STATUSCHANGE	0x0001
+
+extern void vr41xx_enable_piuint(uint16_t mask);
+extern void vr41xx_disable_piuint(uint16_t mask);
+
+#define AIUINT_INPUT_DMAEND	0x0800
+#define AIUINT_INPUT_DMAHALT	0x0400
+#define AIUINT_INPUT_DATALOST	0x0200
+#define AIUINT_INPUT_DATA	0x0100
+#define AIUINT_OUTPUT_DMAEND	0x0008
+#define AIUINT_OUTPUT_DMAHALT	0x0004
+#define AIUINT_OUTPUT_NODATA	0x0002
+
+extern void vr41xx_enable_aiuint(uint16_t mask);
+extern void vr41xx_disable_aiuint(uint16_t mask);
+
+#define KIUINT_DATALOST		0x0004
+#define KIUINT_DATAREADY	0x0002
+#define KIUINT_SCAN		0x0001
+
+extern void vr41xx_enable_kiuint(uint16_t mask);
+extern void vr41xx_disable_kiuint(uint16_t mask);
+
+#define DSIUINT_CTS		0x0800
+#define DSIUINT_RXERR		0x0400
+#define DSIUINT_RX		0x0200
+#define DSIUINT_TX		0x0100
+#define DSIUINT_ALL		0x0f00
+
+extern void vr41xx_enable_dsiuint(uint16_t mask);
+extern void vr41xx_disable_dsiuint(uint16_t mask);
+
+#define FIRINT_UNIT		0x0010
+#define FIRINT_RX_DMAEND	0x0008
+#define FIRINT_RX_DMAHALT	0x0004
+#define FIRINT_TX_DMAEND	0x0002
+#define FIRINT_TX_DMAHALT	0x0001
+
+extern void vr41xx_enable_firint(uint16_t mask);
+extern void vr41xx_disable_firint(uint16_t mask);
+
+extern void vr41xx_enable_pciint(void);
+extern void vr41xx_disable_pciint(void);
+
+extern void vr41xx_enable_scuint(void);
+extern void vr41xx_disable_scuint(void);
+
+#define CSIINT_TX_DMAEND	0x0040
+#define CSIINT_TX_DMAHALT	0x0020
+#define CSIINT_TX_DATA		0x0010
+#define CSIINT_TX_FIFOEMPTY	0x0008
+#define CSIINT_RX_DMAEND	0x0004
+#define CSIINT_RX_DMAHALT	0x0002
+#define CSIINT_RX_FIFOEMPTY	0x0001
+
+extern void vr41xx_enable_csiint(uint16_t mask);
+extern void vr41xx_disable_csiint(uint16_t mask);
+
+extern void vr41xx_enable_bcuint(void);
+extern void vr41xx_disable_bcuint(void);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_setup(void);
+#else
+static inline void vr41xx_siu_setup(void) {}
+#endif
+
+#endif /* __NEC_VR41XX_H */
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
new file mode 100644
index 0000000..22361d5
--- /dev/null
+++ b/arch/mips/include/asm/war.h
@@ -0,0 +1,244 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#ifndef _ASM_WAR_H
+#define _ASM_WAR_H
+
+#include <war.h>
+
+/*
+ * Work around certain R4000 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed immediately after starting an integer division:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #28
+ *   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ *   #19
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed while an integer multiplication is in progress:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   errata #16 & #28
+ *
+ * - An integer division may give an incorrect result if started in
+ *   a delay slot of a taken branch or a jump:
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #52
+ */
+#ifdef CONFIG_CPU_R4000_WORKAROUNDS
+#define R4000_WAR 1
+#else
+#define R4000_WAR 0
+#endif
+
+/*
+ * Work around certain R4400 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ *   if executed immediately after starting an integer division:
+ *   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
+ *   "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
+ */
+#ifdef CONFIG_CPU_R4400_WORKAROUNDS
+#define R4400_WAR 1
+#else
+#define R4400_WAR 0
+#endif
+
+/*
+ * Work around the "daddi" and "daddiu" CPU errata:
+ *
+ * - The `daddi' instruction fails to trap on overflow.
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #23
+ *
+ * - The `daddiu' instruction can produce an incorrect result.
+ *   "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ *   erratum #41
+ *   "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ *   #15
+ *   "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
+ *   "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
+ */
+#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_WAR 1
+#else
+#define DADDI_WAR 0
+#endif
+
+/*
+ * Another R4600 erratum.  Due to the lack of errata information the exact
+ * technical details aren't known.  I've experimentally found that disabling
+ * interrupts during indexed I-cache flushes seems to be sufficient to deal
+ * with the issue.
+ */
+#ifndef R4600_V1_INDEX_ICACHEOP_WAR
+#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform
+#endif
+
+/*
+ * Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
+ *
+ *  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+ *      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+ *      executed if there is no other dcache activity. If the dcache is
+ *      accessed for another instruction immeidately preceding when these
+ *      cache instructions are executing, it is possible that the dcache
+ *      tag match outputs used by these cache instructions will be
+ *      incorrect. These cache instructions should be preceded by at least
+ *      four instructions that are not any kind of load or store
+ *      instruction.
+ *
+ *      This is not allowed:    lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ *
+ *      This is allowed:        lw
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              nop
+ *                              cache       Hit_Writeback_Invalidate_D
+ */
+#ifndef R4600_V1_HIT_CACHEOP_WAR
+#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
+#endif
+
+
+/*
+ * Writeback and invalidate the primary cache dcache before DMA.
+ *
+ * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+ * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+ * operate correctly if the internal data cache refill buffer is empty.  These
+ * CACHE instructions should be separated from any potential data cache miss
+ * by a load instruction to an uncached address to empty the response buffer."
+ * (Revision 2.0 device errata from IDT available on http://www.idt.com/
+ * in .pdf format.)
+ */
+#ifndef R4600_V2_HIT_CACHEOP_WAR
+#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
+#endif
+
+/*
+ * When an interrupt happens on a CP0 register read instruction, CPU may
+ * lock up or read corrupted values of CP0 registers after it enters
+ * the exception handler.
+ *
+ * This workaround makes sure that we read a "safe" CP0 register as the
+ * first thing in the exception handler, which breaks one of the
+ * pre-conditions for this problem.
+ */
+#ifndef R5432_CP0_INTERRUPT_WAR
+#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform
+#endif
+
+/*
+ * Workaround for the Sibyte M3 errata the text of which can be found at
+ *
+ *   http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
+ *
+ * This will enable the use of a special TLB refill handler which does a
+ * consistency check on the information in c0_badvaddr and c0_entryhi and
+ * will just return and take the exception again if the information was
+ * found to be inconsistent.
+ */
+#ifndef BCM1250_M3_WAR
+#error Check setting of BCM1250_M3_WAR for your platform
+#endif
+
+/*
+ * This is a DUART workaround related to glitches around register accesses
+ */
+#ifndef SIBYTE_1956_WAR
+#error Check setting of SIBYTE_1956_WAR for your platform
+#endif
+
+/*
+ * Fill buffers not flushed on CACHE instructions
+ *
+ * Hit_Invalidate_I cacheops invalidate an icache line but the refill
+ * for that line can get stale data from the fill buffer instead of
+ * accessing memory if the previous icache miss was also to that line.
+ *
+ * Workaround: generate an icache refill from a different line
+ *
+ * Affects:
+ *  MIPS 4K		RTL revision <3.0, PRID revision <4
+ */
+#ifndef MIPS4K_ICACHE_REFILL_WAR
+#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform
+#endif
+
+/*
+ * Missing implicit forced flush of evictions caused by CACHE
+ * instruction
+ *
+ * Evictions caused by a CACHE instructions are not forced on to the
+ * bus. The BIU gives higher priority to fetches than to the data from
+ * the eviction buffer and no collision detection is performed between
+ * fetches and pending data from the eviction buffer.
+ *
+ * Workaround: Execute a SYNC instruction after the cache instruction
+ *
+ * Affects:
+ *   MIPS 5Kc,5Kf	RTL revision <2.3, PRID revision <8
+ *   MIPS 20Kc		RTL revision <4.0, PRID revision <?
+ */
+#ifndef MIPS_CACHE_SYNC_WAR
+#error Check setting of MIPS_CACHE_SYNC_WAR for your platform
+#endif
+
+/*
+ * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+ * the line which this instruction itself exists, the following
+ * operation is not guaranteed."
+ *
+ * Workaround: do two phase flushing for Index_Invalidate_I
+ */
+#ifndef TX49XX_ICACHE_INDEX_INV_WAR
+#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform
+#endif
+
+/*
+ * On the RM9000 there is a problem which makes the CreateDirtyExclusive
+ * eache operation unusable on SMP systems.
+ */
+#ifndef RM9000_CDEX_SMP_WAR
+#error Check setting of RM9000_CDEX_SMP_WAR for your platform
+#endif
+
+/*
+ * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+ * opposes it being called that) where invalid instructions in the same
+ * I-cache line worth of instructions being fetched may case spurious
+ * exceptions.
+ */
+#ifndef ICACHE_REFILLS_WORKAROUND_WAR
+#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform
+#endif
+
+/*
+ * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * may cause ll / sc and lld / scd sequences to execute non-atomically.
+ */
+#ifndef R10000_LLSC_WAR
+#error Check setting of R10000_LLSC_WAR for your platform
+#endif
+
+/*
+ * 34K core erratum: "Problems Executing the TLBR Instruction"
+ */
+#ifndef MIPS34K_MISSED_ITLB_WAR
+#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform
+#endif
+
+#endif /* _ASM_WAR_H */
diff --git a/arch/mips/include/asm/wbflush.h b/arch/mips/include/asm/wbflush.h
new file mode 100644
index 0000000..eadc0ac
--- /dev/null
+++ b/arch/mips/include/asm/wbflush.h
@@ -0,0 +1,34 @@
+/*
+ * Header file for using the wbflush routine
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_WBFLUSH_H
+#define _ASM_WBFLUSH_H
+
+
+#ifdef CONFIG_CPU_HAS_WB
+
+extern void (*__wbflush)(void);
+extern void wbflush_setup(void);
+
+#define wbflush()			\
+	do {				\
+		__sync();		\
+		__wbflush();		\
+	} while (0)
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wbflush_setup() do { } while (0)
+
+#define wbflush() fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#endif /* _ASM_WBFLUSH_H */
diff --git a/arch/mips/include/asm/xor.h b/arch/mips/include/asm/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/arch/mips/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
new file mode 100644
index 0000000..79bac88
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xtalk.h -- platform-independent crosstalk interface, derived from
+ * IRIX <sys/PCI/bridge.h>, revision 1.38.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XTALK_H
+#define _ASM_XTALK_XTALK_H
+
+#ifndef __ASSEMBLY__
+/*
+ * User-level device driver visible types
+ */
+typedef char            xwidgetnum_t;	/* xtalk widget number  (0..15) */
+
+#define XWIDGET_NONE		-1
+
+typedef int xwidget_part_num_t;	/* xtalk widget part number */
+
+#define XWIDGET_PART_NUM_NONE	-1
+
+typedef int             xwidget_rev_num_t;	/* xtalk widget revision number */
+
+#define XWIDGET_REV_NUM_NONE	-1
+
+typedef int xwidget_mfg_num_t;	/* xtalk widget manufacturing ID */
+
+#define XWIDGET_MFG_NUM_NONE	-1
+
+typedef struct xtalk_piomap_s *xtalk_piomap_t;
+
+/* It is often convenient to fold the XIO target port
+ * number into the XIO address.
+ */
+#define	XIO_NOWHERE	(0xFFFFFFFFFFFFFFFFull)
+#define	XIO_ADDR_BITS	(0x0000FFFFFFFFFFFFull)
+#define	XIO_PORT_BITS	(0xF000000000000000ull)
+#define	XIO_PORT_SHIFT	(60)
+
+#define	XIO_PACKED(x)	(((x)&XIO_PORT_BITS) != 0)
+#define	XIO_ADDR(x)	((x)&XIO_ADDR_BITS)
+#define	XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
+#define	XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
new file mode 100644
index 0000000..b4a13d7
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xwidget.h - generic crosstalk widget header file, derived from IRIX
+ * <sys/xtalk/xtalkwidget.h>, revision 1.32.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XWIDGET_H
+#define _ASM_XTALK_XWIDGET_H
+
+#include <linux/types.h>
+#include <asm/xtalk/xtalk.h>
+
+#define WIDGET_ID			0x04
+#define WIDGET_STATUS			0x0c
+#define WIDGET_ERR_UPPER_ADDR		0x14
+#define WIDGET_ERR_LOWER_ADDR		0x1c
+#define WIDGET_CONTROL			0x24
+#define WIDGET_REQ_TIMEOUT		0x2c
+#define WIDGET_INTDEST_UPPER_ADDR	0x34
+#define WIDGET_INTDEST_LOWER_ADDR	0x3c
+#define WIDGET_ERR_CMD_WORD		0x44
+#define WIDGET_LLP_CFG			0x4c
+#define WIDGET_TFLUSH			0x54
+
+/* WIDGET_ID */
+#define WIDGET_REV_NUM			0xf0000000
+#define WIDGET_PART_NUM			0x0ffff000
+#define WIDGET_MFG_NUM			0x00000ffe
+#define WIDGET_REV_NUM_SHFT		28
+#define WIDGET_PART_NUM_SHFT		12
+#define WIDGET_MFG_NUM_SHFT		1
+
+#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT)
+#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT)
+#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT)
+
+/* WIDGET_STATUS */
+#define WIDGET_LLP_REC_CNT		0xff000000
+#define WIDGET_LLP_TX_CNT		0x00ff0000
+#define WIDGET_PENDING			0x0000001f
+
+/* WIDGET_ERR_UPPER_ADDR */
+#define	WIDGET_ERR_UPPER_ADDR_ONLY	0x0000ffff
+
+/* WIDGET_CONTROL */
+#define WIDGET_F_BAD_PKT		0x00010000
+#define WIDGET_LLP_XBAR_CRD		0x0000f000
+#define	WIDGET_LLP_XBAR_CRD_SHFT	12
+#define WIDGET_CLR_RLLP_CNT		0x00000800
+#define WIDGET_CLR_TLLP_CNT		0x00000400
+#define WIDGET_SYS_END			0x00000200
+#define WIDGET_MAX_TRANS		0x000001f0
+#define WIDGET_WIDGET_ID		0x0000000f
+
+/* WIDGET_INTDEST_UPPER_ADDR */
+#define WIDGET_INT_VECTOR		0xff000000
+#define WIDGET_INT_VECTOR_SHFT		24
+#define WIDGET_TARGET_ID		0x000f0000
+#define WIDGET_TARGET_ID_SHFT		16
+#define WIDGET_UPP_ADDR			0x0000ffff
+
+/* WIDGET_ERR_CMD_WORD */
+#define WIDGET_DIDN			0xf0000000
+#define WIDGET_SIDN			0x0f000000
+#define WIDGET_PACTYP			0x00f00000
+#define WIDGET_TNUM			0x000f8000
+#define WIDGET_COHERENT			0x00004000
+#define WIDGET_DS			0x00003000
+#define WIDGET_GBR			0x00000800
+#define WIDGET_VBPM			0x00000400
+#define WIDGET_ERROR			0x00000200
+#define WIDGET_BARRIER			0x00000100
+
+/* WIDGET_LLP_CFG */
+#define WIDGET_LLP_MAXRETRY		0x03ff0000
+#define WIDGET_LLP_MAXRETRY_SHFT	16
+#define WIDGET_LLP_NULLTIMEOUT		0x0000fc00
+#define WIDGET_LLP_NULLTIMEOUT_SHFT	10
+#define WIDGET_LLP_MAXBURST		0x000003ff
+#define WIDGET_LLP_MAXBURST_SHFT	0
+
+/*
+ * according to the crosstalk spec, only 32-bits access to the widget
+ * configuration registers is allowed.  some widgets may allow 64-bits
+ * access but software should not depend on it.  registers beyond the
+ * widget target flush register are widget dependent thus will not be
+ * defined here
+ */
+#ifndef __ASSEMBLY__
+typedef u32 widgetreg_t;
+
+/* widget configuration registers */
+typedef volatile struct widget_cfg {
+	widgetreg_t		w_pad_0;		/* 0x00 */
+	widgetreg_t		w_id;			/* 0x04 */
+	widgetreg_t		w_pad_1;		/* 0x08 */
+	widgetreg_t		w_status;		/* 0x0c */
+	widgetreg_t		w_pad_2;		/* 0x10 */
+	widgetreg_t		w_err_upper_addr;	/* 0x14 */
+	widgetreg_t		w_pad_3;		/* 0x18 */
+	widgetreg_t		w_err_lower_addr;	/* 0x1c */
+	widgetreg_t		w_pad_4;		/* 0x20 */
+	widgetreg_t		w_control;		/* 0x24 */
+	widgetreg_t		w_pad_5;		/* 0x28 */
+	widgetreg_t		w_req_timeout;		/* 0x2c */
+	widgetreg_t		w_pad_6;		/* 0x30 */
+	widgetreg_t		w_intdest_upper_addr;	/* 0x34 */
+	widgetreg_t		w_pad_7;		/* 0x38 */
+	widgetreg_t		w_intdest_lower_addr;	/* 0x3c */
+	widgetreg_t		w_pad_8;		/* 0x40 */
+	widgetreg_t		w_err_cmd_word;		/* 0x44 */
+	widgetreg_t		w_pad_9;		/* 0x48 */
+	widgetreg_t		w_llp_cfg;		/* 0x4c */
+	widgetreg_t		w_pad_10;		/* 0x50 */
+	widgetreg_t		w_tflush;		/* 0x54 */
+} widget_cfg_t;
+
+typedef struct {
+	unsigned	didn:4;
+	unsigned	sidn:4;
+	unsigned	pactyp:4;
+	unsigned	tnum:5;
+	unsigned	ct:1;
+	unsigned	ds:2;
+	unsigned	gbr:1;
+	unsigned	vbpm:1;
+	unsigned	error:1;
+	unsigned	bo:1;
+	unsigned	other:8;
+} w_err_cmd_word_f;
+
+typedef union {
+	widgetreg_t		r;
+	w_err_cmd_word_f	f;
+} w_err_cmd_word_u;
+
+typedef struct xwidget_info_s *xwidget_info_t;
+
+/*
+ * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec.
+ */
+typedef struct xwidget_hwid_s {
+	xwidget_part_num_t	part_num;
+	xwidget_rev_num_t	rev_num;
+	xwidget_mfg_num_t	mfg_num;
+} *xwidget_hwid_t;
+
+
+/*
+ * Returns 1 if a driver that handles devices described by hwid1 is able
+ * to manage a device with hardwareid hwid2.  NOTE: We don't check rev
+ * numbers at all.
+ */
+#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \
+	(((hwid1)->part_num == (hwid2)->part_num) && \
+	(((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+	((hwid1)->mfg_num == (hwid2)->mfg_num)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XWIDGET_H */