diff options
author | Jason Yeh <jason.yeh@amd.com> | 2008-07-23 23:05:53 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-07-26 11:48:16 +0200 |
commit | 1a960b402a51d80abf54e3f8e4972374ffe5f22d (patch) | |
tree | 108222afe94df145e7a71f44bb077067c35f0131 /arch/x86/oprofile | |
parent | 6852fd9b86d05063c6ef49d2e12e061cc7f6a105 (diff) | |
download | kernel_samsung_aries-1a960b402a51d80abf54e3f8e4972374ffe5f22d.zip kernel_samsung_aries-1a960b402a51d80abf54e3f8e4972374ffe5f22d.tar.gz kernel_samsung_aries-1a960b402a51d80abf54e3f8e4972374ffe5f22d.tar.bz2 |
Oprofile Multiplexing Patch
This patch introduces multiplexing support for the Oprofile kernel
module. It basically adds a new function pointer in oprofile_operator
allowing each architecture to supply its callback to switch between
different sets of event when the timer expires. Userspace tools can
modify the time slice through /dev/oprofile/time_slice.
It also modifies the number of counters exposed to the userspace through
/dev/oprofile. For example, the number of counters for AMD CPUs are
changed to 32 and multiplexed in the sets of 4.
Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/oprofile')
-rw-r--r-- | arch/x86/oprofile/nmi_int.c | 100 | ||||
-rw-r--r-- | arch/x86/oprofile/op_counter.h | 3 | ||||
-rw-r--r-- | arch/x86/oprofile/op_model_amd.c | 76 | ||||
-rw-r--r-- | arch/x86/oprofile/op_model_p4.c | 4 | ||||
-rw-r--r-- | arch/x86/oprofile/op_model_ppro.c | 2 | ||||
-rw-r--r-- | arch/x86/oprofile/op_x86_model.h | 3 |
6 files changed, 149 insertions, 39 deletions
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 287513a..2a65fe7 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -23,12 +23,18 @@ #include "op_counter.h" #include "op_x86_model.h" +DEFINE_PER_CPU(int, switch_index); + static struct op_x86_model_spec const *model; static DEFINE_PER_CPU(struct op_msrs, cpu_msrs); static DEFINE_PER_CPU(unsigned long, saved_lvtpc); static int nmi_start(void); static void nmi_stop(void); +static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs); +static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs); +static void nmi_cpu_stop(void *dummy); +static void nmi_cpu_start(void *dummy); /* 0 == registered but off, 1 == registered and on */ static int nmi_enabled = 0; @@ -81,6 +87,47 @@ static void exit_sysfs(void) #define exit_sysfs() do { } while (0) #endif /* CONFIG_PM */ +static void nmi_cpu_switch(void *dummy) +{ + int cpu = smp_processor_id(); + int si = per_cpu(switch_index, cpu); + struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu); + + nmi_cpu_stop(NULL); + nmi_cpu_save_mpx_registers(msrs); + + /* move to next set */ + si += model->num_hardware_counters; + if ((si > model->num_counters) || (counter_config[si].count == 0)) + per_cpu(switch_index, smp_processor_id()) = 0; + else + per_cpu(switch_index, smp_processor_id()) = si; + + nmi_cpu_restore_mpx_registers(msrs); + model->setup_ctrs(msrs); + nmi_cpu_start(NULL); +} + +/* + * Quick check to see if multiplexing is necessary. + * The check should be sufficient since counters are used + * in ordre. + */ +static int nmi_multiplex_on(void) +{ + return counter_config[model->num_hardware_counters].count ? 0 : -EINVAL; +} + +static int nmi_switch_event(void) +{ + if (nmi_multiplex_on() < 0) + return -EINVAL; + + on_each_cpu(nmi_cpu_switch, NULL, 0, 1); + + return 0; +} + static int profile_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { @@ -144,11 +191,10 @@ static void free_msrs(void) static int allocate_msrs(void) { - int success = 1; + int i, success = 1; size_t controls_size = sizeof(struct op_msr) * model->num_controls; size_t counters_size = sizeof(struct op_msr) * model->num_counters; - int i; for_each_possible_cpu(i) { per_cpu(cpu_msrs, i).counters = kmalloc(counters_size, GFP_KERNEL); @@ -156,8 +202,8 @@ static int allocate_msrs(void) success = 0; break; } - per_cpu(cpu_msrs, i).controls = kmalloc(controls_size, - GFP_KERNEL); + per_cpu(cpu_msrs, i).controls = + kmalloc(controls_size, GFP_KERNEL); if (!per_cpu(cpu_msrs, i).controls) { success = 0; break; @@ -201,7 +247,8 @@ static int nmi_setup(void) return err; } - /* We need to serialize save and setup for HT because the subset + /* + * We need to serialize save and setup for HT because the subset * of msrs are distinct for save and setup operations */ @@ -217,7 +264,6 @@ static int nmi_setup(void) per_cpu(cpu_msrs, 0).controls, sizeof(struct op_msr) * model->num_controls); } - } on_each_cpu(nmi_save_registers, NULL, 1); on_each_cpu(nmi_cpu_setup, NULL, 1); @@ -225,7 +271,41 @@ static int nmi_setup(void) return 0; } -static void nmi_restore_registers(struct op_msrs *msrs) +static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs) +{ + unsigned int si = __get_cpu_var(switch_index); + unsigned int const nr_ctrs = model->num_hardware_counters; + struct op_msr *counters = &msrs->counters[si]; + unsigned int i; + + for (i = 0; i < nr_ctrs; ++i) { + int offset = i + si; + if (counters[offset].addr) { + rdmsr(counters[offset].addr, + counters[offset].multiplex.low, + counters[offset].multiplex.high); + } + } +} + +static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs) +{ + unsigned int si = __get_cpu_var(switch_index); + unsigned int const nr_ctrs = model->num_hardware_counters; + struct op_msr *counters = &msrs->counters[si]; + unsigned int i; + + for (i = 0; i < nr_ctrs; ++i) { + int offset = i + si; + if (counters[offset].addr) { + wrmsr(counters[offset].addr, + counters[offset].multiplex.low, + counters[offset].multiplex.high); + } + } +} + +static void nmi_cpu_restore_registers(struct op_msrs *msrs) { unsigned int const nr_ctrs = model->num_counters; unsigned int const nr_ctrls = model->num_controls; @@ -265,7 +345,8 @@ static void nmi_cpu_shutdown(void *dummy) apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu)); apic_write(APIC_LVTERR, v); - nmi_restore_registers(msrs); + nmi_cpu_restore_registers(msrs); + __get_cpu_var(switch_index) = 0; } static void nmi_shutdown(void) @@ -328,6 +409,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask); oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user); + counter_config[i].save_count_low = 0; } return 0; @@ -469,12 +551,14 @@ int __init op_nmi_init(struct oprofile_operations *ops) } /* default values, can be overwritten by model */ + __get_cpu_var(switch_index) = 0; ops->create_files = nmi_create_files; ops->setup = nmi_setup; ops->shutdown = nmi_shutdown; ops->start = nmi_start; ops->stop = nmi_stop; ops->cpu_type = cpu_type; + ops->switch_events = nmi_switch_event; if (model->init) ret = model->init(ops); diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h index 2880b15..786d6e0 100644 --- a/arch/x86/oprofile/op_counter.h +++ b/arch/x86/oprofile/op_counter.h @@ -10,13 +10,14 @@ #ifndef OP_COUNTER_H #define OP_COUNTER_H -#define OP_MAX_COUNTER 8 +#define OP_MAX_COUNTER 32 /* Per-perfctr configuration as set via * oprofilefs. */ struct op_counter_config { unsigned long count; + unsigned long save_count_low; unsigned long enabled; unsigned long event; unsigned long kernel; diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index d9faf60..bbf2b68 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -15,6 +15,7 @@ #include <linux/oprofile.h> #include <linux/device.h> #include <linux/pci.h> +#include <linux/percpu.h> #include <asm/ptrace.h> #include <asm/msr.h> @@ -23,8 +24,10 @@ #include "op_x86_model.h" #include "op_counter.h" -#define NUM_COUNTERS 4 -#define NUM_CONTROLS 4 +#define NUM_COUNTERS 32 +#define NUM_HARDWARE_COUNTERS 4 +#define NUM_CONTROLS 32 +#define NUM_HARDWARE_CONTROLS 4 #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) @@ -48,6 +51,7 @@ #define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8)) static unsigned long reset_value[NUM_COUNTERS]; +DECLARE_PER_CPU(int, switch_index); #ifdef CONFIG_OPROFILE_IBS @@ -130,15 +134,17 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs) int i; for (i = 0; i < NUM_COUNTERS; i++) { - if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i)) - msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; + int hw_counter = i % NUM_HARDWARE_COUNTERS; + if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + hw_counter)) + msrs->counters[i].addr = MSR_K7_PERFCTR0 + hw_counter; else msrs->counters[i].addr = 0; } for (i = 0; i < NUM_CONTROLS; i++) { - if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) - msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; + int hw_control = i % NUM_HARDWARE_CONTROLS; + if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + hw_control)) + msrs->controls[i].addr = MSR_K7_EVNTSEL0 + hw_control; else msrs->controls[i].addr = 0; } @@ -150,8 +156,16 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs) unsigned int low, high; int i; + for (i = 0; i < NUM_HARDWARE_CONTROLS; ++i) { + int offset = i + __get_cpu_var(switch_index); + if (counter_config[offset].enabled) + reset_value[offset] = counter_config[offset].count; + else + reset_value[offset] = 0; + } + /* clear all counters */ - for (i = 0 ; i < NUM_CONTROLS; ++i) { + for (i = 0 ; i < NUM_HARDWARE_CONTROLS; ++i) { if (unlikely(!CTRL_IS_RESERVED(msrs, i))) continue; CTRL_READ(low, high, msrs, i); @@ -161,34 +175,31 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs) } /* avoid a false detection of ctr overflows in NMI handler */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) { if (unlikely(!CTR_IS_RESERVED(msrs, i))) continue; CTR_WRITE(1, msrs, i); } /* enable active counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { - if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) { - reset_value[i] = counter_config[i].count; - - CTR_WRITE(counter_config[i].count, msrs, i); + for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) { + int offset = i + __get_cpu_var(switch_index); + if ((counter_config[offset].enabled) && (CTR_IS_RESERVED(msrs, i))) { + CTR_WRITE(counter_config[offset].count, msrs, i); CTRL_READ(low, high, msrs, i); CTRL_CLEAR_LO(low); CTRL_CLEAR_HI(high); CTRL_SET_ENABLE(low); - CTRL_SET_USR(low, counter_config[i].user); - CTRL_SET_KERN(low, counter_config[i].kernel); - CTRL_SET_UM(low, counter_config[i].unit_mask); - CTRL_SET_EVENT_LOW(low, counter_config[i].event); - CTRL_SET_EVENT_HIGH(high, counter_config[i].event); + CTRL_SET_USR(low, counter_config[offset].user); + CTRL_SET_KERN(low, counter_config[offset].kernel); + CTRL_SET_UM(low, counter_config[offset].unit_mask); + CTRL_SET_EVENT_LOW(low, counter_config[offset].event); + CTRL_SET_EVENT_HIGH(high, counter_config[offset].event); CTRL_SET_HOST_ONLY(high, 0); CTRL_SET_GUEST_ONLY(high, 0); CTRL_WRITE(low, high, msrs, i); - } else { - reset_value[i] = 0; } } } @@ -276,13 +287,14 @@ static int op_amd_check_ctrs(struct pt_regs * const regs, unsigned int low, high; int i; - for (i = 0 ; i < NUM_COUNTERS; ++i) { - if (!reset_value[i]) + for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) { + int offset = i + __get_cpu_var(switch_index); + if (!reset_value[offset]) continue; CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { - oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], msrs, i); + oprofile_add_sample(regs, offset); + CTR_WRITE(reset_value[offset], msrs, i); } } @@ -298,8 +310,10 @@ static void op_amd_start(struct op_msrs const * const msrs) { unsigned int low, high; int i; - for (i = 0 ; i < NUM_COUNTERS ; ++i) { - if (reset_value[i]) { + + for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) { + int offset = i + __get_cpu_var(switch_index); + if (reset_value[offset]) { CTRL_READ(low, high, msrs, i); CTRL_SET_ACTIVE(low); CTRL_WRITE(low, high, msrs, i); @@ -329,8 +343,8 @@ static void op_amd_stop(struct op_msrs const * const msrs) /* Subtle: stop on all counters to avoid race with * setting our pm callback */ - for (i = 0 ; i < NUM_COUNTERS ; ++i) { - if (!reset_value[i]) + for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) { + if (!reset_value[i + per_cpu(switch_index, smp_processor_id())]) continue; CTRL_READ(low, high, msrs, i); CTRL_SET_INACTIVE(low); @@ -356,11 +370,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs) { int i; - for (i = 0 ; i < NUM_COUNTERS ; ++i) { + for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) { if (CTR_IS_RESERVED(msrs, i)) release_perfctr_nmi(MSR_K7_PERFCTR0 + i); } - for (i = 0 ; i < NUM_CONTROLS ; ++i) { + for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) { if (CTRL_IS_RESERVED(msrs, i)) release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); } @@ -534,6 +548,8 @@ struct op_x86_model_spec const op_amd_spec = { .exit = op_amd_exit, .num_counters = NUM_COUNTERS, .num_controls = NUM_CONTROLS, + .num_hardware_counters = NUM_HARDWARE_COUNTERS, + .num_hardware_controls = NUM_HARDWARE_CONTROLS, .fill_in_addresses = &op_amd_fill_in_addresses, .setup_ctrs = &op_amd_setup_ctrs, .check_ctrs = &op_amd_check_ctrs, diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c index 56b4757..e641545 100644 --- a/arch/x86/oprofile/op_model_p4.c +++ b/arch/x86/oprofile/op_model_p4.c @@ -701,6 +701,8 @@ static void p4_shutdown(struct op_msrs const * const msrs) struct op_x86_model_spec const op_p4_ht2_spec = { .num_counters = NUM_COUNTERS_HT2, .num_controls = NUM_CONTROLS_HT2, + .num_hardware_counters = NUM_COUNTERS_HT2, + .num_hardware_controls = NUM_CONTROLS_HT2, .fill_in_addresses = &p4_fill_in_addresses, .setup_ctrs = &p4_setup_ctrs, .check_ctrs = &p4_check_ctrs, @@ -713,6 +715,8 @@ struct op_x86_model_spec const op_p4_ht2_spec = { struct op_x86_model_spec const op_p4_spec = { .num_counters = NUM_COUNTERS_NON_HT, .num_controls = NUM_CONTROLS_NON_HT, + .num_hardware_counters = NUM_COUNTERS_NON_HT, + .num_hardware_controls = NUM_CONTROLS_NON_HT, .fill_in_addresses = &p4_fill_in_addresses, .setup_ctrs = &p4_setup_ctrs, .check_ctrs = &p4_check_ctrs, diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index eff431f..e5811aa 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -183,6 +183,8 @@ static void ppro_shutdown(struct op_msrs const * const msrs) struct op_x86_model_spec const op_ppro_spec = { .num_counters = NUM_COUNTERS, .num_controls = NUM_CONTROLS, + .num_hardware_counters = NUM_COUNTERS, + .num_hardware_controls = NUM_CONTROLS, .fill_in_addresses = &ppro_fill_in_addresses, .setup_ctrs = &ppro_setup_ctrs, .check_ctrs = &ppro_check_ctrs, diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h index 05a0261..e07ba10 100644 --- a/arch/x86/oprofile/op_x86_model.h +++ b/arch/x86/oprofile/op_x86_model.h @@ -19,6 +19,7 @@ struct op_saved_msr { struct op_msr { unsigned long addr; struct op_saved_msr saved; + struct op_saved_msr multiplex; }; struct op_msrs { @@ -34,6 +35,8 @@ struct pt_regs; struct op_x86_model_spec { int (*init)(struct oprofile_operations *ops); void (*exit)(void); + unsigned int const num_hardware_counters; + unsigned int const num_hardware_controls; unsigned int const num_counters; unsigned int const num_controls; void (*fill_in_addresses)(struct op_msrs * const msrs); |