Merge branch 'clps7500' into devel

Conflicts:

	arch/arm/Kconfig

22 files changed, 0 insertions, 1180 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a041997..29759cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -247,16 +247,6 @@ config ARCH_AT91
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
 
-config ARCH_CLPS7500
-	bool "Cirrus CL-PS7500FE"
-	select CPU_ARM710
-	select TIMER_ACORN
-	select ISA
-	select NO_IOPORT
-	select ARCH_SPARSEMEM_ENABLE
-	help
-	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd6e281..2eca299 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -96,7 +96,6 @@ textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index c47f2a3..fbe5eef 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_L7200),y)
 OBJS		+= head-l7200.o
 endif
 
-ifeq ($(CONFIG_ARCH_CLPS7500),y)
-HEAD		= head-clps7500.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
deleted file mode 100644
index 4f3c78a..0000000
--- a/arch/arm/boot/compressed/head-clps7500.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-clps7500.S
- *
- * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
- */
-
-
-		/* There are three different ways the kernel can be
-		   booted on a 7500 system: from Angel (loaded in RAM), from
-		   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
-		   image does for them all. */
-		/* This branch is taken if the CPU memory width matches the
-		   actual device in use.  The default at power on is 16 bits
-		   so we must be prepared for a mismatch. */
-		.section ".start", "ax"
-2:
-		b	1f
-		.word	0xffff
-		.word	0xb632		@ mov r11, #0x03200000
-		.word	0xe3a0
-		.word	0x0000		@ mov r0, #0
-		.word	0xe3a0
-		.word	0x0080		@ strb r0, [r11, #0x80]
-		.word	0xe5cb
-		.word	0xf000		@ mov pc, #0
-		.word	0xe3a0
-1:
-		adr	r1, 2b
-		teq	r1, #0
-		bne	.Langel
-		/* This is a direct-from-ROM boot.  Copy the kernel into 
-		   RAM and run it there. */
-		mov	r0, #0x30
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, #0x13
-		msr	cpsr_cxsf, r0
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0x5500
-		str	r0, [r12]
-		mov	r0, #0x10000000
-		orr	r0, r0, #0x8000
-		mov	r4, r0
-		ldr	r2, =_end
-2:
-		ldr	r3, [r1], #4
-		str	r3, [r0], #4
-		teq	r0, r2
-		bne	2b
-		mov	r0, #0xff00
-		str	r0, [r12]
-1:	
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0xfe00
-		str	r0, [r12]
-
-		adr	lr, 1f
-		mov	r0, #0
-		mov	r1, #14		/* MACH_TYPE_CLPS7500 */
-		mov	pc, lr
-.Langel:
-#ifdef CONFIG_ANGELBOOT
-		/* Call Angel to switch into SVC mode. */
-		mov	r0, #0x17
-		swi	0x123456
-#endif
-		/* Ensure all interrupts are off and MMU disabled */
-		mrs	r0, cpsr
-		orr	r0, r0, #0xc0
-		msr	cpsr_cxsf, r0
-
-		adr	lr, 1b
-		orr	lr, lr, #0x10000000
-		mov	r0, #0x30		@ MMU off
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, r0
-	 	mov	pc, lr
-
-		.ltorg
-
-1:
-/* And the rest */
-#include "head.S"
diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
index 9c5afbd..f9ee69e 100644
--- a/arch/arm/include/asm/hardware/iomd.h
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -32,19 +32,11 @@
 #define IOMD_KARTRX	(0x004)
 #define IOMD_KCTRL	(0x008)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IOLINES	(0x00C)
-#endif
-
 #define IOMD_IRQSTATA	(0x010)
 #define IOMD_IRQREQA	(0x014)
 #define IOMD_IRQCLRA	(0x014)
 #define IOMD_IRQMASKA	(0x018)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_SUSMODE	(0x01C)
-#endif
-
 #define IOMD_IRQSTATB	(0x020)
 #define IOMD_IRQREQB	(0x024)
 #define IOMD_IRQMASKB	(0x028)
@@ -53,10 +45,6 @@
 #define IOMD_FIQREQ	(0x034)
 #define IOMD_FIQMASK	(0x038)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_CLKCTL	(0x03C)
-#endif
-
 #define IOMD_T0CNTL	(0x040)
 #define IOMD_T0LTCHL	(0x040)
 #define IOMD_T0CNTH	(0x044)
@@ -71,18 +59,6 @@
 #define IOMD_T1GO	(0x058)
 #define IOMD_T1LATCH	(0x05c)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IRQSTATC	(0x060)
-#define IOMD_IRQREQC	(0x064)
-#define IOMD_IRQMASKC	(0x068)
-
-#define IOMD_VIDMUX	(0x06c)
-
-#define IOMD_IRQSTATD	(0x070)
-#define IOMD_IRQREQD	(0x074)
-#define IOMD_IRQMASKD	(0x078)
-#endif
-
 #define IOMD_ROMCR0	(0x080)
 #define IOMD_ROMCR1	(0x084)
 #ifdef CONFIG_ARCH_RPC
@@ -100,11 +76,6 @@
 #define IOMD_MOUSEY	(0x0A4)
 #endif
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_MSEDAT	(0x0A8)
-#define IOMD_MSECTL	(0x0Ac)
-#endif
-
 #ifdef CONFIG_ARCH_RPC
 #define IOMD_DMATCR	(0x0C0)
 #endif
@@ -113,18 +84,6 @@
 #ifdef CONFIG_ARCH_RPC
 #define IOMD_DMAEXT	(0x0CC)
 #endif
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_ASTCR	(0x0CC)
-#define IOMD_DRAMCR	(0x0D0)
-#define IOMD_SELFREF	(0x0D4)
-#define IOMD_ATODICR	(0x0E0)
-#define IOMD_ATODSR	(0x0E4)
-#define IOMD_ATODCC	(0x0E8)
-#define IOMD_ATODCNT1	(0x0EC)
-#define IOMD_ATODCNT2	(0x0F0)
-#define IOMD_ATODCNT3	(0x0F4)
-#define IOMD_ATODCNT4	(0x0F8)
-#endif
 
 #ifdef CONFIG_ARCH_RPC
 #define DMA_EXT_IO0	1
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 30351cd..866f84a 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -38,7 +38,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_CLPS7500)	+= io-acorn.o
 lib-$(CONFIG_ARCH_L7200)	+= io-acorn.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
diff --git a/arch/arm/mach-clps7500/Makefile b/arch/arm/mach-clps7500/Makefile
deleted file mode 100644
index 4bd8ebd..0000000
--- a/arch/arm/mach-clps7500/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/arch/arm/mach-clps7500/Makefile.boot b/arch/arm/mach-clps7500/Makefile.boot
deleted file mode 100644
index fe16506..0000000
--- a/arch/arm/mach-clps7500/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0x10008000
-
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
deleted file mode 100644
index 7e247c0..0000000
--- a/arch/arm/mach-clps7500/core.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps7500/core.c
- *
- *  Copyright (C) 1998 Russell King
- *  Copyright (C) 1999 Nexus Electronics Ltd
- *
- * Extra MM routines for CL7500 architecture
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-unsigned int vram_size;
-
-static void cl7500_ack_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-	iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void cl7500_mask_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void cl7500_unmask_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val | mask, IOMD_IRQMASKA);
-}
-
-static struct irq_chip clps7500_a_chip = {
-	.ack	= cl7500_ack_irq_a,
-	.mask	= cl7500_mask_irq_a,
-	.unmask	= cl7500_unmask_irq_a,
-};
-
-static void cl7500_mask_irq_b(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKB);
-}
-
-static void cl7500_unmask_irq_b(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val | mask, IOMD_IRQMASKB);
-}
-
-static struct irq_chip clps7500_b_chip = {
-	.ack	= cl7500_mask_irq_b,
-	.mask	= cl7500_mask_irq_b,
-	.unmask	= cl7500_unmask_irq_b,
-};
-
-static void cl7500_mask_irq_c(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKC);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKC);
-}
-
-static void cl7500_unmask_irq_c(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKC);
-	iomd_writeb(val | mask, IOMD_IRQMASKC);
-}
-
-static struct irq_chip clps7500_c_chip = {
-	.ack	= cl7500_mask_irq_c,
-	.mask	= cl7500_mask_irq_c,
-	.unmask	= cl7500_unmask_irq_c,
-};
-
-static void cl7500_mask_irq_d(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKD);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKD);
-}
-
-static void cl7500_unmask_irq_d(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKD);
-	iomd_writeb(val | mask, IOMD_IRQMASKD);
-}
-
-static struct irq_chip clps7500_d_chip = {
-	.ack	= cl7500_mask_irq_d,
-	.mask	= cl7500_mask_irq_d,
-	.unmask	= cl7500_unmask_irq_d,
-};
-
-static void cl7500_mask_irq_dma(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val & ~mask, IOMD_DMAMASK);
-}
-
-static void cl7500_unmask_irq_dma(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val | mask, IOMD_DMAMASK);
-}
-
-static struct irq_chip clps7500_dma_chip = {
-	.ack	= cl7500_mask_irq_dma,
-	.mask	= cl7500_mask_irq_dma,
-	.unmask	= cl7500_unmask_irq_dma,
-};
-
-static void cl7500_mask_irq_fiq(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void cl7500_unmask_irq_fiq(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip clps7500_fiq_chip = {
-	.ack	= cl7500_mask_irq_fiq,
-	.mask	= cl7500_mask_irq_fiq,
-	.unmask	= cl7500_unmask_irq_fiq,
-};
-
-static void cl7500_no_action(unsigned int irq)
-{
-}
-
-static struct irq_chip clps7500_no_chip = {
-	.ack	= cl7500_no_action,
-	.mask	= cl7500_no_action,
-	.unmask	= cl7500_no_action,
-};
-
-static struct irqaction irq_isa = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "isa",
-};
-
-static void __init clps7500_init_irq(void)
-{
-	unsigned int irq, flags;
-
-	iomd_writeb(0, IOMD_IRQMASKA);
-	iomd_writeb(0, IOMD_IRQMASKB);
-	iomd_writeb(0, IOMD_FIQMASK);
-	iomd_writeb(0, IOMD_DMAMASK);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		flags = IRQF_VALID;
-
-		if (irq <= 6 || (irq >= 9 && irq <= 15) ||
-		    (irq >= 48 && irq <= 55))
-			flags |= IRQF_PROBE;
-
-		switch (irq) {
-		case 0 ... 7:
-			set_irq_chip(irq, &clps7500_a_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 8 ... 15:
-			set_irq_chip(irq, &clps7500_b_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 16 ... 22:
-			set_irq_chip(irq, &clps7500_dma_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 24 ... 31:
-			set_irq_chip(irq, &clps7500_c_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 40 ... 47:
-			set_irq_chip(irq, &clps7500_d_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 48 ... 55:
-			set_irq_chip(irq, &clps7500_no_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 64 ... 72:
-			set_irq_chip(irq, &clps7500_fiq_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-		}
-	}
-
-	setup_irq(IRQ_ISA, &irq_isa);
-}
-
-static struct map_desc cl7500_io_desc[] __initdata = {
-	{ 	/* IO space	*/
-		.virtual	= (unsigned long)IO_BASE,
-		.pfn		= __phys_to_pfn(IO_START),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* ISA space	*/
-		.virtual	= ISA_BASE,
-		.pfn		= __phys_to_pfn(ISA_START),
-		.length		= ISA_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Flash	*/
-		.virtual	= CLPS7500_FLASH_BASE,
-		.pfn		= __phys_to_pfn(CLPS7500_FLASH_START),
-		.length		= CLPS7500_FLASH_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* LED		*/
-		.virtual	= LED_BASE,
-		.pfn		= __phys_to_pfn(LED_START),
-		.length		= LED_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init clps7500_map_io(void)
-{
-	iotable_init(cl7500_io_desc, ARRAY_SIZE(cl7500_io_desc));
-}
-
-extern void ioctime_init(void);
-extern unsigned long ioc_timer_gettimeoffset(void);
-
-static irqreturn_t
-clps7500_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-
-	/* Why not using do_leds interface?? */
-	{
-		/* Twinkle the lights. */
-		static int count, state = 0xff00;
-		if (count-- == 0) {
-			state ^= 0x100;
-			count = 25;
-			*((volatile unsigned int *)LED_ADDRESS) = state;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps7500_timer_irq = {
-	.name		= "CLPS7500 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= clps7500_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init clps7500_timer_init(void)
-{
-	ioctime_init();
-	setup_irq(IRQ_TIMER, &clps7500_timer_irq);
-}
-
-static struct sys_timer clps7500_timer = {
-	.init		= clps7500_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= 0x03010fe0,
-		.irq		= 10,
-		.uartclk	= 1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= 0x03010be0,
-		.irq		= 0,
-		.uartclk	= 1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= ISASLOT_IO + 0x2e8,
-		.irq		= 41,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= ISASLOT_IO + 0x3e8,
-		.irq		= 40,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static void __init clps7500_init(void)
-{
-	platform_device_register(&serial_device);
-}
-
-MACHINE_START(CLPS7500, "CL-PS7500")
-	/* Maintainer: Philip Blundell */
-	.phys_io	= 0x03000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.map_io		= clps7500_map_io,
-	.init_irq	= clps7500_init_irq,
-	.init_machine	= clps7500_init,
-	.timer		= &clps7500_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps7500/include/mach/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
deleted file mode 100644
index aea6330..0000000
--- a/arch/arm/mach-clps7500/include/mach/acornfb.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int bandwidth;
-  
-	vidc->control |= VIDC20_CTRL_PIX_CK;
-
-	/* Calculate bandwidth */
-	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
-
-	/* Encode bandwidth as VIDC20 setting */
-	if (bandwidth > 16667*2)
-		vidc->control |= VIDC20_CTRL_FIFO_16;
-	else if (bandwidth > 13333*2)
-		vidc->control |= VIDC20_CTRL_FIFO_20;
-	else if (bandwidth > 11111*2)
-		vidc->control |= VIDC20_CTRL_FIFO_24;
-	else
-		vidc->control |= VIDC20_CTRL_FIFO_28;
-
-	vidc->pll_ctl  = 0x2020;
-}
-
-#ifdef CONFIG_CHRONTEL_7003
-#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
-#else
-#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
-#endif
-
-#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
deleted file mode 100644
index af4104e..0000000
--- a/arch/arm/mach-clps7500/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-clps7500/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
deleted file mode 100644
index 63fcde5..0000000
--- a/arch/arm/mach-clps7500/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#define DMA_S0			0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
deleted file mode 100644
index 4e7e541..0000000
--- a/arch/arm/mach-clps7500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
deleted file mode 100644
index a6ad1d4..0000000
--- a/arch/arm/mach-clps7500/include/mach/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the 
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define ISA_START		0x0c000000	/* ISA */
-#define ISA_SIZE		0x00010000
-#define ISA_BASE		0xe1000000
-
-#define CLPS7500_FLASH_START	0x01000000	/* XXX */
-#define CLPS7500_FLASH_SIZE	0x01000000
-#define CLPS7500_FLASH_BASE	0xe2000000
-
-#define LED_START		0x0302B000
-#define LED_SIZE		0x00001000
-#define LED_BASE		0xe3000000
-#define LED_ADDRESS		(LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define VIDC_BASE		(void __iomem *)0xe0400000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO		0x80400000
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
deleted file mode 100644
index 2ff2860..0000000
--- a/arch/arm/mach-clps7500/include/mach/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/io.h
- *  from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port << 2));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port << 2));			\
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)								\
-	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)			__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
deleted file mode 100644
index d02fcf2..0000000
--- a/arch/arm/mach-clps7500/include/mach/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- *   10-10-1996	RMK	Brought up to date with arch-sa110eval
- *   22-08-1998	RMK	Restructured IRQ routines
- *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
- */
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
-	if (irq == IRQ_ISA) {
-		int isabits = *((volatile unsigned int *)0xe002b700);
-		if (isabits == 0) {
-			printk("Spurious ISA IRQ!\n");
-			return irq;
-		}
-		irq = IRQ_ISA_BASE;
-		while (!(isabits & 1)) {
-			irq++;
-			isabits >>= 1;
-		}
-	}
-
-	return irq;
-}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
deleted file mode 100644
index bee66b4..0000000
--- a/arch/arm/mach-clps7500/include/mach/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2		0
-#define IRQ_INT1		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_FORCE		7
-#define IRQ_INT8		8
-#define IRQ_ISA			9
-#define IRQ_INT6		10
-#define IRQ_INT5		11
-#define IRQ_INT4		12
-#define IRQ_INT3		13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define IRQ_IOP0		24
-#define IRQ_IOP1		25
-#define IRQ_IOP2		26
-#define IRQ_IOP3		27
-#define IRQ_IOP4		28
-#define IRQ_IOP5		29
-#define IRQ_IOP6		30
-#define IRQ_IOP7		31
-
-#define IRQ_MOUSERX		40
-#define IRQ_MOUSETX		41
-#define IRQ_ADC			42
-#define IRQ_EVENT1		43
-#define IRQ_EVENT2		44
-
-#define IRQ_ISA_BASE		48
-#define IRQ_ISA_3		48
-#define IRQ_ISA_4		49
-#define IRQ_ISA_5		50
-#define IRQ_ISA_7		51
-#define IRQ_ISA_9		52
-#define IRQ_ISA_10		53
-#define IRQ_ISA_11		54
-#define IRQ_ISA_14		55	
-
-#define FIQ_INT9		0
-#define FIQ_INT5		1
-#define FIQ_INT6		4
-#define FIQ_INT8		6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
deleted file mode 100644
index 87b32db..0000000
--- a/arch/arm/mach-clps7500/include/mach/memory.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- *  20-Oct-1996	RMK	Created
- *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
- *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
- *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
- *  21-Mar-1999	RMK	Renamed to memory.h
- *		RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-/*
- * Sparsemem support.  Each section is a maximum of 64MB.  The sections
- * are offset by 128MB and can cover 128MB, so that gives us a maximum
- * of 29 physmem bits.
- */
-#define MAX_PHYSMEM_BITS	29
-#define SECTION_SIZE_BITS	26
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
deleted file mode 100644
index 6d325fb..0000000
--- a/arch/arm/mach-clps7500/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline void arch_idle(void)
-{
-	iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode)			\
-	do {					\
-		iomd_writeb(0, IOMD_ROMCR0);	\
-		cpu_reset(0);			\
-	} while (0)
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
deleted file mode 100644
index dfaa9b4..0000000
--- a/arch/arm/mach-clps7500/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
deleted file mode 100644
index d7d0af4..0000000
--- a/arch/arm/mach-clps7500/include/mach/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
-	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
-		barrier();
-
-	*((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	int baud = 3686400 / (9600 * 32);
-
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
-	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
-	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
-	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
deleted file mode 100644
index 8fc5406..0000000
--- a/arch/arm/mach-clps7500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)