Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  ARM/OMAP: Remove the +x bit from a couple of source files
  omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values
  OMAP4: fix temporary hacks that break multi-omap PM
  OMAP2: cpu_is_omap2*: fix compile-time removal of unused code
  omap3: pandora: add missing i2c3 board_info
  omap: mach-omap2/io.c: fix function declarations
  omap: Fix gpio_resume_after_retention
  omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board
  omap: Checkpatch cleanup for blizzard.h
  omap: pass the reboot command to the boot loader
  omap2/3/4: mailbox: remove compiler warning
  OMAP2: serial.c: Fix number of uarts in early_init
  omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors
  omap2: Update n8x0 defconfig to test multi-omap and DMA api changes
  omap2: add USB initialization for tusb6010
  omap4: Fix build break by moving omap_smc1 into a separate .S
  omap2/3/4: ehci: avoid compiler error with touchbook
  omap3: Fix compile for Touch Book early_param

42 files changed, 403 insertions, 132 deletions

diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 893cd26..032b49ba 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -358,7 +358,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 75cae18..de0c28a 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -308,6 +308,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index e6f667c..216ad00 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -191,6 +191,7 @@ CONFIG_ARCH_OMAP=y
 #
 CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
 # CONFIG_ARCH_OMAP3 is not set
 # CONFIG_ARCH_OMAP4 is not set
@@ -198,8 +199,6 @@ CONFIG_ARCH_OMAP2=y
 #
 # OMAP Feature Selections
 #
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
@@ -208,15 +207,13 @@ CONFIG_OMAP_MBOX_FWK=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP Core Type
 #
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
 # CONFIG_ARCH_OMAP2430 is not set
 
@@ -227,6 +224,9 @@ CONFIG_MACH_OMAP2_TUSB6010=y
 # CONFIG_MACH_OMAP_H4 is not set
 # CONFIG_MACH_OMAP_APOLLON is not set
 # CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N800=y
+CONFIG_MACH_NOKIA_N810=y
+CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
 
 #
@@ -303,7 +303,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -337,7 +337,14 @@ CONFIG_HAVE_AOUT=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -617,7 +624,55 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_SMBUS is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -673,15 +728,44 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+CONFIG_MENELAUS=y
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -718,7 +802,10 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -737,9 +824,10 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_TUSB6010=y
 # CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 # CONFIG_USB_INVENTRA_DMA is not set
 # CONFIG_USB_TI_CPPI_DMA is not set
@@ -824,44 +912,77 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
 CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -886,8 +1007,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index c7999f5..5a9e95f 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -324,6 +324,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 714835e..d6ad921 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -450,7 +450,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index e2ad859..a6dd6d1 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -340,6 +340,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 74fe6be..968fbaa 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -368,7 +368,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index bb2917e..ddde429 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -363,6 +363,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index d25c3d4..609f348 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -361,7 +361,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 5231895..91ef2ed 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -331,6 +331,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index a82e813..f5c6e11 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -343,6 +343,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index ff8ac3d..ea9a501 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -361,7 +361,7 @@ CONFIG_SUSPEND=y
 # CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 193bd33..45135ff 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -322,6 +322,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2069fb3..4b9fc57 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -22,6 +22,9 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o
+
+AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a101029..5822bcf 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -648,7 +648,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 4386d2b..a0a2a11 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,7 +54,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 180ac11..b88f28c 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -50,33 +50,9 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 };
 
 #ifdef CONFIG_CACHE_L2X0
-noinline void omap_smc1(u32 fn, u32 arg)
-{
-	register u32 r12 asm("r12") = fn;
-	register u32 r0 asm("r0") = arg;
-
-	/* This is common routine cache secure monitor API used to
-	 * modify the PL310 secure registers.
-	 * r0 contains the value to be modified and "r12" contains
-	 * the monitor API number. It uses few CPU registers
-	 * internally and hence they need be backed up including
-	 * link register "lr".
-	 * Explicitly save r11 and r12 the compiler generated code
-	 * won't save it.
-	 */
-	asm volatile(
-		"stmfd r13!, {r11,r12}\n"
-		"dsb\n"
-		"smc\n"
-		"ldmfd r13!, {r11,r12}\n"
-		: "+r" (r0), "+r" (r12)
-		:
-		: "r4", "r5", "r10", "lr", "cc");
-}
-EXPORT_SYMBOL(omap_smc1);
-
 static int __init omap_l2_cache_init(void)
 {
+	extern void omap_smc1(u32 fn, u32 arg);
 	void __iomem *l2cache_base;
 
 	/* To avoid code running on other OMAPs in
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 70c1861..6ae8805 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -273,7 +273,7 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index afa77ca..2de4f79 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -612,7 +612,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 3710190..5bfc13b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -636,7 +636,7 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 9958987..3c7789d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
@@ -39,8 +38,8 @@
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
 #define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_RED 	26
-#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED0_GREEN 	26
+#define IGEP2_GPIO_LED0_RED 	27
 #define IGEP2_GPIO_LED1_RED   	28
 #define IGEP2_GPIO_DVI_PUP	170
 #define IGEP2_GPIO_WIFI_NPD 	94
@@ -355,34 +354,50 @@ static void __init igep2_display_init(void)
 	    gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
 		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
 }
-#ifdef CONFIG_LEDS_TRIGGERS
-static struct gpio_led gpio_leds[] = {
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
 	{
-		.name = "GPIO_LED1_RED",
+		.name = "led0:red",
+		.gpio = IGEP2_GPIO_LED0_RED,
+	},
+	{
+		.name = "led0:green",
 		.default_trigger = "heartbeat",
+		.gpio = IGEP2_GPIO_LED0_GREEN,
+	},
+	{
+		.name = "led1:red",
 		.gpio = IGEP2_GPIO_LED1_RED,
 	},
 };
 
-static struct gpio_led_platform_data gpio_leds_info = {
-	.leds           = gpio_leds,
-	.num_leds       = ARRAY_SIZE(gpio_leds),
+static struct gpio_led_platform_data igep2_led_pdata = {
+	.leds           = igep2_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
 };
 
-static struct platform_device leds_gpio = {
+static struct platform_device igep2_led_device = {
 	 .name   = "leds-gpio",
 	 .id     = -1,
 	 .dev    = {
-		 .platform_data  =  &gpio_leds_info,
+		 .platform_data  =  &igep2_led_pdata,
 	},
 };
+
+static void __init igep2_init_led(void)
+{
+	platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_init_led(void) {}
 #endif
 
 static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_dss_device,
-#ifdef CONFIG_LEDS_TRIGGERS
-	&leds_gpio,
-#endif
 };
 
 static void __init igep2_init_irq(void)
@@ -442,7 +457,7 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
@@ -471,31 +486,34 @@ static void __init igep2_init(void)
 	usb_ehci_init(&ehci_pdata);
 
 	igep2_flash_init();
+	igep2_init_led();
 	igep2_display_init();
 	igep2_init_smsc911x();
 
 	/* GPIO userspace leds */
-	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
-	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-#ifndef CONFIG_LEDS_TRIGGERS
-	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
 #endif
+
 	/* GPIO W-LAN + Bluetooth combo module */
 	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 4cab052..da9bcb8 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -37,6 +37,103 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
+#define TUSB6010_ASYNC_CS	1
+#define TUSB6010_SYNC_CS	4
+#define TUSB6010_GPIO_INT	58
+#define TUSB6010_GPIO_ENABLE	0
+#define TUSB6010_DMACHAN	0x3f
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_USB_TUSB6010_MODULE)
+/*
+ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+ * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+ * provide then PGOOD signal to TUSB6010 which will release it from reset.
+ */
+static int tusb_set_power(int state)
+{
+	int i, retval = 0;
+
+	if (state) {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+		msleep(1);
+
+		/* Wait until TUSB6010 pulls INT pin down */
+		i = 100;
+		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+			msleep(1);
+			i--;
+		}
+
+		if (!i) {
+			printk(KERN_ERR "tusb: powerup failed\n");
+			retval = -ENODEV;
+		}
+	} else {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+		msleep(10);
+	}
+
+	return retval;
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 1,
+	.num_eps	= 16,
+	.ram_bits	= 12,
+};
+
+static struct musb_hdrc_platform_data tusb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode		= MUSB_PERIPHERAL,
+#else /* defined(CONFIG_USB_MUSB_HOST) */
+	.mode		= MUSB_HOST,
+#endif
+	.set_power	= tusb_set_power,
+	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
+	.power		= 100,	/* Max 100 mA VBUS for host mode */
+	.config		= &musb_config,
+};
+
+static void __init n8x0_usb_init(void)
+{
+	int ret = 0;
+	static char	announce[] __initdata = KERN_INFO "TUSB 6010\n";
+
+	/* PM companion chip power control pin */
+	ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
+	if (ret != 0) {
+		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
+		       TUSB6010_GPIO_ENABLE);
+		return;
+	}
+	gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
+
+	tusb_set_power(0);
+
+	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
+					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+	if (ret != 0)
+		goto err;
+
+	printk(announce);
+
+	return;
+
+err:
+	gpio_free(TUSB6010_GPIO_ENABLE);
+}
+#else
+
+static void __init n8x0_usb_init(void) {}
+
+#endif /*CONFIG_USB_TUSB6010 */
+
+
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel = 1,
@@ -562,6 +659,7 @@ static void __init n8x0_init_machine(void)
 	n8x0_menelaus_init();
 	n8x0_onenand_init();
 	n8x0_mmc_init();
+	n8x0_usb_init();
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6eb77e1..962d377 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -410,7 +410,7 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d6bc88c..017bb2f 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -635,7 +635,7 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 4827f46..395d049 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -459,12 +459,20 @@ static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("bq27500", 0x55),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
 static int __init omap3pandora_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
 			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
 	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, NULL, 0);
+	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
+			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
 	return 0;
 }
 
@@ -537,7 +545,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 3943d0f..2504d41 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -493,7 +493,7 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -518,14 +518,14 @@ static void omap3_touchbook_poweroff(void)
 	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
 }
 
-static void __init early_touchbook_revision(char **p)
+static int __init early_touchbook_revision(char *p)
 {
-	if (!*p)
-		return;
+	if (!p)
+		return 0;
 
-	strict_strtoul(*p, 10, &touchbook_revision);
+	return strict_strtoul(p, 10, &touchbook_revision);
 }
-__early_param("tbr=", early_touchbook_revision);
+early_param("tbr", early_touchbook_revision);
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 50872a4..8848c7c 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -394,7 +394,7 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index d3e3cd5..cd3e40c 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -52,7 +52,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index f12af95..d932b14 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1841,6 +1841,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
+	CLK("musb_hdrc",	"fck",	&osc_ck,	CK_242X),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 402e8f0..87f676a 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -237,7 +237,7 @@ static void __init _omap2_map_common_io(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP2420
-void __init omap242x_map_common_io()
+void __init omap242x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
@@ -246,7 +246,7 @@ void __init omap242x_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-void __init omap243x_map_common_io()
+void __init omap243x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
@@ -255,7 +255,7 @@ void __init omap243x_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io()
+void __init omap34xx_map_common_io(void)
 {
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 	_omap2_map_common_io();
@@ -263,7 +263,7 @@ void __init omap34xx_map_common_io()
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io()
+void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
 	_omap2_map_common_io();
@@ -309,7 +309,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 {
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_autodeps);
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	if (cpu_is_omap242x())
 		omap2420_hwmod_init();
 	else if (cpu_is_omap243x())
@@ -319,7 +318,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	omap2_mux_init();
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
-#endif
 
 	if (cpu_is_omap2420())
 		omap2420_clk_init();
@@ -333,11 +331,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		pr_err("Could not init clock framework - unknown CPU\n");
 
 	omap_serial_early_init();
-#ifndef CONFIG_ARCH_OMAP4
-	omap_hwmod_late_init();
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
+		omap_hwmod_late_init();
 	omap_pm_if_init();
-	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
-	_omap2_init_reprogram_sdrc();
-#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
+		_omap2_init_reprogram_sdrc();
+	}
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 52a981c..318f363 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -430,19 +430,19 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		if (unlikely(!res)) {
 			dev_err(&pdev->dev, "invalid irq resource\n");
 			ret = -ENODEV;
-			goto err_iva1;
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
 		}
 		mbox_iva_info.irq = res->start;
 		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret)
-			goto err_iva1;
+		if (ret) {
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
+		}
 	}
 #endif
 	return 0;
 
-err_iva1:
-	omap_mbox_unregister(&mbox_dsp_info);
-
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
new file mode 100644
index 0000000..89bb2b1
--- /dev/null
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -0,0 +1,32 @@
+/*
+ * OMAP44xx secure APIs file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number. It uses few CPU registers
+ * internally and hence they need be backed up including
+ * link register "lr".
+ * Function signature : void omap_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(omap_smc1)
+	stmfd   sp!, {r2-r12, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_smc1)
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 81872aa..9537f6f 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -133,7 +133,7 @@ u32 omap_prcm_get_reset_sources(void)
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_arch_reset(char mode)
+void omap_prcm_arch_reset(char mode, const char *cmd)
 {
 	s16 prcm_offs = 0;
 
@@ -145,7 +145,7 @@ void omap_prcm_arch_reset(char mode)
 		u32 l;
 
 		prcm_offs = OMAP3430_GR_MOD;
-		l = ('B' << 24) | ('M' << 16) | mode;
+		l = ('B' << 24) | ('M' << 16) | (cmd ? (u8)*cmd : 0);
 		/* Reserve the first word in scratchpad for communicating
 		 * with the boot ROM. A pointer to a data structure
 		 * describing the boot process can be stored there,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b79bc89..da77930 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -644,16 +644,21 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 }
 void __init omap_serial_early_init(void)
 {
-	int i;
+	int i, nr_ports;
 	char name[16];
 
+	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+		nr_ports = 3;
+	else
+		nr_ports = ARRAY_SIZE(omap_uart);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
 
-	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+	for (i = 0; i < nr_ports; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
@@ -669,17 +674,17 @@ void __init omap_serial_early_init(void)
 			continue;
 		}
 
-		sprintf(name, "uart%d_ick", i+1);
+		sprintf(name, "uart%d_ick", i + 1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
-			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
 			uart->ick = NULL;
 		}
 
 		sprintf(name, "uart%d_fck", i+1);
 		uart->fck = clk_get(NULL, name);
 		if (IS_ERR(uart->fck)) {
-			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
 			uart->fck = NULL;
 		}
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index f1df873..ee9f548 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -70,7 +70,7 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case EHCI_HCD_OMAP_MODE_PHY:
@@ -213,7 +213,7 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -229,7 +229,7 @@ void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 {
 }
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 337199e..76a347b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -2140,18 +2140,18 @@ void omap2_gpio_resume_after_retention(void)
 		if (gen) {
 			u32 old0, old1;
 
-			if (cpu_is_omap24xx() || cpu_is_omap44xx()) {
+			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 				old0 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
 				old1 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | gen, bank->base +
+				__raw_writel(old0 | gen, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | gen, bank->base +
+				__raw_writel(old1 | gen, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0, bank->base +
+				__raw_writel(old0, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1, bank->base +
+				__raw_writel(old1, bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
 			}
 
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f1..56e7f2e 100644
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
@@ -6,7 +6,7 @@ struct blizzard_platform_data {
 	void		(*power_down)(struct device *dev);
 	unsigned long	(*get_clock_rate)(struct device *dev);
 
-	unsigned	te_connected : 1;
+	unsigned	te_connected:1;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index ed8786c..7514174 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -167,10 +167,14 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
 #  define cpu_is_omap24xx()		is_omap24xx()
+# endif
+# if defined (CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		is_omap242x()
+# endif
+# if defined (CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
 # if defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index d6a0e27..9fbd914 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -24,7 +24,7 @@
 #define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode);
+void omap_prcm_arch_reset(char mode, const char *cmd);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			 const char *name);
 
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c58a4ef..d0a119f 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -22,7 +22,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void omap1_arch_reset(char mode)
+static inline void omap1_arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -43,9 +43,9 @@ static inline void omap1_arch_reset(char mode)
 static inline void arch_reset(char mode, const char *cmd)
 {
 	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode);
+		omap1_arch_reset(mode, cmd);
 	else
-		omap_prcm_arch_reset(mode);
+		omap_prcm_arch_reset(mode, cmd);
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 288e29e..568578d 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -53,7 +53,7 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
 #endif
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e47686e..52dfcc8 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -133,8 +133,7 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
 			irqst_spcr2);
 		/* Writing zero to XSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_tx, SPCR2,
-			    MCBSP_READ_CACHE(mcbsp_tx, SPCR2) & ~(XSYNC_ERR));
+		MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2));
 	} else {
 		complete(&mcbsp_tx->tx_irq_completion);
 	}
@@ -154,8 +153,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
 			irqst_spcr1);
 		/* Writing zero to RSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_rx, SPCR1,
-			    MCBSP_READ_CACHE(mcbsp_rx, SPCR1) & ~(RSYNC_ERR));
+		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
 		complete(&mcbsp_rx->tx_irq_completion);
 	}
@@ -934,8 +932,7 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 	/* if frame sync error - clear the error */
 	if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
 		/* clear error */
-		MCBSP_WRITE(mcbsp, SPCR2,
-				MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR));
+		MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
 		/* resend */
 		return -1;
 	} else {
@@ -975,8 +972,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 	/* if frame sync error - clear the error */
 	if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
 		/* clear error */
-		MCBSP_WRITE(mcbsp, SPCR1,
-				MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RSYNC_ERR));
+		MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
 		/* resend */
 		return -1;
 	} else {