IPMI: Style fixes in the system interface code

Lots of style fixes for the IPMI system interface driver.  No functional
changes.  Basically fixes everything reported by checkpatch and fixes the
comment style.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Rocky Craig <rocky.craig@hp.com>
Cc: Hannes Schulz <schulz@schwaar.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 264 insertions, 202 deletions

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index ba7e75b..97b6225 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -80,7 +80,7 @@
 #define SI_USEC_PER_JIFFY	(1000000/HZ)
 #define SI_TIMEOUT_JIFFIES	(SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
-                                       short timeout */
+				      short timeout */
 
 /* Bit for BMC global enables. */
 #define IPMI_BMC_RCV_MSG_INTR     0x01
@@ -114,8 +114,7 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
 
 #define DEVICE_NAME "ipmi_si"
 
-static struct device_driver ipmi_driver =
-{
+static struct device_driver ipmi_driver = {
 	.name = DEVICE_NAME,
 	.bus = &platform_bus_type
 };
@@ -169,8 +168,7 @@ enum si_stat_indexes {
 	SI_NUM_STATS
 };
 
-struct smi_info
-{
+struct smi_info {
 	int                    intf_num;
 	ipmi_smi_t             intf;
 	struct si_sm_data      *si_sm;
@@ -183,8 +181,10 @@ struct smi_info
 	struct ipmi_smi_msg    *curr_msg;
 	enum si_intf_state     si_state;
 
-	/* Used to handle the various types of I/O that can occur with
-           IPMI */
+	/*
+	 * Used to handle the various types of I/O that can occur with
+	 * IPMI
+	 */
 	struct si_sm_io io;
 	int (*io_setup)(struct smi_info *info);
 	void (*io_cleanup)(struct smi_info *info);
@@ -195,15 +195,18 @@ struct smi_info
 	void (*addr_source_cleanup)(struct smi_info *info);
 	void *addr_source_data;
 
-	/* Per-OEM handler, called from handle_flags().
-	   Returns 1 when handle_flags() needs to be re-run
-	   or 0 indicating it set si_state itself.
-	*/
+	/*
+	 * Per-OEM handler, called from handle_flags().  Returns 1
+	 * when handle_flags() needs to be re-run or 0 indicating it
+	 * set si_state itself.
+	 */
 	int (*oem_data_avail_handler)(struct smi_info *smi_info);
 
-	/* Flags from the last GET_MSG_FLAGS command, used when an ATTN
-	   is set to hold the flags until we are done handling everything
-	   from the flags. */
+	/*
+	 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
+	 * is set to hold the flags until we are done handling everything
+	 * from the flags.
+	 */
 #define RECEIVE_MSG_AVAIL	0x01
 #define EVENT_MSG_BUFFER_FULL	0x02
 #define WDT_PRE_TIMEOUT_INT	0x08
@@ -211,25 +214,31 @@ struct smi_info
 #define OEM1_DATA_AVAIL     0x40
 #define OEM2_DATA_AVAIL     0x80
 #define OEM_DATA_AVAIL      (OEM0_DATA_AVAIL | \
-                             OEM1_DATA_AVAIL | \
-                             OEM2_DATA_AVAIL)
+			     OEM1_DATA_AVAIL | \
+			     OEM2_DATA_AVAIL)
 	unsigned char       msg_flags;
 
-	/* If set to true, this will request events the next time the
-	   state machine is idle. */
+	/*
+	 * If set to true, this will request events the next time the
+	 * state machine is idle.
+	 */
 	atomic_t            req_events;
 
-	/* If true, run the state machine to completion on every send
-	   call.  Generally used after a panic to make sure stuff goes
-	   out. */
+	/*
+	 * If true, run the state machine to completion on every send
+	 * call.  Generally used after a panic to make sure stuff goes
+	 * out.
+	 */
 	int                 run_to_completion;
 
 	/* The I/O port of an SI interface. */
 	int                 port;
 
-	/* The space between start addresses of the two ports.  For
-	   instance, if the first port is 0xca2 and the spacing is 4, then
-	   the second port is 0xca6. */
+	/*
+	 * The space between start addresses of the two ports.  For
+	 * instance, if the first port is 0xca2 and the spacing is 4, then
+	 * the second port is 0xca6.
+	 */
 	unsigned int        spacing;
 
 	/* zero if no irq; */
@@ -244,10 +253,12 @@ struct smi_info
 	/* Used to gracefully stop the timer without race conditions. */
 	atomic_t            stop_operation;
 
-	/* The driver will disable interrupts when it gets into a
-	   situation where it cannot handle messages due to lack of
-	   memory.  Once that situation clears up, it will re-enable
-	   interrupts. */
+	/*
+	 * The driver will disable interrupts when it gets into a
+	 * situation where it cannot handle messages due to lack of
+	 * memory.  Once that situation clears up, it will re-enable
+	 * interrupts.
+	 */
 	int interrupt_disabled;
 
 	/* From the get device id response... */
@@ -257,8 +268,10 @@ struct smi_info
 	struct device *dev;
 	struct platform_device *pdev;
 
-	 /* True if we allocated the device, false if it came from
-	  * someplace else (like PCI). */
+	/*
+	 * True if we allocated the device, false if it came from
+	 * someplace else (like PCI).
+	 */
 	int dev_registered;
 
 	/* Slave address, could be reported from DMI. */
@@ -267,7 +280,7 @@ struct smi_info
 	/* Counters and things for the proc filesystem. */
 	atomic_t stats[SI_NUM_STATS];
 
-        struct task_struct *thread;
+	struct task_struct *thread;
 
 	struct list_head link;
 };
@@ -288,7 +301,7 @@ static int try_smi_init(struct smi_info *smi);
 static void cleanup_one_si(struct smi_info *to_clean);
 
 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
-static int register_xaction_notifier(struct notifier_block * nb)
+static int register_xaction_notifier(struct notifier_block *nb)
 {
 	return atomic_notifier_chain_register(&xaction_notifier_list, nb);
 }
@@ -297,7 +310,7 @@ static void deliver_recv_msg(struct smi_info *smi_info,
 			     struct ipmi_smi_msg *msg)
 {
 	/* Deliver the message to the upper layer with the lock
-           released. */
+	   released. */
 	spin_unlock(&(smi_info->si_lock));
 	ipmi_smi_msg_received(smi_info->intf, msg);
 	spin_lock(&(smi_info->si_lock));
@@ -329,8 +342,10 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 	struct timeval t;
 #endif
 
-	/* No need to save flags, we aleady have interrupts off and we
-	   already hold the SMI lock. */
+	/*
+	 * No need to save flags, we aleady have interrupts off and we
+	 * already hold the SMI lock.
+	 */
 	if (!smi_info->run_to_completion)
 		spin_lock(&(smi_info->msg_lock));
 
@@ -353,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 						link);
 #ifdef DEBUG_TIMING
 		do_gettimeofday(&t);
-		printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+		printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
 		err = atomic_notifier_call_chain(&xaction_notifier_list,
 				0, smi_info);
@@ -365,13 +380,12 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 			smi_info->si_sm,
 			smi_info->curr_msg->data,
 			smi_info->curr_msg->data_size);
-		if (err) {
+		if (err)
 			return_hosed_msg(smi_info, err);
-		}
 
 		rv = SI_SM_CALL_WITHOUT_DELAY;
 	}
-	out:
+ out:
 	if (!smi_info->run_to_completion)
 		spin_unlock(&(smi_info->msg_lock));
 
@@ -382,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info)
 {
 	unsigned char msg[2];
 
-	/* If we are enabling interrupts, we have to tell the
-	   BMC to use them. */
+	/*
+	 * If we are enabling interrupts, we have to tell the
+	 * BMC to use them.
+	 */
 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 
@@ -415,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info)
 	smi_info->si_state = SI_CLEARING_FLAGS;
 }
 
-/* When we have a situtaion where we run out of memory and cannot
-   allocate messages, we just leave them in the BMC and run the system
-   polled until we can allocate some memory.  Once we have some
-   memory, we will re-enable the interrupt. */
+/*
+ * When we have a situtaion where we run out of memory and cannot
+ * allocate messages, we just leave them in the BMC and run the system
+ * polled until we can allocate some memory.  Once we have some
+ * memory, we will re-enable the interrupt.
+ */
 static inline void disable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
@@ -486,12 +504,11 @@ static void handle_flags(struct smi_info *smi_info)
 			smi_info->curr_msg->data_size);
 		smi_info->si_state = SI_GETTING_EVENTS;
 	} else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
-	           smi_info->oem_data_avail_handler) {
+		   smi_info->oem_data_avail_handler) {
 		if (smi_info->oem_data_avail_handler(smi_info))
 			goto retry;
-	} else {
+	} else
 		smi_info->si_state = SI_NORMAL;
-	}
 }
 
 static void handle_transaction_done(struct smi_info *smi_info)
@@ -501,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 	struct timeval t;
 
 	do_gettimeofday(&t);
-	printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+	printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
 	switch (smi_info->si_state) {
 	case SI_NORMAL:
@@ -514,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
 				smi_info->curr_msg->rsp,
 				IPMI_MAX_MSG_LENGTH);
 
-		/* Do this here becase deliver_recv_msg() releases the
-		   lock, and a new message can be put in during the
-		   time the lock is released. */
+		/*
+		 * Do this here becase deliver_recv_msg() releases the
+		 * lock, and a new message can be put in during the
+		 * time the lock is released.
+		 */
 		msg = smi_info->curr_msg;
 		smi_info->curr_msg = NULL;
 		deliver_recv_msg(smi_info, msg);
@@ -530,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		/* We got the flags from the SMI, now handle them. */
 		len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 		if (msg[2] != 0) {
-			/* Error fetching flags, just give up for
-			   now. */
+			/* Error fetching flags, just give up for now. */
 			smi_info->si_state = SI_NORMAL;
 		} else if (len < 4) {
-			/* Hmm, no flags.  That's technically illegal, but
-			   don't use uninitialized data. */
+			/*
+			 * Hmm, no flags.  That's technically illegal, but
+			 * don't use uninitialized data.
+			 */
 			smi_info->si_state = SI_NORMAL;
 		} else {
 			smi_info->msg_flags = msg[3];
@@ -572,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
 				smi_info->curr_msg->rsp,
 				IPMI_MAX_MSG_LENGTH);
 
-		/* Do this here becase deliver_recv_msg() releases the
-		   lock, and a new message can be put in during the
-		   time the lock is released. */
+		/*
+		 * Do this here becase deliver_recv_msg() releases the
+		 * lock, and a new message can be put in during the
+		 * time the lock is released.
+		 */
 		msg = smi_info->curr_msg;
 		smi_info->curr_msg = NULL;
 		if (msg->rsp[2] != 0) {
@@ -587,10 +609,12 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		} else {
 			smi_inc_stat(smi_info, events);
 
-			/* Do this before we deliver the message
-			   because delivering the message releases the
-			   lock and something else can mess with the
-			   state. */
+			/*
+			 * Do this before we deliver the message
+			 * because delivering the message releases the
+			 * lock and something else can mess with the
+			 * state.
+			 */
 			handle_flags(smi_info);
 
 			deliver_recv_msg(smi_info, msg);
@@ -606,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info)
 				smi_info->curr_msg->rsp,
 				IPMI_MAX_MSG_LENGTH);
 
-		/* Do this here becase deliver_recv_msg() releases the
-		   lock, and a new message can be put in during the
-		   time the lock is released. */
+		/*
+		 * Do this here becase deliver_recv_msg() releases the
+		 * lock, and a new message can be put in during the
+		 * time the lock is released.
+		 */
 		msg = smi_info->curr_msg;
 		smi_info->curr_msg = NULL;
 		if (msg->rsp[2] != 0) {
@@ -621,10 +647,12 @@ static void handle_transaction_done(struct smi_info *smi_info)
 		} else {
 			smi_inc_stat(smi_info, incoming_messages);
 
-			/* Do this before we deliver the message
-			   because delivering the message releases the
-			   lock and something else can mess with the
-			   state. */
+			/*
+			 * Do this before we deliver the message
+			 * because delivering the message releases the
+			 * lock and something else can mess with the
+			 * state.
+			 */
 			handle_flags(smi_info);
 
 			deliver_recv_msg(smi_info, msg);
@@ -712,46 +740,49 @@ static void handle_transaction_done(struct smi_info *smi_info)
 	}
 }
 
-/* Called on timeouts and events.  Timeouts should pass the elapsed
-   time, interrupts should pass in zero.  Must be called with
-   si_lock held and interrupts disabled. */
+/*
+ * Called on timeouts and events.  Timeouts should pass the elapsed
+ * time, interrupts should pass in zero.  Must be called with
+ * si_lock held and interrupts disabled.
+ */
 static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 					   int time)
 {
 	enum si_sm_result si_sm_result;
 
  restart:
-	/* There used to be a loop here that waited a little while
-	   (around 25us) before giving up.  That turned out to be
-	   pointless, the minimum delays I was seeing were in the 300us
-	   range, which is far too long to wait in an interrupt.  So
-	   we just run until the state machine tells us something
-	   happened or it needs a delay. */
+	/*
+	 * There used to be a loop here that waited a little while
+	 * (around 25us) before giving up.  That turned out to be
+	 * pointless, the minimum delays I was seeing were in the 300us
+	 * range, which is far too long to wait in an interrupt.  So
+	 * we just run until the state machine tells us something
+	 * happened or it needs a delay.
+	 */
 	si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
 	time = 0;
 	while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
-	{
 		si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
-	}
 
-	if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
-	{
+	if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
 		smi_inc_stat(smi_info, complete_transactions);
 
 		handle_transaction_done(smi_info);
 		si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
-	}
-	else if (si_sm_result == SI_SM_HOSED)
-	{
+	} else if (si_sm_result == SI_SM_HOSED) {
 		smi_inc_stat(smi_info, hosed_count);
 
-		/* Do the before return_hosed_msg, because that
-		   releases the lock. */
+		/*
+		 * Do the before return_hosed_msg, because that
+		 * releases the lock.
+		 */
 		smi_info->si_state = SI_NORMAL;
 		if (smi_info->curr_msg != NULL) {
-			/* If we were handling a user message, format
-                           a response to send to the upper layer to
-                           tell it about the error. */
+			/*
+			 * If we were handling a user message, format
+			 * a response to send to the upper layer to
+			 * tell it about the error.
+			 */
 			return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
 		}
 		si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
@@ -761,17 +792,18 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 	 * We prefer handling attn over new messages.  But don't do
 	 * this if there is not yet an upper layer to handle anything.
 	 */
-	if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN)
-	{
+	if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
 		unsigned char msg[2];
 
 		smi_inc_stat(smi_info, attentions);
 
-		/* Got a attn, send down a get message flags to see
-                   what's causing it.  It would be better to handle
-                   this in the upper layer, but due to the way
-                   interrupts work with the SMI, that's not really
-                   possible. */
+		/*
+		 * Got a attn, send down a get message flags to see
+		 * what's causing it.  It would be better to handle
+		 * this in the upper layer, but due to the way
+		 * interrupts work with the SMI, that's not really
+		 * possible.
+		 */
 		msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 		msg[1] = IPMI_GET_MSG_FLAGS_CMD;
 
@@ -788,13 +820,14 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 		si_sm_result = start_next_msg(smi_info);
 		if (si_sm_result != SI_SM_IDLE)
 			goto restart;
-        }
+	}
 
 	if ((si_sm_result == SI_SM_IDLE)
-	    && (atomic_read(&smi_info->req_events)))
-	{
-		/* We are idle and the upper layer requested that I fetch
-		   events, so do so. */
+	    && (atomic_read(&smi_info->req_events))) {
+		/*
+		 * We are idle and the upper layer requested that I fetch
+		 * events, so do so.
+		 */
 		atomic_set(&smi_info->req_events, 0);
 
 		smi_info->curr_msg = ipmi_alloc_smi_msg();
@@ -871,11 +904,8 @@ static void sender(void                *send_info,
 	spin_unlock_irqrestore(&smi_info->msg_lock, flags);
 
 	spin_lock_irqsave(&smi_info->si_lock, flags);
-	if ((smi_info->si_state == SI_NORMAL)
-	    && (smi_info->curr_msg == NULL))
-	{
+	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
 		start_next_msg(smi_info);
-	}
 	spin_unlock_irqrestore(&smi_info->si_lock, flags);
 }
 
@@ -906,9 +936,8 @@ static int ipmi_thread(void *data)
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
-		if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
-			/* do nothing */
-		}
+		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY)
 			schedule();
 		else
@@ -959,7 +988,7 @@ static void smi_timeout(unsigned long data)
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 #ifdef DEBUG_TIMING
 	do_gettimeofday(&t);
-	printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+	printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
 	jiffies_now = jiffies;
 	time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
@@ -977,8 +1006,10 @@ static void smi_timeout(unsigned long data)
 		goto do_add_timer;
 	}
 
-	/* If the state machine asks for a short delay, then shorten
-           the timer timeout. */
+	/*
+	 * If the state machine asks for a short delay, then shorten
+	 * the timer timeout.
+	 */
 	if (smi_result == SI_SM_CALL_WITH_DELAY) {
 		smi_inc_stat(smi_info, short_timeouts);
 		smi_info->si_timer.expires = jiffies + 1;
@@ -1005,7 +1036,7 @@ static irqreturn_t si_irq_handler(int irq, void *data)
 
 #ifdef DEBUG_TIMING
 	do_gettimeofday(&t);
-	printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+	printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
@@ -1048,7 +1079,7 @@ static int smi_start_processing(void       *send_info,
 	 * The BT interface is efficient enough to not need a thread,
 	 * and there is no need for a thread if we have interrupts.
 	 */
- 	else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
+	else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
 		enable = 1;
 
 	if (enable) {
@@ -1074,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable)
 		atomic_set(&smi_info->req_events, 0);
 }
 
-static struct ipmi_smi_handlers handlers =
-{
+static struct ipmi_smi_handlers handlers = {
 	.owner                  = THIS_MODULE,
 	.start_processing       = smi_start_processing,
 	.sender			= sender,
@@ -1085,8 +1115,10 @@ static struct ipmi_smi_handlers handlers =
 	.poll			= poll,
 };
 
-/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
-   a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS */
+/*
+ * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
+ * a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS.
+ */
 
 static LIST_HEAD(smi_infos);
 static DEFINE_MUTEX(smi_infos_lock);
@@ -1277,10 +1309,9 @@ static void port_cleanup(struct smi_info *info)
 	int          idx;
 
 	if (addr) {
-	  	for (idx = 0; idx < info->io_size; idx++) {
+		for (idx = 0; idx < info->io_size; idx++)
 			release_region(addr + idx * info->io.regspacing,
 				       info->io.regsize);
-		}
 	}
 }
 
@@ -1294,8 +1325,10 @@ static int port_setup(struct smi_info *info)
 
 	info->io_cleanup = port_cleanup;
 
-	/* Figure out the actual inb/inw/inl/etc routine to use based
-	   upon the register size. */
+	/*
+	 * Figure out the actual inb/inw/inl/etc routine to use based
+	 * upon the register size.
+	 */
 	switch (info->io.regsize) {
 	case 1:
 		info->io.inputb = port_inb;
@@ -1310,17 +1343,18 @@ static int port_setup(struct smi_info *info)
 		info->io.outputb = port_outl;
 		break;
 	default:
-		printk("ipmi_si: Invalid register size: %d\n",
+		printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
 		       info->io.regsize);
 		return -EINVAL;
 	}
 
-	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	/*
+	 * Some BIOSes reserve disjoint I/O regions in their ACPI
 	 * tables.  This causes problems when trying to register the
 	 * entire I/O region.  Therefore we must register each I/O
 	 * port separately.
 	 */
-  	for (idx = 0; idx < info->io_size; idx++) {
+	for (idx = 0; idx < info->io_size; idx++) {
 		if (request_region(addr + idx * info->io.regspacing,
 				   info->io.regsize, DEVICE_NAME) == NULL) {
 			/* Undo allocations */
@@ -1408,8 +1442,10 @@ static int mem_setup(struct smi_info *info)
 
 	info->io_cleanup = mem_cleanup;
 
-	/* Figure out the actual readb/readw/readl/etc routine to use based
-	   upon the register size. */
+	/*
+	 * Figure out the actual readb/readw/readl/etc routine to use based
+	 * upon the register size.
+	 */
 	switch (info->io.regsize) {
 	case 1:
 		info->io.inputb = intf_mem_inb;
@@ -1430,16 +1466,18 @@ static int mem_setup(struct smi_info *info)
 		break;
 #endif
 	default:
-		printk("ipmi_si: Invalid register size: %d\n",
+		printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
 		       info->io.regsize);
 		return -EINVAL;
 	}
 
-	/* Calculate the total amount of memory to claim.  This is an
+	/*
+	 * Calculate the total amount of memory to claim.  This is an
 	 * unusual looking calculation, but it avoids claiming any
 	 * more memory than it has to.  It will claim everything
 	 * between the first address to the end of the last full
-	 * register. */
+	 * register.
+	 */
 	mapsize = ((info->io_size * info->io.regspacing)
 		   - (info->io.regspacing - info->io.regsize));
 
@@ -1769,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void)
 
 #include <linux/acpi.h>
 
-/* Once we get an ACPI failure, we don't try any more, because we go
-   through the tables sequentially.  Once we don't find a table, there
-   are no more. */
+/*
+ * Once we get an ACPI failure, we don't try any more, because we go
+ * through the tables sequentially.  Once we don't find a table, there
+ * are no more.
+ */
 static int acpi_failure;
 
 /* For GPE-type interrupts. */
@@ -1834,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
 
 /*
  * Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
+ * Docs/TechPapers/IA64/hpspmi.pdf
  */
 struct SPMITable {
 	s8	Signature[4];
@@ -1856,14 +1897,18 @@ struct SPMITable {
 	 */
 	u8	InterruptType;
 
-	/* If bit 0 of InterruptType is set, then this is the SCI
-           interrupt in the GPEx_STS register. */
+	/*
+	 * If bit 0 of InterruptType is set, then this is the SCI
+	 * interrupt in the GPEx_STS register.
+	 */
 	u8	GPE;
 
 	s16	Reserved;
 
-	/* If bit 1 of InterruptType is set, then this is the I/O
-           APIC/SAPIC interrupt. */
+	/*
+	 * If bit 1 of InterruptType is set, then this is the I/O
+	 * APIC/SAPIC interrupt.
+	 */
 	u32	GlobalSystemInterrupt;
 
 	/* The actual register address. */
@@ -1881,7 +1926,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
 
 	if (spmi->IPMIlegacy != 1) {
 	    printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
-  	    return -ENODEV;
+	    return -ENODEV;
 	}
 
 	if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
@@ -1898,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
 	info->addr_source = "ACPI";
 
 	/* Figure out the interface type. */
-	switch (spmi->InterfaceType)
-	{
+	switch (spmi->InterfaceType) {
 	case 1:	/* KCS */
 		info->si_type = SI_KCS;
 		break;
@@ -1947,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi)
 		info->io.addr_type = IPMI_IO_ADDR_SPACE;
 	} else {
 		kfree(info);
-		printk("ipmi_si: Unknown ACPI I/O Address type\n");
+		printk(KERN_WARNING
+		       "ipmi_si: Unknown ACPI I/O Address type\n");
 		return -EIO;
 	}
 	info->io.addr_data = spmi->addr.address;
@@ -1981,8 +2026,7 @@ static __devinit void acpi_find_bmc(void)
 #endif
 
 #ifdef CONFIG_DMI
-struct dmi_ipmi_data
-{
+struct dmi_ipmi_data {
 	u8   		type;
 	u8   		addr_space;
 	unsigned long	base_addr;
@@ -2007,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
 			/* I/O */
 			base_addr &= 0xFFFE;
 			dmi->addr_space = IPMI_IO_ADDR_SPACE;
-		}
-		else {
+		} else
 			/* Memory */
 			dmi->addr_space = IPMI_MEM_ADDR_SPACE;
-		}
+
 		/* If bit 4 of byte 0x10 is set, then the lsb for the address
 		   is odd. */
 		dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
@@ -2020,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
 
 		/* The top two bits of byte 0x10 hold the register spacing. */
 		reg_spacing = (data[0x10] & 0xC0) >> 6;
-		switch(reg_spacing){
+		switch (reg_spacing) {
 		case 0x00: /* Byte boundaries */
 		    dmi->offset = 1;
 		    break;
@@ -2036,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm,
 		}
 	} else {
 		/* Old DMI spec. */
-		/* Note that technically, the lower bit of the base
+		/*
+		 * Note that technically, the lower bit of the base
 		 * address should be 1 if the address is I/O and 0 if
 		 * the address is in memory.  So many systems get that
 		 * wrong (and all that I have seen are I/O) so we just
 		 * ignore that bit and assume I/O.  Systems that use
-		 * memory should use the newer spec, anyway. */
+		 * memory should use the newer spec, anyway.
+		 */
 		dmi->base_addr = base_addr & 0xfffe;
 		dmi->addr_space = IPMI_IO_ADDR_SPACE;
 		dmi->offset = 1;
@@ -2248,13 +2293,13 @@ static struct pci_device_id ipmi_pci_devices[] = {
 MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
 
 static struct pci_driver ipmi_pci_driver = {
-        .name =         DEVICE_NAME,
-        .id_table =     ipmi_pci_devices,
-        .probe =        ipmi_pci_probe,
-        .remove =       __devexit_p(ipmi_pci_remove),
+	.name =         DEVICE_NAME,
+	.id_table =     ipmi_pci_devices,
+	.probe =        ipmi_pci_probe,
+	.remove =       __devexit_p(ipmi_pci_remove),
 #ifdef CONFIG_PM
-        .suspend =      ipmi_pci_suspend,
-        .resume =       ipmi_pci_resume,
+	.suspend =      ipmi_pci_suspend,
+	.resume =       ipmi_pci_resume,
 #endif
 };
 #endif /* CONFIG_PCI */
@@ -2324,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
 		info->io.addr_data, info->io.regsize, info->io.regspacing,
 		info->irq);
 
-	dev->dev.driver_data = (void*) info;
+	dev->dev.driver_data = (void *) info;
 
 	return try_smi_init(info);
 }
@@ -2337,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev)
 
 static struct of_device_id ipmi_match[] =
 {
-	{ .type = "ipmi", .compatible = "ipmi-kcs",  .data = (void *)(unsigned long) SI_KCS },
-	{ .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC },
-	{ .type = "ipmi", .compatible = "ipmi-bt",   .data = (void *)(unsigned long) SI_BT },
+	{ .type = "ipmi", .compatible = "ipmi-kcs",
+	  .data = (void *)(unsigned long) SI_KCS },
+	{ .type = "ipmi", .compatible = "ipmi-smic",
+	  .data = (void *)(unsigned long) SI_SMIC },
+	{ .type = "ipmi", .compatible = "ipmi-bt",
+	  .data = (void *)(unsigned long) SI_BT },
 	{},
 };
 
-static struct of_platform_driver ipmi_of_platform_driver =
-{
+static struct of_platform_driver ipmi_of_platform_driver = {
 	.name		= "ipmi",
 	.match_table	= ipmi_match,
 	.probe		= ipmi_of_probe,
@@ -2365,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info)
 	if (!resp)
 		return -ENOMEM;
 
-	/* Do a Get Device ID command, since it comes back with some
-	   useful info. */
+	/*
+	 * Do a Get Device ID command, since it comes back with some
+	 * useful info.
+	 */
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_GET_DEVICE_ID_CMD;
 	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 
 	smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
-	for (;;)
-	{
+	for (;;) {
 		if (smi_result == SI_SM_CALL_WITH_DELAY ||
 		    smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
 			schedule_timeout_uninterruptible(1);
 			smi_result = smi_info->handlers->event(
 				smi_info->si_sm, 100);
-		}
-		else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
-		{
+		} else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
 			smi_result = smi_info->handlers->event(
 				smi_info->si_sm, 0);
-		}
-		else
+		} else
 			break;
 	}
 	if (smi_result == SI_SM_HOSED) {
-		/* We couldn't get the state machine to run, so whatever's at
-		   the port is probably not an IPMI SMI interface. */
+		/*
+		 * We couldn't get the state machine to run, so whatever's at
+		 * the port is probably not an IPMI SMI interface.
+		 */
 		rv = -ENODEV;
 		goto out;
 	}
@@ -2476,7 +2523,7 @@ static int param_read_proc(char *page, char **start, off_t off,
 static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
 {
 	smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
-			      	RECEIVE_MSG_AVAIL);
+			       RECEIVE_MSG_AVAIL);
 	return 1;
 }
 
@@ -2518,10 +2565,9 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
 		    id->ipmi_version   == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
 			smi_info->oem_data_avail_handler =
 				oem_data_avail_to_receive_msg_avail;
-		}
-		else if (ipmi_version_major(id) < 1 ||
-			 (ipmi_version_major(id) == 1 &&
-			  ipmi_version_minor(id) < 5)) {
+		} else if (ipmi_version_major(id) < 1 ||
+			   (ipmi_version_major(id) == 1 &&
+			    ipmi_version_minor(id) < 5)) {
 			smi_info->oem_data_avail_handler =
 				oem_data_avail_to_receive_msg_avail;
 		}
@@ -2613,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 {
 	if (smi_info->intf) {
-		/* The timer and thread are only running if the
-		   interface has been started up and registered. */
+		/*
+		 * The timer and thread are only running if the
+		 * interface has been started up and registered.
+		 */
 		if (smi_info->thread != NULL)
 			kthread_stop(smi_info->thread);
 		del_timer_sync(&smi_info->si_timer);
@@ -2739,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	/* Allocate the state machine's data and initialize it. */
 	new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
 	if (!new_smi->si_sm) {
-		printk(" Could not allocate state machine memory\n");
+		printk(KERN_ERR "Could not allocate state machine memory\n");
 		rv = -ENOMEM;
 		goto out_err;
 	}
@@ -2749,7 +2797,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	/* Now that we know the I/O size, we can set up the I/O. */
 	rv = new_smi->io_setup(new_smi);
 	if (rv) {
-		printk(" Could not set up I/O space\n");
+		printk(KERN_ERR "Could not set up I/O space\n");
 		goto out_err;
 	}
 
@@ -2765,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi)
 		goto out_err;
 	}
 
-	/* Attempt a get device id command.  If it fails, we probably
-           don't have a BMC here. */
+	/*
+	 * Attempt a get device id command.  If it fails, we probably
+	 * don't have a BMC here.
+	 */
 	rv = try_get_dev_id(new_smi);
 	if (rv) {
 		if (new_smi->addr_source)
@@ -2791,16 +2841,20 @@ static int try_smi_init(struct smi_info *new_smi)
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
-	/* Start clearing the flags before we enable interrupts or the
-	   timer to avoid racing with the timer. */
+	/*
+	 * Start clearing the flags before we enable interrupts or the
+	 * timer to avoid racing with the timer.
+	 */
 	start_clear_flags(new_smi);
 	/* IRQ is defined to be set when non-zero. */
 	if (new_smi->irq)
 		new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
 
 	if (!new_smi->dev) {
-		/* If we don't already have a device from something
-		 * else (like PCI), then register a new one. */
+		/*
+		 * If we don't already have a device from something
+		 * else (like PCI), then register a new one.
+		 */
 		new_smi->pdev = platform_device_alloc("ipmi_si",
 						      new_smi->intf_num);
 		if (rv) {
@@ -2871,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi)
 
 	mutex_unlock(&smi_infos_lock);
 
-	printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
+	printk(KERN_INFO "IPMI %s interface initialized\n",
+	       si_to_str[new_smi->si_type]);
 
 	return 0;
 
@@ -2886,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi)
 	if (new_smi->irq_cleanup)
 		new_smi->irq_cleanup(new_smi);
 
-	/* Wait until we know that we are out of any interrupt
-	   handlers might have been running before we freed the
-	   interrupt. */
+	/*
+	 * Wait until we know that we are out of any interrupt
+	 * handlers might have been running before we freed the
+	 * interrupt.
+	 */
 	synchronize_sched();
 
 	if (new_smi->si_sm) {
@@ -2960,11 +3017,10 @@ static __devinit int init_ipmi_si(void)
 
 #ifdef CONFIG_PCI
 	rv = pci_register_driver(&ipmi_pci_driver);
-	if (rv){
+	if (rv)
 		printk(KERN_ERR
 		       "init_ipmi_si: Unable to register PCI driver: %d\n",
 		       rv);
-	}
 #endif
 
 #ifdef CONFIG_PPC_OF
@@ -2993,7 +3049,8 @@ static __devinit int init_ipmi_si(void)
 		of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
 		driver_unregister(&ipmi_driver);
-		printk("ipmi_si: Unable to find any System Interface(s)\n");
+		printk(KERN_WARNING
+		       "ipmi_si: Unable to find any System Interface(s)\n");
 		return -ENODEV;
 	} else {
 		mutex_unlock(&smi_infos_lock);
@@ -3015,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean)
 	/* Tell the driver that we are shutting down. */
 	atomic_inc(&to_clean->stop_operation);
 
-	/* Make sure the timer and thread are stopped and will not run
-	   again. */
+	/*
+	 * Make sure the timer and thread are stopped and will not run
+	 * again.
+	 */
 	wait_for_timer_and_thread(to_clean);
 
-	/* Timeouts are stopped, now make sure the interrupts are off
-	   for the device.  A little tricky with locks to make sure
-	   there are no races. */
+	/*
+	 * Timeouts are stopped, now make sure the interrupts are off
+	 * for the device.  A little tricky with locks to make sure
+	 * there are no races.
+	 */
 	spin_lock_irqsave(&to_clean->si_lock, flags);
 	while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
 		spin_unlock_irqrestore(&to_clean->si_lock, flags);
@@ -3092,4 +3153,5 @@ module_exit(cleanup_ipmi_si);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
-MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
+MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
+		   " system interfaces.");