Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits)
  i2c: Add detection capability to new-style drivers
  i2c: Call client_unregister for new-style devices too
  i2c: Clean up old chip drivers
  i2c-ibm_iic: Register child nodes
  i2c: New-style EEPROM driver using device IDs
  i2c: Export the i2c_bus_type symbol
  i2c-au1550: Fix PM support
  i2c-dev: Delete empty detach_client callback
  i2c: Drop stray references to lm_sensors
  i2c: Check for ACPI resource conflicts
  i2c-ocores: basic PM support
  i2c-sibyte: SWARM I2C board initialization
  i2c-i801: Fix handling of error conditions
  i2c-i801: Rename local variable temp to status
  i2c-i801: Properly report bus arbitration loss
  i2c-i801: Remove verbose debugging messages
  i2c-algo-pcf: Drop unused struct members
  i2c-algo-pcf: Multi-master lost-arbitration improvement
  i2c: Deprecate the legacy gpio drivers
  i2c-pxa: Initialize early
  ...

42 files changed, 2352 insertions, 1816 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 48438cc..6ee997b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -4,6 +4,9 @@
 
 menu "I2C Hardware Bus support"
 
+comment "PC SMBus host controller drivers"
+	depends on PCI
+
 config I2C_ALI1535
 	tristate "ALI 1535"
 	depends on PCI
@@ -73,6 +76,186 @@ config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_I801
+	tristate "Intel 82801 (ICH)"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  801 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported:
+	    82801AA
+	    82801AB
+	    82801BA
+	    82801CA/CAM
+	    82801DB
+	    82801EB/ER (ICH5/ICH5R)
+	    6300ESB
+	    ICH6
+	    ICH7
+	    ESB2
+	    ICH8
+	    ICH9
+	    Tolapai
+	    ICH10
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-i801.
+
+config I2C_ISCH
+	tristate "Intel SCH SMBus 1.0"
+	depends on PCI
+	help
+	  Say Y here if you want to use SMBus controller on the Intel SCH
+	  based systems.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-isch.
+
+config I2C_PIIX4
+	tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
+	  versions of the chipset are supported (note that Serverworks is part
+	  of Broadcom):
+	    Intel PIIX4
+	    Intel 440MX
+	    ATI IXP200
+	    ATI IXP300
+	    ATI IXP400
+	    ATI SB600
+	    ATI SB700
+	    ATI SB800
+	    Serverworks OSB4
+	    Serverworks CSB5
+	    Serverworks CSB6
+	    Serverworks HT-1000
+	    SMSC Victory66
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-piix4.
+
+config I2C_NFORCE2
+	tristate "Nvidia nForce2, nForce3 and nForce4"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the Nvidia
+	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-nforce2.
+
+config I2C_NFORCE2_S4985
+	tristate "SMBus multiplexing on the Tyan S4985"
+	depends on I2C_NFORCE2 && EXPERIMENTAL
+	help
+	  Enabling this option will add specific SMBus support for the Tyan
+	  S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
+	  over 4 different channels, where the various memory module EEPROMs
+	  live.  Saying yes here will give you access to these in addition
+	  to the trunk.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-nforce2-s4985.
+
+config I2C_SIS5595
+	tristate "SiS 5595"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  SiS5595 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis5595.
+
+config I2C_SIS630
+	tristate "SiS 630/730"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis630.
+
+config I2C_SIS96X
+	tristate "SiS 96x"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the SiS
+	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
+	  chipsets are supported:
+	    645/961
+	    645DX/961
+	    645DX/962
+	    648/961
+	    650/961
+	    735
+	    745
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sis96x.
+
+config I2C_VIA
+	tristate "VIA VT82C586B"
+	depends on PCI && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  If you say yes to this option, support will be included for the VIA
+          82C586B I2C interface
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-via.
+
+config I2C_VIAPRO
+	tristate "VIA VT82C596/82C686/82xx and CX700"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the VIA
+	  VT82C596 and later SMBus interface.  Specifically, the following
+	  chipsets are supported:
+	    VT82C596A/B
+	    VT82C686A/B
+	    VT8231
+	    VT8233/A
+	    VT8235
+	    VT8237R/A/S
+	    VT8251
+	    CX700
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-viapro.
+
+comment "Mac SMBus host controller drivers"
+	depends on PPC_CHRP || PPC_PMAC
+
+config I2C_HYDRA
+	tristate "CHRP Apple Hydra Mac I/O I2C interface"
+	depends on PCI && PPC_CHRP && EXPERIMENTAL
+	select I2C_ALGOBIT
+	help
+	  This supports the use of the I2C interface in the Apple Hydra Mac
+	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
+	  have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hydra.
+
+config I2C_POWERMAC
+	tristate "Powermac I2C interface"
+	depends on PPC_PMAC
+	default y
+	help
+	  This exposes the various PowerMac i2c interfaces to the linux i2c
+	  layer and to userland. It is used by various drivers on the PowerMac
+	  platform, and should generally be enabled.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-powermac.
+
+comment "I2C system bus drivers (mostly embedded / system-on-chip)"
+
 config I2C_AT91
 	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
 	depends on ARCH_AT91 && EXPERIMENTAL && BROKEN
@@ -101,10 +284,9 @@ config I2C_AU1550
 config I2C_BLACKFIN_TWI
 	tristate "Blackfin TWI I2C support"
 	depends on BLACKFIN
+	depends on !BF561 && !BF531 && !BF532 && !BF533
 	help
-	  This is the TWI I2C device driver for Blackfin BF522, BF525,
-	  BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors,
-	  please don't use this driver.
+	  This is the I2C bus driver for Blackfin on-chip TWI interface.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-bfin-twi.
@@ -117,6 +299,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
 	help
 	  The unit of the TWI clock is kHz.
 
+config I2C_CPM
+	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+	depends on (CPM1 || CPM2) && OF_I2C
+	help
+	  This supports the use of the I2C interface on Freescale
+	  processors with CPM1 or CPM2.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-cpm.
+
 config I2C_DAVINCI
 	tristate "DaVinci I2C driver"
 	depends on ARCH_DAVINCI
@@ -130,17 +322,6 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
-config I2C_ELEKTOR
-	tristate "Elektor ISA card"
-	depends on ISA && BROKEN_ON_SMP
-	select I2C_ALGOPCF
-	help
-	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
-	  such an adapter.
-
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-elektor.
-
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
 	depends on GENERIC_GPIO
@@ -149,104 +330,6 @@ config I2C_GPIO
 	  This is a very simple bitbanging I2C driver utilizing the
 	  arch-neutral GPIO API to control the SCL and SDA lines.
 
-config I2C_HYDRA
-	tristate "CHRP Apple Hydra Mac I/O I2C interface"
-	depends on PCI && PPC_CHRP && EXPERIMENTAL
-	select I2C_ALGOBIT
-	help
-	  This supports the use of the I2C interface in the Apple Hydra Mac
-	  I/O chip on some CHRP machines (e.g. the LongTrail).  Say Y if you
-	  have such a machine.
-
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-hydra.
-
-config I2C_I801
-	tristate "Intel 82801 (ICH)"
-	depends on PCI
-	help
-	  If you say yes to this option, support will be included for the Intel
-	  801 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset are supported:
-	    82801AA
-	    82801AB
-	    82801BA
-	    82801CA/CAM
-	    82801DB
-	    82801EB/ER (ICH5/ICH5R)
-	    6300ESB
-	    ICH6
-	    ICH7
-	    ESB2
-	    ICH8
-	    ICH9
-	    Tolapai
-	    ICH10
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-i801.
-
-config I2C_I810
-	tristate "Intel 810/815 (DEPRECATED)"
-	default n
-	depends on PCI
-	select I2C_ALGOBIT
-	help
-	  If you say yes to this option, support will be included for the Intel
-	  810/815 family of mainboard I2C interfaces.  Specifically, the
-	  following versions of the chipset are supported:
-	    i810AA
-	    i810AB
-	    i810E
-	    i815
-	    i845G
-
-	  This driver is deprecated in favor of the i810fb and intelfb drivers.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-i810.
-
-config I2C_PXA
-	tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ARCH_PXA
-	help
-	  If you have devices in the PXA I2C bus, say yes to this option.
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-pxa.
-
-config I2C_PXA_SLAVE
-	bool "Intel PXA2XX I2C Slave comms support"
-	depends on I2C_PXA
-	help
-	  Support I2C slave mode communications on the PXA I2C bus.  This
-	  is necessary for systems where the PXA may be a target on the
-	  I2C bus.
-
-config I2C_PIIX4
-	tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
-	depends on PCI
-	help
-	  If you say yes to this option, support will be included for the Intel
-	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset are supported (note that Serverworks is part
-	  of Broadcom):
-	    Intel PIIX4
-	    Intel 440MX
-	    ATI IXP200
-	    ATI IXP300
-	    ATI IXP400
-	    ATI SB600
-	    ATI SB700
-	    ATI SB800
-	    Serverworks OSB4
-	    Serverworks CSB5
-	    Serverworks CSB6
-	    Serverworks HT-1000
-	    SMSC Victory66
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-piix4.
-
 config I2C_IBM_IIC
 	tristate "IBM PPC 4xx on-chip I2C interface"
 	depends on 4xx
@@ -281,18 +364,6 @@ config I2C_IXP2000
 	  This driver is deprecated and will be dropped soon. Use i2c-gpio
 	  instead.
 
-config I2C_POWERMAC
-	tristate "Powermac I2C interface"
-	depends on PPC_PMAC
-	default y
-	help
-	  This exposes the various PowerMac i2c interfaces to the linux i2c
-	  layer and to userland. It is used by various drivers on the PowerMac
-	  platform, and should generally be enabled.
-
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-powermac.
-
 config I2C_MPC
 	tristate "MPC107/824x/85xx/52xx/86xx"
 	depends on PPC32
@@ -305,15 +376,15 @@ config I2C_MPC
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mpc.
 
-config I2C_NFORCE2
-	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+config I2C_MV64XXX
+	tristate "Marvell mv64xxx I2C Controller"
+	depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
 	help
-	  If you say yes to this option, support will be included for the Nvidia
-	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Marvell 64xxx line of host bridges.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-nforce2.
+	  will be called i2c-mv64xxx.
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
@@ -336,76 +407,37 @@ config I2C_OMAP
 	  Like OMAP1510/1610/1710/5912 and OMAP242x.
 	  For details see http://www.ti.com/omap.
 
-config I2C_PARPORT
-	tristate "Parallel port adapter"
-	depends on PARPORT
-	select I2C_ALGOBIT
-	help
-	  This supports parallel port I2C adapters such as the ones made by
-	  Philips or Velleman, Analog Devices evaluation boards, and more.
-	  Basically any adapter using the parallel port as an I2C bus with
-	  no extra chipset is supported by this driver, or could be.
-
-	  This driver is a replacement for (and was inspired by) an older
-	  driver named i2c-philips-par.  The new driver supports more devices,
-	  and makes it easier to add support for new devices.
-
-	  An adapter type parameter is now mandatory.  Please read the file
-	  Documentation/i2c/busses/i2c-parport for details.
-
-	  Another driver exists, named i2c-parport-light, which doesn't depend
-	  on the parport driver.  This is meant for embedded systems. Don't say
-	  Y here if you intend to say Y or M there.
-
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-parport.
-
-config I2C_PARPORT_LIGHT
-	tristate "Parallel port adapter (light)"
-	select I2C_ALGOBIT
-	help
-	  This supports parallel port I2C adapters such as the ones made by
-	  Philips or Velleman, Analog Devices evaluation boards, and more.
-	  Basically any adapter using the parallel port as an I2C bus with
-	  no extra chipset is supported by this driver, or could be.
-
-	  This driver is a light version of i2c-parport.  It doesn't depend
-	  on the parport driver, and uses direct I/O access instead.  This
-	  might be preferred on embedded systems where wasting memory for
-	  the clean but heavy parport handling is not an option.  The
-	  drawback is a reduced portability and the impossibility to
-	  daisy-chain other parallel port devices.
-
-	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
-	  both is possible but both modules should not be loaded at the same
-	  time.
-
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-parport-light.
-
 config I2C_PASEMI
 	tristate "PA Semi SMBus interface"
 	depends on PPC_PASEMI && PCI
 	help
 	  Supports the PA Semi PWRficient on-chip SMBus interfaces.
 
-config I2C_PROSAVAGE
-	tristate "S3/VIA (Pro)Savage (DEPRECATED)"
-	default n
-	depends on PCI
-	select I2C_ALGOBIT
+config I2C_PNX
+	tristate "I2C bus support for Philips PNX targets"
+	depends on ARCH_PNX4008
 	help
-	  If you say yes to this option, support will be included for the
-	  I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
-	  graphics processors.
-	  chipsets supported:
-	    S3/VIA KM266/VT8375 aka ProSavage8
-	    S3/VIA KM133/VT8365 aka Savage4
+	  This driver supports the Philips IP3204 I2C IP block master and/or
+	  slave controller
 
-	  This driver is deprecated in favor of the savagefb driver.
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pnx.
 
-	  This support is also available as a module.  If so, the module
-	  will be called i2c-prosavage.
+config I2C_PXA
+	tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ARCH_PXA
+	help
+	  If you have devices in the PXA I2C bus, say yes to this option.
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pxa.
+
+config I2C_PXA_SLAVE
+	bool "Intel PXA2XX I2C Slave comms support"
+	depends on I2C_PXA
+	help
+	  Support I2C slave mode communications on the PXA I2C bus.  This
+	  is necessary for systems where the PXA may be a target on the
+	  I2C bus.
 
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
@@ -414,25 +446,24 @@ config I2C_S3C2410
 	  Say Y here to include support for I2C controller in the
 	  Samsung S3C2410 based System-on-Chip devices.
 
-config I2C_SAVAGE4
-	tristate "S3 Savage 4 (DEPRECATED)"
-	default n
-	depends on PCI
-	select I2C_ALGOBIT
+config I2C_SH7760
+	tristate "Renesas SH7760 I2C Controller"
+	depends on CPU_SUBTYPE_SH7760
 	help
-	  If you say yes to this option, support will be included for the
-	  S3 Savage 4 I2C interface.
-
-	  This driver is deprecated in favor of the savagefb driver.
+	  This driver supports the 2 I2C interfaces on the Renesas SH7760.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-savage4.
+	  will be called i2c-sh7760.
 
-config I2C_SIBYTE
-	tristate "SiByte SMBus interface"
-	depends on SIBYTE_SB1xxx_SOC
+config I2C_SH_MOBILE
+	tristate "SuperH Mobile I2C Controller"
+	depends on SUPERH
 	help
-	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Renesas SH-Mobile processor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-sh_mobile.
 
 config I2C_SIMTEC
 	tristate "Simtec Generic I2C interface"
@@ -446,86 +477,65 @@ config I2C_SIMTEC
 	  This driver can also be built as a module. If so, the module
 	  will be called i2c-simtec.
 
-config SCx200_I2C
-	tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
-	depends on SCx200_GPIO
+config I2C_VERSATILE
+	tristate "ARM Versatile/Realview I2C bus support"
+	depends on ARCH_VERSATILE || ARCH_REALVIEW
 	select I2C_ALGOBIT
 	help
-	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
-
-	  If you don't know what to do here, say N.
+	  Say yes if you want to support the I2C serial bus on ARMs Versatile
+	  range of platforms.
 
-	  This support is also available as a module.  If so, the module
-	  will be called scx200_i2c.
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-versatile.
 
-	  This driver is deprecated and will be dropped soon. Use i2c-gpio
-	  (or scx200_acb) instead.
+comment "External I2C/SMBus adapter drivers"
 
-config SCx200_I2C_SCL
-	int "GPIO pin used for SCL"
-	depends on SCx200_I2C
-	default "12"
+config I2C_PARPORT
+	tristate "Parallel port adapter"
+	depends on PARPORT
+	select I2C_ALGOBIT
 	help
-	  Enter the GPIO pin number used for the SCL signal.  This value can
-	  also be specified with a module parameter.
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
 
-config SCx200_I2C_SDA
-	int "GPIO pin used for SDA"
-	depends on SCx200_I2C
-	default "13"
-	help
-	  Enter the GPIO pin number used for the SSA signal.  This value can
-	  also be specified with a module parameter.
+	  This driver is a replacement for (and was inspired by) an older
+	  driver named i2c-philips-par.  The new driver supports more devices,
+	  and makes it easier to add support for new devices.
 
-config SCx200_ACB
-	tristate "Geode ACCESS.bus support"
-	depends on X86_32 && PCI
-	help
-	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
-	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+	  An adapter type parameter is now mandatory.  Please read the file
+	  Documentation/i2c/busses/i2c-parport for details.
 
-	  If you don't know what to do here, say N.
+	  Another driver exists, named i2c-parport-light, which doesn't depend
+	  on the parport driver.  This is meant for embedded systems. Don't say
+	  Y here if you intend to say Y or M there.
 
 	  This support is also available as a module.  If so, the module
-	  will be called scx200_acb.
-
-config I2C_SIS5595
-	tristate "SiS 5595"
-	depends on PCI
-	help
-	  If you say yes to this option, support will be included for the
-	  SiS5595 SMBus (a subset of I2C) interface.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-sis5595.
+	  will be called i2c-parport.
 
-config I2C_SIS630
-	tristate "SiS 630/730"
-	depends on PCI
+config I2C_PARPORT_LIGHT
+	tristate "Parallel port adapter (light)"
+	select I2C_ALGOBIT
 	help
-	  If you say yes to this option, support will be included for the
-	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
+	  This supports parallel port I2C adapters such as the ones made by
+	  Philips or Velleman, Analog Devices evaluation boards, and more.
+	  Basically any adapter using the parallel port as an I2C bus with
+	  no extra chipset is supported by this driver, or could be.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-sis630.
+	  This driver is a light version of i2c-parport.  It doesn't depend
+	  on the parport driver, and uses direct I/O access instead.  This
+	  might be preferred on embedded systems where wasting memory for
+	  the clean but heavy parport handling is not an option.  The
+	  drawback is a reduced portability and the impossibility to
+	  daisy-chain other parallel port devices.
 
-config I2C_SIS96X
-	tristate "SiS 96x"
-	depends on PCI
-	help
-	  If you say yes to this option, support will be included for the SiS
-	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
-	  chipsets are supported:
-	    645/961
-	    645DX/961
-	    645DX/962
-	    648/961
-	    650/961
-	    735
-	    745
+	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
+	  both is possible but both modules should not be loaded at the same
+	  time.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-sis96x.
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-parport-light.
 
 config I2C_TAOS_EVM
 	tristate "TAOS evaluation module"
@@ -543,21 +553,8 @@ config I2C_TAOS_EVM
 	  This support is also available as a module.  If so, the module
 	  will be called i2c-taos-evm.
 
-config I2C_STUB
-	tristate "I2C/SMBus Test Stub"
-	depends on EXPERIMENTAL && m
-	default 'n'
-	help
-	  This module may be useful to developers of SMBus client drivers,
-	  especially for certain kinds of sensor chips.
-
-	  If you do build this module, be sure to read the notes and warnings
-	  in <file:Documentation/i2c/i2c-stub>.
-
-	  If you don't know what to do here, definitely say N.
-
 config I2C_TINY_USB
-	tristate "I2C-Tiny-USB"
+	tristate "Tiny-USB adapter"
 	depends on USB
 	help
 	  If you say yes to this option, support will be included for the
@@ -567,16 +564,21 @@ config I2C_TINY_USB
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-tiny-usb.
 
-config I2C_VERSATILE
-	tristate "ARM Versatile/Realview I2C bus support"
-	depends on ARCH_VERSATILE || ARCH_REALVIEW
+comment "Graphics adapter I2C/DDC channel drivers"
+	depends on PCI
+
+config I2C_VOODOO3
+	tristate "Voodoo 3"
+	depends on PCI
 	select I2C_ALGOBIT
 	help
-	  Say yes if you want to support the I2C serial bus on ARMs Versatile
-	  range of platforms.
+	  If you say yes to this option, support will be included for the
+	  Voodoo 3 I2C interface.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-versatile.
+	  will be called i2c-voodoo3.
+
+comment "Other I2C/SMBus bus drivers"
 
 config I2C_ACORN
 	tristate "Acorn IOC/IOMD I2C bus support"
@@ -588,46 +590,16 @@ config I2C_ACORN
 
 	  If you don't know, say Y.
 
-config I2C_VIA
-	tristate "VIA 82C586B"
-	depends on PCI && EXPERIMENTAL
-	select I2C_ALGOBIT
-	help
-	  If you say yes to this option, support will be included for the VIA
-          82C586B I2C interface
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-via.
-
-config I2C_VIAPRO
-	tristate "VIA VT82C596/82C686/82xx and CX700"
-	depends on PCI
-	help
-	  If you say yes to this option, support will be included for the VIA
-	  VT82C596 and later SMBus interface.  Specifically, the following
-	  chipsets are supported:
-	    VT82C596A/B
-	    VT82C686A/B
-	    VT8231
-	    VT8233/A
-	    VT8235
-	    VT8237R/A/S
-	    VT8251
-	    CX700
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-viapro.
-
-config I2C_VOODOO3
-	tristate "Voodoo 3"
-	depends on PCI
-	select I2C_ALGOBIT
+config I2C_ELEKTOR
+	tristate "Elektor ISA card"
+	depends on ISA && BROKEN_ON_SMP
+	select I2C_ALGOPCF
 	help
-	  If you say yes to this option, support will be included for the
-	  Voodoo 3 I2C interface.
+	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+	  such an adapter.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-voodoo3.
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-elektor.
 
 config I2C_PCA_ISA
 	tristate "PCA9564 on an ISA bus"
@@ -657,26 +629,6 @@ config I2C_PCA_PLATFORM
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pca-platform.
 
-config I2C_MV64XXX
-	tristate "Marvell mv64xxx I2C Controller"
-	depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
-	help
-	  If you say yes to this option, support will be included for the
-	  built-in I2C interface on the Marvell 64xxx line of host bridges.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-mv64xxx.
-
-config I2C_PNX
-	tristate "I2C bus support for Philips PNX targets"
-	depends on ARCH_PNX4008
-	help
-	  This driver supports the Philips IP3204 I2C IP block master and/or
-	  slave controller
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-pnx.
-
 config I2C_PMCMSP
 	tristate "PMC MSP I2C TWI Controller"
 	depends on PMC_MSP
@@ -686,23 +638,66 @@ config I2C_PMCMSP
 	  This driver can also be built as module. If so, the module
 	  will be called i2c-pmcmsp.
 
-config I2C_SH7760
-	tristate "Renesas SH7760 I2C Controller"
-	depends on CPU_SUBTYPE_SH7760
+config I2C_SIBYTE
+	tristate "SiByte SMBus interface"
+	depends on SIBYTE_SB1xxx_SOC
 	help
-	  This driver supports the 2 I2C interfaces on the Renesas SH7760.
+	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-sh7760.
+config I2C_STUB
+	tristate "I2C/SMBus Test Stub"
+	depends on EXPERIMENTAL && m
+	default 'n'
+	help
+	  This module may be useful to developers of SMBus client drivers,
+	  especially for certain kinds of sensor chips.
 
-config I2C_SH_MOBILE
-	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH
+	  If you do build this module, be sure to read the notes and warnings
+	  in <file:Documentation/i2c/i2c-stub>.
+
+	  If you don't know what to do here, definitely say N.
+
+config SCx200_I2C
+	tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
+	depends on SCx200_GPIO
+	select I2C_ALGOBIT
 	help
-	  If you say yes to this option, support will be included for the
-	  built-in I2C interface on the Renesas SH-Mobile processor.
+	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-sh_mobile.
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called scx200_i2c.
+
+	  This driver is deprecated and will be dropped soon. Use i2c-gpio
+	  (or scx200_acb) instead.
+
+config SCx200_I2C_SCL
+	int "GPIO pin used for SCL"
+	depends on SCx200_I2C
+	default "12"
+	help
+	  Enter the GPIO pin number used for the SCL signal.  This value can
+	  also be specified with a module parameter.
+
+config SCx200_I2C_SDA
+	int "GPIO pin used for SDA"
+	depends on SCx200_I2C
+	default "13"
+	help
+	  Enter the GPIO pin number used for the SSA signal.  This value can
+	  also be specified with a module parameter.
+
+config SCx200_ACB
+	tristate "Geode ACCESS.bus support"
+	depends on X86_32 && PCI
+	help
+	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+
+	  If you don't know what to do here, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called scx200_acb.
 
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e8c882a..97dbfa2 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -2,57 +2,68 @@
 # Makefile for the i2c bus drivers.
 #
 
+# PC SMBus host controller drivers
 obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
 obj-$(CONFIG_I2C_ALI1563)	+= i2c-ali1563.o
 obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
 obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
+obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_ISCH)		+= i2c-isch.o
+obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_NFORCE2_S4985)	+= i2c-nforce2-s4985.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
+obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
+obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
+obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+
+# Mac SMBus host controller drivers
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
+
+# Embebbed system I2C/SMBus host controller drivers
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
-obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
-obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
-obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
-obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
-obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
-obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
-obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
-obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
-obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
-obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
-obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
-obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
-obj-$(CONFIG_I2C_SAVAGE4)	+= i2c-savage4.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
-obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
-obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
-obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
-obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
-obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
+obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+
+# External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
+obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
 obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
-obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
-obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
-obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
-obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+
+# Graphics adapter I2C/DDC channel drivers
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+
+# Other I2C/SMBus bus drivers
+obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
+obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
+obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
+obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f14372a..9cead9b 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -1,6 +1,4 @@
 /*
-    i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware
-                    monitoring
     Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
                         Philip Edelbrock <phil@netroedge.com>, 
                         Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -61,6 +59,7 @@
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 
@@ -159,6 +158,11 @@ static int ali1535_setup(struct pci_dev *dev)
 		goto exit;
 	}
 
+	retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+				   ali1535_driver.name);
+	if (retval)
+		goto exit;
+
 	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
 			    ali1535_driver.name)) {
 		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
@@ -259,7 +263,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 			dev_err(&adap->dev,
 				"SMBus reset failed! (0x%02x) - controller or "
 				"device on bus is probably hung\n", temp);
-			return -1;
+			return -EBUSY;
 		}
 	} else {
 		/* check and clear done bit */
@@ -281,12 +285,12 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "SMBus Timeout!\n");
 	}
 
 	if (temp & ALI1535_STS_FAIL) {
-		result = -1;
+		result = -EIO;
 		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
 	}
 
@@ -295,7 +299,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	 * do a printk.  This means that bus collisions go unreported.
 	 */
 	if (temp & ALI1535_STS_BUSERR) {
-		result = -1;
+		result = -ENXIO;
 		dev_dbg(&adap->dev,
 			"Error: no response or bus collision ADD=%02x\n",
 			inb_p(SMBHSTADD));
@@ -303,13 +307,13 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 
 	/* haven't ever seen this */
 	if (temp & ALI1535_STS_DEV) {
-		result = -1;
+		result = -EIO;
 		dev_err(&adap->dev, "Error: device error\n");
 	}
 
 	/* check to see if the "command complete" indication is set */
 	if (!(temp & ALI1535_STS_DONE)) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "Error: command never completed\n");
 	}
 
@@ -332,7 +336,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 			  unsigned short flags, char read_write, u8 command,
 			  int size, union i2c_smbus_data *data)
@@ -357,10 +361,6 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 	outb_p(0xFF, SMBHSTSTS);
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		result = -1;
-		goto EXIT;
 	case I2C_SMBUS_QUICK:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
@@ -418,13 +418,15 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 				outb_p(data->block[i], SMBBLKDAT);
 		}
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		result = -EOPNOTSUPP;
+		goto EXIT;
 	}
 
-	if (ali1535_transaction(adap)) {
-		/* Error in transaction */
-		result = -1;
+	result = ali1535_transaction(adap);
+	if (result)
 		goto EXIT;
-	}
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
 		result = 0;
@@ -475,7 +477,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_ALI1535,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 6b68074..fc3e5b0 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -21,6 +21,7 @@
 #include <linux/i2c.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 
 #define ALI1563_MAX_TIMEOUT	500
 #define	ALI1563_SMBBA		0x80
@@ -67,6 +68,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 {
 	u32 data;
 	int timeout;
+	int status = -EIO;
 
 	dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
 		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -103,13 +105,15 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 		/* Issue 'kill' to host controller */
 		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
 		data = inb_p(SMB_HST_STS);
+		status = -ETIMEDOUT;
  	}
 
 	/* device error - no response, ignore the autodetection case */
-	if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
-		dev_err(&a->dev, "Device error!\n");
+	if (data & HST_STS_DEVERR) {
+		if (size != HST_CNTL2_QUICK)
+			dev_err(&a->dev, "Device error!\n");
+		status = -ENXIO;
 	}
-
 	/* bus collision */
 	if (data & HST_STS_BUSERR) {
 		dev_err(&a->dev, "Bus collision!\n");
@@ -122,13 +126,14 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 		outb_p(0x0,SMB_HST_CNTL2);
 	}
 
-	return -1;
+	return status;
 }
 
 static int ali1563_block_start(struct i2c_adapter * a)
 {
 	u32 data;
 	int timeout;
+	int status = -EIO;
 
 	dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
 		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -164,13 +169,20 @@ static int ali1563_block_start(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
+
+	if (timeout == 0)
+		status = -ETIMEDOUT;
+
+	if (data & HST_STS_DEVERR)
+		status = -ENXIO;
+
 	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
-		timeout ? "Timeout " : "",
+		timeout ? "" : "Timeout ",
 		data & HST_STS_FAIL ? "Transaction Failed " : "",
 		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
 		data & HST_STS_DEVERR ? "Device Error " : "",
 		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
-	return -1;
+	return status;
 }
 
 static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
@@ -235,10 +247,6 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 
 	/* Map the size to what the chip understands */
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		error = -EINVAL;
-		break;
 	case I2C_SMBUS_QUICK:
 		size = HST_CNTL2_QUICK;
 		break;
@@ -254,6 +262,10 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	case I2C_SMBUS_BLOCK_DATA:
 		size = HST_CNTL2_BLOCK;
 		break;
+	default:
+		dev_warn(&a->dev, "Unsupported transaction %d\n", size);
+		error = -EOPNOTSUPP;
+		goto Done;
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
@@ -345,6 +357,10 @@ static int __devinit ali1563_setup(struct pci_dev * dev)
 		}
 	}
 
+	if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+			      ali1563_pci_driver.name))
+		goto Err;
+
 	if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
 			    ali1563_pci_driver.name)) {
 		dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
@@ -371,7 +387,7 @@ static const struct i2c_algorithm ali1563_algorithm = {
 static struct i2c_adapter ali1563_adapter = {
 	.owner	= THIS_MODULE,
 	.id	= I2C_HW_SMBUS_ALI1563,
-	.class	= I2C_CLASS_HWMON,
+	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo	= &ali1563_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 93bf87d..234fdde 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -1,6 +1,4 @@
 /*
-    ali15x3.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1999  Frodo Looijaard <frodol@dds.nl> and
     Philip Edelbrock <phil@netroedge.com> and
     Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -68,6 +66,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 /* ALI15X3 SMBus address offsets */
@@ -166,6 +165,10 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
 	if(force_addr)
 		ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
 
+	if (acpi_check_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+			      ali15x3_driver.name))
+		return -EBUSY;
+
 	if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
 			    ali15x3_driver.name)) {
 		dev_err(&ALI15X3_dev->dev,
@@ -282,7 +285,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 			dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - "
 				"controller or device on bus is probably hung\n",
 				temp);
-			return -1;
+			return -EBUSY;
 		}
 	} else {
 		/* check and clear done bit */
@@ -304,12 +307,12 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "SMBus Timeout!\n");
 	}
 
 	if (temp & ALI15X3_STS_TERM) {
-		result = -1;
+		result = -EIO;
 		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
 	}
 
@@ -320,7 +323,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 	  This means that bus collisions go unreported.
 	*/
 	if (temp & ALI15X3_STS_COLL) {
-		result = -1;
+		result = -ENXIO;
 		dev_dbg(&adap->dev,
 			"Error: no response or bus collision ADD=%02x\n",
 			inb_p(SMBHSTADD));
@@ -328,7 +331,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 
 	/* haven't ever seen this */
 	if (temp & ALI15X3_STS_DEV) {
-		result = -1;
+		result = -EIO;
 		dev_err(&adap->dev, "Error: device error\n");
 	}
 	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, "
@@ -338,7 +341,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 		   unsigned short flags, char read_write, u8 command,
 		   int size, union i2c_smbus_data * data)
@@ -362,9 +365,6 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 	}
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		return -1;
 	case I2C_SMBUS_QUICK:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
@@ -417,12 +417,16 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = ALI15X3_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	outb_p(size, SMBHSTCNT);	/* output command */
 
-	if (ali15x3_transaction(adap))	/* Error in transaction */
-		return -1;
+	temp = ali15x3_transaction(adap);
+	if (temp)
+		return temp;
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK))
 		return 0;
@@ -470,7 +474,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_ALI15X3,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index c38a0a1..2f150e3 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -58,7 +58,7 @@ static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
 	/* We exclude the multiplexed addresses */
 	if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
 	 || addr == 0x18)
-		return -1;
+		return -ENXIO;
 
 	mutex_lock(&amd756_lock);
 
@@ -86,7 +86,7 @@ static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr,
 
 	/* We exclude the non-multiplexed addresses */
 	if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
-		return -1;
+		return -ENXIO;
 
 	mutex_lock(&amd756_lock);
 
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 43508d6..1ea3925 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -1,7 +1,4 @@
 /*
-    amd756.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
-
     Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
 
     Shamelessly ripped from i2c-piix4.c:
@@ -45,6 +42,7 @@
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 /* AMD756 SMBus address offsets */
@@ -151,17 +149,17 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	}
 
 	if (temp & GS_PRERR_STS) {
-		result = -1;
+		result = -ENXIO;
 		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
 	}
 
 	if (temp & GS_COL_STS) {
-		result = -1;
+		result = -EIO;
 		dev_warn(&adap->dev, "SMBus collision!\n");
 	}
 
 	if (temp & GS_TO_STS) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
 	}
 
@@ -189,22 +187,18 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
 	msleep(100);
 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
-	return -1;
+	return -EIO;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 		  unsigned short flags, char read_write,
 		  u8 command, int size, union i2c_smbus_data * data)
 {
 	int i, len;
+	int status;
 
-	/** TODO: Should I supporte the 10-bit transfers? */
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		/* TODO: Well... It is supported, I'm just not sure what to do here... */
-		return -1;
 	case I2C_SMBUS_QUICK:
 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMB_HOST_ADDRESS);
@@ -251,13 +245,17 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = AMD756_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	/* How about enabling interrupts... */
 	outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
 
-	if (amd756_transaction(adap))	/* Error in transaction */
-		return -1;
+	status = amd756_transaction(adap);
+	if (status)
+		return status;
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
 		return 0;
@@ -301,7 +299,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_AMD756,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
@@ -368,6 +366,11 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
 		amd756_ioport += SMB_ADDR_OFFSET;
 	}
 
+	error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
+				  amd756_driver.name);
+	if (error)
+		return error;
+
 	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
 		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
 			amd756_ioport);
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 5d1a27e..3972208 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 MODULE_LICENSE("GPL");
@@ -77,7 +78,7 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
 	if (!timeout) {
 		dev_warn(&smbus->dev->dev,
 			 "Timeout while waiting for IBF to clear\n");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	return 0;
@@ -93,7 +94,7 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
 	if (!timeout) {
 		dev_warn(&smbus->dev->dev,
 			 "Timeout while waiting for OBF to set\n");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	return 0;
@@ -102,16 +103,21 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
 static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
 		unsigned char *data)
 {
-	if (amd_ec_wait_write(smbus))
-		return -1;
+	int status;
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
 	outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD);
 
-	if (amd_ec_wait_write(smbus))
-		return -1;
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
 	outb(address, smbus->base + AMD_EC_DATA);
 
-	if (amd_ec_wait_read(smbus))
-		return -1;
+	status = amd_ec_wait_read(smbus);
+	if (status)
+		return status;
 	*data = inb(smbus->base + AMD_EC_DATA);
 
 	return 0;
@@ -120,16 +126,21 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
 static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
 		unsigned char data)
 {
-	if (amd_ec_wait_write(smbus))
-		return -1;
+	int status;
+
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
 	outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD);
 
-	if (amd_ec_wait_write(smbus))
-		return -1;
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
 	outb(address, smbus->base + AMD_EC_DATA);
 
-	if (amd_ec_wait_write(smbus))
-		return -1;
+	status = amd_ec_wait_write(smbus);
+	if (status)
+		return status;
 	outb(data, smbus->base + AMD_EC_DATA);
 
 	return 0;
@@ -267,12 +278,17 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
 
 		default:
 			dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
-			return -1;
+			return -EOPNOTSUPP;
 	}
 
 	amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
 	amd_ec_write(smbus, AMD_SMB_PRTCL, protocol);
 
+	/* FIXME this discards status from ec_read(); so temp[0] will
+	 * hold stack garbage ... the rest of this routine will act
+	 * nonsensically.  Ignored ec_write() status might explain
+	 * some such failures...
+	 */
 	amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
 
 	if (~temp[0] & AMD_SMB_STS_DONE) {
@@ -286,7 +302,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
 	}
 
 	if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS))
-		return -1;
+		return -EIO;
 
 	if (read_write == I2C_SMBUS_WRITE)
 		return 0;
@@ -359,6 +375,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
 	smbus->base = pci_resource_start(dev, 0);
 	smbus->size = pci_resource_len(dev, 0);
 
+	error = acpi_check_resource_conflict(&dev->resource[0]);
+	if (error)
+		goto out_kfree;
+
 	if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
 		error = -EBUSY;
 		goto out_kfree;
@@ -368,7 +388,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		"SMBus2 AMD8111 adapter at %04x", smbus->base);
 	smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
-	smbus->adapter.class = I2C_CLASS_HWMON;
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index cae9dc8..66a04c2 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -269,9 +269,13 @@ static int
 au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 {
 	struct i2c_au1550_data *adap = i2c_adap->algo_data;
+	volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base;
 	struct i2c_msg *p;
 	int i, err = 0;
 
+	sp->psc_ctrl = PSC_CTRL_ENABLE;
+	au_sync();
+
 	for (i = 0; !err && i < num; i++) {
 		p = &msgs[i];
 		err = do_address(adap, p->addr, p->flags & I2C_M_RD,
@@ -288,6 +292,10 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 	*/
 	if (err == 0)
 		err = num;
+
+	sp->psc_ctrl = PSC_CTRL_SUSPEND;
+	au_sync();
+
 	return err;
 }
 
@@ -302,6 +310,61 @@ static const struct i2c_algorithm au1550_algo = {
 	.functionality	= au1550_func,
 };
 
+static void i2c_au1550_setup(struct i2c_au1550_data *priv)
+{
+	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+	u32 stat;
+
+	sp->psc_ctrl = PSC_CTRL_DISABLE;
+	au_sync();
+	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
+	sp->psc_smbcfg = 0;
+	au_sync();
+	sp->psc_ctrl = PSC_CTRL_ENABLE;
+	au_sync();
+	do {
+		stat = sp->psc_smbstat;
+		au_sync();
+	} while ((stat & PSC_SMBSTAT_SR) == 0);
+
+	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
+				PSC_SMBCFG_DD_DISABLE);
+
+	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
+	 * timings are based on this clock.
+	 */
+	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
+	au_sync();
+
+	/* Set the protocol timer values.  See Table 71 in the
+	 * Au1550 Data Book for standard timing values.
+	 */
+	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
+		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
+		PSC_SMBTMR_SET_CH(15);
+	au_sync();
+
+	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
+	do {
+		stat = sp->psc_smbstat;
+		au_sync();
+	} while ((stat & PSC_SMBSTAT_SR) == 0);
+
+	sp->psc_ctrl = PSC_CTRL_SUSPEND;
+	au_sync();
+}
+
+static void i2c_au1550_disable(struct i2c_au1550_data *priv)
+{
+	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
+
+	sp->psc_smbcfg = 0;
+	sp->psc_ctrl = PSC_CTRL_DISABLE;
+	au_sync();
+}
+
 /*
  * registering functions to load algorithms at runtime
  * Prior to calling us, the 50MHz clock frequency and routing
@@ -311,9 +374,7 @@ static int __devinit
 i2c_au1550_probe(struct platform_device *pdev)
 {
 	struct i2c_au1550_data *priv;
-	volatile psc_smb_t *sp;
 	struct resource *r;
-	u32 stat;
 	int ret;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -348,43 +409,7 @@ i2c_au1550_probe(struct platform_device *pdev)
 
 	/* Now, set up the PSC for SMBus PIO mode.
 	*/
-	sp = (volatile psc_smb_t *)priv->psc_base;
-	sp->psc_ctrl = PSC_CTRL_DISABLE;
-	au_sync();
-	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
-	sp->psc_smbcfg = 0;
-	au_sync();
-	sp->psc_ctrl = PSC_CTRL_ENABLE;
-	au_sync();
-	do {
-		stat = sp->psc_smbstat;
-		au_sync();
-	} while ((stat & PSC_SMBSTAT_SR) == 0);
-
-	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
-				PSC_SMBCFG_DD_DISABLE);
-
-	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
-	 * timings are based on this clock.
-	 */
-	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
-	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
-	au_sync();
-
-	/* Set the protocol timer values.  See Table 71 in the
-	 * Au1550 Data Book for standard timing values.
-	 */
-	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
-		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
-		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
-		PSC_SMBTMR_SET_CH(15);
-	au_sync();
-
-	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
-	do {
-		stat = sp->psc_smbstat;
-		au_sync();
-	} while ((stat & PSC_SMBSTAT_DR) == 0);
+	i2c_au1550_setup(priv);
 
 	ret = i2c_add_numbered_adapter(&priv->adap);
 	if (ret == 0) {
@@ -392,10 +417,7 @@ i2c_au1550_probe(struct platform_device *pdev)
 		return 0;
 	}
 
-	/* disable the PSC */
-	sp->psc_smbcfg = 0;
-	sp->psc_ctrl = PSC_CTRL_DISABLE;
-	au_sync();
+	i2c_au1550_disable(priv);
 
 	release_resource(priv->ioarea);
 	kfree(priv->ioarea);
@@ -409,27 +431,24 @@ static int __devexit
 i2c_au1550_remove(struct platform_device *pdev)
 {
 	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
 
 	platform_set_drvdata(pdev, NULL);
 	i2c_del_adapter(&priv->adap);
-	sp->psc_smbcfg = 0;
-	sp->psc_ctrl = PSC_CTRL_DISABLE;
-	au_sync();
+	i2c_au1550_disable(priv);
 	release_resource(priv->ioarea);
 	kfree(priv->ioarea);
 	kfree(priv);
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int
 i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
 
-	sp->psc_ctrl = PSC_CTRL_SUSPEND;
-	au_sync();
+	i2c_au1550_disable(priv);
+
 	return 0;
 }
 
@@ -437,14 +456,15 @@ static int
 i2c_au1550_resume(struct platform_device *pdev)
 {
 	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
 
-	sp->psc_ctrl = PSC_CTRL_ENABLE;
-	au_sync();
-	while (!(sp->psc_smbstat & PSC_SMBSTAT_SR))
-		au_sync();
+	i2c_au1550_setup(priv);
+
 	return 0;
 }
+#else
+#define i2c_au1550_suspend	NULL
+#define i2c_au1550_resume	NULL
+#endif
 
 static struct platform_driver au1xpsc_smbus_driver = {
 	.driver = {
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
new file mode 100644
index 0000000..8164de1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -0,0 +1,745 @@
+/*
+ * Freescale CPM1/CPM2 I2C interface.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * moved into proper i2c interface;
+ * Brad Parker (brad@heeltoe.com)
+ *
+ * Parts from dbox2_i2c.c (cvs.tuxbox.org)
+ * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net)
+ *
+ * (C) 2007 Montavista Software, Inc.
+ * Vitaly Bordug <vitb@kernel.crashing.org>
+ *
+ * Converted to of_platform_device. Renamed to i2c-cpm.c.
+ * (C) 2007,2008 Jochen Friedrich <jochen@scram.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_i2c.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/cpm.h>
+
+/* Try to define this if you have an older CPU (earlier than rev D4) */
+/* However, better use a GPIO based bitbang driver in this case :/   */
+#undef	I2C_CHIP_ERRATA
+
+#define CPM_MAX_READ    513
+#define CPM_MAXBD       4
+
+#define I2C_EB			(0x10) /* Big endian mode */
+#define I2C_EB_CPM2		(0x30) /* Big endian mode, memory snoop */
+
+#define DPRAM_BASE		((u8 __iomem __force *)cpm_muram_addr(0))
+
+/* I2C parameter RAM. */
+struct i2c_ram {
+	ushort  rbase;		/* Rx Buffer descriptor base address */
+	ushort  tbase;		/* Tx Buffer descriptor base address */
+	u_char  rfcr;		/* Rx function code */
+	u_char  tfcr;		/* Tx function code */
+	ushort  mrblr;		/* Max receive buffer length */
+	uint    rstate;		/* Internal */
+	uint    rdp;		/* Internal */
+	ushort  rbptr;		/* Rx Buffer descriptor pointer */
+	ushort  rbc;		/* Internal */
+	uint    rxtmp;		/* Internal */
+	uint    tstate;		/* Internal */
+	uint    tdp;		/* Internal */
+	ushort  tbptr;		/* Tx Buffer descriptor pointer */
+	ushort  tbc;		/* Internal */
+	uint    txtmp;		/* Internal */
+	char    res1[4];	/* Reserved */
+	ushort  rpbase;		/* Relocation pointer */
+	char    res2[2];	/* Reserved */
+};
+
+#define I2COM_START	0x80
+#define I2COM_MASTER	0x01
+#define I2CER_TXE	0x10
+#define I2CER_BUSY	0x04
+#define I2CER_TXB	0x02
+#define I2CER_RXB	0x01
+#define I2MOD_EN	0x01
+
+/* I2C Registers */
+struct i2c_reg {
+	u8	i2mod;
+	u8	res1[3];
+	u8	i2add;
+	u8	res2[3];
+	u8	i2brg;
+	u8	res3[3];
+	u8	i2com;
+	u8	res4[3];
+	u8	i2cer;
+	u8	res5[3];
+	u8	i2cmr;
+};
+
+struct cpm_i2c {
+	char *base;
+	struct of_device *ofdev;
+	struct i2c_adapter adap;
+	uint dp_addr;
+	int version; /* CPM1=1, CPM2=2 */
+	int irq;
+	int cp_command;
+	int freq;
+	struct i2c_reg __iomem *i2c_reg;
+	struct i2c_ram __iomem *i2c_ram;
+	u16 i2c_addr;
+	wait_queue_head_t i2c_wait;
+	cbd_t __iomem *tbase;
+	cbd_t __iomem *rbase;
+	u_char *txbuf[CPM_MAXBD];
+	u_char *rxbuf[CPM_MAXBD];
+	u32 txdma[CPM_MAXBD];
+	u32 rxdma[CPM_MAXBD];
+};
+
+static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
+{
+	struct cpm_i2c *cpm;
+	struct i2c_reg __iomem *i2c_reg;
+	struct i2c_adapter *adap = dev_id;
+	int i;
+
+	cpm = i2c_get_adapdata(dev_id);
+	i2c_reg = cpm->i2c_reg;
+
+	/* Clear interrupt. */
+	i = in_8(&i2c_reg->i2cer);
+	out_8(&i2c_reg->i2cer, i);
+
+	dev_dbg(&adap->dev, "Interrupt: %x\n", i);
+
+	wake_up_interruptible(&cpm->i2c_wait);
+
+	return i ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void cpm_reset_i2c_params(struct cpm_i2c *cpm)
+{
+	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+
+	/* Set up the I2C parameters in the parameter ram. */
+	out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE);
+	out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+	if (cpm->version == 1) {
+		out_8(&i2c_ram->tfcr, I2C_EB);
+		out_8(&i2c_ram->rfcr, I2C_EB);
+	} else {
+		out_8(&i2c_ram->tfcr, I2C_EB_CPM2);
+		out_8(&i2c_ram->rfcr, I2C_EB_CPM2);
+	}
+
+	out_be16(&i2c_ram->mrblr, CPM_MAX_READ);
+
+	out_be32(&i2c_ram->rstate, 0);
+	out_be32(&i2c_ram->rdp, 0);
+	out_be16(&i2c_ram->rbptr, 0);
+	out_be16(&i2c_ram->rbc, 0);
+	out_be32(&i2c_ram->rxtmp, 0);
+	out_be32(&i2c_ram->tstate, 0);
+	out_be32(&i2c_ram->tdp, 0);
+	out_be16(&i2c_ram->tbptr, 0);
+	out_be16(&i2c_ram->tbc, 0);
+	out_be32(&i2c_ram->txtmp, 0);
+}
+
+static void cpm_i2c_force_close(struct i2c_adapter *adap)
+{
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+
+	dev_dbg(&adap->dev, "cpm_i2c_force_close()\n");
+
+	cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD);
+
+	out_8(&i2c_reg->i2cmr, 0x00);	/* Disable all interrupts */
+	out_8(&i2c_reg->i2cer, 0xff);
+}
+
+static void cpm_i2c_parse_message(struct i2c_adapter *adap,
+	struct i2c_msg *pmsg, int num, int tx, int rx)
+{
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	u_char addr;
+	u_char *tb;
+	u_char *rb;
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+	tbdf = cpm->tbase + tx;
+	rbdf = cpm->rbase + rx;
+
+	addr = pmsg->addr << 1;
+	if (pmsg->flags & I2C_M_RD)
+		addr |= 1;
+
+	tb = cpm->txbuf[tx];
+	rb = cpm->rxbuf[rx];
+
+	/* Align read buffer */
+	rb = (u_char *) (((ulong) rb + 1) & ~1);
+
+	tb[0] = addr;		/* Device address byte w/rw flag */
+
+	out_be16(&tbdf->cbd_datlen, pmsg->len + 1);
+	out_be16(&tbdf->cbd_sc, 0);
+
+	if (!(pmsg->flags & I2C_M_NOSTART))
+		setbits16(&tbdf->cbd_sc, BD_I2C_START);
+
+	if (tx + 1 == num)
+		setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP);
+
+	if (pmsg->flags & I2C_M_RD) {
+		/*
+		 * To read, we need an empty buffer of the proper length.
+		 * All that is used is the first byte for address, the remainder
+		 * is just used for timing (and doesn't really have to exist).
+		 */
+
+		dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr);
+
+		out_be16(&rbdf->cbd_datlen, 0);
+		out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
+
+		if (rx + 1 == CPM_MAXBD)
+			setbits16(&rbdf->cbd_sc, BD_SC_WRAP);
+
+		eieio();
+		setbits16(&tbdf->cbd_sc, BD_SC_READY);
+	} else {
+		dev_dbg(&adap->dev, "cpm_i2c_write(abyte=0x%x)\n", addr);
+
+		memcpy(tb+1, pmsg->buf, pmsg->len);
+
+		eieio();
+		setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT);
+	}
+}
+
+static int cpm_i2c_check_message(struct i2c_adapter *adap,
+	struct i2c_msg *pmsg, int tx, int rx)
+{
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	u_char *tb;
+	u_char *rb;
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+
+	tbdf = cpm->tbase + tx;
+	rbdf = cpm->rbase + rx;
+
+	tb = cpm->txbuf[tx];
+	rb = cpm->rxbuf[rx];
+
+	/* Align read buffer */
+	rb = (u_char *) (((uint) rb + 1) & ~1);
+
+	eieio();
+	if (pmsg->flags & I2C_M_RD) {
+		dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n",
+			in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc));
+
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+			dev_dbg(&adap->dev, "I2C read; No ack\n");
+			return -ENXIO;
+		}
+		if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) {
+			dev_err(&adap->dev,
+				"I2C read; complete but rbuf empty\n");
+			return -EREMOTEIO;
+		}
+		if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) {
+			dev_err(&adap->dev, "I2C read; Overrun\n");
+			return -EREMOTEIO;
+		}
+		memcpy(pmsg->buf, rb, pmsg->len);
+	} else {
+		dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx,
+			in_be16(&tbdf->cbd_sc));
+
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {
+			dev_dbg(&adap->dev, "I2C write; No ack\n");
+			return -ENXIO;
+		}
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) {
+			dev_err(&adap->dev, "I2C write; Underrun\n");
+			return -EIO;
+		}
+		if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+			dev_err(&adap->dev, "I2C write; Collision\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct cpm_i2c *cpm = i2c_get_adapdata(adap);
+	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;
+	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;
+	struct i2c_msg *pmsg;
+	int ret, i;
+	int tptr;
+	int rptr;
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+
+	if (num > CPM_MAXBD)
+		return -EINVAL;
+
+	/* Check if we have any oversized READ requests */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		if (pmsg->len >= CPM_MAX_READ)
+			return -EINVAL;
+	}
+
+	/* Reset to use first buffer */
+	out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));
+	out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));
+
+	tbdf = cpm->tbase;
+	rbdf = cpm->rbase;
+
+	tptr = 0;
+	rptr = 0;
+
+	while (tptr < num) {
+		pmsg = &msgs[tptr];
+		dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
+
+		cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr);
+		if (pmsg->flags & I2C_M_RD)
+			rptr++;
+		tptr++;
+	}
+	/* Start transfer now */
+	/* Enable RX/TX/Error interupts */
+	out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
+	out_8(&i2c_reg->i2cer, 0xff);	/* Clear interrupt status */
+	/* Chip bug, set enable here */
+	setbits8(&i2c_reg->i2mod, I2MOD_EN);	/* Enable */
+	/* Begin transmission */
+	setbits8(&i2c_reg->i2com, I2COM_START);
+
+	tptr = 0;
+	rptr = 0;
+
+	while (tptr < num) {
+		/* Check for outstanding messages */
+		dev_dbg(&adap->dev, "test ready.\n");
+		pmsg = &msgs[tptr];
+		if (pmsg->flags & I2C_M_RD)
+			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
+				1 * HZ);
+		else
+			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+				!(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),
+				1 * HZ);
+		if (ret == 0) {
+			ret = -EREMOTEIO;
+			dev_err(&adap->dev, "I2C transfer: timeout\n");
+			goto out_err;
+		}
+		if (ret > 0) {
+			dev_dbg(&adap->dev, "ready.\n");
+			ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr);
+			tptr++;
+			if (pmsg->flags & I2C_M_RD)
+				rptr++;
+			if (ret)
+				goto out_err;
+		}
+	}
+#ifdef I2C_CHIP_ERRATA
+	/*
+	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+	 * Disabling I2C too early may cause too short stop condition
+	 */
+	udelay(4);
+	clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+	return (num);
+
+out_err:
+	cpm_i2c_force_close(adap);
+#ifdef I2C_CHIP_ERRATA
+	/*
+	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.
+	 */
+	clrbits8(&i2c_reg->i2mod, I2MOD_EN);
+#endif
+	return ret;
+}
+
+static u32 cpm_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static const struct i2c_algorithm cpm_i2c_algo = {
+	.master_xfer = cpm_i2c_xfer,
+	.functionality = cpm_i2c_func,
+};
+
+static const struct i2c_adapter cpm_ops = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-cpm",
+	.algo		= &cpm_i2c_algo,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+};
+
+static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
+{
+	struct of_device *ofdev = cpm->ofdev;
+	const u32 *data;
+	int len, ret, i;
+	void __iomem *i2c_base;
+	cbd_t __iomem *tbdf;
+	cbd_t __iomem *rbdf;
+	unsigned char brg;
+
+	dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n");
+
+	init_waitqueue_head(&cpm->i2c_wait);
+
+	cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);
+	if (cpm->irq == NO_IRQ)
+		return -EINVAL;
+
+	/* Install interrupt handler. */
+	ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c",
+			  &cpm->adap);
+	if (ret)
+		return ret;
+
+	/* I2C parameter RAM */
+	i2c_base = of_iomap(ofdev->node, 1);
+	if (i2c_base == NULL) {
+		ret = -EINVAL;
+		goto out_irq;
+	}
+
+	if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) {
+
+		/* Check for and use a microcode relocation patch. */
+		cpm->i2c_ram = i2c_base;
+		cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase);
+
+		/*
+		 * Maybe should use cpm_muram_alloc instead of hardcoding
+		 * this in micropatch.c
+		 */
+		if (cpm->i2c_addr) {
+			cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+			iounmap(i2c_base);
+		}
+
+		cpm->version = 1;
+
+	} else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) {
+		cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);
+		cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);
+		out_be16(i2c_base, cpm->i2c_addr);
+		iounmap(i2c_base);
+
+		cpm->version = 2;
+
+	} else {
+		iounmap(i2c_base);
+		ret = -EINVAL;
+		goto out_irq;
+	}
+
+	/* I2C control/status registers */
+	cpm->i2c_reg = of_iomap(ofdev->node, 0);
+	if (cpm->i2c_reg == NULL) {
+		ret = -EINVAL;
+		goto out_ram;
+	}
+
+	data = of_get_property(ofdev->node, "fsl,cpm-command", &len);
+	if (!data || len != 4) {
+		ret = -EINVAL;
+		goto out_reg;
+	}
+	cpm->cp_command = *data;
+
+	data = of_get_property(ofdev->node, "linux,i2c-class", &len);
+	if (data && len == 4)
+		cpm->adap.class = *data;
+
+	data = of_get_property(ofdev->node, "clock-frequency", &len);
+	if (data && len == 4)
+		cpm->freq = *data;
+	else
+		cpm->freq = 60000; /* use 60kHz i2c clock by default */
+
+	/*
+	 * Allocate space for CPM_MAXBD transmit and receive buffer
+	 * descriptors in the DP ram.
+	 */
+	cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8);
+	if (!cpm->dp_addr) {
+		ret = -ENOMEM;
+		goto out_reg;
+	}
+
+	cpm->tbase = cpm_muram_addr(cpm->dp_addr);
+	cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD);
+
+	/* Allocate TX and RX buffers */
+
+	tbdf = cpm->tbase;
+	rbdf = cpm->rbase;
+
+	for (i = 0; i < CPM_MAXBD; i++) {
+		cpm->rxbuf[i] = dma_alloc_coherent(
+			NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+		if (!cpm->rxbuf[i]) {
+			ret = -ENOMEM;
+			goto out_muram;
+		}
+		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
+
+		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
+			NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+		if (!cpm->txbuf[i]) {
+			ret = -ENOMEM;
+			goto out_muram;
+		}
+		out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]);
+	}
+
+	/* Initialize Tx/Rx parameters. */
+
+	cpm_reset_i2c_params(cpm);
+
+	dev_dbg(&cpm->ofdev->dev, "i2c_ram 0x%p, i2c_addr 0x%04x, freq %d\n",
+		cpm->i2c_ram, cpm->i2c_addr, cpm->freq);
+	dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n",
+		(u8 __iomem *)cpm->tbase - DPRAM_BASE,
+		(u8 __iomem *)cpm->rbase - DPRAM_BASE);
+
+	cpm_command(cpm->cp_command, CPM_CR_INIT_TRX);
+
+	/*
+	 * Select an invalid address. Just make sure we don't use loopback mode
+	 */
+	out_8(&cpm->i2c_reg->i2add, 0x7f << 1);
+
+	/*
+	 * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the
+	 * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get
+	 * the actual i2c bus frequency.
+	 */
+	brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3;
+	out_8(&cpm->i2c_reg->i2brg, brg);
+
+	out_8(&cpm->i2c_reg->i2mod, 0x00);
+	out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);	/* Master mode */
+
+	/* Disable interrupts. */
+	out_8(&cpm->i2c_reg->i2cmr, 0);
+	out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+	return 0;
+
+out_muram:
+	for (i = 0; i < CPM_MAXBD; i++) {
+		if (cpm->rxbuf[i])
+			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+				cpm->rxbuf[i], cpm->rxdma[i]);
+		if (cpm->txbuf[i])
+			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+				cpm->txbuf[i], cpm->txdma[i]);
+	}
+	cpm_muram_free(cpm->dp_addr);
+out_reg:
+	iounmap(cpm->i2c_reg);
+out_ram:
+	if ((cpm->version == 1) && (!cpm->i2c_addr))
+		iounmap(cpm->i2c_ram);
+	if (cpm->version == 2)
+		cpm_muram_free(cpm->i2c_addr);
+out_irq:
+	free_irq(cpm->irq, &cpm->adap);
+	return ret;
+}
+
+static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
+{
+	int i;
+
+	/* Shut down I2C. */
+	clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN);
+
+	/* Disable interrupts */
+	out_8(&cpm->i2c_reg->i2cmr, 0);
+	out_8(&cpm->i2c_reg->i2cer, 0xff);
+
+	free_irq(cpm->irq, &cpm->adap);
+
+	/* Free all memory */
+	for (i = 0; i < CPM_MAXBD; i++) {
+		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			cpm->rxbuf[i], cpm->rxdma[i]);
+		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			cpm->txbuf[i], cpm->txdma[i]);
+	}
+
+	cpm_muram_free(cpm->dp_addr);
+	iounmap(cpm->i2c_reg);
+
+	if ((cpm->version == 1) && (!cpm->i2c_addr))
+		iounmap(cpm->i2c_ram);
+	if (cpm->version == 2)
+		cpm_muram_free(cpm->i2c_addr);
+}
+
+static int __devinit cpm_i2c_probe(struct of_device *ofdev,
+			 const struct of_device_id *match)
+{
+	int result, len;
+	struct cpm_i2c *cpm;
+	const u32 *data;
+
+	cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL);
+	if (!cpm)
+		return -ENOMEM;
+
+	cpm->ofdev = ofdev;
+
+	dev_set_drvdata(&ofdev->dev, cpm);
+
+	cpm->adap = cpm_ops;
+	i2c_set_adapdata(&cpm->adap, cpm);
+	cpm->adap.dev.parent = &ofdev->dev;
+
+	result = cpm_i2c_setup(cpm);
+	if (result) {
+		dev_err(&ofdev->dev, "Unable to init hardware\n");
+		goto out_free;
+	}
+
+	/* register new adapter to i2c module... */
+
+	data = of_get_property(ofdev->node, "linux,i2c-index", &len);
+	if (data && len == 4) {
+		cpm->adap.nr = *data;
+		result = i2c_add_numbered_adapter(&cpm->adap);
+	} else
+		result = i2c_add_adapter(&cpm->adap);
+
+	if (result < 0) {
+		dev_err(&ofdev->dev, "Unable to register with I2C\n");
+		goto out_shut;
+	}
+
+	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
+		cpm->adap.name);
+
+	/*
+	 * register OF I2C devices
+	 */
+	of_register_i2c_devices(&cpm->adap, ofdev->node);
+
+	return 0;
+out_shut:
+	cpm_i2c_shutdown(cpm);
+out_free:
+	dev_set_drvdata(&ofdev->dev, NULL);
+	kfree(cpm);
+
+	return result;
+}
+
+static int __devexit cpm_i2c_remove(struct of_device *ofdev)
+{
+	struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
+
+	i2c_del_adapter(&cpm->adap);
+
+	cpm_i2c_shutdown(cpm);
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+	kfree(cpm);
+
+	return 0;
+}
+
+static const struct of_device_id cpm_i2c_match[] = {
+	{
+		.compatible = "fsl,cpm1-i2c",
+	},
+	{
+		.compatible = "fsl,cpm2-i2c",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, cpm_i2c_match);
+
+static struct of_platform_driver cpm_i2c_driver = {
+	.match_table	= cpm_i2c_match,
+	.probe		= cpm_i2c_probe,
+	.remove		= __devexit_p(cpm_i2c_remove),
+	.driver		= {
+		.name	= "fsl-i2c-cpm",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init cpm_i2c_init(void)
+{
+	return of_register_platform_driver(&cpm_i2c_driver);
+}
+
+static void __exit cpm_i2c_exit(void)
+{
+	of_unregister_platform_driver(&cpm_i2c_driver);
+}
+
+module_init(cpm_i2c_init);
+module_exit(cpm_i2c_exit);
+
+MODULE_AUTHOR("Jochen Friedrich <jochen@scram.de>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 7ecbfc4..af3846e 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -85,6 +85,7 @@
 #define DAVINCI_I2C_MDR_MST	(1 << 10)
 #define DAVINCI_I2C_MDR_TRX	(1 << 9)
 #define DAVINCI_I2C_MDR_XA	(1 << 8)
+#define DAVINCI_I2C_MDR_RM	(1 << 7)
 #define DAVINCI_I2C_MDR_IRS	(1 << 5)
 
 #define DAVINCI_I2C_IMR_AAS	(1 << 6)
@@ -112,6 +113,7 @@ struct davinci_i2c_dev {
 	u8			*buf;
 	size_t			buf_len;
 	int			irq;
+	u8			terminate;
 	struct i2c_adapter	adapter;
 };
 
@@ -142,6 +144,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
 	u16 psc;
 	u32 clk;
+	u32 d;
 	u32 clkh;
 	u32 clkl;
 	u32 input_clock = clk_get_rate(dev->clk);
@@ -171,23 +174,29 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	 *       if PSC > 1 , d = 5
 	 */
 
-	psc = 26; /* To get 1MHz clock */
+	/* get minimum of 7 MHz clock, but max of 12 MHz */
+	psc = (input_clock / 7000000) - 1;
+	if ((input_clock / (psc + 1)) > 12000000)
+		psc++;	/* better to run under spec than over */
+	d = (psc >= 2) ? 5 : 7 - psc;
 
-	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - 10;
-	clkh = (50 * clk) / 100;
+	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - (d << 1);
+	clkh = clk >> 1;
 	clkl = clk - clkh;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
 
-	dev_dbg(dev->dev, "CLK  = %d\n", clk);
+	dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
 	dev_dbg(dev->dev, "PSC  = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
 	dev_dbg(dev->dev, "CLKL = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
 	dev_dbg(dev->dev, "CLKH = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
+	dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
+		pdata->bus_freq, pdata->bus_delay);
 
 	/* Take the I2C module out of reset: */
 	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
@@ -233,7 +242,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
 	struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
 	u32 flag;
-	u32 stat;
 	u16 w;
 	int r;
 
@@ -254,12 +262,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
 
-	init_completion(&dev->cmd_complete);
+	INIT_COMPLETION(dev->cmd_complete);
 	dev->cmd_err = 0;
 
-	/* Clear any pending interrupts by reading the IVR */
-	stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG);
-
 	/* Take I2C out of reset, configure it as master and set the
 	 * start bit */
 	flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
@@ -280,20 +285,34 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
 
+	dev->terminate = 0;
 	/* write the data into mode register */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
 	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 						      DAVINCI_I2C_TIMEOUT);
-	dev->buf_len = 0;
-	if (r < 0)
-		return r;
-
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		i2c_davinci_init(dev);
+		dev->buf_len = 0;
 		return -ETIMEDOUT;
 	}
+	if (dev->buf_len) {
+		/* This should be 0 if all bytes were transferred
+		 * or dev->cmd_err denotes an error.
+		 * A signal may have aborted the transfer.
+		 */
+		if (r >= 0) {
+			dev_err(dev->dev, "abnormal termination buf_len=%i\n",
+				dev->buf_len);
+			r = -EREMOTEIO;
+		}
+		dev->terminate = 1;
+		wmb();
+		dev->buf_len = 0;
+	}
+	if (r < 0)
+		return r;
 
 	/* no error */
 	if (likely(!dev->cmd_err))
@@ -338,12 +357,11 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	for (i = 0; i < num; i++) {
 		ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+		dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
+			ret);
 		if (ret < 0)
 			return ret;
 	}
-
-	dev_dbg(dev->dev, "%s:%d ret: %d\n", __func__, __LINE__, ret);
-
 	return num;
 }
 
@@ -352,6 +370,27 @@ static u32 i2c_davinci_func(struct i2c_adapter *adap)
 	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 }
 
+static void terminate_read(struct davinci_i2c_dev *dev)
+{
+	u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	w |= DAVINCI_I2C_MDR_NACK;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+	/* Throw away data */
+	davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG);
+	if (!dev->terminate)
+		dev_err(dev->dev, "RDR IRQ while no data requested\n");
+}
+static void terminate_write(struct davinci_i2c_dev *dev)
+{
+	u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+	w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP;
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+	if (!dev->terminate)
+		dev_err(dev->dev, "TDR IRQ while no data to send\n");
+}
+
 /*
  * Interrupt service routine. This gets called whenever an I2C interrupt
  * occurs.
@@ -372,12 +411,15 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 
 		switch (stat) {
 		case DAVINCI_I2C_IVR_AL:
+			/* Arbitration lost, must retry */
 			dev->cmd_err |= DAVINCI_I2C_STR_AL;
+			dev->buf_len = 0;
 			complete(&dev->cmd_complete);
 			break;
 
 		case DAVINCI_I2C_IVR_NACK:
 			dev->cmd_err |= DAVINCI_I2C_STR_NACK;
+			dev->buf_len = 0;
 			complete(&dev->cmd_complete);
 			break;
 
@@ -399,9 +441,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 				davinci_i2c_write_reg(dev,
 					DAVINCI_I2C_STR_REG,
 					DAVINCI_I2C_IMR_RRDY);
-			} else
-				dev_err(dev->dev, "RDR IRQ while no "
-					"data requested\n");
+			} else {
+				/* signal can terminate transfer */
+				terminate_read(dev);
+			}
 			break;
 
 		case DAVINCI_I2C_IVR_XRDY:
@@ -418,9 +461,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 				davinci_i2c_write_reg(dev,
 						      DAVINCI_I2C_IMR_REG,
 						      w);
-			} else
-				dev_err(dev->dev, "TDR IRQ while no data to "
-					"send\n");
+			} else {
+				/* signal can terminate transfer */
+				terminate_write(dev);
+			}
 			break;
 
 		case DAVINCI_I2C_IVR_SCD:
@@ -475,6 +519,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
+	init_completion(&dev->cmd_complete);
 	dev->dev = get_device(&pdev->dev);
 	dev->irq = irq->start;
 	platform_set_drvdata(pdev, dev);
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index b7a9977..7f38c01 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -196,13 +196,11 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
 	.getown	    = pcf_isa_getown,
 	.getclock   = pcf_isa_getclock,
 	.waitforpin = pcf_isa_waitforpin,
-	.udelay	    = 10,
-	.timeout    = 100,
 };
 
 static struct i2c_adapter pcf_isa_ops = {
 	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
 	.name		= "i2c-elektor",
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 7c1b762..79b455a 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -140,7 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
 	adap->owner = THIS_MODULE;
 	snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
 	adap->algo_data = bit_data;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->dev.parent = &pdev->dev;
 
 	/*
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index f9972f9..1098f21 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -1,7 +1,4 @@
 /*
-    i2c-hydra.c - Part of lm_sensors,  Linux kernel modules
-                  for hardware monitoring
-
     i2c Support for the Apple `Hydra' Mac I/O
 
     Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index b0f771f..dc7ea32 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,10 +1,8 @@
 /*
-    i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
     <mdsxyz123@yahoo.com>
-    Copyright (C) 2007         Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2007, 2008   Jean Delvare <khali@linux-fr.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -64,6 +62,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 /* I801 SMBus address offsets */
@@ -121,6 +120,10 @@
 #define SMBHSTSTS_INTR		0x02
 #define SMBHSTSTS_HOST_BUSY	0x01
 
+#define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
+				 SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
+				 SMBHSTSTS_INTR)
+
 static unsigned long i801_smba;
 static unsigned char i801_original_hstcfg;
 static struct pci_driver i801_driver;
@@ -132,105 +135,137 @@ static struct pci_dev *I801_dev;
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
 static unsigned int i801_features;
 
-static int i801_transaction(int xact)
+/* Make sure the SMBus host is ready to start transmitting.
+   Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(void)
 {
-	int temp;
-	int result = 0;
-	int timeout = 0;
+	int status;
 
-	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
-		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
-		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
-		inb_p(SMBHSTDAT1));
-
-	/* Make sure the SMBus host is ready to start transmitting */
-	/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
-	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
-			temp);
-		outb_p(temp, SMBHSTSTS);
-		if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-			dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
-			return -1;
-		} else {
-			dev_dbg(&I801_dev->dev, "Successful!\n");
+	status = inb_p(SMBHSTSTS);
+	if (status & SMBHSTSTS_HOST_BUSY) {
+		dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
+		return -EBUSY;
+	}
+
+	status &= STATUS_FLAGS;
+	if (status) {
+		dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
+			status);
+		outb_p(status, SMBHSTSTS);
+		status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+		if (status) {
+			dev_err(&I801_dev->dev,
+				"Failed clearing status flags (%02x)\n",
+				status);
+			return -EBUSY;
 		}
 	}
 
-	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
-	 * INTREN, SMBSCMD are passed in xact */
-	outb_p(xact | I801_START, SMBHSTCNT);
+	return 0;
+}
 
-	/* We will always wait for a fraction of a second! */
-	do {
-		msleep(1);
-		temp = inb_p(SMBHSTSTS);
-	} while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+/* Convert the status register to an error code, and clear it. */
+static int i801_check_post(int status, int timeout)
+{
+	int result = 0;
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
-		dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
-		result = -1;
+	if (timeout) {
+		dev_err(&I801_dev->dev, "Transaction timeout\n");
 		/* try to stop the current command */
 		dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
 		outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
 		msleep(1);
 		outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
-	}
 
-	if (temp & SMBHSTSTS_FAILED) {
-		result = -1;
-		dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
+		/* Check if it worked */
+		status = inb_p(SMBHSTSTS);
+		if ((status & SMBHSTSTS_HOST_BUSY) ||
+		    !(status & SMBHSTSTS_FAILED))
+			dev_err(&I801_dev->dev,
+				"Failed terminating the transaction\n");
+		outb_p(STATUS_FLAGS, SMBHSTSTS);
+		return -ETIMEDOUT;
 	}
 
-	if (temp & SMBHSTSTS_BUS_ERR) {
-		result = -1;
-		dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
-			"until next hard reset. (sorry!)\n");
-		/* Clock stops and slave is stuck in mid-transmission */
+	if (status & SMBHSTSTS_FAILED) {
+		result = -EIO;
+		dev_err(&I801_dev->dev, "Transaction failed\n");
 	}
-
-	if (temp & SMBHSTSTS_DEV_ERR) {
-		result = -1;
-		dev_dbg(&I801_dev->dev, "Error: no response!\n");
+	if (status & SMBHSTSTS_DEV_ERR) {
+		result = -ENXIO;
+		dev_dbg(&I801_dev->dev, "No response\n");
+	}
+	if (status & SMBHSTSTS_BUS_ERR) {
+		result = -EAGAIN;
+		dev_dbg(&I801_dev->dev, "Lost arbitration\n");
 	}
 
-	if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
-		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
-
-	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
-			"(%02x)\n", temp);
+	if (result) {
+		/* Clear error flags */
+		outb_p(status & STATUS_FLAGS, SMBHSTSTS);
+		status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+		if (status) {
+			dev_warn(&I801_dev->dev, "Failed clearing status "
+				 "flags at end of transaction (%02x)\n",
+				 status);
+		}
 	}
-	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
-		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
-		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
-		inb_p(SMBHSTDAT1));
+
 	return result;
 }
 
+static int i801_transaction(int xact)
+{
+	int status;
+	int result;
+	int timeout = 0;
+
+	result = i801_check_pre();
+	if (result < 0)
+		return result;
+
+	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
+	 * INTREN, SMBSCMD are passed in xact */
+	outb_p(xact | I801_START, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		status = inb_p(SMBHSTSTS);
+	} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+
+	result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+	if (result < 0)
+		return result;
+
+	outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+	return 0;
+}
+
 /* wait for INTR bit as advised by Intel */
 static void i801_wait_hwpec(void)
 {
 	int timeout = 0;
-	int temp;
+	int status;
 
 	do {
 		msleep(1);
-		temp = inb_p(SMBHSTSTS);
-	} while ((!(temp & SMBHSTSTS_INTR))
+		status = inb_p(SMBHSTSTS);
+	} while ((!(status & SMBHSTSTS_INTR))
 		 && (timeout++ < MAX_TIMEOUT));
 
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
 	}
-	outb_p(temp, SMBHSTSTS);
+	outb_p(status, SMBHSTSTS);
 }
 
 static int i801_block_transaction_by_block(union i2c_smbus_data *data,
 					   char read_write, int hwpec)
 {
 	int i, len;
+	int status;
 
 	inb_p(SMBHSTCNT); /* reset the data buffer index */
 
@@ -242,14 +277,15 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data,
 			outb_p(data->block[i+1], SMBBLKDAT);
 	}
 
-	if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
-			     I801_PEC_EN * hwpec))
-		return -1;
+	status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+				  I801_PEC_EN * hwpec);
+	if (status)
+		return status;
 
 	if (read_write == I2C_SMBUS_READ) {
 		len = inb_p(SMBHSTDAT0);
 		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
-			return -1;
+			return -EPROTO;
 
 		data->block[0] = len;
 		for (i = 0; i < len; i++)
@@ -264,10 +300,13 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 {
 	int i, len;
 	int smbcmd;
-	int temp;
-	int result = 0;
+	int status;
+	int result;
 	int timeout;
-	unsigned char errmask;
+
+	result = i801_check_pre();
+	if (result < 0)
+		return result;
 
 	len = data->block[0];
 
@@ -291,36 +330,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 		}
 		outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
 
-		dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
-			"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
-			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
-			inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
-
-		/* Make sure the SMBus host is ready to start transmitting */
-		temp = inb_p(SMBHSTSTS);
-		if (i == 1) {
-			/* Erroneous conditions before transaction:
-			 * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
-			errmask = 0x9f;
-		} else {
-			/* Erroneous conditions during transaction:
-			 * Failed, Bus_Err, Dev_Err, Intr */
-			errmask = 0x1e;
-		}
-		if (temp & errmask) {
-			dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
-				"Resetting...\n", temp);
-			outb_p(temp, SMBHSTSTS);
-			if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
-				dev_err(&I801_dev->dev,
-					"Reset failed! (%02x)\n", temp);
-				return -1;
-			}
-			if (i != 1)
-				/* if die in middle of block transaction, fail */
-				return -1;
-		}
-
 		if (i == 1)
 			outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
 
@@ -328,41 +337,28 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 		timeout = 0;
 		do {
 			msleep(1);
-			temp = inb_p(SMBHSTSTS);
+			status = inb_p(SMBHSTSTS);
 		}
-		while ((!(temp & SMBHSTSTS_BYTE_DONE))
+		while ((!(status & SMBHSTSTS_BYTE_DONE))
 		       && (timeout++ < MAX_TIMEOUT));
 
-		/* If the SMBus is still busy, we give up */
-		if (timeout >= MAX_TIMEOUT) {
-			/* try to stop the current command */
-			dev_dbg(&I801_dev->dev, "Terminating the current "
-						"operation\n");
-			outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
-			msleep(1);
-			outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
-				SMBHSTCNT);
-			result = -1;
-			dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
-		}
-
-		if (temp & SMBHSTSTS_FAILED) {
-			result = -1;
-			dev_dbg(&I801_dev->dev,
-				"Error: Failed bus transaction\n");
-		} else if (temp & SMBHSTSTS_BUS_ERR) {
-			result = -1;
-			dev_err(&I801_dev->dev, "Bus collision!\n");
-		} else if (temp & SMBHSTSTS_DEV_ERR) {
-			result = -1;
-			dev_dbg(&I801_dev->dev, "Error: no response!\n");
-		}
+		result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+		if (result < 0)
+			return result;
 
 		if (i == 1 && read_write == I2C_SMBUS_READ
 		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
 			len = inb_p(SMBHSTDAT0);
-			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
-				return -1;
+			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&I801_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					len);
+				/* Recover */
+				while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
+					outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
+				outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+				return -EPROTO;
+			}
 			data->block[0] = len;
 		}
 
@@ -371,30 +367,19 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 			data->block[i] = inb_p(SMBBLKDAT);
 		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
 			outb_p(data->block[i+1], SMBBLKDAT);
-		if ((temp & 0x9e) != 0x00)
-			outb_p(temp, SMBHSTSTS);  /* signals SMBBLKDAT ready */
-
-		if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
-			dev_dbg(&I801_dev->dev,
-				"Bad status (%02x) at end of transaction\n",
-				temp);
-		}
-		dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
-			"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
-			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
-			inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
 
-		if (result < 0)
-			return result;
+		/* signals SMBBLKDAT ready */
+		outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
 	}
-	return result;
+
+	return 0;
 }
 
 static int i801_set_block_buffer_mode(void)
 {
 	outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
 	if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
-		return -1;
+		return -EIO;
 	return 0;
 }
 
@@ -414,7 +399,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		} else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
 			dev_err(&I801_dev->dev,
 				"I2C block read is unsupported!\n");
-			return -1;
+			return -EOPNOTSUPP;
 		}
 	}
 
@@ -449,7 +434,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		       unsigned short flags, char read_write, u8 command,
 		       int size, union i2c_smbus_data * data)
@@ -511,10 +496,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 			outb_p(command, SMBHSTCMD);
 		block = 1;
 		break;
-	case I2C_SMBUS_PROC_CALL:
 	default:
 		dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
-		return -1;
+		return -EOPNOTSUPP;
 	}
 
 	if (hwpec)	/* enable/disable hardware PEC */
@@ -537,7 +521,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 	if(block)
 		return ret;
 	if(ret)
-		return -1;
+		return ret;
 	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
 		return 0;
 
@@ -572,7 +556,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_I801,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
@@ -639,6 +623,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 		goto exit;
 	}
 
+	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+	if (err)
+		goto exit;
+
 	err = pci_request_region(dev, SMBBAR, i801_driver.name);
 	if (err) {
 		dev_err(&dev->dev, "Failed to request SMBus region "
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
deleted file mode 100644
index 42e8d94..0000000
--- a/drivers/i2c/busses/i2c-i810.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
-    i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
-    Copyright (c) 1998, 1999, 2000  Frodo Looijaard <frodol@dds.nl>,
-    Philip Edelbrock <phil@netroedge.com>,
-    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
-    Mark D. Studebaker <mdsxyz123@yahoo.com>
-    
-    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
-    Simon Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/*
-   This interfaces to the I810/I815 to provide access to
-   the DDC Bus and the I2C Bus.
-
-   SUPPORTED DEVICES	PCI ID
-   i810AA		7121           
-   i810AB		7123           
-   i810E		7125           
-   i815			1132           
-   i845G		2562
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* GPIO register locations */
-#define I810_IOCONTROL_OFFSET	0x5000
-#define I810_HVSYNC		0x00	/* not used */
-#define I810_GPIOA		0x10
-#define I810_GPIOB		0x14
-
-/* bit locations in the registers */
-#define SCL_DIR_MASK		0x0001
-#define SCL_DIR			0x0002
-#define SCL_VAL_MASK		0x0004
-#define SCL_VAL_OUT		0x0008
-#define SCL_VAL_IN		0x0010
-#define SDA_DIR_MASK		0x0100
-#define SDA_DIR			0x0200
-#define SDA_VAL_MASK		0x0400
-#define SDA_VAL_OUT		0x0800
-#define SDA_VAL_IN		0x1000
-
-/* initialization states */
-#define INIT1			0x1
-#define INIT2			0x2
-#define INIT3			0x4
-
-/* delays */
-#define CYCLE_DELAY		10
-#define TIMEOUT			(HZ / 2)
-
-static void __iomem *ioaddr;
-
-/* The i810 GPIO registers have individual masks for each bit
-   so we never have to read before writing. Nice. */
-
-static void bit_i810i2c_setscl(void *data, int val)
-{
-	writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
-	     ioaddr + I810_GPIOB);
-	readl(ioaddr + I810_GPIOB);	/* flush posted write */
-}
-
-static void bit_i810i2c_setsda(void *data, int val)
-{
- 	writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
-	     ioaddr + I810_GPIOB);
-	readl(ioaddr + I810_GPIOB);	/* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins could always remain outputs.
-   However, some chip versions don't latch the inputs unless they
-   are set as inputs.
-   We rely on the i2c-algo-bit routines to set the pins high before
-   reading the input from other chips. Following guidance in the 815
-   prog. ref. guide, we do a "dummy write" of 0 to the register before
-   reading which forces the input value to be latched. We presume this
-   applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
-   i2c_algo_bit bit_test=1 to pass. */
-
-static int bit_i810i2c_getscl(void *data)
-{
-	writel(SCL_DIR_MASK, ioaddr + I810_GPIOB);
-	writel(0, ioaddr + I810_GPIOB);
-	return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN));
-}
-
-static int bit_i810i2c_getsda(void *data)
-{
-	writel(SDA_DIR_MASK, ioaddr + I810_GPIOB);
-	writel(0, ioaddr + I810_GPIOB);
-	return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN));
-}
-
-static void bit_i810ddc_setscl(void *data, int val)
-{
-	writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
-	     ioaddr + I810_GPIOA);
-	readl(ioaddr + I810_GPIOA);	/* flush posted write */
-}
-
-static void bit_i810ddc_setsda(void *data, int val)
-{
- 	writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
-	     ioaddr + I810_GPIOA);
-	readl(ioaddr + I810_GPIOA);	/* flush posted write */
-}
-
-static int bit_i810ddc_getscl(void *data)
-{
-	writel(SCL_DIR_MASK, ioaddr + I810_GPIOA);
-	writel(0, ioaddr + I810_GPIOA);
-	return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN));
-}
-
-static int bit_i810ddc_getsda(void *data)
-{
-	writel(SDA_DIR_MASK, ioaddr + I810_GPIOA);
-	writel(0, ioaddr + I810_GPIOA);
-	return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN));
-}
-
-static int config_i810(struct pci_dev *dev)
-{
-	unsigned long cadr;
-
-	/* map I810 memory */
-	cadr = dev->resource[1].start;
-	cadr += I810_IOCONTROL_OFFSET;
-	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
-	ioaddr = ioremap_nocache(cadr, 0x1000);
-	if (ioaddr) {
-		bit_i810i2c_setscl(NULL, 1);
-		bit_i810i2c_setsda(NULL, 1);
-		bit_i810ddc_setscl(NULL, 1);
-		bit_i810ddc_setsda(NULL, 1);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static struct i2c_algo_bit_data i810_i2c_bit_data = {
-	.setsda		= bit_i810i2c_setsda,
-	.setscl		= bit_i810i2c_setscl,
-	.getsda		= bit_i810i2c_getsda,
-	.getscl		= bit_i810i2c_getscl,
-	.udelay		= CYCLE_DELAY,
-	.timeout	= TIMEOUT,
-};
-
-static struct i2c_adapter i810_i2c_adapter = {
-	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_I810,
-	.name		= "I810/I815 I2C Adapter",
-	.algo_data	= &i810_i2c_bit_data,
-};
-
-static struct i2c_algo_bit_data i810_ddc_bit_data = {
-	.setsda		= bit_i810ddc_setsda,
-	.setscl		= bit_i810ddc_setscl,
-	.getsda		= bit_i810ddc_getsda,
-	.getscl		= bit_i810ddc_getscl,
-	.udelay		= CYCLE_DELAY,
-	.timeout	= TIMEOUT,
-};
-
-static struct i2c_adapter i810_ddc_adapter = {
-	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_I810,
-	.name		= "I810/I815 DDC Adapter",
-	.algo_data	= &i810_ddc_bit_data,
-};
-
-static struct pci_device_id i810_ids[] __devinitdata = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) },
-	{ 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, i810_ids);
-
-static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	int retval;
-
-	retval = config_i810(dev);
-	if (retval)
-		return retval;
-	dev_info(&dev->dev, "i810/i815 i2c device found.\n");
-
-	/* set up the sysfs linkage to our parent device */
-	i810_i2c_adapter.dev.parent = &dev->dev;
-	i810_ddc_adapter.dev.parent = &dev->dev;
-
-	retval = i2c_bit_add_bus(&i810_i2c_adapter);
-	if (retval)
-		return retval;
-	retval = i2c_bit_add_bus(&i810_ddc_adapter);
-	if (retval)
-		i2c_del_adapter(&i810_i2c_adapter);
-	return retval;
-}
-
-static void __devexit i810_remove(struct pci_dev *dev)
-{
-	i2c_del_adapter(&i810_ddc_adapter);
-	i2c_del_adapter(&i810_i2c_adapter);
-	iounmap(ioaddr);
-}
-
-static struct pci_driver i810_driver = {
-	.name		= "i810_smbus",
-	.id_table	= i810_ids,
-	.probe		= i810_probe,
-	.remove		= __devexit_p(i810_remove),
-};
-
-static int __init i2c_i810_init(void)
-{
-	return pci_register_driver(&i810_driver);
-}
-
-static void __exit i2c_i810_exit(void)
-{
-	pci_unregister_driver(&i810_driver);
-}
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
-		"Philip Edelbrock <phil@netroedge.com>, "
-		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
-		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_i810_init);
-module_exit(i2c_i810_exit);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 85dbf34..651f2f1 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -42,13 +42,8 @@
 #include <asm/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-
-#ifdef CONFIG_IBM_OCP
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#else
 #include <linux/of_platform.h>
-#endif
+#include <linux/of_i2c.h>
 
 #include "i2c-ibm_iic.h"
 
@@ -665,180 +660,6 @@ static inline u8 iic_clckdiv(unsigned int opb)
 	return (u8)((opb + 9) / 10 - 1);
 }
 
-#ifdef CONFIG_IBM_OCP
-/*
- * Register single IIC interface
- */
-static int __devinit iic_probe(struct ocp_device *ocp){
-
-	struct ibm_iic_private* dev;
-	struct i2c_adapter* adap;
-	struct ocp_func_iic_data* iic_data = ocp->def->additions;
-	int ret;
-
-	if (!iic_data)
-		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
-			ocp->def->index);
-
-	if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
-		printk(KERN_ERR "ibm-iic%d: failed to allocate device data\n",
-			ocp->def->index);
-		return -ENOMEM;
-	}
-
-	dev->idx = ocp->def->index;
-	ocp_set_drvdata(ocp, dev);
-
-	if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
-				"ibm_iic")) {
-		ret = -EBUSY;
-		goto fail1;
-	}
-
-	if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
-		printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n",
-			dev->idx);
-		ret = -ENXIO;
-		goto fail2;
-	}
-
-	init_waitqueue_head(&dev->wq);
-
-	dev->irq = iic_force_poll ? -1 : ocp->def->irq;
-	if (dev->irq >= 0){
-		/* Disable interrupts until we finish initialization,
-		   assumes level-sensitive IRQ setup...
-		 */
-		iic_interrupt_mode(dev, 0);
-		if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
-			printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
-				dev->idx, dev->irq);
-			/* Fallback to the polling mode */
-			dev->irq = -1;
-		}
-	}
-
-	if (dev->irq < 0)
-		printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
-			dev->idx);
-
-	/* Board specific settings */
-	dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
-
-	/* clckdiv is the same for *all* IIC interfaces,
-	 * but I'd rather make a copy than introduce another global. --ebs
-	 */
-	dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
-	DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
-
-	/* Initialize IIC interface */
-	iic_dev_init(dev);
-
-	/* Register it with i2c layer */
-	adap = &dev->adap;
-	adap->dev.parent = &ocp->dev;
-	strcpy(adap->name, "IBM IIC");
-	i2c_set_adapdata(adap, dev);
-	adap->id = I2C_HW_OCP;
-	adap->class = I2C_CLASS_HWMON;
-	adap->algo = &iic_algo;
-	adap->client_register = NULL;
-	adap->client_unregister = NULL;
-	adap->timeout = 1;
-
-	/*
-	 * If "dev->idx" is negative we consider it as zero.
-	 * The reason to do so is to avoid sysfs names that only make
-	 * sense when there are multiple adapters.
-	 */
-	adap->nr = dev->idx >= 0 ? dev->idx : 0;
-
-	if ((ret = i2c_add_numbered_adapter(adap)) < 0) {
-		printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n",
-			dev->idx);
-		goto fail;
-	}
-
-	printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
-		dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
-
-	return 0;
-
-fail:
-	if (dev->irq >= 0){
-		iic_interrupt_mode(dev, 0);
-		free_irq(dev->irq, dev);
-	}
-
-	iounmap(dev->vaddr);
-fail2:
-	release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
-fail1:
-	ocp_set_drvdata(ocp, NULL);
-	kfree(dev);
-	return ret;
-}
-
-/*
- * Cleanup initialized IIC interface
- */
-static void __devexit iic_remove(struct ocp_device *ocp)
-{
-	struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp);
-	BUG_ON(dev == NULL);
-	if (i2c_del_adapter(&dev->adap)){
-		printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n",
-			dev->idx);
-		/* That's *very* bad, just shutdown IRQ ... */
-		if (dev->irq >= 0){
-		    iic_interrupt_mode(dev, 0);
-		    free_irq(dev->irq, dev);
-		    dev->irq = -1;
-		}
-	} else {
-		if (dev->irq >= 0){
-		    iic_interrupt_mode(dev, 0);
-		    free_irq(dev->irq, dev);
-		}
-		iounmap(dev->vaddr);
-		release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
-		kfree(dev);
-	}
-}
-
-static struct ocp_device_id ibm_iic_ids[] __devinitdata =
-{
-	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
-	{ .vendor = OCP_VENDOR_INVALID }
-};
-
-MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
-
-static struct ocp_driver ibm_iic_driver =
-{
-	.name 		= "iic",
-	.id_table	= ibm_iic_ids,
-	.probe		= iic_probe,
-	.remove		= __devexit_p(iic_remove),
-#if defined(CONFIG_PM)
-	.suspend	= NULL,
-	.resume		= NULL,
-#endif
-};
-
-static int __init iic_init(void)
-{
-	printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
-	return ocp_register_driver(&ibm_iic_driver);
-}
-
-static void __exit iic_exit(void)
-{
-	ocp_unregister_driver(&ibm_iic_driver);
-}
-
-#else  /* !CONFIG_IBM_OCP */
-
 static int __devinit iic_request_irq(struct of_device *ofdev,
 				     struct ibm_iic_private *dev)
 {
@@ -876,7 +697,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	struct device_node *np = ofdev->node;
 	struct ibm_iic_private *dev;
 	struct i2c_adapter *adap;
-	const u32 *indexp, *freq;
+	const u32 *freq;
 	int ret;
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -887,14 +708,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
 
 	dev_set_drvdata(&ofdev->dev, dev);
 
-	indexp = of_get_property(np, "index", NULL);
-	if (!indexp) {
-		dev_err(&ofdev->dev, "no index specified\n");
-		ret = -EINVAL;
-		goto error_cleanup;
-	}
-	dev->idx = *indexp;
-
 	dev->vaddr = of_iomap(np, 0);
 	if (dev->vaddr == NULL) {
 		dev_err(&ofdev->dev, "failed to iomap device\n");
@@ -934,17 +747,19 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
 	adap->id = I2C_HW_OCP;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
 	adap->timeout = 1;
-	adap->nr = dev->idx;
 
-	ret = i2c_add_numbered_adapter(adap);
+	ret = i2c_add_adapter(adap);
 	if (ret  < 0) {
 		dev_err(&ofdev->dev, "failed to register i2c adapter\n");
 		goto error_cleanup;
 	}
 
+	/* Now register all the child nodes */
+	of_register_i2c_devices(adap, np);
+
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
@@ -987,11 +802,7 @@ static int __devexit iic_remove(struct of_device *ofdev)
 }
 
 static const struct of_device_id ibm_iic_match[] = {
-	{ .compatible = "ibm,iic-405ex", },
-	{ .compatible = "ibm,iic-405gp", },
-	{ .compatible = "ibm,iic-440gp", },
-	{ .compatible = "ibm,iic-440gpx", },
-	{ .compatible = "ibm,iic-440grx", },
+	{ .compatible = "ibm,iic", },
 	{}
 };
 
@@ -1011,7 +822,6 @@ static void __exit iic_exit(void)
 {
 	of_unregister_platform_driver(&ibm_iic_driver);
 }
-#endif /* CONFIG_IBM_OCP */
 
 module_init(iic_init);
 module_exit(iic_exit);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 39884e7..fc2714a 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -482,7 +482,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
 	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
-	new_adapter->class = I2C_CLASS_HWMON;
+	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	new_adapter->dev.parent = &pdev->dev;
 	new_adapter->nr = pdev->id;
 
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
new file mode 100644
index 0000000..b9c01aa
--- /dev/null
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -0,0 +1,339 @@
+/*
+    i2c-isch.c - Linux kernel driver for Intel SCH chipset SMBus
+    - Based on i2c-piix4.c
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+    - Intel SCH support
+    Copyright (c) 2007 - 2008 Jacob Jun Pan <jacob.jun.pan@intel.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License version 2 as
+    published by the Free Software Foundation.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports:
+	Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+/* SCH SMBus address offsets */
+#define SMBHSTCNT	(0 + sch_smba)
+#define SMBHSTSTS	(1 + sch_smba)
+#define SMBHSTADD	(4 + sch_smba) /* TSA */
+#define SMBHSTCMD	(5 + sch_smba)
+#define SMBHSTDAT0	(6 + sch_smba)
+#define SMBHSTDAT1	(7 + sch_smba)
+#define SMBBLKDAT	(0x20 + sch_smba)
+
+/* count for request_region */
+#define SMBIOSIZE	64
+
+/* PCI Address Constants */
+#define SMBBA_SCH	0x40
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+
+/* I2C constants */
+#define SCH_QUICK		0x00
+#define SCH_BYTE		0x01
+#define SCH_BYTE_DATA		0x02
+#define SCH_WORD_DATA		0x03
+#define SCH_BLOCK_DATA		0x05
+
+static unsigned short sch_smba;
+static struct pci_driver sch_driver;
+static struct i2c_adapter sch_adapter;
+
+/*
+ * Start the i2c transaction -- the i2c_access will prepare the transaction
+ * and this function will execute it.
+ * return 0 for success and others for failure.
+ */
+static int sch_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+		inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+		inb(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	temp = inb(SMBHSTSTS) & 0x0f;
+	if (temp) {
+		/* Can not be busy since we checked it in sch_access */
+		if (temp & 0x01) {
+			dev_dbg(&sch_adapter.dev, "Completion (%02x). "
+				"Clear...\n", temp);
+		}
+		if (temp & 0x06) {
+			dev_dbg(&sch_adapter.dev, "SMBus error (%02x). "
+				"Resetting...\n", temp);
+		}
+		outb(temp, SMBHSTSTS);
+		temp = inb(SMBHSTSTS) & 0x0f;
+		if (temp) {
+			dev_err(&sch_adapter.dev,
+				"SMBus is not ready: (%02x)\n", temp);
+			return -EAGAIN;
+		}
+	}
+
+	/* start the transaction by setting bit 4 */
+	outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT);
+
+	do {
+		msleep(1);
+		temp = inb(SMBHSTSTS) & 0x0f;
+	} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+	if (temp & 0x04) {
+		result = -EIO;
+		dev_dbg(&sch_adapter.dev, "Bus collision! SMBus may be "
+			"locked until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	} else if (temp & 0x02) {
+		result = -EIO;
+		dev_err(&sch_adapter.dev, "Error: no response!\n");
+	} else if (temp & 0x01) {
+		dev_dbg(&sch_adapter.dev, "Post complete!\n");
+		outb(temp, SMBHSTSTS);
+		temp = inb(SMBHSTSTS) & 0x07;
+		if (temp & 0x06) {
+			/* Completion clear failed */
+			dev_dbg(&sch_adapter.dev, "Failed reset at end of "
+				"transaction (%02x), Bus error!\n", temp);
+		}
+	} else {
+		result = -ENXIO;
+		dev_dbg(&sch_adapter.dev, "No such address.\n");
+	}
+	dev_dbg(&sch_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT),
+		inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0),
+		inb(SMBHSTDAT1));
+	return result;
+}
+
+/*
+ * This is the main access entry for i2c-sch access
+ * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
+ * (0 for read and 1 for write), size is i2c transaction type and data is the
+ * union of transaction for data to be transfered or data read from bus.
+ * return 0 for success and others for failure.
+ */
+static s32 sch_access(struct i2c_adapter *adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data *data)
+{
+	int i, len, temp, rc;
+
+	/* Make sure the SMBus host is not busy */
+	temp = inb(SMBHSTSTS) & 0x0f;
+	if (temp & 0x08) {
+		dev_dbg(&sch_adapter.dev, "SMBus busy (%02x)\n", temp);
+		return -EAGAIN;
+	}
+	dev_dbg(&sch_adapter.dev, "access size: %d %s\n", size,
+		(read_write)?"READ":"WRITE");
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		size = SCH_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb(command, SMBHSTCMD);
+		size = SCH_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb(data->byte, SMBHSTDAT0);
+		size = SCH_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb(data->word & 0xff, SMBHSTDAT0);
+			outb((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = SCH_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb((addr << 1) | read_write, SMBHSTADD);
+		outb(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			outb(len, SMBHSTDAT0);
+			for (i = 1; i <= len; i++)
+				outb(data->block[i], SMBBLKDAT+i-1);
+		}
+		size = SCH_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+	dev_dbg(&sch_adapter.dev, "write size %d to 0x%04x\n", size, SMBHSTCNT);
+	outb((inb(SMBHSTCNT) & 0xb0) | (size & 0x7), SMBHSTCNT);
+
+	rc = sch_transaction();
+	if (rc)	/* Error in transaction */
+		return rc;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == SCH_QUICK))
+		return 0;
+
+	switch (size) {
+	case SCH_BYTE:
+	case SCH_BYTE_DATA:
+		data->byte = inb(SMBHSTDAT0);
+		break;
+	case SCH_WORD_DATA:
+		data->word = inb(SMBHSTDAT0) + (inb(SMBHSTDAT1) << 8);
+		break;
+	case SCH_BLOCK_DATA:
+		data->block[0] = inb(SMBHSTDAT0);
+		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb(SMBBLKDAT+i-1);
+		break;
+	}
+	return 0;
+}
+
+static u32 sch_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sch_access,
+	.functionality	= sch_func,
+};
+
+static struct i2c_adapter sch_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static struct pci_device_id sch_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sch_ids);
+
+static int __devinit sch_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	int retval;
+	unsigned int smba;
+
+	pci_read_config_dword(dev, SMBBA_SCH, &smba);
+	if (!(smba & (1 << 31))) {
+		dev_err(&dev->dev, "SMBus I/O space disabled!\n");
+		return -ENODEV;
+	}
+
+	sch_smba = (unsigned short)smba;
+	if (sch_smba == 0) {
+		dev_err(&dev->dev, "SMBus base address uninitialized!\n");
+		return -ENODEV;
+	}
+	if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
+		return -EBUSY;
+	if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
+		dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
+			sch_smba);
+		return -EBUSY;
+	}
+	dev_dbg(&dev->dev, "SMBA = 0x%X\n", sch_smba);
+
+	/* set up the sysfs linkage to our parent device */
+	sch_adapter.dev.parent = &dev->dev;
+
+	snprintf(sch_adapter.name, sizeof(sch_adapter.name),
+		"SMBus SCH adapter at %04x", sch_smba);
+
+	retval = i2c_add_adapter(&sch_adapter);
+	if (retval) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(sch_smba, SMBIOSIZE);
+		sch_smba = 0;
+	}
+
+	return retval;
+}
+
+static void __devexit sch_remove(struct pci_dev *dev)
+{
+	if (sch_smba) {
+		i2c_del_adapter(&sch_adapter);
+		release_region(sch_smba, SMBIOSIZE);
+		sch_smba = 0;
+	}
+}
+
+static struct pci_driver sch_driver = {
+	.name		= "isch_smbus",
+	.id_table	= sch_ids,
+	.probe		= sch_probe,
+	.remove		= __devexit_p(sch_remove),
+};
+
+static int __init i2c_sch_init(void)
+{
+	return pci_register_driver(&sch_driver);
+}
+
+static void __exit i2c_sch_exit(void)
+{
+	pci_unregister_driver(&sch_driver);
+}
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>");
+MODULE_DESCRIPTION("Intel SCH SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sch_init);
+module_exit(i2c_sch_exit);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a076129..10b9342 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -311,7 +311,7 @@ static struct i2c_adapter mpc_ops = {
 	.name = "MPC adapter",
 	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
-	.class = I2C_CLASS_HWMON,
+	.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.timeout = 1,
 };
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 036e6a8..9e8118d 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -530,7 +530,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	drv_data->adapter.id = I2C_HW_MV64XXX;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
-	drv_data->adapter.class = I2C_CLASS_HWMON;
+	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	drv_data->adapter.timeout = pdata->timeout;
 	drv_data->adapter.nr = pd->id;
 	platform_set_drvdata(pd, drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
new file mode 100644
index 0000000..6a8995d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -0,0 +1,257 @@
+/*
+ * i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard
+ *
+ * Copyright (C) 2008 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * We select the channels by sending commands to the Philips
+ * PCA9556 chip at I2C address 0x18. The main adapter is used for
+ * the non-multiplexed part of the bus, and 4 virtual adapters
+ * are defined for the multiplexed addresses: 0x50-0x53 (memory
+ * module EEPROM) located on channels 1-4. We define one virtual
+ * adapter per CPU, which corresponds to one multiplexed channel:
+ *   CPU0: virtual adapter 1, channel 1
+ *   CPU1: virtual adapter 2, channel 2
+ *   CPU2: virtual adapter 3, channel 3
+ *   CPU3: virtual adapter 4, channel 4
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+extern struct i2c_adapter *nforce2_smbus;
+
+static struct i2c_adapter *s4985_adapter;
+static struct i2c_algorithm *s4985_algo;
+
+/* Wrapper access functions for multiplexed SMBus */
+static DEFINE_MUTEX(nforce2_lock);
+
+static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	int error;
+
+	/* We exclude the multiplexed addresses */
+	if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
+	 || addr == 0x18)
+		return -ENXIO;
+
+	mutex_lock(&nforce2_lock);
+	error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+						command, size, data);
+	mutex_unlock(&nforce2_lock);
+
+	return error;
+}
+
+/* We remember the last used channels combination so as to only switch
+   channels when it is really needed. This greatly reduces the SMBus
+   overhead, but also assumes that nobody will be writing to the PCA9556
+   in our back. */
+static u8 last_channels;
+
+static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr,
+					 unsigned short flags, char read_write,
+					 u8 command, int size,
+					 union i2c_smbus_data *data,
+					 u8 channels)
+{
+	int error;
+
+	/* We exclude the non-multiplexed addresses */
+	if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
+		return -ENXIO;
+
+	mutex_lock(&nforce2_lock);
+	if (last_channels != channels) {
+		union i2c_smbus_data mplxdata;
+		mplxdata.byte = channels;
+
+		error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0,
+							I2C_SMBUS_WRITE, 0x01,
+							I2C_SMBUS_BYTE_DATA,
+							&mplxdata);
+		if (error)
+			goto UNLOCK;
+		last_channels = channels;
+	}
+	error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
+						command, size, data);
+
+UNLOCK:
+	mutex_unlock(&nforce2_lock);
+	return error;
+}
+
+static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU0: channel 1 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x02);
+}
+
+static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU1: channel 2 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x04);
+}
+
+static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU2: channel 3 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x08);
+}
+
+static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	/* CPU3: channel 4 enabled */
+	return nforce2_access_channel(adap, addr, flags, read_write, command,
+				      size, data, 0x10);
+}
+
+static int __init nforce2_s4985_init(void)
+{
+	int i, error;
+	union i2c_smbus_data ioconfig;
+
+	/* Unregister physical bus */
+	if (!nforce2_smbus)
+		return -ENODEV;
+	error = i2c_del_adapter(nforce2_smbus);
+	if (error) {
+		dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
+		goto ERROR0;
+	}
+
+	printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n");
+	/* Define the 5 virtual adapters and algorithms structures */
+	s4985_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (!s4985_adapter) {
+		error = -ENOMEM;
+		goto ERROR1;
+	}
+	s4985_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL);
+	if (!s4985_algo) {
+		error = -ENOMEM;
+		goto ERROR2;
+	}
+
+	/* Fill in the new structures */
+	s4985_algo[0] = *(nforce2_smbus->algo);
+	s4985_algo[0].smbus_xfer = nforce2_access_virt0;
+	s4985_adapter[0] = *nforce2_smbus;
+	s4985_adapter[0].algo = s4985_algo;
+	s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent;
+	for (i = 1; i < 5; i++) {
+		s4985_algo[i] = *(nforce2_smbus->algo);
+		s4985_adapter[i] = *nforce2_smbus;
+		snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name),
+			 "SMBus nForce2 adapter (CPU%d)", i - 1);
+		s4985_adapter[i].algo = s4985_algo + i;
+		s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent;
+	}
+	s4985_algo[1].smbus_xfer = nforce2_access_virt1;
+	s4985_algo[2].smbus_xfer = nforce2_access_virt2;
+	s4985_algo[3].smbus_xfer = nforce2_access_virt3;
+	s4985_algo[4].smbus_xfer = nforce2_access_virt4;
+
+	/* Configure the PCA9556 multiplexer */
+	ioconfig.byte = 0x00; /* All I/O to output mode */
+	error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0,
+						I2C_SMBUS_WRITE, 0x03,
+						I2C_SMBUS_BYTE_DATA, &ioconfig);
+	if (error) {
+		dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
+		error = -EIO;
+		goto ERROR3;
+	}
+
+	/* Register virtual adapters */
+	for (i = 0; i < 5; i++) {
+		error = i2c_add_adapter(s4985_adapter + i);
+		if (error) {
+			dev_err(&nforce2_smbus->dev,
+				"Virtual adapter %d registration "
+				"failed, module not inserted\n", i);
+			for (i--; i >= 0; i--)
+				i2c_del_adapter(s4985_adapter + i);
+			goto ERROR3;
+		}
+	}
+
+	return 0;
+
+ERROR3:
+	kfree(s4985_algo);
+	s4985_algo = NULL;
+ERROR2:
+	kfree(s4985_adapter);
+	s4985_adapter = NULL;
+ERROR1:
+	/* Restore physical bus */
+	i2c_add_adapter(nforce2_smbus);
+ERROR0:
+	return error;
+}
+
+static void __exit nforce2_s4985_exit(void)
+{
+	if (s4985_adapter) {
+		int i;
+
+		for (i = 0; i < 5; i++)
+			i2c_del_adapter(s4985_adapter+i);
+		kfree(s4985_adapter);
+		s4985_adapter = NULL;
+	}
+	kfree(s4985_algo);
+	s4985_algo = NULL;
+
+	/* Restore physical bus */
+	if (i2c_add_adapter(nforce2_smbus))
+		dev_err(&nforce2_smbus->dev, "Physical bus restoration "
+			"failed\n");
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("S4985 SMBus multiplexing");
+MODULE_LICENSE("GPL");
+
+module_init(nforce2_s4985_init);
+module_exit(nforce2_s4985_exit);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 43c9f8d..3b19bc4 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -51,6 +51,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 MODULE_LICENSE("GPL");
@@ -124,6 +125,20 @@ static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = {
 
 static struct pci_driver nforce2_driver;
 
+/* For multiplexing support, we need a global reference to the 1st
+   SMBus channel */
+#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE
+struct i2c_adapter *nforce2_smbus;
+EXPORT_SYMBOL_GPL(nforce2_smbus);
+
+static void nforce2_set_reference(struct i2c_adapter *adap)
+{
+	nforce2_smbus = adap;
+}
+#else
+static inline void nforce2_set_reference(struct i2c_adapter *adap) { }
+#endif
+
 static void nforce2_abort(struct i2c_adapter *adap)
 {
 	struct nforce2_smbus *smbus = adap->algo_data;
@@ -158,16 +173,16 @@ static int nforce2_check_status(struct i2c_adapter *adap)
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
 		if (smbus->can_abort)
 			nforce2_abort(adap);
-		return -1;
+		return -ETIMEDOUT;
 	}
 	if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
 		dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp);
-		return -1;
+		return -EIO;
 	}
 	return 0;
 }
 
-/* Return -1 on error */
+/* Return negative errno on error */
 static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 		unsigned short flags, char read_write,
 		u8 command, int size, union i2c_smbus_data * data)
@@ -175,7 +190,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 	struct nforce2_smbus *smbus = adap->algo_data;
 	unsigned char protocol, pec;
 	u8 len;
-	int i;
+	int i, status;
 
 	protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
 		NVIDIA_SMB_PRTCL_WRITE;
@@ -219,7 +234,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 						"Transaction failed "
 						"(requested block size: %d)\n",
 						len);
-					return -1;
+					return -EINVAL;
 				}
 				outb_p(len, NVIDIA_SMB_BCNT);
 				for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
@@ -231,14 +246,15 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 
 		default:
 			dev_err(&adap->dev, "Unsupported transaction %d\n", size);
-			return -1;
+			return -EOPNOTSUPP;
 	}
 
 	outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
 	outb_p(protocol, NVIDIA_SMB_PRTCL);
 
-	if (nforce2_check_status(adap))
-		return -1;
+	status = nforce2_check_status(adap);
+	if (status)
+		return status;
 
 	if (read_write == I2C_SMBUS_WRITE)
 		return 0;
@@ -260,7 +276,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 				dev_err(&adap->dev, "Transaction failed "
 					"(received block size: 0x%02x)\n",
 					len);
-				return -1;
+				return -EPROTO;
 			}
 			for (i = 0; i < len; i++)
 				data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
@@ -321,21 +337,26 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
 		    != PCIBIOS_SUCCESSFUL) {
 			dev_err(&dev->dev, "Error reading PCI config for %s\n",
 				name);
-			return -1;
+			return -EIO;
 		}
 
 		smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
 		smbus->size = 64;
 	}
 
+	error = acpi_check_region(smbus->base, smbus->size,
+				  nforce2_driver.name);
+	if (error)
+		return -1;
+
 	if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
 		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
 			smbus->base, smbus->base+smbus->size-1, name);
-		return -1;
+		return -EBUSY;
 	}
 	smbus->adapter.owner = THIS_MODULE;
 	smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
-	smbus->adapter.class = I2C_CLASS_HWMON;
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 	smbus->adapter.dev.parent = &dev->dev;
@@ -346,7 +367,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
 	if (error) {
 		dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
 		release_region(smbus->base, smbus->size);
-		return -1;
+		return error;
 	}
 	dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
 	return 0;
@@ -398,6 +419,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 		return -ENODEV;
 	}
 
+	nforce2_set_reference(&smbuses[0].adapter);
 	return 0;
 }
 
@@ -406,6 +428,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev)
 {
 	struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
 
+	nforce2_set_reference(NULL);
 	if (smbuses[0].base) {
 		i2c_del_adapter(&smbuses[0].adapter);
 		release_region(smbuses[0].base, smbuses[0].size);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index f145692..e5193bf 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -29,6 +29,7 @@ struct ocores_i2c {
 	int pos;
 	int nmsgs;
 	int state; /* see STATE_ */
+	int clock_khz;
 };
 
 /* registers */
@@ -173,8 +174,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		return -ETIMEDOUT;
 }
 
-static void ocores_init(struct ocores_i2c *i2c,
-			struct ocores_i2c_platform_data *pdata)
+static void ocores_init(struct ocores_i2c *i2c)
 {
 	int prescale;
 	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
@@ -182,7 +182,7 @@ static void ocores_init(struct ocores_i2c *i2c,
 	/* make sure the device is disabled */
 	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
 
-	prescale = (pdata->clock_khz / (5*100)) - 1;
+	prescale = (i2c->clock_khz / (5*100)) - 1;
 	oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff);
 	oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);
 
@@ -205,7 +205,7 @@ static const struct i2c_algorithm ocores_algorithm = {
 static struct i2c_adapter ocores_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "i2c-ocores",
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &ocores_algorithm,
 };
 
@@ -248,7 +248,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	}
 
 	i2c->regstep = pdata->regstep;
-	ocores_init(i2c, pdata);
+	i2c->clock_khz = pdata->clock_khz;
+	ocores_init(i2c);
 
 	init_waitqueue_head(&i2c->wait);
 	ret = request_irq(res2->start, ocores_isr, 0, pdev->name, i2c);
@@ -312,13 +313,40 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+
+	/* make sure the device is disabled */
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+
+	return 0;
+}
+
+static int ocores_i2c_resume(struct platform_device *pdev)
+{
+	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+
+	ocores_init(i2c);
+
+	return 0;
+}
+#else
+#define ocores_i2c_suspend	NULL
+#define ocores_i2c_resume	NULL
+#endif
+
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ocores-i2c");
 
 static struct platform_driver ocores_i2c_driver = {
-	.probe  = ocores_i2c_probe,
-	.remove = __devexit_p(ocores_i2c_remove),
-	.driver = {
+	.probe   = ocores_i2c_probe,
+	.remove  = __devexit_p(ocores_i2c_remove),
+	.suspend = ocores_i2c_suspend,
+	.resume  = ocores_i2c_resume,
+	.driver  = {
 		.owner = THIS_MODULE,
 		.name = "ocores-i2c",
 	},
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 1603c81..adf0fbb 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -365,7 +365,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev,
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		 "PA Semi SMBus adapter at 0x%lx", smbus->base);
-	smbus->adapter.class = I2C_CLASS_HWMON;
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 	smbus->adapter.nr = PCI_FUNC(dev->devfn);
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 9d75f51..6bb15ad 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -163,7 +163,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 
 	i2c->reg_base = ioremap(res->start, res_len(res));
 	if (!i2c->reg_base) {
-		ret = -EIO;
+		ret = -ENOMEM;
 		goto e_remap;
 	}
 	i2c->io_base = res->start;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index ac91659..eaa9b38 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -1,6 +1,4 @@
 /*
-    piix4.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
     Philip Edelbrock <phil@netroedge.com>
 
@@ -39,16 +37,10 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 
-struct sd {
-	const unsigned short mfr;
-	const unsigned short dev;
-	const unsigned char fn;
-	const char *name;
-};
-
 /* PIIX4 SMBus address offsets */
 #define SMBHSTSTS	(0 + piix4_smba)
 #define SMBHSLVSTS	(1 + piix4_smba)
@@ -101,8 +93,6 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
-static int piix4_transaction(void);
-
 static unsigned short piix4_smba;
 static int srvrworks_csb5_delay;
 static struct pci_driver piix4_driver;
@@ -141,8 +131,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 {
 	unsigned char temp;
 
-	dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
-
 	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
 	    (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
 		srvrworks_csb5_delay = 1;
@@ -172,17 +160,20 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
 		piix4_smba &= 0xfff0;
 		if(piix4_smba == 0) {
-			dev_err(&PIIX4_dev->dev, "SMB base address "
+			dev_err(&PIIX4_dev->dev, "SMBus base address "
 				"uninitialized - upgrade BIOS or use "
 				"force_addr=0xaddr\n");
 			return -ENODEV;
 		}
 	}
 
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -EBUSY;
+
 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
-		dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
 			piix4_smba);
-		return -ENODEV;
+		return -EBUSY;
 	}
 
 	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
@@ -228,13 +219,13 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 			"(or code out of date)!\n");
 
 	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
-	dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp);
-	dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba);
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, temp);
 
 	return 0;
 }
 
-/* Another internally used function */
 static int piix4_transaction(void)
 {
 	int temp;
@@ -253,7 +244,7 @@ static int piix4_transaction(void)
 		outb_p(temp, SMBHSTSTS);
 		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
 			dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
-			return -1;
+			return -EBUSY;
 		} else {
 			dev_dbg(&piix4_adapter.dev, "Successful!\n");
 		}
@@ -275,23 +266,23 @@ static int piix4_transaction(void)
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
-		result = -1;
+		result = -ETIMEDOUT;
 	}
 
 	if (temp & 0x10) {
-		result = -1;
+		result = -EIO;
 		dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n");
 	}
 
 	if (temp & 0x08) {
-		result = -1;
+		result = -EIO;
 		dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be "
 			"locked until next hard reset. (sorry!)\n");
 		/* Clock stops and slave is stuck in mid-transmission */
 	}
 
 	if (temp & 0x04) {
-		result = -1;
+		result = -ENXIO;
 		dev_dbg(&piix4_adapter.dev, "Error: no response!\n");
 	}
 
@@ -309,31 +300,29 @@ static int piix4_transaction(void)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		 unsigned short flags, char read_write,
 		 u8 command, int size, union i2c_smbus_data * data)
 {
 	int i, len;
+	int status;
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		return -1;
 	case I2C_SMBUS_QUICK:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
 		size = PIIX4_QUICK;
 		break;
 	case I2C_SMBUS_BYTE:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(command, SMBHSTCMD);
 		size = PIIX4_BYTE;
 		break;
 	case I2C_SMBUS_BYTE_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE)
@@ -341,7 +330,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		size = PIIX4_BYTE_DATA;
 		break;
 	case I2C_SMBUS_WORD_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
@@ -351,15 +340,13 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		size = PIIX4_WORD_DATA;
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
 			len = data->block[0];
-			if (len < 0)
-				len = 0;
-			if (len > 32)
-				len = 32;
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
 			outb_p(len, SMBHSTDAT0);
 			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 			for (i = 1; i <= len; i++)
@@ -367,12 +354,16 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = PIIX4_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
 
-	if (piix4_transaction())	/* Error in transaction */
-		return -1;
+	status = piix4_transaction();
+	if (status)
+		return status;
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
 		return 0;
@@ -388,6 +379,8 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		break;
 	case PIIX4_BLOCK_DATA:
 		data->block[0] = inb_p(SMBHSTDAT0);
+		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
 		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 		for (i = 1; i <= data->block[0]; i++)
 			data->block[i] = inb_p(SMBBLKDAT);
@@ -411,7 +404,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_PIIX4,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 63b3e2c..dcf2045 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -622,7 +622,7 @@ static struct i2c_algorithm pmcmsptwi_algo = {
 
 static struct i2c_adapter pmcmsptwi_adapter = {
 	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &pmcmsptwi_algo,
 	.name		= DRV_NAME,
 };
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
deleted file mode 100644
index 07c1f1e..0000000
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- *    kernel/busses/i2c-prosavage.c
- *
- *    i2c bus driver for S3/VIA 8365/8375 graphics processor.
- *    Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
- *    Based on code written by:
- *	Frodo Looijaard <frodol@dds.nl>,
- *	Philip Edelbrock <phil@netroedge.com>,
- *	Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- *	Mark D. Studebaker <mdsxyz123@yahoo.com>
- *	Simon Vogl
- *	and others
- *
- *    Please read the lm_sensors documentation for details on use.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/*  18-05-2003 HVE - created
- *  14-06-2003 HVE - adapted for lm_sensors2
- *  17-06-2003 HVE - linux 2.5.xx compatible
- *  18-06-2003 HVE - codingstyle
- *  21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
- *		     codingstyle, mmio enabled
- *
- *  This driver interfaces to the I2C bus of the VIA north bridge embedded
- *  ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
- *
- *  Graphics cores:
- *   S3/VIA KM266/VT8375 aka ProSavage8
- *   S3/VIA KM133/VT8365 aka Savage4
- *
- *  Two serial busses are implemented:
- *   SERIAL1 - I2C serial communications interface
- *   SERIAL2 - DDC2 monitor communications interface
- *
- *  Tested on a FX41 mainboard, see http://www.shuttle.com
- * 
- *
- *  TODO:
- *  - integration with prosavage framebuffer device
- *    (Additional documentation needed :(
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/*
- * driver configuration
- */
-#define MAX_BUSSES	2
-
-struct s_i2c_bus {
-	void __iomem *mmvga;
-	int	i2c_reg;
-	int	adap_ok;
-	struct i2c_adapter		adap;
-	struct i2c_algo_bit_data	algo;
-};
-
-struct s_i2c_chip {
-	void __iomem *mmio;
-	struct s_i2c_bus	i2c_bus[MAX_BUSSES];
-};
-
-
-/*
- * i2c configuration
- */
-#define CYCLE_DELAY	10
-#define TIMEOUT		(HZ / 2)
-
-
-/* 
- * S3/VIA 8365/8375 registers
- */
-#define VGA_CR_IX	0x3d4
-#define VGA_CR_DATA	0x3d5
-
-#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
-#define MM_SERIAL1	0xff20
-#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
-
-/* based on vt8365 documentation */
-#define I2C_ENAB	0x10
-#define I2C_SCL_OUT	0x01
-#define I2C_SDA_OUT	0x02
-#define I2C_SCL_IN	0x04
-#define I2C_SDA_IN	0x08
-
-#define SET_CR_IX(p, val)	writeb((val), (p)->mmvga + VGA_CR_IX)
-#define SET_CR_DATA(p, val)	writeb((val), (p)->mmvga + VGA_CR_DATA)
-#define GET_CR_DATA(p)		readb((p)->mmvga + VGA_CR_DATA)
-
-
-/*
- * Serial bus line handling
- *
- * serial communications register as parameter in private data
- *
- * TODO: locks with other code sections accessing video registers?
- */
-static void bit_s3via_setscl(void *bus, int val)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-	unsigned int r;
-
-	SET_CR_IX(p, p->i2c_reg);
-	r = GET_CR_DATA(p);
-	r |= I2C_ENAB;
-	if (val) {
-		r |= I2C_SCL_OUT;
-	} else {
-		r &= ~I2C_SCL_OUT;
-	}
-	SET_CR_DATA(p, r);
-}
-
-static void bit_s3via_setsda(void *bus, int val)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-	unsigned int r;
-	
-	SET_CR_IX(p, p->i2c_reg);
-	r = GET_CR_DATA(p);
-	r |= I2C_ENAB;
-	if (val) {
-		r |= I2C_SDA_OUT;
-	} else {
-		r &= ~I2C_SDA_OUT;
-	}
-	SET_CR_DATA(p, r);
-}
-
-static int bit_s3via_getscl(void *bus)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
-	SET_CR_IX(p, p->i2c_reg);
-	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
-}
-
-static int bit_s3via_getsda(void *bus)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
-	SET_CR_IX(p, p->i2c_reg);
-	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
-}
-
-
-/*
- * adapter initialisation
- */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
-{
-	int ret;
-	p->adap.owner	  = THIS_MODULE;
-	p->adap.id	  = I2C_HW_B_S3VIA;
-	p->adap.algo_data = &p->algo;
-	p->adap.dev.parent = &dev->dev;
-	p->algo.setsda	  = bit_s3via_setsda;
-	p->algo.setscl	  = bit_s3via_setscl;
-	p->algo.getsda	  = bit_s3via_getsda;
-	p->algo.getscl	  = bit_s3via_getscl;
-	p->algo.udelay	  = CYCLE_DELAY;
-	p->algo.timeout	  = TIMEOUT;
-	p->algo.data	  = p;
-	p->mmvga	  = mmvga;
-	p->i2c_reg	  = i2c_reg;
-    
-	ret = i2c_bit_add_bus(&p->adap);
-	if (ret) {
-		return ret;
-	}
-
-	p->adap_ok = 1;
-	return 0;
-}
-
-
-/*
- * Cleanup stuff
- */
-static void prosavage_remove(struct pci_dev *dev)
-{
-	struct s_i2c_chip *chip;
-	int i, ret;
-
-	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-
-	if (!chip) {
-		return;
-	}
-	for (i = MAX_BUSSES - 1; i >= 0; i--) {
-		if (chip->i2c_bus[i].adap_ok == 0)
-			continue;
-
-		ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
-	        if (ret) {
-			dev_err(&dev->dev, "%s not removed\n",
-				chip->i2c_bus[i].adap.name);
-		}
-	}
-	if (chip->mmio) {
-		iounmap(chip->mmio);
-	}
-	kfree(chip);
-}
-
-
-/*
- * Detect chip and initialize it
- */
-static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	int ret;
-	unsigned long base, len;
-	struct s_i2c_chip *chip;
-	struct s_i2c_bus  *bus;
-
-	pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
-	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-	if (chip == NULL) {
-		return -ENOMEM;
-	}
-
-	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
-	len  = dev->resource[0].end - base + 1;
-	chip->mmio = ioremap_nocache(base, len);
-
-	if (chip->mmio == NULL) {
-		dev_err(&dev->dev, "ioremap failed\n");
-		prosavage_remove(dev);
-		return -ENODEV;
-	}
-
-
-	/*
-	 * Chip initialisation
-	 */
-	/* Unlock Extended IO Space ??? */
-
-
-	/*
-	 * i2c bus registration
-	 */
-	bus = &chip->i2c_bus[0];
-	snprintf(bus->adap.name, sizeof(bus->adap.name),
-		"ProSavage I2C bus at %02x:%02x.%x",
-		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
-	if (ret) {
-		goto err_adap;
-	}
-	/*
-	 * ddc bus registration
-	 */
-	bus = &chip->i2c_bus[1];
-	snprintf(bus->adap.name, sizeof(bus->adap.name),
-		"ProSavage DDC bus at %02x:%02x.%x",
-		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
-	if (ret) {
-		goto err_adap;
-	}
-	return 0;
-err_adap:
-	dev_err(&dev->dev, "%s failed\n", bus->adap.name);
-	prosavage_remove(dev);
-	return ret;
-}
-
-
-/*
- * Data for PCI driver interface
- */
-static struct pci_device_id prosavage_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
-	{ 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
-
-static struct pci_driver prosavage_driver = {
-	.name		=	"prosavage_smbus",
-	.id_table	=	prosavage_pci_tbl,
-	.probe		=	prosavage_probe,
-	.remove		=	prosavage_remove,
-};
-
-static int __init i2c_prosavage_init(void)
-{
-	return pci_register_driver(&prosavage_driver);
-}
-
-static void __exit i2c_prosavage_exit(void)
-{
-	pci_unregister_driver(&prosavage_driver);
-}
-
-MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
-MODULE_AUTHOR("Henk Vergonet");
-MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
-MODULE_LICENSE("GPL");
-
-module_init (i2c_prosavage_init);
-module_exit (i2c_prosavage_exit);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index dde6ce9..af9e603 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1104,5 +1104,5 @@ static void __exit i2c_adap_pxa_exit(void)
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:pxa2xx-i2c");
 
-module_init(i2c_adap_pxa_init);
+subsys_initcall(i2c_adap_pxa_init);
 module_exit(i2c_adap_pxa_exit);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 9e8c875..007390a 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -590,7 +590,7 @@ static struct s3c24xx_i2c s3c24xx_i2c = {
 		.owner			= THIS_MODULE,
 		.algo			= &s3c24xx_i2c_algorithm,
 		.retries		= 2,
-		.class			= I2C_CLASS_HWMON,
+		.class			= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
deleted file mode 100644
index 8adf4ab..0000000
--- a/drivers/i2c/busses/i2c-savage4.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
-    i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
-    Copyright (C) 1998-2003  The LM Sensors Team
-    Alexander Wold <awold@bigfoot.com>
-    Mark D. Studebaker <mdsxyz123@yahoo.com>
-    
-    Based on i2c-voodoo3.c.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Savage4 to gain access to
-   the BT869 and possibly other I2C devices. The DDC bus is not
-   yet supported because its register is not memory-mapped.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* device IDs */
-#define PCI_CHIP_SAVAGE4	0x8A22
-#define PCI_CHIP_SAVAGE2000	0x9102
-
-#define REG			0xff20	/* Serial Port 1 Register */
-
-/* bit locations in the register */
-#define I2C_ENAB		0x00000020
-#define I2C_SCL_OUT		0x00000001
-#define I2C_SDA_OUT		0x00000002
-#define I2C_SCL_IN		0x00000008
-#define I2C_SDA_IN		0x00000010
-
-/* delays */
-#define CYCLE_DELAY		10
-#define TIMEOUT			(HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The sav GPIO registers don't have individual masks for each bit
-   so we always have to read before writing. */
-
-static void bit_savi2c_setscl(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if(val)
-		r |= I2C_SCL_OUT;
-	else
-		r &= ~I2C_SCL_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-static void bit_savi2c_setsda(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if(val)
-		r |= I2C_SDA_OUT;
-	else
-		r &= ~I2C_SDA_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
-   We rely on the i2c-algo-bit routines to set the pins high before
-   reading the input from other chips. */
-
-static int bit_savi2c_getscl(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_savi2c_getsda(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-/* Configures the chip */
-
-static int config_s4(struct pci_dev *dev)
-{
-	unsigned long cadr;
-
-	/* map memory */
-	cadr = dev->resource[0].start;
-	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
-	ioaddr = ioremap_nocache(cadr, 0x0080000);
-	if (ioaddr) {
-		/* writel(0x8160, ioaddr + REG2); */
-		writel(0x00000020, ioaddr + REG);
-		dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static struct i2c_algo_bit_data sav_i2c_bit_data = {
-	.setsda		= bit_savi2c_setsda,
-	.setscl		= bit_savi2c_setscl,
-	.getsda		= bit_savi2c_getsda,
-	.getscl		= bit_savi2c_getscl,
-	.udelay		= CYCLE_DELAY,
-	.timeout	= TIMEOUT
-};
-
-static struct i2c_adapter savage4_i2c_adapter = {
-	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_SAVAGE,
-	.name		= "I2C Savage4 adapter",
-	.algo_data	= &sav_i2c_bit_data,
-};
-
-static struct pci_device_id savage4_ids[] __devinitdata = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, savage4_ids);
-
-static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	int retval;
-
-	retval = config_s4(dev);
-	if (retval)
-		return retval;
-
-	/* set up the sysfs linkage to our parent device */
-	savage4_i2c_adapter.dev.parent = &dev->dev;
-
-	return i2c_bit_add_bus(&savage4_i2c_adapter);
-}
-
-static void __devexit savage4_remove(struct pci_dev *dev)
-{
-	i2c_del_adapter(&savage4_i2c_adapter);
-	iounmap(ioaddr);
-}
-
-static struct pci_driver savage4_driver = {
-	.name		= "savage4_smbus",
-	.id_table	= savage4_ids,
-	.probe		= savage4_probe,
-	.remove		= __devexit_p(savage4_remove),
-};
-
-static int __init i2c_savage4_init(void)
-{
-	return pci_register_driver(&savage4_driver);
-}
-
-static void __exit i2c_savage4_exit(void)
-{
-	pci_unregister_driver(&savage4_driver);
-}
-
-MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
-		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_savage4_init);
-module_exit(i2c_savage4_exit);
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 114634d..4ddefbf 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -143,7 +143,7 @@ static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
 	csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
 	csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
 
-	return i2c_add_adapter(i2c_adap);
+	return i2c_add_numbered_adapter(i2c_adap);
 }
 
 
@@ -156,17 +156,19 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
 	{
 		.owner		= THIS_MODULE,
 		.id		= I2C_HW_SIBYTE,
-		.class		= I2C_CLASS_HWMON,
+		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[0],
+		.nr		= 0,
 		.name		= "SiByte SMBus 0",
 	},
 	{
 		.owner		= THIS_MODULE,
 		.id		= I2C_HW_SIBYTE,
-		.class		= I2C_CLASS_HWMON,
+		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[1],
+		.nr		= 1,
 		.name		= "SiByte SMBus 1",
 	},
 };
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 9ca8f91..dfc2d5e 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -1,6 +1,4 @@
 /*
-    sis5595.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
     Philip Edelbrock <phil@netroedge.com>
 
@@ -62,6 +60,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 static int blacklist[] = {
@@ -174,6 +173,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
 
 	/* NB: We grab just the two SMBus registers here, but this may still
 	 * interfere with ACPI :-(  */
+	retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
+				   sis5595_driver.name);
+	if (retval)
+		return retval;
+
 	if (!request_region(sis5595_base + SMB_INDEX, 2,
 			    sis5595_driver.name)) {
 		dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
@@ -236,7 +240,7 @@ static int sis5595_transaction(struct i2c_adapter *adap)
 		sis5595_write(SMB_STS_HI, temp >> 8);
 		if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
 			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
-			return -1;
+			return -EBUSY;
 		} else {
 			dev_dbg(&adap->dev, "Successful!\n");
 		}
@@ -254,19 +258,19 @@ static int sis5595_transaction(struct i2c_adapter *adap)
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
-		result = -1;
+		result = -ETIMEDOUT;
 	}
 
 	if (temp & 0x10) {
 		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
-		result = -1;
+		result = -ENXIO;
 	}
 
 	if (temp & 0x20) {
 		dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
 			"next hard reset (or not...)\n");
 		/* Clock stops and slave is stuck in mid-transmission */
-		result = -1;
+		result = -EIO;
 	}
 
 	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
@@ -282,11 +286,13 @@ static int sis5595_transaction(struct i2c_adapter *adap)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
 			  unsigned short flags, char read_write,
 			  u8 command, int size, union i2c_smbus_data *data)
 {
+	int status;
+
 	switch (size) {
 	case I2C_SMBUS_QUICK:
 		sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
@@ -318,13 +324,14 @@ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
 		break;
 	default:
 		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
-		return -1;
+		return -EOPNOTSUPP;
 	}
 
 	sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
 
-	if (sis5595_transaction(adap))
-		return -1;
+	status = sis5595_transaction(adap);
+	if (status)
+		return status;
 
 	if ((size != SIS5595_PROC_CALL) &&
 	    ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
@@ -359,7 +366,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_SIS5595,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 3765dd7..e7c4b79 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -1,7 +1,4 @@
 /*
-    i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
-
     Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de>
 
     This program is free software; you can redistribute it and/or modify
@@ -55,6 +52,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 /* SIS630 SMBus registers */
@@ -134,7 +132,7 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc
 
 		if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) {
 			dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
-			return -1;
+			return -EBUSY;
                 } else {
 			dev_dbg(&adap->dev, "Successful!\n");
 		}
@@ -177,17 +175,17 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
-		result = -1;
+		result = -ETIMEDOUT;
 	}
 
 	if (temp & 0x02) {
 		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
-		result = -1;
+		result = -ENXIO;
 	}
 
 	if (temp & 0x04) {
 		dev_err(&adap->dev, "Bus collision!\n");
-		result = -1;
+		result = -EIO;
 		/*
 		  TBD: Datasheet say:
 		  the software should clear this bit and restart SMBUS operation.
@@ -250,8 +248,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 			if (i==8 || (len<8 && i==len)) {
 				dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
 				/* first transaction */
-				if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock))
-					return -1;
+				rc = sis630_transaction_start(adap,
+						SIS630_BLOCK_DATA, &oldclock);
+				if (rc)
+					return rc;
 			}
 			else if ((i-1)%8 == 7 || i==len) {
 				dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
@@ -264,9 +264,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 					*/
 					sis630_write(SMB_STS,0x10);
 				}
-				if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+				rc = sis630_transaction_wait(adap,
+						SIS630_BLOCK_DATA);
+				if (rc) {
 					dev_dbg(&adap->dev, "trans_wait failed\n");
-					rc = -1;
 					break;
 				}
 			}
@@ -275,13 +276,14 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 	else {
 		/* read request */
 		data->block[0] = len = 0;
-		if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) {
-			return -1;
-		}
+		rc = sis630_transaction_start(adap,
+				SIS630_BLOCK_DATA, &oldclock);
+		if (rc)
+			return rc;
 		do {
-			if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
+			rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA);
+			if (rc) {
 				dev_dbg(&adap->dev, "trans_wait failed\n");
-				rc = -1;
 				break;
 			}
 			/* if this first transaction then read byte count */
@@ -311,11 +313,13 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat
 	return rc;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
 			 unsigned short flags, char read_write,
 			 u8 command, int size, union i2c_smbus_data *data)
 {
+	int status;
+
 	switch (size) {
 		case I2C_SMBUS_QUICK:
 			sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
@@ -350,13 +354,14 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
 			size = SIS630_BLOCK_DATA;
 			return sis630_block_data(adap, data, read_write);
 		default:
-			printk("Unsupported I2C size\n");
-			return -1;
-			break;
+			dev_warn(&adap->dev, "Unsupported transaction %d\n",
+				 size);
+			return -EOPNOTSUPP;
 	}
 
-	if (sis630_transaction(adap, size))
-		return -1;
+	status = sis630_transaction(adap, size);
+	if (status)
+		return status;
 
 	if ((size != SIS630_PCALL) &&
 		((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) {
@@ -372,9 +377,6 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
 		case SIS630_WORD_DATA:
 			data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
 			break;
-		default:
-			return -1;
-			break;
 	}
 
 	return 0;
@@ -433,6 +435,11 @@ static int sis630_setup(struct pci_dev *sis630_dev)
 
 	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
 
+	retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+				   sis630_driver.name);
+	if (retval)
+		goto exit;
+
 	/* Everything is happy, let's grab the memory and set things up. */
 	if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
 			    sis630_driver.name)) {
@@ -458,7 +465,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_SIS630,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index dc235bb..f1bba63 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -1,7 +1,4 @@
 /*
-    sis96x.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
-
     Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
 
     This program is free software; you can redistribute it and/or modify
@@ -40,6 +37,7 @@
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 /* base address register in PCI config space */
@@ -111,7 +109,7 @@ static int sis96x_transaction(int size)
 		/* check it again */
 		if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
 			dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
-			return -1;
+			return -EBUSY;
 		} else {
 			dev_dbg(&sis96x_adapter.dev, "Successful\n");
 		}
@@ -136,19 +134,19 @@ static int sis96x_transaction(int size)
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
-		result = -1;
+		result = -ETIMEDOUT;
 	}
 
 	/* device error - probably missing ACK */
 	if (temp & 0x02) {
 		dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
-		result = -1;
+		result = -ENXIO;
 	}
 
 	/* bus collision */
 	if (temp & 0x04) {
 		dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
-		result = -1;
+		result = -EIO;
 	}
 
 	/* Finish up by resetting the bus */
@@ -161,11 +159,12 @@ static int sis96x_transaction(int size)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
 			 unsigned short flags, char read_write,
 			 u8 command, int size, union i2c_smbus_data * data)
 {
+	int status;
 
 	switch (size) {
 	case I2C_SMBUS_QUICK:
@@ -200,20 +199,14 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
 			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
-		/* TO DO: */
-		dev_info(&adap->dev, "SMBus block not implemented!\n");
-		return -1;
-		break;
-
 	default:
-		dev_info(&adap->dev, "Unsupported I2C size\n");
-		return -1;
-		break;
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
-	if (sis96x_transaction(size))
-		return -1;
+	status = sis96x_transaction(size);
+	if (status)
+		return status;
 
 	if ((size != SIS96x_PROC_CALL) &&
 		((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
@@ -249,7 +242,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_SIS96X,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
@@ -286,6 +279,10 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
 	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
 			sis96x_smbus_base);
 
+	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
+	if (retval)
+		return retval;
+
 	/* Everything is happy, let's grab the memory and set things up. */
 	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
 			    sis96x_driver.name)) {
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index d08eeec..1b7b2af 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -43,7 +43,7 @@ struct stub_chip {
 
 static struct stub_chip *stub_chips;
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 	char read_write, u8 command, int size, union i2c_smbus_data * data)
 {
@@ -120,7 +120,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 
 	default:
 		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
-		ret = -1;
+		ret = -EOPNOTSUPP;
 		break;
 	} /* switch (size) */
 
@@ -140,7 +140,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter stub_adapter = {
 	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 	.name		= "SMBus stub driver",
 };
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index de9db49..224aa12 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -96,9 +96,8 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 			sprintf(p, "$%02X", command);
 		break;
 	default:
-		dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
-			size);
-		return -EINVAL;
+		dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	/* Send the transaction to the TAOS EVM */
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 61716f6..29cef04 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -1,7 +1,4 @@
 /*
-    i2c-via.c - Part of lm_sensors,  Linux kernel modules
-                for hardware monitoring
-
     i2c Support for Via Technologies 82C586B South Bridge
 
     Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi>
@@ -87,7 +84,7 @@ static struct i2c_algo_bit_data bit_data = {
 static struct i2c_adapter vt586b_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_B_VIA,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.name		= "VIA i2c",
 	.algo_data	= &bit_data,
 };
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 77b13d0..862eb35 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,6 +1,4 @@
 /*
-    i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
     Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -50,6 +48,7 @@
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 static struct pci_dev *vt596_pdev;
@@ -152,7 +151,7 @@ static int vt596_transaction(u8 size)
 		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
 			dev_err(&vt596_adapter.dev, "SMBus reset failed! "
 				"(0x%02x)\n", temp);
-			return -1;
+			return -EBUSY;
 		}
 	}
 
@@ -167,24 +166,24 @@ static int vt596_transaction(u8 size)
 
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
 	}
 
 	if (temp & 0x10) {
-		result = -1;
+		result = -EIO;
 		dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
 			size);
 	}
 
 	if (temp & 0x08) {
-		result = -1;
+		result = -EIO;
 		dev_err(&vt596_adapter.dev, "SMBus collision!\n");
 	}
 
 	if (temp & 0x04) {
 		int read = inb_p(SMBHSTADD) & 0x01;
-		result = -1;
+		result = -ENXIO;
 		/* The quick and receive byte commands are used to probe
 		   for chips, so errors are expected, and we don't want
 		   to frighten the user. */
@@ -202,12 +201,13 @@ static int vt596_transaction(u8 size)
 	return result;
 }
 
-/* Return -1 on error, 0 on success */
+/* Return negative errno on error, 0 on success */
 static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 		unsigned short flags, char read_write, u8 command,
 		int size, union i2c_smbus_data *data)
 {
 	int i;
+	int status;
 
 	switch (size) {
 	case I2C_SMBUS_QUICK:
@@ -258,8 +258,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 
 	outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
 
-	if (vt596_transaction(size)) /* Error in transaction */
-		return -1;
+	status = vt596_transaction(size);
+	if (status)
+		return status;
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
 		return 0;
@@ -285,9 +286,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 	return 0;
 
 exit_unsupported:
-	dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+	dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
 		 size);
-	return -1;
+	return -EOPNOTSUPP;
 }
 
 static u32 vt596_func(struct i2c_adapter *adapter)
@@ -309,7 +310,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
 	.id		= I2C_HW_SMBUS_VIA2,
-	.class		= I2C_CLASS_HWMON,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
@@ -354,6 +355,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 	}
 
 found:
+	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
+	if (error)
+		return error;
+
 	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
 		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
 			vt596_smba);
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 88a3447..1d4ae26 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -1,6 +1,4 @@
 /*
-    voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware
-              monitoring
     Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>,
     Ralph Metzler <rjkm@thp.uni-koeln.de>, and
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 61abe0f..ed794b1 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,7 +442,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
 	adapter->owner = THIS_MODULE;
 	adapter->id = I2C_HW_SMBUS_SCX200;
 	adapter->algo = &scx200_acb_algorithm;
-	adapter->class = I2C_CLASS_HWMON;
+	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adapter->dev.parent = dev;
 
 	mutex_init(&iface->mutex);