Merge branch 'linux-2.6' into for-linus

9 files changed, 121 insertions, 126 deletions

diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
index 574a678..90c1454 100644
--- a/drivers/infiniband/hw/ipath/Kconfig
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_IPATH
 	tristate "QLogic InfiniPath Driver"
-	depends on PCI_MSI && 64BIT && INFINIBAND
+	depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND && NET
 	---help---
 	This is a driver for QLogic InfiniPath host channel adapters,
 	including InfiniBand verbs support.  This driver allows these
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index 5e29cb0..7dc1055 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -10,8 +10,6 @@ ib_ipath-y := \
 	ipath_eeprom.o \
 	ipath_file_ops.o \
 	ipath_fs.o \
-	ipath_iba6110.o \
-	ipath_iba6120.o \
 	ipath_init_chip.o \
 	ipath_intr.o \
 	ipath_keys.o \
@@ -31,5 +29,8 @@ ib_ipath-y := \
 	ipath_verbs_mcast.o \
 	ipath_verbs.o
 
+ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
+ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
+
 ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
 ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 29958b6..28c087b 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -67,19 +67,54 @@ static struct file_operations diag_file_ops = {
 	.release = ipath_diag_release
 };
 
+static ssize_t ipath_diagpkt_write(struct file *fp,
+				   const char __user *data,
+				   size_t count, loff_t *off);
+
+static struct file_operations diagpkt_file_ops = {
+	.owner = THIS_MODULE,
+	.write = ipath_diagpkt_write,
+};
+
+static atomic_t diagpkt_count = ATOMIC_INIT(0);
+static struct cdev *diagpkt_cdev;
+static struct class_device *diagpkt_class_dev;
+
 int ipath_diag_add(struct ipath_devdata *dd)
 {
 	char name[16];
+	int ret = 0;
+
+	if (atomic_inc_return(&diagpkt_count) == 1) {
+		ret = ipath_cdev_init(IPATH_DIAGPKT_MINOR,
+				      "ipath_diagpkt", &diagpkt_file_ops,
+				      &diagpkt_cdev, &diagpkt_class_dev);
+
+		if (ret) {
+			ipath_dev_err(dd, "Couldn't create ipath_diagpkt "
+				      "device: %d", ret);
+			goto done;
+		}
+	}
 
 	snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
 
-	return ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
-			       &diag_file_ops, &dd->diag_cdev,
-			       &dd->diag_class_dev);
+	ret = ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
+			      &diag_file_ops, &dd->diag_cdev,
+			      &dd->diag_class_dev);
+	if (ret)
+		ipath_dev_err(dd, "Couldn't create %s device: %d",
+			      name, ret);
+
+done:
+	return ret;
 }
 
 void ipath_diag_remove(struct ipath_devdata *dd)
 {
+	if (atomic_dec_and_test(&diagpkt_count))
+		ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_class_dev);
+
 	ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_class_dev);
 }
 
@@ -275,30 +310,6 @@ bail:
 	return ret;
 }
 
-static ssize_t ipath_diagpkt_write(struct file *fp,
-				   const char __user *data,
-				   size_t count, loff_t *off);
-
-static struct file_operations diagpkt_file_ops = {
-	.owner = THIS_MODULE,
-	.write = ipath_diagpkt_write,
-};
-
-static struct cdev *diagpkt_cdev;
-static struct class_device *diagpkt_class_dev;
-
-int __init ipath_diagpkt_add(void)
-{
-	return ipath_cdev_init(IPATH_DIAGPKT_MINOR,
-			       "ipath_diagpkt", &diagpkt_file_ops,
-			       &diagpkt_cdev, &diagpkt_class_dev);
-}
-
-void __exit ipath_diagpkt_remove(void)
-{
-	ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_class_dev);
-}
-
 /**
  * ipath_diagpkt_write - write an IB packet
  * @fp: the diag data device file pointer
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 12cefa6..1aeddb4 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -304,7 +304,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	}
 	addr = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
-	ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x "
+	ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
 		   "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
 		   ent->device, ent->driver_data);
 
@@ -390,12 +390,16 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 
 	/* setup the chip-specific functions, as early as possible. */
 	switch (ent->device) {
+#ifdef CONFIG_HT_IRQ
 	case PCI_DEVICE_ID_INFINIPATH_HT:
 		ipath_init_iba6110_funcs(dd);
 		break;
+#endif
+#ifdef CONFIG_PCI_MSI
 	case PCI_DEVICE_ID_INFINIPATH_PE800:
 		ipath_init_iba6120_funcs(dd);
 		break;
+#endif
 	default:
 		ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
 			      "failing\n", ent->device);
@@ -467,15 +471,15 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	 * check 0 irq after we return from chip-specific bus setup, since
 	 * that can affect this due to setup
 	 */
-	if (!pdev->irq)
+	if (!dd->ipath_irq)
 		ipath_dev_err(dd, "irq is 0, BIOS error?  Interrupts won't "
 			      "work\n");
 	else {
-		ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
+		ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
 				  IPATH_DRV_NAME, dd);
 		if (ret) {
 			ipath_dev_err(dd, "Couldn't setup irq handler, "
-				      "irq=%u: %d\n", pdev->irq, ret);
+				      "irq=%d: %d\n", dd->ipath_irq, ret);
 			goto bail_iounmap;
 		}
 	}
@@ -637,11 +641,10 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev)
 	 * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
 	 * for all versions of the driver, if they were allocated
 	 */
-	if (pdev->irq) {
-		ipath_cdbg(VERBOSE,
-			   "unit %u free_irq of irq %x\n",
-			   dd->ipath_unit, pdev->irq);
-		free_irq(pdev->irq, dd);
+	if (dd->ipath_irq) {
+		ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+			   dd->ipath_unit, dd->ipath_irq);
+		dd->ipath_f_free_irq(dd);
 	} else
 		ipath_dbg("irq is 0, not doing free_irq "
 			  "for unit %u\n", dd->ipath_unit);
@@ -2005,18 +2008,8 @@ static int __init infinipath_init(void)
 		goto bail_group;
 	}
 
-	ret = ipath_diagpkt_add();
-	if (ret < 0) {
-		printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
-		       "diag data device: error %d\n", -ret);
-		goto bail_ipathfs;
-	}
-
 	goto bail;
 
-bail_ipathfs:
-	ipath_exit_ipathfs();
-
 bail_group:
 	ipath_driver_remove_group(&ipath_driver.driver);
 
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 9e4e8d4..e57c7a3 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -38,6 +38,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/htirq.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -913,49 +914,40 @@ static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
 	}
 }
 
-static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
-			    int pos)
+static int ipath_ht_intconfig(struct ipath_devdata *dd)
 {
-	u32 int_handler_addr_lower;
-	u32 int_handler_addr_upper;
-	u64 ihandler;
-	u32 intvec;
+	int ret;
 
-	/* use indirection register to get the intr handler */
-	pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10);
-	pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower);
-	pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11);
-	pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper);
+	if (dd->ipath_intconfig) {
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
+				 dd->ipath_intconfig);	/* interrupt address */
+		ret = 0;
+	} else {
+		ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
+			      "interrupt address\n");
+		ret = -EINVAL;
+	}
 
-	ihandler = (u64) int_handler_addr_lower |
-		((u64) int_handler_addr_upper << 32);
+	return ret;
+}
+
+static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
+				struct ht_irq_msg *msg)
+{
+	struct ipath_devdata *dd = pci_get_drvdata(dev);
+	u64 prev_intconfig = dd->ipath_intconfig;
+
+	dd->ipath_intconfig = msg->address_lo;
+	dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
 
 	/*
-	 * kernels with CONFIG_PCI_MSI set the vector in the irq field of
-	 * struct pci_device, so we use that to program the internal
-	 * interrupt register (not config space) with that value. The BIOS
-	 * must still have done the basic MSI setup.
-	 */
-	intvec = pdev->irq;
-	/*
-	 * clear any vector bits there; normally not set but we'll overload
-	 * this for some debug purposes (setting the HTC debug register
-	 * value from software, rather than GPIOs), so it might be set on a
-	 * driver reload.
+	 * If the previous value of dd->ipath_intconfig is zero, we're
+	 * getting configured for the first time, and must not program the
+	 * intconfig register here (it will be programmed later, when the
+	 * hardware is ready).  Otherwise, we should.
 	 */
-	ihandler &= ~0xff0000;
-	/* x86 vector goes in intrinfo[23:16] */
-	ihandler |= intvec << 16;
-	ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, "
-		   "interruptconfig %llx\n", int_handler_addr_lower,
-		   int_handler_addr_upper, intvec,
-		   (unsigned long long) ihandler);
-
-	/* can't program yet, so save for interrupt setup */
-	dd->ipath_intconfig = ihandler;
-	/* keep going, so we find link control stuff also */
-
-	return ihandler != 0;
+	if (prev_intconfig)
+		ipath_ht_intconfig(dd);
 }
 
 /**
@@ -971,12 +963,19 @@ static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
 static int ipath_setup_ht_config(struct ipath_devdata *dd,
 				 struct pci_dev *pdev)
 {
-	int pos, ret = 0;
-	int ihandler = 0;
+	int pos, ret;
+
+	ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
+	if (ret < 0) {
+		ipath_dev_err(dd, "Couldn't create interrupt handler: "
+			      "err %d\n", ret);
+		goto bail;
+	}
+	dd->ipath_irq = ret;
+	ret = 0;
 
 	/*
-	 * Read the capability info to find the interrupt info, and also
-	 * handle clearing CRC errors in linkctrl register if necessary.  We
+	 * Handle clearing CRC errors in linkctrl register if necessary.  We
 	 * do this early, before we ever enable errors or hardware errors,
 	 * mostly to avoid causing the chip to enter freeze mode.
 	 */
@@ -1000,17 +999,9 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd,
 		}
 		if (!(cap_type & 0xE0))
 			slave_or_pri_blk(dd, pdev, pos, cap_type);
-		else if (cap_type == HT_INTR_DISC_CONFIG)
-			ihandler = set_int_handler(dd, pdev, pos);
 	} while ((pos = pci_find_next_capability(pdev, pos,
 						 PCI_CAP_ID_HT)));
 
-	if (!ihandler) {
-		ipath_dev_err(dd, "Couldn't find interrupt handler in "
-			      "config space\n");
-		ret = -ENODEV;
-	}
-
 bail:
 	return ret;
 }
@@ -1360,25 +1351,6 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
 }
 
-static int ipath_ht_intconfig(struct ipath_devdata *dd)
-{
-	int ret;
-
-	if (!dd->ipath_intconfig) {
-		ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
-			      "interrupt address\n");
-		ret = 1;
-		goto bail;
-	}
-
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
-			 dd->ipath_intconfig);	/* interrupt address */
-	ret = 0;
-
-bail:
-	return ret;
-}
-
 /**
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
@@ -1575,6 +1547,14 @@ static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
 	return 0;
 }
 
+static void ipath_ht_free_irq(struct ipath_devdata *dd)
+{
+	free_irq(dd->ipath_irq, dd);
+	ht_destroy_irq(dd->ipath_irq);
+	dd->ipath_irq = 0;
+	dd->ipath_intconfig = 0;
+}
+
 /**
  * ipath_init_iba6110_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1598,6 +1578,7 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
 	dd->ipath_f_setextled = ipath_setup_ht_setextled;
 	dd->ipath_f_get_base_info = ipath_ht_get_base_info;
+	dd->ipath_f_free_irq = ipath_ht_free_irq;
 
 	/*
 	 * initialize chip-specific variables
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index a72ab9d..6af8968 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -851,6 +851,7 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd,
 	int pos, ret;
 
 	dd->ipath_msi_lo = 0;	/* used as a flag during reset processing */
+	dd->ipath_irq = pdev->irq;
 	ret = pci_enable_msi(dd->pcidev);
 	if (ret)
 		ipath_dev_err(dd, "pci_enable_msi failed: %d, "
@@ -1323,6 +1324,12 @@ done:
 	return 0;
 }
 
+static void ipath_pe_free_irq(struct ipath_devdata *dd)
+{
+	free_irq(dd->ipath_irq, dd);
+	dd->ipath_irq = 0;
+}
+
 /**
  * ipath_init_iba6120_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1349,6 +1356,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_cleanup = ipath_setup_pe_cleanup;
 	dd->ipath_f_setextled = ipath_setup_pe_setextled;
 	dd->ipath_f_get_base_info = ipath_pe_get_base_info;
+	dd->ipath_f_free_irq = ipath_pe_free_irq;
 
 	/* initialize chip-specific variables */
 	dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index d9079ee..5652a55 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -710,14 +710,14 @@ static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
 			 * linuxbios development work, and it may happen in
 			 * the future again.
 			 */
-			if (dd->pcidev && dd->pcidev->irq) {
+			if (dd->pcidev && dd->ipath_irq) {
 				ipath_dev_err(dd, "Now %u unexpected "
 					      "interrupts, unregistering "
 					      "interrupt handler\n",
 					      *unexpectp);
-				ipath_dbg("free_irq of irq %x\n",
-					  dd->pcidev->irq);
-				free_irq(dd->pcidev->irq, dd);
+				ipath_dbg("free_irq of irq %d\n",
+					  dd->ipath_irq);
+				dd->ipath_f_free_irq(dd);
 			}
 		}
 		if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
@@ -753,7 +753,7 @@ static void ipath_bad_regread(struct ipath_devdata *dd)
 		if (allbits == 2) {
 			ipath_dev_err(dd, "Still bad interrupt status, "
 				      "unregistering interrupt\n");
-			free_irq(dd->pcidev->irq, dd);
+			dd->ipath_f_free_irq(dd);
 		} else if (allbits > 2) {
 			if ((allbits % 10000) == 0)
 				printk(".");
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 7c43669..986b212 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -213,6 +213,8 @@ struct ipath_devdata {
 	void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
 	/* fill out chip-specific fields */
 	int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
+	/* free irq */
+	void (*ipath_f_free_irq)(struct ipath_devdata *);
 	struct ipath_ibdev *verbs_dev;
 	struct timer_list verbs_timer;
 	/* total dwords sent (summed from counter) */
@@ -328,6 +330,8 @@ struct ipath_devdata {
 	/* so we can rewrite it after a chip reset */
 	u32 ipath_pcibar1;
 
+	/* interrupt number */
+	int ipath_irq;
 	/* HT/PCI Vendor ID (here for NodeInfo) */
 	u16 ipath_vendorid;
 	/* HT/PCI Device ID (here for NodeInfo) */
@@ -869,9 +873,6 @@ int ipath_device_create_group(struct device *, struct ipath_devdata *);
 void ipath_device_remove_group(struct device *, struct ipath_devdata *);
 int ipath_expose_reset(struct device *);
 
-int ipath_diagpkt_add(void);
-void ipath_diagpkt_remove(void);
-
 int ipath_init_ipathfs(void);
 void ipath_exit_ipathfs(void);
 int ipathfs_add_device(struct ipath_devdata *);
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index a545610..acdee33 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1487,7 +1487,7 @@ int ipath_register_ib_device(struct ipath_devdata *dd)
 	idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA;
 	idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS;
 	idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS;
-	idev->pma_counter_select[5] = IB_PMA_PORT_XMIT_WAIT;
+	idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT;
 	idev->link_width_enabled = 3;	/* 1x or 4x */
 
 	/* Snapshot current HW counters to "clear" them. */